diff options
Diffstat (limited to 't')
555 files changed, 30820 insertions, 7215 deletions
diff --git a/t/.gitignore b/t/.gitignore index 348715f..91cf577 100644 --- a/t/.gitignore +++ b/t/.gitignore @@ -2,3 +2,4 @@ /test-results /.prove /chainlinttmp +/out/ @@ -170,6 +170,15 @@ appropriately before running "make". implied by other options like --valgrind and GIT_TEST_INSTALLED. +--no-bin-wrappers:: + By default, the test suite uses the wrappers in + `../bin-wrappers/` to execute `git` and friends. With this option, + `../git` and friends are run directly. This is not recommended + in general, as the wrappers contain safeguards to ensure that no + files from an installed Git are used, but can speed up test runs + especially on platforms where running shell scripts is expensive + (most notably, Windows). + --root=<directory>:: Create "trash" directories used to store all temporary data during testing under <directory>, instead of the t/ directory. @@ -186,6 +195,29 @@ appropriately before running "make". this feature by setting the GIT_TEST_CHAIN_LINT environment variable to "1" or "0", respectively. +--stress:: + Run the test script repeatedly in multiple parallel jobs until + one of them fails. Useful for reproducing rare failures in + flaky tests. The number of parallel jobs is, in order of + precedence: the value of the GIT_TEST_STRESS_LOAD + environment variable, or twice the number of available + processors (as shown by the 'getconf' utility), or 8. + Implies `--verbose -x --immediate` to get the most information + about the failure. Note that the verbose output of each test + job is saved to 't/test-results/$TEST_NAME.stress-<nr>.out', + and only the output of the failed test job is shown on the + terminal. The names of the trash directories get a + '.stress-<nr>' suffix, and the trash directory of the failed + test job is renamed to end with a '.stress-failed' suffix. + +--stress-jobs=<N>:: + Override the number of parallel jobs. Implies `--stress`. + +--stress-limit=<N>:: + When combined with --stress run the test script repeatedly + this many times in each of the parallel jobs or until one of + them fails, whichever comes first. Implies `--stress`. + You can also set the GIT_TEST_INSTALLED environment variable to the bindir of an existing git installation to test that installation. You still need to have built this git sandbox, from which various @@ -302,15 +334,27 @@ that cannot be easily covered by a few specific test cases. These could be enabled by running the test suite with correct GIT_TEST_ environment set. -GIT_TEST_GETTEXT_POISON=<non-empty?> turns all strings marked for -translation into gibberish if non-empty (think "test -n"). Used for -spotting those tests that need to be marked with a C_LOCALE_OUTPUT -prerequisite when adding more strings for translation. See "Testing -marked strings" in po/README for details. +GIT_TEST_FAIL_PREREQS=<boolean> fails all prerequisites. This is +useful for discovering issues with the tests where say a later test +implicitly depends on an optional earlier test. + +There's a "FAIL_PREREQS" prerequisite that can be used to test for +whether this mode is active, and e.g. skip some tests that are hard to +refactor to deal with it. The "SYMLINKS" prerequisite is currently +excluded as so much relies on it, but this might change in the future. + +GIT_TEST_GETTEXT_POISON=<boolean> turns all strings marked for +translation into gibberish if true. Used for spotting those tests that +need to be marked with a C_LOCALE_OUTPUT prerequisite when adding more +strings for translation. See "Testing marked strings" in po/README for +details. GIT_TEST_SPLIT_INDEX=<boolean> forces split-index mode on the whole test suite. Accept any boolean values that are accepted by git-config. +GIT_TEST_PROTOCOL_VERSION=<n>, when set, makes 'protocol.version' +default to n. + GIT_TEST_FULL_IN_PACK_ARRAY=<boolean> exercises the uncommon pack-objects code path where there are more than 1024 packs even if the actual number of packs in repository is below this limit. Accept @@ -342,11 +386,19 @@ GIT_TEST_INDEX_VERSION=<n> exercises the index read/write code path for the index version specified. Can be set to any valid version (currently 2, 3, or 4). +GIT_TEST_PACK_SPARSE=<boolean> if enabled will default the pack-objects +builtin to use the sparse object walk. This can still be overridden by +the --no-sparse command-line argument. + GIT_TEST_PRELOAD_INDEX=<boolean> exercises the preload-index code path by overriding the minimum number of cache entries required per thread. -GIT_TEST_REBASE_USE_BUILTIN=<boolean>, when false, disables the -builtin version of git-rebase. See 'rebase.useBuiltin' in +GIT_TEST_STASH_USE_BUILTIN=<boolean>, when false, disables the +built-in version of git-stash. See 'stash.useBuiltin' in +git-config(1). + +GIT_TEST_ADD_I_USE_BUILTIN=<boolean>, when true, enables the +built-in version of git add -i. See 'add.interactive.useBuiltin' in git-config(1). GIT_TEST_INDEX_THREADS=<n> enables exercising the multi-threaded loading @@ -358,6 +410,15 @@ GIT_TEST_MULTI_PACK_INDEX=<boolean>, when true, forces the multi-pack- index to be written after every 'git repack' command, and overrides the 'core.multiPackIndex' setting to true. +GIT_TEST_SIDEBAND_ALL=<boolean>, when true, overrides the +'uploadpack.allowSidebandAll' setting to true, and when false, forces +fetch-pack to not request sideband-all (even if the server advertises +sideband-all). + +GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=<boolean>, when true (which is +the default when running tests), errors out when an abbreviated option +is used. + Naming Tests ------------ @@ -425,7 +486,8 @@ This test harness library does the following things: - Creates an empty test directory with an empty .git/objects database and chdir(2) into it. This directory is 't/trash directory.$test_name_without_dotsh', with t/ subject to change by - the --root option documented above. + the --root option documented above, and a '.stress-<N>' suffix + appended by the --stress option. - Defines standard test helper functions for your scripts to use. These functions are designed to make all scripts behave @@ -822,6 +884,26 @@ library for your script to use. ... ' + - test_atexit <script> + + Prepend <script> to a list of commands to run unconditionally to + clean up before the test script exits, e.g. to stop a daemon: + + test_expect_success 'test git daemon' ' + git daemon & + daemon_pid=$! && + test_atexit 'kill $daemon_pid' && + hello world + ' + + The commands will be executed before the trash directory is removed, + i.e. the atexit commands will still be able to access any pidfiles or + socket files. + + Note that these commands will be run even when a test script run + with '--immediate' fails. Be careful with your atexit commands to + minimize any changes to the failed state. + - test_write_lines <lines> Write <lines> on standard output, one line per argument. @@ -892,6 +974,24 @@ library for your script to use. test_oid_init or test_oid_cache. Providing an unknown key is an error. + - yes [<string>] + + This is often seen in modern UNIX but some platforms lack it, so + the test harness overrides the platform implementation with a + more limited one. Use this only when feeding a handful lines of + output to the downstream---unlike the real version, it generates + only up to 99 lines. + + - test_bool_env <env-variable-name> <default-value> + + Given the name of an environment variable with a bool value, + normalize its value to a 0 (true) or 1 (false or empty string) + return code. Return with code corresponding to the given default + value if the variable is unset. + Abort the test script if either the value of the variable or the + default are not valid bool values. + + Prerequisites ------------- diff --git a/t/annotate-tests.sh b/t/annotate-tests.sh index 6da48a2..d933af5 100644 --- a/t/annotate-tests.sh +++ b/t/annotate-tests.sh @@ -68,6 +68,14 @@ test_expect_success 'blame 1 author' ' check_count A 2 ' +test_expect_success 'blame in a bare repo without starting commit' ' + git clone --bare . bare.git && + ( + cd bare.git && + check_count A 2 + ) +' + test_expect_success 'blame by tag objects' ' git tag -m "test tag" testTag && git tag -m "test tag #2" testTag2 testTag && diff --git a/t/check-non-portable-shell.pl b/t/check-non-portable-shell.pl index b45bdac..fd33035 100755 --- a/t/check-non-portable-shell.pl +++ b/t/check-non-portable-shell.pl @@ -27,15 +27,16 @@ for my $i (@ARGV) { close $f; } +my $line = ''; while (<>) { chomp; + $line .= $_; # stitch together incomplete lines (those ending with "\") - while (s/\\$//) { - $_ .= readline; - chomp; - } + next if $line =~ s/\\$//; - /\bsed\s+-i/ and err 'sed -i is not portable'; + $_ = $line; + /\bcp\s+-a/ and err 'cp -a is not portable'; + /\bsed\s+-[^efn]\s+/ and err 'sed option not portable (use only -n, -e, -f)'; /\becho\s+-[neE]/ and err 'echo with option is not portable (use printf)'; /^\s*declare\s+/ and err 'arrays/declare not portable'; /^\s*[^#]\s*which\s/ and err 'which is not portable (use type)'; @@ -45,8 +46,9 @@ while (<>) { /(?:\$\(seq|^\s*seq\b)/ and err 'seq is not portable (use test_seq)'; /\bgrep\b.*--file\b/ and err 'grep --file FILE is not portable (use grep -f FILE)'; /\bexport\s+[A-Za-z0-9_]*=/ and err '"export FOO=bar" is not portable (use FOO=bar && export FOO)'; - /^\s*([A-Z0-9_]+=(\w+|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and + /^\s*([A-Z0-9_]+=(\w*|(["']).*?\3)\s+)+(\w+)/ and exists($func{$4}) and err '"FOO=bar shell_func" assignment extends beyond "shell_func"'; + $line = ''; # this resets our $. for each file close ARGV if eof; } diff --git a/t/gitweb-lib.sh b/t/gitweb-lib.sh index 006d2a8..1f32ca6 100644 --- a/t/gitweb-lib.sh +++ b/t/gitweb-lib.sh @@ -58,10 +58,11 @@ gitweb_run () { GATEWAY_INTERFACE='CGI/1.1' HTTP_ACCEPT='*/*' REQUEST_METHOD='GET' - QUERY_STRING=""$1"" - PATH_INFO=""$2"" + QUERY_STRING=$1 + PATH_INFO=$2 + REQUEST_URI=/gitweb.cgi$PATH_INFO export GATEWAY_INTERFACE HTTP_ACCEPT REQUEST_METHOD \ - QUERY_STRING PATH_INFO + QUERY_STRING PATH_INFO REQUEST_URI GITWEB_CONFIG=$(pwd)/gitweb_config.perl export GITWEB_CONFIG diff --git a/t/helper/.gitignore b/t/helper/.gitignore index 2bad28a..48c7bb0 100644 --- a/t/helper/.gitignore +++ b/t/helper/.gitignore @@ -1,5 +1,4 @@ -* -!*.sh -!*.[ch] -!*.gitignore - +/test-tool +/test-fake-ssh +/test-line-buffer +/test-svn-fe diff --git a/t/helper/test-config.c b/t/helper/test-config.c index 214003d..234c722 100644 --- a/t/helper/test-config.c +++ b/t/helper/test-config.c @@ -37,21 +37,6 @@ * */ -static const char *scope_name(enum config_scope scope) -{ - switch (scope) { - case CONFIG_SCOPE_SYSTEM: - return "system"; - case CONFIG_SCOPE_GLOBAL: - return "global"; - case CONFIG_SCOPE_REPO: - return "repo"; - case CONFIG_SCOPE_CMDLINE: - return "cmdline"; - default: - return "unknown"; - } -} static int iterate_cb(const char *var, const char *value, void *data) { static int nr; @@ -63,7 +48,8 @@ static int iterate_cb(const char *var, const char *value, void *data) printf("value=%s\n", value ? value : "(null)"); printf("origin=%s\n", current_config_origin_type()); printf("name=%s\n", current_config_name()); - printf("scope=%s\n", scope_name(current_config_scope())); + printf("lno=%d\n", current_config_line()); + printf("scope=%s\n", config_scope_name(current_config_scope())); return 0; } diff --git a/t/helper/test-date.c b/t/helper/test-date.c index a083737..099eff4 100644 --- a/t/helper/test-date.c +++ b/t/helper/test-date.c @@ -3,25 +3,35 @@ static const char *usage_msg = "\n" " test-tool date relative [time_t]...\n" +" test-tool date human [time_t]...\n" " test-tool date show:<format> [time_t]...\n" " test-tool date parse [date]...\n" " test-tool date approxidate [date]...\n" " test-tool date timestamp [date]...\n" +" test-tool date getnanos [start-nanos]\n" " test-tool date is64bit\n" " test-tool date time_t-is64bit\n"; -static void show_relative_dates(const char **argv, struct timeval *now) +static void show_relative_dates(const char **argv) { struct strbuf buf = STRBUF_INIT; for (; *argv; argv++) { time_t t = atoi(*argv); - show_date_relative(t, 0, now, &buf); + show_date_relative(t, &buf); printf("%s -> %s\n", *argv, buf.buf); } strbuf_release(&buf); } +static void show_human_dates(const char **argv) +{ + for (; *argv; argv++) { + time_t t = atoi(*argv); + printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(HUMAN))); + } +} + static void show_dates(const char **argv, const char *format) { struct date_mode mode; @@ -45,7 +55,7 @@ static void show_dates(const char **argv, const char *format) } } -static void parse_dates(const char **argv, struct timeval *now) +static void parse_dates(const char **argv) { struct strbuf result = STRBUF_INIT; @@ -64,50 +74,54 @@ static void parse_dates(const char **argv, struct timeval *now) strbuf_release(&result); } -static void parse_approxidate(const char **argv, struct timeval *now) +static void parse_approxidate(const char **argv) { for (; *argv; argv++) { timestamp_t t; - t = approxidate_relative(*argv, now); + t = approxidate_relative(*argv); printf("%s -> %s\n", *argv, show_date(t, 0, DATE_MODE(ISO8601))); } } -static void parse_approx_timestamp(const char **argv, struct timeval *now) +static void parse_approx_timestamp(const char **argv) { for (; *argv; argv++) { timestamp_t t; - t = approxidate_relative(*argv, now); + t = approxidate_relative(*argv); printf("%s -> %"PRItime"\n", *argv, t); } } +static void getnanos(const char **argv) +{ + double seconds = getnanotime() / 1.0e9; + + if (*argv) + seconds -= strtod(*argv, NULL); + printf("%lf\n", seconds); +} + int cmd__date(int argc, const char **argv) { - struct timeval now; const char *x; - x = getenv("TEST_DATE_NOW"); - if (x) { - now.tv_sec = atoi(x); - now.tv_usec = 0; - } - else - gettimeofday(&now, NULL); - argv++; if (!*argv) usage(usage_msg); if (!strcmp(*argv, "relative")) - show_relative_dates(argv+1, &now); + show_relative_dates(argv+1); + else if (!strcmp(*argv, "human")) + show_human_dates(argv+1); else if (skip_prefix(*argv, "show:", &x)) show_dates(argv+1, x); else if (!strcmp(*argv, "parse")) - parse_dates(argv+1, &now); + parse_dates(argv+1); else if (!strcmp(*argv, "approxidate")) - parse_approxidate(argv+1, &now); + parse_approxidate(argv+1); else if (!strcmp(*argv, "timestamp")) - parse_approx_timestamp(argv+1, &now); + parse_approx_timestamp(argv+1); + else if (!strcmp(*argv, "getnanos")) + getnanos(argv+1); else if (!strcmp(*argv, "is64bit")) return sizeof(timestamp_t) == 8 ? 0 : 1; else if (!strcmp(*argv, "time_t-is64bit")) diff --git a/t/helper/test-dir-iterator.c b/t/helper/test-dir-iterator.c new file mode 100644 index 0000000..659b6bf --- /dev/null +++ b/t/helper/test-dir-iterator.c @@ -0,0 +1,65 @@ +#include "test-tool.h" +#include "git-compat-util.h" +#include "strbuf.h" +#include "iterator.h" +#include "dir-iterator.h" + +static const char *error_name(int error_number) +{ + switch (error_number) { + case ENOENT: return "ENOENT"; + case ENOTDIR: return "ENOTDIR"; + default: return "ESOMETHINGELSE"; + } +} + +/* + * usage: + * tool-test dir-iterator [--follow-symlinks] [--pedantic] directory_path + */ +int cmd__dir_iterator(int argc, const char **argv) +{ + struct dir_iterator *diter; + unsigned int flags = 0; + int iter_status; + + for (++argv, --argc; *argv && starts_with(*argv, "--"); ++argv, --argc) { + if (strcmp(*argv, "--follow-symlinks") == 0) + flags |= DIR_ITERATOR_FOLLOW_SYMLINKS; + else if (strcmp(*argv, "--pedantic") == 0) + flags |= DIR_ITERATOR_PEDANTIC; + else + die("invalid option '%s'", *argv); + } + + if (!*argv || argc != 1) + die("dir-iterator needs exactly one non-option argument"); + + diter = dir_iterator_begin(*argv, flags); + + if (!diter) { + printf("dir_iterator_begin failure: %s\n", error_name(errno)); + exit(EXIT_FAILURE); + } + + while ((iter_status = dir_iterator_advance(diter)) == ITER_OK) { + if (S_ISDIR(diter->st.st_mode)) + printf("[d] "); + else if (S_ISREG(diter->st.st_mode)) + printf("[f] "); + else if (S_ISLNK(diter->st.st_mode)) + printf("[s] "); + else + printf("[?] "); + + printf("(%s) [%s] %s\n", diter->relative_path, diter->basename, + diter->path.buf); + } + + if (iter_status != ITER_DONE) { + printf("dir_iterator_advance failure\n"); + return 1; + } + + return 0; +} diff --git a/t/helper/test-dump-fsmonitor.c b/t/helper/test-dump-fsmonitor.c index 08e3684..975f0ac 100644 --- a/t/helper/test-dump-fsmonitor.c +++ b/t/helper/test-dump-fsmonitor.c @@ -3,17 +3,17 @@ int cmd__dump_fsmonitor(int ac, const char **av) { - struct index_state *istate = &the_index; + struct index_state *istate = the_repository->index; int i; setup_git_directory(); - if (do_read_index(istate, get_index_file(), 0) < 0) + if (do_read_index(istate, the_repository->index_file, 0) < 0) die("unable to read index file"); if (!istate->fsmonitor_last_update) { printf("no fsmonitor\n"); return 0; } - printf("fsmonitor last update %"PRIuMAX"\n", (uintmax_t)istate->fsmonitor_last_update); + printf("fsmonitor last update %s\n", istate->fsmonitor_last_update); for (i = 0; i < istate->cache_nr; i++) printf((istate->cache[i]->ce_flags & CE_FSMONITOR_VALID) ? "+" : "-"); diff --git a/t/helper/test-dump-untracked-cache.c b/t/helper/test-dump-untracked-cache.c index 52870eb..cf0f2c7 100644 --- a/t/helper/test-dump-untracked-cache.c +++ b/t/helper/test-dump-untracked-cache.c @@ -1,3 +1,4 @@ +#define USE_THE_INDEX_COMPATIBILITY_MACROS #include "test-tool.h" #include "cache.h" #include "dir.h" diff --git a/t/helper/test-example-decorate.c b/t/helper/test-example-decorate.c index a20a616..c8a1cde 100644 --- a/t/helper/test-example-decorate.c +++ b/t/helper/test-example-decorate.c @@ -26,8 +26,8 @@ int cmd__example_decorate(int argc, const char **argv) * Add 2 objects, one with a non-NULL decoration and one with a NULL * decoration. */ - one = lookup_unknown_object(one_oid.hash); - two = lookup_unknown_object(two_oid.hash); + one = lookup_unknown_object(&one_oid); + two = lookup_unknown_object(&two_oid); ret = add_decoration(&n, one, &decoration_a); if (ret) BUG("when adding a brand-new object, NULL should be returned"); @@ -56,7 +56,7 @@ int cmd__example_decorate(int argc, const char **argv) ret = lookup_decoration(&n, two); if (ret != &decoration_b) BUG("lookup should return added declaration"); - three = lookup_unknown_object(three_oid.hash); + three = lookup_unknown_object(&three_oid); ret = lookup_decoration(&n, three); if (ret) BUG("lookup for unknown object should return NULL"); diff --git a/t/helper/test-genzeros.c b/t/helper/test-genzeros.c new file mode 100644 index 0000000..9532f5b --- /dev/null +++ b/t/helper/test-genzeros.c @@ -0,0 +1,21 @@ +#include "test-tool.h" +#include "git-compat-util.h" + +int cmd__genzeros(int argc, const char **argv) +{ + long count; + + if (argc > 2) { + fprintf(stderr, "usage: %s [<count>]\n", argv[0]); + return 1; + } + + count = argc > 1 ? strtol(argv[1], NULL, 0) : -1L; + + while (count < 0 || count--) { + if (putchar(0) == EOF) + return -1; + } + + return 0; +} diff --git a/t/helper/test-hash-speed.c b/t/helper/test-hash-speed.c new file mode 100644 index 0000000..432233c --- /dev/null +++ b/t/helper/test-hash-speed.c @@ -0,0 +1,61 @@ +#include "test-tool.h" +#include "cache.h" + +#define NUM_SECONDS 3 + +static inline void compute_hash(const struct git_hash_algo *algo, git_hash_ctx *ctx, uint8_t *final, const void *p, size_t len) +{ + algo->init_fn(ctx); + algo->update_fn(ctx, p, len); + algo->final_fn(final, ctx); +} + +int cmd__hash_speed(int ac, const char **av) +{ + git_hash_ctx ctx; + unsigned char hash[GIT_MAX_RAWSZ]; + clock_t initial, start, end; + unsigned bufsizes[] = { 64, 256, 1024, 8192, 16384 }; + int i; + void *p; + const struct git_hash_algo *algo = NULL; + + if (ac == 2) { + for (i = 1; i < GIT_HASH_NALGOS; i++) { + if (!strcmp(av[1], hash_algos[i].name)) { + algo = &hash_algos[i]; + break; + } + } + } + if (!algo) + die("usage: test-tool hash-speed algo_name"); + + /* Use this as an offset to make overflow less likely. */ + initial = clock(); + + printf("algo: %s\n", algo->name); + + for (i = 0; i < ARRAY_SIZE(bufsizes); i++) { + unsigned long j, kb; + double kb_per_sec; + p = xcalloc(1, bufsizes[i]); + start = end = clock() - initial; + for (j = 0; ((end - start) / CLOCKS_PER_SEC) < NUM_SECONDS; j++) { + compute_hash(algo, &ctx, hash, p, bufsizes[i]); + + /* + * Only check elapsed time every 128 iterations to avoid + * dominating the runtime with system calls. + */ + if (!(j & 127)) + end = clock() - initial; + } + kb = j * bufsizes[i]; + kb_per_sec = kb / (1024 * ((double)end - start) / CLOCKS_PER_SEC); + printf("size %u: %lu iters; %lu KiB; %0.2f KiB/s\n", bufsizes[i], j, kb, kb_per_sec); + free(p); + } + + exit(0); +} diff --git a/t/helper/test-hash.c b/t/helper/test-hash.c new file mode 100644 index 0000000..0a31de6 --- /dev/null +++ b/t/helper/test-hash.c @@ -0,0 +1,58 @@ +#include "test-tool.h" +#include "cache.h" + +int cmd_hash_impl(int ac, const char **av, int algo) +{ + git_hash_ctx ctx; + unsigned char hash[GIT_MAX_HEXSZ]; + unsigned bufsz = 8192; + int binary = 0; + char *buffer; + const struct git_hash_algo *algop = &hash_algos[algo]; + + if (ac == 2) { + if (!strcmp(av[1], "-b")) + binary = 1; + else + bufsz = strtoul(av[1], NULL, 10) * 1024 * 1024; + } + + if (!bufsz) + bufsz = 8192; + + while ((buffer = malloc(bufsz)) == NULL) { + fprintf(stderr, "bufsz %u is too big, halving...\n", bufsz); + bufsz /= 2; + if (bufsz < 1024) + die("OOPS"); + } + + algop->init_fn(&ctx); + + while (1) { + ssize_t sz, this_sz; + char *cp = buffer; + unsigned room = bufsz; + this_sz = 0; + while (room) { + sz = xread(0, cp, room); + if (sz == 0) + break; + if (sz < 0) + die_errno("test-hash"); + this_sz += sz; + cp += sz; + room -= sz; + } + if (this_sz == 0) + break; + algop->update_fn(&ctx, buffer, this_sz); + } + algop->final_fn(hash, &ctx); + + if (binary) + fwrite(hash, 1, algop->rawsz, stdout); + else + puts(hash_to_hex_algop(hash, algop)); + exit(0); +} diff --git a/t/helper/test-hashmap.c b/t/helper/test-hashmap.c index 23d2b17..f387062 100644 --- a/t/helper/test-hashmap.c +++ b/t/helper/test-hashmap.c @@ -5,6 +5,7 @@ struct test_entry { + int padding; /* hashmap entry no longer needs to be the first member */ struct hashmap_entry ent; /* key and value as two \0-terminated strings */ char key[FLEX_ARRAY]; @@ -16,15 +17,17 @@ static const char *get_value(const struct test_entry *e) } static int test_entry_cmp(const void *cmp_data, - const void *entry, - const void *entry_or_key, + const struct hashmap_entry *eptr, + const struct hashmap_entry *entry_or_key, const void *keydata) { const int ignore_case = cmp_data ? *((int *)cmp_data) : 0; - const struct test_entry *e1 = entry; - const struct test_entry *e2 = entry_or_key; + const struct test_entry *e1, *e2; const char *key = keydata; + e1 = container_of(eptr, const struct test_entry, ent); + e2 = container_of(entry_or_key, const struct test_entry, ent); + if (ignore_case) return strcasecmp(e1->key, key ? key : e2->key); else @@ -37,7 +40,7 @@ static struct test_entry *alloc_test_entry(unsigned int hash, size_t klen = strlen(key); size_t vlen = strlen(value); struct test_entry *entry = xmalloc(st_add4(sizeof(*entry), klen, vlen, 2)); - hashmap_entry_init(entry, hash); + hashmap_entry_init(&entry->ent, hash); memcpy(entry->key, key, klen + 1); memcpy(entry->key + klen + 1, value, vlen + 1); return entry; @@ -103,11 +106,11 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) /* add entries */ for (i = 0; i < TEST_SIZE; i++) { - hashmap_entry_init(entries[i], hashes[i]); - hashmap_add(&map, entries[i]); + hashmap_entry_init(&entries[i]->ent, hashes[i]); + hashmap_add(&map, &entries[i]->ent); } - hashmap_free(&map, 0); + hashmap_free(&map); } } else { /* test map lookups */ @@ -116,8 +119,8 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) /* fill the map (sparsely if specified) */ j = (method & TEST_SPARSE) ? TEST_SIZE / 10 : TEST_SIZE; for (i = 0; i < j; i++) { - hashmap_entry_init(entries[i], hashes[i]); - hashmap_add(&map, entries[i]); + hashmap_entry_init(&entries[i]->ent, hashes[i]); + hashmap_add(&map, &entries[i]->ent); } for (j = 0; j < rounds; j++) { @@ -127,7 +130,7 @@ static void perf_hashmap(unsigned int method, unsigned int rounds) } } - hashmap_free(&map, 0); + hashmap_free(&map); } } @@ -173,20 +176,13 @@ int cmd__hashmap(int argc, const char **argv) p2 = strtok(NULL, DELIM); } - if (!strcmp("hash", cmd) && p1) { - - /* print results of different hash functions */ - printf("%u %u %u %u\n", - strhash(p1), memhash(p1, strlen(p1)), - strihash(p1), memihash(p1, strlen(p1))); - - } else if (!strcmp("add", cmd) && p1 && p2) { + if (!strcmp("add", cmd) && p1 && p2) { /* create entry with key = p1, value = p2 */ entry = alloc_test_entry(hash, p1, p2); /* add to hashmap */ - hashmap_add(&map, entry); + hashmap_add(&map, &entry->ent); } else if (!strcmp("put", cmd) && p1 && p2) { @@ -194,43 +190,44 @@ int cmd__hashmap(int argc, const char **argv) entry = alloc_test_entry(hash, p1, p2); /* add / replace entry */ - entry = hashmap_put(&map, entry); + entry = hashmap_put_entry(&map, entry, ent); /* print and free replaced entry, if any */ puts(entry ? get_value(entry) : "NULL"); free(entry); } else if (!strcmp("get", cmd) && p1) { - /* lookup entry in hashmap */ - entry = hashmap_get_from_hash(&map, hash, p1); + entry = hashmap_get_entry_from_hash(&map, hash, p1, + struct test_entry, ent); /* print result */ if (!entry) puts("NULL"); - while (entry) { + hashmap_for_each_entry_from(&map, entry, ent) puts(get_value(entry)); - entry = hashmap_get_next(&map, entry); - } } else if (!strcmp("remove", cmd) && p1) { /* setup static key */ struct hashmap_entry key; + struct hashmap_entry *rm; hashmap_entry_init(&key, hash); /* remove entry from hashmap */ - entry = hashmap_remove(&map, &key, p1); + rm = hashmap_remove(&map, &key, p1); + entry = rm ? container_of(rm, struct test_entry, ent) + : NULL; /* print result and free entry*/ puts(entry ? get_value(entry) : "NULL"); free(entry); } else if (!strcmp("iterate", cmd)) { - struct hashmap_iter iter; - hashmap_iter_init(&map, &iter); - while ((entry = hashmap_iter_next(&iter))) + + hashmap_for_each_entry(&map, &iter, entry, + ent /* member name */) printf("%s %s\n", entry->key, get_value(entry)); } else if (!strcmp("size", cmd)) { @@ -265,6 +262,6 @@ int cmd__hashmap(int argc, const char **argv) } strbuf_release(&line); - hashmap_free(&map, 1); + hashmap_free_entries(&map, struct test_entry, ent); return 0; } diff --git a/t/helper/test-lazy-init-name-hash.c b/t/helper/test-lazy-init-name-hash.c index b99a370..cd1b4c9 100644 --- a/t/helper/test-lazy-init-name-hash.c +++ b/t/helper/test-lazy-init-name-hash.c @@ -41,17 +41,13 @@ static void dump_run(void) die("non-threaded code path used"); } - dir = hashmap_iter_first(&the_index.dir_hash, &iter_dir); - while (dir) { + hashmap_for_each_entry(&the_index.dir_hash, &iter_dir, dir, + ent /* member name */) printf("dir %08x %7d %s\n", dir->ent.hash, dir->nr, dir->name); - dir = hashmap_iter_next(&iter_dir); - } - ce = hashmap_iter_first(&the_index.name_hash, &iter_cache); - while (ce) { + hashmap_for_each_entry(&the_index.name_hash, &iter_cache, ce, + ent /* member name */) printf("name %08x %s\n", ce->ent.hash, ce->name); - ce = hashmap_iter_next(&iter_cache); - } discard_cache(); } diff --git a/t/helper/test-match-trees.c b/t/helper/test-match-trees.c index 96857f2..b9fd427 100644 --- a/t/helper/test-match-trees.c +++ b/t/helper/test-match-trees.c @@ -20,7 +20,7 @@ int cmd__match_trees(int ac, const char **av) if (!two) die("not a tree-ish %s", av[2]); - shift_tree(&one->object.oid, &two->object.oid, &shifted, -1); + shift_tree(the_repository, &one->object.oid, &two->object.oid, &shifted, -1); printf("shifted: %s\n", oid_to_hex(&shifted)); exit(0); diff --git a/t/helper/test-oidmap.c b/t/helper/test-oidmap.c new file mode 100644 index 0000000..0acf999 --- /dev/null +++ b/t/helper/test-oidmap.c @@ -0,0 +1,112 @@ +#include "test-tool.h" +#include "cache.h" +#include "oidmap.h" +#include "strbuf.h" + +/* key is an oid and value is a name (could be a refname for example) */ +struct test_entry { + struct oidmap_entry entry; + char name[FLEX_ARRAY]; +}; + +#define DELIM " \t\r\n" + +/* + * Read stdin line by line and print result of commands to stdout: + * + * hash oidkey -> sha1hash(oidkey) + * put oidkey namevalue -> NULL / old namevalue + * get oidkey -> NULL / namevalue + * remove oidkey -> NULL / old namevalue + * iterate -> oidkey1 namevalue1\noidkey2 namevalue2\n... + * + */ +int cmd__oidmap(int argc, const char **argv) +{ + struct strbuf line = STRBUF_INIT; + struct oidmap map = OIDMAP_INIT; + + setup_git_directory(); + + /* init oidmap */ + oidmap_init(&map, 0); + + /* process commands from stdin */ + while (strbuf_getline(&line, stdin) != EOF) { + char *cmd, *p1 = NULL, *p2 = NULL; + struct test_entry *entry; + struct object_id oid; + + /* break line into command and up to two parameters */ + cmd = strtok(line.buf, DELIM); + /* ignore empty lines */ + if (!cmd || *cmd == '#') + continue; + + p1 = strtok(NULL, DELIM); + if (p1) + p2 = strtok(NULL, DELIM); + + if (!strcmp("put", cmd) && p1 && p2) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* create entry with oid_key = p1, name_value = p2 */ + FLEX_ALLOC_STR(entry, name, p2); + oidcpy(&entry->entry.oid, &oid); + + /* add / replace entry */ + entry = oidmap_put(&map, entry); + + /* print and free replaced entry, if any */ + puts(entry ? entry->name : "NULL"); + free(entry); + + } else if (!strcmp("get", cmd) && p1) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* lookup entry in oidmap */ + entry = oidmap_get(&map, &oid); + + /* print result */ + puts(entry ? entry->name : "NULL"); + + } else if (!strcmp("remove", cmd) && p1) { + + if (get_oid(p1, &oid)) { + printf("Unknown oid: %s\n", p1); + continue; + } + + /* remove entry from oidmap */ + entry = oidmap_remove(&map, &oid); + + /* print result and free entry*/ + puts(entry ? entry->name : "NULL"); + free(entry); + + } else if (!strcmp("iterate", cmd)) { + + struct oidmap_iter iter; + oidmap_iter_init(&map, &iter); + while ((entry = oidmap_iter_next(&iter))) + printf("%s %s\n", oid_to_hex(&entry->entry.oid), entry->name); + + } else { + + printf("Unknown command %s\n", cmd); + + } + } + + strbuf_release(&line); + oidmap_free(&map, 1); + return 0; +} diff --git a/t/helper/test-parse-options.c b/t/helper/test-parse-options.c index 47fee66..2051ce5 100644 --- a/t/helper/test-parse-options.c +++ b/t/helper/test-parse-options.c @@ -2,6 +2,7 @@ #include "cache.h" #include "parse-options.h" #include "string-list.h" +#include "trace2.h" static int boolean = 0; static int integer = 0; @@ -120,6 +121,8 @@ int cmd__parse_options(int argc, const char **argv) OPT_INTEGER('j', NULL, &integer, "get a integer, too"), OPT_MAGNITUDE('m', "magnitude", &magnitude, "get a magnitude"), OPT_SET_INT(0, "set23", &integer, "set integer to 23", 23), + OPT_CMDMODE(0, "mode1", &integer, "set integer to 1 (cmdmode option)", 1), + OPT_CMDMODE(0, "mode2", &integer, "set integer to 2 (cmdmode option)", 2), OPT_CALLBACK('L', "length", &integer, "str", "get length of <str>", length_callback), OPT_FILENAME('F', "file", &file, "set file to <file>"), @@ -131,7 +134,7 @@ int cmd__parse_options(int argc, const char **argv) OPT_NOOP_NOARG(0, "obsolete"), OPT_STRING_LIST(0, "list", &list, "str", "add str to list"), OPT_GROUP("Magic arguments"), - OPT_ARGUMENT("quux", "means --quux"), + OPT_ARGUMENT("quux", NULL, "means --quux"), OPT_NUMBER_CALLBACK(&integer, "set integer to NUM", number_callback), { OPTION_COUNTUP, '+', NULL, &boolean, NULL, "same as -b", @@ -148,11 +151,16 @@ int cmd__parse_options(int argc, const char **argv) OPT_CALLBACK(0, "expect", &expect, "string", "expected output in the variable dump", collect_expect), + OPT_GROUP("Alias"), + OPT_STRING('A', "alias-source", &string, "string", "get a string"), + OPT_ALIAS('Z', "alias-target", "alias-source"), OPT_END(), }; int i; int ret = 0; + trace2_cmd_name("_parse_"); + argc = parse_options(argc, (const char **)argv, prefix, options, usage, 0); if (length_cb.called) { diff --git a/t/helper/test-parse-pathspec-file.c b/t/helper/test-parse-pathspec-file.c new file mode 100644 index 0000000..02f4ccf --- /dev/null +++ b/t/helper/test-parse-pathspec-file.c @@ -0,0 +1,33 @@ +#include "test-tool.h" +#include "parse-options.h" +#include "pathspec.h" +#include "gettext.h" + +int cmd__parse_pathspec_file(int argc, const char **argv) +{ + struct pathspec pathspec; + const char *pathspec_from_file = 0; + int pathspec_file_nul = 0, i; + + static const char *const usage[] = { + "test-tool parse-pathspec-file --pathspec-from-file [--pathspec-file-nul]", + NULL + }; + + struct option options[] = { + OPT_PATHSPEC_FROM_FILE(&pathspec_from_file), + OPT_PATHSPEC_FILE_NUL(&pathspec_file_nul), + OPT_END() + }; + + parse_options(argc, argv, 0, options, usage, 0); + + parse_pathspec_file(&pathspec, 0, 0, 0, pathspec_from_file, + pathspec_file_nul); + + for (i = 0; i < pathspec.nr; i++) + printf("%s\n", pathspec.items[i].original); + + clear_pathspec(&pathspec); + return 0; +} diff --git a/t/helper/test-path-utils.c b/t/helper/test-path-utils.c index e737a94..409034c 100644 --- a/t/helper/test-path-utils.c +++ b/t/helper/test-path-utils.c @@ -177,6 +177,14 @@ static int is_dotgitmodules(const char *path) return is_hfs_dotgitmodules(path) || is_ntfs_dotgitmodules(path); } +static int cmp_by_st_size(const void *a, const void *b) +{ + intptr_t x = (intptr_t)((struct string_list_item *)a)->util; + intptr_t y = (intptr_t)((struct string_list_item *)b)->util; + + return x > y ? -1 : (x < y ? +1 : 0); +} + /* * A very simple, reproducible pseudo-random generator. Copied from * `test-genrandom.c`. @@ -384,6 +392,62 @@ int cmd__path_utils(int argc, const char **argv) return !!res; } + if (argc > 2 && !strcmp(argv[1], "file-size")) { + int res = 0, i; + struct stat st; + + for (i = 2; i < argc; i++) + if (stat(argv[i], &st)) + res = error_errno("Cannot stat '%s'", argv[i]); + else + printf("%"PRIuMAX"\n", (uintmax_t)st.st_size); + return !!res; + } + + if (argc == 4 && !strcmp(argv[1], "skip-n-bytes")) { + int fd = open(argv[2], O_RDONLY), offset = atoi(argv[3]); + char buffer[65536]; + + if (fd < 0) + die_errno("could not open '%s'", argv[2]); + if (lseek(fd, offset, SEEK_SET) < 0) + die_errno("could not skip %d bytes", offset); + for (;;) { + ssize_t count = read(fd, buffer, sizeof(buffer)); + if (count < 0) + die_errno("could not read '%s'", argv[2]); + if (!count) + break; + if (write(1, buffer, count) < 0) + die_errno("could not write to stdout"); + } + close(fd); + return 0; + } + + if (argc > 5 && !strcmp(argv[1], "slice-tests")) { + int res = 0; + long offset, stride, i; + struct string_list list = STRING_LIST_INIT_NODUP; + struct stat st; + + offset = strtol(argv[2], NULL, 10); + stride = strtol(argv[3], NULL, 10); + if (stride < 1) + stride = 1; + for (i = 4; i < argc; i++) + if (stat(argv[i], &st)) + res = error_errno("Cannot stat '%s'", argv[i]); + else + string_list_append(&list, argv[i])->util = + (void *)(intptr_t)st.st_size; + QSORT(list.items, list.nr, cmp_by_st_size); + for (i = offset; i < list.nr; i+= stride) + printf("%s\n", list.items[i].string); + + return !!res; + } + if (argc > 1 && !strcmp(argv[1], "protect_ntfs_hfs")) return !!protect_ntfs_hfs_benchmark(argc - 1, argv + 1); diff --git a/t/helper/test-prio-queue.c b/t/helper/test-prio-queue.c index 5bc9c46..f402844 100644 --- a/t/helper/test-prio-queue.c +++ b/t/helper/test-prio-queue.c @@ -40,7 +40,7 @@ int cmd__prio_queue(int argc, const char **argv) } else if (!strcmp(*argv, "stack")) { pq.compare = NULL; } else { - int *v = malloc(sizeof(*v)); + int *v = xmalloc(sizeof(*v)); *v = atoi(*argv); prio_queue_put(&pq, v); } diff --git a/t/helper/test-progress.c b/t/helper/test-progress.c new file mode 100644 index 0000000..42b96cb --- /dev/null +++ b/t/helper/test-progress.c @@ -0,0 +1,81 @@ +/* + * A test helper to exercise the progress display. + * + * Reads instructions from standard input, one instruction per line: + * + * "progress <items>" - Call display_progress() with the given item count + * as parameter. + * "throughput <bytes> <millis> - Call display_throughput() with the given + * byte count as parameter. The 'millis' + * specify the time elapsed since the + * start_progress() call. + * "update" - Set the 'progress_update' flag. + * + * See 't0500-progress-display.sh' for examples. + */ +#include "test-tool.h" +#include "gettext.h" +#include "parse-options.h" +#include "progress.h" +#include "strbuf.h" + +/* + * These are defined in 'progress.c', but are not exposed in 'progress.h', + * because they are exclusively for testing. + */ +extern int progress_testing; +extern uint64_t progress_test_ns; +void progress_test_force_update(void); + +int cmd__progress(int argc, const char **argv) +{ + int total = 0; + const char *title; + struct strbuf line = STRBUF_INIT; + struct progress *progress; + + const char *usage[] = { + "test-tool progress [--total=<n>] <progress-title>", + NULL + }; + struct option options[] = { + OPT_INTEGER(0, "total", &total, "total number of items"), + OPT_END(), + }; + + argc = parse_options(argc, argv, NULL, options, usage, 0); + if (argc != 1) + die("need a title for the progress output"); + title = argv[0]; + + progress_testing = 1; + progress = start_progress(title, total); + while (strbuf_getline(&line, stdin) != EOF) { + char *end; + + if (skip_prefix(line.buf, "progress ", (const char **) &end)) { + uint64_t item_count = strtoull(end, &end, 10); + if (*end != '\0') + die("invalid input: '%s'\n", line.buf); + display_progress(progress, item_count); + } else if (skip_prefix(line.buf, "throughput ", + (const char **) &end)) { + uint64_t byte_count, test_ms; + + byte_count = strtoull(end, &end, 10); + if (*end != ' ') + die("invalid input: '%s'\n", line.buf); + test_ms = strtoull(end + 1, &end, 10); + if (*end != '\0') + die("invalid input: '%s'\n", line.buf); + progress_test_ns = test_ms * 1000 * 1000; + display_throughput(progress, byte_count); + } else if (!strcmp(line.buf, "update")) + progress_test_force_update(); + else + die("invalid input: '%s'\n", line.buf); + } + stop_progress(&progress); + + return 0; +} diff --git a/t/helper/test-read-cache.c b/t/helper/test-read-cache.c index d674c88..244977a 100644 --- a/t/helper/test-read-cache.c +++ b/t/helper/test-read-cache.c @@ -1,14 +1,35 @@ #include "test-tool.h" #include "cache.h" +#include "config.h" int cmd__read_cache(int argc, const char **argv) { int i, cnt = 1; + const char *name = NULL; + + if (argc > 1 && skip_prefix(argv[1], "--print-and-refresh=", &name)) { + argc--; + argv++; + } + if (argc == 2) cnt = strtol(argv[1], NULL, 0); setup_git_directory(); + git_config(git_default_config, NULL); for (i = 0; i < cnt; i++) { read_cache(); + if (name) { + int pos; + + refresh_index(&the_index, REFRESH_QUIET, + NULL, NULL, NULL); + pos = index_name_pos(&the_index, name, strlen(name)); + if (pos < 0) + die("%s not in index", name); + printf("%s is%s up to date\n", name, + ce_uptodate(the_index.cache[pos]) ? "" : " not"); + write_file(name, "%d\n", i); + } discard_cache(); } return 0; diff --git a/t/helper/test-read-graph.c b/t/helper/test-read-graph.c new file mode 100644 index 0000000..f8a4617 --- /dev/null +++ b/t/helper/test-read-graph.c @@ -0,0 +1,53 @@ +#include "test-tool.h" +#include "cache.h" +#include "commit-graph.h" +#include "repository.h" +#include "object-store.h" + +int cmd__read_graph(int argc, const char **argv) +{ + struct commit_graph *graph = NULL; + char *graph_name; + int open_ok; + int fd; + struct stat st; + struct object_directory *odb; + + setup_git_directory(); + odb = the_repository->objects->odb; + + graph_name = get_commit_graph_filename(odb); + + open_ok = open_commit_graph(graph_name, &fd, &st); + if (!open_ok) + die_errno(_("Could not open commit-graph '%s'"), graph_name); + + graph = load_commit_graph_one_fd_st(fd, &st, odb); + if (!graph) + return 1; + + FREE_AND_NULL(graph_name); + + printf("header: %08x %d %d %d %d\n", + ntohl(*(uint32_t*)graph->data), + *(unsigned char*)(graph->data + 4), + *(unsigned char*)(graph->data + 5), + *(unsigned char*)(graph->data + 6), + *(unsigned char*)(graph->data + 7)); + printf("num_commits: %u\n", graph->num_commits); + printf("chunks:"); + + if (graph->chunk_oid_fanout) + printf(" oid_fanout"); + if (graph->chunk_oid_lookup) + printf(" oid_lookup"); + if (graph->chunk_commit_data) + printf(" commit_metadata"); + if (graph->chunk_extra_edges) + printf(" extra_edges"); + printf("\n"); + + UNLEAK(graph); + + return 0; +} diff --git a/t/helper/test-ref-store.c b/t/helper/test-ref-store.c index e9e0541..799fc00 100644 --- a/t/helper/test-ref-store.c +++ b/t/helper/test-ref-store.c @@ -233,7 +233,7 @@ static int cmd_update_ref(struct ref_store *refs, const char **argv) { const char *msg = notnull(*argv++, "msg"); const char *refname = notnull(*argv++, "refname"); - const char *new_sha1_buf = notnull(*argv++, "old-sha1"); + const char *new_sha1_buf = notnull(*argv++, "new-sha1"); const char *old_sha1_buf = notnull(*argv++, "old-sha1"); unsigned int flags = arg_flags(*argv++, "flags"); struct object_id old_oid; diff --git a/t/helper/test-repository.c b/t/helper/test-repository.c index 6a84a53..f7f8618 100644 --- a/t/helper/test-repository.c +++ b/t/helper/test-repository.c @@ -17,6 +17,11 @@ static void test_parse_commit_in_graph(const char *gitdir, const char *worktree, setup_git_env(gitdir); + memset(the_repository, 0, sizeof(*the_repository)); + + /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ + repo_set_hash_algo(the_repository, GIT_HASH_SHA1); + if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); @@ -43,6 +48,11 @@ static void test_get_commit_tree_in_graph(const char *gitdir, setup_git_env(gitdir); + memset(the_repository, 0, sizeof(*the_repository)); + + /* TODO: Needed for temporary hack in hashcmp, see 183a638b7da. */ + repo_set_hash_algo(the_repository, GIT_HASH_SHA1); + if (repo_init(&r, gitdir, worktree)) die("Couldn't init repo"); diff --git a/t/helper/test-run-command.c b/t/helper/test-run-command.c index 8579b1f..1646aa2 100644 --- a/t/helper/test-run-command.c +++ b/t/helper/test-run-command.c @@ -10,9 +10,14 @@ #include "test-tool.h" #include "git-compat-util.h" +#include "cache.h" #include "run-command.h" #include "argv-array.h" #include "strbuf.h" +#include "parse-options.h" +#include "string-list.h" +#include "thread-utils.h" +#include "wildmatch.h" #include "gettext.h" #include "parse-options.h" @@ -50,6 +55,151 @@ static int task_finished(int result, return 1; } +struct testsuite { + struct string_list tests, failed; + int next; + int quiet, immediate, verbose, verbose_log, trace, write_junit_xml; +}; +#define TESTSUITE_INIT \ + { STRING_LIST_INIT_DUP, STRING_LIST_INIT_DUP, -1, 0, 0, 0, 0, 0, 0 } + +static int next_test(struct child_process *cp, struct strbuf *err, void *cb, + void **task_cb) +{ + struct testsuite *suite = cb; + const char *test; + if (suite->next >= suite->tests.nr) + return 0; + + test = suite->tests.items[suite->next++].string; + argv_array_pushl(&cp->args, "sh", test, NULL); + if (suite->quiet) + argv_array_push(&cp->args, "--quiet"); + if (suite->immediate) + argv_array_push(&cp->args, "-i"); + if (suite->verbose) + argv_array_push(&cp->args, "-v"); + if (suite->verbose_log) + argv_array_push(&cp->args, "-V"); + if (suite->trace) + argv_array_push(&cp->args, "-x"); + if (suite->write_junit_xml) + argv_array_push(&cp->args, "--write-junit-xml"); + + strbuf_addf(err, "Output of '%s':\n", test); + *task_cb = (void *)test; + + return 1; +} + +static int test_finished(int result, struct strbuf *err, void *cb, + void *task_cb) +{ + struct testsuite *suite = cb; + const char *name = (const char *)task_cb; + + if (result) + string_list_append(&suite->failed, name); + + strbuf_addf(err, "%s: '%s'\n", result ? "FAIL" : "SUCCESS", name); + + return 0; +} + +static int test_failed(struct strbuf *out, void *cb, void *task_cb) +{ + struct testsuite *suite = cb; + const char *name = (const char *)task_cb; + + string_list_append(&suite->failed, name); + strbuf_addf(out, "FAILED TO START: '%s'\n", name); + + return 0; +} + +static const char * const testsuite_usage[] = { + "test-run-command testsuite [<options>] [<pattern>...]", + NULL +}; + +static int testsuite(int argc, const char **argv) +{ + struct testsuite suite = TESTSUITE_INIT; + int max_jobs = 1, i, ret; + DIR *dir; + struct dirent *d; + struct option options[] = { + OPT_BOOL('i', "immediate", &suite.immediate, + "stop at first failed test case(s)"), + OPT_INTEGER('j', "jobs", &max_jobs, "run <N> jobs in parallel"), + OPT_BOOL('q', "quiet", &suite.quiet, "be terse"), + OPT_BOOL('v', "verbose", &suite.verbose, "be verbose"), + OPT_BOOL('V', "verbose-log", &suite.verbose_log, + "be verbose, redirected to a file"), + OPT_BOOL('x', "trace", &suite.trace, "trace shell commands"), + OPT_BOOL(0, "write-junit-xml", &suite.write_junit_xml, + "write JUnit-style XML files"), + OPT_END() + }; + + memset(&suite, 0, sizeof(suite)); + suite.tests.strdup_strings = suite.failed.strdup_strings = 1; + + argc = parse_options(argc, argv, NULL, options, + testsuite_usage, PARSE_OPT_STOP_AT_NON_OPTION); + + if (max_jobs <= 0) + max_jobs = online_cpus(); + + dir = opendir("."); + if (!dir) + die("Could not open the current directory"); + while ((d = readdir(dir))) { + const char *p = d->d_name; + + if (*p != 't' || !isdigit(p[1]) || !isdigit(p[2]) || + !isdigit(p[3]) || !isdigit(p[4]) || p[5] != '-' || + !ends_with(p, ".sh")) + continue; + + /* No pattern: match all */ + if (!argc) { + string_list_append(&suite.tests, p); + continue; + } + + for (i = 0; i < argc; i++) + if (!wildmatch(argv[i], p, 0)) { + string_list_append(&suite.tests, p); + break; + } + } + closedir(dir); + + if (!suite.tests.nr) + die("No tests match!"); + if (max_jobs > suite.tests.nr) + max_jobs = suite.tests.nr; + + fprintf(stderr, "Running %d tests (%d at a time)\n", + suite.tests.nr, max_jobs); + + ret = run_processes_parallel(max_jobs, next_test, test_failed, + test_finished, &suite); + + if (suite.failed.nr > 0) { + ret = 1; + fprintf(stderr, "%d tests failed:\n\n", suite.failed.nr); + for (i = 0; i < suite.failed.nr; i++) + fprintf(stderr, "\t%s\n", suite.failed.items[i].string); + } + + string_list_clear(&suite.tests, 0); + string_list_clear(&suite.failed, 0); + + return !!ret; +} + static uint64_t my_random_next = 1234; static uint64_t my_random(void) @@ -178,11 +328,58 @@ static int quote_echo(int argc, const char **argv) return 0; } +static int inherit_handle(const char *argv0) +{ + struct child_process cp = CHILD_PROCESS_INIT; + char path[PATH_MAX]; + int tmp; + + /* First, open an inheritable handle */ + xsnprintf(path, sizeof(path), "out-XXXXXX"); + tmp = xmkstemp(path); + + argv_array_pushl(&cp.args, + "test-tool", argv0, "inherited-handle-child", NULL); + cp.in = -1; + cp.no_stdout = cp.no_stderr = 1; + if (start_command(&cp) < 0) + die("Could not start child process"); + + /* Then close it, and try to delete it. */ + close(tmp); + if (unlink(path)) + die("Could not delete '%s'", path); + + if (close(cp.in) < 0 || finish_command(&cp) < 0) + die("Child did not finish"); + + return 0; +} + +static int inherit_handle_child(void) +{ + struct strbuf buf = STRBUF_INIT; + + if (strbuf_read(&buf, 0, 0) < 0) + die("Could not read stdin"); + printf("Received %s\n", buf.buf); + strbuf_release(&buf); + + return 0; +} + int cmd__run_command(int argc, const char **argv) { struct child_process proc = CHILD_PROCESS_INIT; int jobs; + if (argc > 1 && !strcmp(argv[1], "testsuite")) + exit(testsuite(argc - 1, argv + 1)); + if (!strcmp(argv[1], "inherited-handle")) + exit(inherit_handle(argv[0])); + if (!strcmp(argv[1], "inherited-handle-child")) + exit(inherit_handle_child()); + if (argc >= 2 && !strcmp(argv[1], "quote-stress-test")) return !!quote_stress_test(argc - 1, argv + 1); diff --git a/t/helper/test-serve-v2.c b/t/helper/test-serve-v2.c new file mode 100644 index 0000000..aee35e5 --- /dev/null +++ b/t/helper/test-serve-v2.c @@ -0,0 +1,31 @@ +#include "test-tool.h" +#include "cache.h" +#include "parse-options.h" +#include "serve.h" + +static char const * const serve_usage[] = { + N_("test-tool serve-v2 [<options>]"), + NULL +}; + +int cmd__serve_v2(int argc, const char **argv) +{ + struct serve_options opts = SERVE_OPTIONS_INIT; + + struct option options[] = { + OPT_BOOL(0, "stateless-rpc", &opts.stateless_rpc, + N_("quit after a single request/response exchange")), + OPT_BOOL(0, "advertise-capabilities", &opts.advertise_capabilities, + N_("exit immediately after advertising capabilities")), + OPT_END() + }; + const char *prefix = setup_git_directory(); + + /* ignore all unknown cmdline switches for now */ + argc = parse_options(argc, argv, prefix, options, serve_usage, + PARSE_OPT_KEEP_DASHDASH | + PARSE_OPT_KEEP_UNKNOWN); + serve(&opts); + + return 0; +} diff --git a/t/helper/test-sha1.c b/t/helper/test-sha1.c index 1ba0675..d860c38 100644 --- a/t/helper/test-sha1.c +++ b/t/helper/test-sha1.c @@ -3,55 +3,5 @@ int cmd__sha1(int ac, const char **av) { - git_SHA_CTX ctx; - unsigned char sha1[20]; - unsigned bufsz = 8192; - int binary = 0; - char *buffer; - - if (ac == 2) { - if (!strcmp(av[1], "-b")) - binary = 1; - else - bufsz = strtoul(av[1], NULL, 10) * 1024 * 1024; - } - - if (!bufsz) - bufsz = 8192; - - while ((buffer = malloc(bufsz)) == NULL) { - fprintf(stderr, "bufsz %u is too big, halving...\n", bufsz); - bufsz /= 2; - if (bufsz < 1024) - die("OOPS"); - } - - git_SHA1_Init(&ctx); - - while (1) { - ssize_t sz, this_sz; - char *cp = buffer; - unsigned room = bufsz; - this_sz = 0; - while (room) { - sz = xread(0, cp, room); - if (sz == 0) - break; - if (sz < 0) - die_errno("test-sha1"); - this_sz += sz; - cp += sz; - room -= sz; - } - if (this_sz == 0) - break; - git_SHA1_Update(&ctx, buffer, this_sz); - } - git_SHA1_Final(sha1, &ctx); - - if (binary) - fwrite(sha1, 1, 20, stdout); - else - puts(sha1_to_hex(sha1)); - exit(0); + return cmd_hash_impl(ac, av, GIT_HASH_SHA1); } diff --git a/t/helper/test-sha256.c b/t/helper/test-sha256.c new file mode 100644 index 0000000..0ac6a99 --- /dev/null +++ b/t/helper/test-sha256.c @@ -0,0 +1,7 @@ +#include "test-tool.h" +#include "cache.h" + +int cmd__sha256(int ac, const char **av) +{ + return cmd_hash_impl(ac, av, GIT_HASH_SHA256); +} diff --git a/t/helper/test-sigchain.c b/t/helper/test-sigchain.c index 77ac5bc..d013bcc 100644 --- a/t/helper/test-sigchain.c +++ b/t/helper/test-sigchain.c @@ -14,7 +14,8 @@ X(two) X(three) #undef X -int cmd__sigchain(int argc, const char **argv) { +int cmd__sigchain(int argc, const char **argv) +{ sigchain_push(SIGTERM, one); sigchain_push(SIGTERM, two); sigchain_push(SIGTERM, three); diff --git a/t/helper/test-submodule-nested-repo-config.c b/t/helper/test-submodule-nested-repo-config.c index a31e2a9..bc97929 100644 --- a/t/helper/test-submodule-nested-repo-config.c +++ b/t/helper/test-submodule-nested-repo-config.c @@ -10,19 +10,21 @@ static void die_usage(int argc, const char **argv, const char *msg) int cmd__submodule_nested_repo_config(int argc, const char **argv) { - struct repository submodule; + struct repository subrepo; + const struct submodule *sub; if (argc < 3) die_usage(argc, argv, "Wrong number of arguments."); setup_git_directory(); - if (repo_submodule_init(&submodule, the_repository, argv[1])) { + sub = submodule_from_path(the_repository, &null_oid, argv[1]); + if (repo_submodule_init(&subrepo, the_repository, sub)) { die_usage(argc, argv, "Submodule not found."); } /* Read the config of _child_ submodules. */ - print_config_from_gitmodules(&submodule, argv[2]); + print_config_from_gitmodules(&subrepo, argv[2]); submodule_free(the_repository); diff --git a/t/helper/test-tool.c b/t/helper/test-tool.c index bfb195b..c9a232d 100644 --- a/t/helper/test-tool.c +++ b/t/helper/test-tool.c @@ -1,5 +1,12 @@ #include "git-compat-util.h" #include "test-tool.h" +#include "trace2.h" +#include "parse-options.h" + +static const char * const test_tool_usage[] = { + "test-tool [-C <directory>] <command [<arguments>...]]", + NULL +}; struct test_cmd { const char *name; @@ -12,6 +19,7 @@ static struct test_cmd cmds[] = { { "ctype", cmd__ctype }, { "date", cmd__date }, { "delta", cmd__delta }, + { "dir-iterator", cmd__dir_iterator }, { "drop-caches", cmd__drop_caches }, { "dump-cache-tree", cmd__dump_cache_tree }, { "dump-fsmonitor", cmd__dump_fsmonitor }, @@ -19,20 +27,26 @@ static struct test_cmd cmds[] = { { "dump-untracked-cache", cmd__dump_untracked_cache }, { "example-decorate", cmd__example_decorate }, { "genrandom", cmd__genrandom }, + { "genzeros", cmd__genzeros }, { "hashmap", cmd__hashmap }, + { "hash-speed", cmd__hash_speed }, { "index-version", cmd__index_version }, { "json-writer", cmd__json_writer }, { "lazy-init-name-hash", cmd__lazy_init_name_hash }, { "match-trees", cmd__match_trees }, { "mergesort", cmd__mergesort }, { "mktemp", cmd__mktemp }, + { "oidmap", cmd__oidmap }, { "online-cpus", cmd__online_cpus }, { "parse-options", cmd__parse_options }, + { "parse-pathspec-file", cmd__parse_pathspec_file }, { "path-utils", cmd__path_utils }, { "pkt-line", cmd__pkt_line }, { "prio-queue", cmd__prio_queue }, + { "progress", cmd__progress }, { "reach", cmd__reach }, { "read-cache", cmd__read_cache }, + { "read-graph", cmd__read_graph }, { "read-midx", cmd__read_midx }, { "ref-store", cmd__ref_store }, { "regex", cmd__regex }, @@ -40,15 +54,19 @@ static struct test_cmd cmds[] = { { "revision-walking", cmd__revision_walking }, { "run-command", cmd__run_command }, { "scrap-cache-tree", cmd__scrap_cache_tree }, + { "serve-v2", cmd__serve_v2 }, { "sha1", cmd__sha1 }, { "sha1-array", cmd__sha1_array }, + { "sha256", cmd__sha256 }, { "sigchain", cmd__sigchain }, { "strcmp-offset", cmd__strcmp_offset }, { "string-list", cmd__string_list }, { "submodule-config", cmd__submodule_config }, { "submodule-nested-repo-config", cmd__submodule_nested_repo_config }, { "subprocess", cmd__subprocess }, + { "trace2", cmd__trace2 }, { "urlmatch-normalization", cmd__urlmatch_normalization }, + { "xml-encode", cmd__xml_encode }, { "wildmatch", cmd__wildmatch }, #ifdef GIT_WINDOWS_NATIVE { "windows-named-pipe", cmd__windows_named_pipe }, @@ -69,15 +87,30 @@ static NORETURN void die_usage(void) int cmd_main(int argc, const char **argv) { int i; + const char *working_directory = NULL; + struct option options[] = { + OPT_STRING('C', NULL, &working_directory, "directory", + "change the working directory"), + OPT_END() + }; BUG_exit_code = 99; + argc = parse_options(argc, argv, NULL, options, test_tool_usage, + PARSE_OPT_STOP_AT_NON_OPTION | + PARSE_OPT_KEEP_ARGV0); + if (argc < 2) die_usage(); + if (working_directory && chdir(working_directory) < 0) + die("Could not cd to '%s'", working_directory); + for (i = 0; i < ARRAY_SIZE(cmds); i++) { if (!strcmp(cmds[i].name, argv[1])) { argv++; argc--; + trace2_cmd_name(cmds[i].name); + trace2_cmd_list_config(); return cmds[i].fn(argc, argv); } } diff --git a/t/helper/test-tool.h b/t/helper/test-tool.h index 042f124..c8549fd 100644 --- a/t/helper/test-tool.h +++ b/t/helper/test-tool.h @@ -1,6 +1,7 @@ #ifndef TEST_TOOL_H #define TEST_TOOL_H +#define USE_THE_INDEX_COMPATIBILITY_MACROS #include "git-compat-util.h" int cmd__chmtime(int argc, const char **argv); @@ -8,6 +9,7 @@ int cmd__config(int argc, const char **argv); int cmd__ctype(int argc, const char **argv); int cmd__date(int argc, const char **argv); int cmd__delta(int argc, const char **argv); +int cmd__dir_iterator(int argc, const char **argv); int cmd__drop_caches(int argc, const char **argv); int cmd__dump_cache_tree(int argc, const char **argv); int cmd__dump_fsmonitor(int argc, const char **argv); @@ -15,20 +17,26 @@ int cmd__dump_split_index(int argc, const char **argv); int cmd__dump_untracked_cache(int argc, const char **argv); int cmd__example_decorate(int argc, const char **argv); int cmd__genrandom(int argc, const char **argv); +int cmd__genzeros(int argc, const char **argv); int cmd__hashmap(int argc, const char **argv); +int cmd__hash_speed(int argc, const char **argv); int cmd__index_version(int argc, const char **argv); int cmd__json_writer(int argc, const char **argv); int cmd__lazy_init_name_hash(int argc, const char **argv); int cmd__match_trees(int argc, const char **argv); int cmd__mergesort(int argc, const char **argv); int cmd__mktemp(int argc, const char **argv); +int cmd__oidmap(int argc, const char **argv); int cmd__online_cpus(int argc, const char **argv); int cmd__parse_options(int argc, const char **argv); +int cmd__parse_pathspec_file(int argc, const char** argv); int cmd__path_utils(int argc, const char **argv); int cmd__pkt_line(int argc, const char **argv); int cmd__prio_queue(int argc, const char **argv); +int cmd__progress(int argc, const char **argv); int cmd__reach(int argc, const char **argv); int cmd__read_cache(int argc, const char **argv); +int cmd__read_graph(int argc, const char **argv); int cmd__read_midx(int argc, const char **argv); int cmd__ref_store(int argc, const char **argv); int cmd__regex(int argc, const char **argv); @@ -36,19 +44,25 @@ int cmd__repository(int argc, const char **argv); int cmd__revision_walking(int argc, const char **argv); int cmd__run_command(int argc, const char **argv); int cmd__scrap_cache_tree(int argc, const char **argv); +int cmd__serve_v2(int argc, const char **argv); int cmd__sha1(int argc, const char **argv); int cmd__sha1_array(int argc, const char **argv); +int cmd__sha256(int argc, const char **argv); int cmd__sigchain(int argc, const char **argv); int cmd__strcmp_offset(int argc, const char **argv); int cmd__string_list(int argc, const char **argv); int cmd__submodule_config(int argc, const char **argv); int cmd__submodule_nested_repo_config(int argc, const char **argv); int cmd__subprocess(int argc, const char **argv); +int cmd__trace2(int argc, const char **argv); int cmd__urlmatch_normalization(int argc, const char **argv); +int cmd__xml_encode(int argc, const char **argv); int cmd__wildmatch(int argc, const char **argv); #ifdef GIT_WINDOWS_NATIVE int cmd__windows_named_pipe(int argc, const char **argv); #endif int cmd__write_cache(int argc, const char **argv); +int cmd_hash_impl(int ac, const char **av, int algo); + #endif diff --git a/t/helper/test-trace2.c b/t/helper/test-trace2.c new file mode 100644 index 0000000..197819c --- /dev/null +++ b/t/helper/test-trace2.c @@ -0,0 +1,273 @@ +#include "test-tool.h" +#include "cache.h" +#include "argv-array.h" +#include "run-command.h" +#include "exec-cmd.h" +#include "config.h" + +typedef int(fn_unit_test)(int argc, const char **argv); + +struct unit_test { + fn_unit_test *ut_fn; + const char *ut_name; + const char *ut_usage; +}; + +#define MyOk 0 +#define MyError 1 + +static int get_i(int *p_value, const char *data) +{ + char *endptr; + + if (!data || !*data) + return MyError; + + *p_value = strtol(data, &endptr, 10); + if (*endptr || errno == ERANGE) + return MyError; + + return MyOk; +} + +/* + * Cause process to exit with the requested value via "return". + * + * Rely on test-tool.c:cmd_main() to call trace2_cmd_exit() + * with our result. + * + * Test harness can confirm: + * [] the process-exit value. + * [] the "code" field in the "exit" trace2 event. + * [] the "code" field in the "atexit" trace2 event. + * [] the "name" field in the "cmd_name" trace2 event. + * [] "def_param" events for all of the "interesting" pre-defined + * config settings. + */ +static int ut_001return(int argc, const char **argv) +{ + int rc; + + if (get_i(&rc, argv[0])) + die("expect <exit_code>"); + + return rc; +} + +/* + * Cause the process to exit with the requested value via "exit()". + * + * Test harness can confirm: + * [] the "code" field in the "exit" trace2 event. + * [] the "code" field in the "atexit" trace2 event. + * [] the "name" field in the "cmd_name" trace2 event. + * [] "def_param" events for all of the "interesting" pre-defined + * config settings. + */ +static int ut_002exit(int argc, const char **argv) +{ + int rc; + + if (get_i(&rc, argv[0])) + die("expect <exit_code>"); + + exit(rc); +} + +/* + * Send an "error" event with each value in argv. Normally, git only issues + * a single "error" event immediately before issuing an "exit" event (such + * as in die() or BUG()), but multiple "error" events are allowed. + * + * Test harness can confirm: + * [] a trace2 "error" event for each value in argv. + * [] the "name" field in the "cmd_name" trace2 event. + * [] (optional) the file:line in the "exit" event refers to this function. + */ +static int ut_003error(int argc, const char **argv) +{ + int k; + + if (!argv[0] || !*argv[0]) + die("expect <error_message>"); + + for (k = 0; k < argc; k++) + error("%s", argv[k]); + + return 0; +} + +/* + * Run a child process and wait for it to finish and exit with its return code. + * test-tool trace2 004child [<child-command-line>] + * + * For example: + * test-tool trace2 004child git version + * test-tool trace2 004child test-tool trace2 001return 0 + * test-tool trace2 004child test-tool trace2 004child test-tool trace2 004child + * test-tool trace2 004child git -c alias.xyz=version xyz + * + * Test harness can confirm: + * [] the "name" field in the "cmd_name" trace2 event. + * [] that the outer process has a single component SID (or depth "d0" in + * the PERF stream). + * [] that "child_start" and "child_exit" events are generated for the child. + * [] if the child process is an instrumented executable: + * [] that "version", "start", ..., "exit", and "atexit" events are + * generated by the child process. + * [] that the child process events have a multiple component SID (or + * depth "dN+1" in the PERF stream). + * [] that the child exit code is propagated to the parent process "exit" + * and "atexit" events.. + * [] (optional) that the "t_abs" field in the child process "atexit" event + * is less than the "t_rel" field in the "child_exit" event of the parent + * process. + * [] if the child process is like the alias example above, + * [] (optional) the child process attempts to run "git-xyx" as a dashed + * command. + * [] the child process emits an "alias" event with "xyz" => "version" + * [] the child process runs "git version" as a child process. + * [] the child process has a 3 component SID (or depth "d2" in the PERF + * stream). + */ +static int ut_004child(int argc, const char **argv) +{ + int result; + + /* + * Allow empty <child_command_line> so we can do arbitrarily deep + * command nesting and let the last one be null. + */ + if (!argc) + return 0; + + result = run_command_v_opt(argv, 0); + exit(result); +} + +/* + * Exec a git command. This may either create a child process (Windows) + * or replace the existing process. + * test-tool trace2 005exec <git_command_args> + * + * For example: + * test-tool trace2 005exec version + * + * Test harness can confirm (on Windows): + * [] the "name" field in the "cmd_name" trace2 event. + * [] that the outer process has a single component SID (or depth "d0" in + * the PERF stream). + * [] that "exec" and "exec_result" events are generated for the child + * process (since the Windows compatibility layer fakes an exec() with + * a CreateProcess(), WaitForSingleObject(), and exit()). + * [] that the child process has multiple component SID (or depth "dN+1" + * in the PERF stream). + * + * Test harness can confirm (on platforms with a real exec() function): + * [] TODO talk about process replacement and how it affects SID. + */ +static int ut_005exec(int argc, const char **argv) +{ + int result; + + if (!argc) + return 0; + + result = execv_git_cmd(argv); + return result; +} + +static int ut_006data(int argc, const char **argv) +{ + const char *usage_error = + "expect <cat0> <k0> <v0> [<cat1> <k1> <v1> [...]]"; + + if (argc % 3 != 0) + die("%s", usage_error); + + while (argc) { + if (!argv[0] || !*argv[0] || !argv[1] || !*argv[1] || + !argv[2] || !*argv[2]) + die("%s", usage_error); + + trace2_data_string(argv[0], the_repository, argv[1], argv[2]); + argv += 3; + argc -= 3; + } + + return 0; +} + +/* + * Usage: + * test-tool trace2 <ut_name_1> <ut_usage_1> + * test-tool trace2 <ut_name_2> <ut_usage_2> + * ... + */ +#define USAGE_PREFIX "test-tool trace2" + +/* clang-format off */ +static struct unit_test ut_table[] = { + { ut_001return, "001return", "<exit_code>" }, + { ut_002exit, "002exit", "<exit_code>" }, + { ut_003error, "003error", "<error_message>+" }, + { ut_004child, "004child", "[<child_command_line>]" }, + { ut_005exec, "005exec", "<git_command_args>" }, + { ut_006data, "006data", "[<category> <key> <value>]+" }, +}; +/* clang-format on */ + +/* clang-format off */ +#define for_each_ut(k, ut_k) \ + for (k = 0, ut_k = &ut_table[k]; \ + k < ARRAY_SIZE(ut_table); \ + k++, ut_k = &ut_table[k]) +/* clang-format on */ + +static int print_usage(void) +{ + int k; + struct unit_test *ut_k; + + fprintf(stderr, "usage:\n"); + for_each_ut (k, ut_k) + fprintf(stderr, "\t%s %s %s\n", USAGE_PREFIX, ut_k->ut_name, + ut_k->ut_usage); + + return 129; +} + +/* + * Issue various trace2 events for testing. + * + * We assume that these trace2 routines has already been called: + * [] trace2_initialize() [common-main.c:main()] + * [] trace2_cmd_start() [common-main.c:main()] + * [] trace2_cmd_name() [test-tool.c:cmd_main()] + * [] tracd2_cmd_list_config() [test-tool.c:cmd_main()] + * So that: + * [] the various trace2 streams are open. + * [] the process SID has been created. + * [] the "version" event has been generated. + * [] the "start" event has been generated. + * [] the "cmd_name" event has been generated. + * [] this writes various "def_param" events for interesting config values. + * + * We further assume that if we return (rather than exit()), trace2_cmd_exit() + * will be called by test-tool.c:cmd_main(). + */ +int cmd__trace2(int argc, const char **argv) +{ + int k; + struct unit_test *ut_k; + + argc--; /* skip over "trace2" arg */ + argv++; + + if (argc) + for_each_ut (k, ut_k) + if (!strcmp(argv[0], ut_k->ut_name)) + return ut_k->ut_fn(argc - 1, argv + 1); + + return print_usage(); +} diff --git a/t/helper/test-windows-named-pipe.c b/t/helper/test-windows-named-pipe.c index b4b752b..ae52183 100644 --- a/t/helper/test-windows-named-pipe.c +++ b/t/helper/test-windows-named-pipe.c @@ -19,7 +19,7 @@ int cmd__windows_named_pipe(int argc, const char **argv) if (argc < 2) goto print_usage; filename = argv[1]; - if (strchr(filename, '/') || strchr(filename, '\\')) + if (strpbrk(filename, "/\\")) goto print_usage; strbuf_addf(&pathname, "//./pipe/%s", filename); diff --git a/t/helper/test-xml-encode.c b/t/helper/test-xml-encode.c new file mode 100644 index 0000000..a648bbd --- /dev/null +++ b/t/helper/test-xml-encode.c @@ -0,0 +1,80 @@ +#include "test-tool.h" + +static const char *utf8_replace_character = "�"; + +/* + * Encodes (possibly incorrect) UTF-8 on <stdin> to <stdout>, to be embedded + * in an XML file. + */ +int cmd__xml_encode(int argc, const char **argv) +{ + unsigned char buf[1024], tmp[4], *tmp2 = NULL; + ssize_t cur = 0, len = 1, remaining = 0; + unsigned char ch; + + for (;;) { + if (++cur == len) { + len = xread(0, buf, sizeof(buf)); + if (!len) + return 0; + if (len < 0) + die_errno("Could not read <stdin>"); + cur = 0; + } + ch = buf[cur]; + + if (tmp2) { + if ((ch & 0xc0) != 0x80) { + fputs(utf8_replace_character, stdout); + tmp2 = NULL; + cur--; + continue; + } + *tmp2 = ch; + tmp2++; + if (--remaining == 0) { + fwrite(tmp, tmp2 - tmp, 1, stdout); + tmp2 = NULL; + } + continue; + } + + if (!(ch & 0x80)) { + /* 0xxxxxxx */ + if (ch == '&') + fputs("&", stdout); + else if (ch == '\'') + fputs("'", stdout); + else if (ch == '"') + fputs(""", stdout); + else if (ch == '<') + fputs("<", stdout); + else if (ch == '>') + fputs(">", stdout); + else if (ch >= 0x20) + fputc(ch, stdout); + else if (ch == 0x09 || ch == 0x0a || ch == 0x0d) + fprintf(stdout, "&#x%02x;", ch); + else + fputs(utf8_replace_character, stdout); + } else if ((ch & 0xe0) == 0xc0) { + /* 110XXXXx 10xxxxxx */ + tmp[0] = ch; + remaining = 1; + tmp2 = tmp + 1; + } else if ((ch & 0xf0) == 0xe0) { + /* 1110XXXX 10Xxxxxx 10xxxxxx */ + tmp[0] = ch; + remaining = 2; + tmp2 = tmp + 1; + } else if ((ch & 0xf8) == 0xf0) { + /* 11110XXX 10XXxxxx 10xxxxxx 10xxxxxx */ + tmp[0] = ch; + remaining = 3; + tmp2 = tmp + 1; + } else + fputs(utf8_replace_character, stdout); + } + + return 0; +} diff --git a/t/interop/i5500-git-daemon.sh b/t/interop/i5500-git-daemon.sh index 1daf694..4d22e42 100755 --- a/t/interop/i5500-git-daemon.sh +++ b/t/interop/i5500-git-daemon.sh @@ -37,5 +37,4 @@ test_expect_success "fetch with $VERSION_B" ' test_cmp expect actual ' -stop_git_daemon test_done diff --git a/t/lib-bash.sh b/t/lib-bash.sh index 2be955f..b0b6060 100644 --- a/t/lib-bash.sh +++ b/t/lib-bash.sh @@ -2,10 +2,12 @@ # to run under Bash; primarily intended for tests of the completion # script. -if test -n "$BASH" && test -z "$POSIXLY_CORRECT"; then +if test -n "$BASH" && test -z "$POSIXLY_CORRECT" +then # we are in full-on bash mode true -elif type bash >/dev/null 2>&1; then +elif type bash >/dev/null 2>&1 +then # execute in full-on bash mode unset POSIXLY_CORRECT exec bash "$0" "$@" diff --git a/t/lib-git-daemon.sh b/t/lib-git-daemon.sh index f98de95..e625692 100644 --- a/t/lib-git-daemon.sh +++ b/t/lib-git-daemon.sh @@ -13,11 +13,9 @@ # # test_expect_success ... # -# stop_git_daemon # test_done -test_tristate GIT_TEST_GIT_DAEMON -if test "$GIT_TEST_GIT_DAEMON" = false +if ! test_bool_env GIT_TEST_GIT_DAEMON true then skip_all="git-daemon testing disabled (unset GIT_TEST_GIT_DAEMON to enable)" test_done @@ -25,16 +23,18 @@ fi if test_have_prereq !PIPE then - test_skip_or_die $GIT_TEST_GIT_DAEMON "file system does not support FIFOs" + test_skip_or_die GIT_TEST_GIT_DAEMON "file system does not support FIFOs" fi -LIB_GIT_DAEMON_PORT=${LIB_GIT_DAEMON_PORT-${this_test#t}} +test_set_port LIB_GIT_DAEMON_PORT GIT_DAEMON_PID= +GIT_DAEMON_PIDFILE="$PWD"/daemon.pid GIT_DAEMON_DOCUMENT_ROOT_PATH="$PWD"/repo GIT_DAEMON_HOST_PORT=127.0.0.1:$LIB_GIT_DAEMON_PORT GIT_DAEMON_URL=git://$GIT_DAEMON_HOST_PORT +registered_stop_git_daemon_atexit_handler= start_git_daemon() { if test -n "$GIT_DAEMON_PID" then @@ -43,38 +43,36 @@ start_git_daemon() { mkdir -p "$GIT_DAEMON_DOCUMENT_ROOT_PATH" - trap 'code=$?; stop_git_daemon; (exit $code); die' EXIT + # One of the test scripts stops and then re-starts 'git daemon'. + # Don't register and then run the same atexit handlers several times. + if test -z "$registered_stop_git_daemon_atexit_handler" + then + test_atexit 'stop_git_daemon' + registered_stop_git_daemon_atexit_handler=AlreadyDone + fi say >&3 "Starting git daemon ..." mkfifo git_daemon_output ${LIB_GIT_DAEMON_COMMAND:-git daemon} \ --listen=127.0.0.1 --port="$LIB_GIT_DAEMON_PORT" \ - --reuseaddr --verbose \ + --reuseaddr --verbose --pid-file="$GIT_DAEMON_PIDFILE" \ --base-path="$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ "$@" "$GIT_DAEMON_DOCUMENT_ROOT_PATH" \ >&3 2>git_daemon_output & GIT_DAEMON_PID=$! - >daemon.log { read -r line <&7 - printf "%s\n" "$line" - printf >&4 "%s\n" "$line" - ( - while read -r line <&7 - do - printf "%s\n" "$line" - printf >&4 "%s\n" "$line" - done - ) & - } 7<git_daemon_output >>"$TRASH_DIRECTORY/daemon.log" && + printf "%s\n" "$line" >&4 + cat <&7 >&4 & + } 7<git_daemon_output && # Check expected output if test x"$(expr "$line" : "\[[0-9]*\] \(.*\)")" != x"Ready to rumble" then kill "$GIT_DAEMON_PID" wait "$GIT_DAEMON_PID" - trap 'die' EXIT - test_skip_or_die $GIT_TEST_GIT_DAEMON \ + unset GIT_DAEMON_PID + test_skip_or_die GIT_TEST_GIT_DAEMON \ "git daemon failed to start" fi } @@ -85,8 +83,6 @@ stop_git_daemon() { return fi - trap 'die' EXIT - # kill git-daemon child of git say >&3 "Stopping git daemon ..." kill "$GIT_DAEMON_PID" @@ -96,8 +92,9 @@ stop_git_daemon() { then error "git daemon exited with status: $ret" fi + kill "$(cat "$GIT_DAEMON_PIDFILE")" 2>/dev/null GIT_DAEMON_PID= - rm -f git_daemon_output + rm -f git_daemon_output "$GIT_DAEMON_PIDFILE" } # A stripped-down version of a netcat client, that connects to a "host:port" diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index c275994..5aff2ab 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -44,23 +44,7 @@ native_path () { echo "$path" } -# On Solaris the 'date +%s' function is not supported and therefore we -# need this replacement. -# Attention: This function is not safe again against time offset updates -# at runtime (e.g. via NTP). The 'clock_gettime(CLOCK_MONOTONIC)' -# function could fix that but it is not in Python until 3.3. -time_in_seconds () { - (cd / && "$PYTHON_PATH" -c 'import time; print(int(time.time()))') -} - -# Try to pick a unique port: guess a large number, then hope -# no more than one of each test is running. -# -# This does not handle the case where somebody else is running the -# same tests and has chosen the same ports. -testid=${this_test#t} -git_p4_test_start=9800 -P4DPORT=$((10669 + ($testid - $git_p4_test_start))) +test_set_port P4DPORT P4PORT=localhost:$P4DPORT P4CLIENT=client @@ -74,14 +58,9 @@ cli="$TRASH_DIRECTORY/cli" git="$TRASH_DIRECTORY/git" pidfile="$TRASH_DIRECTORY/p4d.pid" -# Sometimes "prove" seems to hang on exit because p4d is still running -cleanup () { - if test -f "$pidfile" - then - kill -9 $(cat "$pidfile") 2>/dev/null && exit 255 - fi +stop_p4d_and_watchdog () { + kill -9 $p4d_pid $watchdog_pid } -trap cleanup EXIT # git p4 submit generates a temp file, which will # not get cleaned up if the submission fails. Don't @@ -89,7 +68,16 @@ trap cleanup EXIT TMPDIR="$TRASH_DIRECTORY" export TMPDIR +registered_stop_p4d_atexit_handler= start_p4d () { + # One of the test scripts stops and then re-starts p4d. + # Don't register and then run the same atexit handlers several times. + if test -z "$registered_stop_p4d_atexit_handler" + then + test_atexit 'stop_p4d_and_watchdog' + registered_stop_p4d_atexit_handler=AlreadyDone + fi + mkdir -p "$db" "$cli" "$git" && rm -f "$pidfile" && ( @@ -99,6 +87,7 @@ start_p4d () { echo $! >"$pidfile" } ) && + p4d_pid=$(cat "$pidfile") # This gives p4d a long time to start up, as it can be # quite slow depending on the machine. Set this environment @@ -106,18 +95,18 @@ start_p4d () { # an automated test setup. If the p4d process dies, that # will be caught with the "kill -0" check below. i=${P4D_START_PATIENCE:-300} - pid=$(cat "$pidfile") - timeout=$(($(time_in_seconds) + $P4D_TIMEOUT)) + nr_tries_left=$P4D_TIMEOUT while true do - if test $(time_in_seconds) -gt $timeout + if test $nr_tries_left -eq 0 then - kill -9 $pid + kill -9 $p4d_pid exit 1 fi sleep 1 - done & + nr_tries_left=$(($nr_tries_left - 1)) + done 2>/dev/null 4>&2 & watchdog_pid=$! ready= @@ -130,7 +119,7 @@ start_p4d () { break fi # fail if p4d died - kill -0 $pid 2>/dev/null || break + kill -0 $p4d_pid 2>/dev/null || break echo waiting for p4d to start sleep 1 i=$(( $i - 1 )) @@ -170,34 +159,23 @@ p4_add_job () { } retry_until_success () { - timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) - until "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout - do - sleep 1 - done -} - -retry_until_fail () { - timeout=$(($(time_in_seconds) + $RETRY_TIMEOUT)) - until ! "$@" 2>/dev/null || test $(time_in_seconds) -gt $timeout + nr_tries_left=$RETRY_TIMEOUT + until "$@" 2>/dev/null || test $nr_tries_left -eq 0 do sleep 1 + nr_tries_left=$(($nr_tries_left - 1)) done } -kill_p4d () { - pid=$(cat "$pidfile") - retry_until_fail kill $pid - retry_until_fail kill -9 $pid - # complain if it would not die - test_must_fail kill $pid >/dev/null 2>&1 && - rm -rf "$db" "$cli" "$pidfile" && - retry_until_fail kill -9 $watchdog_pid +stop_and_cleanup_p4d () { + kill -9 $p4d_pid $watchdog_pid + wait $p4d_pid + rm -rf "$db" "$cli" "$pidfile" } cleanup_git () { retry_until_success rm -r "$git" - test_must_fail test -d "$git" && + test_path_is_missing "$git" && retry_until_success mkdir "$git" } diff --git a/t/lib-git-svn.sh b/t/lib-git-svn.sh index a8130f9..7d248e6 100644 --- a/t/lib-git-svn.sh +++ b/t/lib-git-svn.sh @@ -13,6 +13,7 @@ fi GIT_DIR=$PWD/.git GIT_SVN_DIR=$GIT_DIR/svn/refs/remotes/git-svn SVN_TREE=$GIT_SVN_DIR/svn-tree +test_set_port SVNSERVE_PORT svn >/dev/null 2>&1 if test $? -ne 1 @@ -68,19 +69,12 @@ svn_cmd () { maybe_start_httpd () { loc=${1-svn} - test_tristate GIT_SVN_TEST_HTTPD - case $GIT_SVN_TEST_HTTPD in - true) + if test_bool_env GIT_TEST_SVN_HTTPD false + then . "$TEST_DIRECTORY"/lib-httpd.sh LIB_HTTPD_SVN="$loc" start_httpd - ;; - *) - stop_httpd () { - : noop - } - ;; - esac + fi } convert_to_rev_db () { @@ -110,8 +104,7 @@ EOF } require_svnserve () { - test_tristate GIT_TEST_SVNSERVE - if ! test "$GIT_TEST_SVNSERVE" = true + if ! test_bool_env GIT_TEST_SVNSERVE false then skip_all='skipping svnserve test. (set $GIT_TEST_SVNSERVE to enable)' test_done @@ -119,7 +112,6 @@ require_svnserve () { } start_svnserve () { - SVNSERVE_PORT=${SVNSERVE_PORT-${this_test#t}} svnserve --listen-port $SVNSERVE_PORT \ --root "$rawsvnrepo" \ --listen-once \ diff --git a/t/lib-gpg.sh b/t/lib-gpg.sh index f1277be..8d28652 100755 --- a/t/lib-gpg.sh +++ b/t/lib-gpg.sh @@ -63,8 +63,7 @@ then cut -d" " -f4 | tr -d '\n' >"${GNUPGHOME}/trustlist.txt" && - echo " S relax" >> ${GNUPGHOME}/trustlist.txt && - (gpgconf --kill gpg-agent >/dev/null 2>&1 || : ) && + echo " S relax" >>"${GNUPGHOME}/trustlist.txt" && echo hello | gpgsm --homedir "${GNUPGHOME}" >/dev/null \ -u committer@example.com -o /dev/null --sign - 2>&1 && test_set_prereq GPGSM diff --git a/t/lib-httpd.sh b/t/lib-httpd.sh index a8729f8..1449ee9 100644 --- a/t/lib-httpd.sh +++ b/t/lib-httpd.sh @@ -14,7 +14,6 @@ # # test_expect_success ... # -# stop_httpd # test_done # # Can be configured using the following variables. @@ -42,15 +41,14 @@ then test_done fi -test_tristate GIT_TEST_HTTPD -if test "$GIT_TEST_HTTPD" = false +if ! test_bool_env GIT_TEST_HTTPD true then skip_all="Network testing disabled (unset GIT_TEST_HTTPD to enable)" test_done fi if ! test_have_prereq NOT_ROOT; then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Cannot run httpd tests as root" fi @@ -82,7 +80,7 @@ case $(uname) in esac LIB_HTTPD_PATH=${LIB_HTTPD_PATH-"$DEFAULT_HTTPD_PATH"} -LIB_HTTPD_PORT=${LIB_HTTPD_PORT-${this_test#t}} +test_set_port LIB_HTTPD_PORT TEST_PATH="$TEST_DIRECTORY"/lib-httpd HTTPD_ROOT_PATH="$PWD"/httpd @@ -91,11 +89,12 @@ HTTPD_DOCUMENT_ROOT_PATH=$HTTPD_ROOT_PATH/www # hack to suppress apache PassEnv warnings GIT_VALGRIND=$GIT_VALGRIND; export GIT_VALGRIND GIT_VALGRIND_OPTIONS=$GIT_VALGRIND_OPTIONS; export GIT_VALGRIND_OPTIONS +GIT_TEST_SIDEBAND_ALL=$GIT_TEST_SIDEBAND_ALL; export GIT_TEST_SIDEBAND_ALL GIT_TRACE=$GIT_TRACE; export GIT_TRACE if ! test -x "$LIB_HTTPD_PATH" then - test_skip_or_die $GIT_TEST_HTTPD "no web server found at '$LIB_HTTPD_PATH'" + test_skip_or_die GIT_TEST_HTTPD "no web server found at '$LIB_HTTPD_PATH'" fi HTTPD_VERSION=$($LIB_HTTPD_PATH -v | \ @@ -107,19 +106,19 @@ then then if ! test $HTTPD_VERSION -ge 2 then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "at least Apache version 2 is required" fi if ! test -d "$DEFAULT_HTTPD_MODULE_PATH" then - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Apache module directory not found" fi LIB_HTTPD_MODULE_PATH="$DEFAULT_HTTPD_MODULE_PATH" fi else - test_skip_or_die $GIT_TEST_HTTPD \ + test_skip_or_die GIT_TEST_HTTPD \ "Could not identify web server at '$LIB_HTTPD_PATH'" fi @@ -131,8 +130,9 @@ prepare_httpd() { mkdir -p "$HTTPD_DOCUMENT_ROOT_PATH" cp "$TEST_PATH"/passwd "$HTTPD_ROOT_PATH" install_script broken-smart-http.sh + install_script error-smart-http.sh install_script error.sh - install_script apply-one-time-sed.sh + install_script apply-one-time-perl.sh ln -s "$LIB_HTTPD_MODULE_PATH" "$HTTPD_ROOT_PATH/modules" @@ -174,7 +174,7 @@ prepare_httpd() { start_httpd() { prepare_httpd >&3 2>&4 - trap 'code=$?; stop_httpd; (exit $code); die' EXIT + test_atexit stop_httpd "$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \ -f "$TEST_PATH/apache.conf" $HTTPD_PARA \ @@ -182,15 +182,12 @@ start_httpd() { >&3 2>&4 if test $? -ne 0 then - trap 'die' EXIT cat "$HTTPD_ROOT_PATH"/error.log >&4 2>/dev/null - test_skip_or_die $GIT_TEST_HTTPD "web server setup failed" + test_skip_or_die GIT_TEST_HTTPD "web server setup failed" fi } stop_httpd() { - trap 'die' EXIT - "$LIB_HTTPD_PATH" -d "$HTTPD_ROOT_PATH" \ -f "$TEST_PATH/apache.conf" $HTTPD_PARA -k stop } diff --git a/t/lib-httpd/apache.conf b/t/lib-httpd/apache.conf index 581c010..994e529 100644 --- a/t/lib-httpd/apache.conf +++ b/t/lib-httpd/apache.conf @@ -76,8 +76,10 @@ PassEnv GIT_VALGRIND PassEnv GIT_VALGRIND_OPTIONS PassEnv GNUPGHOME PassEnv ASAN_OPTIONS +PassEnv LSAN_OPTIONS PassEnv GIT_TRACE PassEnv GIT_CONFIG_NOSYSTEM +PassEnv GIT_TEST_SIDEBAND_ALL SetEnvIf Git-Protocol ".*" GIT_PROTOCOL=$0 @@ -111,24 +113,29 @@ Alias /auth/dumb/ www/auth/dumb/ SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> -<LocationMatch /one_time_sed/> +<LocationMatch /one_time_perl/> SetEnv GIT_EXEC_PATH ${GIT_EXEC_PATH} SetEnv GIT_HTTP_EXPORT_ALL </LocationMatch> +ScriptAliasMatch /error_git_upload_pack/(.*)/git-upload-pack error.sh/ ScriptAliasMatch /smart_*[^/]*/(.*) ${GIT_EXEC_PATH}/git-http-backend/$1 ScriptAlias /broken_smart/ broken-smart-http.sh/ +ScriptAlias /error_smart/ error-smart-http.sh/ ScriptAlias /error/ error.sh/ -ScriptAliasMatch /one_time_sed/(.*) apply-one-time-sed.sh/$1 +ScriptAliasMatch /one_time_perl/(.*) apply-one-time-perl.sh/$1 <Directory ${GIT_EXEC_PATH}> Options FollowSymlinks </Directory> <Files broken-smart-http.sh> Options ExecCGI </Files> +<Files error-smart-http.sh> + Options ExecCGI +</Files> <Files error.sh> Options ExecCGI </Files> -<Files apply-one-time-sed.sh> +<Files apply-one-time-perl.sh> Options ExecCGI </Files> <Files ${GIT_EXEC_PATH}/git-http-backend> diff --git a/t/lib-httpd/apply-one-time-perl.sh b/t/lib-httpd/apply-one-time-perl.sh new file mode 100644 index 0000000..09a0abd --- /dev/null +++ b/t/lib-httpd/apply-one-time-perl.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +# If "one-time-perl" exists in $HTTPD_ROOT_PATH, run perl on the HTTP response, +# using the contents of "one-time-perl" as the perl command to be run. If the +# response was modified as a result, delete "one-time-perl" so that subsequent +# HTTP responses are no longer modified. +# +# This can be used to simulate the effects of the repository changing in +# between HTTP request-response pairs. +if test -f one-time-perl +then + LC_ALL=C + export LC_ALL + + "$GIT_EXEC_PATH/git-http-backend" >out + perl -pe "$(cat one-time-perl)" out >out_modified + + if cmp -s out out_modified + then + cat out + else + cat out_modified + rm one-time-perl + fi +else + "$GIT_EXEC_PATH/git-http-backend" +fi diff --git a/t/lib-httpd/apply-one-time-sed.sh b/t/lib-httpd/apply-one-time-sed.sh deleted file mode 100644 index fcef728..0000000 --- a/t/lib-httpd/apply-one-time-sed.sh +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh - -# If "one-time-sed" exists in $HTTPD_ROOT_PATH, run sed on the HTTP response, -# using the contents of "one-time-sed" as the sed command to be run. If the -# response was modified as a result, delete "one-time-sed" so that subsequent -# HTTP responses are no longer modified. -# -# This can be used to simulate the effects of the repository changing in -# between HTTP request-response pairs. -if [ -e one-time-sed ]; then - "$GIT_EXEC_PATH/git-http-backend" >out - sed "$(cat one-time-sed)" <out >out_modified - - if diff out out_modified >/dev/null; then - cat out - else - cat out_modified - rm one-time-sed - fi -else - "$GIT_EXEC_PATH/git-http-backend" -fi diff --git a/t/lib-httpd/error-smart-http.sh b/t/lib-httpd/error-smart-http.sh new file mode 100644 index 0000000..e65d447 --- /dev/null +++ b/t/lib-httpd/error-smart-http.sh @@ -0,0 +1,3 @@ +echo "Content-Type: application/x-git-upload-pack-advertisement" +echo +printf "%s" "0019ERR server-side error" diff --git a/t/lib-log-graph.sh b/t/lib-log-graph.sh new file mode 100755 index 0000000..1184cce --- /dev/null +++ b/t/lib-log-graph.sh @@ -0,0 +1,28 @@ +# Helps shared by the test scripts for comparing log graphs. + +sanitize_log_output () { + sed -e 's/ *$//' \ + -e 's/commit [0-9a-f]*$/commit COMMIT_OBJECT_NAME/' \ + -e 's/Merge: [ 0-9a-f]*$/Merge: MERGE_PARENTS/' \ + -e 's/Merge tag.*/Merge HEADS DESCRIPTION/' \ + -e 's/Merge commit.*/Merge HEADS DESCRIPTION/' \ + -e 's/index [0-9a-f]*\.\.[0-9a-f]*/index BEFORE..AFTER/' +} + +lib_test_cmp_graph () { + git log --graph "$@" >output && + sed 's/ *$//' >output.sanitized <output && + test_i18ncmp expect output.sanitized +} + +lib_test_cmp_short_graph () { + git log --graph --pretty=short "$@" >output && + sanitize_log_output >output.sanitized <output && + test_i18ncmp expect output.sanitized +} + +lib_test_cmp_colored_graph () { + git log --graph --color=always "$@" >output.colors.raw && + test_decode_color <output.colors.raw | sed "s/ *\$//" >output.colors && + test_cmp expect.colors output.colors +} diff --git a/t/lib-pack.sh b/t/lib-pack.sh index c4d907a..f346317 100644 --- a/t/lib-pack.sh +++ b/t/lib-pack.sh @@ -35,9 +35,11 @@ pack_header () { # have hardcoded some well-known objects. See the case statements below for the # complete list. pack_obj () { + test_oid_init + case "$1" in # empty blob - e69de29bb2d1d6434b8b29ae775ad8c2e48c5391) + $EMPTY_BLOB) case "$2" in '') printf '\060\170\234\003\0\0\0\0\1' @@ -47,7 +49,7 @@ pack_obj () { ;; # blob containing "\7\76" - e68fe8129b546b101aee9510c5328e7f21ca1d18) + $(test_oid packlib_7_76)) case "$2" in '') printf '\062\170\234\143\267\3\0\0\116\0\106' @@ -59,11 +61,18 @@ pack_obj () { printf '\234\143\142\142\142\267\003\0\0\151\0\114' return ;; + 37c8e2c15bb22b912e59b43fd51a4f7e9465ed0b5084c5a1411d991cbe630683) + printf '\165\67\310\342\301\133\262\53\221\56\131' && + printf '\264\77\325\32\117\176\224\145\355\13\120' && + printf '\204\305\241\101\35\231\34\276\143\6\203\170' && + printf '\234\143\142\142\142\267\003\0\0\151\0\114' + return + ;; esac ;; # blob containing "\7\0" - 01d7713666f4de822776c7622c10f1b07de280dc) + $(test_oid packlib_7_0)) case "$2" in '') printf '\062\170\234\143\147\0\0\0\20\0\10' @@ -75,6 +84,13 @@ pack_obj () { printf '\143\142\142\142\147\0\0\0\53\0\16' return ;; + 5d8e6fc40f2dab00e6983a48523fe57e621f46434cb58dbd4422fba03380d886) + printf '\165\135\216\157\304\17\55\253\0\346\230\72' && + printf '\110\122\77\345\176\142\37\106\103\114\265' && + printf '\215\275\104\42\373\240\63\200\330\206\170\234' && + printf '\143\142\142\142\147\0\0\0\53\0\16' + return + ;; esac ;; esac @@ -86,7 +102,7 @@ pack_obj () { then echo "$1" | git pack-objects --stdout >pack_obj.tmp && size=$(wc -c <pack_obj.tmp) && - dd if=pack_obj.tmp bs=1 count=$((size - 20 - 12)) skip=12 && + dd if=pack_obj.tmp bs=1 count=$((size - $(test_oid rawsz) - 12)) skip=12 && rm -f pack_obj.tmp return fi @@ -97,7 +113,8 @@ pack_obj () { # Compute and append pack trailer to "$1" pack_trailer () { - test-tool sha1 -b <"$1" >trailer.tmp && + test_oid_init && + test-tool $(test_oid algo) -b <"$1" >trailer.tmp && cat trailer.tmp >>"$1" && rm -f trailer.tmp } @@ -108,3 +125,11 @@ pack_trailer () { clear_packs () { rm -f .git/objects/pack/* } + +test_oid_cache <<-EOF +packlib_7_0 sha1:01d7713666f4de822776c7622c10f1b07de280dc +packlib_7_0 sha256:37c8e2c15bb22b912e59b43fd51a4f7e9465ed0b5084c5a1411d991cbe630683 + +packlib_7_76 sha1:e68fe8129b546b101aee9510c5328e7f21ca1d18 +packlib_7_76 sha256:5d8e6fc40f2dab00e6983a48523fe57e621f46434cb58dbd4422fba03380d886 +EOF diff --git a/t/lib-patch-mode.sh b/t/lib-patch-mode.sh index 06c3c91..cfd76bf 100644 --- a/t/lib-patch-mode.sh +++ b/t/lib-patch-mode.sh @@ -2,28 +2,40 @@ . ./test-lib.sh +# set_state <path> <worktree-content> <index-content> +# +# Prepare the content for path in worktree and the index as specified. set_state () { echo "$3" > "$1" && git add "$1" && echo "$2" > "$1" } +# save_state <path> +# +# Save index/worktree content of <path> in the files _worktree_<path> +# and _index_<path> save_state () { noslash="$(echo "$1" | tr / _)" && cat "$1" > _worktree_"$noslash" && git show :"$1" > _index_"$noslash" } +# set_and_save_state <path> <worktree-content> <index-content> set_and_save_state () { set_state "$@" && save_state "$1" } +# verify_state <path> <expected-worktree-content> <expected-index-content> verify_state () { test "$(cat "$1")" = "$2" && test "$(git show :"$1")" = "$3" } +# verify_saved_state <path> +# +# Call verify_state with expected contents from the last save_state verify_saved_state () { noslash="$(echo "$1" | tr / _)" && verify_state "$1" "$(cat _worktree_"$noslash")" "$(cat _index_"$noslash")" diff --git a/t/lib-rebase.sh b/t/lib-rebase.sh index 7ea30e5..b72c051 100644 --- a/t/lib-rebase.sh +++ b/t/lib-rebase.sh @@ -44,10 +44,10 @@ set_fake_editor () { rm -f "$1" echo 'rebase -i script before editing:' cat "$1".tmp - action=pick + action=\& for line in $FAKE_LINES; do case $line in - pick|p|squash|s|fixup|f|edit|e|reword|r|drop|d) + pick|p|squash|s|fixup|f|edit|e|reword|r|drop|d|label|l|reset|r|merge|m) action="$line";; exec_*|x_*|break|b) echo "$line" | sed 's/_/ /g' >> "$1";; @@ -58,11 +58,12 @@ set_fake_editor () { bad) action="badcmd";; fakesha) + test \& != "$action" || action=pick echo "$action XXXXXXX False commit" >> "$1" action=pick;; *) - sed -n "${line}s/^pick/$action/p" < "$1".tmp >> "$1" - action=pick;; + sed -n "${line}s/^[a-z][a-z]*/$action/p" < "$1".tmp >> "$1" + action=\&;; esac done echo 'rebase -i script after editing:' @@ -118,3 +119,31 @@ make_empty () { git commit --allow-empty -m "$1" && git tag "$1" } + +# Call this (inside test_expect_success) at the end of a test file to +# check that no tests have changed editor related environment +# variables or config settings +test_editor_unchanged () { + # We're only interested in exported variables hence 'sh -c' + sh -c 'cat >actual <<-EOF + EDITOR=$EDITOR + FAKE_COMMIT_AMEND=$FAKE_COMMIT_AMEND + FAKE_COMMIT_MESSAGE=$FAKE_COMMIT_MESSAGE + FAKE_LINES=$FAKE_LINES + GIT_EDITOR=$GIT_EDITOR + GIT_SEQUENCE_EDITOR=$GIT_SEQUENCE_EDITOR + core.editor=$(git config core.editor) + sequence.editor=$(git config sequence.editor) + EOF' + cat >expect <<-\EOF + EDITOR=: + FAKE_COMMIT_AMEND= + FAKE_COMMIT_MESSAGE= + FAKE_LINES= + GIT_EDITOR= + GIT_SEQUENCE_EDITOR= + core.editor= + sequence.editor= + EOF + test_cmp expect actual +} diff --git a/t/lib-submodule-update.sh b/t/lib-submodule-update.sh index 0163917..1dd17fc 100755 --- a/t/lib-submodule-update.sh +++ b/t/lib-submodule-update.sh @@ -139,7 +139,7 @@ create_lib_submodule_repo () { git revert HEAD && git checkout -b invalid_sub1 add_sub1 && - git update-index --cacheinfo 160000 0123456789012345678901234567890123456789 sub1 && + git update-index --cacheinfo 160000 $(test_oid numeric) sub1 && git commit -m "Invalid sub1 commit" && git checkout -b valid_sub1 && git revert HEAD && @@ -196,6 +196,7 @@ test_git_directory_exists() { # the submodule repo if it doesn't exist and configures the most problematic # settings for diff.ignoreSubmodules. prolog () { + test_oid_init && (test -d submodule_update_repo || create_lib_submodule_repo) && test_config_global diff.ignoreSubmodules all && test_config diff.ignoreSubmodules all @@ -235,7 +236,7 @@ reset_work_tree_to_interested () { then mkdir -p submodule_update/.git/modules/sub1/modules && cp -r submodule_update_repo/.git/modules/sub1/modules/sub2 submodule_update/.git/modules/sub1/modules/sub2 - GIT_WORK_TREE=. git -C submodule_update/.git/modules/sub1/modules/sub2 config --unset core.worktree + # core.worktree is unset for sub2 as it is not checked out fi && # indicate we are interested in the submodule: git -C submodule_update config submodule.sub1.url "bogus" && @@ -709,7 +710,8 @@ test_submodule_recursing_with_args_common() { git branch -t remove_sub1 origin/remove_sub1 && $command remove_sub1 && test_superproject_content origin/remove_sub1 && - ! test -e sub1 + ! test -e sub1 && + test_must_fail git config -f .git/modules/sub1/config core.worktree ) ' # ... absorbing a .git directory along the way. diff --git a/t/oid-info/hash-info b/t/oid-info/hash-info index ccdbfdf..d0736dd 100644 --- a/t/oid-info/hash-info +++ b/t/oid-info/hash-info @@ -6,3 +6,12 @@ hexsz sha256:64 zero sha1:0000000000000000000000000000000000000000 zero sha256:0000000000000000000000000000000000000000000000000000000000000000 + +algo sha1:sha1 +algo sha256:sha256 + +empty_blob sha1:e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +empty_blob sha256:473a0f4c3be8a93681a267e3b1e9a7dcda1185436fe141f7749120a303721813 + +empty_tree sha1:4b825dc642cb6eb9a060e54bf8d69288fbee4904 +empty_tree sha256:6ef19b41225c5369f1c104d45d8d85efa9b057b53b14b4b9b939dd74decc5321 diff --git a/t/perf/README b/t/perf/README index be12090..c7b70e2 100644 --- a/t/perf/README +++ b/t/perf/README @@ -45,7 +45,7 @@ call the aggregation script to summarize the results: $ ./p0001-rev-list.sh [...] - $ GIT_BUILD_DIR=/path/to/other/git ./p0001-rev-list.sh + $ ./run /path/to/other/git -- ./p0001-rev-list.sh [...] $ ./aggregate.perl . /path/to/other/git ./p0001-rev-list.sh diff --git a/t/perf/aggregate.perl b/t/perf/aggregate.perl index 494907a..14e4cda 100755 --- a/t/perf/aggregate.perl +++ b/t/perf/aggregate.perl @@ -3,9 +3,8 @@ use lib '../../perl/build/lib'; use strict; use warnings; -use JSON; use Getopt::Long; -use Git; +use Cwd qw(realpath); sub get_times { my $name = shift; @@ -85,6 +84,11 @@ sub format_size { return $out; } +sub sane_backticks { + open(my $fh, '-|', @_); + return <$fh>; +} + my (@dirs, %dirnames, %dirabbrevs, %prefixes, @tests, $codespeed, $sortby, $subsection, $reponame); @@ -99,18 +103,22 @@ usage() unless $rc; while (scalar @ARGV) { my $arg = $ARGV[0]; my $dir; + my $prefix = ''; last if -f $arg or $arg eq "--"; if (! -d $arg) { - my $rev = Git::command_oneline(qw(rev-parse --verify), $arg); + my $rev = sane_backticks(qw(git rev-parse --verify), $arg); + chomp $rev; $dir = "build/".$rev; + } elsif ($arg eq '.') { + $dir = '.'; } else { - $arg =~ s{/*$}{}; - $dir = $arg; - $dirabbrevs{$dir} = $dir; + $dir = realpath($arg); + $dirnames{$dir} = $dir; + $prefix .= 'bindir'; } push @dirs, $dir; - $dirnames{$dir} = $arg; - my $prefix = $dir; + $dirnames{$dir} ||= $arg; + $prefix .= $dir; $prefix =~ tr/^a-zA-Z0-9/_/c; $prefixes{$dir} = $prefix . '.'; shift @ARGV; @@ -216,13 +224,7 @@ sub print_default_results { for my $i (0..$#dirs) { my $d = $dirs[$i]; my $base = "$resultsdir/$prefixes{$d}$t"; - $times{$prefixes{$d}.$t} = []; - foreach my $type (qw(times size)) { - if (-e "$base.$type") { - $times{$prefixes{$d}.$t} = [get_times("$base.$type")]; - last; - } - } + $times{$prefixes{$d}.$t} = [get_times("$base.result")]; my ($r,$u,$s) = @{$times{$prefixes{$d}.$t}}; my $w = length format_times($r,$u,$s,$firstr); $colwidth[$i] = $w if $w > $colwidth[$i]; @@ -264,7 +266,7 @@ sub print_sorted_results { my ($prevr, $prevu, $prevs, $prevrev); for my $i (0..$#dirs) { my $d = $dirs[$i]; - my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + my ($r, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.result"); if ($i > 0 and defined $r and defined $prevr and $prevr > 0) { my $percent = 100.0 * ($r - $prevr) / $prevr; push @evolutions, { "percent" => $percent, @@ -312,9 +314,6 @@ sub print_codespeed_results { $environment = $reponame; } elsif (exists $ENV{GIT_PERF_REPO_NAME} and $ENV{GIT_PERF_REPO_NAME} ne "") { $environment = $ENV{GIT_PERF_REPO_NAME}; - } elsif (exists $ENV{GIT_TEST_INSTALLED} and $ENV{GIT_TEST_INSTALLED} ne "") { - $environment = $ENV{GIT_TEST_INSTALLED}; - $environment =~ s|/bin-wrappers$||; } else { $environment = `uname -r`; chomp $environment; @@ -327,7 +326,7 @@ sub print_codespeed_results { my $commitid = $prefixes{$d}; $commitid =~ s/^build_//; $commitid =~ s/\.$//; - my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.times"); + my ($result_value, $u, $s) = get_times("$resultsdir/$prefixes{$d}$t.result"); my %vals = ( "commitid" => $commitid, @@ -342,7 +341,8 @@ sub print_codespeed_results { } } - print to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; + require JSON; + print JSON::to_json(\@data, {utf8 => 1, pretty => 1, canonical => 1}), "\n"; } binmode STDOUT, ":utf8" or die "PANIC on binmode: $!"; diff --git a/t/perf/bisect_regression b/t/perf/bisect_regression index a94d995..ce47e16 100755 --- a/t/perf/bisect_regression +++ b/t/perf/bisect_regression @@ -51,7 +51,7 @@ oldtime=$(echo "$oldtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') newtime=$(echo "$newtime" | sed -e 's/^\([0-9]\+\.[0-9]\+\).*$/\1/') test $(echo "$newtime" "$oldtime" | awk '{ print ($1 > $2) }') = 1 || - die "New time '$newtime' shoud be greater than old time '$oldtime'" + die "New time '$newtime' should be greater than old time '$oldtime'" tmpdir=$(mktemp -d -t bisect_regression_XXXXXX) || die "Failed to create temp directory" echo "$oldtime" >"$tmpdir/oldtime" || die "Failed to write to '$tmpdir/oldtime'" diff --git a/t/perf/p0001-rev-list.sh b/t/perf/p0001-rev-list.sh index ebf1724..3042a85 100755 --- a/t/perf/p0001-rev-list.sh +++ b/t/perf/p0001-rev-list.sh @@ -14,6 +14,24 @@ test_perf 'rev-list --all --objects' ' git rev-list --all --objects >/dev/null ' +test_perf 'rev-list --parents' ' + git rev-list --parents HEAD >/dev/null +' + +test_expect_success 'create dummy file' ' + echo unlikely-to-already-be-there >dummy && + git add dummy && + git commit -m dummy +' + +test_perf 'rev-list -- dummy' ' + git rev-list HEAD -- dummy +' + +test_perf 'rev-list --parents -- dummy' ' + git rev-list --parents HEAD -- dummy +' + test_expect_success 'create new unreferenced commit' ' commit=$(git commit-tree HEAD^{tree} -p HEAD) && test_export commit diff --git a/t/perf/p5302-pack-index.sh b/t/perf/p5302-pack-index.sh index 99bdb16..a9b3e11 100755 --- a/t/perf/p5302-pack-index.sh +++ b/t/perf/p5302-pack-index.sh @@ -13,35 +13,40 @@ test_expect_success 'repack' ' export PACK ' -test_expect_success 'create target repositories' ' - for repo in t1 t2 t3 t4 t5 t6 - do - git init --bare $repo - done -' - test_perf 'index-pack 0 threads' ' - GIT_DIR=t1 git index-pack --threads=1 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=1 --stdin < $PACK ' test_perf 'index-pack 1 thread ' ' - GIT_DIR=t2 GIT_FORCE_THREADS=1 git index-pack --threads=1 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git GIT_FORCE_THREADS=1 git index-pack --threads=1 --stdin < $PACK ' test_perf 'index-pack 2 threads' ' - GIT_DIR=t3 git index-pack --threads=2 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=2 --stdin < $PACK ' test_perf 'index-pack 4 threads' ' - GIT_DIR=t4 git index-pack --threads=4 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=4 --stdin < $PACK ' test_perf 'index-pack 8 threads' ' - GIT_DIR=t5 git index-pack --threads=8 --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --threads=8 --stdin < $PACK ' test_perf 'index-pack default number of threads' ' - GIT_DIR=t6 git index-pack --stdin < $PACK + rm -rf repo.git && + git init --bare repo.git && + GIT_DIR=repo.git git index-pack --stdin < $PACK ' test_done diff --git a/t/perf/p5303-many-packs.sh b/t/perf/p5303-many-packs.sh index 3779851..7ee7916 100755 --- a/t/perf/p5303-many-packs.sh +++ b/t/perf/p5303-many-packs.sh @@ -77,6 +77,7 @@ do # actual pack generation, without smudging the on-disk setup # between trials. test_perf "repack ($nr_packs)" ' + GIT_TEST_FULL_IN_PACK_ARRAY=1 \ git pack-objects --keep-true-parents \ --honor-pack-keep --non-empty --all \ --reflog --indexed-objects --delta-base-offset \ @@ -84,4 +85,22 @@ do ' done +# Measure pack loading with 10,000 packs. +test_expect_success 'generate lots of packs' ' + for i in $(test_seq 10000); do + echo "blob" + echo "data <<EOF" + echo "blob $i" + echo "EOF" + echo "checkpoint" + done | + git -c fastimport.unpackLimit=0 fast-import +' + +# The purpose of this test is to evaluate load time for a large number +# of packs while doing as little other work as possible. +test_perf "load 10,000 packs" ' + git rev-parse --verify "HEAD^{commit}" +' + test_done diff --git a/t/perf/p5304-prune.sh b/t/perf/p5304-prune.sh new file mode 100755 index 0000000..83baedb --- /dev/null +++ b/t/perf/p5304-prune.sh @@ -0,0 +1,35 @@ +#!/bin/sh + +test_description='performance tests of prune' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'remove reachable loose objects' ' + git repack -ad +' + +test_expect_success 'remove unreachable loose objects' ' + git prune +' + +test_expect_success 'confirm there are no loose objects' ' + git count-objects | grep ^0 +' + +test_perf 'prune with no objects' ' + git prune +' + +test_expect_success 'repack with bitmaps' ' + git repack -adb +' + +# We have to create the object in each trial run, since otherwise +# runs after the first see no object and just skip the traversal entirely! +test_perf 'prune with bitmaps' ' + echo "probably not present in repo" | git hash-object -w --stdin && + git prune +' + +test_done diff --git a/t/perf/p5310-pack-bitmaps.sh b/t/perf/p5310-pack-bitmaps.sh index bb91dbb..7743f4f 100755 --- a/t/perf/p5310-pack-bitmaps.sh +++ b/t/perf/p5310-pack-bitmaps.sh @@ -12,8 +12,7 @@ test_perf_large_repo # We intentionally use the deprecated pack.writebitmaps # config so that we can test against older versions of git. test_expect_success 'setup bitmap config' ' - git config pack.writebitmaps true && - git config pack.writebitmaphashcache true + git config pack.writebitmaps true ' test_perf 'repack to disk' ' @@ -40,6 +39,28 @@ test_perf 'pack to file (bitmap)' ' git pack-objects --use-bitmap-index --all pack1b </dev/null >/dev/null ' +test_perf 'rev-list (commits)' ' + git rev-list --all --use-bitmap-index >/dev/null +' + +test_perf 'rev-list (objects)' ' + git rev-list --all --use-bitmap-index --objects >/dev/null +' + +test_perf 'rev-list count with blob:none' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=blob:none >/dev/null +' + +test_perf 'rev-list count with blob:limit=1k' ' + git rev-list --use-bitmap-index --count --objects --all \ + --filter=blob:limit=1k >/dev/null +' + +test_perf 'simulated partial clone' ' + git pack-objects --stdout --all --filter=blob:none </dev/null >/dev/null +' + test_expect_success 'create partial bitmap state' ' # pick a commit to represent the repo tip in the past cutoff=$(git rev-list HEAD~100 -1) && diff --git a/t/perf/p5311-pack-bitmaps-fetch.sh b/t/perf/p5311-pack-bitmaps-fetch.sh index b045759..47c3fd7 100755 --- a/t/perf/p5311-pack-bitmaps-fetch.sh +++ b/t/perf/p5311-pack-bitmaps-fetch.sh @@ -7,7 +7,6 @@ test_perf_default_repo test_expect_success 'create bitmapped server repo' ' git config pack.writebitmaps true && - git config pack.writebitmaphashcache true && git repack -ad ' diff --git a/t/perf/p5600-partial-clone.sh b/t/perf/p5600-partial-clone.sh new file mode 100755 index 0000000..3e04bd2 --- /dev/null +++ b/t/perf/p5600-partial-clone.sh @@ -0,0 +1,26 @@ +#!/bin/sh + +test_description='performance of partial clones' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'enable server-side config' ' + git config uploadpack.allowFilter true && + git config uploadpack.allowAnySHA1InWant true +' + +test_perf 'clone without blobs' ' + rm -rf bare.git && + git clone --no-local --bare --filter=blob:none . bare.git +' + +test_perf 'checkout of result' ' + rm -rf worktree && + mkdir -p worktree/.git && + tar -C bare.git -cf - . | tar -C worktree/.git -xf - && + git -C worktree config core.bare false && + git -C worktree checkout -f +' + +test_done diff --git a/t/perf/p5601-clone-reference.sh b/t/perf/p5601-clone-reference.sh new file mode 100755 index 0000000..68fed66 --- /dev/null +++ b/t/perf/p5601-clone-reference.sh @@ -0,0 +1,27 @@ +#!/bin/sh + +test_description='speed of clone --reference' +. ./perf-lib.sh + +test_perf_default_repo + +test_expect_success 'create shareable repository' ' + git clone --bare . shared.git +' + +test_expect_success 'advance base repository' ' + # Do not use test_commit here; its test_tick will + # use some ancient hard-coded date. The resulting clock + # skew will cause pack-objects to traverse in a very + # sub-optimal order, skewing the results. + echo content >new-file-that-does-not-exist && + git add new-file-that-does-not-exist && + git commit -m "new commit" +' + +test_perf 'clone --reference' ' + rm -rf dst.git && + git clone --no-local --bare --reference shared.git . dst.git +' + +test_done diff --git a/t/perf/perf-lib.sh b/t/perf/perf-lib.sh index 2e33ab3..13e3893 100644 --- a/t/perf/perf-lib.sh +++ b/t/perf/perf-lib.sh @@ -17,37 +17,27 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see http://www.gnu.org/licenses/ . -# do the --tee work early; it otherwise confuses our careful -# GIT_BUILD_DIR mangling -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*) - mkdir -p test-results - BASE=test-results/$(basename "$0" .sh) - (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; - echo $? > $BASE.exit) | tee $BASE.out - test "$(cat $BASE.exit)" = 0 - exit - ;; -esac - +# These variables must be set before the inclusion of test-lib.sh below, +# because it will change our working directory. TEST_DIRECTORY=$(pwd)/.. TEST_OUTPUT_DIRECTORY=$(pwd) -if test -z "$GIT_TEST_INSTALLED"; then - perf_results_prefix= -else - perf_results_prefix=$(printf "%s" "${GIT_TEST_INSTALLED%/bin-wrappers}" | tr -c "[a-zA-Z0-9]" "[_*]")"." - # make the tested dir absolute - GIT_TEST_INSTALLED=$(cd "$GIT_TEST_INSTALLED" && pwd) -fi TEST_NO_CREATE_REPO=t TEST_NO_MALLOC_CHECK=t . ../test-lib.sh +if test -n "$GIT_TEST_INSTALLED" -a -z "$PERF_SET_GIT_TEST_INSTALLED" +then + error "Do not use GIT_TEST_INSTALLED with the perf tests. + +Instead use: + + ./run <path-to-git> -- <tests> + +See t/perf/README for details." +fi + # Variables from test-lib that are normally internal to the tests; we # need to export them for test_perf subshells export TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR GIT_TEST_CMP @@ -191,7 +181,7 @@ test_wrapper_ () { base=$(basename "$0" .sh) echo "$test_count" >>"$perf_results_dir"/$base.subtests echo "$1" >"$perf_results_dir"/$base.$test_count.descr - base="$perf_results_dir"/"$perf_results_prefix$(basename "$0" .sh)"."$test_count" + base="$perf_results_dir"/"$PERF_RESULTS_PREFIX$(basename "$0" .sh)"."$test_count" "$test_wrapper_func_" "$@" fi @@ -224,7 +214,7 @@ test_perf_ () { else test_ok_ "$1" fi - "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".times + "$TEST_DIRECTORY"/perf/min_time.perl test_time.* >"$base".result } test_perf () { @@ -233,7 +223,7 @@ test_perf () { test_size_ () { say >&3 "running: $2" - if test_eval_ "$2" 3>"$base".size; then + if test_eval_ "$2" 3>"$base".result; then test_ok_ "$1" else test_failure_ "$@" @@ -70,6 +70,24 @@ build_git_rev () { ) || die "failed to build revision '$mydir'" } +set_git_test_installed () { + mydir=$1 + + mydir_abs=$(cd $mydir && pwd) + mydir_abs_wrappers="$mydir_abs_wrappers/bin-wrappers" + if test -d "$mydir_abs_wrappers" + then + GIT_TEST_INSTALLED=$mydir_abs_wrappers + else + # Older versions of git lacked bin-wrappers; + # fallback to the files in the root. + GIT_TEST_INSTALLED=$mydir_abs + fi + export GIT_TEST_INSTALLED + PERF_SET_GIT_TEST_INSTALLED=true + export PERF_SET_GIT_TEST_INSTALLED +} + run_dirs_helper () { mydir=${1%/} shift @@ -79,7 +97,16 @@ run_dirs_helper () { if test $# -gt 0 -a "$1" = --; then shift fi - if [ ! -d "$mydir" ]; then + + PERF_RESULTS_PREFIX= + if test "$mydir" = "." + then + unset GIT_TEST_INSTALLED + elif test -d "$mydir" + then + PERF_RESULTS_PREFIX=bindir$(cd $mydir && printf "%s" "$(pwd)" | tr -c "[a-zA-Z0-9]" "_"). + set_git_test_installed "$mydir" + else rev=$(git rev-parse --verify "$mydir" 2>/dev/null) || die "'$mydir' is neither a directory nor a valid revision" if [ ! -d build/$rev ]; then @@ -87,16 +114,12 @@ run_dirs_helper () { fi build_git_rev $rev "$mydir" mydir=build/$rev + + PERF_RESULTS_PREFIX=build_$rev. + set_git_test_installed "$mydir" fi - if test "$mydir" = .; then - unset GIT_TEST_INSTALLED - else - GIT_TEST_INSTALLED="$mydir/bin-wrappers" - # Older versions of git lacked bin-wrappers; fallback to the - # files in the root. - test -d "$GIT_TEST_INSTALLED" || GIT_TEST_INSTALLED=$mydir - export GIT_TEST_INSTALLED - fi + export PERF_RESULTS_PREFIX + run_one_dir "$@" } diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh index b656600..3e440c0 100755 --- a/t/t0000-basic.sh +++ b/t/t0000-basic.sh @@ -20,28 +20,27 @@ modification *should* take notice and update the test vectors here. . ./test-lib.sh -try_local_x () { - local x="local" && - echo "$x" +try_local_xy () { + local x="local" y="alsolocal" && + echo "$x $y" } -# This test is an experiment to check whether any Git users are using -# Shells that don't support the "local" keyword. "local" is not +# Check whether the shell supports the "local" keyword. "local" is not # POSIX-standard, but it is very widely supported by POSIX-compliant -# shells, and if it doesn't cause problems for people, we would like -# to be able to use it in Git code. +# shells, and we rely on it within Git's test framework. # -# For now, this is the only test that requires "local". If your shell -# fails this test, you can ignore the failure, but please report the -# problem to the Git mailing list <git@vger.kernel.org>, as it might -# convince us to continue avoiding the use of "local". +# If your shell fails this test, the results of other tests may be +# unreliable. You may wish to report the problem to the Git mailing +# list <git@vger.kernel.org>, as it could cause us to reconsider +# relying on "local". test_expect_success 'verify that the running shell supports "local"' ' x="notlocal" && - echo "local" >expected1 && - try_local_x >actual1 && + y="alsonotlocal" && + echo "local alsolocal" >expected1 && + try_local_xy >actual1 && test_cmp expected1 actual1 && - echo "notlocal" >expected2 && - echo "$x" >actual2 && + echo "notlocal alsonotlocal" >expected2 && + echo "$x $y" >actual2 && test_cmp expected2 actual2 ' @@ -128,7 +127,7 @@ check_sub_test_lib_test () { check_sub_test_lib_test_err () { name="$1" # stdin is the expected output from the test - # expected error output is in descriptior 3 + # expected error output is in descriptor 3 ( cd "$name" && sed -e 's/^> //' -e 's/Z$//' >expect.out && @@ -156,7 +155,7 @@ test_expect_success 'pretend we have a fully passing test suite' " " test_expect_success 'pretend we have a partially passing test suite' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ partial-pass '2/3 tests passing' <<-\\EOF && test_expect_success 'passing test #1' 'true' test_expect_success 'failing test #2' 'false' @@ -220,7 +219,7 @@ test_expect_success 'pretend we have fixed one of two known breakages (run in su " test_expect_success 'pretend we have a pass, fail, and known breakage' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ mixed-results1 'mixed results #1' <<-\\EOF && test_expect_success 'passing test' 'true' test_expect_success 'failing test' 'false' @@ -239,7 +238,7 @@ test_expect_success 'pretend we have a pass, fail, and known breakage' " " test_expect_success 'pretend we have a mix of all possible results' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ mixed-results2 'mixed results #2' <<-\\EOF && test_expect_success 'passing test' 'true' test_expect_success 'passing test' 'true' @@ -275,24 +274,24 @@ test_expect_success 'pretend we have a mix of all possible results' " " test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' - test_must_fail run_sub_test_lib_test \ - test-verbose "test verbose" --verbose <<-\EOF && + run_sub_test_lib_test_err \ + t1234-verbose "test verbose" --verbose <<-\EOF && test_expect_success "passing test" true test_expect_success "test with output" "echo foo" test_expect_success "failing test" false test_done EOF - mv test-verbose/out test-verbose/out+ && - grep -v "^Initialized empty" test-verbose/out+ >test-verbose/out && - check_sub_test_lib_test test-verbose <<-\EOF - > expecting success: true + mv t1234-verbose/out t1234-verbose/out+ && + grep -v "^Initialized empty" t1234-verbose/out+ >t1234-verbose/out && + check_sub_test_lib_test t1234-verbose <<-\EOF + > expecting success of 1234.1 '\''passing test'\'': true > ok 1 - passing test > Z - > expecting success: echo foo + > expecting success of 1234.2 '\''test with output'\'': echo foo > foo > ok 2 - test with output > Z - > expecting success: false + > expecting success of 1234.3 '\''failing test'\'': false > not ok 3 - failing test > # false > Z @@ -302,18 +301,18 @@ test_expect_success C_LOCALE_OUTPUT 'test --verbose' ' ' test_expect_success 'test --verbose-only' ' - test_must_fail run_sub_test_lib_test \ - test-verbose-only-2 "test verbose-only=2" \ + run_sub_test_lib_test_err \ + t2345-verbose-only-2 "test verbose-only=2" \ --verbose-only=2 <<-\EOF && test_expect_success "passing test" true test_expect_success "test with output" "echo foo" test_expect_success "failing test" false test_done EOF - check_sub_test_lib_test test-verbose-only-2 <<-\EOF + check_sub_test_lib_test t2345-verbose-only-2 <<-\EOF > ok 1 - passing test > Z - > expecting success: echo foo + > expecting success of 2345.2 '\''test with output'\'': echo foo > foo > ok 2 - test with output > Z @@ -393,6 +392,44 @@ test_expect_success 'GIT_SKIP_TESTS sh pattern' " ) " +test_expect_success 'GIT_SKIP_TESTS entire suite' " + ( + GIT_SKIP_TESTS='git' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-entire-suite \ + 'GIT_SKIP_TESTS entire suite' <<-\\EOF && + for i in 1 2 3 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-entire-suite <<-\\EOF + > 1..0 # SKIP skip all tests in git + EOF + ) +" + +test_expect_success 'GIT_SKIP_TESTS does not skip unmatched suite' " + ( + GIT_SKIP_TESTS='notgit' && export GIT_SKIP_TESTS && + run_sub_test_lib_test git-skip-tests-unmatched-suite \ + 'GIT_SKIP_TESTS does not skip unmatched suite' <<-\\EOF && + for i in 1 2 3 + do + test_expect_success \"passing test #\$i\" 'true' + done + test_done + EOF + check_sub_test_lib_test git-skip-tests-unmatched-suite <<-\\EOF + > ok 1 - passing test #1 + > ok 2 - passing test #2 + > ok 3 - passing test #3 + > # passed all 3 test(s) + > 1..3 + EOF + ) +" + test_expect_success '--run basic' " run_sub_test_lib_test run-basic \ '--run basic' --run='1 3 5' <<-\\EOF && @@ -726,7 +763,7 @@ donthaveit=yes test_expect_success DONTHAVEIT 'unmet prerequisite causes test to be skipped' ' donthaveit=no ' -if test $haveit$donthaveit != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $haveit$donthaveit != yesyes then say "bug in test framework: prerequisite tags do not work reliably" exit 1 @@ -747,7 +784,7 @@ donthaveiteither=yes test_expect_success DONTHAVEIT,HAVEIT 'unmet prerequisites causes test to be skipped' ' donthaveiteither=no ' -if test $haveit$donthaveit$donthaveiteither != yesyesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $haveit$donthaveit$donthaveiteither != yesyesyes then say "bug in test framework: multiple prerequisite tags do not work reliably" exit 1 @@ -763,7 +800,7 @@ test_expect_success !LAZY_TRUE 'missing lazy prereqs skip tests' ' donthavetrue=no ' -if test "$havetrue$donthavetrue" != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a "$havetrue$donthavetrue" != yesyes then say 'bug in test framework: lazy prerequisites do not work' exit 1 @@ -779,7 +816,7 @@ test_expect_success LAZY_FALSE 'missing negative lazy prereqs will skip' ' havefalse=no ' -if test "$nothavefalse$havefalse" != yesyes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a "$nothavefalse$havefalse" != yesyes then say 'bug in test framework: negative lazy prerequisites do not work' exit 1 @@ -790,14 +827,14 @@ test_expect_success 'tests clean up after themselves' ' test_when_finished clean=yes ' -if test $clean != yes +if test -z "$GIT_TEST_FAIL_PREREQS_INTERNAL" -a $clean != yes then say "bug in test framework: basic cleanup command does not work reliably" exit 1 fi test_expect_success 'tests clean up even on failures' " - test_must_fail run_sub_test_lib_test \ + run_sub_test_lib_test_err \ failing-cleanup 'Failing tests with cleanup commands' <<-\\EOF && test_expect_success 'tests clean up even after a failure' ' touch clean-after-failure && @@ -825,6 +862,24 @@ test_expect_success 'tests clean up even on failures' " EOF " +test_expect_success 'test_atexit is run' " + run_sub_test_lib_test_err \ + atexit-cleanup 'Run atexit commands' -i <<-\\EOF && + test_expect_success 'tests clean up even after a failure' ' + > ../../clean-atexit && + test_atexit rm ../../clean-atexit && + > ../../also-clean-atexit && + test_atexit rm ../../also-clean-atexit && + > ../../dont-clean-atexit && + (exit 1) + ' + test_done + EOF + test_path_is_file dont-clean-atexit && + test_path_is_missing clean-atexit && + test_path_is_missing also-clean-atexit +" + test_expect_success 'test_oid setup' ' test_oid_init ' @@ -862,6 +917,40 @@ test_expect_success 'test_oid can look up data for SHA-256' ' test "$hexsz" -eq 64 ' +test_expect_success 'test_bool_env' ' + ( + sane_unset envvar && + + test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar= && + export envvar && + ! test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar=true && + test_bool_env envvar true && + test_bool_env envvar false && + + envvar=false && + ! test_bool_env envvar true && + ! test_bool_env envvar false && + + envvar=invalid && + # When encountering an invalid bool value, test_bool_env + # prints its error message to the original stderr of the + # test script, hence the redirection of fd 7, and aborts + # with "exit 1", hence the subshell. + ! ( test_bool_env envvar true ) 7>err && + grep "error: test_bool_env requires bool values" err && + + envvar=true && + ! ( test_bool_env envvar invalid ) 7>err && + grep "error: test_bool_env requires bool values" err + ) +' + ################################################################ # Basics of the basics diff --git a/t/t0001-init.sh b/t/t0001-init.sh index 42a263c..26f8206 100755 --- a/t/t0001-init.sh +++ b/t/t0001-init.sh @@ -93,6 +93,7 @@ test_expect_success 'No extra GIT_* on alias scripts' ' sed -n \ -e "/^GIT_PREFIX=/d" \ -e "/^GIT_TEXTDOMAINDIR=/d" \ + -e "/^GIT_TRACE2_PARENT/d" \ -e "/^GIT_/s/=.*//p" | sort EOF @@ -174,7 +175,7 @@ test_expect_success 'reinit' ' test_expect_success 'init with --template' ' mkdir template-source && echo content >template-source/file && - git init --template=../template-source template-custom && + git init --template=template-source template-custom && test_cmp template-source/file template-custom/.git/file ' @@ -310,8 +311,8 @@ test_expect_success 'init prefers command line to GIT_DIR' ' test_expect_success 'init with separate gitdir' ' rm -rf newdir && git init --separate-git-dir realgitdir newdir && - echo "gitdir: $(pwd)/realgitdir" >expected && - test_cmp expected newdir/.git && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/realgitdir" "${newdir_git#gitdir: }" && test_path_is_dir realgitdir/refs ' @@ -360,12 +361,9 @@ test_expect_success 're-init on .git file' ' ' test_expect_success 're-init to update git link' ' - ( - cd newdir && - git init --separate-git-dir ../surrealgitdir - ) && - echo "gitdir: $(pwd)/surrealgitdir" >expected && - test_cmp expected newdir/.git && + git -C newdir init --separate-git-dir ../surrealgitdir && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/surrealgitdir" "${newdir_git#gitdir: }" && test_path_is_dir surrealgitdir/refs && test_path_is_missing realgitdir/refs ' @@ -373,12 +371,9 @@ test_expect_success 're-init to update git link' ' test_expect_success 're-init to move gitdir' ' rm -rf newdir realgitdir surrealgitdir && git init newdir && - ( - cd newdir && - git init --separate-git-dir ../realgitdir - ) && - echo "gitdir: $(pwd)/realgitdir" >expected && - test_cmp expected newdir/.git && + git -C newdir init --separate-git-dir ../realgitdir && + newdir_git="$(cat newdir/.git)" && + test_cmp_fspath "$(pwd)/realgitdir" "${newdir_git#gitdir: }" && test_path_is_dir realgitdir/refs ' @@ -453,6 +448,17 @@ test_expect_success 're-init from a linked worktree' ' ) ' +test_expect_success MINGW 'core.hidedotfiles = false' ' + git config --global core.hidedotfiles false && + rm -rf newdir && + mkdir newdir && + ( + sane_unset GIT_DIR GIT_WORK_TREE GIT_CONFIG && + git -C newdir init + ) && + ! is_hidden newdir/.git +' + test_expect_success MINGW 'redirect std handles' ' GIT_REDIRECT_STDOUT=output.txt git rev-parse --git-dir && test .git = "$(cat output.txt)" && @@ -461,8 +467,8 @@ test_expect_success MINGW 'redirect std handles' ' GIT_REDIRECT_STDOUT=output.txt \ GIT_REDIRECT_STDERR="2>&1" \ git rev-parse --git-dir --verify refs/invalid && - printf ".git\nfatal: Needed a single revision\n" >expect && - test_cmp expect output.txt + grep "^\\.git\$" output.txt && + grep "Needed a single revision" output.txt ' test_done diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh index 22499bc..b660593 100755 --- a/t/t0003-attributes.sh +++ b/t/t0003-attributes.sh @@ -5,19 +5,16 @@ test_description=gitattributes . ./test-lib.sh attr_check () { - path="$1" expect="$2" + path="$1" expect="$2" git_opts="$3" && - git $3 check-attr test -- "$path" >actual 2>err && - echo "$path: test: $2" >expect && + git $git_opts check-attr test -- "$path" >actual 2>err && + echo "$path: test: $expect" >expect && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err } attr_check_quote () { - - path="$1" - quoted_path="$2" - expect="$3" + path="$1" quoted_path="$2" expect="$3" && git check-attr test -- "$path" >actual && echo "\"$quoted_path\": test: $expect" >expect && @@ -27,7 +24,7 @@ attr_check_quote () { test_expect_success 'open-quoted pathname' ' echo "\"a test=a" >.gitattributes && - test_must_fail attr_check a a + attr_check a unspecified ' @@ -112,20 +109,20 @@ test_expect_success 'attribute test' ' test_expect_success 'attribute matching is case sensitive when core.ignorecase=0' ' - test_must_fail attr_check F f "-c core.ignorecase=0" && - test_must_fail attr_check a/F f "-c core.ignorecase=0" && - test_must_fail attr_check a/c/F f "-c core.ignorecase=0" && - test_must_fail attr_check a/G a/g "-c core.ignorecase=0" && - test_must_fail attr_check a/B/g a/b/g "-c core.ignorecase=0" && - test_must_fail attr_check a/b/G a/b/g "-c core.ignorecase=0" && - test_must_fail attr_check a/b/H a/b/h "-c core.ignorecase=0" && - test_must_fail attr_check a/b/D/g "a/b/d/*" "-c core.ignorecase=0" && - test_must_fail attr_check oNoFf unset "-c core.ignorecase=0" && - test_must_fail attr_check oFfOn set "-c core.ignorecase=0" && + attr_check F unspecified "-c core.ignorecase=0" && + attr_check a/F unspecified "-c core.ignorecase=0" && + attr_check a/c/F unspecified "-c core.ignorecase=0" && + attr_check a/G unspecified "-c core.ignorecase=0" && + attr_check a/B/g a/g "-c core.ignorecase=0" && + attr_check a/b/G unspecified "-c core.ignorecase=0" && + attr_check a/b/H unspecified "-c core.ignorecase=0" && + attr_check a/b/D/g a/g "-c core.ignorecase=0" && + attr_check oNoFf unspecified "-c core.ignorecase=0" && + attr_check oFfOn unspecified "-c core.ignorecase=0" && attr_check NO unspecified "-c core.ignorecase=0" && - test_must_fail attr_check a/b/D/NO "a/b/d/*" "-c core.ignorecase=0" && + attr_check a/b/D/NO unspecified "-c core.ignorecase=0" && attr_check a/b/d/YES a/b/d/* "-c core.ignorecase=0" && - test_must_fail attr_check a/E/f "A/e/F" "-c core.ignorecase=0" + attr_check a/E/f f "-c core.ignorecase=0" ' @@ -149,8 +146,8 @@ test_expect_success 'attribute matching is case insensitive when core.ignorecase ' test_expect_success CASE_INSENSITIVE_FS 'additional case insensitivity tests' ' - test_must_fail attr_check a/B/D/g "a/b/d/*" "-c core.ignorecase=0" && - test_must_fail attr_check A/B/D/NO "a/b/d/*" "-c core.ignorecase=0" && + attr_check a/B/D/g a/g "-c core.ignorecase=0" && + attr_check A/B/D/NO unspecified "-c core.ignorecase=0" && attr_check A/b/h a/b/h "-c core.ignorecase=1" && attr_check a/B/D/g "a/b/d/*" "-c core.ignorecase=1" && attr_check A/B/D/NO "a/b/d/*" "-c core.ignorecase=1" @@ -244,7 +241,7 @@ EOF git check-attr foo -- "a/b/f" >>actual 2>>err && git check-attr foo -- "a/b/c/f" >>actual 2>>err && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err ' test_expect_success '"**" with no slashes test' ' @@ -265,7 +262,7 @@ EOF git check-attr foo -- "a/b/f" >>actual 2>>err && git check-attr foo -- "a/b/c/f" >>actual 2>>err && test_cmp expect actual && - test_line_count = 0 err + test_must_be_empty err ' test_expect_success 'using --git-dir and --work-tree' ' @@ -322,4 +319,24 @@ test_expect_success 'bare repository: test info/attributes' ' ) ' +test_expect_success 'binary macro expanded by -a' ' + echo "file binary" >.gitattributes && + cat >expect <<-\EOF && + file: binary: set + file: diff: unset + file: merge: unset + file: text: unset + EOF + git check-attr -a file >actual && + test_cmp expect actual +' + + +test_expect_success 'query binary macro directly' ' + echo "file binary" >.gitattributes && + echo file: binary: set >expect && + git check-attr binary file >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0006-date.sh b/t/t0006-date.sh index ffb2975..d9fcc82 100755 --- a/t/t0006-date.sh +++ b/t/t0006-date.sh @@ -4,10 +4,10 @@ test_description='test date parsing and printing' . ./test-lib.sh # arbitrary reference time: 2009-08-30 19:20:00 -TEST_DATE_NOW=1251660000; export TEST_DATE_NOW +GIT_TEST_DATE_NOW=1251660000; export GIT_TEST_DATE_NOW check_relative() { - t=$(($TEST_DATE_NOW - $1)) + t=$(($GIT_TEST_DATE_NOW - $1)) echo "$t -> $2" >expect test_expect_${3:-success} "relative date ($2)" " test-tool date relative $t >actual && @@ -128,4 +128,22 @@ check_approxidate '6AM, June 7, 2009' '2009-06-07 06:00:00' check_approxidate '2008-12-01' '2008-12-01 19:20:00' check_approxidate '2009-12-01' '2009-12-01 19:20:00' +check_date_format_human() { + t=$(($GIT_TEST_DATE_NOW - $1)) + echo "$t -> $2" >expect + test_expect_success "human date $t" ' + test-tool date human $t >actual && + test_i18ncmp expect actual +' +} + +check_date_format_human 18000 "5 hours ago" # 5 hours ago +check_date_format_human 432000 "Tue Aug 25 19:20" # 5 days ago +check_date_format_human 1728000 "Mon Aug 10 19:20" # 3 weeks ago +check_date_format_human 13000000 "Thu Apr 2 08:13" # 5 months ago +check_date_format_human 31449600 "Aug 31 2008" # 12 months ago +check_date_format_human 37500000 "Jun 22 2008" # 1 year, 2 months ago +check_date_format_human 55188000 "Dec 1 2007" # 1 year, 9 months ago +check_date_format_human 630000000 "Sep 13 1989" # 20 years ago + test_done diff --git a/t/t0007-git-var.sh b/t/t0007-git-var.sh index 5868a87..1f600e2 100755 --- a/t/t0007-git-var.sh +++ b/t/t0007-git-var.sh @@ -17,7 +17,7 @@ test_expect_success 'get GIT_COMMITTER_IDENT' ' test_cmp expect actual ' -test_expect_success !AUTOIDENT 'requested identites are strict' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'requested identites are strict' ' ( sane_unset GIT_COMMITTER_NAME && sane_unset GIT_COMMITTER_EMAIL && diff --git a/t/t0008-ignores.sh b/t/t0008-ignores.sh index 1744cee..370a389 100755 --- a/t/t0008-ignores.sh +++ b/t/t0008-ignores.sh @@ -424,9 +424,24 @@ test_expect_success 'local ignore inside a sub-directory with --verbose' ' ) ' -test_expect_success_multi 'nested include' \ - 'a/b/.gitignore:8:!on* a/b/one' ' - test_check_ignore "a/b/one" +test_expect_success 'nested include of negated pattern' ' + expect "" && + test_check_ignore "a/b/one" 1 +' + +test_expect_success 'nested include of negated pattern with -q' ' + expect "" && + test_check_ignore "-q a/b/one" 1 +' + +test_expect_success 'nested include of negated pattern with -v' ' + expect "a/b/.gitignore:8:!on* a/b/one" && + test_check_ignore "-v a/b/one" 0 +' + +test_expect_success 'nested include of negated pattern with -v -n' ' + expect "a/b/.gitignore:8:!on* a/b/one" && + test_check_ignore "-v -n a/b/one" 0 ' ############################################################################ @@ -460,7 +475,6 @@ test_expect_success 'cd to ignored sub-directory' ' expect_from_stdin <<-\EOF && foo twoooo - ../one seven ../../one EOF @@ -543,7 +557,6 @@ test_expect_success 'global ignore' ' globalthree a/globalthree a/per-repo - globaltwo EOF test_check_ignore "globalone per-repo globalthree a/globalthree a/per-repo not-ignored globaltwo" ' @@ -586,17 +599,7 @@ EOF cat <<-\EOF >expected-default one a/one - a/b/on - a/b/one - a/b/one one - a/b/one two - "a/b/one\"three" - a/b/two a/b/twooo - globaltwo - a/globaltwo - a/b/globaltwo - b/globaltwo EOF cat <<-EOF >expected-verbose .gitignore:1:one one @@ -696,8 +699,12 @@ cat <<-EOF >expected-all $global_excludes:2:!globaltwo ../b/globaltwo :: c/not-ignored EOF +cat <<-EOF >expected-default +../one +one +b/twooo +EOF grep -v '^:: ' expected-all >expected-verbose -sed -e 's/.* //' expected-verbose >expected-default broken_c_unquote stdin >stdin0 diff --git a/t/t0011-hashmap.sh b/t/t0011-hashmap.sh index 3f1f505..5343ffd 100755 --- a/t/t0011-hashmap.sh +++ b/t/t0011-hashmap.sh @@ -9,15 +9,6 @@ test_hashmap() { test_cmp expect actual } -test_expect_success 'hash functions' ' - -test_hashmap "hash key1" "2215982743 2215982743 116372151 116372151" && -test_hashmap "hash key2" "2215982740 2215982740 116372148 116372148" && -test_hashmap "hash fooBarFrotz" "1383912807 1383912807 3189766727 3189766727" && -test_hashmap "hash foobarfrotz" "2862305959 2862305959 3189766727 3189766727" - -' - test_expect_success 'put' ' test_hashmap "put key1 value1 @@ -179,31 +170,45 @@ NULL ' test_expect_success 'iterate' ' - -test_hashmap "put key1 value1 -put key2 value2 -put fooBarFrotz value3 -iterate" "NULL -NULL -NULL -key2 value2 -key1 value1 -fooBarFrotz value3" - + test-tool hashmap >actual.raw <<-\EOF && + put key1 value1 + put key2 value2 + put fooBarFrotz value3 + iterate + EOF + + cat >expect <<-\EOF && + NULL + NULL + NULL + fooBarFrotz value3 + key1 value1 + key2 value2 + EOF + + sort <actual.raw >actual && + test_cmp expect actual ' test_expect_success 'iterate (case insensitive)' ' - -test_hashmap "put key1 value1 -put key2 value2 -put fooBarFrotz value3 -iterate" "NULL -NULL -NULL -fooBarFrotz value3 -key2 value2 -key1 value1" ignorecase - + test-tool hashmap ignorecase >actual.raw <<-\EOF && + put key1 value1 + put key2 value2 + put fooBarFrotz value3 + iterate + EOF + + cat >expect <<-\EOF && + NULL + NULL + NULL + fooBarFrotz value3 + key1 value1 + key2 value2 + EOF + + sort <actual.raw >actual && + test_cmp expect actual ' test_expect_success 'grow / shrink' ' diff --git a/t/t0014-alias.sh b/t/t0014-alias.sh index a070e64..8d3d914 100755 --- a/t/t0014-alias.sh +++ b/t/t0014-alias.sh @@ -37,4 +37,11 @@ test_expect_success 'looping aliases - internal execution' ' # test_i18ngrep "^fatal: alias loop detected: expansion of" output #' +test_expect_success 'run-command formats empty args properly' ' + test_must_fail env GIT_TRACE=1 git frotz a "" b " " c 2>actual.raw && + sed -ne "/run_command:/s/.*trace: run_command: //p" actual.raw >actual && + echo "git-frotz a '\'''\'' b '\'' '\'' c" >expect && + test_cmp expect actual +' + test_done diff --git a/t/t0015-hash.sh b/t/t0015-hash.sh new file mode 100755 index 0000000..291e906 --- /dev/null +++ b/t/t0015-hash.sh @@ -0,0 +1,55 @@ +#!/bin/sh + +test_description='test basic hash implementation' +. ./test-lib.sh + + +test_expect_success 'test basic SHA-1 hash values' ' + test-tool sha1 </dev/null >actual && + grep da39a3ee5e6b4b0d3255bfef95601890afd80709 actual && + printf "a" | test-tool sha1 >actual && + grep 86f7e437faa5a7fce15d1ddcb9eaeaea377667b8 actual && + printf "abc" | test-tool sha1 >actual && + grep a9993e364706816aba3e25717850c26c9cd0d89d actual && + printf "message digest" | test-tool sha1 >actual && + grep c12252ceda8be8994d5fa0290a47231c1d16aae3 actual && + printf "abcdefghijklmnopqrstuvwxyz" | test-tool sha1 >actual && + grep 32d10c7b8cf96570ca04ce37f2a19d84240d3a89 actual && + perl -e "$| = 1; print q{aaaaaaaaaa} for 1..100000;" | \ + test-tool sha1 >actual && + grep 34aa973cd4c4daa4f61eeb2bdbad27316534016f actual && + printf "blob 0\0" | test-tool sha1 >actual && + grep e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 actual && + printf "blob 3\0abc" | test-tool sha1 >actual && + grep f2ba8f84ab5c1bce84a7b441cb1959cfc7093b7f actual && + printf "tree 0\0" | test-tool sha1 >actual && + grep 4b825dc642cb6eb9a060e54bf8d69288fbee4904 actual +' + +test_expect_success 'test basic SHA-256 hash values' ' + test-tool sha256 </dev/null >actual && + grep e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 actual && + printf "a" | test-tool sha256 >actual && + grep ca978112ca1bbdcafac231b39a23dc4da786eff8147c4e72b9807785afee48bb actual && + printf "abc" | test-tool sha256 >actual && + grep ba7816bf8f01cfea414140de5dae2223b00361a396177a9cb410ff61f20015ad actual && + printf "message digest" | test-tool sha256 >actual && + grep f7846f55cf23e14eebeab5b4e1550cad5b509e3348fbc4efa3a1413d393cb650 actual && + printf "abcdefghijklmnopqrstuvwxyz" | test-tool sha256 >actual && + grep 71c480df93d6ae2f1efad1447c66c9525e316218cf51fc8d9ed832f2daf18b73 actual && + # Try to exercise the chunking code by turning autoflush on. + perl -e "$| = 1; print q{aaaaaaaaaa} for 1..100000;" | \ + test-tool sha256 >actual && + grep cdc76e5c9914fb9281a1c7e284d73e67f1809a48a497200e046d39ccc7112cd0 actual && + perl -e "$| = 1; print q{abcdefghijklmnopqrstuvwxyz} for 1..100000;" | \ + test-tool sha256 >actual && + grep e406ba321ca712ad35a698bf0af8d61fc4dc40eca6bdcea4697962724ccbde35 actual && + printf "blob 0\0" | test-tool sha256 >actual && + grep 473a0f4c3be8a93681a267e3b1e9a7dcda1185436fe141f7749120a303721813 actual && + printf "blob 3\0abc" | test-tool sha256 >actual && + grep c1cf6e465077930e88dc5136641d402f72a229ddd996f627d60e9639eaba35a6 actual && + printf "tree 0\0" | test-tool sha256 >actual && + grep 6ef19b41225c5369f1c104d45d8d85efa9b057b53b14b4b9b939dd74decc5321 actual +' + +test_done diff --git a/t/t0016-oidmap.sh b/t/t0016-oidmap.sh new file mode 100755 index 0000000..31f8276 --- /dev/null +++ b/t/t0016-oidmap.sh @@ -0,0 +1,110 @@ +#!/bin/sh + +test_description='test oidmap' +. ./test-lib.sh + +# This purposefully is very similar to t0011-hashmap.sh + +test_oidmap () { + echo "$1" | test-tool oidmap $3 >actual && + echo "$2" >expect && + test_cmp expect actual +} + + +test_expect_success 'setup' ' + + test_commit one && + test_commit two && + test_commit three && + test_commit four + +' + +test_expect_success 'put' ' + +test_oidmap "put one 1 +put two 2 +put invalidOid 4 +put three 3" "NULL +NULL +Unknown oid: invalidOid +NULL" + +' + +test_expect_success 'replace' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +put invalidOid 4 +put two deux +put one un" "NULL +NULL +NULL +Unknown oid: invalidOid +2 +1" + +' + +test_expect_success 'get' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +get two +get four +get invalidOid +get one" "NULL +NULL +NULL +2 +NULL +Unknown oid: invalidOid +1" + +' + +test_expect_success 'remove' ' + +test_oidmap "put one 1 +put two 2 +put three 3 +remove one +remove two +remove invalidOid +remove four" "NULL +NULL +NULL +1 +2 +Unknown oid: invalidOid +NULL" + +' + +test_expect_success 'iterate' ' + test-tool oidmap >actual.raw <<-\EOF && + put one 1 + put two 2 + put three 3 + iterate + EOF + + # sort "expect" too so we do not rely on the order of particular oids + sort >expect <<-EOF && + NULL + NULL + NULL + $(git rev-parse one) 1 + $(git rev-parse two) 2 + $(git rev-parse three) 3 + EOF + + sort <actual.raw >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t0017-env-helper.sh b/t/t0017-env-helper.sh new file mode 100755 index 0000000..c1ecf6a --- /dev/null +++ b/t/t0017-env-helper.sh @@ -0,0 +1,99 @@ +#!/bin/sh + +test_description='test env--helper' + +. ./test-lib.sh + + +test_expect_success 'env--helper usage' ' + test_must_fail git env--helper && + test_must_fail git env--helper --type=bool && + test_must_fail git env--helper --type=ulong && + test_must_fail git env--helper --type=bool && + test_must_fail git env--helper --type=bool --default && + test_must_fail git env--helper --type=bool --default= && + test_must_fail git env--helper --defaultxyz +' + +test_expect_success 'env--helper bad default values' ' + test_must_fail git env--helper --type=bool --default=1xyz MISSING && + test_must_fail git env--helper --type=ulong --default=1xyz MISSING +' + +test_expect_success 'env--helper --type=bool' ' + # Test various --default bool values + echo true >expected && + git env--helper --type=bool --default=1 MISSING >actual && + test_cmp expected actual && + git env--helper --type=bool --default=yes MISSING >actual && + test_cmp expected actual && + git env--helper --type=bool --default=true MISSING >actual && + test_cmp expected actual && + echo false >expected && + test_must_fail git env--helper --type=bool --default=0 MISSING >actual && + test_cmp expected actual && + test_must_fail git env--helper --type=bool --default=no MISSING >actual && + test_cmp expected actual && + test_must_fail git env--helper --type=bool --default=false MISSING >actual && + test_cmp expected actual && + + # No output with --exit-code + git env--helper --type=bool --default=true --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + test_must_fail git env--helper --type=bool --default=false --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + # Existing variable + EXISTS=true git env--helper --type=bool --default=false --exit-code EXISTS >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + test_must_fail \ + env EXISTS=false \ + git env--helper --type=bool --default=true --exit-code EXISTS >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err +' + +test_expect_success 'env--helper --type=ulong' ' + echo 1234567890 >expected && + git env--helper --type=ulong --default=1234567890 MISSING >actual.out 2>actual.err && + test_cmp expected actual.out && + test_must_be_empty actual.err && + + echo 0 >expected && + test_must_fail git env--helper --type=ulong --default=0 MISSING >actual && + test_cmp expected actual && + + git env--helper --type=ulong --default=1234567890 --exit-code MISSING >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + EXISTS=1234567890 git env--helper --type=ulong --default=0 EXISTS --exit-code >actual.out 2>actual.err && + test_must_be_empty actual.out && + test_must_be_empty actual.err && + + echo 1234567890 >expected && + EXISTS=1234567890 git env--helper --type=ulong --default=0 EXISTS >actual.out 2>actual.err && + test_cmp expected actual.out && + test_must_be_empty actual.err +' + +test_expect_success 'env--helper reads config thanks to trace2' ' + mkdir home && + git config -f home/.gitconfig include.path cycle && + git config -f home/cycle include.path .gitconfig && + + test_must_fail \ + env HOME="$(pwd)/home" GIT_TEST_GETTEXT_POISON=false \ + git config -l 2>err && + grep "exceeded maximum include depth" err && + + test_must_fail \ + env HOME="$(pwd)/home" GIT_TEST_GETTEXT_POISON=true \ + git -C cycle env--helper --type=bool --default=0 --exit-code GIT_TEST_GETTEXT_POISON 2>err && + grep "# GETTEXT POISON #" err +' + +test_done diff --git a/t/t0020-crlf.sh b/t/t0020-crlf.sh index 854da0a..b63ba62 100755 --- a/t/t0020-crlf.sh +++ b/t/t0020-crlf.sh @@ -159,8 +159,8 @@ test_expect_success 'checkout with autocrlf=input' ' rm -f tmp one dir/two three && git config core.autocrlf input && git read-tree --reset -u HEAD && - test_must_fail has_cr one && - test_must_fail has_cr dir/two && + ! has_cr one && + ! has_cr dir/two && git update-index -- one dir/two && test "$one" = $(git hash-object --stdin <one) && test "$two" = $(git hash-object --stdin <dir/two) && @@ -237,9 +237,9 @@ test_expect_success '.gitattributes says two is binary' ' git config core.autocrlf true && git read-tree --reset -u HEAD && - test_must_fail has_cr dir/two && + ! has_cr dir/two && verbose has_cr one && - test_must_fail has_cr three + ! has_cr three ' test_expect_success '.gitattributes says two is input' ' @@ -248,7 +248,7 @@ test_expect_success '.gitattributes says two is input' ' echo "two crlf=input" >.gitattributes && git read-tree --reset -u HEAD && - test_must_fail has_cr dir/two + ! has_cr dir/two ' test_expect_success '.gitattributes says two and three are text' ' @@ -270,7 +270,7 @@ test_expect_success 'in-tree .gitattributes (1)' ' rm -rf tmp one dir .gitattributes patch.file three && git read-tree --reset -u HEAD && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -280,7 +280,7 @@ test_expect_success 'in-tree .gitattributes (2)' ' git read-tree --reset HEAD && git checkout-index -f -q -u -a && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -291,7 +291,7 @@ test_expect_success 'in-tree .gitattributes (3)' ' git checkout-index -u .gitattributes && git checkout-index -u one dir/two three && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' @@ -302,7 +302,7 @@ test_expect_success 'in-tree .gitattributes (4)' ' git checkout-index -u one dir/two three && git checkout-index -u .gitattributes && - test_must_fail has_cr one && + ! has_cr one && verbose has_cr three ' diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index fd5f1ac..dc664da 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -24,7 +24,7 @@ generate_random_characters () { } file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } filter_git () { @@ -35,7 +35,7 @@ filter_git () { # Compare two files and ensure that `clean` and `smudge` respectively are # called at least once if specified in the `expect` file. The actual # invocation count is not relevant because their number can vary. -# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +# c.f. http://lore.kernel.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ test_cmp_count () { expect=$1 actual=$2 @@ -50,7 +50,7 @@ test_cmp_count () { # Compare two files but exclude all `clean` invocations because Git can # call `clean` zero or more times. -# c.f. http://public-inbox.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ +# c.f. http://lore.kernel.org/git/xmqqshv18i8i.fsf@gitster.mtv.corp.google.com/ test_cmp_exclude_clean () { expect=$1 actual=$2 @@ -390,6 +390,9 @@ test_expect_success PERL 'required process filter should filter data' ' EOF test_cmp_exclude_clean expected.log debug.log && + # Make sure that the file appears dirty, so checkout below has to + # run the configured filter. + touch test.r && filter_git checkout --quiet --no-progress empty-branch && cat >expected.log <<-EOF && START @@ -792,7 +795,6 @@ test_expect_success PERL 'missing file in delayed checkout' ' rm -rf repo-cloned && test_must_fail git clone repo repo-cloned 2>git-stderr.log && - cat git-stderr.log && grep "error: .missing-delay\.a. was not filtered properly" git-stderr.log ' diff --git a/t/t0025-crlf-renormalize.sh b/t/t0025-crlf-renormalize.sh index 9d9e02a..e13363a 100755 --- a/t/t0025-crlf-renormalize.sh +++ b/t/t0025-crlf-renormalize.sh @@ -27,4 +27,13 @@ test_expect_success 'renormalize CRLF in repo' ' test_cmp expect actual ' +test_expect_success 'ignore-errors not mistaken for renormalize' ' + git reset --hard && + echo "*.txt text=auto" >.gitattributes && + git ls-files --eol >expect && + git add --ignore-errors "*.txt" && + git ls-files --eol >actual && + test_cmp expect actual +' + test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index beb5927..9fcd56f 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -15,8 +15,10 @@ compare_ws_file () { pfx=$1 exp=$2.expect act=$pfx.actual.$3 - tr '\015\000abcdef0123456789' QN00000000000000000 <"$2" >"$exp" && - tr '\015\000abcdef0123456789' QN00000000000000000 <"$3" >"$act" && + tr '\015\000abcdef0123456789' QN00000000000000000 <"$2" | + sed -e "s/0000*/$ZERO_OID/" >"$exp" && + tr '\015\000abcdef0123456789' QN00000000000000000 <"$3" | + sed -e "s/0000*/$ZERO_OID/" >"$act" && test_cmp "$exp" "$act" && rm "$exp" "$act" } @@ -213,7 +215,7 @@ stats_ascii () { } -# contruct the attr/ returned by git ls-files --eol +# construct the attr/ returned by git ls-files --eol # Take none (=empty), one or two args # convert.c: eol=XX overrides text=auto attr_ascii () { @@ -293,9 +295,9 @@ checkout_files () { do rm crlf_false_attr__$f.txt && if test -z "$ceol"; then - git checkout crlf_false_attr__$f.txt + git checkout -- crlf_false_attr__$f.txt else - git -c core.eol=$ceol checkout crlf_false_attr__$f.txt + git -c core.eol=$ceol checkout -- crlf_false_attr__$f.txt fi done diff --git a/t/t0028-working-tree-encoding.sh b/t/t0028-working-tree-encoding.sh index 7e87b5a..bfc4fb9 100755 --- a/t/t0028-working-tree-encoding.sh +++ b/t/t0028-working-tree-encoding.sh @@ -6,14 +6,41 @@ test_description='working-tree-encoding conversion via gitattributes' GIT_TRACE_WORKING_TREE_ENCODING=1 && export GIT_TRACE_WORKING_TREE_ENCODING +test_lazy_prereq NO_UTF16_BOM ' + test $(printf abc | iconv -f UTF-8 -t UTF-16 | wc -c) = 6 +' + +test_lazy_prereq NO_UTF32_BOM ' + test $(printf abc | iconv -f UTF-8 -t UTF-32 | wc -c) = 12 +' + +write_utf16 () { + if test_have_prereq NO_UTF16_BOM + then + printf '\376\377' + fi && + iconv -f UTF-8 -t UTF-16 +} + +write_utf32 () { + if test_have_prereq NO_UTF32_BOM + then + printf '\0\0\376\377' + fi && + iconv -f UTF-8 -t UTF-32 +} + test_expect_success 'setup test files' ' git config core.eol lf && text="hallo there!\ncan you read me?" && echo "*.utf16 text working-tree-encoding=utf-16" >.gitattributes && + echo "*.utf16lebom text working-tree-encoding=UTF-16LE-BOM" >>.gitattributes && printf "$text" >test.utf8.raw && - printf "$text" | iconv -f UTF-8 -t UTF-16 >test.utf16.raw && - printf "$text" | iconv -f UTF-8 -t UTF-32 >test.utf32.raw && + printf "$text" | write_utf16 >test.utf16.raw && + printf "$text" | write_utf32 >test.utf32.raw && + printf "\377\376" >test.utf16lebom.raw && + printf "$text" | iconv -f UTF-8 -t UTF-16LE >>test.utf16lebom.raw && # Line ending tests printf "one\ntwo\nthree\n" >lf.utf8.raw && @@ -22,17 +49,18 @@ test_expect_success 'setup test files' ' # BOM tests printf "\0a\0b\0c" >nobom.utf16be.raw && printf "a\0b\0c\0" >nobom.utf16le.raw && - printf "\376\777\0a\0b\0c" >bebom.utf16be.raw && - printf "\777\376a\0b\0c\0" >lebom.utf16le.raw && + printf "\376\377\0a\0b\0c" >bebom.utf16be.raw && + printf "\377\376a\0b\0c\0" >lebom.utf16le.raw && printf "\0\0\0a\0\0\0b\0\0\0c" >nobom.utf32be.raw && printf "a\0\0\0b\0\0\0c\0\0\0" >nobom.utf32le.raw && - printf "\0\0\376\777\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && - printf "\777\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && + printf "\0\0\376\377\0\0\0a\0\0\0b\0\0\0c" >bebom.utf32be.raw && + printf "\377\376\0\0a\0\0\0b\0\0\0c\0\0\0" >lebom.utf32le.raw && # Add only UTF-16 file, we will add the UTF-32 file later cp test.utf16.raw test.utf16 && cp test.utf32.raw test.utf32 && - git add .gitattributes test.utf16 && + cp test.utf16lebom.raw test.utf16lebom && + git add .gitattributes test.utf16 test.utf16lebom && git commit -m initial ' @@ -51,6 +79,12 @@ test_expect_success 're-encode to UTF-16 on checkout' ' test_cmp_bin test.utf16.raw test.utf16 ' +test_expect_success 're-encode to UTF-16-LE-BOM on checkout' ' + rm test.utf16lebom && + git checkout test.utf16lebom && + test_cmp_bin test.utf16lebom.raw test.utf16lebom +' + test_expect_success 'check $GIT_DIR/info/attributes support' ' test_when_finished "rm -f test.utf32.git" && test_when_finished "git reset --hard HEAD" && @@ -114,8 +148,8 @@ do test_when_finished "rm -f crlf.utf${i}.raw lf.utf${i}.raw" && test_when_finished "git reset --hard HEAD^" && - cat lf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >lf.utf${i}.raw && - cat crlf.utf8.raw | iconv -f UTF-8 -t UTF-${i} >crlf.utf${i}.raw && + cat lf.utf8.raw | write_utf${i} >lf.utf${i}.raw && + cat crlf.utf8.raw | write_utf${i} >crlf.utf${i}.raw && cp crlf.utf${i}.raw eol.utf${i} && cat >expectIndexLF <<-EOF && @@ -213,7 +247,7 @@ test_expect_success ICONV_SHIFT_JIS 'check roundtrip encoding' ' text="hallo there!\nroundtrip test here!" && printf "$text" | iconv -f UTF-8 -t SHIFT-JIS >roundtrip.shift && - printf "$text" | iconv -f UTF-8 -t UTF-16 >roundtrip.utf16 && + printf "$text" | write_utf16 >roundtrip.utf16 && echo "*.shift text working-tree-encoding=SHIFT-JIS" >>.gitattributes && # SHIFT-JIS encoded files are round-trip checked by default... @@ -246,4 +280,43 @@ test_expect_success ICONV_SHIFT_JIS 'check roundtrip encoding' ' git reset ' +# $1: checkout encoding +# $2: test string +# $3: binary test string in checkout encoding +test_commit_utf8_checkout_other () { + encoding="$1" + orig_string="$2" + expect_bytes="$3" + + test_expect_success "Commit UTF-8, checkout $encoding" ' + test_when_finished "git checkout HEAD -- .gitattributes" && + + test_ext="commit_utf8_checkout_$encoding" && + test_file="test.$test_ext" && + + # Commit as UTF-8 + echo "*.$test_ext text working-tree-encoding=UTF-8" >.gitattributes && + printf "$orig_string" >$test_file && + git add $test_file && + git commit -m "Test data" && + + # Checkout in tested encoding + rm $test_file && + echo "*.$test_ext text working-tree-encoding=$encoding" >.gitattributes && + git checkout HEAD -- $test_file && + + # Test + printf $expect_bytes >$test_file.raw && + test_cmp_bin $test_file.raw $test_file + ' +} + +test_commit_utf8_checkout_other "UTF-8" "Test ТеÑÑ‚" "\124\145\163\164\040\320\242\320\265\321\201\321\202" +test_commit_utf8_checkout_other "UTF-16LE" "Test ТеÑÑ‚" "\124\000\145\000\163\000\164\000\040\000\042\004\065\004\101\004\102\004" +test_commit_utf8_checkout_other "UTF-16BE" "Test ТеÑÑ‚" "\000\124\000\145\000\163\000\164\000\040\004\042\004\065\004\101\004\102" +test_commit_utf8_checkout_other "UTF-16LE-BOM" "Test ТеÑÑ‚" "\377\376\124\000\145\000\163\000\164\000\040\000\042\004\065\004\101\004\102\004" +test_commit_utf8_checkout_other "UTF-16BE-BOM" "Test ТеÑÑ‚" "\376\377\000\124\000\145\000\163\000\164\000\040\004\042\004\065\004\101\004\102" +test_commit_utf8_checkout_other "UTF-32LE" "Test ТеÑÑ‚" "\124\000\000\000\145\000\000\000\163\000\000\000\164\000\000\000\040\000\000\000\042\004\000\000\065\004\000\000\101\004\000\000\102\004\000\000" +test_commit_utf8_checkout_other "UTF-32BE" "Test ТеÑÑ‚" "\000\000\000\124\000\000\000\145\000\000\000\163\000\000\000\164\000\000\000\040\000\000\004\042\000\000\004\065\000\000\004\101\000\000\004\102" + test_done diff --git a/t/t0030-stripspace.sh b/t/t0030-stripspace.sh index 5ce47e8..0c24a0f 100755 --- a/t/t0030-stripspace.sh +++ b/t/t0030-stripspace.sh @@ -430,9 +430,15 @@ test_expect_success '-c with changed comment char' ' test_expect_success '-c with comment char defined in .git/config' ' test_config core.commentchar = && printf "= foo\n" >expect && - printf "foo" | ( - mkdir sub && cd sub && git stripspace -c - ) >actual && + rm -fr sub && + mkdir sub && + printf "foo" | git -C sub stripspace -c >actual && + test_cmp expect actual +' + +test_expect_success '-c outside git repository' ' + printf "# foo\n" >expect && + printf "foo" | nongit git stripspace -c >actual && test_cmp expect actual ' diff --git a/t/t0040-parse-options.sh b/t/t0040-parse-options.sh index f5b1086..3483b72 100755 --- a/t/t0040-parse-options.sh +++ b/t/t0040-parse-options.sh @@ -23,6 +23,8 @@ usage: test-tool parse-options <options> -j <n> get a integer, too -m, --magnitude <n> get a magnitude --set23 set integer to 23 + --mode1 set integer to 1 (cmdmode option) + --mode2 set integer to 2 (cmdmode option) -L, --length <str> get length of <str> -F, --file <file> set file to <file> @@ -48,6 +50,12 @@ Standard options -q, --quiet be quiet --expect <string> expected output in the variable dump +Alias + -A, --alias-source <string> + get a string + -Z, --alias-target <string> + get a string + EOF test_expect_success 'test help' ' @@ -203,41 +211,56 @@ file: (not set) EOF test_expect_success 'unambiguously abbreviated option' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --int 2 --boolean --no-bo >output 2>output.err && test_must_be_empty output.err && test_cmp expect output ' test_expect_success 'unambiguously abbreviated option with "="' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --expect="integer: 2" --int=2 ' test_expect_success 'ambiguously abbreviated option' ' - test_expect_code 129 test-tool parse-options --strin 123 + test_expect_code 129 env GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --strin 123 ' test_expect_success 'non ambiguous option (after two options it abbreviates)' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --expect="string: 123" --st 123 ' +test_expect_success 'Alias options do not contribute to abbreviation' ' + test-tool parse-options --alias-source 123 >output && + grep "^string: 123" output && + test-tool parse-options --alias-target 123 >output && + grep "^string: 123" output && + test_must_fail test-tool parse-options --alias && + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --alias 123 >output && + grep "^string: 123" output +' + cat >typo.err <<\EOF -error: did you mean `--boolean` (with two dashes ?) +error: did you mean `--boolean` (with two dashes)? EOF test_expect_success 'detect possible typos' ' test_must_fail test-tool parse-options -boolean >output 2>output.err && test_must_be_empty output && - test_cmp typo.err output.err + test_i18ncmp typo.err output.err ' cat >typo.err <<\EOF -error: did you mean `--ambiguous` (with two dashes ?) +error: did you mean `--ambiguous` (with two dashes)? EOF test_expect_success 'detect possible typos' ' test_must_fail test-tool parse-options -ambiguous >output 2>output.err && test_must_be_empty output && - test_cmp typo.err output.err + test_i18ncmp typo.err output.err ' test_expect_success 'keep some options as arguments' ' @@ -303,6 +326,22 @@ test_expect_success 'OPT_NEGBIT() works' ' test-tool parse-options --expect="boolean: 6" -bb --no-neg-or4 ' +test_expect_success 'OPT_CMDMODE() works' ' + test-tool parse-options --expect="integer: 1" --mode1 +' + +test_expect_success 'OPT_CMDMODE() detects incompatibility' ' + test_must_fail test-tool parse-options --mode1 --mode2 >output 2>output.err && + test_must_be_empty output && + test_i18ngrep "incompatible with --mode" output.err +' + +test_expect_success 'OPT_CMDMODE() detects incompatibility with something else' ' + test_must_fail test-tool parse-options --set23 --mode2 >output 2>output.err && + test_must_be_empty output && + test_i18ngrep "incompatible with something else" output.err +' + test_expect_success 'OPT_COUNTUP() with PARSE_OPT_NODASH works' ' test-tool parse-options --expect="boolean: 6" + + + + + + ' @@ -325,6 +364,7 @@ file: (not set) EOF test_expect_success 'negation of OPT_NONEG flags is not ambiguous' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ test-tool parse-options --no-ambig >output 2>output.err && test_must_be_empty output.err && test_cmp expect output @@ -370,4 +410,18 @@ test_expect_success '--no-verbose resets multiple verbose to 0' ' test-tool parse-options --expect="verbose: 0" -v -v -v --no-verbose ' +test_expect_success 'GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS works' ' + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=false \ + test-tool parse-options --ye && + test_must_fail env GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true \ + test-tool parse-options --ye +' + +test_expect_success '--end-of-options treats remainder as args' ' + test-tool parse-options \ + --expect="verbose: -1" \ + --expect="arg 00: --verbose" \ + --end-of-options --verbose +' + test_done diff --git a/t/t0050-filesystem.sh b/t/t0050-filesystem.sh index 192c94e..608673f 100755 --- a/t/t0050-filesystem.sh +++ b/t/t0050-filesystem.sh @@ -131,4 +131,24 @@ $test_unicode 'merge (silent unicode normalization)' ' git merge topic ' +test_expect_success CASE_INSENSITIVE_FS 'checkout with no pathspec and a case insensitive fs' ' + git init repo && + ( + cd repo && + + >Gitweb && + git add Gitweb && + git commit -m "add Gitweb" && + + git checkout --orphan todo && + git reset --hard && + mkdir -p gitweb/subdir && + >gitweb/subdir/file && + git add gitweb && + git commit -m "add gitweb/subdir/file" && + + git checkout master + ) +' + test_done diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index b193ed4..2ea2d00 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -294,9 +294,13 @@ test_git_path GIT_OBJECT_DIRECTORY=foo objects/foo foo/foo test_git_path GIT_OBJECT_DIRECTORY=foo objects2 .git/objects2 test_expect_success 'setup common repository' 'git --git-dir=bar init' test_git_path GIT_COMMON_DIR=bar index .git/index +test_git_path GIT_COMMON_DIR=bar index.lock .git/index.lock test_git_path GIT_COMMON_DIR=bar HEAD .git/HEAD test_git_path GIT_COMMON_DIR=bar logs/HEAD .git/logs/HEAD +test_git_path GIT_COMMON_DIR=bar logs/HEAD.lock .git/logs/HEAD.lock test_git_path GIT_COMMON_DIR=bar logs/refs/bisect/foo .git/logs/refs/bisect/foo +test_git_path GIT_COMMON_DIR=bar logs/refs bar/logs/refs +test_git_path GIT_COMMON_DIR=bar logs/refs/ bar/logs/refs/ test_git_path GIT_COMMON_DIR=bar logs/refs/bisec/foo bar/logs/refs/bisec/foo test_git_path GIT_COMMON_DIR=bar logs/refs/bisec bar/logs/refs/bisec test_git_path GIT_COMMON_DIR=bar logs/refs/bisectfoo bar/logs/refs/bisectfoo @@ -465,11 +469,14 @@ test_expect_success 'match .gitmodules' ' ' test_expect_success MINGW 'is_valid_path() on Windows' ' - test-tool path-utils is_valid_path \ + test-tool path-utils is_valid_path \ win32 \ "win32 x" \ ../hello.txt \ C:\\git \ + comm \ + conout.c \ + lptN \ \ --not \ "win32 " \ @@ -477,7 +484,13 @@ test_expect_success MINGW 'is_valid_path() on Windows' ' "win32." \ "win32 . ." \ .../hello.txt \ - colon:test + colon:test \ + "AUX.c" \ + "abc/conOut\$ .xyz/test" \ + lpt8 \ + "lpt*" \ + Nul \ + "PRN./abc" ' test_done diff --git a/t/t0061-run-command.sh b/t/t0061-run-command.sh index 96bf6d6..7d59967 100755 --- a/t/t0061-run-command.sh +++ b/t/t0061-run-command.sh @@ -12,6 +12,10 @@ cat >hello-script <<-EOF cat hello-script EOF +test_expect_success MINGW 'subprocess inherits only std handles' ' + test-tool run-command inherited-handle +' + test_expect_success 'start_command reports ENOENT (slash)' ' test-tool run-command start-command-ENOENT ./does-not-exist 2>err && test_i18ngrep "\./does-not-exist" err @@ -31,7 +35,15 @@ test_expect_success 'run_command can run a command' ' test_must_be_empty err ' -test_expect_success 'run_command is restricted to PATH' ' + +test_lazy_prereq RUNS_COMMANDS_FROM_PWD ' + write_script runs-commands-from-pwd <<-\EOF && + true + EOF + runs-commands-from-pwd >/dev/null 2>&1 +' + +test_expect_success !RUNS_COMMANDS_FROM_PWD 'run_command is restricted to PATH' ' write_script should-not-run <<-\EOF && echo yikes EOF @@ -158,7 +170,8 @@ test_trace () { expect="$1" shift GIT_TRACE=1 test-tool run-command "$@" run-command true 2>&1 >/dev/null | \ - sed -e 's/.* run_command: //' -e '/trace: .*/d' >actual && + sed -e 's/.* run_command: //' -e '/trace: .*/d' \ + -e '/RUNTIME_PREFIX requested/d' >actual && echo "$expect true" >expect && test_cmp expect actual } @@ -191,4 +204,33 @@ test_expect_success 'GIT_TRACE with environment variables' ' ) ' +test_expect_success MINGW 'verify curlies are quoted properly' ' + : force the rev-parse through the MSYS2 Bash && + git -c alias.r="!git rev-parse" r -- a{b}c >actual && + cat >expect <<-\EOF && + -- + a{b}c + EOF + test_cmp expect actual +' + +test_expect_success MINGW 'can spawn .bat with argv[0] containing spaces' ' + bat="$TRASH_DIRECTORY/bat with spaces in name.bat" && + + # Every .bat invocation will log its arguments to file "out" + rm -f out && + echo "echo %* >>out" >"$bat" && + + # Ask git to invoke .bat; clone will fail due to fake SSH helper + test_must_fail env GIT_SSH="$bat" git clone myhost:src ssh-clone && + + # Spawning .bat can fail if there are two quoted cmd.exe arguments. + # .bat itself is first (due to spaces in name), so just one more is + # needed to verify. GIT_SSH will invoke .bat multiple times: + # 1) -G myhost + # 2) myhost "git-upload-pack src" + # First invocation will always succeed. Test the second one. + grep "git-upload-pack" out +' + test_done diff --git a/t/t0066-dir-iterator.sh b/t/t0066-dir-iterator.sh new file mode 100755 index 0000000..92910e4 --- /dev/null +++ b/t/t0066-dir-iterator.sh @@ -0,0 +1,148 @@ +#!/bin/sh + +test_description='Test the dir-iterator functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir -p dir && + mkdir -p dir/a/b/c/ && + >dir/b && + >dir/c && + mkdir -p dir/d/e/d/ && + >dir/a/b/c/d && + >dir/a/e && + >dir/d/e/d/a && + + mkdir -p dir2/a/b/c/ && + >dir2/a/b/c/d +' + +test_expect_success 'dir-iterator should iterate through all files' ' + cat >expected-iteration-sorted-output <<-EOF && + [d] (a) [a] ./dir/a + [d] (a/b) [b] ./dir/a/b + [d] (a/b/c) [c] ./dir/a/b/c + [d] (d) [d] ./dir/d + [d] (d/e) [e] ./dir/d/e + [d] (d/e/d) [d] ./dir/d/e/d + [f] (a/b/c/d) [d] ./dir/a/b/c/d + [f] (a/e) [e] ./dir/a/e + [f] (b) [b] ./dir/b + [f] (c) [c] ./dir/c + [f] (d/e/d/a) [a] ./dir/d/e/d/a + EOF + + test-tool dir-iterator ./dir >out && + sort out >./actual-iteration-sorted-output && + + test_cmp expected-iteration-sorted-output actual-iteration-sorted-output +' + +test_expect_success 'dir-iterator should list files in the correct order' ' + cat >expected-pre-order-output <<-EOF && + [d] (a) [a] ./dir2/a + [d] (a/b) [b] ./dir2/a/b + [d] (a/b/c) [c] ./dir2/a/b/c + [f] (a/b/c/d) [d] ./dir2/a/b/c/d + EOF + + test-tool dir-iterator ./dir2 >actual-pre-order-output && + + test_cmp expected-pre-order-output actual-pre-order-output +' + +test_expect_success 'begin should fail upon inexistent paths' ' + test_must_fail test-tool dir-iterator ./inexistent-path \ + >actual-inexistent-path-output && + echo "dir_iterator_begin failure: ENOENT" >expected-inexistent-path-output && + test_cmp expected-inexistent-path-output actual-inexistent-path-output +' + +test_expect_success 'begin should fail upon non directory paths' ' + test_must_fail test-tool dir-iterator ./dir/b >actual-non-dir-output && + echo "dir_iterator_begin failure: ENOTDIR" >expected-non-dir-output && + test_cmp expected-non-dir-output actual-non-dir-output +' + +test_expect_success POSIXPERM,SANITY 'advance should not fail on errors by default' ' + cat >expected-no-permissions-output <<-EOF && + [d] (a) [a] ./dir3/a + EOF + + mkdir -p dir3/a && + >dir3/a/b && + chmod 0 dir3/a && + + test-tool dir-iterator ./dir3 >actual-no-permissions-output && + test_cmp expected-no-permissions-output actual-no-permissions-output && + chmod 755 dir3/a && + rm -rf dir3 +' + +test_expect_success POSIXPERM,SANITY 'advance should fail on errors, w/ pedantic flag' ' + cat >expected-no-permissions-pedantic-output <<-EOF && + [d] (a) [a] ./dir3/a + dir_iterator_advance failure + EOF + + mkdir -p dir3/a && + >dir3/a/b && + chmod 0 dir3/a && + + test_must_fail test-tool dir-iterator --pedantic ./dir3 \ + >actual-no-permissions-pedantic-output && + test_cmp expected-no-permissions-pedantic-output \ + actual-no-permissions-pedantic-output && + chmod 755 dir3/a && + rm -rf dir3 +' + +test_expect_success SYMLINKS 'setup dirs with symlinks' ' + mkdir -p dir4/a && + mkdir -p dir4/b/c && + >dir4/a/d && + ln -s d dir4/a/e && + ln -s ../b dir4/a/f && + + mkdir -p dir5/a/b && + mkdir -p dir5/a/c && + ln -s ../c dir5/a/b/d && + ln -s ../ dir5/a/b/e && + ln -s ../../ dir5/a/b/f +' + +test_expect_success SYMLINKS 'dir-iterator should not follow symlinks by default' ' + cat >expected-no-follow-sorted-output <<-EOF && + [d] (a) [a] ./dir4/a + [d] (b) [b] ./dir4/b + [d] (b/c) [c] ./dir4/b/c + [f] (a/d) [d] ./dir4/a/d + [s] (a/e) [e] ./dir4/a/e + [s] (a/f) [f] ./dir4/a/f + EOF + + test-tool dir-iterator ./dir4 >out && + sort out >actual-no-follow-sorted-output && + + test_cmp expected-no-follow-sorted-output actual-no-follow-sorted-output +' + +test_expect_success SYMLINKS 'dir-iterator should follow symlinks w/ follow flag' ' + cat >expected-follow-sorted-output <<-EOF && + [d] (a) [a] ./dir4/a + [d] (a/f) [f] ./dir4/a/f + [d] (a/f/c) [c] ./dir4/a/f/c + [d] (b) [b] ./dir4/b + [d] (b/c) [c] ./dir4/b/c + [f] (a/d) [d] ./dir4/a/d + [f] (a/e) [e] ./dir4/a/e + EOF + + test-tool dir-iterator --follow-symlinks ./dir4 >out && + sort out >actual-follow-sorted-output && + + test_cmp expected-follow-sorted-output actual-follow-sorted-output +' + +test_done diff --git a/t/t0067-parse_pathspec_file.sh b/t/t0067-parse_pathspec_file.sh new file mode 100755 index 0000000..7bab49f --- /dev/null +++ b/t/t0067-parse_pathspec_file.sh @@ -0,0 +1,108 @@ +#!/bin/sh + +test_description='Test parse_pathspec_file()' + +. ./test-lib.sh + +test_expect_success 'one item from stdin' ' + cat >expect <<-\EOF && + fileA.t + EOF + + echo fileA.t | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'one item from file' ' + cat >expect <<-\EOF && + fileA.t + EOF + + echo fileA.t >list && + test-tool parse-pathspec-file --pathspec-from-file=list >actual && + + test_cmp expect actual +' + +test_expect_success 'NUL delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | + test-tool parse-pathspec-file --pathspec-from-file=- --pathspec-file-nul >actual && + + test_cmp expect actual +' + +test_expect_success 'LF delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\nfileB.t\n" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'no trailing delimiter' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\nfileB.t" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'CRLF delimiters' ' + cat >expect <<-\EOF && + fileA.t + fileB.t + EOF + + printf "fileA.t\r\nfileB.t\r\n" | + test-tool parse-pathspec-file --pathspec-from-file=- >actual && + + test_cmp expect actual +' + +test_expect_success 'quotes' ' + cat >expect <<-\EOF && + fileA.t + EOF + + cat >list <<-\EOF && + "file\101.t" + EOF + + test-tool parse-pathspec-file --pathspec-from-file=list >actual && + + test_cmp expect actual +' + +test_expect_success '--pathspec-file-nul takes quotes literally' ' + # Note: there is an extra newline because --pathspec-file-nul takes + # input \n literally, too + cat >expect <<-\EOF && + "file\101.t" + + EOF + + cat >list <<-\EOF && + "file\101.t" + EOF + + test-tool parse-pathspec-file --pathspec-from-file=list --pathspec-file-nul >actual && + + test_cmp expect actual +' + +test_done diff --git a/t/t0090-cache-tree.sh b/t/t0090-cache-tree.sh index 504334e..5a63369 100755 --- a/t/t0090-cache-tree.sh +++ b/t/t0090-cache-tree.sh @@ -21,9 +21,10 @@ generate_expected_cache_tree_rec () { parent="$2" && # ls-files might have foo/bar, foo/bar/baz, and foo/bar/quux # We want to count only foo because it's the only direct child - subtrees=$(git ls-files|grep /|cut -d / -f 1|uniq) && + git ls-files >files && + subtrees=$(grep / files|cut -d / -f 1|uniq) && subtree_count=$(echo "$subtrees"|awk -v c=0 '$1 != "" {++c} END {print c}') && - entries=$(git ls-files|wc -l) && + entries=$(wc -l <files) && printf "SHA $dir (%d entries, %d subtrees)\n" "$entries" "$subtree_count" && for subtree in $subtrees do @@ -162,8 +163,8 @@ test_expect_success PERL 'commit --interactive gives cache-tree on partial commi ' test_expect_success PERL 'commit -p with shrinking cache-tree' ' - mkdir -p deep/subdir && - echo content >deep/subdir/file && + mkdir -p deep/very-long-subdir && + echo content >deep/very-long-subdir/file && git add deep && git commit -m add && git rm -r deep && diff --git a/t/t0205-gettext-poison.sh b/t/t0205-gettext-poison.sh index a06269f..f9fa16a 100755 --- a/t/t0205-gettext-poison.sh +++ b/t/t0205-gettext-poison.sh @@ -5,7 +5,7 @@ test_description='Gettext Shell poison' -GIT_TEST_GETTEXT_POISON=YesPlease +GIT_TEST_GETTEXT_POISON=true export GIT_TEST_GETTEXT_POISON . ./lib-gettext.sh @@ -31,4 +31,9 @@ test_expect_success 'eval_gettext: our eval_gettext() fallback has poison semant test_cmp expect actual ' +test_expect_success "gettext: invalid GIT_TEST_GETTEXT_POISON value doesn't infinitely loop" " + test_must_fail env GIT_TEST_GETTEXT_POISON=xyz git version 2>error && + grep \"fatal: bad numeric config value 'xyz' for 'GIT_TEST_GETTEXT_POISON': invalid unit\" error +" + test_done diff --git a/t/t0210-trace2-normal.sh b/t/t0210-trace2-normal.sh new file mode 100755 index 0000000..ce7574e --- /dev/null +++ b/t/t0210-trace2-normal.sh @@ -0,0 +1,189 @@ +#!/bin/sh + +test_description='test trace2 facility (normal target)' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_BRIEF +sane_unset GIT_TRACE2_CONFIG_PARAMS + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# This script tests the normal target in isolation. +# +# Defer setting GIT_TRACE2 until the actual command line we want to test +# because hidden git and test-tool commands run by the test harness +# can contaminate our output. + +# Enable "brief" feature which turns off "<clock> <file>:<line> " prefix. +GIT_TRACE2_BRIEF=1 && export GIT_TRACE2_BRIEF + +# Basic tests of the trace2 normal stream. Since this stream is used +# primarily with printf-style debugging/tracing, we do limited testing +# here. +# +# We do confirm the following API features: +# [] the 'version <v>' event +# [] the 'start <argv>' event +# [] the 'cmd_name <name>' event +# [] the 'exit <time> code:<code>' event +# [] the 'atexit <time> code:<code>' event +# +# Fields of the form _FIELD_ are tokens that have been replaced (such +# as the elapsed time). + +# Verb 001return +# +# Implicit return from cmd_<verb> function propagates <code>. + +test_expect_success 'normal stream, return code 0' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'normal stream, return code 1' ' + test_when_finished "rm trace.normal actual expect" && + test_must_fail env GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 001return 1 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 1 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:1 + atexit elapsed:_TIME_ code:1 + EOF + test_cmp expect actual +' + +test_expect_success 'automatic filename' ' + test_when_finished "rm -r traces actual expect" && + mkdir traces && + GIT_TRACE2="$(pwd)/traces" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <"$(ls traces/*)" >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +# Verb 002exit +# +# Explicit exit(code) from within cmd_<verb> propagates <code>. + +test_expect_success 'normal stream, exit code 0' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 002exit 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 002exit 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'normal stream, exit code 1' ' + test_when_finished "rm trace.normal actual expect" && + test_must_fail env GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 002exit 1 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 002exit 1 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:1 + atexit elapsed:_TIME_ code:1 + EOF + test_cmp expect actual +' + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success 'normal stream, error event' ' + test_when_finished "rm trace.normal actual expect" && + GIT_TRACE2="$(pwd)/trace.normal" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 003error '\''hello world'\'' '\''this is a test'\'' + cmd_name trace2 (trace2) + error hello world + error this is a test + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +sane_unset GIT_TRACE2_BRIEF + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success 'using global config, normal stream, return code 0' ' + test_when_finished "rm trace.normal actual expect" && + test_config_global trace2.normalBrief 1 && + test_config_global trace2.normalTarget "$(pwd)/trace.normal" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'using global config with include' ' + test_when_finished "rm trace.normal actual expect real.gitconfig" && + test_config_global trace2.normalBrief 1 && + test_config_global trace2.normalTarget "$(pwd)/trace.normal" && + mv "$(pwd)/.gitconfig" "$(pwd)/real.gitconfig" && + test_config_global include.path "$(pwd)/real.gitconfig" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0210/scrub_normal.perl" <trace.normal >actual && + cat >expect <<-EOF && + version $V + start _EXE_ trace2 001return 0 + cmd_name trace2 (trace2) + exit elapsed:_TIME_ code:0 + atexit elapsed:_TIME_ code:0 + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t0210/scrub_normal.perl b/t/t0210/scrub_normal.perl new file mode 100644 index 0000000..c65d1a8 --- /dev/null +++ b/t/t0210/scrub_normal.perl @@ -0,0 +1,48 @@ +#!/usr/bin/perl +# +# Scrub the variable fields from the normal trace2 output to +# make testing easier. + +use strict; +use warnings; + +my $float = '[0-9]*\.[0-9]+([eE][-+]?[0-9]+)?'; + +# This code assumes that the trace2 data was written with bare +# turned on (which omits the "<clock> <file>:<line>" prefix. + +while (<>) { + # Various messages include an elapsed time in the middle + # of the message. Replace the time with a placeholder to + # simplify our HEREDOC in the test script. + s/elapsed:$float/elapsed:_TIME_/g; + + my $line = $_; + + # we expect: + # start <argv0> [<argv1> [<argv2> [...]]] + # + # where argv0 might be a relative or absolute path, with + # or without quotes, and platform dependent. Replace argv0 + # with a token for HEREDOC matching in the test script. + + if ($line =~ m/^start/) { + $line =~ /^start\s+(.*)/; + my $argv = $1; + $argv =~ m/(\'[^\']*\'|[^ ]+)\s+(.*)/; + my $argv_0 = $1; + my $argv_rest = $2; + + print "start _EXE_ $argv_rest\n"; + } + elsif ($line =~ m/^cmd_path/) { + # Likewise, the 'cmd_path' message breaks out argv[0]. + # + # This line is only emitted when RUNTIME_PREFIX is defined, + # so just omit it for testing purposes. + # print "cmd_path _EXE_\n"; + } + else { + print "$line"; + } +} diff --git a/t/t0211-trace2-perf.sh b/t/t0211-trace2-perf.sh new file mode 100755 index 0000000..6ee8ee3 --- /dev/null +++ b/t/t0211-trace2-perf.sh @@ -0,0 +1,174 @@ +#!/bin/sh + +test_description='test trace2 facility (perf target)' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_PERF_BRIEF +sane_unset GIT_TRACE2_CONFIG_PARAMS + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# Test each target independently. +# +# Defer setting GIT_TRACE2_PERF until the actual command we want to +# test because hidden git and test-tool commands in the test +# harness can contaminate our output. + +# Enable "brief" feature which turns off the prefix: +# "<clock> <file>:<line> | <nr_parents> | " +GIT_TRACE2_PERF_BRIEF=1 && export GIT_TRACE2_PERF_BRIEF + +# Repeat some of the t0210 tests using the perf target stream instead of +# the normal stream. +# +# Tokens here of the form _FIELD_ have been replaced in the observed output. + +# Verb 001return +# +# Implicit return from cmd_<verb> function propagates <code>. + +test_expect_success 'perf stream, return code 0' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +test_expect_success 'perf stream, return code 1' ' + test_when_finished "rm trace.perf actual expect" && + test_must_fail env GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 001return 1 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 1 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:1 + d0|main|atexit||_T_ABS_|||code:1 + EOF + test_cmp expect actual +' + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success 'perf stream, error event' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 003error '\''hello world'\'' '\''this is a test'\'' + d0|main|cmd_name|||||trace2 (trace2) + d0|main|error|||||hello world + d0|main|error|||||this is a test + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +# Verb 004child +# +# Test nested spawning of child processes. +# +# Conceptually, this looks like: +# P1: TT trace2 004child +# P2: |--- TT trace2 004child +# P3: |--- TT trace2 001return 0 +# +# Which should generate events: +# P1: version +# P1: start +# P1: cmd_name +# P1: child_start +# P2: version +# P2: start +# P2: cmd_name +# P2: child_start +# P3: version +# P3: start +# P3: cmd_name +# P3: exit +# P3: atexit +# P2: child_exit +# P2: exit +# P2: atexit +# P1: child_exit +# P1: exit +# P1: atexit + +test_expect_success 'perf stream, child processes' ' + test_when_finished "rm trace.perf actual expect" && + GIT_TRACE2_PERF="$(pwd)/trace.perf" test-tool trace2 004child test-tool trace2 004child test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 004child test-tool trace2 004child test-tool trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|child_start||_T_ABS_|||[ch0] class:? argv:[test-tool trace2 004child test-tool trace2 001return 0] + d1|main|version|||||$V + d1|main|start||_T_ABS_|||_EXE_ trace2 004child test-tool trace2 001return 0 + d1|main|cmd_name|||||trace2 (trace2/trace2) + d1|main|child_start||_T_ABS_|||[ch0] class:? argv:[test-tool trace2 001return 0] + d2|main|version|||||$V + d2|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d2|main|cmd_name|||||trace2 (trace2/trace2/trace2) + d2|main|exit||_T_ABS_|||code:0 + d2|main|atexit||_T_ABS_|||code:0 + d1|main|child_exit||_T_ABS_|_T_REL_||[ch0] pid:_PID_ code:0 + d1|main|exit||_T_ABS_|||code:0 + d1|main|atexit||_T_ABS_|||code:0 + d0|main|child_exit||_T_ABS_|_T_REL_||[ch0] pid:_PID_ code:0 + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +sane_unset GIT_TRACE2_PERF_BRIEF + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success 'using global config, perf stream, return code 0' ' + test_when_finished "rm trace.perf actual expect" && + test_config_global trace2.perfBrief 1 && + test_config_global trace2.perfTarget "$(pwd)/trace.perf" && + test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0211/scrub_perf.perl" <trace.perf >actual && + cat >expect <<-EOF && + d0|main|version|||||$V + d0|main|start||_T_ABS_|||_EXE_ trace2 001return 0 + d0|main|cmd_name|||||trace2 (trace2) + d0|main|exit||_T_ABS_|||code:0 + d0|main|atexit||_T_ABS_|||code:0 + EOF + test_cmp expect actual +' + +test_done diff --git a/t/t0211/scrub_perf.perl b/t/t0211/scrub_perf.perl new file mode 100644 index 0000000..351af78 --- /dev/null +++ b/t/t0211/scrub_perf.perl @@ -0,0 +1,76 @@ +#!/usr/bin/perl +# +# Scrub the variable fields from the perf trace2 output to +# make testing easier. + +use strict; +use warnings; + +my $qpath = '\'[^\']*\'|[^ ]*'; + +my $col_depth=0; +my $col_thread=1; +my $col_event=2; +my $col_repo=3; +my $col_t_abs=4; +my $col_t_rel=5; +my $col_category=6; +my $col_rest=7; + +# This code assumes that the trace2 data was written with bare +# turned on (which omits the "<clock> <file>:<line> | <parents>" +# prefix. + +while (<>) { + my @tokens = split /\|/; + + foreach my $col (@tokens) { $col =~ s/^\s+|\s+$//g; } + + if ($tokens[$col_event] =~ m/^start/) { + # The 'start' message lists the contents of argv in $col_rest. + # On some platforms (Windows), argv[0] is *sometimes* a canonical + # absolute path to the EXE rather than the value passed in the + # shell script. Replace it with a placeholder to simplify our + # HEREDOC in the test script. + my $argv0; + my $argvRest; + $tokens[$col_rest] =~ s/^($qpath)\W*(.*)/_EXE_ $2/; + } + elsif ($tokens[$col_event] =~ m/cmd_path/) { + # Likewise, the 'cmd_path' message breaks out argv[0]. + # + # This line is only emitted when RUNTIME_PREFIX is defined, + # so just omit it for testing purposes. + # $tokens[$col_rest] = "_EXE_"; + goto SKIP_LINE; + } + elsif ($tokens[$col_event] =~ m/child_exit/) { + $tokens[$col_rest] =~ s/ pid:\d* / pid:_PID_ /; + } + elsif ($tokens[$col_event] =~ m/data/) { + if ($tokens[$col_category] =~ m/process/) { + # 'data' and 'data_json' events containing 'process' + # category data are assumed to be platform-specific + # and highly variable. Just omit them. + goto SKIP_LINE; + } + } + + # t_abs and t_rel are either blank or a float. Replace the float + # with a constant for matching the HEREDOC in the test script. + if ($tokens[$col_t_abs] =~ m/\d/) { + $tokens[$col_t_abs] = "_T_ABS_"; + } + if ($tokens[$col_t_rel] =~ m/\d/) { + $tokens[$col_t_rel] = "_T_REL_"; + } + + my $out; + + $out = join('|', @tokens); + print "$out\n"; + + SKIP_LINE: +} + + diff --git a/t/t0212-trace2-event.sh b/t/t0212-trace2-event.sh new file mode 100755 index 0000000..7065a1b --- /dev/null +++ b/t/t0212-trace2-event.sh @@ -0,0 +1,287 @@ +#!/bin/sh + +test_description='test trace2 facility' +. ./test-lib.sh + +# Turn off any inherited trace2 settings for this test. +sane_unset GIT_TRACE2 GIT_TRACE2_PERF GIT_TRACE2_EVENT +sane_unset GIT_TRACE2_BARE +sane_unset GIT_TRACE2_CONFIG_PARAMS + +perl -MJSON::PP -e 0 >/dev/null 2>&1 && test_set_prereq JSON_PP + +# Add t/helper directory to PATH so that we can use a relative +# path to run nested instances of test-tool.exe (see 004child). +# This helps with HEREDOC comparisons later. +TTDIR="$GIT_BUILD_DIR/t/helper/" && export TTDIR +PATH="$TTDIR:$PATH" && export PATH + +# Warning: use of 'test_cmp' may run test-tool.exe and/or git.exe +# Warning: to do the actual diff/comparison, so the HEREDOCs here +# Warning: only cover our actual calls to test-tool and/or git. +# Warning: So you may see extra lines in artifact files when +# Warning: interactively debugging. + +V=$(git version | sed -e 's/^git version //') && export V + +# There are multiple trace2 targets: normal, perf, and event. +# Trace2 events will/can be written to each active target (subject +# to whatever filtering that target decides to do). +# Test each target independently. +# +# Defer setting GIT_TRACE2_PERF until the actual command we want to +# test because hidden git and test-tool commands in the test +# harness can contaminate our output. + +# We don't bother repeating the 001return and 002exit tests, since they +# have coverage in the normal and perf targets. + +# Verb 003error +# +# To the above, add multiple 'error <msg>' events + +test_expect_success JSON_PP 'event stream, error event' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "003error", + | "hello world", + | "this is a test" + | ], + | "errors":[ + | "%s", + | "%s" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Verb 004child +# +# Test nested spawning of child processes. +# +# Conceptually, this looks like: +# P1: TT trace2 004child +# P2: |--- TT trace2 004child +# P3: |--- TT trace2 001return 0 + +test_expect_success JSON_PP 'event stream, return code 0' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 004child test-tool trace2 004child test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child":{ + | "0":{ + | "child_argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child_class":"?", + | "child_code":0, + | "use_shell":0 + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | }, + | "_SID0_/_SID1_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "004child", + | "test-tool", + | "trace2", + | "001return", + | "0" + | ], + | "child":{ + | "0":{ + | "child_argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "child_class":"?", + | "child_code":0, + | "use_shell":0 + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2/trace2", + | "name":"trace2", + | "version":"$V" + | }, + | "_SID0_/_SID1_/_SID2_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2/trace2/trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Test listing of all "interesting" config settings. + +test_expect_success JSON_PP 'event stream, list config' ' + test_when_finished "rm trace.event actual expect" && + git config --local t0212.abc 1 && + git config --local t0212.def "hello world" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" GIT_TRACE2_CONFIG_PARAMS="t0212.*" test-tool trace2 001return 0 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "001return", + | "0" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "params":[ + | { + | "param":"t0212.abc", + | "value":"1" + | }, + | { + | "param":"t0212.def", + | "value":"hello world" + | } + | ], + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +test_expect_success JSON_PP 'basic trace2_data' ' + test_when_finished "rm trace.event actual expect" && + GIT_TRACE2_EVENT="$(pwd)/trace.event" test-tool trace2 006data test_category k1 v1 test_category k2 v2 && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "006data", + | "test_category", + | "k1", + | "v1", + | "test_category", + | "k2", + | "v2" + | ], + | "data":{ + | "test_category":{ + | "k1":"v1", + | "k2":"v2" + | } + | }, + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +# Now test without environment variables and get all Trace2 settings +# from the global config. + +test_expect_success JSON_PP 'using global config, event stream, error event' ' + test_when_finished "rm trace.event actual expect" && + test_config_global trace2.eventTarget "$(pwd)/trace.event" && + test-tool trace2 003error "hello world" "this is a test" && + perl "$TEST_DIRECTORY/t0212/parse_events.perl" <trace.event >actual && + sed -e "s/^|//" >expect <<-EOF && + |VAR1 = { + | "_SID0_":{ + | "argv":[ + | "_EXE_", + | "trace2", + | "003error", + | "hello world", + | "this is a test" + | ], + | "errors":[ + | "%s", + | "%s" + | ], + | "exit_code":0, + | "hierarchy":"trace2", + | "name":"trace2", + | "version":"$V" + | } + |}; + EOF + test_cmp expect actual +' + +test_expect_success 'discard traces when there are too many files' ' + mkdir trace_target_dir && + test_when_finished "rm -r trace_target_dir" && + ( + GIT_TRACE2_MAX_FILES=5 && + export GIT_TRACE2_MAX_FILES && + cd trace_target_dir && + test_seq $GIT_TRACE2_MAX_FILES >../expected_filenames.txt && + xargs touch <../expected_filenames.txt && + cd .. && + GIT_TRACE2_EVENT="$(pwd)/trace_target_dir" test-tool trace2 001return 0 + ) && + echo git-trace2-discard >>expected_filenames.txt && + ls trace_target_dir >ls_output.txt && + test_cmp expected_filenames.txt ls_output.txt && + head -n1 trace_target_dir/git-trace2-discard | grep \"event\":\"version\" && + head -n2 trace_target_dir/git-trace2-discard | tail -n1 | grep \"event\":\"too_many_files\" +' + +test_done diff --git a/t/t0212/parse_events.perl b/t/t0212/parse_events.perl new file mode 100644 index 0000000..6584bb5 --- /dev/null +++ b/t/t0212/parse_events.perl @@ -0,0 +1,251 @@ +#!/usr/bin/perl +# +# Parse event stream and convert individual events into a summary +# record for the process. +# +# Git.exe generates one or more "event" records for each API method, +# such as "start <argv>" and "exit <code>", during the life of the git +# process. Additionally, the input may contain interleaved events +# from multiple concurrent git processes and/or multiple threads from +# within a git process. +# +# Accumulate events for each process (based on its unique SID) in a +# dictionary and emit process summary records. +# +# Convert some of the variable fields (such as elapsed time) into +# placeholders (or omit them) to make HEREDOC comparisons easier in +# the test scripts. +# +# We may also omit fields not (currently) useful for testing purposes. + +use strict; +use warnings; +use JSON::PP; +use Data::Dumper; +use Getopt::Long; + +# The version of the trace2 event target format that we understand. +# This is reported in the 'version' event in the 'evt' field. +# It comes from the GIT_TRACE2_EVENT_VERSION macro in trace2/tr2_tgt_event.c +my $evt_version = '1'; + +my $show_children = 1; +my $show_exec = 1; +my $show_threads = 1; + +# A hack to generate test HEREDOC data for pasting into the test script. +# Usage: +# cd "t/trash directory.t0212-trace2-event" +# $TT trace ... >trace.event +# VV=$(../../git.exe version | sed -e 's/^git version //') +# perl ../t0212/parse_events.perl --HEREDOC --VERSION=$VV <trace.event >heredoc +# Then paste heredoc into your new test. + +my $gen_heredoc = 0; +my $gen_version = ''; + +GetOptions("children!" => \$show_children, + "exec!" => \$show_exec, + "threads!" => \$show_threads, + "HEREDOC!" => \$gen_heredoc, + "VERSION=s" => \$gen_version ) + or die("Error in command line arguments\n"); + + +# SIDs contains timestamps and PIDs of the process and its parents. +# This makes it difficult to match up in a HEREDOC in the test script. +# Build a map from actual SIDs to predictable constant values and yet +# keep the parent/child relationships. For example: +# {..., "sid":"1539706952458276-8652", ...} +# {..., "sid":"1539706952458276-8652/1539706952649493-15452", ...} +# becomes: +# {..., "sid":"_SID1_", ...} +# {..., "sid":"_SID1_/_SID2_", ...} +my $sid_map; +my $sid_count = 0; + +my $processes; + +while (<>) { + my $line = decode_json( $_ ); + + my $sid = ""; + my $sid_sep = ""; + + my $raw_sid = $line->{'sid'}; + my @raw_sid_parts = split /\//, $raw_sid; + foreach my $raw_sid_k (@raw_sid_parts) { + if (!exists $sid_map->{$raw_sid_k}) { + $sid_map->{$raw_sid_k} = '_SID' . $sid_count . '_'; + $sid_count++; + } + $sid = $sid . $sid_sep . $sid_map->{$raw_sid_k}; + $sid_sep = '/'; + } + + my $event = $line->{'event'}; + + if ($event eq 'version') { + $processes->{$sid}->{'version'} = $line->{'exe'}; + if ($gen_heredoc == 1 && $gen_version eq $line->{'exe'}) { + # If we are generating data FOR the test script, replace + # the reported git.exe version with a reference to an + # environment variable. When our output is pasted into + # the test script, it will then be expanded in future + # test runs to the THEN current version of git.exe. + # We assume that the test script uses env var $V. + $processes->{$sid}->{'version'} = "\$V"; + } + } + + elsif ($event eq 'start') { + $processes->{$sid}->{'argv'} = $line->{'argv'}; + $processes->{$sid}->{'argv'}[0] = "_EXE_"; + } + + elsif ($event eq 'exit') { + $processes->{$sid}->{'exit_code'} = $line->{'code'}; + } + + elsif ($event eq 'atexit') { + $processes->{$sid}->{'exit_code'} = $line->{'code'}; + } + + elsif ($event eq 'error') { + # For HEREDOC purposes, use the error message format string if + # available, rather than the formatted message (which probably + # has an absolute pathname). + if (exists $line->{'fmt'}) { + push( @{$processes->{$sid}->{'errors'}}, $line->{'fmt'} ); + } + elsif (exists $line->{'msg'}) { + push( @{$processes->{$sid}->{'errors'}}, $line->{'msg'} ); + } + } + + elsif ($event eq 'cmd_path') { + ## $processes->{$sid}->{'path'} = $line->{'path'}; + # + # Like in the 'start' event, we need to replace the value of + # argv[0] with a token for HEREDOC purposes. However, the + # event is only emitted when RUNTIME_PREFIX is defined, so + # just omit it for testing purposes. + # $processes->{$sid}->{'path'} = "_EXE_"; + } + + elsif ($event eq 'cmd_name') { + $processes->{$sid}->{'name'} = $line->{'name'}; + $processes->{$sid}->{'hierarchy'} = $line->{'hierarchy'}; + } + + elsif ($event eq 'alias') { + $processes->{$sid}->{'alias'}->{'key'} = $line->{'alias'}; + $processes->{$sid}->{'alias'}->{'argv'} = $line->{'argv'}; + } + + elsif ($event eq 'def_param') { + my $kv; + $kv->{'param'} = $line->{'param'}; + $kv->{'value'} = $line->{'value'}; + push( @{$processes->{$sid}->{'params'}}, $kv ); + } + + elsif ($event eq 'child_start') { + if ($show_children == 1) { + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_class'} = $line->{'child_class'}; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_argv'} = $line->{'argv'}; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_argv'}[0] = "_EXE_"; + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'use_shell'} = $line->{'use_shell'} ? 1 : 0; + } + } + + elsif ($event eq 'child_exit') { + if ($show_children == 1) { + $processes->{$sid}->{'child'}->{$line->{'child_id'}}->{'child_code'} = $line->{'code'}; + } + } + + # TODO decide what information we want to test from thread events. + + elsif ($event eq 'thread_start') { + if ($show_threads == 1) { + } + } + + elsif ($event eq 'thread_exit') { + if ($show_threads == 1) { + } + } + + # TODO decide what information we want to test from exec events. + + elsif ($event eq 'exec') { + if ($show_exec == 1) { + } + } + + elsif ($event eq 'exec_result') { + if ($show_exec == 1) { + } + } + + elsif ($event eq 'def_param') { + # Accumulate parameter key/value pairs by key rather than in an array + # so that we get overwrite (last one wins) effects. + $processes->{$sid}->{'params'}->{$line->{'param'}} = $line->{'value'}; + } + + elsif ($event eq 'def_repo') { + # $processes->{$sid}->{'repos'}->{$line->{'repo'}} = $line->{'worktree'}; + $processes->{$sid}->{'repos'}->{$line->{'repo'}} = "_WORKTREE_"; + } + + # A series of potentially nested and threaded region and data events + # is fundamentally incompatibile with the type of summary record we + # are building in this script. Since they are intended for + # perf-trace-like analysis rather than a result summary, we ignore + # most of them here. + + # elsif ($event eq 'region_enter') { + # } + # elsif ($event eq 'region_leave') { + # } + + elsif ($event eq 'data') { + my $cat = $line->{'category'}; + if ($cat eq 'test_category') { + + my $key = $line->{'key'}; + my $value = $line->{'value'}; + $processes->{$sid}->{'data'}->{$cat}->{$key} = $value; + } + } + + # This trace2 target does not emit 'printf' events. + # + # elsif ($event eq 'printf') { + # } +} + +# Dump the resulting hash into something that we can compare against +# in the test script. These options make Dumper output look a little +# bit like JSON. Also convert variable references of the form "$VAR*" +# so that the matching HEREDOC doesn't need to escape it. + +$Data::Dumper::Sortkeys = 1; +$Data::Dumper::Indent = 1; +$Data::Dumper::Purity = 1; +$Data::Dumper::Pair = ':'; + +my $out = Dumper($processes); +$out =~ s/'/"/g; +$out =~ s/\$VAR/VAR/g; + +# Finally, if we're running this script to generate (manually confirmed) +# data to add to the test script, guard the indentation. + +if ($gen_heredoc == 1) { + $out =~ s/^/\t\|/gms; +} + +print $out; diff --git a/t/t0300-credentials.sh b/t/t0300-credentials.sh index 82eaaea..39f097e 100755 --- a/t/t0300-credentials.sh +++ b/t/t0300-credentials.sh @@ -240,6 +240,57 @@ test_expect_success 'do not match configured credential' ' EOF ' +test_expect_success 'match multiple configured helpers' ' + test_config credential.helper "verbatim \"\" \"\"" && + test_config credential.https://example.com.helper "$HELPER" && + check fill <<-\EOF + protocol=https + host=example.com + path=repo.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + EOF +' + +test_expect_success 'match multiple configured helpers with URLs' ' + test_config credential.https://example.com/repo.git.helper "verbatim \"\" \"\"" && + test_config credential.https://example.com.helper "$HELPER" && + check fill <<-\EOF + protocol=https + host=example.com + path=repo.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + EOF +' + +test_expect_success 'match percent-encoded values' ' + test_config credential.https://example.com/%2566.git.helper "$HELPER" && + check fill <<-\EOF + url=https://example.com/%2566.git + -- + protocol=https + host=example.com + username=foo + password=bar + -- + EOF +' + test_expect_success 'pull username from config' ' test_config credential.https://example.com.username foo && check fill <<-\EOF @@ -255,6 +306,63 @@ test_expect_success 'pull username from config' ' EOF ' +test_expect_success 'honors username from URL over helper (URL)' ' + test_config credential.https://example.com.username bob && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + url=https://alice@example.com + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + +test_expect_success 'honors username from URL over helper (components)' ' + test_config credential.https://example.com.username bob && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + protocol=https + host=example.com + username=alice + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + +test_expect_success 'last matching username wins' ' + test_config credential.https://example.com/path.git.username bob && + test_config credential.https://example.com.username alice && + test_config credential.https://example.com.helper "verbatim \"\" bar" && + check fill <<-\EOF + url=https://example.com/path.git + -- + protocol=https + host=example.com + username=alice + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.com + verbatim: username=alice + EOF +' + test_expect_success 'http paths can be part of context' ' check fill "verbatim foo bar" <<-\EOF && protocol=https @@ -289,6 +397,26 @@ test_expect_success 'http paths can be part of context' ' EOF ' +test_expect_success 'context uses urlmatch' ' + test_config "credential.https://*.org.useHttpPath" true && + check fill "verbatim foo bar" <<-\EOF + protocol=https + host=example.org + path=foo.git + -- + protocol=https + host=example.org + path=foo.git + username=foo + password=bar + -- + verbatim: get + verbatim: protocol=https + verbatim: host=example.org + verbatim: path=foo.git + EOF +' + test_expect_success 'helpers can abort the process' ' test_must_fail git \ -c credential.helper="!f() { echo quit=1; }; f" \ diff --git a/t/t0301-credential-cache.sh b/t/t0301-credential-cache.sh index fd92533..ebd5fa5 100755 --- a/t/t0301-credential-cache.sh +++ b/t/t0301-credential-cache.sh @@ -10,7 +10,7 @@ test -z "$NO_UNIX_SOCKETS" || { } # don't leave a stale daemon running -trap 'code=$?; git credential-cache exit; (exit $code); die' EXIT +test_atexit 'git credential-cache exit' # test that the daemon works with no special setup helper_test cache @@ -108,9 +108,4 @@ test_expect_success SYMLINKS 'use user socket if user directory is a symlink to helper_test_timeout cache --timeout=1 -# we can't rely on our "trap" above working after test_done, -# as test_done will delete the trash directory containing -# our socket, leaving us with no way to access the daemon. -git credential-cache exit - test_done diff --git a/t/t0410-partial-clone.sh b/t/t0410-partial-clone.sh index ba3887f..a3988bd 100755 --- a/t/t0410-partial-clone.sh +++ b/t/t0410-partial-clone.sh @@ -26,7 +26,7 @@ promise_and_delete () { test_expect_success 'extensions.partialclone without filter' ' test_create_repo server && git clone --filter="blob:none" "file://$(pwd)/server" client && - git -C client config --unset core.partialclonefilter && + git -C client config --unset remote.origin.partialclonefilter && git -C client fetch origin ' @@ -166,8 +166,9 @@ test_expect_success 'fetching of missing objects' ' # associated packfile contains the object ls repo/.git/objects/pack/pack-*.promisor >promisorlist && test_line_count = 1 promisorlist && - IDX=$(cat promisorlist | sed "s/promisor$/idx/") && - git verify-pack --verbose "$IDX" | grep "$HASH" + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH" out ' test_expect_success 'fetching of missing objects works with ref-in-want enabled' ' @@ -182,8 +183,55 @@ test_expect_success 'fetching of missing objects works with ref-in-want enabled' grep "git< fetch=.*ref-in-want" trace ' +test_expect_success 'fetching of missing objects from another promisor remote' ' + git clone "file://$(pwd)/server" server2 && + test_commit -C server2 bar && + git -C server2 repack -a -d --write-bitmap-index && + HASH2=$(git -C server2 rev-parse bar) && + + git -C repo remote add server2 "file://$(pwd)/server2" && + git -C repo config remote.server2.promisor true && + git -C repo cat-file -p "$HASH2" && + + git -C repo fetch server2 && + rm -rf repo/.git/objects/* && + git -C repo cat-file -p "$HASH2" && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH2" out +' + +test_expect_success 'fetching of missing objects configures a promisor remote' ' + git clone "file://$(pwd)/server" server3 && + test_commit -C server3 baz && + git -C server3 repack -a -d --write-bitmap-index && + HASH3=$(git -C server3 rev-parse baz) && + git -C server3 config uploadpack.allowfilter 1 && + + rm repo/.git/objects/pack/pack-*.promisor && + + git -C repo remote add server3 "file://$(pwd)/server3" && + git -C repo fetch --filter="blob:none" server3 $HASH3 && + + test_cmp_config -C repo true remote.server3.promisor && + + # Ensure that the .promisor file is written, and check that its + # associated packfile contains the object + ls repo/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH3" out +' + test_expect_success 'fetching of missing blobs works' ' - rm -rf server repo && + rm -rf server server2 repo && + rm -rf server server3 repo && test_create_repo server && test_commit -C server foo && git -C server repack -a -d --write-bitmap-index && @@ -234,7 +282,7 @@ test_expect_success 'rev-list stops traversal at missing and promised commit' ' git -C repo config core.repositoryformatversion 1 && git -C repo config extensions.partialclone "arbitrary string" && - GIT_TEST_COMMIT_GRAPH=0 git -C repo rev-list --exclude-promisor-objects --objects bar >out && + GIT_TEST_COMMIT_GRAPH=0 git -C repo -c core.commitGraph=false rev-list --exclude-promisor-objects --objects bar >out && grep $(git -C repo rev-parse bar) out && ! grep $FOO out ' @@ -349,7 +397,7 @@ test_expect_success 'rev-list stops traversal at promisor commit, tree, and blob grep $(git -C repo rev-parse bar) out # sanity check that some walking was done ' -test_expect_success 'rev-list accepts missing and promised objects on command line' ' +test_expect_success 'rev-list dies for missing objects on cmd line' ' rm -rf repo && test_create_repo repo && test_commit -C repo foo && @@ -366,7 +414,32 @@ test_expect_success 'rev-list accepts missing and promised objects on command li git -C repo config core.repositoryformatversion 1 && git -C repo config extensions.partialclone "arbitrary string" && - git -C repo rev-list --exclude-promisor-objects --objects "$COMMIT" "$TREE" "$BLOB" + + for OBJ in "$COMMIT" "$TREE" "$BLOB"; do + test_must_fail git -C repo rev-list --objects \ + --exclude-promisor-objects "$OBJ" && + test_must_fail git -C repo rev-list --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" && + + # Do not die or crash when --ignore-missing is passed. + git -C repo rev-list --ignore-missing --objects \ + --exclude-promisor-objects "$OBJ" && + git -C repo rev-list --ignore-missing --objects-edge-aggressive \ + --exclude-promisor-objects "$OBJ" + done +' + +test_expect_success 'single promisor remote can be re-initialized gracefully' ' + # ensure one promisor is in the promisors list + rm -rf repo && + test_create_repo repo && + test_create_repo other && + git -C repo remote add foo "file://$(pwd)/other" && + git -C repo config remote.foo.promisor true && + git -C repo config extensions.partialclone foo && + + # reinitialize the promisors list + git -C repo fetch --filter=blob:none foo ' test_expect_success 'gc repacks promisor objects separately from non-promisor objects' ' @@ -480,7 +553,20 @@ test_expect_success 'gc stops traversal when a missing but promised object is re ! grep "$TREE_HASH" out ' -LIB_HTTPD_PORT=12345 # default port, 410, cannot be used as non-root +test_expect_success 'do not fetch when checking existence of tree we construct ourselves' ' + rm -rf repo && + test_create_repo repo && + test_commit -C repo base && + test_commit -C repo side1 && + git -C repo checkout base && + test_commit -C repo side2 && + + git -C repo config core.repositoryformatversion 1 && + git -C repo config extensions.partialclone "arbitrary string" && + + git -C repo cherry-pick side1 +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd @@ -503,10 +589,12 @@ test_expect_success 'fetching of missing objects from an HTTP server' ' # associated packfile contains the object ls repo/.git/objects/pack/pack-*.promisor >promisorlist && test_line_count = 1 promisorlist && - IDX=$(cat promisorlist | sed "s/promisor$/idx/") && - git verify-pack --verbose "$IDX" | grep "$HASH" + IDX=$(sed "s/promisor$/idx/" promisorlist) && + git verify-pack --verbose "$IDX" >out && + grep "$HASH" out ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t0500-progress-display.sh b/t/t0500-progress-display.sh new file mode 100755 index 0000000..d2d088d --- /dev/null +++ b/t/t0500-progress-display.sh @@ -0,0 +1,286 @@ +#!/bin/sh + +test_description='progress display' + +. ./test-lib.sh + +show_cr () { + tr '\015' Q | sed -e "s/Q/<CR>\\$LF/g" +} + +test_expect_success 'simple progress display' ' + cat >expect <<-\EOF && + Working hard: 1<CR> + Working hard: 2<CR> + Working hard: 5<CR> + Working hard: 5, done. + EOF + + cat >in <<-\EOF && + update + progress 1 + update + progress 2 + progress 3 + progress 4 + update + progress 5 + EOF + test-tool progress "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display with total' ' + cat >expect <<-\EOF && + Working hard: 33% (1/3)<CR> + Working hard: 66% (2/3)<CR> + Working hard: 100% (3/3)<CR> + Working hard: 100% (3/3), done. + EOF + + cat >in <<-\EOF && + progress 1 + progress 2 + progress 3 + EOF + test-tool progress --total=3 "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display breaks long lines #1' ' + sed -e "s/Z$//" >expect <<\EOF && +Working hard.......2.........3.........4.........5.........6: 0% (100/100000)<CR> +Working hard.......2.........3.........4.........5.........6: 1% (1000/100000)<CR> +Working hard.......2.........3.........4.........5.........6: Z + 10% (10000/100000)<CR> + 100% (100000/100000)<CR> + 100% (100000/100000), done. +EOF + + cat >in <<-\EOF && + progress 100 + progress 1000 + progress 10000 + progress 100000 + EOF + test-tool progress --total=100000 \ + "Working hard.......2.........3.........4.........5.........6" \ + <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display breaks long lines #2' ' + # Note: we do not need that many spaces after the title to cover up + # the last line before breaking the progress line. + sed -e "s/Z$//" >expect <<\EOF && +Working hard.......2.........3.........4.........5.........6: 0% (1/100000)<CR> +Working hard.......2.........3.........4.........5.........6: 0% (2/100000)<CR> +Working hard.......2.........3.........4.........5.........6: Z + 10% (10000/100000)<CR> + 100% (100000/100000)<CR> + 100% (100000/100000), done. +EOF + + cat >in <<-\EOF && + update + progress 1 + update + progress 2 + progress 10000 + progress 100000 + EOF + test-tool progress --total=100000 \ + "Working hard.......2.........3.........4.........5.........6" \ + <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display breaks long lines #3 - even the first is too long' ' + # Note: we do not actually need any spaces at the end of the title + # line, because there is no previous progress line to cover up. + sed -e "s/Z$//" >expect <<\EOF && +Working hard.......2.........3.........4.........5.........6: Z + 25% (25000/100000)<CR> + 50% (50000/100000)<CR> + 75% (75000/100000)<CR> + 100% (100000/100000)<CR> + 100% (100000/100000), done. +EOF + + cat >in <<-\EOF && + progress 25000 + progress 50000 + progress 75000 + progress 100000 + EOF + test-tool progress --total=100000 \ + "Working hard.......2.........3.........4.........5.........6" \ + <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display breaks long lines #4 - title line matches terminal width' ' + cat >expect <<\EOF && +Working hard.......2.........3.........4.........5.........6.........7.........: + 25% (25000/100000)<CR> + 50% (50000/100000)<CR> + 75% (75000/100000)<CR> + 100% (100000/100000)<CR> + 100% (100000/100000), done. +EOF + + cat >in <<-\EOF && + progress 25000 + progress 50000 + progress 75000 + progress 100000 + EOF + test-tool progress --total=100000 \ + "Working hard.......2.........3.........4.........5.........6.........7........." \ + <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +# Progress counter goes backwards, this should not happen in practice. +test_expect_success 'progress shortens - crazy caller' ' + cat >expect <<-\EOF && + Working hard: 10% (100/1000)<CR> + Working hard: 20% (200/1000)<CR> + Working hard: 0% (1/1000) <CR> + Working hard: 100% (1000/1000)<CR> + Working hard: 100% (1000/1000), done. + EOF + + cat >in <<-\EOF && + progress 100 + progress 200 + progress 1 + progress 1000 + EOF + test-tool progress --total=1000 "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display with throughput' ' + cat >expect <<-\EOF && + Working hard: 10<CR> + Working hard: 20, 200.00 KiB | 100.00 KiB/s<CR> + Working hard: 30, 300.00 KiB | 100.00 KiB/s<CR> + Working hard: 40, 400.00 KiB | 100.00 KiB/s<CR> + Working hard: 40, 400.00 KiB | 100.00 KiB/s, done. + EOF + + cat >in <<-\EOF && + throughput 102400 1000 + update + progress 10 + throughput 204800 2000 + update + progress 20 + throughput 307200 3000 + update + progress 30 + throughput 409600 4000 + update + progress 40 + EOF + test-tool progress "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'progress display with throughput and total' ' + cat >expect <<-\EOF && + Working hard: 25% (10/40)<CR> + Working hard: 50% (20/40), 200.00 KiB | 100.00 KiB/s<CR> + Working hard: 75% (30/40), 300.00 KiB | 100.00 KiB/s<CR> + Working hard: 100% (40/40), 400.00 KiB | 100.00 KiB/s<CR> + Working hard: 100% (40/40), 400.00 KiB | 100.00 KiB/s, done. + EOF + + cat >in <<-\EOF && + throughput 102400 1000 + progress 10 + throughput 204800 2000 + progress 20 + throughput 307200 3000 + progress 30 + throughput 409600 4000 + progress 40 + EOF + test-tool progress --total=40 "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'cover up after throughput shortens' ' + cat >expect <<-\EOF && + Working hard: 1<CR> + Working hard: 2, 800.00 KiB | 400.00 KiB/s<CR> + Working hard: 3, 1.17 MiB | 400.00 KiB/s <CR> + Working hard: 4, 1.56 MiB | 400.00 KiB/s<CR> + Working hard: 4, 1.56 MiB | 400.00 KiB/s, done. + EOF + + cat >in <<-\EOF && + throughput 409600 1000 + update + progress 1 + throughput 819200 2000 + update + progress 2 + throughput 1228800 3000 + update + progress 3 + throughput 1638400 4000 + update + progress 4 + EOF + test-tool progress "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_expect_success 'cover up after throughput shortens a lot' ' + cat >expect <<-\EOF && + Working hard: 1<CR> + Working hard: 2, 1000.00 KiB | 1000.00 KiB/s<CR> + Working hard: 3, 3.00 MiB | 1.50 MiB/s <CR> + Working hard: 3, 3.00 MiB | 1024.00 KiB/s, done. + EOF + + cat >in <<-\EOF && + throughput 1 1000 + update + progress 1 + throughput 1024000 2000 + update + progress 2 + throughput 3145728 3000 + update + progress 3 + EOF + test-tool progress "Working hard" <in 2>stderr && + + show_cr <stderr >out && + test_i18ncmp expect out +' + +test_done diff --git a/t/t1007-hash-object.sh b/t/t1007-hash-object.sh index a377530..64b340f 100755 --- a/t/t1007-hash-object.sh +++ b/t/t1007-hash-object.sh @@ -9,22 +9,19 @@ echo_without_newline() { } test_blob_does_not_exist() { - test_expect_success SHA1 'blob does not exist in database' " + test_expect_success 'blob does not exist in database' " test_must_fail git cat-file blob $1 " } test_blob_exists() { - test_expect_success SHA1 'blob exists in database' " + test_expect_success 'blob exists in database' " git cat-file blob $1 " } hello_content="Hello World" -hello_sha1=5e1c309dae7f45e0f39b1bf3ac3cd9db12e7d689 - example_content="This is an example" -example_sha1=ddd3f836d3e3fbb7ae289aa9ae83536f76956399 setup_repo() { echo_without_newline "$hello_content" > hello @@ -44,7 +41,16 @@ pop_repo() { rm -rf $test_repo } -setup_repo +test_expect_success 'setup' ' + setup_repo && + test_oid_cache <<-EOF + hello sha1:5e1c309dae7f45e0f39b1bf3ac3cd9db12e7d689 + hello sha256:1e3b6c04d2eeb2b3e45c8a330445404c0b7cc7b257e2b097167d26f5230090c4 + + example sha1:ddd3f836d3e3fbb7ae289aa9ae83536f76956399 + example sha256:b44fe1fe65589848253737db859bd490453510719d7424daab03daf0767b85ae + EOF +' # Argument checking @@ -73,23 +79,23 @@ test_expect_success "Can't use --path with --no-filters" ' push_repo -test_expect_success SHA1 'hash a file' ' - test $hello_sha1 = $(git hash-object hello) +test_expect_success 'hash a file' ' + test "$(test_oid hello)" = $(git hash-object hello) ' -test_blob_does_not_exist $hello_sha1 +test_blob_does_not_exist "$(test_oid hello)" -test_expect_success SHA1 'hash from stdin' ' - test $example_sha1 = $(git hash-object --stdin < example) +test_expect_success 'hash from stdin' ' + test "$(test_oid example)" = $(git hash-object --stdin < example) ' -test_blob_does_not_exist $example_sha1 +test_blob_does_not_exist "$(test_oid example)" -test_expect_success SHA1 'hash a file and write to database' ' - test $hello_sha1 = $(git hash-object -w hello) +test_expect_success 'hash a file and write to database' ' + test "$(test_oid hello)" = $(git hash-object -w hello) ' -test_blob_exists $hello_sha1 +test_blob_exists "$(test_oid hello)" test_expect_success 'git hash-object --stdin file1 <file0 first operates on file0, then file1' ' echo foo > file1 && @@ -161,11 +167,11 @@ pop_repo for args in "-w --stdin" "--stdin -w"; do push_repo - test_expect_success SHA1 "hash from stdin and write to database ($args)" ' - test $example_sha1 = $(git hash-object $args < example) + test_expect_success "hash from stdin and write to database ($args)" ' + test "$(test_oid example)" = $(git hash-object $args < example) ' - test_blob_exists $example_sha1 + test_blob_exists "$(test_oid example)" pop_repo done @@ -173,22 +179,22 @@ done filenames="hello example" -sha1s="$hello_sha1 -$example_sha1" +oids="$(test_oid hello) +$(test_oid example)" -test_expect_success SHA1 "hash two files with names on stdin" ' - test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" +test_expect_success "hash two files with names on stdin" ' + test "$oids" = "$(echo_without_newline "$filenames" | git hash-object --stdin-paths)" ' for args in "-w --stdin-paths" "--stdin-paths -w"; do push_repo - test_expect_success SHA1 "hash two files with names on stdin and write to database ($args)" ' - test "$sha1s" = "$(echo_without_newline "$filenames" | git hash-object $args)" + test_expect_success "hash two files with names on stdin and write to database ($args)" ' + test "$oids" = "$(echo_without_newline "$filenames" | git hash-object $args)" ' - test_blob_exists $hello_sha1 - test_blob_exists $example_sha1 + test_blob_exists "$(test_oid hello)" + test_blob_exists "$(test_oid example)" pop_repo done @@ -199,10 +205,6 @@ test_expect_success 'too-short tree' ' test_i18ngrep "too-short tree object" err ' -hex2oct() { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'malformed mode in tree' ' hex_sha1=$(echo foo | git hash-object --stdin -w) && bin_sha1=$(echo $hex_sha1 | hex2oct) && diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh index ba71b15..eb44baf 100755 --- a/t/t1011-read-tree-sparse-checkout.sh +++ b/t/t1011-read-tree-sparse-checkout.sh @@ -215,7 +215,6 @@ test_expect_success 'read-tree adds to worktree, dirty case' ' ' test_expect_success 'index removal and worktree narrowing at the same time' ' - >empty && echo init.t >.git/info/sparse-checkout && echo sub/added >>.git/info/sparse-checkout && git checkout -f top && @@ -223,7 +222,7 @@ test_expect_success 'index removal and worktree narrowing at the same time' ' git checkout removed && git ls-files sub/added >result && test ! -f sub/added && - test_cmp empty result + test_must_be_empty result ' test_expect_success 'read-tree --reset removes outside worktree' ' diff --git a/t/t1050-large.sh b/t/t1050-large.sh index 1a9b21b..184b479 100755 --- a/t/t1050-large.sh +++ b/t/t1050-large.sh @@ -8,7 +8,7 @@ test_description='adding and checking out large blobs' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } test_expect_success setup ' @@ -53,7 +53,8 @@ test_expect_success 'add a large file or two' ' for p in .git/objects/pack/pack-*.pack do count=$(( $count + 1 )) - if test -f "$p" && idx=${p%.pack}.idx && test -f "$idx" + if test_path_is_file "$p" && + idx=${p%.pack}.idx && test_path_is_file "$idx" then continue fi @@ -65,7 +66,7 @@ test_expect_success 'add a large file or two' ' test $cnt = 2 && for l in .git/objects/??/?????????????????????????????????????? do - test -f "$l" || continue + test_path_is_file "$l" || continue bad=t done && test -z "$bad" && @@ -76,7 +77,8 @@ test_expect_success 'add a large file or two' ' for p in .git/objects/pack/pack-*.pack do count=$(( $count + 1 )) - if test -f "$p" && idx=${p%.pack}.idx && test -f "$idx" + if test_path_is_file "$p" && + idx=${p%.pack}.idx && test_path_is_file "$idx" then continue fi @@ -111,7 +113,7 @@ test_expect_success 'packsize limit' ' count=0 && for pi in .git/objects/pack/pack-*.idx do - test -f "$pi" && count=$(( $count + 1 )) + test_path_is_file "$pi" && count=$(( $count + 1 )) done && test $count = 2 && @@ -194,15 +196,15 @@ test_expect_success 'pack-objects with large loose object' ' test_cmp huge actual ' -test_expect_success 'tar achiving' ' +test_expect_success 'tar archiving' ' git archive --format=tar HEAD >/dev/null ' -test_expect_success 'zip achiving, store only' ' +test_expect_success 'zip archiving, store only' ' git archive --format=zip -0 HEAD >/dev/null ' -test_expect_success 'zip achiving, deflate' ' +test_expect_success 'zip archiving, deflate' ' git archive --format=zip HEAD >/dev/null ' diff --git a/t/t1060-object-corruption.sh b/t/t1060-object-corruption.sh index 4feb651..bc89371 100755 --- a/t/t1060-object-corruption.sh +++ b/t/t1060-object-corruption.sh @@ -127,4 +127,14 @@ test_expect_success 'fetch into corrupted repo with index-pack' ' ) ' +test_expect_success 'internal tree objects are not "missing"' ' + git init missing-empty && + ( + cd missing-empty && + empty_tree=$(git hash-object -t tree /dev/null) && + commit=$(echo foo | git commit-tree $empty_tree) && + git rev-list --objects $commit + ) +' + test_done diff --git a/t/t1090-sparse-checkout-scope.sh b/t/t1090-sparse-checkout-scope.sh index 090b7fc..40cc004 100755 --- a/t/t1090-sparse-checkout-scope.sh +++ b/t/t1090-sparse-checkout-scope.sh @@ -31,20 +31,6 @@ test_expect_success 'perform sparse checkout of master' ' test_path_is_file c ' -test_expect_success 'checkout -b checkout.optimizeNewBranch interaction' ' - cp .git/info/sparse-checkout .git/info/sparse-checkout.bak && - test_when_finished " - mv -f .git/info/sparse-checkout.bak .git/info/sparse-checkout - git checkout master - " && - echo "/b" >>.git/info/sparse-checkout && - test "$(git ls-files -t b)" = "S b" && - git -c checkout.optimizeNewBranch=true checkout -b fast && - test "$(git ls-files -t b)" = "S b" && - git checkout -b slow && - test "$(git ls-files -t b)" = "H b" -' - test_expect_success 'merge feature branch into sparse checkout of master' ' git merge feature && test_path_is_file a && diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh new file mode 100755 index 0000000..b4c9c32 --- /dev/null +++ b/t/t1091-sparse-checkout-builtin.sh @@ -0,0 +1,524 @@ +#!/bin/sh + +test_description='sparse checkout builtin tests' + +. ./test-lib.sh + +list_files() { + # Do not replace this with 'ls "$1"', as "ls" with BSD-lineage + # enables "-A" by default for root and ends up including ".git" and + # such in its output. (Note, though, that running the test suite as + # root is generally not recommended.) + (cd "$1" && printf '%s\n' *) +} + +check_files() { + list_files "$1" >actual && + shift && + printf "%s\n" $@ >expect && + test_cmp expect actual +} + +test_expect_success 'setup' ' + git init repo && + ( + cd repo && + echo "initial" >a && + mkdir folder1 folder2 deep && + mkdir deep/deeper1 deep/deeper2 && + mkdir deep/deeper1/deepest && + cp a folder1 && + cp a folder2 && + cp a deep && + cp a deep/deeper1 && + cp a deep/deeper2 && + cp a deep/deeper1/deepest && + git add . && + git commit -m "initial commit" + ) +' + +test_expect_success 'git sparse-checkout list (empty)' ' + git -C repo sparse-checkout list >list 2>err && + test_must_be_empty list && + test_i18ngrep "this worktree is not sparse (sparse-checkout file may not exist)" err +' + +test_expect_success 'git sparse-checkout list (populated)' ' + test_when_finished rm -f repo/.git/info/sparse-checkout && + cat >repo/.git/info/sparse-checkout <<-\EOF && + /folder1/* + /deep/ + **/a + !*bin* + EOF + cp repo/.git/info/sparse-checkout expect && + git -C repo sparse-checkout list >list && + test_cmp expect list +' + +test_expect_success 'git sparse-checkout init' ' + git -C repo sparse-checkout init && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + test_cmp_config -C repo true core.sparsecheckout && + check_files repo a +' + +test_expect_success 'git sparse-checkout list after init' ' + git -C repo sparse-checkout list >actual && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect actual +' + +test_expect_success 'init with existing sparse-checkout' ' + echo "*folder*" >> repo/.git/info/sparse-checkout && + git -C repo sparse-checkout init && + cat >expect <<-\EOF && + /* + !/*/ + *folder* + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 folder2 +' + +test_expect_success 'clone --sparse' ' + git clone --sparse "file://$(pwd)/repo" clone && + git -C clone sparse-checkout list >actual && + cat >expect <<-\EOF && + /* + !/*/ + EOF + test_cmp expect actual && + check_files clone a +' + +test_expect_success 'set enables config' ' + git init empty-config && + ( + cd empty-config && + test_commit test file && + test_path_is_missing .git/config.worktree && + test_must_fail git sparse-checkout set nothing && + test_path_is_file .git/config.worktree && + test_must_fail git config core.sparseCheckout && + git sparse-checkout set "/*" && + test_cmp_config true core.sparseCheckout + ) +' + +test_expect_success 'set sparse-checkout using builtin' ' + git -C repo sparse-checkout set "/*" "!/*/" "*folder*" && + cat >expect <<-\EOF && + /* + !/*/ + *folder* + EOF + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 folder2 +' + +test_expect_success 'set sparse-checkout using --stdin' ' + cat >expect <<-\EOF && + /* + !/*/ + /folder1/ + /folder2/ + EOF + git -C repo sparse-checkout set --stdin <expect && + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo "a folder1 folder2" +' + +test_expect_success 'add to sparse-checkout' ' + cat repo/.git/info/sparse-checkout >expect && + cat >add <<-\EOF && + pattern1 + /folder1/ + pattern2 + EOF + cat add >>expect && + git -C repo sparse-checkout add --stdin <add && + git -C repo sparse-checkout list >actual && + test_cmp expect actual && + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo "a folder1 folder2" +' + +test_expect_success 'cone mode: match patterns' ' + git -C repo config --worktree core.sparseCheckoutCone true && + rm -rf repo/a repo/folder1 repo/folder2 && + git -C repo read-tree -mu HEAD 2>err && + test_i18ngrep ! "disabling cone patterns" err && + git -C repo reset --hard && + check_files repo a folder1 folder2 +' + +test_expect_success 'cone mode: warn on bad pattern' ' + test_when_finished mv sparse-checkout repo/.git/info/ && + cp repo/.git/info/sparse-checkout . && + echo "!/deep/deeper/*" >>repo/.git/info/sparse-checkout && + git -C repo read-tree -mu HEAD 2>err && + test_i18ngrep "unrecognized negative pattern" err +' + +test_expect_success 'sparse-checkout disable' ' + test_when_finished rm -rf repo/.git/info/sparse-checkout && + git -C repo sparse-checkout disable && + test_path_is_file repo/.git/info/sparse-checkout && + git -C repo config --list >config && + test_must_fail git config core.sparseCheckout && + check_files repo a deep folder1 folder2 +' + +test_expect_success 'cone mode: init and set' ' + git -C repo sparse-checkout init --cone && + git -C repo config --list >config && + test_i18ngrep "core.sparsecheckoutcone=true" config && + list_files repo >dir && + echo a >expect && + test_cmp expect dir && + git -C repo sparse-checkout set deep/deeper1/deepest/ 2>err && + test_must_be_empty err && + check_files repo a deep && + check_files repo/deep a deeper1 && + check_files repo/deep/deeper1 a deepest && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + !/deep/deeper1/*/ + /deep/deeper1/deepest/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + git -C repo sparse-checkout set --stdin 2>err <<-\EOF && + folder1 + folder2 + EOF + test_must_be_empty err && + check_files repo a folder1 folder2 +' + +test_expect_success 'cone mode: list' ' + cat >expect <<-\EOF && + folder1 + folder2 + EOF + git -C repo sparse-checkout set --stdin <expect && + git -C repo sparse-checkout list >actual 2>err && + test_must_be_empty err && + test_cmp expect actual +' + +test_expect_success 'cone mode: set with nested folders' ' + git -C repo sparse-checkout set deep deep/deeper1/deepest 2>err && + test_line_count = 0 err && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + EOF + test_cmp repo/.git/info/sparse-checkout expect +' + +test_expect_success 'cone mode: add independent path' ' + git -C repo sparse-checkout set deep/deeper1 && + git -C repo sparse-checkout add folder1 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep folder1 +' + +test_expect_success 'cone mode: add sibling path' ' + git -C repo sparse-checkout set deep/deeper1 && + git -C repo sparse-checkout add deep/deeper2 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + /deep/deeper2/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep +' + +test_expect_success 'cone mode: add parent path' ' + git -C repo sparse-checkout set deep/deeper1 folder1 && + git -C repo sparse-checkout add deep && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep folder1 +' + +test_expect_success 'revert to old sparse-checkout on bad update' ' + test_when_finished git -C repo reset --hard && + git -C repo sparse-checkout set deep && + echo update >repo/deep/deeper2/a && + cp repo/.git/info/sparse-checkout expect && + test_must_fail git -C repo sparse-checkout set deep/deeper1 2>err && + test_i18ngrep "cannot set sparse-checkout patterns" err && + test_cmp repo/.git/info/sparse-checkout expect && + check_files repo/deep a deeper1 deeper2 +' + +test_expect_success 'revert to old sparse-checkout on empty update' ' + git init empty-test && + ( + echo >file && + git add file && + git commit -m "test" && + test_must_fail git sparse-checkout set nothing 2>err && + test_i18ngrep "Sparse checkout leaves no entry on working directory" err && + test_i18ngrep ! ".git/index.lock" err && + git sparse-checkout set file + ) +' + +test_expect_success 'fail when lock is taken' ' + test_when_finished rm -rf repo/.git/info/sparse-checkout.lock && + touch repo/.git/info/sparse-checkout.lock && + test_must_fail git -C repo sparse-checkout set deep 2>err && + test_i18ngrep "File exists" err +' + +test_expect_success '.gitignore should not warn about cone mode' ' + git -C repo config --worktree core.sparseCheckoutCone true && + echo "**/bin/*" >repo/.gitignore && + git -C repo reset --hard 2>err && + test_i18ngrep ! "disabling cone patterns" err +' + +test_expect_success 'sparse-checkout (init|set|disable) fails with dirty status' ' + git clone repo dirty && + echo dirty >dirty/folder1/a && + test_must_fail git -C dirty sparse-checkout init && + test_must_fail git -C dirty sparse-checkout set /folder2/* /deep/deeper1/* && + test_must_fail git -C dirty sparse-checkout disable && + git -C dirty reset --hard && + git -C dirty sparse-checkout init && + git -C dirty sparse-checkout set /folder2/* /deep/deeper1/* && + git -C dirty sparse-checkout disable +' + +test_expect_success 'cone mode: set with core.ignoreCase=true' ' + git -C repo sparse-checkout init --cone && + git -C repo -c core.ignoreCase=true sparse-checkout set folder1 && + cat >expect <<-\EOF && + /* + !/*/ + /folder1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a folder1 +' + +test_expect_success 'interaction with submodules' ' + git clone repo super && + ( + cd super && + mkdir modules && + git submodule add ../repo modules/child && + git add . && + git commit -m "add submodule" && + git sparse-checkout init --cone && + git sparse-checkout set folder1 + ) && + check_files super a folder1 modules && + check_files super/modules/child a deep folder1 folder2 +' + +test_expect_success 'different sparse-checkouts with worktrees' ' + git -C repo worktree add --detach ../worktree && + check_files worktree "a deep folder1 folder2" && + git -C worktree sparse-checkout init --cone && + git -C repo sparse-checkout set folder1 && + git -C worktree sparse-checkout set deep/deeper1 && + check_files repo a folder1 && + check_files worktree a deep +' + +test_expect_success 'set using filename keeps file on-disk' ' + git -C repo sparse-checkout set a deep && + cat >expect <<-\EOF && + /* + !/*/ + /a/ + /deep/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep +' + +check_read_tree_errors () { + REPO=$1 + FILES=$2 + ERRORS=$3 + git -C $REPO -c core.sparseCheckoutCone=false read-tree -mu HEAD 2>err && + test_must_be_empty err && + check_files $REPO "$FILES" && + git -C $REPO read-tree -mu HEAD 2>err && + if test -z "$ERRORS" + then + test_must_be_empty err + else + test_i18ngrep "$ERRORS" err + fi && + check_files $REPO $FILES +} + +test_expect_success 'pattern-checks: /A/**' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /folder1/** + EOF + check_read_tree_errors repo "a folder1" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: /A/**/B/' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /deep/**/deepest + EOF + check_read_tree_errors repo "a deep" "disabling cone pattern matching" && + check_files repo/deep "deeper1" && + check_files repo/deep/deeper1 "deepest" +' + +test_expect_success 'pattern-checks: too short' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + / + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" +' +test_expect_success 'pattern-checks: not too short' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /b/ + EOF + git -C repo read-tree -mu HEAD 2>err && + test_must_be_empty err && + check_files repo a +' + +test_expect_success 'pattern-checks: trailing "*"' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + /a* + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: starting "*"' ' + cat >repo/.git/info/sparse-checkout <<-\EOF && + /* + !/*/ + *eep/ + EOF + check_read_tree_errors repo "a deep" "disabling cone pattern matching" +' + +test_expect_success 'pattern-checks: contained glob characters' ' + for c in "[a]" "\\" "?" "*" + do + cat >repo/.git/info/sparse-checkout <<-EOF && + /* + !/*/ + something$c-else/ + EOF + check_read_tree_errors repo "a" "disabling cone pattern matching" + done +' + +test_expect_success BSLASHPSPEC 'pattern-checks: escaped characters' ' + git clone repo escaped && + TREEOID=$(git -C escaped rev-parse HEAD:folder1) && + NEWTREE=$(git -C escaped mktree <<-EOF + $(git -C escaped ls-tree HEAD) + 040000 tree $TREEOID zbad\\dir + 040000 tree $TREEOID zdoes*exist + 040000 tree $TREEOID zglob[!a]? + EOF + ) && + COMMIT=$(git -C escaped commit-tree $NEWTREE -p HEAD) && + git -C escaped reset --hard $COMMIT && + check_files escaped "a deep folder1 folder2 zbad\\dir zdoes*exist" zglob[!a]? && + git -C escaped sparse-checkout init --cone && + git -C escaped sparse-checkout set zbad\\dir/bogus "zdoes*not*exist" "zdoes*exist" "zglob[!a]?" && + cat >expect <<-\EOF && + /* + !/*/ + /zbad\\dir/ + !/zbad\\dir/*/ + /zbad\\dir/bogus/ + /zdoes\*exist/ + /zdoes\*not\*exist/ + /zglob\[!a]\?/ + EOF + test_cmp expect escaped/.git/info/sparse-checkout && + check_read_tree_errors escaped "a zbad\\dir zdoes*exist zglob[!a]?" && + git -C escaped ls-tree -d --name-only HEAD >list-expect && + git -C escaped sparse-checkout set --stdin <list-expect && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + /folder1/ + /folder2/ + /zbad\\dir/ + /zdoes\*exist/ + /zglob\[!a]\?/ + EOF + test_cmp expect escaped/.git/info/sparse-checkout && + check_files escaped "a deep folder1 folder2 zbad\\dir zdoes*exist" zglob[!a]? && + git -C escaped sparse-checkout list >list-actual && + test_cmp list-expect list-actual +' + +test_expect_success MINGW 'cone mode replaces backslashes with slashes' ' + git -C repo sparse-checkout set deep\\deeper1 && + cat >expect <<-\EOF && + /* + !/*/ + /deep/ + !/deep/*/ + /deep/deeper1/ + EOF + test_cmp expect repo/.git/info/sparse-checkout && + check_files repo a deep && + check_files repo/deep a deeper1 +' + +test_done diff --git a/t/t1300-config.sh b/t/t1300-config.sh index 9652b24..97ebfe1 100755 --- a/t/t1300-config.sh +++ b/t/t1300-config.sh @@ -892,6 +892,7 @@ test_expect_success 'get --expiry-date' ' 1510348087 0 EOF + : "work around heredoc parsing bug fixed in dash 0.5.7 (in ec2c84d)" && { echo "$rel_out $(git config --expiry-date date.valid1)" git config --expiry-date date.valid2 && @@ -1190,47 +1191,47 @@ test_expect_success 'old-fashioned settings are case insensitive' ' test_when_finished "rm -f testConfig testConfig_expect testConfig_actual" && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - Qr = value2 + [V.A] + Qr = value2 EOF git config -f testConfig_actual "v.a.r" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - QR = value2 + [V.A] + QR = value2 EOF git config -f testConfig_actual "V.a.R" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - r = value1 - Qr = value2 + [V.A] + r = value1 + Qr = value2 EOF git config -f testConfig_actual "V.A.r" value2 && test_cmp testConfig_expect testConfig_actual && cat >testConfig_actual <<-EOF && - [V.A] - r = value1 + [V.A] + r = value1 EOF q_to_tab >testConfig_expect <<-EOF && - [V.A] - r = value1 - Qr = value2 + [V.A] + r = value1 + Qr = value2 EOF git config -f testConfig_actual "v.A.r" value2 && test_cmp testConfig_expect testConfig_actual @@ -1240,26 +1241,26 @@ test_expect_success 'setting different case sensitive subsections ' ' test_when_finished "rm -f testConfig testConfig_expect testConfig_actual" && cat >testConfig_actual <<-EOF && - [V "A"] - R = v1 - [K "E"] - Y = v1 - [a "b"] - c = v1 - [d "e"] - f = v1 + [V "A"] + R = v1 + [K "E"] + Y = v1 + [a "b"] + c = v1 + [d "e"] + f = v1 EOF q_to_tab >testConfig_expect <<-EOF && - [V "A"] - Qr = v2 - [K "E"] - Qy = v2 - [a "b"] - Qc = v2 - [d "e"] - f = v1 - [d "E"] - Qf = v2 + [V "A"] + Qr = v2 + [K "E"] + Qy = v2 + [a "b"] + Qc = v2 + [d "e"] + f = v1 + [d "E"] + Qf = v2 EOF # exact match git config -f testConfig_actual a.b.c v2 && @@ -1293,26 +1294,25 @@ test_expect_success 'git -c is not confused by empty environment' ' GIT_CONFIG_PARAMETERS="" git -c x.one=1 config --list ' -sq="'" test_expect_success 'detect bogus GIT_CONFIG_PARAMETERS' ' cat >expect <<-\EOF && env.one one env.two two EOF - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq} ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ} ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" >actual && test_cmp expect actual && cat >expect <<-EOF && - env.one one${sq} + env.one one${SQ} env.two two EOF - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq$sq$sq ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ}\\$SQ$SQ$SQ ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" >actual && test_cmp expect actual && test_must_fail env \ - GIT_CONFIG_PARAMETERS="${sq}env.one=one${sq}\\$sq ${sq}env.two=two${sq}" \ + GIT_CONFIG_PARAMETERS="${SQ}env.one=one${SQ}\\$SQ ${SQ}env.two=two${SQ}" \ git config --get-regexp "env.*" ' @@ -1408,6 +1408,8 @@ test_expect_success 'urlmatch favors more specific URLs' ' cookieFile = /tmp/wildcard.txt [http "https://*.example.com/wildcardwithsubdomain"] cookieFile = /tmp/wildcardwithsubdomain.txt + [http "https://*.example.*"] + cookieFile = /tmp/multiwildcard.txt [http "https://trailing.example.com"] cookieFile = /tmp/trailing.txt [http "https://user@*.example.com/"] @@ -1454,6 +1456,10 @@ test_expect_success 'urlmatch favors more specific URLs' ' echo http.cookiefile /tmp/sub.txt >expect && git config --get-urlmatch HTTP https://user@sub.example.com >actual && + test_cmp expect actual && + + echo http.cookiefile /tmp/multiwildcard.txt >expect && + git config --get-urlmatch HTTP https://wildcard.example.org >actual && test_cmp expect actual ' @@ -1622,40 +1628,40 @@ test_expect_success 'set up --show-origin tests' ' INCLUDE_DIR="$HOME/include" && mkdir -p "$INCLUDE_DIR" && cat >"$INCLUDE_DIR"/absolute.include <<-\EOF && - [user] - absolute = include + [user] + absolute = include EOF cat >"$INCLUDE_DIR"/relative.include <<-\EOF && - [user] - relative = include + [user] + relative = include EOF cat >"$HOME"/.gitconfig <<-EOF && - [user] - global = true - override = global - [include] - path = "$INCLUDE_DIR/absolute.include" + [user] + global = true + override = global + [include] + path = "$INCLUDE_DIR/absolute.include" EOF cat >.git/config <<-\EOF - [user] - local = true - override = local - [include] - path = ../include/relative.include + [user] + local = true + override = local + [include] + path = ../include/relative.include EOF ' test_expect_success '--show-origin with --list' ' cat >expect <<-EOF && - file:$HOME/.gitconfig user.global=true - file:$HOME/.gitconfig user.override=global - file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include - file:$INCLUDE_DIR/absolute.include user.absolute=include - file:.git/config user.local=true - file:.git/config user.override=local - file:.git/config include.path=../include/relative.include - file:.git/../include/relative.include user.relative=include - command line: user.cmdline=true + file:$HOME/.gitconfig user.global=true + file:$HOME/.gitconfig user.override=global + file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include + file:$INCLUDE_DIR/absolute.include user.absolute=include + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include + file:.git/../include/relative.include user.relative=include + command line: user.cmdline=true EOF git -c user.cmdline=true config --list --show-origin >output && test_cmp expect output @@ -1663,16 +1669,16 @@ test_expect_success '--show-origin with --list' ' test_expect_success '--show-origin with --list --null' ' cat >expect <<-EOF && - file:$HOME/.gitconfigQuser.global - trueQfile:$HOME/.gitconfigQuser.override - globalQfile:$HOME/.gitconfigQinclude.path - $INCLUDE_DIR/absolute.includeQfile:$INCLUDE_DIR/absolute.includeQuser.absolute - includeQfile:.git/configQuser.local - trueQfile:.git/configQuser.override - localQfile:.git/configQinclude.path - ../include/relative.includeQfile:.git/../include/relative.includeQuser.relative - includeQcommand line:Quser.cmdline - trueQ + file:$HOME/.gitconfigQuser.global + trueQfile:$HOME/.gitconfigQuser.override + globalQfile:$HOME/.gitconfigQinclude.path + $INCLUDE_DIR/absolute.includeQfile:$INCLUDE_DIR/absolute.includeQuser.absolute + includeQfile:.git/configQuser.local + trueQfile:.git/configQuser.override + localQfile:.git/configQinclude.path + ../include/relative.includeQfile:.git/../include/relative.includeQuser.relative + includeQcommand line:Quser.cmdline + trueQ EOF git -c user.cmdline=true config --null --list --show-origin >output.raw && nul_to_q <output.raw >output && @@ -1684,9 +1690,9 @@ test_expect_success '--show-origin with --list --null' ' test_expect_success '--show-origin with single file' ' cat >expect <<-\EOF && - file:.git/config user.local=true - file:.git/config user.override=local - file:.git/config include.path=../include/relative.include + file:.git/config user.local=true + file:.git/config user.override=local + file:.git/config include.path=../include/relative.include EOF git config --local --list --show-origin >output && test_cmp expect output @@ -1694,8 +1700,8 @@ test_expect_success '--show-origin with single file' ' test_expect_success '--show-origin with --get-regexp' ' cat >expect <<-EOF && - file:$HOME/.gitconfig user.global true - file:.git/config user.local true + file:$HOME/.gitconfig user.global true + file:.git/config user.local true EOF git config --show-origin --get-regexp "user\.[g|l].*" >output && test_cmp expect output @@ -1703,31 +1709,36 @@ test_expect_success '--show-origin with --get-regexp' ' test_expect_success '--show-origin getting a single key' ' cat >expect <<-\EOF && - file:.git/config local + file:.git/config local EOF git config --show-origin user.override >output && test_cmp expect output ' test_expect_success 'set up custom config file' ' - CUSTOM_CONFIG_FILE="file\" (dq) and spaces.conf" && + CUSTOM_CONFIG_FILE="custom.conf" && cat >"$CUSTOM_CONFIG_FILE" <<-\EOF - [user] - custom = true + [user] + custom = true EOF ' +test_expect_success !MINGW 'set up custom config file with special name characters' ' + WEIRDLY_NAMED_FILE="file\" (dq) and spaces.conf" && + cp "$CUSTOM_CONFIG_FILE" "$WEIRDLY_NAMED_FILE" +' + test_expect_success !MINGW '--show-origin escape special file name characters' ' cat >expect <<-\EOF && - file:"file\" (dq) and spaces.conf" user.custom=true + file:"file\" (dq) and spaces.conf" user.custom=true EOF - git config --file "$CUSTOM_CONFIG_FILE" --show-origin --list >output && + git config --file "$WEIRDLY_NAMED_FILE" --show-origin --list >output && test_cmp expect output ' test_expect_success '--show-origin stdin' ' cat >expect <<-\EOF && - standard input: user.custom=true + standard input: user.custom=true EOF git config --file - --show-origin --list <"$CUSTOM_CONFIG_FILE" >output && test_cmp expect output @@ -1735,11 +1746,11 @@ test_expect_success '--show-origin stdin' ' test_expect_success '--show-origin stdin with file include' ' cat >"$INCLUDE_DIR"/stdin.include <<-EOF && - [user] - stdin = include + [user] + stdin = include EOF cat >expect <<-EOF && - file:$INCLUDE_DIR/stdin.include include + file:$INCLUDE_DIR/stdin.include include EOF echo "[include]path=\"$INCLUDE_DIR\"/stdin.include" | git config --show-origin --includes --file - user.stdin >output && @@ -1747,18 +1758,18 @@ test_expect_success '--show-origin stdin with file include' ' test_cmp expect output ' -test_expect_success !MINGW '--show-origin blob' ' +test_expect_success '--show-origin blob' ' blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && cat >expect <<-EOF && - blob:$blob user.custom=true + blob:$blob user.custom=true EOF git config --blob=$blob --show-origin --list >output && test_cmp expect output ' -test_expect_success !MINGW '--show-origin blob ref' ' +test_expect_success '--show-origin blob ref' ' cat >expect <<-\EOF && - blob:"master:file\" (dq) and spaces.conf" user.custom=true + blob:master:custom.conf user.custom=true EOF git add "$CUSTOM_CONFIG_FILE" && git commit -m "new config file" && @@ -1766,6 +1777,65 @@ test_expect_success !MINGW '--show-origin blob ref' ' test_cmp expect output ' +test_expect_success '--show-scope with --list' ' + cat >expect <<-EOF && + global user.global=true + global user.override=global + global include.path=$INCLUDE_DIR/absolute.include + global user.absolute=include + local user.local=true + local user.override=local + local include.path=../include/relative.include + local user.relative=include + command user.cmdline=true + EOF + git -c user.cmdline=true config --list --show-scope >output && + test_cmp expect output +' + +test_expect_success !MINGW '--show-scope with --blob' ' + blob=$(git hash-object -w "$CUSTOM_CONFIG_FILE") && + cat >expect <<-EOF && + command user.custom=true + EOF + git config --blob=$blob --show-scope --list >output && + test_cmp expect output +' + +test_expect_success '--show-scope with --local' ' + cat >expect <<-\EOF && + local user.local=true + local user.override=local + local include.path=../include/relative.include + EOF + git config --local --list --show-scope >output && + test_cmp expect output +' + +test_expect_success '--show-scope getting a single value' ' + cat >expect <<-\EOF && + local true + EOF + git config --show-scope --get user.local >output && + test_cmp expect output +' + +test_expect_success '--show-scope with --show-origin' ' + cat >expect <<-EOF && + global file:$HOME/.gitconfig user.global=true + global file:$HOME/.gitconfig user.override=global + global file:$HOME/.gitconfig include.path=$INCLUDE_DIR/absolute.include + global file:$INCLUDE_DIR/absolute.include user.absolute=include + local file:.git/config user.local=true + local file:.git/config user.override=local + local file:.git/config include.path=../include/relative.include + local file:.git/../include/relative.include user.relative=include + command command line: user.cmdline=true + EOF + git -c user.cmdline=true config --list --show-origin --show-scope >output && + test_cmp expect output +' + test_expect_success '--local requires a repo' ' # we expect 128 to ensure that we do not simply # fail to find anything and return code "1" diff --git a/t/t1301-shared-repo.sh b/t/t1301-shared-repo.sh index dfece75..2dc853d 100755 --- a/t/t1301-shared-repo.sh +++ b/t/t1301-shared-repo.sh @@ -136,7 +136,7 @@ test_expect_success POSIXPERM 'forced modes' ' ( cd new && umask 002 && - git init --shared=0660 --template=../templates && + git init --shared=0660 --template=templates && >frotz && git add frotz && git commit -a -m initial && @@ -192,7 +192,7 @@ test_expect_success POSIXPERM 're-init respects core.sharedrepository (remote)' umask 0022 && git init --bare --shared=0666 child.git && test_path_is_missing child.git/foo && - git init --bare --template=../templates child.git && + git init --bare --template=templates child.git && echo "-rw-rw-rw-" >expect && test_modebits child.git/foo >actual && test_cmp expect actual @@ -203,7 +203,7 @@ test_expect_success POSIXPERM 'template can set core.sharedrepository' ' umask 0022 && git config core.sharedrepository 0666 && cp .git/config templates/config && - git init --bare --template=../templates child.git && + git init --bare --template=templates child.git && echo "-rw-rw-rw-" >expect && test_modebits child.git/HEAD >actual && test_cmp expect actual diff --git a/t/t1305-config-include.sh b/t/t1305-config-include.sh index 6359185..f1e1b28 100755 --- a/t/t1305-config-include.sh +++ b/t/t1305-config-include.sh @@ -63,7 +63,7 @@ test_expect_success 'listing includes option and expansion' ' test.one=1 EOF git config --list >actual.full && - grep -v ^core actual.full >actual && + grep -v -e ^core -e ^extensions actual.full >actual && test_cmp expect actual ' @@ -229,6 +229,19 @@ test_expect_success 'conditional include, early config reading' ' ) ' +test_expect_success 'conditional include with /**/' ' + REPO=foo/bar/repo && + git init $REPO && + cat >>$REPO/.git/config <<-\EOF && + [includeIf "gitdir:**/foo/**/bar/**"] + path=bar7 + EOF + echo "[test]seven=7" >$REPO/.git/bar7 && + echo 7 >expect && + git -C $REPO config test.seven >actual && + test_cmp expect actual +' + test_expect_success SYMLINKS 'conditional include, set up symlinked $HOME' ' mkdir real-home && ln -s real-home home && @@ -296,21 +309,53 @@ test_expect_success SYMLINKS 'conditional include, gitdir matching symlink, icas ) ' +test_expect_success 'conditional include, onbranch' ' + echo "[includeIf \"onbranch:foo-branch\"]path=bar9" >>.git/config && + echo "[test]nine=9" >.git/bar9 && + git checkout -b master && + test_must_fail git config test.nine && + git checkout -b foo-branch && + echo 9 >expect && + git config test.nine >actual && + test_cmp expect actual +' + +test_expect_success 'conditional include, onbranch, wildcard' ' + echo "[includeIf \"onbranch:?oo-*/**\"]path=bar10" >>.git/config && + echo "[test]ten=10" >.git/bar10 && + git checkout -b not-foo-branch/a && + test_must_fail git config test.ten && + + echo 10 >expect && + git checkout -b foo-branch/a/b/c && + git config test.ten >actual && + test_cmp expect actual && + + git checkout -b moo-bar/a && + git config test.ten >actual && + test_cmp expect actual +' + +test_expect_success 'conditional include, onbranch, implicit /** for /' ' + echo "[includeIf \"onbranch:foo-dir/\"]path=bar11" >>.git/config && + echo "[test]eleven=11" >.git/bar11 && + git checkout -b not-foo-dir/a && + test_must_fail git config test.eleven && + + echo 11 >expect && + git checkout -b foo-dir/a/b/c && + git config test.eleven >actual && + test_cmp expect actual +' + test_expect_success 'include cycles are detected' ' - cat >.gitconfig <<-\EOF && - [test]value = gitconfig - [include]path = cycle - EOF - cat >cycle <<-\EOF && - [test]value = cycle - [include]path = .gitconfig - EOF - cat >expect <<-\EOF && - gitconfig - cycle - EOF - test_must_fail git config --get-all test.value 2>stderr && - test_i18ngrep "exceeded maximum include depth" stderr + git init --bare cycle && + git -C cycle config include.path cycle && + git config -f cycle/cycle include.path config && + test_must_fail \ + env GIT_TEST_GETTEXT_POISON=false \ + git -C cycle config --get-all test.value 2>stderr && + grep "exceeded maximum include depth" stderr ' test_done diff --git a/t/t1306-xdg-files.sh b/t/t1306-xdg-files.sh index 21e139a..dd87b43 100755 --- a/t/t1306-xdg-files.sh +++ b/t/t1306-xdg-files.sh @@ -153,7 +153,7 @@ test_expect_success 'Checking attributes in both XDG and local attributes files' test_expect_success 'Checking attributes in a non-XDG global attributes file' ' - test_might_fail rm .gitattributes && + rm -f .gitattributes && echo "f attr_f=test" >"$HOME"/my_gitattributes && git config core.attributesfile "$HOME"/my_gitattributes && echo "f: attr_f: test" >expected && @@ -165,7 +165,7 @@ test_expect_success 'Checking attributes in a non-XDG global attributes file' ' test_expect_success 'write: xdg file exists and ~/.gitconfig doesn'\''t' ' mkdir -p "$HOME"/.config/git && >"$HOME"/.config/git/config && - test_might_fail rm "$HOME"/.gitconfig && + rm -f "$HOME"/.gitconfig && git config --global user.name "write_config" && echo "[user]" >expected && echo " name = write_config" >>expected && @@ -183,8 +183,8 @@ test_expect_success 'write: xdg file exists and ~/.gitconfig exists' ' test_expect_success 'write: ~/.config/git/ exists and config file doesn'\''t' ' - test_might_fail rm "$HOME"/.gitconfig && - test_might_fail rm "$HOME"/.config/git/config && + rm -f "$HOME"/.gitconfig && + rm -f "$HOME"/.config/git/config && git config --global user.name "write_gitconfig" && echo "[user]" >expected && echo " name = write_gitconfig" >>expected && diff --git a/t/t1307-config-blob.sh b/t/t1307-config-blob.sh index 37dc689..002e6d3 100755 --- a/t/t1307-config-blob.sh +++ b/t/t1307-config-blob.sh @@ -74,7 +74,7 @@ test_expect_success 'can parse blob ending with CR' ' ' test_expect_success 'config --blob outside of a repository is an error' ' - test_must_fail nongit git config --blob=foo --list + nongit test_must_fail git config --blob=foo --list ' test_done diff --git a/t/t1308-config-set.sh b/t/t1308-config-set.sh index d0a2727..3a527e3 100755 --- a/t/t1308-config-set.sh +++ b/t/t1308-config-set.sh @@ -166,14 +166,14 @@ test_expect_success 'find value with highest priority from a configset' ' ' test_expect_success 'find value_list for a key from a configset' ' - cat >except <<-\EOF && + cat >expect <<-\EOF && + lama + ball sam bat hask - lama - ball EOF - test-tool config configset_get_value case.baz config2 .git/config >actual && + test-tool config configset_get_value_multi case.baz config2 .git/config >actual && test_cmp expect actual ' @@ -238,8 +238,8 @@ test_expect_success 'error on modifying repo config without repo' ' cmdline_config="'foo.bar=from-cmdline'" test_expect_success 'iteration shows correct origins' ' - echo "[foo]bar = from-repo" >.git/config && - echo "[foo]bar = from-home" >.gitconfig && + printf "[ignore]\n\tthis = please\n[foo]bar = from-repo\n" >.git/config && + printf "[foo]\n\tbar = from-home\n" >.gitconfig && if test_have_prereq MINGW then # Use Windows path (i.e. *not* $HOME) @@ -253,19 +253,29 @@ test_expect_success 'iteration shows correct origins' ' value=from-home origin=file name=$HOME_GITCONFIG + lno=2 scope=global + key=ignore.this + value=please + origin=file + name=.git/config + lno=2 + scope=local + key=foo.bar value=from-repo origin=file name=.git/config - scope=repo + lno=3 + scope=local key=foo.bar value=from-cmdline origin=command line name= - scope=cmdline + lno=-1 + scope=command EOF GIT_CONFIG_PARAMETERS=$cmdline_config test-tool config iterate >actual && test_cmp expect actual diff --git a/t/t1309-early-config.sh b/t/t1309-early-config.sh index 413642a..ebb8e1a 100755 --- a/t/t1309-early-config.sh +++ b/t/t1309-early-config.sh @@ -29,7 +29,7 @@ test_expect_success 'ceiling' ' cd sub && test-tool config read_early_config early.config ) >output && - test -z "$(cat output)" + test_must_be_empty output ' test_expect_success 'ceiling #2' ' @@ -89,4 +89,14 @@ test_expect_failure 'ignore .git/ with invalid config' ' test_with_config "[" ' +test_expect_success 'early config and onbranch' ' + echo "[broken" >broken && + test_with_config "[includeif \"onbranch:master\"]path=../broken" +' + +test_expect_success 'onbranch config outside of git repo' ' + test_config_global includeIf.onbranch:master.path non-existent && + nongit git help +' + test_done diff --git a/t/t1400-update-ref.sh b/t/t1400-update-ref.sh index 1fbd940..a6224ef 100755 --- a/t/t1400-update-ref.sh +++ b/t/t1400-update-ref.sh @@ -344,14 +344,16 @@ test_expect_success "verifying $m's log (logged by config)" ' test_cmp expect .git/logs/$m ' -git update-ref $m $D -cat >.git/logs/$m <<EOF -$Z $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 -$C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150350 -0500 -$A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500 -$F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500 -$Z $E $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 -0500 -EOF +test_expect_success 'set up for querying the reflog' ' + git update-ref $m $D && + cat >.git/logs/$m <<-EOF + $Z $C $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500 + $C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150350 -0500 + $A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500 + $F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500 + $Z $E $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 -0500 + EOF +' ed="Thu, 26 May 2005 18:32:00 -0500" gd="Thu, 26 May 2005 18:33:00 -0500" @@ -359,55 +361,67 @@ ld="Thu, 26 May 2005 18:43:00 -0500" test_expect_success 'Query "master@{May 25 2005}" (before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 25 2005}" >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query master@{2005-05-25} (before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify master@{2005-05-25} >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query "master@{May 26 2005 23:31:59}" (1 second before history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e && - test $C = $(cat o) && - test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + echo "warning: log for '\''master'\'' only goes back to $ed" >expect && + test_i18ncmp expect e ' test_expect_success 'Query "master@{May 26 2005 23:32:00}" (exactly history start)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e && - test $C = $(cat o) && - test "" = "$(cat e)" + echo "$C" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{May 26 2005 23:32:30}" (first non-creation change)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{May 26 2005 23:32:30}" >o 2>e && - test $A = $(cat o) && - test "" = "$(cat e)" + echo "$A" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e && - test $B = $(cat o) && + echo "$B" >expect && + test_cmp expect o && test_i18ngrep -F "warning: log for ref $m has gap after $gd" e ' test_expect_success 'Query "master@{2005-05-26 23:38:00}" (middle of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e && - test $Z = $(cat o) && - test "" = "$(cat e)" + echo "$Z" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-26 23:43:00}" (exact end of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e && - test $E = $(cat o) && - test "" = "$(cat e)" + echo "$E" >expect && + test_cmp expect o && + test_must_be_empty e ' test_expect_success 'Query "master@{2005-05-28}" (past end of history)' ' test_when_finished "rm -f o e" && git rev-parse --verify "master@{2005-05-28}" >o 2>e && - test $D = $(cat o) && + echo "$D" >expect && + test_cmp expect o && test_i18ngrep -F "warning: log for ref $m unexpectedly ended on $ld" e ' diff --git a/t/t1404-update-ref-errors.sh b/t/t1404-update-ref-errors.sh index 51a4f4c..2d142e5 100755 --- a/t/t1404-update-ref-errors.sh +++ b/t/t1404-update-ref-errors.sh @@ -32,8 +32,6 @@ test_update_rejected () { test_cmp unchanged actual } -Q="'" - # Test adding and deleting D/F-conflicting references in a single # transaction. df_test() { @@ -93,7 +91,7 @@ df_test() { delname="$delref" fi && cat >expected-err <<-EOF && - fatal: cannot lock ref $Q$addname$Q: $Q$delref$Q exists; cannot create $Q$addref$Q + fatal: cannot lock ref $SQ$addname$SQ: $SQ$delref$SQ exists; cannot create $SQ$addref$SQ EOF $pack && if $add_del @@ -123,7 +121,7 @@ test_expect_success 'existing loose ref is a simple prefix of new' ' prefix=refs/1l && test_update_rejected "a c e" false "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x$SQ" ' @@ -131,7 +129,7 @@ test_expect_success 'existing packed ref is a simple prefix of new' ' prefix=refs/1p && test_update_rejected "a c e" true "b c/x d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x$SQ" ' @@ -139,7 +137,7 @@ test_expect_success 'existing loose ref is a deeper prefix of new' ' prefix=refs/2l && test_update_rejected "a c e" false "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x/y$SQ" ' @@ -147,7 +145,7 @@ test_expect_success 'existing packed ref is a deeper prefix of new' ' prefix=refs/2p && test_update_rejected "a c e" true "b c/x/y d" \ - "$Q$prefix/c$Q exists; cannot create $Q$prefix/c/x/y$Q" + "$SQ$prefix/c$SQ exists; cannot create $SQ$prefix/c/x/y$SQ" ' @@ -155,7 +153,7 @@ test_expect_success 'new ref is a simple prefix of existing loose' ' prefix=refs/3l && test_update_rejected "a c/x e" false "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -163,7 +161,7 @@ test_expect_success 'new ref is a simple prefix of existing packed' ' prefix=refs/3p && test_update_rejected "a c/x e" true "b c d" \ - "$Q$prefix/c/x$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -171,7 +169,7 @@ test_expect_success 'new ref is a deeper prefix of existing loose' ' prefix=refs/4l && test_update_rejected "a c/x/y e" false "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x/y$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -179,7 +177,7 @@ test_expect_success 'new ref is a deeper prefix of existing packed' ' prefix=refs/4p && test_update_rejected "a c/x/y e" true "b c d" \ - "$Q$prefix/c/x/y$Q exists; cannot create $Q$prefix/c$Q" + "$SQ$prefix/c/x/y$SQ exists; cannot create $SQ$prefix/c$SQ" ' @@ -187,7 +185,7 @@ test_expect_success 'one new ref is a simple prefix of another' ' prefix=refs/5 && test_update_rejected "a e" false "b c c/x d" \ - "cannot process $Q$prefix/c$Q and $Q$prefix/c/x$Q at the same time" + "cannot process $SQ$prefix/c$SQ and $SQ$prefix/c/x$SQ at the same time" ' @@ -334,7 +332,7 @@ test_expect_success 'D/F conflict prevents indirect delete long packed + indirec test_expect_success 'missing old value blocks update' ' prefix=refs/missing-update && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -345,7 +343,7 @@ test_expect_success 'incorrect old value blocks update' ' prefix=refs/incorrect-update && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/foo$SQ: is at $C but expected $D EOF printf "%s\n" "update $prefix/foo $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -356,7 +354,7 @@ test_expect_success 'existing old value blocks create' ' prefix=refs/existing-create && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/foo$SQ: reference already exists EOF printf "%s\n" "create $prefix/foo $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -367,7 +365,7 @@ test_expect_success 'incorrect old value blocks delete' ' prefix=refs/incorrect-delete && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/foo$SQ: is at $C but expected $D EOF printf "%s\n" "delete $prefix/foo $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -378,7 +376,7 @@ test_expect_success 'missing old value blocks indirect update' ' prefix=refs/missing-indirect-update && git symbolic-ref $prefix/symref $prefix/foo && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -390,7 +388,7 @@ test_expect_success 'incorrect old value blocks indirect update' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -402,7 +400,7 @@ test_expect_success 'existing old value blocks indirect create' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference already exists EOF printf "%s\n" "create $prefix/symref $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -414,7 +412,7 @@ test_expect_success 'incorrect old value blocks indirect delete' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "delete $prefix/symref $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -425,7 +423,7 @@ test_expect_success 'missing old value blocks indirect no-deref update' ' prefix=refs/missing-noderef-update && git symbolic-ref $prefix/symref $prefix/foo && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference is missing but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference is missing but expected $D EOF printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -437,7 +435,7 @@ test_expect_success 'incorrect old value blocks indirect no-deref update' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "option no-deref" "update $prefix/symref $E $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -449,7 +447,7 @@ test_expect_success 'existing old value blocks indirect no-deref create' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: reference already exists + fatal: cannot lock ref $SQ$prefix/symref$SQ: reference already exists EOF printf "%s\n" "option no-deref" "create $prefix/symref $E" | test_must_fail git update-ref --stdin 2>output.err && @@ -461,7 +459,7 @@ test_expect_success 'incorrect old value blocks indirect no-deref delete' ' git symbolic-ref $prefix/symref $prefix/foo && git update-ref $prefix/foo $C && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: is at $C but expected $D + fatal: cannot lock ref $SQ$prefix/symref$SQ: is at $C but expected $D EOF printf "%s\n" "option no-deref" "delete $prefix/symref $D" | test_must_fail git update-ref --stdin 2>output.err && @@ -474,13 +472,13 @@ test_expect_success 'non-empty directory blocks create' ' : >.git/$prefix/foo/bar/baz.lock && test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: there is a non-empty directory $SQ.git/$prefix/foo$SQ blocking reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/foo $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -493,13 +491,13 @@ test_expect_success 'broken reference blocks create' ' echo "gobbledigook" >.git/$prefix/foo && test_when_finished "rm -f .git/$prefix/foo" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/foo $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/foo$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/foo$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/foo $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -513,13 +511,13 @@ test_expect_success 'non-empty directory blocks indirect create' ' : >.git/$prefix/foo/bar/baz.lock && test_when_finished "rm -f .git/$prefix/foo/bar/baz.lock" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: there is a non-empty directory $Q.git/$prefix/foo$Q blocking reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: there is a non-empty directory $SQ.git/$prefix/foo$SQ blocking reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ EOF printf "%s\n" "update $prefix/symref $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -532,13 +530,13 @@ test_expect_success 'broken reference blocks indirect create' ' echo "gobbledigook" >.git/$prefix/foo && test_when_finished "rm -f .git/$prefix/foo" && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/symref $C" | test_must_fail git update-ref --stdin 2>output.err && test_cmp expected output.err && cat >expected <<-EOF && - fatal: cannot lock ref $Q$prefix/symref$Q: unable to resolve reference $Q$prefix/foo$Q: reference broken + fatal: cannot lock ref $SQ$prefix/symref$SQ: unable to resolve reference $SQ$prefix/foo$SQ: reference broken EOF printf "%s\n" "update $prefix/symref $D $C" | test_must_fail git update-ref --stdin 2>output.err && @@ -614,7 +612,23 @@ test_expect_success 'delete fails cleanly if packed-refs file is locked' ' test_when_finished "rm -f .git/packed-refs.lock" && test_must_fail git update-ref -d $prefix/foo >out 2>err && git for-each-ref $prefix >actual && - test_i18ngrep "Unable to create $Q.*packed-refs.lock$Q: File exists" err && + test_i18ngrep "Unable to create $SQ.*packed-refs.lock$SQ: " err && + test_cmp unchanged actual +' + +test_expect_success 'delete fails cleanly if packed-refs.new write fails' ' + # Setup and expectations are similar to the test above. + prefix=refs/failed-packed-refs && + git update-ref $prefix/foo $C && + git pack-refs --all && + git update-ref $prefix/foo $D && + git for-each-ref $prefix >unchanged && + # This should not happen in practice, but it is an easy way to get a + # reliable error (we open with create_tempfile(), which uses O_EXCL). + : >.git/packed-refs.new && + test_when_finished "rm -f .git/packed-refs.new" && + test_must_fail git update-ref -d $prefix/foo && + git for-each-ref $prefix >actual && test_cmp unchanged actual ' diff --git a/t/t1406-submodule-ref-store.sh b/t/t1406-submodule-ref-store.sh index d199d87..36b7ef5 100755 --- a/t/t1406-submodule-ref-store.sh +++ b/t/t1406-submodule-ref-store.sh @@ -75,7 +75,7 @@ test_expect_success 'for_each_reflog()' ' ' test_expect_success 'for_each_reflog_ent()' ' - $RUN for-each-reflog-ent HEAD >actual && cat actual && + $RUN for-each-reflog-ent HEAD >actual && head -n1 actual | grep first && tail -n2 actual | head -n1 | grep master.to.new ' diff --git a/t/t1409-avoid-packing-refs.sh b/t/t1409-avoid-packing-refs.sh index e5cb8a2..be12fb6 100755 --- a/t/t1409-avoid-packing-refs.sh +++ b/t/t1409-avoid-packing-refs.sh @@ -8,7 +8,7 @@ test_description='avoid rewriting packed-refs unnecessarily' # shouldn't upset readers, and it should be omitted if the file is # ever rewritten. mark_packed_refs () { - sed -e "s/^\(#.*\)/\1 t1409 /" <.git/packed-refs >.git/packed-refs.new && + sed -e "s/^\(#.*\)/\1 t1409 /" .git/packed-refs >.git/packed-refs.new && mv .git/packed-refs.new .git/packed-refs } @@ -27,15 +27,15 @@ test_expect_success 'setup' ' ' test_expect_success 'do not create packed-refs file gratuitously' ' - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $A && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $B && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref refs/heads/foo $C $B && - test_must_fail test -f .git/packed-refs && + test_path_is_missing .git/packed-refs && git update-ref -d refs/heads/foo && - test_must_fail test -f .git/packed-refs + test_path_is_missing .git/packed-refs ' test_expect_success 'check that marking the packed-refs file works' ' @@ -46,7 +46,7 @@ test_expect_success 'check that marking the packed-refs file works' ' git for-each-ref >actual && test_cmp expected actual && git pack-refs --all && - test_must_fail check_packed_refs_marked && + ! check_packed_refs_marked && git for-each-ref >actual2 && test_cmp expected actual2 ' @@ -80,7 +80,7 @@ test_expect_success 'touch packed-refs on delete of packed' ' git pack-refs --all && mark_packed_refs && git update-ref -d refs/heads/packed-delete && - test_must_fail check_packed_refs_marked + ! check_packed_refs_marked ' test_expect_success 'leave packed-refs untouched on update of loose' ' diff --git a/t/t1410-reflog.sh b/t/t1410-reflog.sh index 3e05353..76d9b74 100755 --- a/t/t1410-reflog.sh +++ b/t/t1410-reflog.sh @@ -20,24 +20,23 @@ check_have () { } check_fsck () { - output=$(git fsck --full) + git fsck --full >fsck.output case "$1" in '') - test -z "$output" ;; + test_must_be_empty fsck.output ;; *) - echo "$output" | grep "$1" ;; + test_i18ngrep "$1" fsck.output ;; esac } corrupt () { - aa=${1%??????????????????????????????????????} zz=${1#??} - mv .git/objects/$aa/$zz .git/$aa$zz + mv .git/objects/$(test_oid_to_path $1) .git/$1 } recover () { - aa=${1%??????????????????????????????????????} zz=${1#??} + aa=$(echo $1 | cut -c 1-2) mkdir -p .git/objects/$aa - mv .git/$aa$zz .git/objects/$aa/$zz + mv .git/$1 .git/objects/$(test_oid_to_path $1) } check_dont_have () { @@ -55,6 +54,7 @@ check_dont_have () { } test_expect_success setup ' + test_oid_init && mkdir -p A/B && echo rat >C && echo ox >A/D && @@ -195,7 +195,7 @@ test_expect_success 'delete' ' git reflog delete master@{1} && git reflog show master > output && - test $(($master_entry_count - 1)) = $(wc -l < output) && + test_line_count = $(($master_entry_count - 1)) output && test $HEAD_entry_count = $(git reflog | wc -l) && ! grep ox < output && @@ -209,7 +209,7 @@ test_expect_success 'delete' ' git reflog delete master@{07.04.2005.15:15:00.-0700} && git reflog show master > output && - test $(($master_entry_count - 1)) = $(wc -l < output) && + test_line_count = $(($master_entry_count - 1)) output && ! grep dragon < output ' @@ -232,25 +232,34 @@ test_expect_success '--expire=never' ' ' test_expect_success 'gc.reflogexpire=never' ' + test_config gc.reflogexpire never && + test_config gc.reflogexpireunreachable never && + + git reflog expire --verbose --all >output && + test_line_count = 9 output && - git config gc.reflogexpire never && - git config gc.reflogexpireunreachable never && - git reflog expire --verbose --all && git reflog refs/heads/master >output && test_line_count = 4 output ' test_expect_success 'gc.reflogexpire=false' ' + test_config gc.reflogexpire false && + test_config gc.reflogexpireunreachable false && - git config gc.reflogexpire false && - git config gc.reflogexpireunreachable false && git reflog expire --verbose --all && git reflog refs/heads/master >output && - test_line_count = 4 output && + test_line_count = 4 output + +' - git config --unset gc.reflogexpire && - git config --unset gc.reflogexpireunreachable +test_expect_success 'git reflog expire unknown reference' ' + test_config gc.reflogexpire never && + test_config gc.reflogexpireunreachable never && + test_must_fail git reflog expire master@{123} 2>stderr && + test_i18ngrep "points nowhere" stderr && + test_must_fail git reflog expire does-not-exist 2>stderr && + test_i18ngrep "points nowhere" stderr ' test_expect_success 'checkout should not delete log for packed ref' ' @@ -304,12 +313,12 @@ test_expect_success 'stale dirs do not cause d/f conflicts (reflogs off)' ' # Each line is 114 characters, so we need 75 to still have a few before the # last 8K. The 89-character padding on the final entry lines up our # newline exactly. -test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' +test_expect_success SHA1 'parsing reverse reflogs at BUFSIZ boundaries' ' git checkout -b reflogskip && - z38=00000000000000000000000000000000000000 && + zf=$(test_oid zero_2) && ident="abc <xyz> 0000000001 +0000" && for i in $(test_seq 1 75); do - printf "$z38%02d $z38%02d %s\t" $i $(($i+1)) "$ident" && + printf "$zf%02d $zf%02d %s\t" $i $(($i+1)) "$ident" && if test $i = 75; then for j in $(test_seq 1 89); do printf X @@ -320,7 +329,7 @@ test_expect_success 'parsing reverse reflogs at BUFSIZ boundaries' ' printf "\n" done >.git/logs/refs/heads/reflogskip && git rev-parse reflogskip@{73} >actual && - echo ${z38}03 >expect && + echo ${zf}03 >expect && test_cmp expect actual ' diff --git a/t/t1414-reflog-walk.sh b/t/t1414-reflog-walk.sh index feb1efd..1181a9f 100755 --- a/t/t1414-reflog-walk.sh +++ b/t/t1414-reflog-walk.sh @@ -18,10 +18,9 @@ do_walk () { git log -g --format="%gd %gs" "$@" } -sq="'" test_expect_success 'set up expected reflog' ' cat >expect.all <<-EOF - HEAD@{0} commit (merge): Merge branch ${sq}master${sq} into side + HEAD@{0} commit (merge): Merge branch ${SQ}master${SQ} into side HEAD@{1} commit: three HEAD@{2} checkout: moving from master to side HEAD@{3} commit: two diff --git a/t/t1415-worktree-refs.sh b/t/t1415-worktree-refs.sh index b664e51..bb2c757 100755 --- a/t/t1415-worktree-refs.sh +++ b/t/t1415-worktree-refs.sh @@ -76,4 +76,39 @@ test_expect_success 'reflog of worktrees/xx/HEAD' ' test_cmp expected actual.wt2 ' +test_expect_success 'for-each-ref from main repo' ' + mkdir fer1 && + git -C fer1 init repo && + test_commit -C fer1/repo initial && + git -C fer1/repo worktree add ../second && + git -C fer1/repo update-ref refs/bisect/main HEAD && + git -C fer1/repo update-ref refs/rewritten/main HEAD && + git -C fer1/repo update-ref refs/worktree/main HEAD && + git -C fer1/repo for-each-ref --format="%(refname)" | grep main >actual && + cat >expected <<-\EOF && + refs/bisect/main + refs/rewritten/main + refs/worktree/main + EOF + test_cmp expected actual +' + +test_expect_success 'for-each-ref from linked repo' ' + mkdir fer2 && + git -C fer2 init repo && + test_commit -C fer2/repo initial && + git -C fer2/repo worktree add ../second && + git -C fer2/second update-ref refs/bisect/second HEAD && + git -C fer2/second update-ref refs/rewritten/second HEAD && + git -C fer2/second update-ref refs/worktree/second HEAD && + git -C fer2/second for-each-ref --format="%(refname)" | grep second >actual && + cat >expected <<-\EOF && + refs/bisect/second + refs/heads/second + refs/rewritten/second + refs/worktree/second + EOF + test_cmp expected actual +' + test_done diff --git a/t/t1450-fsck.sh b/t/t1450-fsck.sh index c767e27..d09eff5 100755 --- a/t/t1450-fsck.sh +++ b/t/t1450-fsck.sh @@ -9,6 +9,7 @@ test_description='git fsck random collection of tests . ./test-lib.sh test_expect_success setup ' + test_oid_init && git config gc.auto 0 && git config i18n.commitencoding ISO-8859-1 && test_commit A fileA one && @@ -54,8 +55,8 @@ test_expect_success 'setup: helpers for corruption tests' ' test_expect_success 'object with bad sha1' ' sha=$(echo blob | git hash-object -w --stdin) && - old=$(echo $sha | sed "s+^..+&/+") && - new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && + old=$(test_oid_to_path "$sha") && + new=$(dirname $old)/$(test_oid ff_2) && sha="$(dirname $new)$(basename $new)" && mv .git/objects/$old .git/objects/$new && test_when_finished "remove_object $sha" && @@ -69,26 +70,23 @@ test_expect_success 'object with bad sha1' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "$sha.*corrupt" out + test_i18ngrep "$sha.*corrupt" out ' test_expect_success 'branch pointing to non-commit' ' git rev-parse HEAD^{tree} >.git/refs/heads/invalid && test_when_finished "git update-ref -d refs/heads/invalid" && test_must_fail git fsck 2>out && - cat out && - grep "not a commit" out + test_i18ngrep "not a commit" out ' test_expect_success 'HEAD link pointing at a funny object' ' test_when_finished "mv .git/SAVED_HEAD .git/HEAD" && mv .git/HEAD .git/SAVED_HEAD && - echo 0000000000000000000000000000000000000000 >.git/HEAD && + echo $ZERO_OID >.git/HEAD && # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail env GIT_DIR=.git git fsck 2>out && - cat out && - grep "detached HEAD points" out + test_i18ngrep "detached HEAD points" out ' test_expect_success 'HEAD link pointing at a funny place' ' @@ -97,8 +95,7 @@ test_expect_success 'HEAD link pointing at a funny place' ' echo "ref: refs/funny/place" >.git/HEAD && # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail env GIT_DIR=.git git fsck 2>out && - cat out && - grep "HEAD points to something strange" out + test_i18ngrep "HEAD points to something strange" out ' test_expect_success 'HEAD link pointing at a funny object (from different wt)' ' @@ -109,7 +106,7 @@ test_expect_success 'HEAD link pointing at a funny object (from different wt)' ' echo $ZERO_OID >.git/HEAD && # avoid corrupt/broken HEAD from interfering with repo discovery test_must_fail git -C wt fsck 2>out && - grep "main-worktree/HEAD: detached HEAD points" out + test_i18ngrep "main-worktree/HEAD: detached HEAD points" out ' test_expect_success 'other worktree HEAD link pointing at a funny object' ' @@ -117,7 +114,7 @@ test_expect_success 'other worktree HEAD link pointing at a funny object' ' git worktree add other && echo $ZERO_OID >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD: detached HEAD points" out + test_i18ngrep "worktrees/other/HEAD: detached HEAD points" out ' test_expect_success 'other worktree HEAD link pointing at missing object' ' @@ -125,7 +122,7 @@ test_expect_success 'other worktree HEAD link pointing at missing object' ' git worktree add other && echo "Contents missing from repo" | git hash-object --stdin >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD: invalid sha1 pointer" out + test_i18ngrep "worktrees/other/HEAD: invalid sha1 pointer" out ' test_expect_success 'other worktree HEAD link pointing at a funny place' ' @@ -133,7 +130,7 @@ test_expect_success 'other worktree HEAD link pointing at a funny place' ' git worktree add other && echo "ref: refs/funny/place" >.git/worktrees/other/HEAD && test_must_fail git fsck 2>out && - grep "worktrees/other/HEAD points to something strange" out + test_i18ngrep "worktrees/other/HEAD points to something strange" out ' test_expect_success 'email without @ is okay' ' @@ -144,7 +141,6 @@ test_expect_success 'email without @ is okay' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && git fsck 2>out && - cat out && ! grep "commit $new" out ' @@ -156,8 +152,7 @@ test_expect_success 'email with embedded > is not okay' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new" out + test_i18ngrep "error in commit $new" out ' test_expect_success 'missing < email delimiter is reported nicely' ' @@ -168,8 +163,7 @@ test_expect_success 'missing < email delimiter is reported nicely' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new.* - bad name" out + test_i18ngrep "error in commit $new.* - bad name" out ' test_expect_success 'missing email is reported nicely' ' @@ -180,8 +174,7 @@ test_expect_success 'missing email is reported nicely' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new.* - missing email" out + test_i18ngrep "error in commit $new.* - missing email" out ' test_expect_success '> in name is reported' ' @@ -192,8 +185,7 @@ test_expect_success '> in name is reported' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new" out + test_i18ngrep "error in commit $new" out ' # date is 2^64 + 1 @@ -206,8 +198,7 @@ test_expect_success 'integer overflow in timestamps is reported' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new.*integer overflow" out + test_i18ngrep "error in commit $new.*integer overflow" out ' test_expect_success 'commit with NUL in header' ' @@ -218,8 +209,7 @@ test_expect_success 'commit with NUL in header' ' git update-ref refs/heads/bogus "$new" && test_when_finished "git update-ref -d refs/heads/bogus" && test_must_fail git fsck 2>out && - cat out && - grep "error in commit $new.*unterminated header: NUL at offset" out + test_i18ngrep "error in commit $new.*unterminated header: NUL at offset" out ' test_expect_success 'tree object with duplicate entries' ' @@ -240,14 +230,20 @@ test_expect_success 'tree object with duplicate entries' ' git hash-object -w -t tree --stdin ) && test_must_fail git fsck 2>out && - grep "error in tree .*contains duplicate file entries" out + test_i18ngrep "error in tree .*contains duplicate file entries" out ' test_expect_success 'unparseable tree object' ' + test_oid_cache <<-\EOF && + junk sha1:twenty-bytes-of-junk + junk sha256:twenty-bytes-of-junk-twelve-more + EOF + test_when_finished "git update-ref -d refs/heads/wrong" && test_when_finished "remove_object \$tree_sha1" && test_when_finished "remove_object \$commit_sha1" && - tree_sha1=$(printf "100644 \0twenty-bytes-of-junk" | git hash-object -t tree --stdin -w --literally) && + junk=$(test_oid junk) && + tree_sha1=$(printf "100644 \0$junk" | git hash-object -t tree --stdin -w --literally) && commit_sha1=$(git commit-tree $tree_sha1) && git update-ref refs/heads/wrong $commit_sha1 && test_must_fail git fsck 2>out && @@ -256,10 +252,6 @@ test_expect_success 'unparseable tree object' ' test_i18ngrep ! "fatal: empty filename in tree entry" out ' -hex2oct() { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'tree entry with type mismatch' ' test_when_finished "remove_object \$blob" && test_when_finished "remove_object \$tree" && @@ -279,8 +271,9 @@ test_expect_success 'tree entry with type mismatch' ' ' test_expect_success 'tag pointing to nonexistent' ' - cat >invalid-tag <<-\EOF && - object ffffffffffffffffffffffffffffffffffffffff + badoid=$(test_oid deadbeef) && + cat >invalid-tag <<-EOF && + object $badoid type commit tag invalid tagger T A Gger <tagger@example.com> 1234567890 -0000 @@ -293,8 +286,7 @@ test_expect_success 'tag pointing to nonexistent' ' echo $tag >.git/refs/tags/invalid && test_when_finished "git update-ref -d refs/tags/invalid" && test_must_fail git fsck --tags >out && - cat out && - grep "broken link" out + test_i18ngrep "broken link" out ' test_expect_success 'tag pointing to something else than its type' ' @@ -336,7 +328,7 @@ test_expect_success 'tag with incorrect tag name & missing tagger' ' warning in tag $tag: badTagName: invalid '\''tag'\'' name: wrong name format warning in tag $tag: missingTaggerEntry: invalid format - expected '\''tagger'\'' line EOF - test_cmp expect out + test_i18ncmp expect out ' test_expect_success 'tag with bad tagger' ' @@ -355,7 +347,7 @@ test_expect_success 'tag with bad tagger' ' echo $tag >.git/refs/tags/wrong && test_when_finished "git update-ref -d refs/tags/wrong" && test_must_fail git fsck --tags 2>out && - grep "error in tag .*: invalid author/committer" out + test_i18ngrep "error in tag .*: invalid author/committer" out ' test_expect_success 'tag with NUL in header' ' @@ -374,8 +366,7 @@ test_expect_success 'tag with NUL in header' ' echo $tag >.git/refs/tags/wrong && test_when_finished "git update-ref -d refs/tags/wrong" && test_must_fail git fsck --tags 2>out && - cat out && - grep "error in tag $tag.*unterminated header: NUL at offset" out + test_i18ngrep "error in tag $tag.*unterminated header: NUL at offset" out ' test_expect_success 'cleaned up' ' @@ -390,8 +381,8 @@ test_expect_success 'rev-list --verify-objects' ' test_expect_success 'rev-list --verify-objects with bad sha1' ' sha=$(echo blob | git hash-object -w --stdin) && - old=$(echo $sha | sed "s+^..+&/+") && - new=$(dirname $old)/ffffffffffffffffffffffffffffffffffffff && + old=$(test_oid_to_path $sha) && + new=$(dirname $old)/$(test_oid ff_2) && sha="$(dirname $new)$(basename $new)" && mv .git/objects/$old .git/objects/$new && test_when_finished "remove_object $sha" && @@ -405,8 +396,7 @@ test_expect_success 'rev-list --verify-objects with bad sha1' ' test_when_finished "git update-ref -d refs/heads/bogus" && test_might_fail git rev-list --verify-objects refs/heads/bogus >/dev/null 2>out && - cat out && - test_i18ngrep -q "error: sha1 mismatch 63ffffffffffffffffffffffffffffffffffffff" out + test_i18ngrep -q "error: hash mismatch $(dirname $new)$(test_oid ff_2)" out ' test_expect_success 'force fsck to ignore double author' ' @@ -421,28 +411,25 @@ test_expect_success 'force fsck to ignore double author' ' ' _bz='\0' -_bz5="$_bz$_bz$_bz$_bz$_bz" -_bz20="$_bz5$_bz5$_bz5$_bz5" +_bzoid=$(printf $ZERO_OID | sed -e 's/00/\\0/g') test_expect_success 'fsck notices blob entry pointing to null sha1' ' (git init null-blob && cd null-blob && - sha=$(printf "100644 file$_bz$_bz20" | + sha=$(printf "100644 file$_bz$_bzoid" | git hash-object -w --stdin -t tree) && git fsck 2>out && - cat out && - grep "warning.*null sha1" out + test_i18ngrep "warning.*null sha1" out ) ' test_expect_success 'fsck notices submodule entry pointing to null sha1' ' (git init null-commit && cd null-commit && - sha=$(printf "160000 submodule$_bz$_bz20" | + sha=$(printf "160000 submodule$_bz$_bzoid" | git hash-object -w --stdin -t tree) && git fsck 2>out && - cat out && - grep "warning.*null sha1" out + test_i18ngrep "warning.*null sha1" out ) ' @@ -463,8 +450,7 @@ while read name path pretty; do printf "$mode $type %s\t%s" "$value" "$path" >bad && bad_tree=$(git mktree <bad) && git fsck 2>out && - cat out && - grep "warning.*tree $bad_tree" out + test_i18ngrep "warning.*tree $bad_tree" out )' done <<-\EOF 100644 blob @@ -510,9 +496,9 @@ test_expect_success 'NUL in commit' ' git branch bad $(cat name) && test_must_fail git -c fsck.nulInCommit=error fsck 2>warn.1 && - grep nulInCommit warn.1 && + test_i18ngrep nulInCommit warn.1 && git fsck 2>warn.2 && - grep nulInCommit warn.2 + test_i18ngrep nulInCommit warn.2 ) ' @@ -591,7 +577,7 @@ test_expect_success 'fsck --connectivity-only' ' # its type. That lets us see that --connectivity-only is # not actually looking at the contents, but leaves it # free to examine the type if it chooses. - empty=.git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 && + empty=.git/objects/$(test_oid_to_path $EMPTY_BLOB) && blob=$(echo unrelated | git hash-object -w --stdin) && mv -f $(sha1_file $blob) $empty && @@ -630,18 +616,20 @@ test_expect_success 'fsck --name-objects' ' remove_object $(git rev-parse julius:caesar.t) && test_must_fail git fsck --name-objects >out && tree=$(git rev-parse --verify julius:) && - egrep "$tree \((refs/heads/master|HEAD)@\{[0-9]*\}:" out + test_i18ngrep "$tree (refs/tags/julius:" out ) ' test_expect_success 'alternate objects are correctly blamed' ' test_when_finished "rm -rf alt.git .git/objects/info/alternates" && + name=$(test_oid numeric) && + path=$(test_oid_to_path "$name") && git init --bare alt.git && echo "../../alt.git/objects" >.git/objects/info/alternates && - mkdir alt.git/objects/12 && - >alt.git/objects/12/34567890123456789012345678901234567890 && + mkdir alt.git/objects/$(dirname $path) && + >alt.git/objects/$(dirname $path)/$(basename $path) && test_must_fail git fsck >out 2>&1 && - grep alt.git out + test_i18ngrep alt.git out ' test_expect_success 'fsck errors in packed objects' ' @@ -660,8 +648,8 @@ test_expect_success 'fsck errors in packed objects' ' remove_object $one && remove_object $two && test_must_fail git fsck 2>out && - grep "error in commit $one.* - bad name" out && - grep "error in commit $two.* - bad name" out && + test_i18ngrep "error in commit $one.* - bad name" out && + test_i18ngrep "error in commit $two.* - bad name" out && ! grep corrupt out ' @@ -741,7 +729,7 @@ test_expect_success 'fsck detects truncated loose object' ' # for each of type, we have one version which is referenced by another object # (and so while unreachable, not dangling), and another variant which really is # dangling. -test_expect_success 'fsck notices dangling objects' ' +test_expect_success 'create dangling-object repository' ' git init dangling && ( cd dangling && @@ -752,16 +740,31 @@ test_expect_success 'fsck notices dangling objects' ' commit=$(git commit-tree $tree) && dcommit=$(git commit-tree -p $commit $tree) && - cat >expect <<-EOF && + cat >expect <<-EOF dangling blob $dblob dangling commit $dcommit dangling tree $dtree EOF + ) +' +test_expect_success 'fsck notices dangling objects' ' + ( + cd dangling && git fsck >actual && # the output order is non-deterministic, as it comes from a hash sort <actual >actual.sorted && - test_cmp expect actual.sorted + test_i18ncmp expect actual.sorted + ) +' + +test_expect_success 'fsck --connectivity-only notices dangling objects' ' + ( + cd dangling && + git fsck --connectivity-only >actual && + # the output order is non-deterministic, as it comes from a hash + sort <actual >actual.sorted && + test_i18ncmp expect actual.sorted ) ' @@ -809,7 +812,7 @@ test_expect_success 'detect corrupt index file in fsck' ' test_when_finished "mv .git/index.backup .git/index" && corrupt_index_checksum && test_must_fail git fsck --cache 2>errors && - grep "bad index file" errors + test_i18ngrep "bad index file" errors ' test_done diff --git a/t/t1500-rev-parse.sh b/t/t1500-rev-parse.sh index 01abee5..603019b 100755 --- a/t/t1500-rev-parse.sh +++ b/t/t1500-rev-parse.sh @@ -59,6 +59,7 @@ test_rev_parse () { ROOT=$(pwd) test_expect_success 'setup' ' + test_oid_init && mkdir -p sub/dir work && cp -R .git repo.git ' @@ -131,6 +132,30 @@ test_expect_success 'rev-parse --is-shallow-repository in non-shallow repo' ' test_cmp expect actual ' +test_expect_success 'rev-parse --show-object-format in repo' ' + echo "$(test_oid algo)" >expect && + git rev-parse --show-object-format >actual && + test_cmp expect actual && + git rev-parse --show-object-format=storage >actual && + test_cmp expect actual && + git rev-parse --show-object-format=input >actual && + test_cmp expect actual && + git rev-parse --show-object-format=output >actual && + test_cmp expect actual && + test_must_fail git rev-parse --show-object-format=squeamish-ossifrage 2>err && + grep "unknown mode for --show-object-format: squeamish-ossifrage" err +' + +test_expect_success '--show-toplevel from subdir of working tree' ' + pwd >expect && + git -C sub/dir rev-parse --show-toplevel >actual && + test_cmp expect actual +' + +test_expect_success '--show-toplevel from inside .git' ' + test_must_fail git -C .git rev-parse --show-toplevel +' + test_expect_success 'showing the superproject correctly' ' git rev-parse --show-superproject-working-tree >out && test_must_be_empty out && diff --git a/t/t1501-work-tree.sh b/t/t1501-work-tree.sh index 3498d3d..b755580 100755 --- a/t/t1501-work-tree.sh +++ b/t/t1501-work-tree.sh @@ -350,7 +350,7 @@ test_expect_success 'Multi-worktree setup' ' mkdir work && mkdir -p repo.git/repos/foo && cp repo.git/HEAD repo.git/index repo.git/repos/foo && - test_might_fail cp repo.git/sharedindex.* repo.git/repos/foo && + { cp repo.git/sharedindex.* repo.git/repos/foo || :; } && sane_unset GIT_DIR GIT_CONFIG GIT_WORK_TREE ' diff --git a/t/t1506-rev-parse-diagnosis.sh b/t/t1506-rev-parse-diagnosis.sh index 4ee009d..52edcbd 100755 --- a/t/t1506-rev-parse-diagnosis.sh +++ b/t/t1506-rev-parse-diagnosis.sh @@ -8,12 +8,11 @@ exec </dev/null test_did_you_mean () { - sq="'" && cat >expected <<-EOF && - fatal: Path '$2$3' $4, but not ${5:-$sq$3$sq}. - Did you mean '$1:$2$3'${2:+ aka $sq$1:./$3$sq}? + fatal: path '$2$3' $4, but not ${5:-$SQ$3$SQ} + hint: Did you mean '$1:$2$3'${2:+ aka $SQ$1:./$3$SQ}? EOF - test_cmp expected error + test_i18ncmp expected error } HASH_file= @@ -104,66 +103,66 @@ test_expect_success 'correct relative file objects (6)' ' test_expect_success 'incorrect revision id' ' test_must_fail git rev-parse foobar:file.txt 2>error && - grep "Invalid object name '"'"'foobar'"'"'." error && - test_must_fail git rev-parse foobar 2> error && + test_i18ngrep "invalid object name .foobar." error && + test_must_fail git rev-parse foobar 2>error && test_i18ngrep "unknown revision or path not in the working tree." error ' test_expect_success 'incorrect file in sha1:path' ' - test_must_fail git rev-parse HEAD:nothing.txt 2> error && - grep "fatal: Path '"'"'nothing.txt'"'"' does not exist in '"'"'HEAD'"'"'" error && - test_must_fail git rev-parse HEAD:index-only.txt 2> error && - grep "fatal: Path '"'"'index-only.txt'"'"' exists on disk, but not in '"'"'HEAD'"'"'." error && + test_must_fail git rev-parse HEAD:nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist in .HEAD." error && + test_must_fail git rev-parse HEAD:index-only.txt 2>error && + test_i18ngrep "path .index-only.txt. exists on disk, but not in .HEAD." error && (cd subdir && - test_must_fail git rev-parse HEAD:file2.txt 2> error && + test_must_fail git rev-parse HEAD:file2.txt 2>error && test_did_you_mean HEAD subdir/ file2.txt exists ) ' test_expect_success 'incorrect file in :path and :N:path' ' - test_must_fail git rev-parse :nothing.txt 2> error && - grep "fatal: Path '"'"'nothing.txt'"'"' does not exist (neither on disk nor in the index)." error && - test_must_fail git rev-parse :1:nothing.txt 2> error && - grep "Path '"'"'nothing.txt'"'"' does not exist (neither on disk nor in the index)." error && - test_must_fail git rev-parse :1:file.txt 2> error && + test_must_fail git rev-parse :nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist (neither on disk nor in the index)" error && + test_must_fail git rev-parse :1:nothing.txt 2>error && + test_i18ngrep "path .nothing.txt. does not exist (neither on disk nor in the index)" error && + test_must_fail git rev-parse :1:file.txt 2>error && test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && (cd subdir && - test_must_fail git rev-parse :1:file.txt 2> error && + test_must_fail git rev-parse :1:file.txt 2>error && test_did_you_mean ":0" "" file.txt "is in the index" "at stage 1" && - test_must_fail git rev-parse :file2.txt 2> error && + test_must_fail git rev-parse :file2.txt 2>error && test_did_you_mean ":0" subdir/ file2.txt "is in the index" && - test_must_fail git rev-parse :2:file2.txt 2> error && + test_must_fail git rev-parse :2:file2.txt 2>error && test_did_you_mean :0 subdir/ file2.txt "is in the index") && - test_must_fail git rev-parse :disk-only.txt 2> error && - grep "fatal: Path '"'"'disk-only.txt'"'"' exists on disk, but not in the index." error + test_must_fail git rev-parse :disk-only.txt 2>error && + test_i18ngrep "path .disk-only.txt. exists on disk, but not in the index" error ' test_expect_success 'invalid @{n} reference' ' test_must_fail git rev-parse master@{99999} >output 2>error && - test -z "$(cat output)" && - grep "fatal: Log for [^ ]* only has [0-9][0-9]* entries." error && + test_must_be_empty output && + test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error && test_must_fail git rev-parse --verify master@{99999} >output 2>error && - test -z "$(cat output)" && - grep "fatal: Log for [^ ]* only has [0-9][0-9]* entries." error + test_must_be_empty output && + test_i18ngrep "log for [^ ]* only has [0-9][0-9]* entries" error ' test_expect_success 'relative path not found' ' ( cd subdir && test_must_fail git rev-parse HEAD:./nonexistent.txt 2>error && - grep subdir/nonexistent.txt error + test_i18ngrep subdir/nonexistent.txt error ) ' test_expect_success 'relative path outside worktree' ' test_must_fail git rev-parse HEAD:../file.txt >output 2>error && - test -z "$(cat output)" && + test_must_be_empty output && test_i18ngrep "outside repository" error ' test_expect_success 'relative path when cwd is outside worktree' ' test_must_fail git --git-dir=.git --work-tree=subdir rev-parse HEAD:./file.txt >output 2>error && - test -z "$(cat output)" && - grep "relative path syntax can.t be used outside working tree." error + test_must_be_empty output && + test_i18ngrep "relative path syntax can.t be used outside working tree" error ' test_expect_success '<commit>:file correctly diagnosed after a pathname' ' @@ -215,4 +214,26 @@ test_expect_success 'arg before dashdash must be a revision (ambiguous)' ' test_cmp expect actual ' +test_expect_success 'reject Nth parent if N is too high' ' + test_must_fail git rev-parse HEAD^100000000000000000000000000000000 +' + +test_expect_success 'reject Nth ancestor if N is too high' ' + test_must_fail git rev-parse HEAD~100000000000000000000000000000000 +' + +test_expect_success 'pathspecs with wildcards are not ambiguous' ' + echo "*.c" >expect && + git rev-parse "*.c" >actual && + test_cmp expect actual +' + +test_expect_success 'backslash does not trigger wildcard rule' ' + test_must_fail git rev-parse "foo\\bar" +' + +test_expect_success 'escaped char does not trigger wildcard rule' ' + test_must_fail git rev-parse "foo\\*bar" +' + test_done diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index fa3e499..dfc0d96 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -28,16 +28,9 @@ test_expect_success 'setup' ' ) ' -sq="'" - -full_name () { - (cd clone && - git rev-parse --symbolic-full-name "$@") -} - commit_subject () { (cd clone && - git show -s --pretty=format:%s "$@") + git show -s --pretty=tformat:%s "$@") } error_message () { @@ -46,63 +39,78 @@ error_message () { } test_expect_success '@{upstream} resolves to correct full name' ' - test refs/remotes/origin/master = "$(full_name @{upstream})" && - test refs/remotes/origin/master = "$(full_name @{UPSTREAM})" && - test refs/remotes/origin/master = "$(full_name @{UpSTReam})" + echo refs/remotes/origin/master >expect && + git -C clone rev-parse --symbolic-full-name @{upstream} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{UPSTREAM} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{UpSTReam} >actual && + test_cmp expect actual ' test_expect_success '@{u} resolves to correct full name' ' - test refs/remotes/origin/master = "$(full_name @{u})" && - test refs/remotes/origin/master = "$(full_name @{U})" + echo refs/remotes/origin/master >expect && + git -C clone rev-parse --symbolic-full-name @{u} >actual && + test_cmp expect actual && + git -C clone rev-parse --symbolic-full-name @{U} >actual && + test_cmp expect actual ' test_expect_success 'my-side@{upstream} resolves to correct full name' ' - test refs/remotes/origin/side = "$(full_name my-side@{u})" + echo refs/remotes/origin/side >expect && + git -C clone rev-parse --symbolic-full-name my-side@{u} >actual && + test_cmp expect actual ' test_expect_success 'upstream of branch with @ in middle' ' - full_name fun@ny@{u} >actual && + git -C clone rev-parse --symbolic-full-name fun@ny@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual && - full_name fun@ny@{U} >actual && + git -C clone rev-parse --symbolic-full-name fun@ny@{U} >actual && test_cmp expect actual ' test_expect_success 'upstream of branch with @ at start' ' - full_name @funny@{u} >actual && + git -C clone rev-parse --symbolic-full-name @funny@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual ' test_expect_success 'upstream of branch with @ at end' ' - full_name funny@@{u} >actual && + git -C clone rev-parse --symbolic-full-name funny@@{u} >actual && echo refs/remotes/origin/side >expect && test_cmp expect actual ' test_expect_success 'refs/heads/my-side@{upstream} does not resolve to my-side{upstream}' ' - test_must_fail full_name refs/heads/my-side@{upstream} + test_must_fail git -C clone rev-parse --symbolic-full-name refs/heads/my-side@{upstream} ' test_expect_success 'my-side@{u} resolves to correct commit' ' git checkout side && test_commit 5 && (cd clone && git fetch) && - test 2 = "$(commit_subject my-side)" && - test 5 = "$(commit_subject my-side@{u})" + echo 2 >expect && + commit_subject my-side >actual && + test_cmp expect actual && + echo 5 >expect && + commit_subject my-side@{u} >actual ' test_expect_success 'not-tracking@{u} fails' ' - test_must_fail full_name non-tracking@{u} && + test_must_fail git -C clone rev-parse --symbolic-full-name non-tracking@{u} && (cd clone && git checkout --no-track -b non-tracking) && - test_must_fail full_name non-tracking@{u} + test_must_fail git -C clone rev-parse --symbolic-full-name non-tracking@{u} ' test_expect_success '<branch>@{u}@{1} resolves correctly' ' test_commit 6 && (cd clone && git fetch) && - test 5 = $(commit_subject my-side@{u}@{1}) && - test 5 = $(commit_subject my-side@{U}@{1}) + echo 5 >expect && + commit_subject my-side@{u}@{1} >actual && + test_cmp expect actual && + commit_subject my-side@{U}@{1} >actual && + test_cmp expect actual ' test_expect_success '@{u} without specifying branch fails on a detached HEAD' ' @@ -129,7 +137,7 @@ test_expect_success 'merge my-side@{u} records the correct name' ' git branch -t new my-side@{u} && git merge -s ours new@{u} && git show -s --pretty=tformat:%s >actual && - echo "Merge remote-tracking branch ${sq}origin/side${sq}" >expect && + echo "Merge remote-tracking branch ${SQ}origin/side${SQ}" >expect && test_cmp expect actual ) ' @@ -151,12 +159,14 @@ test_expect_success 'checkout other@{u}' ' ' test_expect_success 'branch@{u} works when tracking a local branch' ' - test refs/heads/master = "$(full_name local-master@{u})" + echo refs/heads/master >expect && + git -C clone rev-parse --symbolic-full-name local-master@{u} >actual && + test_cmp expect actual ' test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: no upstream configured for branch ${sq}non-tracking${sq} + fatal: no upstream configured for branch ${SQ}non-tracking${SQ} EOF error_message non-tracking@{u} && test_i18ncmp expect error @@ -164,7 +174,7 @@ test_expect_success 'branch@{u} error message when no upstream' ' test_expect_success '@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: no upstream configured for branch ${sq}master${sq} + fatal: no upstream configured for branch ${SQ}master${SQ} EOF test_must_fail git rev-parse --verify @{u} 2>actual && test_i18ncmp expect actual @@ -172,7 +182,7 @@ test_expect_success '@{u} error message when no upstream' ' test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && - fatal: no such branch: ${sq}no-such-branch${sq} + fatal: no such branch: ${SQ}no-such-branch${SQ} EOF error_message no-such-branch@{u} && test_i18ncmp expect error @@ -189,7 +199,7 @@ test_expect_success '@{u} error message when not on a branch' ' test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && - fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch + fatal: upstream branch ${SQ}refs/heads/side${SQ} not stored as a remote-tracking branch EOF error_message bad-upstream@{u} && test_i18ncmp expect error @@ -205,35 +215,37 @@ test_expect_success 'pull works when tracking a local branch' ' # makes sense if the previous one succeeded test_expect_success '@{u} works when tracking a local branch' ' - test refs/heads/master = "$(full_name @{u})" + echo refs/heads/master >expect && + git -C clone rev-parse --symbolic-full-name @{u} >actual && + test_cmp expect actual ' -commit=$(git rev-parse HEAD) -cat >expect <<EOF -commit $commit -Reflog: master@{0} (C O Mitter <committer@example.com>) -Reflog message: branch: Created from HEAD -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3 -EOF test_expect_success 'log -g other@{u}' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit + Reflog: master@{0} (C O Mitter <committer@example.com>) + Reflog message: branch: Created from HEAD + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 + + 3 + EOF git log -1 -g other@{u} >actual && test_cmp expect actual ' -cat >expect <<EOF -commit $commit -Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) -Reflog message: branch: Created from HEAD -Author: A U Thor <author@example.com> -Date: Thu Apr 7 15:15:13 2005 -0700 - - 3 -EOF - test_expect_success 'log -g other@{u}@{now}' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit + Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>) + Reflog message: branch: Created from HEAD + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:15:13 2005 -0700 + + 3 + EOF git log -1 -g other@{u}@{now} >actual && test_cmp expect actual ' diff --git a/t/t1512-rev-parse-disambiguation.sh b/t/t1512-rev-parse-disambiguation.sh index e4d5b56..18fa6cf 100755 --- a/t/t1512-rev-parse-disambiguation.sh +++ b/t/t1512-rev-parse-disambiguation.sh @@ -282,7 +282,7 @@ test_expect_success 'rev-parse --disambiguate' ' # commits created by commit-tree in earlier tests share a # different prefix. git rev-parse --disambiguate=000000000 >actual && - test $(wc -l <actual) = 16 && + test_line_count = 16 actual && test "$(sed -e "s/^\(.........\).*/\1/" actual | sort -u)" = 000000000 ' @@ -339,7 +339,7 @@ test_expect_success C_LOCALE_OUTPUT 'ambiguity hints' ' test_expect_success C_LOCALE_OUTPUT 'ambiguity hints respect type' ' test_must_fail git rev-parse 000000000^{commit} 2>stderr && grep ^hint: stderr >hints && - # 5 commits, 1 tag (which is a commitish), plus intro line + # 5 commits, 1 tag (which is a committish), plus intro line test_line_count = 7 hints ' @@ -388,4 +388,14 @@ test_expect_success C_LOCALE_OUTPUT 'ambiguous commits are printed by type first done ' +test_expect_success 'cat-file --batch and --batch-check show ambiguous' ' + echo "0000 ambiguous" >expect && + echo 0000 | git cat-file --batch-check >actual 2>err && + test_cmp expect actual && + test_i18ngrep hint: err && + echo 0000 | git cat-file --batch >actual 2>err && + test_cmp expect actual && + test_i18ngrep hint: err +' + test_done diff --git a/t/t1600-index.sh b/t/t1600-index.sh index 42962ed..b7c31aa 100755 --- a/t/t1600-index.sh +++ b/t/t1600-index.sh @@ -59,17 +59,42 @@ test_expect_success 'out of bounds index.version issues warning' ' ) ' -test_expect_success 'GIT_INDEX_VERSION takes precedence over config' ' +test_index_version () { + INDEX_VERSION_CONFIG=$1 && + FEATURE_MANY_FILES=$2 && + ENV_VAR_VERSION=$3 + EXPECTED_OUTPUT_VERSION=$4 && ( rm -f .git/index && - GIT_INDEX_VERSION=4 && - export GIT_INDEX_VERSION && - git config --add index.version 2 && + rm -f .git/config && + if test "$INDEX_VERSION_CONFIG" -ne 0 + then + git config --add index.version $INDEX_VERSION_CONFIG + fi && + git config --add feature.manyFiles $FEATURE_MANY_FILES + if test "$ENV_VAR_VERSION" -ne 0 + then + GIT_INDEX_VERSION=$ENV_VAR_VERSION && + export GIT_INDEX_VERSION + else + unset GIT_INDEX_VERSION + fi && git add a 2>&1 && - echo 4 >expect && + echo $EXPECTED_OUTPUT_VERSION >expect && test-tool index-version <.git/index >actual && test_cmp expect actual ) +} + +test_expect_success 'index version config precedence' ' + test_index_version 0 false 0 2 && + test_index_version 2 false 0 2 && + test_index_version 3 false 0 2 && + test_index_version 4 false 0 4 && + test_index_version 2 false 4 4 && + test_index_version 2 true 0 2 && + test_index_version 0 true 0 4 && + test_index_version 0 true 2 2 ' test_done diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index 4667e1a..12a5568 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -20,6 +20,22 @@ create_non_racy_file () { test-tool chmtime =-5 "$1" } +test_expect_success 'setup' ' + test_oid_cache <<-EOF + own_v3 sha1:8299b0bcd1ac364e5f1d7768efb62fa2da79a339 + own_v3 sha256:38a6d2925e3eceec33ad7b34cbff4e0086caa0daf28f31e51f5bd94b4a7af86b + + base_v3 sha1:39d890139ee5356c7ef572216cebcd27aa41f9df + base_v3 sha256:c9baeadf905112bf6c17aefbd7d02267afd70ded613c30cafed2d40cb506e1ed + + own_v4 sha1:432ef4b63f32193984f339431fd50ca796493569 + own_v4 sha256:6738ac6319c25b694afa7bcc313deb182d1a59b68bf7a47b4296de83478c0420 + + base_v4 sha1:508851a7f0dfa8691e9f69c7f055865389012491 + base_v4 sha256:3177d4adfdd4b6904f7e921d91d715a471c0dde7cf6a4bba574927f02b699508 + EOF +' + test_expect_success 'enable split index' ' git config splitIndex.maxPercentChange 100 && git update-index --split-index && @@ -29,11 +45,11 @@ test_expect_success 'enable split index' ' # NEEDSWORK: Stop hard-coding checksums. if test "$indexversion" = "4" then - own=432ef4b63f32193984f339431fd50ca796493569 - base=508851a7f0dfa8691e9f69c7f055865389012491 + own=$(test_oid own_v4) + base=$(test_oid base_v4) else - own=8299b0bcd1ac364e5f1d7768efb62fa2da79a339 - base=39d890139ee5356c7ef572216cebcd27aa41f9df + own=$(test_oid own_v3) + base=$(test_oid base_v3) fi && cat >expect <<-EOF && @@ -99,17 +115,18 @@ test_expect_success 'enable split index again, "one" now belongs to base index"' test_expect_success 'modify original file, base index untouched' ' echo modified | create_non_racy_file one && + file1_blob=$(git hash-object one) && git update-index one && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q replacements: 0 deletions: EOF @@ -121,7 +138,7 @@ test_expect_success 'add another file, which stays index' ' git update-index --add two && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && @@ -129,7 +146,7 @@ test_expect_success 'add another file, which stays index' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q 100644 $EMPTY_BLOB 0 two replacements: 0 deletions: @@ -141,14 +158,14 @@ test_expect_success 'remove file not in base index' ' git update-index --force-remove two && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0 one + 100644 $file1_blob 0 one EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && q_to_tab >expect <<-EOF && $BASE - 100644 2e0996000b7e9019eabcad29391bf0f5c7702f0b 0Q + 100644 $file1_blob 0Q replacements: 0 deletions: EOF @@ -237,9 +254,9 @@ test_expect_success 'set core.splitIndex config variable to true' ' git update-index --add three && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 three - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two + 100644 $EMPTY_BLOB 0 one + 100644 $EMPTY_BLOB 0 three + 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && BASE=$(test-tool dump-split-index .git/index | grep "^base") && @@ -257,8 +274,8 @@ test_expect_success 'set core.splitIndex config variable to false' ' git update-index --force-remove three && git ls-files --stage >ls-files.actual && cat >ls-files.expect <<-EOF && - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 one - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 two + 100644 $EMPTY_BLOB 0 one + 100644 $EMPTY_BLOB 0 two EOF test_cmp ls-files.expect ls-files.actual && test-tool dump-split-index .git/index | sed "/^own/d" >actual && @@ -285,7 +302,7 @@ test_expect_success 'set core.splitIndex config variable back to true' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 four + 100644 $EMPTY_BLOB 0 four replacements: deletions: EOF @@ -309,7 +326,7 @@ test_expect_success 'check behavior with splitIndex.maxPercentChange unset' ' test-tool dump-split-index .git/index | sed "/^own/d" >actual && cat >expect <<-EOF && $BASE - 100644 e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 0 six + 100644 $EMPTY_BLOB 0 six replacements: deletions: EOF @@ -472,4 +489,22 @@ test_expect_success 'writing split index with null sha1 does not write cache tre test_line_count = 0 cache-tree.out ' +test_expect_success 'do not refresh null base index' ' + test_create_repo merge && + ( + cd merge && + test_commit initial && + git checkout -b side-branch && + test_commit extra && + git checkout master && + git update-index --split-index && + test_commit more && + # must not write a new shareindex, or we wont catch the problem + git -c splitIndex.maxPercentChange=100 merge --no-edit side-branch 2>err && + # i.e. do not expect warnings like + # could not freshen shared index .../shareindex.00000... + test_must_be_empty err + ) +' + test_done diff --git a/t/t2014-switch.sh b/t/t2014-checkout-switch.sh index ccfb147..ccfb147 100755 --- a/t/t2014-switch.sh +++ b/t/t2014-checkout-switch.sh diff --git a/t/t2018-checkout-branch.sh b/t/t2018-checkout-branch.sh index 2131fb2..bbca7ef 100755 --- a/t/t2018-checkout-branch.sh +++ b/t/t2018-checkout-branch.sh @@ -1,50 +1,76 @@ #!/bin/sh -test_description='checkout ' +test_description='checkout' . ./test-lib.sh -# Arguments: <branch> <sha> [<checkout options>] +# Arguments: [!] <branch> <oid> [<checkout options>] # # Runs "git checkout" to switch to <branch>, testing that # # 1) we are on the specified branch, <branch>; -# 2) HEAD is <sha>; if <sha> is not specified, the old HEAD is used. +# 2) HEAD is <oid>; if <oid> is not specified, the old HEAD is used. # # If <checkout options> is not specified, "git checkout" is run with -b. -do_checkout() { +# +# If the first argument is `!`, "git checkout" is expected to fail when +# it is run. +do_checkout () { + should_fail= && + if test "x$1" = "x!" + then + should_fail=yes && + shift + fi && exp_branch=$1 && exp_ref="refs/heads/$exp_branch" && - # if <sha> is not specified, use HEAD. - exp_sha=${2:-$(git rev-parse --verify HEAD)} && + # if <oid> is not specified, use HEAD. + exp_oid=${2:-$(git rev-parse --verify HEAD)} && # default options for git checkout: -b - if [ -z "$3" ]; then + if test -z "$3" + then opts="-b" else opts="$3" fi - git checkout $opts $exp_branch $exp_sha && + if test -n "$should_fail" + then + test_must_fail git checkout $opts $exp_branch $exp_oid + else + git checkout $opts $exp_branch $exp_oid && + echo "$exp_ref" >ref.expect && + git rev-parse --symbolic-full-name HEAD >ref.actual && + test_cmp ref.expect ref.actual && + echo "$exp_oid" >oid.expect && + git rev-parse --verify HEAD >oid.actual && + test_cmp oid.expect oid.actual + fi +} - test $exp_ref = $(git rev-parse --symbolic-full-name HEAD) && - test $exp_sha = $(git rev-parse --verify HEAD) +test_dirty_unmergeable () { + test_expect_code 1 git diff --exit-code } -test_dirty_unmergeable() { - ! git diff --exit-code >/dev/null +test_dirty_unmergeable_discards_changes () { + git diff --exit-code } -setup_dirty_unmergeable() { +setup_dirty_unmergeable () { echo >>file1 change2 } -test_dirty_mergeable() { - ! git diff --cached --exit-code >/dev/null +test_dirty_mergeable () { + test_expect_code 1 git diff --cached --exit-code } -setup_dirty_mergeable() { +test_dirty_mergeable_discards_changes () { + git diff --cached --exit-code +} + +setup_dirty_mergeable () { echo >file2 file2 && git add file2 } @@ -60,38 +86,47 @@ test_expect_success 'setup' ' ' test_expect_success 'checkout -b to a new branch, set to HEAD' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && do_checkout branch2 ' -test_expect_success 'checkout -b to a new branch, set to an explicit ref' ' - git checkout branch1 && - git branch -D branch2 && +test_expect_success 'checkout -b to a merge base' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && + git checkout -b branch2 branch1... +' +test_expect_success 'checkout -b to a new branch, set to an explicit ref' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && do_checkout branch2 $HEAD1 ' test_expect_success 'checkout -b to a new branch with unmergeable changes fails' ' - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && - setup_dirty_unmergeable && - test_must_fail do_checkout branch2 $HEAD1 && + do_checkout ! branch2 $HEAD1 && test_dirty_unmergeable ' test_expect_success 'checkout -f -b to a new branch with unmergeable changes discards changes' ' + test_when_finished " + git checkout branch1 && + test_might_fail git branch -D branch2" && + # still dirty and on branch1 do_checkout branch2 $HEAD1 "-f -b" && - test_must_fail test_dirty_unmergeable + test_dirty_unmergeable_discards_changes ' test_expect_success 'checkout -b to a new branch preserves mergeable changes' ' - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && + test_when_finished " + git reset --hard && + git checkout branch1 && + test_might_fail git branch -D branch2" && setup_dirty_mergeable && do_checkout branch2 $HEAD1 && @@ -99,27 +134,18 @@ test_expect_success 'checkout -b to a new branch preserves mergeable changes' ' ' test_expect_success 'checkout -f -b to a new branch with mergeable changes discards changes' ' - # clean up from previous test - git reset --hard && - - git checkout branch1 && - - # clean up from previous test - git branch -D branch2 && - + test_when_finished git reset --hard HEAD && setup_dirty_mergeable && do_checkout branch2 $HEAD1 "-f -b" && - test_must_fail test_dirty_mergeable + test_dirty_mergeable_discards_changes ' test_expect_success 'checkout -b to an existing branch fails' ' - git reset --hard HEAD && - - test_must_fail do_checkout branch2 $HEAD2 + test_when_finished git reset --hard HEAD && + do_checkout ! branch2 $HEAD2 ' test_expect_success 'checkout -b to @{-1} fails with the right branch name' ' - git reset --hard HEAD && git checkout branch1 && git checkout branch2 && echo >expect "fatal: A branch named '\''branch1'\'' already exists." && @@ -133,8 +159,15 @@ test_expect_success 'checkout -B to an existing branch resets branch to HEAD' ' do_checkout branch2 "" -B ' +test_expect_success 'checkout -B to a merge base' ' + git checkout branch1 && + + git checkout -B branch2 branch1... +' + test_expect_success 'checkout -B to an existing branch from detached HEAD resets branch to HEAD' ' - git checkout $(git rev-parse --verify HEAD) && + head=$(git rev-parse --verify HEAD) && + git checkout "$head" && do_checkout branch2 "" -B ' @@ -149,17 +182,18 @@ test_expect_success 'checkout -B to an existing branch with unmergeable changes git checkout branch1 && setup_dirty_unmergeable && - test_must_fail do_checkout branch2 $HEAD1 -B && + do_checkout ! branch2 $HEAD1 -B && test_dirty_unmergeable ' test_expect_success 'checkout -f -B to an existing branch with unmergeable changes discards changes' ' # still dirty and on branch1 do_checkout branch2 $HEAD1 "-f -B" && - test_must_fail test_dirty_unmergeable + test_dirty_unmergeable_discards_changes ' test_expect_success 'checkout -B to an existing branch preserves mergeable changes' ' + test_when_finished git reset --hard && git checkout branch1 && setup_dirty_mergeable && @@ -168,14 +202,11 @@ test_expect_success 'checkout -B to an existing branch preserves mergeable chang ' test_expect_success 'checkout -f -B to an existing branch with mergeable changes discards changes' ' - # clean up from previous test - git reset --hard && - git checkout branch1 && setup_dirty_mergeable && do_checkout branch2 $HEAD1 "-f -B" && - test_must_fail test_dirty_mergeable + test_dirty_mergeable_discards_changes ' test_expect_success 'checkout -b <describe>' ' @@ -198,4 +229,13 @@ test_expect_success 'checkout -B to the current branch works' ' test_dirty_mergeable ' +test_expect_success 'checkout -b after clone --no-checkout does a checkout of HEAD' ' + git init src && + test_commit -C src a && + rev="$(git -C src rev-parse HEAD)" && + git clone --no-checkout src dest && + git -C dest checkout "$rev" -b branch && + test_path_is_file dest/a.t +' + test_done diff --git a/t/t2020-checkout-detach.sh b/t/t2020-checkout-detach.sh index 1fa6706..b748db9 100755 --- a/t/t2020-checkout-detach.sh +++ b/t/t2020-checkout-detach.sh @@ -195,16 +195,22 @@ test_expect_success 'describe_detached_head prints no SHA-1 ellipsis when not as # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: - git checkout -b <new-branch-name> + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - + + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit three EOF @@ -271,16 +277,22 @@ test_expect_success 'describe_detached_head does print SHA-1 ellipsis when asked # The first detach operation is more chatty than the following ones. cat >1st_detach <<-EOF && - Note: checking out 'HEAD^'. + Note: switching to 'HEAD^'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this - state without impacting any branches by performing another checkout. + state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may - do so (now or later) by using -b with the checkout command again. Example: + do so (now or later) by using -c with the switch command. Example: + + git switch -c <new-branch-name> + + Or undo this operation with: + + git switch - - git checkout -b <new-branch-name> + Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at \$commit... three EOF diff --git a/t/t2022-checkout-paths.sh b/t/t2022-checkout-paths.sh index fc3eb43..6844afa 100755 --- a/t/t2022-checkout-paths.sh +++ b/t/t2022-checkout-paths.sh @@ -78,4 +78,15 @@ test_expect_success 'do not touch files that are already up-to-date' ' test_cmp expect actual ' +test_expect_success 'checkout HEAD adds deleted intent-to-add file back to index' ' + echo "nonempty" >nonempty && + >empty && + git add nonempty empty && + git commit -m "create files to be deleted" && + git rm --cached nonempty empty && + git add -N nonempty empty && + git checkout HEAD nonempty empty && + git diff --cached --exit-code +' + test_done diff --git a/t/t2023-checkout-m.sh b/t/t2023-checkout-m.sh index 7e18985..fca3f85 100755 --- a/t/t2023-checkout-m.sh +++ b/t/t2023-checkout-m.sh @@ -46,4 +46,28 @@ test_expect_success '-m restores 3-way conflicted+resolved file' ' test_cmp both.txt.conflicted.cleaned both.txt.cleaned ' +test_expect_success 'force checkout a conflict file creates stage zero entry' ' + git init co-force && + ( + cd co-force && + echo a >a && + git add a && + git commit -ama && + A_OBJ=$(git rev-parse :a) && + git branch topic && + echo b >a && + git commit -amb && + B_OBJ=$(git rev-parse :a) && + git checkout topic && + echo c >a && + C_OBJ=$(git hash-object a) && + git checkout -m master && + test_cmp_rev :1:a $A_OBJ && + test_cmp_rev :2:a $B_OBJ && + test_cmp_rev :3:a $C_OBJ && + git checkout -f topic && + test_cmp_rev :0:a $A_OBJ + ) +' + test_done diff --git a/t/t2024-checkout-dwim.sh b/t/t2024-checkout-dwim.sh index 69b6774..accfa9a 100755 --- a/t/t2024-checkout-dwim.sh +++ b/t/t2024-checkout-dwim.sh @@ -37,7 +37,9 @@ test_expect_success 'setup' ' git checkout -b foo && test_commit a_foo && git checkout -b bar && - test_commit a_bar + test_commit a_bar && + git checkout -b ambiguous_branch_and_file && + test_commit a_ambiguous_branch_and_file ) && git init repo_b && ( @@ -46,7 +48,9 @@ test_expect_success 'setup' ' git checkout -b foo && test_commit b_foo && git checkout -b baz && - test_commit b_baz + test_commit b_baz && + git checkout -b ambiguous_branch_and_file && + test_commit b_ambiguous_branch_and_file ) && git remote add repo_a repo_a && git remote add repo_b repo_b && @@ -75,6 +79,26 @@ test_expect_success 'checkout of branch from multiple remotes fails #1' ' test_branch master ' +test_expect_success 'when arg matches multiple remotes, do not fallback to interpreting as pathspec' ' + # create a file with name matching remote branch name + git checkout -b t_ambiguous_branch_and_file && + >ambiguous_branch_and_file && + git add ambiguous_branch_and_file && + git commit -m "ambiguous_branch_and_file" && + + # modify file to verify that it will not be touched by checkout + test_when_finished "git checkout -- ambiguous_branch_and_file" && + echo "file contents" >ambiguous_branch_and_file && + cp ambiguous_branch_and_file expect && + + test_must_fail git checkout ambiguous_branch_and_file 2>err && + + test_i18ngrep "matched multiple (2) remote tracking branches" err && + + # file must not be altered + test_cmp expect ambiguous_branch_and_file +' + test_expect_success 'checkout of branch from multiple remotes fails with advice' ' git checkout -B master && test_might_fail git branch -D foo && @@ -278,4 +302,35 @@ test_expect_success 'loosely defined local base branch is reported correctly' ' test_cmp expect actual ' +test_expect_success 'reject when arg could be part of dwim branch' ' + git remote add foo file://non-existent-place && + git update-ref refs/remotes/foo/dwim-arg HEAD && + echo foo >dwim-arg && + git add dwim-arg && + echo bar >dwim-arg && + test_must_fail git checkout dwim-arg && + test_must_fail git rev-parse refs/heads/dwim-arg -- && + grep bar dwim-arg +' + +test_expect_success 'disambiguate dwim branch and checkout path (1)' ' + git update-ref refs/remotes/foo/dwim-arg1 HEAD && + echo foo >dwim-arg1 && + git add dwim-arg1 && + echo bar >dwim-arg1 && + git checkout -- dwim-arg1 && + test_must_fail git rev-parse refs/heads/dwim-arg1 -- && + grep foo dwim-arg1 +' + +test_expect_success 'disambiguate dwim branch and checkout path (2)' ' + git update-ref refs/remotes/foo/dwim-arg2 HEAD && + echo foo >dwim-arg2 && + git add dwim-arg2 && + echo bar >dwim-arg2 && + git checkout dwim-arg2 -- && + git rev-parse refs/heads/dwim-arg2 -- && + grep bar dwim-arg2 +' + test_done diff --git a/t/t2025-checkout-no-overlay.sh b/t/t2025-checkout-no-overlay.sh new file mode 100755 index 0000000..76330cb --- /dev/null +++ b/t/t2025-checkout-no-overlay.sh @@ -0,0 +1,47 @@ +#!/bin/sh + +test_description='checkout --no-overlay <tree-ish> -- <pathspec>' + +. ./test-lib.sh + +test_expect_success 'setup' ' + git commit --allow-empty -m "initial" +' + +test_expect_success 'checkout --no-overlay deletes files not in <tree-ish>' ' + >file && + mkdir dir && + >dir/file1 && + git add file dir/file1 && + git checkout --no-overlay HEAD -- file && + test_path_is_missing file && + test_path_is_file dir/file1 +' + +test_expect_success 'checkout --no-overlay removing last file from directory' ' + git checkout --no-overlay HEAD -- dir/file1 && + test_path_is_missing dir +' + +test_expect_success 'checkout -p --overlay is disallowed' ' + test_must_fail git checkout -p --overlay HEAD 2>actual && + test_i18ngrep "fatal: -p and --overlay are mutually exclusive" actual +' + +test_expect_success '--no-overlay --theirs with D/F conflict deletes file' ' + test_commit file1 file1 && + test_commit file2 file2 && + git rm --cached file1 && + echo 1234 >file1 && + F1=$(git rev-parse HEAD:file1) && + F2=$(git rev-parse HEAD:file2) && + { + echo "100644 $F1 1 file1" && + echo "100644 $F2 2 file1" + } | git update-index --index-info && + test_path_is_file file1 && + git checkout --theirs --no-overlay -- file1 && + test_path_is_missing file1 +' + +test_done diff --git a/t/t2026-checkout-pathspec-file.sh b/t/t2026-checkout-pathspec-file.sh new file mode 100755 index 0000000..43d31d7 --- /dev/null +++ b/t/t2026-checkout-pathspec-file.sh @@ -0,0 +1,163 @@ +#!/bin/sh + +test_description='checkout --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + + echo 1 >fileA.t && + echo 1 >fileB.t && + echo 1 >fileC.t && + echo 1 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 1" && + + echo 2 >fileA.t && + echo 2 >fileB.t && + echo 2 >fileC.t && + echo 2 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 2" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git checkout --pathspec-from-file=list HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git checkout --pathspec-from-file=- --pathspec-file-nul HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git checkout --pathspec-from-file=list HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git checkout --pathspec-from-file=list --pathspec-file-nul HEAD^1 +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git checkout --pathspec-from-file=- HEAD^1 && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + + test_must_fail git checkout --pathspec-from-file=list --detach 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --detach" err && + + test_must_fail git checkout --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git checkout --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git checkout --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err +' + +test_done diff --git a/t/t2060-switch.sh b/t/t2060-switch.sh new file mode 100755 index 0000000..f9efa29 --- /dev/null +++ b/t/t2060-switch.sh @@ -0,0 +1,96 @@ +#!/bin/sh + +test_description='switch basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + git branch first-branch && + test_commit second && + test_commit third && + git remote add origin nohost:/nopath && + git update-ref refs/remotes/origin/foo first-branch +' + +test_expect_success 'switch branch no arguments' ' + test_must_fail git switch +' + +test_expect_success 'switch branch' ' + git switch first-branch && + test_path_is_missing second.t +' + +test_expect_success 'switch and detach' ' + test_when_finished git switch master && + test_must_fail git switch master^{commit} && + git switch --detach master^{commit} && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and detach current branch' ' + test_when_finished git switch master && + git switch master && + git switch --detach && + test_must_fail git symbolic-ref HEAD +' + +test_expect_success 'switch and create branch' ' + test_when_finished git switch master && + git switch -c temp master^ && + test_cmp_rev master^ refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'force create branch from HEAD' ' + test_when_finished git switch master && + git switch --detach master && + test_must_fail git switch -c temp && + git switch -C temp && + test_cmp_rev master refs/heads/temp && + echo refs/heads/temp >expected-branch && + git symbolic-ref HEAD >actual-branch && + test_cmp expected-branch actual-branch +' + +test_expect_success 'new orphan branch from empty' ' + test_when_finished git switch master && + test_must_fail git switch --orphan new-orphan HEAD && + git switch --orphan new-orphan && + test_commit orphan && + git cat-file commit refs/heads/new-orphan >commit && + ! grep ^parent commit && + git ls-files >tracked-files && + echo orphan.t >expected && + test_cmp expected tracked-files +' + +test_expect_success 'switching ignores file of same branch name' ' + test_when_finished git switch master && + : >first-branch && + git switch first-branch && + echo refs/heads/first-branch >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'guess and create branch ' ' + test_when_finished git switch master && + test_must_fail git switch --no-guess foo && + git switch foo && + echo refs/heads/foo >expected && + git symbolic-ref HEAD >actual && + test_cmp expected actual +' + +test_expect_success 'not switching when something is in progress' ' + test_when_finished rm -f .git/MERGE_HEAD && + # fake a merge-in-progress + cp .git/HEAD .git/MERGE_HEAD && + test_must_fail git switch -d @^ +' + +test_done diff --git a/t/t2070-restore.sh b/t/t2070-restore.sh new file mode 100755 index 0000000..076d0df --- /dev/null +++ b/t/t2070-restore.sh @@ -0,0 +1,126 @@ +#!/bin/sh + +test_description='restore basic functionality' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit first && + echo first-and-a-half >>first.t && + git add first.t && + test_commit second && + echo one >one && + echo two >two && + echo untracked >untracked && + echo ignored >ignored && + echo /ignored >.gitignore && + git add one two .gitignore && + git update-ref refs/heads/one master +' + +test_expect_success 'restore without pathspec is not ok' ' + test_must_fail git restore && + test_must_fail git restore --source=first +' + +test_expect_success 'restore a file, ignoring branch of same name' ' + cat one >expected && + echo dirty >>one && + git restore one && + test_cmp expected one +' + +test_expect_success 'restore a file on worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first first.t && + test_cmp expected first.t && + git cat-file blob HEAD:./first.t >expected && + git show :first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore a file in the index from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged first.t && + git show :first.t >actual && + test_cmp expected actual && + git cat-file blob HEAD:./first.t >expected && + test_cmp expected first.t +' + +test_expect_success 'restore a file in both the index and worktree from another ref' ' + test_when_finished git reset --hard && + git cat-file blob first:./first.t >expected && + git restore --source=first --staged --worktree first.t && + git show :first.t >actual && + test_cmp expected actual && + test_cmp expected first.t +' + +test_expect_success 'restore --staged uses HEAD as source' ' + test_when_finished git reset --hard && + git cat-file blob :./first.t >expected && + echo index-dirty >>first.t && + git add first.t && + git restore --staged first.t && + git cat-file blob :./first.t >actual && + test_cmp expected actual +' + +test_expect_success 'restore --ignore-unmerged ignores unmerged entries' ' + git init unmerged && + ( + cd unmerged && + echo one >unmerged && + echo one >common && + git add unmerged common && + git commit -m common && + git switch -c first && + echo first >unmerged && + git commit -am first && + git switch -c second master && + echo second >unmerged && + git commit -am second && + test_must_fail git merge first && + + echo dirty >>common && + test_must_fail git restore . && + + git restore --ignore-unmerged --quiet . >output 2>&1 && + git diff common >diff-output && + test_must_be_empty output && + test_must_be_empty diff-output + ) +' + +test_expect_success 'restore --staged adds deleted intent-to-add file back to index' ' + echo "nonempty" >nonempty && + >empty && + git add nonempty empty && + git commit -m "create files to be deleted" && + git rm --cached nonempty empty && + git add -N nonempty empty && + git restore --staged nonempty empty && + git diff --cached --exit-code +' + +test_expect_success 'restore --staged invalidates cache tree for deletions' ' + test_when_finished git reset --hard && + >new1 && + >new2 && + git add new1 new2 && + + # It is important to commit and then reset here, so that the index + # contains a valid cache-tree for the "both" tree. + git commit -m both && + git reset --soft HEAD^ && + + git restore --staged new1 && + git commit -m "just new2" && + git rev-parse HEAD:new2 && + test_must_fail git rev-parse HEAD:new1 +' + +test_done diff --git a/t/t2071-restore-patch.sh b/t/t2071-restore-patch.sh new file mode 100755 index 0000000..98b2476 --- /dev/null +++ b/t/t2071-restore-patch.sh @@ -0,0 +1,110 @@ +#!/bin/sh + +test_description='git restore --patch' + +. ./lib-patch-mode.sh + +test_expect_success PERL 'setup' ' + mkdir dir && + echo parent >dir/foo && + echo dummy >bar && + git add bar dir/foo && + git commit -m initial && + test_tick && + test_commit second dir/foo head && + set_and_save_state bar bar_work bar_index && + save_head +' + +test_expect_success PERL 'restore -p without pathspec is fine' ' + echo q >cmd && + git restore -p <cmd +' + +# note: bar sorts before dir/foo, so the first 'n' is always to skip 'bar' + +test_expect_success PERL 'saying "n" does nothing' ' + set_and_save_state dir/foo work head && + test_write_lines n n | git restore -p && + verify_saved_state bar && + verify_saved_state dir/foo +' + +test_expect_success PERL 'git restore -p' ' + set_and_save_state dir/foo work head && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'git restore -p with staged changes' ' + set_state dir/foo work index && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +test_expect_success PERL 'git restore -p --source=HEAD' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD && + verify_saved_state bar && + verify_state dir/foo head index +' + +test_expect_success PERL 'git restore -p --source=HEAD^' ' + set_state dir/foo work index && + # the third n is to get out in case it mistakenly does not apply + test_write_lines n y n | git restore -p --source=HEAD^ && + verify_saved_state bar && + verify_state dir/foo parent index +' + +test_expect_success PERL 'git restore -p handles deletion' ' + set_state dir/foo work index && + rm dir/foo && + test_write_lines n y | git restore -p && + verify_saved_state bar && + verify_state dir/foo index index +' + +# The idea in the rest is that bar sorts first, so we always say 'y' +# first and if the path limiter fails it'll apply to bar instead of +# dir/foo. There's always an extra 'n' to reject edits to dir/foo in +# the failure case (and thus get out of the loop). + +test_expect_success PERL 'path limiting works: dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: -- dir' ' + set_state dir/foo work head && + test_write_lines y n | git restore -p -- dir && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'path limiting works: HEAD^ -- dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | git restore -p --source=HEAD^ -- dir && + verify_saved_state bar && + verify_state dir/foo parent head +' + +test_expect_success PERL 'path limiting works: foo inside dir' ' + set_state dir/foo work head && + # the third n is to get out in case it mistakenly does not apply + test_write_lines y n n | (cd dir && git restore -p foo) && + verify_saved_state bar && + verify_state dir/foo head head +' + +test_expect_success PERL 'none of this moved HEAD' ' + verify_saved_head +' + +test_done diff --git a/t/t2072-restore-pathspec-file.sh b/t/t2072-restore-pathspec-file.sh new file mode 100755 index 0000000..0d47946 --- /dev/null +++ b/t/t2072-restore-pathspec-file.sh @@ -0,0 +1,164 @@ +#!/bin/sh + +test_description='restore --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + + echo 1 >fileA.t && + echo 1 >fileB.t && + echo 1 >fileC.t && + echo 1 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 1" && + + echo 2 >fileA.t && + echo 2 >fileB.t && + echo 2 >fileC.t && + echo 2 >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files 2" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git restore --pathspec-from-file=list --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git restore --pathspec-from-file=- --pathspec-file-nul --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git restore --pathspec-from-file=list --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git restore --pathspec-from-file=list --pathspec-file-nul --source=HEAD^1 +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git restore --pathspec-from-file=- --source=HEAD^1 && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git restore --pathspec-from-file=list --patch --source=HEAD^1 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git restore --pathspec-from-file=list --source=HEAD^1 -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git restore --pathspec-file-nul --source=HEAD^1 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git restore --pathspec-from-file=empty_list --source=HEAD^1 2>err && + test_i18ngrep -e "you must specify path(s) to restore" err +' + +test_done diff --git a/t/t2107-update-index-basic.sh b/t/t2107-update-index-basic.sh index 2242cd0..a30b7ca 100755 --- a/t/t2107-update-index-basic.sh +++ b/t/t2107-update-index-basic.sh @@ -9,7 +9,6 @@ Tests for command-line parsing and basic operation. test_expect_success 'update-index --nonsense fails' ' test_must_fail git update-index --nonsense 2>msg && - cat msg && test -s msg ' diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 68e54d5..5bbe8dc 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -247,12 +247,14 @@ test_expect_success 'diff-files/diff-cached shows ita as new/not-new files' ' test_expect_success '"diff HEAD" includes ita as new files' ' git reset --hard && echo new >new-ita && + oid=$(git hash-object new-ita) && + oid=$(git rev-parse --short $oid) && git add -N new-ita && git diff HEAD >actual && - cat >expected <<-\EOF && + cat >expected <<-EOF && diff --git a/new-ita b/new-ita new file mode 100644 - index 0000000..3e75765 + index 0000000..$oid --- /dev/null +++ b/new-ita @@ -0,0 +1 @@ diff --git a/t/t2025-worktree-add.sh b/t/t2400-worktree-add.sh index 286bba3..5a74954 100755 --- a/t/t2025-worktree-add.sh +++ b/t/t2400-worktree-add.sh @@ -438,7 +438,7 @@ test_expect_success 'git worktree add does not match remote' ' cd foo && test_must_fail git config "branch.foo.remote" && test_must_fail git config "branch.foo.merge" && - ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + test_cmp_rev ! refs/remotes/repo_a/foo refs/heads/foo ) ' @@ -483,7 +483,7 @@ test_expect_success 'git worktree --no-guess-remote option overrides config' ' cd foo && test_must_fail git config "branch.foo.remote" && test_must_fail git config "branch.foo.merge" && - ! test_cmp_rev refs/remotes/repo_a/foo refs/heads/foo + test_cmp_rev ! refs/remotes/repo_a/foo refs/heads/foo ) ' @@ -570,4 +570,54 @@ test_expect_success '"add" an existing locked but missing worktree' ' git worktree add --force --force --detach gnoo ' +test_expect_success '"add" not tripped up by magic worktree matching"' ' + # if worktree "sub1/bar" exists, "git worktree add bar" in distinct + # directory `sub2` should not mistakenly complain that `bar` is an + # already-registered worktree + mkdir sub1 sub2 && + git -C sub1 --git-dir=../.git worktree add --detach bozo && + git -C sub2 --git-dir=../.git worktree add --detach bozo +' + +test_expect_success FUNNYNAMES 'sanitize generated worktree name' ' + git worktree add --detach ". weird*..?.lock.lock" && + test -d .git/worktrees/---weird-.- +' + +test_expect_success '"add" should not fail because of another bad worktree' ' + git init add-fail && + ( + cd add-fail && + test_commit first && + mkdir sub && + git worktree add sub/to-be-deleted && + rm -rf sub && + git worktree add second + ) +' + +test_expect_success '"add" with uninitialized submodule, with submodule.recurse unset' ' + test_create_repo submodule && + test_commit -C submodule first && + test_create_repo project && + git -C project submodule add ../submodule && + git -C project add submodule && + test_tick && + git -C project commit -m add_sub && + git clone project project-clone && + git -C project-clone worktree add ../project-2 +' +test_expect_success '"add" with uninitialized submodule, with submodule.recurse set' ' + git -C project-clone -c submodule.recurse worktree add ../project-3 +' + +test_expect_success '"add" with initialized submodule, with submodule.recurse unset' ' + git -C project-clone submodule update --init && + git -C project-clone worktree add ../project-4 +' + +test_expect_success '"add" with initialized submodule, with submodule.recurse set' ' + git -C project-clone -c submodule.recurse worktree add ../project-5 +' + test_done diff --git a/t/t2026-worktree-prune.sh b/t/t2401-worktree-prune.sh index b7d6d5d..b7d6d5d 100755 --- a/t/t2026-worktree-prune.sh +++ b/t/t2401-worktree-prune.sh diff --git a/t/t2027-worktree-list.sh b/t/t2402-worktree-list.sh index bb6fb9b..69ffe86 100755 --- a/t/t2027-worktree-list.sh +++ b/t/t2402-worktree-list.sh @@ -151,4 +151,10 @@ test_expect_success 'linked worktrees are sorted' ' test_cmp expected sorted/main/actual ' +test_expect_success 'worktree path when called in .git directory' ' + git worktree list >list1&& + git -C .git worktree list >list2 && + test_cmp list1 list2 +' + test_done diff --git a/t/t2028-worktree-move.sh b/t/t2403-worktree-move.sh index 33c0337..939d18d 100755 --- a/t/t2028-worktree-move.sh +++ b/t/t2403-worktree-move.sh @@ -112,6 +112,26 @@ test_expect_success 'move locked worktree (force)' ' git worktree move --force --force flump ploof ' +test_expect_success 'move a repo with uninitialized submodule' ' + git init withsub && + ( + cd withsub && + test_commit initial && + git submodule add "$PWD"/.git sub && + git commit -m withsub && + git worktree add second HEAD && + git worktree move second third + ) +' + +test_expect_success 'not move a repo with initialized submodule' ' + ( + cd withsub && + git -C third submodule update && + test_must_fail git worktree move third forth + ) +' + test_expect_success 'remove main worktree' ' test_must_fail git worktree remove . ' @@ -185,4 +205,21 @@ test_expect_success 'remove cleans up .git/worktrees when empty' ' ) ' +test_expect_success 'remove a repo with uninitialized submodule' ' + ( + cd withsub && + git worktree add to-remove HEAD && + git worktree remove to-remove + ) +' + +test_expect_success 'not remove a repo with initialized submodule' ' + ( + cd withsub && + git worktree add to-remove HEAD && + git -C to-remove submodule update && + test_must_fail git worktree remove to-remove + ) +' + test_done diff --git a/t/t2029-worktree-config.sh b/t/t2404-worktree-config.sh index 286121d..286121d 100755 --- a/t/t2029-worktree-config.sh +++ b/t/t2404-worktree-config.sh diff --git a/t/t2405-worktree-submodule.sh b/t/t2405-worktree-submodule.sh new file mode 100755 index 0000000..e1b2bfd --- /dev/null +++ b/t/t2405-worktree-submodule.sh @@ -0,0 +1,90 @@ +#!/bin/sh + +test_description='Combination of submodules and multiple worktrees' + +. ./test-lib.sh + +base_path=$(pwd -P) + +test_expect_success 'setup: create origin repos' ' + git init origin/sub && + test_commit -C origin/sub file1 && + git init origin/main && + test_commit -C origin/main first && + git -C origin/main submodule add ../sub && + git -C origin/main commit -m "add sub" && + test_commit -C origin/sub "file1 updated" file1 file1updated file1updated && + git -C origin/main/sub pull && + git -C origin/main add sub && + git -C origin/main commit -m "sub updated" +' + +test_expect_success 'setup: clone superproject to create main worktree' ' + git clone --recursive "$base_path/origin/main" main +' + +rev1_hash_main=$(git --git-dir=origin/main/.git show --pretty=format:%h -q "HEAD~1") +rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1") + +test_expect_success 'add superproject worktree' ' + git -C main worktree add "$base_path/worktree" "$rev1_hash_main" +' + +test_expect_failure 'submodule is checked out just after worktree add' ' + git -C worktree diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'add superproject worktree and initialize submodules' ' + git -C main worktree add "$base_path/worktree-submodule-update" "$rev1_hash_main" && + git -C worktree-submodule-update submodule update +' + +test_expect_success 'submodule is checked out just after submodule update in linked worktree' ' + git -C worktree-submodule-update diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'add superproject worktree and manually add submodule worktree' ' + git -C main worktree add "$base_path/linked_submodule" "$rev1_hash_main" && + git -C main/sub worktree add "$base_path/linked_submodule/sub" "$rev1_hash_sub" +' + +test_expect_success 'submodule is checked out after manually adding submodule worktree' ' + git -C linked_submodule diff --submodule master"^!" >out && + grep "file1 updated" out +' + +test_expect_success 'checkout --recurse-submodules uses $GIT_DIR for submodules in a linked worktree' ' + git -C main worktree add "$base_path/checkout-recurse" --detach && + git -C checkout-recurse submodule update --init && + echo "gitdir: ../../main/.git/worktrees/checkout-recurse/modules/sub" >expect-gitfile && + cat checkout-recurse/sub/.git >actual-gitfile && + test_cmp expect-gitfile actual-gitfile && + git -C main/sub rev-parse HEAD >expect-head-main && + git -C checkout-recurse checkout --recurse-submodules HEAD~1 && + cat checkout-recurse/sub/.git >actual-gitfile && + git -C main/sub rev-parse HEAD >actual-head-main && + test_cmp expect-gitfile actual-gitfile && + test_cmp expect-head-main actual-head-main +' + +test_expect_success 'core.worktree is removed in $GIT_DIR/modules/<name>/config, not in $GIT_COMMON_DIR/modules/<name>/config' ' + echo "../../../sub" >expect-main && + git -C main/sub config --get core.worktree >actual-main && + test_cmp expect-main actual-main && + echo "../../../../../../checkout-recurse/sub" >expect-linked && + git -C checkout-recurse/sub config --get core.worktree >actual-linked && + test_cmp expect-linked actual-linked && + git -C checkout-recurse checkout --recurse-submodules first && + test_expect_code 1 git -C main/.git/worktrees/checkout-recurse/modules/sub config --get core.worktree >linked-config && + test_must_be_empty linked-config && + git -C main/sub config --get core.worktree >actual-main && + test_cmp expect-main actual-main +' + +test_expect_success 'unsetting core.worktree does not prevent running commands directly against the submodule repository' ' + git -C main/.git/worktrees/checkout-recurse/modules/sub log +' + +test_done diff --git a/t/t3000-ls-files-others.sh b/t/t3000-ls-files-others.sh index afd4756..0aefada 100755 --- a/t/t3000-ls-files-others.sh +++ b/t/t3000-ls-files-others.sh @@ -3,7 +3,7 @@ # Copyright (c) 2005 Junio C Hamano # -test_description='git ls-files test (--others should pick up symlinks). +test_description='basic tests for ls-files --others This test runs git ls-files --others with the following on the filesystem. diff --git a/t/t3005-ls-files-relative.sh b/t/t3005-ls-files-relative.sh index 209b4c7..2ec69a8 100755 --- a/t/t3005-ls-files-relative.sh +++ b/t/t3005-ls-files-relative.sh @@ -7,10 +7,6 @@ This test runs git ls-files with various relative path arguments. . ./test-lib.sh -new_line=' -' -sq=\' - test_expect_success 'prepare' ' : >never-mind-me && git add never-mind-me && @@ -44,9 +40,9 @@ test_expect_success 'ls-files -c' ' cd top/sub && for f in ../y* do - echo "error: pathspec $sq$f$sq did not match any file(s) known to git" + echo "error: pathspec $SQ$f$SQ did not match any file(s) known to git" done >expect.err && - echo "Did you forget to ${sq}git add${sq}?" >>expect.err && + echo "Did you forget to ${SQ}git add${SQ}?" >>expect.err && ls ../x* >expect.out && test_must_fail git ls-files -c --error-unmatch ../[xy]* >actual.out 2>actual.err && test_cmp expect.out actual.out && @@ -59,9 +55,9 @@ test_expect_success 'ls-files -o' ' cd top/sub && for f in ../x* do - echo "error: pathspec $sq$f$sq did not match any file(s) known to git" + echo "error: pathspec $SQ$f$SQ did not match any file(s) known to git" done >expect.err && - echo "Did you forget to ${sq}git add${sq}?" >>expect.err && + echo "Did you forget to ${SQ}git add${SQ}?" >>expect.err && ls ../y* >expect.out && test_must_fail git ls-files -o --error-unmatch ../[xy]* >actual.out 2>actual.err && test_cmp expect.out actual.out && diff --git a/t/t3007-ls-files-recurse-submodules.sh b/t/t3007-ls-files-recurse-submodules.sh index 318b5bc..4a08000 100755 --- a/t/t3007-ls-files-recurse-submodules.sh +++ b/t/t3007-ls-files-recurse-submodules.sh @@ -130,7 +130,6 @@ test_expect_success '--recurse-submodules and pathspecs setup' ' git ls-files --recurse-submodules >actual && test_cmp expect actual && - cat actual && git ls-files --recurse-submodules "*" >actual && test_cmp expect actual ' diff --git a/t/t3008-ls-files-lazy-init-name-hash.sh b/t/t3008-ls-files-lazy-init-name-hash.sh index 64f0473..85f3704 100755 --- a/t/t3008-ls-files-lazy-init-name-hash.sh +++ b/t/t3008-ls-files-lazy-init-name-hash.sh @@ -4,7 +4,7 @@ test_description='Test the lazy init name hash with various folder structures' . ./test-lib.sh -if test 1 -eq $($GIT_BUILD_DIR/t/helper/test-tool online-cpus) +if test 1 -eq $(test-tool online-cpus) then skip_all='skipping lazy-init tests, single cpu' test_done diff --git a/t/t3009-ls-files-others-nonsubmodule.sh b/t/t3009-ls-files-others-nonsubmodule.sh new file mode 100755 index 0000000..963f346 --- /dev/null +++ b/t/t3009-ls-files-others-nonsubmodule.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +test_description='test git ls-files --others with non-submodule repositories + +This test runs git ls-files --others with the following working tree: + + nonrepo-no-files/ + plain directory with no files + nonrepo-untracked-file/ + plain directory with an untracked file + repo-no-commit-no-files/ + git repository without a commit or a file + repo-no-commit-untracked-file/ + git repository without a commit but with an untracked file + repo-with-commit-no-files/ + git repository with a commit and no untracked files + repo-with-commit-untracked-file/ + git repository with a commit and an untracked file +' + +. ./test-lib.sh + +test_expect_success 'setup: directories' ' + mkdir nonrepo-no-files/ && + mkdir nonrepo-untracked-file && + : >nonrepo-untracked-file/untracked && + git init repo-no-commit-no-files && + git init repo-no-commit-untracked-file && + : >repo-no-commit-untracked-file/untracked && + git init repo-with-commit-no-files && + git -C repo-with-commit-no-files commit --allow-empty -mmsg && + git init repo-with-commit-untracked-file && + test_commit -C repo-with-commit-untracked-file msg && + : >repo-with-commit-untracked-file/untracked +' + +test_expect_success 'ls-files --others handles untracked git repositories' ' + git ls-files -o >output && + cat >expect <<-EOF && + nonrepo-untracked-file/untracked + output + repo-no-commit-no-files/ + repo-no-commit-untracked-file/ + repo-with-commit-no-files/ + repo-with-commit-untracked-file/ + EOF + test_cmp expect output +' + +test_done diff --git a/t/t3011-common-prefixes-and-directory-traversal.sh b/t/t3011-common-prefixes-and-directory-traversal.sh new file mode 100755 index 0000000..3da5b2b --- /dev/null +++ b/t/t3011-common-prefixes-and-directory-traversal.sh @@ -0,0 +1,209 @@ +#!/bin/sh + +test_description='directory traversal handling, especially with common prefixes' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit hello && + + >empty && + mkdir untracked_dir && + >untracked_dir/empty && + git init untracked_repo && + >untracked_repo/empty && + + cat <<-EOF >.gitignore && + ignored + an_ignored_dir/ + EOF + mkdir an_ignored_dir && + mkdir an_untracked_dir && + >an_ignored_dir/ignored && + >an_ignored_dir/untracked && + >an_untracked_dir/ignored && + >an_untracked_dir/untracked +' + +test_expect_success 'git ls-files -o shows the right entries' ' + cat <<-EOF >expect && + .gitignore + actual + an_ignored_dir/ignored + an_ignored_dir/untracked + an_untracked_dir/ignored + an_untracked_dir/untracked + empty + expect + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --exclude-standard shows the right entries' ' + cat <<-EOF >expect && + .gitignore + actual + an_untracked_dir/untracked + empty + expect + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o --exclude-standard >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir recurses' ' + echo untracked_dir/empty >expect && + git ls-files -o untracked_dir >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir/ recurses' ' + echo untracked_dir/empty >expect && + git ls-files -o untracked_dir/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir does not recurse' ' + echo untracked_dir/ >expect && + git ls-files -o --directory untracked_dir >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir/ does not recurse' ' + echo untracked_dir/ >expect && + git ls-files -o --directory untracked_dir/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_repo does not recurse' ' + echo untracked_repo/ >expect && + git ls-files -o untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_repo/ does not recurse' ' + echo untracked_repo/ >expect && + git ls-files -o untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir untracked_repo recurses into untracked_dir only' ' + cat <<-EOF >expect && + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o untracked_dir untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o untracked_dir/ untracked_repo/ recurses into untracked_dir only' ' + cat <<-EOF >expect && + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o untracked_dir/ untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir untracked_repo does not recurse' ' + cat <<-EOF >expect && + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory untracked_dir untracked_repo >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o --directory untracked_dir/ untracked_repo/ does not recurse' ' + cat <<-EOF >expect && + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory untracked_dir/ untracked_repo/ >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o .git shows nothing' ' + git ls-files -o .git >actual && + test_must_be_empty actual +' + +test_expect_success 'git ls-files -o .git/ shows nothing' ' + git ls-files -o .git/ >actual && + test_must_be_empty actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o untracked_* recurses appropriately' ' + mkdir "untracked_*" && + >"untracked_*/empty" && + + cat <<-EOF >expect && + untracked_*/empty + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o "untracked_*" >actual && + test_cmp expect actual +' + +# It turns out fill_directory returns the right paths, but ls-files' post-call +# filtering in show_dir_entry() via calling dir_path_match() which ends up +# in git_fnmatch() has logic for PATHSPEC_ONESTAR that assumes the pathspec +# must match the full path; it doesn't check it for matching a leading +# directory. +test_expect_failure FUNNYNAMES 'git ls-files -o untracked_*/ recurses appropriately' ' + cat <<-EOF >expect && + untracked_*/empty + untracked_dir/empty + untracked_repo/ + EOF + git ls-files -o "untracked_*/" >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o --directory untracked_* does not recurse' ' + cat <<-EOF >expect && + untracked_*/ + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory "untracked_*" >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'git ls-files -o --directory untracked_*/ does not recurse' ' + cat <<-EOF >expect && + untracked_*/ + untracked_dir/ + untracked_repo/ + EOF + git ls-files -o --directory "untracked_*/" >actual && + test_cmp expect actual +' + +test_expect_success 'git ls-files -o consistent between one or two dirs' ' + git ls-files -o --exclude-standard an_ignored_dir/ an_untracked_dir/ >tmp && + ! grep ^an_ignored_dir/ tmp >expect && + git ls-files -o --exclude-standard an_ignored_dir/ >actual && + test_cmp expect actual +' + +# ls-files doesn't have a way to request showing both untracked and ignored +# files at the same time, so use `git status --ignored` +test_expect_success 'git status --ignored shows same files under dir with or without pathspec' ' + cat <<-EOF >expect && + ?? an_untracked_dir/ + !! an_untracked_dir/ignored + EOF + git status --porcelain --ignored >output && + grep an_untracked_dir output >expect && + git status --porcelain --ignored an_untracked_dir/ >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t3030-merge-recursive.sh b/t/t3030-merge-recursive.sh index ff641b3..d48d211 100755 --- a/t/t3030-merge-recursive.sh +++ b/t/t3030-merge-recursive.sh @@ -452,6 +452,34 @@ test_expect_success 'merge-recursive d/f conflict result' ' ' +test_expect_success SYMLINKS 'dir in working tree with symlink ancestor does not produce d/f conflict' ' + git init sym && + ( + cd sym && + ln -s . foo && + mkdir bar && + >bar/file && + git add foo bar/file && + git commit -m "foo symlink" && + + git checkout -b branch1 && + git commit --allow-empty -m "empty commit" && + + git checkout master && + git rm foo && + mkdir foo && + >foo/bar && + git add foo/bar && + git commit -m "replace foo symlink with real foo dir and foo/bar file" && + + git checkout branch1 && + + git cherry-pick master && + test_path_is_dir foo && + test_path_is_file foo/bar + ) +' + test_expect_success 'reset and 3-way merge' ' git reset --hard "$c2" && @@ -576,7 +604,7 @@ test_expect_success 'merge removes empty directories' ' git commit -mremoved-d/e && git checkout master && git merge -s recursive rm && - test_must_fail test -d d + test_path_is_missing d ' test_expect_success 'merge-recursive simple w/submodule' ' @@ -667,15 +695,22 @@ test_expect_success 'merging with triple rename across D/F conflict' ' test_expect_success 'merge-recursive remembers the names of all base trees' ' git reset --hard HEAD && + # make the index match $c1 so that merge-recursive below does not + # fail early + git diff --binary HEAD $c1 -- | git apply --cached && + # more trees than static slots used by oid_to_hex() for commit in $c0 $c2 $c4 $c5 $c6 $c7 do git rev-parse "$commit^{tree}" done >trees && - # ignore the return code -- it only fails because the input is weird + # ignore the return code; it only fails because the input is weird... test_must_fail git -c merge.verbosity=5 merge-recursive $(cat trees) -- $c1 $c3 >out && + # ...but make sure it fails in the expected way + test_i18ngrep CONFLICT.*rename/rename out && + # merge-recursive prints in reverse order, but we do not care sort <trees >expect && sed -n "s/^virtual //p" out | sort >actual && diff --git a/t/t3035-merge-sparse.sh b/t/t3035-merge-sparse.sh index c4b4a94..74562e1 100755 --- a/t/t3035-merge-sparse.sh +++ b/t/t3035-merge-sparse.sh @@ -28,7 +28,7 @@ test_expect_success 'setup' ' git config core.sparseCheckout true && echo "/checked-out" >.git/info/sparse-checkout && git reset --hard && - ! git merge theirs + test_must_fail git merge theirs ' test_expect_success 'reset --hard works after the conflict' ' @@ -42,7 +42,7 @@ test_expect_success 'is reset properly' ' ' test_expect_success 'setup: conflict back' ' - ! git merge theirs + test_must_fail git merge theirs ' test_expect_success 'Merge abort works after the conflict' ' diff --git a/t/t3060-ls-files-with-tree.sh b/t/t3060-ls-files-with-tree.sh index 44f378c..52ed665 100755 --- a/t/t3060-ls-files-with-tree.sh +++ b/t/t3060-ls-files-with-tree.sh @@ -47,7 +47,7 @@ test_expect_success setup ' git add . ' -test_expect_success 'git -ls-files --with-tree should succeed from subdir' ' +test_expect_success 'git ls-files --with-tree should succeed from subdir' ' # We have to run from a sub-directory to trigger prune_path # Then we finally get to run our --with-tree test ( @@ -57,7 +57,7 @@ test_expect_success 'git -ls-files --with-tree should succeed from subdir' ' ' test_expect_success \ - 'git -ls-files --with-tree should add entries from named tree.' \ + 'git ls-files --with-tree should add entries from named tree.' \ 'test_cmp expected output' test_done diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh index 478b82c..411a70b 100755 --- a/t/t3200-branch.sh +++ b/t/t3200-branch.sh @@ -42,6 +42,10 @@ test_expect_success 'git branch a/b/c should create a branch' ' git branch a/b/c && test_path_is_file .git/refs/heads/a/b/c ' +test_expect_success 'git branch mb master... should create a branch' ' + git branch mb master... && test_path_is_file .git/refs/heads/mb +' + test_expect_success 'git branch HEAD should fail' ' test_must_fail git branch HEAD ' @@ -202,18 +206,22 @@ test_expect_success 'git branch -M baz bam should succeed when baz is checked ou git worktree add -f bazdir2 baz && git branch -M baz bam && test $(git -C bazdir rev-parse --abbrev-ref HEAD) = bam && - test $(git -C bazdir2 rev-parse --abbrev-ref HEAD) = bam + test $(git -C bazdir2 rev-parse --abbrev-ref HEAD) = bam && + rm -r bazdir bazdir2 && + git worktree prune ' test_expect_success 'git branch -M baz bam should succeed within a worktree in which baz is checked out' ' git checkout -b baz && - git worktree add -f bazdir3 baz && + git worktree add -f bazdir baz && ( - cd bazdir3 && + cd bazdir && git branch -M baz bam && test $(git rev-parse --abbrev-ref HEAD) = bam ) && - test $(git rev-parse --abbrev-ref HEAD) = bam + test $(git rev-parse --abbrev-ref HEAD) = bam && + rm -r bazdir && + git worktree prune ' test_expect_success 'git branch -M master should work when master is checked out' ' @@ -264,6 +272,30 @@ test_expect_success 'git branch --list -d t should fail' ' test_must_fail git rev-parse refs/heads/t ' +test_expect_success 'deleting checked-out branch from repo that is a submodule' ' + test_when_finished "rm -rf repo1 repo2" && + + git init repo1 && + git init repo1/sub && + test_commit -C repo1/sub x && + git -C repo1 submodule add ./sub && + git -C repo1 commit -m "adding sub" && + + git clone --recurse-submodules repo1 repo2 && + git -C repo2/sub checkout -b work && + test_must_fail git -C repo2/sub branch -D work +' + +test_expect_success 'bare main worktree has HEAD at branch deleted by secondary worktree' ' + test_when_finished "rm -rf nonbare base secondary" && + + git init nonbare && + test_commit -C nonbare x && + git clone --bare nonbare bare && + git -C bare worktree add --detach ../secondary master && + git -C secondary branch -D master +' + test_expect_success 'git branch --list -v with --abbrev' ' test_when_finished "git branch -D t" && git branch t && @@ -292,8 +324,8 @@ test_expect_success 'git branch --list -v with --abbrev' ' test_expect_success 'git branch --column' ' COLUMNS=81 git branch --column=column >actual && cat >expected <<\EOF && - a/b/c bam foo l * master n o/p r - abc bar j/k m/m master2 o/o q + a/b/c bam foo l * master mb o/o q + abc bar j/k m/m master2 n o/p r EOF test_cmp expected actual ' @@ -315,6 +347,7 @@ test_expect_success 'git branch --column with an extremely long branch name' ' m/m * master master2 + mb n o/o o/p @@ -332,8 +365,8 @@ test_expect_success 'git branch with column.*' ' git config --unset column.branch && git config --unset column.ui && cat >expected <<\EOF && - a/b/c bam foo l * master n o/p r - abc bar j/k m/m master2 o/o q + a/b/c bam foo l * master mb o/o q + abc bar j/k m/m master2 n o/p r EOF test_cmp expected actual ' @@ -357,6 +390,7 @@ test_expect_success 'git branch -v with column.ui ignored' ' m/m * master master2 + mb n o/o o/p @@ -774,7 +808,9 @@ test_expect_success 'test deleting branch without config' ' test_expect_success 'deleting currently checked out branch fails' ' git worktree add -b my7 my7 && test_must_fail git -C my7 branch -d my7 && - test_must_fail git branch -d my7 + test_must_fail git branch -d my7 && + rm -r my7 && + git worktree prune ' test_expect_success 'test --track without .fetch entries' ' diff --git a/t/t3201-branch-contains.sh b/t/t3201-branch-contains.sh index 0ea4fc4..40251c9 100755 --- a/t/t3201-branch-contains.sh +++ b/t/t3201-branch-contains.sh @@ -192,10 +192,10 @@ test_expect_success 'branch --merged with --verbose' ' EOF test_cmp expect actual && git branch --verbose --merged topic >actual && - cat >expect <<-\EOF && - master c77a0a9 second on master - * topic 2c939f4 [ahead 1] foo - zzz c77a0a9 second on master + cat >expect <<-EOF && + master $(git rev-parse --short master) second on master + * topic $(git rev-parse --short topic ) [ahead 1] foo + zzz $(git rev-parse --short zzz ) second on master EOF test_i18ncmp expect actual ' diff --git a/t/t3203-branch-output.sh b/t/t3203-branch-output.sh index ee67876..71818b9 100755 --- a/t/t3203-branch-output.sh +++ b/t/t3203-branch-output.sh @@ -100,6 +100,53 @@ test_expect_success 'git branch -v pattern does not show branch summaries' ' test_must_fail git branch -v branch* ' +test_expect_success 'git branch `--show-current` shows current branch' ' + cat >expect <<-\EOF && + branch-two + EOF + git checkout branch-two && + git branch --show-current >actual && + test_cmp expect actual +' + +test_expect_success 'git branch `--show-current` is silent when detached HEAD' ' + git checkout HEAD^0 && + git branch --show-current >actual && + test_must_be_empty actual +' + +test_expect_success 'git branch `--show-current` works properly when tag exists' ' + cat >expect <<-\EOF && + branch-and-tag-name + EOF + test_when_finished " + git checkout branch-one + git branch -D branch-and-tag-name + " && + git checkout -b branch-and-tag-name && + test_when_finished "git tag -d branch-and-tag-name" && + git tag branch-and-tag-name && + git branch --show-current >actual && + test_cmp expect actual +' + +test_expect_success 'git branch `--show-current` works properly with worktrees' ' + cat >expect <<-\EOF && + branch-one + branch-two + EOF + git checkout branch-one && + test_when_finished " + git worktree remove worktree_dir + " && + git worktree add worktree_dir branch-two && + { + git branch --show-current && + git -C worktree_dir branch --show-current + } >actual && + test_cmp expect actual +' + test_expect_success 'git branch shows detached HEAD properly' ' cat >expect <<EOF && * (HEAD detached at $(git rev-parse --short HEAD^0)) @@ -240,6 +287,24 @@ test_expect_success 'git branch --format option' ' test_i18ncmp expect actual ' +test_expect_success 'worktree colors correct' ' + cat >expect <<-EOF && + * <GREEN>(HEAD detached from fromtag)<RESET> + ambiguous<RESET> + branch-one<RESET> + + <CYAN>branch-two<RESET> + master<RESET> + ref-to-branch<RESET> -> branch-one + ref-to-remote<RESET> -> origin/branch-one + EOF + git worktree add worktree_dir branch-two && + git branch --color >actual.raw && + rm -r worktree_dir && + git worktree prune && + test_decode_color <actual.raw >actual && + test_i18ncmp expect actual +' + test_expect_success "set up color tests" ' echo "<RED>master<RESET>" >expect.color && echo "master" >expect.bare && @@ -264,4 +329,23 @@ test_expect_success '--color overrides auto-color' ' test_cmp expect.color actual ' +test_expect_success 'verbose output lists worktree path' ' + one=$(git rev-parse --short HEAD) && + two=$(git rev-parse --short master) && + cat >expect <<-EOF && + * (HEAD detached from fromtag) $one one + ambiguous $one one + branch-one $two two + + branch-two $one ($(pwd)/worktree_dir) one + master $two two + ref-to-branch $two two + ref-to-remote $two two + EOF + git worktree add worktree_dir branch-two && + git branch -vv >actual && + rm -r worktree_dir && + git worktree prune && + test_i18ncmp expect actual +' + test_done diff --git a/t/t3206-range-diff.sh b/t/t3206-range-diff.sh index 048feaf..bd808f8 100755 --- a/t/t3206-range-diff.sh +++ b/t/t3206-range-diff.sh @@ -8,98 +8,213 @@ test_description='range-diff tests' # harm than good. We need some real history. test_expect_success 'setup' ' - git fast-import < "$TEST_DIRECTORY"/t3206/history.export + git fast-import <"$TEST_DIRECTORY"/t3206/history.export && + test_oid_cache <<-\EOF + # topic + t1 sha1:4de457d + t2 sha1:fccce22 + t3 sha1:147e64e + t4 sha1:a63e992 + t1 sha256:b89f8b9 + t2 sha256:5f12aad + t3 sha256:ea8b273 + t4 sha256:14b7336 + + # unmodified + u1 sha1:35b9b25 + u2 sha1:de345ab + u3 sha1:9af6654 + u4 sha1:2901f77 + u1 sha256:e3731be + u2 sha256:14fadf8 + u3 sha256:736c4bc + u4 sha256:673e77d + + # reordered + r1 sha1:aca177a + r2 sha1:14ad629 + r3 sha1:ee58208 + r4 sha1:307b27a + r1 sha256:f59d3aa + r2 sha256:fb261a8 + r3 sha256:cb2649b + r4 sha256:958577e + + # removed (deleted) + d1 sha1:7657159 + d2 sha1:43d84d3 + d3 sha1:a740396 + d1 sha256:e312513 + d2 sha256:eb19258 + d3 sha256:1ccb3c1 + + # added + a1 sha1:2716022 + a2 sha1:b62accd + a3 sha1:df46cfa + a4 sha1:3e64548 + a5 sha1:12b4063 + a1 sha256:d724f4d + a2 sha256:1de7762 + a3 sha256:e159431 + a4 sha256:b3e483c + a5 sha256:90866a7 + + # rebased + b1 sha1:cc9c443 + b2 sha1:c5d9641 + b3 sha1:28cc2b6 + b4 sha1:5628ab7 + b5 sha1:a31b12e + b1 sha256:a1a8717 + b2 sha256:20a5862 + b3 sha256:587172a + b4 sha256:2721c5d + b5 sha256:7b57864 + + # changed + c1 sha1:a4b3333 + c2 sha1:f51d370 + c3 sha1:0559556 + c4 sha1:d966c5c + c1 sha256:f8c2b9d + c2 sha256:3fb6318 + c3 sha256:168ab68 + c4 sha256:3526539 + + # changed-message + m1 sha1:f686024 + m2 sha1:4ab067d + m3 sha1:b9cb956 + m4 sha1:8add5f1 + m1 sha256:31e6281 + m2 sha256:a06bf1b + m3 sha256:82dc654 + m4 sha256:48470c5 + + # renamed + n1 sha1:f258d75 + n2 sha1:017b62d + n3 sha1:3ce7af6 + n4 sha1:1e6226b + n1 sha256:ad52114 + n2 sha256:3b54c8f + n3 sha256:3b0a644 + n4 sha256:e461653 + + # mode change + o1 sha1:4d39cb3 + o2 sha1:26c107f + o3 sha1:4c1e0f5 + o1 sha256:d0dd598 + o2 sha256:c4a279e + o3 sha256:78459d7 + + # added and removed + s1 sha1:096b1ba + s2 sha1:d92e698 + s3 sha1:9a1db4d + s4 sha1:fea3b5c + s1 sha256:a7f9134 + s2 sha256:b4c2580 + s3 sha256:1d62aa2 + s4 sha256:48160e8 + + # Empty delimiter (included so lines match neatly) + __ sha1:------- + __ sha256:------- + EOF ' test_expect_success 'simple A..B A..C (unmodified)' ' git range-diff --no-color master..topic master..unmodified \ >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: 35b9b25 s/5/A/ - 2: fccce22 = 2: de345ab s/4/A/ - 3: 147e64e = 3: 9af6654 s/11/B/ - 4: a63e992 = 4: 2901f77 s/12/B/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid u4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'simple B...C (unmodified)' ' git range-diff --no-color topic...unmodified >actual && - # same "expected" as above - test_cmp expected actual + # same "expect" as above + test_cmp expect actual ' test_expect_success 'simple A B C (unmodified)' ' git range-diff --no-color master topic unmodified >actual && - # same "expected" as above - test_cmp expected actual + # same "expect" as above + test_cmp expect actual ' test_expect_success 'trivial reordering' ' git range-diff --no-color master topic reordered >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: aca177a s/5/A/ - 3: 147e64e = 2: 14ad629 s/11/B/ - 4: a63e992 = 3: ee58208 s/12/B/ - 2: fccce22 = 4: 307b27a s/4/A/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid r1) s/5/A/ + 3: $(test_oid t3) = 2: $(test_oid r2) s/11/B/ + 4: $(test_oid t4) = 3: $(test_oid r3) s/12/B/ + 2: $(test_oid t2) = 4: $(test_oid r4) s/4/A/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'removed a commit' ' git range-diff --no-color master topic removed >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: 7657159 s/5/A/ - 2: fccce22 < -: ------- s/4/A/ - 3: 147e64e = 2: 43d84d3 s/11/B/ - 4: a63e992 = 3: a740396 s/12/B/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid d1) s/5/A/ + 2: $(test_oid t2) < -: $(test_oid __) s/4/A/ + 3: $(test_oid t3) = 2: $(test_oid d2) s/11/B/ + 4: $(test_oid t4) = 3: $(test_oid d3) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'added a commit' ' git range-diff --no-color master topic added >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: 2716022 s/5/A/ - 2: fccce22 = 2: b62accd s/4/A/ - -: ------- > 3: df46cfa s/6/A/ - 3: 147e64e = 4: 3e64548 s/11/B/ - 4: a63e992 = 5: 12b4063 s/12/B/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid a1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid a2) s/4/A/ + -: $(test_oid __) > 3: $(test_oid a3) s/6/A/ + 3: $(test_oid t3) = 4: $(test_oid a4) s/11/B/ + 4: $(test_oid t4) = 5: $(test_oid a5) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'new base, A B C' ' git range-diff --no-color master topic rebased >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: cc9c443 s/5/A/ - 2: fccce22 = 2: c5d9641 s/4/A/ - 3: 147e64e = 3: 28cc2b6 s/11/B/ - 4: a63e992 = 4: 5628ab7 s/12/B/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid b1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid b2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid b3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid b4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'new base, B...C' ' # this syntax includes the commits from master! git range-diff --no-color topic...rebased >actual && - cat >expected <<-EOF && - -: ------- > 1: a31b12e unrelated - 1: 4de457d = 2: cc9c443 s/5/A/ - 2: fccce22 = 3: c5d9641 s/4/A/ - 3: 147e64e = 4: 28cc2b6 s/11/B/ - 4: a63e992 = 5: 5628ab7 s/12/B/ + cat >expect <<-EOF && + -: $(test_oid __) > 1: $(test_oid b5) unrelated + 1: $(test_oid t1) = 2: $(test_oid b1) s/5/A/ + 2: $(test_oid t2) = 3: $(test_oid b2) s/4/A/ + 3: $(test_oid t3) = 4: $(test_oid b3) s/11/B/ + 4: $(test_oid t4) = 5: $(test_oid b4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit' ' git range-diff --no-color topic...changed >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - @@ -10,7 +10,7 @@ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + @@ file: A 9 10 -11 @@ -108,9 +223,9 @@ test_expect_success 'changed commit' ' 12 13 14 - 4: a63e992 ! 4: d966c5c s/12/B/ - @@ -8,7 +8,7 @@ - @@ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ + @@ file + @@ file: A 9 10 - B @@ -119,46 +234,46 @@ test_expect_success 'changed commit' ' +B 13 EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with --no-patch diff option' ' git range-diff --no-color --no-patch topic...changed >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - 4: a63e992 ! 4: d966c5c s/12/B/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with --stat diff option' ' git range-diff --no-color --stat topic...changed >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 2: fccce22 = 2: f51d370 s/4/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 3: 147e64e ! 3: 0559556 s/11/B/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) - 4: a63e992 ! 4: d966c5c s/12/B/ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ a => b | 0 1 file changed, 0 insertions(+), 0 deletions(-) EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'changed commit with sm config' ' git range-diff --no-color --submodule=log topic...changed >actual && - cat >expected <<-EOF && - 1: 4de457d = 1: a4b3333 s/5/A/ - 2: fccce22 = 2: f51d370 s/4/A/ - 3: 147e64e ! 3: 0559556 s/11/B/ - @@ -10,7 +10,7 @@ + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid c1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid c2) s/4/A/ + 3: $(test_oid t3) ! 3: $(test_oid c3) s/11/B/ + @@ file: A 9 10 -11 @@ -167,9 +282,9 @@ test_expect_success 'changed commit with sm config' ' 12 13 14 - 4: a63e992 ! 4: d966c5c s/12/B/ - @@ -8,7 +8,7 @@ - @@ + 4: $(test_oid t4) ! 4: $(test_oid c4) s/12/B/ + @@ file + @@ file: A 9 10 - B @@ -178,7 +293,133 @@ test_expect_success 'changed commit with sm config' ' +B 13 EOF - test_cmp expected actual + test_cmp expect actual +' + +test_expect_success 'renamed file' ' + git range-diff --no-color --submodule=log topic...renamed-file >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid n1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid n2) s/4/A/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/4/A/ + + s/4/A/ + rename file + Z + - ## file ## + + ## file => renamed-file ## + Z@@ + Z 1 + Z 2 + 3: $(test_oid t3) ! 3: $(test_oid n3) s/11/B/ + @@ Metadata + Z ## Commit message ## + Z s/11/B/ + Z + - ## file ## + -@@ file: A + + ## renamed-file ## + +@@ renamed-file: A + Z 8 + Z 9 + Z 10 + 4: $(test_oid t4) ! 4: $(test_oid n4) s/12/B/ + @@ Metadata + Z ## Commit message ## + Z s/12/B/ + Z + - ## file ## + -@@ file: A + + ## renamed-file ## + +@@ renamed-file: A + Z 9 + Z 10 + Z B + EOF + test_cmp expect actual +' + +test_expect_success 'file with mode only change' ' + git range-diff --no-color --submodule=log topic...mode-only-change >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t2) ! 1: $(test_oid o1) s/4/A/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/4/A/ + + s/4/A/ + add other-file + Z + Z ## file ## + Z@@ + @@ file + Z A + Z 6 + Z 7 + + + + ## other-file (new) ## + 2: $(test_oid t3) ! 2: $(test_oid o2) s/11/B/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/11/B/ + + s/11/B/ + mode change other-file + Z + Z ## file ## + Z@@ file: A + @@ file: A + Z 12 + Z 13 + Z 14 + + + + ## other-file (mode change 100644 => 100755) ## + 3: $(test_oid t4) = 3: $(test_oid o3) s/12/B/ + EOF + test_cmp expect actual +' + +test_expect_success 'file added and later removed' ' + git range-diff --no-color --submodule=log topic...added-removed >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid s1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid s2) s/4/A/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/4/A/ + + s/4/A/ + new-file + Z + Z ## file ## + Z@@ + @@ file + Z A + Z 6 + Z 7 + + + + ## new-file (new) ## + 3: $(test_oid t3) ! 3: $(test_oid s3) s/11/B/ + @@ Metadata + ZAuthor: Thomas Rast <trast@inf.ethz.ch> + Z + Z ## Commit message ## + - s/11/B/ + + s/11/B/ + remove file + Z + Z ## file ## + Z@@ file: A + @@ file: A + Z 12 + Z 13 + Z 14 + + + + ## new-file (deleted) ## + 4: $(test_oid t4) = 4: $(test_oid s4) s/12/B/ + EOF + test_cmp expect actual ' test_expect_success 'no commits on one side' ' @@ -188,39 +429,39 @@ test_expect_success 'no commits on one side' ' test_expect_success 'changed message' ' git range-diff --no-color topic...changed-message >actual && - sed s/Z/\ /g >expected <<-EOF && - 1: 4de457d = 1: f686024 s/5/A/ - 2: fccce22 ! 2: 4ab067d s/4/A/ - @@ -2,6 +2,8 @@ - Z + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid m1) s/5/A/ + 2: $(test_oid t2) ! 2: $(test_oid m2) s/4/A/ + @@ Metadata + Z ## Commit message ## Z s/4/A/ Z + Also a silly comment here! + - Z diff --git a/file b/file - Z --- a/file - Z +++ b/file - 3: 147e64e = 3: b9cb956 s/11/B/ - 4: a63e992 = 4: 8add5f1 s/12/B/ + Z ## file ## + Z@@ + Z 1 + 3: $(test_oid t3) = 3: $(test_oid m3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid m4) s/12/B/ EOF - test_cmp expected actual + test_cmp expect actual ' test_expect_success 'dual-coloring' ' - sed -e "s|^:||" >expect <<-\EOF && - :<YELLOW>1: a4b3333 = 1: f686024 s/5/A/<RESET> - :<RED>2: f51d370 <RESET><YELLOW>!<RESET><GREEN> 2: 4ab067d<RESET><YELLOW> s/4/A/<RESET> - : <REVERSE><CYAN>@@ -2,6 +2,8 @@<RESET> - : <RESET> + sed -e "s|^:||" >expect <<-EOF && + :<YELLOW>1: $(test_oid c1) = 1: $(test_oid m1) s/5/A/<RESET> + :<RED>2: $(test_oid c2) <RESET><YELLOW>!<RESET><GREEN> 2: $(test_oid m2)<RESET><YELLOW> s/4/A/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>Metadata<RESET> + : ## Commit message ##<RESET> : s/4/A/<RESET> : <RESET> : <REVERSE><GREEN>+<RESET><BOLD> Also a silly comment here!<RESET> : <REVERSE><GREEN>+<RESET> - : diff --git a/file b/file<RESET> - : --- a/file<RESET> - : +++ b/file<RESET> - :<RED>3: 0559556 <RESET><YELLOW>!<RESET><GREEN> 3: b9cb956<RESET><YELLOW> s/11/B/<RESET> - : <REVERSE><CYAN>@@ -10,7 +10,7 @@<RESET> + : ## file ##<RESET> + : <CYAN> @@<RESET> + : 1<RESET> + :<RED>3: $(test_oid c3) <RESET><YELLOW>!<RESET><GREEN> 3: $(test_oid m3)<RESET><YELLOW> s/11/B/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>file: A<RESET> : 9<RESET> : 10<RESET> : <RED> -11<RESET> @@ -229,9 +470,9 @@ test_expect_success 'dual-coloring' ' : 12<RESET> : 13<RESET> : 14<RESET> - :<RED>4: d966c5c <RESET><YELLOW>!<RESET><GREEN> 4: 8add5f1<RESET><YELLOW> s/12/B/<RESET> - : <REVERSE><CYAN>@@ -8,7 +8,7 @@<RESET> - : <CYAN> @@<RESET> + :<RED>4: $(test_oid c4) <RESET><YELLOW>!<RESET><GREEN> 4: $(test_oid m4)<RESET><YELLOW> s/12/B/<RESET> + : <REVERSE><CYAN>@@<RESET> <RESET>file<RESET> + : <CYAN> @@ file: A<RESET> : 9<RESET> : 10<RESET> : <REVERSE><RED>-<RESET><FAINT> BB<RESET> @@ -268,4 +509,206 @@ test_expect_success 'format-patch --range-diff as commentary' ' grep "> 1: .* new message" 0001-* ' +test_expect_success 'range-diff overrides diff.noprefix internally' ' + git -c diff.noprefix=true range-diff HEAD^... +' + +test_expect_success 'range-diff compares notes by default' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git range-diff --no-color master..topic master..unmodified \ + >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid u4) s/12/B/ + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + test_cmp expect actual +' + +test_expect_success 'range-diff with --no-notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git range-diff --no-color --no-notes master..topic master..unmodified \ + >actual && + cat >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) = 4: $(test_oid u4) s/12/B/ + EOF + test_cmp expect actual +' + +test_expect_success 'range-diff with multiple --notes' ' + git notes --ref=note1 add -m "topic note1" topic && + git notes --ref=note1 add -m "unmodified note1" unmodified && + test_when_finished git notes --ref=note1 remove topic unmodified && + git notes --ref=note2 add -m "topic note2" topic && + git notes --ref=note2 add -m "unmodified note2" unmodified && + test_when_finished git notes --ref=note2 remove topic unmodified && + git range-diff --no-color --notes=note1 --notes=note2 master..topic master..unmodified \ + >actual && + sed s/Z/\ /g >expect <<-EOF && + 1: $(test_oid t1) = 1: $(test_oid u1) s/5/A/ + 2: $(test_oid t2) = 2: $(test_oid u2) s/4/A/ + 3: $(test_oid t3) = 3: $(test_oid u3) s/11/B/ + 4: $(test_oid t4) ! 4: $(test_oid u4) s/12/B/ + @@ Commit message + Z + Z + Z ## Notes (note1) ## + - topic note1 + + unmodified note1 + Z + Z + Z ## Notes (note2) ## + - topic note2 + + unmodified note2 + Z + Z ## file ## + Z@@ file: A + EOF + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff does not compare notes by default' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "= 4: .* s/12/B" 0000-* && + ! grep "Notes" 0000-* && + ! grep "note" 0000-* +' + +test_expect_success 'format-patch --range-diff with --no-notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --no-notes --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "= 4: .* s/12/B" 0000-* && + ! grep "Notes" 0000-* && + ! grep "note" 0000-* +' + +test_expect_success 'format-patch --range-diff with --notes' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + git format-patch --notes --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff with format.notes config' ' + git notes add -m "topic note" topic && + git notes add -m "unmodified note" unmodified && + test_when_finished git notes remove topic unmodified && + test_config format.notes true && + git format-patch --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes ## + - topic note + + unmodified note + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + +test_expect_success 'format-patch --range-diff with multiple notes' ' + git notes --ref=note1 add -m "topic note1" topic && + git notes --ref=note1 add -m "unmodified note1" unmodified && + test_when_finished git notes --ref=note1 remove topic unmodified && + git notes --ref=note2 add -m "topic note2" topic && + git notes --ref=note2 add -m "unmodified note2" unmodified && + test_when_finished git notes --ref=note2 remove topic unmodified && + git format-patch --notes=note1 --notes=note2 --cover-letter --range-diff=$prev \ + master..unmodified >actual && + test_when_finished "rm 000?-*" && + test_line_count = 5 actual && + test_i18ngrep "^Range-diff:$" 0000-* && + grep "= 1: .* s/5/A" 0000-* && + grep "= 2: .* s/4/A" 0000-* && + grep "= 3: .* s/11/B" 0000-* && + grep "! 4: .* s/12/B" 0000-* && + sed s/Z/\ /g >expect <<-EOF && + @@ Commit message + Z + Z + Z ## Notes (note1) ## + - topic note1 + + unmodified note1 + Z + Z + Z ## Notes (note2) ## + - topic note2 + + unmodified note2 + Z + Z ## file ## + Z@@ file: A + EOF + sed "/@@ Commit message/,/@@ file: A/!d" 0000-* >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3206/history.export b/t/t3206/history.export index b8ffff0..4c808e5 100644 --- a/t/t3206/history.export +++ b/t/t3206/history.export @@ -22,8 +22,8 @@ data 51 19 20 -reset refs/heads/removed -commit refs/heads/removed +reset refs/heads/renamed-file +commit refs/heads/renamed-file mark :2 author Thomas Rast <trast@inf.ethz.ch> 1374424921 +0200 committer Thomas Rast <trast@inf.ethz.ch> 1374484724 +0200 @@ -55,7 +55,7 @@ A 19 20 -commit refs/heads/topic +commit refs/heads/mode-only-change mark :4 author Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 committer Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 @@ -599,6 +599,111 @@ s/12/B/ from :46 M 100644 :28 file -reset refs/heads/removed -from :47 +commit refs/heads/added-removed +mark :48 +author Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574151 +0100 +data 7 +s/5/A/ +from :2 +M 100644 :3 file + +blob +mark :49 +data 0 + +commit refs/heads/added-removed +mark :50 +author Thomas Rast <trast@inf.ethz.ch> 1374485024 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 18 +s/4/A/ + new-file +from :48 +M 100644 :5 file +M 100644 :49 new-file + +commit refs/heads/added-removed +mark :51 +author Thomas Rast <trast@inf.ethz.ch> 1374485036 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 22 +s/11/B/ + remove file +from :50 +M 100644 :7 file +D new-file + +commit refs/heads/added-removed +mark :52 +author Thomas Rast <trast@inf.ethz.ch> 1374485044 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574177 +0100 +data 8 +s/12/B/ +from :51 +M 100644 :9 file + +commit refs/heads/renamed-file +mark :53 +author Thomas Rast <trast@inf.ethz.ch> 1374485014 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574309 +0100 +data 7 +s/5/A/ +from :2 +M 100644 :3 file + +commit refs/heads/renamed-file +mark :54 +author Thomas Rast <trast@inf.ethz.ch> 1374485024 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574312 +0100 +data 21 +s/4/A/ + rename file +from :53 +D file +M 100644 :5 renamed-file + +commit refs/heads/renamed-file +mark :55 +author Thomas Rast <trast@inf.ethz.ch> 1374485036 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574319 +0100 +data 8 +s/11/B/ +from :54 +M 100644 :7 renamed-file + +commit refs/heads/renamed-file +mark :56 +author Thomas Rast <trast@inf.ethz.ch> 1374485044 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1556574319 +0100 +data 8 +s/12/B/ +from :55 +M 100644 :9 renamed-file + +commit refs/heads/mode-only-change +mark :57 +author Thomas Rast <trast@inf.ethz.ch> 1374485024 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1570473767 +0100 +data 24 +s/4/A/ + add other-file +from :4 +M 100644 :5 file +M 100644 :49 other-file + +commit refs/heads/mode-only-change +mark :58 +author Thomas Rast <trast@inf.ethz.ch> 1374485036 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1570473768 +0100 +data 33 +s/11/B/ + mode change other-file +from :57 +M 100644 :7 file +M 100755 :49 other-file + +commit refs/heads/mode-only-change +mark :59 +author Thomas Rast <trast@inf.ethz.ch> 1374485044 +0200 +committer Thomas Gummerer <t.gummerer@gmail.com> 1570473768 +0100 +data 8 +s/12/B/ +from :58 +M 100644 :9 file diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index 9ea5fa4..f41b2af 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -240,7 +240,7 @@ test_expect_success 'retry acquiring packed-refs.lock' ' test_expect_success SYMLINKS 'pack symlinked packed-refs' ' # First make sure that symlinking works when reading: - git update-ref refs/heads/loosy refs/heads/master && + git update-ref refs/heads/lossy refs/heads/master && git for-each-ref >all-refs-before && mv .git/packed-refs .git/my-deviant-packed-refs && ln -s my-deviant-packed-refs .git/packed-refs && diff --git a/t/t3301-notes.sh b/t/t3301-notes.sh index 84bbf88..8f43303 100755 --- a/t/t3301-notes.sh +++ b/t/t3301-notes.sh @@ -54,7 +54,9 @@ test_expect_success 'create notes' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b4" = "$(git notes show)" && + echo b4 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -66,8 +68,9 @@ test_expect_success 'show notes entry with %N' ' ' test_expect_success 'create reflog entry' ' + ref=$(git rev-parse --short refs/notes/commits) && cat <<-EOF >expect && - a1d8fa6 refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' + $ref refs/notes/commits@{0}: notes: Notes added by '\''git notes add'\'' EOF git reflog show refs/notes/commits >actual && test_cmp expect actual @@ -78,14 +81,21 @@ test_expect_success 'edit existing notes' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b3" = "$(git notes show)" && + echo b3 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'show notes from treeish' ' - test "b3" = "$(git notes --ref commits^{tree} show)" && - test "b4" = "$(git notes --ref commits@{1} show)" + echo b3 >expect && + git notes --ref commits^{tree} show >actual && + test_cmp expect actual && + + echo b4 >expect && + git notes --ref commits@{1} show >actual && + test_cmp expect actual ' test_expect_success 'cannot edit notes from non-ref' ' @@ -98,7 +108,9 @@ test_expect_success 'cannot "git notes add -m" where notes already exists' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b3" = "$(git notes show)" && + echo b3 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -108,7 +120,9 @@ test_expect_success 'can overwrite existing note with "git notes add -f -m"' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b1" = "$(git notes show)" && + echo b1 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -118,7 +132,9 @@ test_expect_success 'add w/no options on existing note morphs into edit' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b2" = "$(git notes show)" && + echo b2 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' @@ -128,14 +144,17 @@ test_expect_success 'can overwrite existing note with "git notes add -f"' ' test_path_is_missing .git/NOTES_EDITMSG && git ls-tree -r refs/notes/commits >actual && test_line_count = 1 actual && - test "b1" = "$(git notes show)" && + echo b1 >expect && + git notes show >actual && + test_cmp expect actual && git show HEAD^ && test_must_fail git notes show HEAD^ ' test_expect_success 'show notes' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7a4ca6ee52a974a66cbaa78e33214535dff1d691 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:14:13 2005 -0700 @@ -144,7 +163,8 @@ test_expect_success 'show notes' ' Notes: ${indent}b1 EOF - ! (git cat-file commit HEAD | grep b1) && + git cat-file commit HEAD >commits && + ! grep b1 commits && git log -1 >actual && test_cmp expect actual ' @@ -152,8 +172,9 @@ test_expect_success 'show notes' ' test_expect_success 'show multi-line notes' ' test_commit 3rd && MSG="b3${LF}c3c3c3c3${LF}d3d3d3" git notes add && + commit=$(git rev-parse HEAD) && cat >expect-multiline <<-EOF && - commit d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:15:13 2005 -0700 @@ -174,8 +195,9 @@ test_expect_success 'show -F notes' ' test_commit 4th && echo "xyzzy" >note5 && git notes add -F note5 && + commit=$(git rev-parse HEAD) && cat >expect-F <<-EOF && - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:16:13 2005 -0700 @@ -198,10 +220,13 @@ test_expect_success 'Re-adding -F notes without -f fails' ' ' test_expect_success 'git log --pretty=raw does not show notes' ' + commit=$(git rev-parse HEAD) && + tree=$(git rev-parse HEAD^{tree}) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 - tree 05ac65288c4c4b3b709a020ae94b2ece2f2201ae - parent d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit $commit + tree $tree + parent $parent author A U Thor <author@example.com> 1112912173 -0700 committer C O Mitter <committer@example.com> 1112912173 -0700 @@ -291,8 +316,9 @@ test_expect_success 'git log --no-notes resets ref list' ' test_expect_success 'show -m notes' ' test_commit 5th && git notes add -m spam -m "foo${LF}bar${LF}baz" && + commit=$(git rev-parse HEAD) && cat >expect-m <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -313,8 +339,9 @@ test_expect_success 'show -m notes' ' test_expect_success 'remove note with add -f -F /dev/null' ' git notes add -f -F /dev/null && + commit=$(git rev-parse HEAD) && cat >expect-rm-F <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -356,14 +383,16 @@ test_expect_success 'create note with combination of -m and -F' ' test_expect_success 'remove note with "git notes remove"' ' git notes remove HEAD^ && git notes remove && + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-rm-remove <<-EOF && - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 ${indent}5th - commit 0f7aa3ec6325aeb88b910453bb3eb37c49d75c11 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:16:13 2005 -0700 @@ -459,9 +488,13 @@ test_expect_success 'removing with --stdin --ignore-missing' ' ' test_expect_success 'list notes with "git notes list"' ' - cat >expect <<-EOF && - c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 - c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit_2=$(git rev-parse 2nd) && + commit_3=$(git rev-parse 3rd) && + note_2=$(git rev-parse refs/notes/commits:$commit_2) && + note_3=$(git rev-parse refs/notes/commits:$commit_3) && + sort -t" " -k2 >expect <<-EOF && + $note_2 $commit_2 + $note_3 $commit_3 EOF git notes list >actual && test_cmp expect actual @@ -473,9 +506,7 @@ test_expect_success 'list notes with "git notes"' ' ' test_expect_success 'list specific note with "git notes list <object>"' ' - cat >expect <<-EOF && - c18dc024e14f08d18d14eea0d747ff692d66d6a3 - EOF + git rev-parse refs/notes/commits:$commit_3 >expect && git notes list HEAD^^ >actual && test_cmp expect actual ' @@ -498,10 +529,12 @@ test_expect_success 'append to existing note with "git notes append"' ' ' test_expect_success '"git notes list" does not expand to "git notes list HEAD"' ' - cat >expect_list <<-EOF && - c9c6af7f78bc47490dbf3e822cf2f3c24d4b9061 7a4ca6ee52a974a66cbaa78e33214535dff1d691 - 4b6ad22357cc8a1296720574b8d2fbc22fab0671 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 - c18dc024e14f08d18d14eea0d747ff692d66d6a3 d07d62e5208f22eb5695e7eb47667dc8b9860290 + commit_5=$(git rev-parse 5th) && + note_5=$(git rev-parse refs/notes/commits:$commit_5) && + sort -t" " -k2 >expect_list <<-EOF && + $note_2 $commit_2 + $note_3 $commit_3 + $note_5 $commit_5 EOF git notes list >actual && test_cmp expect_list actual @@ -531,8 +564,9 @@ test_expect_success 'appending empty string to non-existing note does not create test_expect_success 'create other note on a different notes ref (setup)' ' test_commit 6th && GIT_NOTES_REF="refs/notes/other" git notes add -m "other note" && + commit=$(git rev-parse HEAD) && cat >expect-not-other <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -569,8 +603,10 @@ test_expect_success 'Do not show note when core.notesRef is overridden' ' ' test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-both <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -582,7 +618,7 @@ test_expect_success 'Show all notes when notes.displayRef=refs/notes/*' ' Notes (other): ${indent}other note - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -616,8 +652,9 @@ test_expect_success 'notes.displayRef can be given more than once' ' ' test_expect_success 'notes.displayRef respects order' ' + commit=$(git rev-parse HEAD) && cat >expect-both-reversed <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -642,14 +679,16 @@ test_expect_success 'GIT_NOTES_DISPLAY_REF works' ' ' test_expect_success 'GIT_NOTES_DISPLAY_REF overrides config' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect-none <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 ${indent}6th - commit 7f9ad8836c775acb134c0a055fc55fb4cd1ba361 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:17:13 2005 -0700 @@ -666,8 +705,9 @@ test_expect_success '--show-notes=* adds to GIT_NOTES_DISPLAY_REF' ' ' test_expect_success '--no-standard-notes' ' + commit=$(git rev-parse HEAD) && cat >expect-commits <<-EOF && - commit 2c125331118caba0ff8238b7f4958ac6e93fe39c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:18:13 2005 -0700 @@ -700,7 +740,8 @@ test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' git notes show HEAD: >actual && test_cmp expect actual && echo "Note on a blob" >expect && - filename=$(git ls-tree --name-only HEAD | head -n1) && + git ls-tree --name-only HEAD >files && + filename=$(head -n1 files) && git notes add -m "Note on a blob" HEAD:$filename && git notes show HEAD:$filename >actual && test_cmp expect actual && @@ -712,8 +753,10 @@ test_expect_success 'Allow notes on non-commits (trees, blobs, tags)' ' ' test_expect_success 'create note from other note with "git notes add -C"' ' + test_commit 7th && + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit fb01e0ca8c33b6cc0c6451dde747f97df567cb5c + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:19:13 2005 -0700 @@ -722,11 +765,13 @@ test_expect_success 'create note from other note with "git notes add -C"' ' Notes: ${indent}order test EOF - test_commit 7th && - git notes add -C $(git notes list HEAD^) && + note=$(git notes list HEAD^) && + git notes add -C $note && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'create note from non-existing note with "git notes add -C" fails' ' @@ -744,8 +789,9 @@ test_expect_success 'create note from non-blob with "git notes add -C" fails' ' ' test_expect_success 'create note from blob with "git notes add -C" reuses blob id' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 9a4c31c7f722b5d517e92c64e932dd751e1413bf + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:20:13 2005 -0700 @@ -754,16 +800,19 @@ test_expect_success 'create note from blob with "git notes add -C" reuses blob i Notes: ${indent}This is a blob object EOF - blob=$(echo "This is a blob object" | git hash-object -w --stdin) && - git notes add -C $blob && + echo "This is a blob object" | git hash-object -w --stdin >blob && + git notes add -C $(cat blob) && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$blob" + git notes list HEAD >actual && + test_cmp blob actual ' test_expect_success 'create note from other note with "git notes add -c"' ' + test_commit 9th && + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:21:13 2005 -0700 @@ -772,8 +821,8 @@ test_expect_success 'create note from other note with "git notes add -c"' ' Notes: ${indent}yet another note EOF - test_commit 9th && - MSG="yet another note" git notes add -c $(git notes list HEAD^^) && + note=$(git notes list HEAD^^) && + MSG="yet another note" git notes add -c $note && git log -1 >actual && test_cmp expect actual ' @@ -785,8 +834,9 @@ test_expect_success 'create note from non-existing note with "git notes add -c" ' test_expect_success 'append to note from other note with "git notes append -C"' ' + commit=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 2e0db4bc649e174d667a1cde19e725cf897a5bd2 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:21:13 2005 -0700 @@ -797,14 +847,16 @@ test_expect_success 'append to note from other note with "git notes append -C"' ${indent} ${indent}yet another note EOF - git notes append -C $(git notes list HEAD^) HEAD^ && + note=$(git notes list HEAD^) && + git notes append -C $note HEAD^ && git log -1 HEAD^ >actual && test_cmp expect actual ' test_expect_success 'create note from other note with "git notes append -c"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:22:13 2005 -0700 @@ -813,14 +865,16 @@ test_expect_success 'create note from other note with "git notes append -c"' ' Notes: ${indent}other note EOF - MSG="other note" git notes append -c $(git notes list HEAD^) && + note=$(git notes list HEAD^) && + MSG="other note" git notes append -c $note && git log -1 >actual && test_cmp expect actual ' test_expect_success 'append to note from other note with "git notes append -c"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 7c3b87ab368f81e11b1ea87b2ab99a71ccd25406 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:22:13 2005 -0700 @@ -831,14 +885,37 @@ test_expect_success 'append to note from other note with "git notes append -c"' ${indent} ${indent}yet another note EOF - MSG="yet another note" git notes append -c $(git notes list HEAD) && + note=$(git notes list HEAD) && + MSG="yet another note" git notes append -c $note && git log -1 >actual && test_cmp expect actual ' test_expect_success 'copy note with "git notes copy"' ' + commit=$(git rev-parse 4th) && cat >expect <<-EOF && - commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:16:13 2005 -0700 + + ${indent}4th + + Notes: + ${indent}This is a blob object + EOF + git notes copy 8th 4th && + git log 3rd..4th >actual && + test_cmp expect actual && + git notes list 4th >expect && + git notes list 8th >actual && + test_cmp expect actual +' + +test_expect_success 'copy note with "git notes copy" with default' ' + test_commit 11th && + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:23:13 2005 -0700 @@ -849,23 +926,59 @@ test_expect_success 'copy note with "git notes copy"' ' ${indent} ${indent}yet another note EOF - test_commit 11th && - git notes copy HEAD^ HEAD && + git notes copy HEAD^ && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'prevent overwrite with "git notes copy"' ' test_must_fail git notes copy HEAD~2 HEAD && + cat >expect <<-EOF && + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}other note + ${indent} + ${indent}yet another note + EOF git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD^)" + git notes list HEAD^ >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'allow overwrite with "git notes copy -f"' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit a446fff8777efdc6eb8f4b7c8a5ff699484df0d5 + commit $commit + Author: A U Thor <author@example.com> + Date: Thu Apr 7 15:23:13 2005 -0700 + + ${indent}11th + + Notes: + ${indent}This is a blob object + EOF + git notes copy -f HEAD~3 HEAD && + git log -1 >actual && + test_cmp expect actual && + git notes list HEAD~3 >expect && + git notes list HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'allow overwrite with "git notes copy -f" with default' ' + commit=$(git rev-parse HEAD) && + cat >expect <<-EOF && + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:23:13 2005 -0700 @@ -876,10 +989,12 @@ test_expect_success 'allow overwrite with "git notes copy -f"' ' ${indent} ${indent}yet another note EOF - git notes copy -f HEAD~2 HEAD && + git notes copy -f HEAD~2 && git log -1 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" + git notes list HEAD~2 >expect && + git notes list HEAD >actual && + test_cmp expect actual ' test_expect_success 'cannot copy note from object without notes' ' @@ -889,8 +1004,10 @@ test_expect_success 'cannot copy note from object without notes' ' ' test_expect_success 'git notes copy --stdin' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit e871aa61182b1d95d0a6fb75445d891722863b6b + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:25:13 2005 -0700 @@ -901,7 +1018,7 @@ test_expect_success 'git notes copy --stdin' ' ${indent} ${indent}yet another note - commit 65e263ded02ae4e8839bc151095113737579dc12 + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:24:13 2005 -0700 @@ -912,41 +1029,57 @@ test_expect_success 'git notes copy --stdin' ' ${indent} ${indent}yet another note EOF - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --stdin && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --stdin <copy && git log -2 >actual && test_cmp expect actual && - test "$(git notes list HEAD)" = "$(git notes list HEAD~2)" && - test "$(git notes list HEAD^)" = "$(git notes list HEAD~3)" + git notes list HEAD~2 >expect && + git notes list HEAD >actual && + test_cmp expect actual && + git notes list HEAD~3 >expect && + git notes list HEAD^ >actual && + test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (unconfigured)' ' + test_commit 14th && + test_commit 15th && + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 ${indent}15th - commit 07c85d77059393ed0154b8c96906547a59dfcddd + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:26:13 2005 -0700 ${indent}14th EOF - test_commit 14th && - test_commit 15th && - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -2 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (enabled)' ' + commit=$(git rev-parse HEAD) && + parent=$(git rev-parse HEAD^) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -957,7 +1090,7 @@ test_expect_success 'git notes copy --for-rewrite (enabled)' ' ${indent} ${indent}yet another note - commit 07c85d77059393ed0154b8c96906547a59dfcddd + commit $parent Author: A U Thor <author@example.com> Date: Thu Apr 7 15:26:13 2005 -0700 @@ -970,24 +1103,31 @@ test_expect_success 'git notes copy --for-rewrite (enabled)' ' EOF test_config notes.rewriteMode overwrite && test_config notes.rewriteRef "refs/notes/*" && - (echo $(git rev-parse HEAD~3) $(git rev-parse HEAD^) && - echo $(git rev-parse HEAD~2) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD^) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD~2) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -2 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (disabled)' ' test_config notes.rewrite.bar false && - echo $(git rev-parse HEAD~3) $(git rev-parse HEAD) | - git notes copy --for-rewrite=bar && + from=$(git rev-parse HEAD~3) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=bar <copy && git log -2 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (overwrite)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -999,8 +1139,10 @@ test_expect_success 'git notes copy --for-rewrite (overwrite)' ' git notes add -f -m"a fresh note" HEAD^ && test_config notes.rewriteMode overwrite && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1008,15 +1150,18 @@ test_expect_success 'git notes copy --for-rewrite (overwrite)' ' test_expect_success 'git notes copy --for-rewrite (ignore)' ' test_config notes.rewriteMode ignore && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (append)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1030,15 +1175,18 @@ test_expect_success 'git notes copy --for-rewrite (append)' ' git notes add -f -m"another fresh note" HEAD^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' test_expect_success 'git notes copy --for-rewrite (append two to one)' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1057,9 +1205,13 @@ test_expect_success 'git notes copy --for-rewrite (append two to one)' ' git notes add -f -m"append 2" HEAD^^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - (echo $(git rev-parse HEAD^) $(git rev-parse HEAD) && - echo $(git rev-parse HEAD^^) $(git rev-parse HEAD)) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + from=$(git rev-parse HEAD^^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >>copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1068,15 +1220,18 @@ test_expect_success 'git notes copy --for-rewrite (append empty)' ' git notes remove HEAD^ && test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1088,15 +1243,18 @@ test_expect_success 'GIT_NOTES_REWRITE_MODE works' ' test_config notes.rewriteMode concatenate && test_config notes.rewriteRef "refs/notes/*" && git notes add -f -m"replacement note 1" HEAD^ && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + GIT_NOTES_REWRITE_MODE=overwrite git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' test_expect_success 'GIT_NOTES_REWRITE_REF works' ' + commit=$(git rev-parse HEAD) && cat >expect <<-EOF && - commit 4acf42e847e7fffbbf89ee365c20ac7caf40de89 + commit $commit Author: A U Thor <author@example.com> Date: Thu Apr 7 15:27:13 2005 -0700 @@ -1108,9 +1266,11 @@ test_expect_success 'GIT_NOTES_REWRITE_REF works' ' git notes add -f -m"replacement note 2" HEAD^ && test_config notes.rewriteMode overwrite && test_unconfig notes.rewriteRef && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && GIT_NOTES_REWRITE_REF=refs/notes/commits:refs/notes/other \ - git notes copy --for-rewrite=foo && + git notes copy --for-rewrite=foo <copy && git log -1 >actual && test_cmp expect actual ' @@ -1119,40 +1279,55 @@ test_expect_success 'GIT_NOTES_REWRITE_REF overrides config' ' git notes add -f -m"replacement note 3" HEAD^ && test_config notes.rewriteMode overwrite && test_config notes.rewriteRef refs/notes/other && - echo $(git rev-parse HEAD^) $(git rev-parse HEAD) | - GIT_NOTES_REWRITE_REF= git notes copy --for-rewrite=foo && + from=$(git rev-parse HEAD^) && + to=$(git rev-parse HEAD) && + echo "$from" "$to" >copy && + GIT_NOTES_REWRITE_REF=refs/notes/commits \ + git notes copy --for-rewrite=foo <copy && git log -1 >actual && - test_cmp expect actual + grep "replacement note 3" actual ' test_expect_success 'git notes copy diagnoses too many or too few parameters' ' - test_must_fail git notes copy && - test_must_fail git notes copy one two three + test_must_fail git notes copy 2>error && + test_i18ngrep "too few parameters" error && + test_must_fail git notes copy one two three 2>error && + test_i18ngrep "too many parameters" error ' test_expect_success 'git notes get-ref expands refs/heads/master to refs/notes/refs/heads/master' ' test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && - test "$(git notes --ref=refs/heads/master get-ref)" = "refs/notes/refs/heads/master" + echo refs/notes/refs/heads/master >expect && + git notes --ref=refs/heads/master get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (no overrides)' ' test_unconfig core.notesRef && sane_unset GIT_NOTES_REF && - test "$(git notes get-ref)" = "refs/notes/commits" + echo refs/notes/commits >expect && + git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (core.notesRef)' ' test_config core.notesRef refs/notes/foo && - test "$(git notes get-ref)" = "refs/notes/foo" + echo refs/notes/foo >expect && + git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (GIT_NOTES_REF)' ' - test "$(GIT_NOTES_REF=refs/notes/bar git notes get-ref)" = "refs/notes/bar" + echo refs/notes/bar >expect && + GIT_NOTES_REF=refs/notes/bar git notes get-ref >actual && + test_cmp expect actual ' test_expect_success 'git notes get-ref (--ref)' ' - test "$(GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref)" = "refs/notes/baz" + echo refs/notes/baz >expect && + GIT_NOTES_REF=refs/notes/bar git notes --ref=baz get-ref >actual && + test_cmp expect actual ' test_expect_success 'setup testing of empty notes' ' diff --git a/t/t3305-notes-fanout.sh b/t/t3305-notes-fanout.sh index 54460be..3b4753e 100755 --- a/t/t3305-notes-fanout.sh +++ b/t/t3305-notes-fanout.sh @@ -4,6 +4,38 @@ test_description='Test that adding/removing many notes triggers automatic fanout . ./test-lib.sh +path_has_fanout() { + path=$1 && + fanout=$2 && + after_last_slash=$((40 - $fanout * 2)) && + echo $path | grep -q "^\([0-9a-f]\{2\}/\)\{$fanout\}[0-9a-f]\{$after_last_slash\}$" +} + +touched_one_note_with_fanout() { + notes_commit=$1 && + modification=$2 && # 'A' for addition, 'D' for deletion + fanout=$3 && + diff=$(git diff-tree --no-commit-id --name-status --root -r $notes_commit) && + path=$(echo $diff | sed -e "s/^$modification[\t ]//") && + path_has_fanout "$path" $fanout; +} + +all_notes_have_fanout() { + notes_commit=$1 && + fanout=$2 && + git ls-tree -r --name-only $notes_commit 2>/dev/null | + while read path + do + path_has_fanout $path $fanout || return 1 + done +} + +test_expect_success 'tweak test environment' ' + git checkout -b nondeterminism && + test_commit A && + git checkout --orphan with_notes; +' + test_expect_success 'creating many notes with git-notes' ' num_notes=300 && i=0 && @@ -20,7 +52,7 @@ test_expect_success 'creating many notes with git-notes' ' test_expect_success 'many notes created correctly with git-notes' ' git log | grep "^ " > output && - i=300 && + i=$num_notes && while test $i -gt 0 do echo " commit #$i" && @@ -30,39 +62,46 @@ test_expect_success 'many notes created correctly with git-notes' ' test_cmp expect output ' -test_expect_success 'many notes created with git-notes triggers fanout' ' - # Expect entire notes tree to have a fanout == 1 - git ls-tree -r --name-only refs/notes/commits | - while read path +test_expect_success 'stable fanout 0 is followed by stable fanout 1' ' + i=$num_notes && + fanout=0 && + while test $i -gt 0 do - case "$path" in - ??/??????????????????????????????????????) - : true - ;; - *) - echo "Invalid path \"$path\"" && - return 1 - ;; - esac - done + i=$(($i - 1)) && + if touched_one_note_with_fanout refs/notes/commits~$i A $fanout + then + continue + elif test $fanout -eq 0 + then + fanout=1 && + if all_notes_have_fanout refs/notes/commits~$i $fanout + then + echo "Fanout 0 -> 1 at refs/notes/commits~$i" && + continue + fi + fi && + echo "Failed fanout=$fanout check at refs/notes/commits~$i" && + git ls-tree -r --name-only refs/notes/commits~$i && + return 1 + done && + all_notes_have_fanout refs/notes/commits 1 ' test_expect_success 'deleting most notes with git-notes' ' - num_notes=250 && + remove_notes=285 && i=0 && git rev-list HEAD | - while test $i -lt $num_notes && read sha1 + while test $i -lt $remove_notes && read sha1 do i=$(($i + 1)) && test_tick && - git notes remove "$sha1" || - exit 1 + git notes remove "$sha1" 2>/dev/null || return 1 done ' test_expect_success 'most notes deleted correctly with git-notes' ' - git log HEAD~250 | grep "^ " > output && - i=50 && + git log HEAD~$remove_notes | grep "^ " > output && + i=$(($num_notes - $remove_notes)) && while test $i -gt 0 do echo " commit #$i" && @@ -72,21 +111,29 @@ test_expect_success 'most notes deleted correctly with git-notes' ' test_cmp expect output ' -test_expect_success 'deleting most notes triggers fanout consolidation' ' - # Expect entire notes tree to have a fanout == 0 - git ls-tree -r --name-only refs/notes/commits | - while read path +test_expect_success 'stable fanout 1 is followed by stable fanout 0' ' + i=$remove_notes && + fanout=1 && + while test $i -gt 0 do - case "$path" in - ????????????????????????????????????????) - : true - ;; - *) - echo "Invalid path \"$path\"" && - return 1 - ;; - esac - done + i=$(($i - 1)) && + if touched_one_note_with_fanout refs/notes/commits~$i D $fanout + then + continue + elif test $fanout -eq 1 + then + fanout=0 && + if all_notes_have_fanout refs/notes/commits~$i $fanout + then + echo "Fanout 1 -> 0 at refs/notes/commits~$i" && + continue + fi + fi && + echo "Failed fanout=$fanout check at refs/notes/commits~$i" && + git ls-tree -r --name-only refs/notes/commits~$i && + return 1 + done && + all_notes_have_fanout refs/notes/commits 0 ' test_done diff --git a/t/t3306-notes-prune.sh b/t/t3306-notes-prune.sh index 6174808..8f4102f 100755 --- a/t/t3306-notes-prune.sh +++ b/t/t3306-notes-prune.sh @@ -11,23 +11,26 @@ test_expect_success 'setup: create a few commits with notes' ' test_tick && git commit -m 1st && git notes add -m "Note #1" && + first=$(git rev-parse HEAD) && : > file2 && git add file2 && test_tick && git commit -m 2nd && git notes add -m "Note #2" && + second=$(git rev-parse HEAD) && : > file3 && git add file3 && test_tick && git commit -m 3rd && - COMMIT_FILE=.git/objects/5e/e1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && + third=$(git rev-parse HEAD) && + COMMIT_FILE=$(echo $third | sed "s!^..!.git/objects/&/!") && test -f $COMMIT_FILE && test-tool chmtime =+0 $COMMIT_FILE && git notes add -m "Note #3" ' cat > expect <<END_OF_LOG -commit 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 +commit $third Author: A U Thor <author@example.com> Date: Thu Apr 7 15:15:13 2005 -0700 @@ -36,7 +39,7 @@ Date: Thu Apr 7 15:15:13 2005 -0700 Notes: Note #3 -commit 08341ad9e94faa089d60fd3f523affb25c6da189 +commit $second Author: A U Thor <author@example.com> Date: Thu Apr 7 15:14:13 2005 -0700 @@ -45,7 +48,7 @@ Date: Thu Apr 7 15:14:13 2005 -0700 Notes: Note #2 -commit ab5f302035f2e7aaf04265f08b42034c23256e1f +commit $first Author: A U Thor <author@example.com> Date: Thu Apr 7 15:13:13 2005 -0700 @@ -70,16 +73,16 @@ test_expect_success 'remove some commits' ' test_expect_success 'verify that commits are gone' ' - test_must_fail git cat-file -p 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git cat-file -p 08341ad9e94faa089d60fd3f523affb25c6da189 && - git cat-file -p ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git cat-file -p $third && + git cat-file -p $second && + git cat-file -p $first ' test_expect_success 'verify that notes are still present' ' - git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + git notes show $third && + git notes show $second && + git notes show $first ' test_expect_success 'prune -n does not remove notes' ' @@ -90,13 +93,10 @@ test_expect_success 'prune -n does not remove notes' ' test_cmp expect actual ' -cat > expect <<EOF -5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 -EOF test_expect_success 'prune -n lists prunable notes' ' - + echo $third >expect && git notes prune -n > actual && test_cmp expect actual ' @@ -109,9 +109,9 @@ test_expect_success 'prune notes' ' test_expect_success 'verify that notes are gone' ' - test_must_fail git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git notes show $third && + git notes show $second && + git notes show $first ' test_expect_success 'remove some commits' ' @@ -121,21 +121,18 @@ test_expect_success 'remove some commits' ' git gc --prune=now ' -cat > expect <<EOF -08341ad9e94faa089d60fd3f523affb25c6da189 -EOF - test_expect_success 'prune -v notes' ' + echo $second >expect && git notes prune -v > actual && test_cmp expect actual ' test_expect_success 'verify that notes are gone' ' - test_must_fail git notes show 5ee1c35e83ea47cd3cc4f8cbee0568915fbbbd29 && - test_must_fail git notes show 08341ad9e94faa089d60fd3f523affb25c6da189 && - git notes show ab5f302035f2e7aaf04265f08b42034c23256e1f + test_must_fail git notes show $third && + test_must_fail git notes show $second && + git notes show $first ' test_done diff --git a/t/t3308-notes-merge.sh b/t/t3308-notes-merge.sh index d60588e..790e292 100755 --- a/t/t3308-notes-merge.sh +++ b/t/t3308-notes-merge.sh @@ -20,7 +20,34 @@ test_expect_success setup ' git notes add -m "Notes on 3rd commit" 3rd && git notes add -m "Notes on 4th commit" 4th && # Copy notes to remote-notes - git fetch . refs/notes/*:refs/remote-notes/origin/* + git fetch . refs/notes/*:refs/remote-notes/origin/* && + + test_oid_init && + test_oid_cache <<-EOF + hash4a sha1:5e93d24084d32e1cb61f7070505b9d2530cca987 + hash3a sha1:8366731eeee53787d2bdf8fc1eff7d94757e8da0 + hash2a sha1:eede89064cd42441590d6afec6c37b321ada3389 + hash1a sha1:daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 + hash5b sha1:0f2efbd00262f2fd41dfae33df8765618eeacd99 + hash4b sha1:dec2502dac3ea161543f71930044deff93fa945c + hash3b sha1:4069cdb399fd45463ec6eef8e051a16a03592d91 + hash2c sha1:d000d30e6ddcfce3a8122c403226a2ce2fd04d9d + hash1c sha1:43add6bd0c8c0bc871ac7991e0f5573cfba27804 + hash4d sha1:1f257a3a90328557c452f0817d6cc50c89d315d4 + hash3d sha1:05a4927951bcef347f51486575b878b2b60137f2 + + hash4a sha256:eef876be1d32ac2e2e42240e0429325cec116e55e88cb2969899fac695aa762f + hash3a sha256:cf7cd1bc091d7ba4166a86df864110e42087cd893a5ae96bc50d637e0290939d + hash2a sha256:21ddde7ebce2c285213898cb04deca0fd3209610cf7aaf8222e4e2f45262fae2 + hash1a sha256:f9fe0eda16c6027732ed9d4295689a03abd16f893be69b3dcbf4037ddb191921 + hash5b sha256:20046f2244577797a9e3d3f790ea9eca4d8a6bafb2a5570bcb0e03aa02ce100b + hash4b sha256:f90563d134c61a95bb88afbd45d48ccc9e919c62aa6fbfcd483302b3e4d8dbcb + hash3b sha256:988f2aca9f2d87e93e6a73197c2bb99560cc44a2f92d18653968f956f01221e0 + hash2c sha256:84153b777b4d42827a756c6578dcdb59d8ae5d1360b874fb37c430150c825c26 + hash1c sha256:9beb2bc4eef72e4c4087be168a20573e34d993d9ab1883055f23e322afa06567 + hash4d sha256:32de39dc06e679a7abb2d4a55ede7709b3124340a4a90aa305971b1c72ac319d + hash3d sha256:fa73b20e41cbb7541c4c81d1535016131dbfbeb05bf6a71f6115e9cad31c7af5 + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -40,10 +67,10 @@ verify_notes () { } cat <<EOF | sort >expect_notes_x -5e93d24084d32e1cb61f7070505b9d2530cca987 $commit_sha4 -8366731eeee53787d2bdf8fc1eff7d94757e8da0 $commit_sha3 -eede89064cd42441590d6afec6c37b321ada3389 $commit_sha2 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash4a) $commit_sha4 +$(test_oid hash3a) $commit_sha3 +$(test_oid hash2a) $commit_sha2 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -126,10 +153,10 @@ test_expect_success 'merge previous notes commit (y^ => y) => No-op' ' ' cat <<EOF | sort >expect_notes_y -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -dec2502dac3ea161543f71930044deff93fa945c $commit_sha4 -4069cdb399fd45463ec6eef8e051a16a03592d91 $commit_sha3 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4b) $commit_sha4 +$(test_oid hash3b) $commit_sha3 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -193,11 +220,11 @@ test_expect_success 'merge empty notes ref (z => y)' ' ' cat <<EOF | sort >expect_notes_y -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -dec2502dac3ea161543f71930044deff93fa945c $commit_sha4 -4069cdb399fd45463ec6eef8e051a16a03592d91 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4b) $commit_sha4 +$(test_oid hash3b) $commit_sha3 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -231,9 +258,9 @@ test_expect_success 'change notes on other notes ref (y)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -daa55ffad6cb99bf64226532147ffcaf5ce8bdd1 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash1a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -262,10 +289,10 @@ test_expect_success 'change notes on notes ref (x)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -296,8 +323,8 @@ test_expect_success 'merge y into x => Non-conflicting 3-way merge' ' ' cat <<EOF | sort >expect_notes_w -05a4927951bcef347f51486575b878b2b60137f2 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 +$(test_oid hash3d) $commit_sha3 +$(test_oid hash2c) $commit_sha2 EOF cat >expect_log_w <<EOF @@ -326,11 +353,11 @@ test_expect_success 'create notes on new, separate notes ref (w)' ' ' cat <<EOF | sort >expect_notes_x -0f2efbd00262f2fd41dfae33df8765618eeacd99 $commit_sha5 -1f257a3a90328557c452f0817d6cc50c89d315d4 $commit_sha4 -05a4927951bcef347f51486575b878b2b60137f2 $commit_sha3 -d000d30e6ddcfce3a8122c403226a2ce2fd04d9d $commit_sha2 -43add6bd0c8c0bc871ac7991e0f5573cfba27804 $commit_sha1 +$(test_oid hash5b) $commit_sha5 +$(test_oid hash4d) $commit_sha4 +$(test_oid hash3d) $commit_sha3 +$(test_oid hash2c) $commit_sha2 +$(test_oid hash1c) $commit_sha1 EOF cat >expect_log_x <<EOF diff --git a/t/t3309-notes-merge-auto-resolve.sh b/t/t3309-notes-merge-auto-resolve.sh index 14c2adf..141d3e4 100755 --- a/t/t3309-notes-merge-auto-resolve.sh +++ b/t/t3309-notes-merge-auto-resolve.sh @@ -23,7 +23,67 @@ test_expect_success 'setup commits' ' test_commit 12th && test_commit 13th && test_commit 14th && - test_commit 15th + test_commit 15th && + + test_oid_cache <<-EOF + hash15a sha1:457a85d6c814ea208550f15fcc48f804ac8dc023 + hash14a sha1:b0c95b954301d69da2bc3723f4cb1680d355937c + hash13a sha1:5d30216a129eeffa97d9694ffe8c74317a560315 + hash12a sha1:dd161bc149470fd890dd4ab52a4cbd79bbd18c36 + hash11a sha1:7abbc45126d680336fb24294f013a7cdfa3ed545 + hash10a sha1:b8d03e173f67f6505a76f6e00cf93440200dd9be + hash09a sha1:20c613c835011c48a5abe29170a2402ca6354910 + hash08a sha1:a3daf8a1e4e5dc3409a303ad8481d57bfea7f5d6 + hash07a sha1:897003322b53bc6ca098e9324ee508362347e734 + hash06a sha1:11d97fdebfa5ceee540a3da07bce6fa0222bc082 + hash15b sha1:68b8630d25516028bed862719855b3d6768d7833 + hash14b sha1:5de7ea7ad4f47e7ff91989fb82234634730f75df + hash13b sha1:3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc + hash12b sha1:a66055fa82f7a03fe0c02a6aba3287a85abf7c62 + hash05b sha1:154508c7a0bcad82b6fe4b472bc4c26b3bf0825b + hash04b sha1:e2bfd06a37dd2031684a59a6e2b033e212239c78 + hash03b sha1:5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 + hash15c sha1:9b4b2c61f0615412da3c10f98ff85b57c04ec765 + hash11c sha1:7e3c53503a3db8dd996cb62e37c66e070b44b54d + hash08c sha1:851e1638784a884c7dd26c5d41f3340f6387413a + hash05c sha1:99fc34adfc400b95c67b013115e37e31aa9a6d23 + hash02c sha1:283b48219aee9a4105f6cab337e789065c82c2b9 + hash15d sha1:7c4e546efd0fe939f876beb262ece02797880b54 + hash05d sha1:6c841cc36ea496027290967ca96bd2bef54dbb47 + hash15e sha1:d682107b8bf7a7aea1e537a8d5cb6a12b60135f1 + hash05e sha1:357b6ca14c7afd59b7f8b8aaaa6b8b723771135b + hash15f sha1:6be90240b5f54594203e25d9f2f64b7567175aee + hash05f sha1:660311d7f78dc53db12ac373a43fca7465381a7e + + hash15a sha256:45b1558e5c1b75f570010fa48aaa67bb2289fcd431b34ad81cb4c8b95f4f872a + hash14a sha256:6e7af179ea4dd28afdc83ae6912ba0098cdeff764b26a8b750b157dd81749092 + hash13a sha256:7353089961baf555388e1bac68c67c8ea94b08ccbd97532201cf7f6790703052 + hash12a sha256:5863e4521689ee1879ceab3b38d39e93ab5b51ec70aaf6a96ad388fbdedfa25e + hash11a sha256:82a0ec0338b4ecf8b44304badf4ad38d7469dc41827f38d7ba6c42e3bae3ee98 + hash10a sha256:e84f2564e92de9792c93b8d197262c735d7ccb1de6025cef8759af8f6c3308eb + hash09a sha256:4dd07764bcec696f195c0ea71ae89e174876403af1637e4642b8f4453fd23028 + hash08a sha256:02132c4546cd88a1d0aa5854dd55da120927f7904ba16afe36fe03e91a622067 + hash07a sha256:369baf7d00c6720efdc10273493555f943051f84a4706fb24caeb353fa4789db + hash06a sha256:52d32c10353583b2d96a5849b1f1f43c8018e76f3e8ef1b0d46eb5cff7cdefaf + hash15b sha256:345e6660b345fa174738a31a7a59423c394bdf414804e200bc510c65d971ae96 + hash14b sha256:7653a6596021c52e405cba979eea15a729993e7102b9a61ba4667e34f0ead4a1 + hash13b sha256:0f202a0b6b9690de2349c173dfd766a37e82744f61c14f1c389306f1d69f470b + hash12b sha256:eb00f219c026136ea6535b16ff8ec3efa510e6bf50098ca041e1a2a1d4b79840 + hash05b sha256:993b2290cd0c24c27c849d99f1904f3b590f77af0f539932734ad05679ac5a2f + hash04b sha256:c7fba0d6104917fbf35258f40b9fa4fc697cfa992deecd1570a3b08d0a5587a9 + hash03b sha256:7287a2d78a3766c181b08df38951d784b08b72a44f571ed6d855bd0be22c70f6 + hash15c sha256:62316660a22bf97857dc4a16709ec4d93a224e8c9f37d661ef91751e1f4c4166 + hash11c sha256:51c3763de9b08309370adc5036d58debb331980e73097902957c444602551daa + hash08c sha256:22cf1fa29599898a7218c51135d66ed85d22aad584f77db3305dedce4c3d4798 + hash05c sha256:2508fd86db980f0508893a1c1571bdf3b2ee113dc25ddb1a3a2fb94bd6cd0d58 + hash02c sha256:63bb527e0b4e1c8e1dd0d54dd778ca7c3718689fd6e37c473044cfbcf1cacfdb + hash15d sha256:667acb4e2d5f8df15e5aea4506dfd16d25bc7feca70fdb0d965a7222f983bb88 + hash05d sha256:09e6b5a6fe666c4a027674b6611a254b7d2528cd211c6b5288d1b4db6c741dfa + hash15e sha256:e8cbf52f6fcadc6de3c7761e64a89e9fe38d19a03d3e28ef6ca8596d93fc4f3a + hash05e sha256:cdb1e19f7ba1539f95af51a57edeb88a7ecc97d3c2f52da8c4c86af308595607 + hash15f sha256:29c14cb92da448a923963b8a43994268b19c2e57913de73f3667421fd2c0eeec + hash05f sha256:14a6e641b2c0a9f398ebac6b4d34afa5efea4c52d2631382f45f8f662266903b + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -68,16 +128,16 @@ test_expect_success 'setup merge base (x)' ' ' cat <<EOF | sort >expect_notes_x -457a85d6c814ea208550f15fcc48f804ac8dc023 $commit_sha15 -b0c95b954301d69da2bc3723f4cb1680d355937c $commit_sha14 -5d30216a129eeffa97d9694ffe8c74317a560315 $commit_sha13 -dd161bc149470fd890dd4ab52a4cbd79bbd18c36 $commit_sha12 -7abbc45126d680336fb24294f013a7cdfa3ed545 $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -20c613c835011c48a5abe29170a2402ca6354910 $commit_sha9 -a3daf8a1e4e5dc3409a303ad8481d57bfea7f5d6 $commit_sha8 -897003322b53bc6ca098e9324ee508362347e734 $commit_sha7 -11d97fdebfa5ceee540a3da07bce6fa0222bc082 $commit_sha6 +$(test_oid hash15a) $commit_sha15 +$(test_oid hash14a) $commit_sha14 +$(test_oid hash13a) $commit_sha13 +$(test_oid hash12a) $commit_sha12 +$(test_oid hash11a) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash09a) $commit_sha9 +$(test_oid hash08a) $commit_sha8 +$(test_oid hash07a) $commit_sha7 +$(test_oid hash06a) $commit_sha6 EOF cat >expect_log_x <<EOF @@ -141,16 +201,16 @@ test_expect_success 'setup local branch (y)' ' ' cat <<EOF | sort >expect_notes_y -68b8630d25516028bed862719855b3d6768d7833 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7abbc45126d680336fb24294f013a7cdfa3ed545 $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -20c613c835011c48a5abe29170a2402ca6354910 $commit_sha9 -154508c7a0bcad82b6fe4b472bc4c26b3bf0825b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 +$(test_oid hash15b) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11a) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash09a) $commit_sha9 +$(test_oid hash05b) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 EOF cat >expect_log_y <<EOF @@ -214,16 +274,16 @@ test_expect_success 'setup remote branch (z)' ' ' cat <<EOF | sort >expect_notes_z -9b4b2c61f0615412da3c10f98ff85b57c04ec765 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -5d30216a129eeffa97d9694ffe8c74317a560315 $commit_sha13 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -897003322b53bc6ca098e9324ee508362347e734 $commit_sha7 -99fc34adfc400b95c67b013115e37e31aa9a6d23 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15c) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13a) $commit_sha13 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash07a) $commit_sha7 +$(test_oid hash05c) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_z <<EOF @@ -306,16 +366,16 @@ test_expect_success 'merge z into y with invalid configuration option => Fail/No ' cat <<EOF | sort >expect_notes_ours -68b8630d25516028bed862719855b3d6768d7833 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -154508c7a0bcad82b6fe4b472bc4c26b3bf0825b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15b) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash05b) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_ours <<EOF @@ -395,16 +455,16 @@ test_expect_success 'reset to pre-merge state (y)' ' ' cat <<EOF | sort >expect_notes_theirs -9b4b2c61f0615412da3c10f98ff85b57c04ec765 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -99fc34adfc400b95c67b013115e37e31aa9a6d23 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15c) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05c) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_theirs <<EOF @@ -473,17 +533,17 @@ test_expect_success 'reset to pre-merge state (y)' ' ' cat <<EOF | sort >expect_notes_union -7c4e546efd0fe939f876beb262ece02797880b54 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -6c841cc36ea496027290967ca96bd2bef54dbb47 $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15d) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05d) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_union <<EOF @@ -574,17 +634,17 @@ test_expect_success 'merge z into y with "manual" per-ref only checks specific r ' cat <<EOF | sort >expect_notes_union2 -d682107b8bf7a7aea1e537a8d5cb6a12b60135f1 $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -357b6ca14c7afd59b7f8b8aaaa6b8b723771135b $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15e) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05e) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_union2 <<EOF @@ -648,17 +708,17 @@ test_expect_success 'reset to pre-merge state (z)' ' ' cat <<EOF | sort >expect_notes_cat_sort_uniq -6be90240b5f54594203e25d9f2f64b7567175aee $commit_sha15 -5de7ea7ad4f47e7ff91989fb82234634730f75df $commit_sha14 -3a631fdb6f41b05b55d8f4baf20728ba8f6fccbc $commit_sha13 -a66055fa82f7a03fe0c02a6aba3287a85abf7c62 $commit_sha12 -7e3c53503a3db8dd996cb62e37c66e070b44b54d $commit_sha11 -b8d03e173f67f6505a76f6e00cf93440200dd9be $commit_sha10 -851e1638784a884c7dd26c5d41f3340f6387413a $commit_sha8 -660311d7f78dc53db12ac373a43fca7465381a7e $commit_sha5 -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 +$(test_oid hash15f) $commit_sha15 +$(test_oid hash14b) $commit_sha14 +$(test_oid hash13b) $commit_sha13 +$(test_oid hash12b) $commit_sha12 +$(test_oid hash11c) $commit_sha11 +$(test_oid hash10a) $commit_sha10 +$(test_oid hash08c) $commit_sha8 +$(test_oid hash05f) $commit_sha5 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 EOF cat >expect_log_cat_sort_uniq <<EOF diff --git a/t/t3310-notes-merge-manual-resolve.sh b/t/t3310-notes-merge-manual-resolve.sh index 2dea846..d3d72e2 100755 --- a/t/t3310-notes-merge-manual-resolve.sh +++ b/t/t3310-notes-merge-manual-resolve.sh @@ -13,7 +13,39 @@ test_expect_success 'setup commits' ' test_commit 2nd && test_commit 3rd && test_commit 4th && - test_commit 5th + test_commit 5th && + + test_oid_cache <<-EOF + hash04a sha1:6e8e3febca3c2bb896704335cc4d0c34cb2f8715 + hash03a sha1:e5388c10860456ee60673025345fe2e153eb8cf8 + hash02a sha1:ceefa674873670e7ecd131814d909723cce2b669 + hash04b sha1:e2bfd06a37dd2031684a59a6e2b033e212239c78 + hash03b sha1:5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 + hash01b sha1:b0a6021ec006d07e80e9b20ec9b444cbd9d560d3 + hash04c sha1:cff59c793c20bb49a4e01bc06fb06bad642e0d54 + hash02c sha1:283b48219aee9a4105f6cab337e789065c82c2b9 + hash01c sha1:0a81da8956346e19bcb27a906f04af327e03e31b + hash04d sha1:00494adecf2d9635a02fa431308d67993f853968 + hash01e sha1:f75d1df88cbfe4258d49852f26cfc83f2ad4494b + hash04f sha1:021faa20e931fb48986ffc6282b4bb05553ac946 + hash01f sha1:0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 + hash05g sha1:304dfb4325cf243025b9957486eb605a9b51c199 + + hash04a sha256:f18a935e65866345098b3b754071dbf9f3aa3520eb27a7b036b278c5e2f1ed7e + hash03a sha256:713035dc94067a64e5fa6e4e1821b7c3bde49a77c7cb3f80eaadefa1ca41b3d2 + hash02a sha256:f160a67e048b6fa75bec3952184154045076692cf5dccd3da21e3fd34b7a3f0f + hash04b sha256:c7fba0d6104917fbf35258f40b9fa4fc697cfa992deecd1570a3b08d0a5587a9 + hash03b sha256:7287a2d78a3766c181b08df38951d784b08b72a44f571ed6d855bd0be22c70f6 + hash01b sha256:da96cf778c15d0a2bb76f98b2a62f6c9c01730fa7030e8f08ef0191048e7d620 + hash04c sha256:cb615d2def4b834d5f55b2351df97dc92bee4f5009d285201427f349081c8aca + hash02c sha256:63bb527e0b4e1c8e1dd0d54dd778ca7c3718689fd6e37c473044cfbcf1cacfdb + hash01c sha256:5b87237ac1fbae0246256fed9f9a1f077c4140fb7e6444925f8dbfa5ae406cd8 + hash04d sha256:eeddc9f9f6cb3d6b39b861659853f10891dc373e0b6eecb09e03e39b6ce64714 + hash01e sha256:108f521b1a74c2e6d0b52a4eda87e09162bf847f7d190cfce496ee1af0b29a5a + hash04f sha256:901acda0454502b3bbd281f130c419e6c8de78afcf72a8def8d45ad31462bce4 + hash01f sha256:a2d99d1b8bf23c8af7d9d91368454adc110dfd5cc068a4cebb486ee8f5a1e16c + hash05g sha256:4fef015b01da8efe929a68e3bb9b8fbad81f53995f097befe8ebc93f12ab98ec + EOF ' commit_sha1=$(git rev-parse 1st^{commit}) @@ -32,10 +64,16 @@ verify_notes () { test_cmp "expect_log_$notes_ref" "output_log_$notes_ref" } +notes_merge_files_gone () { + # No .git/NOTES_MERGE_* files left + { ls .git/NOTES_MERGE_* >output || :; } && + test_must_be_empty output +} + cat <<EOF | sort >expect_notes_x -6e8e3febca3c2bb896704335cc4d0c34cb2f8715 $commit_sha4 -e5388c10860456ee60673025345fe2e153eb8cf8 $commit_sha3 -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 EOF cat >expect_log_x <<EOF @@ -63,9 +101,9 @@ test_expect_success 'setup merge base (x)' ' ' cat <<EOF | sort >expect_notes_y -e2bfd06a37dd2031684a59a6e2b033e212239c78 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -b0a6021ec006d07e80e9b20ec9b444cbd9d560d3 $commit_sha1 +$(test_oid hash04b) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash01b) $commit_sha1 EOF cat >expect_log_y <<EOF @@ -95,9 +133,9 @@ test_expect_success 'setup local branch (y)' ' ' cat <<EOF | sort >expect_notes_z -cff59c793c20bb49a4e01bc06fb06bad642e0d54 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a81da8956346e19bcb27a906f04af327e03e31b $commit_sha1 +$(test_oid hash04c) $commit_sha4 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01c) $commit_sha1 EOF cat >expect_log_z <<EOF @@ -193,9 +231,9 @@ test_expect_success 'merge z into m (== y) with default ("manual") resolver => C ' cat <<EOF | sort >expect_notes_z -00494adecf2d9635a02fa431308d67993f853968 $commit_sha4 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a81da8956346e19bcb27a906f04af327e03e31b $commit_sha1 +$(test_oid hash04d) $commit_sha4 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01c) $commit_sha1 EOF cat >expect_log_z <<EOF @@ -231,8 +269,8 @@ test_expect_success 'cannot do merge w/conflicts when previous merge is unfinish # Setup non-conflicting merge between x and new notes ref w cat <<EOF | sort >expect_notes_w -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 -f75d1df88cbfe4258d49852f26cfc83f2ad4494b $commit_sha1 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01e) $commit_sha1 EOF cat >expect_log_w <<EOF @@ -258,10 +296,10 @@ test_expect_success 'setup unrelated notes ref (w)' ' ' cat <<EOF | sort >expect_notes_w -6e8e3febca3c2bb896704335cc4d0c34cb2f8715 $commit_sha4 -e5388c10860456ee60673025345fe2e153eb8cf8 $commit_sha3 -ceefa674873670e7ecd131814d909723cce2b669 $commit_sha2 -f75d1df88cbfe4258d49852f26cfc83f2ad4494b $commit_sha1 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01e) $commit_sha1 EOF cat >expect_log_w <<EOF @@ -291,10 +329,10 @@ test_expect_success 'can do merge without conflicts even if previous merge is un ' cat <<EOF | sort >expect_notes_m -021faa20e931fb48986ffc6282b4bb05553ac946 $commit_sha4 -5772f42408c0dd6f097a7ca2d24de0e78d1c46b1 $commit_sha3 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 $commit_sha1 +$(test_oid hash04f) $commit_sha4 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01f) $commit_sha1 EOF cat >expect_log_m <<EOF @@ -335,9 +373,7 @@ EOF y and z notes on 4th commit EOF git notes merge --commit && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # Merge commit has pre-merge y and pre-merge z as parents test "$(git rev-parse refs/notes/m^1)" = "$(cat pre_merge_y)" && test "$(git rev-parse refs/notes/m^2)" = "$(cat pre_merge_z)" && @@ -397,9 +433,7 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol test_expect_success 'abort notes merge' ' git notes merge --abort && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # m has not moved (still == y) test "$(git rev-parse refs/notes/m)" = "$(cat pre_merge_y)" && # Verify that other notes refs has not changed (w, x, y and z) @@ -430,9 +464,9 @@ test_expect_success 'redo merge of z into m (== y) with default ("manual") resol ' cat <<EOF | sort >expect_notes_m -304dfb4325cf243025b9957486eb605a9b51c199 $commit_sha5 -283b48219aee9a4105f6cab337e789065c82c2b9 $commit_sha2 -0a59e787e6d688aa6309e56e8c1b89431a0fc1c1 $commit_sha1 +$(test_oid hash05g) $commit_sha5 +$(test_oid hash02c) $commit_sha2 +$(test_oid hash01f) $commit_sha1 EOF cat >expect_log_m <<EOF @@ -464,9 +498,7 @@ EOF echo "new note on 5th commit" > .git/NOTES_MERGE_WORKTREE/$commit_sha5 && # Finalize merge git notes merge --commit && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # Merge commit has pre-merge y and pre-merge z as parents test "$(git rev-parse refs/notes/m^1)" = "$(cat pre_merge_y)" && test "$(git rev-parse refs/notes/m^2)" = "$(cat pre_merge_z)" && @@ -553,9 +585,7 @@ EOF test_expect_success 'resolve situation by aborting the notes merge' ' git notes merge --abort && - # No .git/NOTES_MERGE_* files left - test_might_fail ls .git/NOTES_MERGE_* >output 2>/dev/null && - test_must_be_empty output && + notes_merge_files_gone && # m has not moved (still == w) test "$(git rev-parse refs/notes/m)" = "$(git rev-parse refs/notes/w)" && # Verify that other notes refs has not changed (w, x, y and z) diff --git a/t/t3311-notes-merge-fanout.sh b/t/t3311-notes-merge-fanout.sh index 93516ef..5b67541 100755 --- a/t/t3311-notes-merge-fanout.sh +++ b/t/t3311-notes-merge-fanout.sh @@ -29,15 +29,10 @@ verify_fanout () { git ls-tree -r --name-only "refs/notes/$notes_ref" | while read path do - case "$path" in - ??/??????????????????????????????????????) - : true - ;; - *) + echo "$path" | grep "^../[0-9a-f]*$" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done } @@ -48,15 +43,10 @@ verify_no_fanout () { git ls-tree -r --name-only "refs/notes/$notes_ref" | while read path do - case "$path" in - ????????????????????????????????????????) - : true - ;; - *) + echo "$path" | grep -v "^../.*" || { echo "Invalid path \"$path\"" && - return 1 - ;; - esac + return 1; + } done } @@ -67,7 +57,27 @@ test_expect_success 'setup a few initial commits with notes (notes ref: x)' ' do test_commit "commit$i" >/dev/null && git notes add -m "notes for commit$i" || return 1 - done + done && + + git log --format=oneline && + + test_oid_cache <<-EOF + hash05a sha1:aed91155c7a72c2188e781fdf40e0f3761b299db + hash04a sha1:99fab268f9d7ee7b011e091a436c78def8eeee69 + hash03a sha1:953c20ae26c7aa0b428c20693fe38bc687f9d1a9 + hash02a sha1:6358796131b8916eaa2dde6902642942a1cb37e1 + hash01a sha1:b02d459c32f0e68f2fe0981033bb34f38776ba47 + hash03b sha1:9f506ee70e20379d7f78204c77b334f43d77410d + hash02b sha1:23a47d6ea7d589895faf800752054818e1e7627b + + hash05a sha256:3aae5d26619d96dba93795f66325716e4cbc486884f95a6adee8fb0615a76d12 + hash04a sha256:07e43dd3d89fe634d3252e253b426aacc7285a995dcdbcf94ac284060a1122cf + hash03a sha256:26fb52eaa7f4866bf735254587be7b31209ec10e525912ffd8e8ba549ba892ff + hash02a sha256:b57ebdf23634e750dcbc4b9a37991d70f90830d568a0e4529ce9de0a3f8d605c + hash01a sha256:377903b1572bd5117087a5518fcb1011b5053cccbc59e3c7c823a8615204173b + hash03b sha256:04e7b392fda7c185bfa17c9179b56db732edc2dc2b3bf887308dcaabb717270d + hash02b sha256:66099aaaec49a485ed990acadd9a9b81232ea592079964113d8f581ff69ef50b + EOF ' commit_sha1=$(git rev-parse commit1^{commit}) @@ -77,11 +87,11 @@ commit_sha4=$(git rev-parse commit4^{commit}) commit_sha5=$(git rev-parse commit5^{commit}) cat <<EOF | sort >expect_notes_x -aed91155c7a72c2188e781fdf40e0f3761b299db $commit_sha5 -99fab268f9d7ee7b011e091a436c78def8eeee69 $commit_sha4 -953c20ae26c7aa0b428c20693fe38bc687f9d1a9 $commit_sha3 -6358796131b8916eaa2dde6902642942a1cb37e1 $commit_sha2 -b02d459c32f0e68f2fe0981033bb34f38776ba47 $commit_sha1 +$(test_oid hash05a) $commit_sha5 +$(test_oid hash04a) $commit_sha4 +$(test_oid hash03a) $commit_sha3 +$(test_oid hash02a) $commit_sha2 +$(test_oid hash01a) $commit_sha1 EOF cat >expect_log_x <<EOF @@ -114,12 +124,12 @@ cp expect_log_x expect_log_y test_expect_success 'Add a few hundred commits w/notes to trigger fanout (x -> y)' ' git update-ref refs/notes/y refs/notes/x && git config core.notesRef refs/notes/y && - i=5 && - while test $i -lt $num + test_commit_bulk --start=6 --id=commit $((num - 5)) && + i=0 && + while test $i -lt $((num - 5)) do - i=$(($i + 1)) && - test_commit "commit$i" >/dev/null && - git notes add -m "notes for commit$i" || return 1 + git notes add -m "notes for commit$i" HEAD~$i || return 1 + i=$((i + 1)) done && test "$(git rev-parse refs/notes/y)" != "$(git rev-parse refs/notes/x)" && # Expected number of commits and notes @@ -145,9 +155,9 @@ test_expect_success 'Fast-forward merge (y => x)' ' ' cat <<EOF | sort >expect_notes_z -9f506ee70e20379d7f78204c77b334f43d77410d $commit_sha3 -23a47d6ea7d589895faf800752054818e1e7627b $commit_sha2 -b02d459c32f0e68f2fe0981033bb34f38776ba47 $commit_sha1 +$(test_oid hash03b) $commit_sha3 +$(test_oid hash02b) $commit_sha2 +$(test_oid hash01a) $commit_sha1 EOF cat >expect_log_z <<EOF diff --git a/t/t3400-rebase.sh b/t/t3400-rebase.sh index 3e73f75..40d2975 100755 --- a/t/t3400-rebase.sh +++ b/t/t3400-rebase.sh @@ -59,6 +59,14 @@ test_expect_success 'rebase against master' ' git rebase master ' +test_expect_success 'rebase sets ORIG_HEAD to pre-rebase state' ' + git checkout -b orig-head topic && + pre="$(git rev-parse --verify HEAD)" && + git rebase master && + test_cmp_rev "$pre" ORIG_HEAD && + test_cmp_rev ! "$pre" HEAD +' + test_expect_success 'rebase, with <onto> and <upstream> specified as :/quuxery' ' test_when_finished "git branch -D torebase" && git checkout -b torebase my-topic-branch^ && @@ -135,11 +143,11 @@ test_expect_success 'setup: recover' ' test_expect_success 'Show verbose error when HEAD could not be detached' ' >B && + test_when_finished "rm -f B" && test_must_fail git rebase topic 2>output.err >output.out && test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" output.err && test_i18ngrep B output.err ' -rm -f B test_expect_success 'fail when upstream arg is missing and not on branch' ' git checkout topic && @@ -151,19 +159,43 @@ test_expect_success 'fail when upstream arg is missing and not configured' ' test_must_fail git rebase ' -test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg' ' +test_expect_success 'rebase works with format.useAutoBase' ' + test_config format.useAutoBase true && + git checkout topic && + git rebase master +' + +test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--merge)' ' git checkout -b default-base master && git checkout -b default topic && git config branch.default.remote . && git config branch.default.merge refs/heads/default-base && - git rebase && + git rebase --merge && git rev-parse --verify default-base >expect && git rev-parse default~1 >actual && test_cmp expect actual && git checkout default-base && git reset --hard HEAD^ && git checkout default && - git rebase && + git rebase --merge && + git rev-parse --verify default-base >expect && + git rev-parse default~1 >actual && + test_cmp expect actual +' + +test_expect_success 'default to common base in @{upstream}s reflog if no upstream arg (--apply)' ' + git checkout -B default-base master && + git checkout -B default topic && + git config branch.default.remote . && + git config branch.default.merge refs/heads/default-base && + git rebase --apply && + git rev-parse --verify default-base >expect && + git rev-parse default~1 >actual && + test_cmp expect actual && + git checkout default-base && + git reset --hard HEAD^ && + git checkout default && + git rebase --apply && git rev-parse --verify default-base >expect && git rev-parse default~1 >actual && test_cmp expect actual @@ -192,9 +224,15 @@ test_expect_success 'cherry-picked commits and fork-point work together' ' test_cmp expect D ' -test_expect_success 'rebase -q is quiet' ' +test_expect_success 'rebase --apply -q is quiet' ' git checkout -b quiet topic && - git rebase -q master >output.out 2>&1 && + git rebase --apply -q master >output.out 2>&1 && + test_must_be_empty output.out +' + +test_expect_success 'rebase --merge -q is quiet' ' + git checkout -B quiet topic && + git rebase --merge -q master >output.out 2>&1 && test_must_be_empty output.out ' @@ -277,7 +315,7 @@ EOF test_cmp From_.msg out ' -test_expect_success 'rebase--am.sh and --show-current-patch' ' +test_expect_success 'rebase --apply and --show-current-patch' ' test_create_repo conflict-apply && ( cd conflict-apply && @@ -287,12 +325,48 @@ test_expect_success 'rebase--am.sh and --show-current-patch' ' echo two >>init.t && git commit -a -m two && git tag two && - test_must_fail git rebase --onto init HEAD^ && + test_must_fail git rebase --apply -f --onto init HEAD^ && GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr && grep "show.*$(git rev-parse two)" stderr ) ' +test_expect_success 'rebase --apply and .gitattributes' ' + test_create_repo attributes && + ( + cd attributes && + test_commit init && + git config filter.test.clean "sed -e '\''s/smudged/clean/g'\''" && + git config filter.test.smudge "sed -e '\''s/clean/smudged/g'\''" && + + test_commit second && + git checkout -b test HEAD^ && + + echo "*.txt filter=test" >.gitattributes && + git add .gitattributes && + test_commit third && + + echo "This text is smudged." >a.txt && + git add a.txt && + test_commit fourth && + + git checkout -b removal HEAD^ && + git rm .gitattributes && + git add -u && + test_commit fifth && + git cherry-pick test && + + git checkout test && + git rebase master && + grep "smudged" a.txt && + + git checkout removal && + git reset --hard && + git rebase master && + grep "clean" a.txt + ) +' + test_expect_success 'rebase--merge.sh and --show-current-patch' ' test_create_repo conflict-merge && ( @@ -311,4 +385,38 @@ test_expect_success 'rebase--merge.sh and --show-current-patch' ' ) ' +test_expect_success 'rebase -c rebase.useBuiltin=false warning' ' + expected="rebase.useBuiltin support has been removed" && + + # Only warn when the legacy rebase is requested... + test_must_fail git -c rebase.useBuiltin=false rebase 2>err && + test_i18ngrep "$expected" err && + test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=false git rebase 2>err && + test_i18ngrep "$expected" err && + + # ...not when we would have used the built-in anyway + test_must_fail git -c rebase.useBuiltin=true rebase 2>err && + test_must_be_empty err && + test_must_fail env GIT_TEST_REBASE_USE_BUILTIN=true git rebase 2>err && + test_must_be_empty err +' + +test_expect_success 'switch to branch checked out here' ' + git checkout master && + git rebase master master +' + +test_expect_success 'switch to branch not checked out' ' + git checkout master && + git branch other && + git rebase master other +' + +test_expect_success 'refuse to switch to branch checked out elsewhere' ' + git checkout master && + git worktree add wt && + test_must_fail git -C wt rebase master master 2>err && + test_i18ngrep "already checked out" err +' + test_done diff --git a/t/t3401-rebase-and-am-rename.sh b/t/t3401-rebase-and-am-rename.sh index e0b5111..f18bae9 100755 --- a/t/t3401-rebase-and-am-rename.sh +++ b/t/t3401-rebase-and-am-rename.sh @@ -42,7 +42,7 @@ test_expect_success 'rebase --interactive: directory rename detected' ' git checkout B^0 && set_fake_editor && - FAKE_LINES="1" git rebase --interactive A && + FAKE_LINES="1" git -c merge.directoryRenames=true rebase --interactive A && git ls-files -s >out && test_line_count = 5 out && @@ -52,13 +52,13 @@ test_expect_success 'rebase --interactive: directory rename detected' ' ) ' -test_expect_failure 'rebase (am): directory rename detected' ' +test_expect_failure 'rebase --apply: directory rename detected' ' ( cd dir-rename && git checkout B^0 && - git rebase A && + git -c merge.directoryRenames=true rebase --apply A && git ls-files -s >out && test_line_count = 5 out && @@ -74,7 +74,7 @@ test_expect_success 'rebase --merge: directory rename detected' ' git checkout B^0 && - git rebase --merge A && + git -c merge.directoryRenames=true rebase --merge A && git ls-files -s >out && test_line_count = 5 out && @@ -92,7 +92,7 @@ test_expect_failure 'am: directory rename detected' ' git format-patch -1 B && - git am --3way 0001*.patch && + git -c merge.directoryRenames=true am --3way 0001*.patch && git ls-files -s >out && test_line_count = 5 out && diff --git a/t/t3403-rebase-skip.sh b/t/t3403-rebase-skip.sh index 1f5122b..ee8a8db 100755 --- a/t/t3403-rebase-skip.sh +++ b/t/t3403-rebase-skip.sh @@ -7,6 +7,8 @@ test_description='git rebase --merge --skip tests' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + # we assume the default git am -3 --skip strategy is tested independently # and always works :) @@ -20,6 +22,13 @@ test_expect_success setup ' git commit -a -m "hello world" && echo goodbye >> hello && git commit -a -m "goodbye" && + git tag goodbye && + + git checkout --detach && + git checkout HEAD^ . && + test_tick && + git commit -m reverted-goodbye && + git tag reverted-goodbye && git checkout -f skip-reference && echo moo > hello && @@ -76,4 +85,27 @@ test_expect_success 'moved back to branch correctly' ' test_debug 'gitk --all & sleep 1' +test_expect_success 'fixup that empties commit fails' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 2" git rebase -i \ + goodbye^ reverted-goodbye + ) +' + +test_expect_success 'squash that empties commit fails' ' + test_when_finished "git rebase --abort" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 squash 2" git rebase -i \ + goodbye^ reverted-goodbye + ) +' + +# Must be the last test in this file +test_expect_success '$EDITOR and friends are unchanged' ' + test_editor_unchanged +' + test_done diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh index 7a440e0..c5ce3ab 100755 --- a/t/t3404-rebase-interactive.sh +++ b/t/t3404-rebase-interactive.sh @@ -29,9 +29,6 @@ Initial setup: . "$TEST_DIRECTORY"/lib-rebase.sh -# WARNING: Modifications to the initial repository can change the SHA ID used -# in the expect2 file for the 'stop on conflicting pick' test. - test_expect_success 'setup' ' test_commit A file1 && test_commit B file1 && @@ -75,13 +72,16 @@ test_expect_success 'rebase --keep-empty' ' test_line_count = 6 actual ' -cat > expect <<EOF -error: nothing to do -EOF - -test_expect_success 'rebase -i with empty HEAD' ' - set_fake_editor && - test_must_fail env FAKE_LINES="1 exec_true" git rebase -i HEAD^ >actual 2>&1 && +test_expect_success 'rebase -i with empty todo list' ' + cat >expect <<-\EOF && + error: nothing to do + EOF + ( + set_fake_editor && + test_must_fail env FAKE_LINES="#" \ + git rebase -i HEAD^ >output 2>&1 + ) && + tail -n 1 output >actual && # Ignore output about changing todo list test_i18ncmp expect actual ' @@ -140,25 +140,51 @@ test_expect_success 'rebase -i sets work tree properly' ' test_expect_success 'rebase -i with the exec command checks tree cleanness' ' git checkout master && - set_fake_editor && - test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" git rebase -i HEAD^ && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" \ + git rebase -i HEAD^ + ) && test_cmp_rev master^ HEAD && git reset --hard && git rebase --continue ' +test_expect_success 'rebase -x with empty command fails' ' + test_when_finished "git rebase --abort ||:" && + test_must_fail env git rebase -x "" @ 2>actual && + test_write_lines "error: empty exec command" >expected && + test_i18ncmp expected actual && + test_must_fail env git rebase -x " " @ 2>actual && + test_i18ncmp expected actual +' + +test_expect_success 'rebase -x with newline in command fails' ' + test_when_finished "git rebase --abort ||:" && + test_must_fail env git rebase -x "a${LF}b" @ 2>actual && + test_write_lines "error: exec commands cannot contain newlines" \ + >expected && + test_i18ncmp expected actual +' + test_expect_success 'rebase -i with exec of inexistent command' ' git checkout master && test_when_finished "git rebase --abort" && - set_fake_editor && - test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \ - git rebase -i HEAD^ >actual 2>&1 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \ + git rebase -i HEAD^ >actual 2>&1 + ) && ! grep "Maybe git-rebase is broken" actual ' +test_expect_success 'implicit interactive rebase does not invoke sequence editor' ' + test_when_finished "git rebase --abort ||:" && + GIT_SEQUENCE_EDITOR="echo bad >" git rebase -x"echo one" @^ +' + test_expect_success 'no changes are a nop' ' git checkout branch2 && - set_fake_editor && git rebase -i F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && test $(git rev-parse I) = $(git rev-parse HEAD) @@ -168,7 +194,6 @@ test_expect_success 'test the [branch] option' ' git checkout -b dead-end && git rm file6 && git commit -m "stop here" && - set_fake_editor && git rebase -i F branch2 && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" && test $(git rev-parse I) = $(git rev-parse branch2) && @@ -177,7 +202,6 @@ test_expect_success 'test the [branch] option' ' test_expect_success 'test --onto <branch>' ' git checkout -b test-onto branch2 && - set_fake_editor && git rebase -i --onto branch1 F && test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" && test $(git rev-parse HEAD^) = $(git rev-parse branch1) && @@ -187,7 +211,6 @@ test_expect_success 'test --onto <branch>' ' test_expect_success 'rebase on top of a non-conflicting commit' ' git checkout branch1 && git tag original-branch1 && - set_fake_editor && git rebase -i branch2 && test file6 = $(git diff --name-only original-branch1) && test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" && @@ -200,40 +223,42 @@ test_expect_success 'reflog for the branch shows state before rebase' ' ' test_expect_success 'reflog for the branch shows correct finish message' ' - printf "rebase -i (finish): refs/heads/branch1 onto %s\n" \ + printf "rebase (finish): refs/heads/branch1 onto %s\n" \ "$(git rev-parse branch2)" >expected && git log -g --pretty=%gs -1 refs/heads/branch1 >actual && test_cmp expected actual ' test_expect_success 'exchange two commits' ' - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 + ) && test H = $(git cat-file commit HEAD^ | sed -ne \$p) && - test G = $(git cat-file commit HEAD | sed -ne \$p) + test G = $(git cat-file commit HEAD | sed -ne \$p) && + blob1=$(git rev-parse --short HEAD^:file1) && + blob2=$(git rev-parse --short HEAD:file1) && + commit=$(git rev-parse --short HEAD) ' -cat > expect << EOF -diff --git a/file1 b/file1 -index f70f10e..fd79235 100644 ---- a/file1 -+++ b/file1 -@@ -1 +1 @@ --A -+G -EOF - -cat > expect2 << EOF -<<<<<<< HEAD -D -======= -G ->>>>>>> 5d18e54... G -EOF - test_expect_success 'stop on conflicting pick' ' + cat >expect <<-EOF && + diff --git a/file1 b/file1 + index $blob1..$blob2 100644 + --- a/file1 + +++ b/file1 + @@ -1 +1 @@ + -A + +G + EOF + cat >expect2 <<-EOF && + <<<<<<< HEAD + D + ======= + G + >>>>>>> $commit... G + EOF git tag new-branch1 && - set_fake_editor && test_must_fail git rebase -i master && test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" && test_cmp expect .git/rebase-merge/patch && @@ -262,7 +287,6 @@ test_expect_success 'abort' ' test_expect_success 'abort with error when new base cannot be checked out' ' git rm --cached file1 && git commit -m "remove file in base" && - set_fake_editor && test_must_fail git rebase -i master > output 2>&1 && test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \ output && @@ -277,7 +301,6 @@ test_expect_success 'retain authorship' ' test_tick && GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && git tag twerp && - set_fake_editor && git rebase -i --onto master HEAD^ && git show HEAD | grep "^Author: Twerp Snog" ' @@ -295,7 +318,6 @@ test_expect_success 'retain authorship w/ conflicts' ' test_commit b conflict b conflict-b && GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME && - set_fake_editor && test_must_fail git rebase -i conflict-a && echo resolved >conflict && git add conflict && @@ -311,9 +333,11 @@ test_expect_success 'squash' ' test_tick && GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 && echo "******************************" && - set_fake_editor && - FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \ - git rebase -i --onto master HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \ + git rebase -i --onto master HEAD~2 + ) && test B = $(cat file7) && test $(git rev-parse HEAD^) = $(git rev-parse master) ' @@ -324,7 +348,6 @@ test_expect_success 'retain authorship when squashing' ' test_expect_success REBASE_P '-p handles "no changes" gracefully' ' HEAD=$(git rev-parse HEAD) && - set_fake_editor && git rebase -i -p HEAD^ && git update-index --refresh && git diff-files --quiet && @@ -334,8 +357,10 @@ test_expect_success REBASE_P '-p handles "no changes" gracefully' ' test_expect_failure REBASE_P 'exchange two commits with -p' ' git checkout H && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i -p HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i -p HEAD~2 + ) && test H = $(git cat-file commit HEAD^ | sed -ne \$p) && test G = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -369,7 +394,6 @@ test_expect_success REBASE_P 'preserve merges with -p' ' git commit -m M file1 && git checkout -b to-be-rebased && test_tick && - set_fake_editor && git rebase -i -p --onto branch1 master && git update-index --refresh && git diff-files --quiet && @@ -384,8 +408,10 @@ test_expect_success REBASE_P 'preserve merges with -p' ' ' test_expect_success REBASE_P 'edit ancestor with -p' ' - set_fake_editor && - FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 && + ( + set_fake_editor && + FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3 + ) && echo 2 > unrelated-file && test_tick && git commit -m L2-modified --amend unrelated-file && @@ -399,11 +425,13 @@ test_expect_success REBASE_P 'edit ancestor with -p' ' test_expect_success '--continue tries to commit' ' git reset --hard D && test_tick && - set_fake_editor && - test_must_fail git rebase -i --onto new-branch1 HEAD^ && - echo resolved > file1 && - git add file1 && - FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && + ( + set_fake_editor && + test_must_fail git rebase -i --onto new-branch1 HEAD^ && + echo resolved > file1 && + git add file1 && + FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue + ) && test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) && git show HEAD | grep chouette ' @@ -411,7 +439,6 @@ test_expect_success '--continue tries to commit' ' test_expect_success 'verbose flag is heeded, even after --continue' ' git reset --hard master@{1} && test_tick && - set_fake_editor && test_must_fail git rebase -v -i --onto new-branch1 HEAD^ && echo resolved > file1 && git add file1 && @@ -421,10 +448,13 @@ test_expect_success 'verbose flag is heeded, even after --continue' ' test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 squash 2 squash 3 squash 4" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="1 squash 2 squash 3 squash 4" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) ' @@ -432,9 +462,12 @@ test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' ' test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' git checkout -b multi-fixup E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="NEVER" FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="NEVER" \ + FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 0 = $(git show | grep NEVER | wc -l) && git checkout @{-1} && @@ -444,12 +477,15 @@ test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' ' test_expect_success 'commit message used after conflict' ' git checkout -b conflict-fixup conflict-branch && base=$(git rev-parse HEAD~4) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" git rebase -i $base && - echo three > conflict && - git add conflict && - FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \ - git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" \ + git rebase -i $base && + echo three > conflict && + git add conflict && + FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \ + git rebase --continue + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -459,33 +495,38 @@ test_expect_success 'commit message used after conflict' ' test_expect_success 'commit message retained after conflict' ' git checkout -b conflict-squash conflict-branch && base=$(git rev-parse HEAD~4) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 fixup 3 squash 4" git rebase -i $base && - echo three > conflict && - git add conflict && - FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \ - git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 fixup 3 squash 4" \ + git rebase -i $base && + echo three > conflict && + git add conflict && + FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \ + git rebase --continue + ) && test $base = $(git rev-parse HEAD^) && test 2 = $(git show | grep TWICE | wc -l) && git checkout @{-1} && git branch -D conflict-squash ' -cat > expect-squash-fixup << EOF -B - -D +test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' + cat >expect-squash-fixup <<-\EOF && + B -ONCE -EOF + D -test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' ' + ONCE + EOF git checkout -b squash-fixup E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="1 fixup 2 squash 3 fixup 4" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="1 fixup 2 squash 3 fixup 4" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup && test_cmp expect-squash-fixup actual-squash-fixup && git cat-file commit HEAD@{2} | @@ -499,10 +540,13 @@ test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messa test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' git checkout -b skip-comments E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -512,10 +556,13 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' ' test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' git checkout -b skip-blank-lines E && base=$(git rev-parse HEAD~4) && - set_fake_editor && - FAKE_COMMIT_AMEND="ONCE" FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \ - EXPECT_HEADER_COUNT=4 \ - git rebase -i $base && + ( + set_fake_editor && + FAKE_COMMIT_AMEND="ONCE" \ + FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \ + EXPECT_HEADER_COUNT=4 \ + git rebase -i $base + ) && test $base = $(git rev-parse HEAD^) && test 1 = $(git show | grep ONCE | wc -l) && git checkout @{-1} && @@ -525,17 +572,21 @@ test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' ' test_expect_success 'squash works as expected' ' git checkout -b squash-works no-conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 \ - git rebase -i HEAD~3 && + ( + set_fake_editor && + FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 git rebase -i HEAD~3 + ) && test $one = $(git rev-parse HEAD~2) ' test_expect_success 'interrupted squash works as expected' ' git checkout -b interrupted-squash conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - test_must_fail env FAKE_LINES="1 squash 3 2" git rebase -i HEAD~3 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 squash 3 2" \ + git rebase -i HEAD~3 + ) && test_write_lines one two four > conflict && git add conflict && test_must_fail git rebase --continue && @@ -548,8 +599,11 @@ test_expect_success 'interrupted squash works as expected' ' test_expect_success 'interrupted squash works as expected (case 2)' ' git checkout -b interrupted-squash2 conflict-branch && one=$(git rev-parse HEAD~3) && - set_fake_editor && - test_must_fail env FAKE_LINES="3 squash 1 2" git rebase -i HEAD~3 && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="3 squash 1 2" \ + git rebase -i HEAD~3 + ) && test_write_lines one four > conflict && git add conflict && test_must_fail git rebase --continue && @@ -569,11 +623,13 @@ test_expect_success '--continue tries to commit, even for "edit"' ' git commit -m "unrelated change" && parent=$(git rev-parse HEAD^) && test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo edited > file7 && - git add file7 && - FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo edited > file7 && + git add file7 && + FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue + ) && test edited = $(git show HEAD:file7) && git show HEAD | grep chouette && test $parent = $(git rev-parse HEAD^) @@ -582,34 +638,41 @@ test_expect_success '--continue tries to commit, even for "edit"' ' test_expect_success 'aborted --continue does not squash commits after "edit"' ' old=$(git rev-parse HEAD) && test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo "edited again" > file7 && - git add file7 && - test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo "edited again" > file7 && + git add file7 && + test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue + ) && test $old = $(git rev-parse HEAD) && git rebase --abort ' test_expect_success 'auto-amend only edited commits after "edit"' ' test_tick && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i HEAD^ && - echo "edited again" > file7 && - git add file7 && - FAKE_COMMIT_MESSAGE="edited file7 again" git commit && - echo "and again" > file7 && - git add file7 && - test_tick && - test_must_fail env FAKE_COMMIT_MESSAGE="and again" git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i HEAD^ && + echo "edited again" > file7 && + git add file7 && + FAKE_COMMIT_MESSAGE="edited file7 again" git commit && + echo "and again" > file7 && + git add file7 && + test_tick && + test_must_fail env FAKE_COMMIT_MESSAGE="and again" \ + git rebase --continue + ) && git rebase --abort ' test_expect_success 'clean error after failed "exec"' ' test_tick && test_when_finished "git rebase --abort || :" && - set_fake_editor && - test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^ + ) && echo "edited again" > file7 && git add file7 && test_must_fail git rebase --continue 2>error && @@ -620,8 +683,10 @@ test_expect_success 'rebase a detached HEAD' ' grandparent=$(git rev-parse HEAD~2) && git checkout $(git rev-parse HEAD) && test_tick && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 + ) && test $grandparent = $(git rev-parse HEAD~2) ' @@ -636,9 +701,10 @@ test_expect_success 'rebase a commit violating pre-commit' ' test_must_fail git commit -m doesnt-verify file1 && git commit -m doesnt-verify --no-verify file1 && test_tick && - set_fake_editor && - FAKE_LINES=2 git rebase -i HEAD~2 - + ( + set_fake_editor && + FAKE_LINES=2 git rebase -i HEAD~2 + ) ' test_expect_success 'rebase with a file named HEAD in worktree' ' @@ -658,8 +724,10 @@ test_expect_success 'rebase with a file named HEAD in worktree' ' git commit -m "Add body" ) && - set_fake_editor && - FAKE_LINES="1 squash 2" git rebase -i @{-1} && + ( + set_fake_editor && + FAKE_LINES="1 squash 2" git rebase -i @{-1} + ) && test "$(git show -s --pretty=format:%an)" = "Squashed Away" ' @@ -670,7 +738,6 @@ test_expect_success 'do "noop" when there is nothing to cherry-pick' ' GIT_EDITOR=: git commit --amend \ --author="Somebody else <somebody@else.com>" && test $(git rev-parse branch3) != $(git rev-parse branch4) && - set_fake_editor && git rebase -i branch3 && test $(git rev-parse branch3) = $(git rev-parse branch4) @@ -695,13 +762,14 @@ test_expect_success 'submodule rebase setup' ' git commit -a -m "submodule second" ) && test_tick && - set_fake_editor && git commit -a -m "Three changes submodule" ' test_expect_success 'submodule rebase -i' ' - set_fake_editor && - FAKE_LINES="1 squash 2 3" git rebase -i A + ( + set_fake_editor && + FAKE_LINES="1 squash 2 3" git rebase -i A + ) ' test_expect_success 'submodule conflict setup' ' @@ -718,7 +786,6 @@ test_expect_success 'submodule conflict setup' ' ' test_expect_success 'rebase -i continue with only submodule staged' ' - set_fake_editor && test_must_fail git rebase -i submodule-base && git add sub && git rebase --continue && @@ -728,7 +795,6 @@ test_expect_success 'rebase -i continue with only submodule staged' ' test_expect_success 'rebase -i continue with unstaged submodule' ' git checkout submodule-topic && git reset --hard && - set_fake_editor && test_must_fail git rebase -i submodule-base && git reset && git rebase --continue && @@ -741,7 +807,6 @@ test_expect_success 'avoid unnecessary reset' ' test-tool chmtime =123456789 file3 && git update-index --refresh && HEAD=$(git rev-parse HEAD) && - set_fake_editor && git rebase -i HEAD~4 && test $HEAD = $(git rev-parse HEAD) && MTIME=$(test-tool chmtime --get file3) && @@ -750,16 +815,22 @@ test_expect_success 'avoid unnecessary reset' ' test_expect_success 'reword' ' git checkout -b reword-branch master && - set_fake_editor && - FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" git rebase -i A && - git show HEAD | grep "E changed" && - test $(git rev-parse master) != $(git rev-parse HEAD) && - test $(git rev-parse master^) = $(git rev-parse HEAD^) && - FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" git rebase -i A && - git show HEAD^ | grep "D changed" && - FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" git rebase -i A && - git show HEAD~3 | grep "B changed" && - FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" \ + git rebase -i A && + git show HEAD | grep "E changed" && + test $(git rev-parse master) != $(git rev-parse HEAD) && + test $(git rev-parse master^) = $(git rev-parse HEAD^) && + FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" \ + git rebase -i A && + git show HEAD^ | grep "D changed" && + FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" \ + git rebase -i A && + git show HEAD~3 | grep "B changed" && + FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" \ + git rebase -i A + ) && git show HEAD~2 | grep "C changed" ' @@ -770,22 +841,23 @@ test_expect_success 'rebase -i can copy notes' ' test_commit n2 && test_commit n3 && git notes add -m"a note" n3 && - set_fake_editor && git rebase -i --onto n1 n2 && test "a note" = "$(git notes show HEAD)" ' -cat >expect <<EOF -an earlier note - -a note -EOF - test_expect_success 'rebase -i can copy notes over a fixup' ' + cat >expect <<-\EOF && + an earlier note + + a note + EOF git reset --hard n3 && git notes add -m"an earlier note" n2 && - set_fake_editor && - GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" git rebase -i n1 && + ( + set_fake_editor && + GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" \ + git rebase -i n1 + ) && git notes show > output && test_cmp expect output ' @@ -794,8 +866,10 @@ test_expect_success 'rebase while detaching HEAD' ' git symbolic-ref HEAD && grandparent=$(git rev-parse HEAD~2) && test_tick && - set_fake_editor && - FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 && + ( + set_fake_editor && + FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0 + ) && test $grandparent = $(git rev-parse HEAD~2) && test_must_fail git symbolic-ref HEAD ' @@ -804,7 +878,6 @@ test_tick # Ensure that the rebased commits get a different timestamp. test_expect_success 'always cherry-pick with --no-ff' ' git checkout no-ff-branch && git tag original-no-ff-branch && - set_fake_editor && git rebase -i --no-ff A && for p in 0 1 2 do @@ -836,8 +909,10 @@ test_expect_success 'set up commits with funny messages' ' test_expect_success 'rebase-i history with funny messages' ' git rev-list A..funny >expect && test_tick && - set_fake_editor && - FAKE_LINES="1 2 3 4" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i A + ) && git rev-list A.. >actual && test_cmp expect actual ' @@ -851,9 +926,9 @@ test_expect_success 'prepare for rebase -i --exec' ' ' test_expect_success 'running "git rebase -i --exec git show HEAD"' ' - set_fake_editor && - git rebase -i --exec "git show HEAD" HEAD~2 >actual && ( + set_fake_editor && + git rebase -i --exec "git show HEAD" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -864,9 +939,9 @@ test_expect_success 'running "git rebase -i --exec git show HEAD"' ' test_expect_success 'running "git rebase --exec git show HEAD -i"' ' git reset --hard execute && - set_fake_editor && - git rebase --exec "git show HEAD" -i HEAD~2 >actual && ( + set_fake_editor && + git rebase --exec "git show HEAD" -i HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -877,9 +952,9 @@ test_expect_success 'running "git rebase --exec git show HEAD -i"' ' test_expect_success 'running "git rebase -ix git show HEAD"' ' git reset --hard execute && - set_fake_editor && - git rebase -ix "git show HEAD" HEAD~2 >actual && ( + set_fake_editor && + git rebase -ix "git show HEAD" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -891,9 +966,9 @@ test_expect_success 'running "git rebase -ix git show HEAD"' ' test_expect_success 'rebase -ix with several <CMD>' ' git reset --hard execute && - set_fake_editor && - git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && ( + set_fake_editor && + git rebase -ix "git show HEAD; pwd" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" && export FAKE_LINES && git rebase -i HEAD~2 >expect @@ -904,9 +979,9 @@ test_expect_success 'rebase -ix with several <CMD>' ' test_expect_success 'rebase -ix with several instances of --exec' ' git reset --hard execute && - set_fake_editor && - git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && ( + set_fake_editor && + git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual && FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2 exec_git_show_HEAD exec_pwd" && export FAKE_LINES && @@ -925,13 +1000,11 @@ test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' ' echo bis >bis.txt && git add bis.txt && git commit -m "fixup! two_exec" && - set_fake_editor && - ( - git checkout -b autosquash_actual && - git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual - ) && + git checkout -b autosquash_actual && + git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual && git checkout autosquash && ( + set_fake_editor && git checkout -b autosquash_expected && FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" && export FAKE_LINES && @@ -952,7 +1025,6 @@ test_expect_success 'rebase --exec works without -i ' ' test_expect_success 'rebase -i --exec without <CMD>' ' git reset --hard execute && - set_fake_editor && test_must_fail git rebase -i --exec 2>actual && test_i18ngrep "requires a value" actual && git checkout master @@ -960,8 +1032,10 @@ test_expect_success 'rebase -i --exec without <CMD>' ' test_expect_success 'rebase -i --root re-order and drop commits' ' git checkout E && - set_fake_editor && - FAKE_LINES="3 1 2 5" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="3 1 2 5" git rebase -i --root + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) && test A = $(git cat-file commit HEAD^^ | sed -ne \$p) && @@ -974,48 +1048,70 @@ test_expect_success 'rebase -i --root retain root commit author and message' ' echo B >file7 && git add file7 && GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" && - set_fake_editor && - FAKE_LINES="2" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="2" git rebase -i --root + ) && git cat-file commit HEAD | grep -q "^author Twerp Snog" && git cat-file commit HEAD | grep -q "^different author$" ' test_expect_success 'rebase -i --root temporary sentinel commit' ' git checkout B && - set_fake_editor && - test_must_fail env FAKE_LINES="2" git rebase -i --root && - git cat-file commit HEAD | grep "^tree 4b825dc642cb" && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="2" git rebase -i --root + ) && + git cat-file commit HEAD | grep "^tree $EMPTY_TREE" && git rebase --abort ' test_expect_success 'rebase -i --root fixup root commit' ' git checkout B && - set_fake_editor && - FAKE_LINES="1 fixup 2" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="1 fixup 2" git rebase -i --root + ) && test A = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git show HEAD:file1) && test 0 = $(git cat-file commit HEAD | grep -c ^parent\ ) ' -test_expect_success 'rebase -i --root reword root commit' ' +test_expect_success 'rebase -i --root reword original root commit' ' test_when_finished "test_might_fail git rebase --abort" && - git checkout -b reword-root-branch master && - set_fake_editor && - FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ - git rebase -i --root && + git checkout -b reword-original-root-branch master && + ( + set_fake_editor && + FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \ + git rebase -i --root + ) && git show HEAD^ | grep "A changed" && test -z "$(git show -s --format=%p HEAD^)" ' -test_expect_success 'rebase -i --root when root has untracked file confilct' ' +test_expect_success 'rebase -i --root reword new root commit' ' + test_when_finished "test_might_fail git rebase --abort" && + git checkout -b reword-now-root-branch master && + ( + set_fake_editor && + FAKE_LINES="reword 3 1" FAKE_COMMIT_MESSAGE="C changed" \ + git rebase -i --root + ) && + git show HEAD^ | grep "C changed" && + test -z "$(git show -s --format=%p HEAD^)" +' + +test_expect_success 'rebase -i --root when root has untracked file conflict' ' test_when_finished "reset_rebase" && git checkout -b failing-root-pick A && echo x >file2 && git rm file1 && git commit -m "remove file 1 add file 2" && echo z >file1 && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2" git rebase -i --root && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2" git rebase -i --root + ) && rm file1 && git rebase --continue && test "$(git log -1 --format=%B)" = "remove file 1 add file 2" && @@ -1025,32 +1121,38 @@ test_expect_success 'rebase -i --root when root has untracked file confilct' ' test_expect_success 'rebase -i --root reword root when root has untracked file conflict' ' test_when_finished "reset_rebase" && echo z>file1 && - set_fake_editor && - test_must_fail env FAKE_LINES="reword 1 2" \ - FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && - rm file1 && - FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="reword 1 2" \ + FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root && + rm file1 && + FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue + ) && test "$(git log -1 --format=%B HEAD^)" = "Reworded A" && test "$(git rev-list --count HEAD)" = 2 ' test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' ' - git checkout reword-root-branch && + git checkout reword-original-root-branch && git reset --hard && git checkout conflict-branch && - set_fake_editor && - test_must_fail git rebase --onto HEAD~2 HEAD~ && - test_must_fail git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail git rebase -f --apply --onto HEAD~2 HEAD~ && + test_must_fail git rebase --edit-todo + ) && git rebase --abort ' test_expect_success 'rebase --edit-todo can be used to modify todo' ' git reset --hard && git checkout no-conflict-branch^0 && - set_fake_editor && - FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && - FAKE_LINES="2 1" git rebase --edit-todo && - git rebase --continue && + ( + set_fake_editor && + FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 && + FAKE_LINES="2 1" git rebase --edit-todo && + git rebase --continue + ) && test M = $(git cat-file commit HEAD^ | sed -ne \$p) && test L = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1058,13 +1160,12 @@ test_expect_success 'rebase --edit-todo can be used to modify todo' ' test_expect_success 'rebase -i produces readable reflog' ' git reset --hard && git branch -f branch-reflog-test H && - set_fake_editor && git rebase -i --onto I F branch-reflog-test && cat >expect <<-\EOF && - rebase -i (finish): returning to refs/heads/branch-reflog-test - rebase -i (pick): H - rebase -i (pick): G - rebase -i (start): checkout I + rebase (finish): returning to refs/heads/branch-reflog-test + rebase (pick): H + rebase (pick): G + rebase (start): checkout I EOF git reflog -n4 HEAD | sed "s/[^:]*: //" >actual && @@ -1079,8 +1180,10 @@ test_expect_success 'rebase -i respects core.commentchar' ' sed -e "2,\$s/^/\\\\/" "$1" >"$1.tmp" && mv "$1.tmp" "$1" EOF - test_set_editor "$(pwd)/remove-all-but-first.sh" && - git rebase -i B && + ( + test_set_editor "$(pwd)/remove-all-but-first.sh" && + git rebase -i B + ) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' @@ -1089,9 +1192,11 @@ test_expect_success 'rebase -i respects core.commentchar=auto' ' write_script copy-edit-script.sh <<-\EOF && cp "$1" edit-script EOF - test_set_editor "$(pwd)/copy-edit-script.sh" && test_when_finished "git rebase --abort || :" && - git rebase -i HEAD^ && + ( + test_set_editor "$(pwd)/copy-edit-script.sh" && + git rebase -i HEAD^ + ) && test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)" ' @@ -1126,8 +1231,11 @@ test_expect_success 'interrupted rebase -i with --strategy and -X' ' echo five >conflict && echo Z >file1 && git commit -a -m "one file conflict" && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive -Xours conflict-branch && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive \ + -Xours conflict-branch + ) && git rebase --continue && test $(git show conflict-branch:conflict) = $(cat conflict) && test $(cat file1) = Z @@ -1142,7 +1250,7 @@ test_expect_success 'rebase -i error on commits with \ in message' ' test_expect_code 1 grep " emp" error ' -test_expect_success 'short SHA-1 setup' ' +test_expect_success SHA1 'short SHA-1 setup' ' test_when_finished "git checkout master" && git checkout --orphan collide && git rm -rf . && @@ -1154,22 +1262,37 @@ test_expect_success 'short SHA-1 setup' ' ) ' -test_expect_success 'short SHA-1 collide' ' +test_expect_success SHA1 'short SHA-1 collide' ' test_when_finished "reset_rebase && git checkout master" && git checkout collide && + colliding_sha1=6bcda37 && + test $colliding_sha1 = "$(git rev-parse HEAD | cut -c 1-7)" && ( - unset test_tick && - test_tick && - set_fake_editor && - FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \ - FAKE_LINES="reword 1 2" git rebase -i HEAD~2 - ) + unset test_tick && + test_tick && + set_fake_editor && + FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \ + FAKE_LINES="reword 1 break 2" git rebase -i HEAD~2 && + test $colliding_sha1 = "$(git rev-parse HEAD | cut -c 1-7)" && + grep "^pick $colliding_sha1 " \ + .git/rebase-merge/git-rebase-todo.tmp && + grep "^pick [0-9a-f]\{40\}" \ + .git/rebase-merge/git-rebase-todo && + grep "^pick [0-9a-f]\{40\}" \ + .git/rebase-merge/git-rebase-todo.backup && + git rebase --continue + ) && + collide2="$(git rev-parse HEAD~1 | cut -c 1-4)" && + collide3="$(git rev-parse collide3 | cut -c 1-4)" && + test "$collide2" = "$collide3" ' test_expect_success 'respect core.abbrev' ' git config core.abbrev 12 && - set_cat_todo_editor && - test_must_fail git rebase -i HEAD~4 >todo-list && + ( + set_cat_todo_editor && + test_must_fail git rebase -i HEAD~4 >todo-list + ) && test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list) ' @@ -1177,16 +1300,20 @@ test_expect_success 'todo count' ' write_script dump-raw.sh <<-\EOF && cat "$1" EOF - test_set_editor "$(pwd)/dump-raw.sh" && - git rebase -i HEAD~4 >actual && + ( + test_set_editor "$(pwd)/dump-raw.sh" && + git rebase -i HEAD~4 >actual + ) && test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual ' test_expect_success 'rebase -i commits that overwrite untracked files (pick)' ' git checkout --force branch2 && git clean -f && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i A + ) && test_cmp_rev HEAD F && test_path_is_missing file6 && >file6 && @@ -1201,8 +1328,10 @@ test_expect_success 'rebase -i commits that overwrite untracked files (squash)' git checkout --force branch2 && git clean -f && git tag original-branch2 && - set_fake_editor && - FAKE_LINES="edit 1 squash 2" git rebase -i A && + ( + set_fake_editor && + FAKE_LINES="edit 1 squash 2" git rebase -i A + ) && test_cmp_rev HEAD F && test_path_is_missing file6 && >file6 && @@ -1217,8 +1346,10 @@ test_expect_success 'rebase -i commits that overwrite untracked files (squash)' test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' ' git checkout --force branch2 && git clean -f && - set_fake_editor && - FAKE_LINES="edit 1 2" git rebase -i --no-ff A && + ( + set_fake_editor && + FAKE_LINES="edit 1 2" git rebase -i --no-ff A + ) && test $(git cat-file commit HEAD | sed -ne \$p) = F && test_path_is_missing file6 && >file6 && @@ -1241,8 +1372,10 @@ test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' ' git tag seq-onto && git reset --hard HEAD~2 && git cherry-pick seq-onto && - set_fake_editor && - test_must_fail env FAKE_LINES= git rebase -i seq-onto && + ( + set_fake_editor && + test_must_fail env FAKE_LINES= git rebase -i seq-onto + ) && test -d .git/rebase-merge && git rebase --continue && git diff --exit-code seq-onto && @@ -1261,8 +1394,10 @@ rebase_setup_and_clean () { test_expect_success 'drop' ' rebase_setup_and_clean drop-test && - set_fake_editor && - FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) && test C = $(git cat-file commit HEAD^ | sed -ne \$p) && test A = $(git cat-file commit HEAD^^ | sed -ne \$p) @@ -1271,76 +1406,185 @@ test_expect_success 'drop' ' test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' ' test_config rebase.missingCommitsCheck ignore && rebase_setup_and_clean missing-commit && - set_fake_editor && - FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual + ) && test D = $(git cat-file commit HEAD | sed -ne \$p) && test_i18ngrep \ "Successfully rebased and updated refs/heads/missing-commit" \ actual ' -cat >expect <<EOF -Warning: some commits may have been dropped accidentally. -Dropped commits (newer to older): - - $(git rev-list --pretty=oneline --abbrev-commit -1 master) -To avoid this message, use "drop" to explicitly remove a commit. - -Use 'git config rebase.missingCommitsCheck' to change the level of warnings. -The possible behaviours are: ignore, warn, error. - -Rebasing (1/4) -Rebasing (2/4) -Rebasing (3/4) -Rebasing (4/4) -Successfully rebased and updated refs/heads/missing-commit. -EOF - -cr_to_nl () { - tr '\015' '\012' -} - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' ' + cat >expect <<-EOF && + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + To avoid this message, use "drop" to explicitly remove a commit. + EOF test_config rebase.missingCommitsCheck warn && rebase_setup_and_clean missing-commit && - set_fake_editor && - FAKE_LINES="1 2 3 4" \ - git rebase -i --root 2>actual.2 && - cr_to_nl <actual.2 >actual && + ( + set_fake_editor && + FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual.2 + ) && + head -n4 actual.2 >actual && test_i18ncmp expect actual && test D = $(git cat-file commit HEAD | sed -ne \$p) ' -cat >expect <<EOF -Warning: some commits may have been dropped accidentally. -Dropped commits (newer to older): - - $(git rev-list --pretty=oneline --abbrev-commit -1 master) - - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) -To avoid this message, use "drop" to explicitly remove a commit. - -Use 'git config rebase.missingCommitsCheck' to change the level of warnings. -The possible behaviours are: ignore, warn, error. - -You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'. -Or you can abort the rebase with 'git rebase --abort'. -EOF - test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' ' + cat >expect <<-EOF && + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2) + To avoid this message, use "drop" to explicitly remove a commit. + + Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings. + The possible behaviours are: ignore, warn, error. + + You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''. + Or you can abort the rebase with '\''git rebase --abort'\''. + EOF test_config rebase.missingCommitsCheck error && rebase_setup_and_clean missing-commit && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 4" \ - git rebase -i --root 2>actual && - test_i18ncmp expect actual && - cp .git/rebase-merge/git-rebase-todo.backup \ - .git/rebase-merge/git-rebase-todo && - FAKE_LINES="1 2 drop 3 4 drop 5" \ - git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 4" \ + git rebase -i --root 2>actual && + test_i18ncmp expect actual && + cp .git/rebase-merge/git-rebase-todo.backup \ + .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 drop 3 4 drop 5" git rebase --edit-todo + ) && git rebase --continue && test D = $(git cat-file commit HEAD | sed -ne \$p) && test B = $(git cat-file commit HEAD^ | sed -ne \$p) ' +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = ignore' ' + test_config rebase.missingCommitsCheck ignore && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + FAKE_LINES="break 1 2 3 4 5" git rebase -i --root && + FAKE_LINES="1 2 3 4" git rebase --edit-todo && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = warn' ' + cat >expect <<-EOF && + error: invalid line 1: badcmd $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + To avoid this message, use "drop" to explicitly remove a commit. + EOF + head -n4 expect >expect.2 && + tail -n1 expect >>expect.2 && + tail -n4 expect.2 >expect.3 && + test_config rebase.missingCommitsCheck warn && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="bad 1 2 3 4 5" \ + git rebase -i --root && + cp .git/rebase-merge/git-rebase-todo.backup orig && + FAKE_LINES="2 3 4" git rebase --edit-todo 2>actual.2 && + head -n6 actual.2 >actual && + test_i18ncmp expect actual && + cp orig .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 3 4" git rebase --edit-todo 2>actual.2 && + head -n4 actual.2 >actual && + test_i18ncmp expect.3 actual && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase --edit-todo respects rebase.missingCommitsCheck = error' ' + cat >expect <<-EOF && + error: invalid line 1: badcmd $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + Warning: some commits may have been dropped accidentally. + Dropped commits (newer to older): + - $(git rev-list --pretty=oneline --abbrev-commit -1 master) + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~4) + To avoid this message, use "drop" to explicitly remove a commit. + + Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings. + The possible behaviours are: ignore, warn, error. + + You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''. + Or you can abort the rebase with '\''git rebase --abort'\''. + EOF + tail -n11 expect >expect.2 && + head -n3 expect.2 >expect.3 && + tail -n7 expect.2 >>expect.3 && + test_config rebase.missingCommitsCheck error && + rebase_setup_and_clean missing-commit && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="bad 1 2 3 4 5" \ + git rebase -i --root && + cp .git/rebase-merge/git-rebase-todo.backup orig && + test_must_fail env FAKE_LINES="2 3 4" \ + git rebase --edit-todo 2>actual && + test_i18ncmp expect actual && + test_must_fail git rebase --continue 2>actual && + test_i18ncmp expect.2 actual && + test_must_fail git rebase --edit-todo && + cp orig .git/rebase-merge/git-rebase-todo && + test_must_fail env FAKE_LINES="1 2 3 4" \ + git rebase --edit-todo 2>actual && + test_i18ncmp expect.3 actual && + test_must_fail git rebase --continue 2>actual && + test_i18ncmp expect.3 actual && + cp orig .git/rebase-merge/git-rebase-todo && + FAKE_LINES="1 2 3 4 drop 5" git rebase --edit-todo && + git rebase --continue 2>actual + ) && + test D = $(git cat-file commit HEAD | sed -ne \$p) && + test_i18ngrep \ + "Successfully rebased and updated refs/heads/missing-commit" \ + actual +' + +test_expect_success 'rebase.missingCommitsCheck = error after resolving conflicts' ' + test_config rebase.missingCommitsCheck error && + ( + set_fake_editor && + FAKE_LINES="drop 1 break 2 3 4" git rebase -i A E + ) && + git rebase --edit-todo && + test_must_fail git rebase --continue && + echo x >file1 && + git add file1 && + git rebase --continue +' + +test_expect_success 'rebase.missingCommitsCheck = error when editing for a second time' ' + test_config rebase.missingCommitsCheck error && + ( + set_fake_editor && + FAKE_LINES="1 break 2 3" git rebase -i A D && + cp .git/rebase-merge/git-rebase-todo todo && + test_must_fail env FAKE_LINES=2 git rebase --edit-todo && + GIT_SEQUENCE_EDITOR="cp todo" git rebase --edit-todo && + git rebase --continue + ) +' + test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' ' rebase_setup_and_clean abbrevcmd && test_commit "first" file1.txt "first line" first && @@ -1356,21 +1600,27 @@ test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and e x git show HEAD EOF git checkout abbrevcmd && - set_cat_todo_editor && test_config rebase.abbreviateCommands true && - test_must_fail git rebase -i --exec "git show HEAD" \ - --autosquash master >actual && + ( + set_cat_todo_editor && + test_must_fail git rebase -i --exec "git show HEAD" \ + --autosquash master >actual + ) && test_cmp expected actual ' test_expect_success 'static check of bad command' ' rebase_setup_and_clean bad-cmd && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \ git rebase -i --root 2>actual && - test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" actual && - test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && - FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo && + test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" \ + actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." \ + actual && + FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo + ) && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) && test C = $(git cat-file commit HEAD^ | sed -ne \$p) @@ -1386,19 +1636,24 @@ test_expect_success 'tabs and spaces are accepted in the todolist' ' ) >"$1.new" mv "$1.new" "$1" EOF - test_set_editor "$(pwd)/add-indent.sh" && - git rebase -i HEAD^^^ && + ( + test_set_editor "$(pwd)/add-indent.sh" && + git rebase -i HEAD^^^ + ) && test E = $(git cat-file commit HEAD | sed -ne \$p) ' test_expect_success 'static check of bad SHA-1' ' rebase_setup_and_clean bad-sha && - set_fake_editor && - test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ - git rebase -i --root 2>actual && - test_i18ngrep "edit XXXXXXX False commit" actual && - test_i18ngrep "You can fix this with .git rebase --edit-todo.." actual && - FAKE_LINES="1 2 4 5 6" git rebase --edit-todo && + ( + set_fake_editor && + test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \ + git rebase -i --root 2>actual && + test_i18ngrep "edit XXXXXXX False commit" actual && + test_i18ngrep "You can fix this with .git rebase --edit-todo.." \ + actual && + FAKE_LINES="1 2 4 5 6" git rebase --edit-todo + ) && git rebase --continue && test E = $(git cat-file commit HEAD | sed -ne \$p) ' @@ -1415,42 +1670,73 @@ test_expect_success 'editor saves as CR/LF' ' ) ' -SQ="'" test_expect_success 'rebase -i --gpg-sign=<key-id>' ' test_when_finished "test_might_fail git rebase --abort" && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ - >out 2>err && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \ + HEAD^ >out 2>err + ) && test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err ' test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' ' test_when_finished "test_might_fail git rebase --abort" && test_config commit.gpgsign true && - set_fake_editor && - FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" HEAD^ \ - >out 2>err && + ( + set_fake_editor && + FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \ + HEAD^ >out 2>err + ) && test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err ' test_expect_success 'valid author header after --root swap' ' rebase_setup_and_clean author-header no-conflict-branch && - set_fake_editor && git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && git cat-file commit HEAD | grep ^author >expected && - FAKE_LINES="5 1" git rebase -i --root && + ( + set_fake_editor && + FAKE_LINES="5 1" git rebase -i --root + ) && git cat-file commit HEAD^ | grep ^author >actual && test_cmp expected actual ' test_expect_success 'valid author header when author contains single quote' ' rebase_setup_and_clean author-header no-conflict-branch && - set_fake_editor && git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit && git cat-file commit HEAD | grep ^author >expected && - FAKE_LINES="2" git rebase -i HEAD~2 && + ( + set_fake_editor && + FAKE_LINES="2" git rebase -i HEAD~2 + ) && git cat-file commit HEAD | grep ^author >actual && test_cmp expected actual ' +test_expect_success 'post-commit hook is called' ' + test_when_finished "rm -f .git/hooks/post-commit" && + >actual && + mkdir -p .git/hooks && + write_script .git/hooks/post-commit <<-\EOS && + git rev-parse HEAD >>actual + EOS + ( + set_fake_editor && + FAKE_LINES="edit 4 1 reword 2 fixup 3" git rebase -i A E && + echo x>file3 && + git add file3 && + FAKE_COMMIT_MESSAGE=edited git rebase --continue + ) && + git rev-parse HEAD@{5} HEAD@{4} HEAD@{3} HEAD@{2} HEAD@{1} HEAD \ + >expect && + test_cmp expect actual +' + +# This must be the last test in this file +test_expect_success '$EDITOR and friends are unchanged' ' + test_editor_unchanged +' + test_done diff --git a/t/t3406-rebase-message.sh b/t/t3406-rebase-message.sh index f64b130..61b76f3 100755 --- a/t/t3406-rebase-message.sh +++ b/t/t3406-rebase-message.sh @@ -17,38 +17,30 @@ test_expect_success 'setup' ' git tag start ' -cat >expect <<\EOF -Already applied: 0001 A -Already applied: 0002 B -Committed: 0003 Z -EOF - test_expect_success 'rebase -m' ' - git rebase -m master >report && - sed -n -e "/^Already applied: /p" \ - -e "/^Committed: /p" report >actual && - test_cmp expect actual + git rebase -m master >actual && + test_must_be_empty actual ' test_expect_success 'rebase against master twice' ' - git rebase master >out && + git rebase --apply master >out && test_i18ngrep "Current branch topic is up to date" out ' test_expect_success 'rebase against master twice with --force' ' - git rebase --force-rebase master >out && + git rebase --force-rebase --apply master >out && test_i18ngrep "Current branch topic is up to date, rebase forced" out ' test_expect_success 'rebase against master twice from another branch' ' git checkout topic^ && - git rebase master topic >out && + git rebase --apply master topic >out && test_i18ngrep "Current branch topic is up to date" out ' test_expect_success 'rebase fast-forward to master' ' git checkout topic^ && - git rebase topic >out && + git rebase --apply topic >out && test_i18ngrep "Fast-forwarded HEAD to topic" out ' @@ -97,7 +89,7 @@ test_expect_success 'GIT_REFLOG_ACTION' ' git checkout -b reflog-topic start && test_commit reflog-to-rebase && - git rebase reflog-onto && + git rebase --apply reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && rebase finished: returning to refs/heads/reflog-topic @@ -107,7 +99,7 @@ test_expect_success 'GIT_REFLOG_ACTION' ' test_cmp expect actual && git checkout -b reflog-prefix reflog-to-rebase && - GIT_REFLOG_ACTION=change-the-reflog git rebase reflog-onto && + GIT_REFLOG_ACTION=change-the-reflog git rebase --apply reflog-onto && git log -g --format=%gs -3 >actual && cat >expect <<-\EOF && rebase finished: returning to refs/heads/reflog-prefix diff --git a/t/t3407-rebase-abort.sh b/t/t3407-rebase-abort.sh index 910f218..97efea0 100755 --- a/t/t3407-rebase-abort.sh +++ b/t/t3407-rebase-abort.sh @@ -96,14 +96,14 @@ testrebase() { ' } -testrebase "" .git/rebase-apply +testrebase " --apply" .git/rebase-apply testrebase " --merge" .git/rebase-merge -test_expect_success 'rebase --quit' ' +test_expect_success 'rebase --apply --quit' ' cd "$work_dir" && # Clean up the state from the previous one git reset --hard pre-rebase && - test_must_fail git rebase master && + test_must_fail git rebase --apply master && test_path_is_dir .git/rebase-apply && head_before=$(git rev-parse HEAD) && git rebase --quit && diff --git a/t/t3415-rebase-autosquash.sh b/t/t3415-rebase-autosquash.sh index 13f5688..093de90 100755 --- a/t/t3415-rebase-autosquash.sh +++ b/t/t3415-rebase-autosquash.sh @@ -25,6 +25,13 @@ test_expect_success setup ' ' test_auto_fixup () { + no_squash= && + if test "x$1" = 'x!' + then + no_squash=true + shift + fi && + git reset --hard base && echo 1 >file1 && git add -u && @@ -35,10 +42,19 @@ test_auto_fixup () { test_tick && git rebase $2 -i HEAD^^^ && git log --oneline >actual && - test_line_count = 3 actual && - git diff --exit-code $1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep first | wc -l) + if test -n "$no_squash" + then + test_line_count = 4 actual + else + test_line_count = 3 actual && + git diff --exit-code $1 && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = 1 actual + fi } test_expect_success 'auto fixup (option)' ' @@ -48,12 +64,19 @@ test_expect_success 'auto fixup (option)' ' test_expect_success 'auto fixup (config)' ' git config rebase.autosquash true && test_auto_fixup final-fixup-config-true && - test_must_fail test_auto_fixup fixup-config-true-no --no-autosquash && + test_auto_fixup ! fixup-config-true-no --no-autosquash && git config rebase.autosquash false && - test_must_fail test_auto_fixup final-fixup-config-false + test_auto_fixup ! final-fixup-config-false ' test_auto_squash () { + no_squash= && + if test "x$1" = 'x!' + then + no_squash=true + shift + fi && + git reset --hard base && echo 1 >file1 && git add -u && @@ -64,10 +87,19 @@ test_auto_squash () { test_tick && git rebase $2 -i HEAD^^^ && git log --oneline >actual && - test_line_count = 3 actual && - git diff --exit-code $1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 2 = $(git cat-file commit HEAD^ | grep first | wc -l) + if test -n "$no_squash" + then + test_line_count = 4 actual + else + test_line_count = 3 actual && + git diff --exit-code $1 && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = 2 actual + fi } test_expect_success 'auto squash (option)' ' @@ -77,9 +109,9 @@ test_expect_success 'auto squash (option)' ' test_expect_success 'auto squash (config)' ' git config rebase.autosquash true && test_auto_squash final-squash-config-true && - test_must_fail test_auto_squash squash-config-true-no --no-autosquash && + test_auto_squash ! squash-config-true-no --no-autosquash && git config rebase.autosquash false && - test_must_fail test_auto_squash final-squash-config-false + test_auto_squash ! final-squash-config-false ' test_expect_success 'misspelled auto squash' ' @@ -94,7 +126,8 @@ test_expect_success 'misspelled auto squash' ' git log --oneline >actual && test_line_count = 4 actual && git diff --exit-code final-missquash && - test 0 = $(git rev-list final-missquash...HEAD | wc -l) + git rev-list final-missquash...HEAD >list && + test_must_be_empty list ' test_expect_success 'auto squash that matches 2 commits' ' @@ -113,9 +146,15 @@ test_expect_success 'auto squash that matches 2 commits' ' git log --oneline >actual && test_line_count = 4 actual && git diff --exit-code final-multisquash && - test 1 = "$(git cat-file blob HEAD^^:file1)" && - test 2 = $(git cat-file commit HEAD^^ | grep first | wc -l) && - test 1 = $(git cat-file commit HEAD | grep first | wc -l) + echo 1 >expect && + git cat-file blob HEAD^^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^^ >commit && + grep first commit >actual && + test_line_count = 2 actual && + git cat-file commit HEAD >commit && + grep first commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches a commit after the squash' ' @@ -134,25 +173,38 @@ test_expect_success 'auto squash that matches a commit after the squash' ' git log --oneline >actual && test_line_count = 5 actual && git diff --exit-code final-presquash && - test 0 = "$(git cat-file blob HEAD^^:file1)" && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD | grep third | wc -l) && - test 1 = $(git cat-file commit HEAD^ | grep third | wc -l) + echo 0 >expect && + git cat-file blob HEAD^^:file1 >actual && + test_cmp expect actual && + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD >commit && + grep third commit >actual && + test_line_count = 1 actual && + git cat-file commit HEAD^ >commit && + grep third commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches a sha1' ' git reset --hard base && echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short HEAD^)" && + oid=$(git rev-parse --short HEAD^) && + git commit -m "squash! $oid" && git tag final-shasquash && test_tick && git rebase --autosquash -i HEAD^^^ && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-shasquash && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 1 actual ' test_expect_success 'auto squash that matches longer sha1' ' @@ -160,15 +212,20 @@ test_expect_success 'auto squash that matches longer sha1' ' echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short=11 HEAD^)" && + oid=$(git rev-parse --short=11 HEAD^) && + git commit -m "squash! $oid" && git tag final-longshasquash && test_tick && git rebase --autosquash -i HEAD^^^ && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-longshasquash && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 1 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 1 actual ' test_auto_commit_flags () { @@ -183,8 +240,12 @@ test_auto_commit_flags () { git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-commit-$1 && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test $2 = $(git cat-file commit HEAD^ | grep first | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && + test_line_count = $2 actual } test_expect_success 'use commit --fixup' ' @@ -210,11 +271,15 @@ test_auto_fixup_fixup () { ( set_cat_todo_editor && test_must_fail git rebase --autosquash -i HEAD^^^^ >actual && + head=$(git rev-parse --short HEAD) && + parent1=$(git rev-parse --short HEAD^) && + parent2=$(git rev-parse --short HEAD^^) && + parent3=$(git rev-parse --short HEAD^^^) && cat >expected <<-EOF && - pick $(git rev-parse --short HEAD^^^) first commit - $1 $(git rev-parse --short HEAD^) $1! first - $1 $(git rev-parse --short HEAD) $1! $2! first - pick $(git rev-parse --short HEAD^^) second commit + pick $parent3 first commit + $1 $parent1 $1! first + $1 $head $1! $2! first + pick $parent2 second commit EOF test_cmp expected actual ) && @@ -222,13 +287,17 @@ test_auto_fixup_fixup () { git log --oneline >actual && test_line_count = 3 actual git diff --exit-code "final-$1-$2" && - test 2 = "$(git cat-file blob HEAD^:file1)" && + echo 2 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep first commit >actual && if test "$1" = "fixup" then - test 1 = $(git cat-file commit HEAD^ | grep first | wc -l) + test_line_count = 1 actual elif test "$1" = "squash" then - test 3 = $(git cat-file commit HEAD^ | grep first | wc -l) + test_line_count = 3 actual else false fi @@ -256,19 +325,25 @@ test_expect_success C_LOCALE_OUTPUT 'autosquash with custom inst format' ' echo 2 >file1 && git add -u && test_tick && - git commit -m "squash! $(git rev-parse --short HEAD^)" && + oid=$(git rev-parse --short HEAD^) && + git commit -m "squash! $oid" && echo 1 >file1 && git add -u && test_tick && - git commit -m "squash! $(git log -n 1 --format=%s HEAD~2)" && + subject=$(git log -n 1 --format=%s HEAD~2) && + git commit -m "squash! $subject" && git tag final-squash-instFmt && test_tick && git rebase --autosquash -i HEAD~4 && git log --oneline >actual && test_line_count = 3 actual && git diff --exit-code final-squash-instFmt && - test 1 = "$(git cat-file blob HEAD^:file1)" && - test 2 = $(git cat-file commit HEAD^ | grep squash | wc -l) + echo 1 >expect && + git cat-file blob HEAD^:file1 >actual && + test_cmp expect actual && + git cat-file commit HEAD^ >commit && + grep squash commit >actual && + test_line_count = 2 actual ' test_expect_success 'autosquash with empty custom instructionFormat' ' @@ -277,7 +352,7 @@ test_expect_success 'autosquash with empty custom instructionFormat' ' ( set_cat_todo_editor && test_must_fail git -c rebase.instructionFormat= \ - rebase --autosquash --force -i HEAD^ >actual && + rebase --autosquash --force-rebase -i HEAD^ >actual && git log -1 --format="pick %h %s" >expect && test_cmp expect actual ) diff --git a/t/t3416-rebase-onto-threedots.sh b/t/t3416-rebase-onto-threedots.sh index ddf2f64..9c25484 100755 --- a/t/t3416-rebase-onto-threedots.sh +++ b/t/t3416-rebase-onto-threedots.sh @@ -99,7 +99,64 @@ test_expect_success 'rebase -i --onto master...side' ' git checkout side && git reset --hard K && + set_fake_editor && test_must_fail git rebase -i --onto master...side J ' +test_expect_success 'rebase --keep-base --onto incompatible' ' + test_must_fail git rebase --keep-base --onto master... +' + +test_expect_success 'rebase --keep-base --root incompatible' ' + test_must_fail git rebase --keep-base --root +' + +test_expect_success 'rebase --keep-base master from topic' ' + git reset --hard && + git checkout topic && + git reset --hard G && + + git rebase --keep-base master && + git rev-parse C >base.expect && + git merge-base master HEAD >base.actual && + test_cmp base.expect base.actual && + + git rev-parse HEAD~2 >actual && + git rev-parse C^0 >expect && + test_cmp expect actual +' + +test_expect_success 'rebase --keep-base master from side' ' + git reset --hard && + git checkout side && + git reset --hard K && + + test_must_fail git rebase --keep-base master +' + +test_expect_success 'rebase -i --keep-base master from topic' ' + git reset --hard && + git checkout topic && + git reset --hard G && + + set_fake_editor && + EXPECT_COUNT=2 git rebase -i --keep-base master && + git rev-parse C >base.expect && + git merge-base master HEAD >base.actual && + test_cmp base.expect base.actual && + + git rev-parse HEAD~2 >actual && + git rev-parse C^0 >expect && + test_cmp expect actual +' + +test_expect_success 'rebase -i --keep-base master from side' ' + git reset --hard && + git checkout side && + git reset --hard K && + + set_fake_editor && + test_must_fail git rebase -i --keep-base master +' + test_done diff --git a/t/t3418-rebase-continue.sh b/t/t3418-rebase-continue.sh index 0210b2a..7a2da97 100755 --- a/t/t3418-rebase-continue.sh +++ b/t/t3418-rebase-continue.sh @@ -120,6 +120,20 @@ test_expect_success REBASE_P 'rebase passes merge strategy options correctly' ' git rebase --continue ' +test_expect_success 'rebase -r passes merge strategy options correctly' ' + rm -fr .git/rebase-* && + git reset --hard commit-new-file-F3-on-topic-branch && + test_commit merge-theirs && + git reset --hard HEAD^ && + test_commit some-other-commit && + test_tick && + git merge --no-ff merge-theirs && + FAKE_LINES="1 3 edit 4 5 7 8 9" git rebase -i -f -r -m \ + -s recursive --strategy-option=theirs HEAD~2 && + test_commit force-change-ours && + git rebase --continue +' + test_expect_success '--skip after failed fixup cleans commit message' ' test_when_finished "test_might_fail git rebase --abort" && git checkout -b with-conflicting-fixup && @@ -254,4 +268,23 @@ test_expect_success 'the todo command "break" works' ' test_path_is_file execed ' +test_expect_success '--reschedule-failed-exec' ' + test_when_finished "git rebase --abort" && + test_must_fail git rebase -x false --reschedule-failed-exec HEAD^ && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + git rebase --abort && + test_must_fail git -c rebase.rescheduleFailedExec=true \ + rebase -x false HEAD^ 2>err && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + test_i18ngrep "has been rescheduled" err +' + +test_expect_success 'rebase.reschedulefailedexec only affects `rebase -i`' ' + test_config rebase.reschedulefailedexec true && + test_must_fail git rebase -x false HEAD^ && + grep "^exec false" .git/rebase-merge/git-rebase-todo && + git rebase --abort && + git rebase HEAD^ +' + test_done diff --git a/t/t3419-rebase-patch-id.sh b/t/t3419-rebase-patch-id.sh index 49f548c..9455266 100755 --- a/t/t3419-rebase-patch-id.sh +++ b/t/t3419-rebase-patch-id.sh @@ -80,7 +80,8 @@ do_tests () { git commit -q -m "change big file again" && git checkout -q other^{} && git rebase master && - test_must_fail test -n "$(git rev-list master...HEAD~)" + git rev-list master...HEAD~ >revs && + test_must_be_empty revs ' test_expect_success $pr 'do not drop patch' ' diff --git a/t/t3420-rebase-autostash.sh b/t/t3420-rebase-autostash.sh index 4c7494c..b97ea62 100755 --- a/t/t3420-rebase-autostash.sh +++ b/t/t3420-rebase-autostash.sh @@ -30,13 +30,13 @@ test_expect_success setup ' echo conflicting-change >file2 && git add . && test_tick && - git commit -m "related commit" + git commit -m "related commit" && + remove_progress_re="$(printf "s/.*\\r//")" ' -create_expected_success_am () { +create_expected_success_apply () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit First, rewinding head to replay your work on top of it... Applying: second commit Applying: third commit @@ -44,54 +44,17 @@ create_expected_success_am () { EOF } -create_expected_success_interactive () { - q_to_cr >expected <<-EOF - $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - Rebasing (1/2)QRebasing (2/2)QApplied autostash. - Successfully rebased and updated refs/heads/rebased-feature-branch. - EOF -} - create_expected_success_merge () { - cat >expected <<-EOF + q_to_cr >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - First, rewinding head to replay your work on top of it... - Merging unrelated-onto-branch with HEAD~1 - Merging: - $(git rev-parse --short unrelated-onto-branch) unrelated commit - $(git rev-parse --short feature-branch^) second commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~2) initial commit - [detached HEAD $(git rev-parse --short rebased-feature-branch~1)] second commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:14:13 2005 -0700 - 2 files changed, 2 insertions(+) - create mode 100644 file1 - create mode 100644 file2 - Committed: 0001 second commit - Merging unrelated-onto-branch with HEAD~0 - Merging: - $(git rev-parse --short rebased-feature-branch~1) second commit - $(git rev-parse --short feature-branch) third commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~1) second commit - [detached HEAD $(git rev-parse --short rebased-feature-branch)] third commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:15:13 2005 -0700 - 1 file changed, 1 insertion(+) - create mode 100644 file3 - Committed: 0002 third commit - All done. Applied autostash. + Successfully rebased and updated refs/heads/rebased-feature-branch. EOF } -create_expected_failure_am () { +create_expected_failure_apply () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit First, rewinding head to replay your work on top of it... Applying: second commit Applying: third commit @@ -101,51 +64,13 @@ create_expected_failure_am () { EOF } -create_expected_failure_interactive () { - q_to_cr >expected <<-EOF - $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - Rebasing (1/2)QRebasing (2/2)QApplying autostash resulted in conflicts. - Your changes are safe in the stash. - You can run "git stash pop" or "git stash drop" at any time. - Successfully rebased and updated refs/heads/rebased-feature-branch. - EOF -} - create_expected_failure_merge () { cat >expected <<-EOF $(grep "^Created autostash: [0-9a-f][0-9a-f]*\$" actual) - HEAD is now at $(git rev-parse --short feature-branch) third commit - First, rewinding head to replay your work on top of it... - Merging unrelated-onto-branch with HEAD~1 - Merging: - $(git rev-parse --short unrelated-onto-branch) unrelated commit - $(git rev-parse --short feature-branch^) second commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~2) initial commit - [detached HEAD $(git rev-parse --short rebased-feature-branch~1)] second commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:14:13 2005 -0700 - 2 files changed, 2 insertions(+) - create mode 100644 file1 - create mode 100644 file2 - Committed: 0001 second commit - Merging unrelated-onto-branch with HEAD~0 - Merging: - $(git rev-parse --short rebased-feature-branch~1) second commit - $(git rev-parse --short feature-branch) third commit - found 1 common ancestor: - $(git rev-parse --short feature-branch~1) second commit - [detached HEAD $(git rev-parse --short rebased-feature-branch)] third commit - Author: A U Thor <author@example.com> - Date: Thu Apr 7 15:15:13 2005 -0700 - 1 file changed, 1 insertion(+) - create mode 100644 file3 - Committed: 0002 third commit - All done. Applying autostash resulted in conflicts. Your changes are safe in the stash. You can run "git stash pop" or "git stash drop" at any time. + Successfully rebased and updated refs/heads/rebased-feature-branch. EOF } @@ -176,9 +101,13 @@ testrebase () { test_expect_success "rebase$type --autostash: check output" ' test_when_finished git branch -D rebased-feature-branch && - suffix=${type#\ --} && suffix=${suffix:-am} && + suffix=${type#\ --} && suffix=${suffix:-apply} && + if test ${suffix} = "interactive"; then + suffix=merge + fi && create_expected_success_$suffix && - test_i18ncmp expected actual + sed "$remove_progress_re" <actual >actual2 && + test_i18ncmp expected actual2 ' test_expect_success "rebase$type: dirty index, non-conflicting rebase" ' @@ -273,9 +202,13 @@ testrebase () { test_expect_success "rebase$type: check output with conflicting stash" ' test_when_finished git branch -D rebased-feature-branch && - suffix=${type#\ --} && suffix=${suffix:-am} && + suffix=${type#\ --} && suffix=${suffix:-apply} && + if test ${suffix} = "interactive"; then + suffix=merge + fi && create_expected_failure_$suffix && - test_i18ncmp expected actual + sed "$remove_progress_re" <actual >actual2 && + test_i18ncmp expected actual2 ' } @@ -301,7 +234,7 @@ test_expect_success "rebase: noop rebase" ' git checkout feature-branch ' -testrebase "" .git/rebase-apply +testrebase " --apply" .git/rebase-apply testrebase " --merge" .git/rebase-merge testrebase " --interactive" .git/rebase-merge @@ -369,4 +302,12 @@ test_expect_success 'branch is left alone when possible' ' test unchanged-branch = "$(git rev-parse --abbrev-ref HEAD)" ' +test_expect_success 'never change active branch' ' + git checkout -b not-the-feature-branch unrelated-onto-branch && + test_when_finished "git reset --hard && git checkout master" && + echo changed >file0 && + git rebase --autostash not-the-feature-branch feature-branch && + test_cmp_rev not-the-feature-branch unrelated-onto-branch +' + test_done diff --git a/t/t3421-rebase-topology-linear.sh b/t/t3421-rebase-topology-linear.sh index 23ad4cf..cf8dfd6 100755 --- a/t/t3421-rebase-topology-linear.sh +++ b/t/t3421-rebase-topology-linear.sh @@ -26,11 +26,21 @@ test_run_rebase () { test_linear_range 'd e' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p +test_expect_success 'setup branches and remote tracking' ' + git tag -l >tags && + for tag in $(cat tags) + do + git branch branch-$tag $tag || return 1 + done && + git remote add origin "file://$PWD" && + git fetch origin +' + test_run_rebase () { result=$1 shift @@ -40,7 +50,7 @@ test_run_rebase () { test_cmp_rev e HEAD " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -51,12 +61,13 @@ test_run_rebase () { test_expect_$result "rebase $* -f rewrites even if upstream is an ancestor" " reset_rebase && git rebase $* -f b e && - ! test_cmp_rev e HEAD && + test_cmp_rev ! e HEAD && test_cmp_rev b HEAD~2 && test_linear_range 'd e' b.. " } -test_run_rebase success '' +test_run_rebase success --apply +test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -64,13 +75,31 @@ test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 shift + test_expect_$result "rebase $* -f rewrites even if remote upstream is an ancestor" " + reset_rebase && + git rebase $* -f branch-b branch-e && + test_cmp_rev ! branch-e origin/branch-e && + test_cmp_rev branch-b HEAD~2 && + test_linear_range 'd e' branch-b.. + " +} +test_run_rebase success --apply +test_run_rebase success --fork-point +test_run_rebase success -m +test_run_rebase success -i +test_have_prereq !REBASE_P || test_run_rebase success -p + +test_run_rebase () { + result=$1 + shift test_expect_$result "rebase $* fast-forwards from ancestor of upstream" " reset_rebase && git rebase $* e b && test_cmp_rev e HEAD " } -test_run_rebase success '' +test_run_rebase success --apply +test_run_rebase success --fork-point test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -110,8 +139,8 @@ test_run_rebase () { test_linear_range 'd i' h.. " } -test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success --apply +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -125,8 +154,8 @@ test_run_rebase () { test_linear_range 'd' h.. " } -test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success --apply +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -140,8 +169,8 @@ test_run_rebase () { test_linear_range 'd i' f.. " } -test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success --apply +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -155,7 +184,7 @@ test_run_rebase () { test_linear_range 'd gp i' h.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -176,17 +205,17 @@ test_expect_success 'setup of linear history for empty commit tests' ' test_run_rebase () { result=$1 shift - test_expect_$result "rebase $* drops empty commit" " + test_expect_$result "rebase $* keeps begin-empty commits" " reset_rebase && - git rebase $* c l && - test_cmp_rev c HEAD~2 && - test_linear_range 'd l' c.. + git rebase $* j l && + test_cmp_rev c HEAD~4 && + test_linear_range 'j d k l' c.. " } -test_run_rebase success '' +test_run_rebase failure --apply test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase success -p +test_have_prereq !REBASE_P || test_run_rebase failure -p test_run_rebase () { result=$1 @@ -198,10 +227,10 @@ test_run_rebase () { test_linear_range 'd k l' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase () { result=$1 @@ -213,10 +242,10 @@ test_run_rebase () { test_linear_range 'd k l' j.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i -test_have_prereq !REBASE_P || test_run_rebase failure -p +test_have_prereq !REBASE_P || test_run_rebase success -p test_run_rebase success --rebase-merges # m @@ -253,7 +282,7 @@ test_run_rebase () { test_linear_range 'x y' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -268,7 +297,7 @@ test_run_rebase () { test_linear_range 'x y' c.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -283,8 +312,8 @@ test_run_rebase () { test_linear_range 'x y' m.. " } -test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success --apply +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase success -p @@ -299,7 +328,7 @@ test_run_rebase () { " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -314,8 +343,8 @@ test_run_rebase () { test_linear_range 'x y' m.. " } -test_run_rebase success '' -test_run_rebase failure -m +test_run_rebase success --apply +test_run_rebase success -m test_run_rebase success -i test_have_prereq !REBASE_P || test_run_rebase failure -p @@ -339,7 +368,7 @@ test_run_rebase () { test_expect_$result "rebase $* -f --root on linear history causes re-write" " reset_rebase && git rebase $* -f --root c && - ! test_cmp_rev a HEAD~2 && + test_cmp_rev ! a HEAD~2 && test_linear_range 'a b c' HEAD " } diff --git a/t/t3422-rebase-incompatible-options.sh b/t/t3422-rebase-incompatible-options.sh index bb78a6e..50e7960 100755 --- a/t/t3422-rebase-incompatible-options.sh +++ b/t/t3422-rebase-incompatible-options.sh @@ -65,24 +65,15 @@ test_rebase_am_only --ignore-whitespace test_rebase_am_only --committer-date-is-author-date test_rebase_am_only -C4 -test_expect_success '--preserve-merges incompatible with --signoff' ' +test_expect_success REBASE_P '--preserve-merges incompatible with --signoff' ' git checkout B^0 && test_must_fail git rebase --preserve-merges --signoff A ' -test_expect_success '--preserve-merges incompatible with --rebase-merges' ' +test_expect_success REBASE_P \ + '--preserve-merges incompatible with --rebase-merges' ' git checkout B^0 && test_must_fail git rebase --preserve-merges --rebase-merges A ' -test_expect_success '--rebase-merges incompatible with --strategy' ' - git checkout B^0 && - test_must_fail git rebase --rebase-merges -s resolve A -' - -test_expect_success '--rebase-merges incompatible with --strategy-option' ' - git checkout B^0 && - test_must_fail git rebase --rebase-merges -Xignore-space-change A -' - test_done diff --git a/t/t3424-rebase-empty.sh b/t/t3424-rebase-empty.sh new file mode 100755 index 0000000..98fc2a5 --- /dev/null +++ b/t/t3424-rebase-empty.sh @@ -0,0 +1,126 @@ +#!/bin/sh + +test_description='git rebase of commits that start or become empty' + +. ./test-lib.sh + +test_expect_success 'setup test repository' ' + test_write_lines 1 2 3 4 5 6 7 8 9 10 >numbers && + test_write_lines A B C D E F G H I J >letters && + git add numbers letters && + git commit -m A && + + git branch upstream && + git branch localmods && + + git checkout upstream && + test_write_lines A B C D E >letters && + git add letters && + git commit -m B && + + test_write_lines 1 2 3 4 five 6 7 8 9 ten >numbers && + git add numbers && + git commit -m C && + + git checkout localmods && + test_write_lines 1 2 3 4 five 6 7 8 9 10 >numbers && + git add numbers && + git commit -m C2 && + + git commit --allow-empty -m D && + + test_write_lines A B C D E >letters && + git add letters && + git commit -m "Five letters ought to be enough for anybody" +' + +test_expect_failure 'rebase (apply-backend)' ' + test_when_finished "git rebase --abort" && + git checkout -B testing localmods && + # rebase (--apply) should not drop commits that start empty + git rebase --apply upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=drop' ' + git checkout -B testing localmods && + git rebase --merge --empty=drop upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge uses default of --empty=drop' ' + git checkout -B testing localmods && + git rebase --merge upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=keep' ' + git checkout -B testing localmods && + git rebase --merge --empty=keep upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --merge --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --merge --empty=ask upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=drop' ' + git checkout -B testing localmods && + git rebase --interactive --empty=drop upstream && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=keep' ' + git checkout -B testing localmods && + git rebase --interactive --empty=keep upstream && + + test_write_lines D C2 C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --interactive --empty=ask upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'rebase --interactive uses default of --empty=ask' ' + git checkout -B testing localmods && + test_must_fail git rebase --interactive upstream && + + git rebase --skip && + + test_write_lines D C B A >expect && + git log --format=%s >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t3425-rebase-topology-merges.sh b/t/t3425-rebase-topology-merges.sh index 5f892e3..e42faa4 100755 --- a/t/t3425-rebase-topology-merges.sh +++ b/t/t3425-rebase-topology-merges.sh @@ -54,7 +54,7 @@ test_run_rebase () { test_linear_range 'n o' e.. " } -test_run_rebase success '' +test_run_rebase success --apply test_run_rebase success -m test_run_rebase success -i @@ -70,9 +70,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" d.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'e n o' '' -test_run_rebase success 'e n o' -m +test_run_rebase success 'n o e' --apply +test_run_rebase success 'n o e' -m test_run_rebase success 'n o e' -i test_run_rebase () { @@ -87,9 +86,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'd e n o' '' -test_run_rebase success 'd e n o' -m +test_run_rebase success 'd n o e' --apply +test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i test_run_rebase () { @@ -104,9 +102,8 @@ test_run_rebase () { test_linear_range "\'"$expected"\'" c.. " } -#TODO: make order consistent across all flavors of rebase -test_run_rebase success 'd e n o' '' -test_run_rebase success 'd e n o' -m +test_run_rebase success 'd n o e' --apply +test_run_rebase success 'd n o e' -m test_run_rebase success 'd n o e' -i if ! test_have_prereq REBASE_P; then diff --git a/t/t3427-rebase-subtree.sh b/t/t3427-rebase-subtree.sh index 3780877..79e43a3 100755 --- a/t/t3427-rebase-subtree.sh +++ b/t/t3427-rebase-subtree.sh @@ -11,108 +11,99 @@ commit_message() { git log --pretty=format:%s -1 "$1" } +# There are a few bugs in the rebase with regards to the subtree strategy, and +# this test script tries to document them. First, the following commit history +# is generated (the onelines are shown, time flows from left to right): +# +# master1 - master2 - master3 +# \ +# README ---------------------- Add subproject master - master4 - files_subtree/master5 +# +# Where the merge moves the files master[123].t into the subdirectory +# files_subtree/ and master4 as well as files_subtree/master5 add files to that +# directory directly. +# +# Then, in subsequent test cases, `git filter-branch` is used to distill just +# the commits that touch files_subtree/. To give it a final pre-rebase touch, +# an empty commit is added on top. The pre-rebase commit history looks like +# this: +# +# Add subproject master - master4 - files_subtree/master5 - Empty commit +# +# where the root commit adds three files: master1.t, master2.t and master3.t. +# +# This commit history is then rebased onto `master3` with the +# `-Xsubtree=files_subtree` option in three different ways: +# +# 1. using `--preserve-merges` +# 2. using `--preserve-merges` and --keep-empty +# 3. without specifying a rebase backend + test_expect_success 'setup' ' test_commit README && - mkdir files && - ( - cd files && - git init && - test_commit master1 && - test_commit master2 && - test_commit master3 - ) && - git fetch files master && - git branch files-master FETCH_HEAD && - git read-tree --prefix=files_subtree files-master && - git checkout -- files_subtree && - tree=$(git write-tree) && - head=$(git rev-parse HEAD) && - rev=$(git rev-parse --verify files-master^0) && - commit=$(git commit-tree -p $head -p $rev -m "Add subproject master" $tree) && - git update-ref HEAD $commit && - ( - cd files_subtree && - test_commit master4 - ) && - test_commit files_subtree/master5 -' -# FAILURE: Does not preserve master4. -test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 4' ' - reset_rebase && - git checkout -b rebase-preserve-merges-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master4" + git init files && + test_commit -C files master1 && + test_commit -C files master2 && + test_commit -C files master3 && + + : perform subtree merge into files_subtree/ && + git fetch files refs/heads/master:refs/heads/files-master && + git merge -s ours --no-commit --allow-unrelated-histories \ + files-master && + git read-tree --prefix=files_subtree -u files-master && + git commit -m "Add subproject master" && + + : add two extra commits to rebase && + test_commit -C files_subtree master4 && + test_commit files_subtree/master5 && + + git checkout -b to-rebase && + git fast-export --no-data HEAD -- files_subtree/ | + sed -e "s%\([0-9a-f]\{40\} \)files_subtree/%\1%" | + git fast-import --force --quiet && + git reset --hard && + git commit -m "Empty commit" --allow-empty ' -# FAILURE: Does not preserve master5. -test_expect_failure 'Rebase -Xsubtree --preserve-merges --onto commit 5' ' +# FAILURE: Does not preserve master4. +test_expect_failure REBASE_P 'Rebase -Xsubtree --preserve-merges --onto commit' ' reset_rebase && - git checkout -b rebase-preserve-merges-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && + git checkout -b rebase-preserve-merges to-rebase && git rebase -Xsubtree=files_subtree --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~)" = "master4" && verbose test "$(commit_message HEAD)" = "files_subtree/master5" ' # FAILURE: Does not preserve master4. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 4' ' - reset_rebase && - git checkout -b rebase-keep-empty-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" -' - -# FAILURE: Does not preserve master5. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit 5' ' - reset_rebase && - git checkout -b rebase-keep-empty-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master5" -' - -# FAILURE: Does not preserve Empty. -test_expect_failure 'Rebase -Xsubtree --keep-empty --preserve-merges --onto empty commit' ' +test_expect_failure REBASE_P 'Rebase -Xsubtree --keep-empty --preserve-merges --onto commit' ' reset_rebase && - git checkout -b rebase-keep-empty-empty master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && + git checkout -b rebase-keep-empty to-rebase && git rebase -Xsubtree=files_subtree --keep-empty --preserve-merges --onto files-master master && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" ' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto commit 4' ' +test_expect_success 'Rebase -Xsubtree --empty=ask --onto commit' ' reset_rebase && - git checkout -b rebase-onto-4 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && - verbose test "$(commit_message HEAD~2)" = "files_subtree/master4" + git checkout -b rebase-onto to-rebase && + test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --onto files-master master && + : first pick results in no changes && + git rebase --skip && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && + verbose test "$(commit_message HEAD)" = "Empty commit" ' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto commit 5' ' - reset_rebase && - git checkout -b rebase-onto-5 master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && - verbose test "$(commit_message HEAD~)" = "files_subtree/master5" -' -# FAILURE: fatal: Could not parse object -test_expect_failure 'Rebase -Xsubtree --onto empty commit' ' +test_expect_success 'Rebase -Xsubtree --empty=ask --rebase-merges --onto commit' ' reset_rebase && - git checkout -b rebase-onto-empty master && - git filter-branch --prune-empty -f --subdirectory-filter files_subtree && - git commit -m "Empty commit" --allow-empty && - git rebase -Xsubtree=files_subtree --onto files-master master && + git checkout -b rebase-merges-onto to-rebase && + test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --rebase-merges --onto files-master --root && + : first pick results in no changes && + git rebase --skip && + verbose test "$(commit_message HEAD~2)" = "master4" && + verbose test "$(commit_message HEAD~)" = "files_subtree/master5" && verbose test "$(commit_message HEAD)" = "Empty commit" ' diff --git a/t/t3429-rebase-edit-todo.sh b/t/t3429-rebase-edit-todo.sh index b9292df..7024d49 100755 --- a/t/t3429-rebase-edit-todo.sh +++ b/t/t3429-rebase-edit-todo.sh @@ -3,12 +3,83 @@ test_description='rebase should reread the todo file if an exec modifies it' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + +test_expect_success 'setup' ' + test_commit first file && + test_commit second file && + test_commit third file +' test_expect_success 'rebase exec modifies rebase-todo' ' - test_commit initial && todo=.git/rebase-merge/git-rebase-todo && git rebase HEAD -x "echo exec touch F >>$todo" && test -e F ' +test_expect_success 'loose object cache vs re-reading todo list' ' + GIT_REBASE_TODO=.git/rebase-merge/git-rebase-todo && + export GIT_REBASE_TODO && + write_script append-todo.sh <<-\EOS && + # For values 5 and 6, this yields SHA-1s with the same first two digits + echo "pick $(git rev-parse --short \ + $(printf "%s\\n" \ + "tree $EMPTY_TREE" \ + "author A U Thor <author@example.org> $1 +0000" \ + "committer A U Thor <author@example.org> $1 +0000" \ + "" \ + "$1" | + git hash-object -t commit -w --stdin))" >>$GIT_REBASE_TODO + + shift + test -z "$*" || + echo "exec $0 $*" >>$GIT_REBASE_TODO + EOS + + git rebase HEAD -x "./append-todo.sh 5 6" +' + +test_expect_success 'todo is re-read after reword and squash' ' + write_script reword-editor.sh <<-\EOS && + GIT_SEQUENCE_EDITOR="echo \"exec echo $(cat file) >>actual\" >>" \ + git rebase --edit-todo + EOS + + test_write_lines first third >expected && + set_fake_editor && + GIT_SEQUENCE_EDITOR="$EDITOR" FAKE_LINES="reword 1 squash 2 fixup 3" \ + GIT_EDITOR=./reword-editor.sh git rebase -i --root third && + test_cmp expected actual +' + +test_expect_success 're-reading todo doesnt interfere with revert --edit' ' + git reset --hard third && + + git revert --edit third second && + + cat >expect <<-\EOF && + Revert "second" + Revert "third" + third + second + first + EOF + git log --format="%s" >actual && + test_cmp expect actual +' + +test_expect_success 're-reading todo doesnt interfere with cherry-pick --edit' ' + git reset --hard first && + + git cherry-pick --edit second third && + + cat >expect <<-\EOF && + third + second + first + EOF + git log --format="%s" >actual && + test_cmp expect actual +' + test_done diff --git a/t/t3430-rebase-merges.sh b/t/t3430-rebase-merges.sh index cc56468..a1bc3e2 100755 --- a/t/t3430-rebase-merges.sh +++ b/t/t3430-rebase-merges.sh @@ -20,12 +20,11 @@ Initial setup: ' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-rebase.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh test_cmp_graph () { cat >expect && - git log --graph --boundary --format=%s "$@" >output && - sed "s/ *$//" <output >output.trimmed && - test_cmp expect output.trimmed + lib_test_cmp_graph --boundary --format=%s "$@" } test_expect_success 'setup' ' @@ -37,20 +36,27 @@ test_expect_success 'setup' ' test_commit A && git checkout -b first && test_commit B && + b=$(git rev-parse --short HEAD) && git checkout master && test_commit C && + c=$(git rev-parse --short HEAD) && test_commit D && + d=$(git rev-parse --short HEAD) && git merge --no-commit B && test_tick && git commit -m E && git tag -m E E && + e=$(git rev-parse --short HEAD) && git checkout -b second C && test_commit F && + f=$(git rev-parse --short HEAD) && test_commit G && + g=$(git rev-parse --short HEAD) && git checkout master && git merge --no-commit G && test_tick && git commit -m H && + h=$(git rev-parse --short HEAD) && git tag -m H H && git checkout A && test_commit conflicting-G G.t @@ -93,24 +99,24 @@ test_expect_success 'create completely different structure' ' ' test_expect_success 'generate correct todo list' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && label onto reset onto - pick d9df450 B + pick $b B label E reset onto - pick 5dee784 C + pick $c C label branch-point - pick ca2c861 F - pick 088b00a G + pick $f F + pick $g G label H reset branch-point # C - pick 12bd07b D - merge -C 2051b56 E # E - merge -C 233d48a H # H + pick $d D + merge -C $e E # E + merge -C $h H # H EOF @@ -125,7 +131,7 @@ test_expect_success '`reset` refuses to overwrite untracked files' ' : >dont-overwrite-untracked.t && echo "reset refs/tags/dont-overwrite-untracked" >script-from-scratch && test_config sequence.editor \""$PWD"/replace-editor.sh\" && - test_must_fail git rebase -r HEAD && + test_must_fail git rebase -ir HEAD && git rebase --abort ' @@ -151,7 +157,6 @@ test_expect_success 'failed `merge -C` writes patch (may be rescheduled, too)' ' test_path_is_file .git/rebase-merge/patch ' -SQ="'" test_expect_success 'failed `merge <branch>` does not crash' ' test_when_finished "test_might_fail git rebase --abort" && git checkout conflicting-G && @@ -164,6 +169,19 @@ test_expect_success 'failed `merge <branch>` does not crash' ' grep "^Merge branch ${SQ}G${SQ}$" .git/rebase-merge/message ' +test_expect_success 'fast-forward merge -c still rewords' ' + git checkout -b fast-forward-merge-c H && + ( + set_fake_editor && + FAKE_COMMIT_MESSAGE=edited \ + GIT_SEQUENCE_EDITOR="echo merge -c H G >" \ + git rebase -ir @^ + ) && + echo edited >expected && + git log --pretty=format:%B -1 >actual && + test_cmp expected actual +' + test_expect_success 'with a branch tip that was cherry-picked already' ' git checkout -b already-upstream master && base="$(git rev-parse --verify HEAD)" && @@ -224,8 +242,24 @@ test_expect_success 'refs/rewritten/* is worktree-local' ' test_cmp_rev HEAD "$(cat wt/b)" ' +test_expect_success '--abort cleans up refs/rewritten' ' + git checkout -b abort-cleans-refs-rewritten H && + GIT_SEQUENCE_EDITOR="echo break >>" git rebase -ir @^ && + git rev-parse --verify refs/rewritten/onto && + git rebase --abort && + test_must_fail git rev-parse --verify refs/rewritten/onto +' + +test_expect_success '--quit cleans up refs/rewritten' ' + git checkout -b quit-cleans-refs-rewritten H && + GIT_SEQUENCE_EDITOR="echo break >>" git rebase -ir @^ && + git rev-parse --verify refs/rewritten/onto && + git rebase --quit && + test_must_fail git rev-parse --verify refs/rewritten/onto +' + test_expect_success 'post-rewrite hook and fixups work for merges' ' - git checkout -b post-rewrite && + git checkout -b post-rewrite H && test_commit same1 && git reset --hard HEAD^ && test_commit same2 && @@ -271,7 +305,7 @@ test_expect_success 'root commits' ' EOF test_config sequence.editor \""$PWD"/replace-editor.sh\" && test_tick && - git rebase -i --force --root -r && + git rebase -i --force-rebase --root -r && test "Parsnip" = "$(git show -s --format=%an HEAD^)" && test $(git rev-parse second-root^0) != $(git rev-parse HEAD^) && test $(git rev-parse second-root:second-root.t) = \ @@ -311,7 +345,7 @@ test_expect_success 'A root commit can be a cousin, treat it that way' ' git merge --allow-unrelated-histories khnum && test_tick && git rebase -f -r HEAD^ && - ! test_cmp_rev HEAD^2 khnum && + test_cmp_rev ! HEAD^2 khnum && test_cmp_graph HEAD^.. <<-\EOF && * Merge branch '\''khnum'\'' into asherah |\ @@ -364,7 +398,7 @@ test_expect_success 'octopus merges' ' test_cmp_rev HEAD $before && test_tick && - git rebase -i --force -r HEAD^^ && + git rebase -i --force-rebase -r HEAD^^ && test "Hank" = "$(git show -s --format=%an HEAD)" && test "$before" != $(git rev-parse HEAD) && test_cmp_graph HEAD^^.. <<-\EOF @@ -373,7 +407,7 @@ test_expect_success 'octopus merges' ' | | * three | * | two | |/ - * | one + * / one |/ o before-octopus EOF @@ -412,4 +446,52 @@ test_expect_success '--continue after resolving conflicts after a merge' ' test_path_is_missing .git/MERGE_HEAD ' +test_expect_success '--rebase-merges with strategies' ' + git checkout -b with-a-strategy F && + test_tick && + git merge -m "Merge conflicting-G" conflicting-G && + + : first, test with a merge strategy option && + git rebase -ir -Xtheirs G && + echo conflicting-G >expect && + test_cmp expect G.t && + + : now, try with a merge strategy other than recursive && + git reset --hard @{1} && + write_script git-merge-override <<-\EOF && + echo overridden$1 >>G.t + git add G.t + EOF + PATH="$PWD:$PATH" git rebase -ir -s override -Xxopt G && + test_write_lines G overridden--xopt >expect && + test_cmp expect G.t +' + +test_expect_success '--rebase-merges with commit that can generate bad characters for filename' ' + git checkout -b colon-in-label E && + git merge -m "colon: this should work" G && + git rebase --rebase-merges --force-rebase E +' + +test_expect_success '--rebase-merges with message matched with onto label' ' + git checkout -b onto-label E && + git merge -m onto G && + git rebase --rebase-merges --force-rebase E && + test_cmp_graph <<-\EOF + * onto + |\ + | * G + | * F + * | E + |\ \ + | * | B + * | | D + | |/ + |/| + * | C + |/ + * A + EOF +' + test_done diff --git a/t/t3431-rebase-fork-point.sh b/t/t3431-rebase-fork-point.sh new file mode 100755 index 0000000..78851b9 --- /dev/null +++ b/t/t3431-rebase-fork-point.sh @@ -0,0 +1,57 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='git rebase --fork-point test' + +. ./test-lib.sh + +# A---B---D---E (master) +# \ +# C*---F---G (side) +# +# C was formerly part of master but master was rewound to remove C +# +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + git branch -t side && + git reset --hard HEAD^ && + test_commit D && + test_commit E && + git checkout side && + test_commit F && + test_commit G +' + +test_rebase () { + expected="$1" && + shift && + test_expect_success "git rebase $*" " + git checkout master && + git reset --hard E && + git checkout side && + git reset --hard G && + git rebase $* && + test_write_lines $expected >expect && + git log --pretty=%s >actual && + test_cmp expect actual + " +} + +test_rebase 'G F E D B A' +test_rebase 'G F D B A' --onto D +test_rebase 'G F B A' --keep-base +test_rebase 'G F C E D B A' --no-fork-point +test_rebase 'G F C D B A' --no-fork-point --onto D +test_rebase 'G F C B A' --no-fork-point --keep-base +test_rebase 'G F E D B A' --fork-point refs/heads/master +test_rebase 'G F D B A' --fork-point --onto D refs/heads/master +test_rebase 'G F B A' --fork-point --keep-base refs/heads/master +test_rebase 'G F C E D B A' refs/heads/master +test_rebase 'G F C D B A' --onto D refs/heads/master +test_rebase 'G F C B A' --keep-base refs/heads/master + +test_done diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh new file mode 100755 index 0000000..6c9d4a1 --- /dev/null +++ b/t/t3432-rebase-fast-forward.sh @@ -0,0 +1,123 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='ensure rebase fast-forwards commits when possible' + +. ./test-lib.sh + +test_expect_success setup ' + test_commit A && + test_commit B && + test_commit C && + test_commit D && + git checkout -t -b side +' + +test_rebase_same_head () { + status_n="$1" && + shift && + what_n="$1" && + shift && + cmp_n="$1" && + shift && + status_f="$1" && + shift && + what_f="$1" && + shift && + cmp_f="$1" && + shift && + test_rebase_same_head_ $status_n $what_n $cmp_n " --apply" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f " --apply --no-ff" "$*" + test_rebase_same_head_ $status_n $what_n $cmp_n " --merge" "$*" && + test_rebase_same_head_ $status_f $what_f $cmp_f " --merge --no-ff" "$*" +} + +test_rebase_same_head_ () { + status="$1" && + shift && + what="$1" && + shift && + cmp="$1" && + shift && + flag="$1" + shift && + test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" " + oldhead=\$(git rev-parse HEAD) && + test_when_finished 'git reset --hard \$oldhead' && + cp .git/logs/HEAD expect && + git rebase$flag $* >stdout && + if test $what = work + then + old=\$(wc -l <expect) && + test_line_count '-gt' \$old .git/logs/HEAD + elif test $what = noop + then + test_cmp expect .git/logs/HEAD + fi && + newhead=\$(git rev-parse HEAD) && + if test $cmp = same + then + test_cmp_rev \$oldhead \$newhead + elif test $cmp = diff + then + test_cmp_rev ! \$oldhead \$newhead + fi + " +} + +changes='no changes' +test_rebase_same_head success noop same success work same +test_rebase_same_head success noop same success work same master +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B +test_rebase_same_head success noop same success work same --onto master... master +test_rebase_same_head success noop same success work same --keep-base master +test_rebase_same_head success noop same success work same --keep-base +test_rebase_same_head success noop same success work same --no-fork-point +test_rebase_same_head success noop same success work same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same --fork-point master +test_rebase_same_head success noop same success work diff --fork-point --onto B B +test_rebase_same_head success noop same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work same --fork-point --onto master... master +test_rebase_same_head success noop same success work same --keep-base --keep-base master + +test_expect_success 'add work same to side' ' + test_commit E +' + +changes='our changes' +test_rebase_same_head success noop same success work same +test_rebase_same_head success noop same success work same master +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B +test_rebase_same_head success noop same success work same --onto master... master +test_rebase_same_head success noop same success work same --keep-base master +test_rebase_same_head success noop same success work same --keep-base +test_rebase_same_head success noop same success work same --no-fork-point +test_rebase_same_head success noop same success work same --keep-base --no-fork-point +test_rebase_same_head success noop same success work same --fork-point master +test_rebase_same_head success noop same success work diff --fork-point --onto B B +test_rebase_same_head success noop same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work same --fork-point --onto master... master +test_rebase_same_head success noop same success work same --fork-point --keep-base master + +test_expect_success 'add work same to upstream' ' + git checkout master && + test_commit F && + git checkout side +' + +changes='our and their changes' +test_rebase_same_head success noop same success work diff --onto B B +test_rebase_same_head success noop same success work diff --onto B... B +test_rebase_same_head success noop same success work diff --onto master... master +test_rebase_same_head success noop same success work diff --keep-base master +test_rebase_same_head success noop same success work diff --keep-base +test_rebase_same_head failure work same success work diff --fork-point --onto B B +test_rebase_same_head failure work same success work diff --fork-point --onto B... B +test_rebase_same_head success noop same success work diff --fork-point --onto master... master +test_rebase_same_head success noop same success work diff --fork-point --keep-base master + +test_done diff --git a/t/t3433-rebase-across-mode-change.sh b/t/t3433-rebase-across-mode-change.sh new file mode 100755 index 0000000..05df964 --- /dev/null +++ b/t/t3433-rebase-across-mode-change.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +test_description='git rebase across mode change' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir DS && + >DS/whatever && + git add DS && + git commit -m base && + + git branch side1 && + git branch side2 && + + git checkout side1 && + git rm -rf DS && + test_ln_s_add unrelated DS && + git commit -m side1 && + + git checkout side2 && + >unrelated && + git add unrelated && + git commit -m commit1 && + + echo >>unrelated && + git commit -am commit2 +' + +test_expect_success 'rebase changes with the apply backend' ' + test_when_finished "git rebase --abort || true" && + git checkout -b apply-backend side2 && + git rebase side1 +' + +test_expect_success 'rebase changes with the merge backend' ' + test_when_finished "git rebase --abort || true" && + git checkout -b merge-backend side2 && + git rebase -m side1 +' + +test_expect_success 'rebase changes with the merge backend with a delay' ' + test_when_finished "git rebase --abort || true" && + git checkout -b merge-delay-backend side2 && + git rebase -m --exec "sleep 1" side1 +' + +test_done diff --git a/t/t3434-rebase-i18n.sh b/t/t3434-rebase-i18n.sh new file mode 100755 index 0000000..c7c835c --- /dev/null +++ b/t/t3434-rebase-i18n.sh @@ -0,0 +1,84 @@ +#!/bin/sh +# +# Copyright (c) 2019 Doan Tran Cong Danh +# + +test_description='rebase with changing encoding + +Initial setup: + +1 - 2 master + \ + 3 - 4 first + \ + 5 - 6 second +' + +. ./test-lib.sh + +compare_msg () { + iconv -f "$2" -t "$3" "$TEST_DIRECTORY/t3434/$1" >expect && + git cat-file commit HEAD >raw && + sed "1,/^$/d" raw >actual && + test_cmp expect actual +} + +test_expect_success setup ' + test_commit one && + git branch first && + test_commit two && + git switch first && + test_commit three && + git branch second && + test_commit four && + git switch second && + test_commit five && + test_commit six +' + +test_expect_success 'rebase --rebase-merges update encoding eucJP to UTF-8' ' + git switch -c merge-eucJP-UTF-8 first && + git config i18n.commitencoding eucJP && + git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second && + git config i18n.commitencoding UTF-8 && + git rebase --rebase-merges master && + compare_msg eucJP.txt eucJP UTF-8 +' + +test_expect_success 'rebase --rebase-merges update encoding eucJP to ISO-2022-JP' ' + git switch -c merge-eucJP-ISO-2022-JP first && + git config i18n.commitencoding eucJP && + git merge -F "$TEST_DIRECTORY/t3434/eucJP.txt" second && + git config i18n.commitencoding ISO-2022-JP && + git rebase --rebase-merges master && + compare_msg eucJP.txt eucJP ISO-2022-JP +' + +test_rebase_continue_update_encode () { + old=$1 + new=$2 + msgfile=$3 + test_expect_success "rebase --continue update from $old to $new" ' + (git rebase --abort || : abort current git-rebase failure) && + git switch -c conflict-$old-$new one && + echo for-conflict >two.t && + git add two.t && + git config i18n.commitencoding $old && + git commit -F "$TEST_DIRECTORY/t3434/$msgfile" && + git config i18n.commitencoding $new && + test_must_fail git rebase -m master && + test -f .git/rebase-merge/message && + git stripspace <.git/rebase-merge/message >two.t && + git add two.t && + git rebase --continue && + compare_msg $msgfile $old $new && + : git-commit assume invalid utf-8 is latin1 && + test_cmp expect two.t + ' +} + +test_rebase_continue_update_encode ISO-8859-1 UTF-8 ISO8859-1.txt +test_rebase_continue_update_encode eucJP UTF-8 eucJP.txt +test_rebase_continue_update_encode eucJP ISO-2022-JP eucJP.txt + +test_done diff --git a/t/t3434/ISO8859-1.txt b/t/t3434/ISO8859-1.txt new file mode 100644 index 0000000..7cbef0e --- /dev/null +++ b/t/t3434/ISO8859-1.txt @@ -0,0 +1,3 @@ +ÄËÑÏÖ + +Ábçdèfg diff --git a/t/t3434/eucJP.txt b/t/t3434/eucJP.txt new file mode 100644 index 0000000..546f2aa --- /dev/null +++ b/t/t3434/eucJP.txt @@ -0,0 +1,4 @@ +¤Ï¤ì¤Ò¤Û¤Õ + +¤·¤Æ¤¤¤ë¤Î¤¬¡¢¤¤¤ë¤Î¤Ç¡£ +ßÀÉͤۤì¤×¤ê¤Ý¤ì¤Þ¤Ó¤°¤ê¤í¤Ø¡£ diff --git a/t/t3501-revert-cherry-pick.sh b/t/t3501-revert-cherry-pick.sh index d1c68af..7c1da21 100755 --- a/t/t3501-revert-cherry-pick.sh +++ b/t/t3501-revert-cherry-pick.sh @@ -106,7 +106,7 @@ test_expect_success 'cherry-pick on unborn branch' ' rm -rf * && git cherry-pick initial && git diff --quiet initial && - ! test_cmp_rev initial HEAD + test_cmp_rev ! initial HEAD ' test_expect_success 'cherry-pick "-" to pick from previous branch' ' @@ -150,7 +150,7 @@ test_expect_success 'cherry-pick works with dirty renamed file' ' test_tick && git commit -m renamed && echo modified >renamed && - git cherry-pick refs/heads/unrelated >out && + git cherry-pick refs/heads/unrelated && test $(git rev-parse :0:renamed) = $(git rev-parse HEAD~2:to-rename.t) && grep -q "^modified$" renamed ' diff --git a/t/t3502-cherry-pick-merge.sh b/t/t3502-cherry-pick-merge.sh index b160271..8b635a1 100755 --- a/t/t3502-cherry-pick-merge.sh +++ b/t/t3502-cherry-pick-merge.sh @@ -40,12 +40,12 @@ test_expect_success 'cherry-pick -m complains of bogus numbers' ' test_expect_code 129 git cherry-pick -m 0 b ' -test_expect_success 'cherry-pick a non-merge with -m should fail' ' +test_expect_success 'cherry-pick explicit first parent of a non-merge' ' git reset --hard && git checkout a^0 && - test_expect_code 128 git cherry-pick -m 1 b && - git diff --exit-code a -- + git cherry-pick -m 1 b && + git diff --exit-code c -- ' @@ -84,12 +84,12 @@ test_expect_success 'cherry pick a merge relative to nonexistent parent should f ' -test_expect_success 'revert a non-merge with -m should fail' ' +test_expect_success 'revert explicit first parent of a non-merge' ' git reset --hard && git checkout c^0 && - test_must_fail git revert -m 1 b && - git diff --exit-code c + git revert -m 1 b && + git diff --exit-code a -- ' diff --git a/t/t3504-cherry-pick-rerere.sh b/t/t3504-cherry-pick-rerere.sh index a267b2d..80a0d08 100755 --- a/t/t3504-cherry-pick-rerere.sh +++ b/t/t3504-cherry-pick-rerere.sh @@ -94,8 +94,10 @@ test_expect_success 'cherry-pick --rerere-autoupdate more than once' ' test_expect_success 'cherry-pick conflict without rerere' ' test_config rerere.enabled false && - test_must_fail git cherry-pick master && - test_must_fail test_cmp expect foo + test_must_fail git cherry-pick foo-master && + grep ===== foo && + grep foo-dev foo && + grep foo-master foo ' test_done diff --git a/t/t3506-cherry-pick-ff.sh b/t/t3506-cherry-pick-ff.sh index fb889ac..9d5adbc 100755 --- a/t/t3506-cherry-pick-ff.sh +++ b/t/t3506-cherry-pick-ff.sh @@ -16,7 +16,11 @@ test_expect_success setup ' git add file1 && test_tick && git commit -m "second" && - git tag second + git tag second && + test_oid_cache <<-EOF + cp_ff sha1:1df192cd8bc58a2b275d842cede4d221ad9000d1 + cp_ff sha256:e70d6b7fc064bddb516b8d512c9057094b96ce6ff08e12080acc4fe7f1d60a1d + EOF ' test_expect_success 'cherry-pick using --ff fast forwards' ' @@ -64,10 +68,10 @@ test_expect_success 'merge setup' ' git checkout -b new A ' -test_expect_success 'cherry-pick a non-merge with --ff and -m should fail' ' +test_expect_success 'cherry-pick explicit first parent of a non-merge with --ff' ' git reset --hard A -- && - test_must_fail git cherry-pick --ff -m 1 B && - git diff --exit-code A -- + git cherry-pick --ff -m 1 B && + git diff --exit-code C -- ' test_expect_success 'cherry pick a merge with --ff but without -m should fail' ' @@ -102,7 +106,7 @@ test_expect_success 'cherry pick a root commit with --ff' ' git add file2 && git commit --amend -m "file2" && git cherry-pick --ff first && - test "$(git rev-parse --verify HEAD)" = "1df192cd8bc58a2b275d842cede4d221ad9000d1" + test "$(git rev-parse --verify HEAD)" = "$(test_oid cp_ff)" ' test_expect_success 'cherry-pick --ff on unborn branch' ' diff --git a/t/t3507-cherry-pick-conflict.sh b/t/t3507-cherry-pick-conflict.sh index 0db1661..9bd482c 100755 --- a/t/t3507-cherry-pick-conflict.sh +++ b/t/t3507-cherry-pick-conflict.sh @@ -25,6 +25,11 @@ test_expect_success setup ' test_commit base foo b && test_commit picked foo c && test_commit --signoff picked-signed foo d && + git checkout -b topic initial && + test_commit redundant-pick foo c redundant && + git commit --allow-empty --allow-empty-message && + git tag empty && + git checkout master && git config advice.detachedhead false ' @@ -88,7 +93,7 @@ test_expect_success 'cherry-pick --no-commit does not set CHERRY_PICK_HEAD' ' test_expect_success 'cherry-pick w/dirty tree does not set CHERRY_PICK_HEAD' ' pristine_detach initial && - echo foo > foo && + echo foo >foo && test_must_fail git cherry-pick base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' @@ -96,7 +101,7 @@ test_expect_success 'cherry-pick w/dirty tree does not set CHERRY_PICK_HEAD' ' test_expect_success \ 'cherry-pick --strategy=resolve w/dirty tree does not set CHERRY_PICK_HEAD' ' pristine_detach initial && - echo foo > foo && + echo foo >foo && test_must_fail git cherry-pick --strategy=resolve base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' @@ -156,6 +161,25 @@ test_expect_success 'successful commit clears CHERRY_PICK_HEAD' ' test_must_fail git rev-parse --verify CHERRY_PICK_HEAD ' +test_expect_success 'successful final commit clears cherry-pick state' ' + pristine_detach initial && + + test_must_fail git cherry-pick base picked-signed && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git commit -a && + test_path_is_missing .git/sequencer +' + +test_expect_success 'reset after final pick clears cherry-pick state' ' + pristine_detach initial && + + test_must_fail git cherry-pick base picked-signed && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git reset && + test_path_is_missing .git/sequencer +' test_expect_success 'failed cherry-pick produces dirty index' ' pristine_detach initial && @@ -175,23 +199,63 @@ test_expect_success 'failed cherry-pick registers participants in index' ' git ls-files --stage foo && git checkout picked -- foo && git ls-files --stage foo - } > stages && + } >stages && sed " 1 s/ 0 / 1 / 2 s/ 0 / 2 / 3 s/ 0 / 3 / - " < stages > expected && + " stages >expected && git read-tree -u --reset HEAD && test_must_fail git cherry-pick picked && - git ls-files --stage --unmerged > actual && + git ls-files --stage --unmerged >actual && test_cmp expected actual ' +test_expect_success \ + 'cherry-pick conflict, ensure commit.cleanup = scissors places scissors line properly' ' + pristine_detach initial && + git config commit.cleanup scissors && + cat <<-EOF >expected && + picked + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git cherry-pick picked && + + test_i18ncmp expected .git/MERGE_MSG +' + +test_expect_success \ + 'cherry-pick conflict, ensure cleanup=scissors places scissors line properly' ' + pristine_detach initial && + git config --unset commit.cleanup && + cat <<-EOF >expected && + picked + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git cherry-pick --cleanup=scissors picked && + + test_i18ncmp expected .git/MERGE_MSG +' + test_expect_success 'failed cherry-pick describes conflict in work tree' ' pristine_detach initial && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ======= @@ -201,14 +265,14 @@ test_expect_success 'failed cherry-pick describes conflict in work tree' ' test_must_fail git cherry-pick picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' test_expect_success 'diff3 -m style' ' pristine_detach initial && git config merge.conflictstyle diff3 && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ||||||| parent of objid picked @@ -220,14 +284,14 @@ test_expect_success 'diff3 -m style' ' test_must_fail git cherry-pick picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' test_expect_success 'revert also handles conflicts sanely' ' git config --unset merge.conflictstyle && pristine_detach initial && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ======= @@ -241,24 +305,24 @@ test_expect_success 'revert also handles conflicts sanely' ' git ls-files --stage foo && git checkout base -- foo && git ls-files --stage foo - } > stages && + } >stages && sed " 1 s/ 0 / 1 / 2 s/ 0 / 2 / 3 s/ 0 / 3 / - " < stages > expected-stages && + " stages >expected-stages && git read-tree -u --reset HEAD && head=$(git rev-parse HEAD) && test_must_fail git revert picked && newhead=$(git rev-parse HEAD) && - git ls-files --stage --unmerged > actual-stages && + git ls-files --stage --unmerged >actual-stages && test "$head" = "$newhead" && test_must_fail git update-index --refresh -q && test_must_fail git diff-index --exit-code HEAD && test_cmp expected-stages actual-stages && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' @@ -284,7 +348,7 @@ test_expect_success 'revert --no-commit sets REVERT_HEAD' ' test_expect_success 'revert w/dirty tree does not set REVERT_HEAD' ' pristine_detach base && - echo foo > foo && + echo foo >foo && test_must_fail git revert base && test_must_fail git rev-parse --verify CHERRY_PICK_HEAD && test_must_fail git rev-parse --verify REVERT_HEAD @@ -316,10 +380,30 @@ test_expect_success 'failed commit does not clear REVERT_HEAD' ' test_cmp_rev picked REVERT_HEAD ' +test_expect_success 'successful final commit clears revert state' ' + pristine_detach picked-signed && + + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git commit -a && + test_path_is_missing .git/sequencer +' + +test_expect_success 'reset after final pick clears revert state' ' + pristine_detach picked-signed && + + test_must_fail git revert picked-signed base && + echo resolved >foo && + test_path_is_file .git/sequencer/todo && + git reset && + test_path_is_missing .git/sequencer +' + test_expect_success 'revert conflict, diff3 -m style' ' pristine_detach initial && git config merge.conflictstyle diff3 && - cat <<-EOF > expected && + cat <<-EOF >expected && <<<<<<< HEAD a ||||||| objid picked @@ -331,10 +415,56 @@ test_expect_success 'revert conflict, diff3 -m style' ' test_must_fail git revert picked && - sed "s/[a-f0-9]*\.\.\./objid/" foo > actual && + sed "s/[a-f0-9]*\.\.\./objid/" foo >actual && test_cmp expected actual ' +test_expect_success \ + 'revert conflict, ensure commit.cleanup = scissors places scissors line properly' ' + pristine_detach initial && + git config commit.cleanup scissors && + cat >expected <<-EOF && + Revert "picked" + + This reverts commit OBJID. + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git revert picked && + + sed "s/$OID_REGEX/OBJID/" .git/MERGE_MSG >actual && + test_i18ncmp expected actual +' + +test_expect_success \ + 'revert conflict, ensure cleanup=scissors places scissors line properly' ' + pristine_detach initial && + git config --unset commit.cleanup && + cat >expected <<-EOF && + Revert "picked" + + This reverts commit OBJID. + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # foo + EOF + + test_must_fail git revert --cleanup=scissors picked && + + sed "s/$OID_REGEX/OBJID/" .git/MERGE_MSG >actual && + test_i18ncmp expected actual +' + test_expect_success 'failed cherry-pick does not forget -s' ' pristine_detach initial && test_must_fail git cherry-pick -s picked && @@ -345,7 +475,7 @@ test_expect_success 'commit after failed cherry-pick does not add duplicated -s' pristine_detach initial && test_must_fail git cherry-pick -s picked-signed && git commit -a -s && - test $(git show -s |grep -c "Signed-off-by") = 1 + test $(git show -s >tmp && grep -c "Signed-off-by" tmp && rm tmp) = 1 ' test_expect_success 'commit after failed cherry-pick adds -s at the right place' ' @@ -359,7 +489,7 @@ test_expect_success 'commit after failed cherry-pick adds -s at the right place' Signed-off-by: C O Mitter <committer@example.com> # Conflicts: EOF - grep -e "^# Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + grep -e "^# Conflicts:" -e '^Signed-off-by' .git/COMMIT_EDITMSG >actual && test_cmp expect actual && cat <<-\EOF >expected && @@ -378,7 +508,7 @@ test_expect_success 'commit --amend -s places the sign-off at the right place' ' # emulate old-style conflicts block mv .git/MERGE_MSG .git/MERGE_MSG+ && - sed -e "/^# Conflicts:/,\$s/^# *//" <.git/MERGE_MSG+ >.git/MERGE_MSG && + sed -e "/^# Conflicts:/,\$s/^# *//" .git/MERGE_MSG+ >.git/MERGE_MSG && git commit -a && git commit --amend -s && @@ -388,7 +518,7 @@ test_expect_success 'commit --amend -s places the sign-off at the right place' ' Signed-off-by: C O Mitter <committer@example.com> Conflicts: EOF - grep -e "^Conflicts:" -e '^Signed-off-by' <.git/COMMIT_EDITMSG >actual && + grep -e "^Conflicts:" -e '^Signed-off-by' .git/COMMIT_EDITMSG >actual && test_cmp expect actual ' @@ -405,4 +535,23 @@ test_expect_success 'cherry-pick preserves sparse-checkout' ' test_i18ngrep ! "Changes not staged for commit:" actual ' +test_expect_success 'cherry-pick --continue remembers --keep-redundant-commits' ' + test_when_finished "git cherry-pick --abort || :" && + pristine_detach initial && + test_must_fail git cherry-pick --keep-redundant-commits picked redundant && + echo c >foo && + git add foo && + git cherry-pick --continue +' + +test_expect_success 'cherry-pick --continue remembers --allow-empty and --allow-empty-message' ' + test_when_finished "git cherry-pick --abort || :" && + pristine_detach initial && + test_must_fail git cherry-pick --allow-empty --allow-empty-message \ + picked empty && + echo c >foo && + git add foo && + git cherry-pick --continue +' + test_done diff --git a/t/t3508-cherry-pick-many-commits.sh b/t/t3508-cherry-pick-many-commits.sh index b457333..23070a7 100755 --- a/t/t3508-cherry-pick-many-commits.sh +++ b/t/t3508-cherry-pick-many-commits.sh @@ -5,7 +5,7 @@ test_description='test cherry-picking many commits' . ./test-lib.sh check_head_differs_from() { - ! test_cmp_rev HEAD "$1" + test_cmp_rev ! HEAD "$1" } check_head_equals() { diff --git a/t/t3510-cherry-pick-sequence.sh b/t/t3510-cherry-pick-sequence.sh index c84eeef..793bcc7 100755 --- a/t/t3510-cherry-pick-sequence.sh +++ b/t/t3510-cherry-pick-sequence.sh @@ -61,7 +61,11 @@ test_expect_success 'cherry-pick mid-cherry-pick-sequence' ' test_expect_success 'cherry-pick persists opts correctly' ' pristine_detach initial && - test_expect_code 128 git cherry-pick -s -m 1 --strategy=recursive -X patience -X ours initial..anotherpick && + # to make sure that the session to cherry-pick a sequence + # gets interrupted, use a high-enough number that is larger + # than the number of parents of any commit we have created + mainline=4 && + test_expect_code 128 git cherry-pick -s -m $mainline --strategy=recursive -X patience -X ours initial..anotherpick && test_path_is_dir .git/sequencer && test_path_is_file .git/sequencer/head && test_path_is_file .git/sequencer/todo && @@ -69,7 +73,7 @@ test_expect_success 'cherry-pick persists opts correctly' ' echo "true" >expect && git config --file=.git/sequencer/opts --get-all options.signoff >actual && test_cmp expect actual && - echo "1" >expect && + echo "$mainline" >expect && git config --file=.git/sequencer/opts --get-all options.mainline >actual && test_cmp expect actual && echo "recursive" >expect && @@ -89,6 +93,128 @@ test_expect_success 'cherry-pick cleans up sequencer state upon success' ' test_path_is_missing .git/sequencer ' +test_expect_success 'cherry-pick --skip requires cherry-pick in progress' ' + pristine_detach initial && + test_must_fail git cherry-pick --skip +' + +test_expect_success 'revert --skip requires revert in progress' ' + pristine_detach initial && + test_must_fail git revert --skip +' + +test_expect_success 'cherry-pick --skip to skip commit' ' + pristine_detach initial && + test_must_fail git cherry-pick anotherpick && + test_must_fail git revert --skip && + git cherry-pick --skip && + test_cmp_rev initial HEAD && + test_path_is_missing .git/CHERRY_PICK_HEAD +' + +test_expect_success 'revert --skip to skip commit' ' + pristine_detach anotherpick && + test_must_fail git revert anotherpick~1 && + test_must_fail git cherry-pick --skip && + git revert --skip && + test_cmp_rev anotherpick HEAD +' + +test_expect_success 'skip "empty" commit' ' + pristine_detach picked && + test_commit dummy foo d && + test_must_fail git cherry-pick anotherpick && + git cherry-pick --skip && + test_cmp_rev dummy HEAD +' + +test_expect_success 'skip a commit and check if rest of sequence is correct' ' + pristine_detach initial && + echo e >expect && + cat >expect.log <<-EOF && + OBJID + :100644 100644 OBJID OBJID M foo + OBJID + :100644 100644 OBJID OBJID M foo + OBJID + :100644 100644 OBJID OBJID M unrelated + OBJID + :000000 100644 OBJID OBJID A foo + :000000 100644 OBJID OBJID A unrelated + EOF + test_must_fail git cherry-pick base..yetanotherpick && + test_must_fail git cherry-pick --skip && + echo d >foo && + git add foo && + git cherry-pick --continue && + { + git rev-list HEAD | + git diff-tree --root --stdin | + sed "s/$OID_REGEX/OBJID/g" + } >actual.log && + test_cmp expect foo && + test_cmp expect.log actual.log +' + +test_expect_success 'check advice when we move HEAD by committing' ' + pristine_detach initial && + cat >expect <<-EOF && + error: there is nothing to skip + hint: have you committed already? + hint: try "git cherry-pick --continue" + fatal: cherry-pick failed + EOF + test_must_fail git cherry-pick base..yetanotherpick && + echo c >foo && + git commit -a && + test_path_is_missing .git/CHERRY_PICK_HEAD && + test_must_fail git cherry-pick --skip 2>advice && + test_i18ncmp expect advice +' + +test_expect_success 'selectively advise --skip while launching another sequence' ' + pristine_detach initial && + cat >expect <<-EOF && + error: cherry-pick is already in progress + hint: try "git cherry-pick (--continue | --skip | --abort | --quit)" + fatal: cherry-pick failed + EOF + test_must_fail git cherry-pick picked..yetanotherpick && + test_must_fail git cherry-pick picked..yetanotherpick 2>advice && + test_i18ncmp expect advice && + cat >expect <<-EOF && + error: cherry-pick is already in progress + hint: try "git cherry-pick (--continue | --abort | --quit)" + fatal: cherry-pick failed + EOF + git reset --merge && + test_must_fail git cherry-pick picked..yetanotherpick 2>advice && + test_i18ncmp expect advice +' + +test_expect_success 'allow skipping commit but not abort for a new history' ' + pristine_detach initial && + cat >expect <<-EOF && + error: cannot abort from a branch yet to be born + fatal: cherry-pick failed + EOF + git checkout --orphan new_disconnected && + git reset --hard && + test_must_fail git cherry-pick anotherpick && + test_must_fail git cherry-pick --abort 2>advice && + git cherry-pick --skip && + test_i18ncmp expect advice +' + +test_expect_success 'allow skipping stopped cherry-pick because of untracked file modifications' ' + pristine_detach initial && + git rm --cached unrelated && + git commit -m "untrack unrelated" && + test_must_fail git cherry-pick initial base && + test_path_is_missing .git/CHERRY_PICK_HEAD && + git cherry-pick --skip +' + test_expect_success '--quit does not complain when no cherry-pick is in progress' ' pristine_detach initial && git cherry-pick --quit diff --git a/t/t3511-cherry-pick-x.sh b/t/t3511-cherry-pick-x.sh index 9888bf3..84a587d 100755 --- a/t/t3511-cherry-pick-x.sh +++ b/t/t3511-cherry-pick-x.sh @@ -298,4 +298,24 @@ test_expect_success 'cherry-pick preserves commit message' ' test_cmp expect actual ' +test_expect_success 'cherry-pick -x cleans commit message' ' + pristine_detach initial && + git cherry-pick -x mesg-unclean && + git log -1 --pretty=format:%B >actual && + printf "%s\n(cherry picked from commit %s)\n" \ + "$mesg_unclean" $(git rev-parse mesg-unclean) | + git stripspace >expect && + test_cmp expect actual +' + +test_expect_success 'cherry-pick -x respects commit.cleanup' ' + pristine_detach initial && + git -c commit.cleanup=strip cherry-pick -x mesg-unclean && + git log -1 --pretty=format:%B >actual && + printf "%s\n(cherry picked from commit %s)\n" \ + "$mesg_unclean" $(git rev-parse mesg-unclean) | + git stripspace -s >expect && + test_cmp expect actual +' + test_done diff --git a/t/t3600-rm.sh b/t/t3600-rm.sh index 04e5d42..f2c0168 100755 --- a/t/t3600-rm.sh +++ b/t/t3600-rm.sh @@ -8,91 +8,92 @@ test_description='Test of the various options to git rm.' . ./test-lib.sh # Setup some files to be removed, some with funny characters -test_expect_success \ - 'Initialize test directory' \ - "touch -- foo bar baz 'space embedded' -q && - git add -- foo bar baz 'space embedded' -q && - git commit -m 'add normal files'" +test_expect_success 'Initialize test directory' ' + touch -- foo bar baz "space embedded" -q && + git add -- foo bar baz "space embedded" -q && + git commit -m "add normal files" +' -if test_have_prereq !FUNNYNAMES; then +if test_have_prereq !FUNNYNAMES +then say 'Your filesystem does not allow tabs in filenames.' fi -test_expect_success FUNNYNAMES 'add files with funny names' " - touch -- 'tab embedded' 'newline -embedded' && - git add -- 'tab embedded' 'newline -embedded' && - git commit -m 'add files with tabs and newlines' -" - -test_expect_success \ - 'Pre-check that foo exists and is in index before git rm foo' \ - '[ -f foo ] && git ls-files --error-unmatch foo' - -test_expect_success \ - 'Test that git rm foo succeeds' \ - 'git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content >foo && - git add foo && - git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo succeeds if the index matches the file' \ - 'echo content >foo && - git add foo && - git commit -m foo && - echo "other content" >foo && - git rm --cached foo' - -test_expect_success \ - 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' - echo content >foo && - git add foo && - git commit -m foo --allow-empty && - echo "other content" >foo && - git add foo && - echo "yet another content" >foo && - test_must_fail git rm --cached foo -' - -test_expect_success \ - 'Test that git rm --cached -f foo works in case where --cached only did not' \ - 'echo content >foo && - git add foo && - git commit -m foo --allow-empty && - echo "other content" >foo && - git add foo && - echo "yet another content" >foo && - git rm --cached -f foo' - -test_expect_success \ - 'Post-check that foo exists but is not in index after git rm foo' \ - '[ -f foo ] && test_must_fail git ls-files --error-unmatch foo' - -test_expect_success \ - 'Pre-check that bar exists and is in index before "git rm bar"' \ - '[ -f bar ] && git ls-files --error-unmatch bar' - -test_expect_success \ - 'Test that "git rm bar" succeeds' \ - 'git rm bar' - -test_expect_success \ - 'Post-check that bar does not exist and is not in index after "git rm -f bar"' \ - '! [ -f bar ] && test_must_fail git ls-files --error-unmatch bar' - -test_expect_success \ - 'Test that "git rm -- -q" succeeds (remove a file that looks like an option)' \ - 'git rm -- -q' - -test_expect_success FUNNYNAMES \ - "Test that \"git rm -f\" succeeds with embedded space, tab, or newline characters." \ - "git rm -f 'space embedded' 'tab embedded' 'newline -embedded'" +test_expect_success FUNNYNAMES 'add files with funny names' ' + touch -- "tab embedded" "newline${LF}embedded" && + git add -- "tab embedded" "newline${LF}embedded" && + git commit -m "add files with tabs and newlines" +' + +test_expect_success 'Pre-check that foo exists and is in index before git rm foo' ' + test_path_is_file foo && + git ls-files --error-unmatch foo +' + +test_expect_success 'Test that git rm foo succeeds' ' + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo succeeds if the index matches the file' ' + echo content >foo && + git add foo && + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo succeeds if the index matches the file' ' + echo content >foo && + git add foo && + git commit -m foo && + echo "other content" >foo && + git rm --cached foo +' + +test_expect_success 'Test that git rm --cached foo fails if the index matches neither the file nor HEAD' ' + echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && + test_must_fail git rm --cached foo +' + +test_expect_success 'Test that git rm --cached -f foo works in case where --cached only did not' ' + echo content >foo && + git add foo && + git commit -m foo --allow-empty && + echo "other content" >foo && + git add foo && + echo "yet another content" >foo && + git rm --cached -f foo +' + +test_expect_success 'Post-check that foo exists but is not in index after git rm foo' ' + test_path_is_file foo && + test_must_fail git ls-files --error-unmatch foo +' + +test_expect_success 'Pre-check that bar exists and is in index before "git rm bar"' ' + test_path_is_file bar && + git ls-files --error-unmatch bar +' + +test_expect_success 'Test that "git rm bar" succeeds' ' + git rm bar +' + +test_expect_success 'Post-check that bar does not exist and is not in index after "git rm -f bar"' ' + test_path_is_missing bar && + test_must_fail git ls-files --error-unmatch bar +' + +test_expect_success 'Test that "git rm -- -q" succeeds (remove a file that looks like an option)' ' + git rm -- -q +' + +test_expect_success FUNNYNAMES 'Test that "git rm -f" succeeds with embedded space, tab, or newline characters.' ' + git rm -f "space embedded" "tab embedded" "newline${LF}embedded" +' test_expect_success SANITY 'Test that "git rm -f" fails if its rm fails' ' test_when_finished "chmod 775 ." && @@ -100,9 +101,9 @@ test_expect_success SANITY 'Test that "git rm -f" fails if its rm fails' ' test_must_fail git rm -f baz ' -test_expect_success \ - 'When the rm in "git rm -f" fails, it should not remove the file from the index' \ - 'git ls-files --error-unmatch baz' +test_expect_success 'When the rm in "git rm -f" fails, it should not remove the file from the index' ' + git ls-files --error-unmatch baz +' test_expect_success 'Remove nonexistent file with --ignore-unmatch' ' git rm --ignore-unmatch nonexistent @@ -112,9 +113,10 @@ test_expect_success '"rm" command printed' ' echo frotz >test-file && git add test-file && git commit -m "add file for rm test" && - git rm test-file >rm-output && - test $(grep "^rm " rm-output | wc -l) = 1 && - rm -f test-file rm-output && + git rm test-file >rm-output.raw && + grep "^rm " rm-output.raw >rm-output && + test_line_count = 1 rm-output && + rm -f test-file rm-output.raw rm-output && git commit -m "remove file from rm test" ' @@ -137,15 +139,15 @@ test_expect_success 'Re-add foo and baz' ' test_expect_success 'Modify foo -- rm should refuse' ' echo >>foo && test_must_fail git rm foo baz && - test -f foo && - test -f baz && + test_path_is_file foo && + test_path_is_file baz && git ls-files --error-unmatch foo baz ' test_expect_success 'Modified foo -- rm -f should work' ' git rm -f foo baz && - test ! -f foo && - test ! -f baz && + test_path_is_missing foo && + test_path_is_missing baz && test_must_fail git ls-files --error-unmatch foo && test_must_fail git ls-files --error-unmatch bar ' @@ -159,15 +161,15 @@ test_expect_success 'Re-add foo and baz for HEAD tests' ' test_expect_success 'foo is different in index from HEAD -- rm should refuse' ' test_must_fail git rm foo baz && - test -f foo && - test -f baz && + test_path_is_file foo && + test_path_is_file baz && git ls-files --error-unmatch foo baz ' test_expect_success 'but with -f it should work.' ' git rm -f foo baz && - test ! -f foo && - test ! -f baz && + test_path_is_missing foo && + test_path_is_missing baz && test_must_fail git ls-files --error-unmatch foo && test_must_fail git ls-files --error-unmatch baz ' @@ -194,21 +196,21 @@ test_expect_success 'Recursive test setup' ' test_expect_success 'Recursive without -r fails' ' test_must_fail git rm frotz && - test -d frotz && - test -f frotz/nitfol + test_path_is_dir frotz && + test_path_is_file frotz/nitfol ' test_expect_success 'Recursive with -r but dirty' ' echo qfwfq >>frotz/nitfol && test_must_fail git rm -r frotz && - test -d frotz && - test -f frotz/nitfol + test_path_is_dir frotz && + test_path_is_file frotz/nitfol ' test_expect_success 'Recursive with -r -f' ' git rm -f -r frotz && - ! test -f frotz/nitfol && - ! test -d frotz + test_path_is_missing frotz/nitfol && + test_path_is_missing frotz ' test_expect_success 'Remove nonexistent file returns nonzero exit status' ' @@ -217,44 +219,62 @@ test_expect_success 'Remove nonexistent file returns nonzero exit status' ' test_expect_success 'Call "rm" from outside the work tree' ' mkdir repo && - (cd repo && - git init && - echo something >somefile && - git add somefile && - git commit -m "add a file" && - (cd .. && - git --git-dir=repo/.git --work-tree=repo rm somefile) && - test_must_fail git ls-files --error-unmatch somefile) + ( + cd repo && + git init && + echo something >somefile && + git add somefile && + git commit -m "add a file" && + ( + cd .. && + git --git-dir=repo/.git --work-tree=repo rm somefile + ) && + test_must_fail git ls-files --error-unmatch somefile + ) ' test_expect_success 'refresh index before checking if it is up-to-date' ' - git reset --hard && test-tool chmtime -86400 frotz/nitfol && git rm frotz/nitfol && - test ! -f frotz/nitfol - + test_path_is_missing frotz/nitfol ' test_expect_success 'choking "git rm" should not let it die with cruft' ' + test_oid_init && git reset -q --hard && test_when_finished "rm -f .git/index.lock && git reset -q --hard" && i=0 && + hash=$(test_oid deadbeef) && while test $i -lt 12000 do - echo "100644 1234567890123456789012345678901234567890 0 some-file-$i" - i=$(( $i + 1 )) + echo "100644 $hash 0 some-file-$i" + i=$(( $i + 1 )) done | git update-index --index-info && + # git command is intentionally placed upstream of pipe to induce SIGPIPE git rm -n "some-file-*" | : && test_path_is_missing .git/index.lock ' +test_expect_success 'Resolving by removal is not a warning-worthy event' ' + git reset -q --hard && + test_when_finished "rm -f .git/index.lock msg && git reset -q --hard" && + blob=$(echo blob | git hash-object -w --stdin) && + for stage in 1 2 3 + do + echo "100644 $blob $stage blob" + done | git update-index --index-info && + git rm blob >msg 2>&1 && + test_i18ngrep ! "needs merge" msg && + test_must_fail git ls-files -s --error-unmatch blob +' + test_expect_success 'rm removes subdirectories recursively' ' mkdir -p dir/subdir/subsubdir && echo content >dir/subdir/subsubdir/file && git add dir/subdir/subsubdir/file && git rm -f dir/subdir/subsubdir/file && - ! test -d dir + test_path_is_missing dir ' cat >expect <<EOF @@ -285,14 +305,15 @@ EOF test_expect_success 'rm removes empty submodules from work tree' ' mkdir submod && - git update-index --add --cacheinfo 160000 $(git rev-parse HEAD) submod && + hash=$(git rev-parse HEAD) && + git update-index --add --cacheinfo 160000 "$hash" submod && git config -f .gitmodules submodule.sub.url ./. && git config -f .gitmodules submodule.sub.path submod && git submodule init && git add .gitmodules && git commit -m "add submodule" && git rm submod && - test ! -e submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -314,7 +335,7 @@ test_expect_success 'rm removes work tree of unmodified submodules' ' git reset --hard && git submodule update && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -325,7 +346,7 @@ test_expect_success 'rm removes a submodule with a trailing /' ' git reset --hard && git submodule update && git rm submod/ && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -343,12 +364,12 @@ test_expect_success 'rm of a populated submodule with different HEAD fails unles git submodule update && git -C submod checkout HEAD^ && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -359,8 +380,8 @@ test_expect_success 'rm --cached leaves work tree of populated submodules and .g git reset --hard && git submodule update && git rm --cached submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno >actual && test_cmp expect.cached actual && git config -f .gitmodules submodule.sub.url && @@ -371,7 +392,7 @@ test_expect_success 'rm --dry-run does not touch the submodule or .gitmodules' ' git reset --hard && git submodule update && git rm -n submod && - test -f submod/.git && + test_path_is_file submod/.git && git diff-index --exit-code HEAD ' @@ -381,8 +402,8 @@ test_expect_success 'rm does not complain when no .gitmodules file is found' ' git rm .gitmodules && git rm submod >actual 2>actual.err && test_must_be_empty actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect.both_deleted actual ' @@ -392,18 +413,25 @@ test_expect_success 'rm will error out on a modified .gitmodules file unless sta git submodule update && git config -f .gitmodules foo.bar true && test_must_fail git rm submod >actual 2>actual.err && - test -s actual.err && - test -d submod && - test -f submod/.git && + test_file_not_empty actual.err && + test_path_is_dir submod && + test_path_is_file submod/.git && git diff-files --quiet -- submod && git add .gitmodules && git rm submod >actual 2>actual.err && test_must_be_empty actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect actual ' +test_expect_success 'rm will not error out on .gitmodules file with zero stat data' ' + git reset --hard && + git submodule update && + git read-tree HEAD && + git rm submod && + test_path_is_missing submod +' test_expect_success 'rm issues a warning when section is not found in .gitmodules' ' git reset --hard && @@ -413,8 +441,8 @@ test_expect_success 'rm issues a warning when section is not found in .gitmodule echo "warning: Could not find section in .gitmodules where path=submod" >expect.err && git rm submod >actual 2>actual.err && test_i18ncmp expect.err actual.err && - ! test -d submod && - ! test -f submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno >actual && test_cmp expect actual ' @@ -424,12 +452,12 @@ test_expect_success 'rm of a populated submodule with modifications fails unless git submodule update && echo X >submod/empty && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -439,12 +467,12 @@ test_expect_success 'rm of a populated submodule with untracked files fails unle git submodule update && echo X >submod/untracked && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_untracked actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -481,7 +509,7 @@ test_expect_success 'rm removes work tree of unmodified conflicted submodule' ' git submodule update && test_must_fail git merge conflict2 && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -493,12 +521,12 @@ test_expect_success 'rm of a conflicted populated submodule with different HEAD git -C submod checkout HEAD^ && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -512,12 +540,12 @@ test_expect_success 'rm of a conflicted populated submodule with modifications f echo X >submod/empty && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual && test_must_fail git config -f .gitmodules submodule.sub.url && @@ -531,12 +559,12 @@ test_expect_success 'rm of a conflicted populated submodule with untracked files echo X >submod/untracked && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -545,20 +573,21 @@ test_expect_success 'rm of a conflicted populated submodule with a .git director git checkout conflict1 && git reset --hard && git submodule update && - (cd submod && + ( + cd submod && rm .git && cp -R ../.git/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree ) && test_must_fail git merge conflict2 && test_must_fail git rm submod && - test -d submod && - test -d submod/.git && + test_path_is_dir submod && + test_path_is_dir submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && test_must_fail git rm -f submod && - test -d submod && - test -d submod/.git && + test_path_is_dir submod && + test_path_is_dir submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.conflict actual && git merge --abort && @@ -570,7 +599,7 @@ test_expect_success 'rm of a conflicted unpopulated submodule succeeds' ' git reset --hard && test_must_fail git merge conflict2 && git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -579,17 +608,18 @@ test_expect_success 'rm of a populated submodule with a .git directory migrates git checkout -f master && git reset --hard && git submodule update && - (cd submod && + ( + cd submod && rm .git && cp -R ../.git/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree && rm -r ../.git/modules/sub ) && git rm submod 2>output.err && - ! test -d submod && - ! test -d submod/.git && + test_path_is_missing submod && + test_path_is_missing submod/.git && git status -s -uno --ignore-submodules=none >actual && - test -s actual && + test_file_not_empty actual && test_i18ngrep Migrating output.err ' @@ -600,8 +630,10 @@ EOF test_expect_success 'setup subsubmodule' ' git reset --hard && git submodule update && - (cd submod && - git update-index --add --cacheinfo 160000 $(git rev-parse HEAD) subsubmod && + ( + cd submod && + hash=$(git rev-parse HEAD) && + git update-index --add --cacheinfo 160000 "$hash" subsubmod && git config -f .gitmodules submodule.sub.url ../. && git config -f .gitmodules submodule.sub.path subsubmod && git submodule init && @@ -614,7 +646,7 @@ test_expect_success 'setup subsubmodule' ' test_expect_success 'rm recursively removes work tree of unmodified submodules' ' git rm submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -624,12 +656,12 @@ test_expect_success 'rm of a populated nested submodule with different nested HE git submodule update --recursive && git -C submod/subsubmod checkout HEAD^ && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -639,12 +671,12 @@ test_expect_success 'rm of a populated nested submodule with nested modification git submodule update --recursive && echo X >submod/subsubmod/empty && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_inside actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -654,12 +686,12 @@ test_expect_success 'rm of a populated nested submodule with nested untracked fi git submodule update --recursive && echo X >submod/subsubmod/untracked && test_must_fail git rm submod && - test -d submod && - test -f submod/.git && + test_path_is_dir submod && + test_path_is_file submod/.git && git status -s -uno --ignore-submodules=none >actual && test_cmp expect.modified_untracked actual && git rm -f submod && - test ! -d submod && + test_path_is_missing submod && git status -s -uno --ignore-submodules=none >actual && test_cmp expect actual ' @@ -667,16 +699,17 @@ test_expect_success 'rm of a populated nested submodule with nested untracked fi test_expect_success "rm absorbs submodule's nested .git directory" ' git reset --hard && git submodule update --recursive && - (cd submod/subsubmod && + ( + cd submod/subsubmod && rm .git && mv ../../.git/modules/sub/modules/sub .git && GIT_WORK_TREE=. git config --unset core.worktree ) && git rm submod 2>output.err && - ! test -d submod && - ! test -d submod/subsubmod/.git && + test_path_is_missing submod && + test_path_is_missing submod/subsubmod/.git && git status -s -uno --ignore-submodules=none >actual && - test -s actual && + test_file_not_empty actual && test_i18ngrep Migrating output.err ' diff --git a/t/t3601-rm-pathspec-file.sh b/t/t3601-rm-pathspec-file.sh new file mode 100755 index 0000000..7de21f8 --- /dev/null +++ b/t/t3601-rm-pathspec-file.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='rm --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "files" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success 'simplest' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileA.t + EOF + + echo fileA.t | git rm --pathspec-from-file=- && + verify_expect +' + +test_expect_success '--pathspec-file-nul' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | git rm --pathspec-from-file=- --pathspec-file-nul && + verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + cat >expect <<-\EOF && + D fileB.t + D fileC.t + EOF + + printf "fileB.t\nfileC.t\n" | git rm --pathspec-from-file=- && + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + + test_must_fail git rm --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git rm --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + >empty_list && + test_must_fail git rm --pathspec-from-file=empty_list 2>err && + test_i18ngrep -e "No pathspec was given. Which files should I remove?" err +' + +test_done diff --git a/t/t3700-add.sh b/t/t3700-add.sh index 37729ba..88bc7998 100755 --- a/t/t3700-add.sh +++ b/t/t3700-add.sh @@ -296,6 +296,17 @@ test_expect_success '"git add ." in empty repo' ' ) ' +test_expect_success 'error on a repository with no commits' ' + rm -fr empty && + git init empty && + test_must_fail git add empty >actual 2>&1 && + cat >expect <<-EOF && + error: '"'empty/'"' does not have a commit checked out + fatal: adding files failed + EOF + test_i18ncmp expect actual +' + test_expect_success 'git add --dry-run of existing changed file' " echo new >>track-this && git add --dry-run track-this >actual 2>&1 && @@ -315,7 +326,9 @@ test_expect_success 'git add --dry-run of an existing file output' " cat >expect.err <<\EOF The following paths are ignored by one of your .gitignore files: ignored-file -Use -f if you really want to add them. +hint: Use -f if you really want to add them. +hint: Turn this message off by running +hint: "git config advice.addIgnoredFile false" EOF cat >expect.out <<\EOF add 'track-this' @@ -396,10 +409,18 @@ test_expect_success 'no file status change if no pathspec is given in subdir' ' ' test_expect_success 'all statuses changed in folder if . is given' ' + rm -fr empty && git add --chmod=+x . && test $(git ls-files --stage | grep ^100644 | wc -l) -eq 0 && git add --chmod=-x . && test $(git ls-files --stage | grep ^100755 | wc -l) -eq 0 ' +test_expect_success CASE_INSENSITIVE_FS 'path is case-insensitive' ' + path="$(pwd)/BLUB" && + touch "$path" && + downcased="$(echo "$path" | tr A-Z a-z)" && + git add "$downcased" +' + test_done diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 65dfbc0..5bae6e5 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -23,6 +23,17 @@ diff_cmp () { test_cmp "$1.filtered" "$2.filtered" } +# This function uses a trick to manipulate the interactive add to use color: +# the `want_color()` function special-cases the situation where a pager was +# spawned and Git now wants to output colored text: to detect that situation, +# the environment variable `GIT_PAGER_IN_USE` is set. However, color is +# suppressed despite that environment variable if the `TERM` variable +# indicates a dumb terminal, so we set that variable, too. + +force_color () { + env GIT_PAGER_IN_USE=true TERM=vt100 "$@" +} + test_expect_success 'setup (initial)' ' echo content >file && git add file && @@ -57,6 +68,15 @@ test_expect_success 'revert works (initial)' ' ! grep . output ' +test_expect_success 'add untracked (multiple)' ' + test_when_finished "git reset && rm [1-9]" && + touch $(test_seq 9) && + test_write_lines a "2-5 8-" | git add -i -- [1-9] && + test_write_lines 2 3 4 5 8 9 >expected && + git ls-files [1-9] >output && + test_cmp expected output +' + test_expect_success 'setup (commit)' ' echo baseline >file && git add file && @@ -94,7 +114,6 @@ test_expect_success 'revert works (commit)' ' grep "unchanged *+3/-0 file" output ' - test_expect_success 'setup expected' ' cat >expected <<-\EOF EOF @@ -263,6 +282,35 @@ test_expect_success FILEMODE 'stage mode and hunk' ' # end of tests disabled when filemode is not usable +test_expect_success 'different prompts for mode change/deleted' ' + git reset --hard && + >file && + >deleted && + git add --chmod=+x file deleted && + echo changed >file && + rm deleted && + test_write_lines n n n | + git -c core.filemode=true add -p >actual && + sed -n "s/^\(([0-9/]*) Stage .*?\).*/\1/p" actual >actual.filtered && + cat >expect <<-\EOF && + (1/1) Stage deletion [y,n,q,a,d,?]? + (1/2) Stage mode change [y,n,q,a,d,j,J,g,/,?]? + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? + EOF + test_cmp expect actual.filtered +' + +test_expect_success 'correct message when there is nothing to do' ' + git reset --hard && + git add -p 2>err && + test_i18ngrep "No changes" err && + printf "\\0123" >binary && + git add binary && + printf "\\0abc" >binary && + git add -p 2>err && + test_i18ngrep "Only binary files changed" err +' + test_expect_success 'setup again' ' git reset --hard && test_chmod +x file && @@ -314,7 +362,7 @@ test_expect_success C_LOCALE_OUTPUT 'add first line works' ' git commit -am "clear local changes" && git apply patch && printf "%s\n" s y y | git add -p file 2>error | - sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \ + sed -n -e "s/^([1-2]\/[1-2]) Stage this hunk[^@]*\(@@ .*\)/\1/" \ -e "/^[-+@ \\\\]"/p >output && test_must_be_empty error && git diff --cached >diff && @@ -374,6 +422,36 @@ test_expect_success 'split hunk setup' ' test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test ' +test_expect_success 'goto hunk' ' + test_when_finished "git reset" && + tr _ " " >expect <<-EOF && + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? + 1: -1,2 +1,3 +15 + _ 2: -2,4 +3,8 +21 + go to which hunk? @@ -1,2 +1,3 @@ + _10 + +15 + _20 + (1/2) Stage this hunk [y,n,q,a,d,j,J,g,/,e,?]?_ + EOF + test_write_lines s y g 1 | git add -p >actual && + tail -n 7 <actual >actual.trimmed && + test_cmp expect actual.trimmed +' + +test_expect_success 'navigate to hunk via regex' ' + test_when_finished "git reset" && + tr _ " " >expect <<-EOF && + (2/2) Stage this hunk [y,n,q,a,d,K,g,/,e,?]? @@ -1,2 +1,3 @@ + _10 + +15 + _20 + (1/2) Stage this hunk [y,n,q,a,d,j,J,g,/,e,?]?_ + EOF + test_write_lines s y /1,2 | git add -p >actual && + tail -n 5 <actual >actual.trimmed && + test_cmp expect actual.trimmed +' + test_expect_success 'split hunk "add -p (edit)"' ' # Split, say Edit and do nothing. Then: # @@ -403,6 +481,40 @@ test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' ! grep "^+31" actual ' +test_expect_success 'split hunk with incomplete line at end' ' + git reset --hard && + printf "missing LF" >>test && + git add test && + test_write_lines before 10 20 30 40 50 60 70 >test && + git grep --cached missing && + test_write_lines s n y q | git add -p && + test_must_fail git grep --cached missing && + git grep before && + test_must_fail git grep --cached before +' + +test_expect_failure 'edit, adding lines to the first hunk' ' + test_write_lines 10 11 20 30 40 50 51 60 >test && + git reset && + tr _ " " >patch <<-EOF && + @@ -1,5 +1,6 @@ + _10 + +11 + +12 + _20 + +21 + +22 + _30 + EOF + # test sequence is s(plit), e(dit), n(o) + # q n q q is there to make sure we exit at the end. + printf "%s\n" s e n q n q q | + EDITOR=./fake_editor.sh git add -p 2>error && + test_must_be_empty error && + git diff --cached >actual && + grep "^+22" actual +' + test_expect_success 'patch mode ignores unmerged entries' ' git reset --hard && test_commit conflict && @@ -429,35 +541,61 @@ test_expect_success 'patch mode ignores unmerged entries' ' diff_cmp expected diff ' -test_expect_success TTY 'diffs can be colorized' ' +test_expect_success 'diffs can be colorized' ' git reset --hard && echo content >test && - printf y | test_terminal git add -p >output 2>&1 && + printf y >y && + force_color git add -p >output 2>&1 <y && # We do not want to depend on the exact coloring scheme # git uses for diffs, so just check that we saw some kind of color. grep "$(printf "\\033")" output ' -test_expect_success TTY 'diffFilter filters diff' ' +test_expect_success 'colorized diffs respect diff.wsErrorHighlight' ' + git reset --hard && + + echo "old " >test && + git add test && + echo "new " >test && + + printf y >y && + force_color git -c diff.wsErrorHighlight=all add -p >output.raw 2>&1 <y && + test_decode_color <output.raw >output && + grep "old<" output +' + +test_expect_success 'diffFilter filters diff' ' git reset --hard && echo content >test && test_config interactive.diffFilter "sed s/^/foo:/" && - printf y | test_terminal git add -p >output 2>&1 && + printf y >y && + force_color git add -p >output 2>&1 <y && # avoid depending on the exact coloring or content of the prompts, # and just make sure we saw our diff prefixed grep foo:.*content output ' -test_expect_success TTY 'detect bogus diffFilter output' ' +test_expect_success 'detect bogus diffFilter output' ' git reset --hard && echo content >test && - test_config interactive.diffFilter "echo too-short" && - printf y | test_must_fail test_terminal git add -p + test_config interactive.diffFilter "sed 1d" && + printf y >y && + test_must_fail force_color git add -p <y +' + +test_expect_success 'diff.algorithm is passed to `git diff-files`' ' + git reset --hard && + + >file && + git add file && + echo changed >file && + test_must_fail git -c diff.algorithm=bogus add -p 2>err && + test_i18ngrep "error: option diff-algorithm accepts " err ' test_expect_success 'patch-mode via -i prompts for files' ' @@ -639,4 +777,37 @@ test_expect_success 'add -p patch editing works with pathological context lines' test_cmp expected-2 actual ' +test_expect_success 'checkout -p works with pathological context lines' ' + test_write_lines a a a a a a >a && + git add a && + test_write_lines a b a b a b a b a b a > a&& + test_write_lines s n n y q | git checkout -p && + test_write_lines a b a b a a b a b a >expect && + test_cmp expect a +' + +test_expect_success 'show help from add--helper' ' + git reset --hard && + cat >expect <<-EOF && + + <BOLD>*** Commands ***<RESET> + 1: <BOLD;BLUE>s<RESET>tatus 2: <BOLD;BLUE>u<RESET>pdate 3: <BOLD;BLUE>r<RESET>evert 4: <BOLD;BLUE>a<RESET>dd untracked + 5: <BOLD;BLUE>p<RESET>atch 6: <BOLD;BLUE>d<RESET>iff 7: <BOLD;BLUE>q<RESET>uit 8: <BOLD;BLUE>h<RESET>elp + <BOLD;BLUE>What now<RESET>> <BOLD;RED>status - show paths with changes<RESET> + <BOLD;RED>update - add working tree state to the staged set of changes<RESET> + <BOLD;RED>revert - revert staged set of changes back to the HEAD version<RESET> + <BOLD;RED>patch - pick hunks and update selectively<RESET> + <BOLD;RED>diff - view diff between HEAD and index<RESET> + <BOLD;RED>add untracked - add contents of untracked files to the staged set of changes<RESET> + <BOLD>*** Commands ***<RESET> + 1: <BOLD;BLUE>s<RESET>tatus 2: <BOLD;BLUE>u<RESET>pdate 3: <BOLD;BLUE>r<RESET>evert 4: <BOLD;BLUE>a<RESET>dd untracked + 5: <BOLD;BLUE>p<RESET>atch 6: <BOLD;BLUE>d<RESET>iff 7: <BOLD;BLUE>q<RESET>uit 8: <BOLD;BLUE>h<RESET>elp + <BOLD;BLUE>What now<RESET>>$SP + Bye. + EOF + test_write_lines h | force_color git add -i >actual.colored && + test_decode_color <actual.colored >actual && + test_i18ncmp expect actual +' + test_done diff --git a/t/t3704-add-pathspec-file.sh b/t/t3704-add-pathspec-file.sh new file mode 100755 index 0000000..9e35c1f --- /dev/null +++ b/t/t3704-add-pathspec-file.sh @@ -0,0 +1,159 @@ +#!/bin/sh + +test_description='add --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t +' + +restore_checkpoint () { + git reset +} + +verify_expect () { + git status --porcelain --untracked-files=no -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git add --pathspec-from-file=list && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git add --pathspec-from-file=- --pathspec-file-nul && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git add --pathspec-from-file=list && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git add --pathspec-from-file=list --pathspec-file-nul +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git add --pathspec-from-file=- && + + cat >expect <<-\EOF && + A fileB.t + A fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git add --pathspec-from-file=list --interactive 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git add --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git add --pathspec-from-file=list --edit 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --edit" err && + + test_must_fail git add --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git add --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + # This case succeeds, but still prints to stderr + git add --pathspec-from-file=empty_list 2>err && + test_i18ngrep -e "Nothing specified, nothing added." err +' + +test_done diff --git a/t/t3800-mktag.sh b/t/t3800-mktag.sh index 8eb4794..64dcc5e 100755 --- a/t/t3800-mktag.sh +++ b/t/t3800-mktag.sh @@ -23,6 +23,7 @@ check_verify_failure () { # first create a commit, so we have a valid object/type # for the tag. test_expect_success 'setup' ' + test_oid_init && echo Hello >A && git update-index --add A && git commit -m "Initial commit" && @@ -69,28 +70,28 @@ check_verify_failure '"object" line SHA1 check' '^error: char7: .*SHA1 hash$' # 4. type line label check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head xxxx tag tag mytag tagger . <> 0 +0000 EOF -check_verify_failure '"type" line label check' '^error: char47: .*"\\ntype "$' +check_verify_failure '"type" line label check' '^error: char.*: .*"\\ntype "$' ############################################################ # 5. type line eol check -echo "object 779e9b33986b1c2670fff52c5067603117b3e895" >tag.sig +echo "object $head" >tag.sig printf "type tagsssssssssssssssssssssssssssssss" >>tag.sig -check_verify_failure '"type" line eol check' '^error: char48: .*"\\n"$' +check_verify_failure '"type" line eol check' '^error: char.*: .*"\\n"$' ############################################################ # 6. tag line label check #1 cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type tag xxx mytag tagger . <> 0 +0000 @@ -98,37 +99,37 @@ tagger . <> 0 +0000 EOF check_verify_failure '"tag" line label check #1' \ - '^error: char57: no "tag " found$' + '^error: char.*: no "tag " found$' ############################################################ # 7. tag line label check #2 cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type taggggggggggggggggggggggggggggggg tag EOF check_verify_failure '"tag" line label check #2' \ - '^error: char87: no "tag " found$' + '^error: char.*: no "tag " found$' ############################################################ # 8. type line type-name length check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $head type taggggggggggggggggggggggggggggggg tag mytag EOF check_verify_failure '"type" line type-name length check' \ - '^error: char53: type too long$' + '^error: char.*: type too long$' ############################################################ # 9. verify object (SHA1/type) check cat >tag.sig <<EOF -object 779e9b33986b1c2670fff52c5067603117b3e895 +object $(test_oid deadbeef) type tagggg tag mytag tagger . <> 0 +0000 @@ -150,7 +151,7 @@ tagger . <> 0 +0000 EOF check_verify_failure 'verify tag-name check' \ - '^error: char67: could not verify tag name$' + '^error: char.*: could not verify tag name$' ############################################################ # 11. tagger line label check #1 @@ -164,7 +165,7 @@ This is filler EOF check_verify_failure '"tagger" line label check #1' \ - '^error: char70: could not find "tagger "$' + '^error: char.*: could not find "tagger "$' ############################################################ # 12. tagger line label check #2 @@ -179,7 +180,7 @@ This is filler EOF check_verify_failure '"tagger" line label check #2' \ - '^error: char70: could not find "tagger "$' + '^error: char.*: could not find "tagger "$' ############################################################ # 13. disallow missing tag author name @@ -194,7 +195,7 @@ This is filler EOF check_verify_failure 'disallow missing tag author name' \ - '^error: char77: missing tagger name$' + '^error: char.*: missing tagger name$' ############################################################ # 14. disallow missing tag author name @@ -209,7 +210,7 @@ tagger T A Gger < EOF check_verify_failure 'disallow malformed tagger' \ - '^error: char77: malformed tagger field$' + '^error: char.*: malformed tagger field$' ############################################################ # 15. allow empty tag email @@ -238,7 +239,7 @@ tagger T A Gger <tag ger@example.com> 0 +0000 EOF check_verify_failure 'disallow spaces in tag email' \ - '^error: char77: malformed tagger field$' + '^error: char.*: malformed tagger field$' ############################################################ # 17. disallow missing tag timestamp @@ -252,7 +253,7 @@ tagger T A Gger <tagger@example.com>__ EOF check_verify_failure 'disallow missing tag timestamp' \ - '^error: char107: missing tag timestamp$' + '^error: char.*: missing tag timestamp$' ############################################################ # 18. detect invalid tag timestamp1 @@ -266,7 +267,7 @@ tagger T A Gger <tagger@example.com> Tue Mar 25 15:47:44 2008 EOF check_verify_failure 'detect invalid tag timestamp1' \ - '^error: char107: missing tag timestamp$' + '^error: char.*: missing tag timestamp$' ############################################################ # 19. detect invalid tag timestamp2 @@ -280,7 +281,7 @@ tagger T A Gger <tagger@example.com> 2008-03-31T12:20:15-0500 EOF check_verify_failure 'detect invalid tag timestamp2' \ - '^error: char111: malformed tag timestamp$' + '^error: char.*: malformed tag timestamp$' ############################################################ # 20. detect invalid tag timezone1 @@ -294,7 +295,7 @@ tagger T A Gger <tagger@example.com> 1206478233 GMT EOF check_verify_failure 'detect invalid tag timezone1' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 21. detect invalid tag timezone2 @@ -308,7 +309,7 @@ tagger T A Gger <tagger@example.com> 1206478233 + 30 EOF check_verify_failure 'detect invalid tag timezone2' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 22. detect invalid tag timezone3 @@ -322,7 +323,7 @@ tagger T A Gger <tagger@example.com> 1206478233 -1430 EOF check_verify_failure 'detect invalid tag timezone3' \ - '^error: char118: malformed tag timezone$' + '^error: char.*: malformed tag timezone$' ############################################################ # 23. detect invalid header entry @@ -337,7 +338,7 @@ this line should not be here EOF check_verify_failure 'detect invalid header entry' \ - '^error: char124: trailing garbage in tag header$' + '^error: char.*: trailing garbage in tag header$' ############################################################ # 24. create valid tag diff --git a/t/t3900-i18n-commit.sh b/t/t3900-i18n-commit.sh index b92ff95..d277a9f 100755 --- a/t/t3900-i18n-commit.sh +++ b/t/t3900-i18n-commit.sh @@ -204,4 +204,41 @@ test_commit_autosquash_flags eucJP fixup test_commit_autosquash_flags ISO-2022-JP squash +test_commit_autosquash_multi_encoding () { + flag=$1 + old=$2 + new=$3 + msg=$4 + test_expect_success "commit --$flag into $old from $new" ' + git checkout -b $flag-$old-$new C0 && + git config i18n.commitencoding $old && + echo $old >>F && + git commit -a -F "$TEST_DIRECTORY"/t3900/$msg && + test_tick && + echo intermediate stuff >>G && + git add G && + git commit -a -m "intermediate commit" && + test_tick && + git config i18n.commitencoding $new && + echo $new-$flag >>F && + git commit -a --$flag HEAD^ && + git rebase --autosquash -i HEAD^^^ && + git rev-list HEAD >actual && + test_line_count = 3 actual && + iconv -f $old -t UTF-8 "$TEST_DIRECTORY"/t3900/$msg >expect && + if test $flag = squash; then + subject="$(head -1 expect)" && + printf "\nsquash! %s\n" "$subject" >>expect + fi && + git cat-file commit HEAD^ >raw && + (sed "1,/^$/d" raw | iconv -f $new -t utf-8) >actual && + test_cmp expect actual + ' +} + +test_commit_autosquash_multi_encoding fixup UTF-8 ISO-8859-1 1-UTF-8.txt +test_commit_autosquash_multi_encoding squash ISO-8859-1 UTF-8 ISO8859-1.txt +test_commit_autosquash_multi_encoding squash eucJP ISO-2022-JP eucJP.txt +test_commit_autosquash_multi_encoding fixup ISO-2022-JP UTF-8 ISO-2022-JP.txt + test_done diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index cd21665..3ad23e2 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -7,23 +7,35 @@ test_description='Test git stash' . ./test-lib.sh +diff_cmp () { + for i in "$1" "$2" + do + sed -e 's/^index 0000000\.\.[0-9a-f]*/index 0000000..1234567/' \ + -e 's/^index [0-9a-f]*\.\.[0-9a-f]*/index 1234567..89abcde/' \ + -e 's/^index [0-9a-f]*,[0-9a-f]*\.\.[0-9a-f]*/index 1234567,7654321..89abcde/' \ + "$i" >"$i.compare" || return 1 + done && + test_cmp "$1.compare" "$2.compare" && + rm -f "$1.compare" "$2.compare" +} + test_expect_success 'stash some dirty working directory' ' - echo 1 > file && + echo 1 >file && git add file && echo unrelated >other-file && git add other-file && test_tick && git commit -m initial && - echo 2 > file && + echo 2 >file && git add file && - echo 3 > file && + echo 3 >file && test_tick && git stash && git diff-files --quiet && git diff-index --cached --quiet HEAD ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file b/file index 0cfbf08..00750ed 100644 --- a/file @@ -35,8 +47,8 @@ EOF test_expect_success 'parents of stash' ' test $(git rev-parse stash^) = $(git rev-parse HEAD) && - git diff stash^2..stash > output && - test_cmp expect output + git diff stash^2..stash >output && + diff_cmp expect output ' test_expect_success 'applying bogus stash does nothing' ' @@ -74,7 +86,7 @@ test_expect_success 'apply stashed changes' ' test_expect_success 'apply stashed changes (including index)' ' git reset --hard HEAD^ && - echo 6 > other-file && + echo 6 >other-file && git add other-file && test_tick && git commit -m other-file && @@ -99,12 +111,12 @@ test_expect_success 'stash drop complains of extra options' ' test_expect_success 'drop top stash' ' git reset --hard && - git stash list > stashlist1 && - echo 7 > file && + git stash list >expected && + echo 7 >file && git stash && git stash drop && - git stash list > stashlist2 && - test_cmp stashlist1 stashlist2 && + git stash list >actual && + test_cmp expected actual && git stash apply && test 3 = $(cat file) && test 1 = $(git show :file) && @@ -113,9 +125,9 @@ test_expect_success 'drop top stash' ' test_expect_success 'drop middle stash' ' git reset --hard && - echo 8 > file && + echo 8 >file && git stash && - echo 9 > file && + echo 9 >file && git stash && git stash drop stash@{1} && test 2 = $(git stash list | wc -l) && @@ -160,7 +172,7 @@ test_expect_success 'stash pop' ' test 0 = $(git stash list | wc -l) ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file2 b/file2 new file mode 100644 index 0000000..1fe912c @@ -170,7 +182,7 @@ index 0000000..1fe912c +bar2 EOF -cat > expect1 << EOF +cat >expect1 <<EOF diff --git a/file b/file index 257cc56..5716ca5 100644 --- a/file @@ -180,7 +192,7 @@ index 257cc56..5716ca5 100644 +bar EOF -cat > expect2 << EOF +cat >expect2 <<EOF diff --git a/file b/file index 7601807..5716ca5 100644 --- a/file @@ -198,79 +210,89 @@ index 0000000..1fe912c EOF test_expect_success 'stash branch' ' - echo foo > file && + echo foo >file && git commit file -m first && - echo bar > file && - echo bar2 > file2 && + echo bar >file && + echo bar2 >file2 && git add file2 && git stash && - echo baz > file && + echo baz >file && git commit file -m second && git stash branch stashbranch && test refs/heads/stashbranch = $(git symbolic-ref HEAD) && test $(git rev-parse HEAD) = $(git rev-parse master^) && - git diff --cached > output && - test_cmp expect output && - git diff > output && - test_cmp expect1 output && + git diff --cached >output && + diff_cmp expect output && + git diff >output && + diff_cmp expect1 output && git add file && git commit -m alternate\ second && - git diff master..stashbranch > output && - test_cmp output expect2 && + git diff master..stashbranch >output && + diff_cmp output expect2 && test 0 = $(git stash list | wc -l) ' test_expect_success 'apply -q is quiet' ' - echo foo > file && + echo foo >file && git stash && - git stash apply -q > output.out 2>&1 && + git stash apply -q >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'save -q is quiet' ' - git stash save --quiet > output.out 2>&1 && + git stash save --quiet >output.out 2>&1 && test_must_be_empty output.out ' -test_expect_success 'pop -q is quiet' ' - git stash pop -q > output.out 2>&1 && +test_expect_success 'pop -q works and is quiet' ' + git stash pop -q >output.out 2>&1 && + echo bar >expect && + git show :file >actual && + test_cmp expect actual && test_must_be_empty output.out ' test_expect_success 'pop -q --index works and is quiet' ' - echo foo > file && + echo foo >file && git add file && git stash save --quiet && - git stash pop -q --index > output.out 2>&1 && + git stash pop -q --index >output.out 2>&1 && + git diff-files file2 >file2.diff && + test_must_be_empty file2.diff && test foo = "$(git show :file)" && test_must_be_empty output.out ' test_expect_success 'drop -q is quiet' ' git stash && - git stash drop -q > output.out 2>&1 && + git stash drop -q >output.out 2>&1 && test_must_be_empty output.out ' test_expect_success 'stash -k' ' - echo bar3 > file && - echo bar4 > file2 && + echo bar3 >file && + echo bar4 >file2 && git add file2 && git stash -k && test bar,bar4 = $(cat file),$(cat file2) ' test_expect_success 'stash --no-keep-index' ' - echo bar33 > file && - echo bar44 > file2 && + echo bar33 >file && + echo bar44 >file2 && git add file2 && git stash --no-keep-index && test bar,bar2 = $(cat file),$(cat file2) ' +test_expect_success 'dont assume push with non-option args' ' + test_must_fail git stash -q drop 2>err && + test_i18ngrep -e "subcommand wasn'\''t specified; '\''push'\'' can'\''t be assumed due to unexpected token '\''drop'\''" err +' + test_expect_success 'stash --invalid-option' ' - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && test_must_fail git stash --invalid-option && test_must_fail git stash save --invalid-option && @@ -287,6 +309,14 @@ test_expect_success 'stash an added file' ' test new = "$(cat file3)" ' +test_expect_success 'stash --intent-to-add file' ' + git reset --hard && + echo new >file4 && + git add --intent-to-add file4 && + test_when_finished "git rm -f file4" && + test_must_fail git stash +' + test_expect_success 'stash rm then recreate' ' git reset --hard && git rm file && @@ -444,6 +474,36 @@ test_expect_failure 'stash file to directory' ' test foo = "$(cat file/file)" ' +test_expect_success 'giving too many ref arguments does not modify files' ' + git stash clear && + test_when_finished "git reset --hard HEAD" && + echo foo >file2 && + git stash && + echo bar >file2 && + git stash && + test-tool chmtime =123456789 file2 && + for type in apply pop "branch stash-branch" + do + test_must_fail git stash $type stash@{0} stash@{1} 2>err && + test_i18ngrep "Too many revisions" err && + test 123456789 = $(test-tool chmtime -g file2) || return 1 + done +' + +test_expect_success 'drop: too many arguments errors out (does nothing)' ' + git stash list >expect && + test_must_fail git stash drop stash@{0} stash@{1} 2>err && + test_i18ngrep "Too many revisions" err && + git stash list >actual && + test_cmp expect actual +' + +test_expect_success 'show: too many arguments errors out (does nothing)' ' + test_must_fail git stash show stash@{0} stash@{1} 2>err 1>out && + test_i18ngrep "Too many revisions" err && + test_must_be_empty out +' + test_expect_success 'stash create - no changes' ' git stash clear && test_when_finished "git reset --hard HEAD" && @@ -456,11 +516,12 @@ test_expect_success 'stash branch - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && git stash branch stash-branch ${STASH_ID} && - test_when_finished "git reset --hard HEAD && git checkout master && git branch -D stash-branch" && + test_when_finished "git reset --hard HEAD && git checkout master && + git branch -D stash-branch" && test $(git ls-files --modified | wc -l) -eq 1 ' @@ -468,25 +529,31 @@ test_expect_success 'stash branch - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && git stash branch stash-branch ${STASH_ID} && - test_when_finished "git reset --hard HEAD && git checkout master && git branch -D stash-branch" && + test_when_finished "git reset --hard HEAD && git checkout master && + git branch -D stash-branch" && test $(git ls-files --modified | wc -l) -eq 1 ' +test_expect_success 'stash branch complains with no arguments' ' + test_must_fail git stash branch 2>err && + test_i18ngrep "No branch name specified" err +' + test_expect_success 'stash show format defaults to --stat' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -501,10 +568,10 @@ test_expect_success 'stash show - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && echo "1 0 file" >expected && @@ -516,10 +583,10 @@ test_expect_success 'stash show -p - stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && git stash && test_when_finished "git stash drop" && - echo bar >> file && + echo bar >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -532,14 +599,14 @@ test_expect_success 'stash show -p - stashes on stack, stash-like argument' ' +bar EOF git stash show -p ${STASH_ID} >actual && - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'stash show - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && echo "1 0 file" >expected && @@ -551,7 +618,7 @@ test_expect_success 'stash show -p - no stashes on stack, stash-like argument' ' git stash clear && test_when_finished "git reset --hard HEAD" && git reset --hard && - echo foo >> file && + echo foo >>file && STASH_ID=$(git stash create) && git reset --hard && cat >expected <<-EOF && @@ -564,16 +631,34 @@ test_expect_success 'stash show -p - no stashes on stack, stash-like argument' ' +foo EOF git stash show -p ${STASH_ID} >actual && - test_cmp expected actual + diff_cmp expected actual +' + +test_expect_success 'stash show --patience shows diff' ' + git reset --hard && + echo foo >>file && + STASH_ID=$(git stash create) && + git reset --hard && + cat >expected <<-EOF && + diff --git a/file b/file + index 7601807..71b52c4 100644 + --- a/file + +++ b/file + @@ -1 +1,2 @@ + baz + +foo + EOF + git stash show --patience ${STASH_ID} >actual && + diff_cmp expected actual ' -test_expect_success 'stash drop - fail early if specified stash is not a stash reference' ' +test_expect_success 'drop: fail early if specified stash is not a stash ref' ' git stash clear && test_when_finished "git reset --hard HEAD && git stash clear" && git reset --hard && - echo foo > file && + echo foo >file && git stash && - echo bar > file && + echo bar >file && git stash && test_must_fail git stash drop $(git rev-parse stash@{0}) && git stash pop && @@ -581,13 +666,13 @@ test_expect_success 'stash drop - fail early if specified stash is not a stash r git reset --hard HEAD ' -test_expect_success 'stash pop - fail early if specified stash is not a stash reference' ' +test_expect_success 'pop: fail early if specified stash is not a stash ref' ' git stash clear && test_when_finished "git reset --hard HEAD && git stash clear" && git reset --hard && - echo foo > file && + echo foo >file && git stash && - echo bar > file && + echo bar >file && git stash && test_must_fail git stash pop $(git rev-parse stash@{0}) && git stash pop && @@ -597,8 +682,8 @@ test_expect_success 'stash pop - fail early if specified stash is not a stash re test_expect_success 'ref with non-existent reflog' ' git stash clear && - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && git stash && test_must_fail git rev-parse --quiet --verify does-not-exist && @@ -618,8 +703,8 @@ test_expect_success 'ref with non-existent reflog' ' test_expect_success 'invalid ref of the form stash@{n}, n >= N' ' git stash clear && test_must_fail git stash drop stash@{0} && - echo bar5 > file && - echo bar6 > file2 && + echo bar5 >file && + echo bar6 >file2 && git add file2 && git stash && test_must_fail git stash drop stash@{1} && @@ -645,7 +730,25 @@ test_expect_success 'invalid ref of the form "n", n >= N' ' git stash drop ' -test_expect_success 'stash branch should not drop the stash if the branch exists' ' +test_expect_success 'valid ref of the form "n", n < N' ' + git stash clear && + echo bar5 >file && + echo bar6 >file2 && + git add file2 && + git stash && + git stash show 0 && + git stash branch tmp 0 && + git checkout master && + git stash && + git stash apply 0 && + git reset --hard && + git stash pop 0 && + git stash && + git stash drop 0 && + test_must_fail git stash drop +' + +test_expect_success 'branch: do not drop the stash if the branch exists' ' git stash clear && echo foo >file && git add file && @@ -656,7 +759,7 @@ test_expect_success 'stash branch should not drop the stash if the branch exists git rev-parse stash@{0} -- ' -test_expect_success 'stash branch should not drop the stash if the apply fails' ' +test_expect_success 'branch: should not drop the stash if the apply fails' ' git stash clear && git reset HEAD~1 --hard && echo foo >file && @@ -670,7 +773,7 @@ test_expect_success 'stash branch should not drop the stash if the apply fails' git rev-parse stash@{0} -- ' -test_expect_success 'stash apply shows status same as git status (relative to current directory)' ' +test_expect_success 'apply: show same status as git status (relative to ./)' ' git stash clear && echo 1 >subdir/subfile1 && echo 2 >subdir/subfile2 && @@ -689,7 +792,7 @@ test_expect_success 'stash apply shows status same as git status (relative to cu test_i18ncmp expect actual ' -cat > expect << EOF +cat >expect <<EOF diff --git a/HEAD b/HEAD new file mode 100644 index 0000000..fe0cbee @@ -702,15 +805,15 @@ EOF test_expect_success 'stash where working directory contains "HEAD" file' ' git stash clear && git reset --hard && - echo file-not-a-ref > HEAD && + echo file-not-a-ref >HEAD && git add HEAD && test_tick && git stash && git diff-files --quiet && git diff-index --cached --quiet HEAD && test "$(git rev-parse stash^)" = "$(git rev-parse HEAD)" && - git diff stash^..stash > output && - test_cmp expect output + git diff stash^..stash >output && + diff_cmp expect output ' test_expect_success 'store called with invalid commit' ' @@ -766,7 +869,7 @@ test_expect_success 'stash list implies --first-parent -m' ' +working EOF git stash list --format=%gd -p >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'stash list --cc shows combined diff' ' @@ -783,7 +886,7 @@ test_expect_success 'stash list --cc shows combined diff' ' ++working EOF git stash list --format=%gd -p --cc >actual && - test_cmp expect actual + diff_cmp expect actual ' test_expect_success 'stash is not confused by partial renames' ' @@ -1011,7 +1114,7 @@ test_expect_success 'stash push -p with pathspec shows no changes only once' ' test_i18ncmp expect actual ' -test_expect_success 'stash push with pathspec shows no changes when there are none' ' +test_expect_success 'push <pathspec>: show no changes when there are none' ' >foo && git add foo && git commit -m "tmp" && @@ -1021,12 +1124,35 @@ test_expect_success 'stash push with pathspec shows no changes when there are no test_i18ncmp expect actual ' -test_expect_success 'stash push with pathspec not in the repository errors out' ' +test_expect_success 'push: <pathspec> not in the repository errors out' ' >untracked && test_must_fail git stash push untracked && test_path_is_file untracked ' +test_expect_success 'push: -q is quiet with changes' ' + >foo && + git add foo && + git stash push -q >output 2>&1 && + test_must_be_empty output +' + +test_expect_success 'push: -q is quiet with no changes' ' + git stash push -q >output 2>&1 && + test_must_be_empty output +' + +test_expect_success 'push: -q is quiet even if there is no initial commit' ' + git init foo_dir && + test_when_finished rm -rf foo_dir && + ( + cd foo_dir && + >bar && + test_must_fail git stash push -q >output 2>&1 && + test_must_be_empty output + ) +' + test_expect_success 'untracked files are left in place when -u is not given' ' >file && git add file && @@ -1096,4 +1222,72 @@ test_expect_success 'stash -- <subdir> works with binary files' ' test_path_is_file subdir/untracked ' +test_expect_success 'stash with user.name and user.email set works' ' + test_config user.name "A U Thor" && + test_config user.email "a.u@thor" && + git stash +' + +test_expect_success 'stash works when user.name and user.email are not set' ' + git reset && + >1 && + git add 1 && + echo "$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" >expect && + git stash && + git show -s --format="%an <%ae>" refs/stash >actual && + test_cmp expect actual && + >2 && + git add 2 && + test_config user.useconfigonly true && + test_config stash.usebuiltin true && + ( + sane_unset GIT_AUTHOR_NAME && + sane_unset GIT_AUTHOR_EMAIL && + sane_unset GIT_COMMITTER_NAME && + sane_unset GIT_COMMITTER_EMAIL && + test_unconfig user.email && + test_unconfig user.name && + test_must_fail git commit -m "should fail" && + echo "git stash <git@stash>" >expect && + >2 && + git stash && + git show -s --format="%an <%ae>" refs/stash >actual && + test_cmp expect actual + ) +' + +test_expect_success 'stash --keep-index with file deleted in index does not resurrect it on disk' ' + test_commit to-remove to-remove && + git rm to-remove && + git stash --keep-index && + test_path_is_missing to-remove +' + +test_expect_success 'stash apply should succeed with unmodified file' ' + echo base >file && + git add file && + git commit -m base && + + # now stash a modification + echo modified >file && + git stash && + + # make the file stat dirty + cp file other && + mv other file && + + git stash apply +' + +test_expect_success 'stash handles skip-worktree entries nicely' ' + test_commit A && + echo changed >A.t && + git add A.t && + git update-index --skip-worktree A.t && + rm A.t && + git stash && + + git rev-parse --verify refs/stash:A.t +' + test_done diff --git a/t/t3905-stash-include-untracked.sh b/t/t3905-stash-include-untracked.sh index cc1c8a7..f075c7f 100755 --- a/t/t3905-stash-include-untracked.sh +++ b/t/t3905-stash-include-untracked.sh @@ -277,10 +277,16 @@ test_expect_success 'stash -u -- <ignored> leaves ignored file alone' ' test_path_is_file ignored.d/bar ' -test_expect_success 'stash -u -- <non-existant> shows no changes when there are none' ' - git stash push -u -- non-existant >actual && +test_expect_success 'stash -u -- <non-existent> shows no changes when there are none' ' + git stash push -u -- non-existent >actual && echo "No local changes to save" >expect && test_i18ncmp expect actual ' +test_expect_success 'stash -u with globs' ' + >untracked.txt && + git stash -u -- ":(glob)**/*.txt" && + test_path_is_missing untracked.txt +' + test_done diff --git a/t/t3906-stash-submodule.sh b/t/t3906-stash-submodule.sh index d7219d6..b93d1d7 100755 --- a/t/t3906-stash-submodule.sh +++ b/t/t3906-stash-submodule.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='stash apply can handle submodules' +test_description='stash can handle submodules' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-submodule-update.sh @@ -21,4 +21,44 @@ KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1 KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR=1 test_submodule_switch "git_stash" +setup_basic () { + test_when_finished "rm -rf main sub" && + git init sub && + ( + cd sub && + test_commit sub_file + ) && + git init main && + ( + cd main && + git submodule add ../sub && + test_commit main_file + ) +} + +test_expect_success 'stash push with submodule.recurse=true preserves dirty submodule worktree' ' + setup_basic && + ( + cd main && + git config submodule.recurse true && + echo "x" >main_file.t && + echo "y" >sub/sub_file.t && + git stash push && + test_must_fail git -C sub diff --quiet + ) +' + +test_expect_success 'stash push and pop with submodule.recurse=true preserves dirty submodule worktree' ' + setup_basic && + ( + cd main && + git config submodule.recurse true && + echo "x" >main_file.t && + echo "y" >sub/sub_file.t && + git stash push && + git stash pop && + test_must_fail git -C sub diff --quiet + ) +' + test_done diff --git a/t/t3907-stash-show-config.sh b/t/t3907-stash-show-config.sh new file mode 100755 index 0000000..10914bb --- /dev/null +++ b/t/t3907-stash-show-config.sh @@ -0,0 +1,83 @@ +#!/bin/sh + +test_description='Test git stash show configuration.' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit file +' + +# takes three parameters: +# 1. the stash.showStat value (or "<unset>") +# 2. the stash.showPatch value (or "<unset>") +# 3. the diff options of the expected output (or nothing for no output) +test_stat_and_patch () { + if test "<unset>" = "$1" + then + test_unconfig stash.showStat + else + test_config stash.showStat "$1" + fi && + + if test "<unset>" = "$2" + then + test_unconfig stash.showPatch + else + test_config stash.showPatch "$2" + fi && + + shift 2 && + echo 2 >file.t && + if test $# != 0 + then + git diff "$@" >expect + fi && + git stash && + git stash show >actual && + + if test $# = 0 + then + test_must_be_empty actual + else + test_cmp expect actual + fi +} + +test_expect_success 'showStat unset showPatch unset' ' + test_stat_and_patch "<unset>" "<unset>" --stat +' + +test_expect_success 'showStat unset showPatch false' ' + test_stat_and_patch "<unset>" false --stat +' + +test_expect_success 'showStat unset showPatch true' ' + test_stat_and_patch "<unset>" true --stat -p +' + +test_expect_success 'showStat false showPatch unset' ' + test_stat_and_patch false "<unset>" +' + +test_expect_success 'showStat false showPatch false' ' + test_stat_and_patch false false +' + +test_expect_success 'showStat false showPatch true' ' + test_stat_and_patch false true -p +' + +test_expect_success 'showStat true showPatch unset' ' + test_stat_and_patch true "<unset>" --stat +' + +test_expect_success 'showStat true showPatch false' ' + test_stat_and_patch true false --stat +' + +test_expect_success 'showStat true showPatch true' ' + test_stat_and_patch true true --stat -p +' + +test_done diff --git a/t/t3908-stash-in-worktree.sh b/t/t3908-stash-in-worktree.sh new file mode 100755 index 0000000..2b2b366 --- /dev/null +++ b/t/t3908-stash-in-worktree.sh @@ -0,0 +1,27 @@ +#!/bin/sh +# +# Copyright (c) 2019 Johannes E Schindelin +# + +test_description='Test git stash in a worktree' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit initial && + git worktree add wt && + test_commit -C wt in-worktree +' + +test_expect_success 'apply in subdirectory' ' + mkdir wt/subdir && + ( + cd wt/subdir && + echo modified >../initial.t && + git stash && + git stash apply >out + ) && + grep "\.\.\/initial\.t" wt/subdir/out +' + +test_done diff --git a/t/t3909-stash-pathspec-file.sh b/t/t3909-stash-pathspec-file.sh new file mode 100755 index 0000000..55e050c --- /dev/null +++ b/t/t3909-stash-pathspec-file.sh @@ -0,0 +1,100 @@ +#!/bin/sh + +test_description='stash --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + >fileA.t && + >fileB.t && + >fileC.t && + >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t && + git commit -m "Files" && + + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git stash show --name-status >actual && + test_cmp expect actual +} + +test_expect_success 'simplest' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileA.t + EOF + + echo fileA.t | git stash push --pathspec-from-file=- && + verify_expect +' + +test_expect_success '--pathspec-file-nul' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileA.t + M fileB.t + EOF + + printf "fileA.t\0fileB.t\0" | git stash push --pathspec-from-file=- --pathspec-file-nul && + verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + # More files are written to make sure that git didnt ignore + # --pathspec-from-file, stashing everything + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + + cat >expect <<-\EOF && + M fileB.t + M fileC.t + EOF + + printf "fileB.t\nfileC.t\n" | git stash push --pathspec-from-file=- && + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo A >fileA.t && + echo fileA.t >list && + + test_must_fail git stash push --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git stash push --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git stash push --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err +' + +test_done diff --git a/t/t4000-diff-format.sh b/t/t4000-diff-format.sh index 8de36b7..e5116a7 100755 --- a/t/t4000-diff-format.sh +++ b/t/t4000-diff-format.sh @@ -78,7 +78,7 @@ test_expect_success 'git diff-files --no-patch --patch shows the patch' ' test_expect_success 'git diff-files --no-patch --patch-with-raw shows the patch and raw data' ' git diff-files --no-patch --patch-with-raw >actual && - grep -q "^:100644 100755 .* 0000000000000000000000000000000000000000 M path0\$" actual && + grep -q "^:100644 100755 .* $ZERO_OID M path0\$" actual && tail -n +4 actual >actual-patch && compare_diff_patch expected actual-patch ' diff --git a/t/t4002-diff-basic.sh b/t/t4002-diff-basic.sh index 3a6c21e..cbcdd10 100755 --- a/t/t4002-diff-basic.sh +++ b/t/t4002-diff-basic.sh @@ -7,123 +7,272 @@ test_description='Test diff raw-output. ' . ./test-lib.sh + . "$TEST_DIRECTORY"/lib-read-tree-m-3way.sh -cat >.test-plain-OA <<\EOF -:000000 100644 0000000000000000000000000000000000000000 ccba72ad3888a3520b39efcf780b9ee64167535d A AA -:000000 100644 0000000000000000000000000000000000000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 A AN -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 040000 0000000000000000000000000000000000000000 6d50f65d3bdab91c63444294d38f08aeff328e42 A DF -:100644 000000 141c1f1642328e4bc46a7d801a71da392e66791e 0000000000000000000000000000000000000000 D DM -:100644 000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 0000000000000000000000000000000000000000 D DN -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 100644 03f24c8c4700babccfd28b654e7e8eac402ad6cd 103d9f89b50b9aad03054b579be5e7aa665f2d57 M MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 M MM -:100644 100644 bd084b0c27c7b6cc34f11d6d0509a29be3caf970 a716d58de4a570e0038f5c307bd8db34daea021f M MN -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 4c86f9a85fbc5e6804ee2e17a797538fbe785bca M TT -:040000 040000 7d670fdcdb9929f6c7dac196ff78689cd1c566a1 5e5f22072bb39f6e12cf663a57cb634c76eefb49 M Z +test_oid_init + +test_oid_cache <<\EOF +aa_1 sha1:ccba72ad3888a3520b39efcf780b9ee64167535d +aa_1 sha256:9febfbf18197819b2735c45291f138525d2476d59470f98239647544586ba403 + +aa_2 sha1:6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 +aa_2 sha256:6eaa3437de83f145a4aaa6ba355303075ade547b128ec6a2cd00a81ff7ce7a56 + +an_1 sha1:7e426fb079479fd67f6d81f984e4ec649a44bc25 +an_1 sha256:8f92a0bec99e399a38e3bd0e1bf19fbf121e0160efb29b857df79d439f1c4536 + +dd_1 sha1:bcc68ef997017466d5c9094bcf7692295f588c9a +dd_1 sha256:07e17428b00639b85485d2b01083d219e2f3e3ba8579e9ca44e9cc8dd554d952 + +df_1 sha1:6d50f65d3bdab91c63444294d38f08aeff328e42 +df_1 sha256:e367cecc27e9bf5451b1c65828cb21938d36a5f8e39c1b03ad6509cc36bb8e9d + +df_2 sha1:71420ab81e254145d26d6fc0cddee64c1acd4787 +df_2 sha256:0f0a86d10347ff6921d03a3c954679f3f1d14fa3d5cd82f57b32c09755f3a47d + +dfd1 sha1:68a6d8b91da11045cf4aa3a5ab9f2a781c701249 +dfd1 sha256:f3bd3265b02b6978ce86490d8ad026c573639c974b3de1d9faf30d8d5a77d3d5 + +dm_1 sha1:141c1f1642328e4bc46a7d801a71da392e66791e +dm_1 sha256:c89f8656e7b94e21ee5fbaf0e2149bbf783c51edbe2ce110349cac13059ee7ed + +dm_2 sha1:3c4d8de5fbad08572bab8e10eef8dbb264cf0231 +dm_2 sha256:83a572e37e0c94086294dae2cecc43d9131afd6f6c906e495c78972230b54988 + +dn_1 sha1:35abde1506ddf806572ff4d407bd06885d0f8ee9 +dn_1 sha256:775d5852582070e620be63327bfa515fab8f71c7ac3e4f0c3cd6267b4377ba28 + +ll_2 sha1:1d41122ebdd7a640f29d3c9cc4f9d70094374762 +ll_2 sha256:7917b4948a883cfed0a77d3d5a625dc8577d6ddcc3c6c3bbc56c4d4226a2246d + +md_1 sha1:03f24c8c4700babccfd28b654e7e8eac402ad6cd +md_1 sha256:fc9f30369b978595ad685ba11ca9a17de0af16d79cd4b629975f4f1590033902 + +md_2 sha1:103d9f89b50b9aad03054b579be5e7aa665f2d57 +md_2 sha256:fc78ec75275628762fe520479a6b2398dec295ce7aabcb1d15e5963c7b4e9317 + +mm_1 sha1:b258508afb7ceb449981bd9d63d2d3e971bf8d34 +mm_1 sha256:a4b7847d228e900e3000285e240c20fd96f9dd41ce1445305f6eada126d4a04a + +mm_2 sha1:b431b272d829ff3aa4d1a5085f4394ab4d3305b6 +mm_2 sha256:3f8b83ea36aacf689bcf1a1290a9a8ed341564d32682ea6f76fea9a979186782 + +mm_3 sha1:19989d4559aae417fedee240ccf2ba315ea4dc2b +mm_3 sha256:71b3bfc5747ac033fff9ea0ab39ee453a3af2969890e75d6ef547b87544e2681 + +mn_1 sha1:bd084b0c27c7b6cc34f11d6d0509a29be3caf970 +mn_1 sha256:47a67450583d7a329eb01a7c4ba644945af72c0ed2c7c95eb5a00d6e46d4d483 + +mn_2 sha1:a716d58de4a570e0038f5c307bd8db34daea021f +mn_2 sha256:f95104c1ebe27acb84bac25a7be98c71f6b8d3054b21f357a5be0c524ad97e08 + +nm_1 sha1:c8f25781e8f1792e3e40b74225e20553041b5226 +nm_1 sha256:09baddc7afaa62e62e152c23c9c3ab94bf15a3894031e227e9be7fe68e1f4e49 + +nm_2 sha1:cdb9a8c3da571502ac30225e9c17beccb8387983 +nm_2 sha256:58b5227956ac2d2a08d0efa513c0ae37430948b16791ea3869a1308dbf05536d + +na_1 sha1:15885881ea69115351c09b38371f0348a3fb8c67 +na_1 sha256:18e4fdd1670cd7968ee23d35bfd29e5418d56fb190c840094c1c57ceee0aad8f + +nd_1 sha1:a4e179e4291e5536a5e1c82e091052772d2c5a93 +nd_1 sha256:07dac9b01d00956ea0c65bd993d7de4864aeef2ed3cbb1255d9f1d949fcd6df6 + +ss_1 sha1:40c959f984c8b89a2b02520d17f00d717f024397 +ss_1 sha256:50fc1b5df74d9910db2f9270993484235f15b69b75b01bcfb53e059289d14af9 + +ss_2 sha1:2ac547ae9614a00d1b28275de608131f7a0e259f +ss_2 sha256:a90f02e6044f1497d13db587d22ab12f90150a7d1e084afcf96065fab35ae2bc + +tt_1 sha1:4ac13458899ab908ef3b1128fa378daefc88d356 +tt_1 sha256:c53113c7dd5060e86b5b251428bd058f6726f66273c6a24bff1c61a04f498dd3 + +tt_2 sha1:4c86f9a85fbc5e6804ee2e17a797538fbe785bca +tt_2 sha256:0775f2a296129a7cf2862b46bc0e88c14d593f2773a3e3fb1c5193db6f5a7e77 + +tt_3 sha1:c4e4a12231b9fa79a0053cb6077fcb21bb5b135a +tt_3 sha256:47860f93cdd211f96443e0560f21c57ab6c2f4b0ac27ff03651a352e53fe8484 + +z__1 sha1:7d670fdcdb9929f6c7dac196ff78689cd1c566a1 +z__1 sha256:44d0f37aff5e51cfcfdd1134c93a6419bcca7b9964f792ffcd5f9b4fcba1ee63 + +z__2 sha1:5e5f22072bb39f6e12cf663a57cb634c76eefb49 +z__2 sha256:d29de162113190fed104eb5f010820cef4e315f89b9326e8497f7219fb737894 + +z__3 sha1:1ba523955d5160681af65cb776411f574c1e8155 +z__3 sha256:07422d772b07794ab4369a5648e617719f89c2d2212cbeab05d97214b6471636 + +zaa1 sha1:8acb8e9750e3f644bf323fcf3d338849db106c77 +zaa1 sha256:e79b029282c8abec2d9f3f7faceaf2a1405e02d1f368e66450ae66cf5b68d1f4 + +zaa2 sha1:6c0b99286d0bce551ac4a7b3dff8b706edff3715 +zaa2 sha256:c82bd78c3e69ea1796e6b1a7a3ba45bb106c50e819296475b862123d3f5cc5a0 + +zan1 sha1:087494262084cefee7ed484d20c8dc0580791272 +zan1 sha256:4b159eb3804d05599023dd074f771d06d02870f4ab24a7165add8ac3d703b8d3 + +zdd1 sha1:879007efae624d2b1307214b24a956f0a8d686a8 +zdd1 sha256:eecfdd4d8092dd0363fb6d4548b54c6afc8982c3ed9b34e393f1d6a921d8eaa3 + +zdm1 sha1:9b541b2275c06e3a7b13f28badf5294e2ae63df4 +zdm1 sha256:ab136e88e19a843c4bf7713d2090d5a2186ba16a6a80dacc12eeddd256a8e556 + +zdm2 sha1:d77371d15817fcaa57eeec27f770c505ba974ec1 +zdm2 sha256:1c1a5f57363f46a15d95ce8527b3c2c158d88d16853b4acbf81bd20fd2c89a46 + +zdn1 sha1:beb5d38c55283d280685ea21a0e50cfcc0ca064a +zdn1 sha256:0f0eca66183617b0aa5ad74b256540329f841470922ca6760263c996d825eb18 + +zmd1 sha1:d41fda41b7ec4de46b43cb7ea42a45001ae393d5 +zmd1 sha256:1ed32d481852eddf31a0ce12652a0ad14bf5b7a842667b5dbb0b50f35bf1c80a + +zmd2 sha1:a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 +zmd2 sha256:b238da211b404f8917df2d9c6f7030535e904b2186131007a3c292ec6902f933 + +zmm1 sha1:4ca22bae2527d3d9e1676498a0fba3b355bd1278 +zmm1 sha256:072b1d85b5f34fabc99dfa46008c5418df68302d3e317430006f49b32d244226 + +zmm2 sha1:61422ba9c2c873416061a88cd40a59a35b576474 +zmm2 sha256:81dd5d2b3c5cda16fef552256aed4e2ea0802a8450a08f308a92142112ff6dda + +zmm3 sha1:697aad7715a1e7306ca76290a3dd4208fbaeddfa +zmm3 sha256:8b10fab49e9be3414aa5e9a93d0e46f9569053440138a7c19a5eb5536d8e95bf + +zmn1 sha1:b16d7b25b869f2beb124efa53467d8a1550ad694 +zmn1 sha256:609e4f75d1295e844c826feeba213acb0b6cfc609adfe8ff705b19e3829ae3e9 + +zmn2 sha1:a5c544c21cfcb07eb80a4d89a5b7d1570002edfd +zmn2 sha256:d6d03edf2dc1a3b267a8205de5f41a2ff4b03def8c7ae02052b543fb09d589fc + +zna1 sha1:d12979c22fff69c59ca9409e7a8fe3ee25eaee80 +zna1 sha256:b37b80e789e8ea32aa323f004628f02013f632124b0282c7fe00a127d3c64c3c + +znd1 sha1:a18393c636b98e9bd7296b8b437ea4992b72440c +znd1 sha256:af92a22eee8c38410a0c9d2b5135a10aeb052cbc7cf675541ed9a67bfcaf7cf9 + +znm1 sha1:3fdbe17fd013303a2e981e1ca1c6cd6e72789087 +znm1 sha256:f75aeaa0c11e76918e381c105f0752932c6150e941fec565d24fa31098a13dc1 + +znm2 sha1:7e09d6a3a14bd630913e8c75693cea32157b606d +znm2 sha256:938d73cfbaa1c902a84fb5b3afd9736aa0590367fb9bd59c6c4d072ce70fcd6d +EOF + +cat >.test-plain-OA <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_1) A AA +:000000 100644 $(test_oid zero) $(test_oid an_1) A AN +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 040000 $(test_oid zero) $(test_oid df_1) A DF +:100644 000000 $(test_oid dm_1) $(test_oid zero) D DM +:100644 000000 $(test_oid dn_1) $(test_oid zero) D DN +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 100644 $(test_oid md_1) $(test_oid md_2) M MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_2) M MM +:100644 100644 $(test_oid mn_1) $(test_oid mn_2) M MN +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_2) M TT +:040000 040000 $(test_oid z__1) $(test_oid z__2) M Z EOF -cat >.test-recursive-OA <<\EOF -:000000 100644 0000000000000000000000000000000000000000 ccba72ad3888a3520b39efcf780b9ee64167535d A AA -:000000 100644 0000000000000000000000000000000000000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 A AN -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 68a6d8b91da11045cf4aa3a5ab9f2a781c701249 A DF/DF -:100644 000000 141c1f1642328e4bc46a7d801a71da392e66791e 0000000000000000000000000000000000000000 D DM -:100644 000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 0000000000000000000000000000000000000000 D DN -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 100644 03f24c8c4700babccfd28b654e7e8eac402ad6cd 103d9f89b50b9aad03054b579be5e7aa665f2d57 M MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 M MM -:100644 100644 bd084b0c27c7b6cc34f11d6d0509a29be3caf970 a716d58de4a570e0038f5c307bd8db34daea021f M MN -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 4c86f9a85fbc5e6804ee2e17a797538fbe785bca M TT -:000000 100644 0000000000000000000000000000000000000000 8acb8e9750e3f644bf323fcf3d338849db106c77 A Z/AA -:000000 100644 0000000000000000000000000000000000000000 087494262084cefee7ed484d20c8dc0580791272 A Z/AN -:100644 000000 879007efae624d2b1307214b24a956f0a8d686a8 0000000000000000000000000000000000000000 D Z/DD -:100644 000000 9b541b2275c06e3a7b13f28badf5294e2ae63df4 0000000000000000000000000000000000000000 D Z/DM -:100644 000000 beb5d38c55283d280685ea21a0e50cfcc0ca064a 0000000000000000000000000000000000000000 D Z/DN -:100644 100644 d41fda41b7ec4de46b43cb7ea42a45001ae393d5 a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 M Z/MD -:100644 100644 4ca22bae2527d3d9e1676498a0fba3b355bd1278 61422ba9c2c873416061a88cd40a59a35b576474 M Z/MM -:100644 100644 b16d7b25b869f2beb124efa53467d8a1550ad694 a5c544c21cfcb07eb80a4d89a5b7d1570002edfd M Z/MN +cat >.test-recursive-OA <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_1) A AA +:000000 100644 $(test_oid zero) $(test_oid an_1) A AN +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid dfd1) A DF/DF +:100644 000000 $(test_oid dm_1) $(test_oid zero) D DM +:100644 000000 $(test_oid dn_1) $(test_oid zero) D DN +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 100644 $(test_oid md_1) $(test_oid md_2) M MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_2) M MM +:100644 100644 $(test_oid mn_1) $(test_oid mn_2) M MN +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_2) M TT +:000000 100644 $(test_oid zero) $(test_oid zaa1) A Z/AA +:000000 100644 $(test_oid zero) $(test_oid zan1) A Z/AN +:100644 000000 $(test_oid zdd1) $(test_oid zero) D Z/DD +:100644 000000 $(test_oid zdm1) $(test_oid zero) D Z/DM +:100644 000000 $(test_oid zdn1) $(test_oid zero) D Z/DN +:100644 100644 $(test_oid zmd1) $(test_oid zmd2) M Z/MD +:100644 100644 $(test_oid zmm1) $(test_oid zmm2) M Z/MM +:100644 100644 $(test_oid zmn1) $(test_oid zmn2) M Z/MN EOF -cat >.test-plain-OB <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 A AA -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 100644 141c1f1642328e4bc46a7d801a71da392e66791e 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 M DM -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 000000 03f24c8c4700babccfd28b654e7e8eac402ad6cd 0000000000000000000000000000000000000000 D MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:040000 040000 7d670fdcdb9929f6c7dac196ff78689cd1c566a1 1ba523955d5160681af65cb776411f574c1e8155 M Z +cat >.test-plain-OB <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_2) A AA +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 100644 $(test_oid dm_1) $(test_oid dm_2) M DM +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 000000 $(test_oid md_1) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_3) M MM +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_3) M TT +:040000 040000 $(test_oid z__1) $(test_oid z__3) M Z EOF -cat >.test-recursive-OB <<\EOF -:000000 100644 0000000000000000000000000000000000000000 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 A AA -:100644 000000 bcc68ef997017466d5c9094bcf7692295f588c9a 0000000000000000000000000000000000000000 D DD -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 100644 141c1f1642328e4bc46a7d801a71da392e66791e 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 M DM -:000000 100644 0000000000000000000000000000000000000000 1d41122ebdd7a640f29d3c9cc4f9d70094374762 A LL -:100644 000000 03f24c8c4700babccfd28b654e7e8eac402ad6cd 0000000000000000000000000000000000000000 D MD -:100644 100644 b258508afb7ceb449981bd9d63d2d3e971bf8d34 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 40c959f984c8b89a2b02520d17f00d717f024397 2ac547ae9614a00d1b28275de608131f7a0e259f M SS -:100644 100644 4ac13458899ab908ef3b1128fa378daefc88d356 c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:000000 100644 0000000000000000000000000000000000000000 6c0b99286d0bce551ac4a7b3dff8b706edff3715 A Z/AA -:100644 000000 879007efae624d2b1307214b24a956f0a8d686a8 0000000000000000000000000000000000000000 D Z/DD -:100644 100644 9b541b2275c06e3a7b13f28badf5294e2ae63df4 d77371d15817fcaa57eeec27f770c505ba974ec1 M Z/DM -:100644 000000 d41fda41b7ec4de46b43cb7ea42a45001ae393d5 0000000000000000000000000000000000000000 D Z/MD -:100644 100644 4ca22bae2527d3d9e1676498a0fba3b355bd1278 697aad7715a1e7306ca76290a3dd4208fbaeddfa M Z/MM -:000000 100644 0000000000000000000000000000000000000000 d12979c22fff69c59ca9409e7a8fe3ee25eaee80 A Z/NA -:100644 000000 a18393c636b98e9bd7296b8b437ea4992b72440c 0000000000000000000000000000000000000000 D Z/ND -:100644 100644 3fdbe17fd013303a2e981e1ca1c6cd6e72789087 7e09d6a3a14bd630913e8c75693cea32157b606d M Z/NM +cat >.test-recursive-OB <<EOF +:000000 100644 $(test_oid zero) $(test_oid aa_2) A AA +:100644 000000 $(test_oid dd_1) $(test_oid zero) D DD +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 100644 $(test_oid dm_1) $(test_oid dm_2) M DM +:000000 100644 $(test_oid zero) $(test_oid ll_2) A LL +:100644 000000 $(test_oid md_1) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_1) $(test_oid mm_3) M MM +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid ss_1) $(test_oid ss_2) M SS +:100644 100644 $(test_oid tt_1) $(test_oid tt_3) M TT +:000000 100644 $(test_oid zero) $(test_oid zaa2) A Z/AA +:100644 000000 $(test_oid zdd1) $(test_oid zero) D Z/DD +:100644 100644 $(test_oid zdm1) $(test_oid zdm2) M Z/DM +:100644 000000 $(test_oid zmd1) $(test_oid zero) D Z/MD +:100644 100644 $(test_oid zmm1) $(test_oid zmm3) M Z/MM +:000000 100644 $(test_oid zero) $(test_oid zna1) A Z/NA +:100644 000000 $(test_oid znd1) $(test_oid zero) D Z/ND +:100644 100644 $(test_oid znm1) $(test_oid znm2) M Z/NM EOF -cat >.test-plain-AB <<\EOF -:100644 100644 ccba72ad3888a3520b39efcf780b9ee64167535d 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 M AA -:100644 000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 0000000000000000000000000000000000000000 D AN -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:040000 000000 6d50f65d3bdab91c63444294d38f08aeff328e42 0000000000000000000000000000000000000000 D DF -:000000 100644 0000000000000000000000000000000000000000 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 A DM -:000000 100644 0000000000000000000000000000000000000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 A DN -:100644 000000 103d9f89b50b9aad03054b579be5e7aa665f2d57 0000000000000000000000000000000000000000 D MD -:100644 100644 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:100644 100644 a716d58de4a570e0038f5c307bd8db34daea021f bd084b0c27c7b6cc34f11d6d0509a29be3caf970 M MN -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 4c86f9a85fbc5e6804ee2e17a797538fbe785bca c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:040000 040000 5e5f22072bb39f6e12cf663a57cb634c76eefb49 1ba523955d5160681af65cb776411f574c1e8155 M Z +cat >.test-plain-AB <<EOF +:100644 100644 $(test_oid aa_1) $(test_oid aa_2) M AA +:100644 000000 $(test_oid an_1) $(test_oid zero) D AN +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:040000 000000 $(test_oid df_1) $(test_oid zero) D DF +:000000 100644 $(test_oid zero) $(test_oid dm_2) A DM +:000000 100644 $(test_oid zero) $(test_oid dn_1) A DN +:100644 000000 $(test_oid md_2) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_2) $(test_oid mm_3) M MM +:100644 100644 $(test_oid mn_2) $(test_oid mn_1) M MN +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid tt_2) $(test_oid tt_3) M TT +:040000 040000 $(test_oid z__2) $(test_oid z__3) M Z EOF -cat >.test-recursive-AB <<\EOF -:100644 100644 ccba72ad3888a3520b39efcf780b9ee64167535d 6aa2b5335b16431a0ef71e5c0a28be69183cf6a2 M AA -:100644 000000 7e426fb079479fd67f6d81f984e4ec649a44bc25 0000000000000000000000000000000000000000 D AN -:000000 100644 0000000000000000000000000000000000000000 71420ab81e254145d26d6fc0cddee64c1acd4787 A DF -:100644 000000 68a6d8b91da11045cf4aa3a5ab9f2a781c701249 0000000000000000000000000000000000000000 D DF/DF -:000000 100644 0000000000000000000000000000000000000000 3c4d8de5fbad08572bab8e10eef8dbb264cf0231 A DM -:000000 100644 0000000000000000000000000000000000000000 35abde1506ddf806572ff4d407bd06885d0f8ee9 A DN -:100644 000000 103d9f89b50b9aad03054b579be5e7aa665f2d57 0000000000000000000000000000000000000000 D MD -:100644 100644 b431b272d829ff3aa4d1a5085f4394ab4d3305b6 19989d4559aae417fedee240ccf2ba315ea4dc2b M MM -:100644 100644 a716d58de4a570e0038f5c307bd8db34daea021f bd084b0c27c7b6cc34f11d6d0509a29be3caf970 M MN -:000000 100644 0000000000000000000000000000000000000000 15885881ea69115351c09b38371f0348a3fb8c67 A NA -:100644 000000 a4e179e4291e5536a5e1c82e091052772d2c5a93 0000000000000000000000000000000000000000 D ND -:100644 100644 c8f25781e8f1792e3e40b74225e20553041b5226 cdb9a8c3da571502ac30225e9c17beccb8387983 M NM -:100644 100644 4c86f9a85fbc5e6804ee2e17a797538fbe785bca c4e4a12231b9fa79a0053cb6077fcb21bb5b135a M TT -:100644 100644 8acb8e9750e3f644bf323fcf3d338849db106c77 6c0b99286d0bce551ac4a7b3dff8b706edff3715 M Z/AA -:100644 000000 087494262084cefee7ed484d20c8dc0580791272 0000000000000000000000000000000000000000 D Z/AN -:000000 100644 0000000000000000000000000000000000000000 d77371d15817fcaa57eeec27f770c505ba974ec1 A Z/DM -:000000 100644 0000000000000000000000000000000000000000 beb5d38c55283d280685ea21a0e50cfcc0ca064a A Z/DN -:100644 000000 a79ac3be9377639e1c7d1edf1ae1b3a5f0ccd8a9 0000000000000000000000000000000000000000 D Z/MD -:100644 100644 61422ba9c2c873416061a88cd40a59a35b576474 697aad7715a1e7306ca76290a3dd4208fbaeddfa M Z/MM -:100644 100644 a5c544c21cfcb07eb80a4d89a5b7d1570002edfd b16d7b25b869f2beb124efa53467d8a1550ad694 M Z/MN -:000000 100644 0000000000000000000000000000000000000000 d12979c22fff69c59ca9409e7a8fe3ee25eaee80 A Z/NA -:100644 000000 a18393c636b98e9bd7296b8b437ea4992b72440c 0000000000000000000000000000000000000000 D Z/ND -:100644 100644 3fdbe17fd013303a2e981e1ca1c6cd6e72789087 7e09d6a3a14bd630913e8c75693cea32157b606d M Z/NM +cat >.test-recursive-AB <<EOF +:100644 100644 $(test_oid aa_1) $(test_oid aa_2) M AA +:100644 000000 $(test_oid an_1) $(test_oid zero) D AN +:000000 100644 $(test_oid zero) $(test_oid df_2) A DF +:100644 000000 $(test_oid dfd1) $(test_oid zero) D DF/DF +:000000 100644 $(test_oid zero) $(test_oid dm_2) A DM +:000000 100644 $(test_oid zero) $(test_oid dn_1) A DN +:100644 000000 $(test_oid md_2) $(test_oid zero) D MD +:100644 100644 $(test_oid mm_2) $(test_oid mm_3) M MM +:100644 100644 $(test_oid mn_2) $(test_oid mn_1) M MN +:000000 100644 $(test_oid zero) $(test_oid na_1) A NA +:100644 000000 $(test_oid nd_1) $(test_oid zero) D ND +:100644 100644 $(test_oid nm_1) $(test_oid nm_2) M NM +:100644 100644 $(test_oid tt_2) $(test_oid tt_3) M TT +:100644 100644 $(test_oid zaa1) $(test_oid zaa2) M Z/AA +:100644 000000 $(test_oid zan1) $(test_oid zero) D Z/AN +:000000 100644 $(test_oid zero) $(test_oid zdm2) A Z/DM +:000000 100644 $(test_oid zero) $(test_oid zdn1) A Z/DN +:100644 000000 $(test_oid zmd2) $(test_oid zero) D Z/MD +:100644 100644 $(test_oid zmm2) $(test_oid zmm3) M Z/MM +:100644 100644 $(test_oid zmn2) $(test_oid zmn1) M Z/MN +:000000 100644 $(test_oid zero) $(test_oid zna1) A Z/NA +:100644 000000 $(test_oid znd1) $(test_oid zero) D Z/ND +:100644 100644 $(test_oid znm1) $(test_oid znm2) M Z/NM EOF cmp_diff_files_output () { diff --git a/t/t4006-diff-mode.sh b/t/t4006-diff-mode.sh index a8e01ec..03489af 100755 --- a/t/t4006-diff-mode.sh +++ b/t/t4006-diff-mode.sh @@ -32,28 +32,37 @@ test_expect_success 'prepare binary file' ' git commit -m binbin ' -# test_expect_success '--stat output after text chmod' ' -# test_chmod -x rezrov && -# echo " 0 files changed" >expect && -# git diff HEAD --stat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--shortstat output after text chmod' ' -# git diff HEAD --shortstat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--stat output after binary chmod' ' -# test_chmod +x binbin && -# echo " 0 files changed" >expect && -# git diff HEAD --stat >actual && -# test_i18ncmp expect actual -# ' -# -# test_expect_success '--shortstat output after binary chmod' ' -# git diff HEAD --shortstat >actual && -# test_i18ncmp expect actual -# ' +test_expect_success '--stat output after text chmod' ' + test_chmod -x rezrov && + cat >expect <<-\EOF && + rezrov | 0 + 1 file changed, 0 insertions(+), 0 deletions(-) + EOF + git diff HEAD --stat >actual && + test_i18ncmp expect actual +' + +test_expect_success '--shortstat output after text chmod' ' + tail -n 1 <expect >expect.short && + git diff HEAD --shortstat >actual && + test_i18ncmp expect.short actual +' + +test_expect_success '--stat output after binary chmod' ' + test_chmod +x binbin && + cat >expect <<-EOF && + binbin | Bin + rezrov | 0 + 2 files changed, 0 insertions(+), 0 deletions(-) + EOF + git diff HEAD --stat >actual && + test_i18ncmp expect actual +' + +test_expect_success '--shortstat output after binary chmod' ' + tail -n 1 <expect >expect.short && + git diff HEAD --shortstat >actual && + test_i18ncmp expect.short actual +' test_done diff --git a/t/t4009-diff-rename-4.sh b/t/t4009-diff-rename-4.sh index 3641fd8..b63bdf0 100755 --- a/t/t4009-diff-rename-4.sh +++ b/t/t4009-diff-rename-4.sh @@ -14,6 +14,7 @@ test_expect_success \ 'cat "$TEST_DIRECTORY"/diff-lib/COPYING >COPYING && echo frotz >rezrov && git update-index --add COPYING rezrov && + orig=$(git hash-object COPYING) && tree=$(git write-tree) && echo $tree' @@ -22,6 +23,8 @@ test_expect_success \ 'sed -e 's/HOWEVER/However/' <COPYING >COPYING.1 && sed -e 's/GPL/G.P.L/g' <COPYING >COPYING.2 && rm -f COPYING && + c1=$(git hash-object COPYING.1) && + c2=$(git hash-object COPYING.2) && git update-index --add --remove COPYING COPYING.?' # tree has COPYING and rezrov. work tree has COPYING.1 and COPYING.2, @@ -31,11 +34,11 @@ test_expect_success \ git diff-index -z -C $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +cat >expected <<EOF +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 06c67961bbaed34a127f76d261f4c0bf73eda471 R1234 +:100644 100644 $orig $c2 R1234 COPYING COPYING.2 EOF @@ -57,10 +60,10 @@ test_expect_success \ # about rezrov. git diff-index -z -C $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 06c67961bbaed34a127f76d261f4c0bf73eda471 M +cat >expected <<EOF +:100644 100644 $orig $c2 M COPYING -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 EOF @@ -82,8 +85,8 @@ test_expect_success \ git update-index --add --remove COPYING COPYING.1' git diff-index -z -C --find-copies-harder $tree >current -cat >expected <<\EOF -:100644 100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0603b3238a076dc6c8022aedc6648fa523a17178 C1234 +cat >expected <<EOF +:100644 100644 $orig $c1 C1234 COPYING COPYING.1 EOF diff --git a/t/t4010-diff-pathspec.sh b/t/t4010-diff-pathspec.sh index 281f8fa..e5ca359 100755 --- a/t/t4010-diff-pathspec.sh +++ b/t/t4010-diff-pathspec.sh @@ -17,11 +17,15 @@ test_expect_success \ 'echo frotz >file0 && mkdir path1 && echo rezrov >path1/file1 && + before0=$(git hash-object file0) && + before1=$(git hash-object path1/file1) && git update-index --add file0 path1/file1 && tree=$(git write-tree) && echo "$tree" && echo nitfol >file0 && echo yomin >path1/file1 && + after0=$(git hash-object file0) && + after1=$(git hash-object path1/file1) && git update-index file0 path1/file1' cat >expected <<\EOF @@ -31,32 +35,32 @@ test_expect_success \ 'git diff-index --cached $tree -- path >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ 'limit to path1 should show path1/file1' \ 'git diff-index --cached $tree -- path1 >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ 'limit to path1/ should show path1/file1' \ 'git diff-index --cached $tree -- path1/ >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 766498d93a4b06057a8e49d23f4068f1170ff38f 0a41e115ab61be0328a19b29f18cdcb49338d516 M path1/file1 +cat >expected <<EOF +:100644 100644 $before1 $after1 M path1/file1 EOF test_expect_success \ '"*file1" should show path1/file1' \ 'git diff-index --cached $tree -- "*file1" >current && compare_diff_raw current expected' -cat >expected <<\EOF -:100644 100644 8e4020bb5a8d8c873b25de15933e75cc0fc275df dca6b92303befc93086aa025d90a5facd7eb2812 M file0 +cat >expected <<EOF +:100644 100644 $before0 $after0 M file0 EOF test_expect_success \ 'limit to file0 should show file0' \ diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 5ae19b9..717034b 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -9,11 +9,24 @@ test_description='Test diff of symlinks. . ./test-lib.sh . "$TEST_DIRECTORY"/diff-lib.sh +# Print the short OID of a symlink with the given name. +symlink_oid () { + local oid=$(printf "%s" "$1" | git hash-object --stdin) && + git rev-parse --short "$oid" +} + +# Print the short OID of the given file. +short_oid () { + local oid=$(git hash-object "$1") && + git rev-parse --short "$oid" +} + test_expect_success 'diff new symlink and file' ' - cat >expected <<-\EOF && + symlink=$(symlink_oid xyzzy) && + cat >expected <<-EOF && diff --git a/frotz b/frotz new file mode 120000 - index 0000000..7c465af + index 0000000..$symlink --- /dev/null +++ b/frotz @@ -0,0 +1 @@ @@ -21,7 +34,7 @@ test_expect_success 'diff new symlink and file' ' \ No newline at end of file diff --git a/nitfol b/nitfol new file mode 100644 - index 0000000..7c465af + index 0000000..$symlink --- /dev/null +++ b/nitfol @@ -0,0 +1 @@ @@ -46,10 +59,10 @@ test_expect_success 'diff unchanged symlink and file' ' ' test_expect_success 'diff removed symlink and file' ' - cat >expected <<-\EOF && + cat >expected <<-EOF && diff --git a/frotz b/frotz deleted file mode 120000 - index 7c465af..0000000 + index $symlink..0000000 --- a/frotz +++ /dev/null @@ -1 +0,0 @@ @@ -57,7 +70,7 @@ test_expect_success 'diff removed symlink and file' ' \ No newline at end of file diff --git a/nitfol b/nitfol deleted file mode 100644 - index 7c465af..0000000 + index $symlink..0000000 --- a/nitfol +++ /dev/null @@ -1 +0,0 @@ @@ -90,9 +103,10 @@ test_expect_success 'diff identical, but newly created symlink and file' ' ' test_expect_success 'diff different symlink and file' ' - cat >expected <<-\EOF && + new=$(symlink_oid yxyyz) && + cat >expected <<-EOF && diff --git a/frotz b/frotz - index 7c465af..df1db54 120000 + index $symlink..$new 120000 --- a/frotz +++ b/frotz @@ -1 +1 @@ @@ -101,7 +115,7 @@ test_expect_success 'diff different symlink and file' ' +yxyyz \ No newline at end of file diff --git a/nitfol b/nitfol - index 7c465af..df1db54 100644 + index $symlink..$new 100644 --- a/nitfol +++ b/nitfol @@ -1 +1 @@ @@ -137,14 +151,16 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' - cat >expect <<-\EOF && + file=$(short_oid file.bin) && + link=$(symlink_oid file.bin) && + cat >expect <<-EOF && diff --git a/file.bin b/file.bin new file mode 100644 - index 0000000..d95f3ad + index 0000000..$file Binary files /dev/null and b/file.bin differ diff --git a/link.bin b/link.bin new file mode 120000 - index 0000000..dce41ec + index 0000000..$link --- /dev/null +++ b/link.bin @@ -0,0 +1 @@ diff --git a/t/t4013-diff-various.sh b/t/t4013-diff-various.sh index 7d985ff..dde3f11 100755 --- a/t/t4013-diff-various.sh +++ b/t/t4013-diff-various.sh @@ -7,9 +7,6 @@ test_description='Various diff formatting options' . ./test-lib.sh -LF=' -' - test_expect_success setup ' GIT_AUTHOR_DATE="2006-06-26 00:00:00 +0000" && @@ -98,6 +95,12 @@ test_expect_success setup ' git commit -m "update mode" && git checkout -f master && + # Same merge as master, but with parents reversed. Hide it in a + # pseudo-ref to avoid impacting tests with --all. + commit=$(echo reverse | + git commit-tree -p master^2 -p master^1 master^{tree}) && + git update-ref REVERSE $commit && + git config diff.renames false && git show-branch @@ -117,6 +120,30 @@ test_expect_success setup ' +*++ [initial] Initial EOF +process_diffs () { + _x04="[0-9a-f][0-9a-f][0-9a-f][0-9a-f]" && + _x07="$_x05[0-9a-f][0-9a-f]" && + sed -e "s/$OID_REGEX/$ZERO_OID/g" \ + -e "s/From $_x40 /From $ZERO_OID /" \ + -e "s/from $_x40)/from $ZERO_OID)/" \ + -e "s/commit $_x40\$/commit $ZERO_OID/" \ + -e "s/commit $_x40 (/commit $ZERO_OID (/" \ + -e "s/$_x40 $_x40 $_x40/$ZERO_OID $ZERO_OID $ZERO_OID/" \ + -e "s/$_x40 $_x40 /$ZERO_OID $ZERO_OID /" \ + -e "s/^$_x40 $_x40$/$ZERO_OID $ZERO_OID/" \ + -e "s/^$_x40 /$ZERO_OID /" \ + -e "s/^$_x40$/$ZERO_OID/" \ + -e "s/$_x07\.\.$_x07/fffffff..fffffff/g" \ + -e "s/$_x07,$_x07\.\.$_x07/fffffff,fffffff..fffffff/g" \ + -e "s/$_x07 $_x07 $_x07/fffffff fffffff fffffff/g" \ + -e "s/$_x07 $_x07 /fffffff fffffff /g" \ + -e "s/Merge: $_x07 $_x07/Merge: fffffff fffffff/g" \ + -e "s/$_x07\.\.\./fffffff.../g" \ + -e "s/ $_x04\.\.\./ ffff.../g" \ + -e "s/ $_x04/ ffff/g" \ + "$1" +} + V=$(git version | sed -e 's/^git version //' -e 's/\./\\./g') while read magic cmd do @@ -155,13 +182,15 @@ do } >"$actual" && if test -f "$expect" then + process_diffs "$actual" >actual && + process_diffs "$expect" >expect && case $cmd in *format-patch* | *-stat*) - test_i18ncmp "$expect" "$actual";; + test_i18ncmp expect actual;; *) - test_cmp "$expect" "$actual";; + test_cmp expect actual;; esac && - rm -f "$actual" + rm -f "$actual" actual expect else # this is to help developing new tests. cp "$actual" "$expect" @@ -239,6 +268,8 @@ diff-tree --cc --stat --summary master # stat summary should show the diffstat and summary with the first parent diff-tree -c --stat --summary side diff-tree --cc --stat --summary side +diff-tree --cc --shortstat master +diff-tree --cc --summary REVERSE # improved by Timo's patch diff-tree --cc --patch-with-stat master # improved by Timo's patch @@ -330,6 +361,8 @@ format-patch --inline --stdout initial..master^^ format-patch --stdout --cover-letter -n initial..master^ diff --abbrev initial..side +diff -U initial..side +diff -U1 initial..side diff -r initial..side diff --stat initial..side diff -r --stat initial..side @@ -350,6 +383,7 @@ diff --line-prefix=abc master master^ side diff --dirstat master~1 master~2 diff --dirstat initial rearrange diff --dirstat-by-file initial rearrange +diff --dirstat --cc master~1 master # No-index --abbrev and --no-abbrev diff --raw initial :noellipses diff --raw initial @@ -375,16 +409,22 @@ test_expect_success 'log -S requires an argument' ' test_expect_success 'diff --cached on unborn branch' ' echo ref: refs/heads/unborn >.git/HEAD && git diff --cached >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--cached" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--cached" >expected && + test_cmp expected actual ' test_expect_success 'diff --cached -- file on unborn branch' ' git diff --cached -- file0 >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--cached_--_file0" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--cached_--_file0" >expected && + test_cmp expected actual ' test_expect_success 'diff --line-prefix with spaces' ' git diff --line-prefix="| | | " --cached -- file0 >result && - test_cmp "$TEST_DIRECTORY/t4013/diff.diff_--line-prefix_--cached_--_file0" result + process_diffs result >actual && + process_diffs "$TEST_DIRECTORY/t4013/diff.diff_--line-prefix_--cached_--_file0" >expected && + test_cmp expected actual ' test_expect_success 'diff-tree --stdin with log formatting' ' diff --git a/t/t4013/diff.diff-tree_--cc_--shortstat_master b/t/t4013/diff.diff-tree_--cc_--shortstat_master new file mode 100644 index 0000000..a4ca42d --- /dev/null +++ b/t/t4013/diff.diff-tree_--cc_--shortstat_master @@ -0,0 +1,4 @@ +$ git diff-tree --cc --shortstat master +59d314ad6f356dd08601a4cd5e530381da3e3c64 + 2 files changed, 5 insertions(+) +$ diff --git a/t/t4013/diff.diff-tree_--cc_--summary_REVERSE b/t/t4013/diff.diff-tree_--cc_--summary_REVERSE new file mode 100644 index 0000000..e208dd5 --- /dev/null +++ b/t/t4013/diff.diff-tree_--cc_--summary_REVERSE @@ -0,0 +1,6 @@ +$ git diff-tree --cc --summary REVERSE +2562325a7ee916efb2481da93073b82cec801cbc + create mode 100644 file1 + delete mode 100644 file2 + delete mode 100644 file3 +$ diff --git a/t/t4013/diff.diff_--dirstat_--cc_master~1_master b/t/t4013/diff.diff_--dirstat_--cc_master~1_master new file mode 100644 index 0000000..fba4e34 --- /dev/null +++ b/t/t4013/diff.diff_--dirstat_--cc_master~1_master @@ -0,0 +1,3 @@ +$ git diff --dirstat --cc master~1 master + 40.0% dir/ +$ diff --git a/t/t4013/diff.diff_-U1_initial..side b/t/t4013/diff.diff_-U1_initial..side new file mode 100644 index 0000000..b69f8f0 --- /dev/null +++ b/t/t4013/diff.diff_-U1_initial..side @@ -0,0 +1,29 @@ +$ git diff -U1 initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -2 +2,3 @@ A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -3 +3,4 @@ + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.diff_-U2_initial..side b/t/t4013/diff.diff_-U2_initial..side new file mode 100644 index 0000000..8ffe04f --- /dev/null +++ b/t/t4013/diff.diff_-U2_initial..side @@ -0,0 +1,31 @@ +$ git diff -U2 initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -2,2 +2,5 @@ + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4013/diff.diff_-U_initial..side b/t/t4013/diff.diff_-U_initial..side new file mode 100644 index 0000000..c66c0dd --- /dev/null +++ b/t/t4013/diff.diff_-U_initial..side @@ -0,0 +1,32 @@ +$ git diff -U initial..side +diff --git a/dir/sub b/dir/sub +index 35d242b..7289e35 100644 +--- a/dir/sub ++++ b/dir/sub +@@ -1,2 +1,4 @@ + A + B ++1 ++2 +diff --git a/file0 b/file0 +index 01e79c3..f4615da 100644 +--- a/file0 ++++ b/file0 +@@ -1,3 +1,6 @@ + 1 + 2 + 3 ++A ++B ++C +diff --git a/file3 b/file3 +new file mode 100644 +index 0000000..7289e35 +--- /dev/null ++++ b/file3 +@@ -0,0 +1,4 @@ ++A ++B ++1 ++2 +$ diff --git a/t/t4014-format-patch.sh b/t/t4014-format-patch.sh index 909c743..b653dd7 100755 --- a/t/t4014-format-patch.sh +++ b/t/t4014-format-patch.sh @@ -9,7 +9,6 @@ test_description='various format-patch tests' . "$TEST_DIRECTORY"/lib-terminal.sh test_expect_success setup ' - for i in 1 2 3 4 5 6 7 8 9 10; do echo "$i"; done >file && cat file >elif && git add file elif && @@ -34,39 +33,54 @@ test_expect_success setup ' git commit -m "Side changes #3 with \\n backslash-n in it." && git checkout master && - git diff-tree -p C2 | git apply --index && + git diff-tree -p C2 >patch && + git apply --index <patch && test_tick && - git commit -m "Master accepts moral equivalent of #2" + git commit -m "Master accepts moral equivalent of #2" && -' + git checkout side && + git checkout -b patchid && + for i in 5 6 1 2 3 A 4 B C 7 8 9 10 D E F; do echo "$i"; done >file2 && + for i in 1 2 3 A 4 B C 7 8 9 10 D E F 5 6; do echo "$i"; done >file3 && + for i in 8 9 10; do echo "$i"; done >file && + git add file file2 file3 && + test_tick && + git commit -m "patchid 1" && + for i in 4 A B 7 8 9 10; do echo "$i"; done >file2 && + for i in 8 9 10 5 6; do echo "$i"; done >file3 && + git add file2 file3 && + test_tick && + git commit -m "patchid 2" && + for i in 10 5 6; do echo "$i"; done >file && + git add file && + test_tick && + git commit -m "patchid 3" && -test_expect_success "format-patch --ignore-if-in-upstream" ' + git checkout master +' +test_expect_success 'format-patch --ignore-if-in-upstream' ' git format-patch --stdout master..side >patch0 && - cnt=$(grep "^From " patch0 | wc -l) && - test $cnt = 3 - + grep "^From " patch0 >from0 && + test_line_count = 3 from0 ' -test_expect_success "format-patch --ignore-if-in-upstream" ' - +test_expect_success 'format-patch --ignore-if-in-upstream' ' git format-patch --stdout \ --ignore-if-in-upstream master..side >patch1 && - cnt=$(grep "^From " patch1 | wc -l) && - test $cnt = 2 - + grep "^From " patch1 >from1 && + test_line_count = 2 from1 ' -test_expect_success "format-patch --ignore-if-in-upstream handles tags" ' +test_expect_success 'format-patch --ignore-if-in-upstream handles tags' ' git tag -a v1 -m tag side && git tag -a v2 -m tag master && git format-patch --stdout --ignore-if-in-upstream v2..v1 >patch1 && - cnt=$(grep "^From " patch1 | wc -l) && - test $cnt = 2 + grep "^From " patch1 >from1 && + test_line_count = 2 from1 ' test_expect_success "format-patch doesn't consider merge commits" ' - git checkout -b slave master && echo "Another line" >>file && test_tick && @@ -77,148 +91,138 @@ test_expect_success "format-patch doesn't consider merge commits" ' git checkout -b merger master && test_tick && git merge --no-ff slave && - cnt=$(git format-patch -3 --stdout | grep "^From " | wc -l) && - test $cnt = 3 + git format-patch -3 --stdout >patch && + grep "^From " patch >from && + test_line_count = 3 from ' -test_expect_success "format-patch result applies" ' - +test_expect_success 'format-patch result applies' ' git checkout -b rebuild-0 master && git am -3 patch0 && - cnt=$(git rev-list master.. | wc -l) && - test $cnt = 2 + git rev-list master.. >list && + test_line_count = 2 list ' -test_expect_success "format-patch --ignore-if-in-upstream result applies" ' - +test_expect_success 'format-patch --ignore-if-in-upstream result applies' ' git checkout -b rebuild-1 master && git am -3 patch1 && - cnt=$(git rev-list master.. | wc -l) && - test $cnt = 2 + git rev-list master.. >list && + test_line_count = 2 list ' test_expect_success 'commit did not screw up the log message' ' - - git cat-file commit side | grep "^Side .* with .* backslash-n" - + git cat-file commit side >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'format-patch did not screw up the log message' ' - grep "^Subject: .*Side changes #3 with .* backslash-n" patch0 && grep "^Subject: .*Side changes #3 with .* backslash-n" patch1 - ' test_expect_success 'replay did not screw up the log message' ' - - git cat-file commit rebuild-1 | grep "^Side .* with .* backslash-n" - + git cat-file commit rebuild-1 >actual && + grep "^Side .* with .* backslash-n" actual ' test_expect_success 'extra headers' ' - git config format.headers "To: R E Cipient <rcipient@example.com> " && git config --add format.headers "Cc: S E Cipient <scipient@example.com> " && - git format-patch --stdout master..side > patch2 && - sed -e "/^\$/q" patch2 > hdrs2 && + git format-patch --stdout master..side >patch2 && + sed -e "/^\$/q" patch2 >hdrs2 && grep "^To: R E Cipient <rcipient@example.com>\$" hdrs2 && grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs2 - ' test_expect_success 'extra headers without newlines' ' - git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" && git config --add format.headers "Cc: S E Cipient <scipient@example.com>" && git format-patch --stdout master..side >patch3 && - sed -e "/^\$/q" patch3 > hdrs3 && + sed -e "/^\$/q" patch3 >hdrs3 && grep "^To: R E Cipient <rcipient@example.com>\$" hdrs3 && grep "^Cc: S E Cipient <scipient@example.com>\$" hdrs3 - ' test_expect_success 'extra headers with multiple To:s' ' - git config --replace-all format.headers "To: R E Cipient <rcipient@example.com>" && git config --add format.headers "To: S E Cipient <scipient@example.com>" && - git format-patch --stdout master..side > patch4 && - sed -e "/^\$/q" patch4 > hdrs4 && + git format-patch --stdout master..side >patch4 && + sed -e "/^\$/q" patch4 >hdrs4 && grep "^To: R E Cipient <rcipient@example.com>,\$" hdrs4 && grep "^ *S E Cipient <scipient@example.com>\$" hdrs4 ' test_expect_success 'additional command line cc (ascii)' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *S E Cipient <scipient@example.com>\$" patch5 + git format-patch --cc="S E Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs5 ' test_expect_failure 'additional command line cc (rfc822)' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch5 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch5 && - grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" patch5 + git format-patch --cc="S. E. Cipient <scipient@example.com>" --stdout master..side >patch5 && + sed -e "/^\$/q" patch5 >hdrs5 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs5 && + grep "^ *\"S. E. Cipient\" <scipient@example.com>\$" hdrs5 ' test_expect_success 'command line headers' ' - git config --unset-all format.headers && - git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch6 && - grep "^Cc: R E Cipient <rcipient@example.com>\$" patch6 + git format-patch --add-header="Cc: R E Cipient <rcipient@example.com>" --stdout master..side >patch6 && + sed -e "/^\$/q" patch6 >hdrs6 && + grep "^Cc: R E Cipient <rcipient@example.com>\$" hdrs6 ' test_expect_success 'configuration headers and command line headers' ' - git config --replace-all format.headers "Cc: R E Cipient <rcipient@example.com>" && - git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch7 && - grep "^Cc: R E Cipient <rcipient@example.com>,\$" patch7 && - grep "^ *S E Cipient <scipient@example.com>\$" patch7 + git format-patch --add-header="Cc: S E Cipient <scipient@example.com>" --stdout master..side >patch7 && + sed -e "/^\$/q" patch7 >hdrs7 && + grep "^Cc: R E Cipient <rcipient@example.com>,\$" hdrs7 && + grep "^ *S E Cipient <scipient@example.com>\$" hdrs7 ' test_expect_success 'command line To: header (ascii)' ' - git config --unset-all format.headers && - git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch8 + git format-patch --to="R E Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc822)' ' - - git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch8 + git format-patch --to="R. E. Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs8 ' test_expect_failure 'command line To: header (rfc2047)' ' - - git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side | sed -e "/^\$/q" >patch8 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch8 + git format-patch --to="R Ä Cipient <rcipient@example.com>" --stdout master..side >patch8 && + sed -e "/^\$/q" patch8 >hdrs8 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs8 ' test_expect_success 'configuration To: header (ascii)' ' - git config format.to "R E Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: R E Cipient <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: R E Cipient <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc822)' ' - git config format.to "R. E. Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: \"R. E. Cipient\" <rcipient@example.com>\$" hdrs9 ' test_expect_failure 'configuration To: header (rfc2047)' ' - git config format.to "R Ä Cipient <rcipient@example.com>" && - git format-patch --stdout master..side | sed -e "/^\$/q" >patch9 && - grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" patch9 + git format-patch --stdout master..side >patch9 && + sed -e "/^\$/q" patch9 >hdrs9 && + grep "^To: =?UTF-8?q?R=20=C3=84=20Cipient?= <rcipient@example.com>\$" hdrs9 ' # check_patch <patch>: Verify that <patch> looks like a half-sane @@ -230,89 +234,79 @@ check_patch () { } test_expect_success 'format.from=false' ' - - git -c format.from=false format-patch --stdout master..side | - sed -e "/^\$/q" >patch && + git -c format.from=false format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && check_patch patch && - ! grep "^From: C O Mitter <committer@example.com>\$" patch + ! grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from=true' ' - - git -c format.from=true format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: C O Mitter <committer@example.com>\$" patch + git -c format.from=true format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: C O Mitter <committer@example.com>\$" hdrs ' test_expect_success 'format.from with address' ' - - git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-from overrides format.from' ' - - git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --no-from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--from overrides format.from' ' - - git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side | - sed -e "/^\$/q" >patch && - check_patch patch && - ! grep "^From: F R Om <from@example.com>\$" patch + git -c format.from="F R Om <from@example.com>" format-patch --from --stdout master..side >patch && + sed -e "/^\$/q" patch >hdrs && + check_patch hdrs && + ! grep "^From: F R Om <from@example.com>\$" hdrs ' test_expect_success '--no-to overrides config.to' ' - git config --replace-all format.to \ "R E Cipient <rcipient@example.com>" && - git format-patch --no-to --stdout master..side | - sed -e "/^\$/q" >patch10 && - check_patch patch10 && - ! grep "^To: R E Cipient <rcipient@example.com>\$" patch10 + git format-patch --no-to --stdout master..side >patch10 && + sed -e "/^\$/q" patch10 >hdrs10 && + check_patch hdrs10 && + ! grep "^To: R E Cipient <rcipient@example.com>\$" hdrs10 ' test_expect_success '--no-to and --to replaces config.to' ' - git config --replace-all format.to \ "Someone <someone@out.there>" && git format-patch --no-to --to="Someone Else <else@out.there>" \ - --stdout master..side | - sed -e "/^\$/q" >patch11 && - check_patch patch11 && - ! grep "^To: Someone <someone@out.there>\$" patch11 && - grep "^To: Someone Else <else@out.there>\$" patch11 + --stdout master..side >patch11 && + sed -e "/^\$/q" patch11 >hdrs11 && + check_patch hdrs11 && + ! grep "^To: Someone <someone@out.there>\$" hdrs11 && + grep "^To: Someone Else <else@out.there>\$" hdrs11 ' test_expect_success '--no-cc overrides config.cc' ' - git config --replace-all format.cc \ "C E Cipient <rcipient@example.com>" && - git format-patch --no-cc --stdout master..side | - sed -e "/^\$/q" >patch12 && - check_patch patch12 && - ! grep "^Cc: C E Cipient <rcipient@example.com>\$" patch12 + git format-patch --no-cc --stdout master..side >patch12 && + sed -e "/^\$/q" patch12 >hdrs12 && + check_patch hdrs12 && + ! grep "^Cc: C E Cipient <rcipient@example.com>\$" hdrs12 ' test_expect_success '--no-add-header overrides config.headers' ' - git config --replace-all format.headers \ "Header1: B E Cipient <rcipient@example.com>" && - git format-patch --no-add-header --stdout master..side | - sed -e "/^\$/q" >patch13 && - check_patch patch13 && - ! grep "^Header1: B E Cipient <rcipient@example.com>\$" patch13 + git format-patch --no-add-header --stdout master..side >patch13 && + sed -e "/^\$/q" patch13 >hdrs13 && + check_patch hdrs13 && + ! grep "^Header1: B E Cipient <rcipient@example.com>\$" hdrs13 ' test_expect_success 'multiple files' ' - rm -rf patches/ && git checkout side && git format-patch -o patches/ master && @@ -338,7 +332,7 @@ test_expect_success 'reroll count (-v)' ' check_threading () { expect="$1" && shift && - (git format-patch --stdout "$@"; echo $? > status.out) | + git format-patch --stdout "$@" >patch && # Prints everything between the Message-ID and In-Reply-To, # and replaces all Message-ID-lookalikes by a sequence number perl -ne ' @@ -353,12 +347,11 @@ check_threading () { print; } print "---\n" if /^From /i; - ' > actual && - test 0 = "$(cat status.out)" && + ' <patch >actual && test_cmp "$expect" actual } -cat >> expect.no-threading <<EOF +cat >>expect.no-threading <<EOF --- --- --- @@ -369,7 +362,7 @@ test_expect_success 'no threading' ' check_threading expect.no-threading master ' -cat > expect.thread <<EOF +cat >expect.thread <<EOF --- Message-Id: <0> --- @@ -386,7 +379,7 @@ test_expect_success 'thread' ' check_threading expect.thread --thread master ' -cat > expect.in-reply-to <<EOF +cat >expect.in-reply-to <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -406,7 +399,7 @@ test_expect_success 'thread in-reply-to' ' --thread master ' -cat > expect.cover-letter <<EOF +cat >expect.cover-letter <<EOF --- Message-Id: <0> --- @@ -427,7 +420,7 @@ test_expect_success 'thread cover-letter' ' check_threading expect.cover-letter --cover-letter --thread master ' -cat > expect.cl-irt <<EOF +cat >expect.cl-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -459,7 +452,7 @@ test_expect_success 'thread explicit shallow' ' --in-reply-to="<test.message>" --thread=shallow master ' -cat > expect.deep <<EOF +cat >expect.deep <<EOF --- Message-Id: <0> --- @@ -477,7 +470,7 @@ test_expect_success 'thread deep' ' check_threading expect.deep --thread=deep master ' -cat > expect.deep-irt <<EOF +cat >expect.deep-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -500,7 +493,7 @@ test_expect_success 'thread deep in-reply-to' ' --in-reply-to="<test.message>" master ' -cat > expect.deep-cl <<EOF +cat >expect.deep-cl <<EOF --- Message-Id: <0> --- @@ -524,7 +517,7 @@ test_expect_success 'thread deep cover-letter' ' check_threading expect.deep-cl --cover-letter --thread=deep master ' -cat > expect.deep-cl-irt <<EOF +cat >expect.deep-cl-irt <<EOF --- Message-Id: <0> In-Reply-To: <1> @@ -575,7 +568,6 @@ test_expect_success 'thread config + --no-thread' ' ' test_expect_success 'excessive subject' ' - rm -rf patches/ && git checkout side && before=$(git hash-object file) && @@ -589,6 +581,12 @@ test_expect_success 'excessive subject' ' ls patches/0004-This-is-an-excessively-long-subject-line-for-a-messa.patch ' +test_expect_success 'failure to write cover-letter aborts gracefully' ' + test_when_finished "rmdir 0000-cover-letter.patch" && + mkdir 0000-cover-letter.patch && + test_must_fail git format-patch --no-renames --cover-letter -1 +' + test_expect_success 'cover-letter inherits diff options' ' git mv file foo && git commit -m foo && @@ -597,10 +595,9 @@ test_expect_success 'cover-letter inherits diff options' ' ! grep "file => foo .* 0 *\$" 0000-cover-letter.patch && git format-patch --cover-letter -1 -M && grep "file => foo .* 0 *\$" 0000-cover-letter.patch - ' -cat > expect << EOF +cat >expect <<EOF This is an excessively long subject line for a message due to the habit some projects have of not having a short, one-line subject at the start of the commit message, but rather sticking a whole @@ -611,14 +608,12 @@ cat > expect << EOF EOF test_expect_success 'shortlog of cover-letter wraps overly-long onelines' ' - git format-patch --cover-letter -2 && - sed -e "1,/A U Thor/d" -e "/^\$/q" < 0000-cover-letter.patch > output && + sed -e "1,/A U Thor/d" -e "/^\$/q" 0000-cover-letter.patch >output && test_cmp expect output - ' -cat > expect << EOF +cat >expect <<EOF index $before..$after 100644 --- a/file +++ b/file @@ -631,16 +626,14 @@ index $before..$after 100644 EOF test_expect_success 'format-patch respects -U' ' - git format-patch -U4 -2 && sed -e "1,/^diff/d" -e "/^+5/q" \ <0001-This-is-an-excessively-long-subject-line-for-a-messa.patch \ >output && test_cmp expect output - ' -cat > expect << EOF +cat >expect <<EOF diff --git a/file b/file index $before..$after 100644 @@ -654,11 +647,9 @@ index $before..$after 100644 EOF test_expect_success 'format-patch -p suppresses stat' ' - git format-patch -p -2 && - sed -e "1,/^\$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output && + sed -e "1,/^\$/d" -e "/^+5/q" 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch >output && test_cmp expect output - ' test_expect_success 'format-patch from a subdirectory (1)' ' @@ -711,7 +702,7 @@ test_expect_success 'format-patch from a subdirectory (3)' ' ' test_expect_success 'format-patch --in-reply-to' ' - git format-patch -1 --stdout --in-reply-to "baz@foo.bar" > patch8 && + git format-patch -1 --stdout --in-reply-to "baz@foo.bar" >patch8 && grep "^In-Reply-To: <baz@foo.bar>" patch8 && grep "^References: <baz@foo.bar>" patch8 ' @@ -732,21 +723,126 @@ test_expect_success 'format-patch --notes --signoff' ' sed "1,/^---$/d" out | grep "test message" ' -echo "fatal: --name-only does not make sense" > expect.name-only -echo "fatal: --name-status does not make sense" > expect.name-status -echo "fatal: --check does not make sense" > expect.check +test_expect_success 'format-patch notes output control' ' + git notes add -m "notes config message" HEAD && + test_when_finished git notes remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out && + + test_config format.notes true && + git format-patch -1 --stdout >out && + grep "notes config message" out && + git format-patch -1 --stdout --notes >out && + grep "notes config message" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --notes --no-notes >out && + ! grep "notes config message" out && + git format-patch -1 --stdout --no-notes --notes >out && + grep "notes config message" out +' + +test_expect_success 'format-patch with multiple notes refs' ' + git notes --ref note1 add -m "this is note 1" HEAD && + test_when_finished git notes --ref note1 remove HEAD && + git notes --ref note2 add -m "this is note 2" HEAD && + test_when_finished git notes --ref note2 remove HEAD && + + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --notes=note1 --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + + test_config format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git format-patch -1 --stdout --notes=note2 >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes --notes=note2 >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + + git config --add format.notes note2 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + grep "this is note 2" out && + git format-patch -1 --stdout --no-notes >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out +' + +test_expect_success 'format-patch with multiple notes refs in config' ' + test_when_finished "test_unconfig format.notes" && + + git notes --ref note1 add -m "this is note 1" HEAD && + test_when_finished git notes --ref note1 remove HEAD && + git notes --ref note2 add -m "this is note 2" HEAD && + test_when_finished git notes --ref note2 remove HEAD && + + git config format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + ! grep "this is note 2" out && + git config format.notes note2 && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + grep "this is note 2" out && + git config --add format.notes note1 && + git format-patch -1 --stdout >out && + grep "this is note 1" out && + grep "this is note 2" out && + + git config --replace-all format.notes note1 && + git config --add format.notes false && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + ! grep "this is note 2" out && + git config --add format.notes note2 && + git format-patch -1 --stdout >out && + ! grep "this is note 1" out && + grep "this is note 2" out +' + +echo "fatal: --name-only does not make sense" >expect.name-only +echo "fatal: --name-status does not make sense" >expect.name-status +echo "fatal: --check does not make sense" >expect.check test_expect_success 'options no longer allowed for format-patch' ' - test_must_fail git format-patch --name-only 2> output && + test_must_fail git format-patch --name-only 2>output && test_i18ncmp expect.name-only output && - test_must_fail git format-patch --name-status 2> output && + test_must_fail git format-patch --name-status 2>output && test_i18ncmp expect.name-status output && - test_must_fail git format-patch --check 2> output && - test_i18ncmp expect.check output' + test_must_fail git format-patch --check 2>output && + test_i18ncmp expect.check output +' test_expect_success 'format-patch --numstat should produce a patch' ' - git format-patch --numstat --stdout master..side > output && - test 5 = $(grep "^diff --git a/" output | wc -l)' + git format-patch --numstat --stdout master..side >output && + grep "^diff --git a/" output >diff && + test_line_count = 5 diff +' test_expect_success 'format-patch -- <path>' ' git format-patch master..side -- file 2>error && @@ -757,20 +853,25 @@ test_expect_success 'format-patch --ignore-if-in-upstream HEAD' ' git format-patch --ignore-if-in-upstream HEAD ' -git_version="$(git --version | sed "s/.* //")" +test_expect_success 'get git version' ' + git_version=$(git --version) && + git_version=${git_version##* } +' signature() { printf "%s\n%s\n\n" "-- " "${1:-$git_version}" } test_expect_success 'format-patch default signature' ' - git format-patch --stdout -1 | tail -n 3 >output && + git format-patch --stdout -1 >patch && + tail -n 3 patch >output && signature >expect && test_cmp expect output ' test_expect_success 'format-patch --signature' ' - git format-patch --stdout --signature="my sig" -1 | tail -n 3 >output && + git format-patch --stdout --signature="my sig" -1 >patch && + tail -n 3 patch >output && signature "my sig" >expect && test_cmp expect output ' @@ -802,8 +903,8 @@ test_expect_success 'format-patch --signature --cover-letter' ' git config --unset-all format.signature && git format-patch --stdout --signature="my sig" --cover-letter \ -1 >output && - grep "my sig" output && - test 2 = $(grep "my sig" output | wc -l) + grep "my sig" output >sig && + test_line_count = 2 sig ' test_expect_success 'format.signature="" suppresses signatures' ' @@ -840,7 +941,7 @@ test_expect_success 'prepare mail-signature input' ' test_expect_success '--signature-file=file works' ' git format-patch --stdout --signature-file=mail-signature -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat mail-signature && echo } >expect && @@ -851,7 +952,7 @@ test_expect_success 'format.signaturefile works' ' test_config format.signaturefile mail-signature && git format-patch --stdout -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat mail-signature && echo } >expect && @@ -873,7 +974,7 @@ test_expect_success '--signature-file overrides format.signaturefile' ' git format-patch --stdout \ --signature-file=other-mail-signature -1 >output && check_patch output && - sed -e "1,/^-- \$/d" <output >actual && + sed -e "1,/^-- \$/d" output >actual && { cat other-mail-signature && echo } >expect && @@ -942,7 +1043,7 @@ test_expect_success 'format-patch wraps extremely long subject (ascii)' ' git add file && git commit -m "$M512" && git format-patch --stdout -1 >patch && - sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + sed -n "/^Subject/p; /^ /p; /^$/q" patch >subject && test_cmp expect subject ' @@ -981,7 +1082,7 @@ test_expect_success 'format-patch wraps extremely long subject (rfc2047)' ' git add file && git commit -m "$M512" && git format-patch --stdout -1 >patch && - sed -n "/^Subject/p; /^ /p; /^$/q" <patch >subject && + sed -n "/^Subject/p; /^ /p; /^$/q" patch >subject && test_cmp expect subject ' @@ -990,7 +1091,7 @@ check_author() { git add file && GIT_AUTHOR_NAME=$1 git commit -m author-check && git format-patch --stdout -1 >patch && - sed -n "/^From: /p; /^ /p; /^$/q" <patch >actual && + sed -n "/^From: /p; /^ /p; /^$/q" patch >actual && test_cmp expect actual } @@ -1110,7 +1211,7 @@ test_expect_success '--from=ident replaces author' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1122,7 +1223,7 @@ test_expect_success '--from uses committer ident' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1132,7 +1233,7 @@ test_expect_success '--from omits redundant in-body header' ' From: A U Thor <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1147,7 +1248,7 @@ test_expect_success 'in-body headers trigger content encoding' ' From: éxötìc <author@example.com> EOF - sed -ne "/^From:/p; /^$/p; /^Content-Type/p; /^---$/q" <patch >patch.head && + sed -ne "/^From:/p; /^$/p; /^Content-Type/p; /^---$/q" patch >patch.head && test_cmp expect patch.head ' @@ -1161,283 +1262,283 @@ append_signoff() test_expect_success 'signoff: commit with no body' ' append_signoff </dev/null >actual && - cat <<\EOF | sed "s/EOL$//" >expected && -4:Subject: [PATCH] EOL -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat <<-\EOF | sed "s/EOL$//" >expect && + 4:Subject: [PATCH] EOL + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: commit with only subject' ' echo subject | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: commit with only subject that does not end with NL' ' printf subject | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: no existing signoffs' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + body + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: no existing signoffs and no trailing NL' ' printf "subject\n\nbody" | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: some random signoff' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: my@house -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: my@house + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: misc conforming footer elements' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: my@house -(cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709) -Tested-by: Some One <someone@example.com> -Bug: 1234 -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: my@house -15:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: my@house + (cherry picked from commit da39a3ee5e6b4b0d3255bfef95601890afd80709) + Tested-by: Some One <someone@example.com> + Bug: 1234 + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: my@house + 15:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: some random signoff-alike' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body -Fooled-by-me: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11: -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + body + Fooled-by-me: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11: + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: not really a signoff' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -I want to mention about Signed-off-by: here. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:I want to mention about Signed-off-by: here. -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + I want to mention about Signed-off-by: here. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:I want to mention about Signed-off-by: here. + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: not really a signoff (2)' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -My unfortunate -Signed-off-by: example happens to be wrapped here. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10:Signed-off-by: example happens to be wrapped here. -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + My unfortunate + Signed-off-by: example happens to be wrapped here. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10:Signed-off-by: example happens to be wrapped here. + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: valid S-o-b paragraph in the middle' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Signed-off-by: my@house -Signed-off-by: your@house + Signed-off-by: my@house + Signed-off-by: your@house -A lot of houses. -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: my@house -10:Signed-off-by: your@house -11: -13: -14:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + A lot of houses. + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: my@house + 10:Signed-off-by: your@house + 11: + 13: + 14:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff at the end' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: C O Mitter <committer@example.com> -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Signed-off-by: C O Mitter <committer@example.com> + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff at the end, no trailing NL' ' printf "subject\n\nSigned-off-by: C O Mitter <committer@example.com>" | append_signoff >actual && - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -9:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 9:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: the same signoff NOT at the end' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Signed-off-by: C O Mitter <committer@example.com> -Signed-off-by: my@house -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -11:Signed-off-by: C O Mitter <committer@example.com> -12:Signed-off-by: my@house -EOF - test_cmp expected actual + Signed-off-by: C O Mitter <committer@example.com> + Signed-off-by: my@house + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 11:Signed-off-by: C O Mitter <committer@example.com> + 12:Signed-off-by: my@house + EOF + test_cmp expect actual ' test_expect_success 'signoff: tolerate garbage in conforming footer' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Tested-by: my@house -Some Trash -Signed-off-by: C O Mitter <committer@example.com> -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -13:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Tested-by: my@house + Some Trash + Signed-off-by: C O Mitter <committer@example.com> + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 13:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: respect trailer config' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Myfooter: x -Some Trash -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11: -12:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual && + Myfooter: x + Some Trash + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11: + 12:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual && test_config trailer.Myfooter.ifexists add && - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -Myfooter: x -Some Trash -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -11:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Myfooter: x + Some Trash + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 11:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'signoff: footer begins with non-signoff without @ sign' ' - append_signoff <<\EOF >actual && -subject + append_signoff <<-\EOF >actual && + subject -body + body -Reviewed-id: Noone -Tested-by: my@house -Change-id: Ideadbeef -Signed-off-by: C O Mitter <committer@example.com> -Bug: 1234 -EOF - cat >expected <<\EOF && -4:Subject: [PATCH] subject -8: -10: -14:Signed-off-by: C O Mitter <committer@example.com> -EOF - test_cmp expected actual + Reviewed-id: Noone + Tested-by: my@house + Change-id: Ideadbeef + Signed-off-by: C O Mitter <committer@example.com> + Bug: 1234 + EOF + cat >expect <<-\EOF && + 4:Subject: [PATCH] subject + 8: + 10: + 14:Signed-off-by: C O Mitter <committer@example.com> + EOF + test_cmp expect actual ' test_expect_success 'format patch ignores color.ui' ' @@ -1448,46 +1549,218 @@ test_expect_success 'format patch ignores color.ui' ' test_cmp expect actual ' +test_expect_success 'cover letter with invalid --cover-from-description and config' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_must_fail git format-patch --cover-letter --cover-from-description garbage master && + test_config format.coverFromDescription garbage && + test_must_fail git format-patch --cover-letter master +' + +test_expect_success 'cover letter with format.coverFromDescription = default' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription default && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description default' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description default master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = none' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription none && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + ! grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description none' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description none master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + ! grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = message' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription message && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description message' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description message master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = subject' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription subject && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description subject' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description subject master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = auto (short subject line)' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription auto && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description auto (short subject line)' ' + test_config branch.rebuild-1.description "config subject + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description auto master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with format.coverFromDescription = auto (long subject line)' ' + test_config branch.rebuild-1.description "this is a really long first line and it is over 100 characters long which is the threshold for long subjects + +body" && + test_config format.coverFromDescription auto && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with --cover-from-description auto (long subject line)' ' + test_config branch.rebuild-1.description "this is a really long first line and it is over 100 characters long which is the threshold for long subjects + +body" && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description auto master >actual && + grep "^Subject: \[PATCH 0/2\] \*\*\* SUBJECT HERE \*\*\*$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + grep "^this is a really long first line and it is over 100 characters long which is the threshold for long subjects$" actual && + grep "^body$" actual +' + +test_expect_success 'cover letter with command-line --cover-from-description overrides config' ' + test_config branch.rebuild-1.description "config subject + +body" && + test_config format.coverFromDescription none && + git checkout rebuild-1 && + git format-patch --stdout --cover-letter --cover-from-description subject master >actual && + grep "^Subject: \[PATCH 0/2\] config subject$" actual && + ! grep "^\*\*\* BLURB HERE \*\*\*$" actual && + ! grep "^config subject$" actual && + grep "^body$" actual +' + test_expect_success 'cover letter using branch description (1)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter master >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (2)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter rebuild-1~2..rebuild-1 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (3)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter ^master rebuild-1 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (4)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter master.. >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (5)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter -2 HEAD >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter using branch description (6)' ' git checkout rebuild-1 && test_config branch.rebuild-1.description hello && git format-patch --stdout --cover-letter -2 >actual && - grep hello actual >/dev/null + grep hello actual ' test_expect_success 'cover letter with nothing' ' @@ -1537,11 +1810,39 @@ test_expect_success 'From line has expected format' ' test_cmp from filtered ' +test_expect_success 'format-patch -o with no leading directories' ' + rm -fr patches && + git format-patch -o patches master..side && + count=$(git rev-list --count master..side) && + ls patches >list && + test_line_count = $count list +' + +test_expect_success 'format-patch -o with leading existing directories' ' + rm -rf existing-dir && + mkdir existing-dir && + git format-patch -o existing-dir/patches master..side && + count=$(git rev-list --count master..side) && + ls existing-dir/patches >list && + test_line_count = $count list +' + +test_expect_success 'format-patch -o with leading non-existing directories' ' + rm -rf non-existing-dir && + git format-patch -o non-existing-dir/patches master..side && + count=$(git rev-list --count master..side) && + test_path_is_dir non-existing-dir && + ls non-existing-dir/patches >list && + test_line_count = $count list +' + test_expect_success 'format-patch format.outputDirectory option' ' test_config format.outputDirectory patches && rm -fr patches && git format-patch master..side && - test $(git rev-list master..side | wc -l) -eq $(ls patches | wc -l) + count=$(git rev-list --count master..side) && + ls patches >list && + test_line_count = $count list ' test_expect_success 'format-patch -o overrides format.outputDirectory' ' @@ -1553,16 +1854,44 @@ test_expect_success 'format-patch -o overrides format.outputDirectory' ' ' test_expect_success 'format-patch --base' ' - git checkout side && - git format-patch --stdout --base=HEAD~3 -1 | tail -n 7 >actual1 && - git format-patch --stdout --base=HEAD~3 HEAD~.. | tail -n 7 >actual2 && - echo >expected && - echo "base-commit: $(git rev-parse HEAD~3)" >>expected && - echo "prerequisite-patch-id: $(git show --patch HEAD~2 | git patch-id --stable | awk "{print \$1}")" >>expected && - echo "prerequisite-patch-id: $(git show --patch HEAD~1 | git patch-id --stable | awk "{print \$1}")" >>expected && - signature >> expected && - test_cmp expected actual1 && - test_cmp expected actual2 + git checkout patchid && + + git format-patch --stdout --base=HEAD~3 -1 >patch && + tail -n 7 patch >actual1 && + + git format-patch --stdout --base=HEAD~3 HEAD~.. >patch && + tail -n 7 patch >actual2 && + + echo >expect && + git rev-parse HEAD~3 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >>expect && + + git show --patch HEAD~2 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + + git show --patch HEAD~1 >patch && + git patch-id --stable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>expect && + + signature >>expect && + test_cmp expect actual1 && + test_cmp expect actual2 && + + echo >fail && + echo "base-commit: $(cat commit-id-base)" >>fail && + + git show --patch HEAD~2 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + + git show --patch HEAD~1 >patch && + git patch-id --unstable <patch >patch.id.raw && + awk "{print \"prerequisite-patch-id:\", \$1}" <patch.id.raw >>fail && + + signature >>fail && + ! test_cmp fail actual1 && + ! test_cmp fail actual2 ' test_expect_success 'format-patch --base errors out when base commit is in revision list' ' @@ -1570,8 +1899,9 @@ test_expect_success 'format-patch --base errors out when base commit is in revis test_must_fail git format-patch --base=HEAD~1 -2 && git format-patch --stdout --base=HEAD~2 -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~2)" >expected && - test_cmp expected actual + git rev-parse HEAD~2 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base errors out when base commit is not ancestor of revision list' ' @@ -1597,8 +1927,8 @@ test_expect_success 'format-patch --base errors out when base commit is not ance test_must_fail git format-patch --base=$(cat commit-id-Z) -3 && git format-patch --stdout --base=$(cat commit-id-base) -3 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(cat commit-id-base)" >expected && - test_cmp expected actual + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base=auto' ' @@ -1609,8 +1939,9 @@ test_expect_success 'format-patch --base=auto' ' test_commit N2 && git format-patch --stdout --base=auto -2 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expected && - test_cmp expected actual + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch errors out when history involves criss-cross' ' @@ -1640,23 +1971,29 @@ test_expect_success 'format-patch errors out when history involves criss-cross' test_must_fail git format-patch --base=auto -1 ' -test_expect_success 'format-patch format.useAutoBaseoption' ' - test_when_finished "git config --unset format.useAutoBase" && +test_expect_success 'format-patch format.useAutoBase option' ' git checkout local && - git config format.useAutoBase true && + test_config format.useAutoBase true && git format-patch --stdout -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse upstream)" >expected && - test_cmp expected actual + git rev-parse upstream >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual ' test_expect_success 'format-patch --base overrides format.useAutoBase' ' - test_when_finished "git config --unset format.useAutoBase" && - git config format.useAutoBase true && + test_config format.useAutoBase true && git format-patch --stdout --base=HEAD~1 -1 >patch && grep "^base-commit:" patch >actual && - echo "base-commit: $(git rev-parse HEAD~1)" >expected && - test_cmp expected actual + git rev-parse HEAD~1 >commit-id-base && + echo "base-commit: $(cat commit-id-base)" >expect && + test_cmp expect actual +' + +test_expect_success 'format-patch --no-base overrides format.useAutoBase' ' + test_config format.useAutoBase true && + git format-patch --stdout --no-base -1 >patch && + ! grep "^base-commit:" patch ' test_expect_success 'format-patch --base with --attach' ' @@ -1731,7 +2068,7 @@ test_expect_success 'interdiff: cover-letter' ' git format-patch --cover-letter --interdiff=boop~2 -1 boop && test_i18ngrep "^Interdiff:$" 0000-cover-letter.patch && test_i18ngrep ! "^Interdiff:$" 0001-fleep.patch && - sed "1,/^@@ /d; /^-- $/q" <0000-cover-letter.patch >actual && + sed "1,/^@@ /d; /^-- $/q" 0000-cover-letter.patch >actual && test_cmp expect actual ' @@ -1747,7 +2084,7 @@ test_expect_success 'interdiff: solo-patch' ' EOF git format-patch --interdiff=boop~2 -1 boop && test_i18ngrep "^Interdiff:$" 0001-fleep.patch && - sed "1,/^ @@ /d; /^$/q" <0001-fleep.patch >actual && + sed "1,/^ @@ /d; /^$/q" 0001-fleep.patch >actual && test_cmp expect actual ' diff --git a/t/t4015-diff-whitespace.sh b/t/t4015-diff-whitespace.sh index a9fb226..88d3026 100755 --- a/t/t4015-diff-whitespace.sh +++ b/t/t4015-diff-whitespace.sh @@ -16,6 +16,8 @@ test_expect_success "Ray Lehtiniemi's example" ' } while (0); EOF git update-index --add x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && cat <<-\EOF >x && do @@ -24,10 +26,12 @@ test_expect_success "Ray Lehtiniemi's example" ' } while (0); EOF + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - cat <<-\EOF >expect && + cat <<-EOF >expect && diff --git a/x b/x - index adf3937..6edc172 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,3 +1,5 @@ @@ -61,6 +65,8 @@ test_expect_success 'another test, without options' ' EOF git update-index x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && tr "_" " " <<-\EOF >x && _ whitespace at beginning @@ -70,10 +76,12 @@ test_expect_success 'another test, without options' ' unchanged line CR at end EOF + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -108,9 +116,9 @@ test_expect_success 'another test, without options' ' git diff -w --ignore-cr-at-eol >out && test_must_be_empty out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -132,9 +140,9 @@ test_expect_success 'another test, without options' ' git diff -b --ignore-cr-at-eol >out && test_cmp expect out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index d99af23..22d9f73 100644 + index $before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -154,9 +162,9 @@ test_expect_success 'another test, without options' ' git diff --ignore-space-at-eol --ignore-cr-at-eol >out && test_cmp expect out && - tr "Q_" "\015 " <<-\EOF >expect && + tr "Q_" "\015 " <<-EOF >expect && diff --git a/x b/x - index_d99af23..22d9f73 100644 + index_$before..$after 100644 --- a/x +++ b/x @@ -1,6 +1,6 @@ @@ -522,13 +530,15 @@ test_expect_success 'ignore-blank-lines: mix changes and blank lines' ' test_expect_success 'check mixed spaces and tabs in indent' ' # This is indented with SP HT SP. echo " foo();" >x && - git diff --check | grep "space before tab in indent" + test_must_fail git diff --check >check && + grep "space before tab in indent" check ' test_expect_success 'check mixed tabs and spaces in indent' ' # This is indented with HT SP HT. echo " foo();" >x && - git diff --check | grep "space before tab in indent" + test_must_fail git diff --check >check && + grep "space before tab in indent" check ' test_expect_success 'check with no whitespace errors' ' @@ -749,20 +759,23 @@ test_expect_success 'check tab-in-indent excluded from wildcard whitespace attri test_expect_success 'line numbers in --check output are correct' ' echo "" >x && echo "foo(); " >>x && - git diff --check | grep "x:2:" + test_must_fail git diff --check >check && + grep "x:2:" check ' test_expect_success 'checkdiff detects new trailing blank lines (1)' ' echo "foo();" >x && echo "" >>x && - git diff --check | grep "new blank line" + test_must_fail git diff --check >check && + grep "new blank line" check ' test_expect_success 'checkdiff detects new trailing blank lines (2)' ' - { echo a; echo b; echo; echo; } >x && + test_write_lines a b "" "" >x && git add x && - { echo a; echo; echo; echo; echo; } >x && - git diff --check | grep "new blank line" + test_write_lines a "" "" "" "" >x && + test_must_fail git diff --check >check && + grep "new blank line" check ' test_expect_success 'checkdiff allows new blank lines' ' @@ -786,23 +799,27 @@ test_expect_success 'whitespace-only changes not reported' ' test_must_be_empty actual ' -cat <<EOF >expect -diff --git a/x b/z -similarity index NUM% -rename from x -rename to z -index 380c32a..a97b785 100644 -EOF test_expect_success 'whitespace-only changes reported across renames' ' git reset --hard && for i in 1 2 3 4 5 6 7 8 9; do echo "$i$i$i$i$i$i"; done >x && git add x && + hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$hash_x") && git commit -m "base" && sed -e "5s/^/ /" x >z && git rm x && git add z && - git diff -w -M --cached | - sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" >actual && + hash_z=$(git hash-object z) && + after=$(git rev-parse --short "$hash_z") && + git diff -w -M --cached >actual.raw && + sed -e "/^similarity index /s/[0-9][0-9]*/NUM/" actual.raw >actual && + cat <<-EOF >expect && + diff --git a/x b/z + similarity index NUM% + rename from x + rename to z + index $before..$after 100644 + EOF test_cmp expect actual ' @@ -834,7 +851,8 @@ test_expect_success 'combined diff with autocrlf conversion' ' git config core.autocrlf true && test_must_fail git merge master && - git diff | sed -e "1,/^@@@/d" >actual && + git diff >actual.raw && + sed -e "1,/^@@@/d" actual.raw >actual && ! grep "^-" actual ' @@ -858,13 +876,18 @@ test_expect_success 'diff that introduces a line with only tabs' ' git config core.whitespace blank-at-eol && git reset --hard && echo "test" >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -m "initial" x && echo "{NTN}" | tr "NT" "\n\t" >>x && - git diff --color | test_decode_color >current && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && + git diff --color >current.raw && + test_decode_color <current.raw >current && - cat >expected <<-\EOF && + cat >expected <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index 9daeafb..2874b91 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1 +1,4 @@<RESET> @@ -883,19 +906,23 @@ test_expect_success 'diff that introduces and removes ws breakages' ' echo "0. blank-at-eol " && echo "1. blank-at-eol " } >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -a --allow-empty -m preimage && { echo "0. blank-at-eol " && echo "1. still-blank-at-eol " && echo "2. and a new line " } >x && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - git diff --color | - test_decode_color >current && + git diff --color >current.raw && + test_decode_color <current.raw >current && - cat >expected <<-\EOF && + cat >expected <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -915,16 +942,20 @@ test_expect_success 'ws-error-highlight test setup' ' echo "0. blank-at-eol " && echo "1. blank-at-eol " } >x && + old_hash_x=$(git hash-object x) && + before=$(git rev-parse --short "$old_hash_x") && git commit -a --allow-empty -m preimage && { echo "0. blank-at-eol " && echo "1. still-blank-at-eol " && echo "2. and a new line " } >x && + new_hash_x=$(git hash-object x) && + after=$(git rev-parse --short "$new_hash_x") && - cat >expect.default-old <<-\EOF && + cat >expect.default-old <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -934,9 +965,9 @@ test_expect_success 'ws-error-highlight test setup' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - cat >expect.all <<-\EOF && + cat >expect.all <<-EOF && <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -946,9 +977,9 @@ test_expect_success 'ws-error-highlight test setup' ' <GREEN>+<RESET><GREEN>2. and a new line<RESET><BLUE> <RESET> EOF - cat >expect.none <<-\EOF + cat >expect.none <<-EOF <BOLD>diff --git a/x b/x<RESET> - <BOLD>index d0233a2..700886e 100644<RESET> + <BOLD>index $before..$after 100644<RESET> <BOLD>--- a/x<RESET> <BOLD>+++ b/x<RESET> <CYAN>@@ -1,2 +1,3 @@<RESET> @@ -962,32 +993,32 @@ test_expect_success 'ws-error-highlight test setup' ' test_expect_success 'test --ws-error-highlight option' ' - git diff --color --ws-error-highlight=default,old | - test_decode_color >current && + git diff --color --ws-error-highlight=default,old >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && - git diff --color --ws-error-highlight=all | - test_decode_color >current && + git diff --color --ws-error-highlight=all >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && - git diff --color --ws-error-highlight=none | - test_decode_color >current && + git diff --color --ws-error-highlight=none >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' test_expect_success 'test diff.wsErrorHighlight config' ' - git -c diff.wsErrorHighlight=default,old diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=default,old diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && - git -c diff.wsErrorHighlight=all diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=all diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && - git -c diff.wsErrorHighlight=none diff --color | - test_decode_color >current && + git -c diff.wsErrorHighlight=none diff --color >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' @@ -995,18 +1026,18 @@ test_expect_success 'test diff.wsErrorHighlight config' ' test_expect_success 'option overrides diff.wsErrorHighlight' ' git -c diff.wsErrorHighlight=none \ - diff --color --ws-error-highlight=default,old | - test_decode_color >current && + diff --color --ws-error-highlight=default,old >current.raw && + test_decode_color <current.raw >current && test_cmp expect.default-old current && git -c diff.wsErrorHighlight=default \ - diff --color --ws-error-highlight=all | - test_decode_color >current && + diff --color --ws-error-highlight=all >current.raw && + test_decode_color <current.raw >current && test_cmp expect.all current && git -c diff.wsErrorHighlight=all \ - diff --color --ws-error-highlight=none | - test_decode_color >current && + diff --color --ws-error-highlight=none >current.raw && + test_decode_color <current.raw >current && test_cmp expect.none current ' @@ -1022,14 +1053,16 @@ test_expect_success 'detect moved code, complete file' ' EOF git add test.c && git commit -m "add main function" && + file=$(git rev-parse --short HEAD:test.c) && git mv test.c main.c && test_config color.diff.oldMoved "normal red" && test_config color.diff.newMoved "normal green" && - git diff HEAD --color-moved=zebra --color --no-renames | test_decode_color >actual && - cat >expected <<-\EOF && + git diff HEAD --color-moved=zebra --color --no-renames >actual.raw && + test_decode_color <actual.raw >actual && + cat >expected <<-EOF && <BOLD>diff --git a/main.c b/main.c<RESET> <BOLD>new file mode 100644<RESET> - <BOLD>index 0000000..a986c57<RESET> + <BOLD>index 0000000..$file<RESET> <BOLD>--- /dev/null<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -0,0 +1,5 @@<RESET> @@ -1040,7 +1073,7 @@ test_expect_success 'detect moved code, complete file' ' <BGREEN>+<RESET><BGREEN>}<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> <BOLD>deleted file mode 100644<RESET> - <BOLD>index a986c57..0000000<RESET> + <BOLD>index $file..0000000<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ /dev/null<RESET> <CYAN>@@ -1,5 +0,0 @@<RESET> @@ -1094,6 +1127,8 @@ test_expect_success 'detect malicious moved code, inside file' ' EOF git add main.c test.c && git commit -m "add main and test file" && + before_main=$(git rev-parse --short HEAD:main.c) && + before_test=$(git rev-parse --short HEAD:test.c) && cat <<-\EOF >main.c && #include<stdio.h> int stuff() @@ -1126,10 +1161,15 @@ test_expect_success 'detect malicious moved code, inside file' ' bar(); } EOF - git diff HEAD --no-renames --color-moved=zebra --color | test_decode_color >actual && - cat <<-\EOF >expected && + hash_main=$(git hash-object main.c) && + after_main=$(git rev-parse --short "$hash_main") && + hash_test=$(git hash-object test.c) && + after_test=$(git rev-parse --short "$hash_test") && + git diff HEAD --no-renames --color-moved=zebra --color >actual.raw && + test_decode_color <actual.raw >actual && + cat <<-EOF >expected && <BOLD>diff --git a/main.c b/main.c<RESET> - <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>index $before_main..$after_main 100644<RESET> <BOLD>--- a/main.c<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> @@ -1147,7 +1187,7 @@ test_expect_success 'detect malicious moved code, inside file' ' {<RESET> foo();<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> - <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>index $before_test..$after_test 100644<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ b/test.c<RESET> <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> @@ -1175,10 +1215,11 @@ test_expect_success 'plain moved code, inside file' ' test_config color.diff.oldMovedAlternative "blue" && test_config color.diff.newMovedAlternative "yellow" && # needs previous test as setup - git diff HEAD --no-renames --color-moved=plain --color | test_decode_color >actual && - cat <<-\EOF >expected && + git diff HEAD --no-renames --color-moved=plain --color >actual.raw && + test_decode_color <actual.raw >actual && + cat <<-EOF >expected && <BOLD>diff --git a/main.c b/main.c<RESET> - <BOLD>index 27a619c..7cf9336 100644<RESET> + <BOLD>index $before_main..$after_main 100644<RESET> <BOLD>--- a/main.c<RESET> <BOLD>+++ b/main.c<RESET> <CYAN>@@ -5,13 +5,6 @@<RESET> <RESET>printf("Hello ");<RESET> @@ -1196,7 +1237,7 @@ test_expect_success 'plain moved code, inside file' ' {<RESET> foo();<RESET> <BOLD>diff --git a/test.c b/test.c<RESET> - <BOLD>index 1dc1d85..2bedec9 100644<RESET> + <BOLD>index $before_test..$after_test 100644<RESET> <BOLD>--- a/test.c<RESET> <BOLD>+++ b/test.c<RESET> <CYAN>@@ -4,6 +4,13 @@<RESET> <RESET>int bar()<RESET> @@ -1754,7 +1795,8 @@ test_expect_success 'move detection with submodules' ' ! grep BRED decoded_actual && # nor did we mess with it another way - git diff --submodule=diff --color | test_decode_color >expect && + git diff --submodule=diff --color >expect.raw && + test_decode_color <expect.raw >expect && test_cmp expect decoded_actual && rm -rf bananas && git submodule deinit bananas @@ -1802,8 +1844,8 @@ test_expect_success 'only move detection ignores white spaces' ' <BOLD;MAGENTA>-a long line to exceed per-line minimum<RESET> <BOLD;MAGENTA>-another long line to exceed per-line minimum<RESET> <RED>-original file<RESET> - <BOLD;YELLOW>+<RESET>Q<BOLD;YELLOW>a long line to exceed per-line minimum<RESET> - <BOLD;YELLOW>+<RESET>Q<BOLD;YELLOW>another long line to exceed per-line minimum<RESET> + <BOLD;CYAN>+<RESET>Q<BOLD;CYAN>a long line to exceed per-line minimum<RESET> + <BOLD;CYAN>+<RESET>Q<BOLD;CYAN>another long line to exceed per-line minimum<RESET> <GREEN>+<RESET><GREEN>new file<RESET> EOF test_cmp expected actual @@ -1827,6 +1869,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' QQQthat has similar lines QQQto previous blocks, but with different indent QQQYetQAnotherQoutlierQ + QLine with internal w h i t e s p a c e change EOF git add text.txt && @@ -1847,6 +1890,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' QQthat has similar lines QQto previous blocks, but with different indent QQYetQAnotherQoutlier + QLine with internal whitespace change EOF git diff --color --color-moved --color-moved-ws=allow-indentation-change >actual.raw && @@ -1856,7 +1900,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD>diff --git a/text.txt b/text.txt<RESET> <BOLD>--- a/text.txt<RESET> <BOLD>+++ b/text.txt<RESET> - <CYAN>@@ -1,14 +1,14 @@<RESET> + <CYAN>@@ -1,15 +1,15 @@<RESET> <BOLD;MAGENTA>-QIndented<RESET> <BOLD;MAGENTA>-QText across<RESET> <BOLD;MAGENTA>-Qsome lines<RESET> @@ -1871,6 +1915,7 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD;MAGENTA>-QQQthat has similar lines<RESET> <BOLD;MAGENTA>-QQQto previous blocks, but with different indent<RESET> <RED>-QQQYetQAnotherQoutlierQ<RESET> + <RED>-QLine with internal w h i t e s p a c e change<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>Indented<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>Text across<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>some lines<RESET> @@ -1885,11 +1930,30 @@ test_expect_success 'compare whitespace delta across moved blocks' ' <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>that has similar lines<RESET> <BOLD;CYAN>+<RESET>QQ<BOLD;CYAN>to previous blocks, but with different indent<RESET> <GREEN>+<RESET>QQ<GREEN>YetQAnotherQoutlier<RESET> + <GREEN>+<RESET>Q<GREEN>Line with internal whitespace change<RESET> EOF test_cmp expected actual ' +test_expect_success 'bogus settings in move detection erroring out' ' + test_must_fail git diff --color-moved=bogus 2>err && + test_i18ngrep "must be one of" err && + test_i18ngrep bogus err && + + test_must_fail git -c diff.colormoved=bogus diff 2>err && + test_i18ngrep "must be one of" err && + test_i18ngrep "from command-line config" err && + + test_must_fail git diff --color-moved-ws=bogus 2>err && + test_i18ngrep "possible values" err && + test_i18ngrep bogus err && + + test_must_fail git -c diff.colormovedws=bogus diff 2>err && + test_i18ngrep "possible values" err && + test_i18ngrep "from command-line config" err +' + test_expect_success 'compare whitespace delta incompatible with other space options' ' test_must_fail git diff \ --color-moved-ws=allow-indentation-change,ignore-all-space \ @@ -1897,4 +1961,134 @@ test_expect_success 'compare whitespace delta incompatible with other space opti test_i18ngrep allow-indentation-change err ' +EMPTY='' +test_expect_success 'compare mixed whitespace delta across moved blocks' ' + + git reset --hard && + tr Q_ "\t " <<-EOF >text.txt && + ${EMPTY} + ____too short without + ${EMPTY} + ___being grouped across blank line + ${EMPTY} + context + lines + to + anchor + ____Indented text to + _Q____be further indented by four spaces across + ____Qseveral lines + QQ____These two lines have had their + ____indentation reduced by four spaces + Qdifferent indentation change + ____too short + EOF + + git add text.txt && + git commit -m "add text.txt" && + + tr Q_ "\t " <<-EOF >text.txt && + context + lines + to + anchor + QIndented text to + QQbe further indented by four spaces across + Q____several lines + ${EMPTY} + QQtoo short without + ${EMPTY} + Q_______being grouped across blank line + ${EMPTY} + Q_QThese two lines have had their + indentation reduced by four spaces + QQdifferent indentation change + __Qtoo short + EOF + + git -c color.diff.whitespace="normal red" \ + -c core.whitespace=space-before-tab \ + diff --color --color-moved --ws-error-highlight=all \ + --color-moved-ws=allow-indentation-change >actual.raw && + grep -v "index" actual.raw | test_decode_color >actual && + + cat <<-\EOF >expected && + <BOLD>diff --git a/text.txt b/text.txt<RESET> + <BOLD>--- a/text.txt<RESET> + <BOLD>+++ b/text.txt<RESET> + <CYAN>@@ -1,16 +1,16 @@<RESET> + <BOLD;MAGENTA>-<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> too short without<RESET> + <BOLD;MAGENTA>-<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> being grouped across blank line<RESET> + <BOLD;MAGENTA>-<RESET> + <RESET>context<RESET> + <RESET>lines<RESET> + <RESET>to<RESET> + <RESET>anchor<RESET> + <BOLD;MAGENTA>-<RESET><BOLD;MAGENTA> Indented text to<RESET> + <BOLD;MAGENTA>-<RESET><BRED> <RESET> <BOLD;MAGENTA> be further indented by four spaces across<RESET> + <BOLD;MAGENTA>-<RESET><BRED> <RESET> <BOLD;MAGENTA>several lines<RESET> + <BOLD;BLUE>-<RESET> <BOLD;BLUE> These two lines have had their<RESET> + <BOLD;BLUE>-<RESET><BOLD;BLUE> indentation reduced by four spaces<RESET> + <BOLD;MAGENTA>-<RESET> <BOLD;MAGENTA>different indentation change<RESET> + <RED>-<RESET><RED> too short<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN>Indented text to<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN>be further indented by four spaces across<RESET> + <BOLD;CYAN>+<RESET> <BOLD;CYAN> several lines<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW>too short without<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW> being grouped across blank line<RESET> + <BOLD;YELLOW>+<RESET> + <BOLD;CYAN>+<RESET> <BRED> <RESET> <BOLD;CYAN>These two lines have had their<RESET> + <BOLD;CYAN>+<RESET><BOLD;CYAN>indentation reduced by four spaces<RESET> + <BOLD;YELLOW>+<RESET> <BOLD;YELLOW>different indentation change<RESET> + <GREEN>+<RESET><BRED> <RESET> <GREEN>too short<RESET> + EOF + + test_cmp expected actual +' + +test_expect_success 'combine --ignore-blank-lines with --function-context' ' + test_write_lines 1 "" 2 3 4 5 >a && + test_write_lines 1 2 3 4 >b && + test_must_fail git diff --no-index \ + --ignore-blank-lines --function-context a b >actual.raw && + sed -n "/@@/,\$p" <actual.raw >actual && + cat <<-\EOF >expect && + @@ -1,6 +1,4 @@ + 1 + - + 2 + 3 + 4 + -5 + EOF + test_cmp expect actual +' + +test_expect_success 'combine --ignore-blank-lines with --function-context 2' ' + test_write_lines a b c "" function 1 2 3 4 5 "" 6 7 8 9 >a && + test_write_lines "" a b c "" function 1 2 3 4 5 6 7 8 >b && + test_must_fail git diff --no-index \ + --ignore-blank-lines --function-context a b >actual.raw && + sed -n "/@@/,\$p" <actual.raw >actual && + cat <<-\EOF >expect && + @@ -5,11 +6,9 @@ c + function + 1 + 2 + 3 + 4 + 5 + - + 6 + 7 + 8 + -9 + EOF + test_cmp expect actual +' + test_done diff --git a/t/t4018-diff-funcname.sh b/t/t4018-diff-funcname.sh index 22f9f88..02255a0 100755 --- a/t/t4018-diff-funcname.sh +++ b/t/t4018-diff-funcname.sh @@ -31,6 +31,8 @@ diffpatterns=" cpp csharp css + dts + elixir fortran fountain golang @@ -43,6 +45,7 @@ diffpatterns=" php python ruby + rust tex custom1 custom2 @@ -103,7 +106,6 @@ do result=success fi test_expect_$result "hunk header: $i" " - test_when_finished 'cat actual' && # for debugging only git diff -U1 $i >actual && grep '@@ .* @@.*RIGHT' actual " diff --git a/t/t4018/dts-labels b/t/t4018/dts-labels new file mode 100644 index 0000000..b21ef87 --- /dev/null +++ b/t/t4018/dts-labels @@ -0,0 +1,9 @@ +/ { + label_1: node1@ff00 { + label2: RIGHT { + vendor,some-property; + + ChangeMe = <0x45-30>; + }; + }; +}; diff --git a/t/t4018/dts-node-unitless b/t/t4018/dts-node-unitless new file mode 100644 index 0000000..c5287d9 --- /dev/null +++ b/t/t4018/dts-node-unitless @@ -0,0 +1,8 @@ +/ { + label_1: node1 { + RIGHT { + prop-array = <1>, <4>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes b/t/t4018/dts-nodes new file mode 100644 index 0000000..5a4334b --- /dev/null +++ b/t/t4018/dts-nodes @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes-boolean-prop b/t/t4018/dts-nodes-boolean-prop new file mode 100644 index 0000000..afc6b5b --- /dev/null +++ b/t/t4018/dts-nodes-boolean-prop @@ -0,0 +1,9 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { + boolean-prop1; + + ChangeMe; + }; + }; +}; diff --git a/t/t4018/dts-nodes-comment1 b/t/t4018/dts-nodes-comment1 new file mode 100644 index 0000000..559dfce --- /dev/null +++ b/t/t4018/dts-nodes-comment1 @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 /* &a comment */ { + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes-comment2 b/t/t4018/dts-nodes-comment2 new file mode 100644 index 0000000..27e9718 --- /dev/null +++ b/t/t4018/dts-nodes-comment2 @@ -0,0 +1,8 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { /* a trailing comment */ + #size-cells = <1>; + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-nodes-multiline-prop b/t/t4018/dts-nodes-multiline-prop new file mode 100644 index 0000000..072d58b --- /dev/null +++ b/t/t4018/dts-nodes-multiline-prop @@ -0,0 +1,13 @@ +/ { + label_1: node1@ff00 { + RIGHT@deadf00,4000 { + multilineprop = <3>, + <4>, + <5>, + <6>, + <7>; + + ChangeMe = <0xffeedd00>; + }; + }; +}; diff --git a/t/t4018/dts-reference b/t/t4018/dts-reference new file mode 100644 index 0000000..8f0c87d --- /dev/null +++ b/t/t4018/dts-reference @@ -0,0 +1,9 @@ +&label_1 { + TEST = <455>; +}; + +&RIGHT { + vendor,some-property; + + ChangeMe = <0x45-30>; +}; diff --git a/t/t4018/dts-root b/t/t4018/dts-root new file mode 100644 index 0000000..4353b82 --- /dev/null +++ b/t/t4018/dts-root @@ -0,0 +1,5 @@ +/ { RIGHT /* Technically just supposed to be a slash and brace */ + #size-cells = <1>; + + ChangeMe = <0xffeedd00>; +}; diff --git a/t/t4018/dts-root-comment b/t/t4018/dts-root-comment new file mode 100644 index 0000000..333a625 --- /dev/null +++ b/t/t4018/dts-root-comment @@ -0,0 +1,8 @@ +/ { RIGHT /* Technically just supposed to be a slash and brace */ + #size-cells = <1>; + + /* This comment should be ignored */ + + some-property = <40+2>; + ChangeMe = <0xffeedd00>; +}; diff --git a/t/t4018/elixir-do-not-pick-end b/t/t4018/elixir-do-not-pick-end new file mode 100644 index 0000000..fae08ba --- /dev/null +++ b/t/t4018/elixir-do-not-pick-end @@ -0,0 +1,5 @@ +defmodule RIGHT do +end +# +# +# ChangeMe; do not pick up 'end' line diff --git a/t/t4018/elixir-ex-unit-test b/t/t4018/elixir-ex-unit-test new file mode 100644 index 0000000..0560a2b --- /dev/null +++ b/t/t4018/elixir-ex-unit-test @@ -0,0 +1,6 @@ +defmodule Test do + test "RIGHT" do + assert true == true + assert ChangeMe + end +end diff --git a/t/t4018/elixir-function b/t/t4018/elixir-function new file mode 100644 index 0000000..d452f49 --- /dev/null +++ b/t/t4018/elixir-function @@ -0,0 +1,5 @@ +def function(RIGHT, arg) do + # comment + # comment + ChangeMe +end diff --git a/t/t4018/elixir-macro b/t/t4018/elixir-macro new file mode 100644 index 0000000..4f925e9 --- /dev/null +++ b/t/t4018/elixir-macro @@ -0,0 +1,5 @@ +defmacro foo(RIGHT) do + # Code + # Code + ChangeMe +end diff --git a/t/t4018/elixir-module b/t/t4018/elixir-module new file mode 100644 index 0000000..91a4e7a --- /dev/null +++ b/t/t4018/elixir-module @@ -0,0 +1,9 @@ +defmodule RIGHT do + @moduledoc """ + Foo bar + """ + + def ChangeMe(a) where is_map(a) do + a + end +end diff --git a/t/t4018/elixir-module-func b/t/t4018/elixir-module-func new file mode 100644 index 0000000..c9910d0 --- /dev/null +++ b/t/t4018/elixir-module-func @@ -0,0 +1,8 @@ +defmodule Foo do + def fun(RIGHT) do + # Code + # Code + # Code + ChangeMe + end +end diff --git a/t/t4018/elixir-nested-module b/t/t4018/elixir-nested-module new file mode 100644 index 0000000..771ebc5 --- /dev/null +++ b/t/t4018/elixir-nested-module @@ -0,0 +1,9 @@ +defmodule MyApp.RIGHT do + @moduledoc """ + Foo bar + """ + + def ChangeMe(a) where is_map(a) do + a + end +end diff --git a/t/t4018/elixir-private-function b/t/t4018/elixir-private-function new file mode 100644 index 0000000..1aabe33 --- /dev/null +++ b/t/t4018/elixir-private-function @@ -0,0 +1,5 @@ +defp function(RIGHT, arg) do + # comment + # comment + ChangeMe +end diff --git a/t/t4018/elixir-protocol b/t/t4018/elixir-protocol new file mode 100644 index 0000000..7d91736 --- /dev/null +++ b/t/t4018/elixir-protocol @@ -0,0 +1,6 @@ +defprotocol RIGHT do + @doc """ + Calculates the size (and not the length!) of a data structure + """ + def size(data, ChangeMe) +end diff --git a/t/t4018/elixir-protocol-implementation b/t/t4018/elixir-protocol-implementation new file mode 100644 index 0000000..f9234bb --- /dev/null +++ b/t/t4018/elixir-protocol-implementation @@ -0,0 +1,5 @@ +defimpl RIGHT do + # Docs + # Docs + def foo(ChangeMe), do: :ok +end diff --git a/t/t4018/matlab-class-definition b/t/t4018/matlab-class-definition new file mode 100644 index 0000000..84daedf --- /dev/null +++ b/t/t4018/matlab-class-definition @@ -0,0 +1,5 @@ +classdef RIGHT + properties + ChangeMe + end +end diff --git a/t/t4018/matlab-function b/t/t4018/matlab-function new file mode 100644 index 0000000..897a9b1 --- /dev/null +++ b/t/t4018/matlab-function @@ -0,0 +1,4 @@ +function y = RIGHT() +x = 5; +y = ChangeMe + x; +end diff --git a/t/t4018/matlab-octave-section-1 b/t/t4018/matlab-octave-section-1 new file mode 100644 index 0000000..3bb6c46 --- /dev/null +++ b/t/t4018/matlab-octave-section-1 @@ -0,0 +1,3 @@ +%%% RIGHT section +# this is octave script +ChangeMe = 1; diff --git a/t/t4018/matlab-octave-section-2 b/t/t4018/matlab-octave-section-2 new file mode 100644 index 0000000..ab2980f --- /dev/null +++ b/t/t4018/matlab-octave-section-2 @@ -0,0 +1,3 @@ +## RIGHT section +# this is octave script +ChangeMe = 1; diff --git a/t/t4018/matlab-section b/t/t4018/matlab-section new file mode 100644 index 0000000..5ea59a5 --- /dev/null +++ b/t/t4018/matlab-section @@ -0,0 +1,3 @@ +%% RIGHT section +% this is understood by both matlab and octave +ChangeMe = 1; diff --git a/t/t4018/python-async-def b/t/t4018/python-async-def new file mode 100644 index 0000000..87640e0 --- /dev/null +++ b/t/t4018/python-async-def @@ -0,0 +1,4 @@ +async def RIGHT(pi: int = 3.14): + while True: + break + return ChangeMe() diff --git a/t/t4018/python-class b/t/t4018/python-class new file mode 100644 index 0000000..ba9e741 --- /dev/null +++ b/t/t4018/python-class @@ -0,0 +1,4 @@ +class RIGHT(int, str): + # comment + # another comment + # ChangeMe diff --git a/t/t4018/python-def b/t/t4018/python-def new file mode 100644 index 0000000..e50b31b --- /dev/null +++ b/t/t4018/python-def @@ -0,0 +1,4 @@ +def RIGHT(pi: int = 3.14): + while True: + break + return ChangeMe() diff --git a/t/t4018/python-indented-async-def b/t/t4018/python-indented-async-def new file mode 100644 index 0000000..f5d0325 --- /dev/null +++ b/t/t4018/python-indented-async-def @@ -0,0 +1,7 @@ +class Foo: + async def RIGHT(self, x: int): + return [ + 1, + 2, + ChangeMe, + ] diff --git a/t/t4018/python-indented-class b/t/t4018/python-indented-class new file mode 100644 index 0000000..19b4f35 --- /dev/null +++ b/t/t4018/python-indented-class @@ -0,0 +1,5 @@ +if TYPE_CHECKING: + class RIGHT: + # comment + # another comment + # ChangeMe diff --git a/t/t4018/python-indented-def b/t/t4018/python-indented-def new file mode 100644 index 0000000..208fbad --- /dev/null +++ b/t/t4018/python-indented-def @@ -0,0 +1,7 @@ +class Foo: + def RIGHT(self, x: int): + return [ + 1, + 2, + ChangeMe, + ] diff --git a/t/t4018/rust-fn b/t/t4018/rust-fn new file mode 100644 index 0000000..cbe0215 --- /dev/null +++ b/t/t4018/rust-fn @@ -0,0 +1,5 @@ +pub(self) fn RIGHT<T>(x: &[T]) where T: Debug { + let _ = x; + // a comment + let a = ChangeMe; +} diff --git a/t/t4018/rust-impl b/t/t4018/rust-impl new file mode 100644 index 0000000..09df3cd --- /dev/null +++ b/t/t4018/rust-impl @@ -0,0 +1,5 @@ +impl<'a, T: AsRef<[u8]>> std::RIGHT for Git<'a> { + + pub fn ChangeMe(&self) -> () { + } +} diff --git a/t/t4018/rust-struct b/t/t4018/rust-struct new file mode 100644 index 0000000..76aff1c --- /dev/null +++ b/t/t4018/rust-struct @@ -0,0 +1,5 @@ +#[derive(Debug)] +pub(super) struct RIGHT<'a> { + name: &'a str, + age: ChangeMe, +} diff --git a/t/t4018/rust-trait b/t/t4018/rust-trait new file mode 100644 index 0000000..ea397f0 --- /dev/null +++ b/t/t4018/rust-trait @@ -0,0 +1,5 @@ +unsafe trait RIGHT<T> { + fn len(&self) -> u32; + fn ChangeMe(&self, n: u32) -> T; + fn iter<F>(&self, f: F) where F: Fn(T); +} diff --git a/t/t4026-color.sh b/t/t4026-color.sh index 671e951..c0b642c 100755 --- a/t/t4026-color.sh +++ b/t/t4026-color.sh @@ -30,6 +30,14 @@ test_expect_success 'attribute before color name' ' color "bold red" "[1;31m" ' +test_expect_success 'aixterm bright fg color' ' + color "brightred" "[91m" +' + +test_expect_success 'aixterm bright bg color' ' + color "green brightblue" "[32;104m" +' + test_expect_success 'color name before attribute' ' color "red bold" "[1;31m" ' @@ -74,6 +82,10 @@ test_expect_success '0-7 are aliases for basic ANSI color names' ' color "0 7" "[30;47m" ' +test_expect_success '8-15 are aliases for aixterm color names' ' + color "12 13" "[94;105m" +' + test_expect_success '256 colors' ' color "254 bold 255" "[1;38;5;254;48;5;255m" ' diff --git a/t/t4027-diff-submodule.sh b/t/t4027-diff-submodule.sh index 9aa8e2b..e29deaf 100755 --- a/t/t4027-diff-submodule.sh +++ b/t/t4027-diff-submodule.sh @@ -6,6 +6,7 @@ test_description='difference in submodules' . "$TEST_DIRECTORY"/diff-lib.sh test_expect_success setup ' + test_oid_init && test_tick && test_create_repo sub && ( @@ -36,7 +37,8 @@ test_expect_success setup ' ' test_expect_success 'git diff --raw HEAD' ' - git diff --raw --abbrev=40 HEAD >actual && + hexsz=$(test_oid hexsz) && + git diff --raw --abbrev=$hexsz HEAD >actual && test_cmp expect actual ' @@ -245,23 +247,21 @@ test_expect_success 'git diff (empty submodule dir)' ' ' test_expect_success 'conflicted submodule setup' ' - - # 39 efs - c=fffffffffffffffffffffffffffffffffffffff && + c=$(test_oid ff_1) && ( echo "000000 $ZERO_OID 0 sub" && echo "160000 1$c 1 sub" && echo "160000 2$c 2 sub" && echo "160000 3$c 3 sub" ) | git update-index --index-info && - echo >expect.nosub '\''diff --cc sub + echo >expect.nosub "diff --cc sub index 2ffffff,3ffffff..0000000 --- a/sub +++ b/sub @@@ -1,1 -1,1 +1,1 @@@ -- Subproject commit 2fffffffffffffffffffffffffffffffffffffff - -Subproject commit 3fffffffffffffffffffffffffffffffffffffff -++Subproject commit 0000000000000000000000000000000000000000'\'' && +- Subproject commit 2$c + -Subproject commit 3$c +++Subproject commit $ZERO_OID" && hh=$(git rev-parse HEAD) && sed -e "s/$ZERO_OID/$hh/" expect.nosub >expect.withsub diff --git a/t/t4034-diff-words.sh b/t/t4034-diff-words.sh index 912df91..fb145aa 100755 --- a/t/t4034-diff-words.sh +++ b/t/t4034-diff-words.sh @@ -19,9 +19,11 @@ cat >post.simple <<-\EOF aeff = aeff * ( aaa ) EOF -cat >expect.letter-runs-are-words <<-\EOF +pre=$(git rev-parse --short $(git hash-object pre.simple)) +post=$(git rev-parse --short $(git hash-object post.simple)) +cat >expect.letter-runs-are-words <<-EOF <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -33,9 +35,9 @@ cat >expect.letter-runs-are-words <<-\EOF <GREEN>aeff = aeff * ( aaa<RESET> ) EOF -cat >expect.non-whitespace-is-word <<-\EOF +cat >expect.non-whitespace-is-word <<-EOF <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -49,9 +51,12 @@ cat >expect.non-whitespace-is-word <<-\EOF EOF word_diff () { + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && test_must_fail git diff --no-index "$@" pre post >output && test_decode_color <output >output.decrypted && - test_cmp expect output.decrypted + sed -e "2s/index [^ ]*/index $pre..$post/" expect >expected + test_cmp expected output.decrypted } test_language_driver () { @@ -77,9 +82,9 @@ test_expect_success 'set up pre and post with runs of whitespace' ' ' test_expect_success 'word diff with runs of whitespace' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -97,9 +102,9 @@ test_expect_success 'word diff with runs of whitespace' ' ' test_expect_success '--word-diff=porcelain' ' - sed 's/#.*$//' >expect <<-\EOF && + sed 's/#.*$//' >expect <<-EOF && diff --git a/pre b/post - index 330b04f..5ed8eff 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1,3 +1,7 @@ @@ -121,9 +126,9 @@ test_expect_success '--word-diff=porcelain' ' ' test_expect_success '--word-diff=plain' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && diff --git a/pre b/post - index 330b04f..5ed8eff 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1,3 +1,7 @@ @@ -140,9 +145,9 @@ test_expect_success '--word-diff=plain' ' ' test_expect_success '--word-diff=plain --color' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -158,9 +163,9 @@ test_expect_success '--word-diff=plain --color' ' ' test_expect_success 'word diff without context' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -207,9 +212,9 @@ test_expect_success 'command-line overrides config' ' ' test_expect_success 'command-line overrides config: --word-diff-regex' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -234,9 +239,9 @@ test_expect_success 'setup: remove diff driver regex' ' ' test_expect_success 'use configured regex' ' - cat >expect <<-\EOF && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 330b04f..5ed8eff 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1,3 +1,7 @@<RESET> @@ -254,9 +259,11 @@ test_expect_success 'use configured regex' ' test_expect_success 'test parsing words for newline' ' echo "aaa (aaa)" >pre && echo "aaa (aaa) aaa" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index c29453b..be22f37 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -268,9 +275,11 @@ test_expect_success 'test parsing words for newline' ' test_expect_success 'test when words are only removed at the end' ' echo "(:" >pre && echo "(" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && <BOLD>diff --git a/pre b/post<RESET> - <BOLD>index 289cb9d..2d06f37 100644<RESET> + <BOLD>index $pre..$post 100644<RESET> <BOLD>--- a/pre<RESET> <BOLD>+++ b/post<RESET> <CYAN>@@ -1 +1 @@<RESET> @@ -282,9 +291,11 @@ test_expect_success 'test when words are only removed at the end' ' test_expect_success '--word-diff=none' ' echo "(:" >pre && echo "(" >post && - cat >expect <<-\EOF && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && diff --git a/pre b/post - index 289cb9d..2d06f37 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1 +1 @@ @@ -303,6 +314,7 @@ test_language_driver bibtex test_language_driver cpp test_language_driver csharp test_language_driver css +test_language_driver dts test_language_driver fortran test_language_driver html test_language_driver java @@ -316,16 +328,6 @@ test_language_driver ruby test_language_driver tex test_expect_success 'word-diff with diff.sbe' ' - cat >expect <<-\EOF && - diff --git a/pre b/post - index a1a53b5..bc8fe6d 100644 - --- a/pre - +++ b/post - @@ -1,3 +1,3 @@ - a - - [-b-]{+c+} - EOF cat >pre <<-\EOF && a @@ -336,21 +338,35 @@ test_expect_success 'word-diff with diff.sbe' ' c EOF + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && + diff --git a/pre b/post + index $pre..$post 100644 + --- a/pre + +++ b/post + @@ -1,3 +1,3 @@ + a + + [-b-]{+c+} + EOF test_config diff.suppress-blank-empty true && word_diff --word-diff=plain ' test_expect_success 'word-diff with no newline at EOF' ' - cat >expect <<-\EOF && + printf "%s" "a a a a a" >pre && + printf "%s" "a a ab a a" >post && + pre=$(git rev-parse --short $(git hash-object pre)) && + post=$(git rev-parse --short $(git hash-object post)) && + cat >expect <<-EOF && diff --git a/pre b/post - index 7bf316e..3dd0303 100644 + index $pre..$post 100644 --- a/pre +++ b/post @@ -1 +1 @@ a a [-a-]{+ab+} a a EOF - printf "%s" "a a a a a" >pre && - printf "%s" "a a ab a a" >post && word_diff --word-diff=plain ' diff --git a/t/t4034/dts/expect b/t/t4034/dts/expect new file mode 100644 index 0000000..560fc99 --- /dev/null +++ b/t/t4034/dts/expect @@ -0,0 +1,37 @@ +<BOLD>diff --git a/pre b/post<RESET> +<BOLD>index b6a9051..7803aee 100644<RESET> +<BOLD>--- a/pre<RESET> +<BOLD>+++ b/post<RESET> +<CYAN>@@ -1,32 +1,32 @@<RESET> +/ {<RESET> + <RED>this_handle<RESET><GREEN>HANDLE_2<RESET>: <RED>node<RESET><GREEN>new-node<RESET>@<RED>f00<RESET><GREEN>eeda<RESET> { + compatible = "<RED>mydev<RESET><GREEN>vendor,compat<RESET>"; + string-prop = <RED>start<RESET><GREEN>end<RESET>: "hello <RED>world!<RESET><GREEN>world?<RESET>" <RED>end<RESET><GREEN>start<RESET>: ; + <RED>#size-cells<RESET><GREEN>#address-cells<RESET> = <<RED>0+0<RESET><GREEN>0+40<RESET>>; + reg = <<RED>0xf00<RESET><GREEN>0xeeda<RESET>>; + prop = <<GREEN>(<RESET>1<GREEN>)<RESET>>; + prop = <<GREEN>(<RESET>-1e10<GREEN>)<RESET>>; + prop = <(!<RED>3<RESET><GREEN>1<RESET>)>; + prop = <(~<RED>3<RESET><GREEN>1<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>*<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>*<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>/<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>%<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3+4<RESET><GREEN>1+2<RESET>)>; + prop = <(<RED>3-4<RESET><GREEN>1-2<RESET>)>; + prop = /bits/ <RED>64<RESET><GREEN>32<RESET> <(<RED>3<RESET><GREEN>1<RESET><<<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>>><RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>^<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>|<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>&&<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>3<RESET><GREEN>1<RESET>||<RED>4<RESET><GREEN>2<RESET>)>; + prop = <(<RED>4?5<RESET><GREEN>1?2<RESET>:3)>; + list = <&<RED>this_handle<RESET><GREEN>HANDLE_2<RESET>>, <0 0 0 <RED>0<RESET><GREEN>1<RESET>>; + };<RESET> + + &<RED>phandle<RESET><GREEN>phandle2<RESET> { + <RED>pre-phandle<RESET><GREEN>prop_handle<RESET> = <&<RED>this_handle<RESET><GREEN>HANDLE_2<RESET>>; + };<RESET> +};<RESET> diff --git a/t/t4034/dts/post b/t/t4034/dts/post new file mode 100644 index 0000000..7803aee --- /dev/null +++ b/t/t4034/dts/post @@ -0,0 +1,32 @@ +/ { + HANDLE_2: new-node@eeda { + compatible = "vendor,compat"; + string-prop = end: "hello world?" start: ; + #address-cells = <0+40>; + reg = <0xeeda>; + prop = <(1)>; + prop = <(-1e10)>; + prop = <(!1)>; + prop = <(~1)>; + prop = <(1*2)>; + prop = <(1&2)>; + prop = <(1*2)>; + prop = <(1/2)>; + prop = <(1%2)>; + prop = <(1+2)>; + prop = <(1-2)>; + prop = /bits/ 32 <(1<<2)>; + prop = <(1>>2)>; + prop = <(1&2)>; + prop = <(1^2)>; + prop = <(1|2)>; + prop = <(1&&2)>; + prop = <(1||2)>; + prop = <(1?2:3)>; + list = <&HANDLE_2>, <0 0 0 1>; + }; + + &phandle2 { + prop_handle = <&HANDLE_2>; + }; +}; diff --git a/t/t4034/dts/pre b/t/t4034/dts/pre new file mode 100644 index 0000000..b6a9051 --- /dev/null +++ b/t/t4034/dts/pre @@ -0,0 +1,32 @@ +/ { + this_handle: node@f00 { + compatible = "mydev"; + string-prop = start: "hello world!" end: ; + #size-cells = <0+0>; + reg = <0xf00>; + prop = <1>; + prop = <-1e10>; + prop = <(!3)>; + prop = <(~3)>; + prop = <(3*4)>; + prop = <(3&4)>; + prop = <(3*4)>; + prop = <(3/4)>; + prop = <(3%4)>; + prop = <(3+4)>; + prop = <(3-4)>; + prop = /bits/ 64 <(3<<4)>; + prop = <(3>>4)>; + prop = <(3&4)>; + prop = <(3^4)>; + prop = <(3|4)>; + prop = <(3&&4)>; + prop = <(3||4)>; + prop = <(4?5:3)>; + list = <&this_handle>, <0 0 0 0>; + }; + + &phandle { + pre-phandle = <&this_handle>; + }; +}; diff --git a/t/t4038-diff-combined.sh b/t/t4038-diff-combined.sh index e2824d3..9468083 100755 --- a/t/t4038-diff-combined.sh +++ b/t/t4038-diff-combined.sh @@ -354,7 +354,7 @@ test_expect_failure 'combine diff coalesce three parents' ' ' # Test for a bug reported at -# https://public-inbox.org/git/20130515143508.GO25742@login.drsnuggles.stderr.nl/ +# https://lore.kernel.org/git/20130515143508.GO25742@login.drsnuggles.stderr.nl/ # where a delete lines were missing from combined diff output when they # occurred exactly before the context lines of a later change. test_expect_success 'combine diff missing delete bug' ' @@ -435,4 +435,99 @@ test_expect_success 'combine diff gets tree sorting right' ' test_cmp expect actual ' +test_expect_success 'setup for --combined-all-paths' ' + git branch side1c && + git branch side2c && + git checkout side1c && + test_seq 1 10 >filename-side1c && + side1cf=$(git hash-object filename-side1c) && + git add filename-side1c && + git commit -m with && + git checkout side2c && + test_seq 1 9 >filename-side2c && + echo ten >>filename-side2c && + side2cf=$(git hash-object filename-side2c) && + git add filename-side2c && + git commit -m iam && + git checkout -b mergery side1c && + git merge --no-commit side2c && + git rm filename-side1c && + echo eleven >>filename-side2c && + git mv filename-side2c filename-merged && + mergedf=$(git hash-object filename-merged) && + git add filename-merged && + git commit +' + +test_expect_success '--combined-all-paths and --raw' ' + cat <<-EOF >expect && + ::100644 100644 100644 $side1cf $side2cf $mergedf RR filename-side1c filename-side2c filename-merged + EOF + git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success '--combined-all-paths and --cc' ' + cat <<-\EOF >expect && + --- a/filename-side1c + --- a/filename-side2c + +++ b/filename-merged + EOF + git diff-tree --cc -M --combined-all-paths HEAD >actual.tmp && + grep ^[-+][-+][-+] <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES 'setup for --combined-all-paths with funny names' ' + git branch side1d && + git branch side2d && + git checkout side1d && + test_seq 1 10 >"$(printf "file\twith\ttabs")" && + git add file* && + side1df=$(git hash-object *tabs) && + git commit -m with && + git checkout side2d && + test_seq 1 9 >"$(printf "i\tam\ttabbed")" && + echo ten >>"$(printf "i\tam\ttabbed")" && + git add *tabbed && + side2df=$(git hash-object *tabbed) && + git commit -m iam && + git checkout -b funny-names-mergery side1d && + git merge --no-commit side2d && + git rm *tabs && + echo eleven >>"$(printf "i\tam\ttabbed")" && + git mv "$(printf "i\tam\ttabbed")" "$(printf "fickle\tnaming")" && + git add fickle* && + headf=$(git hash-object fickle*) && + git commit && + head=$(git rev-parse HEAD) +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --raw and funny names' ' + cat <<-EOF >expect && + ::100644 100644 100644 $side1df $side2df $headf RR "file\twith\ttabs" "i\tam\ttabbed" "fickle\tnaming" + EOF + git diff-tree -c -M --raw --combined-all-paths HEAD >actual.tmp && + sed 1d <actual.tmp >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --raw -and -z and funny names' ' + printf "$head\0::100644 100644 100644 $side1df $side2df $headf RR\0file\twith\ttabs\0i\tam\ttabbed\0fickle\tnaming\0" >expect && + git diff-tree -c -M --raw --combined-all-paths -z HEAD >actual && + test_cmp expect actual +' + +test_expect_success FUNNYNAMES '--combined-all-paths and --cc and funny names' ' + cat <<-\EOF >expect && + --- "a/file\twith\ttabs" + --- "a/i\tam\ttabbed" + +++ "b/fickle\tnaming" + EOF + git diff-tree --cc -M --combined-all-paths HEAD >actual.tmp && + grep ^[-+][-+][-+] <actual.tmp >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4039-diff-assume-unchanged.sh b/t/t4039-diff-assume-unchanged.sh index 53ac44b..0eb0314 100755 --- a/t/t4039-diff-assume-unchanged.sh +++ b/t/t4039-diff-assume-unchanged.sh @@ -12,6 +12,7 @@ test_expect_success 'setup' ' git commit -m zero && echo one > one && echo two > two && + blob=$(git hash-object one) && git add one two && git commit -m onetwo && git update-index --assume-unchanged one && @@ -20,7 +21,7 @@ test_expect_success 'setup' ' ' test_expect_success 'diff-index does not examine assume-unchanged entries' ' - git diff-index HEAD^ -- one | grep -q 5626abf0f72e58d7a153368ba57db4c673c0e171 + git diff-index HEAD^ -- one | grep -q $blob ' test_expect_success 'diff-files does not examine assume-unchanged entries' ' diff --git a/t/t4041-diff-submodule-option.sh b/t/t4041-diff-submodule-option.sh index 619bf97..f852136 100755 --- a/t/t4041-diff-submodule-option.sh +++ b/t/t4041-diff-submodule-option.sh @@ -284,7 +284,7 @@ test_expect_success 'submodule contains untracked content (all ignored)' ' test_must_be_empty actual ' -test_expect_success 'submodule contains untracked and modifed content' ' +test_expect_success 'submodule contains untracked and modified content' ' echo new > sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -294,7 +294,7 @@ test_expect_success 'submodule contains untracked and modifed content' ' test_cmp expected actual ' -test_expect_success 'submodule contains untracked and modifed content (untracked ignored)' ' +test_expect_success 'submodule contains untracked and modified content (untracked ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -303,19 +303,19 @@ test_expect_success 'submodule contains untracked and modifed content (untracked test_cmp expected actual ' -test_expect_success 'submodule contains untracked and modifed content (dirty ignored)' ' +test_expect_success 'submodule contains untracked and modified content (dirty ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'submodule contains untracked and modifed content (all ignored)' ' +test_expect_success 'submodule contains untracked and modified content (all ignored)' ' echo new > sm1/foo6 && git diff-index -p --ignore-submodules --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'submodule contains modifed content' ' +test_expect_success 'submodule contains modified content' ' rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -369,7 +369,7 @@ test_expect_success 'modified submodule contains untracked content (all ignored) test_must_be_empty actual ' -test_expect_success 'modified submodule contains untracked and modifed content' ' +test_expect_success 'modified submodule contains untracked and modified content' ' echo modification >> sm1/foo6 && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -381,7 +381,7 @@ test_expect_success 'modified submodule contains untracked and modifed content' test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (untracked ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (untracked ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=untracked --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -392,7 +392,7 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (dirty ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (dirty ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=log HEAD >actual && cat >expected <<-EOF && @@ -402,13 +402,13 @@ test_expect_success 'modified submodule contains untracked and modifed content ( test_cmp expected actual ' -test_expect_success 'modified submodule contains untracked and modifed content (all ignored)' ' +test_expect_success 'modified submodule contains untracked and modified content (all ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules --submodule=log HEAD >actual && test_must_be_empty actual ' -test_expect_success 'modified submodule contains modifed content' ' +test_expect_success 'modified submodule contains modified content' ' rm -f sm1/new-file && git diff-index -p --submodule=log HEAD >actual && cat >expected <<-EOF && diff --git a/t/t4044-diff-index-unique-abbrev.sh b/t/t4044-diff-index-unique-abbrev.sh index 647905e..4701796 100755 --- a/t/t4044-diff-index-unique-abbrev.sh +++ b/t/t4044-diff-index-unique-abbrev.sh @@ -3,34 +3,48 @@ test_description='test unique sha1 abbreviation on "index from..to" line' . ./test-lib.sh -if ! test_have_prereq SHA1 -then - skip_all='not using SHA-1 for objects' - test_done -fi - -cat >expect_initial <<EOF -100644 blob 51d2738463ea4ca66f8691c91e33ce64b7d41bb1 foo -EOF +test_expect_success 'setup' ' + test_oid_cache <<-EOF && + val1 sha1:4827 + val1 sha256:5664 -cat >expect_update <<EOF -100644 blob 51d2738efb4ad8a1e40bed839ab8e116f0a15e47 foo -EOF + val2 sha1:11742 + val2 sha256:10625 -test_expect_success 'setup' ' - echo 4827 > foo && + hash1 sha1:51d2738463ea4ca66f8691c91e33ce64b7d41bb1 + hash1 sha256:ae31dfff0af93b2c62b0098a039b38569c43b0a7e97b873000ca42d128f27350 + + hasht1 sha1:51d27384 + hasht1 sha256:ae31dfff + + hash2 sha1:51d2738efb4ad8a1e40bed839ab8e116f0a15e47 + hash2 sha256:ae31dffada88a46fd5f53c7ed5aa25a7a8951f1d5e88456c317c8d5484d263e5 + + hasht2 sha1:51d2738e + hasht2 sha256:ae31dffa + EOF + + cat >expect_initial <<-EOF && + 100644 blob $(test_oid hash1) foo + EOF + + cat >expect_update <<-EOF && + 100644 blob $(test_oid hash2) foo + EOF + + echo "$(test_oid val1)" > foo && git add foo && git commit -m "initial" && git cat-file -p HEAD: > actual && test_cmp expect_initial actual && - echo 11742 > foo && + echo "$(test_oid val2)" > foo && git commit -a -m "update" && git cat-file -p HEAD: > actual && test_cmp expect_update actual ' cat >expect <<EOF -index 51d27384..51d2738e 100644 +index $(test_oid hasht1)..$(test_oid hasht2) 100644 EOF test_expect_success 'diff does not produce ambiguous index line' ' diff --git a/t/t4045-diff-relative.sh b/t/t4045-diff-relative.sh index 36f8ed8..2588087 100755 --- a/t/t4045-diff-relative.sh +++ b/t/t4045-diff-relative.sh @@ -70,7 +70,7 @@ check_raw () { expect=$1 shift cat >expected <<-EOF - :000000 100644 0000000000000000000000000000000000000000 $blob A $expect + :000000 100644 $ZERO_OID $blob A $expect EOF test_expect_success "--raw $*" " git -C '$dir' diff --no-abbrev --raw $* HEAD^ >actual && diff --git a/t/t4048-diff-combined-binary.sh b/t/t4048-diff-combined-binary.sh index 87a8949..7f9ad9f 100755 --- a/t/t4048-diff-combined-binary.sh +++ b/t/t4048-diff-combined-binary.sh @@ -9,24 +9,27 @@ test_expect_success 'setup binary merge conflict' ' git commit -m one && echo twoQ2 | q_to_nul >binary && git commit -a -m two && + two=$(git rev-parse --short HEAD:binary) && git checkout -b branch-binary HEAD^ && echo threeQ3 | q_to_nul >binary && git commit -a -m three && + three=$(git rev-parse --short HEAD:binary) && test_must_fail git merge master && echo resolvedQhooray | q_to_nul >binary && - git commit -a -m resolved + git commit -a -m resolved && + res=$(git rev-parse --short HEAD:binary) ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/binary b/binary -index 7ea6ded..9563691 100644 +index $three..$res 100644 Binary files a/binary and b/binary differ resolved diff --git a/binary b/binary -index 6197570..9563691 100644 +index $two..$res 100644 Binary files a/binary and b/binary differ EOF test_expect_success 'diff -m indicates binary-ness' ' @@ -34,11 +37,11 @@ test_expect_success 'diff -m indicates binary-ness' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined binary -index 7ea6ded,6197570..9563691 +index $three,$two..$res Binary files differ EOF test_expect_success 'diff -c indicates binary-ness' ' @@ -46,11 +49,11 @@ test_expect_success 'diff -c indicates binary-ness' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc binary -index 7ea6ded,6197570..9563691 +index $three,$two..$res Binary files differ EOF test_expect_success 'diff --cc indicates binary-ness' ' @@ -62,23 +65,26 @@ test_expect_success 'setup non-binary with binary attribute' ' git checkout master && test_commit one text && test_commit two text && + two=$(git rev-parse --short HEAD:text) && git checkout -b branch-text HEAD^ && test_commit three text && + three=$(git rev-parse --short HEAD:text) && test_must_fail git merge master && test_commit resolved text && + res=$(git rev-parse --short HEAD:text) && echo text -diff >.gitattributes ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/text b/text -index 2bdf67a..2ab19ae 100644 +index $three..$res 100644 Binary files a/text and b/text differ resolved diff --git a/text b/text -index f719efd..2ab19ae 100644 +index $two..$res 100644 Binary files a/text and b/text differ EOF test_expect_success 'diff -m respects binary attribute' ' @@ -86,11 +92,11 @@ test_expect_success 'diff -m respects binary attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res Binary files differ EOF test_expect_success 'diff -c respects binary attribute' ' @@ -98,11 +104,11 @@ test_expect_success 'diff -c respects binary attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res Binary files differ EOF test_expect_success 'diff --cc respects binary attribute' ' @@ -115,11 +121,11 @@ test_expect_success 'setup textconv attribute' ' git config diff.upcase.textconv "tr a-z A-Z <" ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --git a/text b/text -index 2bdf67a..2ab19ae 100644 +index $three..$res 100644 --- a/text +++ b/text @@ -1 +1 @@ @@ -128,7 +134,7 @@ index 2bdf67a..2ab19ae 100644 resolved diff --git a/text b/text -index f719efd..2ab19ae 100644 +index $two..$res 100644 --- a/text +++ b/text @@ -1 +1 @@ @@ -140,11 +146,11 @@ test_expect_success 'diff -m respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -157,11 +163,11 @@ test_expect_success 'diff -c respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF resolved diff --cc text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -174,9 +180,9 @@ test_expect_success 'diff --cc respects textconv attribute' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF diff --combined text -index 2bdf67a,f719efd..2ab19ae +index $three,$two..$res --- a/text +++ b/text @@@ -1,1 -1,1 +1,1 @@@ @@ -190,9 +196,9 @@ test_expect_success 'diff-tree plumbing does not respect textconv' ' test_cmp expect actual ' -cat >expect <<'EOF' +cat >expect <<EOF diff --cc text -index 2bdf67a,f719efd..0000000 +index $three,$two..0000000 --- a/text +++ b/text @@@ -1,1 -1,1 +1,5 @@@ diff --git a/t/t4053-diff-no-index.sh b/t/t4053-diff-no-index.sh index 6e0dd6f..0168946 100755 --- a/t/t4053-diff-no-index.sh +++ b/t/t4053-diff-no-index.sh @@ -50,8 +50,7 @@ test_expect_success 'git diff --no-index executed outside repo gives correct err export GIT_CEILING_DIRECTORIES && cd non/git && test_must_fail git diff --no-index a 2>actual.err && - echo "usage: git diff --no-index <path> <path>" >expect.err && - test_cmp expect.err actual.err + test_i18ngrep "usage: git diff --no-index" actual.err ) ' @@ -137,4 +136,12 @@ test_expect_success 'diff --no-index from repo subdir with absolute paths' ' test_cmp expect actual ' +test_expect_success 'diff --no-index allows external diff' ' + test_expect_code 1 \ + env GIT_EXTERNAL_DIFF="echo external ;:" \ + git diff --no-index non/git/a non/git/b >actual && + echo external >expect && + test_cmp expect actual +' + test_done diff --git a/t/t4054-diff-bogus-tree.sh b/t/t4054-diff-bogus-tree.sh index fcae82f..8c95f15 100755 --- a/t/t4054-diff-bogus-tree.sh +++ b/t/t4054-diff-bogus-tree.sh @@ -4,8 +4,9 @@ test_description='test diff with a bogus tree containing the null sha1' . ./test-lib.sh test_expect_success 'create bogus tree' ' + name=$(echo $ZERO_OID | sed -e "s/00/Q/g") && bogus_tree=$( - printf "100644 fooQQQQQQQQQQQQQQQQQQQQQ" | + printf "100644 fooQ$name" | q_to_nul | git hash-object -w --stdin -t tree ) diff --git a/t/t4057-diff-combined-paths.sh b/t/t4057-diff-combined-paths.sh index dff36b7..4f4b541 100755 --- a/t/t4057-diff-combined-paths.sh +++ b/t/t4057-diff-combined-paths.sh @@ -33,7 +33,7 @@ test_expect_success 'trivial merge - combine-diff empty' ' ' -test_expect_success 'only one trully conflicting path' ' +test_expect_success 'only one truly conflicting path' ' git checkout side && for i in $(test_seq 2 9) do diff --git a/t/t4060-diff-submodule-option-diff-format.sh b/t/t4060-diff-submodule-option-diff-format.sh index 9dcb69d..fc8229c 100755 --- a/t/t4060-diff-submodule-option-diff-format.sh +++ b/t/t4060-diff-submodule-option-diff-format.sh @@ -42,6 +42,17 @@ commit_file () { git commit "$@" -m "Commit $*" >/dev/null } +diff_cmp () { + for i in "$1" "$2" + do + sed -e 's/^index 0000000\.\.[0-9a-f]*/index 0000000..1234567/' \ + -e 's/^index [0-9a-f]*\.\.[0-9a-f]*/index 1234567..89abcde/' \ + "$i" >"$i.compare" || return 1 + done && + test_cmp "$1.compare" "$2.compare" && + rm -f "$1.compare" "$2.compare" +} + test_expect_success 'setup repository' ' test_create_repo sm1 && add_file . foo && @@ -69,7 +80,7 @@ test_expect_success 'added submodule' ' @@ -0,0 +1 @@ +foo2 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'added submodule, set diff.submodule' ' @@ -93,7 +104,7 @@ test_expect_success 'added submodule, set diff.submodule' ' @@ -0,0 +1 @@ +foo2 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success '--submodule=short overrides diff.submodule' ' @@ -109,7 +120,7 @@ test_expect_success '--submodule=short overrides diff.submodule' ' @@ -0,0 +1 @@ +Subproject commit $fullhead1 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'diff.submodule does not affect plumbing' ' @@ -124,7 +135,7 @@ test_expect_success 'diff.submodule does not affect plumbing' ' @@ -0,0 +1 @@ +Subproject commit $fullhead1 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -142,7 +153,7 @@ test_expect_success 'modified submodule(forward)' ' @@ -0,0 +1 @@ +foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule(forward)' ' @@ -157,7 +168,7 @@ test_expect_success 'modified submodule(forward)' ' @@ -0,0 +1 @@ +foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule(forward) --submodule' ' @@ -166,7 +177,7 @@ test_expect_success 'modified submodule(forward) --submodule' ' Submodule sm1 $head1..$head2: > Add foo3 ($added foo3) EOF - test_cmp expected actual + diff_cmp expected actual ' fullhead2=$(cd sm1; git rev-parse --verify HEAD) @@ -181,7 +192,7 @@ test_expect_success 'modified submodule(forward) --submodule=short' ' -Subproject commit $fullhead1 +Subproject commit $fullhead2 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -210,7 +221,7 @@ test_expect_success 'modified submodule(backward)' ' @@ -1 +0,0 @@ -foo3 EOF - test_cmp expected actual + diff_cmp expected actual ' head4=$(add_file sm1 foo4 foo5) @@ -247,7 +258,7 @@ test_expect_success 'modified submodule(backward and forward)' ' @@ -0,0 +1 @@ +foo5 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && @@ -291,7 +302,7 @@ test_expect_success 'typechanged submodule(submodule->blob), --cached' ' @@ -0,0 +1 @@ +sm1 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -327,7 +338,7 @@ test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -0,0 +1 @@ +foo5 EOF - test_cmp expected actual + diff_cmp expected actual ' rm -rf sm1 && @@ -344,7 +355,7 @@ test_expect_success 'typechanged submodule(submodule->blob)' ' @@ -0,0 +1 @@ +sm1 EOF - test_cmp expected actual + diff_cmp expected actual ' rm -f sm1 && @@ -356,7 +367,7 @@ test_expect_success 'nonexistent commit' ' cat >expected <<-EOF && Submodule sm1 $head4...$head6 (commits not present) EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file @@ -386,11 +397,12 @@ test_expect_success 'typechanged submodule(blob->submodule)' ' @@ -0,0 +1 @@ +foo7 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm1 && test_expect_success 'submodule is up to date' ' + head7=$(git -C sm1 rev-parse --short --verify HEAD) && git diff-index -p --submodule=diff HEAD >actual && test_must_be_empty actual ' @@ -401,7 +413,7 @@ test_expect_success 'submodule contains untracked content' ' cat >expected <<-EOF && Submodule sm1 contains untracked content EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'submodule contains untracked content (untracked ignored)' ' @@ -433,7 +445,7 @@ test_expect_success 'submodule contains untracked and modified content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' # NOT OK @@ -450,7 +462,7 @@ test_expect_success 'submodule contains untracked and modified content (untracke -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'submodule contains untracked and modified content (dirty ignored)' ' @@ -478,7 +490,7 @@ test_expect_success 'submodule contains modified content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' (cd sm1; git commit -mchange foo6 >/dev/null) && @@ -486,7 +498,7 @@ head8=$(cd sm1; git rev-parse --short --verify HEAD) && test_expect_success 'submodule is modified' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -495,7 +507,7 @@ test_expect_success 'submodule is modified' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content' ' @@ -503,7 +515,7 @@ test_expect_success 'modified submodule contains untracked content' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains untracked content - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -512,13 +524,13 @@ test_expect_success 'modified submodule contains untracked content' ' -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (untracked ignored)' ' git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..$head8: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -527,13 +539,13 @@ test_expect_success 'modified submodule contains untracked content (untracked ig -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (dirty ignored)' ' git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -542,7 +554,7 @@ test_expect_success 'modified submodule contains untracked content (dirty ignore -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked content (all ignored)' ' @@ -556,7 +568,7 @@ test_expect_success 'modified submodule contains untracked and modified content' cat >expected <<-EOF && Submodule sm1 contains untracked content Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..dfda541 100644 --- a/sm1/foo6 @@ -566,7 +578,7 @@ test_expect_success 'modified submodule contains untracked and modified content' +new +modification EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (untracked ignored)' ' @@ -574,7 +586,7 @@ test_expect_success 'modified submodule contains untracked and modified content git diff-index -p --ignore-submodules=untracked --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..e20e2d9 100644 --- a/sm1/foo6 @@ -585,14 +597,14 @@ test_expect_success 'modified submodule contains untracked and modified content +modification +modification EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (dirty ignored)' ' echo modification >> sm1/foo6 && git diff-index -p --ignore-submodules=dirty --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..3e75765 100644 --- a/sm1/foo6 @@ -601,7 +613,7 @@ test_expect_success 'modified submodule contains untracked and modified content -foo6 +new EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'modified submodule contains untracked and modified content (all ignored)' ' @@ -616,7 +628,7 @@ test_expect_success 'modified submodule contains modified content' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && Submodule sm1 contains modified content - Submodule sm1 17243c9..cfce562: + Submodule sm1 $head7..$head8: diff --git a/sm1/foo6 b/sm1/foo6 index 462398b..ac466ca 100644 --- a/sm1/foo6 @@ -629,29 +641,29 @@ test_expect_success 'modified submodule contains modified content' ' +modification +modification EOF - test_cmp expected actual + diff_cmp expected actual ' rm -rf sm1 test_expect_success 'deleted submodule' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) + Submodule sm1 $head7...0000000 (submodule deleted) EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'create second submodule' ' test_create_repo sm2 && - head7=$(add_file sm2 foo8 foo9) && + head9=$(add_file sm2 foo8 foo9) && git add sm2 ' test_expect_success 'multiple submodules' ' git diff-index -p --submodule=diff HEAD >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -667,13 +679,13 @@ test_expect_success 'multiple submodules' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'path filter' ' git diff-index -p --submodule=diff HEAD sm2 >actual && cat >expected <<-EOF && - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -689,15 +701,15 @@ test_expect_success 'path filter' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' commit_file sm2 test_expect_success 'given commit' ' git diff-index -p --submodule=diff HEAD^ >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -713,7 +725,7 @@ test_expect_success 'given commit' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'setup .git file for sm2' ' @@ -726,8 +738,8 @@ test_expect_success 'setup .git file for sm2' ' test_expect_success 'diff --submodule=diff with .git file' ' git diff --submodule=diff HEAD^ >actual && cat >expected <<-EOF && - Submodule sm1 17243c9...0000000 (submodule deleted) - Submodule sm2 0000000...a5a65c9 (new submodule) + Submodule sm1 $head7...0000000 (submodule deleted) + Submodule sm2 0000000...$head9 (new submodule) diff --git a/sm2/foo8 b/sm2/foo8 new file mode 100644 index 0000000..db9916b @@ -743,25 +755,27 @@ test_expect_success 'diff --submodule=diff with .git file' ' @@ -0,0 +1 @@ +foo9 EOF - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'setup nested submodule' ' git submodule add -f ./sm2 && git commit -a -m "add sm2" && git -C sm2 submodule add ../sm2 nested && - git -C sm2 commit -a -m "nested sub" + git -C sm2 commit -a -m "nested sub" && + head10=$(git -C sm2 rev-parse --short --verify HEAD) ' test_expect_success 'move nested submodule HEAD' ' echo "nested content" >sm2/nested/file && git -C sm2/nested add file && - git -C sm2/nested commit --allow-empty -m "new HEAD" + git -C sm2/nested commit --allow-empty -m "new HEAD" && + head11=$(git -C sm2/nested rev-parse --short --verify HEAD) ' test_expect_success 'diff --submodule=diff with moved nested submodule HEAD' ' cat >expected <<-EOF && - Submodule nested a5a65c9..b55928c: + Submodule nested $head9..$head11: diff --git a/nested/file b/nested/file new file mode 100644 index 0000000..ca281f5 @@ -772,13 +786,13 @@ test_expect_success 'diff --submodule=diff with moved nested submodule HEAD' ' EOF git -C sm2 diff --submodule=diff >actual 2>err && test_must_be_empty err && - test_cmp expected actual + diff_cmp expected actual ' test_expect_success 'diff --submodule=diff recurses into nested submodules' ' cat >expected <<-EOF && Submodule sm2 contains modified content - Submodule sm2 a5a65c9..280969a: + Submodule sm2 $head9..$head10: diff --git a/sm2/.gitmodules b/sm2/.gitmodules new file mode 100644 index 0000000..3a816b8 @@ -788,7 +802,7 @@ test_expect_success 'diff --submodule=diff recurses into nested submodules' ' +[submodule "nested"] + path = nested + url = ../sm2 - Submodule nested 0000000...b55928c (new submodule) + Submodule nested 0000000...$head11 (new submodule) diff --git a/sm2/nested/file b/sm2/nested/file new file mode 100644 index 0000000..ca281f5 @@ -813,7 +827,7 @@ test_expect_success 'diff --submodule=diff recurses into nested submodules' ' EOF git diff --submodule=diff >actual 2>err && test_must_be_empty err && - test_cmp expected actual + diff_cmp expected actual ' test_done diff --git a/t/t4066-diff-emit-delay.sh b/t/t4066-diff-emit-delay.sh new file mode 100755 index 0000000..6331f63 --- /dev/null +++ b/t/t4066-diff-emit-delay.sh @@ -0,0 +1,79 @@ +#!/bin/sh + +test_description='test combined/stat/moved interaction' +. ./test-lib.sh + +# This test covers a weird 3-way interaction between "--cc -p", which will run +# the combined diff code, along with "--stat", which will be computed as a +# first-parent stat during the combined diff, and "--color-moved", which +# enables the emitted_symbols list to store the diff in memory. + +test_expect_success 'set up history with a merge' ' + test_commit A && + test_commit B && + git checkout -b side HEAD^ && + test_commit C && + git merge -m M master && + test_commit D +' + +test_expect_success 'log --cc -p --stat --color-moved' ' + cat >expect <<-EOF && + commit D + --- + D.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/D.t b/D.t + new file mode 100644 + index 0000000..$(git rev-parse --short D:D.t) + --- /dev/null + +++ b/D.t + @@ -0,0 +1 @@ + +D + commit M + + B.t | 1 + + 1 file changed, 1 insertion(+) + commit C + --- + C.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/C.t b/C.t + new file mode 100644 + index 0000000..$(git rev-parse --short C:C.t) + --- /dev/null + +++ b/C.t + @@ -0,0 +1 @@ + +C + commit B + --- + B.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/B.t b/B.t + new file mode 100644 + index 0000000..$(git rev-parse --short B:B.t) + --- /dev/null + +++ b/B.t + @@ -0,0 +1 @@ + +B + commit A + --- + A.t | 1 + + 1 file changed, 1 insertion(+) + + diff --git a/A.t b/A.t + new file mode 100644 + index 0000000..$(git rev-parse --short A:A.t) + --- /dev/null + +++ b/A.t + @@ -0,0 +1 @@ + +A + EOF + git log --format="commit %s" --cc -p --stat --color-moved >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4067-diff-partial-clone.sh b/t/t4067-diff-partial-clone.sh new file mode 100755 index 0000000..4831ad3 --- /dev/null +++ b/t/t4067-diff-partial-clone.sh @@ -0,0 +1,134 @@ +#!/bin/sh + +test_description='behavior of diff when reading objects in a partial clone' + +. ./test-lib.sh + +test_expect_success 'git show batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client show HEAD && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'diff batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + echo c >server/c && + echo d >server/d && + git -C server add c d && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_expect_success 'diff skips same-OID blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + echo b >server/b && + git -C server add a b && + git -C server commit -m x && + echo another-a >server/a && + git -C server add a && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + echo a | git hash-object --stdin >hash-old-a && + echo another-a | git hash-object --stdin >hash-new-a && + echo b | git hash-object --stdin >hash-b && + + # Ensure that only a and another-a are fetched. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "want $(cat hash-old-a)" trace && + grep "want $(cat hash-new-a)" trace && + ! grep "want $(cat hash-b)" trace +' + +test_expect_success 'when fetching missing objects, diff skips GITLINKs' ' + test_when_finished "rm -rf sub server client trace" && + + test_create_repo sub && + test_commit -C sub first && + + test_create_repo server && + echo a >server/a && + git -C server add a && + git -C server submodule add "file://$(pwd)/sub" && + git -C server commit -m x && + + test_commit -C server/sub second && + echo another-a >server/a && + git -C server add a sub && + git -C server commit -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + echo a | git hash-object --stdin >hash-old-a && + echo another-a | git hash-object --stdin >hash-new-a && + + # Ensure that a and another-a are fetched, and check (by successful + # execution of the diff) that no invalid OIDs are sent. + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff HEAD^ HEAD && + grep "want $(cat hash-old-a)" trace && + grep "want $(cat hash-new-a)" trace +' + +test_expect_success 'diff with rename detection batches blobs' ' + test_when_finished "rm -rf server client trace" && + + test_create_repo server && + echo a >server/a && + printf "b\nb\nb\nb\nb\n" >server/b && + git -C server add a b && + git -C server commit -m x && + rm server/b && + printf "b\nb\nb\nb\nbX\n" >server/c && + git -C server add c && + git -C server commit -a -m x && + + test_config -C server uploadpack.allowfilter 1 && + test_config -C server uploadpack.allowanysha1inwant 1 && + git clone --bare --filter=blob:limit=0 "file://$(pwd)/server" client && + + # Ensure that there is exactly 1 negotiation by checking that there is + # only 1 "done" line sent. ("done" marks the end of negotiation.) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client diff -M HEAD^ HEAD >out && + grep "similarity index" out && + grep "git> done" trace >done_lines && + test_line_count = 1 done_lines +' + +test_done diff --git a/t/t4100/t-apply-1.patch b/t/t4100/t-apply-1.patch index 90ab54f..43394f8 100644 --- a/t/t4100/t-apply-1.patch +++ b/t/t4100/t-apply-1.patch @@ -75,8 +75,8 @@ diff --git a/Documentation/git.txt b/Documentation/git.txt +link:git-ssh-pull.html[git-ssh-pull]:: Pulls from a remote repository over ssh connection - Interogators: -@@ -156,8 +156,8 @@ Interogators: + Interrogators: +@@ -156,8 +156,8 @@ Interrogators: link:git-diff-helper.html[git-diff-helper]:: Generates patch format output for git-diff-* diff --git a/t/t4100/t-apply-3.patch b/t/t4100/t-apply-3.patch index 90cdbaa..cac172e 100644 --- a/t/t4100/t-apply-3.patch +++ b/t/t4100/t-apply-3.patch @@ -211,7 +211,7 @@ dissimilarity index 82% - - /* If this is an exact directory match, we may have - * directory files following this path. Match on them. -- * Otherwise, we're at a pach subcomponent, and we need +- * Otherwise, we're at a patch subcomponent, and we need - * to try to match again. - */ - if (mtype == 0) diff --git a/t/t4100/t-apply-5.patch b/t/t4100/t-apply-5.patch index 5f6ddc1..57ec79d 100644 --- a/t/t4100/t-apply-5.patch +++ b/t/t4100/t-apply-5.patch @@ -185,8 +185,8 @@ diff a/Documentation/git.txt b/Documentation/git.txt +link:git-ssh-pull.html[git-ssh-pull]:: Pulls from a remote repository over ssh connection - Interogators: -@@ -156,8 +156,8 @@ Interogators: + Interrogators: +@@ -156,8 +156,8 @@ Interrogators: link:git-diff-helper.html[git-diff-helper]:: Generates patch format output for git-diff-* diff --git a/t/t4100/t-apply-7.patch b/t/t4100/t-apply-7.patch index 07c6589..fa24305 100644 --- a/t/t4100/t-apply-7.patch +++ b/t/t4100/t-apply-7.patch @@ -335,7 +335,7 @@ diff a/ls-tree.c b/ls-tree.c - /* If this is an exact directory match, we may have - * directory files following this path. Match on them. -- * Otherwise, we're at a pach subcomponent, and we need +- * Otherwise, we're at a patch subcomponent, and we need - * to try to match again. + if (e->directory) { + /* If this is a directory, we have the following cases: diff --git a/t/t4108-apply-threeway.sh b/t/t4108-apply-threeway.sh index fa5d4ef..d7349ce 100755 --- a/t/t4108-apply-threeway.sh +++ b/t/t4108-apply-threeway.sh @@ -4,23 +4,17 @@ test_description='git apply --3way' . ./test-lib.sh -create_file () { - for i - do - echo "$i" - done -} - -sanitize_conflicted_diff () { +print_sanitized_conflicted_diff () { + git diff HEAD >diff.raw && sed -e ' /^index /d - s/^\(+[<>][<>][<>][<>]*\) .*/\1/ - ' + s/^\(+[<>|][<>|][<>|][<>|]*\) .*/\1/ + ' diff.raw } test_expect_success setup ' test_tick && - create_file >one 1 2 3 4 5 6 7 && + test_write_lines 1 2 3 4 5 6 7 >one && cat one >two && git add one two && git commit -m initial && @@ -28,13 +22,13 @@ test_expect_success setup ' git branch side && test_tick && - create_file >one 1 two 3 4 5 six 7 && - create_file >two 1 two 3 4 5 6 7 && + test_write_lines 1 two 3 4 5 six 7 >one && + test_write_lines 1 two 3 4 5 6 7 >two && git commit -a -m master && git checkout side && - create_file >one 1 2 3 4 five 6 7 && - create_file >two 1 2 3 4 five 6 7 && + test_write_lines 1 2 3 4 five 6 7 >one && + test_write_lines 1 2 3 4 five 6 7 >two && git commit -a -m side && git checkout master @@ -52,7 +46,7 @@ test_expect_success 'apply without --3way' ' git diff-index --exit-code --cached HEAD ' -test_expect_success 'apply with --3way' ' +test_apply_with_3way () { # Merging side should be similar to applying this patch git diff ...side >P.diff && @@ -61,22 +55,31 @@ test_expect_success 'apply with --3way' ' git checkout master^0 && test_must_fail git merge --no-commit side && git ls-files -s >expect.ls && - git diff HEAD | sanitize_conflicted_diff >expect.diff && + print_sanitized_conflicted_diff >expect.diff && # should fail to apply git reset --hard && git checkout master^0 && test_must_fail git apply --index --3way P.diff && git ls-files -s >actual.ls && - git diff HEAD | sanitize_conflicted_diff >actual.diff && + print_sanitized_conflicted_diff >actual.diff && # The result should resemble the corresponding merge test_cmp expect.ls actual.ls && test_cmp expect.diff actual.diff +} + +test_expect_success 'apply with --3way' ' + test_apply_with_3way +' + +test_expect_success 'apply with --3way with merge.conflictStyle = diff3' ' + test_config merge.conflictStyle diff3 && + test_apply_with_3way ' test_expect_success 'apply with --3way with rerere enabled' ' - git config rerere.enabled true && + test_config rerere.enabled true && # Merging side should be similar to applying this patch git diff ...side >P.diff && @@ -87,7 +90,7 @@ test_expect_success 'apply with --3way with rerere enabled' ' test_must_fail git merge --no-commit side && # Manually resolve and record the resolution - create_file 1 two 3 4 five six 7 >one && + test_write_lines 1 two 3 4 five six 7 >one && git rerere && cat one >expect && @@ -104,14 +107,14 @@ test_expect_success 'apply -3 with add/add conflict setup' ' git reset --hard && git checkout -b adder && - create_file 1 2 3 4 5 6 7 >three && - create_file 1 2 3 4 5 6 7 >four && + test_write_lines 1 2 3 4 5 6 7 >three && + test_write_lines 1 2 3 4 5 6 7 >four && git add three four && git commit -m "add three and four" && git checkout -b another adder^ && - create_file 1 2 3 4 5 6 7 >three && - create_file 1 2 3 four 5 6 7 >four && + test_write_lines 1 2 3 4 5 6 7 >three && + test_write_lines 1 2 3 four 5 6 7 >four && git add three four && git commit -m "add three and four" && @@ -121,7 +124,7 @@ test_expect_success 'apply -3 with add/add conflict setup' ' git checkout adder^0 && test_must_fail git merge --no-commit another && git ls-files -s >expect.ls && - git diff HEAD | sanitize_conflicted_diff >expect.diff + print_sanitized_conflicted_diff >expect.diff ' test_expect_success 'apply -3 with add/add conflict' ' @@ -131,7 +134,7 @@ test_expect_success 'apply -3 with add/add conflict' ' test_must_fail git apply --index --3way P.diff && # ... and leave conflicts in the index and in the working tree git ls-files -s >actual.ls && - git diff HEAD | sanitize_conflicted_diff >actual.diff && + print_sanitized_conflicted_diff >actual.diff && # The result should resemble the corresponding merge test_cmp expect.ls actual.ls && diff --git a/t/t4117-apply-reject.sh b/t/t4117-apply-reject.sh index f7de6f0..0ee93fe 100755 --- a/t/t4117-apply-reject.sh +++ b/t/t4117-apply-reject.sh @@ -74,7 +74,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' test_must_fail git apply --reject patch.1 && test_cmp expected file1 && - cat file1.rej && + test_path_is_file file1.rej && test_path_is_missing file2.rej ' @@ -87,7 +87,7 @@ test_expect_success 'apply with --reject should fail but update the file' ' test_path_is_missing file1 && test_cmp expected file2 && - cat file2.rej && + test_path_is_file file2.rej && test_path_is_missing file1.rej ' @@ -101,7 +101,7 @@ test_expect_success 'the same test with --verbose' ' test_path_is_missing file1 && test_cmp expected file2 && - cat file2.rej && + test_path_is_file file2.rej && test_path_is_missing file1.rej ' diff --git a/t/t4124-apply-ws-rule.sh b/t/t4124-apply-ws-rule.sh index ff51e9e..971a5a7 100755 --- a/t/t4124-apply-ws-rule.sh +++ b/t/t4124-apply-ws-rule.sh @@ -35,9 +35,15 @@ prepare_test_file () { } apply_patch () { + cmd_prefix= && + if test "x$1" = 'x!' + then + cmd_prefix=test_must_fail && + shift + fi && >target && sed -e "s|\([ab]\)/file|\1/target|" <patch | - git apply "$@" + $cmd_prefix git apply "$@" } test_fix () { @@ -99,7 +105,7 @@ test_expect_success 'whitespace=warn, default rule' ' test_expect_success 'whitespace=error-all, default rule' ' - test_must_fail apply_patch --whitespace=error-all && + apply_patch ! --whitespace=error-all && test_must_be_empty target ' diff --git a/t/t4134-apply-submodule.sh b/t/t4134-apply-submodule.sh index 0043930..99ed4cc 100755 --- a/t/t4134-apply-submodule.sh +++ b/t/t4134-apply-submodule.sh @@ -8,6 +8,7 @@ test_description='git apply submodule tests' . ./test-lib.sh test_expect_success setup ' + test_oid_init && cat > create-sm.patch <<EOF && diff --git a/dir/sm b/dir/sm new file mode 160000 @@ -15,7 +16,7 @@ index 0000000..0123456 --- /dev/null +++ b/dir/sm @@ -0,0 +1 @@ -+Subproject commit 0123456789abcdef0123456789abcdef01234567 ++Subproject commit $(test_oid numeric) EOF cat > remove-sm.patch <<EOF diff --git a/dir/sm b/dir/sm @@ -24,7 +25,7 @@ index 0123456..0000000 --- a/dir/sm +++ /dev/null @@ -1 +0,0 @@ --Subproject commit 0123456789abcdef0123456789abcdef01234567 +-Subproject commit $(test_oid numeric) EOF ' diff --git a/t/t4138-apply-ws-expansion.sh b/t/t4138-apply-ws-expansion.sh index 3b636a6..b19faeb 100755 --- a/t/t4138-apply-ws-expansion.sh +++ b/t/t4138-apply-ws-expansion.sh @@ -17,8 +17,8 @@ test_expect_success setup ' printf "\t%s\n" 1 2 3 >after && printf "%64s\n" a b c >>after && printf "\t%s\n" 4 5 6 >>after && - git diff --no-index before after | - sed -e "s/before/test-1/" -e "s/after/test-1/" >patch1.patch && + test_expect_code 1 git diff --no-index before after >patch1.patch.raw && + sed -e "s/before/test-1/" -e "s/after/test-1/" patch1.patch.raw >patch1.patch && printf "%64s\n" 1 2 3 4 5 6 >test-1 && printf "%64s\n" 1 2 3 a b c 4 5 6 >expect-1 && @@ -33,8 +33,8 @@ test_expect_success setup ' x=$(( $x + 1 )) done && printf "\t%s\n" d e f >>after && - git diff --no-index before after | - sed -e "s/before/test-2/" -e "s/after/test-2/" >patch2.patch && + test_expect_code 1 git diff --no-index before after >patch2.patch.raw && + sed -e "s/before/test-2/" -e "s/after/test-2/" patch2.patch.raw >patch2.patch && printf "%64s\n" a b c d e f >test-2 && printf "%64s\n" a b c >expect-2 && x=1 && @@ -56,8 +56,8 @@ test_expect_success setup ' x=$(( $x + 1 )) done && printf "\t%s\n" d e f >>after && - git diff --no-index before after | - sed -e "s/before/test-3/" -e "s/after/test-3/" >patch3.patch && + test_expect_code 1 git diff --no-index before after >patch3.patch.raw && + sed -e "s/before/test-3/" -e "s/after/test-3/" patch3.patch.raw >patch3.patch && printf "%64s\n" a b c d e f >test-3 && printf "%64s\n" a b c >expect-3 && x=0 && @@ -84,8 +84,8 @@ test_expect_success setup ' printf "\t%02d\n" $x >>after x=$(( $x + 1 )) done && - git diff --no-index before after | - sed -e "s/before/test-4/" -e "s/after/test-4/" >patch4.patch && + test_expect_code 1 git diff --no-index before after >patch4.patch.raw && + sed -e "s/before/test-4/" -e "s/after/test-4/" patch4.patch.raw >patch4.patch && >test-4 && x=0 && while test $x -lt 50 diff --git a/t/t4150-am.sh b/t/t4150-am.sh index 55b577d..cb45271 100755 --- a/t/t4150-am.sh +++ b/t/t4150-am.sh @@ -77,14 +77,12 @@ test_expect_success 'setup: messages' ' printf "Subject: " >subject-prefix && - cat - subject-prefix msg-without-scissors-line >msg-with-scissors-line <<-\EOF && + cat - subject-prefix msg-without-scissors-line >msg-with-scissors-line <<-\EOF This line should not be included in the commit message with --scissors enabled. - - >8 - - remove everything above this line - - >8 - - EOF - - signoff="Signed-off-by: $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL>" ' test_expect_success setup ' @@ -668,6 +666,26 @@ test_expect_success 'am --show-current-patch' ' test_cmp .git/rebase-apply/0001 actual.patch ' +test_expect_success 'am --show-current-patch=raw' ' + git am --show-current-patch=raw >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + +test_expect_success 'am --show-current-patch=diff' ' + git am --show-current-patch=diff >actual.patch && + test_cmp .git/rebase-apply/patch actual.patch +' + +test_expect_success 'am accepts repeated --show-current-patch' ' + git am --show-current-patch --show-current-patch=raw >actual.patch && + test_cmp .git/rebase-apply/0001 actual.patch +' + +test_expect_success 'am detects incompatible --show-current-patch' ' + test_must_fail git am --show-current-patch=raw --show-current-patch=diff && + test_must_fail git am --show-current-patch --show-current-patch=diff +' + test_expect_success 'am --skip works' ' echo goodbye >expected && git am --skip && @@ -1063,4 +1081,56 @@ test_expect_success 'am --quit keeps HEAD where it is' ' test_cmp expected actual ' +test_expect_success 'am and .gitattibutes' ' + test_create_repo attributes && + ( + cd attributes && + test_commit init && + git config filter.test.clean "sed -e '\''s/smudged/clean/g'\''" && + git config filter.test.smudge "sed -e '\''s/clean/smudged/g'\''" && + + test_commit second && + git checkout -b test HEAD^ && + + echo "*.txt filter=test conflict-marker-size=10" >.gitattributes && + git add .gitattributes && + test_commit third && + + echo "This text is smudged." >a.txt && + git add a.txt && + test_commit fourth && + + git checkout -b removal HEAD^ && + git rm .gitattributes && + git add -u && + test_commit fifth && + git cherry-pick test && + + git checkout -b conflict third && + echo "This text is different." >a.txt && + git add a.txt && + test_commit sixth && + + git checkout test && + git format-patch --stdout master..HEAD >patches && + git reset --hard master && + git am patches && + grep "smudged" a.txt && + + git checkout removal && + git reset --hard && + git format-patch --stdout master..HEAD >patches && + git reset --hard master && + git am patches && + grep "clean" a.txt && + + git checkout conflict && + git reset --hard && + git format-patch --stdout master..HEAD >patches && + git reset --hard fourth && + test_must_fail git am -3 patches && + grep "<<<<<<<<<<" a.txt + ) +' + test_done diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh index 55b7750..831d424 100755 --- a/t/t4200-rerere.sh +++ b/t/t4200-rerere.sh @@ -25,6 +25,7 @@ test_description='git rerere . ./test-lib.sh test_expect_success 'setup' ' + test_oid_init && cat >a1 <<-\EOF && Some title ========== @@ -210,7 +211,7 @@ test_expect_success 'set up for garbage collection tests' ' echo Hello >$rr/preimage && echo World >$rr/postimage && - sha2=4000000000000000000000000000000000000000 && + sha2=$(test_oid deadbeef) && rr2=.git/rr-cache/$sha2 && mkdir $rr2 && echo Hello >$rr2/preimage && diff --git a/t/t4202-log.sh b/t/t4202-log.sh index 819c24d..0f766ba 100755 --- a/t/t4202-log.sh +++ b/t/t4202-log.sh @@ -5,6 +5,11 @@ test_description='git log' . ./test-lib.sh . "$TEST_DIRECTORY/lib-gpg.sh" . "$TEST_DIRECTORY/lib-terminal.sh" +. "$TEST_DIRECTORY/lib-log-graph.sh" + +test_cmp_graph () { + lib_test_cmp_graph --format=%s "$@" +} test_expect_success setup ' @@ -87,12 +92,12 @@ test_expect_success 'format %w(,1,2)' ' ' cat > expect << EOF -804a787 sixth -394ef78 fifth -5d31159 fourth -2fbe8c0 third -f7dab8e second -3a2fdcb initial +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth +$(git rev-parse --short :/fourth ) fourth +$(git rev-parse --short :/third ) third +$(git rev-parse --short :/second ) second +$(git rev-parse --short :/initial) initial EOF test_expect_success 'oneline' ' @@ -173,43 +178,45 @@ test_expect_success 'git config log.follow is overridden by --no-follow' ' verbose test "$actual" = "$expect" ' +# Note that these commits are intentionally listed out of order. +last_three="$(git rev-parse :/fourth :/sixth :/fifth)" cat > expect << EOF -804a787 sixth -394ef78 fifth -5d31159 fourth +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth +$(git rev-parse --short :/fourth) fourth EOF test_expect_success 'git log --no-walk <commits> sorts by commit time' ' - git log --no-walk --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk --oneline $last_three > actual && test_cmp expect actual ' test_expect_success 'git log --no-walk=sorted <commits> sorts by commit time' ' - git log --no-walk=sorted --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk=sorted --oneline $last_three > actual && test_cmp expect actual ' cat > expect << EOF -=== 804a787 sixth -=== 394ef78 fifth -=== 5d31159 fourth +=== $(git rev-parse --short :/sixth ) sixth +=== $(git rev-parse --short :/fifth ) fifth +=== $(git rev-parse --short :/fourth) fourth EOF test_expect_success 'git log --line-prefix="=== " --no-walk <commits> sorts by commit time' ' - git log --line-prefix="=== " --no-walk --oneline 5d31159 804a787 394ef78 > actual && + git log --line-prefix="=== " --no-walk --oneline $last_three > actual && test_cmp expect actual ' cat > expect << EOF -5d31159 fourth -804a787 sixth -394ef78 fifth +$(git rev-parse --short :/fourth) fourth +$(git rev-parse --short :/sixth ) sixth +$(git rev-parse --short :/fifth ) fifth EOF test_expect_success 'git log --no-walk=unsorted <commits> leaves list of commits as given' ' - git log --no-walk=unsorted --oneline 5d31159 804a787 394ef78 > actual && + git log --no-walk=unsorted --oneline $last_three > actual && test_cmp expect actual ' test_expect_success 'git show <commits> leaves list of commits as given' ' - git show --oneline -s 5d31159 804a787 394ef78 > actual && + git show --oneline -s $last_three > actual && test_cmp expect actual ' @@ -352,7 +359,7 @@ test_expect_success 'log with grep.patternType configuration and command line' ' test_cmp expect actual ' -test_expect_success 'log with various grep.patternType configurations & command-lines' ' +test_expect_success !FAIL_PREREQS 'log with various grep.patternType configurations & command-lines' ' git init pattern-type && ( cd pattern-type && @@ -450,8 +457,7 @@ cat > expect <<EOF EOF test_expect_success 'simple log --graph' ' - git log --graph --pretty=tformat:%s >actual && - test_cmp expect actual + test_cmp_graph ' cat > expect <<EOF @@ -465,8 +471,7 @@ cat > expect <<EOF EOF test_expect_success 'simple log --graph --line-prefix="123 "' ' - git log --graph --line-prefix="123 " --pretty=tformat:%s >actual && - test_cmp expect actual + test_cmp_graph --line-prefix="123 " ' test_expect_success 'set up merge history' ' @@ -493,9 +498,7 @@ cat > expect <<\EOF EOF test_expect_success 'log --graph with merge' ' - git log --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --date-order ' cat > expect <<\EOF @@ -514,9 +517,7 @@ cat > expect <<\EOF EOF test_expect_success 'log --graph --line-prefix="| | | " with merge' ' - git log --line-prefix="| | | " --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --line-prefix="| | | " --date-order ' cat > expect.colors <<\EOF @@ -536,9 +537,7 @@ EOF test_expect_success 'log --graph with merge with log.graphColors' ' test_config log.graphColors " blue,invalid-color, cyan, red , " && - git log --color=always --graph --date-order --pretty=tformat:%s | - test_decode_color | sed "s/ *\$//" >actual && - test_cmp expect.colors actual + lib_test_cmp_colored_graph --date-order --format=%s ' test_expect_success 'log --raw --graph -m with merge' ' @@ -667,16 +666,14 @@ cat > expect <<\EOF * | | fifth * | | fourth |/ / -* | third +* / third |/ * second * initial EOF test_expect_success 'log --graph with merge' ' - git log --graph --date-order --pretty=tformat:%s | - sed "s/ *\$//" >actual && - test_cmp expect actual + test_cmp_graph --date-order ' test_expect_success 'log.decorate configuration' ' @@ -837,6 +834,21 @@ test_expect_success 'decorate-refs and decorate-refs-exclude' ' test_cmp expect.decorate actual ' +test_expect_success 'decorate-refs-exclude and simplify-by-decoration' ' + cat >expect.decorate <<-\EOF && + Merge-tag-reach (HEAD -> master) + reach (tag: reach, reach) + seventh (tag: seventh) + Merge-branch-tangle + Merge-branch-side-early-part-into-tangle (tangle) + tangle-a (tag: tangle-a) + EOF + git log -n6 --decorate=short --pretty="tformat:%f%d" \ + --decorate-refs-exclude="*octopus*" \ + --simplify-by-decoration >actual && + test_cmp expect.decorate actual +' + test_expect_success 'log.decorate config parsing' ' git log --oneline --decorate=full >expect.full && git log --oneline --decorate=short >expect.short && @@ -942,7 +954,7 @@ cat >expect <<\EOF | | | | diff --git a/reach.t b/reach.t | | new file mode 100644 -| | index 0000000..10c9591 +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/reach.t | | @@ -0,0 +1 @@ @@ -965,7 +977,7 @@ cat >expect <<\EOF | | | | | | diff --git a/octopus-b.t b/octopus-b.t | | | new file mode 100644 -| | | index 0000000..d5fcad0 +| | | index BEFORE..AFTER | | | --- /dev/null | | | +++ b/octopus-b.t | | | @@ -0,0 +1 @@ @@ -981,7 +993,7 @@ cat >expect <<\EOF | | | | diff --git a/octopus-a.t b/octopus-a.t | | new file mode 100644 -| | index 0000000..11ee015 +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/octopus-a.t | | @@ -0,0 +1 @@ @@ -997,7 +1009,7 @@ cat >expect <<\EOF | | diff --git a/seventh.t b/seventh.t | new file mode 100644 -| index 0000000..9744ffc +| index BEFORE..AFTER | --- /dev/null | +++ b/seventh.t | @@ -0,0 +1 @@ @@ -1031,7 +1043,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/tangle-a b/tangle-a | | | | new file mode 100644 -| | | | index 0000000..7898192 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/tangle-a | | | | @@ -0,0 +1 @@ @@ -1053,7 +1065,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/2 b/2 | | | | new file mode 100644 -| | | | index 0000000..0cfbf08 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/2 | | | | @@ -0,0 +1 @@ @@ -1069,7 +1081,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/1 b/1 | | | | new file mode 100644 -| | | | index 0000000..d00491f +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/1 | | | | @@ -0,0 +1 @@ @@ -1085,7 +1097,7 @@ cat >expect <<\EOF | | | | | | | | diff --git a/one b/one | | | | new file mode 100644 -| | | | index 0000000..9a33383 +| | | | index BEFORE..AFTER | | | | --- /dev/null | | | | +++ b/one | | | | @@ -0,0 +1 @@ @@ -1101,7 +1113,7 @@ cat >expect <<\EOF | | | | | | diff --git a/a/two b/a/two | | | deleted file mode 100644 -| | | index 9245af5..0000000 +| | | index BEFORE..AFTER | | | --- a/a/two | | | +++ /dev/null | | | @@ -1 +0,0 @@ @@ -1117,7 +1129,7 @@ cat >expect <<\EOF | | | | | | diff --git a/a/two b/a/two | | | new file mode 100644 -| | | index 0000000..9245af5 +| | | index BEFORE..AFTER | | | --- /dev/null | | | +++ b/a/two | | | @@ -0,0 +1 @@ @@ -1133,7 +1145,7 @@ cat >expect <<\EOF | | | | diff --git a/ein b/ein | | new file mode 100644 -| | index 0000000..9d7e69f +| | index BEFORE..AFTER | | --- /dev/null | | +++ b/ein | | @@ -0,0 +1 @@ @@ -1150,14 +1162,14 @@ cat >expect <<\EOF | | diff --git a/ichi b/ichi | new file mode 100644 -| index 0000000..9d7e69f +| index BEFORE..AFTER | --- /dev/null | +++ b/ichi | @@ -0,0 +1 @@ | +ichi | diff --git a/one b/one | deleted file mode 100644 -| index 9d7e69f..0000000 +| index BEFORE..AFTER | --- a/one | +++ /dev/null | @@ -1 +0,0 @@ @@ -1172,7 +1184,7 @@ cat >expect <<\EOF | 1 file changed, 1 insertion(+), 1 deletion(-) | | diff --git a/one b/one -| index 5626abf..9d7e69f 100644 +| index BEFORE..AFTER 100644 | --- a/one | +++ b/one | @@ -1 +1 @@ @@ -1189,30 +1201,15 @@ cat >expect <<\EOF diff --git a/one b/one new file mode 100644 - index 0000000..5626abf + index BEFORE..AFTER --- /dev/null +++ b/one @@ -0,0 +1 @@ +one EOF -sanitize_output () { - sed -e 's/ *$//' \ - -e 's/commit [0-9a-f]*$/commit COMMIT_OBJECT_NAME/' \ - -e 's/Merge: [ 0-9a-f]*$/Merge: MERGE_PARENTS/' \ - -e 's/Merge tag.*/Merge HEADS DESCRIPTION/' \ - -e 's/Merge commit.*/Merge HEADS DESCRIPTION/' \ - -e 's/, 0 deletions(-)//' \ - -e 's/, 0 insertions(+)//' \ - -e 's/ 1 files changed, / 1 file changed, /' \ - -e 's/, 1 deletions(-)/, 1 deletion(-)/' \ - -e 's/, 1 insertions(+)/, 1 insertion(+)/' -} - test_expect_success 'log --graph with diff and stats' ' - git log --no-renames --graph --pretty=short --stat -p >actual && - sanitize_output >actual.sanitized <actual && - test_i18ncmp expect actual.sanitized + lib_test_cmp_short_graph --no-renames --stat -p ' cat >expect <<\EOF @@ -1232,7 +1229,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/reach.t b/reach.t *** | | new file mode 100644 -*** | | index 0000000..10c9591 +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/reach.t *** | | @@ -0,0 +1 @@ @@ -1255,7 +1252,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/octopus-b.t b/octopus-b.t *** | | | new file mode 100644 -*** | | | index 0000000..d5fcad0 +*** | | | index BEFORE..AFTER *** | | | --- /dev/null *** | | | +++ b/octopus-b.t *** | | | @@ -0,0 +1 @@ @@ -1271,7 +1268,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/octopus-a.t b/octopus-a.t *** | | new file mode 100644 -*** | | index 0000000..11ee015 +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/octopus-a.t *** | | @@ -0,0 +1 @@ @@ -1287,7 +1284,7 @@ cat >expect <<\EOF *** | *** | diff --git a/seventh.t b/seventh.t *** | new file mode 100644 -*** | index 0000000..9744ffc +*** | index BEFORE..AFTER *** | --- /dev/null *** | +++ b/seventh.t *** | @@ -0,0 +1 @@ @@ -1321,7 +1318,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/tangle-a b/tangle-a *** | | | | new file mode 100644 -*** | | | | index 0000000..7898192 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/tangle-a *** | | | | @@ -0,0 +1 @@ @@ -1343,7 +1340,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/2 b/2 *** | | | | new file mode 100644 -*** | | | | index 0000000..0cfbf08 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/2 *** | | | | @@ -0,0 +1 @@ @@ -1359,7 +1356,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/1 b/1 *** | | | | new file mode 100644 -*** | | | | index 0000000..d00491f +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/1 *** | | | | @@ -0,0 +1 @@ @@ -1375,7 +1372,7 @@ cat >expect <<\EOF *** | | | | *** | | | | diff --git a/one b/one *** | | | | new file mode 100644 -*** | | | | index 0000000..9a33383 +*** | | | | index BEFORE..AFTER *** | | | | --- /dev/null *** | | | | +++ b/one *** | | | | @@ -0,0 +1 @@ @@ -1391,7 +1388,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/a/two b/a/two *** | | | deleted file mode 100644 -*** | | | index 9245af5..0000000 +*** | | | index BEFORE..AFTER *** | | | --- a/a/two *** | | | +++ /dev/null *** | | | @@ -1 +0,0 @@ @@ -1407,7 +1404,7 @@ cat >expect <<\EOF *** | | | *** | | | diff --git a/a/two b/a/two *** | | | new file mode 100644 -*** | | | index 0000000..9245af5 +*** | | | index BEFORE..AFTER *** | | | --- /dev/null *** | | | +++ b/a/two *** | | | @@ -0,0 +1 @@ @@ -1423,7 +1420,7 @@ cat >expect <<\EOF *** | | *** | | diff --git a/ein b/ein *** | | new file mode 100644 -*** | | index 0000000..9d7e69f +*** | | index BEFORE..AFTER *** | | --- /dev/null *** | | +++ b/ein *** | | @@ -0,0 +1 @@ @@ -1440,14 +1437,14 @@ cat >expect <<\EOF *** | *** | diff --git a/ichi b/ichi *** | new file mode 100644 -*** | index 0000000..9d7e69f +*** | index BEFORE..AFTER *** | --- /dev/null *** | +++ b/ichi *** | @@ -0,0 +1 @@ *** | +ichi *** | diff --git a/one b/one *** | deleted file mode 100644 -*** | index 9d7e69f..0000000 +*** | index BEFORE..AFTER *** | --- a/one *** | +++ /dev/null *** | @@ -1 +0,0 @@ @@ -1462,7 +1459,7 @@ cat >expect <<\EOF *** | 1 file changed, 1 insertion(+), 1 deletion(-) *** | *** | diff --git a/one b/one -*** | index 5626abf..9d7e69f 100644 +*** | index BEFORE..AFTER 100644 *** | --- a/one *** | +++ b/one *** | @@ -1 +1 @@ @@ -1479,7 +1476,7 @@ cat >expect <<\EOF *** *** diff --git a/one b/one *** new file mode 100644 -*** index 0000000..5626abf +*** index BEFORE..AFTER *** --- /dev/null *** +++ b/one *** @@ -0,0 +1 @@ @@ -1487,9 +1484,7 @@ cat >expect <<\EOF EOF test_expect_success 'log --line-prefix="*** " --graph with diff and stats' ' - git log --line-prefix="*** " --no-renames --graph --pretty=short --stat -p >actual && - sanitize_output >actual.sanitized <actual && - test_i18ncmp expect actual.sanitized + lib_test_cmp_short_graph --line-prefix="*** " --no-renames --stat -p ' cat >expect <<-\EOF @@ -1511,9 +1506,7 @@ cat >expect <<-\EOF EOF test_expect_success 'log --graph with --name-status' ' - git log --graph --format=%s --name-status tangle..reach >actual && - sanitize_output <actual >actual.sanitized && - test_cmp expect actual.sanitized + test_cmp_graph --name-status tangle..reach ' cat >expect <<-\EOF @@ -1535,9 +1528,7 @@ cat >expect <<-\EOF EOF test_expect_success 'log --graph with --name-only' ' - git log --graph --format=%s --name-only tangle..reach >actual && - sanitize_output <actual >actual.sanitized && - test_cmp expect actual.sanitized + test_cmp_graph --name-only tangle..reach ' test_expect_success 'dotdot is a parent directory' ' @@ -1555,6 +1546,14 @@ test_expect_success GPG 'setup signed branch' ' git commit -S -m signed_commit ' +test_expect_success GPG 'setup signed branch with subkey' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b signed-subkey master && + echo foo >foo && + git add foo && + git commit -SB7227189 -m signed_commit +' + test_expect_success GPGSM 'setup signed branch x509' ' test_when_finished "git reset --hard && git checkout master" && git checkout -b signed-x509 master && @@ -1565,6 +1564,18 @@ test_expect_success GPGSM 'setup signed branch x509' ' git commit -S -m signed_commit ' +test_expect_success GPGSM 'log x509 fingerprint' ' + echo "F8BF62E0693D0694816377099909C779FA23FD65 | " >expect && + git log -n1 --format="%GF | %GP" signed-x509 >actual && + test_cmp expect actual +' + +test_expect_success GPGSM 'log OpenPGP fingerprint' ' + echo "D4BE22311AD3131E5EDA29A461092E85B7227189" > expect && + git log -n1 --format="%GP" signed-subkey >actual && + test_cmp expect actual +' + test_expect_success GPG 'log --graph --show-signature' ' git log --graph --show-signature -n1 signed >actual && grep "^| gpg: Signature made" actual && @@ -1596,6 +1607,26 @@ test_expect_success GPG 'log --graph --show-signature for merged tag' ' grep "^| | gpg: Good signature" actual ' +test_expect_success GPG 'log --graph --show-signature for merged tag in shallow clone' ' + test_when_finished "git reset --hard && git checkout master" && + git checkout -b plain-shallow master && + echo aaa >bar && + git add bar && + git commit -m bar_commit && + git checkout --detach master && + echo bbb >baz && + git add baz && + git commit -m baz_commit && + git tag -s -m signed_tag_msg signed_tag_shallow && + hash=$(git rev-parse HEAD) && + git checkout plain-shallow && + git merge --no-ff -m msg signed_tag_shallow && + git clone --depth 1 --no-local . shallow && + test_when_finished "rm -rf shallow" && + git -C shallow log --graph --show-signature -n1 plain-shallow >actual && + grep "tag signed_tag_shallow names a non-parent $hash" actual +' + test_expect_success GPGSM 'log --graph --show-signature for merged tag x509' ' test_when_finished "git reset --hard && git checkout master" && test_config gpg.format x509 && @@ -1674,10 +1705,10 @@ test_expect_success 'set up --source tests' ' ' test_expect_success 'log --source paints branch names' ' - cat >expect <<-\EOF && - 09e12a9 source-b three - 8e393e1 source-a two - 1ac6c77 source-b one + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-b three + $(git rev-parse --short :/two ) source-a two + $(git rev-parse --short :/one ) source-b one EOF git log --oneline --source source-a source-b >actual && test_cmp expect actual @@ -1685,19 +1716,19 @@ test_expect_success 'log --source paints branch names' ' test_expect_success 'log --source paints tag names' ' git tag -m tagged source-tag && - cat >expect <<-\EOF && - 09e12a9 source-tag three - 8e393e1 source-a two - 1ac6c77 source-tag one + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-tag three + $(git rev-parse --short :/two ) source-a two + $(git rev-parse --short :/one ) source-tag one EOF git log --oneline --source source-tag source-a >actual && test_cmp expect actual ' test_expect_success 'log --source paints symmetric ranges' ' - cat >expect <<-\EOF && - 09e12a9 source-b three - 8e393e1 source-a two + cat >expect <<-EOF && + $(git rev-parse --short :/three) source-b three + $(git rev-parse --short :/two ) source-a two EOF git log --oneline --source source-a...source-b >actual && test_cmp expect actual @@ -1707,4 +1738,11 @@ test_expect_success '--exclude-promisor-objects does not BUG-crash' ' test_must_fail git log --exclude-promisor-objects source-a ' +test_expect_success 'log --end-of-options' ' + git update-ref refs/heads/--source HEAD && + git log --end-of-options --source >actual && + git log >expect && + test_cmp expect actual +' + test_done diff --git a/t/t4203-mailmap.sh b/t/t4203-mailmap.sh index 43b1522..586c3a8 100755 --- a/t/t4203-mailmap.sh +++ b/t/t4203-mailmap.sh @@ -13,8 +13,8 @@ fuzz_blame () { } test_expect_success setup ' - cat >contacts <<-\EOF && - A U Thor <author@example.com> + cat >contacts <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF @@ -33,19 +33,19 @@ test_expect_success 'check-mailmap no arguments' ' ' test_expect_success 'check-mailmap arguments' ' - cat >expect <<-\EOF && - A U Thor <author@example.com> + cat >expect <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF git check-mailmap \ - "A U Thor <author@example.com>" \ + "$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>" \ "nick1 <bugs@company.xx>" >actual && test_cmp expect actual ' test_expect_success 'check-mailmap --stdin' ' - cat >expect <<-\EOF && - A U Thor <author@example.com> + cat >expect <<- EOF && + $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> nick1 <bugs@company.xx> EOF git check-mailmap --stdin <contacts >actual && @@ -66,8 +66,8 @@ test_expect_success 'check-mailmap bogus contact' ' test_must_fail git check-mailmap bogus ' -cat >expect <<\EOF -A U Thor (1): +cat >expect << EOF +$GIT_AUTHOR_NAME (1): initial nick1 (1): @@ -90,7 +90,7 @@ nick1 (1): EOF test_expect_success 'default .mailmap' ' - echo "Repo Guy <author@example.com>" > .mailmap && + echo "Repo Guy <$GIT_AUTHOR_EMAIL>" > .mailmap && git shortlog HEAD >actual && test_cmp expect actual ' @@ -122,7 +122,7 @@ Internal Guy (1): EOF test_expect_success 'mailmap.file override' ' - echo "External Guy <author@example.com>" >> internal_mailmap/.mailmap && + echo "External Guy <$GIT_AUTHOR_EMAIL>" >> internal_mailmap/.mailmap && git config mailmap.file internal_mailmap/.mailmap && git shortlog HEAD >actual && test_cmp expect actual @@ -178,8 +178,8 @@ test_expect_success 'name entry after email entry, case-insensitive' ' test_cmp expect actual ' -cat >expect <<\EOF -A U Thor (1): +cat >expect << EOF +$GIT_AUTHOR_NAME (1): initial nick1 (1): @@ -195,18 +195,18 @@ test_expect_success 'No mailmap files, but configured' ' test_expect_success 'setup mailmap blob tests' ' git checkout -b map && test_when_finished "git checkout master" && - cat >just-bugs <<-\EOF && + cat >just-bugs <<- EOF && Blob Guy <bugs@company.xx> EOF - cat >both <<-\EOF && - Blob Guy <author@example.com> + cat >both <<- EOF && + Blob Guy <$GIT_AUTHOR_EMAIL> Blob Guy <bugs@company.xx> EOF - printf "Tricky Guy <author@example.com>" >no-newline && + printf "Tricky Guy <$GIT_AUTHOR_EMAIL>" >no-newline && git add just-bugs both no-newline && git commit -m "my mailmaps" && - echo "Repo Guy <author@example.com>" >.mailmap && - echo "Internal Guy <author@example.com>" >internal.map + echo "Repo Guy <$GIT_AUTHOR_EMAIL>" >.mailmap && + echo "Internal Guy <$GIT_AUTHOR_EMAIL>" >internal.map ' test_expect_success 'mailmap.blob set' ' @@ -266,12 +266,12 @@ test_expect_success 'mailmap.blob defaults to off in non-bare repo' ' git init non-bare && ( cd non-bare && - test_commit one .mailmap "Fake Name <author@example.com>" && + test_commit one .mailmap "Fake Name <$GIT_AUTHOR_EMAIL>" && echo " 1 Fake Name" >expect && git shortlog -ns HEAD >actual && test_cmp expect actual && rm .mailmap && - echo " 1 A U Thor" >expect && + echo " 1 $GIT_AUTHOR_NAME" >expect && git shortlog -ns HEAD >actual && test_cmp expect actual ) @@ -305,26 +305,26 @@ test_expect_success 'cleanup after mailmap.blob tests' ' ' test_expect_success 'single-character name' ' - echo " 1 A <author@example.com>" >expect && + echo " 1 A <$GIT_AUTHOR_EMAIL>" >expect && echo " 1 nick1 <bugs@company.xx>" >>expect && - echo "A <author@example.com>" >.mailmap && + echo "A <$GIT_AUTHOR_EMAIL>" >.mailmap && test_when_finished "rm .mailmap" && git shortlog -es HEAD >actual && test_cmp expect actual ' test_expect_success 'preserve canonical email case' ' - echo " 1 A U Thor <AUTHOR@example.com>" >expect && + echo " 1 $GIT_AUTHOR_NAME <AUTHOR@example.com>" >expect && echo " 1 nick1 <bugs@company.xx>" >>expect && - echo "<AUTHOR@example.com> <author@example.com>" >.mailmap && + echo "<AUTHOR@example.com> <$GIT_AUTHOR_EMAIL>" >.mailmap && test_when_finished "rm .mailmap" && git shortlog -es HEAD >actual && test_cmp expect actual ' # Extended mailmap configurations should give us the following output for shortlog -cat >expect <<\EOF -A U Thor <author@example.com> (1): +cat >expect << EOF +$GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> (1): initial CTO <cto@company.xx> (1): @@ -370,7 +370,7 @@ test_expect_success 'Shortlog output (complex mapping)' ' git commit --author "CTO <cto@coompany.xx>" -m seventh && mkdir -p internal_mailmap && - echo "Committed <committer@example.com>" > internal_mailmap/.mailmap && + echo "Committed <$GIT_COMMITTER_EMAIL>" > internal_mailmap/.mailmap && echo "<cto@company.xx> <cto@coompany.xx>" >> internal_mailmap/.mailmap && echo "Some Dude <some@dude.xx> nick1 <bugs@company.xx>" >> internal_mailmap/.mailmap && echo "Other Author <other@author.xx> nick2 <bugs@company.xx>" >> internal_mailmap/.mailmap && @@ -384,27 +384,27 @@ test_expect_success 'Shortlog output (complex mapping)' ' ' # git log with --pretty format which uses the name and email mailmap placemarkers -cat >expect <<\EOF +cat >expect << EOF Author CTO <cto@coompany.xx> maps to CTO <cto@company.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author claus <me@company.xx> maps to Santa Claus <santa.claus@northpole.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author santa <me@company.xx> maps to Santa Claus <santa.claus@northpole.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick2 <nick2@company.xx> maps to Other Author <other@author.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick2 <bugs@company.xx> maps to Other Author <other@author.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> Author nick1 <bugs@company.xx> maps to Some Dude <some@dude.xx> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> -Author A U Thor <author@example.com> maps to A U Thor <author@example.com> -Committer C O Mitter <committer@example.com> maps to Committed <committer@example.com> +Author $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> maps to $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> +Committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> maps to Committed <$GIT_COMMITTER_EMAIL> EOF test_expect_success 'Log output (complex mapping)' ' @@ -412,14 +412,42 @@ test_expect_success 'Log output (complex mapping)' ' test_cmp expect actual ' -cat >expect <<\EOF +cat >expect << EOF +Author email cto@coompany.xx has local-part cto +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email me@company.xx has local-part me +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email me@company.xx has local-part me +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email nick2@company.xx has local-part nick2 +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email bugs@company.xx has local-part bugs +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email bugs@company.xx has local-part bugs +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME + +Author email author@example.com has local-part author +Committer email $GIT_COMMITTER_EMAIL has local-part $TEST_COMMITTER_LOCALNAME +EOF + +test_expect_success 'Log output (local-part email address)' ' + git log --pretty=format:"Author email %ae has local-part %al%nCommitter email %ce has local-part %cl%n" >actual && + test_cmp expect actual +' + +cat >expect << EOF Author: CTO <cto@company.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Other Author <other@author.xx> Author: Other Author <other@author.xx> Author: Some Dude <some@dude.xx> -Author: A U Thor <author@example.com> +Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF test_expect_success 'Log output with --use-mailmap' ' @@ -427,14 +455,14 @@ test_expect_success 'Log output with --use-mailmap' ' test_cmp expect actual ' -cat >expect <<\EOF +cat >expect << EOF Author: CTO <cto@company.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> Author: Other Author <other@author.xx> Author: Other Author <other@author.xx> Author: Some Dude <some@dude.xx> -Author: A U Thor <author@example.com> +Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> EOF test_expect_success 'Log output with log.mailmap' ' @@ -442,6 +470,34 @@ test_expect_success 'Log output with log.mailmap' ' test_cmp expect actual ' +test_expect_success 'log.mailmap=false disables mailmap' ' + cat >expect <<- EOF && + Author: CTO <cto@coompany.xx> + Author: claus <me@company.xx> + Author: santa <me@company.xx> + Author: nick2 <nick2@company.xx> + Author: nick2 <bugs@company.xx> + Author: nick1 <bugs@company.xx> + Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> + EOF + git -c log.mailmap=False log | grep Author > actual && + test_cmp expect actual +' + +test_expect_success '--no-use-mailmap disables mailmap' ' + cat >expect <<- EOF && + Author: CTO <cto@coompany.xx> + Author: claus <me@company.xx> + Author: santa <me@company.xx> + Author: nick2 <nick2@company.xx> + Author: nick2 <bugs@company.xx> + Author: nick1 <bugs@company.xx> + Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL> + EOF + git log --no-use-mailmap | grep Author > actual && + test_cmp expect actual +' + cat >expect <<\EOF Author: Santa Claus <santa.claus@northpole.xx> Author: Santa Claus <santa.claus@northpole.xx> @@ -461,14 +517,19 @@ test_expect_success 'Grep author with log.mailmap' ' test_cmp expect actual ' +test_expect_success 'log.mailmap is true by default these days' ' + git log --author Santa | grep Author >actual && + test_cmp expect actual +' + test_expect_success 'Only grep replaced author with --use-mailmap' ' git log --use-mailmap --author "<cto@coompany.xx>" >actual && test_must_be_empty actual ' # git blame -cat >expect <<\EOF -^OBJI (A U Thor DATE 1) one +cat >expect <<EOF +^OBJI ($GIT_AUTHOR_NAME DATE 1) one OBJID (Some Dude DATE 2) two OBJID (Other Author DATE 3) three OBJID (Other Author DATE 4) four diff --git a/t/t4204-patch-id.sh b/t/t4204-patch-id.sh index 0288c17..8ff8bd8 100755 --- a/t/t4204-patch-id.sh +++ b/t/t4204-patch-id.sh @@ -25,7 +25,7 @@ test_expect_success 'setup' ' test_expect_success 'patch-id output is well-formed' ' git log -p -1 | git patch-id >output && - grep "^[a-f0-9]\{40\} $(git rev-parse HEAD)$" output + grep "^$OID_REGEX $(git rev-parse HEAD)$" output ' #calculate patch id. Make sure output is not empty. diff --git a/t/t4205-log-pretty-formats.sh b/t/t4205-log-pretty-formats.sh index 978a8a6..204c149 100755 --- a/t/t4205-log-pretty-formats.sh +++ b/t/t4205-log-pretty-formats.sh @@ -134,6 +134,36 @@ test_expect_failure C_LOCALE_OUTPUT 'NUL termination with --stat' ' test_cmp expected actual ' +for p in short medium full fuller email raw +do + test_expect_success "NUL termination with --reflog --pretty=$p" ' + revs="$(git rev-list --reflog)" && + for r in $revs + do + git show -s "$r" --pretty="$p" && + printf "\0" || return 1 + done >expect && + { + git log -z --reflog --pretty="$p" && + printf "\0" + } >actual && + test_cmp expect actual + ' +done + +test_expect_success 'NUL termination with --reflog --pretty=oneline' ' + revs="$(git rev-list --reflog)" && + for r in $revs + do + git show -s --pretty=oneline "$r" >raw && + cat raw | lf_to_nul || exit 1 + done >expect && + # the trailing NUL is already produced so we do not need to + # output another one + git log -z --pretty=oneline --reflog >actual && + test_cmp expect actual +' + test_expect_success 'setup more commits' ' test_commit "message one" one one message-one && test_commit "message two" two two message-two && @@ -503,6 +533,12 @@ test_expect_success 'ISO and ISO-strict date formats display the same values' ' test_cmp expected actual ' +test_expect_success 'short date' ' + git log --format=%ad%n%cd --date=short >expected && + git log --format=%as%n%cs >actual && + test_cmp expected actual +' + # get new digests (with no abbreviations) test_expect_success 'set up log decoration tests' ' head1=$(git rev-parse --verify HEAD~0) && @@ -578,6 +614,24 @@ test_expect_success '%(trailers:only) shows only "key: value" trailers' ' test_cmp expect actual ' +test_expect_success '%(trailers:only=yes) shows only "key: value" trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=yes)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only=no) shows all trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=no)" >actual && + cat trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:only=no,only=true) shows only "key: value" trailers' ' + git log --no-walk --pretty=format:"%(trailers:only=yes)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + test_expect_success '%(trailers:unfold) unfolds trailers' ' git log --no-walk --pretty="%(trailers:unfold)" >actual && { @@ -598,6 +652,105 @@ test_expect_success ':only and :unfold work together' ' test_cmp expect actual ' +test_expect_success 'pretty format %(trailers:key=foo) shows that trailer' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo) is case insensitive' ' + git log --no-walk --pretty="format:%(trailers:key=AcKed-bY)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo:) trailing colon also works' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by:)" >actual && + echo "Acked-by: A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo) multiple keys' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by:,key=Signed-off-By)" >actual && + grep -v patch.description <trailers >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=nonexistent) becomes empty' ' + git log --no-walk --pretty="x%(trailers:key=Nacked-by)x" >actual && + echo "xx" >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo) handles multiple lines even if folded' ' + git log --no-walk --pretty="format:%(trailers:key=Signed-Off-by)" >actual && + grep -v patch.description <trailers | grep -v Acked-by >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo,unfold) properly unfolds' ' + git log --no-walk --pretty="format:%(trailers:key=Signed-Off-by,unfold)" >actual && + unfold <trailers | grep Signed-off-by >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:key=foo,only=no) also includes nontrailer lines' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by,only=no)" >actual && + { + echo "Acked-by: A U Thor <author@example.com>" && + grep patch.description <trailers + } >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key) without value is error' ' + git log --no-walk --pretty="tformat:%(trailers:key)" >actual && + echo "%(trailers:key)" >expect && + test_cmp expect actual +' + +test_expect_success '%(trailers:key=foo,valueonly) shows only value' ' + git log --no-walk --pretty="format:%(trailers:key=Acked-by,valueonly)" >actual && + echo "A U Thor <author@example.com>" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers:separator) changes separator' ' + git log --no-walk --pretty=format:"X%(trailers:separator=%x00,unfold)X" >actual && + printf "XSigned-off-by: A U Thor <author@example.com>\0Acked-by: A U Thor <author@example.com>\0[ v2 updated patch description ]\0Signed-off-by: A U Thor <author@example.com>X" >expect && + test_cmp expect actual +' + +test_expect_success 'pretty format %(trailers) combining separator/key/valueonly' ' + git commit --allow-empty -F - <<-\EOF && + Important fix + + The fix is explained here + + Closes: #1234 + EOF + + git commit --allow-empty -F - <<-\EOF && + Another fix + + The fix is explained here + + Closes: #567 + Closes: #890 + EOF + + git commit --allow-empty -F - <<-\EOF && + Does not close any tickets + EOF + + git log --pretty="%s% (trailers:separator=%x2c%x20,key=Closes,valueonly)" HEAD~3.. >actual && + test_write_lines \ + "Does not close any tickets" \ + "Another fix #567, #890" \ + "Important fix #1234" >expect && + test_cmp expect actual +' + test_expect_success 'trailer parsing not fooled by --- line' ' git commit --allow-empty -F - <<-\EOF && this is the subject @@ -621,4 +774,97 @@ test_expect_success 'trailer parsing not fooled by --- line' ' test_cmp expect actual ' +test_expect_success 'set up %S tests' ' + git checkout --orphan source-a && + test_commit one && + test_commit two && + git checkout -b source-b HEAD^ && + test_commit three +' + +test_expect_success 'log --format=%S paints branch names' ' + cat >expect <<-\EOF && + source-b + source-a + source-b + EOF + git log --format=%S source-a source-b >actual && + test_cmp expect actual +' + +test_expect_success 'log --format=%S paints tag names' ' + git tag -m tagged source-tag && + cat >expect <<-\EOF && + source-tag + source-a + source-tag + EOF + git log --format=%S source-tag source-a >actual && + test_cmp expect actual +' + +test_expect_success 'log --format=%S paints symmetric ranges' ' + cat >expect <<-\EOF && + source-b + source-a + EOF + git log --format=%S source-a...source-b >actual && + test_cmp expect actual +' + +test_expect_success '%S in git log --format works with other placeholders (part 1)' ' + git log --format="source-b %h" source-b >expect && + git log --format="%S %h" source-b >actual && + test_cmp expect actual +' + +test_expect_success '%S in git log --format works with other placeholders (part 2)' ' + git log --format="%h source-b" source-b >expect && + git log --format="%h %S" source-b >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference with log.date is overridden by short date' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + test_config log.date rfc && + git log --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference with explicit date overrides short date' ' + git log --date=rfc --pretty="tformat:%h (%s, %ad)" >expect && + git log --date=rfc --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is never unabbreviated' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --no-abbrev-commit --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is never decorated' ' + git log --pretty="tformat:%h (%s, %as)" >expect && + git log --decorate=short --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference does not output reflog info' ' + git log --walk-reflogs --pretty="tformat:%h (%s, %as)" >expect && + git log --walk-reflogs --pretty=reference >actual && + test_cmp expect actual +' + +test_expect_success 'log --pretty=reference is colored appropriately' ' + git log --color=always --pretty="tformat:%C(auto)%h (%s, %as)" >expect && + git log --color=always --pretty=reference >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4209-log-pickaxe.sh b/t/t4209-log-pickaxe.sh index 844df76..5d06f5f 100755 --- a/t/t4209-log-pickaxe.sh +++ b/t/t4209-log-pickaxe.sh @@ -106,4 +106,39 @@ test_expect_success 'log -S --no-textconv (missing textconv tool)' ' rm .gitattributes ' +test_expect_success 'setup log -[GS] binary & --text' ' + git checkout --orphan GS-binary-and-text && + git read-tree --empty && + printf "a\na\0a\n" >data.bin && + git add data.bin && + git commit -m "create binary file" data.bin && + printf "a\na\0a\n" >>data.bin && + git commit -m "modify binary file" data.bin && + git rm data.bin && + git commit -m "delete binary file" data.bin && + git log >full-log +' + +test_expect_success 'log -G ignores binary files' ' + git log -Ga >log && + test_must_be_empty log +' + +test_expect_success 'log -G looks into binary files with -a' ' + git log -a -Ga >log && + test_cmp log full-log +' + +test_expect_success 'log -G looks into binary files with textconv filter' ' + test_when_finished "rm .gitattributes" && + echo "* diff=bin" >.gitattributes && + git -c diff.bin.textconv=cat log -Ga >log && + test_cmp log full-log +' + +test_expect_success 'log -S looks into binary files' ' + git log -Sa >log && + test_cmp log full-log +' + test_done diff --git a/t/t4210-log-i18n.sh b/t/t4210-log-i18n.sh index 7c51943..c379208 100755 --- a/t/t4210-log-i18n.sh +++ b/t/t4210-log-i18n.sh @@ -1,12 +1,15 @@ #!/bin/sh test_description='test log with i18n features' -. ./test-lib.sh +. ./lib-gettext.sh # two forms of é utf8_e=$(printf '\303\251') latin1_e=$(printf '\351') +# invalid UTF-8 +invalid_e=$(printf '\303\50)') # ")" at end to close opening "(" + test_expect_success 'create commits in different encodings' ' test_tick && cat >msg <<-EOF && @@ -48,9 +51,43 @@ test_expect_success !MINGW 'log --grep does not find non-reencoded values (utf8) test_must_be_empty actual ' -test_expect_success 'log --grep does not find non-reencoded values (latin1)' ' +test_expect_success !MINGW 'log --grep does not find non-reencoded values (latin1)' ' git log --encoding=ISO-8859-1 --format=%s --grep=$utf8_e >actual && test_must_be_empty actual ' +for engine in fixed basic extended perl +do + prereq= + if test $engine = "perl" + then + prereq="PCRE" + else + prereq="" + fi + force_regex= + if test $engine != "fixed" + then + force_regex=.* + fi + test_expect_success !MINGW,!REGEX_ILLSEQ,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not find non-reencoded values (latin1 + locale)" " + cat >expect <<-\EOF && + latin1 + utf8 + EOF + LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$latin1_e\" >actual && + test_cmp expect actual + " + + test_expect_success !MINGW,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not find non-reencoded values (latin1 + locale)" " + LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$utf8_e\" >actual && + test_must_be_empty actual + " + + test_expect_success !MINGW,!REGEX_ILLSEQ,GETTEXT_LOCALE,$prereq "-c grep.patternType=$engine log --grep does not die on invalid UTF-8 value (latin1 + locale + invalid needle)" " + LC_ALL=\"$is_IS_locale\" git -c grep.patternType=$engine log --encoding=ISO-8859-1 --format=%s --grep=\"$force_regex$invalid_e\" >actual && + test_must_be_empty actual + " +done + test_done diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh index ef13221..cda5818 100755 --- a/t/t4211-line-log.sh +++ b/t/t4211-line-log.sh @@ -4,6 +4,7 @@ test_description='test log -L' . ./test-lib.sh test_expect_success 'setup (import history)' ' + test_oid_init && git fast-import < "$TEST_DIRECTORY"/t4211/history.export && git reset --hard ' @@ -11,7 +12,7 @@ test_expect_success 'setup (import history)' ' canned_test_1 () { test_expect_$1 "$2" " git log $2 >actual && - test_cmp \"\$TEST_DIRECTORY\"/t4211/expect.$3 actual + test_cmp \"\$TEST_DIRECTORY\"/t4211/$(test_oid algo)/expect.$3 actual " } @@ -25,7 +26,7 @@ canned_test_failure () { test_bad_opts () { test_expect_success "invalid args: $1" " test_must_fail git log $1 2>errors && - grep '$2' errors + test_i18ngrep '$2' errors " } @@ -115,4 +116,103 @@ test_expect_success 'range_set_union' ' git log $(for x in $(test_seq 200); do echo -L $((2*x)),+1:c.c; done) ' +test_expect_success '-s shows only line-log commits' ' + git log --format="commit %s" -L1,24:b.c >expect.raw && + grep ^commit expect.raw >expect && + git log --format="commit %s" -L1,24:b.c -s >actual && + test_cmp expect actual +' + +test_expect_success '-p shows the default patch output' ' + git log -L1,24:b.c >expect && + git log -L1,24:b.c -p >actual && + test_cmp expect actual +' + +test_expect_success '--raw is forbidden' ' + test_must_fail git log -L1,24:b.c --raw +' + +test_expect_success 'setup for checking fancy rename following' ' + git checkout --orphan moves-start && + git reset --hard && + + printf "%s\n" 12 13 14 15 b c d e >file-1 && + printf "%s\n" 22 23 24 25 B C D E >file-2 && + git add file-1 file-2 && + test_tick && + git commit -m "Add file-1 and file-2" && + oid_add_f1_f2=$(git rev-parse --short HEAD) && + + git checkout -b moves-main && + printf "%s\n" 11 12 13 14 15 b c d e >file-1 && + git commit -a -m "Modify file-1 on main" && + oid_mod_f1_main=$(git rev-parse --short HEAD) && + + printf "%s\n" 21 22 23 24 25 B C D E >file-2 && + git commit -a -m "Modify file-2 on main #1" && + oid_mod_f2_main_1=$(git rev-parse --short HEAD) && + + git mv file-1 renamed-1 && + git commit -m "Rename file-1 to renamed-1 on main" && + + printf "%s\n" 11 12 13 14 15 b c d e f >renamed-1 && + git commit -a -m "Modify renamed-1 on main" && + oid_mod_r1_main=$(git rev-parse --short HEAD) && + + printf "%s\n" 21 22 23 24 25 B C D E F >file-2 && + git commit -a -m "Modify file-2 on main #2" && + oid_mod_f2_main_2=$(git rev-parse --short HEAD) && + + git checkout -b moves-side moves-start && + printf "%s\n" 12 13 14 15 16 b c d e >file-1 && + git commit -a -m "Modify file-1 on side #1" && + oid_mod_f1_side_1=$(git rev-parse --short HEAD) && + + printf "%s\n" 22 23 24 25 26 B C D E >file-2 && + git commit -a -m "Modify file-2 on side" && + oid_mod_f2_side=$(git rev-parse --short HEAD) && + + git mv file-2 renamed-2 && + git commit -m "Rename file-2 to renamed-2 on side" && + + printf "%s\n" 12 13 14 15 16 a b c d e >file-1 && + git commit -a -m "Modify file-1 on side #2" && + oid_mod_f1_side_2=$(git rev-parse --short HEAD) && + + printf "%s\n" 22 23 24 25 26 A B C D E >renamed-2 && + git commit -a -m "Modify renamed-2 on side" && + oid_mod_r2_side=$(git rev-parse --short HEAD) && + + git checkout moves-main && + git merge moves-side && + oid_merge=$(git rev-parse --short HEAD) +' + +test_expect_success 'fancy rename following #1' ' + cat >expect <<-EOF && + $oid_merge Merge branch '\''moves-side'\'' into moves-main + $oid_mod_f1_side_2 Modify file-1 on side #2 + $oid_mod_f1_side_1 Modify file-1 on side #1 + $oid_mod_r1_main Modify renamed-1 on main + $oid_mod_f1_main Modify file-1 on main + $oid_add_f1_f2 Add file-1 and file-2 + EOF + git log -L1:renamed-1 --oneline --no-patch >actual && + test_cmp expect actual +' + +test_expect_success 'fancy rename following #2' ' + cat >expect <<-EOF && + $oid_merge Merge branch '\''moves-side'\'' into moves-main + $oid_mod_r2_side Modify renamed-2 on side + $oid_mod_f2_side Modify file-2 on side + $oid_mod_f2_main_2 Modify file-2 on main #2 + $oid_mod_f2_main_1 Modify file-2 on main #1 + $oid_add_f1_f2 Add file-1 and file-2 + EOF + git log -L1:renamed-2 --oneline --no-patch >actual && + test_cmp expect actual +' + test_done diff --git a/t/t4211/expect.beginning-of-file b/t/t4211/sha1/expect.beginning-of-file index 91b4054..91b4054 100644 --- a/t/t4211/expect.beginning-of-file +++ b/t/t4211/sha1/expect.beginning-of-file diff --git a/t/t4211/expect.end-of-file b/t/t4211/sha1/expect.end-of-file index bd25bb2..bd25bb2 100644 --- a/t/t4211/expect.end-of-file +++ b/t/t4211/sha1/expect.end-of-file diff --git a/t/t4211/expect.move-support-f b/t/t4211/sha1/expect.move-support-f index c905e01..c905e01 100644 --- a/t/t4211/expect.move-support-f +++ b/t/t4211/sha1/expect.move-support-f diff --git a/t/t4211/expect.multiple b/t/t4211/sha1/expect.multiple index 76ad5b5..76ad5b5 100644 --- a/t/t4211/expect.multiple +++ b/t/t4211/sha1/expect.multiple diff --git a/t/t4211/expect.multiple-overlapping b/t/t4211/sha1/expect.multiple-overlapping index d930b6e..d930b6e 100644 --- a/t/t4211/expect.multiple-overlapping +++ b/t/t4211/sha1/expect.multiple-overlapping diff --git a/t/t4211/expect.multiple-superset b/t/t4211/sha1/expect.multiple-superset index d930b6e..d930b6e 100644 --- a/t/t4211/expect.multiple-superset +++ b/t/t4211/sha1/expect.multiple-superset diff --git a/t/t4211/expect.parallel-change-f-to-main b/t/t4211/sha1/expect.parallel-change-f-to-main index 052def8..052def8 100644 --- a/t/t4211/expect.parallel-change-f-to-main +++ b/t/t4211/sha1/expect.parallel-change-f-to-main diff --git a/t/t4211/expect.simple-f b/t/t4211/sha1/expect.simple-f index a1f5bc4..a1f5bc4 100644 --- a/t/t4211/expect.simple-f +++ b/t/t4211/sha1/expect.simple-f diff --git a/t/t4211/expect.simple-f-to-main b/t/t4211/sha1/expect.simple-f-to-main index a475768..a475768 100644 --- a/t/t4211/expect.simple-f-to-main +++ b/t/t4211/sha1/expect.simple-f-to-main diff --git a/t/t4211/expect.simple-main b/t/t4211/sha1/expect.simple-main index 39ce39b..39ce39b 100644 --- a/t/t4211/expect.simple-main +++ b/t/t4211/sha1/expect.simple-main diff --git a/t/t4211/expect.simple-main-to-end b/t/t4211/sha1/expect.simple-main-to-end index 8480bd9..8480bd9 100644 --- a/t/t4211/expect.simple-main-to-end +++ b/t/t4211/sha1/expect.simple-main-to-end diff --git a/t/t4211/expect.two-ranges b/t/t4211/sha1/expect.two-ranges index 6109aa0..6109aa0 100644 --- a/t/t4211/expect.two-ranges +++ b/t/t4211/sha1/expect.two-ranges diff --git a/t/t4211/expect.vanishes-early b/t/t4211/sha1/expect.vanishes-early index 1f7cd06..1f7cd06 100644 --- a/t/t4211/expect.vanishes-early +++ b/t/t4211/sha1/expect.vanishes-early diff --git a/t/t4211/sha256/expect.beginning-of-file b/t/t4211/sha256/expect.beginning-of-file new file mode 100644 index 0000000..5adfdfc --- /dev/null +++ b/t/t4211/sha256/expect.beginning-of-file @@ -0,0 +1,43 @@ +commit 62a40b38fa4f00800004aee81ef287b7201317594ebcb990f38cbe493b01d200 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:47:40 2013 +0100 + + change at very beginning + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -1,3 +1,4 @@ ++#include <unistd.h> + #include <stdio.h> + + long f(long x) + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -1,3 +1,3 @@ + #include <stdio.h> + +-int f(int x) ++long f(long x) + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +1,3 @@ ++#include <stdio.h> ++ ++int f(int x) diff --git a/t/t4211/sha256/expect.end-of-file b/t/t4211/sha256/expect.end-of-file new file mode 100644 index 0000000..03ab5c1 --- /dev/null +++ b/t/t4211/sha256/expect.end-of-file @@ -0,0 +1,62 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -20,3 +20,5 @@ + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -20,3 +20,3 @@ + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -19,3 +19,3 @@ +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +18,3 @@ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.move-support-f b/t/t4211/sha256/expect.move-support-f new file mode 100644 index 0000000..223b4ed --- /dev/null +++ b/t/t4211/sha256/expect.move-support-f @@ -0,0 +1,80 @@ +commit 4f7a58195a92c400e28a2354328587f1ff14fb77f5cf894536f17ccbc72931b9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:49:50 2013 +0100 + + another simple change + +diff --git a/b.c b/b.c +--- a/b.c ++++ b/b.c +@@ -4,9 +4,9 @@ + long f(long x) + { + int s = 0; + while (x) { +- x >>= 1; ++ x /= 2; + s++; + } + return s; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.multiple b/t/t4211/sha256/expect.multiple new file mode 100644 index 0000000..ca00409 --- /dev/null +++ b/t/t4211/sha256/expect.multiple @@ -0,0 +1,104 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,7 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.multiple-overlapping b/t/t4211/sha256/expect.multiple-overlapping new file mode 100644 index 0000000..9015a45 --- /dev/null +++ b/t/t4211/sha256/expect.multiple-overlapping @@ -0,0 +1,187 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,21 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,18 +3,19 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + int main () + { + printf("%d\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,18 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.multiple-superset b/t/t4211/sha256/expect.multiple-superset new file mode 100644 index 0000000..9015a45 --- /dev/null +++ b/t/t4211/sha256/expect.multiple-superset @@ -0,0 +1,187 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,21 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,19 +4,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + int main () + { + printf("%ld\n", f(15)); + return 0; + } + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,19 +3,19 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,18 +3,19 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + int main () + { + printf("%d\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,18 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.parallel-change-f-to-main b/t/t4211/sha256/expect.parallel-change-f-to-main new file mode 100644 index 0000000..e68f892 --- /dev/null +++ b/t/t4211/sha256/expect.parallel-change-f-to-main @@ -0,0 +1,160 @@ +commit 98117c2059b76c36995748fb97b02542aef477fe26379e94c18fd70f7790bc67 +Merge: b511694 4f7a581 +Author: Thomas Rast <trast@inf.ethz.ch> +Date: Fri Apr 12 16:16:24 2013 +0200 + + Merge across the rename + + +commit 4f7a58195a92c400e28a2354328587f1ff14fb77f5cf894536f17ccbc72931b9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:49:50 2013 +0100 + + another simple change + +diff --git a/b.c b/b.c +--- a/b.c ++++ b/b.c +@@ -4,14 +4,14 @@ + long f(long x) + { + int s = 0; + while (x) { +- x >>= 1; ++ x /= 2; + s++; + } + return s; + } + + /* + * This is only an example! + */ + + +commit b511694f5337663fbd697622993a5f8e1099eca84be4df313f2b3ee94a098b42 +Author: Thomas Rast <trast@inf.ethz.ch> +Date: Fri Apr 12 16:15:57 2013 +0200 + + change on another line of history while rename happens + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -4,14 +4,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * This is only an example! ++ * This is only a short example! + */ + + +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,13 +3,14 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,13 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ diff --git a/t/t4211/sha256/expect.simple-f b/t/t4211/sha256/expect.simple-f new file mode 100644 index 0000000..65508d7 --- /dev/null +++ b/t/t4211/sha256/expect.simple-f @@ -0,0 +1,59 @@ +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.simple-f-to-main b/t/t4211/sha256/expect.simple-f-to-main new file mode 100644 index 0000000..77b721c --- /dev/null +++ b/t/t4211/sha256/expect.simple-f-to-main @@ -0,0 +1,100 @@ +commit 5a1b3989063d55e71e7685efa3392f133385b4034bddde530dcb5090d8b8b8ca +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:41 2013 +0100 + + touch comment + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ + long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* +- * A comment. ++ * This is only an example! + */ + + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,14 +3,14 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } + + /* + * A comment. + */ + + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,13 +3,14 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + + /* + * A comment. + */ + + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,13 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} ++ ++/* ++ * A comment. ++ */ ++ diff --git a/t/t4211/sha256/expect.simple-main b/t/t4211/sha256/expect.simple-main new file mode 100644 index 0000000..d20708c --- /dev/null +++ b/t/t4211/sha256/expect.simple-main @@ -0,0 +1,68 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +16,5 @@ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.simple-main-to-end b/t/t4211/sha256/expect.simple-main-to-end new file mode 100644 index 0000000..617cdf3 --- /dev/null +++ b/t/t4211/sha256/expect.simple-main-to-end @@ -0,0 +1,70 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,7 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} ++ ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +16,5 @@ ++int main () ++{ ++ printf("%d\n", f(15)); ++ return 0; ++} diff --git a/t/t4211/sha256/expect.two-ranges b/t/t4211/sha256/expect.two-ranges new file mode 100644 index 0000000..af57c8b --- /dev/null +++ b/t/t4211/sha256/expect.two-ranges @@ -0,0 +1,102 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} +\ No newline at end of file ++} + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -18,5 +18,5 @@ + int main () + { + printf("%ld\n", f(15)); + return 0; +-} ++} +\ No newline at end of file + +commit ccf97b9878189c40a981da50b15713bb80a35755326320ec80900caf22ced46f +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:45:16 2013 +0100 + + touch both functions + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,9 +3,9 @@ +-int f(int x) ++long f(long x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } + return s; + } +@@ -17,5 +17,5 @@ + int main () + { +- printf("%d\n", f(15)); ++ printf("%ld\n", f(15)); + return 0; + } + +commit f6434acd34260a6c9f61e96d96bf9a323d330561df5b1ca2631104f82026dfed +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:55 2013 +0100 + + change f() + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -3,8 +3,9 @@ + int f(int x) + { + int s = 0; + while (x) { + x >>= 1; + s++; + } ++ return s; + } + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +3,8 @@ ++int f(int x) ++{ ++ int s = 0; ++ while (x) { ++ x >>= 1; ++ s++; ++ } ++} diff --git a/t/t4211/sha256/expect.vanishes-early b/t/t4211/sha256/expect.vanishes-early new file mode 100644 index 0000000..11ec9bd --- /dev/null +++ b/t/t4211/sha256/expect.vanishes-early @@ -0,0 +1,39 @@ +commit 5526ed05c2476b56af8b7be499e8f78bd50f490740733a9ca7e1f55878fa90a9 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:43 2013 +0100 + + change back to complete line + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -22,1 +24,1 @@ +-} +\ No newline at end of file ++/* incomplete lines are bad! */ + +commit 29f32ac3141c48b22803e5c4127b719917b67d0f8ca8c5248bebfa2a19f7da10 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:48:10 2013 +0100 + + change to an incomplete line at end + +diff --git a/a.c b/a.c +--- a/a.c ++++ b/a.c +@@ -22,1 +22,1 @@ +-} ++} +\ No newline at end of file + +commit 1dd7e9b2b1699324b53b341e728653b913bc192a14dfea168c5b51f2b3d03592 +Author: Thomas Rast <trast@student.ethz.ch> +Date: Thu Feb 28 10:44:48 2013 +0100 + + initial + +diff --git a/a.c b/a.c +--- /dev/null ++++ b/a.c +@@ -0,0 +20,1 @@ ++} diff --git a/t/t4213-log-tabexpand.sh b/t/t4213-log-tabexpand.sh index 7f90f58..53a4af3 100755 --- a/t/t4213-log-tabexpand.sh +++ b/t/t4213-log-tabexpand.sh @@ -36,7 +36,7 @@ count_expand () esac # Prefix the output with the command line arguments, and - # replace SP with a dot both in the expecte and actual output + # replace SP with a dot both in the expected and actual output # so that test_cmp would show the difference together with the # breakage in a way easier to consume by the debugging user. { diff --git a/t/t4214-log-graph-octopus.sh b/t/t4214-log-graph-octopus.sh index dab96c8..a080325 100755 --- a/t/t4214-log-graph-octopus.sh +++ b/t/t4214-log-graph-octopus.sh @@ -3,82 +3,86 @@ test_description='git log --graph of skewed left octopus merge.' . ./test-lib.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh + +test_cmp_graph () { + cat >expect && + lib_test_cmp_graph --color=never --date-order --format=%s "$@" +} + +test_cmp_colored_graph () { + lib_test_cmp_colored_graph --date-order --format=%s "$@" +} test_expect_success 'set up merge history' ' - cat >expect.uncolored <<-\EOF && + test_commit initial && + for i in 1 2 3 4 ; do + git checkout master -b $i || return $? + # Make tag name different from branch name, to avoid + # ambiguity error when calling checkout. + test_commit $i $i $i tag$i || return $? + done && + git checkout 1 -b merge && + test_merge octopus-merge 1 2 3 4 && + test_commit after-merge && + git checkout 1 -b L && + test_commit left && + git checkout 4 -b crossover && + test_commit after-4 && + git checkout initial -b more-L && + test_commit after-initial +' + +test_expect_success 'log --graph with tricky octopus merge, no color' ' + test_cmp_graph left octopus-merge <<-\EOF * left - | *---. octopus-merge - | |\ \ \ - |/ / / / + | *-. octopus-merge + |/|\ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF +' + +test_expect_success 'log --graph with tricky octopus merge with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && cat >expect.colors <<-\EOF && * left - <RED>|<RESET> *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge - <RED>|<RESET> <RED>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <MAGENTA>\<RESET> - <RED>|<RESET><RED>/<RESET> <YELLOW>/<RESET> <BLUE>/<RESET> <MAGENTA>/<RESET> + <RED>|<RESET> *<MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET><BLUE>\<RESET> <MAGENTA>\<RESET> <RED>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 <RED>|<RESET> <YELLOW>|<RESET> * <MAGENTA>|<RESET> 3 <RED>|<RESET> <YELLOW>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - <RED>|<RESET> * <MAGENTA>|<RESET> 2 + <RED>|<RESET> * <MAGENTA>/<RESET> 2 <RED>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> - * <MAGENTA>|<RESET> 1 + * <MAGENTA>/<RESET> 1 <MAGENTA>|<RESET><MAGENTA>/<RESET> * initial EOF - test_commit initial && - for i in 1 2 3 4 ; do - git checkout master -b $i || return $? - # Make tag name different from branch name, to avoid - # ambiguity error when calling checkout. - test_commit $i $i $i tag$i || return $? - done && - git checkout 1 -b merge && - test_tick && - git merge -m octopus-merge 1 2 3 4 && - git checkout 1 -b L && - test_commit left -' - -test_expect_success 'log --graph with tricky octopus merge with colors' ' - test_config log.graphColors red,green,yellow,blue,magenta,cyan && - git log --color=always --graph --date-order --pretty=tformat:%s --all >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors -' - -test_expect_success 'log --graph with tricky octopus merge, no color' ' - git log --color=never --graph --date-order --pretty=tformat:%s --all >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual + test_cmp_colored_graph left octopus-merge ' # Repeat the previous two tests with "normal" octopus merge (i.e., # without the first parent skewing to the "left" branch column). test_expect_success 'log --graph with normal octopus merge, no color' ' - cat >expect.uncolored <<-\EOF && + test_cmp_graph octopus-merge <<-\EOF *---. octopus-merge |\ \ \ | | | * 4 | | * | 3 | | |/ - | * | 2 + | * / 2 | |/ - * | 1 + * / 1 |/ * initial EOF - git log --color=never --graph --date-order --pretty=tformat:%s merge >actual.raw && - sed "s/ *\$//" actual.raw >actual && - test_cmp expect.uncolored actual ' test_expect_success 'log --graph with normal octopus merge with colors' ' @@ -88,15 +92,256 @@ test_expect_success 'log --graph with normal octopus merge with colors' ' <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 4 <RED>|<RESET> <GREEN>|<RESET> * <BLUE>|<RESET> 3 <RED>|<RESET> <GREEN>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> - <RED>|<RESET> * <BLUE>|<RESET> 2 + <RED>|<RESET> * <BLUE>/<RESET> 2 <RED>|<RESET> <BLUE>|<RESET><BLUE>/<RESET> - * <BLUE>|<RESET> 1 + * <BLUE>/<RESET> 1 <BLUE>|<RESET><BLUE>/<RESET> * initial EOF test_config log.graphColors red,green,yellow,blue,magenta,cyan && - git log --color=always --graph --date-order --pretty=tformat:%s merge >actual.colors.raw && - test_decode_color <actual.colors.raw | sed "s/ *\$//" >actual.colors && - test_cmp expect.colors actual.colors + test_cmp_colored_graph octopus-merge ' + +test_expect_success 'log --graph with normal octopus merge and child, no color' ' + test_cmp_graph after-merge <<-\EOF + * after-merge + *---. octopus-merge + |\ \ \ + | | | * 4 + | | * | 3 + | | |/ + | * / 2 + | |/ + * / 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with normal octopus and child merge with colors' ' + cat >expect.colors <<-\EOF && + * after-merge + *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge + <GREEN>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <MAGENTA>\<RESET> + <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 + <GREEN>|<RESET> <YELLOW>|<RESET> * <MAGENTA>|<RESET> 3 + <GREEN>|<RESET> <YELLOW>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> + <GREEN>|<RESET> * <MAGENTA>/<RESET> 2 + <GREEN>|<RESET> <MAGENTA>|<RESET><MAGENTA>/<RESET> + * <MAGENTA>/<RESET> 1 + <MAGENTA>|<RESET><MAGENTA>/<RESET> + * initial + EOF + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + test_cmp_colored_graph after-merge +' + +test_expect_success 'log --graph with tricky octopus merge and its child, no color' ' + test_cmp_graph left after-merge <<-\EOF + * left + | * after-merge + | *-. octopus-merge + |/|\ \ + | | | * 4 + | | * | 3 + | | |/ + | * / 2 + | |/ + * / 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with tricky octopus merge and its child with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * left + <RED>|<RESET> * after-merge + <RED>|<RESET> *<CYAN>-<RESET><CYAN>.<RESET> octopus-merge + <RED>|<RESET><RED>/<RESET><BLUE>|<RESET><MAGENTA>\<RESET> <CYAN>\<RESET> + <RED>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> * 4 + <RED>|<RESET> <BLUE>|<RESET> * <CYAN>|<RESET> 3 + <RED>|<RESET> <BLUE>|<RESET> <CYAN>|<RESET><CYAN>/<RESET> + <RED>|<RESET> * <CYAN>/<RESET> 2 + <RED>|<RESET> <CYAN>|<RESET><CYAN>/<RESET> + * <CYAN>/<RESET> 1 + <CYAN>|<RESET><CYAN>/<RESET> + * initial + EOF + test_cmp_colored_graph left after-merge +' + +test_expect_success 'log --graph with crossover in octopus merge, no color' ' + test_cmp_graph after-4 octopus-merge <<-\EOF + * after-4 + | *---. octopus-merge + | |\ \ \ + | |_|_|/ + |/| | | + * | | | 4 + | | | * 3 + | |_|/ + |/| | + | | * 2 + | |/ + |/| + | * 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with crossover in octopus merge with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * after-4 + <RED>|<RESET> *<BLUE>-<RESET><BLUE>-<RESET><RED>-<RESET><RED>.<RESET> octopus-merge + <RED>|<RESET> <GREEN>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <RED>\<RESET> + <RED>|<RESET> <GREEN>|<RESET><RED>_<RESET><YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> + * <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> 4 + <MAGENTA>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 3 + <MAGENTA>|<RESET> <GREEN>|<RESET><MAGENTA>_<RESET><YELLOW>|<RESET><MAGENTA>/<RESET> + <MAGENTA>|<RESET><MAGENTA>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> + <MAGENTA>|<RESET> <GREEN>|<RESET> * 2 + <MAGENTA>|<RESET> <GREEN>|<RESET><MAGENTA>/<RESET> + <MAGENTA>|<RESET><MAGENTA>/<RESET><GREEN>|<RESET> + <MAGENTA>|<RESET> * 1 + <MAGENTA>|<RESET><MAGENTA>/<RESET> + * initial + EOF + test_cmp_colored_graph after-4 octopus-merge +' + +test_expect_success 'log --graph with crossover in octopus merge and its child, no color' ' + test_cmp_graph after-4 after-merge <<-\EOF + * after-4 + | * after-merge + | *---. octopus-merge + | |\ \ \ + | |_|_|/ + |/| | | + * | | | 4 + | | | * 3 + | |_|/ + |/| | + | | * 2 + | |/ + |/| + | * 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with crossover in octopus merge and its child with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * after-4 + <RED>|<RESET> * after-merge + <RED>|<RESET> *<MAGENTA>-<RESET><MAGENTA>-<RESET><RED>-<RESET><RED>.<RESET> octopus-merge + <RED>|<RESET> <YELLOW>|<RESET><BLUE>\<RESET> <MAGENTA>\<RESET> <RED>\<RESET> + <RED>|<RESET> <YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>_<RESET><MAGENTA>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> + * <YELLOW>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> 4 + <CYAN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 3 + <CYAN>|<RESET> <YELLOW>|<RESET><CYAN>_<RESET><BLUE>|<RESET><CYAN>/<RESET> + <CYAN>|<RESET><CYAN>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> + <CYAN>|<RESET> <YELLOW>|<RESET> * 2 + <CYAN>|<RESET> <YELLOW>|<RESET><CYAN>/<RESET> + <CYAN>|<RESET><CYAN>/<RESET><YELLOW>|<RESET> + <CYAN>|<RESET> * 1 + <CYAN>|<RESET><CYAN>/<RESET> + * initial + EOF + test_cmp_colored_graph after-4 after-merge +' + +test_expect_success 'log --graph with unrelated commit and octopus tip, no color' ' + test_cmp_graph after-initial octopus-merge <<-\EOF + * after-initial + | *---. octopus-merge + | |\ \ \ + | | | | * 4 + | |_|_|/ + |/| | | + | | | * 3 + | |_|/ + |/| | + | | * 2 + | |/ + |/| + | * 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with unrelated commit and octopus tip with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * after-initial + <RED>|<RESET> *<BLUE>-<RESET><BLUE>-<RESET><MAGENTA>-<RESET><MAGENTA>.<RESET> octopus-merge + <RED>|<RESET> <GREEN>|<RESET><YELLOW>\<RESET> <BLUE>\<RESET> <MAGENTA>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 4 + <RED>|<RESET> <GREEN>|<RESET><RED>_<RESET><YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 3 + <RED>|<RESET> <GREEN>|<RESET><RED>_<RESET><YELLOW>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> + <RED>|<RESET> <GREEN>|<RESET> * 2 + <RED>|<RESET> <GREEN>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> + <RED>|<RESET> * 1 + <RED>|<RESET><RED>/<RESET> + * initial + EOF + test_cmp_colored_graph after-initial octopus-merge +' + +test_expect_success 'log --graph with unrelated commit and octopus child, no color' ' + test_cmp_graph after-initial after-merge <<-\EOF + * after-initial + | * after-merge + | *---. octopus-merge + | |\ \ \ + | | | | * 4 + | |_|_|/ + |/| | | + | | | * 3 + | |_|/ + |/| | + | | * 2 + | |/ + |/| + | * 1 + |/ + * initial + EOF +' + +test_expect_success 'log --graph with unrelated commit and octopus child with colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * after-initial + <RED>|<RESET> * after-merge + <RED>|<RESET> *<MAGENTA>-<RESET><MAGENTA>-<RESET><CYAN>-<RESET><CYAN>.<RESET> octopus-merge + <RED>|<RESET> <YELLOW>|<RESET><BLUE>\<RESET> <MAGENTA>\<RESET> <CYAN>\<RESET> + <RED>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> * 4 + <RED>|<RESET> <YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>_<RESET><MAGENTA>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> <MAGENTA>|<RESET> + <RED>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 3 + <RED>|<RESET> <YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> + <RED>|<RESET> <YELLOW>|<RESET> * 2 + <RED>|<RESET> <YELLOW>|<RESET><RED>/<RESET> + <RED>|<RESET><RED>/<RESET><YELLOW>|<RESET> + <RED>|<RESET> * 1 + <RED>|<RESET><RED>/<RESET> + * initial + EOF + test_cmp_colored_graph after-initial after-merge +' + test_done diff --git a/t/t4215-log-skewed-merges.sh b/t/t4215-log-skewed-merges.sh new file mode 100755 index 0000000..28d0779 --- /dev/null +++ b/t/t4215-log-skewed-merges.sh @@ -0,0 +1,373 @@ +#!/bin/sh + +test_description='git log --graph of skewed merges' + +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-log-graph.sh + +check_graph () { + cat >expect && + lib_test_cmp_graph --format=%s "$@" +} + +test_expect_success 'log --graph with merge fusing with its left and right neighbors' ' + git checkout --orphan _p && + test_commit A && + test_commit B && + git checkout -b _q @^ && test_commit C && + git checkout -b _r @^ && test_commit D && + git checkout _p && git merge --no-ff _q _r -m E && + git checkout _r && test_commit F && + git checkout _p && git merge --no-ff _r -m G && + git checkout @^^ && git merge --no-ff _p -m H && + + check_graph <<-\EOF + * H + |\ + | * G + | |\ + | | * F + | * | E + |/|\| + | | * D + | * | C + | |/ + * / B + |/ + * A + EOF +' + +test_expect_success 'log --graph with left-skewed merge' ' + git checkout --orphan 0_p && test_commit 0_A && + git checkout -b 0_q 0_p && test_commit 0_B && + git checkout -b 0_r 0_p && + test_commit 0_C && + test_commit 0_D && + git checkout -b 0_s 0_p && test_commit 0_E && + git checkout -b 0_t 0_p && git merge --no-ff 0_r^ 0_s -m 0_F && + git checkout 0_p && git merge --no-ff 0_s -m 0_G && + git checkout @^ && git merge --no-ff 0_q 0_r 0_t 0_p -m 0_H && + + check_graph <<-\EOF + *-----. 0_H + |\ \ \ \ + | | | | * 0_G + | |_|_|/| + |/| | | | + | | | * | 0_F + | |_|/|\| + |/| | | | + | | | | * 0_E + | |_|_|/ + |/| | | + | | * | 0_D + | | |/ + | | * 0_C + | |/ + |/| + | * 0_B + |/ + * 0_A + EOF +' + +test_expect_success 'log --graph with nested left-skewed merge' ' + git checkout --orphan 1_p && + test_commit 1_A && + test_commit 1_B && + test_commit 1_C && + git checkout -b 1_q @^ && test_commit 1_D && + git checkout 1_p && git merge --no-ff 1_q -m 1_E && + git checkout -b 1_r @~3 && test_commit 1_F && + git checkout 1_p && git merge --no-ff 1_r -m 1_G && + git checkout @^^ && git merge --no-ff 1_p -m 1_H && + + check_graph <<-\EOF + * 1_H + |\ + | * 1_G + | |\ + | | * 1_F + | * | 1_E + |/| | + | * | 1_D + * | | 1_C + |/ / + * / 1_B + |/ + * 1_A + EOF +' + +test_expect_success 'log --graph with nested left-skewed merge following normal merge' ' + git checkout --orphan 2_p && + test_commit 2_A && + test_commit 2_B && + test_commit 2_C && + git checkout -b 2_q @^^ && + test_commit 2_D && + test_commit 2_E && + git checkout -b 2_r @^ && test_commit 2_F && + git checkout 2_q && + git merge --no-ff 2_r -m 2_G && + git merge --no-ff 2_p^ -m 2_H && + git checkout -b 2_s @^^ && git merge --no-ff 2_q -m 2_J && + git checkout 2_p && git merge --no-ff 2_s -m 2_K && + + check_graph <<-\EOF + * 2_K + |\ + | * 2_J + | |\ + | | * 2_H + | | |\ + | | * | 2_G + | |/| | + | | * | 2_F + | * | | 2_E + | |/ / + | * | 2_D + * | | 2_C + | |/ + |/| + * | 2_B + |/ + * 2_A + EOF +' + +test_expect_success 'log --graph with nested right-skewed merge following left-skewed merge' ' + git checkout --orphan 3_p && + test_commit 3_A && + git checkout -b 3_q && + test_commit 3_B && + test_commit 3_C && + git checkout -b 3_r @^ && + test_commit 3_D && + git checkout 3_q && git merge --no-ff 3_r -m 3_E && + git checkout 3_p && git merge --no-ff 3_q -m 3_F && + git checkout 3_r && test_commit 3_G && + git checkout 3_p && git merge --no-ff 3_r -m 3_H && + git checkout @^^ && git merge --no-ff 3_p -m 3_J && + + check_graph <<-\EOF + * 3_J + |\ + | * 3_H + | |\ + | | * 3_G + | * | 3_F + |/| | + | * | 3_E + | |\| + | | * 3_D + | * | 3_C + | |/ + | * 3_B + |/ + * 3_A + EOF +' + +test_expect_success 'log --graph with right-skewed merge following a left-skewed one' ' + git checkout --orphan 4_p && + test_commit 4_A && + test_commit 4_B && + test_commit 4_C && + git checkout -b 4_q @^^ && test_commit 4_D && + git checkout -b 4_r 4_p^ && git merge --no-ff 4_q -m 4_E && + git checkout -b 4_s 4_p^^ && + git merge --no-ff 4_r -m 4_F && + git merge --no-ff 4_p -m 4_G && + git checkout @^^ && git merge --no-ff 4_s -m 4_H && + + check_graph --date-order <<-\EOF + * 4_H + |\ + | * 4_G + | |\ + | * | 4_F + |/| | + | * | 4_E + | |\ \ + | | * | 4_D + | |/ / + |/| | + | | * 4_C + | |/ + | * 4_B + |/ + * 4_A + EOF +' + +test_expect_success 'log --graph with octopus merge with column joining its penultimate parent' ' + git checkout --orphan 5_p && + test_commit 5_A && + git branch 5_q && + git branch 5_r && + test_commit 5_B && + git checkout 5_q && test_commit 5_C && + git checkout 5_r && test_commit 5_D && + git checkout 5_p && + git merge --no-ff 5_q 5_r -m 5_E && + git checkout 5_q && test_commit 5_F && + git checkout -b 5_s 5_p^ && + git merge --no-ff 5_p 5_q -m 5_G && + git checkout 5_r && + git merge --no-ff 5_s -m 5_H && + + check_graph <<-\EOF + * 5_H + |\ + | *-. 5_G + | |\ \ + | | | * 5_F + | | * | 5_E + | |/|\ \ + | |_|/ / + |/| | / + | | |/ + * | | 5_D + | | * 5_C + | |/ + |/| + | * 5_B + |/ + * 5_A + EOF +' + +test_expect_success 'log --graph with multiple tips' ' + git checkout --orphan 6_1 && + test_commit 6_A && + git branch 6_2 && + git branch 6_4 && + test_commit 6_B && + git branch 6_3 && + test_commit 6_C && + git checkout 6_2 && test_commit 6_D && + git checkout 6_3 && test_commit 6_E && + git checkout -b 6_5 6_1 && + git merge --no-ff 6_2 -m 6_F && + git checkout 6_4 && test_commit 6_G && + git checkout 6_3 && + git merge --no-ff 6_4 -m 6_H && + git checkout 6_1 && + git merge --no-ff 6_2 -m 6_I && + + check_graph 6_1 6_3 6_5 <<-\EOF + * 6_I + |\ + | | * 6_H + | | |\ + | | | * 6_G + | | * | 6_E + | | | | * 6_F + | |_|_|/| + |/| | |/ + | | |/| + | |/| | + | * | | 6_D + | | |/ + | |/| + * | | 6_C + | |/ + |/| + * | 6_B + |/ + * 6_A + EOF +' + +test_expect_success 'log --graph with multiple tips and colors' ' + test_config log.graphColors red,green,yellow,blue,magenta,cyan && + cat >expect.colors <<-\EOF && + * 6_I + <RED>|<RESET><GREEN>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> * 6_H + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET><BLUE>\<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> * 6_G + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET> * 6_F + <RED>|<RESET> <GREEN>|<RESET><RED>_<RESET><YELLOW>|<RESET><RED>_<RESET><BLUE>|<RESET><RED>/<RESET><GREEN>|<RESET> + <RED>|<RESET><RED>/<RESET><GREEN>|<RESET> <YELLOW>|<RESET> <BLUE>|<RESET><GREEN>/<RESET> + <RED>|<RESET> <GREEN>|<RESET> <YELLOW>|<RESET><GREEN>/<RESET><BLUE>|<RESET> + <RED>|<RESET> <GREEN>|<RESET><GREEN>/<RESET><YELLOW>|<RESET> <BLUE>|<RESET> + <RED>|<RESET> <GREEN>|<RESET> * <BLUE>|<RESET> 6_E + <RED>|<RESET> * <CYAN>|<RESET> <BLUE>|<RESET> 6_D + <RED>|<RESET> <BLUE>|<RESET> <CYAN>|<RESET><BLUE>/<RESET> + <RED>|<RESET> <BLUE>|<RESET><BLUE>/<RESET><CYAN>|<RESET> + * <BLUE>|<RESET> <CYAN>|<RESET> 6_C + <CYAN>|<RESET> <BLUE>|<RESET><CYAN>/<RESET> + <CYAN>|<RESET><CYAN>/<RESET><BLUE>|<RESET> + * <BLUE>|<RESET> 6_B + <BLUE>|<RESET><BLUE>/<RESET> + * 6_A + EOF + lib_test_cmp_colored_graph --date-order --pretty=tformat:%s 6_1 6_3 6_5 +' + +test_expect_success 'log --graph with multiple tips' ' + git checkout --orphan 7_1 && + test_commit 7_A && + test_commit 7_B && + test_commit 7_C && + git checkout -b 7_2 7_1~2 && + test_commit 7_D && + test_commit 7_E && + git checkout -b 7_3 7_1~1 && + test_commit 7_F && + test_commit 7_G && + git checkout -b 7_4 7_2~1 && + test_commit 7_H && + git checkout -b 7_5 7_1~2 && + test_commit 7_I && + git checkout -b 7_6 7_3~1 && + test_commit 7_J && + git checkout -b M_1 7_1 && + git merge --no-ff 7_2 -m 7_M1 && + git checkout -b M_3 7_3 && + git merge --no-ff 7_4 -m 7_M2 && + git checkout -b M_5 7_5 && + git merge --no-ff 7_6 -m 7_M3 && + git checkout -b M_7 7_1 && + git merge --no-ff 7_2 7_3 -m 7_M4 && + + check_graph M_1 M_3 M_5 M_7 <<-\EOF + * 7_M1 + |\ + | | * 7_M2 + | | |\ + | | | * 7_H + | | | | * 7_M3 + | | | | |\ + | | | | | * 7_J + | | | | * | 7_I + | | | | | | * 7_M4 + | |_|_|_|_|/|\ + |/| | | | |/ / + | | |_|_|/| / + | |/| | | |/ + | | | |_|/| + | | |/| | | + | | * | | | 7_G + | | | |_|/ + | | |/| | + | | * | | 7_F + | * | | | 7_E + | | |/ / + | |/| | + | * | | 7_D + | | |/ + | |/| + * | | 7_C + | |/ + |/| + * | 7_B + |/ + * 7_A + EOF +' + +test_done diff --git a/t/t4253-am-keep-cr-dos.sh b/t/t4253-am-keep-cr-dos.sh index 553fe3e..6e1b73e 100755 --- a/t/t4253-am-keep-cr-dos.sh +++ b/t/t4253-am-keep-cr-dos.sh @@ -51,14 +51,16 @@ test_expect_success 'am with dos files without --keep-cr' ' test_expect_success 'am with dos files with --keep-cr' ' git checkout -b dosfiles-keep-cr initial && - git format-patch -k --stdout initial..master | git am --keep-cr -k -3 && + git format-patch -k --stdout initial..master >output && + git am --keep-cr -k -3 output && git diff --exit-code master ' test_expect_success 'am with dos files config am.keepcr' ' git config am.keepcr 1 && git checkout -b dosfiles-conf-keepcr initial && - git format-patch -k --stdout initial..master | git am -k -3 && + git format-patch -k --stdout initial..master >output && + git am -k -3 output && git diff --exit-code master ' diff --git a/t/t4256-am-format-flowed.sh b/t/t4256-am-format-flowed.sh index 6340310..2369c4e 100755 --- a/t/t4256-am-format-flowed.sh +++ b/t/t4256-am-format-flowed.sh @@ -11,7 +11,7 @@ test_expect_success 'setup' ' ' test_expect_success 'am with format=flowed' ' - git am <"$TEST_DIRECTORY/t4256/1/patch" >stdout 2>stderr && + git am <"$TEST_DIRECTORY/t4256/1/patch" 2>stderr && test_i18ngrep "warning: Patch sent with format=flowed" stderr && test_cmp "$TEST_DIRECTORY/t4256/1/mailinfo.c" mailinfo.c ' diff --git a/t/t4257-am-interactive.sh b/t/t4257-am-interactive.sh new file mode 100755 index 0000000..5344bd2 --- /dev/null +++ b/t/t4257-am-interactive.sh @@ -0,0 +1,52 @@ +#!/bin/sh + +test_description='am --interactive tests' +. ./test-lib.sh + +test_expect_success 'set up patches to apply' ' + test_commit unrelated && + test_commit no-conflict && + test_commit conflict-patch file patch && + git format-patch --stdout -2 >mbox && + + git reset --hard unrelated && + test_commit conflict-master file master base +' + +# Sanity check our setup. +test_expect_success 'applying all patches generates conflict' ' + test_must_fail git am mbox && + echo resolved >file && + git add -u && + git am --resolved +' + +test_expect_success 'interactive am can apply a single patch' ' + git reset --hard base && + # apply the first, but not the second + test_write_lines y n | git am -i mbox && + + echo no-conflict >expect && + git log -1 --format=%s >actual && + test_cmp expect actual +' + +test_expect_success 'interactive am can resolve conflict' ' + git reset --hard base && + # apply both; the second one will conflict + test_write_lines y y | test_must_fail git am -i mbox && + echo resolved >file && + git add -u && + # interactive "--resolved" will ask us if we want to apply the result + echo y | git am -i --resolved && + + echo conflict-patch >expect && + git log -1 --format=%s >actual && + test_cmp expect actual && + + echo resolved >expect && + git cat-file blob HEAD:file >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t4300-merge-tree.sh b/t/t4300-merge-tree.sh index d87cc7d..e59601e 100755 --- a/t/t4300-merge-tree.sh +++ b/t/t4300-merge-tree.sh @@ -11,16 +11,16 @@ test_expect_success setup ' ' test_expect_success 'file add A, !B' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "add-a-not-b" "ONE" "AAA" && + git merge-tree initial initial add-a-not-b >actual && + cat >expected <<EXPECTED && added in remote - their 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE + their 100644 $(git rev-parse HEAD:ONE) ONE @@ -0,0 +1 @@ +AAA EXPECTED - git reset --hard initial && - test_commit "add-a-not-b" "ONE" "AAA" && - git merge-tree initial initial add-a-not-b >actual && test_cmp expected actual ' @@ -41,10 +41,15 @@ test_expect_success 'file add A, B (same)' ' ' test_expect_success 'file add A, B (different)' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "add-a-b-diff-A" "ONE" "AAA" && + git reset --hard initial && + test_commit "add-a-b-diff-B" "ONE" "BBB" && + git merge-tree initial add-a-b-diff-A add-a-b-diff-B >actual && + cat >expected <<EXPECTED && added in both - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE + our 100644 $(git rev-parse add-a-b-diff-A:ONE) ONE + their 100644 $(git rev-parse add-a-b-diff-B:ONE) ONE @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -53,11 +58,6 @@ added in both +>>>>>>> .their EXPECTED - git reset --hard initial && - test_commit "add-a-b-diff-A" "ONE" "AAA" && - git reset --hard initial && - test_commit "add-a-b-diff-B" "ONE" "BBB" && - git merge-tree initial add-a-b-diff-A add-a-b-diff-B >actual && test_cmp expected actual ' @@ -69,18 +69,18 @@ test_expect_success 'file change A, !B' ' ' test_expect_success 'file change !A, B' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "change-not-a-b" "initial-file" "BBB" && + git merge-tree initial initial change-not-a-b >actual && + cat >expected <<EXPECTED && merged - result 100644 ba629238ca89489f2b350e196ca445e09d8bb834 initial-file - our 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file + result 100644 $(git rev-parse change-a-not-b:initial-file) initial-file + our 100644 $(git rev-parse initial:initial-file ) initial-file @@ -1 +1 @@ -initial +BBB EXPECTED - git reset --hard initial && - test_commit "change-not-a-b" "initial-file" "BBB" && - git merge-tree initial initial change-not-a-b >actual && test_cmp expected actual ' @@ -94,11 +94,16 @@ test_expect_success 'file change A, B (same)' ' ' test_expect_success 'file change A, B (different)' ' - cat >expected <<\EXPECTED && + git reset --hard initial && + test_commit "change-a-b-diff-A" "initial-file" "AAA" && + git reset --hard initial && + test_commit "change-a-b-diff-B" "initial-file" "BBB" && + git merge-tree initial change-a-b-diff-A change-a-b-diff-B >actual && + cat >expected <<EXPECTED && changed in both - base 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d initial-file - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 initial-file + base 100644 $(git rev-parse initial:initial-file ) initial-file + our 100644 $(git rev-parse change-a-b-diff-A:initial-file) initial-file + their 100644 $(git rev-parse change-a-b-diff-B:initial-file) initial-file @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -107,34 +112,10 @@ changed in both +>>>>>>> .their EXPECTED - git reset --hard initial && - test_commit "change-a-b-diff-A" "initial-file" "AAA" && - git reset --hard initial && - test_commit "change-a-b-diff-B" "initial-file" "BBB" && - git merge-tree initial change-a-b-diff-A change-a-b-diff-B >actual && test_cmp expected actual ' test_expect_success 'file change A, B (mixed)' ' - cat >expected <<\EXPECTED && -changed in both - base 100644 f4f1f998c7776568c4ff38f516d77fef9399b5a7 ONE - our 100644 af14c2c3475337c73759d561ef70b59e5c731176 ONE - their 100644 372d761493f524d44d59bd24700c3bdf914c973c ONE -@@ -7,7 +7,11 @@ - AAA - AAA - AAA -+<<<<<<< .our - BBB -+======= -+CCC -+>>>>>>> .their - AAA - AAA - AAA -EXPECTED - git reset --hard initial && test_commit "change-a-b-mix-base" "ONE" " AAA @@ -159,6 +140,26 @@ AAA" && "$(sed -e "1{s/AAA/BBB/;}" -e "10{s/AAA/CCC/;}" <ONE)" && git merge-tree change-a-b-mix-base change-a-b-mix-A change-a-b-mix-B \ >actual && + + cat >expected <<EXPECTED && +changed in both + base 100644 $(git rev-parse change-a-b-mix-base:ONE) ONE + our 100644 $(git rev-parse change-a-b-mix-A:ONE ) ONE + their 100644 $(git rev-parse change-a-b-mix-B:ONE ) ONE +@@ -7,7 +7,11 @@ + AAA + AAA + AAA ++<<<<<<< .our + BBB ++======= ++CCC ++>>>>>>> .their + AAA + AAA + AAA +EXPECTED + test_cmp expected actual ' @@ -173,20 +174,20 @@ test_expect_success 'file remove A, !B' ' ' test_expect_success 'file remove !A, B' ' - cat >expected <<\EXPECTED && -removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE -@@ -1 +0,0 @@ --AAA -EXPECTED - git reset --hard initial && test_commit "rm-not-a-b-base" "ONE" "AAA" && git rm ONE && git commit -m "rm-not-a-b" && git tag "rm-not-a-b" && git merge-tree rm-a-not-b-base rm-a-not-b-base rm-a-not-b >actual && + cat >expected <<EXPECTED && +removed in remote + base 100644 $(git rev-parse rm-a-not-b-base:ONE) ONE + our 100644 $(git rev-parse rm-a-not-b-base:ONE) ONE +@@ -1 +0,0 @@ +-AAA +EXPECTED + test_cmp expected actual ' @@ -201,14 +202,6 @@ test_expect_success 'file remove A, B (same)' ' ' test_expect_success 'file change A, remove B' ' - cat >expected <<\EXPECTED && -removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - our 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE -@@ -1 +0,0 @@ --BBB -EXPECTED - git reset --hard initial && test_commit "change-a-rm-b-base" "ONE" "AAA" && test_commit "change-a-rm-b-A" "ONE" "BBB" && @@ -218,16 +211,18 @@ EXPECTED git tag "change-a-rm-b-B" && git merge-tree change-a-rm-b-base change-a-rm-b-A change-a-rm-b-B \ >actual && + cat >expected <<EXPECTED && +removed in remote + base 100644 $(git rev-parse change-a-rm-b-base:ONE) ONE + our 100644 $(git rev-parse change-a-rm-b-A:ONE ) ONE +@@ -1 +0,0 @@ +-BBB +EXPECTED + test_cmp expected actual ' test_expect_success 'file remove A, change B' ' - cat >expected <<\EXPECTED && -removed in local - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d ONE - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 ONE -EXPECTED - git reset --hard initial && test_commit "rm-a-change-b-base" "ONE" "AAA" && @@ -238,6 +233,11 @@ EXPECTED test_commit "rm-a-change-b-B" "ONE" "BBB" && git merge-tree rm-a-change-b-base rm-a-change-b-A rm-a-change-b-B \ >actual && + cat >expected <<EXPECTED && +removed in local + base 100644 $(git rev-parse rm-a-change-b-base:ONE) ONE + their 100644 $(git rev-parse rm-a-change-b-B:ONE ) ONE +EXPECTED test_cmp expected actual ' @@ -250,10 +250,17 @@ test_expect_success 'tree add A, B (same)' ' ' test_expect_success 'tree add A, B (different)' ' - cat >expect <<-\EOF && + git reset --hard initial && + mkdir sub && + test_commit "add sub/file" "sub/file" "AAA" add-tree-a-b-A && + git reset --hard initial && + mkdir sub && + test_commit "add sub/file" "sub/file" "BBB" add-tree-a-b-B && + git merge-tree initial add-tree-a-b-A add-tree-a-b-B >actual && + cat >expect <<-EOF && added in both - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - their 100644 ba629238ca89489f2b350e196ca445e09d8bb834 sub/file + our 100644 $(git rev-parse add-tree-a-b-A:sub/file) sub/file + their 100644 $(git rev-parse add-tree-a-b-B:sub/file) sub/file @@ -1 +1,5 @@ +<<<<<<< .our AAA @@ -261,24 +268,10 @@ test_expect_success 'tree add A, B (different)' ' +BBB +>>>>>>> .their EOF - git reset --hard initial && - mkdir sub && - test_commit "add sub/file" "sub/file" "AAA" add-tree-a-b-A && - git reset --hard initial && - mkdir sub && - test_commit "add sub/file" "sub/file" "BBB" add-tree-a-b-B && - git merge-tree initial add-tree-a-b-A add-tree-a-b-B >actual && test_cmp expect actual ' test_expect_success 'tree unchanged A, removed B' ' - cat >expect <<-\EOF && - removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d sub/file - @@ -1 +0,0 @@ - -AAA - EOF git reset --hard initial && mkdir sub && test_commit "add sub/file" "sub/file" "AAA" tree-remove-b-initial && @@ -287,6 +280,13 @@ test_expect_success 'tree unchanged A, removed B' ' git commit -m "remove sub/file" && git tag tree-remove-b-B && git merge-tree tree-remove-b-initial tree-remove-b-initial tree-remove-b-B >actual && + cat >expect <<-EOF && + removed in remote + base 100644 $(git rev-parse tree-remove-b-initial:sub/file) sub/file + our 100644 $(git rev-parse tree-remove-b-initial:sub/file) sub/file + @@ -1 +0,0 @@ + -AAA + EOF test_cmp expect actual ' @@ -296,14 +296,14 @@ test_expect_success 'turn file to tree' ' mkdir initial-file && test_commit "turn-file-to-tree" "initial-file/ONE" "CCC" && git merge-tree initial initial turn-file-to-tree >actual && - cat >expect <<-\EOF && + cat >expect <<-EOF && added in remote - their 100644 43aa4fdec31eb92e1fdc2f0ce6ea9ddb7c32bcf7 initial-file/ONE + their 100644 $(git rev-parse turn-file-to-tree:initial-file/ONE) initial-file/ONE @@ -0,0 +1 @@ +CCC removed in remote - base 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file - our 100644 e79c5e8f964493290a409888d5413a737e8e5dd5 initial-file + base 100644 $(git rev-parse initial:initial-file) initial-file + our 100644 $(git rev-parse initial:initial-file) initial-file @@ -1 +0,0 @@ -initial EOF @@ -318,14 +318,14 @@ test_expect_success 'turn tree to file' ' rm -fr dir && test_commit "make-file" "dir" "CCC" && git merge-tree add-tree add-another-tree make-file >actual && - cat >expect <<-\EOF && + cat >expect <<-EOF && removed in remote - base 100644 43d5a8ed6ef6c00ff775008633f95787d088285d dir/path - our 100644 43d5a8ed6ef6c00ff775008633f95787d088285d dir/path + base 100644 $(git rev-parse add-tree:dir/path) dir/path + our 100644 $(git rev-parse add-tree:dir/path) dir/path @@ -1 +0,0 @@ -AAA added in remote - their 100644 43aa4fdec31eb92e1fdc2f0ce6ea9ddb7c32bcf7 dir + their 100644 $(git rev-parse make-file:dir) dir @@ -0,0 +1 @@ +CCC EOF diff --git a/t/t5000-tar-tree.sh b/t/t5000-tar-tree.sh index 602bfd9..37655a2 100755 --- a/t/t5000-tar-tree.sh +++ b/t/t5000-tar-tree.sh @@ -94,6 +94,13 @@ check_tar() { ' } +test_expect_success 'setup' ' + test_oid_cache <<-EOF + obj sha1:19f9c8273ec45a8938e6999cb59b3ff66739902a + obj sha256:3c666f798798601571f5cec0adb57ce4aba8546875e7693177e0535f34d2c49b + EOF +' + test_expect_success \ 'populate workdir' \ 'mkdir a && @@ -369,11 +376,10 @@ test_lazy_prereq TAR_HUGE ' ' test_expect_success LONG_IS_64BIT 'set up repository with huge blob' ' - obj_d=19 && - obj_f=f9c8273ec45a8938e6999cb59b3ff66739902a && - obj=${obj_d}${obj_f} && - mkdir -p .git/objects/$obj_d && - cp "$TEST_DIRECTORY"/t5000/$obj .git/objects/$obj_d/$obj_f && + obj=$(test_oid obj) && + path=$(test_oid_to_path $obj) && + mkdir -p .git/objects/$(dirname $path) && + cp "$TEST_DIRECTORY"/t5000/huge-object .git/objects/$path && rm -f .git/index && git update-index --add --cacheinfo 100644,$obj,huge && git commit -m huge diff --git a/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a b/t/t5000/huge-object Binary files differindex 5cbe9ec..5cbe9ec 100644 --- a/t/t5000/19f9c8273ec45a8938e6999cb59b3ff66739902a +++ b/t/t5000/huge-object diff --git a/t/t5004-archive-corner-cases.sh b/t/t5004-archive-corner-cases.sh index ced4435..3e7b23c 100755 --- a/t/t5004-archive-corner-cases.sh +++ b/t/t5004-archive-corner-cases.sh @@ -3,8 +3,12 @@ test_description='test corner cases of git-archive' . ./test-lib.sh -test_expect_success 'create commit with empty tree' ' - git commit --allow-empty -m foo +# the 10knuls.tar file is used to test for an empty git generated tar +# without having to invoke tar because an otherwise valid empty GNU tar +# will be considered broken by {Open,Net}BSD tar +test_expect_success 'create commit with empty tree and fake empty tar' ' + git commit --allow-empty -m foo && + perl -e "print \"\\0\" x 10240" >10knuls.tar ' # Make a dir and clean it up afterwards @@ -47,7 +51,6 @@ test_expect_success HEADER_ONLY_TAR_OK 'tar archive of commit with empty tree' ' test_expect_success 'tar archive of empty tree is empty' ' git archive --format=tar HEAD: >empty.tar && - perl -e "print \"\\0\" x 10240" >10knuls.tar && test_cmp_bin 10knuls.tar empty.tar ' @@ -106,16 +109,12 @@ test_expect_success 'create a commit with an empty subtree' ' test_expect_success 'archive empty subtree with no pathspec' ' git archive --format=tar $root_tree >subtree-all.tar && - make_dir extract && - "$TAR" xf subtree-all.tar -C extract && - check_dir extract + test_cmp_bin 10knuls.tar subtree-all.tar ' test_expect_success 'archive empty subtree by direct pathspec' ' git archive --format=tar $root_tree -- sub >subtree-path.tar && - make_dir extract && - "$TAR" xf subtree-path.tar -C extract && - check_dir extract + test_cmp_bin 10knuls.tar subtree-path.tar ' ZIPINFO=zipinfo @@ -205,4 +204,23 @@ test_expect_success EXPENSIVE,LONG_IS_64BIT,UNZIP,UNZIP_ZIP64_SUPPORT,ZIPINFO \ grep $size big.lst ' +build_tree() { + perl -e ' + my $hash = $ARGV[0]; + foreach my $order (2..6) { + $first = 10 ** $order; + foreach my $i (-13..-9) { + my $name = "a" x ($first + $i); + print "100644 blob $hash\t$name\n" + } + } + ' "$1" +} + +test_expect_success 'tar archive with long paths' ' + blob=$(echo foo | git hash-object -w --stdin) && + tree=$(build_tree $blob | git mktree) && + git archive -o long_paths.tar $tree +' + test_done diff --git a/t/t5100-mailinfo.sh b/t/t5100-mailinfo.sh index 9690dca..147e616 100755 --- a/t/t5100-mailinfo.sh +++ b/t/t5100-mailinfo.sh @@ -213,4 +213,19 @@ test_expect_failure 'mailinfo -b separated double [PATCH]' ' test z"$subj" = z"Subject: [other] message" ' +test_expect_success 'mailinfo handles unusual header whitespace' ' + git mailinfo /dev/null /dev/null >actual <<-\EOF && + From:Real Name <user@example.com> + Subject: extra spaces + EOF + + cat >expect <<-\EOF && + Author: Real Name + Email: user@example.com + Subject: extra spaces + + EOF + test_cmp expect actual +' + test_done diff --git a/t/t5150-request-pull.sh b/t/t5150-request-pull.sh index fca001e..c1811ea 100755 --- a/t/t5150-request-pull.sh +++ b/t/t5150-request-pull.sh @@ -4,6 +4,12 @@ test_description='Test workflows involving pull request.' . ./test-lib.sh +if ! test_have_prereq PERL +then + skip_all='skipping request-pull tests, perl not available' + test_done +fi + test_expect_success 'setup' ' git init --bare upstream.git && @@ -144,7 +150,6 @@ test_expect_success 'pull request after push' ' git request-pull initial origin master:for-upstream >../request ) && sed -nf read-request.sed <request >digest && - cat digest && { read task && read repository && @@ -173,7 +178,6 @@ test_expect_success 'request asks HEAD to be pulled' ' git request-pull initial "$downstream_url" >../request ) && sed -nf read-request.sed <request >digest && - cat digest && { read task && read repository && @@ -246,4 +250,57 @@ test_expect_success 'request-pull ignores OPTIONS_KEEPDASHDASH poison' ' ' +test_expect_success 'request-pull quotes regex metacharacters properly' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git tag -mrelease v2.0 && + git push origin refs/tags/v2.0:refs/tags/v2-0 && + test_must_fail git request-pull initial "$downstream_url" tags/v2.0 \ + 2>../err + ) && + grep "No match for commit .*" err && + grep "Are you sure you pushed" err + +' + +test_expect_success 'pull request with mismatched object' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git push origin HEAD:refs/tags/full && + test_must_fail git request-pull initial "$downstream_url" tags/full \ + 2>../err + ) && + grep "points to a different object" err && + grep "Are you sure you pushed" err + +' + +test_expect_success 'pull request with stale object' ' + + rm -fr downstream.git && + git init --bare downstream.git && + ( + cd local && + git checkout initial && + git merge --ff-only master && + git push origin refs/tags/full && + git tag -f -m"Thirty-one days" full && + test_must_fail git request-pull initial "$downstream_url" tags/full \ + 2>../err + ) && + grep "points to a different object" err && + grep "Are you sure you pushed" err + +' + test_done diff --git a/t/t5200-update-server-info.sh b/t/t5200-update-server-info.sh new file mode 100755 index 0000000..21a58ee --- /dev/null +++ b/t/t5200-update-server-info.sh @@ -0,0 +1,41 @@ +#!/bin/sh + +test_description='Test git update-server-info' + +. ./test-lib.sh + +test_expect_success 'setup' 'test_commit file' + +test_expect_success 'create info/refs' ' + git update-server-info && + test_path_is_file .git/info/refs +' + +test_expect_success 'modify and store mtime' ' + test-tool chmtime =0 .git/info/refs && + test-tool chmtime --get .git/info/refs >a +' + +test_expect_success 'info/refs is not needlessly overwritten' ' + git update-server-info && + test-tool chmtime --get .git/info/refs >b && + test_cmp a b +' + +test_expect_success 'info/refs can be forced to update' ' + git update-server-info -f && + test-tool chmtime --get .git/info/refs >b && + ! test_cmp a b +' + +test_expect_success 'info/refs updates when changes are made' ' + test-tool chmtime =0 .git/info/refs && + test-tool chmtime --get .git/info/refs >b && + test_cmp a b && + git update-ref refs/heads/foo HEAD && + git update-server-info && + test-tool chmtime --get .git/info/refs >b && + ! test_cmp a b +' + +test_done diff --git a/t/t5302-pack-index.sh b/t/t5302-pack-index.sh index 91d51b3..ad07f2f 100755 --- a/t/t5302-pack-index.sh +++ b/t/t5302-pack-index.sh @@ -6,9 +6,10 @@ test_description='pack index with 64-bit offsets and object CRC' . ./test-lib.sh -test_expect_success \ - 'setup' \ - 'rm -rf .git && +test_expect_success 'setup' ' + test_oid_init && + rawsz=$(test_oid rawsz) && + rm -rf .git && git init && git config pack.threads 1 && i=1 && @@ -32,7 +33,8 @@ test_expect_success \ echo $tree && git ls-tree $tree | sed -e "s/.* \\([0-9a-f]*\\) .*/\\1/" } >obj-list && - git update-ref HEAD $commit' + git update-ref HEAD $commit +' test_expect_success \ 'pack-objects with index version 1' \ @@ -157,10 +159,11 @@ test_expect_success \ offs_101=$(index_obj_offset 1.idx $sha1_101) && nr_099=$(index_obj_nr 1.idx $sha1_099) && chmod +w ".git/objects/pack/pack-${pack1}.pack" && + recordsz=$((rawsz + 4)) && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ - skip=$((4 + 256 * 4 + $nr_099 * 24)) \ - bs=1 count=20 conv=notrunc && + skip=$((4 + 256 * 4 + $nr_099 * recordsz)) \ + bs=1 count=$rawsz conv=notrunc && git cat-file blob $sha1_101 > file_101_foo1' test_expect_success \ @@ -200,8 +203,8 @@ test_expect_success \ chmod +w ".git/objects/pack/pack-${pack1}.pack" && dd of=".git/objects/pack/pack-${pack1}.pack" seek=$(($offs_101 + 1)) \ if=".git/objects/pack/pack-${pack1}.idx" \ - skip=$((8 + 256 * 4 + $nr_099 * 20)) \ - bs=1 count=20 conv=notrunc && + skip=$((8 + 256 * 4 + $nr_099 * rawsz)) \ + bs=1 count=$rawsz conv=notrunc && git cat-file blob $sha1_101 > file_101_foo2' test_expect_success \ @@ -226,7 +229,7 @@ test_expect_success \ nr=$(index_obj_nr ".git/objects/pack/pack-${pack1}.idx" $obj) && chmod +w ".git/objects/pack/pack-${pack1}.idx" && printf xxxx | dd of=".git/objects/pack/pack-${pack1}.idx" conv=notrunc \ - bs=1 count=4 seek=$((8 + 256 * 4 + $(wc -l <obj-list) * 20 + $nr * 4)) && + bs=1 count=4 seek=$((8 + 256 * 4 + $(wc -l <obj-list) * rawsz + $nr * 4)) && ( while read obj do git cat-file -p $obj >/dev/null || exit 1 done <obj-list ) && diff --git a/t/t5304-prune.sh b/t/t5304-prune.sh index 270da21..df60f18 100755 --- a/t/t5304-prune.sh +++ b/t/t5304-prune.sh @@ -118,10 +118,10 @@ test_expect_success 'prune: do not prune detached HEAD with no reflog' ' test_expect_success 'prune: prune former HEAD after checking out branch' ' - head_sha1=$(git rev-parse HEAD) && + head_oid=$(git rev-parse HEAD) && git checkout --quiet master && git prune -v >prune_actual && - grep "$head_sha1" prune_actual + grep "$head_oid" prune_actual ' @@ -265,15 +265,27 @@ EOF ' test_expect_success 'prune .git/shallow' ' - SHA1=$(echo hi|git commit-tree HEAD^{tree}) && - echo $SHA1 >.git/shallow && + oid=$(echo hi|git commit-tree HEAD^{tree}) && + echo $oid >.git/shallow && git prune --dry-run >out && - grep $SHA1 .git/shallow && - grep $SHA1 out && + grep $oid .git/shallow && + grep $oid out && git prune && test_path_is_missing .git/shallow ' +test_expect_success 'prune .git/shallow when there are no loose objects' ' + oid=$(echo hi|git commit-tree HEAD^{tree}) && + echo $oid >.git/shallow && + git update-ref refs/heads/shallow-tip $oid && + git repack -ad && + # verify assumption that all loose objects are gone + git count-objects | grep ^0 && + git prune && + echo $oid >expect && + test_cmp expect .git/shallow +' + test_expect_success 'prune: handle alternate object database' ' test_create_repo A && git -C A commit --allow-empty -m "initial commit" && @@ -314,8 +326,8 @@ test_expect_success 'prune: handle HEAD reflog in multiple worktrees' ' git reset --hard HEAD^ ) && git prune --expire=now && - SHA1=`git hash-object expected` && - git -C third-worktree show "$SHA1" >actual && + oid=`git hash-object expected` && + git -C third-worktree show "$oid" >actual && test_cmp expected actual ' @@ -329,4 +341,12 @@ test_expect_success 'prune: handle expire option correctly' ' git prune --no-expire ' +test_expect_success 'trivial prune with bitmaps enabled' ' + git repack -adb && + blob=$(echo bitmap-unreachable-blob | git hash-object -w --stdin) && + git prune --expire=now && + git cat-file -e HEAD && + test_must_fail git cat-file -e $blob +' + test_done diff --git a/t/t5307-pack-missing-commit.sh b/t/t5307-pack-missing-commit.sh index dacb440..f4338ab 100755 --- a/t/t5307-pack-missing-commit.sh +++ b/t/t5307-pack-missing-commit.sh @@ -24,11 +24,11 @@ test_expect_success 'check corruption' ' ' test_expect_success 'rev-list notices corruption (1)' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list HEAD + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list HEAD ' test_expect_success 'rev-list notices corruption (2)' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list --objects HEAD + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list --objects HEAD ' test_expect_success 'pack-objects notices corruption' ' diff --git a/t/t5309-pack-delta-cycles.sh b/t/t5309-pack-delta-cycles.sh index 491556da..55b7876 100755 --- a/t/t5309-pack-delta-cycles.sh +++ b/t/t5309-pack-delta-cycles.sh @@ -4,15 +4,9 @@ test_description='test index-pack handling of delta cycles in packfiles' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-pack.sh -if ! test_have_prereq SHA1 -then - skip_all='not using SHA-1 for objects' - test_done -fi - # Two similar-ish objects that we have computed deltas between. -A=01d7713666f4de822776c7622c10f1b07de280dc -B=e68fe8129b546b101aee9510c5328e7f21ca1d18 +A=$(test_oid packlib_7_0) +B=$(test_oid packlib_7_76) # double-check our hand-constucted packs test_expect_success 'index-pack works with a single delta (A->B)' ' @@ -62,13 +56,13 @@ test_expect_success 'index-pack detects REF_DELTA cycles' ' test_must_fail git index-pack --fix-thin --stdin <cycle.pack ' -test_expect_failure 'failover to an object in another pack' ' +test_expect_success 'failover to an object in another pack' ' clear_packs && git index-pack --stdin <ab.pack && - git index-pack --stdin --fix-thin <cycle.pack + test_must_fail git index-pack --stdin --fix-thin <cycle.pack ' -test_expect_failure 'failover to a duplicate object in the same pack' ' +test_expect_success 'failover to a duplicate object in the same pack' ' clear_packs && { pack_header 3 && @@ -77,7 +71,7 @@ test_expect_failure 'failover to a duplicate object in the same pack' ' pack_obj $A } >recoverable.pack && pack_trailer recoverable.pack && - git index-pack --fix-thin --stdin <recoverable.pack + test_must_fail git index-pack --fix-thin --stdin <recoverable.pack ' test_done diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh index 82d7f7f..8318781 100755 --- a/t/t5310-pack-bitmaps.sh +++ b/t/t5310-pack-bitmaps.sh @@ -21,21 +21,14 @@ has_any () { } test_expect_success 'setup repo with moderate-sized history' ' - for i in $(test_seq 1 10) - do - test_commit $i - done && + test_commit_bulk --id=file 100 && git checkout -b other HEAD~5 && - for i in $(test_seq 1 10) - do - test_commit side-$i - done && + test_commit_bulk --id=side 10 && git checkout master && bitmaptip=$(git rev-parse master) && blob=$(echo tagged-blob | git hash-object -w --stdin) && git tag tagged-blob $blob && - git config repack.writebitmaps true && - git config pack.writebitmaphashcache true + git config repack.writebitmaps true ' test_expect_success 'full repack creates bitmaps' ' @@ -81,16 +74,24 @@ rev_list_tests() { test_cmp expect actual ' - test_expect_success "enumerate --objects ($state)" ' - git rev-list --objects --use-bitmap-index HEAD >tmp && - cut -d" " -f1 <tmp >tmp2 && - sort <tmp2 >actual && - git rev-list --objects HEAD >tmp && - cut -d" " -f1 <tmp >tmp2 && - sort <tmp2 >expect && + test_expect_success "counting objects via bitmap ($state)" ' + git rev-list --count --objects HEAD >expect && + git rev-list --use-bitmap-index --count --objects HEAD >actual && test_cmp expect actual ' + test_expect_success "enumerate commits ($state)" ' + git rev-list --use-bitmap-index HEAD >actual && + git rev-list HEAD >expect && + test_bitmap_traversal --no-confirm-bitmaps expect actual + ' + + test_expect_success "enumerate --objects ($state)" ' + git rev-list --objects --use-bitmap-index HEAD >actual && + git rev-list --objects HEAD >expect && + test_bitmap_traversal expect actual + ' + test_expect_success "bitmap --objects handles non-commit objects ($state)" ' git rev-list --objects --use-bitmap-index HEAD tagged-blob >actual && grep $blob actual @@ -106,11 +107,22 @@ test_expect_success 'clone from bitmapped repository' ' test_cmp expect actual ' +test_expect_success 'partial clone from bitmapped repository' ' + test_config uploadpack.allowfilter true && + git clone --no-local --bare --filter=blob:none . partial-clone.git && + ( + cd partial-clone.git && + pack=$(echo objects/pack/*.pack) && + git verify-pack -v "$pack" >have && + awk "/blob/ { print \$1 }" <have >blobs && + # we expect this single blob because of the direct ref + git rev-parse refs/tags/tagged-blob >expect && + test_cmp expect blobs + ) +' + test_expect_success 'setup further non-bitmapped commits' ' - for i in $(test_seq 1 10) - do - test_commit further-$i - done + test_commit_bulk --id=further 10 ' rev_list_tests 'partial bitmap' @@ -269,7 +281,7 @@ test_expect_success JGIT 'we can read jgit bitmaps' ' git clone --bare . compat-jgit.git && ( cd compat-jgit.git && - rm -f .git/objects/pack/*.bitmap && + rm -f objects/pack/*.bitmap && jgit gc && git rev-list --test-bitmap HEAD ) diff --git a/t/t5313-pack-bounds-checks.sh b/t/t5313-pack-bounds-checks.sh index f1708d4..2a4557e 100755 --- a/t/t5313-pack-bounds-checks.sh +++ b/t/t5313-pack-bounds-checks.sh @@ -38,16 +38,27 @@ munge () { # for the initial, and another ofs(4*nr) past that for the extended. # ofs_table () { - echo $((4 + 4 + 4*256 + 20*$1 + 4*$1)) + echo $((4 + 4 + 4*256 + $(test_oid rawsz)*$1 + 4*$1)) } extended_table () { echo $(($(ofs_table "$1") + 4*$1)) } +test_expect_success 'setup' ' + test_oid_init && + test_oid_cache <<-EOF + oid000 sha1:1485 + oid000 sha256:4222 + + oidfff sha1:74 + oidfff sha256:1350 + EOF +' + test_expect_success 'set up base packfile and variables' ' # the hash of this content starts with ff, which # makes some later computations much simpler - echo 74 >file && + echo $(test_oid oidfff) >file && git add file && git commit -m base && git repack -ad && @@ -140,10 +151,10 @@ test_expect_success 'bogus offset inside v2 extended table' ' # an extended table (if the first object were larger than 2^31). # # Note that the value is important here. We want $object as - # the second entry in sorted-sha1 order. The sha1 of 1485 starts + # the second entry in sorted-hash order. The hash of this object starts # with "000", which sorts before that of $object (which starts # with "fff"). - second=$(echo 1485 | git hash-object -w --stdin) && + second=$(test_oid oid000 | git hash-object -w --stdin) && do_pack "$object $second" --index-version=2 && # We have to make extra room for the table, so we cannot diff --git a/t/t5314-pack-cycle-detection.sh b/t/t5314-pack-cycle-detection.sh index e525466..0aec861 100755 --- a/t/t5314-pack-cycle-detection.sh +++ b/t/t5314-pack-cycle-detection.sh @@ -53,7 +53,7 @@ immediately after the lookup for "dummy". -# Create a pack containing the the tree $1 and blob $1:file, with +# Create a pack containing the tree $1 and blob $1:file, with # the latter stored as a delta against $2:file. # # We convince pack-objects to make the delta in the direction of our choosing diff --git a/t/t5315-pack-objects-compression.sh b/t/t5315-pack-objects-compression.sh index 34c47da..df970d7 100755 --- a/t/t5315-pack-objects-compression.sh +++ b/t/t5315-pack-objects-compression.sh @@ -7,7 +7,7 @@ test_description='pack-object compression configuration' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } test_expect_success setup ' diff --git a/t/t5317-pack-objects-filter-objects.sh b/t/t5317-pack-objects-filter-objects.sh index 24541ea..dc04465 100755 --- a/t/t5317-pack-objects-filter-objects.sh +++ b/t/t5317-pack-objects-filter-objects.sh @@ -25,7 +25,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r1 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r1 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r1 index-pack ../all.pack && @@ -39,18 +39,13 @@ test_expect_success 'verify blob count in normal packfile' ' ' test_expect_success 'verify blob:none packfile has no blobs' ' - git -C r1 pack-objects --rev --stdout --filter=blob:none >filter.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=blob:none >filter.pack <<-EOF && HEAD EOF git -C r1 index-pack ../filter.pack && git -C r1 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify normal and blob:none packfiles have same commits/trees' ' @@ -72,9 +67,10 @@ test_expect_success 'get an error for missing tree object' ' echo foo >r5/foo && git -C r5 add foo && git -C r5 commit -m "foo" && - del=$(git -C r5 rev-parse HEAD^{tree} | sed "s|..|&/|") && + git -C r5 rev-parse HEAD^{tree} >tree && + del=$(sed "s|..|&/|" tree) && rm r5/.git/objects/$del && - test_must_fail git -C r5 pack-objects --rev --stdout 2>bad_tree <<-EOF && + test_must_fail git -C r5 pack-objects --revs --stdout 2>bad_tree <<-EOF && HEAD EOF grep "bad tree object" bad_tree @@ -88,7 +84,7 @@ test_expect_success 'setup for tests of tree:0' ' ' test_expect_success 'verify tree:0 packfile has no blobs or trees' ' - git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=tree:0 >commitsonly.pack <<-EOF && HEAD EOF git -C r1 index-pack ../commitsonly.pack && @@ -98,7 +94,7 @@ test_expect_success 'verify tree:0 packfile has no blobs or trees' ' test_expect_success 'grab tree directly when using tree:0' ' # We should get the tree specified directly but not its blobs or subtrees. - git -C r1 pack-objects --rev --stdout --filter=tree:0 >commitsonly.pack <<-EOF && + git -C r1 pack-objects --revs --stdout --filter=tree:0 >commitsonly.pack <<-EOF && HEAD: EOF git -C r1 index-pack ../commitsonly.pack && @@ -128,7 +124,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r2 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r2 index-pack ../all.pack && @@ -142,33 +138,23 @@ test_expect_success 'verify blob count in normal packfile' ' ' test_expect_success 'verify blob:limit=500 omits all blobs' ' - git -C r2 pack-objects --rev --stdout --filter=blob:limit=500 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=500 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify blob:limit=1000' ' - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1000 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1000 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - nr=$(wc -l <observed) && - test 0 -eq $nr + ! grep blob verify_result ' test_expect_success 'verify blob:limit=1001' ' @@ -176,7 +162,7 @@ test_expect_success 'verify blob:limit=1001' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -194,7 +180,7 @@ test_expect_success 'verify blob:limit=10001' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=10001 >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -212,7 +198,7 @@ test_expect_success 'verify blob:limit=1k' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -230,10 +216,9 @@ test_expect_success 'verify explicitly specifying oversized blob in input' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1k >filter.pack <<-EOF && - HEAD - $(git -C r2 rev-parse HEAD:large.10000) - EOF + echo HEAD >objects && + git -C r2 rev-parse HEAD:large.10000 >>objects && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1k <objects >filter.pack && git -C r2 index-pack ../filter.pack && git -C r2 verify-pack -v ../filter.pack >verify_result && @@ -249,7 +234,7 @@ test_expect_success 'verify blob:limit=1m' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r2 pack-objects --rev --stdout --filter=blob:limit=1m >filter.pack <<-EOF && + git -C r2 pack-objects --revs --stdout --filter=blob:limit=1m >filter.pack <<-EOF && HEAD EOF git -C r2 index-pack ../filter.pack && @@ -277,6 +262,10 @@ test_expect_success 'verify normal and blob:limit packfiles have same commits/tr ' # Test sparse:path=<path> filter. +# !!!! +# NOTE: sparse:path filter support has been dropped for security reasons, +# so the tests have been changed to make sure that using it fails. +# !!!! # Use a local file containing a sparse-checkout specification to filter # out blobs not required for the corresponding sparse-checkout. We do not # require sparse-checkout to actually be enabled. @@ -302,7 +291,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r3 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r3 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r3 index-pack ../all.pack && @@ -315,73 +304,24 @@ test_expect_success 'verify blob count in normal packfile' ' test_cmp expected observed ' -test_expect_success 'verify sparse:path=pattern1' ' - git -C r3 ls-files -s dir1/sparse1 dir1/sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern1 >filter.pack <<-EOF && +test_expect_success 'verify sparse:path=pattern1 fails' ' + test_must_fail git -C r3 pack-objects --revs --stdout \ + --filter=sparse:path=../pattern1 <<-EOF HEAD EOF - git -C r3 index-pack ../filter.pack && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed -' - -test_expect_success 'verify normal and sparse:path=pattern1 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >expected && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed ' -test_expect_success 'verify sparse:path=pattern2' ' - git -C r3 ls-files -s sparse1 dir1/sparse1 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 pack-objects --rev --stdout --filter=sparse:path=../pattern2 >filter.pack <<-EOF && +test_expect_success 'verify sparse:path=pattern2 fails' ' + test_must_fail git -C r3 pack-objects --revs --stdout \ + --filter=sparse:path=../pattern2 <<-EOF HEAD EOF - git -C r3 index-pack ../filter.pack && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep blob verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed -' - -test_expect_success 'verify normal and sparse:path=pattern2 packfiles have same commits/trees' ' - git -C r3 verify-pack -v ../all.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >expected && - - git -C r3 verify-pack -v ../filter.pack >verify_result && - grep -E "commit|tree" verify_result | - awk -f print_1.awk | - sort >observed && - - test_cmp expected observed ' # Test sparse:oid=<oid-ish> filter. -# Like sparse:path, but we get the sparse-checkout specification from -# a blob rather than a file on disk. +# Use a blob containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. test_expect_success 'setup r4' ' git init r4 && @@ -404,7 +344,7 @@ test_expect_success 'verify blob count in normal packfile' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r4 pack-objects --rev --stdout >all.pack <<-EOF && + git -C r4 pack-objects --revs --stdout >all.pack <<-EOF && HEAD EOF git -C r4 index-pack ../all.pack && @@ -422,8 +362,9 @@ test_expect_success 'verify sparse:oid=OID' ' awk -f print_2.awk ls_files_result | sort >expected && - oid=$(git -C r4 ls-files -s pattern | awk -f print_2.awk) && - git -C r4 pack-objects --rev --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && + git -C r4 ls-files -s pattern >staged && + oid=$(awk -f print_2.awk staged) && + git -C r4 pack-objects --revs --stdout --filter=sparse:oid=$oid >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && @@ -441,7 +382,7 @@ test_expect_success 'verify sparse:oid=oid-ish' ' awk -f print_2.awk ls_files_result | sort >expected && - git -C r4 pack-objects --rev --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && + git -C r4 pack-objects --revs --stdout --filter=sparse:oid=master:pattern >filter.pack <<-EOF && HEAD EOF git -C r4 index-pack ../filter.pack && @@ -470,19 +411,19 @@ test_expect_success 'setup r1 - delete loose blobs' ' ' test_expect_success 'verify pack-objects fails w/ missing objects' ' - test_must_fail git -C r1 pack-objects --rev --stdout >miss.pack <<-EOF + test_must_fail git -C r1 pack-objects --revs --stdout >miss.pack <<-EOF HEAD EOF ' test_expect_success 'verify pack-objects fails w/ --missing=error' ' - test_must_fail git -C r1 pack-objects --rev --stdout --missing=error >miss.pack <<-EOF + test_must_fail git -C r1 pack-objects --revs --stdout --missing=error >miss.pack <<-EOF HEAD EOF ' test_expect_success 'verify pack-objects w/ --missing=allow-any' ' - git -C r1 pack-objects --rev --stdout --missing=allow-any >miss.pack <<-EOF + git -C r1 pack-objects --revs --stdout --missing=allow-any >miss.pack <<-EOF HEAD EOF ' diff --git a/t/t5318-commit-graph.sh b/t/t5318-commit-graph.sh index 5fe21db..9bf920a 100755 --- a/t/t5318-commit-graph.sh +++ b/t/t5318-commit-graph.sh @@ -19,8 +19,15 @@ test_expect_success 'verify graph with no graph file' ' test_expect_success 'write graph with no packs' ' cd "$TRASH_DIRECTORY/full" && - git commit-graph write --object-dir . && - test_path_is_file info/commit-graph + git commit-graph write --object-dir $objdir && + test_path_is_missing $objdir/info/commit-graph +' + +test_expect_success 'exit with correct error on bad input to --stdin-packs' ' + cd "$TRASH_DIRECTORY/full" && + echo doesnotexist >in && + test_expect_code 1 git commit-graph write --stdin-packs <in 2>stderr && + test_i18ngrep "error adding pack" stderr ' test_expect_success 'create commits and repack' ' @@ -33,6 +40,15 @@ test_expect_success 'create commits and repack' ' git repack ' +test_expect_success 'exit with correct error on bad input to --stdin-commits' ' + cd "$TRASH_DIRECTORY/full" && + echo HEAD | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && + test_i18ngrep "invalid commit object id" stderr && + # valid tree OID, but not a commit OID + git rev-parse HEAD^{tree} | test_expect_code 1 git commit-graph write --stdin-commits 2>stderr && + test_i18ngrep "invalid commit object id" stderr +' + graph_git_two_modes() { git -c core.commitGraph=true $1 >output git -c core.commitGraph=false $1 >expect @@ -69,13 +85,13 @@ graph_read_expect() { num_commits: $1 chunks: oid_fanout oid_lookup commit_metadata$OPTIONAL EOF - git commit-graph read >output && + test-tool read-graph >output && test_cmp expect output } test_expect_success 'write graph' ' cd "$TRASH_DIRECTORY/full" && - graph1=$(git commit-graph write) && + git commit-graph write && test_path_is_file $objdir/info/commit-graph && graph_read_expect "3" ' @@ -108,6 +124,42 @@ test_expect_success 'Add more commits' ' git repack ' +test_expect_success 'commit-graph write progress off for redirected stderr' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write 2>err && + test_line_count = 0 err +' + +test_expect_success 'commit-graph write force progress on for stderr' ' + cd "$TRASH_DIRECTORY/full" && + GIT_PROGRESS_DELAY=0 git commit-graph write --progress 2>err && + test_file_not_empty err +' + +test_expect_success 'commit-graph write with the --no-progress option' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph write --no-progress 2>err && + test_line_count = 0 err +' + +test_expect_success 'commit-graph verify progress off for redirected stderr' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph verify 2>err && + test_line_count = 0 err +' + +test_expect_success 'commit-graph verify force progress on for stderr' ' + cd "$TRASH_DIRECTORY/full" && + GIT_PROGRESS_DELAY=0 git commit-graph verify --progress 2>err && + test_file_not_empty err +' + +test_expect_success 'commit-graph verify with the --no-progress option' ' + cd "$TRASH_DIRECTORY/full" && + git commit-graph verify --no-progress 2>err && + test_line_count = 0 err +' + # Current graph structure: # # __M3___ @@ -122,7 +174,7 @@ test_expect_success 'write graph with merges' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "10" "large_edges" + graph_read_expect "10" "extra_edges" ' graph_git_behavior 'merge 1 vs 2' full merge/1 merge/2 @@ -157,7 +209,7 @@ test_expect_success 'write graph with new commit' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'full graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -167,7 +219,7 @@ test_expect_success 'write graph with nothing new' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'cleared graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -177,7 +229,7 @@ test_expect_success 'build graph from latest pack with closure' ' cd "$TRASH_DIRECTORY/full" && cat new-idx | git commit-graph write --stdin-packs && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "9" "large_edges" + graph_read_expect "9" "extra_edges" ' graph_git_behavior 'graph from pack, commit 8 vs merge 1' full commits/8 merge/1 @@ -200,7 +252,7 @@ test_expect_success 'build graph from commits with append' ' cd "$TRASH_DIRECTORY/full" && git rev-parse merge/3 | git commit-graph write --stdin-commits --append && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "10" "large_edges" + graph_read_expect "10" "extra_edges" ' graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -210,7 +262,7 @@ test_expect_success 'build graph using --reachable' ' cd "$TRASH_DIRECTORY/full" && git commit-graph write --reachable && test_path_is_file $objdir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'append graph, commit 8 vs merge 1' full commits/8 merge/1 @@ -231,7 +283,7 @@ test_expect_success 'write graph in bare repo' ' cd "$TRASH_DIRECTORY/bare" && git commit-graph write && test_path_is_file $baredir/info/commit-graph && - graph_read_expect "11" "large_edges" + graph_read_expect "11" "extra_edges" ' graph_git_behavior 'bare repo with graph, commit 8 vs merge 1' bare commits/8 merge/1 @@ -366,24 +418,58 @@ GRAPH_OCTOPUS_DATA_OFFSET=$(($GRAPH_COMMIT_DATA_OFFSET + \ GRAPH_BYTE_OCTOPUS=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4)) GRAPH_BYTE_FOOTER=$(($GRAPH_OCTOPUS_DATA_OFFSET + 4 * $NUM_OCTOPUS_EDGES)) -# usage: corrupt_graph_and_verify <position> <data> <string> +corrupt_graph_setup() { + cd "$TRASH_DIRECTORY/full" && + test_when_finished mv commit-graph-backup $objdir/info/commit-graph && + cp $objdir/info/commit-graph commit-graph-backup +} + +corrupt_graph_verify() { + grepstr=$1 + test_must_fail git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "$grepstr" err && + if test "$2" != "no-copy" + then + cp $objdir/info/commit-graph commit-graph-pre-write-test + fi && + git status --short && + GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD=true git commit-graph write && + git commit-graph verify +} + +# usage: corrupt_graph_and_verify <position> <data> <string> [<zero_pos>] # Manipulates the commit-graph file at the position -# by inserting the data, then runs 'git commit-graph verify' +# by inserting the data, optionally zeroing the file +# starting at <zero_pos>, then runs 'git commit-graph verify' # and places the output in the file 'err'. Test 'err' for # the given string. corrupt_graph_and_verify() { pos=$1 data="${2:-\0}" grepstr=$3 - cd "$TRASH_DIRECTORY/full" && - test_when_finished mv commit-graph-backup $objdir/info/commit-graph && - cp $objdir/info/commit-graph commit-graph-backup && + corrupt_graph_setup && + orig_size=$(wc -c < $objdir/info/commit-graph) && + zero_pos=${4:-${orig_size}} && printf "$data" | dd of="$objdir/info/commit-graph" bs=1 seek="$pos" conv=notrunc && - test_must_fail git commit-graph verify 2>test_err && - grep -v "^+" test_err >err - test_i18ngrep "$grepstr" err + dd of="$objdir/info/commit-graph" bs=1 seek="$zero_pos" if=/dev/null && + generate_zero_bytes $(($orig_size - $zero_pos)) >>"$objdir/info/commit-graph" && + corrupt_graph_verify "$grepstr" + } +test_expect_success POSIXPERM,SANITY 'detect permission problem' ' + corrupt_graph_setup && + chmod 000 $objdir/info/commit-graph && + corrupt_graph_verify "Could not open" "no-copy" +' + +test_expect_success 'detect too small' ' + corrupt_graph_setup && + echo "a small graph" >$objdir/info/commit-graph && + corrupt_graph_verify "too small" +' + test_expect_success 'detect bad signature' ' corrupt_graph_and_verify 0 "\0" \ "graph signature" @@ -395,7 +481,7 @@ test_expect_success 'detect bad version' ' ' test_expect_success 'detect bad hash version' ' - corrupt_graph_and_verify $GRAPH_BYTE_HASH "\02" \ + corrupt_graph_and_verify $GRAPH_BYTE_HASH "\03" \ "hash version" ' @@ -484,11 +570,17 @@ test_expect_success 'detect invalid checksum hash' ' "incorrect checksum" ' +test_expect_success 'detect incorrect chunk count' ' + corrupt_graph_and_verify $GRAPH_BYTE_CHUNK_COUNT "\377" \ + "chunk lookup table entry missing" $GRAPH_CHUNK_LOOKUP_OFFSET +' + test_expect_success 'git fsck (checks commit-graph)' ' cd "$TRASH_DIRECTORY/full" && git fsck && corrupt_graph_and_verify $GRAPH_BYTE_FOOTER "\00" \ "incorrect checksum" && + cp commit-graph-pre-write-test $objdir/info/commit-graph && test_must_fail git fsck ' @@ -529,4 +621,47 @@ test_expect_success 'get_commit_tree_in_graph works for non-the_repository' ' test_cmp expect actual ' +test_expect_success 'corrupt commit-graph write (broken parent)' ' + rm -rf repo && + git init repo && + ( + cd repo && + empty="$(git mktree </dev/null)" && + cat >broken <<-EOF && + tree $empty + parent $ZERO_OID + author whatever <whatever@example.com> 1234 -0000 + committer whatever <whatever@example.com> 1234 -0000 + + broken commit + EOF + broken="$(git hash-object -w -t commit --literally broken)" && + git commit-tree -p "$broken" -m "good commit" "$empty" >good && + test_must_fail git commit-graph write --stdin-commits \ + <good 2>test_err && + test_i18ngrep "unable to parse commit" test_err + ) +' + +test_expect_success 'corrupt commit-graph write (missing tree)' ' + rm -rf repo && + git init repo && + ( + cd repo && + tree="$(git mktree </dev/null)" && + cat >broken <<-EOF && + parent $ZERO_OID + author whatever <whatever@example.com> 1234 -0000 + committer whatever <whatever@example.com> 1234 -0000 + + broken commit + EOF + broken="$(git hash-object -w -t commit --literally broken)" && + git commit-tree -p "$broken" -m "good" "$tree" >good && + test_must_fail git commit-graph write --stdin-commits \ + <good 2>test_err && + test_i18ngrep "unable to parse commit" test_err + ) +' + test_done diff --git a/t/t5319-multi-pack-index.sh b/t/t5319-multi-pack-index.sh index 70926b5..43a7a66 100755 --- a/t/t5319-multi-pack-index.sh +++ b/t/t5319-multi-pack-index.sh @@ -28,6 +28,20 @@ midx_read_expect () { test_cmp expect actual } +test_expect_success 'setup' ' + test_oid_init && + test_oid_cache <<-EOF + idxoff sha1:2999 + idxoff sha256:3739 + + packnameoff sha1:652 + packnameoff sha256:940 + + fanoutoff sha1:1 + fanoutoff sha256:3 + EOF +' + test_expect_success 'write midx with no packs' ' test_when_finished rm -f pack/multi-pack-index && git multi-pack-index --object-dir=. write && @@ -86,13 +100,14 @@ test_expect_success 'write midx with one v1 pack' ' ' midx_git_two_modes () { + git -c core.multiPackIndex=false $1 >expect && + git -c core.multiPackIndex=true $1 >actual && if [ "$2" = "sorted" ] then - git -c core.multiPackIndex=false $1 | sort >expect && - git -c core.multiPackIndex=true $1 | sort >actual - else - git -c core.multiPackIndex=false $1 >expect && - git -c core.multiPackIndex=true $1 >actual + sort <expect >expect.sorted && + mv expect.sorted expect && + sort <actual >actual.sorted && + mv actual.sorted actual fi && test_cmp expect actual } @@ -103,8 +118,8 @@ compare_results_with_midx () { midx_git_two_modes "rev-list --objects --all" && midx_git_two_modes "log --raw" && midx_git_two_modes "count-objects --verbose" && - midx_git_two_modes "cat-file --batch-all-objects --buffer --batch-check" && - midx_git_two_modes "cat-file --batch-all-objects --buffer --batch-check --unsorted" sorted + midx_git_two_modes "cat-file --batch-all-objects --batch-check" && + midx_git_two_modes "cat-file --batch-all-objects --batch-check --unordered" sorted ' } @@ -116,6 +131,20 @@ test_expect_success 'write midx with one v2 pack' ' compare_results_with_midx "one v2 pack" +test_expect_success 'corrupt idx not opened' ' + idx=$(test-tool read-midx $objdir | grep "\.idx\$") && + mv $objdir/pack/$idx backup-$idx && + test_when_finished "mv backup-\$idx \$objdir/pack/\$idx" && + + # This is the minimum size for a sha-1 based .idx; this lets + # us pass perfunctory tests, but anything that actually opens and reads + # the idx file will complain. + test_copy_bytes 1064 <backup-$idx >$objdir/pack/$idx && + + git -c core.multiPackIndex=true rev-list --objects --all 2>err && + test_must_be_empty err +' + test_expect_success 'add more objects' ' for i in $(test_seq 6 10) do @@ -132,6 +161,21 @@ test_expect_success 'write midx with two packs' ' compare_results_with_midx "two packs" +test_expect_success 'write progress off for redirected stderr' ' + git multi-pack-index --object-dir=$objdir write 2>err && + test_line_count = 0 err +' + +test_expect_success 'write force progress on for stderr' ' + git multi-pack-index --object-dir=$objdir --progress write 2>err && + test_file_not_empty err +' + +test_expect_success 'write with the --no-progress option' ' + git multi-pack-index --object-dir=$objdir --no-progress write 2>err && + test_line_count = 0 err +' + test_expect_success 'add more packs' ' for j in $(test_seq 11 20) do @@ -154,6 +198,21 @@ test_expect_success 'verify multi-pack-index success' ' git multi-pack-index verify --object-dir=$objdir ' +test_expect_success 'verify progress off for redirected stderr' ' + git multi-pack-index verify --object-dir=$objdir 2>err && + test_line_count = 0 err +' + +test_expect_success 'verify force progress on for stderr' ' + git multi-pack-index verify --object-dir=$objdir --progress 2>err && + test_file_not_empty err +' + +test_expect_success 'verify with the --no-progress option' ' + git multi-pack-index verify --object-dir=$objdir --no-progress 2>err && + test_line_count = 0 err +' + # usage: corrupt_midx_and_verify <pos> <data> <objdir> <string> corrupt_midx_and_verify() { POS=$1 && @@ -180,7 +239,7 @@ test_expect_success 'verify bad signature' ' "multi-pack-index signature" ' -HASH_LEN=20 +HASH_LEN=$(test_oid rawsz) NUM_OBJECTS=74 MIDX_BYTE_VERSION=4 MIDX_BYTE_OID_VERSION=5 @@ -193,9 +252,9 @@ MIDX_CHUNK_LOOKUP_WIDTH=12 MIDX_OFFSET_PACKNAMES=$(($MIDX_HEADER_SIZE + \ $MIDX_NUM_CHUNKS * $MIDX_CHUNK_LOOKUP_WIDTH)) MIDX_BYTE_PACKNAME_ORDER=$(($MIDX_OFFSET_PACKNAMES + 2)) -MIDX_OFFSET_OID_FANOUT=$(($MIDX_OFFSET_PACKNAMES + 652)) +MIDX_OFFSET_OID_FANOUT=$(($MIDX_OFFSET_PACKNAMES + $(test_oid packnameoff))) MIDX_OID_FANOUT_WIDTH=4 -MIDX_BYTE_OID_FANOUT_ORDER=$((MIDX_OFFSET_OID_FANOUT + 250 * $MIDX_OID_FANOUT_WIDTH + 1)) +MIDX_BYTE_OID_FANOUT_ORDER=$((MIDX_OFFSET_OID_FANOUT + 250 * $MIDX_OID_FANOUT_WIDTH + $(test_oid fanoutoff))) MIDX_OFFSET_OID_LOOKUP=$(($MIDX_OFFSET_OID_FANOUT + 256 * $MIDX_OID_FANOUT_WIDTH)) MIDX_BYTE_OID_LOOKUP=$(($MIDX_OFFSET_OID_LOOKUP + 16 * $HASH_LEN)) MIDX_OFFSET_OBJECT_OFFSETS=$(($MIDX_OFFSET_OID_LOOKUP + $NUM_OBJECTS * $HASH_LEN)) @@ -259,16 +318,31 @@ test_expect_success 'verify incorrect pack-int-id' ' ' test_expect_success 'verify incorrect offset' ' - corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\377" $objdir \ "incorrect object offset" ' test_expect_success 'git-fsck incorrect offset' ' - corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\07" $objdir \ + corrupt_midx_and_verify $MIDX_BYTE_OFFSET "\377" $objdir \ "incorrect object offset" \ "git -c core.multipackindex=true fsck" ' +test_expect_success 'repack progress off for redirected stderr' ' + git multi-pack-index --object-dir=$objdir repack 2>err && + test_line_count = 0 err +' + +test_expect_success 'repack force progress on for stderr' ' + git multi-pack-index --object-dir=$objdir --progress repack 2>err && + test_file_not_empty err +' + +test_expect_success 'repack with the --no-progress option' ' + git multi-pack-index --object-dir=$objdir --no-progress repack 2>err && + test_line_count = 0 err +' + test_expect_success 'repack removes multi-pack-index' ' test_path_is_file $objdir/pack/multi-pack-index && GIT_TEST_MULTI_PACK_INDEX=0 git repack -adf && @@ -327,7 +401,7 @@ test_expect_success 'force some 64-bit offsets with pack-objects' ' pack64=$(git pack-objects --index-version=2,0x40 objects64/pack/test-64 <obj-list) && idx64=objects64/pack/test-64-$pack64.idx && chmod u+w $idx64 && - corrupt_data $idx64 2999 "\02" && + corrupt_data $idx64 $(test_oid idxoff) "\02" && midx64=$(git multi-pack-index --object-dir=objects64 write) && midx_read_expect 1 63 5 objects64 " large-offsets" ' @@ -348,4 +422,212 @@ test_expect_success 'verify incorrect 64-bit offset' ' "incorrect object offset" ' +test_expect_success 'setup expire tests' ' + mkdir dup && + ( + cd dup && + git init && + test-tool genrandom "data" 4096 >large_file.txt && + git update-index --add large_file.txt && + for i in $(test_seq 1 20) + do + test_commit $i + done && + git branch A HEAD && + git branch B HEAD~8 && + git branch C HEAD~13 && + git branch D HEAD~16 && + git branch E HEAD~18 && + git pack-objects --revs .git/objects/pack/pack-A <<-EOF && + refs/heads/A + ^refs/heads/B + EOF + git pack-objects --revs .git/objects/pack/pack-B <<-EOF && + refs/heads/B + ^refs/heads/C + EOF + git pack-objects --revs .git/objects/pack/pack-C <<-EOF && + refs/heads/C + ^refs/heads/D + EOF + git pack-objects --revs .git/objects/pack/pack-D <<-EOF && + refs/heads/D + ^refs/heads/E + EOF + git pack-objects --revs .git/objects/pack/pack-E <<-EOF && + refs/heads/E + EOF + git multi-pack-index write && + cp -r .git/objects/pack .git/objects/pack-backup + ) +' + +test_expect_success 'expire does not remove any packs' ' + ( + cd dup && + ls .git/objects/pack >expect && + git multi-pack-index expire && + ls .git/objects/pack >actual && + test_cmp expect actual + ) +' + +test_expect_success 'expire progress off for redirected stderr' ' + ( + cd dup && + git multi-pack-index expire 2>err && + test_line_count = 0 err + ) +' + +test_expect_success 'expire force progress on for stderr' ' + ( + cd dup && + git multi-pack-index --progress expire 2>err && + test_file_not_empty err + ) +' + +test_expect_success 'expire with the --no-progress option' ' + ( + cd dup && + git multi-pack-index --no-progress expire 2>err && + test_line_count = 0 err + ) +' + +test_expect_success 'expire removes unreferenced packs' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/A + ^refs/heads/C + EOF + git multi-pack-index write && + ls .git/objects/pack | grep -v -e pack-[AB] >expect && + git multi-pack-index expire && + ls .git/objects/pack >actual && + test_cmp expect actual && + ls .git/objects/pack/ | grep idx >expect-idx && + test-tool read-midx .git/objects | grep idx >actual-midx && + test_cmp expect-idx actual-midx && + git multi-pack-index verify && + git fsck + ) +' + +test_expect_success 'repack with minimum size does not alter existing packs' ' + ( + cd dup && + rm -rf .git/objects/pack && + mv .git/objects/pack-backup .git/objects/pack && + touch -m -t 201901010000 .git/objects/pack/pack-D* && + touch -m -t 201901010001 .git/objects/pack/pack-C* && + touch -m -t 201901010002 .git/objects/pack/pack-B* && + touch -m -t 201901010003 .git/objects/pack/pack-A* && + ls .git/objects/pack >expect && + MINSIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 1) && + git multi-pack-index repack --batch-size=$MINSIZE && + ls .git/objects/pack >actual && + test_cmp expect actual + ) +' + +test_expect_success 'repack creates a new pack' ' + ( + cd dup && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 5 idx-list && + THIRD_SMALLEST_SIZE=$(test-tool path-utils file-size .git/objects/pack/*pack | sort -n | head -n 3 | tail -n 1) && + BATCH_SIZE=$(($THIRD_SMALLEST_SIZE + 1)) && + git multi-pack-index repack --batch-size=$BATCH_SIZE && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 6 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 6 midx-list + ) +' + +test_expect_success 'expire removes repacked packs' ' + ( + cd dup && + ls -al .git/objects/pack/*pack && + ls -S .git/objects/pack/*pack | head -n 4 >expect && + git multi-pack-index expire && + ls -S .git/objects/pack/*pack >actual && + test_cmp expect actual && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 4 midx-list + ) +' + +test_expect_success 'expire works when adding new packs' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/A + ^refs/heads/B + EOF + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/B + ^refs/heads/C + EOF + git pack-objects --revs .git/objects/pack/pack-combined <<-EOF && + refs/heads/C + ^refs/heads/D + EOF + git multi-pack-index write && + git pack-objects --revs .git/objects/pack/a-pack <<-EOF && + refs/heads/D + ^refs/heads/E + EOF + git multi-pack-index write && + git pack-objects --revs .git/objects/pack/z-pack <<-EOF && + refs/heads/E + EOF + git multi-pack-index expire && + ls .git/objects/pack/ | grep idx >expect && + test-tool read-midx .git/objects | grep idx >actual && + test_cmp expect actual && + git multi-pack-index verify + ) +' + +test_expect_success 'expire respects .keep files' ' + ( + cd dup && + git pack-objects --revs .git/objects/pack/pack-all <<-EOF && + refs/heads/A + EOF + git multi-pack-index write && + PACKA=$(ls .git/objects/pack/a-pack*\.pack | sed s/\.pack\$//) && + touch $PACKA.keep && + git multi-pack-index expire && + ls -S .git/objects/pack/a-pack* | grep $PACKA >a-pack-files && + test_line_count = 3 a-pack-files && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 2 midx-list + ) +' + +test_expect_success 'repack --batch-size=0 repacks everything' ' + ( + cd dup && + rm .git/objects/pack/*.keep && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 2 idx-list && + git multi-pack-index repack --batch-size=0 && + ls .git/objects/pack/*idx >idx-list && + test_line_count = 3 idx-list && + test-tool read-midx .git/objects | grep idx >midx-list && + test_line_count = 3 midx-list && + git multi-pack-index expire && + ls -al .git/objects/pack/*idx >idx-list && + test_line_count = 1 idx-list && + git multi-pack-index repack --batch-size=0 && + ls -al .git/objects/pack/*idx >new-idx-list && + test_cmp idx-list new-idx-list + ) +' + test_done diff --git a/t/t5321-pack-large-objects.sh b/t/t5321-pack-large-objects.sh index a75eab8..8a56d98 100755 --- a/t/t5321-pack-large-objects.sh +++ b/t/t5321-pack-large-objects.sh @@ -10,8 +10,8 @@ test_description='git pack-object with "large" deltas . "$TEST_DIRECTORY"/lib-pack.sh # Two similar-ish objects that we have computed deltas between. -A=01d7713666f4de822776c7622c10f1b07de280dc -B=e68fe8129b546b101aee9510c5328e7f21ca1d18 +A=$(test_oid packlib_7_0) +B=$(test_oid packlib_7_76) test_expect_success 'setup' ' clear_packs && diff --git a/t/t5322-pack-objects-sparse.sh b/t/t5322-pack-objects-sparse.sh new file mode 100755 index 0000000..7124b55 --- /dev/null +++ b/t/t5322-pack-objects-sparse.sh @@ -0,0 +1,136 @@ +#!/bin/sh + +test_description='pack-objects object selection using sparse algorithm' +. ./test-lib.sh + +test_expect_success 'setup repo' ' + test_commit initial && + for i in $(test_seq 1 3) + do + mkdir f$i && + for j in $(test_seq 1 3) + do + mkdir f$i/f$j && + echo $j >f$i/f$j/data.txt + done + done && + git add . && + git commit -m "Initialized trees" && + for i in $(test_seq 1 3) + do + git checkout -b topic$i master && + echo change-$i >f$i/f$i/data.txt && + git commit -a -m "Changed f$i/f$i/data.txt" + done && + cat >packinput.txt <<-EOF && + topic1 + ^topic2 + ^topic3 + EOF + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f1 \ + topic1:f1/f1 \ + topic1:f1/f1/data.txt | sort >expect_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + test_cmp expect_objects.txt nonsparse_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_objects.txt sparse_objects.txt +' + +test_expect_success 'duplicate a folder from f3 and commit to topic1' ' + git checkout topic1 && + echo change-3 >f3/f3/data.txt && + git commit -a -m "Changed f3/f3/data.txt" && + git rev-parse \ + topic1~1 \ + topic1~1^{tree} \ + topic1^{tree} \ + topic1 \ + topic1:f1 \ + topic1:f1/f1 \ + topic1:f1/f1/data.txt | sort >required_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + comm -1 -2 required_objects.txt nonsparse_objects.txt >nonsparse_required_objects.txt && + test_cmp required_objects.txt nonsparse_required_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + comm -1 -2 required_objects.txt sparse_objects.txt >sparse_required_objects.txt && + test_cmp required_objects.txt sparse_required_objects.txt +' + +# Demonstrate that the algorithms differ when we copy a tree wholesale +# from one folder to another. + +test_expect_success 'duplicate a folder from f1 into f3' ' + mkdir f3/f4 && + cp -r f1/f1/* f3/f4 && + git add f3/f4 && + git commit -m "Copied f1/f1 to f3/f4" && + cat >packinput.txt <<-EOF && + topic1 + ^topic1~1 + EOF + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f3 | sort >required_objects.txt +' + +test_expect_success 'non-sparse pack-objects' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >nonsparse.pack && + git index-pack -o nonsparse.idx nonsparse.pack && + git show-index <nonsparse.idx | awk "{print \$2}" >nonsparse_objects.txt && + comm -1 -2 required_objects.txt nonsparse_objects.txt >nonsparse_required_objects.txt && + test_cmp required_objects.txt nonsparse_required_objects.txt +' + +test_expect_success 'sparse pack-objects' ' + git rev-parse \ + topic1 \ + topic1^{tree} \ + topic1:f3 \ + topic1:f3/f4 \ + topic1:f3/f4/data.txt | sort >expect_sparse_objects.txt && + git pack-objects --stdout --revs --sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_sparse_objects.txt sparse_objects.txt +' + +test_expect_success 'pack.useSparse enables algorithm' ' + git config pack.useSparse true && + git pack-objects --stdout --revs <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp expect_sparse_objects.txt sparse_objects.txt +' + +test_expect_success 'pack.useSparse overridden' ' + git pack-objects --stdout --revs --no-sparse <packinput.txt >sparse.pack && + git index-pack -o sparse.idx sparse.pack && + git show-index <sparse.idx | awk "{print \$2}" >sparse_objects.txt && + test_cmp required_objects.txt sparse_objects.txt +' + +test_done diff --git a/t/t5323-pack-redundant.sh b/t/t5323-pack-redundant.sh new file mode 100755 index 0000000..6b4d1ca --- /dev/null +++ b/t/t5323-pack-redundant.sh @@ -0,0 +1,467 @@ +#!/bin/sh +# +# Copyright (c) 2018 Jiang Xin +# + +test_description='Test git pack-redundant + +In order to test git-pack-redundant, we will create a number of objects and +packs in the repository `master.git`. The relationship between packs (P1-P8) +and objects (T, A-R) is showed in the following chart. Objects of a pack will +be marked with letter x, while objects of redundant packs will be marked with +exclamation point, and redundant pack itself will be marked with asterisk. + + | T A B C D E F G H I J K L M N O P Q R + ----+-------------------------------------- + P1 | x x x x x x x x + P2* | ! ! ! ! ! ! ! + P3 | x x x x x x + P4* | ! ! ! ! ! + P5 | x x x x + P6* | ! ! ! + P7 | x x + P8* | ! + ----+-------------------------------------- + ALL | x x x x x x x x x x x x x x x x x x x + +Another repository `shared.git` has unique objects (X-Z), while other objects +(marked with letter s) are shared through alt-odb (of `master.git`). The +relationship between packs and objects is as follows: + + | T A B C D E F G H I J K L M N O P Q R X Y Z + ----+---------------------------------------------- + Px1 | s s s x x x + Px2 | s s s x x x +' + +. ./test-lib.sh + +master_repo=master.git +shared_repo=shared.git + +# Create commits in <repo> and assign each commit's oid to shell variables +# given in the arguments (A, B, and C). E.g.: +# +# create_commits_in <repo> A B C +# +# NOTE: Avoid calling this function from a subshell since variable +# assignments will disappear when subshell exits. +create_commits_in () { + repo="$1" && + if ! parent=$(git -C "$repo" rev-parse HEAD^{} 2>/dev/null) + then + parent= + fi && + T=$(git -C "$repo" write-tree) && + shift && + while test $# -gt 0 + do + name=$1 && + test_tick && + if test -z "$parent" + then + oid=$(echo $name | git -C "$repo" commit-tree $T) + else + oid=$(echo $name | git -C "$repo" commit-tree -p $parent $T) + fi && + eval $name=$oid && + parent=$oid && + shift || + return 1 + done && + git -C "$repo" update-ref refs/heads/master $oid +} + +# Create pack in <repo> and assign pack id to variable given in the 2nd argument +# (<name>). Commits in the pack will be read from stdin. E.g.: +# +# create_pack_in <repo> <name> <<-EOF +# ... +# EOF +# +# NOTE: commits from stdin should be given using heredoc, not using pipe, and +# avoid calling this function from a subshell since variable assignments will +# disappear when subshell exits. +create_pack_in () { + repo="$1" && + name="$2" && + pack=$(git -C "$repo/objects/pack" pack-objects -q pack) && + eval $name=$pack && + eval P$pack=$name:$pack +} + +format_packfiles () { + sed \ + -e "s#.*/pack-\(.*\)\.idx#\1#" \ + -e "s#.*/pack-\(.*\)\.pack#\1#" | + sort -u | + while read p + do + if test -z "$(eval echo \${P$p})" + then + echo $p + else + eval echo "\${P$p}" + fi + done | + sort +} + +test_expect_success 'setup master repo' ' + git init --bare "$master_repo" && + create_commits_in "$master_repo" A B C D E F G H I J K L M N O P Q R +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2 | x x x x x x x +# P3 | x x x x x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: no redundant for pack 1, 2, 3' ' + create_pack_in "$master_repo" P1 <<-EOF && + $T + $A + $B + $C + $D + $E + $F + $R + EOF + create_pack_in "$master_repo" P2 <<-EOF && + $B + $C + $D + $E + $G + $H + $I + EOF + create_pack_in "$master_repo" P3 <<-EOF && + $F + $I + $J + $K + $L + $M + EOF + ( + cd "$master_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2 | x x x x x x x +# P3* | ! ! ! ! ! ! +# P4 | x x x x x +# P5 | x x x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: one of pack-2/pack-3 is redundant' ' + create_pack_in "$master_repo" P4 <<-EOF && + $J + $K + $L + $M + $P + EOF + create_pack_in "$master_repo" P5 <<-EOF && + $G + $H + $N + $O + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P3:$P3 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2* | ! ! ! ! ! ! ! +# P3 | x x x x x x +# P4* | ! ! ! ! ! +# P5 | x x x x +# P6* | ! ! ! +# P7 | x x +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: pack 2, 4, and 6 are redundant' ' + create_pack_in "$master_repo" P6 <<-EOF && + $N + $O + $Q + EOF + create_pack_in "$master_repo" P7 <<-EOF && + $P + $Q + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P2:$P2 + P4:$P4 + P6:$P6 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# | T A B C D E F G H I J K L M N O P Q R +# ----+-------------------------------------- +# P1 | x x x x x x x x +# P2* | ! ! ! ! ! ! ! +# P3 | x x x x x x +# P4* | ! ! ! ! ! +# P5 | x x x x +# P6* | ! ! ! +# P7 | x x +# P8* | ! +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'master: pack-8 (subset of pack-1) is also redundant' ' + create_pack_in "$master_repo" P8 <<-EOF && + $A + EOF + ( + cd "$master_repo" && + cat >expect <<-EOF && + P2:$P2 + P4:$P4 + P6:$P6 + P8:$P8 + EOF + git pack-redundant --all >out && + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +test_expect_success 'master: clean loose objects' ' + ( + cd "$master_repo" && + git prune-packed && + find objects -type f | sed -e "/objects\/pack\//d" >out && + test_must_be_empty out + ) +' + +test_expect_success 'master: remove redundant packs and pass fsck' ' + ( + cd "$master_repo" && + git pack-redundant --all | xargs rm && + git fsck && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +# The following test cases will execute inside `shared.git`, instead of +# inside `master.git`. +test_expect_success 'setup shared.git' ' + git clone --mirror "$master_repo" "$shared_repo" && + ( + cd "$shared_repo" && + printf "../../$master_repo/objects\n" >objects/info/alternates + ) +' + +test_expect_success 'shared: all packs are redundant, but no output without --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git =============== | +# | T A B C D E F G H I J K L M N O P Q R <objects/info/alternates> +# ----+-------------------------------------- +# P1* | s s s s s s s s +# P3* | s s s s s s +# P5* | s s s s +# P7* | s s +# ----+-------------------------------------- +# ALL | x x x x x x x x x x x x x x x x x x x +# +############################################################################# +test_expect_success 'shared: show redundant packs in stderr for verbose mode' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + P1:$P1 + P3:$P3 + P5:$P5 + P7:$P7 + EOF + git pack-redundant --all --verbose >out 2>out.err && + test_must_be_empty out && + grep "pack$" out.err | format_packfiles >actual && + test_cmp expect actual + ) +' + +test_expect_success 'shared: remove redundant packs, no packs left' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + fatal: Zero packs found! + EOF + git pack-redundant --all --alt-odb | xargs rm && + git fsck && + test_must_fail git pack-redundant --all --alt-odb >actual 2>&1 && + test_cmp expect actual + ) +' + +test_expect_success 'shared: create new objects and packs' ' + create_commits_in "$shared_repo" X Y Z && + create_pack_in "$shared_repo" Px1 <<-EOF && + $X + $Y + $Z + $A + $B + $C + EOF + create_pack_in "$shared_repo" Px2 <<-EOF + $X + $Y + $Z + $D + $E + $F + EOF +' + +test_expect_success 'shared: no redundant without --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all >out && + test_must_be_empty out + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git ======================= | +# | T A B C D E F G H I J K L M N O P Q R X Y Z <objects/info/alternates> +# ----+---------------------------------------------- +# Px1 | s s s x x x +# Px2*| s s s ! ! ! +# ----+---------------------------------------------- +# ALL | s s s s s s s s s s s s s s s s s s s x x x +# +############################################################################# +test_expect_success 'shared: one pack is redundant with --alt-odb' ' + ( + cd "$shared_repo" && + git pack-redundant --all --alt-odb >out && + format_packfiles <out >actual && + test_line_count = 1 actual + ) +' + +############################################################################# +# Chart of packs and objects for this test case +# +# ================ master.git =============== +# | T A B C D E F G H I J K L M N O P Q R <----------------+ +# ----+-------------------------------------- | +# P1 | x x x x x x x x | +# P3 | x x x x x x | +# P5 | x x x x | +# P7 | x x | +# ----+-------------------------------------- | +# ALL | x x x x x x x x x x x x x x x x x x x | +# | +# | +# ================ shared.git ======================= | +# | T A B C D E F G H I J K L M N O P Q R X Y Z <objects/info/alternates> +# ----+---------------------------------------------- +# Px1*| s s s i i i +# Px2*| s s s i i i +# ----+---------------------------------------------- +# ALL | s s s s s s s s s s s s s s s s s s s i i i +# (ignored objects, marked with i) +# +############################################################################# +test_expect_success 'shared: ignore unique objects and all two packs are redundant' ' + ( + cd "$shared_repo" && + cat >expect <<-EOF && + Px1:$Px1 + Px2:$Px2 + EOF + git pack-redundant --all --alt-odb >out <<-EOF && + $X + $Y + $Z + EOF + format_packfiles <out >actual && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t5324-split-commit-graph.sh b/t/t5324-split-commit-graph.sh new file mode 100755 index 0000000..53b2e6b --- /dev/null +++ b/t/t5324-split-commit-graph.sh @@ -0,0 +1,354 @@ +#!/bin/sh + +test_description='split commit graph' +. ./test-lib.sh + +GIT_TEST_COMMIT_GRAPH=0 + +test_expect_success 'setup repo' ' + git init && + git config core.commitGraph true && + git config gc.writeCommitGraph false && + infodir=".git/objects/info" && + graphdir="$infodir/commit-graphs" && + test_oid_init && + test_oid_cache <<-EOM + shallow sha1:1760 + shallow sha256:2064 + + base sha1:1376 + base sha256:1496 + EOM +' + +graph_read_expect() { + NUM_BASE=0 + if test ! -z $2 + then + NUM_BASE=$2 + fi + cat >expect <<- EOF + header: 43475048 1 1 3 $NUM_BASE + num_commits: $1 + chunks: oid_fanout oid_lookup commit_metadata + EOF + test-tool read-graph >output && + test_cmp expect output +} + +test_expect_success 'create commits and write commit-graph' ' + for i in $(test_seq 3) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git commit-graph write --reachable && + test_path_is_file $infodir/commit-graph && + graph_read_expect 3 +' + +graph_git_two_modes() { + git -c core.commitGraph=true $1 >output + git -c core.commitGraph=false $1 >expect + test_cmp expect output +} + +graph_git_behavior() { + MSG=$1 + BRANCH=$2 + COMPARE=$3 + test_expect_success "check normal git operations: $MSG" ' + graph_git_two_modes "log --oneline $BRANCH" && + graph_git_two_modes "log --topo-order $BRANCH" && + graph_git_two_modes "log --graph $COMPARE..$BRANCH" && + graph_git_two_modes "branch -vv" && + graph_git_two_modes "merge-base -a $BRANCH $COMPARE" + ' +} + +graph_git_behavior 'graph exists' commits/3 commits/1 + +verify_chain_files_exist() { + for hash in $(cat $1/commit-graph-chain) + do + test_path_is_file $1/graph-$hash.graph || return 1 + done +} + +test_expect_success 'add more commits, and write a new base graph' ' + git reset --hard commits/1 && + for i in $(test_seq 4 5) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git reset --hard commits/2 && + for i in $(test_seq 6 10) + do + test_commit $i && + git branch commits/$i || return 1 + done && + git reset --hard commits/2 && + git merge commits/4 && + git branch merge/1 && + git reset --hard commits/4 && + git merge commits/6 && + git branch merge/2 && + git commit-graph write --reachable && + graph_read_expect 12 +' + +test_expect_success 'fork and fail to base a chain on a commit-graph file' ' + test_when_finished rm -rf fork && + git clone . fork && + ( + cd fork && + rm .git/objects/info/commit-graph && + echo "$(pwd)/../.git/objects" >.git/objects/info/alternates && + test_commit new-commit && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 1 $graphdir/commit-graph-chain && + verify_chain_files_exist $graphdir + ) +' + +test_expect_success 'add three more commits, write a tip graph' ' + git reset --hard commits/3 && + git merge merge/1 && + git merge commits/5 && + git merge merge/2 && + git branch merge/3 && + git commit-graph write --reachable --split && + test_path_is_missing $infodir/commit-graph && + test_path_is_file $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 2 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'split commit-graph: merge 3 vs 2' merge/3 merge/2 + +test_expect_success 'add one commit, write a tip graph' ' + test_commit 11 && + git branch commits/11 && + git commit-graph write --reachable --split && + test_path_is_missing $infodir/commit-graph && + test_path_is_file $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 3 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'three-layer commit-graph: commit 11 vs 6' commits/11 commits/6 + +test_expect_success 'add one commit, write a merged graph' ' + test_commit 12 && + git branch commits/12 && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 2 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 2 graph-files && + verify_chain_files_exist $graphdir +' + +graph_git_behavior 'merged commit-graph: commit 12 vs 6' commits/12 commits/6 + +test_expect_success 'create fork and chain across alternate' ' + git clone . fork && + ( + cd fork && + git config core.commitGraph true && + rm -rf $graphdir && + echo "$(pwd)/../.git/objects" >.git/objects/info/alternates && + test_commit 13 && + git branch commits/13 && + git commit-graph write --reachable --split && + test_path_is_file $graphdir/commit-graph-chain && + test_line_count = 3 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files && + git -c core.commitGraph=true rev-list HEAD >expect && + git -c core.commitGraph=false rev-list HEAD >actual && + test_cmp expect actual && + test_commit 14 && + git commit-graph write --reachable --split --object-dir=.git/objects/ && + test_line_count = 3 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) +' + +graph_git_behavior 'alternate: commit 13 vs 6' commits/13 commits/6 + +test_expect_success 'test merge stragety constants' ' + git clone . merge-2 && + ( + cd merge-2 && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 14 && + git commit-graph write --reachable --split --size-multiple=2 && + test_line_count = 3 $graphdir/commit-graph-chain + + ) && + git clone . merge-10 && + ( + cd merge-10 && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 14 && + git commit-graph write --reachable --split --size-multiple=10 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) && + git clone . merge-10-expire && + ( + cd merge-10-expire && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 15 && + git commit-graph write --reachable --split --size-multiple=10 --expire-time=1980-01-01 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 3 graph-files + ) && + git clone --no-hardlinks . max-commits && + ( + cd max-commits && + git config core.commitGraph true && + test_line_count = 2 $graphdir/commit-graph-chain && + test_commit 16 && + test_commit 17 && + git commit-graph write --reachable --split --max-commits=1 && + test_line_count = 1 $graphdir/commit-graph-chain && + ls $graphdir/graph-*.graph >graph-files && + test_line_count = 1 graph-files + ) +' + +test_expect_success 'remove commit-graph-chain file after flattening' ' + git clone . flatten && + ( + cd flatten && + test_line_count = 2 $graphdir/commit-graph-chain && + git commit-graph write --reachable && + test_path_is_missing $graphdir/commit-graph-chain && + ls $graphdir >graph-files && + test_line_count = 0 graph-files + ) +' + +corrupt_file() { + file=$1 + pos=$2 + data="${3:-\0}" + chmod a+w "$file" && + printf "$data" | dd of="$file" bs=1 seek="$pos" conv=notrunc +} + +test_expect_success 'verify hashes along chain, even in shallow' ' + git clone --no-hardlinks . verify && + ( + cd verify && + git commit-graph verify && + base_file=$graphdir/graph-$(head -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" $(test_oid shallow) "\01" && + test_must_fail git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "incorrect checksum" err + ) +' + +test_expect_success 'verify --shallow does not check base contents' ' + git clone --no-hardlinks . verify-shallow && + ( + cd verify-shallow && + git commit-graph verify && + base_file=$graphdir/graph-$(head -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" 1000 "\01" && + git commit-graph verify --shallow && + test_must_fail git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "incorrect checksum" err + ) +' + +test_expect_success 'warn on base graph chunk incorrect' ' + git clone --no-hardlinks . base-chunk && + ( + cd base-chunk && + git commit-graph verify && + base_file=$graphdir/graph-$(tail -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$base_file" $(test_oid base) "\01" && + git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "commit-graph chain does not match" err + ) +' + +test_expect_success 'verify after commit-graph-chain corruption' ' + git clone --no-hardlinks . verify-chain && + ( + cd verify-chain && + corrupt_file "$graphdir/commit-graph-chain" 60 "G" && + git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "invalid commit-graph chain" err && + corrupt_file "$graphdir/commit-graph-chain" 60 "A" && + git commit-graph verify 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "unable to find all commit-graph files" err + ) +' + +test_expect_success 'verify across alternates' ' + git clone --no-hardlinks . verify-alt && + ( + cd verify-alt && + rm -rf $graphdir && + altdir="$(pwd)/../.git/objects" && + echo "$altdir" >.git/objects/info/alternates && + git commit-graph verify --object-dir="$altdir/" && + test_commit extra && + git commit-graph write --reachable --split && + tip_file=$graphdir/graph-$(tail -n 1 $graphdir/commit-graph-chain).graph && + corrupt_file "$tip_file" 100 "\01" && + test_must_fail git commit-graph verify --shallow 2>test_err && + grep -v "^+" test_err >err && + test_i18ngrep "commit-graph has incorrect fanout value" err + ) +' + +test_expect_success 'add octopus merge' ' + git reset --hard commits/10 && + git merge commits/3 commits/4 && + git branch merge/octopus && + git commit-graph write --reachable --split && + git commit-graph verify --progress 2>err && + test_line_count = 3 err && + test_i18ngrep ! warning err && + test_line_count = 3 $graphdir/commit-graph-chain +' + +graph_git_behavior 'graph exists' merge/octopus commits/12 + +test_expect_success 'split across alternate where alternate is not split' ' + git commit-graph write --reachable && + test_path_is_file .git/objects/info/commit-graph && + cp .git/objects/info/commit-graph . && + git clone --no-hardlinks . alt-split && + ( + cd alt-split && + rm -f .git/objects/info/commit-graph && + echo "$(pwd)"/../.git/objects >.git/objects/info/alternates && + test_commit 18 && + git commit-graph write --reachable --split && + test_line_count = 1 $graphdir/commit-graph-chain + ) && + test_cmp commit-graph .git/objects/info/commit-graph +' + +test_done diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh index f1932ea..b84618c 100755 --- a/t/t5400-send-pack.sh +++ b/t/t5400-send-pack.sh @@ -288,7 +288,7 @@ test_expect_success 'receive-pack de-dupes .have lines' ' $shared .have EOF - GIT_TRACE_PACKET=$(pwd)/trace \ + GIT_TRACE_PACKET=$(pwd)/trace GIT_TEST_PROTOCOL_VERSION=0 \ git push \ --receive-pack="unset GIT_TRACE_PACKET; git-receive-pack" \ fork HEAD:foo && diff --git a/t/t5403-post-checkout-hook.sh b/t/t5403-post-checkout-hook.sh index fc898c9..a39b3b5 100755 --- a/t/t5403-post-checkout-hook.sh +++ b/t/t5403-post-checkout-hook.sh @@ -7,82 +7,70 @@ test_description='Test the post-checkout hook.' . ./test-lib.sh test_expect_success setup ' - echo Data for commit0. >a && - echo Data for commit0. >b && - git update-index --add a && - git update-index --add b && - tree0=$(git write-tree) && - commit0=$(echo setup | git commit-tree $tree0) && - git update-ref refs/heads/master $commit0 && - git clone ./. clone1 && - git clone ./. clone2 && - GIT_DIR=clone2/.git git branch new2 && - echo Data for commit1. >clone2/b && - GIT_DIR=clone2/.git git add clone2/b && - GIT_DIR=clone2/.git git commit -m new2 -' - -for clone in 1 2; do - cat >clone${clone}/.git/hooks/post-checkout <<'EOF' -#!/bin/sh -echo $@ > $GIT_DIR/post-checkout.args -EOF - chmod u+x clone${clone}/.git/hooks/post-checkout -done - -test_expect_success 'post-checkout runs as expected ' ' - GIT_DIR=clone1/.git git checkout master && - test -e clone1/.git/post-checkout.args + mkdir -p .git/hooks && + write_script .git/hooks/post-checkout <<-\EOF && + echo "$@" >.git/post-checkout.args + EOF + test_commit one && + test_commit two && + test_commit rebase-on-me && + git reset --hard HEAD^ && + test_commit three ' test_expect_success 'post-checkout receives the right arguments with HEAD unchanged ' ' - old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout master && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 1 ' -test_expect_success 'post-checkout runs as expected ' ' - GIT_DIR=clone1/.git git checkout master && - test -e clone1/.git/post-checkout.args -' - test_expect_success 'post-checkout args are correct with git checkout -b ' ' - GIT_DIR=clone1/.git git checkout -b new1 && - old=$(awk "{print \$1}" clone1/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone1/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone1/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b new1 && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args with HEAD changed ' ' - GIT_DIR=clone2/.git git checkout new2 && - old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout two && + read old new flag <.git/post-checkout.args && test $old != $new && test $flag = 1 ' test_expect_success 'post-checkout receives the right args when not switching branches ' ' - GIT_DIR=clone2/.git git checkout master b && - old=$(awk "{print \$1}" clone2/.git/post-checkout.args) && - new=$(awk "{print \$2}" clone2/.git/post-checkout.args) && - flag=$(awk "{print \$3}" clone2/.git/post-checkout.args) && + test_when_finished "rm -f .git/post-checkout.args" && + git checkout master -- three.t && + read old new flag <.git/post-checkout.args && test $old = $new && test $flag = 0 ' -if test "$(git config --bool core.filemode)" = true; then -mkdir -p templates/hooks -cat >templates/hooks/post-checkout <<'EOF' -#!/bin/sh -echo $@ > $GIT_DIR/post-checkout.args -EOF -chmod +x templates/hooks/post-checkout +test_expect_success 'post-checkout is triggered on rebase' ' + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b rebase-test master && + rm -f .git/post-checkout.args && + git rebase rebase-on-me && + read old new flag <.git/post-checkout.args && + test $old != $new && test $flag = 1 +' + +test_expect_success 'post-checkout is triggered on rebase with fast-forward' ' + test_when_finished "rm -f .git/post-checkout.args" && + git checkout -b ff-rebase-test rebase-on-me^ && + rm -f .git/post-checkout.args && + git rebase rebase-on-me && + read old new flag <.git/post-checkout.args && + test $old != $new && test $flag = 1 +' test_expect_success 'post-checkout hook is triggered by clone' ' + mkdir -p templates/hooks && + write_script templates/hooks/post-checkout <<-\EOF && + echo "$@" >"$GIT_DIR/post-checkout.args" + EOF git clone --template=templates . clone3 && test -f clone3/.git/post-checkout.args ' -fi test_done diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index 9b2a274..80750a8 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -53,10 +53,10 @@ test_expect_success 'git commit --amend --no-post-rewrite' ' test ! -f post-rewrite.data ' -test_expect_success 'git rebase' ' +test_expect_success 'git rebase --apply' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --onto A B && + test_must_fail git rebase --apply --onto A B && echo C > foo && git add foo && git rebase --continue && @@ -68,29 +68,31 @@ test_expect_success 'git rebase' ' verify_hook_input ' -test_expect_success 'git rebase --skip' ' +test_expect_success 'git rebase --apply --skip' ' git reset --hard D && clear_hook_input && - test_must_fail git rebase --onto A B && + test_must_fail git rebase --apply --onto A B && test_must_fail git rebase --skip && echo D > foo && git add foo && git rebase --continue && echo rebase >expected.args && cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) $(git rev-parse D) $(git rev-parse HEAD) EOF verify_hook_input ' -test_expect_success 'git rebase --skip the last one' ' +test_expect_success 'git rebase --apply --skip the last one' ' git reset --hard F && clear_hook_input && - test_must_fail git rebase --onto D A && + test_must_fail git rebase --apply --onto D A && git rebase --skip && echo rebase >expected.args && cat >expected.data <<-EOF && $(git rev-parse E) $(git rev-parse HEAD) + $(git rev-parse F) $(git rev-parse HEAD) EOF verify_hook_input ' @@ -120,6 +122,38 @@ test_expect_success 'git rebase -m --skip' ' git rebase --continue && echo rebase >expected.args && cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase with implicit use of merge backend' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --keep-empty --onto A B && + echo C > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase --skip with implicit use of merge backend' ' + git reset --hard D && + clear_hook_input && + test_must_fail git rebase --keep-empty --onto A B && + test_must_fail git rebase --skip && + echo D > foo && + git add foo && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) $(git rev-parse D) $(git rev-parse HEAD) EOF verify_hook_input diff --git a/t/t5409-colorize-remote-messages.sh b/t/t5409-colorize-remote-messages.sh index f81b681..5d8f401 100755 --- a/t/t5409-colorize-remote-messages.sh +++ b/t/t5409-colorize-remote-messages.sh @@ -17,6 +17,7 @@ test_expect_success 'setup' ' echo " " "error: leading space" echo " " echo Err + echo SUCCESS exit 0 EOF echo 1 >file && @@ -35,6 +36,7 @@ test_expect_success 'keywords' ' grep "<BOLD;RED>error<RESET>: error" decoded && grep "<YELLOW>hint<RESET>:" decoded && grep "<BOLD;GREEN>success<RESET>:" decoded && + grep "<BOLD;GREEN>SUCCESS<RESET>" decoded && grep "<BOLD;YELLOW>warning<RESET>:" decoded ' @@ -54,14 +56,13 @@ test_expect_success 'short line' ' test_expect_success 'case-insensitive' ' git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/case-insensitive 2>output && - cat output && test_decode_color <output >decoded && grep "<BOLD;RED>error<RESET>: error" decoded && grep "<BOLD;RED>ERROR<RESET>: also highlighted" decoded ' test_expect_success 'leading space' ' - git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/leading-space 2>output && cat output && + git --git-dir child/.git -c color.remote=always push -f origin HEAD:refs/heads/leading-space 2>output && test_decode_color <output >decoded && grep " <BOLD;RED>error<RESET>: leading space" decoded ' diff --git a/t/t5500-fetch-pack.sh b/t/t5500-fetch-pack.sh index 086f2c4..baa1a99 100755 --- a/t/t5500-fetch-pack.sh +++ b/t/t5500-fetch-pack.sh @@ -439,15 +439,24 @@ test_expect_success 'setup tests for the --stdin parameter' ' ) >input.dup ' -test_expect_success 'fetch refs from cmdline' ' - ( - cd client && - git fetch-pack --no-progress .. $(cat ../input) - ) >output && - cut -d " " -f 2 <output | sort >actual && - test_cmp expect actual +test_expect_success 'setup fetch refs from cmdline v[12]' ' + cp -r client client0 && + cp -r client client1 && + cp -r client client2 ' +for version in '' 0 1 2 +do + test_expect_success "protocol.version=$version fetch refs from cmdline" " + ( + cd client$version && + GIT_TEST_PROTOCOL_VERSION=$version git fetch-pack --no-progress .. \$(cat ../input) + ) >output && + cut -d ' ' -f 2 <output | sort >actual && + test_cmp expect actual + " +done + test_expect_success 'fetch refs from stdin' ' ( cd client && @@ -628,7 +637,9 @@ test_expect_success 'fetch-pack cannot fetch a raw sha1 that is not advertised a test_commit -C server 6 && git init client && - test_must_fail git -C client fetch-pack ../server \ + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -C client fetch-pack ../server \ $(git -C server rev-parse refs/heads/master^) 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err ' @@ -698,13 +709,22 @@ do # file with scheme for p in file do - test_expect_success "fetch-pack --diag-url $p://$h/$r" ' + test_expect_success !MINGW "fetch-pack --diag-url $p://$h/$r" ' check_prot_path $p://$h/$r $p "/$r" ' + test_expect_success MINGW "fetch-pack --diag-url $p://$h/$r" ' + check_prot_path $p://$h/$r $p "//$h/$r" + ' + test_expect_success MINGW "fetch-pack --diag-url $p:///$r" ' + check_prot_path $p:///$r $p "/$r" + ' # No "/~" -> "~" conversion for file - test_expect_success "fetch-pack --diag-url $p://$h/~$r" ' + test_expect_success !MINGW "fetch-pack --diag-url $p://$h/~$r" ' check_prot_path $p://$h/~$r $p "/~$r" ' + test_expect_success MINGW "fetch-pack --diag-url $p://$h/~$r" ' + check_prot_path $p://$h/~$r $p "//$h/~$r" + ' done # file without scheme for h in nohost nohost:12 [::1] [::1]:23 [ [:aa @@ -773,6 +793,44 @@ test_expect_success 'clone shallow since selects no commits' ' ) ' +# A few subtle things about the request in this test: +# +# - the server must have commit-graphs present and enabled +# +# - the history is such that our want/have share a common ancestor ("base" +# here) +# +# - we send only a single have, which is fewer than a normal client would +# send. This ensures that we don't parse "base" up front with +# parse_object(), but rather traverse to it as a parent while deciding if we +# can stop the "have" negotiation, and call parse_commit(). The former +# sees the actual object data and so always loads the three oid, whereas the +# latter will try to load it lazily. +# +# - we must use protocol v2, because it handles the "have" negotiation before +# processing the shallow directives +# +test_expect_success 'shallow since with commit graph and already-seen commit' ' + test_create_repo shallow-since-graph && + ( + cd shallow-since-graph && + test_commit base && + test_commit master && + git checkout -b other HEAD^ && + test_commit other && + git commit-graph write --reachable && + git config core.commitGraph true && + + GIT_PROTOCOL=version=2 git upload-pack . <<-EOF >/dev/null + 0012command=fetch + 00010013deepen-since 1 + 0032want $(git rev-parse other) + 0032have $(git rev-parse master) + 0000 + EOF + ) +' + test_expect_success 'shallow clone exclude tag two' ' test_create_repo shallow-exclude && ( @@ -860,7 +918,10 @@ test_expect_success 'filtering by size' ' git -C client fetch-pack --filter=blob:limit=0 ../server HEAD && # Ensure that object is not inadvertently fetched - test_must_fail git -C client cat-file -e $(git hash-object server/one.t) + commit=$(git -C server rev-parse HEAD) && + blob=$(git hash-object server/one.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + ! grep "$blob" oids ' test_expect_success 'filtering by size has no effect if support for it is not advertised' ' @@ -872,7 +933,10 @@ test_expect_success 'filtering by size has no effect if support for it is not ad git -C client fetch-pack --filter=blob:limit=0 ../server HEAD 2> err && # Ensure that object is fetched - git -C client cat-file -e $(git hash-object server/one.t) && + commit=$(git -C server rev-parse HEAD) && + blob=$(git hash-object server/one.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + grep "$blob" oids && test_i18ngrep "filtering not recognized by server" err ' @@ -894,9 +958,11 @@ fetch_filter_blob_limit_zero () { git -C client fetch --filter=blob:limit=0 origin HEAD:somewhere && # Ensure that commit is fetched, but blob is not - test_config -C client extensions.partialclone "arbitrary string" && - git -C client cat-file -e $(git -C "$SERVER" rev-parse two) && - test_must_fail git -C client cat-file -e $(git hash-object "$SERVER/two.t") + commit=$(git -C "$SERVER" rev-parse two) && + blob=$(git hash-object server/two.t) && + git -C client rev-list --objects --missing=allow-any "$commit" >oids && + grep "$commit" oids && + ! grep "$blob" oids } test_expect_success 'fetch with --filter=blob:limit=0' ' @@ -910,7 +976,7 @@ test_expect_success 'fetch with --filter=blob:limit=0 and HTTP' ' fetch_filter_blob_limit_zero "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" ' -stop_httpd - +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5503-tagfollow.sh b/t/t5503-tagfollow.sh index 4ca48f0..6041a4d 100755 --- a/t/t5503-tagfollow.sh +++ b/t/t5503-tagfollow.sh @@ -47,7 +47,7 @@ get_needs () { test -s "$1" && perl -alne ' next unless $F[1] eq "upload-pack<"; - last if $F[2] eq "0000"; + next unless $F[2] eq "want"; print $F[2], " ", $F[3]; ' "$1" } diff --git a/t/t5504-fetch-receive-strict.sh b/t/t5504-fetch-receive-strict.sh index 7bc7068..645b4c7 100755 --- a/t/t5504-fetch-receive-strict.sh +++ b/t/t5504-fetch-receive-strict.sh @@ -4,6 +4,7 @@ test_description='fetch/receive strict mode' . ./test-lib.sh test_expect_success 'setup and inject "corrupt or missing" object' ' + test_oid_init && echo hello >greetings && git add greetings && git commit -m greetings && @@ -144,11 +145,11 @@ test_expect_success 'fsck with no skipList input' ' test_expect_success 'setup sorted and unsorted skipLists' ' cat >SKIP.unsorted <<-EOF && - 0000000000000000000000000000000000000004 - 0000000000000000000000000000000000000002 + $(test_oid 004) + $(test_oid 002) $commit - 0000000000000000000000000000000000000001 - 0000000000000000000000000000000000000003 + $(test_oid 001) + $(test_oid 003) EOF sort SKIP.unsorted >SKIP.sorted ' @@ -164,22 +165,22 @@ test_expect_success 'fsck with unsorted skipList' ' test_expect_success 'fsck with invalid or bogus skipList input' ' git -c fsck.skipList=/dev/null -c fsck.missingEmail=ignore fsck && test_must_fail git -c fsck.skipList=does-not-exist -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && test_must_fail git -c fsck.skipList=.git/config -c fsck.missingEmail=ignore fsck 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err + test_i18ngrep "invalid object name: \[core\]" err ' test_expect_success 'fsck with other accepted skipList input (comments & empty lines)' ' cat >SKIP.with-comment <<-EOF && # Some bad commit - 0000000000000000000000000000000000000001 + $(test_oid 001) EOF test_must_fail git -c fsck.skipList=SKIP.with-comment fsck 2>err-with-comment && test_i18ngrep "missingEmail" err-with-comment && cat >SKIP.with-empty-line <<-EOF && - 0000000000000000000000000000000000000001 + $(test_oid 001) - 0000000000000000000000000000000000000002 + $(test_oid 002) EOF test_must_fail git -c fsck.skipList=SKIP.with-empty-line fsck 2>err-with-empty-line && test_i18ngrep "missingEmail" err-with-empty-line @@ -193,7 +194,7 @@ test_expect_success 'fsck no garbage output from comments & empty lines errors' test_expect_success 'fsck with invalid abbreviated skipList input' ' echo $commit | test_copy_bytes 20 >SKIP.abbreviated && test_must_fail git -c fsck.skipList=SKIP.abbreviated fsck 2>err-abbreviated && - test_i18ngrep "^fatal: Invalid SHA-1: " err-abbreviated + test_i18ngrep "^fatal: invalid object name: " err-abbreviated ' test_expect_success 'fsck with exhaustive accepted skipList input (various types of comments etc.)' ' @@ -204,7 +205,7 @@ test_expect_success 'fsck with exhaustive accepted skipList input (various types echo " # Comment after whitespace" >>SKIP.exhaustive && echo "$commit # Our bad commit (with leading whitespace and trailing comment)" >>SKIP.exhaustive && echo "# Some bad commit (leading whitespace)" >>SKIP.exhaustive && - echo " 0000000000000000000000000000000000000001" >>SKIP.exhaustive && + echo " $(test_oid 001)" >>SKIP.exhaustive && git -c fsck.skipList=SKIP.exhaustive fsck 2>err && test_must_be_empty err ' @@ -226,10 +227,10 @@ test_expect_success 'push with receive.fsck.skipList' ' test_must_fail git push --porcelain dst bogus && git --git-dir=dst/.git config receive.fsck.skipList does-not-exist && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config receive.fsck.skipList config && test_must_fail git push --porcelain dst bogus 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config receive.fsck.skipList SKIP && git push --porcelain dst bogus @@ -255,10 +256,10 @@ test_expect_success 'fetch with fetch.fsck.skipList' ' test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec && git --git-dir=dst/.git config fetch.fsck.skipList does-not-exist && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Could not open skip list: does-not-exist" err && + test_i18ngrep "could not open.*: does-not-exist" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/config && test_must_fail git --git-dir=dst/.git fetch "file://$(pwd)" $refspec 2>err && - test_i18ngrep "Invalid SHA-1: \[core\]" err && + test_i18ngrep "invalid object name: \[core\]" err && git --git-dir=dst/.git config fetch.fsck.skipList dst/.git/SKIP && git --git-dir=dst/.git fetch "file://$(pwd)" $refspec diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh index d2a2cdd..dda81b7 100755 --- a/t/t5505-remote.sh +++ b/t/t5505-remote.sh @@ -734,15 +734,53 @@ test_expect_success 'reject adding remote with an invalid name' ' # the last two ones check if the config is updated. test_expect_success 'rename a remote' ' + test_config_global remote.pushDefault origin && git clone one four && ( cd four && + git config branch.master.pushRemote origin && git remote rename origin upstream && test -z "$(git for-each-ref refs/remotes/origin)" && test "$(git symbolic-ref refs/remotes/upstream/HEAD)" = "refs/remotes/upstream/master" && test "$(git rev-parse upstream/master)" = "$(git rev-parse master)" && test "$(git config remote.upstream.fetch)" = "+refs/heads/*:refs/remotes/upstream/*" && - test "$(git config branch.master.remote)" = "upstream" + test "$(git config branch.master.remote)" = "upstream" && + test "$(git config branch.master.pushRemote)" = "upstream" && + test "$(git config --global remote.pushDefault)" = "origin" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault' ' + git clone one four.1 && + ( + cd four.1 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --local remote.pushDefault)" = "upstream" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault but ignores global' ' + test_config_global remote.pushDefault other && + git clone one four.2 && + ( + cd four.2 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --global remote.pushDefault)" = "other" && + test "$(git config --local remote.pushDefault)" = "upstream" + ) +' + +test_expect_success 'rename a remote renames repo remote.pushDefault but keeps global' ' + test_config_global remote.pushDefault origin && + git clone one four.3 && + ( + cd four.3 && + git config remote.pushDefault origin && + git remote rename origin upstream && + test "$(git config --global remote.pushDefault)" = "origin" && + test "$(git config --local remote.pushDefault)" = "upstream" ) ' @@ -784,6 +822,54 @@ test_expect_success 'rename succeeds with existing remote.<target>.prune' ' git -C four.four remote rename origin upstream ' +test_expect_success 'remove a remote' ' + test_config_global remote.pushDefault origin && + git clone one four.five && + ( + cd four.five && + git config branch.master.pushRemote origin && + git remote remove origin && + test -z "$(git for-each-ref refs/remotes/origin)" && + test_must_fail git config branch.master.remote && + test_must_fail git config branch.master.pushRemote && + test "$(git config --global remote.pushDefault)" = "origin" + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault' ' + git clone one four.five.1 && + ( + cd four.five.1 && + git config remote.pushDefault origin && + git remote remove origin && + test_must_fail git config --local remote.pushDefault + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault but ignores global' ' + test_config_global remote.pushDefault other && + git clone one four.five.2 && + ( + cd four.five.2 && + git config remote.pushDefault origin && + git remote remove origin && + test "$(git config --global remote.pushDefault)" = "other" && + test_must_fail git config --local remote.pushDefault + ) +' + +test_expect_success 'remove a remote removes repo remote.pushDefault but keeps global' ' + test_config_global remote.pushDefault origin && + git clone one four.five.3 && + ( + cd four.five.3 && + git config remote.pushDefault origin && + git remote remove origin && + test "$(git config --global remote.pushDefault)" = "origin" && + test_must_fail git config --local remote.pushDefault + ) +' + cat >remotes_origin <<EOF URL: $(pwd)/one Push: refs/heads/master:refs/heads/upstream @@ -1222,4 +1308,59 @@ test_expect_success 'add remote matching the "insteadOf" URL' ' git remote add backup xyz@example.com ' +test_expect_success 'unqualified <dst> refspec DWIM and advice' ' + test_when_finished "(cd test && git tag -d some-tag)" && + ( + cd test && + git tag -a -m "Some tag" some-tag master && + exit_with=true && + for type in commit tag tree blob + do + if test "$type" = "blob" + then + oid=$(git rev-parse some-tag:file) + else + oid=$(git rev-parse some-tag^{$type}) + fi && + test_must_fail git push origin $oid:dst 2>err && + test_i18ngrep "error: The destination you" err && + test_i18ngrep "hint: Did you mean" err && + test_must_fail git -c advice.pushUnqualifiedRefName=false \ + push origin $oid:dst 2>err && + test_i18ngrep "error: The destination you" err && + test_i18ngrep ! "hint: Did you mean" err || + exit_with=false + done && + $exit_with + ) +' + +test_expect_success 'refs/remotes/* <src> refspec and unqualified <dst> DWIM and advice' ' + ( + cd two && + git tag -a -m "Some tag" my-tag master && + git update-ref refs/trees/my-head-tree HEAD^{tree} && + git update-ref refs/blobs/my-file-blob HEAD:file + ) && + ( + cd test && + git config --add remote.two.fetch "+refs/tags/*:refs/remotes/tags-from-two/*" && + git config --add remote.two.fetch "+refs/trees/*:refs/remotes/trees-from-two/*" && + git config --add remote.two.fetch "+refs/blobs/*:refs/remotes/blobs-from-two/*" && + git fetch --no-tags two && + + test_must_fail git push origin refs/remotes/two/another:dst 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/tags-from-two/my-tag:dst-tag 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/trees-from-two/my-head-tree:dst-tree 2>err && + test_i18ngrep "error: The destination you" err && + + test_must_fail git push origin refs/remotes/blobs-from-two/my-file-blob:dst-blob 2>err && + test_i18ngrep "error: The destination you" err + ) +' + test_done diff --git a/t/t5509-fetch-push-namespaces.sh b/t/t5509-fetch-push-namespaces.sh index c88df78..a67f792 100755 --- a/t/t5509-fetch-push-namespaces.sh +++ b/t/t5509-fetch-push-namespaces.sh @@ -20,7 +20,7 @@ test_expect_success setup ' ) && commit0=$(cd original && git rev-parse HEAD^) && commit1=$(cd original && git rev-parse HEAD) && - git init pushee && + git init --bare pushee && git init puller ' @@ -124,4 +124,43 @@ test_expect_success 'try to update a hidden full ref' ' test_must_fail git -C original push pushee-namespaced master ' +test_expect_success 'set up ambiguous HEAD' ' + git init ambiguous && + ( + cd ambiguous && + git commit --allow-empty -m foo && + git update-ref refs/namespaces/ns/refs/heads/one HEAD && + git update-ref refs/namespaces/ns/refs/heads/two HEAD && + git symbolic-ref refs/namespaces/ns/HEAD \ + refs/namespaces/ns/refs/heads/two + ) +' + +test_expect_success 'clone chooses correct HEAD (v0)' ' + GIT_NAMESPACE=ns git -c protocol.version=0 \ + clone ambiguous ambiguous-v0 && + echo refs/heads/two >expect && + git -C ambiguous-v0 symbolic-ref HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'clone chooses correct HEAD (v2)' ' + GIT_NAMESPACE=ns git -c protocol.version=2 \ + clone ambiguous ambiguous-v2 && + echo refs/heads/two >expect && + git -C ambiguous-v2 symbolic-ref HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'denyCurrentBranch and unborn branch with ref namespace' ' + ( + cd original && + git init unborn && + git remote add unborn-namespaced "ext::git --namespace=namespace %s unborn" && + test_must_fail git push unborn-namespaced HEAD:master && + git -C unborn config receive.denyCurrentBranch updateInstead && + git push unborn-namespaced HEAD:master + ) +' + test_done diff --git a/t/t5510-fetch.sh b/t/t5510-fetch.sh index 3b7b305..a66dbe0 100755 --- a/t/t5510-fetch.sh +++ b/t/t5510-fetch.sh @@ -11,7 +11,7 @@ D=$(pwd) test_bundle_object_count () { git verify-pack -v "$1" >verify.out && - test "$2" = $(grep '^[0-9a-f]\{40\} ' verify.out | wc -l) + test "$2" = $(grep "^$OID_REGEX " verify.out | wc -l) } convert_bundle_to_pack () { @@ -174,6 +174,30 @@ test_expect_success 'fetch --prune --tags with refspec prunes based on refspec' git rev-parse sometag ' +test_expect_success '--refmap="" ignores configured refspec' ' + cd "$TRASH_DIRECTORY" && + git clone "$D" remote-refs && + git -C remote-refs rev-parse remotes/origin/master >old && + git -C remote-refs update-ref refs/remotes/origin/master master~1 && + git -C remote-refs rev-parse remotes/origin/master >new && + git -C remote-refs fetch --refmap= origin "+refs/heads/*:refs/hidden/origin/*" && + git -C remote-refs rev-parse remotes/origin/master >actual && + test_cmp new actual && + git -C remote-refs fetch origin && + git -C remote-refs rev-parse remotes/origin/master >actual && + test_cmp old actual +' + +test_expect_success '--refmap="" and --prune' ' + git -C remote-refs update-ref refs/remotes/origin/foo/otherbranch master && + git -C remote-refs update-ref refs/hidden/foo/otherbranch master && + git -C remote-refs fetch --prune --refmap="" origin +refs/heads/*:refs/hidden/* && + git -C remote-refs rev-parse remotes/origin/foo/otherbranch && + test_must_fail git -C remote-refs rev-parse refs/hidden/foo/otherbranch && + git -C remote-refs fetch --prune origin && + test_must_fail git -C remote-refs rev-parse remotes/origin/foo/otherbranch +' + test_expect_success 'fetch tags when there is no tags' ' cd "$D" && @@ -261,9 +285,10 @@ test_expect_success 'create bundle 1' ' ' test_expect_success 'header of bundle looks right' ' + head -n 4 "$D"/bundle1 && head -n 1 "$D"/bundle1 | grep "^#" && - head -n 2 "$D"/bundle1 | grep "^-[0-9a-f]\{40\} " && - head -n 3 "$D"/bundle1 | grep "^[0-9a-f]\{40\} " && + head -n 2 "$D"/bundle1 | grep "^-$OID_REGEX " && + head -n 3 "$D"/bundle1 | grep "^$OID_REGEX " && head -n 4 "$D"/bundle1 | grep "^$" ' @@ -289,7 +314,7 @@ test_expect_success 'bundle 1 has only 3 files ' ' test_expect_success 'unbundle 2' ' cd "$D/bundle" && git fetch ../bundle2 master:master && - test "tip" = "$(git log -1 --pretty=oneline master | cut -b42-)" + test "tip" = "$(git log -1 --pretty=oneline master | cut -d" " -f2)" ' test_expect_success 'bundle does not prerequisite objects' ' @@ -354,7 +379,6 @@ test_expect_success 'fetch from GIT URL with a non-applying branch.<name>.merge # the strange name is: a\!'b test_expect_success 'quoting of a strangely named repo' ' test_must_fail git fetch "a\\!'\''b" > result 2>&1 && - cat result && grep "fatal: '\''a\\\\!'\''b'\''" result ' @@ -570,6 +594,35 @@ test_expect_success 'LHS of refspec follows ref disambiguation rules' ' ) ' +test_expect_success 'fetch.writeCommitGraph' ' + git clone three write && + ( + cd three && + test_commit new + ) && + ( + cd write && + git -c fetch.writeCommitGraph fetch origin && + test_path_is_file .git/objects/info/commit-graphs/commit-graph-chain + ) +' + +test_expect_success 'fetch.writeCommitGraph with submodules' ' + git clone dups super && + ( + cd super && + git submodule add "file://$TRASH_DIRECTORY/three" && + git commit -m "add submodule" + ) && + git clone "super" super-clone && + ( + cd super-clone && + rm -rf .git/objects/info && + git -c fetch.writeCommitGraph=true fetch origin && + test_path_is_file .git/objects/info/commit-graphs/commit-graph-chain + ) +' + # configured prune tests set_config_tristate () { @@ -902,6 +955,29 @@ test_expect_success C_LOCALE_OUTPUT 'fetch compact output' ' test_cmp expect actual ' +test_expect_success '--no-show-forced-updates' ' + mkdir forced-updates && + ( + cd forced-updates && + git init && + test_commit 1 && + test_commit 2 + ) && + git clone forced-updates forced-update-clone && + git clone forced-updates no-forced-update-clone && + git -C forced-updates reset --hard HEAD~1 && + ( + cd forced-update-clone && + git fetch --show-forced-updates origin 2>output && + test_i18ngrep "(forced update)" output + ) && + ( + cd no-forced-update-clone && + git fetch --no-show-forced-updates origin 2>output && + test_i18ngrep ! "(forced update)" output + ) +' + setup_negotiation_tip () { SERVER="$1" URL="$2" @@ -978,6 +1054,7 @@ test_expect_success '--negotiation-tip limits "have" lines sent with HTTP protoc check_negotiation_tip ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5512-ls-remote.sh b/t/t5512-ls-remote.sh index 32e722d..04b3540 100755 --- a/t/t5512-ls-remote.sh +++ b/t/t5512-ls-remote.sh @@ -204,6 +204,12 @@ test_expect_success 'overrides work between mixed transfer/upload-pack hideRefs' grep refs/tags/magic actual ' +test_expect_success 'protocol v2 supports hiderefs' ' + test_config uploadpack.hiderefs refs/tags && + git -c protocol.version=2 ls-remote . >actual && + ! grep refs/tags actual +' + test_expect_success 'ls-remote --symref' ' git fetch origin && cat >expect <<-EOF && @@ -217,50 +223,58 @@ test_expect_success 'ls-remote --symref' ' $(git rev-parse refs/tags/mark1.10) refs/tags/mark1.10 $(git rev-parse refs/tags/mark1.2) refs/tags/mark1.2 EOF - git ls-remote --symref >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref >actual && test_cmp expect actual ' test_expect_success 'ls-remote with filtered symref (refname)' ' - cat >expect <<-\EOF && + rev=$(git rev-parse HEAD) && + cat >expect <<-EOF && ref: refs/heads/master HEAD - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a HEAD + $rev HEAD EOF - git ls-remote --symref . HEAD >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref . HEAD >actual && test_cmp expect actual ' test_expect_failure 'ls-remote with filtered symref (--heads)' ' git symbolic-ref refs/heads/foo refs/tags/mark && - cat >expect <<-\EOF && + cat >expect <<-EOF && ref: refs/tags/mark refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + $rev refs/heads/foo + $rev refs/heads/master EOF - git ls-remote --symref --heads . >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref --heads . >actual && test_cmp expect actual ' test_expect_success 'ls-remote --symref omits filtered-out matches' ' - cat >expect <<-\EOF && - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/foo - 1bd44cb9d13204b0fe1958db0082f5028a16eb3a refs/heads/master + cat >expect <<-EOF && + $rev refs/heads/foo + $rev refs/heads/master EOF - git ls-remote --symref --heads . >actual && + # Protocol v2 supports sending symrefs for refs other than HEAD, so use + # protocol v0 here. + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref --heads . >actual && test_cmp expect actual && - git ls-remote --symref . "refs/heads/*" >actual && + GIT_TEST_PROTOCOL_VERSION=0 git ls-remote --symref . "refs/heads/*" >actual && test_cmp expect actual ' test_lazy_prereq GIT_DAEMON ' - test_tristate GIT_TEST_GIT_DAEMON && - test "$GIT_TEST_GIT_DAEMON" != false + test_bool_env GIT_TEST_GIT_DAEMON true ' # This test spawns a daemon, so run it only if the user would be OK with # testing with git-daemon. test_expect_success PIPE,JGIT,GIT_DAEMON 'indicate no refs in standards-compliant empty remote' ' - JGIT_DAEMON_PORT=${JGIT_DAEMON_PORT-${this_test#t}} && + test_set_port JGIT_DAEMON_PORT && JGIT_DAEMON_PID= && git init --bare empty.git && >empty.git/git-daemon-export-ok && diff --git a/t/t5514-fetch-multiple.sh b/t/t5514-fetch-multiple.sh index 0030c92..de8e2f1 100755 --- a/t/t5514-fetch-multiple.sh +++ b/t/t5514-fetch-multiple.sh @@ -105,9 +105,12 @@ test_expect_success 'git fetch --multiple (two remotes)' ' git remote rm origin && git remote add one ../one && git remote add two ../two && - git fetch --multiple one two && + GIT_TRACE=1 git fetch --multiple one two 2>trace && git branch -r > output && - test_cmp ../expect output) + test_cmp ../expect output && + grep "built-in: git gc" trace >gc && + test_line_count = 1 gc + ) ' test_expect_success 'git fetch --multiple (bad remote names)' ' @@ -180,4 +183,15 @@ test_expect_success 'git fetch --all --tags' ' test_cmp expect test8/output ' +test_expect_success 'parallel' ' + git remote add one ./bogus1 && + git remote add two ./bogus2 && + + test_must_fail env GIT_TRACE="$PWD/trace" \ + git fetch --jobs=2 --multiple one two 2>err && + grep "preparing to run up to 2 tasks" trace && + test_i18ngrep "could not fetch .one.*128" err && + test_i18ngrep "could not fetch .two.*128" err +' + test_done diff --git a/t/t5515-fetch-merge-logic.sh b/t/t5515-fetch-merge-logic.sh index 36b0dbc..9d6a46f 100755 --- a/t/t5515-fetch-merge-logic.sh +++ b/t/t5515-fetch-merge-logic.sh @@ -6,16 +6,62 @@ test_description='Merge logic in fetch' +# NEEDSWORK: If the overspecification of the expected result is reduced, we +# might be able to run this test in all protocol versions. +GIT_TEST_PROTOCOL_VERSION=0 +export GIT_TEST_PROTOCOL_VERSION + . ./test-lib.sh -LF=' -' +build_script () { + script="$1" && + for i in one three_file master master2 one_tree three two two2 three2 + do + echo "s/$(test_oid --hash=sha1 "$i")/$(test_oid "$i")/g" >>"$script" + done +} + +convert_expected () { + file="$1" && + script="$2" && + sed -f "$script" "$file" >"$file.tmp" && + mv "$file.tmp" "$file" +} test_expect_success setup ' GIT_AUTHOR_DATE="2006-06-26 00:00:00 +0000" && GIT_COMMITTER_DATE="2006-06-26 00:00:00 +0000" && export GIT_AUTHOR_DATE GIT_COMMITTER_DATE && + test_oid_cache <<-EOF && + one sha1:8e32a6d901327a23ef831511badce7bf3bf46689 + one sha256:8739546433ab1ac72ee93088dce611210effee072b2b586ceac6dde43ebec9ce + + three_file sha1:0e3b14047d3ee365f4f2a1b673db059c3972589c + three_file sha256:bc4447d50c07497a8bfe6eef817f2364ecca9d471452e43b52756cc1a908bd32 + + master sha1:6c9dec2b923228c9ff994c6cfe4ae16c12408dc5 + master sha256:8521c3072461fcfe8f32d67f95cc6e6b832a2db2fa29769ffc788bce85ebcd75 + + one_tree sha1:22feea448b023a2d864ef94b013735af34d238ba + one_tree sha256:6e4743f4ef2356b881dda5e91f5c7cdffe870faf350bf7b312f80a20935f5d83 + + three sha1:c61a82b60967180544e3c19f819ddbd0c9f89899 + three sha256:0cc6d1eda617ded715170786e31ba4e2d0185404ec5a3508dd0d73b324860c6a + + two sha1:525b7fb068d59950d185a8779dc957c77eed73ba + two sha256:3b21de3440cd38c2a9e9b464adb923f7054949ed4c918e1a0ac4c95cd52774db + + master2 sha1:754b754407bf032e9a2f9d5a9ad05ca79a6b228f + master2 sha256:6c7abaea8a6d8ef4d89877e68462758dc6774690fbbbb0e6d7dd57415c9abde0 + + two2 sha1:6134ee8f857693b96ff1cc98d3e2fd62b199e5a8 + two2 sha256:87a2d3ee29c83a3dc7afd41c0606b11f67603120b910a7be7840accdc18344d4 + + three2 sha1:0567da4d5edd2ff4bb292a465ba9e64dcad9536b + three2 sha256:cceb3e8eca364fa9a0a39a1efbebecacc664af86cbbd8070571f5faeb5f0e8c3 + EOF + echo >file original && git add file && git commit -a -m One && @@ -85,7 +131,8 @@ test_expect_success setup ' git config branch.br-$remote-octopus.remote $remote && git config branch.br-$remote-octopus.merge refs/heads/one && git config --add branch.br-$remote-octopus.merge two - done + done && + build_script sed_script ' # Merge logic depends on branch properties and Pull: or .fetch lines @@ -136,6 +183,10 @@ do actual_r="$pfx-refs.$test" test_expect_success "$cmd" ' + cp "$expect_f" expect_f && + convert_expected expect_f sed_script && + cp "$expect_r" expect_r && + convert_expected expect_r sed_script && { echo "# $cmd" set x $cmd; shift @@ -151,18 +202,18 @@ do cat .git/FETCH_HEAD } >"$actual_f" && git show-ref >"$actual_r" && - if test -f "$expect_f" + if test -f "expect_f" then - test_cmp "$expect_f" "$actual_f" && + test_cmp "expect_f" "$actual_f" && rm -f "$actual_f" else # this is to help developing new tests. cp "$actual_f" "$expect_f" false fi && - if test -f "$expect_r" + if test -f "expect_r" then - test_cmp "$expect_r" "$actual_r" && + test_cmp "expect_r" "$actual_r" && rm -f "$actual_r" else # this is to help developing new tests. diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 37e8e80..9ff041a 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -1147,8 +1147,12 @@ test_expect_success 'fetch exact SHA1' ' git prune && test_must_fail git cat-file -t $the_commit && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + # fetching the hidden object should fail by default - test_must_fail git fetch -v ../testrepo $the_commit:refs/heads/copy 2>err && + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch -v ../testrepo $the_commit:refs/heads/copy 2>err && test_i18ngrep "Server does not allow request for unadvertised object" err && test_must_fail git rev-parse --verify refs/heads/copy && @@ -1204,7 +1208,10 @@ do mk_empty shallow && ( cd shallow && - test_must_fail git fetch --depth=1 ../testrepo/.git $SHA1 && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch --depth=1 ../testrepo/.git $SHA1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch --depth=1 ../testrepo/.git $SHA1 && git cat-file commit $SHA1 @@ -1232,15 +1239,21 @@ do mk_empty shallow && ( cd shallow && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_1 && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch ../testrepo/.git $SHA1_3 && + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch ../testrepo/.git $SHA1_1 && git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && git fetch ../testrepo/.git $SHA1_1 && git cat-file commit $SHA1_1 && test_must_fail git cat-file commit $SHA1_2 && git fetch ../testrepo/.git $SHA1_2 && git cat-file commit $SHA1_2 && - test_must_fail ok=sigpipe git fetch ../testrepo/.git $SHA1_3 + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch ../testrepo/.git $SHA1_3 2>err && + test_i18ngrep "remote error:.*not our ref.*$SHA1_3\$" err ) ' done @@ -1272,6 +1285,17 @@ test_expect_success 'fetch follows tags by default' ' test_cmp expect actual ' +test_expect_success 'peeled advertisements are not considered ref tips' ' + mk_empty testrepo && + git -C testrepo commit --allow-empty -m one && + git -C testrepo commit --allow-empty -m two && + git -C testrepo tag -m foo mytag HEAD^ && + oid=$(git -C testrepo rev-parse mytag^{commit}) && + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch testrepo $oid 2>err && + test_i18ngrep "Server does not allow request for unadvertised object" err +' + test_expect_success 'pushing a specific ref applies remote.$name.push as refmap' ' mk_test testrepo heads/master && rm -fr src dst && @@ -1370,7 +1394,7 @@ test_expect_success 'push does not follow tags by default' ' test_cmp expect actual ' -test_expect_success 'push --follow-tag only pushes relevant tags' ' +test_expect_success 'push --follow-tags only pushes relevant tags' ' mk_test testrepo heads/master && rm -fr src dst && git init src && @@ -1384,7 +1408,7 @@ test_expect_success 'push --follow-tag only pushes relevant tags' ' git tag -m "future" future && git checkout master && git for-each-ref refs/heads/master refs/tags/tag >../expect && - git push --follow-tag ../dst master + git push --follow-tags ../dst master ) && ( cd dst && @@ -1688,4 +1712,15 @@ test_expect_success 'updateInstead with push-to-checkout hook' ' ) ' +test_expect_success 'denyCurrentBranch and worktrees' ' + git worktree add new-wt && + git clone . cloned && + test_commit -C cloned first && + test_config receive.denyCurrentBranch refuse && + test_must_fail git -C cloned push origin HEAD:new-wt && + test_config receive.denyCurrentBranch updateInstead && + git -C cloned push origin HEAD:new-wt && + test_must_fail git -C cloned push --delete origin new-wt +' + test_done diff --git a/t/t5517-push-mirror.sh b/t/t5517-push-mirror.sh index c05a661..e4edd56 100755 --- a/t/t5517-push-mirror.sh +++ b/t/t5517-push-mirror.sh @@ -265,4 +265,14 @@ test_expect_success 'remote.foo.mirror=no has no effect' ' ' +test_expect_success 'push to mirrored repository with refspec fails' ' + mk_repo_pair && + ( + cd master && + echo one >foo && git add foo && git commit -m one && + git config --add remote.up.mirror true && + test_must_fail git push up master + ) +' + test_done diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index cf4cc32..2f86fca 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -5,7 +5,7 @@ test_description='pulling into void' . ./test-lib.sh modify () { - sed -e "$1" <"$2" >"$2.x" && + sed -e "$1" "$2" >"$2.x" && mv "$2.x" "$2" } @@ -15,8 +15,10 @@ test_pull_autostash () { git add new_file && git pull "$@" . copy && test_cmp_rev HEAD^ copy && - test "$(cat new_file)" = dirty && - test "$(cat file)" = "modified again" + echo dirty >expect && + test_cmp expect new_file && + echo "modified again" >expect && + test_cmp expect file } test_pull_autostash_fail () { @@ -39,8 +41,8 @@ test_expect_success 'pulling into void' ' cd cloned && git pull .. ) && - test -f file && - test -f cloned/file && + test_path_is_file file && + test_path_is_file cloned/file && test_cmp file cloned/file ' @@ -50,8 +52,8 @@ test_expect_success 'pulling into void using master:master' ' cd cloned-uho && git pull .. master:master ) && - test -f file && - test -f cloned-uho/file && + test_path_is_file file && + test_path_is_file cloned-uho/file && test_cmp file cloned-uho/file ' @@ -99,7 +101,7 @@ test_expect_success 'pulling into void must not create an octopus' ' ( cd cloned-octopus && test_must_fail git pull .. master master && - ! test -f file + test_path_is_missing file ) ' @@ -110,9 +112,11 @@ test_expect_success 'test . as a remote' ' echo updated >file && git commit -a -m updated && git checkout copy && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull && - test "$(cat file)" = updated && + echo updated >expect && + test_cmp expect file && git reflog -1 >reflog.actual && sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && echo "OBJID HEAD@{0}: pull: Fast-forward" >reflog.expected && @@ -125,9 +129,11 @@ test_expect_success 'the default remote . should not break explicit pull' ' git commit -a -m modified && git checkout copy && git reset --hard HEAD^ && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull . second && - test "$(cat file)" = modified && + echo modified >expect && + test_cmp expect file && git reflog -1 >reflog.actual && sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && echo "OBJID HEAD@{0}: pull . second: Fast-forward" >reflog.expected && @@ -137,10 +143,11 @@ test_expect_success 'the default remote . should not break explicit pull' ' test_expect_success 'fail if wildcard spec does not match any refs' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull . "refs/nonexisting1/*:refs/nonexisting2/*" 2>err && test_i18ngrep "no candidates for merging" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if no branches specified with non-default remote' ' @@ -148,11 +155,12 @@ test_expect_success 'fail if no branches specified with non-default remote' ' test_when_finished "git remote remove test_remote" && git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_config branch.test.remote origin && test_must_fail git pull test_remote 2>err && test_i18ngrep "specify a branch on the command line" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if not on a branch' ' @@ -160,10 +168,11 @@ test_expect_success 'fail if not on a branch' ' test_when_finished "git remote remove origin" && git checkout HEAD^ && test_when_finished "git checkout -f copy" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "not currently on a branch" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if no configuration for current branch' ' @@ -172,10 +181,11 @@ test_expect_success 'fail if no configuration for current branch' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote test_remote && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "no tracking information" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'pull --all: fail if no configuration for current branch' ' @@ -184,10 +194,11 @@ test_expect_success 'pull --all: fail if no configuration for current branch' ' git checkout -b test copy^ && test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote test_remote && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull --all 2>err && test_i18ngrep "There is no tracking information" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if upstream branch does not exist' ' @@ -195,26 +206,31 @@ test_expect_success 'fail if upstream branch does not exist' ' test_when_finished "git checkout -f copy && git branch -D test" && test_config branch.test.remote . && test_config branch.test.merge refs/heads/nonexisting && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_must_fail git pull 2>err && test_i18ngrep "no such ref was fetched" err && - test "$(cat file)" = file + test_cmp expect file ' test_expect_success 'fail if the index has unresolved entries' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && test_commit modified2 file && - test -z "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_must_be_empty unmerged && test_must_fail git pull . second && - test -n "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_file_not_empty unmerged && cp file expected && test_must_fail git pull . second 2>err && test_i18ngrep "Pulling is not possible because you have unmerged files." err && test_cmp expected file && git add file && - test -z "$(git ls-files -u)" && + git ls-files -u >unmerged && + test_must_be_empty unmerged && test_must_fail git pull . second 2>err && test_i18ngrep "You have not concluded your merge" err && test_cmp expected file @@ -223,47 +239,66 @@ test_expect_success 'fail if the index has unresolved entries' ' test_expect_success 'fast-forwards working tree if branch head is updated' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && git pull . second:third 2>err && test_i18ngrep "fetch updated the current branch head" err && - test "$(cat file)" = modified && - test "$(git rev-parse third)" = "$(git rev-parse second)" + echo modified >expect && + test_cmp expect file && + test_cmp_rev third second ' test_expect_success 'fast-forward fails with conflicting work tree' ' git checkout -b third second^ && test_when_finished "git checkout -f copy && git branch -D third" && - test "$(cat file)" = file && + echo file >expect && + test_cmp expect file && echo conflict >file && test_must_fail git pull . second:third 2>err && test_i18ngrep "Cannot fast-forward your working tree" err && - test "$(cat file)" = conflict && - test "$(git rev-parse third)" = "$(git rev-parse second)" + echo conflict >expect && + test_cmp expect file && + test_cmp_rev third second ' test_expect_success '--rebase' ' git branch to-rebase && - echo modified again > file && + echo modified again >file && git commit -m file file && git checkout to-rebase && - echo new > file2 && + echo new >file2 && git add file2 && git commit -m "new file" && git tag before-rebase && git pull --rebase . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' -test_expect_success '--rebase fast forward' ' +test_expect_success '--rebase (merge) fast forward' ' git reset --hard before-rebase && git checkout -b ff && echo another modification >file && git commit -m third file && git checkout to-rebase && - git pull --rebase . ff && - test "$(git rev-parse HEAD)" = "$(git rev-parse ff)" && + git -c rebase.backend=merge pull --rebase . ff && + test_cmp_rev HEAD ff && + + # The above only validates the result. Did we actually bypass rebase? + git reflog -1 >reflog.actual && + sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy && + echo "OBJID HEAD@{0}: pull --rebase . ff: Fast-forward" >reflog.expected && + test_cmp reflog.expected reflog.fuzzy +' + +test_expect_success '--rebase (am) fast forward' ' + git reset --hard before-rebase && + + git -c rebase.backend=apply pull --rebase . ff && + test_cmp_rev HEAD ff && # The above only validates the result. Did we actually bypass rebase? git reflog -1 >reflog.actual && @@ -287,7 +322,7 @@ test_expect_success '--rebase --autostash fast forward' ' git checkout behind && echo dirty >file && git pull --rebase --autostash . to-rebase-ff && - test "$(git rev-parse HEAD)" = "$(git rev-parse to-rebase-ff)" + test_cmp_rev HEAD to-rebase-ff ' test_expect_success '--rebase with conflicts shows advice' ' @@ -305,7 +340,7 @@ test_expect_success '--rebase with conflicts shows advice' ' test_tick && git commit -m "Create conflict" seq.txt && test_must_fail git pull --rebase . seq 2>err >out && - test_i18ngrep "Resolve all conflicts manually" out + test_i18ngrep "Resolve all conflicts manually" err ' test_expect_success 'failed --rebase shows advice' ' @@ -319,15 +354,17 @@ test_expect_success 'failed --rebase shows advice' ' git checkout -f -b fails-to-rebase HEAD^ && test_commit v2-without-cr file "2" file2-lf && test_must_fail git pull --rebase . diverging 2>err >out && - test_i18ngrep "Resolve all conflicts manually" out + test_i18ngrep "Resolve all conflicts manually" err ' test_expect_success '--rebase fails with multiple branches' ' git reset --hard before-rebase && test_must_fail git pull --rebase . copy master 2>err && - test "$(git rev-parse HEAD)" = "$(git rev-parse before-rebase)" && + test_cmp_rev HEAD before-rebase && test_i18ngrep "Cannot rebase onto multiple branches" err && - test modified = "$(git show HEAD:file)" + echo modified >expect && + git show HEAD:file >actual && + test_cmp expect actual ' test_expect_success 'pull --rebase succeeds with dirty working directory and rebase.autostash set' ' @@ -377,8 +414,10 @@ test_expect_success 'pull.rebase' ' git reset --hard before-rebase && test_config pull.rebase true && git pull . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' test_expect_success 'pull --autostash & pull.rebase=true' ' @@ -395,8 +434,10 @@ test_expect_success 'branch.to-rebase.rebase' ' git reset --hard before-rebase && test_config branch.to-rebase.rebase true && git pull . copy && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' test_expect_success 'branch.to-rebase.rebase should override pull.rebase' ' @@ -404,23 +445,29 @@ test_expect_success 'branch.to-rebase.rebase should override pull.rebase' ' test_config pull.rebase true && test_config branch.to-rebase.rebase false && git pull . copy && - test "$(git rev-parse HEAD^)" != "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" + test_cmp_rev ! HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual ' -test_expect_success "pull --rebase warns on --verify-signatures" ' +test_expect_success 'pull --rebase warns on --verify-signatures' ' git reset --hard before-rebase && git pull --rebase --verify-signatures . copy 2>err && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" && + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual && test_i18ngrep "ignoring --verify-signatures for rebase" err ' -test_expect_success "pull --rebase does not warn on --no-verify-signatures" ' +test_expect_success 'pull --rebase does not warn on --no-verify-signatures' ' git reset --hard before-rebase && git pull --rebase --no-verify-signatures . copy 2>err && - test "$(git rev-parse HEAD^)" = "$(git rev-parse copy)" && - test new = "$(git show HEAD:file2)" && + test_cmp_rev HEAD^ copy && + echo new >expect && + git show HEAD:file2 >actual && + test_cmp expect actual && test_i18ngrep ! "verify-signatures" err ' @@ -440,25 +487,31 @@ test_expect_success 'pull.rebase=false create a new merge commit' ' git reset --hard before-preserve-rebase && test_config pull.rebase false && git pull . copy && - test "$(git rev-parse HEAD^1)" = "$(git rev-parse before-preserve-rebase)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^1 before-preserve-rebase && + test_cmp_rev HEAD^2 copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success 'pull.rebase=true flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success 'pull.rebase=1 is treated as true and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase 1 && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success REBASE_P \ @@ -466,8 +519,8 @@ test_expect_success REBASE_P \ git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse keep-merge)" + test_cmp_rev HEAD^^ copy && + test_cmp_rev HEAD^2 keep-merge ' test_expect_success 'pull.rebase=interactive' ' @@ -478,7 +531,8 @@ test_expect_success 'pull.rebase=interactive' ' test_set_editor "$TRASH_DIRECTORY/fake-editor" && test_when_finished "test_might_fail git rebase --abort" && test_must_fail git pull --rebase=interactive . copy && - test "I was here" = "$(cat fake.out)" + echo "I was here" >expect && + test_cmp expect fake.out ' test_expect_success 'pull --rebase=i' ' @@ -489,30 +543,35 @@ test_expect_success 'pull --rebase=i' ' test_set_editor "$TRASH_DIRECTORY/fake-editor" && test_when_finished "test_might_fail git rebase --abort" && test_must_fail git pull --rebase=i . copy && - test "I was here, too" = "$(cat fake.out)" + echo "I was here, too" >expect && + test_cmp expect fake.out ' test_expect_success 'pull.rebase=invalid fails' ' git reset --hard before-preserve-rebase && test_config pull.rebase invalid && - ! git pull . copy + test_must_fail git pull . copy ' test_expect_success '--rebase=false create a new merge commit' ' git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=false . copy && - test "$(git rev-parse HEAD^1)" = "$(git rev-parse before-preserve-rebase)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^1 before-preserve-rebase && + test_cmp_rev HEAD^2 copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success '--rebase=true rebases and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull --rebase=true . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success REBASE_P \ @@ -520,58 +579,62 @@ test_expect_success REBASE_P \ git reset --hard before-preserve-rebase && test_config pull.rebase true && git pull --rebase=preserve . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test "$(git rev-parse HEAD^2)" = "$(git rev-parse keep-merge)" + test_cmp_rev HEAD^^ copy && + test_cmp_rev HEAD^2 keep-merge ' test_expect_success '--rebase=invalid fails' ' git reset --hard before-preserve-rebase && - ! git pull --rebase=invalid . copy + test_must_fail git pull --rebase=invalid . copy ' test_expect_success '--rebase overrides pull.rebase=preserve and flattens keep-merge' ' git reset --hard before-preserve-rebase && test_config pull.rebase preserve && git pull --rebase . copy && - test "$(git rev-parse HEAD^^)" = "$(git rev-parse copy)" && - test file3 = "$(git show HEAD:file3.t)" + test_cmp_rev HEAD^^ copy && + echo file3 >expect && + git show HEAD:file3.t >actual && + test_cmp expect actual ' test_expect_success '--rebase with rebased upstream' ' - git remote add -f me . && git checkout copy && git tag copy-orig && git reset --hard HEAD^ && - echo conflicting modification > file && + echo conflicting modification >file && git commit -m conflict file && git checkout to-rebase && - echo file > file2 && + echo file >file2 && git commit -m to-rebase file2 && git tag to-rebase-orig && git pull --rebase me copy && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" - + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success '--rebase -f with rebased upstream' ' test_when_finished "test_might_fail git rebase --abort" && git reset --hard to-rebase-orig && git pull --rebase -f me copy && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success '--rebase with rebased default upstream' ' - git update-ref refs/remotes/me/copy copy-orig && git checkout --track -b to-rebase2 me/copy && git reset --hard to-rebase-orig && git pull --rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" - + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success 'rebased upstream + fetch + pull --rebase' ' @@ -582,13 +645,14 @@ test_expect_success 'rebased upstream + fetch + pull --rebase' ' git reset --hard to-rebase-orig && git fetch && git pull --rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_expect_success 'pull --rebase dies early with dirty working directory' ' - git checkout to-rebase && git update-ref refs/remotes/me/copy copy^ && COPY="$(git rev-parse --verify me/copy)" && @@ -596,23 +660,23 @@ test_expect_success 'pull --rebase dies early with dirty working directory' ' test_config branch.to-rebase.remote me && test_config branch.to-rebase.merge refs/heads/copy && test_config branch.to-rebase.rebase true && - echo dirty >> file && + echo dirty >>file && git add file && test_must_fail git pull && - test "$COPY" = "$(git rev-parse --verify me/copy)" && + test_cmp_rev "$COPY" me/copy && git checkout HEAD -- file && git pull && - test "$COPY" != "$(git rev-parse --verify me/copy)" - + test_cmp_rev ! "$COPY" me/copy ' test_expect_success 'pull --rebase works on branch yet to be born' ' git rev-parse master >expect && mkdir empty_repo && - (cd empty_repo && - git init && - git pull --rebase .. master && - git rev-parse HEAD >../actual + ( + cd empty_repo && + git init && + git pull --rebase .. master && + git rev-parse HEAD >../actual ) && test_cmp expect actual ' @@ -624,10 +688,14 @@ test_expect_success 'pull --rebase fails on unborn branch with staged changes' ' cd empty_repo2 && echo staged-file >staged-file && git add staged-file && - test "$(git ls-files)" = staged-file && + echo staged-file >expect && + git ls-files >actual && + test_cmp expect actual && test_must_fail git pull --rebase .. master 2>err && - test "$(git ls-files)" = staged-file && - test "$(git show :staged-file)" = staged-file && + git ls-files >actual && + test_cmp expect actual && + git show :staged-file >actual && + test_cmp expect actual && test_i18ngrep "unborn branch with changes added to the index" err ) ' @@ -638,7 +706,8 @@ test_expect_success 'pull --rebase fails on corrupt HEAD' ' ( cd corrupt && test_commit one && - obj=$(git rev-parse --verify HEAD | sed "s#^..#&/#") && + git rev-parse --verify HEAD >head && + obj=$(sed "s#^..#&/#" head) && rm -f .git/objects/$obj && test_must_fail git pull --rebase ) @@ -646,66 +715,79 @@ test_expect_success 'pull --rebase fails on corrupt HEAD' ' test_expect_success 'setup for detecting upstreamed changes' ' mkdir src && - (cd src && - git init && - printf "1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n" > stuff && - git add stuff && - git commit -m "Initial revision" + ( + cd src && + git init && + printf "1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n" > stuff && + git add stuff && + git commit -m "Initial revision" ) && git clone src dst && - (cd src && - modify s/5/43/ stuff && - git commit -a -m "5->43" && - modify s/6/42/ stuff && - git commit -a -m "Make it bigger" + ( + cd src && + modify s/5/43/ stuff && + git commit -a -m "5->43" && + modify s/6/42/ stuff && + git commit -a -m "Make it bigger" ) && - (cd dst && - modify s/5/43/ stuff && - git commit -a -m "Independent discovery of 5->43" + ( + cd dst && + modify s/5/43/ stuff && + git commit -a -m "Independent discovery of 5->43" ) ' test_expect_success 'git pull --rebase detects upstreamed changes' ' - (cd dst && - git pull --rebase && - test -z "$(git ls-files -u)" + ( + cd dst && + git pull --rebase && + git ls-files -u >untracked && + test_must_be_empty untracked ) ' test_expect_success 'setup for avoiding reapplying old patches' ' - (cd dst && - test_might_fail git rebase --abort && - git reset --hard origin/master + ( + cd dst && + test_might_fail git rebase --abort && + git reset --hard origin/master ) && git clone --bare src src-replace.git && rm -rf src && mv src-replace.git src && - (cd dst && - modify s/2/22/ stuff && - git commit -a -m "Change 2" && - modify s/3/33/ stuff && - git commit -a -m "Change 3" && - modify s/4/44/ stuff && - git commit -a -m "Change 4" && - git push && - - modify s/44/55/ stuff && - git commit --amend -a -m "Modified Change 4" + ( + cd dst && + modify s/2/22/ stuff && + git commit -a -m "Change 2" && + modify s/3/33/ stuff && + git commit -a -m "Change 3" && + modify s/4/44/ stuff && + git commit -a -m "Change 4" && + git push && + + modify s/44/55/ stuff && + git commit --amend -a -m "Modified Change 4" ) ' test_expect_success 'git pull --rebase does not reapply old patches' ' - (cd dst && - test_must_fail git pull --rebase && - test 1 = $(find .git/rebase-apply -name "000*" | wc -l) + ( + cd dst && + test_must_fail git pull --rebase && + cat .git/rebase-merge/done .git/rebase-merge/git-rebase-todo >work && + grep -v -e \# -e ^$ work >patches && + test_line_count = 1 patches && + rm -f work ) ' test_expect_success 'git pull --rebase against local branch' ' git checkout -b copy2 to-rebase-orig && git pull --rebase . to-rebase && - test "conflicting modification" = "$(cat file)" && - test file = "$(cat file2)" + echo "conflicting modification" >expect && + test_cmp expect file && + echo file >expect && + test_cmp expect file2 ' test_done diff --git a/t/t5521-pull-options.sh b/t/t5521-pull-options.sh index c19d8db..ccde8ba 100755 --- a/t/t5521-pull-options.sh +++ b/t/t5521-pull-options.sh @@ -77,6 +77,14 @@ test_expect_success 'git pull -q -v' ' test_must_be_empty out && test -s err) ' +test_expect_success 'git pull --cleanup errors early on invalid argument' ' + mkdir clonedcleanup && + (cd clonedcleanup && git init && + test_must_fail git pull --cleanup invalid "../parent" >out 2>err && + test_must_be_empty out && + test -s err) +' + test_expect_success 'git pull --force' ' mkdir clonedoldstyle && diff --git a/t/t5526-fetch-submodules.sh b/t/t5526-fetch-submodules.sh index 6c2f9b2..63205df 100755 --- a/t/t5526-fetch-submodules.sh +++ b/t/t5526-fetch-submodules.sh @@ -524,6 +524,8 @@ test_expect_success 'fetching submodules respects parallel settings' ' git config fetch.recurseSubmodules true && ( cd downstream && + GIT_TRACE=$(pwd)/trace.out git fetch && + grep "1 tasks" trace.out && GIT_TRACE=$(pwd)/trace.out git fetch --jobs 7 && grep "7 tasks" trace.out && git config submodule.fetchJobs 8 && @@ -600,4 +602,121 @@ test_expect_success "fetch new commits when submodule got renamed" ' test_cmp expect actual ' +test_expect_success "fetch new submodule commits on-demand outside standard refspec" ' + # add a second submodule and ensure it is around in downstream first + git clone submodule sub1 && + git submodule add ./sub1 && + git commit -m "adding a second submodule" && + git -C downstream pull && + git -C downstream submodule update --init --recursive && + + git checkout --detach && + + C=$(git -C submodule commit-tree -m "new change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/1 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "new change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/2 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/3 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/3:refs/heads/my_branch && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commit on-demand in FETCH_HEAD' ' + # depends on the previous test for setup + + C=$(git -C submodule commit-tree -m "another change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/4 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "another change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/5 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/6 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/6 && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commits on-demand without .gitmodules entry' ' + # depends on the previous test for setup + + git config -f .gitmodules --remove-section submodule.sub1 && + git add .gitmodules && + git commit -m "delete gitmodules file" && + git checkout -B master && + git -C downstream fetch && + git -C downstream checkout origin/master && + + C=$(git -C submodule commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) && + git -C submodule update-ref refs/changes/7 $C && + git update-index --cacheinfo 160000 $C submodule && + test_tick && + + D=$(git -C sub1 commit-tree -m "yet another change outside refs/heads" HEAD^{tree}) && + git -C sub1 update-ref refs/changes/8 $D && + git update-index --cacheinfo 160000 $D sub1 && + + git commit -m "updated submodules outside of refs/heads" && + E=$(git rev-parse HEAD) && + git update-ref refs/changes/9 $E && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/9 && + git -C submodule cat-file -t $C && + git -C sub1 cat-file -t $D && + git checkout --recurse-submodules FETCH_HEAD + ) +' + +test_expect_success 'fetch new submodule commit intermittently referenced by superproject' ' + # depends on the previous test for setup + + D=$(git -C sub1 commit-tree -m "change 10 outside refs/heads" HEAD^{tree}) && + E=$(git -C sub1 commit-tree -m "change 11 outside refs/heads" HEAD^{tree}) && + F=$(git -C sub1 commit-tree -m "change 12 outside refs/heads" HEAD^{tree}) && + + git -C sub1 update-ref refs/changes/10 $D && + git update-index --cacheinfo 160000 $D sub1 && + git commit -m "updated submodules outside of refs/heads" && + + git -C sub1 update-ref refs/changes/11 $E && + git update-index --cacheinfo 160000 $E sub1 && + git commit -m "updated submodules outside of refs/heads" && + + git -C sub1 update-ref refs/changes/12 $F && + git update-index --cacheinfo 160000 $F sub1 && + git commit -m "updated submodules outside of refs/heads" && + + G=$(git rev-parse HEAD) && + git update-ref refs/changes/13 $G && + ( + cd downstream && + git fetch --recurse-submodules origin refs/changes/13 && + + git -C sub1 cat-file -t $D && + git -C sub1 cat-file -t $E && + git -C sub1 cat-file -t $F + ) +' + test_done diff --git a/t/t5528-push-default.sh b/t/t5528-push-default.sh index 4430956..4d1e0c3 100755 --- a/t/t5528-push-default.sh +++ b/t/t5528-push-default.sh @@ -163,7 +163,7 @@ test_pushdefault_workflow success current master # update parent1's foo (which is our upstream) test_pushdefault_workflow success upstream foo -# upsream is foo which is not the name of the current branch +# upstream is foo which is not the name of the current branch test_pushdefault_workflow failure simple master # master and foo are updated diff --git a/t/t5530-upload-pack-error.sh b/t/t5530-upload-pack-error.sh index 4f6e32b..4ce9a9f 100755 --- a/t/t5530-upload-pack-error.sh +++ b/t/t5530-upload-pack-error.sh @@ -14,7 +14,7 @@ corrupt_repo () { } test_expect_success 'setup and corrupt repository' ' - + test_oid_init && echo file >file && git add file && git rev-parse :file && @@ -31,9 +31,10 @@ test_expect_success 'fsck fails' ' ' test_expect_success 'upload-pack fails due to error in pack-objects packing' ' - - printf "0032want %s\n00000009done\n0000" \ - $(git rev-parse HEAD) >input && + head=$(git rev-parse HEAD) && + hexsz=$(test_oid hexsz) && + printf "%04xwant %s\n00000009done\n0000" \ + $(($hexsz + 10)) $head >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && test_i18ngrep "unable to read" output.err && test_i18ngrep "pack-objects died" output.err @@ -51,25 +52,38 @@ test_expect_success 'fsck fails' ' ' test_expect_success 'upload-pack fails due to error in rev-list' ' - printf "0032want %s\n0034shallow %s00000009done\n0000" \ - $(git rev-parse HEAD) $(git rev-parse HEAD^) >input && + printf "%04xwant %s\n%04xshallow %s00000009done\n0000" \ + $(($hexsz + 10)) $(git rev-parse HEAD) \ + $(($hexsz + 12)) $(git rev-parse HEAD^) >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "bad tree object" output.err ' -test_expect_success 'upload-pack error message when bad ref requested' ' +test_expect_success 'upload-pack fails due to bad want (no object)' ' + + printf "%04xwant %s multi_ack_detailed\n00000009done\n0000" \ + $(($hexsz + 29)) $(test_oid deadbeef) >input && + test_must_fail git upload-pack . <input >output 2>output.err && + grep "not our ref" output.err && + grep "ERR" output && + ! grep multi_ack_detailed output.err +' + +test_expect_success 'upload-pack fails due to bad want (not tip)' ' - printf "0045want %s multi_ack_detailed\n00000009done\n0000" \ - "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef" >input && + oid=$(echo an object we have | git hash-object -w --stdin) && + printf "%04xwant %s multi_ack_detailed\n00000009done\n0000" \ + $(($hexsz + 29)) "$oid" >input && test_must_fail git upload-pack . <input >output 2>output.err && - grep -q "not our ref" output.err && - ! grep -q multi_ack_detailed output.err + grep "not our ref" output.err && + grep "ERR" output && + ! grep multi_ack_detailed output.err ' test_expect_success 'upload-pack fails due to error in pack-objects enumeration' ' - printf "0032want %s\n00000009done\n0000" \ - $(git rev-parse HEAD) >input && + printf "%04xwant %s\n00000009done\n0000" \ + $((hexsz + 10)) $(git rev-parse HEAD) >input && test_must_fail git upload-pack . <input >/dev/null 2>output.err && grep "bad tree object" output.err && grep "pack-objects died" output.err diff --git a/t/t5531-deep-submodule-push.sh b/t/t5531-deep-submodule-push.sh index e2c37fd..4ad059e 100755 --- a/t/t5531-deep-submodule-push.sh +++ b/t/t5531-deep-submodule-push.sh @@ -363,7 +363,7 @@ test_expect_success 'push succeeds if submodule has no remote and is on the firs ) && git add b && git commit -m "added submodule" && - git push --recurse-submodule=check origin master + git push --recurse-submodules=check origin master ) ' diff --git a/t/t5535-fetch-push-symref.sh b/t/t5535-fetch-push-symref.sh index 8ed58d2..e8f6d23 100755 --- a/t/t5535-fetch-push-symref.sh +++ b/t/t5535-fetch-push-symref.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='avoiding conflicting update thru symref aliasing' +test_description='avoiding conflicting update through symref aliasing' . ./test-lib.sh diff --git a/t/t5537-fetch-shallow.sh b/t/t5537-fetch-shallow.sh index 6faf17e..4f681db 100755 --- a/t/t5537-fetch-shallow.sh +++ b/t/t5537-fetch-shallow.sh @@ -15,7 +15,11 @@ test_expect_success 'setup' ' commit 2 && commit 3 && commit 4 && - git config --global transfer.fsckObjects true + git config --global transfer.fsckObjects true && + test_oid_cache <<-EOF + perl sha1:s/0034shallow %s/0036unshallow %s/ + perl sha256:s/004cshallow %s/004eunshallow %s/ + EOF ' test_expect_success 'setup shallow clone' ' @@ -233,27 +237,29 @@ test_expect_success 'shallow fetches check connectivity before writing shallow f git -C "$REPO" config protocol.version 2 && git -C client config protocol.version 2 && - git -C client fetch --depth=2 "$HTTPD_URL/one_time_sed/repo" master:a_branch && + git -C client fetch --depth=2 "$HTTPD_URL/one_time_perl/repo" master:a_branch && # Craft a situation in which the server sends back an unshallow request # with an empty packfile. This is done by refetching with a shorter # depth (to ensure that the packfile is empty), and overwriting the # shallow line in the response with the unshallow line we want. - printf "s/0034shallow %s/0036unshallow %s/" \ + printf "$(test_oid perl)" \ "$(git -C "$REPO" rev-parse HEAD)" \ "$(git -C "$REPO" rev-parse HEAD^)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && - test_must_fail git -C client fetch --depth=1 "$HTTPD_URL/one_time_sed/repo" \ + >"$HTTPD_ROOT_PATH/one-time-perl" && + test_must_fail env GIT_TEST_SIDEBAND_ALL=0 git -C client \ + fetch --depth=1 "$HTTPD_URL/one_time_perl/repo" \ master:a_branch && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" && + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" && # Ensure that the resulting repo is consistent, despite our failure to # fetch. git -C client fsck ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5539-fetch-http-shallow.sh b/t/t5539-fetch-http-shallow.sh index 5fbf67c..c0d02de 100755 --- a/t/t5539-fetch-http-shallow.sh +++ b/t/t5539-fetch-http-shallow.sh @@ -67,7 +67,10 @@ test_expect_success 'no shallow lines after receiving ACK ready' ' cd clone && git checkout --orphan newnew && test_commit new-too && - GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" git fetch --depth=2 && + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + GIT_TRACE_PACKET="$TRASH_DIRECTORY/trace" GIT_TEST_PROTOCOL_VERSION=0 \ + git fetch --depth=2 && grep "fetch-pack< ACK .* ready" ../trace && ! grep "fetch-pack> done" ../trace ) @@ -146,5 +149,4 @@ test_expect_success 'fetching deepen' ' ) ' -stop_httpd test_done diff --git a/t/t5540-http-push-webdav.sh b/t/t5540-http-push-webdav.sh index 88ff5a4..d476c33 100755 --- a/t/t5540-http-push-webdav.sh +++ b/t/t5540-http-push-webdav.sh @@ -134,15 +134,13 @@ test_expect_success 'MKCOL sends directory names with trailing slashes' ' x1="[0-9a-f]" x2="$x1$x1" -x5="$x1$x1$x1$x1$x1" -x38="$x5$x5$x5$x5$x5$x5$x5$x1$x1$x1" -x40="$x38$x2" +xtrunc=$(echo $OID_REGEX | sed -e "s/\[0-9a-f\]\[0-9a-f\]//") test_expect_success 'PUT and MOVE sends object to URLs with SHA-1 hash suffix' ' sed \ -e "s/PUT /OP /" \ -e "s/MOVE /OP /" \ - -e "s|/objects/$x2/${x38}_$x40|WANTED_PATH_REQUEST|" \ + -e "s|/objects/$x2/${xtrunc}_$OID_REGEX|WANTED_PATH_REQUEST|" \ "$HTTPD_ROOT_PATH"/access.log | grep -e "\"OP .*WANTED_PATH_REQUEST HTTP/[.0-9]*\" 20[0-9] " @@ -176,6 +174,4 @@ test_expect_failure 'push to password-protected repository (no user in URL)' ' test_cmp expect actual ' -stop_httpd - test_done diff --git a/t/t5541-http-push-smart.sh b/t/t5541-http-push-smart.sh index 5475afc..23be8ce 100755 --- a/t/t5541-http-push-smart.sh +++ b/t/t5541-http-push-smart.sh @@ -47,7 +47,12 @@ test_expect_success 'no empty path components' ' cd "$ROOT_PATH" && git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone && - check_access_log exp + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 + then + check_access_log exp + fi ' test_expect_success 'clone remote repository' ' @@ -128,7 +133,12 @@ GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200 POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200 EOF test_expect_success 'used receive-pack service' ' - check_access_log exp + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 + then + check_access_log exp + fi ' test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \ @@ -167,6 +177,91 @@ test_expect_success 'push (chunked)' ' test $HEAD = $(git rev-parse --verify HEAD)) ' +test_expect_success 'push --atomic also prevents branch creation, reports collateral' ' + # Setup upstream repo - empty for now + d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git && + git init --bare "$d" && + test_config -C "$d" http.receivepack true && + up="$HTTPD_URL"/smart/atomic-branches.git && + + # Tell "$up" about three branches for now + test_commit atomic1 && + test_commit atomic2 && + git branch collateral && + git branch other && + git push "$up" master collateral other && + + # collateral is a valid push, but should be failed by atomic push + git checkout collateral && + test_commit collateral1 && + + # Make master incompatible with upstream to provoke atomic + git checkout master && + git reset --hard HEAD^ && + + # Add a new branch which should be failed by atomic push. This is a + # regression case. + git branch atomic && + + # --atomic should cause entire push to be rejected + test_must_fail git push --atomic "$up" master atomic collateral 2>output && + + # the new branch should not have been created upstream + test_must_fail git -C "$d" show-ref --verify refs/heads/atomic && + + # upstream should still reflect atomic2, the last thing we pushed + # successfully + git rev-parse atomic2 >expected && + # on master... + git -C "$d" rev-parse refs/heads/master >actual && + test_cmp expected actual && + # ...and collateral. + git -C "$d" rev-parse refs/heads/collateral >actual && + test_cmp expected actual && + + # the failed refs should be indicated to the user + grep "^ ! .*rejected.* master -> master" output && + + # the collateral failure refs should be indicated to the user + grep "^ ! .*rejected.* atomic -> atomic .*atomic push failed" output && + grep "^ ! .*rejected.* collateral -> collateral .*atomic push failed" output +' + +test_expect_success 'push --atomic fails on server-side errors' ' + # Use previously set up repository + d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git && + test_config -C "$d" http.receivepack true && + up="$HTTPD_URL"/smart/atomic-branches.git && + + # break ref updates for other on the remote site + mkdir "$d/refs/heads/other.lock" && + + # add the new commit to other + git branch -f other collateral && + + # --atomic should cause entire push to be rejected + test_must_fail git push --atomic "$up" atomic other 2>output && + + # the new branch should not have been created upstream + test_must_fail git -C "$d" show-ref --verify refs/heads/atomic && + + # upstream should still reflect atomic2, the last thing we pushed + # successfully + git rev-parse atomic2 >expected && + # ...to other. + git -C "$d" rev-parse refs/heads/other >actual && + test_cmp expected actual && + + # the new branch should not have been created upstream + test_must_fail git -C "$d" show-ref --verify refs/heads/atomic && + + # the failed refs should be indicated to the user + grep "^ ! .*rejected.* other -> other .*atomic transaction failed" output && + + # the collateral failure refs should be indicated to the user + grep "^ ! .*rejected.* atomic -> atomic .*atomic transaction failed" output +' + test_expect_success 'push --all can push to empty repo' ' d=$HTTPD_DOCUMENT_ROOT_PATH/empty-all.git && git init --bare "$d" && @@ -373,5 +468,4 @@ test_expect_success 'colorize errors/hints' ' test_i18ngrep ! "^hint: " decoded ' -stop_httpd test_done diff --git a/t/t5542-push-http-shallow.sh b/t/t5542-push-http-shallow.sh index 5165833..ddc1db7 100755 --- a/t/t5542-push-http-shallow.sh +++ b/t/t5542-push-http-shallow.sh @@ -90,5 +90,4 @@ EOF ) ' -stop_httpd test_done diff --git a/t/t5545-push-options.sh b/t/t5545-push-options.sh index b47a958..38e6f73 100755 --- a/t/t5545-push-options.sh +++ b/t/t5545-push-options.sh @@ -115,7 +115,7 @@ test_expect_success 'push options and submodules' ' git -C parent submodule add ../upstream workbench && git -C parent/workbench remote add up ../../upstream && - git -C parent commit -m "add submoule" && + git -C parent commit -m "add submodule" && test_commit -C parent/workbench two && git -C parent add workbench && @@ -278,6 +278,7 @@ test_expect_success 'push options keep quoted characters intact (http)' ' test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH"/upstream.git/hooks/pre-receive.push_options ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5550-http-fetch-dumb.sh b/t/t5550-http-fetch-dumb.sh index 6d7d88c..b811d89 100755 --- a/t/t5550-http-fetch-dumb.sh +++ b/t/t5550-http-fetch-dumb.sh @@ -408,5 +408,20 @@ test_expect_success 'print HTTP error when any intermediate redirect throws erro test_i18ngrep "unable to access.*/redir-to/502" stderr ' -stop_httpd +test_expect_success 'fetching via http alternates works' ' + parent=$HTTPD_DOCUMENT_ROOT_PATH/alt-parent.git && + git init --bare "$parent" && + git -C "$parent" --work-tree=. commit --allow-empty -m foo && + git -C "$parent" update-server-info && + commit=$(git -C "$parent" rev-parse HEAD) && + + child=$HTTPD_DOCUMENT_ROOT_PATH/alt-child.git && + git init --bare "$child" && + echo "../../alt-parent.git/objects" >"$child/objects/info/alternates" && + git -C "$child" update-ref HEAD $commit && + git -C "$child" update-server-info && + + git -c http.followredirects=true clone "$HTTPD_URL/dumb/alt-child.git" +' + test_done diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 8630b0c..6788aef 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -43,7 +43,8 @@ test_expect_success 'clone http repository' ' < Cache-Control: no-cache, max-age=0, must-revalidate < Content-Type: application/x-git-upload-pack-result EOF - GIT_TRACE_CURL=true git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && + GIT_TRACE_CURL=true GIT_TEST_PROTOCOL_VERSION=0 \ + git clone --quiet $HTTPD_URL/smart/repo.git clone 2>err && test_cmp file clone/file && tr '\''\015'\'' Q <err | sed -e " @@ -80,12 +81,18 @@ test_expect_success 'clone http repository' ' /^< Content-Length: /d /^< Transfer-Encoding: /d " >actual && - sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ - actual >actual.smudged && - test_cmp exp actual.smudged && - grep "Accept-Encoding:.*gzip" actual >actual.gzip && - test_line_count = 2 actual.gzip + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 + then + sed -e "s/^> Accept-Encoding: .*/> Accept-Encoding: ENCODINGS/" \ + actual >actual.smudged && + test_cmp exp actual.smudged && + + grep "Accept-Encoding:.*gzip" actual >actual.gzip && + test_line_count = 2 actual.gzip + fi ' test_expect_success 'fetch changes via http' ' @@ -103,7 +110,13 @@ test_expect_success 'used upload-pack service' ' GET /smart/repo.git/info/refs?service=git-upload-pack HTTP/1.1 200 POST /smart/repo.git/git-upload-pack HTTP/1.1 200 EOF - check_access_log exp + + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 + then + check_access_log exp + fi ' test_expect_success 'follow redirects (301)' ' @@ -151,7 +164,17 @@ test_expect_success 'clone from auth-only-for-objects repository' ' test_expect_success 'no-op half-auth fetch does not require a password' ' set_askpass wrong && - git --git-dir=half-auth fetch && + + # NEEDSWORK: When using HTTP(S), protocol v0 supports a "half-auth" + # configuration with authentication required only when downloading + # objects and not refs, by having the HTTP server only require + # authentication for the "git-upload-pack" path and not "info/refs". + # This is not possible with protocol v2, since both objects and refs + # are obtained from the "git-upload-pack" path. A solution to this is + # to teach the server and client to be able to inline ls-refs requests + # as an Extra Parameter (see pack-protocol.txt), so that "info/refs" + # can serve refs, just like it does in protocol v0. + GIT_TEST_PROTOCOL_VERSION=0 git --git-dir=half-auth fetch && expect_askpass none ' @@ -176,7 +199,7 @@ test_expect_success 'GIT_SMART_HTTP can disable smart http' ' test_expect_success 'invalid Content-Type rejected' ' test_must_fail git clone $HTTPD_URL/broken_smart/repo.git 2>actual && - grep "not valid:" actual + test_i18ngrep "not valid:" actual ' test_expect_success 'create namespaced refs' ' @@ -215,8 +238,14 @@ test_expect_success 'cookies stored in http.cookiefile when http.savecookies set git config http.cookiefile cookies.txt && git config http.savecookies true && git ls-remote $HTTPD_URL/smart_cookies/repo.git master && - tail -3 cookies.txt | sort >cookies_tail.txt && - test_cmp expect_cookies.txt cookies_tail.txt + + # NEEDSWORK: If the overspecification of the expected result is reduced, we + # might be able to run this test in all protocol versions. + if test "$GIT_TEST_PROTOCOL_VERSION" = 0 + then + tail -3 cookies.txt | sort >cookies_tail.txt && + test_cmp expect_cookies.txt cookies_tail.txt + fi ' test_expect_success 'transfer.hiderefs works over smart-http' ' @@ -272,11 +301,10 @@ test_expect_success CMDLINE_LIMIT \ ) ' -test_expect_success 'large fetch-pack requests can be split across POSTs' ' +test_expect_success 'large fetch-pack requests can be sent using chunked encoding' ' GIT_TRACE_CURL=true git -c http.postbuffer=65536 \ clone --bare "$HTTPD_URL/smart/repo.git" split.git 2>err && - grep "^=> Send header: POST" err >posts && - test_line_count = 2 posts + grep "^=> Send header: Transfer-Encoding: chunked" err ' test_expect_success 'test allowreachablesha1inwant' ' @@ -306,7 +334,10 @@ test_expect_success 'test allowreachablesha1inwant with unreachable' ' git init --bare test_reachable.git && git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && - test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" ' test_expect_success 'test allowanysha1inwant with unreachable' ' @@ -325,7 +356,10 @@ test_expect_success 'test allowanysha1inwant with unreachable' ' git init --bare test_reachable.git && git -C test_reachable.git remote add origin "$HTTPD_URL/smart/repo.git" && - test_must_fail git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" && git -C "$server" config uploadpack.allowanysha1inwant 1 && git -C test_reachable.git fetch origin "$(git rev-parse HEAD)" @@ -429,5 +463,9 @@ test_expect_success 'GIT_TRACE_CURL_NO_DATA prevents data from being traced' ' ! grep "=> Send data" err ' -stop_httpd +test_expect_success 'server-side error detected' ' + test_must_fail git clone $HTTPD_URL/error_smart/repo.git 2>actual && + test_i18ngrep "server-side error" actual +' + test_done diff --git a/t/t5552-skipping-fetch-negotiator.sh b/t/t5552-skipping-fetch-negotiator.sh index 30857b8..156c704 100755 --- a/t/t5552-skipping-fetch-negotiator.sh +++ b/t/t5552-skipping-fetch-negotiator.sh @@ -60,29 +60,6 @@ test_expect_success 'commits with no parents are sent regardless of skip distanc have_not_sent c6 c4 c3 ' -test_expect_success 'unknown fetch.negotiationAlgorithm values error out' ' - rm -rf server client trace && - git init server && - test_commit -C server to_fetch && - - git init client && - test_commit -C client on_client && - git -C client checkout on_client && - - test_config -C client fetch.negotiationAlgorithm invalid && - test_must_fail git -C client fetch "$(pwd)/server" 2>err && - test_i18ngrep "unknown fetch negotiation algorithm" err && - - # Explicit "default" value - test_config -C client fetch.negotiationAlgorithm default && - git -C client -c fetch.negotiationAlgorithm=default fetch "$(pwd)/server" && - - # Implementation detail: If there is nothing to fetch, we will not error out - test_config -C client fetch.negotiationAlgorithm invalid && - git -C client fetch "$(pwd)/server" 2>err && - test_i18ngrep ! "unknown fetch negotiation algorithm" err -' - test_expect_success 'when two skips collide, favor the larger one' ' rm -rf server client trace && git init server && @@ -127,7 +104,14 @@ test_expect_success 'use ref advertisement to filter out commits' ' # not need to send any ancestors of "c3", but we still need to send "c3" # itself. test_config -C client fetch.negotiationalgorithm skipping && - trace_fetch client origin to_fetch && + + # The ref advertisement itself is filtered when protocol v2 is used, so + # use v0. + ( + GIT_TEST_PROTOCOL_VERSION=0 && + export GIT_TEST_PROTOCOL_VERSION && + trace_fetch client origin to_fetch + ) && have_sent c5 c4^ c2side && have_not_sent c4 c4^^ c4^^^ ' @@ -189,7 +173,17 @@ test_expect_success 'do not send "have" with ancestors of commits that server AC test_commit -C server commit-on-b1 && test_config -C client fetch.negotiationalgorithm skipping && - trace_fetch client "$(pwd)/server" to_fetch && + + # NEEDSWORK: The number of "have"s sent depends on whether the transport + # is stateful. If the overspecification of the result were reduced, this + # test could be used for both stateful and stateless transports. + ( + # Force protocol v0, in which local transport is stateful (in + # protocol v2 it is stateless). + GIT_TEST_PROTOCOL_VERSION=0 && + export GIT_TEST_PROTOCOL_VERSION && + trace_fetch client "$(pwd)/server" to_fetch + ) && grep " fetch" trace && # fetch-pack sends 2 requests each containing 16 "have" lines before diff --git a/t/t5553-set-upstream.sh b/t/t5553-set-upstream.sh new file mode 100755 index 0000000..81975ad --- /dev/null +++ b/t/t5553-set-upstream.sh @@ -0,0 +1,178 @@ +#!/bin/sh + +test_description='"git fetch/pull --set-upstream" basic tests.' +. ./test-lib.sh + +check_config () { + printf "%s\n" "$2" "$3" >"expect.$1" && + { + git config "branch.$1.remote" && git config "branch.$1.merge" + } >"actual.$1" && + test_cmp "expect.$1" "actual.$1" +} + +check_config_missing () { + test_expect_code 1 git config "branch.$1.remote" && + test_expect_code 1 git config "branch.$1.merge" +} + +clear_config () { + for branch in "$@"; do + test_might_fail git config --unset-all "branch.$branch.remote" + test_might_fail git config --unset-all "branch.$branch.merge" + done +} + +ensure_fresh_upstream () { + rm -rf parent && git init --bare parent +} + +test_expect_success 'setup bare parent fetch' ' + ensure_fresh_upstream && + git remote add upstream parent +' + +test_expect_success 'setup commit on master and other fetch' ' + test_commit one && + git push upstream master && + git checkout -b other && + test_commit two && + git push upstream other +' + +# tests for fetch --set-upstream + +test_expect_success 'fetch --set-upstream does not set upstream w/o branch' ' + clear_config master other && + git checkout master && + git fetch --set-upstream upstream && + check_config_missing master && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream upstream master sets branch master but not other' ' + clear_config master other && + git fetch --set-upstream upstream master && + check_config master upstream refs/heads/master && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream upstream other sets branch other' ' + clear_config master other && + git fetch --set-upstream upstream other && + check_config master upstream refs/heads/other && + check_config_missing other +' + +test_expect_success 'fetch --set-upstream master:other does not set the branch other2' ' + clear_config other2 && + git fetch --set-upstream upstream master:other2 && + check_config_missing other2 +' + +test_expect_success 'fetch --set-upstream http://nosuchdomain.example.com fails with invalid url' ' + # master explicitly not cleared, we check that it is not touched from previous value + clear_config other other2 && + test_must_fail git fetch --set-upstream http://nosuchdomain.example.com && + check_config master upstream refs/heads/other && + check_config_missing other && + check_config_missing other2 +' + +test_expect_success 'fetch --set-upstream with valid URL sets upstream to URL' ' + clear_config other other2 && + url="file://'"$PWD"'" && + git fetch --set-upstream "$url" && + check_config master "$url" HEAD && + check_config_missing other && + check_config_missing other2 +' + +# tests for pull --set-upstream + +test_expect_success 'setup bare parent pull' ' + git remote rm upstream && + ensure_fresh_upstream && + git remote add upstream parent +' + +test_expect_success 'setup commit on master and other pull' ' + test_commit three && + git push --tags upstream master && + test_commit four && + git push upstream other +' + +test_expect_success 'pull --set-upstream upstream master sets branch master but not other' ' + clear_config master other && + git pull --set-upstream upstream master && + check_config master upstream refs/heads/master && + check_config_missing other +' + +test_expect_success 'pull --set-upstream master:other2 does not set the branch other2' ' + clear_config other2 && + git pull --set-upstream upstream master:other2 && + check_config_missing other2 +' + +test_expect_success 'pull --set-upstream upstream other sets branch master' ' + clear_config master other && + git pull --set-upstream upstream other && + check_config master upstream refs/heads/other && + check_config_missing other +' + +test_expect_success 'pull --set-upstream upstream tag does not set the tag' ' + clear_config three && + git pull --tags --set-upstream upstream three && + check_config_missing three +' + +test_expect_success 'pull --set-upstream http://nosuchdomain.example.com fails with invalid url' ' + # master explicitly not cleared, we check that it is not touched from previous value + clear_config other other2 three && + test_must_fail git pull --set-upstream http://nosuchdomain.example.com && + check_config master upstream refs/heads/other && + check_config_missing other && + check_config_missing other2 && + check_config_missing three +' + +test_expect_success 'pull --set-upstream upstream HEAD sets branch HEAD' ' + clear_config master other && + git pull --set-upstream upstream HEAD && + check_config master upstream HEAD && + git checkout other && + git pull --set-upstream upstream HEAD && + check_config other upstream HEAD +' + +test_expect_success 'pull --set-upstream upstream with more than one branch does nothing' ' + clear_config master three && + git pull --set-upstream upstream master three && + check_config_missing master && + check_config_missing three +' + +test_expect_success 'pull --set-upstream with valid URL sets upstream to URL' ' + clear_config master other other2 && + git checkout master && + url="file://'"$PWD"'" && + git pull --set-upstream "$url" && + check_config master "$url" HEAD && + check_config_missing other && + check_config_missing other2 +' + +test_expect_success 'pull --set-upstream with valid URL and branch sets branch' ' + clear_config master other other2 && + git checkout master && + url="file://'"$PWD"'" && + git pull --set-upstream "$url" master && + check_config master "$url" refs/heads/master && + check_config_missing other && + check_config_missing other2 +' + +test_done diff --git a/t/t5561-http-backend.sh b/t/t5561-http-backend.sh index 1c49054..6eb0294 100755 --- a/t/t5561-http-backend.sh +++ b/t/t5561-http-backend.sh @@ -132,5 +132,4 @@ test_expect_success 'server request log matches test results' ' check_access_log exp ' -stop_httpd test_done diff --git a/t/t5562-http-backend-content-length.sh b/t/t5562-http-backend-content-length.sh index 90d890d..4a110b3 100755 --- a/t/t5562-http-backend-content-length.sh +++ b/t/t5562-http-backend-content-length.sh @@ -8,12 +8,12 @@ test_lazy_prereq GZIP 'gzip --version' verify_http_result() { # some fatal errors still produce status 200 # so check if there is the error message - if grep 'fatal:' act.err + if grep 'fatal:' act.err.$test_count then return 1 fi - if ! grep "Status" act.out >act + if ! grep "Status" act.out.$test_count >act then printf "Status: 200 OK\r\n" >act fi @@ -33,7 +33,7 @@ test_http_env() { REQUEST_METHOD=POST \ "$PERL_PATH" \ "$TEST_DIRECTORY"/t5562/invoke-with-content-length.pl \ - "$request_body" git http-backend >act.out 2>act.err + "$request_body" git http-backend >act.out.$test_count 2>act.err.$test_count } ssize_b100dots() { @@ -59,7 +59,7 @@ test_expect_success 'setup' ' printf done | packetize >>fetch_body && test_copy_bytes 10 <fetch_body >fetch_body.trunc && hash_next=$(git commit-tree -p HEAD -m next HEAD^{tree}) && - printf "%s %s refs/heads/newbranch\\0report-status\\n" "$_z40" "$hash_next" | packetize >push_body && + printf "%s %s refs/heads/newbranch\\0report-status\\n" "$ZERO_OID" "$hash_next" | packetize >push_body && printf 0000 >>push_body && echo "$hash_next" | git pack-objects --stdout >>push_body && test_copy_bytes 10 <push_body >push_body.trunc && @@ -150,7 +150,7 @@ test_expect_success 'CONTENT_LENGTH overflow ssite_t' ' GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=POST \ CONTENT_LENGTH="$NOT_FIT_IN_SSIZE" \ - git http-backend </dev/zero >/dev/null 2>err && + git http-backend </dev/null >/dev/null 2>err && grep "fatal:.*CONTENT_LENGTH" err ' @@ -161,7 +161,7 @@ test_expect_success 'empty CONTENT_LENGTH' ' GIT_HTTP_EXPORT_ALL=TRUE \ REQUEST_METHOD=GET \ CONTENT_LENGTH="" \ - git http-backend <empty_body >act.out 2>act.err && + git http-backend <empty_body >act.out.$test_count 2>act.err.$test_count && verify_http_result "200 OK" ' diff --git a/t/t5570-git-daemon.sh b/t/t5570-git-daemon.sh index 7466aad..34487bb 100755 --- a/t/t5570-git-daemon.sh +++ b/t/t5570-git-daemon.sh @@ -90,6 +90,7 @@ test_expect_success 'fetch notices corrupt pack' ' test_expect_success 'fetch notices corrupt idx' ' cp -R "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_pack.git "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && (cd "$GIT_DAEMON_DOCUMENT_ROOT_PATH"/repo_bad2.git && + rm -f objects/pack/multi-pack-index && p=$(ls objects/pack/pack-*.idx) && chmod u+w $p && printf %0256d 0 | dd of=$p bs=256 count=1 seek=1 conv=notrunc @@ -183,19 +184,6 @@ test_expect_success 'hostname cannot break out of directory' ' git ls-remote "$GIT_DAEMON_URL/escape.git" ' -test_expect_success 'daemon log records all attributes' ' - cat >expect <<-\EOF && - Extended attribute "host": localhost - Extended attribute "protocol": version=1 - EOF - >daemon.log && - GIT_OVERRIDE_VIRTUAL_HOST=localhost \ - git -c protocol.version=1 \ - ls-remote "$GIT_DAEMON_URL/interp.git" && - grep -i extended.attribute daemon.log | cut -d" " -f2- >actual && - test_cmp expect actual -' - test_expect_success FAKENC 'hostname interpolation works after LF-stripping' ' { printf "git-upload-pack /interp.git\n\0host=localhost" | packetize @@ -211,5 +199,4 @@ test_expect_success FAKENC 'hostname interpolation works after LF-stripping' ' test_cmp expect actual ' -stop_git_daemon test_done diff --git a/t/t5573-pull-verify-signatures.sh b/t/t5573-pull-verify-signatures.sh index 3e9876e..a53dd85 100755 --- a/t/t5573-pull-verify-signatures.sh +++ b/t/t5573-pull-verify-signatures.sh @@ -60,6 +60,27 @@ test_expect_success GPG 'pull commit with untrusted signature with --verify-sign test_i18ngrep "has an untrusted GPG signature" pullerror ' +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=ultimate' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel ultimate && + test_must_fail git pull --ff-only --verify-signatures untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=marginal' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel marginal && + test_must_fail git pull --ff-only --verify-signatures untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit with untrusted signature with --verify-signatures and minTrustLevel=undefined' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel undefined && + git pull --ff-only --verify-signatures untrusted >pulloutput && + test_i18ngrep "has a good GPG signature" pulloutput +' + test_expect_success GPG 'pull signed commit with --verify-signatures' ' test_when_finished "git reset --hard && git checkout initial" && git pull --verify-signatures signed >pulloutput && @@ -79,10 +100,53 @@ test_expect_success GPG 'pull commit with bad signature with --no-verify-signatu ' test_expect_success GPG 'pull unsigned commit into unborn branch' ' + test_when_finished "rm -rf empty-repo" && git init empty-repo && test_must_fail \ git -C empty-repo pull --verify-signatures .. 2>pullerror && test_i18ngrep "does not have a GPG signature" pullerror ' +test_expect_success GPG 'pull commit into unborn branch with bad signature and --verify-signatures' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../bad 2>pullerror && + test_i18ngrep "has a bad GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=ultimate' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel ultimate && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=marginal' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel marginal && + test_must_fail \ + git -C empty-repo pull --ff-only --verify-signatures ../untrusted 2>pullerror && + test_i18ngrep "has an untrusted GPG signature" pullerror +' + +test_expect_success GPG 'pull commit into unborn branch with untrusted signature and --verify-signatures and minTrustLevel=undefined' ' + test_when_finished "rm -rf empty-repo" && + git init empty-repo && + test_config_global gpg.minTrustLevel undefined && + git -C empty-repo pull --ff-only --verify-signatures ../untrusted >pulloutput && + test_i18ngrep "has a good GPG signature" pulloutput +' + test_done diff --git a/t/t5580-clone-push-unc.sh b/t/t5580-unc-paths.sh index ba548df..cf768b3 100755 --- a/t/t5580-clone-push-unc.sh +++ b/t/t5580-unc-paths.sh @@ -40,6 +40,23 @@ test_expect_success clone ' git clone "file://$UNCPATH" clone ' +test_expect_success 'clone without file://' ' + git clone "$UNCPATH" clone-without-file +' + +test_expect_success 'clone with backslashed path' ' + BACKSLASHED="$(echo "$UNCPATH" | tr / \\\\)" && + git clone "$BACKSLASHED" backslashed +' + +test_expect_success fetch ' + git init to-fetch && + ( + cd to-fetch && + git fetch "$UNCPATH" master + ) +' + test_expect_success push ' ( cd clone && @@ -53,8 +70,20 @@ test_expect_success push ' test_expect_success MINGW 'remote nick cannot contain backslashes' ' BACKSLASHED="$(winpwd | tr / \\\\)" && - git ls-remote "$BACKSLASHED" >out 2>err && + git ls-remote "$BACKSLASHED" 2>err && test_i18ngrep ! "unable to access" err ' +test_expect_success 'unc alternates' ' + tree="$(git rev-parse HEAD:)" && + mkdir test-unc-alternate && + ( + cd test-unc-alternate && + git init && + test_must_fail git show $tree && + echo "$UNCPATH/.git/objects" >.git/objects/info/alternates && + git show $tree + ) +' + test_done diff --git a/t/t5581-http-curl-verbose.sh b/t/t5581-http-curl-verbose.sh new file mode 100755 index 0000000..5129b07 --- /dev/null +++ b/t/t5581-http-curl-verbose.sh @@ -0,0 +1,26 @@ +#!/bin/sh + +test_description='test GIT_CURL_VERBOSE' +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +test_expect_success 'setup repository' ' + mkdir "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" --bare init && + git config push.default matching && + echo content >file && + git add file && + git commit -m one && + git remote add public "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + git push public master:master +' + +test_expect_success 'failure in git-upload-pack is shown' ' + test_might_fail env GIT_CURL_VERBOSE=1 \ + git clone "$HTTPD_URL/error_git_upload_pack/smart/repo.git" \ + 2>curl_log && + grep "< HTTP/1.1 500 Intentional Breakage" curl_log +' + +test_done diff --git a/t/t5601-clone.sh b/t/t5601-clone.sh index 8bbc706..84ea2a3 100755 --- a/t/t5601-clone.sh +++ b/t/t5601-clone.sh @@ -345,7 +345,7 @@ expect_ssh () { } test_expect_success 'clone myhost:src uses ssh' ' - git clone myhost:src ssh-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone myhost:src ssh-clone && expect_ssh myhost src ' @@ -356,12 +356,12 @@ test_expect_success !MINGW,!CYGWIN 'clone local path foo:bar' ' ' test_expect_success 'bracketed hostnames are still ssh' ' - git clone "[myhost:123]:src" ssh-bracket-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone && expect_ssh "-p 123" myhost src ' test_expect_success 'OpenSSH variant passes -4' ' - git clone -4 "[myhost:123]:src" ssh-ipv4-clone && + GIT_TEST_PROTOCOL_VERSION=0 git clone -4 "[myhost:123]:src" ssh-ipv4-clone && expect_ssh "-4 -p 123" myhost src ' @@ -405,7 +405,7 @@ test_expect_success 'OpenSSH-like uplink is treated as ssh' ' test_when_finished "rm -f \"\$TRASH_DIRECTORY/uplink\"" && GIT_SSH="$TRASH_DIRECTORY/uplink" && test_when_finished "GIT_SSH=\"\$TRASH_DIRECTORY/ssh\$X\"" && - git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && + GIT_TEST_PROTOCOL_VERSION=0 git clone "[myhost:123]:src" ssh-bracket-clone-sshlike-uplink && expect_ssh "-p 123" myhost src ' @@ -434,7 +434,6 @@ test_expect_success 'double quoted plink.exe in GIT_SSH_COMMAND' ' expect_ssh "-v -P 123" myhost src ' -SQ="'" test_expect_success 'single quoted plink.exe in GIT_SSH_COMMAND' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink.exe" && GIT_SSH_COMMAND="$SQ$TRASH_DIRECTORY/plink.exe$SQ -v" \ @@ -444,14 +443,14 @@ test_expect_success 'single quoted plink.exe in GIT_SSH_COMMAND' ' test_expect_success 'GIT_SSH_VARIANT overrides plink detection' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && - GIT_SSH_VARIANT=ssh \ - git clone "[myhost:123]:src" ssh-bracket-clone-variant-1 && + GIT_TEST_PROTOCOL_VERSION=0 GIT_SSH_VARIANT=ssh \ + git clone "[myhost:123]:src" ssh-bracket-clone-variant-1 && expect_ssh "-p 123" myhost src ' test_expect_success 'ssh.variant overrides plink detection' ' copy_ssh_wrapper_as "$TRASH_DIRECTORY/plink" && - git -c ssh.variant=ssh \ + GIT_TEST_PROTOCOL_VERSION=0 git -c ssh.variant=ssh \ clone "[myhost:123]:src" ssh-bracket-clone-variant-2 && expect_ssh "-p 123" myhost src ' @@ -482,12 +481,12 @@ counter=0 # $3 path test_clone_url () { counter=$(($counter + 1)) - test_might_fail git clone "$1" tmp$counter && + test_might_fail env GIT_TEST_PROTOCOL_VERSION=0 git clone "$1" tmp$counter && shift && expect_ssh "$@" } -test_expect_success !MINGW 'clone c:temp is ssl' ' +test_expect_success !MINGW,!CYGWIN 'clone c:temp is ssl' ' test_clone_url c:temp c temp ' @@ -611,10 +610,6 @@ test_expect_success 'GIT_TRACE_PACKFILE produces a usable pack' ' git -C replay.git index-pack -v --stdin <tmp.pack ' -hex2oct () { - perl -ne 'printf "\\%03o", hex for /../g' -} - test_expect_success 'clone on case-insensitive fs' ' git init icasefs && ( @@ -634,26 +629,32 @@ test_expect_success CASE_INSENSITIVE_FS 'colliding file detection' ' test_i18ngrep "the following paths have collided" icasefs/warning ' -partial_clone () { +partial_clone_server () { SERVER="$1" && - URL="$2" && rm -rf "$SERVER" client && test_create_repo "$SERVER" && test_commit -C "$SERVER" one && - HASH1=$(git hash-object "$SERVER/one.t") && + HASH1=$(git -C "$SERVER" hash-object one.t) && git -C "$SERVER" revert HEAD && test_commit -C "$SERVER" two && - HASH2=$(git hash-object "$SERVER/two.t") && + HASH2=$(git -C "$SERVER" hash-object two.t) && test_config -C "$SERVER" uploadpack.allowfilter 1 && - test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 +} +partial_clone () { + SERVER="$1" && + URL="$2" && + + partial_clone_server "${SERVER}" && git clone --filter=blob:limit=0 "$URL" client && git -C client fsck && # Ensure that unneeded blobs are not inadvertently fetched. - test_config -C client extensions.partialclone "not a remote" && + test_config -C client remote.origin.promisor "false" && + git -C client config --unset remote.origin.partialclonefilter && test_must_fail git -C client cat-file -e "$HASH1" && # But this blob was fetched, because clone performs an initial checkout @@ -664,6 +665,11 @@ test_expect_success 'partial clone' ' partial_clone server "file://$(pwd)/server" ' +test_expect_success 'partial clone with -o' ' + partial_clone_server server && + git clone -o blah --filter=blob:limit=0 "file://$(pwd)/server" client +' + test_expect_success 'partial clone: warn if server does not support object filtering' ' rm -rf server client && test_create_repo server && @@ -733,6 +739,7 @@ test_expect_success 'partial clone using HTTP' ' partial_clone "$HTTPD_DOCUMENT_ROOT_PATH/server" "$HTTPD_URL/smart/server" ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5604-clone-reference.sh b/t/t5604-clone-reference.sh index 4320082..0c74b4e 100755 --- a/t/t5604-clone-reference.sh +++ b/t/t5604-clone-reference.sh @@ -221,4 +221,138 @@ test_expect_success 'clone, dissociate from alternates' ' ( cd C && git fsck ) ' +test_expect_success 'setup repo with garbage in objects/*' ' + git init S && + ( + cd S && + test_commit A && + + cd .git/objects && + >.some-hidden-file && + >some-file && + mkdir .some-hidden-dir && + >.some-hidden-dir/some-file && + >.some-hidden-dir/.some-dot-file && + mkdir some-dir && + >some-dir/some-file && + >some-dir/.some-dot-file + ) +' + +test_expect_success 'clone a repo with garbage in objects/*' ' + for option in --local --no-hardlinks --shared --dissociate + do + git clone $option S S$option || return 1 && + git -C S$option fsck || return 1 + done && + find S-* -name "*some*" | sort >actual && + cat >expected <<-EOF && + S--dissociate/.git/objects/.some-hidden-dir + S--dissociate/.git/objects/.some-hidden-dir/.some-dot-file + S--dissociate/.git/objects/.some-hidden-dir/some-file + S--dissociate/.git/objects/.some-hidden-file + S--dissociate/.git/objects/some-dir + S--dissociate/.git/objects/some-dir/.some-dot-file + S--dissociate/.git/objects/some-dir/some-file + S--dissociate/.git/objects/some-file + S--local/.git/objects/.some-hidden-dir + S--local/.git/objects/.some-hidden-dir/.some-dot-file + S--local/.git/objects/.some-hidden-dir/some-file + S--local/.git/objects/.some-hidden-file + S--local/.git/objects/some-dir + S--local/.git/objects/some-dir/.some-dot-file + S--local/.git/objects/some-dir/some-file + S--local/.git/objects/some-file + S--no-hardlinks/.git/objects/.some-hidden-dir + S--no-hardlinks/.git/objects/.some-hidden-dir/.some-dot-file + S--no-hardlinks/.git/objects/.some-hidden-dir/some-file + S--no-hardlinks/.git/objects/.some-hidden-file + S--no-hardlinks/.git/objects/some-dir + S--no-hardlinks/.git/objects/some-dir/.some-dot-file + S--no-hardlinks/.git/objects/some-dir/some-file + S--no-hardlinks/.git/objects/some-file + EOF + test_cmp expected actual +' + +test_expect_success SYMLINKS 'setup repo with manually symlinked or unknown files at objects/' ' + git init T && + ( + cd T && + git config gc.auto 0 && + test_commit A && + git gc && + test_commit B && + + cd .git/objects && + mv pack packs && + ln -s packs pack && + find ?? -type d >loose-dirs && + last_loose=$(tail -n 1 loose-dirs) && + mv $last_loose a-loose-dir && + ln -s a-loose-dir $last_loose && + first_loose=$(head -n 1 loose-dirs) && + rm -f loose-dirs && + + cd $first_loose && + obj=$(ls *) && + mv $obj ../an-object && + ln -s ../an-object $obj && + + cd ../ && + find . -type f | sort >../../../T.objects-files.raw && + find . -type l | sort >../../../T.objects-symlinks.raw && + echo unknown_content >unknown_file + ) && + git -C T fsck && + git -C T rev-list --all --objects >T.objects +' + + +test_expect_success SYMLINKS 'clone repo with symlinked or unknown files at objects/' ' + for option in --local --no-hardlinks --shared --dissociate + do + git clone $option T T$option || return 1 && + git -C T$option fsck || return 1 && + git -C T$option rev-list --all --objects >T$option.objects && + test_cmp T.objects T$option.objects && + ( + cd T$option/.git/objects && + find . -type f | sort >../../../T$option.objects-files.raw && + find . -type l | sort >../../../T$option.objects-symlinks.raw + ) + done && + + for raw in $(ls T*.raw) + do + sed -e "s!/../!/Y/!; s![0-9a-f]\{38,\}!Z!" -e "/commit-graph/d" \ + -e "/multi-pack-index/d" <$raw >$raw.de-sha-1 && + sort $raw.de-sha-1 >$raw.de-sha || return 1 + done && + + cat >expected-files <<-EOF && + ./Y/Z + ./Y/Z + ./Y/Z + ./a-loose-dir/Z + ./an-object + ./info/packs + ./pack/pack-Z.idx + ./pack/pack-Z.pack + ./packs/pack-Z.idx + ./packs/pack-Z.pack + ./unknown_file + EOF + + for option in --local --no-hardlinks --dissociate + do + test_cmp expected-files T$option.objects-files.raw.de-sha || return 1 && + test_must_be_empty T$option.objects-symlinks.raw.de-sha || return 1 + done && + + echo ./info/alternates >expected-files && + test_cmp expected-files T--shared.objects-files.raw && + test_must_be_empty T--shared.objects-symlinks.raw +' + test_done diff --git a/t/t5607-clone-bundle.sh b/t/t5607-clone-bundle.sh index cf39e9e..9108ff6 100755 --- a/t/t5607-clone-bundle.sh +++ b/t/t5607-clone-bundle.sh @@ -14,6 +14,12 @@ test_expect_success 'setup' ' git tag -d third ' +test_expect_success '"verify" needs a worktree' ' + git bundle create tip.bundle -1 master && + test_must_fail nongit git bundle verify ../tip.bundle 2>err && + test_i18ngrep "need a repository" err +' + test_expect_success 'annotated tags can be excluded by rev-list options' ' git bundle create bundle --all --since=7.Apr.2005.15:14:00.-0700 && git ls-remote bundle > output && @@ -58,7 +64,7 @@ test_expect_success 'ridiculously long subject in boundary' ' test -s heads && git fetch long-subject-bundle.bdl && sed -n "/^-/{p;q;}" long-subject-bundle.bdl >boundary && - grep "^-[0-9a-f]\\{40\\} " boundary + grep "^-$OID_REGEX " boundary ' test_expect_success 'prerequisites with an empty commit message' ' @@ -77,4 +83,15 @@ test_expect_success 'failed bundle creation does not leave cruft' ' test_path_is_missing fail.bundle.lock ' +test_expect_success 'fetch SHA-1 from bundle' ' + test_create_repo foo && + test_commit -C foo x && + git -C foo bundle create tip.bundle -1 master && + git -C foo rev-parse HEAD >hash && + + # Exercise to ensure that fetching a SHA-1 from a bundle works with no + # errors + git fetch --no-tags foo/tip.bundle "$(cat hash)" +' + test_done diff --git a/t/t5608-clone-2gb.sh b/t/t5608-clone-2gb.sh index 2c6bc07..eee0842 100755 --- a/t/t5608-clone-2gb.sh +++ b/t/t5608-clone-2gb.sh @@ -3,7 +3,7 @@ test_description='Test cloning a repository larger than 2 gigabyte' . ./test-lib.sh -if test -z "$GIT_TEST_CLONE_2GB" +if ! test_bool_env GIT_TEST_CLONE_2GB false then say 'Skipping expensive 2GB clone test; enable it with GIT_TEST_CLONE_2GB=t' else diff --git a/t/t5611-clone-config.sh b/t/t5611-clone-config.sh index 39329eb..60c1ba9 100755 --- a/t/t5611-clone-config.sh +++ b/t/t5611-clone-config.sh @@ -45,6 +45,53 @@ test_expect_success 'clone -c config is available during clone' ' test_cmp expect child/file ' +test_expect_success 'clone -c remote.origin.fetch=<refspec> works' ' + rm -rf child && + git update-ref refs/grab/it refs/heads/master && + git update-ref refs/leave/out refs/heads/master && + git clone -c "remote.origin.fetch=+refs/grab/*:refs/grab/*" . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/origin/HEAD + refs/remotes/origin/master + EOF + test_cmp expect actual +' + +test_expect_success 'git -c remote.origin.fetch=<refspec> clone works' ' + rm -rf child && + git -c "remote.origin.fetch=+refs/grab/*:refs/grab/*" clone . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/origin/HEAD + refs/remotes/origin/master + EOF + test_cmp expect actual +' + +test_expect_success 'clone -c remote.<remote>.fetch=<refspec> --origin=<name>' ' + rm -rf child && + git clone --origin=upstream \ + -c "remote.upstream.fetch=+refs/grab/*:refs/grab/*" \ + -c "remote.origin.fetch=+refs/leave/*:refs/leave/*" \ + . child && + git -C child for-each-ref --format="%(refname)" >actual && + + cat >expect <<-\EOF && + refs/grab/it + refs/heads/master + refs/remotes/upstream/HEAD + refs/remotes/upstream/master + EOF + test_cmp expect actual +' + # Tests for the hidden file attribute on windows is_hidden () { # Use the output of `attrib`, ignore the absolute path diff --git a/t/t5616-partial-clone.sh b/t/t5616-partial-clone.sh index 336f02a..77bb91e 100755 --- a/t/t5616-partial-clone.sh +++ b/t/t5616-partial-clone.sh @@ -42,8 +42,16 @@ test_expect_success 'do partial clone 1' ' test_cmp expect_1.oids observed.oids && test "$(git -C pc1 config --local core.repositoryformatversion)" = "1" && - test "$(git -C pc1 config --local extensions.partialclone)" = "origin" && - test "$(git -C pc1 config --local core.partialclonefilter)" = "blob:none" + test "$(git -C pc1 config --local remote.origin.promisor)" = "true" && + test "$(git -C pc1 config --local remote.origin.partialclonefilter)" = "blob:none" +' + +test_expect_success 'verify that .promisor file contains refs fetched' ' + ls pc1/.git/objects/pack/pack-*.promisor >promisorlist && + test_line_count = 1 promisorlist && + git -C srv.bare rev-list HEAD >headhash && + grep "$(cat headhash) HEAD" $(cat promisorlist) && + grep "$(cat headhash) refs/heads/master" $(cat promisorlist) ' # checkout master to force dynamic object fetch of blobs at HEAD. @@ -208,6 +216,25 @@ test_expect_success 'use fsck before and after manually fetching a missing subtr test_cmp unique_types.expected unique_types.observed ' +test_expect_success 'implicitly construct combine: filter with repeated flags' ' + GIT_TRACE=$(pwd)/trace git clone --bare \ + --filter=blob:none --filter=tree:1 \ + "file://$(pwd)/srv.bare" pc2 && + grep "trace:.* git pack-objects .*--filter=combine:blob:none+tree:1" \ + trace && + git -C pc2 rev-list --objects --missing=allow-any HEAD >objects && + + # We should have gotten some root trees. + grep " $" objects && + # Should not have gotten any non-root trees or blobs. + ! grep " ." objects && + + xargs -n 1 git -C pc2 cat-file -t <objects >types && + sort -u types >unique_types.actual && + test_write_lines commit tree >unique_types.expected && + test_cmp unique_types.expected unique_types.actual +' + test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' ' rm -rf src dst && git init src && @@ -241,14 +268,179 @@ test_expect_success 'fetch what is specified on CLI even if already promised' ' ! grep "?$(cat blob)" missing_after ' +test_expect_success 'setup src repo for sparse filter' ' + git init sparse-src && + git -C sparse-src config --local uploadpack.allowfilter 1 && + git -C sparse-src config --local uploadpack.allowanysha1inwant 1 && + test_commit -C sparse-src one && + test_commit -C sparse-src two && + echo /one.t >sparse-src/only-one && + git -C sparse-src add . && + git -C sparse-src commit -m "add sparse checkout files" +' + +test_expect_success 'partial clone with sparse filter succeeds' ' + rm -rf dst.git && + git clone --no-local --bare \ + --filter=sparse:oid=master:only-one \ + sparse-src dst.git && + ( + cd dst.git && + git rev-list --objects --missing=print HEAD >out && + grep "^$(git rev-parse HEAD:one.t)" out && + grep "^?$(git rev-parse HEAD:two.t)" out + ) +' + +test_expect_success 'partial clone with unresolvable sparse filter fails cleanly' ' + rm -rf dst.git && + test_must_fail git clone --no-local --bare \ + --filter=sparse:oid=master:no-such-name \ + sparse-src dst.git 2>err && + test_i18ngrep "unable to access sparse blob in .master:no-such-name" err && + test_must_fail git clone --no-local --bare \ + --filter=sparse:oid=master \ + sparse-src dst.git 2>err && + test_i18ngrep "unable to parse sparse filter data in" err +' + +setup_triangle () { + rm -rf big-blob.txt server client promisor-remote && + + printf "line %d\n" $(test_seq 1 100) >big-blob.txt && + + # Create a server with 2 commits: a commit with a big tree and a child + # commit with an incremental change. Also, create a partial clone + # client that only contains the first commit. + git init server && + git -C server config --local uploadpack.allowfilter 1 && + for i in $(test_seq 1 100) + do + echo "make the tree big" >server/file$i && + git -C server add file$i + done && + git -C server commit -m "initial" && + git clone --bare --filter=tree:0 "file://$(pwd)/server" client && + echo another line >>server/file1 && + git -C server commit -am "incremental change" && + + # Create a promisor remote that only contains the tree and blob from + # the first commit. + git init promisor-remote && + git -C server config --local uploadpack.allowanysha1inwant 1 && + TREE_HASH=$(git -C server rev-parse HEAD~1^{tree}) && + git -C promisor-remote fetch --keep "file://$(pwd)/server" "$TREE_HASH" && + git -C promisor-remote count-objects -v >object-count && + test_i18ngrep "count: 0" object-count && + test_i18ngrep "in-pack: 2" object-count && + + # Set it as the promisor remote of client. Thus, whenever + # the client lazy fetches, the lazy fetch will succeed only if it is + # for this tree or blob. + test_commit -C promisor-remote one && # so that ref advertisement is not empty + git -C promisor-remote config --local uploadpack.allowanysha1inwant 1 && + git -C client remote set-url origin "file://$(pwd)/promisor-remote" +} + +# NEEDSWORK: The tests beginning with "fetch lazy-fetches" below only +# test that "fetch" avoid fetching trees and blobs, but not commits or +# tags. Revisit this if Git is ever taught to support partial clones +# with commits and/or tags filtered out. + +test_expect_success 'fetch lazy-fetches only to resolve deltas' ' + setup_triangle && + + # Exercise to make sure it works. Git will not fetch anything from the + # promisor remote other than for the big tree (because it needs to + # resolve the delta). + GIT_TRACE_PACKET="$(pwd)/trace" git -C client \ + fetch "file://$(pwd)/server" master && + + # Verify the assumption that the client needed to fetch the delta base + # to resolve the delta. + git -C server rev-parse HEAD~1^{tree} >hash && + grep "want $(cat hash)" trace +' + +test_expect_success 'fetch lazy-fetches only to resolve deltas, protocol v2' ' + setup_triangle && + + git -C server config --local protocol.version 2 && + git -C client config --local protocol.version 2 && + git -C promisor-remote config --local protocol.version 2 && + + # Exercise to make sure it works. Git will not fetch anything from the + # promisor remote other than for the big blob (because it needs to + # resolve the delta). + GIT_TRACE_PACKET="$(pwd)/trace" git -C client \ + fetch "file://$(pwd)/server" master && + + # Verify that protocol version 2 was used. + grep "fetch< version 2" trace && + + # Verify the assumption that the client needed to fetch the delta base + # to resolve the delta. + git -C server rev-parse HEAD~1^{tree} >hash && + grep "want $(cat hash)" trace +' + +# The following two tests must be in this order, or else +# the first will not fail. It is important that the srv.bare +# repository did not have tags during clone, but has tags +# in the fetch. + +test_expect_failure 'verify fetch succeeds when asking for new tags' ' + git clone --filter=blob:none "file://$(pwd)/srv.bare" tag-test && + for i in I J K + do + test_commit -C src $i && + git -C src branch $i || return 1 + done && + git -C srv.bare fetch --tags origin +refs/heads/*:refs/heads/* && + git -C tag-test -c protocol.version=2 fetch --tags origin +' + +test_expect_success 'verify fetch downloads only one pack when updating refs' ' + git clone --filter=blob:none "file://$(pwd)/srv.bare" pack-test && + ls pack-test/.git/objects/pack/*pack >pack-list && + test_line_count = 2 pack-list && + for i in A B C + do + test_commit -C src $i && + git -C src branch $i || return 1 + done && + git -C srv.bare fetch origin +refs/heads/*:refs/heads/* && + git -C pack-test fetch origin && + ls pack-test/.git/objects/pack/*pack >pack-list && + test_line_count = 3 pack-list +' + . "$TEST_DIRECTORY"/lib-httpd.sh start_httpd -# Converts bytes into a form suitable for inclusion in a sed command. For -# example, "printf 'ab\r\n' | hex_unpack" results in '\x61\x62\x0d\x0a'. -sed_escape () { - perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' | - sed 's/\(..\)/\\x\1/g' +# Converts bytes into their hexadecimal representation. For example, +# "printf 'ab\r\n' | hex_unpack" results in '61620d0a'. +hex_unpack () { + perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' +} + +# Inserts $1 at the start of the string and every 2 characters thereafter. +intersperse () { + sed 's/\(..\)/'$1'\1/g' +} + +# Create a one-time-perl command to replace the existing packfile with $1. +replace_packfile () { + # The protocol requires that the packfile be sent in sideband 1, hence + # the extra \x01 byte at the beginning. + cp $1 "$HTTPD_ROOT_PATH/one-time-pack" && + echo 'if (/packfile/) { + print; + my $length = -s "one-time-pack"; + printf "%04x\x01", $length + 5; + print `cat one-time-pack` . "0000"; + last + }' >"$HTTPD_ROOT_PATH/one-time-perl" } test_expect_success 'upon cloning, check that all refs point to objects' ' @@ -270,21 +462,18 @@ test_expect_success 'upon cloning, check that all refs point to objects' ' # Replace the existing packfile with the crafted one. The protocol # requires that the packfile be sent in sideband 1, hence the extra # \x01 byte at the beginning. - printf "1,/packfile/!c %04x\\\\x01%s0000" \ - "$(($(wc -c <incomplete.pack) + 5))" \ - "$(sed_escape <incomplete.pack)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + replace_packfile incomplete.pack && - # Use protocol v2 because the sed command looks for the "packfile" + # Use protocol v2 because the perl command looks for the "packfile" # section header. test_config -C "$SERVER" protocol.version 2 && test_must_fail git -c protocol.version=2 clone \ - --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2>err && + --filter=blob:none $HTTPD_URL/one_time_perl/server repo 2>err && - grep "did not send all necessary objects" err && + test_i18ngrep "did not send all necessary objects" err && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" ' test_expect_success 'when partial cloning, tolerate server not sending target of tag' ' @@ -313,24 +502,100 @@ test_expect_success 'when partial cloning, tolerate server not sending target of # Replace the existing packfile with the crafted one. The protocol # requires that the packfile be sent in sideband 1, hence the extra # \x01 byte at the beginning. - printf "1,/packfile/!c %04x\\\\x01%s0000" \ - "$(($(wc -c <incomplete.pack) + 5))" \ - "$(sed_escape <incomplete.pack)" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + replace_packfile incomplete.pack && - # Use protocol v2 because the sed command looks for the "packfile" + # Use protocol v2 because the perl command looks for the "packfile" # section header. test_config -C "$SERVER" protocol.version 2 && # Exercise to make sure it works. git -c protocol.version=2 clone \ - --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2> err && + --filter=blob:none $HTTPD_URL/one_time_perl/server repo 2> err && ! grep "missing object referenced by" err && - # Ensure that the one-time-sed script was used. - ! test -e "$HTTPD_ROOT_PATH/one-time-sed" + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" +' + +test_expect_success 'tolerate server sending REF_DELTA against missing promisor objects' ' + SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" && + rm -rf "$SERVER" repo && + test_create_repo "$SERVER" && + test_config -C "$SERVER" uploadpack.allowfilter 1 && + test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 && + + # Create a commit with 2 blobs to be used as delta bases. + for i in $(test_seq 10) + do + echo "this is a line" >>"$SERVER/foo.txt" && + echo "this is another line" >>"$SERVER/have.txt" + done && + git -C "$SERVER" add foo.txt have.txt && + git -C "$SERVER" commit -m bar && + git -C "$SERVER" rev-parse HEAD:foo.txt >deltabase_missing && + git -C "$SERVER" rev-parse HEAD:have.txt >deltabase_have && + + # Clone. The client has deltabase_have but not deltabase_missing. + git -c protocol.version=2 clone --no-checkout \ + --filter=blob:none $HTTPD_URL/one_time_perl/server repo && + git -C repo hash-object -w -- "$SERVER/have.txt" && + + # Sanity check to ensure that the client does not have + # deltabase_missing. + git -C repo rev-list --objects --ignore-missing \ + -- $(cat deltabase_missing) >objlist && + test_line_count = 0 objlist && + + # Another commit. This commit will be fetched by the client. + echo "abcdefghijklmnopqrstuvwxyz" >>"$SERVER/foo.txt" && + echo "abcdefghijklmnopqrstuvwxyz" >>"$SERVER/have.txt" && + git -C "$SERVER" add foo.txt have.txt && + git -C "$SERVER" commit -m baz && + + # Pack a thin pack containing, among other things, HEAD:foo.txt + # delta-ed against HEAD^:foo.txt and HEAD:have.txt delta-ed against + # HEAD^:have.txt. + printf "%s\n--not\n%s\n" \ + $(git -C "$SERVER" rev-parse HEAD) \ + $(git -C "$SERVER" rev-parse HEAD^) | + git -C "$SERVER" pack-objects --thin --stdout >thin.pack && + + # Ensure that the pack contains one delta against HEAD^:foo.txt. Since + # the delta contains at least 26 novel characters, the size cannot be + # contained in 4 bits, so the object header will take up 2 bytes. The + # most significant nybble of the first byte is 0b1111 (0b1 to indicate + # that the header continues, and 0b111 to indicate REF_DELTA), followed + # by any 3 nybbles, then the OID of the delta base. + printf "f.,..%s" $(intersperse "," <deltabase_missing) >want && + hex_unpack <thin.pack | intersperse "," >have && + grep $(cat want) have && + + # Ensure that the pack contains one delta against HEAD^:have.txt, + # similar to the above. + printf "f.,..%s" $(intersperse "," <deltabase_have) >want && + hex_unpack <thin.pack | intersperse "," >have && + grep $(cat want) have && + + replace_packfile thin.pack && + + # Use protocol v2 because the perl command looks for the "packfile" + # section header. + test_config -C "$SERVER" protocol.version 2 && + + # Fetch the thin pack and ensure that index-pack is able to handle the + # REF_DELTA object with a missing promisor delta base. + GIT_TRACE_PACKET="$(pwd)/trace" git -C repo -c protocol.version=2 fetch && + + # Ensure that the missing delta base was directly fetched, but not the + # one that the client has. + grep "want $(cat deltabase_missing)" trace && + ! grep "want $(cat deltabase_have)" trace && + + # Ensure that the one-time-perl script was used. + ! test -e "$HTTPD_ROOT_PATH/one-time-perl" ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5617-clone-submodules-remote.sh b/t/t5617-clone-submodules-remote.sh new file mode 100755 index 0000000..1a041df --- /dev/null +++ b/t/t5617-clone-submodules-remote.sh @@ -0,0 +1,65 @@ +#!/bin/sh + +test_description='Test cloning repos with submodules using remote-tracking branches' + +. ./test-lib.sh + +pwd=$(pwd) + +test_expect_success 'setup' ' + git checkout -b master && + test_commit commit1 && + mkdir sub && + ( + cd sub && + git init && + test_commit subcommit1 && + git tag sub_when_added_to_super && + git branch other + ) && + git submodule add "file://$pwd/sub" sub && + git commit -m "add submodule" && + ( + cd sub && + test_commit subcommit2 + ) +' + +test_expect_success 'clone with --no-remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --no-remote-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code sub_when_added_to_super + ) +' + +test_expect_success 'clone with --remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --remote-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code remotes/origin/master + ) +' + +test_expect_success 'check the default is --no-remote-submodules' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git diff --exit-code sub_when_added_to_super + ) +' + +test_expect_success 'clone with --single-branch' ' + test_when_finished "rm -rf super_clone" && + git clone --recurse-submodules --single-branch "file://$pwd/." super_clone && + ( + cd super_clone/sub && + git rev-parse --verify origin/master && + test_must_fail git rev-parse --verify origin/other + ) +' + +test_done diff --git a/t/t5618-alternate-refs.sh b/t/t5618-alternate-refs.sh new file mode 100755 index 0000000..3353216 --- /dev/null +++ b/t/t5618-alternate-refs.sh @@ -0,0 +1,60 @@ +#!/bin/sh + +test_description='test handling of --alternate-refs traversal' +. ./test-lib.sh + +# Avoid test_commit because we want a specific and known set of refs: +# +# base -- one +# \ \ +# two -- merged +# +# where "one" and "two" are on separate refs, and "merged" is available only in +# the dependent child repository. +test_expect_success 'set up local refs' ' + git checkout -b one && + test_tick && + git commit --allow-empty -m base && + test_tick && + git commit --allow-empty -m one && + git checkout -b two HEAD^ && + test_tick && + git commit --allow-empty -m two +' + +# We'll enter the child repository after it's set up since that's where +# all of the subsequent tests will want to run (and it's easy to forget a +# "-C child" and get nonsense results). +test_expect_success 'set up shared clone' ' + git clone -s . child && + cd child && + git merge origin/one +' + +test_expect_success 'rev-list --alternate-refs' ' + git rev-list --remotes=origin >expect && + git rev-list --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'rev-list --not --alternate-refs' ' + git rev-parse HEAD >expect && + git rev-list HEAD --not --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'limiting with alternateRefsPrefixes' ' + test_config core.alternateRefsPrefixes refs/heads/one && + git rev-list origin/one >expect && + git rev-list --alternate-refs >actual && + test_cmp expect actual +' + +test_expect_success 'log --source shows .alternate marker' ' + git log --oneline --source --remotes=origin >expect.orig && + sed "s/origin.* /.alternate /" <expect.orig >expect && + git log --oneline --source --alternate-refs >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t5700-protocol-v1.sh b/t/t5700-protocol-v1.sh index ba86a44..022901b 100755 --- a/t/t5700-protocol-v1.sh +++ b/t/t5700-protocol-v1.sh @@ -4,6 +4,10 @@ test_description='test git wire-protocol transition' TEST_NO_CREATE_REPO=1 +# This is a protocol-specific test. +GIT_TEST_PROTOCOL_VERSION=0 +export GIT_TEST_PROTOCOL_VERSION + . ./test-lib.sh # Test protocol v1 with 'git://' transport @@ -289,6 +293,7 @@ test_expect_success 'push with http:// using protocol v1' ' grep "git< version 1" log ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5701-git-serve.sh b/t/t5701-git-serve.sh index ae79c6b..ffb9613 100755 --- a/t/t5701-git-serve.sh +++ b/t/t5701-git-serve.sh @@ -1,6 +1,6 @@ #!/bin/sh -test_description='test git-serve and server commands' +test_description='test protocol v2 server commands' . ./test-lib.sh @@ -14,7 +14,8 @@ test_expect_success 'test capability advertisement' ' 0000 EOF - git serve --advertise-capabilities >out && + GIT_TEST_SIDEBAND_ALL=0 test-tool serve-v2 \ + --advertise-capabilities >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -24,11 +25,11 @@ test_expect_success 'stateless-rpc flag does not list capabilities' ' test-tool pkt-line pack >in <<-EOF && 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && test_must_be_empty out && # EOF - git serve --stateless-rpc >out && + test-tool serve-v2 --stateless-rpc >out && test_must_be_empty out ' @@ -37,7 +38,7 @@ test_expect_success 'request invalid capability' ' foobar 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "unknown capability" err ' @@ -46,7 +47,7 @@ test_expect_success 'request with no command' ' agent=git/test 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "no command requested" err ' @@ -56,7 +57,7 @@ test_expect_success 'request invalid command' ' agent=git/test 0000 EOF - test_must_fail git serve --stateless-rpc 2>err <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>err <in && test_i18ngrep "invalid command" err ' @@ -87,7 +88,7 @@ test_expect_success 'basics of ls-refs' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -107,7 +108,7 @@ test_expect_success 'basic ref-prefixes' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -127,7 +128,7 @@ test_expect_success 'refs/heads prefix' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -148,7 +149,7 @@ test_expect_success 'peel parameter' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -169,7 +170,7 @@ test_expect_success 'symrefs parameter' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -189,7 +190,7 @@ test_expect_success 'sending server-options' ' 0000 EOF - git serve --stateless-rpc <in >out && + test-tool serve-v2 --stateless-rpc <in >out && test-tool pkt-line unpack <out >actual && test_cmp expect actual ' @@ -204,7 +205,10 @@ test_expect_success 'unexpected lines are not allowed in fetch request' ' 0000 EOF - test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + ( + cd server && + test_must_fail test-tool serve-v2 --stateless-rpc + ) <in >/dev/null 2>err && grep "unexpected line: .this-is-not-a-command." err ' diff --git a/t/t5702-protocol-v2.sh b/t/t5702-protocol-v2.sh index 0f2b09e..5039e66 100755 --- a/t/t5702-protocol-v2.sh +++ b/t/t5702-protocol-v2.sh @@ -32,7 +32,7 @@ test_expect_success 'list refs with git:// using protocol v2' ' test_cmp expect actual ' -test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' +test_expect_success 'ref advertisement is filtered with ls-remote using protocol v2' ' test_when_finished "rm -f log" && GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ @@ -154,7 +154,7 @@ test_expect_success 'list refs with file:// using protocol v2' ' test_cmp expect actual ' -test_expect_success 'ref advertisment is filtered with ls-remote using protocol v2' ' +test_expect_success 'ref advertisement is filtered with ls-remote using protocol v2' ' test_when_finished "rm -f log" && GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ @@ -182,6 +182,13 @@ test_expect_success 'server-options are sent when using ls-remote' ' grep "server-option=world" log ' +test_expect_success 'warn if using server-option with ls-remote with legacy protocol' ' + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -c protocol.version=0 \ + ls-remote -o hello -o world "file://$(pwd)/file_parent" master 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' test_expect_success 'clone with file:// using protocol v2' ' test_when_finished "rm -f log" && @@ -218,7 +225,7 @@ test_expect_success 'fetch with file:// using protocol v2' ' grep "fetch< version 2" log ' -test_expect_success 'ref advertisment is filtered during fetch using protocol v2' ' +test_expect_success 'ref advertisement is filtered during fetch using protocol v2' ' test_when_finished "rm -f log" && test_commit -C file_parent three && @@ -251,6 +258,40 @@ test_expect_success 'server-options are sent when fetching' ' grep "server-option=world" log ' +test_expect_success 'warn if using server-option with fetch with legacy protocol' ' + test_when_finished "rm -rf temp_child" && + + git init temp_child && + + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -C temp_child -c protocol.version=0 \ + fetch -o hello -o world "file://$(pwd)/file_parent" master 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' + +test_expect_success 'server-options are sent when cloning' ' + test_when_finished "rm -rf log myclone" && + + GIT_TRACE_PACKET="$(pwd)/log" git -c protocol.version=2 \ + clone --server-option=hello --server-option=world \ + "file://$(pwd)/file_parent" myclone && + + grep "server-option=hello" log && + grep "server-option=world" log +' + +test_expect_success 'warn if using server-option with clone with legacy protocol' ' + test_when_finished "rm -rf myclone" && + + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 git -c protocol.version=0 \ + clone --server-option=hello --server-option=world \ + "file://$(pwd)/file_parent" myclone 2>err && + + test_i18ngrep "see protocol.version in" err && + test_i18ngrep "server options require protocol version 2 or later" err +' + test_expect_success 'upload-pack respects config using protocol v2' ' git init server && write_script server/.git/hook <<-\EOF && @@ -359,12 +400,13 @@ test_expect_success 'even with handcrafted request, filter does not work if not 0000 EOF - test_must_fail git -C server serve --stateless-rpc <in >/dev/null 2>err && + test_must_fail test-tool -C server serve-v2 --stateless-rpc \ + <in >/dev/null 2>err && grep "unexpected line: .filter blob:none." err && # Exercise to ensure that if advertised, filter works git -C server config uploadpack.allowfilter 1 && - git -C server serve --stateless-rpc <in >/dev/null + test-tool -C server serve-v2 --stateless-rpc <in >/dev/null ' test_expect_success 'default refspec is used to filter ref when fetchcing' ' @@ -457,10 +499,7 @@ test_expect_success 'upload-pack respects client shallows' ' # Add extra commits to the client so that the whole fetch takes more # than 1 request (due to negotiation) - for i in $(test_seq 1 32) - do - test_commit -C client c$i - done && + test_commit_bulk -C client --id=c 32 && git -C server checkout -b newbranch base && test_commit -C server client_wants && @@ -471,6 +510,53 @@ test_expect_success 'upload-pack respects client shallows' ' grep "fetch< version 2" trace ' +test_expect_success 'ensure that multiple fetches in same process from a shallow repo works' ' + rm -rf server client trace && + + test_create_repo server && + test_commit -C server one && + test_commit -C server two && + test_commit -C server three && + git clone --shallow-exclude two "file://$(pwd)/server" client && + + git -C server tag -a -m "an annotated tag" twotag two && + + # Triggers tag following (thus, 2 fetches in one process) + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --shallow-exclude one origin && + # Ensure that protocol v2 is used + grep "fetch< version 2" trace +' + +test_expect_success 'deepen-relative' ' + rm -rf server client trace && + + test_create_repo server && + test_commit -C server one && + test_commit -C server two && + test_commit -C server three && + git clone --depth 1 "file://$(pwd)/server" client && + test_commit -C server four && + + # Sanity check that only "three" is downloaded + git -C client log --pretty=tformat:%s master >actual && + echo three >expected && + test_cmp expected actual && + + GIT_TRACE_PACKET="$(pwd)/trace" git -C client -c protocol.version=2 \ + fetch --deepen=1 origin && + # Ensure that protocol v2 is used + grep "fetch< version 2" trace && + + git -C client log --pretty=tformat:%s origin/master >actual && + cat >expected <<-\EOF && + four + three + two + EOF + test_cmp expected actual +' + # Test protocol v2 with 'http://' transport # . "$TEST_DIRECTORY"/lib-httpd.sh @@ -495,7 +581,38 @@ test_expect_success 'clone with http:// using protocol v2' ' # Client requested to use protocol v2 grep "Git-Protocol: version=2" log && # Server responded using protocol v2 - grep "git< version 2" log + grep "git< version 2" log && + # Verify that the chunked encoding sending codepath is NOT exercised + ! grep "Send header: Transfer-Encoding: chunked" log +' + +test_expect_success 'clone big repository with http:// using protocol v2' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/big" && + # Ensure that the list of wants is greater than http.postbuffer below + for i in $(test_seq 1 1500) + do + # do not use here-doc, because it requires a process + # per loop iteration + echo "commit refs/heads/too-many-refs-$i" && + echo "committer git <git@example.com> $i +0000" && + echo "data 0" && + echo "M 644 inline bla.txt" && + echo "data 4" && + echo "bla" + done | git -C "$HTTPD_DOCUMENT_ROOT_PATH/big" fast-import && + + GIT_TRACE_PACKET="$(pwd)/log" GIT_TRACE_CURL="$(pwd)/log" git \ + -c protocol.version=2 -c http.postbuffer=65536 \ + clone "$HTTPD_URL/smart/big" big_child && + + # Client requested to use protocol v2 + grep "Git-Protocol: version=2" log && + # Server responded using protocol v2 + grep "git< version 2" log && + # Verify that the chunked encoding sending codepath is exercised + grep "Send header: Transfer-Encoding: chunked" log ' test_expect_success 'fetch with http:// using protocol v2' ' @@ -514,6 +631,52 @@ test_expect_success 'fetch with http:// using protocol v2' ' grep "git< version 2" log ' +test_expect_success 'fetch with http:// by hash without tag following with protocol v2 does not list refs' ' + test_when_finished "rm -f log" && + + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" two_a && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" rev-parse two_a >two_a_hash && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch --no-tags origin $(cat two_a_hash) && + + grep "fetch< version 2" log && + ! grep "fetch> command=ls-refs" log +' + +test_expect_success 'fetch from namespaced repo respects namespaces' ' + test_when_finished "rm -f log" && + + git init "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" one && + test_commit -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" two && + git -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" \ + update-ref refs/namespaces/ns/refs/heads/master one && + + GIT_TRACE_PACKET="$(pwd)/log" git -C http_child -c protocol.version=2 \ + fetch "$HTTPD_URL/smart_namespace/nsrepo" \ + refs/heads/master:refs/heads/theirs && + + # Server responded using protocol v2 + grep "fetch< version 2" log && + + git -C "$HTTPD_DOCUMENT_ROOT_PATH/nsrepo" rev-parse one >expect && + git -C http_child rev-parse theirs >actual && + test_cmp expect actual +' + +test_expect_success 'ls-remote with v2 http sends only one POST' ' + test_when_finished "rm -f log" && + + git ls-remote "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" >expect && + GIT_TRACE_CURL="$(pwd)/log" git -c protocol.version=2 \ + ls-remote "$HTTPD_URL/smart/http_parent" >actual && + test_cmp expect actual && + + grep "Send header: POST" log >posts && + test_line_count = 1 posts +' + test_expect_success 'push with http:// and a config of v2 does not request v2' ' test_when_finished "rm -f log" && # Till v2 for push is designed, make sure that if a client has @@ -531,9 +694,9 @@ test_expect_success 'push with http:// and a config of v2 does not request v2' ' git -C "$HTTPD_DOCUMENT_ROOT_PATH/http_parent" log -1 --format=%s client_branch >expect && test_cmp expect actual && - # Client didnt request to use protocol v2 + # Client did not request to use protocol v2 ! grep "Git-Protocol: version=2" log && - # Server didnt respond using protocol v2 + # Server did not respond using protocol v2 ! grep "git< version 2" log ' @@ -549,11 +712,11 @@ test_expect_success 'when server sends "ready", expect DELIM' ' # After "ready" in the acknowledgments section, pretend that a FLUSH # (0000) was sent instead of a DELIM (0001). - printf "/ready/,$ s/0001/0000/" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + printf "\$ready = 1 if /ready/; \$ready && s/0001/0000/" \ + >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail git -C http_child -c protocol.version=2 \ - fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && + fetch "$HTTPD_URL/one_time_perl/http_parent" 2> err && test_i18ngrep "expected packfile to be sent after .ready." err ' @@ -570,24 +733,22 @@ test_expect_success 'when server does not send "ready", expect FLUSH' ' # Create many commits to extend the negotiation phase across multiple # requests, so that the server does not send "ready" in the first # request. - for i in $(test_seq 1 32) - do - test_commit -C http_child c$i - done && + test_commit_bulk -C http_child --id=c 32 && # After the acknowledgments section, pretend that a DELIM # (0001) was sent instead of a FLUSH (0000). - printf "/acknowledgments/,$ s/0000/0001/" \ - >"$HTTPD_ROOT_PATH/one-time-sed" && + printf "\$ack = 1 if /acknowledgments/; \$ack && s/0000/0001/" \ + >"$HTTPD_ROOT_PATH/one-time-perl" && test_must_fail env GIT_TRACE_PACKET="$(pwd)/log" git -C http_child \ -c protocol.version=2 \ - fetch "$HTTPD_URL/one_time_sed/http_parent" 2> err && - grep "fetch< acknowledgments" log && - ! grep "fetch< ready" log && + fetch "$HTTPD_URL/one_time_perl/http_parent" 2> err && + grep "fetch< .*acknowledgments" log && + ! grep "fetch< .*ready" log && test_i18ngrep "expected no other sections to be sent after no .ready." err ' -stop_httpd +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. test_done diff --git a/t/t5703-upload-pack-ref-in-want.sh b/t/t5703-upload-pack-ref-in-want.sh index 3f58f05..7fba306 100755 --- a/t/t5703-upload-pack-ref-in-want.sh +++ b/t/t5703-upload-pack-ref-in-want.sh @@ -18,14 +18,16 @@ get_actual_commits () { p }' <out | test-tool pkt-line unpack-sideband >o.pack && git index-pack o.pack && - git verify-pack -v o.idx | grep commit | cut -c-40 | sort >actual_commits + git verify-pack -v o.idx >objs && + grep commit objs | cut -d" " -f1 | sort >actual_commits } check_output () { get_actual_refs && test_cmp expected_refs actual_refs && get_actual_commits && - test_cmp expected_commits actual_commits + sort expected_commits >sorted_commits && + test_cmp sorted_commits actual_commits } # c(o/foo) d(o/bar) @@ -35,6 +37,7 @@ check_output () { # \ | / # a test_expect_success 'setup repository' ' + test_oid_init && test_commit a && git checkout -b o/foo && test_commit b && @@ -48,15 +51,15 @@ test_expect_success 'setup repository' ' ' test_expect_success 'config controls ref-in-want advertisement' ' - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && ! grep -a ref-in-want out && git config uploadpack.allowRefInWant false && - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && ! grep -a ref-in-want out && git config uploadpack.allowRefInWant true && - git serve --advertise-capabilities >out && + test-tool serve-v2 --advertise-capabilities >out && grep -a ref-in-want out ' @@ -70,57 +73,63 @@ test_expect_success 'invalid want-ref line' ' 0000 EOF - test_must_fail git serve --stateless-rpc 2>out <in && + test_must_fail test-tool serve-v2 --stateless-rpc 2>out <in && grep "unknown ref" out ' test_expect_success 'basic want-ref' ' + oid=$(git rev-parse f) && cat >expected_refs <<-EOF && - $(git rev-parse f) refs/heads/master + $oid refs/heads/master EOF - git rev-parse f | sort >expected_commits && + git rev-parse f >expected_commits && + oid=$(git rev-parse a) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/master - have $(git rev-parse a) + have $oid done 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' test_expect_success 'multiple want-ref lines' ' + oid_c=$(git rev-parse c) && + oid_d=$(git rev-parse d) && cat >expected_refs <<-EOF && - $(git rev-parse c) refs/heads/o/foo - $(git rev-parse d) refs/heads/o/bar + $oid_c refs/heads/o/foo + $oid_d refs/heads/o/bar EOF - git rev-parse c d | sort >expected_commits && + git rev-parse c d >expected_commits && + oid=$(git rev-parse b) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/o/foo want-ref refs/heads/o/bar - have $(git rev-parse b) + have $oid done 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' test_expect_success 'mix want and want-ref' ' + oid=$(git rev-parse f) && cat >expected_refs <<-EOF && - $(git rev-parse f) refs/heads/master + $oid refs/heads/master EOF - git rev-parse e f | sort >expected_commits && + git rev-parse e f >expected_commits && test-tool pkt-line pack >in <<-EOF && command=fetch @@ -133,132 +142,32 @@ test_expect_success 'mix want and want-ref' ' 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' test_expect_success 'want-ref with ref we already have commit for' ' + oid=$(git rev-parse c) && cat >expected_refs <<-EOF && - $(git rev-parse c) refs/heads/o/foo + $oid refs/heads/o/foo EOF >expected_commits && + oid=$(git rev-parse c) && test-tool pkt-line pack >in <<-EOF && command=fetch 0001 no-progress want-ref refs/heads/o/foo - have $(git rev-parse c) + have $oid done 0000 EOF - git serve --stateless-rpc >out <in && + test-tool serve-v2 --stateless-rpc >out <in && check_output ' -. "$TEST_DIRECTORY"/lib-httpd.sh -start_httpd - -REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" -LOCAL_PRISTINE="$(pwd)/local_pristine" - -test_expect_success 'setup repos for change-while-negotiating test' ' - ( - git init "$REPO" && - cd "$REPO" && - >.git/git-daemon-export-ok && - test_commit m1 && - git tag -d m1 && - - # Local repo with many commits (so that negotiation will take - # more than 1 request/response pair) - git clone "http://127.0.0.1:$LIB_HTTPD_PORT/smart/repo" "$LOCAL_PRISTINE" && - cd "$LOCAL_PRISTINE" && - git checkout -b side && - for i in $(test_seq 1 33); do test_commit s$i; done && - - # Add novel commits to upstream - git checkout master && - cd "$REPO" && - test_commit m2 && - test_commit m3 && - git tag -d m2 m3 - ) && - git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_sed/repo" && - git -C "$LOCAL_PRISTINE" config protocol.version 2 -' - -inconsistency () { - # Simulate that the server initially reports $2 as the ref - # corresponding to $1, and after that, $1 as the ref corresponding to - # $1. This corresponds to the real-life situation where the server's - # repository appears to change during negotiation, for example, when - # different servers in a load-balancing arrangement serve (stateless) - # RPCs during a single negotiation. - printf "s/%s/%s/" \ - $(git -C "$REPO" rev-parse $1 | tr -d "\n") \ - $(git -C "$REPO" rev-parse $2 | tr -d "\n") \ - >"$HTTPD_ROOT_PATH/one-time-sed" -} - -test_expect_success 'server is initially ahead - no ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant false && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && - test_must_fail git -C local fetch 2>err && - grep "ERR upload-pack: not our ref" err -' - -test_expect_success 'server is initially ahead - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master 1234567890123456789012345678901234567890 && - git -C local fetch && - - git -C "$REPO" rev-parse --verify master >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server is initially behind - no ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant false && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master "master^" && - git -C local fetch && - - git -C "$REPO" rev-parse --verify "master^" >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server is initially behind - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - inconsistency master "master^" && - git -C local fetch && - - git -C "$REPO" rev-parse --verify "master" >expected && - git -C local rev-parse --verify refs/remotes/origin/master >actual && - test_cmp expected actual -' - -test_expect_success 'server loses a ref - ref in want' ' - git -C "$REPO" config uploadpack.allowRefInWant true && - rm -rf local && - cp -r "$LOCAL_PRISTINE" local && - echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-sed" && - test_must_fail git -C local fetch 2>err && - - grep "ERR unknown ref refs/heads/raster" err -' - -stop_httpd - REPO="$(pwd)/repo" LOCAL_PRISTINE="$(pwd)/local_pristine" @@ -289,7 +198,7 @@ test_expect_success 'setup repos for fetching with ref-in-want tests' ' git clone "file://$REPO" "$LOCAL_PRISTINE" && cd "$LOCAL_PRISTINE" && git checkout -b side && - for i in $(test_seq 1 33); do test_commit s$i; done && + test_commit_bulk --id=s 33 && # Add novel commits to upstream git checkout master && @@ -313,13 +222,14 @@ test_expect_success 'fetching with exact OID' ' rm -rf local && cp -r "$LOCAL_PRISTINE" local && + oid=$(git -C "$REPO" rev-parse d) && GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ - $(git -C "$REPO" rev-parse d):refs/heads/actual && + "$oid":refs/heads/actual && git -C "$REPO" rev-parse "d" >expected && git -C local rev-parse refs/heads/actual >actual && test_cmp expected actual && - grep "want $(git -C "$REPO" rev-parse d)" log + grep "want $oid" log ' test_expect_success 'fetching multiple refs' ' @@ -341,13 +251,14 @@ test_expect_success 'fetching ref and exact OID' ' rm -rf local && cp -r "$LOCAL_PRISTINE" local && + oid=$(git -C "$REPO" rev-parse b) && GIT_TRACE_PACKET="$(pwd)/log" git -C local fetch origin \ - master $(git -C "$REPO" rev-parse b):refs/heads/actual && + master "$oid":refs/heads/actual && git -C "$REPO" rev-parse "master" "b" >expected && git -C local rev-parse refs/remotes/origin/master refs/heads/actual >actual && test_cmp expected actual && - grep "want $(git -C "$REPO" rev-parse b)" log && + grep "want $oid" log && grep "want-ref refs/heads/master" log ' @@ -374,4 +285,107 @@ test_expect_success 'fetching with wildcard that matches multiple refs' ' grep "want-ref refs/heads/o/bar" log ' +. "$TEST_DIRECTORY"/lib-httpd.sh +start_httpd + +REPO="$HTTPD_DOCUMENT_ROOT_PATH/repo" +LOCAL_PRISTINE="$(pwd)/local_pristine" + +test_expect_success 'setup repos for change-while-negotiating test' ' + ( + git init "$REPO" && + cd "$REPO" && + >.git/git-daemon-export-ok && + test_commit m1 && + git tag -d m1 && + + # Local repo with many commits (so that negotiation will take + # more than 1 request/response pair) + rm -rf "$LOCAL_PRISTINE" && + git clone "http://127.0.0.1:$LIB_HTTPD_PORT/smart/repo" "$LOCAL_PRISTINE" && + cd "$LOCAL_PRISTINE" && + git checkout -b side && + test_commit_bulk --id=s 33 && + + # Add novel commits to upstream + git checkout master && + cd "$REPO" && + test_commit m2 && + test_commit m3 && + git tag -d m2 m3 + ) && + git -C "$LOCAL_PRISTINE" remote set-url origin "http://127.0.0.1:$LIB_HTTPD_PORT/one_time_perl/repo" && + git -C "$LOCAL_PRISTINE" config protocol.version 2 +' + +inconsistency () { + # Simulate that the server initially reports $2 as the ref + # corresponding to $1, and after that, $1 as the ref corresponding to + # $1. This corresponds to the real-life situation where the server's + # repository appears to change during negotiation, for example, when + # different servers in a load-balancing arrangement serve (stateless) + # RPCs during a single negotiation. + oid1=$(git -C "$REPO" rev-parse $1) && + oid2=$(git -C "$REPO" rev-parse $2) && + echo "s/$oid1/$oid2/" >"$HTTPD_ROOT_PATH/one-time-perl" +} + +test_expect_success 'server is initially ahead - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master $(test_oid numeric) && + test_must_fail git -C local fetch 2>err && + test_i18ngrep "fatal: remote error: upload-pack: not our ref" err +' + +test_expect_success 'server is initially ahead - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master $(test_oid numeric) && + git -C local fetch && + + git -C "$REPO" rev-parse --verify master >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - no ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant false && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master^" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server is initially behind - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + inconsistency master "master^" && + git -C local fetch && + + git -C "$REPO" rev-parse --verify "master" >expected && + git -C local rev-parse --verify refs/remotes/origin/master >actual && + test_cmp expected actual +' + +test_expect_success 'server loses a ref - ref in want' ' + git -C "$REPO" config uploadpack.allowRefInWant true && + rm -rf local && + cp -r "$LOCAL_PRISTINE" local && + echo "s/master/raster/" >"$HTTPD_ROOT_PATH/one-time-perl" && + test_must_fail git -C local fetch 2>err && + + test_i18ngrep "fatal: remote error: unknown ref refs/heads/raster" err +' + +# DO NOT add non-httpd-specific tests here, because the last part of this +# test script is only executed when httpd is available and enabled. + test_done diff --git a/t/t5801-remote-helpers.sh b/t/t5801-remote-helpers.sh index aaaa722..121e5c6 100755 --- a/t/t5801-remote-helpers.sh +++ b/t/t5801-remote-helpers.sh @@ -8,6 +8,8 @@ test_description='Test remote-helper import and export commands' . ./test-lib.sh . "$TEST_DIRECTORY"/lib-gpg.sh +PATH="$TEST_DIRECTORY/t5801:$PATH" + compare_refs() { git --git-dir="$1/.git" rev-parse --verify $2 >expect && git --git-dir="$3/.git" rev-parse --verify $4 >actual && @@ -124,7 +126,7 @@ test_expect_success 'forced push' ' ' test_expect_success 'cloning without refspec' ' - GIT_REMOTE_TESTGIT_REFSPEC="" \ + GIT_REMOTE_TESTGIT_NOREFSPEC=1 \ git clone "testgit::${PWD}/server" local2 2>error && test_i18ngrep "this remote helper should implement refspec capability" error && compare_refs local2 HEAD server HEAD @@ -133,7 +135,7 @@ test_expect_success 'cloning without refspec' ' test_expect_success 'pulling without refspecs' ' (cd local2 && git reset --hard && - GIT_REMOTE_TESTGIT_REFSPEC="" git pull 2>../error) && + GIT_REMOTE_TESTGIT_NOREFSPEC=1 git pull 2>../error) && test_i18ngrep "this remote helper should implement refspec capability" error && compare_refs local2 HEAD server HEAD ' @@ -143,8 +145,8 @@ test_expect_success 'pushing without refspecs' ' (cd local2 && echo content >>file && git commit -a -m ten && - GIT_REMOTE_TESTGIT_REFSPEC="" && - export GIT_REMOTE_TESTGIT_REFSPEC && + GIT_REMOTE_TESTGIT_NOREFSPEC=1 && + export GIT_REMOTE_TESTGIT_NOREFSPEC && test_must_fail git push 2>../error) && test_i18ngrep "remote-helper doesn.t support push; refspec needed" error ' @@ -245,7 +247,6 @@ clean_mark () { test_expect_success 'proper failure checks for fetching' ' (cd local && test_must_fail env GIT_REMOTE_TESTGIT_FAILURE=1 git fetch 2>error && - cat error && test_i18ngrep -q "error while running fast-import" error ) ' @@ -301,4 +302,14 @@ test_expect_success 'fetch url' ' compare_refs server HEAD local FETCH_HEAD ' +test_expect_success 'fetch tag' ' + (cd server && + git tag v1.0 + ) && + (cd local && + git fetch + ) && + compare_refs local v1.0 server v1.0 +' + test_done diff --git a/t/t5801/git-remote-testgit b/t/t5801/git-remote-testgit new file mode 100755 index 0000000..6b9f0b5 --- /dev/null +++ b/t/t5801/git-remote-testgit @@ -0,0 +1,151 @@ +#!/bin/sh +# Copyright (c) 2012 Felipe Contreras + +# The first argument can be a url when the fetch/push command was a url +# instead of a configured remote. In this case, use a generic alias. +if test "$1" = "testgit::$2"; then + alias=_ +else + alias=$1 +fi +url=$2 + +dir="$GIT_DIR/testgit/$alias" + +h_refspec="refs/heads/*:refs/testgit/$alias/heads/*" +t_refspec="refs/tags/*:refs/testgit/$alias/tags/*" + +if test -n "$GIT_REMOTE_TESTGIT_NOREFSPEC" +then + h_refspec="" + t_refspec="" +fi + +GIT_DIR="$url/.git" +export GIT_DIR + +force= + +mkdir -p "$dir" + +if test -z "$GIT_REMOTE_TESTGIT_NO_MARKS" +then + gitmarks="$dir/git.marks" + testgitmarks="$dir/testgit.marks" + test -e "$gitmarks" || >"$gitmarks" + test -e "$testgitmarks" || >"$testgitmarks" +fi + +while read line +do + case $line in + capabilities) + echo 'import' + echo 'export' + test -n "$h_refspec" && echo "refspec $h_refspec" + test -n "$t_refspec" && echo "refspec $t_refspec" + if test -n "$gitmarks" + then + echo "*import-marks $gitmarks" + echo "*export-marks $gitmarks" + fi + test -n "$GIT_REMOTE_TESTGIT_SIGNED_TAGS" && echo "signed-tags" + test -n "$GIT_REMOTE_TESTGIT_NO_PRIVATE_UPDATE" && echo "no-private-update" + echo 'option' + echo + ;; + list) + git for-each-ref --format='? %(refname)' 'refs/heads/' 'refs/tags/' + head=$(git symbolic-ref HEAD) + echo "@$head HEAD" + echo + ;; + import*) + # read all import lines + while true + do + ref="${line#* }" + refs="$refs $ref" + read line + test "${line%% *}" != "import" && break + done + + if test -n "$gitmarks" + then + echo "feature import-marks=$gitmarks" + echo "feature export-marks=$gitmarks" + fi + + if test -n "$GIT_REMOTE_TESTGIT_FAILURE" + then + echo "feature done" + exit 1 + fi + + echo "feature done" + git fast-export \ + ${h_refspec:+"--refspec=$h_refspec"} \ + ${t_refspec:+"--refspec=$t_refspec"} \ + ${testgitmarks:+"--import-marks=$testgitmarks"} \ + ${testgitmarks:+"--export-marks=$testgitmarks"} \ + $refs + echo "done" + ;; + export) + if test -n "$GIT_REMOTE_TESTGIT_FAILURE" + then + # consume input so fast-export doesn't get SIGPIPE; + # git would also notice that case, but we want + # to make sure we are exercising the later + # error checks + while read line; do + test "done" = "$line" && break + done + exit 1 + fi + + before=$(git for-each-ref --format=' %(refname) %(objectname) ') + + git fast-import \ + ${force:+--force} \ + ${testgitmarks:+"--import-marks=$testgitmarks"} \ + ${testgitmarks:+"--export-marks=$testgitmarks"} \ + --quiet + + # figure out which refs were updated + git for-each-ref --format='%(refname) %(objectname)' | + while read ref a + do + case "$before" in + *" $ref $a "*) + continue ;; # unchanged + esac + if test -z "$GIT_REMOTE_TESTGIT_PUSH_ERROR" + then + echo "ok $ref" + else + echo "error $ref $GIT_REMOTE_TESTGIT_PUSH_ERROR" + fi + done + + echo + ;; + option\ *) + read cmd opt val <<-EOF + $line + EOF + case $opt in + force) + test $val = "true" && force="true" || force= + echo "ok" + ;; + *) + echo "unsupported" + ;; + esac + ;; + '') + exit + ;; + esac +done diff --git a/t/t5812-proto-disable-http.sh b/t/t5812-proto-disable-http.sh index 872788a..af8772f 100755 --- a/t/t5812-proto-disable-http.sh +++ b/t/t5812-proto-disable-http.sh @@ -34,5 +34,4 @@ test_expect_success 'http can be limited to from-user' ' clone "$HTTPD_URL/smart-redir-perm/repo.git" redir.git ' -stop_httpd test_done diff --git a/t/t6000-rev-list-misc.sh b/t/t6000-rev-list-misc.sh index 0507999..3dc1ad8 100755 --- a/t/t6000-rev-list-misc.sh +++ b/t/t6000-rev-list-misc.sh @@ -48,6 +48,26 @@ test_expect_success 'rev-list --objects with pathspecs and copied files' ' ! grep one output ' +test_expect_success 'rev-list --objects --no-object-names has no space/names' ' + git rev-list --objects --no-object-names HEAD >output && + ! grep wanted_file output && + ! grep unwanted_file output && + ! grep " " output +' + +test_expect_success 'rev-list --objects --no-object-names works with cat-file' ' + git rev-list --objects --no-object-names --all >list-output && + git cat-file --batch-check <list-output >cat-output && + ! grep missing cat-output +' + +test_expect_success '--no-object-names and --object-names are last-one-wins' ' + git rev-list --objects --no-object-names --object-names --all >output && + grep wanted_file output && + git rev-list --objects --object-names --no-object-names --all >output && + ! grep wanted_file output +' + test_expect_success 'rev-list A..B and rev-list ^A B are the same' ' git commit --allow-empty -m another && git tag -a -m "annotated" v1.0 && @@ -84,13 +104,16 @@ test_expect_success 'rev-list can show index objects' ' # - we do not show the root tree; since we updated the index, it # does not have a valid cache tree # - cat >expect <<-\EOF && - 8e4020bb5a8d8c873b25de15933e75cc0fc275df one - d9d3a7417b9605cfd88ee6306b28dadc29e6ab08 only-in-index - 9200b628cf9dc883a85a7abc8d6e6730baee589c two - EOF echo only-in-index >only-in-index && test_when_finished "git reset --hard" && + rev1=$(git rev-parse HEAD:one) && + rev2=$(git rev-parse HEAD:two) && + revi=$(git hash-object only-in-index) && + cat >expect <<-EOF && + $rev1 one + $revi only-in-index + $rev2 two + EOF git add only-in-index && git rev-list --objects --indexed-objects >actual && test_cmp expect actual @@ -120,4 +143,24 @@ test_expect_success '--header shows a NUL after each commit' ' test_cmp expect actual ' +test_expect_success 'rev-list --end-of-options' ' + git update-ref refs/heads/--output=yikes HEAD && + git rev-list --end-of-options --output=yikes >actual && + test_path_is_missing yikes && + git rev-list HEAD >expect && + test_cmp expect actual +' + +test_expect_success 'rev-list --count' ' + count=$(git rev-list --count HEAD) && + git rev-list HEAD >actual && + test_line_count = $count actual +' + +test_expect_success 'rev-list --count --objects' ' + count=$(git rev-list --count --objects HEAD) && + git rev-list --objects HEAD >actual && + test_line_count = $count actual +' + test_done diff --git a/t/t6006-rev-list-format.sh b/t/t6006-rev-list-format.sh index ec42c2f..7e82e43 100755 --- a/t/t6006-rev-list-format.sh +++ b/t/t6006-rev-list-format.sh @@ -32,6 +32,7 @@ changed_iso88591=$(echo "$changed" | iconv -f utf-8 -t $test_encoding) truncate_count=20 test_expect_success 'setup' ' + test_oid_init && : >foo && git add foo && git config i18n.commitEncoding $test_encoding && @@ -109,31 +110,35 @@ commit $head1 EOF # we don't test relative here -test_format author %an%n%ae%n%ad%n%aD%n%at <<EOF +test_format author %an%n%ae%n%al%n%ad%n%aD%n%at <<EOF commit $head2 -A U Thor -author@example.com +$GIT_AUTHOR_NAME +$GIT_AUTHOR_EMAIL +$TEST_AUTHOR_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 commit $head1 -A U Thor -author@example.com +$GIT_AUTHOR_NAME +$GIT_AUTHOR_EMAIL +$TEST_AUTHOR_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 EOF -test_format committer %cn%n%ce%n%cd%n%cD%n%ct <<EOF +test_format committer %cn%n%ce%n%cl%n%cd%n%cD%n%ct <<EOF commit $head2 -C O Mitter -committer@example.com +$GIT_COMMITTER_NAME +$GIT_COMMITTER_EMAIL +$TEST_COMMITTER_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 commit $head1 -C O Mitter -committer@example.com +$GIT_COMMITTER_NAME +$GIT_COMMITTER_EMAIL +$TEST_COMMITTER_LOCALNAME Thu Apr 7 15:13:13 2005 -0700 Thu, 7 Apr 2005 15:13:13 -0700 1112911993 @@ -185,6 +190,10 @@ test_expect_success 'basic colors' ' test_cmp expect actual ' +test_expect_success '%S is not a placeholder for rev-list yet' ' + git rev-list --format="%S" -1 master | grep "%S" +' + test_expect_success 'advanced colors' ' cat >expect <<-EOF && commit $head2 @@ -406,7 +415,7 @@ test_expect_success 'empty email' ' test_tick && C=$(GIT_AUTHOR_EMAIL= git commit-tree HEAD^{tree} </dev/null) && A=$(git show --pretty=format:%an,%ae,%ad%n -s $C) && - verbose test "$A" = "A U Thor,,Thu Apr 7 15:14:13 2005 -0700" + verbose test "$A" = "$GIT_AUTHOR_NAME,,Thu Apr 7 15:14:13 2005 -0700" ' test_expect_success 'del LF before empty (1)' ' @@ -455,9 +464,10 @@ test_expect_success '--abbrev' ' ' test_expect_success '%H is not affected by --abbrev-commit' ' + expected=$(($(test_oid hexsz) + 1)) && git log -1 --format=%H --abbrev-commit --abbrev=20 HEAD >actual && len=$(wc -c <actual) && - test $len = 41 + test $len = $expected ' test_expect_success '%h is not affected by --abbrev-commit' ' @@ -491,15 +501,14 @@ test_expect_success '%gd shortens ref name' ' ' test_expect_success 'reflog identity' ' - echo "C O Mitter:committer@example.com" >expect && + echo "$GIT_COMMITTER_NAME:$GIT_COMMITTER_EMAIL" >expect && git log -g -1 --format="%gn:%ge" >actual && test_cmp expect actual ' test_expect_success 'oneline with empty message' ' - git commit -m "dummy" --allow-empty && - git commit -m "dummy" --allow-empty && - git filter-branch --msg-filter "sed -e s/dummy//" HEAD^^.. && + git commit --allow-empty --cleanup=verbatim -m "$LF" && + git commit --allow-empty --allow-empty-message && git rev-list --oneline HEAD >test.txt && test_line_count = 5 test.txt && git rev-list --oneline --graph HEAD >testg.txt && diff --git a/t/t6011-rev-list-with-bad-commit.sh b/t/t6011-rev-list-with-bad-commit.sh index 545b461..bad02cf 100755 --- a/t/t6011-rev-list-with-bad-commit.sh +++ b/t/t6011-rev-list-with-bad-commit.sh @@ -42,7 +42,7 @@ test_expect_success 'corrupt second commit object' \ ' test_expect_success 'rev-list should fail' ' - test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git rev-list --all > /dev/null + test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git -c core.commitGraph=false rev-list --all > /dev/null ' test_expect_success 'git repack _MUST_ fail' \ diff --git a/t/t6016-rev-list-graph-simplify-history.sh b/t/t6016-rev-list-graph-simplify-history.sh index f7181d1..f5e6e92 100755 --- a/t/t6016-rev-list-graph-simplify-history.sh +++ b/t/t6016-rev-list-graph-simplify-history.sh @@ -67,11 +67,10 @@ test_expect_success '--graph --all' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "| | " >> expected && - echo "| \\ " >> expected && - echo "*-. \\ $A4" >> expected && - echo "|\\ \\ \\ " >> expected && - echo "| | |/ " >> expected && + echo "| | " >> expected && + echo "| \\ " >> expected && + echo "*-. | $A4" >> expected && + echo "|\\ \\| " >> expected && echo "| | * $C2" >> expected && echo "| | * $C1" >> expected && echo "| * | $B2" >> expected && @@ -97,11 +96,10 @@ test_expect_success '--graph --simplify-by-decoration' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "| | " >> expected && - echo "| \\ " >> expected && - echo "*-. \\ $A4" >> expected && - echo "|\\ \\ \\ " >> expected && - echo "| | |/ " >> expected && + echo "| | " >> expected && + echo "| \\ " >> expected && + echo "*-. | $A4" >> expected && + echo "|\\ \\| " >> expected && echo "| | * $C2" >> expected && echo "| | * $C1" >> expected && echo "| * | $B2" >> expected && @@ -131,9 +129,8 @@ test_expect_success '--graph --simplify-by-decoration prune branch B' ' echo "| * $C4" >> expected && echo "| * $C3" >> expected && echo "* | $A5" >> expected && - echo "* | $A4" >> expected && - echo "|\\ \\ " >> expected && - echo "| |/ " >> expected && + echo "* | $A4" >> expected && + echo "|\\| " >> expected && echo "| * $C2" >> expected && echo "| * $C1" >> expected && echo "* | $A3" >> expected && @@ -151,9 +148,8 @@ test_expect_success '--graph --full-history -- bar.txt' ' echo "|\\ " >> expected && echo "| * $C4" >> expected && echo "* | $A5" >> expected && - echo "* | $A4" >> expected && - echo "|\\ \\ " >> expected && - echo "| |/ " >> expected && + echo "* | $A4" >> expected && + echo "|\\| " >> expected && echo "* | $A3" >> expected && echo "|/ " >> expected && echo "* $A2" >> expected && @@ -255,7 +251,7 @@ test_expect_success '--graph --boundary ^C3' ' echo "* | | | $A3" >> expected && echo "o | | | $A2" >> expected && echo "|/ / / " >> expected && - echo "o | | $A1" >> expected && + echo "o / / $A1" >> expected && echo " / / " >> expected && echo "| o $C3" >> expected && echo "|/ " >> expected && diff --git a/t/t6019-rev-list-ancestry-path.sh b/t/t6019-rev-list-ancestry-path.sh index beadaf6..353f843 100755 --- a/t/t6019-rev-list-ancestry-path.sh +++ b/t/t6019-rev-list-ancestry-path.sh @@ -143,14 +143,14 @@ test_expect_success 'setup criss-cross' ' test_expect_success 'criss-cross: rev-list --ancestry-path cb..bc' ' (cd criss-cross && git rev-list --ancestry-path xcb..xbc > actual && - test -z "$(cat actual)") + test_must_be_empty actual) ' # no commits in repository descend from cb test_expect_success 'criss-cross: rev-list --ancestry-path --all ^cb' ' (cd criss-cross && git rev-list --ancestry-path --all ^xcb > actual && - test -z "$(cat actual)") + test_must_be_empty actual) ' test_done diff --git a/t/t6020-merge-df.sh b/t/t6020-merge-df.sh index 46b506b..400a4cd 100755 --- a/t/t6020-merge-df.sh +++ b/t/t6020-merge-df.sh @@ -83,9 +83,9 @@ test_expect_success 'modify/delete + directory/file conflict' ' test 4 -eq $(git ls-files -u | wc -l) && test 1 -eq $(git ls-files -o | wc -l) && - test -f letters/file && - test -f letters.txt && - test -f letters~modify + test_path_is_file letters/file && + test_path_is_file letters.txt && + test_path_is_file letters~modify ' test_expect_success 'modify/delete + directory/file conflict; other way' ' @@ -99,9 +99,52 @@ test_expect_success 'modify/delete + directory/file conflict; other way' ' test 4 -eq $(git ls-files -u | wc -l) && test 1 -eq $(git ls-files -o | wc -l) && - test -f letters/file && - test -f letters.txt && - test -f letters~HEAD + test_path_is_file letters/file && + test_path_is_file letters.txt && + test_path_is_file letters~HEAD +' + +test_expect_success 'Simple merge in repo with interesting pathnames' ' + # Simple lexicographic ordering of files and directories would be: + # foo + # foo/bar + # foo/bar-2 + # foo/bar/baz + # foo/bar-2/baz + # The fact that foo/bar-2 appears between foo/bar and foo/bar/baz + # can trip up some codepaths, and is the point of this test. + test_create_repo name-ordering && + ( + cd name-ordering && + + mkdir -p foo/bar && + mkdir -p foo/bar-2 && + >foo/bar/baz && + >foo/bar-2/baz && + git add . && + git commit -m initial && + + git branch main && + git branch other && + + git checkout other && + echo other >foo/bar-2/baz && + git add -u && + git commit -m other && + + git checkout main && + echo main >foo/bar/baz && + git add -u && + git commit -m main && + + git merge other && + git ls-files -s >out && + test_line_count = 2 out && + git rev-parse :0:foo/bar/baz :0:foo/bar-2/baz >actual && + git rev-parse HEAD~1:foo/bar/baz other:foo/bar-2/baz >expect && + test_cmp expect actual + ) + ' test_done diff --git a/t/t6021-merge-criss-cross.sh b/t/t6021-merge-criss-cross.sh index 213deec..9d5e992 100755 --- a/t/t6021-merge-criss-cross.sh +++ b/t/t6021-merge-criss-cross.sh @@ -3,94 +3,65 @@ # Copyright (c) 2005 Fredrik Kuivinen # -# See http://marc.info/?l=git&m=111463358500362&w=2 for a +# See https://lore.kernel.org/git/Pine.LNX.4.44.0504271254120.4678-100000@wax.eds.org/ for a # nice description of what this is about. test_description='Test criss-cross merge' . ./test-lib.sh -test_expect_success 'prepare repository' \ -'echo "1 -2 -3 -4 -5 -6 -7 -8 -9" > file && -git add file && -git commit -m "Initial commit" file && -git branch A && -git branch B && -git checkout A && -echo "1 -2 -3 -4 -5 -6 -7 -8 changed in B8, branch A -9" > file && -git commit -m "B8" file && -git checkout B && -echo "1 -2 -3 changed in C3, branch B -4 -5 -6 -7 -8 -9 -" > file && -git commit -m "C3" file && -git branch C3 && -git merge -m "pre E3 merge" A && -echo "1 -2 -3 changed in E3, branch B. New file size -4 -5 -6 -7 -8 changed in B8, branch A -9 -" > file && -git commit -m "E3" file && -git checkout A && -git merge -m "pre D8 merge" C3 && -echo "1 -2 -3 changed in C3, branch B -4 -5 -6 -7 -8 changed in D8, branch A. New file size 2 -9" > file && -git commit -m D8 file' - -test_expect_success 'Criss-cross merge' 'git merge -m "final merge" B' - -cat > file-expect <<EOF -1 -2 -3 changed in E3, branch B. New file size -4 -5 -6 -7 -8 changed in D8, branch A. New file size 2 -9 -EOF - -test_expect_success 'Criss-cross merge result' 'cmp file file-expect' - -test_expect_success 'Criss-cross merge fails (-s resolve)' \ -'git reset --hard A^ && -test_must_fail git merge -s resolve -m "final merge" B' +test_expect_success 'prepare repository' ' + test_write_lines 1 2 3 4 5 6 7 8 9 >file && + git add file && + git commit -m "Initial commit" file && + + git branch A && + git branch B && + git checkout A && + + test_write_lines 1 2 3 4 5 6 7 "8 changed in B8, branch A" 9 >file && + git commit -m "B8" file && + git checkout B && + + test_write_lines 1 2 "3 changed in C3, branch B" 4 5 6 7 8 9 >file && + git commit -m "C3" file && + git branch C3 && + + git merge -m "pre E3 merge" A && + + test_write_lines 1 2 "3 changed in E3, branch B. New file size" 4 5 6 7 "8 changed in B8, branch A" 9 >file && + git commit -m "E3" file && + + git checkout A && + git merge -m "pre D8 merge" C3 && + test_write_lines 1 2 "3 changed in C3, branch B" 4 5 6 7 "8 changed in D8, branch A. New file size 2" 9 >file && + + git commit -m D8 file +' + +test_expect_success 'Criss-cross merge' ' + git merge -m "final merge" B +' + +test_expect_success 'Criss-cross merge result' ' + cat <<-\EOF >file-expect && + 1 + 2 + 3 changed in E3, branch B. New file size + 4 + 5 + 6 + 7 + 8 changed in D8, branch A. New file size 2 + 9 + EOF + + test_cmp file-expect file +' + +test_expect_success 'Criss-cross merge fails (-s resolve)' ' + git reset --hard A^ && + test_must_fail git merge -s resolve -m "final merge" B +' test_done diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh index 53cc9b2..d97cf48 100755 --- a/t/t6022-merge-rename.sh +++ b/t/t6022-merge-rename.sh @@ -8,94 +8,94 @@ modify () { mv "$2.x" "$2" } -test_expect_success setup \ -' -cat >A <<\EOF && -a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa -b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb -c cccccccccccccccccccccccccccccccccccccccccccccccc -d dddddddddddddddddddddddddddddddddddddddddddddddd -e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee -f ffffffffffffffffffffffffffffffffffffffffffffffff -g gggggggggggggggggggggggggggggggggggggggggggggggg -h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh -i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii -j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj -k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk -l llllllllllllllllllllllllllllllllllllllllllllllll -m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm -n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn -o oooooooooooooooooooooooooooooooooooooooooooooooo -EOF - -cat >M <<\EOF && -A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA -B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB -C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC -D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD -E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE -F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG -H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH -I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII -J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ -K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK -L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL -M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM -N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN -O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO -EOF - -git add A M && -git commit -m "initial has A and M" && -git branch white && -git branch red && -git branch blue && -git branch yellow && -git branch change && -git branch change+rename && - -sed -e "/^g /s/.*/g : master changes a line/" <A >A+ && -mv A+ A && -git commit -a -m "master updates A" && - -git checkout yellow && -rm -f M && -git commit -a -m "yellow removes M" && - -git checkout white && -sed -e "/^g /s/.*/g : white changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "white renames A->B, M->N" && - -git checkout red && -sed -e "/^g /s/.*/g : red changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "red renames A->B, M->N" && - -git checkout blue && -sed -e "/^g /s/.*/g : blue changes a line/" <A >C && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A C M N && -git commit -m "blue renames A->C, M->N" && - -git checkout change && -sed -e "/^g /s/.*/g : changed line/" <A >A+ && -mv A+ A && -git commit -q -a -m "changed" && - -git checkout change+rename && -sed -e "/^g /s/.*/g : changed line/" <A >B && -rm A && -git update-index --add B && -git commit -q -a -m "changed and renamed" && - -git checkout master' +test_expect_success 'setup' ' + cat >A <<-\EOF && + a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa + b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb + c cccccccccccccccccccccccccccccccccccccccccccccccc + d dddddddddddddddddddddddddddddddddddddddddddddddd + e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee + f ffffffffffffffffffffffffffffffffffffffffffffffff + g gggggggggggggggggggggggggggggggggggggggggggggggg + h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh + i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii + j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj + k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk + l llllllllllllllllllllllllllllllllllllllllllllllll + m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm + n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn + o oooooooooooooooooooooooooooooooooooooooooooooooo + EOF + + cat >M <<-\EOF && + A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA + B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB + C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC + D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE + F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF + G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG + H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII + J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ + K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK + L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL + M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN + O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO + EOF + + git add A M && + git commit -m "initial has A and M" && + git branch white && + git branch red && + git branch blue && + git branch yellow && + git branch change && + git branch change+rename && + + sed -e "/^g /s/.*/g : master changes a line/" <A >A+ && + mv A+ A && + git commit -a -m "master updates A" && + + git checkout yellow && + rm -f M && + git commit -a -m "yellow removes M" && + + git checkout white && + sed -e "/^g /s/.*/g : white changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "white renames A->B, M->N" && + + git checkout red && + sed -e "/^g /s/.*/g : red changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "red renames A->B, M->N" && + + git checkout blue && + sed -e "/^g /s/.*/g : blue changes a line/" <A >C && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A C M N && + git commit -m "blue renames A->C, M->N" && + + git checkout change && + sed -e "/^g /s/.*/g : changed line/" <A >A+ && + mv A+ A && + git commit -q -a -m "changed" && + + git checkout change+rename && + sed -e "/^g /s/.*/g : changed line/" <A >B && + rm A && + git update-index --add B && + git commit -q -a -m "changed and renamed" && + + git checkout master +' test_expect_success 'pull renaming branch into unrenaming one' \ ' @@ -242,12 +242,23 @@ test_expect_success 'merge of identical changes in a renamed file' ' rm -f A M N && git reset --hard && git checkout change+rename && + + test-tool chmtime =31337 B && + test-tool chmtime --get B >old-mtime && GIT_MERGE_VERBOSITY=3 git merge change >out && - test_i18ngrep "^Skipped B" out && + + test-tool chmtime --get B >new-mtime && + test_cmp old-mtime new-mtime && + git reset --hard HEAD^ && git checkout change && + + test-tool chmtime =-1 M && + test-tool chmtime --get M >old-mtime && GIT_MERGE_VERBOSITY=3 git merge change+rename >out && - test_i18ngrep ! "^Skipped B" out + + test-tool chmtime --get B >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) ' test_expect_success 'setup for rename + d/f conflicts' ' @@ -288,14 +299,15 @@ test_expect_success 'setup for rename + d/f conflicts' ' git commit -m "Conflicting change" ' -printf "1\n2\n3\n4\n5555\n6\n7\n8\n9\n10\n11\n" >expected - test_expect_success 'Rename+D/F conflict; renamed file merges + dir not in way' ' git reset --hard && git checkout -q renamed-file-has-no-conflicts^0 && + git merge --strategy=recursive dir-not-in-way && + git diff --quiet && - test -f dir && + test_path_is_file dir && + test_write_lines 1 2 3 4 5555 6 7 8 9 10 11 >expected && test_cmp expected dir ' @@ -315,8 +327,8 @@ test_expect_success 'Rename+D/F conflict; renamed file merges but dir in way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~HEAD && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~HEAD && test_cmp expected dir~HEAD ' @@ -337,29 +349,11 @@ test_expect_success 'Same as previous, but merged other way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~renamed-file-has-no-conflicts && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~renamed-file-has-no-conflicts && test_cmp expected dir~renamed-file-has-no-conflicts ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -<<<<<<< HEAD:dir -12 -======= -11 ->>>>>>> dir-not-in-way:sub/file -EOF - test_expect_success 'Rename+D/F conflict; renamed file cannot merge, dir not in way' ' git reset --hard && rm -rf dir~* && @@ -372,7 +366,24 @@ test_expect_success 'Rename+D/F conflict; renamed file cannot merge, dir not in test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir && + test_path_is_file dir && + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + <<<<<<< HEAD:dir + 12 + ======= + 11 + >>>>>>> dir-not-in-way:sub/file + EOF test_cmp expected dir ' @@ -391,29 +402,11 @@ test_expect_success 'Rename+D/F conflict; renamed file cannot merge and dir in t test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~HEAD && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~HEAD && test_cmp expected dir~HEAD ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -<<<<<<< HEAD:sub/file -11 -======= -12 ->>>>>>> renamed-file-has-conflicts:dir -EOF - test_expect_success 'Same as previous, but merged other way' ' git reset --hard && rm -rf dir~* && @@ -427,8 +420,25 @@ test_expect_success 'Same as previous, but merged other way' ' test_must_fail git diff --quiet && test_must_fail git diff --cached --quiet && - test -f dir/file-in-the-way && - test -f dir~renamed-file-has-conflicts && + test_path_is_file dir/file-in-the-way && + test_path_is_file dir~renamed-file-has-conflicts && + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + <<<<<<< HEAD:sub/file + 11 + ======= + 12 + >>>>>>> renamed-file-has-conflicts:dir + EOF test_cmp expected dir~renamed-file-has-conflicts ' @@ -464,9 +474,9 @@ test_expect_success 'both rename source and destination involved in D/F conflict test_must_fail git diff --quiet && - test -f destdir/foo && - test -f one && - test -f destdir~HEAD && + test_path_is_file destdir/foo && + test_path_is_file one && + test_path_is_file destdir~HEAD && test "stuff" = "$(cat destdir~HEAD)" ' @@ -507,9 +517,9 @@ test_expect_success 'pair rename to parent of other (D/F conflicts) w/ untracked test 4 -eq $(find . | grep -v .git | wc -l) && - test -d one && - test -f one~rename-two && - test -f two && + test_path_is_dir one && + test_path_is_file one~rename-two && + test_path_is_file two && test "other" = $(cat one~rename-two) && test "stuff" = $(cat two) ' @@ -527,8 +537,8 @@ test_expect_success 'pair rename to parent of other (D/F conflicts) w/ clean sta test 3 -eq $(find . | grep -v .git | wc -l) && - test -f one && - test -f two && + test_path_is_file one && + test_path_is_file two && test "other" = $(cat one) && test "stuff" = $(cat two) ' @@ -568,11 +578,11 @@ test_expect_success 'check handling of differently renamed file with D/F conflic test 1 -eq "$(git ls-files -u original | wc -l)" && test 2 -eq "$(git ls-files -o | wc -l)" && - test -f one/file && - test -f two/file && - test -f one~HEAD && - test -f two~second-rename && - ! test -f original + test_path_is_file one/file && + test_path_is_file two/file && + test_path_is_file one~HEAD && + test_path_is_file two~second-rename && + test_path_is_missing original ' test_expect_success 'setup rename one file to two; directories moving out of the way' ' @@ -607,9 +617,9 @@ test_expect_success 'check handling of differently renamed file with D/F conflic test 1 -eq "$(git ls-files -u original | wc -l)" && test 0 -eq "$(git ls-files -o | wc -l)" && - test -f one && - test -f two && - ! test -f original + test_path_is_file one && + test_path_is_file two && + test_path_is_missing original ' test_expect_success 'setup avoid unnecessary update, normal rename' ' @@ -810,48 +820,48 @@ test_expect_success 'setup for use of extended merge markers' ' git commit -mC ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -<<<<<<< HEAD:renamed_file -9 -======= -8.5 ->>>>>>> master^0:original_file -EOF - test_expect_success 'merge master into rename has correct extended markers' ' git checkout rename^0 && test_must_fail git merge -s recursive master^0 && + + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + <<<<<<< HEAD:renamed_file + 9 + ======= + 8.5 + >>>>>>> master^0:original_file + EOF test_cmp expected renamed_file ' -cat >expected <<\EOF && -1 -2 -3 -4 -5 -6 -7 -8 -<<<<<<< HEAD:original_file -8.5 -======= -9 ->>>>>>> rename^0:renamed_file -EOF - test_expect_success 'merge rename into master has correct extended markers' ' git reset --hard && git checkout master^0 && test_must_fail git merge -s recursive rename^0 && + + cat >expected <<-\EOF && + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + <<<<<<< HEAD:original_file + 8.5 + ======= + 9 + >>>>>>> rename^0:renamed_file + EOF test_cmp expected renamed_file ' diff --git a/t/t6023-merge-file.sh b/t/t6023-merge-file.sh index 51ee887..2f421d9 100755 --- a/t/t6023-merge-file.sh +++ b/t/t6023-merge-file.sh @@ -3,56 +3,59 @@ test_description='RCS merge replacement: merge-file' . ./test-lib.sh -cat > orig.txt << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new1.txt << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -cat > new2.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new3.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -EOF - -cat > new4.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -EOF -printf "propter nomen suum." >> new4.txt +test_expect_success 'setup' ' + cat >orig.txt <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new1.txt <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + cat >new2.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new3.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + EOF + + cat >new4.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + EOF + + printf "propter nomen suum." >>new4.txt +' test_expect_success 'merge with no changes' ' cp orig.txt test.txt && @@ -60,9 +63,10 @@ test_expect_success 'merge with no changes' ' test_cmp test.txt orig.txt ' -cp new1.txt test.txt -test_expect_success "merge without conflict" \ - "git merge-file test.txt orig.txt new2.txt" +test_expect_success "merge without conflict" ' + cp new1.txt test.txt && + git merge-file test.txt orig.txt new2.txt +' test_expect_success 'works in subdirectory' ' mkdir dir && @@ -73,151 +77,176 @@ test_expect_success 'works in subdirectory' ' test_path_is_missing a.txt ' -cp new1.txt test.txt -test_expect_success "merge without conflict (--quiet)" \ - "git merge-file --quiet test.txt orig.txt new2.txt" - -cp new1.txt test2.txt -test_expect_failure "merge without conflict (missing LF at EOF)" \ - "git merge-file test2.txt orig.txt new4.txt" - -test_expect_failure "merge result added missing LF" \ - "test_cmp test.txt test2.txt" - -cp new4.txt test3.txt -test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" \ - "git merge-file --quiet test3.txt new2.txt new3.txt" - -cat > expect.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -EOF -printf "propter nomen suum." >> expect.txt - -test_expect_success "merge does not add LF away of change" \ - "test_cmp expect.txt test3.txt" - -cp test.txt backup.txt -test_expect_success "merge with conflicts" \ - "test_must_fail git merge-file test.txt orig.txt new3.txt" - -cat > expect.txt << EOF -<<<<<<< test.txt -Dominus regit me, et nihil mihi deerit. -======= -DOMINUS regit me, -et nihil mihi deerit. ->>>>>>> new3.txt -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -test_expect_success "expected conflict markers" "test_cmp expect.txt test.txt" - -cp backup.txt test.txt - -cat > expect.txt << EOF -Dominus regit me, et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --ours" \ - "git merge-file --ours test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -cat > expect.txt << EOF -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --theirs" \ - "git merge-file --theirs test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -cat > expect.txt << EOF -Dominus regit me, et nihil mihi deerit. -DOMINUS regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF -test_expect_success "merge conflicting with --union" \ - "git merge-file --union test.txt orig.txt new3.txt && test_cmp expect.txt test.txt" -cp backup.txt test.txt - -test_expect_success "merge with conflicts, using -L" \ - "test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt" - -cat > expect.txt << EOF -<<<<<<< 1 -Dominus regit me, et nihil mihi deerit. -======= -DOMINUS regit me, -et nihil mihi deerit. ->>>>>>> new3.txt -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam tu mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF - -test_expect_success "expected conflict markers, with -L" \ - "test_cmp expect.txt test.txt" - -sed "s/ tu / TU /" < new1.txt > new5.txt -test_expect_success "conflict in removed tail" \ - "test_must_fail git merge-file -p orig.txt new1.txt new5.txt > out" - -cat > expect << EOF -Dominus regit me, -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -<<<<<<< orig.txt -======= -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. ->>>>>>> new5.txt -EOF - -test_expect_success "expected conflict markers" "test_cmp expect out" +test_expect_success "merge without conflict (--quiet)" ' + cp new1.txt test.txt && + git merge-file --quiet test.txt orig.txt new2.txt +' + +test_expect_failure "merge without conflict (missing LF at EOF)" ' + cp new1.txt test2.txt && + git merge-file test2.txt orig.txt new4.txt +' + +test_expect_failure "merge result added missing LF" ' + test_cmp test.txt test2.txt +' + +test_expect_success "merge without conflict (missing LF at EOF, away from change in the other file)" ' + cp new4.txt test3.txt && + git merge-file --quiet test3.txt new2.txt new3.txt +' + +test_expect_success "merge does not add LF away of change" ' + cat >expect.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + EOF + printf "propter nomen suum." >>expect.txt && + + test_cmp expect.txt test3.txt +' + +test_expect_success "merge with conflicts" ' + cp test.txt backup.txt && + test_must_fail git merge-file test.txt orig.txt new3.txt +' + +test_expect_success "expected conflict markers" ' + cat >expect.txt <<-\EOF && + <<<<<<< test.txt + Dominus regit me, et nihil mihi deerit. + ======= + DOMINUS regit me, + et nihil mihi deerit. + >>>>>>> new3.txt + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --ours" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --ours test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --theirs" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --theirs test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge conflicting with --union" ' + cp backup.txt test.txt && + + cat >expect.txt <<-\EOF && + Dominus regit me, et nihil mihi deerit. + DOMINUS regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + git merge-file --union test.txt orig.txt new3.txt && + test_cmp expect.txt test.txt +' + +test_expect_success "merge with conflicts, using -L" ' + cp backup.txt test.txt && + + test_must_fail git merge-file -L 1 -L 2 test.txt orig.txt new3.txt +' + +test_expect_success "expected conflict markers, with -L" ' + cat >expect.txt <<-\EOF && + <<<<<<< 1 + Dominus regit me, et nihil mihi deerit. + ======= + DOMINUS regit me, + et nihil mihi deerit. + >>>>>>> new3.txt + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam tu mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF + + test_cmp expect.txt test.txt +' + +test_expect_success "conflict in removed tail" ' + sed "s/ tu / TU /" <new1.txt >new5.txt && + test_must_fail git merge-file -p orig.txt new1.txt new5.txt >out +' + +test_expect_success "expected conflict markers" ' + cat >expect <<-\EOF && + Dominus regit me, + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + <<<<<<< orig.txt + ======= + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + >>>>>>> new5.txt + EOF + + test_cmp expect out +' test_expect_success 'binary files cannot be merged' ' test_must_fail git merge-file -p \ @@ -225,59 +254,55 @@ test_expect_success 'binary files cannot be merged' ' grep "Cannot merge binary files" merge.err ' -sed -e "s/deerit.\$/deerit;/" -e "s/me;\$/me./" < new5.txt > new6.txt -sed -e "s/deerit.\$/deerit,/" -e "s/me;\$/me,/" < new5.txt > new7.txt - test_expect_success 'MERGE_ZEALOUS simplifies non-conflicts' ' + sed -e "s/deerit.\$/deerit;/" -e "s/me;\$/me./" <new5.txt >new6.txt && + sed -e "s/deerit.\$/deerit,/" -e "s/me;\$/me,/" <new5.txt >new7.txt && test_must_fail git merge-file -p new6.txt new5.txt new7.txt > output && - test 1 = $(grep ======= < output | wc -l) - + test 1 = $(grep ======= <output | wc -l) ' -sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit;/"< new6.txt | tr '%' '\012' > new8.txt -sed -e 's/deerit./&%%%%/' -e "s/locavit,/locavit --/" < new7.txt | tr '%' '\012' > new9.txt - test_expect_success 'ZEALOUS_ALNUM' ' + sed -e "s/deerit./&%%%%/" -e "s/locavit,/locavit;/" <new6.txt | tr % "\012" >new8.txt && + sed -e "s/deerit./&%%%%/" -e "s/locavit,/locavit --/" <new7.txt | tr % "\012" >new9.txt && test_must_fail git merge-file -p \ - new8.txt new5.txt new9.txt > merge.out && - test 1 = $(grep ======= < merge.out | wc -l) - + new8.txt new5.txt new9.txt >merge.out && + test 1 = $(grep ======= <merge.out | wc -l) ' -cat >expect <<\EOF -Dominus regit me, -<<<<<<< new8.txt -et nihil mihi deerit; +test_expect_success '"diff3 -m" style output (1)' ' + cat >expect <<-\EOF && + Dominus regit me, + <<<<<<< new8.txt + et nihil mihi deerit; -In loco pascuae ibi me collocavit; -super aquam refectionis educavit me. -||||||| new5.txt -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -======= -et nihil mihi deerit, + In loco pascuae ibi me collocavit; + super aquam refectionis educavit me. + ||||||| new5.txt + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + ======= + et nihil mihi deerit, -In loco pascuae ibi me collocavit -- -super aquam refectionis educavit me, ->>>>>>> new9.txt -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF + In loco pascuae ibi me collocavit -- + super aquam refectionis educavit me, + >>>>>>> new9.txt + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF -test_expect_success '"diff3 -m" style output (1)' ' test_must_fail git merge-file -p --diff3 \ new8.txt new5.txt new9.txt >actual && test_cmp expect actual @@ -290,61 +315,64 @@ test_expect_success '"diff3 -m" style output (2)' ' test_cmp expect actual ' -cat >expect <<\EOF -Dominus regit me, -<<<<<<<<<< new8.txt -et nihil mihi deerit; +test_expect_success 'marker size' ' + cat >expect <<-\EOF && + Dominus regit me, + <<<<<<<<<< new8.txt + et nihil mihi deerit; -In loco pascuae ibi me collocavit; -super aquam refectionis educavit me. -|||||||||| new5.txt -et nihil mihi deerit. -In loco pascuae ibi me collocavit, -super aquam refectionis educavit me; -========== -et nihil mihi deerit, + In loco pascuae ibi me collocavit; + super aquam refectionis educavit me. + |||||||||| new5.txt + et nihil mihi deerit. + In loco pascuae ibi me collocavit, + super aquam refectionis educavit me; + ========== + et nihil mihi deerit, -In loco pascuae ibi me collocavit -- -super aquam refectionis educavit me, ->>>>>>>>>> new9.txt -animam meam convertit, -deduxit me super semitas jusitiae, -propter nomen suum. -Nam et si ambulavero in medio umbrae mortis, -non timebo mala, quoniam TU mecum es: -virga tua et baculus tuus ipsa me consolata sunt. -EOF + In loco pascuae ibi me collocavit -- + super aquam refectionis educavit me, + >>>>>>>>>> new9.txt + animam meam convertit, + deduxit me super semitas jusitiae, + propter nomen suum. + Nam et si ambulavero in medio umbrae mortis, + non timebo mala, quoniam TU mecum es: + virga tua et baculus tuus ipsa me consolata sunt. + EOF -test_expect_success 'marker size' ' test_must_fail git merge-file -p --marker-size=10 \ new8.txt new5.txt new9.txt >actual && test_cmp expect actual ' -printf "line1\nline2\nline3" >nolf-orig.txt -printf "line1\nline2\nline3x" >nolf-diff1.txt -printf "line1\nline2\nline3y" >nolf-diff2.txt +test_expect_success 'conflict at EOF without LF resolved by --ours' ' + printf "line1\nline2\nline3" >nolf-orig.txt && + printf "line1\nline2\nline3x" >nolf-diff1.txt && + printf "line1\nline2\nline3y" >nolf-diff2.txt && -test_expect_success 'conflict at EOF without LF resolved by --ours' \ - 'git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3x" >expect.txt && - test_cmp expect.txt output.txt' + git merge-file -p --ours nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x" >expect.txt && + test_cmp expect.txt output.txt +' -test_expect_success 'conflict at EOF without LF resolved by --theirs' \ - 'git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3y" >expect.txt && - test_cmp expect.txt output.txt' +test_expect_success 'conflict at EOF without LF resolved by --theirs' ' + git merge-file -p --theirs nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3y" >expect.txt && + test_cmp expect.txt output.txt +' -test_expect_success 'conflict at EOF without LF resolved by --union' \ - 'git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && - printf "line1\nline2\nline3x\nline3y" >expect.txt && - test_cmp expect.txt output.txt' +test_expect_success 'conflict at EOF without LF resolved by --union' ' + git merge-file -p --union nolf-diff1.txt nolf-orig.txt nolf-diff2.txt >output.txt && + printf "line1\nline2\nline3x\nline3y" >expect.txt && + test_cmp expect.txt output.txt +' test_expect_success 'conflict sections match existing line endings' ' printf "1\\r\\n2\\r\\n3" >crlf-orig.txt && diff --git a/t/t6024-recursive-merge.sh b/t/t6024-recursive-merge.sh index 27c7de9..332cfc5 100755 --- a/t/t6024-recursive-merge.sh +++ b/t/t6024-recursive-merge.sh @@ -14,85 +14,95 @@ test_description='Test merge without common ancestors' GIT_COMMITTER_DATE="2006-12-12 23:28:00 +0100" export GIT_COMMITTER_DATE -test_expect_success "setup tests" ' -echo 1 > a1 && -git add a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:00" git commit -m 1 a1 && - -git checkout -b A master && -echo A > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:01" git commit -m A a1 && - -git checkout -b B master && -echo B > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:02" git commit -m B a1 && - -git checkout -b D A && -git rev-parse B > .git/MERGE_HEAD && -echo D > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:03" git commit -m D && - -git symbolic-ref HEAD refs/heads/other && -echo 2 > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:04" git commit -m 2 a1 && - -git checkout -b C && -echo C > a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:05" git commit -m C a1 && - -git checkout -b E C && -git rev-parse B > .git/MERGE_HEAD && -echo E > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:06" git commit -m E && - -git checkout -b G E && -git rev-parse A > .git/MERGE_HEAD && -echo G > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:07" git commit -m G && - -git checkout -b F D && -git rev-parse C > .git/MERGE_HEAD && -echo F > a1 && -git update-index a1 && -GIT_AUTHOR_DATE="2006-12-12 23:00:08" git commit -m F +test_expect_success 'setup tests' ' + echo 1 >a1 && + git add a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:00" git commit -m 1 a1 && + + git checkout -b A master && + echo A >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:01" git commit -m A a1 && + + git checkout -b B master && + echo B >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:02" git commit -m B a1 && + + git checkout -b D A && + git rev-parse B >.git/MERGE_HEAD && + echo D >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:03" git commit -m D && + + git symbolic-ref HEAD refs/heads/other && + echo 2 >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:04" git commit -m 2 a1 && + + git checkout -b C && + echo C >a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:05" git commit -m C a1 && + + git checkout -b E C && + git rev-parse B >.git/MERGE_HEAD && + echo E >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:06" git commit -m E && + + git checkout -b G E && + git rev-parse A >.git/MERGE_HEAD && + echo G >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:07" git commit -m G && + + git checkout -b F D && + git rev-parse C >.git/MERGE_HEAD && + echo F >a1 && + git update-index a1 && + GIT_AUTHOR_DATE="2006-12-12 23:00:08" git commit -m F && + + test_oid_cache <<-EOF + idxstage1 sha1:ec3fe2a791706733f2d8fa7ad45d9a9672031f5e + idxstage1 sha256:b3c8488929903aaebdeb22270cb6d36e5b8724b01ae0d4da24632f158c99676f + EOF ' test_expect_success 'combined merge conflicts' ' test_must_fail env GIT_TEST_COMMIT_GRAPH=0 git merge -m final G ' -cat > expect << EOF -<<<<<<< HEAD -F -======= -G ->>>>>>> G -EOF +test_expect_success 'result contains a conflict' ' + cat >expect <<-\EOF && + <<<<<<< HEAD + F + ======= + G + >>>>>>> G + EOF -test_expect_success "result contains a conflict" "test_cmp expect a1" + test_cmp expect a1 +' + +test_expect_success 'virtual trees were processed' ' + git ls-files --stage >out && -git ls-files --stage > out -cat > expect << EOF -100644 ec3fe2a791706733f2d8fa7ad45d9a9672031f5e 1 a1 -100644 cf84443e49e1b366fac938711ddf4be2d4d1d9e9 2 a1 -100644 fd7923529855d0b274795ae3349c5e0438333979 3 a1 -EOF + cat >expect <<-EOF && + 100644 $(test_oid idxstage1) 1 a1 + 100644 $(git rev-parse F:a1) 2 a1 + 100644 $(git rev-parse G:a1) 3 a1 + EOF -test_expect_success "virtual trees were processed" "test_cmp expect out" + test_cmp expect out +' test_expect_success 'refuse to merge binary files' ' git reset --hard && - printf "\0" > binary-file && + printf "\0" >binary-file && git add binary-file && git commit -m binary && git checkout G && - printf "\0\0" > binary-file && + printf "\0\0" >binary-file && git add binary-file && git commit -m binary2 && - test_must_fail git merge F > merge.out 2> merge.err && + test_must_fail git merge F >merge.out 2>merge.err && grep "Cannot merge binary files: binary-file (HEAD vs. F)" merge.err ' @@ -116,7 +126,6 @@ test_expect_success 'mark rename/delete as unmerged' ' test 1 = $(git ls-files --unmerged | wc -l) && test_must_fail git rev-parse --verify :2:a2 && git rev-parse --verify :3:a2 - ' test_done diff --git a/t/t6025-merge-symlinks.sh b/t/t6025-merge-symlinks.sh index 433c4de..6c0a90d 100755 --- a/t/t6025-merge-symlinks.sh +++ b/t/t6025-merge-symlinks.sh @@ -10,52 +10,53 @@ if core.symlinks is false.' . ./test-lib.sh -test_expect_success \ -'setup' ' -git config core.symlinks false && -> file && -git add file && -git commit -m initial && -git branch b-symlink && -git branch b-file && -l=$(printf file | git hash-object -t blob -w --stdin) && -echo "120000 $l symlink" | git update-index --index-info && -git commit -m master && -git checkout b-symlink && -l=$(printf file-different | git hash-object -t blob -w --stdin) && -echo "120000 $l symlink" | git update-index --index-info && -git commit -m b-symlink && -git checkout b-file && -echo plain-file > symlink && -git add symlink && -git commit -m b-file' - -test_expect_success \ -'merge master into b-symlink, which has a different symbolic link' ' -git checkout b-symlink && -test_must_fail git merge master' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' - -test_expect_success \ -'merge master into b-file, which has a file instead of a symbolic link' ' -git reset --hard && git checkout b-file && -test_must_fail git merge master' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' - -test_expect_success \ -'merge b-file, which has a file instead of a symbolic link, into master' ' -git reset --hard && -git checkout master && -test_must_fail git merge b-file' - -test_expect_success \ -'the merge result must be a file' ' -test -f symlink' +test_expect_success 'setup' ' + git config core.symlinks false && + >file && + git add file && + git commit -m initial && + git branch b-symlink && + git branch b-file && + l=$(printf file | git hash-object -t blob -w --stdin) && + echo "120000 $l symlink" | git update-index --index-info && + git commit -m master && + git checkout b-symlink && + l=$(printf file-different | git hash-object -t blob -w --stdin) && + echo "120000 $l symlink" | git update-index --index-info && + git commit -m b-symlink && + git checkout b-file && + echo plain-file >symlink && + git add symlink && + git commit -m b-file +' + +test_expect_success 'merge master into b-symlink, which has a different symbolic link' ' + git checkout b-symlink && + test_must_fail git merge master +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' + +test_expect_success 'merge master into b-file, which has a file instead of a symbolic link' ' + git reset --hard && + git checkout b-file && + test_must_fail git merge master +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' + +test_expect_success 'merge b-file, which has a file instead of a symbolic link, into master' ' + git reset --hard && + git checkout master && + test_must_fail git merge b-file +' + +test_expect_success 'the merge result must be a file' ' + test_path_is_file symlink +' test_done diff --git a/t/t6026-merge-attr.sh b/t/t6026-merge-attr.sh index 8f9b48a..5900358 100755 --- a/t/t6026-merge-attr.sh +++ b/t/t6026-merge-attr.sh @@ -32,7 +32,29 @@ test_expect_success setup ' test_tick && git commit -m Side && - git tag anchor + git tag anchor && + + cat >./custom-merge <<-\EOF && + #!/bin/sh + + orig="$1" ours="$2" theirs="$3" exit="$4" path=$5 + ( + echo "orig is $orig" + echo "ours is $ours" + echo "theirs is $theirs" + echo "path is $path" + echo "=== orig ===" + cat "$orig" + echo "=== ours ===" + cat "$ours" + echo "=== theirs ===" + cat "$theirs" + ) >"$ours+" + cat "$ours+" >"$ours" + rm -f "$ours+" + exit "$exit" + EOF + chmod +x ./custom-merge ' test_expect_success merge ' @@ -82,28 +104,6 @@ test_expect_success 'retry the merge with longer context' ' grep "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<" actual ' -cat >./custom-merge <<\EOF -#!/bin/sh - -orig="$1" ours="$2" theirs="$3" exit="$4" path=$5 -( - echo "orig is $orig" - echo "ours is $ours" - echo "theirs is $theirs" - echo "path is $path" - echo "=== orig ===" - cat "$orig" - echo "=== ours ===" - cat "$ours" - echo "=== theirs ===" - cat "$theirs" -) >"$ours+" -cat "$ours+" >"$ours" -rm -f "$ours+" -exit "$exit" -EOF -chmod +x ./custom-merge - test_expect_success 'custom merge backend' ' echo "* merge=union" >.gitattributes && diff --git a/t/t6030-bisect-porcelain.sh b/t/t6030-bisect-porcelain.sh index f84ff94..821a0c8 100755 --- a/t/t6030-bisect-porcelain.sh +++ b/t/t6030-bisect-porcelain.sh @@ -482,7 +482,7 @@ test_expect_success 'optimized merge base checks' ' git bisect good > my_bisect_log2.txt && test -f ".git/BISECT_ANCESTORS_OK" && test "$HASH6" = $(git rev-parse --verify HEAD) && - git bisect bad > my_bisect_log3.txt && + git bisect bad && git bisect good "$A_HASH" > my_bisect_log4.txt && test_i18ngrep "merge base must be tested" my_bisect_log4.txt && test_must_fail test -f ".git/BISECT_ANCESTORS_OK" @@ -615,6 +615,7 @@ test_expect_success 'broken branch creation' ' git add missing/MISSING && git commit -m "6(broken): Added file that will be deleted" && git tag BROKEN_HASH6 && + deleted=$(git rev-parse --verify HEAD:missing) && add_line_into_file "7(broken): second line on a broken branch" hello2 && git tag BROKEN_HASH7 && add_line_into_file "8(broken): third line on a broken branch" hello2 && @@ -622,12 +623,12 @@ test_expect_success 'broken branch creation' ' git rm missing/MISSING && git commit -m "9(broken): Remove missing file" && git tag BROKEN_HASH9 && - rm .git/objects/39/f7e61a724187ab767d2e08442d9b6b9dab587d + rm .git/objects/$(test_oid_to_path $deleted) ' echo "" > expected.ok cat > expected.missing-tree.default <<EOF -fatal: unable to read tree 39f7e61a724187ab767d2e08442d9b6b9dab587d +fatal: unable to read tree $deleted EOF test_expect_success 'bisect fails if tree is broken on start commit' ' @@ -681,7 +682,7 @@ test_expect_success 'bisect: --no-checkout - target in breakage' ' check_same BROKEN_HASH6 BISECT_HEAD && git bisect bad BISECT_HEAD && check_same BROKEN_HASH5 BISECT_HEAD && - git bisect good BISECT_HEAD && + test_must_fail git bisect good BISECT_HEAD && check_same BROKEN_HASH6 bisect/bad && git bisect reset ' @@ -692,7 +693,7 @@ test_expect_success 'bisect: --no-checkout - target after breakage' ' check_same BROKEN_HASH6 BISECT_HEAD && git bisect good BISECT_HEAD && check_same BROKEN_HASH8 BISECT_HEAD && - git bisect good BISECT_HEAD && + test_must_fail git bisect good BISECT_HEAD && check_same BROKEN_HASH9 bisect/bad && git bisect reset ' @@ -701,7 +702,7 @@ test_expect_success 'bisect: demonstrate identification of damage boundary' " git bisect reset && git checkout broken && git bisect start broken master --no-checkout && - git bisect run \"\$SHELL_PATH\" -c ' + test_must_fail git bisect run \"\$SHELL_PATH\" -c ' GOOD=\$(git for-each-ref \"--format=%(objectname)\" refs/bisect/good-*) && git rev-list --objects BISECT_HEAD --not \$GOOD >tmp.\$\$ && git pack-objects --stdout >/dev/null < tmp.\$\$ @@ -713,12 +714,12 @@ test_expect_success 'bisect: demonstrate identification of damage boundary' " " cat > expected.bisect-log <<EOF -# bad: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# good: [7b7f204a749c3125d5224ed61ea2ae1187ad046f] Add <2: A new day for git> into <hello>. -git bisect start '32a594a3fdac2d57cf6d02987e30eec68511498c' '7b7f204a749c3125d5224ed61ea2ae1187ad046f' -# good: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. -git bisect good 3de952f2416b6084f557ec417709eac740c6818c -# first bad commit: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. +# bad: [$HASH4] Add <4: Ciao for now> into <hello>. +# good: [$HASH2] Add <2: A new day for git> into <hello>. +git bisect start '$HASH4' '$HASH2' +# good: [$HASH3] Add <3: Another new day for git> into <hello>. +git bisect good $HASH3 +# first bad commit: [$HASH4] Add <4: Ciao for now> into <hello>. EOF test_expect_success 'bisect log: successful result' ' @@ -731,14 +732,14 @@ test_expect_success 'bisect log: successful result' ' ' cat > expected.bisect-skip-log <<EOF -# bad: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# good: [7b7f204a749c3125d5224ed61ea2ae1187ad046f] Add <2: A new day for git> into <hello>. -git bisect start '32a594a3fdac2d57cf6d02987e30eec68511498c' '7b7f204a749c3125d5224ed61ea2ae1187ad046f' -# skip: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. -git bisect skip 3de952f2416b6084f557ec417709eac740c6818c +# bad: [$HASH4] Add <4: Ciao for now> into <hello>. +# good: [$HASH2] Add <2: A new day for git> into <hello>. +git bisect start '$HASH4' '$HASH2' +# skip: [$HASH3] Add <3: Another new day for git> into <hello>. +git bisect skip $HASH3 # only skipped commits left to test -# possible first bad commit: [32a594a3fdac2d57cf6d02987e30eec68511498c] Add <4: Ciao for now> into <hello>. -# possible first bad commit: [3de952f2416b6084f557ec417709eac740c6818c] Add <3: Another new day for git> into <hello>. +# possible first bad commit: [$HASH4] Add <4: Ciao for now> into <hello>. +# possible first bad commit: [$HASH3] Add <3: Another new day for git> into <hello>. EOF test_expect_success 'bisect log: only skip commits left' ' @@ -802,7 +803,7 @@ test_expect_success 'bisect terms needs 0 or 1 argument' ' test_must_fail git bisect terms only-one && test_must_fail git bisect terms 1 2 && test_must_fail git bisect terms 2>actual && - echo "no terms defined" >expected && + echo "error: no terms defined" >expected && test_i18ncmp expected actual ' diff --git a/t/t6034-merge-rename-nocruft.sh b/t/t6034-merge-rename-nocruft.sh index 89871aa..a25e730 100755 --- a/t/t6034-merge-rename-nocruft.sh +++ b/t/t6034-merge-rename-nocruft.sh @@ -3,74 +3,73 @@ test_description='Merge-recursive merging renames' . ./test-lib.sh -test_expect_success setup \ -' -cat >A <<\EOF && -a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa -b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb -c cccccccccccccccccccccccccccccccccccccccccccccccc -d dddddddddddddddddddddddddddddddddddddddddddddddd -e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee -f ffffffffffffffffffffffffffffffffffffffffffffffff -g gggggggggggggggggggggggggggggggggggggggggggggggg -h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh -i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii -j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj -k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk -l llllllllllllllllllllllllllllllllllllllllllllllll -m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm -n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn -o oooooooooooooooooooooooooooooooooooooooooooooooo -EOF +test_expect_success 'setup' ' + cat >A <<-\EOF && + a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa + b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb + c cccccccccccccccccccccccccccccccccccccccccccccccc + d dddddddddddddddddddddddddddddddddddddddddddddddd + e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee + f ffffffffffffffffffffffffffffffffffffffffffffffff + g gggggggggggggggggggggggggggggggggggggggggggggggg + h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh + i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii + j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj + k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk + l llllllllllllllllllllllllllllllllllllllllllllllll + m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm + n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn + o oooooooooooooooooooooooooooooooooooooooooooooooo + EOF -cat >M <<\EOF && -A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA -B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB -C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC -D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD -E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE -F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG -H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH -I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII -J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ -K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK -L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL -M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM -N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN -O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO -EOF + cat >M <<-\EOF && + A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA + B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB + C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC + D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD + E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE + F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF + G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG + H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH + I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII + J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ + K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK + L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL + M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM + N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN + O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO + EOF -git add A M && -git commit -m "initial has A and M" && -git branch white && -git branch red && -git branch blue && + git add A M && + git commit -m "initial has A and M" && + git branch white && + git branch red && + git branch blue && -git checkout white && -sed -e "/^g /s/.*/g : white changes a line/" <A >B && -sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && -rm -f A M && -git update-index --add --remove A B M N && -git commit -m "white renames A->B, M->N" && + git checkout white && + sed -e "/^g /s/.*/g : white changes a line/" <A >B && + sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N && + rm -f A M && + git update-index --add --remove A B M N && + git commit -m "white renames A->B, M->N" && -git checkout red && -echo created by red >R && -git update-index --add R && -git commit -m "red creates R" && + git checkout red && + echo created by red >R && + git update-index --add R && + git commit -m "red creates R" && -git checkout blue && -sed -e "/^o /s/.*/g : blue changes a line/" <A >B && -rm -f A && -mv B A && -git update-index A && -git commit -m "blue modify A" && + git checkout blue && + sed -e "/^o /s/.*/g : blue changes a line/" <A >B && + rm -f A && + mv B A && + git update-index A && + git commit -m "blue modify A" && -git checkout master' + git checkout master +' # This test broke in 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae -test_expect_success 'merge white into red (A->B,M->N)' \ -' +test_expect_success 'merge white into red (A->B,M->N)' ' git checkout -b red-white red && git merge white && git write-tree && @@ -82,8 +81,7 @@ test_expect_success 'merge white into red (A->B,M->N)' \ ' # This test broke in 8371234ecaaf6e14fe3f2082a855eff1bbd79ae9 -test_expect_success 'merge blue into white (A->B, mod A, A untracked)' \ -' +test_expect_success 'merge blue into white (A->B, mod A, A untracked)' ' git checkout -b white-blue white && echo dirty >A && git merge blue && diff --git a/t/t6035-merge-dir-to-symlink.sh b/t/t6035-merge-dir-to-symlink.sh index 9324ea4..2eddcc7 100755 --- a/t/t6035-merge-dir-to-symlink.sh +++ b/t/t6035-merge-dir-to-symlink.sh @@ -31,19 +31,19 @@ test_expect_success 'a/b-2/c/d is kept when clobbering symlink b' ' git rm --cached a/b && git commit -m "untracked symlink remains" && git checkout -f start^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success 'checkout should not have deleted a/b-2/c/d' ' git checkout HEAD^0 && git reset --hard master && git checkout start^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success 'setup for merge test' ' git reset --hard && - test -f a/b-2/c/d && + test_path_is_file a/b-2/c/d && echo x > a/x && git add a/x && git commit -m x && @@ -54,7 +54,7 @@ test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (resolv git reset --hard && git checkout baseline^0 && git merge -s resolve master && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -65,7 +65,7 @@ test_expect_success 'Handle D/F conflict, do not lose a/b-2/c/d in merge (recurs git reset --hard && git checkout baseline^0 && git merge -s recursive master && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -76,7 +76,7 @@ test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (resolv git reset --hard && git checkout master^0 && git merge -s resolve baseline^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -87,7 +87,7 @@ test_expect_success 'Handle F/D conflict, do not lose a/b-2/c/d in merge (recurs git reset --hard && git checkout master^0 && git merge -s recursive baseline^0 && - test -f a/b-2/c/d + test_path_is_file a/b-2/c/d ' test_expect_success SYMLINKS 'a/b was resolved as symlink' ' @@ -99,8 +99,8 @@ test_expect_failure 'do not lose untracked in merge (resolve)' ' git checkout baseline^0 && >a/b/c/e && test_must_fail git merge -s resolve master && - test -f a/b/c/e && - test -f a/b-2/c/d + test_path_is_file a/b/c/e && + test_path_is_file a/b-2/c/d ' test_expect_success 'do not lose untracked in merge (recursive)' ' @@ -108,8 +108,8 @@ test_expect_success 'do not lose untracked in merge (recursive)' ' git checkout baseline^0 && >a/b/c/e && test_must_fail git merge -s recursive master && - test -f a/b/c/e && - test -f a/b-2/c/d + test_path_is_file a/b/c/e && + test_path_is_file a/b-2/c/d ' test_expect_success 'do not lose modifications in merge (resolve)' ' @@ -140,7 +140,7 @@ test_expect_success 'merge should not have D/F conflicts (resolve)' ' git reset --hard && git checkout baseline^0 && git merge -s resolve test2 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' @@ -151,7 +151,7 @@ test_expect_success 'merge should not have D/F conflicts (recursive)' ' git reset --hard && git checkout baseline^0 && git merge -s recursive test2 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' @@ -162,7 +162,7 @@ test_expect_success 'merge should not have F/D conflicts (recursive)' ' git reset --hard && git checkout -b foo test2 && git merge -s recursive baseline^0 && - test -f a/b/c/d + test_path_is_file a/b/c/d ' test_expect_success SYMLINKS 'a/b-2 was resolved as symlink' ' diff --git a/t/t6036-recursive-corner-cases.sh b/t/t6036-recursive-corner-cases.sh index e1cef58..b3bf462 100755 --- a/t/t6036-recursive-corner-cases.sh +++ b/t/t6036-recursive-corner-cases.sh @@ -60,19 +60,16 @@ test_expect_success 'merge simple rename+criss-cross with no modifications' ' test_must_fail git merge -s recursive R2^0 && git ls-files -s >out && - test_line_count = 2 out && + test_line_count = 5 out && git ls-files -u >out && - test_line_count = 2 out && - git ls-files -o >out && test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -136,19 +133,16 @@ test_expect_success 'merge criss-cross + rename merges with basic modification' test_must_fail git merge -s recursive R2^0 && git ls-files -s >out && - test_line_count = 2 out && + test_line_count = 5 out && git ls-files -u >out && - test_line_count = 2 out && - git ls-files -o >out && test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && git rev-parse >expect \ - L2:three R2:three \ L2:three R2:three && git rev-parse >actual \ :2:three :3:three && - git hash-object >>actual \ - three~HEAD three~R2^0 && test_cmp expect actual ) ' @@ -185,7 +179,7 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git branch B && git checkout -b C && echo 10 >>a && - echo "other content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 foobar >new_a && git add a new_a && test_tick && git commit -m C && @@ -195,14 +189,14 @@ test_expect_success 'setup differently handled merges of rename/add conflict' ' git checkout B^0 && test_must_fail git merge C && - git clean -f && + git show :2:new_a >new_a && + git add new_a && test_tick && git commit -m D && git tag D && git checkout C^0 && test_must_fail git merge B && - rm new_a~HEAD new_a && - printf "Incorrectly merged content" >>new_a && + test_write_lines 0 1 2 3 4 5 6 7 bad_merge >new_a && git add -u && test_tick && git commit -m E && git tag E @@ -224,22 +218,96 @@ test_expect_success 'git detects differently handled merges conflict' ' git ls-files -o >out && test_line_count = 1 out && - git rev-parse >expect \ - D:new_a E:new_a && + git cat-file -p C:new_a >ours && + git cat-file -p C:a >theirs && + >empty && + test_must_fail git merge-file \ + -L "Temporary merge branch 1" \ + -L "" \ + -L "Temporary merge branch 2" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >ours-tweaked && + git hash-object ours-tweaked >expect && + git rev-parse >>expect \ + D:new_a E:new_a && git rev-parse >actual \ - :2:new_a :3:new_a && + :1:new_a :2:new_a :3:new_a && test_cmp expect actual && - git cat-file -p C:new_a >ours && - git cat-file -p B:new_a >theirs && + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "E^0" \ + ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && + git hash-object new_a >actual && + git hash-object ours >expect && + test_cmp expect actual + ) +' + +# Repeat the above testcase with precisely the same setup, other than with +# the two merge bases having different orderings of commit timestamps so +# that they are reversed in the order they are provided to merge-recursive, +# so that we can improve code coverage. +test_expect_success 'git detects differently handled merges conflict, swapped' ' + ( + cd rename-add && + + # Difference #1: Do cleanup from previous testrun + git reset --hard && + git clean -fdqx && + + # Difference #2: Change commit timestamps + btime=$(git log --no-walk --date=raw --format=%cd B | awk "{print \$1}") && + ctime=$(git log --no-walk --date=raw --format=%cd C | awk "{print \$1}") && + newctime=$(($btime+1)) && + git fast-export --no-data --all | sed -e s/$ctime/$newctime/ | git fast-import --force --quiet && + # End of most differences; rest is copy-paste of last test, + # other than swapping C:a and C:new_a due to order switch + + git checkout D^0 && + test_must_fail git merge -s recursive E^0 && + + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 1 out && + + git cat-file -p C:a >ours && + git cat-file -p C:new_a >theirs && >empty && test_must_fail git merge-file \ -L "Temporary merge branch 1" \ -L "" \ -L "Temporary merge branch 2" \ ours empty theirs && + sed -e "s/^\([<=>]\)/\1\1\1/" ours >ours-tweaked && + git hash-object ours-tweaked >expect && + git rev-parse >>expect \ + D:new_a E:new_a && + git rev-parse >actual \ + :1:new_a :2:new_a :3:new_a && + test_cmp expect actual && + + # Test that the two-way merge in new_a is as expected + git cat-file -p D:new_a >ours && + git cat-file -p E:new_a >theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "E^0" \ + ours empty theirs && sed -e "s/^\([<=>]\)/\1\1\1/" ours >expect && - git cat-file -p :1:new_a >actual && + git hash-object new_a >actual && + git hash-object ours >expect && test_cmp expect actual ) ' @@ -1402,4 +1470,351 @@ test_expect_failure 'check conflicting modes for regular file' ' ) ' +# Setup: +# L1---L2 +# / \ / \ +# master X ? +# \ / \ / +# R1---R2 +# +# Where: +# master has two files, named 'b' and 'a' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L2 is a merge of R1 into L1; more on it later. +# R2 is a merge of L1 into R1; more on it later. +# +# X is an auto-generated merge-base used when merging L2 and R2. +# since X is a merge of L1 and R1, it has conflicting versions of each file +# +# More about L2 and R2: +# - both resolve the conflicts in 'b' and 'a' differently +# - L2 renames 'b' to 'm' +# - R2 renames 'a' to 'm' +# +# In the end, in file 'm' we have four different conflicting files (from +# two versions of 'b' and two of 'a'). In addition, if +# merge.conflictstyle is diff3, then the base version also has +# conflict markers of its own, leading to a total of three levels of +# conflict markers. This is a pretty weird corner case, but we just want +# to ensure that we handle it as well as practical. + +test_expect_success 'setup nested conflicts' ' + test_create_repo nested_conflicts && + ( + cd nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >initial && + + cp initial b_L1 && + cp initial b_R1 && + cp initial b_L2 && + cp initial b_R2 && + cp initial a_L1 && + cp initial a_R1 && + cp initial a_L2 && + cp initial a_R2 && + + test_write_lines b b_L1 >>b_L1 && + test_write_lines b b_R1 >>b_R1 && + test_write_lines b b_L2 >>b_L2 && + test_write_lines b b_R2 >>b_R2 && + test_write_lines a a_L1 >>a_L1 && + test_write_lines a a_R1 >>a_R1 && + test_write_lines a a_L2 >>a_L2 && + test_write_lines a a_R2 >>a_R2 && + + # Setup original commit (or merge-base), consisting of + # files named "b" and "a" + cp initial b && + cp initial a && + echo b >>b && + echo a >>a && + git add b a && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + mv -f b_L1 b && + mv -f a_L1 a && + git add b a && + test_tick && git commit -m "version L1 of files" && + git tag L1 && + + # Handle the right side + git checkout R && + mv -f b_R1 b && + mv -f a_R1 a && + git add b a && + test_tick && git commit -m "version R1 of files" && + git tag R1 && + + # Create first merge on left side + git checkout L && + test_must_fail git merge R1 && + mv -f b_L2 b && + mv -f a_L2 a && + git add b a && + git mv b m && + test_tick && git commit -m "left merge, rename b->m" && + git tag L2 && + + # Create first merge on right side + git checkout R && + test_must_fail git merge L1 && + mv -f b_R2 b && + mv -f a_R2 a && + git add b a && + git mv a m && + test_tick && git commit -m "right merge, rename a->m" && + git tag R2 + ) +' + +test_expect_success 'check nested conflicts' ' + ( + cd nested_conflicts && + + git clean -f && + MASTER=$(git rev-parse --short master) && + git checkout L2^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R2^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Create a and b from virtual merge base X + git cat-file -p master:a >base && + git cat-file -p L1:a >ours && + git cat-file -p R1:a >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "$MASTER" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_a && + + git cat-file -p master:b >base && + git cat-file -p L1:b >ours && + git cat-file -p R1:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "$MASTER" \ + -L "Temporary merge branch 2" \ + ours \ + base \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >vmb_b && + + # Compare :2:m to expected values + git cat-file -p L2:m >ours && + git cat-file -p R2:b >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:m" \ + -L "merged common ancestors:b" \ + -L "R2^0:b" \ + ours \ + vmb_b \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_2 && + git cat-file -p :2:m >actual && + test_cmp m_stage_2 actual && + + # Compare :3:m to expected values + git cat-file -p L2:a >ours && + git cat-file -p R2:m >theirs && + test_must_fail git merge-file --diff3 \ + -L "HEAD:a" \ + -L "merged common ancestors:a" \ + -L "R2^0:m" \ + ours \ + vmb_a \ + theirs && + sed -e "s/^\([<|=>]\)/\1\1/" ours >m_stage_3 && + git cat-file -p :3:m >actual && + test_cmp m_stage_3 actual && + + # Compare m to expected contents + >empty && + cp m_stage_2 expected_final_m && + test_must_fail git merge-file --diff3 \ + -L "HEAD" \ + -L "merged common ancestors" \ + -L "R2^0" \ + expected_final_m \ + empty \ + m_stage_3 && + test_cmp expected_final_m m + ) +' + +# Setup: +# L1---L2---L3 +# / \ / \ / \ +# master X1 X2 ? +# \ / \ / \ / +# R1---R2---R3 +# +# Where: +# master has one file named 'content' +# branches L1 and R1 both modify each of the two files in conflicting ways +# +# L<n> (n>1) is a merge of R<n-1> into L<n-1> +# R<n> (n>1) is a merge of L<n-1> into R<n-1> +# L<n> and R<n> resolve the conflicts differently. +# +# X<n> is an auto-generated merge-base used when merging L<n+1> and R<n+1>. +# By construction, X1 has conflict markers due to conflicting versions. +# X2, due to using merge.conflictstyle=3, has nested conflict markers. +# +# So, merging R3 into L3 using merge.conflictstyle=3 should show the +# nested conflict markers from X2 in the base version -- that means we +# have three levels of conflict markers. Can we distinguish all three? + +test_expect_success 'setup virtual merge base with nested conflicts' ' + test_create_repo virtual_merge_base_has_nested_conflicts && + ( + cd virtual_merge_base_has_nested_conflicts && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >content && + + # Setup original commit + git add content && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Create L1 + git checkout L && + echo left >>content && + git add content && + test_tick && git commit -m "version L1 of content" && + git tag L1 && + + # Create R1 + git checkout R && + echo right >>content && + git add content && + test_tick && git commit -m "version R1 of content" && + git tag R1 && + + # Create L2 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R1 && + git checkout L1 content && + test_tick && git commit -m "version L2 of content" && + git tag L2 && + + # Create R2 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L1 && + git checkout R1 content && + test_tick && git commit -m "version R2 of content" && + git tag R2 && + + # Create L3 + git checkout L && + test_must_fail git -c merge.conflictstyle=diff3 merge R2 && + git checkout L1 content && + test_tick && git commit -m "version L3 of content" && + git tag L3 && + + # Create R3 + git checkout R && + test_must_fail git -c merge.conflictstyle=diff3 merge L2 && + git checkout R1 content && + test_tick && git commit -m "version R3 of content" && + git tag R3 + ) +' + +test_expect_success 'check virtual merge base with nested conflicts' ' + ( + cd virtual_merge_base_has_nested_conflicts && + + MASTER=$(git rev-parse --short master) && + git checkout L3^0 && + + # Merge must fail; there is a conflict + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R3^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 3 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Compare :[23]:content to expected values + git rev-parse L1:content R1:content >expect && + git rev-parse :2:content :3:content >actual && + test_cmp expect actual && + + # Imitate X1 merge base, except without long enough conflict + # markers because a subsequent sed will modify them. Put + # result into vmb. + git cat-file -p master:content >base && + git cat-file -p L:content >left && + git cat-file -p R:content >right && + cp left merged-once && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "$MASTER" \ + -L "Temporary merge branch 2" \ + merged-once \ + base \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-once >vmb && + + # Imitate X2 merge base, overwriting vmb. Note that we + # extend both sets of conflict markers to make them longer + # with the sed command. + cp left merged-twice && + test_must_fail git merge-file --diff3 \ + -L "Temporary merge branch 1" \ + -L "merged common ancestors" \ + -L "Temporary merge branch 2" \ + merged-twice \ + vmb \ + right && + sed -e "s/^\([<|=>]\)/\1\1\1/" merged-twice >vmb && + + # Compare :1:content to expected value + git cat-file -p :1:content >actual && + test_cmp vmb actual && + + # Determine expected content in final outer merge, compare to + # what the merge generated. + cp -f left expect && + test_must_fail git merge-file --diff3 \ + -L "HEAD" -L "merged common ancestors" -L "R3^0" \ + expect vmb right && + test_cmp expect content + ) +' + test_done diff --git a/t/t6040-tracking-info.sh b/t/t6040-tracking-info.sh index 716283b..ad1922b 100755 --- a/t/t6040-tracking-info.sh +++ b/t/t6040-tracking-info.sh @@ -38,7 +38,7 @@ test_expect_success setup ' advance h ' -script='s/^..\(b.\) *[0-9a-f]* \(.*\)$/\1 \2/p' +t6040_script='s/^..\(b.\) *[0-9a-f]* \(.*\)$/\1 \2/p' cat >expect <<\EOF b1 [ahead 1, behind 1] d b2 [ahead 1, behind 1] d @@ -53,7 +53,7 @@ test_expect_success 'branch -v' ' cd test && git branch -v ) | - sed -n -e "$script" >actual && + sed -n -e "$t6040_script" >actual && test_i18ncmp expect actual ' @@ -71,7 +71,7 @@ test_expect_success 'branch -vv' ' cd test && git branch -vv ) | - sed -n -e "$script" >actual && + sed -n -e "$t6040_script" >actual && test_i18ncmp expect actual ' @@ -160,6 +160,19 @@ test_expect_success 'status -s -b --no-ahead-behind (diverged from upstream)' ' ' cat >expect <<\EOF +## b1...origin/master [different] +EOF + +test_expect_success 'status.aheadbehind=false status -s -b (diverged from upstream)' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=false status -s -b | head -1 + ) >actual && + test_i18ncmp expect actual +' + +cat >expect <<\EOF On branch b1 Your branch and 'origin/master' have diverged, and have 1 and 1 different commits each, respectively. @@ -174,6 +187,15 @@ test_expect_success 'status --long --branch' ' test_i18ncmp expect actual ' +test_expect_success 'status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=true status --long -b | head -3 + ) >actual && + test_i18ncmp expect actual +' + cat >expect <<\EOF On branch b1 Your branch and 'origin/master' refer to different commits. @@ -188,6 +210,15 @@ test_expect_success 'status --long --branch --no-ahead-behind' ' test_i18ncmp expect actual ' +test_expect_success 'status.aheadbehind=false status --long --branch' ' + ( + cd test && + git checkout b1 >/dev/null && + git -c status.aheadbehind=false status --long -b | head -2 + ) >actual && + test_i18ncmp expect actual +' + cat >expect <<\EOF ## b5...brokenbase [gone] EOF diff --git a/t/t6042-merge-rename-corner-cases.sh b/t/t6042-merge-rename-corner-cases.sh index b97aca7..b047cf1 100755 --- a/t/t6042-merge-rename-corner-cases.sh +++ b/t/t6042-merge-rename-corner-cases.sh @@ -5,7 +5,7 @@ test_description="recursive merge corner cases w/ renames but not criss-crosses" . ./test-lib.sh -test_expect_success 'setup rename/delete + untracked file' ' +test_setup_rename_delete_untracked () { test_create_repo rename-delete-untracked && ( cd rename-delete-untracked && @@ -29,9 +29,10 @@ test_expect_success 'setup rename/delete + untracked file' ' git commit -m track-people-instead-of-objects && echo "Myyy PRECIOUSSS" >ring ) -' +} test_expect_success "Does git preserve Gollum's precious artifact?" ' + test_setup_rename_delete_untracked && ( cd rename-delete-untracked && @@ -49,7 +50,7 @@ test_expect_success "Does git preserve Gollum's precious artifact?" ' # # We should be able to merge B & C cleanly -test_expect_success 'setup rename/modify/add-source conflict' ' +test_setup_rename_modify_add_source () { test_create_repo rename-modify-add-source && ( cd rename-modify-add-source && @@ -70,9 +71,10 @@ test_expect_success 'setup rename/modify/add-source conflict' ' git add a && git commit -m C ) -' +} test_expect_failure 'rename/modify/add-source conflict resolvable' ' + test_setup_rename_modify_add_source && ( cd rename-modify-add-source && @@ -88,7 +90,7 @@ test_expect_failure 'rename/modify/add-source conflict resolvable' ' ) ' -test_expect_success 'setup resolvable conflict missed if rename missed' ' +test_setup_break_detection_1 () { test_create_repo break-detection-1 && ( cd break-detection-1 && @@ -110,9 +112,10 @@ test_expect_success 'setup resolvable conflict missed if rename missed' ' git add a && git commit -m C ) -' +} test_expect_failure 'conflict caused if rename not detected' ' + test_setup_break_detection_1 && ( cd break-detection-1 && @@ -135,7 +138,7 @@ test_expect_failure 'conflict caused if rename not detected' ' ) ' -test_expect_success 'setup conflict resolved wrong if rename missed' ' +test_setup_break_detection_2 () { test_create_repo break-detection-2 && ( cd break-detection-2 && @@ -160,9 +163,10 @@ test_expect_success 'setup conflict resolved wrong if rename missed' ' git add a && git commit -m E ) -' +} test_expect_failure 'missed conflict if rename not detected' ' + test_setup_break_detection_2 && ( cd break-detection-2 && @@ -182,7 +186,7 @@ test_expect_failure 'missed conflict if rename not detected' ' # Commit B: rename a->b # Commit C: rename a->b, add unrelated a -test_expect_success 'setup undetected rename/add-source causes data loss' ' +test_setup_break_detection_3 () { test_create_repo break-detection-3 && ( cd break-detection-3 && @@ -202,9 +206,10 @@ test_expect_success 'setup undetected rename/add-source causes data loss' ' git add a && git commit -m C ) -' +} test_expect_failure 'detect rename/add-source and preserve all data' ' + test_setup_break_detection_3 && ( cd break-detection-3 && @@ -231,6 +236,7 @@ test_expect_failure 'detect rename/add-source and preserve all data' ' ' test_expect_failure 'detect rename/add-source and preserve all data, merge other way' ' + test_setup_break_detection_3 && ( cd break-detection-3 && @@ -256,10 +262,10 @@ test_expect_failure 'detect rename/add-source and preserve all data, merge other ) ' -test_expect_success 'setup content merge + rename/directory conflict' ' - test_create_repo rename-directory-1 && +test_setup_rename_directory () { + test_create_repo rename-directory-$1 && ( - cd rename-directory-1 && + cd rename-directory-$1 && printf "1\n2\n3\n4\n5\n6\n" >file && git add file && @@ -290,11 +296,12 @@ test_expect_success 'setup content merge + rename/directory conflict' ' test_tick && git commit -m left ) -' +} test_expect_success 'rename/directory conflict + clean content merge' ' + test_setup_rename_directory 1a && ( - cd rename-directory-1 && + cd rename-directory-1a && git checkout left-clean^0 && @@ -320,8 +327,9 @@ test_expect_success 'rename/directory conflict + clean content merge' ' ' test_expect_success 'rename/directory conflict + content merge conflict' ' + test_setup_rename_directory 1b && ( - cd rename-directory-1 && + cd rename-directory-1b && git reset --hard && git clean -fdqx && @@ -358,7 +366,7 @@ test_expect_success 'rename/directory conflict + content merge conflict' ' ) ' -test_expect_success 'setup content merge + rename/directory conflict w/ disappearing dir' ' +test_setup_rename_directory_2 () { test_create_repo rename-directory-2 && ( cd rename-directory-2 && @@ -385,9 +393,10 @@ test_expect_success 'setup content merge + rename/directory conflict w/ disappea test_tick && git commit -m left ) -' +} test_expect_success 'disappearing dir in rename/directory conflict handled' ' + test_setup_rename_directory_2 && ( cd rename-directory-2 && @@ -411,6 +420,124 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' ) ' +# Test for basic rename/add-dest conflict, with rename needing content merge: +# Commit O: a +# Commit A: rename a->b, modifying b too +# Commit B: modify a, add different b + +test_setup_rename_with_content_merge_and_add () { + test_create_repo rename-with-content-merge-and-add-$1 && + ( + cd rename-with-content-merge-and-add-$1 && + + test_seq 1 5 >a && + git add a && + git commit -m O && + git tag O && + + git checkout -b A O && + git mv a b && + test_seq 0 5 >b && + git add b && + git commit -m A && + + git checkout -b B O && + echo 6 >>a && + echo hello world >b && + git add a b && + git commit -m B + ) +} + +test_expect_success 'handle rename-with-content-merge vs. add' ' + test_setup_rename_with_content_merge_and_add AB && + ( + cd rename-with-content-merge-and-add-AB && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out && + test_i18ngrep "CONFLICT (rename/add)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Also, make sure both unmerged entries are for "b" + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + test_path_is_file b && + + test_seq 0 6 >tmp && + git hash-object tmp >expect && + git rev-parse B:b >>expect && + git rev-parse >actual \ + :2:b :3:b && + test_cmp expect actual && + + # Test that the two-way merge in b is as expected + git cat-file -p :2:b >>ours && + git cat-file -p :3:b >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + ours empty theirs && + test_cmp ours b + ) +' + +test_expect_success 'handle rename-with-content-merge vs. add, merge other way' ' + test_setup_rename_with_content_merge_and_add BA && + ( + cd rename-with-content-merge-and-add-BA && + + git reset --hard && + git clean -fdx && + + git checkout B^0 && + + test_must_fail git merge -s recursive A^0 >out && + test_i18ngrep "CONFLICT (rename/add)" out && + + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Also, make sure both unmerged entries are for "b" + git ls-files -u b >out && + test_line_count = 2 out && + git ls-files -o >out && + test_line_count = 1 out && + + test_path_is_missing a && + test_path_is_file b && + + test_seq 0 6 >tmp && + git rev-parse B:b >expect && + git hash-object tmp >>expect && + git rev-parse >actual \ + :2:b :3:b && + test_cmp expect actual && + + # Test that the two-way merge in b is as expected + git cat-file -p :2:b >>ours && + git cat-file -p :3:b >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "A^0" \ + ours empty theirs && + test_cmp ours b + ) +' + # Test for all kinds of things that can go wrong with rename/rename (2to1): # Commit A: new files: a & b # Commit B: rename a->c, modify b @@ -423,7 +550,7 @@ test_expect_success 'disappearing dir in rename/directory conflict handled' ' # * The working copy should have two files, both of form c~<unique>; does it? # * Nothing else should be present. Is anything? -test_expect_success 'setup rename/rename (2to1) + modify/modify' ' +test_setup_rename_rename_2to1 () { test_create_repo rename-rename-2to1 && ( cd rename-rename-2to1 && @@ -446,9 +573,10 @@ test_expect_success 'setup rename/rename (2to1) + modify/modify' ' git add a && git commit -m C ) -' +} test_expect_success 'handle rename/rename (2to1) conflict correctly' ' + test_setup_rename_rename_2to1 && ( cd rename-rename-2to1 && @@ -464,17 +592,28 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' git ls-files -u c >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && test_path_is_missing a && test_path_is_missing b && - test_path_is_file c~HEAD && - test_path_is_file c~C^0 && - git rev-parse >expect \ - C:a B:b && - git hash-object >actual \ - c~HEAD c~C^0 && + git rev-parse >expect \ + C:a B:b && + git rev-parse >actual \ + :2:c :3:c && + test_cmp expect actual && + + # Test that the two-way merge in new_a is as expected + git cat-file -p :2:c >>ours && + git cat-file -p :3:c >>theirs && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "C^0" \ + ours empty theirs && + git hash-object c >actual && + git hash-object ours >expect && test_cmp expect actual ) ' @@ -483,7 +622,7 @@ test_expect_success 'handle rename/rename (2to1) conflict correctly' ' # Commit A: new file: a # Commit B: rename a->b # Commit C: rename a->c -test_expect_success 'setup simple rename/rename (1to2) conflict' ' +test_setup_rename_rename_1to2 () { test_create_repo rename-rename-1to2 && ( cd rename-rename-1to2 && @@ -504,9 +643,10 @@ test_expect_success 'setup simple rename/rename (1to2) conflict' ' test_tick && git commit -m C ) -' +} test_expect_success 'merge has correct working tree contents' ' + test_setup_rename_rename_1to2 && ( cd rename-rename-1to2 && @@ -540,7 +680,7 @@ test_expect_success 'merge has correct working tree contents' ' # # Merging of B & C should NOT be clean; there's a rename/rename conflict -test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' +test_setup_rename_rename_1to2_add_source_1 () { test_create_repo rename-rename-1to2-add-source-1 && ( cd rename-rename-1to2-add-source-1 && @@ -560,9 +700,10 @@ test_expect_success 'setup rename/rename(1to2)/add-source conflict' ' git add a && git commit -m C ) -' +} test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ' + test_setup_rename_rename_1to2_add_source_1 && ( cd rename-rename-1to2-add-source-1 && @@ -587,7 +728,7 @@ test_expect_failure 'detect conflict with rename/rename(1to2)/add-source merge' ) ' -test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' +test_setup_rename_rename_1to2_add_source_2 () { test_create_repo rename-rename-1to2-add-source-2 && ( cd rename-rename-1to2-add-source-2 && @@ -610,9 +751,10 @@ test_expect_success 'setup rename/rename(1to2)/add-source resolvable conflict' ' test_tick && git commit -m two ) -' +} test_expect_failure 'rename/rename/add-source still tracks new a file' ' + test_setup_rename_rename_1to2_add_source_2 && ( cd rename-rename-1to2-add-source-2 && @@ -632,7 +774,7 @@ test_expect_failure 'rename/rename/add-source still tracks new a file' ' ) ' -test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' +test_setup_rename_rename_1to2_add_dest () { test_create_repo rename-rename-1to2-add-dest && ( cd rename-rename-1to2-add-dest && @@ -657,9 +799,10 @@ test_expect_success 'setup rename/rename(1to2)/add-dest conflict' ' test_tick && git commit -m two ) -' +} test_expect_success 'rename/rename/add-dest merge still knows about conflicting file versions' ' + test_setup_rename_rename_1to2_add_dest && ( cd rename-rename-1to2-add-dest && @@ -673,7 +816,7 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting git ls-files -u c >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 5 out && + test_line_count = 1 out && git rev-parse >expect \ A:a C:b B:b C:c B:c && @@ -681,14 +824,27 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting :1:a :2:b :3:b :2:c :3:c && test_cmp expect actual && - git rev-parse >expect \ - C:c B:c C:b B:b && - git hash-object >actual \ - c~HEAD c~B\^0 b~HEAD b~B\^0 && - test_cmp expect actual && + # Record some contents for re-doing merges + git cat-file -p A:a >stuff && + git cat-file -p C:b >important_info && + git cat-file -p B:c >precious_data && + >empty && - test_path_is_missing b && - test_path_is_missing c + # Test the merge in b + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + important_info empty stuff && + test_cmp important_info b && + + # Test the merge in c + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + stuff empty precious_data && + test_cmp stuff c ) ' @@ -698,7 +854,7 @@ test_expect_success 'rename/rename/add-dest merge still knows about conflicting # Commit B: rename foo->bar # Expected: CONFLICT (rename/add/delete), two-way merged bar -test_expect_success 'rad-setup: rename/add/delete conflict' ' +test_setup_rad () { test_create_repo rad && ( cd rad && @@ -720,9 +876,10 @@ test_expect_success 'rad-setup: rename/add/delete conflict' ' git mv foo bar && git commit -m "rename foo to bar" ) -' +} test_expect_failure 'rad-check: rename/add/delete conflict' ' + test_setup_rad && ( cd rad && @@ -764,7 +921,7 @@ test_expect_failure 'rad-check: rename/add/delete conflict' ' # Commit B: rename bar->baz, rm foo # Expected: CONFLICT (rename/rename/delete/delete), two-way merged baz -test_expect_success 'rrdd-setup: rename/rename(2to1)/delete/delete conflict' ' +test_setup_rrdd () { test_create_repo rrdd && ( cd rrdd && @@ -787,9 +944,10 @@ test_expect_success 'rrdd-setup: rename/rename(2to1)/delete/delete conflict' ' git rm foo && git commit -m "Rename bar, remove foo" ) -' +} test_expect_failure 'rrdd-check: rename/rename(2to1)/delete/delete conflict' ' + test_setup_rrdd && ( cd rrdd && @@ -833,7 +991,7 @@ test_expect_failure 'rrdd-check: rename/rename(2to1)/delete/delete conflict' ' # Expected: six CONFLICT(rename/rename) messages, each path in two of the # multi-way merged contents found in two, four, six -test_expect_success 'mod6-setup: chains of rename/rename(1to2) and rename/rename(2to1)' ' +test_setup_mod6 () { test_create_repo mod6 && ( cd mod6 && @@ -869,9 +1027,10 @@ test_expect_success 'mod6-setup: chains of rename/rename(1to2) and rename/rename test_tick && git commit -m "B" ) -' +} test_expect_failure 'mod6-check: chains of rename/rename(1to2) and rename/rename(2to1)' ' + test_setup_mod6 && ( cd mod6 && @@ -937,4 +1096,287 @@ test_expect_failure 'mod6-check: chains of rename/rename(1to2) and rename/rename ) ' +test_conflicts_with_adds_and_renames() { + sideL=$1 + sideR=$2 + + # Setup: + # L + # / \ + # master ? + # \ / + # R + # + # Where: + # Both L and R have files named 'three' which collide. Each of + # the colliding files could have been involved in a rename, in + # which case there was a file named 'one' or 'two' that was + # modified on the opposite side of history and renamed into the + # collision on this side of history. + # + # Questions: + # 1) The index should contain both a stage 2 and stage 3 entry + # for the colliding file. Does it? + # 2) When renames are involved, the content merges are clean, so + # the index should reflect the content merges, not merely the + # version of the colliding file from the prior commit. Does + # it? + # 3) There should be a file in the worktree named 'three' + # containing the two-way merged contents of the content-merged + # versions of 'three' from each of the two colliding + # files. Is it present? + # 4) There should not be any three~* files in the working + # tree + test_setup_collision_conflict () { + #test_expect_success "setup simple $sideL/$sideR conflict" ' + test_create_repo simple_${sideL}_${sideR} && + ( + cd simple_${sideL}_${sideR} && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >file_v1 && + cp file_v1 file_v2 && + echo modification >>file_v2 && + + cp file_v1 file_v3 && + echo more stuff >>file_v3 && + cp file_v3 file_v4 && + echo yet more stuff >>file_v4 && + + # Use a tag to record both these files for simple + # access, and clean out these untracked files + git tag file_v1 $(git hash-object -w file_v1) && + git tag file_v2 $(git hash-object -w file_v2) && + git tag file_v3 $(git hash-object -w file_v3) && + git tag file_v4 $(git hash-object -w file_v4) && + git clean -f && + + # Setup original commit (or merge-base), consisting of + # files named "one" and "two" if renames were involved. + touch irrelevant_file && + git add irrelevant_file && + if [ $sideL = "rename" ] + then + git show file_v1 >one && + git add one + fi && + if [ $sideR = "rename" ] + then + git show file_v3 >two && + git add two + fi && + test_tick && git commit -m initial && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + if [ $sideL = "rename" ] + then + git mv one three + else + git show file_v2 >three && + git add three + fi && + if [ $sideR = "rename" ] + then + git show file_v4 >two && + git add two + fi && + test_tick && git commit -m L && + + # Handle the right side + git checkout R && + if [ $sideL = "rename" ] + then + git show file_v2 >one && + git add one + fi && + if [ $sideR = "rename" ] + then + git mv two three + else + git show file_v4 >three && + git add three + fi && + test_tick && git commit -m R + ) + #' + } + + test_expect_success "check simple $sideL/$sideR conflict" ' + test_setup_collision_conflict && + ( + cd simple_${sideL}_${sideR} && + + git checkout L^0 && + + # Merge must fail; there is a conflict + test_must_fail git merge -s recursive R^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 3 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Nothing should have touched irrelevant_file + git rev-parse >actual \ + :0:irrelevant_file \ + :2:three \ + :3:three && + git rev-parse >expected \ + master:irrelevant_file \ + file_v2 \ + file_v4 && + test_cmp expected actual && + + # Make sure we have the correct merged contents for + # three + git show file_v1 >expected && + cat <<-\EOF >>expected && + <<<<<<< HEAD + modification + ======= + more stuff + yet more stuff + >>>>>>> R^0 + EOF + + test_cmp expected three + ) + ' +} + +test_conflicts_with_adds_and_renames rename rename +test_conflicts_with_adds_and_renames rename add +test_conflicts_with_adds_and_renames add rename +test_conflicts_with_adds_and_renames add add + +# Setup: +# L +# / \ +# master ? +# \ / +# R +# +# Where: +# master has two files, named 'one' and 'two'. +# branches L and R both modify 'one', in conflicting ways. +# branches L and R both modify 'two', in conflicting ways. +# branch L also renames 'one' to 'three'. +# branch R also renames 'two' to 'three'. +# +# So, we have four different conflicting files that all end up at path +# 'three'. +test_setup_nested_conflicts_from_rename_rename () { + test_create_repo nested_conflicts_from_rename_rename && + ( + cd nested_conflicts_from_rename_rename && + + # Create some related files now + for i in $(test_seq 1 10) + do + echo Random base content line $i + done >file_v1 && + + cp file_v1 file_v2 && + cp file_v1 file_v3 && + cp file_v1 file_v4 && + cp file_v1 file_v5 && + cp file_v1 file_v6 && + + echo one >>file_v1 && + echo uno >>file_v2 && + echo eins >>file_v3 && + + echo two >>file_v4 && + echo dos >>file_v5 && + echo zwei >>file_v6 && + + # Setup original commit (or merge-base), consisting of + # files named "one" and "two". + mv file_v1 one && + mv file_v4 two && + git add one two && + test_tick && git commit -m english && + + git branch L && + git branch R && + + # Handle the left side + git checkout L && + git rm one two && + mv -f file_v2 three && + mv -f file_v5 two && + git add two three && + test_tick && git commit -m spanish && + + # Handle the right side + git checkout R && + git rm one two && + mv -f file_v3 one && + mv -f file_v6 three && + git add one three && + test_tick && git commit -m german + ) +} + +test_expect_success 'check nested conflicts from rename/rename(2to1)' ' + test_setup_nested_conflicts_from_rename_rename && + ( + cd nested_conflicts_from_rename_rename && + + git checkout L^0 && + + # Merge must fail; there is a conflict + test_must_fail git merge -s recursive R^0 && + + # Make sure the index has the right number of entries + git ls-files -s >out && + test_line_count = 2 out && + git ls-files -u >out && + test_line_count = 2 out && + # Ensure we have the correct number of untracked files + git ls-files -o >out && + test_line_count = 1 out && + + # Compare :2:three to expected values + git cat-file -p master:one >base && + git cat-file -p L:three >ours && + git cat-file -p R:one >theirs && + test_must_fail git merge-file \ + -L "HEAD:three" -L "" -L "R^0:one" \ + ours base theirs && + sed -e "s/^\([<=>]\)/\1\1/" ours >L-three && + git cat-file -p :2:three >expect && + test_cmp expect L-three && + + # Compare :2:three to expected values + git cat-file -p master:two >base && + git cat-file -p L:two >ours && + git cat-file -p R:three >theirs && + test_must_fail git merge-file \ + -L "HEAD:two" -L "" -L "R^0:three" \ + ours base theirs && + sed -e "s/^\([<=>]\)/\1\1/" ours >R-three && + git cat-file -p :3:three >expect && + test_cmp expect R-three && + + # Compare three to expected contents + >empty && + test_must_fail git merge-file \ + -L "HEAD" -L "" -L "R^0" \ + L-three empty R-three && + test_cmp three L-three + ) +' + test_done diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh index 4a71f17..83792c5 100755 --- a/t/t6043-merge-rename-directories.sh +++ b/t/t6043-merge-rename-directories.sh @@ -38,7 +38,7 @@ test_description="recursive merge with directory renames" # Commit B: z/{b,c,d,e/f} # Expected: y/{b,c,d,e/f} -test_expect_success '1a-setup: Simple directory rename detection' ' +test_setup_1a () { test_create_repo 1a && ( cd 1a && @@ -67,15 +67,16 @@ test_expect_success '1a-setup: Simple directory rename detection' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1a-check: Simple directory rename detection' ' +test_expect_success '1a: Simple directory rename detection' ' + test_setup_1a && ( cd 1a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 4 out && @@ -103,7 +104,7 @@ test_expect_success '1a-check: Simple directory rename detection' ' # Commit B: y/{b,c,d} # Expected: y/{b,c,d,e} -test_expect_success '1b-setup: Merge a directory with another' ' +test_setup_1b () { test_create_repo 1b && ( cd 1b && @@ -134,15 +135,16 @@ test_expect_success '1b-setup: Merge a directory with another' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1b-check: Merge a directory with another' ' +test_expect_success '1b: Merge a directory with another' ' + test_setup_1b && ( cd 1b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -165,7 +167,7 @@ test_expect_success '1b-check: Merge a directory with another' ' # Commit B: z/{b,c,d} # Expected: y/{b,c,d} (because x/d -> z/d -> y/d) -test_expect_success '1c-setup: Transitive renaming' ' +test_setup_1c () { test_create_repo 1c && ( cd 1c && @@ -193,15 +195,16 @@ test_expect_success '1c-setup: Transitive renaming' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1c-check: Transitive renaming' ' +test_expect_success '1c: Transitive renaming' ' + test_setup_1c && ( cd 1c && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 3 out && @@ -227,7 +230,7 @@ test_expect_success '1c-check: Transitive renaming' ' # Note: y/m & z/n should definitely move into x. By the same token, both # y/wham_1 & z/wham_2 should too...giving us a conflict. -test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) conflict' ' +test_setup_1d () { test_create_repo 1d && ( cd 1d && @@ -262,15 +265,16 @@ test_expect_success '1d-setup: Directory renames cause a rename/rename(2to1) con test_tick && git commit -m "B" ) -' +} -test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) conflict' ' +test_expect_success '1d: Directory renames cause a rename/rename(2to1) conflict' ' + test_setup_1d && ( cd 1d && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename)" out && git ls-files -s >out && @@ -278,7 +282,7 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:x/b :0:x/c :0:x/d :0:x/e :0:x/m :0:x/n && @@ -293,15 +297,16 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con A:y/wham B:z/wham && test_cmp expect actual && - test_path_is_missing x/wham && - test_path_is_file x/wham~HEAD && - test_path_is_file x/wham~B^0 && - - git hash-object >actual \ - x/wham~HEAD x/wham~B^0 && - git rev-parse >expect \ - A:y/wham B:z/wham && - test_cmp expect actual + # Test that the two-way merge in x/wham is as expected + git cat-file -p :2:x/wham >expect && + git cat-file -p :3:x/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect x/wham ) ' @@ -312,7 +317,7 @@ test_expect_success '1d-check: Directory renames cause a rename/rename(2to1) con # Commit B: z/{oldb,oldc,d} # Expected: y/{newb,newc,d} -test_expect_success '1e-setup: Renamed directory, with all files being renamed too' ' +test_setup_1e () { test_create_repo 1e && ( cd 1e && @@ -341,15 +346,16 @@ test_expect_success '1e-setup: Renamed directory, with all files being renamed t test_tick && git commit -m "B" ) -' +} -test_expect_success '1e-check: Renamed directory, with all files being renamed too' ' +test_expect_success '1e: Renamed directory, with all files being renamed too' ' + test_setup_1e && ( cd 1e && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -370,7 +376,7 @@ test_expect_success '1e-check: Renamed directory, with all files being renamed t # Commit B: y/{b,c}, x/{d,e,f} # Expected: y/{b,c}, x/{d,e,f,g} -test_expect_success '1f-setup: Split a directory into two other directories' ' +test_setup_1f () { test_create_repo 1f && ( cd 1f && @@ -407,15 +413,16 @@ test_expect_success '1f-setup: Split a directory into two other directories' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1f-check: Split a directory into two other directories' ' +test_expect_success '1f: Split a directory into two other directories' ' + test_setup_1f && ( cd 1f && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -458,7 +465,7 @@ test_expect_success '1f-check: Split a directory into two other directories' ' # Commit A: y/b, w/c # Commit B: z/{b,c,d} # Expected: y/b, w/c, z/d, with warning about z/ -> (y/ vs. w/) conflict -test_expect_success '2a-setup: Directory split into two on one side, with equal numbers of paths' ' +test_setup_2a () { test_create_repo 2a && ( cd 2a && @@ -488,15 +495,16 @@ test_expect_success '2a-setup: Directory split into two on one side, with equal test_tick && git commit -m "B" ) -' +} -test_expect_success '2a-check: Directory split into two on one side, with equal numbers of paths' ' +test_expect_success '2a: Directory split into two on one side, with equal numbers of paths' ' + test_setup_2a && ( cd 2a && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT.*directory rename split" out && git ls-files -s >out && @@ -519,7 +527,7 @@ test_expect_success '2a-check: Directory split into two on one side, with equal # Commit A: y/b, w/c # Commit B: z/{b,c}, x/d # Expected: y/b, w/c, x/d; No warning about z/ -> (y/ vs. w/) conflict -test_expect_success '2b-setup: Directory split into two on one side, with equal numbers of paths' ' +test_setup_2b () { test_create_repo 2b && ( cd 2b && @@ -550,15 +558,16 @@ test_expect_success '2b-setup: Directory split into two on one side, with equal test_tick && git commit -m "B" ) -' +} -test_expect_success '2b-check: Directory split into two on one side, with equal numbers of paths' ' +test_expect_success '2b: Directory split into two on one side, with equal numbers of paths' ' + test_setup_2b && ( cd 2b && git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && git ls-files -s >out && test_line_count = 3 out && @@ -600,7 +609,7 @@ test_expect_success '2b-check: Directory split into two on one side, with equal # Commit A: z/{b,c,d} (no change) # Commit B: y/{b,c}, x/d # Expected: y/{b,c}, x/d -test_expect_success '3a-setup: Avoid implicit rename if involved as source on other side' ' +test_setup_3a () { test_create_repo 3a && ( cd 3a && @@ -631,15 +640,16 @@ test_expect_success '3a-setup: Avoid implicit rename if involved as source on ot test_tick && git commit -m "B" ) -' +} -test_expect_success '3a-check: Avoid implicit rename if involved as source on other side' ' +test_expect_success '3a: Avoid implicit rename if involved as source on other side' ' + test_setup_3a && ( cd 3a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -663,7 +673,7 @@ test_expect_success '3a-check: Avoid implicit rename if involved as source on ot # get it involved in directory rename detection. If it were, we might # end up with CONFLICT:(z/d -> y/d vs. x/d vs. w/d), i.e. a # rename/rename/rename(1to3) conflict, which is just weird. -test_expect_success '3b-setup: Avoid implicit rename if involved as source on current side' ' +test_setup_3b () { test_create_repo 3b && ( cd 3b && @@ -696,15 +706,16 @@ test_expect_success '3b-setup: Avoid implicit rename if involved as source on cu test_tick && git commit -m "B" ) -' +} -test_expect_success '3b-check: Avoid implicit rename if involved as source on current side' ' +test_expect_success '3b: Avoid implicit rename if involved as source on current side' ' + test_setup_3b && ( cd 3b && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep CONFLICT.*rename/rename.*z/d.*x/d.*w/d out && test_i18ngrep ! CONFLICT.*rename/rename.*y/d out && @@ -743,7 +754,7 @@ test_expect_success '3b-check: Avoid implicit rename if involved as source on cu # # What if we were to attempt to do directory rename detection when someone # "mostly" moved a directory but still left some files around, or, -# equivalently, fully renamed a directory in one commmit and then recreated +# equivalently, fully renamed a directory in one commit and then recreated # that directory in a later commit adding some new files and then tried to # merge? # @@ -785,7 +796,7 @@ test_expect_success '3b-check: Avoid implicit rename if involved as source on cu # Expected: y/{b,c,d}, z/{e,f} # NOTE: Even though most files from z moved to y, we don't want f to follow. -test_expect_success '4a-setup: Directory split, with original directory still present' ' +test_setup_4a () { test_create_repo 4a && ( cd 4a && @@ -817,15 +828,16 @@ test_expect_success '4a-setup: Directory split, with original directory still pr test_tick && git commit -m "B" ) -' +} -test_expect_success '4a-check: Directory split, with original directory still present' ' +test_expect_success '4a: Directory split, with original directory still present' ' + test_setup_4a && ( cd 4a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 5 out && @@ -873,7 +885,7 @@ test_expect_success '4a-check: Directory split, with original directory still pr # of history, giving us no way to represent this conflict in the # index. -test_expect_success '5a-setup: Merge directories, other side adds files to original and target' ' +test_setup_5a () { test_create_repo 5a && ( cd 5a && @@ -906,15 +918,16 @@ test_expect_success '5a-setup: Merge directories, other side adds files to origi test_tick && git commit -m "B" ) -' +} -test_expect_success '5a-check: Merge directories, other side adds files to original and target' ' +test_expect_success '5a: Merge directories, other side adds files to original and target' ' + test_setup_5a && ( cd 5a && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT.*implicit dir rename" out && git ls-files -s >out && @@ -940,14 +953,14 @@ test_expect_success '5a-check: Merge directories, other side adds files to origi # Commit B: z/{b,c,d_1,e}, y/d_3 # Expected: y/{b,c,e}, CONFLICT(add/add: y/d_2 vs. y/d_3) # NOTE: If z/d_1 in commit B were to be involved in dir rename detection, as -# we normaly would since z/ is being renamed to y/, then this would be +# we normally would since z/ is being renamed to y/, then this would be # a rename/delete (z/d_1 -> y/d_1 vs. deleted) AND an add/add/add # conflict of y/d_1 vs. y/d_2 vs. y/d_3. Add/add/add is not # representable in the index, so the existence of y/d_3 needs to # cause us to bail on directory rename detection for that path, falling # back to git behavior without the directory rename detection. -test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflict' ' +test_setup_5b () { test_create_repo 5b && ( cd 5b && @@ -980,15 +993,16 @@ test_expect_success '5b-setup: Rename/delete in order to get add/add/add conflic test_tick && git commit -m "B" ) -' +} -test_expect_success '5b-check: Rename/delete in order to get add/add/add conflict' ' +test_expect_success '5b: Rename/delete in order to get add/add/add conflict' ' + test_setup_5b && ( cd 5b && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (add/add).* y/d" out && git ls-files -s >out && @@ -1023,7 +1037,7 @@ test_expect_success '5b-check: Rename/delete in order to get add/add/add conflic # y/d are y/d_2 and y/d_4. We still do the move from z/e to y/e, # though, because it doesn't have anything in the way. -test_expect_success '5c-setup: Transitive rename would cause rename/rename/rename/add/add/add' ' +test_setup_5c () { test_create_repo 5c && ( cd 5c && @@ -1060,15 +1074,16 @@ test_expect_success '5c-setup: Transitive rename would cause rename/rename/renam test_tick && git commit -m "B" ) -' +} -test_expect_success '5c-check: Transitive rename would cause rename/rename/rename/add/add/add' ' +test_expect_success '5c: Transitive rename would cause rename/rename/rename/add/add/add' ' + test_setup_5c && ( cd 5c && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*z/d" out && test_i18ngrep "CONFLICT (add/add).* y/d" out && @@ -1077,7 +1092,7 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam git ls-files -u >out && test_line_count = 6 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:y/b :0:y/c :0:y/e && @@ -1093,9 +1108,9 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam test_cmp expect actual && git hash-object >actual \ - w/d~HEAD w/d~B^0 z/d && + z/d && git rev-parse >expect \ - O:x/d B:w/d O:x/d && + O:x/d && test_cmp expect actual && test_path_is_missing x/d && test_path_is_file y/d && @@ -1112,7 +1127,7 @@ test_expect_success '5c-check: Transitive rename would cause rename/rename/renam # detection for z/d_2, but that doesn't prevent us from applying the # directory rename detection for z/f -> y/f. -test_expect_success '5d-setup: Directory/file/file conflict due to directory rename' ' +test_setup_5d () { test_create_repo 5d && ( cd 5d && @@ -1144,15 +1159,16 @@ test_expect_success '5d-setup: Directory/file/file conflict due to directory ren test_tick && git commit -m "B" ) -' +} -test_expect_success '5d-check: Directory/file/file conflict due to directory rename' ' +test_expect_success '5d: Directory/file/file conflict due to directory rename' ' + test_setup_5d && ( cd 5d && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (file/directory).*y/d" out && git ls-files -s >out && @@ -1204,7 +1220,7 @@ test_expect_success '5d-check: Directory/file/file conflict due to directory ren # them under y/ doesn't accidentally catch z/d and make it look like # it is also involved in a rename/delete conflict. -test_expect_success '6a-setup: Tricky rename/delete' ' +test_setup_6a () { test_create_repo 6a && ( cd 6a && @@ -1234,15 +1250,16 @@ test_expect_success '6a-setup: Tricky rename/delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6a-check: Tricky rename/delete' ' +test_expect_success '6a: Tricky rename/delete' ' + test_setup_6a && ( cd 6a && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out && git ls-files -s >out && @@ -1270,7 +1287,7 @@ test_expect_success '6a-check: Tricky rename/delete' ' # but B did that rename and still decided to put the file into z/, # so we probably shouldn't apply directory rename detection for it. -test_expect_success '6b-setup: Same rename done on both sides' ' +test_setup_6b () { test_create_repo 6b && ( cd 6b && @@ -1299,15 +1316,16 @@ test_expect_success '6b-setup: Same rename done on both sides' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6b-check: Same rename done on both sides' ' +test_expect_success '6b: Same rename done on both sides' ' + test_setup_6b && ( cd 6b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1333,7 +1351,7 @@ test_expect_success '6b-check: Same rename done on both sides' ' # NOTE: Seems obvious, but just checking that the implementation doesn't # "accidentally detect a rename" and give us y/{b,c,d}. -test_expect_success '6c-setup: Rename only done on same side' ' +test_setup_6c () { test_create_repo 6c && ( cd 6c && @@ -1361,15 +1379,16 @@ test_expect_success '6c-setup: Rename only done on same side' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6c-check: Rename only done on same side' ' +test_expect_success '6c: Rename only done on same side' ' + test_setup_6c && ( cd 6c && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1395,7 +1414,7 @@ test_expect_success '6c-check: Rename only done on same side' ' # NOTE: Again, this seems obvious but just checking that the implementation # doesn't "accidentally detect a rename" and give us y/{b,c,d}. -test_expect_success '6d-setup: We do not always want transitive renaming' ' +test_setup_6d () { test_create_repo 6d && ( cd 6d && @@ -1423,15 +1442,16 @@ test_expect_success '6d-setup: We do not always want transitive renaming' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6d-check: We do not always want transitive renaming' ' +test_expect_success '6d: We do not always want transitive renaming' ' + test_setup_6d && ( cd 6d && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -1457,7 +1477,7 @@ test_expect_success '6d-check: We do not always want transitive renaming' ' # doesn't "accidentally detect a rename" and give us y/{b,c} + # add/add conflict on y/d_1 vs y/d_2. -test_expect_success '6e-setup: Add/add from one side' ' +test_setup_6e () { test_create_repo 6e && ( cd 6e && @@ -1486,15 +1506,16 @@ test_expect_success '6e-setup: Add/add from one side' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '6e-check: Add/add from one side' ' +test_expect_success '6e: Add/add from one side' ' + test_setup_6e && ( cd 6e && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -1551,7 +1572,7 @@ test_expect_success '6e-check: Add/add from one side' ' # Expected: y/d, CONFLICT(rename/rename for both z/b and z/c) # NOTE: There's a rename of z/ here, y/ has more renames, so z/d -> y/d. -test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' +test_setup_7a () { test_create_repo 7a && ( cd 7a && @@ -1582,15 +1603,16 @@ test_expect_success '7a-setup: rename-dir vs. rename-dir (NOT split evenly) PLUS test_tick && git commit -m "B" ) -' +} -test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' +test_expect_success '7a: rename-dir vs. rename-dir (NOT split evenly) PLUS add-other-file' ' + test_setup_7a && ( cd 7a && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*z/b.*y/b.*w/b" out && test_i18ngrep "CONFLICT (rename/rename).*z/c.*y/c.*x/c" out && @@ -1622,7 +1644,7 @@ test_expect_success '7a-check: rename-dir vs. rename-dir (NOT split evenly) PLUS # Commit B: z/{b,c,d_1}, w/d_2 # Expected: y/{b,c}, CONFLICT(rename/rename(2to1): x/d_1, w/d_2 -> y_d) -test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive rename' ' +test_setup_7b () { test_create_repo 7b && ( cd 7b && @@ -1654,15 +1676,16 @@ test_expect_success '7b-setup: rename/rename(2to1), but only due to transitive r test_tick && git commit -m "B" ) -' +} -test_expect_success '7b-check: rename/rename(2to1), but only due to transitive rename' ' +test_expect_success '7b: rename/rename(2to1), but only due to transitive rename' ' + test_setup_7b && ( cd 7b && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename)" out && git ls-files -s >out && @@ -1670,7 +1693,7 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 3 out && + test_line_count = 1 out && git rev-parse >actual \ :0:y/b :0:y/c :2:y/d :3:y/d && @@ -1678,15 +1701,16 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r O:z/b O:z/c O:w/d O:x/d && test_cmp expect actual && - test_path_is_missing y/d && - test_path_is_file y/d~HEAD && - test_path_is_file y/d~B^0 && - - git hash-object >actual \ - y/d~HEAD y/d~B^0 && - git rev-parse >expect \ - O:w/d O:x/d && - test_cmp expect actual + # Test that the two-way merge in y/d is as expected + git cat-file -p :2:y/d >expect && + git cat-file -p :3:y/d >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/d ) ' @@ -1700,7 +1724,7 @@ test_expect_success '7b-check: rename/rename(2to1), but only due to transitive r # neither CONFLICT(x/d -> w/d vs. z/d) # nor CONFLiCT x/d -> w/d vs. y/d vs. z/d) -test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may add complexity' ' +test_setup_7c () { test_create_repo 7c && ( cd 7c && @@ -1730,15 +1754,16 @@ test_expect_success '7c-setup: rename/rename(1to...2or3); transitive rename may test_tick && git commit -m "B" ) -' +} -test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may add complexity' ' +test_expect_success '7c: rename/rename(1to...2or3); transitive rename may add complexity' ' + test_setup_7c && ( cd 7c && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/rename).*x/d.*w/d.*y/d" out && git ls-files -s >out && @@ -1764,7 +1789,7 @@ test_expect_success '7c-check: rename/rename(1to...2or3); transitive rename may # Expected: y/{b,c}, CONFLICT(delete x/d vs rename to y/d) # NOTE: z->y so NOT CONFLICT(delete x/d vs rename to z/d) -test_expect_success '7d-setup: transitive rename involved in rename/delete; how is it reported?' ' +test_setup_7d () { test_create_repo 7d && ( cd 7d && @@ -1794,15 +1819,16 @@ test_expect_success '7d-setup: transitive rename involved in rename/delete; how test_tick && git commit -m "B" ) -' +} -test_expect_success '7d-check: transitive rename involved in rename/delete; how is it reported?' ' +test_expect_success '7d: transitive rename involved in rename/delete; how is it reported?' ' + test_setup_7d && ( cd 7d && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && git ls-files -s >out && @@ -1849,7 +1875,7 @@ test_expect_success '7d-check: transitive rename involved in rename/delete; how # see testcases 9c and 9d for further discussion of this issue and # how it's resolved. -test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in the way' ' +test_setup_7e () { test_create_repo 7e && ( cd 7e && @@ -1884,15 +1910,16 @@ test_expect_success '7e-setup: transitive rename in rename/delete AND dirs in th test_tick && git commit -m "B" ) -' +} -test_expect_success '7e-check: transitive rename in rename/delete AND dirs in the way' ' +test_expect_success '7e: transitive rename in rename/delete AND dirs in the way' ' + test_setup_7e && ( cd 7e && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (rename/delete).*x/d.*y/d" out && git ls-files -s >out && @@ -1943,7 +1970,7 @@ test_expect_success '7e-check: transitive rename in rename/delete AND dirs in th # simple rule from section 5 prevents me from handling this as optimally as # we potentially could. -test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' +test_setup_8a () { test_create_repo 8a && ( cd 8a && @@ -1975,15 +2002,16 @@ test_expect_success '8a-setup: Dual-directory rename, one into the others way' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8a-check: Dual-directory rename, one into the others way' ' +test_expect_success '8a: Dual-directory rename, one into the others way' ' + test_setup_8a && ( cd 8a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -2021,7 +2049,7 @@ test_expect_success '8a-check: Dual-directory rename, one into the others way' ' # making us fall back to pre-directory-rename-detection behavior for both # e_1 and e_2. -test_expect_success '8b-setup: Dual-directory rename, one into the others way, with conflicting filenames' ' +test_setup_8b () { test_create_repo 8b && ( cd 8b && @@ -2053,15 +2081,16 @@ test_expect_success '8b-setup: Dual-directory rename, one into the others way, w test_tick && git commit -m "B" ) -' +} -test_expect_success '8b-check: Dual-directory rename, one into the others way, with conflicting filenames' ' +test_expect_success '8b: Dual-directory rename, one into the others way, with conflicting filenames' ' + test_setup_8b && ( cd 8b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -2087,14 +2116,14 @@ test_expect_success '8b-check: Dual-directory rename, one into the others way, w # # Note: It could easily be argued that the correct resolution here is # y/{b,c,e}, CONFLICT(rename/delete: z/d -> y/d vs deleted) -# and that the modifed version of d should be present in y/ after +# and that the modified version of d should be present in y/ after # the merge, just marked as conflicted. Indeed, I previously did # argue that. But applying directory renames to the side of # history where a file is merely modified results in spurious # rename/rename(1to2) conflicts -- see testcase 9h. See also # notes in 8d. -test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' +test_setup_8c () { test_create_repo 8c && ( cd 8c && @@ -2125,15 +2154,16 @@ test_expect_success '8c-setup: modify/delete or rename+modify/delete?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8c-check: modify/delete or rename+modify/delete' ' +test_expect_success '8c: modify/delete or rename+modify/delete' ' + test_setup_8c && ( cd 8c && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "CONFLICT (modify/delete).* z/d" out && git ls-files -s >out && @@ -2173,7 +2203,7 @@ test_expect_success '8c-check: modify/delete or rename+modify/delete' ' # during merging are supposed to be about opposite sides doing things # differently. -test_expect_success '8d-setup: rename/delete...or not?' ' +test_setup_8d () { test_create_repo 8d && ( cd 8d && @@ -2202,15 +2232,16 @@ test_expect_success '8d-setup: rename/delete...or not?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '8d-check: rename/delete...or not?' ' +test_expect_success '8d: rename/delete...or not?' ' + test_setup_8d && ( cd 8d && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2248,7 +2279,7 @@ test_expect_success '8d-check: rename/delete...or not?' ' # about the ramifications of doing that, I didn't know how to rule out # that opening other weird edge and corner cases so I just punted. -test_expect_success '8e-setup: Both sides rename, one side adds to original directory' ' +test_setup_8e () { test_create_repo 8e && ( cd 8e && @@ -2277,15 +2308,16 @@ test_expect_success '8e-setup: Both sides rename, one side adds to original dire test_tick && git commit -m "B" ) -' +} -test_expect_success '8e-check: Both sides rename, one side adds to original directory' ' +test_expect_success '8e: Both sides rename, one side adds to original directory' ' + test_setup_8e && ( cd 8e && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep CONFLICT.*rename/rename.*z/c.*y/c.*w/c out && test_i18ngrep CONFLICT.*rename/rename.*z/b.*y/b.*w/b out && @@ -2331,7 +2363,7 @@ test_expect_success '8e-check: Both sides rename, one side adds to original dire # of which one had the most paths going to it. A naive implementation # of that could take the new file in commit B at z/i to x/w/i or x/i. -test_expect_success '9a-setup: Inner renamed directory within outer renamed directory' ' +test_setup_9a () { test_create_repo 9a && ( cd 9a && @@ -2364,15 +2396,16 @@ test_expect_success '9a-setup: Inner renamed directory within outer renamed dire test_tick && git commit -m "B" ) -' +} -test_expect_success '9a-check: Inner renamed directory within outer renamed directory' ' +test_expect_success '9a: Inner renamed directory within outer renamed directory' ' + test_setup_9a && ( cd 9a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 7 out && @@ -2402,7 +2435,7 @@ test_expect_success '9a-check: Inner renamed directory within outer renamed dire # Commit B: z/{b,c,d_3} # Expected: y/{b,c,d_merged} -test_expect_success '9b-setup: Transitive rename with content merge' ' +test_setup_9b () { test_create_repo 9b && ( cd 9b && @@ -2434,15 +2467,16 @@ test_expect_success '9b-setup: Transitive rename with content merge' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9b-check: Transitive rename with content merge' ' +test_expect_success '9b: Transitive rename with content merge' ' + test_setup_9b && ( cd 9b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2489,7 +2523,7 @@ test_expect_success '9b-check: Transitive rename with content merge' ' # away, then ignore that particular rename from the other side of # history for any implicit directory renames. -test_expect_success '9c-setup: Doubly transitive rename?' ' +test_setup_9c () { test_create_repo 9c && ( cd 9c && @@ -2524,15 +2558,16 @@ test_expect_success '9c-setup: Doubly transitive rename?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9c-check: Doubly transitive rename?' ' +test_expect_success '9c: Doubly transitive rename?' ' + test_setup_9c && ( cd 9c && git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "WARNING: Avoiding applying x -> z rename to x/f" out && git ls-files -s >out && @@ -2577,7 +2612,7 @@ test_expect_success '9c-check: Doubly transitive rename?' ' # simple rules that are consistent with what we need for all the other # testcases and simplifies things for the user. -test_expect_success '9d-setup: N-way transitive rename?' ' +test_setup_9d () { test_create_repo 9d && ( cd 9d && @@ -2612,15 +2647,16 @@ test_expect_success '9d-setup: N-way transitive rename?' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9d-check: N-way transitive rename?' ' +test_expect_success '9d: N-way transitive rename?' ' + test_setup_9d && ( cd 9d && git checkout A^0 && - git merge -s recursive B^0 >out && + git -c merge.directoryRenames=true merge -s recursive B^0 >out && test_i18ngrep "WARNING: Avoiding applying z -> y rename to z/t" out && test_i18ngrep "WARNING: Avoiding applying y -> x rename to y/a" out && test_i18ngrep "WARNING: Avoiding applying x -> w rename to x/b" out && @@ -2651,7 +2687,7 @@ test_expect_success '9d-check: N-way transitive rename?' ' # Expected: combined/{a,b,c,d,e,f,g,h,i,j,k,l}, CONFLICT(Nto1) warnings, # dir1/yo, dir2/yo, dir3/yo, dirN/yo -test_expect_success '9e-setup: N-to-1 whammo' ' +test_setup_9e () { test_create_repo 9e && ( cd 9e && @@ -2694,15 +2730,16 @@ test_expect_success '9e-setup: N-to-1 whammo' ' test_tick && git commit -m "B" ) -' +} -test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' +test_expect_success C_LOCALE_OUTPUT '9e: N-to-1 whammo' ' + test_setup_9e && ( cd 9e && git checkout A^0 && - test_must_fail git merge -s recursive B^0 >out && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out && grep "CONFLICT (implicit dir rename): Cannot map more than one path to combined/yo" out >error_line && grep -q dir1/yo error_line && grep -q dir2/yo error_line && @@ -2743,7 +2780,7 @@ test_expect_success C_LOCALE_OUTPUT '9e-check: N-to-1 whammo' ' # Commit B: goal/{a,b}/$more_files, goal/c # Expected: priority/{a,b}/$more_files, priority/c -test_expect_success '9f-setup: Renamed directory that only contained immediate subdirs' ' +test_setup_9f () { test_create_repo 9f && ( cd 9f && @@ -2772,15 +2809,16 @@ test_expect_success '9f-setup: Renamed directory that only contained immediate s test_tick && git commit -m "B" ) -' +} -test_expect_success '9f-check: Renamed directory that only contained immediate subdirs' ' +test_expect_success '9f: Renamed directory that only contained immediate subdirs' ' + test_setup_9f && ( cd 9f && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -2807,7 +2845,7 @@ test_expect_success '9f-check: Renamed directory that only contained immediate s # Commit B: goal/{a,b}/$more_files, goal/c # Expected: priority/{alpha,bravo}/$more_files, priority/c -test_expect_success '9g-setup: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' +test_setup_9g () { test_create_repo 9g && ( cd 9g && @@ -2839,15 +2877,15 @@ test_expect_success '9g-setup: Renamed directory that only contained immediate s test_tick && git commit -m "B" ) -' +} -test_expect_failure '9g-check: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' +test_expect_failure '9g: Renamed directory that only contained immediate subdirs, immediate subdirs renamed' ' ( cd 9g && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -2875,7 +2913,7 @@ test_expect_failure '9g-check: Renamed directory that only contained immediate s # Expected: y/{b,c}, x/d_2 # NOTE: If we applied the z/ -> y/ rename to z/d, then we'd end up with # a rename/rename(1to2) conflict (z/d -> y/d vs. x/d) -test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' +test_setup_9h () { test_create_repo 9h && ( cd 9h && @@ -2908,15 +2946,16 @@ test_expect_success '9h-setup: Avoid dir rename on merely modified path' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '9h-check: Avoid dir rename on merely modified path' ' +test_expect_success '9h: Avoid dir rename on merely modified path' ' + test_setup_9h && ( cd 9h && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 3 out && @@ -2955,7 +2994,7 @@ test_expect_success '9h-check: Avoid dir rename on merely modified path' ' # Expected: Aborted Merge + # ERROR_MSG(untracked working tree files would be overwritten by merge) -test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' +test_setup_10a () { test_create_repo 10a && ( cd 10a && @@ -2981,9 +3020,10 @@ test_expect_success '10a-setup: Overwrite untracked with normal rename/delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' +test_expect_success '10a: Overwrite untracked with normal rename/delete' ' + test_setup_10a && ( cd 10a && @@ -2991,7 +3031,7 @@ test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' echo very >z/c && echo important >z/d && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "The following untracked working tree files would be overwritten by merge" err && git ls-files -s >out && @@ -3019,7 +3059,7 @@ test_expect_success '10a-check: Overwrite untracked with normal rename/delete' ' # z/c_1 -> z/d_1 rename recorded at stage 3 for y/d + # ERROR_MSG(refusing to lose untracked file at 'y/d') -test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' +test_setup_10b () { test_create_repo 10b && ( cd 10b && @@ -3048,9 +3088,10 @@ test_expect_success '10b-setup: Overwrite untracked with dir rename + delete' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' +test_expect_success '10b: Overwrite untracked with dir rename + delete' ' + test_setup_10b && ( cd 10b && @@ -3059,7 +3100,7 @@ test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' echo important >y/d && echo contents >y/e && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/delete).*Version B\^0 of y/d left in tree at y/d~B\^0" out && test_i18ngrep "Error: Refusing to lose untracked file at y/e; writing to y/e~B\^0 instead" out && @@ -3096,10 +3137,10 @@ test_expect_success '10b-check: Overwrite untracked with dir rename + delete' ' # y/c~B^0 + # ERROR_MSG(Refusing to lose untracked file at y/c) -test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2)' ' - test_create_repo 10c && +test_setup_10c () { + test_create_repo 10c_$1 && ( - cd 10c && + cd 10c_$1 && mkdir z x && echo a >z/a && @@ -3126,16 +3167,17 @@ test_expect_success '10c-setup: Overwrite untracked with dir rename/rename(1to2) test_tick && git commit -m "B" ) -' +} -test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2)' ' +test_expect_success '10c1: Overwrite untracked with dir rename/rename(1to2)' ' + test_setup_10c 1 && ( - cd 10c && + cd 10c_1 && git checkout A^0 && echo important >y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~B\^0 instead" out && @@ -3161,15 +3203,53 @@ test_expect_success '10c-check: Overwrite untracked with dir rename/rename(1to2) ) ' +test_expect_success '10c2: Overwrite untracked with dir rename/rename(1to2), other direction' ' + test_setup_10c 2 && + ( + cd 10c_2 && + + git reset --hard && + git clean -fdqx && + + git checkout B^0 && + mkdir y && + echo important >y/c && + + test_must_fail git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && + test_i18ngrep "CONFLICT (rename/rename)" out && + test_i18ngrep "Refusing to lose untracked file at y/c; adding as y/c~HEAD instead" out && + + git ls-files -s >out && + test_line_count = 6 out && + git ls-files -u >out && + test_line_count = 3 out && + git ls-files -o >out && + test_line_count = 3 out && + + git rev-parse >actual \ + :0:y/a :0:y/b :0:x/d :1:x/c :3:w/c :2:y/c && + git rev-parse >expect \ + O:z/a O:z/b O:x/d O:x/c O:x/c O:x/c && + test_cmp expect actual && + + git hash-object y/c~HEAD >actual && + git rev-parse O:x/c >expect && + test_cmp expect actual && + + echo important >expect && + test_cmp expect y/c + ) +' + # Testcase 10d, Delete untracked w/ dir rename/rename(2to1) # Commit O: z/{a,b,c_1}, x/{d,e,f_2} # Commit A: y/{a,b}, x/{d,e,f_2,wham_1} + untracked y/wham # Commit B: z/{a,b,c_1,wham_2}, y/{d,e} -# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~B^0,wham~HEAD}+ +# Expected: Failed Merge; y/{a,b,d,e} + untracked y/{wham,wham~merged}+ # CONFLICT(rename/rename) z/c_1 vs x/f_2 -> y/wham # ERROR_MSG(Refusing to lose untracked file at y/wham) -test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' +test_setup_10d () { test_create_repo 10d && ( cd 10d && @@ -3201,16 +3281,17 @@ test_expect_success '10d-setup: Delete untracked with dir rename/rename(2to1)' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' +test_expect_success '10d: Delete untracked with dir rename/rename(2to1)' ' + test_setup_10d && ( cd 10d && git checkout A^0 && echo important >y/wham && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose untracked file at y/wham" out && @@ -3219,7 +3300,7 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && git rev-parse >actual \ :0:y/a :0:y/b :0:y/d :0:y/e :2:y/wham :3:y/wham && @@ -3232,11 +3313,16 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' echo important >expect && test_cmp expect y/wham && - git hash-object >actual \ - y/wham~B^0 y/wham~HEAD && - git rev-parse >expect \ - O:x/f O:z/c && - test_cmp expect actual + # Test that the two-way merge in y/wham~merged is as expected + git cat-file -p :2:y/wham >expect && + git cat-file -p :3:y/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/wham~merged ) ' @@ -3246,7 +3332,7 @@ test_expect_success '10d-check: Delete untracked with dir rename/rename(2to1)' ' # Commit B: z/{a,b,c} # Expected: y/{a,b,c} + untracked z/c -test_expect_success '10e-setup: Does git complain about untracked file that is not really in the way?' ' +test_setup_10e () { test_create_repo 10e && ( cd 10e && @@ -3273,9 +3359,9 @@ test_expect_success '10e-setup: Does git complain about untracked file that is n test_tick && git commit -m "B" ) -' +} -test_expect_failure '10e-check: Does git complain about untracked file that is not really in the way?' ' +test_expect_failure '10e: Does git complain about untracked file that is not really in the way?' ' ( cd 10e && @@ -3283,7 +3369,7 @@ test_expect_failure '10e-check: Does git complain about untracked file that is n mkdir z && echo random >z/c && - git merge -s recursive B^0 >out 2>err && + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep ! "following untracked working tree files would be overwritten by merge" err && git ls-files -s >out && @@ -3327,7 +3413,7 @@ test_expect_failure '10e-check: Does git complain about untracked file that is n # z/c~HEAD with contents of B:z/b_v2, # z/c with uncommitted mods on top of A:z/c_v1 -test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' ' +test_setup_11a () { test_create_repo 11a && ( cd 11a && @@ -3354,16 +3440,17 @@ test_expect_success '11a-setup: Avoid losing dirty contents with simple rename' test_tick && git commit -m "B" ) -' +} -test_expect_success '11a-check: Avoid losing dirty contents with simple rename' ' +test_expect_success '11a: Avoid losing dirty contents with simple rename' ' + test_setup_11a && ( cd 11a && git checkout A^0 && echo stuff >>z/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && test_seq 1 10 >expected && @@ -3397,7 +3484,7 @@ test_expect_success '11a-check: Avoid losing dirty contents with simple rename' # ERROR_MSG(Refusing to lose dirty file at z/c) -test_expect_success '11b-setup: Avoid losing dirty file involved in directory rename' ' +test_setup_11b () { test_create_repo 11b && ( cd 11b && @@ -3426,16 +3513,17 @@ test_expect_success '11b-setup: Avoid losing dirty file involved in directory re test_tick && git commit -m "B" ) -' +} -test_expect_success '11b-check: Avoid losing dirty file involved in directory rename' ' +test_expect_success '11b: Avoid losing dirty file involved in directory rename' ' + test_setup_11b && ( cd 11b && git checkout A^0 && echo stuff >>z/c && - git merge -s recursive B^0 >out 2>err && + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && grep -q stuff z/c && @@ -3471,7 +3559,7 @@ test_expect_success '11b-check: Avoid losing dirty file involved in directory re # Expected: Abort_msg("following files would be overwritten by merge") + # y/c left untouched (still has uncommitted mods) -test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conflict' ' +test_setup_11c () { test_create_repo 11c && ( cd 11c && @@ -3501,16 +3589,17 @@ test_expect_success '11c-setup: Avoid losing not-uptodate with rename + D/F conf test_tick && git commit -m "B" ) -' +} -test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conflict' ' +test_expect_success '11c: Avoid losing not-uptodate with rename + D/F conflict' ' + test_setup_11c && ( cd 11c && git checkout A^0 && echo stuff >>y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "following files would be overwritten by merge" err && grep -q stuff y/c && @@ -3537,7 +3626,7 @@ test_expect_success '11c-check: Avoid losing not-uptodate with rename + D/F conf # Warning_Msg("Refusing to lose dirty file at z/c) + # y/{a,c~HEAD,c/d}, x/b, now-untracked z/c_v1 with uncommitted mods -test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conflict' ' +test_setup_11d () { test_create_repo 11d && ( cd 11d && @@ -3568,16 +3657,17 @@ test_expect_success '11d-setup: Avoid losing not-uptodate with rename + D/F conf test_tick && git commit -m "B" ) -' +} -test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conflict' ' +test_expect_success '11d: Avoid losing not-uptodate with rename + D/F conflict' ' + test_setup_11d && ( cd 11d && git checkout A^0 && echo stuff >>z/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "Refusing to lose dirty file at z/c" out && grep -q stuff z/c && @@ -3615,7 +3705,7 @@ test_expect_success '11d-check: Avoid losing not-uptodate with rename + D/F conf # y/c~HEAD has A:y/c_2 contents # y/c has dirty file from before merge -test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' +test_setup_11e () { test_create_repo 11e && ( cd 11e && @@ -3647,16 +3737,17 @@ test_expect_success '11e-setup: Avoid deleting not-uptodate with dir rename/rena test_tick && git commit -m "B" ) -' +} -test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' +test_expect_success '11e: Avoid deleting not-uptodate with dir rename/rename(1to2)/add' ' + test_setup_11e && ( cd 11e && git checkout A^0 && echo mods >>y/c && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose dirty file at y/c" out && @@ -3665,7 +3756,7 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena git ls-files -u >out && test_line_count = 4 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && echo different >expected && echo mods >>expected && @@ -3677,11 +3768,17 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena O:z/a O:z/b O:x/d O:x/c O:x/c A:y/c O:x/c && test_cmp expect actual && - git hash-object >actual \ - y/c~B^0 y/c~HEAD && - git rev-parse >expect \ - O:x/c A:y/c && - test_cmp expect actual + # See if y/c~merged has expected contents; requires manually + # doing the expected file merge + git cat-file -p A:y/c >c1 && + git cat-file -p B:z/c >c2 && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + c1 empty c2 && + test_cmp c1 y/c~merged ) ' @@ -3689,12 +3786,12 @@ test_expect_success '11e-check: Avoid deleting not-uptodate with dir rename/rena # Commit O: z/{a,b}, x/{c_1,d_2} # Commit A: y/{a,b,wham_1}, x/d_2, except y/wham has uncommitted mods # Commit B: z/{a,b,wham_2}, x/c_1 -# Expected: Failed Merge; y/{a,b} + untracked y/{wham~B^0,wham~B^HEAD} + +# Expected: Failed Merge; y/{a,b} + untracked y/{wham~merged} + # y/wham with dirty changes from before merge + # CONFLICT(rename/rename) x/c vs x/d -> y/wham # ERROR_MSG(Refusing to lose dirty file at y/wham) -test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' +test_setup_11f () { test_create_repo 11f && ( cd 11f && @@ -3723,16 +3820,17 @@ test_expect_success '11f-setup: Avoid deleting not-uptodate with dir rename/rena test_tick && git commit -m "B" ) -' +} -test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' +test_expect_success '11f: Avoid deleting not-uptodate with dir rename/rename(2to1)' ' + test_setup_11f && ( cd 11f && git checkout A^0 && echo important >>y/wham && - test_must_fail git merge -s recursive B^0 >out 2>err && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/rename)" out && test_i18ngrep "Refusing to lose dirty file at y/wham" out && @@ -3741,24 +3839,30 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena git ls-files -u >out && test_line_count = 2 out && git ls-files -o >out && - test_line_count = 4 out && + test_line_count = 3 out && test_seq 1 10 >expected && echo important >>expected && test_cmp expected y/wham && test_must_fail git rev-parse :1:y/wham && - git hash-object >actual \ - y/wham~B^0 y/wham~HEAD && - git rev-parse >expect \ - O:x/d O:x/c && - test_cmp expect actual && git rev-parse >actual \ :0:y/a :0:y/b :2:y/wham :3:y/wham && git rev-parse >expect \ O:z/a O:z/b O:x/c O:x/d && - test_cmp expect actual + test_cmp expect actual && + + # Test that the two-way merge in y/wham~merged is as expected + git cat-file -p :2:y/wham >expect && + git cat-file -p :3:y/wham >other && + >empty && + test_must_fail git merge-file \ + -L "HEAD" \ + -L "" \ + -L "B^0" \ + expect empty other && + test_cmp expect y/wham~merged ) ' @@ -3776,7 +3880,7 @@ test_expect_success '11f-check: Avoid deleting not-uptodate with dir rename/rena # Commit B: node1/{leaf1,leaf2,leaf5}, node2/{leaf3,leaf4,leaf6} # Expected: node1/{leaf1,leaf2,leaf5,node2/{leaf3,leaf4,leaf6}} -test_expect_success '12a-setup: Moving one directory hierarchy into another' ' +test_setup_12a () { test_create_repo 12a && ( cd 12a && @@ -3806,15 +3910,16 @@ test_expect_success '12a-setup: Moving one directory hierarchy into another' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '12a-check: Moving one directory hierarchy into another' ' +test_expect_success '12a: Moving one directory hierarchy into another' ' + test_setup_12a && ( cd 12a && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 6 out && @@ -3854,7 +3959,7 @@ test_expect_success '12a-check: Moving one directory hierarchy into another' ' # To which, I can do no more than shrug my shoulders and say that # even simple rules give weird results when given weird inputs. -test_expect_success '12b-setup: Moving one directory hierarchy into another' ' +test_setup_12b () { test_create_repo 12b && ( cd 12b && @@ -3882,15 +3987,16 @@ test_expect_success '12b-setup: Moving one directory hierarchy into another' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '12b-check: Moving one directory hierarchy into another' ' +test_expect_success '12b: Moving two directory hierarchies into each other' ' + test_setup_12b && ( cd 12b && git checkout A^0 && - git merge -s recursive B^0 && + git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -s >out && test_line_count = 4 out && @@ -3920,7 +4026,7 @@ test_expect_success '12b-check: Moving one directory hierarchy into another' ' # NOTE: This is *exactly* like 12c, except that every path is modified on # each side of the merge. -test_expect_success '12c-setup: Moving one directory hierarchy into another w/ content merge' ' +test_setup_12c () { test_create_repo 12c && ( cd 12c && @@ -3952,15 +4058,16 @@ test_expect_success '12c-setup: Moving one directory hierarchy into another w/ c test_tick && git commit -m "B" ) -' +} -test_expect_success '12c-check: Moving one directory hierarchy into another w/ content merge' ' +test_expect_success '12c: Moving one directory hierarchy into another w/ content merge' ' + test_setup_12c && ( cd 12c && git checkout A^0 && - test_must_fail git merge -s recursive B^0 && + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 && git ls-files -u >out && test_line_count = 12 out && @@ -3995,4 +4102,592 @@ test_expect_success '12c-check: Moving one directory hierarchy into another w/ c ) ' +# Testcase 12d, Rename/merge of subdirectory into the root +# Commit O: a/b/subdir/foo +# Commit A: subdir/foo +# Commit B: a/b/subdir/foo, a/b/bar +# Expected: subdir/foo, bar + +test_setup_12d () { + test_create_repo 12d && + ( + cd 12d && + + mkdir -p a/b/subdir && + test_commit a/b/subdir/foo && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir subdir && + git mv a/b/subdir/foo.t subdir/foo.t && + test_tick && + git commit -m "A" && + + git checkout B && + test_commit a/b/bar + ) +} + +test_expect_success '12d: Rename/merge subdir into the root, variant 1' ' + test_setup_12d && + ( + cd 12d && + + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + + git rev-parse >actual \ + HEAD:subdir/foo.t HEAD:bar.t && + git rev-parse >expect \ + O:a/b/subdir/foo.t B:a/b/bar.t && + test_cmp expect actual && + + git hash-object bar.t >actual && + git rev-parse B:a/b/bar.t >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:a/b/subdir/foo.t && + test_must_fail git rev-parse HEAD:a/b/bar.t && + test_path_is_missing a/ && + test_path_is_file bar.t + ) +' + +# Testcase 12e, Rename/merge of subdirectory into the root +# Commit O: a/b/foo +# Commit A: foo +# Commit B: a/b/foo, a/b/bar +# Expected: foo, bar + +test_setup_12e () { + test_create_repo 12e && + ( + cd 12e && + + mkdir -p a/b && + test_commit a/b/foo && + + git branch O && + git branch A && + git branch B && + + git checkout A && + mkdir subdir && + git mv a/b/foo.t foo.t && + test_tick && + git commit -m "A" && + + git checkout B && + test_commit a/b/bar + ) +} + +test_expect_success '12e: Rename/merge subdir into the root, variant 2' ' + test_setup_12e && + ( + cd 12e && + + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 && + + git ls-files -s >out && + test_line_count = 2 out && + + git rev-parse >actual \ + HEAD:foo.t HEAD:bar.t && + git rev-parse >expect \ + O:a/b/foo.t B:a/b/bar.t && + test_cmp expect actual && + + git hash-object bar.t >actual && + git rev-parse B:a/b/bar.t >expect && + test_cmp expect actual && + + test_must_fail git rev-parse HEAD:a/b/foo.t && + test_must_fail git rev-parse HEAD:a/b/bar.t && + test_path_is_missing a/ && + test_path_is_file bar.t + ) +' + +########################################################################### +# SECTION 13: Checking informational and conflict messages +# +# A year after directory rename detection became the default, it was +# instead decided to report conflicts on the pathname on the basis that +# some users may expect the new files added or moved into a directory to +# be unrelated to all the other files in that directory, and thus that +# directory rename detection is unexpected. Test that the messages printed +# match our expectation. +########################################################################### + +# Testcase 13a, Basic directory rename with newly added files +# Commit O: z/{b,c} +# Commit A: y/{b,c} +# Commit B: z/{b,c,d,e/f} +# Expected: y/{b,c,d,e/f}, with notices/conflicts for both y/d and y/e/f + +test_setup_13a () { + test_create_repo 13a_$1 && + ( + cd 13a_$1 && + + mkdir z && + echo b >z/b && + echo c >z/c && + git add z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + test_tick && + git commit -m "A" && + + git checkout B && + echo d >z/d && + mkdir z/e && + echo f >z/e/f && + git add z/d z/e/f && + test_tick && + git commit -m "B" + ) +} + +test_expect_success '13a(conflict): messages for newly added files' ' + test_setup_13a conflict && + ( + cd 13a_conflict && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*z/e/f.added.in.B^0.*y/e/f out && + test_i18ngrep CONFLICT..file.location.*z/d.added.in.B^0.*y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/[de]" paths && + + test_path_is_missing z/d && + test_path_is_file y/d && + test_path_is_missing z/e/f && + test_path_is_file y/e/f + ) +' + +test_expect_success '13a(info): messages for newly added files' ' + test_setup_13a info && + ( + cd 13a_info && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated:.*z/e/f.added.in.B^0.*y/e/f out && + test_i18ngrep Path.updated:.*z/d.added.in.B^0.*y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/[de]" paths && + + test_path_is_missing z/d && + test_path_is_file y/d && + test_path_is_missing z/e/f && + test_path_is_file y/e/f + ) +' + +# Testcase 13b, Transitive rename with conflicted content merge and default +# "conflict" setting +# (Related to testcase 1c, 9b) +# Commit O: z/{b,c}, x/d_1 +# Commit A: y/{b,c}, x/d_2 +# Commit B: z/{b,c,d_3} +# Expected: y/{b,c,d_merged}, with two conflict messages for y/d, +# one about content, and one about file location + +test_setup_13b () { + test_create_repo 13b_$1 && + ( + cd 13b_$1 && + + mkdir x && + mkdir z && + test_seq 1 10 >x/d && + echo b >z/b && + echo c >z/c && + git add x z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + echo 11 >>x/d && + git add x/d && + test_tick && + git commit -m "A" && + + git checkout B && + echo eleven >>x/d && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +} + +test_expect_success '13b(conflict): messages for transitive rename with conflicted content' ' + test_setup_13b conflict && + ( + cd 13b_conflict && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT.*content.*Merge.conflict.in.y/d out && + test_i18ngrep CONFLICT..file.location.*x/d.renamed.to.z/d.*moved.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +test_expect_success '13b(info): messages for transitive rename with conflicted content' ' + test_setup_13b info && + ( + cd 13b_info && + + git reset --hard && + git checkout A^0 && + + test_must_fail git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT.*content.*Merge.conflict.in.y/d out && + test_i18ngrep Path.updated:.*x/d.renamed.to.z/d.in.B^0.*moving.it.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +# Testcase 13c, Rename/rename(1to1) due to directory rename +# Commit O: z/{b,c}, x/{d,e} +# Commit A: y/{b,c,d}, x/e +# Commit B: z/{b,c,d}, x/e +# Expected: y/{b,c,d}, with info or conflict messages for d ( +# A: renamed x/d -> z/d; B: renamed z/ -> y/ AND renamed x/d to y/d +# One could argue A had partial knowledge of what was done with +# d and B had full knowledge, but that's a slippery slope as +# shown in testcase 13d. + +test_setup_13c () { + test_create_repo 13c_$1 && + ( + cd 13c_$1 && + + mkdir x && + mkdir z && + test_seq 1 10 >x/d && + echo e >x/e && + echo b >z/b && + echo c >z/c && + git add x z && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv z y && + git mv x/d y/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv x/d z/d && + git add z/d && + test_tick && + git commit -m "B" + ) +} + +test_expect_success '13c(conflict): messages for rename/rename(1to1) via transitive rename' ' + test_setup_13c conflict && + ( + cd 13c_conflict && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*x/d.renamed.to.z/d.*moved.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +test_expect_success '13c(info): messages for rename/rename(1to1) via transitive rename' ' + test_setup_13c info && + ( + cd 13c_info && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated:.*x/d.renamed.to.z/d.in.B^0.*moving.it.to.y/d out && + + git ls-files >paths && + ! grep z/ paths && + grep "y/d" paths && + + test_path_is_missing z/d && + test_path_is_file y/d + ) +' + +# Testcase 13d, Rename/rename(1to1) due to directory rename on both sides +# Commit O: a/{z,y}, b/x, c/w +# Commit A: a/z, b/{y,x}, d/w +# Commit B: a/z, d/x, c/{y,w} +# Expected: a/z, d/{y,x,w} with no file location conflict for x +# Easy cases: +# * z is always in a; so it stays in a. +# * x starts in b, only modified on one side to move into d/ +# * w starts in c, only modified on one side to move into d/ +# Hard case: +# * A renames a/y to b/y, and B renames b/->d/ => a/y -> d/y +# * B renames a/y to c/y, and A renames c/->d/ => a/y -> d/y +# No conflict in where a/y ends up, so put it in d/y. + +test_setup_13d () { + test_create_repo 13d_$1 && + ( + cd 13d_$1 && + + mkdir a && + mkdir b && + mkdir c && + echo z >a/z && + echo y >a/y && + echo x >b/x && + echo w >c/w && + git add a b c && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv a/y b/ && + git mv c/ d/ && + test_tick && + git commit -m "A" && + + git checkout B && + git mv a/y c/ && + git mv b/ d/ && + test_tick && + git commit -m "B" + ) +} + +test_expect_success '13d(conflict): messages for rename/rename(1to1) via dual transitive rename' ' + test_setup_13d conflict && + ( + cd 13d_conflict && + + git checkout A^0 && + + test_must_fail git merge -s recursive B^0 >out 2>err && + + test_i18ngrep CONFLICT..file.location.*a/y.renamed.to.b/y.*moved.to.d/y out && + test_i18ngrep CONFLICT..file.location.*a/y.renamed.to.c/y.*moved.to.d/y out && + + git ls-files >paths && + ! grep b/ paths && + ! grep c/ paths && + grep "d/y" paths && + + test_path_is_missing b/y && + test_path_is_missing c/y && + test_path_is_file d/y + ) +' + +test_expect_success '13d(info): messages for rename/rename(1to1) via dual transitive rename' ' + test_setup_13d info && + ( + cd 13d_info && + + git reset --hard && + git checkout A^0 && + + git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && + + test_i18ngrep Path.updated.*a/y.renamed.to.b/y.*moving.it.to.d/y out && + test_i18ngrep Path.updated.*a/y.renamed.to.c/y.*moving.it.to.d/y out && + + git ls-files >paths && + ! grep b/ paths && + ! grep c/ paths && + grep "d/y" paths && + + test_path_is_missing b/y && + test_path_is_missing c/y && + test_path_is_file d/y + ) +' + +# Testcase 13e, directory rename in virtual merge base +# +# This testcase has a slightly different setup than all the above cases, in +# order to include a recursive case: +# +# A C +# o - o +# / \ / \ +# O o X ? +# \ / \ / +# o o +# B D +# +# Commit O: a/{z,y} +# Commit A: b/{z,y} +# Commit B: a/{z,y,x} +# Commit C: b/{z,y,x} +# Commit D: b/{z,y}, a/x +# Expected: b/{z,y,x} (sort of; see below for why this might not be expected) +# +# NOTES: 'X' represents a virtual merge base. With the default of +# directory rename detection yielding conflicts, merging A and B +# results in a conflict complaining about whether 'x' should be +# under 'a/' or 'b/'. However, when creating the virtual merge +# base 'X', since virtual merge bases need to be written out as a +# tree, we cannot have a conflict, so some resolution has to be +# picked. +# +# In choosing the right resolution, it's worth noting here that +# commits C & D are merges of A & B that choose different +# locations for 'x' (i.e. they resolve the conflict differently), +# and so it would be nice when merging C & D if git could detect +# this difference of opinion and report a conflict. But the only +# way to do so that I can think of would be to have the virtual +# merge base place 'x' in some directory other than either 'a/' or +# 'b/', which seems a little weird -- especially since it'd result +# in a rename/rename(1to2) conflict with a source path that never +# existed in any version. +# +# So, for now, when directory rename detection is set to +# 'conflict' just avoid doing directory rename detection at all in +# the recursive case. This will not allow us to detect a conflict +# in the outer merge for this special kind of setup, but it at +# least avoids hitting a BUG(). +# +test_setup_13e () { + test_create_repo 13e && + ( + cd 13e && + + mkdir a && + echo z >a/z && + echo y >a/y && + git add a && + test_tick && + git commit -m "O" && + + git branch O && + git branch A && + git branch B && + + git checkout A && + git mv a/ b/ && + test_tick && + git commit -m "A" && + + git checkout B && + echo x >a/x && + git add a && + test_tick && + git commit -m "B" && + + git branch C A && + git branch D B && + + git checkout C && + test_must_fail git -c merge.directoryRenames=conflict merge B && + git add b/x && + test_tick && + git commit -m "C" && + + + git checkout D && + test_must_fail git -c merge.directoryRenames=conflict merge A && + git add b/x && + mkdir a && + git mv b/x a/x && + test_tick && + git commit -m "D" + ) +} + +test_expect_success '13e: directory rename detection in recursive case' ' + test_setup_13e && + ( + cd 13e && + + git checkout --quiet D^0 && + + git -c merge.directoryRenames=conflict merge -s recursive C^0 >out 2>err && + + test_i18ngrep ! CONFLICT out && + test_i18ngrep ! BUG: err && + test_i18ngrep ! core.dumped err && + test_must_be_empty err && + + git ls-files >paths && + ! grep a/x paths && + grep b/x paths + ) +' + test_done diff --git a/t/t6046-merge-skip-unneeded-updates.sh b/t/t6046-merge-skip-unneeded-updates.sh index 38e24f7..962030e 100755 --- a/t/t6046-merge-skip-unneeded-updates.sh +++ b/t/t6046-merge-skip-unneeded-updates.sh @@ -36,10 +36,10 @@ test_description="merge cases" # Commit B: b_3 # Expected: b_2 -test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' - test_create_repo 1a && +test_setup_1a () { + test_create_repo 1a_$1 && ( - cd 1a && + cd 1a_$1 && test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && git add b && @@ -62,26 +62,25 @@ test_expect_success '1a-setup: Modify(A)/Modify(B), change on B subset of A' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' - test_when_finished "git -C 1a reset --hard" && - test_when_finished "git -C 1a clean -fd" && +test_expect_success '1a-L: Modify(A)/Modify(B), change on B subset of A' ' + test_setup_1a L && ( - cd 1a && + cd 1a_L && git checkout A^0 && - test-tool chmtime =31337 b && - test-tool chmtime -v +0 b >expected-mtime && + test-tool chmtime =-1 b && + test-tool chmtime --get b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped b" out && test_must_be_empty err && - test-tool chmtime -v +0 b >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure b was NOT updated + test-tool chmtime --get b >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -96,17 +95,21 @@ test_expect_success '1a-check-L: Modify(A)/Modify(B), change on B subset of A' ' ) ' -test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' - test_when_finished "git -C 1a reset --hard" && - test_when_finished "git -C 1a clean -fd" && +test_expect_success '1a-R: Modify(A)/Modify(B), change on B subset of A' ' + test_setup_1a R && ( - cd 1a && + cd 1a_R && git checkout B^0 && + test-tool chmtime =-1 b && + test-tool chmtime --get b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep "Auto-merging b" out && + # Make sure b WAS updated + test-tool chmtime --get b >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) && + test_must_be_empty err && git ls-files -s >index_files && @@ -133,10 +136,10 @@ test_expect_success '1a-check-R: Modify(A)/Modify(B), change on B subset of A' ' # Commit B: c_1 # Expected: c_2 -test_expect_success '2a-setup: Modify(A)/rename(B)' ' - test_create_repo 2a && +test_setup_2a () { + test_create_repo 2a_$1 && ( - cd 2a && + cd 2a_$1 && test_seq 1 10 >b && git add b && @@ -158,20 +161,19 @@ test_expect_success '2a-setup: Modify(A)/rename(B)' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' - test_when_finished "git -C 2a reset --hard" && - test_when_finished "git -C 2a clean -fd" && +test_expect_success '2a-L: Modify/rename, merge into modify side' ' + test_setup_2a L && ( - cd 2a && + cd 2a_L && git checkout A^0 && + test_path_is_missing c && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped c" out && - test_must_be_empty err && + test_path_is_file c && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -189,17 +191,21 @@ test_expect_success '2a-check-L: Modify/rename, merge into modify side' ' ) ' -test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' - test_when_finished "git -C 2a reset --hard" && - test_when_finished "git -C 2a clean -fd" && +test_expect_success '2a-R: Modify/rename, merge into rename side' ' + test_setup_2a R && ( - cd 2a && + cd 2a_R && git checkout B^0 && + test-tool chmtime =-1 c && + test-tool chmtime --get c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped c" out && + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) && + test_must_be_empty err && git ls-files -s >index_files && @@ -224,10 +230,10 @@ test_expect_success '2a-check-R: Modify/rename, merge into rename side' ' # Commit B: b_3 # Expected: c_2 -test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_create_repo 2b && +test_setup_2b () { + test_create_repo 2b_$1 && ( - cd 2b && + cd 2b_$1 && test_write_lines 1 2 3 4 5 6 7 8 9 10 >b && git add b && @@ -251,26 +257,24 @@ test_expect_success '2b-setup: Rename+Mod(A)/Mod(B), B mods subset of A' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_when_finished "git -C 2b reset --hard" && - test_when_finished "git -C 2b clean -fd" && +test_expect_success '2b-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_setup_2b L && ( - cd 2b && + cd 2b_L && git checkout A^0 && - test-tool chmtime =31337 c && - test-tool chmtime -v +0 c >expected-mtime && - + test-tool chmtime =-1 c && + test-tool chmtime --get c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped c" out && test_must_be_empty err && - test-tool chmtime -v +0 c >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -288,17 +292,19 @@ test_expect_success '2b-check-L: Rename+Mod(A)/Mod(B), B mods subset of A' ' ) ' -test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' - test_when_finished "git -C 2b reset --hard" && - test_when_finished "git -C 2b clean -fd" && +test_expect_success '2b-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' + test_setup_2b R && ( - cd 2b && + cd 2b_R && git checkout B^0 && + test_path_is_missing c && GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && - test_i18ngrep "Auto-merging c" out && + # Make sure c now present (and thus was updated) + test_path_is_file c && + test_must_be_empty err && git ls-files -s >index_files && @@ -332,7 +338,7 @@ test_expect_success '2b-check-R: Rename+Mod(A)/Mod(B), B mods subset of A' ' # skip the update, then we're in trouble. This test verifies we do # not make that particular mistake. -test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' +test_setup_2c () { test_create_repo 2c && ( cd 2c && @@ -358,21 +364,27 @@ test_expect_success '2c-setup: Modify b & add c VS rename b->c' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '2c-check: Modify b & add c VS rename b->c' ' +test_expect_success '2c: Modify b & add c VS rename b->c' ' + test_setup_2c && ( cd 2c && git checkout A^0 && + test-tool chmtime =-1 c && + test-tool chmtime --get c >old-mtime && GIT_MERGE_VERBOSITY=3 && export GIT_MERGE_VERBOSITY && test_must_fail git merge -s recursive B^0 >out 2>err && test_i18ngrep "CONFLICT (rename/add): Rename b->c" out && - test_i18ngrep ! "Skipped c" out && - test_must_be_empty err + test_must_be_empty err && + + # Make sure c WAS updated + test-tool chmtime --get c >new-mtime && + test $(cat old-mtime) -lt $(cat new-mtime) # FIXME: rename/add conflicts are horribly broken right now; # when I get back to my patch series fixing it and @@ -428,10 +440,10 @@ test_expect_success '2c-check: Modify b & add c VS rename b->c' ' # Commit B: bq_1, bar/whatever # Expected: bar/{bq_2, whatever} -test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_create_repo 3a && +test_setup_3a () { + test_create_repo 3a_$1 && ( - cd 3a && + cd 3a_$1 && mkdir foo && test_seq 1 10 >bq && @@ -456,21 +468,22 @@ test_expect_success '3a-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3a reset --hard" && - test_when_finished "git -C 3a clean -fd" && +test_expect_success '3a-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3a L && ( - cd 3a && + cd 3a_L && git checkout A^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + test_path_is_missing bar/bq && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -487,19 +500,20 @@ test_expect_success '3a-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' ) ' -test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3a reset --hard" && - test_when_finished "git -C 3a clean -fd" && +test_expect_success '3a-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3a R && ( - cd 3a && + cd 3a_R && git checkout B^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + test_path_is_missing bar/bq && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -522,10 +536,10 @@ test_expect_success '3a-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' # Commit B: bq_2, bar/whatever # Expected: bar/{bq_2, whatever} -test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_create_repo 3b && +test_setup_3b () { + test_create_repo 3b_$1 && ( - cd 3b && + cd 3b_$1 && mkdir foo && test_seq 1 10 >bq && @@ -550,21 +564,22 @@ test_expect_success '3b-setup: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' test_tick && git commit -m "B" ) -' +} -test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3b reset --hard" && - test_when_finished "git -C 3b clean -fd" && +test_expect_success '3b-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3b L && ( - cd 3b && + cd 3b_L && git checkout A^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && + test_path_is_missing bar/bq && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive B^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -581,19 +596,20 @@ test_expect_success '3b-check-L: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' ) ' -test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' - test_when_finished "git -C 3b reset --hard" && - test_when_finished "git -C 3b clean -fd" && +test_expect_success '3b-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' + test_setup_3b R && ( - cd 3b && + cd 3b_R && git checkout B^0 && - GIT_MERGE_VERBOSITY=3 git merge -s recursive A^0 >out 2>err && + test_path_is_missing bar/bq && + GIT_MERGE_VERBOSITY=3 git -c merge.directoryRenames=true merge -s recursive A^0 >out 2>err && - test_i18ngrep ! "Skipped bar/bq" out && test_must_be_empty err && + test_path_is_file bar/bq && + git ls-files -s >index_files && test_line_count = 2 index_files && @@ -621,7 +637,7 @@ test_expect_success '3b-check-R: bq_1->foo/bq_2 on A, foo/->bar/ on B' ' # Working copy: b_4 # Expected: b_2 for merge, b_4 in working copy -test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods present' ' +test_setup_4a () { test_create_repo 4a && ( cd 4a && @@ -647,7 +663,7 @@ test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods test_tick && git commit -m "B" ) -' +} # NOTE: For as long as we continue using unpack_trees() without index_only # set to true, it will error out on a case like this claiming the the locally @@ -655,25 +671,24 @@ test_expect_success '4a-setup: Change on A, change on B subset of A, dirty mods # correct requires doing the merge in-memory first, then realizing that no # updates to the file are necessary, and thus that we can just leave the path # alone. -test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods present' ' - test_when_finished "git -C 4a reset --hard" && - test_when_finished "git -C 4a clean -fd" && +test_expect_failure '4a: Change on A, change on B subset of A, dirty mods present' ' + test_setup_4a && ( cd 4a && git checkout A^0 && echo "File rewritten" >b && - test-tool chmtime =31337 b && - test-tool chmtime -v +0 b >expected-mtime && + test-tool chmtime =-1 b && + test-tool chmtime --get b >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped b" out && test_must_be_empty err && - test-tool chmtime -v +0 b >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure b was NOT updated + test-tool chmtime --get b >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && @@ -695,7 +710,7 @@ test_expect_failure '4a-check: Change on A, change on B subset of A, dirty mods # Working copy: c_4 # Expected: c_2 -test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' +test_setup_4b () { test_create_repo 4b && ( cd 4b && @@ -722,27 +737,26 @@ test_expect_success '4b-setup: Rename+Mod(A)/Mod(B), change on B subset of A, di test_tick && git commit -m "B" ) -' +} -test_expect_success '4b-check: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' - test_when_finished "git -C 4b reset --hard" && - test_when_finished "git -C 4b clean -fd" && +test_expect_success '4b: Rename+Mod(A)/Mod(B), change on B subset of A, dirty mods present' ' + test_setup_4b && ( cd 4b && git checkout A^0 && echo "File rewritten" >c && - test-tool chmtime =31337 c && - test-tool chmtime -v +0 c >expected-mtime && + test-tool chmtime =-1 c && + test-tool chmtime --get c >old-mtime && GIT_MERGE_VERBOSITY=3 git merge -s recursive B^0 >out 2>err && - test_i18ngrep "Skipped c" out && test_must_be_empty err && - test-tool chmtime -v +0 c >actual-mtime && - test_cmp expected-mtime actual-mtime && + # Make sure c was NOT updated + test-tool chmtime --get c >new-mtime && + test_cmp old-mtime new-mtime && git ls-files -s >index_files && test_line_count = 1 index_files && diff --git a/t/t6047-diff3-conflict-markers.sh b/t/t6047-diff3-conflict-markers.sh new file mode 100755 index 0000000..f4655bb --- /dev/null +++ b/t/t6047-diff3-conflict-markers.sh @@ -0,0 +1,211 @@ +#!/bin/sh + +test_description='recursive merge diff3 style conflict markers' + +. ./test-lib.sh + +# Setup: +# L1 +# \ +# ? +# / +# R1 +# +# Where: +# L1 and R1 both have a file named 'content' but have no common history +# + +test_expect_success 'setup no merge base' ' + test_create_repo no_merge_base && + ( + cd no_merge_base && + + git checkout -b L && + test_commit A content A && + + git checkout --orphan R && + test_commit B content B + ) +' + +test_expect_success 'check no merge base' ' + ( + cd no_merge_base && + + git checkout L^0 && + + test_must_fail git -c merge.conflictstyle=diff3 merge --allow-unrelated-histories -s recursive R^0 && + + grep "|||||| empty tree" content + ) +' + +# Setup: +# L1 +# / \ +# master ? +# \ / +# R1 +# +# Where: +# L1 and R1 have modified the same file ('content') in conflicting ways +# + +test_expect_success 'setup unique merge base' ' + test_create_repo unique_merge_base && + ( + cd unique_merge_base && + + test_commit base content "1 +2 +3 +4 +5 +" && + + git branch L && + git branch R && + + git checkout L && + test_commit L content "1 +2 +3 +4 +5 +7" && + + git checkout R && + git rm content && + test_commit R renamed "1 +2 +3 +4 +5 +six" + ) +' + +test_expect_success 'check unique merge base' ' + ( + cd unique_merge_base && + + git checkout L^0 && + MASTER=$(git rev-parse --short master) && + + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R^0 && + + grep "|||||| $MASTER:content" renamed + ) +' + +# Setup: +# L1---L2--L3 +# / \ / \ +# master X1 ? +# \ / \ / +# R1---R2--R3 +# +# Where: +# commits L1 and R1 have modified the same file in non-conflicting ways +# X1 is an auto-generated merge-base used when merging L1 and R1 +# commits L2 and R2 are merges of R1 and L1 into L1 and R1, respectively +# commits L3 and R3 both modify 'content' in conflicting ways +# + +test_expect_success 'setup multiple merge bases' ' + test_create_repo multiple_merge_bases && + ( + cd multiple_merge_bases && + + test_commit initial content "1 +2 +3 +4 +5" && + + git branch L && + git branch R && + + # Create L1 + git checkout L && + test_commit L1 content "0 +1 +2 +3 +4 +5" && + + # Create R1 + git checkout R && + test_commit R1 content "1 +2 +3 +4 +5 +6" && + + # Create L2 + git checkout L && + git merge R1 && + + # Create R2 + git checkout R && + git merge L1 && + + # Create L3 + git checkout L && + test_commit L3 content "0 +1 +2 +3 +4 +5 +A" && + + # Create R3 + git checkout R && + git rm content && + test_commit R3 renamed "0 +2 +3 +4 +5 +six" + ) +' + +test_expect_success 'check multiple merge bases' ' + ( + cd multiple_merge_bases && + + git checkout L^0 && + + test_must_fail git -c merge.conflictstyle=diff3 merge -s recursive R^0 && + + grep "|||||| merged common ancestors:content" renamed + ) +' + +test_expect_success 'rebase --merge describes parent of commit being picked' ' + test_create_repo rebase && + ( + cd rebase && + test_commit base file && + test_commit master file && + git checkout -b side HEAD^ && + test_commit side file && + test_must_fail git -c merge.conflictstyle=diff3 rebase --merge master && + grep "||||||| parent of" file + ) +' + +test_expect_success 'rebase --apply describes fake ancestor base' ' + ( + cd rebase && + git rebase --abort && + test_must_fail git -c merge.conflictstyle=diff3 rebase --apply master && + grep "||||||| constructed merge base" file + ) +' + +test_done diff --git a/t/t6050-replace.sh b/t/t6050-replace.sh index 5d6d318..e7e64e0 100755 --- a/t/t6050-replace.sh +++ b/t/t6050-replace.sh @@ -40,7 +40,8 @@ commit_peeling_shows_parents () test "$_found" = "$_parent" || return 1 _parent_number=$(( $_parent_number + 1 )) done && - test_must_fail git rev-parse --verify $_commit^$_parent_number + test_must_fail git rev-parse --verify $_commit^$_parent_number 2>err && + test_i18ngrep "Needed a single revision" err } commit_has_parents () @@ -133,8 +134,8 @@ test_expect_success 'tag replaced commit' ' test_expect_success '"git fsck" works' ' git fsck master >fsck_master.out && - grep "dangling commit $R" fsck_master.out && - grep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && + test_i18ngrep "dangling commit $R" fsck_master.out && + test_i18ngrep "dangling tag $(cat .git/refs/tags/mytag)" fsck_master.out && test -z "$(git fsck)" ' @@ -393,9 +394,11 @@ test_expect_success 'replace ref cleanup' ' ' test_expect_success '--graft with and without already replaced object' ' - test $(git log --oneline | wc -l) = 7 && + git log --oneline >log && + test_line_count = 7 log && git replace --graft $HASH5 && - test $(git log --oneline | wc -l) = 3 && + git log --oneline >log && + test_line_count = 3 log && commit_has_parents $HASH5 && test_must_fail git replace --graft $HASH5 $HASH4 $HASH3 && git replace --force -g $HASH5 $HASH4 $HASH3 && @@ -403,6 +406,28 @@ test_expect_success '--graft with and without already replaced object' ' git replace -d $HASH5 ' +test_expect_success '--graft using a tag as the new parent' ' + git tag new_parent $HASH5 && + git replace --graft $HASH7 new_parent && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 && + git tag -a -m "annotated new parent tag" annotated_new_parent $HASH5 && + git replace --graft $HASH7 annotated_new_parent && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 +' + +test_expect_success '--graft using a tag as the replaced object' ' + git tag replaced_object $HASH7 && + git replace --graft replaced_object $HASH5 && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 && + git tag -a -m "annotated replaced object tag" annotated_replaced_object $HASH7 && + git replace --graft annotated_replaced_object $HASH5 && + commit_has_parents $HASH7 $HASH5 && + git replace -d $HASH7 +' + test_expect_success GPG 'set up a signed commit' ' echo "line 17" >>hello && echo "line 18" >>hello && diff --git a/t/t6102-rev-list-unexpected-objects.sh b/t/t6102-rev-list-unexpected-objects.sh new file mode 100755 index 0000000..52cde09 --- /dev/null +++ b/t/t6102-rev-list-unexpected-objects.sh @@ -0,0 +1,127 @@ +#!/bin/sh + +test_description='git rev-list should handle unexpected object types' + +. ./test-lib.sh + +test_expect_success 'setup well-formed objects' ' + blob="$(printf "foo" | git hash-object -w --stdin)" && + tree="$(printf "100644 blob $blob\tfoo" | git mktree)" && + commit="$(git commit-tree $tree -m "first commit")" && + git cat-file commit $commit >good-commit +' + +test_expect_success 'setup unexpected non-blob entry' ' + printf "100644 foo\0$(echo $tree | hex2oct)" >broken-tree && + broken_tree="$(git hash-object -w --literally -t tree broken-tree)" +' + +test_expect_failure 'traverse unexpected non-blob entry (lone)' ' + test_must_fail git rev-list --objects $broken_tree +' + +test_expect_success 'traverse unexpected non-blob entry (seen)' ' + test_must_fail git rev-list --objects $tree $broken_tree >output 2>&1 && + test_i18ngrep "is not a blob" output +' + +test_expect_success 'setup unexpected non-tree entry' ' + printf "40000 foo\0$(echo $blob | hex2oct)" >broken-tree && + broken_tree="$(git hash-object -w --literally -t tree broken-tree)" +' + +test_expect_success 'traverse unexpected non-tree entry (lone)' ' + test_must_fail git rev-list --objects $broken_tree +' + +test_expect_success 'traverse unexpected non-tree entry (seen)' ' + test_must_fail git rev-list --objects $blob $broken_tree >output 2>&1 && + test_i18ngrep "is not a tree" output +' + +test_expect_success 'setup unexpected non-commit parent' ' + sed "/^author/ { h; s/.*/parent $blob/; G; }" <good-commit \ + >broken-commit && + broken_commit="$(git hash-object -w --literally -t commit \ + broken-commit)" +' + +test_expect_success 'traverse unexpected non-commit parent (lone)' ' + test_must_fail git rev-list --objects $broken_commit >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'traverse unexpected non-commit parent (seen)' ' + test_must_fail git rev-list --objects $blob $broken_commit \ + >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'setup unexpected non-tree root' ' + sed -e "s/$tree/$blob/" <good-commit >broken-commit && + broken_commit="$(git hash-object -w --literally -t commit \ + broken-commit)" +' + +test_expect_success 'traverse unexpected non-tree root (lone)' ' + test_must_fail git rev-list --objects $broken_commit +' + +test_expect_success 'traverse unexpected non-tree root (seen)' ' + test_must_fail git rev-list --objects $blob $broken_commit \ + >output 2>&1 && + test_i18ngrep "not a tree" output +' + +test_expect_success 'setup unexpected non-commit tag' ' + git tag -a -m "tagged commit" tag $commit && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$commit/$blob/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_success 'traverse unexpected non-commit tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-commit tag (seen)' ' + test_must_fail git rev-list --objects $blob $tag >output 2>&1 && + test_i18ngrep "not a commit" output +' + +test_expect_success 'setup unexpected non-tree tag' ' + git tag -a -m "tagged tree" tag $tree && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$tree/$blob/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_success 'traverse unexpected non-tree tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-tree tag (seen)' ' + test_must_fail git rev-list --objects $blob $tag >output 2>&1 && + test_i18ngrep "not a tree" output +' + +test_expect_success 'setup unexpected non-blob tag' ' + git tag -a -m "tagged blob" tag $blob && + git cat-file tag tag >good-tag && + test_when_finished "git tag -d tag" && + sed -e "s/$blob/$commit/" <good-tag >broken-tag && + tag=$(git hash-object -w --literally -t tag broken-tag) +' + +test_expect_failure 'traverse unexpected non-blob tag (lone)' ' + test_must_fail git rev-list --objects $tag +' + +test_expect_success 'traverse unexpected non-blob tag (seen)' ' + test_must_fail git rev-list --objects $commit $tag >output 2>&1 && + test_i18ngrep "not a blob" output +' + +test_done diff --git a/t/t6112-rev-list-filters-objects.sh b/t/t6112-rev-list-filters-objects.sh index eb32505..de0e5a5 100755 --- a/t/t6112-rev-list-filters-objects.sh +++ b/t/t6112-rev-list-filters-objects.sh @@ -157,6 +157,10 @@ test_expect_success 'verify blob:limit=1m' ' ' # Test sparse:path=<path> filter. +# !!!! +# NOTE: sparse:path filter support has been dropped for security reasons, +# so the tests have been changed to make sure that using it fails. +# !!!! # Use a local file containing a sparse-checkout specification to filter # out blobs not required for the corresponding sparse-checkout. We do not # require sparse-checkout to actually be enabled. @@ -176,37 +180,20 @@ test_expect_success 'setup r3' ' echo sparse1 >pattern2 ' -test_expect_success 'verify sparse:path=pattern1 omits top-level files' ' - git -C r3 ls-files -s sparse1 sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 rev-list --quiet --objects --filter-print-omitted \ - --filter=sparse:path=../pattern1 HEAD >revs && - awk -f print_1.awk revs | - sed "s/~//" | - sort >observed && - - test_cmp expected observed +test_expect_success 'verify sparse:path=pattern1 fails' ' + test_must_fail git -C r3 rev-list --quiet --objects \ + --filter-print-omitted --filter=sparse:path=../pattern1 HEAD ' -test_expect_success 'verify sparse:path=pattern2 omits both sparse2 files' ' - git -C r3 ls-files -s sparse2 dir1/sparse2 >ls_files_result && - awk -f print_2.awk ls_files_result | - sort >expected && - - git -C r3 rev-list --quiet --objects --filter-print-omitted \ - --filter=sparse:path=../pattern2 HEAD >revs && - awk -f print_1.awk revs | - sed "s/~//" | - sort >observed && - - test_cmp expected observed +test_expect_success 'verify sparse:path=pattern2 fails' ' + test_must_fail git -C r3 rev-list --quiet --objects \ + --filter-print-omitted --filter=sparse:path=../pattern2 HEAD ' # Test sparse:oid=<oid-ish> filter. -# Like sparse:path, but we get the sparse-checkout specification from -# a blob rather than a file on disk. +# Use a blob containing a sparse-checkout specification to filter +# out blobs not required for the corresponding sparse-checkout. We do not +# require sparse-checkout to actually be enabled. test_expect_success 'setup r3 part 2' ' echo dir1/ >r3/pattern && @@ -283,7 +270,7 @@ test_expect_success 'verify tree:0 includes trees in "filtered" output' ' # Make sure tree:0 does not iterate through any trees. -test_expect_success 'filter a GIANT tree through tree:0' ' +test_expect_success 'verify skipping tree iteration when not collecting omits' ' GIT_TRACE=1 git -C r3 rev-list \ --objects --filter=tree:0 HEAD 2>filter_trace && grep "Skipping contents of tree [.][.][.]" filter_trace >actual && @@ -291,7 +278,312 @@ test_expect_success 'filter a GIANT tree through tree:0' ' test_line_count = 2 actual && # Make sure no other trees were considered besides the root. - ! grep "Skipping contents of tree [^.]" filter_trace + ! grep "Skipping contents of tree [^.]" filter_trace && + + # Try this again with "combine:". If both sub-filters are skipping + # trees, the composite filter should also skip trees. This is not + # important unless the user does combine:tree:X+tree:Y or another filter + # besides "tree:" is implemented in the future which can skip trees. + GIT_TRACE=1 git -C r3 rev-list \ + --objects --filter=combine:tree:1+tree:3 HEAD 2>filter_trace && + + # Only skip the dir1/ tree, which is shared between the two commits. + grep "Skipping contents of tree " filter_trace >actual && + test_write_lines "Skipping contents of tree dir1/..." >expected && + test_cmp expected actual +' + +# Test tree:# filters. + +expect_has () { + commit=$1 && + name=$2 && + + hash=$(git -C r3 rev-parse $commit:$name) && + grep "^$hash $name$" actual +} + +test_expect_success 'verify tree:1 includes root trees' ' + git -C r3 rev-list --objects --filter=tree:1 HEAD >actual && + + # We should get two root directories and two commits. + expect_has HEAD "" && + expect_has HEAD~1 "" && + test_line_count = 4 actual +' + +test_expect_success 'verify tree:2 includes root trees and immediate children' ' + git -C r3 rev-list --objects --filter=tree:2 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + expect_has HEAD pattern && + expect_has HEAD sparse1 && + expect_has HEAD sparse2 && + + # There are also 2 commit objects + test_line_count = 8 actual +' + +test_expect_success 'verify tree:3 includes everything expected' ' + git -C r3 rev-list --objects --filter=tree:3 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + expect_has HEAD dir1/sparse1 && + expect_has HEAD dir1/sparse2 && + expect_has HEAD pattern && + expect_has HEAD sparse1 && + expect_has HEAD sparse2 && + + # There are also 2 commit objects + test_line_count = 10 actual +' + +test_expect_success 'combine:... for a simple combination' ' + git -C r3 rev-list --objects --filter=combine:tree:2+blob:none HEAD \ + >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual && + + cp actual expected && + + # Try again using repeated --filter - this is equivalent to a manual + # combine with "combine:...+..." + git -C r3 rev-list --objects --filter=combine:tree:2 \ + --filter=blob:none HEAD >actual && + + test_cmp expected actual +' + +test_expect_success 'combine:... with URL encoding' ' + git -C r3 rev-list --objects \ + --filter=combine:tree%3a2+blob:%6Eon%65 HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD dir1 && + + # There are also 2 commit objects + test_line_count = 5 actual +' + +expect_invalid_filter_spec () { + spec="$1" && + err="$2" && + + test_must_fail git -C r3 rev-list --objects --filter="$spec" HEAD \ + >actual 2>actual_stderr && + test_must_be_empty actual && + test_i18ngrep "$err" actual_stderr +} + +test_expect_success 'combine:... while URL-encoding things that should not be' ' + expect_invalid_filter_spec combine%3Atree:2+blob:none \ + "invalid filter-spec" +' + +test_expect_success 'combine: with nothing after the :' ' + expect_invalid_filter_spec combine: "expected something after combine:" +' + +test_expect_success 'parse error in first sub-filter in combine:' ' + expect_invalid_filter_spec combine:tree:asdf+blob:none \ + "expected .tree:<depth>." +' + +test_expect_success 'combine:... with non-encoded reserved chars' ' + expect_invalid_filter_spec combine:tree:2+sparse:@xyz \ + "must escape char in sub-filter-spec: .@." && + expect_invalid_filter_spec combine:tree:2+sparse:\` \ + "must escape char in sub-filter-spec: .\`." && + expect_invalid_filter_spec combine:tree:2+sparse:~abc \ + "must escape char in sub-filter-spec: .\~." +' + +test_expect_success 'validate err msg for "combine:<valid-filter>+"' ' + expect_invalid_filter_spec combine:tree:2+ "expected .tree:<depth>." +' + +test_expect_success 'combine:... with edge-case hex digits: Ff Aa 0 9' ' + git -C r3 rev-list --objects --filter="combine:tree:2+bl%6Fb:n%6fne" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree%3A2+blob%3anone" \ + HEAD >actual && + test_line_count = 5 actual && + git -C r3 rev-list --objects --filter="combine:tree:%30" HEAD >actual && + test_line_count = 2 actual && + git -C r3 rev-list --objects --filter="combine:tree:%39+blob:none" \ + HEAD >actual && + test_line_count = 5 actual +' + +test_expect_success 'add sparse pattern blobs whose paths have reserved chars' ' + cp r3/pattern r3/pattern1+renamed% && + cp r3/pattern "r3/p;at%ter+n" && + cp r3/pattern r3/^~pattern && + git -C r3 add pattern1+renamed% "p;at%ter+n" ^~pattern && + git -C r3 commit -m "add sparse pattern files with reserved chars" +' + +test_expect_success 'combine:... with more than two sub-filters' ' + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern \ + HEAD >actual && + + expect_has HEAD "" && + expect_has HEAD~1 "" && + expect_has HEAD~2 "" && + expect_has HEAD dir1 && + expect_has HEAD dir1/sparse1 && + expect_has HEAD dir1/sparse2 && + + # Should also have 3 commits + test_line_count = 9 actual && + + # Try again, this time making sure the last sub-filter is only + # URL-decoded once. + cp actual expect && + + git -C r3 rev-list --objects \ + --filter=combine:tree:3+blob:limit=40+sparse:oid=master:pattern1%2brenamed%25 \ + HEAD >actual && + test_cmp expect actual && + + # Use the same composite filter again, but with a pattern file name that + # requires encoding multiple characters, and use implicit filter + # combining. + test_when_finished "rm -f trace1" && + GIT_TRACE=$(pwd)/trace1 git -C r3 rev-list --objects \ + --filter=tree:3 --filter=blob:limit=40 \ + --filter=sparse:oid="master:p;at%ter+n" \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:p%3bat%25ter%2bn" \ + trace1 && + + # Repeat the above test, but this time, the characters to encode are in + # the LHS of the combined filter. + test_when_finished "rm -f trace2" && + GIT_TRACE=$(pwd)/trace2 git -C r3 rev-list --objects \ + --filter=sparse:oid=master:^~pattern \ + --filter=tree:3 --filter=blob:limit=40 \ + HEAD >actual && + + test_cmp expect actual && + grep "Add to combine filter-spec: sparse:oid=master:%5e%7epattern" \ + trace2 +' + +# Test provisional omit collection logic with a repo that has objects appearing +# at multiple depths - first deeper than the filter's threshold, then shallow. + +test_expect_success 'setup r4' ' + git init r4 && + + echo foo > r4/foo && + mkdir r4/subdir && + echo bar > r4/subdir/bar && + + mkdir r4/filt && + cp -r r4/foo r4/subdir r4/filt && + + git -C r4 add foo subdir filt && + git -C r4 commit -m "commit msg" +' + +expect_has_with_different_name () { + repo=$1 && + name=$2 && + + hash=$(git -C $repo rev-parse HEAD:$name) && + ! grep "^$hash $name$" actual && + grep "^$hash " actual && + ! grep "~$hash" actual +} + +test_expect_success 'test tree:# filter provisional omit for blob and tree' ' + git -C r4 rev-list --objects --filter-print-omitted --filter=tree:2 \ + HEAD >actual && + expect_has_with_different_name r4 filt/foo && + expect_has_with_different_name r4 filt/subdir +' + +test_expect_success 'verify skipping tree iteration when collecting omits' ' + GIT_TRACE=1 git -C r4 rev-list --filter-print-omitted \ + --objects --filter=tree:0 HEAD 2>filter_trace && + grep "^Skipping contents of tree " filter_trace >actual && + + echo "Skipping contents of tree subdir/..." >expect && + test_cmp expect actual +' + +test_expect_success 'setup r5' ' + git init r5 && + mkdir -p r5/subdir && + + echo 1 >r5/short-root && + echo 12345 >r5/long-root && + echo a >r5/subdir/short-subdir && + echo abcde >r5/subdir/long-subdir && + + git -C r5 add short-root long-root subdir && + git -C r5 commit -m "commit msg" +' + +test_expect_success 'verify collecting omits in combined: filter' ' + # Note that this test guards against the naive implementation of simply + # giving both filters the same "omits" set and expecting it to + # automatically merge them. + git -C r5 rev-list --objects --quiet --filter-print-omitted \ + --filter=combine:tree:2+blob:limit=3 HEAD >actual && + + # Expect 0 trees/commits, 3 blobs omitted (all blobs except short-root) + omitted_1=$(echo 12345 | git hash-object --stdin) && + omitted_2=$(echo a | git hash-object --stdin) && + omitted_3=$(echo abcde | git hash-object --stdin) && + + grep ~$omitted_1 actual && + grep ~$omitted_2 actual && + grep ~$omitted_3 actual && + test_line_count = 3 actual +' + +# Test tree:<depth> where a tree is iterated to twice - once where a subentry is +# too deep to be included, and again where the blob inside it is shallow enough +# to be included. This makes sure we don't use LOFR_MARK_SEEN incorrectly (we +# can't use it because a tree can be iterated over again at a lower depth). + +test_expect_success 'tree:<depth> where we iterate over tree at two levels' ' + git init r5 && + + mkdir -p r5/a/subdir/b && + echo foo > r5/a/subdir/b/foo && + + mkdir -p r5/subdir/b && + echo foo > r5/subdir/b/foo && + + git -C r5 add a subdir && + git -C r5 commit -m "commit msg" && + + git -C r5 rev-list --objects --filter=tree:4 HEAD >actual && + expect_has_with_different_name r5 a/subdir/b/foo +' + +test_expect_success 'tree:<depth> which filters out blob but given as arg' ' + blob_hash=$(git -C r4 rev-parse HEAD:subdir/bar) && + + git -C r4 rev-list --objects --filter=tree:1 HEAD $blob_hash >actual && + grep ^$blob_hash actual ' # Delete some loose objects and use rev-list, but WITHOUT any filtering. @@ -324,4 +616,14 @@ test_expect_success 'rev-list W/ missing=allow-any' ' git -C r1 rev-list --quiet --missing=allow-any --objects HEAD ' +# Test expansion of filter specs. + +test_expect_success 'expand blob limit in protocol' ' + git -C r2 config --local uploadpack.allowfilter 1 && + GIT_TRACE_PACKET="$(pwd)/trace" git -c protocol.version=2 clone \ + --filter=blob:limit=1k "file://$(pwd)/r2" limit && + ! grep "blob:limit=1k" trace && + grep "blob:limit=1024" trace +' + test_done diff --git a/t/t6113-rev-list-bitmap-filters.sh b/t/t6113-rev-list-bitmap-filters.sh new file mode 100755 index 0000000..145603f --- /dev/null +++ b/t/t6113-rev-list-bitmap-filters.sh @@ -0,0 +1,56 @@ +#!/bin/sh + +test_description='rev-list combining bitmaps and filters' +. ./test-lib.sh + +test_expect_success 'set up bitmapped repo' ' + # one commit will have bitmaps, the other will not + test_commit one && + test_commit much-larger-blob-one && + git repack -adb && + test_commit two && + test_commit much-larger-blob-two +' + +test_expect_success 'filters fallback to non-bitmap traversal' ' + # use a path-based filter, since they are inherently incompatible with + # bitmaps (i.e., this test will never get confused by later code to + # combine the features) + filter=$(echo "!one" | git hash-object -w --stdin) && + git rev-list --objects --filter=sparse:oid=$filter HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=sparse:oid=$filter HEAD >actual && + test_cmp expect actual +' + +test_expect_success 'blob:none filter' ' + git rev-list --objects --filter=blob:none HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:none HEAD >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:none filter with specified blob' ' + git rev-list --objects --filter=blob:none HEAD HEAD:two.t >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:none HEAD HEAD:two.t >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:limit filter' ' + git rev-list --objects --filter=blob:limit=5 HEAD >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:limit=5 HEAD >actual && + test_bitmap_traversal expect actual +' + +test_expect_success 'blob:limit filter with specified blob' ' + git rev-list --objects --filter=blob:limit=5 \ + HEAD HEAD:much-larger-blob-two.t >expect && + git rev-list --use-bitmap-index \ + --objects --filter=blob:limit=5 \ + HEAD HEAD:much-larger-blob-two.t >actual && + test_bitmap_traversal expect actual +' + +test_done diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh index d639d94..34502e3 100755 --- a/t/t6120-describe.sh +++ b/t/t6120-describe.sh @@ -1,28 +1,27 @@ #!/bin/sh -test_description='test describe +test_description='test describe' + +# o---o-----o----o----o-------o----x +# \ D,R e / +# \---o-------------o-' +# \ B / +# `-o----o----o-' +# A c +# +# First parent of a merge commit is on the same line, second parent below. - B - .--------------o----o----o----x - / / / - o----o----o----o----o----. / - \ A c / - .------------o---o---o - D,R e -' . ./test-lib.sh check_describe () { expect="$1" shift - R=$(git describe "$@" 2>err.actual) - S=$? - cat err.actual >&3 - test_expect_success "describe $*" ' - test $S = 0 && + describe_opts="$@" + test_expect_success "describe $describe_opts" ' + R=$(git describe $describe_opts 2>err.actual) && case "$R" in $expect) echo happy ;; - *) echo "Oops - $R is not $expect"; + *) echo "Oops - $R is not $expect" && false ;; esac ' @@ -143,16 +142,46 @@ test_expect_success 'rename tag Q back to A' ' test_expect_success 'pack tag refs' 'git pack-refs' check_describe A-* HEAD +test_expect_success 'describe works from outside repo using --git-dir' ' + git clone --bare "$TRASH_DIRECTORY" "$TRASH_DIRECTORY/bare" && + git --git-dir "$TRASH_DIRECTORY/bare" describe >out && + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+$" out +' + check_describe "A-*[0-9a-f]" --dirty +test_expect_success 'describe --dirty with --work-tree' ' + ( + cd "$TEST_DIRECTORY" && + git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty >"$TRASH_DIRECTORY/out" + ) && + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+$" out +' + test_expect_success 'set-up dirty work tree' ' echo >>file ' check_describe "A-*[0-9a-f]-dirty" --dirty +test_expect_success 'describe --dirty with --work-tree (dirty)' ' + ( + cd "$TEST_DIRECTORY" && + git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty >"$TRASH_DIRECTORY/out" + ) && + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+-dirty$" out +' + check_describe "A-*[0-9a-f].mod" --dirty=.mod +test_expect_success 'describe --dirty=.mod with --work-tree (dirty)' ' + ( + cd "$TEST_DIRECTORY" && + git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --dirty=.mod >"$TRASH_DIRECTORY/out" + ) && + grep -E "^A-[1-9][0-9]?-g[0-9a-f]+.mod$" out +' + test_expect_success 'describe --dirty HEAD' ' test_must_fail git describe --dirty HEAD ' @@ -303,8 +332,17 @@ test_expect_success 'describe chokes on severely broken submodules' ' mv .git/modules/sub1/ .git/modules/sub_moved && test_must_fail git describe --dirty ' + test_expect_success 'describe ignoring a broken submodule' ' git describe --broken >out && + grep broken out +' + +test_expect_success 'describe with --work-tree ignoring a broken submodule' ' + ( + cd "$TEST_DIRECTORY" && + git --git-dir "$TRASH_DIRECTORY/.git" --work-tree "$TRASH_DIRECTORY" describe --broken >"$TRASH_DIRECTORY/out" + ) && test_when_finished "mv .git/modules/sub_moved .git/modules/sub1" && grep broken out ' @@ -343,7 +381,7 @@ test_expect_success 'describe tag object' ' test_i18ngrep "fatal: test-blob-1 is neither a commit nor blob" actual ' -test_expect_failure ULIMIT_STACK_SIZE 'name-rev works in a deep repo' ' +test_expect_success ULIMIT_STACK_SIZE 'name-rev works in a deep repo' ' i=1 && while test $i -lt 8000 do @@ -385,4 +423,111 @@ test_expect_success 'describe complains about missing object' ' test_must_fail git describe $ZERO_OID ' +test_expect_success 'name-rev a rev shortly after epoch' ' + test_when_finished "git checkout master" && + + git checkout --orphan no-timestamp-underflow && + # Any date closer to epoch than the CUTOFF_DATE_SLOP constant + # in builtin/name-rev.c. + GIT_COMMITTER_DATE="@1234 +0000" \ + git commit -m "committer date shortly after epoch" && + old_commit_oid=$(git rev-parse HEAD) && + + echo "$old_commit_oid no-timestamp-underflow" >expect && + git name-rev $old_commit_oid >actual && + test_cmp expect actual +' + +# A--------------master +# \ / +# \----------M2 +# \ / +# \---M1-C +# \ / +# B +test_expect_success 'name-rev covers all conditions while looking at parents' ' + git init repo && + ( + cd repo && + + echo A >file && + git add file && + git commit -m A && + A=$(git rev-parse HEAD) && + + git checkout --detach && + echo B >file && + git commit -m B file && + B=$(git rev-parse HEAD) && + + git checkout $A && + git merge --no-ff $B && # M1 + + echo C >file && + git commit -m C file && + + git checkout $A && + git merge --no-ff HEAD@{1} && # M2 + + git checkout master && + git merge --no-ff HEAD@{1} && + + echo "$B master^2^2~1^2" >expect && + git name-rev $B >actual && + + test_cmp expect actual + ) +' + +# B +# o +# \ +# o-----o---o----x +# A +# +test_expect_success 'describe commits with disjoint bases' ' + git init disjoint1 && + ( + cd disjoint1 && + + echo o >> file && git add file && git commit -m o && + echo A >> file && git add file && git commit -m A && + git tag A -a -m A && + echo o >> file && git add file && git commit -m o && + + git checkout --orphan branch && rm file && + echo B > file2 && git add file2 && git commit -m B && + git tag B -a -m B && + git merge --no-ff --allow-unrelated-histories master -m x && + + check_describe "A-3-*" HEAD + ) +' + +# B +# o---o---o------------. +# \ +# o---o---x +# A +# +test_expect_success 'describe commits with disjoint bases 2' ' + git init disjoint2 && + ( + cd disjoint2 && + + echo A >> file && git add file && GIT_COMMITTER_DATE="2020-01-01 18:00" git commit -m A && + git tag A -a -m A && + echo o >> file && git add file && GIT_COMMITTER_DATE="2020-01-01 18:01" git commit -m o && + + git checkout --orphan branch && + echo o >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:00" git commit -m o && + echo o >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:01" git commit -m o && + echo B >> file2 && git add file2 && GIT_COMMITTER_DATE="2020-01-01 15:02" git commit -m B && + git tag B -a -m B && + git merge --no-ff --allow-unrelated-histories master -m x && + + check_describe "B-3-*" HEAD + ) +' + test_done diff --git a/t/t6135-pathspec-with-attrs.sh b/t/t6135-pathspec-with-attrs.sh index e436a73..457cc16 100755 --- a/t/t6135-pathspec-with-attrs.sh +++ b/t/t6135-pathspec-with-attrs.sh @@ -31,7 +31,7 @@ test_expect_success 'setup a tree' ' mkdir sub && while read path do - : >$path && + echo content >$path && git add $path || return 1 done <expect && git commit -m "initial commit" && @@ -48,6 +48,10 @@ test_expect_success 'pathspec with labels and non existent .gitattributes' ' test_must_be_empty actual ' +test_expect_success 'pathspec with labels and non existent .gitattributes (2)' ' + test_must_fail git grep content HEAD -- ":(attr:label)" +' + test_expect_success 'setup .gitattributes' ' cat <<-\EOF >.gitattributes && fileA labelA @@ -74,6 +78,15 @@ test_expect_success 'check specific set attr' ' test_cmp expect actual ' +test_expect_success 'check specific set attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileSetLabel + HEAD:sub/fileSetLabel + EOF + git grep -l content HEAD ":(attr:label)" >actual && + test_cmp expect actual +' + test_expect_success 'check specific unset attr' ' cat <<-\EOF >expect && fileUnsetLabel @@ -83,6 +96,15 @@ test_expect_success 'check specific unset attr' ' test_cmp expect actual ' +test_expect_success 'check specific unset attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileUnsetLabel + HEAD:sub/fileUnsetLabel + EOF + git grep -l content HEAD ":(attr:-label)" >actual && + test_cmp expect actual +' + test_expect_success 'check specific value attr' ' cat <<-\EOF >expect && fileValue @@ -94,6 +116,16 @@ test_expect_success 'check specific value attr' ' test_must_be_empty actual ' +test_expect_success 'check specific value attr (2)' ' + cat <<-\EOF >expect && + HEAD:fileValue + HEAD:sub/fileValue + EOF + git grep -l content HEAD ":(attr:label=foo)" >actual && + test_cmp expect actual && + test_must_fail git grep -l content HEAD ":(attr:label=bar)" +' + test_expect_success 'check unspecified attr' ' cat <<-\EOF >expect && .gitattributes @@ -118,6 +150,30 @@ test_expect_success 'check unspecified attr' ' test_cmp expect actual ' +test_expect_success 'check unspecified attr (2)' ' + cat <<-\EOF >expect && + HEAD:.gitattributes + HEAD:fileA + HEAD:fileAB + HEAD:fileAC + HEAD:fileB + HEAD:fileBC + HEAD:fileC + HEAD:fileNoLabel + HEAD:fileWrongLabel + HEAD:sub/fileA + HEAD:sub/fileAB + HEAD:sub/fileAC + HEAD:sub/fileB + HEAD:sub/fileBC + HEAD:sub/fileC + HEAD:sub/fileNoLabel + HEAD:sub/fileWrongLabel + EOF + git grep -l ^ HEAD ":(attr:!label)" >actual && + test_cmp expect actual +' + test_expect_success 'check multiple unspecified attr' ' cat <<-\EOF >expect && .gitattributes diff --git a/t/t6200-fmt-merge-msg.sh b/t/t6200-fmt-merge-msg.sh index 93f23cf..8a72b4c 100755 --- a/t/t6200-fmt-merge-msg.sh +++ b/t/t6200-fmt-merge-msg.sh @@ -66,12 +66,7 @@ test_expect_success setup ' git commit -a -m "Right #5" && git checkout -b long && - i=0 && - while test $i -lt 30 - do - test_commit $i one && - i=$(($i+1)) - done && + test_commit_bulk --start=0 --message=%s --filename=one 30 && git show-branch && diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index 97bfbee..9c910ce 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -83,6 +83,8 @@ test_atom head push:strip=1 remotes/myfork/master test_atom head push:strip=-1 master test_atom head objecttype commit test_atom head objectsize 171 +test_atom head objectsize:disk 138 +test_atom head deltabase 0000000000000000000000000000000000000000 test_atom head objectname $(git rev-parse refs/heads/master) test_atom head objectname:short $(git rev-parse --short refs/heads/master) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -124,6 +126,10 @@ test_atom tag upstream '' test_atom tag push '' test_atom tag objecttype tag test_atom tag objectsize 154 +test_atom tag objectsize:disk 138 +test_atom tag '*objectsize:disk' 138 +test_atom tag deltabase 0000000000000000000000000000000000000000 +test_atom tag '*deltabase' 0000000000000000000000000000000000000000 test_atom tag objectname $(git rev-parse refs/tags/testtag) test_atom tag objectname:short $(git rev-parse --short refs/tags/testtag) test_atom head objectname:short=1 $(git rev-parse --short=1 refs/heads/master) @@ -340,6 +346,32 @@ test_expect_success 'Verify descending sort' ' ' cat >expected <<\EOF +refs/tags/testtag +refs/tags/testtag-2 +EOF + +test_expect_success 'exercise patterns with prefixes' ' + git tag testtag-2 && + test_when_finished "git tag -d testtag-2" && + git for-each-ref --format="%(refname)" \ + refs/tags/testtag refs/tags/testtag-2 >actual && + test_cmp expected actual +' + +cat >expected <<\EOF +refs/tags/testtag +refs/tags/testtag-2 +EOF + +test_expect_success 'exercise glob patterns with prefixes' ' + git tag testtag-2 && + test_when_finished "git tag -d testtag-2" && + git for-each-ref --format="%(refname)" \ + refs/tags/testtag "refs/tags/testtag-*" >actual && + test_cmp expected actual +' + +cat >expected <<\EOF 'refs/heads/master' 'refs/remotes/origin/master' 'refs/tags/testtag' @@ -386,8 +418,15 @@ test_atom head upstream:track '[ahead 1]' test_atom head upstream:trackshort '>' test_atom head upstream:track,nobracket 'ahead 1' test_atom head upstream:nobracket,track 'ahead 1' -test_atom head push:track '[ahead 1]' -test_atom head push:trackshort '>' + +test_expect_success 'setup for push:track[short]' ' + test_commit third && + git update-ref refs/remotes/myfork/master master && + git reset master~1 +' + +test_atom head push:track '[behind 1]' +test_atom head push:trackshort '<' test_expect_success 'Check that :track[short] cannot be used with other atoms' ' test_must_fail git for-each-ref --format="%(refname:track)" 2>/dev/null && @@ -414,8 +453,10 @@ test_expect_success 'Check for invalid refname format' ' test_expect_success 'set up color tests' ' cat >expected.color <<-EOF && $(git rev-parse --short refs/heads/master) <GREEN>master<RESET> + $(git rev-parse --short refs/remotes/myfork/master) <GREEN>myfork/master<RESET> $(git rev-parse --short refs/remotes/origin/master) <GREEN>origin/master<RESET> $(git rev-parse --short refs/tags/testtag) <GREEN>testtag<RESET> + $(git rev-parse --short refs/tags/third) <GREEN>third<RESET> $(git rev-parse --short refs/tags/two) <GREEN>two<RESET> EOF sed "s/<[^>]*>//g" <expected.color >expected.bare && @@ -485,6 +526,25 @@ test_expect_success 'Check ambiguous head and tag refs II (loose)' ' test_cmp expected actual ' +test_expect_success 'create tag without tagger' ' + git tag -a -m "Broken tag" taggerless && + git tag -f taggerless $(git cat-file tag taggerless | + sed -e "/^tagger /d" | + git hash-object --stdin -w -t tag) +' + +test_atom refs/tags/taggerless type 'commit' +test_atom refs/tags/taggerless tag 'taggerless' +test_atom refs/tags/taggerless tagger '' +test_atom refs/tags/taggerless taggername '' +test_atom refs/tags/taggerless taggeremail '' +test_atom refs/tags/taggerless taggerdate '' +test_atom refs/tags/taggerless committer '' +test_atom refs/tags/taggerless committername '' +test_atom refs/tags/taggerless committeremail '' +test_atom refs/tags/taggerless committerdate '' +test_atom refs/tags/taggerless subject 'Broken tag' + test_expect_success 'an unusual tag with an incomplete line' ' git tag -m "bogo" bogo && diff --git a/t/t6302-for-each-ref-filter.sh b/t/t6302-for-each-ref-filter.sh index fc067ed..35408d5 100755 --- a/t/t6302-for-each-ref-filter.sh +++ b/t/t6302-for-each-ref-filter.sh @@ -441,4 +441,17 @@ test_expect_success '--merged is incompatible with --no-merged' ' test_must_fail git for-each-ref --merged HEAD --no-merged HEAD ' +test_expect_success 'validate worktree atom' ' + cat >expect <<-EOF && + master: $(pwd) + master_worktree: $(pwd)/worktree_dir + side: not checked out + EOF + git worktree add -b master_worktree worktree_dir master && + git for-each-ref --format="%(refname:short): %(if)%(worktreepath)%(then)%(worktreepath)%(else)not checked out%(end)" refs/heads/ >actual && + rm -r worktree_dir && + git worktree prune && + test_cmp expect actual +' + test_done diff --git a/t/t6500-gc.sh b/t/t6500-gc.sh index 4684d06..0a69a67 100755 --- a/t/t6500-gc.sh +++ b/t/t6500-gc.sh @@ -71,6 +71,8 @@ test_expect_success 'gc --keep-largest-pack' ' git gc --keep-largest-pack && ( cd .git/objects/pack && ls *.pack ) >pack-list && test_line_count = 2 pack-list && + awk "/^P /{print \$2}" <.git/objects/info/packs >pack-info && + test_line_count = 2 pack-info && test_path_is_file $BASE_PACK && git fsck ) @@ -101,14 +103,14 @@ test_expect_success 'auto gc with too many loose objects does not attempt to cre ' test_expect_success 'gc --no-quiet' ' - git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + GIT_PROGRESS_DELAY=0 git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && test_must_be_empty stdout && - test_line_count = 1 stderr && test_i18ngrep "Computing commit graph generation numbers" stderr ' test_expect_success TTY 'with TTY: gc --no-quiet' ' - test_terminal git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && + test_terminal env GIT_PROGRESS_DELAY=0 \ + git -c gc.writeCommitGraph=true gc --no-quiet >stdout 2>stderr && test_must_be_empty stdout && test_i18ngrep "Enumerating objects" stderr && test_i18ngrep "Computing commit graph generation numbers" stderr @@ -120,6 +122,25 @@ test_expect_success 'gc --quiet' ' test_must_be_empty stderr ' +test_expect_success 'gc.reflogExpire{Unreachable,}=never skips "expire" via "gc"' ' + test_config gc.reflogExpire never && + test_config gc.reflogExpireUnreachable never && + + GIT_TRACE=$(pwd)/trace.out git gc && + + # Check that git-pack-refs is run as a sanity check (done via + # gc_before_repack()) but that git-expire is not. + grep -E "^trace: (built-in|exec|run_command): git pack-refs --" trace.out && + ! grep -E "^trace: (built-in|exec|run_command): git reflog expire --" trace.out +' + +test_expect_success 'one of gc.reflogExpire{Unreachable,}=never does not skip "expire" via "gc"' ' + >trace.out && + test_config gc.reflogExpire never && + GIT_TRACE=$(pwd)/trace.out git gc && + grep -E "^trace: (built-in|exec|run_command): git reflog expire --" trace.out +' + run_and_wait_for_auto_gc () { # We read stdout from gc for the side effect of waiting until the # background gc process exits, closing its fd 9. Furthermore, the @@ -162,7 +183,15 @@ test_expect_success 'background auto gc respects lock for all operations' ' # now fake a concurrent gc that holds the lock; we can use our # shell pid so that it looks valid. hostname=$(hostname || echo unknown) && - printf "$$ %s" "$hostname" >.git/gc.pid && + shell_pid=$$ && + if test_have_prereq MINGW && test -f /proc/$shell_pid/winpid + then + # In Git for Windows, Bash (actually, the MSYS2 runtime) has a + # different idea of PIDs than git.exe (actually Windows). Use + # the Windows PID in this case. + shell_pid=$(cat /proc/$shell_pid/winpid) + fi && + printf "%d %s" "$shell_pid" "$hostname" >.git/gc.pid && # our gc should exit zero without doing anything run_and_wait_for_auto_gc && diff --git a/t/t6501-freshen-objects.sh b/t/t6501-freshen-objects.sh index 033871e..f30b484 100755 --- a/t/t6501-freshen-objects.sh +++ b/t/t6501-freshen-objects.sh @@ -137,7 +137,7 @@ test_expect_success 'do not complain about existing broken links (commit)' ' some message EOF commit=$(git hash-object -t commit -w broken-commit) && - git gc 2>stderr && + git gc -q 2>stderr && verbose git cat-file -e $commit && test_must_be_empty stderr ' @@ -147,7 +147,7 @@ test_expect_success 'do not complain about existing broken links (tree)' ' 100644 blob 0000000000000000000000000000000000000003 foo EOF tree=$(git mktree --missing <broken-tree) && - git gc 2>stderr && + git gc -q 2>stderr && git cat-file -e $tree && test_must_be_empty stderr ' @@ -162,7 +162,7 @@ test_expect_success 'do not complain about existing broken links (tag)' ' this is a broken tag EOF tag=$(git hash-object -t tag -w broken-tag) && - git gc 2>stderr && + git gc -q 2>stderr && git cat-file -e $tag && test_must_be_empty stderr ' diff --git a/t/t7004-tag.sh b/t/t7004-tag.sh index 0b01862..6db92bd 100755 --- a/t/t7004-tag.sh +++ b/t/t7004-tag.sh @@ -227,10 +227,10 @@ test_expect_success \ test_expect_success \ 'trying to delete two tags, existing and not, should fail in the 2nd' ' tag_exists mytag && - ! tag_exists myhead && - test_must_fail git tag -d mytag anothertag && + ! tag_exists nonexistingtag && + test_must_fail git tag -d mytag nonexistingtag && ! tag_exists mytag && - ! tag_exists myhead + ! tag_exists nonexistingtag ' test_expect_success 'trying to delete an already deleted tag should fail' \ @@ -517,7 +517,6 @@ test_expect_success \ test_expect_success \ 'trying to create tags giving both -m or -F options should fail' ' echo "message file 1" >msgfile1 && - echo "message file 2" >msgfile2 && ! tag_exists msgtag && test_must_fail git tag -m "message 1" -F msgfile1 msgtag && ! tag_exists msgtag && @@ -932,6 +931,27 @@ test_expect_success GPG \ test_cmp expect actual ' +get_tag_header gpgsign-enabled $commit commit $time >expect +echo "A message" >>expect +echo '-----BEGIN PGP SIGNATURE-----' >>expect +test_expect_success GPG \ + 'git tag configured tag.gpgsign enables GPG sign' \ + 'test_config tag.gpgsign true && + git tag -m "A message" gpgsign-enabled && + get_tag_msg gpgsign-enabled>actual && + test_cmp expect actual +' + +get_tag_header no-sign $commit commit $time >expect +echo "A message" >>expect +test_expect_success GPG \ + 'git tag --no-sign configured tag.gpgsign skip GPG sign' \ + 'test_config tag.gpgsign true && + git tag -a --no-sign -m "A message" no-sign && + get_tag_msg no-sign>actual && + test_cmp expect actual +' + test_expect_success GPG \ 'trying to create a signed tag with non-existing -F file should fail' ' ! test -f nonexistingfile && @@ -1399,7 +1419,7 @@ test_expect_success \ get_tag_header reuse $commit commit $time >expect echo "An annotation to be reused" >> expect test_expect_success \ - 'overwriting an annoted tag should use its previous body' ' + 'overwriting an annotated tag should use its previous body' ' git tag -a -m "An annotation to be reused" reuse && GIT_EDITOR=true git tag -f -a reuse && get_tag_msg reuse >actual && @@ -1700,6 +1720,17 @@ test_expect_success '--points-at finds annotated tags of tags' ' test_cmp expect actual ' +test_expect_success 'recursive tagging should give advice' ' + sed -e "s/|$//" <<-EOF >expect && + hint: You have created a nested tag. The object referred to by your new tag is + hint: already a tag. If you meant to tag the object that it points to, use: + hint: | + hint: git tag -f nested annotated-v4.0^{} + EOF + git tag -m nested nested annotated-v4.0 2>actual && + test_i18ncmp expect actual +' + test_expect_success 'multiple --points-at are OR-ed together' ' cat >expect <<-\EOF && v2.0 diff --git a/t/t7009-filter-branch-null-sha1.sh b/t/t7008-filter-branch-null-sha1.sh index 9ba9f24..9ba9f24 100755 --- a/t/t7009-filter-branch-null-sha1.sh +++ b/t/t7008-filter-branch-null-sha1.sh diff --git a/t/t7012-skip-worktree-writing.sh b/t/t7012-skip-worktree-writing.sh index 9d1abe5..7476781 100755 --- a/t/t7012-skip-worktree-writing.sh +++ b/t/t7012-skip-worktree-writing.sh @@ -134,6 +134,21 @@ test_expect_success 'git-clean, dirty case' ' test_i18ncmp expected result ' +test_expect_success '--ignore-skip-worktree-entries leaves worktree alone' ' + test_commit keep-me && + git update-index --skip-worktree keep-me.t && + rm keep-me.t && + + : ignoring the worktree && + git update-index --remove --ignore-skip-worktree-entries keep-me.t && + git diff-index --cached --exit-code HEAD && + + : not ignoring the worktree, a deletion is staged && + git update-index --remove keep-me.t && + test_must_fail git diff-index --cached --exit-code HEAD \ + --diff-filter=D -- keep-me.t +' + #TODO test_expect_failure 'git-apply adds file' false #TODO test_expect_failure 'git-apply updates file' false #TODO test_expect_failure 'git-apply removes file' false diff --git a/t/t7030-verify-tag.sh b/t/t7030-verify-tag.sh index 041e319..5c5bc32 100755 --- a/t/t7030-verify-tag.sh +++ b/t/t7030-verify-tag.sh @@ -44,8 +44,8 @@ test_expect_success GPG 'create signed tags' ' test_expect_success GPGSM 'create signed tags x509 ' ' test_config gpg.format x509 && test_config user.signingkey $GIT_COMMITTER_EMAIL && - echo 9 >file && test_tick && git commit -a -m "nineth gpgsm-signed" && - git tag -s -m nineth nineth-signed-x509 + echo 9 >file && test_tick && git commit -a -m "ninth gpgsm-signed" && + git tag -s -m ninth ninth-signed-x509 ' test_expect_success GPG 'verify and show signatures' ' @@ -80,10 +80,34 @@ test_expect_success GPG 'verify and show signatures' ' ' test_expect_success GPGSM 'verify and show signatures x509' ' - git verify-tag nineth-signed-x509 2>actual && + git verify-tag ninth-signed-x509 2>actual && grep "Good signature from" actual && ! grep "BAD signature from" actual && - echo nineth-signed-x509 OK + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with low minTrustLevel' ' + test_config gpg.minTrustLevel undefined && + git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with matching minTrustLevel' ' + test_config gpg.minTrustLevel fully && + git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK +' + +test_expect_success GPGSM 'verify and show signatures x509 with high minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + test_must_fail git verify-tag ninth-signed-x509 2>actual && + grep "Good signature from" actual && + ! grep "BAD signature from" actual && + echo ninth-signed-x509 OK ' test_expect_success GPG 'detect fudged signature' ' @@ -127,10 +151,10 @@ test_expect_success GPG 'verify signatures with --raw' ' ' test_expect_success GPGSM 'verify signatures with --raw x509' ' - git verify-tag --raw nineth-signed-x509 2>actual && + git verify-tag --raw ninth-signed-x509 2>actual && grep "GOODSIG" actual && ! grep "BADSIG" actual && - echo nineth-signed-x509 OK + echo ninth-signed-x509 OK ' test_expect_success GPG 'verify multiple tags' ' @@ -147,7 +171,7 @@ test_expect_success GPG 'verify multiple tags' ' ' test_expect_success GPGSM 'verify multiple tags x509' ' - tags="seventh-signed nineth-signed-x509" && + tags="seventh-signed ninth-signed-x509" && for i in $tags do git verify-tag -v --raw $i || return 1 diff --git a/t/t7060-wtstatus.sh b/t/t7060-wtstatus.sh index 53cf42f..d521874 100755 --- a/t/t7060-wtstatus.sh +++ b/t/t7060-wtstatus.sh @@ -38,7 +38,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - deleted by us: foo no changes added to commit (use "git add" and/or "git commit -a") @@ -143,7 +142,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - both added: conflict.txt deleted by them: main.txt @@ -177,7 +175,6 @@ You have unmerged paths. Unmerged paths: (use "git add/rm <file>..." as appropriate to mark resolution) - both deleted: main.txt added by them: sub_master.txt added by us: sub_second.txt @@ -201,12 +198,10 @@ You have unmerged paths. (use "git merge --abort" to abort the merge) Changes to be committed: - new file: sub_master.txt Unmerged paths: (use "git rm <file>..." to mark resolution) - both deleted: main.txt Untracked files not listed (use -u option to show untracked files) diff --git a/t/t7061-wtstatus-ignore.sh b/t/t7061-wtstatus-ignore.sh index 0c394cf..e4cf548 100755 --- a/t/t7061-wtstatus-ignore.sh +++ b/t/t7061-wtstatus-ignore.sh @@ -43,11 +43,16 @@ test_expect_success 'status untracked directory with --ignored -u' ' test_cmp expected actual ' cat >expected <<\EOF -?? untracked/uncommitted +?? untracked/ !! untracked/ignored EOF -test_expect_success 'status prefixed untracked directory with --ignored' ' +test_expect_success 'status of untracked directory with --ignored works with or without prefix' ' + git status --porcelain --ignored >tmp && + grep untracked/ tmp >actual && + rm tmp && + test_cmp expected actual && + git status --porcelain --ignored untracked/ >actual && test_cmp expected actual ' diff --git a/t/t7064-wtstatus-pv2.sh b/t/t7064-wtstatus-pv2.sh index 11eccc2..537787e 100755 --- a/t/t7064-wtstatus-pv2.sh +++ b/t/t7064-wtstatus-pv2.sh @@ -445,6 +445,14 @@ test_expect_success 'verify --[no-]ahead-behind with V2 format' ' EOF git status --ahead-behind --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm that "status.aheadbehind" DOES NOT work on V2 format. + git -c status.aheadbehind=false status --porcelain=v2 --branch --untracked-files=all >actual && + test_cmp expect actual && + + # Confirm that "status.aheadbehind" DOES NOT work on V2 format. + git -c status.aheadbehind=true status --porcelain=v2 --branch --untracked-files=all >actual && test_cmp expect actual ) ' diff --git a/t/t7105-reset-patch.sh b/t/t7105-reset-patch.sh index bd10a96..fc2a6cf 100755 --- a/t/t7105-reset-patch.sh +++ b/t/t7105-reset-patch.sh @@ -38,6 +38,27 @@ test_expect_success PERL 'git reset -p HEAD^' ' test_i18ngrep "Apply" output ' +test_expect_success PERL 'git reset -p HEAD^^{tree}' ' + test_write_lines n y | git reset -p HEAD^^{tree} >output && + verify_state dir/foo work parent && + verify_saved_state bar && + test_i18ngrep "Apply" output +' + +test_expect_success PERL 'git reset -p HEAD^:dir/foo (blob fails)' ' + set_and_save_state dir/foo work work && + test_must_fail git reset -p HEAD^:dir/foo && + verify_saved_state dir/foo && + verify_saved_state bar +' + +test_expect_success PERL 'git reset -p aaaaaaaa (unknown fails)' ' + set_and_save_state dir/foo work work && + test_must_fail git reset -p aaaaaaaa && + verify_saved_state dir/foo && + verify_saved_state bar +' + # The idea in the rest is that bar sorts first, so we always say 'y' # first and if the path limiter fails it'll apply to bar instead of # dir/foo. There's always an extra 'n' to reject edits to dir/foo in diff --git a/t/t7107-reset-pathspec-file.sh b/t/t7107-reset-pathspec-file.sh new file mode 100755 index 0000000..cad3a9d --- /dev/null +++ b/t/t7107-reset-pathspec-file.sh @@ -0,0 +1,173 @@ +#!/bin/sh + +test_description='reset --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add . && + git commit --include . -m "Commit" && + git tag checkpoint +' + +restore_checkpoint () { + git reset --hard checkpoint +} + +verify_expect () { + git status --porcelain -- fileA.t fileB.t fileC.t fileD.t >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + git rm fileA.t && + echo fileA.t | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + git rm fileA.t && + echo fileA.t >list && + git reset --pathspec-from-file=list && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\0fileB.t\0" | git reset --pathspec-from-file=- --pathspec-file-nul && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\nfileB.t\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\nfileB.t" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + git rm fileA.t fileB.t && + printf "fileA.t\r\nfileB.t\r\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git rm fileA.t && + git reset --pathspec-from-file=list && + + cat >expect <<-\EOF && + D fileA.t + EOF + verify_expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + # Note: "git reset" has not yet learned to fail on wrong pathspecs + git reset --pathspec-from-file=list --pathspec-file-nul && + + cat >expect <<-\EOF && + D fileA.t + EOF + test_must_fail verify_expect +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + git rm fileA.t fileB.t fileC.t fileD.t && + printf "fileB.t\nfileC.t\n" | git reset --pathspec-from-file=- && + + cat >expect <<-\EOF && + D fileA.t + D fileB.t + D fileC.t + D fileD.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + git rm fileA.t && + + test_must_fail git reset --pathspec-from-file=list --patch 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --patch" err && + + test_must_fail git reset --pathspec-from-file=list -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git reset --pathspec-file-nul 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git reset --soft --pathspec-from-file=list 2>err && + test_i18ngrep -e "fatal: Cannot do soft reset with paths" err && + + test_must_fail git reset --hard --pathspec-from-file=list 2>err && + test_i18ngrep -e "fatal: Cannot do hard reset with paths" err +' + +test_done diff --git a/t/t7113-post-index-change-hook.sh b/t/t7113-post-index-change-hook.sh new file mode 100755 index 0000000..f011ad7 --- /dev/null +++ b/t/t7113-post-index-change-hook.sh @@ -0,0 +1,144 @@ +#!/bin/sh + +test_description='post index change hook' + +. ./test-lib.sh + +test_expect_success 'setup' ' + mkdir -p dir1 && + touch dir1/file1.txt && + echo testing >dir1/file2.txt && + git add . && + git commit -m "initial" +' + +test_expect_success 'test status, add, commit, others trigger hook without flags set' ' + mkdir -p .git/hooks && + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir is set." >testfailure + exit 1 + fi + if test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_skipworktree is set." >testfailure + exit 1 + fi + if test -f ".git/index.lock"; then + echo ".git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo ".git/index does not exist" >testfailure + exit 3 + fi + echo "success" >testsuccess + EOF + mkdir -p dir2 && + touch dir2/file1.txt && + touch dir2/file2.txt && + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git status && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git add . && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git commit -m "second" && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git checkout -- dir1/file1.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git update-index && + test_path_is_missing testsuccess && + test_path_is_missing testfailure && + git reset --soft && + test_path_is_missing testsuccess && + test_path_is_missing testfailure +' + +test_expect_success 'test checkout and reset trigger the hook' ' + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1 && test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir and updated_skipworktree are both set." >testfailure + exit 1 + fi + if test "$1" -eq 0 && test "$2" -eq 0; then + echo "Invalid combination of flags passed to hook; neither updated_workdir or updated_skipworktree are set." >testfailure + exit 2 + fi + if test "$1" -eq 1; then + if test -f ".git/index.lock"; then + echo "updated_workdir set but .git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo "updated_workdir set but .git/index does not exist" >testfailure + exit 3 + fi + else + echo "update_workdir should be set for checkout" >testfailure + exit 4 + fi + echo "success" >testsuccess + EOF + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git checkout master && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + test-tool chmtime +60 dir1/file1.txt && + git checkout HEAD && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + test-tool chmtime +60 dir1/file1.txt && + git reset --hard && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git checkout -B test && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure +' + +test_expect_success 'test reset --mixed and update-index triggers the hook' ' + write_script .git/hooks/post-index-change <<-\EOF && + if test "$1" -eq 1 && test "$2" -eq 1; then + echo "Invalid combination of flags passed to hook; updated_workdir and updated_skipworktree are both set." >testfailure + exit 1 + fi + if test "$1" -eq 0 && test "$2" -eq 0; then + echo "Invalid combination of flags passed to hook; neither updated_workdir or updated_skipworktree are set." >testfailure + exit 2 + fi + if test "$2" -eq 1; then + if test -f ".git/index.lock"; then + echo "updated_skipworktree set but .git/index.lock exists" >testfailure + exit 3 + fi + if ! test -f ".git/index"; then + echo "updated_skipworktree set but .git/index does not exist" >testfailure + exit 3 + fi + else + echo "updated_skipworktree should be set for reset --mixed and update-index" >testfailure + exit 4 + fi + echo "success" >testsuccess + EOF + : force index to be dirty && + test-tool chmtime +60 dir1/file1.txt && + git reset --mixed --quiet HEAD~1 && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git hash-object -w --stdin <dir1/file2.txt >expect && + git update-index --cacheinfo 100644 "$(cat expect)" dir1/file1.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure && + git update-index --skip-worktree dir1/file2.txt && + git update-index --remove dir1/file2.txt && + test_path_is_file testsuccess && rm -f testsuccess && + test_path_is_missing testfailure +' + +test_done diff --git a/t/t7201-co.sh b/t/t7201-co.sh index 72b9b37..b696bae 100755 --- a/t/t7201-co.sh +++ b/t/t7201-co.sh @@ -223,13 +223,8 @@ test_expect_success 'switch to another branch while carrying a deletion' ' test_must_fail git checkout simple 2>errs && test_i18ngrep overwritten errs && - git checkout --merge simple 2>errs && - test_i18ngrep ! overwritten errs && - git ls-files -u && - test_must_fail git cat-file -t :0:two && - test "$(git cat-file -t :1:two)" = blob && - test "$(git cat-file -t :2:two)" = blob && - test_must_fail git cat-file -t :3:two + test_must_fail git read-tree --quiet -m -u HEAD simple 2>errs && + test_must_be_empty errs ' test_expect_success 'checkout to detach HEAD (with advice declined)' ' @@ -254,7 +249,7 @@ test_expect_success 'checkout to detach HEAD (with advice declined)' ' test_expect_success 'checkout to detach HEAD' ' git config advice.detachedHead true && git checkout -f renamer && git clean -f && - GIT_TEST_GETTEXT_POISON= git checkout renamer^ 2>messages && + GIT_TEST_GETTEXT_POISON=false git checkout renamer^ 2>messages && grep "HEAD is now at 7329388" messages && test_line_count -gt 1 messages && H=$(git rev-parse --verify HEAD) && diff --git a/t/t7300-clean.sh b/t/t7300-clean.sh index 7b36954..cb5e34d 100755 --- a/t/t7300-clean.sh +++ b/t/t7300-clean.sh @@ -117,6 +117,7 @@ test_expect_success C_LOCALE_OUTPUT 'git clean with relative prefix' ' would_clean=$( cd docs && git clean -n ../src | + grep part3 | sed -n -e "s|^Would remove ||p" ) && verbose test "$would_clean" = ../src/part3.c @@ -129,6 +130,7 @@ test_expect_success C_LOCALE_OUTPUT 'git clean with absolute path' ' would_clean=$( cd docs && git clean -n "$(pwd)/../src" | + grep part3 | sed -n -e "s|^Would remove ||p" ) && verbose test "$would_clean" = ../src/part3.c @@ -547,7 +549,7 @@ test_expect_failure 'nested (non-empty) bare repositories should be cleaned even test_path_is_missing strange_bare ' -test_expect_success 'giving path in nested git work tree will remove it' ' +test_expect_success 'giving path in nested git work tree will NOT remove it' ' rm -fr repo && mkdir repo && ( @@ -559,7 +561,7 @@ test_expect_success 'giving path in nested git work tree will remove it' ' git clean -f -d repo/bar/baz && test_path_is_file repo/.git/HEAD && test_path_is_dir repo/bar/ && - test_path_is_missing repo/bar/baz + test_path_is_file repo/bar/baz/hello.world ' test_expect_success 'giving path to nested .git will not remove it' ' @@ -577,7 +579,7 @@ test_expect_success 'giving path to nested .git will not remove it' ' test_path_is_dir untracked/ ' -test_expect_success 'giving path to nested .git/ will remove contents' ' +test_expect_success 'giving path to nested .git/ will NOT remove contents' ' rm -fr repo untracked && mkdir repo untracked && ( @@ -587,7 +589,7 @@ test_expect_success 'giving path to nested .git/ will remove contents' ' ) && git clean -f -d repo/.git/ && test_path_is_dir repo/.git && - test_dir_is_empty repo/.git && + test_path_is_file repo/.git/HEAD && test_path_is_dir untracked/ ' @@ -669,4 +671,79 @@ test_expect_success 'git clean -d skips untracked dirs containing ignored files' test_path_is_missing foo/b/bb ' +test_expect_success 'git clean -d skips nested repo containing ignored files' ' + test_when_finished "rm -rf nested-repo-with-ignored-file" && + + git init nested-repo-with-ignored-file && + ( + cd nested-repo-with-ignored-file && + >file && + git add file && + git commit -m Initial && + + # This file is ignored by a .gitignore rule in the outer repo + # added in the previous test. + >ignoreme + ) && + + git clean -fd && + + test_path_is_file nested-repo-with-ignored-file/.git/index && + test_path_is_file nested-repo-with-ignored-file/ignoreme && + test_path_is_file nested-repo-with-ignored-file/file +' + +test_expect_success 'git clean handles being told what to clean' ' + mkdir -p d1 d2 && + touch d1/ut d2/ut && + git clean -f */ut && + test_path_is_missing d1/ut && + test_path_is_missing d2/ut +' + +test_expect_success 'git clean handles being told what to clean, with -d' ' + mkdir -p d1 d2 && + touch d1/ut d2/ut && + git clean -ffd */ut && + test_path_is_missing d1/ut && + test_path_is_missing d2/ut +' + +test_expect_success 'git clean works if a glob is passed without -d' ' + mkdir -p d1 d2 && + touch d1/ut d2/ut && + git clean -f "*ut" && + test_path_is_missing d1/ut && + test_path_is_missing d2/ut +' + +test_expect_success 'git clean works if a glob is passed with -d' ' + mkdir -p d1 d2 && + touch d1/ut d2/ut && + git clean -ffd "*ut" && + test_path_is_missing d1/ut && + test_path_is_missing d2/ut +' + +test_expect_success MINGW 'handle clean & core.longpaths = false nicely' ' + test_config core.longpaths false && + a50=aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa && + mkdir -p $a50$a50/$a50$a50/$a50$a50 && + : >"$a50$a50/test.txt" 2>"$a50$a50/$a50$a50/$a50$a50/test.txt" && + # create a temporary outside the working tree to hide from "git clean" + test_must_fail git clean -xdf 2>.git/err && + # grepping for a strerror string is unportable but it is OK here with + # MINGW prereq + test_i18ngrep "too long" .git/err +' + +test_expect_success 'clean untracked paths by pathspec' ' + git init untracked && + mkdir untracked/dir && + echo >untracked/dir/file.txt && + git -C untracked clean -f dir/file.txt && + ls untracked/dir >actual && + test_must_be_empty actual +' + test_done diff --git a/t/t7400-submodule-basic.sh b/t/t7400-submodule-basic.sh index 76a7cb0..e3e2aab 100755 --- a/t/t7400-submodule-basic.sh +++ b/t/t7400-submodule-basic.sh @@ -46,6 +46,30 @@ test_expect_success 'submodule update aborts on missing gitmodules url' ' test_must_fail git submodule init ' +test_expect_success 'add aborts on repository with no commits' ' + cat >expect <<-\EOF && + '"'repo-no-commits'"' does not have a commit checked out + EOF + git init repo-no-commits && + test_must_fail git submodule add ../a ./repo-no-commits 2>actual && + test_i18ncmp expect actual +' + +test_expect_success 'status should ignore inner git repo when not added' ' + rm -fr inner && + mkdir inner && + ( + cd inner && + git init && + >t && + git add t && + git commit -m "initial" + ) && + test_must_fail git submodule status inner 2>output.err && + rm -fr inner && + test_i18ngrep "^error: .*did not match any file(s) known to git" output.err +' + test_expect_success 'setup - repository in init subdirectory' ' mkdir init && ( @@ -147,9 +171,11 @@ test_expect_success 'submodule add to .gitignored path fails' ' ( cd addtest-ignore && cat <<-\EOF >expect && - The following path is ignored by one of your .gitignore files: + The following paths are ignored by one of your .gitignore files: submod - Use -f if you really want to add it. + hint: Use -f if you really want to add them. + hint: Turn this message off by running + hint: "git config advice.addIgnoredFile false" EOF # Does not use test_commit due to the ignore echo "*" > .gitignore && @@ -182,6 +208,17 @@ test_expect_success 'submodule add to reconfigure existing submodule with --forc ) ' +test_expect_success 'submodule add relays add --dry-run stderr' ' + test_when_finished "rm -rf addtest/.git/index.lock" && + ( + cd addtest && + : >.git/index.lock && + ! git submodule add "$submodurl" sub-while-locked 2>output.err && + test_i18ngrep "^fatal: .*index\.lock" output.err && + test_path_is_missing sub-while-locked + ) +' + test_expect_success 'submodule add --branch' ' echo "refs/heads/initial" >expect-head && cat <<-\EOF >expect-heads && @@ -347,6 +384,28 @@ test_expect_success 'status should only print one line' ' test_line_count = 1 lines ' +test_expect_success 'status from subdirectory should have the same SHA1' ' + test_when_finished "rmdir addtest/subdir" && + ( + cd addtest && + mkdir subdir && + git submodule status >output && + awk "{print \$1}" <output >expect && + cd subdir && + git submodule status >../output && + awk "{print \$1}" <../output >../actual && + test_cmp ../expect ../actual && + git -C ../submod checkout HEAD^ && + git submodule status >../output && + awk "{print \$1}" <../output >../actual2 && + cd .. && + git submodule status >output && + awk "{print \$1}" <output >expect2 && + test_cmp expect2 actual2 && + ! test_cmp actual actual2 + ) +' + test_expect_success 'setup - fetch commit name from submodule' ' rev1=$(cd .subrepo && git rev-parse HEAD) && printf "rev1: %s\n" "$rev1" && @@ -368,6 +427,14 @@ test_expect_success 'init should register submodule url in .git/config' ' test_cmp expect url ' +test_expect_success 'status should still be "missing" after initializing' ' + rm -fr init && + mkdir init && + git submodule status >lines && + rm -fr init && + grep "^-$rev1" lines +' + test_failure_with_unknown_submodule () { test_must_fail git submodule $1 no-such-submodule 2>output.err && test_i18ngrep "^error: .*no-such-submodule" output.err @@ -518,7 +585,6 @@ test_expect_success 'update --init' ' test_must_fail git config submodule.example.url && git submodule update init 2> update.out && - cat update.out && test_i18ngrep "not initialized" update.out && test_must_fail git rev-parse --resolve-git-dir init/.git && @@ -536,7 +602,6 @@ test_expect_success 'update --init from subdirectory' ' ( cd sub && git submodule update ../init 2>update.out && - cat update.out && test_i18ngrep "not initialized" update.out && test_must_fail git rev-parse --resolve-git-dir ../init/.git && @@ -809,7 +874,7 @@ test_expect_success '../bar/a/b/c works with relative local path - ../foo/bar.gi cp pristine-.git-config .git/config && cp pristine-.gitmodules .gitmodules && mkdir -p a/b/c && - (cd a/b/c && git init) && + (cd a/b/c && git init && test_commit msg) && git config remote.origin.url ../foo/bar.git && git submodule add ../bar/a/b/c ./a/b/c && git submodule init && @@ -984,6 +1049,11 @@ test_expect_success 'submodule deinit should remove the whole submodule section rmdir init ' +test_expect_success 'submodule deinit should unset core.worktree' ' + test_path_is_file .git/modules/example/config && + test_must_fail git config -f .git/modules/example/config core.worktree +' + test_expect_success 'submodule deinit from subdirectory' ' git submodule update --init && git config submodule.example.foo bar && diff --git a/t/t7405-submodule-merge.sh b/t/t7405-submodule-merge.sh index 7855bd8..aa33978 100755 --- a/t/t7405-submodule-merge.sh +++ b/t/t7405-submodule-merge.sh @@ -417,7 +417,7 @@ test_expect_failure 'directory/submodule conflict; keep submodule clean' ' ) ' -test_expect_failure 'directory/submodule conflict; should not treat submodule files as untracked or in the way' ' +test_expect_failure !FAIL_PREREQS 'directory/submodule conflict; should not treat submodule files as untracked or in the way' ' test_when_finished "git -C directory-submodule/path reset --hard" && test_when_finished "git -C directory-submodule reset --hard" && ( diff --git a/t/t7406-submodule-update.sh b/t/t7406-submodule-update.sh index ad7d8fa..4fb447a 100755 --- a/t/t7406-submodule-update.sh +++ b/t/t7406-submodule-update.sh @@ -158,7 +158,6 @@ test_expect_success 'submodule update --init from and of subdirectory' ' test_i18ncmp expect2 actual2 ' -apos="'"; test_expect_success 'submodule update does not fetch already present commits' ' (cd submodule && echo line3 >> file && @@ -168,7 +167,7 @@ test_expect_success 'submodule update does not fetch already present commits' ' ) && (cd super/submodule && head=$(git rev-parse --verify HEAD) && - echo "Submodule path ${apos}submodule$apos: checked out $apos$head$apos" > ../../expected && + echo "Submodule path ${SQ}submodule$SQ: checked out $SQ$head$SQ" > ../../expected && git reset --hard HEAD~1 ) && (cd super && @@ -959,7 +958,10 @@ test_expect_success 'submodule update clone shallow submodule outside of depth' cd super3 && sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp && mv -f .gitmodules.tmp .gitmodules && - test_must_fail git submodule update --init --depth=1 2>actual && + # Some protocol versions (e.g. 2) support fetching + # unadvertised objects, so restrict this test to v0. + test_must_fail env GIT_TEST_PROTOCOL_VERSION=0 \ + git submodule update --init --depth=1 2>actual && test_i18ngrep "Direct fetching of that commit failed." actual && git -C ../submodule config uploadpack.allowReachableSHA1InWant true && git submodule update --init --depth=1 >actual && diff --git a/t/t7407-submodule-foreach.sh b/t/t7407-submodule-foreach.sh index 77729ac..6b2aa91 100755 --- a/t/t7407-submodule-foreach.sh +++ b/t/t7407-submodule-foreach.sh @@ -411,4 +411,21 @@ test_expect_success 'multi-argument command passed to foreach is not shell-evalu test_cmp expected actual ' +test_expect_success 'option-like arguments passed to foreach commands are not lost' ' + ( + cd super && + git submodule foreach "echo be --quiet" > ../expected && + git submodule foreach echo be --quiet > ../actual + ) && + grep -sq -e "--quiet" expected && + test_cmp expected actual +' + +test_expect_success 'option-like arguments passed to foreach recurse correctly' ' + git -C clone2 submodule foreach --recursive "echo be --an-option" >expect && + git -C clone2 submodule foreach --recursive echo be --an-option >actual && + grep -e "--an-option" expect && + test_cmp expect actual +' + test_done diff --git a/t/t7410-submodule-checkout-to.sh b/t/t7410-submodule-checkout-to.sh deleted file mode 100755 index f1b492e..0000000 --- a/t/t7410-submodule-checkout-to.sh +++ /dev/null @@ -1,77 +0,0 @@ -#!/bin/sh - -test_description='Combination of submodules and multiple workdirs' - -. ./test-lib.sh - -base_path=$(pwd -P) - -test_expect_success 'setup: make origin' ' - mkdir -p origin/sub && - ( - cd origin/sub && git init && - echo file1 >file1 && - git add file1 && - git commit -m file1 - ) && - mkdir -p origin/main && - ( - cd origin/main && git init && - git submodule add ../sub && - git commit -m "add sub" - ) && - ( - cd origin/sub && - echo file1updated >file1 && - git add file1 && - git commit -m "file1 updated" - ) && - git -C origin/main/sub pull && - ( - cd origin/main && - git add sub && - git commit -m "sub updated" - ) -' - -test_expect_success 'setup: clone' ' - mkdir clone && - git -C clone clone --recursive "$base_path/origin/main" -' - -rev1_hash_main=$(git --git-dir=origin/main/.git show --pretty=format:%h -q "HEAD~1") -rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1") - -test_expect_success 'checkout main' ' - mkdir default_checkout && - git -C clone/main worktree add "$base_path/default_checkout/main" "$rev1_hash_main" -' - -test_expect_failure 'can see submodule diffs just after checkout' ' - git -C default_checkout/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_expect_success 'checkout main and initialize independent clones' ' - mkdir fully_cloned_submodule && - git -C clone/main worktree add "$base_path/fully_cloned_submodule/main" "$rev1_hash_main" && - git -C fully_cloned_submodule/main submodule update -' - -test_expect_success 'can see submodule diffs after independent cloning' ' - git -C fully_cloned_submodule/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_expect_success 'checkout sub manually' ' - mkdir linked_submodule && - git -C clone/main worktree add "$base_path/linked_submodule/main" "$rev1_hash_main" && - git -C clone/main/sub worktree add "$base_path/linked_submodule/main/sub" "$rev1_hash_sub" -' - -test_expect_success 'can see submodule diffs after manual checkout of linked submodule' ' - git -C linked_submodule/main diff --submodule master"^!" >out && - grep "file1 updated" out -' - -test_done diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh index 89690b7..ad28e93 100755 --- a/t/t7411-submodule-config.sh +++ b/t/t7411-submodule-config.sh @@ -142,6 +142,15 @@ test_expect_success 'reading submodules config from the working tree with "submo ) ' +test_expect_success 'unsetting submodules config from the working tree with "submodule--helper config --unset"' ' + (cd super && + git submodule--helper config --unset submodule.submodule.url && + git submodule--helper config submodule.submodule.url >actual && + test_must_be_empty actual + ) +' + + test_expect_success 'writing submodules config with "submodule--helper config"' ' (cd super && echo "new_url" >expect && @@ -234,18 +243,14 @@ test_expect_success 'reading nested submodules config' ' ) ' -# When this test eventually passes, before turning it into -# test_expect_success, remember to replace the test_i18ngrep below with -# a "test_must_be_empty warning" to be sure that the warning is actually -# removed from the code. -test_expect_failure 'reading nested submodules config when .gitmodules is not in the working tree' ' +test_expect_success 'reading nested submodules config when .gitmodules is not in the working tree' ' test_when_finished "git -C super/submodule checkout .gitmodules" && (cd super && echo "./nested_submodule" >expect && rm submodule/.gitmodules && test-tool submodule-nested-repo-config \ submodule submodule.nested_submodule.url >actual 2>warning && - test_i18ngrep "nested submodules without %s in the working tree are not supported yet" warning && + test_must_be_empty warning && test_cmp expect actual ) ' diff --git a/t/t7412-submodule-absorbgitdirs.sh b/t/t7412-submodule-absorbgitdirs.sh index ce74c12..1cfa150 100755 --- a/t/t7412-submodule-absorbgitdirs.sh +++ b/t/t7412-submodule-absorbgitdirs.sh @@ -75,7 +75,12 @@ test_expect_success 're-setup nested submodule' ' GIT_WORK_TREE=../../../nested git -C sub1/.git/modules/nested config \ core.worktree "../../../nested" && # make sure this re-setup is correct - git status --ignore-submodules=none + git status --ignore-submodules=none && + + # also make sure this old setup does not regress + git submodule update --init --recursive >out 2>err && + test_must_be_empty out && + test_must_be_empty err ' test_expect_success 'absorb the git dir in a nested submodule' ' diff --git a/t/t7415-submodule-names.sh b/t/t7415-submodule-names.sh index 140ea8c..f70368b 100755 --- a/t/t7415-submodule-names.sh +++ b/t/t7415-submodule-names.sh @@ -154,7 +154,7 @@ test_expect_success 'fsck detects symlinked .gitmodules file' ' # symlink detector; this grep string comes from the config # variable name and will not be translated. test_must_fail git fsck 2>output && - grep gitmodulesSymlink output + test_i18ngrep gitmodulesSymlink output ) ' @@ -172,7 +172,7 @@ test_expect_success 'fsck detects non-blob .gitmodules' ' git ls-tree HEAD | sed s/subdir/.gitmodules/ | git mktree && test_must_fail git fsck 2>output && - grep gitmodulesBlob output + test_i18ngrep gitmodulesBlob output ) ' @@ -186,7 +186,7 @@ test_expect_success 'fsck detects corrupt .gitmodules' ' git commit -m "broken gitmodules" && git fsck 2>output && - grep gitmodulesParse output && + test_i18ngrep gitmodulesParse output && test_i18ngrep ! "bad config" output ) ' @@ -207,6 +207,9 @@ test_expect_success MINGW 'prevent git~1 squatting on Windows' ' git hash-object -w --stdin)" && rev="$(git rev-parse --verify HEAD)" && hash="$(echo x | git hash-object -w --stdin)" && + test_must_fail git update-index --add \ + --cacheinfo 160000,$rev,d\\a 2>err && + test_i18ngrep "Invalid path" err && git -c core.protectNTFS=false update-index --add \ --cacheinfo 100644,$modules,.gitmodules \ --cacheinfo 160000,$rev,c \ @@ -214,9 +217,7 @@ test_expect_success MINGW 'prevent git~1 squatting on Windows' ' --cacheinfo 100644,$hash,d./a/x \ --cacheinfo 100644,$hash,d./a/..git && test_tick && - git -c core.protectNTFS=false commit -m "module" && - test_must_fail git show HEAD: 2>err && - test_i18ngrep backslash err + git -c core.protectNTFS=false commit -m "module" ) && test_must_fail git -c core.protectNTFS=false \ clone --recurse-submodules squatting squatting-clone 2>err && @@ -244,7 +245,7 @@ test_expect_success 'git dirs of sibling submodules must not be nested' ' git commit -m nested ) && test_must_fail git clone --recurse-submodules nested clone 2>err && - test_i18ngrep -E "(is inside git dir|hippo already exists|not a git repository: .*/hippo)" err + test_i18ngrep "is inside git dir" err ' test_done diff --git a/t/t7419-submodule-set-branch.sh b/t/t7419-submodule-set-branch.sh new file mode 100755 index 0000000..fd25f78 --- /dev/null +++ b/t/t7419-submodule-set-branch.sh @@ -0,0 +1,93 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='Test submodules set-branch subcommand + +This test verifies that the set-branch subcommand of git-submodule is working +as expected. +' + +TEST_NO_CREATE_REPO=1 +. ./test-lib.sh + +test_expect_success 'submodule config cache setup' ' + mkdir submodule && + (cd submodule && + git init && + echo a >a && + git add . && + git commit -ma && + git checkout -b topic && + echo b >a && + git add . && + git commit -mb + ) && + mkdir super && + (cd super && + git init && + git submodule add ../submodule && + git commit -m "add submodule" + ) +' + +test_expect_success 'ensure submodule branch is unset' ' + (cd super && + ! grep branch .gitmodules + ) +' + +test_expect_success 'test submodule set-branch --branch' ' + (cd super && + git submodule set-branch --branch topic submodule && + grep "branch = topic" .gitmodules && + git submodule update --remote && + cat <<-\EOF >expect && + b + EOF + git -C submodule show -s --pretty=%s >actual && + test_cmp expect actual + ) +' + +test_expect_success 'test submodule set-branch --default' ' + (cd super && + git submodule set-branch --default submodule && + ! grep branch .gitmodules && + git submodule update --remote && + cat <<-\EOF >expect && + a + EOF + git -C submodule show -s --pretty=%s >actual && + test_cmp expect actual + ) +' + +test_expect_success 'test submodule set-branch -b' ' + (cd super && + git submodule set-branch -b topic submodule && + grep "branch = topic" .gitmodules && + git submodule update --remote && + cat <<-\EOF >expect && + b + EOF + git -C submodule show -s --pretty=%s >actual && + test_cmp expect actual + ) +' + +test_expect_success 'test submodule set-branch -d' ' + (cd super && + git submodule set-branch -d submodule && + ! grep branch .gitmodules && + git submodule update --remote && + cat <<-\EOF >expect && + a + EOF + git -C submodule show -s --pretty=%s >actual && + test_cmp expect actual + ) +' + +test_done diff --git a/t/t7420-submodule-set-url.sh b/t/t7420-submodule-set-url.sh new file mode 100755 index 0000000..ef0cb6e --- /dev/null +++ b/t/t7420-submodule-set-url.sh @@ -0,0 +1,55 @@ +#!/bin/sh +# +# Copyright (c) 2019 Denton Liu +# + +test_description='Test submodules set-url subcommand + +This test verifies that the set-url subcommand of git-submodule is working +as expected. +' + +TEST_NO_CREATE_REPO=1 +. ./test-lib.sh + +test_expect_success 'submodule config cache setup' ' + mkdir submodule && + ( + cd submodule && + git init && + echo a >file && + git add file && + git commit -ma + ) && + mkdir super && + ( + cd super && + git init && + git submodule add ../submodule && + git commit -m "add submodule" + ) +' + +test_expect_success 'test submodule set-url' ' + # add a commit and move the submodule (change the url) + ( + cd submodule && + echo b >>file && + git add file && + git commit -mb + ) && + mv submodule newsubmodule && + + git -C newsubmodule show >expect && + ( + cd super && + test_must_fail git submodule update --remote && + git submodule set-url submodule ../newsubmodule && + grep -F "url = ../newsubmodule" .gitmodules && + git submodule update --remote + ) && + git -C super/submodule show >actual && + test_cmp expect actual +' + +test_done diff --git a/t/t7500-commit-template-squash-signoff.sh b/t/t7500-commit-template-squash-signoff.sh index 46a5cd4..6d19ece 100755 --- a/t/t7500-commit-template-squash-signoff.sh +++ b/t/t7500-commit-template-squash-signoff.sh @@ -382,4 +382,13 @@ test_expect_success 'check commit with unstaged rename and copy' ' ) ' +test_expect_success 'commit without staging files fails and displays hints' ' + echo "initial" >file && + git add file && + git commit -m initial && + echo "changes" >>file && + test_must_fail git commit -m update >actual && + test_i18ngrep "no changes added to commit (use \"git add\" and/or \"git commit -a\")" actual +' + test_done diff --git a/t/t7501-commit-basic-functionality.sh b/t/t7501-commit-basic-functionality.sh index f1349af..110b4bf 100755 --- a/t/t7501-commit-basic-functionality.sh +++ b/t/t7501-commit-basic-functionality.sh @@ -150,7 +150,7 @@ test_expect_success 'setup: commit message from file' ' test_expect_success 'amend commit' ' cat >editor <<-\EOF && #!/bin/sh - sed -e "s/a file/an amend commit/g" < "$1" > "$1-" + sed -e "s/a file/an amend commit/g" <"$1" >"$1-" mv "$1-" "$1" EOF chmod 755 editor && @@ -263,7 +263,7 @@ test_expect_success 'using message from other commit' ' test_expect_success 'editing message from other commit' ' cat >editor <<-\EOF && #!/bin/sh - sed -e "s/amend/older/g" < "$1" > "$1-" + sed -e "s/amend/older/g" <"$1" >"$1-" mv "$1-" "$1" EOF chmod 755 editor && @@ -285,9 +285,8 @@ test_expect_success 'overriding author from command line' ' ' test_expect_success PERL 'interactive add' ' - echo 7 | - git commit --interactive | - grep "What now" + echo 7 | test_must_fail git commit --interactive >out && + grep "What now" out ' test_expect_success PERL "commit --interactive doesn't change index if editor aborts" ' @@ -362,12 +361,12 @@ test_expect_success 'amend commit to fix author' ' oldtick=$GIT_AUTHOR_DATE && test_tick && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $oldtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --author="$author" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' @@ -377,12 +376,12 @@ test_expect_success 'amend commit to fix date' ' test_tick && newtick=$GIT_AUTHOR_DATE && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $newtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --date="$newtick" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' @@ -409,12 +408,13 @@ test_expect_success 'sign off (1)' ' echo 1 >positive && git add positive && git commit -s -m "thank you" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo thank you && echo && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual @@ -428,13 +428,14 @@ test_expect_success 'sign off (2)' ' git commit -s -m "thank you $existing" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo thank you && echo && echo $existing && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual @@ -448,13 +449,14 @@ test_expect_success 'signoff gap' ' git commit -s -m "welcome $alt" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo welcome && echo && echo $alt && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual ' @@ -468,15 +470,16 @@ test_expect_success 'signoff gap 2' ' We have now $alt" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo welcome && echo && echo We have now && echo $alt && echo && - git var GIT_COMMITTER_IDENT | - sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" -e "s/^/Signed-off-by: /" ident ) >expected && test_cmp expected actual ' @@ -489,7 +492,8 @@ test_expect_success 'signoff respects trailer config' ' non-trailer line Myfooter: x" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo subject && echo && @@ -506,7 +510,8 @@ Myfooter: x" && non-trailer line Myfooter: x" && - git cat-file commit HEAD | sed -e "1,/^\$/d" > actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo subject && echo && @@ -538,7 +543,8 @@ test_expect_success 'multiple -m' ' >negative && git add negative && git commit -m "one" -m "two" -m "three" && - git cat-file commit HEAD | sed -e "1,/^\$/d" >actual && + git cat-file commit HEAD >commit && + sed -e "1,/^\$/d" commit >actual && ( echo one && echo && @@ -555,23 +561,25 @@ test_expect_success 'amend commit to fix author' ' oldtick=$GIT_AUTHOR_DATE && test_tick && git reset --hard && - git cat-file -p HEAD | + git cat-file -p HEAD >commit && sed -e "s/author.*/author $author $oldtick/" \ - -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" > \ - expected && + -e "s/^\(committer.*> \).*$/\1$GIT_COMMITTER_DATE/" \ + commit >expected && git commit --amend --author="$author" && - git cat-file -p HEAD > current && + git cat-file -p HEAD >current && test_cmp expected current ' test_expect_success 'git commit <file> with dirty index' ' - echo tacocat > elif && - echo tehlulz > chz && + echo tacocat >elif && + echo tehlulz >chz && git add chz && git commit elif -m "tacocat is a palindrome" && - git show --stat | grep elif && - git diff --cached | grep chz + git show --stat >stat && + grep elif stat && + git diff --cached >diff && + grep chz diff ' test_expect_success 'same tree (single parent)' ' @@ -584,7 +592,8 @@ test_expect_success 'same tree (single parent)' ' test_expect_success 'same tree (single parent) --allow-empty' ' git commit --allow-empty -m "forced empty" && - git cat-file commit HEAD | grep forced + git cat-file commit HEAD >commit && + grep forced commit ' diff --git a/t/t7502-commit-porcelain.sh b/t/t7502-commit-porcelain.sh index ca4a740..14c92e4 100755 --- a/t/t7502-commit-porcelain.sh +++ b/t/t7502-commit-porcelain.sh @@ -16,7 +16,8 @@ commit_msg_is () { # Arguments: [<prefix] [<commit message>] [<commit options>] check_summary_oneline() { test_tick && - git commit ${3+"$3"} -m "$2" | head -1 > act && + git commit ${3+"$3"} -m "$2" >raw && + head -n 1 raw >act && # branch name SUMMARY_PREFIX="$(git name-rev --name-only HEAD)" && @@ -68,7 +69,7 @@ test_expect_success 'output summary format for merges' ' git checkout recursive-a && test_must_fail git merge recursive-b && # resolve the conflict - echo commit-a > file1 && + echo commit-a >file1 && git add file1 && check_summary_oneline "" "Merge" ' @@ -142,9 +143,11 @@ test_expect_success 'sign off' ' >positive && git add positive && git commit -s -m "thank you" && - actual=$(git cat-file commit HEAD | sed -ne "s/Signed-off-by: //p") && - expected=$(git var GIT_COMMITTER_IDENT | sed -e "s/>.*/>/") && - test "z$actual" = "z$expected" + git cat-file commit HEAD >commit.msg && + sed -ne "s/Signed-off-by: //p" commit.msg >actual && + git var GIT_COMMITTER_IDENT >ident && + sed -e "s/>.*/>/" ident >expected && + test_cmp expected actual ' @@ -153,8 +156,8 @@ test_expect_success 'multiple -m' ' >negative && git add negative && git commit -m "one" -m "two" -m "three" && - actual=$(git cat-file commit HEAD | sed -e "1,/^\$/d") && - expected=$(echo one; echo; echo two; echo; echo three) && + actual=$(git cat-file commit HEAD >tmp && sed -e "1,/^\$/d" tmp && rm tmp) && + expected=$(test_write_lines "one" "" "two" "" "three") && test "z$actual" = "z$expected" ' @@ -163,7 +166,8 @@ test_expect_success 'verbose' ' echo minus >negative && git add negative && - git status -v | sed -ne "/^diff --git /p" >actual && + git status -v >raw && + sed -ne "/^diff --git /p" raw >actual && echo "diff --git a/negative b/negative" >expect && test_cmp expect actual @@ -189,7 +193,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-t)' ' echo >>negative && git commit --cleanup=verbatim --no-status -t expect -a && - git cat-file -p HEAD |sed -e "1,/^\$/d" >actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -198,7 +203,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-F)' ' echo >>negative && git commit --cleanup=verbatim -F expect -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -207,7 +213,8 @@ test_expect_success 'cleanup commit messages (verbatim option,-m)' ' echo >>negative && git commit --cleanup=verbatim -m "$mesg_with_comment_and_newlines" -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -215,10 +222,11 @@ test_expect_success 'cleanup commit messages (verbatim option,-m)' ' test_expect_success 'cleanup commit messages (whitespace option,-F)' ' echo >>negative && - { echo;echo "# text";echo; } >text && + test_write_lines "" "# text" "" >text && echo "# text" >expect && git commit --cleanup=whitespace -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -226,48 +234,51 @@ test_expect_success 'cleanup commit messages (whitespace option,-F)' ' test_expect_success 'cleanup commit messages (scissors option,-F,-e)' ' echo >>negative && - cat >text <<EOF && + cat >text <<-\EOF && -# to be kept + # to be kept - # ------------------------ >8 ------------------------ -# to be kept, too -# ------------------------ >8 ------------------------ -to be removed -# ------------------------ >8 ------------------------ -to be removed, too -EOF + # ------------------------ >8 ------------------------ + # to be kept, too + # ------------------------ >8 ------------------------ + to be removed + # ------------------------ >8 ------------------------ + to be removed, too + EOF - cat >expect <<EOF && -# to be kept + cat >expect <<-\EOF && + # to be kept - # ------------------------ >8 ------------------------ -# to be kept, too -EOF + # ------------------------ >8 ------------------------ + # to be kept, too + EOF git commit --cleanup=scissors -e -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' test_expect_success 'cleanup commit messages (scissors option,-F,-e, scissors on first line)' ' echo >>negative && - cat >text <<EOF && -# ------------------------ >8 ------------------------ -to be removed -EOF + cat >text <<-\EOF && + # ------------------------ >8 ------------------------ + to be removed + EOF git commit --cleanup=scissors -e -F text -a --allow-empty-message && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_must_be_empty actual ' test_expect_success 'cleanup commit messages (strip option,-F)' ' echo >>negative && - { echo;echo "# text";echo sample;echo; } >text && + test_write_lines "" "# text" "sample" "" >text && echo sample >expect && git commit --cleanup=strip -F text -a && - git cat-file -p HEAD |sed -e "1,/^\$/d">actual && + git cat-file -p HEAD >raw && + sed -e "1,/^\$/d" raw >actual && test_cmp expect actual ' @@ -275,7 +286,7 @@ test_expect_success 'cleanup commit messages (strip option,-F)' ' test_expect_success 'cleanup commit messages (strip option,-F,-e)' ' echo >>negative && - { echo;echo sample;echo; } >text && + test_write_lines "" "sample" "" >text && git commit -e -F text -a && head -n 4 .git/COMMIT_EDITMSG >actual ' @@ -387,11 +398,11 @@ test_expect_success AUTOIDENT 'message shows committer when it is automatic' ' ' write_script .git/FAKE_EDITOR <<EOF -echo editor started > "$(pwd)/.git/result" +echo editor started >"$(pwd)/.git/result" exit 0 EOF -test_expect_success !AUTOIDENT 'do not fire editor when committer is bogus' ' +test_expect_success !FAIL_PREREQS,!AUTOIDENT 'do not fire editor when committer is bogus' ' >.git/result && echo >>negative && @@ -455,7 +466,7 @@ EOF test_expect_success EXECKEEPSPID 'a SIGTERM should break locks' ' echo >>negative && ! "$SHELL_PATH" -c '\'' - echo kill -TERM $$ >> .git/FAKE_EDITOR + echo kill -TERM $$ >>.git/FAKE_EDITOR GIT_EDITOR=.git/FAKE_EDITOR export GIT_EDITOR exec git commit -a'\'' && @@ -471,7 +482,8 @@ test_expect_success 'Hand committing of a redundant merge removes dups' ' test_must_fail git merge second master && git checkout master g && EDITOR=: git commit -a && - git cat-file commit HEAD | sed -n -e "s/^parent //p" -e "/^$/q" >actual && + git cat-file commit HEAD >raw && + sed -n -e "s/^parent //p" -e "/^$/q" raw >actual && test_cmp expect actual ' @@ -480,7 +492,8 @@ test_expect_success 'A single-liner subject with a token plus colon is not a foo git reset --hard && git commit -s -m "hello: kitty" --allow-empty && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_line_count = 3 actual ' diff --git a/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh b/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh new file mode 100755 index 0000000..b348545 --- /dev/null +++ b/t/t7503-pre-commit-and-pre-merge-commit-hooks.sh @@ -0,0 +1,281 @@ +#!/bin/sh + +test_description='pre-commit and pre-merge-commit hooks' + +. ./test-lib.sh + +HOOKDIR="$(git rev-parse --git-dir)/hooks" +PRECOMMIT="$HOOKDIR/pre-commit" +PREMERGE="$HOOKDIR/pre-merge-commit" + +# Prepare sample scripts that write their $0 to actual_hooks +test_expect_success 'sample script setup' ' + mkdir -p "$HOOKDIR" && + write_script "$HOOKDIR/success.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 0 + EOF + write_script "$HOOKDIR/fail.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 1 + EOF + write_script "$HOOKDIR/non-exec.sample" <<-\EOF && + echo $0 >>actual_hooks + exit 1 + EOF + chmod -x "$HOOKDIR/non-exec.sample" && + write_script "$HOOKDIR/require-prefix.sample" <<-\EOF && + echo $0 >>actual_hooks + test $GIT_PREFIX = "success/" + EOF + write_script "$HOOKDIR/check-author.sample" <<-\EOF + echo $0 >>actual_hooks + test "$GIT_AUTHOR_NAME" = "New Author" && + test "$GIT_AUTHOR_EMAIL" = "newauthor@example.com" + EOF +' + +test_expect_success 'root commit' ' + echo "root" >file && + git add file && + git commit -m "zeroth" && + git checkout -b side && + echo "foo" >foo && + git add foo && + git commit -m "make it non-ff" && + git branch side-orig side && + git checkout master +' + +test_expect_success 'setup conflicting branches' ' + test_when_finished "git checkout master" && + git checkout -b conflicting-a master && + echo a >conflicting && + git add conflicting && + git commit -m conflicting-a && + git checkout -b conflicting-b master && + echo b >conflicting && + git add conflicting && + git commit -m conflicting-b +' + +test_expect_success 'with no hook' ' + test_when_finished "rm -f actual_hooks" && + echo "foo" >file && + git add file && + git commit -m "first" && + test_path_is_missing actual_hooks +' + +test_expect_success 'with no hook (merge)' ' + test_when_finished "rm -f actual_hooks" && + git branch -f side side-orig && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with no hook' ' + test_when_finished "rm -f actual_hooks" && + echo "bar" >file && + git add file && + git commit --no-verify -m "bar" && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with no hook (merge)' ' + test_when_finished "rm -f actual_hooks" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with succeeding hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more" >>file && + git add file && + git commit -m "more" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'with succeeding hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" expected_hooks actual_hooks" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + echo "$PREMERGE" >expected_hooks && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'automatic merge fails; both hooks are available' ' + test_when_finished "rm -f \"$PREMERGE\" \"$PRECOMMIT\"" && + test_when_finished "rm -f expected_hooks actual_hooks" && + test_when_finished "git checkout master" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + + git checkout conflicting-a && + test_must_fail git merge -m "merge conflicting-b" conflicting-b && + test_path_is_missing actual_hooks && + + echo "$PRECOMMIT" >expected_hooks && + echo a+b >conflicting && + git add conflicting && + git commit -m "resolve conflict" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with succeeding hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/success.sample" "$PRECOMMIT" && + echo "even more" >>file && + git add file && + git commit --no-verify -m "even more" && + test_path_is_missing actual_hooks +' + +test_expect_success '--no-verify with succeeding hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/success.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with failing hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "another" >>file && + git add file && + test_must_fail git commit -m "another" && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with failing hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PRECOMMIT" && + echo "stuff" >>file && + git add file && + git commit --no-verify -m "stuff" && + test_path_is_missing actual_hooks +' + +test_expect_success 'with failing hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" expected_hooks actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PREMERGE" && + echo "$PREMERGE" >expected_hooks && + git checkout side && + test_must_fail git merge -m "merge master" master && + git checkout master && + test_cmp expected_hooks actual_hooks +' + +test_expect_success '--no-verify with failing hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/fail.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM 'with non-executable hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PRECOMMIT" && + echo "content" >>file && + git add file && + git commit -m "content" && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM '--no-verify with non-executable hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PRECOMMIT" && + echo "more content" >>file && + git add file && + git commit --no-verify -m "more content" && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM 'with non-executable hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success POSIXPERM '--no-verify with non-executable hook (merge)' ' + test_when_finished "rm -f \"$PREMERGE\" actual_hooks" && + cp "$HOOKDIR/non-exec.sample" "$PREMERGE" && + git branch -f side side-orig && + git checkout side && + git merge --no-verify -m "merge master" master && + git checkout master && + test_path_is_missing actual_hooks +' + +test_expect_success 'with hook requiring GIT_PREFIX' ' + test_when_finished "rm -rf \"$PRECOMMIT\" expected_hooks actual_hooks success" && + cp "$HOOKDIR/require-prefix.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more content" >>file && + git add file && + mkdir success && + ( + cd success && + git commit -m "hook requires GIT_PREFIX = success/" + ) && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'with failing hook requiring GIT_PREFIX' ' + test_when_finished "rm -rf \"$PRECOMMIT\" expected_hooks actual_hooks fail" && + cp "$HOOKDIR/require-prefix.sample" "$PRECOMMIT" && + echo "$PRECOMMIT" >expected_hooks && + echo "more content" >>file && + git add file && + mkdir fail && + ( + cd fail && + test_must_fail git commit -m "hook must fail" + ) && + git checkout -- file && + test_cmp expected_hooks actual_hooks +' + +test_expect_success 'check the author in hook' ' + test_when_finished "rm -f \"$PRECOMMIT\" expected_hooks actual_hooks" && + cp "$HOOKDIR/check-author.sample" "$PRECOMMIT" && + cat >expected_hooks <<-EOF && + $PRECOMMIT + $PRECOMMIT + $PRECOMMIT + EOF + test_must_fail git commit --allow-empty -m "by a.u.thor" && + ( + GIT_AUTHOR_NAME="New Author" && + GIT_AUTHOR_EMAIL="newauthor@example.com" && + export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && + git commit --allow-empty -m "by new.author via env" && + git show -s + ) && + git commit --author="New Author <newauthor@example.com>" \ + --allow-empty -m "by new.author via command line" && + git show -s && + test_cmp expected_hooks actual_hooks +' + +test_done diff --git a/t/t7503-pre-commit-hook.sh b/t/t7503-pre-commit-hook.sh deleted file mode 100755 index 984889b..0000000 --- a/t/t7503-pre-commit-hook.sh +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh - -test_description='pre-commit hook' - -. ./test-lib.sh - -test_expect_success 'with no hook' ' - - echo "foo" > file && - git add file && - git commit -m "first" - -' - -test_expect_success '--no-verify with no hook' ' - - echo "bar" > file && - git add file && - git commit --no-verify -m "bar" - -' - -# now install hook that always succeeds -HOOKDIR="$(git rev-parse --git-dir)/hooks" -HOOK="$HOOKDIR/pre-commit" -mkdir -p "$HOOKDIR" -cat > "$HOOK" <<EOF -#!/bin/sh -exit 0 -EOF -chmod +x "$HOOK" - -test_expect_success 'with succeeding hook' ' - - echo "more" >> file && - git add file && - git commit -m "more" - -' - -test_expect_success '--no-verify with succeeding hook' ' - - echo "even more" >> file && - git add file && - git commit --no-verify -m "even more" - -' - -# now a hook that fails -cat > "$HOOK" <<EOF -#!/bin/sh -exit 1 -EOF - -test_expect_success 'with failing hook' ' - - echo "another" >> file && - git add file && - test_must_fail git commit -m "another" - -' - -test_expect_success '--no-verify with failing hook' ' - - echo "stuff" >> file && - git add file && - git commit --no-verify -m "stuff" - -' - -chmod -x "$HOOK" -test_expect_success POSIXPERM 'with non-executable hook' ' - - echo "content" >> file && - git add file && - git commit -m "content" - -' - -test_expect_success POSIXPERM '--no-verify with non-executable hook' ' - - echo "more content" >> file && - git add file && - git commit --no-verify -m "more content" - -' -chmod +x "$HOOK" - -# a hook that checks $GIT_PREFIX and succeeds inside the -# success/ subdirectory only -cat > "$HOOK" <<EOF -#!/bin/sh -test \$GIT_PREFIX = success/ -EOF - -test_expect_success 'with hook requiring GIT_PREFIX' ' - - echo "more content" >> file && - git add file && - mkdir success && - ( - cd success && - git commit -m "hook requires GIT_PREFIX = success/" - ) && - rmdir success -' - -test_expect_success 'with failing hook requiring GIT_PREFIX' ' - - echo "more content" >> file && - git add file && - mkdir fail && - ( - cd fail && - test_must_fail git commit -m "hook must fail" - ) && - rmdir fail && - git checkout -- file -' - -test_expect_success 'check the author in hook' ' - write_script "$HOOK" <<-\EOF && - test "$GIT_AUTHOR_NAME" = "New Author" && - test "$GIT_AUTHOR_EMAIL" = "newauthor@example.com" - EOF - test_must_fail git commit --allow-empty -m "by a.u.thor" && - ( - GIT_AUTHOR_NAME="New Author" && - GIT_AUTHOR_EMAIL="newauthor@example.com" && - export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && - git commit --allow-empty -m "by new.author via env" && - git show -s - ) && - git commit --author="New Author <newauthor@example.com>" \ - --allow-empty -m "by new.author via command line" && - git show -s -' - -test_done diff --git a/t/t7505-prepare-commit-msg-hook.sh b/t/t7505-prepare-commit-msg-hook.sh index ebfcad9..94f85cd 100755 --- a/t/t7505-prepare-commit-msg-hook.sh +++ b/t/t7505-prepare-commit-msg-hook.sh @@ -215,7 +215,7 @@ test_expect_success 'with hook and editor (merge)' ' test_rebase () { expect=$1 && mode=$2 && - test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase $mode)" ' + test_expect_$expect C_LOCALE_OUTPUT "with hook (rebase ${mode:--i})" ' test_when_finished "\ git rebase --abort git checkout -f master @@ -225,7 +225,7 @@ test_rebase () { GIT_EDITOR="\"$FAKE_EDITOR\"" && ( export GIT_SEQUENCE_EDITOR GIT_EDITOR && - test_must_fail git rebase $mode b && + test_must_fail git rebase -i $mode b && echo x >a && git add a && test_must_fail git rebase --continue && @@ -241,18 +241,12 @@ test_rebase () { git add b && git rebase --continue ) && - if test $mode = -p # reword amended after pick - then - n=18 - else - n=17 - fi && - git log --pretty=%s -g -n$n HEAD@{1} >actual && - test_cmp "$TEST_DIRECTORY/t7505/expected-rebase$mode" actual + git log --pretty=%s -g -n18 HEAD@{1} >actual && + test_cmp "$TEST_DIRECTORY/t7505/expected-rebase${mode:--i}" actual ' } -test_rebase success -i +test_rebase success test_have_prereq !REBASE_P || test_rebase success -p test_expect_success 'with hook (cherry-pick)' ' diff --git a/t/t7505/expected-rebase-i b/t/t7505/expected-rebase-i index c514bdb..93bada5 100644 --- a/t/t7505/expected-rebase-i +++ b/t/t7505/expected-rebase-i @@ -7,7 +7,8 @@ message (no editor) [edit rebase-10] message [fixup rebase-9] message (no editor) [fixup rebase-8] message (no editor) [squash rebase-7] -message [reword rebase-6] +HEAD [reword rebase-6] +message (no editor) [reword rebase-6] message [squash rebase-5] message (no editor) [fixup rebase-4] message (no editor) [pick rebase-3] diff --git a/t/t7508-status.sh b/t/t7508-status.sh index e1f1129..482ce35 100755 --- a/t/t7508-status.sh +++ b/t/t7508-status.sh @@ -94,19 +94,16 @@ test_expect_success 'status --column' ' # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) -# +# (use "git restore --staged <file>..." to unstage) # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) -# +# (use "git restore <file>..." to discard changes in working directory) # modified: dir1/modified # # Untracked files: # (use "git add <file>..." to include in what will be committed) -# # dir1/untracked dir2/untracked # dir2/modified untracked # @@ -128,19 +125,16 @@ cat >expect <<\EOF # (use "git pull" to merge the remote branch into yours) # # Changes to be committed: -# (use "git reset HEAD <file>..." to unstage) -# +# (use "git restore --staged <file>..." to unstage) # new file: dir2/added # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) -# (use "git checkout -- <file>..." to discard changes in working directory) -# +# (use "git restore <file>..." to discard changes in working directory) # modified: dir1/modified # # Untracked files: # (use "git add <file>..." to include in what will be committed) -# # dir1/untracked # dir2/modified # dir2/untracked @@ -278,24 +272,20 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir2/modified Ignored files: (use "git add -f <file>..." to include in what will be committed) - .gitignore dir1/untracked dir2/untracked @@ -347,19 +337,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Ignored files: (use "git add -f <file>..." to include in what will be committed) - .gitignore dir1/untracked dir2/modified @@ -420,14 +407,12 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files not listed (use -u option to show untracked files) @@ -484,19 +469,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -542,19 +524,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -605,19 +584,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: ../dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: modified Untracked files: (use "git add <file>..." to include in what will be committed) - untracked ../dir2/modified ../dir2/untracked @@ -676,19 +652,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) <GREEN>new file: dir2/added<RESET> Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) <RED>modified: dir1/modified<RESET> Untracked files: (use "git add <file>..." to include in what will be committed) - <BLUE>dir1/untracked<RESET> <BLUE>dir2/modified<RESET> <BLUE>dir2/untracked<RESET> @@ -802,19 +775,16 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -852,13 +822,11 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/ untracked @@ -896,20 +864,17 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -956,15 +921,13 @@ and have 1 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -974,7 +937,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1019,13 +981,11 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1068,15 +1028,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD^1 <file>..." to unstage) - + (use "git restore --source=HEAD^1 --staged <file>..." to unstage) new file: dir2/added new file: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -1086,7 +1044,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - dir1/untracked dir2/modified dir2/untracked @@ -1123,14 +1080,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Submodule changes to be committed: @@ -1140,7 +1095,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1235,15 +1189,13 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) + (use "git restore <file>..." to discard changes in working directory) (commit or discard the untracked or modified content in submodules) - modified: dir1/modified modified: sm (modified content) @@ -1254,7 +1206,6 @@ Submodule changes to be committed: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1295,14 +1246,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified modified: sm (new commits) @@ -1318,7 +1267,6 @@ Submodules changed but not updated: Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1379,14 +1327,12 @@ cat > expect << EOF ; (use "git pull" to merge the remote branch into yours) ; ; Changes to be committed: -; (use "git reset HEAD <file>..." to unstage) -; +; (use "git restore --staged <file>..." to unstage) ; modified: sm ; ; Changes not staged for commit: ; (use "git add <file>..." to update what will be committed) -; (use "git checkout -- <file>..." to discard changes in working directory) -; +; (use "git restore <file>..." to discard changes in working directory) ; modified: dir1/modified ; modified: sm (new commits) ; @@ -1402,7 +1348,6 @@ cat > expect << EOF ; ; Untracked files: ; (use "git add <file>..." to include in what will be committed) -; ; .gitmodules ; dir1/untracked ; dir2/modified @@ -1431,13 +1376,11 @@ and have 2 and 2 different commits each, respectively. Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1458,19 +1401,16 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files: (use "git add <file>..." to include in what will be committed) - .gitmodules dir1/untracked dir2/modified @@ -1581,14 +1521,12 @@ and have 2 and 2 different commits each, respectively. (use "git pull" to merge the remote branch into yours) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: sm Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: dir1/modified Untracked files not listed (use -u option to show untracked files) @@ -1633,7 +1571,7 @@ test_expect_success '"status.showStash=true" weaker than "--no-show-stash"' ' test_cmp expected_without_stash actual ' -test_expect_success 'no additionnal info if no stash entries' ' +test_expect_success 'no additional info if no stash entries' ' git stash clear && git -c status.showStash=true status >actual && test_cmp expected_without_stash actual diff --git a/t/t7510-signed-commit.sh b/t/t7510-signed-commit.sh index 86d3f93..0c06d22 100755 --- a/t/t7510-signed-commit.sh +++ b/t/t7510-signed-commit.sh @@ -49,15 +49,28 @@ test_expect_success GPG 'create signed commits' ' git tag eighth-signed-alt && # commit.gpgsign is still on but this must not be signed - git tag ninth-unsigned $(echo 9 | git commit-tree HEAD^{tree}) && + echo 9 | git commit-tree HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag ninth-unsigned $(cat oid) && # explicit -S of course must sign. - git tag tenth-signed $(echo 9 | git commit-tree -S HEAD^{tree}) + echo 10 | git commit-tree -S HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag tenth-signed $(cat oid) && + + # --gpg-sign[=<key-id>] must sign. + echo 11 | git commit-tree --gpg-sign HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag eleventh-signed $(cat oid) && + echo 12 | git commit-tree --gpg-sign=B7227189 HEAD^{tree} >oid && + test_line_count = 1 oid && + git tag twelfth-signed-alt $(cat oid) ' test_expect_success GPG 'verify and show signatures' ' ( for commit in initial second merge fourth-signed \ - fifth-signed sixth-signed seventh-signed tenth-signed + fifth-signed sixth-signed seventh-signed tenth-signed \ + eleventh-signed do git verify-commit $commit && git show --pretty=short --show-signature $commit >actual && @@ -78,7 +91,7 @@ test_expect_success GPG 'verify and show signatures' ' done ) && ( - for commit in eighth-signed-alt + for commit in eighth-signed-alt twelfth-signed-alt do git show --pretty=short --show-signature $commit >actual && grep "Good signature from" actual && @@ -96,6 +109,21 @@ test_expect_success GPG 'verify-commit exits success on untrusted signature' ' grep "not certified" actual ' +test_expect_success GPG 'verify-commit exits success with matching minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + git verify-commit sixth-signed +' + +test_expect_success GPG 'verify-commit exits success with low minTrustLevel' ' + test_config gpg.minTrustLevel fully && + git verify-commit sixth-signed +' + +test_expect_success GPG 'verify-commit exits failure with high minTrustLevel' ' + test_config gpg.minTrustLevel ultimate && + test_must_fail git verify-commit eighth-signed-alt +' + test_expect_success GPG 'verify signatures with --raw' ' ( for commit in initial second merge fourth-signed fifth-signed sixth-signed seventh-signed @@ -206,6 +234,30 @@ test_expect_success GPG 'show untrusted signature with custom format' ' test_cmp expect actual ' +test_expect_success GPG 'show untrusted signature with undefined trust level' ' + cat >expect <<-\EOF && + undefined + 65A0EEA02E30CAD7 + Eris Discordia <discord@example.net> + F8364A59E07FFE9F4D63005A65A0EEA02E30CAD7 + D4BE22311AD3131E5EDA29A461092E85B7227189 + EOF + git log -1 --format="%GT%n%GK%n%GS%n%GF%n%GP" eighth-signed-alt >actual && + test_cmp expect actual +' + +test_expect_success GPG 'show untrusted signature with ultimate trust level' ' + cat >expect <<-\EOF && + ultimate + 13B6F51ECDDE430D + C O Mitter <committer@example.com> + 73D758744BE721698EC54E8713B6F51ECDDE430D + 73D758744BE721698EC54E8713B6F51ECDDE430D + EOF + git log -1 --format="%GT%n%GK%n%GS%n%GF%n%GP" sixth-signed >actual && + test_cmp expect actual +' + test_expect_success GPG 'show unknown signature with custom format' ' cat >expect <<-\EOF && E diff --git a/t/t7512-status-help.sh b/t/t7512-status-help.sh index 458608c..29518e0 100755 --- a/t/t7512-status-help.sh +++ b/t/t7512-status-help.sh @@ -33,7 +33,6 @@ You have unmerged paths. Unmerged paths: (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -54,7 +53,6 @@ All conflicts fixed but you are still merging. (use "git commit" to conclude merge) Changes to be committed: - modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -73,10 +71,10 @@ test_expect_success 'prepare for rebase conflicts' ' ' -test_expect_success 'status when rebase in progress before resolving conflicts' ' +test_expect_success 'status when rebase --apply in progress before resolving conflicts' ' test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && cat >expected <<EOF && rebase in progress; onto $ONTO You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. @@ -85,9 +83,8 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -97,11 +94,11 @@ EOF ' -test_expect_success 'status when rebase in progress before rebase --continue' ' +test_expect_success 'status when rebase --apply in progress before rebase --continue' ' git reset --hard rebase_conflicts && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && echo three >main.txt && git add main.txt && cat >expected <<EOF && @@ -110,8 +107,7 @@ You are currently rebasing branch '\''rebase_conflicts'\'' on '\''$ONTO'\''. (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -148,9 +144,8 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (use "git rebase --abort" to check out the original branch) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -176,8 +171,7 @@ You are currently rebasing branch '\''rebase_i_conflicts_second'\'' on '\''$ONTO (all conflicts fixed: run "git rebase --continue") Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -246,8 +240,7 @@ You are currently splitting a commit while rebasing branch '\''split_commit'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -354,8 +347,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -453,8 +445,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -557,8 +548,7 @@ You are currently splitting a commit while rebasing branch '\''several_edits'\'' Changes not staged for commit: (use "git add <file>..." to update what will be committed) - (use "git checkout -- <file>..." to discard changes in working directory) - + (use "git restore <file>..." to discard changes in working directory) modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -698,7 +688,7 @@ EOF ' -test_expect_success 'status when rebase conflicts with statushints disabled' ' +test_expect_success 'status when rebase --apply conflicts with statushints disabled' ' git reset --hard master && git checkout -b statushints_disabled && test_when_finished "git config --local advice.statushints true" && @@ -708,7 +698,7 @@ test_expect_success 'status when rebase conflicts with statushints disabled' ' test_commit three_statushints main.txt three && test_when_finished "git rebase --abort" && ONTO=$(git rev-parse --short HEAD^^) && - test_must_fail git rebase HEAD^ --onto HEAD^^ && + test_must_fail git rebase --apply HEAD^ --onto HEAD^^ && cat >expected <<EOF && rebase in progress; onto $ONTO You are currently rebasing branch '\''statushints_disabled'\'' on '\''$ONTO'\''. @@ -743,11 +733,11 @@ test_expect_success 'status when cherry-picking before resolving conflicts' ' On branch cherry_branch You are currently cherry-picking commit $TO_CHERRY_PICK. (fix conflicts and run "git cherry-pick --continue") + (use "git cherry-pick --skip" to skip this patch) (use "git cherry-pick --abort" to cancel the cherry-pick operation) Unmerged paths: (use "git add <file>..." to mark resolution) - both modified: main.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -768,10 +758,10 @@ test_expect_success 'status when cherry-picking after resolving conflicts' ' On branch cherry_branch You are currently cherry-picking commit $TO_CHERRY_PICK. (all conflicts fixed: run "git cherry-pick --continue") + (use "git cherry-pick --skip" to skip this patch) (use "git cherry-pick --abort" to cancel the cherry-pick operation) Changes to be committed: - modified: main.txt Untracked files not listed (use -u option to show untracked files) @@ -780,6 +770,41 @@ EOF test_i18ncmp expected actual ' +test_expect_success 'status when cherry-picking after committing conflict resolution' ' + git reset --hard cherry_branch && + test_when_finished "git cherry-pick --abort" && + test_must_fail git cherry-pick cherry_branch_second one_cherry && + echo end >main.txt && + git commit -a && + cat >expected <<EOF && +On branch cherry_branch +Cherry-pick currently in progress. + (run "git cherry-pick --continue" to continue) + (use "git cherry-pick --skip" to skip this patch) + (use "git cherry-pick --abort" to cancel the cherry-pick operation) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + +test_expect_success 'status shows cherry-pick with invalid oid' ' + mkdir .git/sequencer && + test_write_lines "pick invalid-oid" >.git/sequencer/todo && + git status --untracked-files=no >actual 2>err && + git cherry-pick --quit && + test_must_be_empty err && + test_i18ncmp expected actual +' + +test_expect_success 'status does not show error if .git/sequencer is a file' ' + test_when_finished "rm .git/sequencer" && + test_write_lines hello >.git/sequencer && + git status --untracked-files=no 2>err && + test_must_be_empty err +' + test_expect_success 'status showing detached at and from a tag' ' test_commit atag tagging && git checkout atag && @@ -813,12 +838,12 @@ test_expect_success 'status while reverting commit (conflicts)' ' On branch master You are currently reverting commit $TO_REVERT. (fix conflicts and run "git revert --continue") + (use "git revert --skip" to skip this patch) (use "git revert --abort" to cancel the revert operation) Unmerged paths: - (use "git reset HEAD <file>..." to unstage) + (use "git restore --staged <file>..." to unstage) (use "git add <file>..." to mark resolution) - both modified: to-revert.txt no changes added to commit (use "git add" and/or "git commit -a") @@ -834,11 +859,11 @@ test_expect_success 'status while reverting commit (conflicts resolved)' ' On branch master You are currently reverting commit $TO_REVERT. (all conflicts fixed: run "git revert --continue") + (use "git revert --skip" to skip this patch) (use "git revert --abort" to cancel the revert operation) Changes to be committed: - (use "git reset HEAD <file>..." to unstage) - + (use "git restore --staged <file>..." to unstage) modified: to-revert.txt Untracked files not listed (use -u option to show untracked files) @@ -857,6 +882,25 @@ EOF test_i18ncmp expected actual ' +test_expect_success 'status while reverting after committing conflict resolution' ' + test_when_finished "git revert --abort" && + git reset --hard new && + test_must_fail git revert old new && + echo reverted >to-revert.txt && + git commit -a && + cat >expected <<EOF && +On branch master +Revert currently in progress. + (run "git revert --continue" to continue) + (use "git revert --skip" to skip this patch) + (use "git revert --abort" to cancel the revert operation) + +nothing to commit (use -u to show untracked files) +EOF + git status --untracked-files=no >actual && + test_i18ncmp expected actual +' + test_expect_success 'prepare for different number of commits rebased' ' git reset --hard master && git checkout -b several_commits && diff --git a/t/t7513-interpret-trailers.sh b/t/t7513-interpret-trailers.sh index c441861..6602790 100755 --- a/t/t7513-interpret-trailers.sh +++ b/t/t7513-interpret-trailers.sh @@ -538,33 +538,50 @@ test_expect_success 'with 2 files arguments' ' test_cmp expected actual ' -test_expect_success 'with message that has comments' ' - cat basic_message >message_with_comments && - sed -e "s/ Z\$/ /" >>message_with_comments <<-\EOF && - # comment - - # other comment - Cc: Z - # yet another comment - Reviewed-by: Johan - Reviewed-by: Z - # last comment - - EOF - cat basic_patch >>message_with_comments && - cat basic_message >expected && - cat >>expected <<-\EOF && - # comment - - Reviewed-by: Johan - Cc: Peff - # last comment - - EOF - cat basic_patch >>expected && - git interpret-trailers --trim-empty --trailer "Cc: Peff" message_with_comments >actual && - test_cmp expected actual -' +# Cover multiple comment characters with the same test input. +for char in "#" ";" +do + case "$char" in + "#") + # This is the default, so let's explicitly _not_ + # set any config to make sure it behaves as we expect. + ;; + *) + config="-c core.commentChar=$char" + ;; + esac + + test_expect_success "with message that has comments ($char)" ' + cat basic_message >message_with_comments && + sed -e "s/ Z\$/ /" \ + -e "s/#/$char/g" >>message_with_comments <<-EOF && + # comment + + # other comment + Cc: Z + # yet another comment + Reviewed-by: Johan + Reviewed-by: Z + # last comment + + EOF + cat basic_patch >>message_with_comments && + cat basic_message >expected && + sed -e "s/#/$char/g" >>expected <<-\EOF && + # comment + + Reviewed-by: Johan + Cc: Peff + # last comment + + EOF + cat basic_patch >>expected && + git $config interpret-trailers \ + --trim-empty --trailer "Cc: Peff" \ + message_with_comments >actual && + test_cmp expected actual + ' +done test_expect_success 'with message that has an old style conflict block' ' cat basic_message >message_with_comments && @@ -1217,7 +1234,7 @@ test_expect_success 'with simple command' ' test_cmp expected actual ' -test_expect_success 'with command using commiter information' ' +test_expect_success 'with command using committer information' ' git config trailer.sign.ifExists "addIfDifferent" && git config trailer.sign.command "echo \"\$GIT_COMMITTER_NAME <\$GIT_COMMITTER_EMAIL>\"" && cat complex_message_body >expected && diff --git a/t/t7517-per-repo-email.sh b/t/t7517-per-repo-email.sh index 231b8cc..b2401ce 100755 --- a/t/t7517-per-repo-email.sh +++ b/t/t7517-per-repo-email.sh @@ -85,4 +85,78 @@ test_expect_success REBASE_P \ test_must_fail git rebase -p master ' +test_expect_success 'author.name overrides user.name' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.name author && + test_commit author-name-override-user && + echo author user@example.com > expected-author && + echo user user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'author.email overrides user.email' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.email author@example.com && + test_commit author-email-override-user && + echo user author@example.com > expected-author && + echo user user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'committer.name overrides user.name' ' + test_config user.name user && + test_config user.email user@example.com && + test_config committer.name committer && + test_commit committer-name-override-user && + echo user user@example.com > expected-author && + echo committer user@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'committer.email overrides user.email' ' + test_config user.name user && + test_config user.email user@example.com && + test_config committer.email committer@example.com && + test_commit committer-email-override-user && + echo user user@example.com > expected-author && + echo user committer@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + +test_expect_success 'author and committer environment variables override config settings' ' + test_config user.name user && + test_config user.email user@example.com && + test_config author.name author && + test_config author.email author@example.com && + test_config committer.name committer && + test_config committer.email committer@example.com && + GIT_AUTHOR_NAME=env_author && export GIT_AUTHOR_NAME && + GIT_AUTHOR_EMAIL=env_author@example.com && export GIT_AUTHOR_EMAIL && + GIT_COMMITTER_NAME=env_commit && export GIT_COMMITTER_NAME && + GIT_COMMITTER_EMAIL=env_commit@example.com && export GIT_COMMITTER_EMAIL && + test_commit env-override-conf && + echo env_author env_author@example.com > expected-author && + echo env_commit env_commit@example.com > expected-committer && + git log --format="%an %ae" -1 > actual-author && + git log --format="%cn %ce" -1 > actual-committer && + sane_unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL && + sane_unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL && + test_cmp expected-author actual-author && + test_cmp expected-committer actual-committer +' + test_done diff --git a/t/t7519-status-fsmonitor.sh b/t/t7519-status-fsmonitor.sh index 3e0a61d..fbfdcca 100755 --- a/t/t7519-status-fsmonitor.sh +++ b/t/t7519-status-fsmonitor.sh @@ -32,11 +32,12 @@ write_integration_script () { echo "$0: exactly 2 arguments expected" exit 2 fi - if test "$1" != 1 + if test "$1" != 2 then echo "Unsupported core.fsmonitor hook version." >&2 exit 1 fi + printf "last_update_token\0" printf "untracked\0" printf "dir1/untracked\0" printf "dir2/untracked\0" @@ -106,6 +107,9 @@ EOF # test that "update-index --fsmonitor-valid" sets the fsmonitor valid bit test_expect_success 'update-index --fsmonitor-valid" sets the fsmonitor valid bit' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" + EOF git update-index --fsmonitor && git update-index --fsmonitor-valid dir1/modified && git update-index --fsmonitor-valid dir2/modified && @@ -164,6 +168,9 @@ EOF # test that newly added files are marked valid test_expect_success 'newly added files are marked valid' ' + write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" + EOF git add new && git add dir1/new && git add dir2/new && @@ -203,6 +210,7 @@ EOF # test that *only* files returned by the integration script get flagged as invalid test_expect_success '*only* files returned by the integration script get flagged as invalid' ' write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" printf "dir1/modified\0" EOF clean_repo && @@ -218,11 +226,12 @@ test_expect_success '*only* files returned by the integration script get flagged # Ensure commands that call refresh_index() to move the index back in time # properly invalidate the fsmonitor cache test_expect_success 'refresh_index() invalidates fsmonitor cache' ' - write_script .git/hooks/fsmonitor-test<<-\EOF && - EOF clean_repo && dirty_repo && + write_integration_script && git add . && + write_script .git/hooks/fsmonitor-test<<-\EOF && + EOF git commit -m "to reset" && git reset HEAD~1 && git status >actual && @@ -271,6 +280,7 @@ do # (if enabled) files unless it is told about them. test_expect_success "status doesn't detect unreported modifications" ' write_script .git/hooks/fsmonitor-test<<-\EOF && + printf "last_update_token\0" :>marker EOF clean_repo && @@ -294,7 +304,7 @@ do done done -# test that splitting the index dosn't interfere +# test that splitting the index doesn't interfere test_expect_success 'splitting the index results in the same state' ' write_integration_script && dirty_repo && @@ -346,4 +356,31 @@ test_expect_success UNTRACKED_CACHE 'ignore .git changes when invalidating UNTR' test_cmp before after ' +test_expect_success 'discard_index() also discards fsmonitor info' ' + test_config core.fsmonitor "$TEST_DIRECTORY/t7519/fsmonitor-all" && + test_might_fail git update-index --refresh && + test-tool read-cache --print-and-refresh=tracked 2 >actual && + printf "tracked is%s up to date\n" "" " not" >expect && + test_cmp expect actual +' + +# Test unstaging entries that: +# - Are not flagged with CE_FSMONITOR_VALID +# - Have a position in the index >= the number of entries present in the index +# after unstaging. +test_expect_success 'status succeeds after staging/unstaging' ' + test_create_repo fsmonitor-stage-unstage && + ( + cd fsmonitor-stage-unstage && + test_commit initial && + git update-index --fsmonitor && + removed=$(test_seq 1 100 | sed "s/^/z/") && + touch $removed && + git add $removed && + git config core.fsmonitor "$TEST_DIRECTORY/t7519/fsmonitor-env" && + FSMONITOR_LIST="$removed" git restore -S $removed && + FSMONITOR_LIST="$removed" git status + ) +' + test_done diff --git a/t/t7519/fsmonitor-all b/t/t7519/fsmonitor-all index 691bc94..94ab66b 100755 --- a/t/t7519/fsmonitor-all +++ b/t/t7519/fsmonitor-all @@ -17,7 +17,6 @@ fi if test "$1" != 1 then - echo "Unsupported core.fsmonitor hook version." >&2 exit 1 fi diff --git a/t/t7519/fsmonitor-all-v2 b/t/t7519/fsmonitor-all-v2 new file mode 100755 index 0000000..061907e --- /dev/null +++ b/t/t7519/fsmonitor-all-v2 @@ -0,0 +1,21 @@ +#!/usr/bin/perl + +use strict; +use warnings; +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 2) and since token +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 +my ($version, $last_update_token) = @ARGV; + +if ($version ne 2) { + print "Unsupported query-fsmonitor hook version '$version'.\n"; + exit 1; +} + +print "last_update_token\0/\0" diff --git a/t/t7519/fsmonitor-env b/t/t7519/fsmonitor-env new file mode 100755 index 0000000..8f1f7ab --- /dev/null +++ b/t/t7519/fsmonitor-env @@ -0,0 +1,24 @@ +#!/bin/sh +# +# An test hook script to integrate with git to test fsmonitor. +# +# The hook is passed a version (currently 1) and a time in nanoseconds +# formatted as a string and outputs to stdout all files that have been +# modified since the given time. Paths must be relative to the root of +# the working tree and separated by a single NUL. +# +#echo "$0 $*" >&2 + +if test "$#" -ne 2 +then + echo "$0: exactly 2 arguments expected" >&2 + exit 2 +fi + +if test "$1" != 1 +then + echo "Unsupported core.fsmonitor hook version." >&2 + exit 1 +fi + +printf '%s\n' $FSMONITOR_LIST diff --git a/t/t7519/fsmonitor-watchman b/t/t7519/fsmonitor-watchman index 5514edc..264b9da 100755 --- a/t/t7519/fsmonitor-watchman +++ b/t/t7519/fsmonitor-watchman @@ -23,10 +23,10 @@ my ($version, $time) = @ARGV; if ($version == 1) { # convert nanoseconds to seconds - $time = int $time / 1000000000; + # subtract one second to make sure watchman will return all changes + $time = int ($time / 1000000000) - 1; } else { - die "Unsupported query-fsmonitor hook version '$version'.\n" . - "Falling back to scanning...\n"; + exit 1; } my $git_work_tree; @@ -54,18 +54,12 @@ sub launch_watchman { # # To accomplish this, we're using the "since" generator to use the # recency index to select candidate nodes and "fields" to limit the - # output to file names only. Then we're using the "expression" term to - # further constrain the results. - # - # The category of transient files that we want to ignore will have a - # creation clock (cclock) newer than $time_t value and will also not - # currently exist. + # output to file names only. my $query = <<" END"; ["query", "$git_work_tree", { "since": $time, - "fields": ["name"], - "expression": ["not", ["allof", ["since", $time, "cclock"], ["not", "exists"]]] + "fields": ["name"] }] END diff --git a/t/t7519/fsmonitor-watchman-v2 b/t/t7519/fsmonitor-watchman-v2 new file mode 100755 index 0000000..14ed0aa --- /dev/null +++ b/t/t7519/fsmonitor-watchman-v2 @@ -0,0 +1,173 @@ +#!/usr/bin/perl + +use strict; +use warnings; +use IPC::Open2; + +# An example hook script to integrate Watchman +# (https://facebook.github.io/watchman/) with git to speed up detecting +# new and modified files. +# +# The hook is passed a version (currently 2) and last update token +# formatted as a string and outputs to stdout a new update token and +# all files that have been modified since the update token. Paths must +# be relative to the root of the working tree and separated by a single NUL. +# +# To enable this hook, rename this file to "query-watchman" and set +# 'git config core.fsmonitor .git/hooks/query-watchman' +# +my ($version, $last_update_token) = @ARGV; + +# Uncomment for debugging +# print STDERR "$0 $version $last_update_token\n"; + +# Check the hook interface version +if ($version ne 2) { + die "Unsupported query-fsmonitor hook version '$version'.\n" . + "Falling back to scanning...\n"; +} + +my $git_work_tree = get_working_dir(); + +my $retry = 1; + +my $json_pkg; +eval { + require JSON::XS; + $json_pkg = "JSON::XS"; + 1; +} or do { + require JSON::PP; + $json_pkg = "JSON::PP"; +}; + +launch_watchman(); + +sub launch_watchman { + my $o = watchman_query(); + if (is_work_tree_watched($o)) { + output_result($o->{clock}, @{$o->{files}}); + } +} + +sub output_result { + my ($clockid, @files) = @_; + + # Uncomment for debugging watchman output + # open (my $fh, ">", ".git/watchman-output.out"); + # binmode $fh, ":utf8"; + # print $fh "$clockid\n@files\n"; + # close $fh; + + binmode STDOUT, ":utf8"; + print $clockid; + print "\0"; + local $, = "\0"; + print @files; +} + +sub watchman_clock { + my $response = qx/watchman clock "$git_work_tree"/; + die "Failed to get clock id on '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + + return $json_pkg->new->utf8->decode($response); +} + +sub watchman_query { + my $pid = open2(\*CHLD_OUT, \*CHLD_IN, 'watchman -j --no-pretty') + or die "open2() failed: $!\n" . + "Falling back to scanning...\n"; + + # In the query expression below we're asking for names of files that + # changed since $last_update_token but not from the .git folder. + # + # To accomplish this, we're using the "since" generator to use the + # recency index to select candidate nodes and "fields" to limit the + # output to file names only. Then we're using the "expression" term to + # further constrain the results. + if (substr($last_update_token, 0, 1) eq "c") { + $last_update_token = "\"$last_update_token\""; + } + my $query = <<" END"; + ["query", "$git_work_tree", { + "since": $last_update_token, + "fields": ["name"], + "expression": ["not", ["dirname", ".git"]] + }] + END + + # Uncomment for debugging the watchman query + # open (my $fh, ">", ".git/watchman-query.json"); + # print $fh $query; + # close $fh; + + print CHLD_IN $query; + close CHLD_IN; + my $response = do {local $/; <CHLD_OUT>}; + + # Uncomment for debugging the watch response + # open ($fh, ">", ".git/watchman-response.json"); + # print $fh $response; + # close $fh; + + die "Watchman: command returned no output.\n" . + "Falling back to scanning...\n" if $response eq ""; + die "Watchman: command returned invalid output: $response\n" . + "Falling back to scanning...\n" unless $response =~ /^\{/; + + return $json_pkg->new->utf8->decode($response); +} + +sub is_work_tree_watched { + my ($output) = @_; + my $error = $output->{error}; + if ($retry > 0 and $error and $error =~ m/unable to resolve root .* directory (.*) is not watched/) { + $retry--; + my $response = qx/watchman watch "$git_work_tree"/; + die "Failed to make watchman watch '$git_work_tree'.\n" . + "Falling back to scanning...\n" if $? != 0; + $output = $json_pkg->new->utf8->decode($response); + $error = $output->{error}; + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + # Uncomment for debugging watchman output + # open (my $fh, ">", ".git/watchman-output.out"); + # close $fh; + + # Watchman will always return all files on the first query so + # return the fast "everything is dirty" flag to git and do the + # Watchman query just to get it over with now so we won't pay + # the cost in git to look up each individual file. + my $o = watchman_clock(); + $error = $output->{error}; + + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + output_result($o->{clock}, ("/")); + $last_update_token = $o->{clock}; + + eval { launch_watchman() }; + return 0; + } + + die "Watchman: $error.\n" . + "Falling back to scanning...\n" if $error; + + return 1; +} + +sub get_working_dir { + my $working_dir; + if ($^O =~ 'msys' || $^O =~ 'cygwin') { + $working_dir = Win32::GetCwd(); + $working_dir =~ tr/\\/\//; + } else { + require Cwd; + $working_dir = Cwd::cwd(); + } + + return $working_dir; +} diff --git a/t/t7525-status-rename.sh b/t/t7525-status-rename.sh index ef8b1b3..a62736d 100755 --- a/t/t7525-status-rename.sh +++ b/t/t7525-status-rename.sh @@ -84,7 +84,7 @@ test_expect_success 'status score=100%' ' test_i18ngrep "deleted:" actual && test_i18ngrep "new file:" actual && - git status --find-rename=100% >actual && + git status --find-renames=100% >actual && test_i18ngrep "deleted:" actual && test_i18ngrep "new file:" actual ' @@ -93,11 +93,11 @@ test_expect_success 'status score=01%' ' git status -M=01% >actual && test_i18ngrep "renamed:" actual && - git status --find-rename=01% >actual && + git status --find-renames=01% >actual && test_i18ngrep "renamed:" actual ' -test_expect_success 'copies not overridden by find-rename' ' +test_expect_success 'copies not overridden by find-renames' ' cp renamed copy && git add copy && @@ -105,7 +105,7 @@ test_expect_success 'copies not overridden by find-rename' ' test_i18ngrep "copied:" actual && test_i18ngrep "renamed:" actual && - git -c status.renames=copies status --find-rename=01% >actual && + git -c status.renames=copies status --find-renames=01% >actual && test_i18ngrep "copied:" actual && test_i18ngrep "renamed:" actual ' diff --git a/t/t7526-commit-pathspec-file.sh b/t/t7526-commit-pathspec-file.sh new file mode 100755 index 0000000..5fbe47e --- /dev/null +++ b/t/t7526-commit-pathspec-file.sh @@ -0,0 +1,164 @@ +#!/bin/sh + +test_description='commit --pathspec-from-file' + +. ./test-lib.sh + +test_tick + +test_expect_success setup ' + test_commit file0 && + git tag checkpoint && + + echo A >fileA.t && + echo B >fileB.t && + echo C >fileC.t && + echo D >fileD.t && + git add fileA.t fileB.t fileC.t fileD.t +' + +restore_checkpoint () { + git reset --soft checkpoint +} + +verify_expect () { + git diff-tree --no-commit-id --name-status -r HEAD >actual && + test_cmp expect actual +} + +test_expect_success '--pathspec-from-file from stdin' ' + restore_checkpoint && + + echo fileA.t | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success '--pathspec-from-file from file' ' + restore_checkpoint && + + echo fileA.t >list && + git commit --pathspec-from-file=list -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect +' + +test_expect_success 'NUL delimiters' ' + restore_checkpoint && + + printf "fileA.t\0fileB.t\0" | git commit --pathspec-from-file=- --pathspec-file-nul -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'LF delimiters' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'no trailing delimiter' ' + restore_checkpoint && + + printf "fileA.t\nfileB.t" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'CRLF delimiters' ' + restore_checkpoint && + + printf "fileA.t\r\nfileB.t\r\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + A fileB.t + EOF + verify_expect +' + +test_expect_success 'quotes' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + git commit --pathspec-from-file=list -m "Commit" && + + cat >expect <<-\EOF && + A fileA.t + EOF + verify_expect expect +' + +test_expect_success 'quotes not compatible with --pathspec-file-nul' ' + restore_checkpoint && + + cat >list <<-\EOF && + "file\101.t" + EOF + + test_must_fail git commit --pathspec-from-file=list --pathspec-file-nul -m "Commit" +' + +test_expect_success 'only touches what was listed' ' + restore_checkpoint && + + printf "fileB.t\nfileC.t\n" | git commit --pathspec-from-file=- -m "Commit" && + + cat >expect <<-\EOF && + A fileB.t + A fileC.t + EOF + verify_expect +' + +test_expect_success 'error conditions' ' + restore_checkpoint && + echo fileA.t >list && + >empty_list && + + test_must_fail git commit --pathspec-from-file=list --interactive -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git commit --pathspec-from-file=list --patch -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with --interactive/--patch" err && + + test_must_fail git commit --pathspec-from-file=list --all -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-from-file with -a does not make sense" err && + + test_must_fail git commit --pathspec-from-file=list -m "Commit" -- fileA.t 2>err && + test_i18ngrep -e "--pathspec-from-file is incompatible with pathspec arguments" err && + + test_must_fail git commit --pathspec-file-nul -m "Commit" 2>err && + test_i18ngrep -e "--pathspec-file-nul requires --pathspec-from-file" err && + + test_must_fail git commit --pathspec-from-file=empty_list --include -m "Commit" 2>err && + test_i18ngrep -e "No paths with --include/--only does not make sense." err && + + test_must_fail git commit --pathspec-from-file=empty_list --only -m "Commit" 2>err && + test_i18ngrep -e "No paths with --include/--only does not make sense." err +' + +test_done diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh index 1061482..1326088 100755 --- a/t/t7600-merge.sh +++ b/t/t7600-merge.sh @@ -233,20 +233,65 @@ test_expect_success 'merge --squash c3 with c7' ' cat result.9z >file && git commit --no-edit -a && - { - cat <<-EOF - Squashed commit of the following: + cat >expect <<-EOF && + Squashed commit of the following: - $(git show -s c7) + $(git show -s c7) - # Conflicts: - # file - EOF - } >expect && - git cat-file commit HEAD | sed -e '1,/^$/d' >actual && + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && test_cmp expect actual ' +test_expect_success 'merge c3 with c7 with commit.cleanup = scissors' ' + git config commit.cleanup scissors && + git reset --hard c3 && + test_must_fail git merge c7 && + cat result.9z >file && + git commit --no-edit -a && + + cat >expect <<-\EOF && + Merge tag '"'"'c7'"'"' + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && + test_i18ncmp expect actual +' + +test_expect_success 'merge c3 with c7 with --squash commit.cleanup = scissors' ' + git config commit.cleanup scissors && + git reset --hard c3 && + test_must_fail git merge --squash c7 && + cat result.9z >file && + git commit --no-edit -a && + + cat >expect <<-EOF && + Squashed commit of the following: + + $(git show -s c7) + + # ------------------------ >8 ------------------------ + # Do not modify or remove the line above. + # Everything below it will be ignored. + # + # Conflicts: + # file + EOF + git cat-file commit HEAD >raw && + sed -e '1,/^$/d' raw >actual && + test_i18ncmp expect actual +' + test_debug 'git log --graph --decorate --oneline --all' test_expect_success 'merge c1 with c2 and c3' ' @@ -525,6 +570,12 @@ test_expect_success 'combining --squash and --no-ff is refused' ' test_must_fail git merge --no-ff --squash c1 ' +test_expect_success 'combining --squash and --commit is refused' ' + git reset --hard c0 && + test_must_fail git merge --squash --commit c1 && + test_must_fail git merge --commit --squash c1 +' + test_expect_success 'option --ff-only overwrites --no-ff' ' git merge --no-ff --ff-only c1 && test_must_fail git merge --no-ff --ff-only c2 @@ -680,10 +731,10 @@ cat >editor <<\EOF ( echo "Merge work done on the side branch c1" echo - cat <"$1" + cat "$1" ) >"$1.tmp" && mv "$1.tmp" "$1" # strip comments and blank lines from end of message -sed -e '/^#/d' < "$1" | sed -e :a -e '/^\n*$/{$d;N;ba' -e '}' > expected +sed -e '/^#/d' "$1" | sed -e :a -e '/^\n*$/{$d;N;ba' -e '}' >expected EOF chmod 755 editor @@ -768,14 +819,14 @@ test_expect_success 'set up mod-256 conflict scenario' ' git commit -m base && # one side changes the first line of each to "master" - sed s/-1/-master/ <file >tmp && + sed s/-1/-master/ file >tmp && mv tmp file && git commit -am master && # and the other to "side"; merging the two will # yield 256 separate conflicts git checkout -b side HEAD^ && - sed s/-1/-side/ <file >tmp && + sed s/-1/-side/ file >tmp && mv tmp file && git commit -am side ' @@ -814,7 +865,7 @@ EOF test_expect_success EXECKEEPSPID 'killed merge can be completed with --continue' ' git reset --hard c0 && ! "$SHELL_PATH" -c '\'' - echo kill -TERM $$ >> .git/FAKE_EDITOR + echo kill -TERM $$ >>.git/FAKE_EDITOR GIT_EDITOR=.git/FAKE_EDITOR export GIT_EDITOR exec git merge --no-ff --edit c1'\'' && @@ -822,4 +873,50 @@ test_expect_success EXECKEEPSPID 'killed merge can be completed with --continue' verify_parents $c0 $c1 ' +test_expect_success 'merge --quit' ' + git init merge-quit && + ( + cd merge-quit && + test_commit base && + echo one >>base.t && + git commit -am one && + git branch one && + git checkout base && + echo two >>base.t && + git commit -am two && + test_must_fail git -c rerere.enabled=true merge one && + test_path_is_file .git/MERGE_HEAD && + test_path_is_file .git/MERGE_MODE && + test_path_is_file .git/MERGE_MSG && + git rerere status >rerere.before && + git merge --quit && + test_path_is_missing .git/MERGE_HEAD && + test_path_is_missing .git/MERGE_MODE && + test_path_is_missing .git/MERGE_MSG && + git rerere status >rerere.after && + test_must_be_empty rerere.after && + ! test_cmp rerere.after rerere.before + ) +' + +test_expect_success 'merge suggests matching remote refname' ' + git commit --allow-empty -m not-local && + git update-ref refs/remotes/origin/not-local HEAD && + git reset --hard HEAD^ && + + # This is white-box testing hackery; we happen to know + # that reading packed refs is more picky about the memory + # ownership of strings we pass to for_each_ref() callbacks. + git pack-refs --all --prune && + + test_must_fail git merge not-local 2>stderr && + grep origin/not-local stderr +' + +test_expect_success 'suggested names are not ambiguous' ' + git update-ref refs/heads/origin/not-local HEAD && + test_must_fail git merge not-local 2>stderr && + grep remotes/origin/not-local stderr +' + test_done diff --git a/t/t7604-merge-custom-message.sh b/t/t7604-merge-custom-message.sh index 89619cf..cd4f960 100755 --- a/t/t7604-merge-custom-message.sh +++ b/t/t7604-merge-custom-message.sh @@ -16,16 +16,16 @@ create_merge_msgs() { } test_expect_success 'setup' ' - echo c0 > c0.c && + echo c0 >c0.c && git add c0.c && git commit -m c0 && git tag c0 && - echo c1 > c1.c && + echo c1 >c1.c && git add c1.c && git commit -m c1 && git tag c1 && git reset --hard c0 && - echo c2 > c2.c && + echo c2 >c2.c && git add c2.c && git commit -m c2 && git tag c2 && @@ -36,15 +36,80 @@ test_expect_success 'setup' ' test_expect_success 'merge c2 with a custom message' ' git reset --hard c1 && git merge -m "$(cat exp.subject)" c2 && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_cmp exp.subject actual ' test_expect_success 'merge --log appends to custom message' ' git reset --hard c1 && git merge --log -m "$(cat exp.subject)" c2 && - git cat-file commit HEAD | sed -e "1,/^$/d" >actual && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && test_cmp exp.log actual ' +mesg_with_comment_and_newlines=' +# text + +' + +test_expect_success 'prepare file with comment line and trailing newlines' ' + printf "%s" "$mesg_with_comment_and_newlines" >expect +' + +test_expect_success 'cleanup commit messages (verbatim option)' ' + git reset --hard c1 && + git merge --cleanup=verbatim -F expect c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup commit messages (whitespace option)' ' + git reset --hard c1 && + test_write_lines "" "# text" "" >text && + echo "# text" >expect && + git merge --cleanup=whitespace -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup merge messages (scissors option)' ' + git reset --hard c1 && + cat >text <<-\EOF && + + # to be kept + + # ------------------------ >8 ------------------------ + # to be kept, too + # ------------------------ >8 ------------------------ + to be removed + # ------------------------ >8 ------------------------ + to be removed, too + EOF + + cat >expect <<-\EOF && + # to be kept + + # ------------------------ >8 ------------------------ + # to be kept, too + EOF + git merge --cleanup=scissors -e -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + +test_expect_success 'cleanup commit messages (strip option)' ' + git reset --hard c1 && + test_write_lines "" "# text" "sample" "" >text && + echo sample >expect && + git merge --cleanup=strip -F text c2 && + git cat-file commit HEAD >raw && + sed -e "1,/^$/d" raw >actual && + test_cmp expect actual +' + test_done diff --git a/t/t7610-mergetool.sh b/t/t7610-mergetool.sh index a9fb971..ad288dd 100755 --- a/t/t7610-mergetool.sh +++ b/t/t7610-mergetool.sh @@ -130,18 +130,71 @@ test_expect_success 'custom mergetool' ' test_when_finished "git reset --hard" && git checkout -b test$test_count branch1 && git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool file1 file1 ) && - ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && - test "$(cat file1)" = "master updated" && - test "$(cat file2)" = "master new" && - test "$(cat subdir/file3)" = "master new sub" && - test "$(cat submod/bar)" = "branch1 submodule" && + test_must_fail git merge master && + yes "" | git mergetool both && + yes "" | git mergetool file1 file1 && + yes "" | git mergetool file2 "spaced name" && + yes "" | git mergetool subdir/file3 && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "l" | git mergetool submod && + echo "master updated" >expect && + test_cmp expect file1 && + echo "master new" >expect && + test_cmp expect file2 && + echo "master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && + git commit -m "branch1 resolved with mergetool" +' + +test_expect_success 'gui mergetool' ' + test_config merge.guitool myguitool && + test_config mergetool.myguitool.cmd "(printf \"gui \" && cat \"\$REMOTE\") >\"\$MERGED\"" && + test_config mergetool.myguitool.trustExitCode true && + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + git submodule update -N && + test_must_fail git merge master && + yes "" | git mergetool --gui both && + yes "" | git mergetool -g file1 file1 && + yes "" | git mergetool --gui file2 "spaced name" && + yes "" | git mergetool --gui subdir/file3 && + yes "d" | git mergetool --gui file11 && + yes "d" | git mergetool --gui file12 && + yes "l" | git mergetool --gui submod && + echo "gui master updated" >expect && + test_cmp expect file1 && + echo "gui master new" >expect && + test_cmp expect file2 && + echo "gui master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && + git commit -m "branch1 resolved with mergetool" +' + +test_expect_success 'gui mergetool without merge.guitool set falls back to merge.tool' ' + test_when_finished "git reset --hard" && + git checkout -b test$test_count branch1 && + git submodule update -N && + test_must_fail git merge master && + yes "" | git mergetool --gui both && + yes "" | git mergetool -g file1 file1 && + yes "" | git mergetool --gui file2 "spaced name" && + yes "" | git mergetool --gui subdir/file3 && + yes "d" | git mergetool --gui file11 && + yes "d" | git mergetool --gui file12 && + yes "l" | git mergetool --gui submod && + echo "master updated" >expect && + test_cmp expect file1 && + echo "master new" >expect && + test_cmp expect file2 && + echo "master new sub" >expect && + test_cmp expect subdir/file3 && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git commit -m "branch1 resolved with mergetool" ' @@ -153,20 +206,21 @@ test_expect_success 'mergetool crlf' ' # test_when_finished is LIFO.) test_config core.autocrlf true && git checkout -b test$test_count branch1 && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool file2 >/dev/null 2>&1 ) && - ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod >/dev/null 2>&1 ) && + test_must_fail git merge master && + yes "" | git mergetool file1 && + yes "" | git mergetool file2 && + yes "" | git mergetool "spaced name" && + yes "" | git mergetool both && + yes "" | git mergetool subdir/file3 && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "r" | git mergetool submod && test "$(printf x | cat file1 -)" = "$(printf "master updated\r\nx")" && test "$(printf x | cat file2 -)" = "$(printf "master new\r\nx")" && test "$(printf x | cat subdir/file3 -)" = "$(printf "master new sub\r\nx")" && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git commit -m "branch1 resolved with mergetool - autocrlf" ' @@ -176,9 +230,10 @@ test_expect_success 'mergetool in subdir' ' git submodule update -N && ( cd subdir && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && - test "$(cat file3)" = "master new sub" + test_must_fail git merge master && + yes "" | git mergetool file3 && + echo "master new sub" >expect && + test_cmp expect file3 ) ' @@ -188,17 +243,20 @@ test_expect_success 'mergetool on file in parent dir' ' git submodule update -N && ( cd subdir && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "" | git mergetool file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) && - ( yes "" | git mergetool ../both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat ../submod/bar)" = "branch1 submodule" && + test_must_fail git merge master && + yes "" | git mergetool file3 && + yes "" | git mergetool ../file1 && + yes "" | git mergetool ../file2 ../spaced\ name && + yes "" | git mergetool ../both && + yes "d" | git mergetool ../file11 && + yes "d" | git mergetool ../file12 && + yes "l" | git mergetool ../submod && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "branch1 submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch1 resolved with mergetool - subdir" ) ' @@ -209,9 +267,9 @@ test_expect_success 'mergetool skips autoresolved' ' git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "d" | git mergetool file11 >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod >/dev/null 2>&1 ) && + yes "d" | git mergetool file11 && + yes "d" | git mergetool file12 && + yes "l" | git mergetool submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" ' @@ -223,13 +281,17 @@ test_expect_success 'mergetool merges all from subdir (rerere disabled)' ' ( cd subdir && test_must_fail git merge master && - ( yes "r" | git mergetool ../submod ) && - ( yes "d" "d" | git mergetool --no-prompt ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat file3)" = "master new sub" && + yes "r" | git mergetool ../submod && + yes "d" "d" | git mergetool --no-prompt && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "master new sub" >expect && + test_cmp expect file3 && ( cd .. && git submodule update -N ) && - test "$(cat ../submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch2 resolved by mergetool from subdir" ) ' @@ -242,13 +304,17 @@ test_expect_success 'mergetool merges all from subdir (rerere enabled)' ' ( cd subdir && test_must_fail git merge master && - ( yes "r" | git mergetool ../submod ) && - ( yes "d" "d" | git mergetool --no-prompt ) && - test "$(cat ../file1)" = "master updated" && - test "$(cat ../file2)" = "master new" && - test "$(cat file3)" = "master new sub" && + yes "r" | git mergetool ../submod && + yes "d" "d" | git mergetool --no-prompt && + echo "master updated" >expect && + test_cmp expect ../file1 && + echo "master new" >expect && + test_cmp expect ../file2 && + echo "master new sub" >expect && + test_cmp expect file3 && ( cd .. && git submodule update -N ) && - test "$(cat ../submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect ../submod/bar && git commit -m "branch2 resolved by mergetool from subdir" ) ' @@ -259,9 +325,9 @@ test_expect_success 'mergetool skips resolved paths when rerere is active' ' rm -rf .git/rr-cache && git checkout -b test$test_count branch1 && git submodule update -N && - test_must_fail git merge master >/dev/null 2>&1 && - ( yes "l" | git mergetool --no-prompt submod >/dev/null 2>&1 ) && - ( yes "d" "d" | git mergetool --no-prompt >/dev/null 2>&1 ) && + test_must_fail git merge master && + yes "l" | git mergetool --no-prompt submod && + yes "d" "d" | git mergetool --no-prompt && git submodule update -N && output="$(yes "n" | git mergetool --no-prompt)" && test "$output" = "No files need merging" @@ -302,9 +368,10 @@ test_expect_success 'mergetool takes partial path' ' git submodule update -N && test_must_fail git merge master && - ( yes "" | git mergetool subdir ) && + yes "" | git mergetool subdir && - test "$(cat subdir/file3)" = "master new sub" + echo "master new sub" >expect && + test_cmp expect subdir/file3 ' test_expect_success 'mergetool delete/delete conflict' ' @@ -369,14 +436,16 @@ test_expect_success 'deleted vs modified submodule' ' git checkout -b test$test_count.a test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" && @@ -386,10 +455,10 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && test ! -e submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && @@ -400,10 +469,10 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && test ! -e submod && test -d submod.orig && git submodule update -N && @@ -416,13 +485,15 @@ test_expect_success 'deleted vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && + echo "master submodule" >expect && + test_cmp expect submod/bar && + git submodule update -N && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" @@ -440,14 +511,16 @@ test_expect_success 'file vs modified submodule' ' git checkout -b test$test_count.a branch1 && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && rmdir submod && mv submod-movedaside submod && - test "$(cat submod/bar)" = "branch1 submodule" && + echo "branch1 submodule" >expect && + test_cmp expect submod/bar && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" && @@ -456,12 +529,13 @@ test_expect_success 'file vs modified submodule' ' git checkout -b test$test_count.b test$test_count && test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && git submodule update -N && - test "$(cat submod)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && @@ -472,13 +546,14 @@ test_expect_success 'file vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both >/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "r" | git mergetool submod ) && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "r" | git mergetool submod && test -d submod.orig && git submodule update -N && - test "$(cat submod)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping file" && @@ -488,13 +563,15 @@ test_expect_success 'file vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) && - ( yes "" | git mergetool both>/dev/null 2>&1 ) && - ( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/bar)" = "master submodule" && - git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + yes "" | git mergetool file1 file2 spaced\ name subdir/file3 && + yes "" | git mergetool both && + yes "d" | git mergetool file11 file12 && + yes "l" | git mergetool submod && + echo "master submodule" >expect && + test_cmp expect submod/bar && + git submodule update -N && + echo "master submodule" >expect && + test_cmp expect submod/bar && output="$(git mergetool --no-prompt)" && test "$output" = "No files need merging" && git commit -m "Merge resolved by keeping module" @@ -543,22 +620,26 @@ test_expect_success 'submodule in subdirectory' ' git add subdir/subdir_module && git commit -m "change submodule in subdirectory on test$test_count.b" && - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && + test_must_fail git merge test$test_count.a && ( cd subdir && - ( yes "l" | git mergetool subdir_module ) + yes "l" | git mergetool subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git reset --hard && git submodule update -N && - test_must_fail git merge test$test_count.a >/dev/null 2>&1 && - ( yes "r" | git mergetool subdir/subdir_module ) && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.b" && + test_must_fail git merge test$test_count.a && + yes "r" | git mergetool subdir/subdir_module && + echo "test$test_count.b" >expect && + test_cmp expect subdir/subdir_module/file15 && git submodule update -N && - test "$(cat subdir/subdir_module/file15)" = "test$test_count.a" && + echo "test$test_count.a" >expect && + test_cmp expect subdir/subdir_module/file15 && git commit -m "branch1 resolved with mergetool" ' @@ -574,22 +655,25 @@ test_expect_success 'directory vs modified submodule' ' test_must_fail git merge master && test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && + yes "l" | git mergetool submod && + echo "not a submodule" >expect && + test_cmp expect submod/file16 && rm -rf submod.orig && git reset --hard && test_must_fail git merge master && test -n "$(git ls-files -u)" && test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && + yes "r" | git mergetool submod && test -d submod.orig && - test "$(cat submod.orig/file16)" = "not a submodule" && + echo "not a submodule" >expect && + test_cmp expect submod.orig/file16 && rm -r submod.orig && mv submod-movedaside/.git submod && ( cd submod && git clean -f && git reset --hard ) && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git reset --hard && rm -rf submod-movedaside && @@ -597,17 +681,19 @@ test_expect_success 'directory vs modified submodule' ' git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && - ( yes "l" | git mergetool submod ) && + yes "l" | git mergetool submod && git submodule update -N && - test "$(cat submod/bar)" = "master submodule" && + echo "master submodule" >expect && + test_cmp expect submod/bar && git reset --hard && git submodule update -N && test_must_fail git merge test$test_count && test -n "$(git ls-files -u)" && test ! -e submod.orig && - ( yes "r" | git mergetool submod ) && - test "$(cat submod/file16)" = "not a submodule" && + yes "r" | git mergetool submod && + echo "not a submodule" >expect && + test_cmp expect submod/file16 && git reset --hard master && ( cd submod && git clean -f && git reset --hard ) && @@ -641,7 +727,7 @@ test_expect_success 'filenames seen by tools start with ./' ' test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - grep ^\./both_LOCAL_ actual >/dev/null + grep ^\./both_LOCAL_ actual ' test_lazy_prereq MKTEMP ' @@ -658,8 +744,8 @@ test_expect_success MKTEMP 'temporary filenames are used with mergetool.writeToT test_config mergetool.myecho.trustExitCode true && test_must_fail git merge master && git mergetool --no-prompt --tool myecho -- both >actual && - ! grep ^\./both_LOCAL_ actual >/dev/null && - grep /both_LOCAL_ actual >/dev/null + ! grep ^\./both_LOCAL_ actual && + grep /both_LOCAL_ actual ' test_expect_success 'diff.orderFile configuration is honored' ' diff --git a/t/t7612-merge-verify-signatures.sh b/t/t7612-merge-verify-signatures.sh index d99218a..a426f3a 100755 --- a/t/t7612-merge-verify-signatures.sh +++ b/t/t7612-merge-verify-signatures.sh @@ -66,6 +66,20 @@ test_expect_success GPG 'merge commit with untrusted signature with verification test_i18ngrep "has an untrusted GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with untrusted signature with verification and high minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel marginal && + test_must_fail git merge --ff-only --verify-signatures side-untrusted 2>mergeerror && + test_i18ngrep "has an untrusted GPG signature" mergeerror +' + +test_expect_success GPG 'merge commit with untrusted signature with verification and low minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config gpg.minTrustLevel undefined && + git merge --ff-only --verify-signatures side-untrusted >mergeoutput && + test_i18ngrep "has a good GPG signature" mergeoutput +' + test_expect_success GPG 'merge commit with untrusted signature with merge.verifySignatures=true' ' test_when_finished "git reset --hard && git checkout initial" && test_config merge.verifySignatures true && @@ -73,6 +87,14 @@ test_expect_success GPG 'merge commit with untrusted signature with merge.verify test_i18ngrep "has an untrusted GPG signature" mergeerror ' +test_expect_success GPG 'merge commit with untrusted signature with merge.verifySignatures=true and minTrustLevel' ' + test_when_finished "git reset --hard && git checkout initial" && + test_config merge.verifySignatures true && + test_config gpg.minTrustLevel marginal && + test_must_fail git merge --ff-only side-untrusted 2>mergeerror && + test_i18ngrep "has an untrusted GPG signature" mergeerror +' + test_expect_success GPG 'merge signed commit with verification' ' test_when_finished "git reset --hard && git checkout initial" && git merge --verbose --ff-only --verify-signatures side-signed >mergeoutput && diff --git a/t/t7700-repack.sh b/t/t7700-repack.sh index 6162e2a..25b235c 100755 --- a/t/t7700-repack.sh +++ b/t/t7700-repack.sh @@ -4,129 +4,104 @@ test_description='git repack works correctly' . ./test-lib.sh -commit_and_pack() { - test_commit "$@" >/dev/null && - SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && - echo pack-${SHA1}.pack +commit_and_pack () { + test_commit "$@" 1>&2 && + incrpackid=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) && + echo pack-${incrpackid}.pack +} + +test_no_missing_in_packs () { + myidx=$(ls -1 .git/objects/pack/*.idx) && + test_path_is_file "$myidx" && + git verify-pack -v alt_objects/pack/*.idx >orig.raw && + sed -n -e "s/^\($OID_REGEX\).*/\1/p" orig.raw | sort >orig && + git verify-pack -v $myidx >dest.raw && + cut -d" " -f1 dest.raw | sort >dest && + comm -23 orig dest >missing && + test_must_be_empty missing +} + +# we expect $packid and $oid to be defined +test_has_duplicate_object () { + want_duplicate_object="$1" + found_duplicate_object=false + for p in .git/objects/pack/*.idx + do + idx=$(basename $p) + test "pack-$packid.idx" = "$idx" && continue + git verify-pack -v $p >packlist || return $? + if grep "^$oid" packlist + then + found_duplicate_object=true + echo "DUPLICATE OBJECT FOUND" + break + fi + done && + test "$want_duplicate_object" = "$found_duplicate_object" } test_expect_success 'objects in packs marked .keep are not repacked' ' - echo content1 > file1 && - echo content2 > file2 && + echo content1 >file1 && + echo content2 >file2 && git add . && test_tick && git commit -m initial_commit && # Create two packs # The first pack will contain all of the objects except one - git rev-list --objects --all | grep -v file2 | - git pack-objects pack > /dev/null && + git rev-list --objects --all >objs && + grep -v file2 objs | git pack-objects pack && # The second pack will contain the excluded object - packsha1=$(git rev-list --objects --all | grep file2 | - git pack-objects pack) && - >pack-$packsha1.keep && - objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 | - sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") && + packid=$(grep file2 objs | git pack-objects pack) && + >pack-$packid.keep && + git verify-pack -v pack-$packid.idx >packlist && + oid=$(head -n 1 packlist | sed -e "s/^\($OID_REGEX\).*/\1/") && mv pack-* .git/objects/pack/ && git repack -A -d -l && git prune-packed && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test -z "$found_duplicate_object" + test_has_duplicate_object false ' test_expect_success 'writing bitmaps via command-line can duplicate .keep objects' ' - # build on $objsha1, $packsha1, and .keep state from previous + # build on $oid, $packid, and .keep state from previous git repack -Adbl && - test_when_finished "found_duplicate_object=" && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test "$found_duplicate_object" = 1 + test_has_duplicate_object true ' test_expect_success 'writing bitmaps via config can duplicate .keep objects' ' - # build on $objsha1, $packsha1, and .keep state from previous + # build on $oid, $packid, and .keep state from previous git -c repack.writebitmaps=true repack -Adl && - test_when_finished "found_duplicate_object=" && - for p in .git/objects/pack/*.idx; do - idx=$(basename $p) - test "pack-$packsha1.idx" = "$idx" && continue - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test "$found_duplicate_object" = 1 + test_has_duplicate_object true ' test_expect_success 'loose objects in alternate ODB are not repacked' ' mkdir alt_objects && - echo $(pwd)/alt_objects > .git/objects/info/alternates && - echo content3 > file3 && - objsha1=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) && + echo $(pwd)/alt_objects >.git/objects/info/alternates && + echo content3 >file3 && + oid=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) && git add file3 && test_tick && git commit -m commit_file3 && git repack -a -d -l && git prune-packed && - for p in .git/objects/pack/*.idx; do - if git verify-pack -v $p | egrep "^$objsha1"; then - found_duplicate_object=1 - echo "DUPLICATE OBJECT FOUND" - break - fi - done && - test -z "$found_duplicate_object" + test_has_duplicate_object false ' test_expect_success 'packed obs in alt ODB are repacked even when local repo is packless' ' mkdir alt_objects/pack && mv .git/objects/pack/* alt_objects/pack && git repack -a && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed obs in alt ODB are repacked when local repo has packs' ' rm -f .git/objects/pack/* && - echo new_content >> file1 && + echo new_content >>file1 && git add file1 && test_tick && git commit -m more_content && git repack && git repack -a -d && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' @@ -134,7 +109,7 @@ test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' for p in alt_objects/pack/*.pack do base_name=$(basename $p .pack) && - if test -f alt_objects/pack/$base_name.keep + if test_path_is_file alt_objects/pack/$base_name.keep then rm alt_objects/pack/$base_name.keep else @@ -142,22 +117,13 @@ test_expect_success 'packed obs in alternate ODB kept pack are repacked' ' fi done && git repack -a -d && - myidx=$(ls -1 .git/objects/pack/*.idx) && - test -f "$myidx" && - for p in alt_objects/pack/*.idx; do - git verify-pack -v $p | sed -n -e "/^[0-9a-f]\{40\}/p" - done | while read sha1 rest; do - if ! ( git verify-pack -v $myidx | grep "^$sha1" ); then - echo "Missing object in local pack: $sha1" - return 1 - fi - done + test_no_missing_in_packs ' test_expect_success 'packed unreachable obs in alternate ODB are not loosened' ' rm -f alt_objects/pack/*.keep && mv .git/objects/pack/* alt_objects/pack/ && - csha1=$(git rev-parse HEAD^{commit}) && + coid=$(git rev-parse HEAD^{commit}) && git reset --hard HEAD^ && test_tick && git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && @@ -167,15 +133,15 @@ test_expect_success 'packed unreachable obs in alternate ODB are not loosened' ' --unpack-unreachable </dev/null pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && - test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx | - egrep "^$csha1 " | sort | uniq | wc -l) && - echo > .git/objects/info/alternates && - test_must_fail git show $csha1 + git verify-pack -v -- .git/objects/pack/*.idx >packlist && + ! grep "^$coid " packlist && + echo >.git/objects/info/alternates && + test_must_fail git show $coid ' test_expect_success 'local packed unreachable obs that exist in alternate ODB are not loosened' ' - echo $(pwd)/alt_objects > .git/objects/info/alternates && - echo "$csha1" | git pack-objects --non-empty --all --reflog pack && + echo $(pwd)/alt_objects >.git/objects/info/alternates && + echo "$coid" | git pack-objects --non-empty --all --reflog pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && # The pack-objects call on the next line is equivalent to @@ -184,10 +150,10 @@ test_expect_success 'local packed unreachable obs that exist in alternate ODB ar --unpack-unreachable </dev/null pack && rm -f .git/objects/pack/* && mv pack-* .git/objects/pack/ && - test 0 = $(git verify-pack -v -- .git/objects/pack/*.idx | - egrep "^$csha1 " | sort | uniq | wc -l) && - echo > .git/objects/info/alternates && - test_must_fail git show $csha1 + git verify-pack -v -- .git/objects/pack/*.idx >packlist && + ! grep "^$coid " && + echo >.git/objects/info/alternates && + test_must_fail git show $coid ' test_expect_success 'objects made unreachable by grafts only are kept' ' @@ -196,7 +162,7 @@ test_expect_success 'objects made unreachable by grafts only are kept' ' H0=$(git rev-parse HEAD) && H1=$(git rev-parse HEAD^) && H2=$(git rev-parse HEAD^^) && - echo "$H0 $H2" > .git/info/grafts && + echo "$H0 $H2" >.git/info/grafts && git reflog expire --expire=$test_tick --expire-unreachable=$test_tick --all && git repack -a -d && git cat-file -t $H1 @@ -221,5 +187,45 @@ test_expect_success 'repack --keep-pack' ' ) ' -test_done +test_expect_success 'bitmaps are created by default in bare repos' ' + git clone --bare .git bare.git && + git -C bare.git repack -ad && + bitmap=$(ls bare.git/objects/pack/*.bitmap) && + test_path_is_file "$bitmap" +' + +test_expect_success 'incremental repack does not complain' ' + git -C bare.git repack -q 2>repack.err && + test_must_be_empty repack.err +' + +test_expect_success 'bitmaps can be disabled on bare repos' ' + git -c repack.writeBitmaps=false -C bare.git repack -ad && + bitmap=$(ls bare.git/objects/pack/*.bitmap || :) && + test -z "$bitmap" +' + +test_expect_success 'no bitmaps created if .keep files present' ' + pack=$(ls bare.git/objects/pack/*.pack) && + test_path_is_file "$pack" && + keep=${pack%.pack}.keep && + test_when_finished "rm -f \"\$keep\"" && + >"$keep" && + git -C bare.git repack -ad 2>stderr && + test_must_be_empty stderr && + find bare.git/objects/pack/ -type f -name "*.bitmap" >actual && + test_must_be_empty actual +' +test_expect_success 'auto-bitmaps do not complain if unavailable' ' + test_config -C bare.git pack.packSizeLimit 1M && + blob=$(test-tool genrandom big $((1024*1024)) | + git -C bare.git hash-object -w --stdin) && + git -C bare.git update-ref refs/tags/big $blob && + git -C bare.git repack -ad 2>stderr && + test_must_be_empty stderr && + find bare.git/objects/pack -type f -name "*.bitmap" >actual && + test_must_be_empty actual +' + +test_done diff --git a/t/t7800-difftool.sh b/t/t7800-difftool.sh index 22b9199..29b9290 100755 --- a/t/t7800-difftool.sh +++ b/t/t7800-difftool.sh @@ -125,15 +125,14 @@ test_expect_success 'difftool stops on error with --trust-exit-code' ' test_when_finished "rm -f for-diff .git/fail-right-file" && test_when_finished "git reset -- for-diff" && write_script .git/fail-right-file <<-\EOF && - echo "$2" + echo failed exit 1 EOF >for-diff && git add for-diff && - echo file >expect && test_must_fail git difftool -y --trust-exit-code \ --extcmd .git/fail-right-file branch >actual && - test_cmp expect actual + test_line_count = 1 actual ' test_expect_success 'difftool honors exit status if command not found' ' @@ -279,11 +278,27 @@ test_expect_success 'difftool + mergetool config variables' ' echo branch >expect && git difftool --no-prompt branch >actual && test_cmp expect actual && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && # set merge.tool to something bogus, diff.tool to test-tool test_config merge.tool bogus-tool && test_config diff.tool test-tool && git difftool --no-prompt branch >actual && + test_cmp expect actual && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && + + # set merge.tool, diff.tool to something bogus, merge.guitool to test-tool + test_config diff.tool bogus-tool && + test_config merge.guitool test-tool && + git difftool --gui --no-prompt branch >actual && + test_cmp expect actual && + + # set merge.tool, diff.tool, merge.guitool to something bogus, diff.guitool to test-tool + test_config merge.guitool bogus-tool && + test_config diff.guitool test-tool && + git difftool --gui --no-prompt branch >actual && test_cmp expect actual ' @@ -546,7 +561,7 @@ do done >actual EOF -test_expect_success SYMLINKS 'difftool --dir-diff --symlink without unstaged changes' ' +test_expect_success SYMLINKS 'difftool --dir-diff --symlinks without unstaged changes' ' cat >expect <<-EOF && file $PWD/file @@ -555,7 +570,7 @@ test_expect_success SYMLINKS 'difftool --dir-diff --symlink without unstaged cha sub/sub $PWD/sub/sub EOF - git difftool --dir-diff --symlink \ + git difftool --dir-diff --symlinks \ --extcmd "./.git/CHECK_SYMLINKS" branch HEAD && test_cmp expect actual ' @@ -705,4 +720,22 @@ test_expect_success SYMLINKS 'difftool --dir-diff handles modified symlinks' ' test_cmp expect actual ' +test_expect_success 'outside worktree' ' + echo 1 >1 && + echo 2 >2 && + test_expect_code 1 nongit git \ + -c diff.tool=echo -c difftool.echo.cmd="echo \$LOCAL \$REMOTE" \ + difftool --no-prompt --no-index ../1 ../2 >actual && + echo "../1 ../2" >expect && + test_cmp expect actual +' + +test_expect_success 'difftool --gui, --tool and --extcmd are mutually exclusive' ' + difftool_test_setup && + test_must_fail git difftool --gui --tool=test-tool && + test_must_fail git difftool --gui --extcmd=cat && + test_must_fail git difftool --tool=test-tool --extcmd=cat && + test_must_fail git difftool --gui --tool=test-tool --extcmd=cat +' + test_done diff --git a/t/t7810-grep.sh b/t/t7810-grep.sh index 43aa416..7d7b396 100755 --- a/t/t7810-grep.sh +++ b/t/t7810-grep.sh @@ -119,33 +119,33 @@ do test_cmp expected actual ' - test_expect_success "grep -w $L (with --column, --invert)" ' + test_expect_success "grep -w $L (with --column, --invert-match)" ' { echo ${HC}file:1:foo mmap bar echo ${HC}file:1:foo_mmap bar echo ${HC}file:1:foo_mmap bar mmap echo ${HC}file:1:foo mmap bar_mmap } >expected && - git grep --column --invert -w -e baz $H -- file >actual && + git grep --column --invert-match -w -e baz $H -- file >actual && test_cmp expected actual ' - test_expect_success "grep $L (with --column, --invert, extended OR)" ' + test_expect_success "grep $L (with --column, --invert-match, extended OR)" ' { echo ${HC}hello_world:6:HeLLo_world } >expected && - git grep --column --invert -e ll --or --not -e _ $H -- hello_world \ + git grep --column --invert-match -e ll --or --not -e _ $H -- hello_world \ >actual && test_cmp expected actual ' - test_expect_success "grep $L (with --column, --invert, extended AND)" ' + test_expect_success "grep $L (with --column, --invert-match, extended AND)" ' { echo ${HC}hello_world:3:Hello world echo ${HC}hello_world:3:Hello_world echo ${HC}hello_world:6:HeLLo_world } >expected && - git grep --column --invert --not -e _ --and --not -e ll $H -- hello_world \ + git grep --column --invert-match --not -e _ --and --not -e ll $H -- hello_world \ >actual && test_cmp expected actual ' @@ -412,7 +412,7 @@ do test_cmp expected actual ' - test_expect_success !PCRE "grep $L with grep.patterntype=perl errors without PCRE" ' + test_expect_success !FAIL_PREREQS,!PCRE "grep $L with grep.patterntype=perl errors without PCRE" ' test_must_fail git -c grep.patterntype=perl grep "foo.*bar" ' @@ -1010,7 +1010,7 @@ test_expect_success 'outside of git repository' ' echo ".gitignore:.*o*" && cat ../expect.full } >../expect.with.ignored && - git grep --no-index --no-exclude o >../actual.full && + git grep --no-index --no-exclude-standard o >../actual.full && test_cmp ../expect.with.ignored ../actual.full ) ' @@ -1051,7 +1051,7 @@ test_expect_success 'outside of git repository with fallbackToNoIndex' ' echo ".gitignore:.*o*" && cat ../expect.full } >../expect.with.ignored && - git -c grep.fallbackToNoIndex grep --no-exclude o >../actual.full && + git -c grep.fallbackToNoIndex grep --no-exclude-standard o >../actual.full && test_cmp ../expect.with.ignored ../actual.full ) ' @@ -1234,7 +1234,7 @@ test_expect_success PCRE 'grep --perl-regexp pattern' ' test_cmp expected actual ' -test_expect_success !PCRE 'grep --perl-regexp pattern errors without PCRE' ' +test_expect_success !FAIL_PREREQS,!PCRE 'grep --perl-regexp pattern errors without PCRE' ' test_must_fail git grep --perl-regexp "foo.*bar" ' @@ -1249,7 +1249,7 @@ test_expect_success LIBPCRE2 "grep -P with (*NO_JIT) doesn't error out" ' ' -test_expect_success !PCRE 'grep -P pattern errors without PCRE' ' +test_expect_success !FAIL_PREREQS,!PCRE 'grep -P pattern errors without PCRE' ' test_must_fail git grep -P "foo.*bar" ' diff --git a/t/t7811-grep-open.sh b/t/t7811-grep-open.sh index d1ebfd8..a98785d 100755 --- a/t/t7811-grep-open.sh +++ b/t/t7811-grep-open.sh @@ -113,7 +113,6 @@ test_expect_success 'modified file' ' subdir/grep.c unrelated EOF - >empty && echo "enum grep_pat_token" >unrelated && test_when_finished "git checkout HEAD unrelated" && diff --git a/t/t7812-grep-icase-non-ascii.sh b/t/t7812-grep-icase-non-ascii.sh index 0c685d3..03dba66 100755 --- a/t/t7812-grep-icase-non-ascii.sh +++ b/t/t7812-grep-icase-non-ascii.sh @@ -53,4 +53,35 @@ test_expect_success REGEX_LOCALE 'pickaxe -i on non-ascii' ' test_cmp expected actual ' +test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: setup invalid UTF-8 data' ' + printf "\\200\\n" >invalid-0x80 && + echo "ævar" >expected && + cat expected >>invalid-0x80 && + git add invalid-0x80 +' + +test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep ASCII from invalid UTF-8 data' ' + git grep -h "var" invalid-0x80 >actual && + test_cmp expected actual && + git grep -h "(*NO_JIT)var" invalid-0x80 >actual && + test_cmp expected actual +' + +test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep non-ASCII from invalid UTF-8 data' ' + git grep -h "æ" invalid-0x80 >actual && + test_cmp expected actual && + git grep -h "(*NO_JIT)æ" invalid-0x80 >actual && + test_cmp expected actual +' + +test_expect_success GETTEXT_LOCALE,LIBPCRE2 'PCRE v2: grep non-ASCII from invalid UTF-8 data with -i' ' + test_might_fail git grep -hi "Æ" invalid-0x80 >actual && + if test -s actual + then + test_cmp expected actual + fi && + test_must_fail git grep -hi "(*NO_JIT)Æ" invalid-0x80 >actual && + ! test_cmp expected actual +' + test_done diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh index fa475d5..828cb3b 100755 --- a/t/t7814-grep-recurse-submodules.sh +++ b/t/t7814-grep-recurse-submodules.sh @@ -14,12 +14,14 @@ test_expect_success 'setup directory structure and submodule' ' echo "(3|4)" >b/b && git add a b && git commit -m "add a and b" && + test_tick && git init submodule && echo "(1|2)d(3|4)" >submodule/a && git -C submodule add a && git -C submodule commit -m "add a" && git submodule add ./submodule && - git commit -m "added submodule" + git commit -m "added submodule" && + test_tick ' test_expect_success 'grep correctly finds patterns in a submodule' ' @@ -65,11 +67,14 @@ test_expect_success 'grep and nested submodules' ' echo "(1|2)d(3|4)" >submodule/sub/a && git -C submodule/sub add a && git -C submodule/sub commit -m "add a" && + test_tick && git -C submodule submodule add ./sub && git -C submodule add sub && git -C submodule commit -m "added sub" && + test_tick && git add submodule && git commit -m "updated submodule" && + test_tick && cat >expect <<-\EOF && a:(1|2)d(3|4) @@ -179,15 +184,18 @@ test_expect_success !MINGW 'grep recurse submodule colon in name' ' echo "(1|2)d(3|4)" >"parent/fi:le" && git -C parent add "fi:le" && git -C parent commit -m "add fi:le" && + test_tick && git init "su:b" && test_when_finished "rm -rf su:b" && echo "(1|2)d(3|4)" >"su:b/fi:le" && git -C "su:b" add "fi:le" && git -C "su:b" commit -m "add fi:le" && + test_tick && git -C parent submodule add "../su:b" "su:b" && git -C parent commit -m "add submodule" && + test_tick && cat >expect <<-\EOF && fi:le:(1|2)d(3|4) @@ -210,15 +218,18 @@ test_expect_success 'grep history with moved submoules' ' echo "(1|2)d(3|4)" >parent/file && git -C parent add file && git -C parent commit -m "add file" && + test_tick && git init sub && test_when_finished "rm -rf sub" && echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git -C parent submodule add ../sub dir/sub && git -C parent commit -m "add submodule" && + test_tick && cat >expect <<-\EOF && dir/sub/file:(1|2)d(3|4) @@ -229,6 +240,7 @@ test_expect_success 'grep history with moved submoules' ' git -C parent mv dir/sub sub-moved && git -C parent commit -m "moved submodule" && + test_tick && cat >expect <<-\EOF && file:(1|2)d(3|4) @@ -251,6 +263,7 @@ test_expect_success 'grep using relative path' ' echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git init parent && echo "(1|2)d(3|4)" >parent/file && @@ -260,6 +273,7 @@ test_expect_success 'grep using relative path' ' git -C parent add src/file2 && git -C parent submodule add ../sub && git -C parent commit -m "add files and submodule" && + test_tick && # From top works cat >expect <<-\EOF && @@ -293,6 +307,7 @@ test_expect_success 'grep from a subdir' ' echo "(1|2)d(3|4)" >sub/file && git -C sub add file && git -C sub commit -m "add file" && + test_tick && git init parent && mkdir parent/src && @@ -301,6 +316,7 @@ test_expect_success 'grep from a subdir' ' git -C parent submodule add ../sub src/sub && git -C parent submodule add ../sub sub && git -C parent commit -m "add files and submodules" && + test_tick && # Verify grep from root works cat >expect <<-\EOF && @@ -329,7 +345,16 @@ test_incompatible_with_recurse_submodules () } test_incompatible_with_recurse_submodules --untracked -test_incompatible_with_recurse_submodules --no-index + +test_expect_success 'grep --recurse-submodules --no-index ignores --recurse-submodules' ' + git grep --recurse-submodules --no-index -e "^(.|.)[\d]" >actual && + cat >expect <<-\EOF && + a:(1|2)d(3|4) + submodule/a:(1|2)d(3|4) + submodule/sub/a:(1|2)d(3|4) + EOF + test_cmp expect actual +' test_expect_success 'grep --recurse-submodules should pass the pattern type along' ' # Fixed @@ -380,11 +405,7 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon fi ' -# Recursing down into nested submodules which do not have .gitmodules in their -# working tree does not work yet. This is because config_from_gitmodules() -# uses get_oid() and the latter is still not able to get objects from an -# arbitrary repository (the nested submodule, in this case). -test_expect_failure 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' +test_expect_success 'grep --recurse-submodules with submodules without .gitmodules in the working tree' ' test_when_finished "git -C submodule checkout .gitmodules" && rm submodule/.gitmodules && git grep --recurse-submodules -e "(.|.)[\d]" >actual && @@ -396,4 +417,25 @@ test_expect_failure 'grep --recurse-submodules with submodules without .gitmodul test_cmp expect actual ' +reset_and_clean () { + git reset --hard && + git clean -fd && + git submodule foreach --recursive 'git reset --hard' && + git submodule foreach --recursive 'git clean -fd' +} + +test_expect_success 'grep --recurse-submodules without --cached considers worktree modifications' ' + reset_and_clean && + echo "A modified line in submodule" >>submodule/a && + echo "submodule/a:A modified line in submodule" >expect && + git grep --recurse-submodules "A modified line in submodule" >actual && + test_cmp expect actual +' + +test_expect_success 'grep --recurse-submodules with --cached ignores worktree modifications' ' + reset_and_clean && + echo "A modified line in submodule" >>submodule/a && + test_must_fail git grep --recurse-submodules --cached "A modified line in submodule" >actual 2>&1 && + test_must_be_empty actual +' test_done diff --git a/t/t7008-grep-binary.sh b/t/t7815-grep-binary.sh index 2d87c49..90ebb64 100755 --- a/t/t7008-grep-binary.sh +++ b/t/t7815-grep-binary.sh @@ -4,41 +4,6 @@ test_description='git grep in binary files' . ./test-lib.sh -nul_match () { - matches=$1 - flags=$2 - pattern=$3 - pattern_human=$(echo "$pattern" | sed 's/Q/<NUL>/g') - - if test "$matches" = 1 - then - test_expect_success "git grep -f f $flags '$pattern_human' a" " - printf '$pattern' | q_to_nul >f && - git grep -f f $flags a - " - elif test "$matches" = 0 - then - test_expect_success "git grep -f f $flags '$pattern_human' a" " - printf '$pattern' | q_to_nul >f && - test_must_fail git grep -f f $flags a - " - elif test "$matches" = T1 - then - test_expect_failure "git grep -f f $flags '$pattern_human' a" " - printf '$pattern' | q_to_nul >f && - git grep -f f $flags a - " - elif test "$matches" = T0 - then - test_expect_failure "git grep -f f $flags '$pattern_human' a" " - printf '$pattern' | q_to_nul >f && - test_must_fail git grep -f f $flags a - " - else - test_expect_success "PANIC: Test framework error. Unknown matches value $matches" 'false' - fi -} - test_expect_success 'setup' " echo 'binaryQfileQm[*]cQ*æQð' | q_to_nul >a && git add a && @@ -102,72 +67,6 @@ test_expect_failure 'git grep .fi a' ' git grep .fi a ' -nul_match 1 '-F' 'yQf' -nul_match 0 '-F' 'yQx' -nul_match 1 '-Fi' 'YQf' -nul_match 0 '-Fi' 'YQx' -nul_match 1 '' 'yQf' -nul_match 0 '' 'yQx' -nul_match 1 '' 'æQð' -nul_match 1 '-F' 'eQm[*]c' -nul_match 1 '-Fi' 'EQM[*]C' - -# Regex patterns that would match but shouldn't with -F -nul_match 0 '-F' 'yQ[f]' -nul_match 0 '-F' '[y]Qf' -nul_match 0 '-Fi' 'YQ[F]' -nul_match 0 '-Fi' '[Y]QF' -nul_match 0 '-F' 'æQ[ð]' -nul_match 0 '-F' '[æ]Qð' -nul_match 0 '-Fi' 'ÆQ[Ã]' -nul_match 0 '-Fi' '[Æ]QÃ' - -# kwset is disabled on -i & non-ASCII. No way to match non-ASCII \0 -# patterns case-insensitively. -nul_match T1 '-i' 'ÆQÃ' - -# \0 implicitly disables regexes. This is an undocumented internal -# limitation. -nul_match T1 '' 'yQ[f]' -nul_match T1 '' '[y]Qf' -nul_match T1 '-i' 'YQ[F]' -nul_match T1 '-i' '[Y]Qf' -nul_match T1 '' 'æQ[ð]' -nul_match T1 '' '[æ]Qð' -nul_match T1 '-i' 'ÆQ[Ã]' - -# ... because of \0 implicitly disabling regexes regexes that -# should/shouldn't match don't do the right thing. -nul_match T1 '' 'eQm.*cQ' -nul_match T1 '-i' 'EQM.*cQ' -nul_match T0 '' 'eQm[*]c' -nul_match T0 '-i' 'EQM[*]C' - -# Due to the REG_STARTEND extension when kwset() is disabled on -i & -# non-ASCII the string will be matched in its entirety, but the -# pattern will be cut off at the first \0. -nul_match 0 '-i' 'NOMATCHQð' -nul_match T0 '-i' '[Æ]QNOMATCH' -nul_match T0 '-i' '[æ]QNOMATCH' -# Matches, but for the wrong reasons, just stops at [æ] -nul_match 1 '-i' '[Æ]Qð' -nul_match 1 '-i' '[æ]Qð' - -# Ensure that the matcher doesn't regress to something that stops at -# \0 -nul_match 0 '-F' 'yQ[f]' -nul_match 0 '-Fi' 'YQ[F]' -nul_match 0 '' 'yQNOMATCH' -nul_match 0 '' 'QNOMATCH' -nul_match 0 '-i' 'YQNOMATCH' -nul_match 0 '-i' 'QNOMATCH' -nul_match 0 '-F' 'æQ[ð]' -nul_match 0 '-Fi' 'ÆQ[Ã]' -nul_match 0 '' 'yQNÓMATCH' -nul_match 0 '' 'QNÓMATCH' -nul_match 0 '-i' 'YQNÓMATCH' -nul_match 0 '-i' 'QNÓMATCH' - test_expect_success 'grep respects binary diff attribute' ' echo text >t && git add t && diff --git a/t/t7816-grep-binary-pattern.sh b/t/t7816-grep-binary-pattern.sh new file mode 100755 index 0000000..60bab29 --- /dev/null +++ b/t/t7816-grep-binary-pattern.sh @@ -0,0 +1,127 @@ +#!/bin/sh + +test_description='git grep with a binary pattern files' + +. ./lib-gettext.sh + +nul_match_internal () { + matches=$1 + prereqs=$2 + lc_all=$3 + extra_flags=$4 + flags=$5 + pattern=$6 + pattern_human=$(echo "$pattern" | sed 's/Q/<NUL>/g') + + if test "$matches" = 1 + then + test_expect_success $prereqs "LC_ALL='$lc_all' git grep $extra_flags -f f $flags '$pattern_human' a" " + printf '$pattern' | q_to_nul >f && + LC_ALL='$lc_all' git grep $extra_flags -f f $flags a + " + elif test "$matches" = 0 + then + test_expect_success $prereqs "LC_ALL='$lc_all' git grep $extra_flags -f f $flags '$pattern_human' a" " + >stderr && + printf '$pattern' | q_to_nul >f && + test_must_fail env LC_ALL=\"$lc_all\" git grep $extra_flags -f f $flags a 2>stderr && + test_i18ngrep ! 'This is only supported with -P under PCRE v2' stderr + " + elif test "$matches" = P + then + test_expect_success $prereqs "error, PCRE v2 only: LC_ALL='$lc_all' git grep -f f $flags '$pattern_human' a" " + >stderr && + printf '$pattern' | q_to_nul >f && + test_must_fail env LC_ALL=\"$lc_all\" git grep -f f $flags a 2>stderr && + test_i18ngrep 'This is only supported with -P under PCRE v2' stderr + " + else + test_expect_success "PANIC: Test framework error. Unknown matches value $matches" 'false' + fi +} + +nul_match () { + matches=$1 + matches_pcre2=$2 + matches_pcre2_locale=$3 + flags=$4 + pattern=$5 + pattern_human=$(echo "$pattern" | sed 's/Q/<NUL>/g') + + nul_match_internal "$matches" "" "C" "" "$flags" "$pattern" + nul_match_internal "$matches_pcre2" "LIBPCRE2" "C" "-P" "$flags" "$pattern" + nul_match_internal "$matches_pcre2_locale" "LIBPCRE2,GETTEXT_LOCALE" "$is_IS_locale" "-P" "$flags" "$pattern" +} + +test_expect_success 'setup' " + echo 'binaryQfileQm[*]cQ*æQð' | q_to_nul >a && + git add a && + git commit -m. +" + +# Simple fixed-string matching that can use kwset (no -i && non-ASCII) +nul_match P P P '-F' 'yQf' +nul_match P P P '-F' 'yQx' +nul_match P P P '-Fi' 'YQf' +nul_match P P P '-Fi' 'YQx' +nul_match P P 1 '' 'yQf' +nul_match P P 0 '' 'yQx' +nul_match P P 1 '' 'æQð' +nul_match P P P '-F' 'eQm[*]c' +nul_match P P P '-Fi' 'EQM[*]C' + +# Regex patterns that would match but shouldn't with -F +nul_match P P P '-F' 'yQ[f]' +nul_match P P P '-F' '[y]Qf' +nul_match P P P '-Fi' 'YQ[F]' +nul_match P P P '-Fi' '[Y]QF' +nul_match P P P '-F' 'æQ[ð]' +nul_match P P P '-F' '[æ]Qð' + +# The -F kwset codepath can't handle -i && non-ASCII... +nul_match P 1 1 '-i' '[æ]Qð' + +# ...PCRE v2 only matches non-ASCII with -i casefolding under UTF-8 +# semantics +nul_match P P P '-Fi' 'ÆQ[Ã]' +nul_match P 0 1 '-i' 'ÆQ[Ã]' +nul_match P 0 1 '-i' '[Æ]QÃ' +nul_match P 0 1 '-i' '[Æ]Qð' +nul_match P 0 1 '-i' 'ÆQÃ' + +# \0 in regexes can only work with -P & PCRE v2 +nul_match P P 1 '' 'yQ[f]' +nul_match P P 1 '' '[y]Qf' +nul_match P P 1 '-i' 'YQ[F]' +nul_match P P 1 '-i' '[Y]Qf' +nul_match P P 1 '' 'æQ[ð]' +nul_match P P 1 '' '[æ]Qð' +nul_match P P 1 '-i' 'ÆQ[Ã]' +nul_match P P 1 '' 'eQm.*cQ' +nul_match P P 1 '-i' 'EQM.*cQ' +nul_match P P 0 '' 'eQm[*]c' +nul_match P P 0 '-i' 'EQM[*]C' + +# Assert that we're using REG_STARTEND and the pattern doesn't match +# just because it's cut off at the first \0. +nul_match P P 0 '-i' 'NOMATCHQð' +nul_match P P 0 '-i' '[Æ]QNOMATCH' +nul_match P P 0 '-i' '[æ]QNOMATCH' + +# Ensure that the matcher doesn't regress to something that stops at +# \0 +nul_match P P P '-F' 'yQ[f]' +nul_match P P P '-Fi' 'YQ[F]' +nul_match P P 0 '' 'yQNOMATCH' +nul_match P P 0 '' 'QNOMATCH' +nul_match P P 0 '-i' 'YQNOMATCH' +nul_match P P 0 '-i' 'QNOMATCH' +nul_match P P P '-F' 'æQ[ð]' +nul_match P P P '-Fi' 'ÆQ[Ã]' +nul_match P P 1 '-i' 'ÆQ[Ã]' +nul_match P P 0 '' 'yQNÓMATCH' +nul_match P P 0 '' 'QNÓMATCH' +nul_match P P 0 '-i' 'YQNÓMATCH' +nul_match P P 0 '-i' 'QNÓMATCH' + +test_done diff --git a/t/t8003-blame-corner-cases.sh b/t/t8003-blame-corner-cases.sh index c92a47b..9130b88 100755 --- a/t/t8003-blame-corner-cases.sh +++ b/t/t8003-blame-corner-cases.sh @@ -173,7 +173,6 @@ test_expect_success 'blame during cherry-pick with file rename conflict' ' git show HEAD@{1}:rodent > rodent && git add rodent && git blame -f -C -C1 rodent | sed -e "$pick_fc" >current && - cat current && cat >expected <<-\EOF && mouse-Initial mouse-Second @@ -275,4 +274,40 @@ test_expect_success 'blame file with CRLF core.autocrlf=true' ' grep "A U Thor" actual ' +# Tests the splitting and merging of blame entries in blame_coalesce(). +# The output of blame is the same, regardless of whether blame_coalesce() runs +# or not, so we'd likely only notice a problem if blame crashes or assigned +# blame to the "splitting" commit ('SPLIT' below). +test_expect_success 'blame coalesce' ' + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "original file" && + oid=$(git rev-parse HEAD) && + + cat >giraffe <<-\EOF && + ABC + SPLIT + DEF + EOF + git add giraffe && + git commit -m "interior SPLIT line" && + + cat >giraffe <<-\EOF && + ABC + DEF + EOF + git add giraffe && + git commit -m "same contents as original" && + + cat >expect <<-EOF && + $oid 1) ABC + $oid 2) DEF + EOF + git -c core.abbrev=40 blame -s giraffe >actual && + test_cmp expect actual +' + test_done diff --git a/t/t8013-blame-ignore-revs.sh b/t/t8013-blame-ignore-revs.sh new file mode 100755 index 0000000..36dc31e --- /dev/null +++ b/t/t8013-blame-ignore-revs.sh @@ -0,0 +1,274 @@ +#!/bin/sh + +test_description='ignore revisions when blaming' +. ./test-lib.sh + +# Creates: +# A--B--X +# A added line 1 and B added line 2. X makes changes to those lines. Sanity +# check that X is blamed for both lines. +test_expect_success setup ' + test_commit A file line1 && + + echo line2 >>file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines line-one line-two >file && + git add file && + test_tick && + git commit -m X && + git tag X && + + git blame --line-porcelain file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse X >expect && + test_cmp expect actual + ' + +# Ignore X, make sure A is blamed for line 1 and B for line 2. +test_expect_success ignore_rev_changing_lines ' + git blame --line-porcelain --ignore-rev X file >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# For ignored revs that have added 'unblamable' lines, attribute those to the +# ignored commit. +# A--B--X--Y +# Where Y changes lines 1 and 2, and adds lines 3 and 4. The added lines ought +# to have nothing in common with "line-one" or "line-two", to keep any +# heuristics from matching them with any lines in the parent. +test_expect_success ignore_rev_adding_unblamable_lines ' + test_write_lines line-one-change line-two-changed y3 y4 >file && + git add file && + test_tick && + git commit -m Y && + git tag Y && + + git rev-parse Y >expect && + git blame --line-porcelain file --ignore-rev Y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 3" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 4" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' + +# Ignore X and Y, both in separate files. Lines 1 == A, 2 == B. +test_expect_success ignore_revs_from_files ' + git rev-parse X >ignore_x && + git rev-parse Y >ignore_y && + git blame --line-porcelain file --ignore-revs-file ignore_x --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Ignore X from the config option, Y from a file. +test_expect_success ignore_revs_from_configs_and_files ' + git config --add blame.ignoreRevsFile ignore_x && + git blame --line-porcelain file --ignore-revs-file ignore_y >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse A >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual + ' + +# Override blame.ignoreRevsFile (ignore_x) with an empty string. X should be +# blamed now for lines 1 and 2, since we are no longer ignoring X. +test_expect_success override_ignore_revs_file ' + git blame --line-porcelain file --ignore-revs-file "" --ignore-revs-file ignore_y >blame_raw && + git rev-parse X >expect && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 2" blame_raw | sed -e "s/ .*//" >actual && + test_cmp expect actual + ' +test_expect_success bad_files_and_revs ' + test_must_fail git blame file --ignore-rev NOREV 2>err && + test_i18ngrep "cannot find revision NOREV to ignore" err && + + test_must_fail git blame file --ignore-revs-file NOFILE 2>err && + test_i18ngrep "could not open.*: NOFILE" err && + + echo NOREV >ignore_norev && + test_must_fail git blame file --ignore-revs-file ignore_norev 2>err && + test_i18ngrep "invalid object name: NOREV" err + ' + +# For ignored revs that have added 'unblamable' lines, mark those lines with a +# '*' +# A--B--X--Y +# Lines 3 and 4 are from Y and unblamable. This was set up in +# ignore_rev_adding_unblamable_lines. +test_expect_success mark_unblamable_lines ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# Commit Z will touch the first two lines. Y touched all four. +# A--B--X--Y--Z +# The blame output when ignoring Z should be: +# ?Y ... 1) +# ?Y ... 2) +# Y ... 3) +# Y ... 4) +# We're checking only the first character +test_expect_success mark_ignored_lines ' + git config --add blame.markIgnoredLines true && + + test_write_lines line-one-Z line-two-Z y3 y4 >file && + git add file && + test_tick && + git commit -m Z && + git tag Z && + + git blame --ignore-rev Z file >blame_raw && + echo "?" >expect && + + sed -n "1p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "2p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "3p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + ! test_cmp expect actual + ' + +# For ignored revs that added 'unblamable' lines and more recent commits changed +# the blamable lines, mark the unblamable lines with a +# '*' +# A--B--X--Y--Z +# Lines 3 and 4 are from Y and unblamable, as set up in +# ignore_rev_adding_unblamable_lines. Z changed lines 1 and 2. +test_expect_success mark_unblamable_lines_intermediate ' + git config --add blame.markUnblamableLines true && + + git blame --ignore-rev Y file >blame_raw 2>stderr && + echo "*" >expect && + + sed -n "3p" blame_raw | cut -c1 >actual && + test_cmp expect actual && + + sed -n "4p" blame_raw | cut -c1 >actual && + test_cmp expect actual + ' + +# The heuristic called by guess_line_blames() tries to find the size of a +# blame_entry 'e' in the parent's address space. Those calculations need to +# check for negative or zero values for when a blame entry is completely outside +# the window of the parent's version of a file. +# +# This happens when one commit adds several lines (commit B below). A later +# commit (C) changes one line in the middle of B's change. Commit C gets blamed +# for its change, and that breaks up B's change into multiple blame entries. +# When processing B, one of the blame_entries is outside A's window (which was +# zero - it had no lines added on its side of the diff). +# +# A--B--C, ignore B to test the ignore heuristic's boundary checks. +test_expect_success ignored_chunk_negative_parent_size ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + test_write_lines L1 L2 L3 L4 xxx L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + git blame file --ignore-rev B >blame_raw + ' + +# Resetting the repo and creating: +# +# A--B--M +# \ / +# C-+ +# +# 'A' creates a file. B changes line 1, and C changes line 9. M merges. +test_expect_success ignore_merge ' + rm -rf .git/ && + git init && + + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m A && + git tag A && + + test_write_lines BB L2 L3 L4 L5 L6 L7 L8 L9 >file && + git add file && + test_tick && + git commit -m B && + git tag B && + + git reset --hard A && + test_write_lines L1 L2 L3 L4 L5 L6 L7 L8 CC >file && + git add file && + test_tick && + git commit -m C && + git tag C && + + test_merge M B && + git blame --line-porcelain file --ignore-rev M >blame_raw && + + grep -E "^[0-9a-f]+ [0-9]+ 1" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse B >expect && + test_cmp expect actual && + + grep -E "^[0-9a-f]+ [0-9]+ 9" blame_raw | sed -e "s/ .*//" >actual && + git rev-parse C >expect && + test_cmp expect actual + ' + +test_done diff --git a/t/t8014-blame-ignore-fuzzy.sh b/t/t8014-blame-ignore-fuzzy.sh new file mode 100755 index 0000000..6e61882 --- /dev/null +++ b/t/t8014-blame-ignore-fuzzy.sh @@ -0,0 +1,437 @@ +#!/bin/sh + +test_description='git blame ignore fuzzy heuristic' +. ./test-lib.sh + +pick_author='s/^[0-9a-f^]* *(\([^ ]*\) .*/\1/' + +# Each test is composed of 4 variables: +# titleN - the test name +# aN - the initial content +# bN - the final content +# expectedN - the line numbers from aN that we expect git blame +# on bN to identify, or "Final" if bN itself should +# be identified as the origin of that line. + +# We start at test 2 because setup will show as test 1 +title2="Regression test for partially overlapping search ranges" +cat <<EOF >a2 +1 +2 +3 +abcdef +5 +6 +7 +ijkl +9 +10 +11 +pqrs +13 +14 +15 +wxyz +17 +18 +19 +EOF +cat <<EOF >b2 +abcde +ijk +pqr +wxy +EOF +cat <<EOF >expected2 +4 +8 +12 +16 +EOF + +title3="Combine 3 lines into 2" +cat <<EOF >a3 +if ((maxgrow==0) || + ( single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) +EOF +cat <<EOF >b3 +if ((maxgrow == 0) || (single_line_field && (field->dcols < maxgrow)) || + (!single_line_field && (field->drows < maxgrow))) { +EOF +cat <<EOF >expected3 +2 +3 +EOF + +title4="Add curly brackets" +cat <<EOF >a4 + if (rows) *rows = field->rows; + if (cols) *cols = field->cols; + if (frow) *frow = field->frow; + if (fcol) *fcol = field->fcol; +EOF +cat <<EOF >b4 + if (rows) { + *rows = field->rows; + } + if (cols) { + *cols = field->cols; + } + if (frow) { + *frow = field->frow; + } + if (fcol) { + *fcol = field->fcol; + } +EOF +cat <<EOF >expected4 +1 +1 +Final +2 +2 +Final +3 +3 +Final +4 +4 +Final +EOF + + +title5="Combine many lines and change case" +cat <<EOF >a5 +for(row=0,pBuffer=field->buf; + row<height; + row++,pBuffer+=width ) +{ + if ((len = (int)( After_End_Of_Data( pBuffer, width ) - pBuffer )) > 0) + { + wmove( win, row, 0 ); + waddnstr( win, pBuffer, len ); +EOF +cat <<EOF >b5 +for (Row = 0, PBuffer = field->buf; Row < Height; Row++, PBuffer += Width) { + if ((Len = (int)(afterEndOfData(PBuffer, Width) - PBuffer)) > 0) { + wmove(win, Row, 0); + waddnstr(win, PBuffer, Len); +EOF +cat <<EOF >expected5 +1 +5 +7 +8 +EOF + +title6="Rename and combine lines" +cat <<EOF >a6 +bool need_visual_update = ((form != (FORM *)0) && + (form->status & _POSTED) && + (form->current==field)); + +if (need_visual_update) + Synchronize_Buffer(form); + +if (single_line_field) +{ + growth = field->cols * amount; + if (field->maxgrow) + growth = Minimum(field->maxgrow - field->dcols,growth); + field->dcols += growth; + if (field->dcols == field->maxgrow) +EOF +cat <<EOF >b6 +bool NeedVisualUpdate = ((Form != (FORM *)0) && (Form->status & _POSTED) && + (Form->current == field)); + +if (NeedVisualUpdate) { + synchronizeBuffer(Form); +} + +if (SingleLineField) { + Growth = field->cols * amount; + if (field->maxgrow) { + Growth = Minimum(field->maxgrow - field->dcols, Growth); + } + field->dcols += Growth; + if (field->dcols == field->maxgrow) { +EOF +cat <<EOF >expected6 +1 +3 +4 +5 +6 +Final +7 +8 +10 +11 +12 +Final +13 +14 +EOF + +# Both lines match identically so position must be used to tie-break. +title7="Same line twice" +cat <<EOF >a7 +abc +abc +EOF +cat <<EOF >b7 +abcd +abcd +EOF +cat <<EOF >expected7 +1 +2 +EOF + +title8="Enforce line order" +cat <<EOF >a8 +abcdef +ghijkl +ab +EOF +cat <<EOF >b8 +ghijk +abcd +EOF +cat <<EOF >expected8 +2 +3 +EOF + +title9="Expand lines and rename variables" +cat <<EOF >a9 +int myFunction(int ArgumentOne, Thing *ArgTwo, Blah XuglyBug) { + Squiggle FabulousResult = squargle(ArgumentOne, *ArgTwo, + XuglyBug) + EwwwGlobalWithAReallyLongNameYepTooLong; + return FabulousResult * 42; +} +EOF +cat <<EOF >b9 +int myFunction(int argument_one, Thing *arg_asdfgh, + Blah xugly_bug) { + Squiggle fabulous_result = squargle(argument_one, + *arg_asdfgh, xugly_bug) + + g_ewww_global_with_a_really_long_name_yep_too_long; + return fabulous_result * 42; +} +EOF +cat <<EOF >expected9 +1 +1 +2 +3 +3 +4 +5 +EOF + +title10="Two close matches versus one less close match" +cat <<EOF >a10 +abcdef +abcdef +ghijkl +EOF +cat <<EOF >b10 +gh +abcdefx +EOF +cat <<EOF >expected10 +Final +2 +EOF + +# The first line of b matches best with the last line of a, but the overall +# match is better if we match it with the the first line of a. +title11="Piggy in the middle" +cat <<EOF >a11 +abcdefg +ijklmn +abcdefgh +EOF +cat <<EOF >b11 +abcdefghx +ijklm +EOF +cat <<EOF >expected11 +1 +2 +EOF + +title12="No trailing newline" +printf "abc\ndef" >a12 +printf "abx\nstu" >b12 +cat <<EOF >expected12 +1 +Final +EOF + +title13="Reorder includes" +cat <<EOF >a13 +#include "c.h" +#include "b.h" +#include "a.h" +#include "e.h" +#include "d.h" +EOF +cat <<EOF >b13 +#include "a.h" +#include "b.h" +#include "c.h" +#include "d.h" +#include "e.h" +EOF +cat <<EOF >expected13 +3 +2 +1 +5 +4 +EOF + +last_test=13 + +test_expect_success setup ' + for i in $(test_seq 2 $last_test) + do + # Append each line in a separate commit to make it easy to + # check which original line the blame output relates to. + + line_count=0 && + while IFS= read line + do + line_count=$((line_count+1)) && + echo "$line" >>"$i" && + git add "$i" && + test_tick && + GIT_AUTHOR_NAME="$line_count" git commit -m "$line_count" + done <"a$i" + done && + + for i in $(test_seq 2 $last_test) + do + # Overwrite the files with the final content. + cp b$i $i && + git add $i + done && + test_tick && + + # Commit the final content all at once so it can all be + # referred to with the same commit ID. + GIT_AUTHOR_NAME=Final git commit -m Final && + + IGNOREME=$(git rev-parse HEAD) +' + +for i in $(test_seq 2 $last_test); do + eval title="\$title$i" + test_expect_success "$title" \ + "git blame -M9 --ignore-rev $IGNOREME $i >output && + sed -e \"$pick_author\" output >actual && + test_cmp expected$i actual" +done + +# This invoked a null pointer dereference when the chunk callback was called +# with a zero length parent chunk and there were no more suspects. +test_expect_success 'Diff chunks with no suspects' ' + test_write_lines xy1 A B C xy1 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines xy2 A B xy2 C xy2 >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + REV_2=$(git rev-parse HEAD) && + + test_write_lines xy3 A >file && + git add file && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines 1 1 >expected && + + git blame --ignore-rev $REV_2 --ignore-rev $REV_3 file >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_expect_success 'position matching' ' + test_write_lines abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines abc def abc def >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines abcx defx abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + REV_3=$(git rev-parse HEAD) && + + test_write_lines abcy defy abcx defx >file2 && + git add file2 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines 1 1 2 2 >expected && + + git blame --ignore-rev $REV_3 --ignore-rev $REV_4 file2 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +# This fails if each blame entry is processed independently instead of +# processing each diff change in full. +test_expect_success 'preserve order' ' + test_write_lines bcde >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=1 git commit -m 1 && + + test_write_lines bcde fghij >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=2 git commit -m 2 && + + test_write_lines bcde fghij abcd >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=3 git commit -m 3 && + + test_write_lines abcdx fghijx bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=4 git commit -m 4 && + REV_4=$(git rev-parse HEAD) && + + test_write_lines abcdx fghijy bcdex >file3 && + git add file3 && + test_tick && + GIT_AUTHOR_NAME=5 git commit -m 5 && + REV_5=$(git rev-parse HEAD) && + + test_write_lines 1 2 3 >expected && + + git blame --ignore-rev $REV_4 --ignore-rev $REV_5 file3 >output && + sed -e "$pick_author" output >actual && + + test_cmp expected actual + ' + +test_done diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh index ee1efcc..90f61c3 100755 --- a/t/t9001-send-email.sh +++ b/t/t9001-send-email.sh @@ -481,6 +481,20 @@ test_expect_success $PREREQ 'long lines with auto encoding are quoted-printable' grep "Content-Transfer-Encoding: quoted-printable" msgtxt1 ' +test_expect_success $PREREQ 'carriage returns with auto encoding are quoted-printable' ' + clean_fake_sendmail && + cp $patches cr.patch && + printf "this is a line\r\n" >>cr.patch && + git send-email \ + --from="Example <nobody@example.com>" \ + --to=nobody@example.com \ + --smtp-server="$(pwd)/fake.sendmail" \ + --transfer-encoding=auto \ + --no-validate \ + cr.patch && + grep "Content-Transfer-Encoding: quoted-printable" msgtxt1 +' + for enc in auto quoted-printable base64 do test_expect_success $PREREQ "--validate passes with encoding $enc" ' @@ -1180,8 +1194,8 @@ test_expect_success $PREREQ 'in-reply-to but no threading' ' --to=nobody@example.com \ --in-reply-to="<in-reply-id@example.com>" \ --no-thread \ - $patches | - grep "In-Reply-To: <in-reply-id@example.com>" + $patches >out && + grep "In-Reply-To: <in-reply-id@example.com>" out ' test_expect_success $PREREQ 'no in-reply-to and no threading' ' @@ -1190,7 +1204,7 @@ test_expect_success $PREREQ 'no in-reply-to and no threading' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --no-thread \ - $patches $patches >stdout && + $patches >stdout && ! grep "In-Reply-To: " stdout ' @@ -1210,17 +1224,72 @@ test_expect_success $PREREQ 'sendemail.to works' ' git send-email \ --dry-run \ --from="Example <nobody@example.com>" \ - $patches $patches >stdout && + $patches >stdout && grep "To: Somebody <somebody@ex.com>" stdout ' +test_expect_success $PREREQ 'setup sendemail.identity' ' + git config --replace-all sendemail.to "default@example.com" && + git config --replace-all sendemail.isp.to "isp@example.com" && + git config --replace-all sendemail.cloud.to "cloud@example.com" +' + +test_expect_success $PREREQ 'sendemail.identity: reads the correct identity config' ' + git -c sendemail.identity=cloud send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: identity overrides sendemail.identity' ' + git -c sendemail.identity=cloud send-email \ + --identity=isp \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: isp@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: --no-identity clears previous identity' ' + git -c sendemail.identity=cloud send-email \ + --no-identity \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: default@example.com" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: bool identity variable existence overrides' ' + git -c sendemail.identity=cloud \ + -c sendemail.xmailer=true \ + -c sendemail.cloud.xmailer=false \ + send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout && + ! grep "X-Mailer" stdout +' + +test_expect_success $PREREQ 'sendemail.identity: bool variable fallback' ' + git -c sendemail.identity=cloud \ + -c sendemail.xmailer=false \ + send-email \ + --dry-run \ + --from="nobody@example.com" \ + $patches >stdout && + grep "To: cloud@example.com" stdout && + ! grep "X-Mailer" stdout +' + test_expect_success $PREREQ '--no-to overrides sendemail.to' ' git send-email \ --dry-run \ --from="Example <nobody@example.com>" \ --no-to \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "To: nobody@example.com" stdout && ! grep "To: Somebody <somebody@ex.com>" stdout ' @@ -1231,7 +1300,7 @@ test_expect_success $PREREQ 'sendemail.cc works' ' --dry-run \ --from="Example <nobody@example.com>" \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "Cc: Somebody <somebody@ex.com>" stdout ' @@ -1242,7 +1311,7 @@ test_expect_success $PREREQ '--no-cc overrides sendemail.cc' ' --no-cc \ --cc=bodies@example.com \ --to=nobody@example.com \ - $patches $patches >stdout && + $patches >stdout && grep "Cc: bodies@example.com" stdout && ! grep "Cc: Somebody <somebody@ex.com>" stdout ' @@ -1254,7 +1323,7 @@ test_expect_success $PREREQ 'sendemail.bcc works' ' --from="Example <nobody@example.com>" \ --to=nobody@example.com \ --smtp-server relay.example.com \ - $patches $patches >stdout && + $patches >stdout && grep "RCPT TO:<other@ex.com>" stdout ' @@ -1266,7 +1335,7 @@ test_expect_success $PREREQ '--no-bcc overrides sendemail.bcc' ' --bcc=bodies@example.com \ --to=nobody@example.com \ --smtp-server relay.example.com \ - $patches $patches >stdout && + $patches >stdout && grep "RCPT TO:<bodies@example.com>" stdout && ! grep "RCPT TO:<other@ex.com>" stdout ' @@ -1423,10 +1492,10 @@ test_expect_success $PREREQ 'setup expect' ' EOF ' -test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' ' +test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' clean_fake_sendmail && - git config sendemail.transferEncoding 7bit && - test_must_fail git send-email \ + test_must_fail git -c sendemail.transferEncoding=8bit \ + send-email \ --transfer-encoding=7bit \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ @@ -1435,11 +1504,10 @@ test_expect_success $PREREQ 'sendemail.transferencoding=7bit fails on 8bit data' test -z "$(ls msgtxt*)" ' -test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEncoding' ' +test_expect_success $PREREQ 'sendemail.transferEncoding via config' ' clean_fake_sendmail && - git config sendemail.transferEncoding 8bit && - test_must_fail git send-email \ - --transfer-encoding=7bit \ + test_must_fail git -c sendemail.transferEncoding=7bit \ + send-email \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ 2>errors >out && @@ -1447,16 +1515,15 @@ test_expect_success $PREREQ '--transfer-encoding overrides sendemail.transferEnc test -z "$(ls msgtxt*)" ' -test_expect_success $PREREQ 'sendemail.transferencoding=8bit' ' +test_expect_success $PREREQ 'sendemail.transferEncoding via cli' ' clean_fake_sendmail && - git send-email \ - --transfer-encoding=8bit \ + test_must_fail git send-email \ + --transfer-encoding=7bit \ --smtp-server="$(pwd)/fake.sendmail" \ email-using-8bit \ 2>errors >out && - sed '1,/^$/d' msgtxt1 >actual && - sed '1,/^$/d' email-using-8bit >expected && - test_cmp expected actual + grep "cannot send message as 7bit" errors && + test -z "$(ls msgtxt*)" ' test_expect_success $PREREQ 'setup expect' ' @@ -1773,6 +1840,15 @@ test_expect_success '--dump-aliases must be used alone' ' test_must_fail git send-email --dump-aliases --to=janice@example.com -1 refs/heads/accounting ' +test_expect_success $PREREQ 'aliases and sendemail.identity' ' + test_must_fail git \ + -c sendemail.identity=cloud \ + -c sendemail.aliasesfile=default-aliases \ + -c sendemail.cloud.aliasesfile=cloud-aliases \ + send-email -1 2>stderr && + test_i18ngrep "cloud-aliases" stderr +' + test_sendmail_aliases () { msg="$1" && shift && expect="$@" && @@ -1990,7 +2066,7 @@ test_expect_success $PREREQ 'leading and trailing whitespaces are removed' ' TO1=$(echo "QTo 1 <to1@example.com>" | q_to_tab) && TO2=$(echo "QZto2" | qz_to_tab_space) && CC1=$(echo "cc1" | append_cr) && - BCC1=$(echo "Q bcc1@example.com Q" | q_to_nul) && + BCC1=$(echo " bcc1@example.com Q" | q_to_nul) && git send-email \ --dry-run \ --from=" Example <from@example.com>" \ diff --git a/t/t9010-svn-fe.sh b/t/t9010-svn-fe.sh index 0b20b07..c90fdc5 100755 --- a/t/t9010-svn-fe.sh +++ b/t/t9010-svn-fe.sh @@ -53,8 +53,6 @@ text_no_props () { printf "%s\n" "$text" } ->empty - test_expect_success 'empty dump' ' reinit_git && echo "SVN-fs-dump-format-version: 2" >input && @@ -208,7 +206,7 @@ test_expect_failure 'timestamp and empty file' ' test_cmp expect.date actual.date && test_cmp expect.files actual.files && git checkout HEAD empty-file && - test_cmp empty file + test_must_be_empty file ' test_expect_success 'directory with files' ' diff --git a/t/t9106-git-svn-commit-diff-clobber.sh b/t/t9106-git-svn-commit-diff-clobber.sh index dbe8dea..aec45bc 100755 --- a/t/t9106-git-svn-commit-diff-clobber.sh +++ b/t/t9106-git-svn-commit-diff-clobber.sh @@ -92,7 +92,8 @@ test_expect_success 'multiple dcommit from git svn will not clobber svn' " test_expect_success 'check that rebase really failed' ' - test -d .git/rebase-apply + git status >output && + grep currently.rebasing output ' test_expect_success 'resolve, continue the rebase and dcommit' " diff --git a/t/t9115-git-svn-dcommit-funky-renames.sh b/t/t9115-git-svn-dcommit-funky-renames.sh index 64bb495..9b44a44 100755 --- a/t/t9115-git-svn-dcommit-funky-renames.sh +++ b/t/t9115-git-svn-dcommit-funky-renames.sh @@ -120,6 +120,4 @@ test_expect_success !MINGW,!UTF8_NFD_TO_NFC 'svn.pathnameencoding=cp932 rename o git svn dcommit ' -stop_httpd - test_done diff --git a/t/t9116-git-svn-log.sh b/t/t9116-git-svn-log.sh index 45773ee..0a9f1ef 100755 --- a/t/t9116-git-svn-log.sh +++ b/t/t9116-git-svn-log.sh @@ -43,14 +43,18 @@ test_expect_success 'setup repository and import' ' test_expect_success 'run log' " git reset --hard origin/a && - git svn log -r2 origin/trunk | grep ^r2 && - git svn log -r4 origin/trunk | grep ^r4 && - git svn log -r3 | grep ^r3 + git svn log -r2 origin/trunk >out && + grep ^r2 out && + git svn log -r4 origin/trunk >out && + grep ^r4 out && + git svn log -r3 >out && + grep ^r3 out " test_expect_success 'run log against a from trunk' " git reset --hard origin/trunk && - git svn log -r3 origin/a | grep ^r3 + git svn log -r3 origin/a >out && + grep ^r3 out " printf 'r1 \nr2 \nr4 \n' > expected-range-r1-r2-r4 diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh index 41a0266..a159ff9 100755 --- a/t/t9118-git-svn-funky-branch-names.sh +++ b/t/t9118-git-svn-funky-branch-names.sh @@ -87,6 +87,4 @@ test_expect_success 'test dcommit to trailing_dotlock branch' ' ) ' -stop_httpd - test_done diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh index b28a174..40b714d 100755 --- a/t/t9120-git-svn-clone-with-percent-escapes.sh +++ b/t/t9120-git-svn-clone-with-percent-escapes.sh @@ -74,6 +74,4 @@ test_expect_success 'test clone -s with unescaped space' ' ) ' -stop_httpd - test_done diff --git a/t/t9142-git-svn-shallow-clone.sh b/t/t9142-git-svn-shallow-clone.sh index 9ee23be..a307305 100755 --- a/t/t9142-git-svn-shallow-clone.sh +++ b/t/t9142-git-svn-shallow-clone.sh @@ -26,6 +26,4 @@ test_expect_success 'clone trunk with "-r HEAD"' ' ( cd g && git rev-parse --symbolic --verify HEAD ) ' -stop_httpd - test_done diff --git a/t/t9300-fast-import.sh b/t/t9300-fast-import.sh index 377c2b4..3e41c58 100755 --- a/t/t9300-fast-import.sh +++ b/t/t9300-fast-import.sh @@ -85,6 +85,36 @@ test_expect_success 'A: create pack from stdin' ' An annotated tag that annotates a blob. EOF + tag to-be-deleted + from :3 + data <<EOF + Another annotated tag that annotates a blob. + EOF + + reset refs/tags/to-be-deleted + from 0000000000000000000000000000000000000000 + + tag nested + mark :6 + from :4 + data <<EOF + Tag of our lovely commit + EOF + + reset refs/tags/nested + from 0000000000000000000000000000000000000000 + + tag nested + mark :7 + from :6 + data <<EOF + Tag of tag of our lovely commit + EOF + + alias + mark :8 + to :5 + INPUT_END git fast-import --export-marks=marks.out <input && git whatchanged master @@ -157,12 +187,19 @@ test_expect_success 'A: verify tag/series-A-blob' ' test_cmp expect actual ' +test_expect_success 'A: verify tag deletion is successful' ' + test_must_fail git rev-parse --verify refs/tags/to-be-deleted +' + test_expect_success 'A: verify marks output' ' cat >expect <<-EOF && :2 $(git rev-parse --verify master:file2) :3 $(git rev-parse --verify master:file3) :4 $(git rev-parse --verify master:file4) :5 $(git rev-parse --verify master^0) + :6 $(git cat-file tag nested | grep object | cut -d" " -f 2) + :7 $(git rev-parse --verify nested) + :8 $(git rev-parse --verify master^0) EOF test_cmp expect marks.out ' @@ -1010,7 +1047,6 @@ test_expect_success 'M: rename root to subdirectory' ' EOF git fast-import <input && git diff-tree -M -r M4^ M4 >actual && - cat actual && compare_diff_raw expect actual ' @@ -2470,9 +2506,6 @@ test_expect_success PIPE 'R: copy using cat-file' ' echo $expect_id blob $expect_len >expect.response && rm -f blobs && - cat >frontend <<-\FRONTEND_END && - #!/bin/sh - FRONTEND_END mkfifo blobs && ( @@ -2811,7 +2844,6 @@ test_expect_success 'S: filemodify with garbage after mark must fail' ' COMMIT M 100644 :403x hello.c EOF - cat err && test_i18ngrep "space after mark" err ' @@ -2828,7 +2860,6 @@ test_expect_success 'S: filemodify with garbage after inline must fail' ' inline BLOB EOF - cat err && test_i18ngrep "nvalid dataref" err ' @@ -2842,7 +2873,6 @@ test_expect_success 'S: filemodify with garbage after sha1 must fail' ' COMMIT M 100644 ${sha1}x hello.c EOF - cat err && test_i18ngrep "space after SHA1" err ' @@ -2858,7 +2888,6 @@ test_expect_success 'S: notemodify with garbage after mark dataref must fail' ' COMMIT N :202x :302 EOF - cat err && test_i18ngrep "space after mark" err ' @@ -2874,7 +2903,6 @@ test_expect_success 'S: notemodify with garbage after inline dataref must fail' note blob BLOB EOF - cat err && test_i18ngrep "nvalid dataref" err ' @@ -2888,7 +2916,6 @@ test_expect_success 'S: notemodify with garbage after sha1 dataref must fail' ' COMMIT N ${sha1}x :302 EOF - cat err && test_i18ngrep "space after SHA1" err ' @@ -2904,7 +2931,6 @@ test_expect_success 'S: notemodify with garbage after mark commit-ish must fail' COMMIT N :202 :302x EOF - cat err && test_i18ngrep "after mark" err ' @@ -2938,7 +2964,6 @@ test_expect_success 'S: from with garbage after mark must fail' ' EOF # now evaluate the error - cat err && test_i18ngrep "after mark" err ' @@ -2958,7 +2983,6 @@ test_expect_success 'S: merge with garbage after mark must fail' ' merge :303x M 100644 :403 hello.c EOF - cat err && test_i18ngrep "after mark" err ' @@ -2974,7 +2998,6 @@ test_expect_success 'S: tag with garbage after mark must fail' ' tag S TAG EOF - cat err && test_i18ngrep "after mark" err ' @@ -2985,7 +3008,6 @@ test_expect_success 'S: cat-blob with garbage after mark must fail' ' test_must_fail git fast-import --import-marks=marks <<-EOF 2>err && cat-blob :403x EOF - cat err && test_i18ngrep "after mark" err ' @@ -2996,7 +3018,6 @@ test_expect_success 'S: ls with garbage after mark must fail' ' test_must_fail git fast-import --import-marks=marks <<-EOF 2>err && ls :302x hello.c EOF - cat err && test_i18ngrep "space after mark" err ' @@ -3005,7 +3026,6 @@ test_expect_success 'S: ls with garbage after sha1 must fail' ' test_must_fail git fast-import --import-marks=marks <<-EOF 2>err && ls ${sha1}x hello.c EOF - cat err && test_i18ngrep "space after tree-ish" err ' @@ -3170,13 +3190,22 @@ background_import_then_checkpoint () { exec 9<>V.output rm V.output - git fast-import $options <&8 >&9 & - echo $! >V.pid + ( + git fast-import $options <&8 >&9 & + echo $! >&9 + wait $! + echo >&2 "background fast-import terminated too early with exit code $?" + # Un-block the read loop in the main shell process. + echo >&9 UNEXPECTED + ) & + sh_pid=$! + read fi_pid <&9 # We don't mind if fast-import has already died by the time the test # ends. test_when_finished " exec 8>&-; exec 9>&-; - kill $(cat V.pid) && wait $(cat V.pid) + kill $sh_pid && wait $sh_pid + kill $fi_pid && wait $fi_pid true" # Start in the background to ensure we adhere strictly to (blocking) @@ -3196,6 +3225,9 @@ background_import_then_checkpoint () { then error=0 break + elif test "$output" = "UNEXPECTED" + then + break fi # otherwise ignore cruft echo >&2 "cruft: $output" @@ -3208,7 +3240,7 @@ background_import_then_checkpoint () { } background_import_still_running () { - if ! kill -0 "$(cat V.pid)" + if ! kill -0 "$fi_pid" then echo >&2 "background fast-import terminated too early" false @@ -3292,4 +3324,61 @@ test_expect_success PIPE 'V: checkpoint updates tags after tag' ' background_import_still_running ' +### +### series W (get-mark and empty orphan commits) +### + +cat >>W-input <<-W_INPUT_END + commit refs/heads/W-branch + mark :1 + author Full Name <user@company.tld> 1000000000 +0100 + committer Full Name <user@company.tld> 1000000000 +0100 + data 27 + Intentionally empty commit + LFsget-mark :1 + W_INPUT_END + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with no newlines' ' + sed -e s/LFs// W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with one newline' ' + sed -e s/LFs/L/ W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with ugly second newline' ' + # Technically, this should fail as it has too many linefeeds + # according to the grammar in fast-import.txt. But, for whatever + # reason, it works. Since using the correct number of newlines + # does not work with older (pre-2.22) versions of git, allow apps + # that used this second-newline workaround to keep working by + # checking it with this test... + sed -e s/LFs/LL/ W-input | tr L "\n" | git fast-import +' + +test_expect_success !MINGW 'W: get-mark & empty orphan commit with erroneous third newline' ' + # ...but do NOT allow more empty lines than that (see previous test). + sed -e s/LFs/LLL/ W-input | tr L "\n" | test_must_fail git fast-import +' + +### +### series X (other new features) +### + +test_expect_success 'X: handling encoding' ' + test_tick && + cat >input <<-INPUT_END && + commit refs/heads/encoding + committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + encoding iso-8859-7 + data <<COMMIT + INPUT_END + + printf "Pi: \360\nCOMMIT\n" >>input && + + git fast-import <input && + git cat-file -p encoding | grep $(printf "\360") && + git log -1 --format=%B encoding | grep $(printf "\317\200") +' + test_done diff --git a/t/t9301-fast-import-notes.sh b/t/t9301-fast-import-notes.sh index dadc70b..ca223dc 100755 --- a/t/t9301-fast-import-notes.sh +++ b/t/t9301-fast-import-notes.sh @@ -275,7 +275,7 @@ $whitespace third note for first commit EXPECT_END -test_expect_success 'add concatentation notes with M command' ' +test_expect_success 'add concatenation notes with M command' ' git fast-import <input && GIT_NOTES_REF=refs/notes/test git log | grep "^ " > actual && diff --git a/t/t9303-fast-import-compression.sh b/t/t9303-fast-import-compression.sh index 856219f..5045f02 100755 --- a/t/t9303-fast-import-compression.sh +++ b/t/t9303-fast-import-compression.sh @@ -6,7 +6,7 @@ test_description='compression setting of fast-import utility' # This should be moved to test-lib.sh together with the # copy in t0021 after both topics have graduated to 'master'. file_size () { - perl -e 'print -s $ARGV[0]' "$1" + test-tool path-utils file-size "$1" } import_large () { diff --git a/t/t9350-fast-export.sh b/t/t9350-fast-export.sh index ef1e018..690c90f 100755 --- a/t/t9350-fast-export.sh +++ b/t/t9350-fast-export.sh @@ -53,6 +53,33 @@ test_expect_success 'fast-export | fast-import' ' ' +test_expect_success 'fast-export ^muss^{commit} muss' ' + git fast-export --tag-of-filtered-object=rewrite ^muss^{commit} muss >actual && + cat >expected <<-EOF && + tag muss + from $(git rev-parse --verify muss^{commit}) + $(git cat-file tag muss | grep tagger) + data 9 + valentin + + EOF + test_cmp expected actual +' + +test_expect_success 'fast-export --mark-tags ^muss^{commit} muss' ' + git fast-export --mark-tags --tag-of-filtered-object=rewrite ^muss^{commit} muss >actual && + cat >expected <<-EOF && + tag muss + mark :1 + from $(git rev-parse --verify muss^{commit}) + $(git cat-file tag muss | grep tagger) + data 9 + valentin + + EOF + test_cmp expected actual +' + test_expect_success 'fast-export master~2..master' ' git fast-export master~2..master >actual && @@ -66,22 +93,111 @@ test_expect_success 'fast-export master~2..master' ' ' -test_expect_success 'iso-8859-1' ' +test_expect_success 'fast-export --reference-excluded-parents master~2..master' ' + + git fast-export --reference-excluded-parents master~2..master >actual && + grep commit.refs/heads/master actual >commit-count && + test_line_count = 2 commit-count && + sed "s/master/rewrite/" actual | + (cd new && + git fast-import && + test $MASTER = $(git rev-parse --verify refs/heads/rewrite)) +' + +test_expect_success 'fast-export --show-original-ids' ' + + git fast-export --show-original-ids master >output && + grep ^original-oid output| sed -e s/^original-oid.// | sort >actual && + git rev-list --objects master muss >objects-and-names && + awk "{print \$1}" objects-and-names | sort >commits-trees-blobs && + comm -23 actual commits-trees-blobs >unfound && + test_must_be_empty unfound +' + +test_expect_success 'fast-export --show-original-ids | git fast-import' ' + + git fast-export --show-original-ids master muss | git fast-import --quiet && + test $MASTER = $(git rev-parse --verify refs/heads/master) && + test $MUSS = $(git rev-parse --verify refs/tags/muss) +' - git config i18n.commitencoding ISO8859-1 && - # use author and committer name in ISO-8859-1 to match it. - . "$TEST_DIRECTORY"/t3901/8859-1.txt && +test_expect_success 'reencoding iso-8859-7' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && test_tick && echo rosten >file && - git commit -s -m den file && - git fast-export wer^..wer >iso8859-1.fi && - sed "s/wer/i18n/" iso8859-1.fi | + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=yes wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n/" iso-8859-7.fi | (cd new && git fast-import && + # The commit object, if not re-encoded, would be 240 bytes. + # Removing the "encoding iso-8859-7\n" header drops 20 bytes. + # Re-encoding the Pi character from \xF0 (\360) in iso-8859-7 + # to \xCF\x80 (\317\200) in UTF-8 adds a byte. Check for + # the expected size. + test 221 -eq "$(git cat-file -s i18n)" && + # ...and for the expected translation of bytes. git cat-file commit i18n >actual && - grep "Ãéà óú" actual) + grep $(printf "\317\200") actual && + # Also make sure the commit does not have the "encoding" header + ! grep ^encoding actual) +' +test_expect_success 'aborting on iso-8859-7' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + test_must_fail git fast-export --reencode=abort wer^..wer >iso-8859-7.fi ' + +test_expect_success 'preserving iso-8859-7' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/simple-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=no wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n-no-recoding/" iso-8859-7.fi | + (cd new && + git fast-import && + # The commit object, if not re-encoded, is 240 bytes. + # Removing the "encoding iso-8859-7\n" header would drops 20 + # bytes. Re-encoding the Pi character from \xF0 (\360) in + # iso-8859-7 to \xCF\x80 (\317\200) in UTF-8 adds a byte. + # Check for the expected size... + test 240 -eq "$(git cat-file -s i18n-no-recoding)" && + # ...as well as the expected byte. + git cat-file commit i18n-no-recoding >actual && + grep $(printf "\360") actual && + # Also make sure the commit has the "encoding" header + grep ^encoding actual) +' + +test_expect_success 'encoding preserved if reencoding fails' ' + + test_when_finished "git reset --hard HEAD~1" && + test_config i18n.commitencoding iso-8859-7 && + echo rosten >file && + git commit -s -F "$TEST_DIRECTORY/t9350/broken-iso-8859-7-commit-message.txt" file && + git fast-export --reencode=yes wer^..wer >iso-8859-7.fi && + sed "s/wer/i18n-invalid/" iso-8859-7.fi | + (cd new && + git fast-import && + git cat-file commit i18n-invalid >actual && + # Make sure the commit still has the encoding header + grep ^encoding actual && + # Verify that the commit has the expected size; i.e. + # that no bytes were re-encoded to a different encoding. + test 252 -eq "$(git cat-file -s i18n-invalid)" && + # ...and check for the original special bytes + grep $(printf "\360") actual && + grep $(printf "\377") actual) +' + test_expect_success 'import/export-marks' ' git checkout -b marks master && @@ -196,7 +312,6 @@ GIT_COMMITTER_NAME='C O Mitter'; export GIT_COMMITTER_NAME test_expect_success 'setup copies' ' - git config --unset i18n.commitencoding && git checkout -b copy rein && git mv file file3 && git commit -m move1 && @@ -325,6 +440,22 @@ test_expect_success 'rewriting tag of filtered out object' ' ) ' +test_expect_success 'rewrite tag predating pathspecs to nothing' ' + test_create_repo rewrite_tag_predating_pathspecs && + ( + cd rewrite_tag_predating_pathspecs && + + test_commit initial && + + git tag -a -m "Some old tag" v0.0.0.0.0.0.1 && + + test_commit bar && + + git fast-export --tag-of-filtered-object=rewrite --all -- bar.t >output && + grep from.$ZERO_OID output + ) +' + cat > limit-by-paths/expected << EOF blob mark :1 @@ -366,6 +497,26 @@ test_expect_success 'path limiting with import-marks does not lose unmodified fi grep file0 actual ' +test_expect_success 'avoid corrupt stream with non-existent mark' ' + test_create_repo avoid_non_existent_mark && + ( + cd avoid_non_existent_mark && + + test_commit important-path && + + test_commit ignored && + + git branch A && + git branch B && + + echo foo >>important-path.t && + git add important-path.t && + test_commit more changes && + + git fast-export --all -- important-path.t | git fast-import --force + ) +' + test_expect_success 'full-tree re-shows unmodified files' ' git checkout -f simple && git fast-export --full-tree simple >actual && @@ -389,10 +540,41 @@ test_expect_success 'tree_tag' ' ' # NEEDSWORK: not just check return status, but validate the output +# Note that these tests DO NOTHING other than print a warning that +# they are omitting the one tag we asked them to export (because the +# tags resolve to a tree). They exist just to make sure we do not +# abort but instead just warn. test_expect_success 'tree_tag-obj' 'git fast-export tree_tag-obj' test_expect_success 'tag-obj_tag' 'git fast-export tag-obj_tag' test_expect_success 'tag-obj_tag-obj' 'git fast-export tag-obj_tag-obj' +test_expect_success 'handling tags of blobs' ' + git tag -a -m "Tag of a blob" blobtag $(git rev-parse master:file) && + git fast-export blobtag >actual && + cat >expect <<-EOF && + blob + mark :1 + data 9 + die Luft + + tag blobtag + from :1 + tagger $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE + data 14 + Tag of a blob + + EOF + test_cmp expect actual +' + +test_expect_success 'handling nested tags' ' + git tag -a -m "This is a nested tag" nested muss && + git fast-export --mark-tags nested >output && + grep "^from $ZERO_OID$" output && + grep "^tag nested$" output >tag_lines && + test_line_count = 2 tag_lines +' + test_expect_success 'directory becomes symlink' ' git init dirtosymlink && git init result && @@ -444,17 +626,15 @@ test_expect_success 'fast-export quotes pathnames' ' ' test_expect_success 'test bidirectionality' ' - >marks-cur && - >marks-new && git init marks-test && - git fast-export --export-marks=marks-cur --import-marks=marks-cur --branches | \ - git --git-dir=marks-test/.git fast-import --export-marks=marks-new --import-marks=marks-new && + git fast-export --export-marks=marks-cur --import-marks-if-exists=marks-cur --branches | \ + git --git-dir=marks-test/.git fast-import --export-marks=marks-new --import-marks-if-exists=marks-new && (cd marks-test && git reset --hard && echo Wohlauf > file && git commit -a -m "back in time") && - git --git-dir=marks-test/.git fast-export --export-marks=marks-new --import-marks=marks-new --branches | \ - git fast-import --export-marks=marks-cur --import-marks=marks-cur + git --git-dir=marks-test/.git fast-export --export-marks=marks-new --import-marks-if-exists=marks-new --branches | \ + git fast-import --export-marks=marks-cur --import-marks-if-exists=marks-cur ' cat > expected << EOF @@ -509,10 +689,20 @@ test_expect_success 'use refspec' ' test_cmp expected actual ' -test_expect_success 'delete refspec' ' +test_expect_success 'delete ref because entire history excluded' ' git branch to-delete && - git fast-export --refspec :refs/heads/to-delete to-delete ^to-delete > actual && - cat > expected <<-EOF && + git fast-export to-delete ^to-delete >actual && + cat >expected <<-EOF && + reset refs/heads/to-delete + from 0000000000000000000000000000000000000000 + + EOF + test_cmp expected actual +' + +test_expect_success 'delete refspec' ' + git fast-export --refspec :refs/heads/to-delete >actual && + cat >expected <<-EOF && reset refs/heads/to-delete from 0000000000000000000000000000000000000000 diff --git a/t/t9350/broken-iso-8859-7-commit-message.txt b/t/t9350/broken-iso-8859-7-commit-message.txt new file mode 100644 index 0000000..d06ad75 --- /dev/null +++ b/t/t9350/broken-iso-8859-7-commit-message.txt @@ -0,0 +1 @@ +Pi: ð; Invalid: ÿ
\ No newline at end of file diff --git a/t/t9350/simple-iso-8859-7-commit-message.txt b/t/t9350/simple-iso-8859-7-commit-message.txt new file mode 100644 index 0000000..8b3f0c3 --- /dev/null +++ b/t/t9350/simple-iso-8859-7-commit-message.txt @@ -0,0 +1 @@ +Pi: ð
\ No newline at end of file diff --git a/t/t9502-gitweb-standalone-parse-output.sh b/t/t9502-gitweb-standalone-parse-output.sh index 0796a43..e38cbc9 100755 --- a/t/t9502-gitweb-standalone-parse-output.sh +++ b/t/t9502-gitweb-standalone-parse-output.sh @@ -188,8 +188,8 @@ test_expect_success 'forks: project_index lists all projects (incl. forks)' ' ' xss() { - echo >&2 "Checking $1..." && - gitweb_run "$1" && + echo >&2 "Checking $*..." && + gitweb_run "$@" && if grep "$TAG" gitweb.body; then echo >&2 "xss: $TAG should have been quoted in output" return 1 @@ -200,7 +200,8 @@ xss() { test_expect_success 'xss checks' ' TAG="<magic-xss-tag>" && xss "a=rss&p=$TAG" && - xss "a=rss&p=foo.git&f=$TAG" + xss "a=rss&p=foo.git&f=$TAG" && + xss "" "$TAG+" ' test_done diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh index 729cd25..c98c1df 100755 --- a/t/t9800-git-p4-basic.sh +++ b/t/t9800-git-p4-basic.sh @@ -202,7 +202,6 @@ test_expect_success 'exit when p4 fails to produce marshaled output' ' export PATH && test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1 ) && - cat errs && test_i18ngrep ! Traceback errs ' @@ -326,8 +325,4 @@ test_expect_success 'submit from worktree' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9801-git-p4-branch.sh b/t/t9801-git-p4-branch.sh index 6a86d69..67ff271 100755 --- a/t/t9801-git-p4-branch.sh +++ b/t/t9801-git-p4-branch.sh @@ -151,7 +151,7 @@ test_expect_success 'import depot, branch detection, branchList branch definitio ' test_expect_success 'restart p4d' ' - kill_p4d && + stop_and_cleanup_p4d && start_p4d ' @@ -411,6 +411,46 @@ test_expect_failure 'git p4 clone file subset branch' ' ) ' +# Check that excluded files are omitted during import +test_expect_success 'git p4 clone complex branches with excluded files' ' + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList branch1:branch2 && + git config --add git-p4.branchList branch1:branch3 && + git config --add git-p4.branchList branch1:branch4 && + git config --add git-p4.branchList branch1:branch5 && + git config --add git-p4.branchList branch1:branch6 && + git p4 clone --dest=. --detect-branches -//depot/branch1/file2 -//depot/branch2/file2 -//depot/branch3/file2 -//depot/branch4/file2 -//depot/branch5/file2 -//depot/branch6/file2 //depot@all && + git log --all --graph --decorate --stat && + git reset --hard p4/depot/branch1 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch2 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 && + git reset --hard p4/depot/branch3 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 && + git reset --hard p4/depot/branch4 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch5 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_file file3 && + git reset --hard p4/depot/branch6 && + test_path_is_file file1 && + test_path_is_missing file2 && + test_path_is_missing file3 + ) +' + # From a report in http://stackoverflow.com/questions/11893688 # where --use-client-spec caused branch prefixes not to be removed; # every file in git appeared into a subdirectory of the branch name. @@ -505,7 +545,7 @@ test_expect_success 'use-client-spec detect-branches skips files in branches' ' ' test_expect_success 'restart p4d' ' - kill_p4d && + stop_and_cleanup_p4d && start_p4d ' @@ -610,8 +650,96 @@ test_expect_success 'Update a file in git side and submit to P4 using client vie ) ' -test_expect_success 'kill p4d' ' - kill_p4d +test_expect_success 'restart p4d (case folding enabled)' ' + stop_and_cleanup_p4d && + start_p4d -C1 +' + +# +# 1: //depot/main/mf1 +# 2: integrate //depot/main/... -> //depot/branch1/... +# 3: //depot/main/mf2 +# 4: //depot/BRANCH1/B1f3 +# 5: //depot/branch1/b1f4 +# +test_expect_success !CASE_INSENSITIVE_FS 'basic p4 branches for case folding' ' + ( + cd "$cli" && + mkdir -p main && + + echo mf1 >main/mf1 && + p4 add main/mf1 && + p4 submit -d "main/mf1" && + + p4 integrate //depot/main/... //depot/branch1/... && + p4 submit -d "integrate main to branch1" && + + echo mf2 >main/mf2 && + p4 add main/mf2 && + p4 submit -d "main/mf2" && + + mkdir BRANCH1 && + echo B1f3 >BRANCH1/B1f3 && + p4 add BRANCH1/B1f3 && + p4 submit -d "BRANCH1/B1f3" && + + echo b1f4 >branch1/b1f4 && + p4 add branch1/b1f4 && + p4 submit -d "branch1/b1f4" + ) +' + +# Check that files are properly split across branches when ignorecase is set +test_expect_success !CASE_INSENSITIVE_FS 'git p4 clone, branchList branch definition, ignorecase' ' + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList main:branch1 && + git config --type=bool core.ignoreCase true && + git p4 clone --dest=. --detect-branches //depot@all && + + git log --all --graph --decorate --stat && + + git reset --hard p4/master && + test_path_is_file mf1 && + test_path_is_file mf2 && + test_path_is_missing B1f3 && + test_path_is_missing b1f4 && + + git reset --hard p4/depot/branch1 && + test_path_is_file mf1 && + test_path_is_missing mf2 && + test_path_is_file B1f3 && + test_path_is_file b1f4 + ) +' + +# Check that files are properly split across branches when ignorecase is set, use-client-spec case +test_expect_success !CASE_INSENSITIVE_FS 'git p4 clone with client-spec, branchList branch definition, ignorecase' ' + client_view "//depot/... //client/..." && + test_when_finished cleanup_git && + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList main:branch1 && + git config --type=bool core.ignoreCase true && + git p4 clone --dest=. --use-client-spec --detect-branches //depot@all && + + git log --all --graph --decorate --stat && + + git reset --hard p4/master && + test_path_is_file mf1 && + test_path_is_file mf2 && + test_path_is_missing B1f3 && + test_path_is_missing b1f4 && + + git reset --hard p4/depot/branch1 && + test_path_is_file mf1 && + test_path_is_missing mf2 && + test_path_is_file B1f3 && + test_path_is_file b1f4 + ) ' test_done diff --git a/t/t9802-git-p4-filetype.sh b/t/t9802-git-p4-filetype.sh index 9978352..94edebe 100755 --- a/t/t9802-git-p4-filetype.sh +++ b/t/t9802-git-p4-filetype.sh @@ -333,8 +333,4 @@ test_expect_success SYMLINKS 'empty symlink target' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9803-git-p4-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh index d5c3675..2913277 100755 --- a/t/t9803-git-p4-shell-metachars.sh +++ b/t/t9803-git-p4-shell-metachars.sh @@ -105,8 +105,4 @@ test_expect_success 'branch with shell char' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9804-git-p4-label.sh b/t/t9804-git-p4-label.sh index e30f80e..3236457 100755 --- a/t/t9804-git-p4-label.sh +++ b/t/t9804-git-p4-label.sh @@ -108,8 +108,4 @@ test_expect_failure 'two labels on the same changelist' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9805-git-p4-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh index 5fbf904..90ef647 100755 --- a/t/t9805-git-p4-skip-submit-edit.sh +++ b/t/t9805-git-p4-skip-submit-edit.sh @@ -98,8 +98,4 @@ test_expect_success 'no config, edited' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh index 3f5291b..4e794a0 100755 --- a/t/t9806-git-p4-options.sh +++ b/t/t9806-git-p4-options.sh @@ -300,9 +300,4 @@ test_expect_success 'use --git-dir option and GIT_DIR' ' test_path_is_file "$git"/cli_file2.t ' - -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9807-git-p4-submit.sh b/t/t9807-git-p4-submit.sh index 2325599..eaaae41 100755 --- a/t/t9807-git-p4-submit.sh +++ b/t/t9807-git-p4-submit.sh @@ -500,6 +500,10 @@ test_expect_success 'submit --shelve' ' ) ' +last_shelve () { + p4 -G changes -s shelved -m 1 //depot/... | marshal_dump change +} + make_shelved_cl() { test_commit "$1" >/dev/null && git p4 submit --origin HEAD^ --shelve >/dev/null && @@ -533,17 +537,60 @@ test_expect_success 'submit --update-shelve' ' ) && ( cd "$cli" && - change=$(p4 -G changes -s shelved -m 1 //depot/... | \ - marshal_dump change) && + change=$(last_shelve) && p4 unshelve -c $change -s $change && grep -q updated-line shelf.t && p4 describe -S $change | grep added-file.t && - test_path_is_missing shelved-change-1.t + test_path_is_missing shelved-change-1.t && + p4 revert ... ) ' -test_expect_success 'kill p4d' ' - kill_p4d +test_expect_success 'update a shelve involving moved and copied files' ' + test_when_finished cleanup_git && + ( + cd "$cli" && + : >file_to_move && + p4 add file_to_move && + p4 submit -d "change1" && + p4 edit file_to_move && + echo change >>file_to_move && + p4 submit -d "change2" && + p4 opened + ) && + git p4 clone --dest="$git" //depot && + ( + cd "$git" && + git config git-p4.detectCopies true && + git config git-p4.detectRenames true && + git config git-p4.skipSubmitEdit true && + mkdir moved && + cp file_to_move copy_of_file && + git add copy_of_file && + git mv file_to_move moved/ && + git commit -m "rename a file" && + git p4 submit -M --shelve --origin HEAD^ && + : >new_file && + git add new_file && + git commit --amend && + git show --stat HEAD && + change=$(last_shelve) && + git p4 submit -M --update-shelve $change --commit HEAD + ) && + ( + cd "$cli" && + change=$(last_shelve) && + echo change=$change && + p4 unshelve -s $change && + p4 submit -d "Testing update-shelve" && + test_path_is_file copy_of_file && + test_path_is_file moved/file_to_move && + test_path_is_missing file_to_move && + test_path_is_file new_file && + echo "unshelved and submitted change $change" && + p4 changes moved/file_to_move | grep "Testing update-shelve" && + p4 changes copy_of_file | grep "Testing update-shelve" + ) ' test_done diff --git a/t/t9808-git-p4-chdir.sh b/t/t9808-git-p4-chdir.sh index 11d2b51..58a9b3b 100755 --- a/t/t9808-git-p4-chdir.sh +++ b/t/t9808-git-p4-chdir.sh @@ -83,8 +83,4 @@ test_expect_success SYMLINKS 'p4 client root symlink should stay symbolic' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9809-git-p4-client-view.sh b/t/t9809-git-p4-client-view.sh index 897b3c3..9c9710d 100755 --- a/t/t9809-git-p4-client-view.sh +++ b/t/t9809-git-p4-client-view.sh @@ -407,7 +407,7 @@ test_expect_success 'reinit depot' ' ' # -# What happens when two files of the same name are overlayed together? +# What happens when two files of the same name are overlaid together? # The last-listed file should take preference. # # //depot @@ -836,8 +836,4 @@ test_expect_success 'quotes on both sides' ' git_verify "cdir 1/file11" "cdir 1/file12" ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh index cc53deb..e383688 100755 --- a/t/t9810-git-p4-rcs.sh +++ b/t/t9810-git-p4-rcs.sh @@ -294,7 +294,6 @@ test_expect_success 'cope with rcs keyword file deletion' ' echo "\$Revision\$" >kwdelfile.c && p4 add -t ktext kwdelfile.c && p4 submit -d "Add file to be deleted" && - cat kwdelfile.c && grep 1 kwdelfile.c ) && git p4 clone --dest="$git" //depot && @@ -360,8 +359,4 @@ test_expect_failure 'Add keywords in git which do not match the default p4 value ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9811-git-p4-label-import.sh b/t/t9811-git-p4-label-import.sh index 602b0a5..c1446f2 100755 --- a/t/t9811-git-p4-label-import.sh +++ b/t/t9811-git-p4-label-import.sh @@ -191,7 +191,7 @@ test_expect_success 'tag that cannot be exported' ' ( cd "$cli" && p4 sync ... && - !(p4 labels | grep GIT_TAG_ON_A_BRANCH) + ! p4 labels | grep GIT_TAG_ON_A_BRANCH ) ' @@ -259,9 +259,4 @@ test_expect_success 'importing labels with missing revisions' ' ) ' - -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh index 0206771..254a7c2 100755 --- a/t/t9812-git-p4-wildcards.sh +++ b/t/t9812-git-p4-wildcards.sh @@ -211,8 +211,4 @@ test_expect_success 'wildcard files requiring keyword scrub' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index 783c6ad..fd018c8 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -138,8 +138,4 @@ test_expect_success 'not preserving user with mixed authorship' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index 60baa06..468767c 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -242,8 +242,4 @@ test_expect_success P4D_HAVE_CONFIGURABLE_RUN_MOVE_ALLOW \ ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9815-git-p4-submit-fail.sh b/t/t9815-git-p4-submit-fail.sh index eaf03a6..9779dc0 100755 --- a/t/t9815-git-p4-submit-fail.sh +++ b/t/t9815-git-p4-submit-fail.sh @@ -422,8 +422,4 @@ test_expect_success 'cleanup chmod after submit cancel' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9816-git-p4-locked.sh b/t/t9816-git-p4-locked.sh index d048bd3..9328410 100755 --- a/t/t9816-git-p4-locked.sh +++ b/t/t9816-git-p4-locked.sh @@ -138,8 +138,4 @@ test_expect_failure 'move with lock taken' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9817-git-p4-exclude.sh b/t/t9817-git-p4-exclude.sh index aac568e..ec3d937 100755 --- a/t/t9817-git-p4-exclude.sh +++ b/t/t9817-git-p4-exclude.sh @@ -22,7 +22,9 @@ test_expect_success 'create exclude repo' ' mkdir -p wanted discard && echo wanted >wanted/foo && echo discard >discard/foo && - p4 add wanted/foo discard/foo && + echo discard_file >discard_file && + echo discard_file_not >discard_file_not && + p4 add wanted/foo discard/foo discard_file discard_file_not && p4 submit -d "initial revision" ) ' @@ -33,7 +35,9 @@ test_expect_success 'check the repo was created correctly' ' ( cd "$git" && test_path_is_file wanted/foo && - test_path_is_file discard/foo + test_path_is_file discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not ) ' @@ -43,7 +47,21 @@ test_expect_success 'clone, excluding part of repo' ' ( cd "$git" && test_path_is_file wanted/foo && - test_path_is_missing discard/foo + test_path_is_missing discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not + ) +' + +test_expect_success 'clone, excluding single file, no trailing /' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard_file --dest="$git" //depot/...@all && + ( + cd "$git" && + test_path_is_file wanted/foo && + test_path_is_file discard/foo && + test_path_is_missing discard_file && + test_path_is_file discard_file_not ) ' @@ -52,20 +70,39 @@ test_expect_success 'clone, then sync with exclude' ' git p4 clone -//depot/discard/... --dest="$git" //depot/...@all && ( cd "$cli" && - p4 edit wanted/foo discard/foo && + p4 edit wanted/foo discard/foo discard_file_not && date >>wanted/foo && date >>discard/foo && + date >>discard_file_not && p4 submit -d "updating" && cd "$git" && git p4 sync -//depot/discard/... && test_path_is_file wanted/foo && - test_path_is_missing discard/foo + test_path_is_missing discard/foo && + test_path_is_file discard_file && + test_path_is_file discard_file_not ) ' -test_expect_success 'kill p4d' ' - kill_p4d +test_expect_success 'clone, then sync with exclude, no trailing /' ' + test_when_finished cleanup_git && + git p4 clone -//depot/discard/... -//depot/discard_file --dest="$git" //depot/...@all && + ( + cd "$cli" && + p4 edit wanted/foo discard/foo discard_file_not && + date >>wanted/foo && + date >>discard/foo && + date >>discard_file_not && + p4 submit -d "updating" && + + cd "$git" && + git p4 sync -//depot/discard/... -//depot/discard_file && + test_path_is_file wanted/foo && + test_path_is_missing discard/foo && + test_path_is_missing discard_file && + test_path_is_file discard_file_not + ) ' test_done diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh index ce7cb22..0db7ab9 100755 --- a/t/t9818-git-p4-block.sh +++ b/t/t9818-git-p4-block.sh @@ -146,8 +146,4 @@ test_expect_success 'Clone repo with self-sizing block size' ' test_line_count \> 10 log ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9819-git-p4-case-folding.sh b/t/t9819-git-p4-case-folding.sh index d808c00..600ce1e 100755 --- a/t/t9819-git-p4-case-folding.sh +++ b/t/t9819-git-p4-case-folding.sh @@ -53,8 +53,4 @@ test_expect_failure 'Clone UC repo with lc name' ' test_must_fail git p4 clone //depot/uc/... ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9820-git-p4-editor-handling.sh b/t/t9820-git-p4-editor-handling.sh index 3c22f74..fa1bba1 100755 --- a/t/t9820-git-p4-editor-handling.sh +++ b/t/t9820-git-p4-editor-handling.sh @@ -31,8 +31,4 @@ test_expect_success 'EDITOR with options' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9821-git-p4-path-variations.sh b/t/t9821-git-p4-path-variations.sh index 81e46ac..ef80f16 100755 --- a/t/t9821-git-p4-path-variations.sh +++ b/t/t9821-git-p4-path-variations.sh @@ -193,8 +193,4 @@ test_expect_success 'Add a new file and clone path with new file (ignorecase)' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9822-git-p4-path-encoding.sh b/t/t9822-git-p4-path-encoding.sh index c78477c..572d395 100755 --- a/t/t9822-git-p4-path-encoding.sh +++ b/t/t9822-git-p4-path-encoding.sh @@ -7,6 +7,13 @@ test_description='Clone repositories with non ASCII paths' UTF8_ESCAPED="a-\303\244_o-\303\266_u-\303\274.txt" ISO8859_ESCAPED="a-\344_o-\366_u-\374.txt" +ISO8859="$(printf "$ISO8859_ESCAPED")" && +echo content123 >"$ISO8859" && +rm "$ISO8859" || { + skip_all="fs does not accept ISO-8859-1 filenames" + test_done +} + test_expect_success 'start p4d' ' start_p4d ' @@ -67,8 +74,4 @@ test_expect_success 'Delete iso8859-1 encoded paths and clone' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9823-git-p4-mock-lfs.sh b/t/t9823-git-p4-mock-lfs.sh index 1f2dc36..88b76dc 100755 --- a/t/t9823-git-p4-mock-lfs.sh +++ b/t/t9823-git-p4-mock-lfs.sh @@ -185,8 +185,4 @@ test_expect_success 'Run git p4 submit in repo configured with large file system ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9824-git-p4-git-lfs.sh b/t/t9824-git-p4-git-lfs.sh index ed80ca8..a28dbbd 100755 --- a/t/t9824-git-p4-git-lfs.sh +++ b/t/t9824-git-p4-git-lfs.sh @@ -287,8 +287,4 @@ test_expect_success 'Add big files to repo and store files in LFS based on compr ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9825-git-p4-handle-utf16-without-bom.sh b/t/t9825-git-p4-handle-utf16-without-bom.sh index 1551845..f049ff8 100755 --- a/t/t9825-git-p4-handle-utf16-without-bom.sh +++ b/t/t9825-git-p4-handle-utf16-without-bom.sh @@ -43,8 +43,4 @@ test_expect_failure 'clone depot with invalid UTF-16 file in non-verbose mode' ' git p4 clone --dest="$git" //depot ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9826-git-p4-keep-empty-commits.sh b/t/t9826-git-p4-keep-empty-commits.sh index fa8b9da..fd64afe 100755 --- a/t/t9826-git-p4-keep-empty-commits.sh +++ b/t/t9826-git-p4-keep-empty-commits.sh @@ -127,8 +127,4 @@ test_expect_success 'Clone repo subdir with all history' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9827-git-p4-change-filetype.sh b/t/t9827-git-p4-change-filetype.sh index 7433998..d3670bd 100755 --- a/t/t9827-git-p4-change-filetype.sh +++ b/t/t9827-git-p4-change-filetype.sh @@ -59,8 +59,4 @@ test_expect_success SYMLINKS 'change symbolic link to file' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9828-git-p4-map-user.sh b/t/t9828-git-p4-map-user.sh index e20395c..ca6c294 100755 --- a/t/t9828-git-p4-map-user.sh +++ b/t/t9828-git-p4-map-user.sh @@ -54,8 +54,4 @@ test_expect_success 'Clone repo root path with all history' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9829-git-p4-jobs.sh b/t/t9829-git-p4-jobs.sh index 971aeee..88cfb1f 100755 --- a/t/t9829-git-p4-jobs.sh +++ b/t/t9829-git-p4-jobs.sh @@ -92,8 +92,4 @@ test_expect_success 'check log message of changelist with more jobs' ' ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9830-git-p4-symlink-dir.sh b/t/t9830-git-p4-symlink-dir.sh index 2ad1b08..3fb6960 100755 --- a/t/t9830-git-p4-symlink-dir.sh +++ b/t/t9830-git-p4-symlink-dir.sh @@ -36,8 +36,4 @@ test_expect_success 'symlinked directory' ' ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9831-git-p4-triggers.sh b/t/t9831-git-p4-triggers.sh index be44c97..d743ca3 100755 --- a/t/t9831-git-p4-triggers.sh +++ b/t/t9831-git-p4-triggers.sh @@ -96,8 +96,4 @@ test_expect_success 'submit description with extra info lines from verbose p4 ch ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' - test_done diff --git a/t/t9832-unshelve.sh b/t/t9832-unshelve.sh index 41c09f1..e9276c4 100755 --- a/t/t9832-unshelve.sh +++ b/t/t9832-unshelve.sh @@ -22,7 +22,10 @@ test_expect_success 'init depot' ' : >file_to_move && p4 add file_to_delete && p4 add file_to_move && - p4 submit -d "add files to delete" + p4 submit -d "add files to delete" && + echo file_to_integrate >file_to_integrate && + p4 add file_to_integrate && + p4 submit -d "add file to integrate" ) ' @@ -40,6 +43,7 @@ test_expect_success 'create shelved changelist' ' p4 delete file_to_delete && p4 edit file_to_move && p4 move file_to_move moved_file && + p4 integrate file_to_integrate integrated_file && p4 opened && p4 shelve -i <<EOF Change: new @@ -53,6 +57,7 @@ Files: //depot/file_to_delete //depot/file_to_move //depot/moved_file + //depot/integrated_file EOF ) && @@ -65,6 +70,7 @@ EOF test_path_is_file file2 && test_cmp file1 "$cli"/file1 && test_cmp file2 "$cli"/file2 && + test_cmp file_to_integrate "$cli"/integrated_file && test_path_is_missing file_to_delete && test_path_is_missing file_to_move && test_path_is_file moved_file @@ -174,8 +180,5 @@ test_expect_success 'unshelve specifying the origin' ' test_path_is_file file_to_shelve ) ' -test_expect_success 'kill p4d' ' - kill_p4d -' test_done diff --git a/t/t9833-errors.sh b/t/t9833-errors.sh index 277d347..e22369c 100755 --- a/t/t9833-errors.sh +++ b/t/t9833-errors.sh @@ -45,36 +45,4 @@ test_expect_success 'ticket logged out' ' ) ' -test_expect_success 'create group with short ticket expiry' ' - P4TICKETS="$cli/tickets" && - echo "newpassword" | p4 login && - p4_add_user short_expiry_user && - p4 -u short_expiry_user passwd -P password && - p4 group -i <<-EOF && - Group: testgroup - Timeout: 3 - Users: short_expiry_user - EOF - - p4 users | grep short_expiry_user -' - -test_expect_success 'git operation with expired ticket' ' - P4TICKETS="$cli/tickets" && - P4USER=short_expiry_user && - echo "password" | p4 login && - ( - cd "$git" && - git p4 sync && - sleep 5 && - test_must_fail git p4 sync 2>errmsg && - grep "failure accessing depot" errmsg - ) -' - -test_expect_success 'kill p4d' ' - kill_p4d -' - - test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 137fdc9..5505e5a 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -28,10 +28,10 @@ complete () # # (2) A test makes sure that common subcommands are included in the # completion for "git <TAB>", and a plumbing is excluded. "add", -# "filter-branch" and "ls-files" are listed for this. +# "rebase" and "ls-files" are listed for this. -GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr filter-branch ls-files' -GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout filter-branch' +GIT_TESTING_ALL_COMMAND_LIST='add checkout check-attr rebase ls-files' +GIT_TESTING_PORCELAIN_COMMAND_LIST='add checkout rebase' . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" @@ -378,7 +378,7 @@ test_expect_success '__gitdir - finds repo' ' ' -test_expect_success '__gitdir - returns error when cant find repo' ' +test_expect_success '__gitdir - returns error when cannot find repo' ' ( __git_dir="non-existing" && test_must_fail __gitdir >"$actual" @@ -945,7 +945,7 @@ test_expect_success 'setup for filtering matching refs' ' rm -f .git/FETCH_HEAD ' -test_expect_success '__git_refs - dont filter refs unless told so' ' +test_expect_success '__git_refs - do not filter refs unless told so' ' cat >expected <<-EOF && HEAD master @@ -1257,7 +1257,7 @@ test_path_completion () # In the following tests calling this function we only # care about how __git_complete_index_file() deals with # unusual characters in path names. By requesting only - # untracked files we dont have to bother adding any + # untracked files we do not have to bother adding any # paths to the index in those tests. __git_complete_index_file --others && print_comp @@ -1363,6 +1363,63 @@ test_expect_success 'teardown after path completion tests' ' BS\\dir '$'separators\034in\035dir'' ' +test_expect_success '__git_find_on_cmdline - single match' ' + echo list >expect && + ( + words=(git command --opt list) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - multiple matches' ' + echo remove >expect && + ( + words=(git command -o --opt remove list add) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - no match' ' + ( + words=(git command --opt branch) && + cword=${#words[@]} && + __git_find_on_cmdline "add list remove" >actual + ) && + test_must_be_empty actual +' + +test_expect_success '__git_find_on_cmdline - single match with index' ' + echo "3 list" >expect && + ( + words=(git command --opt list) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - multiple matches with index' ' + echo "4 remove" >expect && + ( + words=(git command -o --opt remove list add) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_cmp expect actual +' + +test_expect_success '__git_find_on_cmdline - no match with index' ' + ( + words=(git command --opt branch) && + cword=${#words[@]} && + __git_find_on_cmdline --show-idx "add list remove" >actual + ) && + test_must_be_empty actual +' test_expect_success '__git_get_config_variables' ' cat >expect <<-EOF && @@ -1392,12 +1449,12 @@ test_expect_success 'basic' ' # built-in grep -q "^add \$" out && # script - grep -q "^filter-branch \$" out && + grep -q "^rebase \$" out && # plumbing ! grep -q "^ls-files \$" out && - run_completion "git f" && - ! grep -q -v "^f" out + run_completion "git r" && + ! grep -q -v "^r" out ' test_expect_success 'double dash "git" itself' ' @@ -1434,8 +1491,12 @@ test_expect_success 'double dash "git checkout"' ' --ignore-other-worktrees Z --recurse-submodules Z --progress Z - --no-quiet Z + --guess Z + --no-guess Z --no-... Z + --overlay Z + --pathspec-file-nul Z + --pathspec-from-file=Z EOF ' @@ -1482,6 +1543,12 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_success 'completion.commands removes multiple commands' ' + test_config completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config >out && + ! grep -E "^(cherry|mergetool)$" out +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 && @@ -1515,8 +1582,8 @@ test_expect_success 'show completes all refs' ' test_expect_success '<ref>: completes paths' ' test_completion "git show mytag:f" <<-\EOF - file1 Z - file2 Z + file1Z + file2Z EOF ' @@ -1525,7 +1592,7 @@ test_expect_success 'complete tree filename with spaces' ' git add "name with spaces" && git commit -m spaces && test_completion "git show HEAD:nam" <<-\EOF - name with spaces Z + name with spacesZ EOF ' @@ -1534,13 +1601,16 @@ test_expect_success 'complete tree filename with metacharacters' ' git add "name with \${meta}" && git commit -m meta && test_completion "git show HEAD:nam" <<-\EOF - name with ${meta} Z - name with spaces Z + name with ${meta}Z + name with spacesZ EOF ' test_expect_success PERL 'send-email' ' - test_completion "git send-email --cov" "--cover-letter " && + test_completion "git send-email --cov" <<-\EOF && + --cover-from-description=Z + --cover-letter Z + EOF test_completion "git send-email ma" "master " ' @@ -1690,6 +1760,69 @@ do ' done +test_expect_success 'git config - section' ' + test_completion "git config br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git config - variable name' ' + test_completion "git config log.d" <<-\EOF + log.date Z + log.decorate Z + EOF +' + +test_expect_success 'git config - value' ' + test_completion "git config color.pager " <<-\EOF + false Z + true Z + EOF +' + +test_expect_success 'git -c - section' ' + test_completion "git -c br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git -c - variable name' ' + test_completion "git -c log.d" <<-\EOF + log.date=Z + log.decorate=Z + EOF +' + +test_expect_success 'git -c - value' ' + test_completion "git -c color.pager=" <<-\EOF + false Z + true Z + EOF +' + +test_expect_success 'git clone --config= - section' ' + test_completion "git clone --config=br" <<-\EOF + branch.Z + browser.Z + EOF +' + +test_expect_success 'git clone --config= - variable name' ' + test_completion "git clone --config=log.d" <<-\EOF + log.date=Z + log.decorate=Z + EOF +' + +test_expect_success 'git clone --config= - value' ' + test_completion "git clone --config=color.pager=" <<-\EOF + false Z + true Z + EOF +' + test_expect_success 'sourcing the completion script clears cached commands' ' __git_compute_all_commands && verbose test -n "$__git_all_commands" && @@ -1698,7 +1831,7 @@ test_expect_success 'sourcing the completion script clears cached commands' ' ' test_expect_success 'sourcing the completion script clears cached merge strategies' ' - GIT_TEST_GETTEXT_POISON= && + GIT_TEST_GETTEXT_POISON=false && __git_compute_merge_strategies && verbose test -n "$__git_merge_strategies" && . "$GIT_BUILD_DIR/contrib/completion/git-completion.bash" && diff --git a/t/t9903-bash-prompt.sh b/t/t9903-bash-prompt.sh index 81a5179..ab5da2c 100755 --- a/t/t9903-bash-prompt.sh +++ b/t/t9903-bash-prompt.sh @@ -163,7 +163,7 @@ test_expect_success 'prompt - inside bare repository' ' ' test_expect_success 'prompt - interactive rebase' ' - printf " (b1|REBASE-i 2/3)" >expected && + printf " (b1|REBASE 2/3)" >expected && write_script fake_editor.sh <<-\EOF && echo "exec echo" >"$1" echo "edit $(git log -1 --format="%h")" >>"$1" @@ -180,7 +180,7 @@ test_expect_success 'prompt - interactive rebase' ' ' test_expect_success 'prompt - rebase merge' ' - printf " (b2|REBASE-m 1/3)" >expected && + printf " (b2|REBASE 1/3)" >expected && git checkout b2 && test_when_finished "git checkout master" && test_must_fail git rebase --merge b1 b2 && @@ -189,11 +189,11 @@ test_expect_success 'prompt - rebase merge' ' test_cmp expected "$actual" ' -test_expect_success 'prompt - rebase' ' +test_expect_success 'prompt - rebase am' ' printf " (b2|REBASE 1/3)" >expected && git checkout b2 && test_when_finished "git checkout master" && - test_must_fail git rebase b1 b2 && + test_must_fail git rebase --apply b1 b2 && test_when_finished "git rebase --abort" && __git_ps1 >"$actual" && test_cmp expected "$actual" @@ -211,8 +211,24 @@ test_expect_success 'prompt - merge' ' test_expect_success 'prompt - cherry-pick' ' printf " (master|CHERRY-PICKING)" >expected && - test_must_fail git cherry-pick b1 && - test_when_finished "git reset --hard" && + test_must_fail git cherry-pick b1 b1^ && + test_when_finished "git cherry-pick --abort" && + __git_ps1 >"$actual" && + test_cmp expected "$actual" && + git reset --merge && + test_must_fail git rev-parse CHERRY_PICK_HEAD && + __git_ps1 >"$actual" && + test_cmp expected "$actual" +' + +test_expect_success 'prompt - revert' ' + printf " (master|REVERTING)" >expected && + test_must_fail git revert b1^ b1 && + test_when_finished "git revert --abort" && + __git_ps1 >"$actual" && + test_cmp expected "$actual" && + git reset --merge && + test_must_fail git rev-parse REVERT_HEAD && __git_ps1 >"$actual" && test_cmp expected "$actual" ' diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 6b3bbf9..352c213 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -116,6 +116,13 @@ remove_cr () { tr '\015' Q | sed -e 's/Q$//' } +# Generate an output of $1 bytes of all zeroes (NULs, not ASCII zeroes). +# If $1 is 'infinity', output forever or until the receiving pipe stops reading, +# whichever comes first. +generate_zero_bytes () { + test-tool genzeros "$@" +} + # In some bourne shell implementations, the "unset" builtin returns # nonzero status when a variable to be unset was not set in the first # place. @@ -221,9 +228,134 @@ test_commit () { # can be a tag pointing to the commit-to-merge. test_merge () { + label="$1" && + shift && test_tick && - git merge -m "$1" "$2" && - git tag "$1" + git merge -m "$label" "$@" && + git tag "$label" +} + +# Efficiently create <nr> commits, each with a unique number (from 1 to <nr> +# by default) in the commit message. +# +# Usage: test_commit_bulk [options] <nr> +# -C <dir>: +# Run all git commands in directory <dir> +# --ref=<n>: +# ref on which to create commits (default: HEAD) +# --start=<n>: +# number commit messages from <n> (default: 1) +# --message=<msg>: +# use <msg> as the commit mesasge (default: "commit %s") +# --filename=<fn>: +# modify <fn> in each commit (default: %s.t) +# --contents=<string>: +# place <string> in each file (default: "content %s") +# --id=<string>: +# shorthand to use <string> and %s in message, filename, and contents +# +# The message, filename, and contents strings are evaluated by printf, with the +# first "%s" replaced by the current commit number. So you can do: +# +# test_commit_bulk --filename=file --contents="modification %s" +# +# to have every commit touch the same file, but with unique content. +# +test_commit_bulk () { + tmpfile=.bulk-commit.input + indir=. + ref=HEAD + n=1 + message='commit %s' + filename='%s.t' + contents='content %s' + while test $# -gt 0 + do + case "$1" in + -C) + indir=$2 + shift + ;; + --ref=*) + ref=${1#--*=} + ;; + --start=*) + n=${1#--*=} + ;; + --message=*) + message=${1#--*=} + ;; + --filename=*) + filename=${1#--*=} + ;; + --contents=*) + contents=${1#--*=} + ;; + --id=*) + message="${1#--*=} %s" + filename="${1#--*=}-%s.t" + contents="${1#--*=} %s" + ;; + -*) + BUG "invalid test_commit_bulk option: $1" + ;; + *) + break + ;; + esac + shift + done + total=$1 + + add_from= + if git -C "$indir" rev-parse --quiet --verify "$ref" + then + add_from=t + fi + + while test "$total" -gt 0 + do + test_tick && + echo "commit $ref" + printf 'author %s <%s> %s\n' \ + "$GIT_AUTHOR_NAME" \ + "$GIT_AUTHOR_EMAIL" \ + "$GIT_AUTHOR_DATE" + printf 'committer %s <%s> %s\n' \ + "$GIT_COMMITTER_NAME" \ + "$GIT_COMMITTER_EMAIL" \ + "$GIT_COMMITTER_DATE" + echo "data <<EOF" + printf "$message\n" $n + echo "EOF" + if test -n "$add_from" + then + echo "from $ref^0" + add_from= + fi + printf "M 644 inline $filename\n" $n + echo "data <<EOF" + printf "$contents\n" $n + echo "EOF" + echo + n=$((n + 1)) + total=$((total - 1)) + done >"$tmpfile" + + git -C "$indir" \ + -c fastimport.unpacklimit=0 \ + fast-import <"$tmpfile" || return 1 + + # This will be left in place on failure, which may aid debugging. + rm -f "$tmpfile" + + # If we updated HEAD, then be nice and update the index and working + # tree, too. + if test "$ref" = "HEAD" + then + git -C "$indir" checkout -f HEAD || return 1 + fi + } # This function helps systems where core.filemode=false is set. @@ -302,6 +434,26 @@ test_unset_prereq () { } test_set_prereq () { + if test -n "$GIT_TEST_FAIL_PREREQS_INTERNAL" + then + case "$1" in + # The "!" case is handled below with + # test_unset_prereq() + !*) + ;; + # (Temporary?) whitelist of things we can't easily + # pretend not to support + SYMLINKS) + ;; + # Inspecting whether GIT_TEST_FAIL_PREREQS is on + # should be unaffected. + FAIL_PREREQS) + ;; + *) + return + esac + fi + case "$1" in !*) test_unset_prereq "${1#!}" @@ -430,7 +582,7 @@ test_expect_failure () { export test_prereq if ! test_skip "$@" then - say >&3 "checking known breakage: $2" + say >&3 "checking known breakage of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" expecting_failure then test_known_broken_ok_ "$1" @@ -450,7 +602,7 @@ test_expect_success () { export test_prereq if ! test_skip "$@" then - say >&3 "expecting success: $2" + say >&3 "expecting success of $TEST_NUMBER.$test_count '$1': $2" if test_run_ "$2" then test_ok_ "$1" @@ -586,6 +738,15 @@ test_dir_is_empty () { fi } +# Check if the file exists and has a size greater than zero +test_file_not_empty () { + if ! test -s "$1" + then + echo "'$1' is not a non-empty file." + false + fi +} + test_path_is_missing () { if test -e "$1" then @@ -851,19 +1012,30 @@ test_must_be_empty () { fi } -# Tests that its two parameters refer to the same revision +# Tests that its two parameters refer to the same revision, or if '!' is +# provided first, that its other two parameters refer to different +# revisions. test_cmp_rev () { + local op='=' wrong_result=different + + if test $# -ge 1 && test "x$1" = 'x!' + then + op='!=' + wrong_result='the same' + shift + fi if test $# != 2 then error "bug in the test script: test_cmp_rev requires two revisions, but got $#" else local r1 r2 r1=$(git rev-parse --verify "$1") && - r2=$(git rev-parse --verify "$2") && - if test "$r1" != "$r2" + r2=$(git rev-parse --verify "$2") || return 1 + + if ! test "$r1" "$op" "$r2" then cat >&4 <<-EOF - error: two revisions point to different objects: + error: two revisions point to $wrong_result objects: '$1': $r1 '$2': $r2 EOF @@ -872,6 +1044,21 @@ test_cmp_rev () { fi } +# Compare paths respecting core.ignoreCase +test_cmp_fspath () { + if test "x$1" = "x$2" + then + return 0 + fi + + if test true != "$(git config --get --type=bool core.ignorecase)" + then + return 1 + fi + + test "x$(echo "$1" | tr A-Z a-z)" = "x$(echo "$2" | tr A-Z a-z)" +} + # Print a sequence of integers in increasing order, either with # two arguments (start and end): # @@ -927,6 +1114,34 @@ test_when_finished () { } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" } +# This function can be used to schedule some commands to be run +# unconditionally at the end of the test script, e.g. to stop a daemon: +# +# test_expect_success 'test git daemon' ' +# git daemon & +# daemon_pid=$! && +# test_atexit 'kill $daemon_pid' && +# hello world +# ' +# +# The commands will be executed before the trash directory is removed, +# i.e. the atexit commands will still be able to access any pidfiles or +# socket files. +# +# Note that these commands will be run even when a test script run +# with '--immediate' fails. Be careful with your atexit commands to +# minimize any changes to the failed state. + +test_atexit () { + # We cannot detect when we are in a subshell in general, but by + # doing so on Bash is better than nothing (the test will + # silently pass on other shells). + test "${BASH_SUBSHELL-0}" = 0 || + error "bug in test script: test_atexit does nothing in a subshell" + test_atexit_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_atexit_cleanup" +} + # Most tests can use the created repository, but some may need to create more. # Usage: test_create_repo <directory> test_create_repo () { @@ -971,62 +1186,48 @@ perl () { command "$PERL_PATH" "$@" 2>&7 } 7>&2 2>&4 -# Is the value one of the various ways to spell a boolean true/false? -test_normalize_bool () { - git -c magic.variable="$1" config --bool magic.variable 2>/dev/null -} - -# Given a variable $1, normalize the value of it to one of "true", -# "false", or "auto" and store the result to it. -# -# test_tristate GIT_TEST_HTTPD +# Given the name of an environment variable with a bool value, normalize +# its value to a 0 (true) or 1 (false or empty string) return code. # -# A variable set to an empty string is set to 'false'. -# A variable set to 'false' or 'auto' keeps its value. -# Anything else is set to 'true'. -# An unset variable defaults to 'auto'. +# test_bool_env GIT_TEST_HTTPD <default-value> # -# The last rule is to allow people to set the variable to an empty -# string and export it to decline testing the particular feature -# for versions both before and after this change. We used to treat -# both unset and empty variable as a signal for "do not test" and -# took any non-empty string as "please test". - -test_tristate () { - if eval "test x\"\${$1+isset}\" = xisset" +# Return with code corresponding to the given default value if the variable +# is unset. +# Abort the test script if either the value of the variable or the default +# are not valid bool values. + +test_bool_env () { + if test $# != 2 then - # explicitly set - eval " - case \"\$$1\" in - '') $1=false ;; - auto) ;; - *) $1=\$(test_normalize_bool \$$1 || echo true) ;; - esac - " - else - eval "$1=auto" + BUG "test_bool_env requires two parameters (variable name and default value)" fi + + git env--helper --type=bool --default="$2" --exit-code "$1" + ret=$? + case $ret in + 0|1) # unset or valid bool value + ;; + *) # invalid bool value or something unexpected + error >&7 "test_bool_env requires bool values both for \$$1 and for the default fallback" + ;; + esac + return $ret } # Exit the test suite, either by skipping all remaining tests or by -# exiting with an error. If "$1" is "auto", we then we assume we were -# opportunistically trying to set up some tests and we skip. If it is -# "true", then we report a failure. +# exiting with an error. If our prerequisite variable $1 falls back +# on a default assume we were opportunistically trying to set up some +# tests and we skip. If it is explicitly "true", then we report a failure. # # The error/skip message should be given by $2. # test_skip_or_die () { - case "$1" in - auto) + if ! test_bool_env "$1" false + then skip_all=$2 test_done - ;; - true) - error "$2" - ;; - *) - error "BUG: test tristate is '$1' (real error: $2)" - esac + fi + error "$2" } # The following mingw_* functions obey POSIX shell syntax, but are actually @@ -1195,6 +1396,12 @@ depacketize () { ' } +# Converts base-16 data into base-8. The output is given as a sequence of +# escaped octals, suitable for consumption by 'printf'. +hex2oct () { + perl -ne 'printf "\\%03o", hex for /../g' +} + # Set the hash algorithm in use to $1. Only useful when testing the testsuite. test_set_hash () { test_hash_algo="$1" @@ -1263,3 +1470,76 @@ test_oid () { fi && eval "printf '%s' \"\${$var}\"" } + +# Insert a slash into an object ID so it can be used to reference a location +# under ".git/objects". For example, "deadbeef..." becomes "de/adbeef..". +test_oid_to_path () { + local basename=${1#??} + echo "${1%$basename}/$basename" +} + +# Choose a port number based on the test script's number and store it in +# the given variable name, unless that variable already contains a number. +test_set_port () { + local var=$1 port + + if test $# -ne 1 || test -z "$var" + then + BUG "test_set_port requires a variable name" + fi + + eval port=\$$var + case "$port" in + "") + # No port is set in the given env var, use the test + # number as port number instead. + # Remove not only the leading 't', but all leading zeros + # as well, so the arithmetic below won't (mis)interpret + # a test number like '0123' as an octal value. + port=${this_test#${this_test%%[1-9]*}} + if test "${port:-0}" -lt 1024 + then + # root-only port, use a larger one instead. + port=$(($port + 10000)) + fi + ;; + *[!0-9]*|0*) + error >&7 "invalid port number: $port" + ;; + *) + # The user has specified the port. + ;; + esac + + # Make sure that parallel '--stress' test jobs get different + # ports. + port=$(($port + ${GIT_TEST_STRESS_JOB_NR:-0})) + eval $var=$port +} + +# Compare a file containing rev-list bitmap traversal output to its non-bitmap +# counterpart. You can't just use test_cmp for this, because the two produce +# subtly different output: +# +# - regular output is in traversal order, whereas bitmap is split by type, +# with non-packed objects at the end +# +# - regular output has a space and the pathname appended to non-commit +# objects; bitmap output omits this +# +# This function normalizes and compares the two. The second file should +# always be the bitmap output. +test_bitmap_traversal () { + if test "$1" = "--no-confirm-bitmaps" + then + shift + elif cmp "$1" "$2" + then + echo >&2 "identical raw outputs; are you sure bitmaps were used?" + return 1 + fi && + cut -d' ' -f1 "$1" | sort >"$1.normalized" && + sort "$2" >"$2.normalized" && + test_cmp "$1.normalized" "$2.normalized" && + rm -f "$1.normalized" "$2.normalized" +} diff --git a/t/test-lib.sh b/t/test-lib.sh index 0f1faa2..0ea1e5a 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -57,6 +57,13 @@ fi . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS export PERL_PATH SHELL_PATH +# Disallow the use of abbreviated options in the test suite by default +if test -z "${GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS}" +then + GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true + export GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS +fi + ################################################################ # It appears that people try to run tests without building... "${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null @@ -71,19 +78,250 @@ then exit 1 fi +# Parse options while taking care to leave $@ intact, so we will still +# have all the original command line options when executing the test +# script again for '--tee' and '--verbose-log' below. +store_arg_to= +prev_opt= +for opt +do + if test -n "$store_arg_to" + then + eval $store_arg_to=\$opt + store_arg_to= + prev_opt= + continue + fi + + case "$opt" in + -d|--d|--de|--deb|--debu|--debug) + debug=t ;; + -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) + immediate=t ;; + -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) + GIT_TEST_LONG=t; export GIT_TEST_LONG ;; + -r) + store_arg_to=run_list + ;; + --run=*) + run_list=${opt#--*=} ;; + -h|--h|--he|--hel|--help) + help=t ;; + -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) + verbose=t ;; + --verbose-only=*) + verbose_only=${opt#--*=} + ;; + -q|--q|--qu|--qui|--quie|--quiet) + # Ignore --quiet under a TAP::Harness. Saying how many tests + # passed without the ok/not ok details is always an error. + test -z "$HARNESS_ACTIVE" && quiet=t ;; + --with-dashes) + with_dashes=t ;; + --no-bin-wrappers) + no_bin_wrappers=t ;; + --no-color) + color= ;; + --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) + valgrind=memcheck + tee=t + ;; + --valgrind=*) + valgrind=${opt#--*=} + tee=t + ;; + --valgrind-only=*) + valgrind_only=${opt#--*=} + tee=t + ;; + --tee) + tee=t ;; + --root=*) + root=${opt#--*=} ;; + --chain-lint) + GIT_TEST_CHAIN_LINT=1 ;; + --no-chain-lint) + GIT_TEST_CHAIN_LINT=0 ;; + -x) + trace=t ;; + -V|--verbose-log) + verbose_log=t + tee=t + ;; + --write-junit-xml) + write_junit_xml=t + ;; + --stress) + stress=t ;; + --stress=*) + echo "error: --stress does not accept an argument: '$opt'" >&2 + echo "did you mean --stress-jobs=${opt#*=} or --stress-limit=${opt#*=}?" >&2 + exit 1 + ;; + --stress-jobs=*) + stress=t; + stress=${opt#--*=} + case "$stress" in + *[!0-9]*|0*|"") + echo "error: --stress-jobs=<N> requires the number of jobs to run" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + --stress-limit=*) + stress=t; + stress_limit=${opt#--*=} + case "$stress_limit" in + *[!0-9]*|0*|"") + echo "error: --stress-limit=<N> requires the number of repetitions" >&2 + exit 1 + ;; + *) # Good. + ;; + esac + ;; + *) + echo "error: unknown test option '$opt'" >&2; exit 1 ;; + esac + + prev_opt=$opt +done +if test -n "$store_arg_to" +then + echo "error: $prev_opt requires an argument" >&2 + exit 1 +fi + +if test -n "$valgrind_only" +then + test -z "$valgrind" && valgrind=memcheck + test -z "$verbose" && verbose_only="$valgrind_only" +elif test -n "$valgrind" +then + test -z "$verbose_log" && verbose=t +fi + +if test -n "$stress" +then + verbose=t + trace=t + immediate=t +fi + +TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}" +TEST_NAME="$(basename "$0" .sh)" +TEST_NUMBER="${TEST_NAME%%-*}" +TEST_NUMBER="${TEST_NUMBER#t}" +TEST_RESULTS_DIR="$TEST_OUTPUT_DIRECTORY/test-results" +TEST_RESULTS_BASE="$TEST_RESULTS_DIR/$TEST_NAME$TEST_STRESS_JOB_SFX" +TRASH_DIRECTORY="trash directory.$TEST_NAME$TEST_STRESS_JOB_SFX" +test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" +case "$TRASH_DIRECTORY" in +/*) ;; # absolute path is good + *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; +esac + +# If --stress was passed, run this test repeatedly in several parallel loops. +if test "$GIT_TEST_STRESS_STARTED" = "done" +then + : # Don't stress test again. +elif test -n "$stress" +then + if test "$stress" != t + then + job_count=$stress + elif test -n "$GIT_TEST_STRESS_LOAD" + then + job_count="$GIT_TEST_STRESS_LOAD" + elif job_count=$(getconf _NPROCESSORS_ONLN 2>/dev/null) && + test -n "$job_count" + then + job_count=$((2 * $job_count)) + else + job_count=8 + fi + + mkdir -p "$TEST_RESULTS_DIR" + stressfail="$TEST_RESULTS_BASE.stress-failed" + rm -f "$stressfail" + + stress_exit=0 + trap ' + kill $job_pids 2>/dev/null + wait + stress_exit=1 + ' TERM INT HUP + + job_pids= + job_nr=0 + while test $job_nr -lt "$job_count" + do + ( + GIT_TEST_STRESS_STARTED=done + GIT_TEST_STRESS_JOB_NR=$job_nr + export GIT_TEST_STRESS_STARTED GIT_TEST_STRESS_JOB_NR + + trap ' + kill $test_pid 2>/dev/null + wait + exit 1 + ' TERM INT + + cnt=1 + while ! test -e "$stressfail" && + { test -z "$stress_limit" || + test $cnt -le $stress_limit ; } + do + $TEST_SHELL_PATH "$0" "$@" >"$TEST_RESULTS_BASE.stress-$job_nr.out" 2>&1 & + test_pid=$! + + if wait $test_pid + then + printf "OK %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + else + echo $GIT_TEST_STRESS_JOB_NR >>"$stressfail" + printf "FAIL %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt + fi + cnt=$(($cnt + 1)) + done + ) & + job_pids="$job_pids $!" + job_nr=$(($job_nr + 1)) + done + + wait + + if test -f "$stressfail" + then + stress_exit=1 + echo "Log(s) of failed test run(s):" + for failed_job_nr in $(sort -n "$stressfail") + do + echo "Contents of '$TEST_RESULTS_BASE.stress-$failed_job_nr.out':" + cat "$TEST_RESULTS_BASE.stress-$failed_job_nr.out" + done + rm -rf "$TRASH_DIRECTORY.stress-failed" + # Move the last one. + mv "$TRASH_DIRECTORY.stress-$failed_job_nr" "$TRASH_DIRECTORY.stress-failed" + fi + + exit $stress_exit +fi + # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. -case "$GIT_TEST_TEE_STARTED, $* " in -done,*) - # do not redirect again - ;; -*' --tee '*|*' --va'*|*' -V '*|*' --verbose-log '*) - mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results" - BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)" +if test "$GIT_TEST_TEE_STARTED" = "done" +then + : # do not redirect again +elif test -n "$tee" +then + mkdir -p "$TEST_RESULTS_DIR" # Make this filename available to the sub-process in case it is using # --verbose-log. - GIT_TEST_TEE_OUTPUT_FILE=$BASE.out + GIT_TEST_TEE_OUTPUT_FILE=$TEST_RESULTS_BASE.out export GIT_TEST_TEE_OUTPUT_FILE # Truncate before calling "tee -a" to get rid of the results @@ -91,11 +329,38 @@ done,*) >"$GIT_TEST_TEE_OUTPUT_FILE" (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1; - echo $? >"$BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" - test "$(cat "$BASE.exit")" = 0 + echo $? >"$TEST_RESULTS_BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" + test "$(cat "$TEST_RESULTS_BASE.exit")" = 0 exit - ;; -esac +fi + +if test -n "$trace" && test -n "$test_untraceable" +then + # '-x' tracing requested, but this test script can't be reliably + # traced, unless it is run with a Bash version supporting + # BASH_XTRACEFD (introduced in Bash v4.1). + # + # Perform this version check _after_ the test script was + # potentially re-executed with $TEST_SHELL_PATH for '--tee' or + # '--verbose-log', so the right shell is checked and the + # warning is issued only once. + if test -n "$BASH_VERSION" && eval ' + test ${BASH_VERSINFO[0]} -gt 4 || { + test ${BASH_VERSINFO[0]} -eq 4 && + test ${BASH_VERSINFO[1]} -ge 1 + } + ' + then + : Executed by a Bash version supporting BASH_XTRACEFD. Good. + else + echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" + trace= + fi +fi +if test -n "$trace" && test -z "$verbose_log" +then + verbose=t +fi # For repeatability, reset the environment to known value. # TERM is sanitized below, after saving color control sequences. @@ -139,9 +404,13 @@ unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e ' unset XDG_CACHE_HOME unset XDG_CONFIG_HOME unset GITPERLLIB -GIT_AUTHOR_EMAIL=author@example.com +TEST_AUTHOR_LOCALNAME=author +TEST_AUTHOR_DOMAIN=example.com +GIT_AUTHOR_EMAIL=${TEST_AUTHOR_LOCALNAME}@${TEST_AUTHOR_DOMAIN} GIT_AUTHOR_NAME='A U Thor' -GIT_COMMITTER_EMAIL=committer@example.com +TEST_COMMITTER_LOCALNAME=committer +TEST_COMMITTER_DOMAIN=example.com +GIT_COMMITTER_EMAIL=${TEST_COMMITTER_LOCALNAME}@${TEST_COMMITTER_DOMAIN} GIT_COMMITTER_NAME='C O Mitter' GIT_MERGE_VERBOSITY=5 GIT_MERGE_AUTOEDIT=no @@ -193,7 +462,7 @@ fi # Add libc MALLOC and MALLOC_PERTURB test # only if we are not executing the test with valgrind -if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null || +if test -n "$valgrind" || test -n "$TEST_NO_MALLOC_CHECK" then setup_malloc_check () { @@ -244,6 +513,9 @@ EMPTY_BLOB=e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 LF=' ' +# Single quote +SQ=\' + # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores # when case-folding filenames u200c=$(printf '\342\200\214') @@ -264,100 +536,6 @@ test "x$TERM" != "xdumb" && ( ) && color=t -while test "$#" -ne 0 -do - case "$1" in - -d|--d|--de|--deb|--debu|--debug) - debug=t; shift ;; - -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) - immediate=t; shift ;; - -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) - GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;; - -r) - shift; test "$#" -ne 0 || { - echo 'error: -r requires an argument' >&2; - exit 1; - } - run_list=$1; shift ;; - --run=*) - run_list=${1#--*=}; shift ;; - -h|--h|--he|--hel|--help) - help=t; shift ;; - -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) - verbose=t; shift ;; - --verbose-only=*) - verbose_only=${1#--*=} - shift ;; - -q|--q|--qu|--qui|--quie|--quiet) - # Ignore --quiet under a TAP::Harness. Saying how many tests - # passed without the ok/not ok details is always an error. - test -z "$HARNESS_ACTIVE" && quiet=t; shift ;; - --with-dashes) - with_dashes=t; shift ;; - --no-color) - color=; shift ;; - --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) - valgrind=memcheck - shift ;; - --valgrind=*) - valgrind=${1#--*=} - shift ;; - --valgrind-only=*) - valgrind_only=${1#--*=} - shift ;; - --tee) - shift ;; # was handled already - --root=*) - root=${1#--*=} - shift ;; - --chain-lint) - GIT_TEST_CHAIN_LINT=1 - shift ;; - --no-chain-lint) - GIT_TEST_CHAIN_LINT=0 - shift ;; - -x) - # Some test scripts can't be reliably traced with '-x', - # unless the test is run with a Bash version supporting - # BASH_XTRACEFD (introduced in Bash v4.1). Check whether - # this test is marked as such, and ignore '-x' if it - # isn't executed with a suitable Bash version. - if test -z "$test_untraceable" || { - test -n "$BASH_VERSION" && { - test ${BASH_VERSINFO[0]} -gt 4 || { - test ${BASH_VERSINFO[0]} -eq 4 && - test ${BASH_VERSINFO[1]} -ge 1 - } - } - } - then - trace=t - else - echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" - fi - shift ;; - -V|--verbose-log) - verbose_log=t - shift ;; - *) - echo "error: unknown test option '$1'" >&2; exit 1 ;; - esac -done - -if test -n "$valgrind_only" -then - test -z "$valgrind" && valgrind=memcheck - test -z "$verbose" && verbose_only="$valgrind_only" -elif test -n "$valgrind" -then - test -z "$verbose_log" && verbose=t -fi - -if test -n "$trace" && test -z "$verbose_log" -then - verbose=t -fi - if test -n "$color" then # Save the color control sequences now rather than run tput @@ -398,6 +576,7 @@ export TERM error () { say_color error "error: $*" + finalize_junit_xml GIT_EXIT_OK=t exit 1 } @@ -465,6 +644,10 @@ test_external_has_tap=0 die () { code=$? + # This is responsible for running the atexit commands even when a + # test script run with '--immediate' fails, or when the user hits + # ctrl-C, i.e. when 'test_done' is not invoked at all. + test_atexit_handler || code=$? if test -n "$GIT_EXIT_OK" then exit $code @@ -476,7 +659,10 @@ die () { GIT_EXIT_OK= trap 'die' EXIT -trap 'exit $?' INT +# Disable '-x' tracing, because with some shells, notably dash, it +# prevents running the cleanup commands when a test script run with +# '--verbose-log -x' is interrupted. +trap '{ code=$?; set +x; } 2>/dev/null; exit $code' INT TERM HUP # The user-facing functions are loaded from a separate file so that # test_perf subshells can have them too @@ -486,24 +672,56 @@ trap 'exit $?' INT # the test_expect_* functions instead. test_ok_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$*" + fi test_success=$(($test_success + 1)) say_color "" "ok $test_count - $@" } test_failure_ () { + if test -n "$write_junit_xml" + then + junit_insert="<failure message=\"not ok $test_count -" + junit_insert="$junit_insert $(xml_attr_encode "$1")\">" + junit_insert="$junit_insert $(xml_attr_encode \ + "$(if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + test-tool path-utils skip-n-bytes \ + "$GIT_TEST_TEE_OUTPUT_FILE" $GIT_TEST_TEE_OFFSET + else + printf '%s\n' "$@" | sed 1d + fi)")" + junit_insert="$junit_insert</failure>" + if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + junit_insert="$junit_insert<system-err>$(xml_attr_encode \ + "$(cat "$GIT_TEST_TEE_OUTPUT_FILE")")</system-err>" + fi + write_junit_xml_testcase "$1" " $junit_insert" + fi test_failure=$(($test_failure + 1)) say_color error "not ok $test_count - $1" shift printf '%s\n' "$*" | sed -e 's/^/# /' - test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; } + test "$immediate" = "" || { finalize_junit_xml; GIT_EXIT_OK=t; exit 1; } } test_known_broken_ok_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$* (breakage fixed)" + fi test_fixed=$(($test_fixed+1)) say_color error "ok $test_count - $@ # TODO known breakage vanished" } test_known_broken_failure_ () { + if test -n "$write_junit_xml" + then + write_junit_xml_testcase "$* (known breakage)" + fi test_broken=$(($test_broken+1)) say_color warn "not ok $test_count - $@ # TODO known breakage" } @@ -761,12 +979,21 @@ test_start_ () { test_count=$(($test_count+1)) maybe_setup_verbose maybe_setup_valgrind + if test -n "$write_junit_xml" + then + junit_start=$(test-tool date getnanos) + fi } test_finish_ () { echo >&3 "" maybe_teardown_valgrind maybe_teardown_verbose + if test -n "$GIT_TEST_TEE_OFFSET" + then + GIT_TEST_TEE_OFFSET=$(test-tool path-utils file-size \ + "$GIT_TEST_TEE_OUTPUT_FILE") + fi } test_skip () { @@ -777,6 +1004,12 @@ test_skip () { to_skip=t skipped_reason="GIT_SKIP_TESTS" fi + if test -z "$to_skip" && test -n "$run_list" && + ! match_test_selector_list '--run' $test_count "$run_list" + then + to_skip=t + skipped_reason="--run" + fi if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq" then @@ -789,15 +1022,16 @@ test_skip () { fi skipped_reason="missing $missing_prereq${of_prereq}" fi - if test -z "$to_skip" && test -n "$run_list" && - ! match_test_selector_list '--run' $test_count "$run_list" - then - to_skip=t - skipped_reason="--run" - fi case "$to_skip" in t) + if test -n "$write_junit_xml" + then + message="$(xml_attr_encode "$skipped_reason")" + write_junit_xml_testcase "$1" \ + " <skipped message=\"$message\" />" + fi + say_color skip >&3 "skipping test: $@" say_color skip "ok $test_count # skip $1 ($skipped_reason)" : true @@ -813,17 +1047,81 @@ test_at_end_hook_ () { : } +write_junit_xml () { + case "$1" in + --truncate) + >"$junit_xml_path" + junit_have_testcase= + shift + ;; + esac + printf '%s\n' "$@" >>"$junit_xml_path" +} + +xml_attr_encode () { + printf '%s\n' "$@" | test-tool xml-encode +} + +write_junit_xml_testcase () { + junit_attrs="name=\"$(xml_attr_encode "$this_test.$test_count $1")\"" + shift + junit_attrs="$junit_attrs classname=\"$this_test\"" + junit_attrs="$junit_attrs time=\"$(test-tool \ + date getnanos $junit_start)\"" + write_junit_xml "$(printf '%s\n' \ + " <testcase $junit_attrs>" "$@" " </testcase>")" + junit_have_testcase=t +} + +finalize_junit_xml () { + if test -n "$write_junit_xml" && test -n "$junit_xml_path" + then + test -n "$junit_have_testcase" || { + junit_start=$(test-tool date getnanos) + write_junit_xml_testcase "all tests skipped" + } + + # adjust the overall time + junit_time=$(test-tool date getnanos $junit_suite_start) + sed -e "s/\(<testsuite.*\) time=\"[^\"]*\"/\1/" \ + -e "s/<testsuite [^>]*/& time=\"$junit_time\"/" \ + <"$junit_xml_path" >"$junit_xml_path.new" + mv "$junit_xml_path.new" "$junit_xml_path" + + write_junit_xml " </testsuite>" "</testsuites>" + write_junit_xml= + fi +} + +test_atexit_cleanup=: +test_atexit_handler () { + # In a succeeding test script 'test_atexit_handler' is invoked + # twice: first from 'test_done', then from 'die' in the trap on + # EXIT. + # This condition and resetting 'test_atexit_cleanup' below makes + # sure that the registered cleanup commands are run only once. + test : != "$test_atexit_cleanup" || return 0 + + setup_malloc_check + test_eval_ "$test_atexit_cleanup" + test_atexit_cleanup=: + teardown_malloc_check +} + test_done () { GIT_EXIT_OK=t + # Run the atexit commands _before_ the trash directory is + # removed, so the commands can access pidfiles and socket files. + test_atexit_handler + + finalize_junit_xml + if test -z "$HARNESS_ACTIVE" then - test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results" - mkdir -p "$test_results_dir" - base=${0##*/} - test_results_path="$test_results_dir/${base%.sh}.counts" + mkdir -p "$TEST_RESULTS_DIR" - cat >"$test_results_path" <<-EOF + cat >"$TEST_RESULTS_BASE.counts" <<-EOF total $test_count success $test_success fixed $test_fixed @@ -878,7 +1176,11 @@ test_done () { error "Tests passed but trash directory already removed before test cleanup; aborting" cd "$TRASH_DIRECTORY/.." && - rm -fr "$TRASH_DIRECTORY" || + rm -fr "$TRASH_DIRECTORY" || { + # try again in a bit + sleep 5; + rm -fr "$TRASH_DIRECTORY" + } || error "Tests passed but test cleanup failed; aborting" fi test_at_end_hook_ @@ -984,20 +1286,25 @@ then PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} else # normal case, use ../bin-wrappers only unless $with_dashes: - git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" - if ! test -x "$git_bin_dir/git" + if test -n "$no_bin_wrappers" then - if test -z "$with_dashes" + with_dashes=t + else + git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" + if ! test -x "$git_bin_dir/git" then - say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" + if test -z "$with_dashes" + then + say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" + fi + with_dashes=t fi - with_dashes=t + PATH="$git_bin_dir:$PATH" fi - PATH="$git_bin_dir:$PATH" GIT_EXEC_PATH=$GIT_BUILD_DIR if test -n "$with_dashes" then - PATH="$GIT_BUILD_DIR:$PATH" + PATH="$GIT_BUILD_DIR:$GIT_BUILD_DIR/t/helper:$PATH" fi fi GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt @@ -1021,7 +1328,7 @@ test -d "$GIT_BUILD_DIR"/templates/blt || { error "You haven't built things yet, have you?" } -if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool +if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool$X then echo >&2 'You need to build test-tool:' echo >&2 'Run "make t/helper/test-tool" in the source (toplevel) directory' @@ -1029,12 +1336,6 @@ then fi # Test repository -TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)" -test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" -case "$TRASH_DIRECTORY" in -/*) ;; # absolute path is good - *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; -esac rm -fr "$TRASH_DIRECTORY" || { GIT_EXIT_OK=t echo >&5 "FATAL: Cannot prepare test area" @@ -1051,6 +1352,7 @@ then else mkdir -p "$TRASH_DIRECTORY" fi + # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). cd -P "$TRASH_DIRECTORY" || exit 1 @@ -1064,7 +1366,28 @@ then test_done fi -# Provide an implementation of the 'yes' utility +if test -n "$write_junit_xml" +then + junit_xml_dir="$TEST_OUTPUT_DIRECTORY/out" + mkdir -p "$junit_xml_dir" + junit_xml_base=${0##*/} + junit_xml_path="$junit_xml_dir/TEST-${junit_xml_base%.sh}.xml" + junit_attrs="name=\"${junit_xml_base%.sh}\"" + junit_attrs="$junit_attrs timestamp=\"$(TZ=UTC \ + date +%Y-%m-%dT%H:%M:%S)\"" + write_junit_xml --truncate "<testsuites>" " <testsuite $junit_attrs>" + junit_suite_start=$(test-tool date getnanos) + if test -n "$GIT_TEST_TEE_OUTPUT_FILE" + then + GIT_TEST_TEE_OFFSET=0 + fi +fi + +# Provide an implementation of the 'yes' utility; the upper bound +# limit is there to help Windows that cannot stop this loop from +# wasting cycles when the downstream stops reading, so do not be +# tempted to turn it into an infinite loop. cf. 6129c930 ("test-lib: +# limit the output of the yes utility", 2016-02-02) yes () { if test $# = 0 then @@ -1081,7 +1404,26 @@ yes () { done } -# Fix some commands on Windows +# The GIT_TEST_FAIL_PREREQS code hooks into test_set_prereq(), and +# thus needs to be set up really early, and set an internal variable +# for convenience so the hot test_set_prereq() codepath doesn't need +# to call "git env--helper" (via test_bool_env). Only do that work +# if needed by seeing if GIT_TEST_FAIL_PREREQS is set at all. +GIT_TEST_FAIL_PREREQS_INTERNAL= +if test -n "$GIT_TEST_FAIL_PREREQS" +then + if test_bool_env GIT_TEST_FAIL_PREREQS false + then + GIT_TEST_FAIL_PREREQS_INTERNAL=true + test_set_prereq FAIL_PREREQS + fi +else + test_lazy_prereq FAIL_PREREQS ' + test_bool_env GIT_TEST_FAIL_PREREQS false + ' +fi + +# Fix some commands on Windows, and other OS-specific things uname_s=$(uname -s) case $uname_s in *MINGW*) @@ -1112,6 +1454,12 @@ case $uname_s in test_set_prereq SED_STRIPS_CR test_set_prereq GREP_STRIPS_CR ;; +FreeBSD) + test_set_prereq REGEX_ILLSEQ + test_set_prereq POSIXPERM + test_set_prereq BSLASHPSPEC + test_set_prereq EXECKEEPSPID + ;; *) test_set_prereq POSIXPERM test_set_prereq BSLASHPSPEC @@ -1131,14 +1479,13 @@ test -z "$NO_GETTEXT" && test_set_prereq GETTEXT if test -n "$GIT_TEST_GETTEXT_POISON_ORIG" then GIT_TEST_GETTEXT_POISON=$GIT_TEST_GETTEXT_POISON_ORIG + export GIT_TEST_GETTEXT_POISON unset GIT_TEST_GETTEXT_POISON_ORIG fi -# Can we rely on git's output in the C locale? -if test -z "$GIT_TEST_GETTEXT_POISON" -then - test_set_prereq C_LOCALE_OUTPUT -fi +test_lazy_prereq C_LOCALE_OUTPUT ' + ! test_bool_env GIT_TEST_GETTEXT_POISON false +' if test -z "$GIT_TEST_CHECK_CACHE_TREE" then @@ -1213,7 +1560,7 @@ test_lazy_prereq NOT_ROOT ' ' test_lazy_prereq JGIT ' - type jgit + jgit --version ' # SANITY is about "can you correctly predict what the filesystem would |