| Age | Commit message (Collapse) | Author |
|---|
|
Fix memory leaks in "test-tool regex" which have been there since
c91841594c2 (test-regex: Add a test to check for a bug in the regex
routines, 2012-09-01), as a result we can mark a test as passing with
SANITIZE=leak using "TEST_PASSES_SANITIZE_LEAK=true".
We could regfree() on the die() paths here, which would make some
invocations of valgrind(1) happy, but let's just target SANITIZE=leak
for now. Variables that are still reachable when we die() are not
reported as leaks.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check if git grep works around the PCRE2 big fixed by their e0c6029
(Fix inifinite loop when a single byte newline is searched in JIT.,
2020-05-29), which affects version 10.35 and earlier.
Searching for leading whitespace also triggers the endless loop.
Set a one-second alarm to abort in case we do get hit by the bug, to
avoid having to wait forever for the test result.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend a prerequisite check added in 5c1ebcca4d1 (grep/icase: avoid
kwsset on literal non-ascii strings, 2016-06-25) to do invoke
'test-tool regex' in such a way that we'll notice if it dies under
SANITIZE=leak due to having a memory leak, as opposed to us not having
the "ICASE" support we're checking for.
Because we weren't making a distinction between the two I'd marked
these tests as passing under SANITIZE=leak in 03d85e21951 (leak tests:
mark remaining leak-free tests as such, 2021-12-17).
Doing this is tricky. Ideally "test_lazy_prereq" would materialize as
a "real" test that we could check the exit code of with the same
signal matching that "test_must_fail" does.
However lazy prerequisites aren't real tests, and are instead lazily
materialized in the guts of "test_have_prereq" when we've already
started another test.
We could detect the abort() (or similar) there and pass that exit code
down, and fail the test that caused the prerequisites to be
materialized.
But that would require extensive changes to test-lib.sh and
test-lib-functions.sh. Let's instead simply check if the exit code of
"test-tool regex" is zero, and if so set the prerequisites. If it's
non-zero let's run it again with "test_must_fail". We'll thus make a
distinction between "bad" non-zero (segv etc) and "good" (exit 1 etc.).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
compile_pcre2_pattern() currently uses the option PCRE2_UTF only for
patterns with non-ASCII characters. Patterns with ASCII wildcards can
match non-ASCII strings, though. Without that option PCRE2 mishandles
UTF-8 input, though -- it matches parts of multi-byte characters. Fix
that by using PCRE2_UTF even for ASCII-only patterns.
This is a remake of the reverted ae39ba431a (grep/pcre2: fix an edge
case concerning ascii patterns and UTF-8 data, 2021-10-15). The change
to the condition and the test are simplified and more targeted.
Original-patch-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit ae39ba431ab861548eb60b4bd2e1d8b8813db76f, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we attempt to grep non-ascii log message text with an ascii pattern, we
run into the following issue:
$ git log --color --author='.var.*Bjar' -1 origin/master | grep ^Author
grep: (standard input): binary file matches
So, to fix this teach the grep code to use PCRE2_UTF, as long as the log
output is encoded in UTF-8.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in [1] when I originally added this test in [2] the test was
completely broken as it lacked a redirect[3]. I now think this whole
thing is overly fragile. Let's only test if we have a segfault here.
Before this the first test's "test_cmp" was pretty meaningless. We
were only testing if PCREv2 was so broken that it would spew out
something completely unrelated on stdout, which isn't very plausible.
In the second test we're relying on PCREv2 forever holding to the
current behavior of the PCRE_UTF8 flag, as opposed to learning some
optimistic graceful fallback to PCRE2_MATCH_INVALID_UTF in the
future. If that happens having this test broken under bisecting would
suck.
A follow-up commit will actually test this case in a meaningful way
under the PCRE2_MATCH_INVALID_UTF flag. Let's run this one
unconditionally, and just make sure we don't segfault.
1. e714b898c6 (t7812: expect failure for grep -i with invalid UTF-8
data, 2019-11-29)
2. 8a5999838e (grep: stess test PCRE v2 on invalid UTF-8 data,
2019-07-26)
3. c74b3cbb83 (t7812: add missing redirects, 2019-11-26)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the 'grep with invalid UTF-8 data' tests were added/adjusted in
8a5999838e (grep: stess test PCRE v2 on invalid UTF-8 data, 2019-07-26)
and 870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26) they lacked a redirect which caused them to falsely succeed
on most systems. The 'grep -i' test failed on systems where JIT was
disabled as it never reached the portion which was missing the redirect.
A recent patch added the missing redirect and exposed the fact that the
'PCRE v2: grep non-ASCII from invalid UTF-8 data with -i' test fails
regardless of whether JIT is enabled.
Based on the final paragraph in in 870eea8166:
When grepping a non-ASCII fixed string. This is a more general problem
that's hard to fix, but we can at least fix the most common case of
grepping for a fixed string without "-i". I can't think of a reason
for why we'd turn on PCRE2_UTF when matching byte-for-byte like that.
it seems that we don't expect that the case-insensitive grep will
succeed. Adjust the test to reflect that expectation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Two tests in t7812, added in 8a599983 ("grep: stess test PCRE v2 on
invalid UTF-8 data", 2019-07-26), were missing redirects, failing to
actually test the produced output.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As discussed in the last commit partially fix a bug introduced in
b65abcafc7 ("grep: use PCRE v2 for optimized fixed-string search",
2019-07-01). Because PCRE v2, unlike kwset, validates its UTF-8 input
we'd die on e.g.:
fatal: pcre2_match failed with error code -22: UTF-8 error:
isolated byte with 0x80 bit set
When grepping a non-ASCII fixed string. This is a more general problem
that's hard to fix, but we can at least fix the most common case of
grepping for a fixed string without "-i". I can't think of a reason
for why we'd turn on PCRE2_UTF when matching byte-for-byte like that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since my b65abcafc7 ("grep: use PCRE v2 for optimized fixed-string
search", 2019-07-01) we've been dying on invalid UTF-8 data when
grepping for fixed strings if the following are all true:
* The subject string is non-ASCII (e.g. "ævar")
* We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
* We compiled with PCRE v2
* That PCRE v2 did not have JIT support
The last of those is why this wasn't caught earlier, per pcre2jit(3):
"unless PCRE2_NO_UTF_CHECK is set, a UTF subject string is tested
for validity. In the interests of speed, these checks do not
happen on the JIT fast path, and if invalid data is passed, the
result is undefined."
I.e. the subject being matched against our pattern was invalid, but we
were lucky and getting away with it on the JIT path, but the non-JIT
one is stricter.
This patch does nothing to fix that, instead we sneak in support for
fixed patterns starting with "(*NO_JIT)", this disables the PCRE v2
jit with implicit fixed-string matching for testing, see
pcre2syntax(3) the syntax.
This is technically a change in behavior, but it's so obscure that I
figured it was OK. We'd previously consider this an invalid regular
expression as regcomp() would die on it, now we feed it to the PCRE v2
fixed-string path. I thought this was better than introducing yet
another GIT_TEST_* environment variable.
We're also relying on a behavior of PCRE v2 that technically could
change, but I think the test coverage is worth dipping our toe into
some somewhat undefined behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a non-ASCII case-insensitive test case to stop using --debug,
and instead simply test for the expected results.
The test coverage remains the same with this change, but the test
won't break due to internal refactoring.
This test was added in commit 793dc676e0 ("grep/icase: avoid kwsset
when -F is specified", 2016-06-25). It was asserting that the regex
must be compiled with compile_fixed_regexp(), instead test for the
expected results, allowing the underlying implementation to change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the LIBPCRE prerequisite to PCRE. This is for preparation for
libpcre2 support, where having just "LIBPCRE" would be confusing as it
implies v1 of the library.
None of these tests are incompatible between versions 1 & 2 of
libpcre, it's less confusing to give them a more general name to make
it clear that they work on both library versions.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
