| Age | Commit message (Collapse) | Author |
|---|
|
"git branch --list" learned to show branches that are checked out
in other worktrees connected to the same repository prefixed with
'+', similar to the way the currently checked out branch is shown
with '*' in front.
* nb/branch-show-other-worktrees-head:
branch: add worktree info on verbose output
branch: update output to include worktree info
ref-filter: add worktreepath atom
|
|
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test
|
|
The output of git branch is modified to mark branches checked out in a
linked worktree with a "+" and color them in cyan (in contrast to the
current branch, which will still be denoted with a "*" and colored in green)
This is meant to communicate to the user that the branches that are
marked or colored will behave differently from other branches if the user
attempts to check them out or delete them, since branches checked out in
another worktree cannot be checked out or deleted.
Signed-off-by: Nickolai Belakovski <nbelakovski@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we ran something like
$ git checkout -b test master...
it would fail with the message
fatal: Not a valid object name: 'master...'.
This was caused by the call to `create_branch` where `start_name` is
expected to be a valid rev. However, git-checkout allows the branch to
be a valid _merge base_ rev (i.e. with a "...") so it was possible for
an invalid rev to be passed in.
Make `create_branch` accept a merge base rev so that this case does not
error out.
As a side-effect, teach git-branch how to handle merge base revs as
well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git branch -D <name>" is run, Git usually first checks if that
branch is currently checked out. But this check is not performed if the
Git directory of that repository is not at "<repo>/.git", which is the
case if that repository is a submodule that has its Git directory stored
as "super/.git/modules/<repo>", for example. This results in the branch
being deleted even though it is checked out.
This is because get_main_worktree() in worktree.c sets is_bare on a
worktree only using the heuristic that a repo is bare if the worktree's
path does not end in "/.git", and not bare otherwise. This is_bare code
was introduced in 92718b7438 ("worktree: add details to the worktree
struct", 2015-10-08), following a pre-core.bare heuristic. This patch
does 2 things:
- Teach get_main_worktree() to use is_bare_repository() instead,
introduced in 7d1864ce67 ("Introduce is_bare_repository() and
core.bare configuration variable", 2007-01-07) and updated in
e90fdc39b6 ("Clean up work-tree handling", 2007-08-01). This solves
the "git branch -D <name>" problem described above. However...
- If a repository has core.bare=1 but the "git" command is being run
from one of its secondary worktrees, is_bare_repository() returns
false (which is fine, since there is a worktree available). However,
treating the main worktree as non-bare when it is bare causes issues:
for example, failure to delete a branch from a secondary worktree
that is referred to by a main worktree's HEAD, even if that main
worktree is bare.
In order to avoid that, also check core.bare when setting is_bare. If
core.bare=1, trust it, and otherwise, use is_bare_repository().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for configuring default sort ordering for git branches. Command
line option will override this configured value, using the exact same
syntax.
Signed-off-by: Samuel Maftoul <samuel.maftoul@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for deprecating "-l", let's make sure we're
using the recommended option ourselves.
This patch just mechanically converts "branch -l" to "branch
--create-reflog". Note that with the exception of the
actual "--create-reflog" test, we could actually remove "-l"
entirely from most of these callers. That's because these
days core.logallrefupdates defaults to true in a non-bare
repository.
I've left them in place, though, since they serve to
document the expectation of the test, even if they are
technically noops.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test checks that the "-l" option creates a reflog. But
in fact we'd create one even without it, since the default
in a non-bare repository is to do so. Let's unset the config
so we can be sure our "-l" option is kicking in.
Note that we can't do this with test_config, since that
would leave the variable unset after our test finishes,
confusing downstream tests (the helper is not not smart
enough to restore the previous value, and just always runs
test_unconfig).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A test title has been reworded to clarify it.
* ks/branch-set-upstream:
t3200: clarify description of --set-upstream test
|
|
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17). The change did not completely remove the command
due to an issue noted in the commit's log message.
So, a test was added to ensure that a command which uses the
'--set-upstream' option fails instead of silently acting as an alias
for the '--set-upstream-to' option due to option parsing features.
To avoid confusion, clarify that the option is disabled intentionally
in the corresponding test description.
The test is expected to be around as long as we intentionally fail
on seeing the '--set-upstream' option which in turn we expect to
do for a period of time after which we can be sure that existing
users of '--set-upstream' are aware that the option is no
longer supported.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Quite a many tests assumed that newly created refs are made as
loose refs using the files backend, which have been updated to use
proper plumbing like rev-parse and update-ref, to avoid breakage
once we start using different ref backends.
* cc/tests-without-assuming-ref-files-backend:
t990X: use '.git/objects' as 'deep inside .git' path
t: make many tests depend less on the refs being files
|
|
Many tests are very focused on the file system representation of the
loose and packed refs code. As there are plans to implement other
ref storage systems, let's migrate these tests to a form that test
the intent of the refs storage system instead of it internals.
This will make clear to readers that these tests do not depend on
which ref backend is used.
The internals of the loose refs backend are still tested in
t1400-update-ref.sh, whereas the tests changed in this patch focus
on testing other aspects.
This patch just takes care of many low hanging fruits. It does not
try to completely solves the issue.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch all uses of $_z40 to $ZERO_OID so that they work correctly with
larger hashes. This commit was created by using the following sed
command to modify all files in the t directory except t/test-lib.sh:
sed -i 's/\$_z40/$ZERO_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --list" shows an in-progress rebase as:
* (no branch, rebasing <branch>)
master
...
However, if the rebase is started from a detached HEAD, then there is no
<branch>, and it would attempt to print a NULL pointer. The previous
commit fixed this problem, so add a test to verify that the output is
sane in this situation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test typofix.
* ks/t3200-typofix:
t/t3200: fix a typo in a test description
|
|
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our call to refs_read_raw_ref() fails, we check errno to
see if the ref is simply missing, or if we encountered a
more serious error. If it's just missing, then in "write"
mode (i.e., when RESOLVE_REFS_READING is not set), this is
perfectly fine.
However, checking for ENOENT isn't sufficient to catch all
missing-ref cases. In the filesystem backend, we may also
see EISDIR when we try to resolve "a" and "a/b" exists.
Likewise, we may see ENOTDIR if we try to resolve "a/b" and
"a" exists. In both of those cases, we know that our
resolved ref doesn't exist, but we return an error (rather
than reporting the refname and returning a null sha1).
This has been broken for a long time, but nobody really
noticed because the next step after resolving without the
READING flag is usually to lock the ref and write it. But in
both of those cases, the write will fail with the same
errno due to the directory/file conflict.
There are two cases where we can notice this, though:
1. If we try to write "a" and there's a leftover directory
already at "a", even though there is no ref "a/b". The
actual write is smart enough to move the empty "a" out
of the way.
This is reasonably rare, if only because the writing
code has to do an independent resolution before trying
its write (because the actual update_ref() code handles
this case fine). The notes-merge code does this, and
before the fix in the prior commit t3308 erroneously
expected this case to fail.
2. When resolving symbolic refs, we typically do not use
the READING flag because we want to resolve even
symrefs that point to unborn refs. Even if those unborn
refs could not actually be written because of d/f
conflicts with existing refs.
You can see this by asking "git symbolic-ref" to report
the target of a symref pointing past a d/f conflict.
We can fix the problem by recognizing the other "missing"
errnos and treating them like ENOENT. This should be safe to
do even for callers who are then going to actually write the
ref, because the actual writing process will fail if the d/f
conflict is a real one (and t1404 checks these cases).
Arguably this should be the responsibility of the
files-backend to normalize all "missing ref" errors into
ENOENT (since something like EISDIR may not be meaningful at
all to a database backend). However other callers of
refs_read_raw_ref() may actually care about the distinction;
putting this into resolve_ref() is the minimal fix for now.
The new tests in t1401 use git-symbolic-ref, which is the
most direct way to check the resolution by itself.
Interestingly we actually had a test that setup this case
already, but we only used it to verify that the funny state
could be overwritten, not that it could be resolved.
We also add a new test in t3200, as "branch -m" was the
original motivation for looking into this. What happens is
this:
0. HEAD is pointing to branch "a"
1. The user asks to rename "a" to "a/b".
2. We create "a/b" and delete "a".
3. We then try to update any worktree HEADs that point to
the renamed ref (including the main repo HEAD). To do
that, we have to resolve each HEAD. But now our HEAD is
pointing at "a", and we get EISDIR due to the loose
"a/b". As a result, we think there is no HEAD, and we
do not update it. It now points to the bogus "a".
Interestingly this case used to work, but only accidentally.
Before 31824d180d (branch: fix branch renaming not updating
HEADs correctly, 2017-08-24), we'd update any HEAD which we
couldn't resolve. That was wrong, but it papered over the
fact that we were incorrectly failing to resolve HEAD.
So while the bug demonstrated by the git-symbolic-ref is
quite old, the regression to "branch -m" is recent.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
|
|
When creating a new branch B by copying the branch A that happens to
be the current branch, it also updates HEAD to point at the new
branch. It probably was made this way because "git branch -c A B"
piggybacked its implementation on "git branch -m A B",
This does not match the usual expectation. If I were sitting on a
blue chair, and somebody comes and repaints it to red, I would
accept ending up sitting on a chair that is now red (I am also OK to
stand, instead, as there no longer is my favourite blue chair). But
if somebody creates a new red chair, modelling it after the blue
chair I am sitting on, I do not expect to be booted off of the blue
chair and ending up on sitting on the new red one.
Let's fix this before it hits 'next'. Those who want to create a
new branch and switch to it can do "git checkout B" after doing a
"git branch -c B", and if that operation is so useful and deserves a
short-hand way to do so, perhaps extend "git checkout -b B" to copy
configurations while creating the new branch B.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -M a b" while on a branch that is completely unrelated
to either branch a or branch b misbehaved when multiple worktree
was in use. This has been fixed.
* nd/worktree-kill-parse-ref:
branch: fix branch renaming not updating HEADs correctly
|
|
There are two bugs that sort of work together and cause
problems. Let's start with one in replace_each_worktree_head_symref.
Before fa099d2322 (worktree.c: kill parse_ref() in favor of
refs_resolve_ref_unsafe() - 2017-04-24), this code looks like this:
if (strcmp(oldref, worktrees[i]->head_ref))
continue;
set_worktree_head_symref(...);
After fa099d2322, it is possible that head_ref can be NULL. However,
the updated code takes the wrong exit. In the error case (NULL
head_ref), we should "continue;" to the next worktree. The updated
code makes us _skip_ "continue;" and update HEAD anyway.
The NULL head_ref is triggered by the second bug in add_head_info (in
the same commit). With the flag RESOLVE_REF_READING, resolve_ref_unsafe()
will abort if it cannot resolve the target ref. For orphan checkouts,
HEAD always points to an unborned branch, resolving target ref will
always fail. Now we have NULL head_ref. Now we always update HEAD.
Correct the logic in replace_ function so that we don't accidentally
update HEAD on error. As it turns out, correcting the logic bug above
breaks branch renaming completely, thanks to the second bug.
"git branch -[Mm]" does two steps (on a normal checkout, no orphan!):
- rename the branch on disk (e.g. refs/heads/abc to refs/heads/def)
- update HEAD if it points to the branch being renamed.
At the second step, since the branch pointed to by HEAD (e.g. "abc") no
longer exists on disk, we run into a temporary orphan checkout situation
that has been just corrected to _not_ update HEAD. But we need to update
HEAD since it's not actually an orphan checkout. We need to update HEAD
to move out of that orphan state.
Correct add_head_info(), remove RESOLVE_REF_READING flag. With the flag
gone, we should always return good "head_ref" in orphan checkouts (either
temporary or permanent). With good head_ref, things start to work again.
Noticed-by: Nish Aravamudan <nish.aravamudan@canonical.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '--set-upstream' option of branch was deprecated in b347d06b
("branch: deprecate --set-upstream and show help if we detect
possible mistaken use", 2012-08-30) and has been planned for removal
ever since.
In order to prevent "--set-upstream" on a command line from being taken as
an abbreviated form of "--set-upstream-to", explicitly catch "--set-upstream"
option and die, instead of just removing it from the list of options.
Before this change, an attempt to use "--set-upstream" resulted in:
$ git branch
* master
$ git branch --set-upstream origin/master
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
$ echo $?
0
$ git branch
* master
origin/master
With this change, the behaviour becomes like this:
$ git branch
* master
$ git branch --set-upstream origin/master
fatal: the '--set-upstream' option is no longer supported. Please use '--track' or '--set-upstream-to' instead.
$ echo $?
128
$ git branch
* master
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoiding the clean up step of tests may help in some cases but in other
cases they cause the other unrelated tests to fail for unobvious reasons.
It's better to cleanup a few things to keep other tests from failing
as a result of it.
So, cleanup a cruft left behind by an old test in order for the changes that
are to be introduced to be independent of it.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reflog-walk system works by putting a ref's tip into the
pending queue, and then "traversing" the reflog by
pretending that the parent of each commit is the previous
reflog entry.
This causes a number of user-visible oddities, as documented
in t1414 (and the commit message which introduced it). We
can fix all of them in one go by replacing the fake-reflog
system with a much simpler one: just keeping a list of
reflogs to show, and walking through them entry by entry.
The implementation is fairly straight-forward, but there are
a few items to note:
1. We obviously must skip calling add_parents_to_list()
when we are traversing reflogs, since we do not want to
walk the original parents at all. As a result, we must call
try_to_simplify_commit() ourselves.
There are other parts of add_parents_to_list() we skip,
as well, but none of them should matter for a reflog
traversal:
- We do not allow UNINTERESTING commits, nor
symmetric ranges (and we bail when these are used
with "-g").
- Using --source makes no sense, since we aren't
traversing. The reflog selector shows the same
information with more detail.
- Using --first-parent is still sensible, since you
may want to see the first-parent diff for each
entry. But since we're not traversing, we don't
need to cull the parent list here.
2. Since we now just walk the reflog entries themselves,
rather than starting with the ref tip, we now look at
the "new" field of each entry rather than the "old"
(i.e., we are showing entries, not faking parents).
This removes all of the tricky logic around skipping
past root commits.
But note that we have no way to show an entry with the
null sha1 in its "new" field (because such a commit
obviously does not exist). Normally this would not
happen, since we delete reflogs along with refs, but
there is one special case. When we rename the currently
checked out branch, we write two reflog entries into
the HEAD log: one where the commit goes away, and
another where it comes back.
Prior to this commit, we show both entries with
identical reflog messages. After this commit, we show
only the "comes back" entry. See the update in t3200
which demonstrates this.
Arguably either is fine, as the whole double-entry
thing is a bit hacky in the first place. And until a
recent fix, we truncated the traversal in such a case
anyway, which was _definitely_ wrong.
3. We show individual reflogs in order, but choose which
reflog to show at each stage based on which has the
most recent timestamp. This interleaves the output
from multiple reflogs based on date order, which is
probably what you'd want with limiting like "-n 30".
Note that the implementation aims for simplicity. It
does a linear walk over the reflog queue for each
commit it pulls, which may perform badly if you
interleave an enormous number of reflogs. That seems
like an unlikely use case; if we did want to handle it,
we could probably keep a priority queue of reflogs,
ordered by the timestamp of their current tip entry.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 39ee4c6c2f (branch: record creation of renamed branch
in HEAD's log, 2017-02-20), a rename on the currently
checked out branch will create two entries in the HEAD
reflog: one where the branch goes away (switching to the
null oid), and one where it comes back (switching away from
the null oid).
This confuses the reflog-walk code. When walking backwards,
it first sees the null oid in the "old" field of the second
entry. Thanks to the "root commit" logic added by 71abeb753f
(reflog: continue walking the reflog past root commits,
2016-06-03), we keep looking for the next entry by scanning
the "new" field from the previous entry. But that field is
also null! We need to go just a tiny bit further, and look
at its "old" field. But with the current code, we decide the
reflog has nothing else to show and just give up. To the
user this looks like the reflog was truncated by the rename
operation, when in fact those entries are still there.
This patch does the absolute minimal fix, which is to look
back that one extra level and keep traversing.
The resulting behavior may not be the _best_ thing to do in
the long run (for example, we show both reflog entries each
with the same commit id), but it's a simple way to fix the
problem without risking further regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the ability to --copy a branch and its reflog and configuration,
this uses the same underlying machinery as the --move (-m) option
except the reflog and configuration is copied instead of being moved.
This is useful for e.g. copying a topic branch to a new version,
e.g. work to work-2 after submitting the work topic to the list, while
preserving all the tracking info and other configuration that goes
with the branch, and unlike --move keeping the other already-submitted
branch around for reference.
Like --move, when the source branch is the currently checked out
branch the HEAD is moved to the destination branch. In the case of
--move we don't really have a choice (other than remaining on a
detached HEAD) and in order to keep the functionality consistent, we
are doing it in similar way for --copy too.
The most common usage of this feature is expected to be moving to a
new topic branch which is a copy of the current one, in that case
moving to the target branch is what the user wants, and doesn't
unexpectedly behave differently than --move would.
One outstanding caveat of this implementation is that:
git checkout maint &&
git checkout master &&
git branch -c topic &&
git checkout -
Will check out 'maint' instead of 'master'. This is because the @{-N}
feature (or its -1 shorthand "-") relies on HEAD reflogs created by
the checkout command, so in this case we'll checkout maint instead of
master, as the user might expect. What to do about that is left to a
future change.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test for how 'git branch -m' handles the renaming of multiple
config sections existing for one branch.
The config format we use is hybrid machine/human editable, and we do
our best to preserve the likes of comments and formatting when editing
the file with git-config.
This adds a test for the currently expected semantics in the face of
some rather obscure edge cases which are unlikely to occur in
practice.
Helped-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test for the case when only one parameter is passed to '-m'
(move/rename) option.
For example - if 'git branch -m bbb' is run while checked out on aaa
branch, it should rename the currently checked out branch to bbb.
There was no test for this particular case with only one parameter
for -m option. However, there's one similar test case for -M option.
Add test for making sure HEAD points to the bbb (new branch name). Also
add a test for making sure the reflog that is moved to 'bbb' retains
entries created for the currently checked out branch. Note that since
the topmost entry on reflog for bbb will be about branch creation, we
compare bbb@{1} (instead of bbb@{0}) with aaa@{0} to make sure the
reflog for bbb retains entries from aaa.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* sd/t3200-typofix:
branch test: fix invalid config key access
|
|
Test fix.
* sd/t3200-typofix:
branch test: fix invalid config key access
|
|
Fixes the test by changing "branch.s/s/dummy" to "branch.s/s.dummy" which is
the right way of accessing config key "branch.s/s.dummy". Purpose of
this test is to confirm that this key doesn't exist after the branch
"s/s" has been renamed to "s".
Earlier it was trying to access invalid config key and hence was getting
an error. However, this wasn't caught because we were expecting the
command to fail for other reason as mentioned above.
Signed-off-by: Sahil Dua <sahildua2305@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
|
|
Change the behavior of specifying --merged & --no-merged to be an
error, instead of silently picking the option that was provided last.
Subsequent changes of mine add a --no-contains option in addition to
the existing --contains. Providing both of those isn't an error, and
has actual meaning.
Making its cousins have different behavior in this regard would be
confusing to the user, especially since we'd be silently disregarding
some of their command-line input.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch --list" takes the "--abbrev" and "--no-abbrev" options
to control the output of the object name in its "-v"(erbose)
output, but a recent update started ignoring them; this fixes it
before the breakage reaches to any released version.
* kn/ref-filter-branch-list:
branch: honor --abbrev/--no-abbrev in --list mode
|
|
When the "branch --list" command was converted to use the --format
facility from the ref-filter API, we forgot to honor the --abbrev
setting in the default output format and instead used a hardcoded
"7".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further preparatory work on the refs API before the pluggable
backend series can land.
* mh/split-under-lock: (33 commits)
lock_ref_sha1_basic(): only handle REF_NODEREF mode
commit_ref_update(): remove the flags parameter
lock_ref_for_update(): don't resolve symrefs
lock_ref_for_update(): don't re-read non-symbolic references
refs: resolve symbolic refs first
ref_transaction_update(): check refname_is_safe() at a minimum
unlock_ref(): move definition higher in the file
lock_ref_for_update(): new function
add_update(): initialize the whole ref_update
verify_refname_available(): adjust constness in declaration
refs: don't dereference on rename
refs: allow log-only updates
delete_branches(): use resolve_refdup()
ref_transaction_commit(): correctly report close_ref() failure
ref_transaction_create(): disallow recursive pruning
refs: make error messages more consistent
lock_ref_sha1_basic(): remove unneeded local variable
read_raw_ref(): move docstring to header file
read_raw_ref(): improve docstring
read_raw_ref(): rename symref argument to referent
...
|
|
The test functions test_i18ncmp and test_i18ngrep pretend success if run
under GETTEXT_POISON. By using those functions to test output which is
correctly marked as translatable, enables one to detect if the strings
newly marked for translation are from plumbing output. If they are
indeed from plumbing, the test would fail, and the string should be
unmarked, since it is not seen by users.
Thus, it is productive to not have false positives when running the test
under GETTEXT_POISON. This commit replaces normal test functions by
their i18n aware variants in use-cases know to be correctly marked for
translation, suppressing false positives.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming refs, don't dereference either the origin or the destination
before renaming.
The origin does not need to be dereferenced because it is presently
forbidden to rename symbolic refs.
Not dereferencing the destination fixes a bug where renaming on top of
a broken symref would use the pointed-to ref name for the moved
reflog.
Add a test for the reflog bug.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
|
|
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.
This is the current behavior, /path/to/wt's HEAD is not updated:
% git worktree list
/path/to 2c3c5f2 [master]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m master master2
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 2c3c5f2 [oldname]
% git branch -m oldname newname
% git worktree list
/path/to 2c3c5f2 [master2]
/path/to/wt 0000000 [oldname]
This patch fixes this issue by updating all relevant worktree HEADs
when renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a branch is checked out by current working tree, deleting the
branch is forbidden. However when the branch is checked out only by
other working trees, deleting incorrectly succeeds.
Use find_shared_symref() to check if the branch is in use, not just
comparing with the current working tree's HEAD.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we try to unset upstream configurations we do not check
return codes for the `git_config_set` functions. As those may
indicate that we were unable to unset the respective
configuration we may exit successfully without any error message
while in fact the upstream configuration was not unset.
Fix this by dying with an error message when we cannot unset the
configuration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting up a new tracking branch fails due to issues with
the configuration file we do not report any errors to the user
and pretend setting the tracking branch succeeded.
Setting up the tracking branch is handled by the
`install_branch_config` function. We do not want to simply die
there as the function is not only invoked when explicitly setting
upstream information with `git branch --set-upstream-to=`, but
also by `git push --set-upstream` and `git clone`. While it is
reasonable to die in the explict first case, we would lose
information in the latter two cases, so we only print the error
message but continue the program as usual.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
|
|
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
