| Age | Commit message (Collapse) | Author |
|---|
|
* jk/warn-on-object-refname-ambiguity:
rev-list: disable object/refname ambiguity check with --stdin
cat-file: restore warn_on_object_refname_ambiguity flag
cat-file: fix a minor memory leak in batch_objects
cat-file: refactor error handling of batch_objects
|
|
Commit 25fba78 turned off the object/refname ambiguity check
during "git cat-file --batch" operations. However, this is a
global flag, so let's restore it when we are done.
This shouldn't make any practical difference, as cat-file
exits immediately afterwards, but is good code hygeine and
would prevent an unnecessary surprise if somebody starts to
call cmd_cat_file later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "cat-file --batch" to show delta-base object name for a
packed object that is represented as a delta.
* jk/oi-delta-base:
cat-file: provide %(deltabase) batch format
sha1_object_info_extended: provide delta base sha1s
|
|
read_sha1_file() that is the workhorse to read the contents given
an object name honoured object replacements, but there is no
corresponding mechanism to sha1_object_info() that is used to
obtain the metainfo (e.g. type & size) about the object, leading
callers to weird inconsistencies.
* cc/replace-object-info:
replace info: rename 'full' to 'long' and clarify in-code symbols
Documentation/git-replace: describe --format option
builtin/replace: unset read_replace_refs
t6050: add tests for listing with --format
builtin/replace: teach listing using short, medium or full formats
sha1_file: perform object replacement in sha1_object_info_extended()
t6050: show that git cat-file --batch fails with replace objects
sha1_object_info_extended(): add an "unsigned flags" parameter
sha1_file.c: add lookup_replace_object_extended() to pass flags
replace_object: don't check read_replace_refs twice
rename READ_SHA1_FILE_REPLACE flag to LOOKUP_REPLACE_OBJECT
|
|
We should always have been freeing our strbuf, but doing so
consistently was annoying until the refactoring in the
previous patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just pulls the return value for the function out of the
inner loop, so we can break out of the loop rather than do
an early return. This will make it easier to put any cleanup
for the function in one place.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be useful for debugging or analysis to see which
objects are stored as delta bases on top of others. This
information is available by running `git verify-pack`, but
that is extremely expensive (and is harder than necessary to
parse).
Instead, let's make it available as a cat-file query format,
which makes it fast and simple to get the bases for a subset
of the objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This parameter is not used yet, but it will be used to tell
sha1_object_info_extended() if it should perform object
replacement or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 98e2092 taught cat-file to stream blobs with --batch,
which requires that we look up the object type before
loading it into memory. As a result, we now print the
object header from information in sha1_object_info, and the
actual contents from the read_sha1_file. We double-check
that the information we printed in the header matches the
content we are about to show.
Later, commit 93d2a60 allowed custom header lines for
--batch, and commit 5b08640 made type lookups optional. As a
result, specifying a header line without the type or size
means that we will not look up those items at all.
This causes our double-checking to erroneously die with an
error; we think the type or size has changed, when in fact
it was simply left at "0".
For the size, we can fix this by only doing the consistency
double-check when we have retrieved the size via
sha1_object_info. In the case that we have not retrieved the
value, that means we also did not print it, so there is
nothing for us to check that we are consistent with.
We could do the same for the type. However, besides our
consistency check, we also care about the type in deciding
whether to stream or not. So instead of handling the case
where we do not know the type, this patch instead makes sure
that we always trigger a type lookup when we are printing,
so that even a format without the type will stream as we
would in the normal case.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently individually pass the sha1, type, and size
fields calculated by sha1_object_info. However, if we pass
the whole struct, the called function can make more
intelligent decisions about which fields were actually
filled by sha1_object_info.
This patch takes that first refactoring step, passing the
whole struct, so further patches can make those decisions
with less noise in their diffs. There should be no
functional change to this patch (aside from a minor typo fix
in the error message).
As a side effect, we can rename the local variables in the
function to "type" and "size", since the names are no longer
taken.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
|
|
Commit c334b87b (cat-file: split --batch input lines on whitespace,
2013-07-11) taught `cat-file --batch-check` to split input lines on
the first whitespace, and stash everything after the first token
into the %(rest) output format element. It claimed:
Object names cannot contain spaces, so any input with
spaces would have resulted in a "missing" line.
But that is not correct. Refs, object sha1s, and various peeling
suffixes cannot contain spaces, but some object names can. In
particular:
1. Tree paths like "[<tree>]:path with whitespace"
2. Reflog specifications like "@{2 days ago}"
3. Commit searches like "rev^{/grep me}" or ":/grep me"
To remain backwards compatible, we cannot split on whitespace by
default, hence we will ship 1.8.4 with the commit reverted.
Resurrect its attempt but in a weaker form; only do the splitting
when "%(rest)" is used in the output format. Since that element did
not exist at all before c334b87, old scripts cannot be affected.
The existence of object names with spaces does mean that you
cannot reliably do:
echo ":path with space and other data" |
git cat-file --batch-check="%(objectname) %(rest)"
as it would split the path and feed only ":path" to get_sha1. But
that command is nonsensical. If you wanted to see "and other data"
in "%(rest)", git cannot possibly know where the filename ends and
the "rest" begins.
It might be more robust to have something like "-z" to separate the
input elements. But this patch is still a reasonable step before
having that. It makes the easy cases easy; people who do not care
about %(rest) do not have to consider it, and the %(rest) code
handles the spaces and newlines of "rev-list --objects" correctly.
Hard cases remain hard but possible (if you might get whitespace in
your input, you do not get to use %(rest) and must split and join
the output yourself using more flexible tools). And most
importantly, it does not preclude us from having different splitting
rules later if a "-z" (or similar) option is added. So we can make
the hard cases easier later, if we choose to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit c334b87b30c1464a1ab563fe1fb8de5eaf0e5bac; the
update assumed that people only used the command to read from
"rev-list --objects" output, whose lines begin with a 40-hex object
name followed by a whitespace, but it turns out that scripts feed
random extended SHA-1 expressions (e.g. "HEAD:$pathname") in which
a whitespace has to be kept.
|
|
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common use of "cat-file --batch-check" is to feed a list
of objects from "rev-list --objects" or a similar command.
In this instance, all of our input objects are 40-byte sha1
ids. However, cat-file has always allowed arbitrary revision
specifiers, and feeds the result to get_sha1().
Fortunately, get_sha1() recognizes a 40-byte sha1 before
doing any hard work trying to look up refs, meaning this
scenario should end up spending very little time converting
the input into an object sha1. However, since 798c35f
(get_sha1: warn about full or short object names that look
like refs, 2013-05-29), when we encounter this case, we
spend the extra effort to do a refname lookup anyway, just
to print a warning. This is further exacerbated by ca91993
(get_packed_ref_cache: reload packed-refs file when it
changes, 2013-06-20), which makes individual ref lookup more
expensive by requiring a stat() of the packed-refs file for
each missing ref.
With no patches, this is the time it takes to run:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectname)' <objects
on the linux.git repository:
real 1m13.494s
user 0m25.924s
sys 0m47.532s
If we revert ca91993, the packed-refs up-to-date check, it
gets a little better:
real 0m54.697s
user 0m21.692s
sys 0m32.916s
but we are still spending quite a bit of time on ref lookup
(and we would not want to revert that patch, anyway, which
has correctness issues). If we revert 798c35f, disabling
the warning entirely, we get a much more reasonable time:
real 0m7.452s
user 0m6.836s
sys 0m0.608s
This patch does the moral equivalent of this final case (and
gets similar speedups). We introduce a global flag that
callers of get_sha1() can use to avoid paying the price for
the warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we get an input line to --batch or --batch-check that
looks like "HEAD foo bar", we will currently feed the whole
thing to get_sha1(). This means that to use --batch-check
with `rev-list --objects`, one must pre-process the input,
like:
git rev-list --objects HEAD |
cut -d' ' -f1 |
git cat-file --batch-check
Besides being more typing and slightly less efficient to
invoke `cut`, the result loses information: we no longer
know which path each object was found at.
This patch teaches cat-file to split input lines at the
first whitespace. Everything to the left of the whitespace
is considered an object name, and everything to the right is
made available as the %(reset) atom. So you can now do:
git rev-list --objects HEAD |
git cat-file --batch-check='%(objectsize) %(rest)'
to collect object sizes at particular paths.
Even if %(rest) is not used, we always do the whitespace
split (which means you can simply eliminate the `cut`
command from the first example above).
This whitespace split is backwards compatible for any
reasonable input. Object names cannot contain spaces, so any
input with spaces would have resulted in a "missing" line.
The only input hurt is if somebody really expected input of
the form "HEAD is a fine-looking ref!" to fail; it will now
parse HEAD, and make "is a fine-looking ref!" available as
%(rest).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This atom is just like %(objectsize), except that it shows
the on-disk size of the object rather than the object's true
size. In other words, it makes the "disk_size" query of
sha1_object_info_extended available via the command-line.
This can be used for rough attribution of disk usage to
particular refs, though see the caveats in the
documentation.
This patch does not include any tests, as the exact numbers
returned are volatile and subject to zlib and packing
decisions. We cannot even reliably guarantee that the
on-disk size is smaller than the object content (though in
general this should be the case for non-trivial objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `cat-file --batch-check` command can be used to quickly
get information about a large number of objects. However, it
provides a fixed set of information.
This patch adds an optional <format> option to --batch-check
to allow a caller to specify which items they are interested
in, and in which order to output them. This is not very
exciting for now, since we provide the same limited set that
you could already get. However, it opens the door to adding
new format items in the future without breaking backwards
compatibility (or forcing callers to pay the cost to
calculate uninteresting items).
Since the --batch option shares code with --batch-check, it
receives the same feature, though it is less likely to be of
interest there.
The format atom names are chosen to match their counterparts
in for-each-ref. Though we do not (yet) share any code with
for-each-ref's formatter, this keeps the interface as
consistent as possible, and may help later on if the
implementations are unified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently use an int to tell us whether --batch parsing
is on, and if so, whether we should print the full object
contents. Let's instead factor this into a struct, filled in
by callback, which will make further batch-related options
easy to add.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The regular "git cat-file -p" and "git cat-file blob" code
paths already learned to stream large blobs. Let's do the
same here.
Note that this means we look up the type and size before
making a decision of whether to load the object into memory
or stream (just like the "-p" code path does). That can lead
to extra work, but it should be dwarfed by the cost of
actually accessing the object itself. In my measurements,
there was a 1-2% slowdown when using "--batch" on a large
number of objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a command is supposed to use textconv filters (by default or with
"--textconv") and none are configured then the blob is output without
conversion; the only exception to this rule is "cat-file --textconv".
Make it behave like the rest of textconv aware commands.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "cat-file -p" prints commits, it shows them in their
raw format, since git's format is already human-readable.
For tags, however, we print the whole thing raw except for
one thing: we convert the timestamp on the tagger line into a
human-readable date.
This dates all the way back to a0f15fa (Pretty-print tagger
dates, 2006-03-01). At that time there was no other way to
pretty-print a tag. These days, however, neither of those
matters much. The normal way to pretty-print a tag is with
"git show", which is much more flexible than "cat-file -p".
Commit a0f15fa also built "verify-tag --verbose" (and
subsequently "tag -v") around the "cat-file -p" output.
However, that behavior was lost in commit 62e09ce (Make git
tag a builtin, 2007-07-20), and we went back to printing
the raw tag contents. Nobody seems to have noticed the bug
since then (and it is arguably a saner behavior anyway, as
it shows the actual bytes for which we verified the
signature).
Let's drop the tagger-date formatting for "cat-file -p". It
makes us more consistent with cat-file's commit
pretty-printer, and as a bonus, we can drop the hand-rolled
tag parsing code in cat-file (which happened to behave
inconsistently with the tag pretty-printing code elsewhere).
This is a change of output format, so it's possible that
some callers could considered this a regression. However,
the original behavior was arguably a bug (due to the
inconsistency with commits), likely nobody was relying on it
(even we do not use it ourselves these days), and anyone
relying on the "-p" pretty-printer should be able to expect
a change in the output format (i.e., while "cat-file" is
plumbing, the output format of "-p" was never guaranteed to
be stable).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After commit cbfd5e1c ("drop some obsolete "x = x" compiler warning
hacks", 21-03-2013) removed a gcc specific hack, older versions of
gcc now issue an "'contents' might be used uninitialized" warning.
In order to suppress the warning, we simply initialize the variable
to NULL in it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cases where the setting and access of a variable are
protected by the same conditional flag, older versions of
gcc would generate a "might be used unitialized" warning. We
silence the warning by initializing the variable to itself,
a hack that gcc recognizes.
Modern versions of gcc are smart enough to get this right,
going back to at least version 4.3.5. gcc 4.1 does get it
wrong in both cases, but is sufficiently old that we
probably don't need to care about it anymore.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
|
|
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
|
|
The function takes user input string and returns the object name
(binary SHA-1) with mode bits and path when the object was looked
up in a tree.
Additionally give hints to help disambiguation of abbreviated object
names when the caller knows what it is looking for.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the userdiff_config function was introduced in be58e70
(diff: unify external diff and funcname parsing code,
2008-10-05), it used a return value convention unlike any
other config callback. Like other callbacks, it used "-1" to
signal error. But it returned "1" to indicate that it found
something, and "0" otherwise; other callbacks simply
returned "0" to indicate that no error occurred.
This distinction was necessary at the time, because the
userdiff namespace overlapped slightly with the color
configuration namespace. So "diff.color.foo" could mean "the
'foo' slot of diff coloring" or "the 'foo' component of the
"color" userdiff driver". Because the color-parsing code
would die on an unknown color slot, we needed the userdiff
code to indicate that it had matched the variable, letting
us bypass the color-parsing code entirely.
Later, in 8b8e862 (ignore unknown color configuration,
2009-12-12), the color-parsing code learned to silently
ignore unknown slots. This means we no longer need to
protect userdiff-matched variables from reaching the
color-parsing code.
We can therefore change the userdiff_config calling
convention to a more normal one. This drops some code from
each caller, which is nice. But more importantly, it reduces
the cognitive load for readers who may wonder why
userdiff_config is unlike every other config callback.
There's no need to add a new test confirming that this
works; t4020 already contains a test that sets
diff.color.external.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
|
|
Make the textconv_object function public, and add --textconv option to cat-file
to perform conversion on blob objects. Using --textconv implies that we are
working on a blob.
As files drivers need to be initialized, a new config is required in addition
to git_default_config. Therefore git_cat_file_config() is introduced
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
