| Age | Commit message (Collapse) | Author |
|---|
|
Code simplification.
* rs/deflate-init-cleanup:
zlib: initialize git_zstream in git_deflate_init{,_gzip,_raw}
|
|
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
|
|
Allow us build with NO_PTHREADS=NoThanks compilation option.
* eb/no-pthreads:
Handle atexit list internaly for unthreaded builds
pack-objects: set number of threads before checking and warning
index-pack: fix compilation with NO_PTHREADS
|
|
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
|
|
If a pack.packSizeLimit is set, we may split the pack data
across multiple packfiles. This means we cannot generate
.bitmap files, as they require that all of the reachable
objects are in the same pack. We check that condition when
we are generating the list of objects to pack (and disable
bitmaps if we are not packing everything), but we forgot to
update it when we notice that we needed to split (which
doesn't happen until the actual write phase).
The resulting bitmaps are quite bogus (they mention entries
that do not exist in the pack!) and can cause a fetch or
push to send insufficient objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are given an expiration time like
--unpack-unreachable=2.weeks.ago, we avoid writing out old,
unreachable loose objects entirely, under the assumption
that running "prune" would simply delete them immediately
anyway. However, this is only valid if we computed the same
set of reachable objects as prune would.
In practice, this is the case, because only git-repack uses
the --unpack-unreachable option with an expiration, and it
always feeds as many objects into the pack as possible. But
we can double-check at runtime just to be sure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we pack all objects, we use only the objects reachable
from references and reflogs. This misses any objects which
are reachable from the index, but not yet referenced.
By itself this isn't a big deal; the objects can remain
loose until they are actually used in a commit. However, it
does create a problem when we drop packed but unreachable
objects. We try to optimize out the writing of objects that
we will immediately prune, which means we must follow the
same rules as prune in determining what is reachable. And
prune uses the index for this purpose.
This is rather uncommon in practice, as objects in the index
would not usually have been packed in the first place. But
it could happen in a sequence like:
1. You make a commit on a branch that references blob X.
2. You repack, moving X into the pack.
3. You delete the branch (and its reflog), so that X is
unreferenced.
4. You "git add" blob X so that it is now referenced only
by the index.
5. You repack again with git-gc. The pack-objects we
invoke will see that X is neither referenced nor
recent and not bother loosening it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This saves us from having to bump the rp_av count when we
add new traversal options.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent commit taught git-prune to keep non-recent objects
that are reachable from recent ones. However, pack-objects,
when loosening unreachable objects, tries to optimize out
the write in the case that the object will be immediately
pruned. It now gets this wrong, since its rule does not
reflect the new prune code (and this can be seen by running
t6501 with a strategically placed repack).
Let's teach pack-objects similar logic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are loosening unreachable packed objects, we do not
bother to process objects that would simply be pruned
immediately anyway. The "would be pruned" check is a simple
comparison, but is about to get more complicated. Let's pull
it out into a separate function.
Note that this is slightly less efficient than the original,
which avoided even opening old packs, since no object in
them could pass the current check, which cares only about
the pack mtime. But the new rules will depend on the exact
object, so we need to perform the check even for old packs.
Note also that we fix a minor buglet when the pack mtime is
exactly the same as the expiration time. The prune code
considers that worth pruning, whereas our check here
considered it worth keeping. This wasn't a big deal. Besides
being unlikely to happen, the result was simply that the
object was loosened and then pruned, missing the
optimization. Still, we can easily fix it while we are here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under NO_PTHREADS build, we warn when delta_search_threads is not
set to 1, because that is the only sensible value on a single
threaded build.
However, the auto detection that kicks in when that variable is set
to 0 (e.g. there is no configuration variable or command line option,
or an explicit --threads=0 is given from the command line to override
the pack.threads configuration to force auto-detection) was not done
before the condition to issue this warning was tested.
Move the auto-detection code and place it at an appropriate spot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reachability bitmaps do not work with shallow operations.
Fixes regression in 2.0.
* jk/pack-shallow-always-without-bitmap:
pack-objects: turn off bitmaps when we see --shallow lines
|
|
Reachability bitmaps do not work with shallow operations,
because they cache a view of the object reachability that
represents the true objects. Whereas a shallow repository
(or a shallow operation in a repository) is inherently
cutting off the object graph with a graft.
We explicitly disallow the use of bitmaps in shallow
repositories by checking is_repository_shallow(), and we
should continue to do that. However, we also want to
disallow bitmaps when we are serving a fetch to a shallow
client, since we momentarily take on their grafted view of
the world.
It used to be enough to call is_repository_shallow at the
start of pack-objects. Upload-pack wrote the other side's
shallow state to a temporary file and pointed the whole
pack-objects process at this state with "git --shallow-file",
and from the perspective of pack-objects, we really were
in a shallow repo. But since b790e0f (upload-pack: send
shallow info over stdin to pack-objects, 2014-03-11), we do
it differently: we send --shallow lines to pack-objects over
stdin, and it registers them itself.
This means that our is_repository_shallow check is way too
early (we have not been told about the shallowness yet), and
that it is insufficient (calling is_repository_shallow is
not enough, as the shallow grafts we register do not change
its return value). Instead, we can just turn off bitmaps
explicitly when we see these lines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/repack-pack-writebitmaps-config:
t7700: drop explicit --no-pack-kept-objects from .keep test
repack: introduce repack.writeBitmaps config option
repack: simplify handling of --write-bitmap-index
pack-objects: stop respecting pack.writebitmaps
|
|
The handling of the pack.writebitmaps config option
originally happened in pack-objects, which is quite
low-level. It would make more sense for drivers of
pack-objects to read the config, and then manipulate
pack-objects with command-line options.
Recently, repack learned to do so, making the low-level read
of pack.writebitmaps redundant here. Other callers, like
upload-pack, would not generally want to write bitmaps
anyway.
This could be considered a regression for somebody who is
driving pack-objects themselves outside of repack and
expects the config option to be used. However, such users
seem rather unlikely given how new the bitmap code is (and
the fact that they would basically be reimplementing repack
in the first place).
Note that we do not do anything with pack.writeBitmapHashCache
here. That option is not about "do we write bimaps", but
rather "when we are writing bitmaps, how do we do it?". You
would want that to kick in anytime you decide to write them,
similar to how pack.indexVersion is used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/pack-bitmap:
pack-objects: do not reuse packfiles without --delta-base-offset
add `ignore_missing_links` mode to revwalk
|
|
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
|
|
When we are sending a packfile to a remote, we currently try
to reuse a whole chunk of packfile without bothering to look
at the individual objects. This can make things like initial
clones much lighter on the server, as we can just dump the
packfile bytes.
However, it's possible that the other side cannot read our
packfile verbatim. For example, we may have objects stored
as OFS_DELTA, but the client is an antique version of git
that only understands REF_DELTA. We negotiate this
capability over the fetch protocol. A normal pack-objects
run will convert OFS_DELTA into REF_DELTA on the fly, but
the "reuse pack" code path never even looks at the objects.
This patch disables packfile reuse if the other side is
missing any capabilities that we might have used in the
on-disk pack. Right now the only one is OFS_DELTA, but we
may need to expand in the future (e.g., if packv4 introduces
new object types).
We could be more thorough and only disable reuse in this
case when we actually have an OFS_DELTA to send, but:
1. We almost always will have one, since we prefer
OFS_DELTA to REF_DELTA when possible. So this case
would almost never come up.
2. Looking through the objects defeats the purpose of the
optimization, which is to do as little work as possible
to get the bytes to the remote.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Justin Lebar <jlebar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The progress output while repacking and transferring objects showed
an apparent large silence while writing the objects out of existing
packfiles, when the reachability bitmap was in use.
* jk/pack-bitmap-progress:
pack-objects: show reused packfile objects in "Counting objects"
pack-objects: show progress for reused packfiles
|
|
Instead of dying when asked to (re)pack with the reachability
bitmap when a bitmap cannot be built, just (re)pack without
producing a bitmap in such a case, with a warning.
* jk/pack-bitmap:
pack-objects: turn off bitmaps when skipping objects
|
|
Serving objects from a shallow repository needs to write a
temporary file to be used, but the serving upload-pack may not have
write access to the repository which is meant to be read-only.
Instead feed these temporary shallow bounds from the standard input
of pack-objects so that we do not have to use a temporary file.
* nd/upload-pack-shallow:
upload-pack: send shallow info over stdin to pack-objects
|
|
* sh/finish-tmp-packfile:
finish_tmp_packfile():use strbuf for pathname construction
|
|
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
|
|
The pack bitmap format requires that we have a single bit
for each object in the pack, and that each object's bitmap
represents its complete set of reachable objects. Therefore
we have no way to represent the bitmap of an object which
references objects outside the pack.
We notice this problem while generating the bitmaps, as we
try to find the offset of a particular object and realize
that we do not have it. In this case we die, and neither the
bitmap nor the pack is generated. This is correct, but
perhaps a little unfriendly. If you have bitmaps turned on
in the config, many repacks will fail which would otherwise
succeed. E.g., incremental repacks, repacks with "-l" when
you have alternates, ".keep" files.
Instead, this patch notices early that we are omitting some
objects from the pack and turns off bitmaps (with a
warning). Note that this is not strictly correct, as it's
possible that the object being omitted is not reachable from
any other object in the pack. In practice, this is almost
never the case, and there are two advantages to doing it
this way:
1. The code is much simpler, as we do not have to cleanly
abort the bitmap-generation process midway through.
2. We do not waste time partially generating bitmaps only
to find out that some object deep in the history is not
being packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are sending a pack for push or fetch, we may reuse a
chunk of packfile without even parsing it. The progress
meter then looks like this:
Reusing existing pack: 3440489, done.
Counting objects: 3, done.
The first line shows that we are reusing a large chunk of
objects, and then we further count any objects not included
in the reused portion with an actual traversal.
These are all implementation details that the user does not
need to care about. Instead, we can show the reused objects
in the normal "counting..." progress meter (which will
simply go much faster than normal), and then continue to add
to it as we traverse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "--all-progress" option is in effect, pack-objects
shows a progress report for the "writing" phase. If the
repository has bitmaps and we are reusing a packfile, the
user sees no progress update until the whole packfile is
sent. Since this is typically the bulk of what is being
written, it can look like git hangs during this phase, even
though the transfer is proceeding.
This generally only happens with "git push" from a
repository with bitmaps. We do not use "--all-progress" for
fetch (since the result is going to index-pack on the
client, which takes care of progress reporting). And for
regular repacks to disk, we do not reuse packfiles.
We already have the progress meter setup during
write_reused_pack; we just need to call display_progress
whiel we are writing out the pack. The progress meter is
attached to our output descriptor, so it automatically
handles the throughput measurements.
However, we need to update the object count as we go, since
that is what feeds the percentage we show. We aren't
actually parsing the packfile as we send it, so we have no
idea how many objects we have sent; we only know that at the
end of N bytes, we will have sent M objects. So we cheat a
little and assume each object is M/N bytes (i.e., the mean
of the objects we are sending). While this isn't strictly
true, it actually produces a more pleasing progress meter
for the user, as it moves smoothly and predictably (and
nobody really cares about the object count; they care about
the percentage, and the object count is a proxy for that).
One alternative would be to actually show two progress
meters: one for the reused pack, and one for the rest of the
objects. That would more closely reflect the data we have
(the first would be measured in bytes, and the second
measured in objects). But it would also be more complex and
annoying to the user; rather than seeing one progress meter
counting up to 100%, they would finish one meter, then start
another one at zero.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A warning from "git pack-objects" were generated by referring to an
incorrect variable when forming the filename that we had trouble
with.
* sh/write-pack-file-warning-message-fix:
write_pack_file: use correct variable in diagnostic
|
|
* mh/replace-refs-variable-rename:
Document some functions defined in object.c
Add docstrings for lookup_replace_object() and do_lookup_replace_object()
rename read_replace_refs to check_replace_refs
|
|
Mark the progress indicators from various time-consuming commands
for i18n/l10n.
* nd/i18n-progress:
i18n: mark all progress lines for translation
|
|
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Dmitry S. Dolzhenko <dmitrys.dolzhenko@yandex.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The old version fixes a maximum length on the buffer, which could be a problem
if one is not certain of the length of get_object_directory().
Using strbuf can avoid the protential bug.
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Sun He <sunheehnus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sh/finish-tmp-packfile
* sh/write-pack-file-warning-message-fix:
write_pack_file: use correct variable in diagnostic
|
|
'pack_tmp_name' is the subject of the utime() check, so report it in the
warning, not the uninitialized 'tmpname'
Signed-off-by: Sun He <sunheehnus@gmail.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The semantics of this flag was changed in commit
e1111cef23 inline lookup_replace_object() calls
but wasn't renamed at the time to minimize code churn. Rename it now,
and add a comment explaining its use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In this patch, we use the bitmap API to perform the `Counting Objects`
phase in pack-objects, rather than a traditional walk through the object
graph. For a reasonably-packed large repo, the time to fetch and clone
is often dominated by the full-object revision walk during the Counting
Objects phase. Using bitmaps can reduce the CPU time required on the
server (and therefore start sending the actual pack data with less
delay).
For bitmaps to be used, the following must be true:
1. We must be packing to stdout (as a normal `pack-objects` from
`upload-pack` would do).
2. There must be a .bitmap index containing at least one of the
"have" objects that the client is asking for.
3. Bitmaps must be enabled (they are enabled by default, but can be
disabled by setting `pack.usebitmaps` to false, or by using
`--no-use-bitmap-index` on the command-line).
If any of these is not true, we fall back to doing a normal walk of the
object graph.
Here are some sample timings from a full pack of `torvalds/linux` (i.e.
something very similar to what would be generated for a clone of the
repository) that show the speedup produced by various
methods:
[existing graph traversal]
$ time git pack-objects --all --stdout --no-use-bitmap-index \
</dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m44.111s
user 0m42.396s
sys 0m3.544s
[bitmaps only, without partial pack reuse; note that
pack reuse is automatic, so timing this required a
patch to disable it]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m5.413s
user 0m5.604s
sys 0m1.804s
[bitmaps with pack reuse (what you get with this patch)]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Reusing existing pack: 3237103, done.
Total 3237103 (delta 0), reused 0 (delta 0)
real 0m1.636s
user 0m1.460s
sys 0m0.172s
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function actually does three things:
1. Check whether we've already added the object to our
packing list.
2. Check whether the object meets our criteria for adding.
3. Actually add the object to our packing list.
It's a little hard to see these three phases, because they
happen linearly in the rather long function. Instead, this
patch breaks them up into three separate helper functions.
The result is a little easier to follow, though it
unfortunately suffers from some optimization
interdependencies between the stages (e.g., during step 3 we
use the packing list index from step 1 and the packfile
information from step 2).
More importantly, though, the various parts can be
composed differently, as they will be in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1write function returns an int, but it will always be
"0". The failure-prone parts of the function happen in the
"flush" callback, which cannot pass an error back to us. So
we just end up calling die() during the flush.
Let's just drop the return value altogether, as it only
confuses callers into thinking that it might be useful.
Only one call site actually checked the return value. We can
drop that check, since it just led to a die() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the pack-objects system grows beyond the single
pack-objects.c file, more parts (like the soon-to-exist
bitmap code) will need to compute hashes for matching
deltas. Factor out name_hash to make it available to other
files.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hash table that stores the packing list for a given `pack-objects`
run was tightly coupled to the pack-objects code.
In this commit, we refactor the hash table and the underlying storage
array into a `packing_data` struct. The functionality for accessing and
adding entries to the packing list is hence accessible from other parts
of Git besides the `pack-objects` builtin.
This refactoring is a requirement for further patches in this series
that will require accessing the commit packing list from outside of
`pack-objects`.
The hash table implementation has been minimally altered: we now
use table sizes which are always a power of two, to ensure a uniform
index distribution in the array.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
