diff options
Diffstat (limited to 'Documentation')
254 files changed, 37240 insertions, 0 deletions
diff --git a/Documentation/.gitignore b/Documentation/.gitignore new file mode 100644 index 0000000..2f938f4 --- /dev/null +++ b/Documentation/.gitignore @@ -0,0 +1,8 @@ +*.xml +*.html +*.[1-8] +*.made +git.info +howto-index.txt +doc.dep +cmds-*.txt diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines new file mode 100644 index 0000000..3b042db --- /dev/null +++ b/Documentation/CodingGuidelines @@ -0,0 +1,112 @@ +Like other projects, we also have some guidelines to keep to the +code. For git in general, three rough rules are: + + - Most importantly, we never say "It's in POSIX; we'll happily + ignore your needs should your system not conform to it." + We live in the real world. + + - However, we often say "Let's stay away from that construct, + it's not even in POSIX". + + - In spite of the above two rules, we sometimes say "Although + this is not in POSIX, it (is so convenient | makes the code + much more readable | has other good characteristics) and + practically all the platforms we care about support it, so + let's use it". + + Again, we live in the real world, and it is sometimes a + judgement call, the decision based more on real world + constraints people face than what the paper standard says. + + +As for more concrete guidelines, just imitate the existing code +(this is a good guideline, no matter which project you are +contributing to). But if you must have a list of rules, +here they are. + +For shell scripts specifically (not exhaustive): + + - We prefer $( ... ) for command substitution; unlike ``, it + properly nests. It should have been the way Bourne spelled + it from day one, but unfortunately isn't. + + - We use ${parameter-word} and its [-=?+] siblings, and their + colon'ed "unset or null" form. + + - We use ${parameter#word} and its [#%] siblings, and their + doubled "longest matching" form. + + - We use Arithmetic Expansion $(( ... )). + + - No "Substring Expansion" ${parameter:offset:length}. + + - No shell arrays. + + - No strlen ${#parameter}. + + - No regexp ${parameter/pattern/string}. + + - We do not use Process Substitution <(list) or >(list). + + - We prefer "test" over "[ ... ]". + + - We do not write the noiseword "function" in front of shell + functions. + +For C programs: + + - We use tabs to indent, and interpret tabs as taking up to + 8 spaces. + + - We try to keep to at most 80 characters per line. + + - When declaring pointers, the star sides with the variable + name, i.e. "char *string", not "char* string" or + "char * string". This makes it easier to understand code + like "char *string, c;". + + - We avoid using braces unnecessarily. I.e. + + if (bla) { + x = 1; + } + + is frowned upon. A gray area is when the statement extends + over a few lines, and/or you have a lengthy comment atop of + it. Also, like in the Linux kernel, if there is a long list + of "else if" statements, it can make sense to add braces to + single line blocks. + + - Try to make your code understandable. You may put comments + in, but comments invariably tend to stale out when the code + they were describing changes. Often splitting a function + into two makes the intention of the code much clearer. + + - Double negation is often harder to understand than no negation + at all. + + - Some clever tricks, like using the !! operator with arithmetic + constructs, can be extremely confusing to others. Avoid them, + unless there is a compelling reason to use them. + + - Use the API. No, really. We have a strbuf (variable length + string), several arrays with the ALLOC_GROW() macro, a + path_list for sorted string lists, a hash map (mapping struct + objects) named "struct decorate", amongst other things. + + - When you come up with an API, document it. + + - The first #include in C files, except in platform specific + compat/ implementations, should be git-compat-util.h or another + header file that includes it, such as cache.h or builtin.h. + + - If you are planning a new command, consider writing it in shell + or perl first, so that changes in semantics can be easily + changed and discussed. Many git commands started out like + that, and a few are still scripts. + + - Avoid introducing a new dependency into git. This means you + usually should stay away from scripting languages not already + used in the git core command set (unless your command is clearly + separate from it, such as an importer to convert random-scm-X + repositories to git). diff --git a/Documentation/Makefile b/Documentation/Makefile new file mode 100644 index 0000000..43781fb --- /dev/null +++ b/Documentation/Makefile @@ -0,0 +1,232 @@ +MAN1_TXT= \ + $(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \ + $(wildcard git-*.txt)) \ + gitk.txt +MAN5_TXT=gitattributes.txt gitignore.txt gitcli.txt gitmodules.txt +MAN7_TXT=git.txt + +MAN_TXT = $(MAN1_TXT) $(MAN5_TXT) $(MAN7_TXT) +MAN_XML=$(patsubst %.txt,%.xml,$(MAN_TXT)) +MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT)) + +DOC_HTML=$(MAN_HTML) + +ARTICLES = tutorial +ARTICLES += tutorial-2 +ARTICLES += core-tutorial +ARTICLES += cvs-migration +ARTICLES += diffcore +ARTICLES += howto-index +ARTICLES += repository-layout +ARTICLES += hooks +ARTICLES += everyday +ARTICLES += git-tools +ARTICLES += glossary +# with their own formatting rules. +SP_ARTICLES = howto/revert-branch-rebase howto/using-merge-subtree user-manual +API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt))) +SP_ARTICLES += $(API_DOCS) +SP_ARTICLES += technical/api-index + +DOC_HTML += $(patsubst %,%.html,$(ARTICLES) $(SP_ARTICLES)) + +DOC_MAN1=$(patsubst %.txt,%.1,$(MAN1_TXT)) +DOC_MAN5=$(patsubst %.txt,%.5,$(MAN5_TXT)) +DOC_MAN7=$(patsubst %.txt,%.7,$(MAN7_TXT)) + +prefix?=$(HOME) +bindir?=$(prefix)/bin +htmldir?=$(prefix)/share/doc/git-doc +mandir?=$(prefix)/share/man +man1dir=$(mandir)/man1 +man5dir=$(mandir)/man5 +man7dir=$(mandir)/man7 +# DESTDIR= + +ASCIIDOC=asciidoc +ASCIIDOC_EXTRA = +MANPAGE_XSL = callouts.xsl +INSTALL?=install +RM ?= rm -f +DOC_REF = origin/man + +infodir?=$(prefix)/share/info +MAKEINFO=makeinfo +INSTALL_INFO=install-info +DOCBOOK2X_TEXI=docbook2x-texi +ifndef PERL_PATH + PERL_PATH = /usr/bin/perl +endif + +-include ../config.mak.autogen +-include ../config.mak + +ifdef ASCIIDOC8 +ASCIIDOC_EXTRA += -a asciidoc7compatible +endif +ifdef DOCBOOK_XSL_172 +ASCIIDOC_EXTRA += -a docbook-xsl-172 +MANPAGE_XSL = manpage-1.72.xsl +endif + +# +# Please note that there is a minor bug in asciidoc. +# The version after 6.0.3 _will_ include the patch found here: +# http://marc.theaimsgroup.com/?l=git&m=111558757202243&w=2 +# +# Until that version is released you may have to apply the patch +# yourself - yes, all 6 characters of it! +# + +all: html man + +html: $(DOC_HTML) + +$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7): asciidoc.conf + +man: man1 man5 man7 +man1: $(DOC_MAN1) +man5: $(DOC_MAN5) +man7: $(DOC_MAN7) + +info: git.info gitman.info + +install: man + $(INSTALL) -d -m 755 $(DESTDIR)$(man1dir) + $(INSTALL) -d -m 755 $(DESTDIR)$(man5dir) + $(INSTALL) -d -m 755 $(DESTDIR)$(man7dir) + $(INSTALL) -m 644 $(DOC_MAN1) $(DESTDIR)$(man1dir) + $(INSTALL) -m 644 $(DOC_MAN5) $(DESTDIR)$(man5dir) + $(INSTALL) -m 644 $(DOC_MAN7) $(DESTDIR)$(man7dir) + +install-info: info + $(INSTALL) -d -m 755 $(DESTDIR)$(infodir) + $(INSTALL) -m 644 git.info gitman.info $(DESTDIR)$(infodir) + if test -r $(DESTDIR)$(infodir)/dir; then \ + $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) git.info ;\ + $(INSTALL_INFO) --info-dir=$(DESTDIR)$(infodir) gitman.info ;\ + else \ + echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \ + fi + +install-html: html + sh ./install-webdoc.sh $(DESTDIR)$(htmldir) + +../GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE + $(MAKE) -C ../ GIT-VERSION-FILE + +-include ../GIT-VERSION-FILE + +# +# Determine "include::" file references in asciidoc files. +# +doc.dep : $(wildcard *.txt) build-docdep.perl + $(RM) $@+ $@ + $(PERL_PATH) ./build-docdep.perl >$@+ + mv $@+ $@ + +-include doc.dep + +cmds_txt = cmds-ancillaryinterrogators.txt \ + cmds-ancillarymanipulators.txt \ + cmds-mainporcelain.txt \ + cmds-plumbinginterrogators.txt \ + cmds-plumbingmanipulators.txt \ + cmds-synchingrepositories.txt \ + cmds-synchelpers.txt \ + cmds-purehelpers.txt \ + cmds-foreignscminterface.txt + +$(cmds_txt): cmd-list.made + +cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT) + $(RM) $@ + $(PERL_PATH) ./cmd-list.perl ../command-list.txt + date >$@ + +git.7 git.html: git.txt + +clean: + $(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7 + $(RM) *.texi *.texi+ git.info gitman.info + $(RM) howto-index.txt howto/*.html doc.dep + $(RM) technical/api-*.html technical/api-index.txt + $(RM) $(cmds_txt) *.made + +$(MAN_HTML): %.html : %.txt + $(RM) $@+ $@ + $(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \ + $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< + mv $@+ $@ + +%.1 %.5 %.7 : %.xml + $(RM) $@ + xmlto -m $(MANPAGE_XSL) man $< + +%.xml : %.txt + $(RM) $@+ $@ + $(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \ + $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< + mv $@+ $@ + +user-manual.xml: user-manual.txt user-manual.conf + $(ASCIIDOC) -b docbook -d book $< + +technical/api-index.txt: technical/api-index-skel.txt \ + technical/api-index.sh $(patsubst %,%.txt,$(API_DOCS)) + cd technical && sh ./api-index.sh + +$(patsubst %,%.html,$(API_DOCS) technical/api-index): %.html : %.txt + $(ASCIIDOC) -b xhtml11 -f asciidoc.conf \ + $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) $*.txt + +XSLT = docbook.xsl +XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css + +user-manual.html: user-manual.xml + xsltproc $(XSLTOPTS) -o $@ $(XSLT) $< + +git.info: user-manual.texi + $(MAKEINFO) --no-split -o $@ user-manual.texi + +user-manual.texi: user-manual.xml + $(RM) $@+ $@ + $(DOCBOOK2X_TEXI) user-manual.xml --to-stdout | $(PERL_PATH) fix-texi.perl >$@+ + mv $@+ $@ + +gitman.texi: $(MAN_XML) cat-texi.perl + $(RM) $@+ $@ + ($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --to-stdout $(xml);)) | \ + $(PERL_PATH) cat-texi.perl $@ >$@+ + mv $@+ $@ + +gitman.info: gitman.texi + $(MAKEINFO) --no-split $*.texi + +$(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml + $(RM) $@+ $@ + $(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ + mv $@+ $@ + +howto-index.txt: howto-index.sh $(wildcard howto/*.txt) + $(RM) $@+ $@ + sh ./howto-index.sh $(wildcard howto/*.txt) >$@+ + mv $@+ $@ + +$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt + $(ASCIIDOC) -b xhtml11 $*.txt + +WEBDOC_DEST = /pub/software/scm/git/docs + +$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt + $(RM) $@+ $@ + sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ + mv $@+ $@ + +install-webdoc : html + sh ./install-webdoc.sh $(WEBDOC_DEST) + +quick-install: + sh ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir) + +.PHONY: .FORCE-GIT-VERSION-FILE diff --git a/Documentation/RelNotes-1.5.0.1.txt b/Documentation/RelNotes-1.5.0.1.txt new file mode 100644 index 0000000..fea3f99 --- /dev/null +++ b/Documentation/RelNotes-1.5.0.1.txt @@ -0,0 +1,42 @@ +GIT v1.5.0.1 Release Notes +========================== + +Fixes since v1.5.0 +------------------ + +* Documentation updates + + - Clarifications and corrections to 1.5.0 release notes. + + - The main documentation did not link to git-remote documentation. + + - Clarified introductory text of git-rebase documentation. + + - Converted remaining mentions of update-index on Porcelain + documents to git-add/git-rm. + + - Some i18n.* configuration variables were incorrectly + described as core.*; fixed. + +* Bugfixes + + - git-add and git-update-index on a filesystem on which + executable bits are unreliable incorrectly reused st_mode + bits even when the path changed between symlink and regular + file. + + - git-daemon marks the listening sockets with FD_CLOEXEC so + that it won't be leaked into the children. + + - segfault from git-blame when the mandatory pathname + parameter was missing was fixed; usage() message is given + instead. + + - git-rev-list did not read $GIT_DIR/config file, which means + that did not honor i18n.logoutputencoding correctly. + +* Tweaks + + - sliding mmap() inefficiently mmaped the same region of a + packfile with an access pattern that used objects in the + reverse order. This has been made more efficient. diff --git a/Documentation/RelNotes-1.5.0.2.txt b/Documentation/RelNotes-1.5.0.2.txt new file mode 100644 index 0000000..b061e50 --- /dev/null +++ b/Documentation/RelNotes-1.5.0.2.txt @@ -0,0 +1,65 @@ +GIT v1.5.0.2 Release Notes +========================== + +Fixes since v1.5.0.1 +-------------------- + +* Bugfixes + + - Automated merge conflict handling when changes to symbolic + links conflicted were completely broken. The merge-resolve + strategy created a regular file with conflict markers in it + in place of the symbolic link. The default strategy, + merge-recursive was even more broken. It removed the path + that was pointed at by the symbolic link. Both of these + problems have been fixed. + + - 'git diff maint master next' did not correctly give combined + diff across three trees. + + - 'git fast-import' portability fix for Solaris. + + - 'git show-ref --verify' without arguments did not error out + but segfaulted. + + - 'git diff :tracked-file `pwd`/an-untracked-file' gave an extra + slashes after a/ and b/. + + - 'git format-patch' produced too long filenames if the commit + message had too long line at the beginning. + + - Running 'make all' and then without changing anything + running 'make install' still rebuilt some files. This + was inconvenient when building as yourself and then + installing as root (especially problematic when the source + directory is on NFS and root is mapped to nobody). + + - 'git-rerere' failed to deal with two unconflicted paths that + sorted next to each other. + + - 'git-rerere' attempted to open(2) a symlink and failed if + there was a conflict. Since a conflicting change to a + symlink would not benefit from rerere anyway, the command + now ignores conflicting changes to symlinks. + + - 'git-repack' did not like to pass more than 64 arguments + internally to underlying 'rev-list' logic, which made it + impossible to repack after accumulating many (small) packs + in the repository. + + - 'git-diff' to review the combined diff during a conflicted + merge were not reading the working tree version correctly + when changes to a symbolic link conflicted. It should have + read the data using readlink(2) but read from the regular + file the symbolic link pointed at. + + - 'git-remote' did not like period in a remote's name. + +* Documentation updates + + - added and clarified core.bare, core.legacyheaders configurations. + + - updated "git-clone --depth" documentation. + + +* Assorted git-gui fixes. diff --git a/Documentation/RelNotes-1.5.0.3.txt b/Documentation/RelNotes-1.5.0.3.txt new file mode 100644 index 0000000..cd500f9 --- /dev/null +++ b/Documentation/RelNotes-1.5.0.3.txt @@ -0,0 +1,58 @@ +GIT v1.5.0.3 Release Notes +========================== + +Fixes since v1.5.0.2 +-------------------- + +* Bugfixes + + - 'git.el' honors the commit coding system from the configuration. + + - 'blameview' in contrib/ correctly digs deeper when a line is + clicked. + + - 'http-push' correctly makes sure the remote side has leading + path. Earlier it started in the middle of the path, and + incorrectly. + + - 'git-merge' did not exit with non-zero status when the + working tree was dirty and cannot fast forward. It does + now. + + - 'cvsexportcommit' does not lose yet-to-be-used message file. + + - int-vs-size_t typefix when running combined diff on files + over 2GB long. + + - 'git apply --whitespace=strip' should not touch unmodified + lines. + + - 'git-mailinfo' choke when a logical header line was too long. + + - 'git show A..B' did not error out. Negative ref ("not A" in + this example) does not make sense for the purpose of the + command, so now it errors out. + + - 'git fmt-merge-msg --file' without file parameter did not + correctly error out. + + - 'git archimport' barfed upon encountering a commit without + summary. + + - 'git index-pack' did not protect itself from getting a short + read out of pread(2). + + - 'git http-push' had a few buffer overruns. + + - Build dependency fixes to rebuild fetch.o when other headers + change. + +* Documentation updates + + - user-manual updates. + + - Options to 'git remote add' were described insufficiently. + + - Configuration format.suffix was not documented. + + - Other formatting and spelling fixes. diff --git a/Documentation/RelNotes-1.5.0.4.txt b/Documentation/RelNotes-1.5.0.4.txt new file mode 100644 index 0000000..feefa5d --- /dev/null +++ b/Documentation/RelNotes-1.5.0.4.txt @@ -0,0 +1,22 @@ +GIT v1.5.0.4 Release Notes +========================== + +Fixes since v1.5.0.3 +-------------------- + +* Bugfixes + + - git.el does not add duplicate sign-off lines. + + - git-commit shows the full stat of the resulting commit, not + just about the files in the current directory, when run from + a subdirectory. + + - "git-checkout -m '@{8 hours ago}'" had a funny failure from + eval; fixed. + + - git-gui updates. + +* Documentation updates + +* User manual updates diff --git a/Documentation/RelNotes-1.5.0.5.txt b/Documentation/RelNotes-1.5.0.5.txt new file mode 100644 index 0000000..eeec3d7 --- /dev/null +++ b/Documentation/RelNotes-1.5.0.5.txt @@ -0,0 +1,26 @@ +GIT v1.5.0.5 Release Notes +========================== + +Fixes since v1.5.0.3 +-------------------- + +* Bugfixes + + - git-merge (hence git-pull) did not refuse fast-forwarding + when the working tree had local changes that would have + conflicted with it. + + - git.el does not add duplicate sign-off lines. + + - git-commit shows the full stat of the resulting commit, not + just about the files in the current directory, when run from + a subdirectory. + + - "git-checkout -m '@{8 hours ago}'" had a funny failure from + eval; fixed. + + - git-gui updates. + +* Documentation updates + +* User manual updates diff --git a/Documentation/RelNotes-1.5.0.6.txt b/Documentation/RelNotes-1.5.0.6.txt new file mode 100644 index 0000000..c02015a --- /dev/null +++ b/Documentation/RelNotes-1.5.0.6.txt @@ -0,0 +1,21 @@ +GIT v1.5.0.6 Release Notes +========================== + +Fixes since v1.5.0.5 +-------------------- + +* Bugfixes + + - a handful small fixes to gitweb. + + - build procedure for user-manual is fixed not to require locally + installed stylesheets. + + - "git commit $paths" on paths whose earlier contents were + already updated in the index were failing out. + +* Documentation + + - user-manual has better cross references. + + - gitweb installation/deployment procedure is now documented. diff --git a/Documentation/RelNotes-1.5.0.7.txt b/Documentation/RelNotes-1.5.0.7.txt new file mode 100644 index 0000000..670ad32 --- /dev/null +++ b/Documentation/RelNotes-1.5.0.7.txt @@ -0,0 +1,18 @@ +GIT v1.5.0.7 Release Notes +========================== + +Fixes since v1.5.0.6 +-------------------- + +* Bugfixes + + - git-upload-pack failed to close unused pipe ends, resulting + in many zombies to hang around. + + - git-rerere was recording the contents of earlier hunks + duplicated in later hunks. This prevented resolving the same + conflict when performing the same merge the other way around. + +* Documentation + + - a few documentation fixes from Debian package maintainer. diff --git a/Documentation/RelNotes-1.5.0.txt b/Documentation/RelNotes-1.5.0.txt new file mode 100644 index 0000000..daf4bdb --- /dev/null +++ b/Documentation/RelNotes-1.5.0.txt @@ -0,0 +1,469 @@ +GIT v1.5.0 Release Notes +======================== + +Old news +-------- + +This section is for people who are upgrading from ancient +versions of git. Although all of the changes in this section +happened before the current v1.4.4 release, they are summarized +here in the v1.5.0 release notes for people who skipped earlier +versions. + +As of git v1.5.0 there are some optional features that changes +the repository to allow data to be stored and transferred more +efficiently. These features are not enabled by default, as they +will make the repository unusable with older versions of git. +Specifically, the available options are: + + - There is a configuration variable core.legacyheaders that + changes the format of loose objects so that they are more + efficient to pack and to send out of the repository over git + native protocol, since v1.4.2. However, loose objects + written in the new format cannot be read by git older than + that version; people fetching from your repository using + older clients over dumb transports (e.g. http) using older + versions of git will also be affected. + + To let git use the new loose object format, you have to + set core.legacyheaders to false. + + - Since v1.4.3, configuration repack.usedeltabaseoffset allows + packfile to be created in more space efficient format, which + cannot be read by git older than that version. + + To let git use the new format for packfiles, you have to + set repack.usedeltabaseoffset to true. + +The above two new features are not enabled by default and you +have to explicitly ask for them, because they make repositories +unreadable by older versions of git, and in v1.5.0 we still do +not enable them by default for the same reason. We will change +this default probably 1 year after 1.4.2's release, when it is +reasonable to expect everybody to have new enough version of +git. + + - 'git pack-refs' appeared in v1.4.4; this command allows tags + to be accessed much more efficiently than the traditional + 'one-file-per-tag' format. Older git-native clients can + still fetch from a repository that packed and pruned refs + (the server side needs to run the up-to-date version of git), + but older dumb transports cannot. Packing of refs is done by + an explicit user action, either by use of "git pack-refs + --prune" command or by use of "git gc" command. + + - 'git -p' to paginate anything -- many commands do pagination + by default on a tty. Introduced between v1.4.1 and v1.4.2; + this may surprise old timers. + + - 'git archive' superseded 'git tar-tree' in v1.4.3; + + - 'git cvsserver' was new invention in v1.3.0; + + - 'git repo-config', 'git grep', 'git rebase' and 'gitk' were + seriously enhanced during v1.4.0 timeperiod. + + - 'gitweb' became part of git.git during v1.4.0 timeperiod and + seriously modified since then. + + - reflog is an v1.4.0 invention. This allows you to name a + revision that a branch used to be at (e.g. "git diff + master@{yesterday} master" allows you to see changes since + yesterday's tip of the branch). + + +Updates in v1.5.0 since v1.4.4 series +------------------------------------- + +* Index manipulation + + - git-add is to add contents to the index (aka "staging area" + for the next commit), whether the file the contents happen to + be is an existing one or a newly created one. + + - git-add without any argument does not add everything + anymore. Use 'git-add .' instead. Also you can add + otherwise ignored files with an -f option. + + - git-add tries to be more friendly to users by offering an + interactive mode ("git-add -i"). + + - git-commit <path> used to refuse to commit if <path> was + different between HEAD and the index (i.e. update-index was + used on it earlier). This check was removed. + + - git-rm is much saner and safer. It is used to remove paths + from both the index file and the working tree, and makes sure + you are not losing any local modification before doing so. + + - git-reset <tree> <paths>... can be used to revert index + entries for selected paths. + + - git-update-index is much less visible. Many suggestions to + use the command in git output and documentation have now been + replaced by simpler commands such as "git add" or "git rm". + + +* Repository layout and objects transfer + + - The data for origin repository is stored in the configuration + file $GIT_DIR/config, not in $GIT_DIR/remotes/, for newly + created clones. The latter is still supported and there is + no need to convert your existing repository if you are + already comfortable with your workflow with the layout. + + - git-clone always uses what is known as "separate remote" + layout for a newly created repository with a working tree. + + A repository with the separate remote layout starts with only + one default branch, 'master', to be used for your own + development. Unlike the traditional layout that copied all + the upstream branches into your branch namespace (while + renaming their 'master' to your 'origin'), the new layout + puts upstream branches into local "remote-tracking branches" + with their own namespace. These can be referenced with names + such as "origin/$upstream_branch_name" and are stored in + .git/refs/remotes rather than .git/refs/heads where normal + branches are stored. + + This layout keeps your own branch namespace less cluttered, + avoids name collision with your upstream, makes it possible + to automatically track new branches created at the remote + after you clone from it, and makes it easier to interact with + more than one remote repository (you can use "git remote" to + add other repositories to track). There might be some + surprises: + + * 'git branch' does not show the remote tracking branches. + It only lists your own branches. Use '-r' option to view + the tracking branches. + + * If you are forking off of a branch obtained from the + upstream, you would have done something like 'git branch + my-next next', because traditional layout dropped the + tracking branch 'next' into your own branch namespace. + With the separate remote layout, you say 'git branch next + origin/next', which allows you to use the matching name + 'next' for your own branch. It also allows you to track a + remote other than 'origin' (i.e. where you initially cloned + from) and fork off of a branch from there the same way + (e.g. "git branch mingw j6t/master"). + + Repositories initialized with the traditional layout continue + to work. + + - New branches that appear on the origin side after a clone is + made are also tracked automatically. This is done with an + wildcard refspec "refs/heads/*:refs/remotes/origin/*", which + older git does not understand, so if you clone with 1.5.0, + you would need to downgrade remote.*.fetch in the + configuration file to specify each branch you are interested + in individually if you plan to fetch into the repository with + older versions of git (but why would you?). + + - Similarly, wildcard refspec "refs/heads/*:refs/remotes/me/*" + can be given to "git-push" command to update the tracking + branches that is used to track the repository you are pushing + from on the remote side. + + - git-branch and git-show-branch know remote tracking branches + (use the command line switch "-r" to list only tracked branches). + + - git-push can now be used to delete a remote branch or a tag. + This requires the updated git on the remote side (use "git + push <remote> :refs/heads/<branch>" to delete "branch"). + + - git-push more aggressively keeps the transferred objects + packed. Earlier we recommended to monitor amount of loose + objects and repack regularly, but you should repack when you + accumulated too many small packs this way as well. Updated + git-count-objects helps you with this. + + - git-fetch also more aggressively keeps the transferred objects + packed. This behavior of git-push and git-fetch can be + tweaked with a single configuration transfer.unpacklimit (but + usually there should not be any need for a user to tweak it). + + - A new command, git-remote, can help you manage your remote + tracking branch definitions. + + - You may need to specify explicit paths for upload-pack and/or + receive-pack due to your ssh daemon configuration on the + other end. This can now be done via remote.*.uploadpack and + remote.*.receivepack configuration. + + +* Bare repositories + + - Certain commands change their behavior in a bare repository + (i.e. a repository without associated working tree). We use + a fairly conservative heuristic (if $GIT_DIR is ".git", or + ends with "/.git", the repository is not bare) to decide if a + repository is bare, but "core.bare" configuration variable + can be used to override the heuristic when it misidentifies + your repository. + + - git-fetch used to complain updating the current branch but + this is now allowed for a bare repository. So is the use of + 'git-branch -f' to update the current branch. + + - Porcelain-ish commands that require a working tree refuses to + work in a bare repository. + + +* Reflog + + - Reflog records the history from the view point of the local + repository. In other words, regardless of the real history, + the reflog shows the history as seen by one particular + repository (this enables you to ask "what was the current + revision in _this_ repository, yesterday at 1pm?"). This + facility is enabled by default for repositories with working + trees, and can be accessed with the "branch@{time}" and + "branch@{Nth}" notation. + + - "git show-branch" learned showing the reflog data with the + new -g option. "git log" has -g option to view reflog + entries in a more verbose manner. + + - git-branch knows how to rename branches and moves existing + reflog data from the old branch to the new one. + + - In addition to the reflog support in v1.4.4 series, HEAD + reference maintains its own log. "HEAD@{5.minutes.ago}" + means the commit you were at 5 minutes ago, which takes + branch switching into account. If you want to know where the + tip of your current branch was at 5 minutes ago, you need to + explicitly say its name (e.g. "master@{5.minutes.ago}") or + omit the refname altogether i.e. "@{5.minutes.ago}". + + - The commits referred to by reflog entries are now protected + against pruning. The new command "git reflog expire" can be + used to truncate older reflog entries and entries that refer + to commits that have been pruned away previously with older + versions of git. + + Existing repositories that have been using reflog may get + complaints from fsck-objects and may not be able to run + git-repack, if you had run git-prune from older git; please + run "git reflog expire --stale-fix --all" first to remove + reflog entries that refer to commits that are no longer in + the repository when that happens. + + +* Crufts removal + + - We used to say "old commits are retrievable using reflog and + 'master@{yesterday}' syntax as long as you haven't run + git-prune". We no longer have to say the latter half of the + above sentence, as git-prune does not remove things reachable + from reflog entries. + + - There is a toplevel garbage collector script, 'git-gc', that + runs periodic cleanup functions, including 'git-repack -a -d', + 'git-reflog expire', 'git-pack-refs --prune', and 'git-rerere + gc'. + + - The output from fsck ("fsck-objects" is called just "fsck" + now, but the old name continues to work) was needlessly + alarming in that it warned missing objects that are reachable + only from dangling objects. This has been corrected and the + output is much more useful. + + +* Detached HEAD + + - You can use 'git-checkout' to check out an arbitrary revision + or a tag as well, instead of named branches. This will + dissociate your HEAD from the branch you are currently on. + + A typical use of this feature is to "look around". E.g. + + $ git checkout v2.6.16 + ... compile, test, etc. + $ git checkout v2.6.17 + ... compile, test, etc. + + - After detaching your HEAD, you can go back to an existing + branch with usual "git checkout $branch". Also you can + start a new branch using "git checkout -b $newbranch" to + start a new branch at that commit. + + - You can even pull from other repositories, make merges and + commits while your HEAD is detached. Also you can use "git + reset" to jump to arbitrary commit, while still keeping your + HEAD detached. + + Remember that a detached state is volatile, i.e. it will be forgotten + as soon as you move away from it with the checkout or reset command, + unless a branch is created from it as mentioned above. It is also + possible to rescue a lost detached state from the HEAD reflog. + + +* Packed refs + + - Repositories with hundreds of tags have been paying large + overhead, both in storage and in runtime, due to the + traditional one-ref-per-file format. A new command, + git-pack-refs, can be used to "pack" them in more efficient + representation (you can let git-gc do this for you). + + - Clones and fetches over dumb transports are now aware of + packed refs and can download from repositories that use + them. + + +* Configuration + + - configuration related to color setting are consolidated under + color.* namespace (older diff.color.*, status.color.* are + still supported). + + - 'git-repo-config' command is accessible as 'git-config' now. + + +* Updated features + + - git-describe uses better criteria to pick a base ref. It + used to pick the one with the newest timestamp, but now it + picks the one that is topologically the closest (that is, + among ancestors of commit C, the ref T that has the shortest + output from "git-rev-list T..C" is chosen). + + - git-describe gives the number of commits since the base ref + between the refname and the hash suffix. E.g. the commit one + before v2.6.20-rc6 in the kernel repository is: + + v2.6.20-rc5-306-ga21b069 + + which tells you that its object name begins with a21b069, + v2.6.20-rc5 is an ancestor of it (meaning, the commit + contains everything -rc5 has), and there are 306 commits + since v2.6.20-rc5. + + - git-describe with --abbrev=0 can be used to show only the + name of the base ref. + + - git-blame learned a new option, --incremental, that tells it + to output the blames as they are assigned. A sample script + to use it is also included as contrib/blameview. + + - git-blame starts annotating from the working tree by default. + + +* Less external dependency + + - We no longer require the "merge" program from the RCS suite. + All 3-way file-level merges are now done internally. + + - The original implementation of git-merge-recursive which was + in Python has been removed; we have a C implementation of it + now. + + - git-shortlog is no longer a Perl script. It no longer + requires output piped from git-log; it can accept revision + parameters directly on the command line. + + +* I18n + + - We have always encouraged the commit message to be encoded in + UTF-8, but the users are allowed to use legacy encoding as + appropriate for their projects. This will continue to be the + case. However, a non UTF-8 commit encoding _must_ be + explicitly set with i18n.commitencoding in the repository + where a commit is made; otherwise git-commit-tree will + complain if the log message does not look like a valid UTF-8 + string. + + - The value of i18n.commitencoding in the originating + repository is recorded in the commit object on the "encoding" + header, if it is not UTF-8. git-log and friends notice this, + and reencodes the message to the log output encoding when + displaying, if they are different. The log output encoding + is determined by "git log --encoding=<encoding>", + i18n.logoutputencoding configuration, or i18n.commitencoding + configuration, in the decreasing order of preference, and + defaults to UTF-8. + + - Tools for e-mailed patch application now default to -u + behavior; i.e. it always re-codes from the e-mailed encoding + to the encoding specified with i18n.commitencoding. This + unfortunately forces projects that have happily been using a + legacy encoding without setting i18n.commitencoding to set + the configuration, but taken with other improvement, please + excuse us for this very minor one-time inconvenience. + + +* e-mailed patches + + - See the above I18n section. + + - git-format-patch now enables --binary without being asked. + git-am does _not_ default to it, as sending binary patch via + e-mail is unusual and is harder to review than textual + patches and it is prudent to require the person who is + applying the patch to explicitly ask for it. + + - The default suffix for git-format-patch output is now ".patch", + not ".txt". This can be changed with --suffix=.txt option, + or setting the config variable "format.suffix" to ".txt". + + +* Foreign SCM interfaces + + - git-svn now requires the Perl SVN:: libraries, the + command-line backend was too slow and limited. + + - the 'commit' subcommand of git-svn has been renamed to + 'set-tree', and 'dcommit' is the recommended replacement for + day-to-day work. + + - git fast-import backend. + + +* User support + + - Quite a lot of documentation updates. + + - Bash completion scripts have been updated heavily. + + - Better error messages for often used Porcelainish commands. + + - Git GUI. This is a simple Tk based graphical interface for + common Git operations. + + +* Sliding mmap + + - We used to assume that we can mmap the whole packfile while + in use, but with a large project this consumes huge virtual + memory space and truly huge ones would not fit in the + userland address space on 32-bit platforms. We now mmap huge + packfile in pieces to avoid this problem. + + +* Shallow clones + + - There is a partial support for 'shallow' repositories that + keeps only recent history. A 'shallow clone' is created by + specifying how deep that truncated history should be + (e.g. "git clone --depth 5 git://some.where/repo.git"). + + Currently a shallow repository has number of limitations: + + - Cloning and fetching _from_ a shallow clone are not + supported (nor tested -- so they might work by accident but + they are not expected to). + + - Pushing from nor into a shallow clone are not expected to + work. + + - Merging inside a shallow repository would work as long as a + merge base is found in the recent history, but otherwise it + will be like merging unrelated histories and may result in + huge conflicts. + + but this would be more than adequate for people who want to + look at near the tip of a big project with a deep history and + send patches in e-mail format. diff --git a/Documentation/RelNotes-1.5.1.1.txt b/Documentation/RelNotes-1.5.1.1.txt new file mode 100644 index 0000000..9147121 --- /dev/null +++ b/Documentation/RelNotes-1.5.1.1.txt @@ -0,0 +1,65 @@ +GIT v1.5.1.1 Release Notes +========================== + +Fixes since v1.5.1 +------------------ + +* Documentation updates + + - The --left-right option of rev-list and friends is documented. + + - The documentation for cvsimport has been majorly improved. + + - "git-show-ref --exclude-existing" was documented. + +* Bugfixes + + - The implementation of -p option in "git cvsexportcommit" had + the meaning of -C (context reduction) option wrong, and + loosened the context requirements when it was told to be + strict. + + - "git cvsserver" did not behave like the real cvsserver when + client side removed a file from the working tree without + doing anything else on the path. In such a case, it should + restore it from the checked out revision. + + - "git fsck" issued an alarming error message on detached + HEAD. It is not an error since at least 1.5.0. + + - "git send-email" produced of References header of unbounded length; + fixed this with line-folding. + + - "git archive" to download from remote site should not + require you to be in a git repository, but it incorrectly + did. + + - "git apply" ignored -p<n> for "diff --git" formatted + patches. + + - "git rerere" recorded a conflict that had one side empty + (the other side adds) incorrectly; this made merging in the + other direction fail to use previously recorded resolution. + + - t4200 test was broken where "wc -l" pads its output with + spaces. + + - "git branch -m old new" to rename branch did not work + without a configuration file in ".git/config". + + - The sample hook for notification e-mail was misnamed. + + - gitweb did not show type-changing patch correctly in the + blobdiff view. + + - git-svn did not error out with incorrect command line options. + + - git-svn fell into an infinite loop when insanely long commit + message was found. + + - git-svn dcommit and rebase was confused by patches that were + merged from another branch that is managed by git-svn. + + - git-svn used to get confused when globbing remote branch/tag + spec (e.g. "branches = proj/branches/*:refs/remotes/origin/*") + is used and there was a plain file that matched the glob. diff --git a/Documentation/RelNotes-1.5.1.2.txt b/Documentation/RelNotes-1.5.1.2.txt new file mode 100644 index 0000000..d884563 --- /dev/null +++ b/Documentation/RelNotes-1.5.1.2.txt @@ -0,0 +1,50 @@ +GIT v1.5.1.2 Release Notes +========================== + +Fixes since v1.5.1.1 +-------------------- + +* Bugfixes + + - "git clone" over http from a repository that has lost the + loose refs by running "git pack-refs" were broken (a code to + deal with this was added to "git fetch" in v1.5.0, but it + was missing from "git clone"). + + - "git diff a/ b/" incorrectly fell in "diff between two + filesystem objects" codepath, when the user most likely + wanted to limit the extent of output to two tracked + directories. + + - git-quiltimport had the same bug as we fixed for + git-applymbox in v1.5.1.1 -- it gave an alarming "did not + have any patch" message (but did not actually fail and was + harmless). + + - various git-svn fixes. + + - Sample update hook incorrectly always refused requests to + delete branches through push. + + - git-blame on a very long working tree path had buffer + overrun problem. + + - git-apply did not like to be fed two patches in a row that created + and then modified the same file. + + - git-svn was confused when a non-project was stored directly under + trunk/, branches/ and tags/. + + - git-svn wants the Error.pm module that was at least as new + as what we ship as part of git; install ours in our private + installation location if the one on the system is older. + + - An earlier update to command line integer parameter parser was + botched and made 'update-index --cacheinfo' completely useless. + + +* Documentation updates + + - Various documentation updates from J. Bruce Fields, Frank + Lichtenheld, Alex Riesen and others. Andrew Ruder started a + war on undocumented options. diff --git a/Documentation/RelNotes-1.5.1.3.txt b/Documentation/RelNotes-1.5.1.3.txt new file mode 100644 index 0000000..876408b --- /dev/null +++ b/Documentation/RelNotes-1.5.1.3.txt @@ -0,0 +1,45 @@ +GIT v1.5.1.3 Release Notes +========================== + +Fixes since v1.5.1.2 +-------------------- + +* Bugfixes + + - git-add tried to optimize by finding common leading + directories across its arguments but botched, causing very + confused behaviour. + + - unofficial rpm.spec file shipped with git was letting + ETC_GITCONFIG set to /usr/etc/gitconfig. Tweak the official + Makefile to make it harder for distro people to make the + same mistake, by setting the variable to /etc/gitconfig if + prefix is set to /usr. + + - git-svn inconsistently stripped away username from the URL + only when svnsync_props was in use. + + - git-svn got confused when handling symlinks on Mac OS. + + - git-send-email was not quoting recipient names that have + period '.' in them. Also it did not allow overriding + envelope sender, which made it impossible to send patches to + certain subscriber-only lists. + + - built-in write_tree() routine had a sequence that renamed a + file that is still open, which some systems did not like. + + - when memory is very tight, sliding mmap code to read + packfiles incorrectly closed the fd that was still being + used to read the pack. + + - import-tars contributed front-end for fastimport was passing + wrong directory modes without checking. + + - git-fastimport trusted its input too much and allowed to + create corrupt tree objects with entries without a name. + + - git-fetch needlessly barfed when too long reflog action + description was given by the caller. + +Also contains various documentation updates. diff --git a/Documentation/RelNotes-1.5.1.4.txt b/Documentation/RelNotes-1.5.1.4.txt new file mode 100644 index 0000000..df2f66c --- /dev/null +++ b/Documentation/RelNotes-1.5.1.4.txt @@ -0,0 +1,30 @@ +GIT v1.5.1.4 Release Notes +========================== + +Fixes since v1.5.1.3 +-------------------- + +* Bugfixes + + - "git-http-fetch" did not work around a bug in libcurl + earlier than 7.16 (curl_multi_remove_handle() was broken). + + - "git cvsserver" handles a file that was once removed and + then added again correctly. + + - import-tars script (in contrib/) handles GNU tar archives + that contain pathnames longer than 100 bytes (long-link + extension) correctly. + + - xdelta test program did not build correctly. + + - gitweb sometimes tried incorrectly to apply function to + decode utf8 twice, resulting in corrupt output. + + - "git blame -C" mishandled text at the end of a group of + lines. + + - "git log/rev-list --boundary" did not produce output + correctly without --left-right option. + + - Many documentation updates. diff --git a/Documentation/RelNotes-1.5.1.5.txt b/Documentation/RelNotes-1.5.1.5.txt new file mode 100644 index 0000000..b0ab8eb --- /dev/null +++ b/Documentation/RelNotes-1.5.1.5.txt @@ -0,0 +1,42 @@ +GIT v1.5.1.5 Release Notes +========================== + +Fixes since v1.5.1.4 +-------------------- + +* Bugfixes + + - git-send-email did not understand aliases file for mutt, which + allows leading whitespaces. + + - git-format-patch emitted Content-Type and Content-Transfer-Encoding + headers for non ASCII contents, but failed to add MIME-Version. + + - git-name-rev had a buffer overrun with a deep history. + + - contributed script import-tars did not get the directory in + tar archives interpreted correctly. + + - git-svn was reported to segfault for many people on list and + #git; hopefully this has been fixed. + + - "git-svn clone" does not try to minimize the URL + (i.e. connect to higher level hierarchy) by default, as this + can prevent clone to fail if only part of the repository + (e.g. 'trunk') is open to public. + + - "git checkout branch^0" did not detach the head when you are + already on 'branch'; backported the fix from the 'master'. + + - "git-config section.var" did not correctly work when + existing configuration file had both [section] and [section "name"] + next to each other. + + - "git clone ../other-directory" was fooled if the current + directory $PWD points at is a symbolic link. + + - (build) tree_entry_extract() function was both static inline + and extern, which caused trouble compiling with Forte12 + compilers on Sun. + + - Many many documentation fixes and updates. diff --git a/Documentation/RelNotes-1.5.1.6.txt b/Documentation/RelNotes-1.5.1.6.txt new file mode 100644 index 0000000..55f3ac1 --- /dev/null +++ b/Documentation/RelNotes-1.5.1.6.txt @@ -0,0 +1,45 @@ +GIT v1.5.1.6 Release Notes +========================== + +Fixes since v1.5.1.4 +-------------------- + +* Bugfixes + + - git-send-email did not understand aliases file for mutt, which + allows leading whitespaces. + + - git-format-patch emitted Content-Type and Content-Transfer-Encoding + headers for non ASCII contents, but failed to add MIME-Version. + + - git-name-rev had a buffer overrun with a deep history. + + - contributed script import-tars did not get the directory in + tar archives interpreted correctly. + + - git-svn was reported to segfault for many people on list and + #git; hopefully this has been fixed. + + - git-svn also had a bug to crash svnserve by sending a bad + sequence of requests. + + - "git-svn clone" does not try to minimize the URL + (i.e. connect to higher level hierarchy) by default, as this + can prevent clone to fail if only part of the repository + (e.g. 'trunk') is open to public. + + - "git checkout branch^0" did not detach the head when you are + already on 'branch'; backported the fix from the 'master'. + + - "git-config section.var" did not correctly work when + existing configuration file had both [section] and [section "name"] + next to each other. + + - "git clone ../other-directory" was fooled if the current + directory $PWD points at is a symbolic link. + + - (build) tree_entry_extract() function was both static inline + and extern, which caused trouble compiling with Forte12 + compilers on Sun. + + - Many many documentation fixes and updates. diff --git a/Documentation/RelNotes-1.5.1.txt b/Documentation/RelNotes-1.5.1.txt new file mode 100644 index 0000000..daed367 --- /dev/null +++ b/Documentation/RelNotes-1.5.1.txt @@ -0,0 +1,371 @@ +GIT v1.5.1 Release Notes +======================== + +Updates since v1.5.0 +-------------------- + +* Deprecated commands and options. + + - git-diff-stages and git-resolve have been removed. + +* New commands and options. + + - "git log" and friends take --reverse, which instructs them + to give their output in the order opposite from their usual. + They typically output from new to old, but with this option + their output would read from old to new. "git shortlog" + usually lists older commits first, but with this option, + they are shown from new to old. + + - "git log --pretty=format:<string>" to allow more flexible + custom log output. + + - "git diff" learned --ignore-space-at-eol. This is a weaker + form of --ignore-space-change. + + - "git diff --no-index pathA pathB" can be used as diff + replacement with git specific enhancements. + + - "git diff --no-index" can read from '-' (standard input). + + - "git diff" also learned --exit-code to exit with non-zero + status when it found differences. In the future we might + want to make this the default but that would be a rather big + backward incompatible change; it will stay as an option for + now. + + - "git diff --quiet" is --exit-code with output turned off, + meant for scripted use to quickly determine if there is any + tree-level difference. + + - Textual patch generation with "git diff" without -w/-b + option has been significantly optimized. "git blame" got + faster because of the same change. + + - "git log" and "git rev-list" has been optimized + significantly when they are used with pathspecs. + + - "git branch --track" can be used to set up configuration + variables to help it easier to base your work on branches + you track from a remote site. + + - "git format-patch --attach" now emits attachments. Use + --inline to get an inlined multipart/mixed. + + - "git name-rev" learned --refs=<pattern>, to limit the tags + used for naming the given revisions only to the ones + matching the given pattern. + + - "git remote update" is to run "git fetch" for defined remotes + to update tracking branches. + + - "git cvsimport" can now take '-d' to talk with a CVS + repository different from what are recorded in CVS/Root + (overriding it with environment CVSROOT does not work). + + - "git bundle" can help sneaker-netting your changes between + repositories. + + - "git mergetool" can help 3-way file-level conflict + resolution with your favorite graphical merge tools. + + - A new configuration "core.symlinks" can be used to disable + symlinks on filesystems that do not support them; they are + checked out as regular files instead. + + - You can name a commit object with its first line of the + message. The syntax to use is ':/message text'. E.g. + + $ git show ":/object name: introduce ':/<oneline prefix>' notation" + + means the same thing as: + + $ git show 28a4d940443806412effa246ecc7768a21553ec7 + + - "git bisect" learned a new command "run" that takes a script + to run after each revision is checked out to determine if it + is good or bad, to automate the bisection process. + + - "git log" family learned a new traversal option --first-parent, + which does what the name suggests. + + +* Updated behavior of existing commands. + + - "git-merge-recursive" used to barf when there are more than + one common ancestors for the merge, and merging them had a + rename/rename conflict. This has been fixed. + + - "git fsck" does not barf on corrupt loose objects. + + - "git rm" does not remove newly added files without -f. + + - "git archimport" allows remapping when coming up with git + branch names from arch names. + + - git-svn got almost a rewrite. + + - core.autocrlf configuration, when set to 'true', makes git + to convert CRLF at the end of lines in text files to LF when + reading from the filesystem, and convert in reverse when + writing to the filesystem. The variable can be set to + 'input', in which case the conversion happens only while + reading from the filesystem but files are written out with + LF at the end of lines. Currently, which paths to consider + 'text' (i.e. be subjected to the autocrlf mechanism) is + decided purely based on the contents, but the plan is to + allow users to explicitly override this heuristic based on + paths. + + - The behavior of 'git-apply', when run in a subdirectory, + without --index nor --cached were inconsistent with that of + the command with these options. This was fixed to match the + behavior with --index. A patch that is meant to be applied + with -p1 from the toplevel of the project tree can be + applied with any custom -p<n> option. A patch that is not + relative to the toplevel needs to be applied with -p<n> + option with or without --index (or --cached). + + - "git diff" outputs a trailing HT when pathnames have embedded + SP on +++/--- header lines, in order to help "GNU patch" to + parse its output. "git apply" was already updated to accept + this modified output format since ce74618d (Sep 22, 2006). + + - "git cvsserver" runs hooks/update and honors its exit status. + + - "git cvsserver" can be told to send everything with -kb. + + - "git diff --check" also honors the --color output option. + + - "git name-rev" used to stress the fact that a ref is a tag too + much, by saying something like "v1.2.3^0~22". It now says + "v1.2.3~22" in such a case (it still says "v1.2.3^0" if it does + not talk about an ancestor of the commit that is tagged, which + makes sense). + + - "git rev-list --boundary" now shows boundary markers for the + commits omitted by --max-age and --max-count condition. + + - The configuration mechanism now reads $(prefix)/etc/gitconfig. + + - "git apply --verbose" shows what preimage lines were wanted + when it couldn't find them. + + - "git status" in a read-only repository got a bit saner. + + - "git fetch" (hence "git clone" and "git pull") are less + noisy when the output does not go to tty. + + - "git fetch" between repositories with many refs were slow + even when there are not many changes that needed + transferring. This has been sped up by partially rewriting + the heaviest parts in C. + + - "git mailinfo" which splits an e-mail into a patch and the + meta-information was rewritten, thanks to Don Zickus. It + handles nested multipart better. The command was broken for + a brief period on 'master' branch since 1.5.0 but the + breakage is fixed now. + + - send-email learned configurable bcc and chain-reply-to. + + - "git remote show $remote" also talks about branches that + would be pushed if you run "git push remote". + + - Using objects from packs is now seriously optimized by clever + use of a cache. This should be most noticeable in git-log + family of commands that involve reading many tree objects. + In addition, traversing revisions while filtering changes + with pathspecs is made faster by terminating the comparison + between the trees as early as possible. + + +* Hooks + + - The part to send out notification e-mails was removed from + the sample update hook, as it was not an appropriate place + to do so. The proper place to do this is the new post-receive + hook. An example hook has been added to contrib/hooks/. + + +* Others + + - git-revert, git-gc and git-cherry-pick are now built-ins. + +Fixes since v1.5.0 +------------------ + +These are all in v1.5.0.x series. + +* Documentation updates + + - Clarifications and corrections to 1.5.0 release notes. + + - The main documentation did not link to git-remote documentation. + + - Clarified introductory text of git-rebase documentation. + + - Converted remaining mentions of update-index on Porcelain + documents to git-add/git-rm. + + - Some i18n.* configuration variables were incorrectly + described as core.*; fixed. + + - added and clarified core.bare, core.legacyheaders configurations. + + - updated "git-clone --depth" documentation. + + - user-manual updates. + + - Options to 'git remote add' were described insufficiently. + + - Configuration format.suffix was not documented. + + - Other formatting and spelling fixes. + + - user-manual has better cross references. + + - gitweb installation/deployment procedure is now documented. + + +* Bugfixes + + - git-upload-pack closes unused pipe ends; earlier this caused + many zombies to hang around. + + - git-rerere was recording the contents of earlier hunks + duplicated in later hunks. This prevented resolving the same + conflict when performing the same merge the other way around. + + - git-add and git-update-index on a filesystem on which + executable bits are unreliable incorrectly reused st_mode + bits even when the path changed between symlink and regular + file. + + - git-daemon marks the listening sockets with FD_CLOEXEC so + that it won't be leaked into the children. + + - segfault from git-blame when the mandatory pathname + parameter was missing was fixed; usage() message is given + instead. + + - git-rev-list did not read $GIT_DIR/config file, which means + that did not honor i18n.logoutputencoding correctly. + + - Automated merge conflict handling when changes to symbolic + links conflicted were completely broken. The merge-resolve + strategy created a regular file with conflict markers in it + in place of the symbolic link. The default strategy, + merge-recursive was even more broken. It removed the path + that was pointed at by the symbolic link. Both of these + problems have been fixed. + + - 'git diff maint master next' did not correctly give combined + diff across three trees. + + - 'git fast-import' portability fix for Solaris. + + - 'git show-ref --verify' without arguments did not error out + but segfaulted. + + - 'git diff :tracked-file `pwd`/an-untracked-file' gave an extra + slashes after a/ and b/. + + - 'git format-patch' produced too long filenames if the commit + message had too long line at the beginning. + + - Running 'make all' and then without changing anything + running 'make install' still rebuilt some files. This + was inconvenient when building as yourself and then + installing as root (especially problematic when the source + directory is on NFS and root is mapped to nobody). + + - 'git-rerere' failed to deal with two unconflicted paths that + sorted next to each other. + + - 'git-rerere' attempted to open(2) a symlink and failed if + there was a conflict. Since a conflicting change to a + symlink would not benefit from rerere anyway, the command + now ignores conflicting changes to symlinks. + + - 'git-repack' did not like to pass more than 64 arguments + internally to underlying 'rev-list' logic, which made it + impossible to repack after accumulating many (small) packs + in the repository. + + - 'git-diff' to review the combined diff during a conflicted + merge were not reading the working tree version correctly + when changes to a symbolic link conflicted. It should have + read the data using readlink(2) but read from the regular + file the symbolic link pointed at. + + - 'git-remote' did not like period in a remote's name. + + - 'git.el' honors the commit coding system from the configuration. + + - 'blameview' in contrib/ correctly digs deeper when a line is + clicked. + + - 'http-push' correctly makes sure the remote side has leading + path. Earlier it started in the middle of the path, and + incorrectly. + + - 'git-merge' did not exit with non-zero status when the + working tree was dirty and cannot fast forward. It does + now. + + - 'cvsexportcommit' does not lose yet-to-be-used message file. + + - int-vs-size_t typefix when running combined diff on files + over 2GB long. + + - 'git apply --whitespace=strip' should not touch unmodified + lines. + + - 'git-mailinfo' choke when a logical header line was too long. + + - 'git show A..B' did not error out. Negative ref ("not A" in + this example) does not make sense for the purpose of the + command, so now it errors out. + + - 'git fmt-merge-msg --file' without file parameter did not + correctly error out. + + - 'git archimport' barfed upon encountering a commit without + summary. + + - 'git index-pack' did not protect itself from getting a short + read out of pread(2). + + - 'git http-push' had a few buffer overruns. + + - Build dependency fixes to rebuild fetch.o when other headers + change. + + - git.el does not add duplicate sign-off lines. + + - git-commit shows the full stat of the resulting commit, not + just about the files in the current directory, when run from + a subdirectory. + + - "git-checkout -m '@{8 hours ago}'" had a funny failure from + eval; fixed. + + - git-merge (hence git-pull) did not refuse fast-forwarding + when the working tree had local changes that would have + conflicted with it. + + - a handful small fixes to gitweb. + + - build procedure for user-manual is fixed not to require locally + installed stylesheets. + + - "git commit $paths" on paths whose earlier contents were + already updated in the index were failing out. + + +* Tweaks + + - sliding mmap() inefficiently mmaped the same region of a + packfile with an access pattern that used objects in the + reverse order. This has been made more efficient. diff --git a/Documentation/RelNotes-1.5.2.1.txt b/Documentation/RelNotes-1.5.2.1.txt new file mode 100644 index 0000000..ebf20e2 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.1.txt @@ -0,0 +1,53 @@ +GIT v1.5.2.1 Release Notes +========================== + +Fixes since v1.5.2 +------------------ + +* Bugfixes + + - Temporary files that are used when invoking external diff + programs did not tolerate a long TMPDIR. + + - git-daemon did not notice when it could not write into its + pid file. + + - git-status did not honor core.excludesFile configuration like + git-add did. + + - git-annotate did not work from a subdirectory while + git-blame did. + + - git-cvsserver should have disabled access to a repository + with "gitcvs.pserver.enabled = false" set even when + "gitcvs.enabled = true" was set at the same time. It + didn't. + + - git-cvsimport did not work correctly in a repository with + its branch heads were packed with pack-refs. + + - ident unexpansion to squash "$Id: xxx $" that is in the + repository copy removed incorrect number of bytes. + + - git-svn misbehaved when the subversion repository did not + provide MD5 checksums for files. + + - git rebase (and git am) misbehaved on commits that have '\n' + (literally backslash and en, not a linefeed) in the title. + + - code to decode base85 used in binary patches had one error + return codepath wrong. + + - RFC2047 Q encoding output by git-format-patch used '_' for a + space, which is not understood by some programs. It uses =20 + which is safer. + + - git-fastimport --import-marks was broken; fixed. + + - A lot of documentation updates, clarifications and fixes. + +-- +exec >/var/tmp/1 +O=v1.5.2-65-g996e2d6 +echo O=`git describe refs/heads/maint` +git shortlog --no-merges $O..refs/heads/maint diff --git a/Documentation/RelNotes-1.5.2.2.txt b/Documentation/RelNotes-1.5.2.2.txt new file mode 100644 index 0000000..f6393f8 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.2.txt @@ -0,0 +1,61 @@ +GIT v1.5.2.2 Release Notes +========================== + +Fixes since v1.5.2.1 +-------------------- + +* Usability fix + + - git-gui is shipped with its updated blame interface. It is + rumored that the older one was not just unusable but was + active health hazard, but this one is actually pretty. + Please see for yourself. + +* Bugfixes + + - "git checkout fubar" was utterly confused when there is a + branch fubar and a tag fubar at the same time. It correctly + checks out the branch fubar now. + + - "git clone /path/foo" to clone a local /path/foo.git + repository left an incorrect configuration. + + - "git send-email" correctly unquotes RFC 2047 quoted names in + the patch-email before using their values. + + - We did not accept number of seconds since epoch older than + year 2000 as a valid timestamp. We now interpret positive + integers more than 8 digits as such, which allows us to + express timestamps more recent than March 1973. + + - git-cvsimport did not work when you have GIT_DIR to point + your repository at a nonstandard location. + + - Some systems (notably, Solaris) lack hstrerror() to make + h_errno human readable; prepare a replacement + implementation. + + - .gitignore file listed git-core.spec but what we generate is + git.spec, and nobody noticed for a long time. + + - "git-merge-recursive" does not try to run file level merge + on binary files. + + - "git-branch --track" did not create tracking configuration + correctly when the branch name had slash in it. + + - The email address of the user specified with user.email + configuration was overriden by EMAIL environment variable. + + - The tree parser did not warn about tree entries with + nonsense file modes, and assumed they must be blobs. + + - "git log -z" without any other request to generate diff still + invoked the diff machinery, wasting cycles. + +* Documentation + + - Many updates to fix stale or missing documentation. + + - Although our documentation was primarily meant to be formatted + with AsciiDoc7, formatting with AsciiDoc8 is supported better. diff --git a/Documentation/RelNotes-1.5.2.3.txt b/Documentation/RelNotes-1.5.2.3.txt new file mode 100644 index 0000000..addb229 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.3.txt @@ -0,0 +1,27 @@ +GIT v1.5.2.3 Release Notes +========================== + +Fixes since v1.5.2.2 +-------------------- + + * Bugfixes + + - Version 2 pack index format was introduced in version 1.5.2 + to support pack files that has offset that cannot be + represented in 32-bit. The runtime code to validate such + an index mishandled such an index for an empty pack. + + - Commit walkers (most notably, fetch over http protocol) + tried to traverse commit objects contained in trees (aka + subproject); they shouldn't. + + - A build option NO_R_TO_GCC_LINKER was not explained in Makefile + comment correctly. + + * Documentation Fixes and Updates + + - git-config --regexp was not documented properly. + + - git-repack -a was not documented properly. + + - git-remote -n was not documented properly. diff --git a/Documentation/RelNotes-1.5.2.4.txt b/Documentation/RelNotes-1.5.2.4.txt new file mode 100644 index 0000000..75cff47 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.4.txt @@ -0,0 +1,28 @@ +GIT v1.5.2.4 Release Notes +========================== + +Fixes since v1.5.2.3 +-------------------- + + * Bugfixes + + - "git-gui" bugfixes, including a handful fixes to run it + better on Cygwin/MSYS. + + - "git checkout" failed to switch back and forth between + branches, one of which has "frotz -> xyzzy" symlink and + file "xyzzy/filfre", while the other one has a file + "frotz/filfre". + + - "git prune" used to segfault upon seeing a commit that is + referred to by a tree object (aka "subproject"). + + - "git diff --name-status --no-index" mishandled an added file. + + - "git apply --reverse --whitespace=warn" still complained + about whitespaces that a forward application would have + introduced. + + * Documentation Fixes and Updates + + - A handful documentation updates. diff --git a/Documentation/RelNotes-1.5.2.5.txt b/Documentation/RelNotes-1.5.2.5.txt new file mode 100644 index 0000000..e8281c7 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.5.txt @@ -0,0 +1,30 @@ +GIT v1.5.2.5 Release Notes +========================== + +Fixes since v1.5.2.4 +-------------------- + + * Bugfixes + + - "git add -u" had a serious data corruption problem in one + special case (when the changes to a subdirectory's files + consist only deletion of files). + + - "git add -u <path>" did not work from a subdirectory. + + - "git apply" left an empty directory after all its files are + renamed away. + + - "git $anycmd foo/bar", when there is a file 'foo' in the + working tree, complained that "git $anycmd foo/bar --" form + should be used to disambiguate between revs and files, + which was completely bogus. + + - "git checkout-index" and other commands that checks out + files to the work tree tried unlink(2) on directories, + which is a sane thing to do on sane systems, but not on + Solaris when you are root. + + * Documentation Fixes and Updates + + - A handful documentation fixes. diff --git a/Documentation/RelNotes-1.5.2.txt b/Documentation/RelNotes-1.5.2.txt new file mode 100644 index 0000000..6195715 --- /dev/null +++ b/Documentation/RelNotes-1.5.2.txt @@ -0,0 +1,197 @@ +GIT v1.5.2 Release Notes +======================== + +Updates since v1.5.1 +-------------------- + +* Plumbing level superproject support. + + You can include a subdirectory that has an independent git + repository in your index and tree objects of your project + ("superproject"). This plumbing (i.e. "core") level + superproject support explicitly excludes recursive behaviour. + + The "subproject" entries in the index and trees of a superproject + are incompatible with older versions of git. Experimenting with + the plumbing level support is encouraged, but be warned that + unless everybody in your project updates to this release or + later, using this feature would make your project + inaccessible by people with older versions of git. + +* Plumbing level gitattributes support. + + The gitattributes mechanism allows you to add 'attributes' to + paths in your project, and affect the way certain git + operations work. Currently you can influence if a path is + considered a binary or text (the former would be treated by + 'git diff' not to produce textual output; the latter can go + through the line endings conversion process in repositories + with core.autocrlf set), expand and unexpand '$Id$' keyword + with blob object name, specify a custom 3-way merge driver, + and specify a custom diff driver. You can also apply + arbitrary filter to contents on check-in/check-out codepath + but this feature is an extremely sharp-edged razor and needs + to be handled with caution (do not use it unless you + understand the earlier mailing list discussion on keyword + expansion). These conversions apply when checking files in + or out, and exporting via git-archive. + +* The packfile format now optionally suports 64-bit index. + + This release supports the "version 2" format of the .idx + file. This is automatically enabled when a huge packfile + needs more than 32-bit to express offsets of objects in the + pack. + +* Comes with an updated git-gui 0.7.1 + +* Updated gitweb: + + - can show combined diff for merges; + - uses font size of user's preference, not hardcoded in pixels; + - can now 'grep'; + +* New commands and options. + + - "git bisect start" can optionally take a single bad commit and + zero or more good commits on the command line. + + - "git shortlog" can optionally be told to wrap its output. + + - "subtree" merge strategy allows another project to be merged in as + your subdirectory. + + - "git format-patch" learned a new --subject-prefix=<string> + option, to override the built-in "[PATCH]". + + - "git add -u" is a quick way to do the first stage of "git + commit -a" (i.e. update the index to match the working + tree); it obviously does not make a commit. + + - "git clean" honors a new configuration, "clean.requireforce". When + set to true, this makes "git clean" a no-op, preventing you + from losing files by typing "git clean" when you meant to + say "make clean". You can still say "git clean -f" to + override this. + + - "git log" family of commands learned --date={local,relative,default} + option. --date=relative is synonym to the --relative-date. + --date=local gives the timestamp in local timezone. + +* Updated behavior of existing commands. + + - When $GIT_COMMITTER_EMAIL or $GIT_AUTHOR_EMAIL is not set + but $EMAIL is set, the latter is used as a substitute. + + - "git diff --stat" shows size of preimage and postimage blobs + for binary contents. Earlier it only said "Bin". + + - "git lost-found" shows stuff that are unreachable except + from reflogs. + + - "git checkout branch^0" now detaches HEAD at the tip commit + on the named branch, instead of just switching to the + branch (use "git checkout branch" to switch to the branch, + as before). + + - "git bisect next" can be used after giving only a bad commit + without giving a good one (this starts bisection half-way to + the root commit). We used to refuse to operate without a + good and a bad commit. + + - "git push", when pushing into more than one repository, does + not stop at the first error. + + - "git archive" does not insist you to give --format parameter + anymore; it defaults to "tar". + + - "git cvsserver" can use backends other than sqlite. + + - "gitview" (in contrib/ section) learned to better support + "git-annotate". + + - "git diff $commit1:$path2 $commit2:$path2" can now report + mode changes between the two blobs. + + - Local "git fetch" from a repository whose object store is + one of the alternates (e.g. fetching from the origin in a + repository created with "git clone -l -s") avoids + downloading objects unnecessarily. + + - "git blame" uses .mailmap to canonicalize the author name + just like "git shortlog" does. + + - "git pack-objects" pays attention to pack.depth + configuration variable. + + - "git cherry-pick" and "git revert" does not use .msg file in + the working tree to prepare commit message; instead it uses + $GIT_DIR/MERGE_MSG as other commands do. + +* Builds + + - git-p4import has never been installed; now there is an + installation option to do so. + + - gitk and git-gui can be configured out. + + - Generated documentation pages automatically get version + information from GIT_VERSION. + + - Parallel build with "make -j" descending into subdirectory + was fixed. + +* Performance Tweaks + + - Optimized "git-rev-list --bisect" (hence "git-bisect"). + + - Optimized "git-add $path" in a large directory, most of + whose contents are ignored. + + - Optimized "git-diff-tree" for reduced memory footprint. + + - The recursive merge strategy updated a worktree file that + was changed identically in two branches, when one of them + renamed it. We do not do that when there is no rename, so + match that behaviour. This avoids excessive rebuilds. + + - The default pack depth has been increased to 50, as the + recent addition of delta_base_cache makes deeper delta chains + much less expensive to access. Depending on the project, it was + reported that this reduces the resulting pack file by 10% + or so. + + +Fixes since v1.5.1 +------------------ + +All of the fixes in v1.5.1 maintenance series are included in +this release, unless otherwise noted. + +* Bugfixes + + - Switching branches with "git checkout" refused to work when + a path changes from a file to a directory between the + current branch and the new branch, in order not to lose + possible local changes in the directory that is being turned + into a file with the switch. We now allow such a branch + switch after making sure that there is no locally modified + file nor un-ignored file in the directory. This has not + been backported to 1.5.1.x series, as it is rather an + intrusive change. + + - Merging branches that have a file in one and a directory in + another at the same path used to get quite confused. We + handle such a case a bit more carefully, even though that is + still left as a conflict for the user to sort out. This + will not be backported to 1.5.1.x series, as it is rather an + intrusive change. + + - git-fetch had trouble with a remote with insanely large number + of refs. + + - "git clean -d -X" now does not remove non-excluded directories. + + - rebasing (without -m) a series that changes a symlink to a directory + in the middle of a path confused git-apply greatly and refused to + operate. diff --git a/Documentation/RelNotes-1.5.3.1.txt b/Documentation/RelNotes-1.5.3.1.txt new file mode 100644 index 0000000..7ff546c --- /dev/null +++ b/Documentation/RelNotes-1.5.3.1.txt @@ -0,0 +1,10 @@ +GIT v1.5.3.1 Release Notes +========================== + +Fixes since v1.5.3 +------------------ + +This is solely to fix the generated RPM's dependencies. We used +to have git-p4 package but we do not anymore. As suggested on +the mailing list, this release makes git-core "Obsolete" git-p4, +so that yum update would not complain. diff --git a/Documentation/RelNotes-1.5.3.2.txt b/Documentation/RelNotes-1.5.3.2.txt new file mode 100644 index 0000000..4bbde3c --- /dev/null +++ b/Documentation/RelNotes-1.5.3.2.txt @@ -0,0 +1,58 @@ +GIT v1.5.3.2 Release Notes +========================== + +Fixes since v1.5.3.1 +-------------------- + + * git-push sent thin packs by default, which was not good for + the public distribution server (no point in saving transfer + while pushing; no point in making the resulting pack less + optimum). + + * git-svn sometimes terminated with "Malformed network data" when + talking over svn:// protocol. + + * git-send-email re-issued the same message-id about 10% of the + time if you fired off 30 messages within a single second. + + * git-stash was not terminating the log message of commits it + internally creates with LF. + + * git-apply failed to check the size of the patch hunk when its + beginning part matched the remainder of the preimage exactly, + even though the preimage recorded in the hunk was much larger + (therefore the patch should not have applied), leading to a + segfault. + + * "git rm foo && git commit foo" complained that 'foo' needs to + be added first, instead of committing the removal, which was a + nonsense. + + * git grep -c said "/dev/null: 0". + + * git-add -u failed to recognize a blob whose type changed + between the index and the work tree. + + * The limit to rename detection has been tightened a lot to + reduce performance problems with a huge change. + + * cvsimport and svnimport barfed when the input tried to move + a tag. + + * "git apply -pN" did not chop the right number of directories. + + * "git svnimport" did not like SVN tags with funny characters in them. + + * git-gui 0.8.3, with assorted fixes, including: + + - font-chooser on X11 was unusable with large number of fonts; + - a diff that contained a deleted symlink made it barf; + - an untracked symbolic link to a directory made it fart; + - a file with % in its name made it vomit; + + +Documentation updates +--------------------- + +User manual has been somewhat restructured. I think the new +organization is much easier to read. diff --git a/Documentation/RelNotes-1.5.3.3.txt b/Documentation/RelNotes-1.5.3.3.txt new file mode 100644 index 0000000..d213846 --- /dev/null +++ b/Documentation/RelNotes-1.5.3.3.txt @@ -0,0 +1,31 @@ +GIT v1.5.3.3 Release Notes +========================== + +Fixes since v1.5.3.2 +-------------------- + + * git-quiltimport did not like it when a patch described in the + series file does not exist. + + * p4 importer missed executable bit in some cases. + + * The default shell on some FreeBSD did not execute the + argument parsing code correctly and made git unusable. + + * git-svn incorrectly spawned pager even when the user + explicitly asked not to. + + * sample post-receive hook overquoted the envelope sender + value. + + * git-am got confused when the patch contained a change that is + only about type and not contents. + + * git-mergetool did not show our and their version of the + conflicted file when started from a subdirectory of the + project. + + * git-mergetool did not pass correct options when invoking diff3. + + * git-log sometimes invoked underlying "diff" machinery + unnecessarily. diff --git a/Documentation/RelNotes-1.5.3.4.txt b/Documentation/RelNotes-1.5.3.4.txt new file mode 100644 index 0000000..b04b3a4 --- /dev/null +++ b/Documentation/RelNotes-1.5.3.4.txt @@ -0,0 +1,35 @@ +GIT v1.5.3.4 Release Notes +========================== + +Fixes since v1.5.3.3 +-------------------- + + * Change to "git-ls-files" in v1.5.3.3 that was introduced to support + partial commit of removal better had a segfaulting bug, which was + diagnosed and fixed by Keith and Carl. + + * Performance improvements for rename detection has been backported + from the 'master' branch. + + * "git-for-each-ref --format='%(numparent)'" was not working + correctly at all, and --format='%(parent)' was not working for + merge commits. + + * Sample "post-receive-hook" incorrectly sent out push + notification e-mails marked as "From: " the committer of the + commit that happened to be at the tip of the branch that was + pushed, not from the person who pushed. + + * "git-remote" did not exit non-zero status upon error. + + * "git-add -i" did not respond very well to EOF from tty nor + bogus input. + + * "git-rebase -i" squash subcommand incorrectly made the + author of later commit the author of resulting commit, + instead of taking from the first one in the squashed series. + + * "git-stash apply --index" was not documented. + + * autoconfiguration learned that "ar" command is found as "gas" on + some systems. diff --git a/Documentation/RelNotes-1.5.3.5.txt b/Documentation/RelNotes-1.5.3.5.txt new file mode 100644 index 0000000..7ff1d5d --- /dev/null +++ b/Documentation/RelNotes-1.5.3.5.txt @@ -0,0 +1,94 @@ +GIT v1.5.3.5 Release Notes +========================== + +Fixes since v1.5.3.4 +-------------------- + + * Comes with git-gui 0.8.4. + + * "git-config" silently ignored options after --list; now it will + error out with a usage message. + + * "git-config --file" failed if the argument used a relative path + as it changed directories before opening the file. + + * "git-config --file" now displays a proper error message if it + cannot read the file specified on the command line. + + * "git-config", "git-diff", "git-apply" failed if run from a + subdirectory with relative GIT_DIR and GIT_WORK_TREE set. + + * "git-blame" crashed if run during a merge conflict. + + * "git-add -i" did not handle single line hunks correctly. + + * "git-rebase -i" and "git-stash apply" failed if external diff + drivers were used for one or more files in a commit. They now + avoid calling the external diff drivers. + + * "git-log --follow" did not work unless diff generation (e.g. -p) + was also requested. + + * "git-log --follow -B" did not work at all. Fixed. + + * "git-log -M -B" did not correctly handle cases of very large files + being renamed and replaced by very small files in the same commit. + + * "git-log" printed extra newlines between commits when a diff + was generated internally (e.g. -S or --follow) but not displayed. + + * "git-push" error message is more helpful when pushing to a + repository with no matching refs and none specified. + + * "git-push" now respects + (force push) on wildcard refspecs, + matching the behavior of git-fetch. + + * "git-filter-branch" now updates the working directory when it + has finished filtering the current branch. + + * "git-instaweb" no longer fails on Mac OS X. + + * "git-cvsexportcommit" didn't always create new parent directories + before trying to create new child directories. Fixed. + + * "git-fetch" printed a scary (but bogus) error message while + fetching a tag that pointed to a tree or blob. The error did + not impact correctness, only user perception. The bogus error + is no longer printed. + + * "git-ls-files --ignored" did not properly descend into non-ignored + directories that themselves contained ignored files if d_type + was not supported by the filesystem. This bug impacted systems + such as AFS. Fixed. + + * Git segfaulted when reading an invalid .gitattributes file. Fixed. + + * post-receive-email example hook was fixed for non-fast-forward + updates. + + * Documentation updates for supported (but previously undocumented) + options of "git-archive" and "git-reflog". + + * "make clean" no longer deletes the configure script that ships + with the git tarball, making multiple architecture builds easier. + + * "git-remote show origin" spewed a warning message from Perl + when no remote is defined for the current branch via + branch.<name>.remote configuration settings. + + * Building with NO_PERL_MAKEMAKER excessively rebuilt contents + of perl/ subdirectory by rewriting perl.mak. + + * http.sslVerify configuration settings were not used in scripted + Porcelains. + + * "git-add" leaked a bit of memory while scanning for files to add. + + * A few workarounds to squelch false warnings from recent gcc have + been added. + + * "git-send-pack $remote frotz" segfaulted when there is nothing + named 'frotz' on the local end. + + * "git-rebase --interactive" did not handle its "--strategy" option + properly. diff --git a/Documentation/RelNotes-1.5.3.6.txt b/Documentation/RelNotes-1.5.3.6.txt new file mode 100644 index 0000000..069a2b2 --- /dev/null +++ b/Documentation/RelNotes-1.5.3.6.txt @@ -0,0 +1,48 @@ +GIT v1.5.3.6 Release Notes +========================== + +Fixes since v1.5.3.5 +-------------------- + + * git-cvsexportcommit handles root commits better. + + * git-svn dcommit used to clobber when sending a series of + patches. + + * git-svn dcommit failed after attempting to rebase when + started with a dirty index; now it stops upfront. + + * git-grep sometimes refused to work when your index was + unmerged. + + * "git-grep -A1 -B2" acted as if it was told to run "git -A1 -B21". + + * git-hash-object did not honor configuration variables, such as + core.compression. + + * git-index-pack choked on a huge pack on 32-bit machines, even when + large file offsets are supported. + + * atom feeds from git-web said "10" for the month of November. + + * a memory leak in commit walker was plugged. + + * When git-send-email inserted the original author's From: + address in body, it did not mark the message with + Content-type: as needed. + + * git-revert and git-cherry-pick incorrectly refused to start + when the work tree was dirty. + + * git-clean did not honor core.excludesfile configuration. + + * git-add mishandled ".gitignore" files when applying them to + subdirectories. + + * While importing a too branchy history, git-fastimport did not + honor delta depth limit properly. + + * Support for zlib implementations that lack ZLIB_VERNUM and definition + of deflateBound() has been added. + + * Quite a lot of documentation clarifications. diff --git a/Documentation/RelNotes-1.5.3.7.txt b/Documentation/RelNotes-1.5.3.7.txt new file mode 100644 index 0000000..2f69061 --- /dev/null +++ b/Documentation/RelNotes-1.5.3.7.txt @@ -0,0 +1,45 @@ +GIT v1.5.3.7 Release Notes +========================== + +Fixes since v1.5.3.6 +-------------------- + + * git-send-email added 8-bit contents to the payload without + marking it as 8-bit in a CTE header. + + * "git-bundle create a.bndl HEAD" dereferenced the symref and + did not record the ref as 'HEAD'; this prevented a bundle + from being used as a normal source of git-clone. + + * The code to reject nonsense command line of the form + "git-commit -a paths..." and "git-commit --interactive + paths..." were broken. + + * Adding a signature that is not ASCII-only to an original + commit that is ASCII-only would make the result non-ASCII. + "git-format-patch -s" did not mark such a message correctly + with MIME encoding header. + + * git-add sometimes did not mark the resulting index entry + stat-clean. This affected only cases when adding the + contents with the same length as the previously staged + contents, and the previous staging made the index entry + "racily clean". + + * git-commit did not honor GIT_INDEX_FILE the user had in the + environment. + + * When checking out a revision, git-checkout did not report where the + updated HEAD is if you happened to have a file called HEAD in the + work tree. + + * "git-rev-list --objects" mishandled a tree that points at a + submodule. + + * "git cvsimport" was not ready for packed refs that "git gc" can + produce and gave incorrect results. + + * Many scripted Porcelains were confused when you happened to have a + file called "HEAD" in your work tree. + +Also it contains updates to the user manual and documentation. diff --git a/Documentation/RelNotes-1.5.3.8.txt b/Documentation/RelNotes-1.5.3.8.txt new file mode 100644 index 0000000..0e3ff58 --- /dev/null +++ b/Documentation/RelNotes-1.5.3.8.txt @@ -0,0 +1,25 @@ +GIT v1.5.3.8 Release Notes +========================== + +Fixes since v1.5.3.7 +-------------------- + + * Some documentation used "email.com" as an example domain. + + * git-svn fix to handle funky branch and project names going over + http/https correctly. + + * git-svn fix to tone down a needlessly alarming warning message. + + * git-clone did not correctly report errors while fetching over http. + + * git-send-email added redundant Message-Id: header to the outgoing + e-mail when the patch text already had one. + + * a read-beyond-end-of-buffer bug in configuration file updater was fixed. + + * git-grep used to show the same hit repeatedly for unmerged paths. + + * After amending the patch title in "git-am -i", the command did not + report the patch it applied with the updated title. + diff --git a/Documentation/RelNotes-1.5.3.txt b/Documentation/RelNotes-1.5.3.txt new file mode 100644 index 0000000..d03894b --- /dev/null +++ b/Documentation/RelNotes-1.5.3.txt @@ -0,0 +1,366 @@ +GIT v1.5.3 Release Notes +======================== + +Updates since v1.5.2 +-------------------- + +* The commit walkers other than http are officially deprecated, + but still supported for now. + +* The submodule support has Porcelain layer. + + Note that the current submodule support is minimal and this is + deliberately so. A design decision we made is that operations + at the supermodule level do not recurse into submodules by + default. The expectation is that later we would add a + mechanism to tell git which submodules the user is interested + in, and this information might be used to determine the + recursive behaviour of certain commands (e.g. "git checkout" + and "git diff"), but currently we haven't agreed on what that + mechanism should look like. Therefore, if you use submodules, + you would probably need "git submodule update" on the + submodules you care about after running a "git checkout" at + the supermodule level. + +* There are a handful pack-objects changes to help you cope better + with repositories with pathologically large blobs in them. + +* For people who need to import from Perforce, a front-end for + fast-import is in contrib/fast-import/. + +* Comes with git-gui 0.8.2. + +* Comes with updated gitk. + +* New commands and options. + + - "git log --date=<format>" can use more formats: iso8601, rfc2822. + + - The hunk header output from "git diff" family can be customized + with the attributes mechanism. See gitattributes(5) for details. + + - "git stash" allows you to quickly save away your work in + progress and replay it later on an updated state. + + - "git rebase" learned an "interactive" mode that let you + pick and reorder which commits to rebuild. + + - "git fsck" can save its findings in $GIT_DIR/lost-found, without a + separate invocation of "git lost-found" command. The blobs stored by + lost-found are stored in plain format to allow you to grep in them. + + - $GIT_WORK_TREE environment variable can be used together with + $GIT_DIR to work in a subdirectory of a working tree that is + not located at "$GIT_DIR/..". + + - Giving "--file=<file>" option to "git config" is the same as + running the command with GIT_CONFIG=<file> environment. + + - "git log" learned a new option "--follow", to follow + renaming history of a single file. + + - "git filter-branch" lets you rewrite the revision history of + specified branches. You can specify a number of filters to + modify the commits, files and trees. + + - "git cvsserver" learned new options (--base-path, --export-all, + --strict-paths) inspired by "git daemon". + + - "git daemon --base-path-relaxed" can help migrating a repository URL + that did not use to use --base-path to use --base-path. + + - "git commit" can use "-t templatefile" option and commit.template + configuration variable to prime the commit message given to you in the + editor. + + - "git submodule" command helps you manage the projects from + the superproject that contain them. + + - In addition to core.compression configuration option, + core.loosecompression and pack.compression options can + independently tweak zlib compression levels used for loose + and packed objects. + + - "git ls-tree -l" shows size of blobs pointed at by the + tree entries, similar to "/bin/ls -l". + + - "git rev-list" learned --regexp-ignore-case and + --extended-regexp options to tweak its matching logic used + for --grep fitering. + + - "git describe --contains" is a handier way to call more + obscure command "git name-rev --tags". + + - "git gc --aggressive" tells the command to spend more cycles + to optimize the repository harder. + + - "git repack" learned a "window-memory" limit which + dynamically reduces the window size to stay within the + specified memory usage. + + - "git repack" can be told to split resulting packs to avoid + exceeding limit specified with "--max-pack-size". + + - "git fsck" gained --verbose option. This is really really + verbose but it might help you identify exact commit that is + corrupt in your repository. + + - "git format-patch" learned --numbered-files option. This + may be useful for MH users. + + - "git format-patch" learned format.subjectprefix configuration + variable, which serves the same purpose as "--subject-prefix" + option. + + - "git tag -n -l" shows tag annotations while listing tags. + + - "git cvsimport" can optionally use the separate-remote layout. + + - "git blame" can be told to see through commits that change + whitespaces and indentation levels with "-w" option. + + - "git send-email" can be told not to thread the messages when + sending out more than one patches. + + - "git send-email" can also be told how to find whom to cc the + message to for each message via --cc-cmd. + + - "git config" learned NUL terminated output format via -z to + help scripts. + + - "git add" learned "--refresh <paths>..." option to selectively refresh + the cached stat information. + + - "git init -q" makes the command quieter. + + - "git -p command" now has a cousin of opposite sex, "git --no-pager + command". + +* Updated behavior of existing commands. + + - "gitweb" can offer multiple snapshot formats. + + ***NOTE*** Unfortunately, this changes the format of the + $feature{snapshot}{default} entry in the per-site + configuration file 'gitweb_config.perl'. It used to be a + three-element tuple that describe a single format; with the + new configuration item format, you only have to say the name + of the format ('tgz', 'tbz2' or 'zip'). Please update the + your configuration file accordingly. + + - "git clone" uses -l (hardlink files under .git) by default when + cloning locally. + + - URL used for "git clone" and friends can specify nonstandard SSH port + by using ssh://host:port/path/to/repo syntax. + + - "git bundle create" can now create a bundle without negative refs, + i.e. "everything since the beginning up to certain points". + + - "git diff" (but not the plumbing level "git diff-tree") now + recursively descends into trees by default. + + - "git diff" does not show differences that come only from + stat-dirtiness in the form of "diff --git" header anymore. + It runs "update-index --refresh" silently as needed. + + - "git tag -l" used to match tags by globbing its parameter as if it + has wildcard '*' on both ends, which made "git tag -l gui" to match + tag 'gitgui-0.7.0'; this was very annoying. You now have to add + asterisk on the sides you want to wildcard yourself. + + - The editor to use with many interactive commands can be + overridden with GIT_EDITOR environment variable, or if it + does not exist, with core.editor configuration variable. As + before, if you have neither, environment variables VISUAL + and EDITOR are consulted in this order, and then finally we + fall back on "vi". + + - "git rm --cached" does not complain when removing a newly + added file from the index anymore. + + - Options to "git log" to affect how --grep/--author options look for + given strings now have shorter abbreviations. -i is for ignore case, + and -E is for extended regexp. + + - "git log" learned --log-size to show the number of bytes in + the log message part of the output to help qgit. + + - "git log --name-status" does not require you to give "-r" anymore. + As a general rule, Porcelain commands should recurse when showing + diff. + + - "git format-patch --root A" can be used to format everything + since the beginning up to A. This was supported with + "git format-patch --root A A" for a long time, but was not + properly documented. + + - "git svn dcommit" retains local merge information. + + - "git svnimport" allows an empty string to be specified as the + trunk/ directory. This is necessary to suck data from a SVN + repository that doe not have trunk/ branches/ and tags/ organization + at all. + + - "git config" to set values also honors type flags like --bool + and --int. + + - core.quotepath configuration can be used to make textual git + output to emit most of the characters in the path literally. + + - "git mergetool" chooses its backend more wisely, taking + notice of its environment such as use of X, Gnome/KDE, etc. + + - "gitweb" shows merge commits a lot nicer than before. The + default view uses more compact --cc format, while the UI + allows to choose normal diff with any parent. + + - snapshot files "gitweb" creates from a repository at + $path/$project/.git are more useful. We use $project part + in the filename, which we used to discard. + + - "git cvsimport" creates lightweight tags; there is no + interesting information we can record in an annotated tag, + and the handcrafted ones the old code created was not + properly formed anyway. + + - "git push" pretends that you immediately fetched back from + the remote by updating corresponding remote tracking + branches if you have any. + + - The diffstat given after a merge (or a pull) honors the + color.diff configuration. + + - "git commit --amend" is now compatible with various message source + options such as -m/-C/-c/-F. + + - "git apply --whitespace=strip" removes blank lines added at + the end of the file. + + - "git fetch" over git native protocols with "-v" option shows + connection status, and the IP address of the other end, to + help diagnosing problems. + + - We used to have core.legacyheaders configuration, when + set to false, allowed git to write loose objects in a format + that mimicks the format used by objects stored in packs. It + turns out that this was not so useful. Although we will + continue to read objects written in that format, we do not + honor that configuration anymore and create loose objects in + the legacy/traditional format. + + - "--find-copies-harder" option to diff family can now be + spelled as "-C -C" for brevity. + + - "git mailsplit" (hence "git am") can read from Maildir + formatted mailboxes. + + - "git cvsserver" does not barf upon seeing "cvs login" + request. + + - "pack-objects" honors "delta" attribute set in + .gitattributes. It does not attempt to deltify blobs that + come from paths with delta attribute set to false. + + - "new-workdir" script (in contrib) can now be used with a + bare repository. + + - "git mergetool" learned to use gvimdiff. + + - "gitview" (in contrib) has a better blame interface. + + - "git log" and friends did not handle a commit log message + that is larger than 16kB; they do now. + + - "--pretty=oneline" output format for "git log" and friends + deals with "malformed" commit log messages that have more + than one lines in the first paragraph better. We used to + show the first line, cutting the title at mid-sentence; we + concatenate them into a single line and treat the result as + "oneline". + + - "git p4import" has been demoted to contrib status. For + a superior option, checkout the "git p4" front end to + "git fast-import" (also in contrib). The man page and p4 + rpm have been removed as well. + + - "git mailinfo" (hence "am") now tries to see if the message + is in utf-8 first, instead of assuming iso-8859-1, if + incoming e-mail does not say what encoding it is in. + +* Builds + + - old-style function definitions (most notably, a function + without parameter defined with "func()", not "func(void)") + have been eradicated. + + - "git tag" and "git verify-tag" have been rewritten in C. + +* Performance Tweaks + + - "git pack-objects" avoids re-deltification cost by caching + small enough delta results it creates while looking for the + best delta candidates. + + - "git pack-objects" learned a new heuristcs to prefer delta + that is shallower in depth over the smallest delta + possible. This improves both overall packfile access + performance and packfile density. + + - diff-delta code that is used for packing has been improved + to work better on big files. + + - when there are more than one pack files in the repository, + the runtime used to try finding an object always from the + newest packfile; it now tries the same packfile as we found + the object requested the last time, which exploits the + locality of references. + + - verifying pack contents done by "git fsck --full" got boost + by carefully choosing the order to verify objects in them. + + - "git read-tree -m" to read into an already populated index + has been optimized vastly. The effect of this can be seen + when switching branches that have differences in only a + handful paths. + + - "git add paths..." and "git commit paths..." has also been + heavily optimized. + +Fixes since v1.5.2 +------------------ + +All of the fixes in v1.5.2 maintenance series are included in +this release, unless otherwise noted. + +* Bugfixes + + - "gitweb" had trouble handling non UTF-8 text with older + Encode.pm Perl module. + + - "git svn" misparsed the data from the commits in the repository when + the user had "color.diff = true" in the configuration. This has been + fixed. + + - There was a case where "git svn dcommit" clobbered changes made on the + SVN side while committing multiple changes. + + - "git-write-tree" had a bad interaction with racy-git avoidance and + gitattributes mechanisms. + + - "git --bare command" overrode existing GIT_DIR setting and always + made it treat the current working directory as GIT_DIR. + + - "git ls-files --error-unmatch" does not complain if you give the + same path pattern twice by mistake. + + - "git init" autodetected core.filemode but not core.symlinks, which + made a new directory created automatically by "git clone" cumbersome + to use on filesystems that require these configurations to be set. + + - "git log" family of commands behaved differently when run as "git + log" (no pathspec) and as "git log --" (again, no pathspec). This + inconsistency was introduced somewhere in v1.3.0 series but now has + been corrected. + + - "git rebase -m" incorrectly displayed commits that were skipped. diff --git a/Documentation/RelNotes-1.5.4.1.txt b/Documentation/RelNotes-1.5.4.1.txt new file mode 100644 index 0000000..d4e44b8 --- /dev/null +++ b/Documentation/RelNotes-1.5.4.1.txt @@ -0,0 +1,17 @@ +GIT v1.5.4.1 Release Notes +========================== + +Fixes since v1.5.4 +------------------ + + * "git-commit -C $tag" used to work but rewrite in C done in + 1.5.4 broke it. + + * An entry in the .gitattributes file that names a pattern in a + subdirectory of the directory it is in did not match + correctly (e.g. pattern "b/*.c" in "a/.gitattributes" should + match "a/b/foo.c" but it didn't). + + * Customized color specification was parsed incorrectly when + numeric color values are used. This was fixed in 1.5.4.1. + diff --git a/Documentation/RelNotes-1.5.4.2.txt b/Documentation/RelNotes-1.5.4.2.txt new file mode 100644 index 0000000..21d0df5 --- /dev/null +++ b/Documentation/RelNotes-1.5.4.2.txt @@ -0,0 +1,43 @@ +GIT v1.5.4.2 Release Notes +========================== + +Fixes since v1.5.4 +------------------ + + * The configuration parser was not prepared to see string + valued variables misspelled as boolean and segfaulted. + + * Temporary files left behind due to interrupted object + transfers were not cleaned up with "git prune". + + * "git config --unset" was confused when the unset variables + were spelled with continuation lines in the config file. + + * The merge message detection in "git cvsimport" did not catch + a message that began with "Merge...". + + * "git status" suggests "git rm --cached" for unstaging the + earlier "git add" before the initial commit. + + * "git status" output was incorrect during a partial commit. + + * "git bisect" refused to start when the HEAD was detached. + + * "git bisect" allowed a wildcard character in the commit + message expanded while writing its log file. + + * Manual pages were not formatted correctly with docbook xsl + 1.72; added a workaround. + + * "git-commit -C $tag" used to work but rewrite in C done in + 1.5.4 broke it. This was fixed in 1.5.4.1. + + * An entry in the .gitattributes file that names a pattern in a + subdirectory of the directory it is in did not match + correctly (e.g. pattern "b/*.c" in "a/.gitattributes" should + match "a/b/foo.c" but it didn't). This was fixed in 1.5.4.1. + + * Customized color specification was parsed incorrectly when + numeric color values are used. This was fixed in 1.5.4.1. + + * http transport misbehaved when linked with curl-gnutls. diff --git a/Documentation/RelNotes-1.5.4.3.txt b/Documentation/RelNotes-1.5.4.3.txt new file mode 100644 index 0000000..b0fc67f --- /dev/null +++ b/Documentation/RelNotes-1.5.4.3.txt @@ -0,0 +1,27 @@ +GIT v1.5.4.3 Release Notes +========================== + +Fixes since v1.5.4.2 +-------------------- + + * RPM spec used to pull in everything with 'git'. This has been + changed so that 'git' package contains just the core parts, + and we now supply 'git-all' metapackage to slurp in everything. + This should match end user's expectation better. + + * When some refs failed to update, git-push reported "failure" + which was unclear if some other refs were updated or all of + them failed atomically (the answer is the former). Reworded + the message to clarify this. + + * "git clone" from a repository whose HEAD was misconfigured + did not set up the remote properly. Now it tries to do + better. + + * Updated git-push documentation to clarify what "matching" + means, in order to reduce user confusion. + + * Updated git-add documentation to clarify "add -u" operates in + the current subdirectory you are in, just like other commands. + + * git-gui updates to work on OSX and Windows better. diff --git a/Documentation/RelNotes-1.5.4.4.txt b/Documentation/RelNotes-1.5.4.4.txt new file mode 100644 index 0000000..5635977 --- /dev/null +++ b/Documentation/RelNotes-1.5.4.4.txt @@ -0,0 +1,46 @@ +GIT v1.5.4.4 Release Notes +========================== + +Fixes since v1.5.4.3 +-------------------- + + * Building and installing with an overtight umask such as 077 made + installed templates unreadable by others, while the rest of the install + are done in a way that is friendly to umask 022. + + * "git cvsexportcommit -w $cvsdir" misbehaved when GIT_DIR is set to a + relative directory. + + * "git http-push" had an invalid memory access that could lead it to + segfault. + + * When "git rebase -i" gave control back to the user for a commit that is + marked to be edited, it just said "modify it with commit --amend", + without saying what to do to continue after modifying it. Give an + explicit instruction to run "rebase --continue" to be more helpful. + + * "git send-email" in 1.5.4.3 issued a bogus empty In-Reply-To: header. + + * "git bisect" showed mysterious "won't bisect on seeked tree" error message. + This was leftover from Cogito days to prevent "bisect" starting from a + cg-seeked state. We still keep the Cogito safety, but running "git bisect + start" when another bisect was in effect will clean up and start over. + + * "git push" with an explicit PATH to receive-pack did not quite work if + receive-pack was not on usual PATH. We earlier fixed the same issue + with "git fetch" and upload-pack, but somehow forgot to do so in the + other direction. + + * git-gui's info dialog was not displayed correctly when the user tries + to commit nothing (i.e. without staging anything). + + * "git revert" did not properly fail when attempting to run with a + dirty index. + +Also included are a handful documentation updates. + +--- +exec >/var/tmp/1 +echo O=$(git describe maint) +O=v1.5.4.3-32-g0f2d447 +git shortlog --no-merges $O..maint diff --git a/Documentation/RelNotes-1.5.4.txt b/Documentation/RelNotes-1.5.4.txt new file mode 100644 index 0000000..f1323b6 --- /dev/null +++ b/Documentation/RelNotes-1.5.4.txt @@ -0,0 +1,377 @@ +GIT v1.5.4 Release Notes +======================== + +Removal +------- + + * "git svnimport" was removed in favor of "git svn". It is still there + in the source tree (contrib/examples) but unsupported. + + * As git-commit and git-status have been rewritten, "git runstatus" + helper script lost all its users and has been removed. + + +Temporarily disabled +-------------------- + + * "git http-push" is known not to work well with cURL library older + than 7.16, and we had reports of repository corruption. It is + disabled on such platforms for now. Unfortunately, 1.5.3.8 shares + the same issue. In other words, this does not mean you will be + fine if you stick to an older git release. For now, please do not + use http-push from older git with cURL older than 7.16 if you + value your data. A proper fix will hopefully materialize in + later versions. + + +Deprecation notices +------------------- + + * From v1.6.0, git will by default install dashed form of commands + (e.g. "git-commit") outside of users' normal $PATH, and will install + only selected commands ("git" itself, and "gitk") in $PATH. This + implies: + + - Using dashed forms of git commands (e.g. "git-commit") from the + command line has been informally deprecated since early 2006, but + now it officially is, and will be removed in the future. Use + dash-less forms (e.g. "git commit") instead. + + - Using dashed forms from your scripts, without first prepending the + return value from "git --exec-path" to the scripts' PATH, has been + informally deprecated since early 2006, but now it officially is. + + - Use of dashed forms with "PATH=$(git --exec-path):$PATH; export + PATH" early in your script is not deprecated with this change. + + Users are strongly encouraged to adjust their habits and scripts now + to prepare for this change. + + * The post-receive hook was introduced in March 2007 to supersede + the post-update hook, primarily to overcome the command line length + limitation of the latter. Use of post-update hook will be deprecated + in future versions of git, starting from v1.6.0. + + * "git lost-found" was deprecated in favor of "git fsck"'s --lost-found + option, and will be removed in the future. + + * "git peek-remote" is deprecated, as "git ls-remote" was written in C + and works for all transports; "git peek-remote" will be removed in + the future. + + * "git repo-config" which was an old name for "git config" command + has been supported without being advertised for a long time. The + next feature release will remove it. + + * From v1.6.0, the repack.usedeltabaseoffset config option will default + to true, which will give denser packfiles (i.e. more efficient storage). + The downside is that git older than version 1.4.4 will not be able + to directly use a repository packed using this setting. + + * From v1.6.0, the pack.indexversion config option will default to 2, + which is slightly more efficient, and makes repacking more immune to + data corruptions. Git older than version 1.5.2 may revert to version 1 + of the pack index with a manual "git index-pack" to be able to directly + access corresponding pack files. + + +Updates since v1.5.3 +-------------------- + + * Comes with much improved gitk, with i18n. + + * Comes with git-gui 0.9.2 with i18n. + + * gitk is now merged as a subdirectory of git.git project, in + preparation for its i18n. + + * progress displays from many commands are a lot nicer to the eye. + Transfer commands show throughput data. + + * many commands that pay attention to per-directory .gitignore now do + so lazily, which makes the usual case go much faster. + + * Output processing for '--pretty=format:<user format>' has been + optimized. + + * Rename detection of diff family while detecting exact matches has + been greatly optimized. + + * Rename detection of diff family tries to make more natural looking + pairing. Earlier, if multiple identical rename sources were + found in the preimage, the source used was picked pretty much at random. + + * Value "true" for color.diff and color.status configuration used to + mean "always" (even when the output is not going to a terminal). + This has been corrected to mean the same thing as "auto". + + * "git diff" Porcelain now respects diff.external configuration, which + is another way to specify GIT_EXTERNAL_DIFF. + + * "git diff" can be told to use different prefixes other than + "a/" and "b/" e.g. "git diff --src-prefix=l/ --dst-prefix=k/". + + * "git diff" sometimes did not quote paths with funny + characters properly. + + * "git log" (and any revision traversal commands) misbehaved + when --diff-filter is given but was not asked to actually + produce diff. + + * HTTP proxy can be specified per remote repository using + remote.*.httpproxy configuration, or global http.proxy configuration + variable. + + * Various Perforce importer updates. + + * Example update and post-receive hooks have been improved. + + * Any command that wants to take a commit object name can now use + ":/string" syntax to name a commit. + + * "git reset" is now built-in and its output can be squelched with -q. + + * "git reset --hard" does not make any sense in a bare + repository, but did not error out; fixed. + + * "git send-email" can optionally talk over ssmtp and use SMTP-AUTH. + + * "git rebase" learned --whitespace option. + + * In "git rebase", when you decide not to replay a particular change + after the command stopped with a conflict, you can say "git rebase + --skip" without first running "git reset --hard", as the command now + runs it for you. + + * "git rebase --interactive" mode can now work on detached HEAD. + + * Other minor to serious bugs in "git rebase -i" have been fixed. + + * "git rebase" now detaches head during its operation, so after a + successful "git rebase" operation, the reflog entry branch@{1} for + the current branch points at the commit before the rebase was + started. + + * "git rebase -i" also triggers rerere to help your repeated merges. + + * "git merge" can call the "post-merge" hook. + + * "git pack-objects" can optionally run deltification with multiple + threads. + + * "git archive" can optionally substitute keywords in files marked with + export-subst attribute. + + * "git cherry-pick" made a misguided attempt to repeat the original + command line in the generated log message, when told to cherry-pick a + commit by naming a tag that points at it. It does not anymore. + + * "git for-each-ref" learned %(xxxdate:<date-format>) syntax to show the + various date fields in different formats. + + * "git gc --auto" is a low-impact way to automatically run a variant of + "git repack" that does not lose unreferenced objects (read: safer + than the usual one) after the user accumulates too many loose + objects. + + * "git clean" has been rewritten in C. + + * You need to explicitly set clean.requireForce to "false" to allow + "git clean" without -f to do any damage (lack of the configuration + variable used to mean "do not require -f option to lose untracked + files", but we now use the safer default). + + * The kinds of whitespace errors "git diff" and "git apply" notice (and + fix) can be controlled via 'core.whitespace' configuration variable + and 'whitespace' attribute in .gitattributes file. + + * "git push" learned --dry-run option to show what would happen if a + push is run. + + * "git push" does not update a tracking ref on the local side when the + remote refused to update the corresponding ref. + + * "git push" learned --mirror option. This is to push the local refs + one-to-one to the remote, and deletes refs from the remote that do + not exist anymore in the repository on the pushing side. + + * "git push" can remove a corrupt ref at the remote site with the usual + ":ref" refspec. + + * "git remote" knows --mirror mode. This is to set up configuration to + push into a remote repository to store local branch heads to the same + branch on the remote side, and remove branch heads locally removed + from local repository at the same time. Suitable for pushing into a + back-up repository. + + * "git remote" learned "rm" subcommand. + + * "git cvsserver" can be run via "git shell". Also, "cvs" is + recognized as a synonym for "git cvsserver", so that CVS users + can be switched to git just by changing their login shell. + + * "git cvsserver" acts more like receive-pack by running post-receive + and post-update hooks. + + * "git am" and "git rebase" are far less verbose. + + * "git pull" learned to pass --[no-]ff option to underlying "git + merge". + + * "git pull --rebase" is a different way to integrate what you fetched + into your current branch. + + * "git fast-export" produces data-stream that can be fed to fast-import + to reproduce the history recorded in a git repository. + + * "git add -i" takes pathspecs to limit the set of files to work on. + + * "git add -p" is a short-hand to go directly to the selective patch + subcommand in the interactive command loop and to exit when done. + + * "git add -i" UI has been colorized. The interactive prompt + and menu can be colored by setting color.interactive + configuration. The diff output (including the hunk picker) + are colored with color.diff configuration. + + * "git commit --allow-empty" allows you to create a single-parent + commit that records the same tree as its parent, overriding the usual + safety valve. + + * "git commit --amend" can amend a merge that does not change the tree + from its first parent. + + * "git commit" used to unconditionally strip comment lines that + began with '#' and removed excess blank lines. This behavior has + been made configurable. + + * "git commit" has been rewritten in C. + + * "git stash random-text" does not create a new stash anymore. It was + a UI mistake. Use "git stash save random-text", or "git stash" + (without extra args) for that. + + * "git stash clear extra-text" does not clear the whole stash + anymore. It is tempting to expect "git stash clear stash@{2}" + to drop only a single named stash entry, and it is rude to + discard everything when that is asked (but not provided). + + * "git prune --expire <time>" can exempt young loose objects from + getting pruned. + + * "git branch --contains <commit>" can list branches that are + descendants of a given commit. + + * "git log" learned --early-output option to help interactive GUI + implementations. + + * "git bisect" learned "skip" action to mark untestable commits. + + * "git bisect visualize" learned a shorter synonym "git bisect view". + + * "git bisect visualize" runs "git log" in a non-windowed + environments. It also can be told what command to run (e.g. "git + bisect visualize tig"). + + * "git format-patch" learned "format.numbered" configuration variable + to automatically turn --numbered option on when more than one commits + are formatted. + + * "git ls-files" learned "--exclude-standard" to use the canned set of + exclude files. + + * "git tag -a -f existing" begins the editor session using the existing + annotation message. + + * "git tag -m one -m bar" (multiple -m options) behaves similarly to + "git commit"; the parameters to -m options are formatted as separate + paragraphs. + + * The format "git show" outputs an annotated tag has been updated to + include "Tagger: " and "Date: " lines from the tag itself. Strictly + speaking this is a backward incompatible change, but this is a + reasonable usability fix and people's scripts shouldn't have been + relying on the exact output from "git show" Porcelain anyway. + + * "git cvsimport" did not notice errors from underlying "cvsps" + and produced a corrupt import silently. + + * "git cvsexportcommit" learned -w option to specify and switch to the + CVS working directory. + + * "git checkout" from a subdirectory learned to use "../path" to allow + checking out a path outside the current directory without cd'ing up. + + * "git checkout" from and to detached HEAD leaves a bit more + information in the reflog. + + * "git send-email --dry-run" shows full headers for easier diagnosis. + + * "git merge-ours" is now built-in. + + * "git svn" learned "info" and "show-externals" subcommands. + + * "git svn" run from a subdirectory failed to read settings from the + .git/config. + + * "git svn" learned --use-log-author option, which picks up more + descriptive name from From: and Signed-off-by: lines in the commit + message. + + * "git svn" wasted way too much disk to record revision mappings + between svn and git; a new representation that is much more compact + for this information has been introduced to correct this. + + * "git svn" left temporary index files it used without cleaning them + up; this was corrected. + + * "git status" from a subdirectory now shows relative paths, which + makes copy-and-pasting for git-checkout/git-add/git-rm easier. The + traditional behavior to show the full path relative to the top of + the work tree can be had by setting status.relativepaths + configuration variable to false. + + * "git blame" kept text for each annotated revision in core needlessly; + this has been corrected. + + * "git shortlog" learned to default to HEAD when the standard input is + a terminal and the user did not give any revision parameter. + + * "git shortlog" learned "-e" option to show e-mail addresses as well as + authors' names. + + * "git help" learned "-w" option to show documentation in browsers. + + * In addition there are quite a few internal clean-ups. Notably: + + - many fork/exec have been replaced with run-command API, + brought from the msysgit effort. + + - introduction and more use of the option parser API. + + - enhancement and more use of the strbuf API. + + * Makefile tweaks to support HP-UX is in. + +Fixes since v1.5.3 +------------------ + +All of the fixes in v1.5.3 maintenance series are included in +this release, unless otherwise noted. + +These fixes are only in v1.5.4 and not backported to v1.5.3 maintenance +series. + + * The way "git diff --check" behaves is much more consistent with the way + "git apply --whitespace=warn" works. + + * "git svn" talking with the SVN over HTTP will correctly quote branch + and project names. + + * "git config" did not work correctly on platforms that define + REG_NOMATCH to an even number. + + * Recent versions of AsciiDoc 8 has a change to break our + documentation; a workaround has been implemented. + + * "git diff --color-words" colored context lines in a wrong color. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches new file mode 100644 index 0000000..de08d09 --- /dev/null +++ b/Documentation/SubmittingPatches @@ -0,0 +1,404 @@ +Checklist (and a short version for the impatient): + + Commits: + + - make commits of logical units + - check for unnecessary whitespace with "git diff --check" + before committing + - do not check in commented out code or unneeded files + - provide a meaningful commit message + - the first line of the commit message should be a short + description and should skip the full stop + - if you want your work included in git.git, add a + "Signed-off-by: Your Name <you@example.com>" line to the + commit message (or just use the option "-s" when + committing) to confirm that you agree to the Developer's + Certificate of Origin + - make sure that you have tests for the bug you are fixing + - make sure that the test suite passes after your commit + + Patch: + + - use "git format-patch -M" to create the patch + - do not PGP sign your patch + - do not attach your patch, but read in the mail + body, unless you cannot teach your mailer to + leave the formatting of the patch alone. + - be careful doing cut & paste into your mailer, not to + corrupt whitespaces. + - provide additional information (which is unsuitable for + the commit message) between the "---" and the diffstat + - if you change, add, or remove a command line option or + make some other user interface change, the associated + documentation should be updated as well. + - if your name is not writable in ASCII, make sure that + you send off a message in the correct encoding. + - send the patch to the list (git@vger.kernel.org) and the + maintainer (gitster@pobox.com). If you use + git-send-email(1), please test it first by sending + email to yourself. + +Long version: + +I started reading over the SubmittingPatches document for Linux +kernel, primarily because I wanted to have a document similar to +it for the core GIT to make sure people understand what they are +doing when they write "Signed-off-by" line. + +But the patch submission requirements are a lot more relaxed +here on the technical/contents front, because the core GIT is +thousand times smaller ;-). So here is only the relevant bits. + + +(1) Make separate commits for logically separate changes. + +Unless your patch is really trivial, you should not be sending +out a patch that was generated between your working tree and +your commit head. Instead, always make a commit with complete +commit message and generate a series of patches from your +repository. It is a good discipline. + +Describe the technical detail of the change(s). + +If your description starts to get too long, that's a sign that you +probably need to split up your commit to finer grained pieces. + +Oh, another thing. I am picky about whitespaces. Make sure your +changes do not trigger errors with the sample pre-commit hook shipped +in templates/hooks--pre-commit. To help ensure this does not happen, +run git diff --check on your changes before you commit. + + +(1a) Try to be nice to older C compilers + +We try to support wide range of C compilers to compile +git with. That means that you should not use C99 initializers, even +if a lot of compilers grok it. + +Also, variables have to be declared at the beginning of the block +(you can check this with gcc, using the -Wdeclaration-after-statement +option). + +Another thing: NULL pointers shall be written as NULL, not as 0. + + +(2) Generate your patch using git tools out of your commits. + +git based diff tools (git, Cogito, and StGIT included) generate +unidiff which is the preferred format. + +You do not have to be afraid to use -M option to "git diff" or +"git format-patch", if your patch involves file renames. The +receiving end can handle them just fine. + +Please make sure your patch does not include any extra files +which do not belong in a patch submission. Make sure to review +your patch after generating it, to ensure accuracy. Before +sending out, please make sure it cleanly applies to the "master" +branch head. If you are preparing a work based on "next" branch, +that is fine, but please mark it as such. + + +(3) Sending your patches. + +People on the git mailing list need to be able to read and +comment on the changes you are submitting. It is important for +a developer to be able to "quote" your changes, using standard +e-mail tools, so that they may comment on specific portions of +your code. For this reason, all patches should be submitted +"inline". WARNING: Be wary of your MUAs word-wrap +corrupting your patch. Do not cut-n-paste your patch; you can +lose tabs that way if you are not careful. + +It is a common convention to prefix your subject line with +[PATCH]. This lets people easily distinguish patches from other +e-mail discussions. + +"git format-patch" command follows the best current practice to +format the body of an e-mail message. At the beginning of the +patch should come your commit message, ending with the +Signed-off-by: lines, and a line that consists of three dashes, +followed by the diffstat information and the patch itself. If +you are forwarding a patch from somebody else, optionally, at +the beginning of the e-mail message just before the commit +message starts, you can put a "From: " line to name that person. + +You often want to add additional explanation about the patch, +other than the commit message itself. Place such "cover letter" +material between the three dash lines and the diffstat. + +Do not attach the patch as a MIME attachment, compressed or not. +Do not let your e-mail client send quoted-printable. Do not let +your e-mail client send format=flowed which would destroy +whitespaces in your patches. Many +popular e-mail applications will not always transmit a MIME +attachment as plain text, making it impossible to comment on +your code. A MIME attachment also takes a bit more time to +process. This does not decrease the likelihood of your +MIME-attached change being accepted, but it makes it more likely +that it will be postponed. + +Exception: If your mailer is mangling patches then someone may ask +you to re-send them using MIME, that is OK. + +Do not PGP sign your patch, at least for now. Most likely, your +maintainer or other people on the list would not have your PGP +key and would not bother obtaining it anyway. Your patch is not +judged by who you are; a good patch from an unknown origin has a +far better chance of being accepted than a patch from a known, +respected origin that is done poorly or does incorrect things. + +If you really really really really want to do a PGP signed +patch, format it as "multipart/signed", not a text/plain message +that starts with '-----BEGIN PGP SIGNED MESSAGE-----'. That is +not a text/plain, it's something else. + +Note that your maintainer does not necessarily read everything +on the git mailing list. If your patch is for discussion first, +send it "To:" the mailing list, and optionally "cc:" him. If it +is trivially correct or after the list reached a consensus, send +it "To:" the maintainer and optionally "cc:" the list. + +Also note that your maintainer does not actively involve himself in +maintaining what are in contrib/ hierarchy. When you send fixes and +enhancements to them, do not forget to "cc: " the person who primarily +worked on that hierarchy in contrib/. + + +(4) Sign your work + +To improve tracking of who did what, we've borrowed the +"sign-off" procedure from the Linux kernel project on patches +that are being emailed around. Although core GIT is a lot +smaller project it is a good discipline to follow it. + +The sign-off is a simple line at the end of the explanation for +the patch, which certifies that you wrote it or otherwise have +the right to pass it on as a open-source patch. The rules are +pretty simple: if you can certify the below: + + Developer's Certificate of Origin 1.1 + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I + have the right to submit it under the open source license + indicated in the file; or + + (b) The contribution is based upon previous work that, to the best + of my knowledge, is covered under an appropriate open source + license and I have the right under that license to submit that + work with modifications, whether created in whole or in part + by me, under the same open source license (unless I am + permitted to submit under a different license), as indicated + in the file; or + + (c) The contribution was provided directly to me by some other + person who certified (a), (b) or (c) and I have not modified + it. + + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + +then you just add a line saying + + Signed-off-by: Random J Developer <random@developer.example.org> + +This line can be automatically added by git if you run the git-commit +command with the -s option. + +Some people also put extra tags at the end. They'll just be ignored for +now, but you can do this to mark internal company procedures or just +point out some special detail about the sign-off. + + +------------------------------------------------ +MUA specific hints + +Some of patches I receive or pick up from the list share common +patterns of breakage. Please make sure your MUA is set up +properly not to corrupt whitespaces. Here are two common ones +I have seen: + +* Empty context lines that do not have _any_ whitespace. + +* Non empty context lines that have one extra whitespace at the + beginning. + +One test you could do yourself if your MUA is set up correctly is: + +* Send the patch to yourself, exactly the way you would, except + To: and Cc: lines, which would not contain the list and + maintainer address. + +* Save that patch to a file in UNIX mailbox format. Call it say + a.patch. + +* Try to apply to the tip of the "master" branch from the + git.git public repository: + + $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply + $ git checkout test-apply + $ git reset --hard + $ git am a.patch + +If it does not apply correctly, there can be various reasons. + +* Your patch itself does not apply cleanly. That is _bad_ but + does not have much to do with your MUA. Please rebase the + patch appropriately. + +* Your MUA corrupted your patch; "am" would complain that + the patch does not apply. Look at .dotest/ subdirectory and + see what 'patch' file contains and check for the common + corruption patterns mentioned above. + +* While you are at it, check what are in 'info' and + 'final-commit' files as well. If what is in 'final-commit' is + not exactly what you would want to see in the commit log + message, it is very likely that your maintainer would end up + hand editing the log message when he applies your patch. + Things like "Hi, this is my first patch.\n", if you really + want to put in the patch e-mail, should come after the + three-dash line that signals the end of the commit message. + + +Pine +---- + +(Johannes Schindelin) + +I don't know how many people still use pine, but for those poor +souls it may be good to mention that the quell-flowed-text is +needed for recent versions. + +... the "no-strip-whitespace-before-send" option, too. AFAIK it +was introduced in 4.60. + +(Linus Torvalds) + +And 4.58 needs at least this. + +--- +diff-tree 8326dd8350be64ac7fc805f6563a1d61ad10d32c (from e886a61f76edf5410573e92e38ce22974f9c40f1) +Author: Linus Torvalds <torvalds@g5.osdl.org> +Date: Mon Aug 15 17:23:51 2005 -0700 + + Fix pine whitespace-corruption bug + + There's no excuse for unconditionally removing whitespace from + the pico buffers on close. + +diff --git a/pico/pico.c b/pico/pico.c +--- a/pico/pico.c ++++ b/pico/pico.c +@@ -219,7 +219,9 @@ PICO *pm; + switch(pico_all_done){ /* prepare for/handle final events */ + case COMP_EXIT : /* already confirmed */ + packheader(); ++#if 0 + stripwhitespace(); ++#endif + c |= COMP_EXIT; + break; + + +(Daniel Barkalow) + +> A patch to SubmittingPatches, MUA specific help section for +> users of Pine 4.63 would be very much appreciated. + +Ah, it looks like a recent version changed the default behavior to do the +right thing, and inverted the sense of the configuration option. (Either +that or Gentoo did it.) So you need to set the +"no-strip-whitespace-before-send" option, unless the option you have is +"strip-whitespace-before-send", in which case you should avoid checking +it. + + +Thunderbird +----------- + +(A Large Angry SCM) + +Here are some hints on how to successfully submit patches inline using +Thunderbird. + +This recipe appears to work with the current [*1*] Thunderbird from Suse. + +The following Thunderbird extensions are needed: + AboutConfig 0.5 + http://aboutconfig.mozdev.org/ + External Editor 0.7.2 + http://globs.org/articles.php?lng=en&pg=8 + +1) Prepare the patch as a text file using your method of choice. + +2) Before opening a compose window, use Edit->Account Settings to +uncheck the "Compose messages in HTML format" setting in the +"Composition & Addressing" panel of the account to be used to send the +patch. [*2*] + +3) In the main Thunderbird window, _before_ you open the compose window +for the patch, use Tools->about:config to set the following to the +indicated values: + mailnews.send_plaintext_flowed => false + mailnews.wraplength => 0 + +4) Open a compose window and click the external editor icon. + +5) In the external editor window, read in the patch file and exit the +editor normally. + +6) Back in the compose window: Add whatever other text you wish to the +message, complete the addressing and subject fields, and press send. + +7) Optionally, undo the about:config/account settings changes made in +steps 2 & 3. + + +[Footnotes] +*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse +9.3 professional updates. + +*2* It may be possible to do this with about:config and the following +settings but I haven't tried, yet. + mail.html_compose => false + mail.identity.default.compose_html => false + mail.identity.id?.compose_html => false + + +Gnus +---- + +'|' in the *Summary* buffer can be used to pipe the current +message to an external program, and this is a handy way to drive +"git am". However, if the message is MIME encoded, what is +piped into the program is the representation you see in your +*Article* buffer after unwrapping MIME. This is often not what +you would want for two reasons. It tends to screw up non ASCII +characters (most notably in people's names), and also +whitespaces (fatal in patches). Running 'C-u g' to display the +message in raw form before using '|' to run the pipe can work +this problem around. + + +KMail +----- + +This should help you to submit patches inline using KMail. + +1) Prepare the patch as a text file. + +2) Click on New Mail. + +3) Go under "Options" in the Composer window and be sure that +"Word wrap" is not set. + +4) Use Message -> Insert file... and insert the patch. + +5) Back in the compose window: add whatever other text you wish to the +message, complete the addressing and subject fields, and press send. diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf new file mode 100644 index 0000000..10c1a15 --- /dev/null +++ b/Documentation/asciidoc.conf @@ -0,0 +1,66 @@ +## linkgit: macro +# +# Usage: linkgit:command[manpage-section] +# +# Note, {0} is the manpage section, while {target} is the command. +# +# Show GIT link as: <command>(<section>); if section is defined, else just show +# the command. + +[attributes] +plus=+ +caret=^ +startsb=[ +endsb=] +tilde=~ + +ifdef::backend-docbook[] +[linkgit-inlinemacro] +{0%{target}} +{0#<citerefentry>} +{0#<refentrytitle>{target}</refentrytitle><manvolnum>{0}</manvolnum>} +{0#</citerefentry>} +endif::backend-docbook[] + +ifdef::backend-docbook[] +ifndef::docbook-xsl-172[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +# v1.72 breaks with this because it replaces dots not in roff requests. +[listingblock] +<example><title>{title}</title> +<literallayout> +ifdef::doctype-manpage[] + .ft C +endif::doctype-manpage[] +| +ifdef::doctype-manpage[] + .ft +endif::doctype-manpage[] +</literallayout> +{title#}</example> +endif::docbook-xsl-172[] +endif::backend-docbook[] + +ifdef::doctype-manpage[] +ifdef::backend-docbook[] +[header] +template::[header-declarations] +<refentry> +<refmeta> +<refentrytitle>{mantitle}</refentrytitle> +<manvolnum>{manvolnum}</manvolnum> +<refmiscinfo class="source">Git</refmiscinfo> +<refmiscinfo class="version">{git_version}</refmiscinfo> +<refmiscinfo class="manual">Git Manual</refmiscinfo> +</refmeta> +<refnamediv> + <refname>{manname}</refname> + <refpurpose>{manpurpose}</refpurpose> +</refnamediv> +endif::backend-docbook[] +endif::doctype-manpage[] + +ifdef::backend-xhtml11[] +[linkgit-inlinemacro] +<a href="{target}.html">{target}{0?({0})}</a> +endif::backend-xhtml11[] diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt new file mode 100644 index 0000000..c11bb7d --- /dev/null +++ b/Documentation/blame-options.txt @@ -0,0 +1,87 @@ +-b:: + Show blank SHA-1 for boundary commits. This can also + be controlled via the `blame.blankboundary` config option. + +--root:: + Do not treat root commits as boundaries. This can also be + controlled via the `blame.showroot` config option. + +--show-stats:: + Include additional statistics at the end of blame output. + +-L <start>,<end>:: + Annotate only the given line range. <start> and <end> can take + one of these forms: + + - number ++ +If <start> or <end> is a number, it specifies an +absolute line number (lines count from 1). ++ + +- /regex/ ++ +This form will use the first line matching the given +POSIX regex. If <end> is a regex, it will search +starting at the line given by <start>. ++ + +- +offset or -offset ++ +This is only valid for <end> and will specify a number +of lines before or after the line given by <start>. ++ + +-l:: + Show long rev (Default: off). + +-t:: + Show raw timestamp (Default: off). + +-S <revs-file>:: + Use revs from revs-file instead of calling linkgit:git-rev-list[1]. + +-p, --porcelain:: + Show in a format designed for machine consumption. + +--incremental:: + Show the result incrementally in a format designed for + machine consumption. + +--contents <file>:: + When <rev> is not specified, the command annotates the + changes starting backwards from the working tree copy. + This flag makes the command pretend as if the working + tree copy has the contents of the named file (specify + `-` to make the command read from the standard input). + +-M|<num>|:: + Detect moving lines in the file as well. When a commit + moves a block of lines in a file (e.g. the original file + has A and then B, and the commit changes it to B and + then A), traditional 'blame' algorithm typically blames + the lines that were moved up (i.e. B) to the parent and + assigns blame to the lines that were moved down (i.e. A) + to the child commit. With this option, both groups of lines + are blamed on the parent. ++ +<num> is optional but it is the lower bound on the number of +alphanumeric characters that git must detect as moving +within a file for it to associate those lines with the parent +commit. + +-C|<num>|:: + In addition to `-M`, detect lines copied from other + files that were modified in the same commit. This is + useful when you reorganize your program and move code + around across files. When this option is given twice, + the command looks for copies from all other files in the + parent for the commit that creates the file in addition. ++ +<num> is optional but it is the lower bound on the number of +alphanumeric characters that git must detect as moving +between files for it to associate those lines with the parent +commit. + +-h, --help:: + Show help message. diff --git a/Documentation/build-docdep.perl b/Documentation/build-docdep.perl new file mode 100755 index 0000000..ba4205e --- /dev/null +++ b/Documentation/build-docdep.perl @@ -0,0 +1,46 @@ +#!/usr/bin/perl + +my %include = (); +my %included = (); + +for my $text (<*.txt>) { + open I, '<', $text || die "cannot read: $text"; + while (<I>) { + if (/^include::/) { + chomp; + s/^include::\s*//; + s/\[\]//; + $include{$text}{$_} = 1; + $included{$_} = 1; + } + } + close I; +} + +# Do we care about chained includes??? +my $changed = 1; +while ($changed) { + $changed = 0; + while (my ($text, $included) = each %include) { + for my $i (keys %$included) { + # $text has include::$i; if $i includes $j + # $text indirectly includes $j. + if (exists $include{$i}) { + for my $j (keys %{$include{$i}}) { + if (!exists $include{$text}{$j}) { + $include{$text}{$j} = 1; + $included{$j} = 1; + $changed = 1; + } + } + } + } + } +} + +while (my ($text, $included) = each %include) { + if (! exists $included{$text} && + (my $base = $text) =~ s/\.txt$//) { + print "$base.html $base.xml : ", join(" ", keys %$included), "\n"; + } +} diff --git a/Documentation/callouts.xsl b/Documentation/callouts.xsl new file mode 100644 index 0000000..6a361a2 --- /dev/null +++ b/Documentation/callouts.xsl @@ -0,0 +1,30 @@ +<!-- callout.xsl: converts asciidoc callouts to man page format --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> +<xsl:template match="co"> + <xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:text>.sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/> + <xsl:apply-templates/> + <xsl:text>.br </xsl:text> +</xsl:template> + +<!-- sorry, this is not about callouts, but attempts to work around + spurious .sp at the tail of the line docbook stylesheets seem to add --> +<xsl:template match="simpara"> + <xsl:variable name="content"> + <xsl:apply-templates/> + </xsl:variable> + <xsl:value-of select="normalize-space($content)"/> + <xsl:if test="not(ancestor::authorblurb) and + not(ancestor::personblurb)"> + <xsl:text> </xsl:text> + </xsl:if> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/cat-texi.perl b/Documentation/cat-texi.perl new file mode 100755 index 0000000..e3d8e9f --- /dev/null +++ b/Documentation/cat-texi.perl @@ -0,0 +1,38 @@ +#!/usr/bin/perl -w + +my @menu = (); +my $output = $ARGV[0]; + +open TMP, '>', "$output.tmp"; + +while (<STDIN>) { + next if (/^\\input texinfo/../\@node Top/); + next if (/^\@bye/ || /^\.ft/); + if (s/^\@top (.*)/\@node $1,,,Top/) { + push @menu, $1; + } + s/\(\@pxref{\[URLS\]}\)//; + print TMP; +} +close TMP; + +printf '\input texinfo +@setfilename gitman.info +@documentencoding us-ascii +@node Top,,%s +@top Git Manual Pages +@documentlanguage en +@menu +', $menu[0]; + +for (@menu) { + print "* ${_}::\n"; +} +print "\@end menu\n"; +open TMP, '<', "$output.tmp"; +while (<TMP>) { + print; +} +close TMP; +print "\@bye\n"; +unlink "$output.tmp"; diff --git a/Documentation/cmd-list.perl b/Documentation/cmd-list.perl new file mode 100755 index 0000000..04f9977 --- /dev/null +++ b/Documentation/cmd-list.perl @@ -0,0 +1,74 @@ +#!/usr/bin/perl -w + +use File::Compare qw(compare); + +sub format_one { + my ($out, $nameattr) = @_; + my ($name, $attr) = @$nameattr; + my ($state, $description); + $state = 0; + open I, '<', "$name.txt" or die "No such file $name.txt"; + while (<I>) { + if (/^NAME$/) { + $state = 1; + next; + } + if ($state == 1 && /^----$/) { + $state = 2; + next; + } + next if ($state != 2); + chomp; + $description = $_; + last; + } + close I; + if (!defined $description) { + die "No description found in $name.txt"; + } + if (my ($verify_name, $text) = ($description =~ /^($name) - (.*)/)) { + print $out "linkgit:$name\[1\]::\n\t"; + if ($attr =~ / deprecated /) { + print $out "(deprecated) "; + } + print $out "$text.\n\n"; + } + else { + die "Description does not match $name: $description"; + } +} + +my %cmds = (); +for (sort <>) { + next if /^#/; + + chomp; + my ($name, $cat, $attr) = /^(\S+)\s+(.*?)(?:\s+(.*))?$/; + $attr = '' unless defined $attr; + push @{$cmds{$cat}}, [$name, " $attr "]; +} + +for my $cat (qw(ancillaryinterrogators + ancillarymanipulators + mainporcelain + plumbinginterrogators + plumbingmanipulators + synchingrepositories + foreignscminterface + purehelpers + synchelpers)) { + my $out = "cmds-$cat.txt"; + open O, '>', "$out+" or die "Cannot open output file $out+"; + for (@{$cmds{$cat}}) { + format_one(\*O, $_); + } + close O; + + if (-f "$out" && compare("$out", "$out+") == 0) { + unlink "$out+"; + } + else { + print STDERR "$out\n"; + rename "$out+", "$out"; + } +} diff --git a/Documentation/config.txt b/Documentation/config.txt new file mode 100644 index 0000000..6d8cca4 --- /dev/null +++ b/Documentation/config.txt @@ -0,0 +1,887 @@ +CONFIGURATION FILE +------------------ + +The git configuration file contains a number of variables that affect +the git command's behavior. `.git/config` file for each repository +is used to store the information for that repository, and +`$HOME/.gitconfig` is used to store per user information to give +fallback values for `.git/config` file. The file `/etc/gitconfig` +can be used to store system-wide defaults. + +They can be used by both the git plumbing +and the porcelains. The variables are divided into sections, where +in the fully qualified variable name the variable itself is the last +dot-separated segment and the section name is everything before the last +dot. The variable names are case-insensitive and only alphanumeric +characters are allowed. Some variables may appear multiple times. + +Syntax +~~~~~~ + +The syntax is fairly flexible and permissive; whitespaces are mostly +ignored. The '#' and ';' characters begin comments to the end of line, +blank lines are ignored. + +The file consists of sections and variables. A section begins with +the name of the section in square brackets and continues until the next +section begins. Section names are not case sensitive. Only alphanumeric +characters, '`-`' and '`.`' are allowed in section names. Each variable +must belong to some section, which means that there must be section +header before first setting of a variable. + +Sections can be further divided into subsections. To begin a subsection +put its name in double quotes, separated by space from the section name, +in the section header, like in example below: + +-------- + [section "subsection"] + +-------- + +Subsection names can contain any characters except newline (doublequote +'`"`' and backslash have to be escaped as '`\"`' and '`\\`', +respectively) and are case sensitive. Section header cannot span multiple +lines. Variables may belong directly to a section or to a given subsection. +You can have `[section]` if you have `[section "subsection"]`, but you +don't need to. + +There is also (case insensitive) alternative `[section.subsection]` syntax. +In this syntax subsection names follow the same restrictions as for section +name. + +All the other lines are recognized as setting variables, in the form +'name = value'. If there is no equal sign on the line, the entire line +is taken as 'name' and the variable is recognized as boolean "true". +The variable names are case-insensitive and only alphanumeric +characters and '`-`' are allowed. There can be more than one value +for a given variable; we say then that variable is multivalued. + +Leading and trailing whitespace in a variable value is discarded. +Internal whitespace within a variable value is retained verbatim. + +The values following the equals sign in variable assign are all either +a string, an integer, or a boolean. Boolean values may be given as yes/no, +0/1 or true/false. Case is not significant in boolean values, when +converting value to the canonical form using '--bool' type specifier; +`git-config` will ensure that the output is "true" or "false". + +String values may be entirely or partially enclosed in double quotes. +You need to enclose variable value in double quotes if you want to +preserve leading or trailing whitespace, or if variable value contains +beginning of comment characters (if it contains '#' or ';'). +Double quote '`"`' and backslash '`\`' characters in variable value must +be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'. + +The following escape sequences (beside '`\"`' and '`\\`') are recognized: +'`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB) +and '`\b`' for backspace (BS). No other char escape sequence, nor octal +char sequences are valid. + +Variable value ending in a '`\`' is continued on the next line in the +customary UNIX fashion. + +Some variables may require special value format. + +Example +~~~~~~~ + + # Core variables + [core] + ; Don't trust file modes + filemode = false + + # Our diff algorithm + [diff] + external = "/usr/local/bin/gnu-diff -u" + renames = true + + [branch "devel"] + remote = origin + merge = refs/heads/devel + + # Proxy settings + [core] + gitProxy="ssh" for "kernel.org" + gitProxy=default-proxy ; for the rest + +Variables +~~~~~~~~~ + +Note that this list is non-comprehensive and not necessarily complete. +For command-specific variables, you will find a more detailed description +in the appropriate manual page. You will find a description of non-core +porcelain configuration variables in the respective porcelain documentation. + +core.fileMode:: + If false, the executable bit differences between the index and + the working copy are ignored; useful on broken filesystems like FAT. + See linkgit:git-update-index[1]. True by default. + +core.quotepath:: + The commands that output paths (e.g. `ls-files`, + `diff`), when not given the `-z` option, will quote + "unusual" characters in the pathname by enclosing the + pathname in a double-quote pair and with backslashes the + same way strings in C source code are quoted. If this + variable is set to false, the bytes higher than 0x80 are + not quoted but output as verbatim. Note that double + quote, backslash and control characters are always + quoted without `-z` regardless of the setting of this + variable. + +core.autocrlf:: + If true, makes git convert `CRLF` at the end of lines in text files to + `LF` when reading from the filesystem, and convert in reverse when + writing to the filesystem. The variable can be set to + 'input', in which case the conversion happens only while + reading from the filesystem but files are written out with + `LF` at the end of lines. Currently, which paths to consider + "text" (i.e. be subjected to the autocrlf mechanism) is + decided purely based on the contents. + +core.symlinks:: + If false, symbolic links are checked out as small plain files that + contain the link text. linkgit:git-update-index[1] and + linkgit:git-add[1] will not change the recorded type to regular + file. Useful on filesystems like FAT that do not support + symbolic links. True by default. + +core.gitProxy:: + A "proxy command" to execute (as 'command host port') instead + of establishing direct connection to the remote server when + using the git protocol for fetching. If the variable value is + in the "COMMAND for DOMAIN" format, the command is applied only + on hostnames ending with the specified domain string. This variable + may be set multiple times and is matched in the given order; + the first match wins. ++ +Can be overridden by the 'GIT_PROXY_COMMAND' environment variable +(which always applies universally, without the special "for" +handling). + +core.ignoreStat:: + The working copy files are assumed to stay unchanged until you + mark them otherwise manually - Git will not detect the file changes + by lstat() calls. This is useful on systems where those are very + slow, such as Microsoft Windows. See linkgit:git-update-index[1]. + False by default. + +core.preferSymlinkRefs:: + Instead of the default "symref" format for HEAD + and other symbolic reference files, use symbolic links. + This is sometimes needed to work with old scripts that + expect HEAD to be a symbolic link. + +core.bare:: + If true this repository is assumed to be 'bare' and has no + working directory associated with it. If this is the case a + number of commands that require a working directory will be + disabled, such as linkgit:git-add[1] or linkgit:git-merge[1]. ++ +This setting is automatically guessed by linkgit:git-clone[1] or +linkgit:git-init[1] when the repository was created. By default a +repository that ends in "/.git" is assumed to be not bare (bare = +false), while all other repositories are assumed to be bare (bare += true). + +core.worktree:: + Set the path to the working tree. The value will not be + used in combination with repositories found automatically in + a .git directory (i.e. $GIT_DIR is not set). + This can be overridden by the GIT_WORK_TREE environment + variable and the '--work-tree' command line option. + +core.logAllRefUpdates:: + Enable the reflog. Updates to a ref <ref> is logged to the file + "$GIT_DIR/logs/<ref>", by appending the new and old + SHA1, the date/time and the reason of the update, but + only when the file exists. If this configuration + variable is set to true, missing "$GIT_DIR/logs/<ref>" + file is automatically created for branch heads. ++ +This information can be used to determine what commit +was the tip of a branch "2 days ago". ++ +This value is true by default in a repository that has +a working directory associated with it, and false by +default in a bare repository. + +core.repositoryFormatVersion:: + Internal variable identifying the repository format and layout + version. + +core.sharedRepository:: + When 'group' (or 'true'), the repository is made shareable between + several users in a group (making sure all the files and objects are + group-writable). When 'all' (or 'world' or 'everybody'), the + repository will be readable by all users, additionally to being + group-shareable. When 'umask' (or 'false'), git will use permissions + reported by umask(2). See linkgit:git-init[1]. False by default. + +core.warnAmbiguousRefs:: + If true, git will warn you if the ref name you passed it is ambiguous + and might match multiple refs in the .git/refs/ tree. True by default. + +core.compression:: + An integer -1..9, indicating a default compression level. + -1 is the zlib default. 0 means no compression, + and 1..9 are various speed/size tradeoffs, 9 being slowest. + If set, this provides a default to other compression variables, + such as 'core.loosecompression' and 'pack.compression'. + +core.loosecompression:: + An integer -1..9, indicating the compression level for objects that + are not in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to 1 (best speed). + +core.packedGitWindowSize:: + Number of bytes of a pack file to map into memory in a + single mapping operation. Larger window sizes may allow + your system to process a smaller number of large pack files + more quickly. Smaller window sizes will negatively affect + performance due to increased calls to the operating system's + memory manager, but may improve performance when accessing + a large number of large pack files. ++ +Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32 +MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should +be reasonable for all users/operating systems. You probably do +not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.packedGitLimit:: + Maximum number of bytes to map simultaneously into memory + from pack files. If Git needs to access more than this many + bytes at once to complete an operation it will unmap existing + regions to reclaim virtual address space within the process. ++ +Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms. +This should be reasonable for all users/operating systems, except on +the largest projects. You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.deltaBaseCacheLimit:: + Maximum number of bytes to reserve for caching base objects + that multiple deltafied objects reference. By storing the + entire decompressed base objects in a cache Git is able + to avoid unpacking and decompressing frequently used base + objects multiple times. ++ +Default is 16 MiB on all platforms. This should be reasonable +for all users/operating systems, except on the largest projects. +You probably do not need to adjust this value. ++ +Common unit suffixes of 'k', 'm', or 'g' are supported. + +core.excludesfile:: + In addition to '.gitignore' (per-directory) and + '.git/info/exclude', git looks into this file for patterns + of files which are not meant to be tracked. See + linkgit:gitignore[5]. + +core.editor:: + Commands such as `commit` and `tag` that lets you edit + messages by launching an editor uses the value of this + variable when it is set, and the environment variable + `GIT_EDITOR` is not set. The order of preference is + `GIT_EDITOR` environment, `core.editor`, `VISUAL` and + `EDITOR` environment variables and then finally `vi`. + +core.pager:: + The command that git will use to paginate output. Can be overridden + with the `GIT_PAGER` environment variable. + +core.whitespace:: + A comma separated list of common whitespace problems to + notice. `git diff` will use `color.diff.whitespace` to + highlight them, and `git apply --whitespace=error` will + consider them as errors: ++ +* `trailing-space` treats trailing whitespaces at the end of the line + as an error (enabled by default). +* `space-before-tab` treats a space character that appears immediately + before a tab character in the initial indent part of the line as an + error (enabled by default). +* `indent-with-non-tab` treats a line that is indented with 8 or more + space characters as an error (not enabled by default). + +alias.*:: + Command aliases for the linkgit:git[1] command wrapper - e.g. + after defining "alias.last = cat-file commit HEAD", the invocation + "git last" is equivalent to "git cat-file commit HEAD". To avoid + confusion and troubles with script usage, aliases that + hide existing git commands are ignored. Arguments are split by + spaces, the usual shell quoting and escaping is supported. + quote pair and a backslash can be used to quote them. ++ +If the alias expansion is prefixed with an exclamation point, +it will be treated as a shell command. For example, defining +"alias.new = !gitk --all --not ORIG_HEAD", the invocation +"git new" is equivalent to running the shell command +"gitk --all --not ORIG_HEAD". + +apply.whitespace:: + Tells `git-apply` how to handle whitespaces, in the same way + as the '--whitespace' option. See linkgit:git-apply[1]. + +branch.autosetupmerge:: + Tells `git-branch` and `git-checkout` to setup new branches + so that linkgit:git-pull[1] will appropriately merge from that + remote branch. Note that even if this option is not set, + this behavior can be chosen per-branch using the `--track` + and `--no-track` options. This option defaults to true. + +branch.<name>.remote:: + When in branch <name>, it tells `git fetch` which remote to fetch. + If this option is not given, `git fetch` defaults to remote "origin". + +branch.<name>.merge:: + When in branch <name>, it tells `git fetch` the default + refspec to be marked for merging in FETCH_HEAD. The value is + handled like the remote part of a refspec, and must match a + ref which is fetched from the remote given by + "branch.<name>.remote". + The merge information is used by `git pull` (which at first calls + `git fetch`) to lookup the default branch for merging. Without + this option, `git pull` defaults to merge the first refspec fetched. + Specify multiple values to get an octopus merge. + If you wish to setup `git pull` so that it merges into <name> from + another branch in the local repository, you can point + branch.<name>.merge to the desired branch, and use the special setting + `.` (a period) for branch.<name>.remote. + +branch.<name>.mergeoptions:: + Sets default options for merging into branch <name>. The syntax and + supported options are equal to that of linkgit:git-merge[1], but + option values containing whitespace characters are currently not + supported. + +branch.<name>.rebase:: + When true, rebase the branch <name> on top of the fetched branch, + instead of merging the default branch from the default remote. + *NOTE*: this is a possibly dangerous operation; do *not* use + it unless you understand the implications (see linkgit:git-rebase[1] + for details). + +browser.<tool>.path:: + Override the path for the given tool that may be used to + browse HTML help (see '-w' option in linkgit:git-help[1]) or a + working repository in gitweb (see linkgit:git-instaweb[1]). + +clean.requireForce:: + A boolean to make git-clean do nothing unless given -f + or -n. Defaults to true. + +color.branch:: + A boolean to enable/disable color in the output of + linkgit:git-branch[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. Defaults to false. + +color.branch.<slot>:: + Use customized color for branch coloration. `<slot>` is one of + `current` (the current branch), `local` (a local branch), + `remote` (a tracking branch in refs/remotes/), `plain` (other + refs). ++ +The value for these configuration variables is a list of colors (at most +two) and attributes (at most one), separated by spaces. The colors +accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`, +`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`, +`blink` and `reverse`. The first color given is the foreground; the +second is the background. The position of the attribute, if any, +doesn't matter. + +color.diff:: + When set to `always`, always use colors in patch. + When false (or `never`), never. When set to `true` or `auto`, use + colors only when the output is to the terminal. Defaults to false. + +color.diff.<slot>:: + Use customized color for diff colorization. `<slot>` specifies + which part of the patch to use the specified color, and is one + of `plain` (context text), `meta` (metainformation), `frag` + (hunk header), `old` (removed lines), `new` (added lines), + `commit` (commit headers), or `whitespace` (highlighting + whitespace errors). The values of these variables may be specified as + in color.branch.<slot>. + +color.interactive:: + When set to `always`, always use colors for interactive prompts + and displays (such as those used by "git add --interactive"). + When false (or `never`), never. When set to `true` or `auto`, use + colors only when the output is to the terminal. Defaults to false. + +color.interactive.<slot>:: + Use customized color for `git add --interactive` + output. `<slot>` may be `prompt`, `header`, or `help`, for + three distinct types of normal output from interactive + programs. The values of these variables may be specified as + in color.branch.<slot>. + +color.pager:: + A boolean to enable/disable colored output when the pager is in + use (default is true). + +color.status:: + A boolean to enable/disable color in the output of + linkgit:git-status[1]. May be set to `always`, + `false` (or `never`) or `auto` (or `true`), in which case colors are used + only when the output is to a terminal. Defaults to false. + +color.status.<slot>:: + Use customized color for status colorization. `<slot>` is + one of `header` (the header text of the status message), + `added` or `updated` (files which are added but not committed), + `changed` (files which are changed but not added in the index), + or `untracked` (files which are not tracked by git). The values of + these variables may be specified as in color.branch.<slot>. + +commit.template:: + Specify a file to use as the template for new commit messages. + +diff.autorefreshindex:: + When using `git diff` to compare with work tree + files, do not consider stat-only change as changed. + Instead, silently run `git update-index --refresh` to + update the cached stat information for paths whose + contents in the work tree match the contents in the + index. This option defaults to true. Note that this + affects only `git diff` Porcelain, and not lower level + `diff` commands, such as `git diff-files`. + +diff.external:: + If this config variable is set, diff generation is not + performed using the internal diff machinery, but using the + given command. Note: if you want to use an external diff + program only on a subset of your files, you might want to + use linkgit:gitattributes[5] instead. + +diff.renameLimit:: + The number of files to consider when performing the copy/rename + detection; equivalent to the git diff option '-l'. + +diff.renames:: + Tells git to detect renames. If set to any boolean value, it + will enable basic rename detection. If set to "copies" or + "copy", it will detect copies, as well. + +fetch.unpackLimit:: + If the number of objects fetched over the git native + transfer is below this + limit, then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +format.numbered:: + A boolean which can enable sequence numbers in patch subjects. + Setting this option to "auto" will enable it only if there is + more than one patch. See --numbered option in + linkgit:git-format-patch[1]. + +format.headers:: + Additional email headers to include in a patch to be submitted + by mail. See linkgit:git-format-patch[1]. + +format.suffix:: + The default for format-patch is to output files with the suffix + `.patch`. Use this variable to change that suffix (make sure to + include the dot if you want it). + +gc.aggressiveWindow:: + The window size parameter used in the delta compression + algorithm used by 'git gc --aggressive'. This defaults + to 10. + +gc.auto:: + When there are approximately more than this many loose + objects in the repository, `git gc --auto` will pack them. + Some Porcelain commands use this command to perform a + light-weight garbage collection from time to time. The + default value is 6700. Setting this to 0 disables it. + +gc.autopacklimit:: + When there are more than this many packs that are not + marked with `*.keep` file in the repository, `git gc + --auto` consolidates them into one larger pack. The + default value is 20. Setting this to 0 disables it. + +gc.packrefs:: + `git gc` does not run `git pack-refs` in a bare repository by + default so that older dumb-transport clients can still fetch + from the repository. Setting this to `true` lets `git + gc` to run `git pack-refs`. Setting this to `false` tells + `git gc` never to run `git pack-refs`. The default setting is + `notbare`. Enable it only when you know you do not have to + support such clients. The default setting will change to `true` + at some stage, and setting this to `false` will continue to + prevent `git pack-refs` from being run from `git gc`. + +gc.reflogexpire:: + `git reflog expire` removes reflog entries older than + this time; defaults to 90 days. + +gc.reflogexpireunreachable:: + `git reflog expire` removes reflog entries older than + this time and are not reachable from the current tip; + defaults to 30 days. + +gc.rerereresolved:: + Records of conflicted merge you resolved earlier are + kept for this many days when `git rerere gc` is run. + The default is 60 days. See linkgit:git-rerere[1]. + +gc.rerereunresolved:: + Records of conflicted merge you have not resolved are + kept for this many days when `git rerere gc` is run. + The default is 15 days. See linkgit:git-rerere[1]. + +rerere.enabled:: + Activate recording of resolved conflicts, so that identical + conflict hunks can be resolved automatically, should they + be encountered again. linkgit:git-rerere[1] command is by + default enabled if you create `rr-cache` directory under + `$GIT_DIR`, but can be disabled by setting this option to false. + +gitcvs.enabled:: + Whether the CVS server interface is enabled for this repository. + See linkgit:git-cvsserver[1]. + +gitcvs.logfile:: + Path to a log file where the CVS server interface well... logs + various stuff. See linkgit:git-cvsserver[1]. + +gitcvs.allbinary:: + If true, all files are sent to the client in mode '-kb'. This + causes the client to treat all files as binary files which suppresses + any newline munging it otherwise might do. A work-around for the + fact that there is no way yet to set single files to mode '-kb'. + +gitcvs.dbname:: + Database used by git-cvsserver to cache revision information + derived from the git repository. The exact meaning depends on the + used database driver, for SQLite (which is the default driver) this + is a filename. Supports variable substitution (see + linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`). + Default: '%Ggitcvs.%m.sqlite' + +gitcvs.dbdriver:: + Used Perl DBI driver. You can specify any available driver + for this here, but it might not work. git-cvsserver is tested + with 'DBD::SQLite', reported to work with 'DBD::Pg', and + reported *not* to work with 'DBD::mysql'. Experimental feature. + May not contain double colons (`:`). Default: 'SQLite'. + See linkgit:git-cvsserver[1]. + +gitcvs.dbuser, gitcvs.dbpass:: + Database user and password. Only useful if setting 'gitcvs.dbdriver', + since SQLite has no concept of database users and/or passwords. + 'gitcvs.dbuser' supports variable substitution (see + linkgit:git-cvsserver[1] for details). + +All gitcvs variables except for 'gitcvs.allbinary' can also be +specified as 'gitcvs.<access_method>.<varname>' (where 'access_method' +is one of "ext" and "pserver") to make them apply only for the given +access method. + +help.browser:: + Specify the browser that will be used to display help in the + 'web' format. See linkgit:git-help[1]. + +help.format:: + Override the default help format used by linkgit:git-help[1]. + Values 'man', 'info', 'web' and 'html' are supported. 'man' is + the default. 'web' and 'html' are the same. + +http.proxy:: + Override the HTTP proxy, normally configured using the 'http_proxy' + environment variable (see linkgit:curl[1]). This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.sslVerify:: + Whether to verify the SSL certificate when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment + variable. + +http.sslCert:: + File containing the SSL certificate when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment + variable. + +http.sslKey:: + File containing the SSL private key when fetching or pushing + over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment + variable. + +http.sslCAInfo:: + File containing the certificates to verify the peer with when + fetching or pushing over HTTPS. Can be overridden by the + 'GIT_SSL_CAINFO' environment variable. + +http.sslCAPath:: + Path containing files with the CA certificates to verify the peer + with when fetching or pushing over HTTPS. Can be overridden + by the 'GIT_SSL_CAPATH' environment variable. + +http.maxRequests:: + How many HTTP requests to launch in parallel. Can be overridden + by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. + +http.lowSpeedLimit, http.lowSpeedTime:: + If the HTTP transfer speed is less than 'http.lowSpeedLimit' + for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. + Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and + 'GIT_HTTP_LOW_SPEED_TIME' environment variables. + +http.noEPSV:: + A boolean which disables using of EPSV ftp command by curl. + This can helpful with some "poor" ftp servers which don't + support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + environment variable. Default is false (curl will use EPSV). + +i18n.commitEncoding:: + Character encoding the commit messages are stored in; git itself + does not care per se, but this information is necessary e.g. when + importing commits from emails or in the gitk graphical history + browser (and possibly at other places in the future or in other + porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'. + +i18n.logOutputEncoding:: + Character encoding the commit messages are converted to when + running `git-log` and friends. + +instaweb.browser:: + Specify the program that will be used to browse your working + repository in gitweb. See linkgit:git-instaweb[1]. + +instaweb.httpd:: + The HTTP daemon command-line to start gitweb on your working + repository. See linkgit:git-instaweb[1]. + +instaweb.local:: + If true the web server started by linkgit:git-instaweb[1] will + be bound to the local IP (127.0.0.1). + +instaweb.modulepath:: + The module path for an apache httpd used by linkgit:git-instaweb[1]. + +instaweb.port:: + The port number to bind the gitweb httpd to. See + linkgit:git-instaweb[1]. + +log.showroot:: + If true, the initial commit will be shown as a big creation event. + This is equivalent to a diff against an empty tree. + Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which + normally hide the root commit will now show it. True by default. + +merge.summary:: + Whether to include summaries of merged commits in newly created + merge commit messages. False by default. + +merge.tool:: + Controls which merge resolution program is used by + linkgit:git-mergetool[1]. Valid values are: "kdiff3", "tkdiff", + "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", and "opendiff". + +merge.verbosity:: + Controls the amount of output shown by the recursive merge + strategy. Level 0 outputs nothing except a final error + message if conflicts were detected. Level 1 outputs only + conflicts, 2 outputs conflicts and file changes. Level 5 and + above outputs debugging information. The default is level 2. + Can be overridden by 'GIT_MERGE_VERBOSITY' environment variable. + +merge.<driver>.name:: + Defines a human readable name for a custom low-level + merge driver. See linkgit:gitattributes[5] for details. + +merge.<driver>.driver:: + Defines the command that implements a custom low-level + merge driver. See linkgit:gitattributes[5] for details. + +merge.<driver>.recursive:: + Names a low-level merge driver to be used when + performing an internal merge between common ancestors. + See linkgit:gitattributes[5] for details. + +mergetool.<tool>.path:: + Override the path for the given tool. This is useful in case + your tool is not in the PATH. + +pack.window:: + The size of the window used by linkgit:git-pack-objects[1] when no + window size is given on the command line. Defaults to 10. + +pack.depth:: + The maximum delta depth used by linkgit:git-pack-objects[1] when no + maximum depth is given on the command line. Defaults to 50. + +pack.windowMemory:: + The window memory size limit used by linkgit:git-pack-objects[1] + when no limit is given on the command line. The value can be + suffixed with "k", "m", or "g". Defaults to 0, meaning no + limit. + +pack.compression:: + An integer -1..9, indicating the compression level for objects + in a pack file. -1 is the zlib default. 0 means no + compression, and 1..9 are various speed/size tradeoffs, 9 being + slowest. If not set, defaults to core.compression. If that is + not set, defaults to -1, the zlib default, which is "a default + compromise between speed and compression (currently equivalent + to level 6)." + +pack.deltaCacheSize:: + The maximum memory in bytes used for caching deltas in + linkgit:git-pack-objects[1]. + A value of 0 means no limit. Defaults to 0. + +pack.deltaCacheLimit:: + The maximum size of a delta, that is cached in + linkgit:git-pack-objects[1]. Defaults to 1000. + +pack.threads:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that linkgit:git-pack-objects[1] + be compiled with pthreads otherwise this option is ignored with a + warning. This is meant to reduce packing time on multiprocessor + machines. The required amount of memory for the delta search window + is however multiplied by the number of threads. + +pack.indexVersion:: + Specify the default pack index version. Valid values are 1 for + legacy pack index used by Git versions prior to 1.5.2, and 2 for + the new pack index with capabilities for packs larger than 4 GB + as well as proper protection against the repacking of corrupted + packs. Version 2 is selected and this config option ignored + whenever the corresponding pack is larger than 2 GB. Otherwise + the default is 1. + +pull.octopus:: + The default merge strategy to use when pulling multiple branches + at once. + +pull.twohead:: + The default merge strategy to use when pulling a single branch. + +remote.<name>.url:: + The URL of a remote repository. See linkgit:git-fetch[1] or + linkgit:git-push[1]. + +remote.<name>.proxy:: + For remotes that require curl (http, https and ftp), the URL to + the proxy to use for that remote. Set to the empty string to + disable proxying for that remote. + +remote.<name>.fetch:: + The default set of "refspec" for linkgit:git-fetch[1]. See + linkgit:git-fetch[1]. + +remote.<name>.push:: + The default set of "refspec" for linkgit:git-push[1]. See + linkgit:git-push[1]. + +remote.<name>.skipDefaultUpdate:: + If true, this remote will be skipped by default when updating + using the update subcommand of linkgit:git-remote[1]. + +remote.<name>.receivepack:: + The default program to execute on the remote side when pushing. See + option \--exec of linkgit:git-push[1]. + +remote.<name>.uploadpack:: + The default program to execute on the remote side when fetching. See + option \--exec of linkgit:git-fetch-pack[1]. + +remote.<name>.tagopt:: + Setting this value to --no-tags disables automatic tag following when fetching + from remote <name> + +remotes.<group>:: + The list of remotes which are fetched by "git remote update + <group>". See linkgit:git-remote[1]. + +repack.usedeltabaseoffset:: + Allow linkgit:git-repack[1] to create packs that uses + delta-base offset. Defaults to false. + +show.difftree:: + The default linkgit:git-diff-tree[1] arguments to be used + for linkgit:git-show[1]. + +showbranch.default:: + The default set of branches for linkgit:git-show-branch[1]. + See linkgit:git-show-branch[1]. + +status.relativePaths:: + By default, linkgit:git-status[1] shows paths relative to the + current directory. Setting this variable to `false` shows paths + relative to the repository root (this was the default for git + prior to v1.5.4). + +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) and + linkgit:git-archive[1]. + +user.email:: + Your email address to be recorded in any newly created commits. + Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and + 'EMAIL' environment variables. See linkgit:git-commit-tree[1]. + +user.name:: + Your full name to be recorded in any newly created commits. + Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' + environment variables. See linkgit:git-commit-tree[1]. + +user.signingkey:: + If linkgit:git-tag[1] is not selecting the key you want it to + automatically when creating a signed tag, you can override the + default selection with this variable. This option is passed + unchanged to gpg's --local-user parameter, so you may specify a key + using any method that gpg supports. + +whatchanged.difftree:: + The default linkgit:git-diff-tree[1] arguments to be used + for linkgit:git-whatchanged[1]. + +imap:: + The configuration variables in the 'imap' section are described + in linkgit:git-imap-send[1]. + +receive.unpackLimit:: + If the number of objects received in a push is below this + limit then the objects will be unpacked into loose object + files. However if the number of received objects equals or + exceeds this limit then the received pack will be stored as + a pack, after adding any missing delta bases. Storing the + pack from a push can make the push operation complete faster, + especially on slow filesystems. If not set, the value of + `transfer.unpackLimit` is used instead. + +receive.denyNonFastForwards:: + If set to true, git-receive-pack will deny a ref update which is + not a fast forward. Use this to prevent such an update via a push, + even if that push is forced. This configuration variable is + set when initializing a shared repository. + +transfer.unpackLimit:: + When `fetch.unpackLimit` or `receive.unpackLimit` are + not set, the value of this variable is used instead. + The default value is 100. + +web.browser:: + Specify a web browser that may be used by some commands. + Currently only linkgit:git-instaweb[1] and linkgit:git-help[1] + may use it. diff --git a/Documentation/core-tutorial.txt b/Documentation/core-tutorial.txt new file mode 100644 index 0000000..aa40dfd --- /dev/null +++ b/Documentation/core-tutorial.txt @@ -0,0 +1,1681 @@ +A git core tutorial for developers +================================== + +Introduction +------------ + +This tutorial explains how to use the "core" git programs to set up and +work with a git repository. + +If you just need to use git as a revision control system you may prefer +to start with link:tutorial.html[a tutorial introduction to git] or +link:user-manual.html[the git user manual]. + +However, an understanding of these low-level tools can be helpful if +you want to understand git's internals. + +The core git is often called "plumbing", with the prettier user +interfaces on top of it called "porcelain". You may not want to use the +plumbing directly very often, but it can be good to know what the +plumbing does for when the porcelain isn't flushing. + +[NOTE] +Deeper technical details are often marked as Notes, which you can +skip on your first reading. + + +Creating a git repository +------------------------- + +Creating a new git repository couldn't be easier: all git repositories start +out empty, and the only thing you need to do is find yourself a +subdirectory that you want to use as a working tree - either an empty +one for a totally new project, or an existing working tree that you want +to import into git. + +For our first example, we're going to start a totally new repository from +scratch, with no pre-existing files, and we'll call it `git-tutorial`. +To start up, create a subdirectory for it, change into that +subdirectory, and initialize the git infrastructure with `git-init`: + +------------------------------------------------ +$ mkdir git-tutorial +$ cd git-tutorial +$ git-init +------------------------------------------------ + +to which git will reply + +---------------- +Initialized empty Git repository in .git/ +---------------- + +which is just git's way of saying that you haven't been doing anything +strange, and that it will have created a local `.git` directory setup for +your new project. You will now have a `.git` directory, and you can +inspect that with `ls`. For your new empty project, it should show you +three entries, among other things: + + - a file called `HEAD`, that has `ref: refs/heads/master` in it. + This is similar to a symbolic link and points at + `refs/heads/master` relative to the `HEAD` file. ++ +Don't worry about the fact that the file that the `HEAD` link points to +doesn't even exist yet -- you haven't created the commit that will +start your `HEAD` development branch yet. + + - a subdirectory called `objects`, which will contain all the + objects of your project. You should never have any real reason to + look at the objects directly, but you might want to know that these + objects are what contains all the real 'data' in your repository. + + - a subdirectory called `refs`, which contains references to objects. + +In particular, the `refs` subdirectory will contain two other +subdirectories, named `heads` and `tags` respectively. They do +exactly what their names imply: they contain references to any number +of different 'heads' of development (aka 'branches'), and to any +'tags' that you have created to name specific versions in your +repository. + +One note: the special `master` head is the default branch, which is +why the `.git/HEAD` file was created points to it even if it +doesn't yet exist. Basically, the `HEAD` link is supposed to always +point to the branch you are working on right now, and you always +start out expecting to work on the `master` branch. + +However, this is only a convention, and you can name your branches +anything you want, and don't have to ever even 'have' a `master` +branch. A number of the git tools will assume that `.git/HEAD` is +valid, though. + +[NOTE] +An 'object' is identified by its 160-bit SHA1 hash, aka 'object name', +and a reference to an object is always the 40-byte hex +representation of that SHA1 name. The files in the `refs` +subdirectory are expected to contain these hex references +(usually with a final `\'\n\'` at the end), and you should thus +expect to see a number of 41-byte files containing these +references in these `refs` subdirectories when you actually start +populating your tree. + +[NOTE] +An advanced user may want to take a look at the +link:repository-layout.html[repository layout] document +after finishing this tutorial. + +You have now created your first git repository. Of course, since it's +empty, that's not very useful, so let's start populating it with data. + + +Populating a git repository +--------------------------- + +We'll keep this simple and stupid, so we'll start off with populating a +few trivial files just to get a feel for it. + +Start off with just creating any random files that you want to maintain +in your git repository. We'll start off with a few bad examples, just to +get a feel for how this works: + +------------------------------------------------ +$ echo "Hello World" >hello +$ echo "Silly example" >example +------------------------------------------------ + +you have now created two files in your working tree (aka 'working directory'), +but to actually check in your hard work, you will have to go through two steps: + + - fill in the 'index' file (aka 'cache') with the information about your + working tree state. + + - commit that index file as an object. + +The first step is trivial: when you want to tell git about any changes +to your working tree, you use the `git-update-index` program. That +program normally just takes a list of filenames you want to update, but +to avoid trivial mistakes, it refuses to add new entries to the index +(or remove existing ones) unless you explicitly tell it that you're +adding a new entry with the `\--add` flag (or removing an entry with the +`\--remove`) flag. + +So to populate the index with the two files you just created, you can do + +------------------------------------------------ +$ git-update-index --add hello example +------------------------------------------------ + +and you have now told git to track those two files. + +In fact, as you did that, if you now look into your object directory, +you'll notice that git will have added two new objects to the object +database. If you did exactly the steps above, you should now be able to do + + +---------------- +$ ls .git/objects/??/* +---------------- + +and see two files: + +---------------- +.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238 +.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962 +---------------- + +which correspond with the objects with names of `557db...` and +`f24c7...` respectively. + +If you want to, you can use `git-cat-file` to look at those objects, but +you'll have to use the object name, not the filename of the object: + +---------------- +$ git-cat-file -t 557db03de997c86a4a028e1ebd3a1ceb225be238 +---------------- + +where the `-t` tells `git-cat-file` to tell you what the "type" of the +object is. git will tell you that you have a "blob" object (i.e., just a +regular file), and you can see the contents with + +---------------- +$ git-cat-file "blob" 557db03 +---------------- + +which will print out "Hello World". The object `557db03` is nothing +more than the contents of your file `hello`. + +[NOTE] +Don't confuse that object with the file `hello` itself. The +object is literally just those specific *contents* of the file, and +however much you later change the contents in file `hello`, the object +we just looked at will never change. Objects are immutable. + +[NOTE] +The second example demonstrates that you can +abbreviate the object name to only the first several +hexadecimal digits in most places. + +Anyway, as we mentioned previously, you normally never actually take a +look at the objects themselves, and typing long 40-character hex +names is not something you'd normally want to do. The above digression +was just to show that `git-update-index` did something magical, and +actually saved away the contents of your files into the git object +database. + +Updating the index did something else too: it created a `.git/index` +file. This is the index that describes your current working tree, and +something you should be very aware of. Again, you normally never worry +about the index file itself, but you should be aware of the fact that +you have not actually really "checked in" your files into git so far, +you've only *told* git about them. + +However, since git knows about them, you can now start using some of the +most basic git commands to manipulate the files or look at their status. + +In particular, let's not even check in the two files into git yet, we'll +start off by adding another line to `hello` first: + +------------------------------------------------ +$ echo "It's a new day for git" >>hello +------------------------------------------------ + +and you can now, since you told git about the previous state of `hello`, ask +git what has changed in the tree compared to your old index, using the +`git-diff-files` command: + +------------ +$ git-diff-files +------------ + +Oops. That wasn't very readable. It just spit out its own internal +version of a `diff`, but that internal version really just tells you +that it has noticed that "hello" has been modified, and that the old object +contents it had have been replaced with something else. + +To make it readable, we can tell git-diff-files to output the +differences as a patch, using the `-p` flag: + +------------ +$ git-diff-files -p +diff --git a/hello b/hello +index 557db03..263414f 100644 +--- a/hello ++++ b/hello +@@ -1 +1,2 @@ + Hello World ++It's a new day for git +---- + +i.e. the diff of the change we caused by adding another line to `hello`. + +In other words, `git-diff-files` always shows us the difference between +what is recorded in the index, and what is currently in the working +tree. That's very useful. + +A common shorthand for `git-diff-files -p` is to just write `git +diff`, which will do the same thing. + +------------ +$ git diff +diff --git a/hello b/hello +index 557db03..263414f 100644 +--- a/hello ++++ b/hello +@@ -1 +1,2 @@ + Hello World ++It's a new day for git +------------ + + +Committing git state +-------------------- + +Now, we want to go to the next stage in git, which is to take the files +that git knows about in the index, and commit them as a real tree. We do +that in two phases: creating a 'tree' object, and committing that 'tree' +object as a 'commit' object together with an explanation of what the +tree was all about, along with information of how we came to that state. + +Creating a tree object is trivial, and is done with `git-write-tree`. +There are no options or other input: git-write-tree will take the +current index state, and write an object that describes that whole +index. In other words, we're now tying together all the different +filenames with their contents (and their permissions), and we're +creating the equivalent of a git "directory" object: + +------------------------------------------------ +$ git-write-tree +------------------------------------------------ + +and this will just output the name of the resulting tree, in this case +(if you have done exactly as I've described) it should be + +---------------- +8988da15d077d4829fc51d8544c097def6644dbb +---------------- + +which is another incomprehensible object name. Again, if you want to, +you can use `git-cat-file -t 8988d\...` to see that this time the object +is not a "blob" object, but a "tree" object (you can also use +`git-cat-file` to actually output the raw object contents, but you'll see +mainly a binary mess, so that's less interesting). + +However -- normally you'd never use `git-write-tree` on its own, because +normally you always commit a tree into a commit object using the +`git-commit-tree` command. In fact, it's easier to not actually use +`git-write-tree` on its own at all, but to just pass its result in as an +argument to `git-commit-tree`. + +`git-commit-tree` normally takes several arguments -- it wants to know +what the 'parent' of a commit was, but since this is the first commit +ever in this new repository, and it has no parents, we only need to pass in +the object name of the tree. However, `git-commit-tree` also wants to get a +commit message on its standard input, and it will write out the resulting +object name for the commit to its standard output. + +And this is where we create the `.git/refs/heads/master` file +which is pointed at by `HEAD`. This file is supposed to contain +the reference to the top-of-tree of the master branch, and since +that's exactly what `git-commit-tree` spits out, we can do this +all with a sequence of simple shell commands: + +------------------------------------------------ +$ tree=$(git-write-tree) +$ commit=$(echo 'Initial commit' | git-commit-tree $tree) +$ git-update-ref HEAD $commit +------------------------------------------------ + +In this case this creates a totally new commit that is not related to +anything else. Normally you do this only *once* for a project ever, and +all later commits will be parented on top of an earlier commit. + +Again, normally you'd never actually do this by hand. There is a +helpful script called `git commit` that will do all of this for you. So +you could have just written `git commit` +instead, and it would have done the above magic scripting for you. + + +Making a change +--------------- + +Remember how we did the `git-update-index` on file `hello` and then we +changed `hello` afterward, and could compare the new state of `hello` with the +state we saved in the index file? + +Further, remember how I said that `git-write-tree` writes the contents +of the *index* file to the tree, and thus what we just committed was in +fact the *original* contents of the file `hello`, not the new ones. We did +that on purpose, to show the difference between the index state, and the +state in the working tree, and how they don't have to match, even +when we commit things. + +As before, if we do `git-diff-files -p` in our git-tutorial project, +we'll still see the same difference we saw last time: the index file +hasn't changed by the act of committing anything. However, now that we +have committed something, we can also learn to use a new command: +`git-diff-index`. + +Unlike `git-diff-files`, which showed the difference between the index +file and the working tree, `git-diff-index` shows the differences +between a committed *tree* and either the index file or the working +tree. In other words, `git-diff-index` wants a tree to be diffed +against, and before we did the commit, we couldn't do that, because we +didn't have anything to diff against. + +But now we can do + +---------------- +$ git-diff-index -p HEAD +---------------- + +(where `-p` has the same meaning as it did in `git-diff-files`), and it +will show us the same difference, but for a totally different reason. +Now we're comparing the working tree not against the index file, +but against the tree we just wrote. It just so happens that those two +are obviously the same, so we get the same result. + +Again, because this is a common operation, you can also just shorthand +it with + +---------------- +$ git diff HEAD +---------------- + +which ends up doing the above for you. + +In other words, `git-diff-index` normally compares a tree against the +working tree, but when given the `\--cached` flag, it is told to +instead compare against just the index cache contents, and ignore the +current working tree state entirely. Since we just wrote the index +file to HEAD, doing `git-diff-index \--cached -p HEAD` should thus return +an empty set of differences, and that's exactly what it does. + +[NOTE] +================ +`git-diff-index` really always uses the index for its +comparisons, and saying that it compares a tree against the working +tree is thus not strictly accurate. In particular, the list of +files to compare (the "meta-data") *always* comes from the index file, +regardless of whether the `\--cached` flag is used or not. The `\--cached` +flag really only determines whether the file *contents* to be compared +come from the working tree or not. + +This is not hard to understand, as soon as you realize that git simply +never knows (or cares) about files that it is not told about +explicitly. git will never go *looking* for files to compare, it +expects you to tell it what the files are, and that's what the index +is there for. +================ + +However, our next step is to commit the *change* we did, and again, to +understand what's going on, keep in mind the difference between "working +tree contents", "index file" and "committed tree". We have changes +in the working tree that we want to commit, and we always have to +work through the index file, so the first thing we need to do is to +update the index cache: + +------------------------------------------------ +$ git-update-index hello +------------------------------------------------ + +(note how we didn't need the `\--add` flag this time, since git knew +about the file already). + +Note what happens to the different `git-diff-\*` versions here. After +we've updated `hello` in the index, `git-diff-files -p` now shows no +differences, but `git-diff-index -p HEAD` still *does* show that the +current state is different from the state we committed. In fact, now +`git-diff-index` shows the same difference whether we use the `--cached` +flag or not, since now the index is coherent with the working tree. + +Now, since we've updated `hello` in the index, we can commit the new +version. We could do it by writing the tree by hand again, and +committing the tree (this time we'd have to use the `-p HEAD` flag to +tell commit that the HEAD was the *parent* of the new commit, and that +this wasn't an initial commit any more), but you've done that once +already, so let's just use the helpful script this time: + +------------------------------------------------ +$ git commit +------------------------------------------------ + +which starts an editor for you to write the commit message and tells you +a bit about what you have done. + +Write whatever message you want, and all the lines that start with '#' +will be pruned out, and the rest will be used as the commit message for +the change. If you decide you don't want to commit anything after all at +this point (you can continue to edit things and update the index), you +can just leave an empty message. Otherwise `git commit` will commit +the change for you. + +You've now made your first real git commit. And if you're interested in +looking at what `git commit` really does, feel free to investigate: +it's a few very simple shell scripts to generate the helpful (?) commit +message headers, and a few one-liners that actually do the +commit itself (`git-commit`). + + +Inspecting Changes +------------------ + +While creating changes is useful, it's even more useful if you can tell +later what changed. The most useful command for this is another of the +`diff` family, namely `git-diff-tree`. + +`git-diff-tree` can be given two arbitrary trees, and it will tell you the +differences between them. Perhaps even more commonly, though, you can +give it just a single commit object, and it will figure out the parent +of that commit itself, and show the difference directly. Thus, to get +the same diff that we've already seen several times, we can now do + +---------------- +$ git-diff-tree -p HEAD +---------------- + +(again, `-p` means to show the difference as a human-readable patch), +and it will show what the last commit (in `HEAD`) actually changed. + +[NOTE] +============ +Here is an ASCII art by Jon Loeliger that illustrates how +various diff-\* commands compare things. + + diff-tree + +----+ + | | + | | + V V + +-----------+ + | Object DB | + | Backing | + | Store | + +-----------+ + ^ ^ + | | + | | diff-index --cached + | | + diff-index | V + | +-----------+ + | | Index | + | | "cache" | + | +-----------+ + | ^ + | | + | | diff-files + | | + V V + +-----------+ + | Working | + | Directory | + +-----------+ +============ + +More interestingly, you can also give `git-diff-tree` the `--pretty` flag, +which tells it to also show the commit message and author and date of the +commit, and you can tell it to show a whole series of diffs. +Alternatively, you can tell it to be "silent", and not show the diffs at +all, but just show the actual commit message. + +In fact, together with the `git-rev-list` program (which generates a +list of revisions), `git-diff-tree` ends up being a veritable fount of +changes. A trivial (but very useful) script called `git-whatchanged` is +included with git which does exactly this, and shows a log of recent +activities. + +To see the whole history of our pitiful little git-tutorial project, you +can do + +---------------- +$ git log +---------------- + +which shows just the log messages, or if we want to see the log together +with the associated patches use the more complex (and much more +powerful) + +---------------- +$ git-whatchanged -p --root +---------------- + +and you will see exactly what has changed in the repository over its +short history. + +[NOTE] +The `\--root` flag is a flag to `git-diff-tree` to tell it to +show the initial aka 'root' commit too. Normally you'd probably not +want to see the initial import diff, but since the tutorial project +was started from scratch and is so small, we use it to make the result +a bit more interesting. + +With that, you should now be having some inkling of what git does, and +can explore on your own. + +[NOTE] +Most likely, you are not directly using the core +git Plumbing commands, but using Porcelain such as `git-add`, `git-rm' +and `git-commit'. + + +Tagging a version +----------------- + +In git, there are two kinds of tags, a "light" one, and an "annotated tag". + +A "light" tag is technically nothing more than a branch, except we put +it in the `.git/refs/tags/` subdirectory instead of calling it a `head`. +So the simplest form of tag involves nothing more than + +------------------------------------------------ +$ git tag my-first-tag +------------------------------------------------ + +which just writes the current `HEAD` into the `.git/refs/tags/my-first-tag` +file, after which point you can then use this symbolic name for that +particular state. You can, for example, do + +---------------- +$ git diff my-first-tag +---------------- + +to diff your current state against that tag which at this point will +obviously be an empty diff, but if you continue to develop and commit +stuff, you can use your tag as an "anchor-point" to see what has changed +since you tagged it. + +An "annotated tag" is actually a real git object, and contains not only a +pointer to the state you want to tag, but also a small tag name and +message, along with optionally a PGP signature that says that yes, +you really did +that tag. You create these annotated tags with either the `-a` or +`-s` flag to `git tag`: + +---------------- +$ git tag -s <tagname> +---------------- + +which will sign the current `HEAD` (but you can also give it another +argument that specifies the thing to tag, i.e., you could have tagged the +current `mybranch` point by using `git tag <tagname> mybranch`). + +You normally only do signed tags for major releases or things +like that, while the light-weight tags are useful for any marking you +want to do -- any time you decide that you want to remember a certain +point, just create a private tag for it, and you have a nice symbolic +name for the state at that point. + + +Copying repositories +-------------------- + +git repositories are normally totally self-sufficient and relocatable. +Unlike CVS, for example, there is no separate notion of +"repository" and "working tree". A git repository normally *is* the +working tree, with the local git information hidden in the `.git` +subdirectory. There is nothing else. What you see is what you got. + +[NOTE] +You can tell git to split the git internal information from +the directory that it tracks, but we'll ignore that for now: it's not +how normal projects work, and it's really only meant for special uses. +So the mental model of "the git information is always tied directly to +the working tree that it describes" may not be technically 100% +accurate, but it's a good model for all normal use. + +This has two implications: + + - if you grow bored with the tutorial repository you created (or you've + made a mistake and want to start all over), you can just do simple ++ +---------------- +$ rm -rf git-tutorial +---------------- ++ +and it will be gone. There's no external repository, and there's no +history outside the project you created. + + - if you want to move or duplicate a git repository, you can do so. There + is `git clone` command, but if all you want to do is just to + create a copy of your repository (with all the full history that + went along with it), you can do so with a regular + `cp -a git-tutorial new-git-tutorial`. ++ +Note that when you've moved or copied a git repository, your git index +file (which caches various information, notably some of the "stat" +information for the files involved) will likely need to be refreshed. +So after you do a `cp -a` to create a new copy, you'll want to do ++ +---------------- +$ git-update-index --refresh +---------------- ++ +in the new repository to make sure that the index file is up-to-date. + +Note that the second point is true even across machines. You can +duplicate a remote git repository with *any* regular copy mechanism, be it +`scp`, `rsync` or `wget`. + +When copying a remote repository, you'll want to at a minimum update the +index cache when you do this, and especially with other peoples' +repositories you often want to make sure that the index cache is in some +known state (you don't know *what* they've done and not yet checked in), +so usually you'll precede the `git-update-index` with a + +---------------- +$ git-read-tree --reset HEAD +$ git-update-index --refresh +---------------- + +which will force a total index re-build from the tree pointed to by `HEAD`. +It resets the index contents to `HEAD`, and then the `git-update-index` +makes sure to match up all index entries with the checked-out files. +If the original repository had uncommitted changes in its +working tree, `git-update-index --refresh` notices them and +tells you they need to be updated. + +The above can also be written as simply + +---------------- +$ git reset +---------------- + +and in fact a lot of the common git command combinations can be scripted +with the `git xyz` interfaces. You can learn things by just looking +at what the various git scripts do. For example, `git reset` used to be +the above two lines implemented in `git-reset`, but some things like +`git status` and `git commit` are slightly more complex scripts around +the basic git commands. + +Many (most?) public remote repositories will not contain any of +the checked out files or even an index file, and will *only* contain the +actual core git files. Such a repository usually doesn't even have the +`.git` subdirectory, but has all the git files directly in the +repository. + +To create your own local live copy of such a "raw" git repository, you'd +first create your own subdirectory for the project, and then copy the +raw repository contents into the `.git` directory. For example, to +create your own copy of the git repository, you'd do the following + +---------------- +$ mkdir my-git +$ cd my-git +$ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git +---------------- + +followed by + +---------------- +$ git-read-tree HEAD +---------------- + +to populate the index. However, now you have populated the index, and +you have all the git internal files, but you will notice that you don't +actually have any of the working tree files to work on. To get +those, you'd check them out with + +---------------- +$ git-checkout-index -u -a +---------------- + +where the `-u` flag means that you want the checkout to keep the index +up-to-date (so that you don't have to refresh it afterward), and the +`-a` flag means "check out all files" (if you have a stale copy or an +older version of a checked out tree you may also need to add the `-f` +flag first, to tell git-checkout-index to *force* overwriting of any old +files). + +Again, this can all be simplified with + +---------------- +$ git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git +$ cd my-git +$ git checkout +---------------- + +which will end up doing all of the above for you. + +You have now successfully copied somebody else's (mine) remote +repository, and checked it out. + + +Creating a new branch +--------------------- + +Branches in git are really nothing more than pointers into the git +object database from within the `.git/refs/` subdirectory, and as we +already discussed, the `HEAD` branch is nothing but a symlink to one of +these object pointers. + +You can at any time create a new branch by just picking an arbitrary +point in the project history, and just writing the SHA1 name of that +object into a file under `.git/refs/heads/`. You can use any filename you +want (and indeed, subdirectories), but the convention is that the +"normal" branch is called `master`. That's just a convention, though, +and nothing enforces it. + +To show that as an example, let's go back to the git-tutorial repository we +used earlier, and create a branch in it. You do that by simply just +saying that you want to check out a new branch: + +------------ +$ git checkout -b mybranch +------------ + +will create a new branch based at the current `HEAD` position, and switch +to it. + +[NOTE] +================================================ +If you make the decision to start your new branch at some +other point in the history than the current `HEAD`, you can do so by +just telling `git checkout` what the base of the checkout would be. +In other words, if you have an earlier tag or branch, you'd just do + +------------ +$ git checkout -b mybranch earlier-commit +------------ + +and it would create the new branch `mybranch` at the earlier commit, +and check out the state at that time. +================================================ + +You can always just jump back to your original `master` branch by doing + +------------ +$ git checkout master +------------ + +(or any other branch-name, for that matter) and if you forget which +branch you happen to be on, a simple + +------------ +$ cat .git/HEAD +------------ + +will tell you where it's pointing. To get the list of branches +you have, you can say + +------------ +$ git branch +------------ + +which used to be nothing more than a simple script around `ls .git/refs/heads`. +There will be an asterisk in front of the branch you are currently on. + +Sometimes you may wish to create a new branch _without_ actually +checking it out and switching to it. If so, just use the command + +------------ +$ git branch <branchname> [startingpoint] +------------ + +which will simply _create_ the branch, but will not do anything further. +You can then later -- once you decide that you want to actually develop +on that branch -- switch to that branch with a regular `git checkout` +with the branchname as the argument. + + +Merging two branches +-------------------- + +One of the ideas of having a branch is that you do some (possibly +experimental) work in it, and eventually merge it back to the main +branch. So assuming you created the above `mybranch` that started out +being the same as the original `master` branch, let's make sure we're in +that branch, and do some work there. + +------------------------------------------------ +$ git checkout mybranch +$ echo "Work, work, work" >>hello +$ git commit -m "Some work." -i hello +------------------------------------------------ + +Here, we just added another line to `hello`, and we used a shorthand for +doing both `git-update-index hello` and `git commit` by just giving the +filename directly to `git commit`, with an `-i` flag (it tells +git to 'include' that file in addition to what you have done to +the index file so far when making the commit). The `-m` flag is to give the +commit log message from the command line. + +Now, to make it a bit more interesting, let's assume that somebody else +does some work in the original branch, and simulate that by going back +to the master branch, and editing the same file differently there: + +------------ +$ git checkout master +------------ + +Here, take a moment to look at the contents of `hello`, and notice how they +don't contain the work we just did in `mybranch` -- because that work +hasn't happened in the `master` branch at all. Then do + +------------ +$ echo "Play, play, play" >>hello +$ echo "Lots of fun" >>example +$ git commit -m "Some fun." -i hello example +------------ + +since the master branch is obviously in a much better mood. + +Now, you've got two branches, and you decide that you want to merge the +work done. Before we do that, let's introduce a cool graphical tool that +helps you view what's going on: + +---------------- +$ gitk --all +---------------- + +will show you graphically both of your branches (that's what the `\--all` +means: normally it will just show you your current `HEAD`) and their +histories. You can also see exactly how they came to be from a common +source. + +Anyway, let's exit `gitk` (`^Q` or the File menu), and decide that we want +to merge the work we did on the `mybranch` branch into the `master` +branch (which is currently our `HEAD` too). To do that, there's a nice +script called `git merge`, which wants to know which branches you want +to resolve and what the merge is all about: + +------------ +$ git merge -m "Merge work in mybranch" mybranch +------------ + +where the first argument is going to be used as the commit message if +the merge can be resolved automatically. + +Now, in this case we've intentionally created a situation where the +merge will need to be fixed up by hand, though, so git will do as much +of it as it can automatically (which in this case is just merge the `example` +file, which had no differences in the `mybranch` branch), and say: + +---------------- + Auto-merging hello + CONFLICT (content): Merge conflict in hello + Automatic merge failed; fix up by hand +---------------- + +It tells you that it did an "Automatic merge", which +failed due to conflicts in `hello`. + +Not to worry. It left the (trivial) conflict in `hello` in the same form you +should already be well used to if you've ever used CVS, so let's just +open `hello` in our editor (whatever that may be), and fix it up somehow. +I'd suggest just making it so that `hello` contains all four lines: + +------------ +Hello World +It's a new day for git +Play, play, play +Work, work, work +------------ + +and once you're happy with your manual merge, just do a + +------------ +$ git commit -i hello +------------ + +which will very loudly warn you that you're now committing a merge +(which is correct, so never mind), and you can write a small merge +message about your adventures in git-merge-land. + +After you're done, start up `gitk \--all` to see graphically what the +history looks like. Notice that `mybranch` still exists, and you can +switch to it, and continue to work with it if you want to. The +`mybranch` branch will not contain the merge, but next time you merge it +from the `master` branch, git will know how you merged it, so you'll not +have to do _that_ merge again. + +Another useful tool, especially if you do not always work in X-Window +environment, is `git show-branch`. + +------------------------------------------------ +$ git-show-branch --topo-order --more=1 master mybranch +* [master] Merge work in mybranch + ! [mybranch] Some work. +-- +- [master] Merge work in mybranch +*+ [mybranch] Some work. +* [master^] Some fun. +------------------------------------------------ + +The first two lines indicate that it is showing the two branches +and the first line of the commit log message from their +top-of-the-tree commits, you are currently on `master` branch +(notice the asterisk `\*` character), and the first column for +the later output lines is used to show commits contained in the +`master` branch, and the second column for the `mybranch` +branch. Three commits are shown along with their log messages. +All of them have non blank characters in the first column (`*` +shows an ordinary commit on the current branch, `-` is a merge commit), which +means they are now part of the `master` branch. Only the "Some +work" commit has the plus `+` character in the second column, +because `mybranch` has not been merged to incorporate these +commits from the master branch. The string inside brackets +before the commit log message is a short name you can use to +name the commit. In the above example, 'master' and 'mybranch' +are branch heads. 'master^' is the first parent of 'master' +branch head. Please see 'git-rev-parse' documentation if you +see more complex cases. + +[NOTE] +Without the '--more=1' option, 'git-show-branch' would not output the +'[master^]' commit, as '[mybranch]' commit is a common ancestor of +both 'master' and 'mybranch' tips. Please see 'git-show-branch' +documentation for details. + +[NOTE] +If there were more commits on the 'master' branch after the merge, the +merge commit itself would not be shown by 'git-show-branch' by +default. You would need to provide '--sparse' option to make the +merge commit visible in this case. + +Now, let's pretend you are the one who did all the work in +`mybranch`, and the fruit of your hard work has finally been merged +to the `master` branch. Let's go back to `mybranch`, and run +`git merge` to get the "upstream changes" back to your branch. + +------------ +$ git checkout mybranch +$ git merge -m "Merge upstream changes." master +------------ + +This outputs something like this (the actual commit object names +would be different) + +---------------- +Updating from ae3a2da... to a80b4aa.... +Fast forward + example | 1 + + hello | 1 + + 2 files changed, 2 insertions(+), 0 deletions(-) +---------------- + +Because your branch did not contain anything more than what are +already merged into the `master` branch, the merge operation did +not actually do a merge. Instead, it just updated the top of +the tree of your branch to that of the `master` branch. This is +often called 'fast forward' merge. + +You can run `gitk \--all` again to see how the commit ancestry +looks like, or run `show-branch`, which tells you this. + +------------------------------------------------ +$ git show-branch master mybranch +! [master] Merge work in mybranch + * [mybranch] Merge work in mybranch +-- +-- [master] Merge work in mybranch +------------------------------------------------ + + +Merging external work +--------------------- + +It's usually much more common that you merge with somebody else than +merging with your own branches, so it's worth pointing out that git +makes that very easy too, and in fact, it's not that different from +doing a `git merge`. In fact, a remote merge ends up being nothing +more than "fetch the work from a remote repository into a temporary tag" +followed by a `git merge`. + +Fetching from a remote repository is done by, unsurprisingly, +`git fetch`: + +---------------- +$ git fetch <remote-repository> +---------------- + +One of the following transports can be used to name the +repository to download from: + +Rsync:: + `rsync://remote.machine/path/to/repo.git/` ++ +Rsync transport is usable for both uploading and downloading, +but is completely unaware of what git does, and can produce +unexpected results when you download from the public repository +while the repository owner is uploading into it via `rsync` +transport. Most notably, it could update the files under +`refs/` which holds the object name of the topmost commits +before uploading the files in `objects/` -- the downloader would +obtain head commit object name while that object itself is still +not available in the repository. For this reason, it is +considered deprecated. + +SSH:: + `remote.machine:/path/to/repo.git/` or ++ +`ssh://remote.machine/path/to/repo.git/` ++ +This transport can be used for both uploading and downloading, +and requires you to have a log-in privilege over `ssh` to the +remote machine. It finds out the set of objects the other side +lacks by exchanging the head commits both ends have and +transfers (close to) minimum set of objects. It is by far the +most efficient way to exchange git objects between repositories. + +Local directory:: + `/path/to/repo.git/` ++ +This transport is the same as SSH transport but uses `sh` to run +both ends on the local machine instead of running other end on +the remote machine via `ssh`. + +git Native:: + `git://remote.machine/path/to/repo.git/` ++ +This transport was designed for anonymous downloading. Like SSH +transport, it finds out the set of objects the downstream side +lacks and transfers (close to) minimum set of objects. + +HTTP(S):: + `http://remote.machine/path/to/repo.git/` ++ +Downloader from http and https URL +first obtains the topmost commit object name from the remote site +by looking at the specified refname under `repo.git/refs/` directory, +and then tries to obtain the +commit object by downloading from `repo.git/objects/xx/xxx\...` +using the object name of that commit object. Then it reads the +commit object to find out its parent commits and the associate +tree object; it repeats this process until it gets all the +necessary objects. Because of this behavior, they are +sometimes also called 'commit walkers'. ++ +The 'commit walkers' are sometimes also called 'dumb +transports', because they do not require any git aware smart +server like git Native transport does. Any stock HTTP server +that does not even support directory index would suffice. But +you must prepare your repository with `git-update-server-info` +to help dumb transport downloaders. + +Once you fetch from the remote repository, you `merge` that +with your current branch. + +However -- it's such a common thing to `fetch` and then +immediately `merge`, that it's called `git pull`, and you can +simply do + +---------------- +$ git pull <remote-repository> +---------------- + +and optionally give a branch-name for the remote end as a second +argument. + +[NOTE] +You could do without using any branches at all, by +keeping as many local repositories as you would like to have +branches, and merging between them with `git pull`, just like +you merge between branches. The advantage of this approach is +that it lets you keep a set of files for each `branch` checked +out and you may find it easier to switch back and forth if you +juggle multiple lines of development simultaneously. Of +course, you will pay the price of more disk usage to hold +multiple working trees, but disk space is cheap these days. + +It is likely that you will be pulling from the same remote +repository from time to time. As a short hand, you can store +the remote repository URL in the local repository's config file +like this: + +------------------------------------------------ +$ git config remote.linus.url http://www.kernel.org/pub/scm/git/git.git/ +------------------------------------------------ + +and use the "linus" keyword with `git pull` instead of the full URL. + +Examples. + +. `git pull linus` +. `git pull linus tag v0.99.1` + +the above are equivalent to: + +. `git pull http://www.kernel.org/pub/scm/git/git.git/ HEAD` +. `git pull http://www.kernel.org/pub/scm/git/git.git/ tag v0.99.1` + + +How does the merge work? +------------------------ + +We said this tutorial shows what plumbing does to help you cope +with the porcelain that isn't flushing, but we so far did not +talk about how the merge really works. If you are following +this tutorial the first time, I'd suggest to skip to "Publishing +your work" section and come back here later. + +OK, still with me? To give us an example to look at, let's go +back to the earlier repository with "hello" and "example" file, +and bring ourselves back to the pre-merge state: + +------------ +$ git show-branch --more=2 master mybranch +! [master] Merge work in mybranch + * [mybranch] Merge work in mybranch +-- +-- [master] Merge work in mybranch ++* [master^2] Some work. ++* [master^] Some fun. +------------ + +Remember, before running `git merge`, our `master` head was at +"Some fun." commit, while our `mybranch` head was at "Some +work." commit. + +------------ +$ git checkout mybranch +$ git reset --hard master^2 +$ git checkout master +$ git reset --hard master^ +------------ + +After rewinding, the commit structure should look like this: + +------------ +$ git show-branch +* [master] Some fun. + ! [mybranch] Some work. +-- + + [mybranch] Some work. +* [master] Some fun. +*+ [mybranch^] New day. +------------ + +Now we are ready to experiment with the merge by hand. + +`git merge` command, when merging two branches, uses 3-way merge +algorithm. First, it finds the common ancestor between them. +The command it uses is `git-merge-base`: + +------------ +$ mb=$(git-merge-base HEAD mybranch) +------------ + +The command writes the commit object name of the common ancestor +to the standard output, so we captured its output to a variable, +because we will be using it in the next step. By the way, the common +ancestor commit is the "New day." commit in this case. You can +tell it by: + +------------ +$ git-name-rev $mb +my-first-tag +------------ + +After finding out a common ancestor commit, the second step is +this: + +------------ +$ git-read-tree -m -u $mb HEAD mybranch +------------ + +This is the same `git-read-tree` command we have already seen, +but it takes three trees, unlike previous examples. This reads +the contents of each tree into different 'stage' in the index +file (the first tree goes to stage 1, the second to stage 2, +etc.). After reading three trees into three stages, the paths +that are the same in all three stages are 'collapsed' into stage +0. Also paths that are the same in two of three stages are +collapsed into stage 0, taking the SHA1 from either stage 2 or +stage 3, whichever is different from stage 1 (i.e. only one side +changed from the common ancestor). + +After 'collapsing' operation, paths that are different in three +trees are left in non-zero stages. At this point, you can +inspect the index file with this command: + +------------ +$ git-ls-files --stage +100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example +100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello +100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello +------------ + +In our example of only two files, we did not have unchanged +files so only 'example' resulted in collapsing, but in real-life +large projects, only small number of files change in one commit, +and this 'collapsing' tends to trivially merge most of the paths +fairly quickly, leaving only a handful the real changes in non-zero +stages. + +To look at only non-zero stages, use `\--unmerged` flag: + +------------ +$ git-ls-files --unmerged +100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello +100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello +------------ + +The next step of merging is to merge these three versions of the +file, using 3-way merge. This is done by giving +`git-merge-one-file` command as one of the arguments to +`git-merge-index` command: + +------------ +$ git-merge-index git-merge-one-file hello +Auto-merging hello. +merge: warning: conflicts during merge +ERROR: Merge conflict in hello. +fatal: merge program failed +------------ + +`git-merge-one-file` script is called with parameters to +describe those three versions, and is responsible to leave the +merge results in the working tree. +It is a fairly straightforward shell script, and +eventually calls `merge` program from RCS suite to perform a +file-level 3-way merge. In this case, `merge` detects +conflicts, and the merge result with conflict marks is left in +the working tree.. This can be seen if you run `ls-files +--stage` again at this point: + +------------ +$ git-ls-files --stage +100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example +100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello +100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello +100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello +------------ + +This is the state of the index file and the working file after +`git merge` returns control back to you, leaving the conflicting +merge for you to resolve. Notice that the path `hello` is still +unmerged, and what you see with `git diff` at this point is +differences since stage 2 (i.e. your version). + + +Publishing your work +-------------------- + +So, we can use somebody else's work from a remote repository, but +how can *you* prepare a repository to let other people pull from +it? + +You do your real work in your working tree that has your +primary repository hanging under it as its `.git` subdirectory. +You *could* make that repository accessible remotely and ask +people to pull from it, but in practice that is not the way +things are usually done. A recommended way is to have a public +repository, make it reachable by other people, and when the +changes you made in your primary working tree are in good shape, +update the public repository from it. This is often called +'pushing'. + +[NOTE] +This public repository could further be mirrored, and that is +how git repositories at `kernel.org` are managed. + +Publishing the changes from your local (private) repository to +your remote (public) repository requires a write privilege on +the remote machine. You need to have an SSH account there to +run a single command, `git-receive-pack`. + +First, you need to create an empty repository on the remote +machine that will house your public repository. This empty +repository will be populated and be kept up-to-date by pushing +into it later. Obviously, this repository creation needs to be +done only once. + +[NOTE] +`git push` uses a pair of programs, +`git-send-pack` on your local machine, and `git-receive-pack` +on the remote machine. The communication between the two over +the network internally uses an SSH connection. + +Your private repository's git directory is usually `.git`, but +your public repository is often named after the project name, +i.e. `<project>.git`. Let's create such a public repository for +project `my-git`. After logging into the remote machine, create +an empty directory: + +------------ +$ mkdir my-git.git +------------ + +Then, make that directory into a git repository by running +`git init`, but this time, since its name is not the usual +`.git`, we do things slightly differently: + +------------ +$ GIT_DIR=my-git.git git-init +------------ + +Make sure this directory is available for others you want your +changes to be pulled by via the transport of your choice. Also +you need to make sure that you have the `git-receive-pack` +program on the `$PATH`. + +[NOTE] +Many installations of sshd do not invoke your shell as the login +shell when you directly run programs; what this means is that if +your login shell is `bash`, only `.bashrc` is read and not +`.bash_profile`. As a workaround, make sure `.bashrc` sets up +`$PATH` so that you can run `git-receive-pack` program. + +[NOTE] +If you plan to publish this repository to be accessed over http, +you should do `chmod +x my-git.git/hooks/post-update` at this +point. This makes sure that every time you push into this +repository, `git-update-server-info` is run. + +Your "public repository" is now ready to accept your changes. +Come back to the machine you have your private repository. From +there, run this command: + +------------ +$ git push <public-host>:/path/to/my-git.git master +------------ + +This synchronizes your public repository to match the named +branch head (i.e. `master` in this case) and objects reachable +from them in your current repository. + +As a real example, this is how I update my public git +repository. Kernel.org mirror network takes care of the +propagation to other publicly visible machines: + +------------ +$ git push master.kernel.org:/pub/scm/git/git.git/ +------------ + + +Packing your repository +----------------------- + +Earlier, we saw that one file under `.git/objects/??/` directory +is stored for each git object you create. This representation +is efficient to create atomically and safely, but +not so convenient to transport over the network. Since git objects are +immutable once they are created, there is a way to optimize the +storage by "packing them together". The command + +------------ +$ git repack +------------ + +will do it for you. If you followed the tutorial examples, you +would have accumulated about 17 objects in `.git/objects/??/` +directories by now. `git repack` tells you how many objects it +packed, and stores the packed file in `.git/objects/pack` +directory. + +[NOTE] +You will see two files, `pack-\*.pack` and `pack-\*.idx`, +in `.git/objects/pack` directory. They are closely related to +each other, and if you ever copy them by hand to a different +repository for whatever reason, you should make sure you copy +them together. The former holds all the data from the objects +in the pack, and the latter holds the index for random +access. + +If you are paranoid, running `git-verify-pack` command would +detect if you have a corrupt pack, but do not worry too much. +Our programs are always perfect ;-). + +Once you have packed objects, you do not need to leave the +unpacked objects that are contained in the pack file anymore. + +------------ +$ git prune-packed +------------ + +would remove them for you. + +You can try running `find .git/objects -type f` before and after +you run `git prune-packed` if you are curious. Also `git +count-objects` would tell you how many unpacked objects are in +your repository and how much space they are consuming. + +[NOTE] +`git pull` is slightly cumbersome for HTTP transport, as a +packed repository may contain relatively few objects in a +relatively large pack. If you expect many HTTP pulls from your +public repository you might want to repack & prune often, or +never. + +If you run `git repack` again at this point, it will say +"Nothing to pack". Once you continue your development and +accumulate the changes, running `git repack` again will create a +new pack, that contains objects created since you packed your +repository the last time. We recommend that you pack your project +soon after the initial import (unless you are starting your +project from scratch), and then run `git repack` every once in a +while, depending on how active your project is. + +When a repository is synchronized via `git push` and `git pull` +objects packed in the source repository are usually stored +unpacked in the destination, unless rsync transport is used. +While this allows you to use different packing strategies on +both ends, it also means you may need to repack both +repositories every once in a while. + + +Working with Others +------------------- + +Although git is a truly distributed system, it is often +convenient to organize your project with an informal hierarchy +of developers. Linux kernel development is run this way. There +is a nice illustration (page 17, "Merges to Mainline") in +link:http://www.xenotime.net/linux/mentor/linux-mentoring-2006.pdf[Randy Dunlap's presentation]. + +It should be stressed that this hierarchy is purely *informal*. +There is nothing fundamental in git that enforces the "chain of +patch flow" this hierarchy implies. You do not have to pull +from only one remote repository. + +A recommended workflow for a "project lead" goes like this: + +1. Prepare your primary repository on your local machine. Your + work is done there. + +2. Prepare a public repository accessible to others. ++ +If other people are pulling from your repository over dumb +transport protocols (HTTP), you need to keep this repository +'dumb transport friendly'. After `git init`, +`$GIT_DIR/hooks/post-update` copied from the standard templates +would contain a call to `git-update-server-info` but the +`post-update` hook itself is disabled by default -- enable it +with `chmod +x post-update`. This makes sure `git-update-server-info` +keeps the necessary files up-to-date. + +3. Push into the public repository from your primary + repository. + +4. `git repack` the public repository. This establishes a big + pack that contains the initial set of objects as the + baseline, and possibly `git prune` if the transport + used for pulling from your repository supports packed + repositories. + +5. Keep working in your primary repository. Your changes + include modifications of your own, patches you receive via + e-mails, and merges resulting from pulling the "public" + repositories of your "subsystem maintainers". ++ +You can repack this private repository whenever you feel like. + +6. Push your changes to the public repository, and announce it + to the public. + +7. Every once in a while, "git repack" the public repository. + Go back to step 5. and continue working. + + +A recommended work cycle for a "subsystem maintainer" who works +on that project and has an own "public repository" goes like this: + +1. Prepare your work repository, by `git clone` the public + repository of the "project lead". The URL used for the + initial cloning is stored in the remote.origin.url + configuration variable. + +2. Prepare a public repository accessible to others, just like + the "project lead" person does. + +3. Copy over the packed files from "project lead" public + repository to your public repository, unless the "project + lead" repository lives on the same machine as yours. In the + latter case, you can use `objects/info/alternates` file to + point at the repository you are borrowing from. + +4. Push into the public repository from your primary + repository. Run `git repack`, and possibly `git prune` if the + transport used for pulling from your repository supports + packed repositories. + +5. Keep working in your primary repository. Your changes + include modifications of your own, patches you receive via + e-mails, and merges resulting from pulling the "public" + repositories of your "project lead" and possibly your + "sub-subsystem maintainers". ++ +You can repack this private repository whenever you feel +like. + +6. Push your changes to your public repository, and ask your + "project lead" and possibly your "sub-subsystem + maintainers" to pull from it. + +7. Every once in a while, `git repack` the public repository. + Go back to step 5. and continue working. + + +A recommended work cycle for an "individual developer" who does +not have a "public" repository is somewhat different. It goes +like this: + +1. Prepare your work repository, by `git clone` the public + repository of the "project lead" (or a "subsystem + maintainer", if you work on a subsystem). The URL used for + the initial cloning is stored in the remote.origin.url + configuration variable. + +2. Do your work in your repository on 'master' branch. + +3. Run `git fetch origin` from the public repository of your + upstream every once in a while. This does only the first + half of `git pull` but does not merge. The head of the + public repository is stored in `.git/refs/remotes/origin/master`. + +4. Use `git cherry origin` to see which ones of your patches + were accepted, and/or use `git rebase origin` to port your + unmerged changes forward to the updated upstream. + +5. Use `git format-patch origin` to prepare patches for e-mail + submission to your upstream and send it out. Go back to + step 2. and continue. + + +Working with Others, Shared Repository Style +-------------------------------------------- + +If you are coming from CVS background, the style of cooperation +suggested in the previous section may be new to you. You do not +have to worry. git supports "shared public repository" style of +cooperation you are probably more familiar with as well. + +See link:cvs-migration.html[git for CVS users] for the details. + +Bundling your work together +--------------------------- + +It is likely that you will be working on more than one thing at +a time. It is easy to manage those more-or-less independent tasks +using branches with git. + +We have already seen how branches work previously, +with "fun and work" example using two branches. The idea is the +same if there are more than two branches. Let's say you started +out from "master" head, and have some new code in the "master" +branch, and two independent fixes in the "commit-fix" and +"diff-fix" branches: + +------------ +$ git show-branch +! [commit-fix] Fix commit message normalization. + ! [diff-fix] Fix rename detection. + * [master] Release candidate #1 +--- + + [diff-fix] Fix rename detection. + + [diff-fix~1] Better common substring algorithm. ++ [commit-fix] Fix commit message normalization. + * [master] Release candidate #1 +++* [diff-fix~2] Pretty-print messages. +------------ + +Both fixes are tested well, and at this point, you want to merge +in both of them. You could merge in 'diff-fix' first and then +'commit-fix' next, like this: + +------------ +$ git merge -m "Merge fix in diff-fix" diff-fix +$ git merge -m "Merge fix in commit-fix" commit-fix +------------ + +Which would result in: + +------------ +$ git show-branch +! [commit-fix] Fix commit message normalization. + ! [diff-fix] Fix rename detection. + * [master] Merge fix in commit-fix +--- + - [master] Merge fix in commit-fix ++ * [commit-fix] Fix commit message normalization. + - [master~1] Merge fix in diff-fix + +* [diff-fix] Fix rename detection. + +* [diff-fix~1] Better common substring algorithm. + * [master~2] Release candidate #1 +++* [master~3] Pretty-print messages. +------------ + +However, there is no particular reason to merge in one branch +first and the other next, when what you have are a set of truly +independent changes (if the order mattered, then they are not +independent by definition). You could instead merge those two +branches into the current branch at once. First let's undo what +we just did and start over. We would want to get the master +branch before these two merges by resetting it to 'master~2': + +------------ +$ git reset --hard master~2 +------------ + +You can make sure 'git show-branch' matches the state before +those two 'git merge' you just did. Then, instead of running +two 'git merge' commands in a row, you would merge these two +branch heads (this is known as 'making an Octopus'): + +------------ +$ git merge commit-fix diff-fix +$ git show-branch +! [commit-fix] Fix commit message normalization. + ! [diff-fix] Fix rename detection. + * [master] Octopus merge of branches 'diff-fix' and 'commit-fix' +--- + - [master] Octopus merge of branches 'diff-fix' and 'commit-fix' ++ * [commit-fix] Fix commit message normalization. + +* [diff-fix] Fix rename detection. + +* [diff-fix~1] Better common substring algorithm. + * [master~1] Release candidate #1 +++* [master~2] Pretty-print messages. +------------ + +Note that you should not do Octopus because you can. An octopus +is a valid thing to do and often makes it easier to view the +commit history if you are merging more than two independent +changes at the same time. However, if you have merge conflicts +with any of the branches you are merging in and need to hand +resolve, that is an indication that the development happened in +those branches were not independent after all, and you should +merge two at a time, documenting how you resolved the conflicts, +and the reason why you preferred changes made in one side over +the other. Otherwise it would make the project history harder +to follow, not easier. diff --git a/Documentation/cvs-migration.txt b/Documentation/cvs-migration.txt new file mode 100644 index 0000000..ea98900 --- /dev/null +++ b/Documentation/cvs-migration.txt @@ -0,0 +1,171 @@ +git for CVS users +================= + +Git differs from CVS in that every working tree contains a repository with +a full copy of the project history, and no repository is inherently more +important than any other. However, you can emulate the CVS model by +designating a single shared repository which people can synchronize with; +this document explains how to do that. + +Some basic familiarity with git is required. This +link:tutorial.html[tutorial introduction to git] should be sufficient. + +Developing against a shared repository +-------------------------------------- + +Suppose a shared repository is set up in /pub/repo.git on the host +foo.com. Then as an individual committer you can clone the shared +repository over ssh with: + +------------------------------------------------ +$ git clone foo.com:/pub/repo.git/ my-project +$ cd my-project +------------------------------------------------ + +and hack away. The equivalent of `cvs update` is + +------------------------------------------------ +$ git pull origin +------------------------------------------------ + +which merges in any work that others might have done since the clone +operation. If there are uncommitted changes in your working tree, commit +them first before running git pull. + +[NOTE] +================================ +The `pull` command knows where to get updates from because of certain +configuration variables that were set by the first `git clone` +command; see `git config -l` and the linkgit:git-config[1] man +page for details. +================================ + +You can update the shared repository with your changes by first committing +your changes, and then using the linkgit:git-push[1] command: + +------------------------------------------------ +$ git push origin master +------------------------------------------------ + +to "push" those commits to the shared repository. If someone else has +updated the repository more recently, `git push`, like `cvs commit`, will +complain, in which case you must pull any changes before attempting the +push again. + +In the `git push` command above we specify the name of the remote branch +to update (`master`). If we leave that out, `git push` tries to update +any branches in the remote repository that have the same name as a branch +in the local repository. So the last `push` can be done with either of: + +------------ +$ git push origin +$ git push foo.com:/pub/project.git/ +------------ + +as long as the shared repository does not have any branches +other than `master`. + +Setting Up a Shared Repository +------------------------------ + +We assume you have already created a git repository for your project, +possibly created from scratch or from a tarball (see the +link:tutorial.html[tutorial]), or imported from an already existing CVS +repository (see the next section). + +Assume your existing repo is at /home/alice/myproject. Create a new "bare" +repository (a repository without a working tree) and fetch your project into +it: + +------------------------------------------------ +$ mkdir /pub/my-repo.git +$ cd /pub/my-repo.git +$ git --bare init --shared +$ git --bare fetch /home/alice/myproject master:master +------------------------------------------------ + +Next, give every team member read/write access to this repository. One +easy way to do this is to give all the team members ssh access to the +machine where the repository is hosted. If you don't want to give them a +full shell on the machine, there is a restricted shell which only allows +users to do git pushes and pulls; see linkgit:git-shell[1]. + +Put all the committers in the same group, and make the repository +writable by that group: + +------------------------------------------------ +$ chgrp -R $group /pub/my-repo.git +------------------------------------------------ + +Make sure committers have a umask of at most 027, so that the directories +they create are writable and searchable by other group members. + +Importing a CVS archive +----------------------- + +First, install version 2.1 or higher of cvsps from +link:http://www.cobite.com/cvsps/[http://www.cobite.com/cvsps/] and make +sure it is in your path. Then cd to a checked out CVS working directory +of the project you are interested in and run linkgit:git-cvsimport[1]: + +------------------------------------------- +$ git cvsimport -C <destination> <module> +------------------------------------------- + +This puts a git archive of the named CVS module in the directory +<destination>, which will be created if necessary. + +The import checks out from CVS every revision of every file. Reportedly +cvsimport can average some twenty revisions per second, so for a +medium-sized project this should not take more than a couple of minutes. +Larger projects or remote repositories may take longer. + +The main trunk is stored in the git branch named `origin`, and additional +CVS branches are stored in git branches with the same names. The most +recent version of the main trunk is also left checked out on the `master` +branch, so you can start adding your own changes right away. + +The import is incremental, so if you call it again next month it will +fetch any CVS updates that have been made in the meantime. For this to +work, you must not modify the imported branches; instead, create new +branches for your own changes, and merge in the imported branches as +necessary. + +Advanced Shared Repository Management +------------------------------------- + +Git allows you to specify scripts called "hooks" to be run at certain +points. You can use these, for example, to send all commits to the shared +repository to a mailing list. See link:hooks.html[Hooks used by git]. + +You can enforce finer grained permissions using update hooks. See +link:howto/update-hook-example.txt[Controlling access to branches using +update hooks]. + +Providing CVS Access to a git Repository +---------------------------------------- + +It is also possible to provide true CVS access to a git repository, so +that developers can still use CVS; see linkgit:git-cvsserver[1] for +details. + +Alternative Development Models +------------------------------ + +CVS users are accustomed to giving a group of developers commit access to +a common repository. As we've seen, this is also possible with git. +However, the distributed nature of git allows other development models, +and you may want to first consider whether one of them might be a better +fit for your project. + +For example, you can choose a single person to maintain the project's +primary public repository. Other developers then clone this repository +and each work in their own clone. When they have a series of changes that +they're happy with, they ask the maintainer to pull from the branch +containing the changes. The maintainer reviews their changes and pulls +them into the primary repository, which other developers pull from as +necessary to stay coordinated. The Linux kernel and other projects use +variants of this model. + +With a small group, developers may just pull changes from each other's +repositories without the need for a central maintainer. diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt new file mode 100644 index 0000000..400cbb3 --- /dev/null +++ b/Documentation/diff-format.txt @@ -0,0 +1,147 @@ +The output format from "git-diff-index", "git-diff-tree", +"git-diff-files" and "git diff --raw" are very similar. + +These commands all compare two sets of things; what is +compared differs: + +git-diff-index <tree-ish>:: + compares the <tree-ish> and the files on the filesystem. + +git-diff-index --cached <tree-ish>:: + compares the <tree-ish> and the index. + +git-diff-tree [-r] <tree-ish-1> <tree-ish-2> [<pattern>...]:: + compares the trees named by the two arguments. + +git-diff-files [<pattern>...]:: + compares the index and the files on the filesystem. + + +An output line is formatted this way: + +------------------------------------------------ +in-place edit :100644 100644 bcd1234... 0123456... M file0 +copy-edit :100644 100644 abcd123... 1234567... C68 file1 file2 +rename-edit :100644 100644 abcd123... 1234567... R86 file1 file3 +create :000000 100644 0000000... 1234567... A file4 +delete :100644 000000 1234567... 0000000... D file5 +unmerged :000000 000000 0000000... 0000000... U file6 +------------------------------------------------ + +That is, from the left to the right: + +. a colon. +. mode for "src"; 000000 if creation or unmerged. +. a space. +. mode for "dst"; 000000 if deletion or unmerged. +. a space. +. sha1 for "src"; 0\{40\} if creation or unmerged. +. a space. +. sha1 for "dst"; 0\{40\} if creation, unmerged or "look at work tree". +. a space. +. status, followed by optional "score" number. +. a tab or a NUL when '-z' option is used. +. path for "src" +. a tab or a NUL when '-z' option is used; only exists for C or R. +. path for "dst"; only exists for C or R. +. an LF or a NUL when '-z' option is used, to terminate the record. + +<sha1> is shown as all 0's if a file is new on the filesystem +and it is out of sync with the index. + +Example: + +------------------------------------------------ +:100644 100644 5be4a4...... 000000...... M file.c +------------------------------------------------ + +When `-z` option is not used, TAB, LF, and backslash characters +in pathnames are represented as `\t`, `\n`, and `\\`, +respectively. + +diff format for merges +---------------------- + +"git-diff-tree", "git-diff-files" and "git-diff --raw" +can take '-c' or '--cc' option +to generate diff output also for merge commits. The output differs +from the format described above in the following way: + +. there is a colon for each parent +. there are more "src" modes and "src" sha1 +. status is concatenated status characters for each parent +. no optional "score" number +. single path, only for "dst" + +Example: + +------------------------------------------------ +::100644 100644 100644 fabadb8... cc95eb0... 4866510... MM describe.c +------------------------------------------------ + +Note that 'combined diff' lists only files which were modified from +all parents. + + +include::diff-generate-patch.txt[] + + +other diff formats +------------------ + +The `--summary` option describes newly added, deleted, renamed and +copied files. The `--stat` option adds diffstat(1) graph to the +output. These options can be combined with other options, such as +`-p`, and are meant for human consumption. + +When showing a change that involves a rename or a copy, `--stat` output +formats the pathnames compactly by combining common prefix and suffix of +the pathnames. For example, a change that moves `arch/i386/Makefile` to +`arch/x86/Makefile` while modifying 4 lines will be shown like this: + +------------------------------------ +arch/{i386 => x86}/Makefile | 4 +-- +------------------------------------ + +The `--numstat` option gives the diffstat(1) information but is designed +for easier machine consumption. An entry in `--numstat` output looks +like this: + +---------------------------------------- +1 2 README +3 1 arch/{i386 => x86}/Makefile +---------------------------------------- + +That is, from left to right: + +. the number of added lines; +. a tab; +. the number of deleted lines; +. a tab; +. pathname (possibly with rename/copy information); +. a newline. + +When `-z` output option is in effect, the output is formatted this way: + +---------------------------------------- +1 2 README NUL +3 1 NUL arch/i386/Makefile NUL arch/x86/Makefile NUL +---------------------------------------- + +That is: + +. the number of added lines; +. a tab; +. the number of deleted lines; +. a tab; +. a NUL (only exists if renamed/copied); +. pathname in preimage; +. a NUL (only exists if renamed/copied); +. pathname in postimage (only exists if renamed/copied); +. a NUL. + +The extra `NUL` before the preimage path in renamed case is to allow +scripts that read the output to tell if the current record being read is +a single-path record or a rename/copy record without reading ahead. +After reading added and deleted lines, reading up to `NUL` would yield +the pathname, but if that is `NUL`, the record will show two paths. diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt new file mode 100644 index 0000000..029c5f2 --- /dev/null +++ b/Documentation/diff-generate-patch.txt @@ -0,0 +1,161 @@ +Generating patches with -p +-------------------------- + +When "git-diff-index", "git-diff-tree", or "git-diff-files" are run +with a '-p' option, "git diff" without the '--raw' option, or +"git log" with the "-p" option, they +do not produce the output described above; instead they produce a +patch file. You can customize the creation of such patches via the +GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables. + +What the -p option produces is slightly different from the traditional +diff format. + +1. It is preceded with a "git diff" header, that looks like + this: + + diff --git a/file1 b/file2 ++ +The `a/` and `b/` filenames are the same unless rename/copy is +involved. Especially, even for a creation or a deletion, +`/dev/null` is _not_ used in place of `a/` or `b/` filenames. ++ +When rename/copy is involved, `file1` and `file2` show the +name of the source file of the rename/copy and the name of +the file that rename/copy produces, respectively. + +2. It is followed by one or more extended header lines: + + old mode <mode> + new mode <mode> + deleted file mode <mode> + new file mode <mode> + copy from <path> + copy to <path> + rename from <path> + rename to <path> + similarity index <number> + dissimilarity index <number> + index <hash>..<hash> <mode> + +3. TAB, LF, double quote and backslash characters in pathnames + are represented as `\t`, `\n`, `\"` and `\\`, respectively. + If there is need for such substitution then the whole + pathname is put in double quotes. + +The similarity index is the percentage of unchanged lines, and +the dissimilarity index is the percentage of changed lines. It +is a rounded down integer, followed by a percent sign. The +similarity index value of 100% is thus reserved for two equal +files, while 100% dissimilarity means that no line from the old +file made it into the new one. + + +combined diff format +-------------------- + +"git-diff-tree", "git-diff-files" and "git-diff" can take '-c' or +'--cc' option to produce 'combined diff'. For showing a merge commit +with "git log -p", this is the default format. +A 'combined diff' format looks like this: + +------------ +diff --combined describe.c +index fabadb8,cc95eb0..4866510 +--- a/describe.c ++++ b/describe.c +@@@ -98,20 -98,12 +98,20 @@@ + return (a_date > b_date) ? -1 : (a_date == b_date) ? 0 : 1; + } + +- static void describe(char *arg) + -static void describe(struct commit *cmit, int last_one) +++static void describe(char *arg, int last_one) + { + + unsigned char sha1[20]; + + struct commit *cmit; + struct commit_list *list; + static int initialized = 0; + struct commit_name *n; + + + if (get_sha1(arg, sha1) < 0) + + usage(describe_usage); + + cmit = lookup_commit_reference(sha1); + + if (!cmit) + + usage(describe_usage); + + + if (!initialized) { + initialized = 1; + for_each_ref(get_name); +------------ + +1. It is preceded with a "git diff" header, that looks like + this (when '-c' option is used): + + diff --combined file ++ +or like this (when '--cc' option is used): + + diff --c file + +2. It is followed by one or more extended header lines + (this example shows a merge with two parents): + + index <hash>,<hash>..<hash> + mode <mode>,<mode>..<mode> + new file mode <mode> + deleted file mode <mode>,<mode> ++ +The `mode <mode>,<mode>..<mode>` line appears only if at least one of +the <mode> is different from the rest. Extended headers with +information about detected contents movement (renames and +copying detection) are designed to work with diff of two +<tree-ish> and are not used by combined diff format. + +3. It is followed by two-line from-file/to-file header + + --- a/file + +++ b/file ++ +Similar to two-line header for traditional 'unified' diff +format, `/dev/null` is used to signal created or deleted +files. + +4. Chunk header format is modified to prevent people from + accidentally feeding it to `patch -p1`. Combined diff format + was created for review of merge commit changes, and was not + meant for apply. The change is similar to the change in the + extended 'index' header: + + @@@ <from-file-range> <from-file-range> <to-file-range> @@@ ++ +There are (number of parents + 1) `@` characters in the chunk +header for combined diff format. + +Unlike the traditional 'unified' diff format, which shows two +files A and B with a single column that has `-` (minus -- +appears in A but removed in B), `+` (plus -- missing in A but +added to B), or `" "` (space -- unchanged) prefix, this format +compares two or more files file1, file2,... with one file X, and +shows how X differs from each of fileN. One column for each of +fileN is prepended to the output line to note how X's line is +different from it. + +A `-` character in the column N means that the line appears in +fileN but it does not appear in the result. A `+` character +in the column N means that the line appears in the last file, +and fileN does not have that line (in other words, the line was +added, from the point of view of that parent). + +In the above example output, the function signature was changed +from both files (hence two `-` removals from both file1 and +file2, plus `++` to mean one line that was added does not appear +in either file1 nor file2). Also two other lines are the same +from file1 but do not appear in file2 (hence prefixed with ` +`). + +When shown by `git diff-tree -c`, it compares the parents of a +merge commit with the merge result (i.e. file1..fileN are the +parents). When shown by `git diff-files -c`, it compares the +two unresolved merge parents with the working tree file +(i.e. file1 is stage 2 aka "our version", file2 is stage 3 aka +"their version"). diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt new file mode 100644 index 0000000..8d35cbd --- /dev/null +++ b/Documentation/diff-options.txt @@ -0,0 +1,224 @@ +// Please don't remove this comment as asciidoc behaves badly when +// the first non-empty line is ifdef/ifndef. The symptom is that +// without this comment the <git-diff-core> attribute conditionally +// defined below ends up being defined unconditionally. +// Last checked with asciidoc 7.0.2. + +ifndef::git-format-patch[] +ifndef::git-diff[] +ifndef::git-log[] +:git-diff-core: 1 +endif::git-log[] +endif::git-diff[] +endif::git-format-patch[] + +ifdef::git-format-patch[] +-p:: + Generate patches without diffstat. +endif::git-format-patch[] + +ifndef::git-format-patch[] +-p:: + Generate patch (see section on generating patches). + {git-diff? This is the default.} +endif::git-format-patch[] + +-u:: + Synonym for "-p". + +-U<n>:: + Shorthand for "--unified=<n>". + +--unified=<n>:: + Generate diffs with <n> lines of context instead of + the usual three. Implies "-p". + +--raw:: + Generate the raw format. + {git-diff-core? This is the default.} + +--patch-with-raw:: + Synonym for "-p --raw". + +--stat[=width[,name-width]]:: + Generate a diffstat. You can override the default + output width for 80-column terminal by "--stat=width". + The width of the filename part can be controlled by + giving another width to it separated by a comma. + +--numstat:: + Similar to \--stat, but shows number of added and + deleted lines in decimal notation and pathname without + abbreviation, to make it more machine friendly. For + binary files, outputs two `-` instead of saying + `0 0`. + +--shortstat:: + Output only the last line of the --stat format containing total + number of modified files, as well as number of added and deleted + lines. + +--summary:: + Output a condensed summary of extended header information + such as creations, renames and mode changes. + +--patch-with-stat:: + Synonym for "-p --stat". + {git-format-patch? This is the default.} + +-z:: + NUL-line termination on output. This affects the --raw + output field terminator. Also output from commands such + as "git-log" will be delimited with NUL between commits. + +--name-only:: + Show only names of changed files. + +--name-status:: + Show only names and status of changed files. + +--color:: + Show colored diff. + +--no-color:: + Turn off colored diff, even when the configuration file + gives the default to color output. + +--color-words:: + Show colored word diff, i.e. color words which have changed. + +--no-renames:: + Turn off rename detection, even when the configuration + file gives the default to do so. + +--check:: + Warn if changes introduce trailing whitespace + or an indent that uses a space before a tab. Exits with + non-zero status if problems are found. Not compatible with + --exit-code. + +--full-index:: + Instead of the first handful characters, show full + object name of pre- and post-image blob on the "index" + line when generating a patch format output. + +--binary:: + In addition to --full-index, output "binary diff" that + can be applied with "git apply". + +--abbrev[=<n>]:: + Instead of showing the full 40-byte hexadecimal object + name in diff-raw format output and diff-tree header + lines, show only handful hexdigits prefix. This is + independent of --full-index option above, which controls + the diff-patch output format. Non default number of + digits can be specified with --abbrev=<n>. + +-B:: + Break complete rewrite changes into pairs of delete and create. + +-M:: + Detect renames. + +-C:: + Detect copies as well as renames. See also `--find-copies-harder`. + +--diff-filter=[ACDMRTUXB*]:: + Select only files that are Added (`A`), Copied (`C`), + Deleted (`D`), Modified (`M`), Renamed (`R`), have their + type (mode) changed (`T`), are Unmerged (`U`), are + Unknown (`X`), or have had their pairing Broken (`B`). + Any combination of the filter characters may be used. + When `*` (All-or-none) is added to the combination, all + paths are selected if there is any file that matches + other criteria in the comparison; if there is no file + that matches other criteria, nothing is selected. + +--find-copies-harder:: + For performance reasons, by default, `-C` option finds copies only + if the original file of the copy was modified in the same + changeset. This flag makes the command + inspect unmodified files as candidates for the source of + copy. This is a very expensive operation for large + projects, so use it with caution. Giving more than one + `-C` option has the same effect. + +-l<num>:: + -M and -C options require O(n^2) processing time where n + is the number of potential rename/copy targets. This + option prevents rename/copy detection from running if + the number of rename/copy targets exceeds the specified + number. + +-S<string>:: + Look for differences that contain the change in <string>. + +--pickaxe-all:: + When -S finds a change, show all the changes in that + changeset, not just the files that contain the change + in <string>. + +--pickaxe-regex:: + Make the <string> not a plain string but an extended POSIX + regex to match. + +-O<orderfile>:: + Output the patch in the order specified in the + <orderfile>, which has one shell glob pattern per line. + +-R:: + Swap two inputs; that is, show differences from index or + on-disk file to tree contents. + +--text:: + Treat all files as text. + +-a:: + Shorthand for "--text". + +--ignore-space-at-eol:: + Ignore changes in whitespace at EOL. + +--ignore-space-change:: + Ignore changes in amount of whitespace. This ignores whitespace + at line end, and considers all other sequences of one or + more whitespace characters to be equivalent. + +-b:: + Shorthand for "--ignore-space-change". + +--ignore-all-space:: + Ignore whitespace when comparing lines. This ignores + differences even if one line has whitespace where the other + line has none. + +-w:: + Shorthand for "--ignore-all-space". + +--exit-code:: + Make the program exit with codes similar to diff(1). + That is, it exits with 1 if there were differences and + 0 means no differences. + +--quiet:: + Disable all output of the program. Implies --exit-code. + +--ext-diff:: + Allow an external diff helper to be executed. If you set an + external diff driver with linkgit:gitattributes[5], you need + to use this option with linkgit:git-log[1] and friends. + +--no-ext-diff:: + Disallow external diff drivers. + +--src-prefix=<prefix>:: + Show the given source prefix instead of "a/". + +--dst-prefix=<prefix>:: + Show the given destination prefix instead of "b/". + +--no-prefix:: + Do not show any source or destination prefix. + +For more detailed explanation on these common options, see also +link:diffcore.html[diffcore documentation]. diff --git a/Documentation/diffcore.txt b/Documentation/diffcore.txt new file mode 100644 index 0000000..c6a983a --- /dev/null +++ b/Documentation/diffcore.txt @@ -0,0 +1,271 @@ +Tweaking diff output +==================== +June 2005 + + +Introduction +------------ + +The diff commands git-diff-index, git-diff-files, and git-diff-tree +can be told to manipulate differences they find in +unconventional ways before showing diff(1) output. The manipulation +is collectively called "diffcore transformation". This short note +describes what they are and how to use them to produce diff outputs +that are easier to understand than the conventional kind. + + +The chain of operation +---------------------- + +The git-diff-* family works by first comparing two sets of +files: + + - git-diff-index compares contents of a "tree" object and the + working directory (when '\--cached' flag is not used) or a + "tree" object and the index file (when '\--cached' flag is + used); + + - git-diff-files compares contents of the index file and the + working directory; + + - git-diff-tree compares contents of two "tree" objects; + +In all of these cases, the commands themselves compare +corresponding paths in the two sets of files. The result of +comparison is passed from these commands to what is internally +called "diffcore", in a format similar to what is output when +the -p option is not used. E.g. + +------------------------------------------------ +in-place edit :100644 100644 bcd1234... 0123456... M file0 +create :000000 100644 0000000... 1234567... A file4 +delete :100644 000000 1234567... 0000000... D file5 +unmerged :000000 000000 0000000... 0000000... U file6 +------------------------------------------------ + +The diffcore mechanism is fed a list of such comparison results +(each of which is called "filepair", although at this point each +of them talks about a single file), and transforms such a list +into another list. There are currently 6 such transformations: + +- diffcore-pathspec +- diffcore-break +- diffcore-rename +- diffcore-merge-broken +- diffcore-pickaxe +- diffcore-order + +These are applied in sequence. The set of filepairs git-diff-\* +commands find are used as the input to diffcore-pathspec, and +the output from diffcore-pathspec is used as the input to the +next transformation. The final result is then passed to the +output routine and generates either diff-raw format (see Output +format sections of the manual for git-diff-\* commands) or +diff-patch format. + + +diffcore-pathspec: For Ignoring Files Outside Our Consideration +--------------------------------------------------------------- + +The first transformation in the chain is diffcore-pathspec, and +is controlled by giving the pathname parameters to the +git-diff-* commands on the command line. The pathspec is used +to limit the world diff operates in. It removes the filepairs +outside the specified set of pathnames. E.g. If the input set +of filepairs included: + +------------------------------------------------ +:100644 100644 bcd1234... 0123456... M junkfile +------------------------------------------------ + +but the command invocation was "git-diff-files myfile", then the +junkfile entry would be removed from the list because only "myfile" +is under consideration. + +Implementation note. For performance reasons, git-diff-tree +uses the pathname parameters on the command line to cull set of +filepairs it feeds the diffcore mechanism itself, and does not +use diffcore-pathspec, but the end result is the same. + + +diffcore-break: For Splitting Up "Complete Rewrites" +---------------------------------------------------- + +The second transformation in the chain is diffcore-break, and is +controlled by the -B option to the git-diff-* commands. This is +used to detect a filepair that represents "complete rewrite" and +break such filepair into two filepairs that represent delete and +create. E.g. If the input contained this filepair: + +------------------------------------------------ +:100644 100644 bcd1234... 0123456... M file0 +------------------------------------------------ + +and if it detects that the file "file0" is completely rewritten, +it changes it to: + +------------------------------------------------ +:100644 000000 bcd1234... 0000000... D file0 +:000000 100644 0000000... 0123456... A file0 +------------------------------------------------ + +For the purpose of breaking a filepair, diffcore-break examines +the extent of changes between the contents of the files before +and after modification (i.e. the contents that have "bcd1234..." +and "0123456..." as their SHA1 content ID, in the above +example). The amount of deletion of original contents and +insertion of new material are added together, and if it exceeds +the "break score", the filepair is broken into two. The break +score defaults to 50% of the size of the smaller of the original +and the result (i.e. if the edit shrinks the file, the size of +the result is used; if the edit lengthens the file, the size of +the original is used), and can be customized by giving a number +after "-B" option (e.g. "-B75" to tell it to use 75%). + + +diffcore-rename: For Detection Renames and Copies +------------------------------------------------- + +This transformation is used to detect renames and copies, and is +controlled by the -M option (to detect renames) and the -C option +(to detect copies as well) to the git-diff-* commands. If the +input contained these filepairs: + +------------------------------------------------ +:100644 000000 0123456... 0000000... D fileX +:000000 100644 0000000... 0123456... A file0 +------------------------------------------------ + +and the contents of the deleted file fileX is similar enough to +the contents of the created file file0, then rename detection +merges these filepairs and creates: + +------------------------------------------------ +:100644 100644 0123456... 0123456... R100 fileX file0 +------------------------------------------------ + +When the "-C" option is used, the original contents of modified files, +and deleted files (and also unmodified files, if the +"\--find-copies-harder" option is used) are considered as candidates +of the source files in rename/copy operation. If the input were like +these filepairs, that talk about a modified file fileY and a newly +created file file0: + +------------------------------------------------ +:100644 100644 0123456... 1234567... M fileY +:000000 100644 0000000... bcd3456... A file0 +------------------------------------------------ + +the original contents of fileY and the resulting contents of +file0 are compared, and if they are similar enough, they are +changed to: + +------------------------------------------------ +:100644 100644 0123456... 1234567... M fileY +:100644 100644 0123456... bcd3456... C100 fileY file0 +------------------------------------------------ + +In both rename and copy detection, the same "extent of changes" +algorithm used in diffcore-break is used to determine if two +files are "similar enough", and can be customized to use +a similarity score different from the default of 50% by giving a +number after the "-M" or "-C" option (e.g. "-M8" to tell it to use +8/10 = 80%). + +Note. When the "-C" option is used with `\--find-copies-harder` +option, git-diff-\* commands feed unmodified filepairs to +diffcore mechanism as well as modified ones. This lets the copy +detector consider unmodified files as copy source candidates at +the expense of making it slower. Without `\--find-copies-harder`, +git-diff-\* commands can detect copies only if the file that was +copied happened to have been modified in the same changeset. + + +diffcore-merge-broken: For Putting "Complete Rewrites" Back Together +-------------------------------------------------------------------- + +This transformation is used to merge filepairs broken by +diffcore-break, and not transformed into rename/copy by +diffcore-rename, back into a single modification. This always +runs when diffcore-break is used. + +For the purpose of merging broken filepairs back, it uses a +different "extent of changes" computation from the ones used by +diffcore-break and diffcore-rename. It counts only the deletion +from the original, and does not count insertion. If you removed +only 10 lines from a 100-line document, even if you added 910 +new lines to make a new 1000-line document, you did not do a +complete rewrite. diffcore-break breaks such a case in order to +help diffcore-rename to consider such filepairs as candidate of +rename/copy detection, but if filepairs broken that way were not +matched with other filepairs to create rename/copy, then this +transformation merges them back into the original +"modification". + +The "extent of changes" parameter can be tweaked from the +default 80% (that is, unless more than 80% of the original +material is deleted, the broken pairs are merged back into a +single modification) by giving a second number to -B option, +like these: + +* -B50/60 (give 50% "break score" to diffcore-break, use 60% + for diffcore-merge-broken). + +* -B/60 (the same as above, since diffcore-break defaults to 50%). + +Note that earlier implementation left a broken pair as a separate +creation and deletion patches. This was an unnecessary hack and +the latest implementation always merges all the broken pairs +back into modifications, but the resulting patch output is +formatted differently for easier review in case of such +a complete rewrite by showing the entire contents of old version +prefixed with '-', followed by the entire contents of new +version prefixed with '+'. + + +diffcore-pickaxe: For Detecting Addition/Deletion of Specified String +--------------------------------------------------------------------- + +This transformation is used to find filepairs that represent +changes that touch a specified string, and is controlled by the +-S option and the `\--pickaxe-all` option to the git-diff-* +commands. + +When diffcore-pickaxe is in use, it checks if there are +filepairs whose "original" side has the specified string and +whose "result" side does not. Such a filepair represents "the +string appeared in this changeset". It also checks for the +opposite case that loses the specified string. + +When `\--pickaxe-all` is not in effect, diffcore-pickaxe leaves +only such filepairs that touch the specified string in its +output. When `\--pickaxe-all` is used, diffcore-pickaxe leaves all +filepairs intact if there is such a filepair, or makes the +output empty otherwise. The latter behaviour is designed to +make reviewing of the changes in the context of the whole +changeset easier. + + +diffcore-order: For Sorting the Output Based on Filenames +--------------------------------------------------------- + +This is used to reorder the filepairs according to the user's +(or project's) taste, and is controlled by the -O option to the +git-diff-* commands. + +This takes a text file each of whose lines is a shell glob +pattern. Filepairs that match a glob pattern on an earlier line +in the file are output before ones that match a later line, and +filepairs that do not match any glob pattern are output last. + +As an example, a typical orderfile for the core git probably +would look like this: + +------------------------------------------------ +README +Makefile +Documentation +*.h +*.c +t +------------------------------------------------ diff --git a/Documentation/docbook-xsl.css b/Documentation/docbook-xsl.css new file mode 100644 index 0000000..b878b38 --- /dev/null +++ b/Documentation/docbook-xsl.css @@ -0,0 +1,286 @@ +/* + CSS stylesheet for XHTML produced by DocBook XSL stylesheets. + Tested with XSL stylesheets 1.61.2, 1.67.2 +*/ + +span.strong { + font-weight: bold; +} + +body blockquote { + margin-top: .75em; + line-height: 1.5; + margin-bottom: .75em; +} + +html body { + margin: 1em 5% 1em 5%; + line-height: 1.2; +} + +body div { + margin: 0; +} + +h1, h2, h3, h4, h5, h6, +div.toc p b, +div.list-of-figures p b, +div.list-of-tables p b, +div.abstract p.title +{ + color: #527bbd; + font-family: tahoma, verdana, sans-serif; +} + +div.toc p:first-child, +div.list-of-figures p:first-child, +div.list-of-tables p:first-child, +div.example p.title +{ + margin-bottom: 0.2em; +} + +body h1 { + margin: .0em 0 0 -4%; + line-height: 1.3; + border-bottom: 2px solid silver; +} + +body h2 { + margin: 0.5em 0 0 -4%; + line-height: 1.3; + border-bottom: 2px solid silver; +} + +body h3 { + margin: .8em 0 0 -3%; + line-height: 1.3; +} + +body h4 { + margin: .8em 0 0 -3%; + line-height: 1.3; +} + +body h5 { + margin: .8em 0 0 -2%; + line-height: 1.3; +} + +body h6 { + margin: .8em 0 0 -1%; + line-height: 1.3; +} + +body hr { + border: none; /* Broken on IE6 */ +} +div.footnotes hr { + border: 1px solid silver; +} + +div.navheader th, div.navheader td, div.navfooter td { + font-family: sans-serif; + font-size: 0.9em; + font-weight: bold; + color: #527bbd; +} +div.navheader img, div.navfooter img { + border-style: none; +} +div.navheader a, div.navfooter a { + font-weight: normal; +} +div.navfooter hr { + border: 1px solid silver; +} + +body td { + line-height: 1.2 +} + +body th { + line-height: 1.2; +} + +ol { + line-height: 1.2; +} + +ul, body dir, body menu { + line-height: 1.2; +} + +html { + margin: 0; + padding: 0; +} + +body h1, body h2, body h3, body h4, body h5, body h6 { + margin-left: 0 +} + +body pre { + margin: 0.5em 10% 0.5em 1em; + line-height: 1.0; + color: navy; +} + +tt.literal, code.literal { + color: navy; +} + +div.literallayout p { + padding: 0em; + margin: 0em; +} + +div.literallayout { + font-family: monospace; +# margin: 0.5em 10% 0.5em 1em; + margin: 0em; + color: navy; + border: 1px solid silver; + background: #f4f4f4; + padding: 0.5em; +} + +.programlisting, .screen { + border: 1px solid silver; + background: #f4f4f4; + margin: 0.5em 10% 0.5em 0; + padding: 0.5em 1em; +} + +div.sidebar { + background: #ffffee; + margin: 1.0em 10% 0.5em 0; + padding: 0.5em 1em; + border: 1px solid silver; +} +div.sidebar * { padding: 0; } +div.sidebar div { margin: 0; } +div.sidebar p.title { + font-family: sans-serif; + margin-top: 0.5em; + margin-bottom: 0.2em; +} + +div.bibliomixed { + margin: 0.5em 5% 0.5em 1em; +} + +div.glossary dt { + font-weight: bold; +} +div.glossary dd p { + margin-top: 0.2em; +} + +dl { + margin: .8em 0; + line-height: 1.2; +} + +dt { + margin-top: 0.5em; +} + +dt span.term { + font-style: italic; +} + +div.variablelist dd p { + margin-top: 0; +} + +div.itemizedlist li, div.orderedlist li { + margin-left: -0.8em; + margin-top: 0.5em; +} + +ul, ol { + list-style-position: outside; +} + +div.sidebar ul, div.sidebar ol { + margin-left: 2.8em; +} + +div.itemizedlist p.title, +div.orderedlist p.title, +div.variablelist p.title +{ + margin-bottom: -0.8em; +} + +div.revhistory table { + border-collapse: collapse; + border: none; +} +div.revhistory th { + border: none; + color: #527bbd; + font-family: tahoma, verdana, sans-serif; +} +div.revhistory td { + border: 1px solid silver; +} + +/* Keep TOC and index lines close together. */ +div.toc dl, div.toc dt, +div.list-of-figures dl, div.list-of-figures dt, +div.list-of-tables dl, div.list-of-tables dt, +div.indexdiv dl, div.indexdiv dt +{ + line-height: normal; + margin-top: 0; + margin-bottom: 0; +} + +/* + Table styling does not work because of overriding attributes in + generated HTML. +*/ +div.table table, +div.informaltable table +{ + margin-left: 0; + margin-right: 5%; + margin-bottom: 0.8em; +} +div.informaltable table +{ + margin-top: 0.4em +} +div.table thead, +div.table tfoot, +div.table tbody, +div.informaltable thead, +div.informaltable tfoot, +div.informaltable tbody +{ + /* No effect in IE6. */ + border-top: 2px solid #527bbd; + border-bottom: 2px solid #527bbd; +} +div.table thead, div.table tfoot, +div.informaltable thead, div.informaltable tfoot +{ + font-weight: bold; +} + +div.mediaobject img { + border: 1px solid silver; + margin-bottom: 0.8em; +} +div.figure p.title, +div.table p.title +{ + margin-top: 1em; + margin-bottom: 0.4em; +} + +@media print { + div.navheader, div.navfooter { display: none; } +} diff --git a/Documentation/docbook.xsl b/Documentation/docbook.xsl new file mode 100644 index 0000000..9a6912c --- /dev/null +++ b/Documentation/docbook.xsl @@ -0,0 +1,5 @@ +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version='1.0'> + <xsl:import href="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl"/> + <xsl:output method="html" encoding="UTF-8" indent="no" /> +</xsl:stylesheet> diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt new file mode 100644 index 0000000..fdbd15a --- /dev/null +++ b/Documentation/everyday.txt @@ -0,0 +1,458 @@ +Everyday GIT With 20 Commands Or So +=================================== + +<<Basic Repository>> commands are needed by people who have a +repository --- that is everybody, because every working tree of +git is a repository. + +In addition, <<Individual Developer (Standalone)>> commands are +essential for anybody who makes a commit, even for somebody who +works alone. + +If you work with other people, you will need commands listed in +the <<Individual Developer (Participant)>> section as well. + +People who play the <<Integrator>> role need to learn some more +commands in addition to the above. + +<<Repository Administration>> commands are for system +administrators who are responsible for the care and feeding +of git repositories. + + +Basic Repository[[Basic Repository]] +------------------------------------ + +Everybody uses these commands to maintain git repositories. + + * linkgit:git-init[1] or linkgit:git-clone[1] to create a + new repository. + + * linkgit:git-fsck[1] to check the repository for errors. + + * linkgit:git-gc[1] to do common housekeeping tasks such as + repack and prune. + +Examples +~~~~~~~~ + +Check health and remove cruft.:: ++ +------------ +$ git fsck <1> +$ git count-objects <2> +$ git gc <3> +------------ ++ +<1> running without `\--full` is usually cheap and assures the +repository health reasonably well. +<2> check how many loose objects there are and how much +disk space is wasted by not repacking. +<3> repacks the local repository and performs other housekeeping tasks. Running +without `--prune` is a safe operation even while other ones are in progress. + +Repack a small project into single pack.:: ++ +------------ +$ git gc <1> +$ git gc --prune +------------ ++ +<1> pack all the objects reachable from the refs into one pack, +then remove the other packs. + + +Individual Developer (Standalone)[[Individual Developer (Standalone)]] +---------------------------------------------------------------------- + +A standalone individual developer does not exchange patches with +other people, and works alone in a single repository, using the +following commands. + + * linkgit:git-show-branch[1] to see where you are. + + * linkgit:git-log[1] to see what happened. + + * linkgit:git-checkout[1] and linkgit:git-branch[1] to switch + branches. + + * linkgit:git-add[1] to manage the index file. + + * linkgit:git-diff[1] and linkgit:git-status[1] to see what + you are in the middle of doing. + + * linkgit:git-commit[1] to advance the current branch. + + * linkgit:git-reset[1] and linkgit:git-checkout[1] (with + pathname parameters) to undo changes. + + * linkgit:git-merge[1] to merge between local branches. + + * linkgit:git-rebase[1] to maintain topic branches. + + * linkgit:git-tag[1] to mark known point. + +Examples +~~~~~~~~ + +Use a tarball as a starting point for a new repository.:: ++ +------------ +$ tar zxf frotz.tar.gz +$ cd frotz +$ git-init +$ git add . <1> +$ git commit -m "import of frotz source tree." +$ git tag v2.43 <2> +------------ ++ +<1> add everything under the current directory. +<2> make a lightweight, unannotated tag. + +Create a topic branch and develop.:: ++ +------------ +$ git checkout -b alsa-audio <1> +$ edit/compile/test +$ git checkout -- curses/ux_audio_oss.c <2> +$ git add curses/ux_audio_alsa.c <3> +$ edit/compile/test +$ git diff HEAD <4> +$ git commit -a -s <5> +$ edit/compile/test +$ git reset --soft HEAD^ <6> +$ edit/compile/test +$ git diff ORIG_HEAD <7> +$ git commit -a -c ORIG_HEAD <8> +$ git checkout master <9> +$ git merge alsa-audio <10> +$ git log --since='3 days ago' <11> +$ git log v2.43.. curses/ <12> +------------ ++ +<1> create a new topic branch. +<2> revert your botched changes in `curses/ux_audio_oss.c`. +<3> you need to tell git if you added a new file; removal and +modification will be caught if you do `git commit -a` later. +<4> to see what changes you are committing. +<5> commit everything as you have tested, with your sign-off. +<6> take the last commit back, keeping what is in the working tree. +<7> look at the changes since the premature commit we took back. +<8> redo the commit undone in the previous step, using the message +you originally wrote. +<9> switch to the master branch. +<10> merge a topic branch into your master branch. +<11> review commit logs; other forms to limit output can be +combined and include `\--max-count=10` (show 10 commits), +`\--until=2005-12-10`, etc. +<12> view only the changes that touch what's in `curses/` +directory, since `v2.43` tag. + + +Individual Developer (Participant)[[Individual Developer (Participant)]] +------------------------------------------------------------------------ + +A developer working as a participant in a group project needs to +learn how to communicate with others, and uses these commands in +addition to the ones needed by a standalone developer. + + * linkgit:git-clone[1] from the upstream to prime your local + repository. + + * linkgit:git-pull[1] and linkgit:git-fetch[1] from "origin" + to keep up-to-date with the upstream. + + * linkgit:git-push[1] to shared repository, if you adopt CVS + style shared repository workflow. + + * linkgit:git-format-patch[1] to prepare e-mail submission, if + you adopt Linux kernel-style public forum workflow. + +Examples +~~~~~~~~ + +Clone the upstream and work on it. Feed changes to upstream.:: ++ +------------ +$ git clone git://git.kernel.org/pub/scm/.../torvalds/linux-2.6 my2.6 +$ cd my2.6 +$ edit/compile/test; git commit -a -s <1> +$ git format-patch origin <2> +$ git pull <3> +$ git log -p ORIG_HEAD.. arch/i386 include/asm-i386 <4> +$ git pull git://git.kernel.org/pub/.../jgarzik/libata-dev.git ALL <5> +$ git reset --hard ORIG_HEAD <6> +$ git gc --prune <7> +$ git fetch --tags <8> +------------ ++ +<1> repeat as needed. +<2> extract patches from your branch for e-mail submission. +<3> `git pull` fetches from `origin` by default and merges into the +current branch. +<4> immediately after pulling, look at the changes done upstream +since last time we checked, only in the +area we are interested in. +<5> fetch from a specific branch from a specific repository and merge. +<6> revert the pull. +<7> garbage collect leftover objects from reverted pull. +<8> from time to time, obtain official tags from the `origin` +and store them under `.git/refs/tags/`. + + +Push into another repository.:: ++ +------------ +satellite$ git clone mothership:frotz frotz <1> +satellite$ cd frotz +satellite$ git config --get-regexp '^(remote|branch)\.' <2> +remote.origin.url mothership:frotz +remote.origin.fetch refs/heads/*:refs/remotes/origin/* +branch.master.remote origin +branch.master.merge refs/heads/master +satellite$ git config remote.origin.push \ + master:refs/remotes/satellite/master <3> +satellite$ edit/compile/test/commit +satellite$ git push origin <4> + +mothership$ cd frotz +mothership$ git checkout master +mothership$ git merge satellite/master <5> +------------ ++ +<1> mothership machine has a frotz repository under your home +directory; clone from it to start a repository on the satellite +machine. +<2> clone sets these configuration variables by default. +It arranges `git pull` to fetch and store the branches of mothership +machine to local `remotes/origin/*` tracking branches. +<3> arrange `git push` to push local `master` branch to +`remotes/satellite/master` branch of the mothership machine. +<4> push will stash our work away on `remotes/satellite/master` +tracking branch on the mothership machine. You could use this as +a back-up method. +<5> on mothership machine, merge the work done on the satellite +machine into the master branch. + +Branch off of a specific tag.:: ++ +------------ +$ git checkout -b private2.6.14 v2.6.14 <1> +$ edit/compile/test; git commit -a +$ git checkout master +$ git format-patch -k -m --stdout v2.6.14..private2.6.14 | + git am -3 -k <2> +------------ ++ +<1> create a private branch based on a well known (but somewhat behind) +tag. +<2> forward port all changes in `private2.6.14` branch to `master` branch +without a formal "merging". + + +Integrator[[Integrator]] +------------------------ + +A fairly central person acting as the integrator in a group +project receives changes made by others, reviews and integrates +them and publishes the result for others to use, using these +commands in addition to the ones needed by participants. + + * linkgit:git-am[1] to apply patches e-mailed in from your + contributors. + + * linkgit:git-pull[1] to merge from your trusted lieutenants. + + * linkgit:git-format-patch[1] to prepare and send suggested + alternative to contributors. + + * linkgit:git-revert[1] to undo botched commits. + + * linkgit:git-push[1] to publish the bleeding edge. + + +Examples +~~~~~~~~ + +My typical GIT day.:: ++ +------------ +$ git status <1> +$ git show-branch <2> +$ mailx <3> +& s 2 3 4 5 ./+to-apply +& s 7 8 ./+hold-linus +& q +$ git checkout -b topic/one master +$ git am -3 -i -s -u ./+to-apply <4> +$ compile/test +$ git checkout -b hold/linus && git am -3 -i -s -u ./+hold-linus <5> +$ git checkout topic/one && git rebase master <6> +$ git checkout pu && git reset --hard next <7> +$ git merge topic/one topic/two && git merge hold/linus <8> +$ git checkout maint +$ git cherry-pick master~4 <9> +$ compile/test +$ git tag -s -m "GIT 0.99.9x" v0.99.9x <10> +$ git fetch ko && git show-branch master maint 'tags/ko-*' <11> +$ git push ko <12> +$ git push ko v0.99.9x <13> +------------ ++ +<1> see what I was in the middle of doing, if any. +<2> see what topic branches I have and think about how ready +they are. +<3> read mails, save ones that are applicable, and save others +that are not quite ready. +<4> apply them, interactively, with my sign-offs. +<5> create topic branch as needed and apply, again with my +sign-offs. +<6> rebase internal topic branch that has not been merged to the +master, nor exposed as a part of a stable branch. +<7> restart `pu` every time from the next. +<8> and bundle topic branches still cooking. +<9> backport a critical fix. +<10> create a signed tag. +<11> make sure I did not accidentally rewind master beyond what I +already pushed out. `ko` shorthand points at the repository I have +at kernel.org, and looks like this: ++ +------------ +$ cat .git/remotes/ko +URL: kernel.org:/pub/scm/git/git.git +Pull: master:refs/tags/ko-master +Pull: next:refs/tags/ko-next +Pull: maint:refs/tags/ko-maint +Push: master +Push: next +Push: +pu +Push: maint +------------ ++ +In the output from `git show-branch`, `master` should have +everything `ko-master` has, and `next` should have +everything `ko-next` has. + +<12> push out the bleeding edge. +<13> push the tag out, too. + + +Repository Administration[[Repository Administration]] +------------------------------------------------------ + +A repository administrator uses the following tools to set up +and maintain access to the repository by developers. + + * linkgit:git-daemon[1] to allow anonymous download from + repository. + + * linkgit:git-shell[1] can be used as a 'restricted login shell' + for shared central repository users. + +link:howto/update-hook-example.txt[update hook howto] has a good +example of managing a shared central repository. + + +Examples +~~~~~~~~ +We assume the following in /etc/services:: ++ +------------ +$ grep 9418 /etc/services +git 9418/tcp # Git Version Control System +------------ + +Run git-daemon to serve /pub/scm from inetd.:: ++ +------------ +$ grep git /etc/inetd.conf +git stream tcp nowait nobody \ + /usr/bin/git-daemon git-daemon --inetd --export-all /pub/scm +------------ ++ +The actual configuration line should be on one line. + +Run git-daemon to serve /pub/scm from xinetd.:: ++ +------------ +$ cat /etc/xinetd.d/git-daemon +# default: off +# description: The git server offers access to git repositories +service git +{ + disable = no + type = UNLISTED + port = 9418 + socket_type = stream + wait = no + user = nobody + server = /usr/bin/git-daemon + server_args = --inetd --export-all --base-path=/pub/scm + log_on_failure += USERID +} +------------ ++ +Check your xinetd(8) documentation and setup, this is from a Fedora system. +Others might be different. + +Give push/pull only access to developers.:: ++ +------------ +$ grep git /etc/passwd <1> +alice:x:1000:1000::/home/alice:/usr/bin/git-shell +bob:x:1001:1001::/home/bob:/usr/bin/git-shell +cindy:x:1002:1002::/home/cindy:/usr/bin/git-shell +david:x:1003:1003::/home/david:/usr/bin/git-shell +$ grep git /etc/shells <2> +/usr/bin/git-shell +------------ ++ +<1> log-in shell is set to /usr/bin/git-shell, which does not +allow anything but `git push` and `git pull`. The users should +get an ssh access to the machine. +<2> in many distributions /etc/shells needs to list what is used +as the login shell. + +CVS-style shared repository.:: ++ +------------ +$ grep git /etc/group <1> +git:x:9418:alice,bob,cindy,david +$ cd /home/devo.git +$ ls -l <2> + lrwxrwxrwx 1 david git 17 Dec 4 22:40 HEAD -> refs/heads/master + drwxrwsr-x 2 david git 4096 Dec 4 22:40 branches + -rw-rw-r-- 1 david git 84 Dec 4 22:40 config + -rw-rw-r-- 1 david git 58 Dec 4 22:40 description + drwxrwsr-x 2 david git 4096 Dec 4 22:40 hooks + -rw-rw-r-- 1 david git 37504 Dec 4 22:40 index + drwxrwsr-x 2 david git 4096 Dec 4 22:40 info + drwxrwsr-x 4 david git 4096 Dec 4 22:40 objects + drwxrwsr-x 4 david git 4096 Nov 7 14:58 refs + drwxrwsr-x 2 david git 4096 Dec 4 22:40 remotes +$ ls -l hooks/update <3> + -r-xr-xr-x 1 david git 3536 Dec 4 22:40 update +$ cat info/allowed-users <4> +refs/heads/master alice\|cindy +refs/heads/doc-update bob +refs/tags/v[0-9]* david +------------ ++ +<1> place the developers into the same git group. +<2> and make the shared repository writable by the group. +<3> use update-hook example by Carl from Documentation/howto/ +for branch policy control. +<4> alice and cindy can push into master, only bob can push into doc-update. +david is the release manager and is the only person who can +create and push version tags. + +HTTP server to support dumb protocol transfer.:: ++ +------------ +dev$ git update-server-info <1> +dev$ ftp user@isp.example.com <2> +ftp> cp -r .git /home/user/myproject.git +------------ ++ +<1> make sure your info/refs and objects/info/packs are up-to-date +<2> upload to public HTTP server hosted by your ISP. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt new file mode 100644 index 0000000..b675911 --- /dev/null +++ b/Documentation/fetch-options.txt @@ -0,0 +1,58 @@ +-q, \--quiet:: + Pass --quiet to git-fetch-pack and silence any other internally + used programs. + +-v, \--verbose:: + Be verbose. + +-a, \--append:: + Append ref names and object names of fetched refs to the + existing contents of `.git/FETCH_HEAD`. Without this + option old data in `.git/FETCH_HEAD` will be overwritten. + +\--upload-pack <upload-pack>:: + When given, and the repository to fetch from is handled + by 'git-fetch-pack', '--exec=<upload-pack>' is passed to + the command to specify non-default path for the command + run on the other end. + +-f, \--force:: + When `git-fetch` is used with `<rbranch>:<lbranch>` + refspec, it refuses to update the local branch + `<lbranch>` unless the remote branch `<rbranch>` it + fetches is a descendant of `<lbranch>`. This option + overrides that check. + +ifdef::git-pull[] +\--no-tags:: +endif::git-pull[] +ifndef::git-pull[] +-n, \--no-tags:: +endif::git-pull[] + By default, tags that point at objects that are downloaded + from the remote repository are fetched and stored locally. + This option disables this automatic tag following. + +-t, \--tags:: + Most of the tags are fetched automatically as branch + heads are downloaded, but tags that do not point at + objects reachable from the branch heads that are being + tracked will not be fetched by this mechanism. This + flag lets all tags and their associated objects be + downloaded. + +-k, \--keep:: + Keep downloaded pack. + +-u, \--update-head-ok:: + By default `git-fetch` refuses to update the head which + corresponds to the current branch. This flag disables the + check. This is purely for the internal use for `git-pull` + to communicate with `git-fetch`, and unless you are + implementing your own Porcelain you are not supposed to + use it. + +\--depth=<depth>:: + Deepen the history of a 'shallow' repository created by + `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) + by the specified number of commits. diff --git a/Documentation/fix-texi.perl b/Documentation/fix-texi.perl new file mode 100755 index 0000000..ff7d78f --- /dev/null +++ b/Documentation/fix-texi.perl @@ -0,0 +1,15 @@ +#!/usr/bin/perl -w + +while (<>) { + if (/^\@setfilename/) { + $_ = "\@setfilename git.info\n"; + } elsif (/^\@direntry/) { + print '@dircategory Development +@direntry +* Git: (git). A fast distributed revision control system +@end direntry +'; } + unless (/^\@direntry/../^\@end direntry/) { + print; + } +} diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt new file mode 100644 index 0000000..4779909 --- /dev/null +++ b/Documentation/git-add.txt @@ -0,0 +1,251 @@ +git-add(1) +========== + +NAME +---- +git-add - Add file contents to the index + +SYNOPSIS +-------- +[verse] +'git-add' [-n] [-v] [-f] [--interactive | -i] [--patch | -p] [-u] [--refresh] + [--] <filepattern>... + +DESCRIPTION +----------- +This command adds the current content of new or modified files to the +index, thus staging that content for inclusion in the next commit. + +The "index" holds a snapshot of the content of the working tree, and it +is this snapshot that is taken as the contents of the next commit. Thus +after making any changes to the working directory, and before running +the commit command, you must use the 'add' command to add any new or +modified files to the index. + +This command can be performed multiple times before a commit. It only +adds the content of the specified file(s) at the time the add command is +run; if you want subsequent changes included in the next commit, then +you must run 'git add' again to add the new content to the index. + +The 'git status' command can be used to obtain a summary of which +files have changes that are staged for the next commit. + +The 'git add' command will not add ignored files by default. If any +ignored files were explicitly specified on the command line, 'git add' +will fail with a list of ignored files. Ignored files reached by +directory recursion or filename globbing performed by Git (quote your +globs before the shell) will be silently ignored. The 'add' command can +be used to add ignored files with the `-f` (force) option. + +Please see linkgit:git-commit[1] for alternative ways to add content to a +commit. + + +OPTIONS +------- +<filepattern>...:: + Files to add content from. Fileglobs (e.g. `*.c`) can + be given to add all matching files. Also a + leading directory name (e.g. `dir` to add `dir/file1` + and `dir/file2`) can be given to add all files in the + directory, recursively. + +-n, \--dry-run:: + Don't actually add the file(s), just show if they exist. + +-v, \--verbose:: + Be verbose. + +-f:: + Allow adding otherwise ignored files. + +-i, \--interactive:: + Add modified contents in the working tree interactively to + the index. Optional path arguments may be supplied to limit + operation to a subset of the working tree. See ``Interactive + mode'' for details. + +-p, \--patch:: + Similar to Interactive mode but the initial command loop is + bypassed and the 'patch' subcommand is invoked using each of + the specified filepatterns before exiting. + +-u:: + Update only files that git already knows about. This is similar + to what "git commit -a" does in preparation for making a commit, + except that the update is limited to paths specified on the + command line. If no paths are specified, all tracked files in the + current directory and its subdirectories are updated. + +\--refresh:: + Don't add the file(s), but only refresh their stat() + information in the index. + +\--:: + This option can be used to separate command-line options from + the list of files, (useful when filenames might be mistaken + for command-line options). + + +Configuration +------------- + +The optional configuration variable 'core.excludesfile' indicates a path to a +file containing patterns of file names to exclude from git-add, similar to +$GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to +those in info/exclude. See link:repository-layout.html[repository layout]. + + +EXAMPLES +-------- +git-add Documentation/\\*.txt:: + + Adds content from all `\*.txt` files under `Documentation` + directory and its subdirectories. ++ +Note that the asterisk `\*` is quoted from the shell in this +example; this lets the command to include the files from +subdirectories of `Documentation/` directory. + +git-add git-*.sh:: + + Considers adding content from all git-*.sh scripts. + Because this example lets shell expand the asterisk + (i.e. you are listing the files explicitly), it does not + consider `subdir/git-foo.sh`. + +Interactive mode +---------------- +When the command enters the interactive mode, it shows the +output of the 'status' subcommand, and then goes into its +interactive command loop. + +The command loop shows the list of subcommands available, and +gives a prompt "What now> ". In general, when the prompt ends +with a single '>', you can pick only one of the choices given +and type return, like this: + +------------ + *** Commands *** + 1: status 2: update 3: revert 4: add untracked + 5: patch 6: diff 7: quit 8: help + What now> 1 +------------ + +You also could say "s" or "sta" or "status" above as long as the +choice is unique. + +The main command loop has 6 subcommands (plus help and quit). + +status:: + + This shows the change between HEAD and index (i.e. what will be + committed if you say "git commit"), and between index and + working tree files (i.e. what you could stage further before + "git commit" using "git-add") for each path. A sample output + looks like this: ++ +------------ + staged unstaged path + 1: binary nothing foo.png + 2: +403/-35 +1/-1 git-add--interactive.perl +------------ ++ +It shows that foo.png has differences from HEAD (but that is +binary so line count cannot be shown) and there is no +difference between indexed copy and the working tree +version (if the working tree version were also different, +'binary' would have been shown in place of 'nothing'). The +other file, git-add--interactive.perl, has 403 lines added +and 35 lines deleted if you commit what is in the index, but +working tree file has further modifications (one addition and +one deletion). + +update:: + + This shows the status information and gives prompt + "Update>>". When the prompt ends with double '>>', you can + make more than one selection, concatenated with whitespace or + comma. Also you can say ranges. E.g. "2-5 7,9" to choose + 2,3,4,5,7,9 from the list. You can say '*' to choose + everything. ++ +What you chose are then highlighted with '*', +like this: ++ +------------ + staged unstaged path + 1: binary nothing foo.png +* 2: +403/-35 +1/-1 git-add--interactive.perl +------------ ++ +To remove selection, prefix the input with `-` +like this: ++ +------------ +Update>> -2 +------------ ++ +After making the selection, answer with an empty line to stage the +contents of working tree files for selected paths in the index. + +revert:: + + This has a very similar UI to 'update', and the staged + information for selected paths are reverted to that of the + HEAD version. Reverting new paths makes them untracked. + +add untracked:: + + This has a very similar UI to 'update' and + 'revert', and lets you add untracked paths to the index. + +patch:: + + This lets you choose one path out of 'status' like selection. + After choosing the path, it presents diff between the index + and the working tree file and asks you if you want to stage + the change of each hunk. You can say: + + y - add the change from that hunk to index + n - do not add the change from that hunk to index + a - add the change from that hunk and all the rest to index + d - do not the change from that hunk nor any of the rest to index + j - do not decide on this hunk now, and view the next + undecided hunk + J - do not decide on this hunk now, and view the next hunk + k - do not decide on this hunk now, and view the previous + undecided hunk + K - do not decide on this hunk now, and view the previous hunk + s - split the current hunk into smaller hunks + ? - print help ++ +After deciding the fate for all hunks, if there is any hunk +that was chosen, the index is updated with the selected hunks. + +diff:: + + This lets you review what will be committed (i.e. between + HEAD and index). + + +See Also +-------- +linkgit:git-status[1] +linkgit:git-rm[1] +linkgit:git-reset[1] +linkgit:git-mv[1] +linkgit:git-commit[1] +linkgit:git-update-index[1] + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt new file mode 100644 index 0000000..e640fc7 --- /dev/null +++ b/Documentation/git-am.txt @@ -0,0 +1,160 @@ +git-am(1) +========= + +NAME +---- +git-am - Apply a series of patches from a mailbox + + +SYNOPSIS +-------- +[verse] +'git-am' [--signoff] [--dotest=<dir>] [--keep] [--utf8 | --no-utf8] + [--3way] [--interactive] [--binary] + [--whitespace=<option>] [-C<n>] [-p<n>] + <mbox>|<Maildir>... +'git-am' [--skip | --resolved] + +DESCRIPTION +----------- +Splits mail messages in a mailbox into commit log message, +authorship information and patches, and applies them to the +current branch. + +OPTIONS +------- +<mbox>|<Maildir>...:: + The list of mailbox files to read patches from. If you do not + supply this argument, reads from the standard input. If you supply + directories, they'll be treated as Maildirs. + +-s, --signoff:: + Add `Signed-off-by:` line to the commit message, using + the committer identity of yourself. + +-d=<dir>, --dotest=<dir>:: + Instead of `.dotest` directory, use <dir> as a working + area to store extracted patches. + +-k, --keep:: + Pass `-k` flag to `git-mailinfo` (see linkgit:git-mailinfo[1]). + +-u, --utf8:: + Pass `-u` flag to `git-mailinfo` (see linkgit:git-mailinfo[1]). + The proposed commit log message taken from the e-mail + is re-coded into UTF-8 encoding (configuration variable + `i18n.commitencoding` can be used to specify project's + preferred encoding if it is not UTF-8). ++ +This was optional in prior versions of git, but now it is the +default. You could use `--no-utf8` to override this. + +--no-utf8:: + Pass `-n` flag to `git-mailinfo` (see + linkgit:git-mailinfo[1]). + +-3, --3way:: + When the patch does not apply cleanly, fall back on + 3-way merge, if the patch records the identity of blobs + it is supposed to apply to, and we have those blobs + available locally. + +-b, --binary:: + Pass `--allow-binary-replacement` flag to `git-apply` + (see linkgit:git-apply[1]). + +--whitespace=<option>:: + This flag is passed to the `git-apply` (see linkgit:git-apply[1]) + program that applies + the patch. + +-C<n>, -p<n>:: + These flags are passed to the `git-apply` (see linkgit:git-apply[1]) + program that applies + the patch. + +-i, --interactive:: + Run interactively. + +--skip:: + Skip the current patch. This is only meaningful when + restarting an aborted patch. + +-r, --resolved:: + After a patch failure (e.g. attempting to apply + conflicting patch), the user has applied it by hand and + the index file stores the result of the application. + Make a commit using the authorship and commit log + extracted from the e-mail message and the current index + file, and continue. + +--resolvemsg=<msg>:: + When a patch failure occurs, <msg> will be printed + to the screen before exiting. This overrides the + standard message informing you to use `--resolved` + or `--skip` to handle the failure. This is solely + for internal use between `git-rebase` and `git-am`. + +DISCUSSION +---------- + +The commit author name is taken from the "From: " line of the +message, and commit author time is taken from the "Date: " line +of the message. The "Subject: " line is used as the title of +the commit, after stripping common prefix "[PATCH <anything>]". +It is supposed to describe what the commit is about concisely as +a one line text. + +The body of the message (iow, after a blank line that terminates +RFC2822 headers) can begin with "Subject: " and "From: " lines +that are different from those of the mail header, to override +the values of these fields. + +The commit message is formed by the title taken from the +"Subject: ", a blank line and the body of the message up to +where the patch begins. Excess whitespaces at the end of the +lines are automatically stripped. + +The patch is expected to be inline, directly following the +message. Any line that is of form: + +* three-dashes and end-of-line, or +* a line that begins with "diff -", or +* a line that begins with "Index: " + +is taken as the beginning of a patch, and the commit log message +is terminated before the first occurrence of such a line. + +When initially invoking it, you give it names of the mailboxes +to crunch. Upon seeing the first patch that does not apply, it +aborts in the middle,. You can recover from this in one of two ways: + +. skip the current patch by re-running the command with '--skip' + option. + +. hand resolve the conflict in the working directory, and update + the index file to bring it in a state that the patch should + have produced. Then run the command with '--resolved' option. + +The command refuses to process new mailboxes while `.dotest` +directory exists, so if you decide to start over from scratch, +run `rm -f -r .dotest` before running the command with mailbox +names. + + +SEE ALSO +-------- +linkgit:git-apply[1]. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-annotate.txt b/Documentation/git-annotate.txt new file mode 100644 index 0000000..45a6a72 --- /dev/null +++ b/Documentation/git-annotate.txt @@ -0,0 +1,31 @@ +git-annotate(1) +=============== + +NAME +---- +git-annotate - Annotate file lines with commit info + +SYNOPSIS +-------- +git-annotate [options] file [revision] + +DESCRIPTION +----------- +Annotates each line in the given file with information from the commit +which introduced the line. Optionally annotate from a given revision. + +OPTIONS +------- +include::blame-options.txt[] + +SEE ALSO +-------- +linkgit:git-blame[1] + +AUTHOR +------ +Written by Ryan Anderson <ryan@michonline.com>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt new file mode 100644 index 0000000..2dec2ec --- /dev/null +++ b/Documentation/git-apply.txt @@ -0,0 +1,209 @@ +git-apply(1) +============ + +NAME +---- +git-apply - Apply a patch on a git index file and a working tree + + +SYNOPSIS +-------- +[verse] +'git-apply' [--stat] [--numstat] [--summary] [--check] [--index] + [--apply] [--no-add] [--build-fake-ancestor <file>] [-R | --reverse] + [--allow-binary-replacement | --binary] [--reject] [-z] + [-pNUM] [-CNUM] [--inaccurate-eof] [--cached] + [--whitespace=<nowarn|warn|fix|error|error-all>] + [--exclude=PATH] [--verbose] [<patch>...] + +DESCRIPTION +----------- +Reads supplied diff output and applies it on a git index file +and a work tree. + +OPTIONS +------- +<patch>...:: + The files to read patch from. '-' can be used to read + from the standard input. + +--stat:: + Instead of applying the patch, output diffstat for the + input. Turns off "apply". + +--numstat:: + Similar to \--stat, but shows number of added and + deleted lines in decimal notation and pathname without + abbreviation, to make it more machine friendly. For + binary files, outputs two `-` instead of saying + `0 0`. Turns off "apply". + +--summary:: + Instead of applying the patch, output a condensed + summary of information obtained from git diff extended + headers, such as creations, renames and mode changes. + Turns off "apply". + +--check:: + Instead of applying the patch, see if the patch is + applicable to the current work tree and/or the index + file and detects errors. Turns off "apply". + +--index:: + When --check is in effect, or when applying the patch + (which is the default when none of the options that + disables it is in effect), make sure the patch is + applicable to what the current index file records. If + the file to be patched in the work tree is not + up-to-date, it is flagged as an error. This flag also + causes the index file to be updated. + +--cached:: + Apply a patch without touching the working tree. Instead, take the + cached data, apply the patch, and store the result in the index, + without using the working tree. This implies '--index'. + +--build-fake-ancestor <file>:: + Newer git-diff output has embedded 'index information' + for each blob to help identify the original version that + the patch applies to. When this flag is given, and if + the original versions of the blobs is available locally, + builds a temporary index containing those blobs. ++ +When a pure mode change is encountered (which has no index information), +the information is read from the current index instead. + +-R, --reverse:: + Apply the patch in reverse. + +--reject:: + For atomicity, linkgit:git-apply[1] by default fails the whole patch and + does not touch the working tree when some of the hunks + do not apply. This option makes it apply + the parts of the patch that are applicable, and leave the + rejected hunks in corresponding *.rej files. + +-z:: + When showing the index information, do not munge paths, + but use NUL terminated machine readable format. Without + this flag, the pathnames output will have TAB, LF, and + backslash characters replaced with `\t`, `\n`, and `\\`, + respectively. + +-p<n>:: + Remove <n> leading slashes from traditional diff paths. The + default is 1. + +-C<n>:: + Ensure at least <n> lines of surrounding context match before + and after each change. When fewer lines of surrounding + context exist they all must match. By default no context is + ever ignored. + +--unidiff-zero:: + By default, linkgit:git-apply[1] expects that the patch being + applied is a unified diff with at least one line of context. + This provides good safety measures, but breaks down when + applying a diff generated with --unified=0. To bypass these + checks use '--unidiff-zero'. ++ +Note, for the reasons stated above usage of context-free patches are +discouraged. + +--apply:: + If you use any of the options marked "Turns off + 'apply'" above, linkgit:git-apply[1] reads and outputs the + information you asked without actually applying the + patch. Give this flag after those flags to also apply + the patch. + +--no-add:: + When applying a patch, ignore additions made by the + patch. This can be used to extract the common part between + two files by first running `diff` on them and applying + the result with this option, which would apply the + deletion part but not addition part. + +--allow-binary-replacement, --binary:: + Historically we did not allow binary patch applied + without an explicit permission from the user, and this + flag was the way to do so. Currently we always allow binary + patch application, so this is a no-op. + +--exclude=<path-pattern>:: + Don't apply changes to files matching the given path pattern. This can + be useful when importing patchsets, where you want to exclude certain + files or directories. + +--whitespace=<action>:: + When applying a patch, detect a new or modified line that has + whitespace errors. What are considered whitespace errors is + controlled by `core.whitespace` configuration. By default, + trailing whitespaces (including lines that solely consist of + whitespaces) and a space character that is immediately followed + by a tab character inside the initial indent of the line are + considered whitespace errors. ++ +By default, the command outputs warning messages but applies the patch. +When linkgit:git-apply[1] is used for statistics and not applying a +patch, it defaults to `nowarn`. ++ +You can use different `<action>` to control this +behavior: ++ +* `nowarn` turns off the trailing whitespace warning. +* `warn` outputs warnings for a few such errors, but applies the + patch as-is (default). +* `fix` outputs warnings for a few such errors, and applies the + patch after fixing them (`strip` is a synonym --- the tool + used to consider only trailing whitespaces as errors, and the + fix involved 'stripping' them, but modern gits do more). +* `error` outputs warnings for a few such errors, and refuses + to apply the patch. +* `error-all` is similar to `error` but shows all errors. + +--inaccurate-eof:: + Under certain circumstances, some versions of diff do not correctly + detect a missing new-line at the end of the file. As a result, patches + created by such diff programs do not record incomplete lines + correctly. This option adds support for applying such patches by + working around this bug. + +-v, --verbose:: + Report progress to stderr. By default, only a message about the + current patch being applied will be printed. This option will cause + additional information to be reported. + +Configuration +------------- + +apply.whitespace:: + When no `--whitespace` flag is given from the command + line, this configuration item is used as the default. + +Submodules +---------- +If the patch contains any changes to submodules then linkgit:git-apply[1] +treats these changes as follows. + +If --index is specified (explicitly or implicitly), then the submodule +commits must match the index exactly for the patch to apply. If any +of the submodules are checked-out, then these check-outs are completely +ignored, i.e., they are not required to be up-to-date or clean and they +are not updated. + +If --index is not specified, then the submodule commits in the patch +are ignored and only the absence of presence of the corresponding +subdirectory is checked and (if possible) updated. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-archimport.txt b/Documentation/git-archimport.txt new file mode 100644 index 0000000..bd20fd8 --- /dev/null +++ b/Documentation/git-archimport.txt @@ -0,0 +1,120 @@ +git-archimport(1) +================= + +NAME +---- +git-archimport - Import an Arch repository into git + + +SYNOPSIS +-------- +[verse] +'git-archimport' [-h] [-v] [-o] [-a] [-f] [-T] [-D depth] [-t tempdir] + <archive/branch>[:<git-branch>] ... + +DESCRIPTION +----------- +Imports a project from one or more Arch repositories. It will follow branches +and repositories within the namespaces defined by the <archive/branch> +parameters supplied. If it cannot find the remote branch a merge comes from +it will just import it as a regular commit. If it can find it, it will mark it +as a merge whenever possible (see discussion below). + +The script expects you to provide the key roots where it can start the import +from an 'initial import' or 'tag' type of Arch commit. It will follow and +import new branches within the provided roots. + +It expects to be dealing with one project only. If it sees +branches that have different roots, it will refuse to run. In that case, +edit your <archive/branch> parameters to define clearly the scope of the +import. + +`git-archimport` uses `tla` extensively in the background to access the +Arch repository. +Make sure you have a recent version of `tla` available in the path. `tla` must +know about the repositories you pass to `git-archimport`. + +For the initial import `git-archimport` expects to find itself in an empty +directory. To follow the development of a project that uses Arch, rerun +`git-archimport` with the same parameters as the initial import to perform +incremental imports. + +While git-archimport will try to create sensible branch names for the +archives that it imports, it is also possible to specify git branch names +manually. To do so, write a git branch name after each <archive/branch> +parameter, separated by a colon. This way, you can shorten the Arch +branch names and convert Arch jargon to git jargon, for example mapping a +"PROJECT--devo--VERSION" branch to "master". + +Associating multiple Arch branches to one git branch is possible; the +result will make the most sense only if no commits are made to the first +branch, after the second branch is created. Still, this is useful to +convert Arch repositories that had been rotated periodically. + + +MERGES +------ +Patch merge data from Arch is used to mark merges in git as well. git +does not care much about tracking patches, and only considers a merge when a +branch incorporates all the commits since the point they forked. The end result +is that git will have a good idea of how far branches have diverged. So the +import process does lose some patch-trading metadata. + +Fortunately, when you try and merge branches imported from Arch, +git will find a good merge base, and it has a good chance of identifying +patches that have been traded out-of-sequence between the branches. + +OPTIONS +------- + +-h:: + Display usage. + +-v:: + Verbose output. + +-T:: + Many tags. Will create a tag for every commit, reflecting the commit + name in the Arch repository. + +-f:: + Use the fast patchset import strategy. This can be significantly + faster for large trees, but cannot handle directory renames or + permissions changes. The default strategy is slow and safe. + +-o:: + Use this for compatibility with old-style branch names used by + earlier versions of git-archimport. Old-style branch names + were category--branch, whereas new-style branch names are + archive,category--branch--version. In both cases, names given + on the command-line will override the automatically-generated + ones. + +-D <depth>:: + Follow merge ancestry and attempt to import trees that have been + merged from. Specify a depth greater than 1 if patch logs have been + pruned. + +-a:: + Attempt to auto-register archives at http://mirrors.sourcecontrol.net + This is particularly useful with the -D option. + +-t <tmpdir>:: + Override the default tempdir. + + +<archive/branch>:: + Archive/branch identifier in a format that `tla log` understands. + + +Author +------ +Written by Martin Langhoff <martin@catalyst.net.nz>. + +Documentation +-------------- +Documentation by Junio C Hamano, Martin Langhoff and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-archive.txt b/Documentation/git-archive.txt new file mode 100644 index 0000000..d3eaa16 --- /dev/null +++ b/Documentation/git-archive.txt @@ -0,0 +1,121 @@ +git-archive(1) +============== + +NAME +---- +git-archive - Create an archive of files from a named tree + + +SYNOPSIS +-------- +[verse] +'git-archive' --format=<fmt> [--list] [--prefix=<prefix>/] [<extra>] + [--remote=<repo> [--exec=<git-upload-archive>]] <tree-ish> + [path...] + +DESCRIPTION +----------- +Creates an archive of the specified format containing the tree +structure for the named tree, and writes it out to the standard +output. If <prefix> is specified it is +prepended to the filenames in the archive. + +'git-archive' behaves differently when given a tree ID versus when +given a commit ID or tag ID. In the first case the current time is +used as modification time of each file in the archive. In the latter +case the commit time as recorded in the referenced commit object is +used instead. Additionally the commit ID is stored in a global +extended pax header if the tar format is used; it can be extracted +using 'git-get-tar-commit-id'. In ZIP files it is stored as a file +comment. + +OPTIONS +------- + +--format=<fmt>:: + Format of the resulting archive: 'tar' or 'zip'. The default + is 'tar'. + +--list, -l:: + Show all available formats. + +--verbose, -v:: + Report progress to stderr. + +--prefix=<prefix>/:: + Prepend <prefix>/ to each filename in the archive. + +<extra>:: + This can be any options that the archiver backend understand. + See next section. + +--remote=<repo>:: + Instead of making a tar archive from local repository, + retrieve a tar archive from a remote repository. + +--exec=<git-upload-archive>:: + Used with --remote to specify the path to the + git-upload-archive executable on the remote side. + +<tree-ish>:: + The tree or commit to produce an archive for. + +path:: + If one or more paths are specified, include only these in the + archive, otherwise include all files and subdirectories. + +BACKEND EXTRA OPTIONS +--------------------- + +zip +~~~ +-0:: + Store the files instead of deflating them. +-9:: + Highest and slowest compression level. You can specify any + number from 1 to 9 to adjust compression speed and ratio. + + +CONFIGURATION +------------- + +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) for + details. + +EXAMPLES +-------- +git archive --format=tar --prefix=junk/ HEAD | (cd /var/tmp/ && tar xf -):: + + Create a tar archive that contains the contents of the + latest commit on the current branch, and extracts it in + `/var/tmp/junk` directory. + +git archive --format=tar --prefix=git-1.4.0/ v1.4.0 | gzip >git-1.4.0.tar.gz:: + + Create a compressed tarball for v1.4.0 release. + +git archive --format=tar --prefix=git-1.4.0/ v1.4.0{caret}\{tree\} | gzip >git-1.4.0.tar.gz:: + + Create a compressed tarball for v1.4.0 release, but without a + global extended pax header. + +git archive --format=zip --prefix=git-docs/ HEAD:Documentation/ > git-1.4.0-docs.zip:: + + Put everything in the current head's Documentation/ directory + into 'git-1.4.0-docs.zip', with the prefix 'git-docs/'. + +Author +------ +Written by Franck Bui-Huu and Rene Scharfe. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt new file mode 100644 index 0000000..96585ae --- /dev/null +++ b/Documentation/git-bisect.txt @@ -0,0 +1,230 @@ +git-bisect(1) +============= + +NAME +---- +git-bisect - Find the change that introduced a bug by binary search + + +SYNOPSIS +-------- +'git bisect' <subcommand> <options> + +DESCRIPTION +----------- +The command takes various subcommands, and different options depending +on the subcommand: + + git bisect start [<bad> [<good>...]] [--] [<paths>...] + git bisect bad [<rev>] + git bisect good [<rev>...] + git bisect skip [<rev>...] + git bisect reset [<branch>] + git bisect visualize + git bisect replay <logfile> + git bisect log + git bisect run <cmd>... + +This command uses 'git-rev-list --bisect' option to help drive the +binary search process to find which change introduced a bug, given an +old "good" commit object name and a later "bad" commit object name. + +Basic bisect commands: start, bad, good +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The way you use it is: + +------------------------------------------------ +$ git bisect start +$ git bisect bad # Current version is bad +$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version + # tested that was good +------------------------------------------------ + +When you give at least one bad and one good versions, it will bisect +the revision tree and say something like: + +------------------------------------------------ +Bisecting: 675 revisions left to test after this +------------------------------------------------ + +and check out the state in the middle. Now, compile that kernel, and +boot it. Now, let's say that this booted kernel works fine, then just +do + +------------------------------------------------ +$ git bisect good # this one is good +------------------------------------------------ + +which will now say + +------------------------------------------------ +Bisecting: 337 revisions left to test after this +------------------------------------------------ + +and you continue along, compiling that one, testing it, and depending +on whether it is good or bad, you say "git bisect good" or "git bisect +bad", and ask for the next bisection. + +Until you have no more left, and you'll have been left with the first +bad kernel rev in "refs/bisect/bad". + +Bisect reset +~~~~~~~~~~~~ + +Oh, and then after you want to reset to the original head, do a + +------------------------------------------------ +$ git bisect reset +------------------------------------------------ + +to get back to the master branch, instead of being in one of the +bisection branches ("git bisect start" will do that for you too, +actually: it will reset the bisection state, and before it does that +it checks that you're not using some old bisection branch). + +Bisect visualize +~~~~~~~~~~~~~~~~ + +During the bisection process, you can say + +------------ +$ git bisect visualize +------------ + +to see the currently remaining suspects in `gitk`. `visualize` is a bit +too long to type and `view` is provided as a synonym. + +If `DISPLAY` environment variable is not set, `git log` is used +instead. You can even give command line options such as `-p` and +`--stat`. + +------------ +$ git bisect view --stat +------------ + +Bisect log and bisect replay +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The good/bad input is logged, and + +------------ +$ git bisect log +------------ + +shows what you have done so far. You can truncate its output somewhere +and save it in a file, and run + +------------ +$ git bisect replay that-file +------------ + +if you find later you made a mistake telling good/bad about a +revision. + +Avoiding to test a commit +~~~~~~~~~~~~~~~~~~~~~~~~~ + +If in a middle of bisect session, you know what the bisect suggested +to try next is not a good one to test (e.g. the change the commit +introduces is known not to work in your environment and you know it +does not have anything to do with the bug you are chasing), you may +want to find a near-by commit and try that instead. + +It goes something like this: + +------------ +$ git bisect good/bad # previous round was good/bad. +Bisecting: 337 revisions left to test after this +$ git bisect visualize # oops, that is uninteresting. +$ git reset --hard HEAD~3 # try 3 revs before what + # was suggested +------------ + +Then compile and test the one you chose to try. After that, tell +bisect what the result was as usual. + +Bisect skip +~~~~~~~~~~~~ + +Instead of choosing by yourself a nearby commit, you may just want git +to do it for you using: + +------------ +$ git bisect skip # Current version cannot be tested +------------ + +But computing the commit to test may be slower afterwards and git may +eventually not be able to tell the first bad among a bad and one or +more "skip"ped commits. + +Cutting down bisection by giving more parameters to bisect start +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You can further cut down the number of trials if you know what part of +the tree is involved in the problem you are tracking down, by giving +paths parameters when you say `bisect start`, like this: + +------------ +$ git bisect start -- arch/i386 include/asm-i386 +------------ + +If you know beforehand more than one good commits, you can narrow the +bisect space down without doing the whole tree checkout every time you +give good commits. You give the bad revision immediately after `start` +and then you give all the good revisions you have: + +------------ +$ git bisect start v2.6.20-rc6 v2.6.20-rc4 v2.6.20-rc1 -- + # v2.6.20-rc6 is bad + # v2.6.20-rc4 and v2.6.20-rc1 are good +------------ + +Bisect run +~~~~~~~~~~ + +If you have a script that can tell if the current source code is good +or bad, you can automatically bisect using: + +------------ +$ git bisect run my_script +------------ + +Note that the "run" script (`my_script` in the above example) should +exit with code 0 in case the current source code is good. Exit with a +code between 1 and 127 (inclusive), except 125, if the current +source code is bad. + +Any other exit code will abort the automatic bisect process. (A +program that does "exit(-1)" leaves $? = 255, see exit(3) manual page, +the value is chopped with "& 0377".) + +The special exit code 125 should be used when the current source code +cannot be tested. If the "run" script exits with this code, the current +revision will be skipped, see `git bisect skip` above. + +You may often find that during bisect you want to have near-constant +tweaks (e.g., s/#define DEBUG 0/#define DEBUG 1/ in a header file, or +"revision that does not have this commit needs this patch applied to +work around other problem this bisection is not interested in") +applied to the revision being tested. + +To cope with such a situation, after the inner git-bisect finds the +next revision to test, with the "run" script, you can apply that tweak +before compiling, run the real test, and after the test decides if the +revision (possibly with the needed tweaks) passed the test, rewind the +tree to the pristine state. Finally the "run" script can exit with +the status of the real test to let "git bisect run" command loop to +know the outcome. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt new file mode 100644 index 0000000..14163b6 --- /dev/null +++ b/Documentation/git-blame.txt @@ -0,0 +1,195 @@ +git-blame(1) +============ + +NAME +---- +git-blame - Show what revision and author last modified each line of a file + +SYNOPSIS +-------- +[verse] +'git-blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-p] [-w] [--incremental] [-L n,m] + [-S <revs-file>] [-M] [-C] [-C] [--since=<date>] + [<rev> | --contents <file>] [--] <file> + +DESCRIPTION +----------- + +Annotates each line in the given file with information from the revision which +last modified the line. Optionally, start annotating from the given revision. + +Also it can limit the range of lines annotated. + +This report doesn't tell you anything about lines which have been deleted or +replaced; you need to use a tool such as linkgit:git-diff[1] or the "pickaxe" +interface briefly mentioned in the following paragraph. + +Apart from supporting file annotation, git also supports searching the +development history for when a code snippet occurred in a change. This makes it +possible to track when a code snippet was added to a file, moved or copied +between files, and eventually deleted or replaced. It works by searching for +a text string in the diff. A small example: + +----------------------------------------------------------------------------- +$ git log --pretty=oneline -S'blame_usage' +5040f17eba15504bad66b14a645bddd9b015ebb7 blame -S <ancestry-file> +ea4c7f9bf69e781dd0cd88d2bccb2bf5cc15c9a7 git-blame: Make the output +----------------------------------------------------------------------------- + +OPTIONS +------- +include::blame-options.txt[] + +-c:: + Use the same output mode as linkgit:git-annotate[1] (Default: off). + +--score-debug:: + Include debugging information related to the movement of + lines between files (see `-C`) and lines moved within a + file (see `-M`). The first number listed is the score. + This is the number of alphanumeric characters detected + to be moved between or within files. This must be above + a certain threshold for git-blame to consider those lines + of code to have been moved. + +-f, --show-name:: + Show filename in the original commit. By default + filename is shown if there is any line that came from a + file with different name, due to rename detection. + +-n, --show-number:: + Show line number in the original commit (Default: off). + +-s:: + Suppress author name and timestamp from the output. + +-w:: + Ignore whitespace when comparing parent's version and + child's to find where the lines came from. + + +THE PORCELAIN FORMAT +-------------------- + +In this format, each line is output after a header; the +header at the minimum has the first line which has: + +- 40-byte SHA-1 of the commit the line is attributed to; +- the line number of the line in the original file; +- the line number of the line in the final file; +- on a line that starts a group of line from a different + commit than the previous one, the number of lines in this + group. On subsequent lines this field is absent. + +This header line is followed by the following information +at least once for each commit: + +- author name ("author"), email ("author-mail"), time + ("author-time"), and timezone ("author-tz"); similarly + for committer. +- filename in the commit the line is attributed to. +- the first line of the commit log message ("summary"). + +The contents of the actual line is output after the above +header, prefixed by a TAB. This is to allow adding more +header elements later. + + +SPECIFYING RANGES +----------------- + +Unlike `git-blame` and `git-annotate` in older git, the extent +of annotation can be limited to both line ranges and revision +ranges. When you are interested in finding the origin for +ll. 40-60 for file `foo`, you can use `-L` option like these +(they mean the same thing -- both ask for 21 lines starting at +line 40): + + git blame -L 40,60 foo + git blame -L 40,+21 foo + +Also you can use regular expression to specify the line range. + + git blame -L '/^sub hello {/,/^}$/' foo + +would limit the annotation to the body of `hello` subroutine. + +When you are not interested in changes older than the version +v2.6.18, or changes older than 3 weeks, you can use revision +range specifiers similar to `git-rev-list`: + + git blame v2.6.18.. -- foo + git blame --since=3.weeks -- foo + +When revision range specifiers are used to limit the annotation, +lines that have not changed since the range boundary (either the +commit v2.6.18 or the most recent commit that is more than 3 +weeks old in the above example) are blamed for that range +boundary commit. + +A particularly useful way is to see if an added file have lines +created by copy-and-paste from existing files. Sometimes this +indicates that the developer was being sloppy and did not +refactor the code properly. You can first find the commit that +introduced the file with: + + git log --diff-filter=A --pretty=short -- foo + +and then annotate the change between the commit and its +parents, using `commit{caret}!` notation: + + git blame -C -C -f $commit^! -- foo + + +INCREMENTAL OUTPUT +------------------ + +When called with `--incremental` option, the command outputs the +result as it is built. The output generally will talk about +lines touched by more recent commits first (i.e. the lines will +be annotated out of order) and is meant to be used by +interactive viewers. + +The output format is similar to the Porcelain format, but it +does not contain the actual lines from the file that is being +annotated. + +. Each blame entry always starts with a line of: + + <40-byte hex sha1> <sourceline> <resultline> <num_lines> ++ +Line numbers count from 1. + +. The first time that commit shows up in the stream, it has various + other information about it printed out with a one-word tag at the + beginning of each line about that "extended commit info" (author, + email, committer, dates, summary etc). + +. Unlike Porcelain format, the filename information is always + given and terminates the entry: + + "filename" <whitespace-quoted-filename-goes-here> ++ +and thus it's really quite easy to parse for some line- and word-oriented +parser (which should be quite natural for most scripting languages). ++ +[NOTE] +For people who do parsing: to make it more robust, just ignore any +lines in between the first and last one ("<sha1>" and "filename" lines) +where you don't recognize the tag-words (or care about that particular +one) at the beginning of the "extended information" lines. That way, if +there is ever added information (like the commit encoding or extended +commit commentary), a blame viewer won't ever care. + + +SEE ALSO +-------- +linkgit:git-annotate[1] + +AUTHOR +------ +Written by Junio C Hamano <junkio@cox.net> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt new file mode 100644 index 0000000..7e8874a --- /dev/null +++ b/Documentation/git-branch.txt @@ -0,0 +1,191 @@ +git-branch(1) +============= + +NAME +---- +git-branch - List, create, or delete branches + +SYNOPSIS +-------- +[verse] +'git-branch' [--color | --no-color] [-r | -a] + [-v [--abbrev=<length> | --no-abbrev]] + [--contains <commit>] +'git-branch' [--track | --no-track] [-l] [-f] <branchname> [<start-point>] +'git-branch' (-m | -M) [<oldbranch>] <newbranch> +'git-branch' (-d | -D) [-r] <branchname>... + +DESCRIPTION +----------- +With no arguments given a list of existing branches +will be shown, the current branch will be highlighted with an asterisk. +Option `-r` causes the remote-tracking branches to be listed, +and option `-a` shows both. +With `--contains <commit>`, shows only the branches that +contains the named commit (in other words, the branches whose +tip commits are descendant of the named commit). + +In its second form, a new branch named <branchname> will be created. +It will start out with a head equal to the one given as <start-point>. +If no <start-point> is given, the branch will be created with a head +equal to that of the currently checked out branch. + +Note that this will create the new branch, but it will not switch the +working tree to it; use "git checkout <newbranch>" to switch to the +new branch. + +When a local branch is started off a remote branch, git sets up the +branch so that linkgit:git-pull[1] will appropriately merge from that +remote branch. If this behavior is not desired, it is possible to +disable it using the global `branch.autosetupmerge` configuration +flag. That setting can be overridden by using the `--track` +and `--no-track` options. + +With a '-m' or '-M' option, <oldbranch> will be renamed to <newbranch>. +If <oldbranch> had a corresponding reflog, it is renamed to match +<newbranch>, and a reflog entry is created to remember the branch +renaming. If <newbranch> exists, -M must be used to force the rename +to happen. + +With a `-d` or `-D` option, `<branchname>` will be deleted. You may +specify more than one branch for deletion. If the branch currently +has a reflog then the reflog will also be deleted. + +Use -r together with -d to delete remote-tracking branches. Note, that it +only makes sense to delete remote-tracking branches if they no longer exist +in remote repository or if linkgit:git-fetch[1] was configured not to fetch +them again. See also 'prune' subcommand of linkgit:git-remote[1] for way to +clean up all obsolete remote-tracking branches. + + +OPTIONS +------- +-d:: + Delete a branch. The branch must be fully merged in HEAD. + +-D:: + Delete a branch irrespective of its merged status. + +-l:: + Create the branch's reflog. This activates recording of + all changes made to the branch ref, enabling use of date + based sha1 expressions such as "<branchname>@\{yesterday}". + +-f:: + Force the creation of a new branch even if it means deleting + a branch that already exists with the same name. + +-m:: + Move/rename a branch and the corresponding reflog. + +-M:: + Move/rename a branch even if the new branchname already exists. + +--color:: + Color branches to highlight current, local, and remote branches. + +--no-color:: + Turn off branch colors, even when the configuration file gives the + default to color output. + +-r:: + List or delete (if used with -d) the remote-tracking branches. + +-a:: + List both remote-tracking branches and local branches. + +-v, --verbose:: + Show sha1 and commit subject line for each head. + +--abbrev=<length>:: + Alter minimum display length for sha1 in output listing, + default value is 7. + +--no-abbrev:: + Display the full sha1s in output listing rather than abbreviating them. + +--track:: + Set up configuration so that git-pull will automatically + retrieve data from the remote branch. Use this if you always + pull from the same remote branch into the new branch, or if you + don't want to use "git pull <repository> <refspec>" explicitly. + This behavior is the default. Set the + branch.autosetupmerge configuration variable to false if you + want git-checkout and git-branch to always behave as if + '--no-track' were given. + +--no-track:: + When a branch is created off a remote branch, + set up configuration so that git-pull will not retrieve data + from the remote branch, ignoring the branch.autosetupmerge + configuration variable. + +<branchname>:: + The name of the branch to create or delete. + The new branch name must pass all checks defined by + linkgit:git-check-ref-format[1]. Some of these checks + may restrict the characters allowed in a branch name. + +<start-point>:: + The new branch will be created with a HEAD equal to this. It may + be given as a branch name, a commit-id, or a tag. If this option + is omitted, the current branch is assumed. + +<oldbranch>:: + The name of an existing branch to rename. + +<newbranch>:: + The new name for an existing branch. The same restrictions as for + <branchname> applies. + + +Examples +-------- + +Start development off of a known tag:: ++ +------------ +$ git clone git://git.kernel.org/pub/scm/.../linux-2.6 my2.6 +$ cd my2.6 +$ git branch my2.6.14 v2.6.14 <1> +$ git checkout my2.6.14 +------------ ++ +<1> This step and the next one could be combined into a single step with +"checkout -b my2.6.14 v2.6.14". + +Delete unneeded branch:: ++ +------------ +$ git clone git://git.kernel.org/.../git.git my.git +$ cd my.git +$ git branch -d -r origin/todo origin/html origin/man <1> +$ git branch -D test <2> +------------ ++ +<1> Delete remote-tracking branches "todo", "html", "man". Next 'fetch' or +'pull' will create them again unless you configure them not to. See +linkgit:git-fetch[1]. +<2> Delete "test" branch even if the "master" branch (or whichever branch is +currently checked out) does not have all commits from test branch. + + +Notes +----- + +If you are creating a branch that you want to immediately checkout, it's +easier to use the git checkout command with its `-b` option to create +a branch and check it out with a single command. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt new file mode 100644 index 0000000..72f080a --- /dev/null +++ b/Documentation/git-bundle.txt @@ -0,0 +1,148 @@ +git-bundle(1) +============= + +NAME +---- +git-bundle - Move objects and refs by archive + + +SYNOPSIS +-------- +[verse] +'git-bundle' create <file> [git-rev-list args] +'git-bundle' verify <file> +'git-bundle' list-heads <file> [refname...] +'git-bundle' unbundle <file> [refname...] + +DESCRIPTION +----------- + +Some workflows require that one or more branches of development on one +machine be replicated on another machine, but the two machines cannot +be directly connected so the interactive git protocols (git, ssh, +rsync, http) cannot be used. This command provides support for +git-fetch and git-pull to operate by packaging objects and references +in an archive at the originating machine, then importing those into +another repository using linkgit:git-fetch[1] and linkgit:git-pull[1] +after moving the archive by some means (i.e., by sneakernet). As no +direct connection between repositories exists, the user must specify a +basis for the bundle that is held by the destination repository: the +bundle assumes that all objects in the basis are already in the +destination repository. + +OPTIONS +------- + +create <file>:: + Used to create a bundle named 'file'. This requires the + git-rev-list arguments to define the bundle contents. + +verify <file>:: + Used to check that a bundle file is valid and will apply + cleanly to the current repository. This includes checks on the + bundle format itself as well as checking that the prerequisite + commits exist and are fully linked in the current repository. + git-bundle prints a list of missing commits, if any, and exits + with non-zero status. + +list-heads <file>:: + Lists the references defined in the bundle. If followed by a + list of references, only references matching those given are + printed out. + +unbundle <file>:: + Passes the objects in the bundle to linkgit:git-index-pack[1] + for storage in the repository, then prints the names of all + defined references. If a reflist is given, only references + matching those in the given list are printed. This command is + really plumbing, intended to be called only by + linkgit:git-fetch[1]. + +[git-rev-list-args...]:: + A list of arguments, acceptable to git-rev-parse and + git-rev-list, that specify the specific objects and references + to transport. For example, "master~10..master" causes the + current master reference to be packaged along with all objects + added since its 10th ancestor commit. There is no explicit + limit to the number of references and objects that may be + packaged. + + +[refname...]:: + A list of references used to limit the references reported as + available. This is principally of use to git-fetch, which + expects to receive only those references asked for and not + necessarily everything in the pack (in this case, git-bundle is + acting like linkgit:git-fetch-pack[1]). + +SPECIFYING REFERENCES +--------------------- + +git-bundle will only package references that are shown by +git-show-ref: this includes heads, tags, and remote heads. References +such as master~1 cannot be packaged, but are perfectly suitable for +defining the basis. More than one reference may be packaged, and more +than one basis can be specified. The objects packaged are those not +contained in the union of the given bases. Each basis can be +specified explicitly (e.g., ^master~10), or implicitly (e.g., +master~10..master, master --since=10.days.ago). + +It is very important that the basis used be held by the destination. +It is okay to err on the side of conservatism, causing the bundle file +to contain objects already in the destination as these are ignored +when unpacking at the destination. + +EXAMPLE +------- + +Assume two repositories exist as R1 on machine A, and R2 on machine B. +For whatever reason, direct connection between A and B is not allowed, +but we can move data from A to B via some mechanism (CD, email, etc). +We want to update R2 with developments made on branch master in R1. +We set a tag in R1 (lastR2bundle) after the previous such transport, +and move it afterwards to help build the bundle. + +in R1 on A: + +------------ +$ git-bundle create mybundle master ^lastR2bundle +$ git tag -f lastR2bundle master +------------ + +(move mybundle from A to B by some mechanism) + +in R2 on B: + +------------ +$ git-bundle verify mybundle +$ git-fetch mybundle refspec +------------ + +where refspec is refInBundle:localRef + + +Also, with something like this in your config: + +[remote "bundle"] + url = /home/me/tmp/file.bdl + fetch = refs/heads/*:refs/remotes/origin/* + +You can first sneakernet the bundle file to ~/tmp/file.bdl and +then these commands: + +------------ +$ git ls-remote bundle +$ git fetch bundle +$ git pull bundle +------------ + +would treat it as if it is talking with a remote side over the +network. + +Author +------ +Written by Mark Levedahl <mdl123@verizon.net> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt new file mode 100644 index 0000000..df42cb1 --- /dev/null +++ b/Documentation/git-cat-file.txt @@ -0,0 +1,73 @@ +git-cat-file(1) +=============== + +NAME +---- +git-cat-file - Provide content or type/size information for repository objects + + +SYNOPSIS +-------- +'git-cat-file' [-t | -s | -e | -p | <type>] <object> + +DESCRIPTION +----------- +Provides content or type of objects in the repository. The type +is required unless '-t' or '-p' is used to find the object type, +or '-s' is used to find the object size. + +OPTIONS +------- +<object>:: + The name of the object to show. + For a more complete list of ways to spell object names, see + "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + +-t:: + Instead of the content, show the object type identified by + <object>. + +-s:: + Instead of the content, show the object size identified by + <object>. + +-e:: + Suppress all output; instead exit with zero status if <object> + exists and is a valid object. + +-p:: + Pretty-print the contents of <object> based on its type. + +<type>:: + Typically this matches the real type of <object> but asking + for a type that can trivially be dereferenced from the given + <object> is also permitted. An example is to ask for a + "tree" with <object> being a commit object that contains it, + or to ask for a "blob" with <object> being a tag object that + points at it. + +OUTPUT +------ +If '-t' is specified, one of the <type>. + +If '-s' is specified, the size of the <object> in bytes. + +If '-e' is specified, no output. + +If '-p' is specified, the contents of <object> are pretty-printed. + +Otherwise the raw (though uncompressed) contents of the <object> will +be returned. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-check-attr.txt b/Documentation/git-check-attr.txt new file mode 100644 index 0000000..290f10f --- /dev/null +++ b/Documentation/git-check-attr.txt @@ -0,0 +1,41 @@ +git-check-attr(1) +================= + +NAME +---- +git-check-attr - Display gitattributes information. + + +SYNOPSIS +-------- +'git-check-attr' attr... [--] pathname... + +DESCRIPTION +----------- +For every pathname, this command will list if each attr is 'unspecified', +'set', or 'unset' as a gitattribute on that pathname. + +OPTIONS +------- +\--:: + Interpret all preceding arguments as attributes, and all following + arguments as path names. If not supplied, only the first argument will + be treated as an attribute. + + +SEE ALSO +-------- +linkgit:gitattributes[5]. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by James Bowes. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt new file mode 100644 index 0000000..a676880 --- /dev/null +++ b/Documentation/git-check-ref-format.txt @@ -0,0 +1,55 @@ +git-check-ref-format(1) +======================= + +NAME +---- +git-check-ref-format - Make sure ref name is well formed + +SYNOPSIS +-------- +'git-check-ref-format' <refname> + +DESCRIPTION +----------- +Checks if a given 'refname' is acceptable, and exits non-zero if +it is not. + +A reference is used in git to specify branches and tags. A +branch head is stored under `$GIT_DIR/refs/heads` directory, and +a tag is stored under `$GIT_DIR/refs/tags` directory. git +imposes the following rules on how refs are named: + +. It can include slash `/` for hierarchical (directory) + grouping, but no slash-separated component can begin with a + dot `.`; + +. It cannot have two consecutive dots `..` anywhere; + +. It cannot have ASCII control character (i.e. bytes whose + values are lower than \040, or \177 `DEL`), space, tilde `~`, + caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, + or open bracket `[` anywhere; + +. It cannot end with a slash `/`. + +These rules makes it easy for shell script based tools to parse +refnames, pathname expansion by the shell when a refname is used +unquoted (by mistake), and also avoids ambiguities in certain +refname expressions (see linkgit:git-rev-parse[1]). Namely: + +. double-dot `..` are often used as in `ref1..ref2`, and in some + context this notation means `{caret}ref1 ref2` (i.e. not in + ref1 and in ref2). + +. tilde `~` and caret `{caret}` are used to introduce postfix + 'nth parent' and 'peel onion' operation. + +. colon `:` is used as in `srcref:dstref` to mean "use srcref\'s + value and store it in dstref" in fetch and push operations. + It may also be used to select a specific object such as with + linkgit:git-cat-file[1] "git-cat-file blob v1.3.3:refs.c". + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt new file mode 100644 index 0000000..cbbb0b5 --- /dev/null +++ b/Documentation/git-checkout-index.txt @@ -0,0 +1,184 @@ +git-checkout-index(1) +===================== + +NAME +---- +git-checkout-index - Copy files from the index to the working tree + + +SYNOPSIS +-------- +[verse] +'git-checkout-index' [-u] [-q] [-a] [-f] [-n] [--prefix=<string>] + [--stage=<number>|all] + [--temp] + [-z] [--stdin] + [--] [<file>]\* + +DESCRIPTION +----------- +Will copy all files listed from the index to the working directory +(not overwriting existing files). + +OPTIONS +------- +-u|--index:: + update stat information for the checked out entries in + the index file. + +-q|--quiet:: + be quiet if files exist or are not in the index + +-f|--force:: + forces overwrite of existing files + +-a|--all:: + checks out all files in the index. Cannot be used + together with explicit filenames. + +-n|--no-create:: + Don't checkout new files, only refresh files already checked + out. + +--prefix=<string>:: + When creating files, prepend <string> (usually a directory + including a trailing /) + +--stage=<number>|all:: + Instead of checking out unmerged entries, copy out the + files from named stage. <number> must be between 1 and 3. + Note: --stage=all automatically implies --temp. + +--temp:: + Instead of copying the files to the working directory + write the content to temporary files. The temporary name + associations will be written to stdout. + +--stdin:: + Instead of taking list of paths from the command line, + read list of paths from the standard input. Paths are + separated by LF (i.e. one path per line) by default. + +-z:: + Only meaningful with `--stdin`; paths are separated with + NUL character instead of LF. + +\--:: + Do not interpret any more arguments as options. + +The order of the flags used to matter, but not anymore. + +Just doing `git-checkout-index` does nothing. You probably meant +`git-checkout-index -a`. And if you want to force it, you want +`git-checkout-index -f -a`. + +Intuitiveness is not the goal here. Repeatability is. The reason for +the "no arguments means no work" behavior is that from scripts you are +supposed to be able to do: + +---------------- +$ find . -name '*.h' -print0 | xargs -0 git-checkout-index -f -- +---------------- + +which will force all existing `*.h` files to be replaced with their +cached copies. If an empty command line implied "all", then this would +force-refresh everything in the index, which was not the point. But +since git-checkout-index accepts --stdin it would be faster to use: + +---------------- +$ find . -name '*.h' -print0 | git-checkout-index -f -z --stdin +---------------- + +The `--` is just a good idea when you know the rest will be filenames; +it will prevent problems with a filename of, for example, `-a`. +Using `--` is probably a good policy in scripts. + + +Using --temp or --stage=all +--------------------------- +When `--temp` is used (or implied by `--stage=all`) +`git-checkout-index` will create a temporary file for each index +entry being checked out. The index will not be updated with stat +information. These options can be useful if the caller needs all +stages of all unmerged entries so that the unmerged files can be +processed by an external merge tool. + +A listing will be written to stdout providing the association of +temporary file names to tracked path names. The listing format +has two variations: + + . tempname TAB path RS ++ +The first format is what gets used when `--stage` is omitted or +is not `--stage=all`. The field tempname is the temporary file +name holding the file content and path is the tracked path name in +the index. Only the requested entries are output. + + . stage1temp SP stage2temp SP stage3tmp TAB path RS ++ +The second format is what gets used when `--stage=all`. The three +stage temporary fields (stage1temp, stage2temp, stage3temp) list the +name of the temporary file if there is a stage entry in the index +or `.` if there is no stage entry. Paths which only have a stage 0 +entry will always be omitted from the output. + +In both formats RS (the record separator) is newline by default +but will be the null byte if -z was passed on the command line. +The temporary file names are always safe strings; they will never +contain directory separators or whitespace characters. The path +field is always relative to the current directory and the temporary +file names are always relative to the top level directory. + +If the object being copied out to a temporary file is a symbolic +link the content of the link will be written to a normal file. It is +up to the end-user or the Porcelain to make use of this information. + + +EXAMPLES +-------- +To update and refresh only the files already checked out:: ++ +---------------- +$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh +---------------- + +Using `git-checkout-index` to "export an entire tree":: + The prefix ability basically makes it trivial to use + `git-checkout-index` as an "export as tree" function. + Just read the desired tree into the index, and do: ++ +---------------- +$ git-checkout-index --prefix=git-export-dir/ -a +---------------- ++ +`git-checkout-index` will "export" the index into the specified +directory. ++ +The final "/" is important. The exported name is literally just +prefixed with the specified string. Contrast this with the +following example. + +Export files with a prefix:: ++ +---------------- +$ git-checkout-index --prefix=.merged- Makefile +---------------- ++ +This will check out the currently cached copy of `Makefile` +into the file `.merged-Makefile`. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + + +Documentation +-------------- +Documentation by David Greaves, +Junio C Hamano and the git-list <git@vger.kernel.org>. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt new file mode 100644 index 0000000..b4cfa04 --- /dev/null +++ b/Documentation/git-checkout.txt @@ -0,0 +1,220 @@ +git-checkout(1) +=============== + +NAME +---- +git-checkout - Checkout and switch to a branch + +SYNOPSIS +-------- +[verse] +'git-checkout' [-q] [-f] [[--track | --no-track] -b <new_branch> [-l]] [-m] [<branch>] +'git-checkout' [<tree-ish>] <paths>... + +DESCRIPTION +----------- + +When <paths> are not given, this command switches branches by +updating the index and working tree to reflect the specified +branch, <branch>, and updating HEAD to be <branch> or, if +specified, <new_branch>. Using -b will cause <new_branch> to +be created; in this case you can use the --track or --no-track +options, which will be passed to `git branch`. + +When <paths> are given, this command does *not* switch +branches. It updates the named paths in the working tree from +the index file (i.e. it runs `git-checkout-index -f -u`), or +from a named commit. In +this case, the `-f` and `-b` options are meaningless and giving +either of them results in an error. <tree-ish> argument can be +used to specify a specific tree-ish (i.e. commit, tag or tree) +to update the index for the given paths before updating the +working tree. + + +OPTIONS +------- +-q:: + Quiet, suppress feedback messages. + +-f:: + Proceed even if the index or the working tree differs + from HEAD. This is used to throw away local changes. + +-b:: + Create a new branch named <new_branch> and start it at + <branch>. The new branch name must pass all checks defined + by linkgit:git-check-ref-format[1]. Some of these checks + may restrict the characters allowed in a branch name. + +--track:: + When -b is given and a branch is created off a remote branch, + set up configuration so that git-pull will automatically + retrieve data from the remote branch. Use this if you always + pull from the same remote branch into the new branch, or if you + don't want to use "git pull <repository> <refspec>" explicitly. + This behavior is the default. Set the + branch.autosetupmerge configuration variable to false if you + want git-checkout and git-branch to always behave as if + '--no-track' were given. + +--no-track:: + When -b is given and a branch is created off a remote branch, + set up configuration so that git-pull will not retrieve data + from the remote branch, ignoring the branch.autosetupmerge + configuration variable. + +-l:: + Create the new branch's reflog. This activates recording of + all changes made to the branch ref, enabling use of date + based sha1 expressions such as "<branchname>@\{yesterday}". + +-m:: + If you have local modifications to one or more files that + are different between the current branch and the branch to + which you are switching, the command refuses to switch + branches in order to preserve your modifications in context. + However, with this option, a three-way merge between the current + branch, your working tree contents, and the new branch + is done, and you will be on the new branch. ++ +When a merge conflict happens, the index entries for conflicting +paths are left unmerged, and you need to resolve the conflicts +and mark the resolved paths with `git add` (or `git rm` if the merge +should result in deletion of the path). + +<new_branch>:: + Name for the new branch. + +<branch>:: + Branch to checkout; may be any object ID that resolves to a + commit. Defaults to HEAD. ++ +When this parameter names a non-branch (but still a valid commit object), +your HEAD becomes 'detached'. + + +Detached HEAD +------------- + +It is sometimes useful to be able to 'checkout' a commit that is +not at the tip of one of your branches. The most obvious +example is to check out the commit at a tagged official release +point, like this: + +------------ +$ git checkout v2.6.18 +------------ + +Earlier versions of git did not allow this and asked you to +create a temporary branch using `-b` option, but starting from +version 1.5.0, the above command 'detaches' your HEAD from the +current branch and directly point at the commit named by the tag +(`v2.6.18` in the above example). + +You can use usual git commands while in this state. You can use +`git-reset --hard $othercommit` to further move around, for +example. You can make changes and create a new commit on top of +a detached HEAD. You can even create a merge by using `git +merge $othercommit`. + +The state you are in while your HEAD is detached is not recorded +by any branch (which is natural --- you are not on any branch). +What this means is that you can discard your temporary commits +and merges by switching back to an existing branch (e.g. `git +checkout master`), and a later `git prune` or `git gc` would +garbage-collect them. If you did this by mistake, you can ask +the reflog for HEAD where you were, e.g. + +------------ +$ git log -g -2 HEAD +------------ + + +EXAMPLES +-------- + +. The following sequence checks out the `master` branch, reverts +the `Makefile` to two revisions back, deletes hello.c by +mistake, and gets it back from the index. ++ +------------ +$ git checkout master <1> +$ git checkout master~2 Makefile <2> +$ rm -f hello.c +$ git checkout hello.c <3> +------------ ++ +<1> switch branch +<2> take out a file out of other commit +<3> restore hello.c from HEAD of current branch ++ +If you have an unfortunate branch that is named `hello.c`, this +step would be confused as an instruction to switch to that branch. +You should instead write: ++ +------------ +$ git checkout -- hello.c +------------ + +. After working in a wrong branch, switching to the correct +branch would be done using: ++ +------------ +$ git checkout mytopic +------------ ++ +However, your "wrong" branch and correct "mytopic" branch may +differ in files that you have locally modified, in which case, +the above checkout would fail like this: ++ +------------ +$ git checkout mytopic +fatal: Entry 'frotz' not uptodate. Cannot merge. +------------ ++ +You can give the `-m` flag to the command, which would try a +three-way merge: ++ +------------ +$ git checkout -m mytopic +Auto-merging frotz +------------ ++ +After this three-way merge, the local modifications are _not_ +registered in your index file, so `git diff` would show you what +changes you made since the tip of the new branch. + +. When a merge conflict happens during switching branches with +the `-m` option, you would see something like this: ++ +------------ +$ git checkout -m mytopic +Auto-merging frotz +merge: warning: conflicts during merge +ERROR: Merge conflict in frotz +fatal: merge program failed +------------ ++ +At this point, `git diff` shows the changes cleanly merged as in +the previous example, as well as the changes in the conflicted +files. Edit and resolve the conflict and mark it resolved with +`git add` as usual: ++ +------------ +$ edit frotz +$ git add frotz +------------ + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt new file mode 100644 index 0000000..f0beb41 --- /dev/null +++ b/Documentation/git-cherry-pick.txt @@ -0,0 +1,78 @@ +git-cherry-pick(1) +================== + +NAME +---- +git-cherry-pick - Apply the change introduced by an existing commit + +SYNOPSIS +-------- +'git-cherry-pick' [--edit] [-n] [-m parent-number] [-x] <commit> + +DESCRIPTION +----------- +Given one existing commit, apply the change the patch introduces, and record a +new commit that records it. This requires your working tree to be clean (no +modifications from the HEAD commit). + +OPTIONS +------- +<commit>:: + Commit to cherry-pick. + For a more complete list of ways to spell commits, see + "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + +-e|--edit:: + With this option, `git-cherry-pick` will let you edit the commit + message prior to committing. + +-x:: + When recording the commit, append to the original commit + message a note that indicates which commit this change + was cherry-picked from. Append the note only for cherry + picks without conflicts. Do not use this option if + you are cherry-picking from your private branch because + the information is useless to the recipient. If on the + other hand you are cherry-picking between two publicly + visible branches (e.g. backporting a fix to a + maintenance branch for an older release from a + development branch), adding this information can be + useful. + +-r:: + It used to be that the command defaulted to do `-x` + described above, and `-r` was to disable it. Now the + default is not to do `-x` so this option is a no-op. + +-m parent-number|--mainline parent-number:: + Usually you cannot cherry-pick a merge because you do not know which + side of the merge should be considered the mainline. This + option specifies the parent number (starting from 1) of + the mainline and allows cherry-pick to replay the change + relative to the specified parent. + +-n|--no-commit:: + Usually the command automatically creates a commit with + a commit log message stating which commit was + cherry-picked. This flag applies the change necessary + to cherry-pick the named commit to your working tree, + but does not make the commit. In addition, when this + option is used, your working tree does not have to match + the HEAD commit. The cherry-pick is done against the + beginning state of your working tree. ++ +This is useful when cherry-picking more than one commits' +effect to your working tree in a row. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cherry.txt b/Documentation/git-cherry.txt new file mode 100644 index 0000000..b0468aa --- /dev/null +++ b/Documentation/git-cherry.txt @@ -0,0 +1,69 @@ +git-cherry(1) +============= + +NAME +---- +git-cherry - Find commits not merged upstream + +SYNOPSIS +-------- +'git-cherry' [-v] <upstream> [<head>] [<limit>] + +DESCRIPTION +----------- +The changeset (or "diff") of each commit between the fork-point and <head> +is compared against each commit between the fork-point and <upstream>. + +Every commit that doesn't exist in the <upstream> branch +has its id (sha1) reported, prefixed by a symbol. The ones that have +equivalent change already +in the <upstream> branch are prefixed with a minus (-) sign, and those +that only exist in the <head> branch are prefixed with a plus (+) symbol: + + __*__*__*__*__> <upstream> + / + fork-point + \__+__+__-__+__+__-__+__> <head> + + +If a <limit> has been given then the commits along the <head> branch up +to and including <limit> are not reported: + + __*__*__*__*__> <upstream> + / + fork-point + \__*__*__<limit>__-__+__> <head> + + +Because git-cherry compares the changeset rather than the commit id +(sha1), you can use git-cherry to find out if a commit you made locally +has been applied <upstream> under a different commit id. For example, +this will happen if you're feeding patches <upstream> via email rather +than pushing or pulling commits directly. + + +OPTIONS +------- +-v:: + Verbose. + +<upstream>:: + Upstream branch to compare against. + +<head>:: + Working branch; defaults to HEAD. + +<limit>:: + Do not report commits up to (and including) limit. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-citool.txt b/Documentation/git-citool.txt new file mode 100644 index 0000000..aca1d75 --- /dev/null +++ b/Documentation/git-citool.txt @@ -0,0 +1,32 @@ +git-citool(1) +============= + +NAME +---- +git-citool - Graphical alternative to git-commit + +SYNOPSIS +-------- +'git citool' + +DESCRIPTION +----------- +A Tcl/Tk based graphical interface to review modified files, stage +them into the index, enter a commit message and record the new +commit onto the current branch. This interface is an alternative +to the less interactive linkgit:git-commit[1] program. + +git-citool is actually a standard alias for 'git gui citool'. +See linkgit:git-gui[1] for more details. + +Author +------ +Written by Shawn O. Pearce <spearce@spearce.org>. + +Documentation +-------------- +Documentation by Shawn O. Pearce <spearce@spearce.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt new file mode 100644 index 0000000..5e9da03 --- /dev/null +++ b/Documentation/git-clean.txt @@ -0,0 +1,57 @@ +git-clean(1) +============ + +NAME +---- +git-clean - Remove untracked files from the working tree + +SYNOPSIS +-------- +[verse] +'git-clean' [-d] [-f] [-n] [-q] [-x | -X] [--] <paths>... + +DESCRIPTION +----------- +Removes files unknown to git. This allows to clean the working tree +from files that are not under version control. If the '-x' option is +specified, ignored files are also removed, allowing to remove all +build products. +When optional `<paths>...` arguments are given, the paths +affected are further limited to those that match them. + + +OPTIONS +------- +-d:: + Remove untracked directories in addition to untracked files. + +-f:: + If the git configuration specifies clean.requireForce as true, + git-clean will refuse to run unless given -f or -n. + +-n:: + Don't actually remove anything, just show what would be done. + +-q:: + Be quiet, only report errors, but not the files that are + successfully removed. + +-x:: + Don't use the ignore rules. This allows removing all untracked + files, including build products. This can be used (possibly in + conjunction with linkgit:git-reset[1]) to create a pristine + working directory to test a clean build. + +-X:: + Remove only files ignored by git. This may be useful to rebuild + everything from scratch, but keep manually created files. + + +Author +------ +Written by Pavel Roskin <proski@gnu.org> + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt new file mode 100644 index 0000000..9758243 --- /dev/null +++ b/Documentation/git-clone.txt @@ -0,0 +1,203 @@ +git-clone(1) +============ + +NAME +---- +git-clone - Clone a repository into a new directory + + +SYNOPSIS +-------- +[verse] +'git-clone' [--template=<template_directory>] + [-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] + [-o <name>] [-u <upload-pack>] [--reference <repository>] + [--depth <depth>] [--] <repository> [<directory>] + +DESCRIPTION +----------- + +Clones a repository into a newly created directory, creates +remote-tracking branches for each branch in the cloned repository +(visible using `git branch -r`), and creates and checks out an initial +branch equal to the cloned repository's currently active branch. + +After the clone, a plain `git fetch` without arguments will update +all the remote-tracking branches, and a `git pull` without +arguments will in addition merge the remote master branch into the +current master branch, if any. + +This default configuration is achieved by creating references to +the remote branch heads under `$GIT_DIR/refs/remotes/origin` and +by initializing `remote.origin.url` and `remote.origin.fetch` +configuration variables. + + +OPTIONS +------- +--local:: +-l:: + When the repository to clone from is on a local machine, + this flag bypasses normal "git aware" transport + mechanism and clones the repository by making a copy of + HEAD and everything under objects and refs directories. + The files under `.git/objects/` directory are hardlinked + to save space when possible. This is now the default when + the source repository is specified with `/path/to/repo` + syntax, so it essentially is a no-op option. To force + copying instead of hardlinking (which may be desirable + if you are trying to make a back-up of your repository), + but still avoid the usual "git aware" transport + mechanism, `--no-hardlinks` can be used. + +--no-hardlinks:: + Optimize the cloning process from a repository on a + local filesystem by copying files under `.git/objects` + directory. + +--shared:: +-s:: + When the repository to clone is on the local machine, + instead of using hard links, automatically setup + .git/objects/info/alternates to share the objects + with the source repository. The resulting repository + starts out without any object of its own. ++ +*NOTE*: this is a possibly dangerous operation; do *not* use +it unless you understand what it does. If you clone your +repository using this option, then delete branches in the +source repository and then run linkgit:git-gc[1] using the +'--prune' option in the source repository, it may remove +objects which are referenced by the cloned repository. + + + +--reference <repository>:: + If the reference repository is on the local machine + automatically setup .git/objects/info/alternates to + obtain objects from the reference repository. Using + an already existing repository as an alternate will + require fewer objects to be copied from the repository + being cloned, reducing network and local storage costs. + +--quiet:: +-q:: + Operate quietly. This flag is passed to "rsync" and + "git-fetch-pack" commands when given. + +--no-checkout:: +-n:: + No checkout of HEAD is performed after the clone is complete. + +--bare:: + Make a 'bare' GIT repository. That is, instead of + creating `<directory>` and placing the administrative + files in `<directory>/.git`, make the `<directory>` + itself the `$GIT_DIR`. This obviously implies the `-n` + because there is nowhere to check out the working tree. + Also the branch heads at the remote are copied directly + to corresponding local branch heads, without mapping + them to `refs/remotes/origin/`. When this option is + used, neither remote-tracking branches nor the related + configuration variables are created. + +--origin <name>:: +-o <name>:: + Instead of using the remote name 'origin' to keep track + of the upstream repository, use <name> instead. + +--upload-pack <upload-pack>:: +-u <upload-pack>:: + When given, and the repository to clone from is handled + by 'git-fetch-pack', '--exec=<upload-pack>' is passed to + the command to specify non-default path for the command + run on the other end. + +--template=<template_directory>:: + Specify the directory from which templates will be used; + if unset the templates are taken from the installation + defined default, typically `/usr/share/git-core/templates`. + +--depth <depth>:: + Create a 'shallow' clone with a history truncated to the + specified number of revisions. A shallow repository has a + number of limitations (you cannot clone or fetch from + it, nor push from nor into it), but is adequate if you + are only interested in the recent history of a large project + with a long history, and would want to send in fixes + as patches. + +<repository>:: + The (possibly remote) repository to clone from. See the + <<URLS,URLS>> section below for more information on specifying + repositories. + +<directory>:: + The name of a new directory to clone into. The "humanish" + part of the source repository is used if no directory is + explicitly given ("repo" for "/path/to/repo.git" and "foo" + for "host.xz:foo/.git"). Cloning into an existing directory + is not allowed. + +:git-clone: 1 +include::urls.txt[] + +Examples +-------- + +Clone from upstream:: ++ +------------ +$ git clone git://git.kernel.org/pub/scm/.../linux-2.6 my2.6 +$ cd my2.6 +$ make +------------ + + +Make a local clone that borrows from the current directory, without checking things out:: ++ +------------ +$ git clone -l -s -n . ../copy +$ cd ../copy +$ git show-branch +------------ + + +Clone from upstream while borrowing from an existing local directory:: ++ +------------ +$ git clone --reference my2.6 \ + git://git.kernel.org/pub/scm/.../linux-2.7 \ + my2.7 +$ cd my2.7 +------------ + + +Create a bare repository to publish your changes to the public:: ++ +------------ +$ git clone --bare -l /home/proj/.git /pub/scm/proj.git +------------ + + +Create a repository on the kernel.org machine that borrows from Linus:: ++ +------------ +$ git clone --bare -l -s /pub/scm/.../torvalds/linux-2.6.git \ + /pub/scm/.../me/subsys-2.6.git +------------ + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt new file mode 100644 index 0000000..170803a --- /dev/null +++ b/Documentation/git-commit-tree.txt @@ -0,0 +1,106 @@ +git-commit-tree(1) +================== + +NAME +---- +git-commit-tree - Create a new commit object + + +SYNOPSIS +-------- +'git-commit-tree' <tree> [-p <parent commit>]\* < changelog + +DESCRIPTION +----------- +This is usually not what an end user wants to run directly. See +linkgit:git-commit[1] instead. + +Creates a new commit object based on the provided tree object and +emits the new commit object id on stdout. If no parent is given then +it is considered to be an initial tree. + +A commit object usually has 1 parent (a commit after a change) or up +to 16 parents. More than one parent represents a merge of branches +that led to them. + +While a tree represents a particular directory state of a working +directory, a commit represents that state in "time", and explains how +to get there. + +Normally a commit would identify a new "HEAD" state, and while git +doesn't care where you save the note about that state, in practice we +tend to just write the result to the file that is pointed at by +`.git/HEAD`, so that we can always see what the last committed +state was. + +OPTIONS +------- +<tree>:: + An existing tree object + +-p <parent commit>:: + Each '-p' indicates the id of a parent commit object. + + +Commit Information +------------------ + +A commit encapsulates: + +- all parent object ids +- author name, email and date +- committer name and email and the commit time. + +While parent object ids are provided on the command line, author and +committer information is taken from the following environment variables, +if set: + + GIT_AUTHOR_NAME + GIT_AUTHOR_EMAIL + GIT_AUTHOR_DATE + GIT_COMMITTER_NAME + GIT_COMMITTER_EMAIL + GIT_COMMITTER_DATE + EMAIL + +(nb "<", ">" and "\n"s are stripped) + +In case (some of) these environment variables are not set, the information +is taken from the configuration items user.name and user.email, or, if not +present, system user name and fully qualified hostname. + +A commit comment is read from stdin. If a changelog +entry is not provided via "<" redirection, "git-commit-tree" will just wait +for one to be entered and terminated with ^D. + + +Diagnostics +----------- +You don't exist. Go away!:: + The passwd(5) gecos field couldn't be read +Your parents must have hated you!:: + The password(5) gecos field is longer than a giant static buffer. +Your sysadmin must hate you!:: + The password(5) name field is longer than a giant static buffer. + +Discussion +---------- + +include::i18n.txt[] + +See Also +-------- +linkgit:git-write-tree[1] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt new file mode 100644 index 0000000..c3725b2 --- /dev/null +++ b/Documentation/git-commit.txt @@ -0,0 +1,304 @@ +git-commit(1) +============= + +NAME +---- +git-commit - Record changes to the repository + +SYNOPSIS +-------- +[verse] +'git-commit' [-a | --interactive] [-s] [-v] [-u] + [(-c | -C) <commit> | -F <file> | -m <msg> | --amend] + [--allow-empty] [--no-verify] [-e] [--author <author>] + [--cleanup=<mode>] [--] [[-i | -o ]<file>...] + +DESCRIPTION +----------- +Use 'git commit' to store the current contents of the index in a new +commit along with a log message describing the changes you have made. + +The content to be added can be specified in several ways: + +1. by using linkgit:git-add[1] to incrementally "add" changes to the + index before using the 'commit' command (Note: even modified + files must be "added"); + +2. by using linkgit:git-rm[1] to remove files from the working tree + and the index, again before using the 'commit' command; + +3. by listing files as arguments to the 'commit' command, in which + case the commit will ignore changes staged in the index, and instead + record the current content of the listed files; + +4. by using the -a switch with the 'commit' command to automatically + "add" changes from all known files (i.e. all files that are already + listed in the index) and to automatically "rm" files in the index + that have been removed from the working tree, and then perform the + actual commit; + +5. by using the --interactive switch with the 'commit' command to decide one + by one which files should be part of the commit, before finalizing the + operation. Currently, this is done by invoking `git-add --interactive`. + +The linkgit:git-status[1] command can be used to obtain a +summary of what is included by any of the above for the next +commit by giving the same set of parameters you would give to +this command. + +If you make a commit and then found a mistake immediately after +that, you can recover from it with linkgit:git-reset[1]. + + +OPTIONS +------- +-a|--all:: + Tell the command to automatically stage files that have + been modified and deleted, but new files you have not + told git about are not affected. + +-c or -C <commit>:: + Take existing commit object, and reuse the log message + and the authorship information (including the timestamp) + when creating the commit. With '-C', the editor is not + invoked; with '-c' the user can further edit the commit + message. + +-F <file>:: + Take the commit message from the given file. Use '-' to + read the message from the standard input. + +--author <author>:: + Override the author name used in the commit. Use + `A U Thor <author@example.com>` format. + +-m <msg>|--message=<msg>:: + Use the given <msg> as the commit message. + +-t <file>|--template=<file>:: + Use the contents of the given file as the initial version + of the commit message. The editor is invoked and you can + make subsequent changes. If a message is specified using + the `-m` or `-F` options, this option has no effect. This + overrides the `commit.template` configuration variable. + +-s|--signoff:: + Add Signed-off-by line at the end of the commit message. + +--no-verify:: + This option bypasses the pre-commit and commit-msg hooks. + See also link:hooks.html[hooks]. + +--allow-empty:: + Usually recording a commit that has the exact same tree as its + sole parent commit is a mistake, and the command prevents you + from making such a commit. This option bypasses the safety, and + is primarily for use by foreign scm interface scripts. + +--cleanup=<mode>:: + This option sets how the commit message is cleaned up. + The '<mode>' can be one of 'verbatim', 'whitespace', 'strip', + and 'default'. The 'default' mode will strip leading and + trailing empty lines and #commentary from the commit message + only if the message is to be edited. Otherwise only whitespace + removed. The 'verbatim' mode does not change message at all, + 'whitespace' removes just leading/trailing whitespace lines + and 'strip' removes both whitespace and commentary. + +-e|--edit:: + The message taken from file with `-F`, command line with + `-m`, and from file with `-C` are usually used as the + commit log message unmodified. This option lets you + further edit the message taken from these sources. + +--amend:: + + Used to amend the tip of the current branch. Prepare the tree + object you would want to replace the latest commit as usual + (this includes the usual -i/-o and explicit paths), and the + commit log editor is seeded with the commit message from the + tip of the current branch. The commit you create replaces the + current tip -- if it was a merge, it will have the parents of + the current tip as parents -- so the current top commit is + discarded. ++ +-- +It is a rough equivalent for: +------ + $ git reset --soft HEAD^ + $ ... do something else to come up with the right tree ... + $ git commit -c ORIG_HEAD + +------ +but can be used to amend a merge commit. +-- + +-i|--include:: + Before making a commit out of staged contents so far, + stage the contents of paths given on the command line + as well. This is usually not what you want unless you + are concluding a conflicted merge. + +-u|--untracked-files:: + Show all untracked files, also those in uninteresting + directories, in the "Untracked files:" section of commit + message template. Without this option only its name and + a trailing slash are displayed for each untracked + directory. + +-v|--verbose:: + Show unified diff between the HEAD commit and what + would be committed at the bottom of the commit message + template. Note that this diff output doesn't have its + lines prefixed with '#'. + +-q|--quiet:: + Suppress commit summary message. + +\--:: + Do not interpret any more arguments as options. + +<file>...:: + When files are given on the command line, the command + commits the contents of the named files, without + recording the changes already staged. The contents of + these files are also staged for the next commit on top + of what have been staged before. + + +EXAMPLES +-------- +When recording your own work, the contents of modified files in +your working tree are temporarily stored to a staging area +called the "index" with linkgit:git-add[1]. A file can be +reverted back, only in the index but not in the working tree, +to that of the last commit with `git-reset HEAD -- <file>`, +which effectively reverts `git-add` and prevents the changes to +this file from participating in the next commit. After building +the state to be committed incrementally with these commands, +`git commit` (without any pathname parameter) is used to record what +has been staged so far. This is the most basic form of the +command. An example: + +------------ +$ edit hello.c +$ git rm goodbye.c +$ git add hello.c +$ git commit +------------ + +Instead of staging files after each individual change, you can +tell `git commit` to notice the changes to the files whose +contents are tracked in +your working tree and do corresponding `git add` and `git rm` +for you. That is, this example does the same as the earlier +example if there is no other change in your working tree: + +------------ +$ edit hello.c +$ rm goodbye.c +$ git commit -a +------------ + +The command `git commit -a` first looks at your working tree, +notices that you have modified hello.c and removed goodbye.c, +and performs necessary `git add` and `git rm` for you. + +After staging changes to many files, you can alter the order the +changes are recorded in, by giving pathnames to `git commit`. +When pathnames are given, the command makes a commit that +only records the changes made to the named paths: + +------------ +$ edit hello.c hello.h +$ git add hello.c hello.h +$ edit Makefile +$ git commit Makefile +------------ + +This makes a commit that records the modification to `Makefile`. +The changes staged for `hello.c` and `hello.h` are not included +in the resulting commit. However, their changes are not lost -- +they are still staged and merely held back. After the above +sequence, if you do: + +------------ +$ git commit +------------ + +this second commit would record the changes to `hello.c` and +`hello.h` as expected. + +After a merge (initiated by either linkgit:git-merge[1] or +linkgit:git-pull[1]) stops because of conflicts, cleanly merged +paths are already staged to be committed for you, and paths that +conflicted are left in unmerged state. You would have to first +check which paths are conflicting with linkgit:git-status[1] +and after fixing them manually in your working tree, you would +stage the result as usual with linkgit:git-add[1]: + +------------ +$ git status | grep unmerged +unmerged: hello.c +$ edit hello.c +$ git add hello.c +------------ + +After resolving conflicts and staging the result, `git ls-files -u` +would stop mentioning the conflicted path. When you are done, +run `git commit` to finally record the merge: + +------------ +$ git commit +------------ + +As with the case to record your own changes, you can use `-a` +option to save typing. One difference is that during a merge +resolution, you cannot use `git commit` with pathnames to +alter the order the changes are committed, because the merge +should be recorded as a single commit. In fact, the command +refuses to run when given pathnames (but see `-i` option). + + +DISCUSSION +---------- + +Though not required, it's a good idea to begin the commit message +with a single short (less than 50 character) line summarizing the +change, followed by a blank line and then a more thorough description. +Tools that turn commits into email, for example, use the first line +on the Subject: line and the rest of the commit in the body. + +include::i18n.txt[] + +ENVIRONMENT AND CONFIGURATION VARIABLES +--------------------------------------- +The editor used to edit the commit log message will be chosen from the +GIT_EDITOR environment variable, the core.editor configuration variable, the +VISUAL environment variable, or the EDITOR environment variable (in that +order). + +HOOKS +----- +This command can run `commit-msg`, `pre-commit`, and +`post-commit` hooks. See link:hooks.html[hooks] for more +information. + + +SEE ALSO +-------- +linkgit:git-add[1], +linkgit:git-rm[1], +linkgit:git-mv[1], +linkgit:git-merge[1], +linkgit:git-commit-tree[1] + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net> + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt new file mode 100644 index 0000000..fa16171 --- /dev/null +++ b/Documentation/git-config.txt @@ -0,0 +1,335 @@ +git-config(1) +============= + +NAME +---- +git-config - Get and set repository or global options + + +SYNOPSIS +-------- +[verse] +'git-config' [<file-option>] [type] [-z|--null] name [value [value_regex]] +'git-config' [<file-option>] [type] --add name value +'git-config' [<file-option>] [type] --replace-all name [value [value_regex]] +'git-config' [<file-option>] [type] [-z|--null] --get name [value_regex] +'git-config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] +'git-config' [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex] +'git-config' [<file-option>] --unset name [value_regex] +'git-config' [<file-option>] --unset-all name [value_regex] +'git-config' [<file-option>] --rename-section old_name new_name +'git-config' [<file-option>] --remove-section name +'git-config' [<file-option>] [-z|--null] -l | --list +'git-config' [<file-option>] --get-color name [default] +'git-config' [<file-option>] --get-colorbool name [stdout-is-tty] + +DESCRIPTION +----------- +You can query/set/replace/unset options with this command. The name is +actually the section and the key separated by a dot, and the value will be +escaped. + +Multiple lines can be added to an option by using the '--add' option. +If you want to update or unset an option which can occur on multiple +lines, a POSIX regexp `value_regex` needs to be given. Only the +existing values that match the regexp are updated or unset. If +you want to handle the lines that do *not* match the regex, just +prepend a single exclamation mark in front (see also <<EXAMPLES>>). + +The type specifier can be either '--int' or '--bool', which will make +'git-config' ensure that the variable(s) are of the given type and +convert the value to the canonical form (simple decimal number for int, +a "true" or "false" string for bool). If no type specifier is passed, +no checks or transformations are performed on the value. + +The file-option can be one of '--system', '--global' or '--file' +which specify where the values will be read from or written to. +The default is to assume the config file of the current repository, +.git/config unless defined otherwise with GIT_DIR and GIT_CONFIG +(see <<FILES>>). + +This command will fail if: + +. The config file is invalid, +. Can not write to the config file, +. no section was provided, +. the section or key is invalid, +. you try to unset an option which does not exist, +. you try to unset/set an option for which multiple lines match, or +. you use '--global' option without $HOME being properly set. + + +OPTIONS +------- + +--replace-all:: + Default behavior is to replace at most one line. This replaces + all lines matching the key (and optionally the value_regex). + +--add:: + Adds a new line to the option without altering any existing + values. This is the same as providing '^$' as the value_regex. + +--get:: + Get the value for a given key (optionally filtered by a regex + matching the value). Returns error code 1 if the key was not + found and error code 2 if multiple key values were found. + +--get-all:: + Like get, but does not fail if the number of values for the key + is not exactly one. + +--get-regexp:: + Like --get-all, but interprets the name as a regular expression. + Also outputs the key names. + +--global:: + For writing options: write to global ~/.gitconfig file rather than + the repository .git/config. ++ +For reading options: read only from global ~/.gitconfig rather than +from all available files. ++ +See also <<FILES>>. + +--system:: + For writing options: write to system-wide $(prefix)/etc/gitconfig + rather than the repository .git/config. ++ +For reading options: read only from system-wide $(prefix)/etc/gitconfig +rather than from all available files. ++ +See also <<FILES>>. + +-f config-file, --file config-file:: + Use the given config file instead of the one specified by GIT_CONFIG. + +--remove-section:: + Remove the given section from the configuration file. + +--rename-section:: + Rename the given section to a new name. + +--unset:: + Remove the line matching the key from config file. + +--unset-all:: + Remove all lines matching the key from config file. + +-l, --list:: + List all variables set in config file. + +--bool:: + git-config will ensure that the output is "true" or "false" + +--int:: + git-config will ensure that the output is a simple + decimal number. An optional value suffix of 'k', 'm', or 'g' + in the config file will cause the value to be multiplied + by 1024, 1048576, or 1073741824 prior to output. + +-z, --null:: + For all options that output values and/or keys, always + end values with the null character (instead of a + newline). Use newline instead as a delimiter between + key and value. This allows for secure parsing of the + output without getting confused e.g. by values that + contain line breaks. + +--get-colorbool name [stdout-is-tty]:: + + Find the color setting for `name` (e.g. `color.diff`) and output + "true" or "false". `stdout-is-tty` should be either "true" or + "false", and is taken into account when configuration says + "auto". If `stdout-is-tty` is missing, then checks the standard + output of the command itself, and exits with status 0 if color + is to be used, or exits with status 1 otherwise. + +--get-color name default:: + + Find the color configured for `name` (e.g. `color.diff.new`) and + output it as the ANSI color escape sequence to the standard + output. The optional `default` parameter is used instead, if + there is no color configured for `name`. + +[[FILES]] +FILES +----- + +If not set explicitly with '--file', there are three files where +git-config will search for configuration options: + +$GIT_DIR/config:: + Repository specific configuration file. (The filename is + of course relative to the repository root, not the working + directory.) + +~/.gitconfig:: + User-specific configuration file. Also called "global" + configuration file. + +$(prefix)/etc/gitconfig:: + System-wide configuration file. + +If no further options are given, all reading options will read all of these +files that are available. If the global or the system-wide configuration +file are not available they will be ignored. If the repository configuration +file is not available or readable, git-config will exit with a non-zero +error code. However, in neither case will an error message be issued. + +All writing options will per default write to the repository specific +configuration file. Note that this also affects options like '--replace-all' +and '--unset'. *git-config will only ever change one file at a time*. + +You can override these rules either by command line options or by environment +variables. The '--global' and the '--system' options will limit the file used +to the global or system-wide file respectively. The GIT_CONFIG environment +variable has a similar effect, but you can specify any filename you want. + +The GIT_CONFIG_LOCAL environment variable on the other hand only changes +the name used instead of the repository configuration file. The global and +the system-wide configuration files will still be read. (For writing options +this will obviously result in the same behavior as using GIT_CONFIG.) + + +ENVIRONMENT +----------- + +GIT_CONFIG:: + Take the configuration from the given file instead of .git/config. + Using the "--global" option forces this to ~/.gitconfig. Using the + "--system" option forces this to $(prefix)/etc/gitconfig. + +GIT_CONFIG_LOCAL:: + Take the configuration from the given file instead if .git/config. + Still read the global and the system-wide configuration files, though. + +See also <<FILES>>. + + +[[EXAMPLES]] +EXAMPLES +-------- + +Given a .git/config like this: + + # + # This is the config file, and + # a '#' or ';' character indicates + # a comment + # + + ; core variables + [core] + ; Don't trust file modes + filemode = false + + ; Our diff algorithm + [diff] + external = "/usr/local/bin/gnu-diff -u" + renames = true + + ; Proxy settings + [core] + gitproxy="proxy-command" for kernel.org + gitproxy=default-proxy ; for all the rest + +you can set the filemode to true with + +------------ +% git config core.filemode true +------------ + +The hypothetical proxy command entries actually have a postfix to discern +what URL they apply to. Here is how to change the entry for kernel.org +to "ssh". + +------------ +% git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$' +------------ + +This makes sure that only the key/value pair for kernel.org is replaced. + +To delete the entry for renames, do + +------------ +% git config --unset diff.renames +------------ + +If you want to delete an entry for a multivar (like core.gitproxy above), +you have to provide a regex matching the value of exactly one line. + +To query the value for a given key, do + +------------ +% git config --get core.filemode +------------ + +or + +------------ +% git config core.filemode +------------ + +or, to query a multivar: + +------------ +% git config --get core.gitproxy "for kernel.org$" +------------ + +If you want to know all the values for a multivar, do: + +------------ +% git config --get-all core.gitproxy +------------ + +If you like to live dangerous, you can replace *all* core.gitproxy by a +new one with + +------------ +% git config --replace-all core.gitproxy ssh +------------ + +However, if you really only want to replace the line for the default proxy, +i.e. the one without a "for ..." postfix, do something like this: + +------------ +% git config core.gitproxy ssh '! for ' +------------ + +To actually match only values with an exclamation mark, you have to + +------------ +% git config section.key value '[!]' +------------ + +To add a new proxy, without altering any of the existing ones, use + +------------ +% git config core.gitproxy '"proxy-command" for example.com' +------------ + +An example to use customized color from the configuration in your +script: + +------------ +#!/bin/sh +WS=$(git config --get-color color.diff.whitespace "blue reverse") +RESET=$(git config --get-color "" "reset") +echo "${WS}your whitespace color or blue reverse${RESET}" +------------ + +include::config.txt[] + + +Author +------ +Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> + +Documentation +-------------- +Documentation by Johannes Schindelin, Petr Baudis and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt new file mode 100644 index 0000000..7fb08e9 --- /dev/null +++ b/Documentation/git-count-objects.txt @@ -0,0 +1,37 @@ +git-count-objects(1) +==================== + +NAME +---- +git-count-objects - Count unpacked number of objects and their disk consumption + +SYNOPSIS +-------- +'git-count-objects' [-v] + +DESCRIPTION +----------- +This counts the number of unpacked object files and disk space consumed by +them, to help you decide when it is a good time to repack. + + +OPTIONS +------- +-v:: + In addition to the number of loose objects and disk + space consumed, it reports the number of in-pack + objects, number of packs, and number of objects that can be + removed by running `git-prune-packed`. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cvsexportcommit.txt b/Documentation/git-cvsexportcommit.txt new file mode 100644 index 0000000..9a47b4c --- /dev/null +++ b/Documentation/git-cvsexportcommit.txt @@ -0,0 +1,109 @@ +git-cvsexportcommit(1) +====================== + +NAME +---- +git-cvsexportcommit - Export a single commit to a CVS checkout + + +SYNOPSIS +-------- +'git-cvsexportcommit' [-h] [-u] [-v] [-c] [-P] [-p] [-a] [-d cvsroot] [-w cvsworkdir] [-f] [-m msgprefix] [PARENTCOMMIT] COMMITID + + +DESCRIPTION +----------- +Exports a commit from GIT to a CVS checkout, making it easier +to merge patches from a git repository into a CVS repository. + +Specify the name of a CVS checkout using the -w switch or execute it +from the root of the CVS working copy. In the latter case GIT_DIR must +be defined. See examples below. + +It does its best to do the safe thing, it will check that the files are +unchanged and up to date in the CVS checkout, and it will not autocommit +by default. + +Supports file additions, removals, and commits that affect binary files. + +If the commit is a merge commit, you must tell git-cvsexportcommit what parent +should the changeset be done against. + +OPTIONS +------- + +-c:: + Commit automatically if the patch applied cleanly. It will not + commit if any hunks fail to apply or there were other problems. + +-p:: + Be pedantic (paranoid) when applying patches. Invokes patch with + --fuzz=0 + +-a:: + Add authorship information. Adds Author line, and Committer (if + different from Author) to the message. + +-d:: + Set an alternative CVSROOT to use. This corresponds to the CVS + -d parameter. Usually users will not want to set this, except + if using CVS in an asymmetric fashion. + +-f:: + Force the merge even if the files are not up to date. + +-P:: + Force the parent commit, even if it is not a direct parent. + +-m:: + Prepend the commit message with the provided prefix. + Useful for patch series and the like. + +-u:: + Update affected files from CVS repository before attempting export. + +-w:: + Specify the location of the CVS checkout to use for the export. This + option does not require GIT_DIR to be set before execution if the + current directory is within a git repository. + +-v:: + Verbose. + +EXAMPLES +-------- + +Merge one patch into CVS:: ++ +------------ +$ export GIT_DIR=~/project/.git +$ cd ~/project_cvs_checkout +$ git-cvsexportcommit -v <commit-sha1> +$ cvs commit -F .msg <files> +------------ + +Merge one patch into CVS (-c and -w options). The working directory is within the Git Repo:: ++ +------------ + $ git-cvsexportcommit -v -c -w ~/project_cvs_checkout <commit-sha1> +------------ + +Merge pending patches into CVS automatically -- only if you really know what you are doing:: ++ +------------ +$ export GIT_DIR=~/project/.git +$ cd ~/project_cvs_checkout +$ git-cherry cvshead myhead | sed -n 's/^+ //p' | xargs -l1 git-cvsexportcommit -c -p -v +------------ + +Author +------ +Written by Martin Langhoff <martin@catalyst.net.nz> and others. + +Documentation +-------------- +Documentation by Martin Langhoff <martin@catalyst.net.nz> and others. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt new file mode 100644 index 0000000..6f91b9e --- /dev/null +++ b/Documentation/git-cvsimport.txt @@ -0,0 +1,169 @@ +git-cvsimport(1) +================ + +NAME +---- +git-cvsimport - Salvage your data out of another SCM people love to hate + + +SYNOPSIS +-------- +[verse] +'git-cvsimport' [-o <branch-for-HEAD>] [-h] [-v] [-d <CVSROOT>] + [-A <author-conv-file>] [-p <options-for-cvsps>] [-P <file>] + [-C <git_repository>] [-z <fuzz>] [-i] [-k] [-u] [-s <subst>] + [-a] [-m] [-M <regex>] [-S <regex>] [-L <commitlimit>] + [-r <remote>] [<CVS_module>] + + +DESCRIPTION +----------- +Imports a CVS repository into git. It will either create a new +repository, or incrementally import into an existing one. + +Splitting the CVS log into patch sets is done by 'cvsps'. +At least version 2.1 is required. + +You should *never* do any work of your own on the branches that are +created by git-cvsimport. By default initial import will create and populate a +"master" branch from the CVS repository's main branch which you're free +to work with; after that, you need to 'git merge' incremental imports, or +any CVS branches, yourself. It is advisable to specify a named remote via +-r to separate and protect the incoming branches. + + +OPTIONS +------- +-v:: + Verbosity: let 'cvsimport' report what it is doing. + +-d <CVSROOT>:: + The root of the CVS archive. May be local (a simple path) or remote; + currently, only the :local:, :ext: and :pserver: access methods + are supported. If not given, git-cvsimport will try to read it + from `CVS/Root`. If no such file exists, it checks for the + `CVSROOT` environment variable. + +<CVS_module>:: + The CVS module you want to import. Relative to <CVSROOT>. + If not given, git-cvsimport tries to read it from + `CVS/Repository`. + +-C <target-dir>:: + The git repository to import to. If the directory doesn't + exist, it will be created. Default is the current directory. + +-r <remote>:: + The git remote to import this CVS repository into. + Moves all CVS branches into remotes/<remote>/<branch> + akin to the git-clone --use-separate-remote option. + +-o <branch-for-HEAD>:: + When no remote is specified (via -r) the 'HEAD' branch + from CVS is imported to the 'origin' branch within the git + repository, as 'HEAD' already has a special meaning for git. + When a remote is specified the 'HEAD' branch is named + remotes/<remote>/master mirroring git-clone behaviour. + Use this option if you want to import into a different + branch. ++ +Use '-o master' for continuing an import that was initially done by +the old cvs2git tool. + +-i:: + Import-only: don't perform a checkout after importing. This option + ensures the working directory and index remain untouched and will + not create them if they do not exist. + +-k:: + Kill keywords: will extract files with '-kk' from the CVS archive + to avoid noisy changesets. Highly recommended, but off by default + to preserve compatibility with early imported trees. + +-u:: + Convert underscores in tag and branch names to dots. + +-s <subst>:: + Substitute the character "/" in branch names with <subst> + +-p <options-for-cvsps>:: + Additional options for cvsps. + The options '-u' and '-A' are implicit and should not be used here. ++ +If you need to pass multiple options, separate them with a comma. + +-z <fuzz>:: + Pass the timestamp fuzz factor to cvsps, in seconds. If unset, + cvsps defaults to 300s. + +-P <cvsps-output-file>:: + Instead of calling cvsps, read the provided cvsps output file. Useful + for debugging or when cvsps is being handled outside cvsimport. + +-m:: + Attempt to detect merges based on the commit message. This option + will enable default regexes that try to capture the name source + branch name from the commit message. + +-M <regex>:: + Attempt to detect merges based on the commit message with a custom + regex. It can be used with '-m' to enable the default regexes + as well. You must escape forward slashes. + +-S <regex>:: + Skip paths matching the regex. + +-a:: + Import all commits, including recent ones. cvsimport by default + skips commits that have a timestamp less than 10 minutes ago. + +-L <limit>:: + Limit the number of commits imported. Workaround for cases where + cvsimport leaks memory. + +-A <author-conv-file>:: + CVS by default uses the Unix username when writing its + commit logs. Using this option and an author-conv-file + in this format ++ +--------- + exon=Andreas Ericsson <ae@op5.se> + spawn=Simon Pawn <spawn@frog-pond.org> + +--------- ++ +git-cvsimport will make it appear as those authors had +their GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL set properly +all along. ++ +For convenience, this data is saved to `$GIT_DIR/cvs-authors` +each time the '-A' option is provided and read from that same +file each time git-cvsimport is run. ++ +It is not recommended to use this feature if you intend to +export changes back to CVS again later with +linkgit:git-cvsexportcommit[1]. + +-h:: + Print a short usage message and exit. + +OUTPUT +------ +If '-v' is specified, the script reports what it is doing. + +Otherwise, success is indicated the Unix way, i.e. by simply exiting with +a zero exit status. + + +Author +------ +Written by Matthias Urlichs <smurf@smurf.noris.de>, with help from +various participants of the git-list <git@vger.kernel.org>. + +Documentation +-------------- +Documentation by Matthias Urlichs <smurf@smurf.noris.de>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt new file mode 100644 index 0000000..d3e9993 --- /dev/null +++ b/Documentation/git-cvsserver.txt @@ -0,0 +1,322 @@ +git-cvsserver(1) +================ + +NAME +---- +git-cvsserver - A CVS server emulator for git + +SYNOPSIS +-------- + +SSH: + +[verse] +export CVS_SERVER=git-cvsserver +'cvs' -d :ext:user@server/path/repo.git co <HEAD_name> + +pserver (/etc/inetd.conf): + +[verse] +cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver + +Usage: + +[verse] +'git-cvsserver' [options] [pserver|server] [<directory> ...] + +OPTIONS +------- + +All these options obviously only make sense if enforced by the server side. +They have been implemented to resemble the linkgit:git-daemon[1] options as +closely as possible. + +--base-path <path>:: +Prepend 'path' to requested CVSROOT + +--strict-paths:: +Don't allow recursing into subdirectories + +--export-all:: +Don't check for `gitcvs.enabled` in config. You also have to specify a list +of allowed directories (see below) if you want to use this option. + +--version, -V:: +Print version information and exit + +--help, -h, -H:: +Print usage information and exit + +<directory>:: +You can specify a list of allowed directories. If no directories +are given, all are allowed. This is an additional restriction, gitcvs +access still needs to be enabled by the `gitcvs.enabled` config option +unless '--export-all' was given, too. + + +DESCRIPTION +----------- + +This application is a CVS emulation layer for git. + +It is highly functional. However, not all methods are implemented, +and for those methods that are implemented, +not all switches are implemented. + +Testing has been done using both the CLI CVS client, and the Eclipse CVS +plugin. Most functionality works fine with both of these clients. + +LIMITATIONS +----------- + +Currently cvsserver works over SSH connections for read/write clients, and +over pserver for anonymous CVS access. + +CVS clients cannot tag, branch or perform GIT merges. + +git-cvsserver maps GIT branches to CVS modules. This is very different +from what most CVS users would expect since in CVS modules usually represent +one or more directories. + +INSTALLATION +------------ + +1. If you are going to offer anonymous CVS access via pserver, add a line in + /etc/inetd.conf like ++ +-- +------ + cvspserver stream tcp nowait nobody git-cvsserver pserver + +------ +Note: Some inetd servers let you specify the name of the executable +independently of the value of argv[0] (i.e. the name the program assumes +it was executed with). In this case the correct line in /etc/inetd.conf +looks like + +------ + cvspserver stream tcp nowait nobody /usr/bin/git-cvsserver git-cvsserver pserver + +------ +No special setup is needed for SSH access, other than having GIT tools +in the PATH. If you have clients that do not accept the CVS_SERVER +environment variable, you can rename git-cvsserver to cvs. + +Note: Newer CVS versions (>= 1.12.11) also support specifying +CVS_SERVER directly in CVSROOT like + +------ +cvs -d ":ext;CVS_SERVER=git-cvsserver:user@server/path/repo.git" co <HEAD_name> +------ +This has the advantage that it will be saved in your 'CVS/Root' files and +you don't need to worry about always setting the correct environment +variable. +-- +2. For each repo that you want accessible from CVS you need to edit config in + the repo and add the following section. ++ +-- +------ + [gitcvs] + enabled=1 + # optional for debugging + logfile=/path/to/logfile + +------ +Note: you need to ensure each user that is going to invoke git-cvsserver has +write access to the log file and to the database (see +<<dbbackend,Database Backend>>. If you want to offer write access over +SSH, the users of course also need write access to the git repository itself. + +[[configaccessmethod]] +All configuration variables can also be overridden for a specific method of +access. Valid method names are "ext" (for SSH access) and "pserver". The +following example configuration would disable pserver access while still +allowing access over SSH. +------ + [gitcvs] + enabled=0 + + [gitcvs "ext"] + enabled=1 +------ +-- +3. On the client machine you need to set the following variables. + CVSROOT should be set as per normal, but the directory should point at the + appropriate git repo. For example: ++ +-- +For SSH access, CVS_SERVER should be set to git-cvsserver + +Example: + +------ + export CVSROOT=:ext:user@server:/var/git/project.git + export CVS_SERVER=git-cvsserver +------ +-- +4. For SSH clients that will make commits, make sure their .bashrc file + sets the GIT_AUTHOR and GIT_COMMITTER variables. + +5. Clients should now be able to check out the project. Use the CVS 'module' + name to indicate what GIT 'head' you want to check out. Example: ++ +------ + cvs co -d project-master master +------ + +[[dbbackend]] +Database Backend +---------------- + +git-cvsserver uses one database per git head (i.e. CVS module) to +store information about the repository for faster access. The +database doesn't contain any persistent data and can be completely +regenerated from the git repository at any time. The database +needs to be updated (i.e. written to) after every commit. + +If the commit is done directly by using git (as opposed to +using git-cvsserver) the update will need to happen on the +next repository access by git-cvsserver, independent of +access method and requested operation. + +That means that even if you offer only read access (e.g. by using +the pserver method), git-cvsserver should have write access to +the database to work reliably (otherwise you need to make sure +that the database is up-to-date any time git-cvsserver is executed). + +By default it uses SQLite databases in the git directory, named +`gitcvs.<module_name>.sqlite`. Note that the SQLite backend creates +temporary files in the same directory as the database file on +write so it might not be enough to grant the users using +git-cvsserver write access to the database file without granting +them write access to the directory, too. + +You can configure the database backend with the following +configuration variables: + +Configuring database backend +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +git-cvsserver uses the Perl DBI module. Please also read +its documentation if changing these variables, especially +about `DBI->connect()`. + +gitcvs.dbname:: + Database name. The exact meaning depends on the + selected database driver, for SQLite this is a filename. + Supports variable substitution (see below). May + not contain semicolons (`;`). + Default: '%Ggitcvs.%m.sqlite' + +gitcvs.dbdriver:: + Used DBI driver. You can specify any available driver + for this here, but it might not work. cvsserver is tested + with 'DBD::SQLite', reported to work with + 'DBD::Pg', and reported *not* to work with 'DBD::mysql'. + Please regard this as an experimental feature. May not + contain colons (`:`). + Default: 'SQLite' + +gitcvs.dbuser:: + Database user. Only useful if setting `dbdriver`, since + SQLite has no concept of database users. Supports variable + substitution (see below). + +gitcvs.dbpass:: + Database password. Only useful if setting `dbdriver`, since + SQLite has no concept of database passwords. + +All variables can also be set per access method, see <<configaccessmethod,above>>. + +Variable substitution +^^^^^^^^^^^^^^^^^^^^^ +In `dbdriver` and `dbuser` you can use the following variables: + +%G:: + git directory name +%g:: + git directory name, where all characters except for + alpha-numeric ones, `.`, and `-` are replaced with + `_` (this should make it easier to use the directory + name in a filename if wanted) +%m:: + CVS module/git head name +%a:: + access method (one of "ext" or "pserver") +%u:: + Name of the user running git-cvsserver. + If no name can be determined, the + numeric uid is used. + +Eclipse CVS Client Notes +------------------------ + +To get a checkout with the Eclipse CVS client: + +1. Select "Create a new project -> From CVS checkout" +2. Create a new location. See the notes below for details on how to choose the + right protocol. +3. Browse the 'modules' available. It will give you a list of the heads in + the repository. You will not be able to browse the tree from there. Only + the heads. +4. Pick 'HEAD' when it asks what branch/tag to check out. Untick the + "launch commit wizard" to avoid committing the .project file. + +Protocol notes: If you are using anonymous access via pserver, just select that. +Those using SSH access should choose the 'ext' protocol, and configure 'ext' +access on the Preferences->Team->CVS->ExtConnection pane. Set CVS_SERVER to +'git-cvsserver'. Note that password support is not good when using 'ext', +you will definitely want to have SSH keys setup. + +Alternatively, you can just use the non-standard extssh protocol that Eclipse +offer. In that case CVS_SERVER is ignored, and you will have to replace +the cvs utility on the server with git-cvsserver or manipulate your `.bashrc` +so that calling 'cvs' effectively calls git-cvsserver. + +Clients known to work +--------------------- + +- CVS 1.12.9 on Debian +- CVS 1.11.17 on MacOSX (from Fink package) +- Eclipse 3.0, 3.1.2 on MacOSX (see Eclipse CVS Client Notes) +- TortoiseCVS + +Operations supported +-------------------- + +All the operations required for normal use are supported, including +checkout, diff, status, update, log, add, remove, commit. +Legacy monitoring operations are not supported (edit, watch and related). +Exports and tagging (tags and branches) are not supported at this stage. + +The server should set the '-k' mode to binary when relevant, however, +this is not really implemented yet. For now, you can force the server +to set '-kb' for all files by setting the `gitcvs.allbinary` config +variable. In proper GIT tradition, the contents of the files are +always respected. No keyword expansion or newline munging is supported. + +Dependencies +------------ + +git-cvsserver depends on DBD::SQLite. + +Copyright and Authors +--------------------- + +This program is copyright The Open University UK - 2006. + +Authors: + +- Martyn Smith <martyn@catalyst.net.nz> +- Martin Langhoff <martin@catalyst.net.nz> + +with ideas and patches from participants of the git-list <git@vger.kernel.org>. + +Documentation +-------------- +Documentation by Martyn Smith <martyn@catalyst.net.nz>, Martin Langhoff <martin@catalyst.net.nz>, and Matthias Urlichs <smurf@smurf.noris.de>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt new file mode 100644 index 0000000..fd83bc7 --- /dev/null +++ b/Documentation/git-daemon.txt @@ -0,0 +1,275 @@ +git-daemon(1) +============= + +NAME +---- +git-daemon - A really simple server for git repositories + +SYNOPSIS +-------- +[verse] +'git-daemon' [--verbose] [--syslog] [--export-all] + [--timeout=n] [--init-timeout=n] [--strict-paths] + [--base-path=path] [--user-path | --user-path=path] + [--interpolated-path=pathtemplate] + [--reuseaddr] [--detach] [--pid-file=file] + [--enable=service] [--disable=service] + [--allow-override=service] [--forbid-override=service] + [--inetd | [--listen=host_or_ipaddr] [--port=n] [--user=user [--group=group]] + [directory...] + +DESCRIPTION +----------- +A really simple TCP git daemon that normally listens on port "DEFAULT_GIT_PORT" +aka 9418. It waits for a connection asking for a service, and will serve +that service if it is enabled. + +It verifies that the directory has the magic file "git-daemon-export-ok", and +it will refuse to export any git directory that hasn't explicitly been marked +for export this way (unless the '--export-all' parameter is specified). If you +pass some directory paths as 'git-daemon' arguments, you can further restrict +the offers to a whitelist comprising of those. + +By default, only `upload-pack` service is enabled, which serves +`git-fetch-pack` and `git-ls-remote` clients, which are invoked +from `git-fetch`, `git-pull`, and `git-clone`. + +This is ideally suited for read-only updates, i.e., pulling from +git repositories. + +An `upload-archive` also exists to serve `git-archive`. + +OPTIONS +------- +--strict-paths:: + Match paths exactly (i.e. don't allow "/foo/repo" when the real path is + "/foo/repo.git" or "/foo/repo/.git") and don't do user-relative paths. + git-daemon will refuse to start when this option is enabled and no + whitelist is specified. + +--base-path:: + Remap all the path requests as relative to the given path. + This is sort of "GIT root" - if you run git-daemon with + '--base-path=/srv/git' on example.com, then if you later try to pull + 'git://example.com/hello.git', `git-daemon` will interpret the path + as '/srv/git/hello.git'. + +--base-path-relaxed:: + If --base-path is enabled and repo lookup fails, with this option + `git-daemon` will attempt to lookup without prefixing the base path. + This is useful for switching to --base-path usage, while still + allowing the old paths. + +--interpolated-path=pathtemplate:: + To support virtual hosting, an interpolated path template can be + used to dynamically construct alternate paths. The template + supports %H for the target hostname as supplied by the client but + converted to all lowercase, %CH for the canonical hostname, + %IP for the server's IP address, %P for the port number, + and %D for the absolute path of the named repository. + After interpolation, the path is validated against the directory + whitelist. + +--export-all:: + Allow pulling from all directories that look like GIT repositories + (have the 'objects' and 'refs' subdirectories), even if they + do not have the 'git-daemon-export-ok' file. + +--inetd:: + Have the server run as an inetd service. Implies --syslog. + Incompatible with --port, --listen, --user and --group options. + +--listen=host_or_ipaddr:: + Listen on an a specific IP address or hostname. IP addresses can + be either an IPv4 address or an IPV6 address if supported. If IPv6 + is not supported, then --listen=hostname is also not supported and + --listen must be given an IPv4 address. + Incompatible with '--inetd' option. + +--port=n:: + Listen on an alternative port. Incompatible with '--inetd' option. + +--init-timeout:: + Timeout between the moment the connection is established and the + client request is received (typically a rather low value, since + that should be basically immediate). + +--timeout:: + Timeout for specific client sub-requests. This includes the time + it takes for the server to process the sub-request and time spent + waiting for next client's request. + +--syslog:: + Log to syslog instead of stderr. Note that this option does not imply + --verbose, thus by default only error conditions will be logged. + +--user-path, --user-path=path:: + Allow ~user notation to be used in requests. When + specified with no parameter, requests to + git://host/~alice/foo is taken as a request to access + 'foo' repository in the home directory of user `alice`. + If `--user-path=path` is specified, the same request is + taken as a request to access `path/foo` repository in + the home directory of user `alice`. + +--verbose:: + Log details about the incoming connections and requested files. + +--reuseaddr:: + Use SO_REUSEADDR when binding the listening socket. + This allows the server to restart without waiting for + old connections to time out. + +--detach:: + Detach from the shell. Implies --syslog. + +--pid-file=file:: + Save the process id in 'file'. Ignored when the daemon + is run under `--inetd`. + +--user=user, --group=group:: + Change daemon's uid and gid before entering the service loop. + When only `--user` is given without `--group`, the + primary group ID for the user is used. The values of + the option are given to `getpwnam(3)` and `getgrnam(3)` + and numeric IDs are not supported. ++ +Giving these options is an error when used with `--inetd`; use +the facility of inet daemon to achieve the same before spawning +`git-daemon` if needed. + +--enable=service, --disable=service:: + Enable/disable the service site-wide per default. Note + that a service disabled site-wide can still be enabled + per repository if it is marked overridable and the + repository enables the service with an configuration + item. + +--allow-override=service, --forbid-override=service:: + Allow/forbid overriding the site-wide default with per + repository configuration. By default, all the services + are overridable. + +<directory>:: + A directory to add to the whitelist of allowed directories. Unless + --strict-paths is specified this will also include subdirectories + of each named directory. + +SERVICES +-------- + +These services can be globally enabled/disabled using the +command line options of this command. If a finer-grained +control is desired (e.g. to allow `git-archive` to be run +against only in a few selected repositories the daemon serves), +the per-repository configuration file can be used to enable or +disable them. + +upload-pack:: + This serves `git-fetch-pack` and `git-ls-remote` + clients. It is enabled by default, but a repository can + disable it by setting `daemon.uploadpack` configuration + item to `false`. + +upload-archive:: + This serves `git-archive --remote`. It is disabled by + default, but a repository can enable it by setting + `daemon.uploadarchive` configuration item to `true`. + +receive-pack:: + This serves `git-send-pack` clients, allowing anonymous + push. It is disabled by default, as there is _no_ + authentication in the protocol (in other words, anybody + can push anything into the repository, including removal + of refs). This is solely meant for a closed LAN setting + where everybody is friendly. This service can be + enabled by `daemon.receivepack` configuration item to + `true`. + +EXAMPLES +-------- +We assume the following in /etc/services:: ++ +------------ +$ grep 9418 /etc/services +git 9418/tcp # Git Version Control System +------------ + +git-daemon as inetd server:: + To set up `git-daemon` as an inetd service that handles any + repository under the whitelisted set of directories, /pub/foo + and /pub/bar, place an entry like the following into + /etc/inetd all on one line: ++ +------------------------------------------------ + git stream tcp nowait nobody /usr/bin/git-daemon + git-daemon --inetd --verbose --export-all + /pub/foo /pub/bar +------------------------------------------------ + + +git-daemon as inetd server for virtual hosts:: + To set up `git-daemon` as an inetd service that handles + repositories for different virtual hosts, `www.example.com` + and `www.example.org`, place an entry like the following into + `/etc/inetd` all on one line: ++ +------------------------------------------------ + git stream tcp nowait nobody /usr/bin/git-daemon + git-daemon --inetd --verbose --export-all + --interpolated-path=/pub/%H%D + /pub/www.example.org/software + /pub/www.example.com/software + /software +------------------------------------------------ ++ +In this example, the root-level directory `/pub` will contain +a subdirectory for each virtual host name supported. +Further, both hosts advertise repositories simply as +`git://www.example.com/software/repo.git`. For pre-1.4.0 +clients, a symlink from `/software` into the appropriate +default repository could be made as well. + + +git-daemon as regular daemon for virtual hosts:: + To set up `git-daemon` as a regular, non-inetd service that + handles repositories for multiple virtual hosts based on + their IP addresses, start the daemon like this: ++ +------------------------------------------------ + git-daemon --verbose --export-all + --interpolated-path=/pub/%IP/%D + /pub/192.168.1.200/software + /pub/10.10.220.23/software +------------------------------------------------ ++ +In this example, the root-level directory `/pub` will contain +a subdirectory for each virtual host IP address supported. +Repositories can still be accessed by hostname though, assuming +they correspond to these IP addresses. + +selectively enable/disable services per repository:: + To enable `git-archive --remote` and disable `git-fetch` against + a repository, have the following in the configuration file in the + repository (that is the file 'config' next to 'HEAD', 'refs' and + 'objects'). ++ +---------------------------------------------------------------- + [daemon] + uploadpack = false + uploadarchive = true +---------------------------------------------------------------- + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org>, YOSHIFUJI Hideaki +<yoshfuji@linux-ipv6.org> and the git-list <git@vger.kernel.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt new file mode 100644 index 0000000..0742152 --- /dev/null +++ b/Documentation/git-describe.txt @@ -0,0 +1,126 @@ +git-describe(1) +=============== + +NAME +---- +git-describe - Show the most recent tag that is reachable from a commit + + +SYNOPSIS +-------- +'git-describe' [--all] [--tags] [--contains] [--abbrev=<n>] <committish>... + +DESCRIPTION +----------- +The command finds the most recent tag that is reachable from a +commit, and if the commit itself is pointed at by the tag, shows +the tag. Otherwise, it suffixes the tag name with the number of +additional commits and the abbreviated object name of the commit. + + +OPTIONS +------- +<committish>:: + The object name of the committish. + +--all:: + Instead of using only the annotated tags, use any ref + found in `.git/refs/`. + +--tags:: + Instead of using only the annotated tags, use any tag + found in `.git/refs/tags`. + +--contains:: + Instead of finding the tag that predates the commit, find + the tag that comes after the commit, and thus contains it. + Automatically implies --tags. + +--abbrev=<n>:: + Instead of using the default 8 hexadecimal digits as the + abbreviated object name, use <n> digits. + +--candidates=<n>:: + Instead of considering only the 10 most recent tags as + candidates to describe the input committish consider + up to <n> candidates. Increasing <n> above 10 will take + slightly longer but may produce a more accurate result. + +--debug:: + Verbosely display information about the searching strategy + being employed to standard error. The tag name will still + be printed to standard out. + +EXAMPLES +-------- + +With something like git.git current tree, I get: + + [torvalds@g5 git]$ git-describe parent + v1.0.4-14-g2414721 + +i.e. the current head of my "parent" branch is based on v1.0.4, +but since it has a handful commits on top of that, +describe has added the number of additional commits ("14") and +an abbreviated object name for the commit itself ("2414721") +at the end. + +The number of additional commits is the number +of commits which would be displayed by "git log v1.0.4..parent". +The hash suffix is "-g" + 7-char abbreviation for the tip commit +of parent (which was `2414721b194453f058079d897d13c4e377f92dc6`). + +Doing a "git-describe" on a tag-name will just show the tag name: + + [torvalds@g5 git]$ git-describe v1.0.4 + v1.0.4 + +With --all, the command can use branch heads as references, so +the output shows the reference path as well: + + [torvalds@g5 git]$ git describe --all --abbrev=4 v1.0.5^2 + tags/v1.0.0-21-g975b + + [torvalds@g5 git]$ git describe --all HEAD^ + heads/lt/describe-7-g975b + +With --abbrev set to 0, the command can be used to find the +closest tagname without any suffix: + + [torvalds@g5 git]$ git describe --abbrev=0 v1.0.5^2 + tags/v1.0.0 + +SEARCH STRATEGY +--------------- + +For each committish supplied "git describe" will first look for +a tag which tags exactly that commit. Annotated tags will always +be preferred over lightweight tags, and tags with newer dates will +always be preferred over tags with older dates. If an exact match +is found, its name will be output and searching will stop. + +If an exact match was not found "git describe" will walk back +through the commit history to locate an ancestor commit which +has been tagged. The ancestor's tag will be output along with an +abbreviation of the input committish's SHA1. + +If multiple tags were found during the walk then the tag which +has the fewest commits different from the input committish will be +selected and output. Here fewest commits different is defined as +the number of commits which would be shown by "git log tag..input" +will be the smallest number of commits possible. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org>, but somewhat +butchered by Junio C Hamano <junkio@cox.net>. Later significantly +updated by Shawn Pearce <spearce@spearce.org>. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-diff-files.txt b/Documentation/git-diff-files.txt new file mode 100644 index 0000000..6d2ea16 --- /dev/null +++ b/Documentation/git-diff-files.txt @@ -0,0 +1,60 @@ +git-diff-files(1) +================= + +NAME +---- +git-diff-files - Compares files in the working tree and the index + + +SYNOPSIS +-------- +'git-diff-files' [-q] [-0|-1|-2|-3|-c|--cc|--no-index] [<common diff options>] [<path>...] + +DESCRIPTION +----------- +Compares the files in the working tree and the index. When paths +are specified, compares only those named paths. Otherwise all +entries in the index are compared. The output format is the +same as "git-diff-index" and "git-diff-tree". + +OPTIONS +------- +include::diff-options.txt[] + +-1 -2 -3 or --base --ours --theirs, and -0:: + Diff against the "base" version, "our branch" or "their + branch" respectively. With these options, diffs for + merged entries are not shown. ++ +The default is to diff against our branch (-2) and the +cleanly resolved paths. The option -0 can be given to +omit diff output for unmerged entries and just show "Unmerged". + +-c,--cc:: + This compares stage 2 (our branch), stage 3 (their + branch) and the working tree file and outputs a combined + diff, similar to the way 'diff-tree' shows a merge + commit with these flags. + +--no-index:: + Compare the two given files / directories. + +-q:: + Remain silent even on nonexistent files + +Output format +------------- +include::diff-format.txt[] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt new file mode 100644 index 0000000..e867778 --- /dev/null +++ b/Documentation/git-diff-index.txt @@ -0,0 +1,132 @@ +git-diff-index(1) +================= + +NAME +---- +git-diff-index - Compares content and mode of blobs between the index and repository + + +SYNOPSIS +-------- +'git-diff-index' [-m] [--cached] [<common diff options>] <tree-ish> [<path>...] + +DESCRIPTION +----------- +Compares the content and mode of the blobs found via a tree +object with the content of the current index and, optionally +ignoring the stat state of the file on disk. When paths are +specified, compares only those named paths. Otherwise all +entries in the index are compared. + +OPTIONS +------- +include::diff-options.txt[] + +<tree-ish>:: + The id of a tree object to diff against. + +--cached:: + do not consider the on-disk file at all + +-m:: + By default, files recorded in the index but not checked + out are reported as deleted. This flag makes + "git-diff-index" say that all non-checked-out files are up + to date. + +Output format +------------- +include::diff-format.txt[] + +Operating Modes +--------------- +You can choose whether you want to trust the index file entirely +(using the '--cached' flag) or ask the diff logic to show any files +that don't match the stat state as being "tentatively changed". Both +of these operations are very useful indeed. + +Cached Mode +----------- +If '--cached' is specified, it allows you to ask: + + show me the differences between HEAD and the current index + contents (the ones I'd write with a "git-write-tree") + +For example, let's say that you have worked on your working directory, updated +some files in the index and are ready to commit. You want to see exactly +*what* you are going to commit, without having to write a new tree +object and compare it that way, and to do that, you just do + + git-diff-index --cached HEAD + +Example: let's say I had renamed `commit.c` to `git-commit.c`, and I had +done an "git-update-index" to make that effective in the index file. +"git-diff-files" wouldn't show anything at all, since the index file +matches my working directory. But doing a "git-diff-index" does: + + torvalds@ppc970:~/git> git-diff-index --cached HEAD + -100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 commit.c + +100644 blob 4161aecc6700a2eb579e842af0b7f22b98443f74 git-commit.c + +You can see easily that the above is a rename. + +In fact, "git-diff-index --cached" *should* always be entirely equivalent to +actually doing a "git-write-tree" and comparing that. Except this one is much +nicer for the case where you just want to check where you are. + +So doing a "git-diff-index --cached" is basically very useful when you are +asking yourself "what have I already marked for being committed, and +what's the difference to a previous tree". + +Non-cached Mode +--------------- +The "non-cached" mode takes a different approach, and is potentially +the more useful of the two in that what it does can't be emulated with +a "git-write-tree" + "git-diff-tree". Thus that's the default mode. +The non-cached version asks the question: + + show me the differences between HEAD and the currently checked out + tree - index contents _and_ files that aren't up-to-date + +which is obviously a very useful question too, since that tells you what +you *could* commit. Again, the output matches the "git-diff-tree -r" +output to a tee, but with a twist. + +The twist is that if some file doesn't match the index, we don't have +a backing store thing for it, and we use the magic "all-zero" sha1 to +show that. So let's say that you have edited `kernel/sched.c`, but +have not actually done a "git-update-index" on it yet - there is no +"object" associated with the new state, and you get: + + torvalds@ppc970:~/v2.6/linux> git-diff-index HEAD + *100644->100664 blob 7476bb......->000000...... kernel/sched.c + +i.e., it shows that the tree has changed, and that `kernel/sched.c` has is +not up-to-date and may contain new stuff. The all-zero sha1 means that to +get the real diff, you need to look at the object in the working directory +directly rather than do an object-to-object diff. + +NOTE: As with other commands of this type, "git-diff-index" does not +actually look at the contents of the file at all. So maybe +`kernel/sched.c` hasn't actually changed, and it's just that you +touched it. In either case, it's a note that you need to +"git-update-index" it to make the index be in sync. + +NOTE: You can have a mixture of files show up as "has been updated" +and "is still dirty in the working directory" together. You can always +tell which file is in which state, since the "has been updated" ones +show a valid sha1, and the "not in sync with the index" ones will +always have the special all-zero sha1. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt new file mode 100644 index 0000000..58d02c6 --- /dev/null +++ b/Documentation/git-diff-tree.txt @@ -0,0 +1,168 @@ +git-diff-tree(1) +================ + +NAME +---- +git-diff-tree - Compares the content and mode of blobs found via two tree objects + + +SYNOPSIS +-------- +[verse] +'git-diff-tree' [--stdin] [-m] [-s] [-v] [--no-commit-id] [--pretty] + [-t] [-r] [-c | --cc] [--root] [<common diff options>] + <tree-ish> [<tree-ish>] [<path>...] + +DESCRIPTION +----------- +Compares the content and mode of the blobs found via two tree objects. + +If there is only one <tree-ish> given, the commit is compared with its parents +(see --stdin below). + +Note that "git-diff-tree" can use the tree encapsulated in a commit object. + +OPTIONS +------- +include::diff-options.txt[] + +<tree-ish>:: + The id of a tree object. + +<path>...:: + If provided, the results are limited to a subset of files + matching one of these prefix strings. + i.e., file matches `/^<pattern1>|<pattern2>|.../` + Note that this parameter does not provide any wildcard or regexp + features. + +-r:: + recurse into sub-trees + +-t:: + show tree entry itself as well as subtrees. Implies -r. + +--root:: + When '--root' is specified the initial commit will be showed as a big + creation event. This is equivalent to a diff against the NULL tree. + +--stdin:: + When '--stdin' is specified, the command does not take + <tree-ish> arguments from the command line. Instead, it + reads either one <commit> or a pair of <tree-ish> + separated with a single space from its standard input. ++ +When a single commit is given on one line of such input, it compares +the commit with its parents. The following flags further affects its +behavior. This does not apply to the case where two <tree-ish> +separated with a single space are given. + +-m:: + By default, "git-diff-tree --stdin" does not show + differences for merge commits. With this flag, it shows + differences to that commit from all of its parents. See + also '-c'. + +-s:: + By default, "git-diff-tree --stdin" shows differences, + either in machine-readable form (without '-p') or in patch + form (with '-p'). This output can be suppressed. It is + only useful with '-v' flag. + +-v:: + This flag causes "git-diff-tree --stdin" to also show + the commit message before the differences. + +include::pretty-options.txt[] + +--no-commit-id:: + git-diff-tree outputs a line with the commit ID when + applicable. This flag suppressed the commit ID output. + +-c:: + This flag changes the way a merge commit is displayed + (which means it is useful only when the command is given + one <tree-ish>, or '--stdin'). It shows the differences + from each of the parents to the merge result simultaneously + instead of showing pairwise diff between a parent and the + result one at a time (which is what the '-m' option does). + Furthermore, it lists only files which were modified + from all parents. + +--cc:: + This flag changes the way a merge commit patch is displayed, + in a similar way to the '-c' option. It implies the '-c' + and '-p' options and further compresses the patch output + by omitting hunks that show differences from only one + parent, or show the same change from all but one parent + for an Octopus merge. When this optimization makes all + hunks disappear, the commit itself and the commit log + message is not shown, just like in any other "empty diff" case. + +--always:: + Show the commit itself and the commit log message even + if the diff itself is empty. + + +include::pretty-formats.txt[] + + +Limiting Output +--------------- +If you're only interested in differences in a subset of files, for +example some architecture-specific files, you might do: + + git-diff-tree -r <tree-ish> <tree-ish> arch/ia64 include/asm-ia64 + +and it will only show you what changed in those two directories. + +Or if you are searching for what changed in just `kernel/sched.c`, just do + + git-diff-tree -r <tree-ish> <tree-ish> kernel/sched.c + +and it will ignore all differences to other files. + +The pattern is always the prefix, and is matched exactly. There are no +wildcards. Even stricter, it has to match a complete path component. +I.e. "foo" does not pick up `foobar.h`. "foo" does match `foo/bar.h` +so it can be used to name subdirectories. + +An example of normal usage is: + + torvalds@ppc970:~/git> git-diff-tree 5319e4...... + *100664->100664 blob ac348b.......->a01513....... git-fsck-objects.c + +which tells you that the last commit changed just one file (it's from +this one: + +----------------------------------------------------------------------------- +commit 3c6f7ca19ad4043e9e72fa94106f352897e651a8 +tree 5319e4d609cdd282069cc4dce33c1db559539b03 +parent b4e628ea30d5ab3606119d2ea5caeab141d38df7 +author Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005 +committer Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005 + +Make "git-fsck-objects" print out all the root commits it finds. + +Once I do the reference tracking, I'll also make it print out all the +HEAD commits it finds, which is even more interesting. +----------------------------------------------------------------------------- + +in case you care). + +Output format +------------- +include::diff-format.txt[] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt new file mode 100644 index 0000000..57c2862 --- /dev/null +++ b/Documentation/git-diff.txt @@ -0,0 +1,171 @@ +git-diff(1) +=========== + +NAME +---- +git-diff - Show changes between commits, commit and working tree, etc + + +SYNOPSIS +-------- +'git-diff' [<common diff options>] <commit>{0,2} [--] [<path>...] + +DESCRIPTION +----------- +Show changes between two trees, a tree and the working tree, a +tree and the index file, or the index file and the working tree. + +'git-diff' [--options] [--] [<path>...]:: + + This form is to view the changes you made relative to + the index (staging area for the next commit). In other + words, the differences are what you _could_ tell git to + further add to the index but you still haven't. You can + stage these changes by using linkgit:git-add[1]. ++ +If exactly two paths are given, and at least one is untracked, +compare the two files / directories. This behavior can be +forced by --no-index. + +'git-diff' [--options] --cached [<commit>] [--] [<path>...]:: + + This form is to view the changes you staged for the next + commit relative to the named <commit>. Typically you + would want comparison with the latest commit, so if you + do not give <commit>, it defaults to HEAD. + +'git-diff' [--options] <commit> [--] [<path>...]:: + + This form is to view the changes you have in your + working tree relative to the named <commit>. You can + use HEAD to compare it with the latest commit, or a + branch name to compare with the tip of a different + branch. + +'git-diff' [--options] <commit> <commit> [--] [<path>...]:: + + This is to view the changes between two arbitrary + <commit>. + +'git-diff' [--options] <commit>..<commit> [--] [<path>...]:: + + This is synonymous to the previous form. If <commit> on + one side is omitted, it will have the same effect as + using HEAD instead. + +'git-diff' [--options] <commit>\...<commit> [--] [<path>...]:: + + This form is to view the changes on the branch containing + and up to the second <commit>, starting at a common ancestor + of both <commit>. "git-diff A\...B" is equivalent to + "git-diff $(git-merge-base A B) B". You can omit any one + of <commit>, which has the same effect as using HEAD instead. + +Just in case if you are doing something exotic, it should be +noted that all of the <commit> in the above description, except +for the last two forms that use ".." notations, can be any +<tree-ish>. + +For a more complete list of ways to spell <commit>, see +"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. +However, "diff" is about comparing two _endpoints_, not ranges, +and the range notations ("<commit>..<commit>" and +"<commit>\...<commit>") do not mean a range as defined in the +"SPECIFYING RANGES" section in linkgit:git-rev-parse[1]. + +OPTIONS +------- +:git-diff: 1 +include::diff-options.txt[] + +<path>...:: + The <paths> parameters, when given, are used to limit + the diff to the named paths (you can give directory + names and get diff for all files under them). + +Output format +------------- +include::diff-format.txt[] + +EXAMPLES +-------- + +Various ways to check your working tree:: ++ +------------ +$ git diff <1> +$ git diff --cached <2> +$ git diff HEAD <3> +------------ ++ +<1> Changes in the working tree not yet staged for the next commit. +<2> Changes between the index and your last commit; what you +would be committing if you run "git commit" without "-a" option. +<3> Changes in the working tree since your last commit; what you +would be committing if you run "git commit -a" + +Comparing with arbitrary commits:: ++ +------------ +$ git diff test <1> +$ git diff HEAD -- ./test <2> +$ git diff HEAD^ HEAD <3> +------------ ++ +<1> Instead of using the tip of the current branch, compare with the +tip of "test" branch. +<2> Instead of comparing with the tip of "test" branch, compare with +the tip of the current branch, but limit the comparison to the +file "test". +<3> Compare the version before the last commit and the last commit. + +Comparing branches:: ++ +------------ +$ git diff topic master <1> +$ git diff topic..master <2> +$ git diff topic...master <3> +------------ ++ +<1> Changes between the tips of the topic and the master branches. +<2> Same as above. +<3> Changes that occurred on the master branch since when the topic +branch was started off it. + +Limiting the diff output:: ++ +------------ +$ git diff --diff-filter=MRC <1> +$ git diff --name-status <2> +$ git diff arch/i386 include/asm-i386 <3> +------------ ++ +<1> Show only modification, rename and copy, but not addition +nor deletion. +<2> Show only names and the nature of change, but not actual +diff output. +<3> Limit diff output to named subtrees. + +Munging the diff output:: ++ +------------ +$ git diff --find-copies-harder -B -C <1> +$ git diff -R <2> +------------ ++ +<1> Spend extra cycles to find renames, copies and complete +rewrites (very expensive). +<2> Output diff in reverse. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fast-export.txt b/Documentation/git-fast-export.txt new file mode 100644 index 0000000..6dac475 --- /dev/null +++ b/Documentation/git-fast-export.txt @@ -0,0 +1,83 @@ +git-fast-export(1) +================== + +NAME +---- +git-fast-export - Git data exporter + + +SYNOPSIS +-------- +'git-fast-export [options]' | 'git-fast-import' + +DESCRIPTION +----------- +This program dumps the given revisions in a form suitable to be piped +into linkgit:git-fast-import[1]. + +You can use it as a human readable bundle replacement (see +linkgit:git-bundle[1]), or as a kind of an interactive +linkgit:git-filter-branch[1]. + + +OPTIONS +------- +--progress=<n>:: + Insert 'progress' statements every <n> objects, to be shown by + linkgit:git-fast-import[1] during import. + +--signed-tags=(verbatim|warn|strip|abort):: + Specify how to handle signed tags. Since any transformation + after the export can change the tag names (which can also happen + when excluding revisions) the signatures will not match. ++ +When asking to 'abort' (which is the default), this program will die +when encountering a signed tag. With 'strip', the tags will be made +unsigned, with 'verbatim', they will be silently exported +and with 'warn', they will be exported, but you will see a warning. + + +EXAMPLES +-------- + +------------------------------------------------------------------- +$ git fast-export --all | (cd /empty/repository && git fast-import) +------------------------------------------------------------------- + +This will export the whole repository and import it into the existing +empty repository. Except for reencoding commits that are not in +UTF-8, it would be a one-to-one mirror. + +----------------------------------------------------- +$ git fast-export master~5..master | + sed "s|refs/heads/master|refs/heads/other|" | + git fast-import +----------------------------------------------------- + +This makes a new branch called 'other' from 'master~5..master' +(i.e. if 'master' has linear history, it will take the last 5 commits). + +Note that this assumes that none of the blobs and commit messages +referenced by that revision range contains the string +'refs/heads/master'. + + +Limitations +----------- + +Since linkgit:git-fast-import[1] cannot tag trees, you will not be +able to export the linux-2.6.git repository completely, as it contains +a tag referencing a tree instead of a commit. + + +Author +------ +Written by Johannes E. Schindelin <johannes.schindelin@gmx.de>. + +Documentation +-------------- +Documentation by Johannes E. Schindelin <johannes.schindelin@gmx.de>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt new file mode 100644 index 0000000..bd625ab --- /dev/null +++ b/Documentation/git-fast-import.txt @@ -0,0 +1,1030 @@ +git-fast-import(1) +================== + +NAME +---- +git-fast-import - Backend for fast Git data importers + + +SYNOPSIS +-------- +frontend | 'git-fast-import' [options] + +DESCRIPTION +----------- +This program is usually not what the end user wants to run directly. +Most end users want to use one of the existing frontend programs, +which parses a specific type of foreign source and feeds the contents +stored there to git-fast-import. + +fast-import reads a mixed command/data stream from standard input and +writes one or more packfiles directly into the current repository. +When EOF is received on standard input, fast import writes out +updated branch and tag refs, fully updating the current repository +with the newly imported data. + +The fast-import backend itself can import into an empty repository (one that +has already been initialized by linkgit:git-init[1]) or incrementally +update an existing populated repository. Whether or not incremental +imports are supported from a particular foreign source depends on +the frontend program in use. + + +OPTIONS +------- +--date-format=<fmt>:: + Specify the type of dates the frontend will supply to + fast-import within `author`, `committer` and `tagger` commands. + See ``Date Formats'' below for details about which formats + are supported, and their syntax. + +--force:: + Force updating modified existing branches, even if doing + so would cause commits to be lost (as the new commit does + not contain the old commit). + +--max-pack-size=<n>:: + Maximum size of each output packfile, expressed in MiB. + The default is 4096 (4 GiB) as that is the maximum allowed + packfile size (due to file format limitations). Some + importers may wish to lower this, such as to ensure the + resulting packfiles fit on CDs. + +--depth=<n>:: + Maximum delta depth, for blob and tree deltification. + Default is 10. + +--active-branches=<n>:: + Maximum number of branches to maintain active at once. + See ``Memory Utilization'' below for details. Default is 5. + +--export-marks=<file>:: + Dumps the internal marks table to <file> when complete. + Marks are written one per line as `:markid SHA-1`. + Frontends can use this file to validate imports after they + have been completed, or to save the marks table across + incremental runs. As <file> is only opened and truncated + at checkpoint (or completion) the same path can also be + safely given to \--import-marks. + +--import-marks=<file>:: + Before processing any input, load the marks specified in + <file>. The input file must exist, must be readable, and + must use the same format as produced by \--export-marks. + Multiple options may be supplied to import more than one + set of marks. If a mark is defined to different values, + the last file wins. + +--export-pack-edges=<file>:: + After creating a packfile, print a line of data to + <file> listing the filename of the packfile and the last + commit on each branch that was written to that packfile. + This information may be useful after importing projects + whose total object set exceeds the 4 GiB packfile limit, + as these commits can be used as edge points during calls + to linkgit:git-pack-objects[1]. + +--quiet:: + Disable all non-fatal output, making fast-import silent when it + is successful. This option disables the output shown by + \--stats. + +--stats:: + Display some basic statistics about the objects fast-import has + created, the packfiles they were stored into, and the + memory used by fast-import during this run. Showing this output + is currently the default, but can be disabled with \--quiet. + + +Performance +----------- +The design of fast-import allows it to import large projects in a minimum +amount of memory usage and processing time. Assuming the frontend +is able to keep up with fast-import and feed it a constant stream of data, +import times for projects holding 10+ years of history and containing +100,000+ individual commits are generally completed in just 1-2 +hours on quite modest (~$2,000 USD) hardware. + +Most bottlenecks appear to be in foreign source data access (the +source just cannot extract revisions fast enough) or disk IO (fast-import +writes as fast as the disk will take the data). Imports will run +faster if the source data is stored on a different drive than the +destination Git repository (due to less IO contention). + + +Development Cost +---------------- +A typical frontend for fast-import tends to weigh in at approximately 200 +lines of Perl/Python/Ruby code. Most developers have been able to +create working importers in just a couple of hours, even though it +is their first exposure to fast-import, and sometimes even to Git. This is +an ideal situation, given that most conversion tools are throw-away +(use once, and never look back). + + +Parallel Operation +------------------ +Like `git-push` or `git-fetch`, imports handled by fast-import are safe to +run alongside parallel `git repack -a -d` or `git gc` invocations, +or any other Git operation (including `git prune`, as loose objects +are never used by fast-import). + +fast-import does not lock the branch or tag refs it is actively importing. +After the import, during its ref update phase, fast-import tests each +existing branch ref to verify the update will be a fast-forward +update (the commit stored in the ref is contained in the new +history of the commit to be written). If the update is not a +fast-forward update, fast-import will skip updating that ref and instead +prints a warning message. fast-import will always attempt to update all +branch refs, and does not stop on the first failure. + +Branch updates can be forced with \--force, but its recommended that +this only be used on an otherwise quiet repository. Using \--force +is not necessary for an initial import into an empty repository. + + +Technical Discussion +-------------------- +fast-import tracks a set of branches in memory. Any branch can be created +or modified at any point during the import process by sending a +`commit` command on the input stream. This design allows a frontend +program to process an unlimited number of branches simultaneously, +generating commits in the order they are available from the source +data. It also simplifies the frontend programs considerably. + +fast-import does not use or alter the current working directory, or any +file within it. (It does however update the current Git repository, +as referenced by `GIT_DIR`.) Therefore an import frontend may use +the working directory for its own purposes, such as extracting file +revisions from the foreign source. This ignorance of the working +directory also allows fast-import to run very quickly, as it does not +need to perform any costly file update operations when switching +between branches. + +Input Format +------------ +With the exception of raw file data (which Git does not interpret) +the fast-import input format is text (ASCII) based. This text based +format simplifies development and debugging of frontend programs, +especially when a higher level language such as Perl, Python or +Ruby is being used. + +fast-import is very strict about its input. Where we say SP below we mean +*exactly* one space. Likewise LF means one (and only one) linefeed. +Supplying additional whitespace characters will cause unexpected +results, such as branch names or file names with leading or trailing +spaces in their name, or early termination of fast-import when it encounters +unexpected input. + +Stream Comments +~~~~~~~~~~~~~~~ +To aid in debugging frontends fast-import ignores any line that +begins with `#` (ASCII pound/hash) up to and including the line +ending `LF`. A comment line may contain any sequence of bytes +that does not contain an LF and therefore may be used to include +any detailed debugging information that might be specific to the +frontend and useful when inspecting a fast-import data stream. + +Date Formats +~~~~~~~~~~~~ +The following date formats are supported. A frontend should select +the format it will use for this import by passing the format name +in the \--date-format=<fmt> command line option. + +`raw`:: + This is the Git native format and is `<time> SP <offutc>`. + It is also fast-import's default format, if \--date-format was + not specified. ++ +The time of the event is specified by `<time>` as the number of +seconds since the UNIX epoch (midnight, Jan 1, 1970, UTC) and is +written as an ASCII decimal integer. ++ +The local offset is specified by `<offutc>` as a positive or negative +offset from UTC. For example EST (which is 5 hours behind UTC) +would be expressed in `<tz>` by ``-0500'' while UTC is ``+0000''. +The local offset does not affect `<time>`; it is used only as an +advisement to help formatting routines display the timestamp. ++ +If the local offset is not available in the source material, use +``+0000'', or the most common local offset. For example many +organizations have a CVS repository which has only ever been accessed +by users who are located in the same location and timezone. In this +case a reasonable offset from UTC could be assumed. ++ +Unlike the `rfc2822` format, this format is very strict. Any +variation in formatting will cause fast-import to reject the value. + +`rfc2822`:: + This is the standard email format as described by RFC 2822. ++ +An example value is ``Tue Feb 6 11:22:18 2007 -0500''. The Git +parser is accurate, but a little on the lenient side. It is the +same parser used by linkgit:git-am[1] when applying patches +received from email. ++ +Some malformed strings may be accepted as valid dates. In some of +these cases Git will still be able to obtain the correct date from +the malformed string. There are also some types of malformed +strings which Git will parse wrong, and yet consider valid. +Seriously malformed strings will be rejected. ++ +Unlike the `raw` format above, the timezone/UTC offset information +contained in an RFC 2822 date string is used to adjust the date +value to UTC prior to storage. Therefore it is important that +this information be as accurate as possible. ++ +If the source material uses RFC 2822 style dates, +the frontend should let fast-import handle the parsing and conversion +(rather than attempting to do it itself) as the Git parser has +been well tested in the wild. ++ +Frontends should prefer the `raw` format if the source material +already uses UNIX-epoch format, can be coaxed to give dates in that +format, or its format is easily convertible to it, as there is no +ambiguity in parsing. + +`now`:: + Always use the current time and timezone. The literal + `now` must always be supplied for `<when>`. ++ +This is a toy format. The current time and timezone of this system +is always copied into the identity string at the time it is being +created by fast-import. There is no way to specify a different time or +timezone. ++ +This particular format is supplied as its short to implement and +may be useful to a process that wants to create a new commit +right now, without needing to use a working directory or +linkgit:git-update-index[1]. ++ +If separate `author` and `committer` commands are used in a `commit` +the timestamps may not match, as the system clock will be polled +twice (once for each command). The only way to ensure that both +author and committer identity information has the same timestamp +is to omit `author` (thus copying from `committer`) or to use a +date format other than `now`. + +Commands +~~~~~~~~ +fast-import accepts several commands to update the current repository +and control the current import process. More detailed discussion +(with examples) of each command follows later. + +`commit`:: + Creates a new branch or updates an existing branch by + creating a new commit and updating the branch to point at + the newly created commit. + +`tag`:: + Creates an annotated tag object from an existing commit or + branch. Lightweight tags are not supported by this command, + as they are not recommended for recording meaningful points + in time. + +`reset`:: + Reset an existing branch (or a new branch) to a specific + revision. This command must be used to change a branch to + a specific revision without making a commit on it. + +`blob`:: + Convert raw file data into a blob, for future use in a + `commit` command. This command is optional and is not + needed to perform an import. + +`checkpoint`:: + Forces fast-import to close the current packfile, generate its + unique SHA-1 checksum and index, and start a new packfile. + This command is optional and is not needed to perform + an import. + +`progress`:: + Causes fast-import to echo the entire line to its own + standard output. This command is optional and is not needed + to perform an import. + +`commit` +~~~~~~~~ +Create or update a branch with a new commit, recording one logical +change to the project. + +.... + 'commit' SP <ref> LF + mark? + ('author' SP <name> SP LT <email> GT SP <when> LF)? + 'committer' SP <name> SP LT <email> GT SP <when> LF + data + ('from' SP <committish> LF)? + ('merge' SP <committish> LF)? + (filemodify | filedelete | filecopy | filerename | filedeleteall)* + LF? +.... + +where `<ref>` is the name of the branch to make the commit on. +Typically branch names are prefixed with `refs/heads/` in +Git, so importing the CVS branch symbol `RELENG-1_0` would use +`refs/heads/RELENG-1_0` for the value of `<ref>`. The value of +`<ref>` must be a valid refname in Git. As `LF` is not valid in +a Git refname, no quoting or escaping syntax is supported here. + +A `mark` command may optionally appear, requesting fast-import to save a +reference to the newly created commit for future use by the frontend +(see below for format). It is very common for frontends to mark +every commit they create, thereby allowing future branch creation +from any imported commit. + +The `data` command following `committer` must supply the commit +message (see below for `data` command syntax). To import an empty +commit message use a 0 length data. Commit messages are free-form +and are not interpreted by Git. Currently they must be encoded in +UTF-8, as fast-import does not permit other encodings to be specified. + +Zero or more `filemodify`, `filedelete`, `filecopy`, `filerename` +and `filedeleteall` commands +may be included to update the contents of the branch prior to +creating the commit. These commands may be supplied in any order. +However it is recommended that a `filedeleteall` command precede +all `filemodify`, `filecopy` and `filerename` commands in the same +commit, as `filedeleteall` +wipes the branch clean (see below). + +The `LF` after the command is optional (it used to be required). + +`author` +^^^^^^^^ +An `author` command may optionally appear, if the author information +might differ from the committer information. If `author` is omitted +then fast-import will automatically use the committer's information for +the author portion of the commit. See below for a description of +the fields in `author`, as they are identical to `committer`. + +`committer` +^^^^^^^^^^^ +The `committer` command indicates who made this commit, and when +they made it. + +Here `<name>` is the person's display name (for example +``Com M Itter'') and `<email>` is the person's email address +(``cm@example.com''). `LT` and `GT` are the literal less-than (\x3c) +and greater-than (\x3e) symbols. These are required to delimit +the email address from the other fields in the line. Note that +`<name>` is free-form and may contain any sequence of bytes, except +`LT` and `LF`. It is typically UTF-8 encoded. + +The time of the change is specified by `<when>` using the date format +that was selected by the \--date-format=<fmt> command line option. +See ``Date Formats'' above for the set of supported formats, and +their syntax. + +`from` +^^^^^^ +The `from` command is used to specify the commit to initialize +this branch from. This revision will be the first ancestor of the +new commit. + +Omitting the `from` command in the first commit of a new branch +will cause fast-import to create that commit with no ancestor. This +tends to be desired only for the initial commit of a project. +Omitting the `from` command on existing branches is usually desired, +as the current commit on that branch is automatically assumed to +be the first ancestor of the new commit. + +As `LF` is not valid in a Git refname or SHA-1 expression, no +quoting or escaping syntax is supported within `<committish>`. + +Here `<committish>` is any of the following: + +* The name of an existing branch already in fast-import's internal branch + table. If fast-import doesn't know the name, its treated as a SHA-1 + expression. + +* A mark reference, `:<idnum>`, where `<idnum>` is the mark number. ++ +The reason fast-import uses `:` to denote a mark reference is this character +is not legal in a Git branch name. The leading `:` makes it easy +to distinguish between the mark 42 (`:42`) and the branch 42 (`42` +or `refs/heads/42`), or an abbreviated SHA-1 which happened to +consist only of base-10 digits. ++ +Marks must be declared (via `mark`) before they can be used. + +* A complete 40 byte or abbreviated commit SHA-1 in hex. + +* Any valid Git SHA-1 expression that resolves to a commit. See + ``SPECIFYING REVISIONS'' in linkgit:git-rev-parse[1] for details. + +The special case of restarting an incremental import from the +current branch value should be written as: +---- + from refs/heads/branch^0 +---- +The `{caret}0` suffix is necessary as fast-import does not permit a branch to +start from itself, and the branch is created in memory before the +`from` command is even read from the input. Adding `{caret}0` will force +fast-import to resolve the commit through Git's revision parsing library, +rather than its internal branch table, thereby loading in the +existing value of the branch. + +`merge` +^^^^^^^ +Includes one additional ancestor commit, and makes the current +commit a merge commit. An unlimited number of `merge` commands per +commit are permitted by fast-import, thereby establishing an n-way merge. +However Git's other tools never create commits with more than 15 +additional ancestors (forming a 16-way merge). For this reason +it is suggested that frontends do not use more than 15 `merge` +commands per commit. + +Here `<committish>` is any of the commit specification expressions +also accepted by `from` (see above). + +`filemodify` +^^^^^^^^^^^^ +Included in a `commit` command to add a new file or change the +content of an existing file. This command has two different means +of specifying the content of the file. + +External data format:: + The data content for the file was already supplied by a prior + `blob` command. The frontend just needs to connect it. ++ +.... + 'M' SP <mode> SP <dataref> SP <path> LF +.... ++ +Here `<dataref>` can be either a mark reference (`:<idnum>`) +set by a prior `blob` command, or a full 40-byte SHA-1 of an +existing Git blob object. + +Inline data format:: + The data content for the file has not been supplied yet. + The frontend wants to supply it as part of this modify + command. ++ +.... + 'M' SP <mode> SP 'inline' SP <path> LF + data +.... ++ +See below for a detailed description of the `data` command. + +In both formats `<mode>` is the type of file entry, specified +in octal. Git only supports the following modes: + +* `100644` or `644`: A normal (not-executable) file. The majority + of files in most projects use this mode. If in doubt, this is + what you want. +* `100755` or `755`: A normal, but executable, file. +* `120000`: A symlink, the content of the file will be the link target. + +In both formats `<path>` is the complete path of the file to be added +(if not already existing) or modified (if already existing). + +A `<path>` string must use UNIX-style directory separators (forward +slash `/`), may contain any byte other than `LF`, and must not +start with double quote (`"`). + +If an `LF` or double quote must be encoded into `<path>` shell-style +quoting should be used, e.g. `"path/with\n and \" in it"`. + +The value of `<path>` must be in canonical form. That is it must not: + +* contain an empty directory component (e.g. `foo//bar` is invalid), +* end with a directory separator (e.g. `foo/` is invalid), +* start with a directory separator (e.g. `/foo` is invalid), +* contain the special component `.` or `..` (e.g. `foo/./bar` and + `foo/../bar` are invalid). + +It is recommended that `<path>` always be encoded using UTF-8. + +`filedelete` +^^^^^^^^^^^^ +Included in a `commit` command to remove a file or recursively +delete an entire directory from the branch. If the file or directory +removal makes its parent directory empty, the parent directory will +be automatically removed too. This cascades up the tree until the +first non-empty directory or the root is reached. + +.... + 'D' SP <path> LF +.... + +here `<path>` is the complete path of the file or subdirectory to +be removed from the branch. +See `filemodify` above for a detailed description of `<path>`. + +`filecopy` +^^^^^^^^^^^^ +Recursively copies an existing file or subdirectory to a different +location within the branch. The existing file or directory must +exist. If the destination exists it will be completely replaced +by the content copied from the source. + +.... + 'C' SP <path> SP <path> LF +.... + +here the first `<path>` is the source location and the second +`<path>` is the destination. See `filemodify` above for a detailed +description of what `<path>` may look like. To use a source path +that contains SP the path must be quoted. + +A `filecopy` command takes effect immediately. Once the source +location has been copied to the destination any future commands +applied to the source location will not impact the destination of +the copy. + +`filerename` +^^^^^^^^^^^^ +Renames an existing file or subdirectory to a different location +within the branch. The existing file or directory must exist. If +the destination exists it will be replaced by the source directory. + +.... + 'R' SP <path> SP <path> LF +.... + +here the first `<path>` is the source location and the second +`<path>` is the destination. See `filemodify` above for a detailed +description of what `<path>` may look like. To use a source path +that contains SP the path must be quoted. + +A `filerename` command takes effect immediately. Once the source +location has been renamed to the destination any future commands +applied to the source location will create new files there and not +impact the destination of the rename. + +Note that a `filerename` is the same as a `filecopy` followed by a +`filedelete` of the source location. There is a slight performance +advantage to using `filerename`, but the advantage is so small +that it is never worth trying to convert a delete/add pair in +source material into a rename for fast-import. This `filerename` +command is provided just to simplify frontends that already have +rename information and don't want bother with decomposing it into a +`filecopy` followed by a `filedelete`. + +`filedeleteall` +^^^^^^^^^^^^^^^ +Included in a `commit` command to remove all files (and also all +directories) from the branch. This command resets the internal +branch structure to have no files in it, allowing the frontend +to subsequently add all interesting files from scratch. + +.... + 'deleteall' LF +.... + +This command is extremely useful if the frontend does not know +(or does not care to know) what files are currently on the branch, +and therefore cannot generate the proper `filedelete` commands to +update the content. + +Issuing a `filedeleteall` followed by the needed `filemodify` +commands to set the correct content will produce the same results +as sending only the needed `filemodify` and `filedelete` commands. +The `filedeleteall` approach may however require fast-import to use slightly +more memory per active branch (less than 1 MiB for even most large +projects); so frontends that can easily obtain only the affected +paths for a commit are encouraged to do so. + +`mark` +~~~~~~ +Arranges for fast-import to save a reference to the current object, allowing +the frontend to recall this object at a future point in time, without +knowing its SHA-1. Here the current object is the object creation +command the `mark` command appears within. This can be `commit`, +`tag`, and `blob`, but `commit` is the most common usage. + +.... + 'mark' SP ':' <idnum> LF +.... + +where `<idnum>` is the number assigned by the frontend to this mark. +The value of `<idnum>` is expressed as an ASCII decimal integer. +The value 0 is reserved and cannot be used as +a mark. Only values greater than or equal to 1 may be used as marks. + +New marks are created automatically. Existing marks can be moved +to another object simply by reusing the same `<idnum>` in another +`mark` command. + +`tag` +~~~~~ +Creates an annotated tag referring to a specific commit. To create +lightweight (non-annotated) tags see the `reset` command below. + +.... + 'tag' SP <name> LF + 'from' SP <committish> LF + 'tagger' SP <name> SP LT <email> GT SP <when> LF + data +.... + +where `<name>` is the name of the tag to create. + +Tag names are automatically prefixed with `refs/tags/` when stored +in Git, so importing the CVS branch symbol `RELENG-1_0-FINAL` would +use just `RELENG-1_0-FINAL` for `<name>`, and fast-import will write the +corresponding ref as `refs/tags/RELENG-1_0-FINAL`. + +The value of `<name>` must be a valid refname in Git and therefore +may contain forward slashes. As `LF` is not valid in a Git refname, +no quoting or escaping syntax is supported here. + +The `from` command is the same as in the `commit` command; see +above for details. + +The `tagger` command uses the same format as `committer` within +`commit`; again see above for details. + +The `data` command following `tagger` must supply the annotated tag +message (see below for `data` command syntax). To import an empty +tag message use a 0 length data. Tag messages are free-form and are +not interpreted by Git. Currently they must be encoded in UTF-8, +as fast-import does not permit other encodings to be specified. + +Signing annotated tags during import from within fast-import is not +supported. Trying to include your own PGP/GPG signature is not +recommended, as the frontend does not (easily) have access to the +complete set of bytes which normally goes into such a signature. +If signing is required, create lightweight tags from within fast-import with +`reset`, then create the annotated versions of those tags offline +with the standard linkgit:git-tag[1] process. + +`reset` +~~~~~~~ +Creates (or recreates) the named branch, optionally starting from +a specific revision. The reset command allows a frontend to issue +a new `from` command for an existing branch, or to create a new +branch from an existing commit without creating a new commit. + +.... + 'reset' SP <ref> LF + ('from' SP <committish> LF)? + LF? +.... + +For a detailed description of `<ref>` and `<committish>` see above +under `commit` and `from`. + +The `LF` after the command is optional (it used to be required). + +The `reset` command can also be used to create lightweight +(non-annotated) tags. For example: + +==== + reset refs/tags/938 + from :938 +==== + +would create the lightweight tag `refs/tags/938` referring to +whatever commit mark `:938` references. + +`blob` +~~~~~~ +Requests writing one file revision to the packfile. The revision +is not connected to any commit; this connection must be formed in +a subsequent `commit` command by referencing the blob through an +assigned mark. + +.... + 'blob' LF + mark? + data +.... + +The mark command is optional here as some frontends have chosen +to generate the Git SHA-1 for the blob on their own, and feed that +directly to `commit`. This is typically more work than its worth +however, as marks are inexpensive to store and easy to use. + +`data` +~~~~~~ +Supplies raw data (for use as blob/file content, commit messages, or +annotated tag messages) to fast-import. Data can be supplied using an exact +byte count or delimited with a terminating line. Real frontends +intended for production-quality conversions should always use the +exact byte count format, as it is more robust and performs better. +The delimited format is intended primarily for testing fast-import. + +Comment lines appearing within the `<raw>` part of `data` commands +are always taken to be part of the body of the data and are therefore +never ignored by fast-import. This makes it safe to import any +file/message content whose lines might start with `#`. + +Exact byte count format:: + The frontend must specify the number of bytes of data. ++ +.... + 'data' SP <count> LF + <raw> LF? +.... ++ +where `<count>` is the exact number of bytes appearing within +`<raw>`. The value of `<count>` is expressed as an ASCII decimal +integer. The `LF` on either side of `<raw>` is not +included in `<count>` and will not be included in the imported data. ++ +The `LF` after `<raw>` is optional (it used to be required) but +recommended. Always including it makes debugging a fast-import +stream easier as the next command always starts in column 0 +of the next line, even if `<raw>` did not end with an `LF`. + +Delimited format:: + A delimiter string is used to mark the end of the data. + fast-import will compute the length by searching for the delimiter. + This format is primarily useful for testing and is not + recommended for real data. ++ +.... + 'data' SP '<<' <delim> LF + <raw> LF + <delim> LF + LF? +.... ++ +where `<delim>` is the chosen delimiter string. The string `<delim>` +must not appear on a line by itself within `<raw>`, as otherwise +fast-import will think the data ends earlier than it really does. The `LF` +immediately trailing `<raw>` is part of `<raw>`. This is one of +the limitations of the delimited format, it is impossible to supply +a data chunk which does not have an LF as its last byte. ++ +The `LF` after `<delim> LF` is optional (it used to be required). + +`checkpoint` +~~~~~~~~~~~~ +Forces fast-import to close the current packfile, start a new one, and to +save out all current branch refs, tags and marks. + +.... + 'checkpoint' LF + LF? +.... + +Note that fast-import automatically switches packfiles when the current +packfile reaches \--max-pack-size, or 4 GiB, whichever limit is +smaller. During an automatic packfile switch fast-import does not update +the branch refs, tags or marks. + +As a `checkpoint` can require a significant amount of CPU time and +disk IO (to compute the overall pack SHA-1 checksum, generate the +corresponding index file, and update the refs) it can easily take +several minutes for a single `checkpoint` command to complete. + +Frontends may choose to issue checkpoints during extremely large +and long running imports, or when they need to allow another Git +process access to a branch. However given that a 30 GiB Subversion +repository can be loaded into Git through fast-import in about 3 hours, +explicit checkpointing may not be necessary. + +The `LF` after the command is optional (it used to be required). + +`progress` +~~~~~~~~~~ +Causes fast-import to print the entire `progress` line unmodified to +its standard output channel (file descriptor 1) when the command is +processed from the input stream. The command otherwise has no impact +on the current import, or on any of fast-import's internal state. + +.... + 'progress' SP <any> LF + LF? +.... + +The `<any>` part of the command may contain any sequence of bytes +that does not contain `LF`. The `LF` after the command is optional. +Callers may wish to process the output through a tool such as sed to +remove the leading part of the line, for example: + +==== + frontend | git-fast-import | sed 's/^progress //' +==== + +Placing a `progress` command immediately after a `checkpoint` will +inform the reader when the `checkpoint` has been completed and it +can safely access the refs that fast-import updated. + +Tips and Tricks +--------------- +The following tips and tricks have been collected from various +users of fast-import, and are offered here as suggestions. + +Use One Mark Per Commit +~~~~~~~~~~~~~~~~~~~~~~~ +When doing a repository conversion, use a unique mark per commit +(`mark :<n>`) and supply the \--export-marks option on the command +line. fast-import will dump a file which lists every mark and the Git +object SHA-1 that corresponds to it. If the frontend can tie +the marks back to the source repository, it is easy to verify the +accuracy and completeness of the import by comparing each Git +commit to the corresponding source revision. + +Coming from a system such as Perforce or Subversion this should be +quite simple, as the fast-import mark can also be the Perforce changeset +number or the Subversion revision number. + +Freely Skip Around Branches +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Don't bother trying to optimize the frontend to stick to one branch +at a time during an import. Although doing so might be slightly +faster for fast-import, it tends to increase the complexity of the frontend +code considerably. + +The branch LRU builtin to fast-import tends to behave very well, and the +cost of activating an inactive branch is so low that bouncing around +between branches has virtually no impact on import performance. + +Handling Renames +~~~~~~~~~~~~~~~~ +When importing a renamed file or directory, simply delete the old +name(s) and modify the new name(s) during the corresponding commit. +Git performs rename detection after-the-fact, rather than explicitly +during a commit. + +Use Tag Fixup Branches +~~~~~~~~~~~~~~~~~~~~~~ +Some other SCM systems let the user create a tag from multiple +files which are not from the same commit/changeset. Or to create +tags which are a subset of the files available in the repository. + +Importing these tags as-is in Git is impossible without making at +least one commit which ``fixes up'' the files to match the content +of the tag. Use fast-import's `reset` command to reset a dummy branch +outside of your normal branch space to the base commit for the tag, +then commit one or more file fixup commits, and finally tag the +dummy branch. + +For example since all normal branches are stored under `refs/heads/` +name the tag fixup branch `TAG_FIXUP`. This way it is impossible for +the fixup branch used by the importer to have namespace conflicts +with real branches imported from the source (the name `TAG_FIXUP` +is not `refs/heads/TAG_FIXUP`). + +When committing fixups, consider using `merge` to connect the +commit(s) which are supplying file revisions to the fixup branch. +Doing so will allow tools such as linkgit:git-blame[1] to track +through the real commit history and properly annotate the source +files. + +After fast-import terminates the frontend will need to do `rm .git/TAG_FIXUP` +to remove the dummy branch. + +Import Now, Repack Later +~~~~~~~~~~~~~~~~~~~~~~~~ +As soon as fast-import completes the Git repository is completely valid +and ready for use. Typically this takes only a very short time, +even for considerably large projects (100,000+ commits). + +However repacking the repository is necessary to improve data +locality and access performance. It can also take hours on extremely +large projects (especially if -f and a large \--window parameter is +used). Since repacking is safe to run alongside readers and writers, +run the repack in the background and let it finish when it finishes. +There is no reason to wait to explore your new Git project! + +If you choose to wait for the repack, don't try to run benchmarks +or performance tests until repacking is completed. fast-import outputs +suboptimal packfiles that are simply never seen in real use +situations. + +Repacking Historical Data +~~~~~~~~~~~~~~~~~~~~~~~~~ +If you are repacking very old imported data (e.g. older than the +last year), consider expending some extra CPU time and supplying +\--window=50 (or higher) when you run linkgit:git-repack[1]. +This will take longer, but will also produce a smaller packfile. +You only need to expend the effort once, and everyone using your +project will benefit from the smaller repository. + +Include Some Progress Messages +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Every once in a while have your frontend emit a `progress` message +to fast-import. The contents of the messages are entirely free-form, +so one suggestion would be to output the current month and year +each time the current commit date moves into the next month. +Your users will feel better knowing how much of the data stream +has been processed. + + +Packfile Optimization +--------------------- +When packing a blob fast-import always attempts to deltify against the last +blob written. Unless specifically arranged for by the frontend, +this will probably not be a prior version of the same file, so the +generated delta will not be the smallest possible. The resulting +packfile will be compressed, but will not be optimal. + +Frontends which have efficient access to all revisions of a +single file (for example reading an RCS/CVS ,v file) can choose +to supply all revisions of that file as a sequence of consecutive +`blob` commands. This allows fast-import to deltify the different file +revisions against each other, saving space in the final packfile. +Marks can be used to later identify individual file revisions during +a sequence of `commit` commands. + +The packfile(s) created by fast-import do not encourage good disk access +patterns. This is caused by fast-import writing the data in the order +it is received on standard input, while Git typically organizes +data within packfiles to make the most recent (current tip) data +appear before historical data. Git also clusters commits together, +speeding up revision traversal through better cache locality. + +For this reason it is strongly recommended that users repack the +repository with `git repack -a -d` after fast-import completes, allowing +Git to reorganize the packfiles for faster data access. If blob +deltas are suboptimal (see above) then also adding the `-f` option +to force recomputation of all deltas can significantly reduce the +final packfile size (30-50% smaller can be quite typical). + + +Memory Utilization +------------------ +There are a number of factors which affect how much memory fast-import +requires to perform an import. Like critical sections of core +Git, fast-import uses its own memory allocators to amortize any overheads +associated with malloc. In practice fast-import tends to amortize any +malloc overheads to 0, due to its use of large block allocations. + +per object +~~~~~~~~~~ +fast-import maintains an in-memory structure for every object written in +this execution. On a 32 bit system the structure is 32 bytes, +on a 64 bit system the structure is 40 bytes (due to the larger +pointer sizes). Objects in the table are not deallocated until +fast-import terminates. Importing 2 million objects on a 32 bit system +will require approximately 64 MiB of memory. + +The object table is actually a hashtable keyed on the object name +(the unique SHA-1). This storage configuration allows fast-import to reuse +an existing or already written object and avoid writing duplicates +to the output packfile. Duplicate blobs are surprisingly common +in an import, typically due to branch merges in the source. + +per mark +~~~~~~~~ +Marks are stored in a sparse array, using 1 pointer (4 bytes or 8 +bytes, depending on pointer size) per mark. Although the array +is sparse, frontends are still strongly encouraged to use marks +between 1 and n, where n is the total number of marks required for +this import. + +per branch +~~~~~~~~~~ +Branches are classified as active and inactive. The memory usage +of the two classes is significantly different. + +Inactive branches are stored in a structure which uses 96 or 120 +bytes (32 bit or 64 bit systems, respectively), plus the length of +the branch name (typically under 200 bytes), per branch. fast-import will +easily handle as many as 10,000 inactive branches in under 2 MiB +of memory. + +Active branches have the same overhead as inactive branches, but +also contain copies of every tree that has been recently modified on +that branch. If subtree `include` has not been modified since the +branch became active, its contents will not be loaded into memory, +but if subtree `src` has been modified by a commit since the branch +became active, then its contents will be loaded in memory. + +As active branches store metadata about the files contained on that +branch, their in-memory storage size can grow to a considerable size +(see below). + +fast-import automatically moves active branches to inactive status based on +a simple least-recently-used algorithm. The LRU chain is updated on +each `commit` command. The maximum number of active branches can be +increased or decreased on the command line with \--active-branches=. + +per active tree +~~~~~~~~~~~~~~~ +Trees (aka directories) use just 12 bytes of memory on top of the +memory required for their entries (see ``per active file'' below). +The cost of a tree is virtually 0, as its overhead amortizes out +over the individual file entries. + +per active file entry +~~~~~~~~~~~~~~~~~~~~~ +Files (and pointers to subtrees) within active trees require 52 or 64 +bytes (32/64 bit platforms) per entry. To conserve space, file and +tree names are pooled in a common string table, allowing the filename +``Makefile'' to use just 16 bytes (after including the string header +overhead) no matter how many times it occurs within the project. + +The active branch LRU, when coupled with the filename string pool +and lazy loading of subtrees, allows fast-import to efficiently import +projects with 2,000+ branches and 45,114+ files in a very limited +memory footprint (less than 2.7 MiB per active branch). + + +Author +------ +Written by Shawn O. Pearce <spearce@spearce.org>. + +Documentation +-------------- +Documentation by Shawn O. Pearce <spearce@spearce.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt new file mode 100644 index 0000000..2b8ffe5 --- /dev/null +++ b/Documentation/git-fetch-pack.txt @@ -0,0 +1,96 @@ +git-fetch-pack(1) +================= + +NAME +---- +git-fetch-pack - Receive missing objects from another repository + + +SYNOPSIS +-------- +'git-fetch-pack' [--all] [--quiet|-q] [--keep|-k] [--thin] [--upload-pack=<git-upload-pack>] [--depth=<n>] [--no-progress] [-v] [<host>:]<directory> [<refs>...] + +DESCRIPTION +----------- +Usually you would want to use linkgit:git-fetch[1] which is a +higher level wrapper of this command instead. + +Invokes 'git-upload-pack' on a potentially remote repository, +and asks it to send objects missing from this repository, to +update the named heads. The list of commits available locally +is found out by scanning local $GIT_DIR/refs/ and sent to +'git-upload-pack' running on the other end. + +This command degenerates to download everything to complete the +asked refs from the remote side when the local side does not +have a common ancestor commit. + + +OPTIONS +------- +\--all:: + Fetch all remote refs. + +\--quiet, \-q:: + Pass '-q' flag to 'git-unpack-objects'; this makes the + cloning process less verbose. + +\--keep, \-k:: + Do not invoke 'git-unpack-objects' on received data, but + create a single packfile out of it instead, and store it + in the object database. If provided twice then the pack is + locked against repacking. + +\--thin:: + Spend extra cycles to minimize the number of objects to be sent. + Use it on slower connection. + +\--upload-pack=<git-upload-pack>:: + Use this to specify the path to 'git-upload-pack' on the + remote side, if is not found on your $PATH. + Installations of sshd ignores the user's environment + setup scripts for login shells (e.g. .bash_profile) and + your privately installed git may not be found on the system + default $PATH. Another workaround suggested is to set + up your $PATH in ".bashrc", but this flag is for people + who do not want to pay the overhead for non-interactive + shells by having a lean .bashrc file (they set most of + the things up in .bash_profile). + +\--exec=<git-upload-pack>:: + Same as \--upload-pack=<git-upload-pack>. + +\--depth=<n>:: + Limit fetching to ancestor-chains not longer than n. + +\--no-progress:: + Do not show the progress. + +\-v:: + Run verbosely. + +<host>:: + A remote host that houses the repository. When this + part is specified, 'git-upload-pack' is invoked via + ssh. + +<directory>:: + The repository to sync from. + +<refs>...:: + The remote heads to update from. This is relative to + $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When + unspecified, update from all heads the remote side has. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt new file mode 100644 index 0000000..d982f96 --- /dev/null +++ b/Documentation/git-fetch.txt @@ -0,0 +1,56 @@ +git-fetch(1) +============ + +NAME +---- +git-fetch - Download objects and refs from another repository + + +SYNOPSIS +-------- +'git-fetch' <options> <repository> <refspec>... + + +DESCRIPTION +----------- +Fetches named heads or tags from another repository, along with +the objects necessary to complete them. + +The ref names and their object names of fetched refs are stored +in `.git/FETCH_HEAD`. This information is left for a later merge +operation done by "git merge". + +When <refspec> stores the fetched result in tracking branches, +the tags that point at these branches are automatically +followed. This is done by first fetching from the remote using +the given <refspec>s, and if the repository has objects that are +pointed by remote tags that it does not yet have, then fetch +those missing tags. If the other end has tags that point at +branches you are not interested in, you will not get them. + + +OPTIONS +------- +include::fetch-options.txt[] + +include::pull-fetch-param.txt[] + +include::urls-remotes.txt[] + +SEE ALSO +-------- +linkgit:git-pull[1] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net> + +Documentation +------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt new file mode 100644 index 0000000..543a1cf --- /dev/null +++ b/Documentation/git-filter-branch.txt @@ -0,0 +1,309 @@ +git-filter-branch(1) +==================== + +NAME +---- +git-filter-branch - Rewrite branches + +SYNOPSIS +-------- +[verse] +'git-filter-branch' [--env-filter <command>] [--tree-filter <command>] + [--index-filter <command>] [--parent-filter <command>] + [--msg-filter <command>] [--commit-filter <command>] + [--tag-name-filter <command>] [--subdirectory-filter <directory>] + [--original <namespace>] [-d <directory>] [-f | --force] + [<rev-list options>...] + +DESCRIPTION +----------- +Lets you rewrite git revision history by rewriting the branches mentioned +in the <rev-list options>, applying custom filters on each revision. +Those filters can modify each tree (e.g. removing a file or running +a perl rewrite on all files) or information about each commit. +Otherwise, all information (including original commit times or merge +information) will be preserved. + +The command will only rewrite the _positive_ refs mentioned in the +command line (i.e. if you pass 'a..b', only 'b' will be rewritten). +If you specify no filters, the commits will be recommitted without any +changes, which would normally have no effect. Nevertheless, this may be +useful in the future for compensating for some git bugs or such, +therefore such a usage is permitted. + +*WARNING*! The rewritten history will have different object names for all +the objects and will not converge with the original branch. You will not +be able to easily push and distribute the rewritten branch on top of the +original branch. Please do not use this command if you do not know the +full implications, and avoid using it anyway, if a simple single commit +would suffice to fix your problem. + +Always verify that the rewritten version is correct: The original refs, +if different from the rewritten ones, will be stored in the namespace +'refs/original/'. + +Note that since this operation is extensively I/O expensive, it might +be a good idea to redirect the temporary directory off-disk with the +'-d' option, e.g. on tmpfs. Reportedly the speedup is very noticeable. + + +Filters +~~~~~~~ + +The filters are applied in the order as listed below. The <command> +argument is always evaluated in shell using the 'eval' command (with the +notable exception of the commit filter, for technical reasons). +Prior to that, the $GIT_COMMIT environment variable will be set to contain +the id of the commit being rewritten. Also, GIT_AUTHOR_NAME, +GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME, GIT_COMMITTER_EMAIL, +and GIT_COMMITTER_DATE are set according to the current commit. If any +evaluation of <command> returns a non-zero exit status, the whole operation +will be aborted. + +A 'map' function is available that takes an "original sha1 id" argument +and outputs a "rewritten sha1 id" if the commit has been already +rewritten, and "original sha1 id" otherwise; the 'map' function can +return several ids on separate lines if your commit filter emitted +multiple commits. + + +OPTIONS +------- + +--env-filter <command>:: + This is the filter for modifying the environment in which + the commit will be performed. Specifically, you might want + to rewrite the author/committer name/email/time environment + variables (see linkgit:git-commit[1] for details). Do not forget + to re-export the variables. + +--tree-filter <command>:: + This is the filter for rewriting the tree and its contents. + The argument is evaluated in shell with the working + directory set to the root of the checked out tree. The new tree + is then used as-is (new files are auto-added, disappeared files + are auto-removed - neither .gitignore files nor any other ignore + rules *HAVE ANY EFFECT*!). + +--index-filter <command>:: + This is the filter for rewriting the index. It is similar to the + tree filter but does not check out the tree, which makes it much + faster. For hairy cases, see linkgit:git-update-index[1]. + +--parent-filter <command>:: + This is the filter for rewriting the commit's parent list. + It will receive the parent string on stdin and shall output + the new parent string on stdout. The parent string is in + a format accepted by linkgit:git-commit-tree[1]: empty for + the initial commit, "-p parent" for a normal commit and + "-p parent1 -p parent2 -p parent3 ..." for a merge commit. + +--msg-filter <command>:: + This is the filter for rewriting the commit messages. + The argument is evaluated in the shell with the original + commit message on standard input; its standard output is + used as the new commit message. + +--commit-filter <command>:: + This is the filter for performing the commit. + If this filter is specified, it will be called instead of the + linkgit:git-commit-tree[1] command, with arguments of the form + "<TREE_ID> [-p <PARENT_COMMIT_ID>]..." and the log message on + stdin. The commit id is expected on stdout. ++ +As a special extension, the commit filter may emit multiple +commit ids; in that case, ancestors of the original commit will +have all of them as parents. ++ +You can use the 'map' convenience function in this filter, and other +convenience functions, too. For example, calling 'skip_commit "$@"' +will leave out the current commit (but not its changes! If you want +that, use linkgit:git-rebase[1] instead). + +--tag-name-filter <command>:: + This is the filter for rewriting tag names. When passed, + it will be called for every tag ref that points to a rewritten + object (or to a tag object which points to a rewritten object). + The original tag name is passed via standard input, and the new + tag name is expected on standard output. ++ +The original tags are not deleted, but can be overwritten; +use "--tag-name-filter cat" to simply update the tags. In this +case, be very careful and make sure you have the old tags +backed up in case the conversion has run afoul. ++ +Note that there is currently no support for proper rewriting of +tag objects; in layman terms, if the tag has a message or signature +attached, the rewritten tag won't have it. Sorry. (It is by +definition impossible to preserve signatures at any rate.) + +--subdirectory-filter <directory>:: + Only look at the history which touches the given subdirectory. + The result will contain that directory (and only that) as its + project root. + +--original <namespace>:: + Use this option to set the namespace where the original commits + will be stored. The default value is 'refs/original'. + +-d <directory>:: + Use this option to set the path to the temporary directory used for + rewriting. When applying a tree filter, the command needs to + temporary checkout the tree to some directory, which may consume + considerable space in case of large projects. By default it + does this in the '.git-rewrite/' directory but you can override + that choice by this parameter. + +-f|--force:: + `git filter-branch` refuses to start with an existing temporary + directory or when there are already refs starting with + 'refs/original/', unless forced. + +<rev-list-options>:: + When options are given after the new branch name, they will + be passed to linkgit:git-rev-list[1]. Only commits in the resulting + output will be filtered, although the filtered commits can still + reference parents which are outside of that set. + + +Examples +-------- + +Suppose you want to remove a file (containing confidential information +or copyright violation) from all commits: + +------------------------------------------------------- +git filter-branch --tree-filter 'rm filename' HEAD +------------------------------------------------------- + +A significantly faster version: + +-------------------------------------------------------------------------- +git filter-branch --index-filter 'git update-index --remove filename' HEAD +-------------------------------------------------------------------------- + +Now, you will get the rewritten history saved in HEAD. + +To set a commit (which typically is at the tip of another +history) to be the parent of the current initial commit, in +order to paste the other history behind the current history: + +------------------------------------------------------------------- +git filter-branch --parent-filter 'sed "s/^\$/-p <graft-id>/"' HEAD +------------------------------------------------------------------- + +(if the parent string is empty - which happens when we are dealing with +the initial commit - add graftcommit as a parent). Note that this assumes +history with a single root (that is, no merge without common ancestors +happened). If this is not the case, use: + +-------------------------------------------------------------------------- +git filter-branch --parent-filter \ + 'test $GIT_COMMIT = <commit-id> && echo "-p <graft-id>" || cat' HEAD +-------------------------------------------------------------------------- + +or even simpler: + +----------------------------------------------- +echo "$commit-id $graft-id" >> .git/info/grafts +git filter-branch $graft-id..HEAD +----------------------------------------------- + +To remove commits authored by "Darl McBribe" from the history: + +------------------------------------------------------------------------------ +git filter-branch --commit-filter ' + if [ "$GIT_AUTHOR_NAME" = "Darl McBribe" ]; + then + skip_commit "$@"; + else + git commit-tree "$@"; + fi' HEAD +------------------------------------------------------------------------------ + +The function 'skip_commit' is defined as follows: + +-------------------------- +skip_commit() +{ + shift; + while [ -n "$1" ]; + do + shift; + map "$1"; + shift; + done; +} +-------------------------- + +The shift magic first throws away the tree id and then the -p +parameters. Note that this handles merges properly! In case Darl +committed a merge between P1 and P2, it will be propagated properly +and all children of the merge will become merge commits with P1,P2 +as their parents instead of the merge commit. + +You can rewrite the commit log messages using `--message-filter`. For +example, `git-svn-id` strings in a repository created by `git-svn` can +be removed this way: + +------------------------------------------------------- +git filter-branch --message-filter ' + sed -e "/^git-svn-id:/d" +' +------------------------------------------------------- + +To restrict rewriting to only part of the history, specify a revision +range in addition to the new branch name. The new branch name will +point to the top-most revision that a 'git rev-list' of this range +will print. + +*NOTE* the changes introduced by the commits, and which are not reverted +by subsequent commits, will still be in the rewritten branch. If you want +to throw out _changes_ together with the commits, you should use the +interactive mode of linkgit:git-rebase[1]. + + +Consider this history: + +------------------ + D--E--F--G--H + / / +A--B-----C +------------------ + +To rewrite only commits D,E,F,G,H, but leave A, B and C alone, use: + +-------------------------------- +git filter-branch ... C..H +-------------------------------- + +To rewrite commits E,F,G,H, use one of these: + +---------------------------------------- +git filter-branch ... C..H --not D +git filter-branch ... D..H --not C +---------------------------------------- + +To move the whole tree into a subdirectory, or remove it from there: + +--------------------------------------------------------------- +git filter-branch --index-filter \ + 'git ls-files -s | sed "s-\t-&newsubdir/-" | + GIT_INDEX_FILE=$GIT_INDEX_FILE.new \ + git update-index --index-info && + mv $GIT_INDEX_FILE.new $GIT_INDEX_FILE' HEAD +--------------------------------------------------------------- + + +Author +------ +Written by Petr "Pasky" Baudis <pasky@suse.cz>, +and the git list <git@vger.kernel.org> + +Documentation +-------------- +Documentation by Petr Baudis and the git list. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt new file mode 100644 index 0000000..8615ae3 --- /dev/null +++ b/Documentation/git-fmt-merge-msg.txt @@ -0,0 +1,62 @@ +git-fmt-merge-msg(1) +==================== + +NAME +---- +git-fmt-merge-msg - Produce a merge commit message + + +SYNOPSIS +-------- +[verse] +git-fmt-merge-msg [--summary | --no-summary] <$GIT_DIR/FETCH_HEAD +git-fmt-merge-msg [--summary | --no-summary] -F <file> + +DESCRIPTION +----------- +Takes the list of merged objects on stdin and produces a suitable +commit message to be used for the merge commit, usually to be +passed as the '<merge-message>' argument of `git-merge`. + +This script is intended mostly for internal use by scripts +automatically invoking `git-merge`. + +OPTIONS +------- + +--summary:: + In addition to branch names, populate the log message with + one-line descriptions from the actual commits that are being + merged. + +--no-summary:: + Do not list one-line descriptions from the actual commits being + merged. + +--file <file>, -F <file>:: + Take the list of merged objects from <file> instead of + stdin. + +CONFIGURATION +------------- + +merge.summary:: + Whether to include summaries of merged commits in newly + merge commit messages. False by default. + +SEE ALSO +-------- +linkgit:git-merge[1] + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Petr Baudis, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt new file mode 100644 index 0000000..f1f90cc --- /dev/null +++ b/Documentation/git-for-each-ref.txt @@ -0,0 +1,193 @@ +git-for-each-ref(1) +=================== + +NAME +---- +git-for-each-ref - Output information on each ref + +SYNOPSIS +-------- +[verse] +'git-for-each-ref' [--count=<count>]\* + [--shell|--perl|--python|--tcl] + [--sort=<key>]\* [--format=<format>] [<pattern>] + +DESCRIPTION +----------- + +Iterate over all refs that match `<pattern>` and show them +according to the given `<format>`, after sorting them according +to the given set of `<key>`. If `<max>` is given, stop after +showing that many refs. The interpolated values in `<format>` +can optionally be quoted as string literals in the specified +host language allowing their direct evaluation in that language. + +OPTIONS +------- +<count>:: + By default the command shows all refs that match + `<pattern>`. This option makes it stop after showing + that many refs. + +<key>:: + A field name to sort on. Prefix `-` to sort in + descending order of the value. When unspecified, + `refname` is used. More than one sort keys can be + given. + +<format>:: + A string that interpolates `%(fieldname)` from the + object pointed at by a ref being shown. If `fieldname` + is prefixed with an asterisk (`*`) and the ref points + at a tag object, the value for the field in the object + tag refers is used. When unspecified, defaults to + `%(objectname) SPC %(objecttype) TAB %(refname)`. + It also interpolates `%%` to `%`, and `%xx` where `xx` + are hex digits interpolates to character with hex code + `xx`; for example `%00` interpolates to `\0` (NUL), + `%09` to `\t` (TAB) and `%0a` to `\n` (LF). + +<pattern>:: + If given, the name of the ref is matched against this + using fnmatch(3). Refs that do not match the pattern + are not shown. + +--shell, --perl, --python, --tcl:: + If given, strings that substitute `%(fieldname)` + placeholders are quoted as string literals suitable for + the specified host language. This is meant to produce + a scriptlet that can directly be `eval`ed. + + +FIELD NAMES +----------- + +Various values from structured fields in referenced objects can +be used to interpolate into the resulting output, or as sort +keys. + +For all objects, the following names can be used: + +refname:: + The name of the ref (the part after $GIT_DIR/). + +objecttype:: + The type of the object (`blob`, `tree`, `commit`, `tag`). + +objectsize:: + The size of the object (the same as `git-cat-file -s` reports). + +objectname:: + The object name (aka SHA-1). + +In addition to the above, for commit and tag objects, the header +field names (`tree`, `parent`, `object`, `type`, and `tag`) can +be used to specify the value in the header field. + +Fields that have name-email-date tuple as its value (`author`, +`committer`, and `tagger`) can be suffixed with `name`, `email`, +and `date` to extract the named component. + +The first line of the message in a commit and tag object is +`subject`, the remaining lines are `body`. The whole message +is `contents`. + +For sorting purposes, fields with numeric values sort in numeric +order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). +All other fields are used to sort in their byte-value order. + +In any case, a field name that refers to a field inapplicable to +the object referred by the ref does not cause an error. It +returns an empty string instead. + +As a special case for the date-type fields, you may specify a format for +the date by adding one of `:default`, `:relative`, `:short`, `:local`, +`:iso8601` or `:rfc2822` to the end of the fieldname; e.g. +`%(taggerdate:relative)`. + + +EXAMPLES +-------- + +An example directly producing formatted text. Show the most recent +3 tagged commits:: + +------------ +#!/bin/sh + +git-for-each-ref --count=3 --sort='-*authordate' \ +--format='From: %(*authorname) %(*authoremail) +Subject: %(*subject) +Date: %(*authordate) +Ref: %(*refname) + +%(*body) +' 'refs/tags' +------------ + + +A simple example showing the use of shell eval on the output, +demonstrating the use of --shell. List the prefixes of all heads:: +------------ +#!/bin/sh + +git-for-each-ref --shell --format="ref=%(refname)" refs/heads | \ +while read entry +do + eval "$entry" + echo `dirname $ref` +done +------------ + + +A bit more elaborate report on tags, demonstrating that the format +may be an entire script:: +------------ +#!/bin/sh + +fmt=' + r=%(refname) + t=%(*objecttype) + T=${r#refs/tags/} + + o=%(*objectname) + n=%(*authorname) + e=%(*authoremail) + s=%(*subject) + d=%(*authordate) + b=%(*body) + + kind=Tag + if test "z$t" = z + then + # could be a lightweight tag + t=%(objecttype) + kind="Lightweight tag" + o=%(objectname) + n=%(authorname) + e=%(authoremail) + s=%(subject) + d=%(authordate) + b=%(body) + fi + echo "$kind $T points at a $t object $o" + if test "z$t" = zcommit + then + echo "The commit was authored by $n $e +at $d, and titled + + $s + +Its message reads as: +" + echo "$b" | sed -e "s/^/ /" + echo + fi +' + +eval=`git-for-each-ref --shell --format="$fmt" \ + --sort='*objecttype' \ + --sort=-taggerdate \ + refs/tags` +eval "$eval" +------------ diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt new file mode 100644 index 0000000..651efe6 --- /dev/null +++ b/Documentation/git-format-patch.txt @@ -0,0 +1,208 @@ +git-format-patch(1) +=================== + +NAME +---- +git-format-patch - Prepare patches for e-mail submission + + +SYNOPSIS +-------- +[verse] +'git-format-patch' [-k] [-o <dir> | --stdout] [--thread] + [--attach[=<boundary>] | --inline[=<boundary>]] + [-s | --signoff] [<common diff options>] + [-n | --numbered | -N | --no-numbered] + [--start-number <n>] [--numbered-files] + [--in-reply-to=Message-Id] [--suffix=.<sfx>] + [--ignore-if-in-upstream] + [--subject-prefix=Subject-Prefix] + [ <since> | <revision range> ] + +DESCRIPTION +----------- + +Prepare each commit with its patch in +one file per commit, formatted to resemble UNIX mailbox format. +The output of this command is convenient for e-mail submission or +for use with linkgit:git-am[1]. + +There are two ways to specify which commits to operate on. + +1. A single commit, <since>, specifies that the commits leading + to the tip of the current branch that are not in the history + that leads to the <since> to be output. + +2. Generic <revision range> expression (see "SPECIFYING + REVISIONS" section in linkgit:git-rev-parse[1]) means the + commits in the specified range. + +A single commit, when interpreted as a <revision range> +expression, means "everything that leads to that commit", but +if you write 'git format-patch <commit>', the previous rule +applies to that command line and you do not get "everything +since the beginning of the time". If you want to format +everything since project inception to one commit, say "git +format-patch \--root <commit>" to make it clear that it is the +latter case. + +By default, each output file is numbered sequentially from 1, and uses the +first line of the commit message (massaged for pathname safety) as +the filename. With the --numbered-files option, the output file names +will only be numbers, without the first line of the commit appended. +The names of the output files are printed to standard +output, unless the --stdout option is specified. + +If -o is specified, output files are created in <dir>. Otherwise +they are created in the current working directory. + +If -n is specified, instead of "[PATCH] Subject", the first line +is formatted as "[PATCH n/m] Subject". + +If given --thread, git-format-patch will generate In-Reply-To and +References headers to make the second and subsequent patch mails appear +as replies to the first mail; this also generates a Message-Id header to +reference. + +OPTIONS +------- +:git-format-patch: 1 +include::diff-options.txt[] + +-<n>:: + Limits the number of patches to prepare. + +-o|--output-directory <dir>:: + Use <dir> to store the resulting files, instead of the + current working directory. + +-n|--numbered:: + Name output in '[PATCH n/m]' format. + +-N|--no-numbered:: + Name output in '[PATCH]' format. + +--start-number <n>:: + Start numbering the patches at <n> instead of 1. + +--numbered-files:: + Output file names will be a simple number sequence + without the default first line of the commit appended. + Mutually exclusive with the --stdout option. + +-k|--keep-subject:: + Do not strip/add '[PATCH]' from the first line of the + commit log message. + +-s|--signoff:: + Add `Signed-off-by:` line to the commit message, using + the committer identity of yourself. + +--stdout:: + Print all commits to the standard output in mbox format, + instead of creating a file for each one. + +--attach[=<boundary>]:: + Create multipart/mixed attachment, the first part of + which is the commit message and the patch itself in the + second part, with "Content-Disposition: attachment". + +--inline[=<boundary>]:: + Create multipart/mixed attachment, the first part of + which is the commit message and the patch itself in the + second part, with "Content-Disposition: inline". + +--thread:: + Add In-Reply-To and References headers to make the second and + subsequent mails appear as replies to the first. Also generates + the Message-Id header to reference. + +--in-reply-to=Message-Id:: + Make the first mail (or all the mails with --no-thread) appear as a + reply to the given Message-Id, which avoids breaking threads to + provide a new patch series. + +--ignore-if-in-upstream:: + Do not include a patch that matches a commit in + <until>..<since>. This will examine all patches reachable + from <since> but not from <until> and compare them with the + patches being generated, and any patch that matches is + ignored. + +--subject-prefix=<Subject-Prefix>:: + Instead of the standard '[PATCH]' prefix in the subject + line, instead use '[<Subject-Prefix>]'. This + allows for useful naming of a patch series, and can be + combined with the --numbered option. + +--suffix=.<sfx>:: + Instead of using `.patch` as the suffix for generated + filenames, use specified suffix. A common alternative is + `--suffix=.txt`. ++ +Note that you would need to include the leading dot `.` if you +want a filename like `0001-description-of-my-change.patch`, and +the first letter does not have to be a dot. Leaving it empty would +not add any suffix. + +CONFIGURATION +------------- +You can specify extra mail header lines to be added to each message +in the repository configuration, new defaults for the subject prefix +and file suffix, and number patches when outputting more than one. + +------------ +[format] + headers = "Organization: git-foo\n" + subjectprefix = CHANGE + suffix = .txt + numbered = auto +------------ + + +EXAMPLES +-------- + +git-format-patch -k --stdout R1..R2 | git-am -3 -k:: + Extract commits between revisions R1 and R2, and apply + them on top of the current branch using `git-am` to + cherry-pick them. + +git-format-patch origin:: + Extract all commits which are in the current branch but + not in the origin branch. For each commit a separate file + is created in the current directory. + +git-format-patch \--root origin:: + Extract all commits that lead to 'origin' since the + inception of the project. + +git-format-patch -M -B origin:: + The same as the previous one. Additionally, it detects + and handles renames and complete rewrites intelligently to + produce a renaming patch. A renaming patch reduces the + amount of text output, and generally makes it easier to + review it. Note that the "patch" program does not + understand renaming patches, so use it only when you know + the recipient uses git to apply your patch. + +git-format-patch -3:: + Extract three topmost commits from the current branch + and format them as e-mailable patches. + +See Also +-------- +linkgit:git-am[1], linkgit:git-send-email[1] + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-fsck-objects.txt b/Documentation/git-fsck-objects.txt new file mode 100644 index 0000000..6e9f717 --- /dev/null +++ b/Documentation/git-fsck-objects.txt @@ -0,0 +1,17 @@ +git-fsck-objects(1) +=================== + +NAME +---- +git-fsck-objects - Verifies the connectivity and validity of the objects in the database + + +SYNOPSIS +-------- +'git-fsck-objects' ... + +DESCRIPTION +----------- + +This is a synonym for linkgit:git-fsck[1]. Please refer to the +documentation of that command. diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt new file mode 100644 index 0000000..f16cb98 --- /dev/null +++ b/Documentation/git-fsck.txt @@ -0,0 +1,153 @@ +git-fsck(1) +=========== + +NAME +---- +git-fsck - Verifies the connectivity and validity of the objects in the database + + +SYNOPSIS +-------- +[verse] +'git-fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs] + [--full] [--strict] [--verbose] [--lost-found] [<object>*] + +DESCRIPTION +----------- +Verifies the connectivity and validity of the objects in the database. + +OPTIONS +------- +<object>:: + An object to treat as the head of an unreachability trace. ++ +If no objects are given, git-fsck defaults to using the +index file and all SHA1 references in .git/refs/* as heads. + +--unreachable:: + Print out objects that exist but that aren't readable from any + of the reference nodes. + +--root:: + Report root nodes. + +--tags:: + Report tags. + +--cache:: + Consider any object recorded in the index also as a head node for + an unreachability trace. + +--no-reflogs:: + Do not consider commits that are referenced only by an + entry in a reflog to be reachable. This option is meant + only to search for commits that used to be in a ref, but + now aren't, but are still in that corresponding reflog. + +--full:: + Check not just objects in GIT_OBJECT_DIRECTORY + ($GIT_DIR/objects), but also the ones found in alternate + object pools listed in GIT_ALTERNATE_OBJECT_DIRECTORIES + or $GIT_DIR/objects/info/alternates, + and in packed git archives found in $GIT_DIR/objects/pack + and corresponding pack subdirectories in alternate + object pools. + +--strict:: + Enable more strict checking, namely to catch a file mode + recorded with g+w bit set, which was created by older + versions of git. Existing repositories, including the + Linux kernel, git itself, and sparse repository have old + objects that triggers this check, but it is recommended + to check new projects with this flag. + +--verbose:: + Be chatty. + +--lost-found:: + Write dangling objects into .git/lost-found/commit/ or + .git/lost-found/other/, depending on type. If the object is + a blob, the contents are written into the file, rather than + its object name. + +It tests SHA1 and general object sanity, and it does full tracking of +the resulting reachability and everything else. It prints out any +corruption it finds (missing or bad objects), and if you use the +'--unreachable' flag it will also print out objects that exist but +that aren't readable from any of the specified head nodes. + +So for example + + git-fsck --unreachable HEAD $(cat .git/refs/heads/*) + +will do quite a _lot_ of verification on the tree. There are a few +extra validity tests to be added (make sure that tree objects are +sorted properly etc), but on the whole if "git-fsck" is happy, you +do have a valid tree. + +Any corrupt objects you will have to find in backups or other archives +(i.e., you can just remove them and do an "rsync" with some other site in +the hopes that somebody else has the object you have corrupted). + +Of course, "valid tree" doesn't mean that it wasn't generated by some +evil person, and the end result might be crap. git is a revision +tracking system, not a quality assurance system ;) + +Extracted Diagnostics +--------------------- + +expect dangling commits - potential heads - due to lack of head information:: + You haven't specified any nodes as heads so it won't be + possible to differentiate between un-parented commits and + root nodes. + +missing sha1 directory '<dir>':: + The directory holding the sha1 objects is missing. + +unreachable <type> <object>:: + The <type> object <object>, isn't actually referred to directly + or indirectly in any of the trees or commits seen. This can + mean that there's another root node that you're not specifying + or that the tree is corrupt. If you haven't missed a root node + then you might as well delete unreachable nodes since they + can't be used. + +missing <type> <object>:: + The <type> object <object>, is referred to but isn't present in + the database. + +dangling <type> <object>:: + The <type> object <object>, is present in the database but never + 'directly' used. A dangling commit could be a root node. + +warning: git-fsck: tree <tree> has full pathnames in it:: + And it shouldn't... + +sha1 mismatch <object>:: + The database has an object who's sha1 doesn't match the + database value. + This indicates a serious data integrity problem. + +Environment Variables +--------------------- + +GIT_OBJECT_DIRECTORY:: + used to specify the object database root (usually $GIT_DIR/objects) + +GIT_INDEX_FILE:: + used to specify the index file of the index + +GIT_ALTERNATE_OBJECT_DIRECTORIES:: + used to specify additional object database roots (usually unset) + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt new file mode 100644 index 0000000..4b2dfef --- /dev/null +++ b/Documentation/git-gc.txt @@ -0,0 +1,117 @@ +git-gc(1) +========= + +NAME +---- +git-gc - Cleanup unnecessary files and optimize the local repository + + +SYNOPSIS +-------- +'git-gc' [--prune] [--aggressive] [--auto] + +DESCRIPTION +----------- +Runs a number of housekeeping tasks within the current repository, +such as compressing file revisions (to reduce disk space and increase +performance) and removing unreachable objects which may have been +created from prior invocations of linkgit:git-add[1]. + +Users are encouraged to run this task on a regular basis within +each repository to maintain good disk space utilization and good +operating performance. Some git commands may automatically run +`git-gc`; see the `--auto` flag below for details. + +OPTIONS +------- + +--prune:: + Usually `git-gc` packs refs, expires old reflog entries, + packs loose objects, + and removes old 'rerere' records. Removal + of unreferenced loose objects is an unsafe operation + while other git operations are in progress, so it is not + done by default. Pass this option if you want it, and only + when you know nobody else is creating new objects in the + repository at the same time (e.g. never use this option + in a cron script). + +--aggressive:: + Usually 'git-gc' runs very quickly while providing good disk + space utilization and performance. This option will cause + git-gc to more aggressively optimize the repository at the expense + of taking much more time. The effects of this optimization are + persistent, so this option only needs to be used occasionally; every + few hundred changesets or so. + +--auto:: + With this option, `git gc` checks whether any housekeeping is + required; if not, it exits without performing any work. + Some git commands run `git gc --auto` after performing + operations that could create many loose objects. ++ +Housekeeping is required if there are too many loose objects or +too many packs in the repository. If the number of loose objects +exceeds the value of the `gc.auto` configuration variable, then +all loose objects are combined into a single pack using +`git-repack -d -l`. Setting the value of `gc.auto` to 0 +disables automatic packing of loose objects. ++ +If the number of packs exceeds the value of `gc.autopacklimit`, +then existing packs (except those marked with a `.keep` file) +are consolidated into a single pack by using the `-A` option of +`git-repack`. Setting `gc.autopacklimit` to 0 disables +automatic consolidation of packs. + +Configuration +------------- + +The optional configuration variable 'gc.reflogExpire' can be +set to indicate how long historical entries within each branch's +reflog should remain available in this repository. The setting is +expressed as a length of time, for example '90 days' or '3 months'. +It defaults to '90 days'. + +The optional configuration variable 'gc.reflogExpireUnreachable' +can be set to indicate how long historical reflog entries which +are not part of the current branch should remain available in +this repository. These types of entries are generally created as +a result of using `git commit \--amend` or `git rebase` and are the +commits prior to the amend or rebase occurring. Since these changes +are not part of the current project most users will want to expire +them sooner. This option defaults to '30 days'. + +The optional configuration variable 'gc.rerereresolved' indicates +how long records of conflicted merge you resolved earlier are +kept. This defaults to 60 days. + +The optional configuration variable 'gc.rerereunresolved' indicates +how long records of conflicted merge you have not resolved are +kept. This defaults to 15 days. + +The optional configuration variable 'gc.packrefs' determines if +`git gc` runs `git-pack-refs`. This can be set to "nobare" to enable +it within all non-bare repos or it can be set to a boolean value. +This defaults to true. + +The optional configuration variable 'gc.aggressiveWindow' controls how +much time is spent optimizing the delta compression of the objects in +the repository when the --aggressive option is specified. The larger +the value, the more time is spent optimizing the delta compression. See +the documentation for the --window' option in linkgit:git-repack[1] for +more details. This defaults to 10. + +See Also +-------- +linkgit:git-prune[1] +linkgit:git-reflog[1] +linkgit:git-repack[1] +linkgit:git-rerere[1] + +Author +------ +Written by Shawn O. Pearce <spearce@spearce.org> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-get-tar-commit-id.txt b/Documentation/git-get-tar-commit-id.txt new file mode 100644 index 0000000..dea4149 --- /dev/null +++ b/Documentation/git-get-tar-commit-id.txt @@ -0,0 +1,36 @@ +git-get-tar-commit-id(1) +======================== + +NAME +---- +git-get-tar-commit-id - Extract commit ID from an archive created using git-archive + + +SYNOPSIS +-------- +'git-get-tar-commit-id' < <tarfile> + + +DESCRIPTION +----------- +Acts as a filter, extracting the commit ID stored in archives created by +linkgit:git-archive[1]. It reads only the first 1024 bytes of input, thus its +runtime is not influenced by the size of <tarfile> very much. + +If no commit ID is found, git-get-tar-commit-id quietly exists with a +return code of 1. This can happen if <tarfile> had not been created +using git-archive or if the first parameter of git-archive had been +a tree ID instead of a commit ID or tag. + + +Author +------ +Written by Rene Scharfe <rene.scharfe@lsrfire.ath.cx> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt new file mode 100644 index 0000000..f3cb24f --- /dev/null +++ b/Documentation/git-grep.txt @@ -0,0 +1,146 @@ +git-grep(1) +=========== + +NAME +---- +git-grep - Print lines matching a pattern + + +SYNOPSIS +-------- +[verse] +'git-grep' [--cached] + [-a | --text] [-I] [-i | --ignore-case] [-w | --word-regexp] + [-v | --invert-match] [-h|-H] [--full-name] + [-E | --extended-regexp] [-G | --basic-regexp] + [-F | --fixed-strings] [-n] + [-l | --files-with-matches] [-L | --files-without-match] + [-c | --count] [--all-match] + [-A <post-context>] [-B <pre-context>] [-C <context>] + [-f <file>] [-e] <pattern> + [--and|--or|--not|(|)|-e <pattern>...] [<tree>...] + [--] [<path>...] + +DESCRIPTION +----------- +Look for specified patterns in the working tree files, blobs +registered in the index file, or given tree objects. + + +OPTIONS +------- +--cached:: + Instead of searching in the working tree files, check + the blobs registered in the index file. + +-a | --text:: + Process binary files as if they were text. + +-i | --ignore-case:: + Ignore case differences between the patterns and the + files. + +-I:: + Don't match the pattern in binary files. + +-w | --word-regexp:: + Match the pattern only at word boundary (either begin at the + beginning of a line, or preceded by a non-word character; end at + the end of a line or followed by a non-word character). + +-v | --invert-match:: + Select non-matching lines. + +-h | -H:: + By default, the command shows the filename for each + match. `-h` option is used to suppress this output. + `-H` is there for completeness and does not do anything + except it overrides `-h` given earlier on the command + line. + +--full-name:: + When run from a subdirectory, the command usually + outputs paths relative to the current directory. This + option forces paths to be output relative to the project + top directory. + +-E | --extended-regexp | -G | --basic-regexp:: + Use POSIX extended/basic regexp for patterns. Default + is to use basic regexp. + +-F | --fixed-strings:: + Use fixed strings for patterns (don't interpret pattern + as a regex). + +-n:: + Prefix the line number to matching lines. + +-l | --files-with-matches | -L | --files-without-match:: + Instead of showing every matched line, show only the + names of files that contain (or do not contain) matches. + +-c | --count:: + Instead of showing every matched line, show the number of + lines that match. + +-[ABC] <context>:: + Show `context` trailing (`A` -- after), or leading (`B` + -- before), or both (`C` -- context) lines, and place a + line containing `--` between contiguous groups of + matches. + +-<num>:: + A shortcut for specifying -C<num>. + +-f <file>:: + Read patterns from <file>, one per line. + +-e:: + The next parameter is the pattern. This option has to be + used for patterns starting with - and should be used in + scripts passing user input to grep. Multiple patterns are + combined by 'or'. + +--and | --or | --not | ( | ):: + Specify how multiple patterns are combined using Boolean + expressions. `--or` is the default operator. `--and` has + higher precedence than `--or`. `-e` has to be used for all + patterns. + +--all-match:: + When giving multiple pattern expressions combined with `--or`, + this flag is specified to limit the match to files that + have lines to match all of them. + +`<tree>...`:: + Search blobs in the trees for specified patterns. + +\--:: + Signals the end of options; the rest of the parameters + are <path> limiters. + + +Example +------- + +git grep -e \'#define\' --and \( -e MAX_PATH -e PATH_MAX \):: + Looks for a line that has `#define` and either `MAX_PATH` or + `PATH_MAX`. + +git grep --all-match -e NODE -e Unexpected:: + Looks for a line that has `NODE` or `Unexpected` in + files that have lines that match both. + +Author +------ +Originally written by Linus Torvalds <torvalds@osdl.org>, later +revamped by Junio C Hamano. + + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt new file mode 100644 index 0000000..6d6cd5d --- /dev/null +++ b/Documentation/git-gui.txt @@ -0,0 +1,115 @@ +git-gui(1) +========== + +NAME +---- +git-gui - A portable graphical interface to Git + +SYNOPSIS +-------- +'git gui' [<command>] [arguments] + +DESCRIPTION +----------- +A Tcl/Tk based graphical user interface to Git. git-gui focuses +on allowing users to make changes to their repository by making +new commits, amending existing ones, creating branches, performing +local merges, and fetching/pushing to remote repositories. + +Unlike linkgit:gitk[1], git-gui focuses on commit generation +and single file annotation, and does not show project history. +It does however supply menu actions to start a gitk session from +within git-gui. + +git-gui is known to work on all popular UNIX systems, Mac OS X, +and Windows (under both Cygwin and MSYS). To the extent possible +OS specific user interface guidelines are followed, making git-gui +a fairly native interface for users. + +COMMANDS +-------- +blame:: + Start a blame viewer on the specified file on the given + version (or working directory if not specified). + +browser:: + Start a tree browser showing all files in the specified + commit (or 'HEAD' by default). Files selected through the + browser are opened in the blame viewer. + +citool:: + Start git-gui and arrange to make exactly one commit before + exiting and returning to the shell. The interface is limited + to only commit actions, slightly reducing the application's + startup time and simplifying the menubar. + +version:: + Display the currently running version of git-gui. + + +Examples +-------- +git gui blame Makefile:: + + Show the contents of the file 'Makefile' in the current + working directory, and provide annotations for both the + original author of each line, and who moved the line to its + current location. The uncommitted file is annotated, and + uncommitted changes (if any) are explicitly attributed to + 'Not Yet Committed'. + +git gui blame v0.99.8 Makefile:: + + Show the contents of 'Makefile' in revision 'v0.99.8' + and provide annotations for each line. Unlike the above + example the file is read from the object database and not + the working directory. + +git gui citool:: + + Make one commit and return to the shell when it is complete. + +git citool:: + + Same as 'git gui citool' (above). + +git gui browser maint:: + + Show a browser for the tree of the 'maint' branch. Files + selected in the browser can be viewed with the internal + blame viewer. + +See Also +-------- +'gitk(1)':: + The git repository browser. Shows branches, commit history + and file differences. gitk is the utility started by + git-gui's Repository Visualize actions. + +Other +----- +git-gui is actually maintained as an independent project, but stable +versions are distributed as part of the Git suite for the convenience +of end users. + +A git-gui development repository can be obtained from: + + git clone git://repo.or.cz/git-gui.git + +or + + git clone http://repo.or.cz/r/git-gui.git + +or browsed online at http://repo.or.cz/w/git-gui.git/[]. + +Author +------ +Written by Shawn O. Pearce <spearce@spearce.org>. + +Documentation +-------------- +Documentation by Shawn O. Pearce <spearce@spearce.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt new file mode 100644 index 0000000..33030c0 --- /dev/null +++ b/Documentation/git-hash-object.txt @@ -0,0 +1,45 @@ +git-hash-object(1) +================== + +NAME +---- +git-hash-object - Compute object ID and optionally creates a blob from a file + + +SYNOPSIS +-------- +'git-hash-object' [-t <type>] [-w] [--stdin] [--] <file>... + +DESCRIPTION +----------- +Computes the object ID value for an object with specified type +with the contents of the named file (which can be outside of the +work tree), and optionally writes the resulting object into the +object database. Reports its object ID to its standard output. +This is used by "git-cvsimport" to update the index +without modifying files in the work tree. When <type> is not +specified, it defaults to "blob". + +OPTIONS +------- + +-t <type>:: + Specify the type (default: "blob"). + +-w:: + Actually write the object into the object database. + +--stdin:: + Read the object from standard input instead of from a file. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt new file mode 100644 index 0000000..fb77ca3 --- /dev/null +++ b/Documentation/git-help.txt @@ -0,0 +1,113 @@ +git-help(1) +=========== + +NAME +---- +git-help - display help information about git + +SYNOPSIS +-------- +'git help' [-a|--all|-i|--info|-m|--man|-w|--web] [COMMAND] + +DESCRIPTION +----------- + +With no options and no COMMAND given, the synopsis of the 'git' +command and a list of the most commonly used git commands are printed +on the standard output. + +If the option '--all' or '-a' is given, then all available commands are +printed on the standard output. + +If a git command is named, a manual page for that command is brought +up. The 'man' program is used by default for this purpose, but this +can be overridden by other options or configuration variables. + +Note that 'git --help ...' is identical as 'git help ...' because the +former is internally converted into the latter. + +OPTIONS +------- +-a|--all:: + Prints all the available commands on the standard output. This + option supersedes any other option. + +-i|--info:: + Use the 'info' program to display the manual page, instead of + the 'man' program that is used by default. + +-m|--man:: + Use the 'man' program to display the manual page. This may be + used to override a value set in the 'help.format' + configuration variable. + +-w|--web:: + Use a web browser to display the HTML manual page, instead of + the 'man' program that is used by default. ++ +The web browser can be specified using the configuration variable +'help.browser', or 'web.browser' if the former is not set. If none of +these config variables is set, the 'git-help--browse' helper script +(called by 'git-help') will pick a suitable default. ++ +You can explicitly provide a full path to your preferred browser by +setting the configuration variable 'browser.<tool>.path'. For example, +you can configure the absolute path to firefox by setting +'browser.firefox.path'. Otherwise, 'git-help--browse' assumes the tool +is available in PATH. ++ +Note that the script tries, as much as possible, to display the HTML +page in a new tab on an already opened browser. ++ +The following browsers are currently supported by 'git-help--browse': ++ +* firefox (this is the default under X Window when not using KDE) +* iceweasel +* konqueror (this is the default under KDE) +* w3m (this is the default outside X Window) +* links +* lynx +* dillo + +CONFIGURATION VARIABLES +----------------------- + +If no command line option is passed, the 'help.format' configuration +variable will be checked. The following values are supported for this +variable; they make 'git-help' behave as their corresponding command +line option: + +* "man" corresponds to '-m|--man', +* "info" corresponds to '-i|--info', +* "web" or "html" correspond to '-w|--web', + +The 'help.browser', 'web.browser' and 'browser.<tool>.path' will also +be checked if the 'web' format is chosen (either by command line +option or configuration variable). See '-w|--web' in the OPTIONS +section above. + +Note that these configuration variables should probably be set using +the '--global' flag, for example like this: + +------------------------------------------------ +$ git config --global help.format web +$ git config --global web.browser firefox +------------------------------------------------ + +as they are probably more user specific than repository specific. +See linkgit:git-config[1] for more information about this. + +Author +------ +Written by Junio C Hamano <gitster@pobox.com> and the git-list +<git@vger.kernel.org>. + +Documentation +------------- +Initial documentation was part of the linkgit:git[7] man page. +Christian Couder <chriscool@tuxfamily.org> extracted and rewrote it a +little. Maintenance is done by the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt new file mode 100644 index 0000000..b784a9d --- /dev/null +++ b/Documentation/git-http-fetch.txt @@ -0,0 +1,56 @@ +git-http-fetch(1) +================= + +NAME +---- +git-http-fetch - Download from a remote git repository via HTTP + + +SYNOPSIS +-------- +'git-http-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] [--stdin] <commit> <url> + +DESCRIPTION +----------- +Downloads a remote git repository via HTTP. + +OPTIONS +------- +commit-id:: + Either the hash or the filename under [URL]/refs/ to + pull. + +-c:: + Get the commit objects. +-t:: + Get trees associated with the commit objects. +-a:: + Get all the objects. +-v:: + Report what is downloaded. + +-w <filename>:: + Writes the commit-id into the filename under $GIT_DIR/refs/<filename> on + the local end after the transfer is complete. + +--stdin:: + Instead of a commit id on the command line (which is not expected in this + case), 'git-http-fetch' expects lines on stdin in the format + + <commit-id>['\t'<filename-as-in--w>] + +--recover:: + Verify that everything reachable from target is fetched. Used after + an earlier fetch is interrupted. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt new file mode 100644 index 0000000..0b82722 --- /dev/null +++ b/Documentation/git-http-push.txt @@ -0,0 +1,104 @@ +git-http-push(1) +================ + +NAME +---- +git-http-push - Push objects over HTTP/DAV to another repository + + +SYNOPSIS +-------- +'git-http-push' [--all] [--dry-run] [--force] [--verbose] <url> <ref> [<ref>...] + +DESCRIPTION +----------- +Sends missing objects to remote repository, and updates the +remote branch. + +*NOTE*: This command is temporarily disabled if your cURL +library is older than 7.16, as the combination has been reported +not to work and sometimes corrupts repository. + +OPTIONS +------- +--all:: + Do not assume that the remote repository is complete in its + current state, and verify all objects in the entire local + ref's history exist in the remote repository. + +--force:: + Usually, the command refuses to update a remote ref that + is not an ancestor of the local ref used to overwrite it. + This flag disables the check. What this means is that + the remote repository can lose commits; use it with + care. + +--dry-run:: + Do everything except actually send the updates. + +--verbose:: + Report the list of objects being walked locally and the + list of objects successfully sent to the remote repository. + +-d, -D:: + Remove <ref> from remote repository. The specified branch + cannot be the remote HEAD. If -d is specified the following + other conditions must also be met: + + - Remote HEAD must resolve to an object that exists locally + - Specified branch resolves to an object that exists locally + - Specified branch is an ancestor of the remote HEAD + +<ref>...:: + The remote refs to update. + + +Specifying the Refs +------------------- + +A '<ref>' specification can be either a single pattern, or a pair +of such patterns separated by a colon ":" (this means that a ref name +cannot have a colon in it). A single pattern '<name>' is just a +shorthand for '<name>:<name>'. + +Each pattern pair consists of the source side (before the colon) +and the destination side (after the colon). The ref to be +pushed is determined by finding a match that matches the source +side, and where it is pushed is determined by using the +destination side. + + - It is an error if <src> does not match exactly one of the + local refs. + + - If <dst> does not match any remote ref, either + + * it has to start with "refs/"; <dst> is used as the + destination literally in this case. + + * <src> == <dst> and the ref that matched the <src> must not + exist in the set of remote refs; the ref matched <src> + locally is used as the name of the destination. + +Without '--force', the <src> ref is stored at the remote only if +<dst> does not exist, or <dst> is a proper subset (i.e. an +ancestor) of <src>. This check, known as "fast forward check", +is performed in order to avoid accidentally overwriting the +remote ref and lose other peoples' commits from there. + +With '--force', the fast forward check is disabled for all refs. + +Optionally, a <ref> parameter can be prefixed with a plus '+' sign +to disable the fast-forward check only on that ref. + + +Author +------ +Written by Nick Hengeveld <nickh@reactrix.com> + +Documentation +-------------- +Documentation by Nick Hengeveld + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-imap-send.txt b/Documentation/git-imap-send.txt new file mode 100644 index 0000000..522b73c --- /dev/null +++ b/Documentation/git-imap-send.txt @@ -0,0 +1,62 @@ +git-imap-send(1) +================ + +NAME +---- +git-imap-send - Dump a mailbox from stdin into an imap folder + + +SYNOPSIS +-------- +'git-imap-send' + + +DESCRIPTION +----------- +This command uploads a mailbox generated with git-format-patch +into an imap drafts folder. This allows patches to be sent as +other email is sent with mail clients that cannot read mailbox +files directly. + +Typical usage is something like: + +git-format-patch --signoff --stdout --attach origin | git-imap-send + + +CONFIGURATION +------------- + +git-imap-send requires the following values in the repository +configuration file (shown with examples): + +.......................... +[imap] + Folder = "INBOX.Drafts" + +[imap] + Tunnel = "ssh -q user@server.com /usr/bin/imapd ./Maildir 2> /dev/null" + +[imap] + Host = imap.server.com + User = bob + Pass = pwd + Port = 143 +.......................... + + +BUGS +---- +Doesn't handle lines starting with "From " in the message body. + + +Author +------ +Derived from isync 1.0.1 by Mike McCormack. + +Documentation +-------------- +Documentation by Mike McCormack + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt new file mode 100644 index 0000000..72b5d00 --- /dev/null +++ b/Documentation/git-index-pack.txt @@ -0,0 +1,100 @@ +git-index-pack(1) +================= + +NAME +---- +git-index-pack - Build pack index file for an existing packed archive + + +SYNOPSIS +-------- +[verse] +'git-index-pack' [-v] [-o <index-file>] <pack-file> +'git-index-pack' --stdin [--fix-thin] [--keep] [-v] [-o <index-file>] + [<pack-file>] + + +DESCRIPTION +----------- +Reads a packed archive (.pack) from the specified file, and +builds a pack index file (.idx) for it. The packed archive +together with the pack index can then be placed in the +objects/pack/ directory of a git repository. + + +OPTIONS +------- +-v:: + Be verbose about what is going on, including progress status. + +-o <index-file>:: + Write the generated pack index into the specified + file. Without this option the name of pack index + file is constructed from the name of packed archive + file by replacing .pack with .idx (and the program + fails if the name of packed archive does not end + with .pack). + +--stdin:: + When this flag is provided, the pack is read from stdin + instead and a copy is then written to <pack-file>. If + <pack-file> is not specified, the pack is written to + objects/pack/ directory of the current git repository with + a default name determined from the pack content. If + <pack-file> is not specified consider using --keep to + prevent a race condition between this process and + linkgit:git-repack[1]. + +--fix-thin:: + It is possible for linkgit:git-pack-objects[1] to build + "thin" pack, which records objects in deltified form based on + objects not included in the pack to reduce network traffic. + Those objects are expected to be present on the receiving end + and they must be included in the pack for that pack to be self + contained and indexable. Without this option any attempt to + index a thin pack will fail. This option only makes sense in + conjunction with --stdin. + +--keep:: + Before moving the index into its final destination + create an empty .keep file for the associated pack file. + This option is usually necessary with --stdin to prevent a + simultaneous linkgit:git-repack[1] process from deleting + the newly constructed pack and index before refs can be + updated to use objects contained in the pack. + +--keep='why':: + Like --keep create a .keep file before moving the index into + its final destination, but rather than creating an empty file + place 'why' followed by an LF into the .keep file. The 'why' + message can later be searched for within all .keep files to + locate any which have outlived their usefulness. + +--index-version=<version>[,<offset>]:: + This is intended to be used by the test suite only. It allows + to force the version for the generated pack index, and to force + 64-bit index entries on objects located above the given offset. + + +Note +---- + +Once the index has been created, the list of object names is sorted +and the SHA1 hash of that list is printed to stdout. If --stdin was +also used then this is prefixed by either "pack\t", or "keep\t" if a +new .keep file was successfully created. This is useful to remove a +.keep file used as a lock to prevent the race with linkgit:git-repack[1] +mentioned above. + + +Author +------ +Written by Sergey Vlasov <vsu@altlinux.ru> + +Documentation +------------- +Documentation by Sergey Vlasov + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt new file mode 100644 index 0000000..439cabb --- /dev/null +++ b/Documentation/git-init-db.txt @@ -0,0 +1,18 @@ +git-init-db(1) +============== + +NAME +---- +git-init-db - Creates an empty git repository + + +SYNOPSIS +-------- +'git-init-db' [-q | --quiet] [--template=<template_directory>] [--shared[=<permissions>]] + + +DESCRIPTION +----------- + +This is a synonym for linkgit:git-init[1]. Please refer to the +documentation of that command. diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt new file mode 100644 index 0000000..62914da --- /dev/null +++ b/Documentation/git-init.txt @@ -0,0 +1,114 @@ +git-init(1) +=========== + +NAME +---- +git-init - Create an empty git repository or reinitialize an existing one + + +SYNOPSIS +-------- +'git-init' [-q | --quiet] [--template=<template_directory>] [--shared[=<permissions>]] + + +OPTIONS +------- + +-- + +-q, \--quiet:: + +Only print error and warning messages, all other output will be suppressed. + +--template=<template_directory>:: + +Provide the directory from which templates will be used. The default template +directory is `/usr/share/git-core/templates`. + +When specified, `<template_directory>` is used as the source of the template +files rather than the default. The template files include some directory +structure, some suggested "exclude patterns", and copies of non-executing +"hook" files. The suggested patterns and hook files are all modifiable and +extensible. + +--shared[={false|true|umask|group|all|world|everybody}]:: + +Specify that the git repository is to be shared amongst several users. This +allows users belonging to the same group to push into that +repository. When specified, the config variable "core.sharedRepository" is +set so that files and directories under `$GIT_DIR` are created with the +requested permissions. When not specified, git will use permissions reported +by umask(2). + +The option can have the following values, defaulting to 'group' if no value +is given: + + - 'umask' (or 'false'): Use permissions reported by umask(2). The default, + when `--shared` is not specified. + + - 'group' (or 'true'): Make the repository group-writable, (and g+sx, since + the git group may be not the primary group of all users). + + - 'all' (or 'world' or 'everybody'): Same as 'group', but make the repository + readable by all users. + +By default, the configuration flag receive.denyNonFastForwards is enabled +in shared repositories, so that you cannot force a non fast-forwarding push +into it. + +-- + + +DESCRIPTION +----------- +This command creates an empty git repository - basically a `.git` directory +with subdirectories for `objects`, `refs/heads`, `refs/tags`, and +template files. +An initial `HEAD` file that references the HEAD of the master branch +is also created. + +If the `$GIT_DIR` environment variable is set then it specifies a path +to use instead of `./.git` for the base of the repository. + +If the object storage directory is specified via the `$GIT_OBJECT_DIRECTORY` +environment variable then the sha1 directories are created underneath - +otherwise the default `$GIT_DIR/objects` directory is used. + +Running `git-init` in an existing repository is safe. It will not overwrite +things that are already there. The primary reason for rerunning `git-init` +is to pick up newly added templates. + +Note that `git-init` is the same as `git-init-db`. The command +was primarily meant to initialize the object database, but over +time it has become responsible for setting up the other aspects +of the repository, such as installing the default hooks and +setting the configuration variables. The old name is retained +for backward compatibility reasons. + + +EXAMPLES +-------- + +Start a new git repository for an existing code base:: ++ +---------------- +$ cd /path/to/my/codebase +$ git-init <1> +$ git-add . <2> +---------------- ++ +<1> prepare /path/to/my/codebase/.git directory +<2> add all existing file to the index + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt new file mode 100644 index 0000000..841e8fa --- /dev/null +++ b/Documentation/git-instaweb.txt @@ -0,0 +1,87 @@ +git-instaweb(1) +=============== + +NAME +---- +git-instaweb - Instantly browse your working repository in gitweb + +SYNOPSIS +-------- +[verse] +'git-instaweb' [--local] [--httpd=<httpd>] [--port=<port>] + [--browser=<browser>] +'git-instaweb' [--start] [--stop] [--restart] + +DESCRIPTION +----------- +A simple script to setup gitweb and a web server for browsing the local +repository. + +OPTIONS +------- + +-l|--local:: + Only bind the web server to the local IP (127.0.0.1). + +-d|--httpd:: + The HTTP daemon command-line that will be executed. + Command-line options may be specified here, and the + configuration file will be added at the end of the command-line. + Currently lighttpd, apache2 and webrick are supported. + (Default: lighttpd) + +-m|--module-path:: + The module path (only needed if httpd is Apache). + (Default: /usr/lib/apache2/modules) + +-p|--port:: + The port number to bind the httpd to. (Default: 1234) + +-b|--browser:: + + The web browser command-line to execute to view the gitweb page. + If blank, the URL of the gitweb instance will be printed to + stdout. (Default: 'firefox') + +--start:: + Start the httpd instance and exit. This does not generate + any of the configuration files for spawning a new instance. + +--stop:: + Stop the httpd instance and exit. This does not generate + any of the configuration files for spawning a new instance, + nor does it close the browser. + +--restart:: + Restart the httpd instance and exit. This does not generate + any of the configuration files for spawning a new instance. + +CONFIGURATION +------------- + +You may specify configuration in your .git/config + +----------------------------------------------------------------------- +[instaweb] + local = true + httpd = apache2 -f + port = 4321 + browser = konqueror + modulepath = /usr/lib/apache2/modules + +----------------------------------------------------------------------- + +If the configuration variable 'instaweb.browser' is not set, +'web.browser' will be used instead if it is defined. + +Author +------ +Written by Eric Wong <normalperson@yhbt.net> + +Documentation +-------------- +Documentation by Eric Wong <normalperson@yhbt.net>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt new file mode 100644 index 0000000..ebaee4b --- /dev/null +++ b/Documentation/git-log.txt @@ -0,0 +1,115 @@ +git-log(1) +========== + +NAME +---- +git-log - Show commit logs + + +SYNOPSIS +-------- +'git-log' <option>... + +DESCRIPTION +----------- +Shows the commit logs. + +The command takes options applicable to the linkgit:git-rev-list[1] +command to control what is shown and how, and options applicable to +the linkgit:git-diff-tree[1] commands to control how the changes +each commit introduces are shown. + + +OPTIONS +------- + +:git-log: 1 +include::diff-options.txt[] + +-<n>:: + Limits the number of commits to show. + +<since>..<until>:: + Show only commits between the named two commits. When + either <since> or <until> is omitted, it defaults to + `HEAD`, i.e. the tip of the current branch. + For a more complete list of ways to spell <since> + and <until>, see "SPECIFYING REVISIONS" section in + linkgit:git-rev-parse[1]. + +--decorate:: + Print out the ref names of any commits that are shown. + +--full-diff:: + Without this flag, "git log -p <paths>..." shows commits that + touch the specified paths, and diffs about the same specified + paths. With this, the full diff is shown for commits that touch + the specified paths; this means that "<paths>..." limits only + commits, and doesn't limit diff for those commits. + +--follow:: + Continue listing the history of a file beyond renames. + +--log-size:: + Before the log message print out its size in bytes. Intended + mainly for porcelain tools consumption. If git is unable to + produce a valid value size is set to zero. + Note that only message is considered, if also a diff is shown + its size is not included. + +<paths>...:: + Show only commits that affect the specified paths. + + +include::rev-list-options.txt[] + +include::pretty-formats.txt[] + +include::diff-generate-patch.txt[] + +Examples +-------- +git log --no-merges:: + + Show the whole commit history, but skip any merges + +git log v2.6.12.. include/scsi drivers/scsi:: + + Show all commits since version 'v2.6.12' that changed any file + in the include/scsi or drivers/scsi subdirectories + +git log --since="2 weeks ago" \-- gitk:: + + Show the changes during the last two weeks to the file 'gitk'. + The "--" is necessary to avoid confusion with the *branch* named + 'gitk' + +git log --name-status release..test:: + + Show the commits that are in the "test" branch but not yet + in the "release" branch, along with the list of paths + each commit modifies. + +git log --follow builtin-rev-list.c:: + + Shows the commits that changed builtin-rev-list.c, including + those commits that occurred before the file was given its + present name. + +Discussion +---------- + +include::i18n.txt[] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-lost-found.txt b/Documentation/git-lost-found.txt new file mode 100644 index 0000000..b1c797f --- /dev/null +++ b/Documentation/git-lost-found.txt @@ -0,0 +1,81 @@ +git-lost-found(1) +================= + +NAME +---- +git-lost-found - Recover lost refs that luckily have not yet been pruned + +SYNOPSIS +-------- +'git-lost-found' + +DESCRIPTION +----------- + +*NOTE*: this command is deprecated. Use linkgit:git-fsck[1] with +the option '--lost-found' instead. + +Finds dangling commits and tags from the object database, and +creates refs to them in the .git/lost-found/ directory. Commits and +tags that dereference to commits are stored in .git/lost-found/commit, +and other objects are stored in .git/lost-found/other. + + +OUTPUT +------ +Prints to standard output the object names and one-line descriptions +of any commits or tags found. + +EXAMPLE +------- + +Suppose you run 'git tag -f' and mistype the tag to overwrite. +The ref to your tag is overwritten, but until you run 'git +prune', the tag itself is still there. + +------------ +$ git lost-found +[1ef2b196d909eed523d4f3c9bf54b78cdd6843c6] GIT 0.99.9c +... +------------ + +Also you can use gitk to browse how any tags found relate to each +other. + +------------ +$ gitk $(cd .git/lost-found/commit && echo ??*) +------------ + +After making sure you know which the object is the tag you are looking +for, you can reconnect it to your regular .git/refs hierarchy. + +------------ +$ git cat-file -t 1ef2b196 +tag +$ git cat-file tag 1ef2b196 +object fa41bbce8e38c67a218415de6cfa510c7e50032a +type commit +tag v0.99.9c +tagger Junio C Hamano <junkio@cox.net> 1131059594 -0800 + +GIT 0.99.9c + +This contains the following changes from the "master" branch, since +... +$ git update-ref refs/tags/not-lost-anymore 1ef2b196 +$ git rev-parse not-lost-anymore +1ef2b196d909eed523d4f3c9bf54b78cdd6843c6 +------------ + +Author +------ +Written by Junio C Hamano <gitster@pobox.com> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt new file mode 100644 index 0000000..da9ebf4 --- /dev/null +++ b/Documentation/git-ls-files.txt @@ -0,0 +1,195 @@ +git-ls-files(1) +=============== + +NAME +---- +git-ls-files - Show information about files in the index and the working tree + + +SYNOPSIS +-------- +[verse] +'git-ls-files' [-z] [-t] [-v] + (--[cached|deleted|others|ignored|stage|unmerged|killed|modified])\* + (-[c|d|o|i|s|u|k|m])\* + [-x <pattern>|--exclude=<pattern>] + [-X <file>|--exclude-from=<file>] + [--exclude-per-directory=<file>] + [--exclude-standard] + [--error-unmatch] [--with-tree=<tree-ish>] + [--full-name] [--abbrev] [--] [<file>]\* + +DESCRIPTION +----------- +This merges the file listing in the directory cache index with the +actual working directory list, and shows different combinations of the +two. + +One or more of the options below may be used to determine the files +shown: + +OPTIONS +------- +-c|--cached:: + Show cached files in the output (default) + +-d|--deleted:: + Show deleted files in the output + +-m|--modified:: + Show modified files in the output + +-o|--others:: + Show other files in the output + +-i|--ignored:: + Show ignored files in the output. + Note that this also reverses any exclude list present. + +-s|--stage:: + Show stage files in the output + +--directory:: + If a whole directory is classified as "other", show just its + name (with a trailing slash) and not its whole contents. + +--no-empty-directory:: + Do not list empty directories. Has no effect without --directory. + +-u|--unmerged:: + Show unmerged files in the output (forces --stage) + +-k|--killed:: + Show files on the filesystem that need to be removed due + to file/directory conflicts for checkout-index to + succeed. + +-z:: + \0 line termination on output. + +-x|--exclude=<pattern>:: + Skips files matching pattern. + Note that pattern is a shell wildcard pattern. + +-X|--exclude-from=<file>:: + exclude patterns are read from <file>; 1 per line. + +--exclude-per-directory=<file>:: + read additional exclude patterns that apply only to the + directory and its subdirectories in <file>. + +--exclude-standard:: + Add the standard git exclusions: .git/info/exclude, .gitignore + in each directory, and the user's global exclusion file. + +--error-unmatch:: + If any <file> does not appear in the index, treat this as an + error (return 1). + +--with-tree=<tree-ish>:: + When using --error-unmatch to expand the user supplied + <file> (i.e. path pattern) arguments to paths, pretend + that paths which were removed in the index since the + named <tree-ish> are still present. Using this option + with `-s` or `-u` options does not make any sense. + +-t:: + Identify the file status with the following tags (followed by + a space) at the start of each line: + H:: cached + M:: unmerged + R:: removed/deleted + C:: modified/changed + K:: to be killed + ?:: other + +-v:: + Similar to `-t`, but use lowercase letters for files + that are marked as 'assume unchanged' (see + linkgit:git-update-index[1]). + +--full-name:: + When run from a subdirectory, the command usually + outputs paths relative to the current directory. This + option forces paths to be output relative to the project + top directory. + +--abbrev[=<n>]:: + Instead of showing the full 40-byte hexadecimal object + lines, show only handful hexdigits prefix. + Non default number of digits can be specified with --abbrev=<n>. + +\--:: + Do not interpret any more arguments as options. + +<file>:: + Files to show. If no files are given all files which match the other + specified criteria are shown. + +Output +------ +show files just outputs the filename unless '--stage' is specified in +which case it outputs: + + [<tag> ]<mode> <object> <stage> <file> + +"git-ls-files --unmerged" and "git-ls-files --stage" can be used to examine +detailed information on unmerged paths. + +For an unmerged path, instead of recording a single mode/SHA1 pair, +the index records up to three such pairs; one from tree O in stage +1, A in stage 2, and B in stage 3. This information can be used by +the user (or the porcelain) to see what should eventually be recorded at the +path. (see git-read-tree for more information on state) + +When `-z` option is not used, TAB, LF, and backslash characters +in pathnames are represented as `\t`, `\n`, and `\\`, +respectively. + + +Exclude Patterns +---------------- + +'git-ls-files' can use a list of "exclude patterns" when +traversing the directory tree and finding files to show when the +flags --others or --ignored are specified. linkgit:gitignore[5] +specifies the format of exclude patterns. + +These exclude patterns come from these places, in order: + + 1. The command line flag --exclude=<pattern> specifies a + single pattern. Patterns are ordered in the same order + they appear in the command line. + + 2. The command line flag --exclude-from=<file> specifies a + file containing a list of patterns. Patterns are ordered + in the same order they appear in the file. + + 3. command line flag --exclude-per-directory=<name> specifies + a name of the file in each directory 'git-ls-files' + examines, normally `.gitignore`. Files in deeper + directories take precedence. Patterns are ordered in the + same order they appear in the files. + +A pattern specified on the command line with --exclude or read +from the file specified with --exclude-from is relative to the +top of the directory tree. A pattern read from a file specified +by --exclude-per-directory is relative to the directory that the +pattern file appears in. + +See Also +-------- +linkgit:git-read-tree[1], linkgit:gitignore[5] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano, Josh Triplett, and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt new file mode 100644 index 0000000..c5ba0aa --- /dev/null +++ b/Documentation/git-ls-remote.txt @@ -0,0 +1,72 @@ +git-ls-remote(1) +================ + +NAME +---- +git-ls-remote - List references in a remote repository + + +SYNOPSIS +-------- +[verse] +'git-ls-remote' [--heads] [--tags] [-u <exec> | --upload-pack <exec>] + <repository> <refs>... + +DESCRIPTION +----------- +Displays references available in a remote repository along with the associated +commit IDs. + + +OPTIONS +------- +-h|--heads, -t|--tags:: + Limit to only refs/heads and refs/tags, respectively. + These options are _not_ mutually exclusive; when given + both, references stored in refs/heads and refs/tags are + displayed. + +-u <exec>, --upload-pack=<exec>:: + Specify the full path of linkgit:git-upload-pack[1] on the remote + host. This allows listing references from repositories accessed via + SSH and where the SSH daemon does not use the PATH configured by the + user. + +<repository>:: + Location of the repository. The shorthand defined in + $GIT_DIR/branches/ can be used. Use "." (dot) to list references in + the local repository. + +<refs>...:: + When unspecified, all references, after filtering done + with --heads and --tags, are shown. When <refs>... are + specified, only references matching the given patterns + are displayed. + +EXAMPLES +-------- + + $ git ls-remote --tags ./. + d6602ec5194c87b0fc87103ca4d67251c76f233a refs/tags/v0.99 + f25a265a342aed6041ab0cc484224d9ca54b6f41 refs/tags/v0.99.1 + 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 + c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 + 0918385dbd9656cab0d1d81ba7453d49bbc16250 refs/tags/junio-gpg-pub + $ git ls-remote http://www.kernel.org/pub/scm/git/git.git master pu rc + 5fe978a5381f1fbad26a80e682ddd2a401966740 refs/heads/master + c781a84b5204fb294c9ccc79f8b3baceeb32c061 refs/heads/pu + b1d096f2926c4e37c9c0b6a7bf2119bedaa277cb refs/heads/rc + $ echo http://www.kernel.org/pub/scm/git/git.git >.git/branches/public + $ git ls-remote --tags public v\* + d6602ec5194c87b0fc87103ca4d67251c76f233a refs/tags/v0.99 + f25a265a342aed6041ab0cc484224d9ca54b6f41 refs/tags/v0.99.1 + c5db5456ae3b0873fc659c19fafdde22313cc441 refs/tags/v0.99.2 + 7ceca275d047c90c0c7d5afb13ab97efdf51bd6e refs/tags/v0.99.3 + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt new file mode 100644 index 0000000..360c0a1 --- /dev/null +++ b/Documentation/git-ls-tree.txt @@ -0,0 +1,94 @@ +git-ls-tree(1) +============== + +NAME +---- +git-ls-tree - List the contents of a tree object + + +SYNOPSIS +-------- +[verse] +'git-ls-tree' [-d] [-r] [-t] [-l] [-z] + [--name-only] [--name-status] [--full-name] [--abbrev=[<n>]] + <tree-ish> [paths...] + +DESCRIPTION +----------- +Lists the contents of a given tree object, like what "/bin/ls -a" does +in the current working directory. Note that the usage is subtly different, +though - 'paths' denote just a list of patterns to match, e.g. so specifying +directory name (without '-r') will behave differently, and order of the +arguments does not matter. + +OPTIONS +------- +<tree-ish>:: + Id of a tree-ish. + +-d:: + Show only the named tree entry itself, not its children. + +-r:: + Recurse into sub-trees. + +-t:: + Show tree entries even when going to recurse them. Has no effect + if '-r' was not passed. '-d' implies '-t'. + +-l:: +--long:: + Show object size of blob (file) entries. + +-z:: + \0 line termination on output. + +--name-only:: +--name-status:: + List only filenames (instead of the "long" output), one per line. + +--abbrev[=<n>]:: + Instead of showing the full 40-byte hexadecimal object + lines, show only handful hexdigits prefix. + Non default number of digits can be specified with --abbrev=<n>. + +--full-name:: + Instead of showing the path names relative to the current working + directory, show the full path names. + +paths:: + When paths are given, show them (note that this isn't really raw + pathnames, but rather a list of patterns to match). Otherwise + implicitly uses the root level of the tree as the sole path argument. + + +Output Format +------------- + <mode> SP <type> SP <object> TAB <file> + +When the `-z` option is not used, TAB, LF, and backslash characters +in pathnames are represented as `\t`, `\n`, and `\\`, respectively. + +When the `-l` option is used, format changes to + + <mode> SP <type> SP <object> SP <object size> TAB <file> + +Object size identified by <object> is given in bytes, and right-justified +with minimum width of 7 characters. Object size is given only for blobs +(file) entries; for other entries `-` character is used in place of size. + + +Author +------ +Written by Petr Baudis <pasky@suse.cz> +Completely rewritten from scratch by Junio C Hamano <junkio@cox.net>, +another major rewrite by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list +<git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt new file mode 100644 index 0000000..3846f0e --- /dev/null +++ b/Documentation/git-mailinfo.txt @@ -0,0 +1,69 @@ +git-mailinfo(1) +=============== + +NAME +---- +git-mailinfo - Extracts patch and authorship from a single e-mail message + + +SYNOPSIS +-------- +'git-mailinfo' [-k] [-u | --encoding=<encoding>] <msg> <patch> + + +DESCRIPTION +----------- +Reading a single e-mail message from the standard input, and +writes the commit log message in <msg> file, and the patches in +<patch> file. The author name, e-mail and e-mail subject are +written out to the standard output to be used by git-am +to create a commit. It is usually not necessary to use this +command directly. See linkgit:git-am[1] instead. + + +OPTIONS +------- +-k:: + Usually the program 'cleans up' the Subject: header line + to extract the title line for the commit log message, + among which (1) remove 'Re:' or 're:', (2) leading + whitespaces, (3) '[' up to ']', typically '[PATCH]', and + then prepends "[PATCH] ". This flag forbids this + munging, and is most useful when used to read back 'git + format-patch -k' output. + +-u:: + The commit log message, author name and author email are + taken from the e-mail, and after minimally decoding MIME + transfer encoding, re-coded in UTF-8 by transliterating + them. This used to be optional but now it is the default. ++ +Note that the patch is always used as-is without charset +conversion, even with this flag. + +--encoding=<encoding>:: + Similar to -u but if the local convention is different + from what is specified by i18n.commitencoding, this flag + can be used to override it. + +<msg>:: + The commit log message extracted from e-mail, usually + except the title line which comes from e-mail Subject. + +<patch>:: + The patch extracted from e-mail. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net> + + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt new file mode 100644 index 0000000..8243f69 --- /dev/null +++ b/Documentation/git-mailsplit.txt @@ -0,0 +1,58 @@ +git-mailsplit(1) +================ + +NAME +---- +git-mailsplit - Simple UNIX mbox splitter program + +SYNOPSIS +-------- +'git-mailsplit' [-b] [-f<nn>] [-d<prec>] -o<directory> [--] [<mbox>|<Maildir>...] + +DESCRIPTION +----------- +Splits a mbox file or a Maildir into a list of files: "0001" "0002" .. in the +specified directory so you can process them further from there. + +IMPORTANT: Maildir splitting relies upon filenames being sorted to output +patches in the correct order. + +OPTIONS +------- +<mbox>:: + Mbox file to split. If not given, the mbox is read from + the standard input. + +<Maildir>:: + Root of the Maildir to split. This directory should contain the cur, tmp + and new subdirectories. + +<directory>:: + Directory in which to place the individual messages. + +-b:: + If any file doesn't begin with a From line, assume it is a + single mail message instead of signaling error. + +-d<prec>:: + Instead of the default 4 digits with leading zeros, + different precision can be specified for the generated + filenames. + +-f<nn>:: + Skip the first <nn> numbers, for example if -f3 is specified, + start the numbering with 0004. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> +and Junio C Hamano <junkio@cox.net> + + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt new file mode 100644 index 0000000..07f78b4 --- /dev/null +++ b/Documentation/git-merge-base.txt @@ -0,0 +1,42 @@ +git-merge-base(1) +================= + +NAME +---- +git-merge-base - Find as good common ancestors as possible for a merge + + +SYNOPSIS +-------- +'git-merge-base' [--all] <commit> <commit> + +DESCRIPTION +----------- + +"git-merge-base" finds as good a common ancestor as possible between +the two commits. That is, given two commits A and B 'git-merge-base A +B' will output a commit which is reachable from both A and B through +the parent relationship. + +Given a selection of equally good common ancestors it should not be +relied on to decide in any particular way. + +The "git-merge-base" algorithm is still in flux - use the source... + +OPTIONS +------- +--all:: + Output all common ancestors for the two commits instead of + just one. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge-file.txt b/Documentation/git-merge-file.txt new file mode 100644 index 0000000..c513184 --- /dev/null +++ b/Documentation/git-merge-file.txt @@ -0,0 +1,92 @@ +git-merge-file(1) +================= + +NAME +---- +git-merge-file - Run a three-way file merge + + +SYNOPSIS +-------- +[verse] +'git-merge-file' [-L <current-name> [-L <base-name> [-L <other-name>]]] + [-p|--stdout] [-q|--quiet] <current-file> <base-file> <other-file> + + +DESCRIPTION +----------- +git-file-merge incorporates all changes that lead from the `<base-file>` +to `<other-file>` into `<current-file>`. The result ordinarily goes into +`<current-file>`. git-merge-file is useful for combining separate changes +to an original. Suppose `<base-file>` is the original, and both +`<current-file>` and `<other-file>` are modifications of `<base-file>`. +Then git-merge-file combines both changes. + +A conflict occurs if both `<current-file>` and `<other-file>` have changes +in a common segment of lines. If a conflict is found, git-merge-file +normally outputs a warning and brackets the conflict with <<<<<<< and +>>>>>>> lines. A typical conflict will look like this: + + <<<<<<< A + lines in file A + ======= + lines in file B + >>>>>>> B + +If there are conflicts, the user should edit the result and delete one of +the alternatives. + +The exit value of this program is negative on error, and the number of +conflicts otherwise. If the merge was clean, the exit value is 0. + +git-merge-file is designed to be a minimal clone of RCS merge, that is, it +implements all of RCS merge's functionality which is needed by +linkgit:git[1]. + + +OPTIONS +------- + +-L <label>:: + This option may be given up to three times, and + specifies labels to be used in place of the + corresponding file names in conflict reports. That is, + `git-merge-file -L x -L y -L z a b c` generates output that + looks like it came from files x, y and z instead of + from files a, b and c. + +-p:: + Send results to standard output instead of overwriting + `<current-file>`. + +-q:: + Quiet; do not warn about conflicts. + + +EXAMPLES +-------- + +git merge-file README.my README README.upstream:: + + combines the changes of README.my and README.upstream since README, + tries to merge them and writes the result into README.my. + +git merge-file -L a -L b -L c tmp/a123 tmp/b234 tmp/c345:: + + merges tmp/a123 and tmp/c345 with the base tmp/b234, but uses labels + `a` and `c` instead of `tmp/a123` and `tmp/c345`. + + +Author +------ +Written by Johannes Schindelin <johannes.schindelin@gmx.de> + + +Documentation +-------------- +Documentation by Johannes Schindelin and the git-list <git@vger.kernel.org>, +with parts copied from the original documentation of RCS merge. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt new file mode 100644 index 0000000..5d816d0 --- /dev/null +++ b/Documentation/git-merge-index.txt @@ -0,0 +1,87 @@ +git-merge-index(1) +================== + +NAME +---- +git-merge-index - Run a merge for files needing merging + + +SYNOPSIS +-------- +'git-merge-index' [-o] [-q] <merge-program> (-a | \-- | <file>\*) + +DESCRIPTION +----------- +This looks up the <file>(s) in the index and, if there are any merge +entries, passes the SHA1 hash for those files as arguments 1, 2, 3 (empty +argument if no file), and <file> as argument 4. File modes for the three +files are passed as arguments 5, 6 and 7. + +OPTIONS +------- +\--:: + Do not interpret any more arguments as options. + +-a:: + Run merge against all files in the index that need merging. + +-o:: + Instead of stopping at the first failed merge, do all of them + in one shot - continue with merging even when previous merges + returned errors, and only return the error code after all the + merges are over. + +-q:: + Do not complain about failed merge program (the merge program + failure usually indicates conflicts during merge). This is for + porcelains which might want to emit custom messages. + +If "git-merge-index" is called with multiple <file>s (or -a) then it +processes them in turn only stopping if merge returns a non-zero exit +code. + +Typically this is run with a script calling git's imitation of +the merge command from the RCS package. + +A sample script called "git-merge-one-file" is included in the +distribution. + +ALERT ALERT ALERT! The git "merge object order" is different from the +RCS "merge" program merge object order. In the above ordering, the +original is first. But the argument order to the 3-way merge program +"merge" is to have the original in the middle. Don't ask me why. + +Examples: + + torvalds@ppc970:~/merge-test> git-merge-index cat MM + This is MM from the original tree. # original + This is modified MM in the branch A. # merge1 + This is modified MM in the branch B. # merge2 + This is modified MM in the branch B. # current contents + +or + + torvalds@ppc970:~/merge-test> git-merge-index cat AA MM + cat: : No such file or directory + This is added AA in the branch A. + This is added AA in the branch B. + This is added AA in the branch B. + fatal: merge program failed + +where the latter example shows how "git-merge-index" will stop trying to +merge once anything has returned an error (i.e., "cat" returned an error +for the AA file, because it didn't exist in the original, and thus +"git-merge-index" didn't even try to merge the MM thing). + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> +One-shot merge by Petr Baudis <pasky@ucw.cz> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge-one-file.txt b/Documentation/git-merge-one-file.txt new file mode 100644 index 0000000..ee95df3 --- /dev/null +++ b/Documentation/git-merge-one-file.txt @@ -0,0 +1,29 @@ +git-merge-one-file(1) +===================== + +NAME +---- +git-merge-one-file - The standard helper program to use with git-merge-index + + +SYNOPSIS +-------- +'git-merge-one-file' + +DESCRIPTION +----------- +This is the standard helper program to use with "git-merge-index" +to resolve a merge after the trivial merge done with "git-read-tree -m". + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org>, +Junio C Hamano <junkio@cox.net> and Petr Baudis <pasky@suse.cz>. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge-tree.txt b/Documentation/git-merge-tree.txt new file mode 100644 index 0000000..4cc0964 --- /dev/null +++ b/Documentation/git-merge-tree.txt @@ -0,0 +1,36 @@ +git-merge-tree(1) +================= + +NAME +---- +git-merge-tree - Show three-way merge without touching index + + +SYNOPSIS +-------- +'git-merge-tree' <base-tree> <branch1> <branch2> + +DESCRIPTION +----------- +Reads three treeish, and output trivial merge results and +conflicting stages to the standard output. This is similar to +what three-way read-tree -m does, but instead of storing the +results in the index, the command outputs the entries to the +standard output. + +This is meant to be used by higher level scripts to compute +merge results outside index, and stuff the results back into the +index. For this reason, the output from the command omits +entries that match <branch1> tree. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt new file mode 100644 index 0000000..c136b10 --- /dev/null +++ b/Documentation/git-merge.txt @@ -0,0 +1,182 @@ +git-merge(1) +============ + +NAME +---- +git-merge - Join two or more development histories together + + +SYNOPSIS +-------- +[verse] +'git-merge' [-n] [--summary] [--no-commit] [--squash] [-s <strategy>]... + [-m <msg>] <remote> <remote>... +'git-merge' <msg> HEAD <remote>... + +DESCRIPTION +----------- +This is the top-level interface to the merge machinery +which drives multiple merge strategy scripts. + +The second syntax (<msg> `HEAD` <remote>) is supported for +historical reasons. Do not use it from the command line or in +new scripts. It is the same as `git merge -m <msg> <remote>`. + + +OPTIONS +------- +include::merge-options.txt[] + +-m <msg>:: + The commit message to be used for the merge commit (in case + it is created). The `git-fmt-merge-msg` script can be used + to give a good default for automated `git-merge` invocations. + +<remote>:: + Other branch head merged into our branch. You need at + least one <remote>. Specifying more than one <remote> + obviously means you are trying an Octopus. + +include::merge-strategies.txt[] + + +If you tried a merge which resulted in a complex conflicts and +would want to start over, you can recover with +linkgit:git-reset[1]. + +CONFIGURATION +------------- + +merge.summary:: + Whether to include summaries of merged commits in newly + created merge commit. False by default. + +merge.verbosity:: + Controls the amount of output shown by the recursive merge + strategy. Level 0 outputs nothing except a final error + message if conflicts were detected. Level 1 outputs only + conflicts, 2 outputs conflicts and file changes. Level 5 and + above outputs debugging information. The default is level 2. + Can be overridden by 'GIT_MERGE_VERBOSITY' environment variable. + +branch.<name>.mergeoptions:: + Sets default options for merging into branch <name>. The syntax and + supported options are equal to that of git-merge, but option values + containing whitespace characters are currently not supported. + +HOW MERGE WORKS +--------------- + +A merge is always between the current `HEAD` and one or more +commits (usually, branch head or tag), and the index file must +exactly match the +tree of `HEAD` commit (i.e. the contents of the last commit) when +it happens. In other words, `git-diff --cached HEAD` must +report no changes. + +[NOTE] +This is a bit of a lie. In certain special cases, your index is +allowed to be different from the tree of the `HEAD` commit. The most +notable case is when your `HEAD` commit is already ahead of what +is being merged, in which case your index can have arbitrary +differences from your `HEAD` commit. Also, your index entries +may have differences from your `HEAD` commit that match +the result of a trivial merge (e.g. you received the same patch +from an external source to produce the same result as what you are +merging). For example, if a path did not exist in the common +ancestor and your head commit but exists in the tree you are +merging into your repository, and if you already happen to have +that path exactly in your index, the merge does not have to +fail. + +Otherwise, merge will refuse to do any harm to your repository +(that is, it may fetch the objects from remote, and it may even +update the local branch used to keep track of the remote branch +with `git pull remote rbranch:lbranch`, but your working tree, +`.git/HEAD` pointer and index file are left intact). + +You may have local modifications in the working tree files. In +other words, `git-diff` is allowed to report changes. +However, the merge uses your working tree as the working area, +and in order to prevent the merge operation from losing such +changes, it makes sure that they do not interfere with the +merge. Those complex tables in read-tree documentation define +what it means for a path to "interfere with the merge". And if +your local modifications interfere with the merge, again, it +stops before touching anything. + +So in the above two "failed merge" case, you do not have to +worry about loss of data --- you simply were not ready to do +a merge, so no merge happened at all. You may want to finish +whatever you were in the middle of doing, and retry the same +pull after you are done and ready. + +When things cleanly merge, these things happen: + +1. The results are updated both in the index file and in your + working tree; +2. Index file is written out as a tree; +3. The tree gets committed; and +4. The `HEAD` pointer gets advanced. + +Because of 2., we require that the original state of the index +file to match exactly the current `HEAD` commit; otherwise we +will write out your local changes already registered in your +index file along with the merge result, which is not good. +Because 1. involves only the paths different between your +branch and the remote branch you are pulling from during the +merge (which is typically a fraction of the whole tree), you can +have local modifications in your working tree as long as they do +not overlap with what the merge updates. + +When there are conflicts, these things happen: + +1. `HEAD` stays the same. + +2. Cleanly merged paths are updated both in the index file and + in your working tree. + +3. For conflicting paths, the index file records up to three + versions; stage1 stores the version from the common ancestor, + stage2 from `HEAD`, and stage3 from the remote branch (you + can inspect the stages with `git-ls-files -u`). The working + tree files have the result of "merge" program; i.e. 3-way + merge result with familiar conflict markers `<<< === >>>`. + +4. No other changes are done. In particular, the local + modifications you had before you started merge will stay the + same and the index entries for them stay as they were, + i.e. matching `HEAD`. + +After seeing a conflict, you can do two things: + + * Decide not to merge. The only clean-up you need are to reset + the index file to the `HEAD` commit to reverse 2. and to clean + up working tree changes made by 2. and 3.; `git-reset` can + be used for this. + + * Resolve the conflicts. `git-diff` would report only the + conflicting paths because of the above 2. and 3.. Edit the + working tree files into a desirable shape, `git-add` or `git-rm` + them, to make the index file contain what the merge result + should be, and run `git-commit` to commit the result. + + +SEE ALSO +-------- +linkgit:git-fmt-merge-msg[1], linkgit:git-pull[1], +linkgit:gitattributes[5] + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt new file mode 100644 index 0000000..50f106e --- /dev/null +++ b/Documentation/git-mergetool.txt @@ -0,0 +1,51 @@ +git-mergetool(1) +================ + +NAME +---- +git-mergetool - Run merge conflict resolution tools to resolve merge conflicts + +SYNOPSIS +-------- +'git-mergetool' [--tool=<tool>] [<file>]... + +DESCRIPTION +----------- + +Use 'git mergetool' to run one of several merge utilities to resolve +merge conflicts. It is typically run after linkgit:git-merge[1]. + +If one or more <file> parameters are given, the merge tool program will +be run to resolve differences on each file. If no <file> names are +specified, 'git mergetool' will run the merge tool program on every file +with merge conflicts. + +OPTIONS +------- +-t or --tool=<tool>:: + Use the merge resolution program specified by <tool>. + Valid merge tools are: + kdiff3, tkdiff, meld, xxdiff, emerge, vimdiff, gvimdiff, ecmerge, and opendiff ++ +If a merge resolution program is not specified, 'git mergetool' +will use the configuration variable merge.tool. If the +configuration variable merge.tool is not set, 'git mergetool' +will pick a suitable default. ++ +You can explicitly provide a full path to the tool by setting the +configuration variable mergetool.<tool>.path. For example, you +can configure the absolute path to kdiff3 by setting +mergetool.kdiff3.path. Otherwise, 'git mergetool' assumes the tool +is available in PATH. + +Author +------ +Written by Theodore Y Ts'o <tytso@mit.edu> + +Documentation +-------------- +Documentation by Theodore Y Ts'o. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mktag.txt b/Documentation/git-mktag.txt new file mode 100644 index 0000000..82db9f5 --- /dev/null +++ b/Documentation/git-mktag.txt @@ -0,0 +1,46 @@ +git-mktag(1) +============ + +NAME +---- +git-mktag - Creates a tag object + + +SYNOPSIS +-------- +'git-mktag' < signature_file + +DESCRIPTION +----------- +Reads a tag contents on standard input and creates a tag object +that can also be used to sign other objects. + +The output is the new tag's <object> identifier. + +Tag Format +---------- +A tag signature file has a very simple fixed format: four lines of + + object <sha1> + type <typename> + tag <tagname> + tagger <tagger> + +followed by some 'optional' free-form message (some tags created +by older git may not have `tagger` line). The message, when +exists, is separated by a blank line from the header. The +message part may contain a signature that git itself doesn't +care about, but that can be verified with gpg. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt new file mode 100644 index 0000000..f312036 --- /dev/null +++ b/Documentation/git-mktree.txt @@ -0,0 +1,34 @@ +git-mktree(1) +============= + +NAME +---- +git-mktree - Build a tree-object from ls-tree formatted text + + +SYNOPSIS +-------- +'git-mktree' [-z] + +DESCRIPTION +----------- +Reads standard input in non-recursive `ls-tree` output format, +and creates a tree object. The object name of the tree object +built is written to the standard output. + +OPTIONS +------- +-z:: + Read the NUL-terminated `ls-tree -z` output instead. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt new file mode 100644 index 0000000..bff3fbe --- /dev/null +++ b/Documentation/git-mv.txt @@ -0,0 +1,53 @@ +git-mv(1) +========= + +NAME +---- +git-mv - Move or rename a file, a directory, or a symlink + + +SYNOPSIS +-------- +'git-mv' <options>... <args>... + +DESCRIPTION +----------- +This script is used to move or rename a file, directory or symlink. + + git-mv [-f] [-n] <source> <destination> + git-mv [-f] [-n] [-k] <source> ... <destination directory> + +In the first form, it renames <source>, which must exist and be either +a file, symlink or directory, to <destination>. +In the second form, the last argument has to be an existing +directory; the given sources will be moved into this directory. + +The index is updated after successful completion, but the change must still be +committed. + +OPTIONS +------- +-f:: + Force renaming or moving of a file even if the target exists +-k:: + Skip move or rename actions which would lead to an error + condition. An error happens when a source is neither existing nor + controlled by GIT, or when it would overwrite an existing + file unless '-f' is given. +-n, \--dry-run:: + Do nothing; only show what would happen + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> +Rewritten by Ryan Anderson <ryan@michonline.com> +Move functionality added by Josef Weidendorfer <Josef.Weidendorfer@gmx.de> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt new file mode 100644 index 0000000..efcabdc --- /dev/null +++ b/Documentation/git-name-rev.txt @@ -0,0 +1,78 @@ +git-name-rev(1) +=============== + +NAME +---- +git-name-rev - Find symbolic names for given revs + + +SYNOPSIS +-------- +[verse] +'git-name-rev' [--tags] [--refs=<pattern>] + ( --all | --stdin | <committish>... ) + +DESCRIPTION +----------- +Finds symbolic names suitable for human digestion for revisions given in any +format parsable by git-rev-parse. + + +OPTIONS +------- + +--tags:: + Do not use branch names, but only tags to name the commits + +--refs=<pattern>:: + Only use refs whose names match a given shell pattern. + +--all:: + List all commits reachable from all refs + +--stdin:: + Read from stdin, append "(<rev_name>)" to all sha1's of nameable + commits, and pass to stdout + +--name-only:: + Instead of printing both the SHA-1 and the name, print only + the name. If given with --tags the usual tag prefix of + "tags/" is also omitted from the name, matching the output + of linkgit:git-describe[1] more closely. This option + cannot be combined with --stdin. + +EXAMPLE +------- + +Given a commit, find out where it is relative to the local refs. Say somebody +wrote you about that fantastic commit 33db5f4d9027a10e477ccf054b2c1ab94f74c85a. +Of course, you look into the commit, but that only tells you what happened, but +not the context. + +Enter git-name-rev: + +------------ +% git name-rev 33db5f4d9027a10e477ccf054b2c1ab94f74c85a +33db5f4d9027a10e477ccf054b2c1ab94f74c85a tags/v0.99^0~940 +------------ + +Now you are wiser, because you know that it happened 940 revisions before v0.99. + +Another nice thing you can do is: + +------------ +% git log | git name-rev --stdin +------------ + + +Author +------ +Written by Johannes Schindelin <Johannes.Schindelin@gmx.de> + +Documentation +-------------- +Documentation by Johannes Schindelin. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt new file mode 100644 index 0000000..74cc7c1 --- /dev/null +++ b/Documentation/git-pack-objects.txt @@ -0,0 +1,202 @@ +git-pack-objects(1) +=================== + +NAME +---- +git-pack-objects - Create a packed archive of objects + + +SYNOPSIS +-------- +[verse] +'git-pack-objects' [-q] [--no-reuse-delta] [--delta-base-offset] [--non-empty] + [--local] [--incremental] [--window=N] [--depth=N] [--all-progress] + [--revs [--unpacked | --all]*] [--stdout | base-name] < object-list + + +DESCRIPTION +----------- +Reads list of objects from the standard input, and writes a packed +archive with specified base-name, or to the standard output. + +A packed archive is an efficient way to transfer set of objects +between two repositories, and also is an archival format which +is efficient to access. The packed archive format (.pack) is +designed to be unpackable without having anything else, but for +random access, accompanied with the pack index file (.idx). + +Placing both in the pack/ subdirectory of $GIT_OBJECT_DIRECTORY (or +any of the directories on $GIT_ALTERNATE_OBJECT_DIRECTORIES) +enables git to read from such an archive. + +'git-unpack-objects' command can read the packed archive and +expand the objects contained in the pack into "one-file +one-object" format; this is typically done by the smart-pull +commands when a pack is created on-the-fly for efficient network +transport by their peers. + +In a packed archive, an object is either stored as a compressed +whole, or as a difference from some other object. The latter is +often called a delta. + + +OPTIONS +------- +base-name:: + Write into a pair of files (.pack and .idx), using + <base-name> to determine the name of the created file. + When this option is used, the two files are written in + <base-name>-<SHA1>.{pack,idx} files. <SHA1> is a hash + of the sorted object names to make the resulting filename + based on the pack content, and written to the standard + output of the command. + +--stdout:: + Write the pack contents (what would have been written to + .pack file) out to the standard output. + +--revs:: + Read the revision arguments from the standard input, instead of + individual object names. The revision arguments are processed + the same way as linkgit:git-rev-list[1] with `--objects` flag + uses its `commit` arguments to build the list of objects it + outputs. The objects on the resulting list are packed. + +--unpacked:: + This implies `--revs`. When processing the list of + revision arguments read from the standard input, limit + the objects packed to those that are not already packed. + +--all:: + This implies `--revs`. In addition to the list of + revision arguments read from the standard input, pretend + as if all refs under `$GIT_DIR/refs` are specified to be + included. + +--window=[N], --depth=[N]:: + These two options affect how the objects contained in + the pack are stored using delta compression. The + objects are first internally sorted by type, size and + optionally names and compared against the other objects + within --window to see if using delta compression saves + space. --depth limits the maximum delta depth; making + it too deep affects the performance on the unpacker + side, because delta data needs to be applied that many + times to get to the necessary object. + The default value for --window is 10 and --depth is 50. + +--window-memory=[N]:: + This option provides an additional limit on top of `--window`; + the window size will dynamically scale down so as to not take + up more than N bytes in memory. This is useful in + repositories with a mix of large and small objects to not run + out of memory with a large window, but still be able to take + advantage of the large window for the smaller objects. The + size can be suffixed with "k", "m", or "g". + `--window-memory=0` makes memory usage unlimited, which is the + default. + +--max-pack-size=<n>:: + Maximum size of each output packfile, expressed in MiB. + If specified, multiple packfiles may be created. + The default is unlimited. + +--incremental:: + This flag causes an object already in a pack ignored + even if it appears in the standard input. + +--local:: + This flag is similar to `--incremental`; instead of + ignoring all packed objects, it only ignores objects + that are packed and not in the local object store + (i.e. borrowed from an alternate). + +--non-empty:: + Only create a packed archive if it would contain at + least one object. + +--progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal, unless -q + is specified. This flag forces progress status even if + the standard error stream is not directed to a terminal. + +--all-progress:: + When --stdout is specified then progress report is + displayed during the object count and deltification phases + but inhibited during the write-out phase. The reason is + that in some cases the output stream is directly linked + to another command which may wish to display progress + status of its own as it processes incoming pack data. + This flag is like --progress except that it forces progress + report for the write-out phase as well even if --stdout is + used. + +-q:: + This flag makes the command not to report its progress + on the standard error stream. + +--no-reuse-delta:: + When creating a packed archive in a repository that + has existing packs, the command reuses existing deltas. + This sometimes results in a slightly suboptimal pack. + This flag tells the command not to reuse existing deltas + but compute them from scratch. + +--no-reuse-object:: + This flag tells the command not to reuse existing object data at all, + including non deltified object, forcing recompression of everything. + This implies --no-reuse-delta. Useful only in the obscure case where + wholesale enforcement of a different compression level on the + packed data is desired. + +--compression=[N]:: + Specifies compression level for newly-compressed data in the + generated pack. If not specified, pack compression level is + determined first by pack.compression, then by core.compression, + and defaults to -1, the zlib default, if neither is set. + Add \--no-reuse-object if you want to force a uniform compression + level on all data no matter the source. + +--delta-base-offset:: + A packed archive can express base object of a delta as + either 20-byte object name or as an offset in the + stream, but older version of git does not understand the + latter. By default, git-pack-objects only uses the + former format for better compatibility. This option + allows the command to use the latter format for + compactness. Depending on the average delta chain + length, this option typically shrinks the resulting + packfile by 3-5 per-cent. + +--threads=<n>:: + Specifies the number of threads to spawn when searching for best + delta matches. This requires that pack-objects be compiled with + pthreads otherwise this option is ignored with a warning. + This is meant to reduce packing time on multiprocessor machines. + The required amount of memory for the delta search window is + however multiplied by the number of threads. + +--index-version=<version>[,<offset>]:: + This is intended to be used by the test suite only. It allows + to force the version for the generated pack index, and to force + 64-bit index entries on objects located above the given offset. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +------------- +Documentation by Junio C Hamano + +See Also +-------- +linkgit:git-rev-list[1] +linkgit:git-repack[1] +linkgit:git-prune-packed[1] + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-pack-redundant.txt b/Documentation/git-pack-redundant.txt new file mode 100644 index 0000000..af4aa4a --- /dev/null +++ b/Documentation/git-pack-redundant.txt @@ -0,0 +1,57 @@ +git-pack-redundant(1) +===================== + +NAME +---- +git-pack-redundant - Find redundant pack files + + +SYNOPSIS +-------- +'git-pack-redundant' [ --verbose ] [ --alt-odb ] < --all | .pack filename ... > + +DESCRIPTION +----------- +This program computes which packs in your repository +are redundant. The output is suitable for piping to +'xargs rm' if you are in the root of the repository. + +git-pack-redundant accepts a list of objects on standard input. Any objects +given will be ignored when checking which packs are required. This makes the +following command useful when wanting to remove packs which contain unreachable +objects. + +git-fsck --full --unreachable | cut -d ' ' -f3 | \ +git-pack-redundant --all | xargs rm + +OPTIONS +------- + + +--all:: + Processes all packs. Any filenames on the command line are ignored. + +--alt-odb:: + Don't require objects present in packs from alternate object + directories to be present in local packs. + +--verbose:: + Outputs some statistics to stderr. Has a small performance penalty. + +Author +------ +Written by Lukas Sandström <lukass@etek.chalmers.se> + +Documentation +-------------- +Documentation by Lukas Sandström <lukass@etek.chalmers.se> + +See Also +-------- +linkgit:git-pack-objects[1] +linkgit:git-repack[1] +linkgit:git-prune-packed[1] + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt new file mode 100644 index 0000000..e4ff934 --- /dev/null +++ b/Documentation/git-pack-refs.txt @@ -0,0 +1,66 @@ +git-pack-refs(1) +================ + +NAME +---- +git-pack-refs - Pack heads and tags for efficient repository access + +SYNOPSIS +-------- +'git-pack-refs' [--all] [--no-prune] + +DESCRIPTION +----------- + +Traditionally, tips of branches and tags (collectively known as +'refs') were stored one file per ref under `$GIT_DIR/refs` +directory. While many branch tips tend to be updated often, +most tags and some branch tips are never updated. When a +repository has hundreds or thousands of tags, this +one-file-per-ref format both wastes storage and hurts +performance. + +This command is used to solve the storage and performance +problem by stashing the refs in a single file, +`$GIT_DIR/packed-refs`. When a ref is missing from the +traditional `$GIT_DIR/refs` hierarchy, it is looked up in this +file and used if found. + +Subsequent updates to branches always creates new file under +`$GIT_DIR/refs` hierarchy. + +A recommended practice to deal with a repository with too many +refs is to pack its refs with `--all --prune` once, and +occasionally run `git-pack-refs \--prune`. Tags are by +definition stationary and are not expected to change. Branch +heads will be packed with the initial `pack-refs --all`, but +only the currently active branch heads will become unpacked, +and next `pack-refs` (without `--all`) will leave them +unpacked. + + +OPTIONS +------- + +\--all:: + +The command by default packs all tags and refs that are already +packed, and leaves other refs +alone. This is because branches are expected to be actively +developed and packing their tips does not help performance. +This option causes branch tips to be packed as well. Useful for +a repository with many branches of historical interests. + +\--no-prune:: + +The command usually removes loose refs under `$GIT_DIR/refs` +hierarchy after packing them. This option tells it not to. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-parse-remote.txt b/Documentation/git-parse-remote.txt new file mode 100644 index 0000000..deb8b2f --- /dev/null +++ b/Documentation/git-parse-remote.txt @@ -0,0 +1,50 @@ +git-parse-remote(1) +=================== + +NAME +---- +git-parse-remote - Routines to help parsing remote repository access parameters + + +SYNOPSIS +-------- +'. git-parse-remote' + +DESCRIPTION +----------- +This script is included in various scripts to supply +routines to parse files under $GIT_DIR/remotes/ and +$GIT_DIR/branches/ and configuration variables that are related +to fetching, pulling and pushing. + +The primary entry points are: + +get_remote_refs_for_fetch:: + Given the list of user-supplied `<repo> <refspec>...`, + return the list of refs to fetch after canonicalizing + them into `$GIT_DIR` relative paths + (e.g. `refs/heads/foo`). When `<refspec>...` is empty + the returned list of refs consists of the defaults + for the given `<repo>`, if specified in + `$GIT_DIR/remotes/`, `$GIT_DIR/branches/`, or `remote.*.fetch` + configuration. + +get_remote_refs_for_push:: + Given the list of user-supplied `<repo> <refspec>...`, + return the list of refs to push in a form suitable to be + fed to the `git-send-pack` command. When `<refspec>...` + is empty the returned list of refs consists of the + defaults for the given `<repo>`, if specified in + `$GIT_DIR/remotes/`. + +Author +------ +Written by Junio C Hamano. + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-patch-id.txt b/Documentation/git-patch-id.txt new file mode 100644 index 0000000..894852a --- /dev/null +++ b/Documentation/git-patch-id.txt @@ -0,0 +1,42 @@ +git-patch-id(1) +=============== + +NAME +---- +git-patch-id - Compute unique ID for a patch + +SYNOPSIS +-------- +'git-patch-id' < <patch> + +DESCRIPTION +----------- +A "patch ID" is nothing but a SHA1 of the diff associated with a patch, with +whitespace and line numbers ignored. As such, it's "reasonably stable", but at +the same time also reasonably unique, i.e., two patches that have the same "patch +ID" are almost guaranteed to be the same thing. + +IOW, you can use this thing to look for likely duplicate commits. + +When dealing with git-diff-tree output, it takes advantage of +the fact that the patch is prefixed with the object name of the +commit, and outputs two 40-byte hexadecimal string. The first +string is the patch ID, and the second string is the commit ID. +This can be used to make a mapping from patch ID to commit ID. + +OPTIONS +------- +<patch>:: + The diff to create the ID of. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-peek-remote.txt b/Documentation/git-peek-remote.txt new file mode 100644 index 0000000..0001710 --- /dev/null +++ b/Documentation/git-peek-remote.txt @@ -0,0 +1,50 @@ +git-peek-remote(1) +================== + +NAME +---- +git-peek-remote - List the references in a remote repository + + +SYNOPSIS +-------- +'git-peek-remote' [--upload-pack=<git-upload-pack>] [<host>:]<directory> + +DESCRIPTION +----------- +This command is deprecated; use `git-ls-remote` instead. + +OPTIONS +------- +\--upload-pack=<git-upload-pack>:: + Use this to specify the path to 'git-upload-pack' on the + remote side, if it is not found on your $PATH. Some + installations of sshd ignores the user's environment + setup scripts for login shells (e.g. .bash_profile) and + your privately installed git may not be found on the system + default $PATH. Another workaround suggested is to set + up your $PATH in ".bashrc", but this flag is for people + who do not want to pay the overhead for non-interactive + shells, but prefer having a lean .bashrc file (they set most of + the things up in .bash_profile). + +<host>:: + A remote host that houses the repository. When this + part is specified, 'git-upload-pack' is invoked via + ssh. + +<directory>:: + The repository to sync from. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt new file mode 100644 index 0000000..93ee82a --- /dev/null +++ b/Documentation/git-prune-packed.txt @@ -0,0 +1,52 @@ +git-prune-packed(1) +===================== + +NAME +---- +git-prune-packed - Remove extra objects that are already in pack files + + +SYNOPSIS +-------- +'git-prune-packed' [-n] [-q] + + +DESCRIPTION +----------- +This program searches the `$GIT_OBJECT_DIR` for all objects that currently +exist in a pack file as well as the independent object directories. + +All such extra objects are removed. + +A pack is a collection of objects, individually compressed, with delta +compression applied, stored in a single file, with an associated index file. + +Packs are used to reduce the load on mirror systems, backup engines, +disk storage, etc. + + +OPTIONS +------- +-n:: + Don't actually remove any objects, only show those that would have been + removed. + +-q:: + Squelch the progress indicator. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Ryan Anderson <ryan@michonline.com> + +See Also +-------- +linkgit:git-pack-objects[1] +linkgit:git-repack[1] + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt new file mode 100644 index 0000000..f151cff --- /dev/null +++ b/Documentation/git-prune.txt @@ -0,0 +1,63 @@ +git-prune(1) +============ + +NAME +---- +git-prune - Prune all unreachable objects from the object database + + +SYNOPSIS +-------- +'git-prune' [-n] [--expire <expire>] [--] [<head>...] + +DESCRIPTION +----------- + +This runs `git-fsck --unreachable` using all the refs +available in `$GIT_DIR/refs`, optionally with additional set of +objects specified on the command line, and prunes all +objects unreachable from any of these head objects from the object database. +In addition, it +prunes the unpacked objects that are also found in packs by +running `git prune-packed`. + +OPTIONS +------- + +-n:: + Do not remove anything; just report what it would + remove. + +\--:: + Do not interpret any more arguments as options. + +\--expire <time>:: + Only expire loose objects older than <time>. + +<head>...:: + In addition to objects + reachable from any of our references, keep objects + reachable from listed <head>s. + +EXAMPLE +------- + +To prune objects not used by your repository nor another that +borrows from your repository via its +`.git/objects/info/alternates`: + +------------ +$ git prune $(cd ../another && $(git-rev-parse --all)) +------------ + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt new file mode 100644 index 0000000..179bdfc --- /dev/null +++ b/Documentation/git-pull.txt @@ -0,0 +1,182 @@ +git-pull(1) +=========== + +NAME +---- +git-pull - Fetch from and merge with another repository or a local branch + + +SYNOPSIS +-------- +'git-pull' <options> <repository> <refspec>... + + +DESCRIPTION +----------- +Runs `git-fetch` with the given parameters, and calls `git-merge` +to merge the retrieved head(s) into the current branch. + +Note that you can use `.` (current directory) as the +<repository> to pull from the local repository -- this is useful +when merging local branches into the current branch. + + +OPTIONS +------- +include::merge-options.txt[] + +:git-pull: 1 +include::fetch-options.txt[] + +include::pull-fetch-param.txt[] + +include::urls-remotes.txt[] + +include::merge-strategies.txt[] + +\--rebase:: + Instead of a merge, perform a rebase after fetching. If + there is a remote ref for the upstream branch, and this branch + was rebased since last fetched, the rebase uses that information + to avoid rebasing non-local changes. ++ +*NOTE:* This is a potentially _dangerous_ mode of operation. +It rewrites history, which does not bode well when you +published that history already. Do *not* use this option +unless you have read linkgit:git-rebase[1] carefully. + +\--no-rebase:: + Override earlier \--rebase. + +DEFAULT BEHAVIOUR +----------------- + +Often people use `git pull` without giving any parameter. +Traditionally, this has been equivalent to saying `git pull +origin`. However, when configuration `branch.<name>.remote` is +present while on branch `<name>`, that value is used instead of +`origin`. + +In order to determine what URL to use to fetch from, the value +of the configuration `remote.<origin>.url` is consulted +and if there is not any such variable, the value on `URL: ` line +in `$GIT_DIR/remotes/<origin>` file is used. + +In order to determine what remote branches to fetch (and +optionally store in the tracking branches) when the command is +run without any refspec parameters on the command line, values +of the configuration variable `remote.<origin>.fetch` are +consulted, and if there aren't any, `$GIT_DIR/remotes/<origin>` +file is consulted and its `Pull: ` lines are used. +In addition to the refspec formats described in the OPTIONS +section, you can have a globbing refspec that looks like this: + +------------ +refs/heads/*:refs/remotes/origin/* +------------ + +A globbing refspec must have a non-empty RHS (i.e. must store +what were fetched in tracking branches), and its LHS and RHS +must end with `/*`. The above specifies that all remote +branches are tracked using tracking branches in +`refs/remotes/origin/` hierarchy under the same name. + +The rule to determine which remote branch to merge after +fetching is a bit involved, in order not to break backward +compatibility. + +If explicit refspecs were given on the command +line of `git pull`, they are all merged. + +When no refspec was given on the command line, then `git pull` +uses the refspec from the configuration or +`$GIT_DIR/remotes/<origin>`. In such cases, the following +rules apply: + +. If `branch.<name>.merge` configuration for the current + branch `<name>` exists, that is the name of the branch at the + remote site that is merged. + +. If the refspec is a globbing one, nothing is merged. + +. Otherwise the remote branch of the first refspec is merged. + + +EXAMPLES +-------- + +git pull, git pull origin:: + Update the remote-tracking branches for the repository + you cloned from, then merge one of them into your + current branch. Normally the branch merged in is + the HEAD of the remote repository, but the choice is + determined by the branch.<name>.remote and + branch.<name>.merge options; see linkgit:git-config[1] + for details. + +git pull origin next:: + Merge into the current branch the remote branch `next`; + leaves a copy of `next` temporarily in FETCH_HEAD, but + does not update any remote-tracking branches. + +git pull . fixes enhancements:: + Bundle local branch `fixes` and `enhancements` on top of + the current branch, making an Octopus merge. This `git pull .` + syntax is equivalent to `git merge`. + +git pull -s ours . obsolete:: + Merge local branch `obsolete` into the current branch, + using `ours` merge strategy. + +git pull --no-commit . maint:: + Merge local branch `maint` into the current branch, but + do not make a commit automatically. This can be used + when you want to include further changes to the merge, + or want to write your own merge commit message. ++ +You should refrain from abusing this option to sneak substantial +changes into a merge commit. Small fixups like bumping +release/version name would be acceptable. + +Command line pull of multiple branches from one repository:: ++ +------------------------------------------------ +$ git checkout master +$ git fetch origin +pu:pu maint:tmp +$ git pull . tmp +------------------------------------------------ ++ +This updates (or creates, as necessary) branches `pu` and `tmp` +in the local repository by fetching from the branches +(respectively) `pu` and `maint` from the remote repository. ++ +The `pu` branch will be updated even if it is does not +fast-forward; the others will not be. ++ +The final command then merges the newly fetched `tmp` into master. + + +If you tried a pull which resulted in a complex conflicts and +would want to start over, you can recover with +linkgit:git-reset[1]. + + +SEE ALSO +-------- +linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> +and Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Jon Loeliger, +David Greaves, +Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt new file mode 100644 index 0000000..3128170 --- /dev/null +++ b/Documentation/git-push.txt @@ -0,0 +1,197 @@ +git-push(1) +=========== + +NAME +---- +git-push - Update remote refs along with associated objects + + +SYNOPSIS +-------- +[verse] +'git-push' [--all] [--dry-run] [--tags] [--receive-pack=<git-receive-pack>] + [--repo=all] [-f | --force] [-v | --verbose] [<repository> <refspec>...] + +DESCRIPTION +----------- + +Updates remote refs using local refs, while sending objects +necessary to complete the given refs. + +You can make interesting things happen to a repository +every time you push into it, by setting up 'hooks' there. See +documentation for linkgit:git-receive-pack[1]. + + +OPTIONS +------- +<repository>:: + The "remote" repository that is destination of a push + operation. See the section <<URLS,GIT URLS>> below. + +<refspec>:: + The canonical format of a <refspec> parameter is + `+?<src>:<dst>`; that is, an optional plus `+`, followed + by the source ref, followed by a colon `:`, followed by + the destination ref. ++ +The <src> side can be an +arbitrary "SHA1 expression" that can be used as an +argument to `git-cat-file -t`. E.g. `master~4` (push +four parents before the current master head). ++ +The local ref that matches <src> is used +to fast forward the remote ref that matches <dst>. If +the optional plus `+` is used, the remote ref is updated +even if it does not result in a fast forward update. ++ +Note: If no explicit refspec is found, (that is neither +on the command line nor in any Push line of the +corresponding remotes file---see below), then "matching" heads are +pushed: for every head that exists on the local side, the remote side is +updated if a head of the same name already exists on the remote side. ++ +`tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`. ++ +A parameter <ref> without a colon pushes the <ref> from the source +repository to the destination repository under the same name. ++ +Pushing an empty <src> allows you to delete the <dst> ref from +the remote repository. + +\--all:: + Instead of naming each ref to push, specifies that all + refs under `$GIT_DIR/refs/heads/` be pushed. + +\--mirror:: + Instead of naming each ref to push, specifies that all + refs under `$GIT_DIR/refs/heads/` and `$GIT_DIR/refs/tags/` + be mirrored to the remote repository. Newly created local + refs will be pushed to the remote end, locally updated refs + will be force updated on the remote end, and deleted refs + will be removed from the remote end. + +\--dry-run:: + Do everything except actually send the updates. + +\--tags:: + All refs under `$GIT_DIR/refs/tags` are pushed, in + addition to refspecs explicitly listed on the command + line. + +\--receive-pack=<git-receive-pack>:: + Path to the 'git-receive-pack' program on the remote + end. Sometimes useful when pushing to a remote + repository over ssh, and you do not have the program in + a directory on the default $PATH. + +\--exec=<git-receive-pack>:: + Same as \--receive-pack=<git-receive-pack>. + +-f, \--force:: + Usually, the command refuses to update a remote ref that is + not an ancestor of the local ref used to overwrite it. + This flag disables the check. This can cause the + remote repository to lose commits; use it with care. + +\--repo=<repo>:: + When no repository is specified the command defaults to + "origin"; this overrides it. + +\--thin, \--no-thin:: + These options are passed to `git-send-pack`. Thin + transfer spends extra cycles to minimize the number of + objects to be sent and meant to be used on slower connection. + +-v, \--verbose:: + Run verbosely. + +include::urls-remotes.txt[] + +OUTPUT +------ + +The output of "git push" depends on the transport method used; this +section describes the output when pushing over the git protocol (either +locally or via ssh). + +The status of the push is output in tabular form, with each line +representing the status of a single ref. Each line is of the form: + +------------------------------- + <flag> <summary> <from> -> <to> (<reason>) +------------------------------- + +flag:: + A single character indicating the status of the ref. This is + blank for a successfully pushed ref, `!` for a ref that was + rejected or failed to push, and '=' for a ref that was up to + date and did not need pushing (note that the status of up to + date refs is shown only when `git push` is running verbosely). + +summary:: + For a successfully pushed ref, the summary shows the old and new + values of the ref in a form suitable for using as an argument to + `git log` (this is `<old>..<new>` in most cases, and + `<old>...<new>` for forced non-fast forward updates). For a + failed update, more details are given for the failure. + The string `rejected` indicates that git did not try to send the + ref at all (typically because it is not a fast forward). The + string `remote rejected` indicates that the remote end refused + the update; this rejection is typically caused by a hook on the + remote side. The string `remote failure` indicates that the + remote end did not report the successful update of the ref + (perhaps because of a temporary error on the remote side, a + break in the network connection, or other transient error). + +from:: + The name of the local ref being pushed, minus its + `refs/<type>/` prefix. In the case of deletion, the + name of the local ref is omitted. + +to:: + The name of the remote ref being updated, minus its + `refs/<type>/` prefix. + +reason:: + A human-readable explanation. In the case of successfully pushed + refs, no explanation is needed. For a failed ref, the reason for + failure is described. + +Examples +-------- + +git push origin master:: + Find a ref that matches `master` in the source repository + (most likely, it would find `refs/heads/master`), and update + the same ref (e.g. `refs/heads/master`) in `origin` repository + with it. + +git push origin :experimental:: + Find a ref that matches `experimental` in the `origin` repository + (e.g. `refs/heads/experimental`), and delete it. + +git push origin master:satellite/master:: + Find a ref that matches `master` in the source repository + (most likely, it would find `refs/heads/master`), and update + the ref that matches `satellite/master` (most likely, it would + be `refs/remotes/satellite/master`) in `origin` repository with it. + +git push origin master:refs/heads/experimental:: + Create the branch `experimental` in the `origin` repository + by copying the current `master` branch. This form is usually + needed to create a new branch in the remote repository as + there is no `experimental` branch to match. + +Author +------ +Written by Junio C Hamano <junkio@cox.net>, later rewritten in C +by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt new file mode 100644 index 0000000..0fc2b56 --- /dev/null +++ b/Documentation/git-quiltimport.txt @@ -0,0 +1,60 @@ +git-quiltimport(1) +================ + +NAME +---- +git-quiltimport - Applies a quilt patchset onto the current branch + + +SYNOPSIS +-------- +[verse] +'git-quiltimport' [--dry-run] [--author <author>] [--patches <dir>] + + +DESCRIPTION +----------- +Applies a quilt patchset onto the current git branch, preserving +the patch boundaries, patch order, and patch descriptions present +in the quilt patchset. + +For each patch the code attempts to extract the author from the +patch description. If that fails it falls back to the author +specified with --author. If the --author flag was not given +the patch description is displayed and the user is asked to +interactively enter the author of the patch. + +If a subject is not found in the patch description the patch name is +preserved as the 1 line subject in the git description. + +OPTIONS +------- +--dry-run:: + Walk through the patches in the series and warn + if we cannot find all of the necessary information to commit + a patch. At the time of this writing only missing author + information is warned about. + +--author Author Name <Author Email>:: + The author name and email address to use when no author + information can be found in the patch description. + +--patches <dir>:: + The directory to find the quilt patches and the + quilt series file. ++ +The default for the patch directory is patches +or the value of the $QUILT_PATCHES environment +variable. + +Author +------ +Written by Eric Biederman <ebiederm@lnxi.com> + +Documentation +-------------- +Documentation by Eric Biederman <ebiederm@lnxi.com> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt new file mode 100644 index 0000000..8421d1f --- /dev/null +++ b/Documentation/git-read-tree.txt @@ -0,0 +1,364 @@ +git-read-tree(1) +================ + +NAME +---- +git-read-tree - Reads tree information into the index + + +SYNOPSIS +-------- +'git-read-tree' (<tree-ish> | [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u | -i]] [--exclude-per-directory=<gitignore>] [--index-output=<file>] <tree-ish1> [<tree-ish2> [<tree-ish3>]]) + + +DESCRIPTION +----------- +Reads the tree information given by <tree-ish> into the index, +but does not actually *update* any of the files it "caches". (see: +linkgit:git-checkout-index[1]) + +Optionally, it can merge a tree into the index, perform a +fast-forward (i.e. 2-way) merge, or a 3-way merge, with the `-m` +flag. When used with `-m`, the `-u` flag causes it to also update +the files in the work tree with the result of the merge. + +Trivial merges are done by `git-read-tree` itself. Only conflicting paths +will be in unmerged state when `git-read-tree` returns. + +OPTIONS +------- +-m:: + Perform a merge, not just a read. The command will + refuse to run if your index file has unmerged entries, + indicating that you have not finished previous merge you + started. + +--reset:: + Same as -m, except that unmerged entries are discarded + instead of failing. + +-u:: + After a successful merge, update the files in the work + tree with the result of the merge. + +-i:: + Usually a merge requires the index file as well as the + files in the working tree are up to date with the + current head commit, in order not to lose local + changes. This flag disables the check with the working + tree and is meant to be used when creating a merge of + trees that are not directly related to the current + working tree status into a temporary index file. + +--trivial:: + Restrict three-way merge by `git-read-tree` to happen + only if there is no file-level merging required, instead + of resolving merge for trivial cases and leaving + conflicting files unresolved in the index. + +--aggressive:: + Usually a three-way merge by `git-read-tree` resolves + the merge for really trivial cases and leaves other + cases unresolved in the index, so that Porcelains can + implement different merge policies. This flag makes the + command to resolve a few more cases internally: ++ +* when one side removes a path and the other side leaves the path + unmodified. The resolution is to remove that path. +* when both sides remove a path. The resolution is to remove that path. +* when both sides adds a path identically. The resolution + is to add that path. + +--prefix=<prefix>/:: + Keep the current index contents, and read the contents + of named tree-ish under directory at `<prefix>`. The + original index file cannot have anything at the path + `<prefix>` itself, and have nothing in `<prefix>/` + directory. Note that the `<prefix>/` value must end + with a slash. + +--exclude-per-directory=<gitignore>:: + When running the command with `-u` and `-m` options, the + merge result may need to overwrite paths that are not + tracked in the current branch. The command usually + refuses to proceed with the merge to avoid losing such a + path. However this safety valve sometimes gets in the + way. For example, it often happens that the other + branch added a file that used to be a generated file in + your branch, and the safety valve triggers when you try + to switch to that branch after you ran `make` but before + running `make clean` to remove the generated file. This + option tells the command to read per-directory exclude + file (usually '.gitignore') and allows such an untracked + but explicitly ignored file to be overwritten. + +--index-output=<file>:: + Instead of writing the results out to `$GIT_INDEX_FILE`, + write the resulting index in the named file. While the + command is operating, the original index file is locked + with the same mechanism as usual. The file must allow + to be rename(2)ed into from a temporary file that is + created next to the usual index file; typically this + means it needs to be on the same filesystem as the index + file itself, and you need write permission to the + directories the index file and index output file are + located in. + +<tree-ish#>:: + The id of the tree object(s) to be read/merged. + + +Merging +------- +If `-m` is specified, `git-read-tree` can perform 3 kinds of +merge, a single tree merge if only 1 tree is given, a +fast-forward merge with 2 trees, or a 3-way merge if 3 trees are +provided. + + +Single Tree Merge +~~~~~~~~~~~~~~~~~ +If only 1 tree is specified, git-read-tree operates as if the user did not +specify `-m`, except that if the original index has an entry for a +given pathname, and the contents of the path matches with the tree +being read, the stat info from the index is used. (In other words, the +index's stat()s take precedence over the merged tree's). + +That means that if you do a `git-read-tree -m <newtree>` followed by a +`git-checkout-index -f -u -a`, the `git-checkout-index` only checks out +the stuff that really changed. + +This is used to avoid unnecessary false hits when `git-diff-files` is +run after `git-read-tree`. + + +Two Tree Merge +~~~~~~~~~~~~~~ + +Typically, this is invoked as `git-read-tree -m $H $M`, where $H +is the head commit of the current repository, and $M is the head +of a foreign tree, which is simply ahead of $H (i.e. we are in a +fast forward situation). + +When two trees are specified, the user is telling git-read-tree +the following: + + 1. The current index and work tree is derived from $H, but + the user may have local changes in them since $H; + + 2. The user wants to fast-forward to $M. + +In this case, the `git-read-tree -m $H $M` command makes sure +that no local change is lost as the result of this "merge". +Here are the "carry forward" rules: + + I (index) H M Result + ------------------------------------------------------- + 0 nothing nothing nothing (does not happen) + 1 nothing nothing exists use M + 2 nothing exists nothing remove path from index + 3 nothing exists exists use M + + clean I==H I==M + ------------------ + 4 yes N/A N/A nothing nothing keep index + 5 no N/A N/A nothing nothing keep index + + 6 yes N/A yes nothing exists keep index + 7 no N/A yes nothing exists keep index + 8 yes N/A no nothing exists fail + 9 no N/A no nothing exists fail + + 10 yes yes N/A exists nothing remove path from index + 11 no yes N/A exists nothing fail + 12 yes no N/A exists nothing fail + 13 no no N/A exists nothing fail + + clean (H=M) + ------ + 14 yes exists exists keep index + 15 no exists exists keep index + + clean I==H I==M (H!=M) + ------------------ + 16 yes no no exists exists fail + 17 no no no exists exists fail + 18 yes no yes exists exists keep index + 19 no no yes exists exists keep index + 20 yes yes no exists exists use M + 21 no yes no exists exists fail + +In all "keep index" cases, the index entry stays as in the +original index file. If the entry were not up to date, +git-read-tree keeps the copy in the work tree intact when +operating under the -u flag. + +When this form of git-read-tree returns successfully, you can +see what "local changes" you made are carried forward by running +`git-diff-index --cached $M`. Note that this does not +necessarily match `git-diff-index --cached $H` would have +produced before such a two tree merge. This is because of cases +18 and 19 --- if you already had the changes in $M (e.g. maybe +you picked it up via e-mail in a patch form), `git-diff-index +--cached $H` would have told you about the change before this +merge, but it would not show in `git-diff-index --cached $M` +output after two-tree merge. + + +3-Way Merge +~~~~~~~~~~~ +Each "index" entry has two bits worth of "stage" state. stage 0 is the +normal one, and is the only one you'd see in any kind of normal use. + +However, when you do `git-read-tree` with three trees, the "stage" +starts out at 1. + +This means that you can do + +---------------- +$ git-read-tree -m <tree1> <tree2> <tree3> +---------------- + +and you will end up with an index with all of the <tree1> entries in +"stage1", all of the <tree2> entries in "stage2" and all of the +<tree3> entries in "stage3". When performing a merge of another +branch into the current branch, we use the common ancestor tree +as <tree1>, the current branch head as <tree2>, and the other +branch head as <tree3>. + +Furthermore, `git-read-tree` has special-case logic that says: if you see +a file that matches in all respects in the following states, it +"collapses" back to "stage0": + + - stage 2 and 3 are the same; take one or the other (it makes no + difference - the same work has been done on our branch in + stage 2 and their branch in stage 3) + + - stage 1 and stage 2 are the same and stage 3 is different; take + stage 3 (our branch in stage 2 did not do anything since the + ancestor in stage 1 while their branch in stage 3 worked on + it) + + - stage 1 and stage 3 are the same and stage 2 is different take + stage 2 (we did something while they did nothing) + +The `git-write-tree` command refuses to write a nonsensical tree, and it +will complain about unmerged entries if it sees a single entry that is not +stage 0. + +OK, this all sounds like a collection of totally nonsensical rules, +but it's actually exactly what you want in order to do a fast +merge. The different stages represent the "result tree" (stage 0, aka +"merged"), the original tree (stage 1, aka "orig"), and the two trees +you are trying to merge (stage 2 and 3 respectively). + +The order of stages 1, 2 and 3 (hence the order of three +<tree-ish> command line arguments) are significant when you +start a 3-way merge with an index file that is already +populated. Here is an outline of how the algorithm works: + +- if a file exists in identical format in all three trees, it will + automatically collapse to "merged" state by git-read-tree. + +- a file that has _any_ difference what-so-ever in the three trees + will stay as separate entries in the index. It's up to "porcelain + policy" to determine how to remove the non-0 stages, and insert a + merged version. + +- the index file saves and restores with all this information, so you + can merge things incrementally, but as long as it has entries in + stages 1/2/3 (i.e., "unmerged entries") you can't write the result. So + now the merge algorithm ends up being really simple: + + * you walk the index in order, and ignore all entries of stage 0, + since they've already been done. + + * if you find a "stage1", but no matching "stage2" or "stage3", you + know it's been removed from both trees (it only existed in the + original tree), and you remove that entry. + + * if you find a matching "stage2" and "stage3" tree, you remove one + of them, and turn the other into a "stage0" entry. Remove any + matching "stage1" entry if it exists too. .. all the normal + trivial rules .. + +You would normally use `git-merge-index` with supplied +`git-merge-one-file` to do this last step. The script updates +the files in the working tree as it merges each path and at the +end of a successful merge. + +When you start a 3-way merge with an index file that is already +populated, it is assumed that it represents the state of the +files in your work tree, and you can even have files with +changes unrecorded in the index file. It is further assumed +that this state is "derived" from the stage 2 tree. The 3-way +merge refuses to run if it finds an entry in the original index +file that does not match stage 2. + +This is done to prevent you from losing your work-in-progress +changes, and mixing your random changes in an unrelated merge +commit. To illustrate, suppose you start from what has been +committed last to your repository: + +---------------- +$ JC=`git-rev-parse --verify "HEAD^0"` +$ git-checkout-index -f -u -a $JC +---------------- + +You do random edits, without running git-update-index. And then +you notice that the tip of your "upstream" tree has advanced +since you pulled from him: + +---------------- +$ git-fetch git://.... linus +$ LT=`cat .git/FETCH_HEAD` +---------------- + +Your work tree is still based on your HEAD ($JC), but you have +some edits since. Three-way merge makes sure that you have not +added or modified index entries since $JC, and if you haven't, +then does the right thing. So with the following sequence: + +---------------- +$ git-read-tree -m -u `git-merge-base $JC $LT` $JC $LT +$ git-merge-index git-merge-one-file -a +$ echo "Merge with Linus" | \ + git-commit-tree `git-write-tree` -p $JC -p $LT +---------------- + +what you would commit is a pure merge between $JC and $LT without +your work-in-progress changes, and your work tree would be +updated to the result of the merge. + +However, if you have local changes in the working tree that +would be overwritten by this merge,`git-read-tree` will refuse +to run to prevent your changes from being lost. + +In other words, there is no need to worry about what exists only +in the working tree. When you have local changes in a part of +the project that is not involved in the merge, your changes do +not interfere with the merge, and are kept intact. When they +*do* interfere, the merge does not even start (`git-read-tree` +complains loudly and fails without modifying anything). In such +a case, you can simply continue doing what you were in the +middle of doing, and when your working tree is ready (i.e. you +have finished your work-in-progress), attempt the merge again. + + +See Also +-------- +linkgit:git-write-tree[1]; linkgit:git-ls-files[1]; +linkgit:gitignore[5] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt new file mode 100644 index 0000000..c11c645 --- /dev/null +++ b/Documentation/git-rebase.txt @@ -0,0 +1,404 @@ +git-rebase(1) +============= + +NAME +---- +git-rebase - Forward-port local commits to the updated upstream head + +SYNOPSIS +-------- +[verse] +'git-rebase' [-i | --interactive] [-v | --verbose] [-m | --merge] + [-C<n>] [ --whitespace=<option>] [-p | --preserve-merges] + [--onto <newbase>] <upstream> [<branch>] +'git-rebase' --continue | --skip | --abort + +DESCRIPTION +----------- +If <branch> is specified, git-rebase will perform an automatic +`git checkout <branch>` before doing anything else. Otherwise +it remains on the current branch. + +All changes made by commits in the current branch but that are not +in <upstream> are saved to a temporary area. This is the same set +of commits that would be shown by `git log <upstream>..HEAD`. + +The current branch is reset to <upstream>, or <newbase> if the +--onto option was supplied. This has the exact same effect as +`git reset --hard <upstream>` (or <newbase>). + +The commits that were previously saved into the temporary area are +then reapplied to the current branch, one by one, in order. Note that +any commits in HEAD which introduce the same textual changes as a commit +in HEAD..<upstream> are omitted (i.e., a patch already accepted upstream +with a different commit message or timestamp will be skipped). + +It is possible that a merge failure will prevent this process from being +completely automatic. You will have to resolve any such merge failure +and run `git rebase --continue`. Another option is to bypass the commit +that caused the merge failure with `git rebase --skip`. To restore the +original <branch> and remove the .dotest working files, use the command +`git rebase --abort` instead. + +Assume the following history exists and the current branch is "topic": + +------------ + A---B---C topic + / + D---E---F---G master +------------ + +From this point, the result of either of the following commands: + + + git-rebase master + git-rebase master topic + +would be: + +------------ + A'--B'--C' topic + / + D---E---F---G master +------------ + +The latter form is just a short-hand of `git checkout topic` +followed by `git rebase master`. + +If the upstream branch already contains a change you have made (e.g., +because you mailed a patch which was applied upstream), then that commit +will be skipped. For example, running `git-rebase master` on the +following history (in which A' and A introduce the same set of changes, +but have different committer information): + +------------ + A---B---C topic + / + D---E---A'---F master +------------ + +will result in: + +------------ + B'---C' topic + / + D---E---A'---F master +------------ + +Here is how you would transplant a topic branch based on one +branch to another, to pretend that you forked the topic branch +from the latter branch, using `rebase --onto`. + +First let's assume your 'topic' is based on branch 'next'. +For example feature developed in 'topic' depends on some +functionality which is found in 'next'. + +------------ + o---o---o---o---o master + \ + o---o---o---o---o next + \ + o---o---o topic +------------ + +We would want to make 'topic' forked from branch 'master', +for example because the functionality 'topic' branch depend on +got merged into more stable 'master' branch, like this: + +------------ + o---o---o---o---o master + | \ + | o'--o'--o' topic + \ + o---o---o---o---o next +------------ + +We can get this using the following command: + + git-rebase --onto master next topic + + +Another example of --onto option is to rebase part of a +branch. If we have the following situation: + +------------ + H---I---J topicB + / + E---F---G topicA + / + A---B---C---D master +------------ + +then the command + + git-rebase --onto master topicA topicB + +would result in: + +------------ + H'--I'--J' topicB + / + | E---F---G topicA + |/ + A---B---C---D master +------------ + +This is useful when topicB does not depend on topicA. + +A range of commits could also be removed with rebase. If we have +the following situation: + +------------ + E---F---G---H---I---J topicA +------------ + +then the command + + git-rebase --onto topicA~5 topicA~3 topicA + +would result in the removal of commits F and G: + +------------ + E---H'---I'---J' topicA +------------ + +This is useful if F and G were flawed in some way, or should not be +part of topicA. Note that the argument to --onto and the <upstream> +parameter can be any valid commit-ish. + +In case of conflict, git-rebase will stop at the first problematic commit +and leave conflict markers in the tree. You can use git diff to locate +the markers (<<<<<<) and make edits to resolve the conflict. For each +file you edit, you need to tell git that the conflict has been resolved, +typically this would be done with + + + git add <filename> + + +After resolving the conflict manually and updating the index with the +desired resolution, you can continue the rebasing process with + + + git rebase --continue + + +Alternatively, you can undo the git-rebase with + + + git rebase --abort + +OPTIONS +------- +<newbase>:: + Starting point at which to create the new commits. If the + --onto option is not specified, the starting point is + <upstream>. May be any valid commit, and not just an + existing branch name. + +<upstream>:: + Upstream branch to compare against. May be any valid commit, + not just an existing branch name. + +<branch>:: + Working branch; defaults to HEAD. + +--continue:: + Restart the rebasing process after having resolved a merge conflict. + +--abort:: + Restore the original branch and abort the rebase operation. + +--skip:: + Restart the rebasing process by skipping the current patch. + +-m, \--merge:: + Use merging strategies to rebase. When the recursive (default) merge + strategy is used, this allows rebase to be aware of renames on the + upstream side. + +-s <strategy>, \--strategy=<strategy>:: + Use the given merge strategy; can be supplied more than + once to specify them in the order they should be tried. + If there is no `-s` option, a built-in list of strategies + is used instead (`git-merge-recursive` when merging a single + head, `git-merge-octopus` otherwise). This implies --merge. + +-v, \--verbose:: + Display a diffstat of what changed upstream since the last rebase. + +-C<n>:: + Ensure at least <n> lines of surrounding context match before + and after each change. When fewer lines of surrounding + context exist they all must match. By default no context is + ever ignored. + +--whitespace=<nowarn|warn|error|error-all|strip>:: + This flag is passed to the `git-apply` program + (see linkgit:git-apply[1]) that applies the patch. + +-i, \--interactive:: + Make a list of the commits which are about to be rebased. Let the + user edit that list before rebasing. This mode can also be used to + split commits (see SPLITTING COMMITS below). + +-p, \--preserve-merges:: + Instead of ignoring merges, try to recreate them. This option + only works in interactive mode. + +include::merge-strategies.txt[] + +NOTES +----- +When you rebase a branch, you are changing its history in a way that +will cause problems for anyone who already has a copy of the branch +in their repository and tries to pull updates from you. You should +understand the implications of using 'git rebase' on a repository that +you share. + +When the git rebase command is run, it will first execute a "pre-rebase" +hook if one exists. You can use this hook to do sanity checks and +reject the rebase if it isn't appropriate. Please see the template +pre-rebase hook script for an example. + +You must be in the top directory of your project to start (or continue) +a rebase. Upon completion, <branch> will be the current branch. + +INTERACTIVE MODE +---------------- + +Rebasing interactively means that you have a chance to edit the commits +which are rebased. You can reorder the commits, and you can +remove them (weeding out bad or otherwise unwanted patches). + +The interactive mode is meant for this type of workflow: + +1. have a wonderful idea +2. hack on the code +3. prepare a series for submission +4. submit + +where point 2. consists of several instances of + +a. regular use + 1. finish something worthy of a commit + 2. commit +b. independent fixup + 1. realize that something does not work + 2. fix that + 3. commit it + +Sometimes the thing fixed in b.2. cannot be amended to the not-quite +perfect commit it fixes, because that commit is buried deeply in a +patch series. That is exactly what interactive rebase is for: use it +after plenty of "a"s and "b"s, by rearranging and editing +commits, and squashing multiple commits into one. + +Start it with the last commit you want to retain as-is: + + git rebase -i <after-this-commit> + +An editor will be fired up with all the commits in your current branch +(ignoring merge commits), which come after the given commit. You can +reorder the commits in this list to your heart's content, and you can +remove them. The list looks more or less like this: + +------------------------------------------- +pick deadbee The oneline of this commit +pick fa1afe1 The oneline of the next commit +... +------------------------------------------- + +The oneline descriptions are purely for your pleasure; `git-rebase` will +not look at them but at the commit names ("deadbee" and "fa1afe1" in this +example), so do not delete or edit the names. + +By replacing the command "pick" with the command "edit", you can tell +`git-rebase` to stop after applying that commit, so that you can edit +the files and/or the commit message, amend the commit, and continue +rebasing. + +If you want to fold two or more commits into one, replace the command +"pick" with "squash" for the second and subsequent commit. If the +commits had different authors, it will attribute the squashed commit to +the author of the first commit. + +In both cases, or when a "pick" does not succeed (because of merge +errors), the loop will stop to let you fix things, and you can continue +the loop with `git rebase --continue`. + +For example, if you want to reorder the last 5 commits, such that what +was HEAD~4 becomes the new HEAD. To achieve that, you would call +`git-rebase` like this: + +---------------------- +$ git rebase -i HEAD~5 +---------------------- + +And move the first patch to the end of the list. + +You might want to preserve merges, if you have a history like this: + +------------------ + X + \ + A---M---B + / +---o---O---P---Q +------------------ + +Suppose you want to rebase the side branch starting at "A" to "Q". Make +sure that the current HEAD is "B", and call + +----------------------------- +$ git rebase -i -p --onto Q O +----------------------------- + + +SPLITTING COMMITS +----------------- + +In interactive mode, you can mark commits with the action "edit". However, +this does not necessarily mean that 'git rebase' expects the result of this +edit to be exactly one commit. Indeed, you can undo the commit, or you can +add other commits. This can be used to split a commit into two: + +- Start an interactive rebase with 'git rebase -i <commit>^', where + <commit> is the commit you want to split. In fact, any commit range + will do, as long as it contains that commit. + +- Mark the commit you want to split with the action "edit". + +- When it comes to editing that commit, execute 'git reset HEAD^'. The + effect is that the HEAD is rewound by one, and the index follows suit. + However, the working tree stays the same. + +- Now add the changes to the index that you want to have in the first + commit. You can use linkgit:git-add[1] (possibly interactively) and/or + linkgit:git-gui[1] to do that. + +- Commit the now-current index with whatever commit message is appropriate + now. + +- Repeat the last two steps until your working tree is clean. + +- Continue the rebase with 'git rebase --continue'. + +If you are not absolutely sure that the intermediate revisions are +consistent (they compile, pass the testsuite, etc.) you should use +linkgit:git-stash[1] to stash away the not-yet-committed changes +after each commit, test, and amend the commit if fixes are necessary. + + +Authors +------ +Written by Junio C Hamano <junkio@cox.net> and +Johannes E. Schindelin <johannes.schindelin@gmx.de> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt new file mode 100644 index 0000000..4111434 --- /dev/null +++ b/Documentation/git-receive-pack.txt @@ -0,0 +1,165 @@ +git-receive-pack(1) +=================== + +NAME +---- +git-receive-pack - Receive what is pushed into the repository + + +SYNOPSIS +-------- +'git-receive-pack' <directory> + +DESCRIPTION +----------- +Invoked by 'git-send-pack' and updates the repository with the +information fed from the remote end. + +This command is usually not invoked directly by the end user. +The UI for the protocol is on the 'git-send-pack' side, and the +program pair is meant to be used to push updates to remote +repository. For pull operations, see 'git-fetch-pack'. + +The command allows for creation and fast forwarding of sha1 refs +(heads/tags) on the remote end (strictly speaking, it is the +local end receive-pack runs, but to the user who is sitting at +the send-pack end, it is updating the remote. Confused?) + +There are other real-world examples of using update and +post-update hooks found in the Documentation/howto directory. + +git-receive-pack honours the receive.denyNonFastForwards config +option, which tells it if updates to a ref should be denied if they +are not fast-forwards. + +OPTIONS +------- +<directory>:: + The repository to sync into. + +pre-receive Hook +---------------- +Before any ref is updated, if $GIT_DIR/hooks/pre-receive file exists +and is executable, it will be invoked once with no parameters. The +standard input of the hook will be one line per ref to be updated: + + sha1-old SP sha1-new SP refname LF + +The refname value is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 values before +each refname are the object names for the refname before and after +the update. Refs to be created will have sha1-old equal to 0\{40}, +while refs to be deleted will have sha1-new equal to 0\{40}, otherwise +sha1-old and sha1-new should be valid objects in the repository. + +This hook is called before any refname is updated and before any +fast-forward checks are performed. + +If the pre-receive hook exits with a non-zero exit status no updates +will be performed, and the update, post-receive and post-update +hooks will not be invoked either. This can be useful to quickly +bail out if the update is not to be supported. + +update Hook +----------- +Before each ref is updated, if $GIT_DIR/hooks/update file exists +and is executable, it is invoked once per ref, with three parameters: + + $GIT_DIR/hooks/update refname sha1-old sha1-new + +The refname parameter is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 arguments are +the object names for the refname before and after the update. +Note that the hook is called before the refname is updated, +so either sha1-old is 0\{40} (meaning there is no such ref yet), +or it should match what is recorded in refname. + +The hook should exit with non-zero status if it wants to disallow +updating the named ref. Otherwise it should exit with zero. + +Successful execution (a zero exit status) of this hook does not +ensure the ref will actually be updated, it is only a prerequisite. +As such it is not a good idea to send notices (e.g. email) from +this hook. Consider using the post-receive hook instead. + +post-receive Hook +----------------- +After all refs were updated (or attempted to be updated), if any +ref update was successful, and if $GIT_DIR/hooks/post-receive +file exists and is executable, it will be invoke once with no +parameters. The standard input of the hook will be one line +for each successfully updated ref: + + sha1-old SP sha1-new SP refname LF + +The refname value is relative to $GIT_DIR; e.g. for the master +head this is "refs/heads/master". The two sha1 values before +each refname are the object names for the refname before and after +the update. Refs that were created will have sha1-old equal to +0\{40}, while refs that were deleted will have sha1-new equal to +0\{40}, otherwise sha1-old and sha1-new should be valid objects in +the repository. + +Using this hook, it is easy to generate mails describing the updates +to the repository. This example script sends one mail message per +ref listing the commits pushed to the repository: + + #!/bin/sh + # mail out commit update information. + while read oval nval ref + do + if expr "$oval" : '0*$' >/dev/null + then + echo "Created a new ref, with the following commits:" + git-rev-list --pretty "$nval" + else + echo "New commits:" + git-rev-list --pretty "$nval" "^$oval" + fi | + mail -s "Changes to ref $ref" commit-list@mydomain + done + exit 0 + +The exit code from this hook invocation is ignored, however a +non-zero exit code will generate an error message. + +Note that it is possible for refname to not have sha1-new when this +hook runs. This can easily occur if another user modifies the ref +after it was updated by receive-pack, but before the hook was able +to evaluate it. It is recommended that hooks rely on sha1-new +rather than the current value of refname. + +post-update Hook +---------------- +After all other processing, if at least one ref was updated, and +if $GIT_DIR/hooks/post-update file exists and is executable, then +post-update will called with the list of refs that have been updated. +This can be used to implement any repository wide cleanup tasks. + +The exit code from this hook invocation is ignored; the only thing +left for git-receive-pack to do at that point is to exit itself +anyway. + +This hook can be used, for example, to run "git-update-server-info" +if the repository is packed and is served via a dumb transport. + + #!/bin/sh + exec git-update-server-info + + +SEE ALSO +-------- +linkgit:git-send-pack[1] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-reflog.txt b/Documentation/git-reflog.txt new file mode 100644 index 0000000..f9bba36 --- /dev/null +++ b/Documentation/git-reflog.txt @@ -0,0 +1,91 @@ +git-reflog(1) +============= + +NAME +---- +git-reflog - Manage reflog information + + +SYNOPSIS +-------- +'git reflog' <subcommand> <options> + +DESCRIPTION +----------- +The command takes various subcommands, and different options +depending on the subcommand: + +[verse] +git reflog expire [--dry-run] [--stale-fix] [--verbose] + [--expire=<time>] [--expire-unreachable=<time>] [--all] <refs>... + +git reflog [show] [log-options] [<ref>] + +Reflog is a mechanism to record when the tip of branches are +updated. This command is to manage the information recorded in it. + +The subcommand "expire" is used to prune older reflog entries. +Entries older than `expire` time, or entries older than +`expire-unreachable` time and are not reachable from the current +tip, are removed from the reflog. This is typically not used +directly by the end users -- instead, see linkgit:git-gc[1]. + +The subcommand "show" (which is also the default, in the absence of any +subcommands) will take all the normal log options, and show the log of +the reference provided in the command-line (or `HEAD`, by default). +The reflog will cover all recent actions (HEAD reflog records branch switching +as well). It is an alias for 'git log -g --abbrev-commit --pretty=oneline'; +see linkgit:git-log[1]. + +The reflog is useful in various git commands, to specify the old value +of a reference. For example, `HEAD@\{2\}` means "where HEAD used to be +two moves ago", `master@\{one.week.ago\}` means "where master used to +point to one week ago", and so on. See linkgit:git-rev-parse[1] for +more details. + + +OPTIONS +------- + +--stale-fix:: + This revamps the logic -- the definition of "broken commit" + becomes: a commit that is not reachable from any of the refs and + there is a missing object among the commit, tree, or blob + objects reachable from it that is not reachable from any of the + refs. ++ +This computation involves traversing all the reachable objects, i.e. it +has the same cost as 'git prune'. Fortunately, once this is run, we +should not have to ever worry about missing objects, because the current +prune and pack-objects know about reflogs and protect objects referred by +them. + +--expire=<time>:: + Entries older than this time are pruned. Without the + option it is taken from configuration `gc.reflogExpire`, + which in turn defaults to 90 days. + +--expire-unreachable=<time>:: + Entries older than this time and are not reachable from + the current tip of the branch are pruned. Without the + option it is taken from configuration + `gc.reflogExpireUnreachable`, which in turn defaults to + 30 days. + +--all:: + Instead of listing <refs> explicitly, prune all refs. + +--verbose:: + Print extra information on screen. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt new file mode 100644 index 0000000..1b024de --- /dev/null +++ b/Documentation/git-relink.txt @@ -0,0 +1,37 @@ +git-relink(1) +============= + +NAME +---- +git-relink - Hardlink common objects in local repositories + +SYNOPSIS +-------- +'git-relink' [--safe] <dir> [<dir>]\* <master_dir> + +DESCRIPTION +----------- +This will scan 1 or more object repositories and look for objects in common +with a master repository. Objects not already hardlinked to the master +repository will be replaced with a hardlink to the master repository. + +OPTIONS +------- +--safe:: + Stops if two objects with the same hash exist but have different sizes. + Default is to warn and continue. + +<dir>:: + Directories containing a .git/objects/ subdirectory. + +Author +------ +Written by Ryan Anderson <ryan@michonline.com> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt new file mode 100644 index 0000000..2cbd1f7 --- /dev/null +++ b/Documentation/git-remote.txt @@ -0,0 +1,147 @@ +git-remote(1) +============ + +NAME +---- +git-remote - manage set of tracked repositories + + +SYNOPSIS +-------- +[verse] +'git-remote' +'git-remote' add [-t <branch>] [-m <master>] [-f] [--mirror] <name> <url> +'git-remote' rm <name> +'git-remote' show <name> +'git-remote' prune <name> +'git-remote' update [group] + +DESCRIPTION +----------- + +Manage the set of repositories ("remotes") whose branches you track. + + +COMMANDS +-------- + +With no arguments, shows a list of existing remotes. Several +subcommands are available to perform operations on the remotes. + +'add':: + +Adds a remote named <name> for the repository at +<url>. The command `git fetch <name>` can then be used to create and +update remote-tracking branches <name>/<branch>. ++ +With `-f` option, `git fetch <name>` is run immediately after +the remote information is set up. ++ +With `-t <branch>` option, instead of the default glob +refspec for the remote to track all branches under +`$GIT_DIR/remotes/<name>/`, a refspec to track only `<branch>` +is created. You can give more than one `-t <branch>` to track +multiple branches without grabbing all branches. ++ +With `-m <master>` option, `$GIT_DIR/remotes/<name>/HEAD` is set +up to point at remote's `<master>` branch instead of whatever +branch the `HEAD` at the remote repository actually points at. ++ +In mirror mode, enabled with `--mirror`, the refs will not be stored +in the 'refs/remotes/' namespace, but in 'refs/heads/'. This option +only makes sense in bare repositories. + +'rm':: + +Remove the remote named <name>. All remote tracking branches and +configuration settings for the remote are removed. + +'show':: + +Gives some information about the remote <name>. ++ +With `-n` option, the remote heads are not queried first with +`git ls-remote <name>`; cached information is used instead. + +'prune':: + +Deletes all stale tracking branches under <name>. +These stale branches have already been removed from the remote repository +referenced by <name>, but are still locally available in +"remotes/<name>". ++ +With `-n` option, the remote heads are not confirmed first with `git +ls-remote <name>`; cached information is used instead. Use with +caution. + +'update':: + +Fetch updates for a named set of remotes in the repository as defined by +remotes.<group>. If a named group is not specified on the command line, +the configuration parameter remotes.default will get used; if +remotes.default is not defined, all remotes which do not have the +configuration parameter remote.<name>.skipDefaultUpdate set to true will +be updated. (See linkgit:git-config[1]). + + +DISCUSSION +---------- + +The remote configuration is achieved using the `remote.origin.url` and +`remote.origin.fetch` configuration variables. (See +linkgit:git-config[1]). + +Examples +-------- + +* Add a new remote, fetch, and check out a branch from it ++ +------------ +$ git remote +origin +$ git branch -r +origin/master +$ git remote add linux-nfs git://linux-nfs.org/pub/linux/nfs-2.6.git +$ git remote +linux-nfs +origin +$ git fetch +* refs/remotes/linux-nfs/master: storing branch 'master' ... + commit: bf81b46 +$ git branch -r +origin/master +linux-nfs/master +$ git checkout -b nfs linux-nfs/master +... +------------ + +* Imitate 'git clone' but track only selected branches ++ +------------ +$ mkdir project.git +$ cd project.git +$ git init +$ git remote add -f -t master -m master origin git://example.com/git.git/ +$ git merge origin +------------ + + +See Also +-------- +linkgit:git-fetch[1] +linkgit:git-branch[1] +linkgit:git-config[1] + +Author +------ +Written by Junio Hamano + + +Documentation +-------------- +Documentation by J. Bruce Fields and the git-list <git@vger.kernel.org>. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt new file mode 100644 index 0000000..3d95749 --- /dev/null +++ b/Documentation/git-repack.txt @@ -0,0 +1,117 @@ +git-repack(1) +============= + +NAME +---- +git-repack - Pack unpacked objects in a repository + + +SYNOPSIS +-------- +'git-repack' [-a] [-d] [-f] [-l] [-n] [-q] [--window=N] [--depth=N] + +DESCRIPTION +----------- + +This script is used to combine all objects that do not currently +reside in a "pack", into a pack. It can also be used to re-organize +existing packs into a single, more efficient pack. + +A pack is a collection of objects, individually compressed, with +delta compression applied, stored in a single file, with an +associated index file. + +Packs are used to reduce the load on mirror systems, backup +engines, disk storage, etc. + +OPTIONS +------- + +-a:: + Instead of incrementally packing the unpacked objects, + pack everything referenced into a single pack. + Especially useful when packing a repository that is used + for private development and there is no need to worry + about people fetching via dumb protocols from it. Use + with '-d'. This will clean up the objects that `git prune` + leaves behind, but `git fsck --full` shows as + dangling. + +-d:: + After packing, if the newly created packs make some + existing packs redundant, remove the redundant packs. + Also runs linkgit:git-prune-packed[1]. + +-l:: + Pass the `--local` option to `git pack-objects`, see + linkgit:git-pack-objects[1]. + +-f:: + Pass the `--no-reuse-delta` option to `git pack-objects`, see + linkgit:git-pack-objects[1]. + +-q:: + Pass the `-q` option to `git pack-objects`, see + linkgit:git-pack-objects[1]. + +-n:: + Do not update the server information with + `git update-server-info`. + +--window=[N], --depth=[N]:: + These two options affect how the objects contained in the pack are + stored using delta compression. The objects are first internally + sorted by type, size and optionally names and compared against the + other objects within `--window` to see if using delta compression saves + space. `--depth` limits the maximum delta depth; making it too deep + affects the performance on the unpacker side, because delta data needs + to be applied that many times to get to the necessary object. + The default value for --window is 10 and --depth is 50. + +--window-memory=[N]:: + This option provides an additional limit on top of `--window`; + the window size will dynamically scale down so as to not take + up more than N bytes in memory. This is useful in + repositories with a mix of large and small objects to not run + out of memory with a large window, but still be able to take + advantage of the large window for the smaller objects. The + size can be suffixed with "k", "m", or "g". + `--window-memory=0` makes memory usage unlimited, which is the + default. + +--max-pack-size=<n>:: + Maximum size of each output packfile, expressed in MiB. + If specified, multiple packfiles may be created. + The default is unlimited. + + +Configuration +------------- + +When configuration variable `repack.UseDeltaBaseOffset` is set +for the repository, the command passes `--delta-base-offset` +option to `git-pack-objects`; this typically results in slightly +smaller packs, but the generated packs are incompatible with +versions of git older than (and including) v1.4.3; do not set +the variable in a repository that older version of git needs to +be able to read (this includes repositories from which packs can +be copied out over http or rsync, and people who obtained packs +that way can try to use older git with it). + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Ryan Anderson <ryan@michonline.com> + +See Also +-------- +linkgit:git-pack-objects[1] +linkgit:git-prune-packed[1] + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-repo-config.txt b/Documentation/git-repo-config.txt new file mode 100644 index 0000000..2ca3994 --- /dev/null +++ b/Documentation/git-repo-config.txt @@ -0,0 +1,18 @@ +git-repo-config(1) +================== + +NAME +---- +git-repo-config - Get and set repository or global options + + +SYNOPSIS +-------- +'git-repo-config' ... + + +DESCRIPTION +----------- + +This is a synonym for linkgit:git-config[1]. Please refer to the +documentation of that command. diff --git a/Documentation/git-request-pull.txt b/Documentation/git-request-pull.txt new file mode 100644 index 0000000..270df9b --- /dev/null +++ b/Documentation/git-request-pull.txt @@ -0,0 +1,39 @@ +git-request-pull(1) +=================== + +NAME +---- +git-request-pull - Generates a summary of pending changes + +SYNOPSIS +-------- +'git-request-pull' <start> <url> [<end>] + +DESCRIPTION +----------- + +Summarizes the changes between two commits to the standard output, and includes +the given URL in the generated summary. + +OPTIONS +------- +<start>:: + Commit to start at. + +<url>:: + URL to include in the summary. + +<end>:: + Commit to send at; defaults to HEAD. + +Author +------ +Written by Ryan Anderson <ryan@michonline.com> and Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-rerere.txt b/Documentation/git-rerere.txt new file mode 100644 index 0000000..a53858e --- /dev/null +++ b/Documentation/git-rerere.txt @@ -0,0 +1,211 @@ +git-rerere(1) +============= + +NAME +---- +git-rerere - Reuse recorded resolution of conflicted merges + +SYNOPSIS +-------- +'git-rerere' [clear|diff|status|gc] + +DESCRIPTION +----------- + +In a workflow that employs relatively long lived topic branches, +the developer sometimes needs to resolve the same conflict over +and over again until the topic branches are done (either merged +to the "release" branch, or sent out and accepted upstream). + +This command helps this process by recording conflicted +automerge results and corresponding hand-resolve results on the +initial manual merge, and later by noticing the same automerge +results and applying the previously recorded hand resolution. + +[NOTE] +You need to set the configuration variable rerere.enabled to +enable this command. + + +COMMANDS +-------- + +Normally, git-rerere is run without arguments or user-intervention. +However, it has several commands that allow it to interact with +its working state. + +'clear':: + +This resets the metadata used by rerere if a merge resolution is to be +is aborted. Calling linkgit:git-am[1] --skip or linkgit:git-rebase[1] +[--skip|--abort] will automatically invoke this command. + +'diff':: + +This displays diffs for the current state of the resolution. It is +useful for tracking what has changed while the user is resolving +conflicts. Additional arguments are passed directly to the system +diff(1) command installed in PATH. + +'status':: + +Like diff, but this only prints the filenames that will be tracked +for resolutions. + +'gc':: + +This command is used to prune records of conflicted merge that +occurred long time ago. By default, conflicts older than 15 +days that you have not recorded their resolution, and conflicts +older than 60 days, are pruned. These are controlled with +`gc.rerereunresolved` and `gc.rerereresolved` configuration +variables. + + +DISCUSSION +---------- + +When your topic branch modifies overlapping area that your +master branch (or upstream) touched since your topic branch +forked from it, you may want to test it with the latest master, +even before your topic branch is ready to be pushed upstream: + +------------ + o---*---o topic + / + o---o---o---*---o---o master +------------ + +For such a test, you need to merge master and topic somehow. +One way to do it is to pull master into the topic branch: + +------------ + $ git checkout topic + $ git merge master + + o---*---o---+ topic + / / + o---o---o---*---o---o master +------------ + +The commits marked with `*` touch the same area in the same +file; you need to resolve the conflicts when creating the commit +marked with `+`. Then you can test the result to make sure your +work-in-progress still works with what is in the latest master. + +After this test merge, there are two ways to continue your work +on the topic. The easiest is to build on top of the test merge +commit `+`, and when your work in the topic branch is finally +ready, pull the topic branch into master, and/or ask the +upstream to pull from you. By that time, however, the master or +the upstream might have been advanced since the test merge `+`, +in which case the final commit graph would look like this: + +------------ + $ git checkout topic + $ git merge master + $ ... work on both topic and master branches + $ git checkout master + $ git merge topic + + o---*---o---+---o---o topic + / / \ + o---o---o---*---o---o---o---o---+ master +------------ + +When your topic branch is long-lived, however, your topic branch +would end up having many such "Merge from master" commits on it, +which would unnecessarily clutter the development history. +Readers of the Linux kernel mailing list may remember that Linus +complained about such too frequent test merges when a subsystem +maintainer asked to pull from a branch full of "useless merges". + +As an alternative, to keep the topic branch clean of test +merges, you could blow away the test merge, and keep building on +top of the tip before the test merge: + +------------ + $ git checkout topic + $ git merge master + $ git reset --hard HEAD^ ;# rewind the test merge + $ ... work on both topic and master branches + $ git checkout master + $ git merge topic + + o---*---o-------o---o topic + / \ + o---o---o---*---o---o---o---o---+ master +------------ + +This would leave only one merge commit when your topic branch is +finally ready and merged into the master branch. This merge +would require you to resolve the conflict, introduced by the +commits marked with `*`. However, often this conflict is the +same conflict you resolved when you created the test merge you +blew away. `git-rerere` command helps you to resolve this final +conflicted merge using the information from your earlier hand +resolve. + +Running `git-rerere` command immediately after a conflicted +automerge records the conflicted working tree files, with the +usual conflict markers `<<<<<<<`, `=======`, and `>>>>>>>` in +them. Later, after you are done resolving the conflicts, +running `git-rerere` again records the resolved state of these +files. Suppose you did this when you created the test merge of +master into the topic branch. + +Next time, running `git-rerere` after seeing a conflicted +automerge, if the conflict is the same as the earlier one +recorded, it is noticed and a three-way merge between the +earlier conflicted automerge, the earlier manual resolution, and +the current conflicted automerge is performed by the command. +If this three-way merge resolves cleanly, the result is written +out to your working tree file, so you would not have to manually +resolve it. Note that `git-rerere` leaves the index file alone, +so you still need to do the final sanity checks with `git diff` +(or `git diff -c`) and `git add` when you are satisfied. + +As a convenience measure, `git-merge` automatically invokes +`git-rerere` when it exits with a failed automerge, which +records it if it is a new conflict, or reuses the earlier hand +resolve when it is not. `git-commit` also invokes `git-rerere` +when recording a merge result. What this means is that you do +not have to do anything special yourself (Note: you still have +to set the config variable rerere.enabled to enable this command). + +In our example, when you did the test merge, the manual +resolution is recorded, and it will be reused when you do the +actual merge later with updated master and topic branch, as long +as the earlier resolution is still applicable. + +The information `git-rerere` records is also used when running +`git-rebase`. After blowing away the test merge and continuing +development on the topic branch: + +------------ + o---*---o-------o---o topic + / + o---o---o---*---o---o---o---o master + + $ git rebase master topic + + o---*---o-------o---o topic + / + o---o---o---*---o---o---o---o master +------------ + +you could run `git rebase master topic`, to keep yourself +up-to-date even before your topic is ready to be sent upstream. +This would result in falling back to three-way merge, and it +would conflict the same way the test merge you resolved earlier. +`git-rerere` is run by `git rebase` to help you resolve this +conflict. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt new file mode 100644 index 0000000..fac59c9 --- /dev/null +++ b/Documentation/git-reset.txt @@ -0,0 +1,206 @@ +git-reset(1) +============ + +NAME +---- +git-reset - Reset current HEAD to the specified state + +SYNOPSIS +-------- +[verse] +'git reset' [--mixed | --soft | --hard] [-q] [<commit>] +'git reset' [-q] [<commit>] [--] <paths>... + +DESCRIPTION +----------- +Sets the current head to the specified commit and optionally resets the +index and working tree to match. + +This command is useful if you notice some small error in a recent +commit (or set of commits) and want to redo that part without showing +the undo in the history. + +If you want to undo a commit other than the latest on a branch, +linkgit:git-revert[1] is your friend. + +The second form with 'paths' is used to revert selected paths in +the index from a given commit, without moving HEAD. + + +OPTIONS +------- +--mixed:: + Resets the index but not the working tree (i.e., the changed files + are preserved but not marked for commit) and reports what has not + been updated. This is the default action. + +--soft:: + Does not touch the index file nor the working tree at all, but + requires them to be in a good order. This leaves all your changed + files "Changes to be committed", as linkgit:git-status[1] would + put it. + +--hard:: + Matches the working tree and index to that of the tree being + switched to. Any changes to tracked files in the working tree + since <commit> are lost. + +-q:: + Be quiet, only report errors. + +<commit>:: + Commit to make the current HEAD. If not given defaults to HEAD. + +Examples +-------- + +Undo a commit and redo:: ++ +------------ +$ git commit ... +$ git reset --soft HEAD^ <1> +$ edit <2> +$ git commit -a -c ORIG_HEAD <3> +------------ ++ +<1> This is most often done when you remembered what you +just committed is incomplete, or you misspelled your commit +message, or both. Leaves working tree as it was before "reset". +<2> Make corrections to working tree files. +<3> "reset" copies the old head to .git/ORIG_HEAD; redo the +commit by starting with its log message. If you do not need to +edit the message further, you can give -C option instead. ++ +See also the --amend option to linkgit:git-commit[1]. + +Undo commits permanently:: ++ +------------ +$ git commit ... +$ git reset --hard HEAD~3 <1> +------------ ++ +<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad +and you do not want to ever see them again. Do *not* do this if +you have already given these commits to somebody else. + +Undo a commit, making it a topic branch:: ++ +------------ +$ git branch topic/wip <1> +$ git reset --hard HEAD~3 <2> +$ git checkout topic/wip <3> +------------ ++ +<1> You have made some commits, but realize they were premature +to be in the "master" branch. You want to continue polishing +them in a topic branch, so create "topic/wip" branch off of the +current HEAD. +<2> Rewind the master branch to get rid of those three commits. +<3> Switch to "topic/wip" branch and keep working. + +Undo add:: ++ +------------ +$ edit <1> +$ git add frotz.c filfre.c +$ mailx <2> +$ git reset <3> +$ git pull git://info.example.com/ nitfol <4> +------------ ++ +<1> You are happily working on something, and find the changes +in these files are in good order. You do not want to see them +when you run "git diff", because you plan to work on other files +and changes with these files are distracting. +<2> Somebody asks you to pull, and the changes sounds worthy of merging. +<3> However, you already dirtied the index (i.e. your index does +not match the HEAD commit). But you know the pull you are going +to make does not affect frotz.c nor filfre.c, so you revert the +index changes for these two files. Your changes in working tree +remain there. +<4> Then you can pull and merge, leaving frotz.c and filfre.c +changes still in the working tree. + +Undo a merge or pull:: ++ +------------ +$ git pull <1> +Auto-merging nitfol +CONFLICT (content): Merge conflict in nitfol +Automatic merge failed/prevented; fix up by hand +$ git reset --hard <2> +$ git pull . topic/branch <3> +Updating from 41223... to 13134... +Fast forward +$ git reset --hard ORIG_HEAD <4> +------------ ++ +<1> Try to update from the upstream resulted in a lot of +conflicts; you were not ready to spend a lot of time merging +right now, so you decide to do that later. +<2> "pull" has not made merge commit, so "git reset --hard" +which is a synonym for "git reset --hard HEAD" clears the mess +from the index file and the working tree. +<3> Merge a topic branch into the current branch, which resulted +in a fast forward. +<4> But you decided that the topic branch is not ready for public +consumption yet. "pull" or "merge" always leaves the original +tip of the current branch in ORIG_HEAD, so resetting hard to it +brings your index file and the working tree back to that state, +and resets the tip of the branch to that commit. + +Interrupted workflow:: ++ +Suppose you are interrupted by an urgent fix request while you +are in the middle of a large change. The files in your +working tree are not in any shape to be committed yet, but you +need to get to the other branch for a quick bugfix. ++ +------------ +$ git checkout feature ;# you were working in "feature" branch and +$ work work work ;# got interrupted +$ git commit -a -m "snapshot WIP" <1> +$ git checkout master +$ fix fix fix +$ git commit ;# commit with real log +$ git checkout feature +$ git reset --soft HEAD^ ;# go back to WIP state <2> +$ git reset <3> +------------ ++ +<1> This commit will get blown away so a throw-away log message is OK. +<2> This removes the 'WIP' commit from the commit history, and sets + your working tree to the state just before you made that snapshot. +<3> At this point the index file still has all the WIP changes you + committed as 'snapshot WIP'. This updates the index to show your + WIP files as uncommitted. + +Reset a single file in the index:: ++ +Suppose you have added a file to your index, but later decide you do not +want to add it to your commit. You can remove the file from the index +while keeping your changes with git reset. ++ +------------ +$ git reset -- frotz.c <1> +$ git commit -m "Commit files in index" <2> +$ git add frotz.c <3> +------------ ++ +<1> This removes the file from the index while keeping it in the working + directory. +<2> This commits all other changes in the index. +<3> Adds the file to the index again. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> and Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-rev-list.txt b/Documentation/git-rev-list.txt new file mode 100644 index 0000000..5b96eab --- /dev/null +++ b/Documentation/git-rev-list.txt @@ -0,0 +1,108 @@ +git-rev-list(1) +=============== + +NAME +---- +git-rev-list - Lists commit objects in reverse chronological order + + +SYNOPSIS +-------- +[verse] +'git-rev-list' [ \--max-count=number ] + [ \--skip=number ] + [ \--max-age=timestamp ] + [ \--min-age=timestamp ] + [ \--sparse ] + [ \--no-merges ] + [ \--first-parent ] + [ \--remove-empty ] + [ \--full-history ] + [ \--not ] + [ \--all ] + [ \--stdin ] + [ \--quiet ] + [ \--topo-order ] + [ \--parents ] + [ \--timestamp ] + [ \--left-right ] + [ \--cherry-pick ] + [ \--encoding[=<encoding>] ] + [ \--(author|committer|grep)=<pattern> ] + [ \--regexp-ignore-case | \-i ] + [ \--extended-regexp | \-E ] + [ \--date={local|relative|default|iso|rfc|short} ] + [ [\--objects | \--objects-edge] [ \--unpacked ] ] + [ \--pretty | \--header ] + [ \--bisect ] + [ \--bisect-vars ] + [ \--bisect-all ] + [ \--merge ] + [ \--reverse ] + [ \--walk-reflogs ] + [ \--no-walk ] [ \--do-walk ] + <commit>... [ \-- <paths>... ] + +DESCRIPTION +----------- + +Lists commit objects in reverse chronological order starting at the +given commit(s), taking ancestry relationship into account. This is +useful to produce human-readable log output. + +Commits which are stated with a preceding '{caret}' cause listing to +stop at that point. Their parents are implied. Thus the following +command: + +----------------------------------------------------------------------- + $ git-rev-list foo bar ^baz +----------------------------------------------------------------------- + +means "list all the commits which are included in 'foo' and 'bar', but +not in 'baz'". + +A special notation "'<commit1>'..'<commit2>'" can be used as a +short-hand for "{caret}'<commit1>' '<commit2>'". For example, either of +the following may be used interchangeably: + +----------------------------------------------------------------------- + $ git-rev-list origin..HEAD + $ git-rev-list HEAD ^origin +----------------------------------------------------------------------- + +Another special notation is "'<commit1>'...'<commit2>'" which is useful +for merges. The resulting set of commits is the symmetric difference +between the two operands. The following two commands are equivalent: + +----------------------------------------------------------------------- + $ git-rev-list A B --not $(git-merge-base --all A B) + $ git-rev-list A...B +----------------------------------------------------------------------- + +linkgit:git-rev-list[1] is a very essential git program, since it +provides the ability to build and traverse commit ancestry graphs. For +this reason, it has a lot of different options that enables it to be +used by commands as different as linkgit:git-bisect[1] and +linkgit:git-repack[1]. + +OPTIONS +------- + +:git-rev-list: 1 +include::rev-list-options.txt[] + +include::pretty-formats.txt[] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano, Jonas Fonseca +and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt new file mode 100644 index 0000000..f02f6bb --- /dev/null +++ b/Documentation/git-rev-parse.txt @@ -0,0 +1,381 @@ +git-rev-parse(1) +================ + +NAME +---- +git-rev-parse - Pick out and massage parameters + + +SYNOPSIS +-------- +'git-rev-parse' [ --option ] <args>... + +DESCRIPTION +----------- + +Many git porcelainish commands take mixture of flags +(i.e. parameters that begin with a dash '-') and parameters +meant for underlying `git-rev-list` command they use internally +and flags and parameters for other commands they use as the +downstream of `git-rev-list`. This command is used to +distinguish between them. + + +OPTIONS +------- +--parseopt:: + Use `git-rev-parse` in option parsing mode (see PARSEOPT section below). + +--keep-dash-dash:: + Only meaningful in `--parseopt` mode. Tells the option parser to echo + out the first `--` met instead of skipping it. + +--revs-only:: + Do not output flags and parameters not meant for + `git-rev-list` command. + +--no-revs:: + Do not output flags and parameters meant for + `git-rev-list` command. + +--flags:: + Do not output non-flag parameters. + +--no-flags:: + Do not output flag parameters. + +--default <arg>:: + If there is no parameter given by the user, use `<arg>` + instead. + +--verify:: + The parameter given must be usable as a single, valid + object name. Otherwise barf and abort. + +--sq:: + Usually the output is made one line per flag and + parameter. This option makes output a single line, + properly quoted for consumption by shell. Useful when + you expect your parameter to contain whitespaces and + newlines (e.g. when using pickaxe `-S` with + `git-diff-\*`). + +--not:: + When showing object names, prefix them with '{caret}' and + strip '{caret}' prefix from the object names that already have + one. + +--symbolic:: + Usually the object names are output in SHA1 form (with + possible '{caret}' prefix); this option makes them output in a + form as close to the original input as possible. + +--symbolic-full-name:: + This is similar to \--symbolic, but it omits input that + are not refs (i.e. branch or tag names; or more + explicitly disambiguating "heads/master" form, when you + want to name the "master" branch when there is an + unfortunately named tag "master"), and show them as full + refnames (e.g. "refs/heads/master"). + +--all:: + Show all refs found in `$GIT_DIR/refs`. + +--branches:: + Show branch refs found in `$GIT_DIR/refs/heads`. + +--tags:: + Show tag refs found in `$GIT_DIR/refs/tags`. + +--remotes:: + Show tag refs found in `$GIT_DIR/refs/remotes`. + +--show-prefix:: + When the command is invoked from a subdirectory, show the + path of the current directory relative to the top-level + directory. + +--show-cdup:: + When the command is invoked from a subdirectory, show the + path of the top-level directory relative to the current + directory (typically a sequence of "../", or an empty string). + +--git-dir:: + Show `$GIT_DIR` if defined else show the path to the .git directory. + +--is-inside-git-dir:: + When the current working directory is below the repository + directory print "true", otherwise "false". + +--is-inside-work-tree:: + When the current working directory is inside the work tree of the + repository print "true", otherwise "false". + +--is-bare-repository:: + When the repository is bare print "true", otherwise "false". + +--short, --short=number:: + Instead of outputting the full SHA1 values of object names try to + abbreviate them to a shorter unique name. When no length is specified + 7 is used. The minimum length is 4. + +--since=datestring, --after=datestring:: + Parses the date string, and outputs corresponding + --max-age= parameter for git-rev-list command. + +--until=datestring, --before=datestring:: + Parses the date string, and outputs corresponding + --min-age= parameter for git-rev-list command. + +<args>...:: + Flags and parameters to be parsed. + + +SPECIFYING REVISIONS +-------------------- + +A revision parameter typically, but not necessarily, names a +commit object. They use what is called an 'extended SHA1' +syntax. Here are various ways to spell object names. The +ones listed near the end of this list are to name trees and +blobs contained in a commit. + +* The full SHA1 object name (40-byte hexadecimal string), or + a substring of such that is unique within the repository. + E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both + name the same commit object if there are no other object in + your repository whose object name starts with dae86e. + +* An output from `git-describe`; i.e. a closest tag, followed by a + dash, a `g`, and an abbreviated object name. + +* A symbolic ref name. E.g. 'master' typically means the commit + object referenced by $GIT_DIR/refs/heads/master. If you + happen to have both heads/master and tags/master, you can + explicitly say 'heads/master' to tell git which one you mean. + When ambiguous, a `<name>` is disambiguated by taking the + first match in the following rules: + + . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually + useful only for `HEAD`, `FETCH_HEAD` and `MERGE_HEAD`); + + . otherwise, `$GIT_DIR/refs/<name>` if exists; + + . otherwise, `$GIT_DIR/refs/tags/<name>` if exists; + + . otherwise, `$GIT_DIR/refs/heads/<name>` if exists; + + . otherwise, `$GIT_DIR/refs/remotes/<name>` if exists; + + . otherwise, `$GIT_DIR/refs/remotes/<name>/HEAD` if exists. + +* A ref followed by the suffix '@' with a date specification + enclosed in a brace + pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 + second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value + of the ref at a prior point in time. This suffix may only be + used immediately following a ref name and the ref must have an + existing log ($GIT_DIR/logs/<ref>). + +* A ref followed by the suffix '@' with an ordinal specification + enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify + the n-th prior value of that ref. For example 'master@\{1\}' + is the immediate prior value of 'master' while 'master@\{5\}' + is the 5th prior value of 'master'. This suffix may only be used + immediately following a ref name and the ref must have an existing + log ($GIT_DIR/logs/<ref>). + +* You can use the '@' construct with an empty ref part to get at a + reflog of the current branch. For example, if you are on the + branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'. + +* A suffix '{caret}' to a revision parameter means the first parent of + that commit object. '{caret}<n>' means the <n>th parent (i.e. + 'rev{caret}' + is equivalent to 'rev{caret}1'). As a special rule, + 'rev{caret}0' means the commit itself and is used when 'rev' is the + object name of a tag object that refers to a commit object. + +* A suffix '{tilde}<n>' to a revision parameter means the commit + object that is the <n>th generation grand-parent of the named + commit object, following only the first parent. I.e. rev~3 is + equivalent to rev{caret}{caret}{caret} which is equivalent to + rev{caret}1{caret}1{caret}1. See below for a illustration of + the usage of this form. + +* A suffix '{caret}' followed by an object type name enclosed in + brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object + could be a tag, and dereference the tag recursively until an + object of that type is found or the object cannot be + dereferenced anymore (in which case, barf). `rev{caret}0` + introduced earlier is a short-hand for `rev{caret}\{commit\}`. + +* A suffix '{caret}' followed by an empty brace pair + (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag, + and dereference the tag recursively until a non-tag object is + found. + +* A colon, followed by a slash, followed by a text: this names + a commit whose commit message starts with the specified text. + This name returns the youngest matching commit which is + reachable from any ref. If the commit message starts with a + '!', you have to repeat that; the special sequence ':/!', + followed by something else than '!' is reserved for now. + +* A suffix ':' followed by a path; this names the blob or tree + at the given path in the tree-ish object named by the part + before the colon. + +* A colon, optionally followed by a stage number (0 to 3) and a + colon, followed by a path; this names a blob object in the + index at the given path. Missing stage number (and the colon + that follows it) names a stage 0 entry. During a merge, stage + 1 is the common ancestor, stage 2 is the target branch's version + (typically the current branch), and stage 3 is the version from + the branch being merged. + +Here is an illustration, by Jon Loeliger. Both commit nodes B +and C are parents of commit node A. Parent commits are ordered +left-to-right. + + G H I J + \ / \ / + D E F + \ | / \ + \ | / | + \|/ | + B C + \ / + \ / + A + + A = = A^0 + B = A^ = A^1 = A~1 + C = A^2 = A^2 + D = A^^ = A^1^1 = A~2 + E = B^2 = A^^2 + F = B^3 = A^^3 + G = A^^^ = A^1^1^1 = A~3 + H = D^2 = B^^2 = A^^^2 = A~2^2 + I = F^ = B^3^ = A^^3^ + J = F^2 = B^3^2 = A^^3^2 + + +SPECIFYING RANGES +----------------- + +History traversing commands such as `git-log` operate on a set +of commits, not just a single commit. To these commands, +specifying a single revision with the notation described in the +previous section means the set of commits reachable from that +commit, following the commit ancestry chain. + +To exclude commits reachable from a commit, a prefix `{caret}` +notation is used. E.g. "`{caret}r1 r2`" means commits reachable +from `r2` but exclude the ones reachable from `r1`. + +This set operation appears so often that there is a shorthand +for it. "`r1..r2`" is equivalent to "`{caret}r1 r2`". It is +the difference of two sets (subtract the set of commits +reachable from `r1` from the set of commits reachable from +`r2`). + +A similar notation "`r1\...r2`" is called symmetric difference +of `r1` and `r2` and is defined as +"`r1 r2 --not $(git-merge-base --all r1 r2)`". +It is the set of commits that are reachable from either one of +`r1` or `r2` but not from both. + +Two other shorthands for naming a set that is formed by a commit +and its parent commits exists. `r1{caret}@` notation means all +parents of `r1`. `r1{caret}!` includes commit `r1` but excludes +its all parents. + +Here are a handful of examples: + + D G H D + D F G H I J D F + ^G D H D + ^D B E I J F B + B...C G H D E B C + ^D B C E I J F B C + C^@ I J F + F^! D G H D F + +PARSEOPT +-------- + +In `--parseopt` mode, `git-rev-parse` helps massaging options to bring to shell +scripts the same facilities C builtins have. It works as an option normalizer +(e.g. splits single switches aggregate values), a bit like `getopt(1)` does. + +It takes on the standard input the specification of the options to parse and +understand, and echoes on the standard output a line suitable for `sh(1)` `eval` +to replace the arguments with normalized ones. In case of error, it outputs +usage on the standard error stream, and exits with code 129. + +Input Format +~~~~~~~~~~~~ + +`git-rev-parse --parseopt` input format is fully text based. It has two parts, +separated by a line that contains only `--`. The lines before the separator +(should be more than one) are used for the usage. +The lines after the separator describe the options. + +Each line of options has this format: + +------------ +<opt_spec><arg_spec>? SP+ help LF +------------ + +`<opt_spec>`:: + its format is the short option character, then the long option name + separated by a comma. Both parts are not required, though at least one + is necessary. `h,help`, `dry-run` and `f` are all three correct + `<opt_spec>`. + +`<arg_spec>`:: + an `<arg_spec>` tells the option parser if the option has an argument + (`=`), an optional one (`?` though its use is discouraged) or none + (no `<arg_spec>` in that case). + +The remainder of the line, after stripping the spaces, is used +as the help associated to the option. + +Blank lines are ignored, and lines that don't match this specification are used +as option group headers (start the line with a space to create such +lines on purpose). + +Example +~~~~~~~ + +------------ +OPTS_SPEC="\ +some-command [options] <args>... + +some-command does foo and bar! +-- +h,help show the help + +foo some nifty option --foo +bar= some cool option --bar with an argument + + An option group Header +C? option C with an optional argument" + +eval `echo "$OPTS_SPEC" | git-rev-parse --parseopt -- "$@" || echo exit $?` +------------ + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> . +Junio C Hamano <junkio@cox.net> and Pierre Habouzit <madcoder@debian.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt new file mode 100644 index 0000000..93e20f7 --- /dev/null +++ b/Documentation/git-revert.txt @@ -0,0 +1,65 @@ +git-revert(1) +============= + +NAME +---- +git-revert - Revert an existing commit + +SYNOPSIS +-------- +'git-revert' [--edit | --no-edit] [-n] [-m parent-number] <commit> + +DESCRIPTION +----------- +Given one existing commit, revert the change the patch introduces, and record a +new commit that records it. This requires your working tree to be clean (no +modifications from the HEAD commit). + +OPTIONS +------- +<commit>:: + Commit to revert. + For a more complete list of ways to spell commit names, see + "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + +-e|--edit:: + With this option, `git-revert` will let you edit the commit + message prior to committing the revert. This is the default if + you run the command from a terminal. + +-m parent-number|--mainline parent-number:: + Usually you cannot revert a merge because you do not know which + side of the merge should be considered the mainline. This + option specifies the parent number (starting from 1) of + the mainline and allows revert to reverse the change + relative to the specified parent. + +--no-edit:: + With this option, `git-revert` will not start the commit + message editor. + +-n|--no-commit:: + Usually the command automatically creates a commit with + a commit log message stating which commit was reverted. + This flag applies the change necessary to revert the + named commit to your working tree, but does not make the + commit. In addition, when this option is used, your + working tree does not have to match the HEAD commit. + The revert is done against the beginning state of your + working tree. ++ +This is useful when reverting more than one commits' +effect to your working tree in a row. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-rm.txt b/Documentation/git-rm.txt new file mode 100644 index 0000000..dc36c66 --- /dev/null +++ b/Documentation/git-rm.txt @@ -0,0 +1,98 @@ +git-rm(1) +========= + +NAME +---- +git-rm - Remove files from the working tree and from the index + +SYNOPSIS +-------- +'git-rm' [-f] [-n] [-r] [--cached] [--ignore-unmatch] [--quiet] [--] <file>... + +DESCRIPTION +----------- +Remove files from the working tree and from the index. The +files have to be identical to the tip of the branch, and no +updates to its contents must have been placed in the staging +area (aka index). When --cached is given, the staged content has to +match either the tip of the branch *or* the file on disk. + + +OPTIONS +------- +<file>...:: + Files to remove. Fileglobs (e.g. `*.c`) can be given to + remove all matching files. Also a leading directory name + (e.g. `dir` to add `dir/file1` and `dir/file2`) can be + given to remove all files in the directory, recursively, + but this requires `-r` option to be given for safety. + +-f:: + Override the up-to-date check. + +-n, \--dry-run:: + Don't actually remove the file(s), just show if they exist in + the index. + +-r:: + Allow recursive removal when a leading directory name is + given. + +\--:: + This option can be used to separate command-line options from + the list of files, (useful when filenames might be mistaken + for command-line options). + +\--cached:: + This option can be used to tell the command to remove + the paths only from the index, leaving working tree + files. + +\--ignore-unmatch:: + Exit with a zero status even if no files matched. + +-q, \--quiet:: + git-rm normally outputs one line (in the form of an "rm" command) + for each file removed. This option suppresses that output. + + +DISCUSSION +---------- + +The list of <file> given to the command can be exact pathnames, +file glob patterns, or leading directory name. The command +removes only the paths that is known to git. Giving the name of +a file that you have not told git about does not remove that file. + + +EXAMPLES +-------- +git-rm Documentation/\\*.txt:: + Removes all `\*.txt` files from the index that are under the + `Documentation` directory and any of its subdirectories. ++ +Note that the asterisk `\*` is quoted from the shell in this +example; this lets the command include the files from +subdirectories of `Documentation/` directory. + +git-rm -f git-*.sh:: + Remove all git-*.sh scripts that are in the index. + Because this example lets the shell expand the asterisk + (i.e. you are listing the files explicitly), it + does not remove `subdir/git-foo.sh`. + +See Also +-------- +linkgit:git-add[1] + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt new file mode 100644 index 0000000..0554f2b --- /dev/null +++ b/Documentation/git-send-email.txt @@ -0,0 +1,201 @@ +git-send-email(1) +================= + +NAME +---- +git-send-email - Send a collection of patches as emails + + +SYNOPSIS +-------- +'git-send-email' [options] <file|directory> [... file|directory] + + + +DESCRIPTION +----------- +Takes the patches given on the command line and emails them out. + +The header of the email is configurable by command line options. If not +specified on the command line, the user will be prompted with a ReadLine +enabled interface to provide the necessary information. + +OPTIONS +------- +The options available are: + +--bcc:: + Specify a "Bcc:" value for each email. ++ +The --bcc option must be repeated for each user you want on the bcc list. + +--cc:: + Specify a starting "Cc:" value for each email. ++ +The --cc option must be repeated for each user you want on the cc list. + +--cc-cmd:: + Specify a command to execute once per patch file which + should generate patch file specific "Cc:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.cccmd' configuration value. + +--chain-reply-to, --no-chain-reply-to:: + If this is set, each email will be sent as a reply to the previous + email sent. If disabled with "--no-chain-reply-to", all emails after + the first will be sent as replies to the first email sent. When using + this, it is recommended that the first file given be an overview of the + entire patch series. + Default is the value of the 'sendemail.chainreplyto' configuration + value; if that is unspecified, default to --chain-reply-to. + +--compose:: + Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an + introductory message for the patch series. + +--from:: + Specify the sender of the emails. This will default to + the value GIT_COMMITTER_IDENT, as returned by "git-var -l". + The user will still be prompted to confirm this entry. + +--in-reply-to:: + Specify the contents of the first In-Reply-To header. + Subsequent emails will refer to the previous email + instead of this if --chain-reply-to is set (the default) + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. + +--signed-off-by-cc, --no-signed-off-by-cc:: + If this is set, add emails found in Signed-off-by: or Cc: lines to the + cc list. + Default is the value of 'sendemail.signedoffcc' configuration value; + if that is unspecified, default to --signed-off-by-cc. + +--quiet:: + Make git-send-email less verbose. One line per email should be + all that is output. + +--identity:: + A configuration identity. When given, causes values in the + 'sendemail.<identity>' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of 'sendemail.identity'. + +--smtp-server:: + If set, specifies the outgoing SMTP server to use (e.g. + `smtp.example.com` or a raw IP address). Alternatively it can + specify a full pathname of a sendmail-like program instead; + the program must support the `-i` option. Default value can + be specified by the 'sendemail.smtpserver' configuration + option; the built-in default is `/usr/sbin/sendmail` or + `/usr/lib/sendmail` if such program is available, or + `localhost` otherwise. + +--smtp-server-port:: + Specifies a port different from the default port (SMTP + servers typically listen to smtp port 25 and ssmtp port + 465). + +--smtp-user, --smtp-pass:: + Username and password for SMTP-AUTH. Defaults are the values of + the configuration values 'sendemail.smtpuser' and + 'sendemail.smtppass', but see also 'sendemail.identity'. + If not set, authentication is not attempted. + +--smtp-ssl:: + If set, connects to the SMTP server using SSL. + Default is the value of the 'sendemail.smtpssl' configuration value; + if that is unspecified, does not use SSL. + +--subject:: + Specify the initial subject of the email thread. + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. + +--suppress-from, --no-suppress-from:: + If this is set, do not add the From: address to the cc: list. + Default is the value of 'sendemail.suppressfrom' configuration value; + if that is unspecified, default to --no-suppress-from. + +--thread, --no-thread:: + If this is set, the In-Reply-To header will be set on each email sent. + If disabled with "--no-thread", no emails will have the In-Reply-To + header set. + Default is the value of the 'sendemail.thread' configuration value; + if that is unspecified, default to --thread. + +--dry-run:: + Do everything except actually send the emails. + +--envelope-sender:: + Specify the envelope sender used to send the emails. + This is useful if your default address is not the address that is + subscribed to a list. If you use the sendmail binary, you must have + suitable privileges for the -f parameter. + +--to:: + Specify the primary recipient of the emails generated. + Generally, this will be the upstream maintainer of the + project involved. + Default is the value of the 'sendemail.to' configuration value; + if that is unspecified, this will be prompted for. ++ +The --to option must be repeated for each user you want on the to list. + + +CONFIGURATION +------------- +sendemail.identity:: + The default configuration identity. When specified, + 'sendemail.<identity>.<item>' will have higher precedence than + 'sendemail.<item>'. This is useful to declare multiple SMTP + identities and to hoist sensitive authentication information + out of the repository and into the global configuration file. + +sendemail.aliasesfile:: + To avoid typing long email addresses, point this to one or more + email aliases files. You must also supply 'sendemail.aliasfiletype'. + +sendemail.aliasfiletype:: + Format of the file(s) specified in sendemail.aliasesfile. Must be + one of 'mutt', 'mailrc', 'pine', or 'gnus'. + +sendemail.to:: + Email address (or alias) to always send to. + +sendemail.cccmd:: + Command to execute to generate per patch file specific "Cc:"s. + +sendemail.bcc:: + Email address (or alias) to always bcc. + +sendemail.chainreplyto:: + Boolean value specifying the default to the '--chain_reply_to' + parameter. + +sendemail.smtpserver:: + Default SMTP server to use. + +sendemail.smtpuser:: + Default SMTP-AUTH username. + +sendemail.smtppass:: + Default SMTP-AUTH password. + +sendemail.smtpssl:: + Boolean value specifying the default to the '--smtp-ssl' parameter. + +Author +------ +Written by Ryan Anderson <ryan@michonline.com> + +git-send-email is originally based upon +send_lots_of_email.pl by Greg Kroah-Hartman. + +Documentation +-------------- +Documentation by Ryan Anderson + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt new file mode 100644 index 0000000..777515b --- /dev/null +++ b/Documentation/git-send-pack.txt @@ -0,0 +1,128 @@ +git-send-pack(1) +================ + +NAME +---- +git-send-pack - Push objects over git protocol to another repository + + +SYNOPSIS +-------- +'git-send-pack' [--all] [--dry-run] [--force] [--receive-pack=<git-receive-pack>] [--verbose] [--thin] [<host>:]<directory> [<ref>...] + +DESCRIPTION +----------- +Usually you would want to use linkgit:git-push[1] which is a +higher level wrapper of this command instead. + +Invokes 'git-receive-pack' on a possibly remote repository, and +updates it from the current repository, sending named refs. + + +OPTIONS +------- +\--receive-pack=<git-receive-pack>:: + Path to the 'git-receive-pack' program on the remote + end. Sometimes useful when pushing to a remote + repository over ssh, and you do not have the program in + a directory on the default $PATH. + +\--exec=<git-receive-pack>:: + Same as \--receive-pack=<git-receive-pack>. + +\--all:: + Instead of explicitly specifying which refs to update, + update all heads that locally exist. + +\--dry-run:: + Do everything except actually send the updates. + +\--force:: + Usually, the command refuses to update a remote ref that + is not an ancestor of the local ref used to overwrite it. + This flag disables the check. What this means is that + the remote repository can lose commits; use it with + care. + +\--verbose:: + Run verbosely. + +\--thin:: + Spend extra cycles to minimize the number of objects to be sent. + Use it on slower connection. + +<host>:: + A remote host to house the repository. When this + part is specified, 'git-receive-pack' is invoked via + ssh. + +<directory>:: + The repository to update. + +<ref>...:: + The remote refs to update. + + +Specifying the Refs +------------------- + +There are three ways to specify which refs to update on the +remote end. + +With '--all' flag, all refs that exist locally are transferred to +the remote side. You cannot specify any '<ref>' if you use +this flag. + +Without '--all' and without any '<ref>', the heads that exist +both on the local side and on the remote side are updated. + +When one or more '<ref>' are specified explicitly, it can be either a +single pattern, or a pair of such pattern separated by a colon +":" (this means that a ref name cannot have a colon in it). A +single pattern '<name>' is just a shorthand for '<name>:<name>'. + +Each pattern pair consists of the source side (before the colon) +and the destination side (after the colon). The ref to be +pushed is determined by finding a match that matches the source +side, and where it is pushed is determined by using the +destination side. The rules used to match a ref are the same +rules used by linkgit:git-rev-parse[1] to resolve a symbolic ref +name. + + - It is an error if <src> does not match exactly one of the + local refs. + + - It is an error if <dst> matches more than one remote refs. + + - If <dst> does not match any remote ref, either + + * it has to start with "refs/"; <dst> is used as the + destination literally in this case. + + * <src> == <dst> and the ref that matched the <src> must not + exist in the set of remote refs; the ref matched <src> + locally is used as the name of the destination. + +Without '--force', the <src> ref is stored at the remote only if +<dst> does not exist, or <dst> is a proper subset (i.e. an +ancestor) of <src>. This check, known as "fast forward check", +is performed in order to avoid accidentally overwriting the +remote ref and lose other peoples' commits from there. + +With '--force', the fast forward check is disabled for all refs. + +Optionally, a <ref> parameter can be prefixed with a plus '+' sign +to disable the fast-forward check only on that ref. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt new file mode 100644 index 0000000..16b8b75 --- /dev/null +++ b/Documentation/git-sh-setup.txt @@ -0,0 +1,80 @@ +git-sh-setup(1) +=============== + +NAME +---- +git-sh-setup - Common git shell script setup code + +SYNOPSIS +-------- +'git-sh-setup' + +DESCRIPTION +----------- + +This is not a command the end user would want to run. Ever. +This documentation is meant for people who are studying the +Porcelain-ish scripts and/or are writing new ones. + +The `git-sh-setup` scriptlet is designed to be sourced (using +`.`) by other shell scripts to set up some variables pointing at +the normal git directories and a few helper shell functions. + +Before sourcing it, your script should set up a few variables; +`USAGE` (and `LONG_USAGE`, if any) is used to define message +given by `usage()` shell function. `SUBDIRECTORY_OK` can be set +if the script can run from a subdirectory of the working tree +(some commands do not). + +The scriptlet sets `GIT_DIR` and `GIT_OBJECT_DIRECTORY` shell +variables, but does *not* export them to the environment. + +FUNCTIONS +--------- + +die:: + exit after emitting the supplied error message to the + standard error stream. + +usage:: + die with the usage message. + +set_reflog_action:: + set the message that will be recorded to describe the + end-user action in the reflog, when the script updates a + ref. + +git_editor:: + runs an editor of user's choice (GIT_EDITOR, core.editor, VISUAL or + EDITOR) on a given file, but error out if no editor is specified + and the terminal is dumb. + +is_bare_repository:: + outputs `true` or `false` to the standard output stream + to indicate if the repository is a bare repository + (i.e. without an associated working tree). + +cd_to_toplevel:: + runs chdir to the toplevel of the working tree. + +require_work_tree:: + checks if the repository is a bare repository, and dies + if so. Used by scripts that require working tree + (e.g. `checkout`). + +get_author_ident_from_commit:: + outputs code for use with eval to set the GIT_AUTHOR_NAME, + GIT_AUTHOR_EMAIL and GIT_AUTHOR_DATE variables for a given commit. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt new file mode 100644 index 0000000..bc031e0 --- /dev/null +++ b/Documentation/git-shell.txt @@ -0,0 +1,34 @@ +git-shell(1) +============ + +NAME +---- +git-shell - Restricted login shell for GIT-only SSH access + + +SYNOPSIS +-------- +'git-shell' -c <command> <argument> + +DESCRIPTION +----------- +This is meant to be used as a login shell for SSH accounts you want +to restrict to GIT pull/push access only. It permits execution only +of server-side GIT commands implementing the pull/push functionality. +The commands can be executed only by the '-c' option; the shell is not +interactive. + +Currently, only the `git-receive-pack` and `git-upload-pack` commands +are permitted to be called, with a single required argument. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Petr Baudis and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt new file mode 100644 index 0000000..c775257 --- /dev/null +++ b/Documentation/git-shortlog.txt @@ -0,0 +1,62 @@ +git-shortlog(1) +=============== + +NAME +---- +git-shortlog - Summarize 'git log' output + +SYNOPSIS +-------- +[verse] +git-log --pretty=short | 'git-shortlog' [-h] [-n] [-s] [-e] +git-shortlog [-n|--numbered] [-s|--summary] [-e|--email] [<committish>...] + +DESCRIPTION +----------- +Summarizes 'git log' output in a format suitable for inclusion +in release announcements. Each commit will be grouped by author and +the first line of the commit message will be shown. + +Additionally, "[PATCH]" will be stripped from the commit description. + +OPTIONS +------- + +-h, \--help:: + Print a short usage message and exit. + +-n, \--numbered:: + Sort output according to the number of commits per author instead + of author alphabetic order. + +-s, \--summary:: + Suppress commit description and provide a commit count summary only. + +-e, \--email:: + Show the email address of each author. + +FILES +----- + +If the file `.mailmap` exists, it will be used for mapping author +email addresses to a real author name. One mapping per line, first +the author name followed by the email address enclosed by +'<' and '>'. Use hash '#' for comments. Example: + +------------ +# Keep alphabetized +Adam Morrow <adam@localhost.localdomain> +Eve Jones <eve@laptop.(none)> +------------ + +Author +------ +Written by Jeff Garzik <jgarzik@pobox.com> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt new file mode 100644 index 0000000..0bb8250 --- /dev/null +++ b/Documentation/git-show-branch.txt @@ -0,0 +1,193 @@ +git-show-branch(1) +================== + +NAME +---- +git-show-branch - Show branches and their commits + +SYNOPSIS +-------- +[verse] +'git-show-branch' [--all] [--remotes] [--topo-order] [--current] + [--more=<n> | --list | --independent | --merge-base] + [--no-name | --sha1-name] [--topics] [<rev> | <glob>]... +'git-show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>] + +DESCRIPTION +----------- + +Shows the commit ancestry graph starting from the commits named +with <rev>s or <globs>s (or all refs under $GIT_DIR/refs/heads +and/or $GIT_DIR/refs/tags) semi-visually. + +It cannot show more than 29 branches and commits at a time. + +It uses `showbranch.default` multi-valued configuration items if +no <rev> nor <glob> is given on the command line. + + +OPTIONS +------- +<rev>:: + Arbitrary extended SHA1 expression (see `git-rev-parse`) + that typically names a branch HEAD or a tag. + +<glob>:: + A glob pattern that matches branch or tag names under + $GIT_DIR/refs. For example, if you have many topic + branches under $GIT_DIR/refs/heads/topic, giving + `topic/*` would show all of them. + +-r|--remotes:: + Show the remote-tracking branches. + +-a|--all:: + Show both remote-tracking branches and local branches. + +--current:: + With this option, the command includes the current + branch to the list of revs to be shown when it is not + given on the command line. + +--topo-order:: + By default, the branches and their commits are shown in + reverse chronological order. This option makes them + appear in topological order (i.e., descendant commits + are shown before their parents). + +--sparse:: + By default, the output omits merges that are reachable + from only one tip being shown. This option makes them + visible. + +--more=<n>:: + Usually the command stops output upon showing the commit + that is the common ancestor of all the branches. This + flag tells the command to go <n> more common commits + beyond that. When <n> is negative, display only the + <reference>s given, without showing the commit ancestry + tree. + +--list:: + Synonym to `--more=-1` + +--merge-base:: + Instead of showing the commit list, just act like the + 'git-merge-base -a' command, except that it can accept + more than two heads. + +--independent:: + Among the <reference>s given, display only the ones that + cannot be reached from any other <reference>. + +--no-name:: + Do not show naming strings for each commit. + +--sha1-name:: + Instead of naming the commits using the path to reach + them from heads (e.g. "master~2" to mean the grandparent + of "master"), name them with the unique prefix of their + object names. + +--topics:: + Shows only commits that are NOT on the first branch given. + This helps track topic branches by hiding any commit that + is already in the main line of development. When given + "git show-branch --topics master topic1 topic2", this + will show the revisions given by "git rev-list {caret}master + topic1 topic2" + +--reflog[=<n>[,<base>]] [<ref>]:: + Shows <n> most recent ref-log entries for the given + ref. If <base> is given, <n> entries going back from + that entry. <base> can be specified as count or date. + `-g` can be used as a short-hand for this option. When + no explicit <ref> parameter is given, it defaults to the + current branch (or `HEAD` if it is detached). + +Note that --more, --list, --independent and --merge-base options +are mutually exclusive. + + +OUTPUT +------ +Given N <references>, the first N lines are the one-line +description from their commit message. The branch head that is +pointed at by $GIT_DIR/HEAD is prefixed with an asterisk `*` +character while other heads are prefixed with a `!` character. + +Following these N lines, one-line log for each commit is +displayed, indented N places. If a commit is on the I-th +branch, the I-th indentation character shows a `+` sign; +otherwise it shows a space. Merge commits are denoted by +a `-` sign. Each commit shows a short name that +can be used as an extended SHA1 to name that commit. + +The following example shows three branches, "master", "fixes" +and "mhf": + +------------------------------------------------ +$ git show-branch master fixes mhf +* [master] Add 'git show-branch'. + ! [fixes] Introduce "reset type" flag to "git reset" + ! [mhf] Allow "+remote:local" refspec to cause --force when fetching. +--- + + [mhf] Allow "+remote:local" refspec to cause --force when fetching. + + [mhf~1] Use git-octopus when pulling more than one heads. + + [fixes] Introduce "reset type" flag to "git reset" + + [mhf~2] "git fetch --force". + + [mhf~3] Use .git/remote/origin, not .git/branches/origin. + + [mhf~4] Make "git pull" and "git fetch" default to origin + + [mhf~5] Infamous 'octopus merge' + + [mhf~6] Retire git-parse-remote. + + [mhf~7] Multi-head fetch. + + [mhf~8] Start adding the $GIT_DIR/remotes/ support. +*++ [master] Add 'git show-branch'. +------------------------------------------------ + +These three branches all forked from a common commit, [master], +whose commit message is "Add 'git show-branch'. "fixes" branch +adds one commit 'Introduce "reset type"'. "mhf" branch has many +other commits. The current branch is "master". + + +EXAMPLE +------- + +If you keep your primary branches immediately under +`$GIT_DIR/refs/heads`, and topic branches in subdirectories of +it, having the following in the configuration file may help: + +------------ +[showbranch] + default = --topo-order + default = heads/* + +------------ + +With this, `git show-branch` without extra parameters would show +only the primary branches. In addition, if you happen to be on +your topic branch, it is shown as well. + +------------ +$ git show-branch --reflog='10,1 hour ago' --list master +------------ + +shows 10 reflog entries going back from the tip as of 1 hour ago. +Without `--list`, the output also shows how these tips are +topologically related with each other. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + + +Documentation +-------------- +Documentation by Junio C Hamano. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-show-index.txt b/Documentation/git-show-index.txt new file mode 100644 index 0000000..535a884 --- /dev/null +++ b/Documentation/git-show-index.txt @@ -0,0 +1,34 @@ +git-show-index(1) +================= + +NAME +---- +git-show-index - Show packed archive index + + +SYNOPSIS +-------- +'git-show-index' < idx-file + + +DESCRIPTION +----------- +Reads given idx file for packed git archive created with +git-pack-objects command, and dumps its contents. + +The information it outputs is subset of what you can get from +'git-verify-pack -v'; this command only shows the packfile +offset and SHA1 of each object. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt new file mode 100644 index 0000000..ce0e643 --- /dev/null +++ b/Documentation/git-show-ref.txt @@ -0,0 +1,172 @@ +git-show-ref(1) +=============== + +NAME +---- +git-show-ref - List references in a local repository + +SYNOPSIS +-------- +[verse] +'git-show-ref' [-q|--quiet] [--verify] [-h|--head] [-d|--dereference] + [-s|--hash] [--abbrev] [--tags] [--heads] [--] <pattern>... +'git-show-ref' --exclude-existing[=pattern] + +DESCRIPTION +----------- + +Displays references available in a local repository along with the associated +commit IDs. Results can be filtered using a pattern and tags can be +dereferenced into object IDs. Additionally, it can be used to test whether a +particular ref exists. + +The --exclude-existing form is a filter that does the inverse, it shows the +refs from stdin that don't exist in the local repository. + +Use of this utility is encouraged in favor of directly accessing files under +in the `.git` directory. + +OPTIONS +------- + +-h, --head:: + + Show the HEAD reference. + +--tags, --heads:: + + Limit to only "refs/heads" and "refs/tags", respectively. These + options are not mutually exclusive; when given both, references stored + in "refs/heads" and "refs/tags" are displayed. + +-d, --dereference:: + + Dereference tags into object IDs as well. They will be shown with "^{}" + appended. + +-s, --hash:: + + Only show the SHA1 hash, not the reference name. When also using + --dereference the dereferenced tag will still be shown after the SHA1. + +--verify:: + + Enable stricter reference checking by requiring an exact ref path. + Aside from returning an error code of 1, it will also print an error + message if '--quiet' was not specified. + +--abbrev, --abbrev=len:: + + Abbreviate the object name. When using `--hash`, you do + not have to say `--hash --abbrev`; `--hash=len` would do. + +-q, --quiet:: + + Do not print any results to stdout. When combined with '--verify' this + can be used to silently check if a reference exists. + +--exclude-existing, --exclude-existing=pattern:: + + Make git-show-ref act as a filter that reads refs from stdin of the + form "^(?:<anything>\s)?<refname>(?:\^\{\})?$" and performs the + following actions on each: + (1) strip "^{}" at the end of line if any; + (2) ignore if pattern is provided and does not head-match refname; + (3) warn if refname is not a well-formed refname and skip; + (4) ignore if refname is a ref that exists in the local repository; + (5) otherwise output the line. + + +<pattern>:: + + Show references matching one or more patterns. + +OUTPUT +------ + +The output is in the format: '<SHA-1 ID>' '<space>' '<reference name>'. + +----------------------------------------------------------------------------- +$ git show-ref --head --dereference +832e76a9899f560a90ffd62ae2ce83bbeff58f54 HEAD +832e76a9899f560a90ffd62ae2ce83bbeff58f54 refs/heads/master +832e76a9899f560a90ffd62ae2ce83bbeff58f54 refs/heads/origin +3521017556c5de4159da4615a39fa4d5d2c279b5 refs/tags/v0.99.9c +6ddc0964034342519a87fe013781abf31c6db6ad refs/tags/v0.99.9c^{} +055e4ae3ae6eb344cbabf2a5256a49ea66040131 refs/tags/v1.0rc4 +423325a2d24638ddcc82ce47be5e40be550f4507 refs/tags/v1.0rc4^{} +... +----------------------------------------------------------------------------- + +When using --hash (and not --dereference) the output format is: '<SHA-1 ID>' + +----------------------------------------------------------------------------- +$ git show-ref --heads --hash +2e3ba0114a1f52b47df29743d6915d056be13278 +185008ae97960c8d551adcd9e23565194651b5d1 +03adf42c988195b50e1a1935ba5fcbc39b2b029b +... +----------------------------------------------------------------------------- + +EXAMPLE +------- + +To show all references called "master", whether tags or heads or anything +else, and regardless of how deep in the reference naming hierarchy they are, +use: + +----------------------------------------------------------------------------- + git show-ref master +----------------------------------------------------------------------------- + +This will show "refs/heads/master" but also "refs/remote/other-repo/master", +if such references exists. + +When using the '--verify' flag, the command requires an exact path: + +----------------------------------------------------------------------------- + git show-ref --verify refs/heads/master +----------------------------------------------------------------------------- + +will only match the exact branch called "master". + +If nothing matches, linkgit:git-show-ref[1] will return an error code of 1, +and in the case of verification, it will show an error message. + +For scripting, you can ask it to be quiet with the "--quiet" flag, which +allows you to do things like + +----------------------------------------------------------------------------- + git-show-ref --quiet --verify -- "refs/heads/$headname" || + echo "$headname is not a valid branch" +----------------------------------------------------------------------------- + +to check whether a particular branch exists or not (notice how we don't +actually want to show any results, and we want to use the full refname for it +in order to not trigger the problem with ambiguous partial matches). + +To show only tags, or only proper branch heads, use "--tags" and/or "--heads" +respectively (using both means that it shows tags and heads, but not other +random references under the refs/ subdirectory). + +To do automatic tag object dereferencing, use the "-d" or "--dereference" +flag, so you can do + +----------------------------------------------------------------------------- + git show-ref --tags --dereference +----------------------------------------------------------------------------- + +to get a listing of all tags together with what they dereference. + +SEE ALSO +-------- +linkgit:git-ls-remote[1] + +AUTHORS +------- +Written by Linus Torvalds <torvalds@osdl.org>. +Man page by Jonas Fonseca <fonseca@diku.dk>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-show.txt b/Documentation/git-show.txt new file mode 100644 index 0000000..dccf0e2 --- /dev/null +++ b/Documentation/git-show.txt @@ -0,0 +1,86 @@ +git-show(1) +=========== + +NAME +---- +git-show - Show various types of objects + + +SYNOPSIS +-------- +'git-show' [options] <object>... + +DESCRIPTION +----------- +Shows one or more objects (blobs, trees, tags and commits). + +For commits it shows the log message and textual diff. It also +presents the merge commit in a special format as produced by +'git-diff-tree --cc'. + +For tags, it shows the tag message and the referenced objects. + +For trees, it shows the names (equivalent to linkgit:git-ls-tree[1] +with \--name-only). + +For plain blobs, it shows the plain contents. + +The command takes options applicable to the linkgit:git-diff-tree[1] command to +control how the changes the commit introduces are shown. + +This manual page describes only the most frequently used options. + + +OPTIONS +------- +<object>:: + The name of the object to show. + For a more complete list of ways to spell object names, see + "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + +include::pretty-options.txt[] + + +include::pretty-formats.txt[] + + +EXAMPLES +-------- + +git show v1.0.0:: + Shows the tag `v1.0.0`, along with the object the tags + points at. + +git show v1.0.0^\{tree\}:: + Shows the tree pointed to by the tag `v1.0.0`. + +git show next~10:Documentation/README:: + Shows the contents of the file `Documentation/README` as + they were current in the 10th last commit of the branch + `next`. + +git show master:Makefile master:t/Makefile:: + Concatenates the contents of said Makefiles in the head + of the branch `master`. + +Discussion +---------- + +include::i18n.txt[] + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net>. Significantly enhanced by +Johannes Schindelin <Johannes.Schindelin@gmx.de>. + + +Documentation +------------- +Documentation by David Greaves, Petr Baudis and the git-list <git@vger.kernel.org>. + +This manual page is a stub. You can help the git documentation by expanding it. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt new file mode 100644 index 0000000..48e6f5a --- /dev/null +++ b/Documentation/git-stash.txt @@ -0,0 +1,174 @@ +git-stash(1) +============ + +NAME +---- +git-stash - Stash the changes in a dirty working directory away + +SYNOPSIS +-------- +[verse] +'git-stash' (list | show [<stash>] | apply [<stash>] | clear) +'git-stash' [save [<message>]] + +DESCRIPTION +----------- + +Use 'git-stash' when you want to record the current state of the +working directory and the index, but want to go back to a clean +working directory. The command saves your local modifications away +and reverts the working directory to match the `HEAD` commit. + +The modifications stashed away by this command can be listed with +`git-stash list`, inspected with `git-stash show`, and restored +(potentially on top of a different commit) with `git-stash apply`. +Calling git-stash without any arguments is equivalent to `git-stash +save`. A stash is by default listed as "WIP on 'branchname' ...", but +you can give a more descriptive message on the command line when +you create one. + +The latest stash you created is stored in `$GIT_DIR/refs/stash`; older +stashes are found in the reflog of this reference and can be named using +the usual reflog syntax (e.g. `stash@\{0}` is the most recently +created stash, `stash@\{1}` is the one before it, `stash@\{2.hours.ago}` +is also possible). + +OPTIONS +------- + +save [<message>]:: + + Save your local modifications to a new 'stash', and run `git-reset + --hard` to revert them. This is the default action when no + subcommand is given. The <message> part is optional and gives + the description along with the stashed state. + +list [<options>]:: + + List the stashes that you currently have. Each 'stash' is listed + with its name (e.g. `stash@\{0}` is the latest stash, `stash@\{1}` is + the one before, etc.), the name of the branch that was current when the + stash was made, and a short description of the commit the stash was + based on. ++ +---------------------------------------------------------------- +stash@{0}: WIP on submit: 6ebd0e2... Update git-stash documentation +stash@{1}: On master: 9cc0589... Add git-stash +---------------------------------------------------------------- ++ +The command takes options applicable to the linkgit:git-log[1] +command to control what is shown and how. + +show [<stash>]:: + + Show the changes recorded in the stash as a diff between the + stashed state and its original parent. When no `<stash>` is given, + shows the latest one. By default, the command shows the diffstat, but + it will accept any format known to `git-diff` (e.g., `git-stash show + -p stash@\{1}` to view the second most recent stash in patch form). + +apply [--index] [<stash>]:: + + Restore the changes recorded in the stash on top of the current + working tree state. When no `<stash>` is given, applies the latest + one. The working directory must match the index. ++ +This operation can fail with conflicts; you need to resolve them +by hand in the working tree. ++ +If the `--index` option is used, then tries to reinstate not only the working +tree's changes, but also the index's ones. However, this can fail, when you +have conflicts (which are stored in the index, where you therefore can no +longer apply the changes as they were originally). + +clear:: + Remove all the stashed states. Note that those states will then + be subject to pruning, and may be difficult or impossible to recover. + + +DISCUSSION +---------- + +A stash is represented as a commit whose tree records the state of the +working directory, and its first parent is the commit at `HEAD` when +the stash was created. The tree of the second parent records the +state of the index when the stash is made, and it is made a child of +the `HEAD` commit. The ancestry graph looks like this: + + .----W + / / + -----H----I + +where `H` is the `HEAD` commit, `I` is a commit that records the state +of the index, and `W` is a commit that records the state of the working +tree. + + +EXAMPLES +-------- + +Pulling into a dirty tree:: + +When you are in the middle of something, you learn that there are +upstream changes that are possibly relevant to what you are +doing. When your local changes do not conflict with the changes in +the upstream, a simple `git pull` will let you move forward. ++ +However, there are cases in which your local changes do conflict with +the upstream changes, and `git pull` refuses to overwrite your +changes. In such a case, you can stash your changes away, +perform a pull, and then unstash, like this: ++ +---------------------------------------------------------------- +$ git pull +... +file foobar not up to date, cannot merge. +$ git stash +$ git pull +$ git stash apply +---------------------------------------------------------------- + +Interrupted workflow:: + +When you are in the middle of something, your boss comes in and +demands that you fix something immediately. Traditionally, you would +make a commit to a temporary branch to store your changes away, and +return to your original branch to make the emergency fix, like this: ++ +---------------------------------------------------------------- +... hack hack hack ... +$ git checkout -b my_wip +$ git commit -a -m "WIP" +$ git checkout master +$ edit emergency fix +$ git commit -a -m "Fix in a hurry" +$ git checkout my_wip +$ git reset --soft HEAD^ +... continue hacking ... +---------------------------------------------------------------- ++ +You can use `git-stash` to simplify the above, like this: ++ +---------------------------------------------------------------- +... hack hack hack ... +$ git stash +$ edit emergency fix +$ git commit -a -m "Fix in a hurry" +$ git stash apply +... continue hacking ... +---------------------------------------------------------------- + +SEE ALSO +-------- +linkgit:git-checkout[1], +linkgit:git-commit[1], +linkgit:git-reflog[1], +linkgit:git-reset[1] + +AUTHOR +------ +Written by Nanako Shiraishi <nanako3@bluebottle.com> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt new file mode 100644 index 0000000..3ea269a --- /dev/null +++ b/Documentation/git-status.txt @@ -0,0 +1,70 @@ +git-status(1) +============= + +NAME +---- +git-status - Show the working tree status + + +SYNOPSIS +-------- +'git-status' <options>... + +DESCRIPTION +----------- +Displays paths that have differences between the index file and the +current HEAD commit, paths that have differences between the working +tree and the index file, and paths in the working tree that are not +tracked by git (and are not ignored by linkgit:gitignore[5]). The first +are what you _would_ commit by running `git commit`; the second and +third are what you _could_ commit by running `git add` before running +`git commit`. + +The command takes the same set of options as `git-commit`; it +shows what would be committed if the same options are given to +`git-commit`. + +If there is no path that is different between the index file and +the current HEAD commit (i.e., there is nothing to commit by running +`git-commit`), the command exits with non-zero status. + + +OUTPUT +------ +The output from this command is designed to be used as a commit +template comment, and all the output lines are prefixed with '#'. + +The paths mentioned in the output, unlike many other git commands, are +made relative to the current directory if you are working in a +subdirectory (this is on purpose, to help cutting and pasting). See +the status.relativePaths config option below. + + +CONFIGURATION +------------- + +The command honors `color.status` (or `status.color` -- they +mean the same thing and the latter is kept for backward +compatibility) and `color.status.<slot>` configuration variables +to colorize its output. + +If the config variable `status.relativePaths` is set to false, then all +paths shown are relative to the repository root, not to the current +directory. + +See Also +-------- +linkgit:gitignore[5] + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net>. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-stripspace.txt b/Documentation/git-stripspace.txt new file mode 100644 index 0000000..fc56875 --- /dev/null +++ b/Documentation/git-stripspace.txt @@ -0,0 +1,35 @@ +git-stripspace(1) +================= + +NAME +---- +git-stripspace - Filter out empty lines + + +SYNOPSIS +-------- +'git-stripspace' [-s | --strip-comments] < <stream> + +DESCRIPTION +----------- +Remove multiple empty lines, and empty lines at beginning and end. + +OPTIONS +------- +-s|--strip-comments:: + In addition to empty lines, also strip lines starting with '#'. + +<stream>:: + Byte stream to act on. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt new file mode 100644 index 0000000..e818e6e --- /dev/null +++ b/Documentation/git-submodule.txt @@ -0,0 +1,82 @@ +git-submodule(1) +================ + +NAME +---- +git-submodule - Initialize, update or inspect submodules + + +SYNOPSIS +-------- +[verse] +'git-submodule' [--quiet] add [-b branch] [--] <repository> [<path>] +'git-submodule' [--quiet] status [--cached] [--] [<path>...] +'git-submodule' [--quiet] [init|update] [--] [<path>...] + + +COMMANDS +-------- +add:: + Add the given repository as a submodule at the given path + to the changeset to be committed next. In particular, the + repository is cloned at the specified path, added to the + changeset and registered in .gitmodules. If no path is + specified, the path is deduced from the repository specification. + If the repository url begins with ./ or ../, it is stored as + given but resolved as a relative path from the main project's + url when cloning. + +status:: + Show the status of the submodules. This will print the SHA-1 of the + currently checked out commit for each submodule, along with the + submodule path and the output of linkgit:git-describe[1] for the + SHA-1. Each SHA-1 will be prefixed with `-` if the submodule is not + initialized and `+` if the currently checked out submodule commit + does not match the SHA-1 found in the index of the containing + repository. This command is the default command for git-submodule. + +init:: + Initialize the submodules, i.e. register in .git/config each submodule + name and url found in .gitmodules. The key used in .git/config is + `submodule.$name.url`. This command does not alter existing information + in .git/config. + +update:: + Update the registered submodules, i.e. clone missing submodules and + checkout the commit specified in the index of the containing repository. + This will make the submodules HEAD be detached. + + +OPTIONS +------- +-q, --quiet:: + Only print error messages. + +-b, --branch:: + Branch of repository to add as submodule. + +--cached:: + Display the SHA-1 stored in the index, not the SHA-1 of the currently + checked out submodule commit. This option is only valid for the + status command. + +<path>:: + Path to submodule(s). When specified this will restrict the command + to only operate on the submodules found at the specified paths. + +FILES +----- +When initializing submodules, a .gitmodules file in the top-level directory +of the containing repository is used to find the url of each submodule. +This file should be formatted in the same way as `$GIT_DIR/config`. The key +to each submodule url is "submodule.$name.url". See linkgit:gitmodules[5] +for details. + + +AUTHOR +------ +Written by Lars Hjemli <hjemli@gmail.com> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt new file mode 100644 index 0000000..115b8be --- /dev/null +++ b/Documentation/git-svn.txt @@ -0,0 +1,583 @@ +git-svn(1) +========== + +NAME +---- +git-svn - Bidirectional operation between a single Subversion branch and git + +SYNOPSIS +-------- +'git-svn' <command> [options] [arguments] + +DESCRIPTION +----------- +git-svn is a simple conduit for changesets between Subversion and git. +It is not to be confused with linkgit:git-svnimport[1], which is +read-only. + +git-svn was originally designed for an individual developer who wants a +bidirectional flow of changesets between a single branch in Subversion +and an arbitrary number of branches in git. Since its inception, +git-svn has gained the ability to track multiple branches in a manner +similar to git-svnimport. + +git-svn is especially useful when it comes to tracking repositories +not organized in the way Subversion developers recommend (trunk, +branches, tags directories). + +COMMANDS +-------- +-- + +'init':: + Initializes an empty git repository with additional + metadata directories for git-svn. The Subversion URL + may be specified as a command-line argument, or as full + URL arguments to -T/-t/-b. Optionally, the target + directory to operate on can be specified as a second + argument. Normally this command initializes the current + directory. + +-T<trunk_subdir>;; +--trunk=<trunk_subdir>;; +-t<tags_subdir>;; +--tags=<tags_subdir>;; +-b<branches_subdir>;; +--branches=<branches_subdir>;; +-s;; +--stdlayout;; + These are optional command-line options for init. Each of + these flags can point to a relative repository path + (--tags=project/tags') or a full url + (--tags=https://foo.org/project/tags). The option --stdlayout is + a shorthand way of setting trunk,tags,branches as the relative paths, + which is the Subversion default. If any of the other options are given + as well, they take precedence. +--no-metadata;; + Set the 'noMetadata' option in the [svn-remote] config. +--use-svm-props;; + Set the 'useSvmProps' option in the [svn-remote] config. +--use-svnsync-props;; + Set the 'useSvnsyncProps' option in the [svn-remote] config. +--rewrite-root=<URL>;; + Set the 'rewriteRoot' option in the [svn-remote] config. +--username=<USER>;; + For transports that SVN handles authentication for (http, + https, and plain svn), specify the username. For other + transports (eg svn+ssh://), you must include the username in + the URL, eg svn+ssh://foo@svn.bar.com/project +--prefix=<prefix>;; + This allows one to specify a prefix which is prepended + to the names of remotes if trunk/branches/tags are + specified. The prefix does not automatically include a + trailing slash, so be sure you include one in the + argument if that is what you want. If --branches/-b is + specified, the prefix must include a trailing slash. + Setting a prefix is useful if you wish to track multiple + projects that share a common repository. + +'fetch':: + Fetch unfetched revisions from the Subversion remote we are + tracking. The name of the [svn-remote "..."] section in the + .git/config file may be specified as an optional command-line + argument. + +'clone':: + Runs 'init' and 'fetch'. It will automatically create a + directory based on the basename of the URL passed to it; + or if a second argument is passed; it will create a directory + and work within that. It accepts all arguments that the + 'init' and 'fetch' commands accept; with the exception of + '--fetch-all'. After a repository is cloned, the 'fetch' + command will be able to update revisions without affecting + the working tree; and the 'rebase' command will be able + to update the working tree with the latest changes. + +'rebase':: + This fetches revisions from the SVN parent of the current HEAD + and rebases the current (uncommitted to SVN) work against it. + +This works similarly to 'svn update' or 'git-pull' except that +it preserves linear history with 'git-rebase' instead of +'git-merge' for ease of dcommiting with git-svn. + +This accepts all options that 'git-svn fetch' and 'git-rebase' +accepts. However '--fetch-all' only fetches from the current +[svn-remote], and not all [svn-remote] definitions. + +Like 'git-rebase'; this requires that the working tree be clean +and have no uncommitted changes. + +-l;; +--local;; + Do not fetch remotely; only run 'git-rebase' against the + last fetched commit from the upstream SVN. + +'dcommit':: + Commit each diff from a specified head directly to the SVN + repository, and then rebase or reset (depending on whether or + not there is a diff between SVN and head). This will create + a revision in SVN for each commit in git. + It is recommended that you run git-svn fetch and rebase (not + pull or merge) your commits against the latest changes in the + SVN repository. + An optional command-line argument may be specified as an + alternative to HEAD. + This is advantageous over 'set-tree' (below) because it produces + cleaner, more linear history. ++ +--no-rebase;; + After committing, do not rebase or reset. +-- + +'log':: + This should make it easy to look up svn log messages when svn + users refer to -r/--revision numbers. ++ +The following features from `svn log' are supported: ++ +-- +--revision=<n>[:<n>];; + is supported, non-numeric args are not: + HEAD, NEXT, BASE, PREV, etc ... +-v/--verbose;; + it's not completely compatible with the --verbose + output in svn log, but reasonably close. +--limit=<n>;; + is NOT the same as --max-count, doesn't count + merged/excluded commits +--incremental;; + supported +-- ++ +New features: ++ +-- +--show-commit;; + shows the git commit sha1, as well +--oneline;; + our version of --pretty=oneline +-- ++ +NOTE: SVN itself only stores times in UTC and nothing else. The regular svn +client converts the UTC time to the local time (or based on the TZ= +environment). This command has the same behaviour. ++ +Any other arguments are passed directly to `git log' + +-- +'find-rev':: + When given an SVN revision number of the form 'rN', returns the + corresponding git commit hash (this can optionally be followed by a + tree-ish to specify which branch should be searched). When given a + tree-ish, returns the corresponding SVN revision number. + +'set-tree':: + You should consider using 'dcommit' instead of this command. + Commit specified commit or tree objects to SVN. This relies on + your imported fetch data being up-to-date. This makes + absolutely no attempts to do patching when committing to SVN, it + simply overwrites files with those specified in the tree or + commit. All merging is assumed to have taken place + independently of git-svn functions. + +'show-ignore':: + Recursively finds and lists the svn:ignore property on + directories. The output is suitable for appending to + the $GIT_DIR/info/exclude file. + +'commit-diff':: + Commits the diff of two tree-ish arguments from the + command-line. This command is intended for interoperability with + git-svnimport and does not rely on being inside an git-svn + init-ed repository. This command takes three arguments, (a) the + original tree to diff against, (b) the new tree result, (c) the + URL of the target Subversion repository. The final argument + (URL) may be omitted if you are working from a git-svn-aware + repository (that has been init-ed with git-svn). + The -r<revision> option is required for this. + +'info':: + Shows information about a file or directory similar to what + `svn info' provides. Does not currently support a -r/--revision + argument. Use the --url option to output only the value of the + 'URL:' field. + +-- + +OPTIONS +------- +-- + +--shared[={false|true|umask|group|all|world|everybody}]:: +--template=<template_directory>:: + Only used with the 'init' command. + These are passed directly to linkgit:git-init[1]. + +-r <ARG>:: +--revision <ARG>:: + +Used with the 'fetch' command. + +This allows revision ranges for partial/cauterized history +to be supported. $NUMBER, $NUMBER1:$NUMBER2 (numeric ranges), +$NUMBER:HEAD, and BASE:$NUMBER are all supported. + +This can allow you to make partial mirrors when running fetch; +but is generally not recommended because history will be skipped +and lost. + +-:: +--stdin:: + +Only used with the 'set-tree' command. + +Read a list of commits from stdin and commit them in reverse +order. Only the leading sha1 is read from each line, so +git-rev-list --pretty=oneline output can be used. + +--rmdir:: + +Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. + +Remove directories from the SVN tree if there are no files left +behind. SVN can version empty directories, and they are not +removed by default if there are no files left in them. git +cannot version empty directories. Enabling this flag will make +the commit to SVN act like git. + +config key: svn.rmdir + +-e:: +--edit:: + +Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. + +Edit the commit message before committing to SVN. This is off by +default for objects that are commits, and forced on when committing +tree objects. + +config key: svn.edit + +-l<num>:: +--find-copies-harder:: + +Only used with the 'dcommit', 'set-tree' and 'commit-diff' commands. + +They are both passed directly to git-diff-tree see +linkgit:git-diff-tree[1] for more information. + +[verse] +config key: svn.l +config key: svn.findcopiesharder + +-A<filename>:: +--authors-file=<filename>:: + +Syntax is compatible with the files used by git-svnimport and +git-cvsimport: + +------------------------------------------------------------------------ + loginname = Joe User <user@example.com> +------------------------------------------------------------------------ + +If this option is specified and git-svn encounters an SVN +committer name that does not exist in the authors-file, git-svn +will abort operation. The user will then have to add the +appropriate entry. Re-running the previous git-svn command +after the authors-file is modified should continue operation. + +config key: svn.authorsfile + +-q:: +--quiet:: + Make git-svn less verbose. + +--repack[=<n>]:: +--repack-flags=<flags>:: + +These should help keep disk usage sane for large fetches +with many revisions. + +--repack takes an optional argument for the number of revisions +to fetch before repacking. This defaults to repacking every +1000 commits fetched if no argument is specified. + +--repack-flags are passed directly to linkgit:git-repack[1]. + +[verse] +config key: svn.repack +config key: svn.repackflags + +-m:: +--merge:: +-s<strategy>:: +--strategy=<strategy>:: + +These are only used with the 'dcommit' and 'rebase' commands. + +Passed directly to git-rebase when using 'dcommit' if a +'git-reset' cannot be used (see dcommit). + +-n:: +--dry-run:: + +This is only used with the 'dcommit' command. + +Print out the series of git arguments that would show +which diffs would be committed to SVN. + +-- + +ADVANCED OPTIONS +---------------- +-- + +-i<GIT_SVN_ID>:: +--id <GIT_SVN_ID>:: + +This sets GIT_SVN_ID (instead of using the environment). This +allows the user to override the default refname to fetch from +when tracking a single URL. The 'log' and 'dcommit' commands +no longer require this switch as an argument. + +-R<remote name>:: +--svn-remote <remote name>:: + Specify the [svn-remote "<remote name>"] section to use, + this allows SVN multiple repositories to be tracked. + Default: "svn" + +--follow-parent:: + This is especially helpful when we're tracking a directory + that has been moved around within the repository, or if we + started tracking a branch and never tracked the trunk it was + descended from. This feature is enabled by default, use + --no-follow-parent to disable it. + +config key: svn.followparent + +-- +CONFIG FILE-ONLY OPTIONS +------------------------ +-- + +svn.noMetadata:: +svn-remote.<name>.noMetadata:: + +This gets rid of the git-svn-id: lines at the end of every commit. + +If you lose your .git/svn/git-svn/.rev_db file, git-svn will not +be able to rebuild it and you won't be able to fetch again, +either. This is fine for one-shot imports. + +The 'git-svn log' command will not work on repositories using +this, either. Using this conflicts with the 'useSvmProps' +option for (hopefully) obvious reasons. + +svn.useSvmProps:: +svn-remote.<name>.useSvmProps:: + +This allows git-svn to re-map repository URLs and UUIDs from +mirrors created using SVN::Mirror (or svk) for metadata. + +If an SVN revision has a property, "svm:headrev", it is likely +that the revision was created by SVN::Mirror (also used by SVK). +The property contains a repository UUID and a revision. We want +to make it look like we are mirroring the original URL, so +introduce a helper function that returns the original identity +URL and UUID, and use it when generating metadata in commit +messages. + +svn.useSvnsyncProps:: +svn-remote.<name>.useSvnsyncprops:: + Similar to the useSvmProps option; this is for users + of the svnsync(1) command distributed with SVN 1.4.x and + later. + +svn-remote.<name>.rewriteRoot:: + This allows users to create repositories from alternate + URLs. For example, an administrator could run git-svn on the + server locally (accessing via file://) but wish to distribute + the repository with a public http:// or svn:// URL in the + metadata so users of it will see the public URL. + +Since the noMetadata, rewriteRoot, useSvnsyncProps and useSvmProps +options all affect the metadata generated and used by git-svn; they +*must* be set in the configuration file before any history is imported +and these settings should never be changed once they are set. + +Additionally, only one of these four options can be used per-svn-remote +section because they affect the 'git-svn-id:' metadata line. + +-- + +BASIC EXAMPLES +-------------- + +Tracking and contributing to the trunk of a Subversion-managed project: + +------------------------------------------------------------------------ +# Clone a repo (like git clone): + git-svn clone http://svn.foo.org/project/trunk +# Enter the newly cloned directory: + cd trunk +# You should be on master branch, double-check with git-branch + git branch +# Do some work and commit locally to git: + git commit ... +# Something is committed to SVN, rebase your local changes against the +# latest changes in SVN: + git-svn rebase +# Now commit your changes (that were committed previously using git) to SVN, +# as well as automatically updating your working HEAD: + git-svn dcommit +# Append svn:ignore settings to the default git exclude file: + git-svn show-ignore >> .git/info/exclude +------------------------------------------------------------------------ + +Tracking and contributing to an entire Subversion-managed project +(complete with a trunk, tags and branches): + +------------------------------------------------------------------------ +# Clone a repo (like git clone): + git-svn clone http://svn.foo.org/project -T trunk -b branches -t tags +# View all branches and tags you have cloned: + git branch -r +# Reset your master to trunk (or any other branch, replacing 'trunk' +# with the appropriate name): + git reset --hard remotes/trunk +# You may only dcommit to one branch/tag/trunk at a time. The usage +# of dcommit/rebase/show-ignore should be the same as above. +------------------------------------------------------------------------ + +The initial 'git-svn clone' can be quite time-consuming +(especially for large Subversion repositories). If multiple +people (or one person with multiple machines) want to use +git-svn to interact with the same Subversion repository, you can +do the initial 'git-svn clone' to a repository on a server and +have each person clone that repository with 'git clone': + +------------------------------------------------------------------------ +# Do the initial import on a server + ssh server "cd /pub && git-svn clone http://svn.foo.org/project +# Clone locally - make sure the refs/remotes/ space matches the server + mkdir project + cd project + git-init + git remote add origin server:/pub/project + git config --add remote.origin.fetch=+refs/remotes/*:refs/remotes/* + git fetch +# Initialize git-svn locally (be sure to use the same URL and -T/-b/-t options as were used on server) + git-svn init http://svn.foo.org/project +# Pull the latest changes from Subversion + git-svn rebase +------------------------------------------------------------------------ + +REBASE VS. PULL/MERGE +--------------------- + +Originally, git-svn recommended that the remotes/git-svn branch be +pulled or merged from. This is because the author favored +'git-svn set-tree B' to commit a single head rather than the +'git-svn set-tree A..B' notation to commit multiple commits. + +If you use 'git-svn set-tree A..B' to commit several diffs and you do +not have the latest remotes/git-svn merged into my-branch, you should +use 'git-svn rebase' to update your work branch instead of 'git pull' or +'git merge'. 'pull/merge' can cause non-linear history to be flattened +when committing into SVN, which can lead to merge commits reversing +previous commits in SVN. + +DESIGN PHILOSOPHY +----------------- +Merge tracking in Subversion is lacking and doing branched development +with Subversion can be cumbersome as a result. While git-svn can track +copy history (including branches and tags) for repositories adopting a +standard layout, it cannot yet represent merge history that happened +inside git back upstream to SVN users. Therefore it is advised that +users keep history as linear as possible inside git to ease +compatibility with SVN (see the CAVEATS section below). + +CAVEATS +------- + +For the sake of simplicity and interoperating with a less-capable system +(SVN), it is recommended that all git-svn users clone, fetch and dcommit +directly from the SVN server, and avoid all git-clone/pull/merge/push +operations between git repositories and branches. The recommended +method of exchanging code between git branches and users is +git-format-patch and git-am, or just dcommiting to the SVN repository. + +Running 'git-merge' or 'git-pull' is NOT recommended on a branch you +plan to dcommit from. Subversion does not represent merges in any +reasonable or useful fashion; so users using Subversion cannot see any +merges you've made. Furthermore, if you merge or pull from a git branch +that is a mirror of an SVN branch, dcommit may commit to the wrong +branch. + +'git-clone' does not clone branches under the refs/remotes/ hierarchy or +any git-svn metadata, or config. So repositories created and managed with +using git-svn should use rsync(1) for cloning, if cloning is to be done +at all. + +Since 'dcommit' uses rebase internally, any git branches you git-push to +before dcommit on will require forcing an overwrite of the existing ref +on the remote repository. This is generally considered bad practice, +see the git-push(1) documentation for details. + +Do not use the --amend option of git-commit(1) on a change you've +already dcommitted. It is considered bad practice to --amend commits +you've already pushed to a remote repository for other users, and +dcommit with SVN is analogous to that. + +BUGS +---- + +We ignore all SVN properties except svn:executable. Any unhandled +properties are logged to $GIT_DIR/svn/<refname>/unhandled.log + +Renamed and copied directories are not detected by git and hence not +tracked when committing to SVN. I do not plan on adding support for +this as it's quite difficult and time-consuming to get working for all +the possible corner cases (git doesn't do it, either). Committing +renamed and copied files are fully supported if they're similar enough +for git to detect them. + +CONFIGURATION +------------- + +git-svn stores [svn-remote] configuration information in the +repository .git/config file. It is similar the core git +[remote] sections except 'fetch' keys do not accept glob +arguments; but they are instead handled by the 'branches' +and 'tags' keys. Since some SVN repositories are oddly +configured with multiple projects glob expansions such those +listed below are allowed: + +------------------------------------------------------------------------ +[svn-remote "project-a"] + url = http://server.org/svn + branches = branches/*/project-a:refs/remotes/project-a/branches/* + tags = tags/*/project-a:refs/remotes/project-a/tags/* + trunk = trunk/project-a:refs/remotes/project-a/trunk +------------------------------------------------------------------------ + +Keep in mind that the '*' (asterisk) wildcard of the local ref +(right of the ':') *must* be the farthest right path component; +however the remote wildcard may be anywhere as long as it's own +independent path component (surrounded by '/' or EOL). This +type of configuration is not automatically created by 'init' and +should be manually entered with a text-editor or using +linkgit:git-config[1] + +SEE ALSO +-------- +linkgit:git-rebase[1] + +Author +------ +Written by Eric Wong <normalperson@yhbt.net>. + +Documentation +------------- +Written by Eric Wong <normalperson@yhbt.net>. diff --git a/Documentation/git-symbolic-ref.txt b/Documentation/git-symbolic-ref.txt new file mode 100644 index 0000000..a5b40f3 --- /dev/null +++ b/Documentation/git-symbolic-ref.txt @@ -0,0 +1,61 @@ +git-symbolic-ref(1) +=================== + +NAME +---- +git-symbolic-ref - Read and modify symbolic refs + +SYNOPSIS +-------- +'git-symbolic-ref' [-q] [-m <reason>] <name> [<ref>] + +DESCRIPTION +----------- +Given one argument, reads which branch head the given symbolic +ref refers to and outputs its path, relative to the `.git/` +directory. Typically you would give `HEAD` as the <name> +argument to see on which branch your working tree is on. + +Give two arguments, create or update a symbolic ref <name> to +point at the given branch <ref>. + +A symbolic ref is a regular file that stores a string that +begins with `ref: refs/`. For example, your `.git/HEAD` is +a regular file whose contents is `ref: refs/heads/master`. + +OPTIONS +------- + +-q, --quiet:: + Do not issue an error message if the <name> is not a + symbolic ref but a detached HEAD; instead exit with + non-zero status silently. + +-m:: + Update the reflog for <name> with <reason>. This is valid only + when creating or updating a symbolic ref. + +NOTES +----- +In the past, `.git/HEAD` was a symbolic link pointing at +`refs/heads/master`. When we wanted to switch to another branch, +we did `ln -sf refs/heads/newbranch .git/HEAD`, and when we wanted +to find out which branch we are on, we did `readlink .git/HEAD`. +This was fine, and internally that is what still happens by +default, but on platforms that do not have working symlinks, +or that do not have the `readlink(1)` command, this was a bit +cumbersome. On some platforms, `ln -sf` does not even work as +advertised (horrors). Therefore symbolic links are now deprecated +and symbolic refs are used by default. + +git-symbolic-ref will exit with status 0 if the contents of the +symbolic ref were printed correctly, with status 1 if the requested +name is not a symbolic ref, or 128 if another error occurs. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt new file mode 100644 index 0000000..b62a3d1 --- /dev/null +++ b/Documentation/git-tag.txt @@ -0,0 +1,251 @@ +git-tag(1) +========== + +NAME +---- +git-tag - Create, list, delete or verify a tag object signed with GPG + + +SYNOPSIS +-------- +[verse] +'git-tag' [-a | -s | -u <key-id>] [-f] [-m <msg> | -F <file>] <name> [<head>] +'git-tag' -d <name>... +'git-tag' [-n [<num>]] -l [<pattern>] +'git-tag' -v <name>... + +DESCRIPTION +----------- +Adds a 'tag' reference in `.git/refs/tags/` + +Unless `-f` is given, the tag must not yet exist in +`.git/refs/tags/` directory. + +If one of `-a`, `-s`, or `-u <key-id>` is passed, the command +creates a 'tag' object, and requires the tag message. Unless +`-m <msg>` or `-F <file>` is given, an editor is started for the user to type +in the tag message. + +Otherwise just the SHA1 object name of the commit object is +written (i.e. a lightweight tag). + +A GnuPG signed tag object will be created when `-s` or `-u +<key-id>` is used. When `-u <key-id>` is not used, the +committer identity for the current user is used to find the +GnuPG key for signing. + +OPTIONS +------- +-a:: + Make an unsigned, annotated tag object + +-s:: + Make a GPG-signed tag, using the default e-mail address's key + +-u <key-id>:: + Make a GPG-signed tag, using the given key + +-f:: + Replace an existing tag with the given name (instead of failing) + +-d:: + Delete existing tags with the given names. + +-v:: + Verify the gpg signature of the given tag names. + +-n <num>:: + <num> specifies how many lines from the annotation, if any, + are printed when using -l. + The default is not to print any annotation lines. + If no number is given to `-n`, only the first line is printed. + +-l <pattern>:: + List tags with names that match the given pattern (or all if no pattern is given). + Typing "git tag" without arguments, also lists all tags. + +-m <msg>:: + Use the given tag message (instead of prompting). + If multiple `-m` options are given, there values are + concatenated as separate paragraphs. + +-F <file>:: + Take the tag message from the given file. Use '-' to + read the message from the standard input. + +CONFIGURATION +------------- +By default, git-tag in sign-with-default mode (-s) will use your +committer identity (of the form "Your Name <your@email.address>") to +find a key. If you want to use a different default key, you can specify +it in the repository configuration as follows: + +------------------------------------- +[user] + signingkey = <gpg-key-id> +------------------------------------- + + +DISCUSSION +---------- + +On Re-tagging +~~~~~~~~~~~~~ + +What should you do when you tag a wrong commit and you would +want to re-tag? + +If you never pushed anything out, just re-tag it. Use "-f" to +replace the old one. And you're done. + +But if you have pushed things out (or others could just read +your repository directly), then others will have already seen +the old tag. In that case you can do one of two things: + +. The sane thing. +Just admit you screwed up, and use a different name. Others have +already seen one tag-name, and if you keep the same name, you +may be in the situation that two people both have "version X", +but they actually have 'different' "X"'s. So just call it "X.1" +and be done with it. + +. The insane thing. +You really want to call the new version "X" too, 'even though' +others have already seen the old one. So just use "git tag -f" +again, as if you hadn't already published the old one. + +However, Git does *not* (and it should not) change tags behind +users back. So if somebody already got the old tag, doing a "git +pull" on your tree shouldn't just make them overwrite the old +one. + +If somebody got a release tag from you, you cannot just change +the tag for them by updating your own one. This is a big +security issue, in that people MUST be able to trust their +tag-names. If you really want to do the insane thing, you need +to just fess up to it, and tell people that you messed up. You +can do that by making a very public announcement saying: + +------------ +Ok, I messed up, and I pushed out an earlier version tagged as X. I +then fixed something, and retagged the *fixed* tree as X again. + +If you got the wrong tag, and want the new one, please delete +the old one and fetch the new one by doing: + + git tag -d X + git fetch origin tag X + +to get my updated tag. + +You can test which tag you have by doing + + git rev-parse X + +which should return 0123456789abcdef.. if you have the new version. + +Sorry for inconvenience. +------------ + +Does this seem a bit complicated? It *should* be. There is no +way that it would be correct to just "fix" it behind peoples +backs. People need to know that their tags might have been +changed. + + +On Automatic following +~~~~~~~~~~~~~~~~~~~~~~ + +If you are following somebody else's tree, you are most likely +using tracking branches (`refs/heads/origin` in traditional +layout, or `refs/remotes/origin/master` in the separate-remote +layout). You usually want the tags from the other end. + +On the other hand, if you are fetching because you would want a +one-shot merge from somebody else, you typically do not want to +get tags from there. This happens more often for people near +the toplevel but not limited to them. Mere mortals when pulling +from each other do not necessarily want to automatically get +private anchor point tags from the other person. + +You would notice "please pull" messages on the mailing list says +repo URL and branch name alone. This is designed to be easily +cut&pasted to "git fetch" command line: + +------------ +Linus, please pull from + + git://git..../proj.git master + +to get the following updates... +------------ + +becomes: + +------------ +$ git pull git://git..../proj.git master +------------ + +In such a case, you do not want to automatically follow other's +tags. + +One important aspect of git is it is distributed, and being +distributed largely means there is no inherent "upstream" or +"downstream" in the system. On the face of it, the above +example might seem to indicate that the tag namespace is owned +by upper echelon of people and tags only flow downwards, but +that is not the case. It only shows that the usage pattern +determines who are interested in whose tags. + +A one-shot pull is a sign that a commit history is now crossing +the boundary between one circle of people (e.g. "people who are +primarily interested in networking part of the kernel") who may +have their own set of tags (e.g. "this is the third release +candidate from the networking group to be proposed for general +consumption with 2.6.21 release") to another circle of people +(e.g. "people who integrate various subsystem improvements"). +The latter are usually not interested in the detailed tags used +internally in the former group (that is what "internal" means). +That is why it is desirable not to follow tags automatically in +this case. + +It may well be that among networking people, they may want to +exchange the tags internal to their group, but in that workflow +they are most likely tracking with each other's progress by +having tracking branches. Again, the heuristic to automatically +follow such tags is a good thing. + + +On Backdating Tags +~~~~~~~~~~~~~~~~~~ + +If you have imported some changes from another VCS and would like +to add tags for major releases of your work, it is useful to be able +to specify the date to embed inside of the tag object. The data in +the tag object affects, for example, the ordering of tags in the +gitweb interface. + +To set the date used in future tag objects, set the environment +variable GIT_AUTHOR_DATE to one or more of the date and time. The +date and time can be specified in a number of ways; the most common +is "YYYY-MM-DD HH:MM". + +An example follows. + +------------ +$ GIT_AUTHOR_DATE="2006-10-02 10:31" git tag -s v1.0.1 +------------ + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org>, +Junio C Hamano <junkio@cox.net> and Chris Wright <chrisw@osdl.org>. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt new file mode 100644 index 0000000..65c6817 --- /dev/null +++ b/Documentation/git-tar-tree.txt @@ -0,0 +1,89 @@ +git-tar-tree(1) +=============== + +NAME +---- +git-tar-tree - Create a tar archive of the files in the named tree object + + +SYNOPSIS +-------- +'git-tar-tree' [--remote=<repo>] <tree-ish> [ <base> ] + +DESCRIPTION +----------- +THIS COMMAND IS DEPRECATED. Use `git-archive` with `--format=tar` +option instead (and move the <base> argument to `--prefix=base/`). + +Creates a tar archive containing the tree structure for the named tree. +When <base> is specified it is added as a leading path to the files in the +generated tar archive. + +git-tar-tree behaves differently when given a tree ID versus when given +a commit ID or tag ID. In the first case the current time is used as +modification time of each file in the archive. In the latter case the +commit time as recorded in the referenced commit object is used instead. +Additionally the commit ID is stored in a global extended pax header. +It can be extracted using git-get-tar-commit-id. + +OPTIONS +------- + +<tree-ish>:: + The tree or commit to produce tar archive for. If it is + the object name of a commit object. + +<base>:: + Leading path to the files in the resulting tar archive. + +--remote=<repo>:: + Instead of making a tar archive from local repository, + retrieve a tar archive from a remote repository. + +CONFIGURATION +------------- + +tar.umask:: + This variable can be used to restrict the permission bits of + tar archive entries. The default is 0002, which turns off the + world write bit. The special value "user" indicates that the + archiving user's umask will be used instead. See umask(2) for + details. + +EXAMPLES +-------- +git tar-tree HEAD junk | (cd /var/tmp/ && tar xf -):: + + Create a tar archive that contains the contents of the + latest commit on the current branch, and extracts it in + `/var/tmp/junk` directory. + +git tar-tree v1.4.0 git-1.4.0 | gzip >git-1.4.0.tar.gz:: + + Create a tarball for v1.4.0 release. + +git tar-tree v1.4.0{caret}\{tree\} git-1.4.0 | gzip >git-1.4.0.tar.gz:: + + Create a tarball for v1.4.0 release, but without a + global extended pax header. + +git tar-tree --remote=example.com:git.git v1.4.0 >git-1.4.0.tar:: + + Get a tarball v1.4.0 from example.com. + +git tar-tree HEAD:Documentation/ git-docs > git-1.4.0-docs.tar:: + + Put everything in the current head's Documentation/ directory + into 'git-1.4.0-docs.tar', with the prefix 'git-docs/'. + +Author +------ +Written by Rene Scharfe. + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-tools.txt b/Documentation/git-tools.txt new file mode 100644 index 0000000..a96403c --- /dev/null +++ b/Documentation/git-tools.txt @@ -0,0 +1,118 @@ +A short git tools survey +======================== + + +Introduction +------------ + +Apart from git contrib/ area there are some others third-party tools +you may want to look. + +This document presents a brief summary of each tool and the corresponding +link. + + +Alternative/Augmentative Porcelains +----------------------------------- + + - *Cogito* (http://www.kernel.org/pub/software/scm/cogito/) + + Cogito is a version control system layered on top of the git tree history + storage system. It aims at seamless user interface and ease of use, + providing generally smoother user experience than the "raw" Core GIT + itself and indeed many other version control systems. + + Cogito is no longer maintained as most of its functionality + is now in core GIT. + + + - *pg* (http://www.spearce.org/category/projects/scm/pg/) + + pg is a shell script wrapper around GIT to help the user manage a set of + patches to files. pg is somewhat like quilt or StGIT, but it does have a + slightly different feature set. + + + - *StGit* (http://www.procode.org/stgit/) + + Stacked GIT provides a quilt-like patch management functionality in the + GIT environment. You can easily manage your patches in the scope of GIT + until they get merged upstream. + + +History Viewers +--------------- + + - *gitk* (shipped with git-core) + + gitk is a simple Tk GUI for browsing history of GIT repositories easily. + + + - *gitview* (contrib/) + + gitview is a GTK based repository browser for git + + + - *gitweb* (shipped with git-core) + + GITweb provides full-fledged web interface for GIT repositories. + + + - *qgit* (http://digilander.libero.it/mcostalba/) + + QGit is a git/StGIT GUI viewer built on Qt/C++. QGit could be used + to browse history and directory tree, view annotated files, commit + changes cherry picking single files or applying patches. + Currently it is the fastest and most feature rich among the git + viewers and commit tools. + + - *tig* (http://jonas.nitro.dk/tig/) + + tig by Jonas Fonseca is a simple git repository browser + written using ncurses. Basically, it just acts as a front-end + for git-log and git-show/git-diff. Additionally, you can also + use it as a pager for git commands. + + +Foreign SCM interface +--------------------- + + - *git-svn* (shipped with git-core) + + git-svn is a simple conduit for changesets between a single Subversion + branch and git. + + + - *quilt2git / git2quilt* (http://home-tj.org/wiki/index.php/Misc) + + These utilities convert patch series in a quilt repository and commit + series in git back and forth. + + + - *hg-to-git* (contrib/) + + hg-to-git converts a Mercurial repository into a git one, and + preserves the full branch history in the process. hg-to-git can + also be used in an incremental way to keep the git repository + in sync with the master Mercurial repository. + + +Others +------ + + - *(h)gct* (http://www.cyd.liu.se/users/~freku045/gct/) + + Commit Tool or (h)gct is a GUI enabled commit tool for git and + Mercurial (hg). It allows the user to view diffs, select which files + to committed (or ignored / reverted) write commit messages and + perform the commit itself. + + - *git.el* (contrib/) + + This is an Emacs interface for git. The user interface is modeled on + pcl-cvs. It has been developed on Emacs 21 and will probably need some + tweaking to work on XEmacs. + + +http://git.or.cz/gitwiki/InterfacesFrontendsAndTools has more +comprehensive list. diff --git a/Documentation/git-unpack-file.txt b/Documentation/git-unpack-file.txt new file mode 100644 index 0000000..1864d13 --- /dev/null +++ b/Documentation/git-unpack-file.txt @@ -0,0 +1,35 @@ +git-unpack-file(1) +================== + +NAME +---- +git-unpack-file - Creates a temporary file with a blob's contents + + + +SYNOPSIS +-------- +'git-unpack-file' <blob> + +DESCRIPTION +----------- +Creates a file holding the contents of the blob specified by sha1. It +returns the name of the temporary file in the following format: + .merge_file_XXXXX + +OPTIONS +------- +<blob>:: + Must be a blob id + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt new file mode 100644 index 0000000..b79be3f --- /dev/null +++ b/Documentation/git-unpack-objects.txt @@ -0,0 +1,54 @@ +git-unpack-objects(1) +===================== + +NAME +---- +git-unpack-objects - Unpack objects from a packed archive + + +SYNOPSIS +-------- +'git-unpack-objects' [-n] [-q] [-r] <pack-file + + +DESCRIPTION +----------- +Read a packed archive (.pack) from the standard input, expanding +the objects contained within and writing them into the repository in +"loose" (one object per file) format. + +Objects that already exist in the repository will *not* be unpacked +from the pack-file. Therefore, nothing will be unpacked if you use +this command on a pack-file that exists within the target repository. + +Please see the `git-repack` documentation for options to generate +new packs and replace existing ones. + +OPTIONS +------- +-n:: + Dry run. Check the pack file without actually unpacking + the objects. + +-q:: + The command usually shows percentage progress. This + flag suppresses it. + +-r:: + When unpacking a corrupt packfile, the command dies at + the first corruption. This flag tells it to keep going + and make the best effort to recover as many objects as + possible. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +------------- +Documentation by Junio C Hamano + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt new file mode 100644 index 0000000..66be18e --- /dev/null +++ b/Documentation/git-update-index.txt @@ -0,0 +1,326 @@ +git-update-index(1) +=================== + +NAME +---- +git-update-index - Register file contents in the working tree to the index + + +SYNOPSIS +-------- +[verse] +'git-update-index' + [--add] [--remove | --force-remove] [--replace] + [--refresh] [-q] [--unmerged] [--ignore-missing] + [--cacheinfo <mode> <object> <file>]\* + [--chmod=(+|-)x] + [--assume-unchanged | --no-assume-unchanged] + [--really-refresh] [--unresolve] [--again | -g] + [--info-only] [--index-info] + [-z] [--stdin] + [--verbose] + [--] [<file>]\* + +DESCRIPTION +----------- +Modifies the index or directory cache. Each file mentioned is updated +into the index and any 'unmerged' or 'needs updating' state is +cleared. + +See also linkgit:git-add[1] for a more user-friendly way to do some of +the most common operations on the index. + +The way "git-update-index" handles files it is told about can be modified +using the various options: + +OPTIONS +------- +--add:: + If a specified file isn't in the index already then it's + added. + Default behaviour is to ignore new files. + +--remove:: + If a specified file is in the index but is missing then it's + removed. + Default behavior is to ignore removed file. + +--refresh:: + Looks at the current index and checks to see if merges or + updates are needed by checking stat() information. + +-q:: + Quiet. If --refresh finds that the index needs an update, the + default behavior is to error out. This option makes + git-update-index continue anyway. + +--unmerged:: + If --refresh finds unmerged changes in the index, the default + behavior is to error out. This option makes git-update-index + continue anyway. + +--ignore-missing:: + Ignores missing files during a --refresh + +--cacheinfo <mode> <object> <path>:: + Directly insert the specified info into the index. + +--index-info:: + Read index information from stdin. + +--chmod=(+|-)x:: + Set the execute permissions on the updated files. + +--assume-unchanged, --no-assume-unchanged:: + When these flags are specified, the object name recorded + for the paths are not updated. Instead, these options + sets and unsets the "assume unchanged" bit for the + paths. When the "assume unchanged" bit is on, git stops + checking the working tree files for possible + modifications, so you need to manually unset the bit to + tell git when you change the working tree file. This is + sometimes helpful when working with a big project on a + filesystem that has very slow lstat(2) system call + (e.g. cifs). + +--again, -g:: + Runs `git-update-index` itself on the paths whose index + entries are different from those from the `HEAD` commit. + +--unresolve:: + Restores the 'unmerged' or 'needs updating' state of a + file during a merge if it was cleared by accident. + +--info-only:: + Do not create objects in the object database for all + <file> arguments that follow this flag; just insert + their object IDs into the index. + +--force-remove:: + Remove the file from the index even when the working directory + still has such a file. (Implies --remove.) + +--replace:: + By default, when a file `path` exists in the index, + git-update-index refuses an attempt to add `path/file`. + Similarly if a file `path/file` exists, a file `path` + cannot be added. With --replace flag, existing entries + that conflicts with the entry being added are + automatically removed with warning messages. + +--stdin:: + Instead of taking list of paths from the command line, + read list of paths from the standard input. Paths are + separated by LF (i.e. one path per line) by default. + +--verbose:: + Report what is being added and removed from index. + +-z:: + Only meaningful with `--stdin`; paths are separated with + NUL character instead of LF. + +\--:: + Do not interpret any more arguments as options. + +<file>:: + Files to act on. + Note that files beginning with '.' are discarded. This includes + `./file` and `dir/./file`. If you don't want this, then use + cleaner names. + The same applies to directories ending '/' and paths with '//' + +Using --refresh +--------------- +'--refresh' does not calculate a new sha1 file or bring the index +up-to-date for mode/content changes. But what it *does* do is to +"re-match" the stat information of a file with the index, so that you +can refresh the index for a file that hasn't been changed but where +the stat entry is out of date. + +For example, you'd want to do this after doing a "git-read-tree", to link +up the stat index details with the proper files. + +Using --cacheinfo or --info-only +-------------------------------- +'--cacheinfo' is used to register a file that is not in the +current working directory. This is useful for minimum-checkout +merging. + +To pretend you have a file with mode and sha1 at path, say: + +---------------- +$ git-update-index --cacheinfo mode sha1 path +---------------- + +'--info-only' is used to register files without placing them in the object +database. This is useful for status-only repositories. + +Both '--cacheinfo' and '--info-only' behave similarly: the index is updated +but the object database isn't. '--cacheinfo' is useful when the object is +in the database but the file isn't available locally. '--info-only' is +useful when the file is available, but you do not wish to update the +object database. + + +Using --index-info +------------------ + +`--index-info` is a more powerful mechanism that lets you feed +multiple entry definitions from the standard input, and designed +specifically for scripts. It can take inputs of three formats: + + . mode SP sha1 TAB path ++ +The first format is what "git-apply --index-info" +reports, and used to reconstruct a partial tree +that is used for phony merge base tree when falling +back on 3-way merge. + + . mode SP type SP sha1 TAB path ++ +The second format is to stuff git-ls-tree output +into the index file. + + . mode SP sha1 SP stage TAB path ++ +This format is to put higher order stages into the +index file and matches git-ls-files --stage output. + +To place a higher stage entry to the index, the path should +first be removed by feeding a mode=0 entry for the path, and +then feeding necessary input lines in the third format. + +For example, starting with this index: + +------------ +$ git ls-files -s +100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz +------------ + +you can feed the following input to `--index-info`: + +------------ +$ git update-index --index-info +0 0000000000000000000000000000000000000000 frotz +100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz +100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz +------------ + +The first line of the input feeds 0 as the mode to remove the +path; the SHA1 does not matter as long as it is well formatted. +Then the second and third line feeds stage 1 and stage 2 entries +for that path. After the above, we would end up with this: + +------------ +$ git ls-files -s +100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz +100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz +------------ + + +Using ``assume unchanged'' bit +------------------------------ + +Many operations in git depend on your filesystem to have an +efficient `lstat(2)` implementation, so that `st_mtime` +information for working tree files can be cheaply checked to see +if the file contents have changed from the version recorded in +the index file. Unfortunately, some filesystems have +inefficient `lstat(2)`. If your filesystem is one of them, you +can set "assume unchanged" bit to paths you have not changed to +cause git not to do this check. Note that setting this bit on a +path does not mean git will check the contents of the file to +see if it has changed -- it makes git to omit any checking and +assume it has *not* changed. When you make changes to working +tree files, you have to explicitly tell git about it by dropping +"assume unchanged" bit, either before or after you modify them. + +In order to set "assume unchanged" bit, use `--assume-unchanged` +option. To unset, use `--no-assume-unchanged`. + +The command looks at `core.ignorestat` configuration variable. When +this is true, paths updated with `git-update-index paths...` and +paths updated with other git commands that update both index and +working tree (e.g. `git-apply --index`, `git-checkout-index -u`, +and `git-read-tree -u`) are automatically marked as "assume +unchanged". Note that "assume unchanged" bit is *not* set if +`git-update-index --refresh` finds the working tree file matches +the index (use `git-update-index --really-refresh` if you want +to mark them as "assume unchanged"). + + +Examples +-------- +To update and refresh only the files already checked out: + +---------------- +$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh +---------------- + +On an inefficient filesystem with `core.ignorestat` set:: ++ +------------ +$ git update-index --really-refresh <1> +$ git update-index --no-assume-unchanged foo.c <2> +$ git diff --name-only <3> +$ edit foo.c +$ git diff --name-only <4> +M foo.c +$ git update-index foo.c <5> +$ git diff --name-only <6> +$ edit foo.c +$ git diff --name-only <7> +$ git update-index --no-assume-unchanged foo.c <8> +$ git diff --name-only <9> +M foo.c +------------ ++ +<1> forces lstat(2) to set "assume unchanged" bits for paths that match index. +<2> mark the path to be edited. +<3> this does lstat(2) and finds index matches the path. +<4> this does lstat(2) and finds index does *not* match the path. +<5> registering the new version to index sets "assume unchanged" bit. +<6> and it is assumed unchanged. +<7> even after you edit it. +<8> you can tell about the change after the fact. +<9> now it checks with lstat(2) and finds it has been changed. + + +Configuration +------------- + +The command honors `core.filemode` configuration variable. If +your repository is on an filesystem whose executable bits are +unreliable, this should be set to 'false' (see linkgit:git-config[1]). +This causes the command to ignore differences in file modes recorded +in the index and the file mode on the filesystem if they differ only on +executable bit. On such an unfortunate filesystem, you may +need to use `git-update-index --chmod=`. + +Quite similarly, if `core.symlinks` configuration variable is set +to 'false' (see linkgit:git-config[1]), symbolic links are checked out +as plain files, and this command does not modify a recorded file mode +from symbolic link to regular file. + +The command looks at `core.ignorestat` configuration variable. See +'Using "assume unchanged" bit' section above. + + +See Also +-------- +linkgit:git-config[1], +linkgit:git-add[1] + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-update-ref.txt b/Documentation/git-update-ref.txt new file mode 100644 index 0000000..4dc4759 --- /dev/null +++ b/Documentation/git-update-ref.txt @@ -0,0 +1,93 @@ +git-update-ref(1) +================= + +NAME +---- +git-update-ref - Update the object name stored in a ref safely + +SYNOPSIS +-------- +'git-update-ref' [-m <reason>] (-d <ref> <oldvalue> | [--no-deref] <ref> <newvalue> [<oldvalue>]) + +DESCRIPTION +----------- +Given two arguments, stores the <newvalue> in the <ref>, possibly +dereferencing the symbolic refs. E.g. `git-update-ref HEAD +<newvalue>` updates the current branch head to the new object. + +Given three arguments, stores the <newvalue> in the <ref>, +possibly dereferencing the symbolic refs, after verifying that +the current value of the <ref> matches <oldvalue>. +E.g. `git-update-ref refs/heads/master <newvalue> <oldvalue>` +updates the master branch head to <newvalue> only if its current +value is <oldvalue>. You can specify 40 "0" or an empty string +as <oldvalue> to make sure that the ref you are creating does +not exist. + +It also allows a "ref" file to be a symbolic pointer to another +ref file by starting with the four-byte header sequence of +"ref:". + +More importantly, it allows the update of a ref file to follow +these symbolic pointers, whether they are symlinks or these +"regular file symbolic refs". It follows *real* symlinks only +if they start with "refs/": otherwise it will just try to read +them and update them as a regular file (i.e. it will allow the +filesystem to follow them, but will overwrite such a symlink to +somewhere else with a regular filename). + +If --no-deref is given, <ref> itself is overwritten, rather than +the result of following the symbolic pointers. + +In general, using + + git-update-ref HEAD "$head" + +should be a _lot_ safer than doing + + echo "$head" > "$GIT_DIR/HEAD" + +both from a symlink following standpoint *and* an error checking +standpoint. The "refs/" rule for symlinks means that symlinks +that point to "outside" the tree are safe: they'll be followed +for reading but not for writing (so we'll never write through a +ref symlink to some other tree, if you have copied a whole +archive by creating a symlink tree). + +With `-d` flag, it deletes the named <ref> after verifying it +still contains <oldvalue>. + + +Logging Updates +--------------- +If config parameter "core.logAllRefUpdates" is true or the file +"$GIT_DIR/logs/<ref>" exists then `git-update-ref` will append +a line to the log file "$GIT_DIR/logs/<ref>" (dereferencing all +symbolic refs before creating the log name) describing the change +in ref value. Log lines are formatted as: + + . oldsha1 SP newsha1 SP committer LF ++ +Where "oldsha1" is the 40 character hexadecimal value previously +stored in <ref>, "newsha1" is the 40 character hexadecimal value of +<newvalue> and "committer" is the committer's name, email address +and date in the standard GIT committer ident format. + +Optionally with -m: + + . oldsha1 SP newsha1 SP committer TAB message LF ++ +Where all fields are as described above and "message" is the +value supplied to the -m option. + +An update will fail (without changing <ref>) if the current user is +unable to create a new log file, append to the existing log file +or does not have committer information available. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt new file mode 100644 index 0000000..1cf89fd --- /dev/null +++ b/Documentation/git-update-server-info.txt @@ -0,0 +1,57 @@ +git-update-server-info(1) +========================= + +NAME +---- +git-update-server-info - Update auxiliary info file to help dumb servers + + +SYNOPSIS +-------- +'git-update-server-info' [--force] + +DESCRIPTION +----------- +A dumb server that does not do on-the-fly pack generations must +have some auxiliary information files in $GIT_DIR/info and +$GIT_OBJECT_DIRECTORY/info directories to help clients discover +what references and packs the server has. This command +generates such auxiliary files. + + +OPTIONS +------- + +-f|--force:: + Update the info files from scratch. + + +OUTPUT +------ + +Currently the command updates the following files. Please see +link:repository-layout.html[repository-layout] for description +of what they are for: + +* objects/info/packs + +* info/refs + + +BUGS +---- +When you remove an existing ref, the command fails to update +info/refs file unless `--force` flag is given. + + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-upload-archive.txt b/Documentation/git-upload-archive.txt new file mode 100644 index 0000000..c1ef144 --- /dev/null +++ b/Documentation/git-upload-archive.txt @@ -0,0 +1,37 @@ +git-upload-archive(1) +==================== + +NAME +---- +git-upload-archive - Send archive back to git-archive + + +SYNOPSIS +-------- +'git-upload-archive' <directory> + +DESCRIPTION +----------- +Invoked by 'git-archive --remote' and sends a generated archive to the +other end over the git protocol. + +This command is usually not invoked directly by the end user. The UI +for the protocol is on the 'git-archive' side, and the program pair +is meant to be used to get an archive from a remote repository. + +OPTIONS +------- +<directory>:: + The repository to get a tar archive from. + +Author +------ +Written by Franck Bui-Huu. + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt new file mode 100644 index 0000000..2330d13 --- /dev/null +++ b/Documentation/git-upload-pack.txt @@ -0,0 +1,46 @@ +git-upload-pack(1) +================== + +NAME +---- +git-upload-pack - Send objects packed back to git-fetch-pack + + +SYNOPSIS +-------- +'git-upload-pack' [--strict] [--timeout=<n>] <directory> + +DESCRIPTION +----------- +Invoked by 'git-fetch-pack', learns what +objects the other side is missing, and sends them after packing. + +This command is usually not invoked directly by the end user. +The UI for the protocol is on the 'git-fetch-pack' side, and the +program pair is meant to be used to pull updates from a remote +repository. For push operations, see 'git-send-pack'. + + +OPTIONS +------- + +\--strict:: + Do not try <directory>/.git/ if <directory> is no git directory. + +\--timeout=<n>:: + Interrupt transfer after <n> seconds of inactivity. + +<directory>:: + The repository to sync from. + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by Junio C Hamano. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt new file mode 100644 index 0000000..2980283 --- /dev/null +++ b/Documentation/git-var.txt @@ -0,0 +1,64 @@ +git-var(1) +========== + +NAME +---- +git-var - Show a git logical variable + + +SYNOPSIS +-------- +'git-var' [ -l | <variable> ] + +DESCRIPTION +----------- +Prints a git logical variable. + +OPTIONS +------- +-l:: + Cause the logical variables to be listed. In addition, all the + variables of the git configuration file .git/config are listed + as well. (However, the configuration variables listing functionality + is deprecated in favor of `git-config -l`.) + +EXAMPLE +-------- + $ git-var GIT_AUTHOR_IDENT + Eric W. Biederman <ebiederm@lnxi.com> 1121223278 -0600 + + +VARIABLES +---------- +GIT_AUTHOR_IDENT:: + The author of a piece of code. + +GIT_COMMITTER_IDENT:: + The person who put a piece of code into git. + +Diagnostics +----------- +You don't exist. Go away!:: + The passwd(5) gecos field couldn't be read +Your parents must have hated you!:: + The password(5) gecos field is longer than a giant static buffer. +Your sysadmin must hate you!:: + The password(5) name field is longer than a giant static buffer. + +See Also +-------- +linkgit:git-commit-tree[1] +linkgit:git-tag[1] +linkgit:git-config[1] + +Author +------ +Written by Eric Biederman <ebiederm@xmission.com> + +Documentation +-------------- +Documentation by Eric Biederman and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt new file mode 100644 index 0000000..db019a2 --- /dev/null +++ b/Documentation/git-verify-pack.txt @@ -0,0 +1,53 @@ +git-verify-pack(1) +================== + +NAME +---- +git-verify-pack - Validate packed git archive files + + +SYNOPSIS +-------- +'git-verify-pack' [-v] [--] <pack>.idx ... + + +DESCRIPTION +----------- +Reads given idx file for packed git archive created with +git-pack-objects command and verifies idx file and the +corresponding pack file. + +OPTIONS +------- +<pack>.idx ...:: + The idx files to verify. + +-v:: + After verifying the pack, show list of objects contained + in the pack. +\--:: + Do not interpret any more arguments as options. + +OUTPUT FORMAT +------------- +When specifying the -v option the format used is: + + SHA1 type size offset-in-packfile + +for objects that are not deltified in the pack, and + + SHA1 type size offset-in-packfile depth base-SHA1 + +for objects that are deltified. + +Author +------ +Written by Junio C Hamano <junkio@cox.net> + +Documentation +-------------- +Documentation by Junio C Hamano + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt new file mode 100644 index 0000000..7e9c1ed --- /dev/null +++ b/Documentation/git-verify-tag.txt @@ -0,0 +1,31 @@ +git-verify-tag(1) +================= + +NAME +---- +git-verify-tag - Check the GPG signature of tags + +SYNOPSIS +-------- +'git-verify-tag' <tag>... + +DESCRIPTION +----------- +Validates the gpg signature created by git-tag. + +OPTIONS +------- +<tag>:: + SHA1 identifier of a git tag object. + +Author +------ +Written by Jan Harkes <jaharkes@cs.cmu.edu> and Eric W. Biederman <ebiederm@xmission.com> + +Documentation +-------------- +Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-whatchanged.txt b/Documentation/git-whatchanged.txt new file mode 100644 index 0000000..54947b6 --- /dev/null +++ b/Documentation/git-whatchanged.txt @@ -0,0 +1,80 @@ +git-whatchanged(1) +================== + +NAME +---- +git-whatchanged - Show logs with difference each commit introduces + + +SYNOPSIS +-------- +'git-whatchanged' <option>... + +DESCRIPTION +----------- +Shows commit logs and diff output each commit introduces. The +command internally invokes 'git-rev-list' piped to +'git-diff-tree', and takes command line options for both of +these commands. + +This manual page describes only the most frequently used options. + + +OPTIONS +------- +-p:: + Show textual diffs, instead of the git internal diff + output format that is useful only to tell the changed + paths and their nature of changes. + +-<n>:: + Limit output to <n> commits. + +<since>..<until>:: + Limit output to between the two named commits (bottom + exclusive, top inclusive). + +-r:: + Show git internal diff output, but for the whole tree, + not just the top level. + +--pretty=<format>:: + Controls the output format for the commit logs. + <format> can be one of 'raw', 'medium', 'short', 'full', + and 'oneline'. + +-m:: + By default, differences for merge commits are not shown. + With this flag, show differences to that commit from all + of its parents. ++ +However, it is not very useful in general, although it +*is* useful on a file-by-file basis. + +Examples +-------- +git-whatchanged -p v2.6.12.. include/scsi drivers/scsi:: + + Show as patches the commits since version 'v2.6.12' that changed + any file in the include/scsi or drivers/scsi subdirectories + +git-whatchanged --since="2 weeks ago" \-- gitk:: + + Show the changes during the last two weeks to the file 'gitk'. + The "--" is necessary to avoid confusion with the *branch* named + 'gitk' + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> and +Junio C Hamano <junkio@cox.net> + + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt new file mode 100644 index 0000000..461c813 --- /dev/null +++ b/Documentation/git-write-tree.txt @@ -0,0 +1,49 @@ +git-write-tree(1) +================= + +NAME +---- +git-write-tree - Create a tree object from the current index + + +SYNOPSIS +-------- +'git-write-tree' [--missing-ok] [--prefix=<prefix>/] + +DESCRIPTION +----------- +Creates a tree object using the current index. + +The index must be in a fully merged state. + +Conceptually, `git-write-tree` sync()s the current index contents +into a set of tree files. +In order to have that match what is actually in your directory right +now, you need to have done a `git-update-index` phase before you did the +`git-write-tree`. + + +OPTIONS +------- +--missing-ok:: + Normally `git-write-tree` ensures that the objects referenced by the + directory exist in the object database. This option disables this + check. + +--prefix=<prefix>/:: + Writes a tree object that represents a subdirectory + `<prefix>`. This can be used to write the tree object + for a subproject that is in the named subdirectory. + + +Author +------ +Written by Linus Torvalds <torvalds@osdl.org> + +Documentation +-------------- +Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/git.txt b/Documentation/git.txt new file mode 100644 index 0000000..17aee93 --- /dev/null +++ b/Documentation/git.txt @@ -0,0 +1,563 @@ +git(7) +====== + +NAME +---- +git - the stupid content tracker + + +SYNOPSIS +-------- +[verse] +'git' [--version] [--exec-path[=GIT_EXEC_PATH]] + [-p|--paginate|--no-pager] + [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] + [--help] COMMAND [ARGS] + +DESCRIPTION +----------- +Git is a fast, scalable, distributed revision control system with an +unusually rich command set that provides both high-level operations +and full access to internals. + +See this link:tutorial.html[tutorial] to get started, then see +link:everyday.html[Everyday Git] for a useful minimum set of commands, and +"man git-commandname" for documentation of each command. CVS users may +also want to read link:cvs-migration.html[CVS migration]. See +link:user-manual.html[Git User's Manual] for a more in-depth +introduction. + +The COMMAND is either a name of a Git command (see below) or an alias +as defined in the configuration file (see linkgit:git-config[1]). + +Formatted and hyperlinked version of the latest git +documentation can be viewed at +`http://www.kernel.org/pub/software/scm/git/docs/`. + +ifdef::stalenotes[] +[NOTE] +============ + +You are reading the documentation for the latest (possibly +unreleased) version of git, that is available from 'master' +branch of the `git.git` repository. +Documentation for older releases are available here: + +* link:v1.5.4/git.html[documentation for release 1.5.4] + +* release notes for + link:RelNotes-1.5.4.txt[1.5.4]. + +* link:v1.5.3.8/git.html[documentation for release 1.5.3.8] + +* release notes for + link:RelNotes-1.5.3.8.txt[1.5.3.8], + link:RelNotes-1.5.3.7.txt[1.5.3.7], + link:RelNotes-1.5.3.6.txt[1.5.3.6], + link:RelNotes-1.5.3.5.txt[1.5.3.5], + link:RelNotes-1.5.3.4.txt[1.5.3.4], + link:RelNotes-1.5.3.3.txt[1.5.3.3], + link:RelNotes-1.5.3.2.txt[1.5.3.2], + link:RelNotes-1.5.3.1.txt[1.5.3.1], + link:RelNotes-1.5.3.txt[1.5.3]. + +* release notes for + link:RelNotes-1.5.2.5.txt[1.5.2.5], + link:RelNotes-1.5.2.4.txt[1.5.2.4], + link:RelNotes-1.5.2.3.txt[1.5.2.3], + link:RelNotes-1.5.2.2.txt[1.5.2.2], + link:RelNotes-1.5.2.1.txt[1.5.2.1], + link:RelNotes-1.5.2.txt[1.5.2]. + +* link:v1.5.1.6/git.html[documentation for release 1.5.1.6] + +* release notes for + link:RelNotes-1.5.1.6.txt[1.5.1.6], + link:RelNotes-1.5.1.5.txt[1.5.1.5], + link:RelNotes-1.5.1.4.txt[1.5.1.4], + link:RelNotes-1.5.1.3.txt[1.5.1.3], + link:RelNotes-1.5.1.2.txt[1.5.1.2], + link:RelNotes-1.5.1.1.txt[1.5.1.1], + link:RelNotes-1.5.1.txt[1.5.1]. + +* link:v1.5.0.7/git.html[documentation for release 1.5.0.7] + +* release notes for + link:RelNotes-1.5.0.7.txt[1.5.0.7], + link:RelNotes-1.5.0.6.txt[1.5.0.6], + link:RelNotes-1.5.0.5.txt[1.5.0.5], + link:RelNotes-1.5.0.3.txt[1.5.0.3], + link:RelNotes-1.5.0.2.txt[1.5.0.2], + link:RelNotes-1.5.0.1.txt[1.5.0.1], + link:RelNotes-1.5.0.txt[1.5.0]. + +* documentation for release link:v1.4.4.4/git.html[1.4.4.4], + link:v1.3.3/git.html[1.3.3], + link:v1.2.6/git.html[1.2.6], + link:v1.0.13/git.html[1.0.13]. + +============ + +endif::stalenotes[] + +OPTIONS +------- +--version:: + Prints the git suite version that the 'git' program came from. + +--help:: + Prints the synopsis and a list of the most commonly used + commands. If the option '--all' or '-a' is given then all + available commands are printed. If a git command is named this + option will bring up the manual page for that command. ++ +Other options are available to control how the manual page is +displayed. See linkgit:git-help[1] for more information, +because 'git --help ...' is converted internally into 'git +help ...'. + +--exec-path:: + Path to wherever your core git programs are installed. + This can also be controlled by setting the GIT_EXEC_PATH + environment variable. If no path is given 'git' will print + the current setting and then exit. + +-p|--paginate:: + Pipe all output into 'less' (or if set, $PAGER). + +--no-pager:: + Do not pipe git output into a pager. + +--git-dir=<path>:: + Set the path to the repository. This can also be controlled by + setting the GIT_DIR environment variable. + +--work-tree=<path>:: + Set the path to the working tree. The value will not be + used in combination with repositories found automatically in + a .git directory (i.e. $GIT_DIR is not set). + This can also be controlled by setting the GIT_WORK_TREE + environment variable and the core.worktree configuration + variable. + +--bare:: + Treat the repository as a bare repository. If GIT_DIR + environment is not set, it is set to the current working + directory. + + +FURTHER DOCUMENTATION +--------------------- + +See the references above to get started using git. The following is +probably more detail than necessary for a first-time user. + +The link:user-manual.html#git-concepts[git concepts chapter of the +user-manual] and the link:core-tutorial.html[Core tutorial] both provide +introductions to the underlying git architecture. + +See also the link:howto-index.html[howto] documents for some useful +examples. + +The internals are documented link:technical/api-index.html[here]. + +GIT COMMANDS +------------ + +We divide git into high level ("porcelain") commands and low level +("plumbing") commands. + +High-level commands (porcelain) +------------------------------- + +We separate the porcelain commands into the main commands and some +ancillary user utilities. + +Main porcelain commands +~~~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-mainporcelain.txt[] + +Ancillary Commands +~~~~~~~~~~~~~~~~~~ +Manipulators: + +include::cmds-ancillarymanipulators.txt[] + +Interrogators: + +include::cmds-ancillaryinterrogators.txt[] + + +Interacting with Others +~~~~~~~~~~~~~~~~~~~~~~~ + +These commands are to interact with foreign SCM and with other +people via patch over e-mail. + +include::cmds-foreignscminterface.txt[] + + +Low-level commands (plumbing) +----------------------------- + +Although git includes its +own porcelain layer, its low-level commands are sufficient to support +development of alternative porcelains. Developers of such porcelains +might start by reading about linkgit:git-update-index[1] and +linkgit:git-read-tree[1]. + +The interface (input, output, set of options and the semantics) +to these low-level commands are meant to be a lot more stable +than Porcelain level commands, because these commands are +primarily for scripted use. The interface to Porcelain commands +on the other hand are subject to change in order to improve the +end user experience. + +The following description divides +the low-level commands into commands that manipulate objects (in +the repository, index, and working tree), commands that interrogate and +compare objects, and commands that move objects and references between +repositories. + + +Manipulation commands +~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-plumbingmanipulators.txt[] + + +Interrogation commands +~~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-plumbinginterrogators.txt[] + +In general, the interrogate commands do not touch the files in +the working tree. + + +Synching repositories +~~~~~~~~~~~~~~~~~~~~~ + +include::cmds-synchingrepositories.txt[] + +The following are helper programs used by the above; end users +typically do not use them directly. + +include::cmds-synchelpers.txt[] + + +Internal helper commands +~~~~~~~~~~~~~~~~~~~~~~~~ + +These are internal helper commands used by other commands; end +users typically do not use them directly. + +include::cmds-purehelpers.txt[] + + +Configuration Mechanism +----------------------- + +Starting from 0.99.9 (actually mid 0.99.8.GIT), `.git/config` file +is used to hold per-repository configuration options. It is a +simple text file modeled after `.ini` format familiar to some +people. Here is an example: + +------------ +# +# A '#' or ';' character indicates a comment. +# + +; core variables +[core] + ; Don't trust file modes + filemode = false + +; user identity +[user] + name = "Junio C Hamano" + email = "junkio@twinsun.com" + +------------ + +Various commands read from the configuration file and adjust +their operation accordingly. + + +Identifier Terminology +---------------------- +<object>:: + Indicates the object name for any type of object. + +<blob>:: + Indicates a blob object name. + +<tree>:: + Indicates a tree object name. + +<commit>:: + Indicates a commit object name. + +<tree-ish>:: + Indicates a tree, commit or tag object name. A + command that takes a <tree-ish> argument ultimately wants to + operate on a <tree> object but automatically dereferences + <commit> and <tag> objects that point at a <tree>. + +<commit-ish>:: + Indicates a commit or tag object name. A + command that takes a <commit-ish> argument ultimately wants to + operate on a <commit> object but automatically dereferences + <tag> objects that point at a <commit>. + +<type>:: + Indicates that an object type is required. + Currently one of: `blob`, `tree`, `commit`, or `tag`. + +<file>:: + Indicates a filename - almost always relative to the + root of the tree structure `GIT_INDEX_FILE` describes. + +Symbolic Identifiers +-------------------- +Any git command accepting any <object> can also use the following +symbolic notation: + +HEAD:: + indicates the head of the current branch (i.e. the + contents of `$GIT_DIR/HEAD`). + +<tag>:: + a valid tag 'name' + (i.e. the contents of `$GIT_DIR/refs/tags/<tag>`). + +<head>:: + a valid head 'name' + (i.e. the contents of `$GIT_DIR/refs/heads/<head>`). + +For a more complete list of ways to spell object names, see +"SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + + +File/Directory Structure +------------------------ + +Please see the link:repository-layout.html[repository layout] document. + +Read link:hooks.html[hooks] for more details about each hook. + +Higher level SCMs may provide and manage additional information in the +`$GIT_DIR`. + + +Terminology +----------- +Please see the link:glossary.html[glossary] document. + + +Environment Variables +--------------------- +Various git commands use the following environment variables: + +The git Repository +~~~~~~~~~~~~~~~~~~ +These environment variables apply to 'all' core git commands. Nb: it +is worth noting that they may be used/overridden by SCMS sitting above +git so take care if using Cogito etc. + +'GIT_INDEX_FILE':: + This environment allows the specification of an alternate + index file. If not specified, the default of `$GIT_DIR/index` + is used. + +'GIT_OBJECT_DIRECTORY':: + If the object storage directory is specified via this + environment variable then the sha1 directories are created + underneath - otherwise the default `$GIT_DIR/objects` + directory is used. + +'GIT_ALTERNATE_OBJECT_DIRECTORIES':: + Due to the immutable nature of git objects, old objects can be + archived into shared, read-only directories. This variable + specifies a ":" separated list of git object directories which + can be used to search for git objects. New objects will not be + written to these directories. + +'GIT_DIR':: + If the 'GIT_DIR' environment variable is set then it + specifies a path to use instead of the default `.git` + for the base of the repository. + +'GIT_WORK_TREE':: + Set the path to the working tree. The value will not be + used in combination with repositories found automatically in + a .git directory (i.e. $GIT_DIR is not set). + This can also be controlled by the '--work-tree' command line + option and the core.worktree configuration variable. + +git Commits +~~~~~~~~~~~ +'GIT_AUTHOR_NAME':: +'GIT_AUTHOR_EMAIL':: +'GIT_AUTHOR_DATE':: +'GIT_COMMITTER_NAME':: +'GIT_COMMITTER_EMAIL':: +'GIT_COMMITTER_DATE':: +'EMAIL':: + see linkgit:git-commit-tree[1] + +git Diffs +~~~~~~~~~ +'GIT_DIFF_OPTS':: + Only valid setting is "--unified=??" or "-u??" to set the + number of context lines shown when a unified diff is created. + This takes precedence over any "-U" or "--unified" option + value passed on the git diff command line. + +'GIT_EXTERNAL_DIFF':: + When the environment variable 'GIT_EXTERNAL_DIFF' is set, the + program named by it is called, instead of the diff invocation + described above. For a path that is added, removed, or modified, + 'GIT_EXTERNAL_DIFF' is called with 7 parameters: + + path old-file old-hex old-mode new-file new-hex new-mode ++ +where: + + <old|new>-file:: are files GIT_EXTERNAL_DIFF can use to read the + contents of <old|new>, + <old|new>-hex:: are the 40-hexdigit SHA1 hashes, + <old|new>-mode:: are the octal representation of the file modes. + ++ +The file parameters can point at the user's working file +(e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` +when a new file is added), or a temporary file (e.g. `old-file` in the +index). 'GIT_EXTERNAL_DIFF' should not worry about unlinking the +temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. ++ +For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 +parameter, <path>. + +other +~~~~~ +'GIT_MERGE_VERBOSITY':: + A number controlling the amount of output shown by + the recursive merge strategy. Overrides merge.verbosity. + See linkgit:git-merge[1] + +'GIT_PAGER':: + This environment variable overrides `$PAGER`. If it is set + to an empty string or to the value "cat", git will not launch + a pager. + +'GIT_SSH':: + If this environment variable is set then linkgit:git-fetch[1] + and linkgit:git-push[1] will use this command instead + of `ssh` when they need to connect to a remote system. + The 'GIT_SSH' command will be given exactly two arguments: + the 'username@host' (or just 'host') from the URL and the + shell command to execute on that remote system. ++ +To pass options to the program that you want to list in GIT_SSH +you will need to wrap the program and options into a shell script, +then set GIT_SSH to refer to the shell script. ++ +Usually it is easier to configure any desired options through your +personal `.ssh/config` file. Please consult your ssh documentation +for further details. + +'GIT_FLUSH':: + If this environment variable is set to "1", then commands such + as git-blame (in incremental mode), git-rev-list, git-log, + git-whatchanged, etc., will force a flush of the output stream + after each commit-oriented record have been flushed. If this + variable is set to "0", the output of these commands will be done + using completely buffered I/O. If this environment variable is + not set, git will choose buffered or record-oriented flushing + based on whether stdout appears to be redirected to a file or not. + +'GIT_TRACE':: + If this variable is set to "1", "2" or "true" (comparison + is case insensitive), git will print `trace:` messages on + stderr telling about alias expansion, built-in command + execution and external command execution. + If this variable is set to an integer value greater than 1 + and lower than 10 (strictly) then git will interpret this + value as an open file descriptor and will try to write the + trace messages into this file descriptor. + Alternatively, if this variable is set to an absolute path + (starting with a '/' character), git will interpret this + as a file path and will try to write the trace messages + into it. + +Discussion[[Discussion]] +------------------------ + +More detail on the following is available from the +link:user-manual.html#git-concepts[git concepts chapter of the +user-manual] and the link:core-tutorial.html[Core tutorial]. + +A git project normally consists of a working directory with a ".git" +subdirectory at the top level. The .git directory contains, among other +things, a compressed object database representing the complete history +of the project, an "index" file which links that history to the current +contents of the working tree, and named pointers into that history such +as tags and branch heads. + +The object database contains objects of three main types: blobs, which +hold file data; trees, which point to blobs and other trees to build up +directory hierarchies; and commits, which each reference a single tree +and some number of parent commits. + +The commit, equivalent to what other systems call a "changeset" or +"version", represents a step in the project's history, and each parent +represents an immediately preceding step. Commits with more than one +parent represent merges of independent lines of development. + +All objects are named by the SHA1 hash of their contents, normally +written as a string of 40 hex digits. Such names are globally unique. +The entire history leading up to a commit can be vouched for by signing +just that commit. A fourth object type, the tag, is provided for this +purpose. + +When first created, objects are stored in individual files, but for +efficiency may later be compressed together into "pack files". + +Named pointers called refs mark interesting points in history. A ref +may contain the SHA1 name of an object or the name of another ref. Refs +with names beginning `ref/head/` contain the SHA1 name of the most +recent commit (or "head") of a branch under development. SHA1 names of +tags of interest are stored under `ref/tags/`. A special ref named +`HEAD` contains the name of the currently checked-out branch. + +The index file is initialized with a list of all paths and, for each +path, a blob object and a set of attributes. The blob object represents +the contents of the file as of the head of the current branch. The +attributes (last modified time, size, etc.) are taken from the +corresponding file in the working tree. Subsequent changes to the +working tree can be found by comparing these attributes. The index may +be updated with new content, and new commits may be created from the +content stored in the index. + +The index is also capable of storing multiple entries (called "stages") +for a given pathname. These stages are used to hold the various +unmerged version of a file when a merge is in progress. + +Authors +------- +* git's founding father is Linus Torvalds <torvalds@osdl.org>. +* The current git nurse is Junio C Hamano <gitster@pobox.com>. +* The git potty was written by Andreas Ericsson <ae@op5.se>. +* General upbringing is handled by the git-list <git@vger.kernel.org>. + +Documentation +-------------- +The documentation for git suite was started by David Greaves +<david@dgreaves.com>, and later enhanced greatly by the +contributors on the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt new file mode 100644 index 0000000..35a29fd --- /dev/null +++ b/Documentation/gitattributes.txt @@ -0,0 +1,494 @@ +gitattributes(5) +================ + +NAME +---- +gitattributes - defining attributes per path + +SYNOPSIS +-------- +$GIT_DIR/info/attributes, gitattributes + + +DESCRIPTION +----------- + +A `gitattributes` file is a simple text file that gives +`attributes` to pathnames. + +Each line in `gitattributes` file is of form: + + glob attr1 attr2 ... + +That is, a glob pattern followed by an attributes list, +separated by whitespaces. When the glob pattern matches the +path in question, the attributes listed on the line are given to +the path. + +Each attribute can be in one of these states for a given path: + +Set:: + + The path has the attribute with special value "true"; + this is specified by listing only the name of the + attribute in the attribute list. + +Unset:: + + The path has the attribute with special value "false"; + this is specified by listing the name of the attribute + prefixed with a dash `-` in the attribute list. + +Set to a value:: + + The path has the attribute with specified string value; + this is specified by listing the name of the attribute + followed by an equal sign `=` and its value in the + attribute list. + +Unspecified:: + + No glob pattern matches the path, and nothing says if + the path has or does not have the attribute, the + attribute for the path is said to be Unspecified. + +When more than one glob pattern matches the path, a later line +overrides an earlier line. This overriding is done per +attribute. + +When deciding what attributes are assigned to a path, git +consults `$GIT_DIR/info/attributes` file (which has the highest +precedence), `.gitattributes` file in the same directory as the +path in question, and its parent directories (the further the +directory that contains `.gitattributes` is from the path in +question, the lower its precedence). + +Sometimes you would need to override an setting of an attribute +for a path to `unspecified` state. This can be done by listing +the name of the attribute prefixed with an exclamation point `!`. + + +EFFECTS +------- + +Certain operations by git can be influenced by assigning +particular attributes to a path. Currently, the following +operations are attributes-aware. + +Checking-out and checking-in +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +These attributes affect how the contents stored in the +repository are copied to the working tree files when commands +such as `git checkout` and `git merge` run. They also affect how +git stores the contents you prepare in the working tree in the +repository upon `git add` and `git commit`. + +`crlf` +^^^^^^ + +This attribute controls the line-ending convention. + +Set:: + + Setting the `crlf` attribute on a path is meant to mark + the path as a "text" file. 'core.autocrlf' conversion + takes place without guessing the content type by + inspection. + +Unset:: + + Unsetting the `crlf` attribute on a path is meant to + mark the path as a "binary" file. The path never goes + through line endings conversion upon checkin/checkout. + +Unspecified:: + + Unspecified `crlf` attribute tells git to apply the + `core.autocrlf` conversion when the file content looks + like text. + +Set to string value "input":: + + This is similar to setting the attribute to `true`, but + also forces git to act as if `core.autocrlf` is set to + `input` for the path. + +Any other value set to `crlf` attribute is ignored and git acts +as if the attribute is left unspecified. + + +The `core.autocrlf` conversion +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If the configuration variable `core.autocrlf` is false, no +conversion is done. + +When `core.autocrlf` is true, it means that the platform wants +CRLF line endings for files in the working tree, and you want to +convert them back to the normal LF line endings when checking +in to the repository. + +When `core.autocrlf` is set to "input", line endings are +converted to LF upon checkin, but there is no conversion done +upon checkout. + + +`ident` +^^^^^^^ + +When the attribute `ident` is set to a path, git replaces +`$Id$` in the blob object with `$Id:`, followed by +40-character hexadecimal blob object name, followed by a dollar +sign `$` upon checkout. Any byte sequence that begins with +`$Id:` and ends with `$` in the worktree file is replaced +with `$Id$` upon check-in. + + +`filter` +^^^^^^^^ + +A `filter` attribute can be set to a string value that names a +filter driver specified in the configuration. + +A filter driver consists of a `clean` command and a `smudge` +command, either of which can be left unspecified. Upon +checkout, when the `smudge` command is specified, the command is +fed the blob object from its standard input, and its standard +output is used to update the worktree file. Similarly, the +`clean` command is used to convert the contents of worktree file +upon checkin. + +A missing filter driver definition in the config is not an error +but makes the filter a no-op passthru. + +The content filtering is done to massage the content into a +shape that is more convenient for the platform, filesystem, and +the user to use. The key phrase here is "more convenient" and not +"turning something unusable into usable". In other words, the +intent is that if someone unsets the filter driver definition, +or does not have the appropriate filter program, the project +should still be usable. + + +Interaction between checkin/checkout attributes +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In the check-in codepath, the worktree file is first converted +with `filter` driver (if specified and corresponding driver +defined), then the result is processed with `ident` (if +specified), and then finally with `crlf` (again, if specified +and applicable). + +In the check-out codepath, the blob content is first converted +with `crlf`, and then `ident` and fed to `filter`. + + +Generating diff text +~~~~~~~~~~~~~~~~~~~~ + +The attribute `diff` affects if `git diff` generates textual +patch for the path or just says `Binary files differ`. It also +can affect what line is shown on the hunk header `@@ -k,l +n,m @@` +line. + +Set:: + + A path to which the `diff` attribute is set is treated + as text, even when they contain byte values that + normally never appear in text files, such as NUL. + +Unset:: + + A path to which the `diff` attribute is unset will + generate `Binary files differ`. + +Unspecified:: + + A path to which the `diff` attribute is unspecified + first gets its contents inspected, and if it looks like + text, it is treated as text. Otherwise it would + generate `Binary files differ`. + +String:: + + Diff is shown using the specified custom diff driver. + The driver program is given its input using the same + calling convention as used for GIT_EXTERNAL_DIFF + program. This name is also used for custom hunk header + selection. + + +Defining a custom diff driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The definition of a diff driver is done in `gitconfig`, not +`gitattributes` file, so strictly speaking this manual page is a +wrong place to talk about it. However... + +To define a custom diff driver `jcdiff`, add a section to your +`$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: + +---------------------------------------------------------------- +[diff "jcdiff"] + command = j-c-diff +---------------------------------------------------------------- + +When git needs to show you a diff for the path with `diff` +attribute set to `jcdiff`, it calls the command you specified +with the above configuration, i.e. `j-c-diff`, with 7 +parameters, just like `GIT_EXTERNAL_DIFF` program is called. +See linkgit:git[7] for details. + + +Defining a custom hunk-header +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Each group of changes (called "hunk") in the textual diff output +is prefixed with a line of the form: + + @@ -k,l +n,m @@ TEXT + +The text is called 'hunk header', and by default a line that +begins with an alphabet, an underscore or a dollar sign is used, +which matches what GNU `diff -p` output uses. This default +selection however is not suited for some contents, and you can +use customized pattern to make a selection. + +First in .gitattributes, you would assign the `diff` attribute +for paths. + +------------------------ +*.tex diff=tex +------------------------ + +Then, you would define "diff.tex.funcname" configuration to +specify a regular expression that matches a line that you would +want to appear as the hunk header, like this: + +------------------------ +[diff "tex"] + funcname = "^\\(\\\\\\(sub\\)*section{.*\\)$" +------------------------ + +Note. A single level of backslashes are eaten by the +configuration file parser, so you would need to double the +backslashes; the pattern above picks a line that begins with a +backslash, and zero or more occurrences of `sub` followed by +`section` followed by open brace, to the end of line. + +There are a few built-in patterns to make this easier, and `tex` +is one of them, so you do not have to write the above in your +configuration file (you still need to enable this with the +attribute mechanism, via `.gitattributes`). Another built-in +pattern is defined for `java` that defines a pattern suitable +for program text in Java language. + + +Performing a three-way merge +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The attribute `merge` affects how three versions of a file is +merged when a file-level merge is necessary during `git merge`, +and other programs such as `git revert` and `git cherry-pick`. + +Set:: + + Built-in 3-way merge driver is used to merge the + contents in a way similar to `merge` command of `RCS` + suite. This is suitable for ordinary text files. + +Unset:: + + Take the version from the current branch as the + tentative merge result, and declare that the merge has + conflicts. This is suitable for binary files that does + not have a well-defined merge semantics. + +Unspecified:: + + By default, this uses the same built-in 3-way merge + driver as is the case the `merge` attribute is set. + However, `merge.default` configuration variable can name + different merge driver to be used for paths to which the + `merge` attribute is unspecified. + +String:: + + 3-way merge is performed using the specified custom + merge driver. The built-in 3-way merge driver can be + explicitly specified by asking for "text" driver; the + built-in "take the current branch" driver can be + requested with "binary". + + +Built-in merge drivers +^^^^^^^^^^^^^^^^^^^^^^ + +There are a few built-in low-level merge drivers defined that +can be asked for via the `merge` attribute. + +text:: + + Usual 3-way file level merge for text files. Conflicted + regions are marked with conflict markers `<<<<<<<`, + `=======` and `>>>>>>>`. The version from your branch + appears before the `=======` marker, and the version + from the merged branch appears after the `=======` + marker. + +binary:: + + Keep the version from your branch in the work tree, but + leave the path in the conflicted state for the user to + sort out. + +union:: + + Run 3-way file level merge for text files, but take + lines from both versions, instead of leaving conflict + markers. This tends to leave the added lines in the + resulting file in random order and the user should + verify the result. Do not use this if you do not + understand the implications. + + +Defining a custom merge driver +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The definition of a merge driver is done in the `.git/config` +file, not in the `gitattributes` file, so strictly speaking this +manual page is a wrong place to talk about it. However... + +To define a custom merge driver `filfre`, add a section to your +`$GIT_DIR/config` file (or `$HOME/.gitconfig` file) like this: + +---------------------------------------------------------------- +[merge "filfre"] + name = feel-free merge driver + driver = filfre %O %A %B + recursive = binary +---------------------------------------------------------------- + +The `merge.*.name` variable gives the driver a human-readable +name. + +The `merge.*.driver` variable's value is used to construct a +command to run to merge ancestor's version (`%O`), current +version (`%A`) and the other branches' version (`%B`). These +three tokens are replaced with the names of temporary files that +hold the contents of these versions when the command line is +built. + +The merge driver is expected to leave the result of the merge in +the file named with `%A` by overwriting it, and exit with zero +status if it managed to merge them cleanly, or non-zero if there +were conflicts. + +The `merge.*.recursive` variable specifies what other merge +driver to use when the merge driver is called for an internal +merge between common ancestors, when there are more than one. +When left unspecified, the driver itself is used for both +internal merge and the final merge. + + +Checking whitespace errors +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +`whitespace` +^^^^^^^^^^^^ + +The `core.whitespace` configuration variable allows you to define what +`diff` and `apply` should consider whitespace errors for all paths in +the project (See linkgit:git-config[1]). This attribute gives you finer +control per path. + +Set:: + + Notice all types of potential whitespace errors known to git. + +Unset:: + + Do not notice anything as error. + +Unspecified:: + + Use the value of `core.whitespace` configuration variable to + decide what to notice as error. + +String:: + + Specify a comma separate list of common whitespace problems to + notice in the same format as `core.whitespace` configuration + variable. + + +EXAMPLE +------- + +If you have these three `gitattributes` file: + +---------------------------------------------------------------- +(in $GIT_DIR/info/attributes) + +a* foo !bar -baz + +(in .gitattributes) +abc foo bar baz + +(in t/.gitattributes) +ab* merge=filfre +abc -foo -bar +*.c frotz +---------------------------------------------------------------- + +the attributes given to path `t/abc` are computed as follows: + +1. By examining `t/.gitattributes` (which is in the same + directory as the path in question), git finds that the first + line matches. `merge` attribute is set. It also finds that + the second line matches, and attributes `foo` and `bar` + are unset. + +2. Then it examines `.gitattributes` (which is in the parent + directory), and finds that the first line matches, but + `t/.gitattributes` file already decided how `merge`, `foo` + and `bar` attributes should be given to this path, so it + leaves `foo` and `bar` unset. Attribute `baz` is set. + +3. Finally it examines `$GIT_DIR/info/attributes`. This file + is used to override the in-tree settings. The first line is + a match, and `foo` is set, `bar` is reverted to unspecified + state, and `baz` is unset. + +As the result, the attributes assignment to `t/abc` becomes: + +---------------------------------------------------------------- +foo set to true +bar unspecified +baz set to false +merge set to string value "filfre" +frotz unspecified +---------------------------------------------------------------- + + +Creating an archive +~~~~~~~~~~~~~~~~~~~ + +`export-subst` +^^^^^^^^^^^^^^ + +If the attribute `export-subst` is set for a file then git will expand +several placeholders when adding this file to an archive. The +expansion depends on the availability of a commit ID, i.e. if +linkgit:git-archive[1] has been given a tree instead of a commit or a +tag then no replacement will be done. The placeholders are the same +as those for the option `--pretty=format:` of linkgit:git-log[1], +except that they need to be wrapped like this: `$Format:PLACEHOLDERS$` +in the file. E.g. the string `$Format:%H$` will be replaced by the +commit hash. + + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt new file mode 100644 index 0000000..7ee5ce3 --- /dev/null +++ b/Documentation/gitcli.txt @@ -0,0 +1,113 @@ +gitcli(5) +========= + +NAME +---- +gitcli - git command line interface and conventions + +SYNOPSIS +-------- +gitcli + + +DESCRIPTION +----------- + +This manual describes best practice in how to use git CLI. Here are +the rules that you should follow when you are scripting git: + + * it's preferred to use the non dashed form of git commands, which means that + you should prefer `"git foo"` to `"git-foo"`. + + * splitting short options to separate words (prefer `"git foo -a -b"` + to `"git foo -ab"`, the latter may not even work). + + * when a command line option takes an argument, use the 'sticked' form. In + other words, write `"git foo -oArg"` instead of `"git foo -o Arg"` for short + options, and `"git foo --long-opt=Arg"` instead of `"git foo --long-opt Arg"` + for long options. An option that takes optional option-argument must be + written in the 'sticked' form. + + * when you give a revision parameter to a command, make sure the parameter is + not ambiguous with a name of a file in the work tree. E.g. do not write + `"git log -1 HEAD"` but write `"git log -1 HEAD --"`; the former will not work + if you happen to have a file called `HEAD` in the work tree. + + +ENHANCED CLI +------------ +From the git 1.5.4 series and further, many git commands (not all of them at the +time of the writing though) come with an enhanced option parser. + +Here is an exhaustive list of the facilities provided by this option parser. + + +Magic Options +~~~~~~~~~~~~~ +Commands which have the enhanced option parser activated all understand a +couple of magic command line options: + +-h:: + gives a pretty printed usage of the command. ++ +--------------------------------------------- +$ git describe -h +usage: git-describe [options] <committish>* + + --contains find the tag that comes after the commit + --debug debug search strategy on stderr + --all use any ref in .git/refs + --tags use any tag in .git/refs/tags + --abbrev [<n>] use <n> digits to display SHA-1s + --candidates <n> consider <n> most recent tags (default: 10) +--------------------------------------------- + +--help-all:: + Some git commands take options that are only used for plumbing or that + are deprecated, and such options are hidden from the default usage. This + option gives the full list of options. + + +Negating options +~~~~~~~~~~~~~~~~ +Options with long option names can be negated by prefixing `"--no-"`. For +example, `"git branch"` has the option `"--track"` which is 'on' by default. You +can use `"--no-track"` to override that behaviour. The same goes for `"--color"` +and `"--no-color"`. + + +Aggregating short options +~~~~~~~~~~~~~~~~~~~~~~~~~ +Commands that support the enhanced option parser allow you to aggregate short +options. This means that you can for example use `"git rm -rf"` or +`"git clean -fdx"`. + + +Separating argument from the option +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +You can write the mandatory option parameter to an option as a separate +word on the command line. That means that all the following uses work: + +---------------------------- +$ git foo --long-opt=Arg +$ git foo --long-opt Arg +$ git foo -oArg +$ git foo -o Arg +---------------------------- + +However, this is *NOT* allowed for switches with an optional value, where the +'sticked' form must be used: +---------------------------- +$ git describe --abbrev HEAD # correct +$ git describe --abbrev=10 HEAD # correct +$ git describe --abbrev 10 HEAD # NOT WHAT YOU MEANT +---------------------------- + + +Documentation +------------- +Documentation by Pierre Habouzit. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt new file mode 100644 index 0000000..08373f5 --- /dev/null +++ b/Documentation/gitignore.txt @@ -0,0 +1,122 @@ +gitignore(5) +============ + +NAME +---- +gitignore - Specifies intentionally untracked files to ignore + +SYNOPSIS +-------- +$GIT_DIR/info/exclude, .gitignore + +DESCRIPTION +----------- + +A `gitignore` file specifies intentionally untracked files that +git should ignore. Each line in a `gitignore` file specifies a +pattern. + +When deciding whether to ignore a path, git normally checks +`gitignore` patterns from multiple sources, with the following +order of precedence, from highest to lowest (within one level of +precedence, the last matching pattern decides the outcome): + + * Patterns read from the command line for those commands that support + them. + + * Patterns read from a `.gitignore` file in the same directory + as the path, or in any parent directory, with patterns in the + higher level files (up to the root) being overridden by those in + lower level files down to the directory containing the file. + These patterns match relative to the location of the + `.gitignore` file. A project normally includes such + `.gitignore` files in its repository, containing patterns for + files generated as part of the project build. + + * Patterns read from `$GIT_DIR/info/exclude`. + + * Patterns read from the file specified by the configuration + variable 'core.excludesfile'. + +The underlying git plumbing tools, such as +linkgit:git-ls-files[1] and linkgit:git-read-tree[1], read +`gitignore` patterns specified by command-line options, or from +files specified by command-line options. Higher-level git +tools, such as linkgit:git-status[1] and linkgit:git-add[1], +use patterns from the sources specified above. + +Patterns have the following format: + + - A blank line matches no files, so it can serve as a separator + for readability. + + - A line starting with # serves as a comment. + + - An optional prefix '!' which negates the pattern; any + matching file excluded by a previous pattern will become + included again. If a negated pattern matches, this will + override lower precedence patterns sources. + + - If the pattern does not contain a slash '/', git treats it as + a shell glob pattern and checks for a match against the + pathname without leading directories. + + - Otherwise, git treats the pattern as a shell glob suitable + for consumption by fnmatch(3) with the FNM_PATHNAME flag: + wildcards in the pattern will not match a / in the pathname. + For example, "Documentation/\*.html" matches + "Documentation/git.html" but not + "Documentation/ppc/ppc.html". A leading slash matches the + beginning of the pathname; for example, "/*.c" matches + "cat-file.c" but not "mozilla-sha1/sha1.c". + +An example: + +-------------------------------------------------------------- + $ git-status + [...] + # Untracked files: + [...] + # Documentation/foo.html + # Documentation/gitignore.html + # file.o + # lib.a + # src/internal.o + [...] + $ cat .git/info/exclude + # ignore objects and archives, anywhere in the tree. + *.[oa] + $ cat Documentation/.gitignore + # ignore generated html files, + *.html + # except foo.html which is maintained by hand + !foo.html + $ git-status + [...] + # Untracked files: + [...] + # Documentation/foo.html + [...] +-------------------------------------------------------------- + +Another example: + +-------------------------------------------------------------- + $ cat .gitignore + vmlinux* + $ ls arch/foo/kernel/vm* + arch/foo/kernel/vmlinux.lds.S + $ echo '!/vmlinux*' >arch/foo/kernel/.gitignore +-------------------------------------------------------------- + +The second .gitignore prevents git from ignoring +`arch/foo/kernel/vmlinux.lds.S`. + +Documentation +------------- +Documentation by David Greaves, Junio C Hamano, Josh Triplett, +Frank Lichtenheld, and the git-list <git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt new file mode 100644 index 0000000..29edafc --- /dev/null +++ b/Documentation/gitk.txt @@ -0,0 +1,101 @@ +gitk(1) +======= + +NAME +---- +gitk - The git repository browser + +SYNOPSIS +-------- +'gitk' [<option>...] [<revs>] [--] [<path>...] + +DESCRIPTION +----------- +Displays changes in a repository or a selected set of commits. This includes +visualizing the commit graph, showing information related to each commit, and +the files in the trees of each revision. + +Historically, gitk was the first repository browser. It's written in tcl/tk +and started off in a separate repository but was later merged into the main +git repository. + +OPTIONS +------- +To control which revisions to shown, the command takes options applicable to +the linkgit:git-rev-list[1] command. This manual page describes only the most +frequently used options. + +-n <number>, --max-count=<number>:: + + Limits the number of commits to show. + +--since=<date>:: + + Show commits more recent than a specific date. + +--until=<date>:: + + Show commits older than a specific date. + +--all:: + + Show all branches. + +<revs>:: + + Limit the revisions to show. This can be either a single revision + meaning show from the given revision and back, or it can be a range in + the form "'<from>'..'<to>'" to show all revisions between '<from>' and + back to '<to>'. Note, more advanced revision selection can be applied. + For a more complete list of ways to spell object names, see + "SPECIFYING REVISIONS" section in linkgit:git-rev-parse[1]. + +<path>:: + + Limit commits to the ones touching files in the given paths. Note, to + avoid ambiguity wrt. revision names use "--" to separate the paths + from any preceding options. + +Examples +-------- +gitk v2.6.12.. include/scsi drivers/scsi:: + + Show as the changes since version 'v2.6.12' that changed any + file in the include/scsi or drivers/scsi subdirectories + +gitk --since="2 weeks ago" \-- gitk:: + + Show the changes during the last two weeks to the file 'gitk'. + The "--" is necessary to avoid confusion with the *branch* named + 'gitk' + +gitk --max-count=100 --all \-- Makefile:: + + Show at most 100 changes made to the file 'Makefile'. Instead of only + looking for changes in the current branch look in all branches. + +See Also +-------- +'qgit(1)':: + A repository browser written in C++ using Qt. + +'gitview(1)':: + A repository browser written in Python using Gtk. It's based on + 'bzrk(1)' and distributed in the contrib area of the git repository. + +'tig(1)':: + A minimal repository browser and git tool output highlighter written + in C using Ncurses. + +Author +------ +Written by Paul Mackerras <paulus@samba.org>. + +Documentation +-------------- +Documentation by Junio C Hamano, Jonas Fonseca, and the git-list +<git@vger.kernel.org>. + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt new file mode 100644 index 0000000..cc95b69 --- /dev/null +++ b/Documentation/gitmodules.txt @@ -0,0 +1,62 @@ +gitmodules(5) +============= + +NAME +---- +gitmodules - defining submodule properties + +SYNOPSIS +-------- +gitmodules + + +DESCRIPTION +----------- + +The `.gitmodules` file, located in the top-level directory of a git +working tree, is a text file with a syntax matching the requirements +of linkgit:git-config[1]. + +The file contains one subsection per submodule, and the subsection value +is the name of the submodule. Each submodule section also contains the +following required keys: + +submodule.<name>.path:: + Defines the path, relative to the top-level directory of the git + working tree, where the submodule is expected to be checked out. + The path name must not end with a `/`. All submodule paths must + be unique within the .gitmodules file. + +submodule.<name>.url:: + Defines an url from where the submodule repository can be cloned. + + +EXAMPLES +-------- + +Consider the following .gitmodules file: + + [submodule "libfoo"] + path = include/foo + url = git://foo.com/git/lib.git + + [submodule "libbar"] + path = include/bar + url = git://bar.com/git/lib.git + + +This defines two submodules, `libfoo` and `libbar`. These are expected to +be checked out in the paths 'include/foo' and 'include/bar', and for both +submodules an url is specified which can be used for cloning the submodules. + +SEE ALSO +-------- +linkgit:git-submodule[1] linkgit:git-config[1] + +DOCUMENTATION +------------- +Documentation by Lars Hjemli <hjemli@gmail.com> + +GIT +--- +Part of the linkgit:git[7] suite diff --git a/Documentation/glossary.txt b/Documentation/glossary.txt new file mode 100644 index 0000000..ab4caf4 --- /dev/null +++ b/Documentation/glossary.txt @@ -0,0 +1,454 @@ +GIT Glossary +============ + +[[def_alternate_object_database]]alternate object database:: + Via the alternates mechanism, a <<def_repository,repository>> + can inherit part of its <<def_object_database,object database>> + from another object database, which is called "alternate". + +[[def_bare_repository]]bare repository:: + A bare repository is normally an appropriately + named <<def_directory,directory>> with a `.git` suffix that does not + have a locally checked-out copy of any of the files under + revision control. That is, all of the `git` + administrative and control files that would normally be present in the + hidden `.git` sub-directory are directly present in the + `repository.git` directory instead, + and no other files are present and checked out. Usually publishers of + public repositories make bare repositories available. + +[[def_blob_object]]blob object:: + Untyped <<def_object,object>>, e.g. the contents of a file. + +[[def_branch]]branch:: + A "branch" is an active line of development. The most recent + <<def_commit,commit>> on a branch is referred to as the tip of + that branch. The tip of the branch is referenced by a branch + <<def_head,head>>, which moves forward as additional development + is done on the branch. A single git + <<def_repository,repository>> can track an arbitrary number of + branches, but your <<def_working_tree,working tree>> is + associated with just one of them (the "current" or "checked out" + branch), and <<def_HEAD,HEAD>> points to that branch. + +[[def_cache]]cache:: + Obsolete for: <<def_index,index>>. + +[[def_chain]]chain:: + A list of objects, where each <<def_object,object>> in the list contains + a reference to its successor (for example, the successor of a + <<def_commit,commit>> could be one of its <<def_parent,parents>>). + +[[def_changeset]]changeset:: + BitKeeper/cvsps speak for "<<def_commit,commit>>". Since git does not + store changes, but states, it really does not make sense to use the term + "changesets" with git. + +[[def_checkout]]checkout:: + The action of updating the <<def_working_tree,working tree>> to a + <<def_revision,revision>> which was stored in the + <<def_object_database,object database>>. + +[[def_cherry-picking]]cherry-picking:: + In <<def_SCM,SCM>> jargon, "cherry pick" means to choose a subset of + changes out of a series of changes (typically commits) and record them + as a new series of changes on top of a different codebase. In GIT, this is + performed by the "git cherry-pick" command to extract the change introduced + by an existing <<def_commit,commit>> and to record it based on the tip + of the current <<def_branch,branch>> as a new commit. + +[[def_clean]]clean:: + A <<def_working_tree,working tree>> is clean, if it + corresponds to the <<def_revision,revision>> referenced by the current + <<def_head,head>>. Also see "<<def_dirty,dirty>>". + +[[def_commit]]commit:: + As a noun: A single point in the + git history; the entire history of a project is represented as a + set of interrelated commits. The word "commit" is often + used by git in the same places other revision control systems + use the words "revision" or "version". Also used as a short + hand for <<def_commit_object,commit object>>. ++ +As a verb: The action of storing a new snapshot of the project's +state in the git history, by creating a new commit representing the current +state of the <<def_index,index>> and advancing <<def_HEAD,HEAD>> +to point at the new commit. + +[[def_commit_object]]commit object:: + An <<def_object,object>> which contains the information about a + particular <<def_revision,revision>>, such as <<def_parent,parents>>, committer, + author, date and the <<def_tree_object,tree object>> which corresponds + to the top <<def_directory,directory>> of the stored + revision. + +[[def_core_git]]core git:: + Fundamental data structures and utilities of git. Exposes only limited + source code management tools. + +[[def_DAG]]DAG:: + Directed acyclic graph. The <<def_commit,commit>> objects form a + directed acyclic graph, because they have parents (directed), and the + graph of commit objects is acyclic (there is no + <<def_chain,chain>> which begins and ends with the same + <<def_object,object>>). + +[[def_dangling_object]]dangling object:: + An <<def_unreachable_object,unreachable object>> which is not + <<def_reachable,reachable>> even from other unreachable objects; a + dangling object has no references to it from any + reference or <<def_object,object>> in the <<def_repository,repository>>. + +[[def_detached_HEAD]]detached HEAD:: + Normally the <<def_HEAD,HEAD>> stores the name of a + <<def_branch,branch>>. However, git also allows you to <<def_checkout,check out>> + an arbitrary <<def_commit,commit>> that isn't necessarily the tip of any + particular branch. In this case HEAD is said to be "detached". + +[[def_dircache]]dircache:: + You are *waaaaay* behind. See <<def_index,index>>. + +[[def_directory]]directory:: + The list you get with "ls" :-) + +[[def_dirty]]dirty:: + A <<def_working_tree,working tree>> is said to be "dirty" if + it contains modifications which have not been <<def_commit,committed>> to the current + <<def_branch,branch>>. + +[[def_ent]]ent:: + Favorite synonym to "<<def_tree-ish,tree-ish>>" by some total geeks. See + `http://en.wikipedia.org/wiki/Ent_(Middle-earth)` for an in-depth + explanation. Avoid this term, not to confuse people. + +[[def_evil_merge]]evil merge:: + An evil merge is a <<def_merge,merge>> that introduces changes that + do not appear in any <<def_parent,parent>>. + +[[def_fast_forward]]fast forward:: + A fast-forward is a special type of <<def_merge,merge>> where you have a + <<def_revision,revision>> and you are "merging" another + <<def_branch,branch>>'s changes that happen to be a descendant of what + you have. In such these cases, you do not make a new <<def_merge,merge>> + <<def_commit,commit>> but instead just update to his + revision. This will happen frequently on a + <<def_tracking_branch,tracking branch>> of a remote + <<def_repository,repository>>. + +[[def_fetch]]fetch:: + Fetching a <<def_branch,branch>> means to get the + branch's <<def_head_ref,head ref>> from a remote + <<def_repository,repository>>, to find out which objects are + missing from the local <<def_object_database,object database>>, + and to get them, too. See also linkgit:git-fetch[1]. + +[[def_file_system]]file system:: + Linus Torvalds originally designed git to be a user space file system, + i.e. the infrastructure to hold files and directories. That ensured the + efficiency and speed of git. + +[[def_git_archive]]git archive:: + Synonym for <<def_repository,repository>> (for arch people). + +[[def_grafts]]grafts:: + Grafts enables two otherwise different lines of development to be joined + together by recording fake ancestry information for commits. This way + you can make git pretend the set of <<def_parent,parents>> a <<def_commit,commit>> has + is different from what was recorded when the commit was + created. Configured via the `.git/info/grafts` file. + +[[def_hash]]hash:: + In git's context, synonym to <<def_object_name,object name>>. + +[[def_head]]head:: + A <<def_ref,named reference>> to the <<def_commit,commit>> at the tip of a + <<def_branch,branch>>. Heads are stored in + `$GIT_DIR/refs/heads/`, except when using packed refs. (See + linkgit:git-pack-refs[1].) + +[[def_HEAD]]HEAD:: + The current <<def_branch,branch>>. In more detail: Your <<def_working_tree, + working tree>> is normally derived from the state of the tree + referred to by HEAD. HEAD is a reference to one of the + <<def_head,heads>> in your repository, except when using a + <<def_detached_HEAD,detached HEAD>>, in which case it may + reference an arbitrary commit. + +[[def_head_ref]]head ref:: + A synonym for <<def_head,head>>. + +[[def_hook]]hook:: + During the normal execution of several git commands, call-outs are made + to optional scripts that allow a developer to add functionality or + checking. Typically, the hooks allow for a command to be pre-verified + and potentially aborted, and allow for a post-notification after the + operation is done. The hook scripts are found in the + `$GIT_DIR/hooks/` directory, and are enabled by simply + making them executable. + +[[def_index]]index:: + A collection of files with stat information, whose contents are stored + as objects. The index is a stored version of your + <<def_working_tree,working tree>>. Truth be told, it can also contain a second, and even + a third version of a working tree, which are used + when <<def_merge,merging>>. + +[[def_index_entry]]index entry:: + The information regarding a particular file, stored in the + <<def_index,index>>. An index entry can be unmerged, if a + <<def_merge,merge>> was started, but not yet finished (i.e. if + the index contains multiple versions of that file). + +[[def_master]]master:: + The default development <<def_branch,branch>>. Whenever you + create a git <<def_repository,repository>>, a branch named + "master" is created, and becomes the active branch. In most + cases, this contains the local development, though that is + purely by convention and is not required. + +[[def_merge]]merge:: + As a verb: To bring the contents of another + <<def_branch,branch>> (possibly from an external + <<def_repository,repository>>) into the current branch. In the + case where the merged-in branch is from a different repository, + this is done by first <<def_fetch,fetching>> the remote branch + and then merging the result into the current branch. This + combination of fetch and merge operations is called a + <<def_pull,pull>>. Merging is performed by an automatic process + that identifies changes made since the branches diverged, and + then applies all those changes together. In cases where changes + conflict, manual intervention may be required to complete the + merge. ++ +As a noun: unless it is a <<def_fast_forward,fast forward>>, a +successful merge results in the creation of a new <<def_commit,commit>> +representing the result of the merge, and having as +<<def_parent,parents>> the tips of the merged <<def_branch,branches>>. +This commit is referred to as a "merge commit", or sometimes just a +"merge". + +[[def_object]]object:: + The unit of storage in git. It is uniquely identified by the + <<def_SHA1,SHA1>> of its contents. Consequently, an + object can not be changed. + +[[def_object_database]]object database:: + Stores a set of "objects", and an individual <<def_object,object>> is + identified by its <<def_object_name,object name>>. The objects usually + live in `$GIT_DIR/objects/`. + +[[def_object_identifier]]object identifier:: + Synonym for <<def_object_name,object name>>. + +[[def_object_name]]object name:: + The unique identifier of an <<def_object,object>>. The <<def_hash,hash>> + of the object's contents using the Secure Hash Algorithm + 1 and usually represented by the 40 character hexadecimal encoding of + the <<def_hash,hash>> of the object. + +[[def_object_type]]object type:: + One of the identifiers + "<<def_commit,commit>>","<<def_tree,tree>>","<<def_tag,tag>>" or "<<def_blob_object,blob>>" + describing the type of an <<def_object,object>>. + +[[def_octopus]]octopus:: + To <<def_merge,merge>> more than two <<def_branch,branches>>. Also denotes an + intelligent predator. + +[[def_origin]]origin:: + The default upstream <<def_repository,repository>>. Most projects have + at least one upstream project which they track. By default + 'origin' is used for that purpose. New upstream updates + will be fetched into remote <<def_tracking_branch,tracking branches>> named + origin/name-of-upstream-branch, which you can see using + "`git branch -r`". + +[[def_pack]]pack:: + A set of objects which have been compressed into one file (to save space + or to transmit them efficiently). + +[[def_pack_index]]pack index:: + The list of identifiers, and other information, of the objects in a + <<def_pack,pack>>, to assist in efficiently accessing the contents of a + pack. + +[[def_parent]]parent:: + A <<def_commit_object,commit object>> contains a (possibly empty) list + of the logical predecessor(s) in the line of development, i.e. its + parents. + +[[def_pickaxe]]pickaxe:: + The term <<def_pickaxe,pickaxe>> refers to an option to the diffcore + routines that help select changes that add or delete a given text + string. With the `--pickaxe-all` option, it can be used to view the full + <<def_changeset,changeset>> that introduced or removed, say, a + particular line of text. See linkgit:git-diff[1]. + +[[def_plumbing]]plumbing:: + Cute name for <<def_core_git,core git>>. + +[[def_porcelain]]porcelain:: + Cute name for programs and program suites depending on + <<def_core_git,core git>>, presenting a high level access to + core git. Porcelains expose more of a <<def_SCM,SCM>> + interface than the <<def_plumbing,plumbing>>. + +[[def_pull]]pull:: + Pulling a <<def_branch,branch>> means to <<def_fetch,fetch>> it and + <<def_merge,merge>> it. See also linkgit:git-pull[1]. + +[[def_push]]push:: + Pushing a <<def_branch,branch>> means to get the branch's + <<def_head_ref,head ref>> from a remote <<def_repository,repository>>, + find out if it is a direct ancestor to the branch's local + head ref, and in that case, putting all + objects, which are <<def_reachable,reachable>> from the local + head ref, and which are missing from the remote + repository, into the remote + <<def_object_database,object database>>, and updating the remote + head ref. If the remote <<def_head,head>> is not an + ancestor to the local head, the push fails. + +[[def_reachable]]reachable:: + All of the ancestors of a given <<def_commit,commit>> are said to be + "reachable" from that commit. More + generally, one <<def_object,object>> is reachable from + another if we can reach the one from the other by a <<def_chain,chain>> + that follows <<def_tag,tags>> to whatever they tag, + <<def_commit_object,commits>> to their parents or trees, and + <<def_tree_object,trees>> to the trees or <<def_blob_object,blobs>> + that they contain. + +[[def_rebase]]rebase:: + To reapply a series of changes from a <<def_branch,branch>> to a + different base, and reset the <<def_head,head>> of that branch + to the result. + +[[def_ref]]ref:: + A 40-byte hex representation of a <<def_SHA1,SHA1>> or a name that + denotes a particular <<def_object,object>>. These may be stored in + `$GIT_DIR/refs/`. + +[[def_reflog]]reflog:: + A reflog shows the local "history" of a ref. In other words, + it can tell you what the 3rd last revision in _this_ repository + was, and what was the current state in _this_ repository, + yesterday 9:14pm. See linkgit:git-reflog[1] for details. + +[[def_refspec]]refspec:: + A "refspec" is used by <<def_fetch,fetch>> and + <<def_push,push>> to describe the mapping between remote + <<def_ref,ref>> and local ref. They are combined with a colon in + the format <src>:<dst>, preceded by an optional plus sign, +. + For example: `git fetch $URL + refs/heads/master:refs/heads/origin` means "grab the master + <<def_branch,branch>> <<def_head,head>> from the $URL and store + it as my origin branch head". And `git push + $URL refs/heads/master:refs/heads/to-upstream` means "publish my + master branch head as to-upstream branch at $URL". See also + linkgit:git-push[1]. + +[[def_repository]]repository:: + A collection of <<def_ref,refs>> together with an + <<def_object_database,object database>> containing all objects + which are <<def_reachable,reachable>> from the refs, possibly + accompanied by meta data from one or more <<def_porcelain,porcelains>>. A + repository can share an object database with other repositories + via <<def_alternate_object_database,alternates mechanism>>. + +[[def_resolve]]resolve:: + The action of fixing up manually what a failed automatic + <<def_merge,merge>> left behind. + +[[def_revision]]revision:: + A particular state of files and directories which was stored in the + <<def_object_database,object database>>. It is referenced by a + <<def_commit_object,commit object>>. + +[[def_rewind]]rewind:: + To throw away part of the development, i.e. to assign the + <<def_head,head>> to an earlier <<def_revision,revision>>. + +[[def_SCM]]SCM:: + Source code management (tool). + +[[def_SHA1]]SHA1:: + Synonym for <<def_object_name,object name>>. + +[[def_shallow_repository]]shallow repository:: + A shallow <<def_repository,repository>> has an incomplete + history some of whose <<def_commit,commits>> have <<def_parent,parents>> cauterized away (in other + words, git is told to pretend that these commits do not have the + parents, even though they are recorded in the <<def_commit_object,commit + object>>). This is sometimes useful when you are interested only in the + recent history of a project even though the real history recorded in the + upstream is much larger. A shallow repository + is created by giving the `--depth` option to linkgit:git-clone[1], and + its history can be later deepened with linkgit:git-fetch[1]. + +[[def_symref]]symref:: + Symbolic reference: instead of containing the <<def_SHA1,SHA1>> + id itself, it is of the format 'ref: refs/some/thing' and when + referenced, it recursively dereferences to this reference. + '<<def_HEAD,HEAD>>' is a prime example of a symref. Symbolic + references are manipulated with the linkgit:git-symbolic-ref[1] + command. + +[[def_tag]]tag:: + A <<def_ref,ref>> pointing to a <<def_tag_object,tag>> or + <<def_commit_object,commit object>>. In contrast to a <<def_head,head>>, + a tag is not changed by a <<def_commit,commit>>. Tags (not + <<def_tag_object,tag objects>>) are stored in `$GIT_DIR/refs/tags/`. A + git tag has nothing to do with a Lisp tag (which would be + called an <<def_object_type,object type>> in git's context). A + tag is most typically used to mark a particular point in the + commit ancestry <<def_chain,chain>>. + +[[def_tag_object]]tag object:: + An <<def_object,object>> containing a <<def_ref,ref>> pointing to + another object, which can contain a message just like a + <<def_commit_object,commit object>>. It can also contain a (PGP) + signature, in which case it is called a "signed tag object". + +[[def_topic_branch]]topic branch:: + A regular git <<def_branch,branch>> that is used by a developer to + identify a conceptual line of development. Since branches are very easy + and inexpensive, it is often desirable to have several small branches + that each contain very well defined concepts or small incremental yet + related changes. + +[[def_tracking_branch]]tracking branch:: + A regular git <<def_branch,branch>> that is used to follow changes from + another <<def_repository,repository>>. A tracking + branch should not contain direct modifications or have local commits + made to it. A tracking branch can usually be + identified as the right-hand-side <<def_ref,ref>> in a Pull: + <<def_refspec,refspec>>. + +[[def_tree]]tree:: + Either a <<def_working_tree,working tree>>, or a <<def_tree_object,tree + object>> together with the dependent <<def_blob_object,blob>> and tree objects + (i.e. a stored representation of a working tree). + +[[def_tree_object]]tree object:: + An <<def_object,object>> containing a list of file names and modes along + with refs to the associated blob and/or tree objects. A + <<def_tree,tree>> is equivalent to a <<def_directory,directory>>. + +[[def_tree-ish]]tree-ish:: + A <<def_ref,ref>> pointing to either a <<def_commit_object,commit + object>>, a <<def_tree_object,tree object>>, or a <<def_tag_object,tag + object>> pointing to a tag or commit or tree object. + +[[def_unmerged_index]]unmerged index:: + An <<def_index,index>> which contains unmerged + <<def_index_entry,index entries>>. + +[[def_unreachable_object]]unreachable object:: + An <<def_object,object>> which is not <<def_reachable,reachable>> from a + <<def_branch,branch>>, <<def_tag,tag>>, or any other reference. + +[[def_working_tree]]working tree:: + The tree of actual checked out files. The working tree is + normally equal to the <<def_HEAD,HEAD>> plus any local changes + that you have made but not yet committed. diff --git a/Documentation/hooks.txt b/Documentation/hooks.txt new file mode 100644 index 0000000..f110162 --- /dev/null +++ b/Documentation/hooks.txt @@ -0,0 +1,249 @@ +Hooks used by git +================= + +Hooks are little scripts you can place in `$GIT_DIR/hooks` +directory to trigger action at certain points. When +`git-init` is run, a handful example hooks are copied in the +`hooks` directory of the new repository, but by default they are +all disabled. To enable a hook, make it executable with `chmod +x`. + +This document describes the currently defined hooks. + +applypatch-msg +-------------- + +This hook is invoked by `git-am` script. It takes a single +parameter, the name of the file that holds the proposed commit +log message. Exiting with non-zero status causes +`git-am` to abort before applying the patch. + +The hook is allowed to edit the message file in place, and can +be used to normalize the message into some project standard +format (if the project has one). It can also be used to refuse +the commit after inspecting the message file. + +The default 'applypatch-msg' hook, when enabled, runs the +'commit-msg' hook, if the latter is enabled. + +pre-applypatch +-------------- + +This hook is invoked by `git-am`. It takes no parameter, +and is invoked after the patch is applied, but before a commit +is made. Exiting with non-zero status causes the working tree +after application of the patch not committed. + +It can be used to inspect the current working tree and refuse to +make a commit if it does not pass certain test. + +The default 'pre-applypatch' hook, when enabled, runs the +'pre-commit' hook, if the latter is enabled. + +post-applypatch +--------------- + +This hook is invoked by `git-am`. It takes no parameter, +and is invoked after the patch is applied and a commit is made. + +This hook is meant primarily for notification, and cannot affect +the outcome of `git-am`. + +pre-commit +---------- + +This hook is invoked by `git-commit`, and can be bypassed +with `\--no-verify` option. It takes no parameter, and is +invoked before obtaining the proposed commit log message and +making a commit. Exiting with non-zero status from this script +causes the `git-commit` to abort. + +The default 'pre-commit' hook, when enabled, catches introduction +of lines with trailing whitespaces and aborts the commit when +such a line is found. + +commit-msg +---------- + +This hook is invoked by `git-commit`, and can be bypassed +with `\--no-verify` option. It takes a single parameter, the +name of the file that holds the proposed commit log message. +Exiting with non-zero status causes the `git-commit` to +abort. + +The hook is allowed to edit the message file in place, and can +be used to normalize the message into some project standard +format (if the project has one). It can also be used to refuse +the commit after inspecting the message file. + +The default 'commit-msg' hook, when enabled, detects duplicate +"Signed-off-by" lines, and aborts the commit if one is found. + +post-commit +----------- + +This hook is invoked by `git-commit`. It takes no +parameter, and is invoked after a commit is made. + +This hook is meant primarily for notification, and cannot affect +the outcome of `git-commit`. + +post-checkout +----------- + +This hook is invoked when a `git-checkout` is run after having updated the +worktree. The hook is given three parameters: the ref of the previous HEAD, +the ref of the new HEAD (which may or may not have changed), and a flag +indicating whether the checkout was a branch checkout (changing branches, +flag=1) or a file checkout (retrieving a file from the index, flag=0). +This hook cannot affect the outcome of `git-checkout`. + +This hook can be used to perform repository validity checks, auto-display +differences from the previous HEAD if different, or set working dir metadata +properties. + +post-merge +----------- + +This hook is invoked by `git-merge`, which happens when a `git pull` +is done on a local repository. The hook takes a single parameter, a status +flag specifying whether or not the merge being done was a squash merge. +This hook cannot affect the outcome of `git-merge`. + +This hook can be used in conjunction with a corresponding pre-commit hook to +save and restore any form of metadata associated with the working tree +(eg: permissions/ownership, ACLS, etc). See contrib/hooks/setgitperms.perl +for an example of how to do this. + +[[pre-receive]] +pre-receive +----------- + +This hook is invoked by `git-receive-pack` on the remote repository, +which happens when a `git push` is done on a local repository. +Just before starting to update refs on the remote repository, the +pre-receive hook is invoked. Its exit status determines the success +or failure of the update. + +This hook executes once for the receive operation. It takes no +arguments, but for each ref to be updated it receives on standard +input a line of the format: + + <old-value> SP <new-value> SP <ref-name> LF + +where `<old-value>` is the old object name stored in the ref, +`<new-value>` is the new object name to be stored in the ref and +`<ref-name>` is the full name of the ref. +When creating a new ref, `<old-value>` is 40 `0`. + +If the hook exits with non-zero status, none of the refs will be +updated. If the hook exits with zero, updating of individual refs can +still be prevented by the <<update,'update'>> hook. + +Both standard output and standard error output are forwarded to +`git-send-pack` on the other end, so you can simply `echo` messages +for the user. + +[[update]] +update +------ + +This hook is invoked by `git-receive-pack` on the remote repository, +which happens when a `git push` is done on a local repository. +Just before updating the ref on the remote repository, the update hook +is invoked. Its exit status determines the success or failure of +the ref update. + +The hook executes once for each ref to be updated, and takes +three parameters: + + - the name of the ref being updated, + - the old object name stored in the ref, + - and the new objectname to be stored in the ref. + +A zero exit from the update hook allows the ref to be updated. +Exiting with a non-zero status prevents `git-receive-pack` +from updating that ref. + +This hook can be used to prevent 'forced' update on certain refs by +making sure that the object name is a commit object that is a +descendant of the commit object named by the old object name. +That is, to enforce a "fast forward only" policy. + +It could also be used to log the old..new status. However, it +does not know the entire set of branches, so it would end up +firing one e-mail per ref when used naively, though. The +<<post-receive,'post-receive'>> hook is more suited to that. + +Another use suggested on the mailing list is to use this hook to +implement access control which is finer grained than the one +based on filesystem group. + +Both standard output and standard error output are forwarded to +`git-send-pack` on the other end, so you can simply `echo` messages +for the user. + +The default 'update' hook, when enabled--and with +`hooks.allowunannotated` config option turned on--prevents +unannotated tags to be pushed. + +[[post-receive]] +post-receive +------------ + +This hook is invoked by `git-receive-pack` on the remote repository, +which happens when a `git push` is done on a local repository. +It executes on the remote repository once after all the refs have +been updated. + +This hook executes once for the receive operation. It takes no +arguments, but gets the same information as the +<<pre-receive,'pre-receive'>> +hook does on its standard input. + +This hook does not affect the outcome of `git-receive-pack`, as it +is called after the real work is done. + +This supersedes the <<post-update,'post-update'>> hook in that it gets +both old and new values of all the refs in addition to their +names. + +Both standard output and standard error output are forwarded to +`git-send-pack` on the other end, so you can simply `echo` messages +for the user. + +The default 'post-receive' hook is empty, but there is +a sample script `post-receive-email` provided in the `contrib/hooks` +directory in git distribution, which implements sending commit +emails. + +[[post-update]] +post-update +----------- + +This hook is invoked by `git-receive-pack` on the remote repository, +which happens when a `git push` is done on a local repository. +It executes on the remote repository once after all the refs have +been updated. + +It takes a variable number of parameters, each of which is the +name of ref that was actually updated. + +This hook is meant primarily for notification, and cannot affect +the outcome of `git-receive-pack`. + +The 'post-update' hook can tell what are the heads that were pushed, +but it does not know what their original and updated values are, +so it is a poor place to do log old..new. The +<<post-receive,'post-receive'>> hook does get both original and +updated values of the refs. You might consider it instead if you need +them. + +When enabled, the default 'post-update' hook runs +`git-update-server-info` to keep the information used by dumb +transports (e.g., HTTP) up-to-date. If you are publishing +a git repository that is accessible via HTTP, you should +probably enable this hook. + +Both standard output and standard error output are forwarded to +`git-send-pack` on the other end, so you can simply `echo` messages +for the user. diff --git a/Documentation/howto-index.sh b/Documentation/howto-index.sh new file mode 100755 index 0000000..34aa30c --- /dev/null +++ b/Documentation/howto-index.sh @@ -0,0 +1,56 @@ +#!/bin/sh + +cat <<\EOF +GIT Howto Index +=============== + +Here is a collection of mailing list postings made by various +people describing how they use git in their workflow. + +EOF + +for txt +do + title=`expr "$txt" : '.*/\(.*\)\.txt$'` + from=`sed -ne ' + /^$/q + /^From:[ ]/{ + s/// + s/^[ ]*// + s/[ ]*$// + s/^/by / + p + } + ' "$txt"` + + abstract=`sed -ne ' + /^Abstract:[ ]/{ + s/^[^ ]*// + x + s/.*// + x + : again + /^[ ]/{ + s/^[ ]*// + H + n + b again + } + x + p + q + }' "$txt"` + + if grep 'Content-type: text/asciidoc' >/dev/null $txt + then + file=`expr "$txt" : '\(.*\)\.txt$'`.html + else + file="$txt" + fi + + echo "* link:$file[$title] $from +$abstract + +" + +done diff --git a/Documentation/howto/maintain-git.txt b/Documentation/howto/maintain-git.txt new file mode 100644 index 0000000..4357e26 --- /dev/null +++ b/Documentation/howto/maintain-git.txt @@ -0,0 +1,277 @@ +From: Junio C Hamano <gitster@pobox.com> +Date: Wed, 21 Nov 2007 16:32:55 -0800 +Subject: Addendum to "MaintNotes" +Abstract: Imagine that git development is racing along as usual, when our friendly + neighborhood maintainer is struck down by a wayward bus. Out of the + hordes of suckers (loyal developers), you have been tricked (chosen) to + step up as the new maintainer. This howto will show you "how to" do it. + +The maintainer's git time is spent on three activities. + + - Communication (60%) + + Mailing list discussions on general design, fielding user + questions, diagnosing bug reports; reviewing, commenting on, + suggesting alternatives to, and rejecting patches. + + - Integration (30%) + + Applying new patches from the contributors while spotting and + correcting minor mistakes, shuffling the integration and + testing branches, pushing the results out, cutting the + releases, and making announcements. + + - Own development (10%) + + Scratching my own itch and sending proposed patch series out. + +The policy on Integration is informally mentioned in "A Note +from the maintainer" message, which is periodically posted to +this mailing list after each feature release is made. + +The policy. + + - Feature releases are numbered as vX.Y.Z and are meant to + contain bugfixes and enhancements in any area, including + functionality, performance and usability, without regression. + + - Maintenance releases are numbered as vX.Y.Z.W and are meant + to contain only bugfixes for the corresponding vX.Y.Z feature + release and earlier maintenance releases vX.Y.Z.V (V < W). + + - 'master' branch is used to prepare for the next feature + release. In other words, at some point, the tip of 'master' + branch is tagged with vX.Y.Z. + + - 'maint' branch is used to prepare for the next maintenance + release. After the feature release vX.Y.Z is made, the tip + of 'maint' branch is set to that release, and bugfixes will + accumulate on the branch, and at some point, the tip of the + branch is tagged with vX.Y.Z.1, vX.Y.Z.2, and so on. + + - 'next' branch is used to publish changes (both enhancements + and fixes) that (1) have worthwhile goal, (2) are in a fairly + good shape suitable for everyday use, (3) but have not yet + demonstrated to be regression free. New changes are tested + in 'next' before merged to 'master'. + + - 'pu' branch is used to publish other proposed changes that do + not yet pass the criteria set for 'next'. + + - The tips of 'master', 'maint' and 'next' branches will always + fast forward, to allow people to build their own + customization on top of them. + + - Usually 'master' contains all of 'maint', 'next' contains all + of 'master' and 'pu' contains all of 'next'. + + - The tip of 'master' is meant to be more stable than any + tagged releases, and the users are encouraged to follow it. + + - The 'next' branch is where new action takes place, and the + users are encouraged to test it so that regressions and bugs + are found before new topics are merged to 'master'. + + +A typical git day for the maintainer implements the above policy +by doing the following: + + - Scan mailing list and #git channel log. Respond with review + comments, suggestions etc. Kibitz. Collect potentially + usable patches from the mailing list. Patches about a single + topic go to one mailbox (I read my mail in Gnus, and type + \C-o to save/append messages in files in mbox format). + + - Review the patches in the saved mailboxes. Edit proposed log + message for typofixes and clarifications, and add Acks + collected from the list. Edit patch to incorporate "Oops, + that should have been like this" fixes from the discussion. + + - Classify the collected patches and handle 'master' and + 'maint' updates: + + - Obviously correct fixes that pertain to the tip of 'maint' + are directly applied to 'maint'. + + - Obviously correct fixes that pertain to the tip of 'master' + are directly applied to 'master'. + + This step is done with "git am". + + $ git checkout master ;# or "git checkout maint" + $ git am -3 -s mailbox + $ make test + + - Merge downwards (maint->master): + + $ git checkout master + $ git merge maint + $ make test + + - Review the last issue of "What's cooking" message, review the + topics scheduled for merging upwards (topic->master and + topic->maint), and merge. + + $ git checkout master ;# or "git checkout maint" + $ git merge ai/topic ;# or "git merge ai/maint-topic" + $ git log -p ORIG_HEAD.. ;# final review + $ git diff ORIG_HEAD.. ;# final review + $ make test ;# final review + $ git branch -d ai/topic ;# or "git branch -d ai/maint-topic" + + - Merge downwards (maint->master) if needed: + + $ git checkout master + $ git merge maint + $ make test + + - Merge downwards (master->next) if needed: + + $ git checkout next + $ git merge master + $ make test + + - Handle the remaining patches: + + - Anything unobvious that is applicable to 'master' (in other + words, does not depend on anything that is still in 'next' + and not in 'master') is applied to a new topic branch that + is forked from the tip of 'master'. This includes both + enhancements and unobvious fixes to 'master'. A topic + branch is named as ai/topic where "ai" is typically + author's initial and "topic" is a descriptive name of the + topic (in other words, "what's the series is about"). + + - An unobvious fix meant for 'maint' is applied to a new + topic branch that is forked from the tip of 'maint'. The + topic is named as ai/maint-topic. + + - Changes that pertain to an existing topic are applied to + the branch, but: + + - obviously correct ones are applied first; + + - questionable ones are discarded or applied to near the tip; + + - Replacement patches to an existing topic are accepted only + for commits not in 'next'. + + The above except the "replacement" are all done with: + + $ git am -3 -s mailbox + + while patch replacement is often done by: + + $ git format-patch ai/topic~$n..ai/topic ;# export existing + + then replace some parts with the new patch, and reapplying: + + $ git reset --hard ai/topic~$n + $ git am -3 -s 000*.txt + + The full test suite is always run for 'maint' and 'master' + after patch application; for topic branches the tests are run + as time permits. + + - Update "What's cooking" message to review the updates to + existing topics, newly added topics and graduated topics. + + This step is helped with Meta/UWC script (where Meta/ contains + a checkout of the 'todo' branch). + + - Merge topics to 'next'. For each branch whose tip is not + merged to 'next', one of three things can happen: + + - The commits are all next-worthy; merge the topic to next: + + $ git checkout next + $ git merge ai/topic ;# or "git merge ai/maint-topic" + $ make test + + - The new parts are of mixed quality, but earlier ones are + next-worthy; merge the early parts to next: + + $ git checkout next + $ git merge ai/topic~2 ;# the tip two are dubious + $ make test + + - Nothing is next-worthy; do not do anything. + + - Rebase topics that do not have any commit in next yet. This + step is optional but sometimes is worth doing when an old + series that is not in next can take advantage of low-level + framework change that is merged to 'master' already. + + $ git rebase master ai/topic + + This step is helped with Meta/git-topic.perl script to + identify which topic is rebaseable. There also is a + pre-rebase hook to make sure that topics that are already in + 'next' are not rebased beyond the merged commit. + + - Rebuild "pu" to merge the tips of topics not in 'next'. + + $ git checkout pu + $ git reset --hard next + $ git merge ai/topic ;# repeat for all remaining topics + $ make test + + This step is helped with Meta/PU script + + - Push four integration branches to a private repository at + k.org and run "make test" on all of them. + + - Push four integration branches to /pub/scm/git/git.git at + k.org. This triggers its post-update hook which: + + (1) runs "git pull" in $HOME/git-doc/ repository to pull + 'master' just pushed out; + + (2) runs "make doc" in $HOME/git-doc/, install the generated + documentation in staging areas, which are separate + repositories that have html and man branches checked + out. + + (3) runs "git commit" in the staging areas, and run "git + push" back to /pub/scm/git/git.git/ to update the html + and man branches. + + (4) installs generated documentation to /pub/software/scm/git/docs/ + to be viewed from http://www.kernel.org/ + + - Fetch html and man branches back from k.org, and push four + integration branches and the two documentation branches to + repo.or.cz + + +Some observations to be made. + + * Each topic is tested individually, and also together with + other topics cooking in 'next'. Until it matures, none part + of it is merged to 'master'. + + * A topic already in 'next' can get fixes while still in + 'next'. Such a topic will have many merges to 'next' (in + other words, "git log --first-parent next" will show many + "Merge ai/topic to next" for the same topic. + + * An unobvious fix for 'maint' is cooked in 'next' and then + merged to 'master' to make extra sure it is Ok and then + merged to 'maint'. + + * Even when 'next' becomes empty (in other words, all topics + prove stable and are merged to 'master' and "git diff master + next" shows empty), it has tons of merge commits that will + never be in 'master'. + + * In principle, "git log --first-parent master..next" should + show nothing but merges (in practice, there are fixup commits + and reverts that are not merges). + + * Commits near the tip of a topic branch that are not in 'next' + are fair game to be discarded, replaced or rewritten. + Commits already merged to 'next' will not be. + + * Being in the 'next' branch is not a guarantee for a topic to + be included in the next feature release. Being in the + 'master' branch typically is. diff --git a/Documentation/howto/rebase-and-edit.txt b/Documentation/howto/rebase-and-edit.txt new file mode 100644 index 0000000..554909f --- /dev/null +++ b/Documentation/howto/rebase-and-edit.txt @@ -0,0 +1,79 @@ +Date: Sat, 13 Aug 2005 22:16:02 -0700 (PDT) +From: Linus Torvalds <torvalds@osdl.org> +To: Steve French <smfrench@austin.rr.com> +cc: git@vger.kernel.org +Subject: Re: sending changesets from the middle of a git tree +Abstract: In this article, Linus demonstrates how a broken commit + in a sequence of commits can be removed by rewinding the head and + reapplying selected changes. + +On Sat, 13 Aug 2005, Linus Torvalds wrote: + +> That's correct. Same things apply: you can move a patch over, and create a +> new one with a modified comment, but basically the _old_ commit will be +> immutable. + +Let me clarify. + +You can entirely _drop_ old branches, so commits may be immutable, but +nothing forces you to keep them. Of course, when you drop a commit, you'll +always end up dropping all the commits that depended on it, and if you +actually got somebody else to pull that commit you can't drop it from +_their_ repository, but undoing things is not impossible. + +For example, let's say that you've made a mess of things: you've committed +three commits "old->a->b->c", and you notice that "a" was broken, but you +want to save "b" and "c". What you can do is + + # Create a branch "broken" that is the current code + # for reference + git branch broken + + # Reset the main branch to three parents back: this + # effectively undoes the three top commits + git reset HEAD^^^ + git checkout -f + + # Check the result visually to make sure you know what's + # going on + gitk --all + + # Re-apply the two top ones from "broken" + # + # First "parent of broken" (aka b): + git-diff-tree -p broken^ | git-apply --index + git commit --reedit=broken^ + + # Then "top of broken" (aka c): + git-diff-tree -p broken | git-apply --index + git commit --reedit=broken + +and you've now re-applied (and possibly edited the comments) the two +commits b/c, and commit "a" is basically gone (it still exists in the +"broken" branch, of course). + +Finally, check out the end result again: + + # Look at the new commit history + gitk --all + +to see that everything looks sensible. + +And then, you can just remove the broken branch if you decide you really +don't want it: + + # remove 'broken' branch + git branch -d broken + + # Prune old objects if you're really really sure + git prune + +And yeah, I'm sure there are other ways of doing this. And as usual, the +above is totally untested, and I just wrote it down in this email, so if +I've done something wrong, you'll have to figure it out on your own ;) + + Linus +- +To unsubscribe from this list: send the line "unsubscribe git" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt new file mode 100644 index 0000000..7a76045 --- /dev/null +++ b/Documentation/howto/rebase-from-internal-branch.txt @@ -0,0 +1,163 @@ +From: Junio C Hamano <junkio@cox.net> +To: git@vger.kernel.org +Cc: Petr Baudis <pasky@suse.cz>, Linus Torvalds <torvalds@osdl.org> +Subject: Re: sending changesets from the middle of a git tree +Date: Sun, 14 Aug 2005 18:37:39 -0700 +Abstract: In this article, JC talks about how he rebases the + public "pu" branch using the core GIT tools when he updates + the "master" branch, and how "rebase" works. Also discussed + is how this applies to individual developers who sends patches + upstream. + +Petr Baudis <pasky@suse.cz> writes: + +> Dear diary, on Sun, Aug 14, 2005 at 09:57:13AM CEST, I got a letter +> where Junio C Hamano <junkio@cox.net> told me that... +>> Linus Torvalds <torvalds@osdl.org> writes: +>> +>> > Junio, maybe you want to talk about how you move patches from your "pu" +>> > branch to the real branches. +>> +> Actually, wouldn't this be also precisely for what StGIT is intended to? + +Exactly my feeling. I was sort of waiting for Catalin to speak +up. With its basing philosophical ancestry on quilt, this is +the kind of task StGIT is designed to do. + +I just have done a simpler one, this time using only the core +GIT tools. + +I had a handful commits that were ahead of master in pu, and I +wanted to add some documentation bypassing my usual habit of +placing new things in pu first. At the beginning, the commit +ancestry graph looked like this: + + *"pu" head + master --> #1 --> #2 --> #3 + +So I started from master, made a bunch of edits, and committed: + + $ git checkout master + $ cd Documentation; ed git.txt ... + $ cd ..; git add Documentation/*.txt + $ git commit -s + +After the commit, the ancestry graph would look like this: + + *"pu" head + master^ --> #1 --> #2 --> #3 + \ + \---> master + +The old master is now master^ (the first parent of the master). +The new master commit holds my documentation updates. + +Now I have to deal with "pu" branch. + +This is the kind of situation I used to have all the time when +Linus was the maintainer and I was a contributor, when you look +at "master" branch being the "maintainer" branch, and "pu" +branch being the "contributor" branch. Your work started at the +tip of the "maintainer" branch some time ago, you made a lot of +progress in the meantime, and now the maintainer branch has some +other commits you do not have yet. And "git rebase" was written +with the explicit purpose of helping to maintain branches like +"pu". You _could_ merge master to pu and keep going, but if you +eventually want to cherrypick and merge some but not necessarily +all changes back to the master branch, it often makes later +operations for _you_ easier if you rebase (i.e. carry forward +your changes) "pu" rather than merge. So I ran "git rebase": + + $ git checkout pu + $ git rebase master pu + +What this does is to pick all the commits since the current +branch (note that I now am on "pu" branch) forked from the +master branch, and forward port these changes. + + master^ --> #1 --> #2 --> #3 + \ *"pu" head + \---> master --> #1' --> #2' --> #3' + +The diff between master^ and #1 is applied to master and +committed to create #1' commit with the commit information (log, +author and date) taken from commit #1. On top of that #2' and #3' +commits are made similarly out of #2 and #3 commits. + +Old #3 is not recorded in any of the .git/refs/heads/ file +anymore, so after doing this you will have dangling commit if +you ran fsck-cache, which is normal. After testing "pu", you +can run "git prune" to get rid of those original three commits. + +While I am talking about "git rebase", I should talk about how +to do cherrypicking using only the core GIT tools. + +Let's go back to the earlier picture, with different labels. + +You, as an individual developer, cloned upstream repository and +made a couple of commits on top of it. + + *your "master" head + upstream --> #1 --> #2 --> #3 + +You would want changes #2 and #3 incorporated in the upstream, +while you feel that #1 may need further improvements. So you +prepare #2 and #3 for e-mail submission. + + $ git format-patch master^^ master + +This creates two files, 0001-XXXX.patch and 0002-XXXX.patch. Send +them out "To: " your project maintainer and "Cc: " your mailing +list. You could use contributed script git-send-email if +your host has necessary perl modules for this, but your usual +MUA would do as long as it does not corrupt whitespaces in the +patch. + +Then you would wait, and you find out that the upstream picked +up your changes, along with other changes. + + where *your "master" head + upstream --> #1 --> #2 --> #3 + used \ + to be \--> #A --> #2' --> #3' --> #B --> #C + *upstream head + +The two commits #2' and #3' in the above picture record the same +changes your e-mail submission for #2 and #3 contained, but +probably with the new sign-off line added by the upstream +maintainer and definitely with different committer and ancestry +information, they are different objects from #2 and #3 commits. + +You fetch from upstream, but not merge. + + $ git fetch upstream + +This leaves the updated upstream head in .git/FETCH_HEAD but +does not touch your .git/HEAD nor .git/refs/heads/master. +You run "git rebase" now. + + $ git rebase FETCH_HEAD master + +Earlier, I said that rebase applies all the commits from your +branch on top of the upstream head. Well, I lied. "git rebase" +is a bit smarter than that and notices that #2 and #3 need not +be applied, so it only applies #1. The commit ancestry graph +becomes something like this: + + where *your old "master" head + upstream --> #1 --> #2 --> #3 + used \ your new "master" head* + to be \--> #A --> #2' --> #3' --> #B --> #C --> #1' + *upstream + head + +Again, "git prune" would discard the disused commits #1-#3 and +you continue on starting from the new "master" head, which is +the #1' commit. + +-jc + +- +To unsubscribe from this list: send the line "unsubscribe git" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/howto/rebuild-from-update-hook.txt b/Documentation/howto/rebuild-from-update-hook.txt new file mode 100644 index 0000000..8d55dfb --- /dev/null +++ b/Documentation/howto/rebuild-from-update-hook.txt @@ -0,0 +1,86 @@ +Subject: [HOWTO] Using post-update hook +Message-ID: <7vy86o6usx.fsf@assigned-by-dhcp.cox.net> +From: Junio C Hamano <junkio@cox.net> +Date: Fri, 26 Aug 2005 18:19:10 -0700 +Abstract: In this how-to article, JC talks about how he + uses the post-update hook to automate git documentation page + shown at http://www.kernel.org/pub/software/scm/git/docs/. + +The pages under http://www.kernel.org/pub/software/scm/git/docs/ +are built from Documentation/ directory of the git.git project +and needed to be kept up-to-date. The www.kernel.org/ servers +are mirrored and I was told that the origin of the mirror is on +the machine $some.kernel.org, on which I was given an account +when I took over git maintainership from Linus. + +The directories relevant to this how-to are these two: + + /pub/scm/git/git.git/ The public git repository. + /pub/software/scm/git/docs/ The HTML documentation page. + +So I made a repository to generate the documentation under my +home directory over there. + + $ cd + $ mkdir doc-git && cd doc-git + $ git clone /pub/scm/git/git.git/ docgen + +What needs to happen is to update the $HOME/doc-git/docgen/ +working tree, build HTML docs there and install the result in +/pub/software/scm/git/docs/ directory. So I wrote a little +script: + + $ cat >dododoc.sh <<\EOF + #!/bin/sh + cd $HOME/doc-git/docgen || exit + + unset GIT_DIR + + git pull /pub/scm/git/git.git/ master && + cd Documentation && + make install-webdoc + EOF + +Initially I used to run this by hand whenever I push into the +public git repository. Then I did a cron job that ran twice a +day. The current round uses the post-update hook mechanism, +like this: + + $ cat >/pub/scm/git/git.git/hooks/post-update <<\EOF + #!/bin/sh + # + # An example hook script to prepare a packed repository for use over + # dumb transports. + # + # To enable this hook, make this file executable by "chmod +x post-update". + + case " $* " in + *' refs/heads/master '*) + echo $HOME/doc-git/dododoc.sh | at now + ;; + esac + exec git-update-server-info + EOF + $ chmod +x /pub/scm/git/git.git/hooks/post-update + +There are four things worth mentioning: + + - The update-hook is run after the repository accepts a "git + push", under my user privilege. It is given the full names + of refs that have been updated as arguments. My post-update + runs the dododoc.sh script only when the master head is + updated. + + - When update-hook is run, GIT_DIR is set to '.' by the calling + receive-pack. This is inherited by the dododoc.sh run via + the "at" command, and needs to be unset; otherwise, "git + pull" it does into $HOME/doc-git/docgen/ repository would not + work correctly. + + - The stdout of update hook script is not connected to git + push; I run the heavy part of the command inside "at", to + receive the execution report via e-mail. + + - This is still crude and does not protect against simultaneous + make invocations stomping on each other. I would need to add + some locking mechanism for this. diff --git a/Documentation/howto/recover-corrupted-blob-object.txt b/Documentation/howto/recover-corrupted-blob-object.txt new file mode 100644 index 0000000..323b513 --- /dev/null +++ b/Documentation/howto/recover-corrupted-blob-object.txt @@ -0,0 +1,134 @@ +Date: Fri, 9 Nov 2007 08:28:38 -0800 (PST) +From: Linus Torvalds <torvalds@linux-foundation.org> +Subject: corrupt object on git-gc +Abstract: Some tricks to reconstruct blob objects in order to fix + a corrupted repository. + +On Fri, 9 Nov 2007, Yossi Leybovich wrote: +> +> Did not help still the repository look for this object? +> Any one know how can I track this object and understand which file is it + +So exactly *because* the SHA1 hash is cryptographically secure, the hash +itself doesn't actually tell you anything, in order to fix a corrupt +object you basically have to find the "original source" for it. + +The easiest way to do that is almost always to have backups, and find the +same object somewhere else. Backups really are a good idea, and git makes +it pretty easy (if nothing else, just clone the repository somewhere else, +and make sure that you do *not* use a hard-linked clone, and preferably +not the same disk/machine). + +But since you don't seem to have backups right now, the good news is that +especially with a single blob being corrupt, these things *are* somewhat +debuggable. + +First off, move the corrupt object away, and *save* it. The most common +cause of corruption so far has been memory corruption, but even so, there +are people who would be interested in seeing the corruption - but it's +basically impossible to judge the corruption until we can also see the +original object, so right now the corrupt object is useless, but it's very +interesting for the future, in the hope that you can re-create a +non-corrupt version. + +So: + +> ib]$ mv .git/objects/4b/9458b3786228369c63936db65827de3cc06200 ../ + +This is the right thing to do, although it's usually best to save it under +it's full SHA1 name (you just dropped the "4b" from the result ;). + +Let's see what that tells us: + +> ib]$ git-fsck --full +> broken link from tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8 +> to blob 4b9458b3786228369c63936db65827de3cc06200 +> missing blob 4b9458b3786228369c63936db65827de3cc06200 + +Ok, I removed the "dangling commit" messages, because they are just +messages about the fact that you probably have rebased etc, so they're not +at all interesting. But what remains is still very useful. In particular, +we now know which tree points to it! + +Now you can do + + git ls-tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8 + +which will show something like + + 100644 blob 8d14531846b95bfa3564b58ccfb7913a034323b8 .gitignore + 100644 blob ebf9bf84da0aab5ed944264a5db2a65fe3a3e883 .mailmap + 100644 blob ca442d313d86dc67e0a2e5d584b465bd382cbf5c COPYING + 100644 blob ee909f2cc49e54f0799a4739d24c4cb9151ae453 CREDITS + 040000 tree 0f5f709c17ad89e72bdbbef6ea221c69807009f6 Documentation + 100644 blob 1570d248ad9237e4fa6e4d079336b9da62d9ba32 Kbuild + 100644 blob 1c7c229a092665b11cd46a25dbd40feeb31661d9 MAINTAINERS + ... + +and you should now have a line that looks like + + 10064 blob 4b9458b3786228369c63936db65827de3cc06200 my-magic-file + +in the output. This already tells you a *lot* it tells you what file the +corrupt blob came from! + +Now, it doesn't tell you quite enough, though: it doesn't tell what +*version* of the file didn't get correctly written! You might be really +lucky, and it may be the version that you already have checked out in your +working tree, in which case fixing this problem is really simple, just do + + git hash-object -w my-magic-file + +again, and if it outputs the missing SHA1 (4b945..) you're now all done! + +But that's the really lucky case, so let's assume that it was some older +version that was broken. How do you tell which version it was? + +The easiest way to do it is to do + + git log --raw --all --full-history -- subdirectory/my-magic-file + +and that will show you the whole log for that file (please realize that +the tree you had may not be the top-level tree, so you need to figure out +which subdirectory it was in on your own), and because you're asking for +raw output, you'll now get something like + + commit abc + Author: + Date: + .. + :100644 100644 4b9458b... newsha... M somedirectory/my-magic-file + + + commit xyz + Author: + Date: + + .. + :100644 100644 oldsha... 4b9458b... M somedirectory/my-magic-file + +and this actually tells you what the *previous* and *subsequent* versions +of that file were! So now you can look at those ("oldsha" and "newsha" +respectively), and hopefully you have done commits often, and can +re-create the missing my-magic-file version by looking at those older and +newer versions! + +If you can do that, you can now recreate the missing object with + + git hash-object -w <recreated-file> + +and your repository is good again! + +(Btw, you could have ignored the fsck, and started with doing a + + git log --raw --all + +and just looked for the sha of the missing object (4b9458b..) in that +whole thing. It's up to you - git does *have* a lot of information, it is +just missing one particular blob version. + +Trying to recreate trees and especially commits is *much* harder. So you +were lucky that it's a blob. It's quite possible that you can recreate the +thing. + + Linus diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt new file mode 100644 index 0000000..865a666 --- /dev/null +++ b/Documentation/howto/revert-branch-rebase.txt @@ -0,0 +1,193 @@ +From: Junio C Hamano <junkio@cox.net> +To: git@vger.kernel.org +Subject: [HOWTO] Reverting an existing commit +Abstract: In this article, JC gives a small real-life example of using + 'git revert' command, and using a temporary branch and tag for safety + and easier sanity checking. +Date: Mon, 29 Aug 2005 21:39:02 -0700 +Content-type: text/asciidoc +Message-ID: <7voe7g3uop.fsf@assigned-by-dhcp.cox.net> + +Reverting an existing commit +============================ + +One of the changes I pulled into the 'master' branch turns out to +break building GIT with GCC 2.95. While they were well intentioned +portability fixes, keeping things working with gcc-2.95 was also +important. Here is what I did to revert the change in the 'master' +branch and to adjust the 'pu' branch, using core GIT tools and +barebone Porcelain. + +First, prepare a throw-away branch in case I screw things up. + +------------------------------------------------ +$ git checkout -b revert-c99 master +------------------------------------------------ + +Now I am on the 'revert-c99' branch. Let's figure out which commit to +revert. I happen to know that the top of the 'master' branch is a +merge, and its second parent (i.e. foreign commit I merged from) has +the change I would want to undo. Further I happen to know that that +merge introduced 5 commits or so: + +------------------------------------------------ +$ git show-branch --more=4 master master^2 | head +* [master] Merge refs/heads/portable from http://www.cs.berkeley.... + ! [master^2] Replace C99 array initializers with code. +-- +- [master] Merge refs/heads/portable from http://www.cs.berkeley.... +*+ [master^2] Replace C99 array initializers with code. +*+ [master^2~1] Replace unsetenv() and setenv() with older putenv(). +*+ [master^2~2] Include sys/time.h in daemon.c. +*+ [master^2~3] Fix ?: statements. +*+ [master^2~4] Replace zero-length array decls with []. +* [master~1] tutorial note about git branch +------------------------------------------------ + +The '--more=4' above means "after we reach the merge base of refs, +show until we display four more common commits". That last commit +would have been where the "portable" branch was forked from the main +git.git repository, so this would show everything on both branches +since then. I just limited the output to the first handful using +'head'. + +Now I know 'master^2~4' (pronounce it as "find the second parent of +the 'master', and then go four generations back following the first +parent") is the one I would want to revert. Since I also want to say +why I am reverting it, the '-n' flag is given to 'git revert'. This +prevents it from actually making a commit, and instead 'git revert' +leaves the commit log message it wanted to use in '.msg' file: + +------------------------------------------------ +$ git revert -n master^2~4 +$ cat .msg +Revert "Replace zero-length array decls with []." + +This reverts 6c5f9baa3bc0d63e141e0afc23110205379905a4 commit. +$ git diff HEAD ;# to make sure what we are reverting makes sense. +$ make CC=gcc-2.95 clean test ;# make sure it fixed the breakage. +$ make clean test ;# make sure it did not cause other breakage. +------------------------------------------------ + +The reverted change makes sense (from reading the 'diff' output), does +fix the problem (from 'make CC=gcc-2.95' test), and does not cause new +breakage (from the last 'make test'). I'm ready to commit: + +------------------------------------------------ +$ git commit -a -s ;# read .msg into the log, + # and explain why I am reverting. +------------------------------------------------ + +I could have screwed up in any of the above steps, but in the worst +case I could just have done 'git checkout master' to start over. +Fortunately I did not have to; what I have in the current branch +'revert-c99' is what I want. So merge that back into 'master': + +------------------------------------------------ +$ git checkout master +$ git merge revert-c99 ;# this should be a fast forward +Updating from 10d781b9caa4f71495c7b34963bef137216f86a8 to e3a693c... + cache.h | 8 ++++---- + commit.c | 2 +- + ls-files.c | 2 +- + receive-pack.c | 2 +- + server-info.c | 2 +- + 5 files changed, 8 insertions(+), 8 deletions(-) +------------------------------------------------ + +There is no need to redo the test at this point. We fast forwarded +and we know 'master' matches 'revert-c99' exactly. In fact: + +------------------------------------------------ +$ git diff master..revert-c99 +------------------------------------------------ + +says nothing. + +Then we rebase the 'pu' branch as usual. + +------------------------------------------------ +$ git checkout pu +$ git tag pu-anchor pu +$ git rebase master +* Applying: Redo "revert" using three-way merge machinery. +First trying simple merge strategy to cherry-pick. +Finished one cherry-pick. +* Applying: Remove git-apply-patch-script. +First trying simple merge strategy to cherry-pick. +Simple cherry-pick fails; trying Automatic cherry-pick. +Removing Documentation/git-apply-patch-script.txt +Removing git-apply-patch-script +Finished one cherry-pick. +* Applying: Document "git cherry-pick" and "git revert" +First trying simple merge strategy to cherry-pick. +Finished one cherry-pick. +* Applying: mailinfo and applymbox updates +First trying simple merge strategy to cherry-pick. +Finished one cherry-pick. +* Applying: Show commits in topo order and name all commits. +First trying simple merge strategy to cherry-pick. +Finished one cherry-pick. +* Applying: More documentation updates. +First trying simple merge strategy to cherry-pick. +Finished one cherry-pick. +------------------------------------------------ + +The temporary tag 'pu-anchor' is me just being careful, in case 'git +rebase' screws up. After this, I can do these for sanity check: + +------------------------------------------------ +$ git diff pu-anchor..pu ;# make sure we got the master fix. +$ make CC=gcc-2.95 clean test ;# make sure it fixed the breakage. +$ make clean test ;# make sure it did not cause other breakage. +------------------------------------------------ + +Everything is in the good order. I do not need the temporary branch +nor tag anymore, so remove them: + +------------------------------------------------ +$ rm -f .git/refs/tags/pu-anchor +$ git branch -d revert-c99 +------------------------------------------------ + +It was an emergency fix, so we might as well merge it into the +'release candidate' branch, although I expect the next release would +be some days off: + +------------------------------------------------ +$ git checkout rc +$ git pull . master +Packing 0 objects +Unpacking 0 objects + +* committish: e3a693c... refs/heads/master from . +Trying to merge e3a693c... into 8c1f5f0... using 10d781b... +Committed merge 7fb9b7262a1d1e0a47bbfdcbbcf50ce0635d3f8f + cache.h | 8 ++++---- + commit.c | 2 +- + ls-files.c | 2 +- + receive-pack.c | 2 +- + server-info.c | 2 +- + 5 files changed, 8 insertions(+), 8 deletions(-) +------------------------------------------------ + +And the final repository status looks like this: + +------------------------------------------------ +$ git show-branch --more=1 master pu rc +! [master] Revert "Replace zero-length array decls with []." + ! [pu] git-repack: Add option to repack all objects. + * [rc] Merge refs/heads/master from . +--- + + [pu] git-repack: Add option to repack all objects. + + [pu~1] More documentation updates. + + [pu~2] Show commits in topo order and name all commits. + + [pu~3] mailinfo and applymbox updates + + [pu~4] Document "git cherry-pick" and "git revert" + + [pu~5] Remove git-apply-patch-script. + + [pu~6] Redo "revert" using three-way merge machinery. + - [rc] Merge refs/heads/master from . +++* [master] Revert "Replace zero-length array decls with []." + - [rc~1] Merge refs/heads/master from . +... [master~1] Merge refs/heads/portable from http://www.cs.berkeley.... +------------------------------------------------ diff --git a/Documentation/howto/separating-topic-branches.txt b/Documentation/howto/separating-topic-branches.txt new file mode 100644 index 0000000..0d73b31 --- /dev/null +++ b/Documentation/howto/separating-topic-branches.txt @@ -0,0 +1,90 @@ +From: Junio C Hamano <junkio@cox.net> +Subject: Separating topic branches +Abstract: In this article, JC describes how to separate topic branches. + +This text was originally a footnote to a discussion about the +behaviour of the git diff commands. + +Often I find myself doing that [running diff against something other +than HEAD] while rewriting messy development history. For example, I +start doing some work without knowing exactly where it leads, and end +up with a history like this: + + "master" + o---o + \ "topic" + o---o---o---o---o---o + +At this point, "topic" contains something I know I want, but it +contains two concepts that turned out to be completely independent. +And often, one topic component is larger than the other. It may +contain more than two topics. + +In order to rewrite this mess to be more manageable, I would first do +"diff master..topic", to extract the changes into a single patch, start +picking pieces from it to get logically self-contained units, and +start building on top of "master": + + $ git diff master..topic >P.diff + $ git checkout -b topicA master + ... pick and apply pieces from P.diff to build + ... commits on topicA branch. + + o---o---o + / "topicA" + o---o"master" + \ "topic" + o---o---o---o---o---o + +Before doing each commit on "topicA" HEAD, I run "diff HEAD" +before update-index the affected paths, or "diff --cached HEAD" +after. Also I would run "diff --cached master" to make sure +that the changes are only the ones related to "topicA". Usually +I do this for smaller topics first. + +After that, I'd do the remainder of the original "topic", but +for that, I do not start from the patchfile I extracted by +comparing "master" and "topic" I used initially. Still on +"topicA", I extract "diff topic", and use it to rebuild the +other topic: + + $ git diff -R topic >P.diff ;# --cached also would work fine + $ git checkout -b topicB master + ... pick and apply pieces from P.diff to build + ... commits on topicB branch. + + "topicB" + o---o---o---o---o + / + /o---o---o + |/ "topicA" + o---o"master" + \ "topic" + o---o---o---o---o---o + +After I am done, I'd try a pretend-merge between "topicA" and +"topicB" in order to make sure I have not missed anything: + + $ git pull . topicA ;# merge it into current "topicB" + $ git diff topic + "topicB" + o---o---o---o---o---* (pretend merge) + / / + /o---o---o----------' + |/ "topicA" + o---o"master" + \ "topic" + o---o---o---o---o---o + +The last diff better not to show anything other than cleanups +for crufts. Then I can finally clean things up: + + $ git branch -D topic + $ git reset --hard HEAD^ ;# nuke pretend merge + + "topicB" + o---o---o---o---o + / + /o---o---o + |/ "topicA" + o---o"master" diff --git a/Documentation/howto/setup-git-server-over-http.txt b/Documentation/howto/setup-git-server-over-http.txt new file mode 100644 index 0000000..8eadc20 --- /dev/null +++ b/Documentation/howto/setup-git-server-over-http.txt @@ -0,0 +1,256 @@ +From: Rutger Nijlunsing <rutger@nospam.com> +Subject: Setting up a git repository which can be pushed into and pulled from over HTTP. +Date: Thu, 10 Aug 2006 22:00:26 +0200 + +Since Apache is one of those packages people like to compile +themselves while others prefer the bureaucrat's dream Debian, it is +impossible to give guidelines which will work for everyone. Just send +some feedback to the mailing list at git@vger.kernel.org to get this +document tailored to your favorite distro. + + +What's needed: + +- Have an Apache web-server + + On Debian: + $ apt-get install apache2 + To get apache2 by default started, + edit /etc/default/apache2 and set NO_START=0 + +- can edit the configuration of it. + + This could be found under /etc/httpd, or refer to your Apache documentation. + + On Debian: this means being able to edit files under /etc/apache2 + +- can restart it. + + 'apachectl --graceful' might do. If it doesn't, just stop and + restart apache. Be warning that active connections to your server + might be aborted by this. + + On Debian: + $ /etc/init.d/apache2 restart + or + $ /etc/init.d/apache2 force-reload + (which seems to do the same) + This adds symlinks from the /etc/apache2/mods-enabled to + /etc/apache2/mods-available. + +- have permissions to chown a directory + +- have git installed at the server _and_ client + +In effect, this probably means you're going to be root. + + +Step 1: setup a bare GIT repository +----------------------------------- + +At the time of writing, git-http-push cannot remotely create a GIT +repository. So we have to do that at the server side with git. Another +option would be to generate an empty repository at the client and copy +it to the server with WebDAV. But then you're probably the first to +try that out :) + +Create the directory under the DocumentRoot of the directories served +by Apache. As an example we take /usr/local/apache2, but try "grep +DocumentRoot /where/ever/httpd.conf" to find your root: + + $ cd /usr/local/apache/htdocs + $ mkdir my-new-repo.git + + On Debian: + + $ cd /var/www + $ mkdir my-new-repo.git + + +Initialize a bare repository + + $ cd my-new-repo.git + $ git --bare init + + +Change the ownership to your web-server's credentials. Use "grep ^User +httpd.conf" and "grep ^Group httpd.conf" to find out: + + $ chown -R www.www . + + On Debian: + + $ chown -R www-data.www-data . + + +If you do not know which user Apache runs as, you can alternatively do +a "chmod -R a+w .", inspect the files which are created later on, and +set the permissions appropriately. + +Restart apache2, and check whether http://server/my-new-repo.git gives +a directory listing. If not, check whether apache started up +successfully. + + +Step 2: enable DAV on this repository +------------------------------------- + +First make sure the dav_module is loaded. For this, insert in httpd.conf: + + LoadModule dav_module libexec/httpd/libdav.so + AddModule mod_dav.c + +Also make sure that this line exists which is the file used for +locking DAV operations: + + DAVLockDB "/usr/local/apache2/temp/DAV.lock" + + On Debian these steps can be performed with: + + Enable the dav and dav_fs modules of apache: + $ a2enmod dav_fs + (just to be sure. dav_fs might be unneeded, I don't know) + $ a2enmod dav + The DAV lock is located in /etc/apache2/mods-available/dav_fs.conf: + DAVLockDB /var/lock/apache2/DAVLock + +Of course, it can point somewhere else, but the string is actually just a +prefix in some Apache configurations, and therefore the _directory_ has to +be writable by the user Apache runs as. + +Then, add something like this to your httpd.conf + + <Location /my-new-repo.git> + DAV on + AuthType Basic + AuthName "Git" + AuthUserFile /usr/local/apache2/conf/passwd.git + Require valid-user + </Location> + + On Debian: + Create (or add to) /etc/apache2/conf.d/git.conf : + + <Location /my-new-repo.git> + DAV on + AuthType Basic + AuthName "Git" + AuthUserFile /etc/apache2/passwd.git + Require valid-user + </Location> + + Debian automatically reads all files under /etc/apach2/conf.d. + +The password file can be somewhere else, but it has to be readable by +Apache and preferably not readable by the world. + +Create this file by + $ htpasswd -c /usr/local/apache2/conf/passwd.git <user> + + On Debian: + $ htpasswd -c /etc/apache2/passwd.git <user> + +You will be asked a password, and the file is created. Subsequent calls +to htpasswd should omit the '-c' option, since you want to append to the +existing file. + +You need to restart Apache. + +Now go to http://<username>@<servername>/my-new-repo.git in your +browser to check whether it asks for a password and accepts the right +password. + +On Debian: + + To test the WebDAV part, do: + + $ apt-get install litmus + $ litmus http://<servername>/my-new-repo.git <username> <password> + + Most tests should pass. + +A command line tool to test WebDAV is cadaver. + +If you're into Windows, from XP onwards Internet Explorer supports +WebDAV. For this, do Internet Explorer -> Open Location -> +http://<servername>/my-new-repo.git [x] Open as webfolder -> login . + + +Step 3: setup the client +------------------------ + +Make sure that you have HTTP support, i.e. your git was built with curl. +The easiest way to check is to look for the executable 'git-http-push'. + +Then, add the following to your $HOME/.netrc (you can do without, but will be +asked to input your password a _lot_ of times): + + machine <servername> + login <username> + password <password> + +...and set permissions: + chmod 600 ~/.netrc + +If you want to access the web-server by its IP, you have to type that in, +instead of the server name. + +To check whether all is OK, do: + + curl --netrc --location -v http://<username>@<servername>/my-new-repo.git/ + +...this should give a directory listing in HTML of /var/www/my-new-repo.git . + + +Now, add the remote in your existing repository which contains the project +you want to export: + + $ git-config remote.upload.url \ + http://<username>@<servername>/my-new-repo.git/ + +It is important to put the last '/'; Without it, the server will send +a redirect which git-http-push does not (yet) understand, and git-http-push +will repeat the request infinitely. + + +Step 4: make the initial push +----------------------------- + +From your client repository, do + + $ git push upload master + +This pushes branch 'master' (which is assumed to be the branch you +want to export) to repository called 'upload', which we previously +defined with git-config. + + +Troubleshooting: +---------------- + +If git-http-push says + + Error: no DAV locking support on remote repo http://... + +then it means the web-server did not accept your authentication. Make sure +that the user name and password matches in httpd.conf, .netrc and the URL +you are uploading to. + +If git-http-push shows you an error (22/502) when trying to MOVE a blob, +it means that your web-server somehow does not recognize its name in the +request; This can happen when you start Apache, but then disable the +network interface. A simple restart of Apache helps. + +Errors like (22/502) are of format (curl error code/http error +code). So (22/404) means something like 'not found' at the server. + +Reading /usr/local/apache2/logs/error_log is often helpful. + + On Debian: Read /var/log/apache2/error.log instead. + + +Debian References: http://www.debian-administration.org/articles/285 + +Authors + Johannes Schindelin <Johannes.Schindelin@gmx.de> + Rutger Nijlunsing <git@wingding.demon.nl> diff --git a/Documentation/howto/update-hook-example.txt b/Documentation/howto/update-hook-example.txt new file mode 100644 index 0000000..88765b5 --- /dev/null +++ b/Documentation/howto/update-hook-example.txt @@ -0,0 +1,172 @@ +From: Junio C Hamano <junkio@cox.net> and Carl Baldwin <cnb@fc.hp.com> +Subject: control access to branches. +Date: Thu, 17 Nov 2005 23:55:32 -0800 +Message-ID: <7vfypumlu3.fsf@assigned-by-dhcp.cox.net> +Abstract: An example hooks/update script is presented to + implement repository maintenance policies, such as who can push + into which branch and who can make a tag. + +When your developer runs git-push into the repository, +git-receive-pack is run (either locally or over ssh) as that +developer, so is hooks/update script. Quoting from the relevant +section of the documentation: + + Before each ref is updated, if $GIT_DIR/hooks/update file exists + and executable, it is called with three parameters: + + $GIT_DIR/hooks/update refname sha1-old sha1-new + + The refname parameter is relative to $GIT_DIR; e.g. for the + master head this is "refs/heads/master". Two sha1 are the + object names for the refname before and after the update. Note + that the hook is called before the refname is updated, so either + sha1-old is 0{40} (meaning there is no such ref yet), or it + should match what is recorded in refname. + +So if your policy is (1) always require fast-forward push +(i.e. never allow "git-push repo +branch:branch"), (2) you +have a list of users allowed to update each branch, and (3) you +do not let tags to be overwritten, then you can use something +like this as your hooks/update script. + +[jc: editorial note. This is a much improved version by Carl +since I posted the original outline] + +-- >8 -- beginning of script -- >8 -- + +#!/bin/bash + +umask 002 + +# If you are having trouble with this access control hook script +# you can try setting this to true. It will tell you exactly +# why a user is being allowed/denied access. + +verbose=false + +# Default shell globbing messes things up downstream +GLOBIGNORE=* + +function grant { + $verbose && echo >&2 "-Grant- $1" + echo grant + exit 0 +} + +function deny { + $verbose && echo >&2 "-Deny- $1" + echo deny + exit 1 +} + +function info { + $verbose && echo >&2 "-Info- $1" +} + +# Implement generic branch and tag policies. +# - Tags should not be updated once created. +# - Branches should only be fast-forwarded. +case "$1" in + refs/tags/*) + [ -f "$GIT_DIR/$1" ] && + deny >/dev/null "You can't overwrite an existing tag" + ;; + refs/heads/*) + # No rebasing or rewinding + if expr "$2" : '0*$' >/dev/null; then + info "The branch '$1' is new..." + else + # updating -- make sure it is a fast forward + mb=$(git-merge-base "$2" "$3") + case "$mb,$2" in + "$2,$mb") info "Update is fast-forward" ;; + *) deny >/dev/null "This is not a fast-forward update." ;; + esac + fi + ;; + *) + deny >/dev/null \ + "Branch is not under refs/heads or refs/tags. What are you trying to do?" + ;; +esac + +# Implement per-branch controls based on username +allowed_users_file=$GIT_DIR/info/allowed-users +username=$(id -u -n) +info "The user is: '$username'" + +if [ -f "$allowed_users_file" ]; then + rc=$(cat $allowed_users_file | grep -v '^#' | grep -v '^$' | + while read head_pattern user_patterns; do + matchlen=$(expr "$1" : "$head_pattern") + if [ "$matchlen" == "${#1}" ]; then + info "Found matching head pattern: '$head_pattern'" + for user_pattern in $user_patterns; do + info "Checking user: '$username' against pattern: '$user_pattern'" + matchlen=$(expr "$username" : "$user_pattern") + if [ "$matchlen" == "${#username}" ]; then + grant "Allowing user: '$username' with pattern: '$user_pattern'" + fi + done + deny "The user is not in the access list for this branch" + fi + done + ) + case "$rc" in + grant) grant >/dev/null "Granting access based on $allowed_users_file" ;; + deny) deny >/dev/null "Denying access based on $allowed_users_file" ;; + *) ;; + esac +fi + +allowed_groups_file=$GIT_DIR/info/allowed-groups +groups=$(id -G -n) +info "The user belongs to the following groups:" +info "'$groups'" + +if [ -f "$allowed_groups_file" ]; then + rc=$(cat $allowed_groups_file | grep -v '^#' | grep -v '^$' | + while read head_pattern group_patterns; do + matchlen=$(expr "$1" : "$head_pattern") + if [ "$matchlen" == "${#1}" ]; then + info "Found matching head pattern: '$head_pattern'" + for group_pattern in $group_patterns; do + for groupname in $groups; do + info "Checking group: '$groupname' against pattern: '$group_pattern'" + matchlen=$(expr "$groupname" : "$group_pattern") + if [ "$matchlen" == "${#groupname}" ]; then + grant "Allowing group: '$groupname' with pattern: '$group_pattern'" + fi + done + done + deny "None of the user's groups are in the access list for this branch" + fi + done + ) + case "$rc" in + grant) grant >/dev/null "Granting access based on $allowed_groups_file" ;; + deny) deny >/dev/null "Denying access based on $allowed_groups_file" ;; + *) ;; + esac +fi + +deny >/dev/null "There are no more rules to check. Denying access" + +-- >8 -- end of script -- >8 -- + +This uses two files, $GIT_DIR/info/allowed-users and +allowed-groups, to describe which heads can be pushed into by +whom. The format of each file would look like this: + + refs/heads/master junio + refs/heads/cogito$ pasky + refs/heads/bw/.* linus + refs/heads/tmp/.* .* + refs/tags/v[0-9].* junio + +With this, Linus can push or create "bw/penguin" or "bw/zebra" +or "bw/panda" branches, Pasky can do only "cogito", and JC can +do master branch and make versioned tags. And anybody can do +tmp/blah branches. + +------------ diff --git a/Documentation/howto/use-git-daemon.txt b/Documentation/howto/use-git-daemon.txt new file mode 100644 index 0000000..4e2f75c --- /dev/null +++ b/Documentation/howto/use-git-daemon.txt @@ -0,0 +1,51 @@ +How to use git-daemon + +Git can be run in inetd mode and in stand alone mode. But all you want is +let a coworker pull from you, and therefore need to set up a git server +real quick, right? + +Note that git-daemon is not really chatty at the moment, especially when +things do not go according to plan (e.g. a socket could not be bound). + +Another word of warning: if you run + + $ git ls-remote git://127.0.0.1/rule-the-world.git + +and you see a message like + + fatal: The remote end hung up unexpectedly + +it only means that _something_ went wrong. To find out _what_ went wrong, +you have to ask the server. (Git refuses to be more precise for your +security only. Take off your shoes now. You have any coins in your pockets? +Sorry, not allowed -- who knows what you planned to do with them?) + +With these two caveats, let's see an example: + + $ git daemon --reuseaddr --verbose --base-path=/home/gitte/git \ + --export-all -- /home/gitte/git/rule-the-world.git + +(Of course, unless your user name is `gitte` _and_ your repository is in +~/rule-the-world.git, you have to adjust the paths. If your repository is +not bare, be aware that you have to type the path to the .git directory!) + +This invocation tries to reuse the address if it is already taken +(this can save you some debugging, because otherwise killing and restarting +git-daemon could just silently fail to bind to a socket). + +Also, it is (relatively) verbose when somebody actually connects to it. +It also sets the base path, which means that all the projects which can be +accessed using this daemon have to reside in or under that path. + +The option `--export-all` just means that you _don't_ have to create a +file named `git-daemon-export-ok` in each exported repository. (Otherwise, +git-daemon would complain loudly, and refuse to cooperate.) + +Last of all, the repository which should be exported is specified. It is +a good practice to put the paths after a "--" separator. + +Now, test your daemon with + + $ git ls-remote git://127.0.0.1/rule-the-world.git + +If this does not work, find out why, and submit a patch to this document. diff --git a/Documentation/howto/using-merge-subtree.txt b/Documentation/howto/using-merge-subtree.txt new file mode 100644 index 0000000..0953a50 --- /dev/null +++ b/Documentation/howto/using-merge-subtree.txt @@ -0,0 +1,75 @@ +Date: Sat, 5 Jan 2008 20:17:40 -0500 +From: Sean <seanlkml@sympatico.ca> +To: Miklos Vajna <vmiklos@frugalware.org> +Cc: git@vger.kernel.org +Subject: how to use git merge -s subtree? +Abstract: In this article, Sean demonstrates how one can use the subtree merge + strategy. +Content-type: text/asciidoc +Message-ID: <BAYC1-PASMTP12374B54BA370A1E1C6E78AE4E0@CEZ.ICE> + +How to use the subtree merge strategy +===================================== + +There are situations where you want to include contents in your project +from an independently developed project. You can just pull from the +other project as long as there are no conflicting paths. + +The problematic case is when there are conflicting files. Potential +candidates are Makefiles and other standard filenames. You could merge +these files but probably you do not want to. A better solution for this +problem can be to merge the project as its own subdirectory. This is not +supported by the 'recursive' merge strategy, so just pulling won't work. + +What you want is the 'subtree' merge strategy, which helps you in such a +situation. + +In this example, let's say you have the repository at `/path/to/B` (but +it can be an URL as well, if you want). You want to merge the 'master' +branch of that repository to the `dir-B` subdirectory in your current +branch. + +Here is the command sequence you need: + +---------------- +$ git remote add -f Bproject /path/to/B <1> +$ git merge -s ours --no-commit Bproject/master <2> +$ git read-tree --prefix=dir-B/ -u Bproject/master <3> +$ git commit -m "Merge B project as our subdirectory" <4> + +$ git pull -s subtree Bproject master <5> +---------------- +<1> name the other project "Bproject", and fetch. +<2> prepare for the later step to record the result as a merge. +<3> read "master" branch of Bproject to the subdirectory "dir-B". +<4> record the merge result. +<5> maintain the result with subsequent merges using "subtree" + +The first four commands are used for the initial merge, while the last +one is to merge updates from 'B project'. + +Comparing 'subtree' merge with submodules +----------------------------------------- + +- The benefit of using subtree merge is that it requires less + administrative burden from the users of your repository. It works with + older (before Git v1.5.2) clients and you have the code right after + clone. + +- However if you use submodules then you can choose not to transfer the + submodule objects. This may be a problem with the subtree merge. + +- Also, in case you make changes to the other project, it is easier to + submit changes if you just use submodules. + +Additional tips +--------------- + +- If you made changes to the other project in your repository, they may + want to merge from your project. This is possible using subtree -- it + can shift up the paths in your tree and then they can merge only the + relevant parts of your tree. + +- Please note that if the other project merges from you, then it will + connects its history to yours, which can be something they don't want + to. diff --git a/Documentation/i18n.txt b/Documentation/i18n.txt new file mode 100644 index 0000000..1e188e6 --- /dev/null +++ b/Documentation/i18n.txt @@ -0,0 +1,57 @@ +At the core level, git is character encoding agnostic. + + - The pathnames recorded in the index and in the tree objects + are treated as uninterpreted sequences of non-NUL bytes. + What readdir(2) returns are what are recorded and compared + with the data git keeps track of, which in turn are expected + to be what lstat(2) and creat(2) accepts. There is no such + thing as pathname encoding translation. + + - The contents of the blob objects are uninterpreted sequence + of bytes. There is no encoding translation at the core + level. + + - The commit log messages are uninterpreted sequence of non-NUL + bytes. + +Although we encourage that the commit log messages are encoded +in UTF-8, both the core and git Porcelain are designed not to +force UTF-8 on projects. If all participants of a particular +project find it more convenient to use legacy encodings, git +does not forbid it. However, there are a few things to keep in +mind. + +. `git-commit-tree` (hence, `git-commit` which uses it) issues + a warning if the commit log message given to it does not look + like a valid UTF-8 string, unless you explicitly say your + project uses a legacy encoding. The way to say this is to + have i18n.commitencoding in `.git/config` file, like this: ++ +------------ +[i18n] + commitencoding = ISO-8859-1 +------------ ++ +Commit objects created with the above setting record the value +of `i18n.commitencoding` in its `encoding` header. This is to +help other people who look at them later. Lack of this header +implies that the commit log message is encoded in UTF-8. + +. `git-log`, `git-show` and friends looks at the `encoding` + header of a commit object, and tries to re-code the log + message into UTF-8 unless otherwise specified. You can + specify the desired output encoding with + `i18n.logoutputencoding` in `.git/config` file, like this: ++ +------------ +[i18n] + logoutputencoding = ISO-8859-1 +------------ ++ +If you do not have this configuration variable, the value of +`i18n.commitencoding` is used instead. + +Note that we deliberately chose not to re-code the commit log +message when a commit is made to force UTF-8 at the commit +object level, because re-coding to UTF-8 is not necessarily a +reversible operation. diff --git a/Documentation/install-doc-quick.sh b/Documentation/install-doc-quick.sh new file mode 100755 index 0000000..5433cf8 --- /dev/null +++ b/Documentation/install-doc-quick.sh @@ -0,0 +1,31 @@ +#!/bin/sh +# This requires a branch named in $head +# (usually 'man' or 'html', provided by the git.git repository) +set -e +head="$1" +mandir="$2" +SUBDIRECTORY_OK=t +USAGE='<refname> <target directory>' +. git-sh-setup +cd_to_toplevel + +test -z "$mandir" && usage +if ! git rev-parse --verify "$head^0" >/dev/null; then + echo >&2 "head: $head does not exist in the current repository" + usage +fi + +GIT_INDEX_FILE=`pwd`/.quick-doc.index +export GIT_INDEX_FILE +rm -f "$GIT_INDEX_FILE" +trap 'rm -f "$GIT_INDEX_FILE"' 0 + +git read-tree $head +git checkout-index -a -f --prefix="$mandir"/ + +if test -n "$GZ"; then + git ls-tree -r --name-only $head | + xargs printf "$mandir/%s\n" | + xargs gzip -f +fi +rm -f "$GIT_INDEX_FILE" diff --git a/Documentation/install-webdoc.sh b/Documentation/install-webdoc.sh new file mode 100755 index 0000000..2135a8e --- /dev/null +++ b/Documentation/install-webdoc.sh @@ -0,0 +1,39 @@ +#!/bin/sh + +T="$1" + +for h in \ + *.txt *.html \ + howto/*.txt howto/*.html \ + technical/*.txt technical/*.html \ + RelNotes-*.txt *.css +do + if test ! -f "$h" + then + : did not match + elif test -f "$T/$h" && + diff -u -I'Last updated [0-9][0-9]-[A-Z][a-z][a-z]-' "$T/$h" "$h" + then + :; # up to date + else + echo >&2 "# install $h $T/$h" + rm -f "$T/$h" + mkdir -p `dirname "$T/$h"` + cp "$h" "$T/$h" + fi +done +strip_leading=`echo "$T/" | sed -e 's|.|.|g'` +for th in \ + "$T"/*.html "$T"/*.txt \ + "$T"/howto/*.txt "$T"/howto/*.html \ + "$T"/technical/*.txt "$T"/technical/*.html +do + h=`expr "$th" : "$strip_leading"'\(.*\)'` + case "$h" in + index.html) continue ;; + esac + test -f "$h" && continue + echo >&2 "# rm -f $th" + rm -f "$th" +done +ln -sf git.html "$T/index.html" diff --git a/Documentation/manpage-1.72.xsl b/Documentation/manpage-1.72.xsl new file mode 100644 index 0000000..fe3cd72 --- /dev/null +++ b/Documentation/manpage-1.72.xsl @@ -0,0 +1,17 @@ +<!-- callout.xsl: converts asciidoc callouts to man page format --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> +<xsl:template match="co"> + <xsl:value-of select="concat('▓fB(',substring-after(@id,'-'),')▓fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:text>⌂sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat('▓fB',substring-after(@arearefs,'-'),'. ▓fR')"/> + <xsl:apply-templates/> + <xsl:text>⌂br </xsl:text> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt new file mode 100644 index 0000000..9f1fc82 --- /dev/null +++ b/Documentation/merge-options.txt @@ -0,0 +1,44 @@ +--summary:: + Show a diffstat at the end of the merge. The diffstat is also + controlled by the configuration option merge.diffstat. + +-n, \--no-summary:: + Do not show diffstat at the end of the merge. + +--no-commit:: + Perform the merge but pretend the merge failed and do + not autocommit, to give the user a chance to inspect and + further tweak the merge result before committing. + +--commit:: + Perform the merge and commit the result. This option can + be used to override --no-commit. + +--squash:: + Produce the working tree and index state as if a real + merge happened, but do not actually make a commit or + move the `HEAD`, nor record `$GIT_DIR/MERGE_HEAD` to + cause the next `git commit` command to create a merge + commit. This allows you to create a single commit on + top of the current branch whose effect is the same as + merging another branch (or more in case of an octopus). + +--no-squash:: + Perform the merge and commit the result. This option can + be used to override --squash. + +--no-ff:: + Generate a merge commit even if the merge resolved as a + fast-forward. + +--ff:: + Do not generate a merge commit if the merge resolved as + a fast-forward, only update the branch pointer. This is + the default behavior of git-merge. + +-s <strategy>, \--strategy=<strategy>:: + Use the given merge strategy; can be supplied more than + once to specify them in the order they should be tried. + If there is no `-s` option, a built-in list of strategies + is used instead (`git-merge-recursive` when merging a single + head, `git-merge-octopus` otherwise). diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt new file mode 100644 index 0000000..7df0266 --- /dev/null +++ b/Documentation/merge-strategies.txt @@ -0,0 +1,35 @@ +MERGE STRATEGIES +---------------- + +resolve:: + This can only resolve two heads (i.e. the current branch + and another branch you pulled from) using 3-way merge + algorithm. It tries to carefully detect criss-cross + merge ambiguities and is considered generally safe and + fast. + +recursive:: + This can only resolve two heads using 3-way merge + algorithm. When there are more than one common + ancestors that can be used for 3-way merge, it creates a + merged tree of the common ancestors and uses that as + the reference tree for the 3-way merge. This has been + reported to result in fewer merge conflicts without + causing mis-merges by tests done on actual merge commits + taken from Linux 2.6 kernel development history. + Additionally this can detect and handle merges involving + renames. This is the default merge strategy when + pulling or merging one branch. + +octopus:: + This resolves more than two-head case, but refuses to do + complex merge that needs manual resolution. It is + primarily meant to be used for bundling topic branch + heads together. This is the default merge strategy when + pulling or merging more than one branches. + +ours:: + This resolves any number of heads, but the result of the + merge is always the current branch head. It is meant to + be used to supersede old development history of side + branches. diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt new file mode 100644 index 0000000..0193c3c --- /dev/null +++ b/Documentation/pretty-formats.txt @@ -0,0 +1,125 @@ +PRETTY FORMATS +-------------- + +If the commit is a merge, and if the pretty-format +is not 'oneline', 'email' or 'raw', an additional line is +inserted before the 'Author:' line. This line begins with +"Merge: " and the sha1s of ancestral commits are printed, +separated by spaces. Note that the listed commits may not +necessarily be the list of the *direct* parent commits if you +have limited your view of history: for example, if you are +only interested in changes related to a certain directory or +file. + +Here are some additional details for each format: + +* 'oneline' + + <sha1> <title line> ++ +This is designed to be as compact as possible. + +* 'short' + + commit <sha1> + Author: <author> + + <title line> + +* 'medium' + + commit <sha1> + Author: <author> + Date: <date> + + <title line> + + <full commit message> + +* 'full' + + commit <sha1> + Author: <author> + Commit: <committer> + + <title line> + + <full commit message> + +* 'fuller' + + commit <sha1> + Author: <author> + AuthorDate: <date & time> + Commit: <committer> + CommitDate: <date & time> + + <title line> + + <full commit message> + +* 'email' + + From <sha1> <date> + From: <author> + Date: <date & time> + Subject: [PATCH] <title line> + + <full commit message> + +* 'raw' ++ +The 'raw' format shows the entire commit exactly as +stored in the commit object. Notably, the SHA1s are +displayed in full, regardless of whether --abbrev or +--no-abbrev are used, and 'parents' information show the +true parent commits, without taking grafts nor history +simplification into account. + +* 'format:' ++ +The 'format:' format allows you to specify which information +you want to show. It works a little bit like printf format, +with the notable exception that you get a newline with '%n' +instead of '\n'. ++ +E.g, 'format:"The author of %h was %an, %ar%nThe title was >>%s<<%n"' +would show something like this: ++ +------- +The author of fe6e0ee was Junio C Hamano, 23 hours ago +The title was >>t4119: test autocomputing -p<n> for traditional diff input.<< + +-------- ++ +The placeholders are: + +- '%H': commit hash +- '%h': abbreviated commit hash +- '%T': tree hash +- '%t': abbreviated tree hash +- '%P': parent hashes +- '%p': abbreviated parent hashes +- '%an': author name +- '%ae': author email +- '%ad': author date +- '%aD': author date, RFC2822 style +- '%ar': author date, relative +- '%at': author date, UNIX timestamp +- '%ai': author date, ISO 8601 format +- '%cn': committer name +- '%ce': committer email +- '%cd': committer date +- '%cD': committer date, RFC2822 style +- '%cr': committer date, relative +- '%ct': committer date, UNIX timestamp +- '%ci': committer date, ISO 8601 format +- '%e': encoding +- '%s': subject +- '%b': body +- '%Cred': switch color to red +- '%Cgreen': switch color to green +- '%Cblue': switch color to blue +- '%Creset': reset color +- '%m': left, right or boundary mark +- '%n': newline diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt new file mode 100644 index 0000000..973d8dd --- /dev/null +++ b/Documentation/pretty-options.txt @@ -0,0 +1,22 @@ +--pretty[='<format>']:: + + Pretty-print the contents of the commit logs in a given format, + where '<format>' can be one of 'oneline', 'short', 'medium', + 'full', 'fuller', 'email', 'raw' and 'format:<string>'. + When omitted, the format defaults to 'medium'. + +--abbrev-commit:: + Instead of showing the full 40-byte hexadecimal commit object + name, show only handful hexdigits prefix. Non default number of + digits can be specified with "--abbrev=<n>" (which also modifies + diff output, if it is displayed). ++ +This should make "--pretty=oneline" a whole lot more readable for +people using 80-column terminals. + +--encoding[=<encoding>]:: + The commit objects record the encoding used for the log message + in their encoding header; this option can be used to tell the + command to re-code the commit log message in the encoding + preferred by the user. For non plumbing commands this + defaults to UTF-8. diff --git a/Documentation/pull-fetch-param.txt b/Documentation/pull-fetch-param.txt new file mode 100644 index 0000000..b6eb7fc --- /dev/null +++ b/Documentation/pull-fetch-param.txt @@ -0,0 +1,65 @@ +<repository>:: + The "remote" repository that is the source of a fetch + or pull operation. See the section <<URLS,GIT URLS>> below. + +<refspec>:: + The canonical format of a <refspec> parameter is + `+?<src>:<dst>`; that is, an optional plus `+`, followed + by the source ref, followed by a colon `:`, followed by + the destination ref. ++ +The remote ref that matches <src> +is fetched, and if <dst> is not empty string, the local +ref that matches it is fast forwarded using <src>. +Again, if the optional plus `+` is used, the local ref +is updated even if it does not result in a fast forward +update. ++ +[NOTE] +If the remote branch from which you want to pull is +modified in non-linear ways such as being rewound and +rebased frequently, then a pull will attempt a merge with +an older version of itself, likely conflict, and fail. +It is under these conditions that you would want to use +the `+` sign to indicate non-fast-forward updates will +be needed. There is currently no easy way to determine +or declare that a branch will be made available in a +repository with this behavior; the pulling user simply +must know this is the expected usage pattern for a branch. ++ +[NOTE] +You never do your own development on branches that appear +on the right hand side of a <refspec> colon on `Pull:` lines; +they are to be updated by `git-fetch`. If you intend to do +development derived from a remote branch `B`, have a `Pull:` +line to track it (i.e. `Pull: B:remote-B`), and have a separate +branch `my-B` to do your development on top of it. The latter +is created by `git branch my-B remote-B` (or its equivalent `git +checkout -b my-B remote-B`). Run `git fetch` to keep track of +the progress of the remote side, and when you see something new +on the remote branch, merge it into your development branch with +`git pull . remote-B`, while you are on `my-B` branch. ++ +[NOTE] +There is a difference between listing multiple <refspec> +directly on `git-pull` command line and having multiple +`Pull:` <refspec> lines for a <repository> and running +`git-pull` command without any explicit <refspec> parameters. +<refspec> listed explicitly on the command line are always +merged into the current branch after fetching. In other words, +if you list more than one remote refs, you would be making +an Octopus. While `git-pull` run without any explicit <refspec> +parameter takes default <refspec>s from `Pull:` lines, it +merges only the first <refspec> found into the current branch, +after fetching all the remote refs. This is because making an +Octopus from remote refs is rarely done, while keeping track +of multiple remote heads in one-go by fetching more than one +is often useful. ++ +Some short-cut notations are also supported. ++ +* `tag <tag>` means the same as `refs/tags/<tag>:refs/tags/<tag>`; + it requests fetching everything up to the given tag. +* A parameter <ref> without a colon is equivalent to + <ref>: when pulling/fetching, so it merges <ref> into the current + branch without storing the remote branch anywhere locally diff --git a/Documentation/repository-layout.txt b/Documentation/repository-layout.txt new file mode 100644 index 0000000..6939130 --- /dev/null +++ b/Documentation/repository-layout.txt @@ -0,0 +1,179 @@ +git repository layout +===================== + +You may find these things in your git repository (`.git` +directory for a repository associated with your working tree, or +`'project'.git` directory for a public 'bare' repository). + +objects:: + Object store associated with this repository. Usually + an object store is self sufficient (i.e. all the objects + that are referred to by an object found in it are also + found in it), but there are couple of ways to violate + it. ++ +. You could populate the repository by running a commit walker +without `-a` option. Depending on which options are given, you +could have only commit objects without associated blobs and +trees this way, for example. A repository with this kind of +incomplete object store is not suitable to be published to the +outside world but sometimes useful for private repository. +. You also could have an incomplete but locally usable repository +by cloning shallowly. See linkgit:git-clone[1]. +. You can be using `objects/info/alternates` mechanism, or +`$GIT_ALTERNATE_OBJECT_DIRECTORIES` mechanism to 'borrow' +objects from other object stores. A repository with this kind +of incomplete object store is not suitable to be published for +use with dumb transports but otherwise is OK as long as +`objects/info/alternates` points at the right object stores +it borrows from. + +objects/[0-9a-f][0-9a-f]:: + Traditionally, each object is stored in its own file. + They are split into 256 subdirectories using the first + two letters from its object name to keep the number of + directory entries `objects` directory itself needs to + hold. Objects found here are often called 'unpacked' + (or 'loose') objects. + +objects/pack:: + Packs (files that store many object in compressed form, + along with index files to allow them to be randomly + accessed) are found in this directory. + +objects/info:: + Additional information about the object store is + recorded in this directory. + +objects/info/packs:: + This file is to help dumb transports discover what packs + are available in this object store. Whenever a pack is + added or removed, `git update-server-info` should be run + to keep this file up-to-date if the repository is + published for dumb transports. `git repack` does this + by default. + +objects/info/alternates:: + This file records paths to alternate object stores that + this object store borrows objects from, one pathname per + line. Note that not only native Git tools use it locally, + but the HTTP fetcher also tries to use it remotely; this + will usually work if you have relative paths (relative + to the object database, not to the repository!) in your + alternates file, but it will not work if you use absolute + paths unless the absolute path in filesystem and web URL + is the same. See also 'objects/info/http-alternates'. + +objects/info/http-alternates:: + This file records URLs to alternate object stores that + this object store borrows objects from, to be used when + the repository is fetched over HTTP. + +refs:: + References are stored in subdirectories of this + directory. The `git prune` command knows to keep + objects reachable from refs found in this directory and + its subdirectories. + +refs/heads/`name`:: + records tip-of-the-tree commit objects of branch `name` + +refs/tags/`name`:: + records any object name (not necessarily a commit + object, or a tag object that points at a commit object). + +refs/remotes/`name`:: + records tip-of-the-tree commit objects of branches copied + from a remote repository. + +packed-refs:: + records the same information as refs/heads/, refs/tags/, + and friends record in a more efficient way. See + linkgit:git-pack-refs[1]. + +HEAD:: + A symref (see glossary) to the `refs/heads/` namespace + describing the currently active branch. It does not mean + much if the repository is not associated with any working tree + (i.e. a 'bare' repository), but a valid git repository + *must* have the HEAD file; some porcelains may use it to + guess the designated "default" branch of the repository + (usually 'master'). It is legal if the named branch + 'name' does not (yet) exist. In some legacy setups, it is + a symbolic link instead of a symref that points at the current + branch. ++ +HEAD can also record a specific commit directly, instead of +being a symref to point at the current branch. Such a state +is often called 'detached HEAD', and almost all commands work +identically as normal. See linkgit:git-checkout[1] for +details. + +branches:: + A slightly deprecated way to store shorthands to be used + to specify URL to `git fetch`, `git pull` and `git push` + commands is to store a file in `branches/'name'` and + give 'name' to these commands in place of 'repository' + argument. + +hooks:: + Hooks are customization scripts used by various git + commands. A handful of sample hooks are installed when + `git init` is run, but all of them are disabled by + default. To enable, they need to be made executable. + Read link:hooks.html[hooks] for more details about + each hook. + +index:: + The current index file for the repository. It is + usually not found in a bare repository. + +info:: + Additional information about the repository is recorded + in this directory. + +info/refs:: + This file helps dumb transports discover what refs are + available in this repository. If the repository is + published for dumb transports, this file should be + regenerated by `git update-server-info` every time a tag + or branch is created or modified. This is normally done + from the `hooks/update` hook, which is run by the + `git-receive-pack` command when you `git push` into the + repository. + +info/grafts:: + This file records fake commit ancestry information, to + pretend the set of parents a commit has is different + from how the commit was actually created. One record + per line describes a commit and its fake parents by + listing their 40-byte hexadecimal object names separated + by a space and terminated by a newline. + +info/exclude:: + This file, by convention among Porcelains, stores the + exclude pattern list. `.gitignore` is the per-directory + ignore file. `git status`, `git add`, `git rm` and `git + clean` look at it but the core git commands do not look + at it. See also: linkgit:gitignore[5]. + +remotes:: + Stores shorthands to be used to give URL and default + refnames to interact with remote repository to `git + fetch`, `git pull` and `git push` commands. + +logs:: + Records of changes made to refs are stored in this + directory. See the documentation on git-update-ref + for more information. + +logs/refs/heads/`name`:: + Records all changes made to the branch tip named `name`. + +logs/refs/tags/`name`:: + Records all changes made to the tag named `name`. + +shallow:: + This is similar to `info/grafts` but is internally used + and maintained by shallow clone mechanism. See `--depth` + option to linkgit:git-clone[1] and linkgit:git-fetch[1]. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt new file mode 100644 index 0000000..a8138e2 --- /dev/null +++ b/Documentation/rev-list-options.txt @@ -0,0 +1,361 @@ +Commit Formatting +~~~~~~~~~~~~~~~~~ + +ifdef::git-rev-list[] +Using these options, linkgit:git-rev-list[1] will act similar to the +more specialized family of commit log tools: linkgit:git-log[1], +linkgit:git-show[1], and linkgit:git-whatchanged[1] +endif::git-rev-list[] + +include::pretty-options.txt[] + +--relative-date:: + + Synonym for `--date=relative`. + +--date={relative,local,default,iso,rfc}:: + + Only takes effect for dates shown in human-readable format, such + as when using "--pretty". ++ +`--date=relative` shows dates relative to the current time, +e.g. "2 hours ago". ++ +`--date=local` shows timestamps in user's local timezone. ++ +`--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. ++ +`--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 +format, often found in E-mail messages. ++ +`--date=short` shows only date but not time, in `YYYY-MM-DD` format. ++ +`--date=default` shows timestamps in the original timezone +(either committer's or author's). + +--header:: + + Print the contents of the commit in raw-format; each record is + separated with a NUL character. + +--parents:: + + Print the parents of the commit. + +--timestamp:: + Print the raw commit timestamp. + +--left-right:: + + Mark which side of a symmetric diff a commit is reachable from. + Commits from the left side are prefixed with `<` and those from + the right with `>`. If combined with `--boundary`, those + commits are prefixed with `-`. ++ +For example, if you have this topology: ++ +----------------------------------------------------------------------- + y---b---b branch B + / \ / + / . + / / \ + o---x---a---a branch A +----------------------------------------------------------------------- ++ +you would get an output line this: ++ +----------------------------------------------------------------------- + $ git rev-list --left-right --boundary --pretty=oneline A...B + + >bbbbbbb... 3rd on b + >bbbbbbb... 2nd on b + <aaaaaaa... 3rd on a + <aaaaaaa... 2nd on a + -yyyyyyy... 1st on b + -xxxxxxx... 1st on a +----------------------------------------------------------------------- + +Diff Formatting +~~~~~~~~~~~~~~~ + +Below are listed options that control the formatting of diff output. +Some of them are specific to linkgit:git-rev-list[1], however other diff +options may be given. See linkgit:git-diff-files[1] for more options. + +-c:: + + This flag changes the way a merge commit is displayed. It shows + the differences from each of the parents to the merge result + simultaneously instead of showing pairwise diff between a parent + and the result one at a time. Furthermore, it lists only files + which were modified from all parents. + +--cc:: + + This flag implies the '-c' options and further compresses the + patch output by omitting hunks that show differences from only + one parent, or show the same change from all but one parent for + an Octopus merge. + +-r:: + + Show recursive diffs. + +-t:: + + Show the tree objects in the diff output. This implies '-r'. + +Commit Limiting +~~~~~~~~~~~~~~~ + +Besides specifying a range of commits that should be listed using the +special notations explained in the description, additional commit +limiting may be applied. + +-- + +-n 'number', --max-count='number':: + + Limit the number of commits output. + +--skip='number':: + + Skip 'number' commits before starting to show the commit output. + +--since='date', --after='date':: + + Show commits more recent than a specific date. + +--until='date', --before='date':: + + Show commits older than a specific date. + +--max-age='timestamp', --min-age='timestamp':: + + Limit the commits output to specified time range. + +--author='pattern', --committer='pattern':: + + Limit the commits output to ones with author/committer + header lines that match the specified pattern (regular expression). + +--grep='pattern':: + + Limit the commits output to ones with log message that + matches the specified pattern (regular expression). + +-i, --regexp-ignore-case:: + + Match the regexp limiting patterns without regard to letters case. + +-E, --extended-regexp:: + + Consider the limiting patterns to be extended regular expressions + instead of the default basic regular expressions. + +--remove-empty:: + + Stop when a given path disappears from the tree. + +--full-history:: + + Show also parts of history irrelevant to current state of a given + path. This turns off history simplification, which removed merges + which didn't change anything at all at some child. It will still actually + simplify away merges that didn't change anything at all into either + child. + +--no-merges:: + + Do not print commits with more than one parent. + +--first-parent:: + Follow only the first parent commit upon seeing a merge + commit. This option can give a better overview when + viewing the evolution of a particular topic branch, + because merges into a topic branch tend to be only about + adjusting to updated upstream from time to time, and + this option allows you to ignore the individual commits + brought in to your history by such a merge. + +--not:: + + Reverses the meaning of the '{caret}' prefix (or lack thereof) + for all following revision specifiers, up to the next '--not'. + +--all:: + + Pretend as if all the refs in `$GIT_DIR/refs/` are listed on the + command line as '<commit>'. + +--stdin:: + + In addition to the '<commit>' listed on the command + line, read them from the standard input. + +--quiet:: + + Don't print anything to standard output. This form + is primarily meant to allow the caller to + test the exit status to see if a range of objects is fully + connected (or not). It is faster than redirecting stdout + to /dev/null as the output does not have to be formatted. + +--cherry-pick:: + + Omit any commit that introduces the same change as + another commit on the "other side" when the set of + commits are limited with symmetric difference. ++ +For example, if you have two branches, `A` and `B`, a usual way +to list all commits on only one side of them is with +`--left-right`, like the example above in the description of +that option. It however shows the commits that were cherry-picked +from the other branch (for example, "3rd on b" may be cherry-picked +from branch A). With this option, such pairs of commits are +excluded from the output. + +-g, --walk-reflogs:: + + Instead of walking the commit ancestry chain, walk + reflog entries from the most recent one to older ones. + When this option is used you cannot specify commits to + exclude (that is, '{caret}commit', 'commit1..commit2', + nor 'commit1...commit2' notations cannot be used). ++ +With '\--pretty' format other than oneline (for obvious reasons), +this causes the output to have two extra lines of information +taken from the reflog. By default, 'commit@\{Nth}' notation is +used in the output. When the starting commit is specified as +'commit@{now}', output also uses 'commit@\{timestamp}' notation +instead. Under '\--pretty=oneline', the commit message is +prefixed with this information on the same line. + +Cannot be combined with '\--reverse'. +See also linkgit:git-reflog[1]. + +--merge:: + + After a failed merge, show refs that touch files having a + conflict and don't exist on all heads to merge. + +--boundary:: + + Output uninteresting commits at the boundary, which are usually + not shown. + +--dense, --sparse:: + +When optional paths are given, the default behaviour ('--dense') is to +only output commits that changes at least one of them, and also ignore +merges that do not touch the given paths. + +Use the '--sparse' flag to makes the command output all eligible commits +(still subject to count and age limitation), but apply merge +simplification nevertheless. + +ifdef::git-rev-list[] +--bisect:: + +Limit output to the one commit object which is roughly halfway between +the included and excluded commits. Thus, if + +----------------------------------------------------------------------- + $ git-rev-list --bisect foo ^bar ^baz +----------------------------------------------------------------------- + +outputs 'midpoint', the output of the two commands + +----------------------------------------------------------------------- + $ git-rev-list foo ^midpoint + $ git-rev-list midpoint ^bar ^baz +----------------------------------------------------------------------- + +would be of roughly the same length. Finding the change which +introduces a regression is thus reduced to a binary search: repeatedly +generate and test new 'midpoint's until the commit chain is of length +one. + +--bisect-vars:: + +This calculates the same as `--bisect`, but outputs text ready +to be eval'ed by the shell. These lines will assign the name of +the midpoint revision to the variable `bisect_rev`, and the +expected number of commits to be tested after `bisect_rev` is +tested to `bisect_nr`, the expected number of commits to be +tested if `bisect_rev` turns out to be good to `bisect_good`, +the expected number of commits to be tested if `bisect_rev` +turns out to be bad to `bisect_bad`, and the number of commits +we are bisecting right now to `bisect_all`. + +--bisect-all:: + +This outputs all the commit objects between the included and excluded +commits, ordered by their distance to the included and excluded +commits. The farthest from them is displayed first. (This is the only +one displayed by `--bisect`.) + +This is useful because it makes it easy to choose a good commit to +test when you want to avoid to test some of them for some reason (they +may not compile for example). + +This option can be used along with `--bisect-vars`, in this case, +after all the sorted commit objects, there will be the same text as if +`--bisect-vars` had been used alone. +endif::git-rev-list[] + +-- + +Commit Ordering +~~~~~~~~~~~~~~~ + +By default, the commits are shown in reverse chronological order. + +--topo-order:: + + This option makes them appear in topological order (i.e. + descendant commits are shown before their parents). + +--date-order:: + + This option is similar to '--topo-order' in the sense that no + parent comes before all of its children, but otherwise things + are still ordered in the commit timestamp order. + +--reverse:: + + Output the commits in reverse order. + Cannot be combined with '\--walk-reflogs'. + +Object Traversal +~~~~~~~~~~~~~~~~ + +These options are mostly targeted for packing of git repositories. + +--objects:: + + Print the object IDs of any object referenced by the listed + commits. '--objects foo ^bar' thus means "send me + all object IDs which I need to download if I have the commit + object 'bar', but not 'foo'". + +--objects-edge:: + + Similar to '--objects', but also print the IDs of excluded + commits prefixed with a "-" character. This is used by + linkgit:git-pack-objects[1] to build "thin" pack, which records + objects in deltified form based on objects contained in these + excluded commits to reduce network traffic. + +--unpacked:: + + Only useful with '--objects'; print the object IDs that are not + in packs. + +--no-walk:: + + Only show the given revs, but do not traverse their ancestors. + +--do-walk:: + + Overrides a previous --no-walk. diff --git a/Documentation/technical/.gitignore b/Documentation/technical/.gitignore new file mode 100644 index 0000000..8aa891d --- /dev/null +++ b/Documentation/technical/.gitignore @@ -0,0 +1 @@ +api-index.txt diff --git a/Documentation/technical/api-allocation-growing.txt b/Documentation/technical/api-allocation-growing.txt new file mode 100644 index 0000000..43dbe09 --- /dev/null +++ b/Documentation/technical/api-allocation-growing.txt @@ -0,0 +1,34 @@ +allocation growing API +====================== + +Dynamically growing an array using realloc() is error prone and boring. + +Define your array with: + +* a pointer (`ary`) that points at the array, initialized to `NULL`; + +* an integer variable (`alloc`) that keeps track of how big the current + allocation is, initialized to `0`; + +* another integer variable (`nr`) to keep track of how many elements the + array currently has, initialized to `0`. + +Then before adding `n`th element to the array, call `ALLOC_GROW(ary, n, +alloc)`. This ensures that the array can hold at least `n` elements by +calling `realloc(3)` and adjusting `alloc` variable. + +------------ +sometype *ary; +size_t nr; +size_t alloc + +for (i = 0; i < nr; i++) + if (we like ary[i] already) + return; + +/* we did not like any existing one, so add one */ +ALLOC_GROW(ary, nr + 1, alloc); +ary[nr++] = value you like; +------------ + +You are responsible for updating the `nr` variable. diff --git a/Documentation/technical/api-builtin.txt b/Documentation/technical/api-builtin.txt new file mode 100644 index 0000000..52cdb4c --- /dev/null +++ b/Documentation/technical/api-builtin.txt @@ -0,0 +1,63 @@ +builtin API +=========== + +Adding a new built-in +--------------------- + +There are 4 things to do to add a bulit-in command implementation to +git: + +. Define the implementation of the built-in command `foo` with + signature: + + int cmd_foo(int argc, const char **argv, const char *prefix); + +. Add the external declaration for the function to `builtin.h`. + +. Add the command to `commands[]` table in `handle_internal_command()`, + defined in `git.c`. The entry should look like: + + { "foo", cmd_foo, <options> }, + + where options is the bitwise-or of: + +`RUN_SETUP`:: + + Make sure there is a git directory to work on, and if there is a + work tree, chdir to the top of it if the command was invoked + in a subdirectory. If there is no work tree, no chdir() is + done. + +`USE_PAGER`:: + + If the standard output is connected to a tty, spawn a pager and + feed our output to it. + +. Add `builtin-foo.o` to `BUILTIN_OBJS` in `Makefile`. + +Additionally, if `foo` is a new command, there are 3 more things to do: + +. Add tests to `t/` directory. + +. Write documentation in `Documentation/git-foo.txt`. + +. Add an entry for `git-foo` to the list at the end of + `Documentation/cmd-list.perl`. + + +How a built-in is called +------------------------ + +The implementation `cmd_foo()` takes three parameters, `argc`, `argv, +and `prefix`. The first two are similar to what `main()` of a +standalone command would be called with. + +When `RUN_SETUP` is specified in the `commands[]` table, and when you +were started from a subdirectory of the work tree, `cmd_foo()` is called +after chdir(2) to the top of the work tree, and `prefix` gets the path +to the subdirectory the command started from. This allows you to +convert a user-supplied pathname (typically relative to that directory) +to a pathname relative to the top of the work tree. + +The return value from `cmd_foo()` becomes the exit status of the +command. diff --git a/Documentation/technical/api-decorate.txt b/Documentation/technical/api-decorate.txt new file mode 100644 index 0000000..1d52a6c --- /dev/null +++ b/Documentation/technical/api-decorate.txt @@ -0,0 +1,6 @@ +decorate API +============ + +Talk about <decorate.h> + +(Linus) diff --git a/Documentation/technical/api-diff.txt b/Documentation/technical/api-diff.txt new file mode 100644 index 0000000..20b0241 --- /dev/null +++ b/Documentation/technical/api-diff.txt @@ -0,0 +1,166 @@ +diff API +======== + +The diff API is for programs that compare two sets of files (e.g. two +trees, one tree and the index) and present the found difference in +various ways. The calling program is responsible for feeding the API +pairs of files, one from the "old" set and the corresponding one from +"new" set, that are different. The library called through this API is +called diffcore, and is responsible for two things. + +* finding total rewrites (`-B`), renames (`-M`) and copies (`-C`), and + changes that touch a string (`-S`), as specified by the caller. + +* outputting the differences in various formats, as specified by the + caller. + +Calling sequence +---------------- + +* Prepare `struct diff_options` to record the set of diff options, and + then call `diff_setup()` to initialize this structure. This sets up + the vanilla default. + +* Fill in the options structure to specify desired output format, rename + detection, etc. `diff_opt_parse()` can be used to parse options given + from the command line in a way consistent with existing git-diff + family of programs. + +* Call `diff_setup_done()`; this inspects the options set up so far for + internal consistency and make necessary tweaking to it (e.g. if + textual patch output was asked, recursive behaviour is turned on). + +* As you find different pairs of files, call `diff_change()` to feed + modified files, `diff_addremove()` to feed created or deleted files, + or `diff_unmerged()` to feed a file whose state is 'unmerged' to the + API. These are thin wrappers to a lower-level `diff_queue()` function + that is flexible enough to record any of these kinds of changes. + +* Once you finish feeding the pairs of files, call `diffcore_std()`. + This will tell the diffcore library to go ahead and do its work. + +* Calling `diff_flush()` will produce the output. + + +Data structures +--------------- + +* `struct diff_filespec` + +This is the internal representation for a single file (blob). It +records the blob object name (if known -- for a work tree file it +typically is a NUL SHA-1), filemode and pathname. This is what the +`diff_addremove()`, `diff_change()` and `diff_unmerged()` synthesize and +feed `diff_queue()` function with. + +* `struct diff_filepair` + +This records a pair of `struct diff_filespec`; the filespec for a file +in the "old" set (i.e. preimage) is called `one`, and the filespec for a +file in the "new" set (i.e. postimage) is called `two`. A change that +represents file creation has NULL in `one`, and file deletion has NULL +in `two`. + +A `filepair` starts pointing at `one` and `two` that are from the same +filename, but `diffcore_std()` can break pairs and match component +filespecs with other filespecs from a different filepair to form new +filepair. This is called 'rename detection'. + +* `struct diff_queue` + +This is a collection of filepairs. Notable members are: + +`queue`:: + + An array of pointers to `struct diff_filepair`. This + dynamically grows as you add filepairs; + +`alloc`:: + + The allocated size of the `queue` array; + +`nr`:: + + The number of elements in the `queue` array. + + +* `struct diff_options` + +This describes the set of options the calling program wants to affect +the operation of diffcore library with. + +Notable members are: + +`output_format`:: + The output format used when `diff_flush()` is run. + +`context`:: + Number of context lines to generate in patch output. + +`break_opt`, `detect_rename`, `rename-score`, `rename_limit`:: + Affects the way detection logic for complete rewrites, renames + and copies. + +`abbrev`:: + Number of hexdigits to abbreviate raw format output to. + +`pickaxe`:: + A constant string (can and typically does contain newlines to + look for a block of text, not just a single line) to filter out + the filepairs that do not change the number of strings contained + in its preimage and postimage of the diff_queue. + +`flags`:: + This is mostly a collection of boolean options that affects the + operation, but some do not have anything to do with the diffcore + library. + +BINARY, TEXT;; + Affects the way how a file that is seemingly binary is treated. + +FULL_INDEX;; + Tells the patch output format not to use abbreviated object + names on the "index" lines. + +FIND_COPIES_HARDER;; + Tells the diffcore library that the caller is feeding unchanged + filepairs to allow copies from unmodified files be detected. + +COLOR_DIFF;; + Output should be colored. + +COLOR_DIFF_WORDS;; + Output is a colored word-diff. + +NO_INDEX;; + Tells diff-files that the input is not tracked files but files + in random locations on the filesystem. + +ALLOW_EXTERNAL;; + Tells output routine that it is Ok to call user specified patch + output routine. Plumbing disables this to ensure stable output. + +QUIET;; + Do not show any output. + +REVERSE_DIFF;; + Tells the library that the calling program is feeding the + filepairs reversed; `one` is two, and `two` is one. + +EXIT_WITH_STATUS;; + For communication between the calling program and the options + parser; tell the calling program to signal the presence of + difference using program exit code. + +HAS_CHANGES;; + Internal; used for optimization to see if there is any change. + +SILENT_ON_REMOVE;; + Affects if diff-files shows removed files. + +RECURSIVE, TREE_IN_RECURSIVE;; + Tells if tree traversal done by tree-diff should recursively + descend into a tree object pair that are different in preimage + and postimage set. + +(JC) diff --git a/Documentation/technical/api-directory-listing.txt b/Documentation/technical/api-directory-listing.txt new file mode 100644 index 0000000..5bbd18f --- /dev/null +++ b/Documentation/technical/api-directory-listing.txt @@ -0,0 +1,76 @@ +directory listing API +===================== + +The directory listing API is used to enumerate paths in the work tree, +optionally taking `.git/info/exclude` and `.gitignore` files per +directory into account. + +Data structure +-------------- + +`struct dir_struct` structure is used to pass directory traversal +options to the library and to record the paths discovered. The notable +options are: + +`exclude_per_dir`:: + + The name of the file to be read in each directory for excluded + files (typically `.gitignore`). + +`collect_ignored`:: + + Include paths that are to be excluded in the result. + +`show_ignored`:: + + The traversal is for finding just ignored files, not unignored + files. + +`show_other_directories`:: + + Include a directory that is not tracked. + +`hide_empty_directories`:: + + Do not include a directory that is not tracked and is empty. + +`no_gitlinks`:: + + If set, recurse into a directory that looks like a git + directory. Otherwise it is shown as a directory. + +The result of the enumeration is left in these fields:: + +`entries[]`:: + + An array of `struct dir_entry`, each element of which describes + a path. + +`nr`:: + + The number of members in `entries[]` array. + +`alloc`:: + + Internal use; keeps track of allocation of `entries[]` array. + + +Calling sequence +---------------- + +* Prepare `struct dir_struct dir` and clear it with `memset(&dir, 0, + sizeof(dir))`. + +* Call `add_exclude()` to add single exclude pattern, + `add_excludes_from_file()` to add patterns from a file + (e.g. `.git/info/exclude`), and/or set `dir.exclude_per_dir`. A + short-hand function `setup_standard_excludes()` can be used to set up + the standard set of exclude settings. + +* Set options described in the Data Structure section above. + +* Call `read_directory()`. + +* Use `dir.entries[]`. + +(JC) diff --git a/Documentation/technical/api-gitattributes.txt b/Documentation/technical/api-gitattributes.txt new file mode 100644 index 0000000..9d97eaa --- /dev/null +++ b/Documentation/technical/api-gitattributes.txt @@ -0,0 +1,111 @@ +gitattributes API +================= + +gitattributes mechanism gives a uniform way to associate various +attributes to set of paths. + + +Data Structure +-------------- + +`struct git_attr`:: + + An attribute is an opaque object that is identified by its name. + Pass the name and its length to `git_attr()` function to obtain + the object of this type. The internal representation of this + structure is of no interest to the calling programs. + +`struct git_attr_check`:: + + This structure represents a set of attributes to check in a call + to `git_checkattr()` function, and receives the results. + + +Calling Sequence +---------------- + +* Prepare an array of `struct git_attr_check` to define the list of + attributes you would want to check. To populate this array, you would + need to define necessary attributes by calling `git_attr()` function. + +* Call git_checkattr() to check the attributes for the path. + +* Inspect `git_attr_check` structure to see how each of the attribute in + the array is defined for the path. + + +Attribute Values +---------------- + +An attribute for a path can be in one of four states: Set, Unset, +Unspecified or set to a string, and `.value` member of `struct +git_attr_check` records it. There are three macros to check these: + +`ATTR_TRUE()`:: + + Returns true if the attribute is Set for the path. + +`ATTR_FALSE()`:: + + Returns true if the attribute is Unset for the path. + +`ATTR_UNSET()`:: + + Returns true if the attribute is Unspecified for the path. + +If none of the above returns true, `.value` member points at a string +value of the attribute for the path. + + +Example +------- + +To see how attributes "crlf" and "indent" are set for different paths. + +. Prepare an array of `struct git_attr_check` with two elements (because + we are checking two attributes). Initialize their `attr` member with + pointers to `struct git_attr` obtained by calling `git_attr()`: + +------------ +static struct git_attr_check check[2]; +static void setup_check(void) +{ + if (check[0].attr) + return; /* already done */ + check[0].attr = git_attr("crlf", 4); + check[1].attr = git_attr("ident", 5); +} +------------ + +. Call `git_checkattr()` with the prepared array of `struct git_attr_check`: + +------------ + const char *path; + + setup_check(); + git_checkattr(path, ARRAY_SIZE(check), check); +------------ + +. Act on `.value` member of the result, left in `check[]`: + +------------ + const char *value = check[0].value; + + if (ATTR_TRUE(value)) { + The attribute is Set, by listing only the name of the + attribute in the gitattributes file for the path. + } else if (ATTR_FALSE(value)) { + The attribute is Unset, by listing the name of the + attribute prefixed with a dash - for the path. + } else if (ATTR_UNSET(value)) { + The attribute is not set nor unset for the path. + } else if (!strcmp(value, "input")) { + If none of ATTR_TRUE(), ATTR_FALSE(), or ATTR_UNSET() is + true, the value is a string set in the gitattributes + file for the path by saying "attr=value". + } else if (... other check using value as string ...) { + ... + } +------------ + +(JC) diff --git a/Documentation/technical/api-grep.txt b/Documentation/technical/api-grep.txt new file mode 100644 index 0000000..a69cc89 --- /dev/null +++ b/Documentation/technical/api-grep.txt @@ -0,0 +1,8 @@ +grep API +======== + +Talk about <grep.h>, things like: + +* grep_buffer() + +(JC) diff --git a/Documentation/technical/api-hash.txt b/Documentation/technical/api-hash.txt new file mode 100644 index 0000000..c784d3e --- /dev/null +++ b/Documentation/technical/api-hash.txt @@ -0,0 +1,6 @@ +hash API +======== + +Talk about <hash.h> + +(Linus) diff --git a/Documentation/technical/api-in-core-index.txt b/Documentation/technical/api-in-core-index.txt new file mode 100644 index 0000000..adbdbf5 --- /dev/null +++ b/Documentation/technical/api-in-core-index.txt @@ -0,0 +1,21 @@ +in-core index API +================= + +Talk about <read-cache.c> and <cache-tree.c>, things like: + +* cache -> the_index macros +* read_index() +* write_index() +* ie_match_stat() and ie_modified(); how they are different and when to + use which. +* index_name_pos() +* remove_index_entry_at() +* remove_file_from_index() +* add_file_to_index() +* add_index_entry() +* refresh_index() +* discard_index() +* cache_tree_invalidate_path() +* cache_tree_update() + +(JC, Linus) diff --git a/Documentation/technical/api-index-skel.txt b/Documentation/technical/api-index-skel.txt new file mode 100644 index 0000000..af7cc2e --- /dev/null +++ b/Documentation/technical/api-index-skel.txt @@ -0,0 +1,15 @@ +GIT API Documents +================= + +GIT has grown a set of internal API over time. This collection +documents them. + +//////////////////////////////////////////////////////////////// +// table of contents begin +//////////////////////////////////////////////////////////////// + +//////////////////////////////////////////////////////////////// +// table of contents end +//////////////////////////////////////////////////////////////// + +2007-11-24 diff --git a/Documentation/technical/api-index.sh b/Documentation/technical/api-index.sh new file mode 100755 index 0000000..9c3f413 --- /dev/null +++ b/Documentation/technical/api-index.sh @@ -0,0 +1,28 @@ +#!/bin/sh + +( + c=//////////////////////////////////////////////////////////////// + skel=api-index-skel.txt + sed -e '/^\/\/ table of contents begin/q' "$skel" + echo "$c" + + ls api-*.txt | + while read filename + do + case "$filename" in + api-index-skel.txt | api-index.txt) continue ;; + esac + title=$(sed -e 1q "$filename") + html=${filename%.txt}.html + echo "* link:$html[$title]" + done + echo "$c" + sed -n -e '/^\/\/ table of contents end/,$p' "$skel" +) >api-index.txt+ + +if test -f api-index.txt && cmp api-index.txt api-index.txt+ >/dev/null +then + rm -f api-index.txt+ +else + mv api-index.txt+ api-index.txt +fi diff --git a/Documentation/technical/api-lockfile.txt b/Documentation/technical/api-lockfile.txt new file mode 100644 index 0000000..dd89404 --- /dev/null +++ b/Documentation/technical/api-lockfile.txt @@ -0,0 +1,74 @@ +lockfile API +============ + +The lockfile API serves two purposes: + +* Mutual exclusion. When we write out a new index file, first + we create a new file `$GIT_DIR/index.lock`, write the new + contents into it, and rename it to the final destination + `$GIT_DIR/index`. We try to create the `$GIT_DIR/index.lock` + file with O_EXCL so that we can notice and fail when somebody + else is already trying to update the index file. + +* Automatic cruft removal. After we create the "lock" file, we + may decide to `die()`, and we would want to make sure that we + remove the file that has not been committed to its final + destination. This is done by remembering the lockfiles we + created in a linked list and cleaning them up from an + `atexit(3)` handler. Outstanding lockfiles are also removed + when the program dies on a signal. + + +The functions +------------- + +hold_lock_file_for_update:: + + Take a pointer to `struct lock_file`, the filename of + the final destination (e.g. `$GIT_DIR/index`) and a flag + `die_on_error`. Attempt to create a lockfile for the + destination and return the file descriptor for writing + to the file. If `die_on_error` flag is true, it dies if + a lock is already taken for the file; otherwise it + returns a negative integer to the caller on failure. + +commit_lock_file:: + + Take a pointer to the `struct lock_file` initialized + with an earlier call to `hold_lock_file_for_update()`, + close the file descriptor and rename the lockfile to its + final destination. Returns 0 upon success, a negative + value on failure to close(2) or rename(2). + +rollback_lock_file:: + + Take a pointer to the `struct lock_file` initialized + with an earlier call to `hold_lock_file_for_update()`, + close the file descriptor and remove the lockfile. + +close_lock_file:: + Take a pointer to the `struct lock_file` initialized + with an earlier call to `hold_lock_file_for_update()`, + and close the file descriptor. Returns 0 upon success, + a negative value on failure to close(2). + +Because the structure is used in an `atexit(3)` handler, its +storage has to stay throughout the life of the program. It +cannot be an auto variable allocated on the stack. + +Call `commit_lock_file()` or `rollback_lock_file()` when you are +done writing to the file descriptor. If you do not call either +and simply `exit(3)` from the program, an `atexit(3)` handler +will close and remove the lockfile. + +If you need to close the file descriptor you obtained from +`hold_lock_file_for_update` function yourself, do so by calling +`close_lock_file()`. You should never call `close(2)` yourself! +Otherwise the `struct +lock_file` structure still remembers that the file descriptor +needs to be closed, and a later call to `commit_lock_file()` or +`rollback_lock_file()` will result in duplicate calls to +`close(2)`. Worse yet, if you `close(2)`, open another file +descriptor for completely different purpose, and then call +`commit_lock_file()` or `rollback_lock_file()`, they may close +that unrelated file descriptor. diff --git a/Documentation/technical/api-object-access.txt b/Documentation/technical/api-object-access.txt new file mode 100644 index 0000000..03bb0e9 --- /dev/null +++ b/Documentation/technical/api-object-access.txt @@ -0,0 +1,15 @@ +object access API +================= + +Talk about <sha1_file.c> and <object.h> family, things like + +* read_sha1_file() +* read_object_with_reference() +* has_sha1_file() +* write_sha1_file() +* pretend_sha1_file() +* lookup_{object,commit,tag,blob,tree} +* parse_{object,commit,tag,blob,tree} +* Use of object flags + +(JC, Shawn, Daniel, Dscho, Linus) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt new file mode 100644 index 0000000..b7cda94 --- /dev/null +++ b/Documentation/technical/api-parse-options.txt @@ -0,0 +1,6 @@ +parse-options API +================= + +Talk about <parse-options.h> + +(Pierre) diff --git a/Documentation/technical/api-path-list.txt b/Documentation/technical/api-path-list.txt new file mode 100644 index 0000000..d077683 --- /dev/null +++ b/Documentation/technical/api-path-list.txt @@ -0,0 +1,9 @@ +path-list API +============= + +Talk about <path-list.h>, things like + +* it is not just paths but strings in general; +* the calling sequence. + +(Dscho) diff --git a/Documentation/technical/api-quote.txt b/Documentation/technical/api-quote.txt new file mode 100644 index 0000000..e8a1bce --- /dev/null +++ b/Documentation/technical/api-quote.txt @@ -0,0 +1,10 @@ +quote API +========= + +Talk about <quote.h>, things like + +* sq_quote and unquote +* c_style quote and unquote +* quoting for foreign languages + +(JC) diff --git a/Documentation/technical/api-revision-walking.txt b/Documentation/technical/api-revision-walking.txt new file mode 100644 index 0000000..01a2455 --- /dev/null +++ b/Documentation/technical/api-revision-walking.txt @@ -0,0 +1,9 @@ +revision walking API +==================== + +Talk about <revision.h>, things like: + +* two diff_options, one for path limiting, another for output; +* calling sequence: init_revisions(), setup_revsions(), get_revision(); + +(Linus, JC, Dscho) diff --git a/Documentation/technical/api-run-command.txt b/Documentation/technical/api-run-command.txt new file mode 100644 index 0000000..19d2f64 --- /dev/null +++ b/Documentation/technical/api-run-command.txt @@ -0,0 +1,10 @@ +run-command API +=============== + +Talk about <run-command.h>, and things like: + +* Environment the command runs with (e.g. GIT_DIR); +* File descriptors and pipes; +* Exit status; + +(Hannes, Dscho, Shawn) diff --git a/Documentation/technical/api-setup.txt b/Documentation/technical/api-setup.txt new file mode 100644 index 0000000..4f63a04 --- /dev/null +++ b/Documentation/technical/api-setup.txt @@ -0,0 +1,13 @@ +setup API +========= + +Talk about + +* setup_git_directory() +* setup_git_directory_gently() +* is_inside_git_dir() +* is_inside_work_tree() +* setup_work_tree() +* get_pathspec() + +(Dscho) diff --git a/Documentation/technical/api-strbuf.txt b/Documentation/technical/api-strbuf.txt new file mode 100644 index 0000000..a52e4f3 --- /dev/null +++ b/Documentation/technical/api-strbuf.txt @@ -0,0 +1,6 @@ +strbuf API +========== + +Talk about <strbuf.h> + +(Pierre, JC) diff --git a/Documentation/technical/api-tree-walking.txt b/Documentation/technical/api-tree-walking.txt new file mode 100644 index 0000000..e3ddf91 --- /dev/null +++ b/Documentation/technical/api-tree-walking.txt @@ -0,0 +1,12 @@ +tree walking API +================ + +Talk about <tree-walk.h>, things like + +* struct tree_desc +* init_tree_desc +* tree_entry_extract +* update_tree_entry +* get_tree_entry + +(JC, Linus) diff --git a/Documentation/technical/api-xdiff-interface.txt b/Documentation/technical/api-xdiff-interface.txt new file mode 100644 index 0000000..6296eca --- /dev/null +++ b/Documentation/technical/api-xdiff-interface.txt @@ -0,0 +1,7 @@ +xdiff interface API +=================== + +Talk about our calling convention to xdiff library, including +xdiff_emit_consume_fn. + +(Dscho, JC) diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt new file mode 100644 index 0000000..aa87756 --- /dev/null +++ b/Documentation/technical/pack-format.txt @@ -0,0 +1,146 @@ +GIT pack format +=============== + += pack-*.pack files have the following format: + + - A header appears at the beginning and consists of the following: + + 4-byte signature: + The signature is: {'P', 'A', 'C', 'K'} + + 4-byte version number (network byte order): + GIT currently accepts version number 2 or 3 but + generates version 2 only. + + 4-byte number of objects contained in the pack (network byte order) + + Observation: we cannot have more than 4G versions ;-) and + more than 4G objects in a pack. + + - The header is followed by number of object entries, each of + which looks like this: + + (undeltified representation) + n-byte type and length (3-bit type, (n-1)*7+4-bit length) + compressed data + + (deltified representation) + n-byte type and length (3-bit type, (n-1)*7+4-bit length) + 20-byte base object name + compressed delta data + + Observation: length of each object is encoded in a variable + length format and is not constrained to 32-bit or anything. + + - The trailer records 20-byte SHA1 checksum of all of the above. + += Original (version 1) pack-*.idx files have the following format: + + - The header consists of 256 4-byte network byte order + integers. N-th entry of this table records the number of + objects in the corresponding pack, the first byte of whose + object name is less than or equal to N. This is called the + 'first-level fan-out' table. + + - The header is followed by sorted 24-byte entries, one entry + per object in the pack. Each entry is: + + 4-byte network byte order integer, recording where the + object is stored in the packfile as the offset from the + beginning. + + 20-byte object name. + + - The file is concluded with a trailer: + + A copy of the 20-byte SHA1 checksum at the end of + corresponding packfile. + + 20-byte SHA1-checksum of all of the above. + +Pack Idx file: + + -- +--------------------------------+ +fanout | fanout[0] = 2 (for example) |-. +table +--------------------------------+ | + | fanout[1] | | + +--------------------------------+ | + | fanout[2] | | + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | + | fanout[255] = total objects |---. + -- +--------------------------------+ | | +main | offset | | | +index | object name 00XXXXXXXXXXXXXXXX | | | +table +--------------------------------+ | | + | offset | | | + | object name 00XXXXXXXXXXXXXXXX | | | + +--------------------------------+<+ | + .-| offset | | + | | object name 01XXXXXXXXXXXXXXXX | | + | +--------------------------------+ | + | | offset | | + | | object name 01XXXXXXXXXXXXXXXX | | + | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | + | | offset | | + | | object name FFXXXXXXXXXXXXXXXX | | + --| +--------------------------------+<--+ +trailer | | packfile checksum | + | +--------------------------------+ + | | idxfile checksum | + | +--------------------------------+ + .-------. + | +Pack file entry: <+ + + packed object header: + 1-byte size extension bit (MSB) + type (next 3 bit) + size0 (lower 4-bit) + n-byte sizeN (as long as MSB is set, each 7-bit) + size0..sizeN form 4+7+7+..+7 bit integer, size0 + is the least significant part, and sizeN is the + most significant part. + packed object data: + If it is not DELTA, then deflated bytes (the size above + is the size before compression). + If it is DELTA, then + 20-byte base object name SHA1 (the size above is the + size of the delta data that follows). + delta data, deflated. + + += Version 2 pack-*.idx files support packs larger than 4 GiB, and + have some other reorganizations. They have the format: + + - A 4-byte magic number '\377tOc' which is an unreasonable + fanout[0] value. + + - A 4-byte version number (= 2) + + - A 256-entry fan-out table just like v1. + + - A table of sorted 20-byte SHA1 object names. These are + packed together without offset values to reduce the cache + footprint of the binary search for a specific object name. + + - A table of 4-byte CRC32 values of the packed object data. + This is new in v2 so compressed data can be copied directly + from pack to pack during repacking without undetected + data corruption. + + - A table of 4-byte offset values (in network byte order). + These are usually 31-bit pack file offsets, but large + offsets are encoded as an index into the next table with + the msbit set. + + - A table of 8-byte offset entries (empty for pack files less + than 2 GiB). Pack files are organized with heavily used + objects toward the front, so most object references should + not need to refer to this table. + + - The same trailer as a v1 pack file: + + A copy of the 20-byte SHA1 checksum at the end of + corresponding packfile. + + 20-byte SHA1-checksum of all of the above. diff --git a/Documentation/technical/pack-heuristics.txt b/Documentation/technical/pack-heuristics.txt new file mode 100644 index 0000000..103eb5d --- /dev/null +++ b/Documentation/technical/pack-heuristics.txt @@ -0,0 +1,466 @@ + Concerning Git's Packing Heuristics + =================================== + + Oh, here's a really stupid question: + + Where do I go + to learn the details + of git's packing heuristics? + +Be careful what you ask! + +Followers of the git, please open the git IRC Log and turn to +February 10, 2006. + +It's a rare occasion, and we are joined by the King Git Himself, +Linus Torvalds (linus). Nathaniel Smith, (njs`), has the floor +and seeks enlightenment. Others are present, but silent. + +Let's listen in! + + <njs`> Oh, here's a really stupid question -- where do I go to + learn the details of git's packing heuristics? google avails + me not, reading the source didn't help a lot, and wading + through the whole mailing list seems less efficient than any + of that. + +It is a bold start! A plea for help combined with a simultaneous +tri-part attack on some of the tried and true mainstays in the quest +for enlightenment. Brash accusations of google being useless. Hubris! +Maligning the source. Heresy! Disdain for the mailing list archives. +Woe. + + <pasky> yes, the packing-related delta stuff is somewhat + mysterious even for me ;) + +Ah! Modesty after all. + + <linus> njs, I don't think the docs exist. That's something where + I don't think anybody else than me even really got involved. + Most of the rest of git others have been busy with (especially + Junio), but packing nobody touched after I did it. + +It's cryptic, yet vague. Linus in style for sure. Wise men +interpret this as an apology. A few argue it is merely a +statement of fact. + + <njs`> I guess the next step is "read the source again", but I + have to build up a certain level of gumption first :-) + +Indeed! On both points. + + <linus> The packing heuristic is actually really really simple. + +Bait... + + <linus> But strange. + +And switch. That ought to do it! + + <linus> Remember: git really doesn't follow files. So what it does is + - generate a list of all objects + - sort the list according to magic heuristics + - walk the list, using a sliding window, seeing if an object + can be diffed against another object in the window + - write out the list in recency order + +The traditional understatement: + + <njs`> I suspect that what I'm missing is the precise definition of + the word "magic" + +The traditional insight: + + <pasky> yes + +And Babel-like confusion flowed. + + <njs`> oh, hmm, and I'm not sure what this sliding window means either + + <pasky> iirc, it appeared to me to be just the sha1 of the object + when reading the code casually ... + + ... which simply doesn't sound as a very good heuristics, though ;) + + <njs`> .....and recency order. okay, I think it's clear I didn't + even realize how much I wasn't realizing :-) + +Ah, grasshopper! And thus the enlightenment begins anew. + + <linus> The "magic" is actually in theory totally arbitrary. + ANY order will give you a working pack, but no, it's not + ordered by SHA1. + + Before talking about the ordering for the sliding delta + window, let's talk about the recency order. That's more + important in one way. + + <njs`> Right, but if all you want is a working way to pack things + together, you could just use cat and save yourself some + trouble... + +Waaait for it.... + + <linus> The recency ordering (which is basically: put objects + _physically_ into the pack in the order that they are + "reachable" from the head) is important. + + <njs`> okay + + <linus> It's important because that's the thing that gives packs + good locality. It keeps the objects close to the head (whether + they are old or new, but they are _reachable_ from the head) + at the head of the pack. So packs actually have absolutely + _wonderful_ IO patterns. + +Read that again, because it is important. + + <linus> But recency ordering is totally useless for deciding how + to actually generate the deltas, so the delta ordering is + something else. + + The delta ordering is (wait for it): + - first sort by the "basename" of the object, as defined by + the name the object was _first_ reached through when + generating the object list + - within the same basename, sort by size of the object + - but always sort different types separately (commits first). + + That's not exactly it, but it's very close. + + <njs`> The "_first_ reached" thing is not too important, just you + need some way to break ties since the same objects may be + reachable many ways, yes? + +And as if to clarify: + + <linus> The point is that it's all really just any random + heuristic, and the ordering is totally unimportant for + correctness, but it helps a lot if the heuristic gives + "clumping" for things that are likely to delta well against + each other. + +It is an important point, so secretly, I did my own research and have +included my results below. To be fair, it has changed some over time. +And through the magic of Revisionistic History, I draw upon this entry +from The Git IRC Logs on my father's birthday, March 1: + + <gitster> The quote from the above linus should be rewritten a + bit (wait for it): + - first sort by type. Different objects never delta with + each other. + - then sort by filename/dirname. hash of the basename + occupies the top BITS_PER_INT-DIR_BITS bits, and bottom + DIR_BITS are for the hash of leading path elements. + - then if we are doing "thin" pack, the objects we are _not_ + going to pack but we know about are sorted earlier than + other objects. + - and finally sort by size, larger to smaller. + +In one swell-foop, clarification and obscurification! Nonetheless, +authoritative. Cryptic, yet concise. It even solicits notions of +quotes from The Source Code. Clearly, more study is needed. + + <gitster> That's the sort order. What this means is: + - we do not delta different object types. + - we prefer to delta the objects with the same full path, but + allow files with the same name from different directories. + - we always prefer to delta against objects we are not going + to send, if there are some. + - we prefer to delta against larger objects, so that we have + lots of removals. + + The penultimate rule is for "thin" packs. It is used when + the other side is known to have such objects. + +There it is again. "Thin" packs. I'm thinking to myself, "What +is a 'thin' pack?" So I ask: + + <jdl> What is a "thin" pack? + + <gitster> Use of --objects-edge to rev-list as the upstream of + pack-objects. The pack transfer protocol negotiates that. + +Woo hoo! Cleared that _right_ up! + + <gitster> There are two directions - push and fetch. + +There! Did you see it? It is not '"push" and "pull"'! How often the +confusion has started here. So casually mentioned, too! + + <gitster> For push, git-send-pack invokes git-receive-pack on the + other end. The receive-pack says "I have up to these commits". + send-pack looks at them, and computes what are missing from + the other end. So "thin" could be the default there. + + In the other direction, fetch, git-fetch-pack and + git-clone-pack invokes git-upload-pack on the other end + (via ssh or by talking to the daemon). + + There are two cases: fetch-pack with -k and clone-pack is one, + fetch-pack without -k is the other. clone-pack and fetch-pack + with -k will keep the downloaded packfile without expanded, so + we do not use thin pack transfer. Otherwise, the generated + pack will have delta without base object in the same pack. + + But fetch-pack without -k will explode the received pack into + individual objects, so we automatically ask upload-pack to + give us a thin pack if upload-pack supports it. + +OK then. + +Uh. + +Let's return to the previous conversation still in progress. + + <njs`> and "basename" means something like "the tail of end of + path of file objects and dir objects, as per basename(3), and + we just declare all commit and tag objects to have the same + basename" or something? + +Luckily, that too is a point that gitster clarified for us! + +If I might add, the trick is to make files that _might_ be similar be +located close to each other in the hash buckets based on their file +names. It used to be that "foo/Makefile", "bar/baz/quux/Makefile" and +"Makefile" all landed in the same bucket due to their common basename, +"Makefile". However, now they land in "close" buckets. + +The algorithm allows not just for the _same_ bucket, but for _close_ +buckets to be considered delta candidates. The rationale is +essentially that files, like Makefiles, often have very similar +content no matter what directory they live in. + + <linus> I played around with different delta algorithms, and with + making the "delta window" bigger, but having too big of a + sliding window makes it very expensive to generate the pack: + you need to compare every object with a _ton_ of other objects. + + There are a number of other trivial heuristics too, which + basically boil down to "don't bother even trying to delta this + pair" if we can tell before-hand that the delta isn't worth it + (due to size differences, where we can take a previous delta + result into account to decide that "ok, no point in trying + that one, it will be worse"). + + End result: packing is actually very size efficient. It's + somewhat CPU-wasteful, but on the other hand, since you're + really only supposed to do it maybe once a month (and you can + do it during the night), nobody really seems to care. + +Nice Engineering Touch, there. Find when it doesn't matter, and +proclaim it a non-issue. Good style too! + + <njs`> So, just to repeat to see if I'm following, we start by + getting a list of the objects we want to pack, we sort it by + this heuristic (basically lexicographically on the tuple + (type, basename, size)). + + Then we walk through this list, and calculate a delta of + each object against the last n (tunable parameter) objects, + and pick the smallest of these deltas. + +Vastly simplified, but the essence is there! + + <linus> Correct. + + <njs`> And then once we have picked a delta or fulltext to + represent each object, we re-sort by recency, and write them + out in that order. + + <linus> Yup. Some other small details: + +And of course there is the "Other Shoe" Factor too. + + <linus> - We limit the delta depth to another magic value (right + now both the window and delta depth magic values are just "10") + + <njs`> Hrm, my intuition is that you'd end up with really _bad_ IO + patterns, because the things you want are near by, but to + actually reconstruct them you may have to jump all over in + random ways. + + <linus> - When we write out a delta, and we haven't yet written + out the object it is a delta against, we write out the base + object first. And no, when we reconstruct them, we actually + get nice IO patterns, because: + - larger objects tend to be "more recent" (Linus' law: files grow) + - we actively try to generate deltas from a larger object to a + smaller one + - this means that the top-of-tree very seldom has deltas + (i.e. deltas in _practice_ are "backwards deltas") + +Again, we should reread that whole paragraph. Not just because +Linus has slipped Linus's Law in there on us, but because it is +important. Let's make sure we clarify some of the points here: + + <njs`> So the point is just that in practice, delta order and + recency order match each other quite well. + + <linus> Yes. There's another nice side to this (and yes, it was + designed that way ;): + - the reason we generate deltas against the larger object is + actually a big space saver too! + + <njs`> Hmm, but your last comment (if "we haven't yet written out + the object it is a delta against, we write out the base object + first"), seems like it would make these facts mostly + irrelevant because even if in practice you would not have to + wander around much, in fact you just brute-force say that in + the cases where you might have to wander, don't do that :-) + + <linus> Yes and no. Notice the rule: we only write out the base + object first if the delta against it was more recent. That + means that you can actually have deltas that refer to a base + object that is _not_ close to the delta object, but that only + happens when the delta is needed to generate an _old_ object. + + <linus> See? + +Yeah, no. I missed that on the first two or three readings myself. + + <linus> This keeps the front of the pack dense. The front of the + pack never contains data that isn't relevant to a "recent" + object. The size optimization comes from our use of xdelta + (but is true for many other delta algorithms): removing data + is cheaper (in size) than adding data. + + When you remove data, you only need to say "copy bytes n--m". + In contrast, in a delta that _adds_ data, you have to say "add + these bytes: 'actual data goes here'" + + *** njs` has quit: Read error: 104 (Connection reset by peer) + + <linus> Uhhuh. I hope I didn't blow njs` mind. + + *** njs` has joined channel #git + + <pasky> :) + +The silent observers are amused. Of course. + +And as if njs` was expected to be omniscient: + + <linus> njs - did you miss anything? + +OK, I'll spell it out. That's Geek Humor. If njs` was not actually +connected for a little bit there, how would he know if missed anything +while he was disconnected? He's a benevolent dictator with a sense of +humor! Well noted! + + <njs`> Stupid router. Or gremlins, or whatever. + +It's a cheap shot at Cisco. Take 'em when you can. + + <njs`> Yes and no. Notice the rule: we only write out the base + object first if the delta against it was more recent. + + I'm getting lost in all these orders, let me re-read :-) + So the write-out order is from most recent to least recent? + (Conceivably it could be the opposite way too, I'm not sure if + we've said) though my connection back at home is logging, so I + can just read what you said there :-) + +And for those of you paying attention, the Omniscient Trick has just +been detailed! + + <linus> Yes, we always write out most recent first + +For the other record: + + <pasky> njs`: http://pastebin.com/547965 + +The 'net never forgets, so that should be good until the end of time. + + <njs`> And, yeah, I got the part about deeper-in-history stuff + having worse IO characteristics, one sort of doesn't care. + + <linus> With the caveat that if the "most recent" needs an older + object to delta against (hey, shrinking sometimes does + happen), we write out the old object with the delta. + + <njs`> (if only it happened more...) + + <linus> Anyway, the pack-file could easily be denser still, but + because it's used both for streaming (the git protocol) and + for on-disk, it has a few pessimizations. + +Actually, it is a made-up word. But it is a made-up word being +used as setup for a later optimization, which is a real word: + + <linus> In particular, while the pack-file is then compressed, + it's compressed just one object at a time, so the actual + compression factor is less than it could be in theory. But it + means that it's all nice random-access with a simple index to + do "object name->location in packfile" translation. + + <njs`> I'm assuming the real win for delta-ing large->small is + more homogeneous statistics for gzip to run over? + + (You have to put the bytes in one place or another, but + putting them in a larger blob wins on compression) + + Actually, what is the compression strategy -- each delta + individually gzipped, the whole file gzipped, somewhere in + between, no compression at all, ....? + + Right. + +Reality IRC sets in. For example: + + <pasky> I'll read the rest in the morning, I really have to go + sleep or there's no hope whatsoever for me at the today's + exam... g'nite all. + +Heh. + + <linus> pasky: g'nite + + <njs`> pasky: 'luck + + <linus> Right: large->small matters exactly because of compression + behaviour. If it was non-compressed, it probably wouldn't make + any difference. + + <njs`> yeah + + <linus> Anyway: I'm not even trying to claim that the pack-files + are perfect, but they do tend to have a nice balance of + density vs ease-of use. + +Gasp! OK, saved. That's a fair Engineering trade off. Close call! +In fact, Linus reflects on some Basic Engineering Fundamentals, +design options, etc. + + <linus> More importantly, they allow git to still _conceptually_ + never deal with deltas at all, and be a "whole object" store. + + Which has some problems (we discussed bad huge-file + behaviour on the git lists the other day), but it does mean + that the basic git concepts are really really simple and + straightforward. + + It's all been quite stable. + + Which I think is very much a result of having very simple + basic ideas, so that there's never any confusion about what's + going on. + + Bugs happen, but they are "simple" bugs. And bugs that + actually get some object store detail wrong are almost always + so obvious that they never go anywhere. + + <njs`> Yeah. + +Nuff said. + + <linus> Anyway. I'm off for bed. It's not 6AM here, but I've got + three kids, and have to get up early in the morning to send + them off. I need my beauty sleep. + + <njs`> :-) + + <njs`> appreciate the infodump, I really was failing to find the + details on git packs :-) + +And now you know the rest of the story. diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt new file mode 100644 index 0000000..9cd48b4 --- /dev/null +++ b/Documentation/technical/pack-protocol.txt @@ -0,0 +1,41 @@ +Pack transfer protocols +======================= + +There are two Pack push-pull protocols. + +upload-pack (S) | fetch/clone-pack (C) protocol: + + # Tell the puller what commits we have and what their names are + S: SHA1 name + S: ... + S: SHA1 name + S: # flush -- it's your turn + # Tell the pusher what commits we want, and what we have + C: want name + C: .. + C: want name + C: have SHA1 + C: have SHA1 + C: ... + C: # flush -- occasionally ask "had enough?" + S: NAK + C: have SHA1 + C: ... + C: have SHA1 + S: ACK + C: done + S: XXXXXXX -- packfile contents. + +send-pack | receive-pack protocol. + + # Tell the pusher what commits we have and what their names are + C: SHA1 name + C: ... + C: SHA1 name + C: # flush -- it's your turn + # Tell the puller what the pusher has + S: old-SHA1 new-SHA1 name + S: old-SHA1 new-SHA1 name + S: ... + S: # flush -- done with the list + S: XXXXXXX --- packfile contents. diff --git a/Documentation/technical/racy-git.txt b/Documentation/technical/racy-git.txt new file mode 100644 index 0000000..6bdf034 --- /dev/null +++ b/Documentation/technical/racy-git.txt @@ -0,0 +1,195 @@ +Use of index and Racy git problem +================================= + +Background +---------- + +The index is one of the most important data structures in git. +It represents a virtual working tree state by recording list of +paths and their object names and serves as a staging area to +write out the next tree object to be committed. The state is +"virtual" in the sense that it does not necessarily have to, and +often does not, match the files in the working tree. + +There are cases git needs to examine the differences between the +virtual working tree state in the index and the files in the +working tree. The most obvious case is when the user asks `git +diff` (or its low level implementation, `git diff-files`) or +`git-ls-files --modified`. In addition, git internally checks +if the files in the working tree are different from what are +recorded in the index to avoid stomping on local changes in them +during patch application, switching branches, and merging. + +In order to speed up this comparison between the files in the +working tree and the index entries, the index entries record the +information obtained from the filesystem via `lstat(2)` system +call when they were last updated. When checking if they differ, +git first runs `lstat(2)` on the files and compares the result +with this information (this is what was originally done by the +`ce_match_stat()` function, but the current code does it in +`ce_match_stat_basic()` function). If some of these "cached +stat information" fields do not match, git can tell that the +files are modified without even looking at their contents. + +Note: not all members in `struct stat` obtained via `lstat(2)` +are used for this comparison. For example, `st_atime` obviously +is not useful. Currently, git compares the file type (regular +files vs symbolic links) and executable bits (only for regular +files) from `st_mode` member, `st_mtime` and `st_ctime` +timestamps, `st_uid`, `st_gid`, `st_ino`, and `st_size` members. +With a `USE_STDEV` compile-time option, `st_dev` is also +compared, but this is not enabled by default because this member +is not stable on network filesystems. With `USE_NSEC` +compile-time option, `st_mtim.tv_nsec` and `st_ctim.tv_nsec` +members are also compared, but this is not enabled by default +because the value of this member becomes meaningless once the +inode is evicted from the inode cache on filesystems that do not +store it on disk. + + +Racy git +-------- + +There is one slight problem with the optimization based on the +cached stat information. Consider this sequence: + + : modify 'foo' + $ git update-index 'foo' + : modify 'foo' again, in-place, without changing its size + +The first `update-index` computes the object name of the +contents of file `foo` and updates the index entry for `foo` +along with the `struct stat` information. If the modification +that follows it happens very fast so that the file's `st_mtime` +timestamp does not change, after this sequence, the cached stat +information the index entry records still exactly match what you +would see in the filesystem, even though the file `foo` is now +different. +This way, git can incorrectly think files in the working tree +are unmodified even though they actually are. This is called +the "racy git" problem (discovered by Pasky), and the entries +that appear clean when they may not be because of this problem +are called "racily clean". + +To avoid this problem, git does two things: + +. When the cached stat information says the file has not been + modified, and the `st_mtime` is the same as (or newer than) + the timestamp of the index file itself (which is the time `git + update-index foo` finished running in the above example), it + also compares the contents with the object registered in the + index entry to make sure they match. + +. When the index file is updated that contains racily clean + entries, cached `st_size` information is truncated to zero + before writing a new version of the index file. + +Because the index file itself is written after collecting all +the stat information from updated paths, `st_mtime` timestamp of +it is usually the same as or newer than any of the paths the +index contains. And no matter how quick the modification that +follows `git update-index foo` finishes, the resulting +`st_mtime` timestamp on `foo` cannot get a value earlier +than the index file. Therefore, index entries that can be +racily clean are limited to the ones that have the same +timestamp as the index file itself. + +The callers that want to check if an index entry matches the +corresponding file in the working tree continue to call +`ce_match_stat()`, but with this change, `ce_match_stat()` uses +`ce_modified_check_fs()` to see if racily clean ones are +actually clean after comparing the cached stat information using +`ce_match_stat_basic()`. + +The problem the latter solves is this sequence: + + $ git update-index 'foo' + : modify 'foo' in-place without changing its size + : wait for enough time + $ git update-index 'bar' + +Without the latter, the timestamp of the index file gets a newer +value, and falsely clean entry `foo` would not be caught by the +timestamp comparison check done with the former logic anymore. +The latter makes sure that the cached stat information for `foo` +would never match with the file in the working tree, so later +checks by `ce_match_stat_basic()` would report that the index entry +does not match the file and git does not have to fall back on more +expensive `ce_modified_check_fs()`. + + +Runtime penalty +--------------- + +The runtime penalty of falling back to `ce_modified_check_fs()` +from `ce_match_stat()` can be very expensive when there are many +racily clean entries. An obvious way to artificially create +this situation is to give the same timestamp to all the files in +the working tree in a large project, run `git update-index` on +them, and give the same timestamp to the index file: + + $ date >.datestamp + $ git ls-files | xargs touch -r .datestamp + $ git ls-files | git update-index --stdin + $ touch -r .datestamp .git/index + +This will make all index entries racily clean. The linux-2.6 +project, for example, there are over 20,000 files in the working +tree. On my Athron 64X2 3800+, after the above: + + $ /usr/bin/time git diff-files + 1.68user 0.54system 0:02.22elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k + 0inputs+0outputs (0major+67111minor)pagefaults 0swaps + $ git update-index MAINTAINERS + $ /usr/bin/time git diff-files + 0.02user 0.12system 0:00.14elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k + 0inputs+0outputs (0major+935minor)pagefaults 0swaps + +Running `git update-index` in the middle checked the racily +clean entries, and left the cached `st_mtime` for all the paths +intact because they were actually clean (so this step took about +the same amount of time as the first `git diff-files`). After +that, they are not racily clean anymore but are truly clean, so +the second invocation of `git diff-files` fully took advantage +of the cached stat information. + + +Avoiding runtime penalty +------------------------ + +In order to avoid the above runtime penalty, post 1.4.2 git used +to have a code that made sure the index file +got timestamp newer than the youngest files in the index when +there are many young files with the same timestamp as the +resulting index file would otherwise would have by waiting +before finishing writing the index file out. + +I suspected that in practice the situation where many paths in the +index are all racily clean was quite rare. The only code paths +that can record recent timestamp for large number of paths are: + +. Initial `git add .` of a large project. + +. `git checkout` of a large project from an empty index into an + unpopulated working tree. + +Note: switching branches with `git checkout` keeps the cached +stat information of existing working tree files that are the +same between the current branch and the new branch, which are +all older than the resulting index file, and they will not +become racily clean. Only the files that are actually checked +out can become racily clean. + +In a large project where raciness avoidance cost really matters, +however, the initial computation of all object names in the +index takes more than one second, and the index file is written +out after all that happens. Therefore the timestamp of the +index file will be more than one seconds later than the +youngest file in the working tree. This means that in these +cases there actually will not be any racily clean entry in +the resulting index. + +Based on this discussion, the current code does not use the +"workaround" to avoid the runtime penalty that does not exist in +practice anymore. This was done with commit 0fc82cff on Aug 15, +2006. diff --git a/Documentation/technical/send-pack-pipeline.txt b/Documentation/technical/send-pack-pipeline.txt new file mode 100644 index 0000000..681efe4 --- /dev/null +++ b/Documentation/technical/send-pack-pipeline.txt @@ -0,0 +1,63 @@ +git-send-pack +============= + +Overall operation +----------------- + +. Connects to the remote side and invokes git-receive-pack. + +. Learns what refs the remote has and what commit they point at. + Matches them to the refspecs we are pushing. + +. Checks if there are non-fast-forwards. Unlike fetch-pack, + the repository send-pack runs in is supposed to be a superset + of the recipient in fast-forward cases, so there is no need + for want/have exchanges, and fast-forward check can be done + locally. Tell the result to the other end. + +. Calls pack_objects() which generates a packfile and sends it + over to the other end. + +. If the remote side is new enough (v1.1.0 or later), wait for + the unpack and hook status from the other end. + +. Exit with appropriate error codes. + + +Pack_objects pipeline +--------------------- + +This function gets one file descriptor (`fd`) which is either a +socket (over the network) or a pipe (local). What's written to +this fd goes to git-receive-pack to be unpacked. + + send-pack ---> fd ---> receive-pack + +The function pack_objects creates a pipe and then forks. The +forked child execs pack-objects with --revs to receive revision +parameters from its standard input. This process will write the +packfile to the other end. + + send-pack + | + pack_objects() ---> fd ---> receive-pack + | ^ (pipe) + v | + (child) + +The child dup2's to arrange its standard output to go back to +the other end, and read its standard input to come from the +pipe. After that it exec's pack-objects. On the other hand, +the parent process, before starting to feed the child pipeline, +closes the reading side of the pipe and fd to receive-pack. + + send-pack + | + pack_objects(parent) + | + v [0] + pack-objects [0] ---> receive-pack + + +[jc: the pipeline was much more complex and needed documentation before + I understood an earlier bug, but now it is trivial and straightforward.] diff --git a/Documentation/technical/shallow.txt b/Documentation/technical/shallow.txt new file mode 100644 index 0000000..559263a --- /dev/null +++ b/Documentation/technical/shallow.txt @@ -0,0 +1,49 @@ +Def.: Shallow commits do have parents, but not in the shallow +repo, and therefore grafts are introduced pretending that +these commits have no parents. + +The basic idea is to write the SHA1s of shallow commits into +$GIT_DIR/shallow, and handle its contents like the contents +of $GIT_DIR/info/grafts (with the difference that shallow +cannot contain parent information). + +This information is stored in a new file instead of grafts, or +even the config, since the user should not touch that file +at all (even throughout development of the shallow clone, it +was never manually edited!). + +Each line contains exactly one SHA1. When read, a commit_graft +will be constructed, which has nr_parent < 0 to make it easier +to discern from user provided grafts. + +Since fsck-objects relies on the library to read the objects, +it honours shallow commits automatically. + +There are some unfinished ends of the whole shallow business: + +- maybe we have to force non-thin packs when fetching into a + shallow repo (ATM they are forced non-thin). + +- A special handling of a shallow upstream is needed. At some + stage, upload-pack has to check if it sends a shallow commit, + and it should send that information early (or fail, if the + client does not support shallow repositories). There is no + support at all for this in this patch series. + +- Instead of locking $GIT_DIR/shallow at the start, just + the timestamp of it is noted, and when it comes to writing it, + a check is performed if the mtime is still the same, dying if + it is not. + +- It is unclear how "push into/from a shallow repo" should behave. + +- If you deepen a history, you'd want to get the tags of the + newly stored (but older!) commits. This does not work right now. + +To make a shallow clone, you can call "git-clone --depth 20 repo". +The result contains only commit chains with a length of at most 20. +It also writes an appropriate $GIT_DIR/shallow. + +You can deepen a shallow repository with "git-fetch --depth 20 +repo branch", which will fetch branch from repo, but stop at depth +20, updating $GIT_DIR/shallow. diff --git a/Documentation/technical/trivial-merge.txt b/Documentation/technical/trivial-merge.txt new file mode 100644 index 0000000..24c8410 --- /dev/null +++ b/Documentation/technical/trivial-merge.txt @@ -0,0 +1,121 @@ +Trivial merge rules +=================== + +This document describes the outcomes of the trivial merge logic in read-tree. + +One-way merge +------------- + +This replaces the index with a different tree, keeping the stat info +for entries that don't change, and allowing -u to make the minimum +required changes to the working tree to have it match. + +Entries marked '+' have stat information. Spaces marked '*' don't +affect the result. + + index tree result + ----------------------- + * (empty) (empty) + (empty) tree tree + index+ tree tree + index+ index index+ + +Two-way merge +------------- + +It is permitted for the index to lack an entry; this does not prevent +any case from applying. + +If the index exists, it is an error for it not to match either the old +or the result. + +If multiple cases apply, the one used is listed first. + +A result which changes the index is an error if the index is not empty +and not up-to-date. + +Entries marked '+' have stat information. Spaces marked '*' don't +affect the result. + + case index old new result + ------------------------------------- + 0/2 (empty) * (empty) (empty) + 1/3 (empty) * new new + 4/5 index+ (empty) (empty) index+ + 6/7 index+ (empty) index index+ + 10 index+ index (empty) (empty) + 14/15 index+ old old index+ + 18/19 index+ old index index+ + 20 index+ index new new + +Three-way merge +--------------- + +It is permitted for the index to lack an entry; this does not prevent +any case from applying. + +If the index exists, it is an error for it not to match either the +head or (if the merge is trivial) the result. + +If multiple cases apply, the one used is listed first. + +A result of "no merge" means that index is left in stage 0, ancest in +stage 1, head in stage 2, and remote in stage 3 (if any of these are +empty, no entry is left for that stage). Otherwise, the given entry is +left in stage 0, and there are no other entries. + +A result of "no merge" is an error if the index is not empty and not +up-to-date. + +*empty* means that the tree must not have a directory-file conflict + with the entry. + +For multiple ancestors, a '+' means that this case applies even if +only one ancestor or remote fits; a '^' means all of the ancestors +must be the same. + +case ancest head remote result +---------------------------------------- +1 (empty)+ (empty) (empty) (empty) +2ALT (empty)+ *empty* remote remote +2 (empty)^ (empty) remote no merge +3ALT (empty)+ head *empty* head +3 (empty)^ head (empty) no merge +4 (empty)^ head remote no merge +5ALT * head head head +6 ancest+ (empty) (empty) no merge +8 ancest^ (empty) ancest no merge +7 ancest+ (empty) remote no merge +10 ancest^ ancest (empty) no merge +9 ancest+ head (empty) no merge +16 anc1/anc2 anc1 anc2 no merge +13 ancest+ head ancest head +14 ancest+ ancest remote remote +11 ancest+ head remote no merge + +Only #2ALT and #3ALT use *empty*, because these are the only cases +where there can be conflicts that didn't exist before. Note that we +allow directory-file conflicts between things in different stages +after the trivial merge. + +A possible alternative for #6 is (empty), which would make it like +#1. This is not used, due to the likelihood that it arises due to +moving the file to multiple different locations or moving and deleting +it in different branches. + +Case #1 is included for completeness, and also in case we decide to +put on '+' markings; any path that is never mentioned at all isn't +handled. + +Note that #16 is when both #13 and #14 apply; in this case, we refuse +the trivial merge, because we can't tell from this data which is +right. This is a case of a reverted patch (in some direction, maybe +multiple times), and the right answer depends on looking at crossings +of history or common ancestors of the ancestors. + +Note that, between #6, #7, #9, and #11, all cases not otherwise +covered are handled in this table. + +For #8 and #10, there is alternative behavior, not currently +implemented, where the result is (empty). As currently implemented, +the automatic merge will generally give this effect. diff --git a/Documentation/tutorial-2.txt b/Documentation/tutorial-2.txt new file mode 100644 index 0000000..7fac47d --- /dev/null +++ b/Documentation/tutorial-2.txt @@ -0,0 +1,406 @@ +A tutorial introduction to git: part two +======================================== + +You should work through link:tutorial.html[A tutorial introduction to +git] before reading this tutorial. + +The goal of this tutorial is to introduce two fundamental pieces of +git's architecture--the object database and the index file--and to +provide the reader with everything necessary to understand the rest +of the git documentation. + +The git object database +----------------------- + +Let's start a new project and create a small amount of history: + +------------------------------------------------ +$ mkdir test-project +$ cd test-project +$ git init +Initialized empty Git repository in .git/ +$ echo 'hello world' > file.txt +$ git add . +$ git commit -a -m "initial commit" +Created initial commit 54196cc2703dc165cbd373a65a4dcf22d50ae7f7 + create mode 100644 file.txt +$ echo 'hello world!' >file.txt +$ git commit -a -m "add emphasis" +Created commit c4d59f390b9cfd4318117afde11d601c1085f241 +------------------------------------------------ + +What are the 40 digits of hex that git responded to the commit with? + +We saw in part one of the tutorial that commits have names like this. +It turns out that every object in the git history is stored under +such a 40-digit hex name. That name is the SHA1 hash of the object's +contents; among other things, this ensures that git will never store +the same data twice (since identical data is given an identical SHA1 +name), and that the contents of a git object will never change (since +that would change the object's name as well). + +It is expected that the content of the commit object you created while +following the example above generates a different SHA1 hash than +the one shown above because the commit object records the time when +it was created and the name of the person performing the commit. + +We can ask git about this particular object with the cat-file +command. Don't copy the 40 hex digits from this example but use those +from your own version. Note that you can shorten it to only a few +characters to save yourself typing all 40 hex digits: + +------------------------------------------------ +$ git-cat-file -t 54196cc2 +commit +$ git-cat-file commit 54196cc2 +tree 92b8b694ffb1675e5975148e1121810081dbdffe +author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500 +committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500 + +initial commit +------------------------------------------------ + +A tree can refer to one or more "blob" objects, each corresponding to +a file. In addition, a tree can also refer to other tree objects, +thus creating a directory hierarchy. You can examine the contents of +any tree using ls-tree (remember that a long enough initial portion +of the SHA1 will also work): + +------------------------------------------------ +$ git ls-tree 92b8b694 +100644 blob 3b18e512dba79e4c8300dd08aeb37f8e728b8dad file.txt +------------------------------------------------ + +Thus we see that this tree has one file in it. The SHA1 hash is a +reference to that file's data: + +------------------------------------------------ +$ git cat-file -t 3b18e512 +blob +------------------------------------------------ + +A "blob" is just file data, which we can also examine with cat-file: + +------------------------------------------------ +$ git cat-file blob 3b18e512 +hello world +------------------------------------------------ + +Note that this is the old file data; so the object that git named in +its response to the initial tree was a tree with a snapshot of the +directory state that was recorded by the first commit. + +All of these objects are stored under their SHA1 names inside the git +directory: + +------------------------------------------------ +$ find .git/objects/ +.git/objects/ +.git/objects/pack +.git/objects/info +.git/objects/3b +.git/objects/3b/18e512dba79e4c8300dd08aeb37f8e728b8dad +.git/objects/92 +.git/objects/92/b8b694ffb1675e5975148e1121810081dbdffe +.git/objects/54 +.git/objects/54/196cc2703dc165cbd373a65a4dcf22d50ae7f7 +.git/objects/a0 +.git/objects/a0/423896973644771497bdc03eb99d5281615b51 +.git/objects/d0 +.git/objects/d0/492b368b66bdabf2ac1fd8c92b39d3db916e59 +.git/objects/c4 +.git/objects/c4/d59f390b9cfd4318117afde11d601c1085f241 +------------------------------------------------ + +and the contents of these files is just the compressed data plus a +header identifying their length and their type. The type is either a +blob, a tree, a commit, or a tag. + +The simplest commit to find is the HEAD commit, which we can find +from .git/HEAD: + +------------------------------------------------ +$ cat .git/HEAD +ref: refs/heads/master +------------------------------------------------ + +As you can see, this tells us which branch we're currently on, and it +tells us this by naming a file under the .git directory, which itself +contains a SHA1 name referring to a commit object, which we can +examine with cat-file: + +------------------------------------------------ +$ cat .git/refs/heads/master +c4d59f390b9cfd4318117afde11d601c1085f241 +$ git cat-file -t c4d59f39 +commit +$ git cat-file commit c4d59f39 +tree d0492b368b66bdabf2ac1fd8c92b39d3db916e59 +parent 54196cc2703dc165cbd373a65a4dcf22d50ae7f7 +author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143418702 -0500 +committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143418702 -0500 + +add emphasis +------------------------------------------------ + +The "tree" object here refers to the new state of the tree: + +------------------------------------------------ +$ git ls-tree d0492b36 +100644 blob a0423896973644771497bdc03eb99d5281615b51 file.txt +$ git cat-file blob a0423896 +hello world! +------------------------------------------------ + +and the "parent" object refers to the previous commit: + +------------------------------------------------ +$ git-cat-file commit 54196cc2 +tree 92b8b694ffb1675e5975148e1121810081dbdffe +author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500 +committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500 + +initial commit +------------------------------------------------ + +The tree object is the tree we examined first, and this commit is +unusual in that it lacks any parent. + +Most commits have only one parent, but it is also common for a commit +to have multiple parents. In that case the commit represents a +merge, with the parent references pointing to the heads of the merged +branches. + +Besides blobs, trees, and commits, the only remaining type of object +is a "tag", which we won't discuss here; refer to linkgit:git-tag[1] +for details. + +So now we know how git uses the object database to represent a +project's history: + + * "commit" objects refer to "tree" objects representing the + snapshot of a directory tree at a particular point in the + history, and refer to "parent" commits to show how they're + connected into the project history. + * "tree" objects represent the state of a single directory, + associating directory names to "blob" objects containing file + data and "tree" objects containing subdirectory information. + * "blob" objects contain file data without any other structure. + * References to commit objects at the head of each branch are + stored in files under .git/refs/heads/. + * The name of the current branch is stored in .git/HEAD. + +Note, by the way, that lots of commands take a tree as an argument. +But as we can see above, a tree can be referred to in many different +ways--by the SHA1 name for that tree, by the name of a commit that +refers to the tree, by the name of a branch whose head refers to that +tree, etc.--and most such commands can accept any of these names. + +In command synopses, the word "tree-ish" is sometimes used to +designate such an argument. + +The index file +-------------- + +The primary tool we've been using to create commits is "git commit +-a", which creates a commit including every change you've made to +your working tree. But what if you want to commit changes only to +certain files? Or only certain changes to certain files? + +If we look at the way commits are created under the cover, we'll see +that there are more flexible ways creating commits. + +Continuing with our test-project, let's modify file.txt again: + +------------------------------------------------ +$ echo "hello world, again" >>file.txt +------------------------------------------------ + +but this time instead of immediately making the commit, let's take an +intermediate step, and ask for diffs along the way to keep track of +what's happening: + +------------------------------------------------ +$ git diff +--- a/file.txt ++++ b/file.txt +@@ -1 +1,2 @@ + hello world! ++hello world, again +$ git add file.txt +$ git diff +------------------------------------------------ + +The last diff is empty, but no new commits have been made, and the +head still doesn't contain the new line: + +------------------------------------------------ +$ git-diff HEAD +diff --git a/file.txt b/file.txt +index a042389..513feba 100644 +--- a/file.txt ++++ b/file.txt +@@ -1 +1,2 @@ + hello world! ++hello world, again +------------------------------------------------ + +So "git diff" is comparing against something other than the head. +The thing that it's comparing against is actually the index file, +which is stored in .git/index in a binary format, but whose contents +we can examine with ls-files: + +------------------------------------------------ +$ git ls-files --stage +100644 513feba2e53ebbd2532419ded848ba19de88ba00 0 file.txt +$ git cat-file -t 513feba2 +blob +$ git cat-file blob 513feba2 +hello world! +hello world, again +------------------------------------------------ + +So what our "git add" did was store a new blob and then put +a reference to it in the index file. If we modify the file again, +we'll see that the new modifications are reflected in the "git-diff" +output: + +------------------------------------------------ +$ echo 'again?' >>file.txt +$ git diff +index 513feba..ba3da7b 100644 +--- a/file.txt ++++ b/file.txt +@@ -1,2 +1,3 @@ + hello world! + hello world, again ++again? +------------------------------------------------ + +With the right arguments, git diff can also show us the difference +between the working directory and the last commit, or between the +index and the last commit: + +------------------------------------------------ +$ git diff HEAD +diff --git a/file.txt b/file.txt +index a042389..ba3da7b 100644 +--- a/file.txt ++++ b/file.txt +@@ -1 +1,3 @@ + hello world! ++hello world, again ++again? +$ git diff --cached +diff --git a/file.txt b/file.txt +index a042389..513feba 100644 +--- a/file.txt ++++ b/file.txt +@@ -1 +1,2 @@ + hello world! ++hello world, again +------------------------------------------------ + +At any time, we can create a new commit using "git commit" (without +the -a option), and verify that the state committed only includes the +changes stored in the index file, not the additional change that is +still only in our working tree: + +------------------------------------------------ +$ git commit -m "repeat" +$ git diff HEAD +diff --git a/file.txt b/file.txt +index 513feba..ba3da7b 100644 +--- a/file.txt ++++ b/file.txt +@@ -1,2 +1,3 @@ + hello world! + hello world, again ++again? +------------------------------------------------ + +So by default "git commit" uses the index to create the commit, not +the working tree; the -a option to commit tells it to first update +the index with all changes in the working tree. + +Finally, it's worth looking at the effect of "git add" on the index +file: + +------------------------------------------------ +$ echo "goodbye, world" >closing.txt +$ git add closing.txt +------------------------------------------------ + +The effect of the "git add" was to add one entry to the index file: + +------------------------------------------------ +$ git ls-files --stage +100644 8b9743b20d4b15be3955fc8d5cd2b09cd2336138 0 closing.txt +100644 513feba2e53ebbd2532419ded848ba19de88ba00 0 file.txt +------------------------------------------------ + +And, as you can see with cat-file, this new entry refers to the +current contents of the file: + +------------------------------------------------ +$ git cat-file blob 8b9743b2 +goodbye, world +------------------------------------------------ + +The "status" command is a useful way to get a quick summary of the +situation: + +------------------------------------------------ +$ git status +# On branch master +# Changes to be committed: +# (use "git reset HEAD <file>..." to unstage) +# +# new file: closing.txt +# +# Changed but not updated: +# (use "git add <file>..." to update what will be committed) +# +# modified: file.txt +# +------------------------------------------------ + +Since the current state of closing.txt is cached in the index file, +it is listed as "Changes to be committed". Since file.txt has +changes in the working directory that aren't reflected in the index, +it is marked "changed but not updated". At this point, running "git +commit" would create a commit that added closing.txt (with its new +contents), but that didn't modify file.txt. + +Also, note that a bare "git diff" shows the changes to file.txt, but +not the addition of closing.txt, because the version of closing.txt +in the index file is identical to the one in the working directory. + +In addition to being the staging area for new commits, the index file +is also populated from the object database when checking out a +branch, and is used to hold the trees involved in a merge operation. +See the link:core-tutorial.html[core tutorial] and the relevant man +pages for details. + +What next? +---------- + +At this point you should know everything necessary to read the man +pages for any of the git commands; one good place to start would be +with the commands mentioned in link:everyday.html[Everyday git]. You +should be able to find any unknown jargon in the +link:glossary.html[Glossary]. + +The link:user-manual.html[Git User's Manual] provides a more +comprehensive introduction to git. + +The link:cvs-migration.html[CVS migration] document explains how to +import a CVS repository into git, and shows how to use git in a +CVS-like way. + +For some interesting examples of git use, see the +link:howto-index.html[howtos]. + +For git developers, the link:core-tutorial.html[Core tutorial] goes +into detail on the lower-level git mechanisms involved in, for +example, creating a new commit. diff --git a/Documentation/tutorial.txt b/Documentation/tutorial.txt new file mode 100644 index 0000000..e2bbda5 --- /dev/null +++ b/Documentation/tutorial.txt @@ -0,0 +1,584 @@ +A tutorial introduction to git (for version 1.5.1 or newer) +=========================================================== + +This tutorial explains how to import a new project into git, make +changes to it, and share changes with other developers. + +If you are instead primarily interested in using git to fetch a project, +for example, to test the latest version, you may prefer to start with +the first two chapters of link:user-manual.html[The Git User's Manual]. + +First, note that you can get documentation for a command such as "git +diff" with: + +------------------------------------------------ +$ man git-diff +------------------------------------------------ + +It is a good idea to introduce yourself to git with your name and +public email address before doing any operation. The easiest +way to do so is: + +------------------------------------------------ +$ git config --global user.name "Your Name Comes Here" +$ git config --global user.email you@yourdomain.example.com +------------------------------------------------ + + +Importing a new project +----------------------- + +Assume you have a tarball project.tar.gz with your initial work. You +can place it under git revision control as follows. + +------------------------------------------------ +$ tar xzf project.tar.gz +$ cd project +$ git init +------------------------------------------------ + +Git will reply + +------------------------------------------------ +Initialized empty Git repository in .git/ +------------------------------------------------ + +You've now initialized the working directory--you may notice a new +directory created, named ".git". + +Next, tell git to take a snapshot of the contents of all files under the +current directory (note the '.'), with linkgit:git-add[1]: + +------------------------------------------------ +$ git add . +------------------------------------------------ + +This snapshot is now stored in a temporary staging area which git calls +the "index". You can permanently store the contents of the index in the +repository with linkgit:git-commit[1]: + +------------------------------------------------ +$ git commit +------------------------------------------------ + +This will prompt you for a commit message. You've now stored the first +version of your project in git. + +Making changes +-------------- + +Modify some files, then add their updated contents to the index: + +------------------------------------------------ +$ git add file1 file2 file3 +------------------------------------------------ + +You are now ready to commit. You can see what is about to be committed +using linkgit:git-diff[1] with the --cached option: + +------------------------------------------------ +$ git diff --cached +------------------------------------------------ + +(Without --cached, linkgit:git-diff[1] will show you any changes that +you've made but not yet added to the index.) You can also get a brief +summary of the situation with linkgit:git-status[1]: + +------------------------------------------------ +$ git status +# On branch master +# Changes to be committed: +# (use "git reset HEAD <file>..." to unstage) +# +# modified: file1 +# modified: file2 +# modified: file3 +# +------------------------------------------------ + +If you need to make any further adjustments, do so now, and then add any +newly modified content to the index. Finally, commit your changes with: + +------------------------------------------------ +$ git commit +------------------------------------------------ + +This will again prompt your for a message describing the change, and then +record a new version of the project. + +Alternatively, instead of running `git add` beforehand, you can use + +------------------------------------------------ +$ git commit -a +------------------------------------------------ + +which will automatically notice any modified (but not new) files, add +them to the index, and commit, all in one step. + +A note on commit messages: Though not required, it's a good idea to +begin the commit message with a single short (less than 50 character) +line summarizing the change, followed by a blank line and then a more +thorough description. Tools that turn commits into email, for +example, use the first line on the Subject: line and the rest of the +commit in the body. + +Git tracks content not files +---------------------------- + +Many revision control systems provide an "add" command that tells the +system to start tracking changes to a new file. Git's "add" command +does something simpler and more powerful: `git add` is used both for new +and newly modified files, and in both cases it takes a snapshot of the +given files and stages that content in the index, ready for inclusion in +the next commit. + +Viewing project history +----------------------- + +At any point you can view the history of your changes using + +------------------------------------------------ +$ git log +------------------------------------------------ + +If you also want to see complete diffs at each step, use + +------------------------------------------------ +$ git log -p +------------------------------------------------ + +Often the overview of the change is useful to get a feel of +each step + +------------------------------------------------ +$ git log --stat --summary +------------------------------------------------ + +Managing branches +----------------- + +A single git repository can maintain multiple branches of +development. To create a new branch named "experimental", use + +------------------------------------------------ +$ git branch experimental +------------------------------------------------ + +If you now run + +------------------------------------------------ +$ git branch +------------------------------------------------ + +you'll get a list of all existing branches: + +------------------------------------------------ + experimental +* master +------------------------------------------------ + +The "experimental" branch is the one you just created, and the +"master" branch is a default branch that was created for you +automatically. The asterisk marks the branch you are currently on; +type + +------------------------------------------------ +$ git checkout experimental +------------------------------------------------ + +to switch to the experimental branch. Now edit a file, commit the +change, and switch back to the master branch: + +------------------------------------------------ +(edit file) +$ git commit -a +$ git checkout master +------------------------------------------------ + +Check that the change you made is no longer visible, since it was +made on the experimental branch and you're back on the master branch. + +You can make a different change on the master branch: + +------------------------------------------------ +(edit file) +$ git commit -a +------------------------------------------------ + +at this point the two branches have diverged, with different changes +made in each. To merge the changes made in experimental into master, run + +------------------------------------------------ +$ git merge experimental +------------------------------------------------ + +If the changes don't conflict, you're done. If there are conflicts, +markers will be left in the problematic files showing the conflict; + +------------------------------------------------ +$ git diff +------------------------------------------------ + +will show this. Once you've edited the files to resolve the +conflicts, + +------------------------------------------------ +$ git commit -a +------------------------------------------------ + +will commit the result of the merge. Finally, + +------------------------------------------------ +$ gitk +------------------------------------------------ + +will show a nice graphical representation of the resulting history. + +At this point you could delete the experimental branch with + +------------------------------------------------ +$ git branch -d experimental +------------------------------------------------ + +This command ensures that the changes in the experimental branch are +already in the current branch. + +If you develop on a branch crazy-idea, then regret it, you can always +delete the branch with + +------------------------------------- +$ git branch -D crazy-idea +------------------------------------- + +Branches are cheap and easy, so this is a good way to try something +out. + +Using git for collaboration +--------------------------- + +Suppose that Alice has started a new project with a git repository in +/home/alice/project, and that Bob, who has a home directory on the +same machine, wants to contribute. + +Bob begins with: + +------------------------------------------------ +$ git clone /home/alice/project myrepo +------------------------------------------------ + +This creates a new directory "myrepo" containing a clone of Alice's +repository. The clone is on an equal footing with the original +project, possessing its own copy of the original project's history. + +Bob then makes some changes and commits them: + +------------------------------------------------ +(edit files) +$ git commit -a +(repeat as necessary) +------------------------------------------------ + +When he's ready, he tells Alice to pull changes from the repository +at /home/bob/myrepo. She does this with: + +------------------------------------------------ +$ cd /home/alice/project +$ git pull /home/bob/myrepo master +------------------------------------------------ + +This merges the changes from Bob's "master" branch into Alice's +current branch. If Alice has made her own changes in the meantime, +then she may need to manually fix any conflicts. (Note that the +"master" argument in the above command is actually unnecessary, as it +is the default.) + +The "pull" command thus performs two operations: it fetches changes +from a remote branch, then merges them into the current branch. + +When you are working in a small closely knit group, it is not +unusual to interact with the same repository over and over +again. By defining 'remote' repository shorthand, you can make +it easier: + +------------------------------------------------ +$ git remote add bob /home/bob/myrepo +------------------------------------------------ + +With this, Alice can perform the first operation alone using the +"git fetch" command without merging them with her own branch, +using: + +------------------------------------- +$ git fetch bob +------------------------------------- + +Unlike the longhand form, when Alice fetches from Bob using a +remote repository shorthand set up with `git remote`, what was +fetched is stored in a remote tracking branch, in this case +`bob/master`. So after this: + +------------------------------------- +$ git log -p master..bob/master +------------------------------------- + +shows a list of all the changes that Bob made since he branched from +Alice's master branch. + +After examining those changes, Alice +could merge the changes into her master branch: + +------------------------------------- +$ git merge bob/master +------------------------------------- + +This `merge` can also be done by 'pulling from her own remote +tracking branch', like this: + +------------------------------------- +$ git pull . remotes/bob/master +------------------------------------- + +Note that git pull always merges into the current branch, +regardless of what else is given on the command line. + +Later, Bob can update his repo with Alice's latest changes using + +------------------------------------- +$ git pull +------------------------------------- + +Note that he doesn't need to give the path to Alice's repository; +when Bob cloned Alice's repository, git stored the location of her +repository in the repository configuration, and that location is +used for pulls: + +------------------------------------- +$ git config --get remote.origin.url +/home/alice/project +------------------------------------- + +(The complete configuration created by git-clone is visible using +"git config -l", and the linkgit:git-config[1] man page +explains the meaning of each option.) + +Git also keeps a pristine copy of Alice's master branch under the +name "origin/master": + +------------------------------------- +$ git branch -r + origin/master +------------------------------------- + +If Bob later decides to work from a different host, he can still +perform clones and pulls using the ssh protocol: + +------------------------------------- +$ git clone alice.org:/home/alice/project myrepo +------------------------------------- + +Alternatively, git has a native protocol, or can use rsync or http; +see linkgit:git-pull[1] for details. + +Git can also be used in a CVS-like mode, with a central repository +that various users push changes to; see linkgit:git-push[1] and +link:cvs-migration.html[git for CVS users]. + +Exploring history +----------------- + +Git history is represented as a series of interrelated commits. We +have already seen that the git log command can list those commits. +Note that first line of each git log entry also gives a name for the +commit: + +------------------------------------- +$ git log +commit c82a22c39cbc32576f64f5c6b3f24b99ea8149c7 +Author: Junio C Hamano <junkio@cox.net> +Date: Tue May 16 17:18:22 2006 -0700 + + merge-base: Clarify the comments on post processing. +------------------------------------- + +We can give this name to git show to see the details about this +commit. + +------------------------------------- +$ git show c82a22c39cbc32576f64f5c6b3f24b99ea8149c7 +------------------------------------- + +But there are other ways to refer to commits. You can use any initial +part of the name that is long enough to uniquely identify the commit: + +------------------------------------- +$ git show c82a22c39c # the first few characters of the name are + # usually enough +$ git show HEAD # the tip of the current branch +$ git show experimental # the tip of the "experimental" branch +------------------------------------- + +Every commit usually has one "parent" commit +which points to the previous state of the project: + +------------------------------------- +$ git show HEAD^ # to see the parent of HEAD +$ git show HEAD^^ # to see the grandparent of HEAD +$ git show HEAD~4 # to see the great-great grandparent of HEAD +------------------------------------- + +Note that merge commits may have more than one parent: + +------------------------------------- +$ git show HEAD^1 # show the first parent of HEAD (same as HEAD^) +$ git show HEAD^2 # show the second parent of HEAD +------------------------------------- + +You can also give commits names of your own; after running + +------------------------------------- +$ git-tag v2.5 1b2e1d63ff +------------------------------------- + +you can refer to 1b2e1d63ff by the name "v2.5". If you intend to +share this name with other people (for example, to identify a release +version), you should create a "tag" object, and perhaps sign it; see +linkgit:git-tag[1] for details. + +Any git command that needs to know a commit can take any of these +names. For example: + +------------------------------------- +$ git diff v2.5 HEAD # compare the current HEAD to v2.5 +$ git branch stable v2.5 # start a new branch named "stable" based + # at v2.5 +$ git reset --hard HEAD^ # reset your current branch and working + # directory to its state at HEAD^ +------------------------------------- + +Be careful with that last command: in addition to losing any changes +in the working directory, it will also remove all later commits from +this branch. If this branch is the only branch containing those +commits, they will be lost. Also, don't use "git reset" on a +publicly-visible branch that other developers pull from, as it will +force needless merges on other developers to clean up the history. +If you need to undo changes that you have pushed, use linkgit:git-revert[1] +instead. + +The git grep command can search for strings in any version of your +project, so + +------------------------------------- +$ git grep "hello" v2.5 +------------------------------------- + +searches for all occurrences of "hello" in v2.5. + +If you leave out the commit name, git grep will search any of the +files it manages in your current directory. So + +------------------------------------- +$ git grep "hello" +------------------------------------- + +is a quick way to search just the files that are tracked by git. + +Many git commands also take sets of commits, which can be specified +in a number of ways. Here are some examples with git log: + +------------------------------------- +$ git log v2.5..v2.6 # commits between v2.5 and v2.6 +$ git log v2.5.. # commits since v2.5 +$ git log --since="2 weeks ago" # commits from the last 2 weeks +$ git log v2.5.. Makefile # commits since v2.5 which modify + # Makefile +------------------------------------- + +You can also give git log a "range" of commits where the first is not +necessarily an ancestor of the second; for example, if the tips of +the branches "stable-release" and "master" diverged from a common +commit some time ago, then + +------------------------------------- +$ git log stable..experimental +------------------------------------- + +will list commits made in the experimental branch but not in the +stable branch, while + +------------------------------------- +$ git log experimental..stable +------------------------------------- + +will show the list of commits made on the stable branch but not +the experimental branch. + +The "git log" command has a weakness: it must present commits in a +list. When the history has lines of development that diverged and +then merged back together, the order in which "git log" presents +those commits is meaningless. + +Most projects with multiple contributors (such as the linux kernel, +or git itself) have frequent merges, and gitk does a better job of +visualizing their history. For example, + +------------------------------------- +$ gitk --since="2 weeks ago" drivers/ +------------------------------------- + +allows you to browse any commits from the last 2 weeks of commits +that modified files under the "drivers" directory. (Note: you can +adjust gitk's fonts by holding down the control key while pressing +"-" or "+".) + +Finally, most commands that take filenames will optionally allow you +to precede any filename by a commit, to specify a particular version +of the file: + +------------------------------------- +$ git diff v2.5:Makefile HEAD:Makefile.in +------------------------------------- + +You can also use "git show" to see any such file: + +------------------------------------- +$ git show v2.5:Makefile +------------------------------------- + +Next Steps +---------- + +This tutorial should be enough to perform basic distributed revision +control for your projects. However, to fully understand the depth +and power of git you need to understand two simple ideas on which it +is based: + + * The object database is the rather elegant system used to + store the history of your project--files, directories, and + commits. + + * The index file is a cache of the state of a directory tree, + used to create commits, check out working directories, and + hold the various trees involved in a merge. + +link:tutorial-2.html[Part two of this tutorial] explains the object +database, the index file, and a few other odds and ends that you'll +need to make the most of git. + +If you don't want to continue with that right away, a few other +digressions that may be interesting at this point are: + + * linkgit:git-format-patch[1], linkgit:git-am[1]: These convert + series of git commits into emailed patches, and vice versa, + useful for projects such as the linux kernel which rely heavily + on emailed patches. + + * linkgit:git-bisect[1]: When there is a regression in your + project, one way to track down the bug is by searching through + the history to find the exact commit that's to blame. Git bisect + can help you perform a binary search for that commit. It is + smart enough to perform a close-to-optimal search even in the + case of complex non-linear history with lots of merged branches. + + * link:everyday.html[Everyday GIT with 20 Commands Or So] + + * link:cvs-migration.html[git for CVS users]. diff --git a/Documentation/urls-remotes.txt b/Documentation/urls-remotes.txt new file mode 100644 index 0000000..5dd1f83 --- /dev/null +++ b/Documentation/urls-remotes.txt @@ -0,0 +1,55 @@ +include::urls.txt[] + +REMOTES +------- + +In addition to the above, as a short-hand, the name of a +file in `$GIT_DIR/remotes` directory can be given; the +named file should be in the following format: + +------------ + URL: one of the above URL format + Push: <refspec> + Pull: <refspec> + +------------ + +Then such a short-hand is specified in place of +<repository> without <refspec> parameters on the command +line, <refspec> specified on `Push:` lines or `Pull:` +lines are used for `git-push` and `git-fetch`/`git-pull`, +respectively. Multiple `Push:` and `Pull:` lines may +be specified for additional branch mappings. + +Or, equivalently, in the `$GIT_DIR/config` (note the use +of `fetch` instead of `Pull:`): + +------------ + [remote "<remote>"] + url = <url> + push = <refspec> + fetch = <refspec> + +------------ + +The name of a file in `$GIT_DIR/branches` directory can be +specified as an older notation short-hand; the named +file should contain a single line, a URL in one of the +above formats, optionally followed by a hash `#` and the +name of remote head (URL fragment notation). +`$GIT_DIR/branches/<remote>` file that stores a <url> +without the fragment is equivalent to have this in the +corresponding file in the `$GIT_DIR/remotes/` directory. + +------------ + URL: <url> + Pull: refs/heads/master:<remote> + +------------ + +while having `<url>#<head>` is equivalent to + +------------ + URL: <url> + Pull: refs/heads/<head>:<remote> +------------ diff --git a/Documentation/urls.txt b/Documentation/urls.txt new file mode 100644 index 0000000..81ac17f --- /dev/null +++ b/Documentation/urls.txt @@ -0,0 +1,46 @@ +GIT URLS[[URLS]] +---------------- + +One of the following notations can be used +to name the remote repository: + +=============================================================== +- rsync://host.xz/path/to/repo.git/ +- http://host.xz/path/to/repo.git/ +- https://host.xz/path/to/repo.git/ +- git://host.xz/path/to/repo.git/ +- git://host.xz/~user/path/to/repo.git/ +- ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/ +- ssh://{startsb}user@{endsb}host.xz/path/to/repo.git/ +- ssh://{startsb}user@{endsb}host.xz/~user/path/to/repo.git/ +- ssh://{startsb}user@{endsb}host.xz/~/path/to/repo.git +=============================================================== + +SSH is the default transport protocol over the network. You can +optionally specify which user to log-in as, and an alternate, +scp-like syntax is also supported. Both syntaxes support +username expansion, as does the native git protocol, but +only the former supports port specification. The following +three are identical to the last three above, respectively: + +=============================================================== +- {startsb}user@{endsb}host.xz:/path/to/repo.git/ +- {startsb}user@{endsb}host.xz:~user/path/to/repo.git/ +- {startsb}user@{endsb}host.xz:path/to/repo.git +=============================================================== + +To sync with a local directory, you can use: + +=============================================================== +- /path/to/repo.git/ +- file:///path/to/repo.git/ +=============================================================== + +ifndef::git-clone[] +They are mostly equivalent, except when cloning. See +linkgit:git-clone[1] for details. +endif::git-clone[] + +ifdef::git-clone[] +They are equivalent, except the former implies --local option. +endif::git-clone[] diff --git a/Documentation/user-manual.conf b/Documentation/user-manual.conf new file mode 100644 index 0000000..339b309 --- /dev/null +++ b/Documentation/user-manual.conf @@ -0,0 +1,21 @@ +[titles] + underlines="__","==","--","~~","^^" + +[attributes] +caret=^ +startsb=[ +endsb=] +tilde=~ + +[linkgit-inlinemacro] +<ulink url="{target}.html">{target}{0?({0})}</ulink> + +ifdef::backend-docbook[] +# "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. +[listingblock] +<example><title>{title}</title> +<literallayout> +| +</literallayout> +{title#}</example> +endif::backend-docbook[] diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt new file mode 100644 index 0000000..40b0de0 --- /dev/null +++ b/Documentation/user-manual.txt @@ -0,0 +1,4562 @@ +Git User's Manual (for version 1.5.3 or newer) +______________________________________________ + + +Git is a fast distributed revision control system. + +This manual is designed to be readable by someone with basic UNIX +command-line skills, but no previous knowledge of git. + +<<repositories-and-branches>> and <<exploring-git-history>> explain how +to fetch and study a project using git--read these chapters to learn how +to build and test a particular version of a software project, search for +regressions, and so on. + +People needing to do actual development will also want to read +<<Developing-with-git>> and <<sharing-development>>. + +Further chapters cover more specialized topics. + +Comprehensive reference documentation is available through the man +pages. For a command such as "git clone", just use + +------------------------------------------------ +$ man git-clone +------------------------------------------------ + +See also <<git-quick-start>> for a brief overview of git commands, +without any explanation. + +Finally, see <<todo>> for ways that you can help make this manual more +complete. + + +[[repositories-and-branches]] +Repositories and Branches +========================= + +[[how-to-get-a-git-repository]] +How to get a git repository +--------------------------- + +It will be useful to have a git repository to experiment with as you +read this manual. + +The best way to get one is by using the linkgit:git-clone[1] command to +download a copy of an existing repository. If you don't already have a +project in mind, here are some interesting examples: + +------------------------------------------------ + # git itself (approx. 10MB download): +$ git clone git://git.kernel.org/pub/scm/git/git.git + # the linux kernel (approx. 150MB download): +$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git +------------------------------------------------ + +The initial clone may be time-consuming for a large project, but you +will only need to clone once. + +The clone command creates a new directory named after the project ("git" +or "linux-2.6" in the examples above). After you cd into this +directory, you will see that it contains a copy of the project files, +called the <<def_working_tree,working tree>>, together with a special +top-level directory named ".git", which contains all the information +about the history of the project. + +[[how-to-check-out]] +How to check out a different version of a project +------------------------------------------------- + +Git is best thought of as a tool for storing the history of a collection +of files. It stores the history as a compressed collection of +interrelated snapshots of the project's contents. In git each such +version is called a <<def_commit,commit>>. + +Those snapshots aren't necessarily all arranged in a single line from +oldest to newest; instead, work may simultaneously proceed along +parallel lines of development, called <<def_branch,branches>>, which may +merge and diverge. + +A single git repository can track development on multiple branches. It +does this by keeping a list of <<def_head,heads>> which reference the +latest commit on each branch; the linkgit:git-branch[1] command shows +you the list of branch heads: + +------------------------------------------------ +$ git branch +* master +------------------------------------------------ + +A freshly cloned repository contains a single branch head, by default +named "master", with the working directory initialized to the state of +the project referred to by that branch head. + +Most projects also use <<def_tag,tags>>. Tags, like heads, are +references into the project's history, and can be listed using the +linkgit:git-tag[1] command: + +------------------------------------------------ +$ git tag -l +v2.6.11 +v2.6.11-tree +v2.6.12 +v2.6.12-rc2 +v2.6.12-rc3 +v2.6.12-rc4 +v2.6.12-rc5 +v2.6.12-rc6 +v2.6.13 +... +------------------------------------------------ + +Tags are expected to always point at the same version of a project, +while heads are expected to advance as development progresses. + +Create a new branch head pointing to one of these versions and check it +out using linkgit:git-checkout[1]: + +------------------------------------------------ +$ git checkout -b new v2.6.13 +------------------------------------------------ + +The working directory then reflects the contents that the project had +when it was tagged v2.6.13, and linkgit:git-branch[1] shows two +branches, with an asterisk marking the currently checked-out branch: + +------------------------------------------------ +$ git branch + master +* new +------------------------------------------------ + +If you decide that you'd rather see version 2.6.17, you can modify +the current branch to point at v2.6.17 instead, with + +------------------------------------------------ +$ git reset --hard v2.6.17 +------------------------------------------------ + +Note that if the current branch head was your only reference to a +particular point in history, then resetting that branch may leave you +with no way to find the history it used to point to; so use this command +carefully. + +[[understanding-commits]] +Understanding History: Commits +------------------------------ + +Every change in the history of a project is represented by a commit. +The linkgit:git-show[1] command shows the most recent commit on the +current branch: + +------------------------------------------------ +$ git show +commit 17cf781661e6d38f737f15f53ab552f1e95960d7 +Author: Linus Torvalds <torvalds@ppc970.osdl.org.(none)> +Date: Tue Apr 19 14:11:06 2005 -0700 + + Remove duplicate getenv(DB_ENVIRONMENT) call + + Noted by Tony Luck. + +diff --git a/init-db.c b/init-db.c +index 65898fa..b002dc6 100644 +--- a/init-db.c ++++ b/init-db.c +@@ -7,7 +7,7 @@ + + int main(int argc, char **argv) + { +- char *sha1_dir = getenv(DB_ENVIRONMENT), *path; ++ char *sha1_dir, *path; + int len, i; + + if (mkdir(".git", 0755) < 0) { +------------------------------------------------ + +As you can see, a commit shows who made the latest change, what they +did, and why. + +Every commit has a 40-hexdigit id, sometimes called the "object name" or the +"SHA1 id", shown on the first line of the "git show" output. You can usually +refer to a commit by a shorter name, such as a tag or a branch name, but this +longer name can also be useful. Most importantly, it is a globally unique +name for this commit: so if you tell somebody else the object name (for +example in email), then you are guaranteed that name will refer to the same +commit in their repository that it does in yours (assuming their repository +has that commit at all). Since the object name is computed as a hash over the +contents of the commit, you are guaranteed that the commit can never change +without its name also changing. + +In fact, in <<git-concepts>> we shall see that everything stored in git +history, including file data and directory contents, is stored in an object +with a name that is a hash of its contents. + +[[understanding-reachability]] +Understanding history: commits, parents, and reachability +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Every commit (except the very first commit in a project) also has a +parent commit which shows what happened before this commit. +Following the chain of parents will eventually take you back to the +beginning of the project. + +However, the commits do not form a simple list; git allows lines of +development to diverge and then reconverge, and the point where two +lines of development reconverge is called a "merge". The commit +representing a merge can therefore have more than one parent, with +each parent representing the most recent commit on one of the lines +of development leading to that point. + +The best way to see how this works is using the linkgit:gitk[1] +command; running gitk now on a git repository and looking for merge +commits will help understand how the git organizes history. + +In the following, we say that commit X is "reachable" from commit Y +if commit X is an ancestor of commit Y. Equivalently, you could say +that Y is a descendant of X, or that there is a chain of parents +leading from commit Y to commit X. + +[[history-diagrams]] +Understanding history: History diagrams +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We will sometimes represent git history using diagrams like the one +below. Commits are shown as "o", and the links between them with +lines drawn with - / and \. Time goes left to right: + + +................................................ + o--o--o <-- Branch A + / + o--o--o <-- master + \ + o--o--o <-- Branch B +................................................ + +If we need to talk about a particular commit, the character "o" may +be replaced with another letter or number. + +[[what-is-a-branch]] +Understanding history: What is a branch? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When we need to be precise, we will use the word "branch" to mean a line +of development, and "branch head" (or just "head") to mean a reference +to the most recent commit on a branch. In the example above, the branch +head named "A" is a pointer to one particular commit, but we refer to +the line of three commits leading up to that point as all being part of +"branch A". + +However, when no confusion will result, we often just use the term +"branch" both for branches and for branch heads. + +[[manipulating-branches]] +Manipulating branches +--------------------- + +Creating, deleting, and modifying branches is quick and easy; here's +a summary of the commands: + +git branch:: + list all branches +git branch <branch>:: + create a new branch named <branch>, referencing the same + point in history as the current branch +git branch <branch> <start-point>:: + create a new branch named <branch>, referencing + <start-point>, which may be specified any way you like, + including using a branch name or a tag name +git branch -d <branch>:: + delete the branch <branch>; if the branch you are deleting + points to a commit which is not reachable from the current + branch, this command will fail with a warning. +git branch -D <branch>:: + even if the branch points to a commit not reachable + from the current branch, you may know that that commit + is still reachable from some other branch or tag. In that + case it is safe to use this command to force git to delete + the branch. +git checkout <branch>:: + make the current branch <branch>, updating the working + directory to reflect the version referenced by <branch> +git checkout -b <new> <start-point>:: + create a new branch <new> referencing <start-point>, and + check it out. + +The special symbol "HEAD" can always be used to refer to the current +branch. In fact, git uses a file named "HEAD" in the .git directory to +remember which branch is current: + +------------------------------------------------ +$ cat .git/HEAD +ref: refs/heads/master +------------------------------------------------ + +[[detached-head]] +Examining an old version without creating a new branch +------------------------------------------------------ + +The git-checkout command normally expects a branch head, but will also +accept an arbitrary commit; for example, you can check out the commit +referenced by a tag: + +------------------------------------------------ +$ git checkout v2.6.17 +Note: moving to "v2.6.17" which isn't a local branch +If you want to create a new branch from this checkout, you may do so +(now or later) by using -b with the checkout command again. Example: + git checkout -b <new_branch_name> +HEAD is now at 427abfa... Linux v2.6.17 +------------------------------------------------ + +The HEAD then refers to the SHA1 of the commit instead of to a branch, +and git branch shows that you are no longer on a branch: + +------------------------------------------------ +$ cat .git/HEAD +427abfa28afedffadfca9dd8b067eb6d36bac53f +$ git branch +* (no branch) + master +------------------------------------------------ + +In this case we say that the HEAD is "detached". + +This is an easy way to check out a particular version without having to +make up a name for the new branch. You can still create a new branch +(or tag) for this version later if you decide to. + +[[examining-remote-branches]] +Examining branches from a remote repository +------------------------------------------- + +The "master" branch that was created at the time you cloned is a copy +of the HEAD in the repository that you cloned from. That repository +may also have had other branches, though, and your local repository +keeps branches which track each of those remote branches, which you +can view using the "-r" option to linkgit:git-branch[1]: + +------------------------------------------------ +$ git branch -r + origin/HEAD + origin/html + origin/maint + origin/man + origin/master + origin/next + origin/pu + origin/todo +------------------------------------------------ + +You cannot check out these remote-tracking branches, but you can +examine them on a branch of your own, just as you would a tag: + +------------------------------------------------ +$ git checkout -b my-todo-copy origin/todo +------------------------------------------------ + +Note that the name "origin" is just the name that git uses by default +to refer to the repository that you cloned from. + +[[how-git-stores-references]] +Naming branches, tags, and other references +------------------------------------------- + +Branches, remote-tracking branches, and tags are all references to +commits. All references are named with a slash-separated path name +starting with "refs"; the names we've been using so far are actually +shorthand: + + - The branch "test" is short for "refs/heads/test". + - The tag "v2.6.18" is short for "refs/tags/v2.6.18". + - "origin/master" is short for "refs/remotes/origin/master". + +The full name is occasionally useful if, for example, there ever +exists a tag and a branch with the same name. + +(Newly created refs are actually stored in the .git/refs directory, +under the path given by their name. However, for efficiency reasons +they may also be packed together in a single file; see +linkgit:git-pack-refs[1]). + +As another useful shortcut, the "HEAD" of a repository can be referred +to just using the name of that repository. So, for example, "origin" +is usually a shortcut for the HEAD branch in the repository "origin". + +For the complete list of paths which git checks for references, and +the order it uses to decide which to choose when there are multiple +references with the same shorthand name, see the "SPECIFYING +REVISIONS" section of linkgit:git-rev-parse[1]. + +[[Updating-a-repository-with-git-fetch]] +Updating a repository with git fetch +------------------------------------ + +Eventually the developer cloned from will do additional work in her +repository, creating new commits and advancing the branches to point +at the new commits. + +The command "git fetch", with no arguments, will update all of the +remote-tracking branches to the latest version found in her +repository. It will not touch any of your own branches--not even the +"master" branch that was created for you on clone. + +[[fetching-branches]] +Fetching branches from other repositories +----------------------------------------- + +You can also track branches from repositories other than the one you +cloned from, using linkgit:git-remote[1]: + +------------------------------------------------- +$ git remote add linux-nfs git://linux-nfs.org/pub/nfs-2.6.git +$ git fetch linux-nfs +* refs/remotes/linux-nfs/master: storing branch 'master' ... + commit: bf81b46 +------------------------------------------------- + +New remote-tracking branches will be stored under the shorthand name +that you gave "git remote add", in this case linux-nfs: + +------------------------------------------------- +$ git branch -r +linux-nfs/master +origin/master +------------------------------------------------- + +If you run "git fetch <remote>" later, the tracking branches for the +named <remote> will be updated. + +If you examine the file .git/config, you will see that git has added +a new stanza: + +------------------------------------------------- +$ cat .git/config +... +[remote "linux-nfs"] + url = git://linux-nfs.org/pub/nfs-2.6.git + fetch = +refs/heads/*:refs/remotes/linux-nfs/* +... +------------------------------------------------- + +This is what causes git to track the remote's branches; you may modify +or delete these configuration options by editing .git/config with a +text editor. (See the "CONFIGURATION FILE" section of +linkgit:git-config[1] for details.) + +[[exploring-git-history]] +Exploring git history +===================== + +Git is best thought of as a tool for storing the history of a +collection of files. It does this by storing compressed snapshots of +the contents of a file hierarchy, together with "commits" which show +the relationships between these snapshots. + +Git provides extremely flexible and fast tools for exploring the +history of a project. + +We start with one specialized tool that is useful for finding the +commit that introduced a bug into a project. + +[[using-bisect]] +How to use bisect to find a regression +-------------------------------------- + +Suppose version 2.6.18 of your project worked, but the version at +"master" crashes. Sometimes the best way to find the cause of such a +regression is to perform a brute-force search through the project's +history to find the particular commit that caused the problem. The +linkgit:git-bisect[1] command can help you do this: + +------------------------------------------------- +$ git bisect start +$ git bisect good v2.6.18 +$ git bisect bad master +Bisecting: 3537 revisions left to test after this +[65934a9a028b88e83e2b0f8b36618fe503349f8e] BLOCK: Make USB storage depend on SCSI rather than selecting it [try #6] +------------------------------------------------- + +If you run "git branch" at this point, you'll see that git has +temporarily moved you to a new branch named "bisect". This branch +points to a commit (with commit id 65934...) that is reachable from +"master" but not from v2.6.18. Compile and test it, and see whether +it crashes. Assume it does crash. Then: + +------------------------------------------------- +$ git bisect bad +Bisecting: 1769 revisions left to test after this +[7eff82c8b1511017ae605f0c99ac275a7e21b867] i2c-core: Drop useless bitmaskings +------------------------------------------------- + +checks out an older version. Continue like this, telling git at each +stage whether the version it gives you is good or bad, and notice +that the number of revisions left to test is cut approximately in +half each time. + +After about 13 tests (in this case), it will output the commit id of +the guilty commit. You can then examine the commit with +linkgit:git-show[1], find out who wrote it, and mail them your bug +report with the commit id. Finally, run + +------------------------------------------------- +$ git bisect reset +------------------------------------------------- + +to return you to the branch you were on before and delete the +temporary "bisect" branch. + +Note that the version which git-bisect checks out for you at each +point is just a suggestion, and you're free to try a different +version if you think it would be a good idea. For example, +occasionally you may land on a commit that broke something unrelated; +run + +------------------------------------------------- +$ git bisect visualize +------------------------------------------------- + +which will run gitk and label the commit it chose with a marker that +says "bisect". Chose a safe-looking commit nearby, note its commit +id, and check it out with: + +------------------------------------------------- +$ git reset --hard fb47ddb2db... +------------------------------------------------- + +then test, run "bisect good" or "bisect bad" as appropriate, and +continue. + +[[naming-commits]] +Naming commits +-------------- + +We have seen several ways of naming commits already: + + - 40-hexdigit object name + - branch name: refers to the commit at the head of the given + branch + - tag name: refers to the commit pointed to by the given tag + (we've seen branches and tags are special cases of + <<how-git-stores-references,references>>). + - HEAD: refers to the head of the current branch + +There are many more; see the "SPECIFYING REVISIONS" section of the +linkgit:git-rev-parse[1] man page for the complete list of ways to +name revisions. Some examples: + +------------------------------------------------- +$ git show fb47ddb2 # the first few characters of the object name + # are usually enough to specify it uniquely +$ git show HEAD^ # the parent of the HEAD commit +$ git show HEAD^^ # the grandparent +$ git show HEAD~4 # the great-great-grandparent +------------------------------------------------- + +Recall that merge commits may have more than one parent; by default, +^ and ~ follow the first parent listed in the commit, but you can +also choose: + +------------------------------------------------- +$ git show HEAD^1 # show the first parent of HEAD +$ git show HEAD^2 # show the second parent of HEAD +------------------------------------------------- + +In addition to HEAD, there are several other special names for +commits: + +Merges (to be discussed later), as well as operations such as +git-reset, which change the currently checked-out commit, generally +set ORIG_HEAD to the value HEAD had before the current operation. + +The git-fetch operation always stores the head of the last fetched +branch in FETCH_HEAD. For example, if you run git fetch without +specifying a local branch as the target of the operation + +------------------------------------------------- +$ git fetch git://example.com/proj.git theirbranch +------------------------------------------------- + +the fetched commits will still be available from FETCH_HEAD. + +When we discuss merges we'll also see the special name MERGE_HEAD, +which refers to the other branch that we're merging in to the current +branch. + +The linkgit:git-rev-parse[1] command is a low-level command that is +occasionally useful for translating some name for a commit to the object +name for that commit: + +------------------------------------------------- +$ git rev-parse origin +e05db0fd4f31dde7005f075a84f96b360d05984b +------------------------------------------------- + +[[creating-tags]] +Creating tags +------------- + +We can also create a tag to refer to a particular commit; after +running + +------------------------------------------------- +$ git tag stable-1 1b2e1d63ff +------------------------------------------------- + +You can use stable-1 to refer to the commit 1b2e1d63ff. + +This creates a "lightweight" tag. If you would also like to include a +comment with the tag, and possibly sign it cryptographically, then you +should create a tag object instead; see the linkgit:git-tag[1] man page +for details. + +[[browsing-revisions]] +Browsing revisions +------------------ + +The linkgit:git-log[1] command can show lists of commits. On its +own, it shows all commits reachable from the parent commit; but you +can also make more specific requests: + +------------------------------------------------- +$ git log v2.5.. # commits since (not reachable from) v2.5 +$ git log test..master # commits reachable from master but not test +$ git log master..test # ...reachable from test but not master +$ git log master...test # ...reachable from either test or master, + # but not both +$ git log --since="2 weeks ago" # commits from the last 2 weeks +$ git log Makefile # commits which modify Makefile +$ git log fs/ # ... which modify any file under fs/ +$ git log -S'foo()' # commits which add or remove any file data + # matching the string 'foo()' +------------------------------------------------- + +And of course you can combine all of these; the following finds +commits since v2.5 which touch the Makefile or any file under fs: + +------------------------------------------------- +$ git log v2.5.. Makefile fs/ +------------------------------------------------- + +You can also ask git log to show patches: + +------------------------------------------------- +$ git log -p +------------------------------------------------- + +See the "--pretty" option in the linkgit:git-log[1] man page for more +display options. + +Note that git log starts with the most recent commit and works +backwards through the parents; however, since git history can contain +multiple independent lines of development, the particular order that +commits are listed in may be somewhat arbitrary. + +[[generating-diffs]] +Generating diffs +---------------- + +You can generate diffs between any two versions using +linkgit:git-diff[1]: + +------------------------------------------------- +$ git diff master..test +------------------------------------------------- + +That will produce the diff between the tips of the two branches. If +you'd prefer to find the diff from their common ancestor to test, you +can use three dots instead of two: + +------------------------------------------------- +$ git diff master...test +------------------------------------------------- + +Sometimes what you want instead is a set of patches; for this you can +use linkgit:git-format-patch[1]: + +------------------------------------------------- +$ git format-patch master..test +------------------------------------------------- + +will generate a file with a patch for each commit reachable from test +but not from master. + +[[viewing-old-file-versions]] +Viewing old file versions +------------------------- + +You can always view an old version of a file by just checking out the +correct revision first. But sometimes it is more convenient to be +able to view an old version of a single file without checking +anything out; this command does that: + +------------------------------------------------- +$ git show v2.5:fs/locks.c +------------------------------------------------- + +Before the colon may be anything that names a commit, and after it +may be any path to a file tracked by git. + +[[history-examples]] +Examples +-------- + +[[counting-commits-on-a-branch]] +Counting the number of commits on a branch +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Suppose you want to know how many commits you've made on "mybranch" +since it diverged from "origin": + +------------------------------------------------- +$ git log --pretty=oneline origin..mybranch | wc -l +------------------------------------------------- + +Alternatively, you may often see this sort of thing done with the +lower-level command linkgit:git-rev-list[1], which just lists the SHA1's +of all the given commits: + +------------------------------------------------- +$ git rev-list origin..mybranch | wc -l +------------------------------------------------- + +[[checking-for-equal-branches]] +Check whether two branches point at the same history +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Suppose you want to check whether two branches point at the same point +in history. + +------------------------------------------------- +$ git diff origin..master +------------------------------------------------- + +will tell you whether the contents of the project are the same at the +two branches; in theory, however, it's possible that the same project +contents could have been arrived at by two different historical +routes. You could compare the object names: + +------------------------------------------------- +$ git rev-list origin +e05db0fd4f31dde7005f075a84f96b360d05984b +$ git rev-list master +e05db0fd4f31dde7005f075a84f96b360d05984b +------------------------------------------------- + +Or you could recall that the ... operator selects all commits +contained reachable from either one reference or the other but not +both: so + +------------------------------------------------- +$ git log origin...master +------------------------------------------------- + +will return no commits when the two branches are equal. + +[[finding-tagged-descendants]] +Find first tagged version including a given fix +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Suppose you know that the commit e05db0fd fixed a certain problem. +You'd like to find the earliest tagged release that contains that +fix. + +Of course, there may be more than one answer--if the history branched +after commit e05db0fd, then there could be multiple "earliest" tagged +releases. + +You could just visually inspect the commits since e05db0fd: + +------------------------------------------------- +$ gitk e05db0fd.. +------------------------------------------------- + +Or you can use linkgit:git-name-rev[1], which will give the commit a +name based on any tag it finds pointing to one of the commit's +descendants: + +------------------------------------------------- +$ git name-rev --tags e05db0fd +e05db0fd tags/v1.5.0-rc1^0~23 +------------------------------------------------- + +The linkgit:git-describe[1] command does the opposite, naming the +revision using a tag on which the given commit is based: + +------------------------------------------------- +$ git describe e05db0fd +v1.5.0-rc0-260-ge05db0f +------------------------------------------------- + +but that may sometimes help you guess which tags might come after the +given commit. + +If you just want to verify whether a given tagged version contains a +given commit, you could use linkgit:git-merge-base[1]: + +------------------------------------------------- +$ git merge-base e05db0fd v1.5.0-rc1 +e05db0fd4f31dde7005f075a84f96b360d05984b +------------------------------------------------- + +The merge-base command finds a common ancestor of the given commits, +and always returns one or the other in the case where one is a +descendant of the other; so the above output shows that e05db0fd +actually is an ancestor of v1.5.0-rc1. + +Alternatively, note that + +------------------------------------------------- +$ git log v1.5.0-rc1..e05db0fd +------------------------------------------------- + +will produce empty output if and only if v1.5.0-rc1 includes e05db0fd, +because it outputs only commits that are not reachable from v1.5.0-rc1. + +As yet another alternative, the linkgit:git-show-branch[1] command lists +the commits reachable from its arguments with a display on the left-hand +side that indicates which arguments that commit is reachable from. So, +you can run something like + +------------------------------------------------- +$ git show-branch e05db0fd v1.5.0-rc0 v1.5.0-rc1 v1.5.0-rc2 +! [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if +available + ! [v1.5.0-rc0] GIT v1.5.0 preview + ! [v1.5.0-rc1] GIT v1.5.0-rc1 + ! [v1.5.0-rc2] GIT v1.5.0-rc2 +... +------------------------------------------------- + +then search for a line that looks like + +------------------------------------------------- ++ ++ [e05db0fd] Fix warnings in sha1_file.c - use C99 printf format if +available +------------------------------------------------- + +Which shows that e05db0fd is reachable from itself, from v1.5.0-rc1, and +from v1.5.0-rc2, but not from v1.5.0-rc0. + +[[showing-commits-unique-to-a-branch]] +Showing commits unique to a given branch +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Suppose you would like to see all the commits reachable from the branch +head named "master" but not from any other head in your repository. + +We can list all the heads in this repository with +linkgit:git-show-ref[1]: + +------------------------------------------------- +$ git show-ref --heads +bf62196b5e363d73353a9dcf094c59595f3153b7 refs/heads/core-tutorial +db768d5504c1bb46f63ee9d6e1772bd047e05bf9 refs/heads/maint +a07157ac624b2524a059a3414e99f6f44bebc1e7 refs/heads/master +24dbc180ea14dc1aebe09f14c8ecf32010690627 refs/heads/tutorial-2 +1e87486ae06626c2f31eaa63d26fc0fd646c8af2 refs/heads/tutorial-fixes +------------------------------------------------- + +We can get just the branch-head names, and remove "master", with +the help of the standard utilities cut and grep: + +------------------------------------------------- +$ git show-ref --heads | cut -d' ' -f2 | grep -v '^refs/heads/master' +refs/heads/core-tutorial +refs/heads/maint +refs/heads/tutorial-2 +refs/heads/tutorial-fixes +------------------------------------------------- + +And then we can ask to see all the commits reachable from master +but not from these other heads: + +------------------------------------------------- +$ gitk master --not $( git show-ref --heads | cut -d' ' -f2 | + grep -v '^refs/heads/master' ) +------------------------------------------------- + +Obviously, endless variations are possible; for example, to see all +commits reachable from some head but not from any tag in the repository: + +------------------------------------------------- +$ gitk $( git show-ref --heads ) --not $( git show-ref --tags ) +------------------------------------------------- + +(See linkgit:git-rev-parse[1] for explanations of commit-selecting +syntax such as `--not`.) + +[[making-a-release]] +Creating a changelog and tarball for a software release +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The linkgit:git-archive[1] command can create a tar or zip archive from +any version of a project; for example: + +------------------------------------------------- +$ git archive --format=tar --prefix=project/ HEAD | gzip >latest.tar.gz +------------------------------------------------- + +will use HEAD to produce a tar archive in which each filename is +preceded by "project/". + +If you're releasing a new version of a software project, you may want +to simultaneously make a changelog to include in the release +announcement. + +Linus Torvalds, for example, makes new kernel releases by tagging them, +then running: + +------------------------------------------------- +$ release-script 2.6.12 2.6.13-rc6 2.6.13-rc7 +------------------------------------------------- + +where release-script is a shell script that looks like: + +------------------------------------------------- +#!/bin/sh +stable="$1" +last="$2" +new="$3" +echo "# git tag v$new" +echo "git archive --prefix=linux-$new/ v$new | gzip -9 > ../linux-$new.tar.gz" +echo "git diff v$stable v$new | gzip -9 > ../patch-$new.gz" +echo "git log --no-merges v$new ^v$last > ../ChangeLog-$new" +echo "git shortlog --no-merges v$new ^v$last > ../ShortLog" +echo "git diff --stat --summary -M v$last v$new > ../diffstat-$new" +------------------------------------------------- + +and then he just cut-and-pastes the output commands after verifying that +they look OK. + +[[Finding-comments-with-given-content]] +Finding commits referencing a file with given content +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Somebody hands you a copy of a file, and asks which commits modified a +file such that it contained the given content either before or after the +commit. You can find out with this: + +------------------------------------------------- +$ git log --raw --abbrev=40 --pretty=oneline | + grep -B 1 `git hash-object filename` +------------------------------------------------- + +Figuring out why this works is left as an exercise to the (advanced) +student. The linkgit:git-log[1], linkgit:git-diff-tree[1], and +linkgit:git-hash-object[1] man pages may prove helpful. + +[[Developing-with-git]] +Developing with git +=================== + +[[telling-git-your-name]] +Telling git your name +--------------------- + +Before creating any commits, you should introduce yourself to git. The +easiest way to do so is to make sure the following lines appear in a +file named .gitconfig in your home directory: + +------------------------------------------------ +[user] + name = Your Name Comes Here + email = you@yourdomain.example.com +------------------------------------------------ + +(See the "CONFIGURATION FILE" section of linkgit:git-config[1] for +details on the configuration file.) + + +[[creating-a-new-repository]] +Creating a new repository +------------------------- + +Creating a new repository from scratch is very easy: + +------------------------------------------------- +$ mkdir project +$ cd project +$ git init +------------------------------------------------- + +If you have some initial content (say, a tarball): + +------------------------------------------------- +$ tar -xzvf project.tar.gz +$ cd project +$ git init +$ git add . # include everything below ./ in the first commit: +$ git commit +------------------------------------------------- + +[[how-to-make-a-commit]] +How to make a commit +-------------------- + +Creating a new commit takes three steps: + + 1. Making some changes to the working directory using your + favorite editor. + 2. Telling git about your changes. + 3. Creating the commit using the content you told git about + in step 2. + +In practice, you can interleave and repeat steps 1 and 2 as many +times as you want: in order to keep track of what you want committed +at step 3, git maintains a snapshot of the tree's contents in a +special staging area called "the index." + +At the beginning, the content of the index will be identical to +that of the HEAD. The command "git diff --cached", which shows +the difference between the HEAD and the index, should therefore +produce no output at that point. + +Modifying the index is easy: + +To update the index with the new contents of a modified file, use + +------------------------------------------------- +$ git add path/to/file +------------------------------------------------- + +To add the contents of a new file to the index, use + +------------------------------------------------- +$ git add path/to/file +------------------------------------------------- + +To remove a file from the index and from the working tree, + +------------------------------------------------- +$ git rm path/to/file +------------------------------------------------- + +After each step you can verify that + +------------------------------------------------- +$ git diff --cached +------------------------------------------------- + +always shows the difference between the HEAD and the index file--this +is what you'd commit if you created the commit now--and that + +------------------------------------------------- +$ git diff +------------------------------------------------- + +shows the difference between the working tree and the index file. + +Note that "git add" always adds just the current contents of a file +to the index; further changes to the same file will be ignored unless +you run git-add on the file again. + +When you're ready, just run + +------------------------------------------------- +$ git commit +------------------------------------------------- + +and git will prompt you for a commit message and then create the new +commit. Check to make sure it looks like what you expected with + +------------------------------------------------- +$ git show +------------------------------------------------- + +As a special shortcut, + +------------------------------------------------- +$ git commit -a +------------------------------------------------- + +will update the index with any files that you've modified or removed +and create a commit, all in one step. + +A number of commands are useful for keeping track of what you're +about to commit: + +------------------------------------------------- +$ git diff --cached # difference between HEAD and the index; what + # would be committed if you ran "commit" now. +$ git diff # difference between the index file and your + # working directory; changes that would not + # be included if you ran "commit" now. +$ git diff HEAD # difference between HEAD and working tree; what + # would be committed if you ran "commit -a" now. +$ git status # a brief per-file summary of the above. +------------------------------------------------- + +You can also use linkgit:git-gui[1] to create commits, view changes in +the index and the working tree files, and individually select diff hunks +for inclusion in the index (by right-clicking on the diff hunk and +choosing "Stage Hunk For Commit"). + +[[creating-good-commit-messages]] +Creating good commit messages +----------------------------- + +Though not required, it's a good idea to begin the commit message +with a single short (less than 50 character) line summarizing the +change, followed by a blank line and then a more thorough +description. Tools that turn commits into email, for example, use +the first line on the Subject line and the rest of the commit in the +body. + +[[ignoring-files]] +Ignoring files +-------------- + +A project will often generate files that you do 'not' want to track with git. +This typically includes files generated by a build process or temporary +backup files made by your editor. Of course, 'not' tracking files with git +is just a matter of 'not' calling "`git add`" on them. But it quickly becomes +annoying to have these untracked files lying around; e.g. they make +"`git add .`" and "`git commit -a`" practically useless, and they keep +showing up in the output of "`git status`". + +You can tell git to ignore certain files by creating a file called .gitignore +in the top level of your working directory, with contents such as: + +------------------------------------------------- +# Lines starting with '#' are considered comments. +# Ignore any file named foo.txt. +foo.txt +# Ignore (generated) html files, +*.html +# except foo.html which is maintained by hand. +!foo.html +# Ignore objects and archives. +*.[oa] +------------------------------------------------- + +See linkgit:gitignore[5] for a detailed explanation of the syntax. You can +also place .gitignore files in other directories in your working tree, and they +will apply to those directories and their subdirectories. The `.gitignore` +files can be added to your repository like any other files (just run `git add +.gitignore` and `git commit`, as usual), which is convenient when the exclude +patterns (such as patterns matching build output files) would also make sense +for other users who clone your repository. + +If you wish the exclude patterns to affect only certain repositories +(instead of every repository for a given project), you may instead put +them in a file in your repository named .git/info/exclude, or in any file +specified by the `core.excludesfile` configuration variable. Some git +commands can also take exclude patterns directly on the command line. +See linkgit:gitignore[5] for the details. + +[[how-to-merge]] +How to merge +------------ + +You can rejoin two diverging branches of development using +linkgit:git-merge[1]: + +------------------------------------------------- +$ git merge branchname +------------------------------------------------- + +merges the development in the branch "branchname" into the current +branch. If there are conflicts--for example, if the same file is +modified in two different ways in the remote branch and the local +branch--then you are warned; the output may look something like this: + +------------------------------------------------- +$ git merge next + 100% (4/4) done +Auto-merged file.txt +CONFLICT (content): Merge conflict in file.txt +Automatic merge failed; fix conflicts and then commit the result. +------------------------------------------------- + +Conflict markers are left in the problematic files, and after +you resolve the conflicts manually, you can update the index +with the contents and run git commit, as you normally would when +creating a new file. + +If you examine the resulting commit using gitk, you will see that it +has two parents, one pointing to the top of the current branch, and +one to the top of the other branch. + +[[resolving-a-merge]] +Resolving a merge +----------------- + +When a merge isn't resolved automatically, git leaves the index and +the working tree in a special state that gives you all the +information you need to help resolve the merge. + +Files with conflicts are marked specially in the index, so until you +resolve the problem and update the index, linkgit:git-commit[1] will +fail: + +------------------------------------------------- +$ git commit +file.txt: needs merge +------------------------------------------------- + +Also, linkgit:git-status[1] will list those files as "unmerged", and the +files with conflicts will have conflict markers added, like this: + +------------------------------------------------- +<<<<<<< HEAD:file.txt +Hello world +======= +Goodbye +>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086:file.txt +------------------------------------------------- + +All you need to do is edit the files to resolve the conflicts, and then + +------------------------------------------------- +$ git add file.txt +$ git commit +------------------------------------------------- + +Note that the commit message will already be filled in for you with +some information about the merge. Normally you can just use this +default message unchanged, but you may add additional commentary of +your own if desired. + +The above is all you need to know to resolve a simple merge. But git +also provides more information to help resolve conflicts: + +[[conflict-resolution]] +Getting conflict-resolution help during a merge +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +All of the changes that git was able to merge automatically are +already added to the index file, so linkgit:git-diff[1] shows only +the conflicts. It uses an unusual syntax: + +------------------------------------------------- +$ git diff +diff --cc file.txt +index 802992c,2b60207..0000000 +--- a/file.txt ++++ b/file.txt +@@@ -1,1 -1,1 +1,5 @@@ +++<<<<<<< HEAD:file.txt + +Hello world +++======= ++ Goodbye +++>>>>>>> 77976da35a11db4580b80ae27e8d65caf5208086:file.txt +------------------------------------------------- + +Recall that the commit which will be committed after we resolve this +conflict will have two parents instead of the usual one: one parent +will be HEAD, the tip of the current branch; the other will be the +tip of the other branch, which is stored temporarily in MERGE_HEAD. + +During the merge, the index holds three versions of each file. Each of +these three "file stages" represents a different version of the file: + +------------------------------------------------- +$ git show :1:file.txt # the file in a common ancestor of both branches +$ git show :2:file.txt # the version from HEAD, but including any + # nonconflicting changes from MERGE_HEAD +$ git show :3:file.txt # the version from MERGE_HEAD, but including any + # nonconflicting changes from HEAD. +------------------------------------------------- + +Since the stage 2 and stage 3 versions have already been updated with +nonconflicting changes, the only remaining differences between them are +the important ones; thus linkgit:git-diff[1] can use the information in +the index to show only those conflicts. + +The diff above shows the differences between the working-tree version of +file.txt and the stage 2 and stage 3 versions. So instead of preceding +each line by a single "+" or "-", it now uses two columns: the first +column is used for differences between the first parent and the working +directory copy, and the second for differences between the second parent +and the working directory copy. (See the "COMBINED DIFF FORMAT" section +of linkgit:git-diff-files[1] for a details of the format.) + +After resolving the conflict in the obvious way (but before updating the +index), the diff will look like: + +------------------------------------------------- +$ git diff +diff --cc file.txt +index 802992c,2b60207..0000000 +--- a/file.txt ++++ b/file.txt +@@@ -1,1 -1,1 +1,1 @@@ +- Hello world + -Goodbye +++Goodbye world +------------------------------------------------- + +This shows that our resolved version deleted "Hello world" from the +first parent, deleted "Goodbye" from the second parent, and added +"Goodbye world", which was previously absent from both. + +Some special diff options allow diffing the working directory against +any of these stages: + +------------------------------------------------- +$ git diff -1 file.txt # diff against stage 1 +$ git diff --base file.txt # same as the above +$ git diff -2 file.txt # diff against stage 2 +$ git diff --ours file.txt # same as the above +$ git diff -3 file.txt # diff against stage 3 +$ git diff --theirs file.txt # same as the above. +------------------------------------------------- + +The linkgit:git-log[1] and gitk[1] commands also provide special help +for merges: + +------------------------------------------------- +$ git log --merge +$ gitk --merge +------------------------------------------------- + +These will display all commits which exist only on HEAD or on +MERGE_HEAD, and which touch an unmerged file. + +You may also use linkgit:git-mergetool[1], which lets you merge the +unmerged files using external tools such as emacs or kdiff3. + +Each time you resolve the conflicts in a file and update the index: + +------------------------------------------------- +$ git add file.txt +------------------------------------------------- + +the different stages of that file will be "collapsed", after which +git-diff will (by default) no longer show diffs for that file. + +[[undoing-a-merge]] +Undoing a merge +--------------- + +If you get stuck and decide to just give up and throw the whole mess +away, you can always return to the pre-merge state with + +------------------------------------------------- +$ git reset --hard HEAD +------------------------------------------------- + +Or, if you've already committed the merge that you want to throw away, + +------------------------------------------------- +$ git reset --hard ORIG_HEAD +------------------------------------------------- + +However, this last command can be dangerous in some cases--never +throw away a commit you have already committed if that commit may +itself have been merged into another branch, as doing so may confuse +further merges. + +[[fast-forwards]] +Fast-forward merges +------------------- + +There is one special case not mentioned above, which is treated +differently. Normally, a merge results in a merge commit, with two +parents, one pointing at each of the two lines of development that +were merged. + +However, if the current branch is a descendant of the other--so every +commit present in the one is already contained in the other--then git +just performs a "fast forward"; the head of the current branch is moved +forward to point at the head of the merged-in branch, without any new +commits being created. + +[[fixing-mistakes]] +Fixing mistakes +--------------- + +If you've messed up the working tree, but haven't yet committed your +mistake, you can return the entire working tree to the last committed +state with + +------------------------------------------------- +$ git reset --hard HEAD +------------------------------------------------- + +If you make a commit that you later wish you hadn't, there are two +fundamentally different ways to fix the problem: + + 1. You can create a new commit that undoes whatever was done + by the old commit. This is the correct thing if your + mistake has already been made public. + + 2. You can go back and modify the old commit. You should + never do this if you have already made the history public; + git does not normally expect the "history" of a project to + change, and cannot correctly perform repeated merges from + a branch that has had its history changed. + +[[reverting-a-commit]] +Fixing a mistake with a new commit +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Creating a new commit that reverts an earlier change is very easy; +just pass the linkgit:git-revert[1] command a reference to the bad +commit; for example, to revert the most recent commit: + +------------------------------------------------- +$ git revert HEAD +------------------------------------------------- + +This will create a new commit which undoes the change in HEAD. You +will be given a chance to edit the commit message for the new commit. + +You can also revert an earlier change, for example, the next-to-last: + +------------------------------------------------- +$ git revert HEAD^ +------------------------------------------------- + +In this case git will attempt to undo the old change while leaving +intact any changes made since then. If more recent changes overlap +with the changes to be reverted, then you will be asked to fix +conflicts manually, just as in the case of <<resolving-a-merge, +resolving a merge>>. + +[[fixing-a-mistake-by-rewriting-history]] +Fixing a mistake by rewriting history +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If the problematic commit is the most recent commit, and you have not +yet made that commit public, then you may just +<<undoing-a-merge,destroy it using git-reset>>. + +Alternatively, you +can edit the working directory and update the index to fix your +mistake, just as if you were going to <<how-to-make-a-commit,create a +new commit>>, then run + +------------------------------------------------- +$ git commit --amend +------------------------------------------------- + +which will replace the old commit by a new commit incorporating your +changes, giving you a chance to edit the old commit message first. + +Again, you should never do this to a commit that may already have +been merged into another branch; use linkgit:git-revert[1] instead in +that case. + +It is also possible to replace commits further back in the history, but +this is an advanced topic to be left for +<<cleaning-up-history,another chapter>>. + +[[checkout-of-path]] +Checking out an old version of a file +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In the process of undoing a previous bad change, you may find it +useful to check out an older version of a particular file using +linkgit:git-checkout[1]. We've used git checkout before to switch +branches, but it has quite different behavior if it is given a path +name: the command + +------------------------------------------------- +$ git checkout HEAD^ path/to/file +------------------------------------------------- + +replaces path/to/file by the contents it had in the commit HEAD^, and +also updates the index to match. It does not change branches. + +If you just want to look at an old version of the file, without +modifying the working directory, you can do that with +linkgit:git-show[1]: + +------------------------------------------------- +$ git show HEAD^:path/to/file +------------------------------------------------- + +which will display the given version of the file. + +[[interrupted-work]] +Temporarily setting aside work in progress +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +While you are in the middle of working on something complicated, you +find an unrelated but obvious and trivial bug. You would like to fix it +before continuing. You can use linkgit:git-stash[1] to save the current +state of your work, and after fixing the bug (or, optionally after doing +so on a different branch and then coming back), unstash the +work-in-progress changes. + +------------------------------------------------ +$ git stash "work in progress for foo feature" +------------------------------------------------ + +This command will save your changes away to the `stash`, and +reset your working tree and the index to match the tip of your +current branch. Then you can make your fix as usual. + +------------------------------------------------ +... edit and test ... +$ git commit -a -m "blorpl: typofix" +------------------------------------------------ + +After that, you can go back to what you were working on with +`git stash apply`: + +------------------------------------------------ +$ git stash apply +------------------------------------------------ + + +[[ensuring-good-performance]] +Ensuring good performance +------------------------- + +On large repositories, git depends on compression to keep the history +information from taking up too much space on disk or in memory. + +This compression is not performed automatically. Therefore you +should occasionally run linkgit:git-gc[1]: + +------------------------------------------------- +$ git gc +------------------------------------------------- + +to recompress the archive. This can be very time-consuming, so +you may prefer to run git-gc when you are not doing other work. + + +[[ensuring-reliability]] +Ensuring reliability +-------------------- + +[[checking-for-corruption]] +Checking the repository for corruption +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The linkgit:git-fsck[1] command runs a number of self-consistency checks +on the repository, and reports on any problems. This may take some +time. The most common warning by far is about "dangling" objects: + +------------------------------------------------- +$ git fsck +dangling commit 7281251ddd2a61e38657c827739c57015671a6b3 +dangling commit 2706a059f258c6b245f298dc4ff2ccd30ec21a63 +dangling commit 13472b7c4b80851a1bc551779171dcb03655e9b5 +dangling blob 218761f9d90712d37a9c5e36f406f92202db07eb +dangling commit bf093535a34a4d35731aa2bd90fe6b176302f14f +dangling commit 8e4bec7f2ddaa268bef999853c25755452100f8e +dangling tree d50bb86186bf27b681d25af89d3b5b68382e4085 +dangling tree b24c2473f1fd3d91352a624795be026d64c8841f +... +------------------------------------------------- + +Dangling objects are not a problem. At worst they may take up a little +extra disk space. They can sometimes provide a last-resort method for +recovering lost work--see <<dangling-objects>> for details. However, if +you wish, you can remove them with linkgit:git-prune[1] or the `--prune` +option to linkgit:git-gc[1]: + +------------------------------------------------- +$ git gc --prune +------------------------------------------------- + +This may be time-consuming. Unlike most other git operations (including +git-gc when run without any options), it is not safe to prune while +other git operations are in progress in the same repository. + +If linkgit:git-fsck[1] complains about sha1 mismatches or missing +objects, you may have a much more serious problem; your best option is +probably restoring from backups. See +<<recovering-from-repository-corruption>> for a detailed discussion. + +[[recovering-lost-changes]] +Recovering lost changes +~~~~~~~~~~~~~~~~~~~~~~~ + +[[reflogs]] +Reflogs +^^^^^^^ + +Say you modify a branch with `linkgit:git-reset[1] --hard`, and then +realize that the branch was the only reference you had to that point in +history. + +Fortunately, git also keeps a log, called a "reflog", of all the +previous values of each branch. So in this case you can still find the +old history using, for example, + +------------------------------------------------- +$ git log master@{1} +------------------------------------------------- + +This lists the commits reachable from the previous version of the +"master" branch head. This syntax can be used with any git command +that accepts a commit, not just with git log. Some other examples: + +------------------------------------------------- +$ git show master@{2} # See where the branch pointed 2, +$ git show master@{3} # 3, ... changes ago. +$ gitk master@{yesterday} # See where it pointed yesterday, +$ gitk master@{"1 week ago"} # ... or last week +$ git log --walk-reflogs master # show reflog entries for master +------------------------------------------------- + +A separate reflog is kept for the HEAD, so + +------------------------------------------------- +$ git show HEAD@{"1 week ago"} +------------------------------------------------- + +will show what HEAD pointed to one week ago, not what the current branch +pointed to one week ago. This allows you to see the history of what +you've checked out. + +The reflogs are kept by default for 30 days, after which they may be +pruned. See linkgit:git-reflog[1] and linkgit:git-gc[1] to learn +how to control this pruning, and see the "SPECIFYING REVISIONS" +section of linkgit:git-rev-parse[1] for details. + +Note that the reflog history is very different from normal git history. +While normal history is shared by every repository that works on the +same project, the reflog history is not shared: it tells you only about +how the branches in your local repository have changed over time. + +[[dangling-object-recovery]] +Examining dangling objects +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In some situations the reflog may not be able to save you. For example, +suppose you delete a branch, then realize you need the history it +contained. The reflog is also deleted; however, if you have not yet +pruned the repository, then you may still be able to find the lost +commits in the dangling objects that git-fsck reports. See +<<dangling-objects>> for the details. + +------------------------------------------------- +$ git fsck +dangling commit 7281251ddd2a61e38657c827739c57015671a6b3 +dangling commit 2706a059f258c6b245f298dc4ff2ccd30ec21a63 +dangling commit 13472b7c4b80851a1bc551779171dcb03655e9b5 +... +------------------------------------------------- + +You can examine +one of those dangling commits with, for example, + +------------------------------------------------ +$ gitk 7281251ddd --not --all +------------------------------------------------ + +which does what it sounds like: it says that you want to see the commit +history that is described by the dangling commit(s), but not the +history that is described by all your existing branches and tags. Thus +you get exactly the history reachable from that commit that is lost. +(And notice that it might not be just one commit: we only report the +"tip of the line" as being dangling, but there might be a whole deep +and complex commit history that was dropped.) + +If you decide you want the history back, you can always create a new +reference pointing to it, for example, a new branch: + +------------------------------------------------ +$ git branch recovered-branch 7281251ddd +------------------------------------------------ + +Other types of dangling objects (blobs and trees) are also possible, and +dangling objects can arise in other situations. + + +[[sharing-development]] +Sharing development with others +=============================== + +[[getting-updates-with-git-pull]] +Getting updates with git pull +----------------------------- + +After you clone a repository and make a few changes of your own, you +may wish to check the original repository for updates and merge them +into your own work. + +We have already seen <<Updating-a-repository-with-git-fetch,how to +keep remote tracking branches up to date>> with linkgit:git-fetch[1], +and how to merge two branches. So you can merge in changes from the +original repository's master branch with: + +------------------------------------------------- +$ git fetch +$ git merge origin/master +------------------------------------------------- + +However, the linkgit:git-pull[1] command provides a way to do this in +one step: + +------------------------------------------------- +$ git pull origin master +------------------------------------------------- + +In fact, if you have "master" checked out, then by default "git pull" +merges from the HEAD branch of the origin repository. So often you can +accomplish the above with just a simple + +------------------------------------------------- +$ git pull +------------------------------------------------- + +More generally, a branch that is created from a remote branch will pull +by default from that branch. See the descriptions of the +branch.<name>.remote and branch.<name>.merge options in +linkgit:git-config[1], and the discussion of the `--track` option in +linkgit:git-checkout[1], to learn how to control these defaults. + +In addition to saving you keystrokes, "git pull" also helps you by +producing a default commit message documenting the branch and +repository that you pulled from. + +(But note that no such commit will be created in the case of a +<<fast-forwards,fast forward>>; instead, your branch will just be +updated to point to the latest commit from the upstream branch.) + +The git-pull command can also be given "." as the "remote" repository, +in which case it just merges in a branch from the current repository; so +the commands + +------------------------------------------------- +$ git pull . branch +$ git merge branch +------------------------------------------------- + +are roughly equivalent. The former is actually very commonly used. + +[[submitting-patches]] +Submitting patches to a project +------------------------------- + +If you just have a few changes, the simplest way to submit them may +just be to send them as patches in email: + +First, use linkgit:git-format-patch[1]; for example: + +------------------------------------------------- +$ git format-patch origin +------------------------------------------------- + +will produce a numbered series of files in the current directory, one +for each patch in the current branch but not in origin/HEAD. + +You can then import these into your mail client and send them by +hand. However, if you have a lot to send at once, you may prefer to +use the linkgit:git-send-email[1] script to automate the process. +Consult the mailing list for your project first to determine how they +prefer such patches be handled. + +[[importing-patches]] +Importing patches to a project +------------------------------ + +Git also provides a tool called linkgit:git-am[1] (am stands for +"apply mailbox"), for importing such an emailed series of patches. +Just save all of the patch-containing messages, in order, into a +single mailbox file, say "patches.mbox", then run + +------------------------------------------------- +$ git am -3 patches.mbox +------------------------------------------------- + +Git will apply each patch in order; if any conflicts are found, it +will stop, and you can fix the conflicts as described in +"<<resolving-a-merge,Resolving a merge>>". (The "-3" option tells +git to perform a merge; if you would prefer it just to abort and +leave your tree and index untouched, you may omit that option.) + +Once the index is updated with the results of the conflict +resolution, instead of creating a new commit, just run + +------------------------------------------------- +$ git am --resolved +------------------------------------------------- + +and git will create the commit for you and continue applying the +remaining patches from the mailbox. + +The final result will be a series of commits, one for each patch in +the original mailbox, with authorship and commit log message each +taken from the message containing each patch. + +[[public-repositories]] +Public git repositories +----------------------- + +Another way to submit changes to a project is to tell the maintainer +of that project to pull the changes from your repository using +linkgit:git-pull[1]. In the section "<<getting-updates-with-git-pull, +Getting updates with git pull>>" we described this as a way to get +updates from the "main" repository, but it works just as well in the +other direction. + +If you and the maintainer both have accounts on the same machine, then +you can just pull changes from each other's repositories directly; +commands that accept repository URLs as arguments will also accept a +local directory name: + +------------------------------------------------- +$ git clone /path/to/repository +$ git pull /path/to/other/repository +------------------------------------------------- + +or an ssh URL: + +------------------------------------------------- +$ git clone ssh://yourhost/~you/repository +------------------------------------------------- + +For projects with few developers, or for synchronizing a few private +repositories, this may be all you need. + +However, the more common way to do this is to maintain a separate public +repository (usually on a different host) for others to pull changes +from. This is usually more convenient, and allows you to cleanly +separate private work in progress from publicly visible work. + +You will continue to do your day-to-day work in your personal +repository, but periodically "push" changes from your personal +repository into your public repository, allowing other developers to +pull from that repository. So the flow of changes, in a situation +where there is one other developer with a public repository, looks +like this: + + you push + your personal repo ------------------> your public repo + ^ | + | | + | you pull | they pull + | | + | | + | they push V + their public repo <------------------- their repo + +We explain how to do this in the following sections. + +[[setting-up-a-public-repository]] +Setting up a public repository +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Assume your personal repository is in the directory ~/proj. We +first create a new clone of the repository and tell git-daemon that it +is meant to be public: + +------------------------------------------------- +$ git clone --bare ~/proj proj.git +$ touch proj.git/git-daemon-export-ok +------------------------------------------------- + +The resulting directory proj.git contains a "bare" git repository--it is +just the contents of the ".git" directory, without any files checked out +around it. + +Next, copy proj.git to the server where you plan to host the +public repository. You can use scp, rsync, or whatever is most +convenient. + +[[exporting-via-git]] +Exporting a git repository via the git protocol +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This is the preferred method. + +If someone else administers the server, they should tell you what +directory to put the repository in, and what git:// URL it will appear +at. You can then skip to the section +"<<pushing-changes-to-a-public-repository,Pushing changes to a public +repository>>", below. + +Otherwise, all you need to do is start linkgit:git-daemon[1]; it will +listen on port 9418. By default, it will allow access to any directory +that looks like a git directory and contains the magic file +git-daemon-export-ok. Passing some directory paths as git-daemon +arguments will further restrict the exports to those paths. + +You can also run git-daemon as an inetd service; see the +linkgit:git-daemon[1] man page for details. (See especially the +examples section.) + +[[exporting-via-http]] +Exporting a git repository via http +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The git protocol gives better performance and reliability, but on a +host with a web server set up, http exports may be simpler to set up. + +All you need to do is place the newly created bare git repository in +a directory that is exported by the web server, and make some +adjustments to give web clients some extra information they need: + +------------------------------------------------- +$ mv proj.git /home/you/public_html/proj.git +$ cd proj.git +$ git --bare update-server-info +$ chmod a+x hooks/post-update +------------------------------------------------- + +(For an explanation of the last two lines, see +linkgit:git-update-server-info[1], and the documentation +link:hooks.html[Hooks used by git].) + +Advertise the URL of proj.git. Anybody else should then be able to +clone or pull from that URL, for example with a command line like: + +------------------------------------------------- +$ git clone http://yourserver.com/~you/proj.git +------------------------------------------------- + +(See also +link:howto/setup-git-server-over-http.txt[setup-git-server-over-http] +for a slightly more sophisticated setup using WebDAV which also +allows pushing over http.) + +[[pushing-changes-to-a-public-repository]] +Pushing changes to a public repository +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Note that the two techniques outlined above (exporting via +<<exporting-via-http,http>> or <<exporting-via-git,git>>) allow other +maintainers to fetch your latest changes, but they do not allow write +access, which you will need to update the public repository with the +latest changes created in your private repository. + +The simplest way to do this is using linkgit:git-push[1] and ssh; to +update the remote branch named "master" with the latest state of your +branch named "master", run + +------------------------------------------------- +$ git push ssh://yourserver.com/~you/proj.git master:master +------------------------------------------------- + +or just + +------------------------------------------------- +$ git push ssh://yourserver.com/~you/proj.git master +------------------------------------------------- + +As with git-fetch, git-push will complain if this does not result in a +<<fast-forwards,fast forward>>; see the following section for details on +handling this case. + +Note that the target of a "push" is normally a +<<def_bare_repository,bare>> repository. You can also push to a +repository that has a checked-out working tree, but the working tree +will not be updated by the push. This may lead to unexpected results if +the branch you push to is the currently checked-out branch! + +As with git-fetch, you may also set up configuration options to +save typing; so, for example, after + +------------------------------------------------- +$ cat >>.git/config <<EOF +[remote "public-repo"] + url = ssh://yourserver.com/~you/proj.git +EOF +------------------------------------------------- + +you should be able to perform the above push with just + +------------------------------------------------- +$ git push public-repo master +------------------------------------------------- + +See the explanations of the remote.<name>.url, branch.<name>.remote, +and remote.<name>.push options in linkgit:git-config[1] for +details. + +[[forcing-push]] +What to do when a push fails +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If a push would not result in a <<fast-forwards,fast forward>> of the +remote branch, then it will fail with an error like: + +------------------------------------------------- +error: remote 'refs/heads/master' is not an ancestor of + local 'refs/heads/master'. + Maybe you are not up-to-date and need to pull first? +error: failed to push to 'ssh://yourserver.com/~you/proj.git' +------------------------------------------------- + +This can happen, for example, if you: + + - use `git reset --hard` to remove already-published commits, or + - use `git commit --amend` to replace already-published commits + (as in <<fixing-a-mistake-by-rewriting-history>>), or + - use `git rebase` to rebase any already-published commits (as + in <<using-git-rebase>>). + +You may force git-push to perform the update anyway by preceding the +branch name with a plus sign: + +------------------------------------------------- +$ git push ssh://yourserver.com/~you/proj.git +master +------------------------------------------------- + +Normally whenever a branch head in a public repository is modified, it +is modified to point to a descendant of the commit that it pointed to +before. By forcing a push in this situation, you break that convention. +(See <<problems-with-rewriting-history>>.) + +Nevertheless, this is a common practice for people that need a simple +way to publish a work-in-progress patch series, and it is an acceptable +compromise as long as you warn other developers that this is how you +intend to manage the branch. + +It's also possible for a push to fail in this way when other people have +the right to push to the same repository. In that case, the correct +solution is to retry the push after first updating your work by either a +pull or a fetch followed by a rebase; see the +<<setting-up-a-shared-repository,next section>> and +link:cvs-migration.html[git for CVS users] for more. + +[[setting-up-a-shared-repository]] +Setting up a shared repository +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Another way to collaborate is by using a model similar to that +commonly used in CVS, where several developers with special rights +all push to and pull from a single shared repository. See +link:cvs-migration.html[git for CVS users] for instructions on how to +set this up. + +However, while there is nothing wrong with git's support for shared +repositories, this mode of operation is not generally recommended, +simply because the mode of collaboration that git supports--by +exchanging patches and pulling from public repositories--has so many +advantages over the central shared repository: + + - Git's ability to quickly import and merge patches allows a + single maintainer to process incoming changes even at very + high rates. And when that becomes too much, git-pull provides + an easy way for that maintainer to delegate this job to other + maintainers while still allowing optional review of incoming + changes. + - Since every developer's repository has the same complete copy + of the project history, no repository is special, and it is + trivial for another developer to take over maintenance of a + project, either by mutual agreement, or because a maintainer + becomes unresponsive or difficult to work with. + - The lack of a central group of "committers" means there is + less need for formal decisions about who is "in" and who is + "out". + +[[setting-up-gitweb]] +Allowing web browsing of a repository +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The gitweb cgi script provides users an easy way to browse your +project's files and history without having to install git; see the file +gitweb/INSTALL in the git source tree for instructions on setting it up. + +[[sharing-development-examples]] +Examples +-------- + +[[maintaining-topic-branches]] +Maintaining topic branches for a Linux subsystem maintainer +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This describes how Tony Luck uses git in his role as maintainer of the +IA64 architecture for the Linux kernel. + +He uses two public branches: + + - A "test" tree into which patches are initially placed so that they + can get some exposure when integrated with other ongoing development. + This tree is available to Andrew for pulling into -mm whenever he + wants. + + - A "release" tree into which tested patches are moved for final sanity + checking, and as a vehicle to send them upstream to Linus (by sending + him a "please pull" request.) + +He also uses a set of temporary branches ("topic branches"), each +containing a logical grouping of patches. + +To set this up, first create your work tree by cloning Linus's public +tree: + +------------------------------------------------- +$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work +$ cd work +------------------------------------------------- + +Linus's tree will be stored in the remote branch named origin/master, +and can be updated using linkgit:git-fetch[1]; you can track other +public trees using linkgit:git-remote[1] to set up a "remote" and +linkgit:git-fetch[1] to keep them up-to-date; see +<<repositories-and-branches>>. + +Now create the branches in which you are going to work; these start out +at the current tip of origin/master branch, and should be set up (using +the --track option to linkgit:git-branch[1]) to merge changes in from +Linus by default. + +------------------------------------------------- +$ git branch --track test origin/master +$ git branch --track release origin/master +------------------------------------------------- + +These can be easily kept up to date using linkgit:git-pull[1]. + +------------------------------------------------- +$ git checkout test && git pull +$ git checkout release && git pull +------------------------------------------------- + +Important note! If you have any local changes in these branches, then +this merge will create a commit object in the history (with no local +changes git will simply do a "Fast forward" merge). Many people dislike +the "noise" that this creates in the Linux history, so you should avoid +doing this capriciously in the "release" branch, as these noisy commits +will become part of the permanent history when you ask Linus to pull +from the release branch. + +A few configuration variables (see linkgit:git-config[1]) can +make it easy to push both branches to your public tree. (See +<<setting-up-a-public-repository>>.) + +------------------------------------------------- +$ cat >> .git/config <<EOF +[remote "mytree"] + url = master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git + push = release + push = test +EOF +------------------------------------------------- + +Then you can push both the test and release trees using +linkgit:git-push[1]: + +------------------------------------------------- +$ git push mytree +------------------------------------------------- + +or push just one of the test and release branches using: + +------------------------------------------------- +$ git push mytree test +------------------------------------------------- + +or + +------------------------------------------------- +$ git push mytree release +------------------------------------------------- + +Now to apply some patches from the community. Think of a short +snappy name for a branch to hold this patch (or related group of +patches), and create a new branch from the current tip of Linus's +branch: + +------------------------------------------------- +$ git checkout -b speed-up-spinlocks origin +------------------------------------------------- + +Now you apply the patch(es), run some tests, and commit the change(s). If +the patch is a multi-part series, then you should apply each as a separate +commit to this branch. + +------------------------------------------------- +$ ... patch ... test ... commit [ ... patch ... test ... commit ]* +------------------------------------------------- + +When you are happy with the state of this change, you can pull it into the +"test" branch in preparation to make it public: + +------------------------------------------------- +$ git checkout test && git pull . speed-up-spinlocks +------------------------------------------------- + +It is unlikely that you would have any conflicts here ... but you might if you +spent a while on this step and had also pulled new versions from upstream. + +Some time later when enough time has passed and testing done, you can pull the +same branch into the "release" tree ready to go upstream. This is where you +see the value of keeping each patch (or patch series) in its own branch. It +means that the patches can be moved into the "release" tree in any order. + +------------------------------------------------- +$ git checkout release && git pull . speed-up-spinlocks +------------------------------------------------- + +After a while, you will have a number of branches, and despite the +well chosen names you picked for each of them, you may forget what +they are for, or what status they are in. To get a reminder of what +changes are in a specific branch, use: + +------------------------------------------------- +$ git log linux..branchname | git-shortlog +------------------------------------------------- + +To see whether it has already been merged into the test or release branches, +use: + +------------------------------------------------- +$ git log test..branchname +------------------------------------------------- + +or + +------------------------------------------------- +$ git log release..branchname +------------------------------------------------- + +(If this branch has not yet been merged, you will see some log entries. +If it has been merged, then there will be no output.) + +Once a patch completes the great cycle (moving from test to release, +then pulled by Linus, and finally coming back into your local +"origin/master" branch), the branch for this change is no longer needed. +You detect this when the output from: + +------------------------------------------------- +$ git log origin..branchname +------------------------------------------------- + +is empty. At this point the branch can be deleted: + +------------------------------------------------- +$ git branch -d branchname +------------------------------------------------- + +Some changes are so trivial that it is not necessary to create a separate +branch and then merge into each of the test and release branches. For +these changes, just apply directly to the "release" branch, and then +merge that into the "test" branch. + +To create diffstat and shortlog summaries of changes to include in a "please +pull" request to Linus you can use: + +------------------------------------------------- +$ git diff --stat origin..release +------------------------------------------------- + +and + +------------------------------------------------- +$ git log -p origin..release | git shortlog +------------------------------------------------- + +Here are some of the scripts that simplify all this even further. + +------------------------------------------------- +==== update script ==== +# Update a branch in my GIT tree. If the branch to be updated +# is origin, then pull from kernel.org. Otherwise merge +# origin/master branch into test|release branch + +case "$1" in +test|release) + git checkout $1 && git pull . origin + ;; +origin) + before=$(git rev-parse refs/remotes/origin/master) + git fetch origin + after=$(git rev-parse refs/remotes/origin/master) + if [ $before != $after ] + then + git log $before..$after | git shortlog + fi + ;; +*) + echo "Usage: $0 origin|test|release" 1>&2 + exit 1 + ;; +esac +------------------------------------------------- + +------------------------------------------------- +==== merge script ==== +# Merge a branch into either the test or release branch + +pname=$0 + +usage() +{ + echo "Usage: $pname branch test|release" 1>&2 + exit 1 +} + +git show-ref -q --verify -- refs/heads/"$1" || { + echo "Can't see branch <$1>" 1>&2 + usage +} + +case "$2" in +test|release) + if [ $(git log $2..$1 | wc -c) -eq 0 ] + then + echo $1 already merged into $2 1>&2 + exit 1 + fi + git checkout $2 && git pull . $1 + ;; +*) + usage + ;; +esac +------------------------------------------------- + +------------------------------------------------- +==== status script ==== +# report on status of my ia64 GIT tree + +gb=$(tput setab 2) +rb=$(tput setab 1) +restore=$(tput setab 9) + +if [ `git rev-list test..release | wc -c` -gt 0 ] +then + echo $rb Warning: commits in release that are not in test $restore + git log test..release +fi + +for branch in `git show-ref --heads | sed 's|^.*/||'` +do + if [ $branch = test -o $branch = release ] + then + continue + fi + + echo -n $gb ======= $branch ====== $restore " " + status= + for ref in test release origin/master + do + if [ `git rev-list $ref..$branch | wc -c` -gt 0 ] + then + status=$status${ref:0:1} + fi + done + case $status in + trl) + echo $rb Need to pull into test $restore + ;; + rl) + echo "In test" + ;; + l) + echo "Waiting for linus" + ;; + "") + echo $rb All done $restore + ;; + *) + echo $rb "<$status>" $restore + ;; + esac + git log origin/master..$branch | git shortlog +done +------------------------------------------------- + + +[[cleaning-up-history]] +Rewriting history and maintaining patch series +============================================== + +Normally commits are only added to a project, never taken away or +replaced. Git is designed with this assumption, and violating it will +cause git's merge machinery (for example) to do the wrong thing. + +However, there is a situation in which it can be useful to violate this +assumption. + +[[patch-series]] +Creating the perfect patch series +--------------------------------- + +Suppose you are a contributor to a large project, and you want to add a +complicated feature, and to present it to the other developers in a way +that makes it easy for them to read your changes, verify that they are +correct, and understand why you made each change. + +If you present all of your changes as a single patch (or commit), they +may find that it is too much to digest all at once. + +If you present them with the entire history of your work, complete with +mistakes, corrections, and dead ends, they may be overwhelmed. + +So the ideal is usually to produce a series of patches such that: + + 1. Each patch can be applied in order. + + 2. Each patch includes a single logical change, together with a + message explaining the change. + + 3. No patch introduces a regression: after applying any initial + part of the series, the resulting project still compiles and + works, and has no bugs that it didn't have before. + + 4. The complete series produces the same end result as your own + (probably much messier!) development process did. + +We will introduce some tools that can help you do this, explain how to +use them, and then explain some of the problems that can arise because +you are rewriting history. + +[[using-git-rebase]] +Keeping a patch series up to date using git-rebase +-------------------------------------------------- + +Suppose that you create a branch "mywork" on a remote-tracking branch +"origin", and create some commits on top of it: + +------------------------------------------------- +$ git checkout -b mywork origin +$ vi file.txt +$ git commit +$ vi otherfile.txt +$ git commit +... +------------------------------------------------- + +You have performed no merges into mywork, so it is just a simple linear +sequence of patches on top of "origin": + +................................................ + o--o--o <-- origin + \ + o--o--o <-- mywork +................................................ + +Some more interesting work has been done in the upstream project, and +"origin" has advanced: + +................................................ + o--o--O--o--o--o <-- origin + \ + a--b--c <-- mywork +................................................ + +At this point, you could use "pull" to merge your changes back in; +the result would create a new merge commit, like this: + +................................................ + o--o--O--o--o--o <-- origin + \ \ + a--b--c--m <-- mywork +................................................ + +However, if you prefer to keep the history in mywork a simple series of +commits without any merges, you may instead choose to use +linkgit:git-rebase[1]: + +------------------------------------------------- +$ git checkout mywork +$ git rebase origin +------------------------------------------------- + +This will remove each of your commits from mywork, temporarily saving +them as patches (in a directory named ".dotest"), update mywork to +point at the latest version of origin, then apply each of the saved +patches to the new mywork. The result will look like: + + +................................................ + o--o--O--o--o--o <-- origin + \ + a'--b'--c' <-- mywork +................................................ + +In the process, it may discover conflicts. In that case it will stop +and allow you to fix the conflicts; after fixing conflicts, use "git +add" to update the index with those contents, and then, instead of +running git-commit, just run + +------------------------------------------------- +$ git rebase --continue +------------------------------------------------- + +and git will continue applying the rest of the patches. + +At any point you may use the `--abort` option to abort this process and +return mywork to the state it had before you started the rebase: + +------------------------------------------------- +$ git rebase --abort +------------------------------------------------- + +[[rewriting-one-commit]] +Rewriting a single commit +------------------------- + +We saw in <<fixing-a-mistake-by-rewriting-history>> that you can replace the +most recent commit using + +------------------------------------------------- +$ git commit --amend +------------------------------------------------- + +which will replace the old commit by a new commit incorporating your +changes, giving you a chance to edit the old commit message first. + +You can also use a combination of this and linkgit:git-rebase[1] to +replace a commit further back in your history and recreate the +intervening changes on top of it. First, tag the problematic commit +with + +------------------------------------------------- +$ git tag bad mywork~5 +------------------------------------------------- + +(Either gitk or git-log may be useful for finding the commit.) + +Then check out that commit, edit it, and rebase the rest of the series +on top of it (note that we could check out the commit on a temporary +branch, but instead we're using a <<detached-head,detached head>>): + +------------------------------------------------- +$ git checkout bad +$ # make changes here and update the index +$ git commit --amend +$ git rebase --onto HEAD bad mywork +------------------------------------------------- + +When you're done, you'll be left with mywork checked out, with the top +patches on mywork reapplied on top of your modified commit. You can +then clean up with + +------------------------------------------------- +$ git tag -d bad +------------------------------------------------- + +Note that the immutable nature of git history means that you haven't really +"modified" existing commits; instead, you have replaced the old commits with +new commits having new object names. + +[[reordering-patch-series]] +Reordering or selecting from a patch series +------------------------------------------- + +Given one existing commit, the linkgit:git-cherry-pick[1] command +allows you to apply the change introduced by that commit and create a +new commit that records it. So, for example, if "mywork" points to a +series of patches on top of "origin", you might do something like: + +------------------------------------------------- +$ git checkout -b mywork-new origin +$ gitk origin..mywork & +------------------------------------------------- + +and browse through the list of patches in the mywork branch using gitk, +applying them (possibly in a different order) to mywork-new using +cherry-pick, and possibly modifying them as you go using `commit --amend`. +The linkgit:git-gui[1] command may also help as it allows you to +individually select diff hunks for inclusion in the index (by +right-clicking on the diff hunk and choosing "Stage Hunk for Commit"). + +Another technique is to use git-format-patch to create a series of +patches, then reset the state to before the patches: + +------------------------------------------------- +$ git format-patch origin +$ git reset --hard origin +------------------------------------------------- + +Then modify, reorder, or eliminate patches as preferred before applying +them again with linkgit:git-am[1]. + +[[patch-series-tools]] +Other tools +----------- + +There are numerous other tools, such as StGIT, which exist for the +purpose of maintaining a patch series. These are outside of the scope of +this manual. + +[[problems-with-rewriting-history]] +Problems with rewriting history +------------------------------- + +The primary problem with rewriting the history of a branch has to do +with merging. Suppose somebody fetches your branch and merges it into +their branch, with a result something like this: + +................................................ + o--o--O--o--o--o <-- origin + \ \ + t--t--t--m <-- their branch: +................................................ + +Then suppose you modify the last three commits: + +................................................ + o--o--o <-- new head of origin + / + o--o--O--o--o--o <-- old head of origin +................................................ + +If we examined all this history together in one repository, it will +look like: + +................................................ + o--o--o <-- new head of origin + / + o--o--O--o--o--o <-- old head of origin + \ \ + t--t--t--m <-- their branch: +................................................ + +Git has no way of knowing that the new head is an updated version of +the old head; it treats this situation exactly the same as it would if +two developers had independently done the work on the old and new heads +in parallel. At this point, if someone attempts to merge the new head +in to their branch, git will attempt to merge together the two (old and +new) lines of development, instead of trying to replace the old by the +new. The results are likely to be unexpected. + +You may still choose to publish branches whose history is rewritten, +and it may be useful for others to be able to fetch those branches in +order to examine or test them, but they should not attempt to pull such +branches into their own work. + +For true distributed development that supports proper merging, +published branches should never be rewritten. + +[[bisect-merges]] +Why bisecting merge commits can be harder than bisecting linear history +----------------------------------------------------------------------- + +The linkgit:git-bisect[1] command correctly handles history that +includes merge commits. However, when the commit that it finds is a +merge commit, the user may need to work harder than usual to figure out +why that commit introduced a problem. + +Imagine this history: + +................................................ + ---Z---o---X---...---o---A---C---D + \ / + o---o---Y---...---o---B +................................................ + +Suppose that on the upper line of development, the meaning of one +of the functions that exists at Z is changed at commit X. The +commits from Z leading to A change both the function's +implementation and all calling sites that exist at Z, as well +as new calling sites they add, to be consistent. There is no +bug at A. + +Suppose that in the meantime on the lower line of development somebody +adds a new calling site for that function at commit Y. The +commits from Z leading to B all assume the old semantics of that +function and the callers and the callee are consistent with each +other. There is no bug at B, either. + +Suppose further that the two development lines merge cleanly at C, +so no conflict resolution is required. + +Nevertheless, the code at C is broken, because the callers added +on the lower line of development have not been converted to the new +semantics introduced on the upper line of development. So if all +you know is that D is bad, that Z is good, and that +linkgit:git-bisect[1] identifies C as the culprit, how will you +figure out that the problem is due to this change in semantics? + +When the result of a git-bisect is a non-merge commit, you should +normally be able to discover the problem by examining just that commit. +Developers can make this easy by breaking their changes into small +self-contained commits. That won't help in the case above, however, +because the problem isn't obvious from examination of any single +commit; instead, a global view of the development is required. To +make matters worse, the change in semantics in the problematic +function may be just one small part of the changes in the upper +line of development. + +On the other hand, if instead of merging at C you had rebased the +history between Z to B on top of A, you would have gotten this +linear history: + +................................................................ + ---Z---o---X--...---o---A---o---o---Y*--...---o---B*--D* +................................................................ + +Bisecting between Z and D* would hit a single culprit commit Y*, +and understanding why Y* was broken would probably be easier. + +Partly for this reason, many experienced git users, even when +working on an otherwise merge-heavy project, keep the history +linear by rebasing against the latest upstream version before +publishing. + +[[advanced-branch-management]] +Advanced branch management +========================== + +[[fetching-individual-branches]] +Fetching individual branches +---------------------------- + +Instead of using linkgit:git-remote[1], you can also choose just +to update one branch at a time, and to store it locally under an +arbitrary name: + +------------------------------------------------- +$ git fetch origin todo:my-todo-work +------------------------------------------------- + +The first argument, "origin", just tells git to fetch from the +repository you originally cloned from. The second argument tells git +to fetch the branch named "todo" from the remote repository, and to +store it locally under the name refs/heads/my-todo-work. + +You can also fetch branches from other repositories; so + +------------------------------------------------- +$ git fetch git://example.com/proj.git master:example-master +------------------------------------------------- + +will create a new branch named "example-master" and store in it the +branch named "master" from the repository at the given URL. If you +already have a branch named example-master, it will attempt to +<<fast-forwards,fast-forward>> to the commit given by example.com's +master branch. In more detail: + +[[fetch-fast-forwards]] +git fetch and fast-forwards +--------------------------- + +In the previous example, when updating an existing branch, "git +fetch" checks to make sure that the most recent commit on the remote +branch is a descendant of the most recent commit on your copy of the +branch before updating your copy of the branch to point at the new +commit. Git calls this process a <<fast-forwards,fast forward>>. + +A fast forward looks something like this: + +................................................ + o--o--o--o <-- old head of the branch + \ + o--o--o <-- new head of the branch +................................................ + + +In some cases it is possible that the new head will *not* actually be +a descendant of the old head. For example, the developer may have +realized she made a serious mistake, and decided to backtrack, +resulting in a situation like: + +................................................ + o--o--o--o--a--b <-- old head of the branch + \ + o--o--o <-- new head of the branch +................................................ + +In this case, "git fetch" will fail, and print out a warning. + +In that case, you can still force git to update to the new head, as +described in the following section. However, note that in the +situation above this may mean losing the commits labeled "a" and "b", +unless you've already created a reference of your own pointing to +them. + +[[forcing-fetch]] +Forcing git fetch to do non-fast-forward updates +------------------------------------------------ + +If git fetch fails because the new head of a branch is not a +descendant of the old head, you may force the update with: + +------------------------------------------------- +$ git fetch git://example.com/proj.git +master:refs/remotes/example/master +------------------------------------------------- + +Note the addition of the "+" sign. Alternatively, you can use the "-f" +flag to force updates of all the fetched branches, as in: + +------------------------------------------------- +$ git fetch -f origin +------------------------------------------------- + +Be aware that commits that the old version of example/master pointed at +may be lost, as we saw in the previous section. + +[[remote-branch-configuration]] +Configuring remote branches +--------------------------- + +We saw above that "origin" is just a shortcut to refer to the +repository that you originally cloned from. This information is +stored in git configuration variables, which you can see using +linkgit:git-config[1]: + +------------------------------------------------- +$ git config -l +core.repositoryformatversion=0 +core.filemode=true +core.logallrefupdates=true +remote.origin.url=git://git.kernel.org/pub/scm/git/git.git +remote.origin.fetch=+refs/heads/*:refs/remotes/origin/* +branch.master.remote=origin +branch.master.merge=refs/heads/master +------------------------------------------------- + +If there are other repositories that you also use frequently, you can +create similar configuration options to save typing; for example, +after + +------------------------------------------------- +$ git config remote.example.url git://example.com/proj.git +------------------------------------------------- + +then the following two commands will do the same thing: + +------------------------------------------------- +$ git fetch git://example.com/proj.git master:refs/remotes/example/master +$ git fetch example master:refs/remotes/example/master +------------------------------------------------- + +Even better, if you add one more option: + +------------------------------------------------- +$ git config remote.example.fetch master:refs/remotes/example/master +------------------------------------------------- + +then the following commands will all do the same thing: + +------------------------------------------------- +$ git fetch git://example.com/proj.git master:refs/remotes/example/master +$ git fetch example master:refs/remotes/example/master +$ git fetch example +------------------------------------------------- + +You can also add a "+" to force the update each time: + +------------------------------------------------- +$ git config remote.example.fetch +master:ref/remotes/example/master +------------------------------------------------- + +Don't do this unless you're sure you won't mind "git fetch" possibly +throwing away commits on mybranch. + +Also note that all of the above configuration can be performed by +directly editing the file .git/config instead of using +linkgit:git-config[1]. + +See linkgit:git-config[1] for more details on the configuration +options mentioned above. + + +[[git-concepts]] +Git concepts +============ + +Git is built on a small number of simple but powerful ideas. While it +is possible to get things done without understanding them, you will find +git much more intuitive if you do. + +We start with the most important, the <<def_object_database,object +database>> and the <<def_index,index>>. + +[[the-object-database]] +The Object Database +------------------- + + +We already saw in <<understanding-commits>> that all commits are stored +under a 40-digit "object name". In fact, all the information needed to +represent the history of a project is stored in objects with such names. +In each case the name is calculated by taking the SHA1 hash of the +contents of the object. The SHA1 hash is a cryptographic hash function. +What that means to us is that it is impossible to find two different +objects with the same name. This has a number of advantages; among +others: + +- Git can quickly determine whether two objects are identical or not, + just by comparing names. +- Since object names are computed the same way in every repository, the + same content stored in two repositories will always be stored under + the same name. +- Git can detect errors when it reads an object, by checking that the + object's name is still the SHA1 hash of its contents. + +(See <<object-details>> for the details of the object formatting and +SHA1 calculation.) + +There are four different types of objects: "blob", "tree", "commit", and +"tag". + +- A <<def_blob_object,"blob" object>> is used to store file data. +- A <<def_tree_object,"tree" object>> is an object that ties one or more + "blob" objects into a directory structure. In addition, a tree object + can refer to other tree objects, thus creating a directory hierarchy. +- A <<def_commit_object,"commit" object>> ties such directory hierarchies + together into a <<def_DAG,directed acyclic graph>> of revisions--each + commit contains the object name of exactly one tree designating the + directory hierarchy at the time of the commit. In addition, a commit + refers to "parent" commit objects that describe the history of how we + arrived at that directory hierarchy. +- A <<def_tag_object,"tag" object>> symbolically identifies and can be + used to sign other objects. It contains the object name and type of + another object, a symbolic name (of course!) and, optionally, a + signature. + +The object types in some more detail: + +[[commit-object]] +Commit Object +~~~~~~~~~~~~~ + +The "commit" object links a physical state of a tree with a description +of how we got there and why. Use the --pretty=raw option to +linkgit:git-show[1] or linkgit:git-log[1] to examine your favorite +commit: + +------------------------------------------------ +$ git show -s --pretty=raw 2be7fcb476 +commit 2be7fcb4764f2dbcee52635b91fedb1b3dcf7ab4 +tree fb3a8bdd0ceddd019615af4d57a53f43d8cee2bf +parent 257a84d9d02e90447b149af58b271c19405edb6a +author Dave Watson <dwatson@mimvista.com> 1187576872 -0400 +committer Junio C Hamano <gitster@pobox.com> 1187591163 -0700 + + Fix misspelling of 'suppress' in docs + + Signed-off-by: Junio C Hamano <gitster@pobox.com> +------------------------------------------------ + +As you can see, a commit is defined by: + +- a tree: The SHA1 name of a tree object (as defined below), representing + the contents of a directory at a certain point in time. +- parent(s): The SHA1 name of some number of commits which represent the + immediately previous step(s) in the history of the project. The + example above has one parent; merge commits may have more than + one. A commit with no parents is called a "root" commit, and + represents the initial revision of a project. Each project must have + at least one root. A project can also have multiple roots, though + that isn't common (or necessarily a good idea). +- an author: The name of the person responsible for this change, together + with its date. +- a committer: The name of the person who actually created the commit, + with the date it was done. This may be different from the author, for + example, if the author was someone who wrote a patch and emailed it + to the person who used it to create the commit. +- a comment describing this commit. + +Note that a commit does not itself contain any information about what +actually changed; all changes are calculated by comparing the contents +of the tree referred to by this commit with the trees associated with +its parents. In particular, git does not attempt to record file renames +explicitly, though it can identify cases where the existence of the same +file data at changing paths suggests a rename. (See, for example, the +-M option to linkgit:git-diff[1]). + +A commit is usually created by linkgit:git-commit[1], which creates a +commit whose parent is normally the current HEAD, and whose tree is +taken from the content currently stored in the index. + +[[tree-object]] +Tree Object +~~~~~~~~~~~ + +The ever-versatile linkgit:git-show[1] command can also be used to +examine tree objects, but linkgit:git-ls-tree[1] will give you more +details: + +------------------------------------------------ +$ git ls-tree fb3a8bdd0ce +100644 blob 63c918c667fa005ff12ad89437f2fdc80926e21c .gitignore +100644 blob 5529b198e8d14decbe4ad99db3f7fb632de0439d .mailmap +100644 blob 6ff87c4664981e4397625791c8ea3bbb5f2279a3 COPYING +040000 tree 2fb783e477100ce076f6bf57e4a6f026013dc745 Documentation +100755 blob 3c0032cec592a765692234f1cba47dfdcc3a9200 GIT-VERSION-GEN +100644 blob 289b046a443c0647624607d471289b2c7dcd470b INSTALL +100644 blob 4eb463797adc693dc168b926b6932ff53f17d0b1 Makefile +100644 blob 548142c327a6790ff8821d67c2ee1eff7a656b52 README +... +------------------------------------------------ + +As you can see, a tree object contains a list of entries, each with a +mode, object type, SHA1 name, and name, sorted by name. It represents +the contents of a single directory tree. + +The object type may be a blob, representing the contents of a file, or +another tree, representing the contents of a subdirectory. Since trees +and blobs, like all other objects, are named by the SHA1 hash of their +contents, two trees have the same SHA1 name if and only if their +contents (including, recursively, the contents of all subdirectories) +are identical. This allows git to quickly determine the differences +between two related tree objects, since it can ignore any entries with +identical object names. + +(Note: in the presence of submodules, trees may also have commits as +entries. See <<submodules>> for documentation.) + +Note that the files all have mode 644 or 755: git actually only pays +attention to the executable bit. + +[[blob-object]] +Blob Object +~~~~~~~~~~~ + +You can use linkgit:git-show[1] to examine the contents of a blob; take, +for example, the blob in the entry for "COPYING" from the tree above: + +------------------------------------------------ +$ git show 6ff87c4664 + + Note that the only valid version of the GPL as far as this project + is concerned is _this_ particular version of the license (ie v2, not + v2.2 or v3.x or whatever), unless explicitly otherwise stated. +... +------------------------------------------------ + +A "blob" object is nothing but a binary blob of data. It doesn't refer +to anything else or have attributes of any kind. + +Since the blob is entirely defined by its data, if two files in a +directory tree (or in multiple different versions of the repository) +have the same contents, they will share the same blob object. The object +is totally independent of its location in the directory tree, and +renaming a file does not change the object that file is associated with. + +Note that any tree or blob object can be examined using +linkgit:git-show[1] with the <revision>:<path> syntax. This can +sometimes be useful for browsing the contents of a tree that is not +currently checked out. + +[[trust]] +Trust +~~~~~ + +If you receive the SHA1 name of a blob from one source, and its contents +from another (possibly untrusted) source, you can still trust that those +contents are correct as long as the SHA1 name agrees. This is because +the SHA1 is designed so that it is infeasible to find different contents +that produce the same hash. + +Similarly, you need only trust the SHA1 name of a top-level tree object +to trust the contents of the entire directory that it refers to, and if +you receive the SHA1 name of a commit from a trusted source, then you +can easily verify the entire history of commits reachable through +parents of that commit, and all of those contents of the trees referred +to by those commits. + +So to introduce some real trust in the system, the only thing you need +to do is to digitally sign just 'one' special note, which includes the +name of a top-level commit. Your digital signature shows others +that you trust that commit, and the immutability of the history of +commits tells others that they can trust the whole history. + +In other words, you can easily validate a whole archive by just +sending out a single email that tells the people the name (SHA1 hash) +of the top commit, and digitally sign that email using something +like GPG/PGP. + +To assist in this, git also provides the tag object... + +[[tag-object]] +Tag Object +~~~~~~~~~~ + +A tag object contains an object, object type, tag name, the name of the +person ("tagger") who created the tag, and a message, which may contain +a signature, as can be seen using the linkgit:git-cat-file[1]: + +------------------------------------------------ +$ git cat-file tag v1.5.0 +object 437b1b20df4b356c9342dac8d38849f24ef44f27 +type commit +tag v1.5.0 +tagger Junio C Hamano <junkio@cox.net> 1171411200 +0000 + +GIT 1.5.0 +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1.4.6 (GNU/Linux) + +iD8DBQBF0lGqwMbZpPMRm5oRAuRiAJ9ohBLd7s2kqjkKlq1qqC57SbnmzQCdG4ui +nLE/L9aUXdWeTFPron96DLA= +=2E+0 +-----END PGP SIGNATURE----- +------------------------------------------------ + +See the linkgit:git-tag[1] command to learn how to create and verify tag +objects. (Note that linkgit:git-tag[1] can also be used to create +"lightweight tags", which are not tag objects at all, but just simple +references whose names begin with "refs/tags/"). + +[[pack-files]] +How git stores objects efficiently: pack files +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Newly created objects are initially created in a file named after the +object's SHA1 hash (stored in .git/objects). + +Unfortunately this system becomes inefficient once a project has a +lot of objects. Try this on an old project: + +------------------------------------------------ +$ git count-objects +6930 objects, 47620 kilobytes +------------------------------------------------ + +The first number is the number of objects which are kept in +individual files. The second is the amount of space taken up by +those "loose" objects. + +You can save space and make git faster by moving these loose objects in +to a "pack file", which stores a group of objects in an efficient +compressed format; the details of how pack files are formatted can be +found in link:technical/pack-format.txt[technical/pack-format.txt]. + +To put the loose objects into a pack, just run git repack: + +------------------------------------------------ +$ git repack +Generating pack... +Done counting 6020 objects. +Deltifying 6020 objects. + 100% (6020/6020) done +Writing 6020 objects. + 100% (6020/6020) done +Total 6020, written 6020 (delta 4070), reused 0 (delta 0) +Pack pack-3e54ad29d5b2e05838c75df582c65257b8d08e1c created. +------------------------------------------------ + +You can then run + +------------------------------------------------ +$ git prune +------------------------------------------------ + +to remove any of the "loose" objects that are now contained in the +pack. This will also remove any unreferenced objects (which may be +created when, for example, you use "git reset" to remove a commit). +You can verify that the loose objects are gone by looking at the +.git/objects directory or by running + +------------------------------------------------ +$ git count-objects +0 objects, 0 kilobytes +------------------------------------------------ + +Although the object files are gone, any commands that refer to those +objects will work exactly as they did before. + +The linkgit:git-gc[1] command performs packing, pruning, and more for +you, so is normally the only high-level command you need. + +[[dangling-objects]] +Dangling objects +~~~~~~~~~~~~~~~~ + +The linkgit:git-fsck[1] command will sometimes complain about dangling +objects. They are not a problem. + +The most common cause of dangling objects is that you've rebased a +branch, or you have pulled from somebody else who rebased a branch--see +<<cleaning-up-history>>. In that case, the old head of the original +branch still exists, as does everything it pointed to. The branch +pointer itself just doesn't, since you replaced it with another one. + +There are also other situations that cause dangling objects. For +example, a "dangling blob" may arise because you did a "git add" of a +file, but then, before you actually committed it and made it part of the +bigger picture, you changed something else in that file and committed +that *updated* thing--the old state that you added originally ends up +not being pointed to by any commit or tree, so it's now a dangling blob +object. + +Similarly, when the "recursive" merge strategy runs, and finds that +there are criss-cross merges and thus more than one merge base (which is +fairly unusual, but it does happen), it will generate one temporary +midway tree (or possibly even more, if you had lots of criss-crossing +merges and more than two merge bases) as a temporary internal merge +base, and again, those are real objects, but the end result will not end +up pointing to them, so they end up "dangling" in your repository. + +Generally, dangling objects aren't anything to worry about. They can +even be very useful: if you screw something up, the dangling objects can +be how you recover your old tree (say, you did a rebase, and realized +that you really didn't want to--you can look at what dangling objects +you have, and decide to reset your head to some old dangling state). + +For commits, you can just use: + +------------------------------------------------ +$ gitk <dangling-commit-sha-goes-here> --not --all +------------------------------------------------ + +This asks for all the history reachable from the given commit but not +from any branch, tag, or other reference. If you decide it's something +you want, you can always create a new reference to it, e.g., + +------------------------------------------------ +$ git branch recovered-branch <dangling-commit-sha-goes-here> +------------------------------------------------ + +For blobs and trees, you can't do the same, but you can still examine +them. You can just do + +------------------------------------------------ +$ git show <dangling-blob/tree-sha-goes-here> +------------------------------------------------ + +to show what the contents of the blob were (or, for a tree, basically +what the "ls" for that directory was), and that may give you some idea +of what the operation was that left that dangling object. + +Usually, dangling blobs and trees aren't very interesting. They're +almost always the result of either being a half-way mergebase (the blob +will often even have the conflict markers from a merge in it, if you +have had conflicting merges that you fixed up by hand), or simply +because you interrupted a "git fetch" with ^C or something like that, +leaving _some_ of the new objects in the object database, but just +dangling and useless. + +Anyway, once you are sure that you're not interested in any dangling +state, you can just prune all unreachable objects: + +------------------------------------------------ +$ git prune +------------------------------------------------ + +and they'll be gone. But you should only run "git prune" on a quiescent +repository--it's kind of like doing a filesystem fsck recovery: you +don't want to do that while the filesystem is mounted. + +(The same is true of "git-fsck" itself, btw, but since +git-fsck never actually *changes* the repository, it just reports +on what it found, git-fsck itself is never "dangerous" to run. +Running it while somebody is actually changing the repository can cause +confusing and scary messages, but it won't actually do anything bad. In +contrast, running "git prune" while somebody is actively changing the +repository is a *BAD* idea). + +[[recovering-from-repository-corruption]] +Recovering from repository corruption +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By design, git treats data trusted to it with caution. However, even in +the absence of bugs in git itself, it is still possible that hardware or +operating system errors could corrupt data. + +The first defense against such problems is backups. You can back up a +git directory using clone, or just using cp, tar, or any other backup +mechanism. + +As a last resort, you can search for the corrupted objects and attempt +to replace them by hand. Back up your repository before attempting this +in case you corrupt things even more in the process. + +We'll assume that the problem is a single missing or corrupted blob, +which is sometimes a solvable problem. (Recovering missing trees and +especially commits is *much* harder). + +Before starting, verify that there is corruption, and figure out where +it is with linkgit:git-fsck[1]; this may be time-consuming. + +Assume the output looks like this: + +------------------------------------------------ +$ git-fsck --full +broken link from tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8 + to blob 4b9458b3786228369c63936db65827de3cc06200 +missing blob 4b9458b3786228369c63936db65827de3cc06200 +------------------------------------------------ + +(Typically there will be some "dangling object" messages too, but they +aren't interesting.) + +Now you know that blob 4b9458b3 is missing, and that the tree 2d9263c6 +points to it. If you could find just one copy of that missing blob +object, possibly in some other repository, you could move it into +.git/objects/4b/9458b3... and be done. Suppose you can't. You can +still examine the tree that pointed to it with linkgit:git-ls-tree[1], +which might output something like: + +------------------------------------------------ +$ git ls-tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8 +100644 blob 8d14531846b95bfa3564b58ccfb7913a034323b8 .gitignore +100644 blob ebf9bf84da0aab5ed944264a5db2a65fe3a3e883 .mailmap +100644 blob ca442d313d86dc67e0a2e5d584b465bd382cbf5c COPYING +... +100644 blob 4b9458b3786228369c63936db65827de3cc06200 myfile +... +------------------------------------------------ + +So now you know that the missing blob was the data for a file named +"myfile". And chances are you can also identify the directory--let's +say it's in "somedirectory". If you're lucky the missing copy might be +the same as the copy you have checked out in your working tree at +"somedirectory/myfile"; you can test whether that's right with +linkgit:git-hash-object[1]: + +------------------------------------------------ +$ git hash-object -w somedirectory/myfile +------------------------------------------------ + +which will create and store a blob object with the contents of +somedirectory/myfile, and output the sha1 of that object. if you're +extremely lucky it might be 4b9458b3786228369c63936db65827de3cc06200, in +which case you've guessed right, and the corruption is fixed! + +Otherwise, you need more information. How do you tell which version of +the file has been lost? + +The easiest way to do this is with: + +------------------------------------------------ +$ git log --raw --all --full-history -- somedirectory/myfile +------------------------------------------------ + +Because you're asking for raw output, you'll now get something like + +------------------------------------------------ +commit abc +Author: +Date: +... +:100644 100644 4b9458b... newsha... M somedirectory/myfile + + +commit xyz +Author: +Date: + +... +:100644 100644 oldsha... 4b9458b... M somedirectory/myfile +------------------------------------------------ + +This tells you that the immediately preceding version of the file was +"newsha", and that the immediately following version was "oldsha". +You also know the commit messages that went with the change from oldsha +to 4b9458b and with the change from 4b9458b to newsha. + +If you've been committing small enough changes, you may now have a good +shot at reconstructing the contents of the in-between state 4b9458b. + +If you can do that, you can now recreate the missing object with + +------------------------------------------------ +$ git hash-object -w <recreated-file> +------------------------------------------------ + +and your repository is good again! + +(Btw, you could have ignored the fsck, and started with doing a + +------------------------------------------------ +$ git log --raw --all +------------------------------------------------ + +and just looked for the sha of the missing object (4b9458b..) in that +whole thing. It's up to you - git does *have* a lot of information, it is +just missing one particular blob version. + +[[the-index]] +The index +----------- + +The index is a binary file (generally kept in .git/index) containing a +sorted list of path names, each with permissions and the SHA1 of a blob +object; linkgit:git-ls-files[1] can show you the contents of the index: + +------------------------------------------------- +$ git ls-files --stage +100644 63c918c667fa005ff12ad89437f2fdc80926e21c 0 .gitignore +100644 5529b198e8d14decbe4ad99db3f7fb632de0439d 0 .mailmap +100644 6ff87c4664981e4397625791c8ea3bbb5f2279a3 0 COPYING +100644 a37b2152bd26be2c2289e1f57a292534a51a93c7 0 Documentation/.gitignore +100644 fbefe9a45b00a54b58d94d06eca48b03d40a50e0 0 Documentation/Makefile +... +100644 2511aef8d89ab52be5ec6a5e46236b4b6bcd07ea 0 xdiff/xtypes.h +100644 2ade97b2574a9f77e7ae4002a4e07a6a38e46d07 0 xdiff/xutils.c +100644 d5de8292e05e7c36c4b68857c1cf9855e3d2f70a 0 xdiff/xutils.h +------------------------------------------------- + +Note that in older documentation you may see the index called the +"current directory cache" or just the "cache". It has three important +properties: + +1. The index contains all the information necessary to generate a single +(uniquely determined) tree object. ++ +For example, running linkgit:git-commit[1] generates this tree object +from the index, stores it in the object database, and uses it as the +tree object associated with the new commit. + +2. The index enables fast comparisons between the tree object it defines +and the working tree. ++ +It does this by storing some additional data for each entry (such as +the last modified time). This data is not displayed above, and is not +stored in the created tree object, but it can be used to determine +quickly which files in the working directory differ from what was +stored in the index, and thus save git from having to read all of the +data from such files to look for changes. + +3. It can efficiently represent information about merge conflicts +between different tree objects, allowing each pathname to be +associated with sufficient information about the trees involved that +you can create a three-way merge between them. ++ +We saw in <<conflict-resolution>> that during a merge the index can +store multiple versions of a single file (called "stages"). The third +column in the linkgit:git-ls-files[1] output above is the stage +number, and will take on values other than 0 for files with merge +conflicts. + +The index is thus a sort of temporary staging area, which is filled with +a tree which you are in the process of working on. + +If you blow the index away entirely, you generally haven't lost any +information as long as you have the name of the tree that it described. + +[[submodules]] +Submodules +========== + +Large projects are often composed of smaller, self-contained modules. For +example, an embedded Linux distribution's source tree would include every +piece of software in the distribution with some local modifications; a movie +player might need to build against a specific, known-working version of a +decompression library; several independent programs might all share the same +build scripts. + +With centralized revision control systems this is often accomplished by +including every module in one single repository. Developers can check out +all modules or only the modules they need to work with. They can even modify +files across several modules in a single commit while moving things around +or updating APIs and translations. + +Git does not allow partial checkouts, so duplicating this approach in Git +would force developers to keep a local copy of modules they are not +interested in touching. Commits in an enormous checkout would be slower +than you'd expect as Git would have to scan every directory for changes. +If modules have a lot of local history, clones would take forever. + +On the plus side, distributed revision control systems can much better +integrate with external sources. In a centralized model, a single arbitrary +snapshot of the external project is exported from its own revision control +and then imported into the local revision control on a vendor branch. All +the history is hidden. With distributed revision control you can clone the +entire external history and much more easily follow development and re-merge +local changes. + +Git's submodule support allows a repository to contain, as a subdirectory, a +checkout of an external project. Submodules maintain their own identity; +the submodule support just stores the submodule repository location and +commit ID, so other developers who clone the containing project +("superproject") can easily clone all the submodules at the same revision. +Partial checkouts of the superproject are possible: you can tell Git to +clone none, some or all of the submodules. + +The linkgit:git-submodule[1] command is available since Git 1.5.3. Users +with Git 1.5.2 can look up the submodule commits in the repository and +manually check them out; earlier versions won't recognize the submodules at +all. + +To see how submodule support works, create (for example) four example +repositories that can be used later as a submodule: + +------------------------------------------------- +$ mkdir ~/git +$ cd ~/git +$ for i in a b c d +do + mkdir $i + cd $i + git init + echo "module $i" > $i.txt + git add $i.txt + git commit -m "Initial commit, submodule $i" + cd .. +done +------------------------------------------------- + +Now create the superproject and add all the submodules: + +------------------------------------------------- +$ mkdir super +$ cd super +$ git init +$ for i in a b c d +do + git submodule add ~/git/$i +done +------------------------------------------------- + +NOTE: Do not use local URLs here if you plan to publish your superproject! + +See what files `git submodule` created: + +------------------------------------------------- +$ ls -a +. .. .git .gitmodules a b c d +------------------------------------------------- + +The `git submodule add` command does a couple of things: + +- It clones the submodule under the current directory and by default checks out + the master branch. +- It adds the submodule's clone path to the linkgit:gitmodules[5] file and + adds this file to the index, ready to be committed. +- It adds the submodule's current commit ID to the index, ready to be + committed. + +Commit the superproject: + +------------------------------------------------- +$ git commit -m "Add submodules a, b, c and d." +------------------------------------------------- + +Now clone the superproject: + +------------------------------------------------- +$ cd .. +$ git clone super cloned +$ cd cloned +------------------------------------------------- + +The submodule directories are there, but they're empty: + +------------------------------------------------- +$ ls -a a +. .. +$ git submodule status +-d266b9873ad50488163457f025db7cdd9683d88b a +-e81d457da15309b4fef4249aba9b50187999670d b +-c1536a972b9affea0f16e0680ba87332dc059146 c +-d96249ff5d57de5de093e6baff9e0aafa5276a74 d +------------------------------------------------- + +NOTE: The commit object names shown above would be different for you, but they +should match the HEAD commit object names of your repositories. You can check +it by running `git ls-remote ../a`. + +Pulling down the submodules is a two-step process. First run `git submodule +init` to add the submodule repository URLs to `.git/config`: + +------------------------------------------------- +$ git submodule init +------------------------------------------------- + +Now use `git submodule update` to clone the repositories and check out the +commits specified in the superproject: + +------------------------------------------------- +$ git submodule update +$ cd a +$ ls -a +. .. .git a.txt +------------------------------------------------- + +One major difference between `git submodule update` and `git submodule add` is +that `git submodule update` checks out a specific commit, rather than the tip +of a branch. It's like checking out a tag: the head is detached, so you're not +working on a branch. + +------------------------------------------------- +$ git branch +* (no branch) + master +------------------------------------------------- + +If you want to make a change within a submodule and you have a detached head, +then you should create or checkout a branch, make your changes, publish the +change within the submodule, and then update the superproject to reference the +new commit: + +------------------------------------------------- +$ git checkout master +------------------------------------------------- + +or + +------------------------------------------------- +$ git checkout -b fix-up +------------------------------------------------- + +then + +------------------------------------------------- +$ echo "adding a line again" >> a.txt +$ git commit -a -m "Updated the submodule from within the superproject." +$ git push +$ cd .. +$ git diff +diff --git a/a b/a +index d266b98..261dfac 160000 +--- a/a ++++ b/a +@@ -1 +1 @@ +-Subproject commit d266b9873ad50488163457f025db7cdd9683d88b ++Subproject commit 261dfac35cb99d380eb966e102c1197139f7fa24 +$ git add a +$ git commit -m "Updated submodule a." +$ git push +------------------------------------------------- + +You have to run `git submodule update` after `git pull` if you want to update +submodules, too. + +Pitfalls with submodules +------------------------ + +Always publish the submodule change before publishing the change to the +superproject that references it. If you forget to publish the submodule change, +others won't be able to clone the repository: + +------------------------------------------------- +$ cd ~/git/super/a +$ echo i added another line to this file >> a.txt +$ git commit -a -m "doing it wrong this time" +$ cd .. +$ git add a +$ git commit -m "Updated submodule a again." +$ git push +$ cd ~/git/cloned +$ git pull +$ git submodule update +error: pathspec '261dfac35cb99d380eb966e102c1197139f7fa24' did not match any file(s) known to git. +Did you forget to 'git add'? +Unable to checkout '261dfac35cb99d380eb966e102c1197139f7fa24' in submodule path 'a' +------------------------------------------------- + +You also should not rewind branches in a submodule beyond commits that were +ever recorded in any superproject. + +It's not safe to run `git submodule update` if you've made and committed +changes within a submodule without checking out a branch first. They will be +silently overwritten: + +------------------------------------------------- +$ cat a.txt +module a +$ echo line added from private2 >> a.txt +$ git commit -a -m "line added inside private2" +$ cd .. +$ git submodule update +Submodule path 'a': checked out 'd266b9873ad50488163457f025db7cdd9683d88b' +$ cd a +$ cat a.txt +module a +------------------------------------------------- + +NOTE: The changes are still visible in the submodule's reflog. + +This is not the case if you did not commit your changes. + +[[low-level-operations]] +Low-level git operations +======================== + +Many of the higher-level commands were originally implemented as shell +scripts using a smaller core of low-level git commands. These can still +be useful when doing unusual things with git, or just as a way to +understand its inner workings. + +[[object-manipulation]] +Object access and manipulation +------------------------------ + +The linkgit:git-cat-file[1] command can show the contents of any object, +though the higher-level linkgit:git-show[1] is usually more useful. + +The linkgit:git-commit-tree[1] command allows constructing commits with +arbitrary parents and trees. + +A tree can be created with linkgit:git-write-tree[1] and its data can be +accessed by linkgit:git-ls-tree[1]. Two trees can be compared with +linkgit:git-diff-tree[1]. + +A tag is created with linkgit:git-mktag[1], and the signature can be +verified by linkgit:git-verify-tag[1], though it is normally simpler to +use linkgit:git-tag[1] for both. + +[[the-workflow]] +The Workflow +------------ + +High-level operations such as linkgit:git-commit[1], +linkgit:git-checkout[1] and linkgit:git-reset[1] work by moving data +between the working tree, the index, and the object database. Git +provides low-level operations which perform each of these steps +individually. + +Generally, all "git" operations work on the index file. Some operations +work *purely* on the index file (showing the current state of the +index), but most operations move data between the index file and either +the database or the working directory. Thus there are four main +combinations: + +[[working-directory-to-index]] +working directory -> index +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The linkgit:git-update-index[1] command updates the index with +information from the working directory. You generally update the +index information by just specifying the filename you want to update, +like so: + +------------------------------------------------- +$ git update-index filename +------------------------------------------------- + +but to avoid common mistakes with filename globbing etc, the command +will not normally add totally new entries or remove old entries, +i.e. it will normally just update existing cache entries. + +To tell git that yes, you really do realize that certain files no +longer exist, or that new files should be added, you +should use the `--remove` and `--add` flags respectively. + +NOTE! A `--remove` flag does 'not' mean that subsequent filenames will +necessarily be removed: if the files still exist in your directory +structure, the index will be updated with their new status, not +removed. The only thing `--remove` means is that update-index will be +considering a removed file to be a valid thing, and if the file really +does not exist any more, it will update the index accordingly. + +As a special case, you can also do `git-update-index --refresh`, which +will refresh the "stat" information of each index to match the current +stat information. It will 'not' update the object status itself, and +it will only update the fields that are used to quickly test whether +an object still matches its old backing store object. + +The previously introduced linkgit:git-add[1] is just a wrapper for +linkgit:git-update-index[1]. + +[[index-to-object-database]] +index -> object database +~~~~~~~~~~~~~~~~~~~~~~~~ + +You write your current index file to a "tree" object with the program + +------------------------------------------------- +$ git write-tree +------------------------------------------------- + +that doesn't come with any options--it will just write out the +current index into the set of tree objects that describe that state, +and it will return the name of the resulting top-level tree. You can +use that tree to re-generate the index at any time by going in the +other direction: + +[[object-database-to-index]] +object database -> index +~~~~~~~~~~~~~~~~~~~~~~~~ + +You read a "tree" file from the object database, and use that to +populate (and overwrite--don't do this if your index contains any +unsaved state that you might want to restore later!) your current +index. Normal operation is just + +------------------------------------------------- +$ git-read-tree <sha1 of tree> +------------------------------------------------- + +and your index file will now be equivalent to the tree that you saved +earlier. However, that is only your 'index' file: your working +directory contents have not been modified. + +[[index-to-working-directory]] +index -> working directory +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +You update your working directory from the index by "checking out" +files. This is not a very common operation, since normally you'd just +keep your files updated, and rather than write to your working +directory, you'd tell the index files about the changes in your +working directory (i.e. `git-update-index`). + +However, if you decide to jump to a new version, or check out somebody +else's version, or just restore a previous tree, you'd populate your +index file with read-tree, and then you need to check out the result +with + +------------------------------------------------- +$ git-checkout-index filename +------------------------------------------------- + +or, if you want to check out all of the index, use `-a`. + +NOTE! git-checkout-index normally refuses to overwrite old files, so +if you have an old version of the tree already checked out, you will +need to use the "-f" flag ('before' the "-a" flag or the filename) to +'force' the checkout. + + +Finally, there are a few odds and ends which are not purely moving +from one representation to the other: + +[[tying-it-all-together]] +Tying it all together +~~~~~~~~~~~~~~~~~~~~~ + +To commit a tree you have instantiated with "git-write-tree", you'd +create a "commit" object that refers to that tree and the history +behind it--most notably the "parent" commits that preceded it in +history. + +Normally a "commit" has one parent: the previous state of the tree +before a certain change was made. However, sometimes it can have two +or more parent commits, in which case we call it a "merge", due to the +fact that such a commit brings together ("merges") two or more +previous states represented by other commits. + +In other words, while a "tree" represents a particular directory state +of a working directory, a "commit" represents that state in "time", +and explains how we got there. + +You create a commit object by giving it the tree that describes the +state at the time of the commit, and a list of parents: + +------------------------------------------------- +$ git-commit-tree <tree> -p <parent> [-p <parent2> ..] +------------------------------------------------- + +and then giving the reason for the commit on stdin (either through +redirection from a pipe or file, or by just typing it at the tty). + +git-commit-tree will return the name of the object that represents +that commit, and you should save it away for later use. Normally, +you'd commit a new `HEAD` state, and while git doesn't care where you +save the note about that state, in practice we tend to just write the +result to the file pointed at by `.git/HEAD`, so that we can always see +what the last committed state was. + +Here is an ASCII art by Jon Loeliger that illustrates how +various pieces fit together. + +------------ + + commit-tree + commit obj + +----+ + | | + | | + V V + +-----------+ + | Object DB | + | Backing | + | Store | + +-----------+ + ^ + write-tree | | + tree obj | | + | | read-tree + | | tree obj + V + +-----------+ + | Index | + | "cache" | + +-----------+ + update-index ^ + blob obj | | + | | + checkout-index -u | | checkout-index + stat | | blob obj + V + +-----------+ + | Working | + | Directory | + +-----------+ + +------------ + + +[[examining-the-data]] +Examining the data +------------------ + +You can examine the data represented in the object database and the +index with various helper tools. For every object, you can use +linkgit:git-cat-file[1] to examine details about the +object: + +------------------------------------------------- +$ git-cat-file -t <objectname> +------------------------------------------------- + +shows the type of the object, and once you have the type (which is +usually implicit in where you find the object), you can use + +------------------------------------------------- +$ git-cat-file blob|tree|commit|tag <objectname> +------------------------------------------------- + +to show its contents. NOTE! Trees have binary content, and as a result +there is a special helper for showing that content, called +`git-ls-tree`, which turns the binary content into a more easily +readable form. + +It's especially instructive to look at "commit" objects, since those +tend to be small and fairly self-explanatory. In particular, if you +follow the convention of having the top commit name in `.git/HEAD`, +you can do + +------------------------------------------------- +$ git-cat-file commit HEAD +------------------------------------------------- + +to see what the top commit was. + +[[merging-multiple-trees]] +Merging multiple trees +---------------------- + +Git helps you do a three-way merge, which you can expand to n-way by +repeating the merge procedure arbitrary times until you finally +"commit" the state. The normal situation is that you'd only do one +three-way merge (two parents), and commit it, but if you like to, you +can do multiple parents in one go. + +To do a three-way merge, you need the two sets of "commit" objects +that you want to merge, use those to find the closest common parent (a +third "commit" object), and then use those commit objects to find the +state of the directory ("tree" object) at these points. + +To get the "base" for the merge, you first look up the common parent +of two commits with + +------------------------------------------------- +$ git-merge-base <commit1> <commit2> +------------------------------------------------- + +which will return you the commit they are both based on. You should +now look up the "tree" objects of those commits, which you can easily +do with (for example) + +------------------------------------------------- +$ git-cat-file commit <commitname> | head -1 +------------------------------------------------- + +since the tree object information is always the first line in a commit +object. + +Once you know the three trees you are going to merge (the one "original" +tree, aka the common tree, and the two "result" trees, aka the branches +you want to merge), you do a "merge" read into the index. This will +complain if it has to throw away your old index contents, so you should +make sure that you've committed those--in fact you would normally +always do a merge against your last commit (which should thus match what +you have in your current index anyway). + +To do the merge, do + +------------------------------------------------- +$ git-read-tree -m -u <origtree> <yourtree> <targettree> +------------------------------------------------- + +which will do all trivial merge operations for you directly in the +index file, and you can just write the result out with +`git-write-tree`. + + +[[merging-multiple-trees-2]] +Merging multiple trees, continued +--------------------------------- + +Sadly, many merges aren't trivial. If there are files that have +been added, moved or removed, or if both branches have modified the +same file, you will be left with an index tree that contains "merge +entries" in it. Such an index tree can 'NOT' be written out to a tree +object, and you will have to resolve any such merge clashes using +other tools before you can write out the result. + +You can examine such index state with `git-ls-files --unmerged` +command. An example: + +------------------------------------------------ +$ git-read-tree -m $orig HEAD $target +$ git-ls-files --unmerged +100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello.c +100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello.c +100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello.c +------------------------------------------------ + +Each line of the `git-ls-files --unmerged` output begins with +the blob mode bits, blob SHA1, 'stage number', and the +filename. The 'stage number' is git's way to say which tree it +came from: stage 1 corresponds to `$orig` tree, stage 2 `HEAD` +tree, and stage3 `$target` tree. + +Earlier we said that trivial merges are done inside +`git-read-tree -m`. For example, if the file did not change +from `$orig` to `HEAD` nor `$target`, or if the file changed +from `$orig` to `HEAD` and `$orig` to `$target` the same way, +obviously the final outcome is what is in `HEAD`. What the +above example shows is that file `hello.c` was changed from +`$orig` to `HEAD` and `$orig` to `$target` in a different way. +You could resolve this by running your favorite 3-way merge +program, e.g. `diff3`, `merge`, or git's own merge-file, on +the blob objects from these three stages yourself, like this: + +------------------------------------------------ +$ git-cat-file blob 263414f... >hello.c~1 +$ git-cat-file blob 06fa6a2... >hello.c~2 +$ git-cat-file blob cc44c73... >hello.c~3 +$ git merge-file hello.c~2 hello.c~1 hello.c~3 +------------------------------------------------ + +This would leave the merge result in `hello.c~2` file, along +with conflict markers if there are conflicts. After verifying +the merge result makes sense, you can tell git what the final +merge result for this file is by: + +------------------------------------------------- +$ mv -f hello.c~2 hello.c +$ git-update-index hello.c +------------------------------------------------- + +When a path is in unmerged state, running `git-update-index` for +that path tells git to mark the path resolved. + +The above is the description of a git merge at the lowest level, +to help you understand what conceptually happens under the hood. +In practice, nobody, not even git itself, uses three `git-cat-file` +for this. There is `git-merge-index` program that extracts the +stages to temporary files and calls a "merge" script on it: + +------------------------------------------------- +$ git-merge-index git-merge-one-file hello.c +------------------------------------------------- + +and that is what higher level `git merge -s resolve` is implemented with. + +[[hacking-git]] +Hacking git +=========== + +This chapter covers internal details of the git implementation which +probably only git developers need to understand. + +[[object-details]] +Object storage format +--------------------- + +All objects have a statically determined "type" which identifies the +format of the object (i.e. how it is used, and how it can refer to other +objects). There are currently four different object types: "blob", +"tree", "commit", and "tag". + +Regardless of object type, all objects share the following +characteristics: they are all deflated with zlib, and have a header +that not only specifies their type, but also provides size information +about the data in the object. It's worth noting that the SHA1 hash +that is used to name the object is the hash of the original data +plus this header, so `sha1sum` 'file' does not match the object name +for 'file'. +(Historical note: in the dawn of the age of git the hash +was the sha1 of the 'compressed' object.) + +As a result, the general consistency of an object can always be tested +independently of the contents or the type of the object: all objects can +be validated by verifying that (a) their hashes match the content of the +file and (b) the object successfully inflates to a stream of bytes that +forms a sequence of <ascii type without space> {plus} <space> {plus} <ascii decimal +size> {plus} <byte\0> {plus} <binary object data>. + +The structured objects can further have their structure and +connectivity to other objects verified. This is generally done with +the `git-fsck` program, which generates a full dependency graph +of all objects, and verifies their internal consistency (in addition +to just verifying their superficial consistency through the hash). + +[[birdview-on-the-source-code]] +A birds-eye view of Git's source code +------------------------------------- + +It is not always easy for new developers to find their way through Git's +source code. This section gives you a little guidance to show where to +start. + +A good place to start is with the contents of the initial commit, with: + +---------------------------------------------------- +$ git checkout e83c5163 +---------------------------------------------------- + +The initial revision lays the foundation for almost everything git has +today, but is small enough to read in one sitting. + +Note that terminology has changed since that revision. For example, the +README in that revision uses the word "changeset" to describe what we +now call a <<def_commit_object,commit>>. + +Also, we do not call it "cache" any more, but "index", however, the +file is still called `cache.h`. Remark: Not much reason to change it now, +especially since there is no good single name for it anyway, because it is +basically _the_ header file which is included by _all_ of Git's C sources. + +If you grasp the ideas in that initial commit, you should check out a +more recent version and skim `cache.h`, `object.h` and `commit.h`. + +In the early days, Git (in the tradition of UNIX) was a bunch of programs +which were extremely simple, and which you used in scripts, piping the +output of one into another. This turned out to be good for initial +development, since it was easier to test new things. However, recently +many of these parts have become builtins, and some of the core has been +"libified", i.e. put into libgit.a for performance, portability reasons, +and to avoid code duplication. + +By now, you know what the index is (and find the corresponding data +structures in `cache.h`), and that there are just a couple of object types +(blobs, trees, commits and tags) which inherit their common structure from +`struct object`, which is their first member (and thus, you can cast e.g. +`(struct object *)commit` to achieve the _same_ as `&commit->object`, i.e. +get at the object name and flags). + +Now is a good point to take a break to let this information sink in. + +Next step: get familiar with the object naming. Read <<naming-commits>>. +There are quite a few ways to name an object (and not only revisions!). +All of these are handled in `sha1_name.c`. Just have a quick look at +the function `get_sha1()`. A lot of the special handling is done by +functions like `get_sha1_basic()` or the likes. + +This is just to get you into the groove for the most libified part of Git: +the revision walker. + +Basically, the initial version of `git log` was a shell script: + +---------------------------------------------------------------- +$ git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \ + LESS=-S ${PAGER:-less} +---------------------------------------------------------------- + +What does this mean? + +`git-rev-list` is the original version of the revision walker, which +_always_ printed a list of revisions to stdout. It is still functional, +and needs to, since most new Git programs start out as scripts using +`git-rev-list`. + +`git-rev-parse` is not as important any more; it was only used to filter out +options that were relevant for the different plumbing commands that were +called by the script. + +Most of what `git-rev-list` did is contained in `revision.c` and +`revision.h`. It wraps the options in a struct named `rev_info`, which +controls how and what revisions are walked, and more. + +The original job of `git-rev-parse` is now taken by the function +`setup_revisions()`, which parses the revisions and the common command line +options for the revision walker. This information is stored in the struct +`rev_info` for later consumption. You can do your own command line option +parsing after calling `setup_revisions()`. After that, you have to call +`prepare_revision_walk()` for initialization, and then you can get the +commits one by one with the function `get_revision()`. + +If you are interested in more details of the revision walking process, +just have a look at the first implementation of `cmd_log()`; call +`git-show v1.3.0~155^2~4` and scroll down to that function (note that you +no longer need to call `setup_pager()` directly). + +Nowadays, `git log` is a builtin, which means that it is _contained_ in the +command `git`. The source side of a builtin is + +- a function called `cmd_<bla>`, typically defined in `builtin-<bla>.c`, + and declared in `builtin.h`, + +- an entry in the `commands[]` array in `git.c`, and + +- an entry in `BUILTIN_OBJECTS` in the `Makefile`. + +Sometimes, more than one builtin is contained in one source file. For +example, `cmd_whatchanged()` and `cmd_log()` both reside in `builtin-log.c`, +since they share quite a bit of code. In that case, the commands which are +_not_ named like the `.c` file in which they live have to be listed in +`BUILT_INS` in the `Makefile`. + +`git log` looks more complicated in C than it does in the original script, +but that allows for a much greater flexibility and performance. + +Here again it is a good point to take a pause. + +Lesson three is: study the code. Really, it is the best way to learn about +the organization of Git (after you know the basic concepts). + +So, think about something which you are interested in, say, "how can I +access a blob just knowing the object name of it?". The first step is to +find a Git command with which you can do it. In this example, it is either +`git show` or `git cat-file`. + +For the sake of clarity, let's stay with `git cat-file`, because it + +- is plumbing, and + +- was around even in the initial commit (it literally went only through + some 20 revisions as `cat-file.c`, was renamed to `builtin-cat-file.c` + when made a builtin, and then saw less than 10 versions). + +So, look into `builtin-cat-file.c`, search for `cmd_cat_file()` and look what +it does. + +------------------------------------------------------------------ + git_config(git_default_config); + if (argc != 3) + usage("git-cat-file [-t|-s|-e|-p|<type>] <sha1>"); + if (get_sha1(argv[2], sha1)) + die("Not a valid object name %s", argv[2]); +------------------------------------------------------------------ + +Let's skip over the obvious details; the only really interesting part +here is the call to `get_sha1()`. It tries to interpret `argv[2]` as an +object name, and if it refers to an object which is present in the current +repository, it writes the resulting SHA-1 into the variable `sha1`. + +Two things are interesting here: + +- `get_sha1()` returns 0 on _success_. This might surprise some new + Git hackers, but there is a long tradition in UNIX to return different + negative numbers in case of different errors--and 0 on success. + +- the variable `sha1` in the function signature of `get_sha1()` is `unsigned + char \*`, but is actually expected to be a pointer to `unsigned + char[20]`. This variable will contain the 160-bit SHA-1 of the given + commit. Note that whenever a SHA-1 is passed as `unsigned char \*`, it + is the binary representation, as opposed to the ASCII representation in + hex characters, which is passed as `char *`. + +You will see both of these things throughout the code. + +Now, for the meat: + +----------------------------------------------------------------------------- + case 0: + buf = read_object_with_reference(sha1, argv[1], &size, NULL); +----------------------------------------------------------------------------- + +This is how you read a blob (actually, not only a blob, but any type of +object). To know how the function `read_object_with_reference()` actually +works, find the source code for it (something like `git grep +read_object_with | grep ":[a-z]"` in the git repository), and read +the source. + +To find out how the result can be used, just read on in `cmd_cat_file()`: + +----------------------------------- + write_or_die(1, buf, size); +----------------------------------- + +Sometimes, you do not know where to look for a feature. In many such cases, +it helps to search through the output of `git log`, and then `git show` the +corresponding commit. + +Example: If you know that there was some test case for `git bundle`, but +do not remember where it was (yes, you _could_ `git grep bundle t/`, but that +does not illustrate the point!): + +------------------------ +$ git log --no-merges t/ +------------------------ + +In the pager (`less`), just search for "bundle", go a few lines back, +and see that it is in commit 18449ab0... Now just copy this object name, +and paste it into the command line + +------------------- +$ git show 18449ab0 +------------------- + +Voila. + +Another example: Find out what to do in order to make some script a +builtin: + +------------------------------------------------- +$ git log --no-merges --diff-filter=A builtin-*.c +------------------------------------------------- + +You see, Git is actually the best tool to find out about the source of Git +itself! + +[[glossary]] +include::glossary.txt[] + +[[git-quick-start]] +Appendix A: Git Quick Reference +=============================== + +This is a quick summary of the major commands; the previous chapters +explain how these work in more detail. + +[[quick-creating-a-new-repository]] +Creating a new repository +------------------------- + +From a tarball: + +----------------------------------------------- +$ tar xzf project.tar.gz +$ cd project +$ git init +Initialized empty Git repository in .git/ +$ git add . +$ git commit +----------------------------------------------- + +From a remote repository: + +----------------------------------------------- +$ git clone git://example.com/pub/project.git +$ cd project +----------------------------------------------- + +[[managing-branches]] +Managing branches +----------------- + +----------------------------------------------- +$ git branch # list all local branches in this repo +$ git checkout test # switch working directory to branch "test" +$ git branch new # create branch "new" starting at current HEAD +$ git branch -d new # delete branch "new" +----------------------------------------------- + +Instead of basing a new branch on current HEAD (the default), use: + +----------------------------------------------- +$ git branch new test # branch named "test" +$ git branch new v2.6.15 # tag named v2.6.15 +$ git branch new HEAD^ # commit before the most recent +$ git branch new HEAD^^ # commit before that +$ git branch new test~10 # ten commits before tip of branch "test" +----------------------------------------------- + +Create and switch to a new branch at the same time: + +----------------------------------------------- +$ git checkout -b new v2.6.15 +----------------------------------------------- + +Update and examine branches from the repository you cloned from: + +----------------------------------------------- +$ git fetch # update +$ git branch -r # list + origin/master + origin/next + ... +$ git checkout -b masterwork origin/master +----------------------------------------------- + +Fetch a branch from a different repository, and give it a new +name in your repository: + +----------------------------------------------- +$ git fetch git://example.com/project.git theirbranch:mybranch +$ git fetch git://example.com/project.git v2.6.15:mybranch +----------------------------------------------- + +Keep a list of repositories you work with regularly: + +----------------------------------------------- +$ git remote add example git://example.com/project.git +$ git remote # list remote repositories +example +origin +$ git remote show example # get details +* remote example + URL: git://example.com/project.git + Tracked remote branches + master next ... +$ git fetch example # update branches from example +$ git branch -r # list all remote branches +----------------------------------------------- + + +[[exploring-history]] +Exploring history +----------------- + +----------------------------------------------- +$ gitk # visualize and browse history +$ git log # list all commits +$ git log src/ # ...modifying src/ +$ git log v2.6.15..v2.6.16 # ...in v2.6.16, not in v2.6.15 +$ git log master..test # ...in branch test, not in branch master +$ git log test..master # ...in branch master, but not in test +$ git log test...master # ...in one branch, not in both +$ git log -S'foo()' # ...where difference contain "foo()" +$ git log --since="2 weeks ago" +$ git log -p # show patches as well +$ git show # most recent commit +$ git diff v2.6.15..v2.6.16 # diff between two tagged versions +$ git diff v2.6.15..HEAD # diff with current head +$ git grep "foo()" # search working directory for "foo()" +$ git grep v2.6.15 "foo()" # search old tree for "foo()" +$ git show v2.6.15:a.txt # look at old version of a.txt +----------------------------------------------- + +Search for regressions: + +----------------------------------------------- +$ git bisect start +$ git bisect bad # current version is bad +$ git bisect good v2.6.13-rc2 # last known good revision +Bisecting: 675 revisions left to test after this + # test here, then: +$ git bisect good # if this revision is good, or +$ git bisect bad # if this revision is bad. + # repeat until done. +----------------------------------------------- + +[[making-changes]] +Making changes +-------------- + +Make sure git knows who to blame: + +------------------------------------------------ +$ cat >>~/.gitconfig <<\EOF +[user] + name = Your Name Comes Here + email = you@yourdomain.example.com +EOF +------------------------------------------------ + +Select file contents to include in the next commit, then make the +commit: + +----------------------------------------------- +$ git add a.txt # updated file +$ git add b.txt # new file +$ git rm c.txt # old file +$ git commit +----------------------------------------------- + +Or, prepare and create the commit in one step: + +----------------------------------------------- +$ git commit d.txt # use latest content only of d.txt +$ git commit -a # use latest content of all tracked files +----------------------------------------------- + +[[merging]] +Merging +------- + +----------------------------------------------- +$ git merge test # merge branch "test" into the current branch +$ git pull git://example.com/project.git master + # fetch and merge in remote branch +$ git pull . test # equivalent to git merge test +----------------------------------------------- + +[[sharing-your-changes]] +Sharing your changes +-------------------- + +Importing or exporting patches: + +----------------------------------------------- +$ git format-patch origin..HEAD # format a patch for each commit + # in HEAD but not in origin +$ git am mbox # import patches from the mailbox "mbox" +----------------------------------------------- + +Fetch a branch in a different git repository, then merge into the +current branch: + +----------------------------------------------- +$ git pull git://example.com/project.git theirbranch +----------------------------------------------- + +Store the fetched branch into a local branch before merging into the +current branch: + +----------------------------------------------- +$ git pull git://example.com/project.git theirbranch:mybranch +----------------------------------------------- + +After creating commits on a local branch, update the remote +branch with your commits: + +----------------------------------------------- +$ git push ssh://example.com/project.git mybranch:theirbranch +----------------------------------------------- + +When remote and local branch are both named "test": + +----------------------------------------------- +$ git push ssh://example.com/project.git test +----------------------------------------------- + +Shortcut version for a frequently used remote repository: + +----------------------------------------------- +$ git remote add example ssh://example.com/project.git +$ git push example test +----------------------------------------------- + +[[repository-maintenance]] +Repository maintenance +---------------------- + +Check for corruption: + +----------------------------------------------- +$ git fsck +----------------------------------------------- + +Recompress, remove unused cruft: + +----------------------------------------------- +$ git gc +----------------------------------------------- + + +[[todo]] +Appendix B: Notes and todo list for this manual +=============================================== + +This is a work in progress. + +The basic requirements: + +- It must be readable in order, from beginning to end, by someone + intelligent with a basic grasp of the UNIX command line, but without + any special knowledge of git. If necessary, any other prerequisites + should be specifically mentioned as they arise. +- Whenever possible, section headings should clearly describe the task + they explain how to do, in language that requires no more knowledge + than necessary: for example, "importing patches into a project" rather + than "the git-am command" + +Think about how to create a clear chapter dependency graph that will +allow people to get to important topics without necessarily reading +everything in between. + +Scan Documentation/ for other stuff left out; in particular: + +- howto's +- some of technical/? +- hooks +- list of commands in linkgit:git[1] + +Scan email archives for other stuff left out + +Scan man pages to see if any assume more background than this manual +provides. + +Simplify beginning by suggesting disconnected head instead of +temporary branch creation? + +Add more good examples. Entire sections of just cookbook examples +might be a good idea; maybe make an "advanced examples" section a +standard end-of-chapter section? + +Include cross-references to the glossary, where appropriate. + +Document shallow clones? See draft 1.5.0 release notes for some +documentation. + +Add a section on working with other version control systems, including +CVS, Subversion, and just imports of series of release tarballs. + +More details on gitweb? + +Write a chapter on using plumbing and writing scripts. + +Alternates, clone -reference, etc. + +More on recovery from repository corruption. See: + http://marc.theaimsgroup.com/?l=git&m=117263864820799&w=2 + http://marc.theaimsgroup.com/?l=git&m=117147855503798&w=2 + http://marc.theaimsgroup.com/?l=git&m=117147855503798&w=2 |