diff options
Diffstat (limited to 'Documentation')
196 files changed, 8833 insertions, 1448 deletions
diff --git a/Documentation/CodingGuidelines b/Documentation/CodingGuidelines index c6e536f..a4191aa 100644 --- a/Documentation/CodingGuidelines +++ b/Documentation/CodingGuidelines @@ -171,6 +171,11 @@ For C programs: - We try to keep to at most 80 characters per line. + - As a Git developer we assume you have a reasonably modern compiler + and we recommend you to enable the DEVELOPER makefile knob to + ensure your patch is clear of all compiler warnings we care about, + by e.g. "echo DEVELOPER=1 >>config.mak". + - We try to support a wide range of C compilers to compile Git with, including old ones. That means that you should not use C99 initializers, even if a lot of compilers grok it. @@ -201,11 +206,38 @@ For C programs: x = 1; } - is frowned upon. A gray area is when the statement extends - over a few lines, and/or you have a lengthy comment atop of - it. Also, like in the Linux kernel, if there is a long list - of "else if" statements, it can make sense to add braces to - single line blocks. + is frowned upon. But there are a few exceptions: + + - When the statement extends over a few lines (e.g., a while loop + with an embedded conditional, or a comment). E.g.: + + while (foo) { + if (x) + one(); + else + two(); + } + + if (foo) { + /* + * This one requires some explanation, + * so we're better off with braces to make + * it obvious that the indentation is correct. + */ + doit(); + } + + - When there are multiple arms to a conditional and some of them + require braces, enclose even a single line block in braces for + consistency. E.g.: + + if (foo) { + doit(); + } else { + one(); + two(); + three(); + } - We try to avoid assignments in the condition of an "if" statement. @@ -521,12 +553,20 @@ Writing Documentation: modifying paragraphs or option/command explanations that contain options or commands: - Literal examples (e.g. use of command-line options, command names, and - configuration variables) are typeset in monospace, and if you can use - `backticks around word phrases`, do so. + Literal examples (e.g. use of command-line options, command names, + branch names, configuration and environment variables) must be + typeset in monospace (i.e. wrapped with backticks): `--pretty=oneline` `git rev-list` `remote.pushDefault` + `GIT_DIR` + `HEAD` + + An environment variable must be prefixed with "$" only when referring to its + value and not when referring to the variable itself, in this case there is + nothing to add except the backticks: + `GIT_DIR` is specified + `$GIT_DIR/hooks/pre-receive` Word phrases enclosed in `backtick characters` are rendered literally and will not be further expanded. The use of `backticks` to achieve the diff --git a/Documentation/Makefile b/Documentation/Makefile index 3e39e28..b5be2e2 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -76,6 +76,7 @@ TECH_DOCS += technical/protocol-common TECH_DOCS += technical/racy-git TECH_DOCS += technical/send-pack-pipeline TECH_DOCS += technical/shallow +TECH_DOCS += technical/signature-format TECH_DOCS += technical/trivial-merge SP_ARTICLES += $(TECH_DOCS) SP_ARTICLES += technical/api-index @@ -119,6 +120,7 @@ INSTALL_INFO = install-info DOCBOOK2X_TEXI = docbook2x-texi DBLATEX = dblatex ASCIIDOC_DBLATEX_DIR = /etc/asciidoc/dblatex +DBLATEX_COMMON = -p $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.xsl -s $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.sty ifndef PERL_PATH PERL_PATH = /usr/bin/perl endif @@ -146,7 +148,7 @@ else ASCIIDOC_EXTRA += -a git-asciidoc-no-roff endif endif -ifdef MAN_BOLD_LITERAL +ifndef NO_MAN_BOLD_LITERAL XMLTO_EXTRA += -m manpage-bold-literal.xsl endif ifdef DOCBOOK_SUPPRESS_SP @@ -172,6 +174,16 @@ ifdef GNU_ROFF XMLTO_EXTRA += -m manpage-quote-apos.xsl endif +ifdef USE_ASCIIDOCTOR +ASCIIDOC = asciidoctor +ASCIIDOC_CONF = +ASCIIDOC_HTML = xhtml5 +ASCIIDOC_DOCBOOK = docbook45 +ASCIIDOC_EXTRA += -I. -rasciidoctor-extensions +ASCIIDOC_EXTRA += -alitdd='&\#x2d;&\#x2d;' +DBLATEX_COMMON = +endif + SHELL_PATH ?= $(SHELL) # Shell quote; SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) @@ -204,6 +216,7 @@ ifndef V QUIET_DBLATEX = @echo ' ' DBLATEX $@; QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; QUIET_GEN = @echo ' ' GEN $@; + QUIET_LINT = @echo ' ' LINT $@; QUIET_STDERR = 2> /dev/null QUIET_SUBDIR0 = +@subdir= QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ @@ -335,7 +348,7 @@ manpage-base-url.xsl: manpage-base-url.xsl.in user-manual.xml: user-manual.txt user-manual.conf $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ - $(TXT_TO_XML) -d article -o $@+ $< && \ + $(TXT_TO_XML) -d book -o $@+ $< && \ mv $@+ $@ technical/api-index.txt: technical/api-index-skel.txt \ @@ -366,13 +379,14 @@ user-manual.texi: user-manual.xml user-manual.pdf: user-manual.xml $(QUIET_DBLATEX)$(RM) $@+ $@ && \ - $(DBLATEX) -o $@+ -p $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.xsl -s $(ASCIIDOC_DBLATEX_DIR)/asciidoc-dblatex.sty $< && \ + $(DBLATEX) -o $@+ $(DBLATEX_COMMON) $< && \ mv $@+ $@ -gitman.texi: $(MAN_XML) cat-texi.perl +gitman.texi: $(MAN_XML) cat-texi.perl texi.xsl $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ - ($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \ - --to-stdout $(xml) &&) true) > $@++ && \ + ($(foreach xml,$(sort $(MAN_XML)),xsltproc -o $(xml)+ texi.xsl $(xml) && \ + $(DOCBOOK2X_TEXI) --encoding=UTF-8 --to-stdout $(xml)+ && \ + rm $(xml)+ &&) true) > $@++ && \ $(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \ rm $@++ && \ mv $@+ $@ @@ -427,4 +441,7 @@ quick-install-html: require-htmlrepo print-man1: @for i in $(MAN1_TXT); do echo $$i; done +lint-docs:: + $(QUIET_LINT)$(PERL_PATH) lint-gitlink.perl + .PHONY: FORCE diff --git a/Documentation/RelNotes/2.10.0.txt b/Documentation/RelNotes/2.10.0.txt new file mode 100644 index 0000000..f4da28a --- /dev/null +++ b/Documentation/RelNotes/2.10.0.txt @@ -0,0 +1,675 @@ +Git 2.10 Release Notes +====================== + +Backward compatibility notes +---------------------------- + +Updates since v2.9 +------------------ + +UI, Workflows & Features + + * "git pull --rebase --verify-signature" learned to warn the user + that "--verify-signature" is a no-op when rebasing. + + * An upstream project can make a recommendation to shallowly clone + some submodules in the .gitmodules file it ships. + + * "git worktree add" learned that '-' can be used as a short-hand for + "@{-1}", the previous branch. + + * Update the funcname definition to support css files. + + * The completion script (in contrib/) learned to complete "git + status" options. + + * Messages that are generated by auto gc during "git push" on the + receiving end are now passed back to the sending end in such a way + that they are shown with "remote: " prefix to avoid confusing the + users. + + * "git add -i/-p" learned to honor diff.compactionHeuristic + experimental knob, so that the user can work on the same hunk split + as "git diff" output. + + * "upload-pack" allows a custom "git pack-objects" replacement when + responding to "fetch/clone" via the uploadpack.packObjectsHook. + (merge b738396 jk/upload-pack-hook later to maint). + + * Teach format-patch and mailsplit (hence "am") how a line that + happens to begin with "From " in the e-mail message is quoted with + ">", so that these lines can be restored to their original shape. + (merge d9925d1 ew/mboxrd-format-am later to maint). + + * "git repack" learned the "--keep-unreachable" option, which sends + loose unreachable objects to a pack instead of leaving them loose. + This helps heuristics based on the number of loose objects + (e.g. "gc --auto"). + (merge e26a8c4 jk/repack-keep-unreachable later to maint). + + * "log --graph --format=" learned that "%>|(N)" specifies the width + relative to the terminal's left edge, not relative to the area to + draw text that is to the right of the ancestry-graph section. It + also now accepts negative N that means the column limit is relative + to the right border. + + * A careless invocation of "git send-email directory/" after editing + 0001-change.patch with an editor often ends up sending both + 0001-change.patch and its backup file, 0001-change.patch~, causing + embarrassment and a minor confusion. Detect such an input and + offer to skip the backup files when sending the patches out. + (merge 531220b jc/send-email-skip-backup later to maint). + + * "git submodule update" that drives many "git clone" could + eventually hit flaky servers/network conditions on one of the + submodules; the command learned to retry the attempt. + + * The output coloring scheme learned two new attributes, italic and + strike, in addition to existing bold, reverse, etc. + + * "git log" learns log.showSignature configuration variable, and a + command line option "--no-show-signature" to countermand it. + (merge fce04c3 mj/log-show-signature-conf later to maint). + + * More markings of messages for i18n, with updates to various tests + to pass GETTEXT_POISON tests. + + * "git archive" learned to handle files that are larger than 8GB and + commits far in the future than expressible by the traditional US-TAR + format. + (merge 560b0e8 jk/big-and-future-archive-tar later to maint). + + + * A new configuration variable core.sshCommand has been added to + specify what value for GIT_SSH_COMMAND to use per repository. + + * "git worktree prune" protected worktrees that are marked as + "locked" by creating a file in a known location. "git worktree" + command learned a dedicated command pair to create and remove such + a file, so that the users do not have to do this with editor. + + * A handful of "git svn" updates. + + * "git push" learned to accept and pass extra options to the + receiving end so that hooks can read and react to them. + + * "git status" learned to suggest "merge --abort" during a conflicted + merge, just like it already suggests "rebase --abort" during a + conflicted rebase. + + * "git jump" script (in contrib/) has been updated a bit. + (merge a91e692 jk/git-jump later to maint). + + * "git push" and "git clone" learned to give better progress meters + to the end user who is waiting on the terminal. + + * An entry "git log --decorate" for the tip of the current branch is + shown as "HEAD -> name" (where "name" is the name of the branch); + the arrow is now painted in the same color as "HEAD", not in the + color for commits. + + * "git format-patch" learned format.from configuration variable to + specify the default settings for its "--from" option. + + * "git am -3" calls "git merge-recursive" when it needs to fall back + to a three-way merge; this call has been turned into an internal + subroutine call instead of spawning a separate subprocess. + + * The command line completion scripts (in contrib/) now knows about + "git branch --delete/--move [--remote]". + (merge 2703c22 vs/completion-branch-fully-spelled-d-m-r later to maint). + + * "git rev-parse --git-path hooks/<hook>" learned to take + core.hooksPath configuration variable (introduced during 2.9 cycle) + into account. + (merge 9445b49 ab/hooks later to maint). + + * "git log --show-signature" and other commands that display the + verification status of PGP signature now shows the longer key-id, + as 32-bit key-id is so last century. + + +Performance, Internal Implementation, Development Support etc. + + * "git fast-import" learned the same performance trick to avoid + creating too small a packfile as "git fetch" and "git push" have, + using *.unpackLimit configuration. + + * When "git daemon" is run without --[init-]timeout specified, a + connection from a client that silently goes offline can hang around + for a long time, wasting resources. The socket-level KEEPALIVE has + been enabled to allow the OS to notice such failed connections. + + * "git upload-pack" command has been updated to use the parse-options + API. + + * The "git apply" standalone program is being libified; the first + step to move many state variables into a structure that can be + explicitly (re)initialized to make the machinery callable more + than once has been merged. + + * HTTP transport gained an option to produce more detailed debugging + trace. + (merge 73e57aa ep/http-curl-trace later to maint). + + * Instead of taking advantage of the fact that a struct string_list + that is allocated with all NULs happens to be the INIT_NODUP kind, + the users of string_list structures are taught to initialize them + explicitly as such, to document their behaviour better. + (merge 2721ce2 jk/string-list-static-init later to maint). + + * HTTPd tests learned to show the server error log to help diagnosing + a failing tests. + (merge 44f243d nd/test-lib-httpd-show-error-log-in-verbose later to maint). + + * The ownership rule for the piece of memory that hold references to + be fetched in "git fetch" was screwy, which has been cleaned up. + + * "git bisect" makes an internal call to "git diff-tree" when + bisection finds the culprit, but this call did not initialize the + data structure to pass to the diff-tree API correctly. + + * Further preparatory clean-up for "worktree" feature continues. + (merge 0409e0b nd/worktree-cleanup-post-head-protection later to maint). + + * Formats of the various data (and how to validate them) where we use + GPG signature have been documented. + + * A new run-command API function pipe_command() is introduced to + sanely feed data to the standard input while capturing data from + the standard output and the standard error of an external process, + which is cumbersome to hand-roll correctly without deadlocking. + + * The codepath to sign data in a prepared buffer with GPG has been + updated to use this API to read from the status-fd to check for + errors (instead of relying on GPG's exit status). + (merge efee955 jk/gpg-interface-cleanup later to maint). + + * Allow t/perf framework to use the features from the most recent + version of Git even when testing an older installed version. + + * The commands in the "log/diff" family have had an FILE* pointer in the + data structure they pass around for a long time, but some codepaths + used to always write to the standard output. As a preparatory step + to make "git format-patch" available to the internal callers, these + codepaths have been updated to consistently write into that FILE* + instead. + + * Conversion from unsigned char sha1[20] to struct object_id + continues. + + * Improve the look of the way "git fetch" reports what happened to + each ref that was fetched. + + * The .c/.h sources are marked as such in our .gitattributes file so + that "git diff -W" and friends would work better. + + * Code clean-up to avoid using a variable string that compilers may + feel untrustable as printf-style format given to write_file() + helper function. + + * "git p4" used a location outside $GIT_DIR/refs/ to place its + temporary branches, which has been moved to refs/git-p4-tmp/. + + * Existing autoconf generated test for the need to link with pthread + library did not check all the functions from pthread libraries; + recent FreeBSD has some functions in libc but not others, and we + mistakenly thought linking with libc is enough when it is not. + + * When "git fsck" reports a broken link (e.g. a tree object contains + a blob that does not exist), both containing object and the object + that is referred to were reported with their 40-hex object names. + The command learned the "--name-objects" option to show the path to + the containing object from existing refs (e.g. "HEAD~24^2:file.txt"). + + * Allow http daemon tests in Travis CI tests. + + * Makefile assumed that -lrt is always available on platforms that + want to use clock_gettime() and CLOCK_MONOTONIC, which is not a + case for recent Mac OS X. The necessary symbols are often found in + libc on many modern systems and having -lrt on the command line, as + long as the library exists, had no effect, but when the platform + removes librt.a that is a different matter--having -lrt will break + the linkage. + + This change could be seen as a regression for those who do need to + specify -lrt, as they now specifically ask for NEEDS_LIBRT when + building. Hopefully they are in the minority these days. + + * Further preparatory work on the refs API before the pluggable + backend series can land. + + * Error handling in the codepaths that updates refs has been + improved. + + * The API to iterate over all the refs (i.e. for_each_ref(), etc.) + has been revamped. + + * The handling of the "text=auto" attribute has been corrected. + $ echo "* text=auto eol=crlf" >.gitattributes + used to have the same effect as + $ echo "* text eol=crlf" >.gitattributes + i.e. declaring all files are text (ignoring "auto"). The + combination has been fixed to be equivalent to doing + $ git config core.autocrlf true + + * Documentation has been updated to show better example usage + of the updated "text=auto" attribute. + + * A few tests that specifically target "git rebase -i" have been + added. + + * Dumb http transport on the client side has been optimized. + (merge ecba195 ew/http-walker later to maint). + + * Users of the parse_options_concat() API function need to allocate + extra slots in advance and fill them with OPT_END() when they want + to decide the set of supported options dynamically, which makes the + code error-prone and hard to read. This has been corrected by tweaking + the API to allocate and return a new copy of "struct option" array. + + * "git fetch" exchanges batched have/ack messages between the sender + and the receiver, initially doubling every time and then falling + back to enlarge the window size linearly. The "smart http" + transport, being an half-duplex protocol, outgrows the preset limit + too quickly and becomes inefficient when interacting with a large + repository. The internal mechanism learned to grow the window size + more aggressively when working with the "smart http" transport. + + * Tests for "git svn" have been taught to reuse the lib-httpd test + infrastructure when testing the subversion integration that + interacts with subversion repositories served over the http:// + protocol. + (merge a8a5d25 ew/git-svn-http-tests later to maint). + + * "git pack-objects" has a few options that tell it not to pack + objects found in certain packfiles, which require it to scan .idx + files of all available packs. The codepaths involved in these + operations have been optimized for a common case of not having any + non-local pack and/or any .kept pack. + + * The t3700 test about "add --chmod=-x" have been made a bit more + robust and generally cleaned up. + (merge 766cdc4 ib/t3700-add-chmod-x-updates later to maint). + + * The build procedure learned PAGER_ENV knob that lists what default + environment variable settings to export for popular pagers. This + mechanism is used to tweak the default settings to MORE on FreeBSD. + (merge 995bc22 ew/build-time-pager-tweaks later to maint). + + * The http-backend (the server-side component of smart-http + transport) used to trickle the HTTP header one at a time. Now + these write(2)s are batched. + (merge b36045c ew/http-backend-batch-headers later to maint). + + * When "git rebase" tries to compare set of changes on the updated + upstream and our own branch, it computes patch-id for all of these + changes and attempts to find matches. This has been optimized by + lazily computing the full patch-id (which is expensive) to be + compared only for changes that touch the same set of paths. + (merge ba67504 kw/patch-ids-optim later to maint). + + * A handful of tests that were broken under gettext-poison build have + been fixed. + + * The recent i18n patch we added during this cycle did a bit too much + refactoring of the messages to avoid word-legos; the repetition has + been reduced to help translators. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.9 +---------------- + +Unless otherwise noted, all the fixes since v2.8 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * The commands in `git log` family take %C(auto) in a custom format + string. This unconditionally turned the color on, ignoring + --no-color or with --color=auto when the output is not connected to + a tty; this was corrected to make the format truly behave as + "auto". + + * "git rev-list --count" whose walk-length is limited with "-n" + option did not work well with the counting optimized to look at the + bitmap index. + + * "git show -W" (extend hunks to cover the entire function, delimited + by lines that match the "funcname" pattern) used to show the entire + file when a change added an entire function at the end of the file, + which has been fixed. + + * The documentation set has been updated so that literal commands, + configuration variables and environment variables are consistently + typeset in fixed-width font and bold in manpages. + + * "git svn propset" subcommand that was added in 2.3 days is + documented now. + + * The documentation tries to consistently spell "GPG"; when + referring to the specific program name, "gpg" is used. + + * "git reflog" stopped upon seeing an entry that denotes a branch + creation event (aka "unborn"), which made it appear as if the + reflog was truncated. + + * The git-prompt scriptlet (in contrib/) was not friendly with those + who uses "set -u", which has been fixed. + + * compat/regex code did not cleanly compile. + + * A codepath that used alloca(3) to place an unbounded amount of data + on the stack has been updated to avoid doing so. + + * "git update-index --add --chmod=+x file" may be usable as an escape + hatch, but not a friendly thing to force for people who do need to + use it regularly. "git add --chmod=+x file" can be used instead. + + * Build improvements for gnome-keyring (in contrib/) + + * "git status" used to say "working directory" when it meant "working + tree". + + * Comments about misbehaving FreeBSD shells have been clarified with + the version number (9.x and before are broken, newer ones are OK). + + * "git cherry-pick A" worked on an unborn branch, but "git + cherry-pick A..B" didn't. + + * Fix an unintended regression in v2.9 that breaks "clone --depth" + that recurses down to submodules by forcing the submodules to also + be cloned shallowly, which many server instances that host upstream + of the submodules are not prepared for. + + * Fix unnecessarily waste in the idiomatic use of ': ${VAR=default}' + to set the default value, without enclosing it in double quotes. + + * Some platform-specific code had non-ANSI strict declarations of C + functions that do not take any parameters, which has been + corrected. + + * The internal code used to show local timezone offset is not + prepared to handle timestamps beyond year 2100, and gave a + bogus offset value to the caller. Use a more benign looking + +0000 instead and let "git log" going in such a case, instead + of aborting. + + * One among four invocations of readlink(1) in our test suite has + been rewritten so that the test can run on systems without the + command (others are in valgrind test framework and t9802). + + * t/perf needs /usr/bin/time with GNU extension; the invocation of it + is updated to "gtime" on Darwin. + + * A bug, which caused "git p4" while running under verbose mode to + report paths that are omitted due to branch prefix incorrectly, has + been fixed; the command said "Ignoring file outside of prefix" for + paths that are _inside_. + + * The top level documentation "git help git" still pointed at the + documentation set hosted at now-defunct google-code repository. + Update it to point to https://git.github.io/htmldocs/git.html + instead. + + * A helper function that takes the contents of a commit object and + finds its subject line did not ignore leading blank lines, as is + commonly done by other codepaths. Make it ignore leading blank + lines to match. + + * For a long time, we carried an in-code comment that said our + colored output would work only when we use fprintf/fputs on + Windows, which no longer is the case for the past few years. + + * "gc.autoPackLimit" when set to 1 should not trigger a repacking + when there is only one pack, but the code counted poorly and did + so. + + * Add a test to specify the desired behaviour that currently is not + available in "git rebase -Xsubtree=...". + + * More mark-up updates to typeset strings that are expected to + literally typed by the end user in fixed-width font. + + * "git commit --amend --allow-empty-message -S" for a commit without + any message body could have misidentified where the header of the + commit object ends. + + * "git rebase -i --autostash" did not restore the auto-stashed change + when the operation was aborted. + + * Git does not know what the contents in the index should be for a + path added with "git add -N" yet, so "git grep --cached" should not + show hits (or show lack of hits, with -L) in such a path, but that + logic does not apply to "git grep", i.e. searching in the working + tree files. But we did so by mistake, which has been corrected. + + * "git blame -M" missed a single line that was moved within the file. + + * Fix recently introduced codepaths that are involved in parallel + submodule operations, which gave up on reading too early, and + could have wasted CPU while attempting to write under a corner + case condition. + + * "git grep -i" has been taught to fold case in non-ascii locales + correctly. + + * A test that unconditionally used "mktemp" learned that the command + is not necessarily available everywhere. + + * There are certain house-keeping tasks that need to be performed at + the very beginning of any Git program, and programs that are not + built-in commands had to do them exactly the same way as "git" + potty does. It was easy to make mistakes in one-off standalone + programs (like test helpers). A common "main()" function that + calls cmd_main() of individual program has been introduced to + make it harder to make mistakes. + (merge de61ceb jk/common-main later to maint). + + * The test framework learned a new helper test_match_signal to + check an exit code from getting killed by an expected signal. + + * General code clean-up around a helper function to write a + single-liner to a file. + (merge 7eb6e10 jk/write-file later to maint). + + * One part of "git am" had an oddball helper function that called + stuff from outside "his" as opposed to calling what we have "ours", + which was not gender-neutral and also inconsistent with the rest of + the system where outside stuff is usuall called "theirs" in + contrast to "ours". + + * "git blame file" allowed the lineage of lines in the uncommitted, + unadded contents of "file" to be inspected, but it refused when + "file" did not appear in the current commit. When "file" was + created by renaming an existing file (but the change has not been + committed), this restriction was unnecessarily tight. + + * "git add -N dir/file && git write-tree" produced an incorrect tree + when there are other paths in the same directory that sorts after + "file". + + * "git fetch http://user:pass@host/repo..." scrubbed the userinfo + part, but "git push" didn't. + + * "git merge" with renormalization did not work well with + merge-recursive, due to "safer crlf" conversion kicking in when it + shouldn't. + (merge 1335d76 jc/renormalize-merge-kill-safer-crlf later to maint). + + * The use of strbuf in "git rm" to build filename to remove was a bit + suboptimal, which has been fixed. + + * An age old bug that caused "git diff --ignore-space-at-eol" + misbehave has been fixed. + + * "git notes merge" had a code to see if a path exists (and fails if + it does) and then open the path for writing (when it doesn't). + Replace it with open with O_EXCL. + + * "git pack-objects" and "git index-pack" mostly operate with off_t + when talking about the offset of objects in a packfile, but there + were a handful of places that used "unsigned long" to hold that + value, leading to an unintended truncation. + + * Recent update to "git daemon" tries to enable the socket-level + KEEPALIVE, but when it is spawned via inetd, the standard input + file descriptor may not necessarily be connected to a socket. + Suppress an ENOTSOCK error from setsockopt(). + + * Recent FreeBSD stopped making perl available at /usr/bin/perl; + switch the default the built-in path to /usr/local/bin/perl on not + too ancient FreeBSD releases. + + * "git commit --help" said "--no-verify" is only about skipping the + pre-commit hook, and failed to say that it also skipped the + commit-msg hook. + + * "git merge" in Git v2.9 was taught to forbid merging an unrelated + lines of history by default, but that is exactly the kind of thing + the "--rejoin" mode of "git subtree" (in contrib/) wants to do. + "git subtree" has been taught to use the "--allow-unrelated-histories" + option to override the default. + + * The build procedure for "git persistent-https" helper (in contrib/) + has been updated so that it can be built with more recent versions + of Go. + + * There is an optimization used in "git diff $treeA $treeB" to borrow + an already checked-out copy in the working tree when it is known to + be the same as the blob being compared, expecting that open/mmap of + such a file is faster than reading it from the object store, which + involves inflating and applying delta. This however kicked in even + when the checked-out copy needs to go through the convert-to-git + conversion (including the clean filter), which defeats the whole + point of the optimization. The optimization has been disabled when + the conversion is necessary. + + * "git -c grep.patternType=extended log --basic-regexp" misbehaved + because the internal API to access the grep machinery was not + designed well. + + * Windows port was failing some tests in t4130, due to the lack of + inum in the returned values by its lstat(2) emulation. + + * The reflog output format is documented better, and a new format + --date=unix to report the seconds-since-epoch (without timezone) + has been added. + (merge 442f6fd jk/reflog-date later to maint). + + * "git difftool <paths>..." started in a subdirectory failed to + interpret the paths relative to that directory, which has been + fixed. + + * The characters in the label shown for tags/refs for commits in + "gitweb" output are now properly escaped for proper HTML output. + + * FreeBSD can lie when asked mtime of a directory, which made the + untracked cache code to fall back to a slow-path, which in turn + caused tests in t7063 to fail because it wanted to verify the + behaviour of the fast-path. + + * Squelch compiler warnings for nedmalloc (in compat/) library. + + * A small memory leak in the command line parsing of "git blame" + has been plugged. + + * The API documentation for hashmap was unclear if hashmap_entry + can be safely discarded without any other consideration. State + that it is safe to do so. + + * Not-so-recent rewrite of "git am" that started making internal + calls into the commit machinery had an unintended regression, in + that no matter how many seconds it took to apply many patches, the + resulting committer timestamp for the resulting commits were all + the same. + + * "git push --force-with-lease" already had enough logic to allow + ensuring that such a push results in creation of a ref (i.e. the + receiving end did not have another push from sideways that would be + discarded by our force-pushing), but didn't expose this possibility + to the users. It does so now. + (merge 9eed4f3 jk/push-force-with-lease-creation later to maint). + + * The mechanism to limit the pack window memory size, when packing is + done using multiple threads (which is the default), is per-thread, + but this was not documented clearly. + (merge 954176c ms/document-pack-window-memory-is-per-thread later to maint). + + * "import-tars" fast-import script (in contrib/) used to ignore a + hardlink target and replaced it with an empty file, which has been + corrected to record the same blob as the other file the hardlink is + shared with. + (merge 04e0869 js/import-tars-hardlinks later to maint). + + * "git mv dir non-existing-dir/" did not work in some environments + the same way as existing mainstream platforms. The code now moves + "dir" to "non-existing-dir", without relying on rename("A", "B/") + that strips the trailing slash of '/'. + (merge 189d035 js/mv-dir-to-new-directory later to maint). + + * The "t/" hierarchy is prone to get an unusual pathname; "make test" + has been taught to make sure they do not contain paths that cannot + be checked out on Windows (and the mechanism can be reusable to + catch pathnames that are not portable to other platforms as need + arises). + (merge c2cafd3 js/test-lint-pathname later to maint). + + * When "git merge-recursive" works on history with many criss-cross + merges in "verbose" mode, the names the command assigns to the + virtual merge bases could have overwritten each other by unintended + reuse of the same piece of memory. + (merge 5447a76 rs/pull-signed-tag later to maint). + + * "git checkout --detach <branch>" used to give the same advice + message as that is issued when "git checkout <tag>" (or anything + that is not a branch name) is given, but asking with "--detach" is + an explicit enough sign that the user knows what is going on. The + advice message has been squelched in this case. + (merge 779b88a sb/checkout-explit-detach-no-advice later to maint). + + * "git difftool" by default ignores the error exit from the backend + commands it spawns, because often they signal that they found + differences by exiting with a non-zero status code just like "diff" + does; the exit status codes 126 and above however are special in + that they are used to signal that the command is not executable, + does not exist, or killed by a signal. "git difftool" has been + taught to notice these exit status codes. + (merge 45a4f5d jk/difftool-command-not-found later to maint). + + * On Windows, help.browser configuration variable used to be ignored, + which has been corrected. + (merge 6db5967 js/no-html-bypass-on-windows later to maint). + + * The "git -c var[=val] cmd" facility to append a configuration + variable definition at the end of the search order was described in + git(1) manual page, but not in git-config(1), which was more likely + place for people to look for when they ask "can I make a one-shot + override, and if so how?" + (merge ae1f709 dg/document-git-c-in-git-config-doc later to maint). + + * The tempfile (hence its user lockfile) API lets the caller to open + a file descriptor to a temporary file, write into it and then + finalize it by first closing the filehandle and then either + removing or renaming the temporary file. When the process spawns a + subprocess after obtaining the file descriptor, and if the + subprocess has not exited when the attempt to remove or rename is + made, the last step fails on Windows, because the subprocess has + the file descriptor still open. Open tempfile with O_CLOEXEC flag + to avoid this (on Windows, this is mapped to O_NOINHERIT). + (merge 05d1ed6 bw/mingw-avoid-inheriting-fd-to-lockfile later to maint). + + * Correct an age-old calco (is that a typo-like word for calc) + in the documentation. + (merge 7841c48 ls/packet-line-protocol-doc-fix later to maint). + + * Other minor clean-ups and documentation updates + (merge 02a8cfa rs/merge-add-strategies-simplification later to maint). + (merge af4941d rs/merge-recursive-string-list-init later to maint). + (merge 1eb47f1 rs/use-strbuf-add-unique-abbrev later to maint). + (merge ddd0bfa jk/tighten-alloc later to maint). + (merge ecf30b2 rs/mailinfo-lib later to maint). + (merge 0eb75ce sg/reflog-past-root later to maint). + (merge 4369523 hv/doc-commit-reference-style later to maint). diff --git a/Documentation/RelNotes/2.10.1.txt b/Documentation/RelNotes/2.10.1.txt new file mode 100644 index 0000000..70462f7 --- /dev/null +++ b/Documentation/RelNotes/2.10.1.txt @@ -0,0 +1,131 @@ +Git v2.10.1 Release Notes +========================= + +Fixes since v2.10 +----------------- + + * Clarify various ways to specify the "revision ranges" in the + documentation. + + * "diff-highlight" script (in contrib/) learned to work better with + "git log -p --graph" output. + + * The test framework left the number of tests and success/failure + count in the t/test-results directory, keyed by the name of the + test script plus the process ID. The latter however turned out not + to serve any useful purpose. The process ID part of the filename + has been removed. + + * Having a submodule whose ".git" repository is somehow corrupt + caused a few commands that recurse into submodules loop forever. + + * "git symbolic-ref -d HEAD" happily removes the symbolic ref, but + the resulting repository becomes an invalid one. Teach the command + to forbid removal of HEAD. + + * A test spawned a short-lived background process, which sometimes + prevented the test directory from getting removed at the end of the + script on some platforms. + + * Update a few tests that used to use GIT_CURL_VERBOSE to use the + newer GIT_TRACE_CURL. + + * Update Japanese translation for "git-gui". + + * "git fetch http::/site/path" did not die correctly and segfaulted + instead. + + * "git commit-tree" stopped reading commit.gpgsign configuration + variable that was meant for Porcelain "git commit" in Git 2.9; we + forgot to update "git gui" to look at the configuration to match + this change. + + * "git log --cherry-pick" used to include merge commits as candidates + to be matched up with other commits, resulting a lot of wasted time. + The patch-id generation logic has been updated to ignore merges to + avoid the wastage. + + * The http transport (with curl-multi option, which is the default + these days) failed to remove curl-easy handle from a curlm session, + which led to unnecessary API failures. + + * "git diff -W" output needs to extend the context backward to + include the header line of the current function and also forward to + include the body of the entire current function up to the header + line of the next one. This process may have to merge to adjacent + hunks, but the code forgot to do so in some cases. + + * Performance tests done via "t/perf" did not use the same set of + build configuration if the user relied on autoconf generated + configuration. + + * "git format-patch --base=..." feature that was recently added + showed the base commit information after "-- " e-mail signature + line, which turned out to be inconvenient. The base information + has been moved above the signature line. + + * Even when "git pull --rebase=preserve" (and the underlying "git + rebase --preserve") can complete without creating any new commit + (i.e. fast-forwards), it still insisted on having a usable ident + information (read: user.email is set correctly), which was less + than nice. As the underlying commands used inside "git rebase" + would fail with a more meaningful error message and advice text + when the bogus ident matters, this extra check was removed. + + * "git gc --aggressive" used to limit the delta-chain length to 250, + which is way too deep for gaining additional space savings and is + detrimental for runtime performance. The limit has been reduced to + 50. + + * Documentation for individual configuration variables to control use + of color (like `color.grep`) said that their default value is + 'false', instead of saying their default is taken from `color.ui`. + When we updated the default value for color.ui from 'false' to + 'auto' quite a while ago, all of them broke. This has been + corrected. + + * A shell script example in check-ref-format documentation has been + fixed. + + * "git checkout <word>" does not follow the usual disambiguation + rules when the <word> can be both a rev and a path, to allow + checking out a branch 'foo' in a project that happens to have a + file 'foo' in the working tree without having to disambiguate. + This was poorly documented and the check was incorrect when the + command was run from a subdirectory. + + * Some codepaths in "git diff" used regexec(3) on a buffer that was + mmap(2)ed, which may not have a terminating NUL, leading to a read + beyond the end of the mapped region. This was fixed by introducing + a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND + extension. + + * The procedure to build Git on Mac OS X for Travis CI hardcoded the + internal directory structure we assumed HomeBrew uses, which was a + no-no. The procedure has been updated to ask HomeBrew things we + need to know to fix this. + + * When "git rebase -i" is given a broken instruction, it told the + user to fix it with "--edit-todo", but didn't say what the step + after that was (i.e. "--continue"). + + * "git add --chmod=+x" added recently lacked documentation, which has + been corrected. + + * "git add --chmod=+x <pathspec>" added recently only toggled the + executable bit for paths that are either new or modified. This has + been corrected to flip the executable bit for all paths that match + the given pathspec. + + * "git pack-objects --include-tag" was taught that when we know that + we are sending an object C, we want a tag B that directly points at + C but also a tag A that points at the tag B. We used to miss the + intermediate tag B in some cases. + + * Documentation around tools to import from CVS was fairly outdated. + + * In the codepath that comes up with the hostname to be used in an + e-mail when the user didn't tell us, we looked at ai_canonname + field in struct addrinfo without making sure it is not NULL first. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.10.2.txt b/Documentation/RelNotes/2.10.2.txt new file mode 100644 index 0000000..c4d4397 --- /dev/null +++ b/Documentation/RelNotes/2.10.2.txt @@ -0,0 +1,111 @@ +Git v2.10.2 Release Notes +========================= + +Fixes since v2.10.1 +------------------- + + * The code that parses the format parameter of for-each-ref command + has seen a micro-optimization. + + * The "graph" API used in "git log --graph" miscounted the number of + output columns consumed so far when drawing a padding line, which + has been fixed; this did not affect any existing code as nobody + tried to write anything after the padding on such a line, though. + + * Almost everybody uses DEFAULT_ABBREV to refer to the default + setting for the abbreviation, but "git blame" peeked into + underlying variable bypassing the macro for no good reason. + + * Doc update to clarify what "log -3 --reverse" does. + + * An author name, that spelled a backslash-quoted double quote in the + human readable part "My \"double quoted\" name", was not unquoted + correctly while applying a patch from a piece of e-mail. + + * The original command line syntax for "git merge", which was "git + merge <msg> HEAD <parent>...", has been deprecated for quite some + time, and "git gui" was the last in-tree user of the syntax. This + is finally fixed, so that we can move forward with the deprecation. + + * Codepaths that read from an on-disk loose object were too loose in + validating what they are reading is a proper object file and + sometimes read past the data they read from the disk, which has + been corrected. H/t to Gustavo Grieco for reporting. + + * "git worktree", even though it used the default_abbrev setting that + ought to be affected by core.abbrev configuration variable, ignored + the variable setting. The command has been taught to read the + default set of configuration variables to correct this. + + * A low-level function verify_packfile() was meant to show errors + that were detected without dying itself, but under some conditions + it didn't and died instead, which has been fixed. + + * When "git fetch" tries to find where the history of the repository + it runs in has diverged from what the other side has, it has a + mechanism to avoid digging too deep into irrelevant side branches. + This however did not work well over the "smart-http" transport due + to a design bug, which has been fixed. + + * When we started cURL to talk to imap server when a new enough + version of cURL library is available, we forgot to explicitly add + imap(s):// before the destination. To some folks, that didn't work + and the library tried to make HTTP(s) requests instead. + + * The ./configure script generated from configure.ac was taught how + to detect support of SSL by libcurl better. + + * http.emptyauth configuration is a way to allow an empty username to + pass when attempting to authenticate using mechanisms like + Kerberos. We took an unspecified (NULL) username and sent ":" + (i.e. no username, no password) to CURLOPT_USERPWD, but did not do + the same when the username is explicitly set to an empty string. + + * "git clone" of a local repository can be done at the filesystem + level, but the codepath did not check errors while copying and + adjusting the file that lists alternate object stores. + + * Documentation for "git commit" was updated to clarify that "commit + -p <paths>" adds to the current contents of the index to come up + with what to commit. + + * A stray symbolic link in $GIT_DIR/refs/ directory could make name + resolution loop forever, which has been corrected. + + * The "submodule.<name>.path" stored in .gitmodules is never copied + to .git/config and such a key in .git/config has no meaning, but + the documentation described it and submodule.<name>.url next to + each other as if both belong to .git/config. This has been fixed. + + * Recent git allows submodule.<name>.branch to use a special token + "." instead of the branch name; the documentation has been updated + to describe it. + + * In a worktree connected to a repository elsewhere, created via "git + worktree", "git checkout" attempts to protect users from confusion + by refusing to check out a branch that is already checked out in + another worktree. However, this also prevented checking out a + branch, which is designated as the primary branch of a bare + reopsitory, in a worktree that is connected to the bare + repository. The check has been corrected to allow it. + + * "git rebase" immediately after "git clone" failed to find the fork + point from the upstream. + + * When fetching from a remote that has many tags that are irrelevant + to branches we are following, we used to waste way too many cycles + when checking if the object pointed at by a tag (that we are not + going to fetch!) exists in our repository too carefully. + + * The Travis CI configuration we ship ran the tests with --verbose + option but this risks non-TAP output that happens to be "ok" to be + misinterpreted as TAP signalling a test that passed. This resulted + in unnecessary failure. This has been corrected by introducing a + new mode to run our tests in the test harness to send the verbose + output separately to the log file. + + * Some AsciiDoc formatter mishandles a displayed illustration with + tabs in it. Adjust a few of them in merge-base documentation to + work around them. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.10.3.txt b/Documentation/RelNotes/2.10.3.txt new file mode 100644 index 0000000..277a2a1 --- /dev/null +++ b/Documentation/RelNotes/2.10.3.txt @@ -0,0 +1,48 @@ +Git v2.10.3 Release Notes +========================= + +Fixes since v2.10.2 +------------------- + + * Extract a small helper out of the function that reads the authors + script file "git am" internally uses. + This by itself is not useful until a second caller appears in the + future for "rebase -i" helper. + + * The command-line completion script (in contrib/) learned to + complete "git cmd ^mas<HT>" to complete the negative end of + reference to "git cmd ^master". + + * "git send-email" attempts to pick up valid e-mails from the + trailers, but people in real world write non-addresses there, like + "Cc: Stable <add@re.ss> # 4.8+", which broke the output depending + on the availability and vintage of Mail::Address perl module. + + * The code that we have used for the past 10+ years to cycle + 4-element ring buffers turns out to be not quite portable in + theoretical world. + + * "git daemon" used fixed-length buffers to turn URL to the + repository the client asked for into the server side directory + path, using snprintf() to avoid overflowing these buffers, but + allowed possibly truncated paths to the directory. This has been + tightened to reject such a request that causes overlong path to be + required to serve. + + * Recent update to git-sh-setup (a library of shell functions that + are used by our in-tree scripted Porcelain commands) included + another shell library git-sh-i18n without specifying where it is, + relying on the $PATH. This has been fixed to be more explicit by + prefixing $(git --exec-path) output in front. + + * Fix for a racy false-positive test failure. + + * Portability update and workaround for builds on recent Mac OS X. + + * Update to the test framework made in 2.9 timeframe broke running + the tests under valgrind, which has been fixed. + + * Improve the rule to convert "unsigned char [20]" into "struct + object_id *" in contrib/coccinelle/ + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.11.0.txt b/Documentation/RelNotes/2.11.0.txt new file mode 100644 index 0000000..b7b7dd3 --- /dev/null +++ b/Documentation/RelNotes/2.11.0.txt @@ -0,0 +1,593 @@ +Git 2.11 Release Notes +====================== + +Backward compatibility notes. + + * An empty string used as a pathspec element has always meant + 'everything matches', but it is too easy to write a script that + finds a path to remove in $path and run 'git rm "$paht"' by + mistake (when the user meant to give "$path"), which ends up + removing everything. This release starts warning about the + use of an empty string that is used for 'everything matches' and + asks users to use a more explicit '.' for that instead. + + The hope is that existing users will not mind this change, and + eventually the warning can be turned into a hard error, upgrading + the deprecation into removal of this (mis)feature. + + * The historical argument order "git merge <msg> HEAD <commit>..." + has been deprecated for quite some time, and will be removed in the + next release (not this one). + + * The default abbreviation length, which has historically been 7, now + scales as the repository grows, using the approximate number of + objects in the repository and a bit of math around the birthday + paradox. The logic suggests to use 12 hexdigits for the Linux + kernel, and 9 to 10 for Git itself. + + +Updates since v2.10 +------------------- + +UI, Workflows & Features + + * Comes with new version of git-gui, now at its 0.21.0 tag. + + * "git format-patch --cover-letter HEAD^" to format a single patch + with a separate cover letter now numbers the output as [PATCH 0/1] + and [PATCH 1/1] by default. + + * An incoming "git push" that attempts to push too many bytes can now + be rejected by setting a new configuration variable at the receiving + end. + + * "git nosuchcommand --help" said "No manual entry for gitnosuchcommand", + which was not intuitive, given that "git nosuchcommand" said "git: + 'nosuchcommand' is not a git command". + + * "git clone --recurse-submodules --reference $path $URL" is a way to + reduce network transfer cost by borrowing objects in an existing + $path repository when cloning the superproject from $URL; it + learned to also peek into $path for presence of corresponding + repositories of submodules and borrow objects from there when able. + + * The "git diff --submodule={short,log}" mechanism has been enhanced + to allow "--submodule=diff" to show the patch between the submodule + commits bound to the superproject. + + * Even though "git hash-objects", which is a tool to take an + on-filesystem data stream and put it into the Git object store, + can perform "outside-world-to-Git" conversions (e.g. + end-of-line conversions and application of the clean-filter), and + it has had this feature on by default from very early days, its reverse + operation "git cat-file", which takes an object from the Git object + store and externalizes it for consumption by the outside world, + lacked an equivalent mechanism to run the "Git-to-outside-world" + conversion. The command learned the "--filters" option to do so. + + * Output from "git diff" can be made easier to read by intelligently selecting + which lines are common and which lines are added/deleted + when the lines before and after the changed section + are the same. A command line option (--indent-heuristic) and a + configuration variable (diff.indentHeuristic) are added to help with the + experiment to find good heuristics. + + * In some projects, it is common to use "[RFC PATCH]" as the subject + prefix for a patch meant for discussion rather than application. A + new format-patch option "--rfc" is a short-hand for "--subject-prefix=RFC PATCH" + to help the participants of such projects. + + * "git add --chmod={+,-}x <pathspec>" only changed the + executable bit for paths that are either new or modified. This has + been corrected to change the executable bit for all paths that match + the given pathspec. + + * When "git format-patch --stdout" output is placed as an in-body + header and it uses RFC2822 header folding, "git am" fails to + put the header line back into a single logical line. The + underlying "git mailinfo" was taught to handle this properly. + + * "gitweb" can spawn "highlight" to show blob contents with + (programming) language-specific syntax highlighting, but only + when the language is known. "highlight" can however be told + to guess the language itself by giving it "--force" option, which + has been enabled. + + * "git gui" l10n to Portuguese. + + * When given an abbreviated object name that is not (or more + realistically, "no longer") unique, we gave a fatal error + "ambiguous argument". This error is now accompanied by a hint that + lists the objects beginning with the given prefix. During the + course of development of this new feature, numerous minor bugs were + uncovered and corrected, the most notable one of which is that we + gave "short SHA1 xxxx is ambiguous." twice without good reason. + + * "git log rev^..rev" is an often-used revision range specification + to show what was done on a side branch merged at rev. This has + gained a short-hand "rev^-1". In general "rev^-$n" is the same as + "^rev^$n rev", i.e. what has happened on other branches while the + history leading to nth parent was looking the other way. + + * In recent versions of cURL, GSSAPI credential delegation is + disabled by default due to CVE-2011-2192; introduce a http.delegation + configuration variable to selectively allow enabling this. + (merge 26a7b23429 ps/http-gssapi-cred-delegation later to maint). + + * "git mergetool" learned to honor "-O<orderfile>" to control the + order of paths to present to the end user. + + * "git diff/log --ws-error-highlight=<kind>" lacked the corresponding + configuration variable (diff.wsErrorHighlight) to set it by default. + + * "git ls-files" learned the "--recurse-submodules" option + to get a listing of tracked files across submodules (i.e. this + only works with the "--cached" option, not for listing untracked or + ignored files). This would be a useful tool to sit on the upstream + side of a pipe that is read with xargs to work on all working tree + files from the top-level superproject. + + * A new credential helper that talks via "libsecret" with + implementations of XDG Secret Service API has been added to + contrib/credential/. + + * The GPG verification status shown by the "%G?" pretty format specifier + was not rich enough to differentiate a signature made by an expired + key, a signature made by a revoked key, etc. New output letters + have been assigned to express them. + + * In addition to purely abbreviated commit object names, "gitweb" + learned to turn "git describe" output (e.g. v2.9.3-599-g2376d31787) + into clickable links in its output. + + * "git commit" created an empty commit when invoked with an index + consisting solely of intend-to-add paths (added with "git add -N"). + It now requires the "--allow-empty" option to create such a commit. + The same logic prevented "git status" from showing such paths as "new files" in the + "Changes not staged for commit" section. + + * The smudge/clean filter API spawns an external process + to filter the contents of each path that has a filter defined. A + new type of "process" filter API has been added to allow the first + request to run the filter for a path to spawn a single process, and + all filtering is served by this single process for multiple + paths, reducing the process creation overhead. + + * The user always has to say "stash@{$N}" when naming a single + element in the default location of the stash, i.e. reflogs in + refs/stash. The "git stash" command learned to accept "git stash + apply 4" as a short-hand for "git stash apply stash@{4}". + + +Performance, Internal Implementation, Development Support etc. + + * The delta-base-cache mechanism has been a key to the performance in + a repository with a tightly packed packfile, but it did not scale + well even with a larger value of core.deltaBaseCacheLimit. + + * Enhance "git status --porcelain" output by collecting more data on + the state of the index and the working tree files, which may + further be used to teach git-prompt (in contrib/) to make fewer + calls to git. + + * Extract a small helper out of the function that reads the authors + script file "git am" internally uses. + (merge a77598e jc/am-read-author-file later to maint). + + * Lift calls to exit(2) and die() higher in the callchain in + sequencer.c files so that more helper functions in it can be used + by callers that want to handle error conditions themselves. + + * "git am" has been taught to make an internal call to "git apply"'s + innards without spawning the latter as a separate process. + + * The ref-store abstraction was introduced to the refs API so that we + can plug in different backends to store references. + + * The "unsigned char sha1[20]" to "struct object_id" conversion + continues. Notable changes in this round includes that ce->sha1, + i.e. the object name recorded in the cache_entry, turns into an + object_id. + + * JGit can show a fake ref "capabilities^{}" to "git fetch" when it + does not advertise any refs, but "git fetch" was not prepared to + see such an advertisement. When the other side disconnects without + giving any ref advertisement, we used to say "there may not be a + repository at that URL", but we may have seen other advertisements + like "shallow" and ".have" in which case we definitely know that a + repository is there. The code to detect this case has also been + updated. + + * Some codepaths in "git pack-objects" were not ready to use an + existing pack bitmap; now they are and as a result they have + become faster. + + * The codepath in "git fsck" to detect malformed tree objects has + been updated not to die but keep going after detecting them. + + * We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of + the time third parameter is redundant. A new QSORT() macro lets us + omit it. + + * "git pack-objects" in a repository with many packfiles used to + spend a lot of time looking for/at objects in them; the accesses to + the packfiles are now optimized by checking the most-recently-used + packfile first. + (merge c9af708b1a jk/pack-objects-optim-mru later to maint). + + * Codepaths involved in interacting alternate object stores have + been cleaned up. + + * In order for the receiving end of "git push" to inspect the + received history and decide to reject the push, the objects sent + from the sending end need to be made available to the hook and + the mechanism for the connectivity check, and this was done + traditionally by storing the objects in the receiving repository + and letting "git gc" expire them. Instead, store the newly + received objects in a temporary area, and make them available by + reusing the alternate object store mechanism to them only while we + decide if we accept the check, and once we decide, either migrate + them to the repository or purge them immediately. + + * The require_clean_work_tree() helper was recreated in C when "git + pull" was rewritten from shell; the helper is now made available to + other callers in preparation for upcoming "rebase -i" work. + + * "git upload-pack" had its code cleaned-up and performance improved + by reducing use of timestamp-ordered commit-list, which was + replaced with a priority queue. + + * "git diff --no-index" codepath has been updated not to try to peek + into a .git/ directory that happens to be under the current + directory, when we know we are operating outside any repository. + + * Update of the sequencer codebase to make it reusable to reimplement + "rebase -i" continues. + + * Git generally does not explicitly close file descriptors that were + open in the parent process when spawning a child process, but most + of the time the child does not want to access them. As Windows does + not allow removing or renaming a file that has a file descriptor + open, a slow-to-exit child can even break the parent process by + holding onto them. Use O_CLOEXEC flag to open files in various + codepaths. + + * Update "interpret-trailers" machinery and teach it that people in + the real world write all sorts of cruft in the "trailer" that was + originally designed to have the neat-o "Mail-Header: like thing" + and nothing else. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.10 +----------------- + +Unless otherwise noted, all the fixes since v2.9 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * Clarify various ways to specify the "revision ranges" in the + documentation. + + * "diff-highlight" script (in contrib/) learned to work better with + "git log -p --graph" output. + + * The test framework left the number of tests and success/failure + count in the t/test-results directory, keyed by the name of the + test script plus the process ID. The latter however turned out not + to serve any useful purpose. The process ID part of the filename + has been removed. + + * Having a submodule whose ".git" repository is somehow corrupt + caused a few commands that recurse into submodules to loop forever. + + * "git symbolic-ref -d HEAD" happily removes the symbolic ref, but + the resulting repository becomes an invalid one. Teach the command + to forbid removal of HEAD. + + * A test spawned a short-lived background process, which sometimes + prevented the test directory from getting removed at the end of the + script on some platforms. + + * Update a few tests that used to use GIT_CURL_VERBOSE to use the + newer GIT_TRACE_CURL. + + * "git pack-objects --include-tag" was taught that when we know that + we are sending an object C, we want a tag B that directly points at + C but also a tag A that points at the tag B. We used to miss the + intermediate tag B in some cases. + + * Update Japanese translation for "git-gui". + + * "git fetch http::/site/path" did not die correctly and segfaulted + instead. + + * "git commit-tree" stopped reading commit.gpgsign configuration + variable that was meant for Porcelain "git commit" in Git 2.9; we + forgot to update "git gui" to look at the configuration to match + this change. + + * "git add --chmod={+,-}x" added recently lacked documentation, which has + been corrected. + + * "git log --cherry-pick" used to include merge commits as candidates + to be matched up with other commits, resulting a lot of wasted time. + The patch-id generation logic has been updated to ignore merges and + avoid the wastage. + + * The http transport (with curl-multi option, which is the default + these days) failed to remove curl-easy handle from a curlm session, + which led to unnecessary API failures. + + * There were numerous corner cases in which the configuration files + are read and used or not read at all depending on the directory a + Git command was run, leading to inconsistent behaviour. The code + to set-up repository access at the beginning of a Git process has + been updated to fix them. + (merge 4d0efa1 jk/setup-sequence-update later to maint). + + * "git diff -W" output needs to extend the context backward to + include the header line of the current function and also forward to + include the body of the entire current function up to the header + line of the next one. This process may have to merge two adjacent + hunks, but the code forgot to do so in some cases. + + * Performance tests done via "t/perf" did not use the right + build configuration if the user relied on autoconf generated + configuration. + + * "git format-patch --base=..." feature that was recently added + showed the base commit information after the "-- " e-mail signature + line, which turned out to be inconvenient. The base information + has been moved above the signature line. + + * More i18n. + + * Even when "git pull --rebase=preserve" (and the underlying "git + rebase --preserve") can complete without creating any new commits + (i.e. fast-forwards), it still insisted on having usable ident + information (read: user.email is set correctly), which was less + than nice. As the underlying commands used inside "git rebase" + would fail with a more meaningful error message and advice text + when the bogus ident matters, this extra check was removed. + + * "git gc --aggressive" used to limit the delta-chain length to 250, + which is way too deep for gaining additional space savings and is + detrimental for runtime performance. The limit has been reduced to + 50. + + * Documentation for individual configuration variables to control use + of color (like `color.grep`) said that their default value is + 'false', instead of saying their default is taken from `color.ui`. + When we updated the default value for color.ui from 'false' to + 'auto' quite a while ago, all of them broke. This has been + corrected. + + * The pretty-format specifier "%C(auto)" used by the "log" family of + commands to enable coloring of the output is taught to also issue a + color-reset sequence to the output. + + * A shell script example in check-ref-format documentation has been + fixed. + + * "git checkout <word>" does not follow the usual disambiguation + rules when the <word> can be both a rev and a path, to allow + checking out a branch 'foo' in a project that happens to have a + file 'foo' in the working tree without having to disambiguate. + This was poorly documented and the check was incorrect when the + command was run from a subdirectory. + + * Some codepaths in "git diff" used regexec(3) on a buffer that was + mmap(2)ed, which may not have a terminating NUL, leading to a read + beyond the end of the mapped region. This was fixed by introducing + a regexec_buf() helper that takes a <ptr,len> pair with REG_STARTEND + extension. + + * The procedure to build Git on Mac OS X for Travis CI hardcoded the + internal directory structure we assumed HomeBrew uses, which was a + no-no. The procedure has been updated to ask HomeBrew things we + need to know to fix this. + + * When "git rebase -i" is given a broken instruction, it told the + user to fix it with "--edit-todo", but didn't say what the step + after that was (i.e. "--continue"). + + * Documentation around tools to import from CVS was fairly outdated. + + * "git clone --recurse-submodules" lost the progress eye-candy in + a recent update, which has been corrected. + + * A low-level function verify_packfile() was meant to show errors + that were detected without dying itself, but under some conditions + it didn't and died instead, which has been fixed. + + * When "git fetch" tries to find where the history of the repository + it runs in has diverged from what the other side has, it has a + mechanism to avoid digging too deep into irrelevant side branches. + This however did not work well over the "smart-http" transport due + to a design bug, which has been fixed. + + * In the codepath that comes up with the hostname to be used in an + e-mail when the user didn't tell us, we looked at the ai_canonname + field in struct addrinfo without making sure it is not NULL first. + + * "git worktree", even though it used the default_abbrev setting that + ought to be affected by the core.abbrev configuration variable, ignored + the variable setting. The command has been taught to read the + default set of configuration variables to correct this. + + * "git init" tried to record core.worktree in the repository's + 'config' file when the GIT_WORK_TREE environment variable was set and + it was different from where GIT_DIR appears as ".git" at its top, + but the logic was faulty when .git is a "gitdir:" file that points + at the real place, causing trouble in working trees that are + managed by "git worktree". This has been corrected. + + * Codepaths that read from an on-disk loose object were too loose in + validating that they are reading a proper object file and + sometimes read past the data they read from the disk, which has + been corrected. H/t to Gustavo Grieco for reporting. + + * The original command line syntax for "git merge", which was "git + merge <msg> HEAD <parent>...", has been deprecated for quite some + time, and "git gui" was the last in-tree user of the syntax. This + is finally fixed, so that we can move forward with the deprecation. + + * An author name that has a backslash-quoted double quote in the + human readable part ("My \"double quoted\" name"), was not unquoted + correctly while applying a patch from a piece of e-mail. + + * Doc update to clarify what "log -3 --reverse" does. + + * Almost everybody uses DEFAULT_ABBREV to refer to the default + setting for the abbreviation, but "git blame" peeked into + underlying variable bypassing the macro for no good reason. + + * The "graph" API used in "git log --graph" miscounted the number of + output columns consumed so far when drawing a padding line, which + has been fixed; this did not affect any existing code as nobody + tried to write anything after the padding on such a line, though. + + * The code that parses the format parameter of the for-each-ref command + has seen a micro-optimization. + + * When we started to use cURL to talk to an imap server, we forgot to explicitly add + imap(s):// before the destination. To some folks, that didn't work + and the library tried to make HTTP(s) requests instead. + + * The ./configure script generated from configure.ac was taught how + to detect support of SSL by libcurl better. + + * The command-line completion script (in contrib/) learned to + complete "git cmd ^mas<HT>" to complete the negative end of + reference to "git cmd ^master". + (merge 49416ad22a cp/completion-negative-refs later to maint). + + * The existing "git fetch --depth=<n>" option was hard to use + correctly when making the history of an existing shallow clone + deeper. A new option, "--deepen=<n>", has been added to make this + easier to use. "git clone" also learned "--shallow-since=<date>" + and "--shallow-exclude=<tag>" options to make it easier to specify + "I am interested only in the recent N months worth of history" and + "Give me only the history since that version". + (merge cccf74e2da nd/shallow-deepen later to maint). + + * "git blame --reverse OLD path" is now DWIMmed to show how lines + in path in an old revision OLD have survived up to the current + commit. + (merge e1d09701a4 jc/blame-reverse later to maint). + + * The http.emptyauth configuration variable is a way to allow an empty username to + pass when attempting to authenticate using mechanisms like + Kerberos. We took an unspecified (NULL) username and sent ":" + (i.e. no username, no password) to CURLOPT_USERPWD, but did not do + the same when the username is explicitly set to an empty string. + + * "git clone" of a local repository can be done at the filesystem + level, but the codepath did not check errors while copying and + adjusting the file that lists alternate object stores. + + * Documentation for "git commit" was updated to clarify that "commit + -p <paths>" adds to the current contents of the index to come up + with what to commit. + + * A stray symbolic link in the $GIT_DIR/refs/ directory could make name + resolution loop forever, which has been corrected. + + * The "submodule.<name>.path" stored in .gitmodules is never copied + to .git/config and such a key in .git/config has no meaning, but + the documentation described it next to submodule.<name>.url + as if both belong to .git/config. This has been fixed. + + * In a worktree created via "git + worktree", "git checkout" attempts to protect users from confusion + by refusing to check out a branch that is already checked out in + another worktree. However, this also prevented checking out a + branch which is designated as the primary branch of a bare + repository, in a worktree that is connected to the bare + repository. The check has been corrected to allow it. + + * "git rebase" immediately after "git clone" failed to find the fork + point from the upstream. + + * When fetching from a remote that has many tags that are irrelevant + to branches we are following, we used to waste way too many cycles + checking if the object pointed at by a tag (that we are not + going to fetch!) exists in our repository too carefully. + + * Protect our code from over-eager compilers. + + * Recent git allows submodule.<name>.branch to use a special token + "." instead of the branch name; the documentation has been updated + to describe it. + + * "git send-email" attempts to pick up valid e-mails from the + trailers, but people in the real world write non-addresses there, like + "Cc: Stable <add@re.ss> # 4.8+", which broke the output depending + on the availability and vintage of the Mail::Address perl module. + (merge dcfafc5214 mm/send-email-cc-cruft-after-address later to maint). + + * The Travis CI configuration we ship ran the tests with the --verbose + option but this risks non-TAP output that happens to be "ok" to be + misinterpreted as TAP signalling a test that passed. This resulted + in unnecessary failures. This has been corrected by introducing a + new mode to run our tests in the test harness to send the verbose + output separately to the log file. + + * Some AsciiDoc formatters mishandle a displayed illustration with + tabs in it. Adjust a few of them in merge-base documentation to + work around them. + + * Fixed a minor regression in "git submodule" that was introduced + when more helper functions were reimplemented in C. + (merge 77b63ac31e sb/submodule-ignore-trailing-slash later to maint). + + * The code that we have used for the past 10+ years to cycle + 4-element ring buffers turns out to be not quite portable in + theoretical world. + (merge bb84735c80 rs/ring-buffer-wraparound later to maint). + + * "git daemon" used fixed-length buffers to turn URLs to the + repository the client asked for into the server side directory + paths, using snprintf() to avoid overflowing these buffers, but + allowed possibly truncated paths to the directory. This has been + tightened to reject such a request that causes an overlong path to be + served. + (merge 6bdb0083be jk/daemon-path-ok-check-truncation later to maint). + + * Recent update to git-sh-setup (a library of shell functions that + are used by our in-tree scripted Porcelain commands) included + another shell library git-sh-i18n without specifying where it is, + relying on the $PATH. This has been fixed to be more explicit by + prefixing with $(git --exec-path) output. + (merge 1073094f30 ak/sh-setup-dot-source-i18n-fix later to maint). + + * Fix for a racy false-positive test failure. + (merge fdf4f6c79b as/merge-attr-sleep later to maint). + + * Portability update and workaround for builds on recent Mac OS X. + (merge a296bc0132 ls/macos-update later to maint). + + * Using a %(HEAD) placeholder in "for-each-ref --format=" option + caused the command to segfault when on an unborn branch. + (merge 84679d470d jc/for-each-ref-head-segfault-fix later to maint). + + * "git rebase -i" did not work well with the core.commentchar + configuration variable for two reasons, both of which have been + fixed. + (merge 882cd23777 js/rebase-i-commentchar-fix later to maint). + + * Other minor doc, test and build updates and code cleanups. + (merge 5c238e29a8 jk/common-main later to maint). + (merge 5a5749e45b ak/pre-receive-hook-template-modefix later to maint). + (merge 6d834ac8f1 jk/rebase-config-insn-fmt-docfix later to maint). + (merge de9f7fa3b0 rs/commit-pptr-simplify later to maint). + (merge 4259d693fc sc/fmt-merge-msg-doc-markup-fix later to maint). + (merge 28fab7b23d nd/test-helpers later to maint). + (merge c2bb0c1d1e rs/cocci later to maint). + (merge 3285b7badb ps/common-info-doc later to maint). + (merge 2b090822e8 nd/worktree-lock later to maint). + (merge 4bd488ea7c jk/create-branch-remove-unused-param later to maint). + (merge 974e0044d6 tk/diffcore-delta-remove-unused later to maint). diff --git a/Documentation/RelNotes/2.11.1.txt b/Documentation/RelNotes/2.11.1.txt new file mode 100644 index 0000000..9cd14c8 --- /dev/null +++ b/Documentation/RelNotes/2.11.1.txt @@ -0,0 +1,168 @@ +Git v2.11.1 Release Notes +========================= + +Fixes since v2.11 +----------------- + + * The default Travis-CI configuration specifies newer P4 and GitLFS. + + * The character width table has been updated to match Unicode 9.0 + + * Update the isatty() emulation for Windows by updating the previous + hack that depended on internals of (older) MSVC runtime. + + * "git rev-parse --symbolic" failed with a more recent notation like + "HEAD^-1" and "HEAD^!". + + * An empty directory in a working tree that can simply be nuked used + to interfere while merging or cherry-picking a change to create a + submodule directory there, which has been fixed.. + + * The code in "git push" to compute if any commit being pushed in the + superproject binds a commit in a submodule that hasn't been pushed + out was overly inefficient, making it unusable even for a small + project that does not have any submodule but have a reasonable + number of refs. + + * "git push --dry-run --recurse-submodule=on-demand" wasn't + "--dry-run" in the submodules. + + * The output from "git worktree list" was made in readdir() order, + and was unstable. + + * mergetool.<tool>.trustExitCode configuration variable did not apply + to built-in tools, but now it does. + + * "git p4" LFS support was broken when LFS stores an empty blob. + + * Fix a corner case in merge-recursive regression that crept in + during 2.10 development cycle. + + * Update the error messages from the dumb-http client when it fails + to obtain loose objects; we used to give sensible error message + only upon 404 but we now forbid unexpected redirects that needs to + be reported with something sensible. + + * When diff.renames configuration is on (and with Git 2.9 and later, + it is enabled by default, which made it worse), "git stash" + misbehaved if a file is removed and another file with a very + similar content is added. + + * "git diff --no-index" did not take "--no-abbrev" option. + + * "git difftool --dir-diff" had a minor regression when started from + a subdirectory, which has been fixed. + + * "git commit --allow-empty --only" (no pathspec) with dirty index + ought to be an acceptable way to create a new commit that does not + change any paths, but it was forbidden, perhaps because nobody + needed it so far. + + * A pathname that begins with "//" or "\\" on Windows is special but + path normalization logic was unaware of it. + + * "git pull --rebase", when there is no new commits on our side since + we forked from the upstream, should be able to fast-forward without + invoking "git rebase", but it didn't. + + * The way to specify hotkeys to "xxdiff" that is used by "git + mergetool" has been modernized to match recent versions of xxdiff. + + * Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back + to where cherry-pick started while picking multiple changes, when + the cherry-pick stopped to ask for help from the user, and the user + did "git reset --hard" to a different commit in order to re-attempt + the operation. + + * Code cleanup in shallow boundary computation. + + * A recent update to receive-pack to make it easier to drop garbage + objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot + have a pathname with a colon in it (no surprise!), and this in turn + made it impossible to push into a repository at such a path. This + has been fixed by introducing a quoting mechanism used when + appending such a path to the colon-separated list. + + * The function usage_msg_opt() has been updated to say "fatal:" + before the custom message programs give, when they want to die + with a message about wrong command line options followed by the + standard usage string. + + * "git index-pack --stdin" needs an access to an existing repository, + but "git index-pack file.pack" to generate an .idx file that + corresponds to a packfile does not. + + * Fix for NDEBUG builds. + + * A lazy "git push" without refspec did not internally use a fully + specified refspec to perform 'current', 'simple', or 'upstream' + push, causing unnecessary "ambiguous ref" errors. + + * "git p4" misbehaved when swapping a directory and a symbolic link. + + * Even though an fix was attempted in Git 2.9.3 days, but running + "git difftool --dir-diff" from a subdirectory never worked. This + has been fixed. + + * "git p4" that tracks multile p4 paths imported a single changelist + that touches files in these multiple paths as one commit, followed + by many empty commits. This has been fixed. + + * A potential but unlikely buffer overflow in Windows port has been + fixed. + + * When the http server gives an incomplete response to a smart-http + rpc call, it could lead to client waiting for a full response that + will never come. Teach the client side to notice this condition + and abort the transfer. + + * Some platforms no longer understand "latin-1" that is still seen in + the wild in e-mail headers; replace them with "iso-8859-1" that is + more widely known when conversion fails from/to it. + + * Update the procedure to generate "tags" for developer support. + + * Update the definition of the MacOSX test environment used by + TravisCI. + + * A few git-svn updates. + + * Compression setting for producing packfiles were spread across + three codepaths, one of which did not honor any configuration. + Unify these so that all of them honor core.compression and + pack.compression variables the same way. + + * "git fast-import" sometimes mishandled while rebalancing notes + tree, which has been fixed. + + * Recent update to the default abbreviation length that auto-scales + lacked documentation update, which has been corrected. + + * Leakage of lockfiles in the config subsystem has been fixed. + + * It is natural that "git gc --auto" may not attempt to pack + everything into a single pack, and there is no point in warning + when the user has configured the system to use the pack bitmap, + leading to disabling further "gc". + + * "git archive" did not read the standard configuration files, and + failed to notice a file that is marked as binary via the userdiff + driver configuration. + + * "git blame --porcelain" misidentified the "previous" <commit, path> + pair (aka "source") when contents came from two or more files. + + * "git rebase -i" with a recent update started showing an incorrect + count when squashing more than 10 commits. + + * "git <cmd> @{push}" on a detached HEAD used to segfault; it has + been corrected to error out with a message. + + * Tighten a test to avoid mistaking an extended ERE regexp engine as + a PRE regexp engine. + + * Typing ^C to pager, which usually does not kill it, killed Git and + took the pager down as a collateral damage in certain process-tree + structure. This has been fixed. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.12.0.txt b/Documentation/RelNotes/2.12.0.txt new file mode 100644 index 0000000..2915480 --- /dev/null +++ b/Documentation/RelNotes/2.12.0.txt @@ -0,0 +1,500 @@ +Git 2.12 Release Notes +====================== + +Backward compatibility notes. + + * Use of an empty string that is used for 'everything matches' is + still warned and Git asks users to use a more explicit '.' for that + instead. The hope is that existing users will not mind this + change, and eventually the warning can be turned into a hard error, + upgrading the deprecation into removal of this (mis)feature. That + is not scheduled to happen in the upcoming release (yet). + + * The historical argument order "git merge <msg> HEAD <commit>..." + has been deprecated for quite some time, and will be removed in a + future release. + + * An ancient script "git relink" has been removed. + + +Updates since v2.11 +------------------- + +UI, Workflows & Features + + * Various updates to "git p4". + + * "git p4" didn't interact with the internal of .git directory + correctly in the modern "git-worktree"-enabled world. + + * "git branch --list" and friends learned "--ignore-case" option to + optionally sort branches and tags case insensitively. + + * In addition to %(subject), %(body), "log --pretty=format:..." + learned a new placeholder %(trailers). + + * "git rebase" learned "--quit" option, which allows a user to + remove the metadata left by an earlier "git rebase" that was + manually aborted without using "git rebase --abort". + + * "git clone --reference $there --recurse-submodules $super" has been + taught to guess repositories usable as references for submodules of + $super that are embedded in $there while making a clone of the + superproject borrow objects from $there; extend the mechanism to + also allow submodules of these submodules to borrow repositories + embedded in these clones of the submodules embedded in the clone of + the superproject. + + * Porcelain scripts written in Perl are getting internationalized. + + * "git merge --continue" has been added as a synonym to "git commit" + to conclude a merge that has stopped due to conflicts. + + * Finer-grained control of what protocols are allowed for transports + during clone/fetch/push have been enabled via a new configuration + mechanism. + + * "git shortlog" learned "--committer" option to group commits by + committer, instead of author. + + * GitLFS integration with "git p4" has been updated. + + * The isatty() emulation for Windows has been updated to eradicate + the previous hack that depended on internals of (older) MSVC + runtime. + + * Some platforms no longer understand "latin-1" that is still seen in + the wild in e-mail headers; replace them with "iso-8859-1" that is + more widely known when conversion fails from/to it. + + * "git grep" has been taught to optionally recurse into submodules. + + * "git rm" used to refuse to remove a submodule when it has its own + git repository embedded in its working tree. It learned to move + the repository away to $GIT_DIR/modules/ of the superproject + instead, and allow the submodule to be deleted (as long as there + will be no loss of local modifications, that is). + + * A recent updates to "git p4" was not usable for older p4 but it + could be made to work with minimum changes. Do so. + + * "git diff" learned diff.interHunkContext configuration variable + that gives the default value for its --inter-hunk-context option. + + * The prereleaseSuffix feature of version comparison that is used in + "git tag -l" did not correctly when two or more prereleases for the + same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2 + are there and the code needs to compare 2.0-beta1 and 2.0-beta2). + + * "git submodule push" learned "--recurse-submodules=only option to + push submodules out without pushing the top-level superproject. + + * "git tag" and "git verify-tag" learned to put GPG verification + status in their "--format=<placeholders>" output format. + + * An ancient repository conversion tool left in contrib/ has been + removed. + + * "git show-ref HEAD" used with "--verify" because the user is not + interested in seeing refs/remotes/origin/HEAD, and used with + "--head" because the user does not want HEAD to be filtered out, + i.e. "git show-ref --head --verify HEAD", did not work as expected. + + * "git submodule add" used to be confused and refused to add a + locally created repository; users can now use "--force" option + to add them. + (merge 619acfc78c sb/submodule-add-force later to maint). + + * Some people feel the default set of colors used by "git log --graph" + rather limiting. A mechanism to customize the set of colors has + been introduced. + + * "git read-tree" and its underlying unpack_trees() machinery learned + to report problematic paths prefixed with the --super-prefix option. + + * When a submodule "A", which has another submodule "B" nested within + it, is "absorbed" into the top-level superproject, the inner + submodule "B" used to be left in a strange state. The logic to + adjust the .git pointers in these submodules has been corrected. + + * The user can specify a custom update method that is run when + "submodule update" updates an already checked out submodule. This + was ignored when checking the submodule out for the first time and + we instead always just checked out the commit that is bound to the + path in the superproject's index. + + * The command line completion (in contrib/) learned that + "git diff --submodule=" can take "diff" as a recently added option. + + * The "core.logAllRefUpdates" that used to be boolean has been + enhanced to take 'always' as well, to record ref updates to refs + other than the ones that are expected to be updated (i.e. branches, + remote-tracking branches and notes). + + * Comes with more command line completion (in contrib/) for recently + introduced options. + + +Performance, Internal Implementation, Development Support etc. + + * Commands that operate on a log message and add lines to the trailer + blocks, such as "format-patch -s", "cherry-pick (-x|-s)", and + "commit -s", have been taught to use the logic of and share the + code with "git interpret-trailer". + + * The default Travis-CI configuration specifies newer P4 and GitLFS. + + * The "fast hash" that had disastrous performance issues in some + corner cases has been retired from the internal diff. + + * The character width table has been updated to match Unicode 9.0 + + * Update the procedure to generate "tags" for developer support. + + * The codeflow of setting NOATIME and CLOEXEC on file descriptors Git + opens has been simplified. + + * "git diff" and its family had two experimental heuristics to shift + the contents of a hunk to make the patch easier to read. One of + them turns out to be better than the other, so leave only the + "--indent-heuristic" option and remove the other one. + + * A new submodule helper "git submodule embedgitdirs" to make it + easier to move embedded .git/ directory for submodules in a + superproject to .git/modules/ (and point the latter with the former + that is turned into a "gitdir:" file) has been added. + + * "git push \\server\share\dir" has recently regressed and then + fixed. A test has retroactively been added for this breakage. + + * Build updates for Cygwin. + + * The implementation of "real_path()" was to go there with chdir(2) + and call getcwd(3), but this obviously wouldn't be usable in a + threaded environment. Rewrite it to manually resolve relative + paths including symbolic links in path components. + + * Adjust documentation to help AsciiDoctor render better while not + breaking the rendering done by AsciiDoc. + + * The sequencer machinery has been further enhanced so that a later + set of patches can start using it to reimplement "rebase -i". + + * Update the definition of the MacOSX test environment used by + TravisCI. + + * Rewrite a scripted porcelain "git difftool" in C. + + * "make -C t failed" will now run only the tests that failed in the + previous run. This is usable only when prove is not use, and gives + a useless error message when run after "make clean", but otherwise + is serviceable. + + * "uchar [40]" to "struct object_id" conversion continues. + + +Also contains various documentation updates and code clean-ups. + +Fixes since v2.10 +----------------- + +Unless otherwise noted, all the fixes since v2.9 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * We often decide if a session is interactive by checking if the + standard I/O streams are connected to a TTY, but isatty() that + comes with Windows incorrectly returned true if it is used on NUL + (i.e. an equivalent to /dev/null). This has been fixed. + + * "git svn" did not work well with path components that are "0", and + some configuration variable it uses were not documented. + + * "git rev-parse --symbolic" failed with a more recent notation like + "HEAD^-1" and "HEAD^!". + + * An empty directory in a working tree that can simply be nuked used + to interfere while merging or cherry-picking a change to create a + submodule directory there, which has been fixed.. + + * The code in "git push" to compute if any commit being pushed in the + superproject binds a commit in a submodule that hasn't been pushed + out was overly inefficient, making it unusable even for a small + project that does not have any submodule but have a reasonable + number of refs. + + * "git push --dry-run --recurse-submodule=on-demand" wasn't + "--dry-run" in the submodules. + + * The output from "git worktree list" was made in readdir() order, + and was unstable. + + * mergetool.<tool>.trustExitCode configuration variable did not apply + to built-in tools, but now it does. + + * "git p4" LFS support was broken when LFS stores an empty blob. + + * A corner case in merge-recursive regression that crept in + during 2.10 development cycle has been fixed. + + * Transport with dumb http can be fooled into following foreign URLs + that the end user does not intend to, especially with the server + side redirects and http-alternates mechanism, which can lead to + security issues. Tighten the redirection and make it more obvious + to the end user when it happens. + + * Update the error messages from the dumb-http client when it fails + to obtain loose objects; we used to give sensible error message + only upon 404 but we now forbid unexpected redirects that needs to + be reported with something sensible. + + * When diff.renames configuration is on (and with Git 2.9 and later, + it is enabled by default, which made it worse), "git stash" + misbehaved if a file is removed and another file with a very + similar content is added. + + * "git diff --no-index" did not take "--no-abbrev" option. + + * "git difftool --dir-diff" had a minor regression when started from + a subdirectory, which has been fixed. + + * "git commit --allow-empty --only" (no pathspec) with dirty index + ought to be an acceptable way to create a new commit that does not + change any paths, but it was forbidden, perhaps because nobody + needed it so far. + + * Git 2.11 had a minor regression in "merge --ff-only" that competed + with another process that simultanously attempted to update the + index. We used to explain what went wrong with an error message, + but the new code silently failed. The error message has been + resurrected. + + * A pathname that begins with "//" or "\\" on Windows is special but + path normalization logic was unaware of it. + + * "git pull --rebase", when there is no new commits on our side since + we forked from the upstream, should be able to fast-forward without + invoking "git rebase", but it didn't. + + * The way to specify hotkeys to "xxdiff" that is used by "git + mergetool" has been modernized to match recent versions of xxdiff. + + * Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back + to where cherry-pick started while picking multiple changes, when + the cherry-pick stopped to ask for help from the user, and the user + did "git reset --hard" to a different commit in order to re-attempt + the operation. + + * Code cleanup in shallow boundary computation. + + * A recent update to receive-pack to make it easier to drop garbage + objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot + have a pathname with a colon in it (no surprise!), and this in turn + made it impossible to push into a repository at such a path. This + has been fixed by introducing a quoting mechanism used when + appending such a path to the colon-separated list. + + * The function usage_msg_opt() has been updated to say "fatal:" + before the custom message programs give, when they want to die + with a message about wrong command line options followed by the + standard usage string. + + * "git index-pack --stdin" needs an access to an existing repository, + but "git index-pack file.pack" to generate an .idx file that + corresponds to a packfile does not. + + * Fix for NDEBUG builds. + + * A lazy "git push" without refspec did not internally use a fully + specified refspec to perform 'current', 'simple', or 'upstream' + push, causing unnecessary "ambiguous ref" errors. + + * "git p4" misbehaved when swapping a directory and a symbolic link. + + * Even though an fix was attempted in Git 2.9.3 days, but running + "git difftool --dir-diff" from a subdirectory never worked. This + has been fixed. + + * "git p4" that tracks multile p4 paths imported a single changelist + that touches files in these multiple paths as one commit, followed + by many empty commits. This has been fixed. + + * A potential but unlikely buffer overflow in Windows port has been + fixed. + + * When the http server gives an incomplete response to a smart-http + rpc call, it could lead to client waiting for a full response that + will never come. Teach the client side to notice this condition + and abort the transfer. + + * Compression setting for producing packfiles were spread across + three codepaths, one of which did not honor any configuration. + Unify these so that all of them honor core.compression and + pack.compression variables the same way. + + * "git fast-import" sometimes mishandled while rebalancing notes + tree, which has been fixed. + + * Recent update to the default abbreviation length that auto-scales + lacked documentation update, which has been corrected. + + * Leakage of lockfiles in the config subsystem has been fixed. + + * It is natural that "git gc --auto" may not attempt to pack + everything into a single pack, and there is no point in warning + when the user has configured the system to use the pack bitmap, + leading to disabling further "gc". + + * "git archive" did not read the standard configuration files, and + failed to notice a file that is marked as binary via the userdiff + driver configuration. + + * "git blame --porcelain" misidentified the "previous" <commit, path> + pair (aka "source") when contents came from two or more files. + + * "git rebase -i" with a recent update started showing an incorrect + count when squashing more than 10 commits. + + * "git <cmd> @{push}" on a detached HEAD used to segfault; it has + been corrected to error out with a message. + + * Running "git add a/b" when "a" is a submodule correctly errored + out, but without a meaningful error message. + (merge 2d81c48fa7 sb/pathspec-errors later to maint). + + * Typing ^C to pager, which usually does not kill it, killed Git and + took the pager down as a collateral damage in certain process-tree + structure. This has been fixed. + + * "git mergetool" without any pathspec on the command line that is + run from a subdirectory became no-op in Git v2.11 by mistake, which + has been fixed. + + * Retire long unused/unmaintained gitview from the contrib/ area. + (merge 3120925c25 sb/remove-gitview later to maint). + + * Tighten a test to avoid mistaking an extended ERE regexp engine as + a PRE regexp engine. + + * An error message with an ASCII control character like '\r' in it + can alter the message to hide its early part, which is problematic + when a remote side gives such an error message that the local side + will relay with a "remote: " prefix. + (merge f290089879 jk/vreport-sanitize later to maint). + + * "git fsck" inspects loose objects more carefully now. + (merge cce044df7f jk/loose-object-fsck later to maint). + + * A crashing bug introduced in v2.11 timeframe has been found (it is + triggerable only in fast-import) and fixed. + (merge abd5a00268 jk/clear-delta-base-cache-fix later to maint). + + * With an anticipatory tweak for remotes defined in ~/.gitconfig + (e.g. "remote.origin.prune" set to true, even though there may or + may not actually be "origin" remote defined in a particular Git + repository), "git remote rename" and other commands misinterpreted + and behaved as if such a non-existing remote actually existed. + (merge e459b073fb js/remote-rename-with-half-configured-remote later to maint). + + * A few codepaths had to rely on a global variable when sorting + elements of an array because sort(3) API does not allow extra data + to be passed to the comparison function. Use qsort_s() when + natively available, and a fallback implementation of it when not, + to eliminate the need, which is a prerequisite for making the + codepath reentrant. + + * "git fsck --connectivity-check" was not working at all. + (merge a2b22854bd jk/fsck-connectivity-check-fix later to maint). + + * After starting "git rebase -i", which first opens the user's editor + to edit the series of patches to apply, but before saving the + contents of that file, "git status" failed to show the current + state (i.e. you are in an interactive rebase session, but you have + applied no steps yet) correctly. + (merge df9ded4984 js/status-pre-rebase-i later to maint). + + * Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run + our tests but /usr/local/bin/unzip is usable. + (merge d98b2c5fce js/unzip-in-usr-bin-workaround later to maint). + + * "git p4" did not work well with multiple git-p4.mapUser entries on + Windows. + (merge c3c2b05776 gv/mingw-p4-mapuser later to maint). + + * "git help" enumerates executable files in $PATH; the implementation + of "is this file executable?" on Windows has been optimized. + (merge c755015f79 hv/mingw-help-is-executable later to maint). + + * Test tweaks for those who have default ACL in their git source tree + that interfere with the umask test. + (merge d549d21307 mm/reset-facl-before-umask-test later to maint). + + * Names of the various hook scripts must be spelled exactly, but on + Windows, an .exe binary must be named with .exe suffix; notice + $GIT_DIR/hooks/<hookname>.exe as a valid <hookname> hook. + (merge 235be51fbe js/mingw-hooks-with-exe-suffix later to maint). + + * Asciidoctor, an alternative reimplementation of AsciiDoc, still + needs some changes to work with documents meant to be formatted + with AsciiDoc. "make USE_ASCIIDOCTOR=YesPlease" to use it out of + the box to document our pages is getting closer to reality. + + * Correct command line completion (in contrib/) on "git svn" + (merge 2cbad17642 ew/complete-svn-authorship-options later to maint). + + * Incorrect usage help message for "git worktree prune" has been fixed. + (merge 2488dcab22 ps/worktree-prune-help-fix later to maint). + + * Adjust a perf test to new world order where commands that do + require a repository are really strict about having a repository. + (merge c86000c1a7 rs/p5302-create-repositories-before-tests later to maint). + + * "git log --graph" did not work well with "--name-only", even though + other forms of "diff" output were handled correctly. + (merge f5022b5fed jk/log-graph-name-only later to maint). + + * The push-options given via the "--push-options" option were not + passed through to external remote helpers such as "smart HTTP" that + are invoked via the transport helper. + + * The documentation explained what "git stash" does to the working + tree (after stashing away the local changes) in terms of "reset + --hard", which was exposing an unnecessary implementation detail. + (merge 20a7e06172 tg/stash-doc-cleanup later to maint). + + * When "git p4" imports changelist that removes paths, it failed to + convert pathnames when the p4 used encoding different from the one + used on the Git side. This has been corrected. + (merge a8b05162e8 ls/p4-path-encoding later to maint). + + * A new coccinelle rule that catches a check of !pointer before the + pointer is free(3)d, which most likely is a bug. + (merge ec6cd14c7a rs/cocci-check-free-only-null later to maint). + + * "ls-files" run with pathspec has been micro-optimized to avoid + having to memmove(3) unnecessary bytes. + (merge 96f6d3f61a rs/ls-files-partial-optim later to maint). + + * A hotfix for a topic already in 'master'. + (merge a4d92d579f js/mingw-isatty later to maint). + + * Other minor doc, test and build updates and code cleanups. + (merge f2627d9b19 sb/submodule-config-cleanup later to maint). + (merge 384f1a167b sb/unpack-trees-cleanup later to maint). + (merge 874444b704 rh/diff-orderfile-doc later to maint). + (merge eafd5d9483 cw/doc-sign-off later to maint). + (merge 0aaad415bc rs/absolute-pathdup later to maint). + (merge 4432dd6b5b rs/receive-pack-cleanup later to maint). + (merge 540a398e9c sg/mailmap-self later to maint). + (merge 209df269a6 nd/rev-list-all-includes-HEAD-doc later to maint). + (merge 941b9c5270 sb/doc-unify-bottom later to maint). + (merge 2aaf37b62c jk/doc-remote-helpers-markup-fix later to maint). + (merge e91461b332 jk/doc-submodule-markup-fix later to maint). + (merge 8ab9740d9f dp/submodule-doc-markup-fix later to maint). + (merge 0838cbc22f jk/tempfile-ferror-fclose-confusion later to maint). + (merge 115a40add6 dr/doc-check-ref-format-normalize later to maint). + (merge 133f0a299d gp/document-dotfiles-in-templates-are-not-copied later to maint). + (merge 2b35a9f4c7 bc/blame-doc-fix later to maint). + (merge 7e82388024 ps/doc-gc-aggressive-depth-update later to maint). + (merge 9993a7c5f1 bc/worktree-doc-fix-detached later to maint). + (merge e519eccdf4 rt/align-add-i-help-text later to maint). diff --git a/Documentation/RelNotes/2.12.1.txt b/Documentation/RelNotes/2.12.1.txt new file mode 100644 index 0000000..a74f7db --- /dev/null +++ b/Documentation/RelNotes/2.12.1.txt @@ -0,0 +1,41 @@ +Git v2.12.1 Release Notes +========================= + +Fixes since v2.12 +----------------- + + * Reduce authentication round-trip over HTTP when the server supports + just a single authentication method. This also improves the + behaviour when Git is misconfigured to enable http.emptyAuth + against a server that does not authenticate without a username + (i.e. not using Kerberos etc., which makes http.emptyAuth + pointless). + + * Windows port wants to use OpenSSL's implementation of SHA-1 + routines, so let them. + + * Add 32-bit Linux variant to the set of platforms to be tested with + Travis CI. + + * When a redirected http transport gets an error during the + redirected request, we ignored the error we got from the server, + and ended up giving a not-so-useful error message. + + * The patch subcommand of "git add -i" was meant to have paths + selection prompt just like other subcommand, unlike "git add -p" + directly jumps to hunk selection. Recently, this was broken and + "add -i" lost the paths selection dialog, but it now has been + fixed. + + * Git v2.12 was shipped with an embarrassing breakage where various + operations that verify paths given from the user stopped dying when + seeing an issue, and instead later triggering segfault. + + * The code to parse "git log -L..." command line was buggy when there + are many ranges specified with -L; overrun of the allocated buffer + has been fixed. + + * The command-line parsing of "git log -L" copied internal data + structures using incorrect size on ILP32 systems. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.12.2.txt b/Documentation/RelNotes/2.12.2.txt new file mode 100644 index 0000000..4419397 --- /dev/null +++ b/Documentation/RelNotes/2.12.2.txt @@ -0,0 +1,83 @@ +Git v2.12.2 Release Notes +========================= + +Fixes since v2.12.1 +------------------- + + * "git status --porcelain" is supposed to give a stable output, but a + few strings were left as translatable by mistake. + + * "Dumb http" transport used to misparse a nonsense http-alternates + response, which has been fixed. + + * "git diff --quiet" relies on the size field in diff_filespec to be + correctly populated, but diff_populate_filespec() helper function + made an incorrect short-cut when asked only to populate the size + field for paths that need to go through convert_to_git() (e.g. CRLF + conversion). + + * There is no need for Python only to give a few messages to the + standard error stream, but we somehow did. + + * A leak in a codepath to read from a packed object in (rare) cases + has been plugged. + + * "git upload-pack", which is a counter-part of "git fetch", did not + report a request for a ref that was not advertised as invalid. + This is generally not a problem (because "git fetch" will stop + before making such a request), but is the right thing to do. + + * A "gc.log" file left by a backgrounded "gc --auto" disables further + automatic gc; it has been taught to run at least once a day (by + default) by ignoring a stale "gc.log" file that is too old. + + * "git remote rm X", when a branch has remote X configured as the + value of its branch.*.remote, tried to remove branch.*.remote and + branch.*.merge and failed if either is unset. + + * A caller of tempfile API that uses stdio interface to write to + files may ignore errors while writing, which is detected when + tempfile is closed (with a call to ferror()). By that time, the + original errno that may have told us what went wrong is likely to + be long gone and was overwritten by an irrelevant value. + close_tempfile() now resets errno to EIO to make errno at least + predictable. + + * "git show-branch" expected there were only very short branch names + in the repository and used a fixed-length buffer to hold them + without checking for overflow. + + * The code that parses header fields in the commit object has been + updated for (micro)performance and code hygiene. + + * A test that creates a confusing branch whose name is HEAD has been + corrected not to do so. + + * "Cc:" on the trailer part does not have to conform to RFC strictly, + unlike in the e-mail header. "git send-email" has been updated to + ignore anything after '>' when picking addresses, to allow non-address + cruft like " # stable 4.4" after the address. + + * "git push" had a handful of codepaths that could lead to a deadlock + when unexpected error happened, which has been fixed. + + * Code to read submodule.<name>.ignore config did not state the + variable name correctly when giving an error message diagnosing + misconfiguration. + + * "git ls-remote" and "git archive --remote" are designed to work + without being in a directory under Git's control. However, recent + updates revealed that we randomly look into a directory called + .git/ without actually doing necessary set-up when working in a + repository. Stop doing so. + + * The code to parse the command line "git grep <patterns>... <rev> + [[--] <pathspec>...]" has been cleaned up, and a handful of bugs + have been fixed (e.g. we used to check "--" if it is a rev). + + * The code to parse "git -c VAR=VAL cmd" and set configuration + variable for the duration of cmd had two small bugs, which have + been fixed. + This supersedes jc/config-case-cmdline topic that has been discarded. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.12.3.txt b/Documentation/RelNotes/2.12.3.txt new file mode 100644 index 0000000..73ce7da --- /dev/null +++ b/Documentation/RelNotes/2.12.3.txt @@ -0,0 +1,57 @@ +Git v2.12.3 Release Notes +========================= + +Fixes since v2.12.2 +------------------- + + * The "parse_config_key()" API function has been cleaned up. + + * An helper function to make it easier to append the result from + real_path() to a strbuf has been added. + + * The t/perf performance test suite was not prepared to test not so + old versions of Git, but now it covers versions of Git that are not + so ancient. + + * Picking two versions of Git and running tests to make sure the + older one and the newer one interoperate happily has now become + possible. + + * Teach the "debug" helper used in the test framework that allows a + command to run under "gdb" to make the session interactive. + + * "git repack --depth=<n>" for a long time busted the specified depth + when reusing delta from existing packs. This has been corrected. + + * user.email that consists of only cruft chars should consistently + error out, but didn't. + + * A few tests were run conditionally under (rare) conditions where + they cannot be run (like running cvs tests under 'root' account). + + * "git branch @" created refs/heads/@ as a branch, and in general the + code that handled @{-1} and @{upstream} was a bit too loose in + disambiguating. + + * "git fetch" that requests a commit by object name, when the other + side does not allow such an request, failed without much + explanation. + + * "git filter-branch --prune-empty" drops a single-parent commit that + becomes a no-op, but did not drop a root commit whose tree is empty. + + * Recent versions of Git treats http alternates (used in dumb http + transport) just like HTTP redirects and requires the client to + enable following it, due to security concerns. But we forgot to + give a warning when we decide not to honor the alternates. + + * NO_PTHREADS build has been broken for some time; now fixed. + + * Fix for potential segv introduced in v2.11.0 and later (also + v2.10.2). + + * A few unterminated here documents in tests were fixed, which in + turn revealed incorrect expectations the tests make. These tests + have been updated. + +Also contains various documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.13.0.txt b/Documentation/RelNotes/2.13.0.txt new file mode 100644 index 0000000..f13eb75 --- /dev/null +++ b/Documentation/RelNotes/2.13.0.txt @@ -0,0 +1,446 @@ +Git 2.13 Release Notes +====================== + +Backward compatibility notes. + + * Use of an empty string as a pathspec element that is used for + 'everything matches' is still warned and Git asks users to use a + more explicit '.' for that instead. The hope is that existing + users will not mind this change, and eventually the warning can be + turned into a hard error, upgrading the deprecation into removal of + this (mis)feature. That is not scheduled to happen in the upcoming + release (yet). + + * The historical argument order "git merge <msg> HEAD <commit>..." + has been deprecated for quite some time, and is now removed. + + * The default location "~/.git-credential-cache/socket" for the + socket used to communicate with the credential-cache daemon has + been moved to "~/.cache/git/credential/socket". + + * Git now avoids blindly falling back to ".git" when the setup + sequence said we are _not_ in Git repository. A corner case that + happens to work right now may be broken by a call to die("BUG"). + We've tried hard to locate such cases and fixed them, but there + might still be cases that need to be addressed--bug reports are + greatly appreciated. + + +Updates since v2.12 +------------------- + +UI, Workflows & Features + + * "git describe" and "git name-rev" have been taught to take more + than one refname patterns to restrict the set of refs to base their + naming output on, and also learned to take negative patterns to + name refs not to be used for naming via their "--exclude" option. + + * Deletion of a branch "foo/bar" could remove .git/refs/heads/foo + once there no longer is any other branch whose name begins with + "foo/", but we didn't do so so far. Now we do. + + * When "git merge" detects a path that is renamed in one history + while the other history deleted (or modified) it, it now reports + both paths to help the user understand what is going on in the two + histories being merged. + + * The <url> part in "http.<url>.<variable>" configuration variable + can now be spelled with '*' that serves as wildcard. + E.g. "http.https://*.example.com.proxy" can be used to specify the + proxy used for https://a.example.com, https://b.example.com, etc., + i.e. any host in the example.com domain. + + * "git tag" did not leave useful message when adding a new entry to + reflog; this was left unnoticed for a long time because refs/tags/* + doesn't keep reflog by default. + + * The "negative" pathspec feature was somewhat more cumbersome to use + than necessary in that its short-hand used "!" which needed to be + escaped from shells, and it required "exclude from what?" specified. + + * The command line options for ssh invocation needs to be tweaked for + some implementations of SSH (e.g. PuTTY plink wants "-P <port>" + while OpenSSH wants "-p <port>" to specify port to connect to), and + the variant was guessed when GIT_SSH environment variable is used + to specify it. The logic to guess now applies to the command + specified by the newer GIT_SSH_COMMAND and also core.sshcommand + configuration variable, and comes with an escape hatch for users to + deal with misdetected cases. + + * The "--git-path", "--git-common-dir", and "--shared-index-path" + options of "git rev-parse" did not produce usable output. They are + now updated to show the path to the correct file, relative to where + the caller is. + + * "git diff -W" has been taught to handle the case where a new + function is added at the end of the file better. + + * "git update-ref -d" and other operations to delete references did + not leave any entry in HEAD's reflog when the reference being + deleted was the current branch. This is not a problem in practice + because you do not want to delete the branch you are currently on, + but caused renaming of the current branch to something else not to + be logged in a useful way. + + * "Cc:" on the trailer part does not have to conform to RFC strictly, + unlike in the e-mail header. "git send-email" has been updated to + ignore anything after '>' when picking addresses, to allow non-address + cruft like " # stable 4.4" after the address. + + * When "git submodule init" decides that the submodule in the working + tree is its upstream, it now gives a warning as it is not a very + common setup. + + * "git stash push" takes a pathspec so that the local changes can be + stashed away only partially. + + * Documentation for "git ls-files" did not refer to core.quotePath. + + * The experimental "split index" feature has gained a few + configuration variables to make it easier to use. + + * From a working tree of a repository, a new option of "rev-parse" + lets you ask if the repository is used as a submodule of another + project, and where the root level of the working tree of that + project (i.e. your superproject) is. + + * The pathspec mechanism learned to further limit the paths that + match the pattern to those that have specified attributes attached + via the gitattributes mechanism. + + * Our source code has used the SHA1_HEADER cpp macro after "#include" + in the C code to switch among the SHA-1 implementations. Instead, + list the exact header file names and switch among implementations + using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif"; + this helps some IDE tools. + + * The start-up sequence of "git" needs to figure out some configured + settings before it finds and set itself up in the location of the + repository and was quite messy due to its "chicken-and-egg" nature. + The code has been restructured. + + * The command line prompt (in contrib/) learned a new 'tag' style + that can be specified with GIT_PS1_DESCRIBE_STYLE, to describe a + detached HEAD with "git describe --tags". + + * The configuration file learned a new "includeIf.<condition>.path" + that includes the contents of the given path only when the + condition holds. This allows you to say "include this work-related + bit only in the repositories under my ~/work/ directory". + + * Recent update to "rebase -i" started showing a message that is not + a warning with "warning:" prefix by mistake. This has been fixed. + + * Recently we started passing the "--push-options" through the + external remote helper interface; now the "smart HTTP" remote + helper understands what to do with the passed information. + + * "git describe --dirty" dies when it cannot be determined if the + state in the working tree matches that of HEAD (e.g. broken + repository or broken submodule). The command learned a new option + "git describe --broken" to give "$name-broken" (where $name is the + description of HEAD) in such a case. + + * "git checkout" is taught the "--recurse-submodules" option. + + * Recent enhancement to "git stash push" command to support pathspec + to allow only a subset of working tree changes to be stashed away + was found to be too chatty and exposed the internal implementation + detail (e.g. when it uses reset to match the index to HEAD before + doing other things, output from reset seeped out). These, and + other chattyness has been fixed. + + * "git merge <message> HEAD <commit>" syntax that has been deprecated + since October 2007 has been removed. + + * The refs completion for large number of refs has been sped up, + partly by giving up disambiguating ambiguous refs and partly by + eliminating most of the shell processing between 'git for-each-ref' + and 'ls-remote' and Bash's completion facility. + + * On many keyboards, typing "@{" involves holding down SHIFT key and + one can easily end up with "@{Up..." when typing "@{upstream}". As + the upstream/push keywords do not appear anywhere else in the syntax, + we can safely accept them case insensitively without introducing + ambiguity or confusion to solve this. + + +Performance, Internal Implementation, Development Support etc. + + * The code to list branches in "git branch" has been consolidated + with the more generic ref-filter API. + + * Resource usage while enumerating refs from alternate object store + has been optimized to help receiving end of "push" that hosts a + repository with many "forks". + + * The gitattributes machinery is being taught to work better in a + multi-threaded environment. + + * "git rebase -i" starts using the recently updated "sequencer" code. + + * Code and design clean-up for the refs API. + + * The preload-index code has been taught not to bother with the index + entries that are paths that are not checked out by "sparse checkout". + + * Some warning() messages from "git clean" were updated to show the + errno from failed system calls. + + * The "parse_config_key()" API function has been cleaned up. + + * A test that creates a confusing branch whose name is HEAD has been + corrected not to do so. + + * The code that parses header fields in the commit object has been + updated for (micro)performance and code hygiene. + + * An helper function to make it easier to append the result from + real_path() to a strbuf has been added. + + * Reduce authentication round-trip over HTTP when the server supports + just a single authentication method. This also improves the + behaviour when Git is misconfigured to enable http.emptyAuth + against a server that does not authenticate without a username + (i.e. not using Kerberos etc., which makes http.emptyAuth + pointless). + + * Windows port wants to use OpenSSL's implementation of SHA-1 + routines, so let them. + + * The t/perf performance test suite was not prepared to test not so + old versions of Git, but now it covers versions of Git that are not + so ancient. + + * Add 32-bit Linux variant to the set of platforms to be tested with + Travis CI. + + * "git branch --list" takes the "--abbrev" and "--no-abbrev" options + to control the output of the object name in its "-v"(erbose) + output, but a recent update started ignoring them; fix it before + the breakage reaches to any released version. + + * Picking two versions of Git and running tests to make sure the + older one and the newer one interoperate happily has now become + possible. + + * "uchar [40]" to "struct object_id" conversion continues. + + * "git tag --contains" used to (ab)use the object bits to keep track + of the state of object reachability without clearing them after + use; this has been cleaned up and made to use the newer commit-slab + facility. + + * The "debug" helper used in the test framework learned to run + a command under "gdb" interactively. + + * The "detect attempt to create collisions" variant of SHA-1 + implementation by Marc Stevens (CWI) and Dan Shumow (Microsoft) + has been integrated and made the default. + + * The test framework learned to detect unterminated here documents. + + * The name-hash used for detecting paths that are different only in + cases (which matter on case insensitive filesystems) has been + optimized to take advantage of multi-threading when it makes sense. + + * An earlier version of sha1dc/sha1.c that was merged to 'master' + compiled incorrectly on Windows, which has been fixed. + + * "what URL do we want to update this submodule?" and "are we + interested in this submodule?" are split into two distinct + concepts, and then the way used to express the latter got extended, + paving a way to make it easier to manage a project with many + submodules and make it possible to later extend use of multiple + worktrees for a project with submodules. + + * Some debugging output from "git describe" were marked for l10n, + but some weren't. Mark missing ones for l10n. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.12 +----------------- + +Unless otherwise noted, all the fixes since v2.12 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git repack --depth=<n>" for a long time busted the specified depth + when reusing delta from existing packs. This has been corrected. + + * The code to parse the command line "git grep <patterns>... <rev> + [[--] <pathspec>...]" has been cleaned up, and a handful of bugs + have been fixed (e.g. we used to check "--" if it is a rev). + + * "git ls-remote" and "git archive --remote" are designed to work + without being in a directory under Git's control. However, recent + updates revealed that we randomly look into a directory called + .git/ without actually doing necessary set-up when working in a + repository. Stop doing so. + + * "git show-branch" expected there were only very short branch names + in the repository and used a fixed-length buffer to hold them + without checking for overflow. + + * A caller of tempfile API that uses stdio interface to write to + files may ignore errors while writing, which is detected when + tempfile is closed (with a call to ferror()). By that time, the + original errno that may have told us what went wrong is likely to + be long gone and was overwritten by an irrelevant value. + close_tempfile() now resets errno to EIO to make errno at least + predictable. + + * "git remote rm X", when a branch has remote X configured as the + value of its branch.*.remote, tried to remove branch.*.remote and + branch.*.merge and failed if either is unset. + + * A "gc.log" file left by a backgrounded "gc --auto" disables further + automatic gc; it has been taught to run at least once a day (by + default) by ignoring a stale "gc.log" file that is too old. + + * The code to parse "git -c VAR=VAL cmd" and set configuration + variable for the duration of cmd had two small bugs, which have + been fixed. + + * user.email that consists of only cruft chars should consistently + error out, but didn't. + + * "git upload-pack", which is a counter-part of "git fetch", did not + report a request for a ref that was not advertised as invalid. + This is generally not a problem (because "git fetch" will stop + before making such a request), but is the right thing to do. + + * A leak in a codepath to read from a packed object in (rare) cases + has been plugged. + + * When a redirected http transport gets an error during the + redirected request, we ignored the error we got from the server, + and ended up giving a not-so-useful error message. + + * The patch subcommand of "git add -i" was meant to have paths + selection prompt just like other subcommand, unlike "git add -p" + directly jumps to hunk selection. Recently, this was broken and + "add -i" lost the paths selection dialog, but it now has been + fixed. + + * Git v2.12 was shipped with an embarrassing breakage where various + operations that verify paths given from the user stopped dying when + seeing an issue, and instead later triggering segfault. + + * There is no need for Python only to give a few messages to the + standard error stream, but we somehow did. + + * The code to parse "git log -L..." command line was buggy when there + are many ranges specified with -L; overrun of the allocated buffer + has been fixed. + + * The command-line parsing of "git log -L" copied internal data + structures using incorrect size on ILP32 systems. + + * "git diff --quiet" relies on the size field in diff_filespec to be + correctly populated, but diff_populate_filespec() helper function + made an incorrect short-cut when asked only to populate the size + field for paths that need to go through convert_to_git() (e.g. CRLF + conversion). + + * A few tests were run conditionally under (rare) conditions where + they cannot be run (like running cvs tests under 'root' account). + + * "git branch @" created refs/heads/@ as a branch, and in general the + code that handled @{-1} and @{upstream} was a bit too loose in + disambiguating. + + * "git fetch" that requests a commit by object name, when the other + side does not allow such an request, failed without much + explanation. + + * "git filter-branch --prune-empty" drops a single-parent commit that + becomes a no-op, but did not drop a root commit whose tree is empty. + + * Recent versions of Git treats http alternates (used in dumb http + transport) just like HTTP redirects and requires the client to + enable following it, due to security concerns. But we forgot to + give a warning when we decide not to honor the alternates. + + * "git push" had a handful of codepaths that could lead to a deadlock + when unexpected error happened, which has been fixed. + + * "Dumb http" transport used to misparse a nonsense http-alternates + response, which has been fixed. + + * "git add -p <pathspec>" unnecessarily expanded the pathspec to a + list of individual files that matches the pathspec by running "git + ls-files <pathspec>", before feeding it to "git diff-index" to see + which paths have changes, because historically the pathspec + language supported by "diff-index" was weaker. These days they are + equivalent and there is no reason to internally expand it. This + helps both performance and avoids command line argument limit on + some platforms. + (merge 7288e12cce jk/add-i-use-pathspecs later to maint). + + * "git status --porcelain" is supposed to give a stable output, but a + few strings were left as translatable by mistake. + + * "git revert -m 0 $merge_commit" complained that reverting a merge + needs to say relative to which parent the reversion needs to + happen, as if "-m 0" weren't given. The correct diagnosis is that + "-m 0" does not refer to the first parent ("-m 1" does). This has + been fixed. + + * Code to read submodule.<name>.ignore config did not state the + variable name correctly when giving an error message diagnosing + misconfiguration. + + * Fix for NO_PTHREADS build. + + * Fix for potential segv introduced in v2.11.0 and later (also + v2.10.2) to "git log --pickaxe-regex -S". + + * A few unterminated here documents in tests were fixed, which in + turn revealed incorrect expectations the tests make. These tests + have been updated. + + * Fix for NO_PTHREADS option. + (merge 2225e1ea20 bw/grep-recurse-submodules later to maint). + + * Git now avoids blindly falling back to ".git" when the setup + sequence said we are _not_ in Git repository. A corner case that + happens to work right now may be broken by a call to die("BUG"). + (merge b1ef400eec jk/no-looking-at-dotgit-outside-repo-final later to maint). + + * A few commands that recently learned the "--recurse-submodule" + option misbehaved when started from a subdirectory of the + superproject. + (merge b2dfeb7c00 bw/recurse-submodules-relative-fix later to maint). + + * FreeBSD implementation of getcwd(3) behaved differently when an + intermediate directory is unreadable/unsearchable depending on the + length of the buffer provided, which our strbuf_getcwd() was not + aware of. strbuf_getcwd() has been taught to cope with it better. + (merge a54e938e5b rs/freebsd-getcwd-workaround later to maint). + + * A recent update to "rebase -i" stopped running hooks for the "git + commit" command during "reword" action, which has been fixed. + + * Removing an entry from a notes tree and then looking another note + entry from the resulting tree using the internal notes API + functions did not work as expected. No in-tree users of the API + has such access pattern, but it still is worth fixing. + + * "git receive-pack" could have been forced to die by attempting + allocate an unreasonably large amount of memory with a crafted push + certificate; this has been fixed. + (merge f2214dede9 bc/push-cert-receive-fix later to maint). + + * Other minor doc, test and build updates and code cleanups. + (merge df2a6e38b7 jk/pager-in-use later to maint). + (merge 75ec4a6cb0 ab/branch-list-doc later to maint). + (merge 3e5b36c637 sg/skip-prefix-in-prettify-refname later to maint). + (merge 2c5e2865cc jk/fast-import-cleanup later to maint). + (merge 4473060bc2 ab/test-readme-updates later to maint). + (merge 48a96972fd ab/doc-submitting later to maint). + (merge f5c2bc2b96 jk/make-coccicheck-detect-errors later to maint). diff --git a/Documentation/RelNotes/2.3.10.txt b/Documentation/RelNotes/2.3.10.txt index 9d425d8..20c2d2c 100644 --- a/Documentation/RelNotes/2.3.10.txt +++ b/Documentation/RelNotes/2.3.10.txt @@ -7,7 +7,7 @@ Fixes since v2.3.9 * xdiff code we use to generate diffs is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in - our input files, for example. Cap the input size to soemwhere + our input files, for example. Cap the input size to somewhere around 1GB for now. * Some protocols (like git-remote-ext) can execute arbitrary code diff --git a/Documentation/RelNotes/2.4.10.txt b/Documentation/RelNotes/2.4.10.txt index 8621199..702d8d4 100644 --- a/Documentation/RelNotes/2.4.10.txt +++ b/Documentation/RelNotes/2.4.10.txt @@ -7,7 +7,7 @@ Fixes since v2.4.9 * xdiff code we use to generate diffs is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in - our input files, for example. Cap the input size to soemwhere + our input files, for example. Cap the input size to somewhere around 1GB for now. * Some protocols (like git-remote-ext) can execute arbitrary code diff --git a/Documentation/RelNotes/2.4.11.txt b/Documentation/RelNotes/2.4.11.txt new file mode 100644 index 0000000..7233602 --- /dev/null +++ b/Documentation/RelNotes/2.4.11.txt @@ -0,0 +1,11 @@ +Git v2.4.11 Release Notes +========================= + +Fixes since v2.4.10 +------------------- + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.5.4.txt b/Documentation/RelNotes/2.5.4.txt index a5e8477..b8a2f93 100644 --- a/Documentation/RelNotes/2.5.4.txt +++ b/Documentation/RelNotes/2.5.4.txt @@ -7,7 +7,7 @@ Fixes since v2.5.4 * xdiff code we use to generate diffs is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in - our input files, for example. Cap the input size to soemwhere + our input files, for example. Cap the input size to somewhere around 1GB for now. * Some protocols (like git-remote-ext) can execute arbitrary code diff --git a/Documentation/RelNotes/2.5.5.txt b/Documentation/RelNotes/2.5.5.txt new file mode 100644 index 0000000..37eae9a --- /dev/null +++ b/Documentation/RelNotes/2.5.5.txt @@ -0,0 +1,11 @@ +Git v2.5.5 Release Notes +======================== + +Fixes since v2.5.4 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.6.1.txt b/Documentation/RelNotes/2.6.1.txt index 1e51363..f37ea89 100644 --- a/Documentation/RelNotes/2.6.1.txt +++ b/Documentation/RelNotes/2.6.1.txt @@ -7,7 +7,7 @@ Fixes since v2.6 * xdiff code we use to generate diffs is not prepared to handle extremely large files. It uses "int" in many places, which can overflow if we have a very large number of lines or even bytes in - our input files, for example. Cap the input size to soemwhere + our input files, for example. Cap the input size to somewhere around 1GB for now. * Some protocols (like git-remote-ext) can execute arbitrary code diff --git a/Documentation/RelNotes/2.6.5.txt b/Documentation/RelNotes/2.6.5.txt index 3e6331d..f0924b6 100644 --- a/Documentation/RelNotes/2.6.5.txt +++ b/Documentation/RelNotes/2.6.5.txt @@ -35,5 +35,24 @@ Fixes since v2.6.4 * The exit code of git-fsck did not reflect some types of errors found in packed objects, which has been corrected. + * The completion script (in contrib/) used to list "git column" + (which is not an end-user facing command) as one of the choices + + * Improve error reporting when SMTP TLS fails. + + * When getpwuid() on the system returned NULL (e.g. the user is not + in the /etc/passwd file or other uid-to-name mappings), the + codepath to find who the user is to record it in the reflog barfed + and died. Loosen the check in this codepath, which already accepts + questionable ident string (e.g. host part of the e-mail address is + obviously bogus), and in general when we operate fmt_ident() function + in non-strict mode. + + * "git symbolic-ref" forgot to report a failure with its exit status. + + * History traversal with "git log --source" that starts with an + annotated tag failed to report the tag as "source", due to an + old regression in the command line parser back in v2.2 days. + Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/2.6.6.txt b/Documentation/RelNotes/2.6.6.txt new file mode 100644 index 0000000..023ad85 --- /dev/null +++ b/Documentation/RelNotes/2.6.6.txt @@ -0,0 +1,11 @@ +Git v2.6.6 Release Notes +======================== + +Fixes since v2.6.5 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.7.0.txt b/Documentation/RelNotes/2.7.0.txt index a84caba..563dadc 100644 --- a/Documentation/RelNotes/2.7.0.txt +++ b/Documentation/RelNotes/2.7.0.txt @@ -6,6 +6,10 @@ Updates since v2.6 UI, Workflows & Features + * The appearance of "gitk", particularly on high DPI monitors, have + been improved. "gitk" also comes with an undated translation for + Swedish and Japanese. + * "git remote" learned "get-url" subcommand to show the URL for a given remote name used for fetching and pushing. @@ -22,7 +26,7 @@ UI, Workflows & Features * Users who are too busy to type three extra keystrokes to ask for "git stash show -p" can now set stash.showPatch configuration - varible to true to always see the actual patch, not just the list + variable to true to always see the actual patch, not just the list of paths affected with feel for the extent of damage via diffstat. * "quiltimport" allows to specify the series file by honoring the @@ -65,7 +69,7 @@ UI, Workflows & Features a superset of "--no-progress". Extend the command to support the usual "--[no-]progress". - * The semantics of tranfer.hideRefs configuration variable have been + * The semantics of transfer.hideRefs configuration variable have been extended to work better with the ref "namespace" feature that lets you throw unrelated bunches of repositories in a single physical repository and virtually serve them as separate ones. @@ -79,6 +83,12 @@ UI, Workflows & Features * The credential-cache daemon can be told to ignore SIGHUP to work around issue when running Git from inside emacs. + * "git push" learned new configuration for doing "--recurse-submodules" + on each push. + + * "format-patch" has learned a new option to zero-out the commit + object name on the mbox "From " line. + Performance, Internal Implementation, Development Support etc. @@ -161,6 +171,9 @@ Performance, Internal Implementation, Development Support etc. git/git (including build-status for pull requests that people open). + * The write(2) emulation for Windows learned to set errno to EPIPE + when necessary. + Also contains various documentation updates and code clean-ups. @@ -370,4 +383,32 @@ notes for details). them instead, with a new configuration git-p4.keepEmptyCommits as a backward compatibility knob. + * The completion script (in contrib/) used to list "git column" + (which is not an end-user facing command) as one of the choices + (merge 160fcdb sg/completion-no-column later to maint). + + * The error reporting from "git send-email", when SMTP TLS fails, has + been improved. + (merge 9d60524 jk/send-email-ssl-errors later to maint). + + * When getpwuid() on the system returned NULL (e.g. the user is not + in the /etc/passwd file or other uid-to-name mappings), the + codepath to find who the user is to record it in the reflog barfed + and died. Loosen the check in this codepath, which already accepts + questionable ident string (e.g. host part of the e-mail address is + obviously bogus), and in general when we operate fmt_ident() function + in non-strict mode. + (merge 92bcbb9 jk/ident-loosen-getpwuid later to maint). + + * "git symbolic-ref" forgot to report a failure with its exit status. + (merge f91b273 jk/symbolic-ref-maint later to maint). + + * History traversal with "git log --source" that starts with an + annotated tag failed to report the tag as "source", due to an + old regression in the command line parser back in v2.2 days. + (merge 728350b jk/pending-keep-tag-name later to maint). + + * "git p4" when interacting with multiple depots at the same time + used to incorrectly drop changes. + * Code clean-up, minor fixes etc. diff --git a/Documentation/RelNotes/2.7.1.txt b/Documentation/RelNotes/2.7.1.txt new file mode 100644 index 0000000..6553d69 --- /dev/null +++ b/Documentation/RelNotes/2.7.1.txt @@ -0,0 +1,87 @@ +Git v2.7.1 Release Notes +======================== + +Fixes since v2.7 +---------------- + + * An earlier change in 2.5.x-era broke users' hooks and aliases by + exporting GIT_WORK_TREE to point at the root of the working tree, + interfering when they tried to use a different working tree without + setting GIT_WORK_TREE environment themselves. + + * The "exclude_list" structure has the usual "alloc, nr" pair of + fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot + to reset 'alloc' to 0 when it cleared 'nr' to discard the managed + array. + + * "git send-email" was confused by escaped quotes stored in the alias + files saved by "mutt", which has been corrected. + + * A few unportable C construct have been spotted by clang compiler + and have been fixed. + + * The documentation has been updated to hint the connection between + the '--signoff' option and DCO. + + * "git reflog" incorrectly assumed that all objects that used to be + at the tip of a ref must be commits, which caused it to segfault. + + * The ignore mechanism saw a few regressions around untracked file + listing and sparse checkout selection areas in 2.7.0; the change + that is responsible for the regression has been reverted. + + * Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR + (e.g. COMMIT_EDITMSG) that is meant to be left after the command is + done. This however did not work well if the repository is set to + be shared with core.sharedRepository and the umask of the previous + user is tighter. They have been made to work better by calling + unlink(2) and retrying after fopen(3) fails with EPERM. + + * Asking gitweb for a nonexistent commit left a warning in the server + log. + + * "git rebase", unlike all other callers of "gc --auto", did not + ignore the exit code from "gc --auto". + + * Many codepaths that run "gc --auto" before exiting kept packfiles + mapped and left the file descriptors to them open, which was not + friendly to systems that cannot remove files that are open. They + now close the packs before doing so. + + * A recent optimization to filter-branch in v2.7.0 introduced a + regression when --prune-empty filter is used, which has been + corrected. + + * The description for SANITY prerequisite the test suite uses has + been clarified both in the comment and in the implementation. + + * "git tag" started listing a tag "foo" as "tags/foo" when a branch + named "foo" exists in the same repository; remove this unnecessary + disambiguation, which is a regression introduced in v2.7.0. + + * The way "git svn" uses auth parameter was broken by Subversion + 1.9.0 and later. + + * The "split" subcommand of "git subtree" (in contrib/) incorrectly + skipped merges when it shouldn't, which was corrected. + + * A few options of "git diff" did not work well when the command was + run from a subdirectory. + + * dirname() emulation has been added, as Msys2 lacks it. + + * The underlying machinery used by "ls-files -o" and other commands + have been taught not to create empty submodule ref cache for a + directory that is not a submodule. This removes a ton of wasted + CPU cycles. + + * Drop a few old "todo" items by deciding that the change one of them + suggests is not such a good idea, and doing the change the other + one suggested to do. + + * Documentation for "git fetch --depth" has been updated for clarity. + + * The command line completion learned a handful of additional options + and command specific syntax. + +Also includes a handful of documentation and test updates. diff --git a/Documentation/RelNotes/2.7.2.txt b/Documentation/RelNotes/2.7.2.txt new file mode 100644 index 0000000..4feef76 --- /dev/null +++ b/Documentation/RelNotes/2.7.2.txt @@ -0,0 +1,41 @@ +Git v2.7.2 Release Notes +======================== + +Fixes since v2.7.1 +------------------ + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain backpointers to its worktrees, but + "mv" run by end-users who are not familiar with that fact will + obviously not adjust them), which actually made things worse + when triggered. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + +Also includes tiny documentation and test updates. diff --git a/Documentation/RelNotes/2.7.3.txt b/Documentation/RelNotes/2.7.3.txt new file mode 100644 index 0000000..6adf038 --- /dev/null +++ b/Documentation/RelNotes/2.7.3.txt @@ -0,0 +1,62 @@ +Git v2.7.3 Release Notes +======================== + +Fixes since v2.7.2 +------------------ + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + +Also includes documentation and test updates. diff --git a/Documentation/RelNotes/2.7.4.txt b/Documentation/RelNotes/2.7.4.txt new file mode 100644 index 0000000..883ae89 --- /dev/null +++ b/Documentation/RelNotes/2.7.4.txt @@ -0,0 +1,11 @@ +Git v2.7.4 Release Notes +======================== + +Fixes since v2.7.3 +------------------ + + * Bugfix patches were backported from the 'master' front to plug heap + corruption holes, to catch integer overflow in the computation of + pathname lengths, and to get rid of the name_path API. Both of + these would have resulted in writing over an under-allocated buffer + when formulating pathnames while tree traversal. diff --git a/Documentation/RelNotes/2.8.0.txt b/Documentation/RelNotes/2.8.0.txt new file mode 100644 index 0000000..2507971 --- /dev/null +++ b/Documentation/RelNotes/2.8.0.txt @@ -0,0 +1,439 @@ +Git 2.8 Release Notes +===================== + +Backward compatibility note +--------------------------- + +The rsync:// transport has been removed. + + +Updates since v2.7 +------------------ + +UI, Workflows & Features + + * It turns out "git clone" over rsync transport has been broken when + the source repository has packed references for a long time, and + nobody noticed nor complained about it. + + * "push" learned that its "--delete" option can be shortened to + "-d", just like "branch --delete" and "branch -d" are the same + thing. + + * "git blame" learned to produce the progress eye-candy when it takes + too much time before emitting the first line of the result. + + * "git grep" can now be configured (or told from the command line) + how many threads to use when searching in the working tree files. + + * Some "git notes" operations, e.g. "git log --notes=<note>", should + be able to read notes from any tree-ish that is shaped like a notes + tree, but the notes infrastructure required that the argument must + be a ref under refs/notes/. Loosen it to require a valid ref only + when the operation would update the notes (in which case we must + have a place to store the updated notes tree, iow, a ref). + + * "git grep" by default does not fall back to its "--no-index" + behavior outside a directory under Git's control (otherwise the + user may by mistake end up running a huge recursive search); with a + new configuration (set in $HOME/.gitconfig--by definition this + cannot be set in the config file per project), this safety can be + disabled. + + * "git pull --rebase" has been extended to allow invoking + "rebase -i". + + * "git p4" learned to cope with the type of a file getting changed. + + * "git format-patch" learned to notice format.outputDirectory + configuration variable. This allows "-o <dir>" option to be + omitted on the command line if you always use the same directory in + your workflow. + + * "interpret-trailers" has been taught to optionally update a file in + place, instead of always writing the result to the standard output. + + * Many commands that read files that are expected to contain text + that is generated (or can be edited) by the end user to control + their behavior (e.g. "git grep -f <filename>") have been updated + to be more tolerant to lines that are terminated with CRLF (they + used to treat such a line to contain payload that ends with CR, + which is usually not what the users expect). + + * "git notes merge" used to limit the source of the merged notes tree + to somewhere under refs/notes/ hierarchy, which was too limiting + when inventing a workflow to exchange notes with remote + repositories using remote-tracking notes trees (located in e.g. + refs/remote-notes/ or somesuch). + + * "git ls-files" learned a new "--eol" option to help diagnose + end-of-line problems. + + * "ls-remote" learned an option to show which branch the remote + repository advertises as its primary by pointing its HEAD at. + + * New http.proxyAuthMethod configuration variable can be used to + specify what authentication method to use, as a way to work around + proxies that do not give error response expected by libcurl when + CURLAUTH_ANY is used. Also, the codepath for proxy authentication + has been taught to use credential API to store the authentication + material in user's keyrings. + + * Update the untracked cache subsystem and change its primary UI from + "git update-index" to "git config". + + * There were a few "now I am doing this thing" progress messages in + the TCP connection code that can be triggered by setting a verbose + option internally in the code, but "git fetch -v" and friends never + passed the verbose option down to that codepath. + + * Clean/smudge filters defined in a configuration file of lower + precedence can now be overridden to be a pass-through no-op by + setting the variable to an empty string. + + * A new "<branch>^{/!-<pattern>}" notation can be used to name a + commit that is reachable from <branch> that does not match the + given <pattern>. + + * The "user.useConfigOnly" configuration variable can be used to + force the user to always set user.email & user.name configuration + variables, serving as a reminder for those who work on multiple + projects and do not want to put these in their $HOME/.gitconfig. + + * "git fetch" and friends that make network connections can now be + told to only use ipv4 (or ipv6). + + * Some authentication methods do not need username or password, but + libcurl needs some hint that it needs to perform authentication. + Supplying an empty username and password string is a valid way to + do so, but you can set the http.[<url>.]emptyAuth configuration + variable to achieve the same, if you find it cleaner. + + * You can now set http.[<url>.]pinnedpubkey to specify the pinned + public key when building with recent enough versions of libcURL. + + * The configuration system has been taught to phrase where it found a + bad configuration variable in a better way in its error messages. + "git config" learnt a new "--show-origin" option to indicate where + the values come from. + + * The "credential-cache" daemon process used to run in whatever + directory it happened to start in, but this made umount(2)ing the + filesystem that houses the repository harder; now the process + chdir()s to the directory that house its own socket on startup. + + * When "git submodule update" did not result in fetching the commit + object in the submodule that is referenced by the superproject, the + command learned to retry another fetch, specifically asking for + that commit that may not be connected to the refs it usually + fetches. + + * "git merge-recursive" learned "--no-renames" option to disable its + rename detection logic. + + * Across the transition at around Git version 2.0, the user used to + get a pretty loud warning when running "git push" without setting + push.default configuration variable. We no longer warn because the + transition was completed a long time ago. + + * README has been renamed to README.md and its contents got tweaked + slightly to make it easier on the eyes. + + +Performance, Internal Implementation, Development Support etc. + + * Add a framework to spawn a group of processes in parallel, and use + it to run "git fetch --recurse-submodules" in parallel. + + * A slight update to the Makefile to mark ".PHONY" targets as such + correctly. + + * In-core storage of the reverse index for .pack files (which lets + you go from a pack offset to an object name) has been streamlined. + + * d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like + $GIT_DIR, 2015-06-26) attempted to work around a glitch in alias + handling by overwriting GIT_WORK_TREE environment variable to + affect subprocesses when set_git_work_tree() gets called, which + resulted in a rather unpleasant regression to "clone" and "init". + Try to address the same issue by always restoring the environment + and respawning the real underlying command when handling alias. + + * The low-level code that is used to create symbolic references has + been updated to share more code with the code that deals with + normal references. + + * strbuf_getline() and friends have been redefined to make it easier + to identify which callsite of (new) strbuf_getline_lf() should + allow and silently ignore carriage-return at the end of the line to + help users on DOSsy systems. + + * "git shortlog" used to accumulate various pieces of information + regardless of what was asked to be shown in the final output. It + has been optimized by noticing what need not to be collected + (e.g. there is no need to collect the log messages when showing + only the number of changes). + + * "git checkout $branch" (and other operations that share the same + underlying machinery) has been optimized. + + * Automated tests in Travis CI environment has been optimized by + persisting runtime statistics of previous "prove" run, executing + tests that take longer before other ones; this reduces the total + wallclock time. + + * Test scripts have been updated to remove assumptions that are not + portable between Git for POSIX and Git for Windows, or to skip ones + with expectations that are not satisfiable on Git for Windows. + + * Some calls to strcpy(3) triggers a false warning from static + analyzers that are less intelligent than humans, and reducing the + number of these false hits helps us notice real issues. A few + calls to strcpy(3) in a couple of protrams that are already safe + has been rewritten to avoid false warnings. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat. The API has been removed and its users have been + rewritten to simplify the overall code complexity. + + * Help those who debug http(s) part of the system. + (merge 0054045 sp/remote-curl-ssl-strerror later to maint). + + * The internal API to interact with "remote.*" configuration + variables has been streamlined. + + * The ref-filter's format-parsing code has been refactored, in + preparation for "branch --format" and friends. + + * Traditionally, the tests that try commands that work on the + contents in the working tree were named with "worktree" in their + filenames, but with the recent addition of "git worktree" + subcommand, whose tests are also named similarly, it has become + harder to tell them apart. The traditional tests have been renamed + to use "work-tree" instead in an attempt to differentiate them. + (merge 5549029 mg/work-tree-tests later to maint). + + * Many codepaths forget to check return value from git_config_set(); + the function is made to die() to make sure we do not proceed when + setting a configuration variable failed. + (merge 3d18064 ps/config-error later to maint). + + * Handling of errors while writing into our internal asynchronous + process has been made more robust, which reduces flakiness in our + tests. + (merge 43f3afc jk/epipe-in-async later to maint). + + * There is a new DEVELOPER knob that enables many compiler warning + options in the Makefile. + + * The way the test scripts configure the Apache web server has been + updated to work also for Apache 2.4 running on RedHat derived + distros. + + * Out of maintenance gcc on OSX 10.6 fails to compile the code in + 'master'; work it around by using clang by default on the platform. + + * The "name_path" API was an attempt to reduce the need to construct + the full path out of a series of path components while walking a + tree hierarchy, but over time made less efficient because the path + needs to be flattened, e.g. to be compared with another path that + is already flat, in many cases. The API has been removed and its + users have been rewritten to simplify the overall code complexity. + This incidentally also closes some heap-corruption holes. + + * Recent versions of GNU grep is pickier than before to decide if a + file is "binary" and refuse to give line-oriented hits when we + expect it to, unless explicitly told with "-a" option. As our + scripted Porcelains use sane_grep wrapper for line-oriented data, + even when the line may contain non-ASCII payload we took from + end-user data, use "grep -a" to implement sane_grep wrapper when + using an implementation of "grep" that takes the "-a" option. + + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.7 +---------------- + +Unless otherwise noted, all the fixes since v2.7 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * An earlier change in 2.5.x-era broke users' hooks and aliases by + exporting GIT_WORK_TREE to point at the root of the working tree, + interfering when they tried to use a different working tree without + setting GIT_WORK_TREE environment themselves. + + * The "exclude_list" structure has the usual "alloc, nr" pair of + fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot + to reset 'alloc' to 0 when it cleared 'nr' to discard the managed + array. + + * Paths that have been told the index about with "add -N" are not + quite yet in the index, but a few commands behaved as if they + already are in a harmful way. + + * "git send-email" was confused by escaped quotes stored in the alias + files saved by "mutt", which has been corrected. + + * A few non-portable C construct have been spotted by clang compiler + and have been fixed. + + * The documentation has been updated to hint the connection between + the '--signoff' option and DCO. + + * "git reflog" incorrectly assumed that all objects that used to be + at the tip of a ref must be commits, which caused it to segfault. + + * The ignore mechanism saw a few regressions around untracked file + listing and sparse checkout selection areas in 2.7.0; the change + that is responsible for the regression has been reverted. + + * Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR + (e.g. COMMIT_EDITMSG) that is meant to be left after the command is + done. This however did not work well if the repository is set to + be shared with core.sharedRepository and the umask of the previous + user is tighter. They have been made to work better by calling + unlink(2) and retrying after fopen(3) fails with EPERM. + + * Asking gitweb for a nonexistent commit left a warning in the server + log. + + Somebody may want to follow this up with an additional test, perhaps? + IIRC, we do test that no Perl warnings are given to the server log, + so this should have been caught if our test coverage were good. + + * "git rebase", unlike all other callers of "gc --auto", did not + ignore the exit code from "gc --auto". + + * Many codepaths that run "gc --auto" before exiting kept packfiles + mapped and left the file descriptors to them open, which was not + friendly to systems that cannot remove files that are open. They + now close the packs before doing so. + + * A recent optimization to filter-branch in v2.7.0 introduced a + regression when --prune-empty filter is used, which has been + corrected. + + * The description for SANITY prerequisite the test suite uses has + been clarified both in the comment and in the implementation. + + * "git tag" started listing a tag "foo" as "tags/foo" when a branch + named "foo" exists in the same repository; remove this unnecessary + disambiguation, which is a regression introduced in v2.7.0. + + * The way "git svn" uses auth parameter was broken by Subversion + 1.9.0 and later. + + * The "split" subcommand of "git subtree" (in contrib/) incorrectly + skipped merges when it shouldn't, which was corrected. + + * A few options of "git diff" did not work well when the command was + run from a subdirectory. + + * The command line completion learned a handful of additional options + and command specific syntax. + + * dirname() emulation has been added, as Msys2 lacks it. + + * The underlying machinery used by "ls-files -o" and other commands + has been taught not to create empty submodule ref cache for a + directory that is not a submodule. This removes a ton of wasted + CPU cycles. + + * "git worktree" had a broken code that attempted to auto-fix + possible inconsistency that results from end-users moving a + worktree to different places without telling Git (the original + repository needs to maintain back-pointers to its worktrees, + but "mv" run by end-users who are not familiar with that fact + will obviously not adjust them), which actually made things + worse when triggered. + + * The low-level merge machinery has been taught to use CRLF line + termination when inserting conflict markers to merged contents that + are themselves CRLF line-terminated. + + * "git push --force-with-lease" has been taught to report if the push + needed to force (or fast-forwarded). + + * The emulated "yes" command used in our test scripts has been + tweaked not to spend too much time generating unnecessary output + that is not used, to help those who test on Windows where it would + not stop until it fills the pipe buffer due to lack of SIGPIPE. + + * The documentation for "git clean" has been corrected; it mentioned + that .git/modules/* are removed by giving two "-f", which has never + been the case. + + * The vimdiff backend for "git mergetool" has been tweaked to arrange + and number buffers in the order that would match the expectation of + majority of people who read left to right, then top down and assign + buffers 1 2 3 4 "mentally" to local base remote merge windows based + on that order. + + * "git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a + rev, i.e. the object named by the the pathname with wildcard + characters in a tree object. + (merge aac4fac nd/dwim-wildcards-as-pathspecs later to maint). + + * "git rev-parse --git-common-dir" used in the worktree feature + misbehaved when run from a subdirectory. + (merge 17f1365 nd/git-common-dir-fix later to maint). + + * "git worktree add -B <branchname>" did not work. + + * The "v(iew)" subcommand of the interactive "git am -i" command was + broken in 2.6.0 timeframe when the command was rewritten in C. + (merge 708b8cc jc/am-i-v-fix later to maint). + + * "git merge-tree" used to mishandle "both sides added" conflict with + its own "create a fake ancestor file that has the common parts of + what both sides have added and do a 3-way merge" logic; this has + been updated to use the usual "3-way merge with an empty blob as + the fake common ancestor file" approach used in the rest of the + system. + (merge 907681e jk/no-diff-emit-common later to maint). + + * The memory ownership rule of fill_textconv() API, which was a bit + tricky, has been documented a bit better. + (merge a64e6a4 jk/more-comments-on-textconv later to maint). + + * Update various codepaths to avoid manually-counted malloc(). + (merge 08c95df jk/tighten-alloc later to maint). + + * The documentation did not clearly state that the 'simple' mode is + now the default for "git push" when push.default configuration is + not set. + (merge f6b1fb3 mm/push-simple-doc later to maint). + + * Recent versions of GNU grep are pickier when their input contains + arbitrary binary data, which some of our tests uses. Rewrite the + tests to sidestep the problem. + (merge 3b1442d jk/grep-binary-workaround-in-test later to maint). + + * A helper function "git submodule" uses since v2.7.0 to list the + modules that match the pathspec argument given to its subcommands + (e.g. "submodule add <repo> <path>") has been fixed. + (merge 2b56bb7 sb/submodule-module-list-fix later to maint). + + * "git config section.var value" to set a value in per-repository + configuration file failed when it was run outside any repository, + but didn't say the reason correctly. + (merge 638fa62 js/config-set-in-non-repository later to maint). + + * The code to read the pack data using the offsets stored in the pack + idx file has been made more carefully check the validity of the + data in the idx. + (merge 7465feb jk/pack-idx-corruption-safety later to maint). + + * Other minor clean-ups and documentation updates + (merge f459823 ak/extract-argv0-last-dir-sep later to maint). + (merge 63ca1c0 ak/git-strip-extension-from-dashed-command later to maint). + (merge 4867f11 ps/plug-xdl-merge-leak later to maint). + (merge 4938686 dt/initial-ref-xn-commit-doc later to maint). + (merge 9537f21 ma/update-hooks-sample-typofix later to maint). diff --git a/Documentation/RelNotes/2.8.1.txt b/Documentation/RelNotes/2.8.1.txt new file mode 100644 index 0000000..ef6d80b --- /dev/null +++ b/Documentation/RelNotes/2.8.1.txt @@ -0,0 +1,9 @@ +Git v2.8.1 Release Notes +======================== + +Fixes since v2.8 +---------------- + + * "make rpmbuild" target was broken as its input, git.spec.in, was + not updated to match a file it describes that has been renamed + recently. This has been fixed. diff --git a/Documentation/RelNotes/2.8.2.txt b/Documentation/RelNotes/2.8.2.txt new file mode 100644 index 0000000..447b193 --- /dev/null +++ b/Documentation/RelNotes/2.8.2.txt @@ -0,0 +1,70 @@ +Git v2.8.2 Release Notes +======================== + +Fixes since v2.8.1 +------------------ + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * Bunch of tests on "git clone" has been renumbered for better + organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * "index-pack --keep=<msg>" was broken since v2.1.0 timeframe. + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * Build updates for MSVC. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.8.3.txt b/Documentation/RelNotes/2.8.3.txt new file mode 100644 index 0000000..fedd996 --- /dev/null +++ b/Documentation/RelNotes/2.8.3.txt @@ -0,0 +1,101 @@ +Git v2.8.3 Release Notes +======================== + +Fixes since v2.8.2 +------------------ + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + and http://thread.gmane.org/gmane.comp.version-control.git/275680. + + * "git replace -e" did not honour "core.editor" configuration. + + * Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs + we use in imap-send, which has been adjusted for the change. + + * "git submodule" reports the paths of submodules the command + recurses into, but this was incorrect when the command was not run + from the root level of the superproject. + + * The test scripts for "git p4" (but not "git p4" implementation + itself) has been updated so that they would work even on a system + where the installed version of Python is python 3. + + * The "user.useConfigOnly" configuration variable makes it an error + if users do not explicitly set user.name and user.email. However, + its check was not done early enough and allowed another error to + trigger, reporting that the default value we guessed from the + system setting was unusable. This was a suboptimal end-user + experience as we want the users to set user.name/user.email without + relying on the auto-detection at all. + + * "git mv old new" did not adjust the path for a submodule that lives + as a subdirectory inside old/ directory correctly. + + * "git push" from a corrupt repository that attempts to push a large + number of refs deadlocked; the thread to relay rejection notices + for these ref updates blocked on writing them to the main thread, + after the main thread at the receiving end notices that the push + failed and decides not to read these notices and return a failure. + + * A question by "git send-email" to ask the identity of the sender + has been updated. + + * Recent update to Git LFS broke "git p4" by changing the output from + its "lfs pointer" subcommand. + + * Some multi-byte encoding can have a backslash byte as a later part + of one letter, which would confuse "highlight" filter used in + gitweb. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.8.4.txt b/Documentation/RelNotes/2.8.4.txt new file mode 100644 index 0000000..f4e2552 --- /dev/null +++ b/Documentation/RelNotes/2.8.4.txt @@ -0,0 +1,69 @@ +Git v2.8.4 Release Notes +======================== + +Fixes since v2.8.3 +------------------ + + * Documentation for "git merge --verify-signatures" has been updated + to clarify that the signature of only the commit at the tip is + verified. Also the phrasing used for signature and key validity is + adjusted to align with that used by OpenPGP. + + * On Windows, .git and optionally any files whose name starts with a + dot are now marked as hidden, with a core.hideDotFiles knob to + customize this behaviour. + + * Portability enhancement for "rebase -i" to help platforms whose + shell does not like "for i in <empty>" (which is not POSIX-kosher). + + * "git fsck" learned to catch NUL byte in a commit object as + potential error and warn. + + * CI test was taught to build documentation pages. + + * Many 'linkgit:<git documentation page>' references were broken, + which are all fixed with this. + + * "git describe --contains" often made a hard-to-justify choice of + tag to give name to a given commit, because it tried to come up + with a name with smallest number of hops from a tag, causing an old + commit whose close descendant that is recently tagged were not + described with respect to an old tag but with a newer tag. It did + not help that its computation of "hop" count was further tweaked to + penalize being on a side branch of a merge. The logic has been + updated to favor using the tag with the oldest tagger date, which + is a lot easier to explain to the end users: "We describe a commit + in terms of the (chronologically) oldest tag that contains the + commit." + + * Running tests with '-x' option to trace the individual command + executions is a useful way to debug test scripts, but some tests + that capture the standard error stream and check what the command + said can be broken with the trace output mixed in. When running + our tests under "bash", however, we can redirect the trace output + to another file descriptor to keep the standard error of programs + being tested intact. + + * "http.cookieFile" configuration variable clearly wants a pathname, + but we forgot to treat it as such by e.g. applying tilde expansion. + + * When de-initialising all submodules, "git submodule deinit" gave a + faulty recommendation to use "git submodule deinit .", which would + result in a strange error message in a pathological corner case. + This has been corrected to suggest "submodule deinit --all" instead. + + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * A couple of bugs around core.autocrlf have been fixed. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + +Also contains other minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.0.txt b/Documentation/RelNotes/2.9.0.txt new file mode 100644 index 0000000..b61d367 --- /dev/null +++ b/Documentation/RelNotes/2.9.0.txt @@ -0,0 +1,512 @@ +Git 2.9 Release Notes +===================== + +Backward compatibility notes +---------------------------- + +The end-user facing Porcelain level commands in the "git diff" and +"git log" family by default enable the rename detection; you can still +use "diff.renames" configuration variable to disable this. + +Merging two branches that have no common ancestor with "git merge" is +by default forbidden now to prevent creating such an unusual merge by +mistake. + +The output formats of "git log" that indents the commit log message by +4 spaces now expands HT in the log message by default. You can use +the "--no-expand-tabs" option to disable this. + +"git commit-tree" plumbing command required the user to always sign +its result when the user sets the commit.gpgsign configuration +variable, which was an ancient mistake, which this release corrects. +A script that drives commit-tree, if it relies on this mistake, now +needs to read commit.gpgsign and pass the -S option as necessary. + + +Updates since v2.8 +------------------ + +UI, Workflows & Features + + * Comes with git-multimail 1.3.1 (in contrib/). + + * The end-user facing commands like "git diff" and "git log" + now enable the rename detection by default. + + * The credential.helper configuration variable is cumulative and + there is no good way to override it from the command line. As + a special case, giving an empty string as its value now serves + as the signal to clear the values specified in various files. + + * A new "interactive.diffFilter" configuration can be used to + customize the diff shown in "git add -i" sessions. + + * "git p4" now allows P4 author names to be mapped to Git author + names. + + * "git rebase -x" can be used without passing "-i" option. + + * "git -c credential.<var>=<value> submodule" can now be used to + propagate configuration variables related to credential helper + down to the submodules. + + * "git tag" can create an annotated tag without explicitly given an + "-a" (or "-s") option (i.e. when a tag message is given). A new + configuration variable, tag.forceSignAnnotated, can be used to tell + the command to create signed tag in such a situation. + + * "git merge" used to allow merging two branches that have no common + base by default, which led to a brand new history of an existing + project created and then get pulled by an unsuspecting maintainer, + which allowed an unnecessary parallel history merged into the + existing project. The command has been taught not to allow this by + default, with an escape hatch "--allow-unrelated-histories" option + to be used in a rare event that merges histories of two projects + that started their lives independently. + + * "git pull" has been taught to pass the "--allow-unrelated-histories" + option to underlying "git merge". + + * "git apply -v" learned to report paths in the patch that were + skipped via --include/--exclude mechanism or being outside the + current working directory. + + * Shell completion (in contrib/) updates. + + * The commit object name reported when "rebase -i" stops has been + shortened. + + * "git worktree add" can be given "--no-checkout" option to only + create an empty worktree without checking out the files. + + * "git mergetools" learned to drive ExamDiff. + + * "git pull --rebase" learned "--[no-]autostash" option, so that + the rebase.autostash configuration variable set to true can be + overridden from the command line. + + * When "git log" shows the log message indented by 4-spaces, the + remainder of a line after a HT does not align in the way the author + originally intended. The command now expands tabs by default to help + such a case, and allows the users to override it with a new option, + "--no-expand-tabs". + + * "git send-email" now uses a more readable timestamps when + formulating a message ID. + + * "git rerere" can encounter two or more files with the same conflict + signature that have to be resolved in different ways, but there was + no way to record these separate resolutions. + + * "git p4" learned to record P4 jobs in Git commit that imports from + the history in Perforce. + + * "git describe --contains" often made a hard-to-justify choice of + tag to name a given commit, because it tried to come up + with a name with smallest number of hops from a tag, causing an old + commit whose close descendant that is recently tagged were not + described with respect to an old tag but with a newer tag. It did + not help that its computation of "hop" count was further tweaked to + penalize being on a side branch of a merge. The logic has been + updated to favor using the tag with the oldest tagger date, which + is a lot easier to explain to the end users: "We describe a commit + in terms of the (chronologically) oldest tag that contains the + commit." + + * "git clone" learned the "--shallow-submodules" option. + + * HTTP transport clients learned to throw extra HTTP headers at the + server, specified via http.extraHeader configuration variable. + + * The "--compaction-heuristic" option to "git diff" family of + commands enables a heuristic to make the patch output more readable + by using a blank line as a strong hint that the contents before and + after it belong to logically separate units. It is still + experimental. + + * A new configuration variable core.hooksPath allows customizing + where the hook directory is. + + * An earlier addition of "sanitize_submodule_env" with 14111fc4 (git: + submodule honor -c credential.* from command line, 2016-02-29) + turned out to be a convoluted no-op; implement what it wanted to do + correctly, and stop filtering settings given via "git -c var=val". + + * "git commit --dry-run" reported "No, no, you cannot commit." in one + case where "git commit" would have allowed you to commit, and this + improves it a little bit ("git commit --dry-run --short" still does + not give you the correct answer, for example). This is a stop-gap + measure in that "commit --short --dry-run" still gives an incorrect + result. + + * The experimental "multiple worktree" feature gains more safety to + forbid operations on a branch that is checked out or being actively + worked on elsewhere, by noticing that e.g. it is being rebased. + + * "git format-patch" learned a new "--base" option to record what + (public, well-known) commit the original series was built on in + its output. + + * "git commit" learned to pay attention to the "commit.verbose" + configuration variable and act as if the "--verbose" option + was given from the command line. + + * Updated documentation gives hints to GMail users with two-factor + auth enabled that they need app-specific-password when using + "git send-email". + + * The manpage output of our documentation did not render well in + terminal; typeset literals in bold by default to make them stand + out more. + + * The mark-up in the top-level README.md file has been updated to + typeset CLI command names differently from the body text. + + +Performance, Internal Implementation, Development Support etc. + + * The embedded args argv-array in the child process is used to build + the command line to run pack-objects instead of using a separate + array of strings. + + * A test for tags has been restructured so that more parts of it can + easily be run on a platform without a working GnuPG. + + * The startup_info data, which records if we are working inside a + repository (among other things), are now uniformly available to Git + subcommand implementations, and Git avoids attempting to touch + references when we are not in a repository. + + * The command line argument parser for "receive-pack" has been + rewritten to use parse-options. + + * A major part of "git submodule update" has been ported to C to take + advantage of the recently added framework to run download tasks in + parallel. Other updates to "git submodule" that move pieces of + logic to C continues. + + * Rename bunch of tests on "git clone" for better organization. + + * The tests that involve running httpd leaked the system-wide + configuration in /etc/gitconfig to the tested environment. + + * Build updates for MSVC. + + * The repository set-up sequence has been streamlined (the biggest + change is that there is no longer git_config_early()), so that we + do not attempt to look into refs/* when we know we do not have a + Git repository. + + * Code restructuring around the "refs" API to prepare for pluggable + refs backends. + + * Sources to many test helper binaries and the generated helpers + have been moved to t/helper/ subdirectory to reduce clutter at the + top level of the tree. + + * Unify internal logic between "git tag -v" and "git verify-tag" + commands by making one directly call into the other. + + * "merge-recursive" strategy incorrectly checked if a path that is + involved in its internal merge exists in the working tree. + + * The test scripts for "git p4" (but not "git p4" implementation + itself) has been updated so that they would work even on a system + where the installed version of Python is python 3. + + * As nobody maintains our in-tree git.spec.in and distros use their + own spec file, we stopped pretending that we support "make rpm". + + * Move from "unsigned char[20]" to "struct object_id" continues. + + * The code for warning_errno/die_errno has been refactored and a new + error_errno() reporting helper is introduced. + (merge 1da045f nd/error-errno later to maint). + + * Running tests with '-x' option to trace the individual command + executions is a useful way to debug test scripts, but some tests + that capture the standard error stream and check what the command + said can be broken with the trace output mixed in. When running + our tests under "bash", however, we can redirect the trace output + to another file descriptor to keep the standard error of programs + being tested intact. + + * t0040 had too many unnecessary repetitions in its test data. Teach + test-parse-options program so that a caller can tell what it + expects in its output, so that these repetitions can be cleaned up. + + * Add perf test for "rebase -i". + + * Common mistakes when writing gitlink: in our documentation are + found by "make check-docs". + + * t9xxx series has been updated primarily for readability, while + fixing small bugs in it. A few scripted Porcelain commands have + also been updated to fix possible bugs around their use of + "test -z" and "test -n". + + * CI test was taught to run git-svn tests. + + * "git cat-file --batch-all" has been sped up, by taking advantage + of the fact that it does not have to read a list of objects, in two + ways. + + * test updates to make it more readable and maintainable. + (merge e6273f4 es/t1500-modernize later to maint). + + * "make DEVELOPER=1" worked as expected; setting DEVELOPER=1 in + config.mak didn't. + (merge 51dd3e8 mm/makefile-developer-can-be-in-config-mak later to maint). + + * The way how "submodule--helper list" signals unmatch error to its + callers has been updated. + + * A bash-ism "local" has been removed from "git submodule" scripted + Porcelain. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v2.8 +---------------- + +Unless otherwise noted, all the fixes since v2.8 in the maintenance +track are contained in this release (see the maintenance releases' +notes for details). + + * "git config --get-urlmatch", unlike other variants of the "git + config --get" family, did not signal error with its exit status + when there was no matching configuration. + + * The "--local-env-vars" and "--resolve-git-dir" options of "git + rev-parse" failed to work outside a repository when the command's + option parsing was rewritten in 1.8.5 era. + + * "git index-pack --keep[=<msg>] pack-$name.pack" simply did not work. + + * Fetching of history by naming a commit object name directly didn't + work across remote-curl transport. + + * A small memory leak in an error codepath has been plugged in xdiff + code. + + * strbuf_getwholeline() did not NUL-terminate the buffer on certain + corner cases in its error codepath. + + * "git mergetool" did not work well with conflicts that both sides + deleted. + + * "git send-email" had trouble parsing alias file in mailrc format + when lines in it had trailing whitespaces on them. + + * When "git merge --squash" stopped due to conflict, the concluding + "git commit" failed to read in the SQUASH_MSG that shows the log + messages from all the squashed commits. + + * "git merge FETCH_HEAD" dereferenced NULL pointer when merging + nothing into an unborn history (which is arguably unusual usage, + which perhaps was the reason why nobody noticed it). + + * When "git worktree" feature is in use, "git branch -d" allowed + deletion of a branch that is checked out in another worktree, + which was wrong. + + * When "git worktree" feature is in use, "git branch -m" renamed a + branch that is checked out in another worktree without adjusting + the HEAD symbolic ref for the worktree. + + * "git diff -M" used to work better when two originally identical + files A and B got renamed to X/A and X/B by pairing A to X/A and B + to X/B, but this was broken in the 2.0 timeframe. + + * "git send-pack --all <there>" was broken when its command line + option parsing was written in the 2.6 timeframe. + + * "git format-patch --help" showed `-s` and `--no-patch` as if these + are valid options to the command. We already hide `--patch` option + from the documentation, because format-patch is about showing the + diff, and the documentation now hides these options as well. + + * When running "git blame $path" with unnormalized data in the index + for the path, the data in the working tree was blamed, even though + "git add" would not have changed what is already in the index, due + to "safe crlf" that disables the line-end conversion. It has been + corrected. + + * A change back in version 2.7 to "git branch" broke display of a + symbolic ref in a non-standard place in the refs/ hierarchy (we + expect symbolic refs to appear in refs/remotes/*/HEAD to point at + the primary branch the remote has, and as .git/HEAD to point at the + branch we locally checked out). + + * A partial rewrite of "git submodule" in the 2.7 timeframe changed + the way the gitdir: pointer in the submodules point at the real + repository location to use absolute paths by accident. This has + been corrected. + + * "git commit" misbehaved in a few minor ways when an empty message + is given via -m '', all of which has been corrected. + + * Support for CRAM-MD5 authentication method in "git imap-send" did + not work well. + + * Upcoming OpenSSL 1.1.0 will break compilation by updating a few API + elements we use in imap-send, which has been adjusted for the change. + + * The socks5:// proxy support added back in 2.6.4 days was not aware + that socks5h:// proxies behave differently from socks5:// proxies. + + * "git config" had a codepath that tried to pass a NULL to + printf("%s"), which nobody seems to have noticed. + + * On Cygwin, object creation uses the "create a temporary and then + rename it to the final name" pattern, not "create a temporary, + hardlink it to the final name and then unlink the temporary" + pattern. + + This is necessary to use Git on Windows shared directories, and is + already enabled for the MinGW and plain Windows builds. It also + has been used in Cygwin packaged versions of Git for quite a while. + See http://thread.gmane.org/gmane.comp.version-control.git/291853 + + * "merge-octopus" strategy did not ensure that the index is clean + when merge begins. + + * When "git merge" notices that the merge can be resolved purely at + the tree level (without having to merge blobs) and the resulting + tree happens to already exist in the object store, it forgot to + update the index, which left an inconsistent state that would + break later operations. + + * "git submodule" reports the paths of submodules the command + recurses into, but these paths were incorrectly reported when + the command was not run from the root level of the superproject. + + * The "user.useConfigOnly" configuration variable makes it an error + if users do not explicitly set user.name and user.email. However, + its check was not done early enough and allowed another error to + trigger, reporting that the default value we guessed from the + system setting was unusable. This was a suboptimal end-user + experience as we want the users to set user.name/user.email without + relying on the auto-detection at all. + + * "git mv old new" did not adjust the path for a submodule that lives + as a subdirectory inside old/ directory correctly. + + * "git replace -e" did not honour "core.editor" configuration. + + * "git push" from a corrupt repository that attempts to push a large + number of refs deadlocked; the thread to relay rejection notices + for these ref updates blocked on writing them to the main thread, + after the main thread at the receiving end notices that the push + failed and decides not to read these notices and return a failure. + + * mmap emulation on Windows has been optimized and work better without + consuming paging store when not needed. + + * A question by "git send-email" to ask the identity of the sender + has been updated. + + * UI consistency improvements for "git mergetool". + + * "git rebase -m" could be asked to rebase an entire branch starting + from the root, but failed by assuming that there always is a parent + commit to the first commit on the branch. + + * Fix a broken "p4 lfs" test. + + * Recent update to Git LFS broke "git p4" by changing the output from + its "lfs pointer" subcommand. + + * "git fetch" test t5510 was flaky while running a (forced) automagic + garbage collection. + + * Documentation updates to help contributors setting up Travis CI + test for their patches. + + * Some multi-byte encoding can have a backslash byte as a later part + of one letter, which would confuse "highlight" filter used in + gitweb. + + * "git commit-tree" plumbing command required the user to always sign + its result when the user sets the commit.gpgsign configuration + variable, which was an ancient mistake. Rework "git rebase" that + relied on this mistake so that it reads commit.gpgsign and pass (or + not pass) the -S option to "git commit-tree" to keep the end-user + expectation the same, while teaching "git commit-tree" to ignore + the configuration variable. This will stop requiring the users to + sign commit objects used internally as an implementation detail of + "git stash". + + * "http.cookieFile" configuration variable clearly wants a pathname, + but we forgot to treat it as such by e.g. applying tilde expansion. + + * Consolidate description of tilde-expansion that is done to + configuration variables that take pathname to a single place. + + * Correct faulty recommendation to use "git submodule deinit ." when + de-initialising all submodules, which would result in a strange + error message in a pathological corner case. + + * Many 'linkgit:<git documentation page>' references were broken, + which are all fixed with this. + + * "git rerere" can get confused by conflict markers deliberately left + by the inner merge step, because they are indistinguishable from + the real conflict markers left by the outermost merge which are + what the end user and "rerere" need to look at. This was fixed by + making the conflict markers left by the inner merges a bit longer. + (merge 0f9fd5c jc/ll-merge-internal later to maint). + + * CI test was taught to build documentation pages. + + * "git fsck" learned to catch NUL byte in a commit object as + potential error and warn. + + * Portability enhancement for "rebase -i" to help platforms whose + shell does not like "for i in <empty>" (which is not POSIX-kosher). + + * On Windows, .git and optionally any files whose name starts with a + dot are now marked as hidden, with a core.hideDotFiles knob to + customize this behaviour. + + * Documentation for "git merge --verify-signatures" has been updated + to clarify that the signature of only the commit at the tip is + verified. Also the phrasing used for signature and key validity is + adjusted to align with that used by OpenPGP. + + * A couple of bugs around core.autocrlf have been fixed. + + * Many commands normalize command line arguments from NFD to NFC + variant of UTF-8 on OSX, but commands in the "diff" family did + not, causing "git diff $path" to complain that no such path is + known to Git. They have been taught to do the normalization. + + * "git difftool" learned to handle unmerged paths correctly in + dir-diff mode. + + * The "are we talking with TTY, doing an interactive session?" + detection has been updated to work better for "Git for Windows". + + * We forgot to add "git log --decorate=auto" to documentation when we + added the feature back in v2.1.0 timeframe. + (merge 462cbb4 rj/log-decorate-auto later to maint). + + * "git fast-import --export-marks" would overwrite the existing marks + file even when it makes a dump from its custom die routine. + Prevent it from doing so when we have an import-marks file but + haven't finished reading it. + (merge f4beed6 fc/fast-import-broken-marks-file later to maint). + + * "git rebase -i", after it fails to auto-resolve the conflict, had + an unnecessary call to "git rerere" from its very early days, which + was spotted recently; the call has been removed. + (merge 7063693 js/rebase-i-dedup-call-to-rerere later to maint). + + * Other minor clean-ups and documentation updates + (merge cd82b7a pa/cherry-pick-doc-typo later to maint). + (merge 2bb73ae rs/patch-id-use-skip-prefix later to maint). + (merge aa20cbc rs/apply-name-terminate later to maint). + (merge fe17fc0 jc/t2300-setup later to maint). + (merge e256eec jk/shell-portability later to maint). diff --git a/Documentation/RelNotes/2.9.1.txt b/Documentation/RelNotes/2.9.1.txt new file mode 100644 index 0000000..3383940 --- /dev/null +++ b/Documentation/RelNotes/2.9.1.txt @@ -0,0 +1,117 @@ +Git v2.9.1 Release Notes +======================== + +Fixes since v2.9 +---------------- + + * When "git daemon" is run without --[init-]timeout specified, a + connection from a client that silently goes offline can hang around + for a long time, wasting resources. The socket-level KEEPALIVE has + been enabled to allow the OS to notice such failed connections. + + * The commands in `git log` family take %C(auto) in a custom format + string. This unconditionally turned the color on, ignoring + --no-color or with --color=auto when the output is not connected to + a tty; this was corrected to make the format truly behave as + "auto". + + * "git rev-list --count" whose walk-length is limited with "-n" + option did not work well with the counting optimized to look at the + bitmap index. + + * "git show -W" (extend hunks to cover the entire function, delimited + by lines that match the "funcname" pattern) used to show the entire + file when a change added an entire function at the end of the file, + which has been fixed. + + * The documentation set has been updated so that literal commands, + configuration variables and environment variables are consistently + typeset in fixed-width font and bold in manpages. + + * "git svn propset" subcommand that was added in 2.3 days is + documented now. + + * The documentation tries to consistently spell "GPG"; when + referring to the specific program name, "gpg" is used. + + * "git reflog" stopped upon seeing an entry that denotes a branch + creation event (aka "unborn"), which made it appear as if the + reflog was truncated. + + * The git-prompt scriptlet (in contrib/) was not friendly with those + who uses "set -u", which has been fixed. + + * A codepath that used alloca(3) to place an unbounded amount of data + on the stack has been updated to avoid doing so. + + * "git update-index --add --chmod=+x file" may be usable as an escape + hatch, but not a friendly thing to force for people who do need to + use it regularly. "git add --chmod=+x file" can be used instead. + + * Build improvements for gnome-keyring (in contrib/) + + * "git status" used to say "working directory" when it meant "working + tree". + + * Comments about misbehaving FreeBSD shells have been clarified with + the version number (9.x and before are broken, newer ones are OK). + + * "git cherry-pick A" worked on an unborn branch, but "git + cherry-pick A..B" didn't. + + * "git add -i/-p" learned to honor diff.compactionHeuristic + experimental knob, so that the user can work on the same hunk split + as "git diff" output. + + * "log --graph --format=" learned that "%>|(N)" specifies the width + relative to the terminal's left edge, not relative to the area to + draw text that is to the right of the ancestry-graph section. It + also now accepts negative N that means the column limit is relative + to the right border. + + * The ownership rule for the piece of memory that hold references to + be fetched in "git fetch" was screwy, which has been cleaned up. + + * "git bisect" makes an internal call to "git diff-tree" when + bisection finds the culprit, but this call did not initialize the + data structure to pass to the diff-tree API correctly. + + * Formats of the various data (and how to validate them) where we use + GPG signature have been documented. + + * Fix an unintended regression in v2.9 that breaks "clone --depth" + that recurses down to submodules by forcing the submodules to also + be cloned shallowly, which many server instances that host upstream + of the submodules are not prepared for. + + * Fix unnecessarily waste in the idiomatic use of ': ${VAR=default}' + to set the default value, without enclosing it in double quotes. + + * Some platform-specific code had non-ANSI strict declarations of C + functions that do not take any parameters, which has been + corrected. + + * The internal code used to show local timezone offset is not + prepared to handle timestamps beyond year 2100, and gave a + bogus offset value to the caller. Use a more benign looking + +0000 instead and let "git log" going in such a case, instead + of aborting. + + * One among four invocations of readlink(1) in our test suite has + been rewritten so that the test can run on systems without the + command (others are in valgrind test framework and t9802). + + * t/perf needs /usr/bin/time with GNU extension; the invocation of it + is updated to "gtime" on Darwin. + + * A bug, which caused "git p4" while running under verbose mode to + report paths that are omitted due to branch prefix incorrectly, has + been fixed; the command said "Ignoring file outside of prefix" for + paths that are _inside_. + + * The top level documentation "git help git" still pointed at the + documentation set hosted at now-defunct google-code repository. + Update it to point to https://git.github.io/htmldocs/git.html + instead. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.2.txt b/Documentation/RelNotes/2.9.2.txt new file mode 100644 index 0000000..2620003 --- /dev/null +++ b/Documentation/RelNotes/2.9.2.txt @@ -0,0 +1,13 @@ +Git v2.9.2 Release Notes +======================== + +Fixes since v2.9.1 +------------------ + + * A fix merged to v2.9.1 had a few tests that are not meant to be + run on platforms without 64-bit long, which caused unnecessary + test failures on them because we didn't detect the platform and + skip them. These tests are now skipped on platforms that they + are not applicable to. + +No other change is included in this update. diff --git a/Documentation/RelNotes/2.9.3.txt b/Documentation/RelNotes/2.9.3.txt new file mode 100644 index 0000000..695b86f --- /dev/null +++ b/Documentation/RelNotes/2.9.3.txt @@ -0,0 +1,170 @@ +Git v2.9.3 Release Notes +======================== + +Fixes since v2.9.2 +------------------ + + * A helper function that takes the contents of a commit object and + finds its subject line did not ignore leading blank lines, as is + commonly done by other codepaths. Make it ignore leading blank + lines to match. + + * Git does not know what the contents in the index should be for a + path added with "git add -N" yet, so "git grep --cached" should not + show hits (or show lack of hits, with -L) in such a path, but that + logic does not apply to "git grep", i.e. searching in the working + tree files. But we did so by mistake, which has been corrected. + + * "git rebase -i --autostash" did not restore the auto-stashed change + when the operation was aborted. + + * "git commit --amend --allow-empty-message -S" for a commit without + any message body could have misidentified where the header of the + commit object ends. + + * More mark-up updates to typeset strings that are expected to + literally typed by the end user in fixed-width font. + + * For a long time, we carried an in-code comment that said our + colored output would work only when we use fprintf/fputs on + Windows, which no longer is the case for the past few years. + + * "gc.autoPackLimit" when set to 1 should not trigger a repacking + when there is only one pack, but the code counted poorly and did + so. + + * One part of "git am" had an oddball helper function that called + stuff from outside "his" as opposed to calling what we have "ours", + which was not gender-neutral and also inconsistent with the rest of + the system where outside stuff is usuall called "theirs" in + contrast to "ours". + + * The test framework learned a new helper test_match_signal to + check an exit code from getting killed by an expected signal. + + * "git blame -M" missed a single line that was moved within the file. + + * Fix recently introduced codepaths that are involved in parallel + submodule operations, which gave up on reading too early, and + could have wasted CPU while attempting to write under a corner + case condition. + + * "git grep -i" has been taught to fold case in non-ascii locales + correctly. + + * A test that unconditionally used "mktemp" learned that the command + is not necessarily available everywhere. + + * "git blame file" allowed the lineage of lines in the uncommitted, + unadded contents of "file" to be inspected, but it refused when + "file" did not appear in the current commit. When "file" was + created by renaming an existing file (but the change has not been + committed), this restriction was unnecessarily tight. + + * "git add -N dir/file && git write-tree" produced an incorrect tree + when there are other paths in the same directory that sorts after + "file". + + * "git fetch http://user:pass@host/repo..." scrubbed the userinfo + part, but "git push" didn't. + + * An age old bug that caused "git diff --ignore-space-at-eol" + misbehave has been fixed. + + * "git notes merge" had a code to see if a path exists (and fails if + it does) and then open the path for writing (when it doesn't). + Replace it with open with O_EXCL. + + * "git pack-objects" and "git index-pack" mostly operate with off_t + when talking about the offset of objects in a packfile, but there + were a handful of places that used "unsigned long" to hold that + value, leading to an unintended truncation. + + * Recent update to "git daemon" tries to enable the socket-level + KEEPALIVE, but when it is spawned via inetd, the standard input + file descriptor may not necessarily be connected to a socket. + Suppress an ENOTSOCK error from setsockopt(). + + * Recent FreeBSD stopped making perl available at /usr/bin/perl; + switch the default the built-in path to /usr/local/bin/perl on not + too ancient FreeBSD releases. + + * "git status" learned to suggest "merge --abort" during a conflicted + merge, just like it already suggests "rebase --abort" during a + conflicted rebase. + + * The .c/.h sources are marked as such in our .gitattributes file so + that "git diff -W" and friends would work better. + + * Existing autoconf generated test for the need to link with pthread + library did not check all the functions from pthread libraries; + recent FreeBSD has some functions in libc but not others, and we + mistakenly thought linking with libc is enough when it is not. + + * Allow http daemon tests in Travis CI tests. + + * Users of the parse_options_concat() API function need to allocate + extra slots in advance and fill them with OPT_END() when they want + to decide the set of supported options dynamically, which makes the + code error-prone and hard to read. This has been corrected by tweaking + the API to allocate and return a new copy of "struct option" array. + + * The use of strbuf in "git rm" to build filename to remove was a bit + suboptimal, which has been fixed. + + * "git commit --help" said "--no-verify" is only about skipping the + pre-commit hook, and failed to say that it also skipped the + commit-msg hook. + + * "git merge" in Git v2.9 was taught to forbid merging an unrelated + lines of history by default, but that is exactly the kind of thing + the "--rejoin" mode of "git subtree" (in contrib/) wants to do. + "git subtree" has been taught to use the "--allow-unrelated-histories" + option to override the default. + + * The build procedure for "git persistent-https" helper (in contrib/) + has been updated so that it can be built with more recent versions + of Go. + + * There is an optimization used in "git diff $treeA $treeB" to borrow + an already checked-out copy in the working tree when it is known to + be the same as the blob being compared, expecting that open/mmap of + such a file is faster than reading it from the object store, which + involves inflating and applying delta. This however kicked in even + when the checked-out copy needs to go through the convert-to-git + conversion (including the clean filter), which defeats the whole + point of the optimization. The optimization has been disabled when + the conversion is necessary. + + * "git -c grep.patternType=extended log --basic-regexp" misbehaved + because the internal API to access the grep machinery was not + designed well. + + * Windows port was failing some tests in t4130, due to the lack of + inum in the returned values by its lstat(2) emulation. + + * The characters in the label shown for tags/refs for commits in + "gitweb" output are now properly escaped for proper HTML output. + + * FreeBSD can lie when asked mtime of a directory, which made the + untracked cache code to fall back to a slow-path, which in turn + caused tests in t7063 to fail because it wanted to verify the + behaviour of the fast-path. + + * Squelch compiler warnings for netmalloc (in compat/) library. + + * The API documentation for hashmap was unclear if hashmap_entry + can be safely discarded without any other consideration. State + that it is safe to do so. + + * Not-so-recent rewrite of "git am" that started making internal + calls into the commit machinery had an unintended regression, in + that no matter how many seconds it took to apply many patches, the + resulting committer timestamp for the resulting commits were all + the same. + + * "git difftool <paths>..." started in a subdirectory failed to + interpret the paths relative to that directory, which has been + fixed. + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/RelNotes/2.9.4.txt b/Documentation/RelNotes/2.9.4.txt new file mode 100644 index 0000000..01e8642 --- /dev/null +++ b/Documentation/RelNotes/2.9.4.txt @@ -0,0 +1,83 @@ +Git v2.9.4 Release Notes +======================== + +Fixes since v2.9.3 +------------------ + + * There are certain house-keeping tasks that need to be performed at + the very beginning of any Git program, and programs that are not + built-in commands had to do them exactly the same way as "git" + potty does. It was easy to make mistakes in one-off standalone + programs (like test helpers). A common "main()" function that + calls cmd_main() of individual program has been introduced to + make it harder to make mistakes. + + * "git merge" with renormalization did not work well with + merge-recursive, due to "safer crlf" conversion kicking in when it + shouldn't. + + * The reflog output format is documented better, and a new format + --date=unix to report the seconds-since-epoch (without timezone) + has been added. + + * "git push --force-with-lease" already had enough logic to allow + ensuring that such a push results in creation of a ref (i.e. the + receiving end did not have another push from sideways that would be + discarded by our force-pushing), but didn't expose this possibility + to the users. It does so now. + + * "import-tars" fast-import script (in contrib/) used to ignore a + hardlink target and replaced it with an empty file, which has been + corrected to record the same blob as the other file the hardlink is + shared with. + + * "git mv dir non-existing-dir/" did not work in some environments + the same way as existing mainstream platforms. The code now moves + "dir" to "non-existing-dir", without relying on rename("A", "B/") + that strips the trailing slash of '/'. + + * The "t/" hierarchy is prone to get an unusual pathname; "make test" + has been taught to make sure they do not contain paths that cannot + be checked out on Windows (and the mechanism can be reusable to + catch pathnames that are not portable to other platforms as need + arises). + + * When "git merge-recursive" works on history with many criss-cross + merges in "verbose" mode, the names the command assigns to the + virtual merge bases could have overwritten each other by unintended + reuse of the same piece of memory. + + * "git checkout --detach <branch>" used to give the same advice + message as that is issued when "git checkout <tag>" (or anything + that is not a branch name) is given, but asking with "--detach" is + an explicit enough sign that the user knows what is going on. The + advice message has been squelched in this case. + + * "git difftool" by default ignores the error exit from the backend + commands it spawns, because often they signal that they found + differences by exiting with a non-zero status code just like "diff" + does; the exit status codes 126 and above however are special in + that they are used to signal that the command is not executable, + does not exist, or killed by a signal. "git difftool" has been + taught to notice these exit status codes. + + * On Windows, help.browser configuration variable used to be ignored, + which has been corrected. + + * The "git -c var[=val] cmd" facility to append a configuration + variable definition at the end of the search order was described in + git(1) manual page, but not in git-config(1), which was more likely + place for people to look for when they ask "can I make a one-shot + override, and if so how?" + + * The tempfile (hence its user lockfile) API lets the caller to open + a file descriptor to a temporary file, write into it and then + finalize it by first closing the filehandle and then either + removing or renaming the temporary file. When the process spawns a + subprocess after obtaining the file descriptor, and if the + subprocess has not exited when the attempt to remove or rename is + made, the last step fails on Windows, because the subprocess has + the file descriptor still open. Open tempfile with O_CLOEXEC flag + to avoid this (on Windows, this is mapped to O_NOINHERIT). + +Also contains minor documentation updates and code clean-ups. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 98fc4cc..bc8ad00 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -61,23 +61,28 @@ Make sure that you have tests for the bug you are fixing. See t/README for guidance. When adding a new feature, make sure that you have new tests to show -the feature triggers the new behaviour when it should, and to show the -feature does not trigger when it shouldn't. Also make sure that the -test suite passes after your commit. Do not forget to update the -documentation to describe the updated behaviour. - -Speaking of the documentation, it is currently a liberal mixture of US -and UK English norms for spelling and grammar, which is somewhat -unfortunate. A huge patch that touches the files all over the place -only to correct the inconsistency is not welcome, though. Potential -clashes with other changes that can result from such a patch are not -worth it. We prefer to gradually reconcile the inconsistencies in -favor of US English, with small and easily digestible patches, as a -side effect of doing some other real work in the vicinity (e.g. -rewriting a paragraph for clarity, while turning en_UK spelling to -en_US). Obvious typographical fixes are much more welcomed ("teh -> -"the"), preferably submitted as independent patches separate from -other documentation changes. +the feature triggers the new behavior when it should, and to show the +feature does not trigger when it shouldn't. After any code change, make +sure that the entire test suite passes. + +If you have an account at GitHub (and you can get one for free to work +on open source projects), you can use their Travis CI integration to +test your changes on Linux, Mac (and hopefully soon Windows). See +GitHub-Travis CI hints section for details. + +Do not forget to update the documentation to describe the updated +behavior and make sure that the resulting documentation set formats +well. It is currently a liberal mixture of US and UK English norms for +spelling and grammar, which is somewhat unfortunate. A huge patch that +touches the files all over the place only to correct the inconsistency +is not welcome, though. Potential clashes with other changes that can +result from such a patch are not worth it. We prefer to gradually +reconcile the inconsistencies in favor of US English, with small and +easily digestible patches, as a side effect of doing some other real +work in the vicinity (e.g. rewriting a paragraph for clarity, while +turning en_UK spelling to en_US). Obvious typographical fixes are much +more welcomed ("teh -> "the"), preferably submitted as independent +patches separate from other documentation changes. Oh, another thing. We are picky about whitespaces. Make sure your changes do not trigger errors with the sample pre-commit hook shipped @@ -93,12 +98,17 @@ should skip the full stop. It is also conventional in most cases to prefix the first line with "area: " where the area is a filename or identifier for the general area of the code being modified, e.g. - . archive: ustar header checksum is computed unsigned - . git-cherry-pick.txt: clarify the use of revision range notation + . doc: clarify distinction between sign-off and pgp-signing + . githooks.txt: improve the intro section If in doubt which identifier to use, run "git log --no-merges" on the files you are modifying to see the current conventions. +It's customary to start the remainder of the first line after "area: " +with a lower-case letter. E.g. "doc: clarify...", not "doc: +Clarify...", or "githooks.txt: improve...", not "githooks.txt: +Improve...". + The body should provide a meaningful commit message, which: . explains the problem the change tries to solve, iow, what is wrong @@ -116,6 +126,17 @@ its behaviour. Try to make sure your explanation can be understood without external resources. Instead of giving a URL to a mailing list archive, summarize the relevant points of the discussion. +If you want to reference a previous commit in the history of a stable +branch, use the format "abbreviated sha1 (subject, date)", +with the subject enclosed in a pair of double-quotes, like this: + + Commit f86a374 ("pack-bitmap.c: fix a memleak", 2015-03-30) + noticed that ... + +The "Copy commit summary" command of gitk can be used to obtain this +format, or this invocation of "git show": + + git show -s --date=short --pretty='format:%h ("%s", %ad)' <commit> (3) Generate your patch using Git tools out of your commits. @@ -201,12 +222,11 @@ that it will be postponed. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME, that is OK. -Do not PGP sign your patch, at least for now. Most likely, your -maintainer or other people on the list would not have your PGP -key and would not bother obtaining it anyway. Your patch is not -judged by who you are; a good patch from an unknown origin has a -far better chance of being accepted than a patch from a known, -respected origin that is done poorly or does incorrect things. +Do not PGP sign your patch. Most likely, your maintainer or other people on the +list would not have your PGP key and would not bother obtaining it anyway. +Your patch is not judged by who you are; a good patch from an unknown origin +has a far better chance of being accepted than a patch from a known, respected +origin that is done poorly or does incorrect things. If you really really really really want to do a PGP signed patch, format it as "multipart/signed", not a text/plain message @@ -231,7 +251,7 @@ patch. *2* The mailing list: git@vger.kernel.org -(5) Sign your work +(5) Certify your work by adding your "Signed-off-by: " line To improve tracking of who did what, we've borrowed the "sign-off" procedure from the Linux kernel project on patches @@ -370,6 +390,47 @@ Know the status of your patch after submission entitled "What's cooking in git.git" and "What's in git.git" giving the status of various proposed changes. +-------------------------------------------------- +GitHub-Travis CI hints + +With an account at GitHub (you can get one for free to work on open +source projects), you can use Travis CI to test your changes on Linux, +Mac (and hopefully soon Windows). You can find a successful example +test build here: https://travis-ci.org/git/git/builds/120473209 + +Follow these steps for the initial setup: + + (1) Fork https://github.com/git/git to your GitHub account. + You can find detailed instructions how to fork here: + https://help.github.com/articles/fork-a-repo/ + + (2) Open the Travis CI website: https://travis-ci.org + + (3) Press the "Sign in with GitHub" button. + + (4) Grant Travis CI permissions to access your GitHub account. + You can find more information about the required permissions here: + https://docs.travis-ci.com/user/github-oauth-scopes + + (5) Open your Travis CI profile page: https://travis-ci.org/profile + + (6) Enable Travis CI builds for your Git fork. + +After the initial setup, Travis CI will run whenever you push new changes +to your fork of Git on GitHub. You can monitor the test state of all your +branches here: https://travis-ci.org/<Your GitHub handle>/git/branches + +If a branch did not pass all test cases then it is marked with a red +cross. In that case you can click on the failing Travis CI job and +scroll all the way down in the log. Find the line "<-- Click here to see +detailed test output!" and click on the triangle next to the log line +number to expand the detailed test output. Here is such a failing +example: https://travis-ci.org/git/git/jobs/122676187 + +Fix the problem and push your fix to your Git fork. This will trigger +a new Travis CI build to ensure all tests pass. + + ------------------------------------------------ MUA specific hints diff --git a/Documentation/asciidoctor-extensions.rb b/Documentation/asciidoctor-extensions.rb new file mode 100644 index 0000000..ec83b49 --- /dev/null +++ b/Documentation/asciidoctor-extensions.rb @@ -0,0 +1,28 @@ +require 'asciidoctor' +require 'asciidoctor/extensions' + +module Git + module Documentation + class LinkGitProcessor < Asciidoctor::Extensions::InlineMacroProcessor + use_dsl + + named :chrome + + def process(parent, target, attrs) + if parent.document.basebackend? 'html' + prefix = parent.document.attr('git-relative-html-prefix') + %(<a href="#{prefix}#{target}.html">#{target}(#{attrs[1]})</a>\n) + elsif parent.document.basebackend? 'docbook' + "<citerefentry>\n" \ + "<refentrytitle>#{target}</refentrytitle>" \ + "<manvolnum>#{attrs[1]}</manvolnum>\n" \ + "</citerefentry>\n" + end + end + end + end +end + +Asciidoctor::Extensions.register do + inline_macro Git::Documentation::LinkGitProcessor, :linkgit +end diff --git a/Documentation/blame-options.txt b/Documentation/blame-options.txt index 760eab7..dc41957 100644 --- a/Documentation/blame-options.txt +++ b/Documentation/blame-options.txt @@ -28,12 +28,13 @@ include::line-range-format.txt[] -S <revs-file>:: Use revisions from revs-file instead of calling linkgit:git-rev-list[1]. ---reverse:: +--reverse <rev>..<rev>:: Walk history forward instead of backward. Instead of showing the revision in which a line appeared, this shows the last revision in which a line has existed. This requires a range of revision like START..END where the path to blame exists in - START. + START. `git blame --reverse START` is taken as `git blame + --reverse START..HEAD` for convenience. -p:: --porcelain:: @@ -69,7 +70,14 @@ include::line-range-format.txt[] iso format is used. For supported values, see the discussion of the --date option at linkgit:git-log[1]. --M|<num>|:: +--[no-]progress:: + Progress status is reported on the standard error stream + by default when it is attached to a terminal. This flag + enables progress reporting even if not attached to a + terminal. Can't use `--progress` together with `--porcelain` + or `--incremental`. + +-M[<num>]:: Detect moved or copied lines within a file. When a commit moves or copies a block of lines (e.g. the original file has A and then B, and the commit changes it to B and then @@ -85,7 +93,7 @@ alphanumeric characters that Git must detect as moving/copying within a file for it to associate those lines with the parent commit. The default value is 20. --C|<num>|:: +-C[<num>]:: In addition to `-M`, detect lines moved or copied from other files that were modified in the same commit. This is useful when you reorganize your program and move code diff --git a/Documentation/cat-texi.perl b/Documentation/cat-texi.perl index 87437f8..14d2f83 100755 --- a/Documentation/cat-texi.perl +++ b/Documentation/cat-texi.perl @@ -1,9 +1,12 @@ #!/usr/bin/perl -w +use strict; +use warnings; + my @menu = (); my $output = $ARGV[0]; -open TMP, '>', "$output.tmp"; +open my $tmp, '>', "$output.tmp"; while (<STDIN>) { next if (/^\\input texinfo/../\@node Top/); @@ -11,13 +14,13 @@ while (<STDIN>) { if (s/^\@top (.*)/\@node $1,,,Top/) { push @menu, $1; } - s/\(\@pxref{\[(URLS|REMOTES)\]}\)//; + s/\(\@pxref\{\[(URLS|REMOTES)\]}\)//; s/\@anchor\{[^{}]*\}//g; - print TMP; + print $tmp $_; } -close TMP; +close $tmp; -printf '\input texinfo +print '\input texinfo @setfilename gitman.info @documentencoding UTF-8 @dircategory Development @@ -28,16 +31,16 @@ printf '\input texinfo @top Git Manual Pages @documentlanguage en @menu -', $menu[0]; +'; for (@menu) { print "* ${_}::\n"; } print "\@end menu\n"; -open TMP, '<', "$output.tmp"; -while (<TMP>) { +open $tmp, '<', "$output.tmp"; +while (<$tmp>) { print; } -close TMP; +close $tmp; print "\@bye\n"; unlink "$output.tmp"; diff --git a/Documentation/config.txt b/Documentation/config.txt index e3c8cfe..475e874 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -79,15 +79,69 @@ escape sequences) are invalid. Includes ~~~~~~~~ -You can include one config file from another by setting the special +You can include a config file from another by setting the special `include.path` variable to the name of the file to be included. The -included file is expanded immediately, as if its contents had been +variable takes a pathname as its value, and is subject to tilde +expansion. `include.path` can be given multiple times. + +The included file is expanded immediately, as if its contents had been found at the location of the include directive. If the value of the -`include.path` variable is a relative path, the path is considered to be -relative to the configuration file in which the include directive was -found. The value of `include.path` is subject to tilde expansion: `~/` -is expanded to the value of `$HOME`, and `~user/` to the specified -user's home directory. See below for examples. +`include.path` variable is a relative path, the path is considered to +be relative to the configuration file in which the include directive +was found. See below for examples. + +Conditional includes +~~~~~~~~~~~~~~~~~~~~ + +You can include a config file from another conditionally by setting a +`includeIf.<condition>.path` variable to the name of the file to be +included. The variable's value is treated the same way as +`include.path`. `includeIf.<condition>.path` can be given multiple times. + +The condition starts with a keyword followed by a colon and some data +whose format and meaning depends on the keyword. Supported keywords +are: + +`gitdir`:: + + The data that follows the keyword `gitdir:` is used as a glob + pattern. If the location of the .git directory matches the + pattern, the include condition is met. ++ +The .git location may be auto-discovered, or come from `$GIT_DIR` +environment variable. If the repository is auto discovered via a .git +file (e.g. from submodules, or a linked worktree), the .git location +would be the final location where the .git directory is, not where the +.git file is. ++ +The pattern can contain standard globbing wildcards and two additional +ones, `**/` and `/**`, that can match multiple path components. Please +refer to linkgit:gitignore[5] for details. For convenience: + + * If the pattern starts with `~/`, `~` will be substituted with the + content of the environment variable `HOME`. + + * If the pattern starts with `./`, it is replaced with the directory + containing the current config file. + + * If the pattern does not start with either `~/`, `./` or `/`, `**/` + will be automatically prepended. For example, the pattern `foo/bar` + becomes `**/foo/bar` and would match `/any/path/to/foo/bar`. + + * If the pattern ends with `/`, `**` will be automatically added. For + example, the pattern `foo/` becomes `foo/**`. In other words, it + matches "foo" and everything inside, recursively. + +`gitdir/i`:: + This is the same as `gitdir` except that matching is done + case-insensitively (e.g. on case-insensitive file sytems) + +A few more notes on matching via `gitdir` and `gitdir/i`: + + * Symlinks in `$GIT_DIR` are not resolved before matching. + + * Note that "../" is not special and will match literally, which is + unlikely what you want. Example ~~~~~~~ @@ -114,8 +168,19 @@ Example [include] path = /path/to/foo.inc ; include by absolute path path = foo ; expand "foo" relative to the current file - path = ~/foo ; expand "foo" in your $HOME directory + path = ~/foo ; expand "foo" in your `$HOME` directory + ; include if $GIT_DIR is /path/to/foo/.git + [includeIf "gitdir:/path/to/foo/.git"] + path = /path/to/foo.inc + + ; include for all repositories inside /path/to/group + [includeIf "gitdir:/path/to/group/"] + path = /path/to/foo.inc + + ; include for all repositories inside $HOME/to/group + [includeIf "gitdir:~/to/group/"] + path = /path/to/foo.inc Values ~~~~~~ @@ -137,7 +202,7 @@ boolean:: false;; Boolean false can be spelled as `no`, `off`, `false`, or `0`. + -When converting value to the canonical form using '--bool' type +When converting value to the canonical form using `--bool` type specifier; 'git config' will ensure that the output is "true" or "false" (spelled in lowercase). @@ -147,27 +212,44 @@ integer:: 1024", "by 1024x1024", etc. color:: - The value for a variables that takes a color is a list of - colors (at most two) and attributes (at most one), separated - by spaces. The colors accepted are `normal`, `black`, - `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and - `white`; the attributes are `bold`, `dim`, `ul`, `blink` and - `reverse`. The first color given is the foreground; the - second is the background. The position of the attribute, if - any, doesn't matter. Attributes may be turned off specifically - by prefixing them with `no` (e.g., `noreverse`, `noul`, etc). -+ -Colors (foreground and background) may also be given as numbers between -0 and 255; these use ANSI 256-color mode (but note that not all -terminals may support this). If your terminal supports it, you may also -specify 24-bit RGB values as hex, like `#ff0ab3`. -+ -The attributes are meant to be reset at the beginning of each item -in the colored output, so setting color.decorate.branch to `black` -will paint that branch name in a plain `black`, even if the previous -thing on the same output line (e.g. opening parenthesis before the -list of branch names in `log --decorate` output) is set to be -painted with `bold` or some other attribute. + The value for a variable that takes a color is a list of + colors (at most two, one for foreground and one for background) + and attributes (as many as you want), separated by spaces. ++ +The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`, +`blue`, `magenta`, `cyan` and `white`. The first color given is the +foreground; the second is the background. ++ +Colors may also be given as numbers between 0 and 255; these use ANSI +256-color mode (but note that not all terminals may support this). If +your terminal supports it, you may also specify 24-bit RGB values as +hex, like `#ff0ab3`. ++ +The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`, +`italic`, and `strike` (for crossed-out or "strikethrough" letters). +The position of any attributes with respect to the colors +(before, after, or in between), doesn't matter. Specific attributes may +be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`, +`no-ul`, etc). ++ +An empty color string produces no color effect at all. This can be used +to avoid coloring specific elements without disabling color entirely. ++ +For git's pre-defined color slots, the attributes are meant to be reset +at the beginning of each item in the colored output. So setting +`color.decorate.branch` to `black` will paint that branch name in a +plain `black`, even if the previous thing on the same output line (e.g. +opening parenthesis before the list of branch names in `log --decorate` +output) is set to be painted with `bold` or some other attribute. +However, custom log formats may do more complicated and layered +coloring, and the negated forms may be useful there. + +pathname:: + A variable that takes a pathname value can be given a + string that begins with "`~/`" or "`~user/`", and the usual + tilde expansion happens to such a string: `~/` + is expanded to the value of `$HOME`, and `~user/` to the + specified user's home directory. Variables @@ -269,6 +351,12 @@ See linkgit:git-update-index[1]. + The default is true (when core.filemode is not specified in the config file). +core.hideDotFiles:: + (Windows-only) If true, mark newly-created directories and files whose + name starts with a dot as hidden. If 'dotGitOnly', only the `.git/` + directory is hidden, but no other files starting with a dot. The + default mode is 'dotGitOnly'. + core.ignoreCase:: If true, this option enables various workarounds to enable Git to work better on filesystems that are not case sensitive, @@ -308,6 +396,10 @@ core.trustctime:: crawlers and some backup systems). See linkgit:git-update-index[1]. True by default. +core.splitIndex:: + If true, the split-index feature of the index will be used. + See linkgit:git-update-index[1]. False by default. + core.untrackedCache:: Determines what to do about the untracked cache feature of the index. It will be kept, if this variable is unset or set to @@ -324,22 +416,25 @@ core.checkStat:: all fields, including the sub-second part of mtime and ctime. core.quotePath:: - The commands that output paths (e.g. 'ls-files', - 'diff'), when not given the `-z` option, will quote - "unusual" characters in the pathname by enclosing the - pathname in a double-quote pair and with backslashes the - same way strings in C source code are quoted. If this - variable is set to false, the bytes higher than 0x80 are - not quoted but output as verbatim. Note that double - quote, backslash and control characters are always - quoted without `-z` regardless of the setting of this - variable. + Commands that output paths (e.g. 'ls-files', 'diff'), will + quote "unusual" characters in the pathname by enclosing the + pathname in double-quotes and escaping those characters with + backslashes in the same way C escapes control characters (e.g. + `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with + values larger than 0x80 (e.g. octal `\302\265` for "micro" in + UTF-8). If this variable is set to false, bytes higher than + 0x80 are not considered "unusual" any more. Double-quotes, + backslash and control characters are always escaped regardless + of the setting of this variable. A simple space character is + not considered "unusual". Many commands can output pathnames + completely verbatim using the `-z` option. The default value + is true. core.eol:: Sets the line ending type to use in the working directory for - files that have the `text` property set. Alternatives are - 'lf', 'crlf' and 'native', which uses the platform's native - line ending. The default value is `native`. See + files that have the `text` property set when core.autocrlf is false. + Alternatives are 'lf', 'crlf' and 'native', which uses the platform's + native line ending. The default value is `native`. See linkgit:gitattributes[5] for more information on end-of-line conversion. @@ -389,13 +484,11 @@ file with mixed line endings would be reported by the `core.safecrlf` mechanism. core.autocrlf:: - Setting this variable to "true" is almost the same as setting - the `text` attribute to "auto" on all files except that text - files are not guaranteed to be normalized: files that contain - `CRLF` in the repository will not be touched. Use this - setting if you want to have `CRLF` line endings in your - working directory even though the repository does not have - normalized line endings. This variable can be set to 'input', + Setting this variable to "true" is the same as setting + the `text` attribute to "auto" on all files and core.eol to "crlf". + Set to true if you want to have `CRLF` line endings in your + working directory and the repository has LF line endings. + This variable can be set to 'input', in which case no output conversion is performed. core.symlinks:: @@ -418,7 +511,7 @@ core.gitProxy:: may be set multiple times and is matched in the given order; the first match wins. + -Can be overridden by the 'GIT_PROXY_COMMAND' environment variable +Can be overridden by the `GIT_PROXY_COMMAND` environment variable (which always applies universally, without the special "for" handling). + @@ -427,6 +520,13 @@ specify that no proxy be used for a given domain pattern. This is useful for excluding servers inside a firewall from proxy use, while defaulting to a common proxy for external domains. +core.sshCommand:: + If this variable is set, `git fetch` and `git push` will + use the specified command instead of `ssh` when they need to + connect to a remote system. The command is in the same form as + the `GIT_SSH_COMMAND` environment variable and is overridden + when the environment variable is set. + core.ignoreStat:: If true, Git will avoid using lstat() calls to detect if files have changed by setting the "assume-unchanged" bit for those tracked files @@ -462,10 +562,10 @@ false), while all other repositories are assumed to be bare (bare core.worktree:: Set the path to the root of the working tree. - If GIT_COMMON_DIR environment variable is set, core.worktree + If `GIT_COMMON_DIR` environment variable is set, core.worktree is ignored and not used for determining the root of working tree. - This can be overridden by the GIT_WORK_TREE environment - variable and the '--work-tree' command-line option. + This can be overridden by the `GIT_WORK_TREE` environment + variable and the `--work-tree` command-line option. The value can be an absolute path or relative to the path to the .git directory, which is either specified by --git-dir or GIT_DIR, or automatically discovered. @@ -486,13 +586,15 @@ repository's usual working tree). core.logAllRefUpdates:: Enable the reflog. Updates to a ref <ref> is logged to the file - "$GIT_DIR/logs/<ref>", by appending the new and old + "`$GIT_DIR/logs/<ref>`", by appending the new and old SHA-1, the date/time and the reason of the update, but only when the file exists. If this configuration - variable is set to true, missing "$GIT_DIR/logs/<ref>" + variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`" file is automatically created for branch heads (i.e. under - refs/heads/), remote refs (i.e. under refs/remotes/), - note refs (i.e. under refs/notes/), and the symbolic ref HEAD. + `refs/heads/`), remote refs (i.e. under `refs/remotes/`), + note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`. + If it is set to `always`, then a missing reflog is automatically + created for any ref under `refs/`. + This information can be used to determine what commit was the tip of a branch "2 days ago". @@ -529,7 +631,7 @@ core.compression:: -1 is the zlib default. 0 means no compression, and 1..9 are various speed/size tradeoffs, 9 being slowest. If set, this provides a default to other compression variables, - such as 'core.looseCompression' and 'pack.compression'. + such as `core.looseCompression` and `pack.compression`. core.looseCompression:: An integer -1..9, indicating the compression level for objects that @@ -593,20 +695,19 @@ be delta compressed, but larger binary media files won't be. Common unit suffixes of 'k', 'm', or 'g' are supported. core.excludesFile:: - In addition to '.gitignore' (per-directory) and - '.git/info/exclude', Git looks into this file for patterns - of files which are not meant to be tracked. "`~/`" is expanded - to the value of `$HOME` and "`~user/`" to the specified user's - home directory. Its default value is $XDG_CONFIG_HOME/git/ignore. - If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore + Specifies the pathname to the file that contains patterns to + describe paths that are not meant to be tracked, in addition + to '.gitignore' (per-directory) and '.git/info/exclude'. + Defaults to `$XDG_CONFIG_HOME/git/ignore`. + If `$XDG_CONFIG_HOME` is either not set or empty, `$HOME/.config/git/ignore` is used instead. See linkgit:gitignore[5]. core.askPass:: Some commands (e.g. svn and http interfaces) that interactively ask for a password can be told to use an external program given - via the value of this variable. Can be overridden by the 'GIT_ASKPASS' + via the value of this variable. Can be overridden by the `GIT_ASKPASS` environment variable. If not set, fall back to the value of the - 'SSH_ASKPASS' environment variable or, failing that, a simple password + `SSH_ASKPASS` environment variable or, failing that, a simple password prompt. The external program shall be given a suitable prompt as command-line argument and write the password on its STDOUT. @@ -615,17 +716,34 @@ core.attributesFile:: '.git/info/attributes', Git looks into this file for attributes (see linkgit:gitattributes[5]). Path expansions are made the same way as for `core.excludesFile`. Its default value is - $XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not - set or empty, $HOME/.config/git/attributes is used instead. + `$XDG_CONFIG_HOME/git/attributes`. If `$XDG_CONFIG_HOME` is either not + set or empty, `$HOME/.config/git/attributes` is used instead. + +core.hooksPath:: + By default Git will look for your hooks in the + '$GIT_DIR/hooks' directory. Set this to different path, + e.g. '/etc/git/hooks', and Git will try to find your hooks in + that directory, e.g. '/etc/git/hooks/pre-receive' instead of + in '$GIT_DIR/hooks/pre-receive'. ++ +The path can be either absolute or relative. A relative path is +taken as relative to the directory where the hooks are run (see +the "DESCRIPTION" section of linkgit:githooks[5]). ++ +This configuration variable is useful in cases where you'd like to +centrally configure your Git hooks instead of configuring them on a +per-repository basis, or as a more flexible and centralized +alternative to having an `init.templateDir` where you've changed +default hooks. core.editor:: - Commands such as `commit` and `tag` that lets you edit - messages by launching an editor uses the value of this + Commands such as `commit` and `tag` that let you edit + messages by launching an editor use the value of this variable when it is set, and the environment variable `GIT_EDITOR` is not set. See linkgit:git-var[1]. core.commentChar:: - Commands such as `commit` and `tag` that lets you edit + Commands such as `commit` and `tag` that let you edit messages consider a line that begins with this character commented, and removes them after the editor returns (default '#'). @@ -732,22 +850,23 @@ core.notesRef:: notes should be printed. + This setting defaults to "refs/notes/commits", and it can be overridden by -the 'GIT_NOTES_REF' environment variable. See linkgit:git-notes[1]. +the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1]. core.sparseCheckout:: Enable "sparse checkout" feature. See section "Sparse checkout" in linkgit:git-read-tree[1] for more information. core.abbrev:: - Set the length object names are abbreviated to. If unspecified, - many commands abbreviate to 7 hexdigits, which may not be enough - for abbreviated object names to stay unique for sufficiently long - time. + Set the length object names are abbreviated to. If + unspecified or set to "auto", an appropriate value is + computed based on the approximate number of packed objects + in your repository, which hopefully is enough for + abbreviated object names to stay unique for some time. add.ignoreErrors:: add.ignore-errors (deprecated):: Tells 'git add' to continue adding files when some files cannot be - added due to indexing errors. Equivalent to the '--ignore-errors' + added due to indexing errors. Equivalent to the `--ignore-errors` option of linkgit:git-add[1]. `add.ignore-errors` is deprecated, as it does not follow the usual naming convention for configuration variables. @@ -768,14 +887,14 @@ it will be treated as a shell command. For example, defining "gitk --all --not ORIG_HEAD". Note that shell commands will be executed from the top-level directory of a repository, which may not necessarily be the current directory. -'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix' +`GIT_PREFIX` is set as returned by running 'git rev-parse --show-prefix' from the original current directory. See linkgit:git-rev-parse[1]. am.keepcr:: If true, git-am will call git-mailsplit for patches in mbox format - with parameter '--keep-cr'. In this case git-mailsplit will + with parameter `--keep-cr`. In this case git-mailsplit will not remove `\r` from lines ending with `\r\n`. Can be overridden - by giving '--no-keep-cr' from the command line. + by giving `--no-keep-cr` from the command line. See linkgit:git-am[1], linkgit:git-mailsplit[1]. am.threeWay:: @@ -788,7 +907,7 @@ am.threeWay:: apply.ignoreWhitespace:: When set to 'change', tells 'git apply' to ignore changes in - whitespace, in the same way as the '--ignore-space-change' + whitespace, in the same way as the `--ignore-space-change` option. When set to one of: no, none, never, false tells 'git apply' to respect all whitespace differences. @@ -796,7 +915,7 @@ apply.ignoreWhitespace:: apply.whitespace:: Tells 'git apply' how to handle whitespaces, in the same way - as the '--whitespace' option. See linkgit:git-apply[1]. + as the `--whitespace` option. See linkgit:git-apply[1]. branch.autoSetupMerge:: Tells 'git branch' and 'git checkout' to set up new branches @@ -879,6 +998,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -896,7 +1017,7 @@ browser.<tool>.cmd:: browser.<tool>.path:: Override the path for the given tool that may be used to - browse HTML help (see '-w' option in linkgit:git-help[1]) or a + browse HTML help (see `-w` option in linkgit:git-help[1]) or a working repository in gitweb (see linkgit:git-instaweb[1]). clean.requireForce:: @@ -907,7 +1028,8 @@ color.branch:: A boolean to enable/disable color in the output of linkgit:git-branch[1]. May be set to `always`, `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. Defaults to false. + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). color.branch.<slot>:: Use customized color for branch coloration. `<slot>` is one of @@ -922,7 +1044,8 @@ color.diff:: linkgit:git-log[1], and linkgit:git-show[1] will use color for all patches. If it is set to `true` or `auto`, those commands will only use color when output is to the terminal. - Defaults to false. + If unset, then the value of `color.ui` is used (`auto` by + default). + This does not affect linkgit:git-format-patch[1] or the 'git-diff-{asterisk}' plumbing commands. Can be overridden on the @@ -945,7 +1068,8 @@ color.decorate.<slot>:: color.grep:: When set to `always`, always highlight matches. When `false` (or `never`), never. When set to `true` or `auto`, use color only - when the output is written to the terminal. Defaults to `false`. + when the output is written to the terminal. If unset, then the + value of `color.ui` is used (`auto` by default). color.grep.<slot>:: Use customized color for grep colorization. `<slot>` specifies which @@ -978,7 +1102,8 @@ color.interactive:: and displays (such as those used by "git-add --interactive" and "git-clean --interactive"). When false (or `never`), never. When set to `true` or `auto`, use colors only when the output is - to the terminal. Defaults to false. + to the terminal. If unset, then the value of `color.ui` is + used (`auto` by default). color.interactive.<slot>:: Use customized color for 'git add --interactive' and 'git clean @@ -994,13 +1119,15 @@ color.showBranch:: A boolean to enable/disable color in the output of linkgit:git-show-branch[1]. May be set to `always`, `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. Defaults to false. + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). color.status:: A boolean to enable/disable color in the output of linkgit:git-status[1]. May be set to `always`, `false` (or `never`) or `auto` (or `true`), in which case colors are used - only when the output is to a terminal. Defaults to false. + only when the output is to a terminal. If unset, then the + value of `color.ui` is used (`auto` by default). color.status.<slot>:: Use customized color for status colorization. `<slot>` is @@ -1104,15 +1231,19 @@ commit.status:: message. Defaults to true. commit.template:: - Specify a file to use as the template for new commit messages. - "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the - specified user's home directory. + Specify the pathname of a file to use as the template for + new commit messages. + +commit.verbose:: + A boolean or int to specify the level of verbose with `git commit`. + See linkgit:git-commit[1]. credential.helper:: Specify an external helper to be called when a username or password credential is needed; the helper may consult external - storage to avoid prompting the user for the credentials. See - linkgit:gitcredentials[7] for details. + storage to avoid prompting the user for the credentials. Note + that multiple helpers may be defined. See linkgit:gitcredentials[7] + for details. credential.useHttpPath:: When acquiring credentials, consider the "path" component of an http @@ -1151,6 +1282,15 @@ difftool.<tool>.cmd:: difftool.prompt:: Prompt before each invocation of the diff tool. +fastimport.unpackLimit:: + If the number of objects imported by linkgit:git-fast-import[1] + is below this limit, then the objects will be unpacked into + loose object files. However if the number of imported objects + equals or exceeds this limit then the pack will be stored as a + pack. Storing the pack from a fast-import can make the import + operation complete faster, especially on slow filesystems. If + not set, the value of `transfer.unpackLimit` is used instead. + fetch.recurseSubmodules:: This option can be either set to a boolean value or to 'on-demand'. Setting it to a boolean changes the behavior of fetch and pull to @@ -1182,6 +1322,11 @@ fetch.prune:: If true, fetch will automatically behave as if the `--prune` option was given on the command line. See also `remote.<name>.prune`. +fetch.output:: + Control how ref update status is printed. Valid values are + `full` and `compact`. Default value is `full`. See section + OUTPUT in linkgit:git-fetch[1] for detail. + format.attach:: Enable multipart/mixed attachments as the default for 'format-patch'. The value can also be a double quoted string @@ -1189,6 +1334,16 @@ format.attach:: value as the boundary. See the --attach option in linkgit:git-format-patch[1]. +format.from:: + Provides the default value for the `--from` option to format-patch. + Accepts a boolean value, or a name and email address. If false, + format-patch defaults to `--no-from`, using commit authors directly in + the "From:" field of patch mails. If true, format-patch defaults to + `--from`, using your committer identity in the "From:" field of patch + mails and including a "From:" field in the body of the patch mail if + different. If set to a non-boolean value, format-patch uses that + value instead of your committer identity. Defaults to false. + format.numbered:: A boolean which can enable or disable sequence numbers in patch subjects. It defaults to "auto" which enables it only if there @@ -1252,6 +1407,14 @@ format.coverLetter:: format-patch is invoked, but in addition can be set to "auto", to generate a cover-letter only when there's more than one patch. +format.outputDirectory:: + Set a custom directory to store the resulting files instead of the + current working directory. + +format.useAutoBase:: + A boolean value which lets you enable the `--base=auto` option of + format-patch by default. + filter.<driver>.clean:: The command which is used to convert the content of a worktree file to a blob upon checkin. See linkgit:gitattributes[5] for @@ -1284,7 +1447,7 @@ fsck.skipList:: gc.aggressiveDepth:: The depth parameter used in the delta compression algorithm used by 'git gc --aggressive'. This defaults - to 250. + to 50. gc.aggressiveWindow:: The window size parameter used in the delta compression @@ -1308,6 +1471,12 @@ gc.autoDetach:: Make `git gc --auto` return immediately and run in background if the system supports it. Default is true. +gc.logExpiry:: + If the file gc.log exists, then `git gc --auto` won't run + unless that file is more than 'gc.logExpiry' old. Default is + "1.day". See `gc.pruneExpire` for more ways to specify its + value. + gc.packRefs:: Running `git pack-refs` in a repository renders it unclonable by Git versions prior to 1.5.1.2 over dumb @@ -1321,14 +1490,16 @@ gc.pruneExpire:: Override the grace period with this config variable. The value "now" may be used to disable this grace period and always prune unreachable objects immediately, or "never" may be used to - suppress pruning. + suppress pruning. This feature helps prevent corruption when + 'git gc' runs concurrently with another process writing to the + repository; see the "NOTES" section of linkgit:git-gc[1]. gc.worktreePruneExpire:: When 'git gc' is run, it calls 'git worktree prune --expire 3.months.ago'. This config variable can be used to set a different grace period. The value "now" may be used to disable the grace - period and prune $GIT_DIR/worktrees immediately, or "never" + period and prune `$GIT_DIR/worktrees` immediately, or "never" may be used to suppress pruning. gc.reflogExpire:: @@ -1374,24 +1545,24 @@ gitcvs.logFile:: gitcvs.usecrlfattr:: If true, the server will look up the end-of-line conversion - attributes for files to determine the '-k' modes to use. If + attributes for files to determine the `-k` modes to use. If the attributes force Git to treat a file as text, - the '-k' mode will be left blank so CVS clients will + the `-k` mode will be left blank so CVS clients will treat it as text. If they suppress text conversion, the file will be set with '-kb' mode, which suppresses any newline munging the client might otherwise do. If the attributes do not allow - the file type to be determined, then 'gitcvs.allBinary' is + the file type to be determined, then `gitcvs.allBinary` is used. See linkgit:gitattributes[5]. gitcvs.allBinary:: - This is used if 'gitcvs.usecrlfattr' does not resolve + This is used if `gitcvs.usecrlfattr` does not resolve the correct '-kb' mode to use. If true, all unresolved files are sent to the client in mode '-kb'. This causes the client to treat them as binary files, which suppresses any newline munging it otherwise might do. Alternatively, if it is set to "guess", then the contents of the file are examined to decide if - it is binary, similar to 'core.autocrlf'. + it is binary, similar to `core.autocrlf`. gitcvs.dbName:: Database used by git-cvsserver to cache revision information @@ -1410,7 +1581,7 @@ gitcvs.dbDriver:: See linkgit:git-cvsserver[1]. gitcvs.dbUser, gitcvs.dbPass:: - Database user and password. Only useful if setting 'gitcvs.dbDriver', + Database user and password. Only useful if setting `gitcvs.dbDriver`, since SQLite has no concept of database users and/or passwords. 'gitcvs.dbUser' supports variable substitution (see linkgit:git-cvsserver[1] for details). @@ -1422,8 +1593,8 @@ gitcvs.dbTableNamePrefix:: linkgit:git-cvsserver[1] for details). Any non-alphabetic characters will be replaced with underscores. -All gitcvs variables except for 'gitcvs.usecrlfattr' and -'gitcvs.allBinary' can also be specified as +All gitcvs variables except for `gitcvs.usecrlfattr` and +`gitcvs.allBinary` can also be specified as 'gitcvs.<access_method>.<varname>' (where 'access_method' is one of "ext" and "pserver") to make them apply only for the given access method. @@ -1446,27 +1617,35 @@ gitweb.snapshot:: See linkgit:gitweb.conf[5] for description. grep.lineNumber:: - If set to true, enable '-n' option by default. + If set to true, enable `-n` option by default. grep.patternType:: Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', - '--fixed-strings', or '--perl-regexp' option accordingly, while the + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the value 'default' will return to the default matching behavior. grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. + See `grep.threads` in linkgit:git-grep[1] for more information. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. + gpg.program:: - Use this custom program instead of "gpg" found on $PATH when + Use this custom program instead of "`gpg`" found on `$PATH` when making or verifying a PGP signature. The program must support the same command-line interface as GPG, namely, to verify a detached - signature, "gpg --verify $file - <$signature" is run, and the + signature, "`gpg --verify $file - <$signature`" is run, and the program is expected to signal a good signature by exiting with code 0, and to generate an ASCII-armored detached signature, the - standard input of "gpg -bsau $key" is fed with the contents to be + standard input of "`gpg -bsau $key`" is fed with the contents to be signed, and the program is expected to send the result to its standard output. @@ -1479,7 +1658,7 @@ gui.diffContext:: made by the linkgit:git-gui[1]. The default is "5". gui.displayUntracked:: - Determines if linkgit::git-gui[1] shows untracked files + Determines if linkgit:git-gui[1] shows untracked files in the file list. The default is "true". gui.encoding:: @@ -1533,7 +1712,7 @@ guitool.<name>.cmd:: of the linkgit:git-gui[1] `Tools` menu is invoked. This option is mandatory for every tool. The command is executed from the root of the working directory, and in the environment it receives the name of - the tool as 'GIT_GUITOOL', the name of the currently selected file as + the tool as `GIT_GUITOOL`, the name of the currently selected file as 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if the head is detached, 'CUR_BRANCH' is empty). @@ -1554,7 +1733,7 @@ guitool.<name>.confirm:: guitool.<name>.argPrompt:: Request a string argument from the user, and pass it to the tool - through the 'ARGS' environment variable. Since requesting an + through the `ARGS` environment variable. Since requesting an argument implies confirmation, the 'confirm' option has no effect if this is enabled. If the option is set to 'true', 'yes', or '1', the dialog uses a built-in generic prompt; otherwise the exact @@ -1562,7 +1741,7 @@ guitool.<name>.argPrompt:: guitool.<name>.revPrompt:: Request a single valid revision from the user, and set the - 'REVISION' environment variable. In other aspects this option + `REVISION` environment variable. In other aspects this option is similar to 'argPrompt', and can be used together with it. guitool.<name>.revUnmerged:: @@ -1605,16 +1784,68 @@ help.htmlPath:: http.proxy:: Override the HTTP proxy, normally configured using the 'http_proxy', - 'https_proxy', and 'all_proxy' environment variables (see - `curl(1)`). This can be overridden on a per-remote basis; see - remote.<name>.proxy + 'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In + addition to the syntax understood by curl, it is possible to specify a + proxy string with a user name but no password, in which case git will + attempt to acquire one in the same way it does for other credentials. See + linkgit:gitcredentials[7] for more information. The syntax thus is + '[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden + on a per-remote basis; see remote.<name>.proxy + +http.proxyAuthMethod:: + Set the method with which to authenticate against the HTTP proxy. This + only takes effect if the configured proxy string contains a user name part + (i.e. is of the form 'user@host' or 'user@host:port'). This can be + overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`. + Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment + variable. Possible values are: ++ +-- +* `anyauth` - Automatically pick a suitable authentication method. It is + assumed that the proxy answers an unauthenticated request with a 407 + status code and one or more Proxy-authenticate headers with supported + authentication methods. This is the default. +* `basic` - HTTP Basic authentication +* `digest` - HTTP Digest authentication; this prevents the password from being + transmitted to the proxy in clear text +* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option + of `curl(1)`) +* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`) +-- + +http.emptyAuth:: + Attempt authentication without seeking a username or password. This + can be used to attempt GSS-Negotiate authentication without specifying + a username in the URL, as libcurl normally requires a username for + authentication. + +http.delegation:: + Control GSSAPI credential delegation. The delegation is disabled + by default in libcurl since version 7.21.7. Set parameter to tell + the server what it is allowed to delegate when it comes to user + credentials. Used with GSS/kerberos. Possible values are: ++ +-- +* `none` - Don't allow any delegation. +* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the + Kerberos service ticket, which is a matter of realm policy. +* `always` - Unconditionally allow the server to delegate. +-- + + +http.extraHeader:: + Pass an additional HTTP header when communicating with a server. If + more than one such entry exists, all of them are added as extra + headers. To allow overriding the settings inherited from the system + config, an empty value will reset the extra headers to the empty list. http.cookieFile:: - File containing previously stored cookie lines which should be used + The pathname of a file containing previously stored cookie lines, + which should be used in the Git http session, if they match the server. The file format of the file to read cookies from should be plain HTTP headers or - the Netscape/Mozilla cookie file format (see linkgit:curl[1]). - NOTE that the file specified with http.cookieFile is only used as + the Netscape/Mozilla cookie file format (see `curl(1)`). + NOTE that the file specified with http.cookieFile is used only as input unless http.saveCookies is set. http.saveCookies:: @@ -1639,9 +1870,9 @@ http.sslVersion:: - tlsv1.2 + -Can be overridden by the 'GIT_SSL_VERSION' environment variable. +Can be overridden by the `GIT_SSL_VERSION` environment variable. To force git to use libcurl's default ssl version and ignore any -explicit http.sslversion option, set 'GIT_SSL_VERSION' to the +explicit http.sslversion option, set `GIT_SSL_VERSION` to the empty string. http.sslCipherList:: @@ -1652,41 +1883,49 @@ http.sslCipherList:: option; see the libcurl documentation for more details on the format of this list. + -Can be overridden by the 'GIT_SSL_CIPHER_LIST' environment variable. +Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable. To force git to use libcurl's default cipher list and ignore any -explicit http.sslCipherList option, set 'GIT_SSL_CIPHER_LIST' to the +explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the empty string. http.sslVerify:: Whether to verify the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment + over HTTPS. Can be overridden by the `GIT_SSL_NO_VERIFY` environment variable. http.sslCert:: File containing the SSL certificate when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment + over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment variable. http.sslKey:: File containing the SSL private key when fetching or pushing - over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment + over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment variable. http.sslCertPasswordProtected:: Enable Git's password prompt for the SSL certificate. Otherwise OpenSSL will prompt the user, possibly many times, if the certificate or private key is encrypted. Can be overridden by the - 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable. + `GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable. http.sslCAInfo:: File containing the certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden by the - 'GIT_SSL_CAINFO' environment variable. + `GIT_SSL_CAINFO` environment variable. http.sslCAPath:: Path containing files with the CA certificates to verify the peer with when fetching or pushing over HTTPS. Can be overridden - by the 'GIT_SSL_CAPATH' environment variable. + by the `GIT_SSL_CAPATH` environment variable. + +http.pinnedpubkey:: + Public key of the https service. It may either be the filename of + a PEM or DER encoded public key file or a string starting with + 'sha256//' followed by the base64 encoded sha256 hash of the + public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will + exit with an error if this option is set but not supported by + cURL. http.sslTry:: Attempt to use AUTH SSL/TLS and encrypted data transfers @@ -1698,7 +1937,7 @@ http.sslTry:: http.maxRequests:: How many HTTP requests to launch in parallel. Can be overridden - by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5. + by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5. http.minSessions:: The number of curl sessions (counted across slots) to be kept across @@ -1717,13 +1956,13 @@ http.postBuffer:: http.lowSpeedLimit, http.lowSpeedTime:: If the HTTP transfer speed is less than 'http.lowSpeedLimit' for longer than 'http.lowSpeedTime' seconds, the transfer is aborted. - Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and - 'GIT_HTTP_LOW_SPEED_TIME' environment variables. + Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and + `GIT_HTTP_LOW_SPEED_TIME` environment variables. http.noEPSV:: A boolean which disables using of EPSV ftp command by curl. This can helpful with some "poor" ftp servers which don't - support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV' + support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV` environment variable. Default is false (curl will use EPSV). http.userAgent:: @@ -1733,7 +1972,17 @@ http.userAgent:: such as Mozilla/4.0. This may be necessary, for instance, if connecting through a firewall that restricts HTTP connections to a set of common USER_AGENT strings (but not including those like git/1.7.1). - Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable. + Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable. + +http.followRedirects:: + Whether git should follow HTTP redirects. If set to `true`, git + will transparently follow any redirect issued by a server it + encounters. If set to `false`, git will treat all redirects as + errors. If set to `initial`, git will follow redirects only for + the initial request to a remote, but not for subsequent + follow-up HTTP requests. Since git uses the redirected URL as + the base for the follow-up requests, this is generally + sufficient. The default is `initial`. http.<url>.*:: Any of the http.* options above can be applied selectively to some URLs. @@ -1745,7 +1994,10 @@ http.<url>.*:: must match exactly between the config key and the URL. . Host/domain name (e.g., `example.com` in `https://example.com/`). - This field must match exactly between the config key and the URL. + This field must match between the config key and the URL. It is + possible to specify a `*` as part of the host name to match all subdomains + at this level. `https://*.example.com/` for example would match + `https://foo.example.com/`, but not `https://foo.bar.example.com/`. . Port number (e.g., `8080` in `http://example.com:8080/`). This field must match exactly between the config key and the URL. @@ -1780,6 +2032,17 @@ Environment variable settings always override any matches. The URLs that are matched against are those given directly to Git commands. This means any URLs visited as a result of a redirection do not participate in matching. +ssh.variant:: + Depending on the value of the environment variables `GIT_SSH` or + `GIT_SSH_COMMAND`, or the config setting `core.sshCommand`, Git + auto-detects whether to adjust its command-line parameters for use + with plink or tortoiseplink, as opposed to the default (OpenSSH). ++ +The config variable `ssh.variant` can be set to override this auto-detection; +valid values are `ssh`, `plink`, `putty` or `tortoiseplink`. Any other value +will be treated as normal ssh. This setting can be overridden via the +environment variable `GIT_SSH_VARIANT`. + i18n.commitEncoding:: Character encoding the commit messages are stored in; Git itself does not care per se, but this information is necessary e.g. when @@ -1833,6 +2096,14 @@ interactive.singleKey:: setting is silently ignored if portable keystroke input is not available; requires the Perl module Term::ReadKey. +interactive.diffFilter:: + When an interactive command (such as `git add --patch`) shows + a colorized diff, git will pipe the diff through the shell + command defined by this configuration variable. The command may + mark up the diff further for human consumption, provided that it + retains a one-to-one correspondence with the lines in the + original diff. Defaults to disabled (no filtering). + log.abbrevCommit:: If true, makes linkgit:git-log[1], linkgit:git-show[1], and linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may @@ -1848,7 +2119,10 @@ log.decorate:: command. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the full ref name (including prefix) will be printed. - This is the same as the log commands '--decorate' option. + If 'auto' is specified, then if the output is going to a terminal, + the ref names are shown as if 'short' were given, otherwise no ref + names are shown. This is the same as the `--decorate` option + of the `git log`. log.follow:: If `true`, `git log` will act as if the `--follow` option was used when @@ -1856,6 +2130,10 @@ log.follow:: i.e. it cannot be used to follow multiple files and does not work well on non-linear history. +log.graphColors:: + A list of colors, separated by commas, that can be used to draw + history lines in `git log --graph`. + log.showRoot:: If true, the initial commit will be shown as a big creation event. This is equivalent to a diff against an empty tree. @@ -2083,7 +2361,7 @@ pack.indexVersion:: larger than 2 GB. + If you have an old Git that does not understand the version 2 `*.idx` file, -cloning or fetching over a non native protocol (e.g. "http" and "rsync") +cloning or fetching over a non native protocol (e.g. "http") that will copy both `*.pack` file and corresponding `*.idx` file from the other side may give you a repository that cannot be accessed with your older version of Git. If the `*.pack` file is smaller than 2 GB, however, @@ -2094,8 +2372,11 @@ pack.packSizeLimit:: The maximum size of a pack. This setting only affects packing to a file when repacking, i.e. the git:// protocol is unaffected. It can be overridden by the `--max-pack-size` - option of linkgit:git-repack[1]. The minimum size allowed is - limited to 1 MiB. The default is unlimited. + option of linkgit:git-repack[1]. Reaching this limit results + in the creation of multiple packfiles; which in turn prevents + bitmaps from being created. + The minimum size allowed is limited to 1 MiB. + The default is unlimited. Common unit suffixes of 'k', 'm', or 'g' are supported. @@ -2138,6 +2419,52 @@ pretty.<name>:: Note that an alias with the same name as a built-in format will be silently ignored. +protocol.allow:: + If set, provide a user defined default policy for all protocols which + don't explicitly have a policy (`protocol.<name>.allow`). By default, + if unset, known-safe protocols (http, https, git, ssh, file) have a + default policy of `always`, known-dangerous protocols (ext) have a + default policy of `never`, and all other protocols have a default + policy of `user`. Supported policies: ++ +-- + +* `always` - protocol is always able to be used. + +* `never` - protocol is never able to be used. + +* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is + either unset or has a value of 1. This policy should be used when you want a + protocol to be directly usable by the user but don't want it used by commands which + execute clone/fetch/push commands without user input, e.g. recursive + submodule initialization. + +-- + +protocol.<name>.allow:: + Set a policy to be used by protocol `<name>` with clone/fetch/push + commands. See `protocol.allow` above for the available policies. ++ +The protocol names currently used by git are: ++ +-- + - `file`: any local file-based path (including `file://` URLs, + or local paths) + + - `git`: the anonymous git protocol over a direct TCP + connection (or proxy, if configured) + + - `ssh`: git over ssh (including `host:path` syntax, + `ssh://`, etc). + + - `http`: git over http, both "smart http" and "dumb http". + Note that this does _not_ include `https`; if you want to configure + both, you must do so individually. + + - any external helpers are named by their protocol (e.g., use + `hg` to allow the `git-remote-hg` helper) +-- + pull.ff:: By default, Git does not create an extra merge commit when merging a commit that is a descendant of the current commit. Instead, the @@ -2158,6 +2485,8 @@ When preserve, also pass `--preserve-merges` along to 'git rebase' so that locally committed merge commits will not be flattened by running 'git pull'. + +When the value is `interactive`, the rebase is run in interactive mode. ++ *NOTE*: this is a possibly dangerous operation; do *not* use it unless you understand the implications (see linkgit:git-rebase[1] for details). @@ -2192,6 +2521,8 @@ push.default:: pushing to the same repository you would normally pull from (i.e. central workflow). +* `tracking` - This is a deprecated synonym for `upstream`. + * `simple` - in centralized workflow, work like `upstream` with an added safety to refuse to push if the upstream branch's name is different from the local one. @@ -2225,25 +2556,39 @@ new default). -- push.followTags:: - If set to true enable '--follow-tags' option by default. You + If set to true enable `--follow-tags` option by default. You may override this configuration at time of push by specifying - '--no-follow-tags'. + `--no-follow-tags`. push.gpgSign:: May be set to a boolean value, or the string 'if-asked'. A true - value causes all pushes to be GPG signed, as if '--signed' is + value causes all pushes to be GPG signed, as if `--signed` is passed to linkgit:git-push[1]. The string 'if-asked' causes pushes to be signed if the server supports it, as if - '--signed=if-asked' is passed to 'git push'. A false value may + `--signed=if-asked` is passed to 'git push'. A false value may override a value from a lower-priority config file. An explicit command-line flag always overrides this config option. +push.recurseSubmodules:: + Make sure all submodule commits used by the revisions to be pushed + are available on a remote-tracking branch. If the value is 'check' + then Git will verify that all submodule commits that changed in the + revisions to be pushed are available on at least one remote of the + submodule. If any commits are missing, the push will be aborted and + exit with non-zero status. If the value is 'on-demand' then all + submodules that changed in the revisions to be pushed will be + pushed. If on-demand was not able to push all necessary revisions + it will also be aborted and exit with non-zero status. If the value + is 'no' then default behavior of ignoring submodules when pushing + is retained. You may override this configuration at time of push by + specifying '--recurse-submodules=check|on-demand|no'. + rebase.stat:: Whether to show a diffstat of what changed upstream since the last rebase. False by default. rebase.autoSquash:: - If set to true enable '--autosquash' option by default. + If set to true enable `--autosquash` option by default. rebase.autoStash:: When set to true, automatically create a temporary stash @@ -2264,15 +2609,20 @@ rebase.missingCommitsCheck:: command in the todo-list. Defaults to "ignore". -rebase.instructionFormat +rebase.instructionFormat:: A format string, as specified in linkgit:git-log[1], to be used for the instruction list during an interactive rebase. The format will automatically have the long commit hash prepended to the format. receive.advertiseAtomic:: By default, git-receive-pack will advertise the atomic push - capability to its clients. If you don't want to this capability - to be advertised, set this variable to false. + capability to its clients. If you don't want to advertise this + capability, set this variable to false. + +receive.advertisePushOptions:: + By default, git-receive-pack will advertise the push options + capability to its clients. If you don't want to advertise this + capability, set this variable to false. receive.autogc:: By default, git-receive-pack will run "git-gc --auto" after @@ -2327,6 +2677,15 @@ receive.fsck.skipList:: can be safely ignored such as invalid committer email addresses. Note: corrupt objects cannot be skipped with this setting. +receive.keepAlive:: + After receiving the pack from the client, `receive-pack` may + produce no output (if `--quiet` was specified) while processing + the pack, causing some networks to drop the TCP connection. + With this option set, if `receive-pack` does not transmit + any data in this phase for `receive.keepAlive` seconds, it will + send a short keepalive packet. The default is 5 seconds; set + to 0 to disable keepalives entirely. + receive.unpackLimit:: If the number of objects received in a push is below this limit then the objects will be unpacked into loose object @@ -2337,6 +2696,12 @@ receive.unpackLimit:: especially on slow filesystems. If not set, the value of `transfer.unpackLimit` is used instead. +receive.maxInputSize:: + If the size of the incoming pack stream is larger than this + limit, then git-receive-pack will error out, instead of + accepting the pack file. If not set or set to 0, then the size + is unlimited. + receive.denyDeletes:: If set to true, git-receive-pack will deny a ref update that deletes the ref. Use this to prevent such a ref deletion via a push. @@ -2402,6 +2767,11 @@ remote.<name>.proxy:: the proxy to use for that remote. Set to the empty string to disable proxying for that remote. +remote.<name>.proxyAuthMethod:: + For remotes that require curl (http, https and ftp), the method to use for + authenticating against the proxy in use (probably set in + `remote.<name>.proxy`). See `http.proxyAuthMethod`. + remote.<name>.fetch:: The default set of "refspec" for linkgit:git-fetch[1]. See linkgit:git-fetch[1]. @@ -2474,8 +2844,9 @@ repack.writeBitmaps:: objects to disk (e.g., when `git repack -a` is run). This index can speed up the "counting objects" phase of subsequent packs created for clones and fetches, at the cost of some disk - space and extra time spent on the initial repack. Defaults to - false. + space and extra time spent on the initial repack. This has + no effect if multiple packfiles are created. + Defaults to false. rerere.autoUpdate:: When set to true, `git-rerere` updates the index with the @@ -2494,7 +2865,7 @@ sendemail.identity:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. sendemail.smtpEncryption:: See linkgit:git-send-email[1] for description. Note that this @@ -2511,7 +2882,7 @@ sendemail.<identity>.*:: Identity-specific versions of the 'sendemail.*' parameters found below, taking precedence over those when the this identity is selected, through command-line or - 'sendemail.identity'. + `sendemail.identity`. sendemail.aliasesFile:: sendemail.aliasFileType:: @@ -2541,12 +2912,37 @@ sendemail.xmailer:: See linkgit:git-send-email[1] for description. sendemail.signedoffcc (deprecated):: - Deprecated alias for 'sendemail.signedoffbycc'. + Deprecated alias for `sendemail.signedoffbycc`. showbranch.default:: The default set of branches for linkgit:git-show-branch[1]. See linkgit:git-show-branch[1]. +splitIndex.maxPercentChange:: + When the split index feature is used, this specifies the + percent of entries the split index can contain compared to the + total number of entries in both the split index and the shared + index before a new shared index is written. + The value should be between 0 and 100. If the value is 0 then + a new shared index is always written, if it is 100 a new + shared index is never written. + By default the value is 20, so a new shared index is written + if the number of entries in the split index would be greater + than 20 percent of the total number of entries. + See linkgit:git-update-index[1]. + +splitIndex.sharedIndexExpire:: + When the split index feature is used, shared index files that + were not modified since the time this variable specifies will + be removed when a new shared index file is created. The value + "now" expires all entries immediately, and "never" suppresses + expiration altogether. + The default value is "2.weeks.ago". + Note that a shared index file is considered modified (for the + purpose of expiration) each time a new split-index file is + either created based on it or read from it. + See linkgit:git-update-index[1]. + status.relativePaths:: By default, linkgit:git-status[1] shows paths relative to the current directory. Setting this variable to `false` shows paths @@ -2613,12 +3009,14 @@ stash.showStat:: option will show diffstat of the stash. Defaults to true. See description of 'show' command in linkgit:git-stash[1]. -submodule.<name>.path:: submodule.<name>.url:: - The path within this project and URL for a submodule. These - variables are initially populated by 'git submodule init'. See - linkgit:git-submodule[1] and linkgit:gitmodules[5] for - details. + The URL for a submodule. This variable is copied from the .gitmodules + file to the git config via 'git submodule init'. The user can change + the configured URL before obtaining the submodule via 'git submodule + update'. If neither submodule.<name>.active or submodule.active are + set, the presence of this variable is used as a fallback to indicate + whether the submodule is of interest to git commands. + See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details. submodule.<name>.update:: The default update procedure for a submodule. This variable @@ -2655,6 +3053,39 @@ submodule.<name>.ignore:: "--ignore-submodules" option. The 'git submodule' commands are not affected by this setting. +submodule.<name>.active:: + Boolean value indicating if the submodule is of interest to git + commands. This config option takes precedence over the + submodule.active config option. + +submodule.active:: + A repeated field which contains a pathspec used to match against a + submodule's path to determine if the submodule is of interest to git + commands. + +submodule.fetchJobs:: + Specifies how many submodules are fetched/cloned at the same time. + A positive integer allows up to that number of submodules fetched + in parallel. A value of 0 will give some reasonable default. + If unset, it defaults to 1. + +submodule.alternateLocation:: + Specifies how the submodules obtain alternates when submodules are + cloned. Possible values are `no`, `superproject`. + By default `no` is assumed, which doesn't add references. When the + value is set to `superproject` the submodule to be cloned computes + its alternates location relative to the superprojects alternate. + +submodule.alternateErrorStrategy:: + Specifies how to treat errors with the alternates for a submodule + as computed via `submodule.alternateLocation`. Possible values are + `ignore`, `info`, `die`. Default is `die`. + +tag.forceSignAnnotated:: + A boolean to specify whether annotated tags created should be GPG signed. + If `--annotate` is specified on the command line, it takes + precedence over this option. + tag.sort:: This variable controls the sort ordering of tags when displayed by linkgit:git-tag[1]. Without the "--sort=<value>" option provided, the @@ -2694,6 +3125,11 @@ is omitted from the advertisements but `refs/heads/master` and `refs/namespaces/bar/refs/heads/master` are still advertised as so-called "have" lines. In order to match refs before stripping, add a `^` in front of the ref name. If you combine `!` and `^`, `!` must be specified first. ++ +Even if you hide refs, a client may still be able to steal the target +objects via the techniques described in the "SECURITY" section of the +linkgit:gitnamespaces[7] man page; it's best to keep private data in a +separate repository. transfer.unpackLimit:: When `fetch.unpackLimit` or `receive.unpackLimit` are @@ -2703,7 +3139,7 @@ transfer.unpackLimit:: uploadarchive.allowUnreachable:: If true, allow clients to use `git archive --remote` to request any tree, whether reachable from the ref tips or not. See the - discussion in the `SECURITY` section of + discussion in the "SECURITY" section of linkgit:git-upload-archive[1] for more details. Defaults to `false`. @@ -2717,12 +3153,23 @@ uploadpack.allowTipSHA1InWant:: When `uploadpack.hideRefs` is in effect, allow `upload-pack` to accept a fetch request that asks for an object at the tip of a hidden ref (by default, such a request is rejected). - see also `uploadpack.hideRefs`. + See also `uploadpack.hideRefs`. Even if this is false, a client + may be able to steal objects via the techniques described in the + "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's + best to keep private data in a separate repository. uploadpack.allowReachableSHA1InWant:: Allow `upload-pack` to accept a fetch request that asks for an object that is reachable from any ref tip. However, note that calculating object reachability is computationally expensive. + Defaults to `false`. Even if this is false, a client may be able + to steal objects via the techniques described in the "SECURITY" + section of the linkgit:gitnamespaces[7] man page; it's best to + keep private data in a separate repository. + +uploadpack.allowAnySHA1InWant:: + Allow `upload-pack` to accept a fetch request that asks for any + object at all. Defaults to `false`. uploadpack.keepAlive:: @@ -2736,6 +3183,21 @@ uploadpack.keepAlive:: `uploadpack.keepAlive` seconds. Setting this option to 0 disables keepalive packets entirely. The default is 5 seconds. +uploadpack.packObjectsHook:: + If this option is set, when `upload-pack` would run + `git pack-objects` to create a packfile for a client, it will + run this shell command instead. The `pack-objects` command and + arguments it _would_ have run (including the `git pack-objects` + at the beginning) are appended to the shell command. The stdin + and stdout of the hook are treated as if `pack-objects` itself + was run. I.e., `upload-pack` will feed input intended for + `pack-objects` to the hook, and expects a completed packfile on + stdout. ++ +Note that this configuration variable is ignored if it is seen in the +repository-level config (this is a safety measure against fetching from +untrusted repositories). + url.<base>.insteadOf:: Any URL that starts with this value will be rewritten to start, instead, with <base>. In cases where some site serves a @@ -2762,14 +3224,24 @@ url.<base>.pushInsteadOf:: user.email:: Your email address to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and - 'EMAIL' environment variables. See linkgit:git-commit-tree[1]. + Can be overridden by the `GIT_AUTHOR_EMAIL`, `GIT_COMMITTER_EMAIL`, and + `EMAIL` environment variables. See linkgit:git-commit-tree[1]. user.name:: Your full name to be recorded in any newly created commits. - Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME' + Can be overridden by the `GIT_AUTHOR_NAME` and `GIT_COMMITTER_NAME` environment variables. See linkgit:git-commit-tree[1]. +user.useConfigOnly:: + Instruct Git to avoid trying to guess defaults for `user.email` + and `user.name`, and instead retrieve the values only from the + configuration. For example, if you have multiple email addresses + and would like to use a different one for each repository, then + with this configuration option set to `true` in the global config + along with a name, Git will prompt you to set up an email before + making new commits in a newly cloned repository. + Defaults to `false`. + user.signingKey:: If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the key you want it to automatically when creating a signed tag or @@ -2777,17 +3249,39 @@ user.signingKey:: This option is passed unchanged to gpg's --local-user parameter, so you may specify a key using any method that gpg supports. -versionsort.prereleaseSuffix:: - When version sort is used in linkgit:git-tag[1], prerelease - tags (e.g. "1.0-rc1") may appear after the main release - "1.0". By specifying the suffix "-rc" in this variable, - "1.0-rc1" will appear before "1.0". -+ -This variable can be specified multiple times, once per suffix. The -order of suffixes in the config file determines the sorting order -(e.g. if "-pre" appears before "-rc" in the config file then 1.0-preXX -is sorted before 1.0-rcXX). The sorting order between different -suffixes is undefined if they are in multiple config files. +versionsort.prereleaseSuffix (deprecated):: + Deprecated alias for `versionsort.suffix`. Ignored if + `versionsort.suffix` is set. + +versionsort.suffix:: + Even when version sort is used in linkgit:git-tag[1], tagnames + with the same base version but different suffixes are still sorted + lexicographically, resulting e.g. in prerelease tags appearing + after the main release (e.g. "1.0-rc1" after "1.0"). This + variable can be specified to determine the sorting order of tags + with different suffixes. ++ +By specifying a single suffix in this variable, any tagname containing +that suffix will appear before the corresponding main release. E.g. if +the variable is set to "-rc", then all "1.0-rcX" tags will appear before +"1.0". If specified multiple times, once per suffix, then the order of +suffixes in the configuration will determine the sorting order of tagnames +with those suffixes. E.g. if "-pre" appears before "-rc" in the +configuration, then all "1.0-preX" tags will be listed before any +"1.0-rcX" tags. The placement of the main release tag relative to tags +with various suffixes can be determined by specifying the empty suffix +among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and +"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags +are listed first, followed by "v4.8", then "v4.8-ckX" and finally +"v4.8-bfsX". ++ +If more than one suffixes match the same tagname, then that tagname will +be sorted according to the suffix which starts at the earliest position in +the tagname. If more than one different matching suffixes start at +that earliest position, then that tagname will be sorted according to the +longest of those suffixes. +The sorting order between different suffixes is undefined if they are +in multiple config files. web.browser:: Specify a web browser that may be used by some commands. diff --git a/Documentation/date-formats.txt b/Documentation/date-formats.txt index ccd1fc8..6926e0a 100644 --- a/Documentation/date-formats.txt +++ b/Documentation/date-formats.txt @@ -1,7 +1,7 @@ DATE FORMATS ------------ -The GIT_AUTHOR_DATE, GIT_COMMITTER_DATE environment variables +The `GIT_AUTHOR_DATE`, `GIT_COMMITTER_DATE` environment variables ifdef::git-commit[] and the `--date` option endif::git-commit[] @@ -11,7 +11,7 @@ Git internal format:: It is `<unix timestamp> <time zone offset>`, where `<unix timestamp>` is the number of seconds since the UNIX epoch. `<time zone offset>` is a positive or negative offset from UTC. - For example CET (which is 2 hours ahead UTC) is `+0200`. + For example CET (which is 1 hour ahead of UTC) is `+0100`. RFC 2822:: The standard email format as described by RFC 2822, for example diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt index 6eaa452..cbce8ec 100644 --- a/Documentation/diff-config.txt +++ b/Documentation/diff-config.txt @@ -60,6 +60,12 @@ diff.context:: Generate diffs with <n> lines of context instead of the default of 3. This value is overridden by the -U option. +diff.interHunkContext:: + Show the context between diff hunks, up to the specified number + of lines, thereby fusing the hunks that are close to each other. + This value serves as the default for the `--inter-hunk-context` + command line option. + diff.external:: If this config variable is set, diff generation is not performed using the internal diff machinery, but using the @@ -75,7 +81,7 @@ diff.ignoreSubmodules:: commands such as 'git diff-files'. 'git checkout' also honors this setting when reporting uncommitted changes. Setting it to 'all' disables the submodule summary normally shown by 'git commit' - and 'git status' when 'status.submoduleSummary' is set unless it is + and 'git status' when `status.submoduleSummary` is set unless it is overridden by using the --ignore-submodules command-line option. The 'git submodule' commands are not affected by this setting. @@ -99,18 +105,23 @@ diff.noprefix:: If set, 'git diff' does not show any source or destination prefix. diff.orderFile:: - File indicating how to order files within a diff, using - one shell glob pattern per line. - Can be overridden by the '-O' option to linkgit:git-diff[1]. + File indicating how to order files within a diff. + See the '-O' option to linkgit:git-diff[1] for details. + If `diff.orderFile` is a relative pathname, it is treated as + relative to the top of the working tree. diff.renameLimit:: The number of files to consider when performing the copy/rename - detection; equivalent to the 'git diff' option '-l'. + detection; equivalent to the 'git diff' option `-l`. diff.renames:: - Tells Git to detect renames. If set to any boolean value, it - will enable basic rename detection. If set to "copies" or - "copy", it will detect copies, as well. + Whether and how Git detects renames. If set to "false", + rename detection is disabled. If set to "true", basic rename + detection is enabled. If set to "copies" or "copy", Git will + detect copies, as well. Defaults to true. Note that this + affects only 'git diff' Porcelain like linkgit:git-diff[1] and + linkgit:git-log[1], and not lower level commands such as + linkgit:git-diff-files[1]. diff.suppressBlankEmpty:: A boolean to inhibit the standard behavior of printing a space @@ -118,10 +129,11 @@ diff.suppressBlankEmpty:: diff.submodule:: Specify the format in which differences in submodules are - shown. The "log" format lists the commits in the range like - linkgit:git-submodule[1] `summary` does. The "short" format - format just shows the names of the commits at the beginning - and end of the range. Defaults to short. + shown. The "short" format just shows the names of the commits + at the beginning and end of the range. The "log" format lists + the commits in the range like linkgit:git-submodule[1] `summary` + does. The "diff" format shows an inline diff of the changed + contents of the submodule. Defaults to "short". diff.wordRegex:: A POSIX Extended Regular Expression used to determine what is a "word" @@ -166,6 +178,10 @@ diff.tool:: include::mergetools-diff.txt[] +diff.indentHeuristic:: + Set this option to `true` to enable experimental heuristics + that shift diff hunk boundaries to make patches easier to read. + diff.algorithm:: Choose a diff algorithm. The variants are as follows: + @@ -182,3 +198,9 @@ diff.algorithm:: low-occurrence common elements". -- + + +diff.wsErrorHighlight:: + A comma separated list of `old`, `new`, `context`, that + specifies how whitespace errors on lines are highlighted + with `color.diff.whitespace`. Can be overridden by the + command line option `--ws-error-highlight=<kind>` diff --git a/Documentation/diff-format.txt b/Documentation/diff-format.txt index 85b0890..706916c 100644 --- a/Documentation/diff-format.txt +++ b/Documentation/diff-format.txt @@ -46,11 +46,11 @@ That is, from the left to the right: . sha1 for "dst"; 0\{40\} if creation, unmerged or "look at work tree". . a space. . status, followed by optional "score" number. -. a tab or a NUL when '-z' option is used. +. a tab or a NUL when `-z` option is used. . path for "src" -. a tab or a NUL when '-z' option is used; only exists for C or R. +. a tab or a NUL when `-z` option is used; only exists for C or R. . path for "dst"; only exists for C or R. -. an LF or a NUL when '-z' option is used, to terminate the record. +. an LF or a NUL when `-z` option is used, to terminate the record. Possible status letters are: @@ -78,15 +78,16 @@ Example: :100644 100644 5be4a4...... 000000...... M file.c ------------------------------------------------ -When `-z` option is not used, TAB, LF, and backslash characters -in pathnames are represented as `\t`, `\n`, and `\\`, -respectively. +Without the `-z` option, pathnames with "unusual" characters are +quoted as explained for the configuration variable `core.quotePath` +(see linkgit:git-config[1]). Using `-z` the filename is output +verbatim and the line is terminated by a NUL byte. diff format for merges ---------------------- "git-diff-tree", "git-diff-files" and "git-diff --raw" -can take '-c' or '--cc' option +can take `-c` or `--cc` option to generate diff output also for merge commits. The output differs from the format described above in the following way: diff --git a/Documentation/diff-generate-patch.txt b/Documentation/diff-generate-patch.txt index bcf54da..231105c 100644 --- a/Documentation/diff-generate-patch.txt +++ b/Documentation/diff-generate-patch.txt @@ -2,11 +2,11 @@ Generating patches with -p -------------------------- When "git-diff-index", "git-diff-tree", or "git-diff-files" are run -with a '-p' option, "git diff" without the '--raw' option, or +with a `-p` option, "git diff" without the `--raw` option, or "git log" with the "-p" option, they do not produce the output described above; instead they produce a patch file. You can customize the creation of such patches via the -GIT_EXTERNAL_DIFF and the GIT_DIFF_OPTS environment variables. +`GIT_EXTERNAL_DIFF` and the `GIT_DIFF_OPTS` environment variables. What the -p option produces is slightly different from the traditional diff format: @@ -53,10 +53,9 @@ The index line includes the SHA-1 checksum before and after the change. The <mode> is included if the file mode does not change; otherwise, separate lines indicate the old and the new mode. -3. TAB, LF, double quote and backslash characters in pathnames - are represented as `\t`, `\n`, `\"` and `\\`, respectively. - If there is need for such substitution then the whole - pathname is put in double quotes. +3. Pathnames with "unusual" characters are quoted as explained for + the configuration variable `core.quotePath` (see + linkgit:git-config[1]). 4. All the `file1` files in the output refer to files before the commit, and all the `file2` files refer to files after the commit. @@ -114,11 +113,11 @@ index fabadb8,cc95eb0..4866510 ------------ 1. It is preceded with a "git diff" header, that looks like - this (when '-c' option is used): + this (when `-c` option is used): diff --combined file + -or like this (when '--cc' option is used): +or like this (when `--cc` option is used): diff --cc file diff --git a/Documentation/diff-heuristic-options.txt b/Documentation/diff-heuristic-options.txt new file mode 100644 index 0000000..d4f3d95 --- /dev/null +++ b/Documentation/diff-heuristic-options.txt @@ -0,0 +1,5 @@ +--indent-heuristic:: +--no-indent-heuristic:: + These are to help debugging and tuning experimental heuristics + (which are off by default) that shift diff hunk boundaries to + make patches easier to read. diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt index 306b7e3..89cc0f4 100644 --- a/Documentation/diff-options.txt +++ b/Documentation/diff-options.txt @@ -26,12 +26,12 @@ ifndef::git-format-patch[] ifdef::git-diff[] This is the default. endif::git-diff[] -endif::git-format-patch[] -s:: --no-patch:: Suppress diff output. Useful for commands like `git show` that show the patch by default, or to cancel the effect of `--patch`. +endif::git-format-patch[] -U<n>:: --unified=<n>:: @@ -63,6 +63,8 @@ ifndef::git-format-patch[] Synonym for `-p --raw`. endif::git-format-patch[] +include::diff-heuristic-options.txt[] + --minimal:: Spend extra time to make sure the smallest possible diff is produced. @@ -190,10 +192,9 @@ ifndef::git-log[] given, do not munge pathnames and use NULs as output field terminators. endif::git-log[] + -Without this option, each pathname output will have TAB, LF, double quotes, -and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, -respectively, and the pathname will be enclosed in double quotes if -any of those replacements occurred. +Without this option, pathnames with "unusual" characters are quoted as +explained for the configuration variable `core.quotePath` (see +linkgit:git-config[1]). --name-only:: Show only names of changed files. @@ -203,13 +204,16 @@ any of those replacements occurred. of the `--diff-filter` option on what the status letters mean. --submodule[=<format>]:: - Specify how differences in submodules are shown. When `--submodule` - or `--submodule=log` is given, the 'log' format is used. This format lists - the commits in the range like linkgit:git-submodule[1] `summary` does. - Omitting the `--submodule` option or specifying `--submodule=short`, - uses the 'short' format. This format just shows the names of the commits - at the beginning and end of the range. Can be tweaked via the - `diff.submodule` configuration variable. + Specify how differences in submodules are shown. When specifying + `--submodule=short` the 'short' format is used. This format just + shows the names of the commits at the beginning and end of the range. + When `--submodule` or `--submodule=log` is specified, the 'log' + format is used. This format lists the commits in the range like + linkgit:git-submodule[1] `summary` does. When `--submodule=diff` + is specified, the 'diff' format is used. This format shows an + inline diff of the changes in the submodule contents between the + commit range. Defaults to `diff.submodule` or the 'short' format + if the config option is unset. --color[=<when>]:: Show colored diff. @@ -271,7 +275,7 @@ For example, `--word-diff-regex=.` will treat each character as a word and, correspondingly, show differences character by character. + The regex can also be set via a diff driver or configuration option, see -linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly +linkgit:gitattributes[5] or linkgit:git-config[1]. Giving it explicitly overrides any diff driver or configuration setting. Diff drivers override configuration settings. @@ -286,8 +290,8 @@ endif::git-format-patch[] ifndef::git-format-patch[] --check:: - Warn if changes introduce whitespace errors. What are - considered whitespace errors is controlled by `core.whitespace` + Warn if changes introduce conflict markers or whitespace errors. + What are considered whitespace errors is controlled by `core.whitespace` configuration. By default, trailing whitespaces (including lines that solely consist of whitespaces) and a space character that is immediately followed by a tab character inside the @@ -303,6 +307,8 @@ ifndef::git-format-patch[] lines are highlighted. E.g. `--ws-error-highlight=new,old` highlights whitespace errors on both deleted and added lines. `all` can be used as a short-hand for `old,new,context`. + The `diff.wsErrorHighlight` configuration variable can be + used to specify the default behaviour. endif::git-format-patch[] @@ -412,6 +418,9 @@ ifndef::git-format-patch[] paths are selected if there is any file that matches other criteria in the comparison; if there is no file that matches other criteria, nothing is selected. ++ +Also, these upper-case letters can be downcased to exclude. E.g. +`--diff-filter=ad` excludes added and deleted paths. -S<string>:: Look for differences that change the number of occurrences of @@ -456,11 +465,41 @@ information. endif::git-format-patch[] -O<orderfile>:: - Output the patch in the order specified in the - <orderfile>, which has one shell glob pattern per line. + Control the order in which files appear in the output. This overrides the `diff.orderFile` configuration variable (see linkgit:git-config[1]). To cancel `diff.orderFile`, use `-O/dev/null`. ++ +The output order is determined by the order of glob patterns in +<orderfile>. +All files with pathnames that match the first pattern are output +first, all files with pathnames that match the second pattern (but not +the first) are output next, and so on. +All files with pathnames that do not match any pattern are output +last, as if there was an implicit match-all pattern at the end of the +file. +If multiple pathnames have the same rank (they match the same pattern +but no earlier patterns), their output order relative to each other is +the normal order. ++ +<orderfile> is parsed as follows: ++ +-- + - Blank lines are ignored, so they can be used as separators for + readability. + + - Lines starting with a hash ("`#`") are ignored, so they can be used + for comments. Add a backslash ("`\`") to the beginning of the + pattern if it starts with a hash. + + - Each other line contains a single pattern. +-- ++ +Patterns have the same syntax and semantics as patterns used for +fnmantch(3) without the FNM_PATHNAME flag, except a pathname also +matches a pattern if removing any number of the final pathname +components matches the pattern. For example, the pattern "`foo*bar`" +matches "`fooasdfbar`" and "`foo/bar/baz/asdf`" but not "`foobarx`". ifndef::git-format-patch[] -R:: @@ -501,6 +540,8 @@ endif::git-format-patch[] --inter-hunk-context=<lines>:: Show the context between diff hunks, up to the specified number of lines, thereby fusing hunks that are close to each other. + Defaults to `diff.interHunkContext` or 0 if the config option + is unset. -W:: --function-context:: @@ -559,5 +600,16 @@ endif::git-format-patch[] --no-prefix:: Do not show any source or destination prefix. +--line-prefix=<prefix>:: + Prepend an additional prefix to every line of output. + +--ita-invisible-in-index:: + By default entries added by "git add -N" appear as an existing + empty file in "git diff" and a new file in "git diff --cached". + This option makes the entry appear as a new file in "git diff" + and non-existent in "git diff --cached". This option could be + reverted with `--ita-visible-in-index`. Both options are + experimental and could be removed in future. + For more detailed explanation on these common options, see also linkgit:gitdiffcore[7]. diff --git a/Documentation/everyday.txto b/Documentation/everyday.txto index c5047d8..ae555bd 100644 --- a/Documentation/everyday.txto +++ b/Documentation/everyday.txto @@ -1,7 +1,7 @@ Everyday Git With 20 Commands Or So =================================== -This document has been moved to linkgit:giteveryday[1]. +This document has been moved to linkgit:giteveryday[7]. Please let the owners of the referring site know so that they can update the link you clicked to get here. diff --git a/Documentation/fetch-options.txt b/Documentation/fetch-options.txt index 45583d8..fb6bebb 100644 --- a/Documentation/fetch-options.txt +++ b/Documentation/fetch-options.txt @@ -8,10 +8,25 @@ option old data in `.git/FETCH_HEAD` will be overwritten. --depth=<depth>:: - Deepen or shorten the history of a 'shallow' repository created by - `git clone` with `--depth=<depth>` option (see linkgit:git-clone[1]) - to the specified number of commits from the tip of each remote - branch history. Tags for the deepened commits are not fetched. + Limit fetching to the specified number of commits from the tip of + each remote branch history. If fetching to a 'shallow' repository + created by `git clone` with `--depth=<depth>` option (see + linkgit:git-clone[1]), deepen or shorten the history to the specified + number of commits. Tags for the deepened commits are not fetched. + +--deepen=<depth>:: + Similar to --depth, except it specifies the number of commits + from the current shallow boundary instead of from the tip of + each remote branch history. + +--shallow-since=<date>:: + Deepen or shorten the history of a shallow repository to + include all reachable commits after <date>. + +--shallow-exclude=<revision>:: + Deepen or shorten the history of a shallow repository to + exclude commits reachable from a specified remote branch or tag. + This option can be specified multiple times. --unshallow:: If the source repository is complete, convert a shallow @@ -51,7 +66,7 @@ ifndef::git-pull[] -p:: --prune:: - After fetching, remove any remote-tracking references that no + Before fetching, remove any remote-tracking references that no longer exist on the remote. Tags are not subject to pruning if they are fetched only because of the default tag auto-following or due to a --tags option. However, if tags @@ -87,7 +102,7 @@ ifndef::git-pull[] to whatever else would otherwise be fetched. Using this option alone does not subject tags to pruning, even if --prune is used (though tags may be pruned anyway if they are also the - destination of an explicit refspec; see '--prune'). + destination of an explicit refspec; see `--prune`). --recurse-submodules[=yes|on-demand|no]:: This option controls if and under what conditions new commits of @@ -100,9 +115,16 @@ ifndef::git-pull[] reference to a commit that isn't already in the local submodule clone. +-j:: +--jobs=<n>:: + Number of parallel children to be used for fetching submodules. + Each will fetch from different submodules, such that fetching many + submodules will be faster. By default submodules will be fetched + one at a time. + --no-recurse-submodules:: Disable recursive fetching of submodules (this has the same effect as - using the '--recurse-submodules=no' option). + using the `--recurse-submodules=no` option). --submodule-prefix=<path>:: Prepend <path> to paths printed in informative messages @@ -129,7 +151,7 @@ endif::git-pull[] --upload-pack <upload-pack>:: When given, and the repository to fetch from is handled - by 'git fetch-pack', '--exec=<upload-pack>' is passed to + by 'git fetch-pack', `--exec=<upload-pack>` is passed to the command to specify non-default path for the command run on the other end. @@ -150,3 +172,11 @@ endif::git-pull[] by default when it is attached to a terminal, unless -q is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. + +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. diff --git a/Documentation/git-add.txt b/Documentation/git-add.txt index fe5282f..7ed63dc 100644 --- a/Documentation/git-add.txt +++ b/Documentation/git-add.txt @@ -11,7 +11,7 @@ SYNOPSIS 'git add' [--verbose | -v] [--dry-run | -n] [--force | -f] [--interactive | -i] [--patch | -p] [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]] [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing] - [--] [<pathspec>...] + [--chmod=(+|-)x] [--] [<pathspec>...] DESCRIPTION ----------- @@ -24,7 +24,7 @@ remove paths that do not exist in the working tree anymore. The "index" holds a snapshot of the content of the working tree, and it is this snapshot that is taken as the contents of the next commit. Thus -after making any changes to the working directory, and before running +after making any changes to the working tree, and before running the commit command, you must use the `add` command to add any new or modified files to the index. @@ -165,6 +165,11 @@ for "git add --no-all <pathspec>...", i.e. ignored removed files. be ignored, no matter if they are already present in the work tree or not. +--chmod=(+|-)x:: + Override the executable bit of the added files. The executable + bit is only changed in the index, the files on disk are left + unchanged. + \--:: This option can be used to separate command-line options from the list of files, (useful when filenames might be mistaken diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt index 452c1fe..12879e4 100644 --- a/Documentation/git-am.txt +++ b/Documentation/git-am.txt @@ -35,6 +35,7 @@ OPTIONS --signoff:: Add a `Signed-off-by:` line to the commit message, using the committer identity of yourself. + See the signoff option in linkgit:git-commit[1] for more information. -k:: --keep:: @@ -115,7 +116,8 @@ default. You can use `--no-utf8` to override this. By default the command will try to detect the patch format automatically. This option allows the user to bypass the automatic detection and specify the patch format that the patch(es) should be - interpreted as. Valid formats are mbox, stgit, stgit-series and hg. + interpreted as. Valid formats are mbox, mboxrd, + stgit, stgit-series and hg. -i:: --interactive:: @@ -197,12 +199,12 @@ When initially invoking `git am`, you give it the names of the mailboxes to process. Upon seeing the first patch that does not apply, it aborts in the middle. You can recover from this in one of two ways: -. skip the current patch by re-running the command with the '--skip' +. skip the current patch by re-running the command with the `--skip` option. . hand resolve the conflict in the working directory, and update the index file to bring it into a state that the patch should - have produced. Then run the command with the '--continue' option. + have produced. Then run the command with the `--continue` option. The command refuses to process new mailboxes until the current operation is finished, so if you decide to start over from scratch, diff --git a/Documentation/git-annotate.txt b/Documentation/git-annotate.txt index 05fd482..94be4b8 100644 --- a/Documentation/git-annotate.txt +++ b/Documentation/git-annotate.txt @@ -23,6 +23,7 @@ familiar command name for people coming from other SCM systems. OPTIONS ------- include::blame-options.txt[] +include::diff-heuristic-options.txt[] SEE ALSO -------- diff --git a/Documentation/git-apply.txt b/Documentation/git-apply.txt index d9ed6a1..631cbd8 100644 --- a/Documentation/git-apply.txt +++ b/Documentation/git-apply.txt @@ -13,7 +13,7 @@ SYNOPSIS [--apply] [--no-add] [--build-fake-ancestor=<file>] [-R | --reverse] [--allow-binary-replacement | --binary] [--reject] [-z] [-p<n>] [-C<n>] [--inaccurate-eof] [--recount] [--cached] - [--ignore-space-change | --ignore-whitespace ] + [--ignore-space-change | --ignore-whitespace] [--whitespace=(nowarn|warn|fix|error|error-all)] [--exclude=<path>] [--include=<path>] [--directory=<root>] [--verbose] [--unsafe-paths] [<patch>...] @@ -21,6 +21,8 @@ SYNOPSIS DESCRIPTION ----------- Reads the supplied diff output (i.e. "a patch") and applies it to files. +When running from a subdirectory in a repository, patched paths +outside the directory are ignored. With the `--index` option the patch is also applied to the index, and with the `--cached` option the patch is only applied to the index. Without these options, the command applies the patch only to files, @@ -106,10 +108,9 @@ the information is read from the current index instead. When `--numstat` has been given, do not munge pathnames, but use a NUL-terminated machine-readable format. + -Without this option, each pathname output will have TAB, LF, double quotes, -and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, -respectively, and the pathname will be enclosed in double quotes if -any of those replacements occurred. +Without this option, pathnames with "unusual" characters are quoted as +explained for the configuration variable `core.quotePath` (see +linkgit:git-config[1]). -p<n>:: Remove <n> leading slashes from traditional diff paths. The diff --git a/Documentation/git-bisect-lk2009.txt b/Documentation/git-bisect-lk2009.txt index c06efbd..e015f5b 100644 --- a/Documentation/git-bisect-lk2009.txt +++ b/Documentation/git-bisect-lk2009.txt @@ -366,7 +366,7 @@ skip" to do the same thing. (In fact the special exit code 125 makes Or if you want more control, you can inspect the current state using for example "git bisect visualize". It will launch gitk (or "git log" -if the DISPLAY environment variable is not set) to help you find a +if the `DISPLAY` environment variable is not set) to help you find a better bisection point. Either way, if you have a string of untestable commits, it might diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt index 7e79aae..bdd915a 100644 --- a/Documentation/git-bisect.txt +++ b/Documentation/git-bisect.txt @@ -18,8 +18,8 @@ on the subcommand: git bisect start [--term-{old,good}=<term> --term-{new,bad}=<term>] [--no-checkout] [<bad> [<good>...]] [--] [<paths>...] - git bisect (bad|new) [<rev>] - git bisect (good|old) [<rev>...] + git bisect (bad|new|<term-new>) [<rev>] + git bisect (good|old|<term-old>) [<rev>...] git bisect terms [--term-good | --term-bad] git bisect skip [(<rev>|<range>)...] git bisect reset [<commit>] @@ -205,7 +205,7 @@ $ git bisect visualize `view` may also be used as a synonym for `visualize`. -If the 'DISPLAY' environment variable is not set, 'git log' is used +If the `DISPLAY` environment variable is not set, 'git log' is used instead. You can also give command-line options such as `-p` and `--stat`. @@ -358,7 +358,7 @@ OPTIONS --no-checkout:: + Do not checkout the new working tree at each iteration of the bisection -process. Instead just update a special reference named 'BISECT_HEAD' to make +process. Instead just update a special reference named `BISECT_HEAD` to make it point to the commit that should be tested. + This option may be useful when the test you would perform in each step diff --git a/Documentation/git-blame.txt b/Documentation/git-blame.txt index e6e947c..fdc3aea 100644 --- a/Documentation/git-blame.txt +++ b/Documentation/git-blame.txt @@ -10,7 +10,8 @@ SYNOPSIS [verse] 'git blame' [-c] [-b] [-l] [--root] [-t] [-f] [-n] [-s] [-e] [-p] [-w] [--incremental] [-L <range>] [-S <revs-file>] [-M] [-C] [-C] [-C] [--since=<date>] - [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>] [--] <file> + [--progress] [--abbrev=<n>] [<rev> | --contents <file> | --reverse <rev>..<rev>] + [--] <file> DESCRIPTION ----------- @@ -88,6 +89,8 @@ include::blame-options.txt[] abbreviated object name, use <n>+1 digits. Note that 1 column is used for a caret to mark the boundary commit. +include::diff-heuristic-options.txt[] + THE PORCELAIN FORMAT -------------------- diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 4a7037f..81bd0a7 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -10,9 +10,10 @@ SYNOPSIS [verse] 'git branch' [--color[=<when>] | --no-color] [-r | -a] [--list] [-v [--abbrev=<length> | --no-abbrev]] - [--column[=<options>] | --no-column] - [(--merged | --no-merged | --contains) [<commit>]] [--sort=<key>] - [--points-at <object>] [<pattern>...] + [--column[=<options>] | --no-column] [--sort=<key>] + [(--merged | --no-merged) [<commit>]] + [--contains [<commit]] [--no-contains [<commit>]] + [--points-at <object>] [--format=<format>] [<pattern>...] 'git branch' [--set-upstream | --track | --no-track] [-l] [-f] <branchname> [<start-point>] 'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branchname>] 'git branch' --unset-upstream [<branchname>] @@ -35,14 +36,15 @@ as branch creation. With `--contains`, shows only the branches that contain the named commit (in other words, the branches whose tip commits are descendants of the -named commit). With `--merged`, only branches merged into the named -commit (i.e. the branches whose tip commits are reachable from the named -commit) will be listed. With `--no-merged` only branches not merged into -the named commit will be listed. If the <commit> argument is missing it -defaults to 'HEAD' (i.e. the tip of the current branch). +named commit), `--no-contains` inverts it. With `--merged`, only branches +merged into the named commit (i.e. the branches whose tip commits are +reachable from the named commit) will be listed. With `--no-merged` only +branches not merged into the named commit will be listed. If the <commit> +argument is missing it defaults to `HEAD` (i.e. the tip of the current +branch). The command's second form creates a new branch head named <branchname> -which points to the current 'HEAD', or <start-point> if given. +which points to the current `HEAD`, or <start-point> if given. Note that this will create the new branch, but it will not switch the working tree to it; use "git checkout <newbranch>" to switch to the @@ -91,6 +93,9 @@ OPTIONS based sha1 expressions such as "<branchname>@\{yesterday}". Note that in non-bare repositories, reflogs are usually enabled by default by the `core.logallrefupdates` config option. + The negated form `--no-create-reflog` only overrides an earlier + `--create-reflog`, but currently does not negate the setting of + `core.logallrefupdates`. -f:: --force:: @@ -118,6 +123,10 @@ OPTIONS default to color output. Same as `--color=never`. +-i:: +--ignore-case:: + Sorting and filtering branches are case insensitive. + --column[=<options>]:: --no-column:: Display branch listing in columns. See configuration variable @@ -135,8 +144,13 @@ This option is only applicable in non-verbose mode. List both remote-tracking branches and local branches. --list:: - Activate the list mode. `git branch <pattern>` would try to create a branch, - use `git branch --list <pattern>` to list matching branches. + List branches. With optional `<pattern>...`, e.g. `git + branch --list 'maint-*'`, list only the branches that match + the pattern(s). ++ +This should not be confused with `git branch -l <branchname>`, +which creates a branch named `<branchname>` with a reflog. +See `--create-reflog` above for details. -v:: -vv:: @@ -172,7 +186,7 @@ This option is only applicable in non-verbose mode. + This behavior is the default when the start point is a remote-tracking branch. Set the branch.autoSetupMerge configuration variable to `false` if you -want `git checkout` and `git branch` to always behave as if '--no-track' +want `git checkout` and `git branch` to always behave as if `--no-track` were given. Set it to `always` if you want this behavior when the start-point is either a local or remote-tracking branch. @@ -206,13 +220,19 @@ start-point is either a local or remote-tracking branch. Only list branches which contain the specified commit (HEAD if not specified). Implies `--list`. +--no-contains [<commit>]:: + Only list branches which don't contain the specified commit + (HEAD if not specified). Implies `--list`. + --merged [<commit>]:: Only list branches whose tips are reachable from the - specified commit (HEAD if not specified). Implies `--list`. + specified commit (HEAD if not specified). Implies `--list`, + incompatible with `--no-merged`. --no-merged [<commit>]:: Only list branches whose tips are not reachable from the - specified commit (HEAD if not specified). Implies `--list`. + specified commit (HEAD if not specified). Implies `--list`, + incompatible with `--merged`. <branchname>:: The name of the branch to create or delete. @@ -246,6 +266,11 @@ start-point is either a local or remote-tracking branch. --points-at <object>:: Only list branches of the given object. +--format <format>:: + A string that interpolates `%(fieldname)` from the object + pointed at by a ref being shown. The format is the same as + that of linkgit:git-for-each-ref[1]. + Examples -------- @@ -284,13 +309,16 @@ If you are creating a branch that you want to checkout immediately, it is easier to use the git checkout command with its `-b` option to create a branch and check it out with a single command. -The options `--contains`, `--merged` and `--no-merged` serve three related -but different purposes: +The options `--contains`, `--no-contains`, `--merged` and `--no-merged` +serve four related but different purposes: - `--contains <commit>` is used to find all branches which will need special attention if <commit> were to be rebased or amended, since those branches contain the specified <commit>. +- `--no-contains <commit>` is the inverse of that, i.e. branches that don't + contain the specified <commit>. + - `--merged` is used to find all branches which can be safely deleted, since those branches are fully contained by HEAD. diff --git a/Documentation/git-bundle.txt b/Documentation/git-bundle.txt index 0417562..3a8120c 100644 --- a/Documentation/git-bundle.txt +++ b/Documentation/git-bundle.txt @@ -20,7 +20,7 @@ DESCRIPTION Some workflows require that one or more branches of development on one machine be replicated on another machine, but the two machines cannot be directly connected, and therefore the interactive Git protocols (git, -ssh, rsync, http) cannot be used. This command provides support for +ssh, http) cannot be used. This command provides support for 'git fetch' and 'git pull' to operate by packaging objects and references in an archive at the originating machine, then importing those into another repository using 'git fetch' and 'git pull' diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index eb3d694..204541c 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -9,18 +9,22 @@ git-cat-file - Provide content or type and size information for repository objec SYNOPSIS -------- [verse] -'git cat-file' (-t [--allow-unknown-type]| -s [--allow-unknown-type]| -e | -p | <type> | --textconv ) <object> -'git cat-file' (--batch | --batch-check) [--follow-symlinks] +'git cat-file' (-t [--allow-unknown-type]| -s [--allow-unknown-type]| -e | -p | <type> | --textconv | --filters ) [--path=<path>] <object> +'git cat-file' (--batch | --batch-check) [ --textconv | --filters ] [--follow-symlinks] DESCRIPTION ----------- In its first form, the command provides the content or the type of an object in -the repository. The type is required unless '-t' or '-p' is used to find the -object type, or '-s' is used to find the object size, or '--textconv' is used -(which implies type "blob"). +the repository. The type is required unless `-t` or `-p` is used to find the +object type, or `-s` is used to find the object size, or `--textconv` or +`--filters` is used (which imply type "blob"). In the second form, a list of objects (separated by linefeeds) is provided on -stdin, and the SHA-1, type, and size of each object is printed on stdout. +stdin, and the SHA-1, type, and size of each object is printed on stdout. The +output format can be overridden using the optional `<format>` argument. If +either `--textconv` or `--filters` was specified, the input is expected to +list the object names followed by the path name, separated by a single white +space, so that the appropriate drivers can be determined. OPTIONS ------- @@ -54,19 +58,35 @@ OPTIONS --textconv:: Show the content as transformed by a textconv filter. In this case, - <object> has be of the form <tree-ish>:<path>, or :<path> in order - to apply the filter to the content recorded in the index at <path>. + <object> has to be of the form <tree-ish>:<path>, or :<path> in + order to apply the filter to the content recorded in the index at + <path>. + +--filters:: + Show the content as converted by the filters configured in + the current working tree for the given <path> (i.e. smudge filters, + end-of-line conversion, etc). In this case, <object> has to be of + the form <tree-ish>:<path>, or :<path>. + +--path=<path>:: + For use with --textconv or --filters, to allow specifying an object + name and a path separately, e.g. when it is difficult to figure out + the revision from which the blob came. --batch:: --batch=<format>:: Print object information and contents for each object provided - on stdin. May not be combined with any other options or arguments. - See the section `BATCH OUTPUT` below for details. + on stdin. May not be combined with any other options or arguments + except `--textconv` or `--filters`, in which case the input lines + also need to specify the path, separated by white space. See the + section `BATCH OUTPUT` below for details. --batch-check:: --batch-check=<format>:: Print object information for each object provided on stdin. May - not be combined with any other options or arguments. See the + not be combined with any other options or arguments except + `--textconv` or `--filters`, in which case the input lines also + need to specify the path, separated by white space. See the section `BATCH OUTPUT` below for details. --batch-all-objects:: @@ -144,13 +164,13 @@ respectively print: OUTPUT ------ -If '-t' is specified, one of the <type>. +If `-t` is specified, one of the <type>. -If '-s' is specified, the size of the <object> in bytes. +If `-s` is specified, the size of the <object> in bytes. -If '-e' is specified, no output. +If `-e` is specified, no output. -If '-p' is specified, the contents of <object> are pretty-printed. +If `-p` is specified, the contents of <object> are pretty-printed. If <type> is specified, the raw (though uncompressed) contents of the <object> will be returned. diff --git a/Documentation/git-check-ignore.txt b/Documentation/git-check-ignore.txt index e94367a..611754f 100644 --- a/Documentation/git-check-ignore.txt +++ b/Documentation/git-check-ignore.txt @@ -112,7 +112,7 @@ EXIT STATUS SEE ALSO -------- linkgit:gitignore[5] -linkgit:gitconfig[5] +linkgit:git-config[1] linkgit:git-ls-files[1] GIT diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 91a3622..92777ce 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -100,10 +100,10 @@ OPTIONS --normalize:: Normalize 'refname' by removing any leading slash (`/`) characters and collapsing runs of adjacent slashes between - name components into a single slash. Iff the normalized + name components into a single slash. If the normalized refname is valid then print it to standard output and exit - with a status of 0. (`--print` is a deprecated way to spell - `--normalize`.) + with a status of 0, otherwise exit with a non-zero status. + (`--print` is a deprecated way to spell `--normalize`.) EXAMPLES @@ -118,8 +118,8 @@ $ git check-ref-format --branch @{-1} * Determine the reference name to use for a new branch: + ------------ -$ ref=$(git check-ref-format --normalize "refs/heads/$newbranch") || -die "we do not like '$newbranch' as a branch name." +$ ref=$(git check-ref-format --normalize "refs/heads/$newbranch")|| +{ echo "we do not like '$newbranch' as a branch name." >&2 ; exit 1 ; } ------------ GIT diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 5e5273e..d6399c0 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -157,7 +157,7 @@ of it"). When creating a new branch, set up "upstream" configuration. See "--track" in linkgit:git-branch[1] for details. + -If no '-b' option is given, the name of the new branch will be +If no `-b` option is given, the name of the new branch will be derived from the remote-tracking branch, by looking at the local part of the refspec configured for the corresponding remote, and then stripping the initial part up to the "*". @@ -165,7 +165,7 @@ This would tell us to use "hack" as the local branch when branching off of "origin/hack" (or "remotes/origin/hack", or even "refs/remotes/origin/hack"). If the given name has no slash, or the above guessing results in an empty name, the guessing is aborted. You can -explicitly give a name with '-b' in such a case. +explicitly give a name with `-b` in such a case. --no-track:: Do not set up "upstream" configuration, even if the @@ -256,6 +256,13 @@ section of linkgit:git-add[1] to learn how to operate the `--patch` mode. out anyway. In other words, the ref can be held by more than one worktree. +--[no-]recurse-submodules:: + Using --recurse-submodules will update the content of all initialized + submodules according to the commit recorded in the superproject. If + local modifications in a submodule would be overwritten the checkout + will fail unless `-f` is used. If nothing (or --no-recurse-submodules) + is used, the work trees of submodules will not be updated. + <branch>:: Branch to checkout; if it refers to a branch (i.e., a name that, when prepended with "refs/heads/", is a valid ref), then that @@ -419,6 +426,18 @@ $ git reflog -2 HEAD # or $ git log -g -2 HEAD ------------ +ARGUMENT DISAMBIGUATION +----------------------- + +When there is only one argument given and it is not `--` (e.g. "git +checkout abc"), and when the argument is both a valid `<tree-ish>` +(e.g. a branch "abc" exists) and a valid `<pathspec>` (e.g. a file +or a directory whose name is "abc" exists), Git would usually ask +you to disambiguate. Because checking out a branch is so common an +operation, however, "git checkout abc" takes "abc" as a `<tree-ish>` +in such a situation. Use `git checkout -- <pathspec>` if you want +to checkout these paths out of the index. + EXAMPLES -------- diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt index 77da29a..d35d771 100644 --- a/Documentation/git-cherry-pick.txt +++ b/Documentation/git-cherry-pick.txt @@ -47,7 +47,7 @@ OPTIONS For a more complete list of ways to spell commits, see linkgit:gitrevisions[7]. Sets of commits can be passed but no traversal is done by - default, as if the '--no-walk' option was specified, see + default, as if the `--no-walk` option was specified, see linkgit:git-rev-list[1]. Note that specifying a range will feed all <commit>... arguments to a single revision walk (see a later example that uses 'maint master..next'). @@ -100,6 +100,7 @@ effect to your index in a row. -s:: --signoff:: Add Signed-off-by line at the end of the commit message. + See the signoff option in linkgit:git-commit[1] for more information. -S[<keyid>]:: --gpg-sign[=<keyid>]:: @@ -127,7 +128,7 @@ effect to your index in a row. --allow-empty-message:: By default, cherry-picking a commit with an empty message will fail. - This option overrides that behaviour, allowing commits with empty + This option overrides that behavior, allowing commits with empty messages to be cherry picked. --keep-redundant-commits:: diff --git a/Documentation/git-clean.txt b/Documentation/git-clean.txt index 641681f..03056da 100644 --- a/Documentation/git-clean.txt +++ b/Documentation/git-clean.txt @@ -16,7 +16,7 @@ DESCRIPTION Cleans the working tree by recursively removing files that are not under version control, starting from the current directory. -Normally, only files unknown to Git are removed, but if the '-x' +Normally, only files unknown to Git are removed, but if the `-x` option is specified, ignored files are also removed. This can, for example, be useful to remove all build products. @@ -37,9 +37,7 @@ OPTIONS to false, 'git clean' will refuse to delete files or directories unless given -f, -n or -i. Git will refuse to delete directories with .git sub directory or file unless a second -f - is given. This affects also git submodules where the storage area - of the removed submodule under .git/modules/ is not removed until - -f is given twice. + is given. -i:: --interactive:: diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 6bf000d..30052cc 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -14,8 +14,8 @@ SYNOPSIS [-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>] [--dissociate] [--separate-git-dir <git dir>] [--depth <depth>] [--[no-]single-branch] - [--recursive | --recurse-submodules] [--] <repository> - [<directory>] + [--recurse-submodules] [--[no-]shallow-submodules] + [--jobs <n>] [--] <repository> [<directory>] DESCRIPTION ----------- @@ -90,13 +90,16 @@ If you want to break the dependency of a repository cloned with `-s` on its source repository, you can simply run `git repack -a` to copy all objects from the source repository into a pack in the cloned repository. ---reference <repository>:: +--reference[-if-able] <repository>:: If the reference repository is on the local machine, automatically setup `.git/objects/info/alternates` to obtain objects from the reference repository. Using an already existing repository as an alternate will require fewer objects to be copied from the repository being cloned, reducing network and local storage costs. + When using the `--reference-if-able`, a non existing + directory is skipped with a warning instead of aborting + the clone. + *NOTE*: see the NOTE for the `--shared` option, and also the `--dissociate` option. @@ -115,8 +118,7 @@ objects from the source repository into a pack in the cloned repository. --quiet:: -q:: Operate quietly. Progress is not reported to the standard - error stream. This flag is also passed to the `rsync' - command when given. + error stream. --verbose:: -v:: @@ -190,30 +192,45 @@ objects from the source repository into a pack in the cloned repository. --depth <depth>:: Create a 'shallow' clone with a history truncated to the - specified number of revisions. + specified number of commits. Implies `--single-branch` unless + `--no-single-branch` is given to fetch the histories near the + tips of all branches. If you want to clone submodules shallowly, + also pass `--shallow-submodules`. + +--shallow-since=<date>:: + Create a shallow clone with a history after the specified time. + +--shallow-exclude=<revision>:: + Create a shallow clone with a history, excluding commits + reachable from a specified remote branch or tag. This option + can be specified multiple times. --[no-]single-branch:: Clone only the history leading to the tip of a single branch, either specified by the `--branch` option or the primary - branch remote's `HEAD` points at. When creating a shallow - clone with the `--depth` option, this is the default, unless - `--no-single-branch` is given to fetch the histories near the - tips of all branches. + branch remote's `HEAD` points at. Further fetches into the resulting repository will only update the remote-tracking branch for the branch this option was used for the initial cloning. If the HEAD at the remote did not point at any branch when `--single-branch` clone was made, no remote-tracking branch is created. ---recursive:: ---recurse-submodules:: - After the clone is created, initialize all submodules within, - using their default settings. This is equivalent to running +--recurse-submodules[=<pathspec]:: + After the clone is created, initialize and clone submodules + within based on the provided pathspec. If no pathspec is + provided, all submodules are initialized and cloned. + Submodules are initialized and cloned using their default + settings. The resulting clone has `submodule.active` set to + the provided pathspec, or "." (meaning all submodules) if no + pathspec is provided. This is equivalent to running `git submodule update --init --recursive` immediately after the clone is finished. This option is ignored if the cloned repository does not have a worktree/checkout (i.e. if any of `--no-checkout`/`-n`, `--bare`, or `--mirror` is given) +--[no-]shallow-submodules:: + All submodules which are cloned will be shallow with a depth of 1. + --separate-git-dir=<git dir>:: Instead of placing the cloned repository where it is supposed to be, place the cloned repository at the specified directory, @@ -221,6 +238,10 @@ objects from the source repository into a pack in the cloned repository. The result is Git repository can be separated from working tree. +-j <n>:: +--jobs <n>:: + The number of submodules fetched at the same time. + Defaults to the `submodule.fetchJobs` option. <repository>:: The (possibly remote) repository to clone from. See the diff --git a/Documentation/git-commit-tree.txt b/Documentation/git-commit-tree.txt index 48c33d7..002dae6 100644 --- a/Documentation/git-commit-tree.txt +++ b/Documentation/git-commit-tree.txt @@ -44,7 +44,7 @@ OPTIONS An existing tree object -p <parent>:: - Each '-p' indicates the id of a parent commit object. + Each `-p` indicates the id of a parent commit object. -m <message>:: A paragraph in the commit log message. This can be given more than @@ -61,8 +61,8 @@ OPTIONS stuck to the option without a space. --no-gpg-sign:: - Countermand `commit.gpgSign` configuration variable that is - set to force each and every commit to be signed. + Do not GPG-sign commit, to countermand a `--gpg-sign` option + given earlier on the command line. Commit Information diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt index 7f34a5b..ed0f5b9 100644 --- a/Documentation/git-commit.txt +++ b/Documentation/git-commit.txt @@ -29,7 +29,8 @@ The content to be added can be specified in several ways: 2. by using 'git rm' to remove files from the working tree and the index, again before using the 'commit' command; -3. by listing files as arguments to the 'commit' command, in which +3. by listing files as arguments to the 'commit' command + (without --interactive or --patch switch), in which case the commit will ignore changes staged in the index, and instead record the current content of the listed files (which must already be known to Git); @@ -41,7 +42,8 @@ The content to be added can be specified in several ways: actual commit; 5. by using the --interactive or --patch switches with the 'commit' command - to decide one by one which files or hunks should be part of the commit, + to decide one by one which files or hunks should be part of the commit + in addition to contents in the index, before finalizing the operation. See the ``Interactive Mode'' section of linkgit:git-add[1] to learn how to operate these modes. @@ -75,7 +77,7 @@ OPTIONS -c <commit>:: --reedit-message=<commit>:: - Like '-C', but with '-c' the editor is invoked, so that + Like '-C', but with `-c` the editor is invoked, so that the user can further edit the commit message. --fixup=<commit>:: @@ -115,9 +117,12 @@ OPTIONS -z:: --null:: - When showing `short` or `porcelain` status output, terminate - entries in the status output with NUL, instead of LF. If no - format is given, implies the `--porcelain` output format. + When showing `short` or `porcelain` status output, print the + filename verbatim and terminate the entries with NUL, instead of LF. + If no format is given, implies the `--porcelain` output format. + Without the `-z` option, filenames with "unusual" characters are + quoted as explained for the configuration variable `core.quotePath` + (see linkgit:git-config[1]). -F <file>:: --file=<file>:: @@ -154,7 +159,11 @@ OPTIONS -s:: --signoff:: Add Signed-off-by line by the committer at the end of the commit - log message. + log message. The meaning of a signoff depends on the project, + but it typically certifies that committer has + the rights to submit this work under the same license and + agrees to a Developer Certificate of Origin + (see http://developercertificate.org/ for more information). -n:: --no-verify:: @@ -197,7 +206,7 @@ default:: Otherwise `whitespace`. -- + -The default can be changed by the 'commit.cleanup' configuration +The default can be changed by the `commit.cleanup` configuration variable (see linkgit:git-config[1]). -e:: @@ -256,10 +265,11 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].) staged for other paths. This is the default mode of operation of 'git commit' if any paths are given on the command line, in which case this option can be omitted. - If this option is specified together with '--amend', then + If this option is specified together with `--amend`, then no paths need to be specified, which can be used to amend the last commit without committing changes that have - already been staged. + already been staged. If used together with `--allow-empty` + paths are also not required, and an empty commit will be created. -u[<mode>]:: --untracked-files[=<mode>]:: @@ -286,7 +296,8 @@ configuration variable documented in linkgit:git-config[1]. what changes the commit has. Note that this diff output doesn't have its lines prefixed with '#'. This diff will not be a part - of the commit message. + of the commit message. See the `commit.verbose` configuration + variable in linkgit:git-config[1]. + If specified twice, show in addition the unified diff between what would be committed and the worktree files, i.e. the unstaged @@ -445,14 +456,14 @@ include::i18n.txt[] ENVIRONMENT AND CONFIGURATION VARIABLES --------------------------------------- The editor used to edit the commit log message will be chosen from the -GIT_EDITOR environment variable, the core.editor configuration variable, the -VISUAL environment variable, or the EDITOR environment variable (in that +`GIT_EDITOR` environment variable, the core.editor configuration variable, the +`VISUAL` environment variable, or the `EDITOR` environment variable (in that order). See linkgit:git-var[1] for details. HOOKS ----- This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`, -and `post-commit` hooks. See linkgit:githooks[5] for more +`post-commit` and `post-rewrite` hooks. See linkgit:githooks[5] for more information. FILES diff --git a/Documentation/git-config.txt b/Documentation/git-config.txt index 2608ca7..83f86b9 100644 --- a/Documentation/git-config.txt +++ b/Documentation/git-config.txt @@ -9,18 +9,18 @@ git-config - Get and set repository or global options SYNOPSIS -------- [verse] -'git config' [<file-option>] [type] [-z|--null] name [value [value_regex]] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] name [value [value_regex]] 'git config' [<file-option>] [type] --add name value 'git config' [<file-option>] [type] --replace-all name value [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get name [value_regex] -'git config' [<file-option>] [type] [-z|--null] --get-all name [value_regex] -'git config' [<file-option>] [type] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] --get-all name [value_regex] +'git config' [<file-option>] [type] [--show-origin] [-z|--null] [--name-only] --get-regexp name_regex [value_regex] 'git config' [<file-option>] [type] [-z|--null] --get-urlmatch name URL 'git config' [<file-option>] --unset name [value_regex] 'git config' [<file-option>] --unset-all name [value_regex] 'git config' [<file-option>] --rename-section old_name new_name 'git config' [<file-option>] --remove-section name -'git config' [<file-option>] [-z|--null] [--name-only] -l | --list +'git config' [<file-option>] [--show-origin] [-z|--null] [--name-only] -l | --list 'git config' [<file-option>] --get-color name [default] 'git config' [<file-option>] --get-colorbool name [stdout-is-tty] 'git config' [<file-option>] -e | --edit @@ -31,40 +31,40 @@ You can query/set/replace/unset options with this command. The name is actually the section and the key separated by a dot, and the value will be escaped. -Multiple lines can be added to an option by using the '--add' option. +Multiple lines can be added to an option by using the `--add` option. If you want to update or unset an option which can occur on multiple lines, a POSIX regexp `value_regex` needs to be given. Only the existing values that match the regexp are updated or unset. If you want to handle the lines that do *not* match the regex, just prepend a single exclamation mark in front (see also <<EXAMPLES>>). -The type specifier can be either '--int' or '--bool', to make +The type specifier can be either `--int` or `--bool`, to make 'git config' ensure that the variable(s) are of the given type and convert the value to the canonical form (simple decimal number for int, -a "true" or "false" string for bool), or '--path', which does some -path expansion (see '--path' below). If no type specifier is passed, no +a "true" or "false" string for bool), or `--path`, which does some +path expansion (see `--path` below). If no type specifier is passed, no checks or transformations are performed on the value. When reading, the values are read from the system, global and repository local configuration files by default, and options -'--system', '--global', '--local' and '--file <filename>' can be +`--system`, `--global`, `--local` and `--file <filename>` can be used to tell the command to read from only that location (see <<FILES>>). When writing, the new value is written to the repository local -configuration file by default, and options '--system', '--global', -'--file <filename>' can be used to tell the command to write to -that location (you can say '--local' but that is the default). +configuration file by default, and options `--system`, `--global`, +`--file <filename>` can be used to tell the command to write to +that location (you can say `--local` but that is the default). This command will fail with non-zero status upon error. Some exit codes are: -. The config file is invalid (ret=3), -. can not write to the config file (ret=4), -. no section or name was provided (ret=2), -. the section or key is invalid (ret=1), -. you try to unset an option which does not exist (ret=5), -. you try to unset/set an option for which multiple lines match (ret=5), or -. you try to use an invalid regexp (ret=6). +- The section or key is invalid (ret=1), +- no section or name was provided (ret=2), +- the config file is invalid (ret=3), +- the config file cannot be written (ret=4), +- you try to unset an option which does not exist (ret=5), +- you try to unset/set an option for which multiple lines match (ret=5), or +- you try to use an invalid regexp (ret=6). On success, the command returns the exit code 0. @@ -86,8 +86,7 @@ OPTIONS found and the last value if multiple key values were found. --get-all:: - Like get, but does not fail if the number of values for the key - is not exactly one. + Like get, but returns all values for a multi-valued key. --get-regexp:: Like --get-all, but interprets the name as a regular expression and @@ -102,7 +101,7 @@ OPTIONS given URL is returned (if no such key exists, the value for section.key is used as a fallback). When given just the section as name, do so for all the keys in the section and - list them. + list them. Returns error code 1 if no value is found. --global:: For writing options: write to global `~/.gitconfig` file @@ -139,7 +138,7 @@ See also <<FILES>>. Use the given config file instead of the one specified by GIT_CONFIG. --blob blob:: - Similar to '--file' but use the given blob instead of a file. E.g. + Similar to `--file` but use the given blob instead of a file. E.g. you can use 'master:.gitmodules' to read values from the file '.gitmodules' in the master branch. See "SPECIFYING REVISIONS" section in linkgit:gitrevisions[7] for a more complete list of @@ -194,6 +193,12 @@ See also <<FILES>>. Output only the names of config variables for `--list` or `--get-regexp`. +--show-origin:: + Augment the output of all queried config options with the + origin type (file, standard input, blob, command line) and + the actual origin (config file path, ref, or blob id if + applicable). + --get-colorbool name [stdout-is-tty]:: Find the color setting for `name` (e.g. `color.diff`) and output @@ -215,17 +220,19 @@ See also <<FILES>>. -e:: --edit:: Opens an editor to modify the specified config file; either - '--system', '--global', or repository (default). + `--system`, `--global`, or repository (default). --[no-]includes:: Respect `include.*` directives in config files when looking up - values. Defaults to on. + values. Defaults to `off` when a specific file is given (e.g., + using `--file`, `--global`, etc) and `on` when searching all + config files. [[FILES]] FILES ----- -If not set explicitly with '--file', there are four files where +If not set explicitly with `--file`, there are four files where 'git config' will search for configuration options: $(prefix)/etc/gitconfig:: @@ -256,13 +263,16 @@ The files are read in the order given above, with last value found taking precedence over values read earlier. When multiple values are taken then all values of a key from all files will be used. +You may override individual configuration parameters when running any git +command by using the `-c` option. See linkgit:git[1] for details. + All writing options will per default write to the repository specific -configuration file. Note that this also affects options like '--replace-all' -and '--unset'. *'git config' will only ever change one file at a time*. +configuration file. Note that this also affects options like `--replace-all` +and `--unset`. *'git config' will only ever change one file at a time*. You can override these rules either by command-line options or by environment -variables. The '--global' and the '--system' options will limit the file used -to the global or system-wide file respectively. The GIT_CONFIG environment +variables. The `--global` and the `--system` options will limit the file used +to the global or system-wide file respectively. The `GIT_CONFIG` environment variable has a similar effect, but you can specify any filename you want. diff --git a/Documentation/git-count-objects.txt b/Documentation/git-count-objects.txt index 2ff3568..cb9b4d2 100644 --- a/Documentation/git-count-objects.txt +++ b/Documentation/git-count-objects.txt @@ -38,6 +38,11 @@ objects nor valid packs + size-garbage: disk space consumed by garbage files, in KiB (unless -H is specified) ++ +alternate: absolute path of alternate object databases; may appear +multiple times, one line per path. Note that if the path contains +non-printable characters, it may be surrounded by double-quotes and +contain C-style backslashed escape sequences. -H:: --human-readable:: diff --git a/Documentation/git-credential-cache.txt b/Documentation/git-credential-cache.txt index 89b7306..2b85826 100644 --- a/Documentation/git-credential-cache.txt +++ b/Documentation/git-credential-cache.txt @@ -33,10 +33,13 @@ OPTIONS --socket <path>:: Use `<path>` to contact a running cache daemon (or start a new - cache daemon if one is not started). Defaults to - `~/.git-credential-cache/socket`. If your home directory is on a - network-mounted filesystem, you may need to change this to a - local filesystem. + cache daemon if one is not started). + Defaults to `$XDG_CACHE_HOME/git/credential/socket` unless + `~/.git-credential-cache/` exists in which case + `~/.git-credential-cache/socket` is used instead. + If your home directory is on a network-mounted filesystem, you + may need to change this to a local filesystem. You must specify + an absolute path. CONTROLLING THE DAEMON ---------------------- diff --git a/Documentation/git-credential-store.txt b/Documentation/git-credential-store.txt index e3c8f27..25fb963 100644 --- a/Documentation/git-credential-store.txt +++ b/Documentation/git-credential-store.txt @@ -44,7 +44,7 @@ OPTIONS FILES ----- -If not set explicitly with '--file', there are two files where +If not set explicitly with `--file`, there are two files where git-credential-store will search for credentials in order of precedence: ~/.git-credentials:: diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index 00a0679..de1ebed 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -22,7 +22,7 @@ DESCRIPTION deprecated; it does not work with cvsps version 3 and later. If you are performing a one-shot import of a CVS repository consider using http://cvs2svn.tigris.org/cvs2git.html[cvs2git] or -https://github.com/BartMassey/parsecvs[parsecvs]. +http://www.catb.org/esr/cvs-fast-export/[cvs-fast-export]. Imports a CVS repository into Git. It will either create a new repository, or incrementally import into an existing one. @@ -74,10 +74,10 @@ OPTIONS akin to the way 'git clone' uses 'origin' by default. -o <branch-for-HEAD>:: - When no remote is specified (via -r) the 'HEAD' branch + When no remote is specified (via -r) the `HEAD` branch from CVS is imported to the 'origin' branch within the Git - repository, as 'HEAD' already has a special meaning for Git. - When a remote is specified the 'HEAD' branch is named + repository, as `HEAD` already has a special meaning for Git. + When a remote is specified the `HEAD` branch is named remotes/<remote>/master mirroring 'git clone' behaviour. Use this option if you want to import into a different branch. @@ -103,7 +103,7 @@ the old cvs2git tool. -p <options-for-cvsps>:: Additional options for cvsps. - The options '-u' and '-A' are implicit and should not be used here. + The options `-u` and '-A' are implicit and should not be used here. + If you need to pass multiple options, separate them with a comma. @@ -122,7 +122,7 @@ If you need to pass multiple options, separate them with a comma. -M <regex>:: Attempt to detect merges based on the commit message with a custom - regex. It can be used with '-m' to enable the default regexes + regex. It can be used with `-m` to enable the default regexes as well. You must escape forward slashes. + The regex must capture the source branch name in $1. @@ -186,7 +186,7 @@ messages, bug-tracking systems, email archives, and the like. OUTPUT ------ -If '-v' is specified, the script reports what it is doing. +If `-v` is specified, the script reports what it is doing. Otherwise, success is indicated the Unix way, i.e. by simply exiting with a zero exit status. diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt index db4d7a9..a336ae5 100644 --- a/Documentation/git-cvsserver.txt +++ b/Documentation/git-cvsserver.txt @@ -54,7 +54,7 @@ Print usage information and exit You can specify a list of allowed directories. If no directories are given, all are allowed. This is an additional restriction, gitcvs access still needs to be enabled by the `gitcvs.enabled` config option -unless '--export-all' was given, too. +unless `--export-all` was given, too. DESCRIPTION @@ -332,7 +332,7 @@ To get a checkout with the Eclipse CVS client: 3. Browse the 'modules' available. It will give you a list of the heads in the repository. You will not be able to browse the tree from there. Only the heads. -4. Pick 'HEAD' when it asks what branch/tag to check out. Untick the +4. Pick `HEAD` when it asks what branch/tag to check out. Untick the "launch commit wizard" to avoid committing the .project file. Protocol notes: If you are using anonymous access via pserver, just select that. @@ -402,12 +402,12 @@ Exports and tagging (tags and branches) are not supported at this stage. CRLF Line Ending Conversions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -By default the server leaves the '-k' mode blank for all files, +By default the server leaves the `-k` mode blank for all files, which causes the CVS client to treat them as a text files, subject to end-of-line conversion on some platforms. You can make the server use the end-of-line conversion attributes to -set the '-k' modes for files by setting the `gitcvs.usecrlfattr` +set the `-k` modes for files by setting the `gitcvs.usecrlfattr` config variable. See linkgit:gitattributes[5] for more information about end-of-line conversion. @@ -415,9 +415,9 @@ Alternatively, if `gitcvs.usecrlfattr` config is not enabled or the attributes do not allow automatic detection for a filename, then the server uses the `gitcvs.allBinary` config for the default setting. If `gitcvs.allBinary` is set, then file not otherwise -specified will default to '-kb' mode. Otherwise the '-k' mode +specified will default to '-kb' mode. Otherwise the `-k` mode is left blank. But if `gitcvs.allBinary` is set to "guess", then -the correct '-k' mode will be guessed based on the contents of +the correct `-k` mode will be guessed based on the contents of the file. For best consistency with 'cvs', it is probably best to override the diff --git a/Documentation/git-daemon.txt b/Documentation/git-daemon.txt index a69b361..3c91db7 100644 --- a/Documentation/git-daemon.txt +++ b/Documentation/git-daemon.txt @@ -30,7 +30,7 @@ that service if it is enabled. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory that hasn't explicitly been marked -for export this way (unless the '--export-all' parameter is specified). If you +for export this way (unless the `--export-all` parameter is specified). If you pass some directory paths as 'git daemon' arguments, you can further restrict the offers to a whitelist comprising of those. @@ -90,10 +90,10 @@ OPTIONS is not supported, then --listen=hostname is also not supported and --listen must be given an IPv4 address. Can be given more than once. - Incompatible with '--inetd' option. + Incompatible with `--inetd` option. --port=<n>:: - Listen on an alternative port. Incompatible with '--inetd' option. + Listen on an alternative port. Incompatible with `--inetd` option. --init-timeout=<n>:: Timeout (in seconds) between the moment the connection is established @@ -188,7 +188,7 @@ Git configuration files in that directory are readable by `<user>`. arguments. The external command can decide to decline the service by exiting with a non-zero status (or to allow it by exiting with a zero status). It can also look at the $REMOTE_ADDR - and $REMOTE_PORT environment variables to learn about the + and `$REMOTE_PORT` environment variables to learn about the requestor when making this decision. + The external command can optionally write a single line to its @@ -296,7 +296,7 @@ they correspond to these IP addresses. selectively enable/disable services per repository:: To enable 'git archive --remote' and disable 'git fetch' against a repository, have the following in the configuration file in the - repository (that is the file 'config' next to 'HEAD', 'refs' and + repository (that is the file 'config' next to `HEAD`, 'refs' and 'objects'). + ---------------------------------------------------------------- diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt index c8f28c8..26f19d3 100644 --- a/Documentation/git-describe.txt +++ b/Documentation/git-describe.txt @@ -30,9 +30,14 @@ OPTIONS Commit-ish object names to describe. Defaults to HEAD if omitted. --dirty[=<mark>]:: - Describe the working tree. - It means describe HEAD and appends <mark> (`-dirty` by - default) if the working tree is dirty. +--broken[=<mark>]:: + Describe the state of the working tree. When the working + tree matches HEAD, the output is the same as "git describe + HEAD". If the working tree has local modification "-dirty" + is appended to it. If a repository is corrupt and Git + cannot determine if there is local modification, Git will + error out, unless `--broken' is given, which appends + the suffix "-broken" instead. --all:: Instead of using only the annotated tags, use any ref @@ -83,7 +88,20 @@ OPTIONS --match <pattern>:: Only consider tags matching the given `glob(7)` pattern, excluding the "refs/tags/" prefix. This can be used to avoid - leaking private tags from the repository. + leaking private tags from the repository. If given multiple times, a + list of patterns will be accumulated, and tags matching any of the + patterns will be considered. Use `--no-match` to clear and reset the + list of patterns. + +--exclude <pattern>:: + Do not consider tags matching the given `glob(7)` pattern, excluding + the "refs/tags/" prefix. This can be used to narrow the tag space and + find only tags matching some meaningful criteria. If given multiple + times, a list of patterns will be accumulated and tags matching any + of the patterns will be excluded. When combined with --match a tag will + be considered when it matches at least one --match pattern and does not + match any of the --exclude patterns. Use `--no-exclude` to clear and + reset the list of patterns. --always:: Show uniquely abbreviated commit object as fallback. @@ -154,7 +172,7 @@ is found, its name will be output and searching will stop. If an exact match was not found, 'git describe' will walk back through the commit history to locate an ancestor commit which has been tagged. The ancestor's tag will be output along with an -abbreviation of the input commit-ish's SHA-1. If '--first-parent' was +abbreviation of the input commit-ish's SHA-1. If `--first-parent` was specified then the walk will only consider the first parent of each commit. diff --git a/Documentation/git-diff-index.txt b/Documentation/git-diff-index.txt index a86cf62..a171506 100644 --- a/Documentation/git-diff-index.txt +++ b/Documentation/git-diff-index.txt @@ -40,13 +40,13 @@ include::diff-format.txt[] Operating Modes --------------- You can choose whether you want to trust the index file entirely -(using the '--cached' flag) or ask the diff logic to show any files +(using the `--cached` flag) or ask the diff logic to show any files that don't match the stat state as being "tentatively changed". Both of these operations are very useful indeed. Cached Mode ----------- -If '--cached' is specified, it allows you to ask: +If `--cached` is specified, it allows you to ask: show me the differences between HEAD and the current index contents (the ones I'd write using 'git write-tree') diff --git a/Documentation/git-diff-tree.txt b/Documentation/git-diff-tree.txt index 1439486..7870e17 100644 --- a/Documentation/git-diff-tree.txt +++ b/Documentation/git-diff-tree.txt @@ -43,11 +43,11 @@ include::diff-options.txt[] show tree entry itself as well as subtrees. Implies -r. --root:: - When '--root' is specified the initial commit will be shown as a big + When `--root` is specified the initial commit will be shown as a big creation event. This is equivalent to a diff against the NULL tree. --stdin:: - When '--stdin' is specified, the command does not take + When `--stdin` is specified, the command does not take <tree-ish> arguments from the command line. Instead, it reads lines containing either two <tree>, one <commit>, or a list of <commit> from its standard input. (Use a single space @@ -70,13 +70,13 @@ commits (but not trees). By default, 'git diff-tree --stdin' does not show differences for merge commits. With this flag, it shows differences to that commit from all of its parents. See - also '-c'. + also `-c`. -s:: By default, 'git diff-tree --stdin' shows differences, - either in machine-readable form (without '-p') or in patch - form (with '-p'). This output can be suppressed. It is - only useful with '-v' flag. + either in machine-readable form (without `-p`) or in patch + form (with `-p`). This output can be suppressed. It is + only useful with `-v` flag. -v:: This flag causes 'git diff-tree --stdin' to also show @@ -91,17 +91,17 @@ include::pretty-options.txt[] -c:: This flag changes the way a merge commit is displayed (which means it is useful only when the command is given - one <tree-ish>, or '--stdin'). It shows the differences + one <tree-ish>, or `--stdin`). It shows the differences from each of the parents to the merge result simultaneously instead of showing pairwise diff between a parent and the - result one at a time (which is what the '-m' option does). + result one at a time (which is what the `-m` option does). Furthermore, it lists only files which were modified from all parents. --cc:: This flag changes the way a merge commit patch is displayed, - in a similar way to the '-c' option. It implies the '-c' - and '-p' options and further compresses the patch output + in a similar way to the `-c` option. It implies the `-c` + and `-p` options and further compresses the patch output by omitting uninteresting hunks whose the contents in the parents have only two variants and the merge result picks one of them without modification. When all hunks are uninteresting, the commit diff --git a/Documentation/git-difftool.txt b/Documentation/git-difftool.txt index 333cf6f..96c26e6 100644 --- a/Documentation/git-difftool.txt +++ b/Documentation/git-difftool.txt @@ -86,10 +86,11 @@ instead. `--no-symlinks` is the default on Windows. Additionally, `$BASE` is set in the environment. -g:: ---gui:: +--[no-]gui:: When 'git-difftool' is invoked with the `-g` or `--gui` option the default diff tool will be read from the configured - `diff.guitool` variable instead of `diff.tool`. + `diff.guitool` variable instead of `diff.tool`. The `--no-gui` + option can be used to override this setting. --[no-]trust-exit-code:: 'git-difftool' invokes a diff tool individually on each file. @@ -98,7 +99,7 @@ instead. `--no-symlinks` is the default on Windows. invoked diff tool returns a non-zero exit code. + 'git-difftool' will forward the exit code of the invoked tool when -'--trust-exit-code' is used. +`--trust-exit-code` is used. See linkgit:git-diff[1] for the full list of supported options. diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt index 66910aa..2b76265 100644 --- a/Documentation/git-fast-import.txt +++ b/Documentation/git-fast-import.txt @@ -136,6 +136,8 @@ Performance and Compression Tuning Maximum size of each output packfile. The default is unlimited. +fastimport.unpackLimit:: + See linkgit:git-config[1] Performance ----------- @@ -1054,7 +1056,7 @@ relative-marks:: no-relative-marks:: force:: Act as though the corresponding command-line option with - a leading '--' was passed on the command line + a leading `--` was passed on the command line (see OPTIONS, above). import-marks:: @@ -1105,7 +1107,7 @@ options the user may specify to git fast-import itself. The `<option>` part of the command may contain any of the options listed in the OPTIONS section that do not change import semantics, -without the leading '--' and is treated in the same way. +without the leading `--` and is treated in the same way. Option commands must be the first commands on the input (not counting feature commands), to give an option command after any non-option diff --git a/Documentation/git-fetch-pack.txt b/Documentation/git-fetch-pack.txt index 8680f45..f7ebe36 100644 --- a/Documentation/git-fetch-pack.txt +++ b/Documentation/git-fetch-pack.txt @@ -41,13 +41,13 @@ OPTIONS option, then the refs from stdin are processed after those on the command line. + -If '--stateless-rpc' is specified together with this option then +If `--stateless-rpc` is specified together with this option then the list of refs must be in packet format (pkt-line). Each ref must be in a separate packet, and the list must end with a flush packet. -q:: --quiet:: - Pass '-q' flag to 'git unpack-objects'; this makes the + Pass `-q` flag to 'git unpack-objects'; this makes the cloning process less verbose. -k:: @@ -87,6 +87,20 @@ be in a separate packet, and the list must end with a flush packet. 'git-upload-pack' treats the special depth 2147483647 as infinite even if there is an ancestor-chain that long. +--shallow-since=<date>:: + Deepen or shorten the history of a shallow'repository to + include all reachable commits after <date>. + +--shallow-exclude=<revision>:: + Deepen or shorten the history of a shallow repository to + exclude commits reachable from a specified remote branch or tag. + This option can be specified multiple times. + +--deepen-relative:: + Argument --depth specifies the number of commits from the + current shallow boundary instead of from the tip of each + remote branch history. + --no-progress:: Do not show the progress. @@ -104,6 +118,10 @@ be in a separate packet, and the list must end with a flush packet. The remote heads to update from. This is relative to $GIT_DIR (e.g. "HEAD", "refs/heads/master"). When unspecified, update from all heads the remote side has. ++ +If the remote has enabled the options `uploadpack.allowTipSHA1InWant`, +`uploadpack.allowReachableSHA1InWant`, or `uploadpack.allowAnySHA1InWant`, +they may alternatively be 40-hex sha1s present on the remote. SEE ALSO -------- diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt index efe56e0..b153aef 100644 --- a/Documentation/git-fetch.txt +++ b/Documentation/git-fetch.txt @@ -99,6 +99,57 @@ The latter use of the `remote.<repository>.fetch` values can be overridden by giving the `--refmap=<refspec>` parameter(s) on the command line. +OUTPUT +------ + +The output of "git fetch" depends on the transport method used; this +section describes the output when fetching over the Git protocol +(either locally or via ssh) and Smart HTTP protocol. + +The status of the fetch is output in tabular form, with each line +representing the status of a single ref. Each line is of the form: + +------------------------------- + <flag> <summary> <from> -> <to> [<reason>] +------------------------------- + +The status of up-to-date refs is shown only if the --verbose option is +used. + +In compact output mode, specified with configuration variable +fetch.output, if either entire `<from>` or `<to>` is found in the +other string, it will be substituted with `*` in the other string. For +example, `master -> origin/master` becomes `master -> origin/*`. + +flag:: + A single character indicating the status of the ref: +(space);; for a successfully fetched fast-forward; +`+`;; for a successful forced update; +`-`;; for a successfully pruned ref; +`t`;; for a successful tag update; +`*`;; for a successfully fetched new ref; +`!`;; for a ref that was rejected or failed to update; and +`=`;; for a ref that was up to date and did not need fetching. + +summary:: + For a successfully fetched ref, the summary shows the old and new + values of the ref in a form suitable for using as an argument to + `git log` (this is `<old>..<new>` in most cases, and + `<old>...<new>` for forced non-fast-forward updates). + +from:: + The name of the remote ref being fetched from, minus its + `refs/<type>/` prefix. In the case of deletion, the name of + the remote ref is "(none)". + +to:: + The name of the local ref being updated, minus its + `refs/<type>/` prefix. + +reason:: + A human-readable explanation. In the case of successfully fetched + refs, no explanation is needed. For a failed ref, the reason for + failure is described. EXAMPLES -------- @@ -141,6 +192,8 @@ The first command fetches the `maint` branch from the repository at objects will eventually be removed by git's built-in housekeeping (see linkgit:git-gc[1]). +include::transfer-data-leaks.txt[] + BUGS ---- Using --recurse-submodules can only fetch new commits in already checked diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 73fd9e8..6e4bb02 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -52,7 +52,7 @@ if different from the rewritten ones, will be stored in the namespace Note that since this operation is very I/O expensive, it might be a good idea to redirect the temporary directory off-disk with the -'-d' option, e.g. on tmpfs. Reportedly the speedup is very noticeable. +`-d` option, e.g. on tmpfs. Reportedly the speedup is very noticeable. Filters @@ -61,7 +61,7 @@ Filters The filters are applied in the order as listed below. The <command> argument is always evaluated in the shell context using the 'eval' command (with the notable exception of the commit filter, for technical reasons). -Prior to that, the $GIT_COMMIT environment variable will be set to contain +Prior to that, the `$GIT_COMMIT` environment variable will be set to contain the id of the commit being rewritten. Also, GIT_AUTHOR_NAME, GIT_AUTHOR_EMAIL, GIT_AUTHOR_DATE, GIT_COMMITTER_NAME, GIT_COMMITTER_EMAIL, and GIT_COMMITTER_DATE are taken from the current commit and exported to @@ -167,14 +167,12 @@ to other tags will be rewritten to point to the underlying commit. project root. Implies <<Remap_to_ancestor>>. --prune-empty:: - Some kind of filters will generate empty commits, that left the tree - untouched. This switch allow git-filter-branch to ignore such - commits. Though, this switch only applies for commits that have one - and only one parent, it will hence keep merges points. Also, this - option is not compatible with the use of '--commit-filter'. Though you - just need to use the function 'git_commit_non_empty_tree "$@"' instead - of the `git commit-tree "$@"` idiom in your commit filter to make that - happen. + Some filters will generate empty commits that leave the tree untouched. + This option instructs git-filter-branch to remove such commits if they + have exactly one or zero non-pruned parents; merge commits will + therefore remain intact. This option cannot be used together with + `--commit-filter`, though the same effect can be achieved by using the + provided `git_commit_non_empty_tree` function in a commit filter. --original <namespace>:: Use this option to set the namespace where the original commits @@ -197,7 +195,7 @@ to other tags will be rewritten to point to the underlying commit. <rev-list options>...:: Arguments for 'git rev-list'. All positive refs included by these options are rewritten. You may also specify options - such as '--all', but you must use '--' to separate them from + such as `--all`, but you must use `--` to separate them from the 'git filter-branch' options. Implies <<Remap_to_ancestor>>. @@ -205,7 +203,7 @@ to other tags will be rewritten to point to the underlying commit. Remap to ancestor ~~~~~~~~~~~~~~~~~ -By using linkgit:rev-list[1] arguments, e.g., path limiters, you can limit the +By using linkgit:git-rev-list[1] arguments, e.g., path limiters, you can limit the set of revisions which get rewritten. However, positive refs on the command line are distinguished: we don't let them be excluded by such limiters. For this purpose, they are instead rewritten to point at the nearest ancestor that diff --git a/Documentation/git-fmt-merge-msg.txt b/Documentation/git-fmt-merge-msg.txt index 6526b17..44892c4 100644 --- a/Documentation/git-fmt-merge-msg.txt +++ b/Documentation/git-fmt-merge-msg.txt @@ -60,10 +60,10 @@ merge.summary:: EXAMPLE ------- --- +--------- $ git fetch origin master $ git fmt-merge-msg --log <$GIT_DIR/FETCH_HEAD --- +--------- Print a log message describing a merge of the "master" branch from the "origin" remote. diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index c6f073c..03e187a 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -11,7 +11,7 @@ SYNOPSIS 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] [(--sort=<key>)...] [--format=<format>] [<pattern>...] [--points-at <object>] [(--merged | --no-merged) [<object>]] - [--contains [<object>]] + [--contains [<object>]] [--no-contains [<object>]] DESCRIPTION ----------- @@ -69,16 +69,25 @@ OPTIONS --merged [<object>]:: Only list refs whose tips are reachable from the - specified commit (HEAD if not specified). + specified commit (HEAD if not specified), + incompatible with `--no-merged`. --no-merged [<object>]:: Only list refs whose tips are not reachable from the - specified commit (HEAD if not specified). + specified commit (HEAD if not specified), + incompatible with `--merged`. --contains [<object>]:: - Only list tags which contain the specified commit (HEAD if not + Only list refs which contain the specified commit (HEAD if not specified). +--no-contains [<object>]:: + Only list refs which don't contain the specified commit (HEAD + if not specified). + +--ignore-case:: + Sorting and filtering refs are case insensitive. + FIELD NAMES ----------- @@ -92,7 +101,20 @@ refname:: The name of the ref (the part after $GIT_DIR/). For a non-ambiguous short name of the ref append `:short`. The option core.warnAmbiguousRefs is used to select the strict - abbreviation mode. + abbreviation mode. If `lstrip=<N>` (`rstrip=<N>`) is appended, strips `<N>` + slash-separated path components from the front (back) of the refname + (e.g. `%(refname:lstrip=2)` turns `refs/tags/foo` into `foo` and + `%(refname:rstrip=2)` turns `refs/tags/foo` into `refs`). + If `<N>` is a negative number, strip as many path components as + necessary from the specified end to leave `-<N>` path components + (e.g. `%(refname:lstrip=-2)` turns + `refs/tags/foo` into `tags/foo` and `%(refname:rstrip=-1)` + turns `refs/tags/foo` into `refs`). When the ref does not have + enough components, the result becomes an empty string if + stripping with positive <N>, or it becomes the full refname if + stripping with negative <N>. Neither is an error. ++ +`strip` can be used as a synomym to `lstrip`. objecttype:: The type of the object (`blob`, `tree`, `commit`, `tag`). @@ -103,21 +125,31 @@ objectsize:: objectname:: The object name (aka SHA-1). For a non-ambiguous abbreviation of the object name append `:short`. + For an abbreviation of the object name with desired length append + `:short=<length>`, where the minimum length is MINIMUM_ABBREV. The + length may be exceeded to ensure unique object names. upstream:: The name of a local ref which can be considered ``upstream'' - from the displayed ref. Respects `:short` in the same way as - `refname` above. Additionally respects `:track` to show - "[ahead N, behind M]" and `:trackshort` to show the terse - version: ">" (ahead), "<" (behind), "<>" (ahead and behind), - or "=" (in sync). Has no effect if the ref does not have - tracking information associated with it. + from the displayed ref. Respects `:short`, `:lstrip` and + `:rstrip` in the same way as `refname` above. Additionally + respects `:track` to show "[ahead N, behind M]" and + `:trackshort` to show the terse version: ">" (ahead), "<" + (behind), "<>" (ahead and behind), or "=" (in sync). `:track` + also prints "[gone]" whenever unknown upstream ref is + encountered. Append `:track,nobracket` to show tracking + information without brackets (i.e "ahead N, behind M"). Has + no effect if the ref does not have tracking information + associated with it. All the options apart from `nobracket` + are mutually exclusive, but if used together the last option + is selected. push:: - The name of a local ref which represents the `@{push}` location - for the displayed ref. Respects `:short`, `:track`, and - `:trackshort` options as `upstream` does. Produces an empty - string if no `@{push}` ref is configured. + The name of a local ref which represents the `@{push}` + location for the displayed ref. Respects `:short`, `:lstrip`, + `:rstrip`, `:track`, and `:trackshort` options as `upstream` + does. Produces an empty string if no `@{push}` ref is + configured. HEAD:: '*' if HEAD matches current ref (the checked out branch), ' ' @@ -129,19 +161,47 @@ color:: align:: Left-, middle-, or right-align the content between - %(align:...) and %(end). The "align:" is followed by `<width>` - and `<position>` in any order separated by a comma, where the - `<position>` is either left, right or middle, default being - left and `<width>` is the total length of the content with - alignment. If the contents length is more than the width then - no alignment is performed. If used with '--quote' everything - in between %(align:...) and %(end) is quoted, but if nested - then only the topmost level performs quoting. + %(align:...) and %(end). The "align:" is followed by + `width=<width>` and `position=<position>` in any order + separated by a comma, where the `<position>` is either left, + right or middle, default being left and `<width>` is the total + length of the content with alignment. For brevity, the + "width=" and/or "position=" prefixes may be omitted, and bare + <width> and <position> used instead. For instance, + `%(align:<width>,<position>)`. If the contents length is more + than the width then no alignment is performed. If used with + `--quote` everything in between %(align:...) and %(end) is + quoted, but if nested then only the topmost level performs + quoting. + +if:: + Used as %(if)...%(then)...%(end) or + %(if)...%(then)...%(else)...%(end). If there is an atom with + value or string literal after the %(if) then everything after + the %(then) is printed, else if the %(else) atom is used, then + everything after %(else) is printed. We ignore space when + evaluating the string before %(then), this is useful when we + use the %(HEAD) atom which prints either "*" or " " and we + want to apply the 'if' condition only on the 'HEAD' ref. + Append ":equals=<string>" or ":notequals=<string>" to compare + the value between the %(if:...) and %(then) atoms with the + given string. + +symref:: + The ref which the given symbolic ref refers to. If not a + symbolic ref, nothing is printed. Respects the `:short`, + `:lstrip` and `:rstrip` options in the same way as `refname` + above. In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can be used to specify the value in the header field. +For commit and tag objects, the special `creatordate` and `creator` +fields will correspond to the appropriate date or name-email-date tuple +from the `committer` or `tagger` fields depending on the object type. +These are intended for working on a mix of annotated and lightweight tags. + Fields that have name-email-date tuple as its value (`author`, `committer`, and `tagger`) can be suffixed with `name`, `email`, and `date` to extract the named component. @@ -152,9 +212,11 @@ of all lines of the commit message up to the first blank line. The next line is 'contents:body', where body is all of the lines after the first blank line. The optional GPG signature is `contents:signature`. The first `N` lines of the message is obtained using `contents:lines=N`. +Additionally, the trailers as interpreted by linkgit:git-interpret-trailers[1] +are obtained as 'contents:trailers'. -For sorting purposes, fields with numeric values sort in numeric -order (`objectsize`, `authordate`, `committerdate`, `taggerdate`). +For sorting purposes, fields with numeric values sort in numeric order +(`objectsize`, `authordate`, `committerdate`, `creatordate`, `taggerdate`). All other fields are used to sort in their byte-value order. There is also an option to sort by versions, this can be done by using @@ -166,7 +228,15 @@ returns an empty string instead. As a special case for the date-type fields, you may specify a format for the date by adding `:` followed by date format name (see the -values the `--date` option to linkgit::git-rev-list[1] takes). +values the `--date` option to linkgit:git-rev-list[1] takes). + +Some atoms like %(align) and %(if) always require a matching %(end). +We call them "opening atoms" and sometimes denote them as %($open). + +When a scripting language specific quoting is in effect, everything +between a top-level opening atom and its matching %(end) is evaluated +according to the semantics of the opening atom and only its result +from the top-level is quoted. EXAMPLES @@ -255,6 +325,22 @@ eval=`git for-each-ref --shell --format="$fmt" \ eval "$eval" ------------ + +An example to show the usage of %(if)...%(then)...%(else)...%(end). +This prefixes the current branch with a star. + +------------ +git for-each-ref --format="%(if)%(HEAD)%(then)* %(else) %(end)%(refname:short)" refs/heads/ +------------ + + +An example to show the usage of %(if)...%(then)...%(end). +This prints the authorname, if present. + +------------ +git for-each-ref --format="%(refname)%(if)%(authorname)%(then) Authored by: %(authorname)%(end)" +------------ + SEE ALSO -------- linkgit:git-show-ref[1] diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index 4035649..f7a069b 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -19,7 +19,8 @@ SYNOPSIS [--start-number <n>] [--numbered-files] [--in-reply-to=Message-Id] [--suffix=.<sfx>] [--ignore-if-in-upstream] - [--subject-prefix=Subject-Prefix] [(--reroll-count|-v) <n>] + [--rfc] [--subject-prefix=Subject-Prefix] + [(--reroll-count|-v) <n>] [--to=<email>] [--cc=<email>] [--[no-]cover-letter] [--quiet] [--notes[=<ref>]] [<common diff options>] @@ -57,7 +58,11 @@ The names of the output files are printed to standard output, unless the `--stdout` option is specified. If `-o` is specified, output files are created in <dir>. Otherwise -they are created in the current working directory. +they are created in the current working directory. The default path +can be set with the `format.outputDirectory` configuration option. +The `-o` option takes precedence over `format.outputDirectory`. +To store patches in the current working directory even when +`format.outputDirectory` points elsewhere, use `-o .`. By default, the subject of a single patch is "[PATCH] " followed by the concatenation of lines from the commit message up to the first blank @@ -109,6 +114,7 @@ include::diff-options.txt[] --signoff:: Add `Signed-off-by:` line to the commit message, using the committer identity of yourself. + See the signoff option in linkgit:git-commit[1] for more information. --stdout:: Print all commits to the standard output in mbox format, @@ -141,9 +147,9 @@ series, where the head is chosen from the cover letter, the `--in-reply-to`, and the first patch mail, in this order. 'deep' threading makes every mail a reply to the previous one. + -The default is `--no-thread`, unless the 'format.thread' configuration +The default is `--no-thread`, unless the `format.thread` configuration is set. If `--thread` is specified without a style, it defaults to the -style specified by 'format.thread' if any, or else `shallow`. +style specified by `format.thread` if any, or else `shallow`. + Beware that the default for 'git send-email' is to thread emails itself. If you want `git format-patch` to take care of threading, you @@ -167,6 +173,11 @@ will want to ensure that threading is disabled for `git send-email`. allows for useful naming of a patch series, and can be combined with the `--numbered` option. +--rfc:: + Alias for `--subject-prefix="RFC PATCH"`. RFC means "Request For + Comments"; use this when sending an experimental patch for + discussion rather than application. + -v <n>:: --reroll-count=<n>:: Mark the series as the <n>-th iteration of the topic. The @@ -228,7 +239,7 @@ keeping them as Git notes allows them to be maintained between versions of the patch series (but see the discussion of the `notes.rewrite` configuration options in linkgit:git-notes[1] to use this workflow). ---[no]-signature=<signature>:: +--[no-]signature=<signature>:: Add a signature to each message produced. Per RFC 3676 the signature is separated from the body by a line with '-- ' on it. If the signature option is omitted the signature defaults to the Git version @@ -256,6 +267,15 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`. using this option cannot be applied properly, but they are still useful for code review. +--zero-commit:: + Output an all-zero hash in each patch's From header instead + of the hash of the commit. + +--base=<commit>:: + Record the base tree information to identify the state the + patch series applies to. See the BASE TREE INFORMATION section + below for details. + --root:: Treat the revision argument as a <revision range>, even if it is just a single commit (that would normally be treated as a @@ -511,6 +531,61 @@ This should help you to submit patches inline using KMail. 5. Back in the compose window: add whatever other text you wish to the message, complete the addressing and subject fields, and press send. +BASE TREE INFORMATION +--------------------- + +The base tree information block is used for maintainers or third party +testers to know the exact state the patch series applies to. It consists +of the 'base commit', which is a well-known commit that is part of the +stable part of the project history everybody else works off of, and zero +or more 'prerequisite patches', which are well-known patches in flight +that is not yet part of the 'base commit' that need to be applied on top +of 'base commit' in topological order before the patches can be applied. + +The 'base commit' is shown as "base-commit: " followed by the 40-hex of +the commit object name. A 'prerequisite patch' is shown as +"prerequisite-patch-id: " followed by the 40-hex 'patch id', which can +be obtained by passing the patch through the `git patch-id --stable` +command. + +Imagine that on top of the public commit P, you applied well-known +patches X, Y and Z from somebody else, and then built your three-patch +series A, B, C, the history would be like: + +................................................ +---P---X---Y---Z---A---B---C +................................................ + +With `git format-patch --base=P -3 C` (or variants thereof, e.g. with +`--cover-letter` of using `Z..C` instead of `-3 C` to specify the +range), the base tree information block is shown at the end of the +first message the command outputs (either the first patch, or the +cover letter), like this: + +------------ +base-commit: P +prerequisite-patch-id: X +prerequisite-patch-id: Y +prerequisite-patch-id: Z +------------ + +For non-linear topology, such as + +................................................ +---P---X---A---M---C + \ / + Y---Z---B +................................................ + +You can also use `git format-patch --base=P -3 C` to generate patches +for A, B and C, and the identifiers for P, X, Y, Z are appended at the +end of the first message. + +If set `--base=auto` in cmdline, it will track base commit automatically, +the base commit will be the merge base of tip commit of the remote-tracking +branch and revision-range specified in cmdline. +For a local branch, you need to track a remote branch by `git branch +--set-upstream-to` before using this option. EXAMPLES -------- diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt index 84ee92e..b9f060e 100644 --- a/Documentation/git-fsck.txt +++ b/Documentation/git-fsck.txt @@ -11,7 +11,8 @@ SYNOPSIS [verse] 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs] [--[no-]full] [--strict] [--verbose] [--lost-found] - [--[no-]dangling] [--[no-]progress] [--connectivity-only] [<object>*] + [--[no-]dangling] [--[no-]progress] [--connectivity-only] + [--[no-]name-objects] [<object>*] DESCRIPTION ----------- @@ -82,6 +83,12 @@ index file, all SHA-1 references in `refs` namespace, and all reflogs a blob, the contents are written into the file, rather than its object name. +--name-objects:: + When displaying names of reachable objects, in addition to the + SHA-1 also display a name that describes *how* they are reachable, + compatible with linkgit:git-rev-parse[1], e.g. + `HEAD@{1234567890}~25^2:src/`. + --[no-]progress:: Progress status is reported on the standard error stream by default when it is attached to a terminal, unless @@ -95,7 +102,7 @@ DISCUSSION git-fsck tests SHA-1 and general object sanity, and it does full tracking of the resulting reachability and everything else. It prints out any corruption it finds (missing or bad objects), and if you use the -'--unreachable' flag it will also print out objects that exist but that +`--unreachable` flag it will also print out objects that exist but that aren't reachable from any of the specified head nodes (or the default set, as mentioned above). diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt index fa15104..571b5a7 100644 --- a/Documentation/git-gc.txt +++ b/Documentation/git-gc.txt @@ -63,11 +63,10 @@ automatic consolidation of packs. --prune=<date>:: Prune loose objects older than date (default is 2 weeks ago, overridable by the config variable `gc.pruneExpire`). - --prune=all prunes loose objects regardless of their age (do - not use --prune=all unless you know exactly what you are doing. - Unless the repository is quiescent, you will lose newly created - objects that haven't been anchored with the refs and end up - corrupting your repository). --prune is on by default. + --prune=all prunes loose objects regardless of their age and + increases the risk of corruption if another process is writing to + the repository concurrently; see "NOTES" below. --prune is on by + default. --no-prune:: Do not prune any loose objects. @@ -82,13 +81,13 @@ automatic consolidation of packs. Configuration ------------- -The optional configuration variable 'gc.reflogExpire' can be +The optional configuration variable `gc.reflogExpire` can be set to indicate how long historical entries within each branch's reflog should remain available in this repository. The setting is expressed as a length of time, for example '90 days' or '3 months'. It defaults to '90 days'. -The optional configuration variable 'gc.reflogExpireUnreachable' +The optional configuration variable `gc.reflogExpireUnreachable` can be set to indicate how long historical reflog entries which are not part of the current branch should remain available in this repository. These types of entries are generally created as @@ -107,30 +106,30 @@ branches: reflogExpireUnreachable = 3 days ------------ -The optional configuration variable 'gc.rerereResolved' indicates +The optional configuration variable `gc.rerereResolved` indicates how long records of conflicted merge you resolved earlier are kept. This defaults to 60 days. -The optional configuration variable 'gc.rerereUnresolved' indicates +The optional configuration variable `gc.rerereUnresolved` indicates how long records of conflicted merge you have not resolved are kept. This defaults to 15 days. -The optional configuration variable 'gc.packRefs' determines if +The optional configuration variable `gc.packRefs` determines if 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable it within all non-bare repos or it can be set to a boolean value. This defaults to true. -The optional configuration variable 'gc.aggressiveWindow' controls how +The optional configuration variable `gc.aggressiveWindow` controls how much time is spent optimizing the delta compression of the objects in the repository when the --aggressive option is specified. The larger the value, the more time is spent optimizing the delta compression. See the documentation for the --window' option in linkgit:git-repack[1] for more details. This defaults to 250. -Similarly, the optional configuration variable 'gc.aggressiveDepth' -controls --depth option in linkgit:git-repack[1]. This defaults to 250. +Similarly, the optional configuration variable `gc.aggressiveDepth` +controls --depth option in linkgit:git-repack[1]. This defaults to 50. -The optional configuration variable 'gc.pruneExpire' controls how old +The optional configuration variable `gc.pruneExpire` controls how old the unreferenced loose objects have to be before they are pruned. The default is "2 weeks ago". @@ -138,17 +137,36 @@ default is "2 weeks ago". Notes ----- -'git gc' tries very hard to be safe about the garbage it collects. In +'git gc' tries very hard not to delete objects that are referenced +anywhere in your repository. In particular, it will keep not only objects referenced by your current set of branches and tags, but also objects referenced by the index, remote-tracking branches, refs saved by 'git filter-branch' in refs/original/, or reflogs (which may reference commits in branches that were later amended or rewound). - -If you are expecting some objects to be collected and they aren't, check +If you are expecting some objects to be deleted and they aren't, check all of those locations and decide whether it makes sense in your case to remove those references. +On the other hand, when 'git gc' runs concurrently with another process, +there is a risk of it deleting an object that the other process is using +but hasn't created a reference to. This may just cause the other process +to fail or may corrupt the repository if the other process later adds a +reference to the deleted object. Git has two features that significantly +mitigate this problem: + +. Any object with modification time newer than the `--prune` date is kept, + along with everything reachable from it. + +. Most operations that add an object to the database update the + modification time of the object if it is already present so that #1 + applies. + +However, these features fall short of a complete solution, so users who +run commands concurrently have to live with some risk of corruption (which +seems to be low in practice) unless they turn off automatic garbage +collection with 'git config gc.auto 0'. + HOOKS ----- diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt index 4a44d6d..71f32f3 100644 --- a/Documentation/git-grep.txt +++ b/Documentation/git-grep.txt @@ -23,8 +23,10 @@ SYNOPSIS [--break] [--heading] [-p | --show-function] [-A <post-context>] [-B <pre-context>] [-C <context>] [-W | --function-context] + [--threads <num>] [-f <file>] [-e] <pattern> [--and|--or|--not|(|)|-e <pattern>...] + [--recurse-submodules] [--parent-basename <basename>] [ [--[no-]exclude-standard] [--cached | --no-index | --untracked] | <tree>...] [--] [<pathspec>...] @@ -40,21 +42,29 @@ CONFIGURATION ------------- grep.lineNumber:: - If set to true, enable '-n' option by default. + If set to true, enable `-n` option by default. grep.patternType:: Set the default matching behavior. Using a value of 'basic', 'extended', - 'fixed', or 'perl' will enable the '--basic-regexp', '--extended-regexp', - '--fixed-strings', or '--perl-regexp' option accordingly, while the + 'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`, + `--fixed-strings`, or `--perl-regexp` option accordingly, while the value 'default' will return to the default matching behavior. grep.extendedRegexp:: - If set to true, enable '--extended-regexp' option by default. This - option is ignored when the 'grep.patternType' option is set to a value + If set to true, enable `--extended-regexp` option by default. This + option is ignored when the `grep.patternType` option is set to a value other than 'default'. +grep.threads:: + Number of grep worker threads to use. If unset (or set to 0), + 8 threads are used by default (for now). + grep.fullName:: - If set to true, enable '--full-name' option by default. + If set to true, enable `--full-name` option by default. + +grep.fallbackToNoIndex:: + If set to true, fall back to git grep --no-index if git grep + is executed outside of a git repository. Defaults to false. OPTIONS @@ -79,6 +89,19 @@ OPTIONS mechanism. Only useful when searching files in the current directory with `--no-index`. +--recurse-submodules:: + Recursively search in each submodule that has been initialized and + checked out in the repository. When used in combination with the + <tree> option the prefix of all submodule output will be the name of + the parent project's <tree> object. + +--parent-basename <basename>:: + For internal use only. In order to produce uniform output with the + --recurse-submodules option, this option can be used to provide the + basename of a parent's <tree> object to a submodule so the submodule + can prefix its output with the parent's name rather than the SHA1 of + the submodule. + -a:: --text:: Process binary files as if they were text. @@ -227,6 +250,10 @@ OPTIONS effectively showing the whole function in which the match was found. +--threads <num>:: + Number of grep worker threads to use. + See `grep.threads` in 'CONFIGURATION' for more information. + -f <file>:: Read patterns from <file>, one per line. diff --git a/Documentation/git-gui.txt b/Documentation/git-gui.txt index 8144527..5f93f80 100644 --- a/Documentation/git-gui.txt +++ b/Documentation/git-gui.txt @@ -35,7 +35,7 @@ blame:: browser:: Start a tree browser showing all files in the specified - commit (or 'HEAD' by default). Files selected through the + commit. Files selected through the browser are opened in the blame viewer. citool:: diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt index 3956525..40d328a 100644 --- a/Documentation/git-help.txt +++ b/Documentation/git-help.txt @@ -18,10 +18,10 @@ With no options and no COMMAND or GUIDE given, the synopsis of the 'git' command and a list of the most commonly used Git commands are printed on the standard output. -If the option '--all' or '-a' is given, all available commands are +If the option `--all` or `-a` is given, all available commands are printed on the standard output. -If the option '--guide' or '-g' is given, a list of the useful +If the option `--guide` or `-g` is given, a list of the useful Git guides is also printed on the standard output. If a command, or a guide, is given, a manual page for that command or @@ -57,10 +57,10 @@ OPTIONS --man:: Display manual page for the command in the 'man' format. This option may be used to override a value set in the - 'help.format' configuration variable. + `help.format` configuration variable. + By default the 'man' program will be used to display the manual page, -but the 'man.viewer' configuration variable may be used to choose +but the `man.viewer` configuration variable may be used to choose other display programs (see below). -w:: @@ -69,7 +69,7 @@ other display programs (see below). format. A web browser will be used for that purpose. + The web browser can be specified using the configuration variable -'help.browser', or 'web.browser' if the former is not set. If none of +`help.browser`, or `web.browser` if the former is not set. If none of these config variables is set, the 'git web{litdd}browse' helper script (called by 'git help') will pick a suitable default. See linkgit:git-web{litdd}browse[1] for more information about this. @@ -80,7 +80,7 @@ CONFIGURATION VARIABLES help.format ~~~~~~~~~~~ -If no command-line option is passed, the 'help.format' configuration +If no command-line option is passed, the `help.format` configuration variable will be checked. The following values are supported for this variable; they make 'git help' behave as their corresponding command- line option: @@ -92,7 +92,7 @@ line option: help.browser, web.browser and browser.<tool>.path ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The 'help.browser', 'web.browser' and 'browser.<tool>.path' will also +The `help.browser`, `web.browser` and `browser.<tool>.path` will also be checked if the 'web' format is chosen (either by command-line option or configuration variable). See '-w|--web' in the OPTIONS section above and linkgit:git-web{litdd}browse[1]. @@ -100,7 +100,7 @@ section above and linkgit:git-web{litdd}browse[1]. man.viewer ~~~~~~~~~~ -The 'man.viewer' configuration variable will be checked if the 'man' +The `man.viewer` configuration variable will be checked if the 'man' format is chosen. The following values are currently supported: * "man": use the 'man' program as usual, @@ -110,9 +110,9 @@ format is chosen. The following values are currently supported: tab (see 'Note about konqueror' below). Values for other tools can be used if there is a corresponding -'man.<tool>.cmd' configuration entry (see below). +`man.<tool>.cmd` configuration entry (see below). -Multiple values may be given to the 'man.viewer' configuration +Multiple values may be given to the `man.viewer` configuration variable. Their corresponding programs will be tried in the order listed in the configuration file. @@ -128,14 +128,14 @@ will try to use konqueror first. But this may fail (for example, if DISPLAY is not set) and in that case emacs' woman mode will be tried. If everything fails, or if no viewer is configured, the viewer specified -in the GIT_MAN_VIEWER environment variable will be tried. If that +in the `GIT_MAN_VIEWER` environment variable will be tried. If that fails too, the 'man' program will be tried anyway. man.<tool>.path ~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred man viewer by -setting the configuration variable 'man.<tool>.path'. For example, you +setting the configuration variable `man.<tool>.path`. For example, you can configure the absolute path to konqueror by setting 'man.konqueror.path'. Otherwise, 'git help' assumes the tool is available in PATH. @@ -143,9 +143,9 @@ available in PATH. man.<tool>.cmd ~~~~~~~~~~~~~~ -When the man viewer, specified by the 'man.viewer' configuration +When the man viewer, specified by the `man.viewer` configuration variables, is not among the supported ones, then the corresponding -'man.<tool>.cmd' configuration variable will be looked up. If this +`man.<tool>.cmd` configuration variable will be looked up. If this variable exists then the specified tool will be treated as a custom command and a shell eval will be used to run the command with the man page passed as arguments. @@ -153,7 +153,7 @@ page passed as arguments. Note about konqueror ~~~~~~~~~~~~~~~~~~~~ -When 'konqueror' is specified in the 'man.viewer' configuration +When 'konqueror' is specified in the `man.viewer` configuration variable, we launch 'kfmclient' to try to open the man page on an already opened konqueror in a new tab if possible. @@ -176,7 +176,7 @@ Note about git config --global ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Note that all these configuration variables should probably be set -using the '--global' flag, for example like this: +using the `--global` flag, for example like this: ------------------------------------------------ $ git config --global help.format web diff --git a/Documentation/git-http-backend.txt b/Documentation/git-http-backend.txt index 9268fb6..bb0db19 100644 --- a/Documentation/git-http-backend.txt +++ b/Documentation/git-http-backend.txt @@ -21,7 +21,7 @@ pushing using the smart HTTP protocol. It verifies that the directory has the magic file "git-daemon-export-ok", and it will refuse to export any Git directory that hasn't explicitly been marked for export this way (unless the -GIT_HTTP_EXPORT_ALL environmental variable is set). +`GIT_HTTP_EXPORT_ALL` environmental variable is set). By default, only the `upload-pack` service is enabled, which serves 'git fetch-pack' and 'git ls-remote' clients, which are invoked from @@ -241,7 +241,7 @@ $HTTP["url"] =~ "^/git/private" { ENVIRONMENT ----------- -'git http-backend' relies upon the CGI environment variables set +'git http-backend' relies upon the `CGI` environment variables set by the invoking web server, including: * PATH_INFO (if GIT_PROJECT_ROOT is set, otherwise PATH_TRANSLATED) @@ -251,7 +251,7 @@ by the invoking web server, including: * QUERY_STRING * REQUEST_METHOD -The GIT_HTTP_EXPORT_ALL environmental variable may be passed to +The `GIT_HTTP_EXPORT_ALL` environmental variable may be passed to 'git-http-backend' to bypass the check for the "git-daemon-export-ok" file in each repository before allowing export of that repository. @@ -269,7 +269,7 @@ GIT_COMMITTER_EMAIL to '$\{REMOTE_USER}@http.$\{REMOTE_ADDR\}', ensuring that any reflogs created by 'git-receive-pack' contain some identifying information of the remote user who performed the push. -All CGI environment variables are available to each of the hooks +All `CGI` environment variables are available to each of the hooks invoked by the 'git-receive-pack'. GIT diff --git a/Documentation/git-http-push.txt b/Documentation/git-http-push.txt index 2e67362..2aceb6f 100644 --- a/Documentation/git-http-push.txt +++ b/Documentation/git-http-push.txt @@ -81,13 +81,13 @@ destination side. exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. -Without '--force', the <src> ref is stored at the remote only if +Without `--force`, the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast-forward check is disabled for all refs. +With `--force`, the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-index-pack.txt b/Documentation/git-index-pack.txt index 7a4e055..1b4b65d 100644 --- a/Documentation/git-index-pack.txt +++ b/Documentation/git-index-pack.txt @@ -87,6 +87,8 @@ OPTIONS Specifying 0 will cause Git to auto-detect the number of CPU's and use maximum 3 threads. +--max-input-size=<size>:: + Die, if the pack is larger than <size>. Note ---- diff --git a/Documentation/git-init.txt b/Documentation/git-init.txt index 8174d27..3c5a67f 100644 --- a/Documentation/git-init.txt +++ b/Documentation/git-init.txt @@ -47,7 +47,7 @@ Only print error and warning messages; all other output will be suppressed. --bare:: -Create a bare repository. If GIT_DIR environment is not set, it is set to the +Create a bare repository. If `GIT_DIR` environment is not set, it is set to the current working directory. --template=<template_directory>:: @@ -116,8 +116,8 @@ does not exist, it will be created. TEMPLATE DIRECTORY ------------------ -The template directory contains files and directories that will be copied to -the `$GIT_DIR` after it is created. +Files and directories in the template directory whose name do not start with a +dot will be copied to the `$GIT_DIR` after it is created. The template directory will be one of the following (in order): @@ -130,7 +130,12 @@ The template directory will be one of the following (in order): - the default template directory: `/usr/share/git-core/templates`. The default template directory includes some directory structure, suggested -"exclude patterns" (see linkgit:gitignore[5]), and sample hook files (see linkgit:githooks[5]). +"exclude patterns" (see linkgit:gitignore[5]), and sample hook files. + +The sample hooks are all disabled by default, To enable one of the +sample hooks rename it by removing its `.sample` suffix. + +See linkgit:githooks[5] for more general info on hook execution. EXAMPLES -------- diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt index cc75b25..e8ecdbf 100644 --- a/Documentation/git-instaweb.txt +++ b/Documentation/git-instaweb.txt @@ -80,8 +80,8 @@ You may specify configuration in your .git/config ----------------------------------------------------------------------- -If the configuration variable 'instaweb.browser' is not set, -'web.browser' will be used instead if it is defined. See +If the configuration variable `instaweb.browser` is not set, +`web.browser` will be used instead if it is defined. See linkgit:git-web{litdd}browse[1] for more information about this. SEE ALSO diff --git a/Documentation/git-interpret-trailers.txt b/Documentation/git-interpret-trailers.txt index 0ecd497..09074c7 100644 --- a/Documentation/git-interpret-trailers.txt +++ b/Documentation/git-interpret-trailers.txt @@ -8,7 +8,7 @@ git-interpret-trailers - help add structured information into commit messages SYNOPSIS -------- [verse] -'git interpret-trailers' [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] +'git interpret-trailers' [--in-place] [--trim-empty] [(--trailer <token>[(=|:)<value>])...] [<file>...] DESCRIPTION ----------- @@ -48,22 +48,28 @@ with only spaces at the end of the commit message part, one blank line will be added before the new trailer. Existing trailers are extracted from the input message by looking for -a group of one or more lines that contain a colon (by default), where -the group is preceded by one or more empty (or whitespace-only) lines. +a group of one or more lines that (i) are all trailers, or (ii) contains at +least one Git-generated or user-configured trailer and consists of at +least 25% trailers. +The group must be preceded by one or more empty (or whitespace-only) lines. The group must either be at the end of the message or be the last non-whitespace lines before a line that starts with '---'. Such three minus signs start the patch part of the message. -When reading trailers, there can be whitespaces before and after the +When reading trailers, there can be whitespaces after the token, the separator and the value. There can also be whitespaces -inside the token and the value. +inside the token and the value. The value may be split over multiple lines with +each subsequent line starting with whitespace, like the "folding" in RFC 822. Note that 'trailers' do not follow and are not intended to follow many -rules for RFC 822 headers. For example they do not follow the line -folding rules, the encoding rules and probably many other rules. +rules for RFC 822 headers. For example they do not follow +the encoding rules and probably many other rules. OPTIONS ------- +--in-place:: + Edit the files in place. + --trim-empty:: If the <value> part of any trailer contains only whitespace, the whole trailer will be removed from the resulting message. @@ -216,6 +222,25 @@ Signed-off-by: Alice <alice@example.com> Signed-off-by: Bob <bob@example.com> ------------ +* Use the `--in-place` option to edit a message file in place: ++ +------------ +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt +$ cat msg.txt +subject + +message + +Signed-off-by: Bob <bob@example.com> +Acked-by: Alice <alice@example.com> +------------ + * Extract the last commit as a patch, and add a 'Cc' and a 'Reviewed-by' trailer to it: + diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt index 03f9580..32246fd 100644 --- a/Documentation/git-log.txt +++ b/Documentation/git-log.txt @@ -29,12 +29,14 @@ OPTIONS (works only for a single file). --no-decorate:: ---decorate[=short|full|no]:: +--decorate[=short|full|auto|no]:: Print out the ref names of any commits that are shown. If 'short' is specified, the ref name prefixes 'refs/heads/', 'refs/tags/' and 'refs/remotes/' will not be printed. If 'full' is specified, the - full ref name (including prefix) will be printed. The default option - is 'short'. + full ref name (including prefix) will be printed. If 'auto' is + specified, then if the output is going to a terminal, the ref names + are shown as if 'short' were given, otherwise no ref names are + shown. The default option is 'short'. --source:: Print out the ref name given on the command line by which each @@ -196,12 +198,16 @@ log.showRoot:: `git log -p` output would be shown without a diff attached. The default is `true`. +log.showSignature:: + If `true`, `git log` and related commands will act as if the + `--show-signature` option was passed to them. + mailmap.*:: See linkgit:git-shortlog[1]. notes.displayRef:: Which refs, in addition to the default set by `core.notesRef` - or 'GIT_NOTES_REF', to read notes from when showing commit + or `GIT_NOTES_REF`, to read notes from when showing commit messages with the `log` family of commands. See linkgit:git-notes[1]. + @@ -210,7 +216,7 @@ multiple times. A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. + This setting can be disabled by the `--no-notes` option, -overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable, +overridden by the `GIT_NOTES_DISPLAY_REF` environment variable, and overridden by the `--notes=<ref>` option. GIT diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt index e26f01f..1cab703 100644 --- a/Documentation/git-ls-files.txt +++ b/Documentation/git-ls-files.txt @@ -12,12 +12,14 @@ SYNOPSIS 'git ls-files' [-z] [-t] [-v] (--[cached|deleted|others|ignored|stage|unmerged|killed|modified])* (-[c|d|o|i|s|u|k|m])* + [--eol] [-x <pattern>|--exclude=<pattern>] [-X <file>|--exclude-from=<file>] [--exclude-per-directory=<file>] [--exclude-standard] [--error-unmatch] [--with-tree=<tree-ish>] - [--full-name] [--abbrev] [--] [<file>...] + [--full-name] [--recurse-submodules] + [--abbrev] [--] [<file>...] DESCRIPTION ----------- @@ -75,7 +77,8 @@ OPTIONS succeed. -z:: - \0 line termination on output. + \0 line termination on output and do not quote filenames. + See OUTPUT below for more information. -x <pattern>:: --exclude=<pattern>:: @@ -136,6 +139,10 @@ a space) at the start of each line: option forces paths to be output relative to the project top directory. +--recurse-submodules:: + Recursively calls ls-files on each submodule in the repository. + Currently there is only support for the --cached mode. + --abbrev[=<n>]:: Instead of showing the full 40-byte hexadecimal object lines, show only a partial prefix. @@ -147,6 +154,23 @@ a space) at the start of each line: possible for manual inspection; the exact format may change at any time. +--eol:: + Show <eolinfo> and <eolattr> of files. + <eolinfo> is the file content identification used by Git when + the "text" attribute is "auto" (or not set and core.autocrlf is not false). + <eolinfo> is either "-text", "none", "lf", "crlf", "mixed" or "". ++ +"" means the file is not a regular file, it is not in the index or +not accessible in the working tree. ++ +<eolattr> is the attribute that is used when checking out or committing, +it is either "", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf". +Since Git 2.10 "text=auto eol=lf" and "text=auto eol=crlf" are supported. ++ +Both the <eolinfo> in the index ("i/<eolinfo>") +and in the working tree ("w/<eolinfo>") are shown for regular files, +followed by the ("attr/<eolattr>"). + \--:: Do not interpret any more arguments as options. @@ -156,11 +180,14 @@ a space) at the start of each line: Output ------ -'git ls-files' just outputs the filenames unless '--stage' is specified in +'git ls-files' just outputs the filenames unless `--stage` is specified in which case it outputs: [<tag> ]<mode> <object> <stage> <file> +'git ls-files --eol' will show + i/<eolinfo><SPACES>w/<eolinfo><SPACES>attr/<eolattr><SPACE*><TAB><file> + 'git ls-files --unmerged' and 'git ls-files --stage' can be used to examine detailed information on unmerged paths. @@ -170,9 +197,10 @@ the index records up to three such pairs; one from tree O in stage the user (or the porcelain) to see what should eventually be recorded at the path. (see linkgit:git-read-tree[1] for more information on state) -When `-z` option is not used, TAB, LF, and backslash characters -in pathnames are represented as `\t`, `\n`, and `\\`, -respectively. +Without the `-z` option, pathnames with "unusual" characters are +quoted as explained for the configuration variable `core.quotePath` +(see linkgit:git-config[1]). Using `-z` the filename is output +verbatim and the line is terminated by a NUL byte. Exclude Patterns diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt index d510c05..5f2628c 100644 --- a/Documentation/git-ls-remote.txt +++ b/Documentation/git-ls-remote.txt @@ -9,8 +9,9 @@ git-ls-remote - List references in a remote repository SYNOPSIS -------- [verse] -'git ls-remote' [--heads] [--tags] [--upload-pack=<exec>] - [--exit-code] <repository> [<refs>...] +'git ls-remote' [--heads] [--tags] [--refs] [--upload-pack=<exec>] + [-q | --quiet] [--exit-code] [--get-url] + [--symref] [<repository> [<refs>...]] DESCRIPTION ----------- @@ -29,6 +30,13 @@ OPTIONS both, references stored in refs/heads and refs/tags are displayed. +--refs:: + Do not show peeled tags or pseudorefs like HEAD in the output. + +-q:: +--quiet:: + Do not print remote URL to stderr. + --upload-pack=<exec>:: Specify the full path of 'git-upload-pack' on the remote host. This allows listing references from repositories accessed via @@ -46,6 +54,12 @@ OPTIONS "url.<base>.insteadOf" config setting (See linkgit:git-config[1]) and exit without talking to the remote. +--symref:: + In addition to the object pointed by it, show the underlying + ref pointed by it when showing a symbolic ref. Currently, + upload-pack only shows the symref HEAD, so it will be the only + one shown by ls-remote. + <repository>:: The "remote" repository to query. This parameter can be either a URL or the name of a remote (see the GIT URLS and diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt index 16e87fd..9dee7be 100644 --- a/Documentation/git-ls-tree.txt +++ b/Documentation/git-ls-tree.txt @@ -20,16 +20,16 @@ in the current working directory. Note that: - the behaviour is slightly different from that of "/bin/ls" in that the '<path>' denotes just a list of patterns to match, e.g. so specifying - directory name (without '-r') will behave differently, and order of the + directory name (without `-r`) will behave differently, and order of the arguments does not matter. - the behaviour is similar to that of "/bin/ls" in that the '<path>' is taken as relative to the current working directory. E.g. when you are in a directory 'sub' that has a directory 'dir', you can run 'git ls-tree -r HEAD dir' to list the contents of the tree (that is - 'sub/dir' in 'HEAD'). You don't want to give a tree that is not at the + 'sub/dir' in `HEAD`). You don't want to give a tree that is not at the root level (e.g. `git ls-tree -r HEAD:sub dir`) in this case, as that - would result in asking for 'sub/sub/dir' in the 'HEAD' commit. + would result in asking for 'sub/sub/dir' in the `HEAD` commit. However, the current working directory can be ignored by passing --full-tree option. @@ -46,14 +46,15 @@ OPTIONS -t:: Show tree entries even when going to recurse them. Has no effect - if '-r' was not passed. '-d' implies '-t'. + if `-r` was not passed. `-d` implies `-t`. -l:: --long:: Show object size of blob (file) entries. -z:: - \0 line termination on output. + \0 line termination on output and do not quote filenames. + See OUTPUT FORMAT below for more information. --name-only:: --name-status:: @@ -82,8 +83,6 @@ Output Format ------------- <mode> SP <type> SP <object> TAB <file> -Unless the `-z` option is used, TAB, LF, and backslash characters -in pathnames are represented as `\t`, `\n`, and `\\`, respectively. This output format is compatible with what `--index-info --stdin` of 'git update-index' expects. @@ -95,6 +94,11 @@ Object size identified by <object> is given in bytes, and right-justified with minimum width of 7 characters. Object size is given only for blobs (file) entries; for other entries `-` character is used in place of size. +Without the `-z` option, pathnames with "unusual" characters are +quoted as explained for the configuration variable `core.quotePath` +(see linkgit:git-config[1]). Using `-z` the filename is output +verbatim and the line is terminated by a NUL byte. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-mailinfo.txt b/Documentation/git-mailinfo.txt index 0947084..3bbc731 100644 --- a/Documentation/git-mailinfo.txt +++ b/Documentation/git-mailinfo.txt @@ -85,7 +85,7 @@ with comments and suggestions on the message you are responding to, and to conclude it with a patch submission, separating the discussion and the beginning of the proposed commit log message with a scissors line. + -This can enabled by default with the configuration option mailinfo.scissors. +This can be enabled by default with the configuration option mailinfo.scissors. --no-scissors:: Ignore scissors lines. Useful for overriding mailinfo.scissors settings. diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt index 4d1b871..e3b2a88 100644 --- a/Documentation/git-mailsplit.txt +++ b/Documentation/git-mailsplit.txt @@ -8,7 +8,8 @@ git-mailsplit - Simple UNIX mbox splitter program SYNOPSIS -------- [verse] -'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [(<mbox>|<Maildir>)...] +'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] [--mboxrd] + -o<directory> [--] [(<mbox>|<Maildir>)...] DESCRIPTION ----------- @@ -47,6 +48,10 @@ OPTIONS --keep-cr:: Do not remove `\r` from lines ending with `\r\n`. +--mboxrd:: + Input is of the "mboxrd" format and "^>+From " line escaping is + reversed. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-merge-base.txt b/Documentation/git-merge-base.txt index 808426f..b968b64 100644 --- a/Documentation/git-merge-base.txt +++ b/Documentation/git-merge-base.txt @@ -80,8 +80,8 @@ which is reachable from both 'A' and 'B' through the parent relationship. For example, with this topology: - o---o---o---B - / + o---o---o---B + / ---o---1---o---o---o---A the merge base between 'A' and 'B' is '1'. @@ -116,11 +116,11 @@ the best common ancestor of all commits. When the history involves criss-cross merges, there can be more than one 'best' common ancestor for two commits. For example, with this topology: - ---1---o---A - \ / - X - / \ - ---2---o---o---B + ---1---o---A + \ / + X + / \ + ---2---o---o---B both '1' and '2' are merge-bases of A and B. Neither one is better than the other (both are 'best' merge bases). When the `--all` option is not given, @@ -154,13 +154,13 @@ topic origin/master`, the history of remote-tracking branch `origin/master` may have been rewound and rebuilt, leading to a history of this shape: - o---B1 - / + o---B1 + / ---o---o---B2--o---o---o---B (origin/master) - \ - B3 - \ - Derived (topic) + \ + B3 + \ + Derived (topic) where `origin/master` used to point at commits B3, B2, B1 and now it points at B, and your `topic` branch was started on top of it back diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt index 07f7295..04fdd8c 100644 --- a/Documentation/git-merge.txt +++ b/Documentation/git-merge.txt @@ -11,9 +11,10 @@ SYNOPSIS [verse] 'git merge' [-n] [--stat] [--no-commit] [--squash] [--[no-]edit] [-s <strategy>] [-X <strategy-option>] [-S[<keyid>]] + [--[no-]allow-unrelated-histories] [--[no-]rerere-autoupdate] [-m <msg>] [<commit>...] -'git merge' <msg> HEAD <commit>... 'git merge' --abort +'git merge' --continue DESCRIPTION ----------- @@ -44,11 +45,7 @@ a log message from the user describing the changes. D---E---F---G---H master ------------ -The second syntax (<msg> `HEAD` <commit>...) is supported for -historical reasons. Do not use it from the command line or in -new scripts. It is the same as `git merge -m <msg> <commit>...`. - -The third syntax ("`git merge --abort`") can only be run after the +The second syntax ("`git merge --abort`") can only be run after the merge has resulted in conflicts. 'git merge --abort' will abort the merge process and try to reconstruct the pre-merge state. However, if there were uncommitted changes when the merge started (and @@ -60,6 +57,8 @@ reconstruct the original (pre-merge) changes. Therefore: discouraged: while possible, it may leave you in a state that is hard to back out of in the case of a conflict. +The fourth syntax ("`git merge --continue`") can only be run after the +merge has resulted in conflicts. OPTIONS ------- @@ -98,6 +97,11 @@ commit or stash your changes before running 'git merge'. 'git merge --abort' is equivalent to 'git reset --merge' when `MERGE_HEAD` is present. +--continue:: + After a 'git merge' stops due to conflicts you can conclude the + merge by running 'git merge --continue' (see "HOW TO RESOLVE + CONFLICTS" section below). + <commit>...:: Commits, usually other branch heads, to merge into our branch. Specifying more than one commit will create a merge with diff --git a/Documentation/git-mergetool.txt b/Documentation/git-mergetool.txt index e846c2e..3622d66 100644 --- a/Documentation/git-mergetool.txt +++ b/Documentation/git-mergetool.txt @@ -79,6 +79,13 @@ success of the resolution after the custom tool has exited. Prompt before each invocation of the merge resolution program to give the user a chance to skip the path. +-O<orderfile>:: + Process files in the order specified in the + <orderfile>, which has one shell glob pattern per line. + This overrides the `diff.orderFile` configuration variable + (see linkgit:git-config[1]). To cancel `diff.orderFile`, + use `-O/dev/null`. + TEMPORARY FILES --------------- `git mergetool` creates `*.orig` backup files while resolving merges. diff --git a/Documentation/git-mktree.txt b/Documentation/git-mktree.txt index 5c6ebdf..c3616e7 100644 --- a/Documentation/git-mktree.txt +++ b/Documentation/git-mktree.txt @@ -32,7 +32,7 @@ OPTIONS --batch:: Allow building of more than one tree object before exiting. Each tree is separated by as single blank line. The final new-line is - optional. Note - if the '-z' option is used, lines are terminated + optional. Note - if the `-z` option is used, lines are terminated with NUL. GIT diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt index e453132..79449bf 100644 --- a/Documentation/git-mv.txt +++ b/Documentation/git-mv.txt @@ -32,10 +32,10 @@ OPTIONS --force:: Force renaming or moving of a file even if the target exists -k:: - Skip move or rename actions which would lead to an error + Skip move or rename actions which would lead to an error condition. An error happens when a source is neither existing nor controlled by Git, or when it would overwrite an existing - file unless '-f' is given. + file unless `-f` is given. -n:: --dry-run:: Do nothing; only show what would happen diff --git a/Documentation/git-name-rev.txt b/Documentation/git-name-rev.txt index ca28fb8..e8e68f5 100644 --- a/Documentation/git-name-rev.txt +++ b/Documentation/git-name-rev.txt @@ -26,7 +26,18 @@ OPTIONS --refs=<pattern>:: Only use refs whose names match a given shell pattern. The pattern - can be one of branch name, tag name or fully qualified ref name. + can be one of branch name, tag name or fully qualified ref name. If + given multiple times, use refs whose names match any of the given shell + patterns. Use `--no-refs` to clear any previous ref patterns given. + +--exclude=<pattern>:: + Do not use any ref whose name matches a given shell pattern. The + pattern can be one of branch name, tag name or fully qualified ref + name. If given multiple times, a ref will be excluded when it matches + any of the given patterns. When used together with --refs, a ref will + be used as a match only when it matches at least one --refs pattern and + does not match any --exclude patterns. Use `--no-exclude` to clear the + list of exclude patterns. --all:: List all commits reachable from all refs diff --git a/Documentation/git-notes.txt b/Documentation/git-notes.txt index 8de3499..be7db30 100644 --- a/Documentation/git-notes.txt +++ b/Documentation/git-notes.txt @@ -152,7 +152,7 @@ OPTIONS -c <object>:: --reedit-message=<object>:: - Like '-C', but with '-c' the editor is invoked, so that + Like '-C', but with `-c` the editor is invoked, so that the user can further edit the note message. --allow-empty:: @@ -161,7 +161,7 @@ OPTIONS --ref <ref>:: Manipulate the notes tree in <ref>. This overrides - 'GIT_NOTES_REF' and the "core.notesRef" configuration. The ref + `GIT_NOTES_REF` and the "core.notesRef" configuration. The ref specifies the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. @@ -333,10 +333,10 @@ notes.<name>.mergeStrategy:: notes.displayRef:: Which ref (or refs, if a glob or specified more than once), in addition to the default set by `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages with the 'git log' family of commands. This setting can be overridden on the command line or by the - 'GIT_NOTES_DISPLAY_REF' environment variable. + `GIT_NOTES_DISPLAY_REF` environment variable. See linkgit:git-log[1]. notes.rewrite.<command>:: @@ -345,7 +345,7 @@ notes.rewrite.<command>:: notes from the original to the rewritten commit. Defaults to `true`. See also "`notes.rewriteRef`" below. + -This setting can be overridden by the 'GIT_NOTES_REWRITE_REF' +This setting can be overridden by the `GIT_NOTES_REWRITE_REF` environment variable. notes.rewriteMode:: @@ -366,33 +366,33 @@ notes.rewriteRef:: Does not have a default value; you must configure this variable to enable note rewriting. + -Can be overridden with the 'GIT_NOTES_REWRITE_REF' environment variable. +Can be overridden with the `GIT_NOTES_REWRITE_REF` environment variable. ENVIRONMENT ----------- -'GIT_NOTES_REF':: +`GIT_NOTES_REF`:: Which ref to manipulate notes from, instead of `refs/notes/commits`. This overrides the `core.notesRef` setting. -'GIT_NOTES_DISPLAY_REF':: +`GIT_NOTES_DISPLAY_REF`:: Colon-delimited list of refs or globs indicating which refs, in addition to the default from `core.notesRef` or - 'GIT_NOTES_REF', to read notes from when showing commit + `GIT_NOTES_REF`, to read notes from when showing commit messages. This overrides the `notes.displayRef` setting. + A warning will be issued for refs that do not exist, but a glob that does not match any refs is silently ignored. -'GIT_NOTES_REWRITE_MODE':: +`GIT_NOTES_REWRITE_MODE`:: When copying notes during a rewrite, what to do if the target commit already has a note. Must be one of `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`. This overrides the `core.rewriteMode` setting. -'GIT_NOTES_REWRITE_REF':: +`GIT_NOTES_REWRITE_REF`:: When rewriting commits, which notes to copy from the original to the rewritten commit. Must be a colon-delimited list of refs or globs. @@ -402,4 +402,4 @@ on the `notes.rewrite.<command>` and `notes.rewriteRef` settings. GIT --- -Part of the linkgit:git[7] suite +Part of the linkgit:git[1] suite diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt index 738cfde..7436c64 100644 --- a/Documentation/git-p4.txt +++ b/Documentation/git-p4.txt @@ -104,7 +104,7 @@ $ git p4 sync //path/in/your/perforce/depot ------------ This imports the specified depot into 'refs/remotes/p4/master' in an existing Git repository. The -'--branch' option can be used to specify a different branch to +`--branch` option can be used to specify a different branch to be used for the p4 content. If a Git repository includes branches 'refs/remotes/origin/p4', these @@ -114,7 +114,7 @@ from a Git remote, this can be useful in a multi-developer environment. If there are multiple branches, doing 'git p4 sync' will automatically use the "BRANCH DETECTION" algorithm to try to partition new changes -into the right branch. This can be overridden with the '--branch' +into the right branch. This can be overridden with the `--branch` option to specify just a single branch to update. @@ -134,7 +134,7 @@ Submit ~~~~~~ Submitting changes from a Git repository back to the p4 repository requires a separate p4 client workspace. This should be specified -using the 'P4CLIENT' environment variable or the Git configuration +using the `P4CLIENT` environment variable or the Git configuration variable 'git-p4.client'. The p4 client must exist, but the client root will be created and populated if it does not already exist. @@ -150,10 +150,10 @@ $ git p4 submit topicbranch ------------ The upstream reference is generally 'refs/remotes/p4/master', but can -be overridden using the '--origin=' command-line option. +be overridden using the `--origin=` command-line option. The p4 changes will be created as the user invoking 'git p4 submit'. The -'--preserve-user' option will cause ownership to be modified +`--preserve-user` option will cause ownership to be modified according to the author of the Git commit. This option requires admin privileges in p4, which can be granted using 'p4 protect'. @@ -166,7 +166,7 @@ General options All commands except clone accept these options. --git-dir <dir>:: - Set the 'GIT_DIR' environment variable. See linkgit:git[1]. + Set the `GIT_DIR` environment variable. See linkgit:git[1]. -v:: --verbose:: @@ -221,7 +221,7 @@ Git repository: where they will be treated as remote-tracking branches by linkgit:git-branch[1] and other commands. This option instead puts p4 branches in 'refs/heads/p4/'. Note that future - sync operations must specify '--import-local' as well so that + sync operations must specify `--import-local` as well so that they can find the p4 branches in refs/heads. --max-changes <n>:: @@ -245,7 +245,7 @@ Git repository: default, involves removing the entire depot path. With this option, the full p4 depot path is retained in Git. For example, path '//depot/main/foo/bar.c', when imported from - '//depot/main/', becomes 'foo/bar.c'. With '--keep-path', the + '//depot/main/', becomes 'foo/bar.c'. With `--keep-path`, the Git path is instead 'depot/main/foo/bar.c'. --use-client-spec:: @@ -275,7 +275,7 @@ These options can be used to modify 'git p4 submit' behavior. --origin <commit>:: Upstream location from which commits are identified to submit to p4. By default, this is the most recent p4 commit reachable - from 'HEAD'. + from `HEAD`. -M:: Detect renames. See linkgit:git-diff[1]. Renames will be @@ -303,6 +303,15 @@ These options can be used to modify 'git p4 submit' behavior. submit manually or revert. This option always stops after the first (oldest) commit. Git tags are not exported to p4. +--shelve:: + Instead of submitting create a series of shelved changelists. + After creating each shelve, the relevant files are reverted/deleted. + If you have multiple commits pending multiple shelves will be created. + +--update-shelve CHANGELIST:: + Update an existing shelved changelist with this commit. Implies + --shelve. + --conflict=(ask|skip|quit):: Conflicts can occur when applying a commit to p4. When this happens, the default behavior ("ask") is to prompt whether to @@ -341,7 +350,7 @@ p4 revision specifier on the end: Import all changes from both named depot paths into a single repository. Only files below these directories are included. There is not a subdirectory in Git for each "proj1" and "proj2". - You must use the '--destination' option when specifying more + You must use the `--destination` option when specifying more than one depot path. The revision specifier must be specified identically on each depot path. If there are files in the depot paths with the same name, the path with the most recently @@ -355,7 +364,7 @@ CLIENT SPEC The p4 client specification is maintained with the 'p4 client' command and contains among other fields, a View that specifies how the depot is mapped into the client repository. The 'clone' and 'sync' commands -can consult the client spec when given the '--use-client-spec' option or +can consult the client spec when given the `--use-client-spec` option or when the useClientSpec variable is true. After 'git p4 clone', the useClientSpec variable is automatically set in the repository configuration file. This allows future 'git p4 submit' commands to @@ -390,7 +399,7 @@ different areas in the tree, and indicate related content. 'git p4' can use these mappings to determine branch relationships. If you have a repository where all the branches of interest exist as -subdirectories of a single depot path, you can use '--detect-branches' +subdirectories of a single depot path, you can use `--detect-branches` when cloning or syncing to have 'git p4' automatically find subdirectories in p4, and to generate these as branches in Git. @@ -467,6 +476,12 @@ git-p4.client:: Client specified as an option to all p4 commands, with '-c <client>', including the client spec. +git-p4.retries:: + Specifies the number of times to retry a p4 command (notably, + 'p4 sync') if the network times out. The default value is 3. + Set the value to 0 to disable retries or if your p4 version + does not support retries (pre 2012.2). + Clone and sync variables ~~~~~~~~~~~~~~~~~~~~~~~~ git-p4.syncFromOrigin:: @@ -507,7 +522,7 @@ git-p4.labelImportRegexp:: git-p4.useClientSpec:: Specify that the p4 client spec should be used to identify p4 depot paths of interest. This is equivalent to specifying the - option '--use-client-spec'. See the "CLIENT SPEC" section above. + option `--use-client-spec`. See the "CLIENT SPEC" section above. This variable is a boolean, not the name of a p4 client. git-p4.pathEncoding:: @@ -515,20 +530,18 @@ git-p4.pathEncoding:: Git expects paths encoded as UTF-8. Use this config to tell git-p4 what encoding Perforce had used for the paths. This encoding is used to transcode the paths to UTF-8. As an example, Perforce on Windows - often uses “cp1252” to encode path names. + often uses "cp1252" to encode path names. git-p4.largeFileSystem:: Specify the system that is used for large (binary) files. Please note that large file systems do not support the 'git p4 submit' command. - Only Git LFS [1] is implemented right now. Download - and install the Git LFS command line extension to use this option - and configure it like this: + Only Git LFS is implemented right now (see https://git-lfs.github.com/ + for more information). Download and install the Git LFS command line + extension to use this option and configure it like this: + ------------- git config git-p4.largeFileSystem GitLFS ------------- -+ - [1] https://git-lfs.github.com/ git-p4.largeFileExtensions:: All files matching a file extension in the list will be processed @@ -553,6 +566,17 @@ git-p4.keepEmptyCommits:: A changelist that contains only excluded files will be imported as an empty commit if this boolean option is set to true. +git-p4.mapUser:: + Map a P4 user to a name and email address in Git. Use a string + with the following format to create a mapping: ++ +------------- +git config --add git-p4.mapUser "p4user = First Last <mail@address.com>" +------------- ++ +A mapping will override any user information from P4. Mappings for +multiple P4 user can be defined. + Submit variables ~~~~~~~~~~~~~~~~ git-p4.detectRenames:: diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt index bbea529..8973510 100644 --- a/Documentation/git-pack-objects.txt +++ b/Documentation/git-pack-objects.txt @@ -104,13 +104,14 @@ base-name:: out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The size can be suffixed with "k", "m", or "g". - `--window-memory=0` makes memory usage unlimited, which is the - default. + `--window-memory=0` makes memory usage unlimited. The default + is taken from the `pack.windowMemory` configuration variable. --max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. - If specified, multiple packfiles may be created. + If specified, multiple packfiles may be created, which also + prevents the creation of a bitmap index. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt index 93c72a2..4470e4b 100644 --- a/Documentation/git-pull.txt +++ b/Documentation/git-pull.txt @@ -101,7 +101,7 @@ Options related to merging include::merge-options.txt[] -r:: ---rebase[=false|true|preserve]:: +--rebase[=false|true|preserve|interactive]:: When true, rebase the current branch on top of the upstream branch after fetching. If there is a remote-tracking branch corresponding to the upstream branch and the upstream branch @@ -113,6 +113,8 @@ to `git rebase` so that locally created merge commits will not be flattened. + When false, merge the current branch into the upstream branch. + +When `interactive`, enable the interactive mode of rebase. ++ See `pull.rebase`, `branch.<name>.rebase` and `branch.autoSetupRebase` in linkgit:git-config[1] if you want to make `git pull` always use `--rebase` instead of merging. @@ -126,6 +128,15 @@ unless you have read linkgit:git-rebase[1] carefully. --no-rebase:: Override earlier --rebase. +--autostash:: +--no-autostash:: + Before starting rebase, stash local modifications away (see + linkgit:git-stash[1]) if needed, and apply the stash when + done. `--no-autostash` is useful to override the `rebase.autoStash` + configuration variable (see linkgit:git-config[1]). ++ +This option is only valid when "--rebase" is used. + Options related to fetching ~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -226,6 +237,8 @@ If you tried a pull which resulted in complex conflicts and would want to start over, you can recover with 'git reset'. +include::transfer-data-leaks.txt[] + BUGS ---- Using --recurse-submodules can only fetch new commits in already checked diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt index 85a4d7d..1624a35 100644 --- a/Documentation/git-push.txt +++ b/Documentation/git-push.txt @@ -10,8 +10,8 @@ SYNOPSIS -------- [verse] 'git push' [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>] - [--repo=<repository>] [-f | --force] [--prune] [-v | --verbose] - [-u | --set-upstream] + [--repo=<repository>] [-f | --force] [-d | --delete] [--prune] [-v | --verbose] + [-u | --set-upstream] [--push-option=<string>] [--[no-]signed|--sign=(true|false|if-asked)] [--force-with-lease[=<refname>[:<expect>]]] [--no-verify] [<repository> [<refspec>...]] @@ -37,6 +37,13 @@ the default `<refspec>` by consulting `remote.*.push` configuration, and if it is not found, honors `push.default` configuration to decide what to push (See linkgit:git-config[1] for the meaning of `push.default`). +When neither the command-line nor the configuration specify what to +push, the default behavior is used, which corresponds to the `simple` +value for `push.default`: the current branch is pushed to the +corresponding upstream branch, but as a safety measure, the push is +aborted if the upstream branch does not have the same name as the +local one. + OPTIONS[[OPTIONS]] ------------------ @@ -130,8 +137,8 @@ already exists on the remote side. and also push annotated tags in `refs/tags` that are missing from the remote but are pointing at commit-ish that are reachable from the refs being pushed. This can also be specified - with configuration variable 'push.followTags'. For more - information, see 'push.followTags' in linkgit:git-config[1]. + with configuration variable `push.followTags`. For more + information, see `push.followTags` in linkgit:git-config[1]. --[no-]signed:: --sign=(true|false|if-asked):: @@ -149,6 +156,12 @@ already exists on the remote side. Either all refs are updated, or on error, no refs are updated. If the server does not support atomic pushes the push will fail. +-o:: +--push-option:: + Transmit the given string to the server, which passes them to + the pre-receive as well as the post-receive hook. The given string + must not contain a NUL or LF character. + --receive-pack=<git-receive-pack>:: --exec=<git-receive-pack>:: Path to the 'git-receive-pack' program on the remote @@ -191,10 +204,11 @@ branch we have for it. + `--force-with-lease=<refname>:<expect>` will protect the named ref (alone), if it is going to be updated, by requiring its current value to be -the same as the specified value <expect> (which is allowed to be +the same as the specified value `<expect>` (which is allowed to be different from the remote-tracking branch we have for the refname, or we do not even have to have such a remote-tracking branch when -this form is used). +this form is used). If `<expect>` is the empty string, then the named ref +must not already exist. + Note that all forms other than `--force-with-lease=<refname>:<expect>` that specifies the expected current value of the ref explicitly are @@ -233,7 +247,7 @@ origin +master` to force a push to the `master` branch). See the For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less linkgit:git-pull[1] and other commands. For more information, - see 'branch.<name>.merge' in linkgit:git-config[1]. + see `branch.<name>.merge` in linkgit:git-config[1]. --[no-]thin:: These options are passed to linkgit:git-send-pack[1]. A thin transfer @@ -257,22 +271,34 @@ origin +master` to force a push to the `master` branch). See the is specified. This flag forces progress status even if the standard error stream is not directed to a terminal. ---recurse-submodules=check|on-demand:: - Make sure all submodule commits used by the revisions to be - pushed are available on a remote-tracking branch. If 'check' is - used Git will verify that all submodule commits that changed in - the revisions to be pushed are available on at least one remote - of the submodule. If any commits are missing the push will be - aborted and exit with non-zero status. If 'on-demand' is used - all submodules that changed in the revisions to be pushed will - be pushed. If on-demand was not able to push all necessary - revisions it will also be aborted and exit with non-zero status. +--no-recurse-submodules:: +--recurse-submodules=check|on-demand|only|no:: + May be used to make sure all submodule commits used by the + revisions to be pushed are available on a remote-tracking branch. + If 'check' is used Git will verify that all submodule commits that + changed in the revisions to be pushed are available on at least one + remote of the submodule. If any commits are missing the push will + be aborted and exit with non-zero status. If 'on-demand' is used + all submodules that changed in the revisions to be pushed will be + pushed. If on-demand was not able to push all necessary revisions it will + also be aborted and exit with non-zero status. If 'only' is used all + submodules will be recursively pushed while the superproject is left + unpushed. A value of 'no' or using `--no-recurse-submodules` can be used + to override the push.recurseSubmodules configuration variable when no + submodule recursion is required. --[no-]verify:: Toggle the pre-push hook (see linkgit:githooks[5]). The default is --verify, giving the hook a chance to prevent the push. With --no-verify, the hook is bypassed completely. +-4:: +--ipv4:: + Use IPv4 addresses only, ignoring IPv6 addresses. + +-6:: +--ipv6:: + Use IPv6 addresses only, ignoring IPv4 addresses. include::urls-remotes.txt[] @@ -534,6 +560,8 @@ Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a `git gc` command on the origin repository. +include::transfer-data-leaks.txt[] + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-quiltimport.txt b/Documentation/git-quiltimport.txt index ff633b0..8cf952b 100644 --- a/Documentation/git-quiltimport.txt +++ b/Documentation/git-quiltimport.txt @@ -46,14 +46,14 @@ OPTIONS The directory to find the quilt patches. + The default for the patch directory is patches -or the value of the $QUILT_PATCHES environment +or the value of the `$QUILT_PATCHES` environment variable. --series <file>:: The quilt series file. + The default for the series file is <patches>/series -or the value of the $QUILT_SERIES environment +or the value of the `$QUILT_SERIES` environment variable. GIT diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt index fa1d557..ed9d63e 100644 --- a/Documentation/git-read-tree.txt +++ b/Documentation/git-read-tree.txt @@ -115,6 +115,12 @@ OPTIONS directories the index file and index output file are located in. +--[no-]recurse-submodules:: + Using --recurse-submodules will update the content of all initialized + submodules according to the commit recorded in the superproject by + calling read-tree recursively, also setting the submodules HEAD to be + detached at that commit. + --no-sparse-checkout:: Disable sparse checkout support even if `core.sparseCheckout` is true. diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt index 6cca8bb..67d48e6 100644 --- a/Documentation/git-rebase.txt +++ b/Documentation/git-rebase.txt @@ -3,7 +3,7 @@ git-rebase(1) NAME ---- -git-rebase - Forward-port local commits to the updated upstream head +git-rebase - Reapply commits on top of another base tip SYNOPSIS -------- @@ -12,7 +12,7 @@ SYNOPSIS [<upstream> [<branch>]] 'git rebase' [-i | --interactive] [options] [--exec <cmd>] [--onto <newbase>] --root [<branch>] -'git rebase' --continue | --skip | --abort | --edit-todo +'git rebase' --continue | --skip | --abort | --quit | --edit-todo DESCRIPTION ----------- @@ -208,10 +208,10 @@ rebase.stat:: rebase. False by default. rebase.autoSquash:: - If set to true enable '--autosquash' option by default. + If set to true enable `--autosquash` option by default. rebase.autoStash:: - If set to true enable '--autostash' option by default. + If set to true enable `--autostash` option by default. rebase.missingCommitsCheck:: If set to "warn", print warnings about removed commits in @@ -220,7 +220,7 @@ rebase.missingCommitsCheck:: done. "ignore" by default. rebase.instructionFormat:: - Custom commit list format to use during an '--interactive' rebase. + Custom commit list format to use during an `--interactive` rebase. OPTIONS ------- @@ -252,6 +252,11 @@ leave out at most one of A and B, in which case it defaults to HEAD. will be reset to where it was when the rebase operation was started. +--quit:: + Abort the rebase operation but HEAD is not reset back to the + original branch. The index and working tree are also left + unchanged as a result. + --keep-empty:: Keep the commits that do not change anything from its parents in the result. @@ -391,9 +396,6 @@ idea unless you know what you are doing (see BUGS below). final history. <cmd> will be interpreted as one or more shell commands. + -This option can only be used with the `--interactive` option -(see INTERACTIVE MODE below). -+ You may execute several commands by either using one instance of `--exec` with several commands: + @@ -406,6 +408,9 @@ or by giving more than one `--exec`: If `--autosquash` is used, "exec" lines will not be appended for the intermediate commits, and will only appear at the end of each squash/fixup series. ++ +This uses the `--interactive` machinery internally, but it can be run +without an explicit `--interactive`. --root:: Rebase all commits reachable from <branch>, instead of @@ -428,9 +433,9 @@ squash/fixup series. "fixup! " or "squash! " after the first, in case you referred to an earlier fixup/squash with `git commit --fixup/--squash`. + -This option is only valid when the '--interactive' option is used. +This option is only valid when the `--interactive` option is used. + -If the '--autosquash' option is enabled by default using the +If the `--autosquash` option is enabled by default using the configuration variable `rebase.autoSquash`, this option can be used to override and disable this setting. diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt index 000ee8d..0ccd5fb 100644 --- a/Documentation/git-receive-pack.txt +++ b/Documentation/git-receive-pack.txt @@ -33,6 +33,9 @@ post-update hooks found in the Documentation/howto directory. option, which tells it if updates to a ref should be denied if they are not fast-forwards. +A number of other receive.* config options are available to tweak +its behavior, see linkgit:git-config[1]. + OPTIONS ------- <directory>:: diff --git a/Documentation/git-relink.txt b/Documentation/git-relink.txt deleted file mode 100644 index 3b33c99..0000000 --- a/Documentation/git-relink.txt +++ /dev/null @@ -1,30 +0,0 @@ -git-relink(1) -============= - -NAME ----- -git-relink - Hardlink common objects in local repositories - -SYNOPSIS --------- -[verse] -'git relink' [--safe] <dir>... <master_dir> - -DESCRIPTION ------------ -This will scan 1 or more object repositories and look for objects in common -with a master repository. Objects not already hardlinked to the master -repository will be replaced with a hardlink to the master repository. - -OPTIONS -------- ---safe:: - Stops if two objects with the same hash exist but have different sizes. - Default is to warn and continue. - -<dir>:: - Directories containing a .git/objects/ subdirectory. - -GIT ---- -Part of the linkgit:git[1] suite diff --git a/Documentation/git-remote-fd.txt b/Documentation/git-remote-fd.txt index e700baf..80afca8 100644 --- a/Documentation/git-remote-fd.txt +++ b/Documentation/git-remote-fd.txt @@ -17,7 +17,7 @@ fetch, push or archive. If only <infd> is given, it is assumed to be a bidirectional socket connected to remote Git server (git-upload-pack, git-receive-pack or -git-upload-achive). If both <infd> and <outfd> are given, they are assumed +git-upload-archive). If both <infd> and <outfd> are given, they are assumed to be pipes connected to a remote Git server (<infd> being the inbound pipe and <outfd> being the outbound pipe. diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index 1d7ecea..577b969 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -137,9 +137,9 @@ branches, adds to that list. Retrieves the URLs for a remote. Configurations for `insteadOf` and `pushInsteadOf` are expanded here. By default, only the first URL is listed. + -With '--push', push URLs are queried rather than fetch URLs. +With `--push`, push URLs are queried rather than fetch URLs. + -With '--all', all URLs for the remote will be listed. +With `--all`, all URLs for the remote will be listed. 'set-url':: @@ -147,11 +147,11 @@ Changes URLs for the remote. Sets first URL for remote <name> that matches regex <oldurl> (first URL if no <oldurl> is given) to <newurl>. If <oldurl> doesn't match any URL, an error occurs and nothing is changed. + -With '--push', push URLs are manipulated instead of fetch URLs. +With `--push`, push URLs are manipulated instead of fetch URLs. + -With '--add', instead of changing existing URLs, new URL is added. +With `--add`, instead of changing existing URLs, new URL is added. + -With '--delete', instead of changing existing URLs, all URLs matching +With `--delete`, instead of changing existing URLs, all URLs matching regex <url> are deleted for remote <name>. Trying to delete all non-push URLs is an error. + diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt index 0e0bd36..26afe6e 100644 --- a/Documentation/git-repack.txt +++ b/Documentation/git-repack.txt @@ -33,7 +33,7 @@ OPTIONS pack everything referenced into a single pack. Especially useful when packing a repository that is used for private development. Use - with '-d'. This will clean up the objects that `git prune` + with `-d`. This will clean up the objects that `git prune` leaves behind, but `git fsck --full --dangling` shows as dangling. + @@ -42,7 +42,7 @@ whole new pack in order to get any contained object, no matter how many other objects in that pack they already have locally. -A:: - Same as `-a`, unless '-d' is used. Then any unreachable + Same as `-a`, unless `-d` is used. Then any unreachable objects in a previous pack become loose, unpacked objects, instead of being left in the old pack. Unreachable objects are never intentionally added to a pack, even when repacking. @@ -100,13 +100,16 @@ other objects in that pack they already have locally. out of memory with a large window, but still be able to take advantage of the large window for the smaller objects. The size can be suffixed with "k", "m", or "g". - `--window-memory=0` makes memory usage unlimited, which is the - default. + `--window-memory=0` makes memory usage unlimited. The default + is taken from the `pack.windowMemory` configuration variable. + Note that the actual memory usage will be the limit multiplied + by the number of threads used by linkgit:git-pack-objects[1]. --max-pack-size=<n>:: Maximum size of each output pack file. The size can be suffixed with "k", "m", or "g". The minimum size allowed is limited to 1 MiB. - If specified, multiple packfiles may be created. + If specified, multiple packfiles may be created, which also + prevents the creation of a bitmap index. The default is unlimited, unless the config variable `pack.packSizeLimit` is set. @@ -115,7 +118,8 @@ other objects in that pack they already have locally. Write a reachability bitmap index as part of the repack. This only makes sense when used with `-a` or `-A`, as the bitmaps must be able to refer to all reachable objects. This option - overrides the setting of `pack.writeBitmaps`. + overrides the setting of `repack.writeBitmaps`. This option + has no effect if multiple packfiles are created. --pack-kept-objects:: Include objects in `.keep` files when repacking. Note that we @@ -123,9 +127,22 @@ other objects in that pack they already have locally. This means that we may duplicate objects, but this makes the option safe to use when there are concurrent pushes or fetches. This option is generally only useful if you are writing bitmaps - with `-b` or `pack.writeBitmaps`, as it ensures that the + with `-b` or `repack.writeBitmaps`, as it ensures that the bitmapped packfile has the necessary objects. +--unpack-unreachable=<when>:: + When loosening unreachable objects, do not bother loosening any + objects older than `<when>`. This can be used to optimize out + the write of any objects that would be immediately pruned by + a follow-up `git prune`. + +-k:: +--keep-unreachable:: + When used with `-ad`, any unreachable objects from existing + packs will be appended to the end of the packfile instead of + being removed. In addition, any unreachable loose objects will + be packed (and their loose counterparts removed). + Configuration ------------- @@ -133,7 +150,7 @@ By default, the command passes `--delta-base-offset` option to 'git pack-objects'; this typically results in slightly smaller packs, but the generated packs are incompatible with versions of Git older than version 1.4.4. If you need to share your repository with such ancient Git -versions, either directly or via the dumb http or rsync protocol, then you +versions, either directly or via the dumb http protocol, then you need to set the configuration variable `repack.UseDeltaBaseOffset` to "false" and repack. Access from old Git versions over the native protocol is unaffected by this option as the conversion is performed on the fly diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt index 8fff598..e5c57ae 100644 --- a/Documentation/git-replace.txt +++ b/Documentation/git-replace.txt @@ -51,7 +51,7 @@ $ git cat-file commit foo shows information about commit 'bar'. -The 'GIT_NO_REPLACE_OBJECTS' environment variable can be set to +The `GIT_NO_REPLACE_OBJECTS` environment variable can be set to achieve the same effect as the `--no-replace-objects` option. OPTIONS diff --git a/Documentation/git-reset.txt b/Documentation/git-reset.txt index 25432d9..8a21198 100644 --- a/Documentation/git-reset.txt +++ b/Documentation/git-reset.txt @@ -292,6 +292,54 @@ $ git reset --keep start <3> <3> But you can use "reset --keep" to remove the unwanted commit after you switched to "branch2". +Split a commit apart into a sequence of commits:: ++ +Suppose that you have created lots of logically separate changes and commited +them together. Then, later you decide that it might be better to have each +logical chunk associated with its own commit. You can use git reset to rewind +history without changing the contents of your local files, and then successively +use `git add -p` to interactively select which hunks to include into each commit, +using `git commit -c` to pre-populate the commit message. ++ +------------ +$ git reset -N HEAD^ <1> +$ git add -p <2> +$ git diff --cached <3> +$ git commit -c HEAD@{1} <4> +... <5> +$ git add ... <6> +$ git diff --cached <7> +$ git commit ... <8> +------------ ++ +<1> First, reset the history back one commit so that we remove the original + commit, but leave the working tree with all the changes. The -N ensures + that any new files added with HEAD are still marked so that git add -p + will find them. +<2> Next, we interactively select diff hunks to add using the git add -p + facility. This will ask you about each diff hunk in sequence and you can + use simple commands such as "yes, include this", "No don't include this" + or even the very powerful "edit" facility. +<3> Once satisfied with the hunks you want to include, you should verify what + has been prepared for the first commit by using git diff --cached. This + shows all the changes that have been moved into the index and are about + to be committed. +<4> Next, commit the changes stored in the index. The -c option specifies to + pre-populate the commit message from the original message that you started + with in the first commit. This is helpful to avoid retyping it. The HEAD@{1} + is a special notation for the commit that HEAD used to be at prior to the + original reset commit (1 change ago). See linkgit:git-reflog[1] for more + details. You may also use any other valid commit reference. +<5> You can repeat steps 2-4 multiple times to break the original code into + any number of commits. +<6> Now you've split out many of the changes into their own commits, and might + no longer use the patch mode of git add, in order to select all remaining + uncommitted changes. +<7> Once again, check to verify that you've included what you want to. You may + also wish to verify that git diff doesn't show any remaining changes to be + committed later. +<8> And finally create the final commit. + DISCUSSION ---------- diff --git a/Documentation/git-rev-parse.txt b/Documentation/git-rev-parse.txt index b6c6326..c40c470 100644 --- a/Documentation/git-rev-parse.txt +++ b/Documentation/git-rev-parse.txt @@ -91,7 +91,8 @@ repository. For example: ---- prefix=$(git rev-parse --show-prefix) cd "$(git rev-parse --show-toplevel)" -eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")" +# rev-parse provides the -- needed for 'set' +eval "set $(git rev-parse --sq --prefix "$prefix" -- "$@")" ---- --verify:: @@ -216,6 +217,10 @@ If `$GIT_DIR` is not defined and the current directory is not detected to lie in a Git repository or work tree print a message to stderr and exit with nonzero status. +--absolute-git-dir:: + Like `--git-dir`, but its output is always the canonicalized + absolute path. + --git-common-dir:: Show `$GIT_COMMON_DIR` if defined, else `$GIT_DIR`. @@ -256,6 +261,12 @@ print a message to stderr and exit with nonzero status. --show-toplevel:: Show the absolute path of the top-level directory. +--show-superproject-working-tree + Show the absolute path of the root of the superproject's + working tree (if exists) that uses the current repository as + its submodule. Outputs nothing if the current repository is + not used as a submodule by any project. + --shared-index-path:: Show the path to the shared index file in split index mode, or empty if not in split-index mode. diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt index b15139f..837707a 100644 --- a/Documentation/git-revert.txt +++ b/Documentation/git-revert.txt @@ -24,7 +24,7 @@ from the HEAD commit). Note: 'git revert' is used to record some new commits to reverse the effect of some earlier commits (often only a faulty one). If you want to throw away all uncommitted changes in your working directory, you -should see linkgit:git-reset[1], particularly the '--hard' option. If +should see linkgit:git-reset[1], particularly the `--hard` option. If you want to extract specific files as they were in another commit, you should see linkgit:git-checkout[1], specifically the `git checkout <commit> -- <filename>` syntax. Take care with these alternatives as @@ -37,7 +37,7 @@ OPTIONS For a more complete list of ways to spell commit names, see linkgit:gitrevisions[7]. Sets of commits can also be given but no traversal is done by - default, see linkgit:git-rev-list[1] and its '--no-walk' + default, see linkgit:git-rev-list[1] and its `--no-walk` option. -e:: @@ -89,6 +89,7 @@ effect to your index in a row. -s:: --signoff:: Add Signed-off-by line at the end of the commit message. + See the signoff option in linkgit:git-commit[1] for more information. --strategy=<strategy>:: Use the given merge strategy. Should only be used once. diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 771a7b5..9d66166 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -47,18 +47,18 @@ Composing --annotate:: Review and edit each patch you're about to send. Default is the value - of 'sendemail.annotate'. See the CONFIGURATION section for - 'sendemail.multiEdit'. + of `sendemail.annotate`. See the CONFIGURATION section for + `sendemail.multiEdit`. --bcc=<address>,...:: Specify a "Bcc:" value for each email. Default is the value of - 'sendemail.bcc'. + `sendemail.bcc`. + This option may be specified multiple times. --cc=<address>,...:: Specify a starting "Cc:" value for each email. - Default is the value of 'sendemail.cc'. + Default is the value of `sendemail.cc`. + This option may be specified multiple times. @@ -66,7 +66,7 @@ This option may be specified multiple times. Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) to edit an introductory message for the patch series. + -When '--compose' is used, git send-email will use the From, Subject, and +When `--compose` is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank (or Git: prefixed) lines, the summary won't be sent, but From, Subject, @@ -74,12 +74,12 @@ and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. + -See the CONFIGURATION section for 'sendemail.multiEdit'. +See the CONFIGURATION section for `sendemail.multiEdit`. --from=<address>:: Specify the sender of the emails. If not specified on the command line, - the value of the 'sendemail.from' configuration option is used. If - neither the command-line option nor 'sendemail.from' are set, then the + the value of the `sendemail.from` configuration option is used. If + neither the command-line option nor `sendemail.from` are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by "git var -l". @@ -89,7 +89,7 @@ See the CONFIGURATION section for 'sendemail.multiEdit'. reply to the given Message-Id, which avoids breaking threads to provide a new patch series. The second and subsequent emails will be sent as replies according to - the `--[no]-chain-reply-to` setting. + the `--[no-]chain-reply-to` setting. + So for example when `--thread` and `--no-chain-reply-to` are specified, the second and subsequent patches will be replies to the first one like in the @@ -114,7 +114,7 @@ is not set, this will be prompted for. --to=<address>,...:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the - value of the 'sendemail.to' configuration value; if that is unspecified, + value of the `sendemail.to` configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. + This option may be specified multiple times. @@ -138,7 +138,7 @@ Note that no attempts whatsoever are made to validate the encoding. can be useful when the repository contains files that contain carriage returns, but makes the raw patch email file (as saved from a MUA) much harder to inspect manually. base64 is even more fool proof, but also - even more opaque. Default is the value of the 'sendemail.transferEncoding' + even more opaque. Default is the value of the `sendemail.transferEncoding` configuration value; if that is unspecified, git will use 8bit and not add a Content-Transfer-Encoding header. @@ -157,20 +157,20 @@ Sending subscribed to a list. In order to use the 'From' address, set the value to "auto". If you use the sendmail binary, you must have suitable privileges for the -f parameter. Default is the value of the - 'sendemail.envelopeSender' configuration variable; if that is + `sendemail.envelopeSender` configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. --smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of - 'sendemail.smtpEncryption'. + `sendemail.smtpEncryption`. --smtp-domain=<FQDN>:: Specifies the Fully Qualified Domain Name (FQDN) used in the HELO/EHLO command to the SMTP server. Some servers require the FQDN to match your IP address. If not set, git send-email attempts to determine your FQDN automatically. Default is the value of - 'sendemail.smtpDomain'. + `sendemail.smtpDomain`. --smtp-auth=<mechanisms>:: Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting @@ -182,19 +182,19 @@ $ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ... + If at least one of the specified mechanisms matches the ones advertised by the SMTP server and if it is supported by the utilized SASL library, the mechanism -is used for authentication. If neither 'sendemail.smtpAuth' nor '--smtp-auth' +is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth` is specified, all mechanisms supported by the SASL library can be used. --smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as - the password. Default is the value of 'sendemail.smtpPass', - however '--smtp-pass' always overrides this value. + the password. Default is the value of `sendemail.smtpPass`, + however `--smtp-pass` always overrides this value. + Furthermore, passwords need not be specified in configuration files or on the command line. If a username has been specified (with -'--smtp-user' or a 'sendemail.smtpUser'), but no password has been -specified (with '--smtp-pass' or 'sendemail.smtpPass'), then +`--smtp-user` or a `sendemail.smtpUser`), but no password has been +specified (with `--smtp-pass` or `sendemail.smtpPass`), then a password is obtained using 'git-credential'. --smtp-server=<host>:: @@ -202,7 +202,7 @@ a password is obtained using 'git-credential'. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; the program must support the `-i` option. Default value can - be specified by the 'sendemail.smtpServer' configuration + be specified by the `sendemail.smtpServer` configuration option; the built-in default is `/usr/sbin/sendmail` or `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. @@ -213,11 +213,11 @@ a password is obtained using 'git-credential'. submission port 587, or the common SSL smtp port 465); symbolic port names (e.g. "submission" instead of 587) are also accepted. The port can also be set with the - 'sendemail.smtpServerPort' configuration variable. + `sendemail.smtpServerPort` configuration variable. --smtp-server-option=<option>:: If set, specifies the outgoing SMTP server option to use. - Default value can be specified by the 'sendemail.smtpServerOption' + Default value can be specified by the `sendemail.smtpServerOption` configuration option. + The --smtp-server-option option must be repeated for each option you want @@ -234,13 +234,13 @@ must be used for each option. certificates concatenated together: see verify(1) -CAfile and -CApath for more information on these). Set it to an empty string to disable certificate verification. Defaults to the value of the - 'sendemail.smtpsslcertpath' configuration variable, if set, or the + `sendemail.smtpsslcertpath` configuration variable, if set, or the backing SSL library's compiled-in default otherwise (which should be the best choice on most platforms). --smtp-user=<user>:: - Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser'; - if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'), + Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`; + if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`), then authentication is not attempted. --smtp-debug=0|1:: @@ -261,25 +261,25 @@ Automating Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. - Default is the value of 'sendemail.ccCmd' configuration value. + Default is the value of `sendemail.ccCmd` configuration value. --[no-]chain-reply-to:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using this, it is recommended that the first file given be an overview of the - entire patch series. Disabled by default, but the 'sendemail.chainReplyTo' + entire patch series. Disabled by default, but the `sendemail.chainReplyTo` configuration variable can be used to enable it. --identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is - the value of 'sendemail.identity'. + the value of `sendemail.identity`. --[no-]signed-off-by-cc:: If this is set, add emails found in Signed-off-by: or Cc: lines to the - cc list. Default is the value of 'sendemail.signedoffbycc' configuration + cc list. Default is the value of `sendemail.signedoffbycc` configuration value; if that is unspecified, default to --signed-off-by-cc. --[no-]cc-cover:: @@ -312,13 +312,13 @@ Automating - 'all' will suppress all auto cc values. -- + -Default is the value of 'sendemail.suppresscc' configuration value; if +Default is the value of `sendemail.suppresscc` configuration value; if that is unspecified, default to 'self' if --suppress-from is specified, as well as 'body' if --no-signed-off-cc is specified. --[no-]suppress-from:: If this is set, do not add the From: address to the cc: list. - Default is the value of 'sendemail.suppressFrom' configuration + Default is the value of `sendemail.suppressFrom` configuration value; if that is unspecified, default to --no-suppress-from. --[no-]thread:: @@ -330,7 +330,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. + If disabled with "--no-thread", those headers will not be added (unless specified with --in-reply-to). Default is the value of the -'sendemail.thread' configuration value; if that is unspecified, +`sendemail.thread` configuration value; if that is unspecified, default to --thread. + It is up to the user to ensure that no In-Reply-To header already @@ -355,7 +355,7 @@ Administering - 'auto' is equivalent to 'cc' + 'compose' -- + -Default is the value of 'sendemail.confirm' configuration value; if that +Default is the value of `sendemail.confirm` configuration value; if that is unspecified, default to 'auto' unless any of the suppress options have been specified, in which case default to 'compose'. @@ -364,8 +364,8 @@ have been specified, in which case default to 'compose'. --[no-]format-patch:: When an argument may be understood either as a reference or as a file name, - choose to understand it as a format-patch argument ('--format-patch') - or as a file name ('--no-format-patch'). By default, when such a conflict + choose to understand it as a format-patch argument (`--format-patch`) + or as a file name (`--no-format-patch`). By default, when such a conflict occurs, git send-email will fail. --quiet:: @@ -381,8 +381,8 @@ have been specified, in which case default to 'compose'. is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. -- + -Default is the value of 'sendemail.validate'; if this is not set, -default to '--validate'. +Default is the value of `sendemail.validate`; if this is not set, +default to `--validate`. --force:: Send emails even if safety checks would prevent it. @@ -403,7 +403,7 @@ CONFIGURATION sendemail.aliasesFile:: To avoid typing long email addresses, point this to one or more - email aliases files. You must also supply 'sendemail.aliasFileType'. + email aliases files. You must also supply `sendemail.aliasFileType`. sendemail.aliasFileType:: Format of the file(s) specified in sendemail.aliasesFile. Must be @@ -428,13 +428,13 @@ sendmail;; sendemail.multiEdit:: If true (default), a single editor instance will be spawned to edit - files you have to edit (patches when '--annotate' is used, and the - summary when '--compose' is used). If false, files will be edited one + files you have to edit (patches when `--annotate` is used, and the + summary when `--compose` is used). If false, files will be edited one after the other, spawning a new editor each time. sendemail.confirm:: Sets the default for whether to confirm before sending. Must be - one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm` in the previous section for the meaning of these values. EXAMPLE @@ -450,6 +450,19 @@ edit ~/.gitconfig to specify your account settings: smtpUser = yourname@gmail.com smtpServerPort = 587 +If you have multifactor authentication setup on your gmail account, you will +need to generate an app-specific password for use with 'git send-email'. Visit +https://security.google.com/settings/security/apppasswords to setup an +app-specific password. Once setup, you can store it with the credentials +helper: + + $ git credential fill + protocol=smtp + host=smtp.gmail.com + username=youname@gmail.com + password=app-password + + Once your commits are ready to be sent to the mailing list, run the following commands: diff --git a/Documentation/git-send-pack.txt b/Documentation/git-send-pack.txt index 6aa91e8..966abb0 100644 --- a/Documentation/git-send-pack.txt +++ b/Documentation/git-send-pack.txt @@ -44,7 +44,7 @@ OPTIONS option, then the refs from stdin are processed after those on the command line. + -If '--stateless-rpc' is specified together with this option then +If `--stateless-rpc` is specified together with this option then the list of refs must be in packet format (pkt-line). Each ref must be in a separate packet, and the list must end with a flush packet. @@ -81,6 +81,12 @@ be in a separate packet, and the list must end with a flush packet. will also fail if the actual call to `gpg --sign` fails. See linkgit:git-receive-pack[1] for the details on the receiving end. +--push-option=<string>:: + Pass the specified string as a push option for consumption by + hooks on the server side. If the server doesn't support push + options, error out. See linkgit:git-push[1] and + linkgit:githooks[5] for details. + <host>:: A remote host to house the repository. When this part is specified, 'git-receive-pack' is invoked via @@ -99,11 +105,11 @@ Specifying the Refs There are three ways to specify which refs to update on the remote end. -With '--all' flag, all refs that exist locally are transferred to +With `--all` flag, all refs that exist locally are transferred to the remote side. You cannot specify any '<ref>' if you use this flag. -Without '--all' and without any '<ref>', the heads that exist +Without `--all` and without any '<ref>', the heads that exist both on the local side and on the remote side are updated. When one or more '<ref>' are specified explicitly (whether on the @@ -134,13 +140,13 @@ name. See linkgit:git-rev-parse[1]. exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. -Without '--force', the <src> ref is stored at the remote only if +Without `--force`, the <src> ref is stored at the remote only if <dst> does not exist, or <dst> is a proper subset (i.e. an ancestor) of <src>. This check, known as "fast-forward check", is performed in order to avoid accidentally overwriting the remote ref and lose other peoples' commits from there. -With '--force', the fast-forward check is disabled for all refs. +With `--force`, the fast-forward check is disabled for all refs. Optionally, a <ref> parameter can be prefixed with a plus '+' sign to disable the fast-forward check only on that ref. diff --git a/Documentation/git-sh-setup.txt b/Documentation/git-sh-setup.txt index 4f67c4c..8632612 100644 --- a/Documentation/git-sh-setup.txt +++ b/Documentation/git-sh-setup.txt @@ -41,7 +41,7 @@ usage:: die with the usage message. set_reflog_action:: - Set GIT_REFLOG_ACTION environment to a given string (typically + Set `GIT_REFLOG_ACTION` environment to a given string (typically the name of the program) unless it is already set. Whenever the script runs a `git` command that updates refs, a reflog entry is created using the value of this string to leave the diff --git a/Documentation/git-shell.txt b/Documentation/git-shell.txt index e4bdd22..2e30a3e 100644 --- a/Documentation/git-shell.txt +++ b/Documentation/git-shell.txt @@ -24,7 +24,7 @@ named `git-shell-commands` in the user's home directory. COMMANDS -------- -'git shell' accepts the following commands after the '-c' option: +'git shell' accepts the following commands after the `-c` option: 'git receive-pack <argument>':: 'git upload-pack <argument>':: @@ -43,7 +43,7 @@ directory. INTERACTIVE USE --------------- -By default, the commands above can be executed only with the '-c' +By default, the commands above can be executed only with the `-c` option; the shell is not interactive. If a `~/git-shell-commands` directory is present, 'git shell' diff --git a/Documentation/git-shortlog.txt b/Documentation/git-shortlog.txt index 31af7f2..ee6c547 100644 --- a/Documentation/git-shortlog.txt +++ b/Documentation/git-shortlog.txt @@ -47,6 +47,10 @@ OPTIONS Each pretty-printed commit will be rewrapped before it is shown. +-c:: +--committer:: + Collect and show committer identities instead of authors. + -w[<width>[,<indent1>[,<indent2>]]]:: Linewrap the output by wrapping each line at `width`. The first line of each entry is indented by `indent1` spaces, and the second diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt index b91d4e5..7818e0f 100644 --- a/Documentation/git-show-branch.txt +++ b/Documentation/git-show-branch.txt @@ -60,7 +60,7 @@ OPTIONS are shown before their parents). --date-order:: - This option is similar to '--topo-order' in the sense that no + This option is similar to `--topo-order` in the sense that no parent comes before all of its children, but otherwise commits are ordered according to their commit date. diff --git a/Documentation/git-show-ref.txt b/Documentation/git-show-ref.txt index 3a32451..c0aa871 100644 --- a/Documentation/git-show-ref.txt +++ b/Documentation/git-show-ref.txt @@ -60,7 +60,7 @@ OPTIONS Enable stricter reference checking by requiring an exact ref path. Aside from returning an error code of 1, it will also print an error - message if '--quiet' was not specified. + message if `--quiet` was not specified. --abbrev[=<n>]:: @@ -70,7 +70,7 @@ OPTIONS -q:: --quiet:: - Do not print any results to stdout. When combined with '--verify' this + Do not print any results to stdout. When combined with `--verify` this can be used to silently check if a reference exists. --exclude-existing[=<pattern>]:: @@ -134,7 +134,7 @@ use: This will show "refs/heads/master" but also "refs/remote/other-repo/master", if such references exists. -When using the '--verify' flag, the command requires an exact path: +When using the `--verify` flag, the command requires an exact path: ----------------------------------------------------------------------------- git show-ref --verify refs/heads/master diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt index 92df596..70191d0 100644 --- a/Documentation/git-stash.txt +++ b/Documentation/git-stash.txt @@ -13,8 +13,11 @@ SYNOPSIS 'git stash' drop [-q|--quiet] [<stash>] 'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>] 'git stash' branch <branchname> [<stash>] -'git stash' [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] - [-u|--include-untracked] [-a|--all] [<message>]] +'git stash' save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [<message>] +'git stash' [push [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] + [-u|--include-untracked] [-a|--all] [-m|--message <message>]] + [--] [<pathspec>...]] 'git stash' clear 'git stash' create [<message>] 'git stash' store [-m|--message <message>] [-q|--quiet] <commit> @@ -39,19 +42,31 @@ The latest stash you created is stored in `refs/stash`; older stashes are found in the reflog of this reference and can be named using the usual reflog syntax (e.g. `stash@{0}` is the most recently created stash, `stash@{1}` is the one before it, `stash@{2.hours.ago}` -is also possible). +is also possible). Stashes may also be referenced by specifying just the +stash index (e.g. the integer `n` is equivalent to `stash@{n}`). OPTIONS ------- save [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [<message>]:: +push [-p|--patch] [-k|--[no-]keep-index] [-u|--include-untracked] [-a|--all] [-q|--quiet] [-m|--message <message>] [--] [<pathspec>...]:: - Save your local modifications to a new 'stash', and run `git reset - --hard` to revert them. The <message> part is optional and gives - the description along with the stashed state. For quickly making - a snapshot, you can omit _both_ "save" and <message>, but giving - only <message> does not trigger this action to prevent a misspelled - subcommand from making an unwanted stash. + Save your local modifications to a new 'stash' and roll them + back to HEAD (in the working tree and in the index). + The <message> part is optional and gives + the description along with the stashed state. ++ +For quickly making a snapshot, you can omit "push". In this mode, +non-option arguments are not allowed to prevent a misspelled +subcommand from making an unwanted stash. The two exceptions to this +are `stash -p` which acts as alias for `stash push -p` and pathspecs, +which are allowed after a double hyphen `--` for disambiguation. ++ +When pathspec is given to 'git stash push', the new stash records the +modified states only for the files that match the pathspec. The index +entries and working tree files are then rolled back to the state in +HEAD only for these files, too, leaving files that do not match the +pathspec intact. + If the `--keep-index` option is used, all changes already added to the index are left intact. diff --git a/Documentation/git-status.txt b/Documentation/git-status.txt index e1e8f57..ba87365 100644 --- a/Documentation/git-status.txt +++ b/Documentation/git-status.txt @@ -32,11 +32,14 @@ OPTIONS --branch:: Show the branch and tracking info even in short-format. ---porcelain:: +--porcelain[=<version>]:: Give the output in an easy-to-parse format for scripts. This is similar to the short output, but will remain stable across Git versions and regardless of user configuration. See below for details. ++ +The version parameter is used to specify the format version. +This is optional and defaults to the original version 'v1' format. --long:: Give the output in the long-format. This is the default. @@ -96,7 +99,7 @@ configuration variable documented in linkgit:git-config[1]. -z:: Terminate entries with NUL, instead of LF. This implies - the `--porcelain` output format if no other format is given. + the `--porcelain=v1` output format if no other format is given. --column[=<options>]:: --no-column:: @@ -180,12 +183,12 @@ in which case `XY` are `!!`. If -b is used the short-format status is preceded by a line -## branchname tracking info + ## branchname tracking info -Porcelain Format -~~~~~~~~~~~~~~~~ +Porcelain Format Version 1 +~~~~~~~~~~~~~~~~~~~~~~~~~~ -The porcelain format is similar to the short format, but is guaranteed +Version 1 porcelain format is similar to the short format, but is guaranteed not to change in a backwards-incompatible way between Git versions or based on user configuration. This makes it ideal for parsing by scripts. The description of the short format above also describes the porcelain @@ -207,6 +210,123 @@ field from the first filename). Third, filenames containing special characters are not specially formatted; no quoting or backslash-escaping is performed. +Porcelain Format Version 2 +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Version 2 format adds more detailed information about the state of +the worktree and changed items. Version 2 also defines an extensible +set of easy to parse optional headers. + +Header lines start with "#" and are added in response to specific +command line arguments. Parsers should ignore headers they +don't recognize. + +### Branch Headers + +If `--branch` is given, a series of header lines are printed with +information about the current branch. + + Line Notes + ------------------------------------------------------------ + # branch.oid <commit> | (initial) Current commit. + # branch.head <branch> | (detached) Current branch. + # branch.upstream <upstream_branch> If upstream is set. + # branch.ab +<ahead> -<behind> If upstream is set and + the commit is present. + ------------------------------------------------------------ + +### Changed Tracked Entries + +Following the headers, a series of lines are printed for tracked +entries. One of three different line formats may be used to describe +an entry depending on the type of change. Tracked entries are printed +in an undefined order; parsers should allow for a mixture of the 3 +line types in any order. + +Ordinary changed entries have the following format: + + 1 <XY> <sub> <mH> <mI> <mW> <hH> <hI> <path> + +Renamed or copied entries have the following format: + + 2 <XY> <sub> <mH> <mI> <mW> <hH> <hI> <X><score> <path><sep><origPath> + + Field Meaning + -------------------------------------------------------- + <XY> A 2 character field containing the staged and + unstaged XY values described in the short format, + with unchanged indicated by a "." rather than + a space. + <sub> A 4 character field describing the submodule state. + "N..." when the entry is not a submodule. + "S<c><m><u>" when the entry is a submodule. + <c> is "C" if the commit changed; otherwise ".". + <m> is "M" if it has tracked changes; otherwise ".". + <u> is "U" if there are untracked changes; otherwise ".". + <mH> The octal file mode in HEAD. + <mI> The octal file mode in the index. + <mW> The octal file mode in the worktree. + <hH> The object name in HEAD. + <hI> The object name in the index. + <X><score> The rename or copy score (denoting the percentage + of similarity between the source and target of the + move or copy). For example "R100" or "C75". + <path> The pathname. In a renamed/copied entry, this + is the path in the index and in the working tree. + <sep> When the `-z` option is used, the 2 pathnames are separated + with a NUL (ASCII 0x00) byte; otherwise, a tab (ASCII 0x09) + byte separates them. + <origPath> The pathname in the commit at HEAD. This is only + present in a renamed/copied entry, and tells + where the renamed/copied contents came from. + -------------------------------------------------------- + +Unmerged entries have the following format; the first character is +a "u" to distinguish from ordinary changed entries. + + u <xy> <sub> <m1> <m2> <m3> <mW> <h1> <h2> <h3> <path> + + Field Meaning + -------------------------------------------------------- + <XY> A 2 character field describing the conflict type + as described in the short format. + <sub> A 4 character field describing the submodule state + as described above. + <m1> The octal file mode in stage 1. + <m2> The octal file mode in stage 2. + <m3> The octal file mode in stage 3. + <mW> The octal file mode in the worktree. + <h1> The object name in stage 1. + <h2> The object name in stage 2. + <h3> The object name in stage 3. + <path> The pathname. + -------------------------------------------------------- + +### Other Items + +Following the tracked entries (and if requested), a series of +lines will be printed for untracked and then ignored items +found in the worktree. + +Untracked items have the following format: + + ? <path> + +Ignored items have the following format: + + ! <path> + +### Pathname Format Notes and -z + +When the `-z` option is given, pathnames are printed as is and +without any quoting and lines are terminated with a NUL (ASCII 0x00) +byte. + +Without the `-z` option, pathnames with "unusual" characters are +quoted as explained for the configuration variable `core.quotePath` +(see linkgit:git-config[1]). + + CONFIGURATION ------------- diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt index 1572f05..74bc620 100644 --- a/Documentation/git-submodule.txt +++ b/Documentation/git-submodule.txt @@ -9,18 +9,15 @@ git-submodule - Initialize, update or inspect submodules SYNOPSIS -------- [verse] -'git submodule' [--quiet] add [-b <branch>] [-f|--force] [--name <name>] - [--reference <repository>] [--depth <depth>] [--] <repository> [<path>] +'git submodule' [--quiet] add [<options>] [--] <repository> [<path>] 'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...] 'git submodule' [--quiet] init [--] [<path>...] -'git submodule' [--quiet] deinit [-f|--force] [--] <path>... -'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch] - [-f|--force] [--rebase|--merge] [--reference <repository>] - [--depth <depth>] [--recursive] [--] [<path>...] -'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>] - [commit] [--] [<path>...] +'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...) +'git submodule' [--quiet] update [<options>] [--] [<path>...] +'git submodule' [--quiet] summary [<options>] [--] [<path>...] 'git submodule' [--quiet] foreach [--recursive] <command> 'git submodule' [--quiet] sync [--recursive] [--] [<path>...] +'git submodule' [--quiet] absorbgitdirs [--] [<path>...] DESCRIPTION @@ -61,7 +58,7 @@ if you choose to go that route. COMMANDS -------- -add:: +add [-b <branch>] [-f|--force] [--name <name>] [--reference <repository>] [--depth <depth>] [--] <repository> [<path>]:: Add the given repository as a submodule at the given path to the changeset to be committed next to the current project: the current project is termed the "superproject". @@ -76,13 +73,17 @@ configuration entries unless `--name` is used to specify a logical name. + <repository> is the URL of the new submodule's origin repository. This may be either an absolute URL, or (if it begins with ./ -or ../), the location relative to the superproject's origin +or ../), the location relative to the superproject's default remote repository (Please note that to specify a repository 'foo.git' which is located right next to a superproject 'bar.git', you'll have to use '../foo.git' instead of './foo.git' - as one might expect when following the rules for relative URLs - because the evaluation of relative URLs in Git is identical to that of relative directories). -If the superproject doesn't have an origin configured ++ +The default remote is the remote of the remote tracking branch +of the current branch. If no such remote tracking branch exists or +the HEAD is detached, "origin" is assumed to be the default remote. +If the superproject doesn't have a default remote configured the superproject is its own authoritative upstream and the current working directory is used instead. + @@ -102,7 +103,7 @@ together in the same relative location, and only the superproject's URL needs to be provided: git-submodule will correctly locate the submodule using the relative URL in .gitmodules. -status:: +status [--cached] [--recursive] [--] [<path>...]:: Show the status of the submodules. This will print the SHA-1 of the currently checked out commit for each submodule, along with the submodule path and the output of 'git describe' for the @@ -119,48 +120,59 @@ submodules with respect to the commit recorded in the index or the HEAD, linkgit:git-status[1] and linkgit:git-diff[1] will provide that information too (and can also report changes to a submodule's work tree). -init:: +init [--] [<path>...]:: Initialize the submodules recorded in the index (which were - added and committed elsewhere) by copying submodule - names and urls from .gitmodules to .git/config. - Optional <path> arguments limit which submodules will be initialized. - It will also copy the value of `submodule.$name.update` into - .git/config. - The key used in .git/config is `submodule.$name.url`. - This command does not alter existing information in .git/config. - You can then customize the submodule clone URLs in .git/config - for your local setup and proceed to `git submodule update`; - you can also just use `git submodule update --init` without - the explicit 'init' step if you do not intend to customize - any submodule locations. - -deinit:: + added and committed elsewhere) by setting `submodule.$name.url` + in .git/config. It uses the same setting from .gitmodules as + a template. If the URL is relative, it will be resolved using + the default remote. If there is no default remote, the current + repository will be assumed to be upstream. ++ +Optional <path> arguments limit which submodules will be initialized. +If no path is specified and submodule.active has been configured, submodules +configured to be active will be initialized, otherwise all submodules are +initialized. ++ +When present, it will also copy the value of `submodule.$name.update`. +This command does not alter existing information in .git/config. +You can then customize the submodule clone URLs in .git/config +for your local setup and proceed to `git submodule update`; +you can also just use `git submodule update --init` without +the explicit 'init' step if you do not intend to customize +any submodule locations. ++ +See the add subcommand for the defintion of default remote. + +deinit [-f|--force] (--all|[--] <path>...):: Unregister the given submodules, i.e. remove the whole `submodule.$name` section from .git/config together with their work tree. Further calls to `git submodule update`, `git submodule foreach` and `git submodule sync` will skip any unregistered submodules until they are initialized again, so use this command if you don't want to - have a local checkout of the submodule in your work tree anymore. If + have a local checkout of the submodule in your working tree anymore. If you really want to remove a submodule from the repository and commit that use linkgit:git-rm[1] instead. + -If `--force` is specified, the submodule's work tree will be removed even if -it contains local modifications. +When the command is run without pathspec, it errors out, +instead of deinit-ing everything, to prevent mistakes. ++ +If `--force` is specified, the submodule's working tree will +be removed even if it contains local modifications. -update:: +update [--init] [--remote] [-N|--no-fetch] [--[no-]recommend-shallow] [-f|--force] [--checkout|--rebase|--merge] [--reference <repository>] [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...]:: + -- Update the registered submodules to match what the superproject expects by cloning missing submodules and updating the working tree of the submodules. The "updating" can be done in several ways depending on command line options and the value of `submodule.<name>.update` -configuration variable. Supported update procedures are: +configuration variable. The command line option takes precedence over +the configuration variable. if neither is given, a checkout is performed. +update procedures supported both from the command line as well as setting +`submodule.<name>.update`: checkout;; the commit recorded in the superproject will be - checked out in the submodule on a detached HEAD. This is - done when `--checkout` option is given, or no option is - given, and `submodule.<name>.update` is unset, or if it is - set to 'checkout'. + checked out in the submodule on a detached HEAD. + If `--force` is specified, the submodule will be checked out (using `git checkout --force` if appropriate), even if the commit specified @@ -168,23 +180,21 @@ in the index of the containing repository already matches the commit checked out in the submodule. rebase;; the current branch of the submodule will be rebased - onto the commit recorded in the superproject. This is done - when `--rebase` option is given, or no option is given, and - `submodule.<name>.update` is set to 'rebase'. + onto the commit recorded in the superproject. merge;; the commit recorded in the superproject will be merged - into the current branch in the submodule. This is done - when `--merge` option is given, or no option is given, and - `submodule.<name>.update` is set to 'merge'. + into the current branch in the submodule. + +The following procedures are only available via the `submodule.<name>.update` +configuration variable: custom command;; arbitrary shell command that takes a single argument (the sha1 of the commit recorded in the - superproject) is executed. This is done when no option is - given, and `submodule.<name>.update` has the form of - '!command'. + superproject) is executed. When `submodule.<name>.update` + is set to '!command', the remainder after the exclamation mark + is the custom command. -When no option is given and `submodule.<name>.update` is set to 'none', -the submodule is not updated. + none;; the submodule is not updated. If the submodule is not yet initialized, and you just want to use the setting as stored in .gitmodules, you can automatically initialize the @@ -193,7 +203,7 @@ submodule with the `--init` option. If `--recursive` is specified, this command will recurse into the registered submodules, and update any nested submodules within. -- -summary:: +summary [--cached|--files] [(-n|--summary-limit) <n>] [commit] [--] [<path>...]:: Show commit summary between the given commit (defaults to HEAD) and working tree/index. For a submodule in question, a series of commits in the submodule between the given super project commit and the @@ -206,7 +216,7 @@ summary:: Using the `--submodule=log` option with linkgit:git-diff[1] will provide that information too. -foreach:: +foreach [--recursive] <command>:: Evaluates an arbitrary shell command in each checked out submodule. The command has access to the variables $name, $path, $sha1 and $toplevel: @@ -223,11 +233,14 @@ foreach:: the processing to terminate. This can be overridden by adding '|| :' to the end of the command. + -As an example, +git submodule foreach \'echo $path {backtick}git -rev-parse HEAD{backtick}'+ will show the path and currently checked out -commit for each submodule. +As an example, the command below will show the path and currently +checked out commit for each submodule: ++ +-------------- +git submodule foreach 'echo $path `git rev-parse HEAD`' +-------------- -sync:: +sync [--recursive] [--] [<path>...]:: Synchronizes submodules' remote URL configuration setting to the value specified in .gitmodules. It will only affect those submodules which already have a URL entry in .git/config (that is the @@ -241,24 +254,44 @@ sync:: If `--recursive` is specified, this command will recurse into the registered submodules, and sync any nested submodules within. +absorbgitdirs:: + If a git directory of a submodule is inside the submodule, + move the git directory of the submodule into its superprojects + `$GIT_DIR/modules` path and then connect the git directory and + its working directory by setting the `core.worktree` and adding + a .git file pointing to the git directory embedded in the + superprojects git directory. ++ +A repository that was cloned independently and later added as a submodule or +old setups have the submodules git directory inside the submodule instead of +embedded into the superprojects git directory. ++ +This command is recursive by default. + OPTIONS ------- -q:: --quiet:: Only print error messages. +--all:: + This option is only valid for the deinit command. Unregister all + submodules in the working tree. + -b:: --branch:: Branch of repository to add as submodule. The name of the branch is recorded as `submodule.<name>.branch` in - `.gitmodules` for `update --remote`. + `.gitmodules` for `update --remote`. A special value of `.` is used to + indicate that the name of the branch in the submodule should be the + same name as the current branch in the current repository. -f:: --force:: This option is only valid for add, deinit and update commands. When running add, allow adding an otherwise ignored submodule path. - When running deinit the submodule work trees will be removed even if - they contain local changes. + When running deinit the submodule working trees will be removed even + if they contain local changes. When running update (only effective with the checkout procedure), throw away local changes in submodules when switching to a different commit; and always run a checkout operation in the @@ -377,6 +410,17 @@ for linkgit:git-clone[1]'s `--reference` and `--shared` options carefully. clone with a history truncated to the specified number of revisions. See linkgit:git-clone[1] +--[no-]recommend-shallow:: + This option is only valid for the update command. + The initial clone of a submodule will use the recommended + `submodule.<name>.shallow` as provided by the .gitmodules file + by default. To ignore the suggestions use `--no-recommend-shallow`. + +-j <n>:: +--jobs <n>:: + This option is only valid for the update command. + Clone new submodules in parallel with as many jobs. + Defaults to the `submodule.fetchJobs` option. <path>...:: Paths to submodule(s). When specified this will restrict the command diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index 0c0f60b..9bee9b0 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -98,11 +98,11 @@ your Perl's Getopt::Long is < v2.37). --ignore-paths=<regex>;; When passed to 'init' or 'clone' this regular expression will be preserved as a config key. See 'fetch' for a description - of '--ignore-paths'. + of `--ignore-paths`. --include-paths=<regex>;; When passed to 'init' or 'clone' this regular expression will be preserved as a config key. See 'fetch' for a description - of '--include-paths'. + of `--include-paths`. --no-minimize-url;; When tracking multiple directories (using --stdlayout, --branches, or --tags options), git svn will attempt to connect @@ -110,7 +110,7 @@ your Perl's Getopt::Long is < v2.37). repository. This default allows better tracking of history if entire projects are moved within a repository, but may cause issues on repositories where read access restrictions are in - place. Passing '--no-minimize-url' will allow git svn to + place. Passing `--no-minimize-url` will allow git svn to accept URLs as-is without attempting to connect to a higher level directory. This option is off by default when only one URL/branch is tracked (it would do little good). @@ -141,7 +141,7 @@ the same local time zone. --ignore-paths=<regex>;; This allows one to specify a Perl regular expression that will cause skipping of all matching paths from checkout from SVN. - The '--ignore-paths' option should match for every 'fetch' + The `--ignore-paths` option should match for every 'fetch' (including automatic fetches due to 'clone', 'dcommit', 'rebase', etc) on a given repository. + @@ -170,10 +170,10 @@ Skip "branches" and "tags" of first level directories;; --include-paths=<regex>;; This allows one to specify a Perl regular expression that will cause the inclusion of only matching paths from checkout from SVN. - The '--include-paths' option should match for every 'fetch' + The `--include-paths` option should match for every 'fetch' (including automatic fetches due to 'clone', 'dcommit', - 'rebase', etc) on a given repository. '--ignore-paths' takes - precedence over '--include-paths'. + 'rebase', etc) on a given repository. `--ignore-paths` takes + precedence over `--include-paths`. + [verse] config key: svn-remote.<name>.include-paths @@ -191,7 +191,7 @@ config key: svn-remote.<name>.include-paths or if a second argument is passed; it will create a directory and work within that. It accepts all arguments that the 'init' and 'fetch' commands accept; with the exception of - '--fetch-all' and '--parent'. After a repository is cloned, + `--fetch-all` and `--parent`. After a repository is cloned, the 'fetch' command will be able to update revisions without affecting the working tree; and the 'rebase' command will be able to update the working tree with the latest changes. @@ -216,7 +216,7 @@ it preserves linear history with 'git rebase' instead of 'git merge' for ease of dcommitting with 'git svn'. + This accepts all options that 'git svn fetch' and 'git rebase' -accept. However, '--fetch-all' only fetches from the current +accept. However, `--fetch-all` only fetches from the current [svn-remote], and not all [svn-remote] definitions. + Like 'git rebase'; this requires that the working tree be clean @@ -459,6 +459,20 @@ Any other arguments are passed directly to 'git log' Gets the Subversion property given as the first argument, for a file. A specific revision can be specified with -r/--revision. +'propset':: + Sets the Subversion property given as the first argument, to the + value given as the second argument for the file given as the + third argument. ++ +Example: ++ +------------------------------------------------------------------------ +git svn propset svn:keywords "FreeBSD=%H" devel/py-tipper/Makefile +------------------------------------------------------------------------ ++ +This will set the property 'svn:keywords' to 'FreeBSD=%H' for the file +'devel/py-tipper/Makefile'. + 'show-externals':: Shows the Subversion externals. Use -r/--revision to specify a specific revision. @@ -611,6 +625,9 @@ config key: svn.authorsfile with the committer name as the first argument. The program is expected to return a single line of the form "Name <email>", which will be treated as if included in the authors file. ++ +[verse] +config key: svn.authorsProg -q:: --quiet:: @@ -647,13 +664,19 @@ creating the branch or tag. When retrieving svn commits into Git (as part of 'fetch', 'rebase', or 'dcommit' operations), look for the first `From:` or `Signed-off-by:` line in the log message and use that as the author string. ++ +[verse] +config key: svn.useLogAuthor + --add-author-from:: When committing to svn from Git (as part of 'commit-diff', 'set-tree' or 'dcommit' operations), if the existing log message doesn't already have a `From:` or `Signed-off-by:` line, append a `From:` line based on the Git commit's author string. If you use this, then `--use-log-author` will retrieve a valid author string for all commits. - ++ +[verse] +config key: svn.addAuthorFrom ADVANCED OPTIONS ---------------- @@ -748,7 +771,7 @@ svn-remote.<name>.rewriteUUID:: svn-remote.<name>.pushurl:: - Similar to Git's 'remote.<name>.pushurl', this key is designed + Similar to Git's `remote.<name>.pushurl`, this key is designed to be used in cases where 'url' points to an SVN repository via a read-only transport, to provide an alternate read/write transport. It is assumed that both keys point to the same @@ -905,7 +928,7 @@ parent of the branch. However, it is possible that there is no suitable Git commit to serve as parent. This will happen, among other reasons, if the SVN branch is a copy of a revision that was not fetched by 'git svn' (e.g. because it is an old revision that was skipped with -'--revision'), or if in SVN a directory was copied that is not tracked +`--revision`), or if in SVN a directory was copied that is not tracked by 'git svn' (such as a branch that is not tracked at all, or a subdirectory of a tracked branch). In these cases, 'git svn' will still create a Git branch, but instead of using an existing Git commit as the @@ -982,12 +1005,12 @@ directories in the working copy. While this is the easiest way to get a copy of a complete repository, for projects with many branches it will lead to a working copy many times larger than just the trunk. Thus for projects using the standard directory structure (trunk/branches/tags), -it is recommended to clone with option '--stdlayout'. If the project +it is recommended to clone with option `--stdlayout`. If the project uses a non-standard structure, and/or if branches and tags are not required, it is easiest to only clone one directory (typically trunk), without giving any repository layout options. If the full history with -branches and tags is required, the options '--trunk' / '--branches' / -'--tags' must be used. +branches and tags is required, the options `--trunk` / `--branches` / +`--tags` must be used. When using multiple --branches or --tags, 'git svn' does not automatically handle name collisions (for example, if two branches from different paths have @@ -1034,6 +1057,8 @@ listed below are allowed: url = http://server.org/svn fetch = trunk/project-a:refs/remotes/project-a/trunk branches = branches/*/project-a:refs/remotes/project-a/branches/* + branches = branches/release_*:refs/remotes/project-a/branches/release_* + branches = branches/re*se:refs/remotes/project-a/branches/* tags = tags/*/project-a:refs/remotes/project-a/tags/* ------------------------------------------------------------------------ @@ -1044,6 +1069,16 @@ independent path component (surrounded by '/' or EOL). This type of configuration is not automatically created by 'init' and should be manually entered with a text-editor or using 'git config'. +Also note that only one asterisk is allowed per word. For example: + + branches = branches/re*se:refs/remotes/project-a/branches/* + +will match branches 'release', 'rese', 're123se', however + + branches = branches/re*s*e:refs/remotes/project-a/branches/* + +will produce an error. + It is also possible to fetch a subset of branches or tags by using a comma-separated list of names within braces. For example: diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 7220e5e..f8a0b78 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -12,10 +12,11 @@ SYNOPSIS 'git tag' [-a | -s | -u <keyid>] [-f] [-m <msg> | -F <file>] <tagname> [<commit> | <object>] 'git tag' -d <tagname>... -'git tag' [-n[<num>]] -l [--contains <commit>] [--points-at <object>] - [--column[=<options>] | --no-column] [--create-reflog] [--sort=<key>] - [--format=<format>] [--[no-]merged [<commit>]] [<pattern>...] -'git tag' -v <tagname>... +'git tag' [-n[<num>]] -l [--contains <commit>] [--contains <commit>] + [--points-at <object>] [--column[=<options>] | --no-column] + [--create-reflog] [--sort=<key>] [--format=<format>] + [--[no-]merged [<commit>]] [<pattern>...] +'git tag' -v [--format=<format>] <tagname>... DESCRIPTION ----------- @@ -78,22 +79,28 @@ OPTIONS -v:: --verify:: - Verify the gpg signature of the given tag names. + Verify the GPG signature of the given tag names. -n<num>:: <num> specifies how many lines from the annotation, if any, - are printed when using -l. - The default is not to print any annotation lines. - If no number is given to `-n`, only the first line is printed. - If the tag is not annotated, the commit message is displayed instead. - --l <pattern>:: ---list <pattern>:: - List tags with names that match the given pattern (or all if no - pattern is given). Running "git tag" without arguments also - lists all tags. The pattern is a shell wildcard (i.e., matched - using fnmatch(3)). Multiple patterns may be given; if any of - them matches, the tag is shown. + are printed when using -l. Implies `--list`. ++ +The default is not to print any annotation lines. +If no number is given to `-n`, only the first line is printed. +If the tag is not annotated, the commit message is displayed instead. + +-l:: +--list:: + List tags. With optional `<pattern>...`, e.g. `git tag --list + 'v-*'`, list only the tags that match the pattern(s). ++ +Running "git tag" without arguments also lists all tags. The pattern +is a shell wildcard (i.e., matched using fnmatch(3)). Multiple +patterns may be given; if any of them matches, the tag is shown. ++ +This option is implicitly supplied if any other list-like option such +as `--contains` is provided. See the documentation for each of those +options for details. --sort=<key>:: Sort based on the key given. Prefix `-` to sort in @@ -101,13 +108,17 @@ OPTIONS multiple times, in which case the last key becomes the primary key. Also supports "version:refname" or "v:refname" (tag names are treated as versions). The "version:refname" sort - order can also be affected by the - "versionsort.prereleaseSuffix" configuration variable. + order can also be affected by the "versionsort.suffix" + configuration variable. The keys supported are the same as those in `git for-each-ref`. - Sort order defaults to the value configured for the 'tag.sort' + Sort order defaults to the value configured for the `tag.sort` variable if it exists, or lexicographic order otherwise. See linkgit:git-config[1]. +-i:: +--ignore-case:: + Sorting and filtering tags are case insensitive. + --column[=<options>]:: --no-column:: Display tag listing in columns. See configuration variable @@ -118,10 +129,23 @@ This option is only applicable when listing tags without annotation lines. --contains [<commit>]:: Only list tags which contain the specified commit (HEAD if not - specified). + specified). Implies `--list`. + +--no-contains [<commit>]:: + Only list tags which don't contain the specified commit (HEAD if + not specified). Implies `--list`. + +--merged [<commit>]:: + Only list tags whose commits are reachable from the specified + commit (`HEAD` if not specified), incompatible with `--no-merged`. + +--no-merged [<commit>]:: + Only list tags whose commits are not reachable from the specified + commit (`HEAD` if not specified), incompatible with `--merged`. --points-at <object>:: - Only list tags of the given object. + Only list tags of the given object (HEAD if not + specified). Implies `--list`. -m <msg>:: --message=<msg>:: @@ -146,7 +170,11 @@ This option is only applicable when listing tags without annotation lines. 'strip' removes both whitespace and commentary. --create-reflog:: - Create a reflog for the tag. + Create a reflog for the tag. To globally enable reflogs for tags, see + `core.logAllRefUpdates` in linkgit:git-config[1]. + The negated form `--no-create-reflog` only overrides an earlier + `--create-reflog`, but currently does not negate the setting of + `core.logallrefupdates`. <tagname>:: The name of the tag to create, delete, or describe. @@ -163,12 +191,7 @@ This option is only applicable when listing tags without annotation lines. A string that interpolates `%(fieldname)` from the object pointed at by a ref being shown. The format is the same as that of linkgit:git-for-each-ref[1]. When unspecified, - defaults to `%(refname:short)`. - ---[no-]merged [<commit>]:: - Only list tags whose tips are reachable, or not reachable - if '--no-merged' is used, from the specified commit ('HEAD' - if not specified). + defaults to `%(refname:strip=2)`. CONFIGURATION ------------- @@ -253,9 +276,8 @@ On Automatic following ~~~~~~~~~~~~~~~~~~~~~~ If you are following somebody else's tree, you are most likely -using remote-tracking branches (`refs/heads/origin` in traditional -layout, or `refs/remotes/origin/master` in the separate-remote -layout). You usually want the tags from the other end. +using remote-tracking branches (eg. `refs/remotes/origin/master`). +You usually want the tags from the other end. On the other hand, if you are fetching because you would want a one-shot merge from somebody else, you typically do not want to diff --git a/Documentation/git-unpack-objects.txt b/Documentation/git-unpack-objects.txt index 3e887d1..b3de50d 100644 --- a/Documentation/git-unpack-objects.txt +++ b/Documentation/git-unpack-objects.txt @@ -44,6 +44,9 @@ OPTIONS --strict:: Don't write objects with broken content or links. +--max-input-size=<size>:: + Die, if the pack is larger than <size>. + GIT --- Part of the linkgit:git[1] suite diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt index c6cbed1..1579abf 100644 --- a/Documentation/git-update-index.txt +++ b/Documentation/git-update-index.txt @@ -102,7 +102,7 @@ thus, in case the assumed-untracked file is changed upstream, you will need to handle the situation manually. --really-refresh:: - Like '--refresh', but checks stat information unconditionally, + Like `--refresh`, but checks stat information unconditionally, without regard to the "assume unchanged" setting. --[no-]skip-worktree:: @@ -163,14 +163,16 @@ may not support it yet. --split-index:: --no-split-index:: - Enable or disable split index mode. If enabled, the index is - split into two files, $GIT_DIR/index and $GIT_DIR/sharedindex.<SHA-1>. - Changes are accumulated in $GIT_DIR/index while the shared - index file contains all index entries stays unchanged. If - split-index mode is already enabled and `--split-index` is - given again, all changes in $GIT_DIR/index are pushed back to - the shared index file. This mode is designed for very large - indexes that take a significant amount of time to read or write. + Enable or disable split index mode. If split-index mode is + already enabled and `--split-index` is given again, all + changes in $GIT_DIR/index are pushed back to the shared index + file. ++ +These options take effect whatever the value of the `core.splitIndex` +configuration variable (see linkgit:git-config[1]). But a warning is +emitted when the change goes against the configured value, as the +configured value will take effect next time the index is read and this +will remove the intended effect of the option. --untracked-cache:: --no-untracked-cache:: @@ -211,7 +213,7 @@ will remove the intended effect of the option. Using --refresh --------------- -'--refresh' does not calculate a new sha1 file or bring the index +`--refresh` does not calculate a new sha1 file or bring the index up-to-date for mode/content changes. But what it *does* do is to "re-match" the stat information of a file with the index, so that you can refresh the index for a file that hasn't been changed but where @@ -222,7 +224,7 @@ up the stat index details with the proper files. Using --cacheinfo or --info-only -------------------------------- -'--cacheinfo' is used to register a file that is not in the +`--cacheinfo` is used to register a file that is not in the current working directory. This is useful for minimum-checkout merging. @@ -232,12 +234,12 @@ To pretend you have a file with mode and sha1 at path, say: $ git update-index --cacheinfo <mode>,<sha1>,<path> ---------------- -'--info-only' is used to register files without placing them in the object +`--info-only` is used to register files without placing them in the object database. This is useful for status-only repositories. -Both '--cacheinfo' and '--info-only' behave similarly: the index is updated -but the object database isn't. '--cacheinfo' is useful when the object is -in the database but the file isn't available locally. '--info-only' is +Both `--cacheinfo` and `--info-only` behave similarly: the index is updated +but the object database isn't. `--cacheinfo` is useful when the object is +in the database but the file isn't available locally. `--info-only` is useful when the file is available, but you do not wish to update the object database. @@ -388,6 +390,31 @@ Although this bit looks similar to assume-unchanged bit, its goal is different from assume-unchanged bit's. Skip-worktree also takes precedence over assume-unchanged bit when both are set. +Split index +----------- + +This mode is designed for repositories with very large indexes, and +aims at reducing the time it takes to repeatedly write these indexes. + +In this mode, the index is split into two files, $GIT_DIR/index and +$GIT_DIR/sharedindex.<SHA-1>. Changes are accumulated in +$GIT_DIR/index, the split index, while the shared index file contains +all index entries and stays unchanged. + +All changes in the split index are pushed back to the shared index +file when the number of entries in the split index reaches a level +specified by the splitIndex.maxPercentChange config variable (see +linkgit:git-config[1]). + +Each time a new shared index file is created, the old shared index +files are deleted if their modification time is older than what is +specified by the splitIndex.sharedIndexExpire config variable (see +linkgit:git-config[1]). + +To avoid deleting a shared index file that is still used, its +modification time is updated to the current time everytime a new split +index based on the shared index file is either created or read from. + Untracked cache --------------- diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt index 0abc806..822ad59 100644 --- a/Documentation/git-upload-pack.txt +++ b/Documentation/git-upload-pack.txt @@ -9,8 +9,8 @@ git-upload-pack - Send objects packed back to git-fetch-pack SYNOPSIS -------- [verse] -'git-upload-pack' [--strict] [--timeout=<n>] <directory> - +'git-upload-pack' [--[no-]strict] [--timeout=<n>] [--stateless-rpc] + [--advertise-refs] <directory> DESCRIPTION ----------- Invoked by 'git fetch-pack', learns what @@ -25,12 +25,22 @@ repository. For push operations, see 'git send-pack'. OPTIONS ------- ---strict:: +--[no-]strict:: Do not try <directory>/.git/ if <directory> is no Git directory. --timeout=<n>:: Interrupt transfer after <n> seconds of inactivity. +--stateless-rpc:: + Perform only a single read-write cycle with stdin and stdout. + This fits with the HTTP POST request processing model where + a program may read the request, write a response, and must exit. + +--advertise-refs:: + Only the initial ref advertisement is output, and the program exits + immediately. This fits with the HTTP GET request model, where + no request content is received but a response must be produced. + <directory>:: The repository to sync from. diff --git a/Documentation/git-verify-commit.txt b/Documentation/git-verify-commit.txt index ecf4da1..92097f6 100644 --- a/Documentation/git-verify-commit.txt +++ b/Documentation/git-verify-commit.txt @@ -12,7 +12,7 @@ SYNOPSIS DESCRIPTION ----------- -Validates the gpg signature created by 'git commit -S'. +Validates the GPG signature created by 'git commit -S'. OPTIONS ------- diff --git a/Documentation/git-verify-tag.txt b/Documentation/git-verify-tag.txt index d590edc..0b8075d 100644 --- a/Documentation/git-verify-tag.txt +++ b/Documentation/git-verify-tag.txt @@ -8,7 +8,7 @@ git-verify-tag - Check the GPG signature of tags SYNOPSIS -------- [verse] -'git verify-tag' <tag>... +'git verify-tag' [--format=<format>] <tag>... DESCRIPTION ----------- diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt index 16ede5b..2d6b09a 100644 --- a/Documentation/git-web--browse.txt +++ b/Documentation/git-web--browse.txt @@ -62,14 +62,14 @@ CONF.VAR (from -c option) and web.browser ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The web browser can be specified using a configuration variable passed -with the -c (or --config) command-line option, or the 'web.browser' +with the -c (or --config) command-line option, or the `web.browser` configuration variable if the former is not used. browser.<tool>.path ~~~~~~~~~~~~~~~~~~~ You can explicitly provide a full path to your preferred browser by -setting the configuration variable 'browser.<tool>.path'. For example, +setting the configuration variable `browser.<tool>.path`. For example, you can configure the absolute path to firefox by setting 'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool is available in PATH. @@ -79,7 +79,7 @@ browser.<tool>.cmd When the browser, specified by options or configuration variables, is not among the supported ones, then the corresponding -'browser.<tool>.cmd' configuration variable will be looked up. If this +`browser.<tool>.cmd` configuration variable will be looked up. If this variable exists then 'git web{litdd}browse' will treat the specified tool as a custom command and will use a shell eval to run the command with the URLs passed as arguments. @@ -110,7 +110,7 @@ Note about git-config --global ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Note that these configuration variables should probably be set using -the '--global' flag, for example like this: +the `--global` flag, for example like this: ------------------------------------------------ $ git config --global web.browser firefox diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt index 5b9ad04..553cf84 100644 --- a/Documentation/git-worktree.txt +++ b/Documentation/git-worktree.txt @@ -9,9 +9,11 @@ git-worktree - Manage multiple working trees SYNOPSIS -------- [verse] -'git worktree add' [-f] [--detach] [-b <new-branch>] <path> [<branch>] -'git worktree prune' [-n] [-v] [--expire <expire>] +'git worktree add' [-f] [--detach] [--checkout] [-b <new-branch>] <path> [<branch>] 'git worktree list' [--porcelain] +'git worktree lock' [--reason <string>] <worktree> +'git worktree prune' [-n] [-v] [--expire <expire>] +'git worktree unlock' <worktree> DESCRIPTION ----------- @@ -32,17 +34,14 @@ The working tree's administrative files in the repository (see `git worktree prune` in the main or any linked working tree to clean up any stale administrative files. -If you move a linked working tree to another file system, or -within a file system that does not support hard links, you need to run -at least one git command inside the linked working tree -(e.g. `git status`) in order to update its administrative files in the -repository so that they do not get automatically pruned. +If you move a linked working tree, you need to manually update the +administrative files so that they do not get pruned automatically. See +section "DETAILS" for more information. If a linked working tree is stored on a portable device or network share which is not always mounted, you can prevent its administrative files from -being pruned by creating a file named 'locked' alongside the other -administrative files, optionally containing a plain text reason that -pruning should be suppressed. See section "DETAILS" for more information. +being pruned by issuing the `git worktree lock` command, optionally +specifying `--reason` to explain why the working tree is locked. COMMANDS -------- @@ -50,16 +49,13 @@ add <path> [<branch>]:: Create `<path>` and checkout `<branch>` into it. The new working directory is linked to the current repository, sharing everything except working -directory specific files such as HEAD, index, etc. +directory specific files such as HEAD, index, etc. `-` may also be +specified as `<branch>`; it is synonymous with `@{-1}`. + -If `<branch>` is omitted and neither `-b` nor `-B` nor `--detached` used, +If `<branch>` is omitted and neither `-b` nor `-B` nor `--detach` used, then, as a convenience, a new branch based at HEAD is created automatically, as if `-b $(basename <path>)` was specified. -prune:: - -Prune working tree information in $GIT_DIR/worktrees. - list:: List details of each worktree. The main worktree is listed first, followed by @@ -67,6 +63,22 @@ each of the linked worktrees. The output details include if the worktree is bare, the revision currently checked out, and the branch currently checked out (or 'detached HEAD' if none). +lock:: + +If a working tree is on a portable device or network share which +is not always mounted, lock it to prevent its administrative +files from being pruned automatically. This also prevents it from +being moved or deleted. Optionally, specify a reason for the lock +with `--reason`. + +prune:: + +Prune working tree information in $GIT_DIR/worktrees. + +unlock:: + +Unlock a working tree, allowing it to be pruned, moved or deleted. + OPTIONS ------- @@ -89,6 +101,12 @@ OPTIONS With `add`, detach HEAD in the new working tree. See "DETACHED HEAD" in linkgit:git-checkout[1]. +--[no-]checkout:: + By default, `add` checks out `<branch>`, however, `--no-checkout` can + be used to suppress checkout in order to make customizations, + such as configuring sparse-checkout. See "Sparse checkout" + in linkgit:git-read-tree[1]. + -n:: --dry-run:: With `prune`, do not remove anything; just report what it would @@ -106,6 +124,18 @@ OPTIONS --expire <time>:: With `prune`, only expire unused working trees older than <time>. +--reason <string>:: + With `lock`, an explanation why the working tree is locked. + +<worktree>:: + Working trees can be identified by path, either relative or + absolute. ++ +If the last path components in the working tree's path is unique among +working trees, it can be used to identify worktrees. For example if +you only have two working trees, at "/abc/def/ghi" and "/abc/def/ggg", +then "ghi" or "def/ghi" is enough to point to the former working tree. + DETAILS ------- Each linked working tree has a private sub-directory in the repository's @@ -137,9 +167,17 @@ thumb is do not make any assumption about whether a path belongs to $GIT_DIR or $GIT_COMMON_DIR when you need to directly access something inside $GIT_DIR. Use `git rev-parse --git-path` to get the final path. +If you move a linked working tree, you need to update the 'gitdir' file +in the entry's directory. For example, if a linked working tree is moved +to `/newpath/test-next` and its `.git` file points to +`/path/main/.git/worktrees/test-next`, then update +`/path/main/.git/worktrees/test-next/gitdir` to reference `/newpath/test-next` +instead. + To prevent a $GIT_DIR/worktrees entry from being pruned (which can be useful in some situations, such as when the -entry's working tree is stored on a portable device), add a file named +entry's working tree is stored on a portable device), use the +`git worktree lock` command, which adds a file named 'locked' to the entry's directory. The file contains the reason in plain text. For example, if a linked working tree's `.git` file points to `/path/main/.git/worktrees/test-next` then a file named @@ -215,8 +253,6 @@ performed manually, such as: - `remove` to remove a linked working tree and its administrative files (and warn if the working tree is dirty) - `mv` to move or rename a working tree and update its administrative files -- `lock` to prevent automatic pruning of administrative files (for instance, - for a working tree on a portable device) GIT --- diff --git a/Documentation/git.txt b/Documentation/git.txt index cbf157b..ecc1bb4 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -13,6 +13,7 @@ SYNOPSIS [--exec-path[=<path>]] [--html-path] [--man-path] [--info-path] [-p|--paginate|--no-pager] [--no-replace-objects] [--bare] [--git-dir=<path>] [--work-tree=<path>] [--namespace=<name>] + [--super-prefix=<path>] <command> [<args>] DESCRIPTION @@ -31,8 +32,8 @@ page to learn what commands Git offers. You can learn more about individual Git commands with "git help command". linkgit:gitcli[7] manual page gives you an overview of the command-line command syntax. -Formatted and hyperlinked version of the latest Git documentation -can be viewed at `http://git-htmldocs.googlecode.com/git/git.html`. +A formatted and hyperlinked copy of the latest Git documentation +can be viewed at `https://git.github.io/htmldocs/git.html`. ifdef::stalenotes[] [NOTE] @@ -43,27 +44,76 @@ unreleased) version of Git, that is available from the 'master' branch of the `git.git` repository. Documentation for older releases are available here: -* link:v2.6.4/git.html[documentation for release 2.6.4] +* link:v2.12.2/git.html[documentation for release 2.12.2] * release notes for + link:RelNotes/2.12.2.txt[2.12.2]. + link:RelNotes/2.12.1.txt[2.12.1]. + link:RelNotes/2.12.0.txt[2.12]. + +* link:v2.11.1/git.html[documentation for release 2.11.1] + +* release notes for + link:RelNotes/2.11.1.txt[2.11.1], + link:RelNotes/2.11.0.txt[2.11]. + +* link:v2.10.2/git.html[documentation for release 2.10.2] + +* release notes for + link:RelNotes/2.10.2.txt[2.10.2], + link:RelNotes/2.10.1.txt[2.10.1], + link:RelNotes/2.10.0.txt[2.10]. + +* link:v2.9.3/git.html[documentation for release 2.9.3] + +* release notes for + link:RelNotes/2.9.3.txt[2.9.3], + link:RelNotes/2.9.2.txt[2.9.2], + link:RelNotes/2.9.1.txt[2.9.1], + link:RelNotes/2.9.0.txt[2.9]. + +* link:v2.8.4/git.html[documentation for release 2.8.4] + +* release notes for + link:RelNotes/2.8.4.txt[2.8.4], + link:RelNotes/2.8.3.txt[2.8.3], + link:RelNotes/2.8.2.txt[2.8.2], + link:RelNotes/2.8.1.txt[2.8.1], + link:RelNotes/2.8.0.txt[2.8]. + +* link:v2.7.3/git.html[documentation for release 2.7.3] + +* release notes for + link:RelNotes/2.7.3.txt[2.7.3], + link:RelNotes/2.7.2.txt[2.7.2], + link:RelNotes/2.7.1.txt[2.7.1], + link:RelNotes/2.7.0.txt[2.7]. + +* link:v2.6.6/git.html[documentation for release 2.6.6] + +* release notes for + link:RelNotes/2.6.6.txt[2.6.6], + link:RelNotes/2.6.5.txt[2.6.5], link:RelNotes/2.6.4.txt[2.6.4], link:RelNotes/2.6.3.txt[2.6.3], link:RelNotes/2.6.2.txt[2.6.2], link:RelNotes/2.6.1.txt[2.6.1], link:RelNotes/2.6.0.txt[2.6]. -* link:v2.5.4/git.html[documentation for release 2.5.4] +* link:v2.5.5/git.html[documentation for release 2.5.5] * release notes for + link:RelNotes/2.5.5.txt[2.5.5], link:RelNotes/2.5.4.txt[2.5.4], link:RelNotes/2.5.3.txt[2.5.3], link:RelNotes/2.5.2.txt[2.5.2], link:RelNotes/2.5.1.txt[2.5.1], link:RelNotes/2.5.0.txt[2.5]. -* link:v2.4.10/git.html[documentation for release 2.4.10] +* link:v2.4.11/git.html[documentation for release 2.4.11] * release notes for + link:RelNotes/2.4.11.txt[2.4.11], link:RelNotes/2.4.10.txt[2.4.10], link:RelNotes/2.4.9.txt[2.4.9], link:RelNotes/2.4.8.txt[2.4.8], @@ -487,7 +537,7 @@ OPTIONS --help:: Prints the synopsis and a list of the most commonly used - commands. If the option '--all' or '-a' is given then all + commands. If the option `--all` or `-a` is given then all available commands are printed. If a Git command is named this option will bring up the manual page for that command. + @@ -551,7 +601,7 @@ foo.bar= ...`) sets `foo.bar` to the empty string. --git-dir=<path>:: Set the path to the repository. This can also be controlled by - setting the GIT_DIR environment variable. It can be an absolute + setting the `GIT_DIR` environment variable. It can be an absolute path or relative path to current working directory. --work-tree=<path>:: @@ -567,6 +617,11 @@ foo.bar= ...`) sets `foo.bar` to the empty string. details. Equivalent to setting the `GIT_NAMESPACE` environment variable. +--super-prefix=<path>:: + Currently for internal use only. Set a prefix which gives a path from + above a repository down to its root. One use is to give submodules + context about the superproject that invoked it. + --bare:: Treat the repository as a bare repository. If GIT_DIR environment is not set, it is set to the current working @@ -801,46 +856,52 @@ These environment variables apply to 'all' core Git commands. Nb: it is worth noting that they may be used/overridden by SCMS sitting above Git so take care if using a foreign front-end. -'GIT_INDEX_FILE':: +`GIT_INDEX_FILE`:: This environment allows the specification of an alternate index file. If not specified, the default of `$GIT_DIR/index` is used. -'GIT_INDEX_VERSION':: +`GIT_INDEX_VERSION`:: This environment variable allows the specification of an index version for new repositories. It won't affect existing index files. By default index file version 2 or 3 is used. See linkgit:git-update-index[1] for more information. -'GIT_OBJECT_DIRECTORY':: +`GIT_OBJECT_DIRECTORY`:: If the object storage directory is specified via this environment variable then the sha1 directories are created underneath - otherwise the default `$GIT_DIR/objects` directory is used. -'GIT_ALTERNATE_OBJECT_DIRECTORIES':: +`GIT_ALTERNATE_OBJECT_DIRECTORIES`:: Due to the immutable nature of Git objects, old objects can be archived into shared, read-only directories. This variable specifies a ":" separated (on Windows ";" separated) list of Git object directories which can be used to search for Git objects. New objects will not be written to these directories. - -'GIT_DIR':: - If the 'GIT_DIR' environment variable is set then it ++ + Entries that begin with `"` (double-quote) will be interpreted + as C-style quoted paths, removing leading and trailing + double-quotes and respecting backslash escapes. E.g., the value + `"path-with-\"-and-:-in-it":vanilla-path` has two paths: + `path-with-"-and-:-in-it` and `vanilla-path`. + +`GIT_DIR`:: + If the `GIT_DIR` environment variable is set then it specifies a path to use instead of the default `.git` for the base of the repository. - The '--git-dir' command-line option also sets this value. + The `--git-dir` command-line option also sets this value. -'GIT_WORK_TREE':: +`GIT_WORK_TREE`:: Set the path to the root of the working tree. - This can also be controlled by the '--work-tree' command-line + This can also be controlled by the `--work-tree` command-line option and the core.worktree configuration variable. -'GIT_NAMESPACE':: +`GIT_NAMESPACE`:: Set the Git namespace; see linkgit:gitnamespaces[7] for details. - The '--namespace' command-line option also sets this value. + The `--namespace` command-line option also sets this value. -'GIT_CEILING_DIRECTORIES':: +`GIT_CEILING_DIRECTORIES`:: This should be a colon-separated list of absolute paths. If set, it is a list of directories that Git should not chdir up into while looking for a repository directory (useful for @@ -853,19 +914,19 @@ Git so take care if using a foreign front-end. can add an empty entry to the list to tell Git that the subsequent entries are not symlinks and needn't be resolved; e.g., - 'GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink'. + `GIT_CEILING_DIRECTORIES=/maybe/symlink::/very/slow/non/symlink`. -'GIT_DISCOVERY_ACROSS_FILESYSTEM':: +`GIT_DISCOVERY_ACROSS_FILESYSTEM`:: When run in a directory that does not have ".git" repository directory, Git tries to find such a directory in the parent directories to find the top of the working tree, but by default it does not cross filesystem boundaries. This environment variable can be set to true to tell Git not to stop at filesystem - boundaries. Like 'GIT_CEILING_DIRECTORIES', this will not affect - an explicit repository directory set via 'GIT_DIR' or on the + boundaries. Like `GIT_CEILING_DIRECTORIES`, this will not affect + an explicit repository directory set via `GIT_DIR` or on the command line. -'GIT_COMMON_DIR':: +`GIT_COMMON_DIR`:: If this variable is set to a path, non-worktree files that are normally in $GIT_DIR will be taken from this path instead. Worktree-specific files such as HEAD or index are @@ -876,28 +937,28 @@ Git so take care if using a foreign front-end. Git Commits ~~~~~~~~~~~ -'GIT_AUTHOR_NAME':: -'GIT_AUTHOR_EMAIL':: -'GIT_AUTHOR_DATE':: -'GIT_COMMITTER_NAME':: -'GIT_COMMITTER_EMAIL':: -'GIT_COMMITTER_DATE':: +`GIT_AUTHOR_NAME`:: +`GIT_AUTHOR_EMAIL`:: +`GIT_AUTHOR_DATE`:: +`GIT_COMMITTER_NAME`:: +`GIT_COMMITTER_EMAIL`:: +`GIT_COMMITTER_DATE`:: 'EMAIL':: see linkgit:git-commit-tree[1] Git Diffs ~~~~~~~~~ -'GIT_DIFF_OPTS':: +`GIT_DIFF_OPTS`:: Only valid setting is "--unified=??" or "-u??" to set the number of context lines shown when a unified diff is created. This takes precedence over any "-U" or "--unified" option value passed on the Git diff command line. -'GIT_EXTERNAL_DIFF':: - When the environment variable 'GIT_EXTERNAL_DIFF' is set, the +`GIT_EXTERNAL_DIFF`:: + When the environment variable `GIT_EXTERNAL_DIFF` is set, the program named by it is called, instead of the diff invocation described above. For a path that is added, removed, or modified, - 'GIT_EXTERNAL_DIFF' is called with 7 parameters: + `GIT_EXTERNAL_DIFF` is called with 7 parameters: path old-file old-hex old-mode new-file new-hex new-mode + @@ -911,49 +972,49 @@ where: The file parameters can point at the user's working file (e.g. `new-file` in "git-diff-files"), `/dev/null` (e.g. `old-file` when a new file is added), or a temporary file (e.g. `old-file` in the -index). 'GIT_EXTERNAL_DIFF' should not worry about unlinking the -temporary file --- it is removed when 'GIT_EXTERNAL_DIFF' exits. +index). `GIT_EXTERNAL_DIFF` should not worry about unlinking the +temporary file --- it is removed when `GIT_EXTERNAL_DIFF` exits. + -For a path that is unmerged, 'GIT_EXTERNAL_DIFF' is called with 1 +For a path that is unmerged, `GIT_EXTERNAL_DIFF` is called with 1 parameter, <path>. + -For each path 'GIT_EXTERNAL_DIFF' is called, two environment variables, -'GIT_DIFF_PATH_COUNTER' and 'GIT_DIFF_PATH_TOTAL' are set. +For each path `GIT_EXTERNAL_DIFF` is called, two environment variables, +`GIT_DIFF_PATH_COUNTER` and `GIT_DIFF_PATH_TOTAL` are set. -'GIT_DIFF_PATH_COUNTER':: +`GIT_DIFF_PATH_COUNTER`:: A 1-based counter incremented by one for every path. -'GIT_DIFF_PATH_TOTAL':: +`GIT_DIFF_PATH_TOTAL`:: The total number of paths. other ~~~~~ -'GIT_MERGE_VERBOSITY':: +`GIT_MERGE_VERBOSITY`:: A number controlling the amount of output shown by the recursive merge strategy. Overrides merge.verbosity. See linkgit:git-merge[1] -'GIT_PAGER':: +`GIT_PAGER`:: This environment variable overrides `$PAGER`. If it is set to an empty string or to the value "cat", Git will not launch a pager. See also the `core.pager` option in linkgit:git-config[1]. -'GIT_EDITOR':: +`GIT_EDITOR`:: This environment variable overrides `$EDITOR` and `$VISUAL`. It is used by several Git commands when, on interactive mode, an editor is to be launched. See also linkgit:git-var[1] and the `core.editor` option in linkgit:git-config[1]. -'GIT_SSH':: -'GIT_SSH_COMMAND':: +`GIT_SSH`:: +`GIT_SSH_COMMAND`:: If either of these environment variables is set then 'git fetch' and 'git push' will use the specified command instead of 'ssh' when they need to connect to a remote system. The command will be given exactly two or four arguments: the 'username@host' (or just 'host') from the URL and the shell command to execute on that remote system, optionally preceded by - '-p' (literally) and the 'port' from the URL when it specifies + `-p` (literally) and the 'port' from the URL when it specifies something other than the default SSH port. + `$GIT_SSH_COMMAND` takes precedence over `$GIT_SSH`, and is interpreted @@ -966,18 +1027,24 @@ Usually it is easier to configure any desired options through your personal `.ssh/config` file. Please consult your ssh documentation for further details. -'GIT_ASKPASS':: +`GIT_SSH_VARIANT`:: + If this environment variable is set, it overrides Git's autodetection + whether `GIT_SSH`/`GIT_SSH_COMMAND`/`core.sshCommand` refer to OpenSSH, + plink or tortoiseplink. This variable overrides the config setting + `ssh.variant` that serves the same purpose. + +`GIT_ASKPASS`:: If this environment variable is set, then Git commands which need to acquire passwords or passphrases (e.g. for HTTP or IMAP authentication) will call this program with a suitable prompt as command-line argument - and read the password from its STDOUT. See also the 'core.askPass' + and read the password from its STDOUT. See also the `core.askPass` option in linkgit:git-config[1]. -'GIT_TERMINAL_PROMPT':: +`GIT_TERMINAL_PROMPT`:: If this environment variable is set to `0`, git will not prompt on the terminal (e.g., when asking for HTTP authentication). -'GIT_CONFIG_NOSYSTEM':: +`GIT_CONFIG_NOSYSTEM`:: Whether to skip reading settings from the system-wide `$(prefix)/etc/gitconfig` file. This environment variable can be used along with `$HOME` and `$XDG_CONFIG_HOME` to create a @@ -985,7 +1052,7 @@ for further details. temporarily to avoid using a buggy `/etc/gitconfig` file while waiting for someone with sufficient permissions to fix it. -'GIT_FLUSH':: +`GIT_FLUSH`:: If this environment variable is set to "1", then commands such as 'git blame' (in incremental mode), 'git rev-list', 'git log', 'git check-attr' and 'git check-ignore' will @@ -996,7 +1063,7 @@ for further details. not set, Git will choose buffered or record-oriented flushing based on whether stdout appears to be redirected to a file or not. -'GIT_TRACE':: +`GIT_TRACE`:: Enables general trace messages, e.g. alias expansion, built-in command execution and external command execution. + @@ -1017,21 +1084,21 @@ into it. Unsetting the variable, or setting it to empty, "0" or "false" (case insensitive) disables trace messages. -'GIT_TRACE_PACK_ACCESS':: +`GIT_TRACE_PACK_ACCESS`:: Enables trace messages for all accesses to any packs. For each access, the pack file name and an offset in the pack is recorded. This may be helpful for troubleshooting some pack-related performance problems. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKET':: +`GIT_TRACE_PACKET`:: Enables trace messages for all packets coming in or out of a given program. This can help with debugging object negotiation or other protocol issues. Tracing is turned off at a packet - starting with "PACK" (but see 'GIT_TRACE_PACKFILE' below). - See 'GIT_TRACE' for available trace output options. + starting with "PACK" (but see `GIT_TRACE_PACKFILE` below). + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_PACKFILE':: +`GIT_TRACE_PACKFILE`:: Enables tracing of packfiles sent or received by a given program. Unlike other trace output, this trace is verbatim: no headers, and no quoting of binary data. You almost @@ -1042,22 +1109,30 @@ Unsetting the variable, or setting it to empty, "0" or Note that this is currently only implemented for the client side of clones and fetches. -'GIT_TRACE_PERFORMANCE':: +`GIT_TRACE_PERFORMANCE`:: Enables performance related trace messages, e.g. total execution time of each Git command. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SETUP':: +`GIT_TRACE_SETUP`:: Enables trace messages printing the .git, working tree and current working directory after Git has completed its setup phase. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. -'GIT_TRACE_SHALLOW':: +`GIT_TRACE_SHALLOW`:: Enables trace messages that can help debugging fetching / cloning of shallow repositories. - See 'GIT_TRACE' for available trace output options. + See `GIT_TRACE` for available trace output options. + +`GIT_TRACE_CURL`:: + Enables a curl full trace dump of all incoming and outgoing data, + including descriptive information, of the git transport protocol. + This is similar to doing curl `--trace-ascii` on the command line. + This option overrides setting the `GIT_CURL_VERBOSE` environment + variable. + See `GIT_TRACE` for available trace output options. -'GIT_LITERAL_PATHSPECS':: +`GIT_LITERAL_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs literally, rather than as glob patterns. For example, running `GIT_LITERAL_PATHSPECS=1 git log -- '*.c'` will search @@ -1066,19 +1141,19 @@ of clones and fetches. literal paths to Git (e.g., paths previously given to you by `git ls-tree`, `--raw` diff output, etc). -'GIT_GLOB_PATHSPECS':: +`GIT_GLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as glob patterns (aka "glob" magic). -'GIT_NOGLOB_PATHSPECS':: +`GIT_NOGLOB_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as literal (aka "literal" magic). -'GIT_ICASE_PATHSPECS':: +`GIT_ICASE_PATHSPECS`:: Setting this variable to `1` will cause Git to treat all pathspecs as case-insensitive. -'GIT_REFLOG_ACTION':: +`GIT_REFLOG_ACTION`:: When a ref is updated, reflog entries are created to keep track of the reason why the ref was updated (which is typically the name of the high-level command that updated @@ -1088,7 +1163,7 @@ of clones and fetches. variable when it is invoked as the top level command by the end user, to be recorded in the body of the reflog. -'GIT_REF_PARANOIA':: +`GIT_REF_PARANOIA`:: If set to `1`, include broken or badly named refs when iterating over lists of refs. In a normal, non-corrupted repository, this does nothing. However, enabling it may help git to detect and @@ -1099,33 +1174,21 @@ of clones and fetches. an operation has touched every ref (e.g., because you are cloning a repository to make a backup). -'GIT_ALLOW_PROTOCOL':: - If set, provide a colon-separated list of protocols which are - allowed to be used with fetch/push/clone. This is useful to - restrict recursive submodule initialization from an untrusted - repository. Any protocol not mentioned will be disallowed (i.e., - this is a whitelist, not a blacklist). If the variable is not - set at all, all protocols are enabled. The protocol names - currently used by git are: - - - `file`: any local file-based path (including `file://` URLs, - or local paths) - - - `git`: the anonymous git protocol over a direct TCP - connection (or proxy, if configured) - - - `ssh`: git over ssh (including `host:path` syntax, - `git+ssh://`, etc). - - - `rsync`: git over rsync - - - `http`: git over http, both "smart http" and "dumb http". - Note that this does _not_ include `https`; if you want both, - you should specify both as `http:https`. - - - any external helpers are named by their protocol (e.g., use - `hg` to allow the `git-remote-hg` helper) - +`GIT_ALLOW_PROTOCOL`:: + If set to a colon-separated list of protocols, behave as if + `protocol.allow` is set to `never`, and each of the listed + protocols has `protocol.<name>.allow` set to `always` + (overriding any existing configuration). In other words, any + protocol not mentioned will be disallowed (i.e., this is a + whitelist, not a blacklist). See the description of + `protocol.allow` in linkgit:git-config[1] for more details. + +`GIT_PROTOCOL_FROM_USER`:: + Set to 0 to prevent protocols used by fetch/push/clone which are + configured to the `user` state. This is useful to restrict recursive + submodule initialization from an untrusted repository or for programs + which feed potentially-untrusted URLS to git commands. See + linkgit:git-config[1] for more details. Discussion[[Discussion]] ------------------------ diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index e3b1de8..a53d093 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -21,9 +21,11 @@ Each line in `gitattributes` file is of form: pattern attr1 attr2 ... That is, a pattern followed by an attributes list, -separated by whitespaces. When the pattern matches the -path in question, the attributes listed on the line are given to -the path. +separated by whitespaces. Leading and trailing whitespaces are +ignored. Lines that begin with '#' are ignored. Patterns +that begin with a double quote are quoted in C style. +When the pattern matches the path in question, the attributes +listed on the line are given to the path. Each attribute can be in one of these states for a given path: @@ -86,7 +88,7 @@ is either not set or empty, $HOME/.config/git/attributes is used instead. Attributes for all users on a system should be placed in the `$(prefix)/etc/gitattributes` file. -Sometimes you would need to override an setting of an attribute +Sometimes you would need to override a setting of an attribute for a path to `Unspecified` state. This can be done by listing the name of the attribute prefixed with an exclamation point `!`. @@ -115,6 +117,7 @@ text file is normalized, its line endings are converted to LF in the repository. To control what line ending style is used in the working directory, use the `eol` attribute for a single file and the `core.eol` configuration variable for all text files. +Note that `core.autocrlf` overrides `core.eol` Set:: @@ -130,8 +133,9 @@ Unset:: Set to string value "auto":: When `text` is set to "auto", the path is marked for automatic - end-of-line normalization. If Git decides that the content is - text, its line endings are normalized to LF on checkin. + end-of-line conversion. If Git decides that the content is + text, its line endings are converted to LF on checkin. + When the file has been committed with CRLF, no conversion is done. Unspecified:: @@ -146,7 +150,7 @@ unspecified. ^^^^^ This attribute sets a specific line-ending style to be used in the -working directory. It enables end-of-line normalization without any +working directory. It enables end-of-line conversion without any content checks, effectively setting the `text` attribute. Set to string value "crlf":: @@ -180,60 +184,51 @@ While Git normally leaves file contents alone, it can be configured to normalize line endings to LF in the repository and, optionally, to convert them to CRLF when files are checked out. -Here is an example that will make Git normalize .txt, .vcproj and .sh -files, ensure that .vcproj files have CRLF and .sh files have LF in -the working directory, and prevent .jpg files from being normalized -regardless of their content. - ------------------------- -*.txt text -*.vcproj eol=crlf -*.sh eol=lf -*.jpg -text ------------------------- - -Other source code management systems normalize all text files in their -repositories, and there are two ways to enable similar automatic -normalization in Git. - If you simply want to have CRLF line endings in your working directory regardless of the repository you are working with, you can set the -config variable "core.autocrlf" without changing any attributes. +config variable "core.autocrlf" without using any attributes. ------------------------ [core] autocrlf = true ------------------------ -This does not force normalization of all text files, but does ensure +This does not force normalization of text files, but does ensure that text files that you introduce to the repository have their line endings normalized to LF when they are added, and that files that are already normalized in the repository stay normalized. -If you want to interoperate with a source code management system that -enforces end-of-line normalization, or you simply want all text files -in your repository to be normalized, you should instead set the `text` -attribute to "auto" for _all_ files. +If you want to ensure that text files that any contributor introduces to +the repository have their line endings normalized, you can set the +`text` attribute to "auto" for _all_ files. ------------------------ * text=auto ------------------------ -This ensures that all files that Git considers to be text will have -normalized (LF) line endings in the repository. The `core.eol` -configuration variable controls which line endings Git will use for -normalized files in your working directory; the default is to use the -native line ending for your platform, or CRLF if `core.autocrlf` is -set. +The attributes allow a fine-grained control, how the line endings +are converted. +Here is an example that will make Git normalize .txt, .vcproj and .sh +files, ensure that .vcproj files have CRLF and .sh files have LF in +the working directory, and prevent .jpg files from being normalized +regardless of their content. + +------------------------ +* text=auto +*.txt text +*.vcproj text eol=crlf +*.sh text eol=lf +*.jpg -text +------------------------ + +NOTE: When `text=auto` conversion is enabled in a cross-platform +project using push and pull to a central repository the text files +containing CRLFs should be normalized. -NOTE: When `text=auto` normalization is enabled in an existing -repository, any text files containing CRLFs should be normalized. If -they are not they will be normalized the next time someone tries to -change them, causing unfortunate misattribution. From a clean working -directory: +From a clean working directory: ------------------------------------------------- -$ echo "* text=auto" >>.gitattributes +$ echo "* text=auto" >.gitattributes $ rm .git/index # Remove the index to force Git to $ git reset # re-scan the working directory $ git status # Show files that will be normalized @@ -300,7 +295,15 @@ checkout, when the `smudge` command is specified, the command is fed the blob object from its standard input, and its standard output is used to update the worktree file. Similarly, the `clean` command is used to convert the contents of worktree file -upon checkin. +upon checkin. By default these commands process only a single +blob and terminate. If a long running `process` filter is used +in place of `clean` and/or `smudge` filters, then Git can process +all blobs with a single filter command invocation for the entire +life of a single Git command, for example `git add --all`. If a +long running `process` filter is configured then it always takes +precedence over a configured single blob filter. See section +below for the description of the protocol used to communicate with +a `process` filter. One use of the content filtering is to massage the content into a shape that is more convenient for the platform, filesystem, and the user to use. @@ -374,6 +377,160 @@ substitution. For example: smudge = git-p4-filter --smudge %f ------------------------ +Note that "%f" is the name of the path that is being worked on. Depending +on the version that is being filtered, the corresponding file on disk may +not exist, or may have different contents. So, smudge and clean commands +should not try to access the file on disk, but only act as filters on the +content provided to them on standard input. + +Long Running Filter Process +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +If the filter command (a string value) is defined via +`filter.<driver>.process` then Git can process all blobs with a +single filter invocation for the entire life of a single Git +command. This is achieved by using a packet format (pkt-line, +see technical/protocol-common.txt) based protocol over standard +input and standard output as follows. All packets, except for the +"*CONTENT" packets and the "0000" flush packet, are considered +text and therefore are terminated by a LF. + +Git starts the filter when it encounters the first file +that needs to be cleaned or smudged. After the filter started +Git sends a welcome message ("git-filter-client"), a list of supported +protocol version numbers, and a flush packet. Git expects to read a welcome +response message ("git-filter-server"), exactly one protocol version number +from the previously sent list, and a flush packet. All further +communication will be based on the selected version. The remaining +protocol description below documents "version=2". Please note that +"version=42" in the example below does not exist and is only there +to illustrate how the protocol would look like with more than one +version. + +After the version negotiation Git sends a list of all capabilities that +it supports and a flush packet. Git expects to read a list of desired +capabilities, which must be a subset of the supported capabilities list, +and a flush packet as response: +------------------------ +packet: git> git-filter-client +packet: git> version=2 +packet: git> version=42 +packet: git> 0000 +packet: git< git-filter-server +packet: git< version=2 +packet: git< 0000 +packet: git> capability=clean +packet: git> capability=smudge +packet: git> capability=not-yet-invented +packet: git> 0000 +packet: git< capability=clean +packet: git< capability=smudge +packet: git< 0000 +------------------------ +Supported filter capabilities in version 2 are "clean" and +"smudge". + +Afterwards Git sends a list of "key=value" pairs terminated with +a flush packet. The list will contain at least the filter command +(based on the supported capabilities) and the pathname of the file +to filter relative to the repository root. Right after the flush packet +Git sends the content split in zero or more pkt-line packets and a +flush packet to terminate content. Please note, that the filter +must not send any response before it received the content and the +final flush packet. Also note that the "value" of a "key=value" pair +can contain the "=" character whereas the key would never contain +that character. +------------------------ +packet: git> command=smudge +packet: git> pathname=path/testfile.dat +packet: git> 0000 +packet: git> CONTENT +packet: git> 0000 +------------------------ + +The filter is expected to respond with a list of "key=value" pairs +terminated with a flush packet. If the filter does not experience +problems then the list must contain a "success" status. Right after +these packets the filter is expected to send the content in zero +or more pkt-line packets and a flush packet at the end. Finally, a +second list of "key=value" pairs terminated with a flush packet +is expected. The filter can change the status in the second list +or keep the status as is with an empty list. Please note that the +empty list must be terminated with a flush packet regardless. + +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< SMUDGED_CONTENT +packet: git< 0000 +packet: git< 0000 # empty list, keep "status=success" unchanged! +------------------------ + +If the result content is empty then the filter is expected to respond +with a "success" status and a flush packet to signal the empty content. +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< 0000 # empty content! +packet: git< 0000 # empty list, keep "status=success" unchanged! +------------------------ + +In case the filter cannot or does not want to process the content, +it is expected to respond with an "error" status. +------------------------ +packet: git< status=error +packet: git< 0000 +------------------------ + +If the filter experiences an error during processing, then it can +send the status "error" after the content was (partially or +completely) sent. +------------------------ +packet: git< status=success +packet: git< 0000 +packet: git< HALF_WRITTEN_ERRONEOUS_CONTENT +packet: git< 0000 +packet: git< status=error +packet: git< 0000 +------------------------ + +In case the filter cannot or does not want to process the content +as well as any future content for the lifetime of the Git process, +then it is expected to respond with an "abort" status at any point +in the protocol. +------------------------ +packet: git< status=abort +packet: git< 0000 +------------------------ + +Git neither stops nor restarts the filter process in case the +"error"/"abort" status is set. However, Git sets its exit code +according to the `filter.<driver>.required` flag, mimicking the +behavior of the `filter.<driver>.clean` / `filter.<driver>.smudge` +mechanism. + +If the filter dies during the communication or does not adhere to +the protocol then Git will stop the filter process and restart it +with the next file that needs to be processed. Depending on the +`filter.<driver>.required` flag Git will interpret that as error. + +After the filter has processed a blob it is expected to wait for +the next "key=value" list containing a command. Git will close +the command pipe on exit. The filter is expected to detect EOF +and exit gracefully on its own. Git will wait until the filter +process has stopped. + +A long running filter demo implementation can be found in +`contrib/long-running-filter/example.pl` located in the Git +core repository. If you develop your own long running filter +process then the `GIT_TRACE_PACKET` environment variables can be +very helpful for debugging (see linkgit:git[1]). + +Please note that you cannot use an existing `filter.<driver>.clean` +or `filter.<driver>.smudge` command with `filter.<driver>.process` +because the former two use a different inter process communication +protocol than the latter one. + Interaction between checkin/checkout attributes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -525,6 +682,8 @@ patterns are available: - `csharp` suitable for source code in the C# language. +- `css` suitable for cascading style sheets. + - `fortran` suitable for source code in the Fortran language. - `fountain` suitable for Fountain documents. diff --git a/Documentation/gitcore-tutorial.txt b/Documentation/gitcore-tutorial.txt index 36e9ab3..3a0ec8c 100644 --- a/Documentation/gitcore-tutorial.txt +++ b/Documentation/gitcore-tutorial.txt @@ -25,7 +25,7 @@ you want to understand Git's internals. The core Git is often called "plumbing", with the prettier user interfaces on top of it called "porcelain". You may not want to use the plumbing directly very often, but it can be good to know what the -plumbing does for when the porcelain isn't flushing. +plumbing does when the porcelain isn't flushing. Back when this document was originally written, many porcelain commands were shell scripts. For simplicity, it still uses them as @@ -710,7 +710,7 @@ files). Again, this can all be simplified with ---------------- -$ git clone rsync://rsync.kernel.org/pub/scm/git/git.git/ my-git +$ git clone git://git.kernel.org/pub/scm/git/git.git/ my-git $ cd my-git $ git checkout ---------------- @@ -949,7 +949,7 @@ for details. [NOTE] If there were more commits on the 'master' branch after the merge, the merge commit itself would not be shown by 'git show-branch' by -default. You would need to provide '--sparse' option to make the +default. You would need to provide `--sparse` option to make the merge commit visible in this case. Now, let's pretend you are the one who did all the work in @@ -1011,20 +1011,6 @@ $ git fetch <remote-repository> One of the following transports can be used to name the repository to download from: -Rsync:: - `rsync://remote.machine/path/to/repo.git/` -+ -Rsync transport is usable for both uploading and downloading, -but is completely unaware of what git does, and can produce -unexpected results when you download from the public repository -while the repository owner is uploading into it via `rsync` -transport. Most notably, it could update the files under -`refs/` which holds the object name of the topmost commits -before uploading the files in `objects/` -- the downloader would -obtain head commit object name while that object itself is still -not available in the repository. For this reason, it is -considered deprecated. - SSH:: `remote.machine:/path/to/repo.git/` or + @@ -1382,7 +1368,7 @@ $ git repack will do it for you. If you followed the tutorial examples, you would have accumulated about 17 objects in `.git/objects/??/` directories by now. 'git repack' tells you how many objects it -packed, and stores the packed file in `.git/objects/pack` +packed, and stores the packed file in the `.git/objects/pack` directory. [NOTE] @@ -1430,7 +1416,7 @@ while, depending on how active your project is. When a repository is synchronized via `git push` and `git pull` objects packed in the source repository are usually stored -unpacked in the destination, unless rsync transport is used. +unpacked in the destination. While this allows you to use different packing strategies on both ends, it also means you may need to repack both repositories every once in a while. @@ -1492,7 +1478,7 @@ You can repack this private repository whenever you feel like. A recommended work cycle for a "subsystem maintainer" who works on that project and has an own "public repository" goes like this: -1. Prepare your work repository, by 'git clone' the public +1. Prepare your work repository, by running 'git clone' on the public repository of the "project lead". The URL used for the initial cloning is stored in the remote.origin.url configuration variable. @@ -1557,9 +1543,9 @@ like this: Working with Others, Shared Repository Style -------------------------------------------- -If you are coming from CVS background, the style of cooperation +If you are coming from a CVS background, the style of cooperation suggested in the previous section may be new to you. You do not -have to worry. Git supports "shared public repository" style of +have to worry. Git supports the "shared public repository" style of cooperation you are probably more familiar with as well. See linkgit:gitcvs-migration[7] for the details. @@ -1649,7 +1635,7 @@ $ git show-branch ++* [master~2] Pretty-print messages. ------------ -Note that you should not do Octopus because you can. An octopus +Note that you should not do Octopus just because you can. An octopus is a valid thing to do and often makes it easier to view the commit history if you are merging more than two independent changes at the same time. However, if you have merge conflicts @@ -1672,4 +1658,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitcredentials.txt b/Documentation/gitcredentials.txt index 1c75be0..f3a75d1 100644 --- a/Documentation/gitcredentials.txt +++ b/Documentation/gitcredentials.txt @@ -106,6 +106,11 @@ variable, each helper will be tried in turn, and may provide a username, password, or nothing. Once Git has acquired both a username and a password, no more helpers will be tried. +If `credential.helper` is configured to the empty string, this resets +the helper list to empty (so you may override a helper set by a +lower-priority config file by configuring the empty-string helper, +followed by whatever set of helpers you would like). + CREDENTIAL CONTEXTS ------------------- diff --git a/Documentation/gitcvs-migration.txt b/Documentation/gitcvs-migration.txt index b06e852..1cd1283 100644 --- a/Documentation/gitcvs-migration.txt +++ b/Documentation/gitcvs-migration.txt @@ -116,8 +116,12 @@ they create are writable and searchable by other group members. Importing a CVS archive ----------------------- +NOTE: These instructions use the `git-cvsimport` script which ships with +git, but other importers may provide better results. See the note in +linkgit:git-cvsimport[1] for other options. + First, install version 2.1 or higher of cvsps from -http://www.cobite.com/cvsps/[http://www.cobite.com/cvsps/] and make +https://github.com/andreyvit/cvsps[https://github.com/andreyvit/cvsps] and make sure it is in your path. Then cd to a checked out CVS working directory of the project you are interested in and run linkgit:git-cvsimport[1]: @@ -199,4 +203,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitdiffcore.txt b/Documentation/gitdiffcore.txt index c579593..c0a60f3 100644 --- a/Documentation/gitdiffcore.txt +++ b/Documentation/gitdiffcore.txt @@ -28,8 +28,8 @@ The 'git diff-{asterisk}' family works by first comparing two sets of files: - 'git diff-index' compares contents of a "tree" object and the - working directory (when '--cached' flag is not used) or a - "tree" object and the index file (when '--cached' flag is + working directory (when `--cached` flag is not used) or a + "tree" object and the index file (when `--cached` flag is used); - 'git diff-files' compares contents of the index file and the @@ -84,8 +84,8 @@ format sections of the manual for 'git diff-{asterisk}' commands) or diff-patch format. -diffcore-break: For Splitting Up "Complete Rewrites" ----------------------------------------------------- +diffcore-break: For Splitting Up Complete Rewrites +-------------------------------------------------- The second transformation in the chain is diffcore-break, and is controlled by the -B option to the 'git diff-{asterisk}' commands. This is @@ -119,7 +119,7 @@ the original is used), and can be customized by giving a number after "-B" option (e.g. "-B75" to tell it to use 75%). -diffcore-rename: For Detection Renames and Copies +diffcore-rename: For Detecting Renames and Copies ------------------------------------------------- This transformation is used to detect renames and copies, and is @@ -177,8 +177,8 @@ the expense of making it slower. Without `--find-copies-harder`, copied happened to have been modified in the same changeset. -diffcore-merge-broken: For Putting "Complete Rewrites" Back Together --------------------------------------------------------------------- +diffcore-merge-broken: For Putting Complete Rewrites Back Together +------------------------------------------------------------------ This transformation is used to merge filepairs broken by diffcore-break, and not transformed into rename/copy by @@ -288,4 +288,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/giteveryday.txt b/Documentation/giteveryday.txt index 35473ad..10c8ff9 100644 --- a/Documentation/giteveryday.txt +++ b/Documentation/giteveryday.txt @@ -307,9 +307,16 @@ master or exposed as a part of a stable branch. <9> backport a critical fix. <10> create a signed tag. <11> make sure master was not accidentally rewound beyond that -already pushed out. `ko` shorthand points at the Git maintainer's +already pushed out. +<12> In the output from `git show-branch`, `master` should have +everything `ko/master` has, and `next` should have +everything `ko/next` has, etc. +<13> push out the bleeding edge, together with new tags that point +into the pushed history. + +In this example, the `ko` shorthand points at the Git maintainer's repository at kernel.org, and looks like this: -+ + ------------ (in .git/config) [remote "ko"] @@ -320,12 +327,6 @@ repository at kernel.org, and looks like this: push = +refs/heads/pu push = refs/heads/maint ------------ -+ -<12> In the output from `git show-branch`, `master` should have -everything `ko/master` has, and `next` should have -everything `ko/next` has, etc. -<13> push out the bleeding edge, together with new tags that point -into the pushed history. Repository Administration[[ADMINISTRATION]] diff --git a/Documentation/gitglossary.txt b/Documentation/gitglossary.txt index 212e254..571f640 100644 --- a/Documentation/gitglossary.txt +++ b/Documentation/gitglossary.txt @@ -24,4 +24,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt index 7ba0ac9..9565dc3 100644 --- a/Documentation/githooks.txt +++ b/Documentation/githooks.txt @@ -7,24 +7,35 @@ githooks - Hooks used by Git SYNOPSIS -------- -$GIT_DIR/hooks/* +$GIT_DIR/hooks/* (or \`git config core.hooksPath`/*) DESCRIPTION ----------- -Hooks are little scripts you can place in `$GIT_DIR/hooks` -directory to trigger action at certain points. When -'git init' is run, a handful of example hooks are copied into the -`hooks` directory of the new repository, but by default they are -all disabled. To enable a hook, rename it by removing its `.sample` -suffix. +Hooks are programs you can place in a hooks directory to trigger +actions at certain points in git's execution. Hooks that don't have +the executable bit set are ignored. -NOTE: It is also a requirement for a given hook to be executable. -However - in a freshly initialized repository - the `.sample` files are -executable by default. +By default the hooks directory is `$GIT_DIR/hooks`, but that can be +changed via the `core.hooksPath` configuration variable (see +linkgit:git-config[1]). -This document describes the currently defined hooks. +Before Git invokes a hook, it changes its working directory to either +the root of the working tree in a non-bare repository, or to the +$GIT_DIR in a bare repository. + +Hooks can get their arguments via the environment, command-line +arguments, and stdin. See the documentation for each hook below for +details. + +'git init' may copy hooks to the new repository, depending on its +configuration. See the "TEMPLATE DIRECTORY" section in +linkgit:git-init[1] for details. When the rest of this document refers +to "default hooks" it's talking about the default template shipped +with Git. + +The currently supported hooks are described below. HOOKS ----- @@ -32,15 +43,15 @@ HOOKS applypatch-msg ~~~~~~~~~~~~~~ -This hook is invoked by 'git am' script. It takes a single +This hook is invoked by 'git am'. It takes a single parameter, the name of the file that holds the proposed commit -log message. Exiting with non-zero status causes -'git am' to abort before applying the patch. +log message. Exiting with a non-zero status causes 'git am' to abort +before applying the patch. The hook is allowed to edit the message file in place, and can be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +format. It can also be used to refuse the commit after inspecting +the message file. The default 'applypatch-msg' hook, when enabled, runs the 'commit-msg' hook, if the latter is enabled. @@ -73,10 +84,10 @@ pre-commit ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes no parameter, and is +with the `--no-verify` option. It takes no parameters, and is invoked before obtaining the proposed commit log message and -making a commit. Exiting with non-zero status from this script -causes the 'git commit' to abort. +making a commit. Exiting with a non-zero status from this script +causes the 'git commit' command to abort before creating a commit. The default 'pre-commit' hook, when enabled, catches introduction of lines with trailing whitespaces and aborts the commit when @@ -115,15 +126,15 @@ commit-msg ~~~~~~~~~~ This hook is invoked by 'git commit', and can be bypassed -with `--no-verify` option. It takes a single parameter, the +with the `--no-verify` option. It takes a single parameter, the name of the file that holds the proposed commit log message. -Exiting with non-zero status causes the 'git commit' to +Exiting with a non-zero status causes the 'git commit' to abort. -The hook is allowed to edit the message file in place, and can -be used to normalize the message into some project standard -format (if the project has one). It can also be used to refuse -the commit after inspecting the message file. +The hook is allowed to edit the message file in place, and can be used +to normalize the message into some project standard format. It +can also be used to refuse the commit after inspecting the message +file. The default 'commit-msg' hook, when enabled, detects duplicate "Signed-off-by" lines, and aborts the commit if one is found. @@ -131,8 +142,8 @@ The default 'commit-msg' hook, when enabled, detects duplicate post-commit ~~~~~~~~~~~ -This hook is invoked by 'git commit'. It takes no -parameter, and is invoked after a commit is made. +This hook is invoked by 'git commit'. It takes no parameters, and is +invoked after a commit is made. This hook is meant primarily for notification, and cannot affect the outcome of 'git commit'. @@ -236,6 +247,15 @@ Both standard output and standard error output are forwarded to 'git send-pack' on the other end, so you can simply `echo` messages for the user. +The number of push options given on the command line of +`git push --push-option=...` can be read from the environment +variable `GIT_PUSH_OPTION_COUNT`, and the options themselves are +found in `GIT_PUSH_OPTION_0`, `GIT_PUSH_OPTION_1`,... +If it is negotiated to not use the push options phase, the +environment variables will not be set. If the client selects +to use push options, but doesn't transmit any, the count variable +will be set to zero, `GIT_PUSH_OPTION_COUNT=0`. + [[update]] update ~~~~~~ @@ -267,9 +287,11 @@ does not know the entire set of branches, so it would end up firing one e-mail per ref when used naively, though. The <<post-receive,'post-receive'>> hook is more suited to that. -Another use suggested on the mailing list is to use this hook to -implement access control which is finer grained than the one -based on filesystem group. +In an environment that restricts the users' access only to git +commands over the wire, this hook can be used to implement access +control without relying on filesystem ownership and group +membership. See linkgit:git-shell[1] for how you might use the login +shell to restrict the user's access to only git commands. Both standard output and standard error output are forwarded to 'git send-pack' on the other end, so you can simply `echo` messages @@ -309,6 +331,15 @@ a sample script `post-receive-email` provided in the `contrib/hooks` directory in Git distribution, which implements sending commit emails. +The number of push options given on the command line of +`git push --push-option=...` can be read from the environment +variable `GIT_PUSH_OPTION_COUNT`, and the options themselves are +found in `GIT_PUSH_OPTION_0`, `GIT_PUSH_OPTION_1`,... +If it is negotiated to not use the push options phase, the +environment variables will not be set. If the client selects +to use push options, but doesn't transmit any, the count variable +will be set to zero, `GIT_PUSH_OPTION_COUNT=0`. + [[post-update]] post-update ~~~~~~~~~~~ @@ -397,7 +428,7 @@ preceding SP is also omitted. Currently, no commands pass any 'extra-info'. The hook always runs after the automatic note copying (see -"notes.rewrite.<command>" in linkgit:git-config.txt[1]) has happened, and +"notes.rewrite.<command>" in linkgit:git-config[1]) has happened, and thus has access to these notes. The following command-specific comments apply: diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 79a1948..63260f0 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -38,7 +38,7 @@ precedence, the last matching pattern decides the outcome): * Patterns read from `$GIT_DIR/info/exclude`. * Patterns read from the file specified by the configuration - variable 'core.excludesFile'. + variable `core.excludesFile`. Which file to place a pattern in depends on how the pattern is meant to be used. @@ -82,12 +82,12 @@ PATTERN FORMAT - An optional prefix "`!`" which negates the pattern; any matching file excluded by a previous pattern will become - included again. + included again. It is not possible to re-include a file if a parent + directory of that file is excluded. Git doesn't list excluded + directories for performance reasons, so any patterns on contained + files have no effect, no matter where they are defined. Put a backslash ("`\`") in front of the first "`!`" for patterns that begin with a literal "`!`", for example, "`\!important!.txt`". - It is possible to re-include a file if a parent directory of that - file is excluded if certain conditions are met. See section NOTES - for detail. - If the pattern ends with a slash, it is removed for the purpose of the following description, but it would only find @@ -141,21 +141,6 @@ not tracked by Git remain untracked. To stop tracking a file that is currently tracked, use 'git rm --cached'. -To re-include files or directories when their parent directory is -excluded, the following conditions must be met: - - - The rules to exclude a directory and re-include a subset back must - be in the same .gitignore file. - - - The directory part in the re-include rules must be literal (i.e. no - wildcards) - - - The rules to exclude the parent directory must not end with a - trailing slash. - - - The rules to exclude the parent directory must have at least one - slash. - EXAMPLES -------- diff --git a/Documentation/gitk.txt b/Documentation/gitk.txt index 6ade002..ca96c28 100644 --- a/Documentation/gitk.txt +++ b/Documentation/gitk.txt @@ -70,7 +70,7 @@ linkgit:git-rev-list[1] for a complete list. --left-right:: - Mark which side of a symmetric diff a commit is reachable + Mark which side of a symmetric difference a commit is reachable from. Commits from the left side are prefixed with a `<` symbol and those from the right with a `>` symbol. @@ -82,7 +82,7 @@ linkgit:git-rev-list[1] for a complete list. --simplify-merges:: - Additional option to '--full-history' to remove some needless + Additional option to `--full-history` to remove some needless merges from the resulting history, as there are no selected commits contributing to this merge. (See "History simplification" in linkgit:git-log[1] for a more detailed @@ -178,19 +178,21 @@ used by default. If '$XDG_CONFIG_HOME' is not set it defaults to History ------- Gitk was the first graphical repository browser. It's written in -tcl/tk and started off in a separate repository but was later merged -into the main Git repository. +tcl/tk. +'gitk' is actually maintained as an independent project, but stable +versions are distributed as part of the Git suite for the convenience +of end users. + +gitk-git/ comes from Paul Mackerras's gitk project: + + git://ozlabs.org/~paulus/gitk SEE ALSO -------- 'qgit(1)':: A repository browser written in C++ using Qt. -'gitview(1)':: - A repository browser written in Python using Gtk. It's based on - 'bzrk(1)' and distributed in the contrib area of the Git repository. - 'tig(1)':: A minimal repository browser and Git tool output highlighter written in C using Ncurses. diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt index ac70eca..8f7c50f 100644 --- a/Documentation/gitmodules.txt +++ b/Documentation/gitmodules.txt @@ -19,7 +19,7 @@ of linkgit:git-config[1]. The file contains one subsection per submodule, and the subsection value is the name of the submodule. The name is set to the path where the -submodule has been added unless it was customized with the '--name' +submodule has been added unless it was customized with the `--name` option of 'git submodule add'. Each submodule section also contains the following required keys: @@ -50,8 +50,11 @@ submodule.<name>.update:: submodule.<name>.branch:: A remote branch name for tracking updates in the upstream submodule. - If the option is not specified, it defaults to 'master'. See the - `--remote` documentation in linkgit:git-submodule[1] for details. + If the option is not specified, it defaults to 'master'. A special + value of `.` is used to indicate that the name of the branch in the + submodule should be the same name as the current branch in the + current repository. See the `--remote` documentation in + linkgit:git-submodule[1] for details. submodule.<name>.fetchRecurseSubmodules:: This option can be used to control recursive fetching of this @@ -79,6 +82,11 @@ submodule.<name>.ignore:: "--ignore-submodule" option. The 'git submodule' commands are not affected by this setting. +submodule.<name>.shallow:: + When set to true, a clone of this submodule will be performed as a + shallow clone unless the user explicitly asks for a non-shallow + clone. + EXAMPLES -------- diff --git a/Documentation/gitnamespaces.txt b/Documentation/gitnamespaces.txt index 7685e36..b614969 100644 --- a/Documentation/gitnamespaces.txt +++ b/Documentation/gitnamespaces.txt @@ -61,22 +61,4 @@ For a simple local test, you can use linkgit:git-remote-ext[1]: git clone ext::'git --namespace=foo %s /tmp/prefixed.git' ---------- -SECURITY --------- - -Anyone with access to any namespace within a repository can potentially -access objects from any other namespace stored in the same repository. -You can't directly say "give me object ABCD" if you don't have a ref to -it, but you can do some other sneaky things like: - -. Claiming to push ABCD, at which point the server will optimize out the - need for you to actually send it. Now you have a ref to ABCD and can - fetch it (claiming not to have it, of course). - -. Requesting other refs, claiming that you have ABCD, at which point the - server may generate deltas against ABCD. - -None of this causes a problem if you only host public repositories, or -if everyone who may read one namespace may also read everything in every -other namespace (for instance, if everyone in an organization has read -permission to every repository). +include::transfer-data-leaks.txt[] diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt index 78e0b27..e4b785e 100644 --- a/Documentation/gitremote-helpers.txt +++ b/Documentation/gitremote-helpers.txt @@ -43,7 +43,7 @@ arguments. The first argument specifies a remote repository as in Git; it is either the name of a configured remote or a URL. The second argument specifies a URL; it is usually of the form '<transport>://<address>', but any arbitrary string is possible. -The 'GIT_DIR' environment variable is set up for the remote helper +The `GIT_DIR` environment variable is set up for the remote helper and can be used to determine where to store additional data or from which directory to invoke auxiliary Git commands. @@ -61,10 +61,10 @@ argument. If such a URL is encountered directly on the command line, the first argument is '<address>', and if it is encountered in a configured remote, the first argument is the name of that remote. -Additionally, when a configured remote has 'remote.<name>.vcs' set to +Additionally, when a configured remote has `remote.<name>.vcs` set to '<transport>', Git explicitly invokes 'git remote-<transport>' with '<name>' as the first argument. If set, the second argument is -'remote.<name>.url'; otherwise, the second argument is omitted. +`remote.<name>.url`; otherwise, the second argument is omitted. INPUT FORMAT ------------ @@ -210,17 +210,17 @@ the remote repository. 'export-marks' <file>:: This modifies the 'export' capability, instructing Git to dump the internal marks table to <file> when complete. For details, - read up on '--export-marks=<file>' in linkgit:git-fast-export[1]. + read up on `--export-marks=<file>` in linkgit:git-fast-export[1]. 'import-marks' <file>:: This modifies the 'export' capability, instructing Git to load the marks specified in <file> before processing any input. For details, - read up on '--import-marks=<file>' in linkgit:git-fast-export[1]. + read up on `--import-marks=<file>` in linkgit:git-fast-export[1]. 'signed-tags':: This modifies the 'export' capability, instructing Git to pass - '--signed-tags=verbatim' to linkgit:git-fast-export[1]. In the - absence of this capability, Git will use '--signed-tags=warn-strip'. + `--signed-tags=verbatim` to linkgit:git-fast-export[1]. In the + absence of this capability, Git will use `--signed-tags=warn-strip`. @@ -298,7 +298,7 @@ Supported if the helper has the "fetch" capability. is followed by a blank line). For example, the following would be two batches of 'push', the first asking the remote-helper to push the local ref 'master' to the remote ref 'master' and - the local 'HEAD' to the remote 'branch', and the second + the local `HEAD` to the remote 'branch', and the second asking to push ref 'foo' to ref 'bar' (forced update requested by the '+'). + @@ -415,6 +415,17 @@ set by Git if the remote helper has the 'option' capability. 'option depth' <depth>:: Deepens the history of a shallow repository. +'option deepen-since <timestamp>:: + Deepens the history of a shallow repository based on time. + +'option deepen-not <ref>:: + Deepens the history of a shallow repository excluding ref. + Multiple options add up. + +'option deepen-relative {'true'|'false'}:: + Deepens the history of a shallow repository relative to + current boundary. Only valid when used with "option depth". + 'option followtags' {'true'|'false'}:: If enabled the helper should automatically fetch annotated tag objects if the object the tag points at was transferred @@ -441,16 +452,20 @@ set by Git if the remote helper has the 'option' capability. Request the helper to perform a force update. Defaults to 'false'. -'option cloning {'true'|'false'}:: +'option cloning' {'true'|'false'}:: Notify the helper this is a clone request (i.e. the current repository is guaranteed empty). -'option update-shallow {'true'|'false'}:: +'option update-shallow' {'true'|'false'}:: Allow to extend .git/shallow if the new refs require it. -'option pushcert {'true'|'false'}:: +'option pushcert' {'true'|'false'}:: GPG sign pushes. +'option push-option <string>:: + Transmit <string> as a push option. As the a push option + must not contain LF or NUL characters, the string is not encoded. + SEE ALSO -------- linkgit:git-remote[1] diff --git a/Documentation/gitrepository-layout.txt b/Documentation/gitrepository-layout.txt index 577ee84..f51ed4e 100644 --- a/Documentation/gitrepository-layout.txt +++ b/Documentation/gitrepository-layout.txt @@ -177,7 +177,7 @@ sharedindex.<SHA-1>:: info:: Additional information about the repository is recorded in this directory. This directory is ignored if $GIT_COMMON_DIR - is set and "$GIT_COMMON_DIR/index" will be used instead. + is set and "$GIT_COMMON_DIR/info" will be used instead. info/refs:: This file helps dumb transports discover what refs are @@ -289,4 +289,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitrevisions.txt b/Documentation/gitrevisions.txt index e903eb7..27dec5b 100644 --- a/Documentation/gitrevisions.txt +++ b/Documentation/gitrevisions.txt @@ -15,9 +15,9 @@ DESCRIPTION Many Git commands take revision parameters as arguments. Depending on the command, they denote a specific commit or, for commands which -walk the revision graph (such as linkgit:git-log[1]), all commits which can -be reached from that commit. In the latter case one can also specify a -range of revisions explicitly. +walk the revision graph (such as linkgit:git-log[1]), all commits which are +reachable from that commit. For commands that walk the revision graph one can +also specify a range of revisions explicitly. In addition, some Git commands (such as linkgit:git-show[1]) also take revision parameters which denote other objects than commits, e.g. blobs diff --git a/Documentation/gittutorial-2.txt b/Documentation/gittutorial-2.txt index 30d2119..e0976f6 100644 --- a/Documentation/gittutorial-2.txt +++ b/Documentation/gittutorial-2.txt @@ -433,4 +433,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gittutorial.txt b/Documentation/gittutorial.txt index b00c67d..794b833 100644 --- a/Documentation/gittutorial.txt +++ b/Documentation/gittutorial.txt @@ -451,7 +451,7 @@ perform clones and pulls using the ssh protocol: bob$ git clone alice.org:/home/alice/project myrepo ------------------------------------- -Alternatively, Git has a native protocol, or can use rsync or http; +Alternatively, Git has a native protocol, or can use http; see linkgit:git-pull[1] for details. Git can also be used in a CVS-like mode, with a central repository @@ -674,4 +674,4 @@ link:user-manual.html[The Git User's Manual] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/gitweb.conf.txt b/Documentation/gitweb.conf.txt index 8a42270..e632089 100644 --- a/Documentation/gitweb.conf.txt +++ b/Documentation/gitweb.conf.txt @@ -246,13 +246,20 @@ $highlight_bin:: Note that 'highlight' feature must be set for gitweb to actually use syntax highlighting. + -*NOTE*: if you want to add support for new file type (supported by -"highlight" but not used by gitweb), you need to modify `%highlight_ext` -or `%highlight_basename`, depending on whether you detect type of file -based on extension (for example "sh") or on its basename (for example -"Makefile"). The keys of these hashes are extension and basename, -respectively, and value for given key is name of syntax to be passed via -`--syntax <syntax>` to highlighter. +*NOTE*: for a file to be highlighted, its syntax type must be detected +and that syntax must be supported by "highlight". The default syntax +detection is minimal, and there are many supported syntax types with no +detection by default. There are three options for adding syntax +detection. The first and second priority are `%highlight_basename` and +`%highlight_ext`, which detect based on basename (the full filename, for +example "Makefile") and extension (for example "sh"). The keys of these +hashes are the basename and extension, respectively, and the value for a +given key is the name of the syntax to be passed via `--syntax <syntax>` +to "highlight". The last priority is the "highlight" configuration of +`Shebang` regular expressions to detect the language based on the first +line in the file, (for example, matching the line "#!/bin/bash"). See +the highlight documentation and the default config at +/etc/highlight/filetypes.conf for more details. + For example if repositories you are hosting use "phtml" extension for PHP files, and you want to have correct syntax-highlighting for those @@ -376,7 +383,7 @@ $site_name:: Name of your site or organization, to appear in page titles. Set it to something descriptive for clearer bookmarks etc. If this variable is not set or is, then gitweb uses the value of the `SERVER_NAME` - CGI environment variable, setting site name to "$SERVER_NAME Git", + `CGI` environment variable, setting site name to "$SERVER_NAME Git", or "Untitled Git" if this variable is not set (e.g. if running gitweb as standalone script). + diff --git a/Documentation/gitweb.txt b/Documentation/gitweb.txt index cd9c895..96156e5 100644 --- a/Documentation/gitweb.txt +++ b/Documentation/gitweb.txt @@ -206,8 +206,8 @@ $export_auth_hook = sub { Per-repository gitweb configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can configure individual repositories shown in gitweb by creating file -in the 'GIT_DIR' of Git repository, or by setting some repo configuration -variable (in 'GIT_DIR/config', see linkgit:git-config[1]). +in the `GIT_DIR` of Git repository, or by setting some repo configuration +variable (in `GIT_DIR/config`, see linkgit:git-config[1]). You can use the following files in repository: diff --git a/Documentation/gitworkflows.txt b/Documentation/gitworkflows.txt index f16c414..177610e 100644 --- a/Documentation/gitworkflows.txt +++ b/Documentation/gitworkflows.txt @@ -477,4 +477,4 @@ linkgit:git-am[1] GIT --- -Part of the linkgit:git[1] suite. +Part of the linkgit:git[1] suite diff --git a/Documentation/glossary-content.txt b/Documentation/glossary-content.txt index e225974..6e991c2 100644 --- a/Documentation/glossary-content.txt +++ b/Documentation/glossary-content.txt @@ -145,7 +145,7 @@ current branch integrates with) obviously do not work, as there is no A fast-forward is a special type of <<def_merge,merge>> where you have a <<def_revision,revision>> and you are "merging" another <<def_branch,branch>>'s changes that happen to be a descendant of what - you have. In such these cases, you do not make a new <<def_merge,merge>> + you have. In such a case, you do not make a new <<def_merge,merge>> <<def_commit,commit>> but instead just update to his revision. This will happen frequently on a <<def_remote_tracking_branch,remote-tracking branch>> of a remote @@ -384,10 +384,33 @@ full pathname may have special meaning: + Glob magic is incompatible with literal magic. +attr;; +After `attr:` comes a space separated list of "attribute +requirements", all of which must be met in order for the +path to be considered a match; this is in addition to the +usual non-magic pathspec pattern matching. +See linkgit:gitattributes[5]. ++ +Each of the attribute requirements for the path takes one of +these forms: + +- "`ATTR`" requires that the attribute `ATTR` be set. + +- "`-ATTR`" requires that the attribute `ATTR` be unset. + +- "`ATTR=VALUE`" requires that the attribute `ATTR` be + set to the string `VALUE`. + +- "`!ATTR`" requires that the attribute `ATTR` be + unspecified. ++ + exclude;; After a path matches any non-exclude pathspec, it will be run - through all exclude pathspec (magic signature: `!`). If it - matches, the path is ignored. + through all exclude pathspec (magic signature: `!` or its + synonym `^`). If it matches, the path is ignored. When there + is no non-exclude pathspec, the exclusion is applied to the + result set as if invoked without any pathspec. -- [[def_parent]]parent:: @@ -531,6 +554,11 @@ The most notable example is `HEAD`. "Secure Hash Algorithm 1"; a cryptographic hash function. In the context of Git used as a synonym for <<def_object_name,object name>>. +[[def_shallow_clone]]shallow clone:: + Mostly a synonym to <<def_shallow_repository,shallow repository>> + but the phrase makes it more explicit that it was created by + running `git clone --depth=...` command. + [[def_shallow_repository]]shallow repository:: A shallow <<def_repository,repository>> has an incomplete history some of whose <<def_commit,commits>> have <<def_parent,parents>> cauterized away (in other diff --git a/Documentation/howto/new-command.txt b/Documentation/howto/new-command.txt index 6d772bd..15a4c80 100644 --- a/Documentation/howto/new-command.txt +++ b/Documentation/howto/new-command.txt @@ -94,7 +94,7 @@ your language, document it in the INSTALL file. 6. There is a file command-list.txt in the distribution main directory that categorizes commands by type, so they can be listed in appropriate subsections in the documentation's summary command list. Add an entry -for yours. To understand the categories, look at git-commands.txt +for yours. To understand the categories, look at command-list.txt in the main directory. If the new command is part of the typical Git workflow and you believe it common enough to be mentioned in 'git help', map this command to a common group in the column [common]. diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt index 462255e..19f59cc 100644 --- a/Documentation/howto/revert-a-faulty-merge.txt +++ b/Documentation/howto/revert-a-faulty-merge.txt @@ -30,7 +30,7 @@ The history immediately after the "revert of the merge" would look like this: ---o---o---o---M---x---x---W - / + / ---A---B where A and B are on the side development that was not so good, M is the @@ -47,7 +47,7 @@ After the developers of the side branch fix their mistakes, the history may look like this: ---o---o---o---M---x---x---W---x - / + / ---A---B-------------------C---D where C and D are to fix what was broken in A and B, and you may already @@ -81,7 +81,7 @@ In such a situation, you would want to first revert the previous revert, which would make the history look like this: ---o---o---o---M---x---x---W---x---Y - / + / ---A---B-------------------C---D where Y is the revert of W. Such a "revert of the revert" can be done @@ -93,14 +93,14 @@ This history would (ignoring possible conflicts between what W and W..Y changed) be equivalent to not having W or Y at all in the history: ---o---o---o---M---x---x-------x---- - / + / ---A---B-------------------C---D and merging the side branch again will not have conflict arising from an earlier revert and revert of the revert. ---o---o---o---M---x---x-------x-------* - / / + / / ---A---B-------------------C---D Of course the changes made in C and D still can conflict with what was @@ -111,13 +111,13 @@ faulty A and B, and redone the changes on top of the updated mainline after the revert, the history would have looked like this: ---o---o---o---M---x---x---W---x---x - / \ + / \ ---A---B A'--B'--C' If you reverted the revert in such a case as in the previous example: ---o---o---o---M---x---x---W---x---x---Y---* - / \ / + / \ / ---A---B A'--B'--C' where Y is the revert of W, A' and B' are rerolled A and B, and there may @@ -129,7 +129,7 @@ lot of overlapping changes that result in conflicts. So do not do "revert of revert" blindly without thinking.. ---o---o---o---M---x---x---W---x---x - / \ + / \ ---A---B A'--B'--C' In the history with rebased side branch, W (and M) are behind the merge diff --git a/Documentation/lint-gitlink.perl b/Documentation/lint-gitlink.perl new file mode 100755 index 0000000..476cc30 --- /dev/null +++ b/Documentation/lint-gitlink.perl @@ -0,0 +1,71 @@ +#!/usr/bin/perl + +use File::Find; +use Getopt::Long; + +my $basedir = "."; +GetOptions("basedir=s" => \$basedir) + or die("Cannot parse command line arguments\n"); + +my $found_errors = 0; + +sub report { + my ($where, $what, $error) = @_; + print "$where: $error: $what\n"; + $found_errors = 1; +} + +sub grab_section { + my ($page) = @_; + open my $fh, "<", "$basedir/$page.txt"; + my $firstline = <$fh>; + chomp $firstline; + close $fh; + my ($section) = ($firstline =~ /.*\((\d)\)$/); + return $section; +} + +sub lint { + my ($file) = @_; + open my $fh, "<", $file + or return; + while (<$fh>) { + my $where = "$file:$."; + while (s/linkgit:((.*?)\[(\d)\])//) { + my ($target, $page, $section) = ($1, $2, $3); + + # De-AsciiDoc + $page =~ s/{litdd}/--/g; + + if ($page !~ /^git/) { + report($where, $target, "nongit link"); + next; + } + if (! -f "$basedir/$page.txt") { + report($where, $target, "no such source"); + next; + } + $real_section = grab_section($page); + if ($real_section != $section) { + report($where, $target, + "wrong section (should be $real_section)"); + next; + } + } + } + close $fh; +} + +sub lint_it { + lint($File::Find::name) if -f && /\.txt$/; +} + +if (!@ARGV) { + find({ wanted => \&lint_it, no_chdir => 1 }, $basedir); +} else { + for (@ARGV) { + lint($_); + } +} + +exit $found_errors; diff --git a/Documentation/merge-config.txt b/Documentation/merge-config.txt index 002ca58..df3ea37 100644 --- a/Documentation/merge-config.txt +++ b/Documentation/merge-config.txt @@ -61,7 +61,7 @@ merge.verbosity:: message if conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts and file changes. Level 5 and above outputs debugging information. The default is level 2. - Can be overridden by the 'GIT_MERGE_VERBOSITY' environment variable. + Can be overridden by the `GIT_MERGE_VERBOSITY` environment variable. merge.<driver>.name:: Defines a human-readable name for a custom low-level diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt index f08e9b8..5b4a62e 100644 --- a/Documentation/merge-options.txt +++ b/Documentation/merge-options.txt @@ -89,8 +89,11 @@ option can be used to override --squash. --verify-signatures:: --no-verify-signatures:: - Verify that the commits being merged have good and trusted GPG signatures - and abort the merge in case they do not. + Verify that the tip commit of the side branch being merged is + signed with a valid key, i.e. a key that has a valid uid: in the + default trust model, this means the signing key has been signed by + a trusted key. If the tip commit of the side branch is not signed + with a valid key, the merge is aborted. --summary:: --no-summary:: @@ -114,3 +117,11 @@ ifndef::git-pull[] reporting. endif::git-pull[] + +--allow-unrelated-histories:: + By default, `git merge` command refuses to merge histories + that do not share a common ancestor. This option can be + used to override this safety when merging histories of two + projects that started their lives independently. As that is + a very rare occasion, no configuration variable to enable + this by default exists and will not be added. diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt index 7bbd19b..2eb92b9 100644 --- a/Documentation/merge-strategies.txt +++ b/Documentation/merge-strategies.txt @@ -81,9 +81,17 @@ no-renormalize;; Disables the `renormalize` option. This overrides the `merge.renormalize` configuration variable. +no-renames;; + Turn off rename detection. + See also linkgit:git-diff[1] `--no-renames`. + +find-renames[=<n>];; + Turn on rename detection, optionally setting the similarity + threshold. This is the default. + See also linkgit:git-diff[1] `--find-renames`. + rename-threshold=<n>;; - Controls the similarity threshold used for rename detection. - See also linkgit:git-diff[1] `-M`. + Deprecated synonym for `find-renames=<n>`. subtree[=<path>];; This option is a more advanced form of 'subtree' strategy, where diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 671cebd..47b286b 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -143,12 +143,24 @@ ifndef::git-rev-list[] - '%N': commit notes endif::git-rev-list[] - '%GG': raw verification message from GPG for a signed commit -- '%G?': show "G" for a Good signature, "B" for a Bad signature, "U" for a good, - untrusted signature and "N" for no signature +- '%G?': show "G" for a good (valid) signature, + "B" for a bad signature, + "U" for a good signature with unknown validity, + "X" for a good signature that has expired, + "Y" for a good signature made by an expired key, + "R" for a good signature made by a revoked key, + "E" if the signature cannot be checked (e.g. missing key) + and "N" for no signature - '%GS': show the name of the signer for a signed commit - '%GK': show the key used to sign a signed commit -- '%gD': reflog selector, e.g., `refs/stash@{1}` -- '%gd': shortened reflog selector, e.g., `stash@{1}` +- '%gD': reflog selector, e.g., `refs/stash@{1}` or + `refs/stash@{2 minutes ago`}; the format follows the rules described + for the `-g` option. The portion before the `@` is the refname as + given on the command line (so `git log -g refs/heads/master` would + yield `refs/heads/master@{0}`). +- '%gd': shortened reflog selector; same as `%gD`, but the refname + portion is shortened for human readability (so `refs/heads/master` + becomes just `master`). - '%gn': reflog identity name - '%gN': reflog identity name (respecting .mailmap, see linkgit:git-shortlog[1] or linkgit:git-blame[1]) @@ -160,13 +172,14 @@ endif::git-rev-list[] - '%Cgreen': switch color to green - '%Cblue': switch color to blue - '%Creset': reset color -- '%C(...)': color specification, as described in color.branch.* config option; +- '%C(...)': color specification, as described under Values in the + "CONFIGURATION FILE" section of linkgit:git-config[1]; adding `auto,` at the beginning will emit color only when colors are enabled for log output (by `color.diff`, `color.ui`, or `--color`, and respecting the `auto` settings of the former if we are going to a terminal). `auto` alone (i.e. `%C(auto)`) will turn on auto coloring on the next placeholders until the color is switched again. -- '%m': left, right or boundary mark +- '%m': left (`<`), right (`>`) or boundary (`-`) mark - '%n': newline - '%%': a raw '%' - '%x00': print a byte from a hex code @@ -186,6 +199,8 @@ endif::git-rev-list[] than given and there are spaces on its left, use those spaces - '%><(<N>)', '%><|(<N>)': similar to '% <(<N>)', '%<|(<N>)' respectively, but padding both sides (i.e. the text is centered) +-%(trailers): display the trailers of the body as interpreted by + linkgit:git-interpret-trailers[1] NOTE: Some placeholders may depend on other options given to the revision traversal engine. For example, the `%g*` reflog options will diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt index 4b659ac..e44fc8f 100644 --- a/Documentation/pretty-options.txt +++ b/Documentation/pretty-options.txt @@ -26,7 +26,7 @@ people using 80-column terminals. --no-abbrev-commit:: Show the full 40-byte hexadecimal commit object name. This negates `--abbrev-commit` and those options which imply it such as - "--oneline". It also overrides the 'log.abbrevCommit' variable. + "--oneline". It also overrides the `log.abbrevCommit` variable. --oneline:: This is a shorthand for "--pretty=oneline --abbrev-commit" @@ -42,8 +42,22 @@ people using 80-column terminals. verbatim; this means that invalid sequences in the original commit may be copied to the output. +--expand-tabs=<n>:: +--expand-tabs:: +--no-expand-tabs:: + Perform a tab expansion (replace each tab with enough spaces + to fill to the next display column that is multiple of '<n>') + in the log message before showing it in the output. + `--expand-tabs` is a short-hand for `--expand-tabs=8`, and + `--no-expand-tabs` is a short-hand for `--expand-tabs=0`, + which disables tab expansion. ++ +By default, tabs are expanded in pretty formats that indent the log +message by 4 spaces (i.e. 'medium', which is the default, 'full', +and 'fuller'). + ifndef::git-rev-list[] ---notes[=<ref>]:: +--notes[=<treeish>]:: Show the notes (see linkgit:git-notes[1]) that annotate the commit, when showing the commit log message. This is the default for `git log`, `git show` and `git whatchanged` commands when @@ -51,11 +65,11 @@ ifndef::git-rev-list[] on the command line. + By default, the notes shown are from the notes refs listed in the -'core.notesRef' and 'notes.displayRef' variables (or corresponding +`core.notesRef` and `notes.displayRef` variables (or corresponding environment overrides). See linkgit:git-config[1] for more details. + -With an optional '<ref>' argument, show this notes ref instead of the -default notes ref(s). The ref specifies the full refname when it begins +With an optional '<treeish>' argument, use the treeish to find the notes +to display. The treeish can specify the full refname when it begins with `refs/notes/`; when it begins with `notes/`, `refs/` and otherwise `refs/notes/` is prefixed to form a full name of the ref. + @@ -71,7 +85,7 @@ being displayed. Examples: "--notes=foo" will show only notes from "--notes --notes=foo --no-notes --notes=bar" will only show notes from "refs/notes/bar". ---show-notes[=<ref>]:: +--show-notes[=<treeish>]:: --[no-]standard-notes:: These options are deprecated. Use the above --notes/--no-notes options instead. diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 4f009d4..a02f732 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -133,8 +133,8 @@ parents) and `--max-parents=-1` (negative numbers denote no upper limit). for all following revision specifiers, up to the next `--not`. --all:: - Pretend as if all the refs in `refs/` are listed on the - command line as '<commit>'. + Pretend as if all the refs in `refs/`, along with `HEAD`, are + listed on the command line as '<commit>'. --branches[=<pattern>]:: Pretend as if all the refs in `refs/heads` are listed @@ -193,7 +193,7 @@ endif::git-rev-list[] --stdin:: In addition to the '<commit>' listed on the command - line, read them from the standard input. If a '--' separator is + line, read them from the standard input. If a `--` separator is seen, stop reading commits and start reading paths to limit the result. @@ -225,7 +225,7 @@ excluded from the output. --left-only:: --right-only:: - List only commits on the respective side of a symmetric range, + List only commits on the respective side of a symmetric difference, i.e. only those which would be marked `<` resp. `>` by `--left-right`. + @@ -252,10 +252,25 @@ list. + With `--pretty` format other than `oneline` (for obvious reasons), this causes the output to have two extra lines of information -taken from the reflog. By default, 'commit@\{Nth}' notation is -used in the output. When the starting commit is specified as -'commit@\{now}', output also uses 'commit@\{timestamp}' notation -instead. Under `--pretty=oneline`, the commit message is +taken from the reflog. The reflog designator in the output may be shown +as `ref@{Nth}` (where `Nth` is the reverse-chronological index in the +reflog) or as `ref@{timestamp}` (with the timestamp for that entry), +depending on a few rules: ++ +-- +1. If the starting point is specified as `ref@{Nth}`, show the index +format. ++ +2. If the starting point was specified as `ref@{now}`, show the +timestamp format. ++ +3. If neither was used, but `--date` was given on the command line, show +the timestamp in the format requested by `--date`. ++ +4. Otherwise, show the index format. +-- ++ +Under `--pretty=oneline`, the commit message is prefixed with this information on the same line. This option cannot be combined with `--reverse`. See also linkgit:git-reflog[1]. @@ -274,6 +289,10 @@ ifdef::git-rev-list[] Try to speed up the traversal using the pack bitmap index (if one is available). Note that when traversing with `--objects`, trees and blobs will not have their associated path printed. + +--progress=<header>:: + Show progress reports on stderr as objects are considered. The + `<header>` text will be printed with each progress update. endif::git-rev-list[] -- @@ -638,8 +657,9 @@ avoid showing the commits from two parallel development track mixed together. --reverse:: - Output the commits in reverse order. - Cannot be combined with `--walk-reflogs`. + Output the commits chosen to be shown (see Commit Limiting + section above) in reverse order. Cannot be combined with + `--walk-reflogs`. Object Traversal ~~~~~~~~~~~~~~~~ @@ -710,8 +730,8 @@ include::pretty-options.txt[] `iso-local`), the user's local time zone is used instead. + `--date=relative` shows dates relative to the current time, -e.g. ``2 hours ago''. The `-local` option cannot be used with -`--raw` or `--relative`. +e.g. ``2 hours ago''. The `-local` option has no effect for +`--date=relative`. + `--date=local` is an alias for `--date=default-local`. + @@ -731,7 +751,18 @@ format, often found in email messages. + `--date=short` shows only the date, but not the time, in `YYYY-MM-DD` format. + -`--date=raw` shows the date in the internal raw Git format `%s %z` format. +`--date=raw` shows the date as seconds since the epoch (1970-01-01 +00:00:00 UTC), followed by a space, and then the timezone as an offset +from UTC (a `+` or `-` with four digits; the first two are hours, and +the second two are minutes). I.e., as if the timestamp were formatted +with `strftime("%s %z")`). +Note that the `-local` option does not affect the seconds-since-epoch +value (which is always measured in UTC), but does switch the accompanying +timezone value. ++ +`--date=unix` shows the date as a Unix epoch timestamp (seconds since +1970). As with `--raw`, this is always in UTC and therefore `-local` +has no effect. + `--date=format:...` feeds the format `...` to your system `strftime`. Use `--date=format:%c` to show the date in your system locale's @@ -766,7 +797,7 @@ ifdef::git-rev-list[] endif::git-rev-list[] --left-right:: - Mark which side of a symmetric diff a commit is reachable from. + Mark which side of a symmetric difference a commit is reachable from. Commits from the left side are prefixed with `<` and those from the right with `>`. If combined with `--boundary`, those commits are prefixed with `-`. diff --git a/Documentation/revisions.txt b/Documentation/revisions.txt index d85e303..75d211f 100644 --- a/Documentation/revisions.txt +++ b/Documentation/revisions.txt @@ -28,8 +28,8 @@ blobs contained in a commit. first match in the following rules: . If '$GIT_DIR/<refname>' exists, that is what you mean (this is usually - useful only for 'HEAD', 'FETCH_HEAD', 'ORIG_HEAD', 'MERGE_HEAD' - and 'CHERRY_PICK_HEAD'); + useful only for `HEAD`, `FETCH_HEAD`, `ORIG_HEAD`, `MERGE_HEAD` + and `CHERRY_PICK_HEAD`); . otherwise, 'refs/<refname>' if it exists; @@ -41,16 +41,16 @@ blobs contained in a commit. . otherwise, 'refs/remotes/<refname>/HEAD' if it exists. + -'HEAD' names the commit on which you based the changes in the working tree. -'FETCH_HEAD' records the branch which you fetched from a remote repository +`HEAD` names the commit on which you based the changes in the working tree. +`FETCH_HEAD` records the branch which you fetched from a remote repository with your last `git fetch` invocation. -'ORIG_HEAD' is created by commands that move your 'HEAD' in a drastic -way, to record the position of the 'HEAD' before their operation, so that +`ORIG_HEAD` is created by commands that move your `HEAD` in a drastic +way, to record the position of the `HEAD` before their operation, so that you can easily change the tip of the branch back to the state before you ran them. -'MERGE_HEAD' records the commit(s) which you are merging into your branch +`MERGE_HEAD` records the commit(s) which you are merging into your branch when you run `git merge`. -'CHERRY_PICK_HEAD' records the commit which you are cherry-picking +`CHERRY_PICK_HEAD` records the commit which you are cherry-picking when you run `git cherry-pick`. + Note that any of the 'refs/*' cases above may come either from @@ -59,21 +59,21 @@ While the ref name encoding is unspecified, UTF-8 is preferred as some output processing may assume ref names in UTF-8. '@':: - '@' alone is a shortcut for 'HEAD'. + '@' alone is a shortcut for `HEAD`. -'<refname>@\{<date>\}', e.g. 'master@\{yesterday\}', 'HEAD@\{5 minutes ago\}':: +'<refname>@{<date>}', e.g. 'master@\{yesterday\}', 'HEAD@{5 minutes ago}':: A ref followed by the suffix '@' with a date specification enclosed in a brace - pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1 - second ago\}' or '\{1979-02-26 18:30:00\}') specifies the value + pair (e.g. '\{yesterday\}', '{1 month 2 weeks 3 days 1 hour 1 + second ago}' or '{1979-02-26 18:30:00}') specifies the value of the ref at a prior point in time. This suffix may only be used immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<ref>'). Note that this looks up the state of your *local* ref at a given time; e.g., what was in your local 'master' branch last week. If you want to look at commits made during - certain times, see '--since' and '--until'. + certain times, see `--since` and `--until`. -'<refname>@\{<n>\}', e.g. 'master@\{1\}':: +'<refname>@{<n>}', e.g. 'master@\{1\}':: A ref followed by the suffix '@' with an ordinal specification enclosed in a brace pair (e.g. '\{1\}', '\{15\}') specifies the n-th prior value of that ref. For example 'master@\{1\}' @@ -82,13 +82,13 @@ some output processing may assume ref names in UTF-8. immediately following a ref name and the ref must have an existing log ('$GIT_DIR/logs/<refname>'). -'@\{<n>\}', e.g. '@\{1\}':: +'@{<n>}', e.g. '@\{1\}':: You can use the '@' construct with an empty ref part to get at a reflog entry of the current branch. For example, if you are on branch 'blabla' then '@\{1\}' means the same as 'blabla@\{1\}'. -'@\{-<n>\}', e.g. '@\{-1\}':: - The construct '@\{-<n>\}' means the <n>th branch/commit checked out +'@{-<n>}', e.g. '@{-1}':: + The construct '@{-<n>}' means the <n>th branch/commit checked out before the current one. '<branchname>@\{upstream\}', e.g. 'master@\{upstream\}', '@\{u\}':: @@ -96,12 +96,13 @@ some output processing may assume ref names in UTF-8. refers to the branch that the branch specified by branchname is set to build on top of (configured with `branch.<name>.remote` and `branch.<name>.merge`). A missing branchname defaults to the - current one. + current one. These suffixes are also accepted when spelled in uppercase, and + they mean the same thing no matter the case. '<branchname>@\{push\}', e.g. 'master@\{push\}', '@\{push\}':: The suffix '@\{push}' reports the branch "where we would push to" if `git push` were run while `branchname` was checked out (or the current - 'HEAD' if no branchname is specified). Since our push destination is + `HEAD` if no branchname is specified). Since our push destination is in a remote repository, of course, we report the local tracking branch that corresponds to that branch (i.e., something in 'refs/remotes/'). + @@ -122,6 +123,9 @@ refs/remotes/myfork/mybranch Note in the example that we set up a triangular workflow, where we pull from one location and push to another. In a non-triangular workflow, '@\{push}' is the same as '@\{upstream}', and there is no need for it. ++ +This suffix is also accepted when spelled in uppercase, and means the same +thing no matter the case. '<rev>{caret}', e.g. 'HEAD{caret}, v1.5.1{caret}0':: A suffix '{caret}' to a revision parameter means the first parent of @@ -139,7 +143,7 @@ from one location and push to another. In a non-triangular workflow, '<rev>{caret}1{caret}1{caret}1'. See below for an illustration of the usage of this form. -'<rev>{caret}\{<type>\}', e.g. 'v0.99.8{caret}\{commit\}':: +'<rev>{caret}{<type>}', e.g. 'v0.99.8{caret}\{commit\}':: A suffix '{caret}' followed by an object type name enclosed in brace pair means dereference the object at '<rev>' recursively until an object of type '<type>' is found or the object cannot be @@ -159,13 +163,13 @@ it does not have to be dereferenced even once to get to an object. 'rev{caret}\{tag\}' can be used to ensure that 'rev' identifies an existing tag object. -'<rev>{caret}\{\}', e.g. 'v0.99.8{caret}\{\}':: +'<rev>{caret}{}', e.g. 'v0.99.8{caret}{}':: A suffix '{caret}' followed by an empty brace pair means the object could be a tag, and dereference the tag recursively until a non-tag object is found. -'<rev>{caret}\{/<text>\}', e.g. 'HEAD^{/fix nasty bug}':: +'<rev>{caret}{/<text>}', e.g. 'HEAD^{/fix nasty bug}':: A suffix '{caret}' to a revision parameter, followed by a brace pair that contains a text led by a slash, is the same as the ':/fix nasty bug' syntax below except that @@ -176,11 +180,12 @@ existing tag object. A colon, followed by a slash, followed by a text, names a commit whose commit message matches the specified regular expression. This name returns the youngest matching commit which is - reachable from any ref. If the commit message starts with a - '!' you have to repeat that; the special sequence ':/!', - followed by something else than '!', is reserved for now. - The regular expression can match any part of the commit message. To - match messages starting with a string, one can use e.g. ':/^foo'. + reachable from any ref. The regular expression can match any part of the + commit message. To match messages starting with a string, one can use + e.g. ':/^foo'. The special sequence ':/!' is reserved for modifiers to what + is matched. ':/!-foo' performs a negative match, while ':/!!foo' matches a + literal '!' character, followed by 'foo'. Any other sequence beginning with + ':/!' is reserved for now. '<rev>:<path>', e.g. 'HEAD:README', ':README', 'master:./README':: A suffix ':' followed by a path names the blob or tree @@ -236,58 +241,91 @@ SPECIFYING RANGES ----------------- History traversing commands such as `git log` operate on a set -of commits, not just a single commit. To these commands, -specifying a single revision with the notation described in the -previous section means the set of commits reachable from that -commit, following the commit ancestry chain. - -To exclude commits reachable from a commit, a prefix '{caret}' -notation is used. E.g. '{caret}r1 r2' means commits reachable -from 'r2' but exclude the ones reachable from 'r1'. - -This set operation appears so often that there is a shorthand -for it. When you have two commits 'r1' and 'r2' (named according -to the syntax explained in SPECIFYING REVISIONS above), you can ask -for commits that are reachable from r2 excluding those that are reachable -from r1 by '{caret}r1 r2' and it can be written as 'r1..r2'. - -A similar notation 'r1\...r2' is called symmetric difference -of 'r1' and 'r2' and is defined as -'r1 r2 --not $(git merge-base --all r1 r2)'. -It is the set of commits that are reachable from either one of -'r1' or 'r2' but not from both. - -In these two shorthands, you can omit one end and let it default to HEAD. +of commits, not just a single commit. + +For these commands, +specifying a single revision, using the notation described in the +previous section, means the set of commits `reachable` from the given +commit. + +A commit's reachable set is the commit itself and the commits in +its ancestry chain. + + +Commit Exclusions +~~~~~~~~~~~~~~~~~ + +'{caret}<rev>' (caret) Notation:: + To exclude commits reachable from a commit, a prefix '{caret}' + notation is used. E.g. '{caret}r1 r2' means commits reachable + from 'r2' but exclude the ones reachable from 'r1' (i.e. 'r1' and + its ancestors). + +Dotted Range Notations +~~~~~~~~~~~~~~~~~~~~~~ + +The '..' (two-dot) Range Notation:: + The '{caret}r1 r2' set operation appears so often that there is a shorthand + for it. When you have two commits 'r1' and 'r2' (named according + to the syntax explained in SPECIFYING REVISIONS above), you can ask + for commits that are reachable from r2 excluding those that are reachable + from r1 by '{caret}r1 r2' and it can be written as 'r1..r2'. + +The '...' (three dot) Symmetric Difference Notation:: + A similar notation 'r1\...r2' is called symmetric difference + of 'r1' and 'r2' and is defined as + 'r1 r2 --not $(git merge-base --all r1 r2)'. + It is the set of commits that are reachable from either one of + 'r1' (left side) or 'r2' (right side) but not from both. + +In these two shorthand notations, you can omit one end and let it default to HEAD. For example, 'origin..' is a shorthand for 'origin..HEAD' and asks "What did I do since I forked from the origin branch?" Similarly, '..origin' is a shorthand for 'HEAD..origin' and asks "What did the origin do since I forked from them?" Note that '..' would mean 'HEAD..HEAD' which is an empty range that is both reachable and unreachable from HEAD. -Two other shorthands for naming a set that is formed by a commit -and its parent commits exist. The 'r1{caret}@' notation means all -parents of 'r1'. 'r1{caret}!' includes commit 'r1' but excludes -all of its parents. +Other <rev>{caret} Parent Shorthand Notations +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Three other shorthands exist, particularly useful for merge commits, +for naming a set that is formed by a commit and its parent commits. + +The 'r1{caret}@' notation means all parents of 'r1'. + +The 'r1{caret}!' notation includes commit 'r1' but excludes all of its parents. +By itself, this notation denotes the single commit 'r1'. + +The '<rev>{caret}-{<n>}' notation includes '<rev>' but excludes the <n>th +parent (i.e. a shorthand for '<rev>{caret}<n>..<rev>'), with '<n>' = 1 if +not given. This is typically useful for merge commits where you +can just pass '<commit>{caret}-' to get all the commits in the branch +that was merged in merge commit '<commit>' (including '<commit>' +itself). + +While '<rev>{caret}<n>' was about specifying a single commit parent, these +three notations also consider its parents. For example you can say +'HEAD{caret}2{caret}@', however you cannot say 'HEAD{caret}@{caret}2'. -To summarize: +Revision Range Summary +---------------------- '<rev>':: - Include commits that are reachable from (i.e. ancestors of) - <rev>. + Include commits that are reachable from <rev> (i.e. <rev> and its + ancestors). '{caret}<rev>':: - Exclude commits that are reachable from (i.e. ancestors of) - <rev>. + Exclude commits that are reachable from <rev> (i.e. <rev> and its + ancestors). '<rev1>..<rev2>':: Include commits that are reachable from <rev2> but exclude those that are reachable from <rev1>. When either <rev1> or - <rev2> is omitted, it defaults to 'HEAD'. + <rev2> is omitted, it defaults to `HEAD`. '<rev1>\...<rev2>':: Include commits that are reachable from either <rev1> or <rev2> but exclude those that are reachable from both. When - either <rev1> or <rev2> is omitted, it defaults to 'HEAD'. + either <rev1> or <rev2> is omitted, it defaults to `HEAD`. '<rev>{caret}@', e.g. 'HEAD{caret}@':: A suffix '{caret}' followed by an at sign is the same as listing @@ -299,16 +337,33 @@ To summarize: as giving commit '<rev>' and then all its parents prefixed with '{caret}' to exclude them (and their ancestors). -Here are a handful of examples: - - D G H D - D F G H I J D F - ^G D H D - ^D B E I J F B - B..C C - B...C G H D E B C - ^D B C E I J F B C - C I J F C - C^@ I J F - C^! C - F^! D G H D F +'<rev>{caret}-{<n>}', e.g. 'HEAD{caret}-, HEAD{caret}-2':: + Equivalent to '<rev>{caret}<n>..<rev>', with '<n>' = 1 if not + given. + +Here are a handful of examples using the Loeliger illustration above, +with each step in the notation's expansion and selection carefully +spelt out: + + Args Expanded arguments Selected commits + D G H D + D F G H I J D F + ^G D H D + ^D B E I J F B + ^D B C E I J F B C + C I J F C + B..C = ^B C C + B...C = B ^F C G H D E B C + B^- = B^..B + = ^B^1 B E I J F B + C^@ = C^1 + = F I J F + B^@ = B^1 B^2 B^3 + = D E F D G H E F I J + C^! = C ^C^@ + = C ^C^1 + = C ^F C + B^! = B ^B^@ + = B ^B^1 ^B^2 ^B^3 + = B ^D ^E ^F B + F^! D = F ^I ^J D G H D F diff --git a/Documentation/technical/api-argv-array.txt b/Documentation/technical/api-argv-array.txt index 8076172..cfc0630 100644 --- a/Documentation/technical/api-argv-array.txt +++ b/Documentation/technical/api-argv-array.txt @@ -56,3 +56,10 @@ Functions `argv_array_clear`:: Free all memory associated with the array and return it to the initial, empty state. + +`argv_array_detach`:: + Disconnect the `argv` member from the `argv_array` struct and + return it. The caller is responsible for freeing the memory used + by the array, and by the strings it references. After detaching, + the `argv_array` is in a reinitialized state and can be pushed + into again. diff --git a/Documentation/technical/api-config.txt b/Documentation/technical/api-config.txt index 0d8b99b..20741f3 100644 --- a/Documentation/technical/api-config.txt +++ b/Documentation/technical/api-config.txt @@ -63,13 +63,6 @@ parse for configuration, rather than looking in the usual files. Regular Specify whether include directives should be followed in parsed files. Regular `git_config` defaults to `1`. -There is a special version of `git_config` called `git_config_early`. -This version takes an additional parameter to specify the repository -config, instead of having it looked up via `git_path`. This is useful -early in a Git program before the repository has been found. Unless -you're working with early setup code, you probably don't want to use -this. - Reading Specific Files ---------------------- diff --git a/Documentation/technical/api-credentials.txt b/Documentation/technical/api-credentials.txt index e44426d..75368f2 100644 --- a/Documentation/technical/api-credentials.txt +++ b/Documentation/technical/api-credentials.txt @@ -243,7 +243,7 @@ appended to its command line, which is one of: The details of the credential will be provided on the helper's stdin stream. The exact format is the same as the input/output format of the `git credential` plumbing command (see the section `INPUT/OUTPUT -FORMAT` in linkgit:git-credential[7] for a detailed specification). +FORMAT` in linkgit:git-credential[1] for a detailed specification). For a `get` operation, the helper should produce a list of attributes on stdout in the same format. A helper is free to produce a subset, or @@ -268,4 +268,4 @@ See also linkgit:gitcredentials[7] -linkgit:git-config[5] (See configuration variables `credential.*`) +linkgit:git-config[1] (See configuration variables `credential.*`) diff --git a/Documentation/technical/api-gitattributes.txt b/Documentation/technical/api-gitattributes.txt index 2602668..e7cbb7c 100644 --- a/Documentation/technical/api-gitattributes.txt +++ b/Documentation/technical/api-gitattributes.txt @@ -16,10 +16,15 @@ Data Structure of no interest to the calling programs. The name of the attribute can be retrieved by calling `git_attr_name()`. -`struct git_attr_check`:: +`struct attr_check_item`:: - This structure represents a set of attributes to check in a call - to `git_check_attr()` function, and receives the results. + This structure represents one attribute and its value. + +`struct attr_check`:: + + This structure represents a collection of `attr_check_item`. + It is passed to `git_check_attr()` function, specifying the + attributes to check, and receives their values. Attribute Values @@ -27,7 +32,7 @@ Attribute Values An attribute for a path can be in one of four states: Set, Unset, Unspecified or set to a string, and `.value` member of `struct -git_attr_check` records it. There are three macros to check these: +attr_check_item` records it. There are three macros to check these: `ATTR_TRUE()`:: @@ -48,49 +53,51 @@ value of the attribute for the path. Querying Specific Attributes ---------------------------- -* Prepare an array of `struct git_attr_check` to define the list of - attributes you would want to check. To populate this array, you would - need to define necessary attributes by calling `git_attr()` function. +* Prepare `struct attr_check` using attr_check_initl() + function, enumerating the names of attributes whose values you are + interested in, terminated with a NULL pointer. Alternatively, an + empty `struct attr_check` can be prepared by calling + `attr_check_alloc()` function and then attributes you want to + ask about can be added to it with `attr_check_append()` + function. * Call `git_check_attr()` to check the attributes for the path. -* Inspect `git_attr_check` structure to see how each of the attribute in - the array is defined for the path. +* Inspect `attr_check` structure to see how each of the + attribute in the array is defined for the path. Example ------- -To see how attributes "crlf" and "indent" are set for different paths. +To see how attributes "crlf" and "ident" are set for different paths. -. Prepare an array of `struct git_attr_check` with two elements (because - we are checking two attributes). Initialize their `attr` member with - pointers to `struct git_attr` obtained by calling `git_attr()`: +. Prepare a `struct attr_check` with two elements (because + we are checking two attributes): ------------ -static struct git_attr_check check[2]; +static struct attr_check *check; static void setup_check(void) { - if (check[0].attr) + if (check) return; /* already done */ - check[0].attr = git_attr("crlf"); - check[1].attr = git_attr("ident"); + check = attr_check_initl("crlf", "ident", NULL); } ------------ -. Call `git_check_attr()` with the prepared array of `struct git_attr_check`: +. Call `git_check_attr()` with the prepared `struct attr_check`: ------------ const char *path; setup_check(); - git_check_attr(path, ARRAY_SIZE(check), check); + git_check_attr(path, check); ------------ -. Act on `.value` member of the result, left in `check[]`: +. Act on `.value` member of the result, left in `check->items[]`: ------------ - const char *value = check[0].value; + const char *value = check->items[0].value; if (ATTR_TRUE(value)) { The attribute is Set, by listing only the name of the @@ -109,20 +116,39 @@ static void setup_check(void) } ------------ +To see how attributes in argv[] are set for different paths, only +the first step in the above would be different. + +------------ +static struct attr_check *check; +static void setup_check(const char **argv) +{ + check = attr_check_alloc(); + while (*argv) { + struct git_attr *attr = git_attr(*argv); + attr_check_append(check, attr); + argv++; + } +} +------------ + Querying All Attributes ----------------------- To get the values of all attributes associated with a file: -* Call `git_all_attrs()`, which returns an array of `git_attr_check` - structures. +* Prepare an empty `attr_check` structure by calling + `attr_check_alloc()`. + +* Call `git_all_attrs()`, which populates the `attr_check` + with the attributes attached to the path. -* Iterate over the `git_attr_check` array to examine the attribute - names and values. The name of the attribute described by a - `git_attr_check` object can be retrieved via - `git_attr_name(check[i].attr)`. (Please note that no items will be - returned for unset attributes, so `ATTR_UNSET()` will return false - for all returned `git_array_check` objects.) +* Iterate over the `attr_check.items[]` array to examine + the attribute names and values. The name of the attribute + described by a `attr_check.items[]` object can be retrieved via + `git_attr_name(check->items[i].attr)`. (Please note that no items + will be returned for unset attributes, so `ATTR_UNSET()` will return + false for all returned `attr_check.items[]` objects.) -* Free the `git_array_check` array. +* Free the `attr_check` struct by calling `attr_check_free()`. diff --git a/Documentation/technical/api-hashmap.txt b/Documentation/technical/api-hashmap.txt index ad7a5bd..ccc634b 100644 --- a/Documentation/technical/api-hashmap.txt +++ b/Documentation/technical/api-hashmap.txt @@ -21,6 +21,9 @@ that the hashmap is initialized. It may also be useful for statistical purposes `cmpfn` stores the comparison function specified in `hashmap_init()`. In advanced scenarios, it may be useful to change this, e.g. to switch between case-sensitive and case-insensitive lookup. ++ +When `disallow_rehash` is set, automatic rehashes are prevented during inserts +and deletes. `struct hashmap_entry`:: @@ -57,6 +60,7 @@ Functions `unsigned int strihash(const char *buf)`:: `unsigned int memhash(const void *buf, size_t len)`:: `unsigned int memihash(const void *buf, size_t len)`:: +`unsigned int memihash_cont(unsigned int hash_seed, const void *buf, size_t len)`:: Ready-to-use hash functions for strings, using the FNV-1 algorithm (see http://www.isthe.com/chongo/tech/comp/fnv). @@ -65,6 +69,9 @@ Functions `memihash` operate on arbitrary-length memory. + `strihash` and `memihash` are case insensitive versions. ++ +`memihash_cont` is a variant of `memihash` that allows a computation to be +continued with another chunk of data. `unsigned int sha1hash(const unsigned char *sha1)`:: @@ -104,6 +111,11 @@ If `free_entries` is true, each hashmap_entry in the map is freed as well `entry` points to the entry to initialize. + `hash` is the hash code of the entry. ++ +The hashmap_entry structure does not hold references to external resources, +and it is safe to just discard it once you are done with it (i.e. if +your structure was allocated with xmalloc(), you can just free(3) it, +and if it is on stack, you can just let it go out of scope). `void *hashmap_get(const struct hashmap *map, const void *key, const void *keydata)`:: @@ -179,11 +191,28 @@ passed to `hashmap_cmp_fn` to decide whether the entry matches the key. + Returns the removed entry, or NULL if not found. +`void hashmap_disallow_rehash(struct hashmap *map, unsigned value)`:: + + Disallow/allow automatic rehashing of the hashmap during inserts + and deletes. ++ +This is useful if the caller knows that the hashmap will be accessed +by multiple threads. ++ +The caller is still responsible for any necessary locking; this simply +prevents unexpected rehashing. The caller is also responsible for properly +sizing the initial hashmap to ensure good performance. ++ +A call to allow rehashing does not force a rehash; that might happen +with the next insert or delete. + `void hashmap_iter_init(struct hashmap *map, struct hashmap_iter *iter)`:: `void *hashmap_iter_next(struct hashmap_iter *iter)`:: `void *hashmap_iter_first(struct hashmap *map, struct hashmap_iter *iter)`:: - Used to iterate over all entries of a hashmap. + Used to iterate over all entries of a hashmap. Note that it is + not safe to add or remove entries to the hashmap while + iterating. + `hashmap_iter_init` initializes a `hashmap_iter` structure. + diff --git a/Documentation/technical/api-in-core-index.txt b/Documentation/technical/api-in-core-index.txt deleted file mode 100644 index adbdbf5..0000000 --- a/Documentation/technical/api-in-core-index.txt +++ /dev/null @@ -1,21 +0,0 @@ -in-core index API -================= - -Talk about <read-cache.c> and <cache-tree.c>, things like: - -* cache -> the_index macros -* read_index() -* write_index() -* ie_match_stat() and ie_modified(); how they are different and when to - use which. -* index_name_pos() -* remove_index_entry_at() -* remove_file_from_index() -* add_file_to_index() -* add_index_entry() -* refresh_index() -* discard_index() -* cache_tree_invalidate_path() -* cache_tree_update() - -(JC, Linus) diff --git a/Documentation/technical/api-parse-options.txt b/Documentation/technical/api-parse-options.txt index 5f0757d..36768b4 100644 --- a/Documentation/technical/api-parse-options.txt +++ b/Documentation/technical/api-parse-options.txt @@ -144,8 +144,12 @@ There are some macros to easily define options: `OPT_COUNTUP(short, long, &int_var, description)`:: Introduce a count-up option. - `int_var` is incremented on each use of `--option`, and - reset to zero with `--no-option`. + Each use of `--option` increments `int_var`, starting from zero + (even if initially negative), and `--no-option` resets it to + zero. To determine if `--option` or `--no-option` was encountered at + all, initialize `int_var` to a negative value, and if it is still + negative after parse_options(), then neither `--option` nor + `--no-option` was seen. `OPT_BIT(short, long, &int_var, description, mask)`:: Introduce a boolean option. @@ -164,6 +168,11 @@ There are some macros to easily define options: Introduce an option with string argument. The string argument is put into `str_var`. +`OPT_STRING_LIST(short, long, &struct string_list, arg_str, description)`:: + Introduce an option with string argument. + The string argument is stored as an element in `string_list`. + Use of `--no-option` will clear the list of preceding values. + `OPT_INTEGER(short, long, &int_var, description)`:: Introduce an option with integer argument. The integer is put into `int_var`. @@ -231,6 +240,13 @@ There are some macros to easily define options: pass the command-line option, which can be specified multiple times, to another command. +`OPT_CMDMODE(short, long, &int_var, description, enum_val)`:: + Define an "operation mode" option, only one of which in the same + group of "operating mode" options that share the same `int_var` + can be given by the user. `enum_val` is set to `int_var` when the + option is used, but an error is reported if other "operating mode" + option has already set its value to the same `int_var`. + The last element of the array must be `OPT_END()`. diff --git a/Documentation/technical/api-remote.txt b/Documentation/technical/api-remote.txt index 2cfdd22..f10941b 100644 --- a/Documentation/technical/api-remote.txt +++ b/Documentation/technical/api-remote.txt @@ -51,6 +51,10 @@ struct remote The proxy to use for curl (http, https, ftp, etc.) URLs. +`http_proxy_authmethod`:: + + The method used for authenticating against `http_proxy`. + struct remotes can be found by name with remote_get(), and iterated through with for_each_remote(). remote_get(NULL) will return the default remote, given the current branch and configuration. diff --git a/Documentation/technical/api-setup.txt b/Documentation/technical/api-setup.txt index 540e455..eb1fa98 100644 --- a/Documentation/technical/api-setup.txt +++ b/Documentation/technical/api-setup.txt @@ -27,8 +27,6 @@ parse_pathspec(). This function takes several arguments: - prefix and args come from cmd_* functions -get_pathspec() is obsolete and should never be used in new code. - parse_pathspec() helps catch unsupported features and reject them politely. At a lower level, different pathspec-related functions may not support the same set of features. Such pathspec-sensitive diff --git a/Documentation/technical/api-sha1-array.txt b/Documentation/technical/api-sha1-array.txt index 3e75497..dcc5294 100644 --- a/Documentation/technical/api-sha1-array.txt +++ b/Documentation/technical/api-sha1-array.txt @@ -38,16 +38,20 @@ Functions `sha1_array_for_each_unique`:: Efficiently iterate over each unique element of the list, executing the callback function for each one. If the array is - not sorted, this function has the side effect of sorting it. + not sorted, this function has the side effect of sorting it. If + the callback returns a non-zero value, the iteration ends + immediately and the callback's return is propagated; otherwise, + 0 is returned. Examples -------- ----------------------------------------- -void print_callback(const unsigned char sha1[20], +int print_callback(const unsigned char sha1[20], void *data) { printf("%s\n", sha1_to_hex(sha1)); + return 0; /* always continue */ } void some_func(void) diff --git a/Documentation/technical/api-submodule-config.txt b/Documentation/technical/api-submodule-config.txt index 941fa17..3dce003 100644 --- a/Documentation/technical/api-submodule-config.txt +++ b/Documentation/technical/api-submodule-config.txt @@ -47,16 +47,20 @@ Functions Can be passed to the config parsing infrastructure to parse local (worktree) submodule configurations. -`const struct submodule *submodule_from_path(const unsigned char *commit_sha1, const char *path)`:: +`const struct submodule *submodule_from_path(const unsigned char *treeish_name, const char *path)`:: - Lookup values for one submodule by its commit_sha1 and path. + Given a tree-ish in the superproject and a path, return the + submodule that is bound at the path in the named tree. -`const struct submodule *submodule_from_name(const unsigned char *commit_sha1, const char *name)`:: +`const struct submodule *submodule_from_name(const unsigned char *treeish_name, const char *name)`:: The same as above but lookup by name. -If given the null_sha1 as commit_sha1 the local configuration of a -submodule will be returned (e.g. consolidated values from local git +Whenever a submodule configuration is parsed in `parse_submodule_config_option` +via e.g. `gitmodules_config()`, it will overwrite the null_sha1 entry. +So in the normal case, when HEAD:.gitmodules is parsed first and then overlayed +with the repository configuration, the null_sha1 entry contains the local +configuration of a submodule (e.g. consolidated values from local git configuration and the .gitmodules file in the worktree). For an example usage see test-submodule-config.c. diff --git a/Documentation/technical/api-trace.txt b/Documentation/technical/api-trace.txt index 097a651..fadb597 100644 --- a/Documentation/technical/api-trace.txt +++ b/Documentation/technical/api-trace.txt @@ -28,7 +28,7 @@ static struct trace_key trace_foo = TRACE_KEY_INIT(FOO); static void trace_print_foo(const char *message) { - trace_print_key(&trace_foo, message); + trace_printf_key(&trace_foo, "%s", message); } ------------ + @@ -95,3 +95,46 @@ for (;;) { } trace_performance(t, "frotz"); ------------ + +Bugs & Caveats +-------------- + +GIT_TRACE_* environment variables can be used to tell Git to show +trace output to its standard error stream. Git can often spawn a pager +internally to run its subcommand and send its standard output and +standard error to it. + +Because GIT_TRACE_PERFORMANCE trace is generated only at the very end +of the program with atexit(), which happens after the pager exits, it +would not work well if you send its log to the standard error output +and let Git spawn the pager at the same time. + +As a work around, you can for example use '--no-pager', or set +GIT_TRACE_PERFORMANCE to another file descriptor which is redirected +to stderr, or set GIT_TRACE_PERFORMANCE to a file specified by its +absolute path. + +For example instead of the following command which by default may not +print any performance information: + +------------ +GIT_TRACE_PERFORMANCE=2 git log -1 +------------ + +you may want to use: + +------------ +GIT_TRACE_PERFORMANCE=2 git --no-pager log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=3 3>&2 git log -1 +------------ + +or: + +------------ +GIT_TRACE_PERFORMANCE=/path/to/log/file git log -1 +------------ diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt index c6977bb..c59ac99 100644 --- a/Documentation/technical/pack-protocol.txt +++ b/Documentation/technical/pack-protocol.txt @@ -219,7 +219,9 @@ out of what the server said it could do with the first 'want' line. shallow-line = PKT-LINE("shallow" SP obj-id) - depth-request = PKT-LINE("deepen" SP depth) + depth-request = PKT-LINE("deepen" SP depth) / + PKT-LINE("deepen-since" SP timestamp) / + PKT-LINE("deepen-not" SP ref) first-want = PKT-LINE("want" SP obj-id SP capability-list) additional-want = PKT-LINE("want" SP obj-id) @@ -307,7 +309,7 @@ In multi_ack mode: ready to make a packfile, it will blindly ACK all 'have' obj-ids back to the client. - * the server will then send a 'NACK' and then wait for another response + * the server will then send a 'NAK' and then wait for another response from the client - either a 'done' or another list of 'have' lines. In multi_ack_detailed mode: @@ -454,7 +456,8 @@ The reference discovery phase is done nearly the same way as it is in the fetching protocol. Each reference obj-id and name on the server is sent in packet-line format to the client, followed by a flush-pkt. The only real difference is that the capability listing is different - the only -possible values are 'report-status', 'delete-refs' and 'ofs-delta'. +possible values are 'report-status', 'delete-refs', 'ofs-delta' and +'push-options'. Reference Update Request and Packfile Transfer ---------------------------------------------- @@ -465,9 +468,10 @@ that it wants to update, it sends a line listing the obj-id currently on the server, the obj-id the client would like to update it to and the name of the reference. -This list is followed by a flush-pkt and then the packfile that should -contain all the objects that the server will need to complete the new -references. +This list is followed by a flush-pkt. Then the push options are transmitted +one per packet followed by another flush-pkt. After that the packfile that +should contain all the objects that the server will need to complete the new +references will be sent. ---- update-request = *shallow ( command-list | push-cert ) [packfile] @@ -526,7 +530,7 @@ Push Certificate A push certificate begins with a set of header lines. After the header and an empty line, the protocol commands follow, one per -line. Note that the the trailing LF in push-cert PKT-LINEs is _not_ +line. Note that the trailing LF in push-cert PKT-LINEs is _not_ optional; it must be present. Currently, the following header fields are defined: diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt index eaab6b4..26dcc6f 100644 --- a/Documentation/technical/protocol-capabilities.txt +++ b/Documentation/technical/protocol-capabilities.txt @@ -179,6 +179,31 @@ This capability adds "deepen", "shallow" and "unshallow" commands to the fetch-pack/upload-pack protocol so clients can request shallow clones. +deepen-since +------------ + +This capability adds "deepen-since" command to fetch-pack/upload-pack +protocol so the client can request shallow clones that are cut at a +specific time, instead of depth. Internally it's equivalent of doing +"rev-list --max-age=<timestamp>" on the server side. "deepen-since" +cannot be used with "deepen". + +deepen-not +---------- + +This capability adds "deepen-not" command to fetch-pack/upload-pack +protocol so the client can request shallow clones that are cut at a +specific revision, instead of depth. Internally it's equivalent of +doing "rev-list --not <rev>" on the server side. "deepen-not" +cannot be used with "deepen", but can be used with "deepen-since". + +deepen-relative +--------------- + +If this capability is requested by the client, the semantics of +"deepen" command is changed. The "depth" argument is the depth from +the current shallow boundary, instead of the depth from remote refs. + no-progress ----------- @@ -253,6 +278,15 @@ atomic pushes. If the pushing client requests this capability, the server will update the refs in one atomic transaction. Either all refs are updated or none. +push-options +------------ + +If the server sends the 'push-options' capability it is able to accept +push options after the update commands have been sent, but before the +packfile is streamed. If the pushing client requests this capability, +the server will pass the options to the pre- and post- receive hooks +that process this push request. + allow-tip-sha1-in-want ---------------------- diff --git a/Documentation/technical/protocol-common.txt b/Documentation/technical/protocol-common.txt index bf30167..ecedb34 100644 --- a/Documentation/technical/protocol-common.txt +++ b/Documentation/technical/protocol-common.txt @@ -67,9 +67,9 @@ with non-binary data the same whether or not they contain the trailing LF (stripping the LF if present, and not complaining when it is missing). -The maximum length of a pkt-line's data component is 65520 bytes. -Implementations MUST NOT send pkt-line whose length exceeds 65524 -(65520 bytes of payload + 4 bytes of length data). +The maximum length of a pkt-line's data component is 65516 bytes. +Implementations MUST NOT send pkt-line whose length exceeds 65520 +(65516 bytes of payload + 4 bytes of length data). Implementations SHOULD NOT send an empty pkt-line ("0004"). diff --git a/Documentation/technical/signature-format.txt b/Documentation/technical/signature-format.txt new file mode 100644 index 0000000..2c9406a --- /dev/null +++ b/Documentation/technical/signature-format.txt @@ -0,0 +1,186 @@ +Git signature format +==================== + +== Overview + +Git uses cryptographic signatures in various places, currently objects (tags, +commits, mergetags) and transactions (pushes). In every case, the command which +is about to create an object or transaction determines a payload from that, +calls gpg to obtain a detached signature for the payload (`gpg -bsa`) and +embeds the signature into the object or transaction. + +Signatures always begin with `-----BEGIN PGP SIGNATURE-----` +and end with `-----END PGP SIGNATURE-----`, unless gpg is told to +produce RFC1991 signatures which use `MESSAGE` instead of `SIGNATURE`. + +The signed payload and the way the signature is embedded depends +on the type of the object resp. transaction. + +== Tag signatures + +- created by: `git tag -s` +- payload: annotated tag object +- embedding: append the signature to the unsigned tag object +- example: tag `signedtag` with subject `signed tag` + +---- +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +-----BEGIN PGP SIGNATURE----- +Version: GnuPG v1 + +iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn +rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh +8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods +q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 +rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x +lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= +=jpXa +-----END PGP SIGNATURE----- +---- + +- verify with: `git verify-tag [-v]` or `git tag -v` + +---- +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +object 04b871796dc0420f8e7561a895b52484b701d51a +type commit +tag signedtag +tagger C O Mitter <committer@example.com> 1465981006 +0000 + +signed tag + +signed tag message body +---- + +== Commit signatures + +- created by: `git commit -S` +- payload: commit object +- embedding: header entry `gpgsig` + (content is preceded by a space) +- example: commit with subject `signed commit` + +---- +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 +gpgsig -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRjRAAoJEGEJLoW3InGJ3IwIAIY4SA6GxY3BjL60YyvsJPh/ + HRCJwH+w7wt3Yc/9/bW2F+gF72kdHOOs2jfv+OZhq0q4OAN6fvVSczISY/82LpS7 + DVdMQj2/YcHDT4xrDNBnXnviDO9G7am/9OE77kEbXrp7QPxvhjkicHNwy2rEflAA + zn075rtEERDHr8nRYiDh8eVrefSO7D+bdQ7gv+7GsYMsd2auJWi1dHOSfTr9HIF4 + HJhWXT9d2f8W+diRYXGh4X0wYiGg6na/soXc+vdtDYBzIxanRqjg8jCAeo1eOTk1 + EdTwhcTZlI0x5pvJ3H0+4hA2jtldVtmPM4OTB0cTrEWBad7XV6YgiyuII73Ve3I= + =jKHM + -----END PGP SIGNATURE----- + +signed commit + +signed commit message body +---- + +- verify with: `git verify-commit [-v]` (or `git show --show-signature`) + +---- +gpg: Signature made Wed Jun 15 10:58:57 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +tree eebfed94e75e7760540d1485c740902590a00332 +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465981137 +0000 +committer C O Mitter <committer@example.com> 1465981137 +0000 + +signed commit + +signed commit message body +---- + +== Mergetag signatures + +- created by: `git merge` on signed tag +- payload/embedding: the whole signed tag object is embedded into + the (merge) commit object as header entry `mergetag` +- example: merge of the signed tag `signedtag` as above + +---- +tree c7b1cff039a93f3600a1d18b82d26688668c7dea +parent c33429be94b5f2d3ee9b0adad223f877f174b05d +parent 04b871796dc0420f8e7561a895b52484b701d51a +author A U Thor <author@example.com> 1465982009 +0000 +committer C O Mitter <committer@example.com> 1465982009 +0000 +mergetag object 04b871796dc0420f8e7561a895b52484b701d51a + type commit + tag signedtag + tagger C O Mitter <committer@example.com> 1465981006 +0000 + + signed tag + + signed tag message body + -----BEGIN PGP SIGNATURE----- + Version: GnuPG v1 + + iQEcBAABAgAGBQJXYRhOAAoJEGEJLoW3InGJklkIAIcnhL7RwEb/+QeX9enkXhxn + rxfdqrvWd1K80sl2TOt8Bg/NYwrUBw/RWJ+sg/hhHp4WtvE1HDGHlkEz3y11Lkuh + 8tSxS3qKTxXUGozyPGuE90sJfExhZlW4knIQ1wt/yWqM+33E9pN4hzPqLwyrdods + q8FWEqPPUbSJXoMbRPw04S5jrLtZSsUWbRYjmJCHzlhSfFWW4eFd37uquIaLUBS0 + rkC3Jrx7420jkIpgFcTI2s60uhSQLzgcCwdA2ukSYIRnjg/zDkj8+3h/GaROJ72x + lZyI6HWixKJkWw8lE9aAOD9TmTW9sFJwcVAzmAuFX2kUreDUKMZduGcoRYGpD7E= + =jpXa + -----END PGP SIGNATURE----- + +Merge tag 'signedtag' into downstream + +signed tag + +signed tag message body + +# gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 +# gpg: Good signature from "Eris Discordia <discord@example.net>" +# gpg: WARNING: This key is not certified with a trusted signature! +# gpg: There is no indication that the signature belongs to the owner. +# Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- + +- verify with: verification is embedded in merge commit message by default, + alternatively with `git show --show-signature`: + +---- +commit 9863f0c76ff78712b6800e199a46aa56afbcbd49 +merged tag 'signedtag' +gpg: Signature made Wed Jun 15 10:56:46 2016 CEST using RSA key ID B7227189 +gpg: Good signature from "Eris Discordia <discord@example.net>" +gpg: WARNING: This key is not certified with a trusted signature! +gpg: There is no indication that the signature belongs to the owner. +Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +Merge: c33429b 04b8717 +Author: A U Thor <author@example.com> +Date: Wed Jun 15 09:13:29 2016 +0000 + + Merge tag 'signedtag' into downstream + + signed tag + + signed tag message body + + # gpg: Signature made Wed Jun 15 08:56:46 2016 UTC using RSA key ID B7227189 + # gpg: Good signature from "Eris Discordia <discord@example.net>" + # gpg: WARNING: This key is not certified with a trusted signature! + # gpg: There is no indication that the signature belongs to the owner. + # Primary key fingerprint: D4BE 2231 1AD3 131E 5EDA 29A4 6109 2E85 B722 7189 +---- diff --git a/Documentation/texi.xsl b/Documentation/texi.xsl new file mode 100644 index 0000000..0f8ff07 --- /dev/null +++ b/Documentation/texi.xsl @@ -0,0 +1,26 @@ +<!-- texi.xsl: + convert refsection elements into refsect elements that docbook2texi can + understand --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<xsl:output method="xml" + encoding="UTF-8" + doctype-public="-//OASIS//DTD DocBook XML V4.5//EN" + doctype-system="http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" /> + +<xsl:template match="//refsection"> + <xsl:variable name="element">refsect<xsl:value-of select="count(ancestor-or-self::refsection)" /></xsl:variable> + <xsl:element name="{$element}"> + <xsl:apply-templates select="@*|node()" /> + </xsl:element> +</xsl:template> + +<!-- Copy all other nodes through. --> +<xsl:template match="node()|@*"> + <xsl:copy> + <xsl:apply-templates select="@*|node()" /> + </xsl:copy> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/transfer-data-leaks.txt b/Documentation/transfer-data-leaks.txt new file mode 100644 index 0000000..914bacc --- /dev/null +++ b/Documentation/transfer-data-leaks.txt @@ -0,0 +1,30 @@ +SECURITY +-------- +The fetch and push protocols are not designed to prevent one side from +stealing data from the other repository that was not intended to be +shared. If you have private data that you need to protect from a malicious +peer, your best option is to store it in another repository. This applies +to both clients and servers. In particular, namespaces on a server are not +effective for read access control; you should only grant read access to a +namespace to clients that you would trust with read access to the entire +repository. + +The known attack vectors are as follows: + +. The victim sends "have" lines advertising the IDs of objects it has that + are not explicitly intended to be shared but can be used to optimize the + transfer if the peer also has them. The attacker chooses an object ID X + to steal and sends a ref to X, but isn't required to send the content of + X because the victim already has it. Now the victim believes that the + attacker has X, and it sends the content of X back to the attacker + later. (This attack is most straightforward for a client to perform on a + server, by creating a ref to X in the namespace the client has access + to and then fetching it. The most likely way for a server to perform it + on a client is to "merge" X into a public branch and hope that the user + does additional work on this branch and pushes it back to the server + without noticing the merge.) + +. As in #1, the attacker chooses an object ID X to steal. The victim sends + an object Y that the attacker already has, and the attacker falsely + claims to have X and not Y, so the victim sends Y as a delta against X. + The delta reveals regions of X that are similar to Y to the attacker. diff --git a/Documentation/urls.txt b/Documentation/urls.txt index 9ccb246..b05da95 100644 --- a/Documentation/urls.txt +++ b/Documentation/urls.txt @@ -7,9 +7,8 @@ Depending on the transport protocol, some of this information may be absent. Git supports ssh, git, http, and https protocols (in addition, ftp, -and ftps can be used for fetching and rsync can be used for fetching -and pushing, but these are inefficient and deprecated; do not use -them). +and ftps can be used for fetching, but this is inefficient and +deprecated; do not use it). The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks. @@ -20,7 +19,6 @@ The following syntaxes may be used with them: - git://host.xz{startsb}:port{endsb}/path/to/repo.git/ - http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ - ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/ -- rsync://host.xz/path/to/repo.git/ An alternative scp-like syntax may also be used with the ssh protocol: diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index 1c790ac..bc29298 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -2125,8 +2125,37 @@ Allowing web browsing of a repository ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The gitweb cgi script provides users an easy way to browse your -project's files and history without having to install Git; see the file -gitweb/INSTALL in the Git source tree for instructions on setting it up. +project's revisions, file contents and logs without having to install +Git. Features like RSS/Atom feeds and blame/annotation details may +optionally be enabled. + +The linkgit:git-instaweb[1] command provides a simple way to start +browsing the repository using gitweb. The default server when using +instaweb is lighttpd. + +See the file gitweb/INSTALL in the Git source tree and +linkgit:gitweb[1] for instructions on details setting up a permanent +installation with a CGI or Perl capable server. + +[[how-to-get-a-git-repository-with-minimal-history]] +How to get a Git repository with minimal history +------------------------------------------------ + +A <<def_shallow_clone,shallow clone>>, with its truncated +history, is useful when one is interested only in recent history +of a project and getting full history from the upstream is +expensive. + +A <<def_shallow_clone,shallow clone>> is created by specifying +the linkgit:git-clone[1] `--depth` switch. The depth can later be +changed with the linkgit:git-fetch[1] `--depth` switch, or full +history restored with `--unshallow`. + +Merging inside a <<def_shallow_clone,shallow clone>> will work as long +as a merge base is in the recent history. +Otherwise, it will be like merging unrelated histories and may +have to result in huge conflicts. This limitation may make such +a repository unsuitable to be used in merge based workflows. [[sharing-development-examples]] Examples @@ -4366,6 +4395,10 @@ itself! Git Glossary ============ +[[git-explained]] +Git explained +------------- + include::glossary-content.txt[] [[git-quick-start]] @@ -4607,6 +4640,10 @@ $ git gc Appendix B: Notes and todo list for this manual =============================================== +[[todo-list]] +Todo list +--------- + This is a work in progress. The basic requirements: @@ -4636,23 +4673,15 @@ Scan email archives for other stuff left out Scan man pages to see if any assume more background than this manual provides. -Simplify beginning by suggesting disconnected head instead of -temporary branch creation? - Add more good examples. Entire sections of just cookbook examples might be a good idea; maybe make an "advanced examples" section a standard end-of-chapter section? Include cross-references to the glossary, where appropriate. -Document shallow clones? See draft 1.5.0 release notes for some -documentation. - Add a section on working with other version control systems, including CVS, Subversion, and just imports of series of release tarballs. -More details on gitweb? - Write a chapter on using plumbing and writing scripts. Alternates, clone -reference, etc. |