summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-26Allow use of []-wrapped addresses in git://Ilari Liusvaara
Allow using "["<host>"]":<port> and "["<host>"]" notations in git:// host addresses. This is needed to be able to connect to addresses that contain ':' (e.g. numeric IPv6 addresses). Also send the host header []-wrapped so it can actually be parsed by remote end. Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-26Support addresses with ':' in git-daemonIlari Liusvaara
If host address could have ':' in it (e.g. numeric IPv6 address), then host and port could not be uniquely parsed. Fix this by parsing the "["<host>"]":<port> and "["<host>"]" notations. Currently the built-in git:// client would send <host>:<port> or <host> for such thing, but it doesn't matter as due to bugs, resolving address fails if <host> contains ':'. Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Git 1.6.5.8v1.6.5.8Junio C Hamano
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20Merge branch 'jk/maint-1.6.5-reset-hard' into maint-1.6.5Junio C Hamano
* jk/maint-1.6.5-reset-hard: reset: unbreak hard resets with GIT_WORK_TREE
2010-01-20Merge branch 'tr/maint-1.6.5-bash-prompt-show-submodule-changes' into ↵Junio C Hamano
maint-1.6.5 * tr/maint-1.6.5-bash-prompt-show-submodule-changes: bash completion: factor submodules into dirty state
2010-01-20Merge branch 'dp/maint-1.6.5-fast-import-non-commit-tag' into maint-1.6.5Junio C Hamano
* dp/maint-1.6.5-fast-import-non-commit-tag: fast-import: tag may point to any object type
2010-01-20Merge branch 'jm/maint-1.6.5-grep-NUL-terminate' into maint-1.6.5Junio C Hamano
* jm/maint-1.6.5-grep-NUL-terminate: grep: NUL terminate input from a file
2010-01-19Merge branch 'maint-1.6.4' into maint-1.6.5Junio C Hamano
* maint-1.6.4: Fix mis-backport of t7002 base85: Make the code more obvious instead of explaining the non-obvious base85: encode_85() does not use the decode table base85 debug code: Fix length byte calculation checkout -m: do not try to fall back to --merge from an unborn branch branch: die explicitly why when calling "git branch [-a|-r] branchname". textconv: stop leaking file descriptors commit: --cleanup is a message option git count-objects: handle packs bigger than 4G t7102: make the test fail if one of its check fails
2010-01-19Merge branch 'maint-1.6.3' into maint-1.6.4Junio C Hamano
* maint-1.6.3: base85: Make the code more obvious instead of explaining the non-obvious base85: encode_85() does not use the decode table base85 debug code: Fix length byte calculation checkout -m: do not try to fall back to --merge from an unborn branch branch: die explicitly why when calling "git branch [-a|-r] branchname". textconv: stop leaking file descriptors commit: --cleanup is a message option git count-objects: handle packs bigger than 4G t7102: make the test fail if one of its check fails Conflicts: builtin-commit.c
2010-01-19Merge branch 'maint-1.6.2' into maint-1.6.3Junio C Hamano
* maint-1.6.2: base85: Make the code more obvious instead of explaining the non-obvious base85: encode_85() does not use the decode table base85 debug code: Fix length byte calculation checkout -m: do not try to fall back to --merge from an unborn branch branch: die explicitly why when calling "git branch [-a|-r] branchname". textconv: stop leaking file descriptors commit: --cleanup is a message option git count-objects: handle packs bigger than 4G t7102: make the test fail if one of its check fails Conflicts: diff.c
2010-01-19Merge commit 'v1.6.4.4-8-g8de6518' into maint-1.6.4Junio C Hamano
* commit 'v1.6.4.4-8-g8de6518': Fix mis-backport of t7002
2010-01-19Fix mis-backport of t7002Junio C Hamano
The original patch that became cfe370c (grep: do not segfault when -f is used, 2009-10-16), was made against "maint" or newer branch back then, but the fix addressed the issue that was present as far as in 1.6.4 series. The maintainer backported the patch to the 1.6.4 maintenance branch, but failed to notice that the new tests assumed the setup done by the script in "maint", which did quite a lot more than the same test script in 1.6.4 series, and the output didn't match the expected result. This should fix it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-19grep: NUL terminate input from a fileJim Meyering
Internally "git grep" runs regexec(3) that expects its input string to be NUL terminated. When searching inside blob data, read_sha1_file() automatically gives such a buffer, but builtin-grep.c forgot to put the NUL at the end, even though it allocated enough space for it. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-15fast-import: tag may point to any object typeDmitry Potapov
If you tried to export the official git repository, and then to import it back then git-fast-import would die complaining that "Mark :1 not a commit". Accordingly to a generated crash file, Mark 1 is not a commit but a blob, which is pointed by junio-gpg-pub tag. Because git-tag allows to create such tags, git-fast-import should import them. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10Merge branch 'maint-1.6.1' into maint-1.6.2Junio C Hamano
* maint-1.6.1: base85: Make the code more obvious instead of explaining the non-obvious base85: encode_85() does not use the decode table base85 debug code: Fix length byte calculation checkout -m: do not try to fall back to --merge from an unborn branch branch: die explicitly why when calling "git branch [-a|-r] branchname". textconv: stop leaking file descriptors commit: --cleanup is a message option git count-objects: handle packs bigger than 4G t7102: make the test fail if one of its check fails Conflicts: diff.c
2010-01-10Merge branch 'maint-1.6.0' into maint-1.6.1Junio C Hamano
* maint-1.6.0: base85: Make the code more obvious instead of explaining the non-obvious base85: encode_85() does not use the decode table base85 debug code: Fix length byte calculation checkout -m: do not try to fall back to --merge from an unborn branch branch: die explicitly why when calling "git branch [-a|-r] branchname".
2010-01-10base85: Make the code more obvious instead of explaining the non-obviousAndreas Gruenbacher
Here is another cleanup ... Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10base85: encode_85() does not use the decode tableAndreas Gruenbacher
Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-10base85 debug code: Fix length byte calculationAndreas Gruenbacher
Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-07checkout -m: do not try to fall back to --merge from an unborn branchJunio C Hamano
If switching from an unborn branch (= empty tree) to a valid commit failed without -m, it would fail with -m option as well. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-31branch: die explicitly why when calling "git branch [-a|-r] branchname".Matthieu Moy
The -a and -r options used to be silently ignored in such a command. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-31bash completion: factor submodules into dirty stateThomas Rast
In the implementation of GIT_PS1_SHOWDIRTYSTATE in 738a94a (bash: offer to show (un)staged changes, 2009-02-03), I cut&pasted the git-diff invocations from dirty-worktree checks elsewhere, carrying along the --ignore-submodules option. As pointed out by Kevin Ballard, this doesn't really make sense: to the _user_, a changed submodule counts towards uncommitted changes. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-30textconv: stop leaking file descriptorsJeff King
We read the output from textconv helpers over a pipe, but we never actually closed our end of the pipe after using it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-30reset: unbreak hard resets with GIT_WORK_TREEJeff King
Commit 952dfc6 tried to tighten the safety valves for doing a "reset --hard" in a bare repository or outside the work tree, but accidentally broke the case for GIT_WORK_TREE. This patch unbreaks it. Most git commands which need a work tree simply use NEED_WORK_TREE in git.c to die before they get to their cmd_* function. Reset, however, only needs a work tree in some cases, and so must handle the work tree itself. The error that 952dfc6 made was to simply forbid certain operations if the work tree was not set up; instead, we need to do the same thing that NEED_WORK_TREE does, which is to call setup_work_tree(). We no longer have to worry about dying in the non-worktree case, as setup_work_tree handles that for us. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-30Merge branch 'maint-1.6.0' into maint-1.6.1Junio C Hamano
* maint-1.6.0: commit: --cleanup is a message option t7102: make the test fail if one of its check fails
2009-12-30commit: --cleanup is a message optionGreg Price
In the usage message for "git commit", the --cleanup option appeared at the end, as one of the "contents options": usage: git commit [options] [--] <filepattern>... ... Commit message options ... Commit contents options ... --allow-empty ok to record an empty change --cleanup <default> how to strip spaces and #comments from message This is confusing, in part because it makes it ambiguous whether --allow-empty, just above, refers to an empty diff or an empty message. Move --cleanup into the 'message options' group. Also add a pair of comments to prevent similar oversights in the future. Signed-off-by: Greg Price <price@ksplice.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-30git count-objects: handle packs bigger than 4GAndreas Schwab
Use off_t to count sizes of packs and objects to avoid overflow after 4Gb. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-30t7102: make the test fail if one of its check failsNguyễn Thái Ngọc Duy
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-22Prevent git blame from segfaulting on a missing author nameDavid Reiss
The human-readable author and committer name can be missing from commits imported from foreign SCM interfaces. Make sure we parse the "author" and "committer" line a bit more leniently and avoid segfaulting by assuming the name always exists. Signed-off-by: David Reiss <dreiss@facebook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-20rebase -i: abort cleanly if the editor fails to launchBjörn Gustavsson
If the user's configured editor is emacsclient, the editor will fail to launch if emacs is not running and the git command that tried to lanuch the editor will abort. For most commands, all you have to do is to start emacs and repeat the command. The "git rebase -i" command, however, aborts without cleaning the "$GIT_DIR/rebase-merge" directory if it fails to launch the editor, so you'll need to do "git rebase --abort" before repeating the rebase command. Change "git rebase -i" to terminate using "die_abort" (instead of with "die") if the initial launch of the editor fails. Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-18technical-docs: document hash APIStephen Boyd
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-18api-strbuf.txt: fix typos and document launch_editor()Stephen Boyd
Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16Git 1.6.5.7v1.6.5.7Junio C Hamano
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16worktree: don't segfault with an absolute pathspec without a work treeJunio C Hamano
If a command is run with an absolute path as a pathspec inside a bare repository, e.g. "rev-list HEAD -- /home", the code tried to run strlen() on NULL, which is the result of get_git_work_tree(), and segfaulted. It should just fail instead. Currently the function returns NULL even inside .git/ in a repository with a work tree, but that is a separate issue. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16ignore unknown color configurationJeff King
When parsing the config file, if there is a value that is syntactically correct but unused, we generally ignore it. This lets non-core porcelains store arbitrary information in the config file, and it means that configuration files can be shared between new and old versions of git (the old versions might simply ignore certain configuration). The one exception to this is color configuration; if we encounter a color.{diff,branch,status}.$slot variable, we die if it is not one of the recognized slots (presumably as a safety valve for user misconfiguration). This behavior has existed since 801235c (diff --color: use $GIT_DIR/config, 2006-06-24), but hasn't yet caused a problem. No porcelain has wanted to store extra colors, and we once a color area (like color.diff) has been introduced, we've never changed the set of color slots. However, that changed recently with the addition of color.diff.func. Now a user with color.diff.func in their config can no longer freely switch between v1.6.6 and older versions; the old versions will complain about the existence of the variable. This patch loosens the check to match the rest of git-config; unknown color slots are simply ignored. This doesn't fix this particular problem, as the older version (without this patch) is the problem, but it at least prevents it from happening again in the future. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-16help.autocorrect: do not run a command if the command given is junkJohannes Sixt
If a given command is not found, then help.c tries to guess which one the user could have meant. If help.autocorrect is 0 or unset, then a list of suggestions is given as long as the dissimilarity between the given command and the candidates is not excessively high. But if help.autocorrect was non-zero (i.e., a delay after which the command is run automatically), the latter restriction on dissimilarity was not obeyed. In my case, this happened: $ git ..daab02 WARNING: You called a Git command named '..daab02', which does not exist. Continuing under the assumption that you meant 'read-tree' in 4.0 seconds automatically... The patch reuses the similarity limit that is also applied when the list of suggested commands is printed. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-15Illustrate "filter" attribute with an exampleNanako Shiraishi
The example was taken from aa4ed402c9721170fde2e9e43c3825562070e65e (Add 'filter' attribute and external filter driver definition). Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-10Git 1.6.5.6v1.6.5.6Junio C Hamano
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-10Fix archive format with -- on the command lineJunio C Hamano
Giving --format from the command line, or using output file extention to DWIM the output format, with a pathspec that is disambiguated with an explicit double-dash on the command line, e.g. git archive -o file --format=zip HEAD -- path git archive -o file.zip HEAD -- path didn't work correctly. This was because the code reordered (when one was given) or added (when the format was inferred) a --format argument at the end, effectively making it to "archive HEAD -- path --format=zip", i.e. an extra pathspec that is unlikely to match anything. The command line argument list should always be "options, revs and then paths", and we should set a good example by inserting the --format at the beginning instead. Reported-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-10Remove post-upload-hookJunio C Hamano
This hook runs after "git fetch" in the repository the objects are fetched from as the user who fetched, and has security implications. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-09Merge branch 'mm/maint-merge-ff-error-message-fix' into maintJunio C Hamano
* mm/maint-merge-ff-error-message-fix: builtin-merge: show user-friendly error messages for fast-forward too. merge-recursive: make the error-message generation an extern function Conflicts: merge-recursive.c
2009-12-09Merge branch 'jn/maint-pull-rebase-error-message' into maintJunio C Hamano
* jn/maint-pull-rebase-error-message: pull: clarify advice for the unconfigured error case
2009-12-09Merge branch 'jk/maint-add-p-delete-fix' into maintJunio C Hamano
* jk/maint-add-p-delete-fix: add-interactive: fix deletion of non-empty files
2009-12-08add-interactive: fix deletion of non-empty filesJeff King
Commit 24ab81a fixed the deletion of empty files, but broke deletion of non-empty files. The approach it took was to factor out the "deleted" line from the patch header into its own hunk, the same way we do for mode changes. However, unlike mode changes, we only showed the special "delete this file" hunk if there were no other hunks. Otherwise, the user would annoyingly be presented with _two_ hunks: one for deleting the file and one for deleting the content. This meant that in the non-empty case, we forgot about the deleted line entirely, and we submitted a bogus patch to git-apply (with "/dev/null" as the destination file, but not marked as a deletion). Instead, this patch combines the file deletion hunk and the content deletion hunk (if there is one) into a single deletion hunk which is either staged or not. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05Git 1.6.5.5v1.6.5.5Junio C Hamano
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05Fix diff -B/--dirstat miscounting of newly added contentsLinus Torvalds
What used to happen is that diffcore_count_changes() simply ignored any hashes in the destination that didn't match hashes in the source. EXCEPT if the source hash didn't exist at all, in which case it would count _one_ destination hash that happened to have the "next" hash value. As a consequence, newly added material was often undercounted, making output from --dirstat and "complete rewrite" detection used by -B unrelialble. This changes it so that: - whenever it bypasses a destination hash (because it doesn't match a source), it counts the bytes associated with that as "literal added" - at the end (once we have used up all the source hashes), we do the same thing with the remaining destination hashes. - when hashes do match, and we use the difference in counts as a value, we also use up that destination hash entry (the 'd++'). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05reset: improve worktree safety valvesJeff King
The existing code checked to make sure we were not in a bare repository when doing a hard reset. However, we should take this one step further, and make sure we are in a worktree. Otherwise, we can end up munging files inside of '.git'. Furthermore, we should do the same check for --merge resets, which have the same properties. Actually, a merge reset of HEAD^ would already complain, since further down in the code we want a worktree. However, it is nicer to check up-front; then we are sure we cover all cases ("git reset --merge" would run, even though it wasn't doing anything) and we can give a more specific message. Add tests to t7103 to cover these cases and some missing ones. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-05Documentation: Avoid use of xmlto --stringparamTodd Zullinger
The --stringparam option is not available on older xmlto versions. Instead, set man.base.url.for.relative.links via a .xsl file. Older docbook versions will ignore this without causing grief to users of older xmlto versions. Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-04archive: clarify description of path parameterRené Scharfe
Mention that path parameters are based on the current working directory. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> -- Documentation/git-archive.txt | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-04rerere: don't segfault on failure to open rr-cacheJeff King
The rr-cache directory should always exist if we are doing garbage collection (earlier code paths check this explicitly), but we may not necessarily succeed in opening it (for example, due to permissions problems). In that case, we should print an error message rather than simply segfaulting. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v0.10.2-6-g49f6 at 2024-05-10 11:03:52 (GMT)