| Age | Commit message (Collapse) | Author |
|---|
|
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
|
|
Update test to reflect changes.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark error messages for translation passed to error() and die()
functions.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark messages for translation printed to stderr.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark plural string for translation using Q_().
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a static initializer for struct checkout and use it throughout the
code base. It's shorter, avoids a memset(3) call and makes sure the
base_dir member is initialized to a valid (empty) string.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "unsigned char sha1[20]" to "struct object_id" conversion
continues. Notable changes in this round includes that ce->sha1,
i.e. the object name recorded in the cache_entry, turns into an
object_id.
It had merge conflicts with a few topics in flight (Christian's
"apply.c split", Dscho's "cat-file --filters" and Jeff Hostetler's
"status --porcelain-v2"). Extra sets of eyes double-checking for
mismerges are highly appreciated.
* bc/object-id:
builtin/reset: convert to use struct object_id
builtin/commit-tree: convert to struct object_id
builtin/am: convert to struct object_id
refs: add an update_ref_oid function.
sha1_name: convert get_sha1_mb to struct object_id
builtin/update-index: convert file to struct object_id
notes: convert init_notes to use struct object_id
builtin/rm: convert to use struct object_id
builtin/blame: convert file to use struct object_id
Convert read_mmblob to take struct object_id.
notes-merge: convert struct notes_merge_pair to struct object_id
builtin/checkout: convert some static functions to struct object_id
streaming: make stream_blob_to_fd take struct object_id
builtin: convert textconv_object to use struct object_id
builtin/cat-file: convert some static functions to struct object_id
builtin/cat-file: convert struct expand_data to use struct object_id
builtin/log: convert some static functions to use struct object_id
builtin/blame: convert struct origin to use struct object_id
builtin/apply: convert static functions to struct object_id
cache: convert struct cache_entry to use struct object_id
|
|
Sometimes we want to apply in a different index file.
Before the apply functionality was libified it was possible to
use the GIT_INDEX_FILE environment variable, for this purpose.
But now, as the apply functionality has been libified, it should
be possible to do that in a libified way.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To libify git apply functionality, we will need to read from a
different index file in get_current_sha1(). This index file will be
stored in "struct apply_state", so let's pass the state to
build_fake_ancestor() which will later pass it to get_current_sha1().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parsing `git apply` options can be useful to other commands that
want to call the libified apply functionality, because this way
they can easily pass some options from their own command line to
the libified apply functionality.
This will be used by `git am` in a following patch.
To make this possible, let's refactor the `git apply` option
parsing code into a new libified apply_parse_options() function.
Doing that makes it possible to remove some functions definitions
from "apply.h" and make them static in "apply.c".
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To avoid printing anything when applying with
`state->apply_verbosity == verbosity_silent`, let's save the
existing warn and error routines before applying, and let's
replace them with a routine that does nothing.
Then after applying, let's restore the saved routines.
Note that, as we need to restore the saved routines in all
cases, we cannot return early any more in apply_all_patches().
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When apply_verbosity is set to verbosity_silent nothing should be
printed on both stderr and stdout.
To avoid printing on stdout, we can just skip calling the following
functions:
- stat_patch_list(),
- numstat_patch_list(),
- summary_patch_list().
It is safe to do that because the above functions have no side
effects other than printing:
- stat_patch_list() only computes some local values and then call
show_stats() and print_stat_summary(), those two functions only
compute local values and call printing functions,
- numstat_patch_list() also only computes local values and calls
printing functions,
- summary_patch_list() calls show_file_mode_name(), printf(),
show_rename_copy(), show_mode_change() that are only printing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes 'int apply_verbosely' into 'enum apply_verbosity', and
changes the possible values of the variable from a bool to
a tristate.
The previous 'false' state is changed into 'verbosity_normal'.
The previous 'true' state is changed into 'verbosity_verbose'.
The new added state is 'verbosity_silent'. It should prevent
anything to be printed on both stderr and stdout.
This is needed because `git am` wants to first call apply
functionality silently, if it can then fall back on 3-way merge
in case of error.
Printing on stdout, and calls to warning() or error() are not
taken care of in this patch, as that will be done in following
patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To avoid possible mistakes and to uniformly show the errno
related messages, let's use error_errno() where possible.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some parsing functions that were used in both "apply.c" and
"builtin/apply.c" are now only used in the former, so they
can be made static to "apply.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As most of the apply code in builtin/apply.c has been libified by a number of
previous commits, it can now be moved to apply.{c,h}, so that more code can
use it.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To libify `git apply` functionality we must make check_apply_state()
usable outside "builtin/apply.c".
Let's do that by moving it into "apply.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To libify `git apply` functionality we have to signal errors to the
caller instead of exit()ing.
To do that in a compatible manner with the rest of the error handling
in "builtin/apply.c", init_apply_state() should return -1 instead of
calling exit().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To libify `git apply` functionality we must make init_apply_state()
usable outside "builtin/apply.c".
Let's do that by moving it into a new "apply.c".
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The --cached mode does not deal with the working tree, so we
should not check it with lstat. An earlier code omitted the
call to lstat but forgot to omit the check for the errno.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A new flag "--cached" takes the cached data, applies the patch
and stores the result in the index, without using the working
tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Somehow --stat showed the new name but --numstat showed the old
name for renamed/copied paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/bindiff:
improve base85 generated assembly code
binary diff and apply: testsuite.
binary diff: further updates.
binary patch.
|
|
When multiple patches are passed to git-apply, it will attempt
to open multiple file descriptors to an index, which means
multiple entries will be in the circular cache_file_list.
This change makes git-apply only open the index once and
write the index at exit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the user interface and generated diff data format.
* "diff --binary" is used to signal that we want an e-mailable
binary patch. It implies --full-index and -p.
* "apply --allow-binary-replacement" acquired a short synonym
"apply --binary".
* After the "GIT binary patch\n" header line there is a token
to record which binary patch mechanism was used, so that we
can extend it later. Currently there are two mechanisms
defined: "literal" and "delta". The former records the
deflated postimage and the latter records the deflated delta
from the preimage to postimage.
For purely implementation convenience, I added the deflated
length after these "literal/delta" tokens (otherwise the
decoding side needs to guess and reallocate the buffer while
inflating). Improvement patches are very welcomed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds "binary patch" to the diff output and teaches apply
what to do with them.
On the diff generation side, traditionally, we said "Binary
files differ\n" without giving anything other than the preimage
and postimage object name on the index line. This was good
enough for applying a patch generated from your own repository
(very useful while rebasing), because the postimage would be
available in such a case. However, this was not useful when the
recipient of such a patch via e-mail were to apply it, even if
the preimage was available.
This patch allows the diff to generate "binary" patch when
operating under --full-index option. The binary patch follows
the usual extended git diff headers, and looks like this:
"GIT binary patch\n"
<length byte><data>"\n"
...
"\n"
Each line is prefixed with a "length-byte", whose value is upper
or lowercase alphabet that encodes number of bytes that the data
on the line decodes to (1..52 -- 'A' means 1, 'B' means 2, ...,
'Z' means 26, 'a' means 27, ...). <data> is 1 or more groups of
5-byte sequence, each of which encodes up to 4 bytes in base85
encoding. Because 52 / 4 * 5 = 65 and we have the length byte,
an output line is capped to 66 characters. The payload is the
same diff-delta as we use in the packfiles.
On the consumption side, git-apply now can decode and apply the
binary patch when --allow-binary-replacement is given, the diff
was generated with --full-index, and the receiving repository
has the preimage blob, which is the same condition as it always
required when accepting an "Binary files differ\n" patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Ok this really should be the good version. The option
handling has been reworked to be automation safe.
Currently to import the -mm tree I have to work around
git-apply by using patch. Because some of Andrews
patches in quilt will only apply with fuzz.
I started out implementing a --fuzz option and then I realized
fuzz is not a very safe concept for an automated system. What
you really want is a minimum number of context lines that must
match. This allows policy to be set without knowing how many
lines of context a patch actually provides. By default
the policy remains to match all provided lines of context.
Allowng git-apply to match a restricted set of context makes
it much easier to import the -mm tree into git. I am still only
processing 1.5 to 1.6 patches a second for the 692 patches in
2.6.17-rc1-mm2 is still painful but it does help.
If I just loop through all of Andrews patches in order
and run git-apply --index -C1 I process the entire patchset
in 1m53s or about 6 patches per second. So running
git-mailinfo, git-write-tree, git-commit-tree, and
git-update-ref everytime has a measurable impact,
and shows things can be speeded up even more.
All of these timings were taking on my poor 700Mhz Athlon
with 512MB of ram. So people with fast machiens should
see much better performance.
When a match is found after the number of context are reduced a
warning is generated. Since this is a rare event and possibly
dangerous this seems to make sense. Unless you are patching
a single file the error message is a little bit terse at
the moment, but it should be easy to go back and fix.
I have also updated the documentation for git-apply to reflect
the new -C option that sets the minimum number of context
lines that must match.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This was triggered by me testing the "@@" numbering shorthand by GNU
patch, which not only showed that git-apply thought it meant the number
was duplicated (when it means that the second number is 1), but my tests
showed than when git-apply mis-understood the number, it would then not
raise an alarm about it if the patch ended early.
Now, this doesn't actually _matter_, since with a three-line context, the
only case that "x,1" will be shorthanded to "x" is when x itself is 1 (in
which case git-apply got it right), but the fact that git-apply would also
silently accept truncated patches was a missed opportunity for additional
sanity-checking.
So make git-apply refuse to look at a patch fragment that ends early.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Sometimes it is convient for a Porcelain to be able to checkout all
unmerged files in all stages so that an external merge tool can be
executed by the Porcelain or the end-user. Using git-unpack-file
on each stage individually incurs a rather high penalty due to the
need to fork for each file version obtained. git-checkout-index -a
--stage=all will now do the same thing, but faster.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We were missing the --whitespace option in the usage string for
git-apply and git-am, so this commit adds them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes the default --whitespace policy to nowarn when we
are only getting --stat, --summary etc. IOW when not applying
the patch. When applying the patch, the default is warn (spit
out warning message but apply the patch).
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Andrew insists --whitespace=warn should be the default, and I
tend to agree. This introduces --whitespace=warn, so if your
project policy is more lenient, you can squelch them by having
apply.whitespace=nowarn in your configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new configuration option apply.whitespace can take one of
"warn", "error", "error-all", or "strip". When git-apply is run
to apply the patch to the index, they are used as the default
value if there is no command line --whitespace option.
Andrew can now tell people who feed him git trees to update to
this version and say:
git repo-config apply.whitespace error
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This by default makes --whitespace=warn, error, and strip to
warn only the first 5 additions of trailing whitespaces. A new
option --whitespace=error-all can be used to view all of them
before applying.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In addition to fixing obvious command line parsing bugs in the
previous round, this changes the following:
* Adds "--whitespace=strip". This applies after stripping the
new trailing whitespaces introduced to the patch.
* The output error message format is changed to say
"patch-filename:linenumber:contents of the line". This makes
it similar to typical compiler error message format, and
helps C-x ` (next-error) in Emacs compilation buffer.
* --whitespace=error and --whitespace=warn do not stop at the
first error. We might want to limit the output to say first
20 such lines to prevent cluttering, but on the other hand if
you are willing to hand-fix after inspecting them, getting
everything with a single run might be easier to work with.
After all, somebody has to do the clean-up work somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On Sat, 25 Feb 2006, Andrew Morton wrote:
>
> I'd suggest a) git will simply refuse to apply such a patch unless given a
> special `forcing' flag, b) even when thus forced, it will still warn and c)
> with a different flag, it will strip-then-apply, without generating a
> warning.
This doesn't do the "strip-then-apply" thing, but it allows you to make
git-apply generate a warning or error on extraneous whitespace.
Use --whitespace=warn to warn, and (surprise, surprise) --whitespace=error
to make it a fatal error to have whitespace at the end.
Totally untested, of course. But it compiles, so it must be fine.
HOWEVER! Note that this literally will check every single patch-line with
"+" at the beginning. Which means that if you fix a simple typo, and the
line had a space at the end before, and you didn't remove it, that's still
considered a "new line with whitespace at the end", even though obviously
the line wasn't really new.
I assume this is what you wanted, and there isn't really any sane
alternatives (you could make the warning activate only for _pure_
additions with no deletions at all in that hunk, but that sounds a bit
insane).
Linus
|
|
* jc/nostat:
cache_name_compare() compares name and stage, nothing else.
"assume unchanged" git: documentation.
ls-files: split "show-valid-bit" into a different option.
"Assume unchanged" git: --really-refresh fix.
ls-files: debugging aid for CE_VALID changes.
"Assume unchanged" git: do not set CE_VALID with --refresh
"Assume unchanged" git
|
|
Some versions of diff do not correctly detect a missing new-line at the end
of the file under certain circumstances.
When defining NO_ACCURATE_DIFF, work around this bug.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds "assume unchanged" logic, started by this message in the list
discussion recently:
<Pine.LNX.4.64.0601311807470.7301@g5.osdl.org>
This is a workaround for filesystems that do not have lstat()
that is quick enough for the index mechanism to take advantage
of. On the paths marked as "assumed to be unchanged", the user
needs to explicitly use update-index to register the object name
to be in the next commit.
You can use two new options to update-index to set and reset the
CE_VALID bit:
git-update-index --assume-unchanged path...
git-update-index --no-assume-unchanged path...
These forms manipulate only the CE_VALID bit; it does not change
the object name recorded in the index file. Nor they add a new
entry to the index.
When the configuration variable "core.ignorestat = true" is set,
the index entries are marked with CE_VALID bit automatically
after:
- update-index to explicitly register the current object name to the
index file.
- when update-index --refresh finds the path to be up-to-date.
- when tools like read-tree -u and apply --index update the working
tree file and register the current object name to the index file.
The flag is dropped upon read-tree that does not check out the index
entry. This happens regardless of the core.ignorestat settings.
Index entries marked with CE_VALID bit are assumed to be
unchanged most of the time. However, there are cases that
CE_VALID bit is ignored for the sake of safety and usability:
- while "git-read-tree -m" or git-apply need to make sure
that the paths involved in the merge do not have local
modifications. This sacrifices performance for safety.
- when git-checkout-index -f -q -u -a tries to see if it needs
to checkout the paths. Otherwise you can never check
anything out ;-).
- when git-update-index --really-refresh (a new flag) tries to
see if the index entry is up to date. You can start with
everything marked as CE_VALID and run this once to drop
CE_VALID bit for paths that are modified.
Most notably, "update-index --refresh" honours CE_VALID and does
not actively stat, so after you modified a file in the working
tree, update-index --refresh would not notice until you tell the
index about it with "git-update-index path" or "git-update-index
--no-assume-unchanged path".
This version is not expected to be perfect. I think diff
between index and/or tree and working files may need some
adjustment, and there probably needs other cases we should
automatically unmark paths that are marked to be CE_VALID.
But the basics seem to work, and ready to be tested by people
who asked for this feature.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
As far as I can see, create_subdirectories() in apply.c just
duplicates the functionality of safe_create_leading_directories() from
sha1_file.c. The former has a warm, fuzzy const parameter, but that's
not important.
The potential problem with EEXIST and creating directories should
never occur here, but will be removed by future
safe_create_leading_directories() changes. Other uses of EEXIST in
apply.c should be fine barring intentionally malicious behavior.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This only applies to traditional diffs, not to git diffs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It can happen if the temporary file already exists (i.e. after a panic
and reboot).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We had errno==EINTR check after read(2)/write(2) sprinkled all
over the places, always doing continue. Consolidate them into
xread()/xwrite() wrapper routines.
Credits for suggestion goes to HPA -- bugs are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When applying a patch to index file, we need to know where GIT_DIR is;
use setup_git_directory() to find it out. This also allows us to work
from a subdirectory if we wanted to.
When git-apply is run from a subdirectory, it applies the given patch
only to the files under the current directory and below.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
