| Age | Commit message (Collapse) | Author |
|---|
|
When adding a remote, we make sure that the remote does not exist
already. However, this test was not quite correct: when the
url.<...>.insteadOf config variable was set to the remote name to be
added, the code would assume that the remote exists already.
Let's allow adding remotes when there is a url.<...>.insteadOf setting
when both the name and the URL agree with the remote to be added.
It might seem like a mistake to compare against remote->url[0] without
verifying that remote->url_nr >=1, but at this point a missing URL has
been filled by the name already, therefore url_nr cannot be zero.
Noticed by Anastas Dancha.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Iterate over refs_to_prune using for_each_string_list_item() rather
than writing out the loop in longhand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename "delete_refs_list" to "refs_to_prune". The new name is more
self-explanatory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the callers have string_lists available already, whereas two
of them had to read data out of a string_list into an array of strings
just to call this function. So change repack_without_refs() to take
the list of refnames to omit as a string_list, and change the callers
accordingly.
Suggested-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inserting items into a list in sorted order is O(N^2) whereas
appending them unsorted and then sorting the list all at once is
O(N lg N).
string_list_insert() also removes duplicates, and this change loses
that functionality. But the strings in this list, which ultimately
come from a for_each_ref() iteration, cannot contain duplicates.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also free them together at the end of the function.
In a moment, the array version will become redundant. Managing them
together makes later steps more obvious.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Aside from making the logic clearer, this avoids a call to
warn_dangling_symrefs(), which always does a for_each_rawref()
iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Until v2.1.0-rc0~22^2~11 (refs.c: add an err argument to
repack_without_refs, 2014-06-20), repack_without_refs forgot to
provide an error message when commit_packed_refs fails. Even today,
it only provides a message for callers that pass a non-NULL err
parameter. Internal callers in refs.c pass non-NULL err but
"git remote" does not.
That means that "git remote rm" and "git remote prune" can fail
without printing a message about why. Fix them by passing in a
non-NULL err parameter and printing the returned message.
This is the last caller to a ref handling function passing err ==
NULL. A later patch can drop support for err == NULL, avoiding such
problems in the future.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref_unsafe takes a boolean argument for reading (a nonexistent ref
resolves successfully for writing but not for reading). Change this to be
a flags field instead, and pass the new constant RESOLVE_REF_READING when
we want this behaviour.
While at it, swap two of the arguments in the function to put output
arguments at the end. As a nice side effect, this ensures that we can
catch callers that were unaware of the new API so they can be audited.
Give the wrapper functions resolve_refdup and read_ref_full the same
treatment for consistency.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Early part of the "ref transaction" topic.
* rs/ref-transaction-0:
refs.c: change ref_transaction_update() to do error checking and return status
refs.c: remove the onerr argument to ref_transaction_commit
update-ref: use err argument to get error from ref_transaction_commit
refs.c: make update_ref_write update a strbuf on failure
refs.c: make ref_update_reject_duplicates take a strbuf argument for errors
refs.c: log_ref_write should try to return meaningful errno
refs.c: make resolve_ref_unsafe set errno to something meaningful on error
refs.c: commit_packed_refs to return a meaningful errno on failure
refs.c: make remove_empty_directories always set errno to something sane
refs.c: verify_lock should set errno to something meaningful
refs.c: make sure log_ref_setup returns a meaningful errno
refs.c: add an err argument to repack_without_refs
lockfile.c: make lock_file return a meaningful errno on failurei
lockfile.c: add a new public function unable_to_lock_message
refs.c: add a strbuf argument to ref_transaction_commit for error logging
refs.c: allow passing NULL to ref_transaction_free
refs.c: constify the sha arguments for ref_transaction_create|delete|update
refs.c: ref_transaction_commit should not free the transaction
refs.c: remove ref_transaction_rollback
|
|
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
|
|
Update repack_without_refs to take an err argument and update it if there
is a failure. Pass the err variable from ref_transaction_commit to this
function so that callers can print a meaningful error message if _commit
fails due to this function.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
|
|
When stripping a suffix like:
if (ends_with(str, "foo"))
buf = xmemdupz(str, strlen(str) - 3);
we can instead use strip_suffix to avoid the constant 3,
which must match the literal "foo" (we sometimes use
strlen("foo") instead, but that means we are repeating
ourselves). The example above becomes:
if (strip_suffix(str, "foo", &len))
buf = xmemdupz(str, len);
This also saves a strlen(), since we calculate the string
length when detecting the suffix.
Note that in some cases we also switch from xstrndup to
xmemdupz, which saves a further strlen call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The skip_prefix() function returns a pointer to the content
past the prefix, or NULL if the prefix was not found. While
this is nice and simple, in practice it makes it hard to use
for two reasons:
1. When you want to conditionally skip or keep the string
as-is, you have to introduce a temporary variable.
For example:
tmp = skip_prefix(buf, "foo");
if (tmp)
buf = tmp;
2. It is verbose to check the outcome in a conditional, as
you need extra parentheses to silence compiler
warnings. For example:
if ((cp = skip_prefix(buf, "foo"))
/* do something with cp */
Both of these make it harder to use for long if-chains, and
we tend to use starts_with() instead. However, the first line
of "do something" is often to then skip forward in buf past
the prefix, either using a magic constant or with an extra
strlen(3) (which is generally computed at compile time, but
means we are repeating ourselves).
This patch refactors skip_prefix() to return a simple boolean,
and to provide the pointer value as an out-parameter. If the
prefix is not found, the out-parameter is untouched. This
lets you write:
if (skip_prefix(arg, "foo ", &arg))
do_foo(arg);
else if (skip_prefix(arg, "bar ", &arg))
do_bar(arg);
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git remote rm" and "git remote prune" can involve removing many
refs at once, which is not a very efficient thing to do when very
many refs exist in the packed-refs file.
* jl/remote-rm-prune:
remote prune: optimize "dangling symref" check/warning
remote: repack packed-refs once when deleting multiple refs
remote rm: delete remote configuration as the last
|
|
xcalloc() takes two arguments: the number of elements and their size.
builtin/remote.c includes several calls to xcalloc() that pass the
arguments in reverse order.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git remote prune' was used to delete many refs in a repository
with many refs, a lot of time was spent checking for (now) dangling
symbolic refs pointing to the deleted ref, since warn_dangling_symref()
was once per deleted ref to check all other refs in the repository.
Avoid this using the new warn_dangling_symrefs() function which
makes one pass over all refs and checks for all the deleted refs in
one go, after they have all been deleted.
Signed-off-by: Jens Lindström <jl@opera.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git remote rm' or 'git remote prune' were used in a repository
with many refs, and needed to delete many remote-tracking refs, a lot
of time was spent deleting those refs since for each deleted ref,
repack_without_refs() was called to rewrite packed-refs without just
that deleted ref.
To avoid this, call repack_without_refs() first to repack without all
the refs that will be deleted, before calling delete_ref() to delete
each one completely. The call to repack_without_ref() in delete_ref()
then becomes a no-op, since packed-refs already won't contain any of
the deleted refs.
Signed-off-by: Jens Lindström <jl@opera.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When removing a remote, delete the remote-tracking branches before
deleting the remote configuration. This way, if the operation fails or
is aborted while deleting the remote-tracking branches, the command can
be rerun to complete the operation.
Signed-off-by: Jens Lindström <jl@opera.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
* fc/trivial:
remote: fix status with branch...rebase=preserve
fetch: add missing documentation
t: trivial whitespace cleanups
abspath: trivial style fix
|
|
Commit 66713ef (pull: allow pull to preserve merges when rebasing)
didn't include an update so 'git remote status' parses branch.<name>.rebase=preserve
correctly, let's do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 8cc5b290 (git merge -X<option>, 25 Nov 2009) introduced
suffixcmp() with nearly the same implementation as postfixcmp()
that already existed since commit 211c8968 (Make git-remote a
builtin, 29 Feb 2008).
The only difference between the two implementations is that,
when the string is smaller than the suffix, one implementation
returns 1 while the other one returns -1.
But, as postfixcmp() is only used to compare for equality, the
distinction does not matter and does not affect the correctness of
this patch.
As postfixcmp() has always been static in builtin/remote.c
and is used nowhere else, it makes more sense to remove it
and use suffixcmp() instead in builtin/remote.c, rather than
to remove suffixcmp().
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --no-prune is passed to one of the following commands:
git fetch --all
git fetch --multiple
git fetch --recurse-submodules
git remote update
then it must also be passed to the "fetch" subprocesses that those
commands use to do their work. Otherwise there might be a fetch.prune
or remote.<name>.prune configuration setting that causes pruning to
occur, contrary to the user's express wish.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use struct argv_array for calling the "git fetch" subprocesses.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reorder function definitions to remove the need for forward
declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* po/remote-set-head-usage:
remote set-head -h: add long options to synopsis
remote doc: document long forms of set-head options
|
|
Document --auto and --delete alongside their short forms -a and -d in
the first line of 'git remote set-head -h' output.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git remote add' subcommand did not check for superfluous command
line arguments. Make it so.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parenthesis are not matching in `builtin_remote_sethead_usage`
as a square bracket is closing something never opened.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/maint-remote-remove:
remote: prefer subcommand name 'remove' to 'rm'
|
|
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mapping that describe what ref fetched from the remote is used to
update what ref locally is called "refspec", not "respec".
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps remove \n from translatable strings
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adds some subcommands that were not listed in "git remote --help"
usage strings.
As an independent follow-up, we may want to rethink how the overall
usage string and subcommand usage strings are maintained.
By Michael Schubert
* ms/remote-usage-string:
remote: update builtin usage
|
|
Add missing options "--tags|--no-tags" and "--push".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* pj/remote-set-branches-usage-fix:
remote: fix set-branches usage and documentation
Conflicts:
builtin/remote.c
|
|
* pj/remote-set-branches-usage-fix:
remote: fix set-branches usage and documentation
Conflicts:
builtin/remote.c
|
|
The canonical order of command line arguments is always to have dashed
commands before other parameters, but the "git remote set-branches"
subcommand was described to take "name" before an optional "--add".
Signed-off-by: Philip Jägenstedt <philip@foolip.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/maint-refname-in-hierarchy-check:
Fix incorrect ref namespace check
|
|
The reason why the trailing slash is needed is obvious. refs/stash and
HEAD are not namespace, but complete refs. Do full string compare on them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/remote-setbranches-usage-fix:
remote: fix set-branches usage
|
