| Age | Commit message (Collapse) | Author |
|---|
|
Trivial fixup for fork() callsites which do not check for errors.
Signed-off-by: Paul T Darga <pdarga@umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add client side sending of "\0host=%s\0" extended
arg for git native protocol, backwards compatibly.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently, fetched refs are output in the order the remote side
happened to send them. This changes the order to match the
order of refs that were given on the command line. To the
existing core callers (git-fetch and git-clone) this does not
make any difference, but for other Porcelain use, it would be
more intuitive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The strncmp for ACK was ACK does not include the final space.
Presumably either we should either remove the trailing space,
or compare 4 chars (as this patch does).
'path' is sometimes strdup'ed, but never freed.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Implement a (slow) unsetenv() for older systems.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
remove environment variables relating to the current repository
before execing the 'remote' half of a local push or pull operation
[jc: the original from Matt spelled out the environment variable
names, which I changed to the preprocessor symbols defined in
cache.h. Also it missed GRAFT_ENVIRONMENT.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the protocol between git-send-pack/git-receive-pack
in a backward compatible way to allow failures at the receiving
end to be propagated back to the sender. Most notably, versions
of git-push before this could not notice if the update hook on
the receiving end refused to update the ref for its own policy
reasons.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow IPv6address/IPvFuture enclosed by [] in URLs, like:
git push '[3ffe:ffff:...:1]:GIT/git'
or
git push 'ssh://[3ffe:ffff:...:1]/GIT/git'
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Failure to dereference a pointer caused incorrect initialization of
the IPv4 address when calling connect() when compiled with -DNO_IPV6.
With this patch and yesterday's patch for git-daemon, it should now be
possible to use the native git protocol for both the client and server
on Cygwin.
Signed-off-by: Paul Serice <paul@serice.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Fix compilation error for gcc-2.95.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This builds on top of the git-proxy mechanism Paul Collins did,
and updates its configuration mechanism.
* GIT_PROXY_COMMAND environment variable is used as the
catch-all fallback, as in the original. This has not
changed.
* Renames proxy configuration variables to core.gitproxy; this
has become a multi-value variable per list discussion, most
notably from suggestion by Linus.
[core]
;# matches www.kernel.org as well
gitproxy = netcatter for kernel.org
gitproxy = netscatter for sample.xz
gitproxy = none for mydomain.xz
gitproxy = netcatter-default
The values are command names, followed by an optional " for "
and domainname; the first tail-match of the domainname
determines which proxy command is used. An entry without "
for " matches any domain and can be used as the default.
The command name "none" is special -- it tells the mechanism
not to use any proxy command and use the native git://
connection.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Here is an updated patch that first looks for GIT_PROXY_COMMAND
in the environment and then git.proxycommand in the repository's
configuration file. I have left the calling convention the same
argv[1] is the host and argv[2] is the port.
I've taken the hostname parsing verbatim from git_tcp_connect(),
so it should now support an explicit port number and whatever
that business with the square brackets is. (Should I move this
to a helper function?)
Regarding internal vs. external hosts, the proxy command can
simply run netcat locally to internal hosts, so perhaps that is
sufficient.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
With this patch, the client side passes identical paths for these two:
ssh://host.xz/~junio/repo
host.xz:~junio/repo
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The client side support for multi_ack.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch implements the client side of backward compatible upload-pack
protocol extension, <20051027141619.0e8029f2.vsu@altlinux.ru> by Sergey.
The updated server can append "server_capabilities" which is supposed
to be a string containing space separated features of the server, after
one of elements in the initial list of SHA1-refname line, hidden with
an embedded NUL.
After get_remote_heads(), check if the server supports the feature like
if (server_supports("multi_ack"))
do_something();
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Let's have it simmer a bit longer in the proposed updates branch
and shake the problems out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch concludes the series, which makes
git-fetch-pack/git-upload-pack negotiate a potentially better set of
common revs. It should make a difference when fetching from a repository
with a few branches.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Forgot to include necessary header file to get the function declaration.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows the remote side (most notably, upload-pack) to show
additional information without affecting the downloader. Peek-remote
does not ignore them -- this is to make it useful for Pasky's
automatic tag following.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It seemed to be such a stupid syntax. It's both what "ssh://" means,
and it's what not specifying a protocol at _all_ means.
But hey, since we already have two ways of saying "use ssh with
pack-files", here's two more.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Omitting the first branch in ?: is a GNU extension. Cute,
but not supported by other compilers. Replaced mostly
by explicit tests. Calls to getenv() simply are repeated
on non-GNU compilers.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
|
|
[jc: I ended up rewriting Martin's patch due to whitespace
breakage, but the credit goes to Martin for doing the initial
patch to identify what needs to be changed.]
Signed-off-by: Martin Sivak <mars@nomi.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
GCC's format __attribute__ is good for checking errors, especially
with -Wformat=2 parameter. This fixes most of the reported problems
against 2005-08-09 snapshot.
|
|
This extends the source side semantics to match what Linus
suggested.
An example:
$ git-send-pack kernel.org:/pub/scm/git/git.git pu^^:master pu
would allow me to push the current pu into pu, and the
commit two commits before it into master, on my public
repository.
The revised rule for updating remote heads is as follows.
$ git-send-pack [--all] <remote> [<ref>...]
- When no <ref> is specified:
- with '--all', it is the same as specifying the full refs/*
path for all local refs;
- without '--all', it is the same as specifying the full
refs/* path for refs that exist on both ends;
- When one or more <ref>s are specified:
- a single token <ref> (i.e. no colon) must be a pattern that
tail-matches refs/* path for an existing local ref. It is
an error for the pattern to match no local ref, or more
than one local refs. The matching ref is pushed to the
remote end under the same name.
- <src>:<dst> can have different cases. <src> is first tried
as the tail-matching pattern for refs/* path.
- If more than one matches are found, it is an error.
- If one match is found, <dst> must either match no remote
ref and start with "refs/", or match exactly one remote
ref. That remote ref is updated with the sha1 value
obtained from the <src> sha1.
- If no match is found, it is given to get_extended_sha1();
it is an error if get_extended_sha1() does not find an
object name. If it succeeds, <dst> must either match
no remote ref and start with "refs/" or match exactly
one remote ref. That remote ref is updated with the sha1
value.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The revised code accidentally inherited the restriction that a
reference can be pushed only once, only because the original did
not allow renaming. This is no longer necessary so lift it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When a new ref is being pushed, the name of it was not
terminated properly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
fix one 'should it be static?' warning and
two 'mixing declarations and code' warnings.
Signed-off-by: Alecs King <alecsk@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows git-send-pack to push local refs to a destination
repository under different names.
Here is the name mapping rules for refs.
* If there is no ref mapping on the command line:
- if '--all' is specified, it is equivalent to specifying
<local> ":" <local> for all the existing local refs on the
command line
- otherwise, it is equivalent to specifying <ref> ":" <ref> for
all the refs that exist on both sides.
* <name> is just a shorthand for <name> ":" <name>
* <src> ":" <dst>
push ref that matches <src> to ref that matches <dst>.
- It is an error if <src> does not match exactly one of local
refs.
- It is an error if <dst> matches more than one remote refs.
- If <dst> does not match any remote refs, either
- it has to start with "refs/"; <dst> is used as the
destination literally in this case.
- <src> == <dst> and the ref that matched the <src> must not
exist in the set of remote refs; the ref matched <src>
locally is used as the name of the destination.
For example,
- "git-send-pack --all <remote>" works exactly as before;
- "git-send-pack <remote> master:upstream" pushes local master
to remote ref that matches "upstream". If there is no such
ref, it is an error.
- "git-send-pack <remote> master:refs/heads/upstream" pushes
local master to remote refs/heads/upstream, even when
refs/heads/upstream does not exist.
- "git-send-pack <remote> master" into an empty remote
repository pushes the local ref/heads/master to the remote
ref/heads/master.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It was broken by the IPv6 patches - we need to remove the ":" part from
the hostname for a successful name lookup.
|
|
Try all addresses for given remote name until it succeeds. Also
supports IPv6.
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It really just boils down to one "get_remote_heads()" function, and a
common "struct ref" structure definition.
|
|
Useful for pulling stuff off a dedicated server. Instead of connecting
with ssh or just starting a local pipeline, we connect over TCP to the
other side and try to see if there's a git server listening.
Of course, since I haven't written the git server yet, that will never
happen. But the server really just needs to listen on a port, and
execute a "git-upload-pack" when somebody connects.
(It should read one packet-line, which should be of the format
"git-upload-pack directoryname\n"
and eventually we migth have other commands the server might accept).
|
|
This tries to be more lenient to the users and stricter to the
attackers by quoting the input properly for shell safety,
instead of forbidding certain characters from the input.
Things to note:
- We do not quote "prog" parameter (which comes from --exec).
The user should know what he is doing. --exec='echo foo'
will supply the first two parameters to the resulting
command, while --exec="'echo foo'" will give the first
parameter, a single string with a space inside.
- We do not care too much about leaking the sq_quote() output
just before running exec().
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I still worry about just quoting things when passing it off to "ssh" or
"sh -c", so I'm being anal. But _, ^ and , are certainly ok and while
both ~ and @ can have speacial meaning to shell/ssh they are benign.
|
|
git-clone-pack will want it too. Soon.
|
|
It's a generic thing for matching refs from the other side.
|
|
I want to use it for git-fetch-pack too.
|
