diff options
Diffstat (limited to 't')
92 files changed, 2218 insertions, 486 deletions
diff --git a/t/.gitignore b/t/.gitignore index 348715f..91cf577 100644 --- a/t/.gitignore +++ b/t/.gitignore @@ -2,3 +2,4 @@ /test-results /.prove /chainlinttmp +/out/ @@ -170,6 +170,15 @@ appropriately before running "make". implied by other options like --valgrind and GIT_TEST_INSTALLED. +--no-bin-wrappers:: + By default, the test suite uses the wrappers in + `../bin-wrappers/` to execute `git` and friends. With this option, + `../git` and friends are run directly. This is not recommended + in general, as the wrappers contain safeguards to ensure that no + files from an installed Git are used, but can speed up test runs + especially on platforms where running shell scripts is expensive + (most notably, Windows). + --root=<directory>:: Create "trash" directories used to store all temporary data during testing under <directory>, instead of the t/ directory. @@ -186,6 +195,22 @@ appropriately before running "make". this feature by setting the GIT_TEST_CHAIN_LINT environment variable to "1" or "0", respectively. +--stress:: +--stress=<N>:: + Run the test script repeatedly in multiple parallel jobs until + one of them fails. Useful for reproducing rare failures in + flaky tests. The number of parallel jobs is, in order of + precedence: <N>, or the value of the GIT_TEST_STRESS_LOAD + environment variable, or twice the number of available + processors (as shown by the 'getconf' utility), or 8. + Implies `--verbose -x --immediate` to get the most information + about the failure. Note that the verbose output of each test + job is saved to 't/test-results/$TEST_NAME.stress-<nr>.out', + and only the output of the failed test job is shown on the + terminal. The names of the trash directories get a + '.stress-<nr>' suffix, and the trash directory of the failed + test job is renamed to end with a '.stress-failed' suffix. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various @@ -342,6 +367,10 @@ GIT_TEST_INDEX_VERSION=<n> exercises the index read/write code path for the index version specified. Can be set to any valid version (currently 2, 3, or 4). +GIT_TEST_PACK_SPARSE=<boolean> if enabled will default the pack-objects +builtin to use the sparse object walk. This can still be overridden by +the --no-sparse command-line argument. + GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path by overriding the minimum number of cache entries required per thread. @@ -358,6 +387,11 @@ GIT_TEST_MULTI_PACK_INDEX=<boolean>, when true, forces the multi-pack- index to be written after every 'git repack' command, and overrides the 'core.multiPackIndex' setting to true. +GIT_TEST_SIDEBAND_ALL=<boolean>, when true, overrides the +'uploadpack.allowSidebandAll' setting to true, and when false, forces +fetch-pack to not request sideband-all (even if the server advertises +sideband-all). + Naming Tests ------------ @@ -425,7 +459,8 @@ This test harness library does the following things: - Creates an empty test directory with an empty .git/objects database and chdir(2) into it. This directory is 't/trash directory.$test_name_without_dotsh', with t/ subject to change by - the --root option documented above. + the --root option documented above, and a '.stress-<N>' suffix + appended by the --stress option. - Defines standard test helper functions for your scripts to use. These functions are designed to make all scripts behave diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index b45bdac..166d64d 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -35,7 +35,8 @@ while (<>) { chomp; } - /\bsed\s+-i/ and err 'sed -i is not portable'; + /\bcp\s+-a/ and err 'cp -a is not portable'; + /\bsed\s+-[^efn]\s+/ and err 'sed option not portable (use only -n, -e, -f)'; /\becho\s+-[neE]/ and err 'echo with option is not portable (use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (use type)'; diff --git a/t/helper/test-date.c b/t/helper/test-date.c index a083737..b325380 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -3,10 +3,12 @@ static const char *usage_msg = "\n" " test-tool date relative [time_t]...\n" +" test-tool date human [time_t]...\n" " test-tool date show:<format> [time_t]...\n" " test-tool date parse [date]...\n" " test-tool date approxidate [date]...\n" " test-tool date timestamp [date]...\n" +" test-tool date getnanos [start-nanos]\n" " test-tool date is64bit\n" " test-tool date time_t-is64bit\n"; @@ -16,12 +18,20 @@ static void show_relative_dates(const char **argv, struct timeval *now) for (; *argv; argv++) { time_t t = atoi(*argv); - show_date_relative(t, 0, now, &buf); + show_date_relative(t, now, &buf); printf("%s -> %s\n", *argv, buf.buf); } strbuf_release(&buf); } +static void show_human_dates(const char **argv) +{ + for (; *argv; argv++) { + time_t t = atoi(*argv); + printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(HUMAN))); + } +} + static void show_dates(const char **argv, const char *format) { struct date_mode mode; @@ -82,12 +92,21 @@ static void parse_approx_timestamp(const char **argv, struct timeval *now) } } +static void getnanos(const char **argv) +{ + double seconds = getnanotime() / 1.0e9; + + if (*argv) + seconds -= strtod(*argv, NULL); + printf("%lf\n", seconds); +} + int cmd__date(int argc, const char **argv) { struct timeval now; const char *x; - x = getenv("TEST_DATE_NOW"); + x = getenv("GIT_TEST_DATE_NOW"); if (x) { now.tv_sec = atoi(x); now.tv_usec = 0; @@ -100,6 +119,8 @@ int cmd__date(int argc, const char **argv) usage(usage_msg); if (!strcmp(*argv, "relative")) show_relative_dates(argv+1, &now); + else if (!strcmp(*argv, "human")) + show_human_dates(argv+1); else if (skip_prefix(*argv, "show:", &x)) show_dates(argv+1, x); else if (!strcmp(*argv, "parse")) @@ -108,6 +129,8 @@ int cmd__date(int argc, const char **argv) parse_approxidate(argv+1, &now); else if (!strcmp(*argv, "timestamp")) parse_approx_timestamp(argv+1, &now); + else if (!strcmp(*argv, "getnanos")) + getnanos(argv+1); else if (!strcmp(*argv, "is64bit")) return sizeof(timestamp_t) == 8 ? 0 : 1; else if (!strcmp(*argv, "time_t-is64bit")) diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c index 08e3684..2786f47 100644 --- a/t/helper/test-dump-fsmonitor.c +++ b/t/helper/test-dump-fsmonitor.c @@ -3,11 +3,11 @@ int cmd__dump_fsmonitor(int ac, const char **av) { - struct index_state *istate = &the_index; + struct index_state *istate = the_repository->index; int i; setup_git_directory(); - if (do_read_index(istate, get_index_file(), 0) < 0) + if (do_read_index(istate, the_repository->index_file, 0) < 0) die("unable to read index file"); if (!istate->fsmonitor_last_update) { printf("no fsmonitor\n"); diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index 52870eb..cf0f2c7 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -1,3 +1,4 @@ +#define USE_THE_INDEX_COMPATIBILITY_MACROS #include "test-tool.h" #include "cache.h" #include "dir.h" diff --git a/t/helper/test-hash-speed.c b/t/helper/test-hash-speed.c new file mode 100644 index 0000000..432233c --- /dev/null +++ b/t/helper/test-hash-speed.c @@ -0,0 +1,61 @@ +#include "test-tool.h" +#include "cache.h" + +#define NUM_SECONDS 3 + +static inline void compute_hash(const struct git_hash_algo *algo, git_hash_ctx *ctx, uint8_t *final, const void *p, size_t len) +{ + algo->init_fn(ctx); + algo->update_fn(ctx, p, len); + algo->final_fn(final, ctx); +} + +int cmd__hash_speed(int ac, const char **av) +{ + git_hash_ctx ctx; + unsigned char hash[GIT_MAX_RAWSZ]; + clock_t initial, start, end; + unsigned bufsizes[] = { 64, 256, 1024, 8192, 16384 }; + int i; + void *p; + const struct git_hash_algo *algo = NULL; + + if (ac == 2) { + for (i = 1; i < GIT_HASH_NALGOS; i++) { + if (!strcmp(av[1], hash_algos[i].name)) { + algo = &hash_algos[i]; + break; + } + } + } + if (!algo) + die("usage: test-tool hash-speed algo_name"); + + /* Use this as an offset to make overflow less likely. */ + initial = clock(); + + printf("algo: %s\n", algo->name); + + for (i = 0; i < ARRAY_SIZE(bufsizes); i++) { + unsigned long j, kb; + double kb_per_sec; + p = xcalloc(1, bufsizes[i]); + start = end = clock() - initial; + for (j = 0; ((end - start) / CLOCKS_PER_SEC) < NUM_SECONDS; j++) { + compute_hash(algo, &ctx, hash, p, bufsizes[i]); + + /* + * Only check elapsed time every 128 iterations to avoid + * dominating the runtime with system calls. + */ + if (!(j & 127)) + end = clock() - initial; + } + kb = j * bufsizes[i]; + kb_per_sec = kb / (1024 * ((double)end - start) / CLOCKS_PER_SEC); + printf("size %u: %lu iters; %lu KiB; %0.2f KiB/s\n", bufsizes[i], j, kb, kb_per_sec); + free(p); + } + + exit(0); +} diff --git a/t/helper/test-hash.c b/t/helper/test-hash.c new file mode 100644 index 0000000..0a31de6 --- /dev/null +++ b/t/helper/test-hash.c @@ -0,0 +1,58 @@ +#include "test-tool.h" +#include "cache.h" + +int cmd_hash_impl(int ac, const char **av, int algo) +{ + git_hash_ctx ctx; + unsigned char hash[GIT_MAX_HEXSZ]; + unsigned bufsz = 8192; + int binary = 0; + char *buffer; + const struct git_hash_algo *algop = &hash_algos[algo]; + + if (ac == 2) { + if (!strcmp(av[1], "-b")) + binary = 1; + else + bufsz = strtoul(av[1], NULL, 10) * 1024 * 1024; + } + + if (!bufsz) + bufsz = 8192; + + while ((buffer = malloc(bufsz)) == NULL) { + fprintf(stderr, "bufsz %u is too big, halving...\n", bufsz); + bufsz /= 2; + if (bufsz < 1024) + die("OOPS"); + } + + algop->init_fn(&ctx); + + while (1) { + ssize_t sz, this_sz; + char *cp = buffer; + unsigned room = bufsz; + this_sz = 0; + while (room) { + sz = xread(0, cp, room); + if (sz == 0) + break; + if (sz < 0) + die_errno("test-hash"); + this_sz += sz; + cp += sz; + room -= sz; + } + if (this_sz == 0) + break; + algop->update_fn(&ctx, buffer, this_sz); + } + algop->final_fn(hash, &ctx); + + if (binary) + fwrite(hash, 1, algop->rawsz, stdout); + else + puts(hash_to_hex_algop(hash, algop)); + exit(0); +} diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index ae091d9..5d543ad 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -177,6 +177,14 @@ static int is_dotgitmodules(const char *path) return is_hfs_dotgitmodules(path) || is_ntfs_dotgitmodules(path); } +static int cmp_by_st_size(const void *a, const void *b) +{ + intptr_t x = (intptr_t)((struct string_list_item *)a)->util; + intptr_t y = (intptr_t)((struct string_list_item *)b)->util; + + return x > y ? -1 : (x < y ? +1 : 0); +} + int cmd__path_utils(int argc, const char **argv) { if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { @@ -291,6 +299,62 @@ int cmd__path_utils(int argc, const char **argv) return !!res; } + if (argc > 2 && !strcmp(argv[1], "file-size")) { + int res = 0, i; + struct stat st; + + for (i = 2; i < argc; i++) + if (stat(argv[i], &st)) + res = error_errno("Cannot stat '%s'", argv[i]); + else + printf("%"PRIuMAX"\n", (uintmax_t)st.st_size); + return !!res; + } + + if (argc == 4 && !strcmp(argv[1], "skip-n-bytes")) { + int fd = open(argv[2], O_RDONLY), offset = atoi(argv[3]); + char buffer[65536]; + + if (fd < 0) + die_errno("could not open '%s'", argv[2]); + if (lseek(fd, offset, SEEK_SET) < 0) + die_errno("could not skip %d bytes", offset); + for (;;) { + ssize_t count = read(fd, buffer, sizeof(buffer)); + if (count < 0) + die_errno("could not read '%s'", argv[2]); + if (!count) + break; + if (write(1, buffer, count) < 0) + die_errno("could not write to stdout"); + } + close(fd); + return 0; + } + + if (argc > 5 && !strcmp(argv[1], "slice-tests")) { + int res = 0; + long offset, stride, i; + struct string_list list = STRING_LIST_INIT_NODUP; + struct stat st; + + offset = strtol(argv[2], NULL, 10); + stride = strtol(argv[3], NULL, 10); + if (stride < 1) + stride = 1; + for (i = 4; i < argc; i++) + if (stat(argv[i], &st)) + res = error_errno("Cannot stat '%s'", argv[i]); + else + string_list_append(&list, argv[i])->util = + (void *)(intptr_t)st.st_size; + QSORT(list.items, list.nr, cmp_by_st_size); + for (i = offset; i < list.nr; i+= stride) + printf("%s\n", list.items[i].string); + + return !!res; + } + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], argv[1] ? argv[1] : "(there was none)"); return 1; diff --git a/t/helper/test-ref-store.c b/t/helper/test-ref-store.c index e9e0541..799fc00 100644 --- a/t/helper/test-ref-store.c +++ b/t/helper/test-ref-store.c @@ -233,7 +233,7 @@ static int cmd_update_ref(struct ref_store *refs, const char **argv) { const char *msg = notnull(*argv++, "msg"); const char *refname = notnull(*argv++, "refname"); - const char *new_sha1_buf = notnull(*argv++, "old-sha1"); + const char *new_sha1_buf = notnull(*argv++, "new-sha1"); const char *old_sha1_buf = notnull(*argv++, "old-sha1"); unsigned int flags = arg_flags(*argv++, "flags"); struct object_id old_oid; diff --git a/t/helper/test-repository.c b/t/helper/test-repository.c index 6a84a53..f7f8618 100644 --- a/t/helper/test-repository.c +++ b/t/helper/test-repository.c @@ -17,6 +17,11 @@ static void test_parse_commit_in_graph(const char *gitdir, const char *worktree, setup_git_env(gitdir); + memset(the_repository, 0, sizeof(*the_repository)); + + /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ + repo_set_hash_algo(the_repository, GIT_HASH_SHA1); + if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); @@ -43,6 +48,11 @@ static void test_get_commit_tree_in_graph(const char *gitdir, setup_git_env(gitdir); + memset(the_repository, 0, sizeof(*the_repository)); + + /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ + repo_set_hash_algo(the_repository, GIT_HASH_SHA1); + if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); diff --git a/t/helper/test-sha1.c b/t/helper/test-sha1.c index 1ba0675..d860c38 100644 --- a/t/helper/test-sha1.c +++ b/t/helper/test-sha1.c @@ -3,55 +3,5 @@ int cmd__sha1(int ac, const char **av) { - git_SHA_CTX ctx; - unsigned char sha1[20]; - unsigned bufsz = 8192; - int binary = 0; - char *buffer; - - if (ac == 2) { - if (!strcmp(av[1], "-b")) - binary = 1; - else - bufsz = strtoul(av[1], NULL, 10) * 1024 * 1024; - } - - if (!bufsz) - bufsz = 8192; - - while ((buffer = malloc(bufsz)) == NULL) { - fprintf(stderr, "bufsz %u is too big, halving...\n", bufsz); - bufsz /= 2; - if (bufsz < 1024) - die("OOPS"); - } - - git_SHA1_Init(&ctx); - - while (1) { - ssize_t sz, this_sz; - char *cp = buffer; - unsigned room = bufsz; - this_sz = 0; - while (room) { - sz = xread(0, cp, room); - if (sz == 0) - break; - if (sz < 0) - die_errno("test-sha1"); - this_sz += sz; - cp += sz; - room -= sz; - } - if (this_sz == 0) - break; - git_SHA1_Update(&ctx, buffer, this_sz); - } - git_SHA1_Final(sha1, &ctx); - - if (binary) - fwrite(sha1, 1, 20, stdout); - else - puts(sha1_to_hex(sha1)); - exit(0); + return cmd_hash_impl(ac, av, GIT_HASH_SHA1); } diff --git a/t/helper/test-sha256.c b/t/helper/test-sha256.c new file mode 100644 index 0000000..0ac6a99 --- /dev/null +++ b/t/helper/test-sha256.c @@ -0,0 +1,7 @@ +#include "test-tool.h" +#include "cache.h" + +int cmd__sha256(int ac, const char **av) +{ + return cmd_hash_impl(ac, av, GIT_HASH_SHA256); +} diff --git a/t/helper/test-sigchain.c b/t/helper/test-sigchain.c index 77ac5bc..d013bcc 100644 --- a/t/helper/test-sigchain.c +++ b/t/helper/test-sigchain.c @@ -14,7 +14,8 @@ X(two) X(three) #undef X -int cmd__sigchain(int argc, const char **argv) { +int cmd__sigchain(int argc, const char **argv) +{ sigchain_push(SIGTERM, one); sigchain_push(SIGTERM, two); sigchain_push(SIGTERM, three); diff --git a/t/helper/test-submodule-nested-repo-config.c b/t/helper/test-submodule-nested-repo-config.c index a31e2a9..bc97929 100644 --- a/t/helper/test-submodule-nested-repo-config.c +++ b/t/helper/test-submodule-nested-repo-config.c @@ -10,19 +10,21 @@ static void die_usage(int argc, const char **argv, const char *msg) int cmd__submodule_nested_repo_config(int argc, const char **argv) { - struct repository submodule; + struct repository subrepo; + const struct submodule *sub; if (argc < 3) die_usage(argc, argv, "Wrong number of arguments."); setup_git_directory(); - if (repo_submodule_init(&submodule, the_repository, argv[1])) { + sub = submodule_from_path(the_repository, &null_oid, argv[1]); + if (repo_submodule_init(&subrepo, the_repository, sub)) { die_usage(argc, argv, "Submodule not found."); } /* Read the config of _child_ submodules. */ - print_config_from_gitmodules(&submodule, argv[2]); + print_config_from_gitmodules(&subrepo, argv[2]); submodule_free(the_repository); diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index bfb195b..50c55f8 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -20,6 +20,7 @@ static struct test_cmd cmds[] = { { "example-decorate", cmd__example_decorate }, { "genrandom", cmd__genrandom }, { "hashmap", cmd__hashmap }, + { "hash-speed", cmd__hash_speed }, { "index-version", cmd__index_version }, { "json-writer", cmd__json_writer }, { "lazy-init-name-hash", cmd__lazy_init_name_hash }, @@ -42,6 +43,7 @@ static struct test_cmd cmds[] = { { "scrap-cache-tree", cmd__scrap_cache_tree }, { "sha1", cmd__sha1 }, { "sha1-array", cmd__sha1_array }, + { "sha256", cmd__sha256 }, { "sigchain", cmd__sigchain }, { "strcmp-offset", cmd__strcmp_offset }, { "string-list", cmd__string_list }, @@ -49,6 +51,7 @@ static struct test_cmd cmds[] = { { "submodule-nested-repo-config", cmd__submodule_nested_repo_config }, { "subprocess", cmd__subprocess }, { "urlmatch-normalization", cmd__urlmatch_normalization }, + { "xml-encode", cmd__xml_encode }, { "wildmatch", cmd__wildmatch }, #ifdef GIT_WINDOWS_NATIVE { "windows-named-pipe", cmd__windows_named_pipe }, diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index 042f124..a563df4 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -1,6 +1,7 @@ #ifndef TEST_TOOL_H #define TEST_TOOL_H +#define USE_THE_INDEX_COMPATIBILITY_MACROS #include "git-compat-util.h" int cmd__chmtime(int argc, const char **argv); @@ -16,6 +17,7 @@ int cmd__dump_untracked_cache(int argc, const char **argv); int cmd__example_decorate(int argc, const char **argv); int cmd__genrandom(int argc, const char **argv); int cmd__hashmap(int argc, const char **argv); +int cmd__hash_speed(int argc, const char **argv); int cmd__index_version(int argc, const char **argv); int cmd__json_writer(int argc, const char **argv); int cmd__lazy_init_name_hash(int argc, const char **argv); @@ -38,6 +40,7 @@ int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); int cmd__sha1_array(int argc, const char **argv); +int cmd__sha256(int argc, const char **argv); int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); int cmd__string_list(int argc, const char **argv); @@ -45,10 +48,13 @@ int cmd__submodule_config(int argc, const char **argv); int cmd__submodule_nested_repo_config(int argc, const char **argv); int cmd__subprocess(int argc, const char **argv); int cmd__urlmatch_normalization(int argc, const char **argv); +int cmd__xml_encode(int argc, const char **argv); int cmd__wildmatch(int argc, const char **argv); #ifdef GIT_WINDOWS_NATIVE int cmd__windows_named_pipe(int argc, const char **argv); #endif int cmd__write_cache(int argc, const char **argv); +int cmd_hash_impl(int ac, const char **av, int algo); + #endif diff --git a/t/helper/test-xml-encode.c b/t/helper/test-xml-encode.c new file mode 100644 index 0000000..a648bbd --- /dev/null +++ b/t/helper/test-xml-encode.c @@ -0,0 +1,80 @@ +#include "test-tool.h" + +static const char *utf8_replace_character = "�"; + +/* + * Encodes (possibly incorrect) UTF-8 on <stdin> to <stdout>, to be embedded + * in an XML file. + */ +int cmd__xml_encode(int argc, const char **argv) +{ + unsigned char buf[1024], tmp[4], *tmp2 = NULL; + ssize_t cur = 0, len = 1, remaining = 0; + unsigned char ch; + + for (;;) { + if (++cur == len) { + len = xread(0, buf, sizeof(buf)); + if (!len) + return 0; + if (len < 0) + die_errno("Could not read <stdin>"); + cur = 0; + } + ch = buf[cur]; + + if (tmp2) { + if ((ch & 0xc0) != 0x80) { + fputs(utf8_replace_character, stdout); + tmp2 = NULL; + cur--; + continue; + } + *tmp2 = ch; + tmp2++; + if (--remaining == 0) { + fwrite(tmp, tmp2 - tmp, 1, stdout); + tmp2 = NULL; + } + continue; + } + + if (!(ch & 0x80)) { + /* 0xxxxxxx */ + if (ch == '&') + fputs("&", stdout); + else if (ch == '\'') + fputs("'", stdout); + else if (ch == '"') + fputs(""", stdout); + else if (ch == '<') + fputs("<", stdout); + else if (ch == '>') + fputs(">", stdout); + else if (ch >= 0x20) + fputc(ch, stdout); + else if (ch == 0x09 || ch == 0x0a || ch == 0x0d) + fprintf(stdout, "&#x%02x;", ch); + else + fputs(utf8_replace_character, stdout); + } else if ((ch & 0xe0) == 0xc0) { + /* 110XXXXx 10xxxxxx */ + tmp[0] = ch; + remaining = 1; + tmp2 = tmp + 1; + } else if ((ch & 0xf0) == 0xe0) { + /* 1110XXXX 10Xxxxxx 10xxxxxx */ + tmp[0] = ch; + remaining = 2; + tmp2 = tmp + 1; + } else if ((ch & 0xf8) == 0xf0) { + /* 11110XXX 10XXxxxx 10xxxxxx 10xxxxxx */ + tmp[0] = ch; + remaining = 3; + tmp2 = tmp + 1; + } else + fputs(utf8_replace_character, stdout); + } + + return 0; +} diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index f98de95..79db3b7 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -28,7 +28,7 @@ then test_skip_or_die $GIT_TEST_GIT_DAEMON "file system does not support FIFOs" fi -LIB_GIT_DAEMON_PORT=${LIB_GIT_DAEMON_PORT-${this_test#t}} +test_set_port LIB_GIT_DAEMON_PORT GIT_DAEMON_PID= GIT_DAEMON_DOCUMENT_ROOT_PATH="$PWD"/repo @@ -54,19 +54,11 @@ start_git_daemon() { "$@" "$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ >&3 2>git_daemon_output & GIT_DAEMON_PID=$! - >daemon.log { read -r line <&7 - printf "%s\n" "$line" - printf >&4 "%s\n" "$line" - ( - while read -r line <&7 - do - printf "%s\n" "$line" - printf >&4 "%s\n" "$line" - done - ) & - } 7<git_daemon_output >>"$TRASH_DIRECTORY/daemon.log" && + printf "%s\n" "$line" >&4 + cat <&7 >&4 & + } 7<git_daemon_output && # Check expected output if test x"$(expr "$line" : "\[[0-9]*\] \(.*\)")" != x"Ready to rumble" diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index c275994..b3be3ba 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -53,14 +53,7 @@ time_in_seconds () { (cd / && "$PYTHON_PATH" -c 'import time; print(int(time.time()))') } -# Try to pick a unique port: guess a large number, then hope -# no more than one of each test is running. -# -# This does not handle the case where somebody else is running the -# same tests and has chosen the same ports. -testid=${this_test#t} -git_p4_test_start=9800 -P4DPORT=$((10669 + ($testid - $git_p4_test_start))) +test_set_port P4DPORT P4PORT=localhost:$P4DPORT P4CLIENT=client diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index a8130f9..f3b478c 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -13,6 +13,7 @@ fi GIT_DIR=$PWD/.git GIT_SVN_DIR=$GIT_DIR/svn/refs/remotes/git-svn SVN_TREE=$GIT_SVN_DIR/svn-tree +test_set_port SVNSERVE_PORT svn >/dev/null 2>&1 if test $? -ne 1 @@ -119,7 +120,6 @@ require_svnserve () { } start_svnserve () { - SVNSERVE_PORT=${SVNSERVE_PORT-${this_test#t}} svnserve --listen-port $SVNSERVE_PORT \ --root "$rawsvnrepo" \ --listen-once \ diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index a8729f8..e465116 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -82,7 +82,7 @@ case $(uname) in esac LIB_HTTPD_PATH=${LIB_HTTPD_PATH-"$DEFAULT_HTTPD_PATH"} -LIB_HTTPD_PORT=${LIB_HTTPD_PORT-${this_test#t}} +test_set_port LIB_HTTPD_PORT TEST_PATH="$TEST_DIRECTORY"/lib-httpd HTTPD_ROOT_PATH="$PWD"/httpd diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 581c010..5d63ed9 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -78,6 +78,7 @@ PassEnv GNUPGHOME PassEnv ASAN_OPTIONS PassEnv GIT_TRACE PassEnv GIT_CONFIG_NOSYSTEM +PassEnv GIT_TEST_SIDEBAND_ALL SetEnvIf Git-Protocol ".*" GIT_PROTOCOL=$0 @@ -115,6 +116,7 @@ Alias /auth/dumb/ www/auth/dumb/ SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> +ScriptAliasMatch /error_git_upload_pack/(.*)/git-upload-pack error.sh/ ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ ScriptAlias /error/ error.sh/ diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 0163917..5b56b23 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -235,7 +235,7 @@ reset_work_tree_to_interested () { then mkdir -p submodule_update/.git/modules/sub1/modules && cp -r submodule_update_repo/.git/modules/sub1/modules/sub2 submodule_update/.git/modules/sub1/modules/sub2 - GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1/modules/sub2 config --unset core.worktree + # core.worktree is unset for sub2 as it is not checked out fi && # indicate we are interested in the submodule: git -C submodule_update config submodule.sub1.url "bogus" && @@ -709,7 +709,8 @@ test_submodule_recursing_with_args_common() { git branch -t remove_sub1 origin/remove_sub1 && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - ! test -e sub1 + ! test -e sub1 && + test_must_fail git config -f .git/modules/sub1/config core.worktree ) ' # ... absorbing a .git directory along the way. diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 22499bc..71e63d8 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -322,4 +322,24 @@ test_expect_success 'bare repository: test info/attributes' ' ) ' +test_expect_success 'binary macro expanded by -a' ' + echo "file binary" >.gitattributes && + cat >expect <<-\EOF && + file: binary: set + file: diff: unset + file: merge: unset + file: text: unset + EOF + git check-attr -a file >actual && + test_cmp expect actual +' + + +test_expect_success 'query binary macro directly' ' + echo "file binary" >.gitattributes && + echo file: binary: set >expect && + git check-attr binary file >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0006-date.sh b/t/t0006-date.sh index ffb2975..d9fcc82 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -4,10 +4,10 @@ test_description='test date parsing and printing' . ./test-lib.sh # arbitrary reference time: 2009-08-30 19:20:00 -TEST_DATE_NOW=1251660000; export TEST_DATE_NOW +GIT_TEST_DATE_NOW=1251660000; export GIT_TEST_DATE_NOW check_relative() { - t=$(($TEST_DATE_NOW - $1)) + t=$(($GIT_TEST_DATE_NOW - $1)) echo "$t -> $2" >expect test_expect_${3:-success} "relative date ($2)" " test-tool date relative $t >actual && @@ -128,4 +128,22 @@ check_approxidate '6AM, June 7, 2009' '2009-06-07 06:00:00' check_approxidate '2008-12-01' '2008-12-01 19:20:00' check_approxidate '2009-12-01' '2009-12-01 19:20:00' +check_date_format_human() { + t=$(($GIT_TEST_DATE_NOW - $1)) + echo "$t -> $2" >expect + test_expect_success "human date $t" ' + test-tool date human $t >actual && + test_i18ncmp expect actual +' +} + +check_date_format_human 18000 "5 hours ago" # 5 hours ago +check_date_format_human 432000 "Tue Aug 25 19:20" # 5 days ago +check_date_format_human 1728000 "Mon Aug 10 19:20" # 3 weeks ago +check_date_format_human 13000000 "Thu Apr 2 08:13" # 5 months ago +check_date_format_human 31449600 "Aug 31 2008" # 12 months ago +check_date_format_human 37500000 "Jun 22 2008" # 1 year, 2 months ago +check_date_format_human 55188000 "Dec 1 2007" # 1 year, 9 months ago +check_date_format_human 630000000 "Sep 13 1989" # 20 years ago + test_done diff --git a/t/t0015-hash.sh b/t/t0015-hash.sh new file mode 100755 index 0000000..291e906 --- /dev/null +++ b/t/t0015-hash.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='test basic hash implementation' +. ./test-lib.sh + + +test_expect_success 'test basic SHA-1 hash values' ' + test-tool sha1 </dev/null >actual && + grep da39a3ee5e6b4b0d3255bfef95601890afd80709 actual && + printf "a" | test-tool sha1 >actual && + grep 86f7e437faa5a7fce15d1ddcb9eaeaea377667b8 actual && + printf "abc" | test-tool sha1 >actual && + grep a9993e364706816aba3e25717850c26c9cd0d89d actual && + printf "message digest" | test-tool sha1 >actual && + grep c12252ceda8be8994d5fa0290a47231c1d16aae3 actual && + printf "abcdefghijklmnopqrstuvwxyz" | test-tool sha1 >actual && + grep 32d10c7b8cf96570ca04ce37f2a19d84240d3a89 actual && + perl -e "$| = 1; print q{aaaaaaaaaa} for 1..100000;" | \ + test-tool sha1 >actual && + grep 34aa973cd4c4daa4f61eeb2bdbad27316534016f actual && + printf "blob 0\0" | test-tool sha1 >actual && + grep e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 actual && + printf "blob 3\0abc" | test-tool sha1 >actual && + grep f2ba8f84ab5c1bce84a7b441cb1959cfc7093b7f actual && + printf "tree 0\0" | test-tool sha1 >actual && + grep 4b825dc642cb6eb9a060e54bf8d69288fbee4904 actual +' + +test_expect_success 'test basic SHA-256 hash values' ' + test-tool sha256 </dev/null >actual && + grep e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 actual && + printf "a" | test-tool sha256 >actual && + grep ca978112ca1bbdcafac231b39a23dc4da786eff8147c4e72b9807785afee48bb actual && + printf "abc" | test-tool sha256 >actual && + grep ba7816bf8f01cfea414140de5dae2223b00361a396177a9cb410ff61f20015ad actual && + printf "message digest" | test-tool sha256 >actual && + grep f7846f55cf23e14eebeab5b4e1550cad5b509e3348fbc4efa3a1413d393cb650 actual && + printf "abcdefghijklmnopqrstuvwxyz" | test-tool sha256 >actual && + grep 71c480df93d6ae2f1efad1447c66c9525e316218cf51fc8d9ed832f2daf18b73 actual && + # Try to exercise the chunking code by turning autoflush on. + perl -e "$| = 1; print q{aaaaaaaaaa} for 1..100000;" | \ + test-tool sha256 >actual && + grep cdc76e5c9914fb9281a1c7e284d73e67f1809a48a497200e046d39ccc7112cd0 actual && + perl -e "$| = 1; print q{abcdefghijklmnopqrstuvwxyz} for 1..100000;" | \ + test-tool sha256 >actual && + grep e406ba321ca712ad35a698bf0af8d61fc4dc40eca6bdcea4697962724ccbde35 actual && + printf "blob 0\0" | test-tool sha256 >actual && + grep 473a0f4c3be8a93681a267e3b1e9a7dcda1185436fe141f7749120a303721813 actual && + printf "blob 3\0abc" | test-tool sha256 >actual && + grep c1cf6e465077930e88dc5136641d402f72a229ddd996f627d60e9639eaba35a6 actual && + printf "tree 0\0" | test-tool sha256 >actual && + grep 6ef19b41225c5369f1c104d45d8d85efa9b057b53b14b4b9b939dd74decc5321 actual +' + +test_done diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index fd5f1ac..e10f5f7 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -24,7 +24,7 @@ generate_random_characters () { } file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } filter_git () { diff --git a/t/t0025-crlf-renormalize.sh b/t/t0025-crlf-renormalize.sh index 9d9e02a..e13363a 100755 --- a/t/t0025-crlf-renormalize.sh +++ b/t/t0025-crlf-renormalize.sh @@ -27,4 +27,13 @@ test_expect_success 'renormalize CRLF in repo' ' test_cmp expect actual ' +test_expect_success 'ignore-errors not mistaken for renormalize' ' + git reset --hard && + echo "*.txt text=auto" >.gitattributes && + git ls-files --eol >expect && + git add --ignore-errors "*.txt" && + git ls-files --eol >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index beb5927..3587e45 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -293,9 +293,9 @@ checkout_files () { do rm crlf_false_attr__$f.txt && if test -z "$ceol"; then - git checkout crlf_false_attr__$f.txt + git checkout -- crlf_false_attr__$f.txt else - git -c core.eol=$ceol checkout crlf_false_attr__$f.txt + git -c core.eol=$ceol checkout -- crlf_false_attr__$f.txt fi done diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh index 7e87b5a..e58ecbf 100755 --- a/t/t0028-working-tree-encoding.sh +++ b/t/t0028-working-tree-encoding.sh @@ -11,9 +11,12 @@ test_expect_success 'setup test files' ' text="hallo there!\ncan you read me?" && echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && + echo "*.utf16lebom text working-tree-encoding=UTF-16LE-BOM" >>.gitattributes && printf "$text" >test.utf8.raw && printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + printf "\377\376" >test.utf16lebom.raw && + printf "$text" | iconv -f UTF-8 -t UTF-32LE >>test.utf16lebom.raw && # Line ending tests printf "one\ntwo\nthree\n" >lf.utf8.raw && @@ -32,7 +35,8 @@ test_expect_success 'setup test files' ' # Add only UTF-16 file, we will add the UTF-32 file later cp test.utf16.raw test.utf16 && cp test.utf32.raw test.utf32 && - git add .gitattributes test.utf16 && + cp test.utf16lebom.raw test.utf16lebom && + git add .gitattributes test.utf16 test.utf16lebom && git commit -m initial ' @@ -51,6 +55,12 @@ test_expect_success 're-encode to UTF-16 on checkout' ' test_cmp_bin test.utf16.raw test.utf16 ' +test_expect_success 're-encode to UTF-16-LE-BOM on checkout' ' + rm test.utf16lebom && + git checkout test.utf16lebom && + test_cmp_bin test.utf16lebom.raw test.utf16lebom +' + test_expect_success 'check $GIT_DIR/info/attributes support' ' test_when_finished "rm -f test.utf32.git" && test_when_finished "git reset --hard HEAD" && diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index 5ce47e8..0c24a0f 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -430,9 +430,15 @@ test_expect_success '-c with changed comment char' ' test_expect_success '-c with comment char defined in .git/config' ' test_config core.commentchar = && printf "= foo\n" >expect && - printf "foo" | ( - mkdir sub && cd sub && git stripspace -c - ) >actual && + rm -fr sub && + mkdir sub && + printf "foo" | git -C sub stripspace -c >actual && + test_cmp expect actual +' + +test_expect_success '-c outside git repository' ' + printf "# foo\n" >expect && + printf "foo" | nongit git stripspace -c >actual && test_cmp expect actual ' diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 96bf6d6..ebc4956 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -31,7 +31,15 @@ test_expect_success 'run_command can run a command' ' test_must_be_empty err ' -test_expect_success 'run_command is restricted to PATH' ' + +test_lazy_prereq RUNS_COMMANDS_FROM_PWD ' + write_script runs-commands-from-pwd <<-\EOF && + true + EOF + runs-commands-from-pwd >/dev/null 2>&1 +' + +test_expect_success !RUNS_COMMANDS_FROM_PWD 'run_command is restricted to PATH' ' write_script should-not-run <<-\EOF && echo yikes EOF @@ -158,7 +166,8 @@ test_trace () { expect="$1" shift GIT_TRACE=1 test-tool run-command "$@" run-command true 2>&1 >/dev/null | \ - sed -e 's/.* run_command: //' -e '/trace: .*/d' >actual && + sed -e 's/.* run_command: //' -e '/trace: .*/d' \ + -e '/RUNTIME_PREFIX requested/d' >actual && echo "$expect true" >expect && test_cmp expect actual } @@ -191,4 +200,14 @@ test_expect_success 'GIT_TRACE with environment variables' ' ) ' +test_expect_success MINGW 'verify curlies are quoted properly' ' + : force the rev-parse through the MSYS2 Bash && + git -c alias.r="!git rev-parse" r -- a{b}c >actual && + cat >expect <<-\EOF && + -- + a{b}c + EOF + test_cmp expect actual +' + test_done diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index ba3887f..bce0278 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -349,7 +349,7 @@ test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob grep $(git -C repo rev-parse bar) out # sanity check that some walking was done ' -test_expect_success 'rev-list accepts missing and promised objects on command line' ' +test_expect_success 'rev-list dies for missing objects on cmd line' ' rm -rf repo && test_create_repo repo && test_commit -C repo foo && @@ -366,7 +366,19 @@ test_expect_success 'rev-list accepts missing and promised objects on command li git -C repo config core.repositoryformatversion 1 && git -C repo config extensions.partialclone "arbitrary string" && - git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" + + for OBJ in "$COMMIT" "$TREE" "$BLOB"; do + test_must_fail git -C repo rev-list --objects \ + --exclude-promisor-objects "$OBJ" && + test_must_fail git -C repo rev-list --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" && + + # Do not die or crash when --ignore-missing is passed. + git -C repo rev-list --ignore-missing --objects \ + --exclude-promisor-objects "$OBJ" && + git -C repo rev-list --ignore-missing --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" + done ' test_expect_success 'gc repacks promisor objects separately from non-promisor objects' ' @@ -480,7 +492,6 @@ test_expect_success 'gc stops traversal when a missing but promised object is re ! grep "$TREE_HASH" out ' -LIB_HTTPD_PORT=12345 # default port, 410, cannot be used as non-root . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 1a9b21b..dcb4dbb 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -8,7 +8,7 @@ test_description='adding and checking out large blobs' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } test_expect_success setup ' diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index e4d5b56..c19fb50 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -388,4 +388,14 @@ test_expect_success C_LOCALE_OUTPUT 'ambiguous commits are printed by type first done ' +test_expect_success 'cat-file --batch and --batch-check show ambiguous' ' + echo "0000 ambiguous" >expect && + echo 0000 | git cat-file --batch-check >actual 2>err && + test_cmp expect actual && + test_i18ngrep hint: err && + echo 0000 | git cat-file --batch >actual 2>err && + test_cmp expect actual && + test_i18ngrep hint: err +' + test_done diff --git a/t/t2018-checkout-branch.sh b/t/t2018-checkout-branch.sh index 2131fb2..c5014ad 100755 --- a/t/t2018-checkout-branch.sh +++ b/t/t2018-checkout-branch.sh @@ -198,4 +198,13 @@ test_expect_success 'checkout -B to the current branch works' ' test_dirty_mergeable ' +test_expect_success 'checkout -b after clone --no-checkout does a checkout of HEAD' ' + git init src && + test_commit -C src a && + rev="$(git -C src rev-parse HEAD)" && + git clone --no-checkout src dest && + git -C dest checkout "$rev" -b branch && + test_path_is_file dest/a.t +' + test_done diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh index 33c0337..939d18d 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2028-worktree-move.sh @@ -112,6 +112,26 @@ test_expect_success 'move locked worktree (force)' ' git worktree move --force --force flump ploof ' +test_expect_success 'move a repo with uninitialized submodule' ' + git init withsub && + ( + cd withsub && + test_commit initial && + git submodule add "$PWD"/.git sub && + git commit -m withsub && + git worktree add second HEAD && + git worktree move second third + ) +' + +test_expect_success 'not move a repo with initialized submodule' ' + ( + cd withsub && + git -C third submodule update && + test_must_fail git worktree move third forth + ) +' + test_expect_success 'remove main worktree' ' test_must_fail git worktree remove . ' @@ -185,4 +205,21 @@ test_expect_success 'remove cleans up .git/worktrees when empty' ' ) ' +test_expect_success 'remove a repo with uninitialized submodule' ' + ( + cd withsub && + git worktree add to-remove HEAD && + git worktree remove to-remove + ) +' + +test_expect_success 'not remove a repo with initialized submodule' ' + ( + cd withsub && + git worktree add to-remove HEAD && + git -C to-remove submodule update && + test_must_fail git worktree remove to-remove + ) +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 7a440e0..52fa41c 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -147,6 +147,25 @@ test_expect_success 'rebase -i with the exec command checks tree cleanness' ' git rebase --continue ' +test_expect_success 'rebase -x with empty command fails' ' + test_when_finished "git rebase --abort ||:" && + test_must_fail git rebase -x "" @ 2>actual && + test_write_lines "error: empty exec command" >expected && + test_i18ncmp expected actual && + test_must_fail git rebase -x " " @ 2>actual && + test_i18ncmp expected actual +' + +LF=' +' +test_expect_success 'rebase -x with newline in command fails' ' + test_when_finished "git rebase --abort ||:" && + test_must_fail git rebase -x "a${LF}b" @ 2>actual && + test_write_lines "error: exec commands cannot contain newlines" \ + >expected && + test_i18ncmp expected actual +' + test_expect_success 'rebase -i with exec of inexistent command' ' git checkout master && test_when_finished "git rebase --abort" && @@ -156,6 +175,11 @@ test_expect_success 'rebase -i with exec of inexistent command' ' ! grep "Maybe git-rebase is broken" actual ' +test_expect_success 'implicit interactive rebase does not invoke sequence editor' ' + test_when_finished "git rebase --abort ||:" && + GIT_SEQUENCE_EDITOR="echo bad >" git rebase -x"echo one" @^ +' + test_expect_success 'no changes are a nop' ' git checkout branch2 && set_fake_editor && diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index f64b130..b393e1e 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -17,14 +17,9 @@ test_expect_success 'setup' ' git tag start ' -cat >expect <<\EOF -Already applied: 0001 A -Already applied: 0002 B -Committed: 0003 Z -EOF - test_expect_success 'rebase -m' ' git rebase -m master >report && + >expect && sed -n -e "/^Already applied: /p" \ -e "/^Committed: /p" report >actual && test_cmp expect actual diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 0210b2a..25aaaca 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -254,4 +254,18 @@ test_expect_success 'the todo command "break" works' ' test_path_is_file execed ' +test_expect_success '--reschedule-failed-exec' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -x false --reschedule-failed-exec HEAD^ && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + git rebase --abort && + test_must_fail git -c rebase.rescheduleFailedExec=true \ + rebase -x false HEAD^ 2>err && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + test_i18ngrep "has been rescheduled" err && + git rebase --abort && + test_must_fail git rebase -y false HEAD^ 2>err && + test_i18ngrep "has been rescheduled" err +' + test_done diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index 4c7494c..2d1094e 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -53,41 +53,6 @@ create_expected_success_interactive () { EOF } -create_expected_success_merge () { - cat >expected <<-EOF - $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - First, rewinding head to replay your work on top of it... - Merging unrelated-onto-branch with HEAD~1 - Merging: - $(git rev-parse --short unrelated-onto-branch) unrelated commit - $(git rev-parse --short feature-branch^) second commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~2) initial commit - [detached HEAD $(git rev-parse --short rebased-feature-branch~1)] second commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:14:13 2005 -0700 - 2 files changed, 2 insertions(+) - create mode 100644 file1 - create mode 100644 file2 - Committed: 0001 second commit - Merging unrelated-onto-branch with HEAD~0 - Merging: - $(git rev-parse --short rebased-feature-branch~1) second commit - $(git rev-parse --short feature-branch) third commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~1) second commit - [detached HEAD $(git rev-parse --short rebased-feature-branch)] third commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:15:13 2005 -0700 - 1 file changed, 1 insertion(+) - create mode 100644 file3 - Committed: 0002 third commit - All done. - Applied autostash. - EOF -} - create_expected_failure_am () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) @@ -112,43 +77,6 @@ create_expected_failure_interactive () { EOF } -create_expected_failure_merge () { - cat >expected <<-EOF - $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - First, rewinding head to replay your work on top of it... - Merging unrelated-onto-branch with HEAD~1 - Merging: - $(git rev-parse --short unrelated-onto-branch) unrelated commit - $(git rev-parse --short feature-branch^) second commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~2) initial commit - [detached HEAD $(git rev-parse --short rebased-feature-branch~1)] second commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:14:13 2005 -0700 - 2 files changed, 2 insertions(+) - create mode 100644 file1 - create mode 100644 file2 - Committed: 0001 second commit - Merging unrelated-onto-branch with HEAD~0 - Merging: - $(git rev-parse --short rebased-feature-branch~1) second commit - $(git rev-parse --short feature-branch) third commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~1) second commit - [detached HEAD $(git rev-parse --short rebased-feature-branch)] third commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:15:13 2005 -0700 - 1 file changed, 1 insertion(+) - create mode 100644 file3 - Committed: 0002 third commit - All done. - Applying autostash resulted in conflicts. - Your changes are safe in the stash. - You can run "git stash pop" or "git stash drop" at any time. - EOF -} - testrebase () { type=$1 dotest=$2 @@ -177,6 +105,9 @@ testrebase () { test_expect_success "rebase$type --autostash: check output" ' test_when_finished git branch -D rebased-feature-branch && suffix=${type#\ --} && suffix=${suffix:-am} && + if test ${suffix} = "merge"; then + suffix=interactive + fi && create_expected_success_$suffix && test_i18ncmp expected actual ' @@ -274,6 +205,9 @@ testrebase () { test_expect_success "rebase$type: check output with conflicting stash" ' test_when_finished git branch -D rebased-feature-branch && suffix=${type#\ --} && suffix=${suffix:-am} && + if test ${suffix} = "merge"; then + suffix=interactive + fi && create_expected_failure_$suffix && test_i18ncmp expected actual ' diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 23ad4cf..7274dca 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -111,7 +111,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -126,7 +126,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -141,7 +141,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -284,7 +284,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -315,7 +315,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index 5f892e3..fd8efe8 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -70,9 +70,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" d.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'e n o' '' -test_run_rebase success 'e n o' -m +test_run_rebase success 'n o e' '' +test_run_rebase success 'n o e' -m test_run_rebase success 'n o e' -i test_run_rebase () { @@ -87,9 +86,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'd e n o' '' -test_run_rebase success 'd e n o' -m +test_run_rebase success 'd n o e' '' +test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i test_run_rebase () { @@ -104,9 +102,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'd e n o' '' -test_run_rebase success 'd e n o' -m +test_run_rebase success 'd n o e' '' +test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i if ! test_have_prereq REBASE_P; then diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index cc56468..4c69255 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -125,7 +125,7 @@ test_expect_success '`reset` refuses to overwrite untracked files' ' : >dont-overwrite-untracked.t && echo "reset refs/tags/dont-overwrite-untracked" >script-from-scratch && test_config sequence.editor \""$PWD"/replace-editor.sh\" && - test_must_fail git rebase -r HEAD && + test_must_fail git rebase -ir HEAD && git rebase --abort ' diff --git a/t/t3502-cherry-pick-merge.sh b/t/t3502-cherry-pick-merge.sh index b160271..8b635a1 100755 --- a/t/t3502-cherry-pick-merge.sh +++ b/t/t3502-cherry-pick-merge.sh @@ -40,12 +40,12 @@ test_expect_success 'cherry-pick -m complains of bogus numbers' ' test_expect_code 129 git cherry-pick -m 0 b ' -test_expect_success 'cherry-pick a non-merge with -m should fail' ' +test_expect_success 'cherry-pick explicit first parent of a non-merge' ' git reset --hard && git checkout a^0 && - test_expect_code 128 git cherry-pick -m 1 b && - git diff --exit-code a -- + git cherry-pick -m 1 b && + git diff --exit-code c -- ' @@ -84,12 +84,12 @@ test_expect_success 'cherry pick a merge relative to nonexistent parent should f ' -test_expect_success 'revert a non-merge with -m should fail' ' +test_expect_success 'revert explicit first parent of a non-merge' ' git reset --hard && git checkout c^0 && - test_must_fail git revert -m 1 b && - git diff --exit-code c + git revert -m 1 b && + git diff --exit-code a -- ' diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh index fb889ac..127dd00 100755 --- a/t/t3506-cherry-pick-ff.sh +++ b/t/t3506-cherry-pick-ff.sh @@ -64,10 +64,10 @@ test_expect_success 'merge setup' ' git checkout -b new A ' -test_expect_success 'cherry-pick a non-merge with --ff and -m should fail' ' +test_expect_success 'cherry-pick explicit first parent of a non-merge with --ff' ' git reset --hard A -- && - test_must_fail git cherry-pick --ff -m 1 B && - git diff --exit-code A -- + git cherry-pick --ff -m 1 B && + git diff --exit-code C -- ' test_expect_success 'cherry pick a merge with --ff but without -m should fail' ' diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index c84eeef..941d502 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -61,7 +61,11 @@ test_expect_success 'cherry-pick mid-cherry-pick-sequence' ' test_expect_success 'cherry-pick persists opts correctly' ' pristine_detach initial && - test_expect_code 128 git cherry-pick -s -m 1 --strategy=recursive -X patience -X ours initial..anotherpick && + # to make sure that the session to cherry-pick a sequence + # gets interrupted, use a high-enough number that is larger + # than the number of parents of any commit we have created + mainline=4 && + test_expect_code 128 git cherry-pick -s -m $mainline --strategy=recursive -X patience -X ours initial..anotherpick && test_path_is_dir .git/sequencer && test_path_is_file .git/sequencer/head && test_path_is_file .git/sequencer/todo && @@ -69,7 +73,7 @@ test_expect_success 'cherry-pick persists opts correctly' ' echo "true" >expect && git config --file=.git/sequencer/opts --get-all options.signoff >actual && test_cmp expect actual && - echo "1" >expect && + echo "$mainline" >expect && git config --file=.git/sequencer/opts --get-all options.mainline >actual && test_cmp expect actual && echo "recursive" >expect && diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 37729ba..be582a5 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -402,4 +402,11 @@ test_expect_success 'all statuses changed in folder if . is given' ' test $(git ls-files --stage | grep ^100755 | wc -l) -eq 0 ' +test_expect_success CASE_INSENSITIVE_FS 'path is case-insensitive' ' + path="$(pwd)/BLUB" && + touch "$path" && + downcased="$(echo "$path" | tr A-Z a-z)" && + git add "$downcased" +' + test_done diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index a8e01ec..03489af 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -32,28 +32,37 @@ test_expect_success 'prepare binary file' ' git commit -m binbin ' -# test_expect_success '--stat output after text chmod' ' -# test_chmod -x rezrov && -# echo " 0 files changed" >expect && -# git diff HEAD --stat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--shortstat output after text chmod' ' -# git diff HEAD --shortstat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--stat output after binary chmod' ' -# test_chmod +x binbin && -# echo " 0 files changed" >expect && -# git diff HEAD --stat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--shortstat output after binary chmod' ' -# git diff HEAD --shortstat >actual && -# test_i18ncmp expect actual -# ' +test_expect_success '--stat output after text chmod' ' + test_chmod -x rezrov && + cat >expect <<-\EOF && + rezrov | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + git diff HEAD --stat >actual && + test_i18ncmp expect actual +' + +test_expect_success '--shortstat output after text chmod' ' + tail -n 1 <expect >expect.short && + git diff HEAD --shortstat >actual && + test_i18ncmp expect.short actual +' + +test_expect_success '--stat output after binary chmod' ' + test_chmod +x binbin && + cat >expect <<-EOF && + binbin | Bin + rezrov | 0 + 2 files changed, 0 insertions(+), 0 deletions(-) + EOF + git diff HEAD --stat >actual && + test_i18ncmp expect actual +' + +test_expect_success '--shortstat output after binary chmod' ' + tail -n 1 <expect >expect.short && + git diff HEAD --shortstat >actual && + test_i18ncmp expect.short actual +' test_done diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 7d985ff..9f8f0e8 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -98,6 +98,12 @@ test_expect_success setup ' git commit -m "update mode" && git checkout -f master && + # Same merge as master, but with parents reversed. Hide it in a + # pseudo-ref to avoid impacting tests with --all. + commit=$(echo reverse | + git commit-tree -p master^2 -p master^1 master^{tree}) && + git update-ref REVERSE $commit && + git config diff.renames false && git show-branch @@ -239,6 +245,8 @@ diff-tree --cc --stat --summary master # stat summary should show the diffstat and summary with the first parent diff-tree -c --stat --summary side diff-tree --cc --stat --summary side +diff-tree --cc --shortstat master +diff-tree --cc --summary REVERSE # improved by Timo's patch diff-tree --cc --patch-with-stat master # improved by Timo's patch @@ -350,6 +358,7 @@ diff --line-prefix=abc master master^ side diff --dirstat master~1 master~2 diff --dirstat initial rearrange diff --dirstat-by-file initial rearrange +diff --dirstat --cc master~1 master # No-index --abbrev and --no-abbrev diff --raw initial :noellipses diff --raw initial diff --git a/t/t4013/diff.diff-tree_--cc_--shortstat_master b/t/t4013/diff.diff-tree_--cc_--shortstat_master new file mode 100644 index 0000000..a4ca42d --- /dev/null +++ b/t/t4013/diff.diff-tree_--cc_--shortstat_master @@ -0,0 +1,4 @@ +$ git diff-tree --cc --shortstat master +59d314ad6f356dd08601a4cd5e530381da3e3c64 + 2 files changed, 5 insertions(+) +$ diff --git a/t/t4013/diff.diff-tree_--cc_--summary_REVERSE b/t/t4013/diff.diff-tree_--cc_--summary_REVERSE new file mode 100644 index 0000000..e208dd5 --- /dev/null +++ b/t/t4013/diff.diff-tree_--cc_--summary_REVERSE @@ -0,0 +1,6 @@ +$ git diff-tree --cc --summary REVERSE +2562325a7ee916efb2481da93073b82cec801cbc + create mode 100644 file1 + delete mode 100644 file2 + delete mode 100644 file3 +$ diff --git a/t/t4013/diff.diff_--dirstat_--cc_master~1_master b/t/t4013/diff.diff_--dirstat_--cc_master~1_master new file mode 100644 index 0000000..fba4e34 --- /dev/null +++ b/t/t4013/diff.diff_--dirstat_--cc_master~1_master @@ -0,0 +1,3 @@ +$ git diff --dirstat --cc master~1 master + 40.0% dir/ +$ diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index a9fb226..ab4670d 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -1802,8 +1802,8 @@ test_expect_success 'only move detection ignores white spaces' ' <BOLD;MAGENTA>-a long line to exceed per-line minimum<RESET> <BOLD;MAGENTA>-another long line to exceed per-line minimum<RESET> <RED>-original file<RESET> - <BOLD;YELLOW>+<RESET>Q<BOLD;YELLOW>a long line to exceed per-line minimum<RESET> - <BOLD;YELLOW>+<RESET>Q<BOLD;YELLOW>another long line to exceed per-line minimum<RESET> + <BOLD;CYAN>+<RESET>Q<BOLD;CYAN>a long line to exceed per-line minimum<RESET> + <BOLD;CYAN>+<RESET>Q<BOLD;CYAN>another long line to exceed per-line minimum<RESET> <GREEN>+<RESET><GREEN>new file<RESET> EOF test_cmp expected actual @@ -1827,6 +1827,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' QQQthat has similar lines QQQto previous blocks, but with different indent QQQYetQAnotherQoutlierQ + QLine with internal w h i t e s p a c e change EOF git add text.txt && @@ -1847,6 +1848,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' QQthat has similar lines QQto previous blocks, but with different indent QQYetQAnotherQoutlier + QLine with internal whitespace change EOF git diff --color --color-moved --color-moved-ws=allow-indentation-change >actual.raw && @@ -1856,7 +1858,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD>diff --git a/text.txt b/text.txt<RESET> <BOLD>--- a/text.txt<RESET> <BOLD>+++ b/text.txt<RESET> - <CYAN>@@ -1,14 +1,14 @@<RESET> + <CYAN>@@ -1,15 +1,15 @@<RESET> <BOLD;MAGENTA>-QIndented<RESET> <BOLD;MAGENTA>-QText across<RESET> <BOLD;MAGENTA>-Qsome lines<RESET> @@ -1871,6 +1873,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD;MAGENTA>-QQQthat has similar lines<RESET> <BOLD;MAGENTA>-QQQto previous blocks, but with different indent<RESET> <RED>-QQQYetQAnotherQoutlierQ<RESET> + <RED>-QLine with internal w h i t e s p a c e change<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>Indented<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>Text across<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>some lines<RESET> @@ -1885,11 +1888,30 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>that has similar lines<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>to previous blocks, but with different indent<RESET> <GREEN>+<RESET>QQ<GREEN>YetQAnotherQoutlier<RESET> + <GREEN>+<RESET>Q<GREEN>Line with internal whitespace change<RESET> EOF test_cmp expected actual ' +test_expect_success 'bogus settings in move detection erroring out' ' + test_must_fail git diff --color-moved=bogus 2>err && + test_i18ngrep "must be one of" err && + test_i18ngrep bogus err && + + test_must_fail git -c diff.colormoved=bogus diff 2>err && + test_i18ngrep "must be one of" err && + test_i18ngrep "from command-line config" err && + + test_must_fail git diff --color-moved-ws=bogus 2>err && + test_i18ngrep "possible values" err && + test_i18ngrep bogus err && + + test_must_fail git -c diff.colormovedws=bogus diff 2>err && + test_i18ngrep "possible values" err && + test_i18ngrep "from command-line config" err +' + test_expect_success 'compare whitespace delta incompatible with other space options' ' test_must_fail git diff \ --color-moved-ws=allow-indentation-change,ignore-all-space \ @@ -1897,4 +1919,93 @@ test_expect_success 'compare whitespace delta incompatible with other space opti test_i18ngrep allow-indentation-change err ' +EMPTY='' +test_expect_success 'compare mixed whitespace delta across moved blocks' ' + + git reset --hard && + tr Q_ "\t " <<-EOF >text.txt && + ${EMPTY} + ____too short without + ${EMPTY} + ___being grouped across blank line + ${EMPTY} + context + lines + to + anchor + ____Indented text to + _Q____be further indented by four spaces across + ____Qseveral lines + QQ____These two lines have had their + ____indentation reduced by four spaces + Qdifferent indentation change + ____too short + EOF + + git add text.txt && + git commit -m "add text.txt" && + + tr Q_ "\t " <<-EOF >text.txt && + context + lines + to + anchor + QIndented text to + QQbe further indented by four spaces across + Q____several lines + ${EMPTY} + QQtoo short without + ${EMPTY} + Q_______being grouped across blank line + ${EMPTY} + Q_QThese two lines have had their + indentation reduced by four spaces + QQdifferent indentation change + __Qtoo short + EOF + + git -c color.diff.whitespace="normal red" \ + -c core.whitespace=space-before-tab \ + diff --color --color-moved --ws-error-highlight=all \ + --color-moved-ws=allow-indentation-change >actual.raw && + grep -v "index" actual.raw | test_decode_color >actual && + + cat <<-\EOF >expected && + <BOLD>diff --git a/text.txt b/text.txt<RESET> + <BOLD>--- a/text.txt<RESET> + <BOLD>+++ b/text.txt<RESET> + <CYAN>@@ -1,16 +1,16 @@<RESET> + <BOLD;MAGENTA>-<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> too short without<RESET> + <BOLD;MAGENTA>-<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> being grouped across blank line<RESET> + <BOLD;MAGENTA>-<RESET> + <RESET>context<RESET> + <RESET>lines<RESET> + <RESET>to<RESET> + <RESET>anchor<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> Indented text to<RESET> + <BOLD;MAGENTA>-<RESET><BRED> <RESET> <BOLD;MAGENTA> be further indented by four spaces across<RESET> + <BOLD;MAGENTA>-<RESET><BRED> <RESET> <BOLD;MAGENTA>several lines<RESET> + <BOLD;BLUE>-<RESET> <BOLD;BLUE> These two lines have had their<RESET> + <BOLD;BLUE>-<RESET><BOLD;BLUE> indentation reduced by four spaces<RESET> + <BOLD;MAGENTA>-<RESET> <BOLD;MAGENTA>different indentation change<RESET> + <RED>-<RESET><RED> too short<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN>Indented text to<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN>be further indented by four spaces across<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN> several lines<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW>too short without<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW> being grouped across blank line<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;CYAN>+<RESET> <BRED> <RESET> <BOLD;CYAN>These two lines have had their<RESET> + <BOLD;CYAN>+<RESET><BOLD;CYAN>indentation reduced by four spaces<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW>different indentation change<RESET> + <GREEN>+<RESET><BRED> <RESET> <GREEN>too short<RESET> + EOF + + test_cmp expected actual +' + test_done diff --git a/t/t4066-diff-emit-delay.sh b/t/t4066-diff-emit-delay.sh new file mode 100755 index 0000000..5df6b5e --- /dev/null +++ b/t/t4066-diff-emit-delay.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='test combined/stat/moved interaction' +. ./test-lib.sh + +# This test covers a weird 3-way interaction between "--cc -p", which will run +# the combined diff code, along with "--stat", which will be computed as a +# first-parent stat during the combined diff, and "--color-moved", which +# enables the emitted_symbols list to store the diff in memory. + +test_expect_success 'set up history with a merge' ' + test_commit A && + test_commit B && + git checkout -b side HEAD^ && + test_commit C && + git merge -m M master && + test_commit D +' + +test_expect_success 'log --cc -p --stat --color-moved' ' + cat >expect <<-\EOF && + commit D + --- + D.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/D.t b/D.t + new file mode 100644 + index 0000000..1784810 + --- /dev/null + +++ b/D.t + @@ -0,0 +1 @@ + +D + commit M + + B.t | 1 + + 1 file changed, 1 insertion(+) + commit C + --- + C.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/C.t b/C.t + new file mode 100644 + index 0000000..3cc58df + --- /dev/null + +++ b/C.t + @@ -0,0 +1 @@ + +C + commit B + --- + B.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/B.t b/B.t + new file mode 100644 + index 0000000..223b783 + --- /dev/null + +++ b/B.t + @@ -0,0 +1 @@ + +B + commit A + --- + A.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/A.t b/A.t + new file mode 100644 + index 0000000..f70f10e + --- /dev/null + +++ b/A.t + @@ -0,0 +1 @@ + +A + EOF + git log --format="commit %s" --cc -p --stat --color-moved >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 978a8a6..7df8c3d 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -621,4 +621,54 @@ test_expect_success 'trailer parsing not fooled by --- line' ' test_cmp expect actual ' +test_expect_success 'set up %S tests' ' + git checkout --orphan source-a && + test_commit one && + test_commit two && + git checkout -b source-b HEAD^ && + test_commit three +' + +test_expect_success 'log --format=%S paints branch names' ' + cat >expect <<-\EOF && + source-b + source-a + source-b + EOF + git log --format=%S source-a source-b >actual && + test_cmp expect actual +' + +test_expect_success 'log --format=%S paints tag names' ' + git tag -m tagged source-tag && + cat >expect <<-\EOF && + source-tag + source-a + source-tag + EOF + git log --format=%S source-tag source-a >actual && + test_cmp expect actual +' + +test_expect_success 'log --format=%S paints symmetric ranges' ' + cat >expect <<-\EOF && + source-b + source-a + EOF + git log --format=%S source-a...source-b >actual && + test_cmp expect actual +' + +test_expect_success '%S in git log --format works with other placeholders (part 1)' ' + git log --format="source-b %h" source-b >expect && + git log --format="%S %h" source-b >actual && + test_cmp expect actual +' + +test_expect_success '%S in git log --format works with other placeholders (part 2)' ' + git log --format="%h source-b" source-b >expect && + git log --format="%h %S" source-b >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4209-log-pickaxe.sh b/t/t4209-log-pickaxe.sh index 844df76..5d06f5f 100755 --- a/t/t4209-log-pickaxe.sh +++ b/t/t4209-log-pickaxe.sh @@ -106,4 +106,39 @@ test_expect_success 'log -S --no-textconv (missing textconv tool)' ' rm .gitattributes ' +test_expect_success 'setup log -[GS] binary & --text' ' + git checkout --orphan GS-binary-and-text && + git read-tree --empty && + printf "a\na\0a\n" >data.bin && + git add data.bin && + git commit -m "create binary file" data.bin && + printf "a\na\0a\n" >>data.bin && + git commit -m "modify binary file" data.bin && + git rm data.bin && + git commit -m "delete binary file" data.bin && + git log >full-log +' + +test_expect_success 'log -G ignores binary files' ' + git log -Ga >log && + test_must_be_empty log +' + +test_expect_success 'log -G looks into binary files with -a' ' + git log -a -Ga >log && + test_cmp log full-log +' + +test_expect_success 'log -G looks into binary files with textconv filter' ' + test_when_finished "rm .gitattributes" && + echo "* diff=bin" >.gitattributes && + git -c diff.bin.textconv=cat log -Ga >log && + test_cmp log full-log +' + +test_expect_success 'log -S looks into binary files' ' + git log -Sa >log && + test_cmp log full-log +' + test_done diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index ced4435..271eb5a 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -3,8 +3,12 @@ test_description='test corner cases of git-archive' . ./test-lib.sh -test_expect_success 'create commit with empty tree' ' - git commit --allow-empty -m foo +# the 10knuls.tar file is used to test for an empty git generated tar +# without having to invoke tar because an otherwise valid empty GNU tar +# will be considered broken by {Open,Net}BSD tar +test_expect_success 'create commit with empty tree and fake empty tar' ' + git commit --allow-empty -m foo && + perl -e "print \"\\0\" x 10240" >10knuls.tar ' # Make a dir and clean it up afterwards @@ -47,7 +51,6 @@ test_expect_success HEADER_ONLY_TAR_OK 'tar archive of commit with empty tree' ' test_expect_success 'tar archive of empty tree is empty' ' git archive --format=tar HEAD: >empty.tar && - perl -e "print \"\\0\" x 10240" >10knuls.tar && test_cmp_bin 10knuls.tar empty.tar ' @@ -106,16 +109,12 @@ test_expect_success 'create a commit with an empty subtree' ' test_expect_success 'archive empty subtree with no pathspec' ' git archive --format=tar $root_tree >subtree-all.tar && - make_dir extract && - "$TAR" xf subtree-all.tar -C extract && - check_dir extract + test_cmp_bin 10knuls.tar subtree-all.tar ' test_expect_success 'archive empty subtree by direct pathspec' ' git archive --format=tar $root_tree -- sub >subtree-path.tar && - make_dir extract && - "$TAR" xf subtree-path.tar -C extract && - check_dir extract + test_cmp_bin 10knuls.tar subtree-path.tar ' ZIPINFO=zipinfo diff --git a/t/t5315-pack-objects-compression.sh b/t/t5315-pack-objects-compression.sh index 34c47da..df970d7 100755 --- a/t/t5315-pack-objects-compression.sh +++ b/t/t5315-pack-objects-compression.sh @@ -7,7 +7,7 @@ test_description='pack-object compression configuration' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } test_expect_success setup ' diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh index 5fe21db..16d10eb 100755 --- a/t/t5318-commit-graph.sh +++ b/t/t5318-commit-graph.sh @@ -122,7 +122,7 @@ test_expect_success 'write graph with merges' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "10" "large_edges" + graph_read_expect "10" "extra_edges" ' graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2 @@ -157,7 +157,7 @@ test_expect_success 'write graph with new commit' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -167,7 +167,7 @@ test_expect_success 'write graph with nothing new' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -177,7 +177,7 @@ test_expect_success 'build graph from latest pack with closure' ' cd "$TRASH_DIRECTORY/full" && cat new-idx | git commit-graph write --stdin-packs && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "9" "large_edges" + graph_read_expect "9" "extra_edges" ' graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1 @@ -200,7 +200,7 @@ test_expect_success 'build graph from commits with append' ' cd "$TRASH_DIRECTORY/full" && git rev-parse merge/3 | git commit-graph write --stdin-commits --append && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "10" "large_edges" + graph_read_expect "10" "extra_edges" ' graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -210,7 +210,7 @@ test_expect_success 'build graph using --reachable' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write --reachable && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -231,7 +231,7 @@ test_expect_success 'write graph in bare repo' ' cd "$TRASH_DIRECTORY/bare" && git commit-graph write && test_path_is_file $baredir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1 @@ -366,9 +366,10 @@ GRAPH_OCTOPUS_DATA_OFFSET=$(($GRAPH_COMMIT_DATA_OFFSET + \ GRAPH_BYTE_OCTOPUS=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4)) GRAPH_BYTE_FOOTER=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4 * $NUM_OCTOPUS_EDGES)) -# usage: corrupt_graph_and_verify <position> <data> <string> +# usage: corrupt_graph_and_verify <position> <data> <string> [<zero_pos>] # Manipulates the commit-graph file at the position -# by inserting the data, then runs 'git commit-graph verify' +# by inserting the data, optionally zeroing the file +# starting at <zero_pos>, then runs 'git commit-graph verify' # and places the output in the file 'err'. Test 'err' for # the given string. corrupt_graph_and_verify() { @@ -376,11 +377,15 @@ corrupt_graph_and_verify() { data="${2:-\0}" grepstr=$3 cd "$TRASH_DIRECTORY/full" && + orig_size=$(wc -c < $objdir/info/commit-graph) && + zero_pos=${4:-${orig_size}} && test_when_finished mv commit-graph-backup $objdir/info/commit-graph && cp $objdir/info/commit-graph commit-graph-backup && printf "$data" | dd of="$objdir/info/commit-graph" bs=1 seek="$pos" conv=notrunc && + dd of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" count=0 && + dd if=/dev/zero of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" count=$(($orig_size - $zero_pos)) && test_must_fail git commit-graph verify 2>test_err && - grep -v "^+" test_err >err + grep -v "^+" test_err >err && test_i18ngrep "$grepstr" err } @@ -484,6 +489,11 @@ test_expect_success 'detect invalid checksum hash' ' "incorrect checksum" ' +test_expect_success 'detect incorrect chunk count' ' + corrupt_graph_and_verify $GRAPH_BYTE_CHUNK_COUNT "\377" \ + "chunk lookup table entry missing" $GRAPH_CHUNK_LOOKUP_OFFSET +' + test_expect_success 'git fsck (checks commit-graph)' ' cd "$TRASH_DIRECTORY/full" && git fsck && diff --git a/t/t5322-pack-objects-sparse.sh b/t/t5322-pack-objects-sparse.sh new file mode 100755 index 0000000..7124b55 --- /dev/null +++ b/t/t5322-pack-objects-sparse.sh @@ -0,0 +1,136 @@ +#!/bin/sh + +test_description='pack-objects object selection using sparse algorithm' +. ./test-lib.sh + +test_expect_success 'setup repo' ' + test_commit initial && + for i in $(test_seq 1 3) + do + mkdir f$i && + for j in $(test_seq 1 3) + do + mkdir f$i/f$j && + echo $j >f$i/f$j/data.txt + done + done && + git add . && + git commit -m "Initialized trees" && + for i in $(test_seq 1 3) + do + git checkout -b topic$i master && + echo change-$i >f$i/f$i/data.txt && + git commit -a -m "Changed f$i/f$i/data.txt" + done && + cat >packinput.txt <<-EOF && + topic1 + ^topic2 + ^topic3 + EOF + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f1 \ + topic1:f1/f1 \ + topic1:f1/f1/data.txt | sort >expect_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + test_cmp expect_objects.txt nonsparse_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_objects.txt sparse_objects.txt +' + +test_expect_success 'duplicate a folder from f3 and commit to topic1' ' + git checkout topic1 && + echo change-3 >f3/f3/data.txt && + git commit -a -m "Changed f3/f3/data.txt" && + git rev-parse \ + topic1~1 \ + topic1~1^{tree} \ + topic1^{tree} \ + topic1 \ + topic1:f1 \ + topic1:f1/f1 \ + topic1:f1/f1/data.txt | sort >required_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + comm -1 -2 required_objects.txt nonsparse_objects.txt >nonsparse_required_objects.txt && + test_cmp required_objects.txt nonsparse_required_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + comm -1 -2 required_objects.txt sparse_objects.txt >sparse_required_objects.txt && + test_cmp required_objects.txt sparse_required_objects.txt +' + +# Demonstrate that the algorithms differ when we copy a tree wholesale +# from one folder to another. + +test_expect_success 'duplicate a folder from f1 into f3' ' + mkdir f3/f4 && + cp -r f1/f1/* f3/f4 && + git add f3/f4 && + git commit -m "Copied f1/f1 to f3/f4" && + cat >packinput.txt <<-EOF && + topic1 + ^topic1~1 + EOF + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f3 | sort >required_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + comm -1 -2 required_objects.txt nonsparse_objects.txt >nonsparse_required_objects.txt && + test_cmp required_objects.txt nonsparse_required_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f3 \ + topic1:f3/f4 \ + topic1:f3/f4/data.txt | sort >expect_sparse_objects.txt && + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_sparse_objects.txt sparse_objects.txt +' + +test_expect_success 'pack.useSparse enables algorithm' ' + git config pack.useSparse true && + git pack-objects --stdout --revs <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_sparse_objects.txt sparse_objects.txt +' + +test_expect_success 'pack.useSparse overridden' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp required_objects.txt sparse_objects.txt +' + +test_done diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index fc898c9..a539ffc 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -7,82 +7,70 @@ test_description='Test the post-checkout hook.' . ./test-lib.sh test_expect_success setup ' - echo Data for commit0. >a && - echo Data for commit0. >b && - git update-index --add a && - git update-index --add b && - tree0=$(git write-tree) && - commit0=$(echo setup | git commit-tree $tree0) && - git update-ref refs/heads/master $commit0 && - git clone ./. clone1 && - git clone ./. clone2 && - GIT_DIR=clone2/.git git branch new2 && - echo Data for commit1. >clone2/b && - GIT_DIR=clone2/.git git add clone2/b && - GIT_DIR=clone2/.git git commit -m new2 -' - -for clone in 1 2; do - cat >clone${clone}/.git/hooks/post-checkout <<'EOF' -#!/bin/sh -echo $@ > $GIT_DIR/post-checkout.args -EOF - chmod u+x clone${clone}/.git/hooks/post-checkout -done - -test_expect_success 'post-checkout runs as expected ' ' - GIT_DIR=clone1/.git git checkout master && - test -e clone1/.git/post-checkout.args + mkdir -p .git/hooks && + write_script .git/hooks/post-checkout <<-\EOF && + echo "$@" >.git/post-checkout.args + EOF + test_commit one && + test_commit two && + test_commit rebase-on-me && + git reset --hard HEAD^ && + test_commit three ' test_expect_success 'post-checkout receives the right arguments with HEAD unchanged ' ' - old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout master && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 1 ' -test_expect_success 'post-checkout runs as expected ' ' - GIT_DIR=clone1/.git git checkout master && - test -e clone1/.git/post-checkout.args -' - test_expect_success 'post-checkout args are correct with git checkout -b ' ' - GIT_DIR=clone1/.git git checkout -b new1 && - old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b new1 && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args with HEAD changed ' ' - GIT_DIR=clone2/.git git checkout new2 && - old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout two && + read old new flag <.git/post-checkout.args && test $old != $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args when not switching branches ' ' - GIT_DIR=clone2/.git git checkout master b && - old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout master -- three.t && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 0 ' -if test "$(git config --bool core.filemode)" = true; then -mkdir -p templates/hooks -cat >templates/hooks/post-checkout <<'EOF' -#!/bin/sh -echo $@ > $GIT_DIR/post-checkout.args -EOF -chmod +x templates/hooks/post-checkout +test_expect_success 'post-checkout is triggered on rebase' ' + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b rebase-test master && + rm -f .git/post-checkout.args && + git rebase rebase-on-me && + read old new flag <.git/post-checkout.args && + test $old != $new && test $flag = 1 +' + +test_expect_success 'post-checkout is triggered on rebase with fast-forward' ' + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b ff-rebase-test rebase-on-me^ && + rm -f .git/post-checkout.args && + git rebase rebase-on-me && + read old new flag <.git/post-checkout.args && + test $old != $new && test $flag = 1 +' test_expect_success 'post-checkout hook is triggered by clone' ' + mkdir -p templates/hooks && + write_script templates/hooks/post-checkout <<-\EOF && + echo "$@" >$GIT_DIR/post-checkout.args + EOF git clone --template=templates . clone3 && test -f clone3/.git/post-checkout.args ' -fi test_done diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index 9b2a274..a4a5903 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -78,6 +78,7 @@ test_expect_success 'git rebase --skip' ' git rebase --continue && echo rebase >expected.args && cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) $(git rev-parse D) $(git rev-parse HEAD) EOF verify_hook_input @@ -91,6 +92,7 @@ test_expect_success 'git rebase --skip the last one' ' echo rebase >expected.args && cat >expected.data <<-EOF && $(git rev-parse E) $(git rev-parse HEAD) + $(git rev-parse F) $(git rev-parse HEAD) EOF verify_hook_input ' @@ -120,6 +122,38 @@ test_expect_success 'git rebase -m --skip' ' git rebase --continue && echo rebase >expected.args && cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase with implicit use of interactive backend' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --keep --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase --skip with implicit use of interactive backend' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --keep --onto A B && + test_must_fail git rebase --skip && + echo D > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) $(git rev-parse D) $(git rev-parse HEAD) EOF verify_hook_input diff --git a/t/t5409-colorize-remote-messages.sh b/t/t5409-colorize-remote-messages.sh index f81b681..2a8c449 100755 --- a/t/t5409-colorize-remote-messages.sh +++ b/t/t5409-colorize-remote-messages.sh @@ -17,6 +17,7 @@ test_expect_success 'setup' ' echo " " "error: leading space" echo " " echo Err + echo SUCCESS exit 0 EOF echo 1 >file && @@ -35,6 +36,7 @@ test_expect_success 'keywords' ' grep "<BOLD;RED>error<RESET>: error" decoded && grep "<YELLOW>hint<RESET>:" decoded && grep "<BOLD;GREEN>success<RESET>:" decoded && + grep "<BOLD;GREEN>SUCCESS<RESET>" decoded && grep "<BOLD;YELLOW>warning<RESET>:" decoded ' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 086f2c4..49c540b 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -439,15 +439,23 @@ test_expect_success 'setup tests for the --stdin parameter' ' ) >input.dup ' -test_expect_success 'fetch refs from cmdline' ' - ( - cd client && - git fetch-pack --no-progress .. $(cat ../input) - ) >output && - cut -d " " -f 2 <output | sort >actual && - test_cmp expect actual +test_expect_success 'setup fetch refs from cmdline v[12]' ' + cp -r client client1 && + cp -r client client2 ' +for version in '' 1 2 +do + test_expect_success "protocol.version=$version fetch refs from cmdline" " + ( + cd client$version && + GIT_TEST_PROTOCOL_VERSION=$version git fetch-pack --no-progress .. \$(cat ../input) + ) >output && + cut -d ' ' -f 2 <output | sort >actual && + test_cmp expect actual + " +done + test_expect_success 'fetch refs from stdin' ' ( cd client && diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 32e722d..ced15ae 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -204,6 +204,12 @@ test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' grep refs/tags/magic actual ' +test_expect_success 'protocol v2 supports hiderefs' ' + test_config uploadpack.hiderefs refs/tags && + git -c protocol.version=2 ls-remote . >actual && + ! grep refs/tags actual +' + test_expect_success 'ls-remote --symref' ' git fetch origin && cat >expect <<-EOF && @@ -260,7 +266,7 @@ test_lazy_prereq GIT_DAEMON ' # This test spawns a daemon, so run it only if the user would be OK with # testing with git-daemon. test_expect_success PIPE,JGIT,GIT_DAEMON 'indicate no refs in standards-compliant empty remote' ' - JGIT_DAEMON_PORT=${JGIT_DAEMON_PORT-${this_test#t}} && + test_set_port JGIT_DAEMON_PORT && JGIT_DAEMON_PID= && git init --bare empty.git && >empty.git/git-daemon-export-ok && diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 6c2f9b2..63205df 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -524,6 +524,8 @@ test_expect_success 'fetching submodules respects parallel settings' ' git config fetch.recurseSubmodules true && ( cd downstream && + GIT_TRACE=$(pwd)/trace.out git fetch && + grep "1 tasks" trace.out && GIT_TRACE=$(pwd)/trace.out git fetch --jobs 7 && grep "7 tasks" trace.out && git config submodule.fetchJobs 8 && @@ -600,4 +602,121 @@ test_expect_success "fetch new commits when submodule got renamed" ' test_cmp expect actual ' +test_expect_success "fetch new submodule commits on-demand outside standard refspec" ' + # add a second submodule and ensure it is around in downstream first + git clone submodule sub1 && + git submodule add ./sub1 && + git commit -m "adding a second submodule" && + git -C downstream pull && + git -C downstream submodule update --init --recursive && + + git checkout --detach && + + C=$(git -C submodule commit-tree -m "new change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/1 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "new change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/2 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/3 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/3:refs/heads/my_branch && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commit on-demand in FETCH_HEAD' ' + # depends on the previous test for setup + + C=$(git -C submodule commit-tree -m "another change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/4 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "another change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/5 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/6 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/6 && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commits on-demand without .gitmodules entry' ' + # depends on the previous test for setup + + git config -f .gitmodules --remove-section submodule.sub1 && + git add .gitmodules && + git commit -m "delete gitmodules file" && + git checkout -B master && + git -C downstream fetch && + git -C downstream checkout origin/master && + + C=$(git -C submodule commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/7 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/8 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/9 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/9 && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commit intermittently referenced by superproject' ' + # depends on the previous test for setup + + D=$(git -C sub1 commit-tree -m "change 10 outside refs/heads" HEAD^{tree}) && + E=$(git -C sub1 commit-tree -m "change 11 outside refs/heads" HEAD^{tree}) && + F=$(git -C sub1 commit-tree -m "change 12 outside refs/heads" HEAD^{tree}) && + + git -C sub1 update-ref refs/changes/10 $D && + git update-index --cacheinfo 160000 $D sub1 && + git commit -m "updated submodules outside of refs/heads" && + + git -C sub1 update-ref refs/changes/11 $E && + git update-index --cacheinfo 160000 $E sub1 && + git commit -m "updated submodules outside of refs/heads" && + + git -C sub1 update-ref refs/changes/12 $F && + git update-index --cacheinfo 160000 $F sub1 && + git commit -m "updated submodules outside of refs/heads" && + + G=$(git rev-parse HEAD) && + git update-ref refs/changes/13 $G && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/13 && + + git -C sub1 cat-file -t $D && + git -C sub1 cat-file -t $E && + git -C sub1 cat-file -t $F + ) +' + test_done diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 6faf17e..6caf628 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -243,7 +243,8 @@ test_expect_success 'shallow fetches check connectivity before writing shallow f "$(git -C "$REPO" rev-parse HEAD)" \ "$(git -C "$REPO" rev-parse HEAD^)" \ >"$HTTPD_ROOT_PATH/one-time-sed" && - test_must_fail git -C client fetch --depth=1 "$HTTPD_URL/one_time_sed/repo" \ + test_must_fail env GIT_TEST_SIDEBAND_ALL=0 git -C client \ + fetch --depth=1 "$HTTPD_URL/one_time_sed/repo" \ master:a_branch && # Ensure that the one-time-sed script was used. diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 7466aad..58ee787 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -183,19 +183,6 @@ test_expect_success 'hostname cannot break out of directory' ' git ls-remote "$GIT_DAEMON_URL/escape.git" ' -test_expect_success 'daemon log records all attributes' ' - cat >expect <<-\EOF && - Extended attribute "host": localhost - Extended attribute "protocol": version=1 - EOF - >daemon.log && - GIT_OVERRIDE_VIRTUAL_HOST=localhost \ - git -c protocol.version=1 \ - ls-remote "$GIT_DAEMON_URL/interp.git" && - grep -i extended.attribute daemon.log | cut -d" " -f2- >actual && - test_cmp expect actual -' - test_expect_success FAKENC 'hostname interpolation works after LF-stripping' ' { printf "git-upload-pack /interp.git\n\0host=localhost" | packetize diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-clone-push-unc.sh index ba548df..217adf3 100755 --- a/t/t5580-clone-push-unc.sh +++ b/t/t5580-clone-push-unc.sh @@ -40,6 +40,11 @@ test_expect_success clone ' git clone "file://$UNCPATH" clone ' +test_expect_success 'clone with backslashed path' ' + BACKSLASHED="$(echo "$UNCPATH" | tr / \\\\)" && + git clone "$BACKSLASHED" backslashed +' + test_expect_success push ' ( cd clone && diff --git a/t/t5581-http-curl-verbose.sh b/t/t5581-http-curl-verbose.sh new file mode 100755 index 0000000..cd9283e --- /dev/null +++ b/t/t5581-http-curl-verbose.sh @@ -0,0 +1,28 @@ +#!/bin/sh + +test_description='test GIT_CURL_VERBOSE' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'setup repository' ' + mkdir "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" --bare init && + git config push.default matching && + echo content >file && + git add file && + git commit -m one && + git remote add public "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + git push public master:master +' + +test_expect_success 'failure in git-upload-pack is shown' ' + test_might_fail env GIT_CURL_VERBOSE=1 \ + git clone "$HTTPD_URL/error_git_upload_pack/smart/repo.git" \ + 2>curl_log && + grep "< HTTP/1.1 500 Intentional Breakage" curl_log +' + +stop_httpd + +test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 8bbc706..d6948cb 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -487,7 +487,7 @@ test_clone_url () { expect_ssh "$@" } -test_expect_success !MINGW 'clone c:temp is ssl' ' +test_expect_success !MINGW,!CYGWIN 'clone c:temp is ssl' ' test_clone_url c:temp c temp ' diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh index ae79c6b..fe45bf8 100755 --- a/t/t5701-git-serve.sh +++ b/t/t5701-git-serve.sh @@ -14,7 +14,7 @@ test_expect_success 'test capability advertisement' ' 0000 EOF - git serve --advertise-capabilities >out && + GIT_TEST_SIDEBAND_ALL=0 git serve --advertise-capabilities >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index 0f2b09e..db4ae09 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -471,6 +471,53 @@ test_expect_success 'upload-pack respects client shallows' ' grep "fetch< version 2" trace ' +test_expect_success 'ensure that multiple fetches in same process from a shallow repo works' ' + rm -rf server client trace && + + test_create_repo server && + test_commit -C server one && + test_commit -C server two && + test_commit -C server three && + git clone --shallow-exclude two "file://$(pwd)/server" client && + + git -C server tag -a -m "an annotated tag" twotag two && + + # Triggers tag following (thus, 2 fetches in one process) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --shallow-exclude one origin && + # Ensure that protocol v2 is used + grep "fetch< version 2" trace +' + +test_expect_success 'deepen-relative' ' + rm -rf server client trace && + + test_create_repo server && + test_commit -C server one && + test_commit -C server two && + test_commit -C server three && + git clone --depth 1 "file://$(pwd)/server" client && + test_commit -C server four && + + # Sanity check that only "three" is downloaded + git -C client log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --deepen=1 origin && + # Ensure that protocol v2 is used + grep "fetch< version 2" trace && + + git -C client log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual +' + # Test protocol v2 with 'http://' transport # . "$TEST_DIRECTORY"/lib-httpd.sh @@ -514,6 +561,27 @@ test_expect_success 'fetch with http:// using protocol v2' ' grep "git< version 2" log ' +test_expect_success 'fetch from namespaced repo respects namespaces' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" one && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" two && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" \ + update-ref refs/namespaces/ns/refs/heads/master one && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch "$HTTPD_URL/smart_namespace/nsrepo" \ + refs/heads/master:refs/heads/theirs && + + # Server responded using protocol v2 + grep "fetch< version 2" log && + + git -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" rev-parse one >expect && + git -C http_child rev-parse theirs >actual && + test_cmp expect actual +' + test_expect_success 'push with http:// and a config of v2 does not request v2' ' test_when_finished "rm -f log" && # Till v2 for push is designed, make sure that if a client has @@ -583,8 +651,8 @@ test_expect_success 'when server does not send "ready", expect FLUSH' ' test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" git -C http_child \ -c protocol.version=2 \ fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && - grep "fetch< acknowledgments" log && - ! grep "fetch< ready" log && + grep "fetch< .*acknowledgments" log && + ! grep "fetch< .*ready" log && test_i18ngrep "expected no other sections to be sent after no .ready." err ' diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index 7053899..f87b2f6 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -208,7 +208,7 @@ test_expect_success 'server is initially ahead - no ref in want' ' cp -r "$LOCAL_PRISTINE" local && inconsistency master 1234567890123456789012345678901234567890 && test_must_fail git -C local fetch 2>err && - test_i18ngrep "ERR upload-pack: not our ref" err + test_i18ngrep "fatal: remote error: upload-pack: not our ref" err ' test_expect_success 'server is initially ahead - ref in want' ' @@ -254,7 +254,7 @@ test_expect_success 'server loses a ref - ref in want' ' echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && test_must_fail git -C local fetch 2>err && - test_i18ngrep "ERR unknown ref refs/heads/raster" err + test_i18ngrep "fatal: remote error: unknown ref refs/heads/raster" err ' stop_httpd diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index ec42c2f..da113d9 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -185,6 +185,10 @@ test_expect_success 'basic colors' ' test_cmp expect actual ' +test_expect_success '%S is not a placeholder for rev-list yet' ' + git rev-list --format="%S" -1 master | grep "%S" +' + test_expect_success 'advanced colors' ' cat >expect <<-EOF && commit $head2 diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index f84ff94..55835ee 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -802,7 +802,7 @@ test_expect_success 'bisect terms needs 0 or 1 argument' ' test_must_fail git bisect terms only-one && test_must_fail git bisect terms 1 2 && test_must_fail git bisect terms 2>actual && - echo "no terms defined" >expected && + echo "error: no terms defined" >expected && test_i18ncmp expected actual ' diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index 7cc34e7..09dfa8b 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -1175,7 +1175,7 @@ test_expect_success 'setup nested conflicts from rename/rename(2to1)' ' # Handle the left side git checkout L && - git mv one three && + git rm one two && mv -f file_v2 three && mv -f file_v5 two && git add two three && @@ -1183,7 +1183,7 @@ test_expect_success 'setup nested conflicts from rename/rename(2to1)' ' # Handle the right side git checkout R && - git mv two three && + git rm one two && mv -f file_v3 one && mv -f file_v6 three && git add one three && diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh index eb32505..9c11427 100755 --- a/t/t6112-rev-list-filters-objects.sh +++ b/t/t6112-rev-list-filters-objects.sh @@ -283,7 +283,7 @@ test_expect_success 'verify tree:0 includes trees in "filtered" output' ' # Make sure tree:0 does not iterate through any trees. -test_expect_success 'filter a GIANT tree through tree:0' ' +test_expect_success 'verify skipping tree iteration when not collecting omits' ' GIT_TRACE=1 git -C r3 rev-list \ --objects --filter=tree:0 HEAD 2>filter_trace && grep "Skipping contents of tree [.][.][.]" filter_trace >actual && @@ -294,6 +294,126 @@ test_expect_success 'filter a GIANT tree through tree:0' ' ! grep "Skipping contents of tree [^.]" filter_trace ' +# Test tree:# filters. + +expect_has () { + commit=$1 && + name=$2 && + + hash=$(git -C r3 rev-parse $commit:$name) && + grep "^$hash $name$" actual +} + +test_expect_success 'verify tree:1 includes root trees' ' + git -C r3 rev-list --objects --filter=tree:1 HEAD >actual && + + # We should get two root directories and two commits. + expect_has HEAD "" && + expect_has HEAD~1 "" && + test_line_count = 4 actual +' + +test_expect_success 'verify tree:2 includes root trees and immediate children' ' + git -C r3 rev-list --objects --filter=tree:2 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + expect_has HEAD pattern && + expect_has HEAD sparse1 && + expect_has HEAD sparse2 && + + # There are also 2 commit objects + test_line_count = 8 actual +' + +test_expect_success 'verify tree:3 includes everything expected' ' + git -C r3 rev-list --objects --filter=tree:3 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + expect_has HEAD dir1/sparse1 && + expect_has HEAD dir1/sparse2 && + expect_has HEAD pattern && + expect_has HEAD sparse1 && + expect_has HEAD sparse2 && + + # There are also 2 commit objects + test_line_count = 10 actual +' + +# Test provisional omit collection logic with a repo that has objects appearing +# at multiple depths - first deeper than the filter's threshold, then shallow. + +test_expect_success 'setup r4' ' + git init r4 && + + echo foo > r4/foo && + mkdir r4/subdir && + echo bar > r4/subdir/bar && + + mkdir r4/filt && + cp -r r4/foo r4/subdir r4/filt && + + git -C r4 add foo subdir filt && + git -C r4 commit -m "commit msg" +' + +expect_has_with_different_name () { + repo=$1 && + name=$2 && + + hash=$(git -C $repo rev-parse HEAD:$name) && + ! grep "^$hash $name$" actual && + grep "^$hash " actual && + ! grep "~$hash" actual +} + +test_expect_success 'test tree:# filter provisional omit for blob and tree' ' + git -C r4 rev-list --objects --filter-print-omitted --filter=tree:2 \ + HEAD >actual && + expect_has_with_different_name r4 filt/foo && + expect_has_with_different_name r4 filt/subdir +' + +test_expect_success 'verify skipping tree iteration when collecting omits' ' + GIT_TRACE=1 git -C r4 rev-list --filter-print-omitted \ + --objects --filter=tree:0 HEAD 2>filter_trace && + grep "^Skipping contents of tree " filter_trace >actual && + + echo "Skipping contents of tree subdir/..." >expect && + test_cmp expect actual +' + +# Test tree:<depth> where a tree is iterated to twice - once where a subentry is +# too deep to be included, and again where the blob inside it is shallow enough +# to be included. This makes sure we don't use LOFR_MARK_SEEN incorrectly (we +# can't use it because a tree can be iterated over again at a lower depth). + +test_expect_success 'tree:<depth> where we iterate over tree at two levels' ' + git init r5 && + + mkdir -p r5/a/subdir/b && + echo foo > r5/a/subdir/b/foo && + + mkdir -p r5/subdir/b && + echo foo > r5/subdir/b/foo && + + git -C r5 add a subdir && + git -C r5 commit -m "commit msg" && + + git -C r5 rev-list --objects --filter=tree:4 HEAD >actual && + expect_has_with_different_name r5 a/subdir/b/foo +' + +test_expect_success 'tree:<depth> which filters out blob but given as arg' ' + blob_hash=$(git -C r4 rev-parse HEAD:subdir/bar) && + + git -C r4 rev-list --objects --filter=tree:1 HEAD $blob_hash >actual && + grep ^$blob_hash actual +' + # Delete some loose objects and use rev-list, but WITHOUT any filtering. # This models previously omitted objects that we did not receive. @@ -324,4 +444,21 @@ test_expect_success 'rev-list W/ missing=allow-any' ' git -C r1 rev-list --quiet --missing=allow-any --objects HEAD ' +# Test expansion of filter specs. + +test_expect_success 'expand blob limit in protocol' ' + git -C r2 config --local uploadpack.allowfilter 1 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 clone \ + --filter=blob:limit=1k "file://$(pwd)/r2" limit && + ! grep "blob:limit=1k" trace && + grep "blob:limit=1024" trace +' + +test_expect_success 'expand tree depth limit in protocol' ' + GIT_TRACE_PACKET="$(pwd)/tree_trace" git -c protocol.version=2 clone \ + --filter=tree:0k "file://$(pwd)/r2" tree && + ! grep "tree:0k" tree_trace && + grep "tree:0" tree_trace +' + test_done diff --git a/t/t6135-pathspec-with-attrs.sh b/t/t6135-pathspec-with-attrs.sh index e436a73..457cc16 100755 --- a/t/t6135-pathspec-with-attrs.sh +++ b/t/t6135-pathspec-with-attrs.sh @@ -31,7 +31,7 @@ test_expect_success 'setup a tree' ' mkdir sub && while read path do - : >$path && + echo content >$path && git add $path || return 1 done <expect && git commit -m "initial commit" && @@ -48,6 +48,10 @@ test_expect_success 'pathspec with labels and non existent .gitattributes' ' test_must_be_empty actual ' +test_expect_success 'pathspec with labels and non existent .gitattributes (2)' ' + test_must_fail git grep content HEAD -- ":(attr:label)" +' + test_expect_success 'setup .gitattributes' ' cat <<-\EOF >.gitattributes && fileA labelA @@ -74,6 +78,15 @@ test_expect_success 'check specific set attr' ' test_cmp expect actual ' +test_expect_success 'check specific set attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileSetLabel + HEAD:sub/fileSetLabel + EOF + git grep -l content HEAD ":(attr:label)" >actual && + test_cmp expect actual +' + test_expect_success 'check specific unset attr' ' cat <<-\EOF >expect && fileUnsetLabel @@ -83,6 +96,15 @@ test_expect_success 'check specific unset attr' ' test_cmp expect actual ' +test_expect_success 'check specific unset attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileUnsetLabel + HEAD:sub/fileUnsetLabel + EOF + git grep -l content HEAD ":(attr:-label)" >actual && + test_cmp expect actual +' + test_expect_success 'check specific value attr' ' cat <<-\EOF >expect && fileValue @@ -94,6 +116,16 @@ test_expect_success 'check specific value attr' ' test_must_be_empty actual ' +test_expect_success 'check specific value attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileValue + HEAD:sub/fileValue + EOF + git grep -l content HEAD ":(attr:label=foo)" >actual && + test_cmp expect actual && + test_must_fail git grep -l content HEAD ":(attr:label=bar)" +' + test_expect_success 'check unspecified attr' ' cat <<-\EOF >expect && .gitattributes @@ -118,6 +150,30 @@ test_expect_success 'check unspecified attr' ' test_cmp expect actual ' +test_expect_success 'check unspecified attr (2)' ' + cat <<-\EOF >expect && + HEAD:.gitattributes + HEAD:fileA + HEAD:fileAB + HEAD:fileAC + HEAD:fileB + HEAD:fileBC + HEAD:fileC + HEAD:fileNoLabel + HEAD:fileWrongLabel + HEAD:sub/fileA + HEAD:sub/fileAB + HEAD:sub/fileAC + HEAD:sub/fileB + HEAD:sub/fileBC + HEAD:sub/fileC + HEAD:sub/fileNoLabel + HEAD:sub/fileWrongLabel + EOF + git grep -l ^ HEAD ":(attr:!label)" >actual && + test_cmp expect actual +' + test_expect_success 'check multiple unspecified attr' ' cat <<-\EOF >expect && .gitattributes diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 97bfbee..0ffd630 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -83,6 +83,8 @@ test_atom head push:strip=1 remotes/myfork/master test_atom head push:strip=-1 master test_atom head objecttype commit test_atom head objectsize 171 +test_atom head objectsize:disk 138 +test_atom head deltabase 0000000000000000000000000000000000000000 test_atom head objectname $(git rev-parse refs/heads/master) test_atom head objectname:short $(git rev-parse --short refs/heads/master) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -124,6 +126,10 @@ test_atom tag upstream '' test_atom tag push '' test_atom tag objecttype tag test_atom tag objectsize 154 +test_atom tag objectsize:disk 138 +test_atom tag '*objectsize:disk' 138 +test_atom tag deltabase 0000000000000000000000000000000000000000 +test_atom tag '*deltabase' 0000000000000000000000000000000000000000 test_atom tag objectname $(git rev-parse refs/tags/testtag) test_atom tag objectname:short $(git rev-parse --short refs/tags/testtag) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 76a7cb0..aba2d4d 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -984,6 +984,11 @@ test_expect_success 'submodule deinit should remove the whole submodule section rmdir init ' +test_expect_success 'submodule deinit should unset core.worktree' ' + test_path_is_file .git/modules/example/config && + test_must_fail git config -f .git/modules/example/config core.worktree +' + test_expect_success 'submodule deinit from subdirectory' ' git submodule update --init && git config submodule.example.foo bar && diff --git a/t/t7412-submodule-absorbgitdirs.sh b/t/t7412-submodule-absorbgitdirs.sh index ce74c12..1cfa150 100755 --- a/t/t7412-submodule-absorbgitdirs.sh +++ b/t/t7412-submodule-absorbgitdirs.sh @@ -75,7 +75,12 @@ test_expect_success 're-setup nested submodule' ' GIT_WORK_TREE=../../../nested git -C sub1/.git/modules/nested config \ core.worktree "../../../nested" && # make sure this re-setup is correct - git status --ignore-submodules=none + git status --ignore-submodules=none && + + # also make sure this old setup does not regress + git submodule update --init --recursive >out 2>err && + test_must_be_empty out && + test_must_be_empty err ' test_expect_success 'absorb the git dir in a nested submodule' ' diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index ebfcad9..ba8bd1b 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -215,7 +215,7 @@ test_expect_success 'with hook and editor (merge)' ' test_rebase () { expect=$1 && mode=$2 && - test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase $mode)" ' + test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase ${mode:--i})" ' test_when_finished "\ git rebase --abort git checkout -f master @@ -225,7 +225,7 @@ test_rebase () { GIT_EDITOR="\"$FAKE_EDITOR\"" && ( export GIT_SEQUENCE_EDITOR GIT_EDITOR && - test_must_fail git rebase $mode b && + test_must_fail git rebase -i $mode b && echo x >a && git add a && test_must_fail git rebase --continue && @@ -241,18 +241,18 @@ test_rebase () { git add b && git rebase --continue ) && - if test $mode = -p # reword amended after pick + if test "$mode" = -p # reword amended after pick then n=18 else n=17 fi && git log --pretty=%s -g -n$n HEAD@{1} >actual && - test_cmp "$TEST_DIRECTORY/t7505/expected-rebase$mode" actual + test_cmp "$TEST_DIRECTORY/t7505/expected-rebase${mode:--i}" actual ' } -test_rebase success -i +test_rebase success test_have_prereq !REBASE_P || test_rebase success -p test_expect_success 'with hook (cherry-pick)' ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 86d3f93..682b23a 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -49,15 +49,28 @@ test_expect_success GPG 'create signed commits' ' git tag eighth-signed-alt && # commit.gpgsign is still on but this must not be signed - git tag ninth-unsigned $(echo 9 | git commit-tree HEAD^{tree}) && + echo 9 | git commit-tree HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag ninth-unsigned $(cat oid) && # explicit -S of course must sign. - git tag tenth-signed $(echo 9 | git commit-tree -S HEAD^{tree}) + echo 10 | git commit-tree -S HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag tenth-signed $(cat oid) && + + # --gpg-sign[=<key-id>] must sign. + echo 11 | git commit-tree --gpg-sign HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag eleventh-signed $(cat oid) && + echo 12 | git commit-tree --gpg-sign=B7227189 HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag twelfth-signed-alt $(cat oid) ' test_expect_success GPG 'verify and show signatures' ' ( for commit in initial second merge fourth-signed \ - fifth-signed sixth-signed seventh-signed tenth-signed + fifth-signed sixth-signed seventh-signed tenth-signed \ + eleventh-signed do git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && @@ -78,7 +91,7 @@ test_expect_success GPG 'verify and show signatures' ' done ) && ( - for commit in eighth-signed-alt + for commit in eighth-signed-alt twelfth-signed-alt do git show --pretty=short --show-signature $commit >actual && grep "Good signature from" actual && diff --git a/t/t9303-fast-import-compression.sh b/t/t9303-fast-import-compression.sh index 856219f..5045f02 100755 --- a/t/t9303-fast-import-compression.sh +++ b/t/t9303-fast-import-compression.sh @@ -6,7 +6,7 @@ test_description='compression setting of fast-import utility' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } import_large () { diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 2325599..850d979 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -500,6 +500,10 @@ test_expect_success 'submit --shelve' ' ) ' +last_shelve () { + p4 -G changes -s shelved -m 1 //depot/... | marshal_dump change +} + make_shelved_cl() { test_commit "$1" >/dev/null && git p4 submit --origin HEAD^ --shelve >/dev/null && @@ -533,12 +537,59 @@ test_expect_success 'submit --update-shelve' ' ) && ( cd "$cli" && - change=$(p4 -G changes -s shelved -m 1 //depot/... | \ - marshal_dump change) && + change=$(last_shelve) && p4 unshelve -c $change -s $change && grep -q updated-line shelf.t && p4 describe -S $change | grep added-file.t && - test_path_is_missing shelved-change-1.t + test_path_is_missing shelved-change-1.t && + p4 revert ... + ) +' + +test_expect_success 'update a shelve involving moved and copied files' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + : >file_to_move && + p4 add file_to_move && + p4 submit -d "change1" && + p4 edit file_to_move && + echo change >>file_to_move && + p4 submit -d "change2" && + p4 opened + ) && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.detectCopies true && + git config git-p4.detectRenames true && + git config git-p4.skipSubmitEdit true && + mkdir moved && + cp file_to_move copy_of_file && + git add copy_of_file && + git mv file_to_move moved/ && + git commit -m "rename a file" && + git p4 submit -M --shelve --origin HEAD^ && + : >new_file && + git add new_file && + git commit --amend && + git show --stat HEAD && + change=$(last_shelve) && + git p4 submit -M --update-shelve $change --commit HEAD + ) && + ( + cd "$cli" && + change=$(last_shelve) && + echo change=$change && + p4 unshelve -s $change && + p4 submit -d "Testing update-shelve" && + test_path_is_file copy_of_file && + test_path_is_file moved/file_to_move && + test_path_is_missing file_to_move && + test_path_is_file new_file && + echo "unshelved and submitted change $change" && + p4 changes moved/file_to_move | grep "Testing update-shelve" && + p4 changes copy_of_file | grep "Testing update-shelve" ) ' diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 6558eee..3a2c632 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -1516,8 +1516,8 @@ test_expect_success 'show completes all refs' ' test_expect_success '<ref>: completes paths' ' test_completion "git show mytag:f" <<-\EOF - file1 Z - file2 Z + file1Z + file2Z EOF ' @@ -1526,7 +1526,7 @@ test_expect_success 'complete tree filename with spaces' ' git add "name with spaces" && git commit -m spaces && test_completion "git show HEAD:nam" <<-\EOF - name with spaces Z + name with spacesZ EOF ' @@ -1535,8 +1535,8 @@ test_expect_success 'complete tree filename with metacharacters' ' git add "name with \${meta}" && git commit -m meta && test_completion "git show HEAD:nam" <<-\EOF - name with ${meta} Z - name with spaces Z + name with ${meta}Z + name with spacesZ EOF ' diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 81a5179..5cadedb 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -180,7 +180,7 @@ test_expect_success 'prompt - interactive rebase' ' ' test_expect_success 'prompt - rebase merge' ' - printf " (b2|REBASE-m 1/3)" >expected && + printf " (b2|REBASE-i 1/3)" >expected && git checkout b2 && test_when_finished "git checkout master" && test_must_fail git rebase --merge b1 b2 && diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 6b3bbf9..92cf8f8 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -1263,3 +1263,42 @@ test_oid () { fi && eval "printf '%s' \"\${$var}\"" } + +# Choose a port number based on the test script's number and store it in +# the given variable name, unless that variable already contains a number. +test_set_port () { + local var=$1 port + + if test $# -ne 1 || test -z "$var" + then + BUG "test_set_port requires a variable name" + fi + + eval port=\$$var + case "$port" in + "") + # No port is set in the given env var, use the test + # number as port number instead. + # Remove not only the leading 't', but all leading zeros + # as well, so the arithmetic below won't (mis)interpret + # a test number like '0123' as an octal value. + port=${this_test#${this_test%%[1-9]*}} + if test "${port:-0}" -lt 1024 + then + # root-only port, use a larger one instead. + port=$(($port + 10000)) + fi + ;; + *[^0-9]*|0*) + error >&7 "invalid port number: $port" + ;; + *) + # The user has specified the port. + ;; + esac + + # Make sure that parallel '--stress' test jobs get different + # ports. + port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0})) + eval $var=$port +} diff --git a/t/test-lib.sh b/t/test-lib.sh index 0f1faa2..42b1a0a 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -71,19 +71,227 @@ then exit 1 fi +# Parse options while taking care to leave $@ intact, so we will still +# have all the original command line options when executing the test +# script again for '--tee' and '--verbose-log' below. +store_arg_to= +prev_opt= +for opt +do + if test -n "$store_arg_to" + then + eval $store_arg_to=\$opt + store_arg_to= + prev_opt= + continue + fi + + case "$opt" in + -d|--d|--de|--deb|--debu|--debug) + debug=t ;; + -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) + immediate=t ;; + -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) + GIT_TEST_LONG=t; export GIT_TEST_LONG ;; + -r) + store_arg_to=run_list + ;; + --run=*) + run_list=${opt#--*=} ;; + -h|--h|--he|--hel|--help) + help=t ;; + -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) + verbose=t ;; + --verbose-only=*) + verbose_only=${opt#--*=} + ;; + -q|--q|--qu|--qui|--quie|--quiet) + # Ignore --quiet under a TAP::Harness. Saying how many tests + # passed without the ok/not ok details is always an error. + test -z "$HARNESS_ACTIVE" && quiet=t ;; + --with-dashes) + with_dashes=t ;; + --no-bin-wrappers) + no_bin_wrappers=t ;; + --no-color) + color= ;; + --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) + valgrind=memcheck + tee=t + ;; + --valgrind=*) + valgrind=${opt#--*=} + tee=t + ;; + --valgrind-only=*) + valgrind_only=${opt#--*=} + tee=t + ;; + --tee) + tee=t ;; + --root=*) + root=${opt#--*=} ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 ;; + -x) + trace=t ;; + -V|--verbose-log) + verbose_log=t + tee=t + ;; + --write-junit-xml) + write_junit_xml=t + ;; + --stress) + stress=t ;; + --stress=*) + stress=${opt#--*=} + case "$stress" in + *[^0-9]*|0*|"") + echo "error: --stress=<N> requires the number of jobs to run" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac + + prev_opt=$opt +done +if test -n "$store_arg_to" +then + echo "error: $prev_opt requires an argument" >&2 + exit 1 +fi + +if test -n "$valgrind_only" +then + test -z "$valgrind" && valgrind=memcheck + test -z "$verbose" && verbose_only="$valgrind_only" +elif test -n "$valgrind" +then + test -z "$verbose_log" && verbose=t +fi + +if test -n "$stress" +then + verbose=t + trace=t + immediate=t +fi + +TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}" +TEST_NAME="$(basename "$0" .sh)" +TEST_RESULTS_DIR="$TEST_OUTPUT_DIRECTORY/test-results" +TEST_RESULTS_BASE="$TEST_RESULTS_DIR/$TEST_NAME$TEST_STRESS_JOB_SFX" +TRASH_DIRECTORY="trash directory.$TEST_NAME$TEST_STRESS_JOB_SFX" +test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" +case "$TRASH_DIRECTORY" in +/*) ;; # absolute path is good + *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; +esac + +# If --stress was passed, run this test repeatedly in several parallel loops. +if test "$GIT_TEST_STRESS_STARTED" = "done" +then + : # Don't stress test again. +elif test -n "$stress" +then + if test "$stress" != t + then + job_count=$stress + elif test -n "$GIT_TEST_STRESS_LOAD" + then + job_count="$GIT_TEST_STRESS_LOAD" + elif job_count=$(getconf _NPROCESSORS_ONLN 2>/dev/null) && + test -n "$job_count" + then + job_count=$((2 * $job_count)) + else + job_count=8 + fi + + mkdir -p "$TEST_RESULTS_DIR" + stressfail="$TEST_RESULTS_BASE.stress-failed" + rm -f "$stressfail" + + stress_exit=0 + trap ' + kill $job_pids 2>/dev/null + wait + stress_exit=1 + ' TERM INT HUP + + job_pids= + job_nr=0 + while test $job_nr -lt "$job_count" + do + ( + GIT_TEST_STRESS_STARTED=done + GIT_TEST_STRESS_JOB_NR=$job_nr + export GIT_TEST_STRESS_STARTED GIT_TEST_STRESS_JOB_NR + + trap ' + kill $test_pid 2>/dev/null + wait + exit 1 + ' TERM INT + + cnt=0 + while ! test -e "$stressfail" + do + $TEST_SHELL_PATH "$0" "$@" >"$TEST_RESULTS_BASE.stress-$job_nr.out" 2>&1 & + test_pid=$! + + if wait $test_pid + then + printf "OK %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + else + echo $GIT_TEST_STRESS_JOB_NR >>"$stressfail" + printf "FAIL %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + fi + cnt=$(($cnt + 1)) + done + ) & + job_pids="$job_pids $!" + job_nr=$(($job_nr + 1)) + done + + wait + + if test -f "$stressfail" + then + echo "Log(s) of failed test run(s):" + for failed_job_nr in $(sort -n "$stressfail") + do + echo "Contents of '$TEST_RESULTS_BASE.stress-$failed_job_nr.out':" + cat "$TEST_RESULTS_BASE.stress-$failed_job_nr.out" + done + rm -rf "$TRASH_DIRECTORY.stress-failed" + # Move the last one. + mv "$TRASH_DIRECTORY.stress-$failed_job_nr" "$TRASH_DIRECTORY.stress-failed" + fi + + exit $stress_exit +fi + # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*|*' -V '*|*' --verbose-log '*) - mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" - BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" +if test "$GIT_TEST_TEE_STARTED" = "done" +then + : # do not redirect again +elif test -n "$tee" +then + mkdir -p "$TEST_RESULTS_DIR" # Make this filename available to the sub-process in case it is using # --verbose-log. - GIT_TEST_TEE_OUTPUT_FILE=$BASE.out + GIT_TEST_TEE_OUTPUT_FILE=$TEST_RESULTS_BASE.out export GIT_TEST_TEE_OUTPUT_FILE # Truncate before calling "tee -a" to get rid of the results @@ -91,11 +299,38 @@ done,*) >"$GIT_TEST_TEE_OUTPUT_FILE" (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1; - echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" - test "$(cat "$BASE.exit")" = 0 + echo $? >"$TEST_RESULTS_BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" + test "$(cat "$TEST_RESULTS_BASE.exit")" = 0 exit - ;; -esac +fi + +if test -n "$trace" && test -n "$test_untraceable" +then + # '-x' tracing requested, but this test script can't be reliably + # traced, unless it is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). + # + # Perform this version check _after_ the test script was + # potentially re-executed with $TEST_SHELL_PATH for '--tee' or + # '--verbose-log', so the right shell is checked and the + # warning is issued only once. + if test -n "$BASH_VERSION" && eval ' + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + ' + then + : Executed by a Bash version supporting BASH_XTRACEFD. Good. + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + trace= + fi +fi +if test -n "$trace" && test -z "$verbose_log" +then + verbose=t +fi # For repeatability, reset the environment to known value. # TERM is sanitized below, after saving color control sequences. @@ -193,7 +428,7 @@ fi # Add libc MALLOC and MALLOC_PERTURB test # only if we are not executing the test with valgrind -if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null || +if test -n "$valgrind" || test -n "$TEST_NO_MALLOC_CHECK" then setup_malloc_check () { @@ -264,100 +499,6 @@ test "x$TERM" != "xdumb" && ( ) && color=t -while test "$#" -ne 0 -do - case "$1" in - -d|--d|--de|--deb|--debu|--debug) - debug=t; shift ;; - -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) - immediate=t; shift ;; - -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) - GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; - -r) - shift; test "$#" -ne 0 || { - echo 'error: -r requires an argument' >&2; - exit 1; - } - run_list=$1; shift ;; - --run=*) - run_list=${1#--*=}; shift ;; - -h|--h|--he|--hel|--help) - help=t; shift ;; - -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) - verbose=t; shift ;; - --verbose-only=*) - verbose_only=${1#--*=} - shift ;; - -q|--q|--qu|--qui|--quie|--quiet) - # Ignore --quiet under a TAP::Harness. Saying how many tests - # passed without the ok/not ok details is always an error. - test -z "$HARNESS_ACTIVE" && quiet=t; shift ;; - --with-dashes) - with_dashes=t; shift ;; - --no-color) - color=; shift ;; - --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) - valgrind=memcheck - shift ;; - --valgrind=*) - valgrind=${1#--*=} - shift ;; - --valgrind-only=*) - valgrind_only=${1#--*=} - shift ;; - --tee) - shift ;; # was handled already - --root=*) - root=${1#--*=} - shift ;; - --chain-lint) - GIT_TEST_CHAIN_LINT=1 - shift ;; - --no-chain-lint) - GIT_TEST_CHAIN_LINT=0 - shift ;; - -x) - # Some test scripts can't be reliably traced with '-x', - # unless the test is run with a Bash version supporting - # BASH_XTRACEFD (introduced in Bash v4.1). Check whether - # this test is marked as such, and ignore '-x' if it - # isn't executed with a suitable Bash version. - if test -z "$test_untraceable" || { - test -n "$BASH_VERSION" && { - test ${BASH_VERSINFO[0]} -gt 4 || { - test ${BASH_VERSINFO[0]} -eq 4 && - test ${BASH_VERSINFO[1]} -ge 1 - } - } - } - then - trace=t - else - echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" - fi - shift ;; - -V|--verbose-log) - verbose_log=t - shift ;; - *) - echo "error: unknown test option '$1'" >&2; exit 1 ;; - esac -done - -if test -n "$valgrind_only" -then - test -z "$valgrind" && valgrind=memcheck - test -z "$verbose" && verbose_only="$valgrind_only" -elif test -n "$valgrind" -then - test -z "$verbose_log" && verbose=t -fi - -if test -n "$trace" && test -z "$verbose_log" -then - verbose=t -fi - if test -n "$color" then # Save the color control sequences now rather than run tput @@ -476,7 +617,7 @@ die () { GIT_EXIT_OK= trap 'die' EXIT -trap 'exit $?' INT +trap 'exit $?' INT TERM HUP # The user-facing functions are loaded from a separate file so that # test_perf subshells can have them too @@ -486,11 +627,35 @@ trap 'exit $?' INT # the test_expect_* functions instead. test_ok_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$*" + fi test_success=$(($test_success + 1)) say_color "" "ok $test_count - $@" } test_failure_ () { + if test -n "$write_junit_xml" + then + junit_insert="<failure message=\"not ok $test_count -" + junit_insert="$junit_insert $(xml_attr_encode "$1")\">" + junit_insert="$junit_insert $(xml_attr_encode \ + "$(if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + test-tool path-utils skip-n-bytes \ + "$GIT_TEST_TEE_OUTPUT_FILE" $GIT_TEST_TEE_OFFSET + else + printf '%s\n' "$@" | sed 1d + fi)")" + junit_insert="$junit_insert</failure>" + if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + junit_insert="$junit_insert<system-err>$(xml_attr_encode \ + "$(cat "$GIT_TEST_TEE_OUTPUT_FILE")")</system-err>" + fi + write_junit_xml_testcase "$1" " $junit_insert" + fi test_failure=$(($test_failure + 1)) say_color error "not ok $test_count - $1" shift @@ -499,11 +664,19 @@ test_failure_ () { } test_known_broken_ok_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$* (breakage fixed)" + fi test_fixed=$(($test_fixed+1)) say_color error "ok $test_count - $@ # TODO known breakage vanished" } test_known_broken_failure_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$* (known breakage)" + fi test_broken=$(($test_broken+1)) say_color warn "not ok $test_count - $@ # TODO known breakage" } @@ -761,12 +934,21 @@ test_start_ () { test_count=$(($test_count+1)) maybe_setup_verbose maybe_setup_valgrind + if test -n "$write_junit_xml" + then + junit_start=$(test-tool date getnanos) + fi } test_finish_ () { echo >&3 "" maybe_teardown_valgrind maybe_teardown_verbose + if test -n "$GIT_TEST_TEE_OFFSET" + then + GIT_TEST_TEE_OFFSET=$(test-tool path-utils file-size \ + "$GIT_TEST_TEE_OUTPUT_FILE") + fi } test_skip () { @@ -798,6 +980,13 @@ test_skip () { case "$to_skip" in t) + if test -n "$write_junit_xml" + then + message="$(xml_attr_encode "$skipped_reason")" + write_junit_xml_testcase "$1" \ + " <skipped message=\"$message\" />" + fi + say_color skip >&3 "skipping test: $@" say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true @@ -813,17 +1002,56 @@ test_at_end_hook_ () { : } +write_junit_xml () { + case "$1" in + --truncate) + >"$junit_xml_path" + junit_have_testcase= + shift + ;; + esac + printf '%s\n' "$@" >>"$junit_xml_path" +} + +xml_attr_encode () { + printf '%s\n' "$@" | test-tool xml-encode +} + +write_junit_xml_testcase () { + junit_attrs="name=\"$(xml_attr_encode "$this_test.$test_count $1")\"" + shift + junit_attrs="$junit_attrs classname=\"$this_test\"" + junit_attrs="$junit_attrs time=\"$(test-tool \ + date getnanos $junit_start)\"" + write_junit_xml "$(printf '%s\n' \ + " <testcase $junit_attrs>" "$@" " </testcase>")" + junit_have_testcase=t +} + test_done () { GIT_EXIT_OK=t + if test -n "$write_junit_xml" && test -n "$junit_xml_path" + then + test -n "$junit_have_testcase" || { + junit_start=$(test-tool date getnanos) + write_junit_xml_testcase "all tests skipped" + } + + # adjust the overall time + junit_time=$(test-tool date getnanos $junit_suite_start) + sed "s/<testsuite [^>]*/& time=\"$junit_time\"/" \ + <"$junit_xml_path" >"$junit_xml_path.new" + mv "$junit_xml_path.new" "$junit_xml_path" + + write_junit_xml " </testsuite>" "</testsuites>" + fi + if test -z "$HARNESS_ACTIVE" then - test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results" - mkdir -p "$test_results_dir" - base=${0##*/} - test_results_path="$test_results_dir/${base%.sh}.counts" + mkdir -p "$TEST_RESULTS_DIR" - cat >"$test_results_path" <<-EOF + cat >"$TEST_RESULTS_BASE.counts" <<-EOF total $test_count success $test_success fixed $test_fixed @@ -878,7 +1106,11 @@ test_done () { error "Tests passed but trash directory already removed before test cleanup; aborting" cd "$TRASH_DIRECTORY/.." && - rm -fr "$TRASH_DIRECTORY" || + rm -fr "$TRASH_DIRECTORY" || { + # try again in a bit + sleep 5; + rm -fr "$TRASH_DIRECTORY" + } || error "Tests passed but test cleanup failed; aborting" fi test_at_end_hook_ @@ -984,20 +1216,25 @@ then PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} else # normal case, use ../bin-wrappers only unless $with_dashes: - git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" - if ! test -x "$git_bin_dir/git" + if test -n "$no_bin_wrappers" then - if test -z "$with_dashes" + with_dashes=t + else + git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" + if ! test -x "$git_bin_dir/git" then - say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" + if test -z "$with_dashes" + then + say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" + fi + with_dashes=t fi - with_dashes=t + PATH="$git_bin_dir:$PATH" fi - PATH="$git_bin_dir:$PATH" GIT_EXEC_PATH=$GIT_BUILD_DIR if test -n "$with_dashes" then - PATH="$GIT_BUILD_DIR:$PATH" + PATH="$GIT_BUILD_DIR:$GIT_BUILD_DIR/t/helper:$PATH" fi fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt @@ -1021,7 +1258,7 @@ test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool$X then echo >&2 'You need to build test-tool:' echo >&2 'Run "make t/helper/test-tool" in the source (toplevel) directory' @@ -1029,12 +1266,6 @@ then fi # Test repository -TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)" -test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" -case "$TRASH_DIRECTORY" in -/*) ;; # absolute path is good - *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; -esac rm -fr "$TRASH_DIRECTORY" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" @@ -1051,6 +1282,7 @@ then else mkdir -p "$TRASH_DIRECTORY" fi + # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). cd -P "$TRASH_DIRECTORY" || exit 1 @@ -1064,6 +1296,23 @@ then test_done fi +if test -n "$write_junit_xml" +then + junit_xml_dir="$TEST_OUTPUT_DIRECTORY/out" + mkdir -p "$junit_xml_dir" + junit_xml_base=${0##*/} + junit_xml_path="$junit_xml_dir/TEST-${junit_xml_base%.sh}.xml" + junit_attrs="name=\"${junit_xml_base%.sh}\"" + junit_attrs="$junit_attrs timestamp=\"$(TZ=UTC \ + date +%Y-%m-%dT%H:%M:%S)\"" + write_junit_xml --truncate "<testsuites>" " <testsuite $junit_attrs>" + junit_suite_start=$(test-tool date getnanos) + if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + GIT_TEST_TEE_OFFSET=0 + fi +fi + # Provide an implementation of the 'yes' utility yes () { if test $# = 0 |