diff options
Diffstat (limited to 'Documentation/git-send-email.txt')
| -rw-r--r-- | Documentation/git-send-email.txt | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt new file mode 100644 index 0000000..c283084 --- /dev/null +++ b/Documentation/git-send-email.txt @@ -0,0 +1,349 @@ +git-send-email(1) +================= + +NAME +---- +git-send-email - Send a collection of patches as emails + + +SYNOPSIS +-------- +'git send-email' [options] <file|directory|rev-list options>... + + +DESCRIPTION +----------- +Takes the patches given on the command line and emails them out. +Patches can be specified as files, directories (which will send all +files in the directory), or directly as a revision list. In the +last case, any format accepted by linkgit:git-format-patch[1] can +be passed to git send-email. + +The header of the email is configurable by command line options. If not +specified on the command line, the user will be prompted with a ReadLine +enabled interface to provide the necessary information. + +There are two formats accepted for patch files: + +1. mbox format files ++ +This is what linkgit:git-format-patch[1] generates. Most headers and MIME +formatting are ignored. + +2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' +script ++ +This format expects the first line of the file to contain the "Cc:" value +and the "Subject:" of the message as the second line. + + +OPTIONS +------- + +Composing +~~~~~~~~~ + +--annotate:: + Review and edit each patch you're about to send. See the + CONFIGURATION section for 'sendemail.multiedit'. + +--bcc=<address>:: + Specify a "Bcc:" value for each email. Default is the value of + 'sendemail.bcc'. ++ +The --bcc option must be repeated for each user you want on the bcc list. + +--cc=<address>:: + Specify a starting "Cc:" value for each email. + Default is the value of 'sendemail.cc'. ++ +The --cc option must be repeated for each user you want on the cc list. + +--compose:: + Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1]) + to edit an introductory message for the patch series. ++ +When '--compose' is used, git send-email will use the From, Subject, and +In-Reply-To headers specified in the message. If the body of the message +(what you type after the headers and a blank line) only contains blank +(or GIT: prefixed) lines the summary won't be sent, but From, Subject, +and In-Reply-To headers will be used unless they are removed. ++ +Missing From or In-Reply-To headers will be prompted for. ++ +See the CONFIGURATION section for 'sendemail.multiedit'. + +--from=<address>:: + Specify the sender of the emails. If not specified on the command line, + the value of the 'sendemail.from' configuration option is used. If + neither the command line option nor 'sendemail.from' are set, then the + user will be prompted for the value. The default for the prompt will be + the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not + set, as returned by "git var -l". + +--in-reply-to=<identifier>:: + Specify the contents of the first In-Reply-To header. + Subsequent emails will refer to the previous email + instead of this if --chain-reply-to is set. + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. + +--subject=<string>:: + Specify the initial subject of the email thread. + Only necessary if --compose is also set. If --compose + is not set, this will be prompted for. + +--to=<address>:: + Specify the primary recipient of the emails generated. Generally, this + will be the upstream maintainer of the project involved. Default is the + value of the 'sendemail.to' configuration value; if that is unspecified, + this will be prompted for. ++ +The --to option must be repeated for each user you want on the to list. + +--8bit-encoding=<encoding>:: + When encountering a non-ASCII message or subject that does not + declare its encoding, add headers/quoting to indicate it is + encoded in <encoding>. Default is the value of the + 'sendemail.assume8bitEncoding'; if that is unspecified, this + will be prompted for if any non-ASCII files are encountered. ++ +Note that no attempts whatsoever are made to validate the encoding. + + +Sending +~~~~~~~ + +--envelope-sender=<address>:: + Specify the envelope sender used to send the emails. + This is useful if your default address is not the address that is + subscribed to a list. In order to use the 'From' address, set the + value to "auto". If you use the sendmail binary, you must have + suitable privileges for the -f parameter. Default is the value of the + 'sendemail.envelopesender' configuration variable; if that is + unspecified, choosing the envelope sender is left to your MTA. + +--smtp-encryption=<encryption>:: + Specify the encryption to use, either 'ssl' or 'tls'. Any other + value reverts to plain SMTP. Default is the value of + 'sendemail.smtpencryption'. + +--smtp-domain=<FQDN>:: + Specifies the Fully Qualified Domain Name (FQDN) used in the + HELO/EHLO command to the SMTP server. Some servers require the + FQDN to match your IP address. If not set, git send-email attempts + to determine your FQDN automatically. Default is the value of + 'sendemail.smtpdomain'. + +--smtp-pass[=<password>]:: + Password for SMTP-AUTH. The argument is optional: If no + argument is specified, then the empty string is used as + the password. Default is the value of 'sendemail.smtppass', + however '--smtp-pass' always overrides this value. ++ +Furthermore, passwords need not be specified in configuration files +or on the command line. If a username has been specified (with +'--smtp-user' or a 'sendemail.smtpuser'), but no password has been +specified (with '--smtp-pass' or 'sendemail.smtppass'), then the +user is prompted for a password while the input is masked for privacy. + +--smtp-server=<host>:: + If set, specifies the outgoing SMTP server to use (e.g. + `smtp.example.com` or a raw IP address). Alternatively it can + specify a full pathname of a sendmail-like program instead; + the program must support the `-i` option. Default value can + be specified by the 'sendemail.smtpserver' configuration + option; the built-in default is `/usr/sbin/sendmail` or + `/usr/lib/sendmail` if such program is available, or + `localhost` otherwise. + +--smtp-server-port=<port>:: + Specifies a port different from the default port (SMTP + servers typically listen to smtp port 25, but may also listen to + submission port 587, or the common SSL smtp port 465); + symbolic port names (e.g. "submission" instead of 587) + are also accepted. The port can also be set with the + 'sendemail.smtpserverport' configuration variable. + +--smtp-ssl:: + Legacy alias for '--smtp-encryption ssl'. + +--smtp-user=<user>:: + Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; + if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), + then authentication is not attempted. + + +Automating +~~~~~~~~~~ + +--cc-cmd=<command>:: + Specify a command to execute once per patch file which + should generate patch file specific "Cc:" entries. + Output of this command must be single email address per line. + Default is the value of 'sendemail.cccmd' configuration value. + +--[no-]chain-reply-to:: + If this is set, each email will be sent as a reply to the previous + email sent. If disabled with "--no-chain-reply-to", all emails after + the first will be sent as replies to the first email sent. When using + this, it is recommended that the first file given be an overview of the + entire patch series. Disabled by default, but the 'sendemail.chainreplyto' + configuration variable can be used to enable it. + +--identity=<identity>:: + A configuration identity. When given, causes values in the + 'sendemail.<identity>' subsection to take precedence over + values in the 'sendemail' section. The default identity is + the value of 'sendemail.identity'. + +--[no-]signed-off-by-cc:: + If this is set, add emails found in Signed-off-by: or Cc: lines to the + cc list. Default is the value of 'sendemail.signedoffbycc' configuration + value; if that is unspecified, default to --signed-off-by-cc. + +--suppress-cc=<category>:: + Specify an additional category of recipients to suppress the + auto-cc of: ++ +-- +- 'author' will avoid including the patch author +- 'self' will avoid including the sender +- 'cc' will avoid including anyone mentioned in Cc lines in the patch header + except for self (use 'self' for that). +- 'bodycc' will avoid including anyone mentioned in Cc lines in the + patch body (commit message) except for self (use 'self' for that). +- 'sob' will avoid including anyone mentioned in Signed-off-by lines except + for self (use 'self' for that). +- 'cccmd' will avoid running the --cc-cmd. +- 'body' is equivalent to 'sob' + 'bodycc' +- 'all' will suppress all auto cc values. +-- ++ +Default is the value of 'sendemail.suppresscc' configuration value; if +that is unspecified, default to 'self' if --suppress-from is +specified, as well as 'body' if --no-signed-off-cc is specified. + +--[no-]suppress-from:: + If this is set, do not add the From: address to the cc: list. + Default is the value of 'sendemail.suppressfrom' configuration + value; if that is unspecified, default to --no-suppress-from. + +--[no-]thread:: + If this is set, the In-Reply-To and References headers will be + added to each email sent. Whether each mail refers to the + previous email (`deep` threading per 'git format-patch' + wording) or to the first email (`shallow` threading) is + governed by "--[no-]chain-reply-to". ++ +If disabled with "--no-thread", those headers will not be added +(unless specified with --in-reply-to). Default is the value of the +'sendemail.thread' configuration value; if that is unspecified, +default to --thread. ++ +It is up to the user to ensure that no In-Reply-To header already +exists when 'git send-email' is asked to add it (especially note that +'git format-patch' can be configured to do the threading itself). +Failure to do so may not produce the expected result in the +recipient's MUA. + + +Administering +~~~~~~~~~~~~~ + +--confirm=<mode>:: + Confirm just before sending: ++ +-- +- 'always' will always confirm before sending +- 'never' will never confirm before sending +- 'cc' will confirm before sending when send-email has automatically + added addresses from the patch to the Cc list +- 'compose' will confirm before sending the first message when using --compose. +- 'auto' is equivalent to 'cc' + 'compose' +-- ++ +Default is the value of 'sendemail.confirm' configuration value; if that +is unspecified, default to 'auto' unless any of the suppress options +have been specified, in which case default to 'compose'. + +--dry-run:: + Do everything except actually send the emails. + +--[no-]format-patch:: + When an argument may be understood either as a reference or as a file name, + choose to understand it as a format-patch argument ('--format-patch') + or as a file name ('--no-format-patch'). By default, when such a conflict + occurs, git send-email will fail. + +--quiet:: + Make git-send-email less verbose. One line per email should be + all that is output. + +--[no-]validate:: + Perform sanity checks on patches. + Currently, validation means the following: ++ +-- + * Warn of patches that contain lines longer than 998 characters; this + is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. +-- ++ +Default is the value of 'sendemail.validate'; if this is not set, +default to '--validate'. + + +CONFIGURATION +------------- + +sendemail.aliasesfile:: + To avoid typing long email addresses, point this to one or more + email aliases files. You must also supply 'sendemail.aliasfiletype'. + +sendemail.aliasfiletype:: + Format of the file(s) specified in sendemail.aliasesfile. Must be + one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'. + +sendemail.multiedit:: + If true (default), a single editor instance will be spawned to edit + files you have to edit (patches when '--annotate' is used, and the + summary when '--compose' is used). If false, files will be edited one + after the other, spawning a new editor each time. + +sendemail.confirm:: + Sets the default for whether to confirm before sending. Must be + one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm' + in the previous section for the meaning of these values. + + +Use gmail as the smtp server +---------------------------- + +Add the following section to the config file: + + [sendemail] + smtpencryption = tls + smtpserver = smtp.gmail.com + smtpuser = yourname@gmail.com + smtpserverport = 587 + +Note: the following perl modules are required + Net::SMTP::SSL, MIME::Base64 and Authen::SASL + + +Author +------ +Written by Ryan Anderson <ryan@michonline.com> + +git-send-email is originally based upon +send_lots_of_email.pl by Greg Kroah-Hartman. + + +Documentation +-------------- +Documentation by Ryan Anderson + + +GIT +--- +Part of the linkgit:git[1] suite |