| Age | Commit message (Collapse) | Author |
|---|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, Git's source code treats all timestamps as if they were
unsigned longs. Therefore, it is okay to write "%lu" when printing them.
There is a substantial problem with that, though: at least on Windows,
time_t is *larger* than unsigned long, and hence we will want to switch
away from the ill-specified `unsigned long` data type.
So let's introduce the pseudo format "PRItime" (currently simply being
defined to "lu") to make it easier to change the data type used for
timestamps.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, Git's source code represents all timestamps as `unsigned
long`. In preparation for using a more appropriate data type, let's
introduce a symbol `parse_timestamp` (currently being defined to
`strtoul`) where appropriate, so that we can later easily switch to,
say, use `strtoull()` instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code refers to timestamps as unsigned long, which is
ill-defined, as there is no guarantee about the number of bits that
data type has.
In preparation of switching to another data type that is large enough
to hold "far in the future" dates, we need to prepare the t0006-date.sh
script for the case where we *still* cannot format those dates if the
system library uses 32-bit time_t.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough to
capture dates that are "absurdly far in the future".
It is perfectly valid by the C standard, of course, for the `long` data
type to refer to 32-bit integers. That is why the `time_t` data type
exists: so that it can be 64-bit even if `long` is 32-bit. Git's source
code simply uses an incorrect data type for timestamps, is all.
The earlier quick fix 6b9c38e14cd (t0006: skip "far in the future" test
when unsigned long is not long enough, 2016-07-11) papered over this
issue simply by skipping the respective test cases on platforms where
they would fail due to the data type in use.
This quick fix, however, tests for *long* to be 64-bit or not. What we
need, though, is a test that says whether *whatever data type we use for
timestamps* is 64-bit or not.
The same quick fix was used to handle the similar problem where Git's
source code uses `unsigned long` to represent size, instead of `size_t`,
conflating the two issues.
So let's just add another prerequisite to test specifically whether
timestamps are represented by a 64-bit data type or not. Later, after we
switch to a larger data type, we can flip that prerequisite to test
`time_t` instead of `long`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hotfix for a topic that is already in 'master'.
* jh/memihash-opt:
p0004: make perf test executable
t3008: skip lazy-init test on a single-core box
test-online-cpus: helper to return cpu count
name-hash: fix buffer overrun
|
|
* sf/putty-w-args:
connect.c: handle errors from split_cmdline
|
|
"git p4" used "name-rev HEAD" when it wants to learn what branch is
checked out; it should use "symbolic-ref HEAD".
* ld/p4-current-branch-fix:
git-p4: don't use name-rev to get current branch
git-p4: add read_pipe_text() internal function
git-p4: add failing test for name-rev rather than symbolic-ref
|
|
* dt/gc-ignore-old-gc-logs:
t6500: wait for detached auto gc at the end of the test script
|
|
Clean up fallouts from recent tightening of the set-up sequence,
where Git barfs when repository information is accessed without
first ensuring that it was started in a repository.
* jk/no-looking-at-dotgit-outside-repo:
test-read-cache: setup git dir
has_sha1_file: don't bother if we are not in a repository
|
|
The "submodule" specific field in the ref_store structure is
replaced with a more generic "gitdir" that can later be used also
when dealing with ref_store that represents the set of refs visible
from the other worktrees.
* nd/files-backend-git-dir: (28 commits)
refs.h: add a note about sorting order of for_each_ref_*
t1406: new tests for submodule ref store
t1405: some basic tests on main ref store
t/helper: add test-ref-store to test ref-store functions
refs: delete pack_refs() in favor of refs_pack_refs()
files-backend: avoid ref api targeting main ref store
refs: new transaction related ref-store api
refs: add new ref-store api
refs: rename get_ref_store() to get_submodule_ref_store() and make it public
files-backend: replace submodule_allowed check in files_downcast()
refs: move submodule code out of files-backend.c
path.c: move some code out of strbuf_git_path_submodule()
refs.c: make get_main_ref_store() public and use it
refs.c: kill register_ref_store(), add register_submodule_ref_store()
refs.c: flatten get_ref_store() a bit
refs: rename lookup_ref_store() to lookup_submodule_ref_store()
refs.c: introduce get_main_ref_store()
files-backend: remove the use of git_path()
files-backend: add and use files_ref_path()
files-backend: add and use files_reflog_path()
...
|
|
If a patch e-mail had its first paragraph after an in-body header
indented (even after a blank line after the in-body header line),
the indented line was mistook as a continuation of the in-body
header. This has been fixed.
* lt/mailinfo-in-body-header-continuation:
mailinfo: fix in-body header continuations
|
|
"git push --recurse-submodules --push-option=<string>" learned to
propagate the push option recursively down to pushes in submodules.
* bw/push-options-recursively-to-submodules:
push: propagate remote and refspec with --recurse-submodules
submodule--helper: add push-check subcommand
remote: expose parse_push_refspec function
push: propagate push-options with --recurse-submodules
push: unmark a local variable as static
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
The output from "git status --short" has been extended to show
various kinds of dirtyness in submodules differently; instead of to
"M" for modified, 'm' and '?' can be shown to signal changes only
to the working tree of the submodule but not the commit that is
checked out.
* sb/submodule-short-status:
submodule.c: correctly handle nested submodules in is_submodule_modified
short status: improve reporting for submodule changes
submodule.c: stricter checking for submodules in is_submodule_modified
submodule.c: port is_submodule_modified to use porcelain 2
submodule.c: convert is_submodule_modified to use strbuf_getwholeline
submodule.c: factor out early loop termination in is_submodule_modified
submodule.c: use argv_array in is_submodule_modified
|
|
It looks like in 89c3b0ad43 (name-hash: add perf test for lazy_init_name_hash,
2017-03-23) p0004 was not created with the execute unix rights.
Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* js/difftool-builtin:
difftool: fix use-after-free
difftool: avoid strcpy
|
|
"git diff --submodule=diff" learned to work better in a project
with a submodule that in turn has its own submodules.
* sb/show-diff-for-submodule-in-diff-fix:
diff: submodule inline diff to initialize env array.
|
|
Update error handling for codepath that deals with corrupt loose
objects.
* jk/loose-object-info-report-error:
index-pack: detect local corruption in collision check
sha1_loose_object_info: return error for corrupted objects
|
|
git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using name-rev to find the current git branch means that git-p4
does not correctly get the current branch name if there are
multiple branches pointing at HEAD, or a tag.
This change adds a test case which demonstrates the problem.
Configuring which branches are allowed to be submitted from goes
wrong, as git-p4 gets confused about which branch is in use.
This appears to be the only place that git-p4 actually cares
about the current branch.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b1ef400e (setup_git_env: avoid blind fall-back to ".git") made programs
that tried to access a repository without initializing properly die with
a diagnostic message. One offender is test-read-cache, which is used in
p0002. Fix it by calling setup_git_directory() before accessing the
index.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The last test in 't6500-gc', 'background auto gc does not run if
gc.log is present and recent but does if it is old', added in
a831c06a2 (gc: ignore old gc.log files, 2017-02-10), may sporadically
trigger an error message from the test harness:
rm: cannot remove 'trash directory.t6500-gc/.git/objects': Directory not empty
The test in question ends with executing an auto gc in the backround,
which occasionally takes so long that it's still running when
'test_done' is about to remove the trash directory. This 'rm -rf
$trash' in the foreground might race with the detached auto gc to
create and delete files and directories, and gc might (re-)create a
path that 'rm' already visited and removed, triggering the above error
message when 'rm' attempts to remove its parent directory.
Commit bb05510e5 (t5510: run auto-gc in the foreground, 2016-05-01)
fixed the same problem in a different test script by simply
disallowing background gc. Unfortunately, what worked there is not
applicable here, because the purpose of this test is to check the
behavior of a detached auto gc.
Make sure that the test doesn't continue before the gc is finished in
the background with a clever bit of shell trickery:
- Open fd 9 in the shell, to be inherited by the background gc
process, because our daemonize() only closes the standard fds 0,
1 and 2.
- Duplicate this fd 9 to stdout.
- Read 'git gc's stdout, and thus fd 9, through a command
substitution. We don't actually care about gc's output, but this
construct has two useful properties:
- This read blocks until stdout or fd 9 are open. While stdout is
closed after the main gc process creates the background process
and exits, fd 9 remains open until the backround process exits.
- The variable assignment from the command substitution gets its
exit status from the command executed within the command
substitution, i.e. a failing main gc process will cause the test
to fail.
Note, that this fd trickery doesn't work on Windows, because due to
MSYS limitations the git process only inherits the standard fds 0, 1
and 2 from the shell. Luckily, it doesn't matter in this case,
because on Windows daemonize() is basically a noop, thus 'git gc
--auto' always runs in the foreground.
And since we can now continue the test reliably after the detached gc
finished, check that there is only a single packfile left at the end,
i.e. that the detached gc actually did what it was supposed to do.
Also add a comment at the end of the test script to warn developers of
future tests about this issue of long running detached gc processes.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit e9d9a8a4d (connect: handle putty/plink also in
GIT_SSH_COMMAND, 2017-01-02) added a call to
split_cmdline(), but checks only for a non-zero return to
see if we got any output. Since the function returns
negative values (and a NULL argv) on error, we end up
dereferencing NULL and segfaulting.
Arguably we could report on the parsing error here, but it's
probably not worth it. This is a best-effort attempt to see
if we are using plink. So we can simply return here with
"no, it wasn't plink" and let the shell actually complain
about the bogus quoting.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The left and right base directories were pointed to the buf field of
two strbufs, which were subject to change.
A contrived test case shows the problem where a file with a long enough
name to force the strbuf to grow is up-to-date (hence the code path is
used where the work tree's version of the file is reused), and then a
file that is not up-to-date needs to be written (hence the code path is
used where checkout_entry() uses the previously recorded base_dir that
is invalid by now).
Let's just copy the base_dir strings for use with checkout_entry(),
never touch them until the end, and release them then. This is an easily
verifiable fix (as opposed to the next-obvious alternative: to re-set
base_dir after every loop iteration).
This fixes https://github.com/git-for-windows/git/issues/1124
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The lazy-init codepath will not be exercised uniless threaded. Skip
the entire test on a single-core box. Also replace a hard-coded
constant of 2000 (number of cache entries to manifacture for tests)
with a variable with a human readable name.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Created helper executable to print the value of online_cpus()
allowing multi-threaded tests to be skipped when appropriate.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An empty line should stop any pending in-body headers, and start the
actual body parsing.
This also modifies the original test for the in-body headers to actually
have a real commit body that starts with spaces, and changes the test to
check that the long line matches _exactly_, and doesn't get extra data
from the body.
Fixes:6b4b013f1884 ("mailinfo: handle in-body header continuations")
Cc: Jonathan Tan <jonathantanmy@google.com>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "push --recurse-submodules" to propagate, if given a name as remote, the
provided remote and refspec recursively to the pushes performed in the
submodules. The push will therefore only succeed if all submodules have a
remote with such a name configured.
Note that "push --recurse-submodules" with a path or URL as remote will not
propagate the remote or refspec and instead use the default remote and refspec
configured in the submodule, preserving the current behavior.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach push --recurse-submodules to propagate push-options recursively to
the pushes performed in the submodules.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default behaviour of "git log" in an interactive session has
been changed to enable "--decorate".
* ah/log-decorate-default-to-auto:
log: if --decorate is not given, default to --decorate=auto
|
|
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
|
|
David reported:
> When I try to run `git diff --submodule=diff` in a submodule which has
> it's own submodules that have changes I get the error: fatal: bad
> object.
This happens, because we do not properly initialize the environment
in which the diff is run in the submodule. That means we inherit the
environment from the main process, which sets environment variables.
(Apparently we do set environment variables which we do not set
when not in a submodules, i.e. the .git directory is linked)
This commit, just like fd47ae6a5b (diff: teach diff to display
submodule difference with an inline diff, 2016-08-31) introduces bad
test code (i.e. hard coded hash values), which will be cleanup up in
a later patch.
Reported-by: David Parrish <daveparrish@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we notice that we have a local copy of an incoming
object, we compare the two objects to make sure we haven't
found a collision. Before we get to the actual object
bytes, though, we compare the type and size from
sha1_object_info().
If our local object is corrupted, then the type will be
OBJ_BAD, which obviously will not match the incoming type,
and we'll report "SHA1 COLLISION FOUND" (with capital
letters and everything). This is confusing, as the problem
is not a collision but rather local corruption. We should
report that instead (just like we do if reading the rest of
the object content fails a few lines later).
Note that we _could_ just ignore the error and mark it as a
non-collision. That would let you "git fetch" to replace a
corrupted object. But it's not a very reliable method for
repairing a repository. The earlier want/have negotiation
tries to get the other side to omit objects we already have,
and it would not realize that we are "missing" this
corrupted object. So we're better off complaining loudly
when we see corruption, and letting the user take more
drastic measures to repair (like making a full clone
elsewhere and copying the pack into place).
Note that the test sets transfer.unpackLimit in the
receiving repository so that we use index-pack (which is
what does the collision check). Normally for such a small
push we'd use unpack-objects, which would simply try to
write the loose object, and discard the new one when we see
that there's already an old one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When sha1_loose_object_info() finds that a loose object file
cannot be stat(2)ed or mmap(2)ed, it returns -1 to signal an
error to the caller. However, if it found that the loose
object file is corrupt and the object data cannot be used
from it, it stuffs OBJ_BAD into "type" field of the
object_info, but returns zero (i.e., success), which can
confuse callers.
This is due to 052fe5eac (sha1_loose_object_info: make type
lookup optional, 2013-07-12), which switched the return to a
strict success/error, rather than returning the type (but
botched the return).
Callers of regular sha1_object_info() don't notice the
difference, as that function returns the type (which is
OBJ_BAD in this case). However, direct callers of
sha1_object_info_extended() see the function return success,
but without setting any meaningful values in the object_info
struct, leading them to access potentially uninitialized
memory.
The easiest way to see the bug is via "cat-file -s", which
will happily ignore the corruption and report whatever
value happened to be in the "size" variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add check for the end of the entries for the thread partition.
Add test for lazy init name hash with specific directory structure
The lazy init hash name was causing a buffer overflow when the last
entry in the index was multiple folder deep with parent folders that
did not have any files in them.
This adds a test for the boundary condition of the thread partitions
with the folder structure that was triggering the buffer overflow.
The fix was to check if it is the last entry for the thread partition
in the handle_range_dir and not try to use the next entry in the cache.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert this function by changing the declaration and definition and
applying the following semantic patch to update the callers:
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2.hash)
+ sha1_array_lookup(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_lookup(E1, E2->hash)
+ sha1_array_lookup(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent update to "rebase -i" stopped running hooks for the "git
commit" command during "reword" action, which has been fixed.
* js/rebase-i-reword-to-run-hooks:
sequencer: allow the commit-msg hooks to run during a `reword`
sequencer: make commit options more extensible
t7504: document regression: reword no longer calls commit-msg
|
|
On many keyboards, typing "@{" involves holding down SHIFT key and
one can easily end up with "@{Up..." when typing "@{upstream}". As
the upstream/push keywords do not appear anywhere else in the syntax,
we can safely accept them case insensitively without introducing
ambiguity or confusion to solve this.
* ab/case-insensitive-upstream-and-push-marker:
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively
|
|
Doc updates.
* ab/test-readme-updates:
t/README: clarify the test_have_prereq documentation
t/README: change "Inside <X> part" to "Inside the <X> part"
t/README: link to metacpan.org, not search.cpan.org
|
|
FreeBSD implementation of getcwd(3) behaved differently when an
intermediate directory is unreadable/unsearchable depending on the
length of the buffer provided, which our strbuf_getcwd() was not
aware of. strbuf_getcwd() has been taught to cope with it better.
* rs/freebsd-getcwd-workaround:
strbuf: support long paths w/o read rights in strbuf_getcwd() on FreeBSD
|
|
A few commands that recently learned the "--recurse-submodule"
option misbehaved when started from a subdirectory of the
superproject.
* bw/recurse-submodules-relative-fix:
ls-files: fix bug when recursing with relative pathspec
ls-files: fix typo in variable name
grep: fix bug when recursing with relative pathspec
setup: allow for prefix to be passed to git commands
grep: fix help text typo
|
|
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
|
