| Age | Commit message (Collapse) | Author |
|---|
|
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
|
|
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the head_sha1 member to be head_oid instead. This is required
to convert resolve_ref_unsafe.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We try to read "len" bytes into a buffer and just assume
that it happened correctly. In practice this should usually
be the case, since we just stat'd the file to get the
length. But we could be fooled by transient errors or by
other processes racily truncating the file.
Let's be more careful. There's a slim chance this could
catch a real error, but it also prevents people and tools
from getting worried while reading the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To read the "gitdir" file into memory, we stat the file and
allocate a buffer. But we store the size in an "int", which
may be truncated. We should use a size_t and xsize_t(),
which will detect truncation.
An overflow is unlikely for a "gitdir" file, but it's a good
practice to model.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a common pattern in git commands to allocate some
memory that should last for the lifetime of the program and
then not bother to free it, relying on the OS to throw it
away.
This keeps the code simple, and it's fast (we don't waste
time traversing structures or calling free at the end of the
program). But it also triggers warnings from memory-leak
checkers like valgrind or LSAN. They know that the memory
was still allocated at program exit, but they don't know
_when_ the leaked memory stopped being useful. If it was
early in the program, then it's probably a real and
important leak. But if it was used right up until program
exit, it's not an interesting leak and we'd like to suppress
it so that we can see the real leaks.
This patch introduces an UNLEAK() macro that lets us do so.
To understand its design, let's first look at some of the
alternatives.
Unfortunately the suppression systems offered by
leak-checking tools don't quite do what we want. A
leak-checker basically knows two things:
1. Which blocks were allocated via malloc, and the
callstack during the allocation.
2. Which blocks were left un-freed at the end of the
program (and which are unreachable, but more on that
later).
Their suppressions work by mentioning the function or
callstack of a particular allocation, and marking it as OK
to leak. So imagine you have code like this:
int cmd_foo(...)
{
/* this allocates some memory */
char *p = some_function();
printf("%s", p);
return 0;
}
You can say "ignore allocations from some_function(),
they're not leaks". But that's not right. That function may
be called elsewhere, too, and we would potentially want to
know about those leaks.
So you can say "ignore the callstack when main calls
some_function". That works, but your annotations are
brittle. In this case it's only two functions, but you can
imagine that the actual allocation is much deeper. If any of
the intermediate code changes, you have to update the
suppression.
What we _really_ want to say is that "the value assigned to
p at the end of the function is not a real leak". But
leak-checkers can't understand that; they don't know about
"p" in the first place.
However, we can do something a little bit tricky if we make
some assumptions about how leak-checkers work. They
generally don't just report all un-freed blocks. That would
report even globals which are still accessible when the
leak-check is run. Instead they take some set of memory
(like BSS) as a root and mark it as "reachable". Then they
scan the reachable blocks for anything that looks like a
pointer to a malloc'd block, and consider that block
reachable. And then they scan those blocks, and so on,
transitively marking anything reachable from a global as
"not leaked" (or at least leaked in a different category).
So we can mark the value of "p" as reachable by putting it
into a variable with program lifetime. One way to do that is
to just mark "p" as static. But that actually affects the
run-time behavior if the function is called twice (you
aren't likely to call main() twice, but some of our cmd_*()
functions are called from other commands).
Instead, we can trick the leak-checker by putting the value
into _any_ reachable bytes. This patch keeps a global
linked-list of bytes copied from "unleaked" variables. That
list is reachable even at program exit, which confers
recursive reachability on whatever values we unleak.
In other words, you can do:
int cmd_foo(...)
{
char *p = some_function();
printf("%s", p);
UNLEAK(p);
return 0;
}
to annotate "p" and suppress the leak report.
But wait, couldn't we just say "free(p)"? In this toy
example, yes. But UNLEAK()'s byte-copying strategy has
several advantages over actually freeing the memory:
1. It's recursive across structures. In many cases our "p"
is not just a pointer, but a complex struct whose
fields may have been allocated by a sub-function. And
in some cases (e.g., dir_struct) we don't even have a
function which knows how to free all of the struct
members.
By marking the struct itself as reachable, that confers
reachability on any pointers it contains (including those
found in embedded structs, or reachable by walking
heap blocks recursively.
2. It works on cases where we're not sure if the value is
allocated or not. For example:
char *p = argc > 1 ? argv[1] : some_function();
It's safe to use UNLEAK(p) here, because it's not
freeing any memory. In the case that we're pointing to
argv here, the reachability checker will just ignore
our bytes.
3. Likewise, it works even if the variable has _already_
been freed. We're just copying the pointer bytes. If
the block has been freed, the leak-checker will skip
over those bytes as uninteresting.
4. Because it's not actually freeing memory, you can
UNLEAK() before we are finished accessing the variable.
This is helpful in cases like this:
char *p = some_function();
return another_function(p);
Writing this with free() requires:
int ret;
char *p = some_function();
ret = another_function(p);
free(p);
return ret;
But with unleak we can just write:
char *p = some_function();
UNLEAK(p);
return another_function(p);
This patch adds the UNLEAK() macro and enables it
automatically when Git is compiled with SANITIZE=leak. In
normal builds it's a noop, so we pay no runtime cost.
It also adds some UNLEAK() annotations to show off how the
feature works. On top of other recent leak fixes, these are
enough to get t0000 and t0001 to pass when compiled with
LSAN.
Note the case in commit.c which actually converts a
strbuf_release() into an UNLEAK. This code was already
non-leaky, but the free didn't do anything useful, since
we're exiting. Converting it to an annotation means that
non-leak-checking builds pay no runtime cost. The cost is
minimal enough that it's probably not worth going on a
crusade to convert these kinds of frees to UNLEAKS. I did it
here for consistency with the "sb" leak (though it would
have been equally correct to go the other way, and turn them
both into strbuf_release() calls).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix memory leaks pointed out by Coverity (and people).
* js/plug-leaks: (26 commits)
checkout: fix memory leak
submodule_uses_worktrees(): plug memory leak
show_worktree(): plug memory leak
name-rev: avoid leaking memory in the `deref` case
remote: plug memory leak in match_explicit()
add_reflog_for_walk: avoid memory leak
shallow: avoid memory leak
line-log: avoid memory leak
receive-pack: plug memory leak in update()
fast-export: avoid leaking memory in handle_tag()
mktree: plug memory leaks reported by Coverity
pack-redundant: plug memory leak
setup_discovered_git_dir(): plug memory leak
setup_bare_git_dir(): help static analysis
split_commit_in_progress(): simplify & fix memory leak
checkout: fix memory leak
cat-file: fix memory leak
mailinfo & mailsplit: check for EOF while parsing
status: close file descriptor after reading git-rebase-todo
difftool: address a couple of resource/memory leaks
...
|
|
Some platforms have ulong that is smaller than time_t, and our
historical use of ulong for timestamp would mean they cannot
represent some timestamp that the platform allows. Invent a
separate and dedicated timestamp_t (so that we can distingiuish
timestamps and a vanilla ulongs, which along is already a good
move), and then declare uintmax_t is the type to be used as the
timestamp_t.
* js/larger-timestamps:
archive-tar: fix a sparse 'constant too large' warning
use uintmax_t for timestamps
date.c: abort if the system time cannot handle one of our timestamps
timestamp_t: a new data type for timestamps
PRItime: introduce a new "printf format" for timestamps
parse_timestamp(): specify explicitly where we parse timestamps
t0006 & t5000: skip "far in the future" test when time_t is too limited
t0006 & t5000: prepare for 64-bit timestamps
ref-filter: avoid using `unsigned long` for catch-all data type
|
|
The buffer allocated by shorten_unambiguous_ref() needs to be released.
Discovered by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow to lock a worktree immediately after it's created. This helps
prevent a race between "git worktree add; git worktree lock" and
"git worktree prune".
* nd/worktree-add-lock:
worktree add: add --lock option
|
|
While handy, "git_path()" is a dangerous function to use as a
callsite that uses it safely one day can be broken by changes
to other code that calls it. Reduction of its use continues.
* jk/war-on-git-path:
am: drop "dir" parameter from am_state_init
replace strbuf_addstr(git_path()) with git_path_buf()
replace xstrdup(git_path(...)) with git_pathdup(...)
use git_path_* helper functions
branch: add edit_description() helper
bisect: add git_path_bisect_terms helper
|
|
Writing directly into the strbuf avoids a useless copy of
the data, and dropping calls to git_path() makes it easier
to audit for dangerous calls.
Note that git_path() does an implicit strbuf_reset(), but in
each of these cases we were either already doing that reset,
or writing into a fresh strbuf anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As explained in the document. This option has an advantage over the
command sequence "git worktree add && git worktree lock": there will be
no gap that somebody can accidentally "prune" the new worktree (or soon,
explicitly "worktree remove" it).
"worktree add" does keep a lock on while it's preparing the worktree.
If --lock is specified, this lock remains after the worktree is created.
Suggested-by: David Taylor <David.Taylor@dell.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prefix_filename() function returns a pointer to static
storage, which makes it easy to use dangerously. We already
fixed one buggy caller in hash-object recently, and the
calls in apply.c are suspicious (I didn't dig in enough to
confirm that there is a bug, but we call the function once
in apply_all_patches() and then again indirectly from
parse_chunk()).
Let's make it harder to get wrong by allocating the return
value. For simplicity, we'll do this even when the prefix is
empty (and we could just return the original file pointer).
That will cause us to allocate sometimes when we wouldn't
otherwise need to, but this function isn't called in
performance critical code-paths (and it already _might_
allocate on any given call, so a caller that cares about
performance is questionable anyway).
The downside is that the callers need to remember to free()
the result to avoid leaking. Most of them already used
xstrdup() on the result, so we know they are OK. The
remainder have been converted to use free() as appropriate.
I considered retaining a prefix_filename_unsafe() for cases
where we know the static lifetime is OK (and handling the
cleanup is awkward). This is only a handful of cases,
though, and it's not worth the mental energy in worrying
about whether the "unsafe" variant is OK to use in any
situation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function takes the prefix as a ptr/len pair, but in
every caller the length is exactly strlen(ptr). Let's
simplify the interface and just take the string. This saves
callers specifying it (and in some cases handling a NULL
prefix).
In a handful of cases we had the length already without
calling strlen, so this is technically slower. But it's not
likely to matter (after all, if the prefix is non-empty
we'll allocate and copy it into a buffer anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Incorrect usage help message for "git worktree prune" has been fixed.
* ps/worktree-prune-help-fix:
worktree: fix option descriptions for `prune`
|
|
The `verbose` and `expire` options of the `git worktree prune`
subcommand have wrong descriptions in that they pretend to relate to
objects. But as the git-worktree(1) correctly states, these options have
nothing to do with objects but only with worktrees. Fix the description
accordingly.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It makes it easier to write tests for. But it should also be good for
the user since locating a worktree by eye would be easier once they
notice this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another no-op patch, in preparation for get_worktrees() to do
optional things, like sorting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is required by git-worktree.txt, stating that the main worktree is
the first line (especially in --porcelain mode when we can't just change
behavior at will).
There's only one case when get_worktrees() may skip main worktree, when
parse_ref() fails. Update the code so that we keep first item as main
worktree and return something sensible in this case:
- In user-friendly mode, since we're not constraint by anything,
returning "(error)" should do the job (we already show "(detached
HEAD)" which is not machine-friendly). Actually errors should be
printed on stderr by parse_ref() (*)
- In plumbing mode, we do not show neither 'bare', 'detached' or
'branch ...', which is possible by the format description if I read
it right.
Careful readers may realize that when the local variable "head_ref" in
get_main_worktree() is emptied, add_head_info() will do nothing to
wt->head_sha1. But that's ok because head_sha1 is zero-ized in the
previous patch.
(*) Well, it does not. But it's supposed to be a stop gap implementation
until we can reuse refs code to parse "ref: " stuff in HEAD, from
resolve_refs_unsafe(). Now may be the time since refs refactoring is
mostly done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is no-op. But it helps reduce diff noise in the next patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command accesses default_abbrev (defined in environment.c and is
updated via core.abbrev configuration), but never makes any call to
git_config(). The output from "worktree list" ignores the abbrev
setting for this reason.
Make a call to git_config() to read the default set of configuration
variables at the beginning of the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Initialize struct child_process variables already when they're defined.
That's shorter and saves a function call.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git worktree prune" protected worktrees that are marked as
"locked" by creating a file in a known location. "git worktree"
command learned a dedicated command pair to create and remove such
a file, so that the users do not have to do this with editor.
* nd/worktree-lock:
worktree.c: find_worktree() search by path suffix
worktree: add "unlock" command
worktree: add "lock" command
worktree.c: add is_worktree_locked()
worktree.c: add is_main_worktree()
worktree.c: add find_worktree()
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We know that it should not contain any percent-signs, but
it's a good habit not to feed non-literals to printf
formatters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Further preparatory clean-up for "worktree" feature continues.
* nd/worktree-cleanup-post-head-protection:
worktree: simplify prefixing paths
worktree: avoid 0{40}, too many zeroes, hard to read
worktree.c: use is_dot_or_dotdot()
git-worktree.txt: keep subcommand listing in alphabetical order
worktree.c: rewrite mark_current_worktree() to avoid strbuf
completion: support git-worktree
|
|
Since `git worktree add` uses `git checkout` when `[<branch>]` is used,
and `git checkout -` is already supported, it makes sense to allow the
same shortcut in `git worktree add`.
Signed-off-by: Jordan DE GEA <jordan.de-gea@grenoble-inp.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also makes slash conversion always happen on Windows (a side effect
of prefix_filename). Which is a good thing.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is probably not the best order. But it makes it no-brainer to know
where to insert new commands. At some point we might want to reorder at
least the synopsis part again, grouping commonly use subcommands together.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
The code for warning_errno/die_errno has been refactored and a new
error_errno() reporting helper is introduced.
* nd/error-errno: (41 commits)
wrapper.c: use warning_errno()
vcs-svn: use error_errno()
upload-pack.c: use error_errno()
unpack-trees.c: use error_errno()
transport-helper.c: use error_errno()
sha1_file.c: use {error,die,warning}_errno()
server-info.c: use error_errno()
sequencer.c: use error_errno()
run-command.c: use error_errno()
rerere.c: use error_errno() and warning_errno()
reachable.c: use error_errno()
mailmap.c: use error_errno()
ident.c: use warning_errno()
http.c: use error_errno() and warning_errno()
grep.c: use error_errno()
gpg-interface.c: use error_errno()
fast-import.c: use error_errno()
entry.c: use error_errno()
editor.c: use error_errno()
diff-no-index.c: use error_errno()
...
|
|
While at there, improve the error message to say _what_ failed to
remove.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function find_shared_symref() is used in a couple places:
1) in builtin/branch.c: it's used to detect if a branch is checked out
elsewhere and refuse to delete the branch.
2) in builtin/notes.c: it's used to detect if a note is being merged in
another worktree
3) in branch.c, the function die_if_checked_out() is actually used by
"git checkout" and "git worktree add" to see if a branch is already
checked out elsewhere and refuse the operation.
In cases 1 and 3, if a rebase is ongoing, "HEAD" will be in detached
mode, find_shared_symref() fails to detect it and declares "no branch is
checked out here", which is not really what we want.
This patch tightens the test. If the given symref is "HEAD", we try to
detect if rebase is ongoing. If so return the branch being rebased. This
makes checkout and branch delete operations safer because you can't
checkout a branch being rebased in another place, or delete it.
Special case for checkout. If the current branch is being rebased,
git-rebase.sh may use "git checkout" to abort and return back to the
original branch. The updated test in find_shared_symref() will prevent
that and "git rebase --abort" will fail as a result.
find_shared_symref() and die_if_checked_out() have to learn a new
option ignore_current_worktree to loosen the test a bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
|
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --force is not given but -B is, we should not proceed if the given
branch is already checked out elsewhere. add_worktree() has this test,
but it kicks in too late when "git branch --force" is already
executed. As a result, even though we correctly refuse to create a new
worktree, we have already updated the branch and mess up the other
checkout.
Repeat the die_if_checked_out() test again for this specific case before
"git branch" runs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
