diff options
Diffstat (limited to 't')
69 files changed, 3565 insertions, 578 deletions
@@ -307,6 +307,25 @@ Don't: Use test_done instead if you need to stop the tests early (see "Skipping tests" below). + - use '! git cmd' when you want to make sure the git command exits + with failure in a controlled way by calling "die()". Instead, + use 'test_must_fail git cmd'. This will signal a failure if git + dies in an unexpected way (e.g. segfault). + + - use perl without spelling it as "$PERL_PATH". This is to help our + friends on Windows where the platform Perl often adds CR before + the end of line, and they bundle Git with a version of Perl that + does not do so, whose path is specified with $PERL_PATH. + + - use sh without spelling it as "$SHELL_PATH", when the script can + be misinterpreted by broken platform shell (e.g. Solaris). + + - chdir around in tests. It is not sufficient to chdir to + somewhere and then chdir back to the original location later in + the test, as any intermediate step can fail and abort the test, + causing the next test to start in an unexpected directory. Do so + inside a subshell if necessary. + - Break the TAP output The raw output from your test may be interpreted by a TAP harness. TAP @@ -342,9 +361,9 @@ If you need to skip tests you should do so by using the three-arg form of the test_* functions (see the "Test harness library" section below), e.g.: - test_expect_success PERL 'I need Perl' " - '$PERL_PATH' -e 'hlagh() if unf_unf()' - " + test_expect_success PERL 'I need Perl' ' + "$PERL_PATH" -e "hlagh() if unf_unf()" + ' The advantage of skipping tests like this is that platforms that don't have the PERL and other optional dependencies get an indication of how diff --git a/t/lib-bash.sh b/t/lib-bash.sh new file mode 100644 index 0000000..11397f7 --- /dev/null +++ b/t/lib-bash.sh @@ -0,0 +1,18 @@ +#!/bin/sh +# +# Ensures that tests are run under Bash; primarily intended for running tests +# of the completion script. + +if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then + # we are in full-on bash mode + true +elif type bash >/dev/null 2>&1; then + # execute in full-on bash mode + unset POSIXLY_CORRECT + exec bash "$0" "$@" +else + echo '1..0 #SKIP skipping bash completion tests; bash not available' + exit 0 +fi + +. ./test-lib.sh diff --git a/t/lib-credential.sh b/t/lib-credential.sh index 4a37cd7..957ae93 100755 --- a/t/lib-credential.sh +++ b/t/lib-credential.sh @@ -4,10 +4,20 @@ # stdout and stderr should be provided on stdin, # separated by "--". check() { + credential_opts= + credential_cmd=$1 + shift + for arg in "$@"; do + credential_opts="$credential_opts -c credential.helper='$arg'" + done read_chunk >stdin && read_chunk >expect-stdout && read_chunk >expect-stderr && - test-credential "$@" <stdin >stdout 2>stderr && + if ! eval "git $credential_opts credential $credential_cmd <stdin >stdout 2>stderr"; then + echo "git credential failed with code $?" && + cat stderr && + false + fi && test_cmp expect-stdout stdout && test_cmp expect-stderr stderr } @@ -41,7 +51,7 @@ reject() { echo protocol=$2 echo host=$3 echo username=$4 - ) | test-credential reject $1 + ) | git -c credential.helper=$1 credential reject } helper_test() { @@ -52,6 +62,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=askpass-username password=askpass-password -- @@ -74,6 +86,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=store-user password=store-pass -- @@ -85,6 +99,8 @@ helper_test() { protocol=http host=example.com -- + protocol=http + host=example.com username=askpass-username password=askpass-password -- @@ -98,6 +114,8 @@ helper_test() { protocol=https host=other.tld -- + protocol=https + host=other.tld username=askpass-username password=askpass-password -- @@ -112,6 +130,8 @@ helper_test() { host=example.com username=other -- + protocol=https + host=example.com username=other password=askpass-password -- @@ -133,6 +153,9 @@ helper_test() { host=path.tld path=bar.git -- + protocol=http + host=path.tld + path=bar.git username=askpass-username password=askpass-password -- @@ -150,6 +173,8 @@ helper_test() { protocol=https host=example.com -- + protocol=https + host=example.com username=askpass-username password=askpass-password -- @@ -176,6 +201,8 @@ helper_test() { host=example.com username=user1 -- + protocol=https + host=example.com username=user1 password=pass1 EOF @@ -184,6 +211,8 @@ helper_test() { host=example.com username=user2 -- + protocol=https + host=example.com username=user2 password=pass2 EOF @@ -200,6 +229,8 @@ helper_test() { host=example.com username=user1 -- + protocol=https + host=example.com username=user1 password=askpass-password -- @@ -213,6 +244,8 @@ helper_test() { host=example.com username=user2 -- + protocol=https + host=example.com username=user2 password=pass2 EOF @@ -234,6 +267,8 @@ helper_test_timeout() { protocol=https host=timeout.tld -- + protocol=https + host=timeout.tld username=askpass-username password=askpass-password -- diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 121e380..2d753ab 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -2,6 +2,10 @@ # Library code for git p4 tests # +# p4 tests never use the top-level repo; always build/clone into +# a subdirectory called "$git" +TEST_NO_CREATE_REPO=NoThanks + . ./test-lib.sh if ! test_have_prereq PYTHON; then @@ -27,23 +31,48 @@ export P4CLIENT=client export P4EDITOR=: db="$TRASH_DIRECTORY/db" -cli="$TRASH_DIRECTORY/cli" +cli=$(test-path-utils real_path "$TRASH_DIRECTORY/cli") git="$TRASH_DIRECTORY/git" pidfile="$TRASH_DIRECTORY/p4d.pid" start_p4d() { mkdir -p "$db" "$cli" "$git" && + rm -f "$pidfile" && ( p4d -q -r "$db" -p $P4DPORT & echo $! >"$pidfile" ) && - for i in 1 2 3 4 5 ; do - p4 info >/dev/null 2>&1 && break || true && - echo waiting for p4d to start && + + # This gives p4d a long time to start up, as it can be + # quite slow depending on the machine. Set this environment + # variable to something smaller to fail faster in, say, + # an automated test setup. If the p4d process dies, that + # will be caught with the "kill -0" check below. + i=${P4D_START_PATIENCE:-300} + pid=$(cat "$pidfile") + ready= + while test $i -gt 0 + do + # succeed when p4 client commands start to work + if p4 info >/dev/null 2>&1 + then + ready=true + break + fi + # fail if p4d died + kill -0 $pid 2>/dev/null || break + echo waiting for p4d to start sleep 1 - done && - # complain if it never started - p4 info >/dev/null && + i=$(( $i - 1 )) + done + + if test -z "$ready" + then + # p4d failed to start + return 1 + fi + + # build a client ( cd "$cli" && p4 client -i <<-EOF @@ -53,6 +82,7 @@ start_p4d() { View: //depot/... //client/... EOF ) + return 0 } kill_p4d() { @@ -69,5 +99,19 @@ kill_p4d() { } cleanup_git() { - rm -rf "$git" + rm -rf "$git" && + mkdir "$git" +} + +marshal_dump() { + what=$1 && + line=${2:-1} && + cat >"$TRASH_DIRECTORY/marshal-dump.py" <<-EOF && + import marshal + import sys + for i in range($line): + d = marshal.load(sys.stdin) + print d['$what'] + EOF + "$PYTHON_PATH" "$TRASH_DIRECTORY/marshal-dump.py" } diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index 094d490..d773542 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -43,6 +43,10 @@ TEST_PATH="$TEST_DIRECTORY"/lib-httpd HTTPD_ROOT_PATH="$PWD"/httpd HTTPD_DOCUMENT_ROOT_PATH=$HTTPD_ROOT_PATH/www +# hack to suppress apache PassEnv warnings +GIT_VALGRIND=$GIT_VALGRIND; export GIT_VALGRIND +GIT_VALGRIND_OPTIONS=$GIT_VALGRIND_OPTIONS; export GIT_VALGRIND_OPTIONS + if ! test -x "$LIB_HTTPD_PATH" then skip_all="skipping test, no web server found at '$LIB_HTTPD_PATH'" diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index de3762e..36b1596 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -42,6 +42,9 @@ ErrorLog error.log </IfModule> </IfVersion> +PassEnv GIT_VALGRIND +PassEnv GIT_VALGRIND_OPTIONS + Alias /dumb/ www/ Alias /auth/ www/auth/ @@ -62,7 +65,7 @@ ScriptAlias /smart/ ${GIT_EXEC_PATH}/git-http-backend/ ScriptAlias /smart_noexport/ ${GIT_EXEC_PATH}/git-http-backend/ ScriptAlias /smart_custom_env/ ${GIT_EXEC_PATH}/git-http-backend/ <Directory ${GIT_EXEC_PATH}> - Options None + Options FollowSymlinks </Directory> <Files ${GIT_EXEC_PATH}/git-http-backend> Options ExecCGI diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 20e28e3..538ea5f 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -82,6 +82,9 @@ test_expect_success 'credential_fill passes along metadata' ' host=example.com path=foo.git -- + protocol=ftp + host=example.com + path=foo.git username=one password=two -- @@ -213,6 +216,8 @@ test_expect_success 'match configured credential' ' host=example.com path=repo.git -- + protocol=https + host=example.com username=foo password=bar -- @@ -225,6 +230,8 @@ test_expect_success 'do not match configured credential' ' protocol=https host=bar -- + protocol=https + host=bar username=askpass-username password=askpass-password -- @@ -239,6 +246,8 @@ test_expect_success 'pull username from config' ' protocol=https host=example.com -- + protocol=https + host=example.com username=foo password=askpass-password -- @@ -252,6 +261,8 @@ test_expect_success 'http paths can be part of context' ' host=example.com path=foo.git -- + protocol=https + host=example.com username=foo password=bar -- @@ -265,6 +276,9 @@ test_expect_success 'http paths can be part of context' ' host=example.com path=foo.git -- + protocol=https + host=example.com + path=foo.git username=foo password=bar -- diff --git a/t/t1010-mktree.sh b/t/t1010-mktree.sh index b946f87..df573c4 100755 --- a/t/t1010-mktree.sh +++ b/t/t1010-mktree.sh @@ -42,13 +42,13 @@ test_expect_success 'ls-tree piped to mktree (2)' ' ' test_expect_success 'ls-tree output in wrong order given to mktree (1)' ' - perl -e "print reverse <>" <top | + "$PERL_PATH" -e "print reverse <>" <top | git mktree >actual && test_cmp tree actual ' test_expect_success 'ls-tree output in wrong order given to mktree (2)' ' - perl -e "print reverse <>" <top.withsub | + "$PERL_PATH" -e "print reverse <>" <top.withsub | git mktree >actual && test_cmp tree.withsub actual ' diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 55ed955..fd10528 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -130,10 +130,27 @@ test_expect_success 'git-show a large file' ' ' +test_expect_success 'index-pack' ' + git clone file://"`pwd`"/.git foo && + GIT_DIR=non-existent git index-pack --strict --verify foo/.git/objects/pack/*.pack +' + test_expect_success 'repack' ' git repack -ad ' +test_expect_success 'pack-objects with large loose object' ' + SHA1=`git hash-object huge` && + test_create_repo loose && + echo $SHA1 | git pack-objects --stdout | + GIT_ALLOC_LIMIT=0 GIT_DIR=loose/.git git unpack-objects && + echo $SHA1 | GIT_DIR=loose/.git git pack-objects pack && + test_create_repo packed && + mv pack-* packed/.git/objects/pack && + GIT_DIR=packed/.git git cat-file blob $SHA1 >actual && + cmp huge actual +' + test_expect_success 'tar achiving' ' git archive --format=tar HEAD >/dev/null ' diff --git a/t/t1100-commit-tree-options.sh b/t/t1100-commit-tree-options.sh index c4414ff..a3b7723 100755 --- a/t/t1100-commit-tree-options.sh +++ b/t/t1100-commit-tree-options.sh @@ -7,6 +7,9 @@ test_description='git commit-tree options test This test checks that git commit-tree can create a specific commit object by defining all environment variables that it understands. + +Also make sure that command line parser understands the normal +"flags first and then non flag arguments" command line. ' . ./test-lib.sh @@ -42,4 +45,18 @@ test_expect_success \ 'compare commit' \ 'test_cmp expected commit' + +test_expect_success 'flags and then non flags' ' + echo comment text | + git commit-tree $(cat treeid) >commitid && + echo comment text | + git commit-tree $(cat treeid) -p $(cat commitid) >childid-1 && + echo comment text | + git commit-tree -p $(cat commitid) $(cat treeid) >childid-2 && + test_cmp childid-1 childid-2 && + git commit-tree $(cat treeid) -m foo >childid-3 && + git commit-tree -m foo $(cat treeid) >childid-4 && + test_cmp childid-3 childid-4 +' + test_done diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 0843a1c..c5cb77a 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -171,4 +171,15 @@ test_expect_success 'relative path when startup_info is NULL' ' grep "BUG: startup_info struct is not initialized." error ' +test_expect_success '<commit>:file correctly diagnosed after a pathname' ' + test_must_fail git rev-parse file.txt HEAD:file.txt 1>actual 2>error && + test_i18ngrep ! "exists on disk" error && + test_i18ngrep "no such path in the working tree" error && + cat >expect <<-\EOF && + file.txt + HEAD:file.txt + EOF + test_cmp expect actual +' + test_done diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh new file mode 100755 index 0000000..6b3d797 --- /dev/null +++ b/t/t1512-rev-parse-disambiguation.sh @@ -0,0 +1,264 @@ +#!/bin/sh + +test_description='object name disambiguation + +Create blobs, trees, commits and a tag that all share the same +prefix, and make sure "git rev-parse" can take advantage of +type information to disambiguate short object names that are +not necessarily unique. + +The final history used in the test has five commits, with the bottom +one tagged as v1.0.0. They all have one regular file each. + + +-------------------------------------------+ + | | + | .-------b3wettvi---- ad2uee | + | / / | + | a2onsxbvj---czy8f73t--ioiley5o | + | | + +-------------------------------------------+ + +' + +. ./test-lib.sh + +test_expect_success 'blob and tree' ' + test_tick && + ( + for i in 0 1 2 3 4 5 6 7 8 9 + do + echo $i + done + echo + echo b1rwzyc3 + ) >a0blgqsjc && + + # create one blob 0000000000b36 + git add a0blgqsjc && + + # create one tree 0000000000cdc + git write-tree +' + +test_expect_success 'warn ambiguity when no candidate matches type hint' ' + test_must_fail git rev-parse --verify 000000000^{commit} 2>actual && + grep "short SHA1 000000000 is ambiguous" actual +' + +test_expect_success 'disambiguate tree-ish' ' + # feed tree-ish in an unambiguous way + git rev-parse --verify 0000000000cdc:a0blgqsjc && + + # ambiguous at the object name level, but there is only one + # such tree-ish (the other is a blob) + git rev-parse --verify 000000000:a0blgqsjc +' + +test_expect_success 'disambiguate blob' ' + sed -e "s/|$//" >patch <<-EOF && + diff --git a/frotz b/frotz + index 000000000..ffffff 100644 + --- a/frotz + +++ b/frotz + @@ -10,3 +10,4 @@ + 9 + | + b1rwzyc3 + +irwry + EOF + ( + GIT_INDEX_FILE=frotz && + export GIT_INDEX_FILE && + git apply --build-fake-ancestor frotz patch && + git cat-file blob :frotz >actual + ) && + test_cmp a0blgqsjc actual +' + +test_expect_success 'disambiguate tree' ' + commit=$(echo "d7xm" | git commit-tree 000000000) && + test $(git rev-parse $commit^{tree}) = $(git rev-parse 0000000000cdc) +' + +test_expect_success 'first commit' ' + # create one commit 0000000000e4f + git commit -m a2onsxbvj +' + +test_expect_success 'disambiguate commit-ish' ' + # feed commit-ish in an unambiguous way + git rev-parse --verify 0000000000e4f^{commit} && + + # ambiguous at the object name level, but there is only one + # such commit (the others are tree and blob) + git rev-parse --verify 000000000^{commit} && + + # likewise + git rev-parse --verify 000000000^0 +' + +test_expect_success 'disambiguate commit' ' + commit=$(echo "hoaxj" | git commit-tree 0000000000cdc -p 000000000) && + test $(git rev-parse $commit^) = $(git rev-parse 0000000000e4f) +' + +test_expect_success 'log name1..name2 takes only commit-ishes on both ends' ' + git log 000000000..000000000 && + git log ..000000000 && + git log 000000000.. && + git log 000000000...000000000 && + git log ...000000000 && + git log 000000000... +' + +test_expect_success 'rev-parse name1..name2 takes only commit-ishes on both ends' ' + git rev-parse 000000000..000000000 && + git rev-parse ..000000000 && + git rev-parse 000000000.. +' + +test_expect_success 'git log takes only commit-ish' ' + git log 000000000 +' + +test_expect_success 'git reset takes only commit-ish' ' + git reset 000000000 +' + +test_expect_success 'first tag' ' + # create one tag 0000000000f8f + git tag -a -m j7cp83um v1.0.0 +' + +test_expect_failure 'two semi-ambiguous commit-ish' ' + # Once the parser becomes ultra-smart, it could notice that + # 110282 before ^{commit} name many different objects, but + # that only two (HEAD and v1.0.0 tag) can be peeled to commit, + # and that peeling them down to commit yield the same commit + # without ambiguity. + git rev-parse --verify 110282^{commit} && + + # likewise + git log 000000000..000000000 && + git log ..000000000 && + git log 000000000.. && + git log 000000000...000000000 && + git log ...000000000 && + git log 000000000... +' + +test_expect_failure 'three semi-ambiguous tree-ish' ' + # Likewise for tree-ish. HEAD, v1.0.0 and HEAD^{tree} share + # the prefix but peeling them to tree yields the same thing + git rev-parse --verify 000000000^{tree} +' + +test_expect_success 'parse describe name' ' + # feed an unambiguous describe name + git rev-parse --verify v1.0.0-0-g0000000000e4f && + + # ambiguous at the object name level, but there is only one + # such commit (others are blob, tree and tag) + git rev-parse --verify v1.0.0-0-g000000000 +' + +test_expect_success 'more history' ' + # commit 0000000000043 + git mv a0blgqsjc d12cr3h8t && + echo h62xsjeu >>d12cr3h8t && + git add d12cr3h8t && + + test_tick && + git commit -m czy8f73t && + + # commit 00000000008ec + git mv d12cr3h8t j000jmpzn && + echo j08bekfvt >>j000jmpzn && + git add j000jmpzn && + + test_tick && + git commit -m ioiley5o && + + # commit 0000000005b0 + git checkout v1.0.0^0 && + git mv a0blgqsjc f5518nwu && + + for i in h62xsjeu j08bekfvt kg7xflhm + do + echo $i + done >>f5518nwu && + git add f5518nwu && + + test_tick && + git commit -m b3wettvi && + side=$(git rev-parse HEAD) && + + # commit 000000000066 + git checkout master && + + # If you use recursive, merge will fail and you will need to + # clean up a0blgqsjc as well. If you use resolve, merge will + # succeed. + test_might_fail git merge --no-commit -s recursive $side && + git rm -f f5518nwu j000jmpzn && + + test_might_fail git rm -f a0blgqsjc && + ( + git cat-file blob $side:f5518nwu + echo j3l0i9s6 + ) >ab2gs879 && + git add ab2gs879 && + + test_tick && + git commit -m ad2uee + +' + +test_expect_failure 'parse describe name taking advantage of generation' ' + # ambiguous at the object name level, but there is only one + # such commit at generation 0 + git rev-parse --verify v1.0.0-0-g000000000 && + + # likewise for generation 2 and 4 + git rev-parse --verify v1.0.0-2-g000000000 && + git rev-parse --verify v1.0.0-4-g000000000 +' + +# Note: because rev-parse does not even try to disambiguate based on +# the generation number, this test currently succeeds for a wrong +# reason. When it learns to use the generation number, the previous +# test should succeed, and also this test should fail because the +# describe name used in the test with generation number can name two +# commits. Make sure that such a future enhancement does not randomly +# pick one. +test_expect_success 'parse describe name not ignoring ambiguity' ' + # ambiguous at the object name level, and there are two such + # commits at generation 1 + test_must_fail git rev-parse --verify v1.0.0-1-g000000000 +' + +test_expect_success 'ambiguous commit-ish' ' + # Now there are many commits that begin with the + # common prefix, none of these should pick one at + # random. They all should result in ambiguity errors. + test_must_fail git rev-parse --verify 110282^{commit} && + + # likewise + test_must_fail git log 000000000..000000000 && + test_must_fail git log ..000000000 && + test_must_fail git log 000000000.. && + test_must_fail git log 000000000...000000000 && + test_must_fail git log ...000000000 && + test_must_fail git log 000000000... +' + +test_expect_success 'rev-parse --disambiguate' ' + # The test creates 16 objects that share the prefix and two + # commits created by commit-tree in earlier tests share a + # different prefix. + git rev-parse --disambiguate=000000000 >actual && + test $(wc -l <actual) = 16 && + test "$(sed -e "s/^\(.........\).*/\1/" actual | sort -u)" = 000000000 +' + +test_done diff --git a/t/t2017-checkout-orphan.sh b/t/t2017-checkout-orphan.sh index 0e3b858..655f278 100755 --- a/t/t2017-checkout-orphan.sh +++ b/t/t2017-checkout-orphan.sh @@ -116,4 +116,10 @@ test_expect_success '--orphan refuses to switch if a merge is needed' ' git reset --hard ' +test_expect_success 'cannot --detach on an unborn branch' ' + git checkout master && + git checkout --orphan new && + test_must_fail git checkout --detach +' + test_done diff --git a/t/t3006-ls-files-long.sh b/t/t3006-ls-files-long.sh new file mode 100755 index 0000000..202ad65 --- /dev/null +++ b/t/t3006-ls-files-long.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +test_description='overly long paths' +. ./test-lib.sh + +test_expect_success setup ' + p=filefilefilefilefilefilefilefile && + p=$p$p$p$p$p$p$p$p$p$p$p$p$p$p$p$p && + p=$p$p$p$p$p$p$p$p$p$p$p$p$p$p$p$p && + + path_a=${p}_a && + path_z=${p}_z && + + blob_a=$(echo frotz | git hash-object -w --stdin) && + blob_z=$(echo nitfol | git hash-object -w --stdin) && + + pat="100644 %s 0\t%s\n" +' + +test_expect_success 'overly-long path by itself is not a problem' ' + printf "$pat" "$blob_a" "$path_a" | + git update-index --add --index-info && + echo "$path_a" >expect && + git ls-files >actual && + test_cmp expect actual +' + +test_expect_success 'overly-long path does not replace another by mistake' ' + printf "$pat" "$blob_a" "$path_a" "$blob_z" "$path_z" | + git update-index --add --index-info && + ( + echo "$path_a" + echo "$path_z" + ) >expect && + git ls-files >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t3300-funny-names.sh b/t/t3300-funny-names.sh index c53c9f6..1f35e55 100755 --- a/t/t3300-funny-names.sh +++ b/t/t3300-funny-names.sh @@ -71,7 +71,7 @@ test_expect_success 'ls-files -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git ls-files -z >ls-files.z && - perl -pe "y/\000/\012/" <ls-files.z >current && + "$PERL_PATH" -pe "y/\000/\012/" <ls-files.z >current && test_cmp expected current ' @@ -108,7 +108,7 @@ test_expect_success 'diff-index -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git diff-index -z --name-status $t0 >diff-index.z && - perl -pe "y/\000/\012/" <diff-index.z >current && + "$PERL_PATH" -pe "y/\000/\012/" <diff-index.z >current && test_cmp expected current ' @@ -118,7 +118,7 @@ test_expect_success 'diff-tree -z does not quote funny filename' ' tabs ," (dq) and spaces EOF git diff-tree -z --name-status $t0 $t1 >diff-tree.z && - perl -pe y/\\000/\\012/ <diff-tree.z >current && + "$PERL_PATH" -pe y/\\000/\\012/ <diff-tree.z >current && test_cmp expected current ' diff --git a/t/t3401-rebase-partial.sh b/t/t3401-rebase-partial.sh index 7ba1797..7f8693b 100755 --- a/t/t3401-rebase-partial.sh +++ b/t/t3401-rebase-partial.sh @@ -42,4 +42,12 @@ test_expect_success 'rebase --merge topic branch that was partially merged upstr test_path_is_missing .git/rebase-merge ' +test_expect_success 'rebase ignores empty commit' ' + git reset --hard A && + git commit --allow-empty -m empty && + test_commit D && + git rebase C && + test $(git log --format=%s C..) = "D" +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 025c1c6..3f75d32 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -755,4 +755,160 @@ test_expect_success 'rebase-i history with funny messages' ' test_cmp expect actual ' + +test_expect_success 'prepare for rebase -i --exec' ' + git checkout master && + git checkout -b execute && + test_commit one_exec main.txt one_exec && + test_commit two_exec main.txt two_exec && + test_commit three_exec main.txt three_exec +' + + +test_expect_success 'running "git rebase -i --exec git show HEAD"' ' + git rebase -i --exec "git show HEAD" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'running "git rebase --exec git show HEAD -i"' ' + git reset --hard execute && + git rebase --exec "git show HEAD" -i HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'running "git rebase -ix git show HEAD"' ' + git reset --hard execute && + git rebase -ix "git show HEAD" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with several <CMD>' ' + git reset --hard execute && + git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,9d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with several instances of --exec' ' + git reset --hard execute && + git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && + ( + FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2 + exec_git_show_HEAD exec_pwd" && + export FAKE_LINES && + git rebase -i HEAD~2 >expect + ) && + sed -e "1,11d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase -ix with --autosquash' ' + git reset --hard execute && + git checkout -b autosquash && + echo second >second.txt && + git add second.txt && + git commit -m "fixup! two_exec" && + echo bis >bis.txt && + git add bis.txt && + git commit -m "fixup! two_exec" && + ( + git checkout -b autosquash_actual && + git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual + ) && + git checkout autosquash && + ( + git checkout -b autosquash_expected && + FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" && + export FAKE_LINES && + git rebase -i HEAD~4 >expect + ) && + sed -e "1,13d" expect >expected && + test_cmp expected actual +' + + +test_expect_success 'rebase --exec without -i shows error message' ' + git reset --hard execute && + test_must_fail git rebase --exec "git show HEAD" HEAD~2 2>actual && + echo "--exec option must be used with --interactive option" >expected && + test_i18ncmp expected actual +' + + +test_expect_success 'rebase -i --exec without <CMD>' ' + git reset --hard execute && + test_must_fail git rebase -i --exec 2>tmp && + sed -e "1d" tmp >actual && + test_must_fail git rebase -h >expected && + test_cmp expected actual && + git checkout master +' + +test_expect_success 'rebase -i --root re-order and drop commits' ' + git checkout E && + FAKE_LINES="3 1 2 5" git rebase -i --root && + test E = $(git cat-file commit HEAD | sed -ne \$p) && + test B = $(git cat-file commit HEAD^ | sed -ne \$p) && + test A = $(git cat-file commit HEAD^^ | sed -ne \$p) && + test C = $(git cat-file commit HEAD^^^ | sed -ne \$p) && + test 0 = $(git cat-file commit HEAD^^^ | grep -c ^parent\ ) +' + +test_expect_success 'rebase -i --root retain root commit author and message' ' + git checkout A && + echo B >file7 && + git add file7 && + GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && + FAKE_LINES="2" git rebase -i --root && + git cat-file commit HEAD | grep -q "^author Twerp Snog" && + git cat-file commit HEAD | grep -q "^different author$" +' + +test_expect_success 'rebase -i --root temporary sentinel commit' ' + git checkout B && + ( + FAKE_LINES="2" && + export FAKE_LINES && + test_must_fail git rebase -i --root + ) && + git cat-file commit HEAD | grep "^tree 4b825dc642cb" && + git rebase --abort +' + +test_expect_success 'rebase -i --root fixup root commit' ' + git checkout B && + FAKE_LINES="1 fixup 2" git rebase -i --root && + test A = $(git cat-file commit HEAD | sed -ne \$p) && + test B = $(git show HEAD:file1) && + test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) +' + test_done diff --git a/t/t3405-rebase-malformed.sh b/t/t3405-rebase-malformed.sh index e5ad67c..19eddad 100755 --- a/t/t3405-rebase-malformed.sh +++ b/t/t3405-rebase-malformed.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='rebase should not insist on git message convention' +test_description='rebase should handle arbitrary git message' . ./test-lib.sh @@ -12,6 +12,11 @@ It has two paragraphs, but its first paragraph is not friendly to oneline summary format. EOF +cat >G <<\EOF +commit log message containing a diff +EOF + + test_expect_success setup ' >file1 && @@ -19,8 +24,9 @@ test_expect_success setup ' git add file1 file2 && test_tick && git commit -m "Initial commit" && + git branch diff-in-message - git checkout -b side && + git checkout -b multi-line-subject && cat F >file2 && git add file2 && test_tick && @@ -28,6 +34,17 @@ test_expect_success setup ' git cat-file commit HEAD | sed -e "1,/^\$/d" >F0 && + git checkout diff-in-message && + echo "commit log message containing a diff" >G && + echo "" >>G + cat G >file2 && + git add file2 && + git diff --cached >>G && + test_tick && + git commit -F G && + + git cat-file commit HEAD | sed -e "1,/^\$/d" >G0 && + git checkout master && echo One >file1 && @@ -36,13 +53,20 @@ test_expect_success setup ' git commit -m "Second commit" ' -test_expect_success rebase ' +test_expect_success 'rebase commit with multi-line subject' ' - git rebase master side && + git rebase master multi-line-subject && git cat-file commit HEAD | sed -e "1,/^\$/d" >F1 && test_cmp F0 F1 && test_cmp F F0 ' +test_expect_success 'rebase commit with diff in message' ' + git rebase master diff-in-message && + git cat-file commit HEAD | sed -e "1,/^$/d" >G1 && + test_cmp G0 G1 && + test_cmp G G0 +' + test_done diff --git a/t/t3412-rebase-root.sh b/t/t3412-rebase-root.sh index 086c91c..0b52105 100755 --- a/t/t3412-rebase-root.sh +++ b/t/t3412-rebase-root.sh @@ -22,8 +22,9 @@ test_expect_success 'prepare repository' ' test_commit 4 B ' -test_expect_success 'rebase --root expects --onto' ' - test_must_fail git rebase --root +test_expect_success 'rebase --root fails with too many args' ' + git checkout -B fail other && + test_must_fail git rebase --onto master --root fail fail ' test_expect_success 'setup pre-rebase hook' ' @@ -42,7 +43,7 @@ cat > expect <<EOF EOF test_expect_success 'rebase --root --onto <newbase>' ' - git checkout -b work && + git checkout -b work other && git rebase --root --onto master && git log --pretty=tformat:"%s" > rebased && test_cmp expect rebased diff --git a/t/t3910-mac-os-precompose.sh b/t/t3910-mac-os-precompose.sh new file mode 100755 index 0000000..88b7a20 --- /dev/null +++ b/t/t3910-mac-os-precompose.sh @@ -0,0 +1,164 @@ +#!/bin/sh +# +# Copyright (c) 2012 Torsten Bögershausen +# + +test_description='utf-8 decomposed (nfd) converted to precomposed (nfc)' + +. ./test-lib.sh + +Adiarnfc=`printf '\303\204'` +Adiarnfd=`printf 'A\314\210'` + +# check if the feature is compiled in +mkdir junk && +>junk/"$Adiarnfc" && +case "$(cd junk && echo *)" in + "$Adiarnfd") + test_nfd=1 + ;; + *) ;; +esac +rm -rf junk + + +if test "$test_nfd" +then + # create more utf-8 variables + Odiarnfc=`printf '\303\226'` + Odiarnfd=`printf 'O\314\210'` + AEligatu=`printf '\303\206'` + Invalidu=`printf '\303\377'` + + + #Create a string with 255 bytes (decomposed) + Alongd=$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd$Adiarnfd #21 Byte + Alongd=$Alongd$Alongd$Alongd #63 Byte + Alongd=$Alongd$Alongd$Alongd$Alongd$Adiarnfd #255 Byte + + #Create a string with 254 bytes (precomposed) + Alongc=$AEligatu$AEligatu$AEligatu$AEligatu$AEligatu #10 Byte + Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #50 Byte + Alongc=$Alongc$Alongc$Alongc$Alongc$Alongc #250 Byte + Alongc=$Alongc$AEligatu$AEligatu #254 Byte + + test_expect_success "detect if nfd needed" ' + precomposeunicode=`git config core.precomposeunicode` && + test "$precomposeunicode" = false && + git config core.precomposeunicode true + ' + test_expect_success "setup" ' + >x && + git add x && + git commit -m "1st commit" && + git rm x && + git commit -m "rm x" + ' + test_expect_success "setup case mac" ' + git checkout -b mac_os + ' + # This will test nfd2nfc in readdir() + test_expect_success "add file Adiarnfc" ' + echo f.Adiarnfc >f.$Adiarnfc && + git add f.$Adiarnfc && + git commit -m "add f.$Adiarnfc" + ' + # This will test nfd2nfc in git stage() + test_expect_success "stage file d.Adiarnfd/f.Adiarnfd" ' + mkdir d.$Adiarnfd && + echo d.$Adiarnfd/f.$Adiarnfd >d.$Adiarnfd/f.$Adiarnfd && + git stage d.$Adiarnfd/f.$Adiarnfd && + git commit -m "add d.$Adiarnfd/f.$Adiarnfd" + ' + test_expect_success "add link Adiarnfc" ' + ln -s d.$Adiarnfd/f.$Adiarnfd l.$Adiarnfc && + git add l.$Adiarnfc && + git commit -m "add l.Adiarnfc" + ' + # This will test git log + test_expect_success "git log f.Adiar" ' + git log f.$Adiarnfc > f.Adiarnfc.log && + git log f.$Adiarnfd > f.Adiarnfd.log && + test -s f.Adiarnfc.log && + test -s f.Adiarnfd.log && + test_cmp f.Adiarnfc.log f.Adiarnfd.log && + rm f.Adiarnfc.log f.Adiarnfd.log + ' + # This will test git ls-files + test_expect_success "git lsfiles f.Adiar" ' + git ls-files f.$Adiarnfc > f.Adiarnfc.log && + git ls-files f.$Adiarnfd > f.Adiarnfd.log && + test -s f.Adiarnfc.log && + test -s f.Adiarnfd.log && + test_cmp f.Adiarnfc.log f.Adiarnfd.log && + rm f.Adiarnfc.log f.Adiarnfd.log + ' + # This will test git mv + test_expect_success "git mv" ' + git mv f.$Adiarnfd f.$Odiarnfc && + git mv d.$Adiarnfd d.$Odiarnfc && + git mv l.$Adiarnfd l.$Odiarnfc && + git commit -m "mv Adiarnfd Odiarnfc" + ' + # Files can be checked out as nfc + # And the link has been corrected from nfd to nfc + test_expect_success "git checkout nfc" ' + rm f.$Odiarnfc && + git checkout f.$Odiarnfc + ' + # Make it possible to checkout files with their NFD names + test_expect_success "git checkout file nfd" ' + rm -f f.* && + git checkout f.$Odiarnfd + ' + # Make it possible to checkout links with their NFD names + test_expect_success "git checkout link nfd" ' + rm l.* && + git checkout l.$Odiarnfd + ' + test_expect_success "setup case mac2" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_2 + ' + # This will test nfd2nfc in git commit + test_expect_success "commit file d2.Adiarnfd/f.Adiarnfd" ' + mkdir d2.$Adiarnfd && + echo d2.$Adiarnfd/f.$Adiarnfd >d2.$Adiarnfd/f.$Adiarnfd && + git add d2.$Adiarnfd/f.$Adiarnfd && + git commit -m "add d2.$Adiarnfd/f.$Adiarnfd" -- d2.$Adiarnfd/f.$Adiarnfd + ' + test_expect_success "setup for long decomposed filename" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_long_nfd_fn + ' + test_expect_success "Add long decomposed filename" ' + echo longd >$Alongd && + git add * && + git commit -m "Long filename" + ' + test_expect_success "setup for long precomposed filename" ' + git checkout master && + git reset --hard && + git checkout -b mac_os_long_nfc_fn + ' + test_expect_success "Add long precomposed filename" ' + echo longc >$Alongc && + git add * && + git commit -m "Long filename" + ' + # Test if the global core.precomposeunicode stops autosensing + # Must be the last test case + test_expect_success "respect git config --global core.precomposeunicode" ' + git config --global core.precomposeunicode true && + rm -rf .git && + git init && + precomposeunicode=`git config core.precomposeunicode` && + test "$precomposeunicode" = "true" + ' +else + say "Skipping nfc/nfd tests" +fi + +test_done diff --git a/t/t4012-diff-binary.sh b/t/t4012-diff-binary.sh index 6cebb39..ec4deea 100755 --- a/t/t4012-diff-binary.sh +++ b/t/t4012-diff-binary.sh @@ -15,13 +15,14 @@ cat >expect.binary-numstat <<\EOF - - d EOF -test_expect_success 'prepare repository' \ - 'echo AIT >a && echo BIT >b && echo CIT >c && echo DIT >d && - git update-index --add a b c d && - echo git >a && - cat "$TEST_DIRECTORY"/test-binary-1.png >b && - echo git >c && - cat b b >d' +test_expect_success 'prepare repository' ' + echo AIT >a && echo BIT >b && echo CIT >c && echo DIT >d && + git update-index --add a b c d && + echo git >a && + cat "$TEST_DIRECTORY"/test-binary-1.png >b && + echo git >c && + cat b b >d +' cat > expected <<\EOF a | 2 +- @@ -30,16 +31,16 @@ cat > expected <<\EOF d | Bin 4 files changed, 2 insertions(+), 2 deletions(-) EOF -test_expect_success '"apply --stat" output for binary file change' ' +test_expect_success 'apply --stat output for binary file change' ' git diff >diff && git apply --stat --summary <diff >current && test_i18ncmp expected current ' test_expect_success 'diff --shortstat output for binary file change' ' - echo " 4 files changed, 2 insertions(+), 2 deletions(-)" >expected && + tail -n 1 expected >expect && git diff --shortstat >current && - test_i18ncmp expected current + test_i18ncmp expect current ' test_expect_success 'diff --shortstat output for binary file change only' ' @@ -62,49 +63,42 @@ test_expect_success 'apply --numstat understands diff --binary format' ' # apply needs to be able to skip the binary material correctly # in order to report the line number of a corrupt patch. -test_expect_success 'apply detecting corrupt patch correctly' \ - 'git diff | sed -e 's/-CIT/xCIT/' >broken && - if git apply --stat --summary broken 2>detected - then - echo unhappy - should have detected an error - (exit 1) - else - echo happy - fi && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && - test "$detected" = xCIT' - -test_expect_success 'apply detecting corrupt patch correctly' \ - 'git diff --binary | sed -e 's/-CIT/xCIT/' >broken && - if git apply --stat --summary broken 2>detected - then - echo unhappy - should have detected an error - (exit 1) - else - echo happy - fi && - detected=`cat detected` && - detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && - detected=`sed -ne "${detected}p" broken` && - test "$detected" = xCIT' +test_expect_success 'apply detecting corrupt patch correctly' ' + git diff >output && + sed -e "s/-CIT/xCIT/" <output >broken && + test_must_fail git apply --stat --summary broken 2>detected && + detected=`cat detected` && + detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && + detected=`sed -ne "${detected}p" broken` && + test "$detected" = xCIT +' + +test_expect_success 'apply detecting corrupt patch correctly' ' + git diff --binary | sed -e "s/-CIT/xCIT/" >broken && + test_must_fail git apply --stat --summary broken 2>detected && + detected=`cat detected` && + detected=`expr "$detected" : "fatal.*at line \\([0-9]*\\)\$"` && + detected=`sed -ne "${detected}p" broken` && + test "$detected" = xCIT +' test_expect_success 'initial commit' 'git commit -a -m initial' # Try removal (b), modification (d), and creation (e). -test_expect_success 'diff-index with --binary' \ - 'echo AIT >a && mv b e && echo CIT >c && cat e >d && - git update-index --add --remove a b c d e && - tree0=`git write-tree` && - git diff --cached --binary >current && - git apply --stat --summary current' - -test_expect_success 'apply binary patch' \ - 'git reset --hard && - git apply --binary --index <current && - tree1=`git write-tree` && - test "$tree1" = "$tree0"' +test_expect_success 'diff-index with --binary' ' + echo AIT >a && mv b e && echo CIT >c && cat e >d && + git update-index --add --remove a b c d e && + tree0=`git write-tree` && + git diff --cached --binary >current && + git apply --stat --summary current +' + +test_expect_success 'apply binary patch' ' + git reset --hard && + git apply --binary --index <current && + tree1=`git write-tree` && + test "$tree1" = "$tree0" +' test_expect_success 'diff --no-index with binary creation' ' echo Q | q_to_nul >binary && @@ -125,7 +119,7 @@ cat >expect <<EOF EOF test_expect_success 'diff --stat with binary files and big change count' ' - echo X | dd of=binfile bs=1k seek=1 && + printf "\01\00%1024d" 1 >binfile && git add binfile && i=0 && while test $i -lt 10000; do diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index b473b6d..959aa26 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -243,7 +243,7 @@ check_threading () { (git format-patch --stdout "$@"; echo $? > status.out) | # Prints everything between the Message-ID and In-Reply-To, # and replaces all Message-ID-lookalikes by a sequence number - perl -ne ' + "$PERL_PATH" -ne ' if (/^(message-id|references|in-reply-to)/i) { $printing = 1; } elsif (/^\S/) { diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index 083f62d..2e7d73f 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -48,7 +48,53 @@ test_expect_success 'GIT_EXTERNAL_DIFF environment and --no-ext-diff' ' ' +test_expect_success SYMLINKS 'typechange diff' ' + rm -f file && + ln -s elif file && + GIT_EXTERNAL_DIFF=echo git diff | { + read path oldfile oldhex oldmode newfile newhex newmode && + test "z$path" = zfile && + test "z$oldmode" = z100644 && + test "z$newhex" = "z$_z40" && + test "z$newmode" = z120000 && + oh=$(git rev-parse --verify HEAD:file) && + test "z$oh" = "z$oldhex" + } && + GIT_EXTERNAL_DIFF=echo git diff --no-ext-diff >actual && + git diff >expect && + test_cmp expect actual +' + +test_expect_success 'diff.external' ' + git reset --hard && + echo third >file && + test_config diff.external echo && + git diff | { + read path oldfile oldhex oldmode newfile newhex newmode && + test "z$path" = zfile && + test "z$oldmode" = z100644 && + test "z$newhex" = "z$_z40" && + test "z$newmode" = z100644 && + oh=$(git rev-parse --verify HEAD:file) && + test "z$oh" = "z$oldhex" + } +' + +test_expect_success 'diff.external should apply only to diff' ' + test_config diff.external echo && + git log -p -1 HEAD | + grep "^diff --git a/file b/file" +' + +test_expect_success 'diff.external and --no-ext-diff' ' + test_config diff.external echo && + git diff --no-ext-diff | + grep "^diff --git a/file b/file" +' + test_expect_success 'diff attribute' ' + git reset --hard && + echo third >file && git config diff.parrot.command echo && @@ -113,12 +159,25 @@ test_expect_success 'diff attribute and --no-ext-diff' ' ' +test_expect_success 'GIT_EXTERNAL_DIFF trumps diff.external' ' + >.gitattributes && + test_config diff.external "echo ext-global" && + GIT_EXTERNAL_DIFF="echo ext-env" git diff | grep ext-env +' + +test_expect_success 'attributes trump GIT_EXTERNAL_DIFF and diff.external' ' + test_config diff.foo.command "echo ext-attribute" && + test_config diff.external "echo ext-global" && + echo "file diff=foo" >.gitattributes && + GIT_EXTERNAL_DIFF="echo ext-env" git diff | grep ext-attribute +' + test_expect_success 'no diff with -diff' ' echo >.gitattributes "file -diff" && git diff | grep Binary ' -echo NULZbetweenZwords | perl -pe 'y/Z/\000/' > file +echo NULZbetweenZwords | "$PERL_PATH" -pe 'y/Z/\000/' > file test_expect_success 'force diff with "diff"' ' echo >.gitattributes "file diff" && diff --git a/t/t4029-diff-trailing-space.sh b/t/t4029-diff-trailing-space.sh index 3ccc237..36e2f07 100755 --- a/t/t4029-diff-trailing-space.sh +++ b/t/t4029-diff-trailing-space.sh @@ -27,7 +27,7 @@ test_expect_success \ git config --bool diff.suppressBlankEmpty true && git diff f > actual && test_cmp exp actual && - perl -i.bak -p -e "s/^\$/ /" exp && + "$PERL_PATH" -i.bak -p -e "s/^\$/ /" exp && git config --bool diff.suppressBlankEmpty false && git diff f > actual && test_cmp exp actual && diff --git a/t/t4030-diff-textconv.sh b/t/t4030-diff-textconv.sh index d4ab4f2..eebb1ee 100755 --- a/t/t4030-diff-textconv.sh +++ b/t/t4030-diff-textconv.sh @@ -21,7 +21,7 @@ EOF cat >hexdump <<'EOF' #!/bin/sh -perl -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" +"$PERL_PATH" -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" EOF chmod +x hexdump diff --git a/t/t4031-diff-rewrite-binary.sh b/t/t4031-diff-rewrite-binary.sh index c8296fa..eacc669 100755 --- a/t/t4031-diff-rewrite-binary.sh +++ b/t/t4031-diff-rewrite-binary.sh @@ -60,7 +60,7 @@ test_expect_success 'diff --stat counts binary rewrite as 0 lines' ' { echo "#!$SHELL_PATH" cat <<'EOF' -perl -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" +"$PERL_PATH" -e '$/ = undef; $_ = <>; s/./ord($&)/ge; print $_' < "$1" EOF } >dump chmod +x dump diff --git a/t/t4035-diff-quiet.sh b/t/t4035-diff-quiet.sh index cdb9202..231412d 100755 --- a/t/t4035-diff-quiet.sh +++ b/t/t4035-diff-quiet.sh @@ -10,7 +10,22 @@ test_expect_success 'setup' ' git commit -m first && echo 2 >b && git add . && - git commit -a -m second + git commit -a -m second && + mkdir -p test-outside/repo && ( + cd test-outside/repo && + git init && + echo "1 1" >a && + git add . && + git commit -m 1 + ) && + mkdir -p test-outside/non/git && ( + cd test-outside/non/git && + echo "1 1" >a && + echo "1 1" >matching-file && + echo "1 1 " >trailing-space && + echo "1 1" >extra-space && + echo "2" >never-match + ) ' test_expect_success 'git diff-tree HEAD^ HEAD' ' @@ -77,4 +92,60 @@ test_expect_success 'git diff-index --cached HEAD' ' } ' +test_expect_success 'git diff, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet a ../non/git/matching-file && + test_expect_code 1 git diff --quiet a ../non/git/extra-space + ) +' + +test_expect_success 'git diff, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet a matching-file && + test_expect_code 1 git diff --quiet a extra-space + ) +' + +test_expect_success 'git diff --ignore-space-at-eol, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet --ignore-space-at-eol a ../non/git/trailing-space && + test_expect_code 1 git diff --quiet --ignore-space-at-eol a ../non/git/extra-space + ) +' + +test_expect_success 'git diff --ignore-space-at-eol, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet --ignore-space-at-eol a trailing-space && + test_expect_code 1 git diff --quiet --ignore-space-at-eol a extra-space + ) +' + +test_expect_success 'git diff --ignore-all-space, one file outside repo' ' + ( + cd test-outside/repo && + test_expect_code 0 git diff --quiet --ignore-all-space a ../non/git/trailing-space && + test_expect_code 0 git diff --quiet --ignore-all-space a ../non/git/extra-space && + test_expect_code 1 git diff --quiet --ignore-all-space a ../non/git/never-match + ) +' + +test_expect_success 'git diff --ignore-all-space, both files outside repo' ' + ( + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/test-outside" && + export GIT_CEILING_DIRECTORIES && + cd test-outside/non/git && + test_expect_code 0 git diff --quiet --ignore-all-space a trailing-space && + test_expect_code 0 git diff --quiet --ignore-all-space a extra-space && + test_expect_code 1 git diff --quiet --ignore-all-space a never-match + ) +' + test_done diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 4dc8c67..979e983 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -8,7 +8,12 @@ test_expect_success 'setup' ' mkdir a && mkdir b && echo 1 >a/1 && - echo 2 >a/2 + echo 2 >a/2 && + git init repo && + echo 1 >repo/a && + mkdir -p non/git && + echo 1 >non/git/a && + echo 1 >non/git/b ' test_expect_success 'git diff --no-index directories' ' @@ -16,4 +21,12 @@ test_expect_success 'git diff --no-index directories' ' test $? = 1 && test_line_count = 14 cnt ' +test_expect_success 'git diff --no-index relative path outside repo' ' + ( + cd repo && + test_expect_code 0 git diff --no-index a ../non/git/a && + test_expect_code 0 git diff --no-index ../non/git/a ../non/git/b + ) +' + test_done diff --git a/t/t4103-apply-binary.sh b/t/t4103-apply-binary.sh index dbbf56c..99627bc 100755 --- a/t/t4103-apply-binary.sh +++ b/t/t4103-apply-binary.sh @@ -25,10 +25,10 @@ test_expect_success 'setup' " git commit -m 'Initial Version' 2>/dev/null && git checkout -b binary && - perl -pe 'y/x/\000/' <file1 >file3 && + "$PERL_PATH" -pe 'y/x/\000/' <file1 >file3 && cat file3 >file4 && git add file2 && - perl -pe 'y/\000/v/' <file3 >file1 && + "$PERL_PATH" -pe 'y/\000/v/' <file3 >file1 && rm -f file2 && git update-index --add --remove file1 file2 file3 file4 && git commit -m 'Second Version' && diff --git a/t/t4108-apply-threeway.sh b/t/t4108-apply-threeway.sh new file mode 100755 index 0000000..fa5d4ef --- /dev/null +++ b/t/t4108-apply-threeway.sh @@ -0,0 +1,157 @@ +#!/bin/sh + +test_description='git apply --3way' + +. ./test-lib.sh + +create_file () { + for i + do + echo "$i" + done +} + +sanitize_conflicted_diff () { + sed -e ' + /^index /d + s/^\(+[<>][<>][<>][<>]*\) .*/\1/ + ' +} + +test_expect_success setup ' + test_tick && + create_file >one 1 2 3 4 5 6 7 && + cat one >two && + git add one two && + git commit -m initial && + + git branch side && + + test_tick && + create_file >one 1 two 3 4 5 six 7 && + create_file >two 1 two 3 4 5 6 7 && + git commit -a -m master && + + git checkout side && + create_file >one 1 2 3 4 five 6 7 && + create_file >two 1 2 3 4 five 6 7 && + git commit -a -m side && + + git checkout master +' + +test_expect_success 'apply without --3way' ' + git diff side^ side >P.diff && + + # should fail to apply + git reset --hard && + git checkout master^0 && + test_must_fail git apply --index P.diff && + # should leave things intact + git diff-files --exit-code && + git diff-index --exit-code --cached HEAD +' + +test_expect_success 'apply with --3way' ' + # Merging side should be similar to applying this patch + git diff ...side >P.diff && + + # The corresponding conflicted merge + git reset --hard && + git checkout master^0 && + test_must_fail git merge --no-commit side && + git ls-files -s >expect.ls && + git diff HEAD | sanitize_conflicted_diff >expect.diff && + + # should fail to apply + git reset --hard && + git checkout master^0 && + test_must_fail git apply --index --3way P.diff && + git ls-files -s >actual.ls && + git diff HEAD | sanitize_conflicted_diff >actual.diff && + + # The result should resemble the corresponding merge + test_cmp expect.ls actual.ls && + test_cmp expect.diff actual.diff +' + +test_expect_success 'apply with --3way with rerere enabled' ' + git config rerere.enabled true && + + # Merging side should be similar to applying this patch + git diff ...side >P.diff && + + # The corresponding conflicted merge + git reset --hard && + git checkout master^0 && + test_must_fail git merge --no-commit side && + + # Manually resolve and record the resolution + create_file 1 two 3 4 five six 7 >one && + git rerere && + cat one >expect && + + # should fail to apply + git reset --hard && + git checkout master^0 && + test_must_fail git apply --index --3way P.diff && + + # but rerere should have replayed the recorded resolution + test_cmp expect one +' + +test_expect_success 'apply -3 with add/add conflict setup' ' + git reset --hard && + + git checkout -b adder && + create_file 1 2 3 4 5 6 7 >three && + create_file 1 2 3 4 5 6 7 >four && + git add three four && + git commit -m "add three and four" && + + git checkout -b another adder^ && + create_file 1 2 3 4 5 6 7 >three && + create_file 1 2 3 four 5 6 7 >four && + git add three four && + git commit -m "add three and four" && + + # Merging another should be similar to applying this patch + git diff adder...another >P.diff && + + git checkout adder^0 && + test_must_fail git merge --no-commit another && + git ls-files -s >expect.ls && + git diff HEAD | sanitize_conflicted_diff >expect.diff +' + +test_expect_success 'apply -3 with add/add conflict' ' + # should fail to apply ... + git reset --hard && + git checkout adder^0 && + test_must_fail git apply --index --3way P.diff && + # ... and leave conflicts in the index and in the working tree + git ls-files -s >actual.ls && + git diff HEAD | sanitize_conflicted_diff >actual.diff && + + # The result should resemble the corresponding merge + test_cmp expect.ls actual.ls && + test_cmp expect.diff actual.diff +' + +test_expect_success 'apply -3 with add/add conflict (dirty working tree)' ' + # should fail to apply ... + git reset --hard && + git checkout adder^0 && + echo >>four && + cat four >four.save && + cat three >three.save && + git ls-files -s >expect.ls && + test_must_fail git apply --index --3way P.diff && + # ... and should not touch anything + git ls-files -s >actual.ls && + test_cmp expect.ls actual.ls && + test_cmp four.save four && + test_cmp three.save three +' + +test_done diff --git a/t/t4116-apply-reverse.sh b/t/t4116-apply-reverse.sh index 2298ece..fca8153 100755 --- a/t/t4116-apply-reverse.sh +++ b/t/t4116-apply-reverse.sh @@ -12,14 +12,14 @@ test_description='git apply in reverse test_expect_success setup ' for i in a b c d e f g h i j k l m n; do echo $i; done >file1 && - perl -pe "y/ijk/\\000\\001\\002/" <file1 >file2 && + "$PERL_PATH" -pe "y/ijk/\\000\\001\\002/" <file1 >file2 && git add file1 file2 && git commit -m initial && git tag initial && for i in a b c g h i J K L m o n p q; do echo $i; done >file1 && - perl -pe "y/mon/\\000\\001\\002/" <file1 >file2 && + "$PERL_PATH" -pe "y/mon/\\000\\001\\002/" <file1 >file2 && git commit -a -m second && git tag second && diff --git a/t/t4117-apply-reject.sh b/t/t4117-apply-reject.sh index e9ccd16..8e15ecb 100755 --- a/t/t4117-apply-reject.sh +++ b/t/t4117-apply-reject.sh @@ -46,6 +46,14 @@ test_expect_success setup ' cat file1 >saved.file1 ' +test_expect_success 'apply --reject is incompatible with --3way' ' + test_when_finished "cat saved.file1 >file1" && + git diff >patch.0 && + git checkout file1 && + test_must_fail git apply --reject --3way patch.0 && + git diff --exit-code +' + test_expect_success 'apply without --reject should fail' ' if git apply patch.1 diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index 36255d6..3ab670d 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -78,7 +78,7 @@ test_expect_success 'activate rerere, old style (conflicting merge)' ' test_might_fail git config --unset rerere.enabled && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 && grep "^=======\$" $rr/preimage && ! test -f $rr/postimage && @@ -91,7 +91,7 @@ test_expect_success 'rerere.enabled works, too' ' git reset --hard && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 && grep ^=======$ $rr/preimage ' @@ -101,7 +101,7 @@ test_expect_success 'set up rr-cache' ' git config rerere.enabled true && git reset --hard && test_must_fail git merge first && - sha1=$(perl -pe "s/ .*//" .git/MERGE_RR) && + sha1=$("$PERL_PATH" -pe "s/ .*//" .git/MERGE_RR) && rr=.git/rr-cache/$sha1 ' @@ -185,7 +185,7 @@ test_expect_success 'rerere updates postimage timestamp' ' test_expect_success 'rerere clear' ' rm $rr/postimage && - echo "$sha1 a1" | perl -pe "y/\012/\000/" >.git/MERGE_RR && + echo "$sha1 a1" | "$PERL_PATH" -pe "y/\012/\000/" >.git/MERGE_RR && git rerere clear && ! test -d $rr ' diff --git a/t/t4253-am-keep-cr-dos.sh b/t/t4253-am-keep-cr-dos.sh index 735e55d..553fe3e 100755 --- a/t/t4253-am-keep-cr-dos.sh +++ b/t/t4253-am-keep-cr-dos.sh @@ -62,7 +62,7 @@ test_expect_success 'am with dos files config am.keepcr' ' git diff --exit-code master ' -test_expect_success 'am with dos files config am.keepcr overriden by --no-keep-cr' ' +test_expect_success 'am with dos files config am.keepcr overridden by --no-keep-cr' ' git config am.keepcr 1 && git checkout -b dosfiles-conf-keepcr-override initial && git format-patch -k initial..master && @@ -83,7 +83,7 @@ test_expect_success 'am with dos files with --keep-cr continue' ' git diff --exit-code master ' -test_expect_success 'am with unix files config am.keepcr overriden by --no-keep-cr' ' +test_expect_success 'am with unix files config am.keepcr overridden by --no-keep-cr' ' git config am.keepcr 1 && git checkout -b unixfiles-conf-keepcr-override initial && cp -f file1 file && diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index d9d856b..2e52f8b 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -13,9 +13,9 @@ TRASH=`pwd` test_expect_success \ 'setup' \ 'rm -f .git/index* && - perl -e "print \"a\" x 4096;" > a && - perl -e "print \"b\" x 4096;" > b && - perl -e "print \"c\" x 4096;" > c && + "$PERL_PATH" -e "print \"a\" x 4096;" > a && + "$PERL_PATH" -e "print \"b\" x 4096;" > b && + "$PERL_PATH" -e "print \"c\" x 4096;" > c && test-genrandom "seed a" 2097152 > a_big && test-genrandom "seed b" 2097152 > b_big && git update-index --add a a_big b b_big c && @@ -129,7 +129,7 @@ test_expect_success \ cd "$TRASH" test_expect_success 'compare delta flavors' ' - perl -e '\'' + "$PERL_PATH" -e '\'' defined($_ = -s $_) or die for @ARGV; exit 1 if $ARGV[0] <= $ARGV[1]; '\'' test-2-$packname_2.pack test-3-$packname_3.pack @@ -418,4 +418,9 @@ test_expect_success \ 'test_must_fail git index-pack -o bad.idx test-3.pack 2>msg && grep "SHA1 COLLISION FOUND" msg' +test_expect_success \ + 'make sure index-pack detects the SHA1 collision (large blobs)' \ + 'test_must_fail git -c core.bigfilethreshold=1 index-pack -o bad.idx test-3.pack 2>msg && + grep "SHA1 COLLISION FOUND" msg' + test_done diff --git a/t/t5303-pack-corruption-resilience.sh b/t/t5303-pack-corruption-resilience.sh index 5f6cd4f..5b1250f 100755 --- a/t/t5303-pack-corruption-resilience.sh +++ b/t/t5303-pack-corruption-resilience.sh @@ -98,7 +98,7 @@ test_expect_success \ 'create_new_pack && git prune-packed && chmod +w ${pack}.pack && - perl -i.bak -pe "s/ base /abcdef/" ${pack}.pack && + "$PERL_PATH" -i.bak -pe "s/ base /abcdef/" ${pack}.pack && test_must_fail git cat-file blob $blob_1 > /dev/null && test_must_fail git cat-file blob $blob_2 > /dev/null && test_must_fail git cat-file blob $blob_3 > /dev/null' @@ -155,7 +155,7 @@ test_expect_success \ 'create_new_pack && git prune-packed && chmod +w ${pack}.pack && - perl -i.bak -pe "s/ delta1 /abcdefgh/" ${pack}.pack && + "$PERL_PATH" -i.bak -pe "s/ delta1 /abcdefgh/" ${pack}.pack && git cat-file blob $blob_1 > /dev/null && test_must_fail git cat-file blob $blob_2 > /dev/null && test_must_fail git cat-file blob $blob_3 > /dev/null' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 1d1ca98..e80a2af 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -125,6 +125,11 @@ test_expect_success 'single branch object count' ' test_cmp expected count.singlebranch ' +test_expect_success 'single given branch clone' ' + git clone --single-branch --branch A "file://$(pwd)/." branch-a && + test_must_fail git --git-dir=branch-a/.git rev-parse origin/B +' + test_expect_success 'clone shallow' ' git clone --no-single-branch --depth 2 "file://$(pwd)/." shallow ' @@ -276,7 +281,7 @@ test_expect_success 'clone shallow with --branch' ' ' test_expect_success 'clone shallow object count' ' - echo "in-pack: 12" > count3.expected && + echo "in-pack: 6" > count3.expected && GIT_DIR=shallow3/.git git count-objects -v | grep "^in-pack" > count3.actual && test_cmp count3.expected count3.actual diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 6764d51..d16e5d3 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -87,17 +87,15 @@ test_expect_success 'use branch.<name>.remote if possible' ' test_expect_success 'confuses pattern as remote when no remote specified' ' cat >exp <<-\EOF && fatal: '\''refs*master'\'' does not appear to be a git repository - fatal: The remote end hung up unexpectedly + fatal: Could not read from remote repository. + + Please make sure you have the correct access rights + and the repository exists. EOF # - # Do not expect "git ls-remote <pattern>" to work; ls-remote, correctly, - # confuses <pattern> for <remote>. Although ugly, this behaviour is akin - # to the confusion of refspecs for remotes by git-fetch and git-push, - # eg: - # - # $ git fetch branch - # - + # Do not expect "git ls-remote <pattern>" to work; ls-remote needs + # <remote> if you want to feed <pattern>, just like you cannot say + # fetch <branch>. # We could just as easily have used "master"; the "*" emphasizes its # role as a pattern. test_must_fail git ls-remote refs*master >actual 2>&1 && diff --git a/t/t5532-fetch-proxy.sh b/t/t5532-fetch-proxy.sh index 62f2460..5531bd1 100755 --- a/t/t5532-fetch-proxy.sh +++ b/t/t5532-fetch-proxy.sh @@ -15,7 +15,7 @@ test_expect_success 'setup remote repo' ' cat >proxy <<'EOF' #!/bin/sh echo >&2 "proxying for $*" -cmd=`perl -e ' +cmd=`"$PERL_PATH" -e ' read(STDIN, $buf, 4); my $n = hex($buf) - 4; read(STDIN, $buf, $n); diff --git a/t/t5551-http-fetch.sh b/t/t5551-http-fetch.sh index be6094b..fadf2f2 100755 --- a/t/t5551-http-fetch.sh +++ b/t/t5551-http-fetch.sh @@ -130,7 +130,7 @@ test_expect_success EXPENSIVE 'create 50,000 tags in the repo' ' done | git fast-import --export-marks=marks && # now assign tags to all the dangling commits we created above - tag=$(perl -e "print \"bla\" x 30") && + tag=$("$PERL_PATH" -e "print \"bla\" x 30") && sed -e "s/^:\(.\+\) \(.\+\)$/\2 refs\/tags\/$tag-\1/" <marks >>packed-refs ) ' diff --git a/t/t6011-rev-list-with-bad-commit.sh b/t/t6011-rev-list-with-bad-commit.sh index e51eb41..bbb0581 100755 --- a/t/t6011-rev-list-with-bad-commit.sh +++ b/t/t6011-rev-list-with-bad-commit.sh @@ -37,7 +37,7 @@ test_expect_success 'verify number of revisions' \ test_expect_success 'corrupt second commit object' \ ' - perl -i.bak -pe "s/second commit/socond commit/" .git/objects/pack/*.pack && + "$PERL_PATH" -i.bak -pe "s/second commit/socond commit/" .git/objects/pack/*.pack && test_must_fail git fsck --full ' diff --git a/t/t6013-rev-list-reverse-parents.sh b/t/t6013-rev-list-reverse-parents.sh index 59fc2f0..892a537 100755 --- a/t/t6013-rev-list-reverse-parents.sh +++ b/t/t6013-rev-list-reverse-parents.sh @@ -25,7 +25,7 @@ test_expect_success 'set up --reverse example' ' test_expect_success '--reverse --parents --full-history combines correctly' ' git rev-list --parents --full-history master -- foo | - perl -e "print reverse <>" > expected && + "$PERL_PATH" -e "print reverse <>" > expected && git rev-list --reverse --parents --full-history master -- foo \ > actual && test_cmp actual expected @@ -33,7 +33,7 @@ test_expect_success '--reverse --parents --full-history combines correctly' ' test_expect_success '--boundary does too' ' git rev-list --boundary --parents --full-history master ^root -- foo | - perl -e "print reverse <>" > expected && + "$PERL_PATH" -e "print reverse <>" > expected && git rev-list --boundary --reverse --parents --full-history \ master ^root -- foo > actual && test_cmp actual expected diff --git a/t/t7003-filter-branch.sh b/t/t7003-filter-branch.sh index e022773..4d13e10 100755 --- a/t/t7003-filter-branch.sh +++ b/t/t7003-filter-branch.sh @@ -5,7 +5,8 @@ test_description='git filter-branch' test_expect_success 'setup' ' test_commit A && - test_commit B && + GIT_COMMITTER_DATE="@0 +0000" GIT_AUTHOR_DATE="@0 +0000" && + test_commit --notick B && git checkout -b branch B && test_commit D && mkdir dir && diff --git a/t/t7007-show.sh b/t/t7007-show.sh index cce222f..a40cd36 100755 --- a/t/t7007-show.sh +++ b/t/t7007-show.sh @@ -17,4 +17,95 @@ test_expect_success 'showing a tag that point at a missing object' ' test_must_fail git --no-pager show foo-tag ' +test_expect_success 'set up a bit of history' ' + test_commit main1 && + test_commit main2 && + test_commit main3 && + git tag -m "annotated tag" annotated && + git checkout -b side HEAD^^ && + test_commit side2 && + test_commit side3 +' + +test_expect_success 'showing two commits' ' + cat >expect <<-EOF && + commit $(git rev-parse main2) + commit $(git rev-parse main3) + EOF + git show main2 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (linear)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show main1..main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (Y shape, ^ first)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show ^side3 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing a range walks (Y shape, ^ last)' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show main3 ^side3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing with -N walks' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show -2 main3 >actual && + grep ^commit actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing annotated tag' ' + cat >expect <<-EOF && + tag annotated + commit $(git rev-parse annotated^{commit}) + EOF + git show annotated >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing annotated tag plus commit' ' + cat >expect <<-EOF && + tag annotated + commit $(git rev-parse annotated^{commit}) + commit $(git rev-parse side3) + EOF + git show annotated side3 >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + +test_expect_success 'showing range' ' + cat >expect <<-EOF && + commit $(git rev-parse main3) + commit $(git rev-parse main2) + EOF + git show ^side3 annotated >actual && + grep -E "^(commit|tag)" actual >actual.filtered && + test_cmp expect actual.filtered +' + test_done diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index b8cb490..f4f38a5 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -30,6 +30,9 @@ test_expect_success 'Report new path with conflict' ' cat >expect <<EOF # On branch side +# You have unmerged paths. +# (fix conflicts and run "git commit") +# # Unmerged paths: # (use "git add/rm <file>..." as appropriate to mark resolution) # @@ -118,4 +121,97 @@ test_expect_success 'git diff-index --cached -C shows 2 copies + 1 unmerged' ' test_cmp expected actual ' + +test_expect_success 'status when conflicts with add and rm advice (deleted by them)' ' + git reset --hard && + git checkout master && + test_commit init main.txt init && + git checkout -b second_branch && + git rm main.txt && + git commit -m "main.txt deleted on second_branch" && + test_commit second conflict.txt second && + git checkout master && + test_commit on_second main.txt on_second && + test_commit master conflict.txt master && + test_must_fail git merge second_branch && + cat >expected <<-\EOF && + # On branch master + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add/rm <file>..." as appropriate to mark resolution) + # + # both added: conflict.txt + # deleted by them: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for conflicts' ' + git reset --hard && + git checkout -b conflict && + test_commit one main.txt one && + git branch conflict_second && + git mv main.txt sub_master.txt && + git commit -m "main.txt renamed in sub_master.txt" && + git checkout conflict_second && + git mv main.txt sub_second.txt && + git commit -m "main.txt renamed in sub_second.txt" +' + + +test_expect_success 'status when conflicts with add and rm advice (both deleted)' ' + test_must_fail git merge conflict && + cat >expected <<-\EOF && + # On branch conflict_second + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add/rm <file>..." as appropriate to mark resolution) + # + # both deleted: main.txt + # added by them: sub_master.txt + # added by us: sub_second.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when conflicts with only rm advice (both deleted)' ' + git reset --hard conflict_second && + test_must_fail git merge conflict && + git add sub_master.txt && + git add sub_second.txt && + cat >expected <<-\EOF && + # On branch conflict_second + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Changes to be committed: + # + # new file: sub_master.txt + # + # Unmerged paths: + # (use "git rm <file>..." to mark resolution) + # + # both deleted: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual && + git reset --hard && + git checkout master +' + + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 81827e6..c73bec9 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -483,21 +483,72 @@ test_expect_success 'set up for relative path tests' ' git add sub && git config -f .gitmodules submodule.sub.path sub && git config -f .gitmodules submodule.sub.url ../subrepo && - cp .git/config pristine-.git-config + cp .git/config pristine-.git-config && + cp .gitmodules pristine-.gitmodules ) ' -test_expect_success 'relative path works with URL' ' +test_expect_success '../subrepo works with URL - ssh://hostname/repo' ' ( cd reltest && cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && git config remote.origin.url ssh://hostname/repo && git submodule init && test "$(git config submodule.sub.url)" = ssh://hostname/subrepo ) ' -test_expect_success 'relative path works with user@host:path' ' +test_expect_success '../subrepo works with port-qualified URL - ssh://hostname:22/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ssh://hostname:22/repo && + git submodule init && + test "$(git config submodule.sub.url)" = ssh://hostname:22/subrepo + ) +' + +# About the choice of the path in the next test: +# - double-slash side-steps path mangling issues on Windows +# - it is still an absolute local path +# - there cannot be a server with a blank in its name just in case the +# path is used erroneously to access a //server/share style path +test_expect_success '../subrepo path works with local path - //somewhere else/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url "//somewhere else/repo" && + git submodule init && + test "$(git config submodule.sub.url)" = "//somewhere else/subrepo" + ) +' + +test_expect_success '../subrepo works with file URL - file:///tmp/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url file:///tmp/repo && + git submodule init && + test "$(git config submodule.sub.url)" = file:///tmp/subrepo + ) +' + +test_expect_success '../subrepo works with helper URL- helper:://hostname/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url helper:://hostname/repo && + git submodule init && + test "$(git config submodule.sub.url)" = helper:://hostname/subrepo + ) +' + +test_expect_success '../subrepo works with scp-style URL - user@host:repo' ' ( cd reltest && cp pristine-.git-config .git/config && @@ -507,6 +558,98 @@ test_expect_success 'relative path works with user@host:path' ' ) ' +test_expect_success '../subrepo works with scp-style URL - user@host:path/to/repo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url user@host:path/to/repo && + git submodule init && + test "$(git config submodule.sub.url)" = user@host:path/to/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url foo && + # actual: fails with an error + git submodule init && + test "$(git config submodule.sub.url)" = subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = foo/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ./foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ./foo && + git submodule init && + test "$(git config submodule.sub.url)" = subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ./foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ./foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = foo/subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ../foo' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ../foo && + git submodule init && + test "$(git config submodule.sub.url)" = ../subrepo + ) +' + +test_expect_success '../subrepo works with relative local path - ../foo/bar' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + git config remote.origin.url ../foo/bar && + git submodule init && + test "$(git config submodule.sub.url)" = ../foo/subrepo + ) +' + +test_expect_success '../bar/a/b/c works with relative local path - ../foo/bar.git' ' + ( + cd reltest && + cp pristine-.git-config .git/config && + cp pristine-.gitmodules .gitmodules && + mkdir -p a/b/c && + (cd a/b/c; git init) && + git config remote.origin.url ../foo/bar.git && + git submodule add ../bar/a/b/c ./a/b/c && + git submodule init && + test "$(git config submodule.a/b/c.url)" = ../foo/bar/a/b/c + ) +' + test_expect_success 'moving the superproject does not break submodules' ' ( cd addtest && diff --git a/t/t7403-submodule-sync.sh b/t/t7403-submodule-sync.sh index 3620215..524d5c1 100755 --- a/t/t7403-submodule-sync.sh +++ b/t/t7403-submodule-sync.sh @@ -26,7 +26,9 @@ test_expect_success setup ' (cd super-clone && git submodule update --init) && git clone super empty-clone && (cd empty-clone && git submodule init) && - git clone super top-only-clone + git clone super top-only-clone && + git clone super relative-clone && + (cd relative-clone && git submodule update --init) ' test_expect_success 'change submodule' ' @@ -86,4 +88,90 @@ test_expect_success '"git submodule sync" should not vivify uninteresting submod ) ' +test_expect_success '"git submodule sync" handles origin URL of the form foo' ' + (cd relative-clone && + git remote set-url origin foo && + git submodule sync && + (cd submodule && + #actual fails with: "cannot strip off url foo + test "$(git config remote.origin.url)" = "../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form foo/bar' ' + (cd relative-clone && + git remote set-url origin foo/bar && + git submodule sync && + (cd submodule && + #actual foo/submodule + test "$(git config remote.origin.url)" = "../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ./foo' ' + (cd relative-clone && + git remote set-url origin ./foo && + git submodule sync && + (cd submodule && + #actual ./submodule + test "$(git config remote.origin.url)" = "../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ./foo/bar' ' + (cd relative-clone && + git remote set-url origin ./foo/bar && + git submodule sync && + (cd submodule && + #actual ./foo/submodule + test "$(git config remote.origin.url)" = "../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo' ' + (cd relative-clone && + git remote set-url origin ../foo && + git submodule sync && + (cd submodule && + #actual ../submodule + test "$(git config remote.origin.url)" = "../../submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo/bar' ' + (cd relative-clone && + git remote set-url origin ../foo/bar && + git submodule sync && + (cd submodule && + #actual ../foo/submodule + test "$(git config remote.origin.url)" = "../../foo/submodule" + ) + ) +' + +test_expect_success '"git submodule sync" handles origin URL of the form ../foo/bar with deeply nested submodule' ' + (cd relative-clone && + git remote set-url origin ../foo/bar && + mkdir -p a/b/c && + ( cd a/b/c && + git init && + :> .gitignore && + git add .gitignore && + test_tick && + git commit -m "initial commit" ) && + git submodule add ../bar/a/b/c ./a/b/c && + git submodule sync && + (cd a/b/c && + #actual ../foo/bar/a/b/c + test "$(git config remote.origin.url)" = "../../../../foo/bar/a/b/c" + ) + ) +' + + test_done diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index dcb195b..ce61d4c 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -636,4 +636,17 @@ test_expect_success 'submodule update properly revives a moved submodule' ' ) ' +test_expect_success SYMLINKS 'submodule update can handle symbolic links in pwd' ' + mkdir -p linked/dir && + ln -s linked/dir linkto && + ( + cd linkto && + git clone "$TRASH_DIRECTORY"/super_update_r2 super && + ( + cd super && + git submodule update --init --recursive + ) + ) +' + test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index b20ca0e..195e747 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -108,6 +108,16 @@ test_expect_success 'amend commit' ' EDITOR=./editor git commit --amend ' +test_expect_success 'amend --only ignores staged contents' ' + cp file file.expect && + echo changed >file && + git add file && + git commit --no-edit --amend --only && + git cat-file blob HEAD:file >file.actual && + test_cmp file.expect file.actual && + git diff --exit-code +' + test_expect_success 'set up editor' ' cat >editor <<-\EOF && #!/bin/sh @@ -138,6 +148,21 @@ test_expect_success '--amend --edit' ' test_cmp expect msg ' +test_expect_success '--amend --edit of empty message' ' + cat >replace <<-\EOF && + #!/bin/sh + echo "amended" >"$1" + EOF + chmod 755 replace && + git commit --allow-empty --allow-empty-message -m "" && + echo more bongo >file && + git add file && + EDITOR=./replace git commit --edit --amend && + git diff-tree -s --format=%s HEAD >msg && + ./replace expect && + test_cmp expect msg +' + test_expect_success '-m --edit' ' echo amended >expect && git commit --allow-empty -m buffer && @@ -487,4 +512,16 @@ test_expect_success 'amend can copy notes' ' ' +test_expect_success 'commit a file whose name is a dash' ' + git reset --hard && + for i in 1 2 3 4 5 + do + echo $i + done >./- && + git add ./- && + test_tick && + git commit -m "add dash" >output </dev/null && + test_i18ngrep " changed, 5 insertions" output +' + test_done diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 28e1848..c206f47 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -941,7 +941,7 @@ test_expect_success 'status -s submodule summary (clean submodule)' ' test_expect_success 'status -z implies porcelain' ' git status --porcelain | - perl -pe "s/\012/\000/g" >expect && + "$PERL_PATH" -pe "s/\012/\000/g" >expect && git status -z >output && test_cmp expect output ' diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh new file mode 100755 index 0000000..b3f6eb9 --- /dev/null +++ b/t/t7512-status-help.sh @@ -0,0 +1,649 @@ +#!/bin/sh +# +# Copyright (c) 2012 Valentin Duperray, Lucien Kong, Franck Jonas, +# Thomas Nguy, Khoi Nguyen +# Grenoble INP Ensimag +# + +test_description='git status advices' + +. ./test-lib.sh + +. "$TEST_DIRECTORY"/lib-rebase.sh + +set_fake_editor + +test_expect_success 'prepare for conflicts' ' + test_commit init main.txt init && + git branch conflicts && + test_commit on_master main.txt on_master && + git checkout conflicts && + test_commit on_conflicts main.txt on_conflicts +' + + +test_expect_success 'status when conflicts unresolved' ' + test_must_fail git merge master && + cat >expected <<-\EOF && + # On branch conflicts + # You have unmerged paths. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when conflicts resolved before commit' ' + git reset --hard conflicts && + test_must_fail git merge master && + echo one >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # On branch conflicts + # All conflicts fixed but you are still merging. + # (use "git commit" to conclude merge) + # + # Changes to be committed: + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for rebase conflicts' ' + git reset --hard master && + git checkout -b rebase_conflicts && + test_commit one_rebase main.txt one && + test_commit two_rebase main.txt two && + test_commit three_rebase main.txt three +' + + +test_expect_success 'status when rebase in progress before resolving conflicts' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (fix conflicts and then run "git rebase --continue") + # (use "git rebase --skip" to skip this patch) + # (use "git rebase --abort" to check out the original branch) + # + # Unmerged paths: + # (use "git reset HEAD <file>..." to unstage) + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebase in progress before rebase --continue' ' + git reset --hard rebase_conflicts && + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + echo three >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (all conflicts fixed: run "git rebase --continue") + # + # Changes to be committed: + # (use "git reset HEAD <file>..." to unstage) + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for rebase_i_conflicts' ' + git reset --hard master && + git checkout -b rebase_i_conflicts && + test_commit one_unmerge main.txt one_unmerge && + git branch rebase_i_conflicts_second && + test_commit one_master main.txt one_master && + git checkout rebase_i_conflicts_second && + test_commit one_second main.txt one_second +' + + +test_expect_success 'status during rebase -i when conflicts unresolved' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i rebase_i_conflicts && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (fix conflicts and then run "git rebase --continue") + # (use "git rebase --skip" to skip this patch) + # (use "git rebase --abort" to check out the original branch) + # + # Unmerged paths: + # (use "git reset HEAD <file>..." to unstage) + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status during rebase -i after resolving conflicts' ' + git reset --hard rebase_i_conflicts_second && + test_when_finished "git rebase --abort" && + test_must_fail git rebase -i rebase_i_conflicts && + git add main.txt && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # (all conflicts fixed: run "git rebase --continue") + # + # Changes to be committed: + # (use "git reset HEAD <file>..." to unstage) + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebasing -i in edit mode' ' + git reset --hard master && + git checkout -b rebase_i_edit && + test_commit one_rebase_i main.txt one && + test_commit two_rebase_i main.txt two && + test_commit three_rebase_i main.txt three && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~2 && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when splitting a commit' ' + git reset --hard master && + git checkout -b split_commit && + test_commit one_split main.txt one && + test_commit two_split main.txt two && + test_commit three_split main.txt three && + test_commit four_split main.txt four && + FAKE_LINES="1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status after editing the last commit with --amend during a rebase -i' ' + git reset --hard master && + git checkout -b amend_last && + test_commit one_amend main.txt one && + test_commit two_amend main.txt two && + test_commit three_amend main.txt three && + test_commit four_amend main.txt four && + FAKE_LINES="1 2 edit 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "foo" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for several edits' ' + git reset --hard master && + git checkout -b several_edits && + test_commit one_edits main.txt one && + test_commit two_edits main.txt two && + test_commit three_edits main.txt three && + test_commit four_edits main.txt four +' + + +test_expect_success 'status: (continue first edit) second edit' ' + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (continue first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (continue first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git rebase --continue && + git commit --amend -m "foo" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "a" && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "b" && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (amend first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git commit --amend -m "c" && + git rebase --continue && + git commit --amend -m "d" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit -m "e" && + git rebase --continue && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit and split' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit --amend -m "f" && + git rebase --continue && + git reset HEAD^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently splitting a commit during a rebase. + # (Once your working directory is clean, run "git rebase --continue") + # + # Changes not staged for commit: + # (use "git add <file>..." to update what will be committed) + # (use "git checkout -- <file>..." to discard changes in working directory) + # + # modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status: (split first edit) second edit and amend' ' + git reset --hard several_edits && + FAKE_LINES="edit 1 edit 2 3" && + export FAKE_LINES && + test_when_finished "git rebase --abort" && + git rebase -i HEAD~3 && + git reset HEAD^ && + git add main.txt && + git commit --amend -m "g" && + git rebase --continue && + git commit --amend -m "h" && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently editing a commit during a rebase. + # (use "git commit --amend" to amend the current commit) + # (use "git rebase --continue" once you are satisfied with your changes) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare am_session' ' + git reset --hard master && + git checkout -b am_session && + test_commit one_am one.txt "one" && + test_commit two_am two.txt "two" && + test_commit three_am three.txt "three" +' + + +test_expect_success 'status in an am session: file already exists' ' + git checkout -b am_already_exists && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -1 -oMaildir && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_already_exists + # You are in the middle of an am session. + # (fix conflicts and then run "git am --resolved") + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status in an am session: file does not exist' ' + git reset --hard am_session && + git checkout -b am_not_exists && + git rm three.txt && + git commit -m "delete three.txt" && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -1 -oMaildir && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_not_exists + # You are in the middle of an am session. + # (fix conflicts and then run "git am --resolved") + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status in an am session: empty patch' ' + git reset --hard am_session && + git checkout -b am_empty && + test_when_finished "rm Maildir/* && git am --abort" && + git format-patch -3 -oMaildir && + git rm one.txt two.txt three.txt && + git commit -m "delete all am_empty" && + echo error >Maildir/0002-two_am.patch && + test_must_fail git am Maildir/*.patch && + cat >expected <<-\EOF && + # On branch am_empty + # You are in the middle of an am session. + # The current patch is empty. + # (use "git am --skip" to skip this patch) + # (use "git am --abort" to restore the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when bisecting' ' + git reset --hard master && + git checkout -b bisect && + test_commit one_bisect main.txt one && + test_commit two_bisect main.txt two && + test_commit three_bisect main.txt three && + test_when_finished "git bisect reset" && + git bisect start && + git bisect bad && + git bisect good one_bisect && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently bisecting. + # (use "git bisect reset" to get back to the original branch) + # + nothing to commit (use -u to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when rebase conflicts with statushints disabled' ' + git reset --hard master && + git checkout -b statushints_disabled && + test_when_finished "git config --local advice.statushints true" && + git config --local advice.statushints false && + test_commit one_statushints main.txt one && + test_commit two_statushints main.txt two && + test_commit three_statushints main.txt three && + test_when_finished "git rebase --abort" && + test_must_fail git rebase HEAD^ --onto HEAD^^ && + cat >expected <<-\EOF && + # Not currently on any branch. + # You are currently rebasing. + # + # Unmerged paths: + # both modified: main.txt + # + no changes added to commit + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'prepare for cherry-pick conflicts' ' + git reset --hard master && + git checkout -b cherry_branch && + test_commit one_cherry main.txt one && + test_commit two_cherries main.txt two && + git checkout -b cherry_branch_second && + test_commit second_cherry main.txt second && + git checkout cherry_branch && + test_commit three_cherries main.txt three +' + + +test_expect_success 'status when cherry-picking before resolving conflicts' ' + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second && + cat >expected <<-\EOF && + # On branch cherry_branch + # You are currently cherry-picking. + # (fix conflicts and run "git commit") + # + # Unmerged paths: + # (use "git add <file>..." to mark resolution) + # + # both modified: main.txt + # + no changes added to commit (use "git add" and/or "git commit -a") + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_expect_success 'status when cherry-picking after resolving conflicts' ' + git reset --hard cherry_branch && + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second && + echo end >main.txt && + git add main.txt && + cat >expected <<-\EOF && + # On branch cherry_branch + # You are currently cherry-picking. + # (all conflicts fixed: run "git commit") + # + # Changes to be committed: + # + # modified: main.txt + # + # Untracked files not listed (use -u option to show untracked files) + EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + + +test_done diff --git a/t/t8006-blame-textconv.sh b/t/t8006-blame-textconv.sh index c3c22f7..bf6caa4 100755 --- a/t/t8006-blame-textconv.sh +++ b/t/t8006-blame-textconv.sh @@ -10,7 +10,7 @@ find_blame() { cat >helper <<'EOF' #!/bin/sh grep -q '^bin: ' "$1" || { echo "E: $1 is not \"binary\" file" 1>&2; exit 1; } -perl -p -e 's/^bin: /converted: /' "$1" +"$PERL_PATH" -p -e 's/^bin: /converted: /' "$1" EOF chmod +x helper diff --git a/t/t9129-git-svn-i18n-commitencoding.sh b/t/t9129-git-svn-i18n-commitencoding.sh index 8cfdfe7..9a40f1e 100755 --- a/t/t9129-git-svn-i18n-commitencoding.sh +++ b/t/t9129-git-svn-i18n-commitencoding.sh @@ -29,7 +29,7 @@ fi compare_svn_head_with () { # extract just the log message and strip out committer info. # don't use --limit here since svn 1.1.x doesn't have it, - LC_ALL="$a_utf8_locale" svn log `git svn info --url` | perl -w -e ' + LC_ALL="$a_utf8_locale" svn log `git svn info --url` | "$PERL_PATH" -w -e ' use bytes; $/ = ("-"x72) . "\n"; my @x = <STDIN>; diff --git a/t/t9137-git-svn-dcommit-clobber-series.sh b/t/t9137-git-svn-dcommit-clobber-series.sh index d60da63..c17aa31 100755 --- a/t/t9137-git-svn-dcommit-clobber-series.sh +++ b/t/t9137-git-svn-dcommit-clobber-series.sh @@ -20,8 +20,8 @@ test_expect_success '(supposedly) non-conflicting change from SVN' ' test x"`sed -n -e 61p < file`" = x61 && svn_cmd co "$svnrepo" tmp && (cd tmp && - perl -i.bak -p -e "s/^58$/5588/" file && - perl -i.bak -p -e "s/^61$/6611/" file && + "$PERL_PATH" -i.bak -p -e "s/^58$/5588/" file && + "$PERL_PATH" -i.bak -p -e "s/^61$/6611/" file && poke file && test x"`sed -n -e 58p < file`" = x5588 && test x"`sed -n -e 61p < file`" = x6611 && @@ -40,8 +40,8 @@ test_expect_success 'some unrelated changes to git' " test_expect_success 'change file but in unrelated area' " test x\"\`sed -n -e 4p < file\`\" = x4 && test x\"\`sed -n -e 7p < file\`\" = x7 && - perl -i.bak -p -e 's/^4\$/4444/' file && - perl -i.bak -p -e 's/^7\$/7777/' file && + "$PERL_PATH" -i.bak -p -e 's/^4\$/4444/' file && + "$PERL_PATH" -i.bak -p -e 's/^7\$/7777/' file && test x\"\`sed -n -e 4p < file\`\" = x4444 && test x\"\`sed -n -e 7p < file\`\" = x7777 && git commit -m '4 => 4444, 7 => 7777' file && diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 2aa1824..2fcf269 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -12,7 +12,7 @@ test_description='test git fast-import utility' # This could be written as "head -c $1", but IRIX "head" does not # support the -c option. head_c () { - perl -e ' + "$PERL_PATH" -e ' my $len = $ARGV[1]; while ($len > 0) { my $s; @@ -2117,7 +2117,7 @@ test_expect_success \ grep :1 git.marks' test_expect_success \ - 'R: export-marks options can be overriden by commandline options' \ + 'R: export-marks options can be overridden by commandline options' \ 'cat input | git fast-import --export-marks=other.marks && grep :1 other.marks' diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index b00196b..3e821f9 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -424,13 +424,13 @@ test_expect_success 'fast-export quotes pathnames' ' --cacheinfo 100644 $blob "path with \\backslash" \ --cacheinfo 100644 $blob "path with space" && git commit -m addition && - git ls-files -z -s | perl -0pe "s{\\t}{$&subdir/}" >index && + git ls-files -z -s | "$PERL_PATH" -0pe "s{\\t}{$&subdir/}" >index && git read-tree --empty && git update-index -z --index-info <index && git commit -m rename && git read-tree --empty && git commit -m deletion && - git fast-export HEAD >export.out && + git fast-export -M HEAD >export.out && git rev-list HEAD >expect && git init result && cd result && diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 0f410c4..b7ad716 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -45,7 +45,8 @@ test_expect_success 'git p4 sync uninitialized repo' ' test_when_finished cleanup_git && ( cd "$git" && - test_must_fail git p4 sync + test_must_fail git p4 sync 2>errs && + test_i18ngrep "Perhaps you never did" errs ) ' @@ -126,150 +127,24 @@ test_expect_success 'clone two dirs, @all, conflicting files' ' ' test_expect_success 'exit when p4 fails to produce marshaled output' ' - badp4dir="$TRASH_DIRECTORY/badp4dir" && - mkdir "$badp4dir" && - test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" && - cat >"$badp4dir"/p4 <<-EOF && + mkdir badp4dir && + test_when_finished "rm badp4dir/p4 && rmdir badp4dir" && + cat >badp4dir/p4 <<-EOF && #!$SHELL_PATH exit 1 EOF - chmod 755 "$badp4dir"/p4 && - PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? && - test $retval -eq 1 && - test_must_fail grep -q Traceback errs -' - -test_expect_success 'add p4 files with wildcards in the names' ' - ( - cd "$cli" && - echo file-wild-hash >file-wild#hash && - echo file-wild-star >file-wild\*star && - echo file-wild-at >file-wild@at && - echo file-wild-percent >file-wild%percent && - p4 add -f file-wild* && - p4 submit -d "file wildcards" - ) -' - -test_expect_success 'wildcard files git p4 clone' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - test -f file-wild#hash && - test -f file-wild\*star && - test -f file-wild@at && - test -f file-wild%percent - ) -' - -test_expect_success 'wildcard files submit back to p4, add' ' - test_when_finished cleanup_git && - git p4 clone --dest="$git" //depot && - ( - cd "$git" && - echo git-wild-hash >git-wild#hash && - echo git-wild-star >git-wild\*star && - echo git-wild-at >git-wild@at && - echo git-wild-percent >git-wild%percent && - git add git-wild* && - git commit -m "add some wildcard filenames" && - git config git-p4.skipSubmitEdit true && - git p4 submit - ) && - ( - cd "$cli" && - test_path_is_file git-wild#hash && - test_path_is_file git-wild\*star && - test_path_is_file git-wild@at && - test_path_is_file git-wild%percent - ) -' - -test_expect_success 'wildcard files submit back to p4, modify' ' - test_when_finished cleanup_git && - git p4 clone --dest="$git" //depot && - ( - cd "$git" && - echo new-line >>git-wild#hash && - echo new-line >>git-wild\*star && - echo new-line >>git-wild@at && - echo new-line >>git-wild%percent && - git add git-wild* && - git commit -m "modify the wildcard files" && - git config git-p4.skipSubmitEdit true && - git p4 submit - ) && - ( - cd "$cli" && - test_line_count = 2 git-wild#hash && - test_line_count = 2 git-wild\*star && - test_line_count = 2 git-wild@at && - test_line_count = 2 git-wild%percent - ) -' - -test_expect_success 'wildcard files submit back to p4, copy' ' - test_when_finished cleanup_git && - git p4 clone --dest="$git" //depot && + chmod 755 badp4dir/p4 && ( - cd "$git" && - cp file2 git-wild-cp#hash && - git add git-wild-cp#hash && - cp git-wild\*star file-wild-3 && - git add file-wild-3 && - git commit -m "wildcard copies" && - git config git-p4.detectCopies true && - git config git-p4.detectCopiesHarder true && - git config git-p4.skipSubmitEdit true && - git p4 submit + PATH="$TRASH_DIRECTORY/badp4dir:$PATH" && + export PATH && + test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 ) && - ( - cd "$cli" && - test_path_is_file git-wild-cp#hash && - test_path_is_file file-wild-3 - ) -' - -test_expect_success 'wildcard files submit back to p4, rename' ' - test_when_finished cleanup_git && - git p4 clone --dest="$git" //depot && - ( - cd "$git" && - git mv git-wild@at file-wild-4 && - git mv file-wild-3 git-wild-cp%percent && - git commit -m "wildcard renames" && - git config git-p4.detectRenames true && - git config git-p4.skipSubmitEdit true && - git p4 submit - ) && - ( - cd "$cli" && - test_path_is_missing git-wild@at && - test_path_is_file git-wild-cp%percent - ) -' - -test_expect_success 'wildcard files submit back to p4, delete' ' - test_when_finished cleanup_git && - git p4 clone --dest="$git" //depot && - ( - cd "$git" && - git rm git-wild* && - git commit -m "delete the wildcard files" && - git config git-p4.skipSubmitEdit true && - git p4 submit - ) && - ( - cd "$cli" && - test_path_is_missing git-wild#hash && - test_path_is_missing git-wild\*star && - test_path_is_missing git-wild@at && - test_path_is_missing git-wild%percent - ) + cat errs && + ! test_i18ngrep Traceback errs ' test_expect_success 'clone bare' ' + rm -rf "$git" && git p4 clone --dest="$git" --bare //depot && test_when_finished cleanup_git && ( @@ -280,138 +155,6 @@ test_expect_success 'clone bare' ' ) ' -p4_add_user() { - name=$1 fullname=$2 && - p4 user -f -i <<-EOF && - User: $name - Email: $name@localhost - FullName: $fullname - EOF - p4 passwd -P secret $name -} - -p4_grant_admin() { - name=$1 && - { - p4 protect -o && - echo " admin user $name * //depot/..." - } | p4 protect -i -} - -p4_check_commit_author() { - file=$1 user=$2 && - p4 changes -m 1 //depot/$file | grep -q $user -} - -make_change_by_user() { - file=$1 name=$2 email=$3 && - echo "username: a change by $name" >>"$file" && - git add "$file" && - git commit --author "$name <$email>" -m "a change by $name" -} - -# Test username support, submitting as user 'alice' -test_expect_success 'preserve users' ' - p4_add_user alice Alice && - p4_add_user bob Bob && - p4_grant_admin alice && - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - echo "username: a change by alice" >>file1 && - echo "username: a change by bob" >>file2 && - git commit --author "Alice <alice@localhost>" -m "a change by alice" file1 && - git commit --author "Bob <bob@localhost>" -m "a change by bob" file2 && - git config git-p4.skipSubmitEditCheck true && - P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user && - p4_check_commit_author file1 alice && - p4_check_commit_author file2 bob - ) -' - -# Test username support, submitting as bob, who lacks admin rights. Should -# not submit change to p4 (git diff should show deltas). -test_expect_success 'refuse to preserve users without perms' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - echo "username-noperms: a change by alice" >>file1 && - git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 && - P4EDITOR=touch P4USER=bob P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - test_must_fail git p4 commit --preserve-user && - ! git diff --exit-code HEAD..p4/master - ) -' - -# What happens with unknown author? Without allowMissingP4Users it should fail. -test_expect_success 'preserve user where author is unknown to p4' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - echo "username-bob: a change by bob" >>file1 && - git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 && - echo "username-unknown: a change by charlie" >>file1 && - git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 && - P4EDITOR=touch P4USER=alice P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - test_must_fail git p4 commit --preserve-user && - ! git diff --exit-code HEAD..p4/master && - - echo "$0: repeat with allowMissingP4Users enabled" && - git config git-p4.allowMissingP4Users true && - git config git-p4.preserveUser true && - git p4 commit && - git diff --exit-code HEAD..p4/master && - p4_check_commit_author file1 alice - ) -' - -# If we're *not* using --preserve-user, git p4 should warn if we're submitting -# changes that are not all ours. -# Test: user in p4 and user unknown to p4. -# Test: warning disabled and user is the same. -test_expect_success 'not preserving user with mixed authorship' ' - git p4 clone --dest="$git" //depot && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEditCheck true && - p4_add_user derek Derek && - - make_change_by_user usernamefile3 Derek derek@localhost && - P4EDITOR=cat P4USER=alice P4PASSWD=secret && - export P4EDITOR P4USER P4PASSWD && - git p4 commit |\ - grep "git author derek@localhost does not match" && - - make_change_by_user usernamefile3 Charlie charlie@localhost && - git p4 commit |\ - grep "git author charlie@localhost does not match" && - - make_change_by_user usernamefile3 alice alice@localhost && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && - - git config git-p4.skipUserNameCheck true && - make_change_by_user usernamefile3 Charlie charlie@localhost && - git p4 commit |\ - test_must_fail grep "git author.*does not match" && - - p4_check_commit_author usernamefile3 alice - ) -' - -marshal_dump() { - what=$1 - "$PYTHON_PATH" -c 'import marshal, sys; d = marshal.load(sys.stdin); print d["'$what'"]' -} - # Sleep a bit so that the top-most p4 change did not happen "now". Then # import the repo and make sure that the initial import has the same time # as the top-most change. @@ -429,146 +172,6 @@ test_expect_success 'initial import time from top change time' ' ) ' -# Rename a file and confirm that rename is not detected in P4. -# Rename the new file again with detectRenames option enabled and confirm that -# this is detected in P4. -# Rename the new file again adding an extra line, configure a big threshold in -# detectRenames and confirm that rename is not detected in P4. -# Repeat, this time with a smaller threshold and confirm that the rename is -# detected in P4. -test_expect_success 'detect renames' ' - git p4 clone --dest="$git" //depot@all && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEdit true && - - git mv file1 file4 && - git commit -a -m "Rename file1 to file4" && - git diff-tree -r -M HEAD && - git p4 submit && - p4 filelog //depot/file4 && - p4 filelog //depot/file4 | test_must_fail grep -q "branch from" && - - git mv file4 file5 && - git commit -a -m "Rename file4 to file5" && - git diff-tree -r -M HEAD && - git config git-p4.detectRenames true && - git p4 submit && - p4 filelog //depot/file5 && - p4 filelog //depot/file5 | grep -q "branch from //depot/file4" && - - git mv file5 file6 && - echo update >>file6 && - git add file6 && - git commit -a -m "Rename file5 to file6 with changes" && - git diff-tree -r -M HEAD && - level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && - test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && - git config git-p4.detectRenames $(($level + 2)) && - git p4 submit && - p4 filelog //depot/file6 && - p4 filelog //depot/file6 | test_must_fail grep -q "branch from" && - - git mv file6 file7 && - echo update >>file7 && - git add file7 && - git commit -a -m "Rename file6 to file7 with changes" && - git diff-tree -r -M HEAD && - level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && - test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && - git config git-p4.detectRenames $(($level - 2)) && - git p4 submit && - p4 filelog //depot/file7 && - p4 filelog //depot/file7 | grep -q "branch from //depot/file6" - ) -' - -# Copy a file and confirm that copy is not detected in P4. -# Copy a file with detectCopies option enabled and confirm that copy is not -# detected in P4. -# Modify and copy a file with detectCopies option enabled and confirm that copy -# is detected in P4. -# Copy a file with detectCopies and detectCopiesHarder options enabled and -# confirm that copy is detected in P4. -# Modify and copy a file, configure a bigger threshold in detectCopies and -# confirm that copy is not detected in P4. -# Modify and copy a file, configure a smaller threshold in detectCopies and -# confirm that copy is detected in P4. -test_expect_success 'detect copies' ' - git p4 clone --dest="$git" //depot@all && - test_when_finished cleanup_git && - ( - cd "$git" && - git config git-p4.skipSubmitEdit true && - - cp file2 file8 && - git add file8 && - git commit -a -m "Copy file2 to file8" && - git diff-tree -r -C HEAD && - git p4 submit && - p4 filelog //depot/file8 && - p4 filelog //depot/file8 | test_must_fail grep -q "branch from" && - - cp file2 file9 && - git add file9 && - git commit -a -m "Copy file2 to file9" && - git diff-tree -r -C HEAD && - git config git-p4.detectCopies true && - git p4 submit && - p4 filelog //depot/file9 && - p4 filelog //depot/file9 | test_must_fail grep -q "branch from" && - - echo "file2" >>file2 && - cp file2 file10 && - git add file2 file10 && - git commit -a -m "Modify and copy file2 to file10" && - git diff-tree -r -C HEAD && - git p4 submit && - p4 filelog //depot/file10 && - p4 filelog //depot/file10 | grep -q "branch from //depot/file" && - - cp file2 file11 && - git add file11 && - git commit -a -m "Copy file2 to file11" && - git diff-tree -r -C --find-copies-harder HEAD && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopiesHarder true && - git p4 submit && - p4 filelog //depot/file11 && - p4 filelog //depot/file11 | grep -q "branch from //depot/file" && - - cp file2 file12 && - echo "some text" >>file12 && - git add file12 && - git commit -a -m "Copy file2 to file12 with changes" && - git diff-tree -r -C --find-copies-harder HEAD && - level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && - test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopies $(($level + 2)) && - git p4 submit && - p4 filelog //depot/file12 && - p4 filelog //depot/file12 | test_must_fail grep -q "branch from" && - - cp file2 file13 && - echo "different text" >>file13 && - git add file13 && - git commit -a -m "Copy file2 to file13 with changes" && - git diff-tree -r -C --find-copies-harder HEAD && - level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && - test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && - src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && - test "$src" = file10 && - git config git-p4.detectCopies $(($level - 2)) && - git p4 submit && - p4 filelog //depot/file13 && - p4 filelog //depot/file13 | grep -q "branch from //depot/file" - ) -' - test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9805-git-p4-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh index 353dcfb..fb3c8ec 100755 --- a/t/t9805-git-p4-skip-submit-edit.sh +++ b/t/t9805-git-p4-skip-submit-edit.sh @@ -78,20 +78,19 @@ test_expect_success 'skipSubmitEditCheck' ' test_expect_success 'no config, edited' ' git p4 clone --dest="$git" //depot && test_when_finished cleanup_git && - ed="$TRASH_DIRECTORY/ed.sh" && - test_when_finished "rm \"$ed\"" && - cat >"$ed" <<-EOF && + test_when_finished "rm ed.sh" && + cat >ed.sh <<-EOF && #!$SHELL_PATH sleep 1 touch "\$1" exit 0 EOF - chmod 755 "$ed" && + chmod 755 ed.sh && ( cd "$git" && echo line >>file1 && git commit -a -m "change 5" && - P4EDITOR="" EDITOR="\"$ed\"" git p4 submit && + P4EDITOR="" EDITOR="\"$TRASH_DIRECTORY/ed.sh\"" git p4 submit && p4 changes //depot/... >wc && test_line_count = 5 wc ) diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh index 2892367..fa40cc8 100755 --- a/t/t9806-git-p4-options.sh +++ b/t/t9806-git-p4-options.sh @@ -39,10 +39,9 @@ test_expect_success 'clone --branch' ' ' test_expect_success 'clone --changesfile' ' - cf="$TRASH_DIRECTORY/cf" && - test_when_finished "rm \"$cf\"" && - printf "1\n3\n" >"$cf" && - git p4 clone --changesfile="$cf" --dest="$git" //depot && + test_when_finished "rm cf" && + printf "1\n3\n" >cf && + git p4 clone --changesfile="$TRASH_DIRECTORY/cf" --dest="$git" //depot && test_when_finished cleanup_git && ( cd "$git" && @@ -55,10 +54,9 @@ test_expect_success 'clone --changesfile' ' ' test_expect_success 'clone --changesfile, @all' ' - cf="$TRASH_DIRECTORY/cf" && - test_when_finished "rm \"$cf\"" && - printf "1\n3\n" >"$cf" && - test_must_fail git p4 clone --changesfile="$cf" --dest="$git" //depot@all + test_when_finished "rm cf" && + printf "1\n3\n" >cf && + test_must_fail git p4 clone --changesfile="$TRASH_DIRECTORY/cf" --dest="$git" //depot@all ' # imports both master and p4/master in refs/heads @@ -128,7 +126,7 @@ test_expect_success 'clone --use-client-spec' ' exec >/dev/null && test_must_fail git p4 clone --dest="$git" --use-client-spec ) && - cli2="$TRASH_DIRECTORY/cli2" && + cli2=$(test-path-utils real_path "$TRASH_DIRECTORY/cli2") && mkdir -p "$cli2" && test_when_finished "rmdir \"$cli2\"" && ( @@ -151,7 +149,6 @@ test_expect_success 'clone --use-client-spec' ' cleanup_git && # same thing again, this time with variable instead of option - mkdir "$git" && ( cd "$git" && git init && diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index f23b4c3..9394fd4 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -182,6 +182,161 @@ test_expect_success 'submit rename' ' ) ' +# +# Converting git commit message to p4 change description, including +# parsing out the optional Jobs: line. +# +test_expect_success 'simple one-line description' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo desc2 >desc2 && + git add desc2 && + cat >msg <<-EOF && + One-line description line for desc2. + EOF + git commit -F - <msg && + git config git-p4.skipSubmitEdit true && + git p4 submit && + change=$(p4 -G changes -m 1 //depot/... | \ + marshal_dump change) && + # marshal_dump always adds a newline + p4 -G describe $change | marshal_dump desc | sed \$d >pmsg && + test_cmp msg pmsg + ) +' + +test_expect_success 'description with odd formatting' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo desc3 >desc3 && + git add desc3 && + ( + printf "subject line\n\n\tExtra tab\nline.\n\n" && + printf "Description:\n\tBogus description marker\n\n" && + # git commit eats trailing newlines; only use one + printf "Files:\n\tBogus descs marker\n" + ) >msg && + git commit -F - <msg && + git config git-p4.skipSubmitEdit true && + git p4 submit && + change=$(p4 -G changes -m 1 //depot/... | \ + marshal_dump change) && + # marshal_dump always adds a newline + p4 -G describe $change | marshal_dump desc | sed \$d >pmsg && + test_cmp msg pmsg + ) +' + +make_job() { + name="$1" && + tab="$(printf \\t)" && + p4 job -o | \ + sed -e "/^Job:/s/.*/Job: $name/" \ + -e "/^Description/{ n; s/.*/$tab job text/; }" | \ + p4 job -i +} + +test_expect_success 'description with Jobs section at end' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo desc4 >desc4 && + git add desc4 && + echo 6060842 >jobname && + ( + printf "subject line\n\n\tExtra tab\nline.\n\n" && + printf "Files:\n\tBogus files marker\n" && + printf "Junk: 3164175\n" && + printf "Jobs: $(cat jobname)\n" + ) >msg && + git commit -F - <msg && + git config git-p4.skipSubmitEdit true && + # build a job + make_job $(cat jobname) && + git p4 submit && + change=$(p4 -G changes -m 1 //depot/... | \ + marshal_dump change) && + # marshal_dump always adds a newline + p4 -G describe $change | marshal_dump desc | sed \$d >pmsg && + # make sure Jobs line and all following is gone + sed "/^Jobs:/,\$d" msg >jmsg && + test_cmp jmsg pmsg && + # make sure p4 knows about job + p4 -G describe $change | marshal_dump job0 >job0 && + test_cmp jobname job0 + ) +' + +test_expect_success 'description with Jobs and values on separate lines' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo desc5 >desc5 && + git add desc5 && + echo PROJ-6060842 >jobname1 && + echo PROJ-6060847 >jobname2 && + ( + printf "subject line\n\n\tExtra tab\nline.\n\n" && + printf "Files:\n\tBogus files marker\n" && + printf "Junk: 3164175\n" && + printf "Jobs:\n" && + printf "\t$(cat jobname1)\n" && + printf "\t$(cat jobname2)\n" + ) >msg && + git commit -F - <msg && + git config git-p4.skipSubmitEdit true && + # build two jobs + make_job $(cat jobname1) && + make_job $(cat jobname2) && + git p4 submit && + change=$(p4 -G changes -m 1 //depot/... | \ + marshal_dump change) && + # marshal_dump always adds a newline + p4 -G describe $change | marshal_dump desc | sed \$d >pmsg && + # make sure Jobs line and all following is gone + sed "/^Jobs:/,\$d" msg >jmsg && + test_cmp jmsg pmsg && + # make sure p4 knows about the two jobs + p4 -G describe $change >change && + ( + marshal_dump job0 <change && + marshal_dump job1 <change + ) | sort >jobs && + cat jobname1 jobname2 | sort >expected && + test_cmp expected jobs + ) +' + +test_expect_success 'description with Jobs section and bogus following text' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo desc6 >desc6 && + git add desc6 && + echo 6060843 >jobname && + ( + printf "subject line\n\n\tExtra tab\nline.\n\n" && + printf "Files:\n\tBogus files marker\n" && + printf "Junk: 3164175\n" && + printf "Jobs: $(cat jobname)\n" && + printf "MoreJunk: 3711\n" + ) >msg && + git commit -F - <msg && + git config git-p4.skipSubmitEdit true && + # build a job + make_job $(cat jobname) && + test_must_fail git p4 submit 2>err && + test_i18ngrep "Unknown field name" err + ) +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9808-git-p4-chdir.sh b/t/t9808-git-p4-chdir.sh index 2f8014a..dc92e60 100755 --- a/t/t9808-git-p4-chdir.sh +++ b/t/t9808-git-p4-chdir.sh @@ -21,7 +21,7 @@ test_expect_success 'init depot' ' # environment variable is set test_expect_success 'P4CONFIG and absolute dir clone' ' printf "P4PORT=$P4PORT\nP4CLIENT=$P4CLIENT\n" >p4config && - test_when_finished "rm \"$TRASH_DIRECTORY/p4config\"" && + test_when_finished "rm p4config" && test_when_finished cleanup_git && ( P4CONFIG=p4config && export P4CONFIG && @@ -33,7 +33,7 @@ test_expect_success 'P4CONFIG and absolute dir clone' ' # same thing, but with relative directory name, note missing $ on --dest test_expect_success 'P4CONFIG and relative dir clone' ' printf "P4PORT=$P4PORT\nP4CLIENT=$P4CLIENT\n" >p4config && - test_when_finished "rm \"$TRASH_DIRECTORY/p4config\"" && + test_when_finished "rm p4config" && test_when_finished cleanup_git && ( P4CONFIG=p4config && export P4CONFIG && diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh index d8d9ca4..e9daa9c 100755 --- a/t/t9810-git-p4-rcs.sh +++ b/t/t9810-git-p4-rcs.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='git-p4 rcs keywords' +test_description='git p4 rcs keywords' . ./lib-git-p4.sh @@ -147,7 +147,7 @@ test_expect_success 'scrub ko files differently' ' ) ' -# hack; git-p4 submit should do it on its own +# hack; git p4 submit should do it on its own test_expect_success 'cleanup after failure' ' ( cd "$cli" && @@ -193,7 +193,7 @@ test_expect_success 'do not scrub plain text' ' ) ' -# hack; git-p4 submit should do it on its own +# hack; git p4 submit should do it on its own test_expect_success 'cleanup after failure 2' ' ( cd "$cli" && @@ -244,9 +244,9 @@ test_expect_success 'cope with rcs keyword expansion damage' ' cd "$git" && git config git-p4.skipSubmitEdit true && git config git-p4.attemptRCSCleanup true && - (cd ../cli && p4_append_to_file kwfile1.c) && + (cd "$cli" && p4_append_to_file kwfile1.c) && old_lines=$(wc -l <kwfile1.c) && - perl -n -i -e "print unless m/Revision:/" kwfile1.c && + "$PERL_PATH" -n -i -e "print unless m/Revision:/" kwfile1.c && new_lines=$(wc -l <kwfile1.c) && test $new_lines = $(($old_lines - 1)) && diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh new file mode 100755 index 0000000..143d413 --- /dev/null +++ b/t/t9812-git-p4-wildcards.sh @@ -0,0 +1,147 @@ +#!/bin/sh + +test_description='git p4 wildcards' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'add p4 files with wildcards in the names' ' + ( + cd "$cli" && + printf "file2\nhas\nsome\nrandom\ntext\n" >file2 && + p4 add file2 && + echo file-wild-hash >file-wild#hash && + echo file-wild-star >file-wild\*star && + echo file-wild-at >file-wild@at && + echo file-wild-percent >file-wild%percent && + p4 add -f file-wild* && + p4 submit -d "file wildcards" + ) +' + +test_expect_success 'wildcard files git p4 clone' ' + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + test -f file-wild#hash && + test -f file-wild\*star && + test -f file-wild@at && + test -f file-wild%percent + ) +' + +test_expect_success 'wildcard files submit back to p4, add' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo git-wild-hash >git-wild#hash && + echo git-wild-star >git-wild\*star && + echo git-wild-at >git-wild@at && + echo git-wild-percent >git-wild%percent && + git add git-wild* && + git commit -m "add some wildcard filenames" && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file git-wild#hash && + test_path_is_file git-wild\*star && + test_path_is_file git-wild@at && + test_path_is_file git-wild%percent + ) +' + +test_expect_success 'wildcard files submit back to p4, modify' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + echo new-line >>git-wild#hash && + echo new-line >>git-wild\*star && + echo new-line >>git-wild@at && + echo new-line >>git-wild%percent && + git add git-wild* && + git commit -m "modify the wildcard files" && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + test_line_count = 2 git-wild#hash && + test_line_count = 2 git-wild\*star && + test_line_count = 2 git-wild@at && + test_line_count = 2 git-wild%percent + ) +' + +test_expect_success 'wildcard files submit back to p4, copy' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + cp file2 git-wild-cp#hash && + git add git-wild-cp#hash && + cp git-wild\*star file-wild-3 && + git add file-wild-3 && + git commit -m "wildcard copies" && + git config git-p4.detectCopies true && + git config git-p4.detectCopiesHarder true && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_file git-wild-cp#hash && + test_path_is_file file-wild-3 + ) +' + +test_expect_success 'wildcard files submit back to p4, rename' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git mv git-wild@at file-wild-4 && + git mv file-wild-3 git-wild-cp%percent && + git commit -m "wildcard renames" && + git config git-p4.detectRenames true && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing git-wild@at && + test_path_is_file git-wild-cp%percent + ) +' + +test_expect_success 'wildcard files submit back to p4, delete' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git rm git-wild* && + git commit -m "delete the wildcard files" && + git config git-p4.skipSubmitEdit true && + git p4 submit + ) && + ( + cd "$cli" && + test_path_is_missing git-wild#hash && + test_path_is_missing git-wild\*star && + test_path_is_missing git-wild@at && + test_path_is_missing git-wild%percent + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh new file mode 100755 index 0000000..f2e85e5 --- /dev/null +++ b/t/t9813-git-p4-preserve-users.sh @@ -0,0 +1,153 @@ +#!/bin/sh + +test_description='git p4 preserve users' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'create files' ' + ( + cd "$cli" && + p4 client -o | sed "/LineEnd/s/:.*/:unix/" | p4 client -i && + echo file1 >file1 && + echo file2 >file2 && + p4 add file1 file2 && + p4 submit -d "add files" + ) +' + +p4_add_user() { + name=$1 fullname=$2 && + p4 user -f -i <<-EOF && + User: $name + Email: $name@localhost + FullName: $fullname + EOF + p4 passwd -P secret $name +} + +p4_grant_admin() { + name=$1 && + { + p4 protect -o && + echo " admin user $name * //depot/..." + } | p4 protect -i +} + +p4_check_commit_author() { + file=$1 user=$2 && + p4 changes -m 1 //depot/$file | grep -q $user +} + +make_change_by_user() { + file=$1 name=$2 email=$3 && + echo "username: a change by $name" >>"$file" && + git add "$file" && + git commit --author "$name <$email>" -m "a change by $name" +} + +# Test username support, submitting as user 'alice' +test_expect_success 'preserve users' ' + p4_add_user alice Alice && + p4_add_user bob Bob && + p4_grant_admin alice && + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + echo "username: a change by alice" >>file1 && + echo "username: a change by bob" >>file2 && + git commit --author "Alice <alice@localhost>" -m "a change by alice" file1 && + git commit --author "Bob <bob@localhost>" -m "a change by bob" file2 && + git config git-p4.skipSubmitEditCheck true && + P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user && + p4_check_commit_author file1 alice && + p4_check_commit_author file2 bob + ) +' + +# Test username support, submitting as bob, who lacks admin rights. Should +# not submit change to p4 (git diff should show deltas). +test_expect_success 'refuse to preserve users without perms' ' + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + echo "username-noperms: a change by alice" >>file1 && + git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 && + P4EDITOR=touch P4USER=bob P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + test_must_fail git p4 commit --preserve-user && + ! git diff --exit-code HEAD..p4/master + ) +' + +# What happens with unknown author? Without allowMissingP4Users it should fail. +test_expect_success 'preserve user where author is unknown to p4' ' + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + echo "username-bob: a change by bob" >>file1 && + git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 && + echo "username-unknown: a change by charlie" >>file1 && + git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 && + P4EDITOR=touch P4USER=alice P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + test_must_fail git p4 commit --preserve-user && + ! git diff --exit-code HEAD..p4/master && + + echo "$0: repeat with allowMissingP4Users enabled" && + git config git-p4.allowMissingP4Users true && + git config git-p4.preserveUser true && + git p4 commit && + git diff --exit-code HEAD..p4/master && + p4_check_commit_author file1 alice + ) +' + +# If we're *not* using --preserve-user, git-p4 should warn if we're submitting +# changes that are not all ours. +# Test: user in p4 and user unknown to p4. +# Test: warning disabled and user is the same. +test_expect_success 'not preserving user with mixed authorship' ' + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEditCheck true && + p4_add_user derek Derek && + + make_change_by_user usernamefile3 Derek derek@localhost && + P4EDITOR=cat P4USER=alice P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + git p4 commit |\ + grep "git author derek@localhost does not match" && + + make_change_by_user usernamefile3 Charlie charlie@localhost && + git p4 commit |\ + grep "git author charlie@localhost does not match" && + + make_change_by_user usernamefile3 alice alice@localhost && + git p4 commit |\ + test_must_fail grep "git author.*does not match" && + + git config git-p4.skipUserNameCheck true && + make_change_by_user usernamefile3 Charlie charlie@localhost && + git p4 commit |\ + test_must_fail grep "git author.*does not match" && + + p4_check_commit_author usernamefile3 alice + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh new file mode 100755 index 0000000..3bf1224 --- /dev/null +++ b/t/t9814-git-p4-rename.sh @@ -0,0 +1,206 @@ +#!/bin/sh + +test_description='git p4 rename' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +# We rely on this behavior to detect for p4 move availability. +test_expect_success 'p4 help unknown returns 1' ' + ( + cd "$cli" && + ( + p4 help client >errs 2>&1 + echo $? >retval + ) + echo 0 >expected && + test_cmp expected retval && + rm retval && + ( + p4 help nosuchcommand >errs 2>&1 + echo $? >retval + ) + echo 1 >expected && + test_cmp expected retval && + rm retval + ) +' + +test_expect_success 'create files' ' + ( + cd "$cli" && + p4 client -o | sed "/LineEnd/s/:.*/:unix/" | p4 client -i && + cat >file1 <<-EOF && + A large block of text + in file1 that will generate + enough context so that rename + and copy detection will find + something interesting to do. + EOF + cat >file2 <<-EOF && + /* + * This blob looks a bit + * different. + */ + int main(int argc, char **argv) + { + char text[200]; + + strcpy(text, "copy/rename this"); + printf("text is %s\n", text); + return 0; + } + EOF + p4 add file1 file2 && + p4 submit -d "add files" + ) +' + +# Rename a file and confirm that rename is not detected in P4. +# Rename the new file again with detectRenames option enabled and confirm that +# this is detected in P4. +# Rename the new file again adding an extra line, configure a big threshold in +# detectRenames and confirm that rename is not detected in P4. +# Repeat, this time with a smaller threshold and confirm that the rename is +# detected in P4. +test_expect_success 'detect renames' ' + git p4 clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + + git mv file1 file4 && + git commit -a -m "Rename file1 to file4" && + git diff-tree -r -M HEAD && + git p4 submit && + p4 filelog //depot/file4 >filelog && + ! grep " from //depot" filelog && + + git mv file4 file5 && + git commit -a -m "Rename file4 to file5" && + git diff-tree -r -M HEAD && + git config git-p4.detectRenames true && + git p4 submit && + p4 filelog //depot/file5 >filelog && + grep " from //depot/file4" filelog && + + git mv file5 file6 && + echo update >>file6 && + git add file6 && + git commit -a -m "Rename file5 to file6 with changes" && + git diff-tree -r -M HEAD && + level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && + test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && + git config git-p4.detectRenames $(($level + 2)) && + git p4 submit && + p4 filelog //depot/file6 >filelog && + ! grep " from //depot" filelog && + + git mv file6 file7 && + echo update >>file7 && + git add file7 && + git commit -a -m "Rename file6 to file7 with changes" && + git diff-tree -r -M HEAD && + level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") && + test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && + git config git-p4.detectRenames $(($level - 2)) && + git p4 submit && + p4 filelog //depot/file7 >filelog && + grep " from //depot/file6" filelog + ) +' + +# Copy a file and confirm that copy is not detected in P4. +# Copy a file with detectCopies option enabled and confirm that copy is not +# detected in P4. +# Modify and copy a file with detectCopies option enabled and confirm that copy +# is detected in P4. +# Copy a file with detectCopies and detectCopiesHarder options enabled and +# confirm that copy is detected in P4. +# Modify and copy a file, configure a bigger threshold in detectCopies and +# confirm that copy is not detected in P4. +# Modify and copy a file, configure a smaller threshold in detectCopies and +# confirm that copy is detected in P4. +test_expect_success 'detect copies' ' + git p4 clone --dest="$git" //depot@all && + test_when_finished cleanup_git && + ( + cd "$git" && + git config git-p4.skipSubmitEdit true && + + cp file2 file8 && + git add file8 && + git commit -a -m "Copy file2 to file8" && + git diff-tree -r -C HEAD && + git p4 submit && + p4 filelog //depot/file8 && + p4 filelog //depot/file8 | test_must_fail grep -q "branch from" && + + cp file2 file9 && + git add file9 && + git commit -a -m "Copy file2 to file9" && + git diff-tree -r -C HEAD && + git config git-p4.detectCopies true && + git p4 submit && + p4 filelog //depot/file9 && + p4 filelog //depot/file9 | test_must_fail grep -q "branch from" && + + echo "file2" >>file2 && + cp file2 file10 && + git add file2 file10 && + git commit -a -m "Modify and copy file2 to file10" && + git diff-tree -r -C HEAD && + git p4 submit && + p4 filelog //depot/file10 && + p4 filelog //depot/file10 | grep -q "branch from //depot/file" && + + cp file2 file11 && + git add file11 && + git commit -a -m "Copy file2 to file11" && + git diff-tree -r -C --find-copies-harder HEAD && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 && + git config git-p4.detectCopiesHarder true && + git p4 submit && + p4 filelog //depot/file11 && + p4 filelog //depot/file11 | grep -q "branch from //depot/file" && + + cp file2 file12 && + echo "some text" >>file12 && + git add file12 && + git commit -a -m "Copy file2 to file12 with changes" && + git diff-tree -r -C --find-copies-harder HEAD && + level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && + test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 -o "$src" = file11 && + git config git-p4.detectCopies $(($level + 2)) && + git p4 submit && + p4 filelog //depot/file12 && + p4 filelog //depot/file12 | test_must_fail grep -q "branch from" && + + cp file2 file13 && + echo "different text" >>file13 && + git add file13 && + git commit -a -m "Copy file2 to file13 with changes" && + git diff-tree -r -C --find-copies-harder HEAD && + level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") && + test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 && + src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) && + test "$src" = file10 -o "$src" = file11 -o "$src" = file12 && + git config git-p4.detectCopies $(($level - 2)) && + git p4 submit && + p4 filelog //depot/file13 && + p4 filelog //depot/file13 | grep -q "branch from //depot/file" + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 256e6a0..92d7eb4 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -3,21 +3,9 @@ # Copyright (c) 2012 Felipe Contreras # -if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then - # we are in full-on bash mode - true -elif type bash >/dev/null 2>&1; then - # execute in full-on bash mode - unset POSIXLY_CORRECT - exec bash "$0" "$@" -else - echo '1..0 #SKIP skipping bash completion tests; bash not available' - exit 0 -fi - test_description='test bash completion' -. ./test-lib.sh +. ./lib-bash.sh complete () { diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh new file mode 100755 index 0000000..f17c1f8 --- /dev/null +++ b/t/t9903-bash-prompt.sh @@ -0,0 +1,456 @@ +#!/bin/sh +# +# Copyright (c) 2012 SZEDER Gábor +# + +test_description='test git-specific bash prompt functions' + +. ./lib-bash.sh + +. "$GIT_BUILD_DIR/contrib/completion/git-prompt.sh" + +actual="$TRASH_DIRECTORY/actual" + +test_expect_success 'setup for prompt tests' ' + mkdir -p subdir/subsubdir && + git init otherrepo && + echo 1 > file && + git add file && + test_tick && + git commit -m initial && + git tag -a -m msg1 t1 && + git checkout -b b1 && + echo 2 > file && + git commit -m "second b1" file && + echo 3 > file && + git commit -m "third b1" file && + git tag -a -m msg2 t2 && + git checkout -b b2 master && + echo 0 > file && + git commit -m "second b2" file && + git checkout master +' + +test_expect_success 'gitdir - from command line (through $__git_dir)' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + __git_dir="$TRASH_DIRECTORY/otherrepo/.git" && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - repo as argument' ' + echo "otherrepo/.git" > expected && + __gitdir "otherrepo" > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - remote as argument' ' + echo "remote" > expected && + __gitdir "remote" > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - .git directory in cwd' ' + echo ".git" > expected && + __gitdir > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - .git directory in parent' ' + echo "$TRASH_DIRECTORY/.git" > expected && + ( + cd subdir/subsubdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - cwd is a .git directory' ' + echo "." > expected && + ( + cd .git && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - parent is a .git directory' ' + echo "$TRASH_DIRECTORY/.git" > expected && + ( + cd .git/refs/heads && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - $GIT_DIR set while .git directory in cwd' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" && + export GIT_DIR && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - $GIT_DIR set while .git directory in parent' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + ( + GIT_DIR="$TRASH_DIRECTORY/otherrepo/.git" && + export GIT_DIR && + cd subdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - non-existing $GIT_DIR' ' + ( + GIT_DIR="$TRASH_DIRECTORY/non-existing" && + export GIT_DIR && + test_must_fail __gitdir + ) +' + +test_expect_success 'gitdir - gitfile in cwd' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" > subdir/.git && + test_when_finished "rm -f subdir/.git" && + ( + cd subdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - gitfile in parent' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + echo "gitdir: $TRASH_DIRECTORY/otherrepo/.git" > subdir/.git && + test_when_finished "rm -f subdir/.git" && + ( + cd subdir/subsubdir && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success SYMLINKS 'gitdir - resulting path avoids symlinks' ' + echo "$TRASH_DIRECTORY/otherrepo/.git" > expected && + mkdir otherrepo/dir && + test_when_finished "rm -rf otherrepo/dir" && + ln -s otherrepo/dir link && + test_when_finished "rm -f link" && + ( + cd link && + __gitdir > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'gitdir - not a git repository' ' + ( + cd subdir/subsubdir && + GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY" && + export GIT_CEILING_DIRECTORIES && + test_must_fail __gitdir + ) +' + +test_expect_success 'prompt - branch name' ' + printf " (master)" > expected && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - detached head' ' + printf " ((%s...))" $(git log -1 --format="%h" b1^) > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - contains' ' + printf " ((t2~1))" > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=contains && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - branch' ' + printf " ((b1~1))" > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=branch && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - describe' ' + printf " ((t1-1-g%s))" $(git log -1 --format="%h" b1^) > expected && + git checkout b1^ && + test_when_finished "git checkout master" && + ( + GIT_PS1_DESCRIBE_STYLE=describe && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - describe detached head - default' ' + printf " ((t2))" > expected && + git checkout --detach b1 && + test_when_finished "git checkout master" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - deep inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + cd .git/refs/heads && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - inside bare repository' ' + printf " (BARE:master)" > expected && + git init --bare bare.git && + test_when_finished "rm -rf bare.git" && + ( + cd bare.git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - interactive rebase' ' + printf " (b1|REBASE-i)" > expected + echo "#!$SHELL_PATH" >fake_editor.sh && + cat >>fake_editor.sh <<\EOF && +echo "edit $(git log -1 --format="%h")" > "$1" +EOF + test_when_finished "rm -f fake_editor.sh" && + chmod a+x fake_editor.sh && + test_set_editor "$TRASH_DIRECTORY/fake_editor.sh" && + git checkout b1 && + test_when_finished "git checkout master" && + git rebase -i HEAD^ && + test_when_finished "git rebase --abort" + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - rebase merge' ' + printf " (b2|REBASE-m)" > expected && + git checkout b2 && + test_when_finished "git checkout master" && + test_must_fail git rebase --merge b1 b2 && + test_when_finished "git rebase --abort" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - rebase' ' + printf " ((t2)|REBASE)" > expected && + git checkout b2 && + test_when_finished "git checkout master" && + test_must_fail git rebase b1 b2 && + test_when_finished "git rebase --abort" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - merge' ' + printf " (b1|MERGING)" > expected && + git checkout b1 && + test_when_finished "git checkout master" && + test_must_fail git merge b2 && + test_when_finished "git reset --hard" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - cherry-pick' ' + printf " (master|CHERRY-PICKING)" > expected && + test_must_fail git cherry-pick b1 && + test_when_finished "git reset --hard" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - bisect' ' + printf " (master|BISECTING)" > expected && + git bisect start && + test_when_finished "git bisect reset" && + __git_ps1 > "$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - clean' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty worktree' ' + printf " (master *)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty index' ' + printf " (master +)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + git add -u && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - dirty index and worktree' ' + printf " (master *+)" > expected && + echo "dirty index" > file && + test_when_finished "git reset --hard" && + git add -u && + echo "dirty worktree" > file && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - before root commit' ' + printf " (master #)" > expected && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + cd otherrepo && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - disabled by config' ' + printf " (master)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + test_config bash.showDirtyState false && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - dirty status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + echo "dirty" > file && + test_when_finished "git reset --hard" && + ( + GIT_PS1_SHOWDIRTYSTATE=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - no stash' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWSTASHSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - stash' ' + printf " (master $)" > expected && + echo 2 >file && + git stash && + test_when_finished "git stash drop" && + ( + GIT_PS1_SHOWSTASHSTATE=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - stash status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + echo 2 >file && + git stash && + test_when_finished "git stash drop" && + ( + GIT_PS1_SHOWSTASHSTATE=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - no untracked files' ' + printf " (master)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd otherrepo && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - untracked files' ' + printf " (master %%)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - untracked files status indicator - not shown inside .git directory' ' + printf " (GIT_DIR!)" > expected && + ( + GIT_PS1_SHOWUNTRACKEDFILES=y && + cd .git && + __git_ps1 > "$actual" + ) && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - format string starting with dash' ' + printf -- "-master" > expected && + __git_ps1 "-%s" > "$actual" && + test_cmp expected "$actual" +' + +test_done diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 7b3b4be..80daaca 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -76,11 +76,11 @@ test_decode_color () { } nul_to_q () { - perl -pe 'y/\000/Q/' + "$PERL_PATH" -pe 'y/\000/Q/' } q_to_nul () { - perl -pe 'y/Q/\000/' + "$PERL_PATH" -pe 'y/Q/\000/' } q_to_cr () { @@ -143,10 +143,19 @@ test_pause () { # Both <file> and <contents> default to <message>. test_commit () { - file=${2:-"$1.t"} + notick= && + if test "z$1" = "z--notick" + then + notick=yes + shift + fi && + file=${2:-"$1.t"} && echo "${3-$1}" > "$file" && git add "$file" && - test_tick && + if test -z "$notick" + then + test_tick + fi && git commit -m "$1" && git tag "$1" } diff --git a/t/test-lib.sh b/t/test-lib.sh index 2ac9536..5e7f435 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -495,6 +495,8 @@ export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS +export PERL_PATH + if test -z "$GIT_TEST_CMP" then if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT" |