summaryrefslogtreecommitdiff
path: root/xdiff-interface.c
AgeCommit message (Collapse)Author
2021-04-27hash: provide per-algorithm null OIDsbrian m. carlson
Up until recently, object IDs did not have an algorithm member, only a hash. Consequently, it was possible to share one null (all-zeros) object ID among all hash algorithms. Now that we're going to be handling objects from multiple hash algorithms, it's important to make sure that all object IDs have a correct algorithm field. Introduce a per-algorithm null OID, and add it to struct hash_algo. Introduce a wrapper function as well, and use it everywhere we used to use the null_oid constant. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-29xdiff: avoid computing non-zero offset from NULL pointerJeff King
As with the previous commit, clang-11's UBSan complains about computing offsets from a NULL pointer, causing some tests to fail. In this case, though, we're actually computing a non-zero offset, which is even more dubious. From t7810: xdiff-interface.c:268:14: runtime error: applying non-zero offset 1 to null pointer ... not ok 131 - grep -p with userdiff The problem is our parsing of the funcname config. We count the number of lines in the string, allocate an array, and then loop over our allocated entries, parsing each line and moving our cursor to one past the trailing newline for the next iteration. But the final line will not generally have a trailing newline (since it's a config value), and hence we go to one past NULL. In practice this is OK, since our loop should terminate before we look at the value. But even computing such an invalid pointer technically violates the standard. We can fix it by leaving the pointer at NULL if we're at the end, rather than one-past. And while we're thinking about it, we can also document the variant by asserting that our initial line-count matches the second-pass of parsing. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-29avoid computing zero offsets from NULL pointerJeff King
The Undefined Behavior Sanitizer in clang-11 seems to have learned a new trick: it complains about computing offsets from a NULL pointer, even if that offset is 0. This causes numerous test failures. For example, from t1090: unpack-trees.c:1355:41: runtime error: applying zero offset to null pointer ... not ok 6 - in partial clone, sparse checkout only fetches needed blobs The code in question looks like this: struct cache_entry **cache_end = cache + nr; ... while (cache != cache_end) and we sometimes pass in a NULL and 0 for "cache" and "nr". This is conceptually fine, as "cache_end" would be equal to "cache" in this case, and we wouldn't enter the loop at all. But computing even a zero offset violates the C standard. And given the fact that UBSan is noticing this behavior, this might be a potential problem spot if the compiler starts making unexpected assumptions based on undefined behavior. So let's just avoid it, which is pretty easy. In some cases we can just switch to iterating with a numeric index (as we do in sequencer.c here). In other cases (like the cache_end one) the use of an end pointer is more natural; we can keep that by just explicitly checking for the NULL/0 case when assigning the end pointer. Note that there are two ways you can write this latter case, checking for the pointer: cache_end = cache ? cache + nr : cache; or the size: cache_end = nr ? cache + nr : cache; For the case of a NULL/0 ptr/len combo, they are equivalent. But writing it the second way (as this patch does) has the property that if somebody were to incorrectly pass a NULL pointer with a non-zero length, we'd continue to notice and segfault, rather than silently pretending the length was zero. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-20completion: add more parameter value completionNguyễn Thái Ngọc Duy
This adds value completion for a couple more paramters. To make it easier to maintain these hard coded lists, add a comment at the original list/code to remind people to update git-completion.bash too. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-13Merge branch 'jk/xdiff-interface'Junio C Hamano
The interface into "xdiff" library used to discover the offset and size of a generated patch hunk by first formatting it into the textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers out. A new interface has been introduced to allow callers a more direct access to them. * jk/xdiff-interface: xdiff-interface: drop parse_hunk_header() range-diff: use a hunk callback diff: convert --check to use a hunk callback combine-diff: use an xdiff hunk callback diff: use hunk callback for word-diff diff: discard hunk headers for patch-ids earlier diff: avoid generating unused hunk header lines xdiff-interface: provide a separate consume callback for hunks xdiff: provide a separate emit callback for hunks
2018-11-05xdiff-interface: drop parse_hunk_header()Jeff King
This function was used only for parsing the hunk headers generated by xdiff. Now that we can use hunk callbacks to get that information directly, it has outlived its usefulness. Note to anyone who wants to resurrect it: the "len" parameter was totally unused, meaning that the function could read past the end of the "line" array. In practice this never happened, because we only used it to parse xdiff's generated header lines. But it would be dangerous to use it for other cases without fixing this defect. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-05diff: use hunk callback for word-diffJeff King
Our word-diff does not look at the -/+ lines generated by xdiff at all (because they are not real lines to show the user, but just the tokenized words split into lines). Instead we use the line numbers from the hunk headers to index our own data structure. As a result, our xdi_diff_outf() callback throws away all lines except hunk headers. We can instead use a hunk callback, which has two benefits: 1. We don't have to re-parse the generated hunk header line, but can use the passed parameters directly. 2. By setting our line callback to NULL, we can tell xdiff-interface that it does not even need to bother generating the other lines, saving a small amount of work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-05diff: avoid generating unused hunk header linesJeff King
Some callers of xdi_diff_outf() do not look at the generated hunk header lines at all. By plugging in a no-op hunk callback, this tells xdiff not to even bother formatting them. This patch introduces a stock no-op callback and uses it with a few callers whose line callbacks explicitly ignore hunk headers (because they look only for +/- lines). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02xdiff-interface: provide a separate consume callback for hunksJeff King
The previous commit taught xdiff to optionally provide the hunk header data to a specialized callback. But most users of xdiff actually use our more convenient xdi_diff_outf() helper, which ensures that our callbacks are always fed whole lines. Let's plumb the special hunk-callback through this interface, too. It will follow the same rule as xdiff when the hunk callback is NULL (i.e., continue to pass a stringified hunk header to the line callback). Since we add NULL to each caller, there should be no behavior change yet. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-02xdiff: provide a separate emit callback for hunksJeff King
The xdiff library always emits hunk header lines to our callbacks as formatted strings like "@@ -a,b +c,d @@\n". This is convenient if we're going to output a diff, but less so if we actually need to compute using those numbers, which requires re-parsing the line. In preparation for moving away from this, let's teach xdiff a new callback function which gets the broken-out hunk information. To help callers that don't want to use this new callback, if it's NULL we'll continue to format the hunk header into a string. Note that this function renames the "outf" callback to "out_line", as well. This isn't strictly necessary, but helps in two ways: 1. Now that there are two callbacks, it's nice to use more descriptive names. 2. Many callers did not zero the emit_callback_data struct, and needed to be modified to set ecb.out_hunk to NULL. By changing the name of the existing struct member, that guarantees that any new callers from in-flight topics will break the build and be examined manually. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29convert "oidcmp() == 0" to oideq()Jeff King
Using the more restrictive oideq() should, in the long run, give the compiler more opportunities to optimize these callsites. For now, this conversion should be a complete noop with respect to the generated code. The result is also perhaps a little more readable, as it avoids the "zero is equal" idiom. Since it's so prevalent in C, I think seasoned programmers tend not to even notice it anymore, but it can sometimes make for awkward double negations (e.g., we can drop a few !!oidcmp() instances here). This patch was generated almost entirely by the included coccinelle patch. This mechanical conversion should be completely safe, because we check explicitly for cases where oidcmp() is compared to 0, which is what oideq() is doing under the hood. Note that we don't have to catch "!oidcmp()" separately; coccinelle's standard isomorphisms make sure the two are treated equivalently. I say "almost" because I did hand-edit the coccinelle output to fix up a few style violations (it mostly keeps the original formatting, but sometimes unwraps long lines). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-16object-store: move object access functions to object-store.hStefan Beller
This should make these functions easier to find and cache.h less overwhelming to read. In particular, this moves: - read_object_file - oid_object_info - write_object_file As a result, most of the codebase needs to #include object-store.h. In this patch the #include is only added to files that would fail to compile otherwise. It would be better to #include wherever identifiers from the header are used. That can happen later when we have better tooling for it. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14sha1_file: convert read_sha1_file to struct object_idbrian m. carlson
Convert read_sha1_file to take a pointer to struct object_id and rename it read_object_file. Do the same for read_sha1_file_extended. Convert one use in grep.c to use the new function without any other code change, since the pointer being passed is a void pointer that is already initialized with a pointer to struct object_id. Update the declaration and definitions of the modified functions, and apply the following semantic patch to convert the remaining callers: @@ expression E1, E2, E3; @@ - read_sha1_file(E1.hash, E2, E3) + read_object_file(&E1, E2, E3) @@ expression E1, E2, E3; @@ - read_sha1_file(E1->hash, E2, E3) + read_object_file(E1, E2, E3) @@ expression E1, E2, E3, E4; @@ - read_sha1_file_extended(E1.hash, E2, E3, E4) + read_object_file_extended(&E1, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - read_sha1_file_extended(E1->hash, E2, E3, E4) + read_object_file_extended(E1, E2, E3, E4) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-10-26xdiff-interface: export comparing and hashing stringsStefan Beller
This will turn out to be useful in a later patch. xdl_recmatch is exported in xdiff/xutils.h, to be used by various xdiff/*.c files, but not outside of xdiff/. This one makes it available to the outside, too. While at it, add documentation. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-24Merge branch 'bw/config-h'Junio C Hamano
Fix configuration codepath to pay proper attention to commondir that is used in multi-worktree situation, and isolate config API into its own header file. * bw/config-h: config: don't implicitly use gitdir or commondir config: respect commondir setup: teach discover_git_directory to respect the commondir config: don't include config.h by default config: remove git_config_iter config: create config.h
2017-06-15config: don't include config.h by defaultBrandon Williams
Stop including config.h by default in cache.h. Instead only include config.h in those files which require use of the config system. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-26print errno when reporting a system call errorNguyễn Thái Ngọc Duy
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26Merge branch 'js/regexec-buf'Junio C Hamano
Some codepaths in "git diff" used regexec(3) on a buffer that was mmap(2)ed, which may not have a terminating NUL, leading to a read beyond the end of the mapped region. This was fixed by introducing a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND extension. * js/regexec-buf: regex: use regexec_buf() regex: add regexec_buf() that can work on a non NUL-terminated string regex: -G<pattern> feeds a non NUL-terminated string to regexec() and fails
2016-09-21regex: use regexec_buf()Johannes Schindelin
The new regexec_buf() function operates on buffers with an explicitly specified length, rather than NUL-terminated strings. We need to use this function whenever the buffer we want to pass to regexec(3) may have been mmap(2)ed (and is hence not NUL-terminated). Note: the original motivation for this patch was to fix a bug where `git diff -G <regex>` would crash. This patch converts more callers, though, some of which allocated to construct NUL-terminated strings, or worse, modified buffers to temporarily insert NULs while calling regexec(3). By converting them to use regexec_buf(), the code has become much cleaner. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-07Convert read_mmblob to take struct object_id.brian m. carlson
Since all of its callers have been updated, convert read_mmblob to take a pointer to struct object_id. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-31xdiff: don't trim common tail with -WRené Scharfe
The function trim_common_tail() exits early if context lines are requested. If -U0 and -W are specified together then it can still trim context lines that might belong to a changed function. As a result that function is shown incompletely. Fix that by calling trim_common_tail() only if no function context or fixed context is requested. The parameter ctx is no longer needed now; remove it. While at it fix an outdated comment as well. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-02-22convert trivial cases to ALLOC_ARRAYJeff King
Each of these cases can be converted to use ALLOC_ARRAY or REALLOC_ARRAY, which has two advantages: 1. It automatically checks the array-size multiplication for overflow. 2. It always uses sizeof(*array) for the element-size, so that it can never go out of sync with the declared type of the array. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-09-28xdiff: reject files larger than ~1GBJeff King
The xdiff code is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in our input files. This can cause us to produce incorrect diffs, with no indication that the output is wrong. Or worse, we may even underallocate a buffer whose size is the result of an overflowing addition. We're much better off to tell the user that we cannot diff or merge such a large file. This patch covers both cases, but in slightly different ways: 1. For merging, we notice the large file and cleanly fall back to a binary merge (which is effectively "we cannot merge this"). 2. For diffing, we make the binary/text distinction much earlier, and in many different places. For this case, we'll use the xdi_diff as our choke point, and reject any diff there before it hits the xdiff code. This means in most cases we'll die() immediately after. That's not ideal, but in practice we shouldn't generally hit this code path unless the user is trying to do something tricky. We already consider files larger than core.bigfilethreshold to be binary, so this code would only kick in when that is circumvented (either by bumping that value, or by using a .gitattribute to mark a file as diffable). In other words, we can avoid being "nice" here, because there is already nice code that tries to do the right thing. We are adding the suspenders to the nice code's belt, so notice when it has been worked around (both to protect the user from malicious inputs, and because it is better to die() than generate bogus output). The maximum size was chosen after experimenting with feeding large files to the xdiff code. It's just under a gigabyte, which leaves room for two obvious cases: - a diff3 merge conflict result on files of maximum size X could be 3*X plus the size of the markers, which would still be only about 3G, which fits in a 32-bit int. - some of the diff code allocates arrays of one int per record. Even if each file consists only of blank lines, then a file smaller than 1G will have fewer than 1G records, and therefore the int array will fit in 4G. Since the limit is arbitrary anyway, I chose to go under a gigabyte, to leave a safety margin (e.g., we would not want to overflow by allocating "(records + 1) * sizeof(int)" or similar. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-09xdiff: remove emit_func() and xdi_diff_hunks()René Scharfe
The functions are unused now, remove them. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-15add, merge, diff: do not use strcasecmp to compare config variable namesJonathan Nieder
The config machinery already makes section and variable names lowercase when parsing them, so using strcasecmp for comparison just feels wasteful. No noticeable change intended. Noticed-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-26Merge branch 'rs/maint-diff-fd-leak' into maintJunio C Hamano
* rs/maint-diff-fd-leak: close file on error in read_mmfile()
2010-12-26close file on error in read_mmfile()René Scharfe
Reported in http://qa.debian.org/daca/cppcheck/sid/git_1.7.2.3-2.2.html and in http://thread.gmane.org/gmane.comp.version-control.git/123042. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-10xdiff-interface.c: always trim trailing space from xfuncname matchesBrandon Casey
Generally, trailing space is removed from the string matched by the xfuncname patterns. The exception is when the matched string exceeds the length of the fixed-size buffer that it will be copied in to. But, a string that exceeds the buffer can still contain trailing space in the portion of the string that will be copied into the buffer. So, simplify this code slightly, and just perform the trailing space removal always. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-04Merge branch 'maint-1.7.0' into maintJunio C Hamano
* maint-1.7.0: remove ecb parameter from xdi_diff_outf()
2010-05-04remove ecb parameter from xdi_diff_outf()René Scharfe
xdi_diff_outf() overrides the structure members of its last parameter, ignoring any value that callers pass in. It's no surprise then that all callers pass a pointer to an uninitialized structure. They also don't read it after the call, so the parameter is neither used for input nor for output. Turn it into a local variable of xdi_diff_outf(). Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-17refactor duplicated fill_mm() in checkout and merge-recursiveMichael Lukashov
The following function is duplicated: fill_mm Move it to xdiff-interface.c and rename it 'read_mmblob', as suggested by Junio C Hamano. Also, change parameters order for consistency with read_mmfile(). Signed-off-by: Michael Lukashov <michael.lukashov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-02userdiff: add xdiff_clear_find_func()René Scharfe
xdiff_set_find_func() is used to set user defined regular expressions for finding function signatures. Add xdiff_clear_find_func(), which frees the memory allocated by the former, making the API complete. Also, use the new function in diff.c (the only call site of xdiff_set_find_func()) to clean up after ourselves. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-08Remove unused function scope local variablesBenjamin Kramer
These variables were unused and can be removed safely: builtin-clone.c::cmd_clone(): use_local_hardlinks, use_separate_remote builtin-fetch-pack.c::find_common(): len builtin-remote.c::mv(): symref diff.c::show_stats():show_stats(): total diffcore-break.c::should_break(): base_size fast-import.c::validate_raw_date(): date, sign fsck.c::fsck_tree(): o_sha1, sha1 xdiff-interface.c::parse_num(): read_some Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-26xdiff-interface.c: remove 10 duplicated linesJim Meyering
Remove an accidentally duplicated sequence of 10 lines. This happens to plug a leak, too. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-11-09Merge branch 'rs/blame'Junio C Hamano
* rs/blame: blame: use xdi_diff_hunks(), get rid of struct patch add xdi_diff_hunks() for callers that only need hunk lengths Allow alternate "low-level" emit function from xdl_diff Always initialize xpparam_t to 0 blame: inline get_patch()
2008-10-25add xdi_diff_hunks() for callers that only need hunk lengthsRené Scharfe
Based on a patch by Brian Downing, this uses the xdiff emit_func feature to implement xdi_diff_hunks(). It's a function that calls a callback for each hunk of a diff, passing its lengths. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-17Merge branch 'maint'Junio C Hamano
* maint: t1301-shared-repo.sh: don't let a default ACL interfere with the test git-check-attr(1): add output and example sections xdiff-interface.c: strip newline (and cr) from line before pattern matching t4018-diff-funcname: demonstrate end of line funcname matching flaw t4018-diff-funcname: rework negated last expression test Typo "does not exists" when git remote update remote. remote.c: correct the check for a leading '/' in a remote name Add testcase to ensure merging an early part of a branch is done properly Conflicts: t/t7600-merge.sh
2008-10-16xdiff-interface.c: strip newline (and cr) from line before pattern matchingBrandon Casey
POSIX doth sayeth: "In the regular expression processing described in IEEE Std 1003.1-2001, the <newline> is regarded as an ordinary character and both a period and a non-matching list can match one. ... Those utilities (like grep) that do not allow <newline>s to match are responsible for eliminating any <newline> from strings before matching against the RE." Thus far git has not been removing the trailing newline from strings matched against regular expression patterns. This has the effect that (quoting Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by a newline) will be matched by the pattern '^(FUNCNAME.$)' but not '^(FUNCNAME$)'", and more simply not '^FUNCNAME$'. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-03xdiff-interface.c: strip newline (and cr) from line before pattern matchingBrandon Casey
POSIX doth sayeth: "In the regular expression processing described in IEEE Std 1003.1-2001, the <newline> is regarded as an ordinary character and both a period and a non-matching list can match one. ... Those utilities (like grep) that do not allow <newline>s to match are responsible for eliminating any <newline> from strings before matching against the RE." Thus far git has not been removing the trailing newline from strings matched against regular expression patterns. This has the effect that (quoting Jonathan del Strother) "... a line containing just 'FUNCNAME' (terminated by a newline) will be matched by the pattern '^(FUNCNAME.$)' but not '^(FUNCNAME$)'", and more simply not '^FUNCNAME$'. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-29Merge branch 'bc/master-diff-hunk-header-fix'Shawn O. Pearce
* bc/master-diff-hunk-header-fix: Clarify commit error message for unmerged files Use strchrnul() instead of strchr() plus manual workaround Use remove_path from dir.c instead of own implementation Add remove_path: a function to remove as much as possible of a path git-submodule: Fix "Unable to checkout" for the initial 'update' Clarify how the user can satisfy stash's 'dirty state' check. t4018-diff-funcname: test syntax of builtin xfuncname patterns t4018-diff-funcname: test syntax of builtin xfuncname patterns make "git remote" report multiple URLs diff hunk pattern: fix misconverted "\{" tex macro introducers diff: fix "multiple regexp" semantics to find hunk header comment diff: use extended regexp to find hunk headers diff: use extended regexp to find hunk headers diff.*.xfuncname which uses "extended" regex's for hunk header selection diff.c: associate a flag with each pattern and use it for compiling regex diff.c: return pattern entry pointer rather than just the hunk header pattern Conflicts: builtin-merge-recursive.c t/t7201-co.sh xdiff-interface.h
2008-09-29Merge branch 'jc/better-conflict-resolution'Shawn O. Pearce
* jc/better-conflict-resolution: Fix AsciiDoc errors in merge documentation git-merge documentation: describe how conflict is presented checkout --conflict=<style>: recreate merge in a non-default style checkout -m: recreate merge when checking out of unmerged index git-merge-recursive: learn to honor merge.conflictstyle merge.conflictstyle: choose between "merge" and "diff3 -m" styles rerere: understand "diff3 -m" style conflicts with the original rerere.c: use symbolic constants to keep track of parsing states xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less xmerge.c: minimum readability fixups xdiff-merge: optionally show conflicts in "diff3 -m" style xdl_fill_merge_buffer(): separate out a too deeply nested function checkout --ours/--theirs: allow checking out one side of a conflicting merge checkout -f: allow ignoring unmerged paths when checking out of the index Conflicts: Documentation/git-checkout.txt builtin-checkout.c builtin-merge-recursive.c t/t7201-co.sh
2008-09-20diff: fix "multiple regexp" semantics to find hunk header commentJunio C Hamano
When multiple regular expressions are concatenated with "\n", they were traditionally AND'ed together, and only a line that matches _all_ of them is taken as a match. This however is unwieldy when multiple regexp feature is used to specify alternatives. This fixes the semantics to take the first match. A nagative pattern, if matches, makes the line to fail as before. A match with a positive pattern will be the final match, and what it captures in $1 is used as the hunk header comment. We could write alternatives using "|" in ERE, but the machinery can only use captured $1 as the hunk header comment (or $0 if there is no match in $1), so you cannot write: "junk ( A | B ) | garbage ( C | D )" and expect both "junk" and "garbage" to get stripped with the existing code. With this fix, you can write it as: "junk ( A | B ) \n garbage ( C | D )" and the way capture works would match the user expectation more naturally. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-09-19Merge branch 'bc/maint-diff-hunk-header-fix' into bc/master-diff-hunk-header-fixJunio C Hamano
* bc/maint-diff-hunk-header-fix: diff.*.xfuncname which uses "extended" regex's for hunk header selection diff.c: associate a flag with each pattern and use it for compiling regex diff.c: return pattern entry pointer rather than just the hunk header pattern Cosmetical command name fix Start conforming code to "git subcmd" style part 3 t9700/test.pl: remove File::Temp requirement t9700/test.pl: avoid bareword 'STDERR' in 3-argument open() GIT 1.6.0.2 Fix some manual typos. Use compatibility regex library also on FreeBSD Use compatibility regex library also on AIX Update draft release notes for 1.6.0.2 Use compatibility regex library for OSX/Darwin git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl Git.pm: Use File::Temp->tempfile instead of ->new t7501: always use test_cmp instead of diff Start conforming code to "git subcmd" style part 2 diff: Help "less" hide ^M from the output checkout: do not check out unmerged higher stages randomly Conflicts: Documentation/git.txt Documentation/gitattributes.txt Makefile diff.c t/t7201-co.sh
2008-09-19diff.c: associate a flag with each pattern and use it for compiling regexBrandon Casey
This is in preparation for allowing extended regular expression patterns. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-31merge.conflictstyle: choose between "merge" and "diff3 -m" stylesJunio C Hamano
This teaches "git merge-file" to honor merge.conflictstyle configuration variable, whose value can be "merge" (default) or "diff3". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14xdiff-interface: hide the whole "xdiff_emit_state" business from the callerJunio C Hamano
This further enhances xdi_diff_outf() interface so that it takes two common parameters: the callback function that processes one line at a time, and a pointer to its application specific callback data structure. xdi_diff_outf() creates its own "xdiff_emit_state" structure and stashes these two away inside it, which is used by the lowest level output function in the xdiff_outf() callchain, consume_one(), to call back to the application layer. With this restructuring, we lift the requirement that the caller supplied callback data structure embeds xdiff_emit_state structure as its first member. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14Use strbuf for struct xdiff_emit_state's remainderBrian Downing
Continually xreallocing and freeing the remainder member of struct xdiff_emit_state was a noticeable performance hit. Use a strbuf instead. This yields a decent performance improvement on "git blame" on certain repositories. For example, before this commit: $ time git blame -M -C -C -p --incremental server.c >/dev/null 101.52user 0.17system 1:41.73elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+39561minor)pagefaults 0swaps With this commit: $ time git blame -M -C -C -p --incremental server.c >/dev/null 80.38user 0.30system 1:20.81elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k 0inputs+0outputs (0major+50979minor)pagefaults 0swaps Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-14Make xdi_diff_outf interface for running xdiff_outf diffsBrian Downing
To prepare for the need to initialize and release resources for an xdi_diff with the xdiff_outf output function, make a new function to wrap this usage. Old: ecb.outf = xdiff_outf; ecb.priv = &state; ... xdi_diff(file_p, file_o, &xpp, &xecfg, &ecb); New: xdi_diff_outf(file_p, file_o, &state.xm, &xpp, &xecfg, &ecb); Signed-off-by: Brian Downing <bdowning@lavos.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-14Merge branch 'maint'Junio C Hamano
* maint: merge-file: handle empty files gracefully merge-recursive: handle file mode changes Minor wording changes in the keyboard descriptions in git-add --interactive. git fetch: Take '-n' to mean '--no-tags' quiltimport: fix misquoting of parsed -p<num> parameter git-quiltimport: better parser to grok "enhanced" series files.
2008-03-14merge-file: handle empty files gracefullyJohannes Schindelin
Earlier, it would error out while trying to read and/or writing them. Now, calling merge-file with empty files is neither interesting nor useful, but it is a bug that needed fixing. Noticed by Clemens Buchacher. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>