From addf88e455f85bc6cfe0284b70aaad10b6d3486e Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sun, 9 Jul 2006 03:44:30 -0400 Subject: Assorted typo fixes Signed-off-by: Junio C Hamano diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 8601949..90722c2 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -49,7 +49,7 @@ People on the git mailing list need to be able to read and comment on the changes you are submitting. It is important for a developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of -your code. For this reason, all patches should be submited +your code. For this reason, all patches should be submitted "inline". WARNING: Be wary of your MUAs word-wrap corrupting your patch. Do not cut-n-paste your patch; you can lose tabs that way if you are not careful. diff --git a/Documentation/cvs-migration.txt b/Documentation/cvs-migration.txt index 1fbca83..d2b0bd3 100644 --- a/Documentation/cvs-migration.txt +++ b/Documentation/cvs-migration.txt @@ -93,7 +93,7 @@ machine where the repository is hosted. If you don't want to give them a full shell on the machine, there is a restricted shell which only allows users to do git pushes and pulls; see gitlink:git-shell[1]. -Put all the committers should in the same group, and make the repository +Put all the committers in the same group, and make the repository writable by that group: ------------------------------------------------ diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt index 481b8b3..7248b35 100644 --- a/Documentation/git-diff-files.txt +++ b/Documentation/git-diff-files.txt @@ -37,7 +37,7 @@ omit diff output for unmerged entries and just show "Unmerged". commit with these flags. -q:: - Remain silent even on nonexisting files + Remain silent even on nonexistent files Output format ------------- diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt index 8a150d8..0a4fc14 100644 --- a/Documentation/git-init-db.txt +++ b/Documentation/git-init-db.txt @@ -25,7 +25,7 @@ DESCRIPTION ----------- This command creates an empty git repository - basically a `.git` directory with subdirectories for `objects`, `refs/heads`, `refs/tags`, and -templated files. +template files. An initial `HEAD` file that references the HEAD of the master branch is also created. diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 209e36b..5a17801 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -25,7 +25,7 @@ OPTIONS -b:: If any file doesn't begin with a From line, assume it is a - single mail message instead of signalling error. + single mail message instead of signaling error. -d:: Instead of the default 4 digits with leading zeros, diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 4ce799b..bebf30a 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -83,7 +83,7 @@ your local modifications interfere with the merge, again, it stops before touching anything. So in the above two "failed merge" case, you do not have to -worry about lossage of data --- you simply were not ready to do +worry about loss of data --- you simply were not ready to do a merge, so no merge happened at all. You may want to finish whatever you were in the middle of doing, and retry the same pull after you are done and ready. diff --git a/Documentation/git-p4import.txt b/Documentation/git-p4import.txt index 0858e5e..ee9e8fa 100644 --- a/Documentation/git-p4import.txt +++ b/Documentation/git-p4import.txt @@ -128,7 +128,7 @@ Tags A git tag of the form p4/xx is created for every change imported from the Perforce repository where xx is the Perforce changeset number. Therefore after the import you can use git to access any commit by its -Perforce number, eg. git show p4/327. +Perforce number, e.g. git show p4/327. The tag associated with the HEAD commit is also how `git-p4import` determines if there are new changes to incrementally import from the @@ -143,7 +143,7 @@ may delete the tags. Notes ----- -You can interrupt the import (eg. ctrl-c) at any time and restart it +You can interrupt the import (e.g. ctrl-c) at any time and restart it without worry. Author information is automatically determined by querying the diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt index 8fb0659..7d54b17 100644 --- a/Documentation/git-pack-redundant.txt +++ b/Documentation/git-pack-redundant.txt @@ -29,7 +29,7 @@ OPTIONS --all:: - Processes all packs. Any filenames on the commandline are ignored. + Processes all packs. Any filenames on the command line are ignored. --alt-odb:: Don't require objects present in packs from alternate object diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index d5b5ca1..56afd64 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -67,7 +67,7 @@ Some short-cut notations are also supported. -f, \--force:: Usually, the command refuses to update a remote ref that is - not a descendent of the local ref used to overwrite it. + not a descendant of the local ref used to overwrite it. This flag disables the check. This can cause the remote repository to lose commits; use it with care. diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt index 803c0d5..b03d66f 100644 --- a/Documentation/git-repo-config.txt +++ b/Documentation/git-repo-config.txt @@ -119,8 +119,8 @@ you can set the filemode to true with % git repo-config core.filemode true ------------ -The hypothetic proxy command entries actually have a postfix to discern -to what URL they apply. Here is how to change the entry for kernel.org +The hypothetical proxy command entries actually have a postfix to discern +what URL they apply to. Here is how to change the entry for kernel.org to "ssh". ------------ diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt index 6c370e1..e220842 100644 --- a/Documentation/git-rev-list.txt +++ b/Documentation/git-rev-list.txt @@ -64,7 +64,7 @@ OPTIONS --objects-edge:: Similar to `--objects`, but also print the IDs of - excluded commits refixed with a `-` character. This is + excluded commits prefixed with a `-` character. This is used by `git-pack-objects` to build 'thin' pack, which records objects in deltified form based on objects contained in these excluded commits to reduce network diff --git a/Documentation/git-tools.txt b/Documentation/git-tools.txt index d79523f..0914cbb 100644 --- a/Documentation/git-tools.txt +++ b/Documentation/git-tools.txt @@ -42,7 +42,7 @@ History Viewers - *gitk* (shipped with git-core) - gitk is a simple TK GUI for browsing history of GIT repositories easily. + gitk is a simple Tk GUI for browsing history of GIT repositories easily. - *gitview* (contrib/) diff --git a/Documentation/git-upload-tar.txt b/Documentation/git-upload-tar.txt index a1019a0..394af62 100644 --- a/Documentation/git-upload-tar.txt +++ b/Documentation/git-upload-tar.txt @@ -17,7 +17,7 @@ to the other end over the git protocol. This command is usually not invoked directly by the end user. The UI for the protocol is on the 'git-tar-tree' side, and the -program pair is meant to be used to get a tar achive from a +program pair is meant to be used to get a tar archive from a remote repository. diff --git a/Documentation/git.txt b/Documentation/git.txt index 51f20c6..d00cc3e 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -478,7 +478,7 @@ Configuration Mechanism Starting from 0.99.9 (actually mid 0.99.8.GIT), `.git/config` file is used to hold per-repository configuration options. It is a -simple text file modelled after `.ini` format familiar to some +simple text file modeled after `.ini` format familiar to some people. Here is an example: ------------ diff --git a/Documentation/howto/isolate-bugs-with-bisect.txt b/Documentation/howto/isolate-bugs-with-bisect.txt index edbcd4c..926bbdc 100644 --- a/Documentation/howto/isolate-bugs-with-bisect.txt +++ b/Documentation/howto/isolate-bugs-with-bisect.txt @@ -28,7 +28,7 @@ Then do and at this point "git bisect" will churn for a while, and tell you what the mid-point between those two commits are, and check that state out as -the head of the bew "bisect" branch. +the head of the new "bisect" branch. Compile and reboot. diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt index c2d4a91..fcd64e9 100644 --- a/Documentation/howto/rebase-from-internal-branch.txt +++ b/Documentation/howto/rebase-from-internal-branch.txt @@ -124,7 +124,7 @@ up your changes, along with other changes. The two commits #2' and #3' in the above picture record the same changes your e-mail submission for #2 and #3 contained, but -probably with the new sign-off line added by the upsteam +probably with the new sign-off line added by the upstream maintainer and definitely with different committer and ancestry information, they are different objects from #2 and #3 commits. diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt index 9aadd5c..103eb5d 100644 --- a/Documentation/technical/pack-heuristics.txt +++ b/Documentation/technical/pack-heuristics.txt @@ -73,7 +73,7 @@ The traditional insight: yes -And Bable-like confusion flowed. +And Babel-like confusion flowed. oh, hmm, and I'm not sure what this sliding window means either @@ -257,7 +257,7 @@ proclaim it a non-issue. Good style too! (type, basename, size)). Then we walk through this list, and calculate a delta of - each object against the last n (tunable paramater) objects, + each object against the last n (tunable parameter) objects, and pick the smallest of these deltas. Vastly simplified, but the essence is there! @@ -395,7 +395,7 @@ used as setup for a later optimization, which is a real word: do "object name->location in packfile" translation. I'm assuming the real win for delta-ing large->small is - more homogenous statistics for gzip to run over? + more homogeneous statistics for gzip to run over? (You have to put the bytes in one place or another, but putting them in a larger blob wins on compression) @@ -448,7 +448,7 @@ design options, etc. Bugs happen, but they are "simple" bugs. And bugs that actually get some object store detail wrong are almost always - so obious that they never go anywhere. + so obvious that they never go anywhere. Yeah. diff --git a/INSTALL b/INSTALL index f8337e2..7da2c89 100644 --- a/INSTALL +++ b/INSTALL @@ -44,7 +44,7 @@ Issues of note: - "libcurl" and "curl" executable. git-http-fetch and git-fetch use them. If you do not use http - transfer, you are probabaly OK if you do not have + transfer, you are probably OK if you do not have them. - expat library; git-http-push uses it for remote lock @@ -69,7 +69,7 @@ Issues of note: git, and if you only use git to track other peoples work you'll never notice the lack of it. - - "wish", the TCL/Tk windowing shell is used in gitk to show the + - "wish", the Tcl/Tk windowing shell is used in gitk to show the history graphically - "ssh" is used to push and pull over the net diff --git a/Makefile b/Makefile index 588d925..13f7c89 100644 --- a/Makefile +++ b/Makefile @@ -60,7 +60,7 @@ all: # Define NO_ACCURATE_DIFF if your diff program at least sometimes misses # a missing newline at the end of the file. # -# Define NO_PYTHON if you want to loose all benefits of the recursive merge. +# Define NO_PYTHON if you want to lose all benefits of the recursive merge. # # Define COLLISION_CHECK below if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you @@ -469,7 +469,7 @@ ifdef NO_ACCURATE_DIFF ALL_CFLAGS += -DNO_ACCURATE_DIFF endif -# Shell quote (do not use $(call) to accomodate ancient setups); +# Shell quote (do not use $(call) to accommodate ancient setups); SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER)) diff --git a/git-cvsserver.perl b/git-cvsserver.perl index 5ccca4f..c30ef70 100755 --- a/git-cvsserver.perl +++ b/git-cvsserver.perl @@ -779,7 +779,7 @@ sub req_update #$log->debug("update state : " . Dumper($state)); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { $filename = filecleanup($filename); @@ -1031,7 +1031,7 @@ sub req_ci my @committedfiles = (); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { my $committedfile = $filename; @@ -1145,7 +1145,7 @@ sub req_ci $updater->update(); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @committedfiles ) { $filename = filecleanup($filename); @@ -1190,7 +1190,7 @@ sub req_status # if no files were specified, we need to work out what files we should be providing status on ... argsfromdir($updater); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { $filename = filecleanup($filename); @@ -1291,7 +1291,7 @@ sub req_diff # if no files were specified, we need to work out what files we should be providing status on ... argsfromdir($updater); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { $filename = filecleanup($filename); @@ -1433,7 +1433,7 @@ sub req_log # if no files were specified, we need to work out what files we should be providing status on ... argsfromdir($updater); - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { $filename = filecleanup($filename); @@ -1519,7 +1519,7 @@ sub req_annotate chdir $tmpdir; - # foreach file specified on the commandline ... + # foreach file specified on the command line ... foreach my $filename ( @{$state->{args}} ) { $filename = filecleanup($filename); diff --git a/server-info.c b/server-info.c index 0eb5132..fdfe05a 100644 --- a/server-info.c +++ b/server-info.c @@ -94,7 +94,7 @@ static int read_pack_info_file(const char *infofile) fp = fopen(infofile, "r"); if (!fp) - return 1; /* nonexisting is not an error. */ + return 1; /* nonexistent is not an error. */ while (fgets(line, sizeof(line), fp)) { int len = strlen(line); -- cgit v0.10.2-6-g49f6