| Age | Commit message (Collapse) | Author |
|---|
|
If a replace ref already exists for an object, it is
much better for the user if we error out before we
let the user edit the object, rather than after.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will be useful in a following commit when we will
want to check if the ref already exists before we let the
user edit an object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's a bad idea to create a replace ref for an object
that points to the original object itself.
That's why we have to check if the result from editing
the original object is a different object and error out
if it isn't.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows you to run:
git replace --edit SHA1
to get dumped in an editor with the contents of the object
for SHA1. The result is then read back in and used as a
"replace" object for SHA1. The writing/reading is
type-aware, so you get to edit "ls-tree" output rather than
the binary tree format.
Missing documentation and tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we add new options that operate on objects before
replacing them, we'll want to be able to feed raw sha1s
straight into replace_object. Split replace_object into the
object-resolution part and the actual replacement.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By using OPT_CMDMODE, the mutual exclusion between modes is
taken care of for us. It also makes it easy for us to
maintain a single variable with the mode, which makes its
intent more clear. We can use a single switch() to make sure
we have covered all of the modes.
This ends up breaking even in code size, but the win will be
much bigger when we start adding more modes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-replace command has three modes: listing, deleting,
and replacing. The first two are selected explicitly. If
none is selected, we fallback to listing when there are no
arguments, and replacing otherwise.
Let's figure out up front which operation we are going to
do, before getting into the application logic. That lets us
simplify our option checks (e.g., we currently have to check
whether a useless "--force" is given both along with an
explicit list, as well as with an implicit one).
This saves some lines, makes the logic easier to follow, and
will facilitate further cleanups.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
|
|
Crash fix for codepath that miscounted the necessary size for an
array when spawning an external diff program.
* 'jk/external-diff-use-argv-array' (early part):
run_external_diff: use an argv_array for the command line
|
|
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A last minute (and hopefully the last) fix to avoid coredumps due
to an incorrect pointer arithmetic.
* jk/pack-bitmap:
ewah_bitmap.c: do not assume size_t and eword_t are the same size
|
|
Make sure the marks are not written out when the transport helper
did not finish happily, to avoid leaving a marks file that is out of
sync with the reality.
* fc/transport-helper-sync-error-fix:
t5801 (remote-helpers): cleanup environment sets
transport-helper: fix sync issue on crashes
transport-helper: trivial cleanup
transport-helper: propagate recvline() error pushing
remote-helpers: make recvline return an error
transport-helper: remove barely used xchgline()
|
|
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
|
|
When buffer_grow changes the size of the buffer using realloc,
it first computes and saves the rlw pointer's offset into the
buffer using (uint8_t *) math before the realloc but then
restores it using (eword_t *) math.
In order to do this it's necessary to convert the (uint8_t *)
offset into an (eword_t *) offset. It was doing this by
dividing by the sizeof(size_t). Unfortunately sizeof(size_t)
is not same as sizeof(eword_t) on all platforms.
This causes illegal memory accesses and other bad things to
happen when attempting to use bitmaps on those platforms.
Fix this by dividing by the sizeof(eword_t) instead which
will always be correct for all platforms.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* git://bogomips.org/git-svn:
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
|
|
* jx/i18n:
i18n: mention "TRANSLATORS:" marker in Documentation/CodingGuidelines
i18n: only extract comments marked with "TRANSLATORS:"
i18n: remove obsolete comments for translators in diffstat generation
i18n: fix uncatchable comments for translators in date.c
|
|
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
|
|
* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
|
|
Commit 512477b (tests: use "env" to run commands with temporary env-var
settings) missed some variables in the remote-helpers test. Also
standardize these.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently generate the command-line for the external
command using a fixed-length array of size 10. But if there
is a rename, we actually need 11 elements (10 items, plus a
NULL), and end up writing a random NULL onto the stack.
Rather than bump the limit, let's just use an argv_array, which
makes this sort of error impossible.
Noticed-by: Max L <infthi.inbox@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
|
|
An early-preview for the upcoming Git 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Squelch a false compiler warning from older gcc.
* jk/config-die-bad-number-noreturn:
config.c: mark die_bad_number as NORETURN
|
|
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir
|
|
* fc/complete-aliased-push:
completion: fix completing args of aliased "push", "fetch", etc.
|
|
* fc/prompt-zsh-read-from-file:
prompt: fix missing file errors in zsh
|
|
These comments have to have "TRANSLATORS: " at the very beginning
and have to deviate from the usual multi-line comment formatting
convention.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When extract l10n messages, we use "--add-comments" option to keep
comments right above the l10n messages for references. But sometimes
irrelevant comments are also extracted. For example in the following
code block, the comment in line 2 will be extracted as comment for the
l10n message in line 3, but obviously it's wrong.
{ OPTION_CALLBACK, 0, "ignore-removal", &addremove_explicit,
NULL /* takes no arguments */,
N_("ignore paths removed in the working tree (same as
--no-all)"),
PARSE_OPT_NOARG, ignore_removal_cb },
Since almost all comments for l10n translators are marked with the same
prefix (tag): "TRANSLATORS:", it's safe to only extract comments with
this special tag. I.E. it's better to call xgettext as:
xgettext --add-comments=TRANSLATORS: ...
Also tweaks the multi-line comment in "init-db.c", to make it start with
the proper tag, not "* TRANSLATORS:" (which has a star before the tag).
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we do not translate diffstat any more, remove the obsolete comments.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Comment for l10n translators can not be extracted by xgettext if it
is not right above the l10n tag. Moving the comment right before
the l10n tag will fix this issue.
Reported-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 99855ddf4bd319cd06a0524e755ab1c1b7d39f3b.
The workaround 99855ddf introduced to deal with problematic
"return" statements in scripts run by "dot" commands located
inside functions only handles one part of the problem. The
issue has now been addressed by not using "return" statements
in this way in the git-rebase--*.sh scripts.
This workaround is therefore no longer necessary, so clean
up the code by reverting it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since a1549e10, 15d4bf2e and 01a1e646 (first appearing in v1.8.4)
the git-rebase--*.sh scripts have used a "return" to stop execution
of the dot-sourced file and return to the "dot" command that
dot-sourced it. The /bin/sh utility on FreeBSD however behaves
poorly under some circumstances when such a "return" is executed.
In particular, if the "dot" command is contained within a function,
then when a "return" is executed by the script it runs (that is not
itself inside a function), control will return from the function
that contains the "dot" command skipping any statements that might
follow the dot command inside that function. Commit 99855ddf (first
appearing in v1.8.4.1) addresses this by making the "dot" command
the last line in the function.
Unfortunately the FreeBSD /bin/sh may also execute some statements
in the script run by the "dot" command that appear after the
troublesome "return". The fix in 99855ddf does not address this
problem.
For example, if you have script1.sh with these contents:
run_script2() {
. "$(dirname -- "$0")/script2.sh"
_e=$?
echo only this line should show
[ $_e -eq 5 ] || echo expected status 5 got $_e
return 3
}
run_script2
e=$?
[ $e -eq 3 ] || { echo expected status 3 got $e; exit 1; }
And script2.sh with these contents:
if [ 5 -gt 3 ]; then
return 5
fi
case bad in *)
echo always shows
esac
echo should not get here
! :
When running script1.sh (e.g. '/bin/sh script1.sh' or './script1.sh'
after making it executable), the expected output from a POSIX shell
is simply the single line:
only this line should show
However, when run using FreeBSD's /bin/sh, the following output
appears instead:
should not get here
expected status 3 got 1
Not only did the lines following the "dot" command in the run_script2
function in script1.sh get skipped, but additional lines in script2.sh
following the "return" got executed -- but not all of them (e.g. the
"echo always shows" line did not run).
These issues can be avoided by not using a top-level "return" in
script2.sh. If script2.sh is changed to this:
main() {
if [ 5 -gt 3 ]; then
return 5
fi
case bad in *)
echo always shows
esac
echo should not get here
! :
}
main
Then it behaves the same when using FreeBSD's /bin/sh as when using
other more POSIX compliant /bin/sh implementations.
We fix the git-rebase--*.sh scripts in a similar fashion by moving
the top-level code that contains "return" statements into its own
function and then calling that as the last line in the script.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mh/multimail:
git-multimail: update to version 1.0.0
|
