| Age | Commit message (Collapse) | Author |
|---|
|
Every once in a while someone complains to the mailing list to have
run into this weird assertion[1]. The usual response from the mailing
list is link to old discussions[2], and acknowledging the problem
stating it is known.
This patch accomplishes two things:
1. Switch assert() to die("BUG") to give a more readable message.
2. Take one of the cases where we hit a BUG and turn it into a normal
"there was something wrong with the input" message.
This assertion triggered for cases where there wasn't a programming
bug, but just bogus input. In particular, if the user asks for a
pathspec that is inside a submodule, we shouldn't assert() or
die("BUG"); we should tell the user their request is bogus.
The only reason we did not check for it, is the expensive nature
of such a check, so callers avoid setting the flag
PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE. However when we die due
to bogus input, the expense of CPU cycles spent outweighs the user
wondering what went wrong, so run that check unconditionally before
dying with a more generic error message.
Note: There is a case (e.g. "git -C submodule add .") in which we call
strip_submodule_slash_expensive, as git-add requests it via the flag
PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE, but the assert used to
trigger nevertheless, because the flag PATHSPEC_LITERAL was not set,
such that we executed
if (item->nowildcard_len < prefixlen)
item->nowildcard_len = prefixlen;
and prefixlen was not adapted (e.g. it was computed from "submodule/")
So in the die_inside_submodule_path function we also need handle paths,
that were stripped before, i.e. are the exact submodule path. This
is why the conditions in die_inside_submodule_path are slightly
different than in strip_submodule_slash_expensive.
[1] https://www.google.com/search?q=item-%3Enowildcard_len
[2] http://git.661346.n2.nabble.com/assert-failed-in-submodule-edge-case-td7628687.html
https://www.spinics.net/lists/git/msg249473.html
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Give a more relevant name to the prefix_pathspec function as it does
more than just prefix a pathspec element.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few small changes to improve readability. This is done by grouping related
assignments, adding blank lines, ensuring lines are <80 characters, and
adding additional comments.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the logic responsible for stripping the trailing slash on
pathspecs referencing submodules into its own function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the logic responsible for the magic in a pathspec element
into its own function.
Also avoid calling into the parsing functions when
`PATHSPEC_LITERAL_PATH` is specified since it causes magic to be
ignored and all paths to be treated as literals.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the logic responsible for parsing long magic into its own
function. As well as hoist the prefix check logic outside of the inner
loop as there isn't anything that needs to be done after matching
"prefix:".
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Factor out the logic responsible for parsing short magic into its own
function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create helper functions to read the global magic environment variables
in additon to factoring out the global magic gathering logic into its
own function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The logic used to prefix an original pathspec element with 'prefix'
magic is more general purpose and can be used for more than just short
magic. Remove the extra code paths and rename 'prefix_short_magic' to
'prefix_magic' to better indicate that it can be used in more general
situations.
Also, slightly change the logic which decides when to prefix the
original element in order to prevent a pathspec of "." from getting
converted to "" (empty string).
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For better clarity, always show the mnemonic and name of the unsupported
magic being used. This lets users have a more clear understanding of
what magic feature isn't supported. And if they supplied a mnemonic,
the user will be told what its corresponding name is which will allow
them to more easily search the man pages for that magic type.
This also avoids passing an extra parameter around the pathspec
initialization code.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Removed unused variable 'n' from the 'unsupported_magic()' function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'original' string entry in a pathspec_item is only duplicated some
of the time, instead always make a copy of the original and take
ownership of the memory.
Since both 'match' and 'original' string entries in a pathspec_item are
owned by the pathspec struct, they need to be freed when clearing the
pathspec struct (in 'clear_pathspec()') and duplicated when copying the
pathspec struct (in 'copy_pathspec()').
Also change the type of 'match' and 'original' to 'char *' in order to
more explicitly show the ownership of the memory.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all callers of the old 'get_pathspec' interface have been
migrated to use the new pathspec struct interface it can be removed
from the codebase.
Since there are no more users of the '_raw' field in the pathspec struct
it can also be removed. This patch also removes the old functionality
of modifying the const char **argv array that was passed into
parse_pathspec. Instead the constructed 'match' string (which is a
pathspec element with the prefix prepended) is only stored in its
corresponding pathspec_item entry.
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty string used as a pathspec element has always meant
'everything matches', but it is too easy to write a script that
finds a path to remove in $path and run 'git rm "$paht"', which
ends up removing everything. Start warning about this use of an
empty string used for 'everything matches' and ask users to use a
more explicit '.' for that instead.
The hope is that existing users will not mind this change, and
eventually the warning can be turned into a hard error, upgrading
the deprecation into removal of this (mis)feature.
* ex/deprecate-empty-pathspec-as-match-all:
pathspec: warn on empty strings as pathspec
|
|
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
|
|
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty string as a pathspec element matches all paths. A buggy
script, however, could accidentally assign an empty string to a
variable that then gets passed to a Git command invocation, e.g.:
path=... compute a path to be removed in $path ...
git rm -r "$paht"
which would unintentionally remove all paths in the current
directory.
The fix for this issue requires a two-step approach. As there may be
existing scripts that knowingly use empty strings in this manner,
the first step simply gives a warning that (1) tells that an empty
string will become an invalid pathspec element and (2) asks the user
to use "." if they mean to match all.
For step two, a follow-up patch several release cycles later will
remove the warning and throw an error instead.
This patch is the first step.
Signed-off-by: Emily Xie <emilyxxie@gmail.com>
Reported-by: David Turner <novalis@novalis.org>
Mentored-by: Michail Denchev <mdenchev@gmail.com>
Thanks-to: Sarah Sharp <sarah@thesharps.us> and James Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
use xmemdupz() to allocate copies of strings given by start and length
use xcalloc() to allocate zero-initialized memory
|
|
Use xcalloc() instead of xmalloc() followed by memset() to allocate
and zero out memory because it's shorter and avoids duplicating the
function parameters.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce "negative pathspec" magic, to allow "git log -- . ':!dir'" to
tell us "I am interested in everything but 'dir' directory".
* nd/negative-pathspec:
pathspec.c: support adding prefix magic to a pathspec with mnemonic magic
Support pathspec magic :(exclude) and its short form :!
glossary-content.txt: rephrase magic signature part
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
Back in 233c3e6 (parse_pathspec: preserve prefix length via
PATHSPEC_PREFIX_ORIGIN - 2013-07-14), parse_pathspec() is taught to
save prefix length as a dynamic magic. This is needed when the
pathspec is passed to another process and and prefix lenght would be
lost.
Back then we support two cases. If the pathspec is normal, e.g. "abc",
we simply add the prefix to become ":(prefix:2)abc". If the pathspec
contains long magic, e.g. ":(foo,bar)abc" then we turn it to
":(foo,bar,prefix:2)abc". We do not support prefixing on short form,
because the only supported mnemonic '/' disappears after the the
preprocessing steps.
With the introduction of exclude magic with mnemonic '!', we need to
add support for the short form case so that ':!abc' becomes
':(exclude,prefix:2)abc'. Without this, it will break
cd Documentation
git add -p -- . ':!technical'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mi/typofixes:
contrib: typofixes
Documentation/technical/http-protocol.txt: typofixes
typofixes: fix misspelt comments
|
|
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normally parse_pathspec() is used on command line arguments where it
can do fancy thing like parsing magic on each argument or adding magic
for all pathspecs based on --*-pathspecs options.
There's another use of parse_pathspec(), where pathspec is needed, but
the input is known to be pure paths. In this case we usually don't
want --*-pathspecs to interfere. And we definitely do not want to
parse magic in these paths, regardless of --literal-pathspecs.
Add new flag PATHSPEC_LITERAL_PATH for this purpose. When it's set,
--*-pathspecs are ignored, no magic is parsed. And if the caller
allows PATHSPEC_LITERAL (i.e. the next calls can take literal magic),
then PATHSPEC_LITERAL will be set.
This fixes cases where git chokes when GIT_*_PATHSPECS are set because
parse_pathspec() indicates it won't take any magic. But
GIT_*_PATHSPECS add them anyway. These are
export GIT_LITERAL_PATHSPECS=1
git blame -- something
git log --follow something
git log --merge
"git ls-files --with-tree=path" (aka parse_pathspec() in
overlay_tree_on_cache()) is safe because the input is empty, and
producing one pathspec due to PATHSPEC_PREFER_CWD does not take any
magic into account.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "struct pathspec" interface in more places, instead of array of
characters, the latter of which cannot express magic pathspecs
(e.g. ":(icase)makefile" that matches both Makefile and makefile).
* nd/magic-pathspec:
add: lift the pathspec magic restriction on "add -p"
pathspec: catch prepending :(prefix) on pathspec with short magic
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
:(prefix) is in the long form. Suppose people pass :!foo with '!'
being the short form of magic 'bar', the code will happily turn it to
:(prefix..)!foo, which makes '!' part of the path and no longer a magic.
The correct form must be ':(prefix..,bar)foo', but as so far we
haven't had any magic in short form yet (*), the code to convert from
short form to long one will be inactive anyway. Let's postpone it
until a real short form magic appears.
(*) The short form magic '/' is a special case and won't be caught by
this die(), which is correct. When '/' magic is detected, prefixlen is
set back to 0 and the whole "if (prefixlen..)" block is skipped.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
:(glob)path differs from plain pathspec that it uses wildmatch with
WM_PATHNAME while the other uses fnmatch without FNM_PATHNAME. The
difference lies in how '*' (and '**') is processed.
With the introduction of :(glob) and :(literal) and their global
options --[no]glob-pathspecs, the user can:
- make everything literal by default via --noglob-pathspecs
--literal-pathspecs cannot be used for this purpose as it
disables _all_ pathspec magic.
- individually turn on globbing with :(glob)
- make everything globbing by default via --glob-pathspecs
- individually turn off globbing with :(literal)
The implication behind this is, there is no way to gain the default
matching behavior (i.e. fnmatch without FNM_PATHNAME). You either get
new globbing or literal. The old fnmatch behavior is considered
deprecated and discouraged to use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--literal-pathspecs and its equivalent environment variable are
probably used for scripting. In that setting, pathspec magic may be
unwanted. Disabling globbing in individual pathspec can be done via
:(literal) magic.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prefix length is passed from one command to another via the new
magic 'prefix'. The magic is for parse_pathspec's internal use only,
not visible to parse_pathspec's callers.
Prefix length is not preserved across commands when --literal-pathspecs
is specified (no magic is allowed, including 'prefix'). That's OK
because we know all paths are literal. No magic, no special treatment
regarding prefix. (This may be no longer true if we make :(glob)
default)
Other options to preserve the prefix include saving it to env variable
or quoting. Env var way (at least _one_ env var) is not suitable
because the prefix is not the same for all pathspecs. Pathspecs
starting with "../" will eat into the prefix part.
We could also preserve 'prefix' across commands by quoting the prefix
part, then dequoting on receiving. But it may not be 100% accurate, we
may dequote longer than the original prefix part, for example. That
may be good or not, but it's not the purpose.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepending prefix to pathspec is a trick to workaround the fact that
commands can be executed in a subdirectory, but all git commands run
at worktree's root. The prefix part should always be treated as
literal string. Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch is essentially no-op. It helps catching new use of this
field though. This field is introduced as an intermediate step for the
pathspec conversion and will be removed eventually. At this stage no
more access sites should be introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
match_pathspec_depth was created to replace match_pathspec (see
61cf282 (pathspec: add match_pathspec_depth() - 2010-12-15). It took
more than two years, but the replacement finally happens :-)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at there, move free_pathspec() to pathspec.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes 'original' suitable for passing to an external command
because all pathspec magic is left in place, provided that the
external command understands pathspec. The prefixing is needed because
we usually launch a subcommand at worktree's top directory and the
subcommand can no longer calculate the prefix itself.
This slightly affects the original purpose of 'original'
(i.e. reporting). We should report without prefixing. So only turn
this flag on when you know you are about to pass the result straight
away to an external command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
PATHSPEC_SYMLINK_LEADING_PATH and _STRIP_SUBMODULE_SLASH_EXPENSIVE are
respectively the alternate implementation of
pathspec.c:die_if_path_beyond_symlink() and
pathspec.c:check_path_for_gitlink(). They are intended to replace
those functions when builtin/add.c and builtin/check-ignore.c are
converted to use parse_pathspec.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This flag is equivalent to builtin/ls-files.c:strip_trailing_slashes()
and is intended to replace that function when ls-files is converted to
use parse_pathspec.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
