| Age | Commit message (Collapse) | Author |
|---|
|
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
|
|
After generating diffs for each range to be compared using a 'git log'
invocation, range-diff.c::read_patches looks for the "diff --git" header
in those diffs to recognize the beginning of a new change.
In a project with submodules, and with 'diff.submodule=log' set in the
config, this header is missing for the diff of a changed submodule, so
any submodule changes are quietly ignored in the range-diff.
When 'diff.submodule=diff' is set in the config, the "diff --git" header
is also missing for the submodule itself, but is shown for submodule
content changes, which can easily confuse 'git range-diff' and lead to
errors such as:
error: git apply: bad git-diff - inconsistent old filename on line 1
error: could not parse git header 'diff --git path/to/submodule/and/some/file/within
'
error: could not parse log for '@{u}..@{1}'
Force the submodule diff format to its default ("short") when invoking
'git log' to generate the patches for each range, such that submodule
changes are always detected.
Add a test, including an invocation with '--creation-factor=100' to
force the second commit in the range not to be considered a complete
rewrite, in order to verify we do indeed get the "short" format.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The users of the revision.[ch] API's "struct rev_info" are a major
source of memory leaks in the test suite under SANITIZE=leak, which in
turn adds a lot of noise when trying to mark up tests with
"TEST_PASSES_SANITIZE_LEAK=true".
The users of that API are largely one-shot, e.g. "git rev-list" or
"git log", or the "git checkout" and "git stash" being modified here
For these callers freeing the memory is arguably a waste of time, but
in many cases they've actually been trying to free the memory, and
just doing that in a buggy manner.
Let's provide a release_revisions() function for these users, and
start migrating them over per the plan outlined in [1]. Right now this
only handles the "pending" member of the struct, but more will be
added in subsequent commits.
Even though we only clear the "pending" member now, let's not leave a
trap in code like the pre-image of index_differs_from(), where we'd
start doing the wrong thing as soon as the release_revisions() learned
to clear its "diffopt". I.e. we need to call release_revisions() after
we've inspected any state in "struct rev_info".
This leaves in place e.g. clear_pathspec(&rev.prune_data) in
stash_working_tree() in builtin/stash.c, subsequent commits will teach
release_revisions() to free "prune_data" and other members that in
some cases are individually cleared by users of "struct rev_info" by
reaching into its members. Those subsequent commits will remove the
relevant calls to e.g. clear_pathspec().
We avoid amending code in index_differs_from() in diff-lib.c as well
as wt_status_collect_changes_index(), has_unstaged_changes() and
has_uncommitted_changes() in wt-status.c in a way that assumes that we
are already clearing the "diffopt" member. That will be handled in a
subsequent commit.
1. https://lore.kernel.org/git/87a6k8daeu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend code added in d9c66f0b5bf (range-diff: first rudimentary
implementation, 2018-08-13) to use a "goto cleanup" pattern. This
makes for less code, and frees memory that we'd previously leak.
The reason for changing free(util) to FREE_AND_NULL(util) is because
at the end of the function we append the contents of "util" to a
"struct string_list" if it's non-NULL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a public release_patch() version of the private free_patch()
function added in 13b5af22f39 (apply: move libified code from
builtin/apply.c to apply.{c,h}, 2016-04-22). Unlike the existing
function this one doesn't free() the "struct patch" itself, so we can
use it for variables on the stack.
Use it in range-diff.c to fix a memory leak in common range-diff
invocations, e.g.:
git -P range-diff origin/master origin/next origin/seen
Would emit several errors when compiled with SANITIZE=leak, but now
runs cleanly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use static strings for constant parts of the sentences. They are all
turned into "cannot be used together".
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git range-diff -I... <range> <range>" segfaulted, which has been
corrected.
* rs/range-diff-avoid-segfault-with-I:
range-diff: avoid segfault with -I
|
|
output() reuses the same struct diff_options for multiple calls of
diff_flush(). Set the option no_free to instruct it to keep the
ignore regexes between calls and release them explicitly at the end.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
|
|
As we iterate through the buffer containing git-log output, parsing
lines, we use an "int" to store the size of an individual line. This
should be a size_t, as we have no guarantee that there is not a
malicious 2GB+ commit-message line in the output.
Overflowing this integer probably doesn't do anything _too_ terrible. We
are not using the value to size a buffer, so the worst case is probably
an out-of-bounds read from before the array. But it's easy enough to
fix.
Note that we have to use ssize_t here, since we also store the length
result from parse_git_diff_header(), which may return a negative value
for error. That function actually returns an int itself, which has a
similar overflow problem, but I'll leave that for another day. Much
of the apply.c code uses ints and should be converted as a whole; in the
meantime, a negative return from parse_git_diff_header() will be
interpreted as an error, and we'll bail (so we can't handle such a case,
but given that it's likely to be malicious anyway, the important thing
is we don't have any memory errors).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing our buffer of output from git-log, we have a
find_end_of_line() helper that finds the next newline, and gives us the
number of bytes to move past it, or the size of the whole remaining
buffer if there is no newline.
But trying to handle both those cases leads to some oddities:
- we try to overwrite the newline with NUL in the caller, by writing
over line[len-1]. This is at best redundant, since the helper will
already have done so if it saw a newline. But if it didn't see a
newline, it's actively wrong; we'll overwrite the byte at the end of
the (unterminated) line.
We could solve this just dropping the extra NUL assignment in the
caller and just letting the helper do the right thing. But...
- if we see a "diff --git" line, we'll restore the newline on top of
the NUL byte, so we can pass the string to parse_git_diff_header().
But if there was no newline in the first place, we can't do this.
There's no place to put it (the current code writes a newline
over whatever byte we obliterated earlier). The best we can do is
feed the complete remainder of the buffer to the function (which is,
in fact, a string, by virtue of being a strbuf).
To solve this, the caller needs to know whether we actually found a
newline or not. We could modify find_end_of_line() to return that
information, but we can further observe that it has only one caller.
So let's just inline it in that caller.
Nobody seems to have noticed this case, probably because git-log would
never produce input that doesn't end with a newline. Arguably we could
just return an error as soon as we see that the output does not end in a
newline. But the code to do so actually ends up _longer_, mostly because
of the cleanup we have to do in handling the error.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "offset" variable was was introduced in 44b67cb62b (range-diff:
split lines manually, 2019-07-11), but it has never done anything
useful. We use it to count up the number of bytes we've consumed, but we
never look at the result. It was probably copied accidentally from an
almost-identical loop in apply.c:find_header() (and the point of that
commit was to make use of the parse_git_diff_header() function which
underlies both).
Because the variable was set but not used, most compilers didn't seem to
notice, but the upcoming clang-14 does complain about it, via its
-Wunused-but-set-variable warning.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
|
|
Change the function prototype of xdiff_emit_line_fn to return an "int"
instead of "void". Change all of those functions to "return 0",
nothing checks those return values yet, and no behavior is being
changed.
In subsequent commits the interface will be changed to allow early
return via this new return value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
|
|
In the `SPECIFYING RANGES` section of gitrevisions[7], two ways are
described to specify commit ranges that `range-diff` does not yet
accept: "<commit>^!" and "<commit>^-<n>".
Let's accept them, by parsing them via the revision machinery and
looking for at least one interesting and one uninteresting revision in
the resulting `pending` array.
This also finally lets us reject arguments that _do_ contain `..` but
are not actually ranges, e.g. `HEAD^{/do.. match this}`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When comparing commit ranges, one is frequently interested only in one
side, such as asking the question "Has this patch that I submitted to
the Git mailing list been applied?": one would only care about the part
of the output that corresponds to the commits in a local branch.
To make that possible, imitate the `git rev-list` options `--left-only`
and `--right-only`.
This addresses https://github.com/gitgitgadget/git/issues/206
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is actually only the `output()` function that uses those diffopts. By
moving the diffopt initialization down into that function, it is
encapsulated better.
Incidentally, it will also make it easier to implement the `--left-only`
and `--right-only` options in `git range-diff` because the `output()`
function is now receiving all range-diff options as a parameter, not
just the diffopts.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will make it easier to implement the `--left-only` and
`--right-only` options.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, we waited for the child process to be finished in every
failing code path as well as at the end of the function
`show_range_diff()`.
However, we do not need to wait that long. Directly after reading the
output of the child process, we can wrap up the child process.
This also has the advantage that we don't do a bunch of unnecessary work
in case `finish_command()` returns with an error anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In library functions, we do want to avoid the (simple, but rather final)
`die()` calls, instead returning with a value indicating an error.
Let's do exactly that in the code introduced in b66885a30cb8
(range-diff: add section header instead of diff header, 2019-07-11) that
wants to error out if a diff header could not be parsed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the code paths in question, we already release a lot of memory, but
the `current_filename` variable was missed. Fix that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, when called with exactly two arguments, `git range-diff`
tests for a literal `..` in each of the two. Likewise, the argument
provided via `--range-diff` to `git format-patch` is checked in the same
manner.
However, `<commit>^!` is a perfectly valid commit range, equivalent to
`<commit>^..<commit>` according to the `SPECIFYING RANGES` section of
gitrevisions[7].
In preparation for allowing more sophisticated ways to specify commit
ranges, let's refactor the check into its own function.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the supplied integer for "precision" is negative in
`"%.*s", len, line` then it is ignored. So the current code is
equivalent to just `"%s", line` because it is executed only if
`len` is negative.
Fix this by saving the value of `len` before overwriting it with the
return value of `parse_git_diff_header()`.
Signed-off-by: Vasil Dimov <vd@FreeBSD.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git range-diff` calls `git log` internally and tries to parse its
output. But `git log` output can be customized by the user in their
git config and for certain configurations either an error will be
returned by `git range-diff` or it will crash.
To fix this explicitly set the output format of the internally
executed `git log` with `--pretty=medium`. Because that cancels
`--notes`, add explicitly `--notes` at the end.
Also, make sure we never crash in the same way - trying to dereference
`util` which was never created and has remained NULL. It would happen
if the first line of `git log` output does not begin with 'commit '.
Alternative considered but discarded - somehow disable all git configs
and behave as if no config is present in the internally executed
`git log`, but that does not seem to be possible. GIT_CONFIG_NOSYSTEM
is the closest to it, but even with that we would still read
`.git/config`.
Signed-off-by: Vasil Dimov <vd@FreeBSD.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The contents pointed to by `diffopt` and `other_arg` should not be
modified. Mark these as `const` to indicate this.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When notes were included in the output of range-diff, they were just
mashed together with the rest of the commit message. As a result, users
wouldn't be able to clearly distinguish where the commit message ended
and where the notes started.
Output a `## Notes ##` header when notes are detected so that notes can
be compared more clearly.
Note that we handle case of `Notes (<ref>): -> ## Notes (<ref>) ##` with
this code as well. We can't test this in this patch, however, since
there is currently no way to pass along different notes refs to `git
log`. This will be fixed in a future patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
And add *_entry variants to perform container_of as necessary
to simplify most callers.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing the diffs, `range-diff` expects to see the prefixes `a/`
and `b/` in the diff headers.
These prefixes can be forced off via the config setting
`diff.noprefix=true`. As `range-diff` is not prepared for that
situation, this will cause a segmentation fault.
Let's avoid that by passing the `--no-prefix` option to the `git log`
process that generates the diffs that `range-diff` wants to parse.
And of course expect the output to have no prefixes, then.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the section headers/hunk headers we introduced in the previous
commits to the outer diff's hunk headers. This makes it easier to
understand which change we are actually looking at. For example an
outer hunk header might now look like:
@@ Documentation/config/interactive.txt
while previously it would have only been
@@
which doesn't give a lot of context for the change that follows.
For completeness also add section headers for the commit metadata and
the commit message, although they are arguably less important.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a range-diff it's not always clear which file a certain funcname of
the inner diff belongs to, because the diff header (or section header
as added in a previous commit) is not always visible in the
range-diff.
Add the filename to the inner diffs header, so it's always visible to
users.
This also allows us to add the filename + the funcname to the outer
diffs hunk headers using a custom userdiff pattern, which will be done
in the next commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently range-diff keeps the diff header of the inner diff
intact (apart from stripping lines starting with index). This diff
header is somewhat useful, especially when files get different
names in different ranges.
However there is no real need to keep the whole diff header for that.
The main reason we currently do that is probably because it is easy to
do.
Introduce a new range diff hunk header, that's enclosed by "##",
similar to how line numbers in diff hunks are enclosed by "@@", and
give human readable information of what exactly happened to the file,
including the file name.
This improves the readability of the range-diff by giving more concise
information to the users. For example if a file was renamed in one
iteration, but not in another, the diff of the headers would be quite
noisy. However the diff of a single line is concise and should be
easier to understand.
Additionally, this allows us to add these range diff section headers to
the outer diffs hunk headers using a custom userdiff pattern, which
should help making the range-diff more readable.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The line count in the outer diff's hunk headers of a range diff is not
all that interesting. It merely shows how far along the inner diff
are on both sides. That number is of no use for human readers, and
range-diffs are not meant to be machine readable.
In a subsequent commit we're going to add some more contextual
information such as the filename corresponding to the diff to the hunk
headers. Remove the unnecessary information, and just keep the "@@"
to indicate that a new hunk of the outer diff is starting.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When postprocessing the inner diff in range-diff, we currently replace
the whole hunk header line with just "@@". This matches how 'git
tbdiff' used to handle hunk headers as well.
Most likely this is being done because line numbers in the hunk header
are not relevant without other changes. They can for example easily
change if a range is rebased, and lines are added/removed before a
change that we actually care about in our ranges.
However it can still be useful to have the function name that 'git
diff' extracts as additional context for the change.
Note that it is not guaranteed that the hunk header actually shows up
in the range-diff, and this change only aims to improve the case where
a hunk header would already be included in the final output.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently range-diff uses the 'strbuf_getline()' function for doing
its line by line processing. In a future patch we want to do parts of
that parsing using the 'parse_git_diff_header()' function. That
function does its own line by line reading of the input, and doesn't
use strbufs. This doesn't match with how we do the line-by-line
processing in range-diff currently.
Switch range-diff to do our own line by line parsing, so we can re-use
the 'parse_git_diff_header()' function later.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
