| Age | Commit message (Collapse) | Author |
|---|
|
This reinstates an old optimization in .rev_db which
stored the highest revision number we scanned, allowing
us to avoid scanning the SVN log for those revisions
again in a subsequent invocation.
This means the last 24-byte record in a .rev_map file
can be a 4-byte SVN revision number with 20-bytes of
zeroes representing a non-existent commit. This record
can and will be overwritten when a new commit iff
the commit is all zeroes.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Migrations are done automatically on an as-needed basis when new
revisions are to be fetched. Stale remote branches do not get
migrated, yet.
However, unless you set noMetadata or useSvkProps it's safe to
just do:
find $GIT_DIR/svn -name '.rev_db*' -print0 | xargs rm -f
to purge all the old .rev_db files.
The new format is a one-way migration and is NOT compatible with
old versions of git-svn.
This is the replacement for the rev_db format, which was too big
and inefficient for large repositories with a lot of sparse history
(mainly tags).
The format is this:
- 24 bytes for every record,
* 4 bytes for the integer representing an SVN revision number
* 20 bytes representing the sha1 of a git commit
- No empty padding records like the old format
- new records are written append-only since SVN revision numbers
increase monotonically
- lookups on SVN revision number are done via a binary search
- Piping the file to xxd(1) -c24 is a good way of dumping it for
viewing or editing, should the need ever arise.
As with .rev_db, these files are disposable unless noMetadata or
useSvmProps is set.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "git-svn rebase" while sitting on a topic branch, there is
no need to create a "master" branch if one didn't exist already. The
branch was created implicitly by the automatic checkout after fetching,
which in the case of rebase isn't actually necessary anyway.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
show-externals can be used by scripts to provide svn:externals-like
functionality. For example, a script can list all of the externals and then
use check out the listed URLs at the appropriate paths, similar to what the svn
client does. Said script (or perhaps git-svn itself, in the future) could
simply invoke svn export on the paths, or it could go one further, using
git-svn clone and even git-submodule together to better integrate externals
checkouts.
The implementation is shamelessly copied from show-ignores. A more general
command to list user-specified properties is probably a better idea.
Signed-off-by: Vineet Kumar <vineet@doorstop.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Digest::MD5 is loaded regardless of the package in which it's
declared, so move its 'use' statement and the md5sum() function
into the main package.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Add support for pulling the real author of a commit from the From:
and first Signed-off-by: fields of the SVN commit message.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Previously, git-svn first read the .git/config file for settings as if
current working directory was the repository top-directory, and after
that made sure to cd into top-directory. The result was a silent
failur to read configuration settings. This patch changes the order
these two things are done.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Cache the repository root whenever we connect to the repository.
This will allow us to notice URL changes if the user changes the
URL in .git/config, too.
If the repository is no longer accessible, or if `git svn info'
is the first and only command run; then '(offline)' will be
displayed for "Repository Root:" in the output.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Return the svn URL for the given path, or return the svn
repository URL if no path is given.
Added 18 tests to t/t9119-git-svn-info.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Implement "git-svn info" for files and directories based on the
"svn info" command. Note that the -r/--revision argument is not
supported yet.
Added 18 tests in t/t9119-git-svn-info.sh.
[ew: small fix to work without arguments on all working directories]
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Extacted canonicalize_path() in the main package.
Created new Git::SVN::Util package with an md5sum() function. A
new package was created so that Digest::MD5 did not have to be
loaded in the main package. Replaced code in the SVN::Git::Editor
and SVN::Git::Fetcher packages with calls to md5sum().
Extracted the format_svn_date(), parse_git_date() and
set_local_timezone() functions within the Git::SVN::Log package.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Signed-off-by: David Reiss <dreiss@facebook.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
When unreachable revisions are given to "svn log", it displays all commit
logs in the given range that exist in the current tree. (If no commit
logs are found in the current tree, it simply prints a single commit log
separator.) This patch makes "git-svn log" behave the same way.
Ten tests added to t/t9116-git-svn-log.sh.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The "svn log -rM:N" command shows commit logs inclusive in the range [M,N].
Previously "git-svn log" always excluded the commit log for the smallest
revision in a range, whether the range was ascending or descending. With
this patch, the smallest revision in a range is always shown.
Updated tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
Fixed typo in Git::SVN::Log::git_svn_log_cmd(). Previously a command like
"git-svn log -r1:4" would only show a commit log separator.
Added tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
When doing dcommit git-svn must use subversion's config or newly created
files will not include svn's properties
(defined in [auto-props] with 'enable-auto-props = yes').
Signed-off-by: Konstantin V. Arkhipov <voxus@onphp.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
SVN requires that paths be URI-escaped for HTTP(S) repositories.
file:// and svn:// repositories do not need these rules.
Additionally, accessing individual paths inside repositories
(check_path() and get_log() do NOT require escapes to function
and in fact it breaks things).
Noticed-by: Michael J. Cohen <mjc@cruiseplanners.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
|
|
dcommit uses rebase to sync the history with what has just been pushed to
SVN. Trying to dcommit with a dirty index is troublesome for rebase, so now
the user will get an error message if he attempts to dcommit with a dirty
index.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Remove a couple of duplicated include
grep with unmerged index
git-daemon: fix remote port number in log entry
git-svn: t9114: verify merge commit message in test
git-svn: fix dcommit clobbering when committing a series of diffs
|
|
Our revision number sent to SVN is set to the last revision we
committed if we've made any previous commits in a dcommit
invocation.
Although our SVN Editor code uses the delta of two (old) trees
to generate information to send upstream, it'll still send
complete resultant files upstream; even if the tree they're
based against is out-of-date.
The combination of sending a file that does not include the
latest changes, but set with a revision number of a commit we
just made will cause SVN to accept the resultant file even if it
was generated against an old tree.
More trouble was caused when fixing this because we were
rebasing uncessarily at times. We used git-diff-tree to check
the imported SVN revision against our HEAD, not the last tree we
committed to SVN. The unnecessary rebasing caused merge commits
upstream to SVN to fail.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git svn <cmd> --help" gave options in the order they were found in a
Perl hash, which meant "randomly" to humans.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git-svn.perl (&fatal): Append the newline at the end of the error
message.
Adjust all callers.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This allows one to easily retrieve a list of svn properties from within
git-svn without requiring svn or knowing the URL of a repository.
* git-svn.perl (%cmd): Add the command `proplist'.
(&cmd_proplist): New.
* t/t9101-git-svn-props.sh: Test git svn proplist.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This allows one to easily retrieve a single SVN property from within
git-svn without requiring svn or remembering the URL of a repository
* git-svn.perl (%cmd): Add the new command `propget'.
($cmd_dir_prefix): New global.
(&get_svnprops): New helper.
(&cmd_propget): New. Use &get_svnprops.
* t/t9101-git-svn-props.sh: Add a test case for propget.
[ew: make sure the rev-parse --show-prefix call doesn't break
the `git-svn clone' command]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
git svn create-ignore (to create one .gitignore per directory
from the svn:ignore properties. This has the disadvantage of
committing the .gitignore during the next dcommit, but when you
import a repo with tons of ignores (>1000), using git svn show-ignore
to build .git/info/exclude is *not* a good idea, because things like
git-status will end up doing >1000 fnmatch *per file* in the repo,
which leads to git-status taking more than 4s on my Core2Duo 2Ghz 2G
RAM)
* git-svn.perl (%cmd): Add the new command `create-ignore'.
(&cmd_create_ignore): New.
* t/t9101-git-svn-props.sh: Adjust the test-case for show-ignore and
add a test case for create-ignore.
[ew: added commit message from
<05CAB148-56ED-4FF1-8AAB-4BA2A0B70C2C@lrde.epita.fr> ]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* git-svn.perl (&traverse_ignore): Remove.
(&prop_walk): New.
(&cmd_show_ignore): Use prop_walk.
[ew: This will ease the implementation of the `create-ignore',
`propget', and `proplist' commands]
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Some variables coming from the Subversion's Perl bindings are used
in our code only once, so the interpreter warns us about it. These
warnings are false-positives, because the variables themselves are
initialized in the binding's guts, that are made by SWIG.
Credits to Sam Vilain for his note about "no warnings 'once'".
[ew: minor formatting change]
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Parameters 'store-passwords' and 'store-auth-creds' from Subversion's
configuration (~/.subversion/config) were not respected. This was
fixed: the default values for these parameters are set to 'yes' to
follow Subversion behaviour.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
In most cases of branching, the tree is copied unmodified from the trunk
to the branch. When that is done, we can simply start with the parent's
index and apply the changes on the branch as usual.
[ew: rewritten from Steven's original to use SVN::Client instead
of the command-line svn client.
Since SVN::Client connects separately, we'll share our
authentication providers array between our usages of
SVN::Client and SVN::Ra, too. Bypassing the high-level
SVN::Client library can avoid this, but the code will be
much more complex. Regardless, any implementation of this
seems to require restarting a connection to the remote
server.
Also of note is that SVN 1.4 and later allows a more
efficient diff_summary to be done instead of a full diff,
but since this code is only to support SVN < 1.4.4, we'll
ignore it for now.]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
|
|
Even though config_pager() unset the $pager variable, we were
blindly calling exec() on it through run_pager().
Noticed-by: Chris Moore <christopher.ian.moore@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lh/svn-first-parent:
git-svn: always use --first-parent
git-svn: add support for --first-parent
|
|
Use the rev-list --parents functionality to read the parents
of the commit. cat-file only shows the raw object with the
original parents and doesn't take into account grafts; so
we'll rely on rev-list machinery for the smarts here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a workaround for the reparent function not working
correctly on the SVN native protocol servers. This workaround
opens a new connection (SVN::Ra object) to the new
URL/directory.
Since libsvn appears limited to only supporting one connection
at a time, this workaround invalidates the Git::SVN::Ra object
that is $self inside gs_fetch_loop_common(). So we need to
restart that connection once all the fetching is done for each
loop iteration to be able to run get_log() successfully.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes git-svn unconditionally invoke git-log with --first-parent when
it is trying to discover its upstream subversion branch and collecting the
commit ids which should be pushed to it with dcommit. The reason for always
using --first-parent is to make git-svn behave in a predictable way when the
ancestry chain contains merges with other git-svn branches.
Since git-svn now always uses 'git-log --first-parent' there is no longer
any need for the --first-parent option to git-svn, so this is removed.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-svn uses git-log to find embedded 'git-svn-id'-lines in commit
messages, it can get confused when local history contains merges with
other git-svn branches. But if --first-parent is supplied to git-log,
working_head_info() will only see 'branch-local' commits and thus the
first commit containing a 'git-svn-id' line should refer to the correct
subversion branch.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although dcommit could detect if the first commit in the series
would conflict with the HEAD revision in SVN, it could not
detect conflicts in further commits it made.
Now we rebase each uncommitted change after each revision is
committed to SVN to ensure that we are up-to-date. git-rebase
will bail out on conflict errors if our next change cannot be
applied and committed to SVN cleanly, preventing accidental
clobbering of changes on the SVN-side.
--no-rebase users will have trouble with this, and are thus
warned if they are committing more than one commit. Fixing this
for (hopefully uncommon) --no-rebase users would be more complex
and will probably happen at a later date.
Thanks to David Watson for finding this and the original test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the configuration of the user has "diff.color = true", the
output from "log" we invoke internally added color codes, which
broke the parser.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
|
|
The --stdlayout option to git-svn init/clone initialises the default
Subversion values of trunk,tags,branches: -T trunk -b branches -t tags.
If any of the -T/-t/-b options are given in addition, they are given
preference.
[ew: fixed whitespace and added "-s" shortcut]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
This will print out the URL that dcommit will operate on.
If used with --dry-run this will print out the URL without
making changes to the repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
Running git-svn log <ref> -r<rev> against a <ref> other than the
current HEAD did not work if the <rev> was exclusive to the
other branch.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git some characters are invalid as documented
in git-check-ref-format. In subversion these characters might
be valid, so a translation is required.
This patch does this translation by url escaping characters, that
are not allowed.
Credit goes to Eric Wong, martin f. krafft and Jan Hudec
Signed-off-by: Robert Ewald <robewald@gmx.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Changed filter for username in svn-authors file, so even 'user name' is accepted.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Renaming files with non-URI friendly characters caused
breakage when committing to DAV repositories (over http(s)).
Even if I try leaving out the $self->{url} from the return value
of url_path(), a partial (without host), unescaped path name
does not work.
Filenames for DAV repos need to be URI-encoded before being
passed to the library. Since this bug did not affect file://
and svn:// repos, the git-svn test library needed to be expanded
to include support for starting Apache with mod_dav_svn enabled.
This new test is not enabled by default, but can be enabled by
setting SVN_HTTPD_PORT to any available TCP/IP port on
127.0.0.1.
Additionally, for running this test, the following variables
(with defaults shown) can be changed for the suitable system.
The default values are set for Debian systems:
SVN_HTTPD_MODULE_PATH=/usr/lib/apache2/modules
SVN_HTTPD_PATH=/usr/sbin/apache2
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We were previously sensitive to leading slashes in the fetch
lines and incorrectly writing them to the config if the user
used them (needlessly) in the command-line.
This fixes the issue and allows us to play nicely with legacy
configs that have leading slashes in fetch lines.
Thanks to Bradford Smith for figuring this out for me:
>
> This works:
>
> git-svn clone https://my.server.net/repos/path/ -Ttrunk/testing
> -ttags/testing -bbranches/testing testing
>
> This doesn't:
>
> git-svn clone https://my.server.net/repos/path -T/trunk/testing
> -t/tags/testing -b/branches/testing testing
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We now explicitly disconnect before starting new SVN::Ra
connections. SVN::Ra objects will automatically be disconnected
from the server on DESTROY.
SVN servers seem to have problems accepting multiple connections
from one client, and the SVN library has trouble being connected
to multiple servers at once. This appears to cause opening the
second connection to block, and cause git-svn to be unusable
after using the do_switch() function.
git-svn opens another connection because a workaround is
necesary for the buggy reparent function handling on certain
versions of svn:// and svn+ssh:// servers. Instead of using the
reparent function (analogous to chdir), it will reopen a new
connection to a different URL on the SVN server.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ew/svn:
git-svn: allow dcommit to retain local merge information
|
|
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
|
|
* mk/svn:
git-svn: honor ~/.subversion/ client cert file settings.
|
