diff options
Diffstat (limited to 'git-bisect.sh')
| -rwxr-xr-x | git-bisect.sh | 509 |
1 files changed, 509 insertions, 0 deletions
diff --git a/git-bisect.sh b/git-bisect.sh new file mode 100755 index 0000000..99efbe8 --- /dev/null +++ b/git-bisect.sh @@ -0,0 +1,509 @@ +#!/bin/sh + +USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]' +LONG_USAGE='git bisect help + print this long help message. +git bisect start [--no-checkout] [<bad> [<good>...]] [--] [<pathspec>...] + reset bisect state and start bisection. +git bisect bad [<rev>] + mark <rev> a known-bad revision. +git bisect good [<rev>...] + mark <rev>... known-good revisions. +git bisect skip [(<rev>|<range>)...] + mark <rev>... untestable revisions. +git bisect next + find next bisection to test and check it out. +git bisect reset [<commit>] + finish bisection search and go back to commit. +git bisect visualize + show bisect status in gitk. +git bisect replay <logfile> + replay bisection log. +git bisect log + show bisect log. +git bisect run <cmd>... + use <cmd>... to automatically bisect. + +Please use "git help bisect" to get the full man page.' + +OPTIONS_SPEC= +. git-sh-setup +. git-sh-i18n + +_x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' +_x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40" + +bisect_head() +{ + if test -f "$GIT_DIR/BISECT_HEAD" + then + echo BISECT_HEAD + else + echo HEAD + fi +} + +bisect_autostart() { + test -s "$GIT_DIR/BISECT_START" || { + gettextln "You need to start by \"git bisect start\"" >&2 + if test -t 0 + then + # TRANSLATORS: Make sure to include [Y] and [n] in your + # translation. The program will only accept English input + # at this point. + gettext "Do you want me to do it for you [Y/n]? " >&2 + read yesno + case "$yesno" in + [Nn]*) + exit ;; + esac + bisect_start + else + exit 1 + fi + } +} + +bisect_start() { + # + # Check for one bad and then some good revisions. + # + has_double_dash=0 + for arg; do + case "$arg" in --) has_double_dash=1; break ;; esac + done + orig_args=$(git rev-parse --sq-quote "$@") + bad_seen=0 + eval='' + if test "z$(git rev-parse --is-bare-repository)" != zfalse + then + mode=--no-checkout + else + mode='' + fi + while [ $# -gt 0 ]; do + arg="$1" + case "$arg" in + --) + shift + break + ;; + --no-checkout) + mode=--no-checkout + shift ;; + --*) + die "$(eval_gettext "unrecognised option: '\$arg'")" ;; + *) + rev=$(git rev-parse -q --verify "$arg^{commit}") || { + test $has_double_dash -eq 1 && + die "$(eval_gettext "'\$arg' does not appear to be a valid revision")" + break + } + case $bad_seen in + 0) state='bad' ; bad_seen=1 ;; + *) state='good' ;; + esac + eval="$eval bisect_write '$state' '$rev' 'nolog' &&" + shift + ;; + esac + done + + # + # Verify HEAD. + # + head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) || + head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) || + die "$(gettext "Bad HEAD - I need a HEAD")" + + # + # Check if we are bisecting. + # + start_head='' + if test -s "$GIT_DIR/BISECT_START" + then + # Reset to the rev from where we started. + start_head=$(cat "$GIT_DIR/BISECT_START") + if test "z$mode" != "z--no-checkout" + then + git checkout "$start_head" -- || + die "$(eval_gettext "Checking out '\$start_head' failed. Try 'git bisect reset <validbranch>'.")" + fi + else + # Get rev from where we start. + case "$head" in + refs/heads/*|$_x40) + # This error message should only be triggered by + # cogito usage, and cogito users should understand + # it relates to cg-seek. + [ -s "$GIT_DIR/head-name" ] && + die "$(gettext "won't bisect on seeked tree")" + start_head="${head#refs/heads/}" + ;; + *) + die "$(gettext "Bad HEAD - strange symbolic ref")" + ;; + esac + fi + + # + # Get rid of any old bisect state. + # + bisect_clean_state || exit + + # + # Change state. + # In case of mistaken revs or checkout error, or signals received, + # "bisect_auto_next" below may exit or misbehave. + # We have to trap this to be able to clean up using + # "bisect_clean_state". + # + trap 'bisect_clean_state' 0 + trap 'exit 255' 1 2 3 15 + + # + # Write new start state. + # + echo "$start_head" >"$GIT_DIR/BISECT_START" && { + test "z$mode" != "z--no-checkout" || + git update-ref --no-deref BISECT_HEAD "$start_head" + } && + git rev-parse --sq-quote "$@" >"$GIT_DIR/BISECT_NAMES" && + eval "$eval true" && + echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit + # + # Check if we can proceed to the next bisect state. + # + bisect_auto_next + + trap '-' 0 +} + +bisect_write() { + state="$1" + rev="$2" + nolog="$3" + case "$state" in + bad) tag="$state" ;; + good|skip) tag="$state"-"$rev" ;; + *) die "$(eval_gettext "Bad bisect_write argument: \$state")" ;; + esac + git update-ref "refs/bisect/$tag" "$rev" || exit + echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG" + test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG" +} + +is_expected_rev() { + test -f "$GIT_DIR/BISECT_EXPECTED_REV" && + test "$1" = $(cat "$GIT_DIR/BISECT_EXPECTED_REV") +} + +check_expected_revs() { + for _rev in "$@"; do + if ! is_expected_rev "$_rev" + then + rm -f "$GIT_DIR/BISECT_ANCESTORS_OK" + rm -f "$GIT_DIR/BISECT_EXPECTED_REV" + return + fi + done +} + +bisect_skip() { + all='' + for arg in "$@" + do + case "$arg" in + *..*) + revs=$(git rev-list "$arg") || die "$(eval_gettext "Bad rev input: \$arg")" ;; + *) + revs=$(git rev-parse --sq-quote "$arg") ;; + esac + all="$all $revs" + done + eval bisect_state 'skip' $all +} + +bisect_state() { + bisect_autostart + state=$1 + case "$#,$state" in + 0,*) + die "$(gettext "Please call 'bisect_state' with at least one argument.")" ;; + 1,bad|1,good|1,skip) + rev=$(git rev-parse --verify $(bisect_head)) || + die "$(gettext "Bad rev input: $(bisect_head)")" + bisect_write "$state" "$rev" + check_expected_revs "$rev" ;; + 2,bad|*,good|*,skip) + shift + eval='' + for rev in "$@" + do + sha=$(git rev-parse --verify "$rev^{commit}") || + die "$(eval_gettext "Bad rev input: \$rev")" + eval="$eval bisect_write '$state' '$sha'; " + done + eval "$eval" + check_expected_revs "$@" ;; + *,bad) + die "$(gettext "'git bisect bad' can take only one argument.")" ;; + *) + usage ;; + esac + bisect_auto_next +} + +bisect_next_check() { + missing_good= missing_bad= + git show-ref -q --verify refs/bisect/bad || missing_bad=t + test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t + + case "$missing_good,$missing_bad,$1" in + ,,*) + : have both good and bad - ok + ;; + *,) + # do not have both but not asked to fail - just report. + false + ;; + t,,good) + # have bad but not good. we could bisect although + # this is less optimum. + gettextln "Warning: bisecting only with a bad commit." >&2 + if test -t 0 + then + # TRANSLATORS: Make sure to include [Y] and [n] in your + # translation. The program will only accept English input + # at this point. + gettext "Are you sure [Y/n]? " >&2 + read yesno + case "$yesno" in [Nn]*) exit 1 ;; esac + fi + : bisect without good... + ;; + *) + + if test -s "$GIT_DIR/BISECT_START" + then + gettextln "You need to give me at least one good and one bad revisions. +(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2 + else + gettextln "You need to start by \"git bisect start\". +You then need to give me at least one good and one bad revisions. +(You can use \"git bisect bad\" and \"git bisect good\" for that.)" >&2 + fi + exit 1 ;; + esac +} + +bisect_auto_next() { + bisect_next_check && bisect_next || : +} + +bisect_next() { + case "$#" in 0) ;; *) usage ;; esac + bisect_autostart + bisect_next_check good + + # Perform all bisection computation, display and checkout + git bisect--helper --next-all $(test -f "$GIT_DIR/BISECT_HEAD" && echo --no-checkout) + res=$? + + # Check if we should exit because bisection is finished + test $res -eq 10 && exit 0 + + # Check for an error in the bisection process + test $res -ne 0 && exit $res + + return 0 +} + +bisect_visualize() { + bisect_next_check fail + + if test $# = 0 + then + if test -n "${DISPLAY+set}${SESSIONNAME+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" && + type gitk >/dev/null 2>&1 + then + set gitk + else + set git log + fi + else + case "$1" in + git*|tig) ;; + -*) set git log "$@" ;; + *) set git "$@" ;; + esac + fi + + eval '"$@"' --bisect -- $(cat "$GIT_DIR/BISECT_NAMES") +} + +bisect_reset() { + test -s "$GIT_DIR/BISECT_START" || { + gettextln "We are not bisecting." + return + } + case "$#" in + 0) branch=$(cat "$GIT_DIR/BISECT_START") ;; + 1) git rev-parse --quiet --verify "$1^{commit}" > /dev/null || { + invalid="$1" + die "$(eval_gettext "'\$invalid' is not a valid commit")" + } + branch="$1" ;; + *) + usage ;; + esac + + if ! test -f "$GIT_DIR/BISECT_HEAD" && ! git checkout "$branch" -- + then + die "$(eval_gettext "Could not check out original HEAD '\$branch'. +Try 'git bisect reset <commit>'.")" + fi + bisect_clean_state +} + +bisect_clean_state() { + # There may be some refs packed during bisection. + git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* | + while read ref hash + do + git update-ref -d $ref $hash || exit + done + rm -f "$GIT_DIR/BISECT_EXPECTED_REV" && + rm -f "$GIT_DIR/BISECT_ANCESTORS_OK" && + rm -f "$GIT_DIR/BISECT_LOG" && + rm -f "$GIT_DIR/BISECT_NAMES" && + rm -f "$GIT_DIR/BISECT_RUN" && + # Cleanup head-name if it got left by an old version of git-bisect + rm -f "$GIT_DIR/head-name" && + git update-ref -d --no-deref BISECT_HEAD && + # clean up BISECT_START last + rm -f "$GIT_DIR/BISECT_START" +} + +bisect_replay () { + file="$1" + test "$#" -eq 1 || die "$(gettext "No logfile given")" + test -r "$file" || die "$(eval_gettext "cannot read \$file for replaying")" + bisect_reset + while read git bisect command rev + do + test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue + if test "$git" = "git-bisect" + then + rev="$command" + command="$bisect" + fi + case "$command" in + start) + cmd="bisect_start $rev" + eval "$cmd" ;; + good|bad|skip) + bisect_write "$command" "$rev" ;; + *) + die "$(gettext "?? what are you talking about?")" ;; + esac + done <"$file" + bisect_auto_next +} + +bisect_run () { + bisect_next_check fail + + while true + do + command="$@" + eval_gettextln "running \$command" + "$@" + res=$? + + # Check for really bad run error. + if [ $res -lt 0 -o $res -ge 128 ] + then + eval_gettextln "bisect run failed: +exit code \$res from '\$command' is < 0 or >= 128" >&2 + exit $res + fi + + # Find current state depending on run success or failure. + # A special exit code of 125 means cannot test. + if [ $res -eq 125 ] + then + state='skip' + elif [ $res -gt 0 ] + then + state='bad' + else + state='good' + fi + + # We have to use a subshell because "bisect_state" can exit. + ( bisect_state $state > "$GIT_DIR/BISECT_RUN" ) + res=$? + + cat "$GIT_DIR/BISECT_RUN" + + if sane_grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \ + > /dev/null + then + gettextln "bisect run cannot continue any more" >&2 + exit $res + fi + + if [ $res -ne 0 ] + then + eval_gettextln "bisect run failed: +'bisect_state \$state' exited with error code \$res" >&2 + exit $res + fi + + if sane_grep "is the first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null + then + gettextln "bisect run success" + exit 0; + fi + + done +} + +bisect_log () { + test -s "$GIT_DIR/BISECT_LOG" || die "$(gettext "We are not bisecting.")" + cat "$GIT_DIR/BISECT_LOG" +} + +case "$#" in +0) + usage ;; +*) + cmd="$1" + shift + case "$cmd" in + help) + git bisect -h ;; + start) + bisect_start "$@" ;; + bad|good) + bisect_state "$cmd" "$@" ;; + skip) + bisect_skip "$@" ;; + next) + # Not sure we want "next" at the UI level anymore. + bisect_next "$@" ;; + visualize|view) + bisect_visualize "$@" ;; + reset) + bisect_reset "$@" ;; + replay) + bisect_replay "$@" ;; + log) + bisect_log ;; + run) + bisect_run "$@" ;; + *) + usage ;; + esac +esac |