diff options
| -rw-r--r-- | Documentation/git-check-attr.txt | 5 | ||||
| -rw-r--r-- | Documentation/git-check-ignore.txt | 20 | ||||
| -rw-r--r-- | Documentation/git.txt | 5 | ||||
| -rw-r--r-- | builtin/check-ignore.c | 92 | ||||
| -rwxr-xr-x | t/t0008-ignores.sh | 162 |
5 files changed, 188 insertions, 96 deletions
diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt index 5abdbaa..a7be80d 100644 --- a/Documentation/git-check-attr.txt +++ b/Documentation/git-check-attr.txt @@ -56,6 +56,11 @@ being queried and <info> can be either: 'set';; when the attribute is defined as true. <value>;; when a value has been assigned to the attribute. +Buffering happens as documented under the `GIT_FLUSH` option in +linkgit:git[1]. The caller is responsible for avoiding deadlocks +caused by overfilling an input buffer or reading from an empty output +buffer. + EXAMPLES -------- diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index 854e4d0..8e1f7ab 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -39,6 +39,12 @@ OPTIONS below). If `--stdin` is also given, input paths are separated with a NUL character instead of a linefeed character. +-n, --non-matching:: + Show given paths which don't match any pattern. This only + makes sense when `--verbose` is enabled, otherwise it would + not be possible to distinguish between paths which match a + pattern and those which don't. + OUTPUT ------ @@ -65,6 +71,20 @@ are also used instead of colons and hard tabs: <source> <NULL> <linenum> <NULL> <pattern> <NULL> <pathname> <NULL> +If `-n` or `--non-matching` are specified, non-matching pathnames will +also be output, in which case all fields in each output record except +for <pathname> will be empty. This can be useful when running +non-interactively, so that files can be incrementally streamed to +STDIN of a long-running check-ignore process, and for each of these +files, STDOUT will indicate whether that file matched a pattern or +not. (Without this option, it would be impossible to tell whether the +absence of output for a given file meant that it didn't match any +pattern, or that the output hadn't been generated yet.) + +Buffering happens as documented under the `GIT_FLUSH` option in +linkgit:git[1]. The caller is responsible for avoiding deadlocks +caused by overfilling an input buffer or reading from an empty output +buffer. EXIT STATUS ----------- diff --git a/Documentation/git.txt b/Documentation/git.txt index 9e302b0..65de534 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -811,8 +811,9 @@ for further details. 'GIT_FLUSH':: If this environment variable is set to "1", then commands such as 'git blame' (in incremental mode), 'git rev-list', 'git log', - and 'git whatchanged' will force a flush of the output stream - after each commit-oriented record have been flushed. If this + 'git check-attr', 'git check-ignore', and 'git whatchanged' will + force a flush of the output stream after each record have been + flushed. If this variable is set to "0", the output of these commands will be done using completely buffered I/O. If this environment variable is not set, Git will choose buffered or record-oriented flushing diff --git a/builtin/check-ignore.c b/builtin/check-ignore.c index 854a88a..4a8fc70 100644 --- a/builtin/check-ignore.c +++ b/builtin/check-ignore.c @@ -5,7 +5,7 @@ #include "pathspec.h" #include "parse-options.h" -static int quiet, verbose, stdin_paths; +static int quiet, verbose, stdin_paths, show_non_matching; static const char * const check_ignore_usage[] = { "git check-ignore [options] pathname...", "git check-ignore [options] --stdin < <list-of-paths>", @@ -22,21 +22,28 @@ static const struct option check_ignore_options[] = { N_("read file names from stdin")), OPT_BOOLEAN('z', NULL, &null_term_line, N_("input paths are terminated by a null character")), + OPT_BOOLEAN('n', "non-matching", &show_non_matching, + N_("show non-matching input paths")), OPT_END() }; static void output_exclude(const char *path, struct exclude *exclude) { - char *bang = exclude->flags & EXC_FLAG_NEGATIVE ? "!" : ""; - char *slash = exclude->flags & EXC_FLAG_MUSTBEDIR ? "/" : ""; + char *bang = (exclude && exclude->flags & EXC_FLAG_NEGATIVE) ? "!" : ""; + char *slash = (exclude && exclude->flags & EXC_FLAG_MUSTBEDIR) ? "/" : ""; if (!null_term_line) { if (!verbose) { write_name_quoted(path, stdout, '\n'); } else { - quote_c_style(exclude->el->src, NULL, stdout, 0); - printf(":%d:%s%s%s\t", - exclude->srcpos, - bang, exclude->pattern, slash); + if (exclude) { + quote_c_style(exclude->el->src, NULL, stdout, 0); + printf(":%d:%s%s%s\t", + exclude->srcpos, + bang, exclude->pattern, slash); + } + else { + printf("::\t"); + } quote_c_style(path, NULL, stdout, 0); fputc('\n', stdout); } @@ -44,30 +51,26 @@ static void output_exclude(const char *path, struct exclude *exclude) if (!verbose) { printf("%s%c", path, '\0'); } else { - printf("%s%c%d%c%s%s%s%c%s%c", - exclude->el->src, '\0', - exclude->srcpos, '\0', - bang, exclude->pattern, slash, '\0', - path, '\0'); + if (exclude) + printf("%s%c%d%c%s%s%s%c%s%c", + exclude->el->src, '\0', + exclude->srcpos, '\0', + bang, exclude->pattern, slash, '\0', + path, '\0'); + else + printf("%c%c%c%s%c", '\0', '\0', '\0', path, '\0'); } } } -static int check_ignore(const char *prefix, const char **pathspec) +static int check_ignore(struct dir_struct *dir, + const char *prefix, const char **pathspec) { - struct dir_struct dir; const char *path, *full_path; char *seen; int num_ignored = 0, dtype = DT_UNKNOWN, i; struct exclude *exclude; - /* read_cache() is only necessary so we can watch out for submodules. */ - if (read_cache() < 0) - die(_("index file corrupt")); - - memset(&dir, 0, sizeof(dir)); - setup_standard_excludes(&dir); - if (!pathspec || !*pathspec) { if (!quiet) fprintf(stderr, "no pathspec given.\n"); @@ -86,28 +89,26 @@ static int check_ignore(const char *prefix, const char **pathspec) ? strlen(prefix) : 0, path); full_path = check_path_for_gitlink(full_path); die_if_path_beyond_symlink(full_path, prefix); + exclude = NULL; if (!seen[i]) { - exclude = last_exclude_matching(&dir, full_path, &dtype); - if (exclude) { - if (!quiet) - output_exclude(path, exclude); - num_ignored++; - } + exclude = last_exclude_matching(dir, full_path, &dtype); } + if (!quiet && (exclude || show_non_matching)) + output_exclude(path, exclude); + if (exclude) + num_ignored++; } free(seen); - clear_directory(&dir); return num_ignored; } -static int check_ignore_stdin_paths(const char *prefix) +static int check_ignore_stdin_paths(struct dir_struct *dir, const char *prefix) { struct strbuf buf, nbuf; - char **pathspec = NULL; - size_t nr = 0, alloc = 0; + char *pathspec[2] = { NULL, NULL }; int line_termination = null_term_line ? 0 : '\n'; - int num_ignored; + int num_ignored = 0; strbuf_init(&buf, 0); strbuf_init(&nbuf, 0); @@ -118,23 +119,19 @@ static int check_ignore_stdin_paths(const char *prefix) die("line is badly quoted"); strbuf_swap(&buf, &nbuf); } - ALLOC_GROW(pathspec, nr + 1, alloc); - pathspec[nr] = xcalloc(strlen(buf.buf) + 1, sizeof(*buf.buf)); - strcpy(pathspec[nr++], buf.buf); + pathspec[0] = buf.buf; + num_ignored += check_ignore(dir, prefix, (const char **)pathspec); + maybe_flush_or_die(stdout, "check-ignore to stdout"); } - ALLOC_GROW(pathspec, nr + 1, alloc); - pathspec[nr] = NULL; - num_ignored = check_ignore(prefix, (const char **)pathspec); - maybe_flush_or_die(stdout, "attribute to stdout"); strbuf_release(&buf); strbuf_release(&nbuf); - free(pathspec); return num_ignored; } int cmd_check_ignore(int argc, const char **argv, const char *prefix) { int num_ignored; + struct dir_struct dir; git_config(git_default_config, NULL); @@ -156,13 +153,24 @@ int cmd_check_ignore(int argc, const char **argv, const char *prefix) if (verbose) die(_("cannot have both --quiet and --verbose")); } + if (show_non_matching && !verbose) + die(_("--non-matching is only valid with --verbose")); + + /* read_cache() is only necessary so we can watch out for submodules. */ + if (read_cache() < 0) + die(_("index file corrupt")); + + memset(&dir, 0, sizeof(dir)); + setup_standard_excludes(&dir); if (stdin_paths) { - num_ignored = check_ignore_stdin_paths(prefix); + num_ignored = check_ignore_stdin_paths(&dir, prefix); } else { - num_ignored = check_ignore(prefix, argv); + num_ignored = check_ignore(&dir, prefix, argv); maybe_flush_or_die(stdout, "ignore to stdout"); } + clear_directory(&dir); + return !num_ignored; } diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 9c1bde1..a56db80 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -66,16 +66,23 @@ test_check_ignore () { init_vars && rm -f "$HOME/stdout" "$HOME/stderr" "$HOME/cmd" && - echo git $global_args check-ignore $quiet_opt $verbose_opt $args \ + echo git $global_args check-ignore $quiet_opt $verbose_opt $non_matching_opt $args \ >"$HOME/cmd" && + echo "$expect_code" >"$HOME/expected-exit-code" && test_expect_code "$expect_code" \ - git $global_args check-ignore $quiet_opt $verbose_opt $args \ + git $global_args check-ignore $quiet_opt $verbose_opt $non_matching_opt $args \ >"$HOME/stdout" 2>"$HOME/stderr" && test_cmp "$HOME/expected-stdout" "$HOME/stdout" && stderr_empty_on_success "$expect_code" } -# Runs the same code with 3 different levels of output verbosity, +# Runs the same code with 4 different levels of output verbosity: +# +# 1. with -q / --quiet +# 2. with default verbosity +# 3. with -v / --verbose +# 4. with -v / --verbose, *and* -n / --non-matching +# # expecting success each time. Takes advantage of the fact that # check-ignore --verbose output is the same as normal output except # for the extra first column. @@ -83,7 +90,9 @@ test_check_ignore () { # Arguments: # - (optional) prereqs for this test, e.g. 'SYMLINKS' # - test name -# - output to expect from -v / --verbose mode +# - output to expect from the fourth verbosity mode (the output +# from the other verbosity modes is automatically inferred +# from this value) # - code to run (should invoke test_check_ignore) test_expect_success_multi () { prereq= @@ -92,8 +101,9 @@ test_expect_success_multi () { prereq=$1 shift fi - testname="$1" expect_verbose="$2" code="$3" + testname="$1" expect_all="$2" code="$3" + expect_verbose=$( echo "$expect_all" | grep -v '^:: ' ) expect=$( echo "$expect_verbose" | sed -e 's/.* //' ) test_expect_success $prereq "$testname" ' @@ -101,23 +111,40 @@ test_expect_success_multi () { eval "$code" ' - for quiet_opt in '-q' '--quiet' - do - test_expect_success $prereq "$testname${quiet_opt:+ with $quiet_opt}" " + # --quiet is only valid when a single pattern is passed + if test $( echo "$expect_all" | wc -l ) = 1 + then + for quiet_opt in '-q' '--quiet' + do + test_expect_success $prereq "$testname${quiet_opt:+ with $quiet_opt}" " expect '' && $code " - done - quiet_opt= + done + quiet_opt= + fi for verbose_opt in '-v' '--verbose' do - test_expect_success $prereq "$testname${verbose_opt:+ with $verbose_opt}" " - expect '$expect_verbose' && - $code - " + for non_matching_opt in '' ' -n' ' --non-matching' + do + if test -n "$non_matching_opt" + then + my_expect="$expect_all" + else + my_expect="$expect_verbose" + fi + + test_code=" + expect '$my_expect' && + $code + " + opts="$verbose_opt$non_matching_opt" + test_expect_success $prereq "$testname${opts:+ with $opts}" "$test_code" + done done verbose_opt= + non_matching_opt= } test_expect_success 'setup' ' @@ -178,7 +205,7 @@ test_expect_success 'setup' ' # # test invalid inputs -test_expect_success_multi '. corner-case' '' ' +test_expect_success_multi '. corner-case' ':: .' ' test_check_ignore . 1 ' @@ -189,11 +216,7 @@ test_expect_success_multi 'empty command line' '' ' test_expect_success_multi '--stdin with empty STDIN' '' ' test_check_ignore "--stdin" 1 </dev/null && - if test -n "$quiet_opt"; then - test_stderr "" - else - test_stderr "no pathspec given." - fi + test_stderr "" ' test_expect_success '-q with multiple args' ' @@ -276,27 +299,39 @@ do where="in subdir $subdir" fi - test_expect_success_multi "non-existent file $where not ignored" '' " - test_check_ignore '${subdir}non-existent' 1 - " + test_expect_success_multi "non-existent file $where not ignored" \ + ":: ${subdir}non-existent" \ + "test_check_ignore '${subdir}non-existent' 1" test_expect_success_multi "non-existent file $where ignored" \ - ".gitignore:1:one ${subdir}one" " - test_check_ignore '${subdir}one' - " + ".gitignore:1:one ${subdir}one" \ + "test_check_ignore '${subdir}one'" - test_expect_success_multi "existing untracked file $where not ignored" '' " - test_check_ignore '${subdir}not-ignored' 1 - " + test_expect_success_multi "existing untracked file $where not ignored" \ + ":: ${subdir}not-ignored" \ + "test_check_ignore '${subdir}not-ignored' 1" - test_expect_success_multi "existing tracked file $where not ignored" '' " - test_check_ignore '${subdir}ignored-but-in-index' 1 - " + test_expect_success_multi "existing tracked file $where not ignored" \ + ":: ${subdir}ignored-but-in-index" \ + "test_check_ignore '${subdir}ignored-but-in-index' 1" test_expect_success_multi "existing untracked file $where ignored" \ - ".gitignore:2:ignored-* ${subdir}ignored-and-untracked" " - test_check_ignore '${subdir}ignored-and-untracked' - " + ".gitignore:2:ignored-* ${subdir}ignored-and-untracked" \ + "test_check_ignore '${subdir}ignored-and-untracked'" + + test_expect_success_multi "mix of file types $where" \ +":: ${subdir}non-existent +.gitignore:1:one ${subdir}one +:: ${subdir}not-ignored +:: ${subdir}ignored-but-in-index +.gitignore:2:ignored-* ${subdir}ignored-and-untracked" \ + "test_check_ignore ' + ${subdir}non-existent + ${subdir}one + ${subdir}not-ignored + ${subdir}ignored-but-in-index + ${subdir}ignored-and-untracked' + " done # Having established the above, from now on we mostly test against @@ -391,7 +426,7 @@ test_expect_success 'cd to ignored sub-directory with -v' ' # # test handling of symlinks -test_expect_success_multi SYMLINKS 'symlink' '' ' +test_expect_success_multi SYMLINKS 'symlink' ':: a/symlink' ' test_check_ignore "a/symlink" 1 ' @@ -574,37 +609,34 @@ cat <<-\EOF >stdin globaltwo b/globaltwo ../b/globaltwo + c/not-ignored EOF -cat <<-\EOF >expected-default - ../one - one - b/on - b/one - b/one one - b/one two - "b/one\"three" - b/two - b/twooo - ../globaltwo - globaltwo - b/globaltwo - ../b/globaltwo -EOF -cat <<-EOF >expected-verbose +# N.B. we deliberately end STDIN with a non-matching pattern in order +# to test that the exit code indicates that one or more of the +# provided paths is ignored - in other words, that it represents an +# aggregation of all the results, not just the final result. + +cat <<-EOF >expected-all .gitignore:1:one ../one + :: ../not-ignored .gitignore:1:one one + :: not-ignored a/b/.gitignore:8:!on* b/on a/b/.gitignore:8:!on* b/one a/b/.gitignore:8:!on* b/one one a/b/.gitignore:8:!on* b/one two a/b/.gitignore:8:!on* "b/one\"three" a/b/.gitignore:9:!two b/two + :: b/not-ignored a/.gitignore:1:two* b/twooo $global_excludes:2:!globaltwo ../globaltwo $global_excludes:2:!globaltwo globaltwo $global_excludes:2:!globaltwo b/globaltwo $global_excludes:2:!globaltwo ../b/globaltwo + :: c/not-ignored EOF +grep -v '^:: ' expected-all >expected-verbose +sed -e 's/.* //' expected-verbose >expected-default sed -e 's/^"//' -e 's/\\//' -e 's/"$//' stdin | \ tr "\n" "\0" >stdin0 @@ -629,6 +661,14 @@ test_expect_success '--stdin from subdirectory with -v' ' ) ' +test_expect_success '--stdin from subdirectory with -v -n' ' + expect_from_stdin <expected-all && + ( + cd a && + test_check_ignore "--stdin -v -n" <../stdin + ) +' + for opts in '--stdin -z' '-z --stdin' do test_expect_success "$opts from subdirectory" ' @@ -648,5 +688,23 @@ do ' done +test_expect_success PIPE 'streaming support for --stdin' ' + mkfifo in out && + (git check-ignore -n -v --stdin <in >out &) && + + # We cannot just "echo >in" because check-ignore would get EOF + # after echo exited; instead we open the descriptor in our + # shell, and then echo to the fd. We make sure to close it at + # the end, so that the subprocess does get EOF and dies + # properly. + exec 9>in && + test_when_finished "exec 9>&-" && + echo >&9 one && + read response <out && + echo "$response" | grep "^\.gitignore:1:one one" && + echo >&9 two && + read response <out && + echo "$response" | grep "^:: two" +' test_done |