diff options
Diffstat (limited to 'Documentation')
47 files changed, 1027 insertions, 546 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index a600e35..ef67b53 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -260,9 +260,11 @@ Writing Documentation: Every user-visible change should be reflected in the documentation. The same general rule as for code applies -- imitate the existing - conventions. A few commented examples follow to provide reference - when writing or modifying command usage strings and synopsis sections - in the manual pages: + conventions. + + A few commented examples follow to provide reference when writing or + modifying command usage strings and synopsis sections in the manual + pages: Placeholders are spelled in lowercase and enclosed in angle brackets: <file> @@ -312,3 +314,29 @@ Writing Documentation: Use 'git' (all lowercase) when talking about commands i.e. something the user would type into a shell and use 'Git' (uppercase first letter) when talking about the version control system and its properties. + + A few commented examples follow to provide reference when writing or + modifying paragraphs or option/command explanations that contain options + or commands: + + Literal examples (e.g. use of command-line options, command names, and + configuration variables) are typeset in monospace, and if you can use + `backticks around word phrases`, do so. + `--pretty=oneline` + `git rev-list` + `remote.pushdefault` + + Word phrases enclosed in `backtick characters` are rendered literally + and will not be further expanded. The use of `backticks` to achieve the + previous rule means that literal examples should not use AsciiDoc + escapes. + Correct: + `--pretty=oneline` + Incorrect: + `\--pretty=oneline` + + If some place in the documentation needs to typeset a command usage + example with inline substitutions, it is fine to use +monospaced and + inline substituted text+ instead of `monospaced literal text`, and with + the former, the part that should not get substituted must be + quoted/escaped. diff --git a/Documentation/Makefile b/Documentation/Makefile index 91a12c7..36c58fc 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -324,7 +324,7 @@ manpage-base-url.xsl: manpage-base-url.xsl.in user-manual.xml: user-manual.txt user-manual.conf $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ - $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book -o $@+ $< && \ + $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d article -o $@+ $< && \ mv $@+ $@ technical/api-index.txt: technical/api-index-skel.txt \ diff --git a/Documentation/RelNotes/1.8.4.5.txt b/Documentation/RelNotes/1.8.4.5.txt new file mode 100644 index 0000000..215bd1a --- /dev/null +++ b/Documentation/RelNotes/1.8.4.5.txt @@ -0,0 +1,13 @@ +Git v1.8.4.5 Release Notes +========================== + +Fixes since v1.8.4.4 +-------------------- + + * Recent update to remote-hg that attempted to make it work better + with non ASCII pathnames fed Unicode strings to the underlying Hg + API, which was wrong. + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.5.1.txt b/Documentation/RelNotes/1.8.5.1.txt new file mode 100644 index 0000000..7236aaf --- /dev/null +++ b/Documentation/RelNotes/1.8.5.1.txt @@ -0,0 +1,9 @@ +Git v1.8.5.1 Release Notes +========================== + +Fixes since v1.8.5 +------------------ + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.5.2.txt b/Documentation/RelNotes/1.8.5.2.txt new file mode 100644 index 0000000..3ac4984 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.2.txt @@ -0,0 +1,20 @@ +Git v1.8.5.2 Release Notes +========================== + +Fixes since v1.8.5.1 +-------------------- + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.8.5.3.txt b/Documentation/RelNotes/1.8.5.3.txt new file mode 100644 index 0000000..3de2dd0 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.3.txt @@ -0,0 +1,27 @@ +Git v1.8.5.3 Release Notes +========================== + +Fixes since v1.8.5.2 +-------------------- + + * The "--[no-]informative-errors" options to "git daemon" were parsed + a bit too loosely, allowing any other string after these option + names. + + * A "gc" process running as a different user should be able to stop a + new "gc" process from starting. + + * An earlier "clean-up" introduced an unnecessary memory leak to the + credential subsystem. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + + * "git rev-parse <revs> -- <paths>" did not implement the usual + disambiguation rules the commands in the "git log" family used in + the same way. + + * "git cat-file --batch=", an admittedly useless command, did not + behave very well. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.9.txt b/Documentation/RelNotes/1.9.txt new file mode 100644 index 0000000..9959257 --- /dev/null +++ b/Documentation/RelNotes/1.9.txt @@ -0,0 +1,314 @@ +Git v1.9 Release Notes +====================== + +Backward compatibility notes +---------------------------- + +"git submodule foreach $cmd $args" used to treat "$cmd $args" the same +way "ssh" did, concatenating them into a single string and letting the +shell unquote. Careless users who forget to sufficiently quote $args +gets their argument split at $IFS whitespaces by the shell, and got +unexpected results due to this. Starting from this release, the +command line is passed directly to the shell, if it has an argument. + +Read-only support for experimental loose-object format, in which users +could optionally choose to write in their loose objects for a short +while between v1.4.3 to v1.5.3 era, has been dropped. + +The meanings of "--tags" option to "git fetch" has changed; the +command fetches tags _in addition to_ what are fetched by the same +command line without the option. + +The way "git push $there $what" interprets $what part given on the +command line, when it does not have a colon that explicitly tells us +what ref at the $there repository is to be updated, has been enhanced. + +A handful of ancient commands that have long been deprecated are +finally gone (repo-config, tar-tree, lost-found, and peek-remote). + + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics, which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + +The default prefix for "git svn" will change in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it will place them under refs/remotes/origin/ unless +it is told otherwise with its --prefix option. + + +Updates since v1.8.5 +-------------------- + +Foreign interfaces, subsystems and ports. + + * The HTTP transport, when talking GSS-Negotiate, uses "100 + Continue" response to avoid having to rewind and resend a large + payload, which may not be always doable. + + * Various bugfixes to remote-bzr and remote-hg (in contrib/). + + * The build procedure is aware of MirBSD now. + + +UI, Workflows & Features + + * Just like we give a reasonable default for "less" via the LESS + environment variable, we now specify a reasonable default for "lv" + via the "LV" environment variable when spawning the pager. + + * Two-level configuration variable names in "branch.*" and "remote.*" + hierarchies, whose variables are predominantly three-level, were + not completed by hitting a <TAB> in bash and zsh completions. + + * Fetching 'frotz' branch with "git fetch", while 'frotz/nitfol' + remote-tracking branch from an earlier fetch was still there, would + error out, primarily because the command was not told that it is + allowed to lose any information on our side. "git fetch --prune" + now can be used to remove 'frotz/nitfol' to make room to fetch and + store 'frotz' remote-tracking branch. + + * "diff.orderfile=<file>" configuration variable can be used to + pretend as if the "-O<file>" option were given from the command + line of "git diff", etc. + + * The negative pathspec syntax allows "git log -- . ':!dir'" to tell + us "I am interested in everything but 'dir' directory". + + * "git difftool" shows how many different paths there are in total, + and how many of them have been shown so far, to indicate progress. + + * "git push origin master" used to push our 'master' branch to update + the 'master' branch at the 'origin' repository. This has been + enhanced to use the same ref mapping "git push origin" would use to + determine what ref at the 'origin' to be updated with our 'master'. + For example, with this configuration + + [remote "origin"] + push = refs/heads/*:refs/review/* + + that would cause "git push origin" to push out our local branches + to corresponding refs under refs/review/ hierarchy at 'origin', + "git push origin master" would update 'refs/review/master' over + there. Alternatively, if push.default is set to 'upstream' and our + 'master' is set to integrate with 'topic' from the 'origin' branch, + running "git push origin" while on our 'master' would update their + 'topic' branch, and running "git push origin master" while on any + of our branches does the same. + + * "gitweb" learned to treat ref hierarchies other than refs/heads as + if they are additional branch namespaces (e.g. refs/changes/ in + Gerrit). + + * "git for-each-ref --format=..." learned a few formatting directives; + e.g. "%(color:red)%(HEAD)%(color:reset) %(refname:short) %(subject)". + + * The command string given to "git submodule foreach" is passed + directly to the shell, without being eval'ed. This is a backward + incompatible change that may break existing users. + + * "git log" and friends learned the "--exclude=<glob>" option, to + allow people to say "list history of all branches except those that + match this pattern" with "git log --exclude='*/*' --branches". + + * "git rev-parse --parseopt" learned a new "--stuck-long" option to + help scripts parse options with an optional parameter. + + * The "--tags" option to "git fetch" no longer tells the command to + fetch _only_ the tags. It instead fetches tags _in addition to_ + what are fetched by the same command line without the option. + + +Performance, Internal Implementation, etc. + + * When parsing a 40-hex string into the object name, the string is + checked to see if it can be interpreted as a ref so that a warning + can be given for ambiguity. The code kicked in even when the + core.warnambiguousrefs is set to false to squelch this warning, in + which case the cycles spent to look at the ref namespace were an + expensive no-op, as the result was discarded without being used. + + * The naming convention of the packfiles has been updated; it used to + be based on the enumeration of names of the objects that are + contained in the pack, but now it also depends on how the packed + result is represented---packing the same set of objects using + different settings (or delta order) would produce a pack with + different name. + + * "git diff --no-index" mode used to unnecessarily attempt to read + the index when there is one. + + * The deprecated parse-options macro OPT_BOOLEAN has been removed; + use OPT_BOOL or OPT_COUNTUP in new code. + + * A few duplicate implementations of prefix/suffix string comparison + functions have been unified to starts_with() and ends_with(). + + * The new PERLLIB_EXTRA makefile variable can be used to specify + additional directories Perl modules (e.g. the ones necessary to run + git-svn) are installed on the platform when building. + + * "git merge-base" learned the "--fork-point" mode, that implements + the same logic used in "git pull --rebase" to find a suitable fork + point out of the reflog entries for the remote-tracking branch the + work has been based on. "git rebase" has the same logic that can be + triggered with the "--fork-point" option. + + * A third-party "receive-pack" (the responder to "git push") can + advertise the "no-thin" capability to tell "git push" not to use + the thin-pack optimization. Our receive-pack has always been + capable of accepting and fattening a thin-pack, and will continue + not to ask "git push" to use a non-thin pack. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.5 +------------------ + +Unless otherwise noted, all the fixes since v1.8.5 in the maintenance +track are contained in this release (see the maintenance releases' notes +for details). + + * The implementation of 'git stash $cmd "stash@{...}"' did not quote + the stash argument properly and left it split at IFS whitespace. + (merge 2a07e43 ow/stash-with-ifs later to maint). + + * The "--[no-]informative-errors" options to "git daemon" were parsed + a bit too loosely, allowing any other string after these option + names. + (merge 82246b7 nd/daemon-informative-errors-typofix later to maint). + + * There is no reason to have a hardcoded upper limit of the number of + parents for an octopus merge, created via the graft mechanism, but + there was. + (merge e228c17 js/lift-parent-count-limit later to maint). + + * The basic test used to leave unnecessary trash directories in the + t/ directory. + (merge 738a8be jk/test-framework-updates later to maint). + + * "git merge-base --octopus" used to leave cleaning up suboptimal + result to the caller, but now it does the clean-up itself. + (merge 8f29299 bm/merge-base-octopus-dedup later to maint). + + * A "gc" process running as a different user should be able to stop a + new "gc" process from starting, but it didn't. + (merge ed7eda8 km/gc-eperm later to maint). + + * An earlier "clean-up" introduced an unnecessary memory leak. + (merge e1c1a32 jk/credential-plug-leak later to maint). + + * "git add -A" (no other arguments) in a totally empty working tree + used to emit an error. + (merge 64ed07c nd/add-empty-fix later to maint). + + * "git log --decorate" did not handle a tag pointed by another tag + nicely. + (merge 5e1361c bc/log-decoration later to maint). + + * When we figure out how many file descriptors to allocate for + keeping packfiles open, a system with non-working getrlimit() could + cause us to die(), but because we make this call only to get a + rough estimate of how many is available and we do not even attempt + to use up all file descriptors available ourselves, it is nicer to + fall back to a reasonable low value rather than dying. + (merge 491a8de jh/rlimit-nofile-fallback later to maint). + + * read_sha1_file(), that is the workhorse to read the contents given + an object name, honoured object replacements, but there was no + corresponding mechanism to sha1_object_info() that was used to + obtain the metainfo (e.g. type & size) about the object. This led + callers to weird inconsistencies. + (merge 663a856 cc/replace-object-info later to maint). + + * "git cat-file --batch=", an admittedly useless command, did not + behave very well. + (merge 6554dfa jk/cat-file-regression-fix later to maint). + + * "git rev-parse <revs> -- <paths>" did not implement the usual + disambiguation rules the commands in the "git log" family used in + the same way. + (merge 62f162f jk/rev-parse-double-dashes later to maint). + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + (merge c57f628 mm/mv-file-to-no-such-dir-with-slash later to maint). + + * A workaround to an old bug in glibc prior to glibc 2.17 has been + retired; this would remove a side effect of the workaround that + corrupts system error messages in non-C locales. + + * SSL-related options were not passed correctly to underlying socket + layer in "git send-email". + (merge 5508f3e tr/send-email-ssl later to maint). + + * "git commit -v" appends the patch to the log message before + editing, and then removes the patch when the editor returned + control. However, the patch was not stripped correctly when the + first modified path was a submodule. + (merge 1a72cfd jl/commit-v-strip-marker later to maint). + + * "git fetch --depth=0" was a no-op, and was silently ignored. + Diagnose it as an error. + (merge 5594bca nd/transport-positive-depth-only later to maint). + + * Remote repository URL expressed in scp-style host:path notation are + parsed more carefully (e.g. "foo/bar:baz" is local, "[::1]:/~user" asks + to connect to user's home directory on host at address ::1. + (merge a2036d7 tb/clone-ssh-with-colon-for-port later to maint). + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + (merge 887c6c1 nd/magic-pathspec later to maint). + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + (merge 4ef8d1d sb/sha1-loose-object-info-check-existence later to maint). + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + (merge 77b43ca jk/two-way-merge-corner-case-fix later to maint). + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. + (merge b2476a6 jh/loose-object-dirs-creation-race later to maint). diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 7055576..e6d46ed 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -139,8 +139,15 @@ People on the Git mailing list need to be able to read and comment on the changes you are submitting. It is important for a developer to be able to "quote" your changes, using standard e-mail tools, so that they may comment on specific portions of -your code. For this reason, all patches should be submitted -"inline". If your log message (including your name on the +your code. For this reason, each patch should be submitted +"inline" in a separate message. + +Multiple related patches should be grouped into their own e-mail +thread to help readers find all parts of the series. To that end, +send them as replies to either an additional "cover letter" message +(see below), the first patch, or the respective preceding patch. + +If your log message (including your name on the Signed-off-by line) is not writable in ASCII, make sure that you send off a message in the correct encoding. diff --git a/Documentation/config.txt b/Documentation/config.txt index 1a0bd0d..5f4d793 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -567,6 +567,10 @@ be passed to the shell by Git, which will translate the final command to `LESS=FRSX less -+S`. The environment tells the command to set the `S` option to chop long lines but the command line resets it to the default to fold long lines. ++ +Likewise, when the `LV` environment variable is unset, Git sets it +to `-c`. You can override this setting by exporting `LV` with +another value or setting `core.pager` to `lv +c`. core.whitespace:: A comma separated list of common whitespace problems to @@ -2091,8 +2095,8 @@ remote.<name>.vcs:: remote.<name>.prune:: When set to true, fetching from this remote by default will also - remove any remote-tracking branches which no longer exist on the - remote (as if the `--prune` option was give on the command line). + remove any remote-tracking references that no longer exist on the + remote (as if the `--prune` option was given on the command line). Overrides `fetch.prune` settings, if any. remotes.<group>:: diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 223b931..f07b451 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -98,6 +98,11 @@ diff.mnemonicprefix:: diff.noprefix:: If set, 'git diff' does not show any source or destination prefix. +diff.orderfile:: + File indicating how to order files within a diff, using + one shell glob pattern per line. + Can be overridden by the '-O' option to linkgit:git-diff[1]. + diff.renameLimit:: The number of files to consider when performing the copy/rename detection; equivalent to the 'git diff' option '-l'. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index bbed2cd..9b37b2a 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -432,6 +432,9 @@ endif::git-format-patch[] -O<orderfile>:: Output the patch in the order specified in the <orderfile>, which has one shell glob pattern per line. + This overrides the `diff.orderfile` configuration variable + (see linkgit:git-config[1]). To cancel `diff.orderfile`, + use `-O/dev/null`. ifndef::git-format-patch[] -R:: diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 54043e3..92c68c3 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -51,17 +51,20 @@ ifndef::git-pull[] -p:: --prune:: - After fetching, remove any remote-tracking branches which - no longer exist on the remote. + After fetching, remove any remote-tracking references that no + longer exist on the remote. Tags are not subject to pruning + if they are fetched only because of the default tag + auto-following or due to a --tags option. However, if tags + are fetched due to an explicit refspec (either on the command + line or in the remote configuration, for example if the remote + was cloned with the --mirror option), then they are also + subject to pruning. endif::git-pull[] -ifdef::git-pull[] ---no-tags:: -endif::git-pull[] ifndef::git-pull[] -n:: ---no-tags:: endif::git-pull[] +--no-tags:: By default, tags that point at objects that are downloaded from the remote repository are fetched and stored locally. This option disables this automatic tag following. The default @@ -71,11 +74,12 @@ endif::git-pull[] ifndef::git-pull[] -t:: --tags:: - This is a short-hand for giving `refs/tags/*:refs/tags/*` - refspec from the command line, to ask all tags to be fetched - and stored locally. Because this acts as an explicit - refspec, the default refspecs (configured with the - remote.$name.fetch variable) are overridden and not used. + Fetch all tags from the remote (i.e., fetch remote tags + `refs/tags/*` into local tags with the same name), in addition + to whatever else would otherwise be fetched. Using this + option alone does not subject tags to pruning, even if --prune + is used (though tags may be pruned anyway if they are also the + destination of an explicit refspec; see '--prune'). --recurse-submodules[=yes|on-demand|no]:: This option controls if and under what conditions new commits of diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index 322f5ed..f6a16f4 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -109,6 +109,11 @@ newline. The available atoms are: The size, in bytes, that the object takes up on disk. See the note about on-disk sizes in the `CAVEATS` section below. +`deltabase`:: + If the object is stored as a delta on-disk, this expands to the + 40-hex sha1 of the delta base object. Otherwise, expands to the + null sha1 (40 zeroes). See `CAVEATS` below. + `rest`:: If this atom is used in the output string, input lines are split at the first whitespace boundary. All characters before that @@ -152,10 +157,11 @@ should be taken in drawing conclusions about which refs or objects are responsible for disk usage. The size of a packed non-delta object may be much larger than the size of objects which delta against it, but the choice of which object is the base and which is the delta is arbitrary -and is subject to change during a repack. Note also that multiple copies -of an object may be present in the object database; in this case, it is -undefined which copy's size will be reported. +and is subject to change during a repack. +Note also that multiple copies of an object may be present in the object +database; in this case, it is undefined which copy's size or delta base +will be reported. GIT --- diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt index 2d0daae..0ea921a 100644 --- a/Documentation/git-cherry.txt +++ b/Documentation/git-cherry.txt @@ -3,7 +3,7 @@ git-cherry(1) NAME ---- -git-cherry - Find commits not merged upstream +git-cherry - Find commits yet to be applied to upstream SYNOPSIS -------- @@ -12,46 +12,26 @@ SYNOPSIS DESCRIPTION ----------- -The changeset (or "diff") of each commit between the fork-point and <head> -is compared against each commit between the fork-point and <upstream>. -The diffs are compared after removing any whitespace and line numbers. +Determine whether there are commits in `<head>..<upstream>` that are +equivalent to those in the range `<limit>..<head>`. -Every commit that doesn't exist in the <upstream> branch -has its id (sha1) reported, prefixed by a symbol. The ones that have -equivalent change already -in the <upstream> branch are prefixed with a minus (-) sign, and those -that only exist in the <head> branch are prefixed with a plus (+) symbol: - - __*__*__*__*__> <upstream> - / - fork-point - \__+__+__-__+__+__-__+__> <head> - - -If a <limit> has been given then the commits along the <head> branch up -to and including <limit> are not reported: - - __*__*__*__*__> <upstream> - / - fork-point - \__*__*__<limit>__-__+__> <head> - - -Because 'git cherry' compares the changeset rather than the commit id -(sha1), you can use 'git cherry' to find out if a commit you made locally -has been applied <upstream> under a different commit id. For example, -this will happen if you're feeding patches <upstream> via email rather -than pushing or pulling commits directly. +The equivalence test is based on the diff, after removing whitespace +and line numbers. git-cherry therefore detects when commits have been +"copied" by means of linkgit:git-cherry-pick[1], linkgit:git-am[1] or +linkgit:git-rebase[1]. +Outputs the SHA1 of every commit in `<limit>..<head>`, prefixed with +`-` for commits that have an equivalent in <upstream>, and `+` for +commits that do not. OPTIONS ------- -v:: - Verbose. + Show the commit subjects next to the SHA1s. <upstream>:: - Upstream branch to compare against. - Defaults to the first tracked remote branch, if available. + Upstream branch to search for equivalent commits. + Defaults to the upstream branch of HEAD. <head>:: Working branch; defaults to HEAD. @@ -59,6 +39,103 @@ OPTIONS <limit>:: Do not report commits up to (and including) limit. +EXAMPLES +-------- + +Patch workflows +~~~~~~~~~~~~~~~ + +git-cherry is frequently used in patch-based workflows (see +linkgit:gitworkflows[7]) to determine if a series of patches has been +applied by the upstream maintainer. In such a workflow you might +create and send a topic branch like this: + +------------ +$ git checkout -b topic origin/master +# work and create some commits +$ git format-patch origin/master +$ git send-email ... 00* +------------ + +Later, you can see whether your changes have been applied by saying +(still on `topic`): + +------------ +$ git fetch # update your notion of origin/master +$ git cherry -v +------------ + +Concrete example +~~~~~~~~~~~~~~~~ + +In a situation where topic consisted of three commits, and the +maintainer applied two of them, the situation might look like: + +------------ +$ git log --graph --oneline --decorate --boundary origin/master...topic +* 7654321 (origin/master) upstream tip commit +[... snip some other commits ...] +* cccc111 cherry-pick of C +* aaaa111 cherry-pick of A +[... snip a lot more that has happened ...] +| * cccc000 (topic) commit C +| * bbbb000 commit B +| * aaaa000 commit A +|/ +o 1234567 branch point +------------ + +In such cases, git-cherry shows a concise summary of what has yet to +be applied: + +------------ +$ git cherry origin/master topic +- cccc000... commit C ++ bbbb000... commit B +- aaaa000... commit A +------------ + +Here, we see that the commits A and C (marked with `-`) can be +dropped from your `topic` branch when you rebase it on top of +`origin/master`, while the commit B (marked with `+`) still needs to +be kept so that it will be sent to be applied to `origin/master`. + + +Using a limit +~~~~~~~~~~~~~ + +The optional <limit> is useful in cases where your topic is based on +other work that is not in upstream. Expanding on the previous +example, this might look like: + +------------ +$ git log --graph --oneline --decorate --boundary origin/master...topic +* 7654321 (origin/master) upstream tip commit +[... snip some other commits ...] +* cccc111 cherry-pick of C +* aaaa111 cherry-pick of A +[... snip a lot more that has happened ...] +| * cccc000 (topic) commit C +| * bbbb000 commit B +| * aaaa000 commit A +| * 0000fff (base) unpublished stuff F +[... snip ...] +| * 0000aaa unpublished stuff A +|/ +o 1234567 merge-base between upstream and topic +------------ + +By specifying `base` as the limit, you can avoid listing commits +between `base` and `topic`: + +------------ +$ git cherry origin/master topic base +- cccc000... commit C ++ bbbb000... commit B +- aaaa000... commit A +------------ + + SEE ALSO -------- linkgit:git-patch-id[1] diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 444b805..93b5067 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -12,7 +12,7 @@ SYNOPSIS 'git fetch-pack' [--all] [--quiet|-q] [--keep|-k] [--thin] [--include-tag] [--upload-pack=<git-upload-pack>] [--depth=<n>] [--no-progress] - [-v] [<host>:]<directory> [<refs>...] + [-v] <repository> [<refs>...] DESCRIPTION ----------- @@ -97,19 +97,18 @@ be in a separate packet, and the list must end with a flush packet. -v:: Run verbosely. -<host>:: - A remote host that houses the repository. When this - part is specified, 'git-upload-pack' is invoked via - ssh. - -<directory>:: - The repository to sync from. +<repository>:: + The URL to the remote repository. <refs>...:: The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. +SEE ALSO +-------- +linkgit:git-fetch[1] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index e08a028..5809aa4 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -24,19 +24,22 @@ The ref names and their object names of fetched refs are stored in `.git/FETCH_HEAD`. This information is left for a later merge operation done by 'git merge'. -When <refspec> stores the fetched result in remote-tracking branches, -the tags that point at these branches are automatically -followed. This is done by first fetching from the remote using -the given <refspec>s, and if the repository has objects that are -pointed by remote tags that it does not yet have, then fetch -those missing tags. If the other end has tags that point at -branches you are not interested in, you will not get them. +By default, tags are auto-followed. This means that when fetching +from a remote, any tags on the remote that point to objects that exist +in the local repository are fetched. The effect is to fetch tags that +point at branches that you are interested in. This default behavior +can be changed by using the --tags or --no-tags options, by +configuring remote.<name>.tagopt, or by using a refspec that fetches +tags explicitly. 'git fetch' can fetch from either a single named repository, or from several repositories at once if <group> is given and there is a remotes.<group> entry in the configuration file. (See linkgit:git-config[1]). +When no remote is specified, by default the `origin` remote will be used, +unless there's an upstream branch configured for the current branch. + OPTIONS ------- include::fetch-options.txt[] diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index e4c8e82..2eba627 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -393,7 +393,7 @@ git filter-branch --index-filter \ Checklist for Shrinking a Repository ------------------------------------ -git-filter-branch is often used to get rid of a subset of files, +git-filter-branch can be used to get rid of a subset of files, usually with some combination of `--index-filter` and `--subdirectory-filter`. People expect the resulting repository to be smaller than the original, but you need a few more steps to @@ -429,6 +429,37 @@ warned. (or if your git-gc is not new enough to support arguments to `--prune`, use `git repack -ad; git prune` instead). +Notes +----- + +git-filter-branch allows you to make complex shell-scripted rewrites +of your Git history, but you probably don't need this flexibility if +you're simply _removing unwanted data_ like large files or passwords. +For those operations you may want to consider +link:http://rtyley.github.io/bfg-repo-cleaner/[The BFG Repo-Cleaner], +a JVM-based alternative to git-filter-branch, typically at least +10-50x faster for those use-cases, and with quite different +characteristics: + +* Any particular version of a file is cleaned exactly _once_. The BFG, + unlike git-filter-branch, does not give you the opportunity to + handle a file differently based on where or when it was committed + within your history. This constraint gives the core performance + benefit of The BFG, and is well-suited to the task of cleansing bad + data - you don't care _where_ the bad data is, you just want it + _gone_. + +* By default The BFG takes full advantage of multi-core machines, + cleansing commit file-trees in parallel. git-filter-branch cleans + commits sequentially (ie in a single-threaded manner), though it + _is_ possible to write filters that include their own parallellism, + in the scripts executed against each commit. + +* The link:http://rtyley.github.io/bfg-repo-cleaner/#examples[command options] + are much more restrictive than git-filter branch, and dedicated just + to the tasks of removing unwanted data- e.g: + `--strip-blobs-bigger-than 1M`. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index f2e08d1..94f5c46 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -91,7 +91,19 @@ objectname:: upstream:: The name of a local ref which can be considered ``upstream'' from the displayed ref. Respects `:short` in the same way as - `refname` above. + `refname` above. Additionally respects `:track` to show + "[ahead N, behind M]" and `:trackshort` to show the terse + version: ">" (ahead), "<" (behind), "<>" (ahead and behind), + or "=" (in sync). Has no effect if the ref does not have + tracking information associated with it. + +HEAD:: + '*' if HEAD matches current ref (the checked out branch), ' ' + otherwise. + +color:: + Change output color. Followed by `:<colorname>`, where names + are described in `color.branch.*`. In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 34097ef..1f7bc67 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -15,9 +15,9 @@ DESCRIPTION ----------- Shows the commit logs. -The command takes options applicable to the 'git rev-list' +The command takes options applicable to the `git rev-list` command to control what is shown and how, and options applicable to -the 'git diff-*' commands to control how the changes +the `git diff-*` commands to control how the changes each commit introduces are shown. @@ -42,29 +42,27 @@ OPTIONS --use-mailmap:: Use mailmap file to map author and committer names and email - to canonical real names and email addresses. See + addresses to canonical real names and email addresses. See linkgit:git-shortlog[1]. --full-diff:: - Without this flag, "git log -p <path>..." shows commits that + Without this flag, `git log -p <path>...` shows commits that touch the specified paths, and diffs about the same specified paths. With this, the full diff is shown for commits that touch the specified paths; this means that "<path>..." limits only commits, and doesn't limit diff for those commits. + Note that this affects all diff-based output types, e.g. those -produced by --stat etc. +produced by `--stat`, etc. --log-size:: - Before the log message print out its size in bytes. Intended - mainly for porcelain tools consumption. If Git is unable to - produce a valid value size is set to zero. - Note that only message is considered, if also a diff is shown - its size is not included. + Include a line ``log size <number>'' in the output for each commit, + where <number> is the length of that commit's message in bytes. + Intended to speed up tools that read log messages from `git log` + output by allowing them to allocate space in advance. -L <start>,<end>:<file>:: -L :<regex>:<file>:: - Trace the evolution of the line range given by "<start>,<end>" (or the funcname regex <regex>) within the <file>. You may not give any pathspec limiters. This is currently limited to @@ -80,16 +78,16 @@ include::line-range-format.txt[] whole history leading to the current commit). `origin..HEAD` specifies all the commits reachable from the current commit (i.e. `HEAD`), but not from `origin`. For a complete list of - ways to spell <revision range>, see the "Specifying Ranges" + ways to spell <revision range>, see the 'Specifying Ranges' section of linkgit:gitrevisions[7]. [\--] <path>...:: Show only commits that are enough to explain how the files - that match the specified paths came to be. See "History - Simplification" below for details and other simplification + that match the specified paths came to be. See 'History + Simplification' below for details and other simplification modes. + -Paths may need to be prefixed with "\-- " to separate them from +Paths may need to be prefixed with ``\-- '' to separate them from options or the revision range, when confusion arises. include::rev-list-options.txt[] @@ -113,12 +111,12 @@ EXAMPLES `git log v2.6.12.. include/scsi drivers/scsi`:: Show all commits since version 'v2.6.12' that changed any file - in the include/scsi or drivers/scsi subdirectories + in the `include/scsi` or `drivers/scsi` subdirectories `git log --since="2 weeks ago" -- gitk`:: Show the changes during the last two weeks to the file 'gitk'. - The "--" is necessary to avoid confusion with the *branch* named + The ``--'' is necessary to avoid confusion with the *branch* named 'gitk' `git log --name-status release..test`:: @@ -129,7 +127,7 @@ EXAMPLES `git log --follow builtin/rev-list.c`:: - Shows the commits that changed builtin/rev-list.c, including + Shows the commits that changed `builtin/rev-list.c`, including those commits that occurred before the file was given its present name. @@ -147,17 +145,18 @@ EXAMPLES `git log -p -m --first-parent`:: Shows the history including change diffs, but only from the - "main branch" perspective, skipping commits that come from merged + ``main branch'' perspective, skipping commits that come from merged branches, and showing full diffs of changes introduced by the merges. This makes sense only when following a strict policy of merging all topic branches when staying on a single integration branch. `git log -L '/int main/',/^}/:main.c`:: - Shows how the function `main()` in the file 'main.c' evolved + Shows how the function `main()` in the file `main.c` evolved over time. `git log -3`:: + Limits the number of commits to show to 3. DISCUSSION @@ -172,12 +171,12 @@ See linkgit:git-config[1] for core variables and linkgit:git-diff[1] for settings related to diff generation. format.pretty:: - Default for the `--format` option. (See "PRETTY FORMATS" above.) - Defaults to "medium". + Default for the `--format` option. (See 'Pretty Formats' above.) + Defaults to `medium`. i18n.logOutputEncoding:: - Encoding to use when displaying logs. (See "Discussion", above.) - Defaults to the value of `i18n.commitEncoding` if set, UTF-8 + Encoding to use when displaying logs. (See 'Discussion' above.) + Defaults to the value of `i18n.commitEncoding` if set, and UTF-8 otherwise. log.date:: @@ -186,7 +185,7 @@ log.date:: dates like `Sat May 8 19:35:34 2010 -0500`. log.showroot:: - If `false`, 'git log' and related commands will not treat the + If `false`, `git log` and related commands will not treat the initial commit as a big creation event. Any root commits in `git log -p` output would be shown without a diff attached. The default is `true`. @@ -197,7 +196,7 @@ mailmap.*:: notes.displayRef:: Which refs, in addition to the default set by `core.notesRef` or 'GIT_NOTES_REF', to read notes from when showing commit - messages with the 'log' family of commands. See + messages with the `log` family of commands. See linkgit:git-notes[1]. + May be an unabbreviated ref name or a glob and may be specified diff --git a/Documentation/git-lost-found.txt b/Documentation/git-lost-found.txt deleted file mode 100644 index d549328..0000000 --- a/Documentation/git-lost-found.txt +++ /dev/null @@ -1,74 +0,0 @@ -git-lost-found(1) -================= - -NAME ----- -git-lost-found - Recover lost refs that luckily have not yet been pruned - -SYNOPSIS --------- -[verse] -'git lost-found' - -DESCRIPTION ------------ - -*NOTE*: this command is deprecated. Use linkgit:git-fsck[1] with -the option '--lost-found' instead. - -Finds dangling commits and tags from the object database, and -creates refs to them in the .git/lost-found/ directory. Commits and -tags that dereference to commits are stored in .git/lost-found/commit, -and other objects are stored in .git/lost-found/other. - - -OUTPUT ------- -Prints to standard output the object names and one-line descriptions -of any commits or tags found. - -EXAMPLE -------- - -Suppose you run 'git tag -f' and mistype the tag to overwrite. -The ref to your tag is overwritten, but until you run 'git -prune', the tag itself is still there. - ------------- -$ git lost-found -[1ef2b196d909eed523d4f3c9bf54b78cdd6843c6] GIT 0.99.9c -... ------------- - -Also you can use gitk to browse how any tags found relate to each -other. - ------------- -$ gitk $(cd .git/lost-found/commit && echo ??*) ------------- - -After making sure you know which the object is the tag you are looking -for, you can reconnect it to your regular `refs` hierarchy by using -the `update-ref` command. - ------------- -$ git cat-file -t 1ef2b196 -tag -$ git cat-file tag 1ef2b196 -object fa41bbce8e38c67a218415de6cfa510c7e50032a -type commit -tag v0.99.9c -tagger Junio C Hamano <junkio@cox.net> 1131059594 -0800 - -GIT 0.99.9c - -This contains the following changes from the "master" branch, since -... -$ git update-ref refs/tags/not-lost-anymore 1ef2b196 -$ git rev-parse not-lost-anymore -1ef2b196d909eed523d4f3c9bf54b78cdd6843c6 ------------- - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index 87842e3..808426f 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -13,6 +13,7 @@ SYNOPSIS 'git merge-base' [-a|--all] --octopus <commit>... 'git merge-base' --is-ancestor <commit> <commit> 'git merge-base' --independent <commit>... +'git merge-base' --fork-point <ref> [<commit>] DESCRIPTION ----------- @@ -24,8 +25,8 @@ that does not have any better common ancestor is a 'best common ancestor', i.e. a 'merge base'. Note that there can be more than one merge base for a pair of commits. -OPERATION MODE --------------- +OPERATION MODES +--------------- As the most common special case, specifying only two commits on the command line means computing the merge base between the given two commits. @@ -56,6 +57,14 @@ from linkgit:git-show-branch[1] when used with the `--merge-base` option. and exit with status 0 if true, or with status 1 if not. Errors are signaled by a non-zero status that is not 1. +--fork-point:: + Find the point at which a branch (or any history that leads + to <commit>) forked from another branch (or any reference) + <ref>. This does not just look for the common ancestor of + the two commits, but also takes into account the reflog of + <ref> to see if the history leading to <commit> forked from + an earlier incarnation of the branch <ref> (see discussion + on this mode below). OPTIONS ------- @@ -137,6 +146,31 @@ In modern git, you can say this in a more direct way: instead. +Discussion on fork-point mode +----------------------------- + +After working on the `topic` branch created with `git checkout -b +topic origin/master`, the history of remote-tracking branch +`origin/master` may have been rewound and rebuilt, leading to a +history of this shape: + + o---B1 + / + ---o---o---B2--o---o---o---B (origin/master) + \ + B3 + \ + Derived (topic) + +where `origin/master` used to point at commits B3, B2, B1 and now it +points at B, and your `topic` branch was started on top of it back +when `origin/master` was at B3. This mode uses the reflog of +`origin/master` to find B3 as the fork point, so that the `topic` +can be rebased on top of the updated `origin/master` by: + + $ fork_point=$(git merge-base --fork-point origin/master topic) + $ git rebase --onto origin/master $fork_point topic + See also -------- diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index b1f7988..e453132 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -52,6 +52,18 @@ core.worktree setting to make the submodule work in the new location. It also will attempt to update the submodule.<name>.path setting in the linkgit:gitmodules[5] file and stage that file (unless -n is used). +BUGS +---- +Each time a superproject update moves a populated submodule (e.g. when +switching between commits before and after the move) a stale submodule +checkout will remain in the old location and an empty directory will +appear in the new location. To populate the submodule again in the new +location the user will have to run "git submodule update" +afterwards. Removing the old directory is only safe when it uses a +gitfile, as otherwise the history of the submodule will be deleted +too. Both steps will be obsolete when recursive submodule update has +been implemented. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index d94edcd..cdab9ed 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -51,8 +51,7 @@ base-name:: <base-name> to determine the name of the created file. When this option is used, the two files are written in <base-name>-<SHA-1>.{pack,idx} files. <SHA-1> is a hash - of the sorted object names to make the resulting filename - based on the pack content, and written to the standard + based on the pack content and is written to the standard output of the command. --stdout:: diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt deleted file mode 100644 index 87ea3fb..0000000 --- a/Documentation/git-peek-remote.txt +++ /dev/null @@ -1,43 +0,0 @@ -git-peek-remote(1) -================== - -NAME ----- -git-peek-remote - List the references in a remote repository - - -SYNOPSIS --------- -[verse] -'git peek-remote' [--upload-pack=<git-upload-pack>] [<host>:]<directory> - -DESCRIPTION ------------ -This command is deprecated; use 'git ls-remote' instead. - -OPTIONS -------- ---upload-pack=<git-upload-pack>:: - Use this to specify the path to 'git-upload-pack' on the - remote side, if it is not found on your $PATH. Some - installations of sshd ignores the user's environment - setup scripts for login shells (e.g. .bash_profile) and - your privately installed git may not be found on the system - default $PATH. Another workaround suggested is to set - up your $PATH in ".bashrc", but this flag is for people - who do not want to pay the overhead for non-interactive - shells, but prefer having a lean .bashrc file (they set most of - the things up in .bash_profile). - -<host>:: - A remote host that houses the repository. When this - part is specified, 'git-upload-pack' is invoked via - ssh. - -<directory>:: - The repository to sync from. - - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 9eec740..2b7f4f9 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -56,8 +56,13 @@ it can be any arbitrary "SHA-1 expression", such as `master~4` or + The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must -be named. If `:`<dst> is omitted, the same ref as <src> will be -updated. +be named. +If `git push [<repository>]` without any `<refspec>` argument is set to +update some ref at the destination with `<src>` with +`remote.<repository>.push` configuration variable, `:<dst>` part can +be omitted---such a push will update a ref that `<src>` normally updates +without any `<refspec>` on the command line. Otherwise, missing +`:<dst>` means to update the same ref as the `<src>`. + The object referenced by <src> is used to update the <dst> reference on the remote side. By default this is only allowed if <dst> is not diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 94e07fd..2889be6 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -324,6 +324,16 @@ fresh commits so it can be remerged successfully without needing to "revert the reversion" (see the link:howto/revert-a-faulty-merge.html[revert-a-faulty-merge How-To] for details). +--fork-point:: +--no-fork-point:: + Use 'git merge-base --fork-point' to find a better common ancestor + between `upstream` and `branch` when calculating which commits have + have been introduced by `branch` (see linkgit:git-merge-base[1]). ++ +If no non-option arguments are given on the command line, then the default is +`--fork-point @{u}` otherwise the `upstream` argument is interpreted literally +unless the `--fork-point` option is specified. + --ignore-whitespace:: --whitespace=<option>:: These flag are passed to the 'git apply' program diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index f373ab4..0a02f70 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -10,7 +10,7 @@ SYNOPSIS [verse] 'git replace' [-f] <object> <replacement> 'git replace' -d <object>... -'git replace' -l [<pattern>] +'git replace' [--format=<format>] [-l [<pattern>]] DESCRIPTION ----------- @@ -70,6 +70,23 @@ OPTIONS Typing "git replace" without arguments, also lists all replace refs. +--format=<format>:: + When listing, use the specified <format>, which can be one of + 'short', 'medium' and 'long'. When omitted, the format + defaults to 'short'. + +FORMATS +------- + +The following format are available: + +* 'short': + <replaced sha1> +* 'medium': + <replaced sha1> -> <replacement sha1> +* 'long': + <replaced sha1> (<replaced type>) -> <replacement sha1> (<replacement type>) + CREATING REPLACEMENT OBJECTS ---------------------------- diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt deleted file mode 100644 index 9ec115b..0000000 --- a/Documentation/git-repo-config.txt +++ /dev/null @@ -1,23 +0,0 @@ -git-repo-config(1) -================== - -NAME ----- -git-repo-config - Get and set repository or global options - - -SYNOPSIS --------- -[verse] -'git repo-config' ... - - -DESCRIPTION ------------ - -This is a synonym for linkgit:git-config[1]. Please refer to the -documentation of that command. - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index d068a65..0d2cdcd 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -50,6 +50,10 @@ Options for --parseopt the first non-option argument. This can be used to parse sub-commands that take options themselves. +--stuck-long:: + Only meaningful in `--parseopt` mode. Output the options in their + long form if available, and with their arguments stuck. + Options for Filtering ~~~~~~~~~~~~~~~~~~~~~ @@ -173,6 +177,20 @@ shown. If the pattern does not contain a globbing character (`?`, character (`?`, `*`, or `[`), it is turned into a prefix match by appending `/*`. +--exclude=<glob-pattern>:: + Do not include refs matching '<glob-pattern>' that the next `--all`, + `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise + consider. Repetitions of this option accumulate exclusion patterns + up to the next `--all`, `--branches`, `--tags`, `--remotes`, or + `--glob` option (other options or arguments do not clear + accumlated patterns). ++ +The patterns given should not begin with `refs/heads`, `refs/tags`, or +`refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, +respectively, and they must begin with `refs/` when applied to `--glob` +or `--all`. If a trailing '/{asterisk}' is intended, it must be given +explicitly. + --disambiguate=<prefix>:: Show every object whose name begins with the given prefix. The <prefix> must be at least 4 hexadecimal digits long to @@ -285,7 +303,9 @@ Each line of options has this format: `<flags>` are of `*`, `=`, `?` or `!`. * Use `=` if the option takes an argument. - * Use `?` to mean that the option is optional (though its use is discouraged). + * Use `?` to mean that the option takes an optional argument. You + probably want to use the `--stuck-long` mode to be able to + unambiguously parse the optional argument. * Use `*` to mean that this option should not be listed in the usage generated for the `-h` argument. It's shown for `--help-all` as diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt index 9d731b4..f1efc11 100644 --- a/Documentation/git-rm.txt +++ b/Documentation/git-rm.txt @@ -170,6 +170,15 @@ of files and subdirectories under the `Documentation/` directory. (i.e. you are listing the files explicitly), it does not remove `subdir/git-foo.sh`. +BUGS +---- +Each time a superproject update removes a populated submodule +(e.g. when switching between commits before and after the removal) a +stale submodule checkout will remain in the old location. Removing the +old directory is only safe when it uses a gitfile, as otherwise the +history of the submodule will be deleted too. This step will be +obsolete when recursive submodule update has been implemented. + SEE ALSO -------- linkgit:git-add[1] diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt deleted file mode 100644 index f7362dc..0000000 --- a/Documentation/git-tar-tree.txt +++ /dev/null @@ -1,82 +0,0 @@ -git-tar-tree(1) -=============== - -NAME ----- -git-tar-tree - Create a tar archive of the files in the named tree object - - -SYNOPSIS --------- -[verse] -'git tar-tree' [--remote=<repo>] <tree-ish> [ <base> ] - -DESCRIPTION ------------ -THIS COMMAND IS DEPRECATED. Use 'git archive' with `--format=tar` -option instead (and move the <base> argument to `--prefix=base/`). - -Creates a tar archive containing the tree structure for the named tree. -When <base> is specified it is added as a leading path to the files in the -generated tar archive. - -'git tar-tree' behaves differently when given a tree ID versus when given -a commit ID or tag ID. In the first case the current time is used as -modification time of each file in the archive. In the latter case the -commit time as recorded in the referenced commit object is used instead. -Additionally the commit ID is stored in a global extended pax header. -It can be extracted using 'git get-tar-commit-id'. - -OPTIONS -------- - -<tree-ish>:: - The tree or commit to produce tar archive for. If it is - the object name of a commit object. - -<base>:: - Leading path to the files in the resulting tar archive. - ---remote=<repo>:: - Instead of making a tar archive from local repository, - retrieve a tar archive from a remote repository. - -CONFIGURATION -------------- - -tar.umask:: - This variable can be used to restrict the permission bits of - tar archive entries. The default is 0002, which turns off the - world write bit. The special value "user" indicates that the - archiving user's umask will be used instead. See umask(2) for - details. - -EXAMPLES --------- -`git tar-tree HEAD junk | (cd /var/tmp/ && tar xf -)`:: - - Create a tar archive that contains the contents of the - latest commit on the current branch, and extracts it in - `/var/tmp/junk` directory. - -`git tar-tree v1.4.0 git-1.4.0 | gzip >git-1.4.0.tar.gz`:: - - Create a tarball for v1.4.0 release. - -`git tar-tree v1.4.0^{tree} git-1.4.0 | gzip >git-1.4.0.tar.gz`:: - - Create a tarball for v1.4.0 release, but without a - global extended pax header. - -`git tar-tree --remote=example.com:git.git v1.4.0 >git-1.4.0.tar`:: - - Get a tarball v1.4.0 from example.com. - -`git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar`:: - - Put everything in the current head's Documentation/ directory - into 'git-1.4.0-docs.tar', with the prefix 'git-docs/'. - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git.txt b/Documentation/git.txt index b73a24a..274d816 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -43,14 +43,18 @@ unreleased) version of Git, that is available from 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v1.8.5/git.html[documentation for release 1.8.5] +* link:v1.8.5.3/git.html[documentation for release 1.8.5.3] * release notes for + link:RelNotes/1.8.5.3.txt[1.8.5.3], + link:RelNotes/1.8.5.2.txt[1.8.5.2], + link:RelNotes/1.8.5.1.txt[1.8.5.1], link:RelNotes/1.8.5.txt[1.8.5]. -* link:v1.8.4.4/git.html[documentation for release 1.8.4.4] +* link:v1.8.4.5/git.html[documentation for release 1.8.4.5] * release notes for + link:RelNotes/1.8.4.5.txt[1.8.4.5], link:RelNotes/1.8.4.4.txt[1.8.4.4], link:RelNotes/1.8.4.3.txt[1.8.4.3], link:RelNotes/1.8.4.2.txt[1.8.4.2], @@ -804,6 +808,15 @@ temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. + For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 parameter, <path>. ++ +For each path 'GIT_EXTERNAL_DIFF' is called, two environment variables, +'GIT_DIFF_PATH_COUNTER' and 'GIT_DIFF_PATH_TOTAL' are set. + +'GIT_DIFF_PATH_COUNTER':: + A 1-based counter incremented by one for every path. + +'GIT_DIFF_PATH_TOTAL':: + The total number of paths. other ~~~~~ diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt index 3146413..3f33ca5 100644 --- a/Documentation/gitcli.txt +++ b/Documentation/gitcli.txt @@ -72,23 +72,23 @@ scripting Git: * splitting short options to separate words (prefer `git foo -a -b` to `git foo -ab`, the latter may not even work). - * when a command line option takes an argument, use the 'sticked' form. In + * when a command line option takes an argument, use the 'stuck' form. In other words, write `git foo -oArg` instead of `git foo -o Arg` for short options, and `git foo --long-opt=Arg` instead of `git foo --long-opt Arg` for long options. An option that takes optional option-argument must be - written in the 'sticked' form. + written in the 'stuck' form. * when you give a revision parameter to a command, make sure the parameter is not ambiguous with a name of a file in the work tree. E.g. do not write `git log -1 HEAD` but write `git log -1 HEAD --`; the former will not work if you happen to have a file called `HEAD` in the work tree. - * many commands allow a long option "--option" to be abbreviated + * many commands allow a long option `--option` to be abbreviated only to their unique prefix (e.g. if there is no other option - whose name begins with "opt", you may be able to spell "--opt" to - invoke the "--option" flag), but you should fully spell them out + whose name begins with `opt`, you may be able to spell `--opt` to + invoke the `--option` flag), but you should fully spell them out when writing your scripts; later versions of Git may introduce a - new option whose name shares the same prefix, e.g. "--optimize", + new option whose name shares the same prefix, e.g. `--optimize`, to make a short prefix that used to be unique no longer unique. @@ -149,7 +149,7 @@ prefix of a long option as if it is fully spelled out, but use this with a caution. For example, `git commit --amen` behaves as if you typed `git commit --amend`, but that is true only until a later version of Git introduces another option that shares the same prefix, -e.g `git commit --amenity" option. +e.g. `git commit --amenity` option. Separating argument from the option @@ -165,7 +165,7 @@ $ git foo -o Arg ---------------------------- However, this is *NOT* allowed for switches with an optional value, where the -'sticked' form must be used: +'stuck' form must be used: ---------------------------- $ git describe --abbrev HEAD # correct $ git describe --abbrev=10 HEAD # correct diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index f971960..205e80e 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -79,8 +79,10 @@ PATTERN FORMAT - An optional prefix "`!`" which negates the pattern; any matching file excluded by a previous pattern will become - included again. If a negated pattern matches, this will - override lower precedence patterns sources. + included again. It is not possible to re-include a file if a parent + directory of that file is excluded. Git doesn't list excluded + directories for performance reasons, so any patterns on contained + files have no effect, no matter where they are defined. Put a backslash ("`\`") in front of the first "`!`" for patterns that begin with a literal "`!`", for example, "`\!important!.txt`". @@ -182,6 +184,19 @@ Another example: The second .gitignore prevents Git from ignoring `arch/foo/kernel/vmlinux.lds.S`. +Example to exclude everything except a specific directory `foo/bar` +(note the `/*` - without the slash, the wildcard would also exclude +everything within `foo/bar`): + +-------------------------------------------------------------- + $ cat .gitignore + # exclude everything except directory foo/bar + /* + !/foo + /foo/* + !/foo/bar +-------------------------------------------------------------- + SEE ALSO -------- linkgit:git-rm[1], diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index f7be93f..347a9f7 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -35,6 +35,8 @@ submodule.<name>.url:: linkgit:git-clone[1] or (if it begins with ./ or ../) a location relative to the superproject's origin repository. +In addition, there are a number of optional keys: + submodule.<name>.update:: Defines what to do when the submodule is updated by the superproject. If 'checkout' (the default), the new commit specified in the diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index e2113d9..db4154f 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -849,6 +849,43 @@ time zones in the form of "+/-HHMM", such as "+0200". + Project specific override is not supported. +extra-branch-refs:: + List of additional directories under "refs" which are going to + be used as branch refs. For example if you have a gerrit setup + where all branches under refs/heads/ are official, + push-after-review ones and branches under refs/sandbox/, + refs/wip and refs/other are user ones where permissions are + much wider, then you might want to set this variable as + follows: ++ +-------------------------------------------------------------------------------- +$feature{'extra-branch-refs'}{'default'} = + ['sandbox', 'wip', 'other']; +-------------------------------------------------------------------------------- ++ +This feature can be configured on per-repository basis after setting +$feature{'extra-branch-refs'}{'override'} to true, via repository's +`gitweb.extraBranchRefs` configuration variable, which contains a +space separated list of refs. An example: ++ +-------------------------------------------------------------------------------- +[gitweb] + extraBranchRefs = sandbox wip other +-------------------------------------------------------------------------------- ++ +The gitweb.extraBranchRefs is actually a multi-valued configuration +variable, so following example is also correct and the result is the +same as of the snippet above: ++ +-------------------------------------------------------------------------------- +[gitweb] + extraBranchRefs = sandbox + extraBranchRefs = wip other +-------------------------------------------------------------------------------- ++ +It is an error to specify a ref that does not pass "git check-ref-format" +scrutiny. Duplicated values are filtered. + EXAMPLES -------- diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index e470661..378306f 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -323,24 +323,26 @@ including Documentation/chapter_1/figure_1.jpg. A pathspec that begins with a colon `:` has special meaning. In the short form, the leading colon `:` is followed by zero or more "magic signature" letters (which optionally is terminated by another colon `:`), -and the remainder is the pattern to match against the path. The optional -colon that terminates the "magic signature" can be omitted if the pattern -begins with a character that cannot be a "magic signature" and is not a -colon. +and the remainder is the pattern to match against the path. +The "magic signature" consists of ASCII symbols that are neither +alphanumeric, glob, regex special charaters nor colon. +The optional colon that terminates the "magic signature" can be +omitted if the pattern begins with a character that does not belong to +"magic signature" symbol set and is not a colon. + In the long form, the leading colon `:` is followed by a open parenthesis `(`, a comma-separated list of zero or more "magic words", and a close parentheses `)`, and the remainder is the pattern to match against the path. + -The "magic signature" consists of an ASCII symbol that is not -alphanumeric. +A pathspec with only a colon means "there is no pathspec". This form +should not be combined with other pathspec. + -- -top `/`;; - The magic word `top` (mnemonic: `/`) makes the pattern match - from the root of the working tree, even when you are running - the command from inside a subdirectory. +top;; + The magic word `top` (magic signature: `/`) makes the pattern + match from the root of the working tree, even when you are + running the command from inside a subdirectory. literal;; Wildcards in the pattern such as `*` or `?` are treated @@ -362,12 +364,12 @@ full pathname may have special meaning: - A leading "`**`" followed by a slash means match in all directories. For example, "`**/foo`" matches file or directory - "`foo`" anywhere, the same as pattern "`foo`". "**/foo/bar" + "`foo`" anywhere, the same as pattern "`foo`". "`**/foo/bar`" matches file or directory "`bar`" anywhere that is directly under directory "`foo`". - - A trailing "/**" matches everything inside. For example, - "abc/**" matches all files inside directory "abc", relative + - A trailing "`/**`" matches everything inside. For example, + "`abc/**`" matches all files inside directory "abc", relative to the location of the `.gitignore` file, with infinite depth. - A slash followed by two consecutive asterisks then a slash @@ -377,14 +379,12 @@ full pathname may have special meaning: - Other consecutive asterisks are considered invalid. + Glob magic is incompatible with literal magic. + +exclude;; + After a path matches any non-exclude pathspec, it will be run + through all exclude pathspec (magic signature: `!`). If it + matches, the path is ignored. -- -+ -Currently only the slash `/` is recognized as the "magic signature", -but it is envisioned that we will support more types of magic in later -versions of Git. -+ -A pathspec with only a colon means "there is no pathspec". This form -should not be combined with other pathspec. [[def_parent]]parent:: A <<def_commit_object,commit object>> contains a (possibly empty) list diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 49a9a7d..fb6e593 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -113,3 +113,11 @@ subtree:: match the tree structure of A, instead of reading the trees at the same level. This adjustment is also done to the common ancestor tree. + +With the strategies that use 3-way merge (including the default, 'recursive'), +if a change is made on both branches, but later reverted on one of the +branches, that change will be present in the merged result; some people find +this behavior confusing. It occurs because only the heads and the merge base +are considered when performing a merge, not the individual commits. The merge +algorithm therefore considers the reverted change as no change at all, and +substitutes the changed version instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index ec86d09..03533af 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -18,33 +18,27 @@ ordering and formatting options, such as `--reverse`. -<number>:: -n <number>:: --max-count=<number>:: - Limit the number of commits to output. --skip=<number>:: - Skip 'number' commits before starting to show the commit output. --since=<date>:: --after=<date>:: - Show commits more recent than a specific date. --until=<date>:: --before=<date>:: - Show commits older than a specific date. ifdef::git-rev-list[] --max-age=<timestamp>:: --min-age=<timestamp>:: - Limit the commits output to specified time range. endif::git-rev-list[] --author=<pattern>:: --committer=<pattern>:: - Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). With more than one `--author=<pattern>`, @@ -52,7 +46,6 @@ endif::git-rev-list[] chosen (similarly for multiple `--committer=<pattern>`). --grep-reflog=<pattern>:: - Limit the commits output to ones with reflog entries that match the specified pattern (regular expression). With more than one `--grep-reflog`, commits whose reflog message @@ -60,7 +53,6 @@ endif::git-rev-list[] error to use this option unless `--walk-reflogs` is in use. --grep=<pattern>:: - Limit the commits output to ones with log message that matches the specified pattern (regular expression). With more than one `--grep=<pattern>`, commits whose message @@ -71,46 +63,39 @@ When `--show-notes` is in effect, the message from the notes as if it is part of the log message. --all-match:: - Limit the commits output to ones that match all given --grep, + Limit the commits output to ones that match all given `--grep`, instead of ones that match at least one. -i:: --regexp-ignore-case:: - - Match the regexp limiting patterns without regard to letters case. + Match the regular expression limiting patterns without regard to letter + case. --basic-regexp:: - Consider the limiting patterns to be basic regular expressions; this is the default. -E:: --extended-regexp:: - Consider the limiting patterns to be extended regular expressions instead of the default basic regular expressions. -F:: --fixed-strings:: - Consider the limiting patterns to be fixed strings (don't interpret pattern as a regular expression). --perl-regexp:: - - Consider the limiting patterns to be Perl-compatible regexp. + Consider the limiting patterns to be Perl-compatible regular expressions. Requires libpcre to be compiled in. --remove-empty:: - Stop when a given path disappears from the tree. --merges:: - Print only merge commits. This is exactly the same as `--min-parents=2`. --no-merges:: - Do not print commits with more than one parent. This is exactly the same as `--max-parents=1`. @@ -118,7 +103,6 @@ if it is part of the log message. --max-parents=<number>:: --no-min-parents:: --no-max-parents:: - Show only commits which have at least (or at most) that many parent commits. In particular, `--max-parents=1` is the same as `--no-merges`, `--min-parents=2` is the same as `--merges`. `--max-parents=0` @@ -138,31 +122,26 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). brought in to your history by such a merge. --not:: - Reverses the meaning of the '{caret}' prefix (or lack thereof) - for all following revision specifiers, up to the next '--not'. + for all following revision specifiers, up to the next `--not`. --all:: - Pretend as if all the refs in `refs/` are listed on the command line as '<commit>'. --branches[=<pattern>]:: - Pretend as if all the refs in `refs/heads` are listed on the command line as '<commit>'. If '<pattern>' is given, limit branches to ones matching given shell glob. If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. --tags[=<pattern>]:: - Pretend as if all the refs in `refs/tags` are listed on the command line as '<commit>'. If '<pattern>' is given, limit tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. --remotes[=<pattern>]:: - Pretend as if all the refs in `refs/remotes` are listed on the command line as '<commit>'. If '<pattern>' is given, limit remote-tracking branches to ones matching given shell glob. @@ -174,14 +153,27 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). is automatically prepended if missing. If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. ---ignore-missing:: +--exclude=<glob-pattern>:: + Do not include refs matching '<glob-pattern>' that the next `--all`, + `--branches`, `--tags`, `--remotes`, or `--glob` would otherwise + consider. Repetitions of this option accumulate exclusion patterns + up to the next `--all`, `--branches`, `--tags`, `--remotes`, or + `--glob` option (other options or arguments do not clear + accumlated patterns). ++ +The patterns given should not begin with `refs/heads`, `refs/tags`, or +`refs/remotes` when applied to `--branches`, `--tags`, or `--remotes`, +respectively, and they must begin with `refs/` when applied to `--glob` +or `--all`. If a trailing '/{asterisk}' is intended, it must be given +explicitly. + +--ignore-missing:: Upon seeing an invalid object name in the input, pretend as if the bad input was not given. ifndef::git-rev-list[] --bisect:: - Pretend as if the bad bisection ref `refs/bisect/bad` was listed and as if it was followed by `--not` and the good bisection refs `refs/bisect/good-*` on the command @@ -189,7 +181,6 @@ ifndef::git-rev-list[] endif::git-rev-list[] --stdin:: - In addition to the '<commit>' listed on the command line, read them from the standard input. If a '--' separator is seen, stop reading commits and start reading paths to limit the @@ -197,36 +188,32 @@ endif::git-rev-list[] ifdef::git-rev-list[] --quiet:: - Don't print anything to standard output. This form is primarily meant to allow the caller to test the exit status to see if a range of objects is fully connected (or not). It is faster than redirecting stdout - to /dev/null as the output does not have to be formatted. + to `/dev/null` as the output does not have to be formatted. endif::git-rev-list[] --cherry-mark:: - Like `--cherry-pick` (see below) but mark equivalent commits with `=` rather than omitting them, and inequivalent ones with `+`. --cherry-pick:: - Omit any commit that introduces the same change as - another commit on the "other side" when the set of + another commit on the ``other side'' when the set of commits are limited with symmetric difference. + For example, if you have two branches, `A` and `B`, a usual way to list all commits on only one side of them is with `--left-right` (see the example below in the description of -the `--left-right` option). It however shows the commits that were cherry-picked -from the other branch (for example, "3rd on b" may be cherry-picked -from branch A). With this option, such pairs of commits are +the `--left-right` option). However, it shows the commits that were +cherry-picked from the other branch (for example, ``3rd on b'' may be +cherry-picked from branch A). With this option, such pairs of commits are excluded from the output. --left-only:: --right-only:: - List only commits on the respective side of a symmetric range, i.e. only those which would be marked `<` resp. `>` by `--left-right`. @@ -238,7 +225,6 @@ More precisely, `--cherry-pick --right-only --no-merges` gives the exact list. --cherry:: - A synonym for `--right-only --cherry-mark --no-merges`; useful to limit the output to the commits on our side and mark those that have been applied to the other side of a forked history with @@ -247,30 +233,27 @@ list. -g:: --walk-reflogs:: - Instead of walking the commit ancestry chain, walk reflog entries from the most recent one to older ones. When this option is used you cannot specify commits to exclude (that is, '{caret}commit', 'commit1..commit2', nor 'commit1\...commit2' notations cannot be used). + -With '\--pretty' format other than oneline (for obvious reasons), +With `--pretty` format other than `oneline` (for obvious reasons), this causes the output to have two extra lines of information taken from the reflog. By default, 'commit@\{Nth}' notation is used in the output. When the starting commit is specified as 'commit@\{now}', output also uses 'commit@\{timestamp}' notation -instead. Under '\--pretty=oneline', the commit message is +instead. Under `--pretty=oneline`, the commit message is prefixed with this information on the same line. -This option cannot be combined with '\--reverse'. +This option cannot be combined with `--reverse`. See also linkgit:git-reflog[1]. --merge:: - After a failed merge, show refs that touch files having a conflict and don't exist on all heads to merge. --boundary:: - Output excluded boundary commits. Boundary commits are prefixed with `-`. @@ -287,11 +270,9 @@ is how to do it, as there are various strategies to simplify the history. The following options select the commits to be shown: <paths>:: - Commits modifying the given <paths> are selected. --simplify-by-decoration:: - Commits that are referred by some branch or tag are selected. Note that extra commits can be shown to give a meaningful history. @@ -299,33 +280,27 @@ Note that extra commits can be shown to give a meaningful history. The following options affect the way the simplification is performed: Default mode:: - Simplifies the history to the simplest history explaining the final state of the tree. Simplest because it prunes some side branches if the end result is the same (i.e. merging branches with the same content) --full-history:: - Same as the default mode, but does not prune some history. --dense:: - Only the selected commits are shown, plus some to have a meaningful history. --sparse:: - All commits in the simplified history are shown. --simplify-merges:: - - Additional option to '--full-history' to remove some needless + Additional option to `--full-history` to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge. --ancestry-path:: - When given a range of commits to display (e.g. 'commit1..commit2' or 'commit2 {caret}commit1'), only display commits that exist directly on the ancestry chain between the 'commit1' and @@ -352,36 +327,35 @@ The horizontal line of history A---Q is taken to be the first parent of each merge. The commits are: * `I` is the initial commit, in which `foo` exists with contents - "asdf", and a file `quux` exists with contents "quux". Initial + ``asdf'', and a file `quux` exists with contents ``quux''. Initial commits are compared to an empty tree, so `I` is !TREESAME. -* In `A`, `foo` contains just "foo". +* In `A`, `foo` contains just ``foo''. * `B` contains the same change as `A`. Its merge `M` is trivial and hence TREESAME to all parents. -* `C` does not change `foo`, but its merge `N` changes it to "foobar", +* `C` does not change `foo`, but its merge `N` changes it to ``foobar'', so it is not TREESAME to any parent. -* `D` sets `foo` to "baz". Its merge `O` combines the strings from - `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent. +* `D` sets `foo` to ``baz''. Its merge `O` combines the strings from + `N` and `D` to ``foobarbaz''; i.e., it is not TREESAME to any parent. -* `E` changes `quux` to "xyzzy", and its merge `P` combines the - strings to "quux xyzzy". `P` is TREESAME to `O`, but not to `E`. +* `E` changes `quux` to ``xyzzy'', and its merge `P` combines the + strings to ``quux xyzzy''. `P` is TREESAME to `O`, but not to `E`. * `X` is an independent root commit that added a new file `side`, and `Y` modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and `Q` is TREESAME to `P`, but not to `Y`. -'rev-list' walks backwards through history, including or excluding -commits based on whether '\--full-history' and/or parent rewriting -(via '\--parents' or '\--children') are used. The following settings +`rev-list` walks backwards through history, including or excluding +commits based on whether `--full-history` and/or parent rewriting +(via `--parents` or `--children`) are used. The following settings are available. Default mode:: - Commits are included if they are not TREESAME to any parent - (though this can be changed, see '\--sparse' below). If the + (though this can be changed, see `--sparse` below). If the commit was a merge, and it was TREESAME to one parent, follow only that parent. (Even if there are several TREESAME parents, follow only one of them.) Otherwise, follow all @@ -400,12 +374,11 @@ available, removed `B` from consideration entirely. `C` was considered via `N`, but is TREESAME. Root commits are compared to an empty tree, so `I` is !TREESAME. + -Parent/child relations are only visible with --parents, but that does +Parent/child relations are only visible with `--parents`, but that does not affect the commits selected in default mode, so we have shown the parent lines. --full-history without parent rewriting:: - This mode differs from the default in one point: always follow all parents of a merge, even if it is TREESAME to one of them. Even if more than one side of the merge has commits that are @@ -425,9 +398,8 @@ about the parent/child relationships between the commits, so we show them disconnected. --full-history with parent rewriting:: - Ordinary commits are only included if they are !TREESAME - (though this can be changed, see '\--sparse' below). + (though this can be changed, see `--sparse` below). + Merges are always included. However, their parent list is rewritten: Along each parent, prune away commits that are not included @@ -441,7 +413,7 @@ themselves. This results in `-------------' ----------------------------------------------------------------------- + -Compare to '\--full-history' without rewriting above. Note that `E` +Compare to `--full-history` without rewriting above. Note that `E` was pruned away because it is TREESAME, but the parent list of P was rewritten to contain `E`'s parent `I`. The same happened for `C` and `N`, and `X`, `Y` and `Q`. @@ -450,22 +422,19 @@ In addition to the above settings, you can change whether TREESAME affects inclusion: --dense:: - Commits that are walked are included if they are not TREESAME to any parent. --sparse:: - All commits that are walked are included. + -Note that without '\--full-history', this still simplifies merges: if +Note that without `--full-history`, this still simplifies merges: if one of the parents is TREESAME, we follow only that one, so the other sides of the merge are never walked. --simplify-merges:: - First, build a history graph in the same way that - '\--full-history' with parent rewriting does (see above). + `--full-history` with parent rewriting does (see above). + Then simplify each commit `C` to its replacement `C'` in the final history according to the following rules: @@ -484,7 +453,7 @@ history according to the following rules: -- + The effect of this is best shown by way of comparing to -'\--full-history' with parent rewriting. The example turns into: +`--full-history` with parent rewriting. The example turns into: + ----------------------------------------------------------------------- .-A---M---N---O @@ -494,7 +463,7 @@ The effect of this is best shown by way of comparing to `---------' ----------------------------------------------------------------------- + -Note the major differences in `N`, `P` and `Q` over '--full-history': +Note the major differences in `N`, `P`, and `Q` over `--full-history`: + -- * `N`'s parent list had `I` removed, because it is an ancestor of the @@ -511,11 +480,10 @@ Note the major differences in `N`, `P` and `Q` over '--full-history': Finally, there is a fifth simplification mode available: --ancestry-path:: - Limit the displayed commits to those directly on the ancestry - chain between the "from" and "to" commits in the given commit - range. I.e. only display commits that are ancestor of the "to" - commit, and descendants of the "from" commit. + chain between the ``from'' and ``to'' commits in the given commit + range. I.e. only display commits that are ancestor of the ``to'' + commit and descendants of the ``from'' commit. + As an example use case, consider the following commit history: + @@ -530,14 +498,14 @@ As an example use case, consider the following commit history: A regular 'D..M' computes the set of commits that are ancestors of `M`, but excludes the ones that are ancestors of `D`. This is useful to see what happened to the history leading to `M` since `D`, in the sense -that "what does `M` have that did not exist in `D`". The result in this +that ``what does `M` have that did not exist in `D`''. The result in this example would be all the commits, except `A` and `B` (and `D` itself, of course). + When we want to find out what commits in `M` are contaminated with the bug introduced by `D` and need fixing, however, we might want to view only the subset of 'D..M' that are actually descendants of `D`, i.e. -excluding `C` and `K`. This is exactly what the '--ancestry-path' +excluding `C` and `K`. This is exactly what the `--ancestry-path` option does. Applied to the 'D..M' range, it results in: + ----------------------------------------------------------------------- @@ -548,7 +516,7 @@ option does. Applied to the 'D..M' range, it results in: L--M ----------------------------------------------------------------------- -The '\--simplify-by-decoration' option allows you to view only the +The `--simplify-by-decoration` option allows you to view only the big picture of the topology of the history, by omitting commits that are not referenced by tags. Commits are marked as !TREESAME (in other words, kept after history simplification rules described @@ -561,50 +529,47 @@ Bisection Helpers ~~~~~~~~~~~~~~~~~ --bisect:: - -Limit output to the one commit object which is roughly halfway between -included and excluded commits. Note that the bad bisection ref -`refs/bisect/bad` is added to the included commits (if it -exists) and the good bisection refs `refs/bisect/good-*` are -added to the excluded commits (if they exist). Thus, supposing there -are no refs in `refs/bisect/`, if - + Limit output to the one commit object which is roughly halfway between + included and excluded commits. Note that the bad bisection ref + `refs/bisect/bad` is added to the included commits (if it + exists) and the good bisection refs `refs/bisect/good-*` are + added to the excluded commits (if they exist). Thus, supposing there + are no refs in `refs/bisect/`, if ++ ----------------------------------------------------------------------- $ git rev-list --bisect foo ^bar ^baz ----------------------------------------------------------------------- - ++ outputs 'midpoint', the output of the two commands - ++ ----------------------------------------------------------------------- $ git rev-list foo ^midpoint $ git rev-list midpoint ^bar ^baz ----------------------------------------------------------------------- - ++ would be of roughly the same length. Finding the change which introduces a regression is thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the commit chain is of length one. --bisect-vars:: - -This calculates the same as `--bisect`, except that refs in -`refs/bisect/` are not used, and except that this outputs -text ready to be eval'ed by the shell. These lines will assign the -name of the midpoint revision to the variable `bisect_rev`, and the -expected number of commits to be tested after `bisect_rev` is tested -to `bisect_nr`, the expected number of commits to be tested if -`bisect_rev` turns out to be good to `bisect_good`, the expected -number of commits to be tested if `bisect_rev` turns out to be bad to -`bisect_bad`, and the number of commits we are bisecting right now to -`bisect_all`. + This calculates the same as `--bisect`, except that refs in + `refs/bisect/` are not used, and except that this outputs + text ready to be eval'ed by the shell. These lines will assign the + name of the midpoint revision to the variable `bisect_rev`, and the + expected number of commits to be tested after `bisect_rev` is tested + to `bisect_nr`, the expected number of commits to be tested if + `bisect_rev` turns out to be good to `bisect_good`, the expected + number of commits to be tested if `bisect_rev` turns out to be bad to + `bisect_bad`, and the number of commits we are bisecting right now to + `bisect_all`. --bisect-all:: - -This outputs all the commit objects between the included and excluded -commits, ordered by their distance to the included and excluded -commits. Refs in `refs/bisect/` are not used. The farthest -from them is displayed first. (This is the only one displayed by -`--bisect`.) + This outputs all the commit objects between the included and excluded + commits, ordered by their distance to the included and excluded + commits. Refs in `refs/bisect/` are not used. The farthest + from them is displayed first. (This is the only one displayed by + `--bisect`.) + This is useful because it makes it easy to choose a good commit to test when you want to avoid to test some of them for some reason (they @@ -654,9 +619,8 @@ avoid showing the commits from two parallel development track mixed together. --reverse:: - Output the commits in reverse order. - Cannot be combined with '\--walk-reflogs'. + Cannot be combined with `--walk-reflogs`. Object Traversal ~~~~~~~~~~~~~~~~ @@ -664,37 +628,32 @@ Object Traversal These options are mostly targeted for packing of Git repositories. --objects:: - Print the object IDs of any object referenced by the listed - commits. '--objects foo ^bar' thus means "send me + commits. `--objects foo ^bar` thus means ``send me all object IDs which I need to download if I have the commit - object 'bar', but not 'foo'". + object _bar_ but not _foo_''. --objects-edge:: - - Similar to '--objects', but also print the IDs of excluded - commits prefixed with a "-" character. This is used by - linkgit:git-pack-objects[1] to build "thin" pack, which records + Similar to `--objects`, but also print the IDs of excluded + commits prefixed with a ``-'' character. This is used by + linkgit:git-pack-objects[1] to build ``thin'' pack, which records objects in deltified form based on objects contained in these excluded commits to reduce network traffic. --unpacked:: - - Only useful with '--objects'; print the object IDs that are not + Only useful with `--objects`; print the object IDs that are not in packs. --no-walk[=(sorted|unsorted)]:: - Only show the given commits, but do not traverse their ancestors. This has no effect if a range is specified. If the argument - "unsorted" is given, the commits are show in the order they were - given on the command line. Otherwise (if "sorted" or no argument - was given), the commits are show in reverse chronological order + `unsorted` is given, the commits are shown in the order they were + given on the command line. Otherwise (if `sorted` or no argument + was given), the commits are shown in reverse chronological order by commit time. --do-walk:: - - Overrides a previous --no-walk. + Overrides a previous `--no-walk`. Commit Formatting ~~~~~~~~~~~~~~~~~ @@ -708,26 +667,24 @@ endif::git-rev-list[] include::pretty-options.txt[] --relative-date:: - Synonym for `--date=relative`. --date=(relative|local|default|iso|rfc|short|raw):: - Only takes effect for dates shown in human-readable format, such - as when using "--pretty". `log.date` config variable sets a default - value for log command's --date option. + as when using `--pretty`. `log.date` config variable sets a default + value for the log command's `--date` option. + `--date=relative` shows dates relative to the current time, -e.g. "2 hours ago". +e.g. ``2 hours ago''. + `--date=local` shows timestamps in user's local time zone. + `--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. + `--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 -format, often found in E-mail messages. +format, often found in email messages. + -`--date=short` shows only date but not time, in `YYYY-MM-DD` format. +`--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. + `--date=raw` shows the date in the internal raw Git format `%s %z` format. + @@ -736,18 +693,15 @@ format, often found in E-mail messages. ifdef::git-rev-list[] --header:: - Print the contents of the commit in raw-format; each record is separated with a NUL character. endif::git-rev-list[] --parents:: - Print also the parents of the commit (in the form "commit parent..."). Also enables parent rewriting, see 'History Simplification' below. --children:: - Print also the children of the commit (in the form "commit child..."). Also enables parent rewriting, see 'History Simplification' below. @@ -757,7 +711,6 @@ ifdef::git-rev-list[] endif::git-rev-list[] --left-right:: - Mark which side of a symmetric diff a commit is reachable from. Commits from the left side are prefixed with `<` and those from the right with `>`. If combined with `--boundary`, those @@ -787,7 +740,6 @@ you would get an output like this: ----------------------------------------------------------------------- --graph:: - Draw a text-based graphical representation of the commit history on the left hand side of the output. This may cause extra lines to be printed in between commits, in order for the graph history @@ -795,31 +747,29 @@ you would get an output like this: + This enables parent rewriting, see 'History Simplification' below. + -This implies the '--topo-order' option by default, but the -'--date-order' option may also be specified. +This implies the `--topo-order` option by default, but the +`--date-order` option may also be specified. ifdef::git-rev-list[] --count:: Print a number stating how many commits would have been listed, and suppress all other output. When used together - with '--left-right', instead print the counts for left and + with `--left-right`, instead print the counts for left and right commits, separated by a tab. When used together with - '--cherry-mark', omit patch equivalent commits from these + `--cherry-mark`, omit patch equivalent commits from these counts and print the count for equivalent commits separated by a tab. endif::git-rev-list[] - ifndef::git-rev-list[] Diff Formatting ~~~~~~~~~~~~~~~ -Below are listed options that control the formatting of diff output. +Listed below are options that control the formatting of diff output. Some of them are specific to linkgit:git-rev-list[1], however other diff options may be given. See linkgit:git-diff-files[1] for more options. -c:: - With this option, diff output for a merge commit shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent @@ -827,26 +777,22 @@ options may be given. See linkgit:git-diff-files[1] for more options. which were modified from all parents. --cc:: - - This flag implies the '-c' option and further compresses the + This flag implies the `-c` option and further compresses the patch output by omitting uninteresting hunks whose contents in the parents have only two variants and the merge result picks one of them without modification. -m:: - This flag makes the merge commits show the full diff like regular commits; for each merge parent, a separate log entry and diff is generated. An exception is that only diff against - the first parent is shown when '--first-parent' option is given; + the first parent is shown when `--first-parent` option is given; in that case, the output represents the changes the merge brought _into_ the then-current branch. -r:: - Show recursive diffs. -t:: - - Show the tree objects in the diff output. This implies '-r'. + Show the tree objects in the diff output. This implies `-r`. endif::git-rev-list[] diff --git a/Documentation/technical/api-builtin.txt b/Documentation/technical/api-builtin.txt index f3c1357..e3d6e7a 100644 --- a/Documentation/technical/api-builtin.txt +++ b/Documentation/technical/api-builtin.txt @@ -14,8 +14,8 @@ Git: . Add the external declaration for the function to `builtin.h`. -. Add the command to `commands[]` table in `handle_internal_command()`, - defined in `git.c`. The entry should look like: +. Add the command to the `commands[]` table defined in `git.c`. + The entry should look like: { "foo", cmd_foo, <options> }, + diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 0be2b51..be50cf4 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -29,9 +29,9 @@ that allow to change the behavior of a command. The parse-options API allows: -* 'sticked' and 'separate form' of options with arguments. - `-oArg` is sticked, `-o Arg` is separate form. - `--option=Arg` is sticked, `--option Arg` is separate form. +* 'stuck' and 'separate form' of options with arguments. + `-oArg` is stuck, `-o Arg` is separate form. + `--option=Arg` is stuck, `--option Arg` is separate form. * Long options may be 'abbreviated', as long as the abbreviation is unambiguous. diff --git a/Documentation/technical/api-ref-iteration.txt b/Documentation/technical/api-ref-iteration.txt index aa1c50f..02adfd4 100644 --- a/Documentation/technical/api-ref-iteration.txt +++ b/Documentation/technical/api-ref-iteration.txt @@ -50,10 +50,10 @@ submodules object database. You can do this by a code-snippet like this: const char *path = "path/to/submodule" - if (!add_submodule_odb(path)) + if (add_submodule_odb(path)) die("Error submodule '%s' not populated.", path); -`add_submodule_odb()` will return an non-zero value on success. If you +`add_submodule_odb()` will return zero on success. If you do not do this you will get an error for each ref that it does not point to a valid object. diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt index 4be8776..5d245aa 100644 --- a/Documentation/technical/api-remote.txt +++ b/Documentation/technical/api-remote.txt @@ -58,16 +58,16 @@ default remote, given the current branch and configuration. struct refspec -------------- -A struct refspec holds the parsed interpretation of a refspec. If it -will force updates (starts with a '+'), force is true. If it is a -pattern (sides end with '*') pattern is true. src and dest are the two -sides (if a pattern, only the part outside of the wildcards); if there -is only one side, it is src, and dst is NULL; if sides exist but are -empty (i.e., the refspec either starts or ends with ':'), the -corresponding side is "". - -This parsing can be done to an array of strings to give an array of -struct refpsecs with parse_ref_spec(). +A struct refspec holds the parsed interpretation of a refspec. If it +will force updates (starts with a '+'), force is true. If it is a +pattern (sides end with '*') pattern is true. src and dest are the +two sides (including '*' characters if present); if there is only one +side, it is src, and dst is NULL; if sides exist but are empty (i.e., +the refspec either starts or ends with ':'), the corresponding side is +"". + +An array of strings can be parsed into an array of struct refspecs +using parse_fetch_refspec() or parse_push_refspec(). remote_find_tracking(), given a remote and a struct refspec with either src or dst filled out, will fill out the other such that the diff --git a/Documentation/technical/http-protocol.txt b/Documentation/technical/http-protocol.txt index caf941a..d21d77d 100644 --- a/Documentation/technical/http-protocol.txt +++ b/Documentation/technical/http-protocol.txt @@ -307,7 +307,7 @@ Clients MUST first perform ref discovery with S: ....ACK %s, continue S: ....NAK -Clients MUST NOT reuse or revalidate a cached reponse. +Clients MUST NOT reuse or revalidate a cached response. Servers MUST include sufficient Cache-Control headers to prevent caching of the response. @@ -468,7 +468,7 @@ Clients MUST first perform ref discovery with S: S: .... -Clients MUST NOT reuse or revalidate a cached reponse. +Clients MUST NOT reuse or revalidate a cached response. Servers MUST include sufficient Cache-Control headers to prevent caching of the response. diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt index b7bd951..95a07db 100644 --- a/Documentation/technical/pack-heuristics.txt +++ b/Documentation/technical/pack-heuristics.txt @@ -1,5 +1,5 @@ - Concerning Git's Packing Heuristics - =================================== +Concerning Git's Packing Heuristics +=================================== Oh, here's a really stupid question: diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index fd8ffa5..e3e7924 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -72,14 +72,29 @@ interleaved with S-R-Q. thin-pack --------- -This capability means that the server can send a 'thin' pack, a pack -which does not contain base objects; if those base objects are available -on client side. Client requests 'thin-pack' capability when it -understands how to "thicken" it by adding required delta bases making -it self-contained. - -Client MUST NOT request 'thin-pack' capability if it cannot turn a thin -pack into a self-contained pack. +A thin pack is one with deltas which reference base objects not +contained within the pack (but are known to exist at the receiving +end). This can reduce the network traffic significantly, but it +requires the receiving end to know how to "thicken" these packs by +adding the missing bases to the pack. + +The upload-pack server advertises 'thin-pack' when it can generate +and send a thin pack. A client requests the 'thin-pack' capability +when it understands how to "thicken" it, notifying the server that +it can receive such a pack. A client MUST NOT request the +'thin-pack' capability if it cannot turn a thin pack into a +self-contained pack. + +Receive-pack, on the other hand, is assumed by default to be able to +handle thin packs, but can ask the client not to use the feature by +advertising the 'no-thin' capability. A client MUST NOT send a thin +pack if the server advertises the 'no-thin' capability. + +The reasons for this asymmetry are historical. The receive-pack +program did not exist until after the invention of thin packs, so +historically the reference implementation of receive-pack always +understood thin packs. Adding 'no-thin' later allowed receive-pack +to disable the feature in a backwards-compatible manner. side-band, side-band-64k diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index cbb01a1..248dcab 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -1,5 +1,5 @@ Git User Manual -_______________ +=============== Git is a fast distributed revision control system. |