| Age | Commit message (Collapse) | Author |
|---|
|
The strings we were showing from po2msg didn't exactly match those
of msgfmt's --statistics output so we didn't show quite the same
results when building git-gui's message files. Now we're closer
to what msgfmt shows (at least for an en_US locale) so the make
output matches.
I noticed that the fuzzy translation count is off by one for the
current po/zh_cn.po file. Not sure why and I'm not going to try
and debug it at this time as the po2msg is strictly a fallback,
users building from source really should prefer msgfmt.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If msgfmt fails with exit code 127 that typically means the program
is not found in the user's PATH and thus cannot be executed by make.
In such a case we can try to fallback to the Tcl based po2msg program
that we distributed with git-gui, as it does a "good enough" job.
We still don't default to po2msg.sh however as it does not perform
a lot of the sanity checks that msgfmt does, and quite a few of
those are too useful to give up.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If the horizontal scrollbar isn't currently visible (because it has
not been needed) but we get an update to the scroll port we may find
the scrollbar window exists but the Tcl command doesn't. Apparently
it is possible for Tk to have partially destroyed the scrollbar by
removing the Tcl procedure name but still leaving the widget name in
the window registry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Junio noticed this was incorrectly added in ISO-8859-1 but it should
be in UTF-8 (as the headers claim UTF-8, and our convention is to use
only UTF-8).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The code we use to test if a hook is executable or not differs on
Cygwin from the normal POSIX case. Rather then repeating that for
all three hooks we call in our commit code path we can place the
common logic into a global procedure and invoke it when necessary.
This also lets us get rid of the ugly "|& cat" we were using before
as we can now rely on the Tcl 8.4 feature of "2>@1" or fallback to
the "|& cat" when necessary.
The post-commit hook is now run through the same API, but its outcome
does not influence the commit status. As a result we now show any of
the errors from the post-commit hook in a dialog window, instead of on
the user's tty that was used to launch git-gui. This resolves a long
standing bug related to not getting errors out of the post-commit hook
when launched under git-gui.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
During i18n translation work this message was partially broken
by using "append" instead of "strcat" to join the two different
parts of the message together.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Under core Git the git-commit tool will invoke the commit-msg hook
if it exists and is executable to the user running git-commit. As
a hook it has some limited value as it cannot alter the commit, but
it can modify the message the user is attempting to commit. It is
also able to examine the message to ensure it conforms to some local
standards/conventions.
Since the hook takes the name of a temporary file holding the message
as its only parameter we need to move the code that creates the temp
file up earlier in our commit code path, and then pass through that
file name to the latest stage (where we call git-commit-tree). We let
the hook alter the file as it sees fit and we don't bother to look at
its content again until the commit succeeded and we need the subject
for the reflog update.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
gg_libdir is converted to an absolute Windows path on Cygwin,
but a later step attempts to prefix $DESTDIR to install to a
staging directory. Explicitly separate the uses of gg_libdir for
these two purposes so installation to $DESTDIR will work.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If we apply a hunk in either direction this may change the file's
status. For example if a file is completely unstaged, and has at
least two hunks in it and the user stages one hunk the file will
change from "Modified, not staged" to "Portions staged for commit".
Resetting the file path causes our trace on this variable to fire;
that trace is used to update the file header in the diff viewer to
the file's current status.
Noticed by Johannes Sixt.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Often users setup a few source files and get a project rolling
before they create a Git repository for it. In such cases the
core Git tools allow users to initialize a new repository by
simply running `git init` at the desired root level directory.
We need to allow the same situation in git-gui; if the user is
trying to make a new repository we should let them do that to any
location they chose. If the directory already exists and already
has files contained within it we still should allow the user to
create a repository there. However we still need to disallow
creating a repository on top of an existing repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Here are some of the choices made to translate Git Gui to french:
- commit -> "commit" (noun) or "commiter" (verb)
- stage (index) -> "pré-commit" (noun) or "pré-commiter" (verb)
- (re)scan -> "(re)synchroniser"
- reset -> "réinitialiser"
- checkout -> "emprunt" (noun) or "emprunter" (verb)
- revision expression -> "expression de révison"
I am not completely happy with these, but it's a start...
[sp: Inserted a missing LF in message on line 466]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Change translation of "clone" back to "klonen" because "kopieren" is a
much broader term than this particular git action.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
I broke this extremely cool feature in 1ac17950,
but it is rather easy to fix this. Sorry for that.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
"revert" translated as "verwerfen".
"hunk" translated as "Kontext".
Several menu items reworded to be shorter.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Concatenating commit log messages from multiple commits works better
when all of the commits end with a clean line break.
Its good to be strict in what you create, and lenient in what you
accept, and since we're creating here, we should always try to
Do The Right Thing(tm).
Signed-off-by: Bernt Hansen <bernt@alumni.uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
|
The mapping of Windows vs Cygwin/Posix paths is arbitrary and not knowable
from the Posix side, so logic to determine whether to use relative paths
to locate the git-gui library just does not work on Cygwin. Fix this to
unconditionally use absolute path on Cygwin. (This fixes a regression
from 1.5.4).
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Johannes Sixt pointed out the diff headers "old mode ..." and
"new mode ..." were not being parsed properly by git-gui. We
now include them in the diff viewer for a file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
"Stage/Unstage Hunk" is probably the most frequently used command of the
patch context menu *and* it is not available in some other form than
the context menu. Therefore, it should go to the top. "Less Context" and
"More Context" entries are also not easily available otherwise, and are
therefore, moved second. The other entries are available via key strokes
(Copy, Paste, Refresh) or rarly used (Font Size, Options) and can go last.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Previusly, there was only a 16x16 image, which looked very distorted.
Here we add a 32x32 version, and also make the image sharper.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The install-sh script as shipped with automake requires a space between
the -m switch and its argument. Since this is also the regular way of
doing it with other install implementations this change inserts the
missing space.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Any program using getopt or getopt_long will stop processing options
once a non-option argument has been encountered, if POSIXLY_CORRECT is
set. Therefore, reorder the command-line arguments to put options
first, so that the msgfmt call works in this scenario.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.ath.cx>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Updates and fixes:
* current -> attuale
* failed -> impossibile/non riuscito
* corrupt -> danneggiato
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Aaron Digulla suggested we bind Ctrl-T or Cmd-T to "Stage To Commit"
menu action so it can be easily accessed from the keyboard.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Previously we allowed users to tweak their font weight to be bold by
setting it manually in their ~/.gitconfig prior to starting git-gui.
This was broken in ae0754ac9a24afa2693246222fc078fe9c133b3a when
Simon set the font weight to normal by default, overridding whatever
we found from the ~/.gitconfig file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Resolve an earlier suggestion from Christian.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This updates the Japanese translation file.
Signed-off-by: しらいしななこ <nanako3@bluebottle.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Fixed some spelling mistakes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The "--statistics" option was ignored so far; no longer. Now we have
a message similar to that of msgfmt. (Untranslated, though ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Do not generate translations when the translated message is empty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
As Christian Stimming pointed out, entries which are "fuzzy" need to
be checked by human translators, and cannot be used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
If a translation string uses a format character we don't have an
argument for then it may throw an error when we attempt to format
the translation. In this case switch back to the default format
that comes with the program (aka the English translation).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Make sure we get errors from git-update-index
Conflicts:
lib/index.tcl
|
|
I'm seeing a lot of silent failures from git-update-index on
Windows and this is leaving the index.lock file intact, which
means users are later unable to perform additional operations.
When the index is locked behind our back and we are unable to
use it we may need to allow the user to delete the index lock
and try again. However our UI state is probably not currect
as we have assumed that some changes were applied but none of
them actually did. A rescan is the easiest (in code anyway)
solution to correct our UI to show what the index really has
(or doesn't have).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In particular many screw-ups after po regeneration were fixed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The most important changes are:
- Git version cannot be determined... (lost in 57364320bf)
- git-gui: fatal error
Some changes need the second opinion (search for TOVERIFY), some changes are just copies (search for "carbon copy").
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
Conflicts:
lib/commit.tcl
lib/console.tcl
|
|
Git progress bars from tools like git-push and git-fetch use CR
to skip back to the start of the current line and redraw it with
an updated progress. We were doing this in our Tk widget but had
failed to skip the CR, which Tk doesn't draw well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Post Git 1.5.3 a new style progress bar has been introduced that
uses only one line rather than two. The formatting of the completed
and total section is also slightly different so we must adjust our
regexp to match. Unfortunately both styles are in active use by
different versions of Git so we need to look for both.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
