| Age | Commit message (Collapse) | Author |
|---|
|
* sp/safecrlf:
safecrlf: Add mechanism to warn about irreversible crlf conversions
|
|
* jk/noetcconfig:
fix config reading in tests
allow suppressing of global and system config
Conflicts:
cache.h
|
|
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
|
|
Also use "git_config_string" to simplify "config.c" code
where "excludes_file" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify "config.c" code
where "editor_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use "git_config_string" to simplify "config.c" code
where "pager_program" is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many places we just check if a value from the config file is not
NULL, then we duplicate it and return 0. This patch introduces the new
'git_config_string' function to do that.
This function is also used to refactor some code in 'config.c'.
Refactoring other files is left for other patches.
Also not all the code in "config.c" is refactored, because the function
takes a "const char **" as its first parameter, but in many places a
"char *" is used instead of a "const char *". (And C does not allow
using a "char **" instead of a "const char **" without a warning.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint: (35 commits)
config.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
imap-send.c: guard config parser from value=NULL
wt-status.c: guard config parser from value=NULL
setup.c: guard config parser from value=NULL
remote.c: guard config parser from value=NULL
merge-recursive.c: guard config parser from value=NULL
http.c: guard config parser from value=NULL
help.c: guard config parser from value=NULL
git.c: guard config parser from value=NULL
diff.c: guard config parser from value=NULL
convert.c: guard config parser from value=NULL
connect.c: guard config parser from value=NULL
builtin-tag.c: guard config parser from value=NULL
builtin-show-branch.c: guard config parser from value=NULL
builtin-reflog.c: guard config parser from value=NULL
builtin-log.c: guard config parser from value=NULL
builtin-config.c: guard config parser from value=NULL
builtin-commit.c: guard config parser from value=NULL
builtin-branch.c: guard config parser from value=NULL
...
|
|
user.{name,email}, core.{pager,editor,excludesfile,whitespace} and
i18n.{commit,logoutput}encoding all expect string values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is used to report misconfigured configuration file that does not
give any value to a non-boolean variable, e.g.
[section]
var
It is perfectly fine to say it if the section.var is a boolean (it means
true), but if a variable expects a string value it should be flagged as
a configuration error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_beginning_of_line didn't take into account that the
previous line might have ended with \ in which case it shouldn't
stop but continue its search.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_CONFIG_NOGLOBAL and GIT_CONFIG_NOSYSTEM environment
variables are magic undocumented switches that can be used
to ensure a totally clean environment. This is necessary for
running reliable tests, since those config files may contain
settings that change the outcome of tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
|
|
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path. Noticed by Junio C Hamano.
We concatenate the paths manually. (prefix_filename() won't do
because it expects a prefix with a trailing '/'.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When DEFAULT_GIT_TEMPLATE_DIR is specified as a relative path,
init-db made it relative to exec_path using prefix_path(), which
is wrong. prefix_path() is about a file inside the work tree.
There was a similar misuse in config.c that takes relative
ETC_GITCONFIG path.
A convenience function prefix_filename() can concatenate two paths
to form a path that points at somewhere outside the work tree.
Use it in these codepaths instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove remaining double close(2)'s. i.e. close() before
commit_locked_index() or commit_lock_file().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config parsing routines use the static global
'config_file' to store the FILE* pointing to the current
config file being parsed. The function get_next_char()
automatically converts an EOF on this file to a newline for
the convenience of its callers, and it sets config_file to
NULL to indicate that EOF was reached.
This throws away useful information, though, since some
routines want to call ftell on 'config_file' to find out
exactly _where_ the routine ended. In the case of a key
ending at EOF boundary, we ended up segfaulting in some
cases (changing that key or adding another key in its
section), or failing to provide the necessary newline
(adding a new section).
This patch adds a new flag to indicate EOF and uses that
instead of setting config_file to NULL. It also makes sure
to add newlines where necessary for truncated input. All
three included tests fail without the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a config file has become mildly corrupted due to a missing LF
we may discover some other option joined up against the end of a
numeric value. For example:
[section]
number = 1auto
where the "auto" flag was meant to occur on the next line, below
"number", but the missing LF has caused it to no longer be its
own option. Instead the word "auto" is parsed as a 'unit factor'
for the value of "number".
Before this change we got the confusing error message:
fatal: unknown unit: 'auto'
which told us nothing about where the problem appeared. Now we get:
fatal: bad config value for 'aninvalid.unit'
which at least points the user in the right direction of where to
search for the incorrectly formatted configuration file.
Noticed by erikh on #git, which received the original error from
a simple `git checkout -b` due to a midly corrupted config.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoids horrible 1-byte write(2) calls and cleans up the logic a bit.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
|
|
* maint:
config.c:store_write_pair(): don't read the byte before a malloc'd buffer.
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If ETC_GITCONFIG is not an absolute path, interpret it relative to
--exec-dir. This makes the installed binaries relocatable because the
prefix is not compiled-in.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent patch the path to the system-wide config file will be
computed. This is a preparation for that change. It turns all accesses
of ETC_GITCONFIG into function calls. There is no change in behavior.
As a consequence, config.c is the only file that needs the definition of
ETC_GITCONFIG. Hence, -DETC_GITCONFIG is removed from the CFLAGS and a
special build rule for config.c is introduced. As a side-effect, changing
the defintion of ETC_GITCONFIG (e.g. in config.mak) does not trigger a
complete rebuild anymore.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces a new whitespace error type, "indent-with-non-tab".
The error is about starting a line with 8 or more SP, instead of
indenting it with a HT.
This is not enabled by default, as some projects employ an
indenting policy to use only SPs and no HTs.
The kernel folks and git contributors may want to enable this
detection with:
[core]
whitespace = indent-with-non-tab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces core.whitespace configuration variable that lets
you specify the definition of "whitespace error".
Currently there are two kinds of whitespace errors defined:
* trailing-space: trailing whitespaces at the end of the line.
* space-before-tab: a SP appears immediately before HT in the
indent part of the line.
You can specify the desired types of errors to be detected by
listing their names (unique abbreviations are accepted)
separated by comma. By default, these two errors are always
detected, as that is the traditional behaviour. You can disable
detection of a particular type of error by prefixing a '-' in
front of the name of the error, like this:
[core]
whitespace = -trailing-space
This patch teaches the code to output colored diff with
DIFF_WHITESPACE color to highlight the detected whitespace
errors to honor the new configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
|
|
Changed git_commit_set_multivar() to use the routines provided by
lockfile.c to reduce code duplication and ensure consistent behavior.
Signed-off-by: Bradford C. Smith <bradford.carl.smith@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the commit 'Add GIT_EDITOR environment and core.editor
configuration variables', this was done for the shell scripts.
Port it over to builtin-tag's version of launch_editor(), which
is just about to be refactored into editor.c.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split out the nnn{k,m,g} parsing code from git_config_int into
git_parse_long, so command-line parameters can enjoy the same
functionality. Also add get_parse_ulong for unsigned values.
Make git_config_int use git_parse_long, and add get_config_ulong
as well.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a configuration variable that performs the same function as,
but is overridden by, GIT_PAGER.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Acked-by: Johannes E. Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We always quote "unusual" byte values in a pathname using
C-string style, to make it safer for parsing scripts that do not
handle NUL separated records well (or just too lazy to bother).
The absolute minimum bytes that need to be quoted for this
purpose are TAB, LF (and other control characters), double quote
and backslash.
However, we have also always quoted the bytes in high 8-bit
range; this was partly because we were lazy and partly because
we were being cautious.
This introduces an internal "quote_path_fully" variable, and
core.quotepath configuration variable to control it. When set
to false, it does not quote bytes in high 8-bit range anymore
but passes them intact.
The variable defaults to "true" to retain the traditional
behaviour for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* dh/pack:
Custom compression levels for objects and packs
|
|
* np/pack:
deprecate the new loose object header format
make "repack -f" imply "pack-objects --no-reuse-object"
allow for undeltified objects not to be reused
|
|
Earlier code tried to be half-careful and knew the logic that
seeing "a.var" after seeing "a.b.var" is a sign of the previous
"a.b." section has ended, but forgot it has to handle the other
way. Seeing "a.b.var" after seeing "a.var" is a sign that "a."
section has ended, so a new "a.var2" variable should be added
before the location "a.b.var" appears.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add config variables pack.compression and core.loosecompression ,
and switch --compression=level to pack-objects.
Loose objects will be compressed using core.loosecompression if set,
else core.compression if set, else Z_BEST_SPEED.
Packed objects will be compressed using --compression=level if seen,
else pack.compression if set, else core.compression if set,
else Z_DEFAULT_COMPRESSION. This is the "pack compression level".
Loose objects added to a pack undeltified will be recompressed
to the pack compression level if it is unequal to the current
loose compression level by the preceding rules, or if the loose
object was written while core.legacyheaders = true. Newly
deltified loose objects are always compressed to the current
pack compression level.
Previously packed objects added to a pack are recompressed
to the current pack compression level exactly when their
deltification status changes, since the previous pack data
cannot be reused.
In either case, the --no-reuse-object switch from the first
patch below will always force recompression to the current pack
compression level, instead of assuming the pack compression level
hasn't changed and pack data can be reused when possible.
This applies on top of the following patches from Nicolas Pitre:
[PATCH] allow for undeltified objects not to be reused
[PATCH] make "repack -f" imply "pack-objects --no-reuse-object"
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now that we encourage and actively preserve objects in a packed form
more agressively than we did at the time the new loose object format and
core.legacyheaders were introduced, that extra loose object format
doesn't appear to be worth it anymore.
Because the packing of loose objects has to go through the delta match
loop anyway, and since most of them should end up being deltified in
most cases, there is really little advantage to have this parallel loose
object format as the CPU savings it might provide is rather lost in the
noise in the end.
This patch gets rid of core.legacyheaders, preserve the legacy format as
the only writable loose object format and deprecate the other one to
keep things simpler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new configuration variable core.deltaBaseCacheLimit allows the
user to control how much memory they are willing to give to Git for
caching base objects of deltas. This is not normally meant to be
a user tweakable knob; the "out of the box" settings are meant to
be suitable for almost all workloads.
We default to 16 MiB under the assumption that the cache is not
meant to consume all of the user's available memory, and that the
cache's main purpose was to cache trees, for faster path limiters
during revision traversal. Since trees tend to be relatively small
objects, this relatively small limit should still allow a large
number of objects.
On the other hand we don't want the cache to start storing 200
different versions of a 200 MiB blob, as this could easily blow
the entire address space of a 32 bit process.
We evict OBJ_BLOB from the cache first (credit goes to Junio) as
we want to favor OBJ_TREE within the cache. These are the objects
that have the highest inflate() startup penalty, as they tend to
be small and thus don't have that much of a chance to ammortize
that penalty over the entire data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We generally prefer xstrdup to just plain strdup.
Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/config-rename:
git-config: document --rename-section, provide --remove-section
|
|
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This patch documents the previously undocumented option --rename-section
and adds a new option to zap an entire section.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some file systems that can host git repositories and their working copies
do not support symbolic links. But then if the repository contains a symbolic
link, it is impossible to check out the working copy.
This patch enables partial support of symbolic links so that it is possible
to check out a working copy on such a file system. A new flag
core.symlinks (which is true by default) can be set to false to indicate
that the filesystem does not support symbolic links. In this case, symbolic
links that exist in the trees are checked out as small plain files, and
checking in modifications of these files preserve the symlink property in
the database (as long as an entry exists in the index).
Of course, this does not magically make symbolic links work on such defective
file systems; hence, this solution does not help if the working copy relies
on that an entry is a real symbolic link.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* js/etc-config:
Make tests independent of global config files
config: read system-wide defaults from /etc/gitconfig
|
