summaryrefslogtreecommitdiff
path: root/builtin/merge.c
AgeCommit message (Collapse)Author
2020-01-15gpg-interface: add minTrustLevel as a configuration optionHans Jerry Illikainen
Previously, signature verification for merge and pull operations checked if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in verify_merge_signature(). If that was the case, the process die()d. The other code paths that did signature verification relied entirely on the return code from check_commit_signature(). And signatures made with a good key, irregardless of its trust level, was considered valid by check_commit_signature(). This difference in behavior might induce users to erroneously assume that the trust level of a key in their keyring is always considered by Git, even for operations where it is not (e.g. during a verify-commit or verify-tag). The way it worked was by gpg-interface.c storing the result from the key/signature status *and* the lowest-two trust levels in the `result` member of the signature_check structure (the last of these status lines that were encountered got written to `result`). These are documented in GPG under the subsection `General status codes` and `Key related`, respectively [1]. The GPG documentation says the following on the TRUST_ status codes [1]: """ These are several similar status codes: - TRUST_UNDEFINED <error_token> - TRUST_NEVER <error_token> - TRUST_MARGINAL [0 [<validation_model>]] - TRUST_FULLY [0 [<validation_model>]] - TRUST_ULTIMATE [0 [<validation_model>]] For good signatures one of these status lines are emitted to indicate the validity of the key used to create the signature. The error token values are currently only emitted by gpgsm. """ My interpretation is that the trust level is conceptionally different from the validity of the key and/or signature. That seems to also have been the assumption of the old code in check_signature() where a result of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED) were both considered a success. The two cases where a result of 'U' had special meaning were in verify_merge_signature() (where this caused git to die()) and in format_commit_one() (where it affected the output of the %G? format specifier). I think it makes sense to refactor the processing of TRUST_ status lines such that users can configure a minimum trust level that is enforced globally, rather than have individual parts of git (e.g. merge) do it themselves (except for a grace period with backward compatibility). I also think it makes sense to not store the trust level in the same struct member as the key/signature status. While the presence of a TRUST_ status code does imply that the signature is good (see the first paragraph in the included snippet above), as far as I can tell, the order of the status lines from GPG isn't well-defined; thus it would seem plausible that the trust level could be overwritten with the key/signature status if they were stored in the same member of the signature_check structure. This patch introduces a new configuration option: gpg.minTrustLevel. It consolidates trust-level verification to gpg-interface.c and adds a new `trust_level` member to the signature_check structure. Backward-compatibility is maintained by introducing a special case in verify_merge_signature() such that if no user-configurable gpg.minTrustLevel is set, then the old behavior of rejecting TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand, gpg.minTrustLevel is set, then that value overrides the old behavior. Similarly, the %G? format specifier will continue show 'U' for signatures made with a key that has a trust level of TRUST_UNDEFINED or TRUST_NEVER, even though the 'U' character no longer exist in the `result` member of the signature_check structure. A new format specifier, %GT, is also introduced for users that want to show all possible trust levels for a signature. Another approach would have been to simply drop the trust-level requirement in verify_merge_signature(). This would also have made the behavior consistent with other parts of git that perform signature verification. However, requiring a minimum trust level for signing keys does seem to have a real-world use-case. For example, the build system used by the Qubes OS project currently parses the raw output from verify-tag in order to assert a minimum trust level for keys used to sign git tags [2]. [1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master [2] https://github.com/QubesOS/qubes-builder/blob/9674c1991deef45b1a1b1c71fddfab14ba50dccf/scripts/verify-git-tag#L43 Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-07Merge branch 'tg/stash-refresh-index'Junio C Hamano
"git stash" learned to write refreshed index back to disk. * tg/stash-refresh-index: stash: make sure to write refreshed cache merge: use refresh_and_write_cache factor out refresh_and_write_cache function
2019-09-20merge: use refresh_and_write_cacheThomas Gummerer
Use the 'refresh_and_write_cache()' convenience function introduced in the last commit, instead of refreshing and writing the index manually in merge.c Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-07merge: --no-verify to bypass pre-merge-commit hookMichael J Gruber
Analogous to commit, introduce a '--no-verify' option which bypasses the pre-merge-commit hook. The shorthand '-n' is taken by '--no-stat' already. [js: * reworded commit message to reflect current state of --no-stat flag and new hook name * fixed flag documentation to reflect new hook name * cleaned up trailing whitespace * squashed test changes from the original series' patch 4/4 * modified tests to follow pattern from this series' patch 1/4 * added a test case for --no-verify with non-executable hook * when testing that the merge hook did not run, make sure we actually have a merge to perform (by resetting the "side" branch to its original state). ] Improved-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-07git-merge: honor pre-merge-commit hookMichael J Gruber
git-merge does not honor the pre-commit hook when doing automatic merge commits, and for compatibility reasons this is going to stay. Introduce a pre-merge-commit hook which is called for an automatic merge commit just like pre-commit is called for a non-automatic merge commit (or any other commit). [js: * renamed hook from "pre-merge" to "pre-merge-commit" * only discard the index if the hook is actually present * expanded githooks documentation entry * clarified that hook should write messages to stderr * squashed test changes from the original series' patch 4/4 * modified tests to follow new pattern from this series' patch 1/4 * added a test case for non-executable merge hooks * added a test case for failed merges * when testing that the merge hook did not run, make sure we actually have a merge to perform (by resetting the "side" branch to its original state). * reworded commit message ] Improved-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-07merge: do no-verify like commitMichael J Gruber
f8b863598c ("builtin/merge: honor commit-msg hook for merges", 2017-09-07) introduced the no-verify flag to merge for bypassing the commit-msg hook, though in a different way from the implementation in commit.c. Change the implementation in merge.c to be the same as in commit.c so that both do the same in the same way. This also changes the output of "git merge --help" to be more clear that the hook return code is respected by default. [js: * reworded commit message * squashed documentation changes from original series' patch 3/4 ] Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-19Merge branch 'ea/merge-code-cleanup'Junio C Hamano
A loop has been rewritten for conciseness and clarity. * ea/merge-code-cleanup: builtin/merge.c - cleanup of code in for-cycle that tests strategies
2019-07-09Merge branch 'ds/close-object-store'Junio C Hamano
The commit-graph file is now part of the "files that the runtime may keep open file descriptors on, all of which would need to be closed when done with the object store", and the file descriptor to an existing commit-graph file now is closed before "gc" finalizes a new instance to replace it. * ds/close-object-store: packfile: rename close_all_packs to close_object_store packfile: close commit-graph in close_all_packs commit-graph: use raw_object_store when closing
2019-07-09builtin/merge.c - cleanup of code in for-cycle that tests strategiesEdmundo Carmona Antoranz
The cmd_merge() function has a loop that tries different merge strategies in turn, and stops when a strategy gets a clean merge, while keeping the "best" conflicted merge so far. Make the loop easier to follow by moving the code around, ensuring that there is only one "break" in the loop where an automerge succeeds. Also group the actions that are performed after an automerge succeeds together to a single location, outside and after the loop. Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-17Merge branch 'vv/merge-squash-with-explicit-commit'Junio C Hamano
"git merge --squash" is designed to update the working tree and the index without creating the commit, and this cannot be countermanded by adding the "--commit" option; the command now refuses to work when both options are given. * vv/merge-squash-with-explicit-commit: merge: refuse --commit with --squash
2019-06-13Merge branch 'nd/merge-quit'Junio C Hamano
"git merge" learned "--quit" option that cleans up the in-progress merge while leaving the working tree and the index still in a mess. * nd/merge-quit: merge: add --quit merge: remove drop_save() in favor of remove_merge_branch_state()
2019-06-12packfile: rename close_all_packs to close_object_storeDerrick Stolee
The close_all_packs() method is now responsible for more than just pack-files. It also closes the commit-graph and the multi-pack-index. Rename the function to be more descriptive of its larger role. The name also fits because the input parameter is a raw_object_store. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-28merge: refuse --commit with --squashVishal Verma
Convert option_commit to tristate, representing the states of 'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in place, check whether option_commit was enabled by cli when squashing a merge. If so, error out, as this is not supported. Previously, when --squash was supplied, 'option_commit' was silently dropped. This could have been surprising to a user who tried to override the no-commit behavior of squash using --commit explicitly. Add a note to the --squash option for git-merge to clarify the incompatibility, and add a test case to t7600-merge.sh Cc: Junio C Hamano <gitster@pobox.com> Cc: Rafael Ascensão <rafa.almas@gmail.com> Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Vishal Verma <vishal@stellar.sh> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-19merge: add --quitNguyễn Thái Ngọc Duy
This allows to cancel the current merge without resetting worktree/index, which is what --abort is for. Like other --quit(s), this is often used when you forgot that you're in the middle of a merge and already switched away, doing different things. By the time you've realized, you can't even continue the merge anymore. This also makes all in-progress commands, am, merge, rebase, revert and cherry-pick, take all three --abort, --continue and --quit (bisect has a different UI). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-13merge: remove drop_save() in favor of remove_merge_branch_state()Nguyễn Thái Ngọc Duy
Both remove_branch_state() and drop_save() delete almost the same set of files about the current merge state. The only difference is MERGE_RR but it should also be cleaned up after a successful merge, which is what drop_save() is for. Make a new function that deletes all merge-related state files and use it instead of drop_save(). This function will also be used in the next patch that introduces --quit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-19cherry-pick/revert: add scissors line on merge conflictDenton Liu
Fix a bug where the scissors line is placed after the Conflicts: section, in the case where a merge conflict occurs and commit.cleanup = scissors. Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18merge: add scissors line on merge conflictDenton Liu
This fixes a bug where the scissors line is placed after the Conflicts: section, in the case where a merge conflict occurs and commit.cleanup = scissors. Next, if commit.cleanup = scissors is specified, don't produce a scissors line in commit if one already exists in the MERGE_MSG file. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-18merge: cleanup messages like commitDenton Liu
This change allows git-merge messages to be cleaned up with the commit.cleanup configuration or --cleanup option, just like how git-commit does it. We also give git-pull the option of --cleanup so that it can also take advantage of this change. Finally, add testing to ensure that messages are properly cleaned up. Note that some newlines that were added to the commit message were removed so that if a file were read via -F, it would be copied faithfully. Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-07Merge branch 'nd/diff-parseopt'Junio C Hamano
The diff machinery, one of the oldest parts of the system, which long predates the parse-options API, uses fairly long and complex handcrafted option parser. This is being rewritten to use the parse-options API. * nd/diff-parseopt: diff.c: convert --raw diff.c: convert -W|--[no-]function-context diff.c: convert -U|--unified diff.c: convert -u|-p|--patch diff.c: prepare to use parse_options() for parsing diff.h: avoid bit fields in struct diff_flags diff.h: keep forward struct declarations sorted parse-options: allow ll_callback with OPTION_CALLBACK parse-options: avoid magic return codes parse-options: stop abusing 'callback' for lowlevel callbacks parse-options: add OPT_BITOP() parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN parse-options: add one-shot mode parse-options.h: remove extern on function prototypes
2019-01-28parse-options: allow ll_callback with OPTION_CALLBACKNguyễn Thái Ngọc Duy
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does not allow access to parse_opt_ctx_t, which sometimes is useful (e.g. to obtain the prefix). Extending parse_opt_cb to take parse_opt_cb could result in a lot of changes. Instead let's just allow ll_callback to be used with OPTION_CALLBACK. The user will have to be careful, not to change anything in ctx, or return wrong result code. But that's the price for ll_callback. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-28parse-options: avoid magic return codesNguyễn Thái Ngọc Duy
Give names to these magic negative numbers. Make parse_opt_ll_cb return an enum to make clear it can actually control parse_options() with different return values (parse_opt_cb can too, but nobody needs it). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-28parse-options: stop abusing 'callback' for lowlevel callbacksNguyễn Thái Ngọc Duy
Lowlevel callbacks have different function signatures. Add a new field in 'struct option' with the right type for lowlevel callbacks. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-24cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switchNguyễn Thái Ngọc Duy
By default, index compat macros are off from now on, because they could hide the_index dependency. Only those in builtin can use it. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14merge-recursive.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-04Merge branch 'nd/the-index'Junio C Hamano
More codepaths become aware of working with in-core repository instance other than the default "the_repository". * nd/the-index: (22 commits) rebase-interactive.c: remove the_repository references rerere.c: remove the_repository references pack-*.c: remove the_repository references pack-check.c: remove the_repository references notes-cache.c: remove the_repository references line-log.c: remove the_repository reference diff-lib.c: remove the_repository references delta-islands.c: remove the_repository references cache-tree.c: remove the_repository references bundle.c: remove the_repository references branch.c: remove the_repository reference bisect.c: remove the_repository reference blame.c: remove implicit dependency the_repository sequencer.c: remove implicit dependency on the_repository sequencer.c: remove implicit dependency on the_index transport.c: remove implicit dependency on the_index notes-merge.c: remove implicit dependency the_repository notes-merge.c: remove implicit dependency on the_index list-objects.c: reduce the_repository references list-objects-filter.c: remove implicit dependency on the_index ...
2019-01-04Merge branch 'nd/i18n'Junio C Hamano
More _("i18n") markings. * nd/i18n: fsck: mark strings for translation fsck: reduce word legos to help i18n parse-options.c: mark more strings for translation parse-options.c: turn some die() to BUG() parse-options: replace opterror() with optname() repack: mark more strings for translation remote.c: mark messages for translation remote.c: turn some error() or die() to BUG() reflog: mark strings for translation read-cache.c: add missing colon separators read-cache.c: mark more strings for translation read-cache.c: turn die("internal error") to BUG() attr.c: mark more string for translation archive.c: mark more strings for translation alias.c: mark split_cmdline_strerror() strings for translation git.c: mark more strings for translation
2018-11-18Merge branch 'jk/verify-sig-merge-into-void'Junio C Hamano
"git merge" and "git pull" that merges into an unborn branch used to completely ignore "--verify-signatures", which has been corrected. * jk/verify-sig-merge-into-void: pull: handle --verify-signatures for unborn branch merge: handle --verify-signatures for unborn branch merge: extract verify_merge_signature() helper
2018-11-12sequencer.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
Since we're going to pass 'struct repository *' around most of the time instead of 'struct index_state *' because most sequencer.c operations need more than just the index, the_repository is replaced as well in the functions that now take 'struct repository *'. the_repository is still present in this file, but total clean up will be done later. It's not the main focus of this patch. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12parse-options: replace opterror() with optname()Nguyễn Thái Ngọc Duy
Introduce optname() that does the early half of original opterror() to come up with the name of the option reported back to the user, and use it to kill opterror(). The callers of opterror() now directly call error() using the string returned by opterror() instead. There are a few issues with opterror() - it tries to assemble an English sentence from pieces. This is not great for translators because we give them pieces instead of a full sentence. - It's a wrapper around error() and needs some hack to let the compiler know it always returns -1. - Since it takes a string instead of printf format, one call site has to assemble the string manually before passing to it. Using error() directly solves the second and third problems. It kind helps the first problem as well because "%s does foo" does give a translator a full sentence in a sense and let them reorder if needed. But it has limitations, if the subject part has to change based on the rest of the sentence, that language is screwed. This is also why I try to avoid calling optname() when 'flags' is known in advance. Mark of these strings for translation as well while at there. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12alias.c: mark split_cmdline_strerror() strings for translationNguyễn Thái Ngọc Duy
This function can be part of translated messages. To make sure we don't have a sentence with mixed languages, mark the strings for translation, but only use translated strings in places we know we will output translated strings. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-07merge: handle --verify-signatures for unborn branchJeff King
When git-merge sees that we are on an unborn branch (i.e., there is no HEAD), it follows a totally separate code path than the usual merge logic. This code path does not know about verify_signatures, and so we fail to notice bad or missing signatures. This has been broken since --verify-signatures was added in efed002249 (merge/pull: verify GPG signatures of commits being merged, 2013-03-31). In an ideal world, we'd unify the flow for this case with the regular merge logic, which would fix this bug and avoid introducing similar ones. But because the unborn case is so different, it would be a burden on the rest of the function to continually handle the missing HEAD. So let's just port the verification check to this special case. Reported-by: Felix Eckhofer <felix@eckhofer.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-07merge: extract verify_merge_signature() helperJeff King
The logic to implement "merge --verify-signatures" is inline in cmd_merge(), but this site misses some cases. Let's extract the logic into a function so we can call it from more places. We'll move it to commit.[ch], since one of the callers (git-pull) is outside our source file. This function isn't all that general (after all, its main function is to exit the program) but it's not worth trying to fix that. The heavy lifting is done by check_commit_signature(), and our purpose here is just sharing the die() logic. We'll mark it with a comment to make that clear. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06assert NOARG/NONEG behavior of parse-options callbacksJeff King
When we define a parse-options callback, the flags we put in the option struct must match what the callback expects. For example, a callback which does not handle the "unset" parameter should only be used with PARSE_OPT_NONEG. But since the callback and the option struct are not defined next to each other, it's easy to get this wrong (as earlier patches in this series show). Fortunately, the compiler can help us here: compiling with -Wunused-parameters can show us which callbacks ignore their "unset" parameters (and likewise, ones that ignore "arg" expect to be triggered with PARSE_OPT_NOARG). But after we've inspected a callback and determined that all of its callers use the right flags, what do we do next? We'd like to silence the compiler warning, but do so in a way that will catch any wrong calls in the future. We can do that by actually checking those variables and asserting that they match our expectations. Because this is such a common pattern, we'll introduce some helper macros. The resulting messages aren't as descriptive as we could make them, but the file/line information from BUG() is enough to identify the problem (and anyway, the point is that these should never be seen). Each of the annotated callbacks in this patch triggers -Wunused-parameters, and was manually inspected to make sure all callers use the correct options (so none of these BUGs should be triggerable). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-19Merge branch 'nd/the-index'Junio C Hamano
Various codepaths in the core-ish part learn to work on an arbitrary in-core index structure, not necessarily the default instance "the_index". * nd/the-index: (23 commits) revision.c: reduce implicit dependency the_repository revision.c: remove implicit dependency on the_index ws.c: remove implicit dependency on the_index tree-diff.c: remove implicit dependency on the_index submodule.c: remove implicit dependency on the_index line-range.c: remove implicit dependency on the_index userdiff.c: remove implicit dependency on the_index rerere.c: remove implicit dependency on the_index sha1-file.c: remove implicit dependency on the_index patch-ids.c: remove implicit dependency on the_index merge.c: remove implicit dependency on the_index merge-blobs.c: remove implicit dependency on the_index ll-merge.c: remove implicit dependency on the_index diff-lib.c: remove implicit dependency on the_index read-cache.c: remove implicit dependency on the_index diff.c: remove implicit dependency on the_index grep.c: remove implicit dependency on the_index diff.c: remove the_index dependency in textconv() functions blame.c: rename "repo" argument to "r" combine-diff.c: remove implicit dependency on the_index ...
2018-09-21revision.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21rerere.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
The reason rerere(), rerere_forget() and rerere_remaining() take a struct repository instead of struct index_state is not obvious from the patch: Deep in update_paths() and find_conflict(), hold_locked_index() and read_index() are called. These functions assumes the index path at $GIT_DIR/index which is not always true when you take an arbitrary index state. Taking a repository will allow us to point to the right index path later when we replace them with repo_ versions. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21merge.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21diff.c: remove implicit dependency on the_indexNguyễn Thái Ngọc Duy
A new variant repo_diff_setup() is added that takes 'struct repository *' and diff_setup() becomes a thin macro around it that is protected by NO_THE_REPOSITORY_COMPATIBILITY_MACROS, similar to NO_THE_INDEX_.... The plan is these macros will always be defined for all library files and the macros are only accessible in builtin/ Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17Merge branch 'jk/cocci'Junio C Hamano
spatch transformation to replace boolean uses of !hashcmp() to newly introduced oideq() is added, and applied, to regain performance lost due to support of multiple hash algorithms. * jk/cocci: show_dirstat: simplify same-content check read-cache: use oideq() in ce_compare functions convert hashmap comparison functions to oideq() convert "hashcmp() != 0" to "!hasheq()" convert "oidcmp() != 0" to "!oideq()" convert "hashcmp() == 0" to hasheq() convert "oidcmp() == 0" to oideq() introduce hasheq() and oideq() coccinelle: use <...> for function exclusion
2018-09-17Merge branch 'ds/reachable'Junio C Hamano
The code for computing history reachability has been shuffled, obtained a bunch of new tests to cover them, and then being improved. * ds/reachable: commit-reach: correct accidental #include of C file commit-reach: use can_all_from_reach commit-reach: make can_all_from_reach... linear commit-reach: replace ref_newer logic test-reach: test commit_contains test-reach: test can_all_from_reach_with_flags test-reach: test reduce_heads test-reach: test get_merge_bases_many test-reach: test is_descendant_of test-reach: test in_merge_bases test-reach: create new test tool for ref_newer commit-reach: move can_all_from_reach_with_flags upload-pack: generalize commit date cutoff upload-pack: refactor ok_to_give_up() upload-pack: make reachable() more generic commit-reach: move commit_contains from ref-filter commit-reach: move ref_newer from remote.c commit.h: remove method declarations commit-reach: move walk methods from commit.c
2018-08-29convert "oidcmp() != 0" to "!oideq()"Jeff King
This is the flip side of the previous two patches: checking for a non-zero oidcmp() can be more strictly expressed as inequality. Like those patches, we write "!= 0" in the coccinelle transformation, which covers by isomorphism the more common: if (oidcmp(E1, E2)) As with the previous two patches, this patch can be achieved almost entirely by running "make coccicheck"; the only differences are manual line-wrap fixes to match the original code. There is one thing to note for anybody replicating this, though: coccinelle 1.0.4 seems to miss the case in builtin/tag.c, even though it's basically the same as all the others. Running with 1.0.7 does catch this, so presumably it's just a coccinelle bug that was fixed in the interim. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29convert "oidcmp() == 0" to oideq()Jeff King
Using the more restrictive oideq() should, in the long run, give the compiler more opportunities to optimize these callsites. For now, this conversion should be a complete noop with respect to the generated code. The result is also perhaps a little more readable, as it avoids the "zero is equal" idiom. Since it's so prevalent in C, I think seasoned programmers tend not to even notice it anymore, but it can sometimes make for awkward double negations (e.g., we can drop a few !!oidcmp() instances here). This patch was generated almost entirely by the included coccinelle patch. This mechanical conversion should be completely safe, because we check explicitly for cases where oidcmp() is compared to 0, which is what oideq() is doing under the hood. Note that we don't have to catch "!oidcmp()" separately; coccinelle's standard isomorphisms make sure the two are treated equivalently. I say "almost" because I did hand-edit the coccinelle output to fix up a few style violations (it mostly keeps the original formatting, but sometimes unwraps long lines). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-15Merge branch 'nd/i18n'Junio C Hamano
Many more strings are prepared for l10n. * nd/i18n: (23 commits) transport-helper.c: mark more strings for translation transport.c: mark more strings for translation sha1-file.c: mark more strings for translation sequencer.c: mark more strings for translation replace-object.c: mark more strings for translation refspec.c: mark more strings for translation refs.c: mark more strings for translation pkt-line.c: mark more strings for translation object.c: mark more strings for translation exec-cmd.c: mark more strings for translation environment.c: mark more strings for translation dir.c: mark more strings for translation convert.c: mark more strings for translation connect.c: mark more strings for translation config.c: mark more strings for translation commit-graph.c: mark more strings for translation builtin/replace.c: mark more strings for translation builtin/pack-objects.c: mark more strings for translation builtin/grep.c: mark strings for translation builtin/config.c: mark more strings for translation ...
2018-08-02Merge branch 'js/rebase-merge-octopus'Junio C Hamano
"git rebase --rebase-merges" mode now handles octopus merges as well. * js/rebase-merge-octopus: rebase --rebase-merges: adjust man page for octopus support rebase --rebase-merges: add support for octopus merges merge: allow reading the merge commit message from a file
2018-08-02Merge branch 'bc/object-id'Junio C Hamano
Conversion from uchar[40] to struct object_id continues. * bc/object-id: pretty: switch hard-coded constants to the_hash_algo sha1-file: convert constants to uses of the_hash_algo log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz diff: switch GIT_SHA1_HEXSZ to use the_hash_algo builtin/merge-recursive: make hash independent builtin/merge: switch to use the_hash_algo builtin/fmt-merge-msg: make hash independent builtin/update-index: simplify parsing of cacheinfo builtin/update-index: convert to using the_hash_algo refs/files-backend: use the_hash_algo for writing refs sha1-name: use the_hash_algo when parsing object names strbuf: allocate space with GIT_MAX_HEXSZ commit: express tree entry constants in terms of the_hash_algo hex: switch to using the_hash_algo tree-walk: replace hard-coded constants with the_hash_algo cache: update object ID functions for the_hash_algo
2018-07-23Update messages in preparation for i18nNguyễn Thái Ngọc Duy
Many messages will be marked for translation in the following commits. This commit updates some of them to be more consistent and reduce diff noise in those commits. Changes are - keep the first letter of die(), error() and warning() in lowercase - no full stop in die(), error() or warning() if it's single sentence messages - indentation - some messages are turned to BUG(), or prefixed with "BUG:" and will not be marked for i18n - some messages are improved to give more information - some messages are broken down by sentence to be i18n friendly (on the same token, combine multiple warning() into one big string) - the trailing \n is converted to printf_ln if possible, or deleted if not redundant - errno_errno() is used instead of explicit strerror() Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-20commit.h: remove method declarationsDerrick Stolee
These methods are now declared in commit-reach.h. Remove them from commit.h and add new include statements in all files that require these declarations. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18Merge branch 'sb/object-store-grafts'Junio C Hamano
The conversion to pass "the_repository" and then "a_repository" throughout the object access API continues. * sb/object-store-grafts: commit: allow lookup_commit_graft to handle arbitrary repositories commit: allow prepare_commit_graft to handle arbitrary repositories shallow: migrate shallow information into the object parser path.c: migrate global git_path_* to take a repository argument cache: convert get_graft_file to handle arbitrary repositories commit: convert read_graft_file to handle arbitrary repositories commit: convert register_commit_graft to handle arbitrary repositories commit: convert commit_graft_pos() to handle arbitrary repositories shallow: add repository argument to is_repository_shallow shallow: add repository argument to check_shallow_file_for_update shallow: add repository argument to register_shallow shallow: add repository argument to set_alternate_shallow_file commit: add repository argument to lookup_commit_graft commit: add repository argument to prepare_commit_graft commit: add repository argument to read_graft_file commit: add repository argument to register_commit_graft commit: add repository argument to commit_graft_pos object: move grafts to object parser object-store: move object access functions to object-store.h
2018-07-16builtin/merge: switch to use the_hash_algobrian m. carlson
Switch uses of GIT_SHA1_HEXSZ to use the_hash_algo instead. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-11merge: allow reading the merge commit message from a fileJohannes Schindelin
This is consistent with `git commit` which, like `git merge`, supports passing the commit message via `-m <msg>` and, unlike `git merge` before this patch, via `-F <file>`. It is useful to allow this for scripted use, or for the upcoming patch to allow (re-)creating octopus merges in `git rebase --rebase-merges`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>