| Age | Commit message (Collapse) | Author |
|---|
|
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to checking if the provided port is numeric, also check
that the string isn't empty and that the port number is within the
valid range. Incidentally, this silences a compiler warning about
ignoring strtol's return value.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current behavior of git-daemon is to simply close the connection on
any error condition. This leaves the client without any information as
to the cause of the failed fetch/push/etc.
This patch allows get_remote_heads to accept a line prefixed with "ERR"
that it can display to the user in an informative fashion. Once clients
can understand this ERR line, git-daemon can be made to properly report
"repository not found", "permission denied", or other errors.
Example
S: ERR No matching repository.
C: fatal: remote error: No matching repository.
Signed-off-by: Tom Preston-Werner <tom@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With all calls to alloc_ref() gone, we can remove it and then we're free
to give alloc_ref_from_str() the shorter name. It's a much nicer
interface, as the callers always need to have a name string when they
allocate a ref anyway and don't need to calculate and pass its length+1
any more.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" enhancement allows the receiving end to report not only its own
refs but refs in repositories it borrows from via the alternate object
store mechanism. By telling the sender that objects reachable from these
extra refs are already complete in the receiving end, the number of
objects that need to be transfered can be cut down.
These entries are sent over the wire with string ".have", instead of the
actual names of the refs. This string was chosen so that they are ignored
by older programs at the sending end. If we sent some random but valid
looking refnames for these entries, "matching refs" rule (triggered when
running "git push" without explicit refspecs, where the sender learns what
refs the receiver has, and updates only the ones with the names of the
refs the sender also has) and "delete missing" rule (triggered when "git
push --mirror" is used, where the sender tells the receiver to delete the
refs it itself does not have) would try to update/delete them, which is
not what we want.
This prepares the send-pack (and "push" that runs native protocol) to
accept extended existing ref information and make use of it. The ".have"
entries are excluded from ref matching rules, and are exempt from deletion
rule while pushing with --mirror option, but are still used for pack
generation purposes by providing more "bottom" range commits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a mechanical conversion of all '*.c' files with:
s/((?:die|error|warning)\("git)-(\S+:)/$1 $2/;
The result was manually inspected and no false positive was found.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If on Windows a path is specified as C:/path, then this is also a valid
SSH URL. To disambiguate between the two interpretations we take an URL
that looks like a path with a drive letter as a local URL.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change removes all obvious useless if-before-free tests.
E.g., it replaces code like this:
if (some_expression)
free (some_expression);
with the now-equivalent:
free (some_expression);
It is equivalent not just because POSIX has required free(NULL)
to work for a long time, but simply because it has worked for
so long that no reasonable porting target fails the test.
Here's some evidence from nearly 1.5 years ago:
http://www.winehq.org/pipermail/wine-patches/2006-October/031544.html
FYI, the change below was prepared by running the following:
git ls-files -z | xargs -0 \
perl -0x3b -pi -e \
's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*NULL)?\s*\)\s+(free\s*\(\s*\1\s*\))/$2/s'
Note however, that it doesn't handle brace-enclosed blocks like
"if (x) { free (x); }". But that's ok, since there were none like
that in git sources.
Beware: if you do use the above snippet, note that it can
produce syntactically invalid C code. That happens when the
affected "if"-statement has a matching "else".
E.g., it would transform this
if (x)
free (x);
else
foo ();
into this:
free (x);
else
foo ();
There were none of those here, either.
If you're interested in automating detection of the useless
tests, you might like the useless-if-before-free script in gnulib:
[it *does* detect brace-enclosed free statements, and has a --name=S
option to make it detect free-like functions with different names]
http://git.sv.gnu.org/gitweb/?p=gnulib.git;a=blob;f=build-aux/useless-if-before-free
Addendum:
Remove one more (in imap-send.c), spotted by Jean-Luc Herren <jlh@gmx.ch>.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'db/no-separate-ls-remote-connection' (early part):
Fix "git clone" for git:// protocol
Reduce the number of connects when fetching
|
|
core.gitproxy configuration expects a string value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In ba227857(Reduce the number of connects when fetching), we checked
the return value of git_connect() to see if the connection was
successful.
However, for the git:// protocol, there is no need to have another
process, so the return value was NULL.
Now, it makes sense to assume the rule that git_connect() will return
NULL if it fails (at the moment, it die()s if it fails), so return
a dummy child process.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The child process handling is delegated to start_command() and
finish_command().
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
|
|
Currently alloc_ref() expects the length of the refname plus 1
as its parameter, prepares that much space and returns a "ref"
structure for the caller to fill the refname. One caller in
transport.c::get_refs_from_bundle() however allocated one byte
less.
It may be a good idea to change the calling convention to give
alloc_ref() the length of the refname, but that clean-up can be
done in a separate patch. This patch only fixes the bug and
makes all callers consistent.
There was also one overallocation in connect.c, which would not
hurt but was wasteful. This patch fixes it as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sq_quote_buf is made public, and works on a strbuf.
* sq_quote_argv also works on a strbuf.
* make sq_quote_argv take a "maxlen" argument to check the buffer won't grow
too big.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow port specification in ssh:// URLs in the
usual notation:
ssh://[user@]host.domain[:<port>]/<path>
This allows git to be used over ssh-tunneling
networks.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We might make it something like: "if you use an url, we don't default to
local", so the difference would be that
git clone file:///directory/to/repo
would work the way it does now, but
git clone /directory/to/repo
would default to "-l" behaviour. That kind of would make sense (and should
be easy to implement.
This adds support for "file://" URL to underlying connect
codepath to make it happen.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of open-coding allocation wherever it happens, have a function.
Also, add a function to free a list of refs, which we currently never
actually do.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
|
|
Randal L. Schwartz noticed compilation problems on SunOS, which made
me look at the code again. The thing is, h_errno is not used by
connect(2), it is only for functions from netdb.h, like gethostbyname.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* db/remote:
Move refspec pattern matching to match_refs().
Update local tracking refs when pushing
Add handlers for fetch-side configuration of remotes.
Move refspec parser from connect.c and cache.h to remote.{c,h}
Move remote parsing into a library file out of builtin-push.
|
|
Also, the patch makes the error messages more verbose. Helps when
diagnosing connect problems on weird systems.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
At least in Linux glibc, "getaddrinfo()" has a very irritating feature (or
bug, who knows..).
Namely if you pass it in an empty string for the service name, it will
happily and quietly consider it identical to a NULL port pointer, and
return port number zero and no errors. Which obviously will not work.
Maybe that's what it's really expected to do, although the man-page for
getaddrinfo() certainly implies that it's a bug.
So when somebody passes me a "please pull" request pointing to something
like the following
git://git.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
(note the extraneous colon at the end of the host name), git would happily
try to connect to port 0, which would generally just cause the remote to
not even answer, and the "connect()" will take a long time to time out.
So to work around the glibc feature/bug, just notice this empty port case
automatically. Also, add the port information to the error information
when it fails to look up (maybe it's the host-name that fails, maybe it's
the port-name - we should print out both).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Earlier, git_connect() returned the same fd twice or two
separate fds, depending on the way the connection was made (when
we are talking to the other end over a single socket, we used
the same fd twice, and when our end is connected to a pipepair
we used two).
This forced callers who do close() and dup() to really care
which was which, and most of the existing callers got this
wrong, although without much visible ill effect. Many were
closing the same fd twice when we are talking over a single
socket, and one was leaking a fd.
This fixes it to uniformly use two separate fds, so if somebody
wants to close only reader side can just do close() on it
without worrying about it accidentally also closing the writer
side or vice versa.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes the refname matching logic used to decide which ref
is updated with git-send-pack. We used to error out when
pushing 'master' when the other end has both 'master' branch and
a tracking branch 'remotes/$name/master' but with this, 'master'
matches only 'refs/heads/master' when both and no other 'master'
exist.
Pushing 'foo' when both heads/foo and tags/foo exist at the
remote end is still considered an error and you would need to
disambiguate between them by being more explicit.
When neither heads/foo nor tags/foo exists at the remote,
pushing 'foo' when there is only remotes/origin/foo is not
ambiguous, while it still is ambiguous when there are more than
one such weaker match (remotes/origin/foo and remotes/alt/foo,
for example).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git_connect() can return 0 if we use git protocol for example.
Users of this function don't know and don't care if a process
had been created or not, and to avoid them to check it before
calling finish_connect() this patch allows finish_connect() to
take a null pid. And in that case return 0.
[jc: updated function signature of git_connect() with a comment on
its return value. ]
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use "add_to_string" instead of "sq_quote" and "snprintf", so
that there is no memory allocation and no memory leak.
Also check if the command is too long to fit into the buffer
and die if this is the case, instead of truncating it to the
buffer size.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When build a pack for a push we query the remote copy for existant
heads. These are used to prune unnecessary objects from the pack.
As we receive the remote references in get_remote_heads() we validate
the reference names via check_ref() which includes a length check;
rejecting those >45 characters in size.
This is a miss converted change, it was originally designed to reject
messages which were less than 45 characters in length (a 40 character
sha1 and refs/) to prevent comparing unitialised memory. check_ref()
now gets the raw length so check for at least 5 characters.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
All but one callers have ignore the return value from this
function, but the only caller, builtin-tar-tree.c::remote_tar(),
assumed it returns non-zero on failure and zero on success. The
implementation however was returning either the waited pid
(which must be the same as its input) or -1 (an error).
Fix this thinko, while getting rid of an assignment of return
value from waitpid() into a variable of type int.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes git-peek-remote able to basically do everything that
git-ls-remote does (but obviously just for the native protocol, so no
http[s]: or rsync: support).
The default behaviour is the same, but you can now give a mixture of
"--refs", "--tags" and "--heads" flags, where "--refs" forces
git-peek-remote to only show real refs (ie none of the fakey tag lookups,
but also not the special pseudo-refs like HEAD and MERGE_HEAD).
The "--tags" and "--heads" flags respectively limit the output to just
regular tags and heads, of course.
You can still also ask to limit them by name too.
You can combine the flags, so
git peek-remote --refs --tags .
will show all local _true_ tags, without the generated tag lookups
(compare the output without the "--refs" flag).
And "--tags --heads" will show both tags and heads, but will avoid (for
example) any special refs outside of the standard locations.
I'm also planning on adding a "--ignore-local" flag that allows us to ask
it to ignore any refs that we already have in the local tree, but that's
an independent thing.
All this is obviously gearing up to making "git fetch" cheaper.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
errno was used after it could've been modified by a subsequent library call.
Spotted by Morten Welinder.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently the compilation fails in connect.c and merge-index.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
