| Age | Commit message (Collapse) | Author |
|---|
|
The "prefix" was precomposed for macOS in commit 5c327502 (MacOS:
precompose_argv_prefix(), 2021-02-03).
However, this commit forgot to update "startup_info->prefix" after
precomposing.
Move the (possible) precomposition towards the end of
setup_git_directory_gently(), so that precompose_string_if_needed()
can use git_config_get_bool("core.precomposeunicode") correctly.
Keep prefix, startup_info->prefix and GIT_PREFIX_ENVIRONMENT all in sync.
And as a result, the prefix no longer needs to be precomposed in git.c
Reported-by: Dmitry Torilov <d.torilov@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
|
|
The transition plan specifies extensions.objectFormat as the indication
that we're using a given hash in a certain repo. Read this as one of
the extensions we support. If the user has specified an invalid value,
fail.
Ensure that we reject the extension if the repository format version is
0.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2.28-rc0, we corrected a bug that some repository extensions are
honored by mistake even in a version 0 repositories (these
configuration variables in extensions.* namespace were supposed to
have special meaning in repositories whose version numbers are 1 or
higher), but this was a bit too big a change.
* jn/v0-with-extensions-fix:
repository: allow repository format upgrade with extensions
Revert "check_repository_format_gently(): refuse extensions for old repositories"
|
|
We made the mistake in the past of respecting extensions.* even when the
repository format version was set to 0. This is bad because forgetting
to bump the repository version means that older versions of Git (which
do not know about our extensions) won't complain. I.e., it's not a
problem in itself, but it means your repository is in a state which does
not give you the protection you think you're getting from older
versions.
For compatibility reasons, we are stuck with that decision for existing
extensions. However, we'd prefer not to extend the damage further. We
can do that by catching any newly-added extensions and complaining about
the repository format.
Note that this is a pretty heavy hammer: we'll refuse to work with the
repository at all. A lesser option would be to ignore (possibly with a
warning) any new extensions. But because of the way the extensions are
handled, that puts the burden on each new extension that is added to
remember to "undo" itself (because they are handled before we know
for sure whether we are in a v1 repo or not, since we don't insist on a
particular ordering of config entries).
So one option would be to rewrite that handling to record any new
extensions (and their values) during the config parse, and then only
after proceed to handle new ones only if we're in a v1 repository. But
I'm not sure if it's worth the trouble:
- ignoring extensions is likely to end up with broken results anyway
(e.g., ignoring a proposed objectformat extension means parsing any
object data is likely to encounter errors)
- this is a sign that whatever tool wrote the extension field is
broken. We may be better off notifying immediately and forcefully so
that such tools don't even appear to work accidentally.
The only downside is that fixing the situation is a little tricky,
because programs like "git config" won't want to work with the
repository. But:
git config --file=.git/config core.repositoryformatversion 1
should still suffice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we officially permit repository extensions in repository
format v0, permit upgrading a repository with extensions from v0 to v1
as well.
For example, this means a repository where the user has set
"extensions.preciousObjects" can use "git fetch --filter=blob:none
origin" to upgrade the repository to use v1 and the partial clone
extension.
To avoid mistakes, continue to forbid repository format upgrades in v0
repositories with an unrecognized extension. This way, a v0 user
using a misspelled extension field gets a chance to correct the
mistake before updating to the less forgiving v1 format.
While we're here, make the error message for failure to upgrade the
repository format a bit shorter, and present it as an error, not a
warning.
Reported-by: Huan Huan Chen <huanhuanchen@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
repositories"
This reverts commit 14c7fa269e42df4133edd9ae7763b678ed6594cd.
The core.repositoryFormatVersion field was introduced in ab9cb76f661
(Repository format version check., 2005-11-25), providing a welcome
bit of forward compatibility, thanks to some welcome analysis by
Martin Atukunda. The semantics are simple: a repository with
core.repositoryFormatVersion set to 0 should be comprehensible by all
Git implementations in active use; and Git implementations should
error out early instead of trying to act on Git repositories with
higher core.repositoryFormatVersion values representing new formats
that they do not understand.
A new repository format did not need to be defined until 00a09d57eb8
(introduce "extensions" form of core.repositoryformatversion,
2015-06-23). This provided a finer-grained extension mechanism for
Git repositories. In a repository with core.repositoryFormatVersion
set to 1, Git implementations can act on "extensions.*" settings that
modify how a repository is interpreted. In repository format version
1, unrecognized extensions settings cause Git to error out.
What happens if a user sets an extension setting but forgets to
increase the repository format version to 1? The extension settings
were still recognized in that case; worse, unrecognized extensions
settings do *not* cause Git to error out. So combining repository
format version 0 with extensions settings produces in some sense the
worst of both worlds.
To improve that situation, since 14c7fa269e4
(check_repository_format_gently(): refuse extensions for old
repositories, 2020-06-05) Git instead ignores extensions in v0 mode.
This way, v0 repositories get the historical (pre-2015) behavior and
maintain compatibility with Git implementations that do not know about
the v1 format. Unfortunately, users had been using this sort of
configuration and this behavior change came to many as a surprise:
- users of "git config --worktree" that had followed its advice
to enable extensions.worktreeConfig (without also increasing the
repository format version) would find their worktree configuration
no longer taking effect
- tools such as copybara[*] that had set extensions.partialClone in
existing repositories (without also increasing the repository format
version) would find that setting no longer taking effect
The behavior introduced in 14c7fa269e4 might be a good behavior if we
were traveling back in time to 2015, but we're far too late. For some
reason I thought that it was what had been originally implemented and
that it had regressed. Apologies for not doing my research when
14c7fa269e4 was under development.
Let's return to the behavior we've had since 2015: always act on
extensions.* settings, regardless of repository format version. While
we're here, include some tests to describe the effect on the "upgrade
repository version" code path.
[*] https://github.com/google/copybara/commit/ca76c0b1e13c4e36448d12c2aba4a5d9d98fb6e7
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
Previously, extensions were recognized regardless of repository format
version. If the user sets an undefined "extensions" value on a
repository of version 0 and that value is used by a future git version,
they might get an undesired result.
Because all extensions now also upgrade repository versions, tightening
the check would help avoid this for future extensions.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In version 1 of repository format, "extensions" gained special meaning
and it is safer to avoid upgrading when there are pre-existing
extensions.
Make list-objects-filter to use the helper function instead of setting
repository version directly as a prerequisite of exposing the upgrade
capability.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're checking the repository's format, set the hash algorithm at
the same time. This ensures that we perform a suitable initialization
early enough to avoid confusing any parts of the code. If we defer
until later, we can end up with portions of the code which are confused
about the hash algorithm, resulting in segfaults when working with
SHA-256 repositories.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
|
|
The real_path() convenience function can easily be misused; with a
bit of code refactoring in the callers' side, its use has been
eliminated.
* am/real-path-fix:
get_superproject_working_tree(): return strbuf
real_path_if_valid(): remove unsafe API
real_path: remove unsafe API
set_git_dir: fix crash when used with real_path()
|
|
An earlier update to show the location of working tree in the error
message did not consider the possibility that a git command may be
run in a bare repository, which has been corrected.
* es/outside-repo-errmsg-hints:
prefix_path: show gitdir if worktree unavailable
|
|
If there is no worktree at present, we can still hint the user about
Git's current directory by showing them the absolute path to the Git
directory. Even though the Git directory doesn't make it as easy to
locate the worktree in question, it can still help a user figure out
what's going on while developing a script.
This fixes a segmentation fault introduced in e0020b2f
("prefix_path: show gitdir when arg is outside repo", 2020-02-14).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
[jc: added minimum tests, with help from Szeder Gábor]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit continues the work started with previous commit.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`real_path()` returns result from a shared buffer, inviting subtle
reentrance bugs. One of these bugs occur when invoked this way:
set_git_dir(real_path(git_dir))
In this case, `real_path()` has reentrance:
real_path
read_gitfile_gently
repo_set_gitdir
setup_git_env
set_git_dir_1
set_git_dir
Later, `set_git_dir()` uses its now-dead parameter:
!is_absolute_path(path)
Fix this by using a dedicated `strbuf` to hold `strbuf_realpath()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Error message clarification.
* es/outside-repo-errmsg-hints:
prefix_path: show gitdir when arg is outside repo
|
|
When developing a script, it can be painful to understand why Git thinks
something is outside the current repo, if the current repo isn't what
the user thinks it is. Since this can be tricky to diagnose, especially
in cases like submodules or nested worktrees, let's give the user a hint
about which repository is offended about that path.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 28fcc0b71a (pathspec: avoid the need of "--" when wildcard is
used, 2015-05-02) allowed:
git rev-parse '*.c'
without the double-dash. But the rule it uses to check for wildcards
actually looks for any glob special. This is overly liberal, as it means
that a pattern that doesn't actually do any wildcard matching, like
"a\b", will be considered a pathspec.
If you do have such a file on disk, that's presumably what you wanted.
But if you don't, the results are confusing: rather than say "there's no
such path a\b", we'll quietly accept it as a pathspec which very likely
matches nothing (or at least not what you intended). Likewise, looking
for path "a\*b" doesn't expand the search at all; it would only find a
single entry, "a*b".
This commit switches the rule to trigger only when glob metacharacters
would expand the search, meaning both of those cases will now report an
error (you can still disambiguate using "--", of course; we're just
tightening the DWIM heuristic).
Note that we didn't test the original feature in 28fcc0b71a at all. So
this patch not only tests for these corner cases, but also adds a
regression test for the existing behavior.
Reported-by: David Burström <davidburstrom@spotify.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, the root level of UNC share is now allowed to be used
just like any other directory.
* js/gitdir-at-unc-root:
setup_git_directory(): handle UNC root paths correctly
Fix .git/ discovery at the root of UNC shares
setup_git_directory(): handle UNC paths correctly
|
|
When working in the root directory of a file share (this is only
possible in Git Bash and Powershell, but not in CMD), the current
directory is reported without a trailing slash.
This is different from Unix and standard Windows directories: both / and
C:\ are reported with a trailing slash as current directories.
If a Git worktree is located there, Git is not quite prepared for that:
while it does manage to find the .git directory/file, it returns as
length of the top-level directory's path *one more* than the length of
the current directory, and setup_git_directory_gently() would then
return an undefined string as prefix.
In practice, this undefined string usually points to NUL bytes, and does
not cause much harm. Under rare circumstances that are really involved
to reproduce (and not reliably so), the reported prefix could be a
suffix string of Git's exec path, though.
A careful analysis determined that this bug is unlikely to be
exploitable, therefore we mark this as a regular bug fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A very common assumption in Git's source code base is that
offset_1st_component() returns either 0 for relative paths, or 1 for
absolute paths that start with a slash. In other words, the return value
is either 0 or points just after the dir separator.
This assumption is not fulfilled when calling offset_1st_component()
e.g. on UNC paths on Windows, e.g. "//my-server/my-share". In this case,
offset_1st_component() returns the length of the entire string (which is
correct, because stripping the last "component" would not result in a
valid directory), yet the return value still does not point just after a
dir separator.
This assumption is most prominently seen in the
setup_git_directory_gently_1() function, where we want to append a
".git" component and simply assume that there is already a dir
separator. In the UNC example given above, this assumption is incorrect.
As a consequence, Git will fail to handle a worktree at the top of a UNC
share correctly.
Let's fix this by adding a dir separator specifically for that case: we
found that there is no first component in the path and it does not end
in a dir separator? Then add it.
This fixes https://github.com/git-for-windows/git/issues/1320
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first offset in a UNC path is not the host name, but the folder name after that.
This fixes https://github.com/git-for-windows/git/issues/1181
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup code has been cleaned up to avoid leaks around the
repository_format structure.
* ma/clear-repository-format:
setup: fix memory leaks with `struct repository_format`
setup: free old value before setting `work_tree`
|
|
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.
Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.
Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.
Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)
We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On a case-insensitive filesystem, we failed to compare the part of
the path that is above the worktree directory in an absolute
pathname, which has been corrected.
* js/abspath-part-inside-repo:
abspath_part_inside_repo: respect core.ignoreCase
|
|
Before assigning to `data->work_tree` in `read_worktree_config()`, free
any value we might already have picked up, so that we do not leak it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the file system is case-insensitive, we really must be careful to
ignore differences in case only.
This fixes https://github.com/git-for-windows/git/issues/735
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_git_directory_gently() expects two types of failures to
discover a git directory (e.g. .git/):
- GIT_DIR_HIT_CEILING: could not find a git directory in any
parent directories of the cwd.
- GIT_DIR_HIT_MOUNT_POINT: could not find a git directory in
any parent directories up to the mount point of the cwd.
Both cases are handled in a similar way, but there are misleading
and unimportant differences. In both cases, setup_git_directory_gently()
should:
- Die if we are not in a git repository. Otherwise:
- Set nongit_ok = 1, indicating that we are not in a git repository
but this is ok.
- Call strbuf_release() on any non-static struct strbufs that we
allocated.
Before this change are two misleading additional behaviors:
- GIT_DIR_HIT_CEILING: setup_nongit() changes to the cwd for no
apparent reason. We never had the chance to change directories
up to this point so chdir(current cwd) is pointless.
- GIT_DIR_HIT_MOUNT_POINT: strbuf_release() frees the buffer
of a static struct strbuf (cwd). This is unnecessary because the
struct is static so its buffer is always reachable. This is also
misleading because nowhere else in the function is this buffer
released.
This change eliminates these two misleading additional behaviors and
deletes setup_nogit() because the code is clearer without it. The
result is that we can see clearly that GIT_DIR_HIT_CEILING and
GIT_DIR_HIT_MOUNT_POINT lead to the same behavior (ignoring the
different help messages).
During review, this change was amended to additionally include:
- Neither GIT_DIR_HIT_CEILING nor GIT_DIR_HIT_MOUNT_POINT may
return early from setup_git_directory_gently() before the
GIT_PREFIX environment variable is reset. Change both cases to
break instead of return. See GIT_PREFIX below for more details.
- GIT_DIR_NONE: setup_git_directory_gently_1() never returns this
value, but if it ever did, setup_git_directory_gently() would
incorrectly record that it had found a repository. Explicitly
BUG on this case because it is underspecified.
- GIT_PREFIX: this environment variable must always match the
value of startup_info->prefix and the prefix returned from
setup_git_directory_gently(). Make how we handle this slightly
more repetitive but also more clear.
- setup_git_env() and repo_set_hash_algo(): Add comments showing
that only GIT_DIR_EXPLICIT, GIT_DIR_DISCOVERED, and GIT_DIR_BARE
will cause setup_git_directory_gently() to call these setup
functions. This was obvious (but partly incorrect) before this
change when GIT_DIR_HIT_MOUNT_POINT returned early from
setup_git_directory_gently().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new repo extension is added, worktreeConfig. When it is present:
- Repository config reading by default includes $GIT_DIR/config _and_
$GIT_DIR/config.worktree. "config" file remains shared in multiple
worktree setup.
- The special treatment for core.bare and core.worktree, to stay
effective only in main worktree, is gone. These config settings are
supposed to be in config.worktree.
This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).
This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).
"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).
Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".
This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.
(*) "git config --worktree" points back to "config" file when this
extension is not present and there is only one worktree so that it
works in any both single and multiple worktree setups.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths, including the refs API, get and keep relative
paths, that go out of sync when the process does chdir(2). The
chdir-notify API is introduced to let these codepaths adjust these
cached paths to the new current directory.
* jk/relative-directory-fix:
refs: use chdir_notify to update cached relative paths
set_work_tree: use chdir_notify
add chdir-notify API
trace.c: export trace_setup_key
set_git_dir: die when setenv() fails
|
|
Code clean-up for the "repository" abstraction.
* nd/remove-ignore-env-field:
repository.h: add comment and clarify repo_set_gitdir
repository: delete ignore_env member
sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
repository.c: delete dead functions
repository.c: move env-related setup code back to environment.c
repository: initialize the_repository in main()
|
|
When we change to the top of the working tree, we manually
re-adjust $GIT_DIR and call set_git_dir() again, in order to
update any relative git-dir we'd compute earlier.
Instead of the work-tree code having to know to call the
git-dir code, let's use the new chdir_notify interface.
There are two spots that need updating, with a few
subtleties in each:
1. the set_git_dir() code needs to chdir_notify_register()
so it can be told when to update its path.
Technically we could push this down into repo_set_gitdir(),
so that even repository structs besides the_repository
could benefit from this. But that opens up a lot of
complications:
- we'd still need to touch set_git_dir(), because it
does some other setup (like setting $GIT_DIR in the
environment)
- submodules using other repository structs get
cleaned up, which means we'd need to remove them
from the chdir_notify list
- it's unlikely to fix any bugs, since we shouldn't
generally chdir() in the middle of working on a
submodule
2. setup_work_tree now needs to call chdir_notify(), and
can lose its manual set_git_dir() call.
Note that at first glance it looks like this undoes the
absolute-to-relative optimization added by 044bbbcb63
(Make git_dir a path relative to work_tree in
setup_work_tree(), 2008-06-19). But for the most part
that optimization was just _undoing_ the
relative-to-absolute conversion which the function was
doing earlier (and which is now gone).
It is true that if you already have an absolute git_dir
that the setup_work_tree() function will no longer make
it relative as a side effect. But:
- we generally do have relative git-dir's due to the
way the discovery code works
- if we really care about making git-dir's relative
when possible, then we should be relativizing them
earlier (e.g., when we see an absolute $GIT_DIR we
could turn it relative, whether we are going to
chdir into a worktree or not). That would cover all
cases, including ones that 044bbbcb63 did not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make sense that generic repository code contains handling
of environment variables, which are specific for the main repository
only. Refactor repo_set_gitdir() function to take $GIT_DIR and
optionally _all_ other customizable paths. These optional paths can be
NULL and will be calculated according to the default directory layout.
Note that some dead functions are left behind to reduce diff
noise. They will be deleted in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some messages in low level start-up codepath have been i18n-ized.
* as/ll-i18n:
Mark messages for translations
|
|
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
|
|
Small changes in messages to fit the style and typography of rest.
Reuse already translated messages if possible.
Do not translate messages aimed at developers of git.
Fix unit tests depending on the original string.
Use `test_i18ngrep` for tests with translatable strings.
Change and verify rest of tests via `make GETTEXT_POISON=1 test`.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comment update.
* sg/setup-doc-update:
setup.c: fix comment about order of .git directory discovery
|
|
Since gitfiles were introduced in b44ebb19e (Add platform-independent
.git "symlink", 2008-02-20) the order of checks during .git directory
discovery is: gitfile, gitdir, bare repo. However, that commit did
only partially update the in-code comment describing this order,
missing the last line which still puts gitdir before gitfile.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce new repository extension option:
`extensions.partialclone`
See the update to Documentation/technical/repository-version.txt
in this patch for more information.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In future versions of Git, we plan to support an additional hash
algorithm. Integrate the enumeration of hash algorithms with repository
setup, and store a pointer to the enumerated data in struct repository.
Of course, we currently only support SHA-1, so hard-code this value in
read_repository_format. In the future, we'll enumerate this value from
the configuration.
Add a constant, the_hash_algo, which points to the hash_algo structure
pointer in the repository global. Note that this is the hash which is
used to serialize data to disk, not the hash which is used to display
items to the user. The transition plan anticipates that these may be
different. We can add an additional element in the future (say,
ui_hash_algo) to provide for this case.
Include repository.h in cache.h since we now need to have access to
these struct and variable definitions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We enumerate several different items as part of struct
repository_format, but then actually set up those values using the
global variables we've initialized from them. Instead, let's pass a
pointer to the structure down to the code where we enumerate these
values, so we can later on use those values directly to perform setup.
This technique makes it easier for us to determine additional items
about the repository format (such as the hash algorithm) and then use
them for setup later on, without needing to add additional global
variables. We can't avoid using the existing global variables since
they're intricately intertwined with how things work at the moment, but
this improves things for the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct start-up sequence so that a repository could be placed
immediately under the root directory again (which was broken at
around Git 2.13).
* js/early-config:
setup: avoid double slashes when looking for HEAD
|
