| Age | Commit message (Collapse) | Author |
|---|
|
When "git merge" finds that it cannot perform a merge, it should
restore the working tree to the state before the command was
initiated, but in some corner cases it didn't.
* en/merge-restore-to-pristine:
merge: do not exit restore_state() prematurely
merge: ensure we can actually restore pre-merge state
merge: make restore_state() restore staged state too
merge: fix save_state() to work when there are stat-dirty files
merge: do not abort early if one strategy fails to handle the merge
merge: abort if index does not match HEAD for trivial merges
merge-resolve: abort if index does not match HEAD
merge-ort-wrappers: make printed message match the one from recursive
|
|
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
|
|
"git cat-file" learned an option to use the mailmap when showing
commit and tag objects.
* sa/cat-file-mailmap:
cat-file: add mailmap support
ident: rename commit_rewrite_person() to apply_mailmap_to_header()
ident: move commit_rewrite_person() to ident.c
revision: improve commit_rewrite_person()
|
|
"git ls-files" learns the "--format" option to tweak its output.
* zh/ls-files-format:
ls-files: introduce "--format" option
|
|
There was a bug in the codepath to upgrade generation information
in commit-graph from v1 to v2 format, which has been corrected.
* tb/commit-graph-genv2-upgrade-fix:
commit-graph: fix corrupt upgrade from generation v1 to v2
commit-graph: introduce `repo_find_commit_pos_in_graph()`
t5318: demonstrate commit-graph generation v2 corruption
|
|
Fix for a bug that makes write-tree to fail to write out a
non-existent index as a tree, introduced in 2.37.
* tk/untracked-cache-with-uall:
read-cache: make `do_read_index()` always set up `istate->repo`
|
|
"git checkout" miscounted the paths it updated, which has been
corrected.
source: <cover.1657799213.git.matheus.bernardino@usp.br>
* mt/checkout-count-fix:
checkout: fix two bugs on the final count of updated entries
checkout: show bug about failed entries being included in final report
checkout: document bug where delayed checkout counts entries twice
|
|
"git rebase -i" learns to update branches whose tip appear in the
rebased range with "--update-refs" option.
source: <pull.1247.v5.git.1658255624.gitgitgadget@gmail.com>
* ds/rebase-update-ref:
sequencer: notify user of --update-refs activity
sequencer: ignore HEAD ref under --update-refs
rebase: add rebase.updateRefs config option
sequencer: rewrite update-refs as user edits todo list
rebase: update refs from 'update-ref' commands
rebase: add --update-refs option
sequencer: add update-ref command
sequencer: define array with enum values
rebase-interactive: update 'merge' description
branch: consider refs under 'update-refs'
t2407: test branches currently using apply backend
t2407: test bisect and rebase as black-boxes
|
|
Avoid "white/black-list" in documentation and code comments.
* ds/doc-wo-whitelist:
transport.c: avoid "whitelist"
t: avoid "whitelist"
git.txt: remove redundant language
git-cvsserver: clarify directory list
daemon: clarify directory arguments
|
|
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
* mb/config-document-include:
config.txt: document include, includeIf
|
|
Test fix.
* ma/t4200-update:
t4200: drop irrelevant code
|
|
Omit fsync-related trace2 entries when their values are all zero.
* ab/squelch-empty-fsync-traces:
trace2: only include "fsync" events if we git_fsync()
|
|
Add a new option "--format" that outputs index entries
informations in a custom format, taking inspiration
from the option with the same name in the `git ls-tree`
command.
"--format" cannot used with "-s", "-o", "-k", "-t",
" --resolve-undo","--deduplicate" and "--eol".
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, if the user:
* Had no local changes before starting the merge
* A merge strategy makes changes to the working tree/index but returns
with exit status 2
Then we'd call restore_state() to clean up the changes and either let
the next merge strategy run (if there is one), or exit telling the user
that no merge strategy could handle the merge. Unfortunately,
restore_state() did not clean up the changes as expected; that function
was a no-op if the stash was a null, and the stash would be null if
there were no local changes before starting the merge. So, instead of
"Rewinding the tree to pristine..." as the code claimed, restore_state()
would leave garbage around in the index and working tree (possibly
including conflicts) for either the next merge strategy or for the user
after aborting the merge. And in the case of aborting the merge, the
user would be unable to run "git merge --abort" to get rid of the
unintended leftover conflicts, because the merge control files were not
written as it was presumed that we had restored to a clean state
already.
Fix the main problem by making sure that restore_state() only skips the
stash application if the stash is null rather than skipping the whole
function.
However, there is a secondary problem -- since merge.c forks
subprocesses to do the cleanup, the in-memory index is left out-of-sync.
While there was a refresh_cache(REFRESH_QUIET) call that attempted to
correct that, that function would not handle cases where the previous
merge strategy added conflicted entries. We need to drop the index and
re-read it to handle such cases.
(Alternatively, we could stop forking subprocesses and instead call some
appropriate function to do the work which would update the in-memory
index automatically. For now, just do the simple fix.)
Also, add a testcase checking this, one for which the octopus strategy
fails on the first commit it attempts to merge, and thus which it
cannot handle at all and must completely bail on (as per the "exit 2"
code path of commit 98efc8f3d8 ("octopus: allow manual resolve on the
last round.", 2006-01-13)).
Reported-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are multiple issues at play here:
1) If `git merge` is invoked with staged changes, it should abort
without doing any merging, and the user's working tree and index
should be the same as before merge was invoked.
2) Merge strategies are responsible for enforcing the index == HEAD
requirement. (See 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17) for some history
around this.)
3) Merge strategies can bail saying they are not an appropriate
handler for the merge in question (possibly allowing other
strategies to be used instead).
4) Merge strategies can make changes to the index and working tree,
and have no expectation to clean up after themselves, *even* if
they bail out and say they are not an appropriate handler for
the merge in question. (The `octopus` merge strategy does this,
for example.)
5) Because of (3) and (4), builtin/merge.c stashes state before
trying merge strategies and restores it afterward.
Unfortunately, if users had staged changes before calling `git merge`,
builtin/merge.c could do the following:
* stash the changes, in order to clean up after the strategies
* try all the merge strategies in turn, each of which report they
cannot function due to the index not matching HEAD
* restore the changes via "git stash apply"
But that last step would have the net effect of unstaging the user's
changes. Fix this by adding the "--index" option to "git stash apply".
While at it, also squelch the stash apply output; we already report
"Rewinding the tree to pristine..." and don't need a detailed `git
status` report afterwards. Also while at it, switch to using strvec
so folks don't have to count the arguments to ensure we avoided an
off-by-one error, and so it's easier to add additional arguments to
the command.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there are stat-dirty files, but no files are modified,
`git stash create` exits with unsuccessful status. This causes merge
to fail. Copy some code from sequencer.c's create_autostash to refresh
the index first to avoid this problem.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/merge is setup to allow multiple strategies to be specified,
and it will find the "best" result and use it. This is defeated if
some of the merge strategies abort early when they cannot handle the
merge. Fix the logic that calls recursive and ort to not do such an
early abort, but instead return "2" or "unhandled" so that the next
strategy can try to handle the merge.
Coming up with a testcase for this is somewhat difficult, since
recursive and ort both handle nearly any two-headed merge (there is
a separate code path that checks for non-two-headed merges and
already returns "2" for them). So use a somewhat synthetic testcase
of having the index not match HEAD before the merge starts, since all
merge strategies will abort for that.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in the last commit and the links therein (especially commit
9822175d2b ("Ensure index matches head before invoking merge machinery,
round N", 2019-08-17), we have had a very long history of problems with
failing to enforce the requirement that index matches HEAD when starting
a merge.
The "trivial merge" logic in builtin/merge.c is yet another such case
we previously missed. Add a check for it to ensure it aborts if the
index does not match HEAD, and add a testcase where this fix is needed.
Note that the fix here would also incidentally be an alternative fix
for the testcase added in the last patch, but the fix in the last patch
is still needed when multiple merge strategies are in use, so tweak the
testcase from the previous commit so that it continues to exercise the
codepath added in the last commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in commit 9822175d2b ("Ensure index matches head before
invoking merge machinery, round N", 2019-08-17), we have had a very
long history of problems with failing to enforce the requirement that
index matches HEAD when starting a merge. One of the commits
referenced in the long tale of issues arising from lax enforcement of
this requirement was commit 55f39cf755 ("merge: fix misleading
pre-merge check documentation", 2018-06-30), which tried to document
the requirement and noted there were some exceptions. As mentioned in
that commit message, the `resolve` strategy was the one strategy that
did not have an explicit index matching HEAD check, and the reason it
didn't was that I wasn't able to discover any cases where the
implementation would fail to catch the problem and abort, and didn't
want to introduce unnecessary performance overhead of adding another
check.
Well, today I discovered a testcase where the implementation does not
catch the problem and so an explicit check is needed. Add a testcase
that previously would have failed, and update git-merge-resolve.sh to
have an explicit check. Note that the code is copied from 3ec62ad9ff
("merge-octopus: abort if index does not match HEAD", 2016-04-09), so
that we reuse the same message and avoid making translators need to
translate some new message.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A fix for a regression in test framework.
* js/ci-github-workflow-markup:
tests: fix incorrect --write-junit-xml code
|
|
Introduce a discovery.barerepository configuration variable that
allows users to forbid discovery of bare repositories.
* gc/bare-repo-discovery:
setup.c: create `safe.bareRepository`
safe.directory: use git_protected_config()
config: learn `git_protected_config()`
Documentation: define protected configuration
Documentation/git-config.txt: add SCOPES section
|
|
If there is no index file, e.g., because the repository has just been
created, we return zero early (unless `must_exist` makes us die
instead.)
This early return means we do not set up `istate->repo`. With
`core.untrackedCache=true`, the recent e6a653554b ("untracked-cache:
support '--untracked-files=all' if configured", 2022-03-31) will
eventually pass down `istate->repo` as a null pointer to
`repo_config_get_string()`, causing a segmentation fault.
If we do hit this early return, set up `istate->repo` similar to when we
actually read the index.
Reported-by: Joey Hess <id@joeyh.name>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier, HTTP transport clients learned to tell the server side
what locale they are in by sending Accept-Language HTTP header, but
this was done only for some requests but not others.
* ll/curl-accept-language:
remote-curl: send Accept-Language header to server
|
|
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
|
|
A corner case bug where lazily fetching objects from a promisor
remote resulted in infinite recursion has been corrected.
* hx/lookup-commit-in-graph-fix:
t5330: remove run_with_limited_processses()
commit-graph.c: no lazy fetch in lookup_commit_in_graph()
|
|
The resolve-undo information in the index was not protected against
GC, which has been corrected.
* jc/resolve-undo:
fsck: do not dereference NULL while checking resolve-undo data
revision: mark blobs needed for resolve-undo as reachable
|
|
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The branch_checked_out() helper helps commands like 'git branch' and
'git fetch' from overwriting refs that are currently checked out in
other worktrees.
A future update to 'git rebase' will introduce a new '--update-refs'
option which will update the local refs that point to commits that are
being rebased. To avoid collisions as the rebase completes, we want to
make the future data store for these refs to be considered by
branch_checked_out().
The data store is a plaintext file inside the 'rebase-merge' directory
for that worktree. The file lists refnames followed by two OIDs, each on
separate lines. The OIDs will be used to store the original values of
the refs and the to-be-written values as the rebase progresses, but can
be ignored at the moment.
Create a new sequencer_get_update_refs_state() method that parses this
file and populates a struct string_list with the ref-OID pairs. We can
then use this list to add to the current_checked_out_branches strmap
used by branch_checked_out().
To properly navigate to the rebase directory for a given worktree,
extract the static strbuf_worktree_gitdir() method to a public API
method.
We can test that this works without having Git write this file by
artificially creating one in our test script, at least until 'git rebase
--update-refs' is implemented and we can use it directly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests in t2407 that verify the branch_checked_out() helper in the
case of bisects and rebases were added by 9347303db89 (branch: check for
bisects and rebases, 2022-06-08). However, that commit failed to check
for rebases that are using the 'apply' backend.
Add a test that checks the apply backend. The implementation was already
correct here, but it is good to have regression tests before modifying
the implementation further.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests added by d2ba271aad0 (branch: check for bisects and rebases,
2022-06-14) modified hidden state to verify the branch_checked_out()
helper. While this indeed checks that the method implementation is _as
designed_, it doesn't show that it is _correct_. Specifically, if 'git
bisect' or 'git rebase' change their back-end for preserving refs, then
these tests do not demonstrate that drift as a bug in
branch_checked_out().
Modify the tests in t2407 to actually rely on a paused bisect or rebase.
This requires adding the !SANITIZE_LEAK prereq for tests using those
builtins. The logic is still tested for leaks in the final test which
does set up that back-end directly for an error state that should not be
possible using Git commands.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The word "whitelist" has cultural implications that are not inclusive.
Thankfully, it is not difficult to reword and avoid its use.
Focus on changes in the test scripts, since most of the changes are in
comments and test names. The renamed test_allow_var helper is only used
once inside the widely-used test_proto helper.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation and error messages for git-cvsserver include some
references to a "whitelist" that is not otherwise included in the
documentation. When different parts of the documentation do not use
common language, this can lead to confusion as to how things are meant
to operate.
Further, the word "whitelist" has cultural implications that make its
use non-inclusive. Thankfully, we can remove it while increasing
clarity.
Update Documentation/git-cvsserver.txt in a similar way to the previous
change to Documentation/git-daemon.txt. The optional '<directory>...'
list can specify a list of allowed directories. We refer to that list
directly inside of the documentation for the GIT_CVSSERVER_ROOT
environment variable.
While modifying this documentation, update the environment variables to
use a list format. We use the modern way of tabbing the description of
each variable in this section. We do _not_ update the description of
'<directory>...' to use tabs this way since the rest of the items in the
OPTIONS list do not use this modern formatting.
A single error message in the actual git-cvsserver.perl code refers to
the whitelist during argument parsing. Instead, refer to the directory
list that has been clarified in the documentation.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step to rewrite more parts of "git submodule" in C.
* gc/submodule-use-super-prefix:
submodule--helper: remove display path helper
submodule--helper update: use --super-prefix
submodule--helper: remove unused SUPPORT_SUPER_PREFIX flags
submodule--helper: use correct display path helper
submodule--helper: don't recreate recursive prefix
submodule--helper update: use display path helper
submodule--helper tests: add missing "display path" coverage
|
|
Fixes a long-standing corner case bug around directory renames in
the merge-ort strategy.
* en/merge-dual-dir-renames-fix:
merge-ort: fix issue with dual rename and add/add conflict
merge-ort: shuffle the computation and cleanup of potential collisions
merge-ort: make a separate function for freeing struct collisions
merge-ort: small cleanups of check_for_directory_rename
t6423: add tests of dual directory rename plus add/add conflict
|
|
Tweak tests so that they still work when the "git init" template
did not create .git/info directory.
* ab/test-without-templates:
tests: don't assume a .git/info for .git/info/sparse-checkout
tests: don't assume a .git/info for .git/info/exclude
tests: don't assume a .git/info for .git/info/refs
tests: don't assume a .git/info for .git/info/attributes
tests: don't assume a .git/info for .git/info/grafts
tests: don't depend on template-created .git/branches
t0008: don't rely on default ".git/info/exclude"
|
|
Teach "make all" to build gitweb as well.
* ab/build-gitweb:
gitweb/Makefile: add a "NO_GITWEB" parameter
Makefile: build 'gitweb' in the default target
gitweb/Makefile: include in top-level Makefile
gitweb: remove "test" and "test-installed" targets
gitweb/Makefile: prepare to merge into top-level Makefile
gitweb/Makefile: clear up and de-duplicate the gitweb.{css,js} vars
gitweb/Makefile: add a $(GITWEB_ALL) variable
gitweb/Makefile: define all .PHONY prerequisites inline
|
|
Plug various memory leaks in test-tool commands.
* ab/test-tool-leakfix:
test-tool delta: fix a memory leak
test-tool ref-store: fix a memory leak
test-tool bloom: fix memory leaks
test-tool json-writer: fix memory leaks
test-tool regex: call regfree(), fix memory leaks
test-tool urlmatch-normalization: fix a memory leak
test-tool {dump,scrap}-cache-tree: fix memory leaks
test-tool path-utils: fix a memory leak
test-tool test-hash: fix a memory leak
|
|
Plug various memory leaks.
* ab/leakfix:
pull: fix a "struct oid_array" memory leak
cat-file: fix a common "struct object_context" memory leak
gc: fix a memory leak
checkout: avoid "struct unpack_trees_options" leak
merge-file: fix memory leaks on error path
merge-file: refactor for subsequent memory leak fix
cat-file: fix a memory leak in --batch-command mode
revert: free "struct replay_opts" members
submodule.c: free() memory from xgetcwd()
clone: fix memory leak in wanted_peer_refs()
check-ref-format: fix trivial memory leak
|
|
git-cat-file is used by tools like GitLab to get commit tag contents
that are then displayed to users. This content which has author,
committer or tagger information, could benefit from passing through the
mailmap mechanism before being sent or displayed.
This patch adds --[no-]use-mailmap command line option to the git
cat-file command. It also adds --[no-]mailmap option as an alias to
--[no-]use-mailmap.
This patch also introduces new test cases to test the mailmap mechanism in
git cat-file command.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: John Cai <johncai86@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While setting up an unresolved merge for `git rerere`, we run `git
rev-parse` and `git fmt-merge-msg` to create a variable `$fifth` and a
commit-message file `msg`, which we then never actually use. This has
been like that since these tests were added in 672d1b789b ("rerere:
migrate to parse-options API", 2010-08-05). This does exercise `git
rev-parse` and `git fmt-merge-msg`, but doesn't contribute to testing
`git rerere`. Drop these lines.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix the overly verbose trace2 logging added in 9a4987677d3 (trace2:
add stats for fsync operations, 2022-03-30) (first released with
v2.36.0).
Since that change every single "git" command invocation has included
these "data" events, even though we'll only make use of these with
core.fsyncMethod=batch, and even then only have non-zero values if
we're writing object data to disk. See c0f4752ed2f (core.fsyncmethod:
batched disk flushes for loose-objects, 2022-04-04) for that feature.
As we're needing to indent the trace2_data_intmax() lines let's
introduce helper variables to ensure that our resulting lines (which
were already too) don't exceed the recommendations of the
CodingGuidelines. Doing that requires either wrapping them twice, or
introducing short throwaway variable names, let's do the latter.
The result was that e.g. "git version" would previously emit a total
of 6 trace2 events with the GIT_TRACE2_EVENT target (version, start,
cmd_ancestry, cmd_name, exit, atexit), but afterwards would emit
8. We'd emit 2 "data" events before the "exit" event.
The reason we didn't catch this was that the trace2 unit tests added
in a15860dca3f (trace2: t/helper/test-trace2, t0210.sh, t0211.sh,
t0212.sh, 2019-02-22) would omit any "data" events that weren't the
ones it cared about. Before this change to the C code 6/7 of our
"t/t0212-trace2-event.sh" tests would fail if this change was applied
to "t/t0212/parse_events.perl".
Let's make the trace2 testing more strict, and further append any new
events types we don't know about in "t/t0212/parse_events.perl". Since
we only invoke the "test-tool trace2" there's no guarantee that we'll
catch other overly verbose events in the future, but we'll at least
notice if we start emitting new events that are issues every time we
log anything with trace2's JSON target.
We exclude the "data_json" event type, we'd otherwise would fail on
both "win test" and "win+VS test" CI due to the logging added in
353d3d77f4f (trace2: collect Windows-specific process information,
2019-02-22). It looks like that logging should really be using
trace2_cmd_ancestry() instead, which was introduced later in
2f732bf15e6 (tr2: log parent process name, 2021-07-21), but let's
leave it for now.
The fix-up to aaf81223f48 (unpack-objects: use stream_loose_object()
to unpack large objects, 2022-06-11) is needed because we're changing
the behavior of these events as discussed above. Since we'd always
emit a "hardware-flush" event the test added in aaf81223f48 wasn't
testing anything except that this trace2 data was unconditionally
logged. Even if "core.fsyncMethod" wasn't set to "batch" we'd pass the
test.
Now we'll check the expected number of "writeout" v.s. "flush" calls
under "core.fsyncMethod=batch", but note that this doesn't actually
test if we carried out the sync using that method, on a platform where
we'd have to fall back to fsync() each of those "writeout" would
really be a "flush" (i.e. a full fsync()).
But in this case what we're testing is that the logic in
"unpack-objects" behaves as expected, not the OS-specific question of
whether we actually were able to use the "bulk" method.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Build a typed sort function for the mergesort performance test tool
using DEFINE_LIST_SORT instead of calling llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of a slightly higher object text size.
Before:
0071.12: llist_mergesort() unsorted 0.24(0.22+0.01)
0071.14: llist_mergesort() sorted 0.12(0.10+0.01)
0071.16: llist_mergesort() reversed 0.12(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
With this patch:
0071.12: DEFINE_LIST_SORT unsorted 0.22(0.21+0.01)
0071.14: DEFINE_LIST_SORT sorted 0.11(0.10+0.01)
0071.16: DEFINE_LIST_SORT reversed 0.11(0.10+0.01)
__TEXT __DATA __OBJC others dec hex
6615 276 0 25832 32723 7fd3 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Define a typed sort function using DEFINE_LIST_SORT_DEBUG for the
mergesort sanity check instead of using llist_mergesort(). This gets
rid of the next pointer accessor functions and improves the performance
at the cost of slightly bigger object text.
Before:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 108.4 ms ± 0.2 ms [User: 106.7 ms, System: 1.2 ms]
Range (min … max): 108.0 ms … 108.8 ms 27 runs
__TEXT __DATA __OBJC others dec hex
6251 276 0 23172 29699 7403 t/helper/test-mergesort.o
With this patch:
Benchmark 1: t/helper/test-tool mergesort test
Time (mean ± σ): 94.0 ms ± 0.2 ms [User: 92.4 ms, System: 1.1 ms]
Range (min … max): 93.7 ms … 94.5 ms 31 runs
__TEXT __DATA __OBJC others dec hex
6407 276 0 24701 31384 7a98 t/helper/test-mergesort.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git config's tab completion does not yet know about the "include"
and "includeIf" sections, nor the related "path" variable.
Add a description for these two sections in
'Documentation/config/includeif.txt', which points to git-config's
documentation, specifically the "Includes" and "Conditional Includes"
subsections.
As a side effect, tab completion can successfully complete the
'include', 'includeIf', and 'include.add' expressions.
This effect is tested by two new ad-hoc tests.
Variable completion only works for "include" for now.
Credit for the ideas behind this patch goes to
Ævar Arnfjörð Bjarmason.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Manuel Boni <ziosombrero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit demonstrates a bug where a commit-graph using
generation v2 could enter a state where one of the GDA2 values has its
most-significant bit set (indicating that its value should be read from
the extended offset table in the GDO2 chunk) without having a GDO2 chunk
to read from.
This results in the following error message being displayed to the
caller:
fatal: commit-graph requires overflow generation data but has none
This bug arises in the following scenario:
- We decide to write a commit-graph using generation number v2, and
decide (correctly) that no GDO2 chunk is necessary (e.g., because
all of the commiter date offsets are no larger than 2^31-1).
- The v2 generation numbers are stored in the `->generation` member of
the commit slab holding `struct commit_graph_data`'s.
- Later on, `load_commit_graph_info()` is called, overwriting the
v2 generation data in the aforementioned slab with any existing v1
generation data.
Then, when the commit-graph code goes to write the GDA2 chunk via
`write_graph_chunk_generation_data()`, we use the overwritten generation
v1 data in a place where we expect to use a v2 generation number:
offset = commit_graph_data_at(c)->generation - c->date;
...because `commit_graph_data_at(c)->generation` used to hold the v2
generation data, but it was overwritten to contain the v1 generation
number via `load_commit_graph_info()`.
If the `offset` computation above overflows the v2 generation number
max, then `write_graph_chunk_generation_data()` will update its count of
large offsets and write the marker accordingly:
if (offset > GENERATION_NUMBER_V2_OFFSET_MAX) {
offset = CORRECTED_COMMIT_DATE_OFFSET_OVERFLOW | num_generation_data_overflows;
num_generation_data_overflows++;
}
and reads will look for the GDO2 chunk containing the overflowing v2
generation number, *after* the commit-graph code decided that no such
chunk was necessary.
The main problem is that the slab containing `struct commit_graph_data`
has a dual purpose. It is used to hold data that we are about to write
to disk while generating a commit-graph, as well as hold data that was
read from an existing commit-graph.
When the two mix, namely when the result of reading the commit-graph has
a side-effect that mixes poorly with an in-progress commit-graph write,
we end up with corrupt data.
A complete fix might be to introduce a new slab that is used exclusively
for writing, and gate access between the two slabs based on context
provided by the caller (e.g., whether this computation is part of a
"read" or "write" operation).
But a more minimal fix addresses the only known path which overwrites
the slab data, which is `compute_bloom_filters()` ->
`get_or_compute_bloom_filter()` -> `load_commit_graph_info()` ->
`fill_commit_graph_info()` by avoiding the last call which clobbers the
data altogether.
This path only needs to learn the graph position of a given commit so
that it can be used in `load_bloom_filter_from_graph()`. By replacing
the last steps of the above with one that records the graph position
into a temporary variable which is then used to load the existing Bloom
data, we eliminate the clobbering, removing the corruption.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When upgrading a commit-graph using generation v1 to one using
generation v2, it is possible to force Git into a corrupt state where it
(incorrectly) believes that a GDO2 chunk is necessary, *after* deciding
not to write one.
This makes subsequent reads using the commit-graph produce the following
error message:
fatal: commit-graph requires overflow generation data but has none
Demonstrate this bug by increasing our test coverage to include a
minimal example of upgrading a commit-graph from generation v1 to v2.
The only notable components of this test are:
- The committer date of the commit is chosen carefully so that the
offset underflows when computed using a v1 generation number, but
would not overflow when using v2 generation numbers.
- The upgrade to generation number v2 must read in the v1 generation
numbers, which we can do by passing `--changed-paths`, which will
force the commit-graph internals to call `fill_commit_graph_info()`.
A future patch will squash this bug.
Reported-by: Jeff King <peff@peff.net>
Reproduced-by: Will Chandler <wfc@wfchandler.org>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
