diff options
Diffstat (limited to 'contrib/fast-import/git-p4')
| -rwxr-xr-x | contrib/fast-import/git-p4 | 420 |
1 files changed, 325 insertions, 95 deletions
diff --git a/contrib/fast-import/git-p4 b/contrib/fast-import/git-p4 index b975d67..3e1aa27 100755 --- a/contrib/fast-import/git-p4 +++ b/contrib/fast-import/git-p4 @@ -53,9 +53,10 @@ def p4_build_cmd(cmd): def chdir(dir): # P4 uses the PWD environment variable rather than getcwd(). Since we're - # not using the shell, we have to set it ourselves. - os.environ['PWD']=dir + # not using the shell, we have to set it ourselves. This path could + # be relative, so go there first, then figure out where we ended up. os.chdir(dir) + os.environ['PWD'] = os.getcwd() def die(msg): if verbose: @@ -361,6 +362,11 @@ def isValidGitDir(path): def parseRevision(ref): return read_pipe("git rev-parse %s" % ref).strip() +def branchExists(ref): + rev = read_pipe(["git", "rev-parse", "-q", "--verify", ref], + ignore_error=True) + return len(rev) > 0 + def extractLogMessageFromGitCommit(commit): logMessage = "" @@ -847,6 +853,41 @@ class P4Submit(Command, P4UserMap): return template + def edit_template(self, template_file): + """Invoke the editor to let the user change the submission + message. Return true if okay to continue with the submit.""" + + # if configured to skip the editing part, just submit + if gitConfig("git-p4.skipSubmitEdit") == "true": + return True + + # look at the modification time, to check later if the user saved + # the file + mtime = os.stat(template_file).st_mtime + + # invoke the editor + if os.environ.has_key("P4EDITOR"): + editor = os.environ.get("P4EDITOR") + else: + editor = read_pipe("git var GIT_EDITOR").strip() + system(editor + " " + template_file) + + # If the file was not saved, prompt to see if this patch should + # be skipped. But skip this verification step if configured so. + if gitConfig("git-p4.skipSubmitEditCheck") == "true": + return True + + # modification time updated means user saved the file + if os.stat(template_file).st_mtime > mtime: + return True + + while True: + response = raw_input("Submit template unchanged. Submit anyway? [y]es, [n]o (skip this patch) ") + if response == 'y': + return True + if response == 'n': + return False + def applyCommit(self, id): print "Applying %s" % (read_pipe("git log --max-count=1 --pretty=oneline %s" % id)) @@ -1001,7 +1042,7 @@ class P4Submit(Command, P4UserMap): separatorLine = "######## everything below this line is just the diff #######\n" - [handle, fileName] = tempfile.mkstemp() + (handle, fileName) = tempfile.mkstemp() tmpFile = os.fdopen(handle, "w+") if self.isWindows: submitTemplate = submitTemplate.replace("\n", "\r\n") @@ -1009,25 +1050,9 @@ class P4Submit(Command, P4UserMap): newdiff = newdiff.replace("\n", "\r\n") tmpFile.write(submitTemplate + separatorLine + diff + newdiff) tmpFile.close() - mtime = os.stat(fileName).st_mtime - if os.environ.has_key("P4EDITOR"): - editor = os.environ.get("P4EDITOR") - else: - editor = read_pipe("git var GIT_EDITOR").strip() - system(editor + " " + fileName) - - if gitConfig("git-p4.skipSubmitEditCheck") == "true": - checkModTime = False - else: - checkModTime = True - response = "y" - if checkModTime and (os.stat(fileName).st_mtime <= mtime): - response = "x" - while response != "y" and response != "n": - response = raw_input("Submit template unchanged. Submit anyway? [y]es, [n]o (skip this patch) ") - - if response == "y": + if self.edit_template(fileName): + # read the edited message and submit tmpFile = open(fileName, "rb") message = tmpFile.read() tmpFile.close() @@ -1039,11 +1064,13 @@ class P4Submit(Command, P4UserMap): if self.preserveUser: if p4User: # Get last changelist number. Cannot easily get it from - # the submit command output as the output is unmarshalled. + # the submit command output as the output is + # unmarshalled. changelist = self.lastP4Changelist() self.modifyChangelistUser(changelist, p4User) - else: + # skip this patch + print "Submission cancelled, undoing p4 changes." for f in editedFiles: p4_revert(f) for f in filesToAdd: @@ -1067,6 +1094,8 @@ class P4Submit(Command, P4UserMap): die("Detecting current git branch failed!") elif len(args) == 1: self.master = args[0] + if not branchExists(self.master): + die("Branch %s does not exist" % self.master) else: return False @@ -1099,6 +1128,10 @@ class P4Submit(Command, P4UserMap): print "Perforce checkout for depot path %s located at %s" % (self.depotPath, self.clientPath) self.oldWorkingDirectory = os.getcwd() + # ensure the clientPath exists + if not os.path.exists(self.clientPath): + os.makedirs(self.clientPath) + chdir(self.clientPath) print "Synchronizing p4 checkout..." p4_sync("...") @@ -1136,6 +1169,218 @@ class P4Submit(Command, P4UserMap): return True +class View(object): + """Represent a p4 view ("p4 help views"), and map files in a + repo according to the view.""" + + class Path(object): + """A depot or client path, possibly containing wildcards. + The only one supported is ... at the end, currently. + Initialize with the full path, with //depot or //client.""" + + def __init__(self, path, is_depot): + self.path = path + self.is_depot = is_depot + self.find_wildcards() + # remember the prefix bit, useful for relative mappings + m = re.match("(//[^/]+/)", self.path) + if not m: + die("Path %s does not start with //prefix/" % self.path) + prefix = m.group(1) + if not self.is_depot: + # strip //client/ on client paths + self.path = self.path[len(prefix):] + + def find_wildcards(self): + """Make sure wildcards are valid, and set up internal + variables.""" + + self.ends_triple_dot = False + # There are three wildcards allowed in p4 views + # (see "p4 help views"). This code knows how to + # handle "..." (only at the end), but cannot deal with + # "%%n" or "*". Only check the depot_side, as p4 should + # validate that the client_side matches too. + if re.search(r'%%[1-9]', self.path): + die("Can't handle %%n wildcards in view: %s" % self.path) + if self.path.find("*") >= 0: + die("Can't handle * wildcards in view: %s" % self.path) + triple_dot_index = self.path.find("...") + if triple_dot_index >= 0: + if not self.path.endswith("..."): + die("Can handle ... wildcard only at end of path: %s" % + self.path) + self.ends_triple_dot = True + + def ensure_compatible(self, other_path): + """Make sure the wildcards agree.""" + if self.ends_triple_dot != other_path.ends_triple_dot: + die("Both paths must end with ... if either does;\n" + + "paths: %s %s" % (self.path, other_path.path)) + + def match_wildcards(self, test_path): + """See if this test_path matches us, and fill in the value + of the wildcards if so. Returns a tuple of + (True|False, wildcards[]). For now, only the ... at end + is supported, so at most one wildcard.""" + if self.ends_triple_dot: + dotless = self.path[:-3] + if test_path.startswith(dotless): + wildcard = test_path[len(dotless):] + return (True, [ wildcard ]) + else: + if test_path == self.path: + return (True, []) + return (False, []) + + def match(self, test_path): + """Just return if it matches; don't bother with the wildcards.""" + b, _ = self.match_wildcards(test_path) + return b + + def fill_in_wildcards(self, wildcards): + """Return the relative path, with the wildcards filled in + if there are any.""" + if self.ends_triple_dot: + return self.path[:-3] + wildcards[0] + else: + return self.path + + class Mapping(object): + def __init__(self, depot_side, client_side, overlay, exclude): + # depot_side is without the trailing /... if it had one + self.depot_side = View.Path(depot_side, is_depot=True) + self.client_side = View.Path(client_side, is_depot=False) + self.overlay = overlay # started with "+" + self.exclude = exclude # started with "-" + assert not (self.overlay and self.exclude) + self.depot_side.ensure_compatible(self.client_side) + + def __str__(self): + c = " " + if self.overlay: + c = "+" + if self.exclude: + c = "-" + return "View.Mapping: %s%s -> %s" % \ + (c, self.depot_side, self.client_side) + + def map_depot_to_client(self, depot_path): + """Calculate the client path if using this mapping on the + given depot path; does not consider the effect of other + mappings in a view. Even excluded mappings are returned.""" + matches, wildcards = self.depot_side.match_wildcards(depot_path) + if not matches: + return "" + client_path = self.client_side.fill_in_wildcards(wildcards) + return client_path + + # + # View methods + # + def __init__(self): + self.mappings = [] + + def append(self, view_line): + """Parse a view line, splitting it into depot and client + sides. Append to self.mappings, preserving order.""" + + # Split the view line into exactly two words. P4 enforces + # structure on these lines that simplifies this quite a bit. + # + # Either or both words may be double-quoted. + # Single quotes do not matter. + # Double-quote marks cannot occur inside the words. + # A + or - prefix is also inside the quotes. + # There are no quotes unless they contain a space. + # The line is already white-space stripped. + # The two words are separated by a single space. + # + if view_line[0] == '"': + # First word is double quoted. Find its end. + close_quote_index = view_line.find('"', 1) + if close_quote_index <= 0: + die("No first-word closing quote found: %s" % view_line) + depot_side = view_line[1:close_quote_index] + # skip closing quote and space + rhs_index = close_quote_index + 1 + 1 + else: + space_index = view_line.find(" ") + if space_index <= 0: + die("No word-splitting space found: %s" % view_line) + depot_side = view_line[0:space_index] + rhs_index = space_index + 1 + + if view_line[rhs_index] == '"': + # Second word is double quoted. Make sure there is a + # double quote at the end too. + if not view_line.endswith('"'): + die("View line with rhs quote should end with one: %s" % + view_line) + # skip the quotes + client_side = view_line[rhs_index+1:-1] + else: + client_side = view_line[rhs_index:] + + # prefix + means overlay on previous mapping + overlay = False + if depot_side.startswith("+"): + overlay = True + depot_side = depot_side[1:] + + # prefix - means exclude this path + exclude = False + if depot_side.startswith("-"): + exclude = True + depot_side = depot_side[1:] + + m = View.Mapping(depot_side, client_side, overlay, exclude) + self.mappings.append(m) + + def map_in_client(self, depot_path): + """Return the relative location in the client where this + depot file should live. Returns "" if the file should + not be mapped in the client.""" + + paths_filled = [] + client_path = "" + + # look at later entries first + for m in self.mappings[::-1]: + + # see where will this path end up in the client + p = m.map_depot_to_client(depot_path) + + if p == "": + # Depot path does not belong in client. Must remember + # this, as previous items should not cause files to + # exist in this path either. Remember that the list is + # being walked from the end, which has higher precedence. + # Overlap mappings do not exclude previous mappings. + if not m.overlay: + paths_filled.append(m.client_side) + + else: + # This mapping matched; no need to search any further. + # But, the mapping could be rejected if the client path + # has already been claimed by an earlier mapping. + already_mapped_in_client = False + for f in paths_filled: + # this is View.Path.match + if f.match(p): + already_mapped_in_client = True + break + if not already_mapped_in_client: + # Include this file, unless it is from a line that + # explicitly said to exclude it. + if not m.exclude: + client_path = p + + # a match, even if rejected, always stops the search + break + + return client_path + class P4Sync(Command, P4UserMap): delete_actions = ( "delete", "move/delete", "purge" ) @@ -1183,7 +1428,7 @@ class P4Sync(Command, P4UserMap): self.p4BranchesInGit = [] self.cloneExclude = [] self.useClientSpec = False - self.clientSpecDirs = [] + self.clientSpecDirs = None if gitConfig("git-p4.syncFromOrigin") == "false": self.syncWithOrigin = False @@ -1234,20 +1479,7 @@ class P4Sync(Command, P4UserMap): def stripRepoPath(self, path, prefixes): if self.useClientSpec: - - # if using the client spec, we use the output directory - # specified in the client. For example, a view - # //depot/foo/branch/... //client/branch/foo/... - # will end up putting all foo/branch files into - # branch/foo/ - for val in self.clientSpecDirs: - if path.startswith(val[0]): - # replace the depot path with the client path - path = path.replace(val[0], val[1][1]) - # now strip out the client (//client/...) - path = re.sub("^(//[^/]+/)", '', path) - # the rest is all path - return path + return self.clientSpecDirs.map_in_client(path) if self.keepRepoPath: prefixes = [re.sub("^(//[^/]+/).*", r'\1', prefixes[0])] @@ -1397,19 +1629,17 @@ class P4Sync(Command, P4UserMap): filesToDelete = [] for f in files: - includeFile = True - for val in self.clientSpecDirs: - if f['path'].startswith(val[0]): - if val[1][0] <= 0: - includeFile = False - break + # if using a client spec, only add the files that have + # a path in the client + if self.clientSpecDirs: + if self.clientSpecDirs.map_in_client(f['path']) == "": + continue - if includeFile: - filesForCommit.append(f) - if f['action'] in self.delete_actions: - filesToDelete.append(f) - else: - filesToRead.append(f) + filesForCommit.append(f) + if f['action'] in self.delete_actions: + filesToDelete.append(f) + else: + filesToRead.append(f) # deleted files... for f in filesToDelete: @@ -1848,50 +2078,31 @@ class P4Sync(Command, P4UserMap): def getClientSpec(self): - specList = p4CmdList( "client -o" ) - temp = {} - for entry in specList: - for k,v in entry.iteritems(): - if k.startswith("View"): - - # p4 has these %%1 to %%9 arguments in specs to - # reorder paths; which we can't handle (yet :) - if re.match('%%\d', v) != None: - print "Sorry, can't handle %%n arguments in client specs" - sys.exit(1) - - if v.startswith('"'): - start = 1 - else: - start = 0 - index = v.find("...") - - # save the "client view"; i.e the RHS of the view - # line that tells the client where to put the - # files for this view. - cv = v[index+3:].strip() # +3 to remove previous '...' - - # if the client view doesn't end with a - # ... wildcard, then we're going to mess up the - # output directory, so fail gracefully. - if not cv.endswith('...'): - print 'Sorry, client view in "%s" needs to end with wildcard' % (k) - sys.exit(1) - cv=cv[:-3] - - # now save the view; +index means included, -index - # means it should be filtered out. - v = v[start:index] - if v.startswith("-"): - v = v[1:] - include = -len(v) - else: - include = len(v) + specList = p4CmdList("client -o") + if len(specList) != 1: + die('Output from "client -o" is %d lines, expecting 1' % + len(specList)) + + # dictionary of all client parameters + entry = specList[0] + + # just the keys that start with "View" + view_keys = [ k for k in entry.keys() if k.startswith("View") ] - temp[v] = (include, cv) + # hold this new View + view = View() - self.clientSpecDirs = temp.items() - self.clientSpecDirs.sort( lambda x, y: abs( y[1][0] ) - abs( x[1][0] ) ) + # append the lines, in order, to the view + for view_num in range(len(view_keys)): + k = "View%d" % view_num + if k not in view_keys: + die("Expected view key %s missing" % k) + view.append(entry[k]) + + self.clientSpecDirs = view + if self.verbose: + for i, m in enumerate(self.clientSpecDirs.mappings): + print "clientSpecDirs %d: %s" % (i, str(m)) def run(self, args): self.depotPaths = [] @@ -1925,7 +2136,10 @@ class P4Sync(Command, P4UserMap): if not gitBranchExists(self.refPrefix + "HEAD") and self.importIntoRemotes and gitBranchExists(self.branch): system("git symbolic-ref %sHEAD %s" % (self.refPrefix, self.branch)) - if self.useClientSpec or gitConfig("git-p4.useclientspec") == "true": + if not self.useClientSpec: + if gitConfig("git-p4.useclientspec", "--bool") == "true": + self.useClientSpec = True + if self.useClientSpec: self.getClientSpec() # TODO: should always look at previous commits, @@ -1998,6 +2212,17 @@ class P4Sync(Command, P4UserMap): revision = "" self.users = {} + # Make sure no revision specifiers are used when --changesfile + # is specified. + bad_changesfile = False + if len(self.changesFile) > 0: + for p in self.depotPaths: + if p.find("@") >= 0 or p.find("#") >= 0: + bad_changesfile = True + break + if bad_changesfile: + die("Option --changesfile is incompatible with revision specifiers") + newPaths = [] for p in self.depotPaths: if p.find("@") != -1: @@ -2014,7 +2239,10 @@ class P4Sync(Command, P4UserMap): revision = p[hashIdx:] p = p[:hashIdx] elif self.previousDepotPaths == []: - revision = "#head" + # pay attention to changesfile, if given, else import + # the entire p4 tree at the head revision + if len(self.changesFile) == 0: + revision = "#head" p = re.sub ("\.\.\.$", "", p) if not p.endswith("/"): @@ -2309,7 +2537,8 @@ def main(): args = sys.argv[2:] if len(options) > 0: - options.append(optparse.make_option("--git-dir", dest="gitdir")) + if cmd.needsGit: + options.append(optparse.make_option("--git-dir", dest="gitdir")) parser = optparse.OptionParser(cmd.usage.replace("%prog", "%prog " + cmdName), options, @@ -2339,6 +2568,7 @@ def main(): if not cmd.run(args): parser.print_help() + sys.exit(2) if __name__ == '__main__': |