diff options
Diffstat (limited to 'setup.c')
| -rw-r--r-- | setup.c | 575 |
1 files changed, 575 insertions, 0 deletions
@@ -0,0 +1,575 @@ +#include "cache.h" +#include "dir.h" + +static int inside_git_dir = -1; +static int inside_work_tree = -1; + +const char *prefix_path(const char *prefix, int len, const char *path) +{ + const char *orig = path; + char *sanitized = xmalloc(len + strlen(path) + 1); + if (is_absolute_path(orig)) + strcpy(sanitized, path); + else { + if (len) + memcpy(sanitized, prefix, len); + strcpy(sanitized + len, path); + } + if (normalize_path_copy(sanitized, sanitized)) + goto error_out; + if (is_absolute_path(orig)) { + size_t root_len, len, total; + const char *work_tree = get_git_work_tree(); + if (!work_tree) + goto error_out; + len = strlen(work_tree); + root_len = offset_1st_component(work_tree); + total = strlen(sanitized) + 1; + if (strncmp(sanitized, work_tree, len) || + (len > root_len && sanitized[len] != '\0' && sanitized[len] != '/')) { + error_out: + die("'%s' is outside repository", orig); + } + if (sanitized[len] == '/') + len++; + memmove(sanitized, sanitized + len, total - len); + } + return sanitized; +} + +/* + * Unlike prefix_path, this should be used if the named file does + * not have to interact with index entry; i.e. name of a random file + * on the filesystem. + */ +const char *prefix_filename(const char *pfx, int pfx_len, const char *arg) +{ + static char path[PATH_MAX]; +#ifndef WIN32 + if (!pfx || !*pfx || is_absolute_path(arg)) + return arg; + memcpy(path, pfx, pfx_len); + strcpy(path + pfx_len, arg); +#else + char *p; + /* don't add prefix to absolute paths, but still replace '\' by '/' */ + if (is_absolute_path(arg)) + pfx_len = 0; + else + memcpy(path, pfx, pfx_len); + strcpy(path + pfx_len, arg); + for (p = path + pfx_len; *p; p++) + if (*p == '\\') + *p = '/'; +#endif + return path; +} + +int check_filename(const char *prefix, const char *arg) +{ + const char *name; + struct stat st; + + name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg; + if (!lstat(name, &st)) + return 1; /* file exists */ + if (errno == ENOENT || errno == ENOTDIR) + return 0; /* file does not exist */ + die_errno("failed to stat '%s'", arg); +} + +static void NORETURN die_verify_filename(const char *prefix, const char *arg) +{ + unsigned char sha1[20]; + unsigned mode; + /* try a detailed diagnostic ... */ + get_sha1_with_mode_1(arg, sha1, &mode, 0, prefix); + /* ... or fall back the most general message. */ + die("ambiguous argument '%s': unknown revision or path not in the working tree.\n" + "Use '--' to separate paths from revisions", arg); + +} + +/* + * Verify a filename that we got as an argument for a pathspec + * entry. Note that a filename that begins with "-" never verifies + * as true, because even if such a filename were to exist, we want + * it to be preceded by the "--" marker (or we want the user to + * use a format like "./-filename") + */ +void verify_filename(const char *prefix, const char *arg) +{ + if (*arg == '-') + die("bad flag '%s' used after filename", arg); + if (check_filename(prefix, arg)) + return; + die_verify_filename(prefix, arg); +} + +/* + * Opposite of the above: the command line did not have -- marker + * and we parsed the arg as a refname. It should not be interpretable + * as a filename. + */ +void verify_non_filename(const char *prefix, const char *arg) +{ + if (!is_inside_work_tree() || is_inside_git_dir()) + return; + if (*arg == '-') + return; /* flag */ + if (!check_filename(prefix, arg)) + return; + die("ambiguous argument '%s': both revision and filename\n" + "Use '--' to separate filenames from revisions", arg); +} + +const char **get_pathspec(const char *prefix, const char **pathspec) +{ + const char *entry = *pathspec; + const char **src, **dst; + int prefixlen; + + if (!prefix && !entry) + return NULL; + + if (!entry) { + static const char *spec[2]; + spec[0] = prefix; + spec[1] = NULL; + return spec; + } + + /* Otherwise we have to re-write the entries.. */ + src = pathspec; + dst = pathspec; + prefixlen = prefix ? strlen(prefix) : 0; + while (*src) { + const char *p = prefix_path(prefix, prefixlen, *src); + *(dst++) = p; + src++; + } + *dst = NULL; + if (!*pathspec) + return NULL; + return pathspec; +} + +/* + * Test if it looks like we're at a git directory. + * We want to see: + * + * - either an objects/ directory _or_ the proper + * GIT_OBJECT_DIRECTORY environment variable + * - a refs/ directory + * - either a HEAD symlink or a HEAD file that is formatted as + * a proper "ref:", or a regular file HEAD that has a properly + * formatted sha1 object name. + */ +static int is_git_directory(const char *suspect) +{ + char path[PATH_MAX]; + size_t len = strlen(suspect); + + if (PATH_MAX <= len + strlen("/objects")) + die("Too long path: %.*s", 60, suspect); + strcpy(path, suspect); + if (getenv(DB_ENVIRONMENT)) { + if (access(getenv(DB_ENVIRONMENT), X_OK)) + return 0; + } + else { + strcpy(path + len, "/objects"); + if (access(path, X_OK)) + return 0; + } + + strcpy(path + len, "/refs"); + if (access(path, X_OK)) + return 0; + + strcpy(path + len, "/HEAD"); + if (validate_headref(path)) + return 0; + + return 1; +} + +int is_inside_git_dir(void) +{ + if (inside_git_dir < 0) + inside_git_dir = is_inside_dir(get_git_dir()); + return inside_git_dir; +} + +int is_inside_work_tree(void) +{ + if (inside_work_tree < 0) + inside_work_tree = is_inside_dir(get_git_work_tree()); + return inside_work_tree; +} + +/* + * set_work_tree() is only ever called if you set GIT_DIR explicitly. + * The old behaviour (which we retain here) is to set the work tree root + * to the cwd, unless overridden by the config, the command line, or + * GIT_WORK_TREE. + */ +static const char *set_work_tree(const char *dir) +{ + char buffer[PATH_MAX + 1]; + + if (!getcwd(buffer, sizeof(buffer))) + die ("Could not get the current working directory"); + git_work_tree_cfg = xstrdup(buffer); + inside_work_tree = 1; + + return NULL; +} + +void setup_work_tree(void) +{ + const char *work_tree, *git_dir; + static int initialized = 0; + + if (initialized) + return; + work_tree = get_git_work_tree(); + git_dir = get_git_dir(); + if (!is_absolute_path(git_dir)) + git_dir = make_absolute_path(git_dir); + if (!work_tree || chdir(work_tree)) + die("This operation must be run in a work tree"); + set_git_dir(make_relative_path(git_dir, work_tree)); + initialized = 1; +} + +static int check_repository_format_gently(int *nongit_ok) +{ + git_config(check_repository_format_version, NULL); + if (GIT_REPO_VERSION < repository_format_version) { + if (!nongit_ok) + die ("Expected git repo version <= %d, found %d", + GIT_REPO_VERSION, repository_format_version); + warning("Expected git repo version <= %d, found %d", + GIT_REPO_VERSION, repository_format_version); + warning("Please upgrade Git"); + *nongit_ok = -1; + return -1; + } + return 0; +} + +/* + * Try to read the location of the git directory from the .git file, + * return path to git directory if found. + */ +const char *read_gitfile_gently(const char *path) +{ + char *buf; + char *dir; + const char *slash; + struct stat st; + int fd; + size_t len; + + if (stat(path, &st)) + return NULL; + if (!S_ISREG(st.st_mode)) + return NULL; + fd = open(path, O_RDONLY); + if (fd < 0) + die_errno("Error opening '%s'", path); + buf = xmalloc(st.st_size + 1); + len = read_in_full(fd, buf, st.st_size); + close(fd); + if (len != st.st_size) + die("Error reading %s", path); + buf[len] = '\0'; + if (prefixcmp(buf, "gitdir: ")) + die("Invalid gitfile format: %s", path); + while (buf[len - 1] == '\n' || buf[len - 1] == '\r') + len--; + if (len < 9) + die("No path in gitfile: %s", path); + buf[len] = '\0'; + dir = buf + 8; + + if (!is_absolute_path(dir) && (slash = strrchr(path, '/'))) { + size_t pathlen = slash+1 - path; + size_t dirlen = pathlen + len - 8; + dir = xmalloc(dirlen + 1); + strncpy(dir, path, pathlen); + strncpy(dir + pathlen, buf + 8, len - 8); + dir[dirlen] = '\0'; + free(buf); + buf = dir; + } + + if (!is_git_directory(dir)) + die("Not a git repository: %s", dir); + path = make_absolute_path(dir); + + free(buf); + return path; +} + +/* + * We cannot decide in this function whether we are in the work tree or + * not, since the config can only be read _after_ this function was called. + */ +const char *setup_git_directory_gently(int *nongit_ok) +{ + const char *work_tree_env = getenv(GIT_WORK_TREE_ENVIRONMENT); + const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT); + static char cwd[PATH_MAX+1]; + const char *gitdirenv; + const char *gitfile_dir; + int len, offset, ceil_offset, root_len; + dev_t current_device = 0; + int one_filesystem = 1; + struct stat buf; + + /* + * Let's assume that we are in a git repository. + * If it turns out later that we are somewhere else, the value will be + * updated accordingly. + */ + if (nongit_ok) + *nongit_ok = 0; + + /* + * If GIT_DIR is set explicitly, we're not going + * to do any discovery, but we still do repository + * validation. + */ + gitdirenv = getenv(GIT_DIR_ENVIRONMENT); + if (gitdirenv) { + if (PATH_MAX - 40 < strlen(gitdirenv)) + die("'$%s' too big", GIT_DIR_ENVIRONMENT); + if (is_git_directory(gitdirenv)) { + static char buffer[1024 + 1]; + const char *retval; + + if (!work_tree_env) { + retval = set_work_tree(gitdirenv); + /* config may override worktree */ + if (check_repository_format_gently(nongit_ok)) + return NULL; + return retval; + } + if (check_repository_format_gently(nongit_ok)) + return NULL; + retval = get_relative_cwd(buffer, sizeof(buffer) - 1, + get_git_work_tree()); + if (!retval || !*retval) + return NULL; + set_git_dir(make_absolute_path(gitdirenv)); + if (chdir(work_tree_env) < 0) + die_errno ("Could not chdir to '%s'", work_tree_env); + strcat(buffer, "/"); + return retval; + } + if (nongit_ok) { + *nongit_ok = 1; + return NULL; + } + die("Not a git repository: '%s'", gitdirenv); + } + + if (!getcwd(cwd, sizeof(cwd)-1)) + die_errno("Unable to read current working directory"); + + ceil_offset = longest_ancestor_length(cwd, env_ceiling_dirs); + if (ceil_offset < 0 && has_dos_drive_prefix(cwd)) + ceil_offset = 1; + + /* + * Test in the following order (relative to the cwd): + * - .git (file containing "gitdir: <path>") + * - .git/ + * - ./ (bare) + * - ../.git + * - ../.git/ + * - ../ (bare) + * - ../../.git/ + * etc. + */ + offset = len = strlen(cwd); + one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0); + if (one_filesystem) { + if (stat(".", &buf)) + die_errno("failed to stat '.'"); + current_device = buf.st_dev; + } + for (;;) { + gitfile_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT); + if (gitfile_dir) { + if (set_git_dir(gitfile_dir)) + die("Repository setup failed"); + break; + } + if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT)) + break; + if (is_git_directory(".")) { + inside_git_dir = 1; + if (!work_tree_env) + inside_work_tree = 0; + if (offset != len) { + root_len = offset_1st_component(cwd); + cwd[offset > root_len ? offset : root_len] = '\0'; + set_git_dir(cwd); + } else + set_git_dir("."); + check_repository_format_gently(nongit_ok); + return NULL; + } + while (--offset > ceil_offset && cwd[offset] != '/'); + if (offset <= ceil_offset) { + if (nongit_ok) { + if (chdir(cwd)) + die_errno("Cannot come back to cwd"); + *nongit_ok = 1; + return NULL; + } + die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT); + } + if (one_filesystem) { + if (stat("..", &buf)) { + cwd[offset] = '\0'; + die_errno("failed to stat '%s/..'", cwd); + } + if (buf.st_dev != current_device) { + if (nongit_ok) { + if (chdir(cwd)) + die_errno("Cannot come back to cwd"); + *nongit_ok = 1; + return NULL; + } + cwd[offset] = '\0'; + die("Not a git repository (or any parent up to mount parent %s)\n" + "Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).", cwd); + } + } + if (chdir("..")) { + cwd[offset] = '\0'; + die_errno("Cannot change to '%s/..'", cwd); + } + } + + inside_git_dir = 0; + if (!work_tree_env) + inside_work_tree = 1; + root_len = offset_1st_component(cwd); + git_work_tree_cfg = xstrndup(cwd, offset > root_len ? offset : root_len); + if (check_repository_format_gently(nongit_ok)) + return NULL; + if (offset == len) + return NULL; + + /* Make "offset" point to past the '/', and add a '/' at the end */ + offset++; + cwd[len++] = '/'; + cwd[len] = 0; + return cwd + offset; +} + +int git_config_perm(const char *var, const char *value) +{ + int i; + char *endptr; + + if (value == NULL) + return PERM_GROUP; + + if (!strcmp(value, "umask")) + return PERM_UMASK; + if (!strcmp(value, "group")) + return PERM_GROUP; + if (!strcmp(value, "all") || + !strcmp(value, "world") || + !strcmp(value, "everybody")) + return PERM_EVERYBODY; + + /* Parse octal numbers */ + i = strtol(value, &endptr, 8); + + /* If not an octal number, maybe true/false? */ + if (*endptr != 0) + return git_config_bool(var, value) ? PERM_GROUP : PERM_UMASK; + + /* + * Treat values 0, 1 and 2 as compatibility cases, otherwise it is + * a chmod value to restrict to. + */ + switch (i) { + case PERM_UMASK: /* 0 */ + return PERM_UMASK; + case OLD_PERM_GROUP: /* 1 */ + return PERM_GROUP; + case OLD_PERM_EVERYBODY: /* 2 */ + return PERM_EVERYBODY; + } + + /* A filemode value was given: 0xxx */ + + if ((i & 0600) != 0600) + die("Problem with core.sharedRepository filemode value " + "(0%.3o).\nThe owner of files must always have " + "read and write permissions.", i); + + /* + * Mask filemode value. Others can not get write permission. + * x flags for directories are handled separately. + */ + return -(i & 0666); +} + +int check_repository_format_version(const char *var, const char *value, void *cb) +{ + if (strcmp(var, "core.repositoryformatversion") == 0) + repository_format_version = git_config_int(var, value); + else if (strcmp(var, "core.sharedrepository") == 0) + shared_repository = git_config_perm(var, value); + else if (strcmp(var, "core.bare") == 0) { + is_bare_repository_cfg = git_config_bool(var, value); + if (is_bare_repository_cfg == 1) + inside_work_tree = -1; + } else if (strcmp(var, "core.worktree") == 0) { + if (!value) + return config_error_nonbool(var); + free(git_work_tree_cfg); + git_work_tree_cfg = xstrdup(value); + inside_work_tree = -1; + } + return 0; +} + +int check_repository_format(void) +{ + return check_repository_format_gently(NULL); +} + +/* + * Returns the "prefix", a path to the current working directory + * relative to the work tree root, or NULL, if the current working + * directory is not a strict subdirectory of the work tree root. The + * prefix always ends with a '/' character. + */ +const char *setup_git_directory(void) +{ + const char *retval = setup_git_directory_gently(NULL); + + /* If the work tree is not the default one, recompute prefix */ + if (inside_work_tree < 0) { + static char buffer[PATH_MAX + 1]; + char *rel; + if (retval && chdir(retval)) + die_errno ("Could not jump back into original cwd"); + rel = get_relative_cwd(buffer, PATH_MAX, get_git_work_tree()); + if (rel && *rel && chdir(get_git_work_tree())) + die_errno ("Could not jump to working directory"); + return rel && *rel ? strcat(rel, "/") : NULL; + } + + return retval; +} |