| Age | Commit message (Collapse) | Author |
|---|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how m_p_d() is used. And it usage is:
- match against an index entry (ce_path_match or match_pathspec_depth
in ls-files)
- match against a dir_entry from read_directory (dir_path_match and
match_pathspec_depth in clean.c, which will be converted later)
- resolve-undo (rerere.c and ls-files.c)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps reduce the number of match_pathspec_depth() call sites and
show how match_pathspec_depth() is used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
"git commit -v" appends the patch to the log message before
editing, and then removes the patch when the editor returned
control. However, the patch was not stripped correctly when the
first modified path was a submodule.
* jl/commit-v-strip-marker:
commit -v: strip diffs and submodule shortlogs from the commit message
|
|
When using the '-v' option of "git commit" the diff added to the commit
message temporarily for editing is stripped off after the user exited the
editor by searching for "\ndiff --git " and truncating the commmit message
there if it is found.
But this approach has two problems:
- when the commit message itself contains a line starting with
"diff --git" it will be truncated there prematurely; and
- when the "diff.submodule" setting is set to "log", the diff may
start with "Submodule <hash1>..<hash2>", which will be left in
the commit message while it shouldn't.
Fix that by introducing a special scissor separator line starting with the
comment character ('#' or the core.commentChar config if set) followed by
two lines describing what it is for. The scissor line - which will not be
translated - is used to reliably detect the start of the diff so it can be
chopped off from the commit message, no matter what the user enters there.
Turn a known test failure fixed by this change into a successful test;
also add one for a diff starting with a submodule log and another one for
proper handling of the comment char.
Reported-by: Ari Pollak <ari@debian.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's not easy for translators to see spaces in these strings have to
align, especially when there are no guarantees that these strings are
grouped together in .po files. Refactor the code and do the alignment
automatically.
Noticed-by: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Especially helpful when cherry-picking multiple commits.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
From the commit log template, remove irrelevant "advice" messages
that are shared with "git status" output.
* mm/commit-template-squelch-advice-messages:
commit: disable status hints when writing to COMMIT_EDITMSG
wt-status: turn advice_status_hints into a field of wt_status
commit: factor status configuration is a helper function
|
|
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
|
|
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
|
|
No behavior change in this patch, but this makes the display of status
hints more flexible as they can be enabled or disabled for individual
calls to commit.c:run_status().
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
List of files in other sections ("Changes to be committed", ...) end with
a blank line. It is not the case with the "Untracked files" and "Ignored
files" sections. The issue become particularly visible after the #-prefix
removal, as the last line (e.g. "nothing added to commit but untracked
files present") seems mixed with the untracked files.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Historically, "git status" needed to prefix each output line with '#' so
that the output could be added as comment to the commit message. This
prefix comment has no real purpose when "git status" is ran from the
command-line, and this may distract users from the real content.
Disable this prefix comment by default, and make it re-activable for
users needing backward compatibility with status.displayCommentPrefix.
Obviously, "git commit" ignores status.displayCommentPrefix and keeps the
comment unconditionnaly when writing to COMMIT_EDITMSG (but not when
writing to stdout for an error message or with --dry-run).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --for-status option was an undocumented option used only by
wt-status.c, which inserted a header and commented out the output. We can
achieve the same result within wt-status.c, without polluting the
submodule command-line options.
This will make it easier to disable the comments from wt-status.c later.
The --for-status is kept so that another topic in flight
(bc/submodule-status-ignored) can continue relying on it, although it is
currently a no-op.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No behavior change, but two slight code reorganization: argv_array_push
doesn't accept NULL strings, and duplicates its argument hence
summary_limit must be written to before being inserted into argv.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to see what the current branch is tracking, one way is using
"git branch -v -v", but branches other than the current are also
reported. Another way is using "git status", such as:
$ git status
# On branch master
# Your branch is ahead of 'origin/master' by 1 commit.
...
But this will not work if there is no change between the current
branch and its upstream. Always report upstream tracking info
even if there is no difference, so that "git status" is consistent
for checking tracking info for current branch. E.g.
$ git status
# On branch feature1
# Your branch is up-to-date with 'github/feature1'.
...
$ git status -bs
## feature1...github/feature1
...
$ git checkout feature1
Already on 'feature1'
Your branch is up-to-date with 'github/feature1'.
...
Also add some test cases in t6040.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command "git branch -vv" will report tracking branches, but invalid
tracking branches are also reported. This is because the function
stat_tracking_info() can not distinguish invalid tracking branch
from other cases which it would not like to report, such as
there is no upstream settings at all, or nothing is changed between
one branch and its upstream.
Junio suggested missing upstream should be reported [1] like:
$ git branch -v -v
master e67ac84 initial
* topic 3fc0f2a [topicbase: gone] topic
$ git status
# On branch topic
# Your branch is based on 'topicbase', but the upstream is gone.
# (use "git branch --unset-upstream" to fixup)
...
$ git status -b -s
## topic...topicbase [gone]
...
In order to do like that, we need to distinguish these three cases
(i.e. no tracking, with configured but no longer valid tracking, and
with tracking) in function stat_tracking_info(). So the refactored
function stat_tracking_info() has three return values: -1 (with "gone"
base), 0 (no base), and 1 (with base).
If the caller does not like to report tracking info when nothing
changed between the branch and its upstream, simply checks if
num_theirs and num_ours are both 0.
[1]: http://thread.gmane.org/gmane.comp.version-control.git/231830/focus=232288
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add "interactive" mode to "git clean".
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
|
|
* nd/const-struct-cache-entry:
Convert "struct cache_entry *" to "const ..." wherever possible
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
|
|
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
|
|
I attempted to make index_state->cache[] a "const struct cache_entry **"
to find out how existing entries in index are modified and where. The
question I have is what do we do if we really need to keep track of on-disk
changes in the index. The result is
- diff-lib.c: setting CE_UPTODATE
- name-hash.c: setting CE_HASHED
- preload-index.c, read-cache.c, unpack-trees.c and
builtin/update-index: obvious
- entry.c: write_entry() may refresh the checked out entry via
fill_stat_cache_info(). This causes "non-const struct cache_entry
*" in builtin/apply.c, builtin/checkout-index.c and
builtin/checkout.c
- builtin/ls-files.c: --with-tree changes stagemask and may set
CE_UPDATE
Of these, write_entry() and its call sites are probably most
interesting because it modifies on-disk info. But this is stat info
and can be retrieved via refresh, at least for porcelain
commands. Other just uses ce_flags for local purposes.
So, keeping track of "dirty" entries is just a matter of setting a
flag in index modification functions exposed by read-cache.c. Except
unpack-trees, the rest of the code base does not do anything funny
behind read-cache's back.
The actual patch is less valueable than the summary above. But if
anyone wants to re-identify the above sites. Applying this patch, then
this:
diff --git a/cache.h b/cache.h
index 430d021..1692891 100644
--- a/cache.h
+++ b/cache.h
@@ -267,7 +267,7 @@ static inline unsigned int canon_mode(unsigned int mode)
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
struct index_state {
- struct cache_entry **cache;
+ const struct cache_entry **cache;
unsigned int version;
unsigned int cache_nr, cache_alloc, cache_changed;
struct string_list *resolve_undo;
will help quickly identify them without bogus warnings.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git am was previously modified to provide --continue for consistency
with rebase, merge etc, and the documentation changed to showing
--continue as the primary form.
Complete the work by replacing remaining uses of --resolved by
--continue, most notably in suggested command reminders.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
quote_path_relative() used to take a counted string as its parameter
(the string to be quoted). With an earlier change, it now uses
relative_path() that does not take a counted string, and we have
been passing only the pointer to the string since then.
Remove the length parameter from quote_path_relative() to show that
this parameter was redundant. All the changed lines show that the
caller passed either -1 (to ask the function run strlen() on the
string), or the length of the string, so the earlier conversion was
safe.
All the callers of quote_path_relative() that used to take counted string
have been audited to make sure that they are passing length of the actual
string (or -1 to ask the callee run strlen())
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The recent addition of status.branch started affecting what is shown
when "git status --porcelain" is run by mistake. Identify the
configuration items that should be ignored under "--porcelain"
option, introduce a "deferred config" mechanism to keep the values
read from the configuration, and decide what value to use only after
we read both from configuration and command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cherry-pick is in progress, 'git status' gives the advice to
run "git commit" to finish the cherry-pick.
However, this won't continue the sequencer, when picking a range of
commits.
Advise users to run "git cherry-pick --continue/--abort"; they work
when picking a single commit as well.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b397ea4 (status: show more info than "currently not on any branch",
2013-03-13) attempted to make the output of 'git status' richer in
the case of a detached HEAD. Before this patch, with a detached
HEAD, we saw:
$ git status
# Not currently on any branch.
But after the patch, we see:
$ git checkout v1.8.2
$ git status
# HEAD detached at v1.8.2.
It works by digging the reflog for the most recent message of the
form "checkout: moving from xxxx to yyyy". It then asserts that
HEAD and "yyyy" are the same, and displays this message. When they
aren't equal, it displays:
$ git status
# HEAD detached from fe11db.
so that the user can see where the HEAD was first detached.
In case of a rebase [-i] operation in progress, this message depends
on the implementation of rebase writing "checkout: " messages to the
reflog, but that is an implementation detail of "rebase". To remove
this dependency so that rebase can be updated to write better reflog
messages, replace this "HEAD detached from" message with:
# rebase in progress; onto $ONTO
Changes to the commit object name in the expected output for some of
the tests shows that what the test expected "status" to show during
"rebase -i" was not consistent with the output during a vanilla
"rebase", which showed on top of what commit the series is being
replayed. Now we consistently expect something meaningful to the
end user.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The struct grab_1st_switch_cbdata has the field "found", which is
set in grab_1st_switch() when a match is found. This information is
redundant and unused by any code. The return value of the function
serves to communicate this information anyway.
Remove the field.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git-ls-files --ignored --directories' hides empty directories even though
--no-empty-directory was not specified.
Treat the DIR_HIDE_EMPTY_DIRECTORIES flag independently from
DIR_SHOW_IGNORED to make all git-ls-files options work as expected.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
|
|
* tb/document-status-u-tradeoff:
i18n: make the translation of -u advice in one go
|
|
The advice (consider use of -u when read_directory takes too long) is
separated into 3 different status_printf_ln() calls, and which brings
trouble for translators.
Since status_vprintf() called by status_printf_ln() can handle eol in
buffer, we could simply join these lines into one paragraph.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the logical equivalent for "git status" of 3ee4452 (bash: teach
__git_ps1 about REVERT_HEAD).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
|
|
Add a bit more information to "git status" during a rebase/bisect
session.
* nd/branch-show-rebase-bisect-state:
status, branch: fix the misleading "bisecting" message
branch: show more information when HEAD is detached
status: show more info than "currently not on any branch"
wt-status: move wt_status_get_state() out to wt_status_print()
wt-status: split wt_status_state parsing function out
wt-status: move strbuf into read_and_strip_branch()
|
|
The current message is "bisecting %s" (or "bisecting branch %s").
"%s" is the current branch when we started bisecting. Clarify that to
avoid confusion with good and bad refs passed to "bisect" command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff.c: diff.renamelimit => diff.renameLimit in message
wt-status: fix possible use of uninitialized variable
fast-import: clarify "inline" logic in file_change_m
run-command: always set failed_errno in start_command
transport: drop "int cmp = cmp" hack
drop some obsolete "x = x" compiler warning hacks
fast-import: use pointer-to-pointer to keep list tail
|
|
In wt_status_print_change_data, we accept a change_type flag
that is meant to be either WT_STATUS_UPDATED or
WT_STATUS_CHANGED. We then switch() on this value to set
the local variable "status" for each case, but do not
provide a fallback "default" label to the switch statement.
As a result, the compiler realizes that "status" might be
unset, and complains with a warning. To silence this
warning, we use the "int status = status" trick. This is
correct with the current code, as all callers provide one of
the two expected change_type flags. However, it's also a
maintenance trap, as there is nothing to prevent future
callers from passing another flag, nor to document this
assumption.
Instead of using the "x = x" hack, let's handle the default
case in the switch() statement with a die("BUG"). That tells
the compiler and any readers of the code exactly what the
function's input assumptions are.
We could also convert the flag to an enum, which would
provide a compile-time check on the function input. However,
since these flags are part of a larger enum, that would make
the code unnecessarily complex (we would have to make a new
enum with just the two flags, and then convert it to the old
enum for passing to sub-functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
|
|
When a remote ref or a tag is checked out, HEAD is automatically
detached. There is no user-friendly way to find out what ref is
checked out in this case. This patch digs in reflog for this
information and shows "HEAD detached from origin/master" or "HEAD
detached at v1.8.0" instead of "currently not on any branch".
When it cannot figure out the original ref, it shows an abbreviated
SHA-1. "Currently not on any branch" would never display (unless
reflog is pruned to near empty that the last checkout entry is lost).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The strbufs are placed outside read_and_strip_branch as a premature
optimization: when it reads "refs/heads/foo" to strbuf and wants to
return just "foo", it could do so without memory movement. In return
the caller must not use the returned pointer after releasing strbufs,
which own the buffers that contain the returned strings. It's a clumsy
design.
By moving strbufs into read_and_strip_branch(), the returned pointer
always points to a malloc'd buffer or NULL. The pointer can be passed
around and freed after use.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
