| Age | Commit message (Collapse) | Author |
|---|
|
Variable type fix.
* cb/fsmonitor-intfix:
fsmonitor: avoid signed integer overflow / infinite loop
|
|
883e248b8a ("fsmonitor: teach git to optionally utilize a file system
monitor to speed up detecting new or changed files.", 2017-09-22) uses
an int in a loop that would wrap if index_state->cache_nr (unsigned)
is bigger than INT_MAX
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this change, the `index_state` struct becomes the new home for the
flag that says whether the fsmonitor hook has been run, i.e. it is now
per-index.
It also gets re-set when the index is discarded, fixing the bug
demonstrated by the "test_expect_failure" test added in the preceding
commit. In that case fsmonitor-enabled Git would miss updates under
certain circumstances, see that preceding commit for details.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
|
|
Avoid magic array sizes and indexes by constructing the fsmonitor
command line using the embedded argv_array of the child_process. The
resulting code is shorter and easier to extend.
Getting rid of the snprintf() calls is a bonus -- even though the
buffers were big enough here to avoid truncation -- as it makes auditing
the remaining callers easier.
Inspired-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index file is updated to record the fsmonitor section after a
full scan was made, to avoid wasting the effort that has already
spent.
* bp/fsmonitor-prime-index:
fsmonitor: force index write after full scan
|
|
Fix an unexploitable (because the oversized contents are not under
attacker's control) buffer overflow.
* bp/fsmonitor-bufsize-fix:
fsmonitor: fix incorrect buffer size when printing version number
|
|
fsmonitor currently only flags the index as dirty if the extension is being
added or removed. This is a performance optimization that recognizes you can
stat() a lot of files in less time than it takes to write out an updated index.
This patch makes a small enhancement and flags the index dirty if we end up
having to stat() all files and scan the entire working directory. The assumption
being that must be expensive or you would not have turned on the feature.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a trivial bug fix for passing the incorrect size to snprintf() when
outputting the version. It should be passing the size of the destination buffer
rather than the size of the value being printed.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
ba1b9cac ("fsmonitor: delay updating state until after split index
is merged", 2017-10-27) resolved the problem of the fsmonitor data
being applied to the non-base index when reading; however, a similar
problem exists when writing the index. Specifically, writing of the
fsmonitor extension happens only after the work to split the index
has been applied -- as such, the information in the index is only
for the non-"base" index, and thus the extension information
contains only partial data.
When saving, compute the ewah bitmap before the index is split, and
store it in the fsmonitor_dirty field, mirroring the behavior that
occurred during reading. fsmonitor_dirty is kept from being leaked by
being freed when the extension data is written -- which always happens
precisely once, no matter the split index configuration.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the fsmonitor extension is used in conjunction with the split index
extension, the set of entries in the index when it is first loaded is
only a subset of the real index. This leads to only the non-"base"
index being marked as CE_FSMONITOR_VALID.
Delay the expansion of the ewah bitmap until after tweak_split_index
has been called to merge in the base index as well.
The new fsmonitor_dirty is kept from being leaked by dint of being
cleaned up in post_read_index_from, which is guaranteed to be called
after do_read_index in read_index_from.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsmonitor command inherits the PWD of its caller, which may be
anywhere in the working copy. This makes is difficult for the
fsmonitor command to operate on the whole repository. Specifically,
for the watchman integration, this causes each subdirectory to get its
own watch entry.
Set the CWD to the top of the working directory, for consistency.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
detecting new or changed files.
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
