| Age | Commit message (Collapse) | Author |
|---|
|
Code clean-up.
* jc/retire-cas-opt-name-constant:
remote.h: retire CAS_OPT_NAME
|
|
When the "--force-with-lease" option was introduced in 28f5d176
(remote.c: add command line option parser for "--force-with-lease",
2013-07-08), the design discussion revolved around the concept of
"compare-and-swap", and it can still be seen in the name used for
variables and helper functions. The end-user facing option name
ended up to be a bit different, so during the development iteration
of the feature, we used this C preprocessor macro to make it easier
to rename it later.
All of that happened more than 10 years ago, and the flexibility
afforded by the CAS_OPT_NAME macro outlived its usefulness. Inline
the constant string for the option name, like all other option names
in the code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After we have set up the remote configuration in git-clone(1) we'll call
`remote_get()` to read the remote from the on-disk configuration. But
next to reading the on-disk configuration, `remote_get()` will also
cause us to try and read the repository's HEAD reference so that we can
figure out the current branch. Besides being pointless in git-clone(1)
because we're operating in an empty repository anyway, this will also
break once we move creation of the reference database to a later point
in time.
Refactor the code to introduce a new `remote_get_early()` function that
will skip reading the HEAD reference to address this issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user is in the middle of making a commit, they are not yet at
the point where they are ready to think about integrating their local
branch with the corresponding remote branch or force-pushing over the
remote branch. Don't include advice on how to deal with divergent
branches in the commit template, to avoid giving the impression that the
divergence needs to be dealt with immediately. Similar advice will be
printed when it is most relevant, that is, if the user does try to push
without first reconciling the two branches.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
oidhash() was used by both hashmap and khash, which makes sense.
However, the location of this function in hashmap.[ch] meant that
khash.h had to depend upon hashmap.h, making people unfamiliar with
khash think that it was built upon hashmap. (Or at least, I personally
was confused for a while about this in the past.)
Move this function to hash-ll, so that khash.h can stop depending upon
hashmap.h.
This has another benefit as well: it allows us to remove hashmap.h's
dependency on hash-ll.h. While some callers of hashmap.h were making
use of oidhash, most were not, so this change provides another way to
reduce the number of includes.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to include and/or uninclude parse-options.h file as
needed.
* sg/parse-options-h-users:
treewide: remove unnecessary inclusions of parse-options.h from headers
treewide: include parse-options.h in source files
|
|
The headers 'diagnose.h', 'list-objects-filter-options.h',
'ref-filter.h' and 'remote.h' declare option parsing callback
functions with a 'struct option*' parameter, and 'revision.h' declares
an option parsing helper function taking 'struct parse_opt_ctx_t*' and
'struct option*' parameters. These headers all include
'parse-options.h', although they don't need any of the type
definitions from that header file. Furthermore,
'list-objects-filter-options.h' and 'ref-filter.h' also define some
OPT_* macros to initialize a 'struct option', but these don't
necessitate the inclusion of parse-options.h in these headers either,
because these macros are only expanded in source files.
Remove these unnecessary inclusions of parse-options.h and use forward
declarations to declare the necessary types.
After this patch none of the header files include parse-options.h
anymore.
With these changes, the build time after modifying only
parse-options.h is reduced by about 30%, and the number of targets
built is almost 20% less:
Before:
$ touch parse-options.h && time make -j4 |wc -l
353
real 1m1.527s
user 3m32.205s
sys 0m15.903s
After:
289
real 0m39.285s
user 2m12.540s
sys 0m11.164s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We had several header files include cache.h unnecessarily. Remove
those. These have all been verified via both ensuring that
gcc -E $HEADER | grep '"cache.h"'
found no hits and that
cat >temp.c <<EOF &&
#include "git-compat-util.h"
#include "$HEADER"
int main() {}
EOF
gcc -c temp.c
successfully compiles without warnings.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make our mergesort implementation type-safe.
* rs/mergesort:
mergesort: remove llist_mergesort()
packfile: use DEFINE_LIST_SORT
fetch-pack: use DEFINE_LIST_SORT
commit: use DEFINE_LIST_SORT
blame: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT
test-mergesort: use DEFINE_LIST_SORT_DEBUG
mergesort: add macros for typed sort of linked lists
mergesort: tighten merge loop
mergesort: unify ranks loops
|
|
Build a static typed ref sorting function using DEFINE_LIST_SORT along
with a typed comparison function near its only two callers instead of
having an exported version that calls llist_mergesort(). This gets rid
of the next pointer accessor functions and their calling overhead at the
cost of a slightly increased object text size.
Before:
__TEXT __DATA __OBJC others dec hex
23231 389 0 113689 137309 2185d fetch-pack.o
29158 80 0 146864 176102 2afe6 remote.o
With this patch:
__TEXT __DATA __OBJC others dec hex
23591 389 0 117759 141739 229ab fetch-pack.o
29070 80 0 145718 174868 2ab14 remote.o
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, the git remote show command will query data from remotes to
show data about what might be done on a future git fetch. This process
currently does not handle negative refspecs. This can be confusing,
because the show command will list refs as if they would be fetched. For
example if the fetch refspec "^refs/heads/pr/*", it still displays the
following:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 new (next fetch will store in remotes/jdk19)
pr/2 new (next fetch will store in remotes/jdk19)
pr/3 new (next fetch will store in remotes/jdk19)
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
Fix this by adding an additional check inside of get_ref_states. If a
ref matches one of the negative refspecs, mark it as skipped instead of
marking it as new or tracked.
With this change, we now report remote branches that are skipped due to
negative refspecs properly:
* remote jdk19
Fetch URL: git@github.com:openjdk/jdk19.git
Push URL: git@github.com:openjdk/jdk19.git
HEAD branch: master
Remote branches:
master tracked
pr/1 skipped
pr/2 skipped
pr/3 skipped
Local ref configured for 'git push':
master pushes to master (fast-forwardable)
By showing the refs as skipped, it helps clarify that these references
won't actually be fetched.
This does not properly handle refs going stale due to a newly added
negative refspec. In addition, git remote prune doesn't handle that
negative refspec case either. Fixing that requires digging into
get_stale_heads and handling the case of a ref which exists on the
remote but is omitted due to a negative refspec locally.
Add a new test case which covers the functionality above, as well as a
new expected failure indicating the poor overlap with stale refs.
Reported-by: Pavel Rappo <pavel.rappo@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the 'url' parameter was absolute, the previous implementation would
concatenate 'remote_url' with 'url'. Instead, we want to return 'url' in
this case.
The documentation now discusses what happens when supplying two
absolute URLs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This method was initially written in 63e95beb0 (submodule: port
resolve_relative_url from shell to C, 2016-05-15). As we will need
similar functionality in the bundle URI feature, extract this to be
available in remote.h.
The code is almost exactly the same, except for the following trivial
differences:
* Fix whitespace and wrapping issues with the prototype and argument
lists.
* Let's call starts_with_dot_{,dot_}slash_native() instead of the
functionally identical "starts_with_dot_{,dot_}slash()" wrappers
"builtin/submodule--helper.c".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit, we would like external-facing functions to be
able to accept "struct repository" and "struct branch" as a pair. This
is useful for functions like pushremote_for_branch(), which need to take
values from the remote_state and branch, even if branch == NULL.
However, a caller may supply an unrelated repository and branch, which
is not supported behavior.
To prevent misuse, add a die_on_missing_branch() helper function that
dies if a given branch is not from a given repository. Speed up the
existence check by replacing the branches list with a branches_hash
hashmap.
Like read_config(), die_on_missing_branch() is only called from
non-static functions; static functions are less prone to misuse because
they have strong conventions for keeping remote_state and branch in
sync.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without changing external-facing functions, replace
the_repository->remote_state internally by adding a struct remote_state
parameter.
As a result, external-facing functions are still tied to the_repository,
but most static functions no longer reference
the_repository->remote_state. The exceptions are those that are used in
a way that depends on external-facing functions e.g. the callbacks to
remote_get_1().
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
remote.c does not works with non-the_repository because it stores its
state as static variables. To support non-the_repository, we can use a
per-repository struct for the remotes subsystem.
Prepare for this change by defining a struct remote_state that holds
the remotes subsystem state and move the static variables of remote.c
into the_repository->remote_state.
This introduces no behavioral or API changes.
Signed-off-by: Glen Choo <chooglen@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
|
|
In a future patch we plan to return the name of an unborn current branch
from deep in the callchain to a caller via a new pointer parameter that
points at a variable in the caller when the caller calls
get_remote_refs() and transport_get_remote_refs().
In preparation for that, encapsulate the existing ref_prefixes
parameter into a struct. The aforementioned unborn current branch will
go into this new struct in the future patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When performing a fetch with the default `--write-fetch-head` option, we
write all updated references to FETCH_HEAD while the updates are
performed. Given that updates are not performed atomically, it means
that we we write to FETCH_HEAD even if some or all of the reference
updates fail.
Given that we simply update FETCH_HEAD ad-hoc with each reference, the
logic is completely contained in `store_update_refs` and thus quite hard
to extend. This can already be seen by the way we skip writing to the
FETCH_HEAD: instead of having a conditional which simply skips writing,
we instead open "/dev/null" and needlessly write all updates there.
We are about to extend git-fetch(1) to accept an `--atomic` flag which
will make the fetch an all-or-nothing operation with regards to the
reference updates. This will also require us to make the updates to
FETCH_HEAD an all-or-nothing operation, but as explained doing so is not
easy with the current layout. This commit thus refactors the wa we write
to FETCH_HEAD and pulls out the logic to open, append to, commit and
close the file. While this may seem rather over-the top at first,
pulling out this logic will make it a lot easier to update the code in a
subsequent commit. It also allows us to easily skip writing completely
in case `--no-write-fetch-head` was passed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --force-with-lease[=<ref>]" can easily be misused to lose
commits unless the user takes good care of their own "git fetch".
A new option "--force-if-includes" attempts to ensure that what is
being force-pushed was created after examining the commit at the
tip of the remote ref that is about to be force-replaced.
* sk/force-if-includes:
t, doc: update tests, reference for "--force-if-includes"
push: parse and set flag for "--force-if-includes"
push: add reflog check for "--force-if-includes"
|
|
"git fetch" and "git push" support negative refspecs.
* jk/refspecs-negative:
refspec: add support for negative refspecs
|
|
Add a check to verify if the remote-tracking ref of the local branch
is reachable from one of its "reflog" entries.
The check iterates through the local ref's reflog to see if there
is an entry for the remote-tracking ref and collecting any commits
that are seen, into a list; the iteration stops if an entry in the
reflog matches the remote ref or if the entry timestamp is older
the latest entry of the remote ref's "reflog". If there wasn't an
entry found for the remote ref, "in_merge_bases_many()" is called
to check if it is reachable from the list of collected commits.
When a local branch that is based on a remote ref, has been rewound
and is to be force pushed on the remote, "--force-if-includes" runs
a check that ensures any updates to the remote-tracking ref that may
have happened (by push from another repository) in-between the time
of the last update to the local branch (via "git-pull", for instance)
and right before the time of push, have been integrated locally
before allowing a forced update.
If the new option is passed without specifying "--force-with-lease",
or specified along with "--force-with-lease=<refname>:<expect>" it
is a "no-op".
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both fetch and push support pattern refspecs which allow fetching or
pushing references that match a specific pattern. Because these patterns
are globs, they have somewhat limited ability to express more complex
situations.
For example, suppose you wish to fetch all branches from a remote except
for a specific one. To allow this, you must setup a set of refspecs
which match only the branches you want. Because refspecs are either
explicit name matches, or simple globs, many patterns cannot be
expressed.
Add support for a new type of refspec, referred to as "negative"
refspecs. These are prefixed with a '^' and mean "exclude any ref
matching this refspec". They can only have one "side" which always
refers to the source. During a fetch, this refers to the name of the ref
on the remote. During a push, this refers to the name of the ref on the
local side.
With negative refspecs, users can express more complex patterns. For
example:
git fetch origin refs/heads/*:refs/remotes/origin/* ^refs/heads/dontwant
will fetch all branches on origin into remotes/origin, but will exclude
fetching the branch named dontwant.
Refspecs today are commutative, meaning that order doesn't expressly
matter. Rather than forcing an implied order, negative refspecs will
always be applied last. That is, in order to match, a ref must match at
least one positive refspec, and match none of the negative refspecs.
This is similar to how negative pathspecs work.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
The new introduced "proc-receive" hook may handle a command for a
pseudo-reference with a zero-old as its old-oid, while the hook may
create or update a reference with different name, different new-oid,
and different old-oid (the reference may exist already with a non-zero
old-oid). Current "report-status" protocol cannot report the status for
such reference rewrite.
Add new capability "report-status-v2" and new report protocol which is
not backward compatible for report of git-push.
If a user pushes to a pseudo-reference "refs/for/master/topic", and
"receive-pack" creates two new references "refs/changes/23/123/1" and
"refs/changes/24/124/1", for client without the knowledge of
"report-status-v2", "receive-pack" will only send "ok/ng" directives in
the report, such as:
ok ref/for/master/topic
But for client which has the knowledge of "report-status-v2",
"receive-pack" will use "option" directives to report more attributes
for the reference given by the above "ok/ng" directive.
ok refs/for/master/topic
option refname refs/changes/23/123/1
option new-oid <new-oid>
ok refs/for/master/topic
option refname refs/changes/24/124/1
option new-oid <new-oid>
The client will report two new created references to the end user.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The name "argv-array" isn't very good, because it describes what the
data type can be used for (program argument arrays), not what it
actually is (a dynamically-growing string array that maintains a
NULL-terminator invariant). This leads to people being hesitant to use
it for other cases where it would actually be a good fit. The existing
name is also clunky to use. It's overly long, and the name often leads
to saying things like "argv.argv" (i.e., the field names overlap with
variable names, since they're describing the use, not the type). Let's
give it a more neutral name.
I settled on "strvec" because "vector" is the name for a dynamic array
type in many programming languages. "strarray" would work, too, but it's
longer and a bit more awkward to say (and don't we all say these things
in our mind as we type them?).
A more extreme direction would be a generic data structure which stores
a NULL-terminated of _any_ type. That would be easy to do with void
pointers, but we'd lose some type safety for the existing cases. Plus it
raises questions about memory allocation and ownership. So I limited
myself here to changing names only, and not semantics. If we do find a
use for that more generic data type, we could perhaps implement it at a
lower level and then provide type-safe wrappers around it for strings.
But that can come later.
This patch does the minimum to convert the struct and function names in
the header and implementation, leaving a few things for follow-on
patches:
- files retain their original names for now
- struct field names are retained for now
- there's a preprocessor compat layer that lets most users remain the
same for now. The exception is headers which made a manual forward
declaration of the struct. I've converted them (and their dependent
function declarations) here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 9700fae5ee (for-each-ref: let upstream/push report the remote
ref name, 2017-11-07) added a remote_ref_for_branch() helper, which
is modeled after remote_for_branch(). This includes providing an
"explicit" out-parameter that tells the caller whether the remote
was configured by the user, or whether we picked a default name like
"origin".
But unlike remote names, there is no default name when the user
didn't configure one. The only way the "explicit" parameter is used
by the caller is to use the value returned from the helper when it
is set, and use an empty string otherwise, ignoring the returned
value from the helper.
Let's drop the "explicit" out-parameter, and return NULL when the
returned value from the helper should be ignored, to simplify the
function interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the documentation from Documentation/technical/api-remote.txt to
remote.h and refspec.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
N.B. The doc for both push and fetch members of the remote struct aren't
moved because they are out of date, as the members were changed from arrays
of rspecs to struct refspec 2 years ago.
Also documentation/technical/api-remote.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comments stating that "struct hashmap_entry" must be the first
member in a struct are no longer valid.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mechanically and systematically drop "extern" from function
declarlation.
* dl/no-extern-in-func-decl:
*.[ch]: manually align parameter lists
*.[ch]: remove extern from function declarations using sed
*.[ch]: remove extern from function declarations using spatch
|
|
%(push:track) token used in the --format option to "git
for-each-ref" and friends was not showing the right branch, which
has been fixed.
* dr/ref-filter-push-track-fix:
ref-filter: use correct branch for %(push:track)
|
|
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.
Viewing this patch with 'git diff -w' should produce no output.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In ref-filter.c, when processing the atom %(push:track), the
ahead/behind values are computed using `stat_tracking_info` which refers
to the upstream branch.
Fix that by introducing a new flag `for_push` in `stat_tracking_info`
in remote.c, which does the same thing but for the push branch.
Update the few callers of `stat_tracking_info` to handle this flag. This
ensure that whenever we use this function in the future, we are careful
to specify is this should apply to the upstream or the push branch.
This bug was not detected in t/t6300-for-each-ref.sh because in the test
for push:track, both the upstream and the push branches were behind by 1
from the local branch. Change the test so that the upstream branch is
behind by 1 while the push branch is ahead by 1. This allows us to test
that %(push:track) refers to the correct branch.
This changes the expected value of some following tests (by introducing
new references), so update them too.
Signed-off-by: Damien Robert <damien.olivier.robert+git@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We provide a free_refs() function to free a list, but there's no easy
way for a caller to free a single ref. Let's make our singular
free_ref() function public. Since its name is so similar to the
list-freeing free_refs(), and because both of those functions have the
same signature, it might be easy to accidentally use the wrong one.
Let's call the singular version the more verbose "free_one_ref()" to
distinguish it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The ref_newer() method is used by 'git push -f' to check if a force-push
is necessary. By making the method public, we make it possible to test
the method directly without setting up an envieronment where a 'git
push' call makes sense.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
|
|
Convert 'check_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'match_push_refs()' to take a 'struct refspec' as a parameter
instead of an array of 'const char *'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'query_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'apply_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'get_stale_heads()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove 'add_prune_tags_to_fetch_refspec()' function and instead have the
only caller directly add the tag refspec using 'refspec_append()'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the set of fetch refspecs stored in 'struct remote' to use
'struct refspec'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
