summaryrefslogtreecommitdiff
path: root/t/t4006-diff-mode.sh
AgeCommit message (Collapse)Author
2021-11-01leak tests: mark some diff tests as passing with SANITIZE=leakÆvar Arnfjörð Bjarmason
Mark some tests that match "*diff*" as passing when git is compiled with SANITIZE=leak. They'll now be listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI target). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-05-11test-lib functions: add --printf option to test_commitÆvar Arnfjörð Bjarmason
Add a --printf option to test_commit to allow writing to the file with "printf" instead of "echo". This is useful for writing "\n", "\0" etc., in particular in combination with the --append option added in 3373518cc8 (test-lib functions: add an --append option to test_commit, 2021-01-12). I'm converting a few tests to use the new option rather than a manual printf/add/commit combination to demonstrate its usefulness. While I'm at it use "test_create_repo" where appropriate, and give the first/second commit a meaningful/more conventional log message in cases where no test cared about that message. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-11tests: remove most uses of test_i18ncmpÆvar Arnfjörð Bjarmason
As a follow-up to d162b25f956 (tests: remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp via a simple s/test_i18ncmp/test_cmp/g search-replacement. I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight changes between "master" and "seen", as well as the prerequisite itself due to other changes between "master" and "next/seen" which add new test_i18ncmp uses. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-24t4006: resurrect commented-out testsJeff King
This set of tests was added by 4434e6ba6c (tests: check --[short]stat output after chmod, 2012-05-01), and is primarily about the handling of binary versus text files. Later, 74faaa16f0 (Fix "git diff --stat" for interesting - but empty - file changes, 2012-10-17) changed the stat output so that the empty text file is mentioned rather than omitted. That commit just comments out these tests. There's no discussion in the commit message, but the original email[1] says: NOTE! This does break two of our tests, so we clearly did this on purpose, or at least tested for it. I just uncommented the subtests that this makes irrelevant, and changed the output of another one. I don't think they're irrelevant, though. We should be testing this "mode change only" case and making sure that it has the post-74faaa16f0 behavior. So this commit brings back those tests, with the current expected output. [1] https://public-inbox.org/git/CA+55aFz88GPJcfMSqiyY+u0Cdm48bEyrsTGxHVJbGsYsDg=Q5w@mail.gmail.com/ Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14t: switch $_x40 to $OID_REGEXbrian m. carlson
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with larger hashes. This commit was created by using the following sed command to modify all files in the t directory except t/test-lib.sh: sed -i 's/\$_x40/$OID_REGEX/g' Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-30t4006-diff-mode.sh: use the $( ... ) construct for command substitutionElia Pinto
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-17Fix "git diff --stat" for interesting - but empty - file changesLinus Torvalds
The behavior of "git diff --stat" is rather odd for files that have zero lines of changes: it will discount them entirely unless they were renames. Which means that the stat output will simply not show files that only had "other" changes: they were created or deleted, or their mode was changed. Now, those changes do show up in the summary, but so do renames, so the diffstat logic is inconsistent. Why does it show renames with zero lines changed, but not mode changes or added files with zero lines changed? So change the logic to not check for "is_renamed", but for "is_interesting" instead, where "interesting" is judged to be any action but a pure data change (because a pure data change with zero data changed really isn't worth showing, if we ever get one in our diffpairs). So if you did chmod +x Makefile git diff --stat before, it would show empty (" 0 files changed"), with this it shows Makefile | 0 1 file changed, 0 insertions(+), 0 deletions(-) which I think is a more correct diffstat (and then with "--summary" it shows *what* the metadata change to Makefile was - this is completely consistent with our handling of renamed files). Side note: the old behavior was *really* odd. With no changes at all, "git diff --stat" output was empty. With just a chmod, it said "0 files changed". No way is our legacy behavior sane. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27Fix tests under GETTEXT_POISON on diffstatJiang Xin
Use the i18n-specific test functions in test scripts for diffstat. This issue was was introduced in v1.7.9-1-g7f814: 7f814 Use correct grammar in diffstat summary line and been broken under GETTEXT_POISON=YesPlease since. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-02t4006: Windows do not have /dev/zeroJohannes Sixt
We only need to have a file with _some_ binary contents; be nice to our Windows friends and avoid using /dev/zero Signed-off-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-02diff --stat: report mode-only changes for binary files like text filesZbigniew Jędrzejewski-Szmek
Mode-only changes to binary files without content change were reported as if they were rewritten, but text files in the same situation were reported as "unchanged". Let's treat binary files like text files here, and simply say that they are unchanged. Output of --shortstat is modified in the same way. Reported-by: Martin Mareš <mj@ucw.cz> Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01tests: check --[short]stat output after chmodZbigniew Jędrzejewski-Szmek
Add a test to check 'diff --stat' output with a text file after chmod, and the same for a binary file. This demonstrates that text and binary files are treated differently, which can be misleading. While at it, add tests to check --shortstat output, too. Reported-by: Martin Mareš <mj@ucw.cz> Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01test: modernize style of t4006Zbigniew Jędrzejewski-Szmek
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-04tests: move convenience regexp to match object names to test-lib.shJunio C Hamano
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-19test-lib: Introduce test_chmod and use it instead of update-index --chmodJohannes Sixt
This function replaces sequences of 'chmod +x' and 'git update-index --chmod=+x' in the test suite, whose purpose is to help filesystems that need core.filemode=false. Two places where only 'chmod +x' was used we also use this new function. The function calls 'git update-index --chmod' without checking core.filemode (unlike some of the call sites did). We do this because the call sites *expect* that the executable bit ends up in the index (ie. it is not the purpose of the call sites to *test* whether git treats 'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on filesystems with core.filemode=true the 'git update-index --chmod' is a no-op. The function uses --add with update-index to help one call site in t6031-merge-recursive. It makes no difference for the other callers. Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2008-05-24tests: do not use implicit "git diff --no-index"Junio C Hamano
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-03Rewrite "git-frotz" to "git frotz"Junio C Hamano
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceJunio C Hamano
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-03-04Get rid of the dependency to GNU diff in the testsJohannes Schindelin
Now that "git diff" handles stdin and relative paths outside the working tree correctly, we can convert all instances of "diff -u" to "git diff". This commit is really the result of $ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2007-01-29[PATCH] Rename git-repo-config to git-config.Tom Prince
Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-06trivial: use git-repo-config to detect how to run tests in the test repositoryAlex Riesen
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-08Big tool rename.Junio C Hamano
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-26Adjust diff-raw tests to the status letter change.Junio C Hamano
We use 'A' for added files instead of 'N' to make the it visually easier to distinguish from 'M' now. While we are at it, make the test scripts executable. Yes, I know it does not matter because t/Makefile runs them explicitly with "sh tXXXX-blah.sh", but being consistent is always better. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-05-25[PATCH] Mode only changes from diff.Junio C Hamano
This fixes another bug. - Mode-only changes were pruned incorrectly from the output. - Added test to catch the above problem. - Normalize rename/copy similarity score in the diff-raw output to per-cent, no matter what scale we internally use. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>