| Age | Commit message (Collapse) | Author |
|---|
|
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
|
|
The "git ls-remote" command can be run outside of a
repository, but needs to look up configured remotes. The
config code is smart enough to handle this case itself, but
we also check the historical "branches" and "remotes" paths
in $GIT_DIR. The git_path() function causes us to blindly
look at ".git/remotes", even if we know we aren't in a git
repository.
For now, this is just an unlikely bug (you probably don't
have such a file if you're not in a repository), but it will
become more obvious once we merge b1ef400ee (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20):
[now]
$ git ls-remote
fatal: No remote configured to list refs from.
[with b1ef400ee]
$ git ls-remote
fatal: BUG: setup_git_env called without repository
We can fix this by skipping these sources entirely when
we're outside of a repository.
The test is a little more complex than the demonstration
above. Rather than detect the correct behavior by parsing
the error message, we can actually set up a case where the
remote name we give is a valid repository, but b1ef400ee
would cause us to die in the configuration step.
This test doesn't fail now, but it future-proofs us for the
b1ef400ee change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
|
|
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
|
|
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
|
|
Move the detached HEAD check from branch_get_push_1() to
branch_get_push() to avoid setting branch->push_tracking_ref when
branch is NULL.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls. This makes the intent clearer and avoids
potential issues with printf format specifiers.
02962d36845b89145cd69f8bc65e015d78ae3434 already converted six cases,
this patch covers eleven more.
A semantic patch for Coccinelle is included for easier checking for
new cases that might be introduced in the future.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --force-with-lease" already had enough logic to allow
ensuring that such a push results in creation of a ref (i.e. the
receiving end did not have another push from sideways that would be
discarded by our force-pushing), but didn't expose this possibility
to the users. It does so now.
* jk/push-force-with-lease-creation:
t5533: make it pass on case-sensitive filesystems
push: allow pushing new branches with --force-with-lease
push: add shorthand for --force-with-lease branch creation
Documentation/git-push: fix placeholder formatting
|
|
If there is no upstream information for a branch, it is likely that it
is newly created and can safely be pushed under the normal fast-forward
rules. Relax the --force-with-lease check so that we do not reject
these branches immediately but rather attempt to push them as new
branches, using the null SHA-1 as the expected value.
In fact, it is already possible to push new branches using the explicit
--force-with-lease=<branch>:<expect> syntax, so all we do here is make
this behaviour the default if no explicit "expect" value is specified.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow the empty string to stand in for the null SHA-1 when pushing a new
branch, like we do when deleting branches.
This means that the following command ensures that `new-branch` is
created on the remote (that is, is must not already exist):
git push --force-with-lease=new-branch: origin new-branch
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Message fix.
* nd/remote-plural-ours-plus-theirs:
remote.c: specify correct plural form in "commit diverge" message
|
|
Code fixup.
* jk/fix-attribute-macro-in-2.5:
remote.c: spell __attribute__ correctly
|
|
Message fix.
* nd/remote-plural-ours-plus-theirs:
remote.c: specify correct plural form in "commit diverge" message
|
|
We need to count both "ours" and "theirs" commits when selecting plural
form for this message. Note that even though in this block, both ours
and theirs must be positive (i.e. can't be in singular form), we still
keep Q_(singular, plural) because languages other than English may have
more than one plural form.
Reported-by: Alfonsogonzalez, Ernesto (GE Digital) <ernesto.alfonsogonzalez@ge.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code fixup.
* jk/fix-attribute-macro-in-2.5:
remote.c: spell __attribute__ correctly
|
|
We want to tell the compiler that error_buf() uses
printf()-style arguments via the __attribute__ mechanism,
but the original commit (3a429d0), forgot the trailing "__".
This happens to work with real GNUC-compatible compilers
like gcc and clang, but confuses our fallback macro in
git-compat-util.h, which only matches the official name (and
thus the build fails on compilers like Visual Studio).
Reported-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/tighten-alloc: (23 commits)
compat/mingw: brown paper bag fix for 50a6c8e
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
...
|
|
The remote-config code wants to look at HEAD to mark the
current branch specially. But if we are not in a repository
(e.g., running "git archive --remote"), this makes no sense;
there is no HEAD to look at, and we have no current branch.
This doesn't really cause any bugs in practice (if you are
not in a repo, you probably don't have a .git/HEAD file),
but we should be more careful about triggering the refs code
at all in a non-repo. As we grow new ref backends, we would
not even know which backend to use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
|
The internal API to interact with "remote.*" configuration
variables has been streamlined.
* tg/git-remote:
remote: use remote_is_configured() for add and rename
remote: actually check if remote exits
remote: simplify remote_is_configured()
remote: use parse_config_key
|
|
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using FLEX_ARRAY macros reduces the amount of manual
computation size we have to do. It also ensures we don't
overflow size_t, and it makes sure we write the same number
of bytes that we allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The remote_is_configured() function allows checking whether a remote
exists or not. The function however only works if remote_get() wasn't
called before calling it. In addition, it only checks the configuration
for remotes, but not remotes or branches files.
Make use of the origin member of struct remote instead, which indicates
where the remote comes from. It will be set to some value if the remote
is configured in any file in the repository, but is initialized to 0 if
the remote is only created in make_remote().
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
95b567c7 ("use skip_prefix to avoid repeating strings") transformed
calls using starts_with() and then skipping the length of the prefix to
skip_prefix() calls. In remote.c there are a few calls like:
if (starts_with(foo, "bar"))
foo += 3
These calls weren't touched by the aformentioned commit, but can be
replaced by calls to parse_config_key(), to simplify the code and
clarify the intentions. Do that.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push --force-with-lease" has been taught to report if the push
needed to force (or fast-forwarded).
* aw/push-force-with-lease-reporting:
push: fix ref status reporting for --force-with-lease
|
|
New http.proxyAuthMethod configuration variable can be used to
specify what authentication method to use, as a way to work around
proxies that do not give error response expected by libcurl when
CURLAUTH_ANY is used. Also, the codepath for proxy authentication
has been taught to use credential API to store the authentication
material in user's keyrings.
* kf/http-proxy-auth-methods:
http: use credential API to handle proxy authentication
http: allow selection of proxy authentication method
|
|
The --force--with-lease push option leads to less
detailed status information than --force. In particular,
the output indicates that a reference was fast-forwarded,
even when it was force-updated.
Modify the --force-with-lease ref status logic to leverage
the --force ref status logic when the "lease" conditions
are met.
Also, enhance tests to validate output status reporting.
Signed-off-by: Andrew Wheeler <awheeler@motorola.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CURLAUTH_ANY does not work with proxies which answer unauthenticated requests
with a 307 redirect to an error page instead of a 407 listing supported
authentication methods. Therefore, allow the authentication method to be set
using the environment variable GIT_HTTP_PROXY_AUTHMETHOD or configuration
variables http.proxyAuthmethod and remote.<name>.proxyAuthmethod (in analogy
to http.proxy and remote.<name>.proxy).
The following values are supported:
* anyauth (default)
* basic
* digest
* negotiate
* ntlm
Signed-off-by: Knut Franke <k.franke@science-computing.de>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These files can be edited with a DOS editor, leaving CR at the end
of the line if read with strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert several unsigned char arrays to use struct object_id instead,
and change hard-coded 40-based constants to use GIT_SHA1_HEXSZ as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert ref_newer and its caller to use struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Code simplification.
* rs/pop-commit:
use pop_commit() for consuming the first entry of a struct commit_list
|
|
Instead of open-coding the function pop_commit() just call it. This
makes the intent clearer and reduces code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The earlier rewrite f28e3ab2 (read_branches_file: simplify string handling)
of read_branches_file() lost an fclose() call. Put it back.
As on Windows files that are open cannot be removed, the leak manifests in
a failure of 'git remote rename origin origin' when the remote's URL is
specified in .git/branches/origin, because by the time that the command
attempts to remove this file, it is still open.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to dropping the magic number for the fixed-size
argv, we can also drop a fixed-length buffer and some
strcpy's into it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main motivation for this cleanup is to switch our
line-reading to a strbuf, which removes the use of a
fixed-size buffer (which limited the size of remote URLs).
Since we have the strbuf, we can make use of strbuf_rtrim().
While we're here, we can also simplify the parsing of each
line. First, we can use skip_prefix() to avoid some magic
numbers.
But second, we can avoid splitting the parsing and actions
for each line into two stages. Right now we figure out which
type of line we have, set an int to a magic number,
skip any intermediate whitespace, and then act on
the resulting value based on the magic number.
Instead, let's factor the whitespace skipping into a
function. That lets us avoid the magic numbers and keep the
actions close to the parsing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function does a lot of manual string handling, and has
some unnecessary limits. This patch cleans up a number of
things:
1. Drop the arbitrary 1000-byte limit on the size of the
remote name (we do not have such a limit in any of the
other remote-reading mechanisms).
2. Replace fgets into a fixed-size buffer with a strbuf,
eliminating any limits on the length of the URL.
3. Replace manual whitespace handling with strbuf_trim
(since we now have a strbuf). This also gets rid
of a call to strcpy, and the confusing reuse of the "p"
pointer for multiple purposes.
4. We currently build up the refspecs over multiple strbuf
calls. We do this to handle the fact that the URL "frag"
may not be present. But rather than have multiple
conditionals, let's just default "frag" to "master".
This lets us format the refspecs with a single xstrfmt.
It's shorter, and easier to see what the final string
looks like.
We also update the misleading comment in this area (the
local branch is named after the remote name, not after
the branch name on the remote side).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common pattern to do:
foo = xmalloc(strlen(one) + strlen(two) + 1 + 1);
sprintf(foo, "%s %s", one, two);
(or possibly some variant with strcpy()s or a more
complicated length computation). We can switch these to use
xstrfmt, which is shorter, involves less error-prone manual
computation, and removes many sprintf and strcpy calls which
make it harder to audit the code for real buffer overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a triangular workflow, the place you pull from and the
place you push to may be different. As we have
branch_get_upstream for the former, this patch adds
branch_get_push for the latter (and as the former implements
@{upstream}, so will this implement @{push} in a future
patch).
Note that the memory-handling for the return value bears
some explanation. Some code paths require allocating a new
string, and some let us return an existing string. We should
provide a consistent interface to the caller, so it knows
whether to free the result or not.
We could do so by xstrdup-ing any existing strings, and
having the caller always free. But that makes us
inconsistent with branch_get_upstream, so we would prefer to
simply take ownership of the resulting string. We do so by
storing it inside the "struct branch", just as we do with
the upstream refname (in that case we compute it when the
branch is created, but there's no reason not to just fill
it in lazily in this case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The error-diagnosis logic in branch_get_upstream was copied
straight from sha1_name.c in the previous commit. However,
because we check all error cases and upfront and then later
diagnose them, the logic is a bit tangled. In particular:
- if branch->merge[0] is NULL, we may end up dereferencing
it for an error message (in practice, it should never be
NULL, so this is probably not a triggerable bug).
- We may enter the code path because branch->merge[0]->dst
is NULL, but we then start our error diagnosis by
checking whether our local branch exists. But that is
only relevant to diagnosing missing merge config, not a
missing tracking ref; our diagnosis may hide the real
problem.
Instead, let's just use a sequence of "if" blocks to check
for each error type, diagnose it, and return NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
