summaryrefslogtreecommitdiff
path: root/Documentation/git-read-tree.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/git-read-tree.txt')
-rw-r--r--Documentation/git-read-tree.txt438
1 files changed, 438 insertions, 0 deletions
diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt
new file mode 100644
index 0000000..2e78da4
--- /dev/null
+++ b/Documentation/git-read-tree.txt
@@ -0,0 +1,438 @@
+git-read-tree(1)
+================
+
+NAME
+----
+git-read-tree - Reads tree information into the index
+
+
+SYNOPSIS
+--------
+'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>]
+ [-u [--exclude-per-directory=<gitignore>] | -i]]
+ [--index-output=<file>] [--no-sparse-checkout]
+ <tree-ish1> [<tree-ish2> [<tree-ish3>]]
+
+
+DESCRIPTION
+-----------
+Reads the tree information given by <tree-ish> into the index,
+but does not actually *update* any of the files it "caches". (see:
+linkgit:git-checkout-index[1])
+
+Optionally, it can merge a tree into the index, perform a
+fast-forward (i.e. 2-way) merge, or a 3-way merge, with the `-m`
+flag. When used with `-m`, the `-u` flag causes it to also update
+the files in the work tree with the result of the merge.
+
+Trivial merges are done by 'git read-tree' itself. Only conflicting paths
+will be in unmerged state when 'git read-tree' returns.
+
+OPTIONS
+-------
+-m::
+ Perform a merge, not just a read. The command will
+ refuse to run if your index file has unmerged entries,
+ indicating that you have not finished previous merge you
+ started.
+
+--reset::
+ Same as -m, except that unmerged entries are discarded
+ instead of failing.
+
+-u::
+ After a successful merge, update the files in the work
+ tree with the result of the merge.
+
+-i::
+ Usually a merge requires the index file as well as the
+ files in the working tree are up to date with the
+ current head commit, in order not to lose local
+ changes. This flag disables the check with the working
+ tree and is meant to be used when creating a merge of
+ trees that are not directly related to the current
+ working tree status into a temporary index file.
+
+-v::
+ Show the progress of checking files out.
+
+--trivial::
+ Restrict three-way merge by 'git read-tree' to happen
+ only if there is no file-level merging required, instead
+ of resolving merge for trivial cases and leaving
+ conflicting files unresolved in the index.
+
+--aggressive::
+ Usually a three-way merge by 'git read-tree' resolves
+ the merge for really trivial cases and leaves other
+ cases unresolved in the index, so that Porcelains can
+ implement different merge policies. This flag makes the
+ command to resolve a few more cases internally:
++
+* when one side removes a path and the other side leaves the path
+ unmodified. The resolution is to remove that path.
+* when both sides remove a path. The resolution is to remove that path.
+* when both sides adds a path identically. The resolution
+ is to add that path.
+
+--prefix=<prefix>/::
+ Keep the current index contents, and read the contents
+ of named tree-ish under directory at `<prefix>`. The
+ original index file cannot have anything at the path
+ `<prefix>` itself, and have nothing in `<prefix>/`
+ directory. Note that the `<prefix>/` value must end
+ with a slash.
+
+--exclude-per-directory=<gitignore>::
+ When running the command with `-u` and `-m` options, the
+ merge result may need to overwrite paths that are not
+ tracked in the current branch. The command usually
+ refuses to proceed with the merge to avoid losing such a
+ path. However this safety valve sometimes gets in the
+ way. For example, it often happens that the other
+ branch added a file that used to be a generated file in
+ your branch, and the safety valve triggers when you try
+ to switch to that branch after you ran `make` but before
+ running `make clean` to remove the generated file. This
+ option tells the command to read per-directory exclude
+ file (usually '.gitignore') and allows such an untracked
+ but explicitly ignored file to be overwritten.
+
+--index-output=<file>::
+ Instead of writing the results out to `$GIT_INDEX_FILE`,
+ write the resulting index in the named file. While the
+ command is operating, the original index file is locked
+ with the same mechanism as usual. The file must allow
+ to be rename(2)ed into from a temporary file that is
+ created next to the usual index file; typically this
+ means it needs to be on the same filesystem as the index
+ file itself, and you need write permission to the
+ directories the index file and index output file are
+ located in.
+
+--no-sparse-checkout::
+ Disable sparse checkout support even if `core.sparseCheckout`
+ is true.
+
+<tree-ish#>::
+ The id of the tree object(s) to be read/merged.
+
+
+Merging
+-------
+If `-m` is specified, 'git read-tree' can perform 3 kinds of
+merge, a single tree merge if only 1 tree is given, a
+fast-forward merge with 2 trees, or a 3-way merge if 3 trees are
+provided.
+
+
+Single Tree Merge
+~~~~~~~~~~~~~~~~~
+If only 1 tree is specified, 'git read-tree' operates as if the user did not
+specify `-m`, except that if the original index has an entry for a
+given pathname, and the contents of the path match with the tree
+being read, the stat info from the index is used. (In other words, the
+index's stat()s take precedence over the merged tree's).
+
+That means that if you do a `git read-tree -m <newtree>` followed by a
+`git checkout-index -f -u -a`, the 'git checkout-index' only checks out
+the stuff that really changed.
+
+This is used to avoid unnecessary false hits when 'git diff-files' is
+run after 'git read-tree'.
+
+
+Two Tree Merge
+~~~~~~~~~~~~~~
+
+Typically, this is invoked as `git read-tree -m $H $M`, where $H
+is the head commit of the current repository, and $M is the head
+of a foreign tree, which is simply ahead of $H (i.e. we are in a
+fast-forward situation).
+
+When two trees are specified, the user is telling 'git read-tree'
+the following:
+
+ 1. The current index and work tree is derived from $H, but
+ the user may have local changes in them since $H.
+
+ 2. The user wants to fast-forward to $M.
+
+In this case, the `git read-tree -m $H $M` command makes sure
+that no local change is lost as the result of this "merge".
+Here are the "carry forward" rules, where "I" denotes the index,
+"clean" means that index and work tree coincide, and "exists"/"nothing"
+refer to the presence of a path in the specified commit:
+
+ I H M Result
+ -------------------------------------------------------
+ 0 nothing nothing nothing (does not happen)
+ 1 nothing nothing exists use M
+ 2 nothing exists nothing remove path from index
+ 3 nothing exists exists, use M if "initial checkout",
+ H == M keep index otherwise
+ exists, fail
+ H != M
+
+ clean I==H I==M
+ ------------------
+ 4 yes N/A N/A nothing nothing keep index
+ 5 no N/A N/A nothing nothing keep index
+
+ 6 yes N/A yes nothing exists keep index
+ 7 no N/A yes nothing exists keep index
+ 8 yes N/A no nothing exists fail
+ 9 no N/A no nothing exists fail
+
+ 10 yes yes N/A exists nothing remove path from index
+ 11 no yes N/A exists nothing fail
+ 12 yes no N/A exists nothing fail
+ 13 no no N/A exists nothing fail
+
+ clean (H==M)
+ ------
+ 14 yes exists exists keep index
+ 15 no exists exists keep index
+
+ clean I==H I==M (H!=M)
+ ------------------
+ 16 yes no no exists exists fail
+ 17 no no no exists exists fail
+ 18 yes no yes exists exists keep index
+ 19 no no yes exists exists keep index
+ 20 yes yes no exists exists use M
+ 21 no yes no exists exists fail
+
+In all "keep index" cases, the index entry stays as in the
+original index file. If the entry is not up to date,
+'git read-tree' keeps the copy in the work tree intact when
+operating under the -u flag.
+
+When this form of 'git read-tree' returns successfully, you can
+see which of the "local changes" that you made were carried forward by running
+`git diff-index --cached $M`. Note that this does not
+necessarily match what `git diff-index --cached $H` would have
+produced before such a two tree merge. This is because of cases
+18 and 19 --- if you already had the changes in $M (e.g. maybe
+you picked it up via e-mail in a patch form), `git diff-index
+--cached $H` would have told you about the change before this
+merge, but it would not show in `git diff-index --cached $M`
+output after the two-tree merge.
+
+Case 3 is slightly tricky and needs explanation. The result from this
+rule logically should be to remove the path if the user staged the removal
+of the path and then switching to a new branch. That however will prevent
+the initial checkout from happening, so the rule is modified to use M (new
+tree) only when the content of the index is empty. Otherwise the removal
+of the path is kept as long as $H and $M are the same.
+
+3-Way Merge
+~~~~~~~~~~~
+Each "index" entry has two bits worth of "stage" state. stage 0 is the
+normal one, and is the only one you'd see in any kind of normal use.
+
+However, when you do 'git read-tree' with three trees, the "stage"
+starts out at 1.
+
+This means that you can do
+
+----------------
+$ git read-tree -m <tree1> <tree2> <tree3>
+----------------
+
+and you will end up with an index with all of the <tree1> entries in
+"stage1", all of the <tree2> entries in "stage2" and all of the
+<tree3> entries in "stage3". When performing a merge of another
+branch into the current branch, we use the common ancestor tree
+as <tree1>, the current branch head as <tree2>, and the other
+branch head as <tree3>.
+
+Furthermore, 'git read-tree' has special-case logic that says: if you see
+a file that matches in all respects in the following states, it
+"collapses" back to "stage0":
+
+ - stage 2 and 3 are the same; take one or the other (it makes no
+ difference - the same work has been done on our branch in
+ stage 2 and their branch in stage 3)
+
+ - stage 1 and stage 2 are the same and stage 3 is different; take
+ stage 3 (our branch in stage 2 did not do anything since the
+ ancestor in stage 1 while their branch in stage 3 worked on
+ it)
+
+ - stage 1 and stage 3 are the same and stage 2 is different take
+ stage 2 (we did something while they did nothing)
+
+The 'git write-tree' command refuses to write a nonsensical tree, and it
+will complain about unmerged entries if it sees a single entry that is not
+stage 0.
+
+OK, this all sounds like a collection of totally nonsensical rules,
+but it's actually exactly what you want in order to do a fast
+merge. The different stages represent the "result tree" (stage 0, aka
+"merged"), the original tree (stage 1, aka "orig"), and the two trees
+you are trying to merge (stage 2 and 3 respectively).
+
+The order of stages 1, 2 and 3 (hence the order of three
+<tree-ish> command line arguments) are significant when you
+start a 3-way merge with an index file that is already
+populated. Here is an outline of how the algorithm works:
+
+- if a file exists in identical format in all three trees, it will
+ automatically collapse to "merged" state by 'git read-tree'.
+
+- a file that has _any_ difference what-so-ever in the three trees
+ will stay as separate entries in the index. It's up to "porcelain
+ policy" to determine how to remove the non-0 stages, and insert a
+ merged version.
+
+- the index file saves and restores with all this information, so you
+ can merge things incrementally, but as long as it has entries in
+ stages 1/2/3 (i.e., "unmerged entries") you can't write the result. So
+ now the merge algorithm ends up being really simple:
+
+ * you walk the index in order, and ignore all entries of stage 0,
+ since they've already been done.
+
+ * if you find a "stage1", but no matching "stage2" or "stage3", you
+ know it's been removed from both trees (it only existed in the
+ original tree), and you remove that entry.
+
+ * if you find a matching "stage2" and "stage3" tree, you remove one
+ of them, and turn the other into a "stage0" entry. Remove any
+ matching "stage1" entry if it exists too. .. all the normal
+ trivial rules ..
+
+You would normally use 'git merge-index' with supplied
+'git merge-one-file' to do this last step. The script updates
+the files in the working tree as it merges each path and at the
+end of a successful merge.
+
+When you start a 3-way merge with an index file that is already
+populated, it is assumed that it represents the state of the
+files in your work tree, and you can even have files with
+changes unrecorded in the index file. It is further assumed
+that this state is "derived" from the stage 2 tree. The 3-way
+merge refuses to run if it finds an entry in the original index
+file that does not match stage 2.
+
+This is done to prevent you from losing your work-in-progress
+changes, and mixing your random changes in an unrelated merge
+commit. To illustrate, suppose you start from what has been
+committed last to your repository:
+
+----------------
+$ JC=`git rev-parse --verify "HEAD^0"`
+$ git checkout-index -f -u -a $JC
+----------------
+
+You do random edits, without running 'git update-index'. And then
+you notice that the tip of your "upstream" tree has advanced
+since you pulled from him:
+
+----------------
+$ git fetch git://.... linus
+$ LT=`cat .git/FETCH_HEAD`
+----------------
+
+Your work tree is still based on your HEAD ($JC), but you have
+some edits since. Three-way merge makes sure that you have not
+added or modified index entries since $JC, and if you haven't,
+then does the right thing. So with the following sequence:
+
+----------------
+$ git read-tree -m -u `git merge-base $JC $LT` $JC $LT
+$ git merge-index git-merge-one-file -a
+$ echo "Merge with Linus" | \
+ git commit-tree `git write-tree` -p $JC -p $LT
+----------------
+
+what you would commit is a pure merge between $JC and $LT without
+your work-in-progress changes, and your work tree would be
+updated to the result of the merge.
+
+However, if you have local changes in the working tree that
+would be overwritten by this merge, 'git read-tree' will refuse
+to run to prevent your changes from being lost.
+
+In other words, there is no need to worry about what exists only
+in the working tree. When you have local changes in a part of
+the project that is not involved in the merge, your changes do
+not interfere with the merge, and are kept intact. When they
+*do* interfere, the merge does not even start ('git read-tree'
+complains loudly and fails without modifying anything). In such
+a case, you can simply continue doing what you were in the
+middle of doing, and when your working tree is ready (i.e. you
+have finished your work-in-progress), attempt the merge again.
+
+
+Sparse checkout
+---------------
+
+"Sparse checkout" allows to sparsely populate working directory.
+It uses skip-worktree bit (see linkgit:git-update-index[1]) to tell
+Git whether a file on working directory is worth looking at.
+
+"git read-tree" and other merge-based commands ("git merge", "git
+checkout"...) can help maintaining skip-worktree bitmap and working
+directory update. `$GIT_DIR/info/sparse-checkout` is used to
+define the skip-worktree reference bitmap. When "git read-tree" needs
+to update working directory, it will reset skip-worktree bit in index
+based on this file, which uses the same syntax as .gitignore files.
+If an entry matches a pattern in this file, skip-worktree will be
+set on that entry. Otherwise, skip-worktree will be unset.
+
+Then it compares the new skip-worktree value with the previous one. If
+skip-worktree turns from unset to set, it will add the corresponding
+file back. If it turns from set to unset, that file will be removed.
+
+While `$GIT_DIR/info/sparse-checkout` is usually used to specify what
+files are in. You can also specify what files are _not_ in, using
+negate patterns. For example, to remove file "unwanted":
+
+----------------
+*
+!unwanted
+----------------
+
+Another tricky thing is fully repopulating working directory when you
+no longer want sparse checkout. You cannot just disable "sparse
+checkout" because skip-worktree are still in the index and you working
+directory is still sparsely populated. You should re-populate working
+directory with the `$GIT_DIR/info/sparse-checkout` file content as
+follows:
+
+----------------
+*
+----------------
+
+Then you can disable sparse checkout. Sparse checkout support in "git
+read-tree" and similar commands is disabled by default. You need to
+turn `core.sparseCheckout` on in order to have sparse checkout
+support.
+
+
+BUGS
+----
+In order to match a directory with $GIT_DIR/info/sparse-checkout,
+trailing slash must be used. The form without trailing slash, while
+works with .gitignore, does not work with sparse checkout.
+
+
+SEE ALSO
+--------
+linkgit:git-write-tree[1]; linkgit:git-ls-files[1];
+linkgit:gitignore[5]
+
+
+Author
+------
+Written by Linus Torvalds <torvalds@osdl.org>
+
+Documentation
+--------------
+Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
+
+GIT
+---
+Part of the linkgit:git[1] suite