diff options
Diffstat (limited to 'contrib/hooks/multimail/README')
| -rw-r--r-- | contrib/hooks/multimail/README | 215 |
1 files changed, 116 insertions, 99 deletions
diff --git a/contrib/hooks/multimail/README b/contrib/hooks/multimail/README index 5512068..0c91d19 100644 --- a/contrib/hooks/multimail/README +++ b/contrib/hooks/multimail/README @@ -1,5 +1,5 @@ -git-multimail (version 1.2.0) -============================= +git-multimail 1.3.1 +=================== .. image:: https://travis-ci.org/git-multimail/git-multimail.svg?branch=master :target: https://travis-ci.org/git-multimail/git-multimail @@ -127,6 +127,13 @@ changes of this type, please consider sharing them with the community.) +Troubleshooting/FAQ +------------------- + +Please read `<doc/troubleshooting.rst>`__ for frequently asked +questions and common issues with git-multimail. + + Configuration ------------- @@ -134,19 +141,16 @@ By default, git-multimail mostly takes its configuration from the following ``git config`` settings: multimailhook.environment - This describes the general environment of the repository. In most cases, you do not need to specify a value for this variable: `git-multimail` will autodetect which environment to use. Currently supported values: - * generic - + generic the username of the pusher is read from $USER or $USERNAME and the repository name is derived from the repository's path. - * gitolite - + gitolite the username of the pusher is read from $GL_USER, the repository name is read from $GL_REPO, and the From: header value is optionally read from gitolite.conf (see multimailhook.from). @@ -154,8 +158,7 @@ multimailhook.environment For more information about gitolite and git-multimail, read `<doc/gitolite.rst>`__ - * stash - + stash Environment to use when ``git-multimail`` is ran as an Atlassian BitBucket Server (formerly known as Atlassian Stash) hook. @@ -169,8 +172,7 @@ multimailhook.environment and repo come from these two command line flags, which must be specified. - * gerrit - + gerrit Environment to use when ``git-multimail`` is ran as a ``ref-updated`` Gerrit hook. @@ -205,14 +207,12 @@ multimailhook.environment * If none of the above apply, then ``generic`` is used. multimailhook.repoName - A short name of this Git repository, to be used in various places in the notification email text. The default is to use $GL_REPO for gitolite repositories, or otherwise to derive this value from the repository path name. multimailhook.mailingList - The list of email addresses to which notification emails should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. Leave it unset or set it @@ -221,7 +221,6 @@ multimailhook.mailingList specific types of notification email. multimailhook.refchangeList - The list of email addresses to which summary emails about reference changes should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be @@ -231,7 +230,6 @@ multimailhook.refchangeList multimailhook.mailingList is set. multimailhook.announceList - The list of email addresses to which emails about new annotated tags should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. The @@ -241,7 +239,6 @@ multimailhook.announceList even if one of the other values is set. multimailhook.commitList - The list of email addresses to which emails about individual new commits should be sent, as RFC 2822 email addresses separated by commas. This configuration option can be multivalued. The @@ -251,7 +248,6 @@ multimailhook.commitList multimailhook.mailingList is set. multimailhook.announceShortlog - If this option is set to true, then emails about changes to annotated tags include a shortlog of changes since the previous tag. This can be useful if the annotated tags represent releases; @@ -261,7 +257,6 @@ multimailhook.announceShortlog rather than useful. Default is false. multimailhook.commitEmailFormat - The format of email messages for the individual commits, can be "text" or "html". In the latter case, the emails will include diffs using colorized HTML instead of plain text used by default. Note that this currently the @@ -274,8 +269,43 @@ multimailhook.commitEmailFormat the message starting with ``+++`` or ``---`` colored in red or green). -multimailhook.refchangeShowGraph + By default, all the message is HTML-escaped. See + ``multimailhook.htmlInIntro`` to change this behavior. + +multimailhook.commitBrowseURL + Used to generate a link to an online repository browser in commit + emails. This variable must be a string. Format directives like + ``%(<variable>)s`` will be expanded the same way as template + strings. In particular, ``%(id)s`` will be replaced by the full + Git commit identifier (40-chars hexadecimal). + + If the string does not contain any format directive, then + ``%(id)s`` will be automatically added to the string. If you don't + want ``%(id)s`` to be automatically added, use the empty format + directive ``%()s`` anywhere in the string. + + For example, a suitable value for the git-multimail project itself + would be + ``https://github.com/git-multimail/git-multimail/commit/%(id)s``. + +multimailhook.htmlInIntro, multimailhook.htmlInFooter + When generating an HTML message, git-multimail escapes any HTML + sequence by default. This means that if a template contains HTML + like ``<a href="foo">link</a>``, the reader will see the HTML + source code and not a proper link. + + Set ``multimailhook.htmlInIntro`` to true to allow writting HTML + formatting in introduction templates. Similarly, set + ``multimailhook.htmlInFooter`` for HTML in the footer. + Variables expanded in the template are still escaped. For example, + if a repository's path contains a ``<``, it will be rendered as + such in the message. + + Read `<doc/customizing-emails.rst>`__ for more details and + examples. + +multimailhook.refchangeShowGraph If this option is set to true, then summary emails about reference changes will additionally include: @@ -287,7 +317,6 @@ multimailhook.refchangeShowGraph specified in graphOpts. The default is false. multimailhook.refchangeShowLog - If this option is set to true, then summary emails about reference changes will include a detailed log of the added commits in addition to the one line summary. The log is generated by running @@ -295,71 +324,80 @@ multimailhook.refchangeShowLog Default is false. multimailhook.mailer - This option changes the way emails are sent. Accepted values are: - - sendmail (the default): use the command ``/usr/sbin/sendmail`` or + * **sendmail (the default)**: use the command ``/usr/sbin/sendmail`` or ``/usr/lib/sendmail`` (or sendmailCommand, if configured). This mode can be further customized via the following options: - * multimailhook.sendmailCommand - - The command used by mailer ``sendmail`` to send emails. Shell - quoting is allowed in the value of this setting, but remember that - Git requires double-quotes to be escaped; e.g.:: + multimailhook.sendmailCommand + The command used by mailer ``sendmail`` to send emails. Shell + quoting is allowed in the value of this setting, but remember that + Git requires double-quotes to be escaped; e.g.:: - git config multimailhook.sendmailcommand '/usr/sbin/sendmail -oi -t -F \"Git Repo\"' + git config multimailhook.sendmailcommand '/usr/sbin/sendmail -oi -t -F \"Git Repo\"' - Default is '/usr/sbin/sendmail -oi -t' or - '/usr/lib/sendmail -oi -t' (depending on which file is - present and executable). + Default is '/usr/sbin/sendmail -oi -t' or + '/usr/lib/sendmail -oi -t' (depending on which file is + present and executable). - * multimailhook.envelopeSender + multimailhook.envelopeSender + If set then pass this value to sendmail via the -f option to set + the envelope sender address. - If set then pass this value to sendmail via the -f option to set - the envelope sender address. - - - smtp: use Python's smtplib. This is useful when the sendmail + * **smtp**: use Python's smtplib. This is useful when the sendmail command is not available on the system. This mode can be further customized via the following options: - * multimailhook.smtpServer - - The name of the SMTP server to connect to. The value can - also include a colon and a port number; e.g., - ``mail.example.com:25``. Default is 'localhost' using port 25. - - * multimailhook.smtpUser - * multimailhook.smtpPass - - Server username and password. Required if smtpEncryption is 'ssl'. - Note that the username and password currently need to be - set cleartext in the configuration file, which is not - recommended. If you need to use this option, be sure your - configuration file is read-only. + multimailhook.smtpServer + The name of the SMTP server to connect to. The value can + also include a colon and a port number; e.g., + ``mail.example.com:25``. Default is 'localhost' using port 25. - * multimailhook.envelopeSender + multimailhook.smtpUser, multimailhook.smtpPass + Server username and password. Required if smtpEncryption is 'ssl'. + Note that the username and password currently need to be + set cleartext in the configuration file, which is not + recommended. If you need to use this option, be sure your + configuration file is read-only. + multimailhook.envelopeSender The sender address to be passed to the SMTP server. If unset, then the value of multimailhook.from is used. - * multimailhook.smtpServerTimeout - + multimailhook.smtpServerTimeout Timeout in seconds. - * multimailhook.smtpEncryption - - Set the security type. Allowed values: none, ssl, tls. - Default=none. - - * multimailhook.smtpServerDebugLevel - + multimailhook.smtpEncryption + Set the security type. Allowed values: ``none``, ``ssl``, ``tls`` (starttls). + Default is ``none``. + + multimailhook.smtpCACerts + Set the path to a list of trusted CA certificate to verify the + server certificate, only supported when ``smtpEncryption`` is + ``tls``. If unset or empty, the server certificate is not + verified. If it targets a file containing a list of trusted CA + certificates (PEM format) these CAs will be used to verify the + server certificate. For debian, you can set + ``/etc/ssl/certs/ca-certificates.crt`` for using the system + trusted CAs. For self-signed server, you can add your server + certificate to the system store:: + + cd /usr/local/share/ca-certificates/ + openssl s_client -starttls smtp \ + -connect mail.example.net:587 -showcerts \ + </dev/null 2>/dev/null \ + | openssl x509 -outform PEM >mail.example.net.crt + update-ca-certificates + + and used the updated ``/etc/ssl/certs/ca-certificates.crt``. Or + directly use your ``/path/to/mail.example.net.crt``. Default is + unset. + + multimailhook.smtpServerDebugLevel Integer number. Set to greater than 0 to activate debugging. -multimailhook.from -multimailhook.fromCommit -multimailhook.fromRefchange - +multimailhook.from, multimailhook.fromCommit, multimailhook.fromRefchange If set, use this value in the From: field of generated emails. ``fromCommit`` is used for commit emails, ``fromRefchange`` is used for refchange emails, and ``from`` is used as fall-back in @@ -372,7 +410,7 @@ multimailhook.fromRefchange - The value ``pusher``, in which case the pusher's address (if available) will be used. - - The value ``author`` (meaningful only for replyToCommit), in which + - The value ``author`` (meaningful only for ``fromCommit``), in which case the commit author's address will be used. If config values are unset, the value of the From: header is @@ -396,14 +434,12 @@ multimailhook.fromRefchange 3. Use the value of multimailhook.envelopeSender. multimailhook.administrator - The name and/or email address of the administrator of the Git repository; used in FOOTER_TEMPLATE. Default is multimailhook.envelopesender if it is set; otherwise a generic string is used. multimailhook.emailPrefix - All emails have this string prepended to their subjects, to aid email filtering (though filtering based on the X-Git-* email headers is probably more robust). Default is the short name of @@ -411,16 +447,14 @@ multimailhook.emailPrefix value to the empty string to suppress the email prefix. multimailhook.emailMaxLines - The maximum number of lines that should be included in the body of a generated email. If not specified, there is no limit. Lines beyond the limit are suppressed and counted, and a final line is added indicating the number of suppressed lines. multimailhook.emailMaxLineLength - The maximum length of a line in the email body. Lines longer than - this limit are truncated to this length with a trailing `` [...]`` + this limit are truncated to this length with a trailing ``[...]`` added to indicate the missing text. The default is 500, because (a) diffs with longer lines are probably from binary files, for which a diff is useless, and (b) even if a text file has such long @@ -428,7 +462,6 @@ multimailhook.emailMaxLineLength truncation, set this option to 0. multimailhook.maxCommitEmails - The maximum number of commit emails to send for a given change. When the number of patches is larger that this value, only the summary refchange email is sent. This can avoid accidental @@ -436,14 +469,12 @@ multimailhook.maxCommitEmails emails limit, set this option to 0. The default is 500. multimailhook.emailStrictUTF8 - If this boolean option is set to `true`, then the main part of the email body is forced to be valid UTF-8. Any characters that are not valid UTF-8 are converted to the Unicode replacement character, U+FFFD. The default is `true`. multimailhook.diffOpts - Options passed to ``git diff-tree`` when generating the summary information for ReferenceChange emails. Default is ``--stat --summary --find-copies-harder``. Add -p to those options to @@ -452,7 +483,6 @@ multimailhook.diffOpts details. multimailhook.graphOpts - Options passed to ``git log --graph`` when generating graphs for the reference change summary emails (used only if refchangeShowGraph is true). The default is '--oneline --decorate'. @@ -460,7 +490,6 @@ multimailhook.graphOpts Shell quoting is allowed; see logOpts for details. multimailhook.logOpts - Options passed to ``git log`` to generate additional info for reference change emails (used only if refchangeShowLog is set). For example, adding -p will show each commit's complete diff. The @@ -479,7 +508,6 @@ multimailhook.logOpts logopts = --pretty=format:\"%h %aN <%aE>%n%s%n%n%b%n\" multimailhook.commitLogOpts - Options passed to ``git log`` to generate additional info for revision change emails. For example, adding --ignore-all-spaces will suppress whitespace changes. The default options are ``-C @@ -487,26 +515,21 @@ multimailhook.commitLogOpts multimailhook.logOpts for details. multimailhook.dateSubstitute - String to use as a substitute for ``Date:`` in the output of ``git log`` while formatting commit messages. This is usefull to avoid emitting a line that can be interpreted by mailers as the start of a cited message (Zimbra webmail in particular). Defaults to - ``CommitDate: ``. Set to an empty string or ``none`` to deactivate + ``CommitDate:``. Set to an empty string or ``none`` to deactivate the behavior. multimailhook.emailDomain - Domain name appended to the username of the person doing the push to convert it into an email address (via ``"%s@%s" % (username, emaildomain)``). More complicated schemes can be implemented by overriding Environment and overriding its get_pusher_email() method. -multimailhook.replyTo -multimailhook.replyToCommit -multimailhook.replyToRefchange - +multimailhook.replyTo, multimailhook.replyToCommit, multimailhook.replyToRefchange Addresses to use in the Reply-To: field for commit emails (replyToCommit) and refchange emails (replyToRefchange). multimailhook.replyTo is used as default when replyToCommit or @@ -519,32 +542,24 @@ multimailhook.replyToRefchange commit emails. multimailhook.quiet - Do not output the list of email recipients from the hook multimailhook.stdout - For debugging, send emails to stdout rather than to the mailer. Equivalent to the --stdout command line option multimailhook.scanCommitForCc - If this option is set to true, than recipients from lines in commit body that starts with ``CC:`` will be added to CC list. Default: false multimailhook.combineWhenSingleCommit - If this option is set to true and a single new commit is pushed to a branch, combine the summary and commit email messages into a single email. Default: true -multimailhook.refFilterInclusionRegex -multimailhook.refFilterExclusionRegex -multimailhook.refFilterDoSendRegex -multimailhook.refFilterDontSendRegex - +multimailhook.refFilterInclusionRegex, multimailhook.refFilterExclusionRegex, multimailhook.refFilterDoSendRegex, multimailhook.refFilterDontSendRegex **Warning:** these options are experimental. They should work, but the user-interface is not stable yet (in particular, the option names may change). If you want to participate in stabilizing the @@ -626,14 +641,16 @@ git-multimail is mostly customized via an "environment" that describes the local environment in which Git is running. Two types of environment are built in: -* GenericEnvironment: a stand-alone Git repository. +GenericEnvironment + a stand-alone Git repository. -* GitoliteEnvironment: a Git repository that is managed by gitolite - [3]_. For such repositories, the identity of the pusher is read from - environment variable $GL_USER, the name of the repository is read - from $GL_REPO (if it is not overridden by multimailhook.reponame), - and the From: header value is optionally read from gitolite.conf - (see multimailhook.from). +GitoliteEnvironment + a Git repository that is managed by gitolite + [3]_. For such repositories, the identity of the pusher is read from + environment variable $GL_USER, the name of the repository is read + from $GL_REPO (if it is not overridden by multimailhook.reponame), + and the From: header value is optionally read from gitolite.conf + (see multimailhook.from). By default, git-multimail assumes GitoliteEnvironment if $GL_USER and $GL_REPO are set, and otherwise assumes GenericEnvironment. |