diff options
Diffstat (limited to 't')
174 files changed, 10164 insertions, 1431 deletions
@@ -293,6 +293,28 @@ and know what setup is needed for it. Or when you want to run everything up to a certain test. +Running tests with special setups +--------------------------------- + +The whole test suite could be run to test some special features +that cannot be easily covered by a few specific test cases. These +could be enabled by running the test suite with correct GIT_TEST_ +environment set. + +GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole +test suite. Accept any boolean values that are accepted by git-config. + +GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon +pack-objects code path where there are more than 1024 packs even if +the actual number of packs in repository is below this limit. Accept +any boolean values that are accepted by git-config. + +GIT_TEST_OE_SIZE=<n> exercises the uncommon pack-objects code path +where we do not cache object size in memory and read it from existing +packs on demand. This normally only happens when the object size is +over 2GB. This variable forces the code path on any object larger than +<n> bytes. + Naming Tests ------------ diff --git a/t/diff-lib.sh b/t/diff-lib.sh index c211dc4..2de880f 100644 --- a/t/diff-lib.sh +++ b/t/diff-lib.sh @@ -1,6 +1,6 @@ : -sanitize_diff_raw='/^:/s/ '"\($_x40\)"' '"\($_x40\)"' \([A-Z]\)[0-9]* / \1 \2 \3# /' +sanitize_diff_raw='/^:/s/ '"\($OID_REGEX\)"' '"\($OID_REGEX\)"' \([A-Z]\)[0-9]* / \1 \2 \3# /' compare_diff_raw () { # When heuristics are improved, the score numbers would change. # Ignore them while comparing. @@ -12,7 +12,7 @@ compare_diff_raw () { test_cmp .tmp-1 .tmp-2 && rm -f .tmp-1 .tmp-2 } -sanitize_diff_raw_z='/^:/s/ '"$_x40"' '"$_x40"' \([A-Z]\)[0-9]*$/ X X \1#/' +sanitize_diff_raw_z='/^:/s/ '"$OID_REGEX"' '"$OID_REGEX"' \([A-Z]\)[0-9]*$/ X X \1#/' compare_diff_raw_z () { # When heuristics are improved, the score numbers would change. # Ignore them while comparing. diff --git a/t/helper/test-chmtime.c b/t/helper/test-chmtime.c index 1790cea..aa22af4 100644 --- a/t/helper/test-chmtime.c +++ b/t/helper/test-chmtime.c @@ -18,20 +18,30 @@ * * Examples: * - * To just print the mtime use --verbose and set the file mtime offset to 0: + * To print the mtime and the file name use --verbose and set + * the file mtime offset to 0: * * test-tool chmtime -v +0 file * + * To print only the mtime use --get: + * + * test-tool chmtime --get file + * * To set the mtime to current time: * * test-tool chmtime =+0 file * + * To set the file mtime offset to +1 and print the new value: + * + * test-tool chmtime --get +1 file + * */ #include "test-tool.h" #include "git-compat-util.h" #include <utime.h> -static const char usage_str[] = "-v|--verbose (+|=|=+|=-|-)<seconds> <file>..."; +static const char usage_str[] = + "(-v|--verbose|-g|--get) (+|=|=+|=-|-)<seconds> <file>..."; static int timespec_arg(const char *arg, long int *set_time, int *set_eq) { @@ -47,7 +57,6 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) } *set_time = strtol(timespec, &test, 10); if (*test) { - fprintf(stderr, "Not a base-10 integer: %s\n", arg + 1); return 0; } if ((*set_eq && *set_time < 0) || *set_eq == 2) { @@ -60,6 +69,7 @@ static int timespec_arg(const char *arg, long int *set_time, int *set_eq) int cmd__chmtime(int argc, const char **argv) { static int verbose; + static int get; int i = 1; /* no mtime change by default */ @@ -69,18 +79,34 @@ int cmd__chmtime(int argc, const char **argv) if (argc < 3) goto usage; - if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { + if (strcmp(argv[i], "--get") == 0 || strcmp(argv[i], "-g") == 0) { + get = 1; + ++i; + } else if (strcmp(argv[i], "--verbose") == 0 || strcmp(argv[i], "-v") == 0) { verbose = 1; ++i; } - if (timespec_arg(argv[i], &set_time, &set_eq)) + + if (i == argc) { + goto usage; + } + + if (timespec_arg(argv[i], &set_time, &set_eq)) { ++i; - else + } else { + if (get == 0) { + fprintf(stderr, "Not a base-10 integer: %s\n", argv[i] + 1); + goto usage; + } + } + + if (i == argc) goto usage; for (; i < argc; i++) { struct stat sb; struct utimbuf utb; + uintmax_t mtime; if (stat(argv[i], &sb) < 0) { fprintf(stderr, "Failed to stat %s: %s\n", @@ -100,8 +126,10 @@ int cmd__chmtime(int argc, const char **argv) utb.actime = sb.st_atime; utb.modtime = set_eq ? set_time : sb.st_mtime + set_time; - if (verbose) { - uintmax_t mtime = utb.modtime < 0 ? 0: utb.modtime; + mtime = utb.modtime < 0 ? 0: utb.modtime; + if (get) { + printf("%"PRIuMAX"\n", mtime); + } else if (verbose) { printf("%"PRIuMAX"\t%s\n", mtime, argv[i]); } diff --git a/t/helper/test-drop-caches.c b/t/helper/test-drop-caches.c index 8387608..d6bcfdd 100644 --- a/t/helper/test-drop-caches.c +++ b/t/helper/test-drop-caches.c @@ -2,6 +2,7 @@ #include "git-compat-util.h" #if defined(GIT_WINDOWS_NATIVE) +#include "lazyload.h" static int cmd_sync(void) { @@ -82,8 +83,7 @@ static int cmd_dropcaches(void) { HANDLE hProcess = GetCurrentProcess(); HANDLE hToken; - HMODULE ntdll; - DWORD(WINAPI *NtSetSystemInformation)(INT, PVOID, ULONG); + DECLARE_PROC_ADDR(ntdll.dll, DWORD, NtSetSystemInformation, INT, PVOID, ULONG); SYSTEM_MEMORY_LIST_COMMAND command; int status; @@ -95,14 +95,8 @@ static int cmd_dropcaches(void) CloseHandle(hToken); - ntdll = LoadLibrary("ntdll.dll"); - if (!ntdll) - return error("Can't load ntdll.dll, wrong Windows version?"); - - NtSetSystemInformation = - (DWORD(WINAPI *)(INT, PVOID, ULONG))GetProcAddress(ntdll, "NtSetSystemInformation"); - if (!NtSetSystemInformation) - return error("Can't get function addresses, wrong Windows version?"); + if (!INIT_PROC_ADDR(NtSetSystemInformation)) + return error("Could not find NtSetSystemInformation() function"); command = MemoryPurgeStandbyList; status = NtSetSystemInformation( @@ -115,8 +109,6 @@ static int cmd_dropcaches(void) else if (status != STATUS_SUCCESS) error("Unable to execute the memory list command %d", status); - FreeLibrary(ntdll); - return status; } diff --git a/t/helper/test-dump-split-index.c b/t/helper/test-dump-split-index.c index 4e2fdb5..63c689d 100644 --- a/t/helper/test-dump-split-index.c +++ b/t/helper/test-dump-split-index.c @@ -14,13 +14,13 @@ int cmd__dump_split_index(int ac, const char **av) int i; do_read_index(&the_index, av[1], 1); - printf("own %s\n", sha1_to_hex(the_index.sha1)); + printf("own %s\n", oid_to_hex(&the_index.oid)); si = the_index.split_index; if (!si) { printf("not a split index\n"); return 0; } - printf("base %s\n", sha1_to_hex(si->base_sha1)); + printf("base %s\n", oid_to_hex(&si->base_oid)); for (i = 0; i < the_index.cache_nr; i++) { struct cache_entry *ce = the_index.cache[i]; printf("%06o %s %d\t%s\n", ce->ce_mode, diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index d7c55c2..bd92fb3 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -23,7 +23,7 @@ static void dump(struct untracked_cache_dir *ucd, struct strbuf *base) len = base->len; strbuf_addf(base, "%s/", ucd->name); printf("%s %s", base->buf, - sha1_to_hex(ucd->exclude_sha1)); + oid_to_hex(&ucd->exclude_oid)); if (ucd->recurse) fputs(" recurse", stdout); if (ucd->check_only) diff --git a/t/helper/test-example-decorate.c b/t/helper/test-example-decorate.c index 081115b..a20a616 100644 --- a/t/helper/test-example-decorate.c +++ b/t/helper/test-example-decorate.c @@ -30,10 +30,10 @@ int cmd__example_decorate(int argc, const char **argv) two = lookup_unknown_object(two_oid.hash); ret = add_decoration(&n, one, &decoration_a); if (ret) - die("BUG: when adding a brand-new object, NULL should be returned"); + BUG("when adding a brand-new object, NULL should be returned"); ret = add_decoration(&n, two, NULL); if (ret) - die("BUG: when adding a brand-new object, NULL should be returned"); + BUG("when adding a brand-new object, NULL should be returned"); /* * When re-adding an already existing object, the old decoration is @@ -41,10 +41,10 @@ int cmd__example_decorate(int argc, const char **argv) */ ret = add_decoration(&n, one, NULL); if (ret != &decoration_a) - die("BUG: when readding an already existing object, existing decoration should be returned"); + BUG("when readding an already existing object, existing decoration should be returned"); ret = add_decoration(&n, two, &decoration_b); if (ret) - die("BUG: when readding an already existing object, existing decoration should be returned"); + BUG("when readding an already existing object, existing decoration should be returned"); /* * Lookup returns the added declarations, or NULL if the object was @@ -52,14 +52,14 @@ int cmd__example_decorate(int argc, const char **argv) */ ret = lookup_decoration(&n, one); if (ret) - die("BUG: lookup should return added declaration"); + BUG("lookup should return added declaration"); ret = lookup_decoration(&n, two); if (ret != &decoration_b) - die("BUG: lookup should return added declaration"); + BUG("lookup should return added declaration"); three = lookup_unknown_object(three_oid.hash); ret = lookup_decoration(&n, three); if (ret) - die("BUG: lookup for unknown object should return NULL"); + BUG("lookup for unknown object should return NULL"); /* * The user can also loop through all entries. @@ -69,7 +69,7 @@ int cmd__example_decorate(int argc, const char **argv) objects_noticed++; } if (objects_noticed != 2) - die("BUG: should have 2 objects"); + BUG("should have 2 objects"); return 0; } diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index e115d44..ae091d9 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -1,6 +1,7 @@ #include "test-tool.h" #include "cache.h" #include "string-list.h" +#include "utf8.h" /* * A "string_list_each_func_t" function that normalizes an entry from @@ -171,6 +172,11 @@ static struct test_data dirname_data[] = { { NULL, NULL } }; +static int is_dotgitmodules(const char *path) +{ + return is_hfs_dotgitmodules(path) || is_ntfs_dotgitmodules(path); +} + int cmd__path_utils(int argc, const char **argv) { if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) { @@ -271,6 +277,20 @@ int cmd__path_utils(int argc, const char **argv) if (argc == 2 && !strcmp(argv[1], "dirname")) return test_function(dirname_data, posix_dirname, argv[1]); + if (argc > 2 && !strcmp(argv[1], "is_dotgitmodules")) { + int res = 0, expect = 1, i; + for (i = 2; i < argc; i++) + if (!strcmp("--not", argv[i])) + expect = !expect; + else if (expect != is_dotgitmodules(argv[i])) + res = error("'%s' is %s.gitmodules", argv[i], + expect ? "not " : ""); + else + fprintf(stderr, "ok: '%s' is %s.gitmodules\n", + argv[i], expect ? "" : "not "); + return !!res; + } + fprintf(stderr, "%s: unknown function name: %s\n", argv[0], argv[1] ? argv[1] : "(there was none)"); return 1; diff --git a/t/helper/test-pkt-line.c b/t/helper/test-pkt-line.c new file mode 100644 index 0000000..0f19e53 --- /dev/null +++ b/t/helper/test-pkt-line.c @@ -0,0 +1,64 @@ +#include "pkt-line.h" + +static void pack_line(const char *line) +{ + if (!strcmp(line, "0000") || !strcmp(line, "0000\n")) + packet_flush(1); + else if (!strcmp(line, "0001") || !strcmp(line, "0001\n")) + packet_delim(1); + else + packet_write_fmt(1, "%s", line); +} + +static void pack(int argc, const char **argv) +{ + if (argc) { /* read from argv */ + int i; + for (i = 0; i < argc; i++) + pack_line(argv[i]); + } else { /* read from stdin */ + char line[LARGE_PACKET_MAX]; + while (fgets(line, sizeof(line), stdin)) { + pack_line(line); + } + } +} + +static void unpack(void) +{ + struct packet_reader reader; + packet_reader_init(&reader, 0, NULL, 0, + PACKET_READ_GENTLE_ON_EOF | + PACKET_READ_CHOMP_NEWLINE); + + while (packet_reader_read(&reader) != PACKET_READ_EOF) { + switch (reader.status) { + case PACKET_READ_EOF: + break; + case PACKET_READ_NORMAL: + printf("%s\n", reader.line); + break; + case PACKET_READ_FLUSH: + printf("0000\n"); + break; + case PACKET_READ_DELIM: + printf("0001\n"); + break; + } + } +} + +int cmd_main(int argc, const char **argv) +{ + if (argc < 2) + die("too few arguments"); + + if (!strcmp(argv[1], "pack")) + pack(argc - 2, argv + 2); + else if (!strcmp(argv[1], "unpack")) + unpack(); + else + die("invalid argument '%s'", argv[1]); + + return 0; +} diff --git a/t/helper/test-scrap-cache-tree.c b/t/helper/test-scrap-cache-tree.c index d26d3e7..393f160 100644 --- a/t/helper/test-scrap-cache-tree.c +++ b/t/helper/test-scrap-cache-tree.c @@ -4,10 +4,10 @@ #include "tree.h" #include "cache-tree.h" -static struct lock_file index_lock; - int cmd__scrap_cache_tree(int ac, const char **av) { + struct lock_file index_lock = LOCK_INIT; + setup_git_directory(); hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); if (read_cache() < 0) diff --git a/t/helper/test-submodule-config.c b/t/helper/test-submodule-config.c index 5c6e4b0..e269274 100644 --- a/t/helper/test-submodule-config.c +++ b/t/helper/test-submodule-config.c @@ -49,9 +49,11 @@ int cmd__submodule_config(int argc, const char **argv) die_usage(argc, argv, "Commit not found."); if (lookup_name) { - submodule = submodule_from_name(&commit_oid, path_or_name); + submodule = submodule_from_name(the_repository, + &commit_oid, path_or_name); } else - submodule = submodule_from_path(&commit_oid, path_or_name); + submodule = submodule_from_path(the_repository, + &commit_oid, path_or_name); if (!submodule) die_usage(argc, argv, "Submodule not found."); @@ -65,7 +67,7 @@ int cmd__submodule_config(int argc, const char **argv) arg += 2; } - submodule_free(); + submodule_free(the_repository); return 0; } diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index 87066ce..805a45d 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -48,6 +48,7 @@ int cmd_main(int argc, const char **argv) { int i; + BUG_exit_code = 99; if (argc < 2) die("I need a test name!"); diff --git a/t/helper/test-write-cache.c b/t/helper/test-write-cache.c index 017dc30..8837717 100644 --- a/t/helper/test-write-cache.c +++ b/t/helper/test-write-cache.c @@ -2,22 +2,18 @@ #include "cache.h" #include "lockfile.h" -static struct lock_file index_lock; - int cmd__write_cache(int argc, const char **argv) { - int i, cnt = 1, lockfd; + struct lock_file index_lock = LOCK_INIT; + int i, cnt = 1; if (argc == 2) cnt = strtol(argv[1], NULL, 0); setup_git_directory(); read_cache(); for (i = 0; i < cnt; i++) { - lockfd = hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); - if (0 <= lockfd) { - write_locked_index(&the_index, &index_lock, COMMIT_LOCK); - } else { - rollback_lock_file(&index_lock); - } + hold_locked_index(&index_lock, LOCK_DIE_ON_ERROR); + if (write_locked_index(&the_index, &index_lock, COMMIT_LOCK)) + die("unable to write index file"); } return 0; diff --git a/t/lib-diff-alternative.sh b/t/lib-diff-alternative.sh index 8b4dbf2..8d1e408 100644 --- a/t/lib-diff-alternative.sh +++ b/t/lib-diff-alternative.sh @@ -59,9 +59,11 @@ int main(int argc, char **argv) } EOF - cat >expect <<\EOF + file1=$(git rev-parse --short $(git hash-object file1)) + file2=$(git rev-parse --short $(git hash-object file2)) + cat >expect <<EOF diff --git a/file1 b/file2 -index 6faa5a3..e3af329 100644 +index $file1..$file2 100644 --- a/file1 +++ b/file2 @@ -1,26 +1,25 @@ @@ -136,9 +138,11 @@ e f EOF - cat >expect <<\EOF + uniq1=$(git rev-parse --short $(git hash-object uniq1)) + uniq2=$(git rev-parse --short $(git hash-object uniq2)) + cat >expect <<EOF diff --git a/uniq1 b/uniq2 -index b414108..0fdf397 100644 +index $uniq1..$uniq2 100644 --- a/uniq1 +++ b/uniq2 @@ -1,6 +1,6 @@ diff --git a/t/lib-pack.sh b/t/lib-pack.sh index 5010782..c4d907a 100644 --- a/t/lib-pack.sh +++ b/t/lib-pack.sh @@ -79,6 +79,18 @@ pack_obj () { ;; esac + # If it's not a delta, we can convince pack-objects to generate a pack + # with just our entry, and then strip off the header (12 bytes) and + # trailer (20 bytes). + if test -z "$2" + then + echo "$1" | git pack-objects --stdout >pack_obj.tmp && + size=$(wc -c <pack_obj.tmp) && + dd if=pack_obj.tmp bs=1 count=$((size - 20 - 12)) skip=12 && + rm -f pack_obj.tmp + return + fi + echo >&2 "BUG: don't know how to print $1${2:+ (from $2)}" return 1 } diff --git a/t/lib-t6000.sh b/t/lib-t6000.sh index 3f2d873..b0ed476 100644 --- a/t/lib-t6000.sh +++ b/t/lib-t6000.sh @@ -4,11 +4,11 @@ mkdir -p .git/refs/tags >sed.script -# Answer the sha1 has associated with the tag. The tag must exist in .git/refs/tags +# Answer the sha1 has associated with the tag. The tag must exist under refs/tags tag () { _tag=$1 - test -f ".git/refs/tags/$_tag" || error "tag: \"$_tag\" does not exist" - cat ".git/refs/tags/$_tag" + git rev-parse --verify "refs/tags/$_tag" || + error "tag: \"$_tag\" does not exist" } # Generate a commit using the text specified to make it unique and the tree diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 48637ef..bc86516 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -4,6 +4,7 @@ use lib '../../perl/build/lib'; use strict; use warnings; use JSON; +use Getopt::Long; use Git; sub get_times { @@ -36,46 +37,34 @@ sub format_times { return $out; } +sub usage { + print <<EOT; +./aggregate.perl [options] [--] [<dir_or_rev>...] [--] [<test_script>...] > + + Options: + --codespeed * Format output for Codespeed + --reponame <str> * Send given reponame to codespeed + --sort-by <str> * Sort output (only "regression" criteria is supported) + --subsection <str> * Use results from given subsection + +EOT + exit(1); +} + my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, $codespeed, $sortby, $subsection, $reponame); + +Getopt::Long::Configure qw/ require_order /; + +my $rc = GetOptions("codespeed" => \$codespeed, + "reponame=s" => \$reponame, + "sort-by=s" => \$sortby, + "subsection=s" => \$subsection); +usage() unless $rc; + while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; - if ($arg eq "--codespeed") { - $codespeed = 1; - shift @ARGV; - next; - } - if ($arg =~ /--sort-by(?:=(.*))?/) { - shift @ARGV; - if (defined $1) { - $sortby = $1; - } else { - $sortby = shift @ARGV; - if (! defined $sortby) { - die "'--sort-by' requires an argument"; - } - } - next; - } - if ($arg eq "--subsection") { - shift @ARGV; - $subsection = $ARGV[0]; - shift @ARGV; - if (! $subsection) { - die "empty subsection"; - } - next; - } - if ($arg eq "--reponame") { - shift @ARGV; - $reponame = $ARGV[0]; - shift @ARGV; - if (! $reponame) { - die "empty reponame"; - } - next; - } last if -f $arg or $arg eq "--"; if (! -d $arg) { my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); @@ -225,7 +214,8 @@ sub print_sorted_results { my ($sortby) = @_; if ($sortby ne "regression") { - die "only 'regression' is supported as '--sort-by' argument"; + print "Only 'regression' is supported as '--sort-by' argument\n"; + usage(); } my @evolutions; diff --git a/t/perf/bisect_regression b/t/perf/bisect_regression new file mode 100755 index 0000000..a94d995 --- /dev/null +++ b/t/perf/bisect_regression @@ -0,0 +1,73 @@ +#!/bin/sh + +# Read a line coming from `./aggregate.perl --sort-by regression ...` +# and automatically bisect to find the commit responsible for the +# performance regression. +# +# Lines from `./aggregate.perl --sort-by regression ...` look like: +# +# +100.0% p7821-grep-engines-fixed.1 0.04(0.10+0.03) 0.08(0.11+0.08) v2.14.3 v2.15.1 +# +33.3% p7820-grep-engines.1 0.03(0.08+0.02) 0.04(0.08+0.02) v2.14.3 v2.15.1 +# + +die () { + echo >&2 "error: $*" + exit 1 +} + +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --help) + echo "usage: $0 [--config file] [--subsection subsection]" + exit 0 + ;; + --config) + shift + GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") + export GIT_PERF_CONFIG_FILE + shift ;; + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + die "unknown argument '$arg'" + ;; + esac +done + +read -r regression subtest oldtime newtime oldrev newrev + +test_script=$(echo "$subtest" | sed -e 's/\(.*\)\.[0-9]*$/\1.sh/') +test_number=$(echo "$subtest" | sed -e 's/.*\.\([0-9]*\)$/\1/') + +# oldtime and newtime are decimal number, not integers + +oldtime=$(echo "$oldtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') +newtime=$(echo "$newtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') + +test $(echo "$newtime" "$oldtime" | awk '{ print ($1 > $2) }') = 1 || + die "New time '$newtime' shoud be greater than old time '$oldtime'" + +tmpdir=$(mktemp -d -t bisect_regression_XXXXXX) || die "Failed to create temp directory" +echo "$oldtime" >"$tmpdir/oldtime" || die "Failed to write to '$tmpdir/oldtime'" +echo "$newtime" >"$tmpdir/newtime" || die "Failed to write to '$tmpdir/newtime'" + +# Bisecting must be performed from the top level directory (even with --no-checkout) +( + toplevel_dir=$(git rev-parse --show-toplevel) || die "Failed to find top level directory" + cd "$toplevel_dir" || die "Failed to cd into top level directory '$toplevel_dir'" + + git bisect start --no-checkout "$newrev" "$oldrev" || die "Failed to start bisecting" + + git bisect run t/perf/bisect_run_script "$test_script" "$test_number" "$tmpdir" + res="$?" + + git bisect reset + + exit "$res" +) diff --git a/t/perf/bisect_run_script b/t/perf/bisect_run_script new file mode 100755 index 0000000..3ebaf15 --- /dev/null +++ b/t/perf/bisect_run_script @@ -0,0 +1,53 @@ +#!/bin/sh + +script="$1" +test_number="$2" +info_dir="$3" + +# This aborts the bisection immediately +die () { + echo >&2 "error: $*" + exit 255 +} + +bisect_head=$(git rev-parse --verify BISECT_HEAD) || die "Failed to find BISECT_HEAD ref" + +script_number=$(echo "$script" | sed -e "s/^p\([0-9]*\).*\$/\1/") || die "Failed to get script number for '$script'" + +oldtime=$(cat "$info_dir/oldtime") || die "Failed to access '$info_dir/oldtime'" +newtime=$(cat "$info_dir/newtime") || die "Failed to access '$info_dir/newtime'" + +cd t/perf || die "Failed to cd into 't/perf'" + +result_file="$info_dir/perf_${script_number}_${bisect_head}_results.txt" + +GIT_PERF_DIRS_OR_REVS="$bisect_head" +export GIT_PERF_DIRS_OR_REVS + +# Don't use codespeed +GIT_PERF_CODESPEED_OUTPUT= +GIT_PERF_SEND_TO_CODESPEED= +export GIT_PERF_CODESPEED_OUTPUT +export GIT_PERF_SEND_TO_CODESPEED + +./run "$script" >"$result_file" 2>&1 || die "Failed to run perf test '$script'" + +rtime=$(sed -n "s/^$script_number\.$test_number:.*\([0-9]\+\.[0-9]\+\)(.*).*\$/\1/p" "$result_file") + +echo "newtime: $newtime" +echo "rtime: $rtime" +echo "oldtime: $oldtime" + +# Compare ($newtime - $rtime) with ($rtime - $oldtime) +# Times are decimal number, not integers + +if test $(echo "$newtime" "$rtime" "$oldtime" | awk '{ print ($1 - $2 > $2 - $3) }') = 1 +then + # Current commit is considered "good/old" + echo "$rtime" >"$info_dir/oldtime" + exit 0 +else + # Current commit is considered "bad/new" + echo "$rtime" >"$info_dir/newtime" + exit 1 +fi @@ -1,21 +1,34 @@ #!/bin/sh -case "$1" in +die () { + echo >&2 "error: $*" + exit 1 +} + +while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --) + break ;; --help) - echo "usage: $0 [--config file] [other_git_tree...] [--] [test_scripts]" - exit 0 - ;; + echo "usage: $0 [--config file] [--subsection subsec] [other_git_tree...] [--] [test_scripts]" + exit 0 ;; --config) shift GIT_PERF_CONFIG_FILE=$(cd "$(dirname "$1")"; pwd)/$(basename "$1") export GIT_PERF_CONFIG_FILE shift ;; -esac - -die () { - echo >&2 "error: $*" - exit 1 -} + --subsection) + shift + GIT_PERF_SUBSECTION="$1" + export GIT_PERF_SUBSECTION + shift ;; + --*) + die "unrecognised option: '$arg'" ;; + *) + break ;; + esac +done run_one_dir () { if test $# -eq 0; then @@ -172,9 +185,32 @@ get_subsections "perf" >test-results/run_subsections.names if test $(wc -l <test-results/run_subsections.names) -eq 0 then + if test -n "$GIT_PERF_SUBSECTION" + then + if test -n "$GIT_PERF_CONFIG_FILE" + then + die "no subsections are defined in config file '$GIT_PERF_CONFIG_FILE'" + else + die "subsection '$GIT_PERF_SUBSECTION' defined without a config file" + fi + fi ( run_subsection "$@" ) +elif test -n "$GIT_PERF_SUBSECTION" +then + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names >/dev/null || + die "subsection '$GIT_PERF_SUBSECTION' not found in '$GIT_PERF_CONFIG_FILE'" + + egrep "^$GIT_PERF_SUBSECTION\$" test-results/run_subsections.names | while read -r subsec + do + ( + GIT_PERF_SUBSECTION="$subsec" + export GIT_PERF_SUBSECTION + echo "======== Run for subsection '$GIT_PERF_SUBSECTION' ========" + run_subsection "$@" + ) + done else while read -r subsec do diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index 7fd87dd..af61d08 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -839,7 +839,7 @@ test_expect_success 'writing tree out with git write-tree' ' ' # we know the shape and contents of the tree and know the object ID for it. -test_expect_success 'validate object ID of a known tree' ' +test_expect_success SHA1 'validate object ID of a known tree' ' test "$tree" = 7bb943559a305bdd6bdee2cef6e5df2413c3d30a ' @@ -882,7 +882,7 @@ test_expect_success 'showing stage with git ls-files --stage' ' git ls-files --stage >current ' -test_expect_success 'validate git ls-files output for a known tree' ' +test_expect_success SHA1 'validate git ls-files output for a known tree' ' cat >expected <<-\EOF && 100644 f87290f8eb2cbbea7857214459a0739927eab154 0 path0 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0 path0sym @@ -900,7 +900,7 @@ test_expect_success 'writing tree out with git write-tree' ' tree=$(git write-tree) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$tree" = 087704a96baf1c2d1c869a8b084481e121c88b5b ' @@ -908,7 +908,7 @@ test_expect_success 'showing tree with git ls-tree' ' git ls-tree $tree >current ' -test_expect_success 'git ls-tree output for a known tree' ' +test_expect_success SHA1 'git ls-tree output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -924,7 +924,7 @@ test_expect_success 'showing tree with git ls-tree -r' ' git ls-tree -r $tree >current ' -test_expect_success 'git ls-tree -r output for a known tree' ' +test_expect_success SHA1 'git ls-tree -r output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -943,7 +943,7 @@ test_expect_success 'showing tree with git ls-tree -r -t' ' git ls-tree -r -t $tree >current ' -test_expect_success 'git ls-tree -r output for a known tree' ' +test_expect_success SHA1 'git ls-tree -r output for a known tree' ' cat >expected <<-\EOF && 100644 blob f87290f8eb2cbbea7857214459a0739927eab154 path0 120000 blob 15a98433ae33114b085f3eb3bb03b832b3180a01 path0sym @@ -964,7 +964,7 @@ test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$ptree" = 21ae8269cacbe57ae09138dcc3a2887f904d02b3 ' @@ -972,7 +972,7 @@ test_expect_success 'writing partial tree out with git write-tree --prefix' ' ptree=$(git write-tree --prefix=path3/subp3) ' -test_expect_success 'validate object ID for a known tree' ' +test_expect_success SHA1 'validate object ID for a known tree' ' test "$ptree" = 3c5e5399f3a333eddecce7a9b9465b63f65f51e2 ' @@ -1006,7 +1006,7 @@ test_expect_success 'git read-tree followed by write-tree should be idempotent' test "$newtree" = "$tree" ' -test_expect_success 'validate git diff-files output for a know cache/work tree state' ' +test_expect_success SHA1 'validate git diff-files output for a know cache/work tree state' ' cat >expected <<\EOF && :100644 100644 f87290f8eb2cbbea7857214459a0739927eab154 0000000000000000000000000000000000000000 M path0 :120000 120000 15a98433ae33114b085f3eb3bb03b832b3180a01 0000000000000000000000000000000000000000 M path0sym @@ -1033,21 +1033,21 @@ test_expect_success 'no diff after checkout and git update-index --refresh' ' ################################################################ P=087704a96baf1c2d1c869a8b084481e121c88b5b -test_expect_success 'git commit-tree records the correct tree in a commit' ' +test_expect_success SHA1 'git commit-tree records the correct tree in a commit' ' commit0=$(echo NO | git commit-tree $P) && tree=$(git show --pretty=raw $commit0 | sed -n -e "s/^tree //p" -e "/^author /q") && test "z$tree" = "z$P" ' -test_expect_success 'git commit-tree records the correct parent in a commit' ' +test_expect_success SHA1 'git commit-tree records the correct parent in a commit' ' commit1=$(echo NO | git commit-tree $P -p $commit0) && parent=$(git show --pretty=raw $commit1 | sed -n -e "s/^parent //p" -e "/^author /q") && test "z$commit0" = "z$parent" ' -test_expect_success 'git commit-tree omits duplicated parent in a commit' ' +test_expect_success SHA1 'git commit-tree omits duplicated parent in a commit' ' commit2=$(echo NO | git commit-tree $P -p $commit0 -p $commit0) && parent=$(git show --pretty=raw $commit2 | sed -n -e "s/^parent //p" -e "/^author /q" | diff --git a/t/t0001-init.sh b/t/t0001-init.sh index c413bff..4c86505 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -287,6 +287,7 @@ test_expect_success 'init notices EEXIST (2)' ' ' test_expect_success POSIXPERM,SANITY 'init notices EPERM' ' + test_when_finished "chmod +w newdir" && rm -fr newdir && mkdir newdir && chmod -w newdir && diff --git a/t/t0012-help.sh b/t/t0012-help.sh index 487b92a..bc27df7 100755 --- a/t/t0012-help.sh +++ b/t/t0012-help.sh @@ -25,6 +25,15 @@ test_expect_success "setup" ' EOF ' +# make sure to exercise these code paths, the output is a bit tricky +# to verify +test_expect_success 'basic help commands' ' + git help >/dev/null && + git help -a >/dev/null && + git help -g >/dev/null && + git help -av >/dev/null +' + test_expect_success "works for commands and guides by default" ' configure_help && git help status && @@ -49,8 +58,23 @@ test_expect_success "--help does not work for guides" " test_i18ncmp expect actual " +test_expect_success 'git help' ' + git help >help.output && + test_i18ngrep "^ clone " help.output && + test_i18ngrep "^ add " help.output && + test_i18ngrep "^ log " help.output && + test_i18ngrep "^ commit " help.output && + test_i18ngrep "^ fetch " help.output +' +test_expect_success 'git help -g' ' + git help -g >help.output && + test_i18ngrep "^ attributes " help.output && + test_i18ngrep "^ everyday " help.output && + test_i18ngrep "^ tutorial " help.output +' + test_expect_success 'generate builtin list' ' - git --list-builtins >builtins + git --list-cmds=builtins >builtins ' while read builtin diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index 71350e0..5f05698 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -98,6 +98,16 @@ test_expect_success 'safecrlf: git diff demotes safecrlf=true to warn' ' ' +test_expect_success 'safecrlf: no warning with safecrlf=false' ' + git config core.autocrlf input && + git config core.safecrlf false && + + for w in I am all CRLF; do echo $w; done | append_cr >allcrlf && + git add allcrlf 2>err && + test_must_be_empty err +' + + test_expect_success 'switch off autocrlf, safecrlf, reset HEAD' ' git config core.autocrlf false && git config core.safecrlf false && diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh new file mode 100755 index 0000000..12b8eb9 --- /dev/null +++ b/t/t0028-working-tree-encoding.sh @@ -0,0 +1,245 @@ +#!/bin/sh + +test_description='working-tree-encoding conversion via gitattributes' + +. ./test-lib.sh + +GIT_TRACE_WORKING_TREE_ENCODING=1 && export GIT_TRACE_WORKING_TREE_ENCODING + +test_expect_success 'setup test files' ' + git config core.eol lf && + + text="hallo there!\ncan you read me?" && + echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && + printf "$text" >test.utf8.raw && + printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && + printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + + # Line ending tests + printf "one\ntwo\nthree\n" >lf.utf8.raw && + printf "one\r\ntwo\r\nthree\r\n" >crlf.utf8.raw && + + # BOM tests + printf "\0a\0b\0c" >nobom.utf16be.raw && + printf "a\0b\0c\0" >nobom.utf16le.raw && + printf "\376\777\0a\0b\0c" >bebom.utf16be.raw && + printf "\777\376a\0b\0c\0" >lebom.utf16le.raw && + printf "\0\0\0a\0\0\0b\0\0\0c" >nobom.utf32be.raw && + printf "a\0\0\0b\0\0\0c\0\0\0" >nobom.utf32le.raw && + printf "\0\0\376\777\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && + printf "\777\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && + + # Add only UTF-16 file, we will add the UTF-32 file later + cp test.utf16.raw test.utf16 && + cp test.utf32.raw test.utf32 && + git add .gitattributes test.utf16 && + git commit -m initial +' + +test_expect_success 'ensure UTF-8 is stored in Git' ' + test_when_finished "rm -f test.utf16.git" && + + git cat-file -p :test.utf16 >test.utf16.git && + test_cmp_bin test.utf8.raw test.utf16.git +' + +test_expect_success 're-encode to UTF-16 on checkout' ' + test_when_finished "rm -f test.utf16.raw" && + + rm test.utf16 && + git checkout test.utf16 && + test_cmp_bin test.utf16.raw test.utf16 +' + +test_expect_success 'check $GIT_DIR/info/attributes support' ' + test_when_finished "rm -f test.utf32.git" && + test_when_finished "git reset --hard HEAD" && + + echo "*.utf32 text working-tree-encoding=utf-32" >.git/info/attributes && + git add test.utf32 && + + git cat-file -p :test.utf32 >test.utf32.git && + test_cmp_bin test.utf8.raw test.utf32.git +' + +for i in 16 32 +do + test_expect_success "check prohibited UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i}be text working-tree-encoding=utf-${i}be" >>.gitattributes && + echo "*.utf${i}le text working-tree-encoding=utf-${i}LE" >>.gitattributes && + + # Here we add a UTF-16 (resp. UTF-32) files with BOM (big/little-endian) + # but we tell Git to treat it as UTF-16BE/UTF-16LE (resp. UTF-32). + # In these cases the BOM is prohibited. + cp bebom.utf${i}be.raw bebom.utf${i}be && + test_must_fail git add bebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}be && + test_must_fail git add lebom.utf${i}be 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}be" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp bebom.utf${i}be.raw bebom.utf${i}le && + test_must_fail git add bebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out && + + cp lebom.utf${i}le.raw lebom.utf${i}le && + test_must_fail git add lebom.utf${i}le 2>err.out && + test_i18ngrep "fatal: BOM is prohibited .* utf-${i}LE" err.out && + test_i18ngrep "use UTF-${i} as working-tree-encoding" err.out + ' + + test_expect_success "check required UTF-${i} BOM" ' + test_when_finished "git reset --hard HEAD" && + + echo "*.utf${i} text working-tree-encoding=utf-${i}" >>.gitattributes && + + cp nobom.utf${i}be.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out && + + cp nobom.utf${i}le.raw nobom.utf${i} && + test_must_fail git add nobom.utf${i} 2>err.out && + test_i18ngrep "fatal: BOM is required .* utf-${i}" err.out && + test_i18ngrep "use UTF-${i}BE or UTF-${i}LE" err.out + ' + + test_expect_success "eol conversion for UTF-${i} encoded files on checkout" ' + test_when_finished "rm -f crlf.utf${i}.raw lf.utf${i}.raw" && + test_when_finished "git reset --hard HEAD^" && + + cat lf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >lf.utf${i}.raw && + cat crlf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >crlf.utf${i}.raw && + cp crlf.utf${i}.raw eol.utf${i} && + + cat >expectIndexLF <<-EOF && + i/lf w/-text attr/text eol.utf${i} + EOF + + git add eol.utf${i} && + git commit -m eol && + + # UTF-${i} with CRLF (Windows line endings) + rm eol.utf${i} && + git -c core.eol=crlf checkout eol.utf${i} && + test_cmp_bin crlf.utf${i}.raw eol.utf${i} && + + # Although the file has CRLF in the working tree, + # ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual && + + # UTF-${i} with LF (Unix line endings) + rm eol.utf${i} && + git -c core.eol=lf checkout eol.utf${i} && + test_cmp_bin lf.utf${i}.raw eol.utf${i} && + + # The file LF in the working tree, ensure LF in the index + git ls-files --eol eol.utf${i} >actual && + test_cmp expectIndexLF actual + ' +done + +test_expect_success 'check unsupported encodings' ' + test_when_finished "git reset --hard HEAD" && + + echo "*.set text working-tree-encoding" >.gitattributes && + printf "set" >t.set && + test_must_fail git add t.set 2>err.out && + test_i18ngrep "true/false are no valid working-tree-encodings" err.out && + + echo "*.unset text -working-tree-encoding" >.gitattributes && + printf "unset" >t.unset && + git add t.unset && + + echo "*.empty text working-tree-encoding=" >.gitattributes && + printf "empty" >t.empty && + git add t.empty && + + echo "*.garbage text working-tree-encoding=garbage" >.gitattributes && + printf "garbage" >t.garbage && + test_must_fail git add t.garbage 2>err.out && + test_i18ngrep "failed to encode" err.out +' + +test_expect_success 'error if encoding round trip is not the same during refresh' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Add and commit a UTF-16 file but skip the "working-tree-encoding" + # filter. Consequently, the in-repo representation is UTF-16 and not + # UTF-8. This simulates a Git version that has no working tree encoding + # support. + echo "*.utf16le text working-tree-encoding=utf-16le" >.gitattributes && + echo "hallo" >nonsense.utf16le && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16le) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16le && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + test_must_fail git checkout HEAD^ 2>err.out && + test_i18ngrep "error: .* overwritten by checkout:" err.out +' + +test_expect_success 'error if encoding garbage is already in Git' ' + BEFORE_STATE=$(git rev-parse HEAD) && + test_when_finished "git reset --hard $BEFORE_STATE" && + + # Skip the UTF-16 filter for the added file + # This simulates a Git version that has no checkoutEncoding support + cp nobom.utf16be.raw nonsense.utf16 && + TEST_HASH=$(git hash-object --no-filters -w nonsense.utf16) && + git update-index --add --cacheinfo 100644 $TEST_HASH nonsense.utf16 && + COMMIT=$(git commit-tree -p $(git rev-parse HEAD) -m "plain commit" $(git write-tree)) && + git update-ref refs/heads/master $COMMIT && + + git diff 2>err.out && + test_i18ngrep "error: BOM is required" err.out +' + +test_expect_success 'check roundtrip encoding' ' + test_when_finished "rm -f roundtrip.shift roundtrip.utf16" && + test_when_finished "git reset --hard HEAD" && + + text="hallo there!\nroundtrip test here!" && + printf "$text" | iconv -f UTF-8 -t SHIFT-JIS >roundtrip.shift && + printf "$text" | iconv -f UTF-8 -t UTF-16 >roundtrip.utf16 && + echo "*.shift text working-tree-encoding=SHIFT-JIS" >>.gitattributes && + + # SHIFT-JIS encoded files are round-trip checked by default... + GIT_TRACE=1 git add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # ... unless we overwrite the Git config! + ! GIT_TRACE=1 git -c core.checkRoundtripEncoding=garbage \ + add .gitattributes roundtrip.shift 2>&1 | + grep "Checking roundtrip encoding for SHIFT-JIS" && + git reset && + + # UTF-16 encoded files should not be round-trip checked by default... + ! GIT_TRACE=1 git add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for UTF-16" && + git reset && + + # ... unless we tell Git to check it! + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-16, UTF-32" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset && + + # ... unless we tell Git to check it! + # (here we also check that the casing of the encoding is irrelevant) + GIT_TRACE=1 git -c core.checkRoundtripEncoding="UTF-32, utf-16" \ + add roundtrip.utf16 2>&1 | + grep "Checking roundtrip encoding for utf-16" && + git reset +' + +test_done diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index f46e3c4..21a8b53 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -349,4 +349,90 @@ test_submodule_relative_url "(null)" "ssh://hostname:22/repo" "../subrepo" "ssh: test_submodule_relative_url "(null)" "user@host:path/to/repo" "../subrepo" "user@host:path/to/subrepo" test_submodule_relative_url "(null)" "user@host:repo" "../subrepo" "user@host:subrepo" +test_expect_success 'match .gitmodules' ' + test-tool path-utils is_dotgitmodules \ + .gitmodules \ + \ + .git${u200c}modules \ + \ + .Gitmodules \ + .gitmoduleS \ + \ + ".gitmodules " \ + ".gitmodules." \ + ".gitmodules " \ + ".gitmodules. " \ + ".gitmodules ." \ + ".gitmodules.." \ + ".gitmodules " \ + ".gitmodules. " \ + ".gitmodules . " \ + ".gitmodules ." \ + \ + ".Gitmodules " \ + ".Gitmodules." \ + ".Gitmodules " \ + ".Gitmodules. " \ + ".Gitmodules ." \ + ".Gitmodules.." \ + ".Gitmodules " \ + ".Gitmodules. " \ + ".Gitmodules . " \ + ".Gitmodules ." \ + \ + GITMOD~1 \ + gitmod~1 \ + GITMOD~2 \ + gitmod~3 \ + GITMOD~4 \ + \ + "GITMOD~1 " \ + "gitmod~2." \ + "GITMOD~3 " \ + "gitmod~4. " \ + "GITMOD~1 ." \ + "gitmod~2 " \ + "GITMOD~3. " \ + "gitmod~4 . " \ + \ + GI7EBA~1 \ + gi7eba~9 \ + \ + GI7EB~10 \ + GI7EB~11 \ + GI7EB~99 \ + GI7EB~10 \ + GI7E~100 \ + GI7E~101 \ + GI7E~999 \ + ~1000000 \ + ~9999999 \ + \ + --not \ + ".gitmodules x" \ + ".gitmodules .x" \ + \ + " .gitmodules" \ + \ + ..gitmodules \ + \ + gitmodules \ + \ + .gitmodule \ + \ + ".gitmodules x " \ + ".gitmodules .x" \ + \ + GI7EBA~ \ + GI7EBA~0 \ + GI7EBA~~1 \ + GI7EBA~X \ + Gx7EBA~1 \ + GI7EBX~1 \ + \ + GI7EB~1 \ + GI7EB~01 \ + GI7EB~1X +' + test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index d03149b..c887ed5 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -145,7 +145,7 @@ test_trace () { expect="$1" shift GIT_TRACE=1 test-tool run-command "$@" run-command true 2>&1 >/dev/null | \ - sed 's/.* run_command: //' >actual && + sed -e 's/.* run_command: //' -e '/trace: .*/d' >actual && echo "$expect true" >expect && test_cmp expect actual } diff --git a/t/t0070-fundamental.sh b/t/t0070-fundamental.sh index 23fbe64..7b111a5 100755 --- a/t/t0070-fundamental.sh +++ b/t/t0070-fundamental.sh @@ -19,8 +19,8 @@ test_expect_success 'mktemp to nonexistent directory prints filename' ' test_expect_success POSIXPERM,SANITY 'mktemp to unwritable directory prints filename' ' mkdir cannotwrite && - chmod -w cannotwrite && test_when_finished "chmod +w cannotwrite" && + chmod -w cannotwrite && test_must_fail test-tool mktemp cannotwrite/testXXXXXX 2>err && grep "cannotwrite/test" err ' diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 4ae0995..0c61268 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -9,7 +9,7 @@ cache-tree extension. cmp_cache_tree () { test-tool dump-cache-tree | sed -e '/#(ref)/d' >actual && - sed "s/$_x40/SHA/" <actual >filtered && + sed "s/$OID_REGEX/SHA/" <actual >filtered && test_cmp "$1" filtered } diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index cc18b75..4984ca5 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -23,7 +23,15 @@ promise_and_delete () { delete_object repo "$HASH" } +test_expect_success 'extensions.partialclone without filter' ' + test_create_repo server && + git clone --filter="blob:none" "file://$(pwd)/server" client && + git -C client config --unset core.partialclonefilter && + git -C client fetch origin +' + test_expect_success 'missing reflog object, but promised by a commit, passes fsck' ' + rm -rf repo && test_create_repo repo && test_commit -C repo my_commit && diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh index 3c4d2d6..013c5a7 100755 --- a/t/t1000-read-tree-m-3way.sh +++ b/t/t1000-read-tree-m-3way.sh @@ -128,7 +128,7 @@ cat >expected <<\EOF EOF check_result () { - git ls-files --stage | sed -e 's/ '"$_x40"' / X /' >current && + git ls-files --stage | sed -e 's/ '"$OID_REGEX"' / X /' >current && test_cmp expected current } diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh index 5ededd8..1057a96 100755 --- a/t/t1001-read-tree-m-2way.sh +++ b/t/t1001-read-tree-m-2way.sh @@ -30,7 +30,7 @@ read_tree_twoway () { compare_change () { sed -n >current \ -e '/^--- /d; /^+++ /d; /^@@ /d;' \ - -e 's/^\([-+][0-7][0-7][0-7][0-7][0-7][0-7]\) '"$_x40"' /\1 X /p' \ + -e 's/^\([-+][0-7][0-7][0-7][0-7][0-7][0-7]\) '"$OID_REGEX"' /\1 X /p' \ "$1" test_cmp expected current } diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh index 7ca2e65..9c05f5e 100755 --- a/t/t1002-read-tree-m-u-2way.sh +++ b/t/t1002-read-tree-m-u-2way.sh @@ -16,7 +16,7 @@ compare_change () { -e '1{/^diff --git /d;}' \ -e '2{/^index /d;}' \ -e '/^--- /d; /^+++ /d; /^@@ /d;' \ - -e 's/^\(.[0-7][0-7][0-7][0-7][0-7][0-7]\) '"$_x40"' /\1 X /' "$1" + -e 's/^\(.[0-7][0-7][0-7][0-7][0-7][0-7]\) '"$OID_REGEX"' /\1 X /' "$1" test_cmp expected current } diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh index c7ce5d8..826cd32 100755 --- a/t/t1004-read-tree-m-u-wf.sh +++ b/t/t1004-read-tree-m-u-wf.sh @@ -179,6 +179,8 @@ test_expect_success 'funny symlink in work tree' ' test_expect_success SANITY 'funny symlink in work tree, un-unlink-able' ' + test_when_finished "chmod u+w a 2>/dev/null; rm -fr a b" && + rm -fr a b && git reset --hard && @@ -188,10 +190,6 @@ test_expect_success SANITY 'funny symlink in work tree, un-unlink-able' ' ' -# clean-up from the above test -chmod a+w a 2>/dev/null -rm -fr a b - test_expect_success 'D/F setup' ' git reset --hard && diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index 2ac3b94..13dd510 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -236,8 +236,8 @@ test_expect_success "--batch-check for an empty line" ' ' test_expect_success 'empty --batch-check notices missing object' ' - echo "$_z40 missing" >expect && - echo "$_z40" | git cat-file --batch-check="" >actual && + echo "$ZERO_OID missing" >expect && + echo "$ZERO_OID" | git cat-file --batch-check="" >actual && test_cmp expect actual ' @@ -294,8 +294,8 @@ test_expect_success 'setup blobs which are likely to delta' ' test_expect_success 'confirm that neither loose blob is a delta' ' cat >expect <<-EOF && - $_z40 - $_z40 + $ZERO_OID + $ZERO_OID EOF git cat-file --batch-check="%(deltabase)" <blobs >actual && test_cmp expect actual diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index 532682f..a377530 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -9,13 +9,13 @@ echo_without_newline() { } test_blob_does_not_exist() { - test_expect_success 'blob does not exist in database' " + test_expect_success SHA1 'blob does not exist in database' " test_must_fail git cat-file blob $1 " } test_blob_exists() { - test_expect_success 'blob exists in database' " + test_expect_success SHA1 'blob exists in database' " git cat-file blob $1 " } @@ -73,19 +73,19 @@ test_expect_success "Can't use --path with --no-filters" ' push_repo -test_expect_success 'hash a file' ' +test_expect_success SHA1 'hash a file' ' test $hello_sha1 = $(git hash-object hello) ' test_blob_does_not_exist $hello_sha1 -test_expect_success 'hash from stdin' ' +test_expect_success SHA1 'hash from stdin' ' test $example_sha1 = $(git hash-object --stdin < example) ' test_blob_does_not_exist $example_sha1 -test_expect_success 'hash a file and write to database' ' +test_expect_success SHA1 'hash a file and write to database' ' test $hello_sha1 = $(git hash-object -w hello) ' @@ -161,7 +161,7 @@ pop_repo for args in "-w --stdin" "--stdin -w"; do push_repo - test_expect_success "hash from stdin and write to database ($args)" ' + test_expect_success SHA1 "hash from stdin and write to database ($args)" ' test $example_sha1 = $(git hash-object $args < example) ' @@ -176,14 +176,14 @@ example" sha1s="$hello_sha1 $example_sha1" -test_expect_success "hash two files with names on stdin" ' +test_expect_success SHA1 "hash two files with names on stdin" ' test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" ' for args in "-w --stdin-paths" "--stdin-paths -w"; do push_repo - test_expect_success "hash two files with names on stdin and write to database ($args)" ' + test_expect_success SHA1 "hash two files with names on stdin and write to database ($args)" ' test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object $args)" ' diff --git a/t/t1012-read-tree-df.sh b/t/t1012-read-tree-df.sh index a6a04b6..57f0770 100755 --- a/t/t1012-read-tree-df.sh +++ b/t/t1012-read-tree-df.sh @@ -32,7 +32,7 @@ settree () { checkindex () { git ls-files -s | - sed "s|^[0-7][0-7]* $_x40 \([0-3]\) |\1 |" >current && + sed "s|^[0-7][0-7]* $OID_REGEX \([0-3]\) |\1 |" >current && cat >expect && test_cmp expect current } diff --git a/t/t1300-repo-config.sh b/t/t1300-config.sh index e95b1e6..03c2237 100755 --- a/t/t1300-repo-config.sh +++ b/t/t1300-config.sh @@ -108,6 +108,7 @@ bar = foo [beta] baz = multiple \ lines +foo = bar EOF test_expect_success 'unset with cont. lines' ' @@ -118,6 +119,7 @@ cat > expect <<\EOF [alpha] bar = foo [beta] +foo = bar EOF test_expect_success 'unset with cont. lines is correct' 'test_cmp expect .git/config' @@ -740,7 +742,7 @@ test_expect_success bool ' do git config --bool --get bool.true$i >>result git config --bool --get bool.false$i >>result - done && + done && test_cmp expect result' test_expect_success 'invalid bool (--get)' ' @@ -931,6 +933,36 @@ test_expect_success 'get --expiry-date' ' test_must_fail git config --expiry-date date.invalid1 ' +test_expect_success 'get --type=color' ' + rm .git/config && + git config foo.color "red" && + git config --get --type=color foo.color >actual.raw && + test_decode_color <actual.raw >actual && + echo "<RED>" >expect && + test_cmp expect actual +' + +cat >expect << EOF +[foo] + color = red +EOF + +test_expect_success 'set --type=color' ' + rm .git/config && + git config --type=color foo.color "red" && + test_cmp expect .git/config +' + +test_expect_success 'get --type=color barfs on non-color' ' + echo "[foo]bar=not-a-color" >.git/config && + test_must_fail git config --get --type=color foo.bar +' + +test_expect_success 'set --type=color barfs on non-color' ' + test_must_fail git config --type=color foo.color "not-a-color" 2>error && + test_i18ngrep "cannot parse color" error +' + cat > expect << EOF [quote] leading = " test" @@ -1411,7 +1443,7 @@ test_expect_success 'urlmatch with wildcard' ' ' # good section hygiene -test_expect_failure 'unsetting the last key in a section removes header' ' +test_expect_success '--unset last key removes section (except if commented)' ' cat >.git/config <<-\EOF && # some generic comment on the configuration file itself # a comment specific to this "section" section. @@ -1425,13 +1457,86 @@ test_expect_failure 'unsetting the last key in a section removes header' ' cat >expect <<-\EOF && # some generic comment on the configuration file itself + # a comment specific to this "section" section. + [section] + # some intervening lines + # that should also be dropped + + # please be careful when you update the above variable EOF git config --unset section.key && - test_cmp expect .git/config + test_cmp expect .git/config && + + cat >.git/config <<-\EOF && + [section] + key = value + [next-section] + EOF + + cat >expect <<-\EOF && + [next-section] + EOF + + git config --unset section.key && + test_cmp expect .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [two] + key = true + EOF + git config --unset two.key && + ! grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = "multiline \ + QQ# with comment" + [one] + key = true + EOF + git config --unset-all one.key && + test_line_count = 0 .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = true + Q# a comment not at the start + [two] + Qkey = true + EOF + git config --unset two.key && + grep two .git/config && + + q_to_tab >.git/config <<-\EOF && + [one] + Qkey = not [two "subsection"] + [two "subsection"] + [two "subsection"] + Qkey = true + [TWO "subsection"] + [one] + EOF + git config --unset two.subsection.key && + test "not [two subsection]" = "$(git config one.key)" && + test_line_count = 3 .git/config ' -test_expect_failure 'adding a key into an empty section reuses header' ' +test_expect_success '--unset-all removes section if empty & uncommented' ' + cat >.git/config <<-\EOF && + [section] + key = value1 + key = value2 + EOF + + git config --unset-all section.key && + test_line_count = 0 .git/config +' + +test_expect_success 'adding a key into an empty section reuses header' ' cat >.git/config <<-\EOF && [section] EOF @@ -1611,4 +1716,88 @@ test_expect_success '--local requires a repo' ' test_expect_code 128 nongit git config --local foo.bar ' +cat >.git/config <<-\EOF && +[core] +foo = true +number = 10 +big = 1M +EOF + +test_expect_success 'identical modern --type specifiers are allowed' ' + git config --type=int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical legacy --type specifiers are allowed' ' + git config --int --int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'identical mixed --type specifiers are allowed' ' + git config --int --type=int core.big >actual && + echo 1048576 >expect && + test_cmp expect actual +' + +test_expect_success 'non-identical modern --type specifiers are not allowed' ' + test_must_fail git config --type=int --type=bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical legacy --type specifiers are not allowed' ' + test_must_fail git config --int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success 'non-identical mixed --type specifiers are not allowed' ' + test_must_fail git config --type=int --bool core.big 2>error && + test_i18ngrep "only one type at a time" error +' + +test_expect_success '--type allows valid type specifiers' ' + echo "true" >expect && + git config --type=bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success '--no-type unsets type specifiers' ' + echo "10" >expect && + git config --type=bool --no-type core.number >actual && + test_cmp expect actual +' + +test_expect_success 'unset type specifiers may be reset to conflicting ones' ' + echo 1048576 >expect && + git config --type=bool --no-type --type=int core.big >actual && + test_cmp expect actual +' + +test_expect_success '--type rejects unknown specifiers' ' + test_must_fail git config --type=nonsense core.foo 2>error && + test_i18ngrep "unrecognized --type argument" error +' + +test_expect_success '--replace-all does not invent newlines' ' + q_to_tab >.git/config <<-\EOF && + [abc]key + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = a + EOF + q_to_tab >expect <<-\EOF && + [abc] + QkeepSection + [xyz] + Qkey = 1 + [abc] + Qkey = b + EOF + git config --replace-all abc.key b && + test_cmp .git/config expect +' + test_done diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index eed31ff..37dc689 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -73,4 +73,8 @@ test_expect_success 'can parse blob ending with CR' ' test_cmp expect actual ' +test_expect_success 'config --blob outside of a repository is an error' ' + test_must_fail nongit git config --blob=foo --list +' + test_done diff --git a/t/t1310-config-default.sh b/t/t1310-config-default.sh new file mode 100755 index 0000000..6049d91 --- /dev/null +++ b/t/t1310-config-default.sh @@ -0,0 +1,36 @@ +#!/bin/sh + +test_description='Test git config in different settings (with --default)' + +. ./test-lib.sh + +test_expect_success 'uses --default when entry missing' ' + echo quux >expect && + git config -f config --default=quux core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'does not use --default when entry present' ' + echo bar >expect && + git -c core.foo=bar config --default=baz core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'canonicalizes --default with appropriate type' ' + echo true >expect && + git config -f config --default=yes --bool core.foo >actual && + test_cmp expect actual +' + +test_expect_success 'dies when --default cannot be parsed' ' + test_must_fail git config -f config --type=expiry-date --default=x --get \ + not.a.section 2>error && + test_i18ngrep "failed to format default config value" error +' + +test_expect_success 'does not allow --default without --get' ' + test_must_fail git config --default=quux --unset a.section >output 2>&1 && + test_i18ngrep "\-\-default is only applicable to" output +' + +test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 664a3a4..e1fd0f0 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -6,7 +6,7 @@ test_description='Test git update-ref and basic ref logging' . ./test-lib.sh -Z=$_z40 +Z=$ZERO_OID m=refs/heads/master n_dir=refs/heads/gu @@ -457,6 +457,66 @@ test_expect_success 'git cat-file blob master@{2005-05-26 23:42}:F (expect OTHER test OTHER = $(git cat-file blob "master@{2005-05-26 23:42}:F") ' +# Test adding and deleting pseudorefs + +test_expect_success 'given old value for missing pseudoref, do not create' ' + test_must_fail git update-ref PSEUDOREF $A $B 2>err && + test_path_is_missing .git/PSEUDOREF && + grep "could not read ref" err +' + +test_expect_success 'create pseudoref' ' + git update-ref PSEUDOREF $A && + test $A = $(cat .git/PSEUDOREF) +' + +test_expect_success 'overwrite pseudoref with no old value given' ' + git update-ref PSEUDOREF $B && + test $B = $(cat .git/PSEUDOREF) +' + +test_expect_success 'overwrite pseudoref with correct old value' ' + git update-ref PSEUDOREF $C $B && + test $C = $(cat .git/PSEUDOREF) +' + +test_expect_success 'do not overwrite pseudoref with wrong old value' ' + test_must_fail git update-ref PSEUDOREF $D $E 2>err && + test $C = $(cat .git/PSEUDOREF) && + grep "unexpected object ID" err +' + +test_expect_success 'delete pseudoref' ' + git update-ref -d PSEUDOREF && + test_path_is_missing .git/PSEUDOREF +' + +test_expect_success 'do not delete pseudoref with wrong old value' ' + git update-ref PSEUDOREF $A && + test_must_fail git update-ref -d PSEUDOREF $B 2>err && + test $A = $(cat .git/PSEUDOREF) && + grep "unexpected object ID" err +' + +test_expect_success 'delete pseudoref with correct old value' ' + git update-ref -d PSEUDOREF $A && + test_path_is_missing .git/PSEUDOREF +' + +test_expect_success 'create pseudoref with old OID zero' ' + git update-ref PSEUDOREF $A $Z && + test $A = $(cat .git/PSEUDOREF) +' + +test_expect_success 'do not overwrite pseudoref with old OID zero' ' + test_when_finished git update-ref -d PSEUDOREF && + test_must_fail git update-ref PSEUDOREF $B $Z 2>err && + test $A = $(cat .git/PSEUDOREF) && + grep "already exists" err +' + +# Test --stdin + a=refs/heads/a b=refs/heads/b c=refs/heads/c diff --git a/t/t1401-symbolic-ref.sh b/t/t1401-symbolic-ref.sh index 9e782a8..a4ebb0b 100755 --- a/t/t1401-symbolic-ref.sh +++ b/t/t1401-symbolic-ref.sh @@ -65,7 +65,7 @@ reset_to_sane test_expect_success 'symbolic-ref fails to delete real ref' ' echo "fatal: Cannot delete refs/heads/foo, not a symbolic ref" >expect && test_must_fail git symbolic-ref -d refs/heads/foo >actual 2>&1 && - test_path_is_file .git/refs/heads/foo && + git rev-parse --verify refs/heads/foo && test_cmp expect actual ' reset_to_sane diff --git a/t/t1407-worktree-ref-store.sh b/t/t1407-worktree-ref-store.sh index 2211f98..4623ae1 100755 --- a/t/t1407-worktree-ref-store.sh +++ b/t/t1407-worktree-ref-store.sh @@ -50,13 +50,13 @@ test_expect_success 'create_symref(FOO, refs/heads/master)' ' ' test_expect_success 'for_each_reflog()' ' - echo $_z40 > .git/logs/PSEUDO-MAIN && + echo $ZERO_OID > .git/logs/PSEUDO-MAIN && mkdir -p .git/logs/refs/bisect && - echo $_z40 > .git/logs/refs/bisect/random && + echo $ZERO_OID > .git/logs/refs/bisect/random && - echo $_z40 > .git/worktrees/wt/logs/PSEUDO-WT && + echo $ZERO_OID > .git/worktrees/wt/logs/PSEUDO-WT && mkdir -p .git/worktrees/wt/logs/refs/bisect && - echo $_z40 > .git/worktrees/wt/logs/refs/bisect/wt-random && + echo $ZERO_OID > .git/worktrees/wt/logs/refs/bisect/wt-random && $RWT for-each-reflog | cut -c 42- | sort >actual && cat >expected <<-\EOF && diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index cb4b66e..91fd714 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -713,7 +713,7 @@ test_expect_success 'fsck notices dangling objects' ' test_expect_success 'fsck $name notices bogus $name' ' test_must_fail git fsck bogus && - test_must_fail git fsck $_z40 + test_must_fail git fsck $ZERO_OID ' test_expect_success 'bogus head does not fallback to all heads' ' @@ -723,7 +723,7 @@ test_expect_success 'bogus head does not fallback to all heads' ' blob=$(git rev-parse :foo) && test_when_finished "git rm --cached foo" && remove_object $blob && - test_must_fail git fsck $_z40 >out 2>&1 && + test_must_fail git fsck $ZERO_OID >out 2>&1 && ! grep $blob out ' diff --git a/t/t1501-work-tree.sh b/t/t1501-work-tree.sh index 02cf201..afcdfaf 100755 --- a/t/t1501-work-tree.sh +++ b/t/t1501-work-tree.sh @@ -238,10 +238,10 @@ test_expect_success '_gently() groks relative GIT_DIR & GIT_WORK_TREE' ' test_expect_success 'diff-index respects work tree under .git dir' ' cat >diff-index-cached.expected <<-EOF && - :000000 100644 $_z40 $EMPTY_BLOB A sub/dir/tracked + :000000 100644 $ZERO_OID $EMPTY_BLOB A sub/dir/tracked EOF cat >diff-index.expected <<-EOF && - :000000 100644 $_z40 $_z40 A sub/dir/tracked + :000000 100644 $ZERO_OID $ZERO_OID A sub/dir/tracked EOF ( @@ -257,7 +257,7 @@ test_expect_success 'diff-index respects work tree under .git dir' ' test_expect_success 'diff-files respects work tree under .git dir' ' cat >diff-files.expected <<-EOF && - :100644 100644 $EMPTY_BLOB $_z40 M sub/dir/tracked + :100644 100644 $EMPTY_BLOB $ZERO_OID M sub/dir/tracked EOF ( @@ -431,4 +431,16 @@ test_expect_success 'error out gracefully on invalid $GIT_WORK_TREE' ' ) ' +test_expect_success 'refs work with relative gitdir and work tree' ' + git init relative && + git -C relative commit --allow-empty -m one && + git -C relative commit --allow-empty -m two && + + GIT_DIR=relative/.git GIT_WORK_TREE=relative git reset HEAD^ && + + git -C relative log -1 --format=%s >actual && + echo one >expect && + test_cmp expect actual +' + test_done diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index e6854b8..972bd9c 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -238,7 +238,6 @@ test_expect_success '#0: nonbare repo, no explicit configuration' ' ' test_expect_success '#1: GIT_WORK_TREE without explicit GIT_DIR is accepted' ' - mkdir -p wt && try_repo 1 "$here" unset unset "" unset \ "$here/1/.git" "$here" "$here" 1/ \ "$here/1/.git" "$here" "$here" 1/sub/ 2>message && diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index 711704b..96fe375 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -22,6 +22,12 @@ one tagged as v1.0.0. They all have one regular file each. . ./test-lib.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + test_expect_success 'blob and tree' ' test_tick && ( @@ -361,4 +367,25 @@ test_expect_success 'core.disambiguate does not override context' ' git -c core.disambiguate=committish rev-parse $sha1^{tree} ' +test_expect_success C_LOCALE_OUTPUT 'ambiguous commits are printed by type first, then hash order' ' + test_must_fail git rev-parse 0000 2>stderr && + grep ^hint: stderr >hints && + grep 0000 hints >objects && + cat >expected <<-\EOF && + tag + commit + tree + blob + EOF + awk "{print \$3}" <objects >objects.types && + uniq <objects.types >objects.types.uniq && + test_cmp expected objects.types.uniq && + for type in tag commit tree blob + do + grep $type objects >$type.objects && + sort $type.objects >$type.objects.sorted && + test_cmp $type.objects.sorted $type.objects + done +' + test_done diff --git a/t/t1601-index-bogus.sh b/t/t1601-index-bogus.sh index 73cc932..4171f1e 100755 --- a/t/t1601-index-bogus.sh +++ b/t/t1601-index-bogus.sh @@ -4,7 +4,7 @@ test_description='test handling of bogus index entries' . ./test-lib.sh test_expect_success 'create tree with null sha1' ' - tree=$(printf "160000 commit $_z40\\tbroken\\n" | git mktree) + tree=$(printf "160000 commit $ZERO_OID\\tbroken\\n" | git mktree) ' test_expect_success 'read-tree refuses to read null sha1' ' diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index e4f4c4d..1e81b33 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -426,7 +426,7 @@ test_expect_success 'writing split index with null sha1 does not write cache tre git commit -m "commit" && { git ls-tree HEAD && - printf "160000 commit $_z40\\tbroken\\n" + printf "160000 commit $ZERO_OID\\tbroken\\n" } >broken-tree && echo "add broken entry" >msg && diff --git a/t/t2011-checkout-invalid-head.sh b/t/t2011-checkout-invalid-head.sh index c5501b0..0e8d56a 100755 --- a/t/t2011-checkout-invalid-head.sh +++ b/t/t2011-checkout-invalid-head.sh @@ -15,7 +15,7 @@ test_expect_success 'checkout should not start branch from a tree' ' ' test_expect_success 'checkout master from invalid HEAD' ' - echo $_z40 >.git/HEAD && + echo $ZERO_OID >.git/HEAD && git checkout master -- ' diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index e74d58b..fc3eb43 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -73,8 +73,8 @@ test_expect_success 'do not touch files that are already up-to-date' ' git checkout HEAD -- file1 file2 && echo one >expect && test_cmp expect file1 && - echo "1000000000 file2" >expect && - test-tool chmtime -v +0 file2 >actual && + echo "1000000000" >expect && + test-tool chmtime --get file2 >actual && test_cmp expect actual ' diff --git a/t/t2025-worktree-add.sh b/t/t2025-worktree-add.sh index d0d2e4f..d2e49f7 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2025-worktree-add.sh @@ -198,13 +198,25 @@ test_expect_success '"add" with <branch> omitted' ' test_cmp_rev HEAD bat ' -test_expect_success '"add" auto-vivify does not clobber existing branch' ' - test_commit c1 && - test_commit c2 && - git branch precious HEAD~1 && - test_must_fail git worktree add precious && - test_cmp_rev HEAD~1 precious && - test_path_is_missing precious +test_expect_success '"add" checks out existing branch of dwimd name' ' + git branch dwim HEAD~1 && + git worktree add dwim && + test_cmp_rev HEAD~1 dwim && + ( + cd dwim && + test_cmp_rev HEAD dwim + ) +' + +test_expect_success '"add <path>" dwim fails with checked out branch' ' + git checkout -b test-branch && + test_must_fail git worktree add test-branch && + test_path_is_missing test-branch +' + +test_expect_success '"add --force" with existing dwimd name doesnt die' ' + git checkout test-branch && + git worktree add --force test-branch ' test_expect_success '"add" no auto-vivify with --detach and <branch> omitted' ' @@ -465,7 +477,7 @@ post_checkout_hook () { test_expect_success '"add" invokes post-checkout hook (branch)' ' post_checkout_hook && { - echo $_z40 $(git rev-parse HEAD) 1 && + echo $ZERO_OID $(git rev-parse HEAD) 1 && echo $(pwd)/.git/worktrees/gumby && echo $(pwd)/gumby } >hook.expect && @@ -476,7 +488,7 @@ test_expect_success '"add" invokes post-checkout hook (branch)' ' test_expect_success '"add" invokes post-checkout hook (detached)' ' post_checkout_hook && { - echo $_z40 $(git rev-parse HEAD) 1 && + echo $ZERO_OID $(git rev-parse HEAD) 1 && echo $(pwd)/.git/worktrees/grumpy && echo $(pwd)/grumpy } >hook.expect && @@ -494,7 +506,7 @@ test_expect_success '"add --no-checkout" suppresses post-checkout hook' ' test_expect_success '"add" in other worktree invokes post-checkout hook' ' post_checkout_hook && { - echo $_z40 $(git rev-parse HEAD) 1 && + echo $ZERO_OID $(git rev-parse HEAD) 1 && echo $(pwd)/.git/worktrees/guppy && echo $(pwd)/guppy } >hook.expect && @@ -506,7 +518,7 @@ test_expect_success '"add" in bare repo invokes post-checkout hook' ' rm -rf bare && git clone --bare . bare && { - echo $_z40 $(git --git-dir=bare rev-parse HEAD) 1 && + echo $ZERO_OID $(git --git-dir=bare rev-parse HEAD) 1 && echo $(pwd)/bare/worktrees/goozy && echo $(pwd)/goozy } >hook.expect && diff --git a/t/t2027-worktree-list.sh b/t/t2027-worktree-list.sh index 720063b..bb6fb9b 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2027-worktree-list.sh @@ -116,7 +116,7 @@ test_expect_success 'broken main worktree still at the top' ' git worktree add linked && cat >expected <<-EOF && worktree $(pwd) - HEAD $_z40 + HEAD $ZERO_OID EOF cd linked && diff --git a/t/t2028-worktree-move.sh b/t/t2028-worktree-move.sh index 5d5b363..5f7d45b 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2028-worktree-move.sh @@ -72,12 +72,11 @@ test_expect_success 'move locked worktree' ' ' test_expect_success 'move worktree' ' - toplevel="$(pwd)" && git worktree move source destination && test_path_is_missing source && git worktree list --porcelain >out && - grep "^worktree.*/destination" out && - ! grep "^worktree.*/source" out && + grep "^worktree.*/destination$" out && + ! grep "^worktree.*/source$" out && git -C destination log --format=%s >actual2 && echo init >expected2 && test_cmp expected2 actual2 @@ -93,7 +92,7 @@ test_expect_success 'move worktree to another dir' ' test_when_finished "git worktree move some-dir/destination destination" && test_path_is_missing destination && git worktree list --porcelain >out && - grep "^worktree.*/some-dir/destination" out && + grep "^worktree.*/some-dir/destination$" out && git -C some-dir/destination log --format=%s >actual2 && echo init >expected2 && test_cmp expected2 actual2 diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 1db7e6a..2242cd0 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -37,7 +37,7 @@ test_expect_success '--cacheinfo does not accept blob null sha1' ' echo content >file && git add file && git rev-parse :file >expect && - test_must_fail git update-index --cacheinfo 100644 $_z40 file && + test_must_fail git update-index --cacheinfo 100644 $ZERO_OID file && git rev-parse :file >actual && test_cmp expect actual ' @@ -47,7 +47,7 @@ test_expect_success '--cacheinfo does not accept gitlink null sha1' ' (cd submodule && test_commit foo) && git add submodule && git rev-parse :submodule >expect && - test_must_fail git update-index --cacheinfo 160000 $_z40 submodule && + test_must_fail git update-index --cacheinfo 160000 $ZERO_OID submodule && git rev-parse :submodule >actual && test_cmp expect actual ' diff --git a/t/t2201-add-update-typechange.sh b/t/t2201-add-update-typechange.sh index 954fc51..a4eec0a 100755 --- a/t/t2201-add-update-typechange.sh +++ b/t/t2201-add-update-typechange.sh @@ -75,35 +75,35 @@ test_expect_success modify ' git ls-tree -r HEAD | sed -e "s/^/:/" -e " / caskly/{ - s/ caskly/ $_z40 D&/ + s/ caskly/ $ZERO_OID D&/ s/blob/000000/ } / nitfol/{ - s/ nitfol/ $_z40 $T_letter&/ + s/ nitfol/ $ZERO_OID $T_letter&/ s/blob/100644/ } / rezrov.bozbar/{ - s/ rezrov.bozbar/ $_z40 D&/ + s/ rezrov.bozbar/ $ZERO_OID D&/ s/blob/000000/ } / xyzzy/{ - s/ xyzzy/ $_z40 D&/ + s/ xyzzy/ $ZERO_OID D&/ s/blob/000000/ } / yomin/{ - s/ yomin/ $_z40 T&/ + s/ yomin/ $ZERO_OID T&/ s/blob/160000/ } " } >expect && { cat expect - echo ":100644 160000 $_empty $_z40 T yonk" - echo ":100644 000000 $_empty $_z40 D zifmia" + echo ":100644 160000 $_empty $ZERO_OID T yonk" + echo ":100644 000000 $_empty $ZERO_OID D zifmia" } >expect-files && { cat expect - echo ":000000 160000 $_z40 $_z40 A yonk" + echo ":000000 160000 $ZERO_OID $ZERO_OID A yonk" } >expect-index && { echo "100644 $_empty 0 nitfol" diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 78236dc..e7a400b 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -27,12 +27,12 @@ test_expect_success 'git status' ' test_expect_success 'git status with porcelain v2' ' git status --porcelain=v2 | grep -v "^?" >actual && - nam1=d00491fd7e5bb6fa28c517a0bb32b8b506539d4d && - nam2=ce013625030ba8dba906f756967f9e9ca394464a && + nam1=$(echo 1 | git hash-object --stdin) && + nam2=$(git hash-object elif) && cat >expect <<-EOF && - 1 DA N... 100644 000000 100644 $nam1 $_z40 1.t - 1 A. N... 000000 100644 100644 $_z40 $nam2 elif - 1 .A N... 000000 000000 100644 $_z40 $_z40 file + 1 DA N... 100644 000000 100644 $nam1 $ZERO_OID 1.t + 1 A. N... 000000 100644 100644 $ZERO_OID $nam2 elif + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID file EOF test_cmp expect actual ' @@ -70,8 +70,7 @@ test_expect_success 'i-t-a entry is simply ignored' ' git commit -m second && test $(git ls-tree HEAD -- nitfol | wc -l) = 0 && test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 && - test $(git diff --name-only --ita-invisible-in-index HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only --ita-invisible-in-index -- nitfol | wc -l) = 1 + test $(git diff --name-only -- nitfol | wc -l) = 1 ' test_expect_success 'can commit with an unrelated i-t-a entry in index' ' @@ -99,13 +98,13 @@ test_expect_success 'cache-tree invalidates i-t-a paths' ' : >dir/bar && git add -N dir/bar && - git diff --cached --name-only >actual && + git diff --name-only >actual && echo dir/bar >expect && test_cmp expect actual && git write-tree >/dev/null && - git diff --cached --name-only >actual && + git diff --name-only >actual && echo dir/bar >expect && test_cmp expect actual ' @@ -181,12 +180,24 @@ test_expect_success 'rename detection finds the right names' ' EOF test_cmp expected.2 actual.2 && - hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + hash=$(git hash-object third) && git status --porcelain=v2 | grep -v "^?" >actual.3 && cat >expected.3 <<-EOF && 2 .R N... 100644 100644 100644 $hash $hash R100 third first EOF - test_cmp expected.3 actual.3 + test_cmp expected.3 actual.3 && + + git diff --stat >actual.4 && + cat >expected.4 <<-EOF && + first => third | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + test_cmp expected.4 actual.4 && + + git diff --cached --stat >actual.5 && + : >expected.5 && + test_cmp expected.5 actual.5 + ) ' @@ -212,7 +223,7 @@ test_expect_success 'double rename detection in status' ' EOF test_cmp expected.2 actual.2 && - hash=12f00e90b6ef79117ce6e650416b8cf517099b78 && + hash=$(git hash-object third) && git status --porcelain=v2 | grep -v "^?" >actual.3 && cat >expected.3 <<-EOF && 2 R. N... 100644 100644 100644 $hash $hash R100 second first @@ -222,5 +233,46 @@ test_expect_success 'double rename detection in status' ' ) ' -test_done +test_expect_success 'diff-files/diff-cached shows ita as new/not-new files' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff --summary >actual && + echo " create mode 100644 new-ita" >expected && + test_cmp expected actual && + git diff --cached --summary >actual2 && + : >expected2 && + test_cmp expected2 actual2 +' + +test_expect_success '"diff HEAD" includes ita as new files' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff HEAD >actual && + cat >expected <<-\EOF && + diff --git a/new-ita b/new-ita + new file mode 100644 + index 0000000..3e75765 + --- /dev/null + +++ b/new-ita + @@ -0,0 +1 @@ + +new + EOF + test_cmp expected actual +' + +test_expect_success 'apply --intent-to-add' ' + git reset --hard && + echo new >new-ita && + git add -N new-ita && + git diff >expected && + grep "new file" expected && + git reset --hard && + git apply --intent-to-add expected && + git diff >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t3034-merge-recursive-rename-options.sh b/t/t3034-merge-recursive-rename-options.sh index b9c4028..3d9fae6 100755 --- a/t/t3034-merge-recursive-rename-options.sh +++ b/t/t3034-merge-recursive-rename-options.sh @@ -309,4 +309,22 @@ test_expect_success 'last wins in --find-renames=<m> --rename-threshold=<n>' ' check_threshold_0 ' +test_expect_success 'merge.renames disables rename detection' ' + git read-tree --reset -u HEAD && + git -c merge.renames=false merge-recursive $tail && + check_no_renames +' + +test_expect_success 'merge.renames defaults to diff.renames' ' + git read-tree --reset -u HEAD && + git -c diff.renames=false merge-recursive $tail && + check_no_renames +' + +test_expect_success 'merge.renames overrides diff.renames' ' + git read-tree --reset -u HEAD && + test_must_fail git -c diff.renames=false -c merge.renames=true merge-recursive $tail && + $check_50 +' + test_done diff --git a/t/t3100-ls-tree-restrict.sh b/t/t3100-ls-tree-restrict.sh index 325114f..18baf49 100755 --- a/t/t3100-ls-tree-restrict.sh +++ b/t/t3100-ls-tree-restrict.sh @@ -32,7 +32,7 @@ test_expect_success \ echo $tree' test_output () { - sed -e "s/ $_x40 / X /" <current >check + sed -e "s/ $OID_REGEX / X /" <current >check test_cmp expected check } diff --git a/t/t3101-ls-tree-dirname.sh b/t/t3101-ls-tree-dirname.sh index 327ded4..12bf310 100755 --- a/t/t3101-ls-tree-dirname.sh +++ b/t/t3101-ls-tree-dirname.sh @@ -40,7 +40,7 @@ test_expect_success 'setup' ' ' test_output () { - sed -e "s/ $_x40 / X /" <current >check && + sed -e "s/ $OID_REGEX / X /" <current >check && test_cmp expected check } diff --git a/t/t3103-ls-tree-misc.sh b/t/t3103-ls-tree-misc.sh index 09dcf04..1452091 100755 --- a/t/t3103-ls-tree-misc.sh +++ b/t/t3103-ls-tree-misc.sh @@ -17,7 +17,8 @@ test_expect_success 'setup' ' ' test_expect_success 'ls-tree fails with non-zero exit code on broken tree' ' - rm -f .git/objects/5f/cffbd6e4c5c5b8d81f5e9314b20e338e3ffff5 && + tree=$(git rev-parse HEAD:a) && + rm -f .git/objects/$(echo $tree | sed -e "s,^\(..\),\1/,") && test_must_fail git ls-tree -r HEAD ' diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 6c0b7ea..0846798 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -6,6 +6,7 @@ test_description='git branch assorted tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh test_expect_success 'prepare a trivial repository' ' echo Hello >A && @@ -46,7 +47,7 @@ test_expect_success 'git branch HEAD should fail' ' ' cat >expect <<EOF -$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$ZERO_OID $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF test_expect_success 'git branch -l d/e/f should create a branch and a log' ' GIT_COMMITTER_DATE="2005-05-26 23:30" \ @@ -233,34 +234,34 @@ test_expect_success 'git branch -M master2 master2 should work when master is ch test_expect_success 'git branch -v -d t should work' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse --verify refs/heads/t && git branch -v -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse --verify refs/heads/t ' test_expect_success 'git branch -v -m t s should work' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse --verify refs/heads/t && git branch -v -m t s && - test_path_is_missing .git/refs/heads/t && - test_path_is_file .git/refs/heads/s && + test_must_fail git rev-parse --verify refs/heads/t && + git rev-parse --verify refs/heads/s && git branch -d s ' test_expect_success 'git branch -m -d t s should fail' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse refs/heads/t && test_must_fail git branch -m -d t s && git branch -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse refs/heads/t ' test_expect_success 'git branch --list -d t should fail' ' git branch t && - test_path_is_file .git/refs/heads/t && + git rev-parse refs/heads/t && test_must_fail git branch --list -d t && git branch -d t && - test_path_is_missing .git/refs/heads/t + test_must_fail git rev-parse refs/heads/t ' test_expect_success 'git branch --list -v with --abbrev' ' @@ -884,7 +885,7 @@ test_expect_success 'test --unset-upstream on a particular branch' ' test_must_fail git config branch.my14.merge ' -test_expect_success '--set-upstream fails' ' +test_expect_success 'disabled option --set-upstream fails' ' test_must_fail git branch --set-upstream origin/master ' @@ -900,7 +901,7 @@ test_expect_success '--set-upstream-to notices an error to set branch as own ups # Keep this test last, as it changes the current branch cat >expect <<EOF -$_z40 $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master +$ZERO_OID $HEAD $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 branch: Created from master EOF test_expect_success 'git checkout -b g/h/i -l should create a branch and a log' ' GIT_COMMITTER_DATE="2005-05-26 23:30" \ @@ -1246,6 +1247,29 @@ test_expect_success '--merged is incompatible with --no-merged' ' test_must_fail git branch --merged HEAD --no-merged HEAD ' +test_expect_success '--list during rebase' ' + test_when_finished "reset_rebase" && + git checkout master && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing master" actual +' + +test_expect_success '--list during rebase from detached HEAD' ' + test_when_finished "reset_rebase && git checkout master" && + git checkout master^0 && + oid=$(git rev-parse --short HEAD) && + FAKE_LINES="1 edit 2" && + export FAKE_LINES && + set_fake_editor && + git rebase -i HEAD~2 && + git branch --list >actual && + test_i18ngrep "rebasing detached HEAD $oid" actual +' + test_expect_success 'tracking with unexpected .fetch refspec' ' rm -rf a b c d && git init a && diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 756de26..352a52e 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -717,7 +717,7 @@ test_expect_success 'avoid unnecessary reset' ' set_fake_editor && git rebase -i HEAD~4 && test $HEAD = $(git rev-parse HEAD) && - MTIME=$(test-tool chmtime -v +0 file3 | sed 's/[^0-9].*$//') && + MTIME=$(test-tool chmtime --get file3) && test 123456789 = $MTIME ' @@ -971,6 +971,16 @@ test_expect_success 'rebase -i --root fixup root commit' ' test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) ' +test_expect_success 'rebase -i --root reword root commit' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b reword-root-branch master && + set_fake_editor && + FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ + git rebase -i --root && + git show HEAD^ | grep "A changed" && + test -z "$(git show -s --format=%p HEAD^)" +' + test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' ' git reset --hard && git checkout conflict-branch && @@ -1204,10 +1214,6 @@ test_expect_success 'drop' ' test A = $(git cat-file commit HEAD^^ | sed -ne \$p) ' -cat >expect <<EOF -Successfully rebased and updated refs/heads/missing-commit. -EOF - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' test_config rebase.missingCommitsCheck ignore && rebase_setup_and_clean missing-commit && @@ -1215,7 +1221,9 @@ test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' FAKE_LINES="1 2 3 4" \ git rebase -i --root 2>actual && test D = $(git cat-file commit HEAD | sed -ne \$p) && - test_i18ncmp expect actual + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual ' cat >expect <<EOF @@ -1227,15 +1235,24 @@ To avoid this message, use "drop" to explicitly remove a commit. Use 'git config rebase.missingCommitsCheck' to change the level of warnings. The possible behaviours are: ignore, warn, error. +Rebasing (1/4) +Rebasing (2/4) +Rebasing (3/4) +Rebasing (4/4) Successfully rebased and updated refs/heads/missing-commit. EOF +cr_to_nl () { + tr '\015' '\012' +} + test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' test_config rebase.missingCommitsCheck warn && rebase_setup_and_clean missing-commit && set_fake_editor && FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual && + git rebase -i --root 2>actual.2 && + cr_to_nl <actual.2 >actual && test_i18ncmp expect actual && test D = $(git cat-file commit HEAD | sed -ne \$p) ' diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 9214d0b..03bf1b8 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -88,6 +88,55 @@ test_expect_success 'rebase passes merge strategy options correctly' ' git rebase --continue ' +test_expect_success '--skip after failed fixup cleans commit message' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b with-conflicting-fixup && + test_commit wants-fixup && + test_commit "fixup! wants-fixup" wants-fixup.t 1 wants-fixup-1 && + test_commit "fixup! wants-fixup" wants-fixup.t 2 wants-fixup-2 && + test_commit "fixup! wants-fixup" wants-fixup.t 3 wants-fixup-3 && + test_must_fail env FAKE_LINES="1 fixup 2 squash 4" \ + git rebase -i HEAD~4 && + + : now there is a conflict, and comments in the commit message && + git show HEAD >out && + grep "fixup! wants-fixup" out && + + : skip and continue && + echo "cp \"\$1\" .git/copy.txt" | write_script copy-editor.sh && + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + + : the user should not have had to edit the commit message && + test_path_is_missing .git/copy.txt && + + : now the comments in the commit message should have been cleaned up && + git show HEAD >out && + ! grep "fixup! wants-fixup" out && + + : now, let us ensure that "squash" is handled correctly && + git reset --hard wants-fixup-3 && + test_must_fail env FAKE_LINES="1 squash 4 squash 2 squash 4" \ + git rebase -i HEAD~4 && + + : the first squash failed, but there are two more in the chain && + (test_set_editor "$PWD/copy-editor.sh" && + test_must_fail git rebase --skip) && + + : not the final squash, no need to edit the commit message && + test_path_is_missing .git/copy.txt && + + : The first squash was skipped, therefore: && + git show HEAD >out && + test_i18ngrep "# This is a combination of 2 commits" out && + + (test_set_editor "$PWD/copy-editor.sh" && git rebase --skip) && + git show HEAD >out && + test_i18ngrep ! "# This is a combination" out && + + : Final squash failed, but there was still a squash && + test_i18ngrep "# This is a combination of 2 commits" .git/copy.txt +' + test_expect_success 'setup rerere database' ' rm -fr .git/rebase-* && git reset --hard commit-new-file-F3-on-topic-branch && diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 68fe200..99b2aac 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -199,7 +199,7 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success -m test_run_rebase success -i test_run_rebase failure -p @@ -214,9 +214,10 @@ test_run_rebase () { " } test_run_rebase success '' -test_run_rebase failure -m -test_run_rebase failure -i +test_run_rebase success -m +test_run_rebase success -i test_run_rebase failure -p +test_run_rebase success --rebase-merges # m # / @@ -327,9 +328,9 @@ test_run_rebase () { test_cmp_rev c HEAD " } -test_run_rebase failure '' -test_run_rebase failure -m -test_run_rebase failure -i +test_run_rebase success '' +test_run_rebase success -m +test_run_rebase success -i test_run_rebase failure -p test_run_rebase () { diff --git a/t/t3428-rebase-signoff.sh b/t/t3428-rebase-signoff.sh index 2afb564..f6993b7 100755 --- a/t/t3428-rebase-signoff.sh +++ b/t/t3428-rebase-signoff.sh @@ -12,6 +12,13 @@ cat >file <<EOF a EOF +# Expected commit message for initial commit after rebase --signoff +cat >expected-initial-signed <<EOF +Initial empty commit + +Signed-off-by: $(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") +EOF + # Expected commit message after rebase --signoff cat >expected-signed <<EOF first @@ -43,4 +50,35 @@ test_expect_success 'rebase --no-signoff does not add a sign-off line' ' test_cmp expected-unsigned actual ' +test_expect_success 'rebase --exec --signoff adds a sign-off line' ' + test_when_finished "rm exec" && + git commit --amend -m "first" && + git rebase --exec "touch exec" --signoff HEAD^ && + test_path_is_file exec && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase --root --signoff adds a sign-off line' ' + git commit --amend -m "first" && + git rebase --root --keep-empty --signoff && + git cat-file commit HEAD^ | sed -e "1,/^\$/d" >actual && + test_cmp expected-initial-signed actual && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -i --signoff fails' ' + git commit --amend -m "first" && + git rebase -i --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' + +test_expect_success 'rebase -m --signoff fails' ' + git commit --amend -m "first" && + git rebase -m --signoff HEAD^ && + git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + test_cmp expected-signed actual +' test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh new file mode 100755 index 0000000..78f7c99 --- /dev/null +++ b/t/t3430-rebase-merges.sh @@ -0,0 +1,332 @@ +#!/bin/sh +# +# Copyright (c) 2018 Johannes E. Schindelin +# + +test_description='git rebase -i --rebase-merges + +This test runs git rebase "interactively", retaining the branch structure by +recreating merge commits. + +Initial setup: + + -- B -- (first) + / \ + A - C - D - E - H (master) + \ / + F - G (second) +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_cmp_graph () { + cat >expect && + git log --graph --boundary --format=%s "$@" >output && + sed "s/ *$//" <output >output.trimmed && + test_cmp expect output.trimmed +} + +test_expect_success 'setup' ' + write_script replace-editor.sh <<-\EOF && + mv "$1" "$(git rev-parse --git-path ORIGINAL-TODO)" + cp script-from-scratch "$1" + EOF + + test_commit A && + git checkout -b first && + test_commit B && + git checkout master && + test_commit C && + test_commit D && + git merge --no-commit B && + test_tick && + git commit -m E && + git tag -m E E && + git checkout -b second C && + test_commit F && + test_commit G && + git checkout master && + git merge --no-commit G && + test_tick && + git commit -m H && + git tag -m H H +' + +test_expect_success 'create completely different structure' ' + cat >script-from-scratch <<-\EOF && + label onto + + # onebranch + pick G + pick D + label onebranch + + # second + reset onto + pick B + label second + + reset onto + merge -C H second + merge onebranch # Merge the topic branch '\''onebranch'\'' + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r A && + test_cmp_graph <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + * | H + |\ \ + | |/ + |/| + | * B + |/ + * A + EOF +' + +test_expect_success 'generate correct todo list' ' + cat >expect <<-\EOF && + label onto + + reset onto + pick d9df450 B + label E + + reset onto + pick 5dee784 C + label branch-point + pick ca2c861 F + pick 088b00a G + label H + + reset branch-point # C + pick 12bd07b D + merge -C 2051b56 E # E + merge -C 233d48a H # H + + EOF + + grep -v "^#" <.git/ORIGINAL-TODO >output && + test_cmp expect output +' + +test_expect_success '`reset` refuses to overwrite untracked files' ' + git checkout -b refuse-to-reset && + test_commit dont-overwrite-untracked && + git checkout @{-1} && + : >dont-overwrite-untracked.t && + echo "reset refs/tags/dont-overwrite-untracked" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_must_fail git rebase -r HEAD && + git rebase --abort +' + +test_expect_success 'failed `merge` writes patch (may be rescheduled, too)' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b conflicting-merge A && + + : fail because of conflicting untracked file && + >G.t && + echo "merge -C H G" >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + test_must_fail git rebase -ir HEAD && + grep "^merge -C .* G$" .git/rebase-merge/done && + grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch && + + : fail because of merge conflict && + rm G.t .git/rebase-merge/patch && + git reset --hard && + test_commit conflicting-G G.t not-G conflicting-G && + test_must_fail git rebase --continue && + ! grep "^merge -C .* G$" .git/rebase-merge/git-rebase-todo && + test_path_is_file .git/rebase-merge/patch +' + +test_expect_success 'with a branch tip that was cherry-picked already' ' + git checkout -b already-upstream master && + base="$(git rev-parse --verify HEAD)" && + + test_commit A1 && + test_commit A2 && + git reset --hard $base && + test_commit B1 && + test_tick && + git merge -m "Merge branch A" A2 && + + git checkout -b upstream-with-a2 $base && + test_tick && + git cherry-pick A2 && + + git checkout already-upstream && + test_tick && + git rebase -i -r upstream-with-a2 && + test_cmp_graph upstream-with-a2.. <<-\EOF + * Merge branch A + |\ + | * A1 + * | B1 + |/ + o A2 + EOF +' + +test_expect_success 'do not rebase cousins unless asked for' ' + git checkout -b cousins master && + before="$(git rev-parse --verify HEAD)" && + test_tick && + git rebase -r HEAD^ && + test_cmp_rev HEAD $before && + test_tick && + git rebase --rebase-merges=rebase-cousins HEAD^ && + test_cmp_graph HEAD^.. <<-\EOF + * Merge the topic branch '\''onebranch'\'' + |\ + | * D + | * G + |/ + o H + EOF +' + +test_expect_success 'refs/rewritten/* is worktree-local' ' + git worktree add wt && + cat >wt/script-from-scratch <<-\EOF && + label xyz + exec GIT_DIR=../.git git rev-parse --verify refs/rewritten/xyz >a || : + exec git rev-parse --verify refs/rewritten/xyz >b + EOF + + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + git -C wt rebase -i HEAD && + test_must_be_empty wt/a && + test_cmp_rev HEAD "$(cat wt/b)" +' + +test_expect_success 'post-rewrite hook and fixups work for merges' ' + git checkout -b post-rewrite && + test_commit same1 && + git reset --hard HEAD^ && + test_commit same2 && + git merge -m "to fix up" same1 && + echo same old same old >same2.t && + test_tick && + git commit --fixup HEAD same2.t && + fixup="$(git rev-parse HEAD)" && + + mkdir -p .git/hooks && + test_when_finished "rm .git/hooks/post-rewrite" && + echo "cat >actual" | write_script .git/hooks/post-rewrite && + + test_tick && + git rebase -i --autosquash -r HEAD^^^ && + printf "%s %s\n%s %s\n%s %s\n%s %s\n" >expect $(git rev-parse \ + $fixup^^2 HEAD^2 \ + $fixup^^ HEAD^ \ + $fixup^ HEAD \ + $fixup HEAD) && + test_cmp expect actual +' + +test_expect_success 'refuse to merge ancestors of HEAD' ' + echo "merge HEAD^" >script-from-scratch && + test_config -C wt sequence.editor \""$PWD"/replace-editor.sh\" && + before="$(git rev-parse HEAD)" && + git rebase -i HEAD && + test_cmp_rev HEAD $before +' + +test_expect_success 'root commits' ' + git checkout --orphan unrelated && + (GIT_AUTHOR_NAME="Parsnip" GIT_AUTHOR_EMAIL="root@example.com" \ + test_commit second-root) && + test_commit third-root && + cat >script-from-scratch <<-\EOF && + pick third-root + label first-branch + reset [new root] + pick second-root + merge first-branch # Merge the 3rd root + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i --force --root -r && + test "Parsnip" = "$(git show -s --format=%an HEAD^)" && + test $(git rev-parse second-root^0) != $(git rev-parse HEAD^) && + test $(git rev-parse second-root:second-root.t) = \ + $(git rev-parse HEAD^:second-root.t) && + test_cmp_graph HEAD <<-\EOF && + * Merge the 3rd root + |\ + | * third-root + * second-root + EOF + + : fast forward if possible && + before="$(git rev-parse --verify HEAD)" && + test_might_fail git config --unset sequence.editor && + test_tick && + git rebase -i --root -r && + test_cmp_rev HEAD $before +' + +test_expect_success 'a "merge" into a root commit is a fast-forward' ' + head=$(git rev-parse HEAD) && + cat >script-from-scratch <<-EOF && + reset [new root] + merge $head + EOF + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r HEAD^ && + test_cmp_rev HEAD $head +' + +test_expect_success 'A root commit can be a cousin, treat it that way' ' + git checkout --orphan khnum && + test_commit yama && + git checkout -b asherah master && + test_commit shamkat && + git merge --allow-unrelated-histories khnum && + test_tick && + git rebase -f -r HEAD^ && + ! test_cmp_rev HEAD^2 khnum && + test_cmp_graph HEAD^.. <<-\EOF && + * Merge branch '\''khnum'\'' into asherah + |\ + | * yama + o shamkat + EOF + test_tick && + git rebase --rebase-merges=rebase-cousins HEAD^ && + test_cmp_graph HEAD^.. <<-\EOF + * Merge branch '\''khnum'\'' into asherah + |\ + | * yama + |/ + o shamkat + EOF +' + +test_expect_success 'labels that are object IDs are rewritten' ' + git checkout -b third B && + test_commit I && + third=$(git rev-parse HEAD) && + git checkout -b labels master && + git merge --no-commit third && + test_tick && + git commit -m "Merge commit '\''$third'\'' into labels" && + echo noop >script-from-scratch && + test_config sequence.editor \""$PWD"/replace-editor.sh\" && + test_tick && + git rebase -i -r A && + grep "^label $third-" .git/ORIGINAL-TODO && + ! grep "^label $third$" .git/ORIGINAL-TODO +' + +test_done diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index ccbc118..d1c68af 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -141,7 +141,7 @@ test_expect_success 'cherry-pick "-" works with arguments' ' test_cmp expect actual ' -test_expect_failure 'cherry-pick works with dirty renamed file' ' +test_expect_success 'cherry-pick works with dirty renamed file' ' test_commit to-rename && git checkout -b unrelated && test_commit unrelated && @@ -150,9 +150,8 @@ test_expect_failure 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - test_must_fail git cherry-pick refs/heads/unrelated >out && - test_i18ngrep "Refusing to lose dirty file at renamed" out && - test $(git rev-parse :0:renamed) = $(git rev-parse HEAD^:to-rename.t) && + git cherry-pick refs/heads/unrelated >out && + test $(git rev-parse :0:renamed) = $(git rev-parse HEAD~2:to-rename.t) && grep -q "^modified$" renamed ' diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index 9f93445..b42cd66 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -122,7 +122,7 @@ test_expect_success '--quit keeps HEAD and conflicted index intact' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -220,7 +220,7 @@ test_expect_success 'cherry-pick still writes sequencer state when one commit is { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && cat >expect <<-\EOF && OBJID @@ -247,9 +247,9 @@ test_expect_success '--abort after last commit in sequence' ' test_expect_success 'cherry-pick does not implicitly stomp an existing operation' ' pristine_detach initial && test_expect_code 1 git cherry-pick base..anotherpick && - test-tool chmtime -v +0 .git/sequencer >expect && + test-tool chmtime --get .git/sequencer >expect && test_expect_code 128 git cherry-pick unrelatedpick && - test-tool chmtime -v +0 .git/sequencer >actual && + test-tool chmtime --get .git/sequencer >actual && test_cmp expect actual ' @@ -317,7 +317,7 @@ test_expect_success '--continue after resolving conflicts' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual.log && test_cmp expect foo && test_cmp expect.log actual.log @@ -334,7 +334,7 @@ test_expect_success '--continue after resolving conflicts and committing' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && cat >expect <<-\EOF && OBJID diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index b170fb0..3e9139d 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -175,6 +175,49 @@ test_expect_success 'real edit works' ' diff_cmp expected output ' +test_expect_success 'setup file' ' + test_write_lines a "" b "" c >file && + git add file && + test_write_lines a "" d "" c >file +' + +test_expect_success 'setup patch' ' + SP=" " && + NULL="" && + cat >patch <<-EOF + @@ -1,4 +1,4 @@ + a + $NULL + -b + +f + $SP + c + EOF +' + +test_expect_success 'setup expected' ' + cat >expected <<-EOF + diff --git a/file b/file + index b5dd6c9..f910ae9 100644 + --- a/file + +++ b/file + @@ -1,5 +1,5 @@ + a + $SP + -f + +d + $SP + c + EOF +' + +test_expect_success 'edit can strip spaces from empty context lines' ' + test_write_lines e n q | git add -p 2>error && + test_must_be_empty error && + git diff >output && + diff_cmp expected output +' + test_expect_success 'skip files similarly as commit -a' ' git reset && echo file >.gitignore && diff --git a/t/t3702-add-edit.sh b/t/t3702-add-edit.sh index 3cb74ca..c6af7f8 100755 --- a/t/t3702-add-edit.sh +++ b/t/t3702-add-edit.sh @@ -40,7 +40,6 @@ test_expect_success 'setup' ' cat > expected-patch << EOF diff --git a/file b/file -index b9834b5..9020acb 100644 --- a/file +++ b/file @@ -1,11 +1,6 @@ @@ -80,7 +79,6 @@ EOF cat > expected << EOF diff --git a/file b/file -index b9834b5..ef6e94c 100644 --- a/file +++ b/file @@ -1,10 +1,12 @@ @@ -100,7 +98,7 @@ EOF echo "#!$SHELL_PATH" >fake-editor.sh cat >> fake-editor.sh <<\EOF -mv -f "$1" orig-patch && +egrep -v '^index' "$1" >orig-patch && mv -f patch "$1" EOF @@ -113,7 +111,8 @@ test_expect_success 'add -e' ' git add -e && test_cmp second-part file && test_cmp orig-patch expected-patch && - git diff --cached > out && + git diff --cached >actual && + grep -v index actual >out && test_cmp out expected ' diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index aefde7b..1f871d3 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -726,7 +726,7 @@ test_expect_success 'store updates stash ref and reflog' ' git reset --hard && ! grep quux bazzy && git stash store -m quuxery $STASH_ID && - test $(cat .git/refs/stash) = $STASH_ID && + test $(git rev-parse stash) = $STASH_ID && git reflog --format=%H stash| grep $STASH_ID && git stash pop && grep quux bazzy diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index 3ea5b9b..597b063 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -35,24 +35,26 @@ test_expect_success 'stash save --include-untracked cleaned the untracked files' test_cmp expect actual ' +tracked=$(git rev-parse --short $(echo 1 | git hash-object --stdin)) +untracked=$(git rev-parse --short $(echo untracked | git hash-object --stdin)) cat > expect.diff <<EOF diff --git a/HEAD b/HEAD new file mode 100644 -index 0000000..d00491f +index 0000000..$tracked --- /dev/null +++ b/HEAD @@ -0,0 +1 @@ +1 diff --git a/file2 b/file2 new file mode 100644 -index 0000000..d00491f +index 0000000..$tracked --- /dev/null +++ b/file2 @@ -0,0 +1 @@ +1 diff --git a/untracked/untracked b/untracked/untracked new file mode 100644 -index 0000000..5a72eb2 +index 0000000..$untracked --- /dev/null +++ b/untracked/untracked @@ -0,0 +1 @@ @@ -109,10 +111,11 @@ test_expect_success 'stash save -u dirty index' ' git stash -u ' +blob=$(git rev-parse --short $(echo 4 | git hash-object --stdin)) cat > expect <<EOF diff --git a/file3 b/file3 new file mode 100644 -index 0000000..b8626c4 +index 0000000..$blob --- /dev/null +++ b/file3 @@ -0,0 +1 @@ diff --git a/t/t4001-diff-rename.sh b/t/t4001-diff-rename.sh index a07816d..bf40303 100755 --- a/t/t4001-diff-rename.sh +++ b/t/t4001-diff-rename.sh @@ -138,6 +138,18 @@ test_expect_success 'favour same basenames over different ones' ' test_i18ngrep "renamed: .*path1 -> subdir/path1" out ' +test_expect_success 'test diff.renames=true for git status' ' + git -c diff.renames=true status >out && + test_i18ngrep "renamed: .*path1 -> subdir/path1" out +' + +test_expect_success 'test diff.renames=false for git status' ' + git -c diff.renames=false status >out && + test_i18ngrep ! "renamed: .*path1 -> subdir/path1" out && + test_i18ngrep "new file: .*subdir/path1" out && + test_i18ngrep "deleted: .*[^/]path1" out +' + test_expect_success 'favour same basenames even with minor differences' ' git show HEAD:path1 | sed "s/15/16/" > subdir/path1 && git status >out && diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index a5e8b83..3a6c21e 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -131,7 +131,7 @@ cmp_diff_files_output () { # object ID for the changed files because it wants you to look at the # filesystem. sed <"$2" >.test-tmp \ - -e '/^:000000 /d;s/'$_x40'\( [MCRNDU][0-9]*\) /'$_z40'\1 /' && + -e '/^:000000 /d;s/'$OID_REGEX'\( [MCRNDU][0-9]*\) /'$ZERO_OID'\1 /' && test_cmp "$1" .test-tmp } diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index 76f643b..a8e01ec 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -8,7 +8,7 @@ test_description='Test mode change diffs. ' . ./test-lib.sh -sed_script='s/\(:100644 100755\) \('"$_x40"'\) \2 /\1 X X /' +sed_script='s/\(:100644 100755\) \('"$OID_REGEX"'\) \2 /\1 X X /' test_expect_success 'setup' ' echo frotz >rezrov && diff --git a/t/t4007-rename-3.sh b/t/t4007-rename-3.sh index dae327f..b187b7f 100755 --- a/t/t4007-rename-3.sh +++ b/t/t4007-rename-3.sh @@ -17,6 +17,7 @@ test_expect_success 'prepare reference tree' ' echo $tree ' +blob=$(git hash-object "$TEST_DIRECTORY/diff-lib/COPYING") test_expect_success 'prepare work tree' ' cp path0/COPYING path1/COPYING && git update-index --add --remove path0/COPYING path1/COPYING @@ -26,8 +27,8 @@ test_expect_success 'prepare work tree' ' # path1 both have COPYING and the latter is a copy of path0/COPYING. # Comparing the full tree with cache should tell us so. -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 C100 path0/COPYING path1/COPYING +cat >expected <<EOF +:100644 100644 $blob $blob C100 path0/COPYING path1/COPYING EOF test_expect_success 'copy detection' ' @@ -46,8 +47,8 @@ test_expect_success 'copy detection, cached' ' # path1/COPYING suddenly appearing from nowhere, not detected as # a copy from path0/COPYING. -cat >expected <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6ff87c4664981e4397625791c8ea3bbb5f2279a3 A path1/COPYING +cat >expected <<EOF +:000000 100644 $ZERO_OID $blob A path1/COPYING EOF test_expect_success 'copy, limited to a subtree' ' @@ -64,8 +65,8 @@ test_expect_success 'tweak work tree' ' # path0/COPYING. Showing the full tree with cache should tell us about # the rename. -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 path0/COPYING path1/COPYING +cat >expected <<EOF +:100644 100644 $blob $blob R100 path0/COPYING path1/COPYING EOF test_expect_success 'rename detection' ' @@ -78,8 +79,8 @@ test_expect_success 'rename detection' ' # path0/COPYING. When we say we care only about path1, we should just # see path1/COPYING appearing from nowhere. -cat >expected <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6ff87c4664981e4397625791c8ea3bbb5f2279a3 A path1/COPYING +cat >expected <<EOF +:000000 100644 $ZERO_OID $blob A path1/COPYING EOF test_expect_success 'rename, limited to a subtree' ' diff --git a/t/t4008-diff-break-rewrite.sh b/t/t4008-diff-break-rewrite.sh index 9dd1bc5..b1ccd41 100755 --- a/t/t4008-diff-break-rewrite.sh +++ b/t/t4008-diff-break-rewrite.sh @@ -27,29 +27,32 @@ Further, with -B and -M together, these should turn into two renames. test_expect_success setup ' cat "$TEST_DIRECTORY"/diff-lib/README >file0 && cat "$TEST_DIRECTORY"/diff-lib/COPYING >file1 && + blob0_id=$(git hash-object file0) && + blob1_id=$(git hash-object file1) && git update-index --add file0 file1 && git tag reference $(git write-tree) ' test_expect_success 'change file1 with copy-edit of file0 and remove file0' ' sed -e "s/git/GIT/" file0 >file1 && + blob2_id=$(git hash-object file1) && rm -f file0 && git update-index --remove file0 file1 ' test_expect_success 'run diff with -B (#1)' ' git diff-index -B --cached reference >current && - cat >expect <<-\EOF && - :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 + cat >expect <<-EOF && + :100644 000000 $blob0_id $ZERO_OID D file0 + :100644 100644 $blob1_id $blob2_id M100 file1 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B and -M (#2)' ' git diff-index -B -M reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec R100 file0 file1 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob2_id R100 file0 file1 EOF compare_diff_raw expect current ' @@ -66,18 +69,18 @@ test_expect_success 'swap file0 and file1' ' test_expect_success 'run diff with -B (#3)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 6ff87c4664981e4397625791c8ea3bbb5f2279a3 M100 file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob1_id M100 file0 + :100644 100644 $blob1_id $blob0_id M100 file1 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B and -M (#4)' ' git diff-index -B -M reference >current && - cat >expect <<-\EOF && - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 6ff87c4664981e4397625791c8ea3bbb5f2279a3 R100 file1 file0 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 R100 file0 file1 + cat >expect <<-EOF && + :100644 100644 $blob1_id $blob1_id R100 file1 file0 + :100644 100644 $blob0_id $blob0_id R100 file0 file1 EOF compare_diff_raw expect current ' @@ -85,14 +88,15 @@ test_expect_success 'run diff with -B and -M (#4)' ' test_expect_success 'make file0 into something completely different' ' rm -f file0 && test_ln_s_add frotz file0 && + slink_id=$(printf frotz | git hash-object --stdin) && git update-index file1 ' test_expect_success 'run diff with -B (#5)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M100 file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob1_id $blob0_id M100 file1 EOF compare_diff_raw expect current ' @@ -103,9 +107,9 @@ test_expect_success 'run diff with -B -M (#6)' ' # file0 changed from regular to symlink. file1 is the same as the preimage # of file0. Because the change does not make file0 disappear, file1 is # denoted as a copy of file0 - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 548142c327a6790ff8821d67c2ee1eff7a656b52 C file0 file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob0_id $blob0_id C file0 file1 EOF compare_diff_raw expect current ' @@ -115,9 +119,9 @@ test_expect_success 'run diff with -M (#7)' ' # This should not mistake file0 as the copy source of new file1 # due to type differences. - cat >expect <<-\EOF && - :100644 120000 548142c327a6790ff8821d67c2ee1eff7a656b52 67be421f88824578857624f7b3dc75e99a8a1481 T file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 548142c327a6790ff8821d67c2ee1eff7a656b52 M file1 + cat >expect <<-EOF && + :100644 120000 $blob0_id $slink_id T file0 + :100644 100644 $blob1_id $blob0_id M file1 EOF compare_diff_raw expect current ' @@ -128,25 +132,26 @@ test_expect_success 'file1 edited to look like file0 and file0 rename-edited to git checkout-index -f -u -a && sed -e "s/git/GIT/" file0 >file1 && sed -e "s/git/GET/" file0 >file2 && + blob3_id=$(git hash-object file2) && rm -f file0 && git update-index --add --remove file0 file1 file2 ' test_expect_success 'run diff with -B (#8)' ' git diff-index -B reference >current && - cat >expect <<-\EOF && - :100644 000000 548142c327a6790ff8821d67c2ee1eff7a656b52 0000000000000000000000000000000000000000 D file0 - :100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec M100 file1 - :000000 100644 0000000000000000000000000000000000000000 69a939f651686f56322566e2fd76715947a24162 A file2 + cat >expect <<-EOF && + :100644 000000 $blob0_id $ZERO_OID D file0 + :100644 100644 $blob1_id $blob2_id M100 file1 + :000000 100644 $ZERO_OID $blob3_id A file2 EOF compare_diff_raw expect current ' test_expect_success 'run diff with -B -C (#9)' ' git diff-index -B -C reference >current && - cat >expect <<-\EOF && - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 2fbedd0b5d4b8126e4750c3bee305e8ff79f80ec C095 file0 file1 - :100644 100644 548142c327a6790ff8821d67c2ee1eff7a656b52 69a939f651686f56322566e2fd76715947a24162 R095 file0 file2 + cat >expect <<-EOF && + :100644 100644 $blob0_id $blob2_id C095 file0 file1 + :100644 100644 $blob0_id $blob3_id R095 file0 file2 EOF compare_diff_raw expect current ' diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index cf0f3a1..108c012 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -139,11 +139,13 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' cat >expect <<-\EOF && diff --git a/file.bin b/file.bin - index e69de29..d95f3ad 100644 - Binary files a/file.bin and b/file.bin differ + new file mode 100644 + index 0000000..d95f3ad + Binary files /dev/null and b/file.bin differ diff --git a/link.bin b/link.bin - index e69de29..dce41ec 120000 - --- a/link.bin + new file mode 120000 + index 0000000..dce41ec + --- /dev/null +++ b/link.bin @@ -0,0 +1 @@ +file.bin diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 482112c..028d550 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -578,7 +578,11 @@ test_expect_success 'excessive subject' ' rm -rf patches/ && git checkout side && + before=$(git hash-object file) && + before=$(git rev-parse --short $before) && for i in 5 6 1 2 3 A 4 B C 7 8 9 10 D E F; do echo "$i"; done >>file && + after=$(git hash-object file) && + after=$(git rev-parse --short $after) && git update-index file && git commit -m "This is an excessively long subject line for a message due to the habit some projects have of not having a short, one-line subject at the start of the commit message, but rather sticking a whole paragraph right at the start as the only thing in the commit message. It had better not become the filename for the patch." && git format-patch -o patches/ master..side && @@ -586,7 +590,6 @@ test_expect_success 'excessive subject' ' ' test_expect_success 'cover-letter inherits diff options' ' - git mv file foo && git commit -m foo && git format-patch --no-renames --cover-letter -1 && @@ -616,7 +619,7 @@ test_expect_success 'shortlog of cover-letter wraps overly-long onelines' ' ' cat > expect << EOF -index 40f36c6..2dc5c23 100644 +index $before..$after 100644 --- a/file +++ b/file @@ -13,4 +13,20 @@ C @@ -640,7 +643,7 @@ test_expect_success 'format-patch respects -U' ' cat > expect << EOF diff --git a/file b/file -index 40f36c6..2dc5c23 100644 +index $before..$after 100644 --- a/file +++ b/file @@ -14,3 +14,19 @@ C @@ -1523,14 +1526,14 @@ test_expect_success 'cover letter auto user override' ' test_expect_success 'format-patch --zero-commit' ' git format-patch --zero-commit --stdout v2..v1 >patch2 && grep "^From " patch2 | sort | uniq >actual && - echo "From $_z40 Mon Sep 17 00:00:00 2001" >expect && + echo "From $ZERO_OID Mon Sep 17 00:00:00 2001" >expect && test_cmp expect actual ' test_expect_success 'From line has expected format' ' git format-patch --stdout v2..v1 >patch2 && grep "^From " patch2 >from && - grep "^From $_x40 Mon Sep 17 00:00:00 2001$" patch2 >filtered && + grep "^From $OID_REGEX Mon Sep 17 00:00:00 2001$" patch2 >filtered && test_cmp from filtered ' @@ -1661,6 +1664,15 @@ test_expect_success 'format-patch --base with --attach' ' test_write_lines 1 2 >expect && test_cmp expect actual ' +test_expect_success 'format-patch --attach cover-letter only is non-multipart' ' + test_when_finished "rm -fr patches" && + git format-patch -o patches --cover-letter --attach=mimemime --base=HEAD~ -1 && + ! egrep "^--+mimemime" patches/0000*.patch && + egrep "^--+mimemime$" patches/0001*.patch >output && + test_line_count = 2 output && + egrep "^--+mimemime--$" patches/0001*.patch >output && + test_line_count = 1 output +' test_expect_success 'format-patch --pretty=mboxrd' ' sp=" " && diff --git a/t/t4020-diff-external.sh b/t/t4020-diff-external.sh index 0446201..e009826 100755 --- a/t/t4020-diff-external.sh +++ b/t/t4020-diff-external.sh @@ -13,6 +13,8 @@ test_expect_success setup ' test_tick && echo second >file && + before=$(git hash-object file) && + before=$(git rev-parse --short $before) && git add file && git commit -m second && @@ -26,7 +28,7 @@ test_expect_success 'GIT_EXTERNAL_DIFF environment' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -55,7 +57,7 @@ test_expect_success SYMLINKS 'typechange diff' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z120000 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -73,7 +75,7 @@ test_expect_success 'diff.external' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -104,7 +106,7 @@ test_expect_success 'diff attribute' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -137,7 +139,7 @@ test_expect_success 'diff attribute' ' read path oldfile oldhex oldmode newfile newhex newmode && test "z$path" = zfile && test "z$oldmode" = z100644 && - test "z$newhex" = "z$_z40" && + test "z$newhex" = "z$ZERO_OID" && test "z$newmode" = z100644 && oh=$(git rev-parse --verify HEAD:file) && test "z$oh" = "z$oldhex" @@ -180,9 +182,13 @@ test_expect_success 'no diff with -diff' ' echo NULZbetweenZwords | perl -pe 'y/Z/\000/' > file test_expect_success 'force diff with "diff"' ' + after=$(git hash-object file) && + after=$(git rev-parse --short $after) && echo >.gitattributes "file diff" && git diff >actual && - test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual + sed -e "s/^index .*/index $before..$after 100644/" \ + "$TEST_DIRECTORY"/t4020/diff.NUL >expected-diff && + test_cmp expected-diff actual ' test_expect_success 'GIT_EXTERNAL_DIFF with more than one changed files' ' @@ -237,7 +243,7 @@ test_expect_success 'diff --cached' ' git update-index --assume-unchanged file && echo second >file && git diff --cached >actual && - test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual + test_cmp expected-diff actual ' test_expect_success 'clean up crlf leftovers' ' diff --git a/t/t4022-diff-rewrite.sh b/t/t4022-diff-rewrite.sh index cb51d9f..6d1c3d9 100755 --- a/t/t4022-diff-rewrite.sh +++ b/t/t4022-diff-rewrite.sh @@ -13,6 +13,8 @@ test_expect_success setup ' "nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM" \ <"$TEST_DIRECTORY"/../COPYING >test && echo "to be deleted" >test2 && + blob=$(git hash-object test2) && + blob=$(git rev-parse --short $blob) && git add test2 ' @@ -27,7 +29,7 @@ test_expect_success 'detect rewrite' ' cat >expect <<EOF diff --git a/test2 b/test2 deleted file mode 100644 -index 4202011..0000000 +index $blob..0000000 --- a/test2 +++ /dev/null @@ -1 +0,0 @@ @@ -43,7 +45,7 @@ test_expect_success 'show deletion diff without -D' ' cat >expect <<EOF diff --git a/test2 b/test2 deleted file mode 100644 -index 4202011..0000000 +index $blob..0000000 EOF test_expect_success 'suppress deletion diff with -D' ' diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 2ffd11a..6304130 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -31,7 +31,7 @@ test_expect_success setup ' cd sub && git rev-list HEAD ) && - echo ":160000 160000 $3 $_z40 M sub" >expect && + echo ":160000 160000 $3 $ZERO_OID M sub" >expect && subtip=$3 subprev=$2 ' @@ -250,7 +250,7 @@ test_expect_success 'conflicted submodule setup' ' # 39 efs c=fffffffffffffffffffffffffffffffffffffff && ( - echo "000000 $_z40 0 sub" && + echo "000000 $ZERO_OID 0 sub" && echo "160000 1$c 1 sub" && echo "160000 2$c 2 sub" && echo "160000 3$c 3 sub" @@ -265,7 +265,7 @@ index 2ffffff,3ffffff..0000000 ++Subproject commit 0000000000000000000000000000000000000000'\'' && hh=$(git rev-parse HEAD) && - sed -e "s/$_z40/$hh/" expect.nosub >expect.withsub + sed -e "s/$ZERO_OID/$hh/" expect.nosub >expect.withsub ' diff --git a/t/t4029-diff-trailing-space.sh b/t/t4029-diff-trailing-space.sh index 3ccc237..32b6e9a 100755 --- a/t/t4029-diff-trailing-space.sh +++ b/t/t4029-diff-trailing-space.sh @@ -6,7 +6,7 @@ test_description='diff honors config option, diff.suppressBlankEmpty' . ./test-lib.sh -cat <<\EOF > exp || +cat <<\EOF >expected || diff --git a/f b/f index 5f6a263..8cb8bae 100644 --- a/f @@ -18,22 +18,26 @@ index 5f6a263..8cb8bae 100644 EOF exit 1 -test_expect_success \ - "$test_description" \ - 'printf "\nx\n" > f && - git add f && - git commit -q -m. f && - printf "\ny\n" > f && - git config --bool diff.suppressBlankEmpty true && - git diff f > actual && - test_cmp exp actual && - perl -i.bak -p -e "s/^\$/ /" exp && - git config --bool diff.suppressBlankEmpty false && - git diff f > actual && - test_cmp exp actual && - git config --bool --unset diff.suppressBlankEmpty && - git diff f > actual && - test_cmp exp actual - ' +test_expect_success "$test_description" ' + printf "\nx\n" > f && + before=$(git hash-object f) && + before=$(git rev-parse --short $before) && + git add f && + git commit -q -m. f && + printf "\ny\n" > f && + after=$(git hash-object f) && + after=$(git rev-parse --short $after) && + sed -e "s/^index .*/index $before..$after 100644/" expected >exp && + git config --bool diff.suppressBlankEmpty true && + git diff f > actual && + test_cmp exp actual && + perl -i.bak -p -e "s/^\$/ /" exp && + git config --bool diff.suppressBlankEmpty false && + git diff f > actual && + test_cmp exp actual && + git config --bool --unset diff.suppressBlankEmpty && + git diff f > actual && + test_cmp exp actual +' test_done diff --git a/t/t4030-diff-textconv.sh b/t/t4030-diff-textconv.sh index aad6c7f..4cb9f0e 100755 --- a/t/t4030-diff-textconv.sh +++ b/t/t4030-diff-textconv.sh @@ -148,7 +148,8 @@ test_expect_success 'diffstat does not run textconv' ' # restore working setup echo file diff=foo >.gitattributes -cat >expect.typechange <<'EOF' +symlink=$(git rev-parse --short $(printf frotz | git hash-object --stdin)) +cat >expect.typechange <<EOF --- a/file +++ /dev/null @@ -1,2 +0,0 @@ @@ -156,7 +157,7 @@ cat >expect.typechange <<'EOF' -1 diff --git a/file b/file new file mode 120000 -index 0000000..67be421 +index 0000000..$symlink --- /dev/null +++ b/file @@ -0,0 +1 @@ diff --git a/t/t4042-diff-textconv-caching.sh b/t/t4042-diff-textconv-caching.sh index 04a44d5..bf33aed 100755 --- a/t/t4042-diff-textconv-caching.sh +++ b/t/t4042-diff-textconv-caching.sh @@ -15,9 +15,13 @@ test_expect_success 'setup' ' echo bar content 1 >bar.bin && git add . && git commit -m one && + foo1=$(git rev-parse --short HEAD:foo.bin) && + bar1=$(git rev-parse --short HEAD:bar.bin) && echo foo content 2 >foo.bin && echo bar content 2 >bar.bin && git commit -a -m two && + foo2=$(git rev-parse --short HEAD:foo.bin) && + bar2=$(git rev-parse --short HEAD:bar.bin) && echo "*.bin diff=magic" >.gitattributes && git config diff.magic.textconv ./helper && git config diff.magic.cachetextconv true @@ -25,14 +29,14 @@ test_expect_success 'setup' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1 +1 @@ -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1 +1 @@ @@ -59,7 +63,7 @@ test_expect_success 'cached textconv does not run helper' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1,2 +1,2 @@ @@ -67,7 +71,7 @@ index fcf9166..28283d5 100644 -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1,2 +1,2 @@ @@ -84,7 +88,7 @@ test_expect_success 'changing textconv invalidates cache' ' cat >expect <<EOF diff --git a/bar.bin b/bar.bin -index fcf9166..28283d5 100644 +index $bar1..$bar2 100644 --- a/bar.bin +++ b/bar.bin @@ -1,2 +1,2 @@ @@ -92,7 +96,7 @@ index fcf9166..28283d5 100644 -converted: bar content 1 +converted: bar content 2 diff --git a/foo.bin b/foo.bin -index d5b9fe3..1345db2 100644 +index $foo1..$foo2 100644 --- a/foo.bin +++ b/foo.bin @@ -1 +1 @@ diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh index d5ce72b..647905e 100755 --- a/t/t4044-diff-index-unique-abbrev.sh +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -3,6 +3,12 @@ test_description='test unique sha1 abbreviation on "index from..to" line' . ./test-lib.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + cat >expect_initial <<EOF 100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo EOF diff --git a/t/t4045-diff-relative.sh b/t/t4045-diff-relative.sh index 6471a68..36f8ed8 100755 --- a/t/t4045-diff-relative.sh +++ b/t/t4045-diff-relative.sh @@ -8,6 +8,7 @@ test_expect_success 'setup' ' echo content >file1 && mkdir subdir && echo other content >subdir/file2 && + blob=$(git hash-object subdir/file2) && git add . && git commit -m one ' @@ -17,10 +18,11 @@ check_diff () { shift expect=$1 shift + short_blob=$(git rev-parse --short $blob) cat >expected <<-EOF diff --git a/$expect b/$expect new file mode 100644 - index 0000000..25c05ef + index 0000000..$short_blob --- /dev/null +++ b/$expect @@ -0,0 +1 @@ @@ -68,7 +70,7 @@ check_raw () { expect=$1 shift cat >expected <<-EOF - :000000 100644 0000000000000000000000000000000000000000 25c05ef3639d2d270e7fe765a67668f098092bc5 A $expect + :000000 100644 0000000000000000000000000000000000000000 $blob A $expect EOF test_expect_success "--raw $*" " git -C '$dir' diff --no-abbrev --raw $* HEAD^ >actual && diff --git a/t/t4046-diff-unmerged.sh b/t/t4046-diff-unmerged.sh index d0f1447..ff7cfd8 100755 --- a/t/t4046-diff-unmerged.sh +++ b/t/t4046-diff-unmerged.sh @@ -37,7 +37,7 @@ test_expect_success 'diff-files -0' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" done >diff-files-0.expect && git diff-files -0 >diff-files-0.actual && test_cmp diff-files-0.expect diff-files-0.actual @@ -47,9 +47,9 @@ test_expect_success 'diff-files -1' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - x??) echo ":100644 100644 $blob1 $_z40 M $path" + x??) echo ":100644 100644 $blob1 $ZERO_OID M $path" esac done >diff-files-1.expect && git diff-files -1 >diff-files-1.actual && @@ -60,9 +60,9 @@ test_expect_success 'diff-files -2' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - ?x?) echo ":100644 100644 $blob2 $_z40 M $path" + ?x?) echo ":100644 100644 $blob2 $ZERO_OID M $path" esac done >diff-files-2.expect && git diff-files -2 >diff-files-2.actual && @@ -75,9 +75,9 @@ test_expect_success 'diff-files -3' ' for path in $paths do >"$path" && - echo ":000000 100644 $_z40 $_z40 U $path" && + echo ":000000 100644 $ZERO_OID $ZERO_OID U $path" && case "$path" in - ??x) echo ":100644 100644 $blob3 $_z40 M $path" + ??x) echo ":100644 100644 $blob3 $ZERO_OID M $path" esac done >diff-files-3.expect && git diff-files -3 >diff-files-3.actual && diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index 18f42c5..fcae82f 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -19,37 +19,37 @@ test_expect_success 'create tree with matching file' ' ' test_expect_success 'raw diff shows null sha1 (addition)' ' - echo ":000000 100644 $_z40 $_z40 A foo" >expect && + echo ":000000 100644 $ZERO_OID $ZERO_OID A foo" >expect && git diff-tree $EMPTY_TREE $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (removal)' ' - echo ":100644 000000 $_z40 $_z40 D foo" >expect && + echo ":100644 000000 $ZERO_OID $ZERO_OID D foo" >expect && git diff-tree $bogus_tree $EMPTY_TREE >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (modification)' ' - echo ":100644 100644 $blob $_z40 M foo" >expect && + echo ":100644 100644 $blob $ZERO_OID M foo" >expect && git diff-tree $good_tree $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (other direction)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-tree $bogus_tree $good_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (reverse)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-tree -R $good_tree $bogus_tree >actual && test_cmp expect actual ' test_expect_success 'raw diff shows null sha1 (index)' ' - echo ":100644 100644 $_z40 $blob M foo" >expect && + echo ":100644 100644 $ZERO_OID $blob M foo" >expect && git diff-index $bogus_tree >actual && test_cmp expect actual ' diff --git a/t/t4058-diff-duplicates.sh b/t/t4058-diff-duplicates.sh index 0a23242..c24ee17 100755 --- a/t/t4058-diff-duplicates.sh +++ b/t/t4058-diff-duplicates.sh @@ -59,12 +59,12 @@ test_expect_success 'create trees with duplicate entries' ' test_expect_success 'diff-tree between trees' ' { - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":000000 100644 $_z40 $blob_two A\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" && - printf ":100644 000000 $blob_two $_z40 D\touter/inner\n" + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":000000 100644 $ZERO_OID $blob_two A\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" && + printf ":100644 000000 $blob_two $ZERO_OID D\touter/inner\n" } >expect && git diff-tree -r --no-abbrev one two >actual && test_cmp expect actual diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 1eccfb7..1ebc587 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -140,8 +140,8 @@ test_expect_success setup ' echo "# User $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" && echo "# Date $test_tick 25200" && echo "# $(git show --pretty="%aD" -s second)" && - echo "# Node ID $_z40" && - echo "# Parent $_z40" && + echo "# Node ID $ZERO_OID" && + echo "# Parent $ZERO_OID" && cat msg && echo && git diff-tree --no-commit-id -p second diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index deafaa3..8417e5a 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -166,7 +166,7 @@ test_expect_success 'first postimage wins' ' git commit -q -a -m "prefer first over second" && test -f $rr/postimage && - oldmtimepost=$(test-tool chmtime -v -60 $rr/postimage | cut -f 1) && + oldmtimepost=$(test-tool chmtime --get -60 $rr/postimage) && git checkout -b third master && git show second^:a1 | sed "s/To die: t/To die! T/" >a1 && @@ -179,7 +179,7 @@ test_expect_success 'first postimage wins' ' ' test_expect_success 'rerere updates postimage timestamp' ' - newmtimepost=$(test-tool chmtime -v +0 $rr/postimage | cut -f 1) && + newmtimepost=$(test-tool chmtime --get $rr/postimage) && test $oldmtimepost -lt $newmtimepost ' @@ -243,7 +243,7 @@ rerere_gc_custom_expiry_test () { five_days="$1" right_now="$2" test_expect_success "rerere gc with custom expiry ($five_days, $right_now)" ' rm -fr .git/rr-cache && - rr=.git/rr-cache/$_z40 && + rr=.git/rr-cache/$ZERO_OID && mkdir -p "$rr" && >"$rr/preimage" && >"$rr/postimage" && @@ -512,7 +512,7 @@ test_expect_success 'multiple identical conflicts' ' count_pre_post 2 0 && # Pretend that the conflicts were made quite some time ago - find .git/rr-cache/ -type f | xargs test-tool chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Unresolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && @@ -568,7 +568,7 @@ test_expect_success 'multiple identical conflicts' ' git rerere && # Pretend that the resolutions are old again - find .git/rr-cache/ -type f | xargs test-tool chmtime -172800 && + test-tool chmtime -172800 $(find .git/rr-cache/ -type f) && # Resolved entries have not expired yet git -c gc.rerereresolved=5 -c gc.rerereunresolved=5 rerere gc && diff --git a/t/t4201-shortlog.sh b/t/t4201-shortlog.sh index ff6649e..58c2773 100755 --- a/t/t4201-shortlog.sh +++ b/t/t4201-shortlog.sh @@ -59,7 +59,7 @@ test_expect_success 'setup' ' fuzz() { file=$1 && sed " - s/$_x40/OBJECT_NAME/g + s/$OID_REGEX/OBJECT_NAME/g s/$_x35/OBJID/g s/^ \{6\}[CTa].*/ SUBJECT/g s/^ \{8\}[^ ].*/ CONTINUATION/g diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 591f35d..2052cad 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -516,22 +516,22 @@ test_expect_success 'log decoration properly follows tag chain' ' git commit --amend -m shorter && git log --no-walk --tags --pretty="%H %d" --decorate=full >actual && cat <<-EOF >expected && - $head1 (tag: refs/tags/tag2) $head2 (tag: refs/tags/message-one) $old_head1 (tag: refs/tags/message-two) + $head1 (tag: refs/tags/tag2) EOF - sort actual >actual1 && + sort -k3 actual >actual1 && test_cmp expected actual1 ' test_expect_success 'clean log decoration' ' git log --no-walk --tags --pretty="%H %D" --decorate=full >actual && cat >expected <<-EOF && - $head1 tag: refs/tags/tag2 $head2 tag: refs/tags/message-one $old_head1 tag: refs/tags/message-two + $head1 tag: refs/tags/tag2 EOF - sort actual >actual1 && + sort -k3 actual >actual1 && test_cmp expected actual1 ' diff --git a/t/t4208-log-magic-pathspec.sh b/t/t4208-log-magic-pathspec.sh index a1705f7..62f335b 100755 --- a/t/t4208-log-magic-pathspec.sh +++ b/t/t4208-log-magic-pathspec.sh @@ -45,8 +45,9 @@ test_expect_success 'git log -- :' ' ' test_expect_success 'git log HEAD -- :/' ' + initial=$(git rev-parse --short HEAD^) && cat >expected <<-EOF && - 24b24cf initial + $initial initial EOF (cd sub && git log --oneline HEAD -- :/ >../actual) && test_cmp expected actual diff --git a/t/t4254-am-corrupt.sh b/t/t4254-am-corrupt.sh index 168739c..fd3bdbf 100755 --- a/t/t4254-am-corrupt.sh +++ b/t/t4254-am-corrupt.sh @@ -25,7 +25,7 @@ test_expect_success setup ' # fatal: unable to write file '(null)' mode 100644: Bad address # Also, it had the unwanted side-effect of deleting f. test_expect_success 'try to apply corrupted patch' ' - test_must_fail git am bad-patch.diff 2>actual + test_must_fail git -c advice.amWorkDir=false am bad-patch.diff 2>actual ' test_expect_success 'compare diagnostic; ensure file is still here' ' diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index af4d9b8..2a97b27 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -192,7 +192,7 @@ test_expect_success \ 'validate file modification time' \ 'mkdir extract && "$TAR" xf b.tar -C extract a/a && - test-tool chmtime -v +0 extract/a/a |cut -f 1 >b.mtime && + test-tool chmtime --get extract/a/a >b.mtime && echo "1117231200" >expected.mtime && test_cmp expected.mtime b.mtime' diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index 08c210f..fca001e 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -81,7 +81,7 @@ test_expect_success 'setup: two scripts for reading pull requests' ' cat <<-EOT >fuzz.sed #!/bin/sed -nf s/$downstream_url_for_sed/URL/g - s/$_x40/OBJECT_NAME/g + s/$OID_REGEX/OBJECT_NAME/g s/A U Thor/AUTHOR/g s/[-0-9]\{10\} [:0-9]\{8\} [-+][0-9]\{4\}/DATE/g s/ [^ ].*/ SUBJECT/g diff --git a/t/t5300-pack-object.sh b/t/t5300-pack-object.sh index 65ff60f..2336d09 100755 --- a/t/t5300-pack-object.sh +++ b/t/t5300-pack-object.sh @@ -421,6 +421,12 @@ test_expect_success 'index-pack <pack> works in non-repo' ' test_path_is_file foo.idx ' +test_expect_success 'index-pack --strict <pack> works in non-repo' ' + rm -f foo.idx && + nongit git index-pack --strict ../foo.pack && + test_path_is_file foo.idx +' + test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'index-pack --threads=N or pack.threads=N warns when no pthreads' ' test_must_fail git index-pack --threads=2 2>err && grep ^warning: err >warnings && @@ -457,6 +463,11 @@ test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'pack-objects --threads=N or pack. grep -F "no threads support, ignoring pack.threads" err ' +test_expect_success 'pack-objects in too-many-packs mode' ' + GIT_TEST_FULL_IN_PACK_ARRAY=1 git repack -ad && + git fsck +' + # # WARNING! # @@ -466,9 +477,11 @@ test_expect_success !PTHREADS,C_LOCALE_OUTPUT 'pack-objects --threads=N or pack. test_expect_success \ 'fake a SHA1 hash collision' \ - 'test -f .git/objects/c8/2de19312b6c3695c0c18f70709a6c535682a67 && - cp -f .git/objects/9d/235ed07cd19811a6ceb342de82f190e49c9f68 \ - .git/objects/c8/2de19312b6c3695c0c18f70709a6c535682a67' + 'long_a=$(git hash-object a | sed -e "s!^..!&/!") && + long_b=$(git hash-object b | sed -e "s!^..!&/!") && + test -f .git/objects/$long_b && + cp -f .git/objects/$long_a \ + .git/objects/$long_b' test_expect_success \ 'make sure index-pack detects the SHA1 collision' \ diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index f0f6e2a..f20f03c 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -320,4 +320,14 @@ test_expect_success 'prune: handle HEAD reflog in multiple worktrees' ' test_cmp expected actual ' +test_expect_success 'prune: handle expire option correctly' ' + test_must_fail git prune --expire 2>error && + test_i18ngrep "requires a value" error && + + test_must_fail git prune --expire=nyah 2>error && + test_i18ngrep "malformed expiration" error && + + git prune --no-expire +' + test_done diff --git a/t/t5308-pack-detect-duplicates.sh b/t/t5308-pack-detect-duplicates.sh index 156ae9e..6845c1f 100755 --- a/t/t5308-pack-detect-duplicates.sh +++ b/t/t5308-pack-detect-duplicates.sh @@ -4,6 +4,12 @@ test_description='handling of duplicate objects in incoming packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + # The sha1s we have in our pack. It's important that these have the same # starting byte, so that they end up in the same fanout section of the index. # That lets us make sure we are exercising the binary search with both sets. diff --git a/t/t5309-pack-delta-cycles.sh b/t/t5309-pack-delta-cycles.sh index 3e7861b..491556da 100755 --- a/t/t5309-pack-delta-cycles.sh +++ b/t/t5309-pack-delta-cycles.sh @@ -4,6 +4,12 @@ test_description='test index-pack handling of delta cycles in packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh +if ! test_have_prereq SHA1 +then + skip_all='not using SHA-1 for objects' + test_done +fi + # Two similar-ish objects that we have computed deltas between. A=01d7713666f4de822776c7622c10f1b07de280dc B=e68fe8129b546b101aee9510c5328e7f21ca1d18 diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index f6d600f..2d22a17 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -264,9 +264,9 @@ test_expect_success 'pack with missing parent' ' ' test_expect_success JGIT 'we can read jgit bitmaps' ' - git clone . compat-jgit && + git clone --bare . compat-jgit.git && ( - cd compat-jgit && + cd compat-jgit.git && rm -f .git/objects/pack/*.bitmap && jgit gc && git rev-list --test-bitmap HEAD @@ -274,9 +274,9 @@ test_expect_success JGIT 'we can read jgit bitmaps' ' ' test_expect_success JGIT 'jgit can read our bitmaps' ' - git clone . compat-us && + git clone --bare . compat-us.git && ( - cd compat-us && + cd compat-us.git && git repack -adb && # jgit gc will barf if it does not like our bitmaps jgit gc @@ -331,4 +331,17 @@ test_expect_success 'pack reuse respects --incremental' ' git show-index <empty.idx >actual && test_cmp expect actual ' + +test_expect_success 'truncated bitmap fails gracefully' ' + git repack -ad && + git rev-list --use-bitmap-index --count --all >expect && + bitmap=$(ls .git/objects/pack/*.bitmap) && + test_when_finished "rm -f $bitmap" && + head -c 512 <$bitmap >$bitmap.tmp && + mv -f $bitmap.tmp $bitmap && + git rev-list --use-bitmap-index --count --all >actual 2>stderr && + test_cmp expect actual && + test_i18ngrep corrupt stderr +' + test_done diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh new file mode 100755 index 0000000..77d85ae --- /dev/null +++ b/t/t5318-commit-graph.sh @@ -0,0 +1,233 @@ +#!/bin/sh + +test_description='commit graph' +. ./test-lib.sh + +test_expect_success 'setup full repo' ' + mkdir full && + cd "$TRASH_DIRECTORY/full" && + git init && + git config core.commitGraph true && + objdir=".git/objects" +' + +test_expect_success 'write graph with no packs' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write --object-dir . && + test_path_is_file info/commit-graph +' + +test_expect_success 'create commits and repack' ' + cd "$TRASH_DIRECTORY/full" && + for i in $(test_seq 3) + do + test_commit $i && + git branch commits/$i + done && + git repack +' + +graph_git_two_modes() { + git -c core.graph=true $1 >output + git -c core.graph=false $1 >expect + test_cmp output expect +} + +graph_git_behavior() { + MSG=$1 + DIR=$2 + BRANCH=$3 + COMPARE=$4 + test_expect_success "check normal git operations: $MSG" ' + cd "$TRASH_DIRECTORY/$DIR" && + graph_git_two_modes "log --oneline $BRANCH" && + graph_git_two_modes "log --topo-order $BRANCH" && + graph_git_two_modes "log --graph $COMPARE..$BRANCH" && + graph_git_two_modes "branch -vv" && + graph_git_two_modes "merge-base -a $BRANCH $COMPARE" + ' +} + +graph_git_behavior 'no graph' full commits/3 commits/1 + +graph_read_expect() { + OPTIONAL="" + NUM_CHUNKS=3 + if test ! -z $2 + then + OPTIONAL=" $2" + NUM_CHUNKS=$((3 + $(echo "$2" | wc -w))) + fi + cat >expect <<- EOF + header: 43475048 1 1 $NUM_CHUNKS 0 + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata$OPTIONAL + EOF + git commit-graph read >output && + test_cmp expect output +} + +test_expect_success 'write graph' ' + cd "$TRASH_DIRECTORY/full" && + graph1=$(git commit-graph write) && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "3" +' + +graph_git_behavior 'graph exists' full commits/3 commits/1 + +test_expect_success 'Add more commits' ' + cd "$TRASH_DIRECTORY/full" && + git reset --hard commits/1 && + for i in $(test_seq 4 5) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + for i in $(test_seq 6 7) + do + test_commit $i && + git branch commits/$i + done && + git reset --hard commits/2 && + git merge commits/4 && + git branch merge/1 && + git reset --hard commits/4 && + git merge commits/6 && + git branch merge/2 && + git reset --hard commits/3 && + git merge commits/5 commits/7 && + git branch merge/3 && + git repack +' + +# Current graph structure: +# +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +test_expect_success 'write graph with merges' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2 +graph_git_behavior 'merge 1 vs 3' full merge/1 merge/3 +graph_git_behavior 'merge 2 vs 3' full merge/2 merge/3 + +test_expect_success 'Add one more commit' ' + cd "$TRASH_DIRECTORY/full" && + test_commit 8 && + git branch commits/8 && + ls $objdir/pack | grep idx >existing-idx && + git repack && + ls $objdir/pack| grep idx | grep -v --file=existing-idx >new-idx +' + +# Current graph structure: +# +# 8 +# | +# __M3___ +# / | \ +# 3 M1 5 M2 7 +# |/ \|/ \| +# 2 4 6 +# |___/____/ +# 1 + +graph_git_behavior 'mixed mode, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'mixed mode, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with new commit' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'full graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'write graph with nothing new' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'cleared graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from latest pack with closure' ' + cd "$TRASH_DIRECTORY/full" && + cat new-idx | git commit-graph write --stdin-packs && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "9" "large_edges" +' + +graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from pack, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with closure' ' + cd "$TRASH_DIRECTORY/full" && + git tag -a -m "merge" tag/merge merge/2 && + git rev-parse tag/merge >commits-in && + git rev-parse merge/1 >>commits-in && + cat commits-in | git commit-graph write --stdin-commits && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "6" +' + +graph_git_behavior 'graph from commits, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'graph from commits, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'build graph from commits with append' ' + cd "$TRASH_DIRECTORY/full" && + git rev-parse merge/3 | git commit-graph write --stdin-commits --append && + test_path_is_file $objdir/info/commit-graph && + graph_read_expect "10" "large_edges" +' + +graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 +graph_git_behavior 'append graph, commit 8 vs merge 2' full commits/8 merge/2 + +test_expect_success 'setup bare repo' ' + cd "$TRASH_DIRECTORY" && + git clone --bare --no-local full bare && + cd bare && + git config core.commitGraph true && + baredir="./objects" +' + +graph_git_behavior 'bare repo, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo, commit 8 vs merge 2' bare commits/8 merge/2 + +test_expect_success 'write graph in bare repo' ' + cd "$TRASH_DIRECTORY/bare" && + git commit-graph write && + test_path_is_file $baredir/info/commit-graph && + graph_read_expect "11" "large_edges" +' + +graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1 +graph_git_behavior 'bare repo with graph, commit 8 vs merge 2' bare commits/8 merge/2 + +test_expect_success 'perform fast-forward merge in full repo' ' + cd "$TRASH_DIRECTORY/full" && + git checkout -b merge-5-to-8 commits/5 && + git merge commits/8 && + git show-ref -s merge-5-to-8 >output && + git show-ref -s commits/8 >expect && + test_cmp expect output +' + +test_done diff --git a/t/t5404-tracking-branches.sh b/t/t5404-tracking-branches.sh index 2b8c0ba..2762f42 100755 --- a/t/t5404-tracking-branches.sh +++ b/t/t5404-tracking-branches.sh @@ -56,7 +56,7 @@ test_expect_success 'deleted branches have their tracking branches removed' ' test_expect_success 'already deleted tracking branches ignored' ' git branch -d -r origin/b3 && git push origin :b3 >output 2>&1 && - ! grep error output + ! grep "^error: " output ' test_done diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 0680dec..ea6570e 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -30,7 +30,7 @@ add () { test_tick && commit=$(echo "$text" | git commit-tree $tree $parents) && eval "$name=$commit; export $name" && - echo $commit > .git/refs/heads/$branch && + git update-ref "refs/heads/$branch" "$commit" && eval ${branch}TIP=$commit } @@ -45,10 +45,10 @@ pull_to_client () { case "$heads" in *A*) - echo $ATIP > .git/refs/heads/A;; + git update-ref refs/heads/A "$ATIP";; esac && case "$heads" in *B*) - echo $BTIP > .git/refs/heads/B;; + git update-ref refs/heads/B "$BTIP";; esac && git symbolic-ref HEAD refs/heads/$(echo $heads \ | sed -e "s/^\(.\).*$/\1/") && @@ -92,8 +92,8 @@ test_expect_success 'setup' ' cur=$(($cur+1)) done && add B1 $A1 && - echo $ATIP > .git/refs/heads/A && - echo $BTIP > .git/refs/heads/B && + git update-ref refs/heads/A "$ATIP" && + git update-ref refs/heads/B "$BTIP" && git symbolic-ref HEAD refs/heads/B ' @@ -518,6 +518,47 @@ test_expect_success 'test --all, --depth, and explicit tag' ' ) >out-adt 2>error-adt ' +test_expect_success 'test --all with tag to non-tip' ' + git commit --allow-empty -m non-tip && + git commit --allow-empty -m tip && + git tag -m "annotated" non-tip HEAD^ && + ( + cd client && + git fetch-pack --all .. + ) +' + +test_expect_success 'test --all wrt tag to non-commits' ' + # create tag-to-{blob,tree,commit,tag}, making sure all tagged objects + # are reachable only via created tag references. + blob=$(echo "hello blob" | git hash-object -t blob -w --stdin) && + git tag -a -m "tag -> blob" tag-to-blob $blob && + \ + tree=$(printf "100644 blob $blob\tfile" | git mktree) && + git tag -a -m "tag -> tree" tag-to-tree $tree && + \ + tree2=$(printf "100644 blob $blob\tfile2" | git mktree) && + commit=$(git commit-tree -m "hello commit" $tree) && + git tag -a -m "tag -> commit" tag-to-commit $commit && + \ + blob2=$(echo "hello blob2" | git hash-object -t blob -w --stdin) && + tag=$(printf "object $blob2\ntype blob\ntag tag-to-blob2\n\ +tagger author A U Thor <author@example.com> 0 +0000\n\nhello tag" | git mktag) && + git tag -a -m "tag -> tag" tag-to-tag $tag && + \ + # `fetch-pack --all` should succeed fetching all those objects. + mkdir fetchall && + ( + cd fetchall && + git init && + git fetch-pack --all .. && + git cat-file blob $blob >/dev/null && + git cat-file tree $tree >/dev/null && + git cat-file commit $commit >/dev/null && + git cat-file tag $tag >/dev/null + ) +' + test_expect_success 'shallow fetch with tags does not break the repository' ' mkdir repo1 && ( @@ -711,6 +752,17 @@ test_expect_success 'fetch shallow since ...' ' test_cmp expected actual ' +test_expect_success 'clone shallow since selects no commits' ' + test_create_repo shallow-since-the-future && + ( + cd shallow-since-the-future && + GIT_COMMITTER_DATE="100000000 +0700" git commit --allow-empty -m one && + GIT_COMMITTER_DATE="200000000 +0700" git commit --allow-empty -m two && + GIT_COMMITTER_DATE="300000000 +0700" git commit --allow-empty -m three && + test_must_fail git clone --shallow-since "900000000 +0700" "file://$(pwd)/." ../shallow111 + ) +' + test_expect_success 'shallow clone exclude tag two' ' test_create_repo shallow-exclude && ( diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index ae5a530..e402aee 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -63,7 +63,7 @@ test_expect_success "fetch test" ' git commit -a -m "updated by origin" && cd two && git fetch && - test -f .git/refs/heads/one && + git rev-parse --verify refs/heads/one && mine=$(git rev-parse refs/heads/one) && his=$(cd ../one && git rev-parse refs/heads/master) && test "z$mine" = "z$his" @@ -73,8 +73,8 @@ test_expect_success "fetch test for-merge" ' cd "$D" && cd three && git fetch && - test -f .git/refs/heads/two && - test -f .git/refs/heads/one && + git rev-parse --verify refs/heads/two && + git rev-parse --verify refs/heads/one && master_in_two=$(cd ../two && git rev-parse master) && one_in_two=$(cd ../two && git rev-parse one) && { diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 02106c9..6a94948 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -10,6 +10,9 @@ test_expect_success setup ' test_tick && git commit -m initial && git tag mark && + git tag mark1.1 && + git tag mark1.2 && + git tag mark1.10 && git show-ref --tags -d | sed -e "s/ / /" >expected.tag && ( echo "$(git rev-parse HEAD) HEAD" @@ -39,6 +42,39 @@ test_expect_success 'ls-remote self' ' test_cmp expected.all actual ' +test_expect_success 'ls-remote --sort="version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark) refs/tags/mark + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + EOF + git ls-remote --sort="version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-version:refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-version:refname" --tags self >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote --sort="-refname" --tags self' ' + cat >expect <<-EOF && + $(git rev-parse mark1.2) refs/tags/mark1.2 + $(git rev-parse mark1.10) refs/tags/mark1.10 + $(git rev-parse mark1.1) refs/tags/mark1.1 + $(git rev-parse mark) refs/tags/mark + EOF + git ls-remote --sort="-refname" --tags self >actual && + test_cmp expect actual +' + test_expect_success 'dies when no remote specified and no default remotes found' ' test_must_fail git ls-remote ' @@ -131,7 +167,7 @@ test_expect_success 'Report no-match with --exit-code' ' test_expect_success 'Report match with --exit-code' ' git ls-remote --exit-code other.git "refs/tags/*" >actual && - git ls-remote . tags/mark >expect && + git ls-remote . tags/mark* >expect && test_cmp expect actual ' @@ -171,13 +207,17 @@ test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' ' test_expect_success 'ls-remote --symref' ' - cat >expect <<-\EOF && + git fetch origin && + cat >expect <<-EOF && ref: refs/heads/master HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/remotes/origin/master - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/tags/mark + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse HEAD) refs/remotes/origin/HEAD + $(git rev-parse refs/remotes/origin/master) refs/remotes/origin/master + $(git rev-parse refs/tags/mark) refs/tags/mark + $(git rev-parse refs/tags/mark1.1) refs/tags/mark1.1 + $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 + $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 EOF git ls-remote --symref >actual && test_cmp expect actual diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 8223913..a5077d8 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -94,6 +94,9 @@ mk_child() { } check_push_result () { + test $# -ge 3 || + error "bug in the test script: check_push_result requires at least 3 parameters" + repo_name="$1" shift @@ -553,10 +556,7 @@ test_expect_success 'branch.*.pushremote config order is irrelevant' ' test_expect_success 'push with dry-run' ' mk_test testrepo heads/master && - ( - cd testrepo && - old_commit=$(git show-ref -s --verify refs/heads/master) - ) && + old_commit=$(git -C testrepo show-ref -s --verify refs/heads/master) && git push --dry-run testrepo : && check_push_result testrepo $old_commit heads/master ' @@ -612,7 +612,7 @@ test_expect_success 'push does not update local refs on failure' ' chmod +x testrepo/.git/hooks/pre-receive && ( cd child && - git pull .. master + git pull .. master && test_must_fail git push && test $(git rev-parse master) != \ $(git rev-parse remotes/origin/master) @@ -634,7 +634,7 @@ test_expect_success 'pushing valid refs triggers post-receive and post-update ho orgmaster=$(cd testrepo && git show-ref -s --verify refs/heads/master) && newmaster=$(git show-ref -s --verify refs/heads/master) && orgnext=$(cd testrepo && git show-ref -s --verify refs/heads/next) && - newnext=$_z40 && + newnext=$ZERO_OID && git push testrepo refs/heads/master:refs/heads/master :refs/heads/next && ( cd testrepo/.git && @@ -672,15 +672,15 @@ test_expect_success 'deleting dangling ref triggers hooks with correct args' ' ( cd testrepo/.git && cat >pre-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/master + $ZERO_OID $ZERO_OID refs/heads/master EOF cat >update.expect <<-EOF && - refs/heads/master $_z40 $_z40 + refs/heads/master $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/master + $ZERO_OID $ZERO_OID refs/heads/master EOF cat >post-update.expect <<-EOF && @@ -703,12 +703,12 @@ test_expect_success 'deletion of a non-existent ref is not fed to post-receive a cd testrepo/.git && cat >pre-receive.expect <<-EOF && $orgmaster $newmaster refs/heads/master - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && refs/heads/master $orgmaster $newmaster - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && @@ -732,11 +732,11 @@ test_expect_success 'deletion of a non-existent ref alone does trigger post-rece ( cd testrepo/.git && cat >pre-receive.expect <<-EOF && - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF test_cmp pre-receive.expect pre-receive.actual && @@ -751,7 +751,7 @@ test_expect_success 'mixed ref updates, deletes, invalid deletes trigger hooks w orgmaster=$(cd testrepo && git show-ref -s --verify refs/heads/master) && newmaster=$(git show-ref -s --verify refs/heads/master) && orgnext=$(cd testrepo && git show-ref -s --verify refs/heads/next) && - newnext=$_z40 && + newnext=$ZERO_OID && orgpu=$(cd testrepo && git show-ref -s --verify refs/heads/pu) && newpu=$(git show-ref -s --verify refs/heads/master) && git push testrepo refs/heads/master:refs/heads/master \ @@ -763,14 +763,14 @@ test_expect_success 'mixed ref updates, deletes, invalid deletes trigger hooks w $orgmaster $newmaster refs/heads/master $orgnext $newnext refs/heads/next $orgpu $newpu refs/heads/pu - $_z40 $_z40 refs/heads/nonexistent + $ZERO_OID $ZERO_OID refs/heads/nonexistent EOF cat >update.expect <<-EOF && refs/heads/master $orgmaster $newmaster refs/heads/next $orgnext $newnext refs/heads/pu $orgpu $newpu - refs/heads/nonexistent $_z40 $_z40 + refs/heads/nonexistent $ZERO_OID $ZERO_OID EOF cat >post-receive.expect <<-EOF && @@ -1121,6 +1121,25 @@ test_expect_success 'fetch exact SHA1' ' ) ' +test_expect_success 'fetch exact SHA1 in protocol v2' ' + mk_test testrepo heads/master hidden/one && + git push testrepo master:refs/hidden/one && + git -C testrepo config transfer.hiderefs refs/hidden && + check_push_result testrepo $the_commit hidden/one && + + mk_child testrepo child && + git -C child config protocol.version 2 && + + # make sure $the_commit does not exist here + git -C child repack -a -d && + git -C child prune && + test_must_fail git -C child cat-file -t $the_commit && + + # fetching the hidden object succeeds by default + # NEEDSWORK: should this match the v0 behavior instead? + git -C child fetch -v ../testrepo $the_commit:refs/heads/copy +' + for configallowtipsha1inwant in true false do test_expect_success "shallow fetch reachable SHA1 (but not a ref), allowtipsha1inwant=$configallowtipsha1inwant" ' diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 9cc4b56..359e03f 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -574,11 +574,7 @@ test_expect_success "fetch new commits when submodule got renamed" ' git clone . downstream_rename && ( cd downstream_rename && - git submodule update --init && -# NEEDSWORK: we omitted --recursive for the submodule update here since -# that does not work. See test 7001 for mv "moving nested submodules" -# for details. Once that is fixed we should add the --recursive option -# here. + git submodule update --init --recursive && git checkout -b rename && git mv submodule submodule_renamed && ( diff --git a/t/t5527-fetch-odd-refs.sh b/t/t5527-fetch-odd-refs.sh index 207899a..3b0cb98 100755 --- a/t/t5527-fetch-odd-refs.sh +++ b/t/t5527-fetch-odd-refs.sh @@ -27,7 +27,7 @@ test_expect_success 'suffix ref is ignored during fetch' ' ' test_expect_success 'try to create repo with absurdly long refname' ' - ref240=$_z40/$_z40/$_z40/$_z40/$_z40/$_z40 && + ref240=$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID/$ZERO_OID && ref1440=$ref240/$ref240/$ref240/$ref240/$ref240/$ref240 && git init long && ( diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index df8d2f0..943231a 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -175,8 +175,8 @@ EOF test_expect_success POSIXPERM,SANITY 'shallow fetch from a read-only repo' ' cp -R .git read-only.git && - find read-only.git -print | xargs chmod -w && test_when_finished "find read-only.git -type d -print | xargs chmod +w" && + find read-only.git -print | xargs chmod -w && git clone --no-local --depth=2 read-only.git from-read-only && git --git-dir=from-read-only/.git log --format=%s >actual && cat >expect <<EOF && diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 21340e8..a2af693 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -377,5 +377,17 @@ test_expect_success 'push status output scrubs password' ' grep "^To $HTTPD_URL/smart/test_repo.git" status ' +test_expect_success 'colorize errors/hints' ' + cd "$ROOT_PATH"/test_repo_clone && + test_must_fail git -c color.transport=always -c color.advice=always \ + -c color.push=always \ + push origin origin/master^:master 2>act && + test_decode_color <act >decoded && + test_i18ngrep "<RED>.*rejected.*<RESET>" decoded && + test_i18ngrep "<RED>error: failed to push some refs" decoded && + test_i18ngrep "<YELLOW>hint: " decoded && + test_i18ngrep ! "^hint: " decoded +' + stop_httpd test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 8552184..6d7d88c 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -169,6 +169,17 @@ test_expect_success 'fetch changes via manual http-fetch' ' test_cmp file clone2/file ' +test_expect_success 'manual http-fetch without -a works just as well' ' + cp -R clone-tmpl clone3 && + + HEAD=$(git rev-parse --verify HEAD) && + (cd clone3 && + git http-fetch -w heads/master-new $HEAD $(git config remote.origin.url) && + git checkout master-new && + test $HEAD = $(git rev-parse --verify HEAD)) && + test_cmp file clone3/file +' + test_expect_success 'http remote detects correct HEAD' ' git push public master:other && (cd clone && diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index f5721b4..913089b 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -26,14 +26,14 @@ setup_askpass_helper cat >exp <<EOF > GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 > Accept: */* -> Accept-Encoding: gzip +> Accept-Encoding: ENCODINGS > Pragma: no-cache < HTTP/1.1 200 OK < Pragma: no-cache < Cache-Control: no-cache, max-age=0, must-revalidate < Content-Type: application/x-git-upload-pack-advertisement > POST /smart/repo.git/git-upload-pack HTTP/1.1 -> Accept-Encoding: gzip +> Accept-Encoding: ENCODINGS > Content-Type: application/x-git-upload-pack-request > Accept: application/x-git-upload-pack-result > Content-Length: xxx @@ -79,8 +79,13 @@ test_expect_success 'clone http repository' ' /^< Date: /d /^< Content-Length: /d /^< Transfer-Encoding: /d - " >act && - test_cmp exp act + " >actual && + sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ + actual >actual.smudged && + test_cmp exp actual.smudged && + + grep "Accept-Encoding:.*gzip" actual >actual.gzip && + test_line_count = 2 actual.gzip ' test_expect_success 'fetch changes via http' ' diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 90e0d6f..84a9557 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -3,10 +3,16 @@ test_description='test git-http-backend' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-httpd.sh + +if ! test_have_prereq CURL; then + skip_all='skipping raw http-backend tests, curl not available' + test_done +fi + start_httpd GET() { - curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out 2>/dev/null && + curl --include "$HTTPD_URL/$SMART/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// @@ -19,7 +25,7 @@ GET() { POST() { curl --include --data "$2" \ --header "Content-Type: application/x-$1-request" \ - "$HTTPD_URL/smart/repo.git/$1" >out 2>/dev/null && + "$HTTPD_URL/smart/repo.git/$1" >out && tr '\015' Q <out | sed ' s/Q$// diff --git a/t/t5571-pre-push-hook.sh b/t/t5571-pre-push-hook.sh index ba975bb..ac53d63 100755 --- a/t/t5571-pre-push-hook.sh +++ b/t/t5571-pre-push-hook.sh @@ -78,8 +78,8 @@ test_expect_success 'push to default' ' cat >expected <<EOF parent1 repo1 -refs/tags/one $COMMIT1 refs/tags/tag1 $_z40 -HEAD~ $COMMIT2 refs/heads/prev $_z40 +refs/tags/one $COMMIT1 refs/tags/tag1 $ZERO_OID +HEAD~ $COMMIT2 refs/heads/prev $ZERO_OID EOF test_expect_success 'push non-branches' ' @@ -90,7 +90,7 @@ test_expect_success 'push non-branches' ' cat >expected <<EOF parent1 repo1 -(delete) $_z40 refs/heads/prev $COMMIT2 +(delete) $ZERO_OID refs/heads/prev $COMMIT2 EOF test_expect_success 'push delete' ' @@ -101,7 +101,7 @@ test_expect_success 'push delete' ' cat >expected <<EOF repo1 repo1 -HEAD $COMMIT3 refs/heads/other $_z40 +HEAD $COMMIT3 refs/heads/other $ZERO_OID EOF test_expect_success 'push to URL' ' diff --git a/t/t5572-pull-submodule.sh b/t/t5572-pull-submodule.sh index 321bd37..f916729 100755 --- a/t/t5572-pull-submodule.sh +++ b/t/t5572-pull-submodule.sh @@ -132,4 +132,25 @@ test_expect_success 'pull rebase recursing fails with conflicts' ' test_i18ngrep "locally recorded submodule modifications" err ' +test_expect_success 'branch has no merge base with remote-tracking counterpart' ' + rm -rf parent child && + + test_create_repo a-submodule && + test_commit -C a-submodule foo && + + test_create_repo parent && + git -C parent submodule add "$(pwd)/a-submodule" && + git -C parent commit -m foo && + + git clone parent child && + + # Reset master so that it has no merge base with + # refs/remotes/origin/master. + OTHER=$(git -C child commit-tree -m bar \ + $(git -C child rev-parse HEAD^{tree})) && + git -C child reset --hard "$OTHER" && + + git -C child pull --recurse-submodules --rebase +' + test_done diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 9594e89..747775c 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -29,7 +29,7 @@ test_expect_success GPG 'create repositories with signed commits' ' echo 4 >d && git add d && test_tick && git commit -S -m "bad" && git cat-file commit HEAD >raw && - sed -e "s/bad/forged bad/" raw >forged && + sed -e "s/^bad/forged bad/" raw >forged && git hash-object -w -t commit forged >forged.commit && git checkout $(cat forged.commit) ) && diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh new file mode 100755 index 0000000..75ec79e --- /dev/null +++ b/t/t5701-git-serve.sh @@ -0,0 +1,211 @@ +#!/bin/sh + +test_description='test git-serve and server commands' + +. ./test-lib.sh + +test_expect_success 'test capability advertisement' ' + cat >expect <<-EOF && + version 2 + agent=git/$(git version | cut -d" " -f3) + ls-refs + fetch=shallow + server-option + 0000 + EOF + + git serve --advertise-capabilities >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'stateless-rpc flag does not list capabilities' ' + # Empty request + test-pkt-line pack >in <<-EOF && + 0000 + EOF + git serve --stateless-rpc >out <in && + test_must_be_empty out && + + # EOF + git serve --stateless-rpc >out && + test_must_be_empty out +' + +test_expect_success 'request invalid capability' ' + test-pkt-line pack >in <<-EOF && + foobar + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "unknown capability" err +' + +test_expect_success 'request with no command' ' + test-pkt-line pack >in <<-EOF && + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "no command requested" err +' + +test_expect_success 'request invalid command' ' + test-pkt-line pack >in <<-EOF && + command=foo + agent=git/test + 0000 + EOF + test_must_fail git serve --stateless-rpc 2>err <in && + test_i18ngrep "invalid command" err +' + +# Test the basics of ls-refs +# +test_expect_success 'setup some refs and tags' ' + test_commit one && + git branch dev master && + test_commit two && + git symbolic-ref refs/heads/release refs/heads/master && + git tag -a -m "annotated tag" annotated-tag +' + +test_expect_success 'basics of ls-refs' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'basic ref-prefixes' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/master + ref-prefix refs/tags/one + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/tags/one) refs/tags/one + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'refs/heads prefix' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'peel parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + peel + ref-prefix refs/tags/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/tags/annotated-tag) refs/tags/annotated-tag peeled:$(git rev-parse refs/tags/annotated-tag^{}) + $(git rev-parse refs/tags/one) refs/tags/one + $(git rev-parse refs/tags/two) refs/tags/two + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'symrefs parameter' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + 0001 + symrefs + ref-prefix refs/heads/ + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse refs/heads/dev) refs/heads/dev + $(git rev-parse refs/heads/master) refs/heads/master + $(git rev-parse refs/heads/release) refs/heads/release symref-target:refs/heads/master + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'sending server-options' ' + test-pkt-line pack >in <<-EOF && + command=ls-refs + server-option=hello + server-option=world + 0001 + ref-prefix HEAD + 0000 + EOF + + cat >expect <<-EOF && + $(git rev-parse HEAD) HEAD + 0000 + EOF + + git serve --stateless-rpc <in >out && + test-pkt-line unpack <out >actual && + test_cmp actual expect +' + +test_expect_success 'unexpected lines are not allowed in fetch request' ' + git init server && + + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + this-is-not-a-command + 0000 + EOF + + test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + grep "unexpected line: .this-is-not-a-command." err +' + +test_done diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh new file mode 100755 index 0000000..a4fe650 --- /dev/null +++ b/t/t5702-protocol-v2.sh @@ -0,0 +1,431 @@ +#!/bin/sh + +test_description='test git wire-protocol version 2' + +TEST_NO_CREATE_REPO=1 + +. ./test-lib.sh + +# Test protocol v2 with 'git://' transport +# +. "$TEST_DIRECTORY"/lib-git-daemon.sh +start_git_daemon --export-all --enable=receive-pack +daemon_parent=$GIT_DAEMON_DOCUMENT_ROOT_PATH/parent + +test_expect_success 'create repo to be served by git-daemon' ' + git init "$daemon_parent" && + test_commit -C "$daemon_parent" one +' + +test_expect_success 'list refs with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "$GIT_DAEMON_URL/parent" >actual && + + # Client requested to use protocol v2 + grep "git> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "$GIT_DAEMON_URL/parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "$GIT_DAEMON_URL/parent" master >actual && + + cat >expect <<-EOF && + $(git -C "$daemon_parent" rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'clone with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "$GIT_DAEMON_URL/parent" daemon_child && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "clone> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$daemon_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + fetch && + + git -C daemon_child log -1 --format=%s origin/master >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'pull with git:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + pull && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "fetch> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'push with git:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C daemon_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C daemon_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C daemon_child log -1 --format=%s >actual && + git -C "$daemon_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + ! grep "push> .*\\\0\\\0version=2\\\0$" log && + # Server responded using protocol v2 + ! grep "push< version 2" log +' + +stop_git_daemon + +# Test protocol v2 with 'file://' transport +# +test_expect_success 'create repo to be served by file:// transport' ' + git init file_parent && + test_commit -C file_parent one +' + +test_expect_success 'list refs with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote --symref "file://$(pwd)/file_parent" >actual && + + # Server responded using protocol v2 + grep "git< version 2" log && + + git ls-remote --symref "file://$(pwd)/file_parent" >expect && + test_cmp actual expect +' + +test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect +' + +test_expect_success 'server-options are sent when using ls-remote' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + ls-remote -o hello -o world "file://$(pwd)/file_parent" master >actual && + + cat >expect <<-EOF && + $(git -C file_parent rev-parse refs/heads/master)$(printf "\t")refs/heads/master + EOF + + test_cmp actual expect && + grep "server-option=hello" log && + grep "server-option=world" log +' + + +test_expect_success 'clone with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone "file://$(pwd)/file_parent" file_child && + + git -C file_child log -1 --format=%s >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "clone< version 2" log +' + +test_expect_success 'fetch with file:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "fetch< version 2" log +' + +test_expect_success 'ref advertisment is filtered during fetch using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent three && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + ! grep "refs/tags/one" log && + ! grep "refs/tags/two" log && + ! grep "refs/tags/three" log +' + +test_expect_success 'server-options are sent when fetching' ' + test_when_finished "rm -f log" && + + test_commit -C file_parent four && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch -o hello -o world origin master && + + git -C file_child log -1 --format=%s origin/master >actual && + git -C file_parent log -1 --format=%s >expect && + test_cmp expect actual && + + grep "server-option=hello" log && + grep "server-option=world" log +' + +test_expect_success 'upload-pack respects config using protocol v2' ' + git init server && + write_script server/.git/hook <<-\EOF && + touch hookout + "$@" + EOF + test_commit -C server one && + + test_config_global uploadpack.packobjectshook ./hook && + test_path_is_missing server/.git/hookout && + git -c protocol.version=2 clone "file://$(pwd)/server" client && + test_path_is_file server/.git/hookout +' + +test_expect_success 'setup filter tests' ' + rm -rf server client && + git init server && + + # 1 commit to create a file, and 1 commit to modify it + test_commit -C server message1 a.txt && + test_commit -C server message2 a.txt && + git -C server config protocol.version 2 && + git -C server config uploadpack.allowfilter 1 && + git -C server config uploadpack.allowanysha1inwant 1 && + git -C server config protocol.version 2 +' + +test_expect_success 'partial clone' ' + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + clone --filter=blob:none "file://$(pwd)/server" client && + grep "version 2" trace && + + # Ensure that the old version of the file is missing + git -C client rev-list master --quiet --objects --missing=print \ + >observed.oids && + grep "$(git -C server rev-parse message1:a.txt)" observed.oids && + + # Ensure that client passes fsck + git -C client fsck +' + +test_expect_success 'dynamically fetch missing object' ' + rm "$(pwd)/trace" && + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + cat-file -p $(git -C server rev-parse message1:a.txt) && + grep "version 2" trace +' + +test_expect_success 'partial fetch' ' + rm -rf client "$(pwd)/trace" && + git init client && + SERVER="file://$(pwd)/server" && + test_config -C client extensions.partialClone "$SERVER" && + + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --filter=blob:none "$SERVER" master:refs/heads/other && + grep "version 2" trace && + + # Ensure that the old version of the file is missing + git -C client rev-list other --quiet --objects --missing=print \ + >observed.oids && + grep "$(git -C server rev-parse message1:a.txt)" observed.oids && + + # Ensure that client passes fsck + git -C client fsck +' + +test_expect_success 'do not advertise filter if not configured to do so' ' + SERVER="file://$(pwd)/server" && + + rm "$(pwd)/trace" && + git -C server config uploadpack.allowfilter 1 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + ls-remote "$SERVER" && + grep "fetch=.*filter" trace && + + rm "$(pwd)/trace" && + git -C server config uploadpack.allowfilter 0 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 \ + ls-remote "$SERVER" && + grep "fetch=" trace >fetch_capabilities && + ! grep filter fetch_capabilities +' + +test_expect_success 'partial clone warns if filter is not advertised' ' + rm -rf client && + git -C server config uploadpack.allowfilter 0 && + git -c protocol.version=2 \ + clone --filter=blob:none "file://$(pwd)/server" client 2>err && + test_i18ngrep "filtering not recognized by server, ignoring" err +' + +test_expect_success 'even with handcrafted request, filter does not work if not advertised' ' + git -C server config uploadpack.allowfilter 0 && + + # Custom request that tries to filter even though it is not advertised. + test-pkt-line pack >in <<-EOF && + command=fetch + 0001 + want $(git -C server rev-parse master) + filter blob:none + 0000 + EOF + + test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + grep "unexpected line: .filter blob:none." err && + + # Exercise to ensure that if advertised, filter works + git -C server config uploadpack.allowfilter 1 && + git -C server serve --stateless-rpc <in >/dev/null +' + +test_expect_success 'default refspec is used to filter ref when fetchcing' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" git -C file_child -c protocol.version=2 \ + fetch origin && + + git -C file_child log -1 --format=%s three >actual && + git -C file_parent log -1 --format=%s three >expect && + test_cmp expect actual && + + grep "ref-prefix refs/heads/" log && + grep "ref-prefix refs/tags/" log +' + +# Test protocol v2 with 'http://' transport +# +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'create repo to be served by http:// transport' ' + git init "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" config http.receivepack true && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" one +' + +test_expect_success 'clone with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + clone "$HTTPD_URL/smart/http_parent" http_child && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'fetch with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch && + + git -C http_child log -1 --format=%s origin/master >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s >expect && + test_cmp expect actual && + + # Server responded using protocol v2 + grep "git< version 2" log +' + +test_expect_success 'push with http:// and a config of v2 does not request v2' ' + test_when_finished "rm -f log" && + # Till v2 for push is designed, make sure that if a client has + # protocol.version configured to use v2, that the client instead falls + # back and uses v0. + + test_commit -C http_child three && + + # Push to another branch, as the target repository has the + # master branch checked out and we cannot push into it. + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + push origin HEAD:client_branch && + + git -C http_child log -1 --format=%s >actual && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && + test_cmp expect actual && + + # Client didnt request to use protocol v2 + ! grep "Git-Protocol: version=2" log && + # Server didnt respond using protocol v2 + ! grep "git< version 2" log +' + + +stop_httpd + +test_done diff --git a/t/t6001-rev-list-graft.sh b/t/t6001-rev-list-graft.sh index 05ddc69..7504ba4 100755 --- a/t/t6001-rev-list-graft.sh +++ b/t/t6001-rev-list-graft.sh @@ -110,4 +110,13 @@ do " done + +test_expect_success 'show advice that grafts are deprecated' ' + git show HEAD 2>err && + test_i18ngrep "git replace" err && + test_config advice.graftFileDeprecated false && + git show HEAD 2>err && + test_i18ngrep ! "git replace" err +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index 98be78b..ec42c2f 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -447,8 +447,8 @@ test_expect_success '--abbrev' ' git log -1 --format="%h %h %h" HEAD >actual1 && git log -1 --abbrev=5 --format="%h %h %h" HEAD >actual2 && git log -1 --abbrev=5 --format="%H %H %H" HEAD >actual3 && - sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual2 >fuzzy2 && - sed -e "s/$_x40/LONG/g" -e "s/$_x05/SHORT/g" <actual3 >fuzzy3 && + sed -e "s/$OID_REGEX/LONG/g" -e "s/$_x05/SHORT/g" <actual2 >fuzzy2 && + sed -e "s/$OID_REGEX/LONG/g" -e "s/$_x05/SHORT/g" <actual3 >fuzzy3 && test_cmp expect2 fuzzy2 && test_cmp expect3 fuzzy3 && ! test_cmp actual1 actual2 diff --git a/t/t6010-merge-base.sh b/t/t6010-merge-base.sh index 31db7b5..aa2d360 100755 --- a/t/t6010-merge-base.sh +++ b/t/t6010-merge-base.sh @@ -34,7 +34,7 @@ doit () { commit=$(echo $NAME | git commit-tree $T $PARENTS) && - echo $commit >.git/refs/tags/$NAME && + git update-ref "refs/tags/$NAME" "$commit" && echo $commit } diff --git a/t/t6012-rev-list-simplify.sh b/t/t6012-rev-list-simplify.sh index 2a0fbb8..b5a1190 100755 --- a/t/t6012-rev-list-simplify.sh +++ b/t/t6012-rev-list-simplify.sh @@ -9,7 +9,7 @@ note () { } unnote () { - git name-rev --tags --stdin | sed -e "s|$_x40 (tags/\([^)]*\)) |\1 |g" + git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\)) |\1 |g" } test_expect_success setup ' diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index a1fad69..b760c22 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -247,7 +247,7 @@ test_expect_success 'merge of identical changes in a renamed file' ' git reset --hard HEAD^ && git checkout change && GIT_MERGE_VERBOSITY=3 git merge change+rename >out && - test_i18ngrep "^Skipped B" out + test_i18ngrep ! "^Skipped B" out ' test_expect_success 'setup for rename + d/f conflicts' ' @@ -635,10 +635,9 @@ test_expect_success 'setup avoid unnecessary update, normal rename' ' test_expect_success 'avoid unnecessary update, normal rename' ' git checkout -q avoid-unnecessary-update-1^0 && - test-tool chmtime =1000000000 rename && - test-tool chmtime -v +0 rename >expect && + test-tool chmtime --get =1000000000 rename >expect && git merge merge-branch-1 && - test-tool chmtime -v +0 rename >actual && + test-tool chmtime --get rename >actual && test_cmp expect actual # "rename" should have stayed intact ' @@ -668,10 +667,9 @@ test_expect_success 'setup to test avoiding unnecessary update, with D/F conflic test_expect_success 'avoid unnecessary update, with D/F conflict' ' git checkout -q avoid-unnecessary-update-2^0 && - test-tool chmtime =1000000000 df && - test-tool chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge merge-branch-2 && - test-tool chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -700,10 +698,9 @@ test_expect_success 'setup avoid unnecessary update, dir->(file,nothing)' ' test_expect_success 'avoid unnecessary update, dir->(file,nothing)' ' git checkout -q master^0 && - test-tool chmtime =1000000000 df && - test-tool chmtime -v +0 df >expect && + test-tool chmtime --get =1000000000 df >expect && git merge side && - test-tool chmtime -v +0 df >actual && + test-tool chmtime --get df >actual && test_cmp expect actual # "df" should have stayed intact ' @@ -730,10 +727,9 @@ test_expect_success 'setup avoid unnecessary update, modify/delete' ' test_expect_success 'avoid unnecessary update, modify/delete' ' git checkout -q master^0 && - test-tool chmtime =1000000000 file && - test-tool chmtime -v +0 file >expect && + test-tool chmtime --get =1000000000 file >expect && test_must_fail git merge side && - test-tool chmtime -v +0 file >actual && + test-tool chmtime --get file >actual && test_cmp expect actual # "file" should have stayed intact ' @@ -759,10 +755,9 @@ test_expect_success 'setup avoid unnecessary update, rename/add-dest' ' test_expect_success 'avoid unnecessary update, rename/add-dest' ' git checkout -q master^0 && - test-tool chmtime =1000000000 newfile && - test-tool chmtime -v +0 newfile >expect && + test-tool chmtime --get =1000000000 newfile >expect && git merge side && - test-tool chmtime -v +0 newfile >actual && + test-tool chmtime --get newfile >actual && test_cmp expect actual # "file" should have stayed intact ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index 18aa88b..b562130 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -4,12 +4,6 @@ test_description='recursive merge corner cases involving criss-cross merges' . ./test-lib.sh -get_clean_checkout () { - git reset --hard && - git clean -fdqx && - git checkout "$1" -} - # # L1 L2 # o---o @@ -21,51 +15,66 @@ get_clean_checkout () { # test_expect_success 'setup basic criss-cross + rename with no modifications' ' - ten="0 1 2 3 4 5 6 7 8 9" && - for i in $ten - do - echo line $i in a sample file - done >one && - for i in $ten - do - echo line $i in another sample file - done >two && - git add one two && - test_tick && git commit -m initial && - - git branch L1 && - git checkout -b R1 && - git mv one three && - test_tick && git commit -m R1 && - - git checkout L1 && - git mv two three && - test_tick && git commit -m L1 && - - git checkout L1^0 && - test_tick && git merge -s ours R1 && - git tag L2 && - - git checkout R1^0 && - test_tick && git merge -s ours L1 && - git tag R2 + test_create_repo basic-rename && + ( + cd basic-rename && + + ten="0 1 2 3 4 5 6 7 8 9" && + for i in $ten + do + echo line $i in a sample file + done >one && + for i in $ten + do + echo line $i in another sample file + done >two && + git add one two && + test_tick && git commit -m initial && + + git branch L1 && + git checkout -b R1 && + git mv one three && + test_tick && git commit -m R1 && + + git checkout L1 && + git mv two three && + test_tick && git commit -m L1 && + + git checkout L1^0 && + test_tick && git merge -s ours R1 && + git tag L2 && + + git checkout R1^0 && + test_tick && git merge -s ours L1 && + git tag R2 + ) ' test_expect_success 'merge simple rename+criss-cross with no modifications' ' - git reset --hard && - git checkout L2^0 && - - test_must_fail git merge -s recursive R2^0 && - - test 2 = $(git ls-files -s | wc -l) && - test 2 = $(git ls-files -u | wc -l) && - test 2 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:three) = $(git rev-parse L2:three) && - test $(git rev-parse :3:three) = $(git rev-parse R2:three) && - - test $(git rev-parse L2:three) = $(git hash-object three~HEAD) && - test $(git rev-parse R2:three) = $(git hash-object three~R2^0) + ( + cd basic-rename && + + git reset --hard && + git checkout L2^0 && + + test_must_fail git merge -s recursive R2^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >expect \ + L2:three R2:three \ + L2:three R2:three && + git rev-parse >actual \ + :2:three :3:three && + git hash-object >>actual \ + three~HEAD three~R2^0 + test_cmp expect actual + ) ' # @@ -81,58 +90,67 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' # test_expect_success 'setup criss-cross + rename merges with basic modification' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - ten="0 1 2 3 4 5 6 7 8 9" && - for i in $ten - do - echo line $i in a sample file - done >one && - for i in $ten - do - echo line $i in another sample file - done >two && - git add one two && - test_tick && git commit -m initial && - - git branch L1 && - git checkout -b R1 && - git mv one three && - echo more >>two && - git add two && - test_tick && git commit -m R1 && - - git checkout L1 && - git mv two three && - test_tick && git commit -m L1 && - - git checkout L1^0 && - test_tick && git merge -s ours R1 && - git tag L2 && - - git checkout R1^0 && - test_tick && git merge -s ours L1 && - git tag R2 + test_create_repo rename-modify && + ( + cd rename-modify && + + ten="0 1 2 3 4 5 6 7 8 9" && + for i in $ten + do + echo line $i in a sample file + done >one && + for i in $ten + do + echo line $i in another sample file + done >two && + git add one two && + test_tick && git commit -m initial && + + git branch L1 && + git checkout -b R1 && + git mv one three && + echo more >>two && + git add two && + test_tick && git commit -m R1 && + + git checkout L1 && + git mv two three && + test_tick && git commit -m L1 && + + git checkout L1^0 && + test_tick && git merge -s ours R1 && + git tag L2 && + + git checkout R1^0 && + test_tick && git merge -s ours L1 && + git tag R2 + ) ' test_expect_success 'merge criss-cross + rename merges with basic modification' ' - git reset --hard && - git checkout L2^0 && - - test_must_fail git merge -s recursive R2^0 && - - test 2 = $(git ls-files -s | wc -l) && - test 2 = $(git ls-files -u | wc -l) && - test 2 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:three) = $(git rev-parse L2:three) && - test $(git rev-parse :3:three) = $(git rev-parse R2:three) && - - test $(git rev-parse L2:three) = $(git hash-object three~HEAD) && - test $(git rev-parse R2:three) = $(git hash-object three~R2^0) + ( + cd rename-modify && + + git checkout L2^0 && + + test_must_fail git merge -s recursive R2^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >expect \ + L2:three R2:three \ + L2:three R2:three && + git rev-parse >actual \ + :2:three :3:three && + git hash-object >>actual \ + three~HEAD three~R2^0 + test_cmp expect actual + ) ' # @@ -156,64 +174,74 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' # test_expect_success 'setup differently handled merges of rename/add conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "0\n1\n2\n3\n4\n5\n6\n7\n8\n9\n" >a && - git add a && - test_tick && git commit -m A && - - git branch B && - git checkout -b C && - echo 10 >>a && - echo "other content" >>new_a && - git add a new_a && - test_tick && git commit -m C && - - git checkout B && - git mv a new_a && - test_tick && git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - git clean -f && - test_tick && git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - rm new_a~HEAD new_a && - printf "Incorrectly merged content" >>new_a && - git add -u && - test_tick && git commit -m E && - git tag E + test_create_repo rename-add && + ( + cd rename-add && + + printf "0\n1\n2\n3\n4\n5\n6\n7\n8\n9\n" >a && + git add a && + test_tick && git commit -m A && + + git branch B && + git checkout -b C && + echo 10 >>a && + echo "other content" >>new_a && + git add a new_a && + test_tick && git commit -m C && + + git checkout B && + git mv a new_a && + test_tick && git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + git clean -f && + test_tick && git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + rm new_a~HEAD new_a && + printf "Incorrectly merged content" >>new_a && + git add -u && + test_tick && git commit -m E && + git tag E + ) ' test_expect_success 'git detects differently handled merges conflict' ' - git reset --hard && - git checkout D^0 && - - test_must_fail git merge -s recursive E^0 && - - test 3 = $(git ls-files -s | wc -l) && - test 3 = $(git ls-files -u | wc -l) && - test 0 = $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:new_a) = $(git rev-parse D:new_a) && - test $(git rev-parse :3:new_a) = $(git rev-parse E:new_a) && - - git cat-file -p B:new_a >>merged && - git cat-file -p C:new_a >>merge-me && - >empty && - test_must_fail git merge-file \ - -L "Temporary merge branch 2" \ - -L "" \ - -L "Temporary merge branch 1" \ - merged empty merge-me && - sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && - test $(git rev-parse :1:new_a) = $(git hash-object merged-internal) + ( + cd rename-add && + + git checkout D^0 && + + test_must_fail git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + D:new_a E:new_a && + git rev-parse >actual \ + :2:new_a :3:new_a && + test_cmp expect actual + + git cat-file -p B:new_a >ours && + git cat-file -p C:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "Temporary merge branch 2" \ + -L "" \ + -L "Temporary merge branch 1" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && + git cat-file -p :1:new_a >actual && + test_cmp expect actual + ) ' # @@ -236,67 +264,85 @@ test_expect_success 'git detects differently handled merges conflict' ' # Merging commits D & E should result in modify/delete conflict. test_expect_success 'setup criss-cross + modify/delete resolved differently' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo A >file && - git add file && - test_tick && - git commit -m A && - - git branch B && - git checkout -b C && - git rm file && - test_tick && - git commit -m C && - - git checkout B && - echo B >file && - git add file && - test_tick && - git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - echo B >file && - git add file && - test_tick && - git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - git rm file && - test_tick && - git commit -m E && - git tag E + test_create_repo modify-delete && + ( + cd modify-delete && + + echo A >file && + git add file && + test_tick && + git commit -m A && + + git branch B && + git checkout -b C && + git rm file && + test_tick && + git commit -m C && + + git checkout B && + echo B >file && + git add file && + test_tick && + git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + echo B >file && + git add file && + test_tick && + git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + git rm file && + test_tick && + git commit -m E && + git tag E + ) ' test_expect_success 'git detects conflict merging criss-cross+modify/delete' ' - git checkout D^0 && + ( + cd modify-delete && + + git checkout D^0 && - test_must_fail git merge -s recursive E^0 && + test_must_fail git merge -s recursive E^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && - test $(git rev-parse :1:file) = $(git rev-parse master:file) && - test $(git rev-parse :2:file) = $(git rev-parse B:file) + git rev-parse >expect \ + master:file B:file && + git rev-parse >actual \ + :1:file :2:file && + test_cmp expect actual + ) ' test_expect_success 'git detects conflict merging criss-cross+modify/delete, reverse direction' ' - git reset --hard && - git checkout E^0 && + ( + cd modify-delete && - test_must_fail git merge -s recursive D^0 && + git reset --hard && + git checkout E^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && + test_must_fail git merge -s recursive D^0 && - test $(git rev-parse :1:file) = $(git rev-parse master:file) && - test $(git rev-parse :3:file) = $(git rev-parse B:file) + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + + git rev-parse >expect \ + master:file B:file && + git rev-parse >actual \ + :1:file :3:file && + test_cmp expect actual + ) ' # @@ -336,120 +382,164 @@ test_expect_success 'git detects conflict merging criss-cross+modify/delete, rev # test_expect_success 'setup differently handled merges of directory/file conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >ignore-me && - git add ignore-me && - test_tick && - git commit -m A && - git tag A && - - git branch B && - git checkout -b C && - mkdir a && - echo 10 >a/file && - git add a/file && - test_tick && - git commit -m C && - - git checkout B && - echo 5 >a && - git add a && - test_tick && - git commit -m B && - - git checkout B^0 && - test_must_fail git merge C && - git clean -f && - rm -rf a/ && - echo 5 >a && - git add a && - test_tick && - git commit -m D && - git tag D && - - git checkout C^0 && - test_must_fail git merge B && - git clean -f && - git rm --cached a && - echo 10 >a/file && - git add a/file && - test_tick && - git commit -m E1 && - git tag E1 && - - git checkout C^0 && - test_must_fail git merge B && - git clean -f && - git rm --cached a && - printf "10\n11\n" >a/file && - git add a/file && - test_tick && - git commit -m E2 && - git tag E2 + test_create_repo directory-file && + ( + cd directory-file && + + >ignore-me && + git add ignore-me && + test_tick && + git commit -m A && + git tag A && + + git branch B && + git checkout -b C && + mkdir a && + echo 10 >a/file && + git add a/file && + test_tick && + git commit -m C && + + git checkout B && + echo 5 >a && + git add a && + test_tick && + git commit -m B && + + git checkout B^0 && + test_must_fail git merge C && + git clean -f && + rm -rf a/ && + echo 5 >a && + git add a && + test_tick && + git commit -m D && + git tag D && + + git checkout C^0 && + test_must_fail git merge B && + git clean -f && + git rm --cached a && + echo 10 >a/file && + git add a/file && + test_tick && + git commit -m E1 && + git tag E1 && + + git checkout C^0 && + test_must_fail git merge B && + git clean -f && + git rm --cached a && + printf "10\n11\n" >a/file && + git add a/file && + test_tick && + git commit -m E2 && + git tag E2 + ) ' test_expect_success 'merge of D & E1 fails but has appropriate contents' ' - get_clean_checkout D^0 && - - test_must_fail git merge -s recursive E1^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - test $(git rev-parse :2:a) = $(git rev-parse B:a) + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout D^0 && + + test_must_fail git merge -s recursive E1^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:ignore-me B:a && + git rev-parse >actual \ + :0:ignore-me :2:a && + test_cmp expect actual + ) ' test_expect_success 'merge of E1 & D fails but has appropriate contents' ' - get_clean_checkout E1^0 && - - test_must_fail git merge -s recursive D^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - test $(git rev-parse :3:a) = $(git rev-parse B:a) + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout E1^0 && + + test_must_fail git merge -s recursive D^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:ignore-me B:a && + git rev-parse >actual \ + :0:ignore-me :3:a && + test_cmp expect actual + ) ' test_expect_success 'merge of D & E2 fails but has appropriate contents' ' - get_clean_checkout D^0 && - - test_must_fail git merge -s recursive E2^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :2:a) = $(git rev-parse B:a) && - test $(git rev-parse :3:a/file) = $(git rev-parse E2:a/file) && - test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) && - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - - test -f a~HEAD + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout D^0 && + + test_must_fail git merge -s recursive E2^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >expect \ + B:a E2:a/file c:a/file A:ignore-me && + git rev-parse >actual \ + :2:a :3:a/file :1:a/file :0:ignore-me && + test_cmp expect actual + + test_path_is_file a~HEAD + ) ' test_expect_success 'merge of E2 & D fails but has appropriate contents' ' - get_clean_checkout E2^0 && - - test_must_fail git merge -s recursive D^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :3:a) = $(git rev-parse B:a) && - test $(git rev-parse :2:a/file) = $(git rev-parse E2:a/file) && - test $(git rev-parse :1:a/file) = $(git rev-parse C:a/file) && - test $(git rev-parse :0:ignore-me) = $(git rev-parse A:ignore-me) && - - test -f a~D^0 + test_when_finished "git -C directory-file reset --hard" && + test_when_finished "git -C directory-file clean -fdqx" && + ( + cd directory-file && + + git checkout E2^0 && + + test_must_fail git merge -s recursive D^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >expect \ + B:a E2:a/file c:a/file A:ignore-me && + git rev-parse >actual \ + :3:a :2:a/file :1:a/file :0:ignore-me && + test_cmp expect actual + + test_path_is_file a~D^0 + ) ' # @@ -492,52 +582,58 @@ test_expect_success 'merge of E2 & D fails but has appropriate contents' ' # but that may cancel out at the final merge stage". test_expect_success 'setup rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify' ' - git reset --hard && - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - echo 7 >>b && - git add -u && - git commit -m B && - - git checkout -b C A && - git mv a c && - git commit -m C && - - git checkout -q B^0 && - git merge --no-commit -s ours C^0 && - git mv b newname && - git commit -m "Merge commit C^0 into HEAD" && - git tag D && - - git checkout -q C^0 && - git merge --no-commit -s ours B^0 && - git mv c newname && - printf "7\n8\n" >>newname && - git add -u && - git commit -m "Merge commit B^0 into HEAD" && - git tag E + test_create_repo rename-squared-squared && + ( + cd rename-squared-squared && + + printf "1\n2\n3\n4\n5\n6\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + echo 7 >>b && + git add -u && + git commit -m B && + + git checkout -b C A && + git mv a c && + git commit -m C && + + git checkout -q B^0 && + git merge --no-commit -s ours C^0 && + git mv b newname && + git commit -m "Merge commit C^0 into HEAD" && + git tag D && + + git checkout -q C^0 && + git merge --no-commit -s ours B^0 && + git mv c newname && + printf "7\n8\n" >>newname && + git add -u && + git commit -m "Merge commit B^0 into HEAD" && + git tag E + ) ' test_expect_success 'handle rename/rename(1to2)/modify followed by what looks like rename/rename(2to1)/modify' ' - git checkout D^0 && + ( + cd rename-squared-squared && + + git checkout D^0 && - git merge -s recursive E^0 && + git merge -s recursive E^0 && - test 1 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse HEAD:newname) = $(git rev-parse E:newname) + test $(git rev-parse HEAD:newname) = $(git rev-parse E:newname) + ) ' # @@ -562,59 +658,72 @@ test_expect_success 'handle rename/rename(1to2)/modify followed by what looks li # renaming carefully (both in the virtual merge base and later), and getting # content merge handled. -test_expect_success 'setup criss-cross + rename/rename/add + modify/modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "lots\nof\nwords\nand\ncontent\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a c && - printf "2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m C && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git checkout C -- a c && - mv a old_a && - echo 1 >a && - cat old_a >>a && - rm old_a && - git add -u && - git commit -m "Merge commit C^0 into HEAD" && - git tag D && - - git checkout C^0 && - git merge --no-commit -s ours B^0 && - git checkout B -- b && - echo 8 >>a && - git add -u && - git commit -m "Merge commit B^0 into HEAD" && - git tag E +test_expect_success 'setup criss-cross + rename/rename/add-source + modify/modify' ' + test_create_repo rename-rename-add-source && + ( + cd rename-rename-add-source && + + printf "lots\nof\nwords\nand\ncontent\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a c && + printf "2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m C && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git checkout C -- a c && + mv a old_a && + echo 1 >a && + cat old_a >>a && + rm old_a && + git add -u && + git commit -m "Merge commit C^0 into HEAD" && + git tag D && + + git checkout C^0 && + git merge --no-commit -s ours B^0 && + git checkout B -- b && + echo 8 >>a && + git add -u && + git commit -m "Merge commit B^0 into HEAD" && + git tag E + ) ' test_expect_failure 'detect rename/rename/add-source for virtual merge-base' ' - git checkout D^0 && - - git merge -s recursive E^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:c) = $(git rev-parse A:a) && - test "$(cat a)" = "$(printf "1\n2\n3\n4\n5\n6\n7\n8\n")" + ( + cd rename-rename-add-source && + + git checkout D^0 && + + git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + printf "1\n2\n3\n4\n5\n6\n7\n8\n" >correct && + git rev-parse >expect \ + A:a A:a \ + correct && + git rev-parse >actual \ + :0:b :0:c && + git hash-object >>actual \ + a && + test_cmp expect actual + ) ' # @@ -638,52 +747,62 @@ test_expect_failure 'detect rename/rename/add-source for virtual merge-base' ' # base of B & C needs to not delete B:c for that to work, though... test_expect_success 'setup criss-cross+rename/rename/add-dest + simple modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - printf "1\n2\n3\n4\n5\n6\n7\n" >c && - git add c && - git commit -m B && - - git checkout -b C A && - git mv a c && - git commit -m C && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git mv b a && - git commit -m "D is like B but renames b back to a" && - git tag D && - - git checkout B^0 && - git merge --no-commit -s ours C^0 && - git mv b a && - echo 8 >>c && - git add c && - git commit -m "E like D but has mod in c" && - git tag E + test_create_repo rename-rename-add-dest && + ( + cd rename-rename-add-dest && + + >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + printf "1\n2\n3\n4\n5\n6\n7\n" >c && + git add c && + git commit -m B && + + git checkout -b C A && + git mv a c && + git commit -m C && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git mv b a && + git commit -m "D is like B but renames b back to a" && + git tag D && + + git checkout B^0 && + git merge --no-commit -s ours C^0 && + git mv b a && + echo 8 >>c && + git add c && + git commit -m "E like D but has mod in c" && + git tag E + ) ' test_expect_success 'virtual merge base handles rename/rename(1to2)/add-dest' ' - git checkout D^0 && - - git merge -s recursive E^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:a) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:c) = $(git rev-parse E:c) + ( + cd rename-rename-add-dest && + + git checkout D^0 && + + git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + A:a E:c && + git rev-parse >actual \ + :0:a :0:c && + test_cmp expect actual + ) ' test_done diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index 411550d..1cbd946 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -6,31 +6,40 @@ test_description="recursive merge corner cases w/ renames but not criss-crosses" . ./test-lib.sh test_expect_success 'setup rename/delete + untracked file' ' - echo "A pretty inscription" >ring && - git add ring && - test_tick && - git commit -m beginning && - - git branch people && - git checkout -b rename-the-ring && - git mv ring one-ring-to-rule-them-all && - test_tick && - git commit -m fullname && - - git checkout people && - git rm ring && - echo gollum >owner && - git add owner && - test_tick && - git commit -m track-people-instead-of-objects && - echo "Myyy PRECIOUSSS" >ring + test_create_repo rename-delete-untracked && + ( + cd rename-delete-untracked && + + echo "A pretty inscription" >ring && + git add ring && + test_tick && + git commit -m beginning && + + git branch people && + git checkout -b rename-the-ring && + git mv ring one-ring-to-rule-them-all && + test_tick && + git commit -m fullname && + + git checkout people && + git rm ring && + echo gollum >owner && + git add owner && + test_tick && + git commit -m track-people-instead-of-objects && + echo "Myyy PRECIOUSSS" >ring + ) ' test_expect_success "Does git preserve Gollum's precious artifact?" ' - test_must_fail git merge -s recursive rename-the-ring && + ( + cd rename-delete-untracked && - # Make sure git did not delete an untracked file - test -f ring + test_must_fail git merge -s recursive rename-the-ring && + + # Make sure git did not delete an untracked file + test_path_is_file ring + ) ' # Testcase setup for rename/modify/add-source: @@ -41,96 +50,125 @@ test_expect_success "Does git preserve Gollum's precious artifact?" ' # We should be able to merge B & C cleanly test_expect_success 'setup rename/modify/add-source conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - echo 8 >>a && - git add a && - git commit -m B && - - git checkout -b C A && - git mv a b && - echo something completely different >a && - git add a && - git commit -m C + test_create_repo rename-modify-add-source && + ( + cd rename-modify-add-source && + + printf "1\n2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + echo 8 >>a && + git add a && + git commit -m B && + + git checkout -b C A && + git mv a b && + echo something completely different >a && + git add a && + git commit -m C + ) ' test_expect_failure 'rename/modify/add-source conflict resolvable' ' - git checkout B^0 && + ( + cd rename-modify-add-source && + + git checkout B^0 && - git merge -s recursive C^0 && + git merge -s recursive C^0 && - test $(git rev-parse B:a) = $(git rev-parse b) && - test $(git rev-parse C:a) = $(git rev-parse a) + git rev-parse >expect \ + B:a C:a && + git rev-parse >actual \ + b c && + test_cmp expect actual + ) ' test_expect_success 'setup resolvable conflict missed if rename missed' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - echo foo >b && - git add a b && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a c && - echo "Completely different content" >a && - git add a && - git commit -m B && - - git checkout -b C A && - echo 6 >>a && - git add a && - git commit -m C + test_create_repo break-detection-1 && + ( + cd break-detection-1 && + + printf "1\n2\n3\n4\n5\n" >a && + echo foo >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a c && + echo "Completely different content" >a && + git add a && + git commit -m B && + + git checkout -b C A && + echo 6 >>a && + git add a && + git commit -m C + ) ' test_expect_failure 'conflict caused if rename not detected' ' - git checkout -q C^0 && - git merge -s recursive B^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test_line_count = 6 c && - test $(git rev-parse HEAD:a) = $(git rev-parse B:a) && - test $(git rev-parse HEAD:b) = $(git rev-parse A:b) + ( + cd break-detection-1 && + + git checkout -q C^0 && + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_line_count = 6 c && + git rev-parse >expect \ + B:a A:b && + git rev-parse >actual \ + :0:a :0:b && + test_cmp expect actual + ) ' test_expect_success 'setup conflict resolved wrong if rename missed' ' - git reset --hard && - git clean -f && - - git checkout -b D A && - echo 7 >>a && - git add a && - git mv a c && - echo "Completely different content" >a && - git add a && - git commit -m D && - - git checkout -b E A && - git rm a && - echo "Completely different content" >>a && - git add a && - git commit -m E + test_create_repo break-detection-2 && + ( + cd break-detection-2 && + + printf "1\n2\n3\n4\n5\n" >a && + echo foo >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b D A && + echo 7 >>a && + git add a && + git mv a c && + echo "Completely different content" >a && + git add a && + git commit -m D && + + git checkout -b E A && + git rm a && + echo "Completely different content" >>a && + git add a && + git commit -m E + ) ' test_expect_failure 'missed conflict if rename not detected' ' - git checkout -q E^0 && - test_must_fail git merge -s recursive D^0 + ( + cd break-detection-2 && + + git checkout -q E^0 && + test_must_fail git merge -s recursive D^0 + ) ' # Tests for undetected rename/add-source causing a file to erroneously be @@ -145,198 +183,233 @@ test_expect_failure 'missed conflict if rename not detected' ' # Commit C: rename a->b, add unrelated a test_expect_success 'setup undetected rename/add-source causes data loss' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a b && - echo foobar >a && - git add a && - git commit -m C + test_create_repo break-detection-3 && + ( + cd break-detection-3 && + + printf "1\n2\n3\n4\n5\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a b && + echo foobar >a && + git add a && + git commit -m C + ) ' test_expect_failure 'detect rename/add-source and preserve all data' ' - git checkout B^0 && + ( + cd break-detection-3 && - git merge -s recursive C^0 && + git checkout B^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git merge -s recursive C^0 && - test -f a && - test -f b && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) + test_path_is_file a && + test_path_is_file b && + + git rev-parse >expect \ + A:a C:a && + git rev-parse >actual \ + :0:b :0:a && + test_cmp expect actual + ) ' test_expect_failure 'detect rename/add-source and preserve all data, merge other way' ' - git checkout C^0 && + ( + cd break-detection-3 && + + git checkout C^0 && - git merge -s recursive B^0 && + git merge -s recursive B^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && - test -f a && - test -f b && + test_path_is_file a && + test_path_is_file b && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) && - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) + git rev-parse >expect \ + A:a C:a && + git rev-parse >actual \ + :0:b :0:a && + test_cmp expect actual + ) ' test_expect_success 'setup content merge + rename/directory conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n" >file && - git add file && - test_tick && - git commit -m base && - git tag base && - - git checkout -b right && - echo 7 >>file && - mkdir newfile && - echo junk >newfile/realfile && - git add file newfile/realfile && - test_tick && - git commit -m right && - - git checkout -b left-conflict base && - echo 8 >>file && - git add file && - git mv file newfile && - test_tick && - git commit -m left && - - git checkout -b left-clean base && - echo 0 >newfile && - cat file >>newfile && - git add newfile && - git rm file && - test_tick && - git commit -m left + test_create_repo rename-directory-1 && + ( + cd rename-directory-1 && + + printf "1\n2\n3\n4\n5\n6\n" >file && + git add file && + test_tick && + git commit -m base && + git tag base && + + git checkout -b right && + echo 7 >>file && + mkdir newfile && + echo junk >newfile/realfile && + git add file newfile/realfile && + test_tick && + git commit -m right && + + git checkout -b left-conflict base && + echo 8 >>file && + git add file && + git mv file newfile && + test_tick && + git commit -m left && + + git checkout -b left-clean base && + echo 0 >newfile && + cat file >>newfile && + git add newfile && + git rm file && + test_tick && + git commit -m left + ) ' test_expect_success 'rename/directory conflict + clean content merge' ' - git reset --hard && - git reset --hard && - git clean -fdqx && + ( + cd rename-directory-1 && - git checkout left-clean^0 && + git checkout left-clean^0 && - test_must_fail git merge -s recursive right^0 && + test_must_fail git merge -s recursive right^0 && - test 2 -eq $(git ls-files -s | wc -l) && - test 1 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && - echo 0 >expect && - git cat-file -p base:file >>expect && - echo 7 >>expect && - test_cmp expect newfile~HEAD && + echo 0 >expect && + git cat-file -p base:file >>expect && + echo 7 >>expect && + test_cmp expect newfile~HEAD && - test $(git rev-parse :2:newfile) = $(git hash-object expect) && + test $(git rev-parse :2:newfile) = $(git hash-object expect) && - test -f newfile/realfile && - test -f newfile~HEAD + test_path_is_file newfile/realfile && + test_path_is_file newfile~HEAD + ) ' test_expect_success 'rename/directory conflict + content merge conflict' ' - git reset --hard && - git reset --hard && - git clean -fdqx && - - git checkout left-conflict^0 && - - test_must_fail git merge -s recursive right^0 && - - test 4 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 1 -eq $(git ls-files -o | wc -l) && - - git cat-file -p left-conflict:newfile >left && - git cat-file -p base:file >base && - git cat-file -p right:file >right && - test_must_fail git merge-file \ - -L "HEAD:newfile" \ - -L "" \ - -L "right^0:file" \ - left base right && - test_cmp left newfile~HEAD && - - test $(git rev-parse :1:newfile) = $(git rev-parse base:file) && - test $(git rev-parse :2:newfile) = $(git rev-parse left-conflict:newfile) && - test $(git rev-parse :3:newfile) = $(git rev-parse right:file) && - - test -f newfile/realfile && - test -f newfile~HEAD + ( + cd rename-directory-1 && + + git reset --hard && + git reset --hard && + git clean -fdqx && + + git checkout left-conflict^0 && + + test_must_fail git merge -s recursive right^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 2 out && + + git cat-file -p left-conflict:newfile >left && + git cat-file -p base:file >base && + git cat-file -p right:file >right && + test_must_fail git merge-file \ + -L "HEAD:newfile" \ + -L "" \ + -L "right^0:file" \ + left base right && + test_cmp left newfile~HEAD && + + git rev-parse >expect \ + base:file left-conflict:newfile right:file && + git rev-parse >actual \ + :1:newfile :2:newfile :3:newfile && + test_cmp expect actual + + test_path_is_file newfile/realfile && + test_path_is_file newfile~HEAD + ) ' test_expect_success 'setup content merge + rename/directory conflict w/ disappearing dir' ' - git reset --hard && - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - mkdir sub && - printf "1\n2\n3\n4\n5\n6\n" >sub/file && - git add sub/file && - test_tick && - git commit -m base && - git tag base && - - git checkout -b right && - echo 7 >>sub/file && - git add sub/file && - test_tick && - git commit -m right && - - git checkout -b left base && - echo 0 >newfile && - cat sub/file >>newfile && - git rm sub/file && - mv newfile sub && - git add sub && - test_tick && - git commit -m left + test_create_repo rename-directory-2 && + ( + cd rename-directory-2 && + + mkdir sub && + printf "1\n2\n3\n4\n5\n6\n" >sub/file && + git add sub/file && + test_tick && + git commit -m base && + git tag base && + + git checkout -b right && + echo 7 >>sub/file && + git add sub/file && + test_tick && + git commit -m right && + + git checkout -b left base && + echo 0 >newfile && + cat sub/file >>newfile && + git rm sub/file && + mv newfile sub && + git add sub && + test_tick && + git commit -m left + ) ' test_expect_success 'disappearing dir in rename/directory conflict handled' ' - git reset --hard && - git clean -fdqx && + ( + cd rename-directory-2 && - git checkout left^0 && + git checkout left^0 && - git merge -s recursive right^0 && + git merge -s recursive right^0 && - test 1 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && - echo 0 >expect && - git cat-file -p base:sub/file >>expect && - echo 7 >>expect && - test_cmp expect sub && + echo 0 >expect && + git cat-file -p base:sub/file >>expect && + echo 7 >>expect && + test_cmp expect sub && - test -f sub + test_path_is_file sub + ) ' # Test for all kinds of things that can go wrong with rename/rename (2to1): @@ -352,48 +425,59 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' # * Nothing else should be present. Is anything? test_expect_success 'setup rename/rename (2to1) + modify/modify' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n" >a && - printf "5\n4\n3\n2\n1\n" >b && - git add a b && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a c && - echo 0 >>b && - git add b && - git commit -m B && - - git checkout -b C A && - git mv b c && - echo 6 >>a && - git add a && - git commit -m C + test_create_repo rename-rename-2to1 && + ( + cd rename-rename-2to1 && + + printf "1\n2\n3\n4\n5\n" >a && + printf "5\n4\n3\n2\n1\n" >b && + git add a b && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a c && + echo 0 >>b && + git add b && + git commit -m B && + + git checkout -b C A && + git mv b c && + echo 6 >>a && + git add a && + git commit -m C + ) ' test_expect_success 'handle rename/rename (2to1) conflict correctly' ' - git checkout B^0 && - - test_must_fail git merge -s recursive C^0 >out && - test_i18ngrep "CONFLICT (rename/rename)" out && - - test 2 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u | wc -l) && - test 2 -eq $(git ls-files -u c | wc -l) && - test 3 -eq $(git ls-files -o | wc -l) && - - test ! -f a && - test ! -f b && - test -f c~HEAD && - test -f c~C^0 && - - test $(git hash-object c~HEAD) = $(git rev-parse C:a) && - test $(git hash-object c~C^0) = $(git rev-parse B:b) + ( + cd rename-rename-2to1 && + + git checkout B^0 && + + test_must_fail git merge -s recursive C^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -u c >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + test_path_is_missing a && + test_path_is_missing b && + test_path_is_file c~HEAD && + test_path_is_file c~C^0 && + + git rev-parse >expect \ + C:a B:b && + git hash-object >actual \ + c~HEAD c~C^0 && + test_cmp expect actual + ) ' # Testcase setup for simple rename/rename (1to2) conflict: @@ -401,44 +485,53 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' # Commit B: rename a->b # Commit C: rename a->c test_expect_success 'setup simple rename/rename (1to2) conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo stuff >a && - git add a && - test_tick && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - test_tick && - git commit -m B && - - git checkout -b C A && - git mv a c && - test_tick && - git commit -m C + test_create_repo rename-rename-1to2 && + ( + cd rename-rename-1to2 && + + echo stuff >a && + git add a && + test_tick && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + test_tick && + git commit -m B && + + git checkout -b C A && + git mv a c && + test_tick && + git commit -m C + ) ' test_expect_success 'merge has correct working tree contents' ' - git checkout C^0 && - - test_must_fail git merge -s recursive B^0 && - - test 3 -eq $(git ls-files -s | wc -l) && - test 3 -eq $(git ls-files -u | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :1:a) = $(git rev-parse A:a) && - test $(git rev-parse :3:b) = $(git rev-parse A:a) && - test $(git rev-parse :2:c) = $(git rev-parse A:a) && - - test ! -f a && - test $(git hash-object b) = $(git rev-parse A:a) && - test $(git hash-object c) = $(git rev-parse A:a) + ( + cd rename-rename-1to2 && + + git checkout C^0 && + + test_must_fail git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + git rev-parse >expect \ + A:a A:a A:a \ + A:a A:a && + git rev-parse >actual \ + :1:a :3:b :2:c && + git hash-object >>actual \ + b c && + test_cmp expect actual + ) ' # Testcase setup for rename/rename(1to2)/add-source conflict: @@ -449,130 +542,155 @@ test_expect_success 'merge has correct working tree contents' ' # Merging of B & C should NOT be clean; there's a rename/rename conflict test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - printf "1\n2\n3\n4\n5\n6\n7\n" >a && - git add a && - git commit -m A && - git tag A && - - git checkout -b B A && - git mv a b && - git commit -m B && - - git checkout -b C A && - git mv a c && - echo something completely different >a && - git add a && - git commit -m C + test_create_repo rename-rename-1to2-add-source-1 && + ( + cd rename-rename-1to2-add-source-1 && + + printf "1\n2\n3\n4\n5\n6\n7\n" >a && + git add a && + git commit -m A && + git tag A && + + git checkout -b B A && + git mv a b && + git commit -m B && + + git checkout -b C A && + git mv a c && + echo something completely different >a && + git add a && + git commit -m C + ) ' test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ' - git checkout B^0 && + ( + cd rename-rename-1to2-add-source-1 && + + git checkout B^0 && - test_must_fail git merge -s recursive C^0 && + test_must_fail git merge -s recursive C^0 && - test 4 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -o >out && + test_line_count = 1 out && - test $(git rev-parse 3:a) = $(git rev-parse C:a) && - test $(git rev-parse 1:a) = $(git rev-parse A:a) && - test $(git rev-parse 2:b) = $(git rev-parse B:b) && - test $(git rev-parse 3:c) = $(git rev-parse C:c) && + git rev-parse >expect \ + C:a A:a B:b C:C && + git rev-parse >actual \ + :3:a :1:a :2:b :3:c && + test_cmp expect actual - test -f a && - test -f b && - test -f c + test_path_is_file a && + test_path_is_file b && + test_path_is_file c + ) ' test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - >a && - git add a && - test_tick && - git commit -m base && - git tag A && - - git checkout -b B A && - git mv a b && - test_tick && - git commit -m one && - - git checkout -b C A && - git mv a b && - echo important-info >a && - git add a && - test_tick && - git commit -m two + test_create_repo rename-rename-1to2-add-source-2 && + ( + cd rename-rename-1to2-add-source-2 && + + >a && + git add a && + test_tick && + git commit -m base && + git tag A && + + git checkout -b B A && + git mv a b && + test_tick && + git commit -m one && + + git checkout -b C A && + git mv a b && + echo important-info >a && + git add a && + test_tick && + git commit -m two + ) ' test_expect_failure 'rename/rename/add-source still tracks new a file' ' - git checkout C^0 && - git merge -s recursive B^0 && - - test 2 -eq $(git ls-files -s | wc -l) && - test 0 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse HEAD:a) = $(git rev-parse C:a) && - test $(git rev-parse HEAD:b) = $(git rev-parse A:a) + ( + cd rename-rename-1to2-add-source-2 && + + git checkout C^0 && + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >expect \ + C:a A:a && + git rev-parse >actual \ + :0:a :0:b && + test_cmp expect actual + ) ' test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' - git rm -rf . && - git clean -fdqx && - rm -rf .git && - git init && - - echo stuff >a && - git add a && - test_tick && - git commit -m base && - git tag A && - - git checkout -b B A && - git mv a b && - echo precious-data >c && - git add c && - test_tick && - git commit -m one && - - git checkout -b C A && - git mv a c && - echo important-info >b && - git add b && - test_tick && - git commit -m two + test_create_repo rename-rename-1to2-add-dest && + ( + cd rename-rename-1to2-add-dest && + + echo stuff >a && + git add a && + test_tick && + git commit -m base && + git tag A && + + git checkout -b B A && + git mv a b && + echo precious-data >c && + git add c && + test_tick && + git commit -m one && + + git checkout -b C A && + git mv a c && + echo important-info >b && + git add b && + test_tick && + git commit -m two + ) ' test_expect_success 'rename/rename/add-dest merge still knows about conflicting file versions' ' - git checkout C^0 && - test_must_fail git merge -s recursive B^0 && - - test 5 -eq $(git ls-files -s | wc -l) && - test 2 -eq $(git ls-files -u b | wc -l) && - test 2 -eq $(git ls-files -u c | wc -l) && - test 4 -eq $(git ls-files -o | wc -l) && - - test $(git rev-parse :1:a) = $(git rev-parse A:a) && - test $(git rev-parse :2:b) = $(git rev-parse C:b) && - test $(git rev-parse :3:b) = $(git rev-parse B:b) && - test $(git rev-parse :2:c) = $(git rev-parse C:c) && - test $(git rev-parse :3:c) = $(git rev-parse B:c) && - - test $(git hash-object c~HEAD) = $(git rev-parse C:c) && - test $(git hash-object c~B\^0) = $(git rev-parse B:c) && - test $(git hash-object b~HEAD) = $(git rev-parse C:b) && - test $(git hash-object b~B\^0) = $(git rev-parse B:b) && - - test ! -f b && - test ! -f c + ( + cd rename-rename-1to2-add-dest && + + git checkout C^0 && + test_must_fail git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -u c >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >expect \ + A:a C:b B:b C:c B:c && + git rev-parse >actual \ + :1:a :2:b :3:b :2:c :3:c && + test_cmp expect actual + + git rev-parse >expect \ + C:c B:c C:b B:b && + git hash-object >actual \ + c~HEAD c~B\^0 b~HEAD b~B\^0 && + test_cmp expect actual + + test_path_is_missing b && + test_path_is_missing c + ) ' test_done diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh new file mode 100755 index 0000000..2e28f29 --- /dev/null +++ b/t/t6043-merge-rename-directories.sh @@ -0,0 +1,3998 @@ +#!/bin/sh + +test_description="recursive merge with directory renames" +# includes checking of many corner cases, with a similar methodology to: +# t6042: corner cases with renames but not criss-cross merges +# t6036: corner cases with both renames and criss-cross merges +# +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Basic cases we should be able to handle +########################################################################### + +# Testcase 1a, Basic directory rename. +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e/f} +# Expected: y/{b,c,d,e/f} + +test_expect_success '1a-setup: Simple directory rename detection' ' + test_create_repo 1a && + ( + cd 1a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + mkdir z/e && + echo f >z/e/f && + git add z/d z/e/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check: Simple directory rename detection' ' + ( + cd 1a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e/f && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/e/f && + test_cmp expect actual && + + git hash-object y/d >actual && + git rev-parse B:z/d >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:z/d && + test_must_fail git rev-parse HEAD:z/e/f && + test_path_is_missing z/d && + test_path_is_missing z/e/f + ) +' + +# Testcase 1b, Merge a directory with another +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e}, y/d +# Commit B: y/{b,c,d} +# Expected: y/{b,c,d,e} + +test_expect_success '1b-setup: Merge a directory with another' ' + test_create_repo 1b && + ( + cd 1b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y && + git mv z/c y && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1b-check: Merge a directory with another' ' + ( + cd 1b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:z/e && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/e + ) +' + +# Testcase 1c, Transitive renaming +# (Related to testcases 3a and 6d -- when should a transitive rename apply?) +# (Related to testcases 9c and 9d -- can transitivity repeat?) +# (Related to testcase 12b -- joint-transitivity?) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c,d} (because x/d -> z/d -> y/d) + +test_expect_success '1c-setup: Transitive renaming' ' + test_create_repo 1c && + ( + cd 1c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1c-check: Transitive renaming' ' + ( + cd 1c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d + ) +' + +# Testcase 1d, Directory renames (merging two directories into one new one) +# cause a rename/rename(2to1) conflict +# (Related to testcases 1c and 7b) +# Commit O. z/{b,c}, y/{d,e} +# Commit A. x/{b,c}, y/{d,e,m,wham_1} +# Commit B. z/{b,c,n,wham_2}, x/{d,e} +# Expected: x/{b,c,d,e,m,n}, CONFLICT:(y/wham_1 & z/wham_2 -> x/wham) +# Note: y/m & z/n should definitely move into x. By the same token, both +# y/wham_1 & z/wham_2 should too...giving us a conflict. + +test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) conflict' ' + test_create_repo 1d && + ( + cd 1d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + echo e >y/e && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z x && + echo m >y/m && + echo wham1 >y/wham && + git add y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y x && + echo n >z/n && + echo wham2 >z/wham && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) conflict' ' + ( + cd 1d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 8 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:x/b :0:x/c :0:x/d :0:x/e :0:x/m :0:x/n && + git rev-parse >expect \ + O:z/b O:z/c O:y/d O:y/e A:y/m B:z/n && + test_cmp expect actual && + + test_must_fail git rev-parse :0:x/wham && + git rev-parse >actual \ + :2:x/wham :3:x/wham && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual && + + test_path_is_missing x/wham && + test_path_is_file x/wham~HEAD && + test_path_is_file x/wham~B^0 && + + git hash-object >actual \ + x/wham~HEAD x/wham~B^0 && + git rev-parse >expect \ + A:y/wham B:z/wham && + test_cmp expect actual + ) +' + +# Testcase 1e, Renamed directory, with all filenames being renamed too +# (Related to testcases 9f & 9g) +# Commit O: z/{oldb,oldc} +# Commit A: y/{newb,newc} +# Commit B: z/{oldb,oldc,d} +# Expected: y/{newb,newc,d} + +test_expect_success '1e-setup: Renamed directory, with all files being renamed too' ' + test_create_repo 1e && + ( + cd 1e && + + mkdir z && + echo b >z/oldb && + echo c >z/oldc && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/oldb y/newb && + git mv z/oldc y/newc && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1e-check: Renamed directory, with all files being renamed too' ' + ( + cd 1e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/newb HEAD:y/newc HEAD:y/d && + git rev-parse >expect \ + O:z/oldb O:z/oldc B:z/d && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:z/d + ) +' + +# Testcase 1f, Split a directory into two other directories +# (Related to testcases 3a, all of section 2, and all of section 4) +# Commit O: z/{b,c,d,e,f} +# Commit A: z/{b,c,d,e,f,g} +# Commit B: y/{b,c}, x/{d,e,f} +# Expected: y/{b,c}, x/{d,e,f,g} + +test_expect_success '1f-setup: Split a directory into two other directories' ' + test_create_repo 1f && + ( + cd 1f && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + echo f >z/f && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo g >z/g && + git add z/g && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + git mv z/e x/ && + git mv z/f x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1f-check: Split a directory into two other directories' ' + ( + cd 1f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d HEAD:x/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e O:z/f A:z/g && + test_cmp expect actual && + test_path_is_missing z/g && + test_must_fail git rev-parse HEAD:z/g + ) +' + +########################################################################### +# Rules suggested by testcases in section 1: +# +# We should still detect the directory rename even if it wasn't just +# the directory renamed, but the files within it. (see 1b) +# +# If renames split a directory into two or more others, the directory +# with the most renames, "wins" (see 1c). However, see the testcases +# in section 2, plus testcases 3a and 4a. +########################################################################### + + +########################################################################### +# SECTION 2: Split into multiple directories, with equal number of paths +# +# Explore the splitting-a-directory rules a bit; what happens in the +# edge cases? +# +# Note that there is a closely related case of a directory not being +# split on either side of history, but being renamed differently on +# each side. See testcase 8e for that. +########################################################################### + +# Testcase 2a, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c,d} +# Expected: y/b, w/c, z/d, with warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2a-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2a && + ( + cd 2a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*directory rename split" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 2b, Directory split into two on one side, with equal numbers of paths +# Commit O: z/{b,c} +# Commit A: y/b, w/c +# Commit B: z/{b,c}, x/d +# Expected: y/b, w/c, x/d; No warning about z/ -> (y/ vs. w/) conflict +test_expect_success '2b-setup: Directory split into two on one side, with equal numbers of paths' ' + test_create_repo 2b && + ( + cd 2b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir w && + git mv z/b y/ && + git mv z/c w/ && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir x && + echo d >x/d && + git add x/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check: Directory split into two on one side, with equal numbers of paths' ' + ( + cd 2b && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:w/c :0:x/d && + git rev-parse >expect \ + O:z/b O:z/c B:x/d && + test_cmp expect actual && + test_i18ngrep ! "CONFLICT.*directory rename split" out + ) +' + +########################################################################### +# Rules suggested by section 2: +# +# None; the rule was already covered in section 1. These testcases are +# here just to make sure the conflict resolution and necessary warning +# messages are handled correctly. +########################################################################### + + +########################################################################### +# SECTION 3: Path in question is the source path for some rename already +# +# Combining cases from Section 1 and trying to handle them could lead to +# directory renaming detection being over-applied. So, this section +# provides some good testcases to check that the implementation doesn't go +# too far. +########################################################################### + +# Testcase 3a, Avoid implicit rename if involved as source on other side +# (Related to testcases 1c, 1f, and 9h) +# Commit O: z/{b,c,d} +# Commit A: z/{b,c,d} (no change) +# Commit B: y/{b,c}, x/d +# Expected: y/{b,c}, x/d +test_expect_success '3a-setup: Avoid implicit rename if involved as source on other side' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check: Avoid implicit rename if involved as source on other side' ' + ( + cd 3a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d && + test_cmp expect actual + ) +' + +# Testcase 3b, Avoid implicit rename if involved as source on other side +# (Related to testcases 5c and 7c, also kind of 1e and 1f) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c}, x/d +# Commit B: z/{b,c}, w/d +# Expected: y/{b,c}, CONFLICT:(z/d -> x/d vs. w/d) +# NOTE: We're particularly checking that since z/d is already involved as +# a source in a file rename on the same side of history, that we don't +# get it involved in directory rename detection. If it were, we might +# end up with CONFLICT:(z/d -> y/d vs. x/d vs. w/d), i.e. a +# rename/rename/rename(1to3) conflict, which is just weird. +test_expect_success '3b-setup: Avoid implicit rename if involved as source on current side' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + git mv z/d w/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check: Avoid implicit rename if involved as source on current side' ' + ( + cd 3b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep CONFLICT.*rename/rename.*z/d.*x/d.*w/d out && + test_i18ngrep ! CONFLICT.*rename/rename.*y/d out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:z/d :2:x/d :3:w/d && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/d O:z/d && + test_cmp expect actual && + + test_path_is_missing z/d && + git hash-object >actual \ + x/d w/d && + git rev-parse >expect \ + O:z/d O:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 3: +# +# Avoid directory-rename-detection for a path, if that path is the source +# of a rename on either side of a merge. +########################################################################### + + +########################################################################### +# SECTION 4: Partially renamed directory; still exists on both sides of merge +# +# What if we were to attempt to do directory rename detection when someone +# "mostly" moved a directory but still left some files around, or, +# equivalently, fully renamed a directory in one commmit and then recreated +# that directory in a later commit adding some new files and then tried to +# merge? +# +# It's hard to divine user intent in these cases, because you can make an +# argument that, depending on the intermediate history of the side being +# merged, that some users will want files in that directory to +# automatically be detected and renamed, while users with a different +# intermediate history wouldn't want that rename to happen. +# +# I think that it is best to simply not have directory rename detection +# apply to such cases. My reasoning for this is four-fold: (1) it's +# easiest for users in general to figure out what happened if we don't +# apply directory rename detection in any such case, (2) it's an easy rule +# to explain ["We don't do directory rename detection if the directory +# still exists on both sides of the merge"], (3) we can get some hairy +# edge/corner cases that would be really confusing and possibly not even +# representable in the index if we were to even try, and [related to 3] (4) +# attempting to resolve this issue of divining user intent by examining +# intermediate history goes against the spirit of three-way merges and is a +# path towards crazy corner cases that are far more complex than what we're +# already dealing with. +# +# Note that the wording of the rule ("We don't do directory rename +# detection if the directory still exists on both sides of the merge.") +# also excludes "renaming" of a directory into a subdirectory of itself +# (e.g. /some/dir/* -> /some/dir/subdir/*). It may be possible to carve +# out an exception for "renaming"-beneath-itself cases without opening +# weird edge/corner cases for other partial directory renames, but for now +# we are keeping the rule simple. +# +# This section contains a test for a partially-renamed-directory case. +########################################################################### + +# Testcase 4a, Directory split, with original directory still present +# (Related to testcase 1f) +# Commit O: z/{b,c,d,e} +# Commit A: y/{b,c,d}, z/e +# Commit B: z/{b,c,d,e,f} +# Expected: y/{b,c,d}, z/{e,f} +# NOTE: Even though most files from z moved to y, we don't want f to follow. + +test_expect_success '4a-setup: Directory split, with original directory still present' ' + test_create_repo 4a && + ( + cd 4a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + echo e >z/e && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo f >z/f && + git add z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4a-check: Directory split, with original directory still present' ' + ( + cd 4a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/e HEAD:z/f && + git rev-parse >expect \ + O:z/b O:z/c O:z/d O:z/e B:z/f && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 4: +# +# Directory-rename-detection should be turned off for any directories (as +# a source for renames) that exist on both sides of the merge. (The "as +# a source for renames" clarification is due to cases like 1c where +# the target directory exists on both sides and we do want the rename +# detection.) But, sadly, see testcase 8b. +########################################################################### + + +########################################################################### +# SECTION 5: Files/directories in the way of subset of to-be-renamed paths +# +# Implicitly renaming files due to a detected directory rename could run +# into problems if there are files or directories in the way of the paths +# we want to rename. Explore such cases in this section. +########################################################################### + +# Testcase 5a, Merge directories, other side adds files to original and target +# Commit O: z/{b,c}, y/d +# Commit A: z/{b,c,e_1,f}, y/{d,e_2} +# Commit B: y/{b,c,d} +# Expected: z/e_1, y/{b,c,d,e_2,f} + CONFLICT warning +# NOTE: While directory rename detection is active here causing z/f to +# become y/f, we did not apply this for z/e_1 because that would +# give us an add/add conflict for y/e_1 vs y/e_2. This problem with +# this add/add, is that both versions of y/e are from the same side +# of history, giving us no way to represent this conflict in the +# index. + +test_expect_success '5a-setup: Merge directories, other side adds files to original and target' ' + test_create_repo 5a && + ( + cd 5a && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir y && + echo d >y/d && + git add z y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >z/e && + echo f >z/f && + echo e2 >y/e && + git add z/e z/f y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/b y/ && + git mv z/c y/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5a-check: Merge directories, other side adds files to original and target' ' + ( + cd 5a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT.*implicit dir rename" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/d :0:y/e :0:z/e :0:y/f && + git rev-parse >expect \ + O:z/b O:z/c O:y/d A:y/e A:z/e A:z/f && + test_cmp expect actual + ) +' + +# Testcase 5b, Rename/delete in order to get add/add/add conflict +# (Related to testcase 8d; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d_1} +# Commit A: y/{b,c,d_2} +# Commit B: z/{b,c,d_1,e}, y/d_3 +# Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3) +# NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as +# we normaly would since z/ is being renamed to y/, then this would be +# a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add +# conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not +# representable in the index, so the existence of y/d_3 needs to +# cause us to bail on directory rename detection for that path, falling +# back to git behavior without the directory rename detection. + +test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflict' ' + test_create_repo 5b && + ( + cd 5b && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d1 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + echo d2 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + echo d3 >y/d && + echo e >z/e && + git add y/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5b-check: Rename/delete in order to get add/add/add conflict' ' + ( + cd 5b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e A:y/d B:y/d && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + test_path_is_file y/d + ) +' + +# Testcase 5c, Transitive rename would cause rename/rename/rename/add/add/add +# (Directory rename detection would result in transitive rename vs. +# rename/rename(1to2) and turn it into a rename/rename(1to3). Further, +# rename paths conflict with separate adds on the other side) +# (Related to testcases 3b and 7c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d_2}, w/d_1 +# Commit B: z/{b,c,d_1,e}, w/d_3, y/d_4 +# Expected: A mess, but only a rename/rename(1to2)/add/add mess. Use the +# presence of y/d_4 in B to avoid doing transitive rename of +# x/d_1 -> z/d_1 -> y/d_1, so that the only paths we have at +# y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e, +# though, because it doesn't have anything in the way. + +test_expect_success '5c-setup: Transitive rename would cause rename/rename/rename/add/add/add' ' + test_create_repo 5c && + ( + cd 5c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d2 >y/d && + git add y/d && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + mkdir w && + mkdir y && + echo d3 >w/d && + echo d4 >y/d && + echo e >z/e && + git add w/ y/ z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5c-check: Transitive rename would cause rename/rename/rename/add/add/add' ' + ( + cd 5c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out && + test_i18ngrep "CONFLICT (add/add).* y/d" out && + + git ls-files -s >out && + test_line_count = 9 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/d && + git rev-parse >actual \ + :2:w/d :3:w/d :1:x/d :2:y/d :3:y/d :3:z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d A:y/d B:y/d O:x/d && + test_cmp expect actual && + + git hash-object >actual \ + w/d~HEAD w/d~B^0 z/d && + git rev-parse >expect \ + O:x/d B:w/d O:x/d && + test_cmp expect actual && + test_path_is_missing x/d && + test_path_is_file y/d && + grep -q "<<<<" y/d # conflict markers should be present + ) +' + +# Testcase 5d, Directory/file/file conflict due to directory rename +# Commit O: z/{b,c} +# Commit A: y/{b,c,d_1} +# Commit B: z/{b,c,d_2,f}, y/d/e +# Expected: y/{b,c,d/e,f}, z/d_2, CONFLICT(file/directory), y/d_1~HEAD +# Note: The fact that y/d/ exists in B makes us bail on directory rename +# detection for z/d_2, but that doesn't prevent us from applying the +# directory rename detection for z/f -> y/f. + +test_expect_success '5d-setup: Directory/file/file conflict due to directory rename' ' + test_create_repo 5d && + ( + cd 5d && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo d1 >y/d && + git add y/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir -p y/d && + echo e >y/d/e && + echo d2 >z/d && + echo f >z/f && + git add y/d/e z/d z/f && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '5d-check: Directory/file/file conflict due to directory rename' ' + ( + cd 5d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (file/directory).*y/d" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:z/d :0:y/f :2:y/d :0:y/d/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/d B:z/f A:y/d B:y/d/e && + test_cmp expect actual && + + git hash-object y/d~HEAD >actual && + git rev-parse A:y/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 5: +# +# If a subset of to-be-renamed files have a file or directory in the way, +# "turn off" the directory rename for those specific sub-paths, falling +# back to old handling. But, sadly, see testcases 8a and 8b. +########################################################################### + + +########################################################################### +# SECTION 6: Same side of the merge was the one that did the rename +# +# It may sound obvious that you only want to apply implicit directory +# renames to directories if the _other_ side of history did the renaming. +# If you did make an implementation that didn't explicitly enforce this +# rule, the majority of cases that would fall under this section would +# also be solved by following the rules from the above sections. But +# there are still a few that stick out, so this section covers them just +# to make sure we also get them right. +########################################################################### + +# Testcase 6a, Tricky rename/delete +# Commit O: z/{b,c,d} +# Commit A: z/b +# Commit B: y/{b,c}, z/d +# Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL) +# Note: We're just checking here that the rename of z/b and z/c to put +# them under y/ doesn't accidentally catch z/d and make it look like +# it is also involved in a rename/delete conflict. + +test_expect_success '6a-setup: Tricky rename/delete' ' + test_create_repo 6a && + ( + cd 6a && + + mkdir z && + echo b >z/b && + echo c >z/c && + echo d >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git rm z/d && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y && + git mv z/b y/ && + git mv z/c y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6a-check: Tricky rename/delete' ' + ( + cd 6a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :3:y/c && + git rev-parse >expect \ + O:z/b O:z/c && + test_cmp expect actual + ) +' + +# Testcase 6b, Same rename done on both sides +# (Related to testcases 6c and 8e) +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# Note: If we did directory rename detection here, we'd move z/d into y/, +# but B did that rename and still decided to put the file into z/, +# so we probably shouldn't apply directory rename detection for it. + +test_expect_success '6b-setup: Same rename done on both sides' ' + test_create_repo 6b && + ( + cd 6b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6b-check: Same rename done on both sides' ' + ( + cd 6b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6c, Rename only done on same side +# (Related to testcases 6b and 8e) +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Seems obvious, but just checking that the implementation doesn't +# "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6c-setup: Rename only done on same side' ' + test_create_repo 6c && + ( + cd 6c && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6c-check: Rename only done on same side' ' + ( + cd 6c && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/d && + test_cmp expect actual + ) +' + +# Testcase 6d, We don't always want transitive renaming +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d +# Commit A: z/{b,c}, x/d (no change) +# Commit B: y/{b,c}, z/d +# Expected: y/{b,c}, z/d +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c,d}. + +test_expect_success '6d-setup: We do not always want transitive renaming' ' + test_create_repo 6d && + ( + cd 6d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + git mv x z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6d-check: We do not always want transitive renaming' ' + ( + cd 6d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 6e, Add/add from one-side +# Commit O: z/{b,c} +# Commit A: z/{b,c} (no change) +# Commit B: y/{b,c,d_1}, z/d_2 +# Expected: y/{b,c,d_1}, z/d_2 +# NOTE: Again, this seems obvious but just checking that the implementation +# doesn't "accidentally detect a rename" and give us y/{b,c} + +# add/add conflict on y/d_1 vs y/d_2. + +test_expect_success '6e-setup: Add/add from one side' ' + test_create_repo 6e && + ( + cd 6e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + git commit --allow-empty -m "A" && + + git checkout B && + git mv z y && + echo d1 > y/d && + mkdir z && + echo d2 > z/d && + git add y/d z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '6e-check: Add/add from one side' ' + ( + cd 6e && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:y/d B:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 6: +# +# Only apply implicit directory renames to directories if the other +# side of history is the one doing the renaming. +########################################################################### + + +########################################################################### +# SECTION 7: More involved Edge/Corner cases +# +# The ruleset we have generated in the above sections seems to provide +# well-defined merges. But can we find edge/corner cases that either (a) +# are harder for users to understand, or (b) have a resolution that is +# non-intuitive or suboptimal? +# +# The testcases in this section dive into cases that I've tried to craft in +# a way to find some that might be surprising to users or difficult for +# them to understand (the next section will look at non-intuitive or +# suboptimal merge results). Some of the testcases are similar to ones +# from past sections, but have been simplified to try to highlight error +# messages using a "modified" path (due to the directory rename). Are +# users okay with these? +# +# In my opinion, testcases that are difficult to understand from this +# section is due to difficulty in the testcase rather than the directory +# renaming (similar to how t6042 and t6036 have difficult resolutions due +# to the problem setup itself being complex). And I don't think the +# error messages are a problem. +# +# On the other hand, the testcases in section 8 worry me slightly more... +########################################################################### + +# Testcase 7a, rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/b, x/c, z/d +# Expected: y/d, CONFLICT(rename/rename for both z/b and z/c) +# NOTE: There's a rename of z/ here, y/ has more renames, so z/d -> y/d. + +test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + test_create_repo 7a && + ( + cd 7a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir w && + mkdir x && + git mv z/b w/ && + git mv z/c x/ && + echo d > z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + ( + cd 7a && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*z/b.*y/b.*w/b" out && + test_i18ngrep "CONFLICT (rename/rename).*z/c.*y/c.*x/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:x/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c x/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual + ) +' + +# Testcase 7b, rename/rename(2to1), but only due to transitive rename +# (Related to testcase 1d) +# Commit O: z/{b,c}, x/d_1, w/d_2 +# Commit A: y/{b,c,d_2}, x/d_1 +# Commit B: z/{b,c,d_1}, w/d_2 +# Expected: y/{b,c}, CONFLICT(rename/rename(2to1): x/d_1, w/d_2 -> y_d) + +test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive rename' ' + test_create_repo 7b && + ( + cd 7b && + + mkdir z && + mkdir x && + mkdir w && + echo b >z/b && + echo c >z/c && + echo d1 > x/d && + echo d2 > w/d && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7b-check: rename/rename(2to1), but only due to transitive rename' ' + ( + cd 7b && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename)" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :2:y/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:w/d O:x/d && + test_cmp expect actual && + + test_path_is_missing y/d && + test_path_is_file y/d~HEAD && + test_path_is_file y/d~B^0 && + + git hash-object >actual \ + y/d~HEAD y/d~B^0 && + git rev-parse >expect \ + O:w/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7c, rename/rename(1to...2or3); transitive rename may add complexity +# (Related to testcases 3b and 5c) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c}, w/d +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(x/d -> w/d vs. y/d) +# NOTE: z/ was renamed to y/ so we do want to report +# neither CONFLICT(x/d -> w/d vs. z/d) +# nor CONFLiCT x/d -> w/d vs. y/d vs. z/d) + +test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may add complexity' ' + test_create_repo 7c && + ( + cd 7c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv x w && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may add complexity' ' + ( + cd 7c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :1:x/d :2:w/d :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/d O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7d, transitive rename involved in rename/delete; how is it reported? +# (Related somewhat to testcases 5b and 8d) +# Commit O: z/{b,c}, x/d +# Commit A: y/{b,c} +# Commit B: z/{b,c,d} +# Expected: y/{b,c}, CONFLICT(delete x/d vs rename to y/d) +# NOTE: z->y so NOT CONFLICT(delete x/d vs rename to z/d) + +test_expect_success '7d-setup: transitive rename involved in rename/delete; how is it reported?' ' + test_create_repo 7d && + ( + cd 7d && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm -rf x && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7d-check: transitive rename involved in rename/delete; how is it reported?' ' + ( + cd 7d && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + O:z/b O:z/c O:x/d && + test_cmp expect actual + ) +' + +# Testcase 7e, transitive rename in rename/delete AND dirs in the way +# (Very similar to 'both rename source and destination involved in D/F conflict' from t6022-merge-rename.sh) +# (Also related to testcases 9c and 9d) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c,d/g}, x/d/f +# Commit B: z/{b,c,d_1} +# Expected: rename/delete(x/d_1->y/d_1 vs. None) + D/F conflict on y/d +# y/{b,c,d/g}, y/d_1~B^0, x/d/f + +# NOTE: The main path of interest here is d_1 and where it ends up, but +# this is actually a case that has two potential directory renames +# involved and D/F conflict(s), so it makes sense to walk through +# each step. +# +# Commit A renames z/ -> y/. Thus everything that B adds to z/ +# should be instead moved to y/. This gives us the D/F conflict on +# y/d because x/d_1 -> z/d_1 -> y/d_1 conflicts with y/d/g. +# +# Further, commit B renames x/ -> z/, thus everything A adds to x/ +# should instead be moved to z/...BUT we removed z/ and renamed it +# to y/, so maybe everything should move not from x/ to z/, but +# from x/ to z/ to y/. Doing so might make sense from the logic so +# far, but note that commit A had both an x/ and a y/; it did the +# renaming of z/ to y/ and created x/d/f and it clearly made these +# things separate, so it doesn't make much sense to push these +# together. Doing so is what I'd call a doubly transitive rename; +# see testcases 9c and 9d for further discussion of this issue and +# how it's resolved. + +test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in the way' ' + test_create_repo 7e && + ( + cd 7e && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d1 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git rm x/d && + mkdir -p x/d && + mkdir -p y/d && + echo f >x/d/f && + echo g >y/d/g && + git add x/d/f y/d/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/ && + rmdir x && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '7e-check: transitive rename in rename/delete AND dirs in the way' ' + ( + cd 7e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:x/d/f :0:y/d/g :0:y/b :0:y/c :3:y/d && + git rev-parse >expect \ + A:x/d/f A:y/d/g O:z/b O:z/c O:x/d && + test_cmp expect actual && + + git hash-object y/d~B^0 >actual && + git rev-parse O:x/d >expect && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 8: Suboptimal merges +# +# As alluded to in the last section, the ruleset we have built up for +# detecting directory renames unfortunately has some special cases where it +# results in slightly suboptimal or non-intuitive behavior. This section +# explores these cases. +# +# To be fair, we already had non-intuitive or suboptimal behavior for most +# of these cases in git before introducing implicit directory rename +# detection, but it'd be nice if there was a modified ruleset out there +# that handled these cases a bit better. +########################################################################### + +# Testcase 8a, Dual-directory rename, one into the others' way +# Commit O. x/{a,b}, y/{c,d} +# Commit A. x/{a,b,e}, y/{c,d,f} +# Commit B. y/{a,b}, z/{c,d} +# +# Possible Resolutions: +# w/o dir-rename detection: y/{a,b,f}, z/{c,d}, x/e +# Currently expected: y/{a,b,e,f}, z/{c,d} +# Optimal: y/{a,b,e}, z/{c,d,f} +# +# Note: Both x and y got renamed and it'd be nice to detect both, and we do +# better with directory rename detection than git did without, but the +# simple rule from section 5 prevents me from handling this as optimally as +# we potentially could. + +test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' + test_create_repo 8a && + ( + cd 8a && + + mkdir x && + mkdir y && + echo a >x/a && + echo b >x/b && + echo c >y/c && + echo d >y/d && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e >x/e && + echo f >y/f && + git add x/e y/f && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8a-check: Dual-directory rename, one into the others way' ' + ( + cd 8a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:y/e HEAD:y/f HEAD:z/c HEAD:z/d && + git rev-parse >expect \ + O:x/a O:x/b A:x/e A:y/f O:y/c O:y/d && + test_cmp expect actual + ) +' + +# Testcase 8b, Dual-directory rename, one into the others' way, with conflicting filenames +# Commit O. x/{a_1,b_1}, y/{a_2,b_2} +# Commit A. x/{a_1,b_1,e_1}, y/{a_2,b_2,e_2} +# Commit B. y/{a_1,b_1}, z/{a_2,b_2} +# +# w/o dir-rename detection: y/{a_1,b_1,e_2}, z/{a_2,b_2}, x/e_1 +# Currently expected: <same> +# Scary: y/{a_1,b_1}, z/{a_2,b_2}, CONFLICT(add/add, e_1 vs. e_2) +# Optimal: y/{a_1,b_1,e_1}, z/{a_2,b_2,e_2} +# +# Note: Very similar to 8a, except instead of 'e' and 'f' in directories x and +# y, both are named 'e'. Without directory rename detection, neither file +# moves directories. Implement directory rename detection suboptimally, and +# you get an add/add conflict, but both files were added in commit A, so this +# is an add/add conflict where one side of history added both files -- +# something we can't represent in the index. Obviously, we'd prefer the last +# resolution, but our previous rules are too coarse to allow it. Using both +# the rules from section 4 and section 5 save us from the Scary resolution, +# making us fall back to pre-directory-rename-detection behavior for both +# e_1 and e_2. + +test_expect_success '8b-setup: Dual-directory rename, one into the others way, with conflicting filenames' ' + test_create_repo 8b && + ( + cd 8b && + + mkdir x && + mkdir y && + echo a1 >x/a && + echo b1 >x/b && + echo a2 >y/a && + echo b2 >y/b && + git add x y && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo e1 >x/e && + echo e2 >y/e && + git add x/e y/e && + test_tick && + git commit -m "A" && + + git checkout B && + git mv y z && + git mv x y && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8b-check: Dual-directory rename, one into the others way, with conflicting filenames' ' + ( + cd 8b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/a HEAD:y/b HEAD:z/a HEAD:z/b HEAD:x/e HEAD:y/e && + git rev-parse >expect \ + O:x/a O:x/b O:y/a O:y/b A:x/e A:y/e && + test_cmp expect actual + ) +' + +# Testcase 8c, modify/delete or rename+modify/delete? +# (Related to testcases 5b, 8d, and 9h) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d_modified,e} +# Expected: y/{b,c,e}, CONFLICT(modify/delete: on z/d) +# +# Note: It could easily be argued that the correct resolution here is +# y/{b,c,e}, CONFLICT(rename/delete: z/d -> y/d vs deleted) +# and that the modifed version of d should be present in y/ after +# the merge, just marked as conflicted. Indeed, I previously did +# argue that. But applying directory renames to the side of +# history where a file is merely modified results in spurious +# rename/rename(1to2) conflicts -- see testcase 9h. See also +# notes in 8d. + +test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' + test_create_repo 8c && + ( + cd 8c && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >z/d && + test_chmod +x z/d && + echo e >z/e && + git add z/d z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8c-check: modify/delete or rename+modify/delete' ' + ( + cd 8c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (modify/delete).* z/d" out && + + git ls-files -s >out && + test_line_count = 5 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + :0:y/b :0:y/c :0:y/e :1:z/d :3:z/d && + git rev-parse >expect \ + O:z/b O:z/c B:z/e O:z/d B:z/d && + test_cmp expect actual && + + test_must_fail git rev-parse :2:z/d && + git ls-files -s z/d | grep ^100755 && + test_path_is_file z/d && + test_path_is_missing y/d + ) +' + +# Testcase 8d, rename/delete...or not? +# (Related to testcase 5b; these may appear slightly inconsistent to users; +# Also related to testcases 7d and 7e) +# Commit O: z/{b,c,d} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e} +# Expected: y/{b,c,e} +# +# Note: It would also be somewhat reasonable to resolve this as +# y/{b,c,e}, CONFLICT(rename/delete: x/d -> y/d or deleted) +# +# In this case, I'm leaning towards: commit A was the one that deleted z/d +# and it did the rename of z to y, so the two "conflicts" (rename vs. +# delete) are both coming from commit A, which is illogical. Conflicts +# during merging are supposed to be about opposite sides doing things +# differently. + +test_expect_success '8d-setup: rename/delete...or not?' ' + test_create_repo 8d && + ( + cd 8d && + + mkdir z && + echo b >z/b && + echo c >z/c && + test_seq 1 10 >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/d && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8d-check: rename/delete...or not?' ' + ( + cd 8d && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual + ) +' + +# Testcase 8e, Both sides rename, one side adds to original directory +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: w/{b,c}, z/d +# +# Possible Resolutions: +# w/o dir-rename detection: z/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Currently expected: y/d, CONFLICT(z/b -> y/b vs. w/b), +# CONFLICT(z/c -> y/c vs. w/c) +# Optimal: ?? +# +# Notes: In commit A, directory z got renamed to y. In commit B, directory z +# did NOT get renamed; the directory is still present; instead it is +# considered to have just renamed a subset of paths in directory z +# elsewhere. Therefore, the directory rename done in commit A to z/ +# applies to z/d and maps it to y/d. +# +# It's possible that users would get confused about this, but what +# should we do instead? Silently leaving at z/d seems just as bad or +# maybe even worse. Perhaps we could print a big warning about z/d +# and how we're moving to y/d in this case, but when I started thinking +# about the ramifications of doing that, I didn't know how to rule out +# that opening other weird edge and corner cases so I just punted. + +test_expect_success '8e-setup: Both sides rename, one side adds to original directory' ' + test_create_repo 8e && + ( + cd 8e && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z w && + mkdir z && + echo d >z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '8e-check: Both sides rename, one side adds to original directory' ' + ( + cd 8e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep CONFLICT.*rename/rename.*z/c.*y/c.*w/c out && + test_i18ngrep CONFLICT.*rename/rename.*z/b.*y/b.*w/b out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :1:z/b :2:y/b :3:w/b :1:z/c :2:y/c :3:w/c :0:y/d && + git rev-parse >expect \ + O:z/b O:z/b O:z/b O:z/c O:z/c O:z/c B:z/d && + test_cmp expect actual && + + git hash-object >actual \ + y/b w/b y/c w/c && + git rev-parse >expect \ + O:z/b O:z/b O:z/c O:z/c && + test_cmp expect actual && + + test_path_is_missing z/b && + test_path_is_missing z/c + ) +' + +########################################################################### +# SECTION 9: Other testcases +# +# This section consists of miscellaneous testcases I thought of during +# the implementation which round out the testing. +########################################################################### + +# Testcase 9a, Inner renamed directory within outer renamed directory +# (Related to testcase 1f) +# Commit O: z/{b,c,d/{e,f,g}} +# Commit A: y/{b,c}, x/w/{e,f,g} +# Commit B: z/{b,c,d/{e,f,g,h},i} +# Expected: y/{b,c,i}, x/w/{e,f,g,h} +# NOTE: The only reason this one is interesting is because when a directory +# is split into multiple other directories, we determine by the weight +# of which one had the most paths going to it. A naive implementation +# of that could take the new file in commit B at z/i to x/w/i or x/i. + +test_expect_success '9a-setup: Inner renamed directory within outer renamed directory' ' + test_create_repo 9a && + ( + cd 9a && + + mkdir -p z/d && + echo b >z/b && + echo c >z/c && + echo e >z/d/e && + echo f >z/d/f && + echo g >z/d/g && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir x && + git mv z/d x/w && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo h >z/d/h && + echo i >z/i && + git add z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9a-check: Inner renamed directory within outer renamed directory' ' + ( + cd 9a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/i && + git rev-parse >expect \ + O:z/b O:z/c B:z/i && + test_cmp expect actual && + + git rev-parse >actual \ + HEAD:x/w/e HEAD:x/w/f HEAD:x/w/g HEAD:x/w/h && + git rev-parse >expect \ + O:z/d/e O:z/d/f O:z/d/g B:z/d/h && + test_cmp expect actual + ) +' + +# Testcase 9b, Transitive rename with content merge +# (Related to testcase 1c) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c}, x/d_2 +# Commit B: z/{b,c,d_3} +# Expected: y/{b,c,d_merged} + +test_expect_success '9b-setup: Transitive rename with content merge' ' + test_create_repo 9b && + ( + cd 9b && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + test_seq 1 10 >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_seq 1 11 >x/d && + git add x/d && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 0 10 >x/d && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9b-check: Transitive rename with content merge' ' + ( + cd 9b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + test_seq 0 11 >expected && + test_cmp expected y/d && + git add expected && + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d && + git rev-parse >expect \ + O:z/b O:z/c :0:expected && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:x/d && + test_must_fail git rev-parse HEAD:z/d && + test_path_is_missing z/d && + + test $(git rev-parse HEAD:y/d) != $(git rev-parse O:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse A:x/d) && + test $(git rev-parse HEAD:y/d) != $(git rev-parse B:z/d) + ) +' + +# Testcase 9c, Doubly transitive rename? +# (Related to testcase 1c, 7e, and 9d) +# Commit O: z/{b,c}, x/{d,e}, w/f +# Commit A: y/{b,c}, x/{d,e,f,g} +# Commit B: z/{b,c,d,e}, w/f +# Expected: y/{b,c,d,e}, x/{f,g} +# +# NOTE: x/f and x/g may be slightly confusing here. The rename from w/f to +# x/f is clear. Let's look beyond that. Here's the logic: +# Commit B renamed x/ -> z/ +# Commit A renamed z/ -> y/ +# So, we could possibly further rename x/f to z/f to y/f, a doubly +# transient rename. However, where does it end? We can chain these +# indefinitely (see testcase 9d). What if there is a D/F conflict +# at z/f/ or y/f/? Or just another file conflict at one of those +# paths? In the case of an N-long chain of transient renamings, +# where do we "abort" the rename at? Can the user make sense of +# the resulting conflict and resolve it? +# +# To avoid this confusion I use the simple rule that if the other side +# of history did a directory rename to a path that your side renamed +# away, then ignore that particular rename from the other side of +# history for any implicit directory renames. + +test_expect_success '9c-setup: Doubly transitive rename?' ' + test_create_repo 9c && + ( + cd 9c && + + mkdir z && + echo b >z/b && + echo c >z/c && + mkdir x && + echo d >x/d && + echo e >x/e && + mkdir w && + echo f >w/f && + git add z x w && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv w/f x/ && + echo g >x/g && + git add x/g && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + git mv x/e z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9c-check: Doubly transitive rename?' ' + ( + cd 9c && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying x -> z rename to x/f" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:y/d HEAD:y/e HEAD:x/f HEAD:x/g && + git rev-parse >expect \ + O:z/b O:z/c O:x/d O:x/e O:w/f A:x/g && + test_cmp expect actual + ) +' + +# Testcase 9d, N-fold transitive rename? +# (Related to testcase 9c...and 1c and 7e) +# Commit O: z/a, y/b, x/c, w/d, v/e, u/f +# Commit A: y/{a,b}, w/{c,d}, u/{e,f} +# Commit B: z/{a,t}, x/{b,c}, v/{d,e}, u/f +# Expected: <see NOTE first> +# +# NOTE: z/ -> y/ (in commit A) +# y/ -> x/ (in commit B) +# x/ -> w/ (in commit A) +# w/ -> v/ (in commit B) +# v/ -> u/ (in commit A) +# So, if we add a file to z, say z/t, where should it end up? In u? +# What if there's another file or directory named 't' in one of the +# intervening directories and/or in u itself? Also, shouldn't the +# same logic that places 't' in u/ also move ALL other files to u/? +# What if there are file or directory conflicts in any of them? If +# we attempted to do N-way (N-fold? N-ary? N-uple?) transitive renames +# like this, would the user have any hope of understanding any +# conflicts or how their working tree ended up? I think not, so I'm +# ruling out N-ary transitive renames for N>1. +# +# Therefore our expected result is: +# z/t, y/a, x/b, w/c, u/d, u/e, u/f +# The reason that v/d DOES get transitively renamed to u/d is that u/ isn't +# renamed somewhere. A slightly sub-optimal result, but it uses fairly +# simple rules that are consistent with what we need for all the other +# testcases and simplifies things for the user. + +test_expect_success '9d-setup: N-way transitive rename?' ' + test_create_repo 9d && + ( + cd 9d && + + mkdir z y x w v u && + echo a >z/a && + echo b >y/b && + echo c >x/c && + echo d >w/d && + echo e >v/e && + echo f >u/f && + git add z y x w v u && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/a y/ && + git mv x/c w/ && + git mv v/e u/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo t >z/t && + git mv y/b x/ && + git mv w/d v/ && + git add z/t && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9d-check: N-way transitive rename?' ' + ( + cd 9d && + + git checkout A^0 && + + git merge -s recursive B^0 >out && + test_i18ngrep "WARNING: Avoiding applying z -> y rename to z/t" out && + test_i18ngrep "WARNING: Avoiding applying y -> x rename to y/a" out && + test_i18ngrep "WARNING: Avoiding applying x -> w rename to x/b" out && + test_i18ngrep "WARNING: Avoiding applying w -> v rename to w/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -o >out && + test_line_count = 1 out && + + git rev-parse >actual \ + HEAD:z/t \ + HEAD:y/a HEAD:x/b HEAD:w/c \ + HEAD:u/d HEAD:u/e HEAD:u/f && + git rev-parse >expect \ + B:z/t \ + O:z/a O:y/b O:x/c \ + O:w/d O:v/e A:u/f && + test_cmp expect actual + ) +' + +# Testcase 9e, N-to-1 whammo +# (Related to testcase 9c...and 1c and 7e) +# Commit O: dir1/{a,b}, dir2/{d,e}, dir3/{g,h}, dirN/{j,k} +# Commit A: dir1/{a,b,c,yo}, dir2/{d,e,f,yo}, dir3/{g,h,i,yo}, dirN/{j,k,l,yo} +# Commit B: combined/{a,b,d,e,g,h,j,k} +# Expected: combined/{a,b,c,d,e,f,g,h,i,j,k,l}, CONFLICT(Nto1) warnings, +# dir1/yo, dir2/yo, dir3/yo, dirN/yo + +test_expect_success '9e-setup: N-to-1 whammo' ' + test_create_repo 9e && + ( + cd 9e && + + mkdir dir1 dir2 dir3 dirN && + echo a >dir1/a && + echo b >dir1/b && + echo d >dir2/d && + echo e >dir2/e && + echo g >dir3/g && + echo h >dir3/h && + echo j >dirN/j && + echo k >dirN/k && + git add dir* && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + echo c >dir1/c && + echo yo >dir1/yo && + echo f >dir2/f && + echo yo >dir2/yo && + echo i >dir3/i && + echo yo >dir3/yo && + echo l >dirN/l && + echo yo >dirN/yo && + git add dir* && + test_tick && + git commit -m "A" && + + git checkout B && + git mv dir1 combined && + git mv dir2/* combined/ && + git mv dir3/* combined/ && + git mv dirN/* combined/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' + ( + cd 9e && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + grep "CONFLICT (implicit dir rename): Cannot map more than one path to combined/yo" out >error_line && + grep -q dir1/yo error_line && + grep -q dir2/yo error_line && + grep -q dir3/yo error_line && + grep -q dirN/yo error_line && + + git ls-files -s >out && + test_line_count = 16 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 2 out && + + git rev-parse >actual \ + :0:combined/a :0:combined/b :0:combined/c \ + :0:combined/d :0:combined/e :0:combined/f \ + :0:combined/g :0:combined/h :0:combined/i \ + :0:combined/j :0:combined/k :0:combined/l && + git rev-parse >expect \ + O:dir1/a O:dir1/b A:dir1/c \ + O:dir2/d O:dir2/e A:dir2/f \ + O:dir3/g O:dir3/h A:dir3/i \ + O:dirN/j O:dirN/k A:dirN/l && + test_cmp expect actual && + + git rev-parse >actual \ + :0:dir1/yo :0:dir2/yo :0:dir3/yo :0:dirN/yo && + git rev-parse >expect \ + A:dir1/yo A:dir2/yo A:dir3/yo A:dirN/yo && + test_cmp expect actual + ) +' + +# Testcase 9f, Renamed directory that only contained immediate subdirs +# (Related to testcases 1e & 9g) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{a,b}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{a,b}/$more_files, priority/c + +test_expect_success '9f-setup: Renamed directory that only contained immediate subdirs' ' + test_create_repo 9f && + ( + cd 9f && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv goal/ priority && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9f-check: Renamed directory that only contained immediate subdirs' ' + ( + cd 9f && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/a/foo \ + HEAD:priority/b/bar \ + HEAD:priority/b/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9g, Renamed directory that only contained immediate subdirs, immediate subdirs renamed +# (Related to testcases 1e & 9f) +# Commit O: goal/{a,b}/$more_files +# Commit A: priority/{alpha,bravo}/$more_files +# Commit B: goal/{a,b}/$more_files, goal/c +# Expected: priority/{alpha,bravo}/$more_files, priority/c + +test_expect_success '9g-setup: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + test_create_repo 9g && + ( + cd 9g && + + mkdir -p goal/a && + mkdir -p goal/b && + echo foo >goal/a/foo && + echo bar >goal/b/bar && + echo baz >goal/b/baz && + git add goal && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir priority && + git mv goal/a/ priority/alpha && + git mv goal/b/ priority/beta && + rmdir goal/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >goal/c && + git add goal/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '9g-check: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' + ( + cd 9g && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:priority/alpha/foo \ + HEAD:priority/beta/bar \ + HEAD:priority/beta/baz \ + HEAD:priority/c && + git rev-parse >expect \ + O:goal/a/foo \ + O:goal/b/bar \ + O:goal/b/baz \ + B:goal/c && + test_cmp expect actual && + test_must_fail git rev-parse HEAD:goal/c + ) +' + +# Testcase 9h, Avoid implicit rename if involved as source on other side +# (Extremely closely related to testcase 3a) +# Commit O: z/{b,c,d_1} +# Commit A: z/{b,c,d_2} +# Commit B: y/{b,c}, x/d_1 +# Expected: y/{b,c}, x/d_2 +# NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with +# a rename/rename(1to2) conflict (z/d -> y/d vs. x/d) +test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' + test_create_repo 9h && + ( + cd 9h && + + mkdir z && + echo b >z/b && + echo c >z/c && + printf "1\n2\n3\n4\n5\n6\n7\n8\nd\n" >z/d && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_tick && + echo more >>z/d && + git add z/d && + git commit -m "A" && + + git checkout B && + mkdir y && + mkdir x && + git mv z/b y/ && + git mv z/c y/ && + git mv z/d x/ && + rmdir z && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '9h-check: Avoid dir rename on merely modified path' ' + ( + cd 9h && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 3 out && + + git rev-parse >actual \ + HEAD:y/b HEAD:y/c HEAD:x/d && + git rev-parse >expect \ + O:z/b O:z/c A:z/d && + test_cmp expect actual + ) +' + +########################################################################### +# Rules suggested by section 9: +# +# If the other side of history did a directory rename to a path that your +# side renamed away, then ignore that particular rename from the other +# side of history for any implicit directory renames. +########################################################################### + +########################################################################### +# SECTION 10: Handling untracked files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling, at least in the case of directory renames. +########################################################################### + +# Testcase 10a, Overwrite untracked: normal rename/delete +# Commit O: z/{b,c_1} +# Commit A: z/b + untracked z/c + untracked z/d +# Commit B: z/{b,d_1} +# Expected: Aborted Merge + +# ERROR_MSG(untracked working tree files would be overwritten by merge) + +test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' + test_create_repo 10a && + ( + cd 10a && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' + ( + cd 10a && + + git checkout A^0 && + echo very >z/c && + echo important >z/d && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "The following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo very >expect && + test_cmp expect z/c && + + echo important >expect && + test_cmp expect z/d && + + git rev-parse HEAD:z/b >actual && + git rev-parse O:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 10b, Overwrite untracked: dir rename + delete +# Commit O: z/{b,c_1} +# Commit A: y/b + untracked y/{c,d,e} +# Commit B: z/{b,d_1,e} +# Expected: Failed Merge; y/b + untracked y/c + untracked y/d on disk + +# z/c_1 -> z/d_1 rename recorded at stage 3 for y/d + +# ERROR_MSG(refusing to lose untracked file at 'y/d') + +test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' + test_create_repo 10b && + ( + cd 10b && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git rm z/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z/c z/d && + echo e >z/e && + git add z/e && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' + ( + cd 10b && + + git checkout A^0 && + echo very >y/c && + echo important >y/d && + echo contents >y/e && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/delete).*Version B\^0 of y/d left in tree at y/d~B\^0" out && + test_i18ngrep "Error: Refusing to lose untracked file at y/e; writing to y/e~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:y/b :3:y/d :3:y/e && + git rev-parse >expect \ + O:z/b O:z/c B:z/e && + test_cmp expect actual && + + echo very >expect && + test_cmp expect y/c && + + echo important >expect && + test_cmp expect y/d && + + echo contents >expect && + test_cmp expect y/e + ) +' + +# Testcase 10c, Overwrite untracked: dir rename/rename(1to2) +# Commit O: z/{a,b}, x/{c,d} +# Commit A: y/{a,b}, w/c, x/d + different untracked y/c +# Commit B: z/{a,b,c}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + untracked y/c + +# CONFLICT(rename/rename) x/c -> w/c vs y/c + +# y/c~B^0 + +# ERROR_MSG(Refusing to lose untracked file at y/c) + +test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2)' ' + test_create_repo 10c && + ( + cd 10c && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir w && + git mv x/c w/c && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2)' ' + ( + cd 10c && + + git checkout A^0 && + echo important >y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~B\^0 instead" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c O:x/c && + test_cmp expect actual && + + git hash-object y/c~B^0 >actual && + git rev-parse O:x/c >expect && + test_cmp expect actual && + + echo important >expect && + test_cmp expect y/c + ) +' + +# Testcase 10d, Delete untracked w/ dir rename/rename(2to1) +# Commit O: z/{a,b,c_1}, x/{d,e,f_2} +# Commit A: y/{a,b}, x/{d,e,f_2,wham_1} + untracked y/wham +# Commit B: z/{a,b,c_1,wham_2}, y/{d,e} +# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~B^0,wham~HEAD}+ +# CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham +# ERROR_MSG(Refusing to lose untracked file at y/wham) + +test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' + test_create_repo 10d && + ( + cd 10d && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >z/c && + echo d >x/d && + echo e >x/e && + echo f >x/f && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/c x/wham && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/f z/wham && + git mv x/ y/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' + ( + cd 10d && + + git checkout A^0 && + echo important >y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/wham" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/d :0:y/e :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/e O:z/c O:x/f && + test_cmp expect actual && + + test_must_fail git rev-parse :1:y/wham && + + echo important >expect && + test_cmp expect y/wham && + + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/f O:z/c && + test_cmp expect actual + ) +' + +# Testcase 10e, Does git complain about untracked file that's not in the way? +# Commit O: z/{a,b} +# Commit A: y/{a,b} + untracked z/c +# Commit B: z/{a,b,c} +# Expected: y/{a,b,c} + untracked z/c + +test_expect_success '10e-setup: Does git complain about untracked file that is not really in the way?' ' + test_create_repo 10e && + ( + cd 10e && + + mkdir z && + echo a >z/a && + echo b >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo c >z/c && + git add z/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_failure '10e-check: Does git complain about untracked file that is not really in the way?' ' + ( + cd 10e && + + git checkout A^0 && + mkdir z && + echo random >z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep ! "following untracked working tree files would be overwritten by merge" err && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:y/c && + git rev-parse >expect \ + O:z/a O:z/b B:z/c && + test_cmp expect actual && + + echo random >expect && + test_cmp expect z/c + ) +' + +########################################################################### +# SECTION 11: Handling dirty (not up-to-date) files +# +# unpack_trees(), upon which the recursive merge algorithm is based, aborts +# the operation if untracked or dirty files would be deleted or overwritten +# by the merge. Unfortunately, unpack_trees() does not understand renames, +# and if it doesn't abort, then it muddies up the working directory before +# we even get to the point of detecting renames, so we need some special +# handling. This was true even of normal renames, but there are additional +# codepaths that need special handling with directory renames. Add +# testcases for both renamed-by-directory-rename-detection and standard +# rename cases. +########################################################################### + +# Testcase 11a, Avoid losing dirty contents with simple rename +# Commit O: z/{a,b_v1}, +# Commit A: z/{a,c_v1}, and z/c_v1 has uncommitted mods +# Commit B: z/{a,b_v2} +# Expected: ERROR_MSG(Refusing to lose dirty file at z/c) + +# z/a, staged version of z/c has sha1sum matching B:z/b_v2, +# z/c~HEAD with contents of B:z/b_v2, +# z/c with uncommitted mods on top of A:z/c_v1 + +test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' ' + test_create_repo 11a && + ( + cd 11a && + + mkdir z && + echo a >z/a && + test_seq 1 10 >z/b && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/b z/c && + test_tick && + git commit -m "A" && + + git checkout B && + echo 11 >>z/b && + git add z/b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11a-check: Avoid losing dirty contents with simple rename' ' + ( + cd 11a && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:z/a :2:z/c && + git rev-parse >expect \ + O:z/a B:z/b && + test_cmp expect actual && + + git hash-object z/c~HEAD >actual && + git rev-parse B:z/b >expect && + test_cmp expect actual + ) +' + +# Testcase 11b, Avoid losing dirty file involved in directory rename +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/a, x/{b,c_v2} +# Expected: y/{a,c_v2}, x/b, z/c_v1 with uncommitted mods untracked, +# ERROR_MSG(Refusing to lose dirty file at z/c) + + +test_expect_success '11b-setup: Avoid losing dirty file involved in directory rename' ' + test_create_repo 11b && + ( + cd 11b && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + echo 11 >>x/c && + git add x/c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11b-check: Avoid losing dirty file involved in directory rename' ' + ( + cd 11b && + + git checkout A^0 && + echo stuff >>z/c && + + git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 0 out && + git ls-files -o >out && + test_line_count = 4 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:x/c && + test_cmp expect actual && + + git hash-object y/c >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11c, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: y/a, x/{b,c_v1} +# Commit A: y/{a,c_v1}, x/b, and y/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: Abort_msg("following files would be overwritten by merge") + +# y/c left untouched (still has uncommitted mods) + +test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11c && + ( + cd 11c && + + mkdir y x && + echo a >y/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add y x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c y/c && + test_tick && + git commit -m "A" && + + git checkout B && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11c && + + git checkout A^0 && + echo stuff >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "following files would be overwritten by merge" err && + + grep -q stuff y/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected y/c && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 0 out && + git ls-files -m >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 3 out + ) +' + +# Testcase 11d, Avoid losing not-up-to-date with rename + D/F conflict +# Commit O: z/a, x/{b,c_v1} +# Commit A: z/{a,c_v1}, x/b, and z/c_v1 has uncommitted mods +# Commit B: y/{a,c/d}, x/{b,c_v2} +# Expected: D/F: y/c_v2 vs y/c/d) + +# Warning_Msg("Refusing to lose dirty file at z/c) + +# y/{a,c~HEAD,c/d}, x/b, now-untracked z/c_v1 with uncommitted mods + +test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conflict' ' + test_create_repo 11d && + ( + cd 11d && + + mkdir z x && + echo a >z/a && + echo b >x/b && + test_seq 1 10 >x/c && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv x/c z/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv z y && + mkdir y/c && + echo d >y/c/d && + echo 11 >>x/c && + git add x/c y/c/d && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conflict' ' + ( + cd 11d && + + git checkout A^0 && + echo stuff >>z/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "Refusing to lose dirty file at z/c" out && + + grep -q stuff z/c && + test_seq 1 10 >expected && + echo stuff >>expected && + test_cmp expected z/c + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 1 out && + git ls-files -o >out && + test_line_count = 5 out && + + git rev-parse >actual \ + :0:x/b :0:y/a :0:y/c/d :3:y/c && + git rev-parse >expect \ + O:x/b O:z/a B:y/c/d B:x/c && + test_cmp expect actual && + + git hash-object y/c~HEAD >actual && + git rev-parse B:x/c >expect && + test_cmp expect actual + ) +' + +# Testcase 11e, Avoid deleting not-up-to-date with dir rename/rename(1to2)/add +# Commit O: z/{a,b}, x/{c_1,d} +# Commit A: y/{a,b,c_2}, x/d, w/c_1, and y/c_2 has uncommitted mods +# Commit B: z/{a,b,c_1}, x/d +# Expected: Failed Merge; y/{a,b} + x/d + +# CONFLICT(rename/rename) x/c_1 -> w/c_1 vs y/c_1 + +# ERROR_MSG(Refusing to lose dirty file at y/c) +# y/c~B^0 has O:x/c_1 contents +# y/c~HEAD has A:y/c_2 contents +# y/c has dirty file from before merge + +test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + test_create_repo 11e && + ( + cd 11e && + + mkdir z x && + echo a >z/a && + echo b >z/b && + echo c >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + echo different >y/c && + mkdir w && + git mv x/c w/ && + git add y/c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/c z/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + ( + cd 11e && + + git checkout A^0 && + echo mods >>y/c && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/c" out && + + git ls-files -s >out && + test_line_count = 7 out && + git ls-files -u >out && + test_line_count = 4 out && + git ls-files -o >out && + test_line_count = 4 out && + + echo different >expected && + echo mods >>expected && + test_cmp expected y/c && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :2:w/c :2:y/c :3:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c A:y/c O:x/c && + test_cmp expect actual && + + git hash-object >actual \ + y/c~B^0 y/c~HEAD && + git rev-parse >expect \ + O:x/c A:y/c && + test_cmp expect actual + ) +' + +# Testcase 11f, Avoid deleting not-up-to-date w/ dir rename/rename(2to1) +# Commit O: z/{a,b}, x/{c_1,d_2} +# Commit A: y/{a,b,wham_1}, x/d_2, except y/wham has uncommitted mods +# Commit B: z/{a,b,wham_2}, x/c_1 +# Expected: Failed Merge; y/{a,b} + untracked y/{wham~B^0,wham~B^HEAD} + +# y/wham with dirty changes from before merge + +# CONFLICT(rename/rename) x/c vs x/d -> y/wham +# ERROR_MSG(Refusing to lose dirty file at y/wham) + +test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + test_create_repo 11f && + ( + cd 11f && + + mkdir z x && + echo a >z/a && + echo b >z/b && + test_seq 1 10 >x/c && + echo d >x/d && + git add z x && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z/ y/ && + git mv x/c y/wham && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/wham && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + ( + cd 11f && + + git checkout A^0 && + echo important >>y/wham && + + test_must_fail git merge -s recursive B^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose dirty file at y/wham" out && + + git ls-files -s >out && + test_line_count = 4 out && + git ls-files -u >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 4 out && + + test_seq 1 10 >expected && + echo important >>expected && + test_cmp expected y/wham && + + test_must_fail git rev-parse :1:y/wham && + git hash-object >actual \ + y/wham~B^0 y/wham~HEAD && + git rev-parse >expect \ + O:x/d O:x/c && + test_cmp expect actual && + + git rev-parse >actual \ + :0:y/a :0:y/b :2:y/wham :3:y/wham && + git rev-parse >expect \ + O:z/a O:z/b O:x/c O:x/d && + test_cmp expect actual + ) +' + +########################################################################### +# SECTION 12: Everything else +# +# Tests suggested by others. Tests added after implementation completed +# and submitted. Grab bag. +########################################################################### + +# Testcase 12a, Moving one directory hierarchy into another +# (Related to testcase 9a) +# Commit O: node1/{leaf1,leaf2}, node2/{leaf3,leaf4} +# Commit A: node1/{leaf1,leaf2,node2/{leaf3,leaf4}} +# Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6} +# Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}} + +test_expect_success '12a-setup: Moving one directory hierarchy into another' ' + test_create_repo 12a && + ( + cd 12a && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo leaf5 >node1/leaf5 && + echo leaf6 >node2/leaf6 && + git add node1 node2 && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12a-check: Moving one directory hierarchy into another' ' + ( + cd 12a && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 6 out && + + git rev-parse >actual \ + HEAD:node1/leaf1 HEAD:node1/leaf2 HEAD:node1/leaf5 \ + HEAD:node1/node2/leaf3 \ + HEAD:node1/node2/leaf4 \ + HEAD:node1/node2/leaf6 && + git rev-parse >expect \ + O:node1/leaf1 O:node1/leaf2 B:node1/leaf5 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + B:node2/leaf6 && + test_cmp expect actual + ) +' + +# Testcase 12b, Moving two directory hierarchies into each other +# (Related to testcases 1c and 12c) +# Commit O: node1/{leaf1, leaf2}, node2/{leaf3, leaf4} +# Commit A: node1/{leaf1, leaf2, node2/{leaf3, leaf4}} +# Commit B: node2/{leaf3, leaf4, node1/{leaf1, leaf2}} +# Expected: node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: Without directory renames, we would expect +# node2/node1/{leaf1, leaf2}, +# node1/node2/{leaf3, leaf4} +# with directory rename detection, we note that +# commit A renames node2/ -> node1/node2/ +# commit B renames node1/ -> node2/node1/ +# therefore, applying those directory renames to the initial result +# (making all four paths experience a transitive renaming), yields +# the expected result. +# +# You may ask, is it weird to have two directories rename each other? +# To which, I can do no more than shrug my shoulders and say that +# even simple rules give weird results when given weird inputs. + +test_expect_success '12b-setup: Moving one directory hierarchy into another' ' + test_create_repo 12b && + ( + cd 12b && + + mkdir -p node1 node2 && + echo leaf1 >node1/leaf1 && + echo leaf2 >node1/leaf2 && + echo leaf3 >node2/leaf3 && + echo leaf4 >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12b-check: Moving one directory hierarchy into another' ' + ( + cd 12b && + + git checkout A^0 && + + git merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 4 out && + + git rev-parse >actual \ + HEAD:node1/node2/node1/leaf1 \ + HEAD:node1/node2/node1/leaf2 \ + HEAD:node2/node1/node2/leaf3 \ + HEAD:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 && + test_cmp expect actual + ) +' + +# Testcase 12c, Moving two directory hierarchies into each other w/ content merge +# (Related to testcase 12b) +# Commit O: node1/{ leaf1_1, leaf2_1}, node2/{leaf3_1, leaf4_1} +# Commit A: node1/{ leaf1_2, leaf2_2, node2/{leaf3_2, leaf4_2}} +# Commit B: node2/{node1/{leaf1_3, leaf2_3}, leaf3_3, leaf4_3} +# Expected: Content merge conflicts for each of: +# node1/node2/node1/{leaf1, leaf2}, +# node2/node1/node2/{leaf3, leaf4} +# NOTE: This is *exactly* like 12c, except that every path is modified on +# each side of the merge. + +test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' ' + test_create_repo 12c && + ( + cd 12c && + + mkdir -p node1 node2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf1\n" >node1/leaf1 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf2\n" >node1/leaf2 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf3\n" >node2/leaf3 && + printf "1\n2\n3\n4\n5\n6\n7\n8\nleaf4\n" >node2/leaf4 && + git add node1 node2 && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv node2/ node1/ && + for i in `git ls-files`; do echo side A >>$i; done && + git add -u && + test_tick && + git commit -m "A" && + + git checkout B && + git mv node1/ node2/ && + for i in `git ls-files`; do echo side B >>$i; done && + git add -u && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '12c-check: Moving one directory hierarchy into another w/ content merge' ' + ( + cd 12c && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 && + + git ls-files -u >out && + test_line_count = 12 out && + + git rev-parse >actual \ + :1:node1/node2/node1/leaf1 \ + :1:node1/node2/node1/leaf2 \ + :1:node2/node1/node2/leaf3 \ + :1:node2/node1/node2/leaf4 \ + :2:node1/node2/node1/leaf1 \ + :2:node1/node2/node1/leaf2 \ + :2:node2/node1/node2/leaf3 \ + :2:node2/node1/node2/leaf4 \ + :3:node1/node2/node1/leaf1 \ + :3:node1/node2/node1/leaf2 \ + :3:node2/node1/node2/leaf3 \ + :3:node2/node1/node2/leaf4 && + git rev-parse >expect \ + O:node1/leaf1 \ + O:node1/leaf2 \ + O:node2/leaf3 \ + O:node2/leaf4 \ + A:node1/leaf1 \ + A:node1/leaf2 \ + A:node1/node2/leaf3 \ + A:node1/node2/leaf4 \ + B:node2/node1/leaf1 \ + B:node2/node1/leaf2 \ + B:node2/leaf3 \ + B:node2/leaf4 && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh new file mode 100755 index 0000000..fcefffc --- /dev/null +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -0,0 +1,761 @@ +#!/bin/sh + +test_description="merge cases" + +# The setup for all of them, pictorially, is: +# +# A +# o +# / \ +# O o ? +# \ / +# o +# B +# +# To help make it easier to follow the flow of tests, they have been +# divided into sections and each test will start with a quick explanation +# of what commits O, A, and B contain. +# +# Notation: +# z/{b,c} means files z/b and z/c both exist +# x/d_1 means file x/d exists with content d1. (Purpose of the +# underscore notation is to differentiate different +# files that might be renamed into each other's paths.) + +. ./test-lib.sh + + +########################################################################### +# SECTION 1: Cases involving no renames (one side has subset of changes of +# the other side) +########################################################################### + +# Testcase 1a, Changes on A, subset of changes on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Expected: b_2 + +test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' + test_create_repo 1a && + ( + cd 1a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout A^0 && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + +test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' + test_when_finished "git -C 1a reset --hard" && + test_when_finished "git -C 1a clean -fd" && + ( + cd 1a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging b" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + git rev-parse A:b >expect && + test_cmp expect actual + ) +' + + +########################################################################### +# SECTION 2: Cases involving basic renames +########################################################################### + +# Testcase 2a, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2 +# Commit B: c_1 +# Expected: c_2 + +test_expect_success '2a-setup: Modify(A)/rename(B)' ' + test_create_repo 2a && + ( + cd 2a && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' + test_when_finished "git -C 2a reset --hard" && + test_when_finished "git -C 2a clean -fd" && + ( + cd 2a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:b >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2b, Changed and renamed on A, subset of changes on B +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Expected: c_2 + +test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_create_repo 2b && + ( + cd 2b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout A^0 && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_when_finished "git -C 2b reset --hard" && + test_when_finished "git -C 2b clean -fd" && + ( + cd 2b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep "Auto-merging c" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual HEAD:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + git rev-parse A:c >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +# Testcase 2c, Changes on A, rename on B +# Commit O: b_1 +# Commit A: b_2, c_3 +# Commit B: c_1 +# Expected: rename/add conflict c_2 vs c_3 +# +# NOTE: Since A modified b_1->b_2, and B renamed b_1->c_1, the threeway +# merge of those files should result in c_2. We then should have a +# rename/add conflict between c_2 and c_3. However, if we note in +# merge_content() that A had the right contents (b_2 has same +# contents as c_2, just at a different name), and that A had the +# right path present (c_3 existed) and thus decides that it can +# skip the update, then we're in trouble. This test verifies we do +# not make that particular mistake. + +test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' + test_create_repo 2c && + ( + cd 2c && + + test_seq 1 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >b && + echo whatever >c && + git add b c && + test_tick && + git commit -m "A" && + + git checkout B && + git mv b c && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '2c-check: Modify b & add c VS rename b->c' ' + ( + cd 2c && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "CONFLICT (rename/add): Rename b->c" out && + test_i18ngrep ! "Skipped c" out && + test_must_be_empty err + + # FIXME: rename/add conflicts are horribly broken right now; + # when I get back to my patch series fixing it and + # rename/rename(2to1) conflicts to bring them in line with + # how add/add conflicts behave, then checks like the below + # could be added. But that patch series is waiting until + # the rename-directory-detection series lands, which this + # is part of. And in the mean time, I do not want to further + # enforce broken behavior. So for now, the main test is the + # one above that err is an empty file. + + #git ls-files -s >index_files && + #test_line_count = 2 index_files && + + #git rev-parse >actual :2:c :3:c && + #git rev-parse >expect A:b A:c && + #test_cmp expect actual && + + #git cat-file -p A:b >>merged && + #git cat-file -p A:c >>merge-me && + #>empty && + #test_must_fail git merge-file \ + # -L "Temporary merge branch 1" \ + # -L "" \ + # -L "Temporary merge branch 2" \ + # merged empty merge-me && + #sed -e "s/^\([<=>]\)/\1\1\1/" merged >merged-internal && + + #git hash-object c >actual && + #git hash-object merged-internal >expect && + #test_cmp expect actual && + + #test_path_is_missing b + ) +' + + +########################################################################### +# SECTION 3: Cases involving directory renames +# +# NOTE: +# Directory renames only apply when one side renames a directory, and the +# other side adds or renames a path into that directory. Applying the +# directory rename to that new path creates a new pathname that didn't +# exist on either side of history. Thus, it is impossible for the +# merge contents to already be at the right path, so all of these checks +# exist just to make sure that updates are not skipped. +########################################################################### + +# Testcase 3a, Change + rename into dir foo on A, dir rename foo->bar on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_2, whatever} +# Commit B: bq_1, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3a && + ( + cd 3a && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_seq 1 11 >bq && + git add bq && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3a reset --hard" && + test_when_finished "git -C 3a clean -fd" && + ( + cd 3a && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect A:foo/bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse A:foo/bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +# Testcase 3b, rename into dir foo on A, dir rename foo->bar + change on B +# Commit O: bq_1, foo/whatever +# Commit A: foo/{bq_1, whatever} +# Commit B: bq_2, bar/whatever +# Expected: bar/{bq_2, whatever} + +test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_create_repo 3b && + ( + cd 3b && + + mkdir foo && + test_seq 1 10 >bq && + test_write_lines a b c d e f g h i j k >foo/whatever && + git add bq foo/whatever && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv bq foo/ && + test_tick && + git commit -m "A" && + + git checkout B && + test_seq 1 11 >bq && + git add bq && + git mv foo/ bar/ && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout A^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_when_finished "git -C 3b reset --hard" && + test_when_finished "git -C 3b clean -fd" && + ( + cd 3b && + + git checkout B^0 && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + + test_i18ngrep ! "Skipped bar/bq" out && + test_must_be_empty err && + + git ls-files -s >index_files && + test_line_count = 2 index_files && + + git rev-parse >actual HEAD:bar/bq HEAD:bar/whatever && + git rev-parse >expect B:bq A:foo/whatever && + test_cmp expect actual && + + git hash-object bar/bq bar/whatever >actual && + git rev-parse B:bq A:foo/whatever >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:bq HEAD:foo/bq && + test_path_is_missing bq foo/bq foo/whatever + ) +' + +########################################################################### +# SECTION 4: Cases involving dirty changes +########################################################################### + +# Testcase 4a, Changed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: b_2 +# Commit B: b_3 +# Working copy: b_4 +# Expected: b_2 for merge, b_4 in working copy + +test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods present' ' + test_create_repo 4a && + ( + cd 4a && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +# NOTE: For as long as we continue using unpack_trees() without index_only +# set to true, it will error out on a case like this claiming the the locally +# modified file would be overwritten by the merge. Getting this testcase +# correct requires doing the merge in-memory first, then realizing that no +# updates to the file are necessary, and thus that we can just leave the path +# alone. +test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4a reset --hard" && + test_when_finished "git -C 4a clean -fd" && + ( + cd 4a && + + git checkout A^0 && + echo "File rewritten" >b && + + test-tool chmtime =31337 b && + test-tool chmtime -v +0 b >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped b" out && + test_must_be_empty err && + + test-tool chmtime -v +0 b >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:b && + git rev-parse >expect A:b && + test_cmp expect actual && + + git hash-object b >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual + ) +' + +# Testcase 4b, Changed+renamed on A, subset of changes on B, locally modified +# Commit O: b_1 +# Commit A: c_2 +# Commit B: b_3 +# Working copy: c_4 +# Expected: c_2 + +test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_create_repo 4b && + ( + cd 4b && + + test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 10.5 >b && + git add b && + git mv b c && + test_tick && + git commit -m "A" && + + git checkout B && + test_write_lines 1 2 3 4 5 5.5 6 7 8 9 10 >b && + git add b && + test_tick && + git commit -m "B" + ) +' + +test_expect_success '4b-check: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_when_finished "git -C 4b reset --hard" && + test_when_finished "git -C 4b clean -fd" && + ( + cd 4b && + + git checkout A^0 && + echo "File rewritten" >c && + + test-tool chmtime =31337 c && + test-tool chmtime -v +0 c >expected-mtime && + + GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + + test_i18ngrep "Skipped c" out && + test_must_be_empty err && + + test-tool chmtime -v +0 c >actual-mtime && + test_cmp expected-mtime actual-mtime && + + git ls-files -s >index_files && + test_line_count = 1 index_files && + + git rev-parse >actual :0:c && + git rev-parse >expect A:c && + test_cmp expect actual && + + git hash-object c >actual && + echo "File rewritten" | git hash-object --stdin >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:b && + test_path_is_missing b + ) +' + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index c630aba..aa3e249 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -4,8 +4,6 @@ # test_description='Tests replace refs functionality' -exec </dev/null - . ./test-lib.sh . "$TEST_DIRECTORY/lib-gpg.sh" @@ -444,4 +442,32 @@ test_expect_success GPG '--graft on a commit with a mergetag' ' git replace -d $HASH10 ' +test_expect_success '--convert-graft-file' ' + git checkout -b with-graft-file && + test_commit root2 && + git reset --hard root2^ && + test_commit root1 && + test_commit after-root1 && + test_tick && + git merge -m merge-root2 root2 && + + : add and convert graft file && + printf "%s\n%s %s\n\n# comment\n%s\n" \ + $(git rev-parse HEAD^^ HEAD^ HEAD^^ HEAD^2) \ + >.git/info/grafts && + git replace --convert-graft-file && + test_path_is_missing .git/info/grafts && + + : verify that the history is now "grafted" && + git rev-list HEAD >out && + test_line_count = 4 out && + + : create invalid graft file and verify that it is not deleted && + test_when_finished "rm -f .git/info/grafts" && + echo $EMPTY_BLOB $EMPTY_TREE >.git/info/grafts && + test_must_fail git replace --convert-graft-file 2>err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" err && + test_i18ngrep "$EMPTY_BLOB $EMPTY_TREE" .git/info/grafts +' + test_done diff --git a/t/t6101-rev-parse-parents.sh b/t/t6101-rev-parse-parents.sh index 8c61798..7683e4a 100755 --- a/t/t6101-rev-parse-parents.sh +++ b/t/t6101-rev-parse-parents.sh @@ -214,4 +214,12 @@ test_expect_success 'rev-list merge^-1x (garbage after ^-1)' ' test_must_fail git rev-list merge^-1x ' +test_expect_success 'rev-parse $garbage^@ does not segfault' ' + test_must_fail git rev-parse $EMPTY_TREE^@ +' + +test_expect_success 'rev-parse $garbage...$garbage does not segfault' ' + test_must_fail git rev-parse $EMPTY_TREE...$EMPTY_BLOB +' + test_done diff --git a/t/t6111-rev-list-treesame.sh b/t/t6111-rev-list-treesame.sh index 32474c2..4244638 100755 --- a/t/t6111-rev-list-treesame.sh +++ b/t/t6111-rev-list-treesame.sh @@ -20,7 +20,7 @@ note () { } unnote () { - git name-rev --tags --stdin | sed -e "s|$_x40 (tags/\([^)]*\))\([ ]\)|\1\2|g" + git name-rev --tags --stdin | sed -e "s|$OID_REGEX (tags/\([^)]*\))\([ ]\)|\1\2|g" } test_expect_success setup ' diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index bae78c4..84dd1cb 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -383,7 +383,7 @@ test_expect_success 'describe complains about tree object' ' ' test_expect_success 'describe complains about missing object' ' - test_must_fail git describe $_z40 + test_must_fail git describe $ZERO_OID ' test_done diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 295d147..48379aa 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -310,7 +310,7 @@ test_expect_success 'exercise strftime with odd fields' ' echo >expected && git for-each-ref --format="%(authordate:format:)" refs/heads >actual && test_cmp expected actual && - long="long format -- $_z40$_z40$_z40$_z40$_z40$_z40$_z40" && + long="long format -- $ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID$ZERO_OID" && echo $long >expected && git for-each-ref --format="%(authordate:format:$long)" refs/heads >actual && test_cmp expected actual diff --git a/t/t6301-for-each-ref-errors.sh b/t/t6301-for-each-ref-errors.sh index c734ce2..49cc65b 100755 --- a/t/t6301-for-each-ref-errors.sh +++ b/t/t6301-for-each-ref-errors.sh @@ -4,7 +4,7 @@ test_description='for-each-ref errors for broken refs' . ./test-lib.sh -ZEROS=$_z40 +ZEROS=$ZERO_OID MISSING=abababababababababababababababababababab test_expect_success setup ' diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index d5255dd..818435f 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -5,6 +5,13 @@ test_description='basic git gc tests . ./test-lib.sh +test_expect_success 'setup' ' + # do not let the amount of physical memory affects gc + # behavior, make sure we always pack everything to one pack by + # default + git config gc.bigPackThreshold 2g +' + test_expect_success 'gc empty repository' ' git gc ' @@ -43,6 +50,31 @@ test_expect_success 'gc is not aborted due to a stale symref' ' ) ' +test_expect_success 'gc --keep-largest-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + test_commit one && + test_commit two && + test_commit three && + git gc && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 1 pack-list && + BASE_PACK=.git/objects/pack/pack-*.pack && + test_commit four && + git repack -d && + test_commit five && + git repack -d && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 3 pack-list && + git gc --keep-largest-pack && + ( cd .git/objects/pack && ls *.pack ) >pack-list && + test_line_count = 2 pack-list && + test_path_is_file $BASE_PACK && + git fsck + ) +' + test_expect_success 'auto gc with too many loose objects does not attempt to create bitmaps' ' test_config gc.auto 3 && test_config gc.autodetach false && diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 765cced..033871e 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -72,8 +72,7 @@ for repack in '' true; do ' test_expect_success "simulate time passing ($title)" ' - find .git/objects -type f | - xargs test-tool chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with old blob ($title)" ' @@ -103,8 +102,7 @@ for repack in '' true; do test_expect_success "abandon objects again ($title)" ' git reset --hard HEAD^ && - find .git/objects -type f | - xargs test-tool chmtime -v -86400 + test-tool chmtime --get -86400 $(find .git/objects -type f) ' test_expect_success "start writing new commit with same tree ($title)" ' diff --git a/t/t7001-mv.sh b/t/t7001-mv.sh index e96cbdb..cc3fd2b 100755 --- a/t/t7001-mv.sh +++ b/t/t7001-mv.sh @@ -495,7 +495,7 @@ test_expect_success 'moving a submodule in nested directories' ' test_cmp expect actual ' -test_expect_failure 'moving nested submodules' ' +test_expect_success 'moving nested submodules' ' git commit -am "cleanup commit" && mkdir sub_nested_nested && (cd sub_nested_nested && diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 2aac77a..d7b319e 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -363,7 +363,7 @@ test_expect_success 'tag -l <pattern> -l <pattern> works, as our buggy documenta ' test_expect_success 'listing tags in column' ' - COLUMNS=40 git tag -l --column=row >actual && + COLUMNS=41 git tag -l --column=row >actual && cat >expected <<\EOF && a1 aa1 cba t210 t211 v0.2.1 v1.0 v1.0.1 v1.1.3 @@ -1056,7 +1056,18 @@ test_expect_success GPG \ git tag -s -F sigblanknonlfile blanknonlfile-signed-tag && get_tag_msg blanknonlfile-signed-tag >actual && test_cmp expect actual && - git tag -v signed-tag + git tag -v blanknonlfile-signed-tag +' + +test_expect_success GPG 'signed tag with embedded PGP message' ' + cat >msg <<-\EOF && + -----BEGIN PGP MESSAGE----- + + this is not a real PGP message + -----END PGP MESSAGE----- + EOF + git tag -s -F msg confusing-pgp-message && + git tag -v confusing-pgp-message ' # messages with commented lines for signed tags: diff --git a/t/t7005-editor.sh b/t/t7005-editor.sh index 29e5043..b2ca77b 100755 --- a/t/t7005-editor.sh +++ b/t/t7005-editor.sh @@ -111,14 +111,8 @@ do ' done -if echo 'echo space > "$1"' > "e space.sh" -then - # FS supports spaces in filenames - test_set_prereq SPACES_IN_FILENAMES -fi - -test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' - +test_expect_success 'editor with a space' ' + echo "echo space >\$1" >"e space.sh" && chmod a+x "e space.sh" && GIT_EDITOR="./e\ space.sh" git commit --amend && test space = "$(git show -s --pretty=format:%s)" @@ -126,7 +120,7 @@ test_expect_success SPACES_IN_FILENAMES 'editor with a space' ' ' unset GIT_EDITOR -test_expect_success SPACES_IN_FILENAMES 'core.editor with a space' ' +test_expect_success 'core.editor with a space' ' git config core.editor \"./e\ space.sh\" && git commit --amend && diff --git a/t/t7009-filter-branch-null-sha1.sh b/t/t7009-filter-branch-null-sha1.sh index a8d9ec4..9ba9f24 100755 --- a/t/t7009-filter-branch-null-sha1.sh +++ b/t/t7009-filter-branch-null-sha1.sh @@ -12,7 +12,7 @@ test_expect_success 'setup: base commits' ' test_expect_success 'setup: a commit with a bogus null sha1 in the tree' ' { git ls-tree HEAD && - printf "160000 commit $_z40\\tbroken\\n" + printf "160000 commit $ZERO_OID\\tbroken\\n" } >broken-tree && echo "add broken entry" >msg && diff --git a/t/t7011-skip-worktree-reading.sh b/t/t7011-skip-worktree-reading.sh index 84f4145..37525ca 100755 --- a/t/t7011-skip-worktree-reading.sh +++ b/t/t7011-skip-worktree-reading.sh @@ -118,7 +118,7 @@ test_expect_success 'grep with skip-worktree file' ' test "$(git grep --no-ext-grep test)" = "1:test" ' -echo ":000000 100644 $_z40 $EMPTY_BLOB A 1" > expected +echo ":000000 100644 $ZERO_OID $EMPTY_BLOB A 1" > expected test_expect_success 'diff-index does not examine skip-worktree absent entries' ' setup_absent && git diff-index HEAD -- 1 > result && diff --git a/t/t7030-verify-tag.sh b/t/t7030-verify-tag.sh index b4b49ee..291a1e2 100755 --- a/t/t7030-verify-tag.sh +++ b/t/t7030-verify-tag.sh @@ -74,7 +74,7 @@ test_expect_success GPG 'verify and show signatures' ' test_expect_success GPG 'detect fudged signature' ' git cat-file tag seventh-signed >raw && - sed -e "s/seventh/7th forged/" raw >forged1 && + sed -e "/^tag / s/seventh/7th forged/" raw >forged1 && git hash-object -w -t tag forged1 >forged1.tag && test_must_fail git verify-tag $(cat forged1.tag) 2>actual1 && grep "BAD signature from" actual1 && diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index 8f79532..b9a86d3 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -46,11 +46,11 @@ test_expect_success 'before initial commit, things added' ' cat >expect <<-EOF && # branch.oid (initial) # branch.head master - 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a - 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b - 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x - 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y - 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_X file_x + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Y file_y + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Z file_z ? actual ? expect EOF @@ -63,11 +63,11 @@ test_expect_success 'before initial commit, things added (-z)' ' lf_to_nul >expect <<-EOF && # branch.oid (initial) # branch.head master - 1 A. N... 000000 100644 100644 $_z40 $OID_A dir1/file_a - 1 A. N... 000000 100644 100644 $_z40 $OID_B dir1/file_b - 1 A. N... 000000 100644 100644 $_z40 $OID_X file_x - 1 A. N... 000000 100644 100644 $_z40 $OID_Y file_y - 1 A. N... 000000 100644 100644 $_z40 $OID_Z file_z + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_A dir1/file_a + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_B dir1/file_b + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_X file_x + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Y file_y + 1 A. N... 000000 100644 100644 $ZERO_OID $OID_Z file_z ? actual ? expect EOF @@ -128,7 +128,7 @@ test_expect_success 'after first commit, stage existing changes' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z ? actual ? expect EOF @@ -145,7 +145,7 @@ test_expect_success 'rename causes 2 path lines' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y ? actual ? expect @@ -163,7 +163,7 @@ test_expect_success 'rename causes 2 path lines (-z)' ' # branch.oid $H0 # branch.head master 1 M. N... 100644 100644 100644 $OID_X $OID_X1 file_x - 1 D. N... 100644 000000 000000 $OID_Z $_z40 file_z + 1 D. N... 100644 000000 000000 $OID_Z $ZERO_OID file_z 2 R. N... 100644 100644 100644 $OID_Y $OID_Y R100 renamed_yQfile_y ? actual ? expect @@ -246,8 +246,8 @@ test_expect_success 'verify --intent-to-add output' ' git add --intent-to-add intent1.add intent2.add && cat >expect <<-EOF && - 1 .A N... 000000 000000 100644 $_z40 $_z40 intent1.add - 1 .A N... 000000 000000 100644 $_z40 $_z40 intent2.add + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID intent1.add + 1 .A N... 000000 000000 100644 $ZERO_OID $ZERO_OID intent2.add EOF git status --porcelain=v2 >actual && @@ -280,7 +280,7 @@ test_expect_success 'verify AA (add-add) conflict' ' cat >expect <<-EOF && # branch.oid $HM # branch.head AA_M - u AA N... 000000 100644 100644 100644 $_z40 $OID_AA_B $OID_AA_A conflict.txt + u AA N... 000000 100644 100644 100644 $ZERO_OID $OID_AA_B $OID_AA_A conflict.txt EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -373,7 +373,7 @@ test_expect_success 'verify upstream fields in branch header' ' ## Test upstream-gone case. Fake this by pointing origin/master at ## a non-existing commit. OLD=$(git rev-parse origin/master) && - NEW=$_z40 && + NEW=$ZERO_OID && mv .git/packed-refs .git/old-packed-refs && sed "s/$OLD/$NEW/g" <.git/old-packed-refs >.git/packed-refs && @@ -469,8 +469,8 @@ test_expect_success 'create and add submodule, submodule appears clean (A. S...) # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 A. S... 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 A. S... 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -494,8 +494,8 @@ test_expect_success 'untracked changes in added submodule (AM S..U)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S..U 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S..U 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -519,8 +519,8 @@ test_expect_success 'staged changes in added submodule (AM S.M.)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -546,8 +546,8 @@ test_expect_success 'staged and unstaged changes in added (AM S.M.)' ' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.M. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.M. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -573,8 +573,8 @@ test_expect_success 'staged and untracked changes in added submodule (AM S.MU)' # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM S.MU 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM S.MU 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && @@ -600,8 +600,8 @@ test_expect_success 'commit within the submodule appears as new commit in super # branch.head master # branch.upstream origin/master # branch.ab +0 -0 - 1 A. N... 000000 100644 100644 $_z40 $HMOD .gitmodules - 1 AM SC.. 000000 160000 160000 $_z40 $HSUB sub1 + 1 A. N... 000000 100644 100644 $ZERO_OID $HMOD .gitmodules + 1 AM SC.. 000000 160000 160000 $ZERO_OID $HSUB sub1 EOF git status --porcelain=v2 --branch --untracked-files=all >actual && diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 76c223c..ab9da61 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -65,7 +65,7 @@ test_expect_success setup ' test_expect_success "checkout from non-existing branch" ' git checkout -b delete-me master && - rm .git/refs/heads/delete-me && + git update-ref -d --no-deref refs/heads/delete-me && test refs/heads/delete-me = "$(git symbolic-ref HEAD)" && git checkout master && test refs/heads/master = "$(git symbolic-ref HEAD)" diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 1521044..812db13 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -126,6 +126,24 @@ test_expect_success 'submodule add' ' test_cmp empty untracked ' +test_expect_success 'setup parent and one repository' ' + test_create_repo parent && + test_commit -C parent one +' + +test_expect_success 'redirected submodule add does not show progress' ' + git -C addtest submodule add "file://$submodurl/parent" submod-redirected \ + 2>err && + ! grep % err && + test_i18ngrep ! "Checking connectivity" err +' + +test_expect_success 'redirected submodule add --progress does show progress' ' + git -C addtest submodule add --progress "file://$submodurl/parent" \ + submod-redirected-progress 2>err && \ + grep % err +' + test_expect_success 'submodule add to .gitignored path fails' ' ( cd addtest-ignore && diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index 6f083c4..9e0d317 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -65,7 +65,7 @@ test_expect_success 'setup a submodule tree' ' git commit -m "none" ) && git clone . recursivesuper && - ( cd recursivesuper + ( cd recursivesuper && git submodule add ../super super ) ' @@ -245,13 +245,13 @@ test_expect_success 'submodule update --remote should fetch upstream changes wit ( cd super && git submodule update --remote --force submodule && - git -C submodule log -1 --oneline >actual - git -C ../submodule log -1 --oneline master >expect + git -C submodule log -1 --oneline >actual && + git -C ../submodule log -1 --oneline master >expect && test_cmp expect actual && git checkout -b test-branch && git submodule update --remote --force submodule && - git -C submodule log -1 --oneline >actual - git -C ../submodule log -1 --oneline test-branch >expect + git -C submodule log -1 --oneline >actual && + git -C ../submodule log -1 --oneline test-branch >expect && test_cmp expect actual && git checkout master && git branch -d test-branch && @@ -891,7 +891,7 @@ test_expect_success 'submodule update properly revives a moved submodule' ' rm -rf submodule2 && mkdir -p "moved/sub module" && git update-index --add --cacheinfo 160000 $H "moved/sub module" && - git config -f .gitmodules submodule.submodule2.path "moved/sub module" + git config -f .gitmodules submodule.submodule2.path "moved/sub module" && git commit -am "post move" && git submodule update && git status | sed "s/$H2/XXX/" >actual && diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 6ba5daf..77729ac 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -82,16 +82,16 @@ test_expect_success 'test basic "submodule foreach" usage' ' cat >expect <<EOF Entering '../sub1' -$pwd/clone-foo1-../sub1-$sub1sha1 +$pwd/clone-foo1-sub1-../sub1-$sub1sha1 Entering '../sub3' -$pwd/clone-foo3-../sub3-$sub3sha1 +$pwd/clone-foo3-sub3-../sub3-$sub3sha1 EOF test_expect_success 'test "submodule foreach" from subdirectory' ' mkdir clone/sub && ( cd clone/sub && - git submodule foreach "echo \$toplevel-\$name-\$sm_path-\$sha1" >../../actual + git submodule foreach "echo \$toplevel-\$name-\$sm_path-\$displaypath-\$sha1" >../../actual ) && test_i18ncmp expect actual ' @@ -196,6 +196,38 @@ test_expect_success 'test messages from "foreach --recursive" from subdirectory' ) && test_i18ncmp expect actual ' +sub1sha1=$(cd clone2/sub1 && git rev-parse HEAD) +sub2sha1=$(cd clone2/sub2 && git rev-parse HEAD) +sub3sha1=$(cd clone2/sub3 && git rev-parse HEAD) +nested1sha1=$(cd clone2/nested1 && git rev-parse HEAD) +nested2sha1=$(cd clone2/nested1/nested2 && git rev-parse HEAD) +nested3sha1=$(cd clone2/nested1/nested2/nested3 && git rev-parse HEAD) +submodulesha1=$(cd clone2/nested1/nested2/nested3/submodule && git rev-parse HEAD) + +cat >expect <<EOF +Entering '../nested1' +toplevel: $pwd/clone2 name: nested1 path: nested1 displaypath: ../nested1 hash: $nested1sha1 +Entering '../nested1/nested2' +toplevel: $pwd/clone2/nested1 name: nested2 path: nested2 displaypath: ../nested1/nested2 hash: $nested2sha1 +Entering '../nested1/nested2/nested3' +toplevel: $pwd/clone2/nested1/nested2 name: nested3 path: nested3 displaypath: ../nested1/nested2/nested3 hash: $nested3sha1 +Entering '../nested1/nested2/nested3/submodule' +toplevel: $pwd/clone2/nested1/nested2/nested3 name: submodule path: submodule displaypath: ../nested1/nested2/nested3/submodule hash: $submodulesha1 +Entering '../sub1' +toplevel: $pwd/clone2 name: foo1 path: sub1 displaypath: ../sub1 hash: $sub1sha1 +Entering '../sub2' +toplevel: $pwd/clone2 name: foo2 path: sub2 displaypath: ../sub2 hash: $sub2sha1 +Entering '../sub3' +toplevel: $pwd/clone2 name: foo3 path: sub3 displaypath: ../sub3 hash: $sub3sha1 +EOF + +test_expect_success 'test "submodule foreach --recursive" from subdirectory' ' + ( + cd clone2/untracked && + git submodule foreach --recursive "echo toplevel: \$toplevel name: \$name path: \$sm_path displaypath: \$displaypath hash: \$sha1" >../../actual + ) && + test_i18ncmp expect actual +' cat > expect <<EOF nested1-nested1 diff --git a/t/t7408-submodule-reference.sh b/t/t7408-submodule-reference.sh index e159fc5..08d9add 100755 --- a/t/t7408-submodule-reference.sh +++ b/t/t7408-submodule-reference.sh @@ -59,6 +59,16 @@ test_expect_success 'submodule add --reference uses alternates' ' test_alternate_is_used super/.git/modules/sub/objects/info/alternates super/sub ' +test_expect_success 'submodule add --reference with --dissociate does not use alternates' ' + ( + cd super && + git submodule add --reference ../B --dissociate "file://$base_dir/A" sub-dissociate && + git commit -m B-super-added && + git repack -ad + ) && + test_path_is_missing super/.git/modules/sub-dissociate/objects/info/alternates +' + test_expect_success 'that reference gets used with add' ' ( cd super/sub && @@ -82,6 +92,13 @@ test_expect_success 'updating superproject keeps alternates' ' test_alternate_is_used super-clone/.git/modules/sub/objects/info/alternates super-clone/sub ' +test_expect_success 'updating superproject with --dissociate does not keep alternates' ' + test_when_finished "rm -rf super-clone" && + git clone super super-clone && + git -C super-clone submodule update --init --reference ../B --dissociate && + test_path_is_missing super-clone/.git/modules/sub/objects/info/alternates +' + test_expect_success 'submodules use alternates when cloning a superproject' ' test_when_finished "rm -rf super-clone" && git clone --reference super --recursive super super-clone && diff --git a/t/t7415-submodule-names.sh b/t/t7415-submodule-names.sh new file mode 100755 index 0000000..b68c5f5 --- /dev/null +++ b/t/t7415-submodule-names.sh @@ -0,0 +1,179 @@ +#!/bin/sh + +test_description='check handling of .. in submodule names + +Exercise the name-checking function on a variety of names, and then give a +real-world setup that confirms we catch this in practice. +' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-pack.sh + +test_expect_success 'check names' ' + cat >expect <<-\EOF && + valid + valid/with/paths + EOF + + git submodule--helper check-name >actual <<-\EOF && + valid + valid/with/paths + + ../foo + /../foo + ..\foo + \..\foo + foo/.. + foo/../ + foo\.. + foo\..\ + foo/../bar + EOF + + test_cmp expect actual +' + +test_expect_success 'create innocent subrepo' ' + git init innocent && + git -C innocent commit --allow-empty -m foo +' + +test_expect_success 'submodule add refuses invalid names' ' + test_must_fail \ + git submodule add --name ../../modules/evil "$PWD/innocent" evil +' + +test_expect_success 'add evil submodule' ' + git submodule add "$PWD/innocent" evil && + + mkdir modules && + cp -r .git/modules/evil modules && + write_script modules/evil/hooks/post-checkout <<-\EOF && + echo >&2 "RUNNING POST CHECKOUT" + EOF + + git config -f .gitmodules submodule.evil.update checkout && + git config -f .gitmodules --rename-section \ + submodule.evil submodule.../../modules/evil && + git add modules && + git commit -am evil +' + +# This step seems like it shouldn't be necessary, since the payload is +# contained entirely in the evil submodule. But due to the vagaries of the +# submodule code, checking out the evil module will fail unless ".git/modules" +# exists. Adding another submodule (with a name that sorts before "evil") is an +# easy way to make sure this is the case in the victim clone. +test_expect_success 'add other submodule' ' + git submodule add "$PWD/innocent" another-module && + git add another-module && + git commit -am another +' + +test_expect_success 'clone evil superproject' ' + git clone --recurse-submodules . victim >output 2>&1 && + ! grep "RUNNING POST CHECKOUT" output +' + +test_expect_success 'fsck detects evil superproject' ' + test_must_fail git fsck +' + +test_expect_success 'transfer.fsckObjects detects evil superproject (unpack)' ' + rm -rf dst.git && + git init --bare dst.git && + git -C dst.git config transfer.fsckObjects true && + test_must_fail git push dst.git HEAD +' + +test_expect_success 'transfer.fsckObjects detects evil superproject (index)' ' + rm -rf dst.git && + git init --bare dst.git && + git -C dst.git config transfer.fsckObjects true && + git -C dst.git config transfer.unpackLimit 1 && + test_must_fail git push dst.git HEAD +' + +# Normally our packs contain commits followed by trees followed by blobs. This +# reverses the order, which requires backtracking to find the context of a +# blob. We'll start with a fresh gitmodules-only tree to make it simpler. +test_expect_success 'create oddly ordered pack' ' + git checkout --orphan odd && + git rm -rf --cached . && + git add .gitmodules && + git commit -m odd && + { + pack_header 3 && + pack_obj $(git rev-parse HEAD:.gitmodules) && + pack_obj $(git rev-parse HEAD^{tree}) && + pack_obj $(git rev-parse HEAD) + } >odd.pack && + pack_trailer odd.pack +' + +test_expect_success 'transfer.fsckObjects handles odd pack (unpack)' ' + rm -rf dst.git && + git init --bare dst.git && + test_must_fail git -C dst.git unpack-objects --strict <odd.pack +' + +test_expect_success 'transfer.fsckObjects handles odd pack (index)' ' + rm -rf dst.git && + git init --bare dst.git && + test_must_fail git -C dst.git index-pack --strict --stdin <odd.pack +' + +test_expect_success 'index-pack --strict works for non-repo pack' ' + rm -rf dst.git && + git init --bare dst.git && + cp odd.pack dst.git && + test_must_fail git -C dst.git index-pack --strict odd.pack 2>output && + # Make sure we fail due to bad gitmodules content, not because we + # could not read the blob in the first place. + grep gitmodulesName output +' + +test_expect_success 'fsck detects symlinked .gitmodules file' ' + git init symlink && + ( + cd symlink && + + # Make the tree directly to avoid index restrictions. + # + # Because symlinks store the target as a blob, choose + # a pathname that could be parsed as a .gitmodules file + # to trick naive non-symlink-aware checking. + tricky="[foo]bar=true" && + content=$(git hash-object -w ../.gitmodules) && + target=$(printf "$tricky" | git hash-object -w --stdin) && + { + printf "100644 blob $content\t$tricky\n" && + printf "120000 blob $target\t.gitmodules\n" + } | git mktree && + + # Check not only that we fail, but that it is due to the + # symlink detector; this grep string comes from the config + # variable name and will not be translated. + test_must_fail git fsck 2>output && + grep gitmodulesSymlink output + ) +' + +test_expect_success 'fsck detects non-blob .gitmodules' ' + git init non-blob && + ( + cd non-blob && + + # As above, make the funny tree directly to avoid index + # restrictions. + mkdir subdir && + cp ../.gitmodules subdir/file && + git add subdir/file && + git commit -m ok && + git ls-tree HEAD | sed s/subdir/.gitmodules/ | git mktree && + + test_must_fail git fsck 2>output && + grep gitmodulesBlob output + ) +' + +test_done diff --git a/t/t7501-commit.sh b/t/t7501-commit.sh index fa61b1a..9dbbd01 100755 --- a/t/t7501-commit.sh +++ b/t/t7501-commit.sh @@ -52,6 +52,18 @@ test_expect_success PERL 'can use paths with --interactive' ' git reset --hard HEAD^ ' +test_expect_success 'removed files and relative paths' ' + test_when_finished "rm -rf foo" && + git init foo && + >foo/foo.txt && + git -C foo add foo.txt && + git -C foo commit -m first && + git -C foo rm foo.txt && + + mkdir -p foo/bar && + git -C foo/bar commit -m second ../foo.txt +' + test_expect_success 'using invalid commit with -C' ' test_must_fail git commit --allow-empty -C bogus ' diff --git a/t/t7506-status-submodule.sh b/t/t7506-status-submodule.sh index 9edf657..b4b74db 100755 --- a/t/t7506-status-submodule.sh +++ b/t/t7506-status-submodule.sh @@ -18,7 +18,7 @@ test_create_repo_with_commit () { } sanitize_output () { - sed -e "s/$_x40/HASH/" -e "s/$_x40/HASH/" output >output2 && + sed -e "s/$OID_REGEX/HASH/" -e "s/$OID_REGEX/HASH/" output >output2 && mv output2 output } diff --git a/t/t7508-status.sh b/t/t7508-status.sh index 7afadb1..e1f1129 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -1099,6 +1099,7 @@ EOF ' test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' ' + test_when_finished "chmod 775 .git" && ( chmod a-w .git && # make dir1/tracked stat-dirty @@ -1108,9 +1109,6 @@ test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' # make sure "status" succeeded without writing index out git diff-files | grep dir1/tracked ) - status=$? - chmod 775 .git - (exit $status) ' (cd sm && echo > bar && git add bar && git commit -q -m 'Add bar') && git add sm @@ -1674,10 +1672,10 @@ test_expect_success '"Initial commit" should not be noted in commit template' ' test_expect_success '--no-optional-locks prevents index update' ' test-tool chmtime =1234567890 .git/index && git --no-optional-locks status && - test-tool chmtime -v +0 .git/index >out && + test-tool chmtime --get .git/index >out && grep ^1234567890 out && git status && - test-tool chmtime -v +0 .git/index >out && + test-tool chmtime --get .git/index >out && ! grep ^1234567890 out ' diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 762135a..6e2015e 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -142,10 +142,9 @@ test_expect_success GPG 'show signed commit with signature' ' test_expect_success GPG 'detect fudged signature' ' git cat-file commit seventh-signed >raw && - - sed -e "s/seventh/7th forged/" raw >forged1 && + sed -e "s/^seventh/7th forged/" raw >forged1 && git hash-object -w -t commit forged1 >forged1.commit && - ! git verify-commit $(cat forged1.commit) && + test_must_fail git verify-commit $(cat forged1.commit) && git show --pretty=short --show-signature $(cat forged1.commit) >actual1 && grep "BAD signature from" actual1 && ! grep "Good signature from" actual1 @@ -156,7 +155,7 @@ test_expect_success GPG 'detect fudged signature with NUL' ' cat raw >forged2 && echo Qwik | tr "Q" "\000" >>forged2 && git hash-object -w -t commit forged2 >forged2.commit && - ! git verify-commit $(cat forged2.commit) && + test_must_fail git verify-commit $(cat forged2.commit) && git show --pretty=short --show-signature $(cat forged2.commit) >actual2 && grep "BAD signature from" actual2 && ! grep "Good signature from" actual2 diff --git a/t/t7525-status-rename.sh b/t/t7525-status-rename.sh new file mode 100755 index 0000000..ef8b1b3 --- /dev/null +++ b/t/t7525-status-rename.sh @@ -0,0 +1,113 @@ +#!/bin/sh + +test_description='git status rename detection options' + +. ./test-lib.sh + +test_expect_success 'setup' ' + echo 1 >original && + git add . && + git commit -m"Adding original file." && + mv original renamed && + echo 2 >> renamed && + git add . && + cat >.gitignore <<-\EOF + .gitignore + expect* + actual* + EOF +' + +test_expect_success 'status no-options' ' + git status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status --no-renames' ' + git status --no-renames >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames inherits from diff.renames false' ' + git -c diff.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames inherits from diff.renames true' ' + git -c diff.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status.renames overrides diff.renames false' ' + git -c diff.renames=true -c status.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status.renames overrides from diff.renames true' ' + git -c diff.renames=false -c status.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status status.renames=false' ' + git -c status.renames=false status >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status status.renames=true' ' + git -c status.renames=true status >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'commit honors status.renames=false' ' + git -c status.renames=false commit --dry-run >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'commit honors status.renames=true' ' + git -c status.renames=true commit --dry-run >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'status config overridden' ' + git -c status.renames=true status --no-renames >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status score=100%' ' + git status -M=100% >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual && + + git status --find-rename=100% >actual && + test_i18ngrep "deleted:" actual && + test_i18ngrep "new file:" actual +' + +test_expect_success 'status score=01%' ' + git status -M=01% >actual && + test_i18ngrep "renamed:" actual && + + git status --find-rename=01% >actual && + test_i18ngrep "renamed:" actual +' + +test_expect_success 'copies not overridden by find-rename' ' + cp renamed copy && + git add copy && + + git -c status.renames=copies status -M=01% >actual && + test_i18ngrep "copied:" actual && + test_i18ngrep "renamed:" actual && + + git -c status.renames=copies status --find-rename=01% >actual && + test_i18ngrep "copied:" actual && + test_i18ngrep "renamed:" actual +' + +test_done diff --git a/t/t7607-merge-overwrite.sh b/t/t7607-merge-overwrite.sh index 9c422bc..dd8ab7e 100755 --- a/t/t7607-merge-overwrite.sh +++ b/t/t7607-merge-overwrite.sh @@ -92,7 +92,7 @@ test_expect_success 'will not overwrite removed file with staged changes' ' test_cmp important c1.c ' -test_expect_failure 'will not overwrite unstaged changes in renamed file' ' +test_expect_success 'will not overwrite unstaged changes in renamed file' ' git reset --hard c1 && git mv c1.c other.c && git commit -m rename && diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index e797c74..e2b1df8 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -23,7 +23,7 @@ test_expect_success GPG 'create signed commits' ' echo 3 >bar && git add bar && test_tick && git commit -S -m "bad on side" && git cat-file commit side-bad >raw && - sed -e "s/bad/forged bad/" raw >forged && + sed -e "s/^bad/forged bad/" raw >forged && git hash-object -w -t commit forged >forged.commit && git checkout initial && diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 6061a04..6162e2a 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -4,6 +4,12 @@ test_description='git repack works correctly' . ./test-lib.sh +commit_and_pack() { + test_commit "$@" >/dev/null && + SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && + echo pack-${SHA1}.pack +} + test_expect_success 'objects in packs marked .keep are not repacked' ' echo content1 > file1 && echo content2 > file2 && @@ -194,7 +200,26 @@ test_expect_success 'objects made unreachable by grafts only are kept' ' git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && git repack -a -d && git cat-file -t $H1 - ' +' + +test_expect_success 'repack --keep-pack' ' + test_create_repo keep-pack && + ( + cd keep-pack && + P1=$(commit_and_pack 1) && + P2=$(commit_and_pack 2) && + P3=$(commit_and_pack 3) && + P4=$(commit_and_pack 4) && + ls .git/objects/pack/*.pack >old-counts && + test_line_count = 4 old-counts && + git repack -a -d --keep-pack $P1 --keep-pack $P4 && + ls .git/objects/pack/*.pack >new-counts && + grep -q $P1 new-counts && + grep -q $P4 new-counts && + test_line_count = 3 new-counts && + git fsck + ) +' test_done diff --git a/t/t7701-repack-unpack-unreachable.sh b/t/t7701-repack-unpack-unreachable.sh index 8a586ab..48261ba 100755 --- a/t/t7701-repack-unpack-unreachable.sh +++ b/t/t7701-repack-unpack-unreachable.sh @@ -55,8 +55,8 @@ test_expect_success '-A with -d option leaves unreachable objects unpacked' ' compare_mtimes () { - read tref rest && - while read t rest; do + read tref && + while read t; do test "$tref" = "$t" || return 1 done } @@ -90,7 +90,7 @@ test_expect_success 'unpacked objects receive timestamp of pack file' ' tmppack=".git/objects/pack/tmp_pack" && ln "$packfile" "$tmppack" && git repack -A -l -d && - test-tool chmtime -v +0 "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ + test-tool chmtime --get "$tmppack" "$fsha1path" "$csha1path" "$tsha1path" \ > mtimes && compare_mtimes < mtimes ' diff --git a/t/t8012-blame-colors.sh b/t/t8012-blame-colors.sh new file mode 100755 index 0000000..ed38f74 --- /dev/null +++ b/t/t8012-blame-colors.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='colored git blame' +. ./test-lib.sh + +PROG='git blame -c' +. "$TEST_DIRECTORY"/annotate-tests.sh + +test_expect_success 'colored blame colors contiguous lines' ' + git -c color.blame.repeatedLines=yellow blame --color-lines --abbrev=12 hello.c >actual.raw && + git -c color.blame.repeatedLines=yellow -c blame.coloring=repeatedLines blame --abbrev=12 hello.c >actual.raw.2 && + test_cmp actual.raw actual.raw.2 && + test_decode_color <actual.raw >actual && + grep "<YELLOW>" <actual >darkened && + grep "(F" darkened > F.expect && + grep "(H" darkened > H.expect && + test_line_count = 2 F.expect && + test_line_count = 3 H.expect +' + +test_expect_success 'color by age consistently colors old code' ' + git blame --color-by-age hello.c >actual.raw && + git -c blame.coloring=highlightRecent blame hello.c >actual.raw.2 && + test_cmp actual.raw actual.raw.2 && + test_decode_color <actual.raw >actual && + grep "<BLUE>" <actual >colored && + test_line_count = 10 colored +' + +test_expect_success 'blame color by age: new code is different' ' + cat >>hello.c <<-EOF && + void qfunc(); + EOF + git add hello.c && + GIT_AUTHOR_DATE="" git commit -m "new commit" && + + git -c color.blame.highlightRecent="yellow,1 month ago, cyan" blame --color-by-age hello.c >actual.raw && + test_decode_color <actual.raw >actual && + + grep "<YELLOW>" <actual >colored && + test_line_count = 10 colored && + + grep "<CYAN>" <actual >colored && + test_line_count = 1 colored && + grep qfunc colored +' + +test_done diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 8eaaca6..0b20b07 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -473,7 +473,7 @@ test_expect_failure 'change file mode but keep old content' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && git show HEAD:greeting >actual.blob && git show HEAD^:greeting >actual.target && @@ -573,7 +573,7 @@ test_expect_success 'NUL in log message, file content, and property name' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && { git cat-file commit HEAD | nul_to_q && @@ -659,7 +659,7 @@ test_expect_success 'change file mode and reiterate content' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && git show HEAD:greeting >actual.blob && git show HEAD^:greeting >actual.target && @@ -792,7 +792,7 @@ test_expect_success 'property deltas supported' ' { git rev-list HEAD | git diff-tree --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -846,7 +846,7 @@ test_expect_success 'properties on /' ' { git rev-list HEAD | git diff-tree --root --always --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -931,7 +931,7 @@ test_expect_success 'deltas for typechange' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual ' @@ -1030,7 +1030,7 @@ test_expect_success 'deltas need not consume the whole preimage' ' { git rev-list HEAD | git diff-tree --root --stdin | - sed "s/$_x40/OBJID/g" + sed "s/$OID_REGEX/OBJID/g" } >actual && test_cmp expect actual && git show HEAD:postimage >actual.3 && diff --git a/t/t9104-git-svn-follow-parent.sh b/t/t9104-git-svn-follow-parent.sh index a735fa3..5e0ad19 100755 --- a/t/t9104-git-svn-follow-parent.sh +++ b/t/t9104-git-svn-follow-parent.sh @@ -215,7 +215,10 @@ test_expect_success "multi-fetch continues to work" " " test_expect_success "multi-fetch works off a 'clean' repository" ' - rm -r "$GIT_DIR/svn" "$GIT_DIR/refs/remotes" "$GIT_DIR/logs" && + rm -rf "$GIT_DIR/svn" && + git for-each-ref --format="option no-deref%0adelete %(refname)" refs/remotes | + git update-ref --stdin && + git reflog expire --all --expire=all && mkdir "$GIT_DIR/svn" && git svn multi-fetch ' diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index dc79df7..9e7f962 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -1185,7 +1185,7 @@ test_expect_success PIPE 'N: empty directory reads as missing' ' test_cmp expect.response response && git rev-list read-empty | git diff-tree -r --root --stdin | - sed "s/$_x40/OBJNAME/g" >actual && + sed "s/$OID_REGEX/OBJNAME/g" >actual && test_cmp expect actual ' @@ -1271,7 +1271,7 @@ test_expect_success 'N: delete directory by copying' ' git fast-import <input && git rev-list N-delete | git diff-tree -r --stdin --root --always | - sed -e "s/$_x40/OBJID/g" >actual && + sed -e "s/$OID_REGEX/OBJID/g" >actual && test_cmp expect actual ' @@ -2602,7 +2602,7 @@ test_expect_success 'R: terminating "done" within commit' ' EOF git rev-list done-ends | git diff-tree -r --stdin --root --always | - sed -e "s/$_x40/OBJID/g" >actual && + sed -e "s/$OID_REGEX/OBJID/g" >actual && test_cmp expect actual ' diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index d5679ff..6a392e8 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -538,4 +538,22 @@ test_expect_success 'when using -C, do not declare copy when source of copy is a test_cmp expected actual ' +test_expect_success 'merge commit gets exported with --import-marks' ' + test_create_repo merging && + ( + cd merging && + test_commit initial && + git checkout -b topic && + test_commit on-topic && + git checkout master && + test_commit on-master && + test_tick && + git merge --no-ff -m Yeah topic && + + echo ":1 $(git rev-parse HEAD^^)" >marks && + git fast-export --import-marks=marks master >out && + grep Yeah out + ) +' + test_done diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 71cae28..2325599 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -155,6 +155,46 @@ test_expect_success 'allow submit from branch with same revision but different n ) ' +# make two commits, but tell it to apply only one + +test_expect_success 'submit --commit one' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + test_commit "file9" && + test_commit "file10" && + git config git-p4.skipSubmitEdit true && + git p4 submit --commit HEAD + ) && + ( + cd "$cli" && + test_path_is_missing "file9.t" && + test_path_is_file "file10.t" + ) +' + +# make three commits, but tell it to apply only range + +test_expect_success 'submit --commit range' ' + test_when_finished cleanup_git && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + test_commit "file11" && + test_commit "file12" && + test_commit "file13" && + git config git-p4.skipSubmitEdit true && + git p4 submit --commit HEAD~2..HEAD + ) && + ( + cd "$cli" && + test_path_is_missing "file11.t" && + test_path_is_file "file12.t" && + test_path_is_file "file13.t" + ) +' + # # Basic submit tests, the five handled cases # diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh index 8840a18..ce7cb22 100755 --- a/t/t9818-git-p4-block.sh +++ b/t/t9818-git-p4-block.sh @@ -129,6 +129,7 @@ test_expect_success 'Create a repo with multiple depot paths' ' ' test_expect_success 'Clone repo with multiple depot paths' ' + test_when_finished cleanup_git && ( cd "$git" && git p4 clone --changes-block-size=4 //depot/pathA@all //depot/pathB@all \ @@ -138,6 +139,13 @@ test_expect_success 'Clone repo with multiple depot paths' ' ) ' +test_expect_success 'Clone repo with self-sizing block size' ' + test_when_finished cleanup_git && + git p4 clone --changes-block-size=1000000 //depot@all --destination="$git" && + git -C "$git" log --oneline >log && + test_line_count \> 10 log +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9832-unshelve.sh b/t/t9832-unshelve.sh new file mode 100755 index 0000000..48ec767 --- /dev/null +++ b/t/t9832-unshelve.sh @@ -0,0 +1,138 @@ +#!/bin/sh + +last_shelved_change () { + p4 changes -s shelved -m1 | cut -d " " -f 2 +} + +test_description='git p4 unshelve' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'init depot' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "change 1" && + : >file_to_delete && + p4 add file_to_delete && + p4 submit -d "file to delete" + ) +' + +test_expect_success 'initial clone' ' + git p4 clone --dest="$git" //depot/@all +' + +test_expect_success 'create shelved changelist' ' + ( + cd "$cli" && + p4 edit file1 && + echo "a change" >>file1 && + echo "new file" >file2 && + p4 add file2 && + p4 delete file_to_delete && + p4 opened && + p4 shelve -i <<EOF +Change: new +Description: + Test commit + + Further description +Files: + //depot/file1 + //depot/file2 + //depot/file_to_delete +EOF + + ) && + ( + cd "$git" && + change=$(last_shelved_change) && + git p4 unshelve $change && + git show refs/remotes/p4/unshelved/$change | grep -q "Further description" && + git cherry-pick refs/remotes/p4/unshelved/$change && + test_path_is_file file2 && + test_cmp file1 "$cli"/file1 && + test_cmp file2 "$cli"/file2 && + test_path_is_missing file_to_delete + ) +' + +test_expect_success 'update shelved changelist and re-unshelve' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + change=$(last_shelved_change) && + echo "file3" >file3 && + p4 add -c $change file3 && + p4 shelve -i -r <<EOF && +Change: $change +Description: + Test commit + + Further description +Files: + //depot/file1 + //depot/file2 + //depot/file3 + //depot/file_to_delete +EOF + p4 describe $change + ) && + ( + cd "$git" && + change=$(last_shelved_change) && + git p4 unshelve $change && + git diff refs/remotes/p4/unshelved/$change.0 refs/remotes/p4/unshelved/$change | grep -q file3 + ) +' + +# This is the tricky case where the shelved changelist base revision doesn't +# match git-p4's idea of the base revision +# +# We will attempt to unshelve a change that is based on a change one commit +# ahead of p4/master + +test_expect_success 'create shelved changelist based on p4 change ahead of p4/master' ' + git p4 clone --dest="$git" //depot/@all && + ( + cd "$cli" && + p4 revert ... && + p4 edit file1 && + echo "foo" >>file1 && + p4 submit -d "change:foo" && + p4 edit file1 && + echo "bar" >>file1 && + p4 shelve -i <<EOF && +Change: new +Description: + Change to be unshelved +Files: + //depot/file1 +EOF + change=$(last_shelved_change) && + p4 describe -S $change | grep -q "Change to be unshelved" + ) +' + +# Now try to unshelve it. git-p4 should refuse to do so. +test_expect_success 'try to unshelve the change' ' + test_when_finished cleanup_git && + ( + change=$(last_shelved_change) && + cd "$git" && + test_must_fail git p4 unshelve $change 2>out.txt && + grep -q "cannot unshelve" out.txt + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9833-errors.sh b/t/t9833-errors.sh new file mode 100755 index 0000000..9ba892d --- /dev/null +++ b/t/t9833-errors.sh @@ -0,0 +1,78 @@ +#!/bin/sh + +test_description='git p4 errors' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'add p4 files' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file1" + ) +' + +# after this test, the default user requires a password +test_expect_success 'error handling' ' + git p4 clone --dest="$git" //depot@all && + ( + cd "$git" && + P4PORT=: test_must_fail git p4 submit 2>errmsg + ) && + p4 passwd -P newpassword && + ( + P4PASSWD=badpassword test_must_fail git p4 clone //depot/foo 2>errmsg && + grep -q "failure accessing depot.*P4PASSWD" errmsg + ) +' + +test_expect_success 'ticket logged out' ' + P4TICKETS="$cli/tickets" && + echo "newpassword" | p4 login && + ( + cd "$git" && + test_commit "ticket-auth-check" && + p4 logout && + test_must_fail git p4 submit 2>errmsg && + grep -q "failure accessing depot" errmsg + ) +' + +test_expect_success 'create group with short ticket expiry' ' + P4TICKETS="$cli/tickets" && + echo "newpassword" | p4 login && + p4_add_user short_expiry_user && + p4 -u short_expiry_user passwd -P password && + p4 group -i <<-EOF && + Group: testgroup + Timeout: 3 + Users: short_expiry_user + EOF + + p4 users | grep short_expiry_user +' + +test_expect_success 'git operation with expired ticket' ' + P4TICKETS="$cli/tickets" && + P4USER=short_expiry_user && + echo "password" | p4 login && + ( + cd "$git" && + git p4 sync && + sleep 5 && + test_must_fail git p4 sync 2>errmsg && + grep "failure accessing depot" errmsg + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 1b34caa..3b3a7b6 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -13,7 +13,7 @@ complete () return 0 } -# Be careful when updating this list: +# Be careful when updating these lists: # # (1) The build tree may have build artifact from different branch, or # the user's $PATH may have a random executable that may begin @@ -30,7 +30,8 @@ complete () # completion for "git <TAB>", and a plumbing is excluded. "add", # "filter-branch" and "ls-files" are listed for this. -GIT_TESTING_COMMAND_COMPLETION='add checkout check-attr filter-branch ls-files' +GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr filter-branch ls-files' +GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout filter-branch' . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" @@ -84,10 +85,11 @@ test_completion () then printf '%s\n' "$2" >expected else - sed -e 's/Z$//' >expected + sed -e 's/Z$//' |sort >expected fi && run_completion "$1" && - test_cmp expected out + sort out >out_sorted && + test_cmp expected out_sorted } # Test __gitcomp. @@ -179,7 +181,7 @@ test_expect_success '__git_find_repo_path - cwd is a .git directory' ' test_expect_success '__git_find_repo_path - parent is a .git directory' ' echo "$ROOT/.git" >expected && ( - cd .git/refs/heads && + cd .git/objects && __git_find_repo_path && echo "$__git_repo_path" >"$actual" ) && @@ -400,6 +402,46 @@ test_expect_success '__gitdir - remote as argument' ' test_cmp expected "$actual" ' + +test_expect_success '__git_dequote - plain unquoted word' ' + __git_dequote unquoted-word && + verbose test unquoted-word = "$dequoted_word" +' + +# input: b\a\c\k\'\\\"s\l\a\s\h\es +# expected: back'\"slashes +test_expect_success '__git_dequote - backslash escaped' ' + __git_dequote "b\a\c\k\\'\''\\\\\\\"s\l\a\s\h\es" && + verbose test "back'\''\\\"slashes" = "$dequoted_word" +' + +# input: sin'gle\' '"quo'ted +# expected: single\ "quoted +test_expect_success '__git_dequote - single quoted' ' + __git_dequote "'"sin'gle\\\\' '\\\"quo'ted"'" && + verbose test '\''single\ "quoted'\'' = "$dequoted_word" +' + +# input: dou"ble\\" "\"\quot"ed +# expected: double\ "\quoted +test_expect_success '__git_dequote - double quoted' ' + __git_dequote '\''dou"ble\\" "\"\quot"ed'\'' && + verbose test '\''double\ "\quoted'\'' = "$dequoted_word" +' + +# input: 'open single quote +test_expect_success '__git_dequote - open single quote' ' + __git_dequote "'\''open single quote" && + verbose test "open single quote" = "$dequoted_word" +' + +# input: "open double quote +test_expect_success '__git_dequote - open double quote' ' + __git_dequote "\"open double quote" && + verbose test "open double quote" = "$dequoted_word" +' + + test_expect_success '__gitcomp_direct - puts everything into COMPREPLY as-is' ' sed -e "s/Z$//g" >expected <<-EOF && with-trailing-space Z @@ -459,6 +501,42 @@ test_expect_success '__gitcomp - suffix' ' EOF ' +test_expect_success '__gitcomp - ignore optional negative options' ' + test_gitcomp "--" "--abc --def --no-one -- --no-two" <<-\EOF + --abc Z + --def Z + --no-one Z + --no-... Z + EOF +' + +test_expect_success '__gitcomp - ignore/narrow optional negative options' ' + test_gitcomp "--a" "--abc --abcdef --no-one -- --no-two" <<-\EOF + --abc Z + --abcdef Z + EOF +' + +test_expect_success '__gitcomp - ignore/narrow optional negative options' ' + test_gitcomp "--n" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + --no-... Z + EOF +' + +test_expect_success '__gitcomp - expand all negative options' ' + test_gitcomp "--no-" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + --no-two Z + EOF +' + +test_expect_success '__gitcomp - expand/narrow all negative options' ' + test_gitcomp "--no-o" "--abc --def --no-one -- --no-two" <<-\EOF + --no-one Z + EOF +' + test_expect_success '__gitcomp - doesnt fail because of invalid variable name' ' __gitcomp "$invalid_variable_name" ' @@ -1168,6 +1246,124 @@ test_expect_success 'teardown after ref completion' ' git remote remove other ' + +test_path_completion () +{ + test $# = 2 || error "bug in the test script: not 2 parameters to test_path_completion" + + local cur="$1" expected="$2" + echo "$expected" >expected && + ( + # In the following tests calling this function we only + # care about how __git_complete_index_file() deals with + # unusual characters in path names. By requesting only + # untracked files we dont have to bother adding any + # paths to the index in those tests. + __git_complete_index_file --others && + print_comp + ) && + test_cmp expected out +} + +test_expect_success 'setup for path completion tests' ' + mkdir simple-dir \ + "spaces in dir" \ + árvíztűrő && + touch simple-dir/simple-file \ + "spaces in dir/spaces in file" \ + "árvíztűrő/Сайн яваарай" && + if test_have_prereq !MINGW && + mkdir BS\\dir \ + '$'separators\034in\035dir'' && + touch BS\\dir/DQ\"file \ + '$'separators\034in\035dir/sep\036in\037file'' + then + test_set_prereq FUNNYNAMES + else + rm -rf BS\\dir '$'separators\034in\035dir'' + fi +' + +test_expect_success '__git_complete_index_file - simple' ' + test_path_completion simple simple-dir && # Bash is supposed to + # add the trailing /. + test_path_completion simple-dir/simple simple-dir/simple-file +' + +test_expect_success \ + '__git_complete_index_file - escaped characters on cmdline' ' + test_path_completion spac "spaces in dir" && # Bash will turn this + # into "spaces\ in\ dir" + test_path_completion "spaces\\ i" \ + "spaces in dir" && + test_path_completion "spaces\\ in\\ dir/s" \ + "spaces in dir/spaces in file" && + test_path_completion "spaces\\ in\\ dir/spaces\\ i" \ + "spaces in dir/spaces in file" +' + +test_expect_success \ + '__git_complete_index_file - quoted characters on cmdline' ' + # Testing with an opening but without a corresponding closing + # double quote is important. + test_path_completion \"spac "spaces in dir" && + test_path_completion "\"spaces i" \ + "spaces in dir" && + test_path_completion "\"spaces in dir/s" \ + "spaces in dir/spaces in file" && + test_path_completion "\"spaces in dir/spaces i" \ + "spaces in dir/spaces in file" +' + +test_expect_success '__git_complete_index_file - UTF-8 in ls-files output' ' + test_path_completion á árvíztűrő && + test_path_completion árvíztűrő/С "árvíztűrő/Сайн яваарай" +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - C-style escapes in ls-files output' ' + test_path_completion BS \ + BS\\dir && + test_path_completion BS\\\\d \ + BS\\dir && + test_path_completion BS\\\\dir/DQ \ + BS\\dir/DQ\"file && + test_path_completion BS\\\\dir/DQ\\\"f \ + BS\\dir/DQ\"file +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - \nnn-escaped characters in ls-files output' ' + test_path_completion sep '$'separators\034in\035dir'' && + test_path_completion '$'separators\034i'' \ + '$'separators\034in\035dir'' && + test_path_completion '$'separators\034in\035dir/sep'' \ + '$'separators\034in\035dir/sep\036in\037file'' && + test_path_completion '$'separators\034in\035dir/sep\036i'' \ + '$'separators\034in\035dir/sep\036in\037file'' +' + +test_expect_success FUNNYNAMES \ + '__git_complete_index_file - removing repeated quoted path components' ' + test_when_finished rm -r repeated-quoted && + mkdir repeated-quoted && # A directory whose name in itself + # would not be quoted ... + >repeated-quoted/0-file && + >repeated-quoted/1\"file && # ... but here the file makes the + # dirname quoted ... + >repeated-quoted/2-file && + >repeated-quoted/3\"file && # ... and here, too. + + # Still, we shold only list the directory name only once. + test_path_completion repeated repeated-quoted +' + +test_expect_success 'teardown after path completion tests' ' + rm -rf simple-dir "spaces in dir" árvíztűrő \ + BS\\dir '$'separators\034in\035dir'' +' + + test_expect_success '__git_get_config_variables' ' cat >expect <<-EOF && name-1 @@ -1191,17 +1387,6 @@ test_expect_success '__git_pretty_aliases' ' test_cmp expect actual ' -test_expect_success '__git_aliases' ' - cat >expect <<-EOF && - ci - co - EOF - test_config alias.ci commit && - test_config alias.co checkout && - __git_aliases >actual && - test_cmp expect actual -' - test_expect_success 'basic' ' run_completion "git " && # built-in @@ -1249,8 +1434,8 @@ test_expect_success 'double dash "git checkout"' ' --ignore-other-worktrees Z --recurse-submodules Z --progress Z - --no-track Z - --no-recurse-submodules Z + --no-quiet Z + --no-... Z EOF ' @@ -1365,6 +1550,7 @@ test_expect_success 'complete files' ' echo "expected" > .gitignore && echo "out" >> .gitignore && + echo "out_sorted" >> .gitignore && git add .gitignore && test_completion "git commit " ".gitignore" && @@ -1457,6 +1643,7 @@ test_expect_success 'completion used <cmd> completion for alias: !f() { : git <c test_expect_success 'completion without explicit _git_xxx function' ' test_completion "git version --" <<-\EOF --build-options Z + --no-build-options Z EOF ' @@ -1510,13 +1697,6 @@ test_expect_success 'sourcing the completion script clears cached commands' ' verbose test -z "$__git_all_commands" ' -test_expect_success 'sourcing the completion script clears cached porcelain commands' ' - __git_compute_porcelain_commands && - verbose test -n "$__git_porcelain_commands" && - . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && - verbose test -z "$__git_porcelain_commands" -' - test_expect_success !GETTEXT_POISON 'sourcing the completion script clears cached merge strategies' ' __git_compute_merge_strategies && verbose test -n "$__git_merge_strategies" && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 8f5c811..c3b89ae 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -148,7 +148,7 @@ test_expect_success 'prompt - inside .git directory' ' test_expect_success 'prompt - deep inside .git directory' ' printf " (GIT_DIR!)" >expected && ( - cd .git/refs/heads && + cd .git/objects && __git_ps1 >"$actual" ) && test_cmp expected "$actual" diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 7d620bf..2b2181d 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -145,12 +145,28 @@ test_pause () { "$SHELL_PATH" <&6 >&5 2>&7 } -# Wrap git in gdb. Adding this to a command can make it easier to -# understand what is going on in a failing test. +# Wrap git with a debugger. Adding this to a command can make it easier +# to understand what is going on in a failing test. # -# Example: "debug git checkout master". +# Examples: +# debug git checkout master +# debug --debugger=nemiver git $ARGS +# debug -d "valgrind --tool=memcheck --track-origins=yes" git $ARGS debug () { - GIT_TEST_GDB=1 "$@" <&6 >&5 2>&7 + case "$1" in + -d) + GIT_DEBUGGER="$2" && + shift 2 + ;; + --debugger=*) + GIT_DEBUGGER="${1#*=}" && + shift 1 + ;; + *) + GIT_DEBUGGER=1 + ;; + esac && + GIT_DEBUGGER="${GIT_DEBUGGER}" "$@" <&6 >&5 2>&7 } # Call test_commit with the arguments @@ -278,8 +294,20 @@ write_script () { # The single parameter is the prerequisite tag (a simple word, in all # capital letters by convention). +test_unset_prereq () { + ! test_have_prereq "$1" || + satisfied_prereq="${satisfied_prereq% $1 *} ${satisfied_prereq#* $1 }" +} + test_set_prereq () { - satisfied_prereq="$satisfied_prereq$1 " + case "$1" in + !*) + test_unset_prereq "${1#!}" + ;; + *) + satisfied_prereq="$satisfied_prereq$1 " + ;; + esac } satisfied_prereq=" " lazily_testable_prereq= lazily_tested_prereq= diff --git a/t/test-lib.sh b/t/test-lib.sh index 483c8d6..2831570 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -184,6 +184,8 @@ _x40="$_x35$_x05" # Zero SHA-1 _z40=0000000000000000000000000000000000000000 +OID_REGEX="$_x40" +ZERO_OID=$_z40 EMPTY_TREE=4b825dc642cb6eb9a060e54bf8d69288fbee4904 EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 @@ -195,7 +197,7 @@ LF=' # when case-folding filenames u200c=$(printf '\342\200\214') -export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB +export _x05 _x35 _x40 _z40 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX # Each test should start with something like this, after copyright notices: # @@ -1106,12 +1108,7 @@ test_lazy_prereq UTF8_NFD_TO_NFC ' auml=$(printf "\303\244") aumlcdiar=$(printf "\141\314\210") >"$auml" && - case "$(echo *)" in - "$aumlcdiar") - true ;; - *) - false ;; - esac + test -f "$aumlcdiar" ' test_lazy_prereq AUTOIDENT ' @@ -1208,3 +1205,14 @@ test_lazy_prereq LONG_IS_64BIT ' test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit' test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit' + +test_lazy_prereq CURL ' + curl --version +' + +# SHA1 is a test if the hash algorithm in use is SHA-1. This is both for tests +# which will not work with other hash algorithms and tests that work but don't +# test anything meaningful (e.g. special values which cause short collisions). +test_lazy_prereq SHA1 ' + test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +' |