diff options
Diffstat (limited to 't')
52 files changed, 2314 insertions, 91 deletions
@@ -307,6 +307,25 @@ Don't: Use test_done instead if you need to stop the tests early (see "Skipping tests" below). + - use '! git cmd' when you want to make sure the git command exits + with failure in a controlled way by calling "die()". Instead, + use 'test_must_fail git cmd'. This will signal a failure if git + dies in an unexpected way (e.g. segfault). + + - use perl without spelling it as "$PERL_PATH". This is to help our + friends on Windows where the platform Perl often adds CR before + the end of line, and they bundle Git with a version of Perl that + does not do so, whose path is specified with $PERL_PATH. + + - use sh without spelling it as "$SHELL_PATH", when the script can + be misinterpreted by broken platform shell (e.g. Solaris). + + - chdir around in tests. It is not sufficient to chdir to + somewhere and then chdir back to the original location later in + the test, as any intermediate step can fail and abort the test, + causing the next test to start in an unexpected directory. Do so + inside a subshell if necessary. + - Break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP @@ -342,9 +361,9 @@ If you need to skip tests you should do so by using the three-arg form of the test_* functions (see the "Test harness library" section below), e.g.: - test_expect_success PERL 'I need Perl' " - '$PERL_PATH' -e 'hlagh() if unf_unf()' - " + test_expect_success PERL 'I need Perl' ' + "$PERL_PATH" -e "hlagh() if unf_unf()" + ' The advantage of skipping tests like this is that platforms that don't have the PERL and other optional dependencies get an indication of how diff --git a/t/lib-bash.sh b/t/lib-bash.sh new file mode 100644 index 0000000..11397f7 --- /dev/null +++ b/t/lib-bash.sh @@ -0,0 +1,18 @@ +#!/bin/sh +# +# Ensures that tests are run under Bash; primarily intended for running tests +# of the completion script. + +if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then + # we are in full-on bash mode + true +elif type bash >/dev/null 2>&1; then + # execute in full-on bash mode + unset POSIXLY_CORRECT + exec bash "$0" "$@" +else + echo '1..0 #SKIP skipping bash completion tests; bash not available' + exit 0 +fi + +. ./test-lib.sh diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 4a37cd7..957ae93 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -4,10 +4,20 @@ # stdout and stderr should be provided on stdin, # separated by "--". check() { + credential_opts= + credential_cmd=$1 + shift + for arg in "$@"; do + credential_opts="$credential_opts -c credential.helper='$arg'" + done read_chunk >stdin && read_chunk >expect-stdout && read_chunk >expect-stderr && - test-credential "$@" <stdin >stdout 2>stderr && + if ! eval "git $credential_opts credential $credential_cmd <stdin >stdout 2>stderr"; then + echo "git credential failed with code $?" && + cat stderr && + false + fi && test_cmp expect-stdout stdout && test_cmp expect-stderr stderr } @@ -41,7 +51,7 @@ reject() { echo protocol=$2 echo host=$3 echo username=$4 - ) | test-credential reject $1 + ) | git -c credential.helper=$1 credential reject } helper_test() { @@ -52,6 +62,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=askpass-username password=askpass-password -- @@ -74,6 +86,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=store-user password=store-pass -- @@ -85,6 +99,8 @@ helper_test() { protocol=http host=example.com -- + protocol=http + host=example.com username=askpass-username password=askpass-password -- @@ -98,6 +114,8 @@ helper_test() { protocol=https host=other.tld -- + protocol=https + host=other.tld username=askpass-username password=askpass-password -- @@ -112,6 +130,8 @@ helper_test() { host=example.com username=other -- + protocol=https + host=example.com username=other password=askpass-password -- @@ -133,6 +153,9 @@ helper_test() { host=path.tld path=bar.git -- + protocol=http + host=path.tld + path=bar.git username=askpass-username password=askpass-password -- @@ -150,6 +173,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=askpass-username password=askpass-password -- @@ -176,6 +201,8 @@ helper_test() { host=example.com username=user1 -- + protocol=https + host=example.com username=user1 password=pass1 EOF @@ -184,6 +211,8 @@ helper_test() { host=example.com username=user2 -- + protocol=https + host=example.com username=user2 password=pass2 EOF @@ -200,6 +229,8 @@ helper_test() { host=example.com username=user1 -- + protocol=https + host=example.com username=user1 password=askpass-password -- @@ -213,6 +244,8 @@ helper_test() { host=example.com username=user2 -- + protocol=https + host=example.com username=user2 password=pass2 EOF @@ -234,6 +267,8 @@ helper_test_timeout() { protocol=https host=timeout.tld -- + protocol=https + host=timeout.tld username=askpass-username password=askpass-password -- diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 20e28e3..538ea5f 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -82,6 +82,9 @@ test_expect_success 'credential_fill passes along metadata' ' host=example.com path=foo.git -- + protocol=ftp + host=example.com + path=foo.git username=one password=two -- @@ -213,6 +216,8 @@ test_expect_success 'match configured credential' ' host=example.com path=repo.git -- + protocol=https + host=example.com username=foo password=bar -- @@ -225,6 +230,8 @@ test_expect_success 'do not match configured credential' ' protocol=https host=bar -- + protocol=https + host=bar username=askpass-username password=askpass-password -- @@ -239,6 +246,8 @@ test_expect_success 'pull username from config' ' protocol=https host=example.com -- + protocol=https + host=example.com username=foo password=askpass-password -- @@ -252,6 +261,8 @@ test_expect_success 'http paths can be part of context' ' host=example.com path=foo.git -- + protocol=https + host=example.com username=foo password=bar -- @@ -265,6 +276,9 @@ test_expect_success 'http paths can be part of context' ' host=example.com path=foo.git -- + protocol=https + host=example.com + path=foo.git username=foo password=bar -- diff --git a/t/t1010-mktree.sh b/t/t1010-mktree.sh index b946f87..df573c4 100755 --- a/t/t1010-mktree.sh +++ b/t/t1010-mktree.sh @@ -42,13 +42,13 @@ test_expect_success 'ls-tree piped to mktree (2)' ' ' test_expect_success 'ls-tree output in wrong order given to mktree (1)' ' - perl -e "print reverse <>" <top | + "$PERL_PATH" -e "print reverse <>" <top | git mktree >actual && test_cmp tree actual ' test_expect_success 'ls-tree output in wrong order given to mktree (2)' ' - perl -e "print reverse <>" <top.withsub | + "$PERL_PATH" -e "print reverse <>" <top.withsub | git mktree >actual && test_cmp tree.withsub actual ' diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 55ed955..fd10528 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -130,10 +130,27 @@ test_expect_success 'git-show a large file' ' ' +test_expect_success 'index-pack' ' + git clone file://"`pwd`"/.git foo && + GIT_DIR=non-existent git index-pack --strict --verify foo/.git/objects/pack/*.pack +' + test_expect_success 'repack' ' git repack -ad ' +test_expect_success 'pack-objects with large loose object' ' + SHA1=`git hash-object huge` && + test_create_repo loose && + echo $SHA1 | git pack-objects --stdout | + GIT_ALLOC_LIMIT=0 GIT_DIR=loose/.git git unpack-objects && + echo $SHA1 | GIT_DIR=loose/.git git pack-objects pack && + test_create_repo packed && + mv pack-* packed/.git/objects/pack && + GIT_DIR=packed/.git git cat-file blob $SHA1 >actual && + cmp huge actual +' + test_expect_success 'tar achiving' ' git archive --format=tar HEAD >/dev/null ' diff --git a/t/t1304-default-acl.sh b/t/t1304-default-acl.sh index 2b962cf..79045ab 100755 --- a/t/t1304-default-acl.sh +++ b/t/t1304-default-acl.sh @@ -14,16 +14,15 @@ umask 077 # We need an arbitrary other user give permission to using ACLs. root # is a good candidate: exists on all unices, and it has permission # anyway, so we don't create a security hole running the testsuite. - -setfacl_out="$(setfacl -m u:root:rwx . 2>&1)" -setfacl_ret=$? - -if test $setfacl_ret != 0 -then - say "Unable to use setfacl (output: '$setfacl_out'; return code: '$setfacl_ret')" -else - test_set_prereq SETFACL -fi +test_expect_success 'checking for a working acl setup' ' + if setfacl -m d:m:rwx -m u:root:rwx . && + getfacl . | grep user:root:rwx && + touch should-have-readable-acl && + getfacl should-have-readable-acl | egrep "mask::?rw-" + then + test_set_prereq SETFACL + fi +' if test -z "$LOGNAME" then diff --git a/t/t1306-xdg-files.sh b/t/t1306-xdg-files.sh new file mode 100755 index 0000000..3c75c3f --- /dev/null +++ b/t/t1306-xdg-files.sh @@ -0,0 +1,158 @@ +#!/bin/sh +# +# Copyright (c) 2012 Valentin Duperray, Lucien Kong, Franck Jonas, +# Thomas Nguy, Khoi Nguyen +# Grenoble INP Ensimag +# + +test_description='Compatibility with $XDG_CONFIG_HOME/git/ files' + +. ./test-lib.sh + +test_expect_success 'read config: xdg file exists and ~/.gitconfig doesn'\''t' ' + mkdir -p .config/git && + echo "[alias]" >.config/git/config && + echo " myalias = !echo in_config" >>.config/git/config && + echo in_config >expected && + git myalias >actual && + test_cmp expected actual +' + + +test_expect_success 'read config: xdg file exists and ~/.gitconfig exists' ' + >.gitconfig && + echo "[alias]" >.gitconfig && + echo " myalias = !echo in_gitconfig" >>.gitconfig && + echo in_gitconfig >expected && + git myalias >actual && + test_cmp expected actual +' + + +test_expect_success 'read with --get: xdg file exists and ~/.gitconfig doesn'\''t' ' + rm .gitconfig && + echo "[user]" >.config/git/config && + echo " name = read_config" >>.config/git/config && + echo read_config >expected && + git config --get user.name >actual && + test_cmp expected actual +' + + +test_expect_success 'read with --get: xdg file exists and ~/.gitconfig exists' ' + >.gitconfig && + echo "[user]" >.gitconfig && + echo " name = read_gitconfig" >>.gitconfig && + echo read_gitconfig >expected && + git config --get user.name >actual && + test_cmp expected actual +' + + +test_expect_success 'read with --list: xdg file exists and ~/.gitconfig doesn'\''t' ' + rm .gitconfig && + echo user.name=read_config >expected && + git config --global --list >actual && + test_cmp expected actual +' + + +test_expect_success 'read with --list: xdg file exists and ~/.gitconfig exists' ' + >.gitconfig && + echo "[user]" >.gitconfig && + echo " name = read_gitconfig" >>.gitconfig && + echo user.name=read_gitconfig >expected && + git config --global --list >actual && + test_cmp expected actual +' + + +test_expect_success 'Setup' ' + git init git && + cd git && + echo foo >to_be_excluded +' + + +test_expect_success 'Exclusion of a file in the XDG ignore file' ' + mkdir -p "$HOME"/.config/git/ && + echo to_be_excluded >"$HOME"/.config/git/ignore && + test_must_fail git add to_be_excluded +' + + +test_expect_success 'Exclusion in both XDG and local ignore files' ' + echo to_be_excluded >.gitignore && + test_must_fail git add to_be_excluded +' + + +test_expect_success 'Exclusion in a non-XDG global ignore file' ' + rm .gitignore && + echo >"$HOME"/.config/git/ignore && + echo to_be_excluded >"$HOME"/my_gitignore && + git config core.excludesfile "$HOME"/my_gitignore && + test_must_fail git add to_be_excluded +' + + +test_expect_success 'Checking attributes in the XDG attributes file' ' + echo foo >f && + git check-attr -a f >actual && + test_line_count -eq 0 actual && + echo "f attr_f" >"$HOME"/.config/git/attributes && + echo "f: attr_f: set" >expected && + git check-attr -a f >actual && + test_cmp expected actual +' + + +test_expect_success 'Checking attributes in both XDG and local attributes files' ' + echo "f -attr_f" >.gitattributes && + echo "f: attr_f: unset" >expected && + git check-attr -a f >actual && + test_cmp expected actual +' + + +test_expect_success 'Checking attributes in a non-XDG global attributes file' ' + test_might_fail rm .gitattributes && + echo "f attr_f=test" >"$HOME"/my_gitattributes && + git config core.attributesfile "$HOME"/my_gitattributes && + echo "f: attr_f: test" >expected && + git check-attr -a f >actual && + test_cmp expected actual +' + + +test_expect_success 'write: xdg file exists and ~/.gitconfig doesn'\''t' ' + mkdir -p "$HOME"/.config/git && + >"$HOME"/.config/git/config && + test_might_fail rm "$HOME"/.gitconfig && + git config --global user.name "write_config" && + echo "[user]" >expected && + echo " name = write_config" >>expected && + test_cmp expected "$HOME"/.config/git/config +' + + +test_expect_success 'write: xdg file exists and ~/.gitconfig exists' ' + >"$HOME"/.gitconfig && + git config --global user.name "write_gitconfig" && + echo "[user]" >expected && + echo " name = write_gitconfig" >>expected && + test_cmp expected "$HOME"/.gitconfig +' + + +test_expect_success 'write: ~/.config/git/ exists and config file doesn'\''t' ' + test_might_fail rm "$HOME"/.gitconfig && + test_might_fail rm "$HOME"/.config/git/config && + git config --global user.name "write_gitconfig" && + echo "[user]" >expected && + echo " name = write_gitconfig" >>expected && + test_cmp expected "$HOME"/.gitconfig +' + + +test_done diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 0843a1c..c5cb77a 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -171,4 +171,15 @@ test_expect_success 'relative path when startup_info is NULL' ' grep "BUG: startup_info struct is not initialized." error ' +test_expect_success '<commit>:file correctly diagnosed after a pathname' ' + test_must_fail git rev-parse file.txt HEAD:file.txt 1>actual 2>error && + test_i18ngrep ! "exists on disk" error && + test_i18ngrep "no such path in the working tree" error && + cat >expect <<-\EOF && + file.txt + HEAD:file.txt + EOF + test_cmp expect actual +' + test_done diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh index 0e3b858..655f278 100755 --- a/t/t2017-checkout-orphan.sh +++ b/t/t2017-checkout-orphan.sh @@ -116,4 +116,10 @@ test_expect_success '--orphan refuses to switch if a merge is needed' ' git reset --hard ' +test_expect_success 'cannot --detach on an unborn branch' ' + git checkout master && + git checkout --orphan new && + test_must_fail git checkout --detach +' + test_done diff --git a/t/t3300-funny-names.sh b/t/t3300-funny-names.sh index c53c9f6..1f35e55 100755 --- a/t/t3300-funny-names.sh +++ b/t/t3300-funny-names.sh @@ -71,7 +71,7 @@ test_expect_success 'ls-files -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git ls-files -z >ls-files.z && - perl -pe "y/\000/\012/" <ls-files.z >current && + "$PERL_PATH" -pe "y/\000/\012/" <ls-files.z >current && test_cmp expected current ' @@ -108,7 +108,7 @@ test_expect_success 'diff-index -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git diff-index -z --name-status $t0 >diff-index.z && - perl -pe "y/\000/\012/" <diff-index.z >current && + "$PERL_PATH" -pe "y/\000/\012/" <diff-index.z >current && test_cmp expected current ' @@ -118,7 +118,7 @@ test_expect_success 'diff-tree -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git diff-tree -z --name-status $t0 $t1 >diff-tree.z && - perl -pe y/\\000/\\012/ <diff-tree.z >current && + "$PERL_PATH" -pe y/\\000/\\012/ <diff-tree.z >current && test_cmp expected current ' diff --git a/t/t3401-rebase-partial.sh b/t/t3401-rebase-partial.sh index 7ba1797..7f8693b 100755 --- a/t/t3401-rebase-partial.sh +++ b/t/t3401-rebase-partial.sh @@ -42,4 +42,12 @@ test_expect_success 'rebase --merge topic branch that was partially merged upstr test_path_is_missing .git/rebase-merge ' +test_expect_success 'rebase ignores empty commit' ' + git reset --hard A && + git commit --allow-empty -m empty && + test_commit D && + git rebase C && + test $(git log --format=%s C..) = "D" +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 025c1c6..68d6148 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -755,4 +755,121 @@ test_expect_success 'rebase-i history with funny messages' ' test_cmp expect actual ' + +test_expect_success 'prepare for rebase -i --exec' ' + git checkout master && + git checkout -b execute && + test_commit one_exec main.txt one_exec && + test_commit two_exec main.txt two_exec && + test_commit three_exec main.txt three_exec +' + + +test_expect_success 'running "git rebase -i --exec git show HEAD"' ' + git rebase -i --exec "git show HEAD" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'running "git rebase --exec git show HEAD -i"' ' + git reset --hard execute && + git rebase --exec "git show HEAD" -i HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'running "git rebase -ix git show HEAD"' ' + git reset --hard execute && + git rebase -ix "git show HEAD" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with several <CMD>' ' + git reset --hard execute && + git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with several instances of --exec' ' + git reset --hard execute && + git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2 + exec_git_show_HEAD exec_pwd" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,11d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with --autosquash' ' + git reset --hard execute && + git checkout -b autosquash && + echo second >second.txt && + git add second.txt && + git commit -m "fixup! two_exec" && + echo bis >bis.txt && + git add bis.txt && + git commit -m "fixup! two_exec" && + ( + git checkout -b autosquash_actual && + git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual + ) && + git checkout autosquash && + ( + git checkout -b autosquash_expected && + FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~4 >expect + ) && + sed -e "1,13d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase --exec without -i shows error message' ' + git reset --hard execute && + test_must_fail git rebase --exec "git show HEAD" HEAD~2 2>actual && + echo "--exec option must be used with --interactive option" >expected && + test_i18ncmp expected actual +' + + +test_expect_success 'rebase -i --exec without <CMD>' ' + git reset --hard execute && + test_must_fail git rebase -i --exec 2>tmp && + sed -e "1d" tmp >actual && + test_must_fail git rebase -h >expected && + test_cmp expected actual && + git checkout master +' + test_done diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index e5ad67c..19eddad 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='rebase should not insist on git message convention' +test_description='rebase should handle arbitrary git message' . ./test-lib.sh @@ -12,6 +12,11 @@ It has two paragraphs, but its first paragraph is not friendly to oneline summary format. EOF +cat >G <<\EOF +commit log message containing a diff +EOF + + test_expect_success setup ' >file1 && @@ -19,8 +24,9 @@ test_expect_success setup ' git add file1 file2 && test_tick && git commit -m "Initial commit" && + git branch diff-in-message - git checkout -b side && + git checkout -b multi-line-subject && cat F >file2 && git add file2 && test_tick && @@ -28,6 +34,17 @@ test_expect_success setup ' git cat-file commit HEAD | sed -e "1,/^\$/d" >F0 && + git checkout diff-in-message && + echo "commit log message containing a diff" >G && + echo "" >>G + cat G >file2 && + git add file2 && + git diff --cached >>G && + test_tick && + git commit -F G && + + git cat-file commit HEAD | sed -e "1,/^\$/d" >G0 && + git checkout master && echo One >file1 && @@ -36,13 +53,20 @@ test_expect_success setup ' git commit -m "Second commit" ' -test_expect_success rebase ' +test_expect_success 'rebase commit with multi-line subject' ' - git rebase master side && + git rebase master multi-line-subject && git cat-file commit HEAD | sed -e "1,/^\$/d" >F1 && test_cmp F0 F1 && test_cmp F F0 ' +test_expect_success 'rebase commit with diff in message' ' + git rebase master diff-in-message && + git cat-file commit HEAD | sed -e "1,/^$/d" >G1 && + test_cmp G0 G1 && + test_cmp G G0 +' + test_done diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 086c91c..1e9d1a7 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -23,9 +23,15 @@ test_expect_success 'prepare repository' ' ' test_expect_success 'rebase --root expects --onto' ' + git checkout -B fail other && test_must_fail git rebase --root ' +test_expect_success 'rebase --root fails with too many args' ' + git checkout -B fail other && + test_must_fail git rebase --onto master --root fail fail +' + test_expect_success 'setup pre-rebase hook' ' mkdir -p .git/hooks && cat >.git/hooks/pre-rebase <<EOF && @@ -42,7 +48,7 @@ cat > expect <<EOF EOF test_expect_success 'rebase --root --onto <newbase>' ' - git checkout -b work && + git checkout -b work other && git rebase --root --onto master && git log --pretty=tformat:"%s" > rebased && test_cmp expect rebased diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh new file mode 100755 index 0000000..88b7a20 --- /dev/null +++ b/t/t3910-mac-os-precompose.sh @@ -0,0 +1,164 @@ +#!/bin/sh +# +# Copyright (c) 2012 Torsten Bögershausen +# + +test_description='utf-8 decomposed (nfd) converted to precomposed (nfc)' + +. ./test-lib.sh + +Adiarnfc=`printf '\303\204'` +Adiarnfd=`printf 'A\314\210'` + +# check if the feature is compiled in +mkdir junk && +>junk/"$Adiarnfc" && +case "$(cd junk && echo *)" in + "$Adiarnfd") + test_nfd=1 + ;; + *) ;; +esac +rm -rf junk + + +if test "$test_nfd" +then + # create more utf-8 variables + Odiarnfc=`printf '\303\226'` + Odiarnfd=`printf 'O\314\210'` + AEligatu=`printf '\303\206'` + Invalidu=`printf '\303\377'` + + + #Create a string with 255 bytes (decomposed) + Alongd=$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd #21 Byte + Alongd=$Alongd$Alongd$Alongd #63 Byte + Alongd=$Alongd$Alongd$Alongd$Alongd$Adiarnfd #255 Byte + + #Create a string with 254 bytes (precomposed) + Alongc=$AEligatu$AEligatu$AEligatu$AEligatu$AEligatu #10 Byte + Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #50 Byte + Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #250 Byte + Alongc=$Alongc$AEligatu$AEligatu #254 Byte + + test_expect_success "detect if nfd needed" ' + precomposeunicode=`git config core.precomposeunicode` && + test "$precomposeunicode" = false && + git config core.precomposeunicode true + ' + test_expect_success "setup" ' + >x && + git add x && + git commit -m "1st commit" && + git rm x && + git commit -m "rm x" + ' + test_expect_success "setup case mac" ' + git checkout -b mac_os + ' + # This will test nfd2nfc in readdir() + test_expect_success "add file Adiarnfc" ' + echo f.Adiarnfc >f.$Adiarnfc && + git add f.$Adiarnfc && + git commit -m "add f.$Adiarnfc" + ' + # This will test nfd2nfc in git stage() + test_expect_success "stage file d.Adiarnfd/f.Adiarnfd" ' + mkdir d.$Adiarnfd && + echo d.$Adiarnfd/f.$Adiarnfd >d.$Adiarnfd/f.$Adiarnfd && + git stage d.$Adiarnfd/f.$Adiarnfd && + git commit -m "add d.$Adiarnfd/f.$Adiarnfd" + ' + test_expect_success "add link Adiarnfc" ' + ln -s d.$Adiarnfd/f.$Adiarnfd l.$Adiarnfc && + git add l.$Adiarnfc && + git commit -m "add l.Adiarnfc" + ' + # This will test git log + test_expect_success "git log f.Adiar" ' + git log f.$Adiarnfc > f.Adiarnfc.log && + git log f.$Adiarnfd > f.Adiarnfd.log && + test -s f.Adiarnfc.log && + test -s f.Adiarnfd.log && + test_cmp f.Adiarnfc.log f.Adiarnfd.log && + rm f.Adiarnfc.log f.Adiarnfd.log + ' + # This will test git ls-files + test_expect_success "git lsfiles f.Adiar" ' + git ls-files f.$Adiarnfc > f.Adiarnfc.log && + git ls-files f.$Adiarnfd > f.Adiarnfd.log && + test -s f.Adiarnfc.log && + test -s f.Adiarnfd.log && + test_cmp f.Adiarnfc.log f.Adiarnfd.log && + rm f.Adiarnfc.log f.Adiarnfd.log + ' + # This will test git mv + test_expect_success "git mv" ' + git mv f.$Adiarnfd f.$Odiarnfc && + git mv d.$Adiarnfd d.$Odiarnfc && + git mv l.$Adiarnfd l.$Odiarnfc && + git commit -m "mv Adiarnfd Odiarnfc" + ' + # Files can be checked out as nfc + # And the link has been corrected from nfd to nfc + test_expect_success "git checkout nfc" ' + rm f.$Odiarnfc && + git checkout f.$Odiarnfc + ' + # Make it possible to checkout files with their NFD names + test_expect_success "git checkout file nfd" ' + rm -f f.* && + git checkout f.$Odiarnfd + ' + # Make it possible to checkout links with their NFD names + test_expect_success "git checkout link nfd" ' + rm l.* && + git checkout l.$Odiarnfd + ' + test_expect_success "setup case mac2" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_2 + ' + # This will test nfd2nfc in git commit + test_expect_success "commit file d2.Adiarnfd/f.Adiarnfd" ' + mkdir d2.$Adiarnfd && + echo d2.$Adiarnfd/f.$Adiarnfd >d2.$Adiarnfd/f.$Adiarnfd && + git add d2.$Adiarnfd/f.$Adiarnfd && + git commit -m "add d2.$Adiarnfd/f.$Adiarnfd" -- d2.$Adiarnfd/f.$Adiarnfd + ' + test_expect_success "setup for long decomposed filename" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_long_nfd_fn + ' + test_expect_success "Add long decomposed filename" ' + echo longd >$Alongd && + git add * && + git commit -m "Long filename" + ' + test_expect_success "setup for long precomposed filename" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_long_nfc_fn + ' + test_expect_success "Add long precomposed filename" ' + echo longc >$Alongc && + git add * && + git commit -m "Long filename" + ' + # Test if the global core.precomposeunicode stops autosensing + # Must be the last test case + test_expect_success "respect git config --global core.precomposeunicode" ' + git config --global core.precomposeunicode true && + rm -rf .git && + git init && + precomposeunicode=`git config core.precomposeunicode` && + test "$precomposeunicode" = "true" + ' +else + say "Skipping nfc/nfd tests" +fi + +test_done diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b473b6d..959aa26 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -243,7 +243,7 @@ check_threading () { (git format-patch --stdout "$@"; echo $? > status.out) | # Prints everything between the Message-ID and In-Reply-To, # and replaces all Message-ID-lookalikes by a sequence number - perl -ne ' + "$PERL_PATH" -ne ' if (/^(message-id|references|in-reply-to)/i) { $printing = 1; } elsif (/^\S/) { diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index 083f62d..533afc1 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -118,7 +118,7 @@ test_expect_success 'no diff with -diff' ' git diff | grep Binary ' -echo NULZbetweenZwords | perl -pe 'y/Z/\000/' > file +echo NULZbetweenZwords | "$PERL_PATH" -pe 'y/Z/\000/' > file test_expect_success 'force diff with "diff"' ' echo >.gitattributes "file diff" && diff --git a/t/t4029-diff-trailing-space.sh b/t/t4029-diff-trailing-space.sh index 3ccc237..36e2f07 100755 --- a/t/t4029-diff-trailing-space.sh +++ b/t/t4029-diff-trailing-space.sh @@ -27,7 +27,7 @@ test_expect_success \ git config --bool diff.suppressBlankEmpty true && git diff f > actual && test_cmp exp actual && - perl -i.bak -p -e "s/^\$/ /" exp && + "$PERL_PATH" -i.bak -p -e "s/^\$/ /" exp && git config --bool diff.suppressBlankEmpty false && git diff f > actual && test_cmp exp actual && diff --git a/t/t4030-diff-textconv.sh b/t/t4030-diff-textconv.sh index d4ab4f2..eebb1ee 100755 --- a/t/t4030-diff-textconv.sh +++ b/t/t4030-diff-textconv.sh @@ -21,7 +21,7 @@ EOF cat >hexdump <<'EOF' #!/bin/sh -perl -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" +"$PERL_PATH" -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" EOF chmod +x hexdump diff --git a/t/t4031-diff-rewrite-binary.sh b/t/t4031-diff-rewrite-binary.sh index c8296fa..eacc669 100755 --- a/t/t4031-diff-rewrite-binary.sh +++ b/t/t4031-diff-rewrite-binary.sh @@ -60,7 +60,7 @@ test_expect_success 'diff --stat counts binary rewrite as 0 lines' ' { echo "#!$SHELL_PATH" cat <<'EOF' -perl -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" +"$PERL_PATH" -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" EOF } >dump chmod +x dump diff --git a/t/t4035-diff-quiet.sh b/t/t4035-diff-quiet.sh index cdb9202..231412d 100755 --- a/t/t4035-diff-quiet.sh +++ b/t/t4035-diff-quiet.sh @@ -10,7 +10,22 @@ test_expect_success 'setup' ' git commit -m first && echo 2 >b && git add . && - git commit -a -m second + git commit -a -m second && + mkdir -p test-outside/repo && ( + cd test-outside/repo && + git init && + echo "1 1" >a && + git add . && + git commit -m 1 + ) && + mkdir -p test-outside/non/git && ( + cd test-outside/non/git && + echo "1 1" >a && + echo "1 1" >matching-file && + echo "1 1 " >trailing-space && + echo "1 1" >extra-space && + echo "2" >never-match + ) ' test_expect_success 'git diff-tree HEAD^ HEAD' ' @@ -77,4 +92,60 @@ test_expect_success 'git diff-index --cached HEAD' ' } ' +test_expect_success 'git diff, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet a ../non/git/matching-file && + test_expect_code 1 git diff --quiet a ../non/git/extra-space + ) +' + +test_expect_success 'git diff, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet a matching-file && + test_expect_code 1 git diff --quiet a extra-space + ) +' + +test_expect_success 'git diff --ignore-space-at-eol, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet --ignore-space-at-eol a ../non/git/trailing-space && + test_expect_code 1 git diff --quiet --ignore-space-at-eol a ../non/git/extra-space + ) +' + +test_expect_success 'git diff --ignore-space-at-eol, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet --ignore-space-at-eol a trailing-space && + test_expect_code 1 git diff --quiet --ignore-space-at-eol a extra-space + ) +' + +test_expect_success 'git diff --ignore-all-space, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet --ignore-all-space a ../non/git/trailing-space && + test_expect_code 0 git diff --quiet --ignore-all-space a ../non/git/extra-space && + test_expect_code 1 git diff --quiet --ignore-all-space a ../non/git/never-match + ) +' + +test_expect_success 'git diff --ignore-all-space, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet --ignore-all-space a trailing-space && + test_expect_code 0 git diff --quiet --ignore-all-space a extra-space && + test_expect_code 1 git diff --quiet --ignore-all-space a never-match + ) +' + test_done diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 4dc8c67..979e983 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -8,7 +8,12 @@ test_expect_success 'setup' ' mkdir a && mkdir b && echo 1 >a/1 && - echo 2 >a/2 + echo 2 >a/2 && + git init repo && + echo 1 >repo/a && + mkdir -p non/git && + echo 1 >non/git/a && + echo 1 >non/git/b ' test_expect_success 'git diff --no-index directories' ' @@ -16,4 +21,12 @@ test_expect_success 'git diff --no-index directories' ' test $? = 1 && test_line_count = 14 cnt ' +test_expect_success 'git diff --no-index relative path outside repo' ' + ( + cd repo && + test_expect_code 0 git diff --no-index a ../non/git/a && + test_expect_code 0 git diff --no-index ../non/git/a ../non/git/b + ) +' + test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index dbbf56c..99627bc 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -25,10 +25,10 @@ test_expect_success 'setup' " git commit -m 'Initial Version' 2>/dev/null && git checkout -b binary && - perl -pe 'y/x/\000/' <file1 >file3 && + "$PERL_PATH" -pe 'y/x/\000/' <file1 >file3 && cat file3 >file4 && git add file2 && - perl -pe 'y/\000/v/' <file3 >file1 && + "$PERL_PATH" -pe 'y/\000/v/' <file3 >file1 && rm -f file2 && git update-index --add --remove file1 file2 file3 file4 && git commit -m 'Second Version' && diff --git a/t/t4116-apply-reverse.sh b/t/t4116-apply-reverse.sh index 2298ece..fca8153 100755 --- a/t/t4116-apply-reverse.sh +++ b/t/t4116-apply-reverse.sh @@ -12,14 +12,14 @@ test_description='git apply in reverse test_expect_success setup ' for i in a b c d e f g h i j k l m n; do echo $i; done >file1 && - perl -pe "y/ijk/\\000\\001\\002/" <file1 >file2 && + "$PERL_PATH" -pe "y/ijk/\\000\\001\\002/" <file1 >file2 && git add file1 file2 && git commit -m initial && git tag initial && for i in a b c g h i J K L m o n p q; do echo $i; done >file1 && - perl -pe "y/mon/\\000\\001\\002/" <file1 >file2 && + "$PERL_PATH" -pe "y/mon/\\000\\001\\002/" <file1 >file2 && git commit -a -m second && git tag second && diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index 36255d6..3ab670d 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -78,7 +78,7 @@ test_expect_success 'activate rerere, old style (conflicting merge)' ' test_might_fail git config --unset rerere.enabled && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 && grep "^=======\$" $rr/preimage && ! test -f $rr/postimage && @@ -91,7 +91,7 @@ test_expect_success 'rerere.enabled works, too' ' git reset --hard && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 && grep ^=======$ $rr/preimage ' @@ -101,7 +101,7 @@ test_expect_success 'set up rr-cache' ' git config rerere.enabled true && git reset --hard && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 ' @@ -185,7 +185,7 @@ test_expect_success 'rerere updates postimage timestamp' ' test_expect_success 'rerere clear' ' rm $rr/postimage && - echo "$sha1 a1" | perl -pe "y/\012/\000/" >.git/MERGE_RR && + echo "$sha1 a1" | "$PERL_PATH" -pe "y/\012/\000/" >.git/MERGE_RR && git rerere clear && ! test -d $rr ' diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index d9d856b..2e52f8b 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -13,9 +13,9 @@ TRASH=`pwd` test_expect_success \ 'setup' \ 'rm -f .git/index* && - perl -e "print \"a\" x 4096;" > a && - perl -e "print \"b\" x 4096;" > b && - perl -e "print \"c\" x 4096;" > c && + "$PERL_PATH" -e "print \"a\" x 4096;" > a && + "$PERL_PATH" -e "print \"b\" x 4096;" > b && + "$PERL_PATH" -e "print \"c\" x 4096;" > c && test-genrandom "seed a" 2097152 > a_big && test-genrandom "seed b" 2097152 > b_big && git update-index --add a a_big b b_big c && @@ -129,7 +129,7 @@ test_expect_success \ cd "$TRASH" test_expect_success 'compare delta flavors' ' - perl -e '\'' + "$PERL_PATH" -e '\'' defined($_ = -s $_) or die for @ARGV; exit 1 if $ARGV[0] <= $ARGV[1]; '\'' test-2-$packname_2.pack test-3-$packname_3.pack @@ -418,4 +418,9 @@ test_expect_success \ 'test_must_fail git index-pack -o bad.idx test-3.pack 2>msg && grep "SHA1 COLLISION FOUND" msg' +test_expect_success \ + 'make sure index-pack detects the SHA1 collision (large blobs)' \ + 'test_must_fail git -c core.bigfilethreshold=1 index-pack -o bad.idx test-3.pack 2>msg && + grep "SHA1 COLLISION FOUND" msg' + test_done diff --git a/t/t5303-pack-corruption-resilience.sh b/t/t5303-pack-corruption-resilience.sh index 5f6cd4f..5b1250f 100755 --- a/t/t5303-pack-corruption-resilience.sh +++ b/t/t5303-pack-corruption-resilience.sh @@ -98,7 +98,7 @@ test_expect_success \ 'create_new_pack && git prune-packed && chmod +w ${pack}.pack && - perl -i.bak -pe "s/ base /abcdef/" ${pack}.pack && + "$PERL_PATH" -i.bak -pe "s/ base /abcdef/" ${pack}.pack && test_must_fail git cat-file blob $blob_1 > /dev/null && test_must_fail git cat-file blob $blob_2 > /dev/null && test_must_fail git cat-file blob $blob_3 > /dev/null' @@ -155,7 +155,7 @@ test_expect_success \ 'create_new_pack && git prune-packed && chmod +w ${pack}.pack && - perl -i.bak -pe "s/ delta1 /abcdefgh/" ${pack}.pack && + "$PERL_PATH" -i.bak -pe "s/ delta1 /abcdefgh/" ${pack}.pack && git cat-file blob $blob_1 > /dev/null && test_must_fail git cat-file blob $blob_2 > /dev/null && test_must_fail git cat-file blob $blob_3 > /dev/null' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 1d1ca98..e80a2af 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -125,6 +125,11 @@ test_expect_success 'single branch object count' ' test_cmp expected count.singlebranch ' +test_expect_success 'single given branch clone' ' + git clone --single-branch --branch A "file://$(pwd)/." branch-a && + test_must_fail git --git-dir=branch-a/.git rev-parse origin/B +' + test_expect_success 'clone shallow' ' git clone --no-single-branch --depth 2 "file://$(pwd)/." shallow ' @@ -276,7 +281,7 @@ test_expect_success 'clone shallow with --branch' ' ' test_expect_success 'clone shallow object count' ' - echo "in-pack: 12" > count3.expected && + echo "in-pack: 6" > count3.expected && GIT_DIR=shallow3/.git git count-objects -v | grep "^in-pack" > count3.actual && test_cmp count3.expected count3.actual diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 6764d51..d16e5d3 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -87,17 +87,15 @@ test_expect_success 'use branch.<name>.remote if possible' ' test_expect_success 'confuses pattern as remote when no remote specified' ' cat >exp <<-\EOF && fatal: '\''refs*master'\'' does not appear to be a git repository - fatal: The remote end hung up unexpectedly + fatal: Could not read from remote repository. + + Please make sure you have the correct access rights + and the repository exists. EOF # - # Do not expect "git ls-remote <pattern>" to work; ls-remote, correctly, - # confuses <pattern> for <remote>. Although ugly, this behaviour is akin - # to the confusion of refspecs for remotes by git-fetch and git-push, - # eg: - # - # $ git fetch branch - # - + # Do not expect "git ls-remote <pattern>" to work; ls-remote needs + # <remote> if you want to feed <pattern>, just like you cannot say + # fetch <branch>. # We could just as easily have used "master"; the "*" emphasizes its # role as a pattern. test_must_fail git ls-remote refs*master >actual 2>&1 && diff --git a/t/t5532-fetch-proxy.sh b/t/t5532-fetch-proxy.sh index 62f2460..5531bd1 100755 --- a/t/t5532-fetch-proxy.sh +++ b/t/t5532-fetch-proxy.sh @@ -15,7 +15,7 @@ test_expect_success 'setup remote repo' ' cat >proxy <<'EOF' #!/bin/sh echo >&2 "proxying for $*" -cmd=`perl -e ' +cmd=`"$PERL_PATH" -e ' read(STDIN, $buf, 4); my $n = hex($buf) - 4; read(STDIN, $buf, $n); diff --git a/t/t5551-http-fetch.sh b/t/t5551-http-fetch.sh index be6094b..fadf2f2 100755 --- a/t/t5551-http-fetch.sh +++ b/t/t5551-http-fetch.sh @@ -130,7 +130,7 @@ test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' done | git fast-import --export-marks=marks && # now assign tags to all the dangling commits we created above - tag=$(perl -e "print \"bla\" x 30") && + tag=$("$PERL_PATH" -e "print \"bla\" x 30") && sed -e "s/^:\(.\+\) \(.\+\)$/\2 refs\/tags\/$tag-\1/" <marks >>packed-refs ) ' diff --git a/t/t5701-clone-local.sh b/t/t5701-clone-local.sh index c6feca4..7ff6e0e 100755 --- a/t/t5701-clone-local.sh +++ b/t/t5701-clone-local.sh @@ -124,4 +124,14 @@ test_expect_success 'cloning non-git directory fails' ' test_must_fail git clone not-a-git-repo not-a-git-repo-clone ' +test_expect_success 'cloning file:// does not hardlink' ' + git clone --bare file://"$(pwd)"/a non-local && + ! repo_is_hardlinked non-local +' + +test_expect_success 'cloning a local path with --no-local does not hardlink' ' + git clone --bare --no-local a force-nonlocal && + ! repo_is_hardlinked force-nonlocal +' + test_done diff --git a/t/t6011-rev-list-with-bad-commit.sh b/t/t6011-rev-list-with-bad-commit.sh index e51eb41..bbb0581 100755 --- a/t/t6011-rev-list-with-bad-commit.sh +++ b/t/t6011-rev-list-with-bad-commit.sh @@ -37,7 +37,7 @@ test_expect_success 'verify number of revisions' \ test_expect_success 'corrupt second commit object' \ ' - perl -i.bak -pe "s/second commit/socond commit/" .git/objects/pack/*.pack && + "$PERL_PATH" -i.bak -pe "s/second commit/socond commit/" .git/objects/pack/*.pack && test_must_fail git fsck --full ' diff --git a/t/t6013-rev-list-reverse-parents.sh b/t/t6013-rev-list-reverse-parents.sh index 59fc2f0..892a537 100755 --- a/t/t6013-rev-list-reverse-parents.sh +++ b/t/t6013-rev-list-reverse-parents.sh @@ -25,7 +25,7 @@ test_expect_success 'set up --reverse example' ' test_expect_success '--reverse --parents --full-history combines correctly' ' git rev-list --parents --full-history master -- foo | - perl -e "print reverse <>" > expected && + "$PERL_PATH" -e "print reverse <>" > expected && git rev-list --reverse --parents --full-history master -- foo \ > actual && test_cmp actual expected @@ -33,7 +33,7 @@ test_expect_success '--reverse --parents --full-history combines correctly' ' test_expect_success '--boundary does too' ' git rev-list --boundary --parents --full-history master ^root -- foo | - perl -e "print reverse <>" > expected && + "$PERL_PATH" -e "print reverse <>" > expected && git rev-list --boundary --reverse --parents --full-history \ master ^root -- foo > actual && test_cmp actual expected diff --git a/t/t7007-show.sh b/t/t7007-show.sh index cce222f..a40cd36 100755 --- a/t/t7007-show.sh +++ b/t/t7007-show.sh @@ -17,4 +17,95 @@ test_expect_success 'showing a tag that point at a missing object' ' test_must_fail git --no-pager show foo-tag ' +test_expect_success 'set up a bit of history' ' + test_commit main1 && + test_commit main2 && + test_commit main3 && + git tag -m "annotated tag" annotated && + git checkout -b side HEAD^^ && + test_commit side2 && + test_commit side3 +' + +test_expect_success 'showing two commits' ' + cat >expect <<-EOF && + commit $(git rev-parse main2) + commit $(git rev-parse main3) + EOF + git show main2 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (linear)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show main1..main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (Y shape, ^ first)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show ^side3 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (Y shape, ^ last)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show main3 ^side3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing with -N walks' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show -2 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing annotated tag' ' + cat >expect <<-EOF && + tag annotated + commit $(git rev-parse annotated^{commit}) + EOF + git show annotated >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing annotated tag plus commit' ' + cat >expect <<-EOF && + tag annotated + commit $(git rev-parse annotated^{commit}) + commit $(git rev-parse side3) + EOF + git show annotated side3 >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing range' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show ^side3 annotated >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + test_done diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index b8cb490..f4f38a5 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -30,6 +30,9 @@ test_expect_success 'Report new path with conflict' ' cat >expect <<EOF # On branch side +# You have unmerged paths. +# (fix conflicts and run "git commit") +# # Unmerged paths: # (use "git add/rm <file>..." as appropriate to mark resolution) # @@ -118,4 +121,97 @@ test_expect_success 'git diff-index --cached -C shows 2 copies + 1 unmerged' ' test_cmp expected actual ' + +test_expect_success 'status when conflicts with add and rm advice (deleted by them)' ' + git reset --hard && + git checkout master && + test_commit init main.txt init && + git checkout -b second_branch && + git rm main.txt && + git commit -m "main.txt deleted on second_branch" && + test_commit second conflict.txt second && + git checkout master && + test_commit on_second main.txt on_second && + test_commit master conflict.txt master && + test_must_fail git merge second_branch && + cat >expected <<-\EOF && + # On branch master + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add/rm <file>..." as appropriate to mark resolution) + # + # both added: conflict.txt + # deleted by them: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for conflicts' ' + git reset --hard && + git checkout -b conflict && + test_commit one main.txt one && + git branch conflict_second && + git mv main.txt sub_master.txt && + git commit -m "main.txt renamed in sub_master.txt" && + git checkout conflict_second && + git mv main.txt sub_second.txt && + git commit -m "main.txt renamed in sub_second.txt" +' + + +test_expect_success 'status when conflicts with add and rm advice (both deleted)' ' + test_must_fail git merge conflict && + cat >expected <<-\EOF && + # On branch conflict_second + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add/rm <file>..." as appropriate to mark resolution) + # + # both deleted: main.txt + # added by them: sub_master.txt + # added by us: sub_second.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when conflicts with only rm advice (both deleted)' ' + git reset --hard conflict_second && + test_must_fail git merge conflict && + git add sub_master.txt && + git add sub_second.txt && + cat >expected <<-\EOF && + # On branch conflict_second + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Changes to be committed: + # + # new file: sub_master.txt + # + # Unmerged paths: + # (use "git rm <file>..." to mark resolution) + # + # both deleted: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual && + git reset --hard && + git checkout master +' + + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 81827e6..c73bec9 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -483,21 +483,72 @@ test_expect_success 'set up for relative path tests' ' git add sub && git config -f .gitmodules submodule.sub.path sub && git config -f .gitmodules submodule.sub.url ../subrepo && - cp .git/config pristine-.git-config + cp .git/config pristine-.git-config && + cp .gitmodules pristine-.gitmodules ) ' -test_expect_success 'relative path works with URL' ' +test_expect_success '../subrepo works with URL - ssh://hostname/repo' ' ( cd reltest && cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && git config remote.origin.url ssh://hostname/repo && git submodule init && test "$(git config submodule.sub.url)" = ssh://hostname/subrepo ) ' -test_expect_success 'relative path works with user@host:path' ' +test_expect_success '../subrepo works with port-qualified URL - ssh://hostname:22/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ssh://hostname:22/repo && + git submodule init && + test "$(git config submodule.sub.url)" = ssh://hostname:22/subrepo + ) +' + +# About the choice of the path in the next test: +# - double-slash side-steps path mangling issues on Windows +# - it is still an absolute local path +# - there cannot be a server with a blank in its name just in case the +# path is used erroneously to access a //server/share style path +test_expect_success '../subrepo path works with local path - //somewhere else/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url "//somewhere else/repo" && + git submodule init && + test "$(git config submodule.sub.url)" = "//somewhere else/subrepo" + ) +' + +test_expect_success '../subrepo works with file URL - file:///tmp/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url file:///tmp/repo && + git submodule init && + test "$(git config submodule.sub.url)" = file:///tmp/subrepo + ) +' + +test_expect_success '../subrepo works with helper URL- helper:://hostname/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url helper:://hostname/repo && + git submodule init && + test "$(git config submodule.sub.url)" = helper:://hostname/subrepo + ) +' + +test_expect_success '../subrepo works with scp-style URL - user@host:repo' ' ( cd reltest && cp pristine-.git-config .git/config && @@ -507,6 +558,98 @@ test_expect_success 'relative path works with user@host:path' ' ) ' +test_expect_success '../subrepo works with scp-style URL - user@host:path/to/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url user@host:path/to/repo && + git submodule init && + test "$(git config submodule.sub.url)" = user@host:path/to/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url foo && + # actual: fails with an error + git submodule init && + test "$(git config submodule.sub.url)" = subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = foo/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ./foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ./foo && + git submodule init && + test "$(git config submodule.sub.url)" = subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ./foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ./foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = foo/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ../foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ../foo && + git submodule init && + test "$(git config submodule.sub.url)" = ../subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ../foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ../foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = ../foo/subrepo + ) +' + +test_expect_success '../bar/a/b/c works with relative local path - ../foo/bar.git' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + mkdir -p a/b/c && + (cd a/b/c; git init) && + git config remote.origin.url ../foo/bar.git && + git submodule add ../bar/a/b/c ./a/b/c && + git submodule init && + test "$(git config submodule.a/b/c.url)" = ../foo/bar/a/b/c + ) +' + test_expect_success 'moving the superproject does not break submodules' ' ( cd addtest && diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 3620215..524d5c1 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -26,7 +26,9 @@ test_expect_success setup ' (cd super-clone && git submodule update --init) && git clone super empty-clone && (cd empty-clone && git submodule init) && - git clone super top-only-clone + git clone super top-only-clone && + git clone super relative-clone && + (cd relative-clone && git submodule update --init) ' test_expect_success 'change submodule' ' @@ -86,4 +88,90 @@ test_expect_success '"git submodule sync" should not vivify uninteresting submod ) ' +test_expect_success '"git submodule sync" handles origin URL of the form foo' ' + (cd relative-clone && + git remote set-url origin foo && + git submodule sync && + (cd submodule && + #actual fails with: "cannot strip off url foo + test "$(git config remote.origin.url)" = "../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form foo/bar' ' + (cd relative-clone && + git remote set-url origin foo/bar && + git submodule sync && + (cd submodule && + #actual foo/submodule + test "$(git config remote.origin.url)" = "../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ./foo' ' + (cd relative-clone && + git remote set-url origin ./foo && + git submodule sync && + (cd submodule && + #actual ./submodule + test "$(git config remote.origin.url)" = "../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ./foo/bar' ' + (cd relative-clone && + git remote set-url origin ./foo/bar && + git submodule sync && + (cd submodule && + #actual ./foo/submodule + test "$(git config remote.origin.url)" = "../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo' ' + (cd relative-clone && + git remote set-url origin ../foo && + git submodule sync && + (cd submodule && + #actual ../submodule + test "$(git config remote.origin.url)" = "../../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo/bar' ' + (cd relative-clone && + git remote set-url origin ../foo/bar && + git submodule sync && + (cd submodule && + #actual ../foo/submodule + test "$(git config remote.origin.url)" = "../../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo/bar with deeply nested submodule' ' + (cd relative-clone && + git remote set-url origin ../foo/bar && + mkdir -p a/b/c && + ( cd a/b/c && + git init && + :> .gitignore && + git add .gitignore && + test_tick && + git commit -m "initial commit" ) && + git submodule add ../bar/a/b/c ./a/b/c && + git submodule sync && + (cd a/b/c && + #actual ../foo/bar/a/b/c + test "$(git config remote.origin.url)" = "../../../../foo/bar/a/b/c" + ) + ) +' + + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index b20ca0e..676da85 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -487,4 +487,16 @@ test_expect_success 'amend can copy notes' ' ' +test_expect_success 'commit a file whose name is a dash' ' + git reset --hard && + for i in 1 2 3 4 5 + do + echo $i + done >./- && + git add ./- && + test_tick && + git commit -m "add dash" >output </dev/null && + test_i18ngrep " changed, 5 insertions" output +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 28e1848..c206f47 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -941,7 +941,7 @@ test_expect_success 'status -s submodule summary (clean submodule)' ' test_expect_success 'status -z implies porcelain' ' git status --porcelain | - perl -pe "s/\012/\000/g" >expect && + "$PERL_PATH" -pe "s/\012/\000/g" >expect && git status -z >output && test_cmp expect output ' diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh new file mode 100755 index 0000000..b3f6eb9 --- /dev/null +++ b/t/t7512-status-help.sh @@ -0,0 +1,649 @@ +#!/bin/sh +# +# Copyright (c) 2012 Valentin Duperray, Lucien Kong, Franck Jonas, +# Thomas Nguy, Khoi Nguyen +# Grenoble INP Ensimag +# + +test_description='git status advices' + +. ./test-lib.sh + +. "$TEST_DIRECTORY"/lib-rebase.sh + +set_fake_editor + +test_expect_success 'prepare for conflicts' ' + test_commit init main.txt init && + git branch conflicts && + test_commit on_master main.txt on_master && + git checkout conflicts && + test_commit on_conflicts main.txt on_conflicts +' + + +test_expect_success 'status when conflicts unresolved' ' + test_must_fail git merge master && + cat >expected <<-\EOF && + # On branch conflicts + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when conflicts resolved before commit' ' + git reset --hard conflicts && + test_must_fail git merge master && + echo one >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # On branch conflicts + # All conflicts fixed but you are still merging. + # (use "git commit" to conclude merge) + # + # Changes to be committed: + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for rebase conflicts' ' + git reset --hard master && + git checkout -b rebase_conflicts && + test_commit one_rebase main.txt one && + test_commit two_rebase main.txt two && + test_commit three_rebase main.txt three +' + + +test_expect_success 'status when rebase in progress before resolving conflicts' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (fix conflicts and then run "git rebase --continue") + # (use "git rebase --skip" to skip this patch) + # (use "git rebase --abort" to check out the original branch) + # + # Unmerged paths: + # (use "git reset HEAD <file>..." to unstage) + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebase in progress before rebase --continue' ' + git reset --hard rebase_conflicts && + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + echo three >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (all conflicts fixed: run "git rebase --continue") + # + # Changes to be committed: + # (use "git reset HEAD <file>..." to unstage) + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for rebase_i_conflicts' ' + git reset --hard master && + git checkout -b rebase_i_conflicts && + test_commit one_unmerge main.txt one_unmerge && + git branch rebase_i_conflicts_second && + test_commit one_master main.txt one_master && + git checkout rebase_i_conflicts_second && + test_commit one_second main.txt one_second +' + + +test_expect_success 'status during rebase -i when conflicts unresolved' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i rebase_i_conflicts && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (fix conflicts and then run "git rebase --continue") + # (use "git rebase --skip" to skip this patch) + # (use "git rebase --abort" to check out the original branch) + # + # Unmerged paths: + # (use "git reset HEAD <file>..." to unstage) + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status during rebase -i after resolving conflicts' ' + git reset --hard rebase_i_conflicts_second && + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i rebase_i_conflicts && + git add main.txt && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (all conflicts fixed: run "git rebase --continue") + # + # Changes to be committed: + # (use "git reset HEAD <file>..." to unstage) + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebasing -i in edit mode' ' + git reset --hard master && + git checkout -b rebase_i_edit && + test_commit one_rebase_i main.txt one && + test_commit two_rebase_i main.txt two && + test_commit three_rebase_i main.txt three && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~2 && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when splitting a commit' ' + git reset --hard master && + git checkout -b split_commit && + test_commit one_split main.txt one && + test_commit two_split main.txt two && + test_commit three_split main.txt three && + test_commit four_split main.txt four && + FAKE_LINES="1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status after editing the last commit with --amend during a rebase -i' ' + git reset --hard master && + git checkout -b amend_last && + test_commit one_amend main.txt one && + test_commit two_amend main.txt two && + test_commit three_amend main.txt three && + test_commit four_amend main.txt four && + FAKE_LINES="1 2 edit 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "foo" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for several edits' ' + git reset --hard master && + git checkout -b several_edits && + test_commit one_edits main.txt one && + test_commit two_edits main.txt two && + test_commit three_edits main.txt three && + test_commit four_edits main.txt four +' + + +test_expect_success 'status: (continue first edit) second edit' ' + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (continue first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (continue first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + git commit --amend -m "foo" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "a" && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "b" && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "c" && + git rebase --continue && + git commit --amend -m "d" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit -m "e" && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit --amend -m "f" && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit --amend -m "g" && + git rebase --continue && + git commit --amend -m "h" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare am_session' ' + git reset --hard master && + git checkout -b am_session && + test_commit one_am one.txt "one" && + test_commit two_am two.txt "two" && + test_commit three_am three.txt "three" +' + + +test_expect_success 'status in an am session: file already exists' ' + git checkout -b am_already_exists && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -1 -oMaildir && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_already_exists + # You are in the middle of an am session. + # (fix conflicts and then run "git am --resolved") + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status in an am session: file does not exist' ' + git reset --hard am_session && + git checkout -b am_not_exists && + git rm three.txt && + git commit -m "delete three.txt" && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -1 -oMaildir && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_not_exists + # You are in the middle of an am session. + # (fix conflicts and then run "git am --resolved") + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status in an am session: empty patch' ' + git reset --hard am_session && + git checkout -b am_empty && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -3 -oMaildir && + git rm one.txt two.txt three.txt && + git commit -m "delete all am_empty" && + echo error >Maildir/0002-two_am.patch && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_empty + # You are in the middle of an am session. + # The current patch is empty. + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when bisecting' ' + git reset --hard master && + git checkout -b bisect && + test_commit one_bisect main.txt one && + test_commit two_bisect main.txt two && + test_commit three_bisect main.txt three && + test_when_finished "git bisect reset" && + git bisect start && + git bisect bad && + git bisect good one_bisect && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently bisecting. + # (use "git bisect reset" to get back to the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebase conflicts with statushints disabled' ' + git reset --hard master && + git checkout -b statushints_disabled && + test_when_finished "git config --local advice.statushints true" && + git config --local advice.statushints false && + test_commit one_statushints main.txt one && + test_commit two_statushints main.txt two && + test_commit three_statushints main.txt three && + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # + # Unmerged paths: + # both modified: main.txt + # + no changes added to commit + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for cherry-pick conflicts' ' + git reset --hard master && + git checkout -b cherry_branch && + test_commit one_cherry main.txt one && + test_commit two_cherries main.txt two && + git checkout -b cherry_branch_second && + test_commit second_cherry main.txt second && + git checkout cherry_branch && + test_commit three_cherries main.txt three +' + + +test_expect_success 'status when cherry-picking before resolving conflicts' ' + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second && + cat >expected <<-\EOF && + # On branch cherry_branch + # You are currently cherry-picking. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when cherry-picking after resolving conflicts' ' + git reset --hard cherry_branch && + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second && + echo end >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # On branch cherry_branch + # You are currently cherry-picking. + # (all conflicts fixed: run "git commit") + # + # Changes to be committed: + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index c3c22f7..bf6caa4 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -10,7 +10,7 @@ find_blame() { cat >helper <<'EOF' #!/bin/sh grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } -perl -p -e 's/^bin: /converted: /' "$1" +"$PERL_PATH" -p -e 's/^bin: /converted: /' "$1" EOF chmod +x helper diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh index 8cfdfe7..9a40f1e 100755 --- a/t/t9129-git-svn-i18n-commitencoding.sh +++ b/t/t9129-git-svn-i18n-commitencoding.sh @@ -29,7 +29,7 @@ fi compare_svn_head_with () { # extract just the log message and strip out committer info. # don't use --limit here since svn 1.1.x doesn't have it, - LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e ' + LC_ALL="$a_utf8_locale" svn log `git svn info --url` | "$PERL_PATH" -w -e ' use bytes; $/ = ("-"x72) . "\n"; my @x = <STDIN>; diff --git a/t/t9137-git-svn-dcommit-clobber-series.sh b/t/t9137-git-svn-dcommit-clobber-series.sh index d60da63..c17aa31 100755 --- a/t/t9137-git-svn-dcommit-clobber-series.sh +++ b/t/t9137-git-svn-dcommit-clobber-series.sh @@ -20,8 +20,8 @@ test_expect_success '(supposedly) non-conflicting change from SVN' ' test x"`sed -n -e 61p < file`" = x61 && svn_cmd co "$svnrepo" tmp && (cd tmp && - perl -i.bak -p -e "s/^58$/5588/" file && - perl -i.bak -p -e "s/^61$/6611/" file && + "$PERL_PATH" -i.bak -p -e "s/^58$/5588/" file && + "$PERL_PATH" -i.bak -p -e "s/^61$/6611/" file && poke file && test x"`sed -n -e 58p < file`" = x5588 && test x"`sed -n -e 61p < file`" = x6611 && @@ -40,8 +40,8 @@ test_expect_success 'some unrelated changes to git' " test_expect_success 'change file but in unrelated area' " test x\"\`sed -n -e 4p < file\`\" = x4 && test x\"\`sed -n -e 7p < file\`\" = x7 && - perl -i.bak -p -e 's/^4\$/4444/' file && - perl -i.bak -p -e 's/^7\$/7777/' file && + "$PERL_PATH" -i.bak -p -e 's/^4\$/4444/' file && + "$PERL_PATH" -i.bak -p -e 's/^7\$/7777/' file && test x\"\`sed -n -e 4p < file\`\" = x4444 && test x\"\`sed -n -e 7p < file\`\" = x7777 && git commit -m '4 => 4444, 7 => 7777' file && diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index c17f52e..2fcf269 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -12,7 +12,7 @@ test_description='test git fast-import utility' # This could be written as "head -c $1", but IRIX "head" does not # support the -c option. head_c () { - perl -e ' + "$PERL_PATH" -e ' my $len = $ARGV[1]; while ($len > 0) { my $s; diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index b00196b..3e821f9 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -424,13 +424,13 @@ test_expect_success 'fast-export quotes pathnames' ' --cacheinfo 100644 $blob "path with \\backslash" \ --cacheinfo 100644 $blob "path with space" && git commit -m addition && - git ls-files -z -s | perl -0pe "s{\\t}{$&subdir/}" >index && + git ls-files -z -s | "$PERL_PATH" -0pe "s{\\t}{$&subdir/}" >index && git read-tree --empty && git update-index -z --index-info <index && git commit -m rename && git read-tree --empty && git commit -m deletion && - git fast-export HEAD >export.out && + git fast-export -M HEAD >export.out && git rev-list HEAD >expect && git init result && cd result && diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh index d8bb3d0..e9daa9c 100755 --- a/t/t9810-git-p4-rcs.sh +++ b/t/t9810-git-p4-rcs.sh @@ -246,7 +246,7 @@ test_expect_success 'cope with rcs keyword expansion damage' ' git config git-p4.attemptRCSCleanup true && (cd "$cli" && p4_append_to_file kwfile1.c) && old_lines=$(wc -l <kwfile1.c) && - perl -n -i -e "print unless m/Revision:/" kwfile1.c && + "$PERL_PATH" -n -i -e "print unless m/Revision:/" kwfile1.c && new_lines=$(wc -l <kwfile1.c) && test $new_lines = $(($old_lines - 1)) && diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 256e6a0..92d7eb4 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -3,21 +3,9 @@ # Copyright (c) 2012 Felipe Contreras # -if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then - # we are in full-on bash mode - true -elif type bash >/dev/null 2>&1; then - # execute in full-on bash mode - unset POSIXLY_CORRECT - exec bash "$0" "$@" -else - echo '1..0 #SKIP skipping bash completion tests; bash not available' - exit 0 -fi - test_description='test bash completion' -. ./test-lib.sh +. ./lib-bash.sh complete () { diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh new file mode 100755 index 0000000..f17c1f8 --- /dev/null +++ b/t/t9903-bash-prompt.sh @@ -0,0 +1,456 @@ +#!/bin/sh +# +# Copyright (c) 2012 SZEDER Gábor +# + +test_description='test git-specific bash prompt functions' + +. ./lib-bash.sh + +. "$GIT_BUILD_DIR/contrib/completion/git-prompt.sh" + +actual="$TRASH_DIRECTORY/actual" + +test_expect_success 'setup for prompt tests' ' + mkdir -p subdir/subsubdir && + git init otherrepo && + echo 1 > file && + git add file && + test_tick && + git commit -m initial && + git tag -a -m msg1 t1 && + git checkout -b b1 && + echo 2 > file && + git commit -m "second b1" file && + echo 3 > file && + git commit -m "third b1" file && + git tag -a -m msg2 t2 && + git checkout -b b2 master && + echo 0 > file && + git commit -m "second b2" file && + git checkout master +' + +test_expect_success 'gitdir - from command line (through $__git_dir)' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + __git_dir="$TRASH_DIRECTORY/otherrepo/.git" && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - repo as argument' ' + echo "otherrepo/.git" > expected && + __gitdir "otherrepo" > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - remote as argument' ' + echo "remote" > expected && + __gitdir "remote" > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - .git directory in cwd' ' + echo ".git" > expected && + __gitdir > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - .git directory in parent' ' + echo "$TRASH_DIRECTORY/.git" > expected && + ( + cd subdir/subsubdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - cwd is a .git directory' ' + echo "." > expected && + ( + cd .git && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - parent is a .git directory' ' + echo "$TRASH_DIRECTORY/.git" > expected && + ( + cd .git/refs/heads && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - $GIT_DIR set while .git directory in cwd' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" && + export GIT_DIR && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - $GIT_DIR set while .git directory in parent' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" && + export GIT_DIR && + cd subdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - non-existing $GIT_DIR' ' + ( + GIT_DIR="$TRASH_DIRECTORY/non-existing" && + export GIT_DIR && + test_must_fail __gitdir + ) +' + +test_expect_success 'gitdir - gitfile in cwd' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" > subdir/.git && + test_when_finished "rm -f subdir/.git" && + ( + cd subdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - gitfile in parent' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" > subdir/.git && + test_when_finished "rm -f subdir/.git" && + ( + cd subdir/subsubdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success SYMLINKS 'gitdir - resulting path avoids symlinks' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + mkdir otherrepo/dir && + test_when_finished "rm -rf otherrepo/dir" && + ln -s otherrepo/dir link && + test_when_finished "rm -f link" && + ( + cd link && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - not a git repository' ' + ( + cd subdir/subsubdir && + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY" && + export GIT_CEILING_DIRECTORIES && + test_must_fail __gitdir + ) +' + +test_expect_success 'prompt - branch name' ' + printf " (master)" > expected && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - detached head' ' + printf " ((%s...))" $(git log -1 --format="%h" b1^) > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - contains' ' + printf " ((t2~1))" > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=contains && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - branch' ' + printf " ((b1~1))" > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=branch && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - describe' ' + printf " ((t1-1-g%s))" $(git log -1 --format="%h" b1^) > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=describe && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - default' ' + printf " ((t2))" > expected && + git checkout --detach b1 && + test_when_finished "git checkout master" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - deep inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + cd .git/refs/heads && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - inside bare repository' ' + printf " (BARE:master)" > expected && + git init --bare bare.git && + test_when_finished "rm -rf bare.git" && + ( + cd bare.git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - interactive rebase' ' + printf " (b1|REBASE-i)" > expected + echo "#!$SHELL_PATH" >fake_editor.sh && + cat >>fake_editor.sh <<\EOF && +echo "edit $(git log -1 --format="%h")" > "$1" +EOF + test_when_finished "rm -f fake_editor.sh" && + chmod a+x fake_editor.sh && + test_set_editor "$TRASH_DIRECTORY/fake_editor.sh" && + git checkout b1 && + test_when_finished "git checkout master" && + git rebase -i HEAD^ && + test_when_finished "git rebase --abort" + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - rebase merge' ' + printf " (b2|REBASE-m)" > expected && + git checkout b2 && + test_when_finished "git checkout master" && + test_must_fail git rebase --merge b1 b2 && + test_when_finished "git rebase --abort" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - rebase' ' + printf " ((t2)|REBASE)" > expected && + git checkout b2 && + test_when_finished "git checkout master" && + test_must_fail git rebase b1 b2 && + test_when_finished "git rebase --abort" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - merge' ' + printf " (b1|MERGING)" > expected && + git checkout b1 && + test_when_finished "git checkout master" && + test_must_fail git merge b2 && + test_when_finished "git reset --hard" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - cherry-pick' ' + printf " (master|CHERRY-PICKING)" > expected && + test_must_fail git cherry-pick b1 && + test_when_finished "git reset --hard" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - bisect' ' + printf " (master|BISECTING)" > expected && + git bisect start && + test_when_finished "git bisect reset" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - clean' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty worktree' ' + printf " (master *)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty index' ' + printf " (master +)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + git add -u && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty index and worktree' ' + printf " (master *+)" > expected && + echo "dirty index" > file && + test_when_finished "git reset --hard" && + git add -u && + echo "dirty worktree" > file && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - before root commit' ' + printf " (master #)" > expected && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + cd otherrepo && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - disabled by config' ' + printf " (master)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + test_config bash.showDirtyState false && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - no stash' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWSTASHSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - stash' ' + printf " (master $)" > expected && + echo 2 >file && + git stash && + test_when_finished "git stash drop" && + ( + GIT_PS1_SHOWSTASHSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + echo 2 >file && + git stash && + test_when_finished "git stash drop" && + ( + GIT_PS1_SHOWSTASHSTATE=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - no untracked files' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd otherrepo && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - untracked files' ' + printf " (master %%)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - format string starting with dash' ' + printf -- "-master" > expected && + __git_ps1 "-%s" > "$actual" && + test_cmp expected "$actual" +' + +test_done diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 7b3b4be..1639769 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -76,11 +76,11 @@ test_decode_color () { } nul_to_q () { - perl -pe 'y/\000/Q/' + "$PERL_PATH" -pe 'y/\000/Q/' } q_to_nul () { - perl -pe 'y/Q/\000/' + "$PERL_PATH" -pe 'y/Q/\000/' } q_to_cr () { diff --git a/t/test-lib.sh b/t/test-lib.sh index 9e2b711..acda33d 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -494,6 +494,8 @@ export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +export PERL_PATH + if test -z "$GIT_TEST_CMP" then if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT" |