| Age | Commit message (Collapse) | Author |
|---|
|
make install DESTDIR=... support for git/contrib/emacs
Signed-off-by: Ville Skyttä <scop@xemacs.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
$ git grep post-receieve-email
$ git grep post-receive-email
templates/hooks--post-receive:#. /usr/share/doc/git-core/contrib/hooks/post-receive-email
$
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add a simple script to create a working directory that uses symlinks
to point at an exisiting repository. This allows having different
branches in different working directories but all from the same
repository.
Based on a description from Junio of how he creates multiple working
directories[1]. With the following caveat:
"This risks confusion for an uninitiated if you update a ref that
is checked out in another working tree, but modulo that caveat
it works reasonably well."
[1] http://article.gmane.org/gmane.comp.version-control.git/41513/
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The update hook is no longer the correct place to generate emails; there
is now the hooks/post-receive script which is run automatically after a
ref has been updated.
This patch is to make use of that new location, and to address some
faults in the old update hook.
The primary problem in the conversion was that in the update hook, the
ref has not actually been changed, but is about to be. In the
post-receive hook the ref has already been updated. That meant that
where we previously had lines like:
git rev-list --not --all
would now give the wrong list because "--all" in the post-receive hook
includes the ref that we are making the email for. This made it more
difficult to show only the new revisions added by this update.
The solution is not pretty; however it does work and doesn't need any
changes to git-rev-list itself. It also fixes (more accurately: reduces
the likelihood of) a nasty race when another update occurs while this
script is running. The solution, in short, looks like this (see the
source code for a longer explanation)
git rev-parse --not --all | grep -v $(git rev-parse $refname) |
git rev-list --pretty --stdin $oldrev..$newrev
This uses git-rev-parse followed by grep to filter out the revision of
the ref in question before it gets to rev-list and inhibits the output
of itself. By using $(git rev-parse $revname) rather than $newrev as the
filter, it also takes care of the situation where another update to the
same ref has been made since $refname was $newrev.
The second problem that is addressed is that of tags inhibiting the
correct output of an update email. Consider this, with somebranch and
sometag pointing at the same revision:
git push origin somebranch
git push origin sometag
That would work fine; the push of the branch would generate an email
containing all the new commits introduced by the update, then the push
of the tag would generate the shortlog formatted tag email. Now
consider:
git push origin sometag
git push origin somebranch
When some branch comes to run its "--not --all" line, it will find
sometag, and filter those commits from the email - leaving nothing.
That meant that those commits would not show (in full) on any email.
The fix is to not use "--all", and instead use "--branches" in the
git-rev-parse command.
Other changes
* Lose the monstrous one-giant-script layout and put things in easy to
digest functions. This makes it much easier to find the place you
need to change if you wanted to customise the output. I've also
tried to write more verbose comments for the same reason. The hook
script is big, mainly because of all the different cases that it has
to handle, so being easy to navigate is important.
* All uses of "git-command" changed to "git command", to cope better
if a user decided not to install all the hard links to git;
* Cleaned up some of the English in the email
* The fact that the receive hook makes the ref available also allows me
to use Shawn Pearce's fantastic suggestion that an annotated tag can
be parsed with git-for-each-ref. This removes the potentially
non-portable use of "<<<" heredocs and the nasty messing around with
"date" to convert numbers of seconds UTC to a real date
* Deletions are now caught and notified (briefly)
* To help with debugging, I've retained the command line mode from the
update hook; but made it so that the output is not emailed, it's just
printed to the screen. This could then be redirected if the user
wanted
* Removed the "Hello" from the beginning of the email - it's just
noise, and no one seriously has their day made happier by "friendly"
programs
* The fact that it doesn't rely on repository state as an indicator any
more means that it's far more stable in its output; hopefully the
same arguments will always generate the same email - even if the
repository changes in the future. This means you can easily recreate
an email should you want to.
* Included Jim Meyering's envelope sender option for the sendmail call
* The hook is now so big that it was inappropriate to copy it
to every repository by keeping it in the templates directory.
Instead, I've put a comment saying to look in contrib/hooks, and
given an example of calling the script from that template hook. The
advantage of calling the script residing at some fixed location is
that if a future package of git included a bug fixed version of the
script, that would be picked up automatically, and the user would not
have to notice and manually copy the new hook to every repository
that uses it.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Use git-log --pretty=oneline to print a short description of the
current HEAD (and merge heads if any) in the buffer header.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a simple but powerful continuous integration build system
for Git. It works by receiving push events from repositories
through the post-receive hook, aggregates them on a per-branch
basis into a first-come-first-serve build queue, and lets a
background build daemon perform builds one at a time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Run the pre-commit and post-commit hooks at appropriate places, and
display their output if any.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
git.el: Retrieve commit log information from .dotest directory.
git.el: Avoid appending a signoff line that is already present.
setup_git_directory_gently: fix off-by-one error
user-manual: install user manual stylesheet with other web documents
user-manual: fix rendering of history diagrams
user-manual: fix missing colon in git-show example
user-manual: fix inconsistent use of pull and merge
user-manual: fix inconsistent example
glossary: fix overoptimistic automatic linking of defined terms
Documentation: s/seperator/separator/
Adjust reflog filemode in shared repository
|
|
If a git-am or git-rebase is in progress, fill the commit log buffer
from the commit information found in the various files in the .dotest
directory.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also avoid inserting an extra newline if other signoff lines are
present.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add git-blame as a candidate to the byte-compilation.
batch-byte-compile is the prefered way to byte-compile files in
batch mode. Use it instead of the interactive function.
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Start preparing Release Notes for 1.5.0.3
Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name url
Include config.mak in doc/Makefile
git.el: Set the default commit coding system from the repository config.
git-archimport: support empty summaries, put summary on a single line.
http-push.c::lock_remote(): validate all remote refs.
git-cvsexportcommit: don't cleanup .msg if not yet committed to cvs.
|
|
If not otherwise specified, take the default coding system for commits
from the 'i18n.commitencoding' repository configuration value.
Also set the buffer-file-coding-system variable in the log buffer to
make the selected coding system visible on the modeline.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
builtin-fmt-merge-msg: fix bugs in --file option
index-pack: Loop over pread until data loading is complete.
blameview: Fix the browse behavior in blameview
Fix minor typos/grammar in user-manual.txt
Correct ordering in git-cvsimport's option documentation
git-show: Reject native ref
Fix git-show man page formatting in the EXAMPLES section
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Use gunzip -c over gzcat in import-tars example.
git-gui: Don't crash in citool mode on initial commit.
git-gui: Remove TODO list.
git-gui: Include browser in our usage message.
git-gui: Change summary of git-gui.
git-gui: Display all authors of git-gui.
git-gui: Use mixed path for docs on Cygwin.
git-gui: Correct crash when saving options in blame mode.
git-gui: Expose the browser as a subcommand.
git-gui: Create new branches from a tag.
git-gui: Prefer version file over git-describe.
git-gui: Print version on the console.
git-gui: More consistently display the application name.
git-gui: Permit merging tags into the current branch.
git-gui: Basic version check to ensure git 1.5.0 or later is used.
git-gui: Refactor 'exec git subcmd' idiom.
|
|
Not everyone has gzcat or bzcat installed on their system, but
gunzip -c and bunzip2 -c perform the same task and are available
if the user has installed gzip support or bzip2 support.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also spawn the the new blameview in the background
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There is a bug with this $git_mode variable which should be 0644
or 0755, but nothing else I think.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The new git-fast-import command is not intended to be invoked
directly by an end user. So offering it as a possible completion
for a subcommand is not very useful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This file is incomplete, unmaintained, and it doesn't belong in the GIT
package anyway.
A more complete version is already included in the Linux -mm tree and
is about to make its way into mainline RSN.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds the support for automatically updating the buffer while editing.
A configuration variable git-blame-autoupdate controls whether this should
be enabled or not.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git-blame use the current buffer contents for the blame, instead of
the saved file. This makes the blame correct even if there are unsaved
changes.
Also added a git-reblame command.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Change installation instructions to using either "(require 'git-blame)"
or appropriate autoload instruction in GNU Emacs init file, .emacs
This required adding "(provide 'git-blame)" at the end of git-blame.el
and adding [preliminary] docstring to `git-blame-mode' function for
consistency (to mark function as interactive in `autoload' we have to
provide docstring as DOCSTRING is third arg, and INTERACTIVE fourth,
and both are optional). `git-blame-mode' is marked to autoload.
While at it ensure that we add `git-blame-mode' to `minor-mode-alist'
only once (in a way that does not depend on `cl' package).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add Emacs Lisp file headers, according to "Coding Conventions" chapter
in Emacs Lisp Reference Manual and Elisp Area Convetions for
EmacsWiki:
http://www.emacswiki.org/cgi-bin/wiki/ElispAreaConventions
Those include: copyright notice, GNU GPL boilerplate, description and
instalation instructions as provided in email and in commit message
introducing git-blame.el, compatibility notes from another email by
David Kågedal about what to change to use it in GNU Emacs 20, and
"git-blame ends here" to detect if file was truncated. First line
includes setting file encoding via first line local variable values
(file variables).
Added comment to "(require 'cl)" to note why it is needed; "Coding
Conventions" advises to avoid require the `cl' package of Common Lisp
extensions at run time.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* 'master' of git://repo.or.cz/git/fastimport:
tar archive frontend for fast-import.
Correct spelling of fast-import in docs.
Correct some language in fast-import documentation.
Correct ^0 asciidoc syntax in fast-import docs.
|
|
This is an example fast-import frontend, in less than 100 lines
of Perl. It accepts one or more tar archives on the command line,
passes them through gzcat/bzcat/zcat if necessary, parses out the
individual file headers and feeds all contained data to fast-import.
No temporary files are involved.
Each tar is treated as one commit, with the commit timestamp coming
from the oldest file modification date found within the tar.
Each tar is also tagged with an annotated tag, using the basename
of the tar file as the name of the tag.
Currently symbolic links and hard links are not handled by the
importer. The file checksums are also not verified.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
This has completely been superseded by built-in --color option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Completing the 3 core subcommands to git-remote, along with the
names of remotes for 'show' and 'prune' (which take only existing
remotes) is handy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Apparently `git-rebase -m` uses a metadata directory within .git
(.git/.dotest-merge) rather than .dotest used by git-am (and
git-rebase without the -m option). This caused the completion code
to not offer --continue, --skip or --abort when working within a
`git-rebase -m` session.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Here's another version of git-blame.el that automatically tries to
create a sensible list of colors to use for both light and dark
backgrounds. Plus a few minor fixes.
To use:
1) Load into emacs: M-x load-file RET git-blame.el RET
2) Open a git-controlled file
3) Blame: M-x git-blame-mode
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
hg-to-git.py is able to convert a Mercurial repository into a git one,
and preserves the branches in the process (unlike tailor)
hg-to-git.py can probably be greatly improved (it's a rather crude
combination of shell and python) but it does already work quite well for
me. Features:
- supports incremental conversion
(for keeping a git repo in sync with a hg one)
- supports hg branches
- converts hg tags
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Double clicking on the row execs a new blameview with commit hash
as argument.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We now offer completion support for git-bisect's subcommands,
as well as ref name completion on the good/bad/reset subcommands.
This should make interacting with git-bisect slightly easier on
the fingers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We've recently added --add as an argument to git-config, but I
missed putting it into the earlier round of git-config updates
within the bash completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Don't offer resolve as a possible subcommand completion. If you
read the top of the script, there is a big warning about how it
will go away soon in the near future. People should not be using it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I'm lazy. I don't want to type out --prune if bash can do it for
me with --<tab>.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Apparently nobody really makes use of git-diff-stages, as nobody
has complained that it is not supported by the git-diff frontend.
Since its likely this will go away in the future, we should not
offer it as a possible subcommand completion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
I just realized I did not support ref name completion for git-cherry.
This tool is just too useful to contributors who submit patches
upstream by email; completion support for it is very handy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
format-patch/log/whatchanged all take --not and --all as options
to the internal revlist process. So these should be supported
as possible completions.
gitk takes anything rev-list/log/whatchanged takes, so we should
use complete_revlist to handle its options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Because our use of -o nospace prevents bash from adding a trailing space
when a completion is unique and has been fully completed, we need to
perform this addition on our own. This (large) change converts all
existing uses of compgen to our wrapper __gitcomp which attempts to
handle this by tacking a trailing space onto the end of each offered
option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In many cases we know a completion will be unique, but we've disabled
bash's automatic space addition (-o nospace) so we need to do it
ourselves when necessary.
This change adds additional support for new configuration options
added in 1.5.0, as well as some extended completion support for
the color.* family of options.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Most of these commands are not ones you want to invoke from the
command line on a frequent basis, or have been renamed in 1.5.0 to
more friendly versions, but the old names are being left behind to
support existing scripts in the wild.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Because we use the nospace option for our completion function for
the main 'git' wrapper bash won't automatically add a space after a
unique completion has been made by the user. This has been pointed
out in the past by Linus Torvalds as an undesired behavior. I agree.
We have to use the nospace option to ensure path completion for
a command such as `git show` works properly, but that breaks the
common case of getting the space for a unique completion. So now we
set IFS=$'\n' (linefeed) and add a trailing space to every possible
completion option. This causes bash to insert the space when the
completion is unique.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
