| Age | Commit message (Collapse) | Author |
|---|
|
The multi-pack-index code did not protect the packfile it is going
to depend on from getting removed while in use, which has been
corrected.
* tb/midx-race-in-pack-objects:
builtin/pack-objects.c: ensure pack validity from MIDX bitmap objects
builtin/pack-objects.c: ensure included `--stdin-packs` exist
builtin/pack-objects.c: avoid redundant NULL check
pack-bitmap.c: check preferred pack validity when opening MIDX bitmap
|
|
When pack-objects adds an entry to its packing list, it marks the
packfile and offset containing the object, which we may later use during
verbatim reuse (c.f., `write_reused_pack_verbatim()`).
If the packfile in question is deleted in the background (e.g., due to a
concurrent `git repack`), we'll die() as a result of calling use_pack(),
unless we have an open file descriptor on the pack itself. 4c08018204
(pack-objects: protect against disappearing packs, 2011-10-14) worked
around this by opening the pack ahead of time before recording it as a
valid source for reuse.
4c08018204's treatment meant that we could tolerate disappearing packs,
since it ensures we always have an open file descriptor on any pack that
we mark as a valid source for reuse. This tightens the race to only
happen when we need to close an open pack's file descriptor (c.f., the
caller of `packfile.c::get_max_fd_limit()`) _and_ that pack was deleted,
in which case we'll complain that a pack could not be accessed and
die().
The pack bitmap code does this, too, since prior to dc1daacdcc
(pack-bitmap: check pack validity when opening bitmap, 2021-07-23) it
was vulnerable to the same race.
The MIDX bitmap code does not do this, and is vulnerable to the same
race. Apply the same treatment as dc1daacdcc to the routine responsible
for opening the multi-pack bitmap's preferred pack to close this race.
This patch handles the "preferred" pack (c.f., the section
"multi-pack-index reverse indexes" in
Documentation/technical/pack-format.txt) specially, since pack-objects
depends on reusing exact chunks of that pack verbatim in
reuse_partial_packfile_from_bitmap(). So if that pack cannot be loaded,
the utility of a bitmap is significantly diminished.
Similar to dc1daacdcc, we could technically just add this check in
reuse_partial_packfile_from_bitmap(), since it's possible to use a MIDX
.bitmap without needing to open any of its packs. But it's simpler to do
the check as early as possible, covering all direct uses of the
preferred pack. Note that doing this check early requires us to call
prepare_midx_pack() early, too, so move the relevant part of that loop
from load_reverse_index() into open_midx_bitmap_1().
Subsequent patches handle the non-preferred packs in a slightly
different fashion.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all consumers of traverse_commit_list_filtered() populate the
'filter' member of 'struct rev_info', we can drop that parameter from
the method prototype to simplify things. In addition, the only thing
different now between traverse_commit_list_filtered() and
traverse_commit_list() is the presence of the 'omitted' parameter, which
is only non-NULL for one caller. We can consolidate these two methods by
having one call the other and use the simpler form everywhere the
'omitted' parameter would be NULL.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all consumers of prepare_bitmap_walk() have populated the
'filter' member of 'struct rev_info', we can drop that extra parameter
from the method and access it directly from the 'struct rev_info'.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tighten code for testing pack-bitmap.
* jk/test-bitmap-fix:
test_bitmap_hashes(): handle repository without bitmaps
|
|
If prepare_bitmap_git() returns NULL (one easy-to-trigger cause being
that the repository does not have bitmaps at all), then we'll segfault
accessing bitmap_git->hashes:
$ t/helper/test-tool bitmap dump-hashes
Segmentation fault
We should treat this the same as a repository with bitmaps but no
name-hashes, and quietly produce an empty output. The later call to
free_bitmap_index() in the cleanup label is OK, as it treats a NULL
pointer as a noop.
This isn't a big deal in practice, as this function is intended for and
used only by test-tool. It's probably worth fixing to avoid confusion,
but not worth adding coverage for this to the test suite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function free_bitmap_index() is somewhat lax in what it frees. There
are two notable examples:
- While it does call kh_destroy_oid_map on the "bitmaps" map, which
maps commit OIDs to their corresponding bitmaps, the bitmaps
themselves are not freed. Note here that we recycle already-freed
ewah_bitmaps into a pool, but these are handled correctly by
ewah_pool_free().
- We never bother to free the extended index's "positions" map, which
we always allocate in load_bitmap().
Fix both of these.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test_bitmap_walk() is used to implement `git rev-list --test-bitmap`,
which compares the result of the on-disk bitmaps with ones generated
on-the-fly during a revision walk.
In fa95666a40 (pack-bitmap.c: harden 'test_bitmap_walk()' to check type
bitmaps, 2021-08-24), we hardened those tests to also check the four
special type-level bitmaps, but never freed those bitmaps. We should
have, since each required an allocation when we EWAH-decompressed them.
Free those, plugging that leak, and also free the base (the scratch-pad
bitmap), too.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To ask for the name of a MIDX and its corresponding .rev file, callers
invoke get_midx_filename() and get_midx_rev_filename(), respectively.
These both invoke xstrfmt(), allocating a chunk of memory which must be
freed later on.
This makes callers in pack-bitmap.c somewhat awkward. Specifically,
midx_bitmap_filename(), which is implemented like:
return xstrfmt("%s-%s.bitmap",
get_midx_filename(midx->object_dir),
hash_to_hex(get_midx_checksum(midx)));
this leaks the second argument to xstrfmt(), which itself was allocated
with xstrfmt(). This caller could assign both the result of
get_midx_filename() and the outer xstrfmt() to a temporary variable,
remembering to free() the former before returning. But that involves a
wasteful copy.
Instead, get_midx_filename() and get_midx_rev_filename() take a strbuf
as an output parameter. This way midx_bitmap_filename() can manipulate
and pass around a temporary buffer which it detaches back to its caller.
That allows us to implement the function without copying or open-coding
get_midx_filename() in a way that doesn't leak.
Update the other callers of get_midx_filename() and
get_midx_rev_filename() accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
|
|
When repacking into a geometric series and writing a multi-pack bitmap,
it is beneficial to have the largest resulting pack be the preferred
object source in the bitmap's MIDX, since selecting the large packs can
lead to fewer broken delta chains and better compression.
Teach 'git repack' to identify this pack and pass it to the MIDX write
machinery in order to mark it as preferred.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an old bitmap exists while writing a new one, we load it and build
a "reposition" table which maps bit positions of objects from the old
bitmap to their respective positions in the new bitmap. This can help
when we encounter a commit which was selected in both the old and new
bitmap, since we only need to permute its bit (not recompute it from
scratch).
We do not, however, repurpose existing namehash values in the case of
the hash-cache extension. There has been thus far no good reason to do
so, since all of the namehash values for objects in the new bitmap would
be populated during the traversal that was just performed by
pack-objects when generating single-pack reachability bitmaps.
But this isn't the case for multi-pack bitmaps, which are written via
`git multi-pack-index write --bitmap` and do not perform any traversal.
In this case all namehash values are set to zero, but we don't even
bother to check the `pack.writeBitmapHashcache` option anyway, so it
fails to matter.
There are two approaches we could take to fill in non-zero hash-cache
values:
- have either the multi-pack-index builtin run its own
traversal to attempt to fill in some values, or let a hypothetical
caller (like `pack-objects` when `repack` eventually drives the
`multi-pack-index` builtin) fill in the values they found during
their traversal
- or copy any existing namehash values that were stored in an
existing bitmap to their corresponding positions in the new bitmap
In a system where a repository is generally repacked with `git repack
--geometric=<d>` and occasionally repacked with `git repack -a`, the
hash-cache coverage will tend towards all objects.
Since populating the hash-cache is additive (i.e., doing so only helps
our delta search), any intermediate lack of full coverage is just fine.
So let's start by just propagating any values from the existing
hash-cache if we see one.
The next patch will respect the `pack.writeBitmapHashcache` option while
writing MIDX bitmaps, and then test this new behavior.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pack-bitmap writer code is about to learn how to propagate values
from an existing hash-cache. To prepare, teach the test-bitmap helper to
dump the values from a bitmap's hash-cache extension in order to test
those changes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting in commit 0f533c7284 (pack-bitmap: read multi-pack bitmaps,
2021-08-31), we no longer look at the "struct bitmap_index" passed to
try_partial_reuse(). This is because we only handle verbatim reuse from
a single pack: either the pack whose bitmap we're looking at, or the
"preferred" pack of a midx bitmap. And thus the primary item we look at
is the "pack" parameter added by that same commit, and not the
bitmap_git->pack parameter (which would be NULL for a midx bitmap). It's
our caller, reuse_partial_packfile_from_bitmap(), which decides which
pack to use and passes it in to us.
Drop the unused parameter to prevent confusion.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We never look at the repository argument which is passed. This makes
sense, since the multi_pack_index struct already tells us everything we
need to access the files in its associated object directory.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This prepares the code in pack-bitmap to interpret the new multi-pack
bitmaps described in Documentation/technical/bitmap-format.txt, which
mostly involves converting bit positions to accommodate looking them up
in a MIDX.
Note that there are currently no writers who write multi-pack bitmaps,
and that this will be implemented in the subsequent commit. Note also
that get_midx_checksum() and get_midx_filename() are made non-static so
they can be called from pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
try_partial_reuse() is used to mark any bits in the beginning of a
bitmap whose objects can be reused verbatim from the pack they came
from.
Currently this function returns void, and signals nothing to the caller
when bits could not be reused. But multi-pack bitmaps would benefit from
having such a signal, because they may try to pass objects which are in
bounds, but from a pack other than the preferred one.
Any extra calls are noops because of a conditional in
reuse_partial_packfile_from_bitmap(), but those loop iterations can be
avoided by letting try_partial_reuse() indicate when it can't accept any
more bits for reuse, and then listening to that signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a recent commit, pack-objects learned support for the
'pack.preferBitmapTips' configuration. This patch prepares the
multi-pack bitmap code to respect this configuration, too.
The yet-to-be implemented code will find that it is more efficient to
check whether each reference contains a prefix found in the configured
set of values rather than doing an additional traversal.
Implement a function 'bitmap_is_preferred_refname()' which will perform
that check. Its caller will be added in a subsequent patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to fetch the nth OID contained in
the bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A subsequent patch to support reading MIDX bitmaps will be less noisy
after extracting a generic function to return how many objects are
contained in a bitmap.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A race between repacking and using pack bitmaps has been corrected.
* jk/check-pack-valid-before-opening-bitmap:
pack-bitmap: check pack validity when opening bitmap
|
|
In-code comment update.
* tb/bitmap-type-filter-comment-fix:
pack-bitmap: clarify comment in filter_bitmap_exclude_type()
|
|
When pack-objects adds an entry to its list of objects to pack, it may
mark the packfile and offset that contains the file, which we can later
use to output the object verbatim. If the packfile is deleted while we
are running (e.g., by another process running "git repack"), we may die
in use_pack() if the pack file cannot be opened.
We worked around this in 4c08018204 (pack-objects: protect against
disappearing packs, 2011-10-14) by making sure we can open the pack
before recording it as a source. This detects a pack which has already
disappeared while generating the packing list, and because we keep the
pack's file descriptor (or an mmap window) open, it means we can access
it later (unless you exceed core.packedgitlimit).
The bitmap code that was added later does not do this; it adds entries
to the packlist without checking that the packfile is still valid, and
is vulnerable to this race. It needs the same treatment as 4c08018204.
However, rather than add it in just that one spot, it makes more sense
to simply open and check the packfile when we open the bitmap.
Technically you can use the .bitmap without even looking in the .pack
file (e.g., if you are just printing a list of objects without accessing
them), but it's much simpler to do it early. That covers all later
direct uses of the pack (due to the cached descriptor) without having to
check each one directly. For example, in pack-objects we need to protect
the packlist entries, but we also access the pack directly as part of
the reuse_partial_pack_from_bitmap() feature. This patch covers both
cases.
There's no test here, because the problem is inherently racy. I
reproduced and verified the fix with this script:
rm -rf parent.git push.git fetch.git
push() {
(
cd push.git &&
echo content >>file &&
git add file &&
git commit -qm "change $1" &&
git push -q origin HEAD &&
echo "push $1..."
) &&
(
cd parent.git &&
git repack -ad -q &&
echo "repack $1..."
)
}
fetch() {
rm -rf fetch.git &&
git clone -q file://$PWD/parent.git fetch.git &&
echo "fetch $1..."
}
git init --bare parent.git &&
git --git-dir=parent.git config transfer.unpacklimit 1 &&
git clone parent.git push.git &&
(for i in `seq 1 1000`; do push $i || break; done) &
pusher=$!
(for i in `seq 1 1000`; do fetch $i || break; done) &
fetcher=$!
wait $fetcher
kill $pusher
That simulates a race between a client cloning and a push triggering a
repack on the server. Without this patch, it generally fails within a
couple hundred iterations with:
remote: fatal: packfile ./objects/pack/.tmp-1377349-pack-498afdec371232bdb99d1757872f5569331da61e.pack cannot be accessed
error: git upload-pack: git-pack-objects died with error.
fatal: git upload-pack: aborting due to possible repository corruption on the remote side.
remote: aborting due to possible repository corruption on the remote side.
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
With this patch, it reliably runs through all thousand attempts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code that eventually became filter_bitmap_exclude_type() was
originally introduced in 4f3bd5606a (pack-bitmap: implement BLOB_NONE
filtering, 2020-02-14) to accelerate BLOB_NONE filters with bitmaps.
In 856e12c18a (pack-bitmap.c: make object filtering functions generic,
2020-05-04), it became filter_bitmap_exclude_type(). But not all of the
comments were updated to be agnostic to the provided type.
Remove the remaining comments which should have been updated in
856e12c18a to reflect the type-agnostic nature of the function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an object is already mentioned in a reachability bitmap we are
building, then by definition so are all of the objects it can reach. We
have an optimization to stop traversing commits when we see they are
already in the bitmap, but we don't do the same for trees.
It's generally unavoidable to recurse into trees for commits not yet
covered by bitmaps (since most commits generally do have unique
top-level trees). But they usually have subtrees that are shared with
other commits (i.e., all of the subtrees the commit _didn't_ touch). And
some of those commits (and their trees) may be covered by the bitmap.
Usually this isn't _too_ big a deal, because we'll visit those subtrees
only once in total for the whole walk. But if you have a large number of
unbitmapped commits, and if your tree is big, then you may end up
opening a lot of sub-trees for no good reason.
We can use the same optimization we do for commits here: when we are
about to open a tree, see if it's in the bitmap (either the one we are
building, or the "seen" bitmap which covers the UNINTERESTING side of
the bitmap when doing a set-difference).
This works especially well because we'll visit all commits before
hitting any trees. So even in a history like:
A -- B
if "A" has a bitmap on disk but "B" doesn't, we'll already have OR-ed in
the results from A before looking at B's tree (so we really will only
look at trees touched by B).
For most repositories, the timings produced by p5310 are unspectacular.
Here's linux.git:
Test HEAD^ HEAD
--------------------------------------------------------------------
5310.4: simulated clone 6.00(5.90+0.10) 5.98(5.90+0.08) -0.3%
5310.5: simulated fetch 2.98(5.45+0.18) 2.85(5.31+0.18) -4.4%
5310.7: rev-list (commits) 0.32(0.29+0.03) 0.33(0.30+0.03) +3.1%
5310.8: rev-list (objects) 1.48(1.44+0.03) 1.49(1.44+0.05) +0.7%
Any improvement there is within the noise (the +3.1% on test 7 has to be
noise, since we are not recursing into trees, and thus the new code
isn't even run). The results for git.git are likewise uninteresting.
But here are numbers from some other real-world repositories (that are
not public). This one's tree is comparable in size to linux.git, but has
~16k refs (and so less complete bitmap coverage):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.4: simulated clone 38.34(39.86+0.74) 33.95(35.53+0.76) -11.5%
5310.5: simulated fetch 2.29(6.31+0.35) 2.20(5.97+0.41) -3.9%
5310.7: rev-list (commits) 0.99(0.86+0.13) 0.96(0.85+0.11) -3.0%
5310.8: rev-list (objects) 11.32(11.04+0.27) 6.59(6.37+0.21) -41.8%
And here's another with a very large tree (~340k entries), and a fairly
large number of refs (~10k):
Test HEAD^ HEAD
-------------------------------------------------------------------------
5310.3: simulated clone 53.83(54.71+1.54) 39.77(40.76+1.50) -26.1%
5310.4: simulated fetch 19.91(20.11+0.56) 19.79(19.98+0.67) -0.6%
5310.6: rev-list (commits) 0.54(0.44+0.11) 0.51(0.43+0.07) -5.6%
5310.7: rev-list (objects) 24.32(23.59+0.73) 9.85(9.49+0.36) -59.5%
This patch provides substantial improvements in these larger cases, and
have any drawbacks for smaller ones (the cost of the bitmap check is
quite small compared to an actual tree traversal).
Note that we have to add a version of revision.c's include_check
callback which handles non-commits. We could possibly consolidate this
into a single callback for all objects types, as there's only one user
of the feature which would need converted (pack-bitmap.c:should_include).
That would in theory let us avoid duplicating any logic. But when I
tried it, the code ended up much worse to read, with lots of repeated
"if it's a commit do this, otherwise do that". Having two separate
callbacks splits that naturally, and matches the existing split of
show_commit/show_object callbacks.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-list" learns the "--filter=object:type=<type>" option,
which can be used to exclude objects of the given kind from the
packfile generated by pack-objects.
* ps/rev-list-object-type-filter:
rev-list: allow filtering of provided items
pack-bitmap: implement combined filter
pack-bitmap: implement object type filter
list-objects: implement object type filter
list-objects: support filtering by tag and commit
list-objects: move tag processing into its own function
revision: mark commit parents as NOT_USER_GIVEN
uploadpack.txt: document implication of `uploadpackfilter.allow`
|
|
When the reachability bitmap is in effect, the "do not lose
recently created objects and those that are reachable from them"
safety to protect us from races were disabled by mistake, which has
been corrected.
* jk/prune-with-bitmap-fix:
prune: save reachable-from-recent objects with bitmaps
pack-bitmap: clean up include_check after use
|
|
When a bitmap walk has to traverse (to fill in non-bitmapped objects),
we use rev_info's include_check mechanism to let us stop the traversal
early. But after setting the function and its data parameter, we never
clean it up. This means that if the rev_info is used for a subsequent
traversal without bitmaps, it will unexpectedly call into our
include_check function (worse, it will do so pointing to a now-defunct
stack variable in include_check_data, likely resulting in a segfault).
There's no code which does this now, but it's an accident waiting to
happen. Let's clean up after ourselves in the bitmap code.
Reported-by: David Emett <dave@sp4m.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When providing an object filter, it is currently impossible to also
filter provided items. E.g. when executing `git rev-list HEAD` , the
commit this reference points to will be treated as user-provided and is
thus excluded from the filtering mechanism. This makes it harder than
necessary to properly use the new `--filter=object:type` filter given
that even if the user wants to only see blobs, he'll still see commits
of provided references.
Improve this by introducing a new `--filter-provided-objects` option
to the git-rev-parse(1) command. If given, then all user-provided
references will be subject to filtering.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user has multiple objects filters specified, then this is
internally represented by having a "combined" filter. These combined
filters aren't yet supported by bitmap indices and can thus not be
accelerated.
Fix this by implementing support for these combined filters. The
implementation is quite trivial: when there's a combined filter, we
simply recurse into `filter_bitmap()` for all of the sub-filters.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The preceding commit has added a new object filter for git-rev-list(1)
which allows to filter objects by type. Implement the equivalent filter
for packfile bitmaps so that we can answer these queries fast.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A configuration variable has been added to force tips of certain
refs to be given a reachability bitmap.
* tb/pack-preferred-tips-to-give-bitmap:
builtin/pack-objects.c: respect 'pack.preferBitmapTips'
t/helper/test-bitmap.c: initial commit
pack-bitmap: add 'test_bitmap_commits()' helper
|
|
Optimize "rev-list --use-bitmap-index --objects" corner case that
uses negative tags as the stopping points.
* ps/pack-bitmap-optim:
pack-bitmap: avoid traversal of objects referenced by uninteresting tag
|
|
When writing a new pack with a bitmap, it is sometimes convenient to
indicate some reference prefixes which should receive priority when
selecting which commits to receive bitmaps.
A truly motivated caller could accomplish this by setting
'pack.islandCore', (since all commits in the core island are similarly
marked as preferred) but this requires callers to opt into using delta
islands, which they may or may not want to do.
Introduce a new multi-valued configuration, 'pack.preferBitmapTips' to
allow callers to specify a list of reference prefixes. All references
which have a prefix contained in 'pack.preferBitmapTips' will mark their
tips as "preferred" in the same way as commits are marked as preferred
for selection by 'pack.islandCore'.
The choice of the verb "prefer" is intentional: marking the NEEDS_BITMAP
flag on an object does *not* guarantee that that object will receive a
bitmap. It merely guarantees that that commit will receive a bitmap over
any *other* commit in the same window by bitmap_writer_select_commits().
The test this patch adds reflects this quirk, too. It only tests that
a commit (which didn't receive bitmaps by default) is selected for
bitmaps after changing the value of 'pack.preferBitmapTips' to include
it. Other commits may lose their bitmaps as a byproduct of how the
selection process works (bitmap_writer_select_commits() ignores the
remainder of a window after seeing a commit with the NEEDS_BITMAP flag).
This configuration will aide in selecting important references for
multi-pack bitmaps, since they do not respect the same pack.islandCore
configuration. (They could, but doing so may be confusing, since it is
packs--not bitmaps--which are influenced by the delta-islands
configuration).
In a fork network repository (one which lists all forks of a given
repository as remotes), for example, it is useful to set
pack.preferBitmapTips to 'refs/remotes/<root>/heads' and
'refs/remotes/<root>/tags', where '<root>' is an opaque identifier
referring to the repository which is at the base of the fork chain.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next patch will add a 'bitmap' test-tool which prints the list of
commits that have bitmaps computed.
The test helper could implement this itself, but it would need access to
the 'bitmaps' field of the 'pack_bitmap' struct. To avoid exposing this
private detail, implement the entirety of the helper behind a
test_bitmap_commits() function in pack-bitmap.c.
There is some precedence for this with test_bitmap_walk() which is used
to implement the '--test-bitmap' flag in 'git rev-list' (and is also
implemented in pack-bitmap.c).
A caller will be added in the next patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When preparing the bitmap walk, we first establish the set of of have
and want objects by iterating over the set of pending objects: if an
object is marked as uninteresting, it's declared as an object we already
have, otherwise as an object we want. These two sets are then used to
compute which transitively referenced objects we need to obtain.
One special case here are tag objects: when a tag is requested, we
resolve it to its first not-tag object and add both resolved objects as
well as the tag itself into either the have or want set. Given that the
uninteresting-property always propagates to referenced objects, it is
clear that if the tag is uninteresting, so are its children and vice
versa. But we fail to propagate the flag, which effectively means that
referenced objects will always be interesting except for the case where
they have already been marked as uninteresting explicitly.
This mislabeling does not impact correctness: we now have it in our
"wants" set, and given that we later do an `AND NOT` of the bitmaps of
"wants" and "haves" sets it is clear that the result must be the same.
But we now start to needlessly traverse the tag's referenced objects in
case it is uninteresting, even though we know that each referenced
object will be uninteresting anyway. In the worst case, this can lead to
a complete graph walk just to establish that we do not care for any
object.
Fix the issue by propagating the `UNINTERESTING` flag to pointees of tag
objects and add a benchmark with negative revisions to p5310. This shows
some nice performance benefits, tested with linux.git:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------------------------------
5310.3: repack to disk 193.18(181.46+16.42) 194.61(183.41+15.83) +0.7%
5310.4: simulated clone 25.93(24.88+1.05) 25.81(24.73+1.08) -0.5%
5310.5: simulated fetch 2.64(5.30+0.69) 2.59(5.16+0.65) -1.9%
5310.6: pack to file (bitmap) 58.75(57.56+6.30) 58.29(57.61+5.73) -0.8%
5310.7: rev-list (commits) 1.45(1.18+0.26) 1.46(1.22+0.24) +0.7%
5310.8: rev-list (objects) 15.35(14.22+1.13) 15.30(14.23+1.07) -0.3%
5310.9: rev-list with tag negated via --not --all (objects) 22.49(20.93+1.56) 0.11(0.09+0.01) -99.5%
5310.10: rev-list with negative tag (objects) 0.61(0.44+0.16) 0.51(0.35+0.16) -16.4%
5310.11: rev-list count with blob:none 12.15(11.19+0.96) 12.18(11.19+0.99) +0.2%
5310.12: rev-list count with blob:limit=1k 17.77(15.71+2.06) 17.75(15.63+2.12) -0.1%
5310.13: rev-list count with tree:0 1.69(1.31+0.38) 1.68(1.28+0.39) -0.6%
5310.14: simulated partial clone 20.14(19.15+0.98) 19.98(18.93+1.05) -0.8%
5310.16: clone (partial bitmap) 12.78(13.89+1.07) 12.72(13.99+1.01) -0.5%
5310.17: pack to file (partial bitmap) 42.07(45.44+2.72) 41.44(44.66+2.80) -1.5%
5310.18: rev-list with tree filter (partial bitmap) 0.44(0.29+0.15) 0.46(0.32+0.14) +4.5%
While most benchmarks are probably in the range of noise, the newly
added 5310.9 and 5310.10 benchmarks consistenly perform better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can sometimes be useful to see which refs are contributing to the
overall repository size (e.g., does some branch have a bunch of objects
not found elsewhere in history, which indicates that deleting it would
shrink the size of a clone).
You can find that out by generating a list of objects, getting their
sizes from cat-file, and then summing them, like:
git rev-list --objects --no-object-names main..branch
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
Though note that the caveats from git-cat-file(1) apply here. We "blame"
base objects more than their deltas, even though the relationship could
easily be flipped. Still, it can be a useful rough measure.
But one problem is that it's slow to run. Teaching rev-list to sum up
the sizes can be much faster for two reasons:
1. It skips all of the piping of object names and sizes.
2. If bitmaps are in use, for objects that are in the
bitmapped packfile we can skip the oid_object_info()
lookup entirely, and just ask the revindex for the
on-disk size.
This patch implements a --disk-usage option which produces the same
answer in a fraction of the time. Here are some timings using a clone of
torvalds/linux:
[rev-list piped to cat-file, no bitmaps]
$ time git rev-list --objects --no-object-names --all |
git cat-file --buffer --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m29.635s
user 0m38.003s
sys 0m1.093s
[internal, no bitmaps]
$ time git rev-list --disk-usage --objects --all
1459938510
real 0m31.262s
user 0m30.885s
sys 0m0.376s
Even though the wall-clock time is slightly worse due to parallelism,
notice the CPU savings between the two. We saved 21% of the CPU just by
avoiding the pipes.
But the real win is with bitmaps. If we use them without the new option:
[rev-list piped to cat-file, bitmaps]
$ time git rev-list --objects --no-object-names --all --use-bitmap-index |
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m6.244s
user 0m8.452s
sys 0m0.311s
then we're faster to generate the list of objects, but we still spend a
lot of time piping and looking things up. But if we do both together:
[internal, bitmaps]
$ time git rev-list --disk-usage --objects --all --use-bitmap-index
1459938510
real 0m0.219s
user 0m0.169s
sys 0m0.049s
then we get the same answer much faster.
For "--all", that answer will correspond closely to "du objects/pack",
of course. But we're actually checking reachability here, so we're still
fast when we ask for more interesting things:
$ time git rev-list --disk-usage --use-bitmap-index v5.0..v5.10
374798628
real 0m0.429s
user 0m0.356s
sys 0m0.072s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove another instance of looking at the revindex directly by instead
calling 'pack_pos_to_index()'. Unlike other patches, this caller only
cares about the index position of each object in the loop.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove another instance of direct revindex manipulation by calling
'pack_pos_to_offset()' instead (the caller here does not care about the
index position of the object at position 'pos').
Note that we cannot just use the existing "offset" variable to store the
value we get from pack_pos_to_offset(). It is incremented by
unpack_object_header(), but we later need the original value. Since
we'll no longer have revindex->offset to read it from, we'll store that
in a separate variable ("header" since it points to the entry's header
bytes).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove another caller that holds onto a 'struct revindex_entry' by
replacing the direct indexing with calls to 'pack_pos_to_offset()' and
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid storing the revindex entry directly, since this structure will
soon be removed from the public interface. Instead, store the offset and
index position by calling 'pack_pos_to_offset()' and
'pack_pos_to_index()', respectively.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace find_revindex_position() with its counterpart in the new API,
offset_to_pack_pos().
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'find_objects()' currently needs to interact with the bitmaps khash
pretty closely. To make 'find_objects()' read a little more
straightforwardly, remove some of the khash-level details into a new
function that describes what it does: 'add_commit_to_bitmap()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of callers within pack-bitmap.c duplicate logic to lookup a
given object id in the bitamps khash. Factor this out into a new
function, 'bitmap_for_commit()' to reduce some code duplication.
Make this new function non-static, since it will be used in later
commits from outside of pack-bitmap.c.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
