diff options
Diffstat (limited to 'Documentation')
52 files changed, 946 insertions, 267 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index 4cd95da..a4191aa 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -206,11 +206,38 @@ For C programs: x = 1; } - is frowned upon. A gray area is when the statement extends - over a few lines, and/or you have a lengthy comment atop of - it. Also, like in the Linux kernel, if there is a long list - of "else if" statements, it can make sense to add braces to - single line blocks. + is frowned upon. But there are a few exceptions: + + - When the statement extends over a few lines (e.g., a while loop + with an embedded conditional, or a comment). E.g.: + + while (foo) { + if (x) + one(); + else + two(); + } + + if (foo) { + /* + * This one requires some explanation, + * so we're better off with braces to make + * it obvious that the indentation is correct. + */ + doit(); + } + + - When there are multiple arms to a conditional and some of them + require braces, enclose even a single line block in braces for + consistency. E.g.: + + if (foo) { + doit(); + } else { + one(); + two(); + three(); + } - We try to avoid assignments in the condition of an "if" statement. diff --git a/Documentation/Makefile b/Documentation/Makefile index b43d66e..b5be2e2 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -120,6 +120,7 @@ INSTALL_INFO = install-info DOCBOOK2X_TEXI = docbook2x-texi DBLATEX = dblatex ASCIIDOC_DBLATEX_DIR = /etc/asciidoc/dblatex +DBLATEX_COMMON = -p $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.xsl -s $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.sty ifndef PERL_PATH PERL_PATH = /usr/bin/perl endif @@ -173,6 +174,16 @@ ifdef GNU_ROFF XMLTO_EXTRA += -m manpage-quote-apos.xsl endif +ifdef USE_ASCIIDOCTOR +ASCIIDOC = asciidoctor +ASCIIDOC_CONF = +ASCIIDOC_HTML = xhtml5 +ASCIIDOC_DOCBOOK = docbook45 +ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions +ASCIIDOC_EXTRA += -alitdd='&\#x2d;&\#x2d;' +DBLATEX_COMMON = +endif + SHELL_PATH ?= $(SHELL) # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) @@ -337,7 +348,7 @@ manpage-base-url.xsl: manpage-base-url.xsl.in user-manual.xml: user-manual.txt user-manual.conf $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ - $(TXT_TO_XML) -d article -o $@+ $< && \ + $(TXT_TO_XML) -d book -o $@+ $< && \ mv $@+ $@ technical/api-index.txt: technical/api-index-skel.txt \ @@ -368,13 +379,14 @@ user-manual.texi: user-manual.xml user-manual.pdf: user-manual.xml $(QUIET_DBLATEX)$(RM) $@+ $@ && \ - $(DBLATEX) -o $@+ -p $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.xsl -s $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.sty $< && \ + $(DBLATEX) -o $@+ $(DBLATEX_COMMON) $< && \ mv $@+ $@ -gitman.texi: $(MAN_XML) cat-texi.perl +gitman.texi: $(MAN_XML) cat-texi.perl texi.xsl $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ - ($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \ - --to-stdout $(xml) &&) true) > $@++ && \ + ($(foreach xml,$(sort $(MAN_XML)),xsltproc -o $(xml)+ texi.xsl $(xml) && \ + $(DOCBOOK2X_TEXI) --encoding=UTF-8 --to-stdout $(xml)+ && \ + rm $(xml)+ &&) true) > $@++ && \ $(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \ rm $@++ && \ mv $@+ $@ diff --git a/Documentation/RelNotes/2.11.1.txt b/Documentation/RelNotes/2.11.1.txt new file mode 100644 index 0000000..9cd14c8 --- /dev/null +++ b/Documentation/RelNotes/2.11.1.txt @@ -0,0 +1,168 @@ +Git v2.11.1 Release Notes +========================= + +Fixes since v2.11 +----------------- + + * The default Travis-CI configuration specifies newer P4 and GitLFS. + + * The character width table has been updated to match Unicode 9.0 + + * Update the isatty() emulation for Windows by updating the previous + hack that depended on internals of (older) MSVC runtime. + + * "git rev-parse --symbolic" failed with a more recent notation like + "HEAD^-1" and "HEAD^!". + + * An empty directory in a working tree that can simply be nuked used + to interfere while merging or cherry-picking a change to create a + submodule directory there, which has been fixed.. + + * The code in "git push" to compute if any commit being pushed in the + superproject binds a commit in a submodule that hasn't been pushed + out was overly inefficient, making it unusable even for a small + project that does not have any submodule but have a reasonable + number of refs. + + * "git push --dry-run --recurse-submodule=on-demand" wasn't + "--dry-run" in the submodules. + + * The output from "git worktree list" was made in readdir() order, + and was unstable. + + * mergetool.<tool>.trustExitCode configuration variable did not apply + to built-in tools, but now it does. + + * "git p4" LFS support was broken when LFS stores an empty blob. + + * Fix a corner case in merge-recursive regression that crept in + during 2.10 development cycle. + + * Update the error messages from the dumb-http client when it fails + to obtain loose objects; we used to give sensible error message + only upon 404 but we now forbid unexpected redirects that needs to + be reported with something sensible. + + * When diff.renames configuration is on (and with Git 2.9 and later, + it is enabled by default, which made it worse), "git stash" + misbehaved if a file is removed and another file with a very + similar content is added. + + * "git diff --no-index" did not take "--no-abbrev" option. + + * "git difftool --dir-diff" had a minor regression when started from + a subdirectory, which has been fixed. + + * "git commit --allow-empty --only" (no pathspec) with dirty index + ought to be an acceptable way to create a new commit that does not + change any paths, but it was forbidden, perhaps because nobody + needed it so far. + + * A pathname that begins with "//" or "\\" on Windows is special but + path normalization logic was unaware of it. + + * "git pull --rebase", when there is no new commits on our side since + we forked from the upstream, should be able to fast-forward without + invoking "git rebase", but it didn't. + + * The way to specify hotkeys to "xxdiff" that is used by "git + mergetool" has been modernized to match recent versions of xxdiff. + + * Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back + to where cherry-pick started while picking multiple changes, when + the cherry-pick stopped to ask for help from the user, and the user + did "git reset --hard" to a different commit in order to re-attempt + the operation. + + * Code cleanup in shallow boundary computation. + + * A recent update to receive-pack to make it easier to drop garbage + objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot + have a pathname with a colon in it (no surprise!), and this in turn + made it impossible to push into a repository at such a path. This + has been fixed by introducing a quoting mechanism used when + appending such a path to the colon-separated list. + + * The function usage_msg_opt() has been updated to say "fatal:" + before the custom message programs give, when they want to die + with a message about wrong command line options followed by the + standard usage string. + + * "git index-pack --stdin" needs an access to an existing repository, + but "git index-pack file.pack" to generate an .idx file that + corresponds to a packfile does not. + + * Fix for NDEBUG builds. + + * A lazy "git push" without refspec did not internally use a fully + specified refspec to perform 'current', 'simple', or 'upstream' + push, causing unnecessary "ambiguous ref" errors. + + * "git p4" misbehaved when swapping a directory and a symbolic link. + + * Even though an fix was attempted in Git 2.9.3 days, but running + "git difftool --dir-diff" from a subdirectory never worked. This + has been fixed. + + * "git p4" that tracks multile p4 paths imported a single changelist + that touches files in these multiple paths as one commit, followed + by many empty commits. This has been fixed. + + * A potential but unlikely buffer overflow in Windows port has been + fixed. + + * When the http server gives an incomplete response to a smart-http + rpc call, it could lead to client waiting for a full response that + will never come. Teach the client side to notice this condition + and abort the transfer. + + * Some platforms no longer understand "latin-1" that is still seen in + the wild in e-mail headers; replace them with "iso-8859-1" that is + more widely known when conversion fails from/to it. + + * Update the procedure to generate "tags" for developer support. + + * Update the definition of the MacOSX test environment used by + TravisCI. + + * A few git-svn updates. + + * Compression setting for producing packfiles were spread across + three codepaths, one of which did not honor any configuration. + Unify these so that all of them honor core.compression and + pack.compression variables the same way. + + * "git fast-import" sometimes mishandled while rebalancing notes + tree, which has been fixed. + + * Recent update to the default abbreviation length that auto-scales + lacked documentation update, which has been corrected. + + * Leakage of lockfiles in the config subsystem has been fixed. + + * It is natural that "git gc --auto" may not attempt to pack + everything into a single pack, and there is no point in warning + when the user has configured the system to use the pack bitmap, + leading to disabling further "gc". + + * "git archive" did not read the standard configuration files, and + failed to notice a file that is marked as binary via the userdiff + driver configuration. + + * "git blame --porcelain" misidentified the "previous" <commit, path> + pair (aka "source") when contents came from two or more files. + + * "git rebase -i" with a recent update started showing an incorrect + count when squashing more than 10 commits. + + * "git <cmd> @{push}" on a detached HEAD used to segfault; it has + been corrected to error out with a message. + + * Tighten a test to avoid mistaking an extended ERE regexp engine as + a PRE regexp engine. + + * Typing ^C to pager, which usually does not kill it, killed Git and + took the pager down as a collateral damage in certain process-tree + structure. This has been fixed. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.12.0.txt b/Documentation/RelNotes/2.12.0.txt index 2a19064..2915480 100644 --- a/Documentation/RelNotes/2.12.0.txt +++ b/Documentation/RelNotes/2.12.0.txt @@ -11,8 +11,10 @@ Backward compatibility notes. is not scheduled to happen in the upcoming release (yet). * The historical argument order "git merge <msg> HEAD <commit>..." - has been deprecated for quite some time, and will be removed in the - upcoming release. + has been deprecated for quite some time, and will be removed in a + future release. + + * An ancient script "git relink" has been removed. Updates since v2.11 @@ -64,7 +66,73 @@ UI, Workflows & Features * Some platforms no longer understand "latin-1" that is still seen in the wild in e-mail headers; replace them with "iso-8859-1" that is more widely known when conversion fails from/to it. - (merge df3755888b jc/latin-1 later to maint). + + * "git grep" has been taught to optionally recurse into submodules. + + * "git rm" used to refuse to remove a submodule when it has its own + git repository embedded in its working tree. It learned to move + the repository away to $GIT_DIR/modules/ of the superproject + instead, and allow the submodule to be deleted (as long as there + will be no loss of local modifications, that is). + + * A recent updates to "git p4" was not usable for older p4 but it + could be made to work with minimum changes. Do so. + + * "git diff" learned diff.interHunkContext configuration variable + that gives the default value for its --inter-hunk-context option. + + * The prereleaseSuffix feature of version comparison that is used in + "git tag -l" did not correctly when two or more prereleases for the + same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2 + are there and the code needs to compare 2.0-beta1 and 2.0-beta2). + + * "git submodule push" learned "--recurse-submodules=only option to + push submodules out without pushing the top-level superproject. + + * "git tag" and "git verify-tag" learned to put GPG verification + status in their "--format=<placeholders>" output format. + + * An ancient repository conversion tool left in contrib/ has been + removed. + + * "git show-ref HEAD" used with "--verify" because the user is not + interested in seeing refs/remotes/origin/HEAD, and used with + "--head" because the user does not want HEAD to be filtered out, + i.e. "git show-ref --head --verify HEAD", did not work as expected. + + * "git submodule add" used to be confused and refused to add a + locally created repository; users can now use "--force" option + to add them. + (merge 619acfc78c sb/submodule-add-force later to maint). + + * Some people feel the default set of colors used by "git log --graph" + rather limiting. A mechanism to customize the set of colors has + been introduced. + + * "git read-tree" and its underlying unpack_trees() machinery learned + to report problematic paths prefixed with the --super-prefix option. + + * When a submodule "A", which has another submodule "B" nested within + it, is "absorbed" into the top-level superproject, the inner + submodule "B" used to be left in a strange state. The logic to + adjust the .git pointers in these submodules has been corrected. + + * The user can specify a custom update method that is run when + "submodule update" updates an already checked out submodule. This + was ignored when checking the submodule out for the first time and + we instead always just checked out the commit that is bound to the + path in the superproject's index. + + * The command line completion (in contrib/) learned that + "git diff --submodule=" can take "diff" as a recently added option. + + * The "core.logAllRefUpdates" that used to be boolean has been + enhanced to take 'always' as well, to record ref updates to refs + other than the ones that are expected to be updated (i.e. branches, + remote-tracking branches and notes). + + * Comes with more command line completion (in contrib/) for recently + introduced options. Performance, Internal Implementation, Development Support etc. @@ -75,32 +143,55 @@ Performance, Internal Implementation, Development Support etc. code with "git interpret-trailer". * The default Travis-CI configuration specifies newer P4 and GitLFS. - (merge 5f703e8f02 ls/travis-update-p4-and-lfs later to maint). * The "fast hash" that had disastrous performance issues in some corner cases has been retired from the internal diff. * The character width table has been updated to match Unicode 9.0 - (merge 9e6e9aefdf bb/unicode-9.0 later to maint). * Update the procedure to generate "tags" for developer support. - (merge 046e4c1c09 jk/make-tags-find-sources-tweak later to maint). * The codeflow of setting NOATIME and CLOEXEC on file descriptors Git opens has been simplified. - (merge b4d065df03 jc/git-open-cloexec later to maint). * "git diff" and its family had two experimental heuristics to shift the contents of a hunk to make the patch easier to read. One of them turns out to be better than the other, so leave only the "--indent-heuristic" option and remove the other one. - (merge 3cde4e02ee jc/retire-compaction-heuristics later to maint). * A new submodule helper "git submodule embedgitdirs" to make it easier to move embedded .git/ directory for submodules in a superproject to .git/modules/ (and point the latter with the former that is turned into a "gitdir:" file) has been added. + * "git push \\server\share\dir" has recently regressed and then + fixed. A test has retroactively been added for this breakage. + + * Build updates for Cygwin. + + * The implementation of "real_path()" was to go there with chdir(2) + and call getcwd(3), but this obviously wouldn't be usable in a + threaded environment. Rewrite it to manually resolve relative + paths including symbolic links in path components. + + * Adjust documentation to help AsciiDoctor render better while not + breaking the rendering done by AsciiDoc. + + * The sequencer machinery has been further enhanced so that a later + set of patches can start using it to reimplement "rebase -i". + + * Update the definition of the MacOSX test environment used by + TravisCI. + + * Rewrite a scripted porcelain "git difftool" in C. + + * "make -C t failed" will now run only the tests that failed in the + previous run. This is usable only when prove is not use, and gives + a useless error message when run after "make clean", but otherwise + is serviceable. + + * "uchar [40]" to "struct object_id" conversion continues. + Also contains various documentation updates and code clean-ups. @@ -115,78 +206,62 @@ notes for details). standard I/O streams are connected to a TTY, but isatty() that comes with Windows incorrectly returned true if it is used on NUL (i.e. an equivalent to /dev/null). This has been fixed. - (merge cbb3f3c9b1 js/mingw-isatty later to maint). * "git svn" did not work well with path components that are "0", and some configuration variable it uses were not documented. - (merge ea9a93dcc2 ew/svn-fixes later to maint). * "git rev-parse --symbolic" failed with a more recent notation like "HEAD^-1" and "HEAD^!". - (merge a2e7b04c44 jk/rev-parse-symbolic-parents-fix later to maint). * An empty directory in a working tree that can simply be nuked used to interfere while merging or cherry-picking a change to create a submodule directory there, which has been fixed.. - (merge 5423d2e700 dt/empty-submodule-in-merge later to maint). * The code in "git push" to compute if any commit being pushed in the superproject binds a commit in a submodule that hasn't been pushed out was overly inefficient, making it unusable even for a small project that does not have any submodule but have a reasonable number of refs. - (merge 250ab24ab3 hv/submodule-not-yet-pushed-fix later to maint). * "git push --dry-run --recurse-submodule=on-demand" wasn't "--dry-run" in the submodules. - (merge 0301c821c5 bw/push-dry-run later to maint). * The output from "git worktree list" was made in readdir() order, and was unstable. - (merge 4df1d4d466 nd/worktree-list-fixup later to maint). * mergetool.<tool>.trustExitCode configuration variable did not apply to built-in tools, but now it does. - (merge 2967284456 da/mergetool-trust-exit-code later to maint). * "git p4" LFS support was broken when LFS stores an empty blob. - (merge d5eb3cf5e7 ls/p4-empty-file-on-lfs later to maint). * A corner case in merge-recursive regression that crept in during 2.10 development cycle has been fixed. - (merge 1c25d2d8ed jc/renormalize-merge-kill-safer-crlf later to maint). * Transport with dumb http can be fooled into following foreign URLs that the end user does not intend to, especially with the server side redirects and http-alternates mechanism, which can lead to security issues. Tighten the redirection and make it more obvious to the end user when it happens. - (merge cb4d2d35c4 jk/http-walker-limit-redirect-2.9 later to maint). * Update the error messages from the dumb-http client when it fails to obtain loose objects; we used to give sensible error message only upon 404 but we now forbid unexpected redirects that needs to be reported with something sensible. - (merge 3680f16f9d jk/http-walker-limit-redirect later to maint). * When diff.renames configuration is on (and with Git 2.9 and later, it is enabled by default, which made it worse), "git stash" misbehaved if a file is removed and another file with a very similar content is added. - (merge 9d4e28ead5 jk/stash-disable-renames-internally later to maint). * "git diff --no-index" did not take "--no-abbrev" option. - (merge 43d1948b7b jb/diff-no-index-no-abbrev later to maint). * "git difftool --dir-diff" had a minor regression when started from a subdirectory, which has been fixed. - (merge 853e10c197 da/difftool-dir-diff-fix later to maint). * "git commit --allow-empty --only" (no pathspec) with dirty index ought to be an acceptable way to create a new commit that does not change any paths, but it was forbidden, perhaps because nobody needed it so far. - (merge beb635ca9c ak/commit-only-allow-empty later to maint). * Git 2.11 had a minor regression in "merge --ff-only" that competed with another process that simultanously attempted to update the @@ -196,26 +271,21 @@ notes for details). * A pathname that begins with "//" or "\\" on Windows is special but path normalization logic was unaware of it. - (merge 7814fbe3f1 js/normalize-path-copy-ceil later to maint). * "git pull --rebase", when there is no new commits on our side since we forked from the upstream, should be able to fast-forward without invoking "git rebase", but it didn't. - (merge 33b842a1e9 jc/pull-rebase-ff later to maint). * The way to specify hotkeys to "xxdiff" that is used by "git mergetool" has been modernized to match recent versions of xxdiff. - (merge 6cf5f6cef7 da/mergetool-xxdiff-hotkey later to maint). * Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back to where cherry-pick started while picking multiple changes, when the cherry-pick stopped to ask for help from the user, and the user did "git reset --hard" to a different commit in order to re-attempt the operation. - (merge ce73bb22d8 sb/sequencer-abort-safety later to maint). * Code cleanup in shallow boundary computation. - (merge 649b0c316a nd/shallow-fixup later to maint). * A recent update to receive-pack to make it easier to drop garbage objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot @@ -223,78 +293,208 @@ notes for details). made it impossible to push into a repository at such a path. This has been fixed by introducing a quoting mechanism used when appending such a path to the colon-separated list. - (merge 5e74824fac jk/quote-env-path-list-component later to maint). * The function usage_msg_opt() has been updated to say "fatal:" before the custom message programs give, when they want to die with a message about wrong command line options followed by the standard usage string. - (merge 87433261a4 jk/parseopt-usage-msg-opt later to maint). * "git index-pack --stdin" needs an access to an existing repository, but "git index-pack file.pack" to generate an .idx file that corresponds to a packfile does not. - (merge 29401e1575 jk/index-pack-wo-repo-from-stdin later to maint). * Fix for NDEBUG builds. - (merge 08414938a2 jt/mailinfo-fold-in-body-headers later to maint). * A lazy "git push" without refspec did not internally use a fully specified refspec to perform 'current', 'simple', or 'upstream' push, causing unnecessary "ambiguous ref" errors. - (merge b284495e93 jc/push-default-explicit later to maint). * "git p4" misbehaved when swapping a directory and a symbolic link. - (merge df8a9e86db ld/p4-compare-dir-vs-symlink later to maint). * Even though an fix was attempted in Git 2.9.3 days, but running "git difftool --dir-diff" from a subdirectory never worked. This has been fixed. - (merge ce6926974e jk/difftool-in-subdir later to maint). * "git p4" that tracks multile p4 paths imported a single changelist that touches files in these multiple paths as one commit, followed by many empty commits. This has been fixed. - (merge 9943e5b979 gv/p4-multi-path-commit-fix later to maint). * A potential but unlikely buffer overflow in Windows port has been fixed. - (merge c46458e82f mk/mingw-winansi-ttyname-termination-fix later to maint). * When the http server gives an incomplete response to a smart-http rpc call, it could lead to client waiting for a full response that will never come. Teach the client side to notice this condition and abort the transfer. - (merge f8edeaa05d dt/smart-http-detect-server-going-away later to maint). * Compression setting for producing packfiles were spread across three codepaths, one of which did not honor any configuration. Unify these so that all of them honor core.compression and pack.compression variables the same way. - (merge 8de7eeb54b jc/compression-config later to maint). * "git fast-import" sometimes mishandled while rebalancing notes tree, which has been fixed. - (merge 405d7f4af6 mh/fast-import-notes-fix-new later to maint). * Recent update to the default abbreviation length that auto-scales lacked documentation update, which has been corrected. - (merge 48d5014dd4 jc/abbrev-autoscale-config later to maint). * Leakage of lockfiles in the config subsystem has been fixed. - (merge c06fa62dfc nd/config-misc-fixes later to maint). + + * It is natural that "git gc --auto" may not attempt to pack + everything into a single pack, and there is no point in warning + when the user has configured the system to use the pack bitmap, + leading to disabling further "gc". + + * "git archive" did not read the standard configuration files, and + failed to notice a file that is marked as binary via the userdiff + driver configuration. + + * "git blame --porcelain" misidentified the "previous" <commit, path> + pair (aka "source") when contents came from two or more files. + + * "git rebase -i" with a recent update started showing an incorrect + count when squashing more than 10 commits. + + * "git <cmd> @{push}" on a detached HEAD used to segfault; it has + been corrected to error out with a message. + + * Running "git add a/b" when "a" is a submodule correctly errored + out, but without a meaningful error message. + (merge 2d81c48fa7 sb/pathspec-errors later to maint). + + * Typing ^C to pager, which usually does not kill it, killed Git and + took the pager down as a collateral damage in certain process-tree + structure. This has been fixed. + + * "git mergetool" without any pathspec on the command line that is + run from a subdirectory became no-op in Git v2.11 by mistake, which + has been fixed. + + * Retire long unused/unmaintained gitview from the contrib/ area. + (merge 3120925c25 sb/remove-gitview later to maint). + + * Tighten a test to avoid mistaking an extended ERE regexp engine as + a PRE regexp engine. + + * An error message with an ASCII control character like '\r' in it + can alter the message to hide its early part, which is problematic + when a remote side gives such an error message that the local side + will relay with a "remote: " prefix. + (merge f290089879 jk/vreport-sanitize later to maint). + + * "git fsck" inspects loose objects more carefully now. + (merge cce044df7f jk/loose-object-fsck later to maint). + + * A crashing bug introduced in v2.11 timeframe has been found (it is + triggerable only in fast-import) and fixed. + (merge abd5a00268 jk/clear-delta-base-cache-fix later to maint). + + * With an anticipatory tweak for remotes defined in ~/.gitconfig + (e.g. "remote.origin.prune" set to true, even though there may or + may not actually be "origin" remote defined in a particular Git + repository), "git remote rename" and other commands misinterpreted + and behaved as if such a non-existing remote actually existed. + (merge e459b073fb js/remote-rename-with-half-configured-remote later to maint). + + * A few codepaths had to rely on a global variable when sorting + elements of an array because sort(3) API does not allow extra data + to be passed to the comparison function. Use qsort_s() when + natively available, and a fallback implementation of it when not, + to eliminate the need, which is a prerequisite for making the + codepath reentrant. + + * "git fsck --connectivity-check" was not working at all. + (merge a2b22854bd jk/fsck-connectivity-check-fix later to maint). + + * After starting "git rebase -i", which first opens the user's editor + to edit the series of patches to apply, but before saving the + contents of that file, "git status" failed to show the current + state (i.e. you are in an interactive rebase session, but you have + applied no steps yet) correctly. + (merge df9ded4984 js/status-pre-rebase-i later to maint). + + * Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run + our tests but /usr/local/bin/unzip is usable. + (merge d98b2c5fce js/unzip-in-usr-bin-workaround later to maint). + + * "git p4" did not work well with multiple git-p4.mapUser entries on + Windows. + (merge c3c2b05776 gv/mingw-p4-mapuser later to maint). + + * "git help" enumerates executable files in $PATH; the implementation + of "is this file executable?" on Windows has been optimized. + (merge c755015f79 hv/mingw-help-is-executable later to maint). + + * Test tweaks for those who have default ACL in their git source tree + that interfere with the umask test. + (merge d549d21307 mm/reset-facl-before-umask-test later to maint). + + * Names of the various hook scripts must be spelled exactly, but on + Windows, an .exe binary must be named with .exe suffix; notice + $GIT_DIR/hooks/<hookname>.exe as a valid <hookname> hook. + (merge 235be51fbe js/mingw-hooks-with-exe-suffix later to maint). + + * Asciidoctor, an alternative reimplementation of AsciiDoc, still + needs some changes to work with documents meant to be formatted + with AsciiDoc. "make USE_ASCIIDOCTOR=YesPlease" to use it out of + the box to document our pages is getting closer to reality. + + * Correct command line completion (in contrib/) on "git svn" + (merge 2cbad17642 ew/complete-svn-authorship-options later to maint). + + * Incorrect usage help message for "git worktree prune" has been fixed. + (merge 2488dcab22 ps/worktree-prune-help-fix later to maint). + + * Adjust a perf test to new world order where commands that do + require a repository are really strict about having a repository. + (merge c86000c1a7 rs/p5302-create-repositories-before-tests later to maint). + + * "git log --graph" did not work well with "--name-only", even though + other forms of "diff" output were handled correctly. + (merge f5022b5fed jk/log-graph-name-only later to maint). + + * The push-options given via the "--push-options" option were not + passed through to external remote helpers such as "smart HTTP" that + are invoked via the transport helper. + + * The documentation explained what "git stash" does to the working + tree (after stashing away the local changes) in terms of "reset + --hard", which was exposing an unnecessary implementation detail. + (merge 20a7e06172 tg/stash-doc-cleanup later to maint). + + * When "git p4" imports changelist that removes paths, it failed to + convert pathnames when the p4 used encoding different from the one + used on the Git side. This has been corrected. + (merge a8b05162e8 ls/p4-path-encoding later to maint). + + * A new coccinelle rule that catches a check of !pointer before the + pointer is free(3)d, which most likely is a bug. + (merge ec6cd14c7a rs/cocci-check-free-only-null later to maint). + + * "ls-files" run with pathspec has been micro-optimized to avoid + having to memmove(3) unnecessary bytes. + (merge 96f6d3f61a rs/ls-files-partial-optim later to maint). + + * A hotfix for a topic already in 'master'. + (merge a4d92d579f js/mingw-isatty later to maint). * Other minor doc, test and build updates and code cleanups. - (merge fa6ca11105 nd/qsort-in-merge-recursive later to maint). - (merge fa3142c919 ak/lazy-prereq-mktemp later to maint). - (merge 9c48b4fb23 ls/t0021-fixup later to maint). - (merge 584f99c87b sb/unpack-trees-grammofix later to maint). - (merge 54471fdcc3 jk/readme-gmane-is-no-more later to maint). - (merge 9e189f1a5c sb/t3600-cleanup later to maint). - (merge e2c20be57c lr/doc-fix-cet later to maint). - (merge 47437fd3bd kh/tutorial-grammofix later to maint). (merge f2627d9b19 sb/submodule-config-cleanup later to maint). - (merge 7eeda8b821 ls/filter-process later to maint). - (merge 6cc823c5c1 jt/fetch-no-redundant-tag-fetch-map later to maint). - (merge 235ec24352 mm/push-social-engineering-attack-doc later to maint). - (merge f1350d0c12 mm/gc-safety-doc later to maint). + (merge 384f1a167b sb/unpack-trees-cleanup later to maint). + (merge 874444b704 rh/diff-orderfile-doc later to maint). + (merge eafd5d9483 cw/doc-sign-off later to maint). + (merge 0aaad415bc rs/absolute-pathdup later to maint). + (merge 4432dd6b5b rs/receive-pack-cleanup later to maint). + (merge 540a398e9c sg/mailmap-self later to maint). + (merge 209df269a6 nd/rev-list-all-includes-HEAD-doc later to maint). + (merge 941b9c5270 sb/doc-unify-bottom later to maint). + (merge 2aaf37b62c jk/doc-remote-helpers-markup-fix later to maint). + (merge e91461b332 jk/doc-submodule-markup-fix later to maint). + (merge 8ab9740d9f dp/submodule-doc-markup-fix later to maint). + (merge 0838cbc22f jk/tempfile-ferror-fclose-confusion later to maint). + (merge 115a40add6 dr/doc-check-ref-format-normalize later to maint). + (merge 133f0a299d gp/document-dotfiles-in-templates-are-not-copied later to maint). + (merge 2b35a9f4c7 bc/blame-doc-fix later to maint). + (merge 7e82388024 ps/doc-gc-aggressive-depth-update later to maint). + (merge 9993a7c5f1 bc/worktree-doc-fix-detached later to maint). + (merge e519eccdf4 rt/align-add-i-help-text later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 08352de..3faf7eb 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -216,12 +216,11 @@ that it will be postponed. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME, that is OK. -Do not PGP sign your patch, at least for now. Most likely, your -maintainer or other people on the list would not have your PGP -key and would not bother obtaining it anyway. Your patch is not -judged by who you are; a good patch from an unknown origin has a -far better chance of being accepted than a patch from a known, -respected origin that is done poorly or does incorrect things. +Do not PGP sign your patch. Most likely, your maintainer or other people on the +list would not have your PGP key and would not bother obtaining it anyway. +Your patch is not judged by who you are; a good patch from an unknown origin +has a far better chance of being accepted than a patch from a known, respected +origin that is done poorly or does incorrect things. If you really really really really want to do a PGP signed patch, format it as "multipart/signed", not a text/plain message @@ -246,7 +245,7 @@ patch. *2* The mailing list: git@vger.kernel.org -(5) Sign your work +(5) Certify your work by adding your "Signed-off-by: " line To improve tracking of who did what, we've borrowed the "sign-off" procedure from the Linux kernel project on patches diff --git a/Documentation/asciidoctor-extensions.rb b/Documentation/asciidoctor-extensions.rb new file mode 100644 index 0000000..ec83b49 --- /dev/null +++ b/Documentation/asciidoctor-extensions.rb @@ -0,0 +1,28 @@ +require 'asciidoctor' +require 'asciidoctor/extensions' + +module Git + module Documentation + class LinkGitProcessor < Asciidoctor::Extensions::InlineMacroProcessor + use_dsl + + named :chrome + + def process(parent, target, attrs) + if parent.document.basebackend? 'html' + prefix = parent.document.attr('git-relative-html-prefix') + %(<a href="#{prefix}#{target}.html">#{target}(#{attrs[1]})</a>\n) + elsif parent.document.basebackend? 'docbook' + "<citerefentry>\n" \ + "<refentrytitle>#{target}</refentrytitle>" \ + "<manvolnum>#{attrs[1]}</manvolnum>\n" \ + "</citerefentry>\n" + end + end + end + end +end + +Asciidoctor::Extensions.register do + inline_macro Git::Documentation::LinkGitProcessor, :linkgit +end diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 2669b87..dc41957 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -77,7 +77,7 @@ include::line-range-format.txt[] terminal. Can't use `--progress` together with `--porcelain` or `--incremental`. --M|<num>|:: +-M[<num>]:: Detect moved or copied lines within a file. When a commit moves or copies a block of lines (e.g. the original file has A and then B, and the commit changes it to B and then @@ -93,7 +93,7 @@ alphanumeric characters that Git must detect as moving/copying within a file for it to associate those lines with the parent commit. The default value is 20. --C|<num>|:: +-C[<num>]:: In addition to `-M`, detect lines moved or copied from other files that were modified in the same commit. This is useful when you reorganize your program and move code diff --git a/Documentation/cat-texi.perl b/Documentation/cat-texi.perl index 87437f8..14d2f83 100755 --- a/Documentation/cat-texi.perl +++ b/Documentation/cat-texi.perl @@ -1,9 +1,12 @@ #!/usr/bin/perl -w +use strict; +use warnings; + my @menu = (); my $output = $ARGV[0]; -open TMP, '>', "$output.tmp"; +open my $tmp, '>', "$output.tmp"; while (<STDIN>) { next if (/^\\input texinfo/../\@node Top/); @@ -11,13 +14,13 @@ while (<STDIN>) { if (s/^\@top (.*)/\@node $1,,,Top/) { push @menu, $1; } - s/\(\@pxref{\[(URLS|REMOTES)\]}\)//; + s/\(\@pxref\{\[(URLS|REMOTES)\]}\)//; s/\@anchor\{[^{}]*\}//g; - print TMP; + print $tmp $_; } -close TMP; +close $tmp; -printf '\input texinfo +print '\input texinfo @setfilename gitman.info @documentencoding UTF-8 @dircategory Development @@ -28,16 +31,16 @@ printf '\input texinfo @top Git Manual Pages @documentlanguage en @menu -', $menu[0]; +'; for (@menu) { print "* ${_}::\n"; } print "\@end menu\n"; -open TMP, '<', "$output.tmp"; -while (<TMP>) { +open $tmp, '<', "$output.tmp"; +while (<$tmp>) { print; } -close TMP; +close $tmp; print "\@bye\n"; unlink "$output.tmp"; diff --git a/Documentation/config.txt b/Documentation/config.txt index 5064312..10351a2 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -170,6 +170,9 @@ The position of any attributes with respect to the colors be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`, `no-ul`, etc). + +An empty color string produces no color effect at all. This can be used +to avoid coloring specific elements without disabling color entirely. ++ For git's pre-defined color slots, the attributes are meant to be reset at the beginning of each item in the colored output. So setting `color.decorate.branch` to `black` will paint that branch name in a @@ -517,10 +520,12 @@ core.logAllRefUpdates:: "`$GIT_DIR/logs/<ref>`", by appending the new and old SHA-1, the date/time and the reason of the update, but only when the file exists. If this configuration - variable is set to true, missing "`$GIT_DIR/logs/<ref>`" + variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`" file is automatically created for branch heads (i.e. under - refs/heads/), remote refs (i.e. under refs/remotes/), - note refs (i.e. under refs/notes/), and the symbolic ref HEAD. + `refs/heads/`), remote refs (i.e. under `refs/remotes/`), + note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`. + If it is set to `always`, then a missing reflog is automatically + created for any ref under `refs/`. + This information can be used to determine what commit was the tip of a branch "2 days ago". @@ -1914,7 +1919,10 @@ http.<url>.*:: must match exactly between the config key and the URL. . Host/domain name (e.g., `example.com` in `https://example.com/`). - This field must match exactly between the config key and the URL. + This field must match between the config key and the URL. It is + possible to specify a `*` as part of the host name to match all subdomains + at this level. `https://*.example.com/` for example would match + `https://foo.example.com/`, but not `https://foo.bar.example.com/`. . Port number (e.g., `8080` in `http://example.com:8080/`). This field must match exactly between the config key and the URL. @@ -2036,6 +2044,10 @@ log.follow:: i.e. it cannot be used to follow multiple files and does not work well on non-linear history. +log.graphColors:: + A list of colors, separated by commas, that can be used to draw + history lines in `git log --graph`. + log.showRoot:: If true, the initial commit will be shown as a big creation event. This is equivalent to a diff against an empty tree. @@ -2940,7 +2952,7 @@ submodule.alternateLocation:: value is set to `superproject` the submodule to be cloned computes its alternates location relative to the superprojects alternate. -submodule.alternateErrorStrategy +submodule.alternateErrorStrategy:: Specifies how to treat errors with the alternates for a submodule as computed via `submodule.alternateLocation`. Possible values are `ignore`, `info`, `die`. Default is `die`. @@ -3113,17 +3125,39 @@ user.signingKey:: This option is passed unchanged to gpg's --local-user parameter, so you may specify a key using any method that gpg supports. -versionsort.prereleaseSuffix:: - When version sort is used in linkgit:git-tag[1], prerelease - tags (e.g. "1.0-rc1") may appear after the main release - "1.0". By specifying the suffix "-rc" in this variable, - "1.0-rc1" will appear before "1.0". -+ -This variable can be specified multiple times, once per suffix. The -order of suffixes in the config file determines the sorting order -(e.g. if "-pre" appears before "-rc" in the config file then 1.0-preXX -is sorted before 1.0-rcXX). The sorting order between different -suffixes is undefined if they are in multiple config files. +versionsort.prereleaseSuffix (deprecated):: + Deprecated alias for `versionsort.suffix`. Ignored if + `versionsort.suffix` is set. + +versionsort.suffix:: + Even when version sort is used in linkgit:git-tag[1], tagnames + with the same base version but different suffixes are still sorted + lexicographically, resulting e.g. in prerelease tags appearing + after the main release (e.g. "1.0-rc1" after "1.0"). This + variable can be specified to determine the sorting order of tags + with different suffixes. ++ +By specifying a single suffix in this variable, any tagname containing +that suffix will appear before the corresponding main release. E.g. if +the variable is set to "-rc", then all "1.0-rcX" tags will appear before +"1.0". If specified multiple times, once per suffix, then the order of +suffixes in the configuration will determine the sorting order of tagnames +with those suffixes. E.g. if "-pre" appears before "-rc" in the +configuration, then all "1.0-preX" tags will be listed before any +"1.0-rcX" tags. The placement of the main release tag relative to tags +with various suffixes can be determined by specifying the empty suffix +among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and +"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags +are listed first, followed by "v4.8", then "v4.8-ckX" and finally +"v4.8-bfsX". ++ +If more than one suffixes match the same tagname, then that tagname will +be sorted according to the suffix which starts at the earliest position in +the tagname. If more than one different matching suffixes start at +that earliest position, then that tagname will be sorted according to the +longest of those suffixes. +The sorting order between different suffixes is undefined if they are +in multiple config files. web.browser:: Specify a web browser that may be used by some commands. diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index d8570f2..cbce8ec 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -60,6 +60,12 @@ diff.context:: Generate diffs with <n> lines of context instead of the default of 3. This value is overridden by the -U option. +diff.interHunkContext:: + Show the context between diff hunks, up to the specified number + of lines, thereby fusing the hunks that are close to each other. + This value serves as the default for the `--inter-hunk-context` + command line option. + diff.external:: If this config variable is set, diff generation is not performed using the internal diff machinery, but using the @@ -99,9 +105,10 @@ diff.noprefix:: If set, 'git diff' does not show any source or destination prefix. diff.orderFile:: - File indicating how to order files within a diff, using - one shell glob pattern per line. - Can be overridden by the '-O' option to linkgit:git-diff[1]. + File indicating how to order files within a diff. + See the '-O' option to linkgit:git-diff[1] for details. + If `diff.orderFile` is a relative pathname, it is treated as + relative to the top of the working tree. diff.renameLimit:: The number of files to consider when performing the copy/rename diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index e6215c3..d91ddbd 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -466,11 +466,41 @@ information. endif::git-format-patch[] -O<orderfile>:: - Output the patch in the order specified in the - <orderfile>, which has one shell glob pattern per line. + Control the order in which files appear in the output. This overrides the `diff.orderFile` configuration variable (see linkgit:git-config[1]). To cancel `diff.orderFile`, use `-O/dev/null`. ++ +The output order is determined by the order of glob patterns in +<orderfile>. +All files with pathnames that match the first pattern are output +first, all files with pathnames that match the second pattern (but not +the first) are output next, and so on. +All files with pathnames that do not match any pattern are output +last, as if there was an implicit match-all pattern at the end of the +file. +If multiple pathnames have the same rank (they match the same pattern +but no earlier patterns), their output order relative to each other is +the normal order. ++ +<orderfile> is parsed as follows: ++ +-- + - Blank lines are ignored, so they can be used as separators for + readability. + + - Lines starting with a hash ("`#`") are ignored, so they can be used + for comments. Add a backslash ("`\`") to the beginning of the + pattern if it starts with a hash. + + - Each other line contains a single pattern. +-- ++ +Patterns have the same syntax and semantics as patterns used for +fnmantch(3) without the FNM_PATHNAME flag, except a pathname also +matches a pattern if removing any number of the final pathname +components matches the pattern. For example, the pattern "`foo*bar`" +matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". ifndef::git-format-patch[] -R:: @@ -511,6 +541,8 @@ endif::git-format-patch[] --inter-hunk-context=<lines>:: Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. + Defaults to `diff.interHunkContext` or 0 if the config option + is unset. -W:: --function-context:: diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 2bb9a57..bdd915a 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -18,8 +18,8 @@ on the subcommand: git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>] [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] - git bisect (bad|new) [<rev>] - git bisect (good|old) [<rev>...] + git bisect (bad|new|<term-new>) [<rev>] + git bisect (good|old|<term-old>) [<rev>...] git bisect terms [--term-good | --term-bad] git bisect skip [(<rev>|<range>)...] git bisect reset [<commit>] diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 5516a47..092f1bc 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -12,7 +12,7 @@ SYNOPSIS [--list] [-v [--abbrev=<length> | --no-abbrev]] [--column[=<options>] | --no-column] [(--merged | --no-merged | --contains) [<commit>]] [--sort=<key>] - [--points-at <object>] [<pattern>...] + [--points-at <object>] [--format=<format>] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] @@ -91,6 +91,9 @@ OPTIONS based sha1 expressions such as "<branchname>@\{yesterday}". Note that in non-bare repositories, reflogs are usually enabled by default by the `core.logallrefupdates` config option. + The negated form `--no-create-reflog` only overrides an earlier + `--create-reflog`, but currently does not negate the setting of + `core.logallrefupdates`. -f:: --force:: @@ -250,6 +253,11 @@ start-point is either a local or remote-tracking branch. --points-at <object>:: Only list branches of the given object. +--format <format>:: + A string that interpolates `%(fieldname)` from the object + pointed at by a ref being shown. The format is the same as + that of linkgit:git-for-each-ref[1]. + Examples -------- diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 8611a99..92777ce 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -100,10 +100,10 @@ OPTIONS --normalize:: Normalize 'refname' by removing any leading slash (`/`) characters and collapsing runs of adjacent slashes between - name components into a single slash. Iff the normalized + name components into a single slash. If the normalized refname is valid then print it to standard output and exit - with a status of 0. (`--print` is a deprecated way to spell - `--normalize`.) + with a status of 0, otherwise exit with a non-zero status. + (`--print` is a deprecated way to spell `--normalize`.) EXAMPLES diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index e4ac448..8755f3a 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -83,7 +83,20 @@ OPTIONS --match <pattern>:: Only consider tags matching the given `glob(7)` pattern, excluding the "refs/tags/" prefix. This can be used to avoid - leaking private tags from the repository. + leaking private tags from the repository. If given multiple times, a + list of patterns will be accumulated, and tags matching any of the + patterns will be considered. Use `--no-match` to clear and reset the + list of patterns. + +--exclude <pattern>:: + Do not consider tags matching the given `glob(7)` pattern, excluding + the "refs/tags/" prefix. This can be used to narrow the tag space and + find only tags matching some meaningful criteria. If given multiple + times, a list of patterns will be accumulated and tags matching any + of the patterns will be excluded. When combined with --match a tag will + be considered when it matches at least one --match pattern and does not + match any of the --exclude patterns. Use `--no-exclude` to clear and + reset the list of patterns. --always:: Show uniquely abbreviated commit object as fallback. diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 224fb30..96c26e6 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -86,10 +86,11 @@ instead. `--no-symlinks` is the default on Windows. Additionally, `$BASE` is set in the environment. -g:: ---gui:: +--[no-]gui:: When 'git-difftool' is invoked with the `-g` or `--gui` option the default diff tool will be read from the configured - `diff.guitool` variable instead of `diff.tool`. + `diff.guitool` variable instead of `diff.tool`. The `--no-gui` + option can be used to override this setting. --[no-]trust-exit-code:: 'git-difftool' invokes a diff tool individually on each file. diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index abe13f3..111e1be 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -95,11 +95,20 @@ refname:: The name of the ref (the part after $GIT_DIR/). For a non-ambiguous short name of the ref append `:short`. The option core.warnAmbiguousRefs is used to select the strict - abbreviation mode. If `strip=<N>` is appended, strips `<N>` - slash-separated path components from the front of the refname - (e.g., `%(refname:strip=2)` turns `refs/tags/foo` into `foo`. - `<N>` must be a positive integer. If a displayed ref has fewer - components than `<N>`, the command aborts with an error. + abbreviation mode. If `lstrip=<N>` (`rstrip=<N>`) is appended, strips `<N>` + slash-separated path components from the front (back) of the refname + (e.g. `%(refname:lstrip=2)` turns `refs/tags/foo` into `foo` and + `%(refname:rstrip=2)` turns `refs/tags/foo` into `refs`). + If `<N>` is a negative number, strip as many path components as + necessary from the specified end to leave `-<N>` path components + (e.g. `%(refname:lstrip=-2)` turns + `refs/tags/foo` into `tags/foo` and `%(refname:rstrip=-1)` + turns `refs/tags/foo` into `refs`). When the ref does not have + enough components, the result becomes an empty string if + stripping with positive <N>, or it becomes the full refname if + stripping with negative <N>. Neither is an error. ++ +`strip` can be used as a synomym to `lstrip`. objecttype:: The type of the object (`blob`, `tree`, `commit`, `tag`). @@ -110,21 +119,31 @@ objectsize:: objectname:: The object name (aka SHA-1). For a non-ambiguous abbreviation of the object name append `:short`. + For an abbreviation of the object name with desired length append + `:short=<length>`, where the minimum length is MINIMUM_ABBREV. The + length may be exceeded to ensure unique object names. upstream:: The name of a local ref which can be considered ``upstream'' - from the displayed ref. Respects `:short` in the same way as - `refname` above. Additionally respects `:track` to show - "[ahead N, behind M]" and `:trackshort` to show the terse - version: ">" (ahead), "<" (behind), "<>" (ahead and behind), - or "=" (in sync). Has no effect if the ref does not have - tracking information associated with it. + from the displayed ref. Respects `:short`, `:lstrip` and + `:rstrip` in the same way as `refname` above. Additionally + respects `:track` to show "[ahead N, behind M]" and + `:trackshort` to show the terse version: ">" (ahead), "<" + (behind), "<>" (ahead and behind), or "=" (in sync). `:track` + also prints "[gone]" whenever unknown upstream ref is + encountered. Append `:track,nobracket` to show tracking + information without brackets (i.e "ahead N, behind M"). Has + no effect if the ref does not have tracking information + associated with it. All the options apart from `nobracket` + are mutually exclusive, but if used together the last option + is selected. push:: - The name of a local ref which represents the `@{push}` location - for the displayed ref. Respects `:short`, `:track`, and - `:trackshort` options as `upstream` does. Produces an empty - string if no `@{push}` ref is configured. + The name of a local ref which represents the `@{push}` + location for the displayed ref. Respects `:short`, `:lstrip`, + `:rstrip`, `:track`, and `:trackshort` options as `upstream` + does. Produces an empty string if no `@{push}` ref is + configured. HEAD:: '*' if HEAD matches current ref (the checked out branch), ' ' @@ -149,6 +168,25 @@ align:: quoted, but if nested then only the topmost level performs quoting. +if:: + Used as %(if)...%(then)...%(end) or + %(if)...%(then)...%(else)...%(end). If there is an atom with + value or string literal after the %(if) then everything after + the %(then) is printed, else if the %(else) atom is used, then + everything after %(else) is printed. We ignore space when + evaluating the string before %(then), this is useful when we + use the %(HEAD) atom which prints either "*" or " " and we + want to apply the 'if' condition only on the 'HEAD' ref. + Append ":equals=<string>" or ":notequals=<string>" to compare + the value between the %(if:...) and %(then) atoms with the + given string. + +symref:: + The ref which the given symbolic ref refers to. If not a + symbolic ref, nothing is printed. Respects the `:short`, + `:lstrip` and `:rstrip` options in the same way as `refname` + above. + In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can be used to specify the value in the header field. @@ -186,6 +224,14 @@ As a special case for the date-type fields, you may specify a format for the date by adding `:` followed by date format name (see the values the `--date` option to linkgit:git-rev-list[1] takes). +Some atoms like %(align) and %(if) always require a matching %(end). +We call them "opening atoms" and sometimes denote them as %($open). + +When a scripting language specific quoting is in effect, everything +between a top-level opening atom and its matching %(end) is evaluated +according to the semantics of the opening atom and only its result +from the top-level is quoted. + EXAMPLES -------- @@ -273,6 +319,22 @@ eval=`git for-each-ref --shell --format="$fmt" \ eval "$eval" ------------ + +An example to show the usage of %(if)...%(then)...%(else)...%(end). +This prefixes the current branch with a star. + +------------ +git for-each-ref --format="%(if)%(HEAD)%(then)* %(else) %(end)%(refname:short)" refs/heads/ +------------ + + +An example to show the usage of %(if)...%(then)...%(end). +This prints the authorname, if present. + +------------ +git for-each-ref --format="%(refname)%(if)%(authorname)%(then) Authored by: %(authorname)%(end)" +------------ + SEE ALSO -------- linkgit:git-show-ref[1] diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index 852b72c..571b5a7 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -127,7 +127,7 @@ the documentation for the --window' option in linkgit:git-repack[1] for more details. This defaults to 250. Similarly, the optional configuration variable `gc.aggressiveDepth` -controls --depth option in linkgit:git-repack[1]. This defaults to 250. +controls --depth option in linkgit:git-repack[1]. This defaults to 50. The optional configuration variable `gc.pruneExpire` controls how old the unreferenced loose objects have to be before they are pruned. The diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 0ecea6e..71f32f3 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -26,6 +26,7 @@ SYNOPSIS [--threads <num>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] + [--recurse-submodules] [--parent-basename <basename>] [ [--[no-]exclude-standard] [--cached | --no-index | --untracked] | <tree>...] [--] [<pathspec>...] @@ -88,6 +89,19 @@ OPTIONS mechanism. Only useful when searching files in the current directory with `--no-index`. +--recurse-submodules:: + Recursively search in each submodule that has been initialized and + checked out in the repository. When used in combination with the + <tree> option the prefix of all submodule output will be the name of + the parent project's <tree> object. + +--parent-basename <basename>:: + For internal use only. In order to produce uniform output with the + --recurse-submodules option, this option can be used to provide the + basename of a parent's <tree> object to a submodule so the submodule + can prefix its output with the parent's name rather than the SHA1 of + the submodule. + -a:: --text:: Process binary files as if they were text. diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index c1a3e8b..5f93f80 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -35,7 +35,7 @@ blame:: browser:: Start a tree browser showing all files in the specified - commit (or `HEAD` by default). Files selected through the + commit. Files selected through the browser are opened in the blame viewer. citool:: diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 9d27197..3c5a67f 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -116,8 +116,8 @@ does not exist, it will be created. TEMPLATE DIRECTORY ------------------ -The template directory contains files and directories that will be copied to -the `$GIT_DIR` after it is created. +Files and directories in the template directory whose name do not start with a +dot will be copied to the `$GIT_DIR` after it is created. The template directory will be one of the following (in order): diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index ca28fb8..e8e68f5 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -26,7 +26,18 @@ OPTIONS --refs=<pattern>:: Only use refs whose names match a given shell pattern. The pattern - can be one of branch name, tag name or fully qualified ref name. + can be one of branch name, tag name or fully qualified ref name. If + given multiple times, use refs whose names match any of the given shell + patterns. Use `--no-refs` to clear any previous ref patterns given. + +--exclude=<pattern>:: + Do not use any ref whose name matches a given shell pattern. The + pattern can be one of branch name, tag name or fully qualified ref + name. If given multiple times, a ref will be excluded when it matches + any of the given patterns. When used together with --refs, a ref will + be used as a match only when it matches at least one --refs pattern and + does not match any --exclude patterns. Use `--no-exclude` to clear the + list of exclude patterns. --all:: List all commits reachable from all refs diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index bae862d..7436c64 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -479,6 +479,8 @@ git-p4.client:: git-p4.retries:: Specifies the number of times to retry a p4 command (notably, 'p4 sync') if the network times out. The default value is 3. + Set the value to 0 to disable retries or if your p4 version + does not support retries (pre 2012.2). Clone and sync variables ~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 8eefabd..1624a35 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -272,7 +272,7 @@ origin +master` to force a push to the `master` branch). See the standard error stream is not directed to a terminal. --no-recurse-submodules:: ---recurse-submodules=check|on-demand|no:: +--recurse-submodules=check|on-demand|only|no:: May be used to make sure all submodule commits used by the revisions to be pushed are available on a remote-tracking branch. If 'check' is used Git will verify that all submodule commits that @@ -280,11 +280,12 @@ origin +master` to force a push to the `master` branch). See the remote of the submodule. If any commits are missing the push will be aborted and exit with non-zero status. If 'on-demand' is used all submodules that changed in the revisions to be pushed will be - pushed. If on-demand was not able to push all necessary revisions - it will also be aborted and exit with non-zero status. A value of - 'no' or using `--no-recurse-submodules` can be used to override the - push.recurseSubmodules configuration variable when no submodule - recursion is required. + pushed. If on-demand was not able to push all necessary revisions it will + also be aborted and exit with non-zero status. If 'only' is used all + submodules will be recursively pushed while the superproject is left + unpushed. A value of 'no' or using `--no-recurse-submodules` can be used + to override the push.recurseSubmodules configuration variable when no + submodule recursion is required. --[no-]verify:: Toggle the pre-push hook (see linkgit:githooks[5]). The diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt deleted file mode 100644 index 3b33c99..0000000 --- a/Documentation/git-relink.txt +++ /dev/null @@ -1,30 +0,0 @@ -git-relink(1) -============= - -NAME ----- -git-relink - Hardlink common objects in local repositories - -SYNOPSIS --------- -[verse] -'git relink' [--safe] <dir>... <master_dir> - -DESCRIPTION ------------ -This will scan 1 or more object repositories and look for objects in common -with a master repository. Objects not already hardlinked to the master -repository will be replaced with a hardlink to the master repository. - -OPTIONS -------- ---safe:: - Stops if two objects with the same hash exist but have different sizes. - Default is to warn and continue. - -<dir>:: - Directories containing a .git/objects/ subdirectory. - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 25432d9..8a21198 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -292,6 +292,54 @@ $ git reset --keep start <3> <3> But you can use "reset --keep" to remove the unwanted commit after you switched to "branch2". +Split a commit apart into a sequence of commits:: ++ +Suppose that you have created lots of logically separate changes and commited +them together. Then, later you decide that it might be better to have each +logical chunk associated with its own commit. You can use git reset to rewind +history without changing the contents of your local files, and then successively +use `git add -p` to interactively select which hunks to include into each commit, +using `git commit -c` to pre-populate the commit message. ++ +------------ +$ git reset -N HEAD^ <1> +$ git add -p <2> +$ git diff --cached <3> +$ git commit -c HEAD@{1} <4> +... <5> +$ git add ... <6> +$ git diff --cached <7> +$ git commit ... <8> +------------ ++ +<1> First, reset the history back one commit so that we remove the original + commit, but leave the working tree with all the changes. The -N ensures + that any new files added with HEAD are still marked so that git add -p + will find them. +<2> Next, we interactively select diff hunks to add using the git add -p + facility. This will ask you about each diff hunk in sequence and you can + use simple commands such as "yes, include this", "No don't include this" + or even the very powerful "edit" facility. +<3> Once satisfied with the hunks you want to include, you should verify what + has been prepared for the first commit by using git diff --cached. This + shows all the changes that have been moved into the index and are about + to be committed. +<4> Next, commit the changes stored in the index. The -c option specifies to + pre-populate the commit message from the original message that you started + with in the first commit. This is helpful to avoid retyping it. The HEAD@{1} + is a special notation for the commit that HEAD used to be at prior to the + original reset commit (1 change ago). See linkgit:git-reflog[1] for more + details. You may also use any other valid commit reference. +<5> You can repeat steps 2-4 multiple times to break the original code into + any number of commits. +<6> Now you've split out many of the changes into their own commits, and might + no longer use the patch mode of git add, in order to select all remaining + uncommitted changes. +<7> Once again, check to verify that you've included what you want to. You may + also wish to verify that git diff doesn't show any remaining changes to be + committed later. +<8> And finally create the final commit. + DISCUSSION ---------- diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index b6c6326..91c02b8 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -91,7 +91,8 @@ repository. For example: ---- prefix=$(git rev-parse --show-prefix) cd "$(git rev-parse --show-toplevel)" -eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")" +# rev-parse provides the -- needed for 'set' +eval "set $(git rev-parse --sq --prefix "$prefix" -- "$@")" ---- --verify:: @@ -216,6 +217,10 @@ If `$GIT_DIR` is not defined and the current directory is not detected to lie in a Git repository or work tree print a message to stderr and exit with nonzero status. +--absolute-git-dir:: + Like `--git-dir`, but its output is always the canonicalized + absolute path. + --git-common-dir:: Show `$GIT_COMMON_DIR` if defined, else `$GIT_DIR`. diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 2e9cef0..2e9e344 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -47,8 +47,9 @@ OPTIONS save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: - Save your local modifications to a new 'stash', and run `git reset - --hard` to revert them. The <message> part is optional and gives + Save your local modifications to a new 'stash' and roll them + back to HEAD (in the working tree and in the index). + The <message> part is optional and gives the description along with the stashed state. For quickly making a snapshot, you can omit _both_ "save" and <message>, but giving only <message> does not trigger this action to prevent a misspelled diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 918bd1d..8acc72e 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -9,17 +9,12 @@ git-submodule - Initialize, update or inspect submodules SYNOPSIS -------- [verse] -'git submodule' [--quiet] add [-b <branch>] [-f|--force] [--name <name>] - [--reference <repository>] [--depth <depth>] [--] <repository> [<path>] +'git submodule' [--quiet] add [<options>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] 'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...) -'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] - [--[no-]recommend-shallow] [-f|--force] [--rebase|--merge] - [--reference <repository>] [--depth <depth>] [--recursive] - [--jobs <n>] [--] [<path>...] -'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] - [commit] [--] [<path>...] +'git submodule' [--quiet] update [<options>] [--] [<path>...] +'git submodule' [--quiet] summary [<options>] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--recursive] [--] [<path>...] 'git submodule' [--quiet] absorbgitdirs [--] [<path>...] @@ -63,7 +58,7 @@ if you choose to go that route. COMMANDS -------- -add:: +add [-b <branch>] [-f|--force] [--name <name>] [--reference <repository>] [--depth <depth>] [--] <repository> [<path>]:: Add the given repository as a submodule at the given path to the changeset to be committed next to the current project: the current project is termed the "superproject". @@ -104,7 +99,7 @@ together in the same relative location, and only the superproject's URL needs to be provided: git-submodule will correctly locate the submodule using the relative URL in .gitmodules. -status:: +status [--cached] [--recursive] [--] [<path>...]:: Show the status of the submodules. This will print the SHA-1 of the currently checked out commit for each submodule, along with the submodule path and the output of 'git describe' for the @@ -121,7 +116,7 @@ submodules with respect to the commit recorded in the index or the HEAD, linkgit:git-status[1] and linkgit:git-diff[1] will provide that information too (and can also report changes to a submodule's work tree). -init:: +init [--] [<path>...]:: Initialize the submodules recorded in the index (which were added and committed elsewhere) by copying submodule names and urls from .gitmodules to .git/config. @@ -136,7 +131,7 @@ init:: the explicit 'init' step if you do not intend to customize any submodule locations. -deinit:: +deinit [-f|--force] (--all|[--] <path>...):: Unregister the given submodules, i.e. remove the whole `submodule.$name` section from .git/config together with their work tree. Further calls to `git submodule update`, `git submodule foreach` @@ -152,20 +147,20 @@ instead of deinit-ing everything, to prevent mistakes. If `--force` is specified, the submodule's working tree will be removed even if it contains local modifications. -update:: +update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--force] [--checkout|--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...]:: + -- Update the registered submodules to match what the superproject expects by cloning missing submodules and updating the working tree of the submodules. The "updating" can be done in several ways depending on command line options and the value of `submodule.<name>.update` -configuration variable. Supported update procedures are: +configuration variable. The command line option takes precedence over +the configuration variable. if neither is given, a checkout is performed. +update procedures supported both from the command line as well as setting +`submodule.<name>.update`: checkout;; the commit recorded in the superproject will be - checked out in the submodule on a detached HEAD. This is - done when `--checkout` option is given, or no option is - given, and `submodule.<name>.update` is unset, or if it is - set to 'checkout'. + checked out in the submodule on a detached HEAD. + If `--force` is specified, the submodule will be checked out (using `git checkout --force` if appropriate), even if the commit specified @@ -173,23 +168,21 @@ in the index of the containing repository already matches the commit checked out in the submodule. rebase;; the current branch of the submodule will be rebased - onto the commit recorded in the superproject. This is done - when `--rebase` option is given, or no option is given, and - `submodule.<name>.update` is set to 'rebase'. + onto the commit recorded in the superproject. merge;; the commit recorded in the superproject will be merged - into the current branch in the submodule. This is done - when `--merge` option is given, or no option is given, and - `submodule.<name>.update` is set to 'merge'. + into the current branch in the submodule. + +The following procedures are only available via the `submodule.<name>.update` +configuration variable: custom command;; arbitrary shell command that takes a single argument (the sha1 of the commit recorded in the - superproject) is executed. This is done when no option is - given, and `submodule.<name>.update` has the form of - '!command'. + superproject) is executed. When `submodule.<name>.update` + is set to '!command', the remainder after the exclamation mark + is the custom command. -When no option is given and `submodule.<name>.update` is set to 'none', -the submodule is not updated. + none;; the submodule is not updated. If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the @@ -198,7 +191,7 @@ submodule with the `--init` option. If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. -- -summary:: +summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...]:: Show commit summary between the given commit (defaults to HEAD) and working tree/index. For a submodule in question, a series of commits in the submodule between the given super project commit and the @@ -211,7 +204,7 @@ summary:: Using the `--submodule=log` option with linkgit:git-diff[1] will provide that information too. -foreach:: +foreach [--recursive] <command>:: Evaluates an arbitrary shell command in each checked out submodule. The command has access to the variables $name, $path, $sha1 and $toplevel: @@ -228,11 +221,14 @@ foreach:: the processing to terminate. This can be overridden by adding '|| :' to the end of the command. + -As an example, +git submodule foreach \'echo $path {backtick}git -rev-parse HEAD{backtick}'+ will show the path and currently checked out -commit for each submodule. +As an example, the command below will show the path and currently +checked out commit for each submodule: ++ +-------------- +git submodule foreach 'echo $path `git rev-parse HEAD`' +-------------- -sync:: +sync [--recursive] [--] [<path>...]:: Synchronizes submodules' remote URL configuration setting to the value specified in .gitmodules. It will only affect those submodules which already have a URL entry in .git/config (that is the diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 76cfe40..525737a 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -15,7 +15,7 @@ SYNOPSIS 'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] [--column[=<options>] | --no-column] [--create-reflog] [--sort=<key>] [--format=<format>] [--[no-]merged [<commit>]] [<pattern>...] -'git tag' -v <tagname>... +'git tag' -v [--format=<format>] <tagname>... DESCRIPTION ----------- @@ -101,8 +101,8 @@ OPTIONS multiple times, in which case the last key becomes the primary key. Also supports "version:refname" or "v:refname" (tag names are treated as versions). The "version:refname" sort - order can also be affected by the - "versionsort.prereleaseSuffix" configuration variable. + order can also be affected by the "versionsort.suffix" + configuration variable. The keys supported are the same as those in `git for-each-ref`. Sort order defaults to the value configured for the `tag.sort` variable if it exists, or lexicographic order otherwise. See @@ -150,7 +150,11 @@ This option is only applicable when listing tags without annotation lines. 'strip' removes both whitespace and commentary. --create-reflog:: - Create a reflog for the tag. + Create a reflog for the tag. To globally enable reflogs for tags, see + `core.logAllRefUpdates` in linkgit:git-config[1]. + The negated form `--no-create-reflog` only overrides an earlier + `--create-reflog`, but currently does not negate the setting of + `core.logallrefupdates`. <tagname>:: The name of the tag to create, delete, or describe. diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index d590edc..0b8075d 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -8,7 +8,7 @@ git-verify-tag - Check the GPG signature of tags SYNOPSIS -------- [verse] -'git verify-tag' <tag>... +'git verify-tag' [--format=<format>] <tag>... DESCRIPTION ----------- diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index e257c19..553cf84 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -52,7 +52,7 @@ is linked to the current repository, sharing everything except working directory specific files such as HEAD, index, etc. `-` may also be specified as `<branch>`; it is synonymous with `@{-1}`. + -If `<branch>` is omitted and neither `-b` nor `-B` nor `--detached` used, +If `<branch>` is omitted and neither `-b` nor `-B` nor `--detach` used, then, as a convenience, a new branch based at HEAD is created automatically, as if `-b $(basename <path>)` was specified. diff --git a/Documentation/git.txt b/Documentation/git.txt index ba222f6..aa895da 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -44,9 +44,15 @@ unreleased) version of Git, that is available from the 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v2.11.0/git.html[documentation for release 2.11] +* link:v2.12.0/git.html[documentation for release 2.12.0] * release notes for + link:RelNotes/2.12.0.txt[2.12]. + +* link:v2.11.1/git.html[documentation for release 2.11.1] + +* release notes for + link:RelNotes/2.11.1.txt[2.11.1], link:RelNotes/2.11.0.txt[2.11]. * link:v2.10.2/git.html[documentation for release 2.10.2] diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 22309cf..3a0ec8c 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -1658,4 +1658,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitcvs-migration.txt b/Documentation/gitcvs-migration.txt index 4c6143c..1cd1283 100644 --- a/Documentation/gitcvs-migration.txt +++ b/Documentation/gitcvs-migration.txt @@ -203,4 +203,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index 08cf622..46bc6d0 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -288,4 +288,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/giteveryday.txt b/Documentation/giteveryday.txt index 35473ad..10c8ff9 100644 --- a/Documentation/giteveryday.txt +++ b/Documentation/giteveryday.txt @@ -307,9 +307,16 @@ master or exposed as a part of a stable branch. <9> backport a critical fix. <10> create a signed tag. <11> make sure master was not accidentally rewound beyond that -already pushed out. `ko` shorthand points at the Git maintainer's +already pushed out. +<12> In the output from `git show-branch`, `master` should have +everything `ko/master` has, and `next` should have +everything `ko/next` has, etc. +<13> push out the bleeding edge, together with new tags that point +into the pushed history. + +In this example, the `ko` shorthand points at the Git maintainer's repository at kernel.org, and looks like this: -+ + ------------ (in .git/config) [remote "ko"] @@ -320,12 +327,6 @@ repository at kernel.org, and looks like this: push = +refs/heads/pu push = refs/heads/maint ------------ -+ -<12> In the output from `git show-branch`, `master` should have -everything `ko/master` has, and `next` should have -everything `ko/next` has, etc. -<13> push out the bleeding edge, together with new tags that point -into the pushed history. Repository Administration[[ADMINISTRATION]] diff --git a/Documentation/gitglossary.txt b/Documentation/gitglossary.txt index 212e254..571f640 100644 --- a/Documentation/gitglossary.txt +++ b/Documentation/gitglossary.txt @@ -24,4 +24,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index e382dd9..ca96c28 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -178,19 +178,21 @@ used by default. If '$XDG_CONFIG_HOME' is not set it defaults to History ------- Gitk was the first graphical repository browser. It's written in -tcl/tk and started off in a separate repository but was later merged -into the main Git repository. +tcl/tk. +'gitk' is actually maintained as an independent project, but stable +versions are distributed as part of the Git suite for the convenience +of end users. + +gitk-git/ comes from Paul Mackerras's gitk project: + + git://ozlabs.org/~paulus/gitk SEE ALSO -------- 'qgit(1)':: A repository browser written in C++ using Qt. -'gitview(1)':: - A repository browser written in Python using Gtk. It's based on - 'bzrk(1)' and distributed in the contrib area of the Git repository. - 'tig(1)':: A minimal repository browser and Git tool output highlighter written in C using Ncurses. diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 9e8681f..e4b785e 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -452,16 +452,20 @@ set by Git if the remote helper has the 'option' capability. Request the helper to perform a force update. Defaults to 'false'. -'option cloning {'true'|'false'}:: +'option cloning' {'true'|'false'}:: Notify the helper this is a clone request (i.e. the current repository is guaranteed empty). -'option update-shallow {'true'|'false'}:: +'option update-shallow' {'true'|'false'}:: Allow to extend .git/shallow if the new refs require it. -'option pushcert {'true'|'false'}:: +'option pushcert' {'true'|'false'}:: GPG sign pushes. +'option push-option <string>:: + Transmit <string> as a push option. As the a push option + must not contain LF or NUL characters, the string is not encoded. + SEE ALSO -------- linkgit:git-remote[1] diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index a5f99cb..f51ed4e 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -289,4 +289,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index 30d2119..e0976f6 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -433,4 +433,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index b3b58d3..794b833 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -674,4 +674,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index f16c414..177610e 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -477,4 +477,4 @@ linkgit:git-am[1] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index 8ad29e6..fc9320e 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -386,8 +386,10 @@ Glob magic is incompatible with literal magic. exclude;; After a path matches any non-exclude pathspec, it will be run - through all exclude pathspec (magic signature: `!`). If it - matches, the path is ignored. + through all exclude pathspec (magic signature: `!` or its + synonym `^`). If it matches, the path is ignored. When there + is no non-exclude pathspec, the exclusion is applied to the + result set as if invoked without any pathspec. -- [[def_parent]]parent:: diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 5da7cf5..a02f732 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -133,8 +133,8 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). for all following revision specifiers, up to the next `--not`. --all:: - Pretend as if all the refs in `refs/` are listed on the - command line as '<commit>'. + Pretend as if all the refs in `refs/`, along with `HEAD`, are + listed on the command line as '<commit>'. --branches[=<pattern>]:: Pretend as if all the refs in `refs/heads` are listed diff --git a/Documentation/technical/api-hashmap.txt b/Documentation/technical/api-hashmap.txt index 28f5a8b..a3f020c 100644 --- a/Documentation/technical/api-hashmap.txt +++ b/Documentation/technical/api-hashmap.txt @@ -188,7 +188,9 @@ Returns the removed entry, or NULL if not found. `void *hashmap_iter_next(struct hashmap_iter *iter)`:: `void *hashmap_iter_first(struct hashmap *map, struct hashmap_iter *iter)`:: - Used to iterate over all entries of a hashmap. + Used to iterate over all entries of a hashmap. Note that it is + not safe to add or remove entries to the hashmap while + iterating. + `hashmap_iter_init` initializes a `hashmap_iter` structure. + diff --git a/Documentation/technical/api-in-core-index.txt b/Documentation/technical/api-in-core-index.txt deleted file mode 100644 index adbdbf5..0000000 --- a/Documentation/technical/api-in-core-index.txt +++ /dev/null @@ -1,21 +0,0 @@ -in-core index API -================= - -Talk about <read-cache.c> and <cache-tree.c>, things like: - -* cache -> the_index macros -* read_index() -* write_index() -* ie_match_stat() and ie_modified(); how they are different and when to - use which. -* index_name_pos() -* remove_index_entry_at() -* remove_file_from_index() -* add_file_to_index() -* add_index_entry() -* refresh_index() -* discard_index() -* cache_tree_invalidate_path() -* cache_tree_update() - -(JC, Linus) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 27bd701..36768b4 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -168,6 +168,11 @@ There are some macros to easily define options: Introduce an option with string argument. The string argument is put into `str_var`. +`OPT_STRING_LIST(short, long, &struct string_list, arg_str, description)`:: + Introduce an option with string argument. + The string argument is stored as an element in `string_list`. + Use of `--no-option` will clear the list of preceding values. + `OPT_INTEGER(short, long, &int_var, description)`:: Introduce an option with integer argument. The integer is put into `int_var`. diff --git a/Documentation/technical/api-setup.txt b/Documentation/technical/api-setup.txt index 540e455..eb1fa98 100644 --- a/Documentation/technical/api-setup.txt +++ b/Documentation/technical/api-setup.txt @@ -27,8 +27,6 @@ parse_pathspec(). This function takes several arguments: - prefix and args come from cmd_* functions -get_pathspec() is obsolete and should never be used in new code. - parse_pathspec() helps catch unsupported features and reject them politely. At a lower level, different pathspec-related functions may not support the same set of features. Such pathspec-sensitive diff --git a/Documentation/texi.xsl b/Documentation/texi.xsl new file mode 100644 index 0000000..0f8ff07 --- /dev/null +++ b/Documentation/texi.xsl @@ -0,0 +1,26 @@ +<!-- texi.xsl: + convert refsection elements into refsect elements that docbook2texi can + understand --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<xsl:output method="xml" + encoding="UTF-8" + doctype-public="-//OASIS//DTD DocBook XML V4.5//EN" + doctype-system="http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" /> + +<xsl:template match="//refsection"> + <xsl:variable name="element">refsect<xsl:value-of select="count(ancestor-or-self::refsection)" /></xsl:variable> + <xsl:element name="{$element}"> + <xsl:apply-templates select="@*|node()" /> + </xsl:element> +</xsl:template> + +<!-- Copy all other nodes through. --> +<xsl:template match="node()|@*"> + <xsl:copy> + <xsl:apply-templates select="@*|node()" /> + </xsl:copy> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 5e07454..bc29298 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -4395,6 +4395,10 @@ itself! Git Glossary ============ +[[git-explained]] +Git explained +------------- + include::glossary-content.txt[] [[git-quick-start]] @@ -4636,6 +4640,10 @@ $ git gc Appendix B: Notes and todo list for this manual =============================================== +[[todo-list]] +Todo list +--------- + This is a work in progress. The basic requirements: |