| Age | Commit message (Collapse) | Author |
|---|
|
Code clean-up to clarify the rule that "git-compat-util.h" must be
the first to be included.
* en/header-cleanup:
diff.h: remove unnecessary include of object.h
Remove unnecessary includes of builtin.h
treewide: replace cache.h with more direct headers, where possible
replace-object.h: move read_replace_refs declaration from cache.h to here
object-store.h: move struct object_info from cache.h
dir.h: refactor to no longer need to include cache.h
object.h: stop depending on cache.h; make cache.h depend on object.h
ident.h: move ident-related declarations out of cache.h
pretty.h: move has_non_ascii() declaration from commit.h
cache.h: remove dependence on hex.h; make other files include it explicitly
hex.h: move some hex-related declarations from cache.h
hash.h: move some oid-related declarations from cache.h
alloc.h: move ALLOC_GROW() functions from cache.h
treewide: remove unnecessary cache.h includes in source files
treewide: remove unnecessary cache.h includes
treewide: remove unnecessary git-compat-util.h includes in headers
treewide: ensure one of the appropriate headers is sourced first
|
|
For sanity, we should probably do one of the following:
(a) make C and header files both depend upon everything they need
(b) consistently exclude git-compat-util.h from headers and require it
be the first include in C files
Currently, we have some of the headers following (a) and others
following (b), which makes things messy. In the past I was pushed
towards (b), as per [1] and [2]. Further, during this series I
discovered that this mixture empirically will mean that we end up with C
files that do not directly include git-compat-util.h, and do include
headers that don't include git-compat-util.h, with the result that we
likely have headers included before an indirect inclusion of
git-compat-util.h. Since git-compat-util.h has tricky platform-specific
stuff that is meant to be included before everything else, this state of
affairs is risky and may lead to things breaking in subtle ways (and
only on some platforms) as per [1] and [2].
Since including git-compat-util.h in existing header files makes it
harder for us to catch C files that are missing that include, let's
switch to (b) to make the enforcement of this rule easier. Remove the
inclusion of git-compat-util.h from header files other than the ones
that have been approved as alternate first includes.
[1] https://lore.kernel.org/git/20180811173406.GA9119@sigill.intra.peff.net/
[2] https://lore.kernel.org/git/20180811174301.GA9287@sigill.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
trace_repo_setup() of trace.c is called with the argument 'prefix' from
only one location, run_builtin of git.c, which sets 'prefix' to the return
value of setup_git_directory() or setup_git_directory_gently() (a wrapper
of the former).
Now that "prefix" is in startup_info there is no need for the parameter
of trace_repo_setup() because setup_git_directory() sets "startup_info->prefix"
to the same value it returns. It would be less confusing to use "prefix"
from startup_info instead of passing it as an argument.
Signed-off-by: Idriss Fekir <mcsm224@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the "else" branches of the HAVE_VARIADIC_MACROS macro, which
have been unconditionally omitted since 765dc168882 (git-compat-util:
always enable variadic macros, 2021-01-28).
Since were always omitted, anyone trying to use a compiler without
variadic macro support to compile a git since version
git v2.31.0 or later would have had a compilation error. 10 months
across a few releases since then should have been enough time for
anyone who cared to run into that and report the issue.
In addition to that, for anyone unsetting HAVE_VARIADIC_MACROS we've
been emitting extremely verbose warnings since at least
ee4512ed481 (trace2: create new combined trace facility,
2019-02-22). That's because there is no such thing as a
"region_enter_printf" or "region_leave_printf" format, so at least
under GCC and Clang everything that includes trace.h (almost every
file) emits a couple of warnings about that.
There's a large benefit to being able to have a hard dependency rely
on variadic macros, the code surrounding usage.c is hard to maintain
if we need to write two implementations of everything, and by relying
on "__FILE__" and "__LINE__" along with "__VA_ARGS__" we can in the
future make error(), die() etc. log where they were called from. We've
also recently merged d67fc4bf0ba (Merge branch 'bc/require-c99',
2021-12-10) which further cements our hard dependency on C99.
So let's delete the fallback code, and update our CodingGuidelines to
note that we depend on this. The added bullet-point starts with
lower-case for consistency with other bullet-points in that section.
The diff in "trace.h" is relatively hard to read, since we need to
retain the existing API docs, which were comments on the code used if
HAVE_VARIADIC_MACROS was not defined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move various *_INIT macros to use designated initializers. This helps
readability. I've only picked those leftover macros that were not
touched by another in-flight series of mine which changed others, but
also how initialization was done.
In the case of SUBMODULE_ALTERNATE_SETUP_INIT I've left an explicit
initialization of "error_mode", even though
SUBMODULE_ALTERNATE_ERROR_IGNORE itself is defined as "0". Let's not
peek under the hood and assume that enum fields we know the value of
will stay at "0".
The change to "TESTSUITE_INIT" in "t/helper/test-run-command.c" was
part of an earlier on-list version[1] of c90be786da9 (test-tool
run-command: fix flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the initialization of "struct strbuf" changed in
cbc0f81d96f (strbuf: use designated initializers in STRBUF_INIT,
2017-07-10) to omit specifying "alloc" and "len", as we do with other
"alloc" and "len" (or "nr") in similar structs.
Let's likewise omit the explicit initialization of all fields in the
"struct ipc_client_connect_option" struct added in
59c7b88198a (simple-ipc: add win32 implementation, 2021-03-15).
Do the same for a few other initializers, e.g. STRVEC_INIT and
CACHE_DEF_INIT.
Finally, start incrementally changing the same pattern in
"t/helper/test-run-command.c". This change was part of an earlier
on-list version[1] of c90be786da9 (test-tool run-command: fix
flip-flop init pattern, 2021-09-11).
1. https://lore.kernel.org/git/patch-1.1-0aa4523ab6e-20210909T130849Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whenever GIT_CURL_VERBOSE is set, teach Git to behave as if
GIT_TRACE_CURL=1 and GIT_TRACE_CURL_NO_DATA=1 is set, instead of setting
CURLOPT_VERBOSE.
This is to prevent inadvertent revelation of sensitive data. In
particular, GIT_CURL_VERBOSE redacts neither the "Authorization" header
nor any cookies specified by GIT_REDACT_COOKIES.
Unifying the tracing mechanism also has the future benefit that any
improvements to the tracing mechanism will benefit both users of
GIT_CURL_VERBOSE and GIT_TRACE_CURL, and we do not need to remember to
implement any improvement twice.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the documentation from Documentation/technical/api-trace.txt
to trace.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Documentation/technical/api-trace.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Finish the job by removing all instances of "extern" for function
declarations in headers using sed.
This was done by running the following on my system with sed 4.2.2:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs sed -i'' -e 's/^\(\s*\)extern \([^(]*([^*]\)/\1\2/'
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Then, leftover instances of extern were found by running
$ git grep -w -C3 extern \*.{c,h}
and manually checking the output. No other instances were found.
Note that the regex used specifically excludes function variables which
_should_ be left as extern.
Not the most elegant way to do it but it gets the job done.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Performance measurements are listed right now as a flat list, which is
fine when we measure big blocks. But when we start adding more and
more measurements, some of them could be just part of a bigger
measurement and a flat list gives a wrong impression that they are
executed at the same level instead of nested.
Add trace_performance_enter() and trace_performance_leave() to allow
indent these nested measurements. For now it does not help much
because the only nested thing is (lazy) name hash initialization
(e.g. called in diff-index from "git status"). This will help more
because I'm going to add some more tracing that's actually nested.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is so that we can print traces based on this key outside trace.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move just enough code from trace.c into trace.h header so all code
necessary to determine that trace is disabled could be inlined to
calling functions. Then perform the check if the trace key is
enabled sooner in call chain.
Signed-off-by: Gennady Kupava <gkupava@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trace key normalization is not used, not strictly necessary,
complicates the code and would negatively affect compilation speed if
moved to header.
New trace_default_key key or existing separate marco could be used
instead of passing NULL as a key.
Signed-off-by: Gennady Kupava <gkupava@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When debugging the pack protocol, it is sometimes useful to
store the verbatim pack that we sent or received on the
wire. Looking at the on-disk result is often not helpful for
a few reasons:
1. If the operation is a clone, we destroy the repo on
failure, leaving nothing on disk.
2. If the pack is small, we unpack it immediately, and the
full pack never hits the disk.
3. If we feed the pack to "index-pack --fix-thin", the
resulting pack has the extra delta bases added to it.
We already have a GIT_TRACE_PACKET mechanism for tracing
packets. Let's extend it with GIT_TRACE_PACKFILE to dump the
verbatim packfile.
There are a few other positive fallouts that come from
rearranging this code:
- We currently disable the packet trace after seeing the
PACK header, even though we may get human-readable lines
on other sidebands; now we include them in the trace.
- We currently try to print "PACK ..." in the trace to
indicate that the packfile has started. But because we
disable packet tracing, we never printed this line. We
will now do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use trace_performance to measure and print execution time and command line
arguments of the entire main() function. In constrast to the shell's 'time'
utility, which measures total time of the parent process, this logs all
involved git commands recursively. This is particularly useful to debug
performance issues of scripted commands (i.e. which git commands were
called with which parameters, and how long did they execute).
Due to git's deliberate use of exit(), the implementation uses an atexit
routine rather than just adding trace_performance_since() at the end of
main().
Usage example: > GIT_TRACE_PERFORMANCE=~/git-trace.log git stash list
Creates a log file like this:
23:57:38.638765 trace.c:405 performance: 0.000310107 s: git command: 'git' 'rev-parse' '--git-dir'
23:57:38.644387 trace.c:405 performance: 0.000261759 s: git command: 'git' 'rev-parse' '--show-toplevel'
23:57:38.646207 trace.c:405 performance: 0.000304468 s: git command: 'git' 'config' '--get-colorbool' 'color.interactive'
23:57:38.648491 trace.c:405 performance: 0.000241667 s: git command: 'git' 'config' '--get-color' 'color.interactive.help' 'red bold'
23:57:38.650465 trace.c:405 performance: 0.000243063 s: git command: 'git' 'config' '--get-color' '' 'reset'
23:57:38.654850 trace.c:405 performance: 0.025126313 s: git command: 'git' 'stash' 'list'
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add trace_performance and trace_performance_since macros that print a
duration and an optional printf-formatted text to the file specified in
environment variable GIT_TRACE_PERFORMANCE.
These macros, in conjunction with getnanotime(), are intended to simplify
performance measurements from within the application (i.e. profiling via
manual instrumentation, rather than using an external profiling tool).
Unless enabled via GIT_TRACE_PERFORMANCE, these macros have no noticeable
impact on performance, so that test code for well known time killers may
be shipped in release builds. Alternatively, a developer could provide an
additional performance patch (not meant for master) that allows reviewers
to reproduce performance tests more easily, e.g. on other platforms or
using their own repositories.
Usage examples:
Simple use case (measure one code section):
uint64_t start = getnanotime();
/* code section to measure */
trace_performance_since(start, "foobar");
Complex use case (measure repetitive code sections):
uint64_t t = 0;
for (;;) {
/* ignore */
t -= getnanotime();
/* code section to measure */
t += getnanotime();
/* ignore */
}
trace_performance(t, "frotz");
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a getnanotime() function that returns nanoseconds since 01/01/1970 as
unsigned 64-bit integer (i.e. overflows in july 2554). This is easier to
work with than e.g. struct timeval or struct timespec. Basing the timer on
the epoch allows using the results with other time-related APIs.
To simplify adaption to different platforms, split the implementation into
a common getnanotime() and a platform-specific highres_nanos() function.
The common getnanotime() function handles errors, falling back to
gettimeofday() if highres_nanos() isn't implemented or doesn't work.
getnanotime() is also responsible for normalizing to the epoch. The offset
to the system clock is calculated only once on initialization, i.e.
manually setting the system clock has no impact on the timer (except if
the fallback gettimeofday() is in use). Git processes are typically short
lived, so we don't need to handle clock drift.
The highres_nanos() function returns monotonically increasing nanoseconds
relative to some arbitrary point in time (e.g. system boot), or 0 on
failure. Providing platform-specific implementations should be relatively
easy, e.g. adapting to clock_gettime() as defined by the POSIX realtime
extensions is seven lines of code.
This version includes highres_nanos() implementations for:
* Linux: using clock_gettime(CLOCK_MONOTONIC)
* Windows: using QueryPerformanceCounter()
Todo:
* enable clock_gettime() on more platforms
* add Mac OSX version, e.g. using mach_absolute_time + mach_timebase_info
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is useful to see where trace output came from.
Add 'const char *file, int line' parameters to the printing functions and
rename them to *_fl.
Add trace_printf* and trace_strbuf macros resolving to the *_fl functions
and let the preprocessor fill in __FILE__ and __LINE__.
As the trace_printf* functions take a variable number of arguments, this
requires variadic macros (i.e. '#define foo(...) foo_impl(__VA_ARGS__)'.
Though part of C99, it is unclear whether older compilers support this.
Thus keep the old functions and only enable variadic macros for GNUC and
MSVC 2005+ (_MSC_VER 1400). This has the nice side effect that the old
C-style declarations serve as documentation how the macros are to be used.
Print 'file:line ' as prefix to each trace line. Align the remaining trace
output at column 40 to accommodate 18 char file names + 4 digit line
number (currently there are 30 *.c files of length 18 and just 11 of 19).
Trace output from longer source files (e.g. builtin/receive-pack.c) will
not be aligned.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No functional changes, just move stuff around so that the next patch isn't
that ugly...
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To be able to add a common prefix or suffix to all trace output (e.g.
a timestamp or file:line of the caller), factor out common setup and
cleanup tasks of the trace* functions.
When adding a common prefix, it makes sense that the output of each trace
call starts on a new line. Add '\n' in case the caller forgot.
Note that this explicitly limits trace output to line-by-line, it is no
longer possible to trace-print just part of a line. Until now, this was
just an implicit assumption (trace-printing part of a line worked, but
messed up the trace file if multiple threads or processes were involved).
Thread-safety / inter-process-safety is also the reason why we need to do
the prefixing and suffixing in memory rather than issuing multiple write()
calls. Write_or_whine_pipe() / xwrite() is atomic unless the size exceeds
MAX_IO_SIZE (8MB, see wrapper.c). In case of trace_strbuf, this costs an
additional string copy (which should be irrelevant for performance in light
of actual file IO).
While we're at it, rename trace_strbuf's 'buf' argument, which suggests
that the function is modifying the buffer. Trace_strbuf() currently is the
only trace API that can print arbitrary binary data (without barfing on
'%' or stopping at '\0'), so 'data' seems more appropriate.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The trace API currently rechecks the environment variable and reopens the
trace file on every API call. This has the ugly side effect that errors
(e.g. file cannot be opened, or the user specified a relative path) are
also reported on every call. Performance can be improved by about factor
three by remembering the environment state and keeping the file open.
Replace the 'const char *key' parameter in the API with a pointer to a
'struct trace_key' that bundles the environment variable name with
additional, trace-internal state. Change the call sites of these APIs to
use a static 'struct trace_key' instead of a string constant.
In trace.c::get_trace_fd(), save and reuse the file descriptor in 'struct
trace_key'.
Add a 'trace_disable()' API, so that packet_trace() can cleanly disable
tracing when it encounters packed data (instead of using unsetenv()).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The format parameter to trace_printf functions is sometimes abbreviated
'fmt'. Rename to 'format' everywhere (consistent with POSIX' printf
specification).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also include direct dependencies (strbuf.h and git-compat-util.h for
__attribute__) so that trace.h can be used independently of cache.h, e.g.
in test programs.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
