From 9470605a1b03dac8fc4f801132e36964b4fbb8c3 Mon Sep 17 00:00:00 2001 From: Joakim Petersen Date: Tue, 7 Jun 2022 13:50:24 +0200 Subject: git-prompt: make colourization consistent The short upstream state indicator inherits the colour of the last short state indicator before it (if there is one), and the sparsity state indicator inherits this colour as well. This behaviour was introduced by 0ec7c23cdc6 (git-prompt: make upstream state indicator location consistent, 2022-02-27), while before this change the aforementioned indicators were white/the default text colour. Some examples to illustrate this behaviour (assuming all indicators are enabled and colourization is on): * If there is something in the stash, both the '$' and the short upstream state indicator following it will be blue. * If the local tree has new, untracked files and there is nothing in the stash, both the '%' and the short upstream state indicator will be red. * If all local changes are added to the index and the stash is empty, both the '+' and the short upstream state indicator following it will be green. * If the local tree is clean and there is nothing in the stash, the short upstream state indicator will be white/${default text colour}. This appears to be an unintended side-effect of the change, and makes little sense semantically (e.g. why is it bad to be in sync with upstream when you have uncommitted local changes?). The cause of the change in colourization is that previously, the short upstream state indicator appeared immediately after the rebase/revert/bisect/merge state indicator (note the position of $p in $gitstring): local f="$h$w$i$s$u" local gitstring="$c$b${f:+$z$f}${sparse}$r$p" Said indicator is prepended with the clear colour code, and the short upstream state indicator is thus also uncoloured. Now, the short upstream state indicator follows the sequence of colourized indicators, without any clearing of colour (again note the position of $p, now in $f): local f="$h$w$i$s$u$p" local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}" If the user is in a sparse checkout, the sparsity state indicator follows a similar pattern to the short upstream state indicator. However, clearing colour of the colourized indicators changes how the sparsity state indicator is colourized, as it currently inherits (and before the change referenced also inherited) the colour of the last short state indicator before it. Reading the commit message of the change that introduced the sparsity state indicator, afda36dbf3b (git-prompt: include sparsity state as well, 2020-06-21), it appears this colourization also was unintended, so clearing the colour for said indicator further increases consistency. Make the colourization of these state indicators consistent by making all colourized indicators clear their own colour. Make colouring of $c dependent on it not being empty, as it is no longer being used to colour the branch name. Move clearing of $b's prefix to before colourization so it gets cleared properly when colour codes are inserted into it. These changes make changing the layout of the prompt less prone to unintended colour changes in the future. Change coloured Bash prompt tests to reflect the colourization changes: * Move the colour codes to wrap the expected content of the expanded $__git_ps1_branch_name in all tests. * Insert a clear-colour code after the symbol for the first indicator in "prompt - bash color pc mode - dirty status indicator - dirty index and worktree", to reflect that all indicators should clear their own colour. Signed-off-by: Joakim Petersen Signed-off-by: Junio C Hamano diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index 87b2b91..cb01c2f 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -245,7 +245,8 @@ __git_ps1_show_upstream () # Helper function that is meant to be called from __git_ps1. It # injects color codes into the appropriate gitstring variables used -# to build a gitstring. +# to build a gitstring. Colored variables are responsible for clearing +# their own color. __git_ps1_colorize_gitstring () { if [[ -n ${ZSH_VERSION-} ]]; then @@ -271,22 +272,23 @@ __git_ps1_colorize_gitstring () else branch_color="$bad_color" fi - c="$branch_color$c" + if [ -n "$c" ]; then + c="$branch_color$c$c_clear" + fi + b="$branch_color$b$c_clear" - z="$c_clear$z" - if [ "$w" = "*" ]; then - w="$bad_color$w" + if [ -n "$w" ]; then + w="$bad_color$w$c_clear" fi if [ -n "$i" ]; then - i="$ok_color$i" + i="$ok_color$i$c_clear" fi if [ -n "$s" ]; then - s="$flags_color$s" + s="$flags_color$s$c_clear" fi if [ -n "$u" ]; then - u="$bad_color$u" + u="$bad_color$u$c_clear" fi - r="$c_clear$r" } # Helper function to read the first line of a file into a variable. @@ -554,6 +556,7 @@ __git_ps1 () fi fi + b=${b##refs/heads/} local z="${GIT_PS1_STATESEPARATOR-" "}" # NO color option unless in PROMPT_COMMAND mode or it's Zsh @@ -563,7 +566,6 @@ __git_ps1 () fi fi - b=${b##refs/heads/} if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then __git_ps1_branch_name=$b b="\${__git_ps1_branch_name}" diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index bbd513b..abd82ee 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -541,7 +541,7 @@ test_expect_success 'prompt - pc mode' ' ' test_expect_success 'prompt - bash color pc mode - branch name' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_green}main${c_clear}" >expected && ( GIT_PS1_SHOWCOLORHINTS=y && __git_ps1 "BEFORE:" ":AFTER" >"$actual" && @@ -551,7 +551,7 @@ test_expect_success 'prompt - bash color pc mode - branch name' ' ' test_expect_success 'prompt - bash color pc mode - detached head' ' - printf "BEFORE: (${c_red}\${__git_ps1_branch_name}${c_clear}):AFTER\\n(%s...)" $(git log -1 --format="%h" b1^) >expected && + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_red}(%s...)"${c_clear} $(git log -1 --format="%h" b1^) >expected && git checkout b1^ && test_when_finished "git checkout main" && ( @@ -563,7 +563,7 @@ test_expect_success 'prompt - bash color pc mode - detached head' ' ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty worktree' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}*${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && ( @@ -576,7 +576,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}+${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_green}+${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && git add -u && @@ -590,7 +590,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index and worktree' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_green}+${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}*${c_clear}${c_green}+${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && echo "dirty index" >file && test_when_finished "git reset --hard" && git add -u && @@ -605,7 +605,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - before root commit' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}#${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_green}#${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && ( GIT_PS1_SHOWDIRTYSTATE=y && GIT_PS1_SHOWCOLORHINTS=y && @@ -617,7 +617,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - befo ' test_expect_success 'prompt - bash color pc mode - inside .git directory' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nGIT_DIR!" >expected && + printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_green}GIT_DIR!${c_clear}" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && ( @@ -631,7 +631,7 @@ test_expect_success 'prompt - bash color pc mode - inside .git directory' ' ' test_expect_success 'prompt - bash color pc mode - stash status indicator' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_lblue}\$${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_lblue}\$${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && echo 2 >file && git stash && test_when_finished "git stash drop" && @@ -645,7 +645,7 @@ test_expect_success 'prompt - bash color pc mode - stash status indicator' ' ' test_expect_success 'prompt - bash color pc mode - untracked files status indicator' ' - printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}%%${c_clear}):AFTER\\nmain" >expected && + printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}%%${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && ( GIT_PS1_SHOWUNTRACKEDFILES=y && GIT_PS1_SHOWCOLORHINTS=y && -- cgit v0.10.2-6-g49f6 From 0e5d9ef395467619b621540a7fdefbfc8062f2ac Mon Sep 17 00:00:00 2001 From: Joakim Petersen Date: Fri, 10 Jun 2022 02:47:37 +0200 Subject: git-prompt: fix expansion of branch colour codes Because of the wrapping of the branch name variable $b, the colour codes in the variable don't get applied, but are instead printed directly in the output. Move the wrapping of $b to before colour codes are inserted to correct this. Revert move of branch name colour codes in tests, as the branch name is now coloured after the wrapping instead of before. Signed-off-by: Joakim Petersen Signed-off-by: Junio C Hamano diff --git a/contrib/completion/git-prompt.sh b/contrib/completion/git-prompt.sh index cb01c2f..1435548 100644 --- a/contrib/completion/git-prompt.sh +++ b/contrib/completion/git-prompt.sh @@ -556,9 +556,14 @@ __git_ps1 () fi fi - b=${b##refs/heads/} local z="${GIT_PS1_STATESEPARATOR-" "}" + b=${b##refs/heads/} + if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then + __git_ps1_branch_name=$b + b="\${__git_ps1_branch_name}" + fi + # NO color option unless in PROMPT_COMMAND mode or it's Zsh if [ -n "${GIT_PS1_SHOWCOLORHINTS-}" ]; then if [ $pcmode = yes ] || [ -n "${ZSH_VERSION-}" ]; then @@ -566,11 +571,6 @@ __git_ps1 () fi fi - if [ $pcmode = yes ] && [ $ps1_expanded = yes ]; then - __git_ps1_branch_name=$b - b="\${__git_ps1_branch_name}" - fi - local f="$h$w$i$s$u$p" local gitstring="$c$b${f:+$z$f}${sparse}$r${upstream}" diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index abd82ee..6a30f57 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -541,7 +541,7 @@ test_expect_success 'prompt - pc mode' ' ' test_expect_success 'prompt - bash color pc mode - branch name' ' - printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nmain" >expected && ( GIT_PS1_SHOWCOLORHINTS=y && __git_ps1 "BEFORE:" ":AFTER" >"$actual" && @@ -551,7 +551,7 @@ test_expect_success 'prompt - bash color pc mode - branch name' ' ' test_expect_success 'prompt - bash color pc mode - detached head' ' - printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_red}(%s...)"${c_clear} $(git log -1 --format="%h" b1^) >expected && + printf "BEFORE: (${c_red}\${__git_ps1_branch_name}${c_clear}):AFTER\\n(%s...)" $(git log -1 --format="%h" b1^) >expected && git checkout b1^ && test_when_finished "git checkout main" && ( @@ -563,7 +563,7 @@ test_expect_success 'prompt - bash color pc mode - detached head' ' ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty worktree' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}*${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_clear}):AFTER\\nmain" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && ( @@ -576,7 +576,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_green}+${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}+${c_clear}):AFTER\\nmain" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && git add -u && @@ -590,7 +590,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirty index and worktree' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}*${c_clear}${c_green}+${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}*${c_clear}${c_green}+${c_clear}):AFTER\\nmain" >expected && echo "dirty index" >file && test_when_finished "git reset --hard" && git add -u && @@ -605,7 +605,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - dirt ' test_expect_success 'prompt - bash color pc mode - dirty status indicator - before root commit' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_green}#${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_green}#${c_clear}):AFTER\\nmain" >expected && ( GIT_PS1_SHOWDIRTYSTATE=y && GIT_PS1_SHOWCOLORHINTS=y && @@ -617,7 +617,7 @@ test_expect_success 'prompt - bash color pc mode - dirty status indicator - befo ' test_expect_success 'prompt - bash color pc mode - inside .git directory' ' - printf "BEFORE: (\${__git_ps1_branch_name}):AFTER\\n${c_green}GIT_DIR!${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear}):AFTER\\nGIT_DIR!" >expected && echo "dirty" >file && test_when_finished "git reset --hard" && ( @@ -631,7 +631,7 @@ test_expect_success 'prompt - bash color pc mode - inside .git directory' ' ' test_expect_success 'prompt - bash color pc mode - stash status indicator' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_lblue}\$${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_lblue}\$${c_clear}):AFTER\\nmain" >expected && echo 2 >file && git stash && test_when_finished "git stash drop" && @@ -645,7 +645,7 @@ test_expect_success 'prompt - bash color pc mode - stash status indicator' ' ' test_expect_success 'prompt - bash color pc mode - untracked files status indicator' ' - printf "BEFORE: (\${__git_ps1_branch_name} ${c_red}%%${c_clear}):AFTER\\n${c_green}main${c_clear}" >expected && + printf "BEFORE: (${c_green}\${__git_ps1_branch_name}${c_clear} ${c_red}%%${c_clear}):AFTER\\nmain" >expected && ( GIT_PS1_SHOWUNTRACKEDFILES=y && GIT_PS1_SHOWCOLORHINTS=y && -- cgit v0.10.2-6-g49f6 From 325240dfd76bc6a47e5a89beccf27b236b70e2ac Mon Sep 17 00:00:00 2001 From: Alexander Shopov Date: Mon, 20 Jun 2022 18:44:34 +0200 Subject: name-rev: prefix annotate-stdin with '--' in message This is an option rather than command. Make the message convey this similar to the other messages in the file. Signed-off-by: Alexander Shopov Signed-off-by: Junio C Hamano diff --git a/builtin/name-rev.c b/builtin/name-rev.c index 02ea9d1..580b1eb 100644 --- a/builtin/name-rev.c +++ b/builtin/name-rev.c @@ -577,7 +577,7 @@ int cmd_name_rev(int argc, const char **argv, const char *prefix) N_("ignore refs matching ")), OPT_GROUP(""), OPT_BOOL(0, "all", &all, N_("list all commits reachable from all refs")), - OPT_BOOL(0, "stdin", &transform_stdin, N_("deprecated: use annotate-stdin instead")), + OPT_BOOL(0, "stdin", &transform_stdin, N_("deprecated: use --annotate-stdin instead")), OPT_BOOL(0, "annotate-stdin", &annotate_stdin, N_("annotate text from stdin")), OPT_BOOL(0, "undefined", &allow_undefined, N_("allow to print `undefined` names (default)")), OPT_BOOL(0, "always", &always, -- cgit v0.10.2-6-g49f6