| Age | Commit message (Collapse) | Author |
|---|
|
* maint:
revision traversal and pack: notice and die on missing commit
|
|
* maint-1.5.6:
revision traversal and pack: notice and die on missing commit
|
|
* maint-1.5.5:
revision traversal and pack: notice and die on missing commit
Conflicts:
revision.c
|
|
* maint-1.5.4:
revision traversal and pack: notice and die on missing commit
|
|
cc0e6c5 (Handle return code of parse_commit in revision machinery,
2007-05-04) attempted to tighten error checking in the revision machinery,
but it wasn't enough. When get_revision_1() was asked for the next commit
to return, it tries to read and simplify the parents of the commit to be
returned, but an error while doing so was silently ignored and reported as
a truncated history to the caller instead.
This resulted in an early end of "git log" output or a pack that lacks
older commits from "git pack-objects", without any error indication in the
exit status from these commands, even though the underlying parse_commit()
issues an error message to the end user.
Note that the codepath in add_parents_list() that paints parents of an
UNINTERESTING commit UNINTERESTING silently ignores the error when
parse_commit() fails; this is deliberate and in line with aeeae1b
(revision traversal: allow UNINTERESTING objects to be missing,
2009-01-27).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
* jc/maint-allow-uninteresting-missing:
revision traversal: allow UNINTERESTING objects to be missing
|
|
Most of the existing codepaths were meant to treat missing uninteresting
objects to be a silently ignored non-error, but there were a few places
in handle_commit() and add_parents_to_list(), which are two key functions
in the revision traversal machinery, that cared:
- When a tag refers to an object that we do not have, we barfed. We
ignore such a tag if it is painted as UNINTERESTING with this change.
- When digging deeper into the ancestry chain of a commit that is already
painted as UNINTERESTING, in order to paint its parents UNINTERESTING,
we barfed if parse_parent() for a parent commit object failed. We can
ignore such a parent commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-all-implies-HEAD:
bundle: allow the same ref to be given more than once
revision walker: include a detached HEAD in --all
|
|
When HEAD is detached, --all should list it, too, logically, as a
detached HEAD is by definition a temporary, unnamed branch.
It is especially necessary to list it when garbage collecting, as
the detached HEAD would be trashed.
Noticed by Thomas Rast.
Note that this affects creating bundles with --all; I contend that it
is a good change to add the HEAD, so that cloning from such a bundle
will give you a current branch. However, I had to fix t5701 as it
assumed that --all does not imply HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Documentation: git-svn: fix example for centralized SVN clone
Documentation: fix links to "everyday.html"
revision.c: use proper data type in call to sizeof() within xrealloc
|
|
A type char** was being used instead of char*.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this, you can simplify history not by the contents of the tree, but
whether a commit has been named (ie it's referred to by some branch or
tag) or not.
This makes it possible to see the relationship between different named
commits, without actually seeing any of the details.
When used with pathspec, you would get the usual view that is limited to
the commits that change the contents of the tree plus commits that are
named.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will make it easier to do various clever things that don't depend
on the pure tree contents. It also makes the parameter passing much
simpler - the callers doesn't really look at trees anywhere else, and
it's really the function that should look at the low-level details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support decorating commits by tags or branches that point to
them, but especially when we are looking at multiple branches together,
we sometimes want to see _how_ we reached a particular commit.
We can abuse the '->util' field in the commit to keep track of that as
we walk the commit lists, and get a reasonably useful view into which
branch or tag first reaches that commit.
Of course, if the commit is reachable through multiple sources (which is
common), our particular choice of "first" reachable is entirely random
and depends on the particular path we happened to follow.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/rev-list-reverse:
t6013: replace use of 'tac' with equivalent Perl
rev-list: fix --reverse interaction with --parents
|
|
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
|
|
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
|
|
--reverse did not interact well with --parents, as the included test
case shows: in a history like
A--B.
\ \
`C--M--D
the command
git rev-list --reverse --parents --full-history HEAD
erroneously lists D as having no parents at all. (Without --reverse,
it correctly lists M.)
This is caused by the machinery driving --reverse: it first grabs all
commits through the normal routines, then runs them through the same
routines again, effectively simplifying them twice.
Fix this by moving the --reverse one level up, into get_revision().
This way we can cleanly grab all commits via the normal calls, then
just pop them off the list one by one without interfering with
get_revision_internal().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This has been broken in v1.6.0 due to the reorganization of
the revision option parsing code. The "-i" is completely
ignored, but works fine in "git log --grep -i".
What happens is that the code for "-i" looks for
revs->grep_filter; if it is NULL, we do nothing, since there
are no grep filters. But that is obviously not correct,
since we want it to influence the later --grep option. Doing
it the other way around works, since "-i" just impacts the
existing grep_filter option.
Instead, we now always initialize the grep_filter member and
just fill in options and patterns as we get them. This means
that we can no longer check grep_filter for NULL, but
instead must check the pattern list to see if we have any
actual patterns.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are not pruning there is no reason to run the merge
simplification.
Also avoid running topo-order sort twice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we still do not know how parents of a commit simplify to, we should
defer processing of the commit, not discard it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The users of revision walking machinery may want to use the util pointer
for their own use. Use decoration to hold the data needed during merge
simplification instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ag/rewrite_one:
Fix quadratic performance in rewrite_one.
|
|
This makes the algorithm more honest about what it is doing.
We start from an already limited, topo-sorted list, and postprocess
it by simplifying the irrelevant merges away.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --full-history traversal keeps all merges in addition to non-merge
commits that touch paths in the given pathspec. This is useful to view
both sides of a merge in a topology like this:
A---M---o
/ /
---O---B
even when A and B makes identical change to the given paths. The revision
traversal without --full-history aims to come up with the simplest history
to explain the final state of the tree, and one of the side branches can
be pruned away.
The behaviour to keep all merges however is inconvenient if neither A nor
B touches the paths we are interested in. --full-history reduces the
topology to:
---O---M---o
in such a case, without removing M.
This adds a post processing phase on top of --full-history traversal to
remove needless merges from the resulting history.
The idea is to compute, for each commit in the "full history" result set,
the commit that should replace it in the simplified history. The commit
to replace it in the final history is determined as follows:
* In any case, we first figure out the replacement commits of parents of
the commit we are looking at. The commit we are looking at is
rewritten as if the replacement commits of its original parents are its
parents. While doing so, we reduce the redundant parents from the
rewritten parent list by not just removing the identical ones, but also
removing a parent that is an ancestor of another parent.
* After the above parent simplification, if the commit is a root commit,
an UNINTERESTING commit, a merge commit, or modifies the paths we are
interested in, then the replacement commit of the commit is itself. In
other words, such a commit is not dropped from the final result.
The first point above essentially means that the history is rewritten in
the bottom up direction. We can rewrite the parent list of a commit only
after we know how all of its parents are rewritten. This means that the
processing needs to happen on the full history (i.e. after limit_list()).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commands which use parse_options() but also call setup_revisions()
must do their parsing in a two step process:
1. first, they parse all options. Anything unknown goes to
parse_revision_opt() (which calls handle_revision_opt), which
may claim the option or say "I don't recognize this"
2. the non-option remainder goes to setup_revisions() to
actually get turned into revisions
Some revision options are "non-options" in that they must be
parsed in order with their revision counterparts in
setup_revisions(). For example, "--all" functions as a
pseudo-option expanding to all refs, and "--no-walk" affects refs
after it on the command line, but not before. The revision option
parser in step 1 recognizes such options and sets them aside for
later parsing by setup_revisions().
However, the return value used from handle_revision_opt indicated
"I didn't recognize this", which was wrong. It did, and it took
appropriate action (even though that action was just deferring it
for later parsing). Thus it should return "yes, I recognized
this."
Previously, these pseudo-options generated an error when used with
parse_options parsers (currently just blame and shortlog). With
this patch, they should work fine, enabling things like "git
shortlog --all".
Signed-off-by: Jeff King <peff@peff.net>
Acked-By: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
|
|
If PATH_MAX on your system is smaller than a path stored, it may cause
buffer overflow and stack corruption in diff_addremove() and diff_change()
functions when running git-diff
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ag/rewrite_one:
Fix quadratic performance in rewrite_one.
|
|
* ph/parseopt-step-blame:
revisions: refactor handle_revision_opt into parse_revision_opt.
git-shortlog: migrate to parse-options partially.
git-blame: fix lapsus
git-blame: migrate to incremental parse-option [2/2]
git-blame: migrate to incremental parse-option [1/2]
revisions: split handle_revision_opt() from setup_revisions()
parse-opt: add PARSE_OPT_KEEP_ARGV0 parser option.
parse-opt: fake short strings for callers to believe in.
parse-opt: do not print errors on unknown options, return -2 intead.
parse-opt: create parse_options_step.
parse-opt: Export a non NORETURN usage dumper.
parse-opt: have parse_options_{start,end}.
git-blame --reverse
builtin-blame.c: allow more than 16 parents
builtin-blame.c: move prepare_final() into a separate function.
rev-list --children
revision traversal: --children option
|
|
Parent commits are usually older than their children. Thus,
on each iteration of the loop in rewrite_one, add_parents_to_list
traverses all commits previously processed by the loop.
It performs very poorly in case of very long rewrite chains.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems we're using handle_revision_opt the same way each time, have a
wrapper around it that does the 9-liner we copy each time instead.
handle_revision_opt can be static in the module for now, it's always
possible to make it public again if needed.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add two fields to struct rev_info:
- .def to store --default argument; and
- .show_merge 1-bit field.
handle_revision_opt() is able to deal with any revision option, and
consumes them, and leaves revision arguments or pseudo arguments
(like --all, --not, ...) in place.
For now setup_revisions() does a pass of handle_revision_opt() again
so that code not using it in a parse-opt parser still work the same.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jc/blame' (early part):
git-blame --reverse
builtin-blame.c: allow more than 16 parents
builtin-blame.c: move prepare_final() into a separate function.
rev-list --children
revision traversal: --children option
Conflicts:
Documentation/rev-list-options.txt
revision.c
|
|
Reading rev-list parameters from the command line can be reused by
commands other than rev-list. Move this function to more "library-ish"
place to promote code reuse.
Signed-off-by: Adam Brewster <asb@bu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
... nor bogus "format.pretty = '=short'". Both are syntax errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An obvious fix to the argument parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now get_revision() sorts the boundary commits when topo_order is set.
Since sort_in_topological_order() takes a struct commit_list, it first
places the boundary commits into revs->commits.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously the graphing API wasn't aware of the revs->boundary flag, and
it always assumed that commits marked UNINTERESTING would not be
displayed. As a result, the boundary commits were printed at the end of
the log output, but they didn't have any branch lines connecting them to
their children in the graph.
There was also another bug in the get_revision() code that caused
graph_update() to be called twice on the first boundary commit. This
caused the graph API to think that a commit had been skipped, and print
a "..." line in the output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the --graph option, the graph already outputs 'o' instead of '*'
for boundary commits. Make it emit '<' or '>' when --left-right is
specified.
(This change also disables the '^' prefix for UNINTERESTING commits.
The graph code currently doesn't print anything special for these
commits, since it assumes no UNINTERESTING, non-BOUNDARY commits are
displayed. This is potentially a bug if UNINTERESTING non-BOUNDARY
commits can actually be displayed via some code path.)
[jc: squashed the left-right change from Dscho and Adam's fixup into one]
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sv/first-parent:
revision.c: really honor --first-parent
Simplify and fix --first-parent implementation
|
|
In add_parents_to_list, if any parent of a revision had already been
SEEN, the current code would continue with the next parent, skipping
the test for --first-parent. This patch inverts the test for SEEN so
that the test for --first-parent is always performed.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new option causes a text-based representation of the history to be
printed to the left of the normal output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change allows parent rewriting to be performed without causing
the log and rev-list commands to print the parents.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The purpose of --first-parent is to view the tree without looking at
side branche. This is accomplished by pretending there are no other
parents than the first parent when encountering a merge.
The current code marks the other parents as seen, which means that the tree
traversal will behave differently depending on the order merges are handled.
When a fast forward is artificially recorded as a merge,
-----
/ \
D---E---F---G master
the current first-parent code considers E to be seen and stops the
traversal after showing G and F.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/terminator-separator:
log: teach "terminator" vs "separator" mode to "--pretty=format"
|
|
This adds a new --children option to the revision machinery. In addition
to the list of parents, child commits of each commit are computed and
stored as a decoration to each commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
