git-config(1) ============= NAME ---- git-config - Get and set repository or global options SYNOPSIS -------- [verse] 'git config' [] [type] [--show-origin] [-z|--null] name [value [value_regex]] 'git config' [] [type] --add name value 'git config' [] [type] --replace-all name value [value_regex] 'git config' [] [type] [--show-origin] [-z|--null] --get name [value_regex] 'git config' [] [type] [--show-origin] [-z|--null] --get-all name [value_regex] 'git config' [] [type] [--show-origin] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] 'git config' [] [type] [-z|--null] --get-urlmatch name URL 'git config' [] --unset name [value_regex] 'git config' [] --unset-all name [value_regex] 'git config' [] --rename-section old_name new_name 'git config' [] --remove-section name 'git config' [] [--show-origin] [-z|--null] [--name-only] -l | --list 'git config' [] --get-color name [default] 'git config' [] --get-colorbool name [stdout-is-tty] 'git config' [] -e | --edit DESCRIPTION ----------- You can query/set/replace/unset options with this command. The name is actually the section and the key separated by a dot, and the value will be escaped. Multiple lines can be added to an option by using the `--add` option. If you want to update or unset an option which can occur on multiple lines, a POSIX regexp `value_regex` needs to be given. Only the existing values that match the regexp are updated or unset. If you want to handle the lines that do *not* match the regex, just prepend a single exclamation mark in front (see also <>). The type specifier can be either `--int` or `--bool`, to make 'git config' ensure that the variable(s) are of the given type and convert the value to the canonical form (simple decimal number for int, a "true" or "false" string for bool), or `--path`, which does some path expansion (see `--path` below). If no type specifier is passed, no checks or transformations are performed on the value. When reading, the values are read from the system, global and repository local configuration files by default, and options `--system`, `--global`, `--local` and `--file ` can be used to tell the command to read from only that location (see <>). When writing, the new value is written to the repository local configuration file by default, and options `--system`, `--global`, `--file ` can be used to tell the command to write to that location (you can say `--local` but that is the default). This command will fail with non-zero status upon error. Some exit codes are: - The section or key is invalid (ret=1), - no section or name was provided (ret=2), - the config file is invalid (ret=3), - the config file cannot be written (ret=4), - you try to unset an option which does not exist (ret=5), - you try to unset/set an option for which multiple lines match (ret=5), or - you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. OPTIONS ------- --replace-all:: Default behavior is to replace at most one line. This replaces all lines matching the key (and optionally the value_regex). --add:: Adds a new line to the option without altering any existing values. This is the same as providing '^$' as the value_regex in `--replace-all`. --get:: Get the value for a given key (optionally filtered by a regex matching the value). Returns error code 1 if the key was not found and the last value if multiple key values were found. --get-all:: Like get, but returns all values for a multi-valued key. --get-regexp:: Like --get-all, but interprets the name as a regular expression and writes out the key names. Regular expression matching is currently case-sensitive and done against a canonicalized version of the key in which section and variable names are lowercased, but subsection names are not. --get-urlmatch name URL:: When given a two-part name section.key, the value for section..key whose part matches the best to the given URL is returned (if no such key exists, the value for section.key is used as a fallback). When given just the section as name, do so for all the keys in the section and list them. Returns error code 1 if no value is found. --global:: For writing options: write to global `~/.gitconfig` file rather than the repository `.git/config`, write to `$XDG_CONFIG_HOME/git/config` file if this file exists and the `~/.gitconfig` file doesn't. + For reading options: read only from global `~/.gitconfig` and from `$XDG_CONFIG_HOME/git/config` rather than from all available files. + See also <>. --system:: For writing options: write to system-wide `$(prefix)/etc/gitconfig` rather than the repository `.git/config`. + For reading options: read only from system-wide `$(prefix)/etc/gitconfig` rather than from all available files. + See also <>. --local:: For writing options: write to the repository `.git/config` file. This is the default behavior. + For reading options: read only from the repository `.git/config` rather than from all available files. + See also <>. -f config-file:: --file config-file:: Use the given config file instead of the one specified by GIT_CONFIG. --blob blob:: Similar to `--file` but use the given blob instead of a file. E.g. you can use 'master:.gitmodules' to read values from the file '.gitmodules' in the master branch. See "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7] for a more complete list of ways to spell blob names. --remove-section:: Remove the given section from the configuration file. --rename-section:: Rename the given section to a new name. --unset:: Remove the line matching the key from config file. --unset-all:: Remove all lines matching the key from config file. -l:: --list:: List all variables set in config file, along with their values. --bool:: 'git config' will ensure that the output is "true" or "false" --int:: 'git config' will ensure that the output is a simple decimal number. An optional value suffix of 'k', 'm', or 'g' in the config file will cause the value to be multiplied by 1024, 1048576, or 1073741824 prior to output. --bool-or-int:: 'git config' will ensure that the output matches the format of either --bool or --int, as described above. --path:: 'git-config' will expand leading '{tilde}' to the value of '$HOME', and '{tilde}user' to the home directory for the specified user. This option has no effect when setting the value (but you can use 'git config bla {tilde}/' from the command line to let your shell do the expansion). -z:: --null:: For all options that output values and/or keys, always end values with the null character (instead of a newline). Use newline instead as a delimiter between key and value. This allows for secure parsing of the output without getting confused e.g. by values that contain line breaks. --name-only:: Output only the names of config variables for `--list` or `--get-regexp`. --show-origin:: Augment the output of all queried config options with the origin type (file, standard input, blob, command line) and the actual origin (config file path, ref, or blob id if applicable). --get-colorbool name [stdout-is-tty]:: Find the color setting for `name` (e.g. `color.diff`) and output "true" or "false". `stdout-is-tty` should be either "true" or "false", and is taken into account when configuration says "auto". If `stdout-is-tty` is missing, then checks the standard output of the command itself, and exits with status 0 if color is to be used, or exits with status 1 otherwise. When the color setting for `name` is undefined, the command uses `color.ui` as fallback. --get-color name [default]:: Find the color configured for `name` (e.g. `color.diff.new`) and output it as the ANSI color escape sequence to the standard output. The optional `default` parameter is used instead, if there is no color configured for `name`. -e:: --edit:: Opens an editor to modify the specified config file; either `--system`, `--global`, or repository (default). --[no-]includes:: Respect `include.*` directives in config files when looking up values. Defaults to `off` when a specific file is given (e.g., using `--file`, `--global`, etc) and `on` when searching all config files. [[FILES]] FILES ----- If not set explicitly with `--file`, there are four files where 'git config' will search for configuration options: $(prefix)/etc/gitconfig:: System-wide configuration file. $XDG_CONFIG_HOME/git/config:: Second user-specific configuration file. If $XDG_CONFIG_HOME is not set or empty, `$HOME/.config/git/config` will be used. Any single-valued variable set in this file will be overwritten by whatever is in `~/.gitconfig`. It is a good idea not to create this file if you sometimes use older versions of Git, as support for this file was added fairly recently. ~/.gitconfig:: User-specific configuration file. Also called "global" configuration file. $GIT_DIR/config:: Repository specific configuration file. If no further options are given, all reading options will read all of these files that are available. If the global or the system-wide configuration file are not available they will be ignored. If the repository configuration file is not available or readable, 'git config' will exit with a non-zero error code. However, in neither case will an error message be issued. The files are read in the order given above, with last value found taking precedence over values read earlier. When multiple values are taken then all values of a key from all files will be used. You may override individual configuration parameters when running any git command by using the `-c` option. See linkgit:git[1] for details. All writing options will per default write to the repository specific configuration file. Note that this also affects options like `--replace-all` and `--unset`. *'git config' will only ever change one file at a time*. You can override these rules either by command-line options or by environment variables. The `--global` and the `--system` options will limit the file used to the global or system-wide file respectively. The `GIT_CONFIG` environment variable has a similar effect, but you can specify any filename you want. ENVIRONMENT ----------- GIT_CONFIG:: Take the configuration from the given file instead of .git/config. Using the "--global" option forces this to ~/.gitconfig. Using the "--system" option forces this to $(prefix)/etc/gitconfig. GIT_CONFIG_NOSYSTEM:: Whether to skip reading settings from the system-wide $(prefix)/etc/gitconfig file. See linkgit:git[1] for details. See also <>. [[EXAMPLES]] EXAMPLES -------- Given a .git/config like this: # # This is the config file, and # a '#' or ';' character indicates # a comment # ; core variables [core] ; Don't trust file modes filemode = false ; Our diff algorithm [diff] external = /usr/local/bin/diff-wrapper renames = true ; Proxy settings [core] gitproxy=proxy-command for kernel.org gitproxy=default-proxy ; for all the rest ; HTTP [http] sslVerify [http "https://weak.example.com"] sslVerify = false cookieFile = /tmp/cookie.txt you can set the filemode to true with ------------ % git config core.filemode true ------------ The hypothetical proxy command entries actually have a postfix to discern what URL they apply to. Here is how to change the entry for kernel.org to "ssh". ------------ % git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$' ------------ This makes sure that only the key/value pair for kernel.org is replaced. To delete the entry for renames, do ------------ % git config --unset diff.renames ------------ If you want to delete an entry for a multivar (like core.gitproxy above), you have to provide a regex matching the value of exactly one line. To query the value for a given key, do ------------ % git config --get core.filemode ------------ or ------------ % git config core.filemode ------------ or, to query a multivar: ------------ % git config --get core.gitproxy "for kernel.org$" ------------ If you want to know all the values for a multivar, do: ------------ % git config --get-all core.gitproxy ------------ If you like to live dangerously, you can replace *all* core.gitproxy by a new one with ------------ % git config --replace-all core.gitproxy ssh ------------ However, if you really only want to replace the line for the default proxy, i.e. the one without a "for ..." postfix, do something like this: ------------ % git config core.gitproxy ssh '! for ' ------------ To actually match only values with an exclamation mark, you have to ------------ % git config section.key value '[!]' ------------ To add a new proxy, without altering any of the existing ones, use ------------ % git config --add core.gitproxy '"proxy-command" for example.com' ------------ An example to use customized color from the configuration in your script: ------------ #!/bin/sh WS=$(git config --get-color color.diff.whitespace "blue reverse") RESET=$(git config --get-color "" "reset") echo "${WS}your whitespace color or blue reverse${RESET}" ------------ For URLs in `https://weak.example.com`, `http.sslVerify` is set to false, while it is set to `true` for all others: ------------ % git config --bool --get-urlmatch http.sslverify https://good.example.com true % git config --bool --get-urlmatch http.sslverify https://weak.example.com false % git config --get-urlmatch http https://weak.example.com http.cookieFile /tmp/cookie.txt http.sslverify false ------------ include::config.txt[] GIT --- Part of the linkgit:git[1] suite