diff options
Diffstat (limited to 'Documentation/RelNotes')
33 files changed, 3108 insertions, 39 deletions
diff --git a/Documentation/RelNotes/1.7.10.1.txt b/Documentation/RelNotes/1.7.10.1.txt index 806a965..be68524 100644 --- a/Documentation/RelNotes/1.7.10.1.txt +++ b/Documentation/RelNotes/1.7.10.1.txt @@ -14,7 +14,7 @@ Fixes since v1.7.10 not exclude them and tried to apply funny patches only to fail. * "git blame" started missing quite a few changes from the origin - since we stopped using the diff minimalization by default in v1.7.2 + since we stopped using the diff minimization by default in v1.7.2 era. * When PATH contains an unreadable directory, alias expansion code diff --git a/Documentation/RelNotes/1.7.11.2.txt b/Documentation/RelNotes/1.7.11.2.txt index a0d24d1..f0cfd02 100644 --- a/Documentation/RelNotes/1.7.11.2.txt +++ b/Documentation/RelNotes/1.7.11.2.txt @@ -31,7 +31,7 @@ Fixes since v1.7.11.1 * "git diff --no-index" did not work with pagers correctly. * "git diff COPYING HEAD:COPYING" gave a nonsense error message that - claimed that the treeish HEAD did not have COPYING in it. + claimed that the tree-ish HEAD did not have COPYING in it. * When "git log" gets "--simplify-merges/by-decoration" together with "--first-parent", the combination of these options makes the diff --git a/Documentation/RelNotes/1.7.5.4.txt b/Documentation/RelNotes/1.7.5.4.txt index cf3f455..7796df3 100644 --- a/Documentation/RelNotes/1.7.5.4.txt +++ b/Documentation/RelNotes/1.7.5.4.txt @@ -5,7 +5,7 @@ Fixes since v1.7.5.3 -------------------- * The single-key mode of "git add -p" was easily fooled into thinking - that it was told to add everthing ('a') when up-arrow was pressed by + that it was told to add everything ('a') when up-arrow was pressed by mistake. * Setting a git command that uses custom configuration via "-c var=val" diff --git a/Documentation/RelNotes/1.7.8.2.txt b/Documentation/RelNotes/1.7.8.2.txt index e74f4ef..b9c66aa 100644 --- a/Documentation/RelNotes/1.7.8.2.txt +++ b/Documentation/RelNotes/1.7.8.2.txt @@ -12,11 +12,11 @@ Fixes since v1.7.8.1 * The configuration file parser used for sizes (e.g. bigFileThreshold) did not correctly interpret 'g' suffix. - * The replacement implemention for snprintf used on platforms with + * The replacement implementation for snprintf used on platforms with native snprintf that is broken did not use va_copy correctly. * LF-to-CRLF streaming filter replaced all LF with CRLF, which might - be techinically correct but not friendly to people who are trying + be technically correct but not friendly to people who are trying to recover from earlier mistakes of using CRLF in the repository data in the first place. It now refrains from doing so for LF that follows a CR. diff --git a/Documentation/RelNotes/1.7.8.txt b/Documentation/RelNotes/1.7.8.txt index b4d90bb..2493113 100644 --- a/Documentation/RelNotes/1.7.8.txt +++ b/Documentation/RelNotes/1.7.8.txt @@ -9,7 +9,7 @@ Updates since v1.7.7 * Updates to bash completion scripts. * The build procedure has been taught to take advantage of computed - dependency automatically when the complier supports it. + dependency automatically when the compiler supports it. * The date parser now accepts timezone designators that lack minutes part and also has a colon between "hh:mm". @@ -31,7 +31,7 @@ Updates since v1.7.7 * Variants of "git cherry-pick" and "git revert" that take multiple commits learned to "--continue" and "--abort". - * "git daemon" gives more human readble error messages to clients + * "git daemon" gives more human readable error messages to clients using ERR packets when appropriate. * Errors at the network layer is logged by "git daemon". diff --git a/Documentation/RelNotes/1.8.1.1.txt b/Documentation/RelNotes/1.8.1.1.txt new file mode 100644 index 0000000..6cde07b --- /dev/null +++ b/Documentation/RelNotes/1.8.1.1.txt @@ -0,0 +1,87 @@ +Git 1.8.1.1 Release Notes +========================= + +Fixes since v1.8.1 +------------------ + + * The attribute mechanism didn't allow limiting attributes to be + applied to only a single directory itself with "path/" like the + exclude mechanism does. + + * When attempting to read the XDG-style $HOME/.config/git/config and + finding that $HOME/.config/git is a file, we gave a wrong error + message, instead of treating the case as "a custom config file does + not exist there" and moving on. + + * After failing to create a temporary file using mkstemp(), failing + pathname was not reported correctly on some platforms. + + * http transport was wrong to ask for the username when the + authentication is done by certificate identity. + + * The behaviour visible to the end users was confusing, when they + attempt to kill a process spawned in the editor that was in turn + launched by Git with SIGINT (or SIGQUIT), as Git would catch that + signal and die. We ignore these signals now. + + * A child process that was killed by a signal (e.g. SIGINT) was + reported in an inconsistent way depending on how the process was + spawned by us, with or without a shell in between. + + * After "git add -N" and then writing a tree object out of the + index, the cache-tree data structure got corrupted. + + * "git apply" misbehaved when fixing whitespace breakages by removing + excess trailing blank lines in some corner cases. + + * A tar archive created by "git archive" recorded a directory in a + way that made NetBSD's implementation of "tar" sometimes unhappy. + + * When "git clone --separate-git-dir=$over_there" is interrupted, it + failed to remove the real location of the $GIT_DIR it created. + This was most visible when interrupting a submodule update. + + * "git fetch --mirror" and fetch that uses other forms of refspec + with wildcard used to attempt to update a symbolic ref that match + the wildcard on the receiving end, which made little sense (the + real ref that is pointed at by the symbolic ref would be updated + anyway). Symbolic refs no longer are affected by such a fetch. + + * The "log --graph" codepath fell into infinite loop in some + corner cases. + + * "git merge" started calling prepare-commit-msg hook like "git + commit" does some time ago, but forgot to pay attention to the exit + status of the hook. + + * "git pack-refs" that ran in parallel to another process that + created new refs had a race that can lose new ones. + + * When a line to be wrapped has a solid run of non space characters + whose length exactly is the wrap width, "git shortlog -w" failed + to add a newline after such a line. + + * The way "git svn" asked for password using SSH_ASKPASS and + GIT_ASKPASS was not in line with the rest of the system. + + * "gitweb", when sorting by age to show repositories with new + activities first, used to sort repositories with absolutely + nothing in it early, which was not very useful. + + * "gitweb", when sorting by age to show repositories with new + activities first, used to sort repositories with absolutely + nothing in it early, which was not very useful. + + * When autoconf is used, any build on a different commit always ran + "config.status --recheck" even when unnecessary. + + * Some scripted programs written in Python did not get updated when + PYTHON_PATH changed. + + * We have been carrying a translated and long-unmaintained copy of an + old version of the tutorial; removed. + + * Portability issues in many self-test scripts have been addressed. + + +Also contains other minor fixes and documentation updates. diff --git a/Documentation/RelNotes/1.8.1.2.txt b/Documentation/RelNotes/1.8.1.2.txt new file mode 100644 index 0000000..5ab7b18 --- /dev/null +++ b/Documentation/RelNotes/1.8.1.2.txt @@ -0,0 +1,25 @@ +Git 1.8.1.2 Release Notes +========================= + +Fixes since v1.8.1.1 +-------------------- + + * An element on GIT_CEILING_DIRECTORIES list that does not name the + real path to a directory (i.e. a symbolic link) could have caused + the GIT_DIR discovery logic to escape the ceiling. + + * Command line completion for "tcsh" emitted an unwanted space + after completing a single directory name. + + * Command line completion leaked an unnecessary error message while + looking for possible matches with paths in <tree-ish>. + + * "git archive" did not record uncompressed size in the header when + streaming a zip archive, which confused some implementations of unzip. + + * When users spelled "cc:" in lowercase in the fake "header" in the + trailer part, "git send-email" failed to pick up the addresses from + there. As e-mail headers field names are case insensitive, this + script should follow suit and treat "cc:" and "Cc:" the same way. + +Also contains various documentation fixes. diff --git a/Documentation/RelNotes/1.8.1.3.txt b/Documentation/RelNotes/1.8.1.3.txt new file mode 100644 index 0000000..681cb35 --- /dev/null +++ b/Documentation/RelNotes/1.8.1.3.txt @@ -0,0 +1,47 @@ +Git 1.8.1.3 Release Notes +========================= + +Fixes since v1.8.1.2 +-------------------- + + * The attribute mechanism didn't allow limiting attributes to be + applied to only a single directory itself with "path/" like the + exclude mechanism does. The fix for this in 1.8.1.2 had + performance degradations. + + * Command line completion code was inadvertently made incompatible with + older versions of bash by using a newer array notation. + + * Scripts to test bash completion was inherently flaky as it was + affected by whatever random things the user may have on $PATH. + + * A fix was added to the build procedure to work around buggy + versions of ccache broke the auto-generation of dependencies, which + unfortunately is still relevant because some people use ancient + distros. + + * We used to stuff "user@" and then append what we read from + /etc/mailname to come up with a default e-mail ident, but a bug + lost the "user@" part. + + * "git am" did not parse datestamp correctly from Hg generated patch, + when it is run in a locale outside C (or en). + + * Attempt to "branch --edit-description" an existing branch, while + being on a detached HEAD, errored out. + + * "git cherry-pick" did not replay a root commit to an unborn branch. + + * We forgot to close the file descriptor reading from "gpg" output, + killing "git log --show-signature" on a long history. + + * "git rebase --preserve-merges" lost empty merges in recent versions + of Git. + + * Rebasing the history of superproject with change in the submodule + has been broken since v1.7.12. + + * A failure to push due to non-ff while on an unborn branch + dereferenced a NULL pointer when showing an error message. + +Also contains various documentation fixes. diff --git a/Documentation/RelNotes/1.8.1.4.txt b/Documentation/RelNotes/1.8.1.4.txt new file mode 100644 index 0000000..22af1d1 --- /dev/null +++ b/Documentation/RelNotes/1.8.1.4.txt @@ -0,0 +1,11 @@ +Git 1.8.1.4 Release Notes +========================= + +Fixes since v1.8.1.3 +-------------------- + + * "git imap-send" talking over imaps:// did make sure it received a + valid certificate from the other end, but did not check if the + certificate matched the host it thought it was talking to. + +Also contains various documentation fixes. diff --git a/Documentation/RelNotes/1.8.1.5.txt b/Documentation/RelNotes/1.8.1.5.txt new file mode 100644 index 0000000..efa68ae --- /dev/null +++ b/Documentation/RelNotes/1.8.1.5.txt @@ -0,0 +1,47 @@ +Git 1.8.1.5 Release Notes +========================= + +Fixes since v1.8.1.4 +-------------------- + + * Given a string with a multi-byte character that begins with '-' on + the command line where an option is expected, the option parser + used just one byte of the unknown letter when reporting an error. + + * In v1.8.1, the attribute parser was tightened too restrictive to + error out upon seeing an entry that begins with an ! (exclamation), + which may confuse users to expect a "negative match", which does + not exist. This has been demoted to a warning; such an entry is + still ignored. + + * "git apply --summary" has been taught to make sure the similarity + value shown in its output is sensible, even when the input had a + bogus value. + + * "git clean" showed what it was going to do, but sometimes ended + up finding that it was not allowed to do so, which resulted in a + confusing output (e.g. after saying that it will remove an + untracked directory, it found an embedded git repository there + which it is not allowed to remove). It now performs the actions + and then reports the outcome more faithfully. + + * "git clone" used to allow --bare and --separate-git-dir=$there + options at the same time, which was nonsensical. + + * "git cvsimport" mishandled timestamps at DST boundary. + + * We used to have an arbitrary 32 limit for combined diff input, + resulting in incorrect number of leading colons shown when showing + the "--raw --cc" output. + + * The smart HTTP clients forgot to verify the content-type that comes + back from the server side to make sure that the request is being + handled properly. + + * "git help remote-helpers" failed to find the documentation. + + * "gitweb" pages served over HTTPS, when configured to show picon or + gravatar, referred to these external resources to be fetched via + HTTP, resulting in mixed contents warning in browsers. + +Also contains various documentation fixes. diff --git a/Documentation/RelNotes/1.8.1.6.txt b/Documentation/RelNotes/1.8.1.6.txt new file mode 100644 index 0000000..c15cf2e --- /dev/null +++ b/Documentation/RelNotes/1.8.1.6.txt @@ -0,0 +1,39 @@ +Git 1.8.1.6 Release Notes +========================= + +Fixes since v1.8.1.5 +-------------------- + + * An earlier change to the attribute system introduced at v1.8.1.2 by + mistake stopped a pattern "dir" (without trailing slash) from + matching a directory "dir" (it only wanted to allow pattern "dir/" + to also match). + + * The code to keep track of what directory names are known to Git on + platforms with case insensitive filesystems can get confused upon a + hash collision between these pathnames and looped forever. + + * When the "--prefix" option is used to "checkout-index", the code + did not pick the correct output filter based on the attribute + setting. + + * Annotated tags outside refs/tags/ hierarchy were not advertised + correctly to the ls-remote and fetch with recent version of Git. + + * The logic used by "git diff -M --stat" to shorten the names of + files before and after a rename did not work correctly when the + common prefix and suffix between the two filenames overlapped. + + * "git update-index -h" did not do the usual "-h(elp)" thing. + + * perl/Git.pm::cat_blob slurped everything in core only to write it + out to a file descriptor, which was not a very smart thing to do. + + * The SSL peer verification done by "git imap-send" did not ask for + Server Name Indication (RFC 4366), failing to connect SSL/TLS + sites that serve multiple hostnames on a single IP. + + * "git bundle verify" did not say "records a complete history" for a + bundle that does not have any prerequisites. + +Also contains various documentation fixes. diff --git a/Documentation/RelNotes/1.8.2.1.txt b/Documentation/RelNotes/1.8.2.1.txt new file mode 100644 index 0000000..769a6fc --- /dev/null +++ b/Documentation/RelNotes/1.8.2.1.txt @@ -0,0 +1,115 @@ +Git v1.8.2.1 Release Notes +========================== + +Fixes since v1.8.2 +------------------ + + * An earlier change to the attribute system introduced at v1.8.1.2 by + mistake stopped a pattern "dir" (without trailing slash) from + matching a directory "dir" (it only wanted to allow pattern "dir/" + to also match). + + * Verification of signed tags were not done correctly when not in C + or en/US locale. + + * 'git commit -m "$msg"' used to add an extra newline even when + $msg already ended with one. + + * The "--match=<pattern>" option of "git describe", when used with + "--all" to allow refs that are not annotated tags to be used as a + base of description, did not restrict the output from the command + to those that match the given pattern. + + * An aliased command spawned from a bare repository that does not say + it is bare with "core.bare = yes" is treated as non-bare by mistake. + + * When "format-patch" quoted a non-ascii strings on the header files, + it incorrectly applied rfc2047 and chopped a single character in + the middle of it. + + * "git archive" reports a failure when asked to create an archive out + of an empty tree. It would be more intuitive to give an empty + archive back in such a case. + + * "git tag -f <tag>" always said "Updated tag '<tag>'" even when + creating a new tag (i.e. not overwriting nor updating). + + * "git cmd -- ':(top'" was not diagnosed as an invalid syntax, and + instead the parser kept reading beyond the end of the string. + + * Annotated tags outside refs/tags/ hierarchy were not advertised + correctly to the ls-remote and fetch with recent version of Git. + + * The code to keep track of what directory names are known to Git on + platforms with case insensitive filesystems can get confused upon a + hash collision between these pathnames and looped forever. + + * The logic used by "git diff -M --stat" to shorten the names of + files before and after a rename did not work correctly when the + common prefix and suffix between the two filenames overlapped. + + * "git submodule update", when recursed into sub-submodules, did not + accumulate the prefix paths. + + * "git am $maildir/" applied messages in an unexpected order; sort + filenames read from the maildir/ in a way that is more likely to + sort messages in the order the writing MUA meant to, by sorting + numeric segment in numeric order and non-numeric segment in + alphabetical order. + + * When export-subst is used, "zip" output recorded incorrect + size of the file. + + * Some platforms and users spell UTF-8 differently; retry with the + most official "UTF-8" when the system does not understand the + user-supplied encoding name that are the common alternative + spellings of UTF-8. + + * "git branch" did not bother to check nonsense command line + parameters and issue errors in many cases. + + * "git update-index -h" did not do the usual "-h(elp)" thing. + + * perl/Git.pm::cat_blob slurped everything in core only to write it + out to a file descriptor, which was not a very smart thing to do. + + * The SSL peer verification done by "git imap-send" did not ask for + Server Name Indication (RFC 4366), failing to connect SSL/TLS + sites that serve multiple hostnames on a single IP. + + * "git index-pack" had a buffer-overflow while preparing an + informational message when the translated version of it was too + long. + + * Clarify in the documentation "what" gets pushed to "where" when the + command line to "git push" does not say these explicitly. + + * In "git reflog expire", REACHABLE bit was not cleared from the + correct objects. + + * The "--color=<when>" argument to the commands in the diff family + was described poorly. + + * The arguments given to pre-rebase hook were not documented. + + * The v4 index format was not documented. + + * The "--match=<pattern>" argument "git describe" takes uses glob + pattern but it wasn't obvious from the documentation. + + * Some sources failed to compile on systems that lack NI_MAXHOST in + their system header (e.g. z/OS). + + * Add an example use of "--env-filter" in "filter-branch" + documentation. + + * "git bundle verify" did not say "records a complete history" for a + bundle that does not have any prerequisites. + + * In the v1.8.0 era, we changed symbols that do not have to be global + to file scope static, but a few functions in graph.c were used by + CGit from sideways bypassing the entry points of the API the + in-tree users use. + + * "git merge-tree" had a typo in the logic to detect d/f conflicts, + which caused it to segfault in some cases. diff --git a/Documentation/RelNotes/1.8.2.2.txt b/Documentation/RelNotes/1.8.2.2.txt new file mode 100644 index 0000000..708df1a --- /dev/null +++ b/Documentation/RelNotes/1.8.2.2.txt @@ -0,0 +1,61 @@ +Git v1.8.2.2 Release Notes +========================== + +Fixes since v1.8.2.1 +-------------------- + + * Zsh completion forgot that '%' character used to signal untracked + files needs to be escaped with another '%'. + + * A commit object whose author or committer ident are malformed + crashed some code that trusted that a name, an email and an + timestamp can always be found in it. + + * The new core.commentchar configuration was not applied to a few + places. + + * "git pull --rebase" did not pass "-v/-q" options to underlying + "git rebase". + + * When receive-pack detects error in the pack header it received in + order to decide which of unpack-objects or index-pack to run, it + returned without closing the error stream, which led to a hang + sideband thread. + + * "git diff --diff-algorithm=algo" was understood by the command line + parser, but "git diff --diff-algorithm algo" was not. + + * "git log -S/-G" started paying attention to textconv filter, but + there was no way to disable this. Make it honor --no-textconv + option. + + * "git merge $(git rev-parse v1.8.2)" behaved quite differently from + "git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did + not pay much attention to the annotated tag payload. Make the code + notice the type of the tag object, in addition to the dwim_ref() + based classification the current code uses (i.e. the name appears + in refs/tags/) to decide when to special case merging of tags. + + * "git cherry-pick" and "git revert" can take more than one commit + on the command line these days, but it was not mentioned on the usage + text. + + * Perl scripts like "git-svn" closed (not redirecting to /dev/null) + the standard error stream, which is not a very smart thing to do. + Later open may return file descriptor #2 for unrelated purpose, and + error reporting code may write into them. + + * "git apply --whitespace=fix" was not prepared to see a line getting + longer after fixing whitespaces (e.g. tab-in-indent aka Python). + + * "git diff/log --cc" did not work well with options that ignore + whitespace changes. + + * Documentation on setting up a http server that requires + authentication only on the push but not fetch has been clarified. + + * A few bugfixes to "git rerere" working on corner case merge + conflicts have been applied. + + * "git bundle" did not like a bundle created using a commit without + any message as its one of the prerequisites. diff --git a/Documentation/RelNotes/1.8.2.3.txt b/Documentation/RelNotes/1.8.2.3.txt new file mode 100644 index 0000000..6139482 --- /dev/null +++ b/Documentation/RelNotes/1.8.2.3.txt @@ -0,0 +1,19 @@ +Git v1.8.2.3 Release Notes +========================== + +Fixes since v1.8.2.2 +-------------------- + + * "rev-list --stdin" and friends kept bogus pointers into the input + buffer around as human readable object names. This was not a + huge problem but was exposed by a new change that uses these + names in error output. + + * When "git difftool" drove "kdiff3", it mistakenly passed --auto + option that was meant while resolving merge conflicts. + + * "git remote add" command did not diagnose extra command line + arguments as an error and silently ignored them. + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.2.txt b/Documentation/RelNotes/1.8.2.txt index 6c85bf4..fc606ae 100644 --- a/Documentation/RelNotes/1.8.2.txt +++ b/Documentation/RelNotes/1.8.2.txt @@ -1,19 +1,51 @@ Git v1.8.2 Release Notes ======================== -Backward compatibility notes ----------------------------- +Backward compatibility notes (this release) +------------------------------------------- -In the upcoming major release (tentatively called 1.8.2), we will -change the behavior of the "git push" command. +"git push $there tag v1.2.3" used to allow replacing a tag v1.2.3 +that already exists in the repository $there, if the rewritten tag +you are pushing points at a commit that is a descendant of a commit +that the old tag v1.2.3 points at. This was found to be error prone +and starting with this release, any attempt to update an existing +ref under refs/tags/ hierarchy will fail, without "--force". + +When "git add -u" and "git add -A" that does not specify what paths +to add on the command line is run from inside a subdirectory, the +scope of the operation has always been limited to the subdirectory. +Many users found this counter-intuitive, given that "git commit -a" +and other commands operate on the entire tree regardless of where you +are. In this release, these commands give a warning message that +suggests the users to use "git add -u/-A ." when they want to limit +the scope to the current directory; doing so will squelch the message, +while training their fingers. + + +Backward compatibility notes (for Git 2.0) +------------------------------------------ When "git push [$there]" does not say what to push, we have used the traditional "matching" semantics so far (all your branches were sent to the remote as long as there already are branches of the same name -over there). We will use the "simple" semantics that pushes the -current branch to the branch with the same name, only when the current -branch is set to integrate with that remote branch. There is a user -preference configuration variable "push.default" to change this. +over there). In Git 2.0, the default will change to the "simple" +semantics that pushes the current branch to the branch with the same +name, only when the current branch is set to integrate with that +remote branch. There is a user preference configuration variable +"push.default" to change this. If you are an old-timer who is used +to the "matching" semantics, you can set it to "matching" to keep the +traditional behaviour. If you want to live in the future early, +you can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" and "git add -A", that does not specify what paths +to add on the command line is run from inside a subdirectory, these +commands will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. Because there will be no +mechanism to make "git add -u" behave as if "git add -u .", it is +important for those who are used to "git add -u" (without pathspec) +updating the index only for paths in the current subdirectory to start +training their fingers to explicitly say "git add -u ." when they mean +it before Git 2.0 comes. Updates since v1.8.1 @@ -26,13 +58,210 @@ UI, Workflows & Features * Output from the tests is coloured using "green is okay, yellow is questionable, red is bad and blue is informative" scheme. + * Mention of "GIT/Git/git" in the documentation have been updated to + be more uniform and consistent. The name of the system and the + concept it embodies is "Git"; the command the users type is "git". + All-caps "GIT" was merely a way to imitate "Git" typeset in small + caps in our ASCII text only documentation and to be avoided. + + * The completion script (in contrib/completion) used to let the + default completer to suggest pathnames, which gave too many + irrelevant choices (e.g. "git add" would not want to add an + unmodified path). It learnt to use a more git-aware logic to + enumerate only relevant ones. + + * In bare repositories, "git shortlog" and other commands now read + mailmap files from the tip of the history, to help running these + tools in server settings. + + * Color specifiers, e.g. "%C(blue)Hello%C(reset)", used in the + "--format=" option of "git log" and friends can be disabled when + the output is not sent to a terminal by prefixing them with + "auto,", e.g. "%C(auto,blue)Hello%C(auto,reset)". + + * Scripts can ask Git that wildcard patterns in pathspecs they give do + not have any significance, i.e. take them as literal strings. + + * The patterns in .gitignore and .gitattributes files can have **/, + as a pattern that matches 0 or more levels of subdirectory. + E.g. "foo/**/bar" matches "bar" in "foo" itself or in a + subdirectory of "foo". + + * When giving arguments without "--" disambiguation, object names + that come earlier on the command line must not be interpretable as + pathspecs and pathspecs that come later on the command line must + not be interpretable as object names. This disambiguation rule has + been tweaked so that ":/" (no other string before or after) is + always interpreted as a pathspec; "git cmd -- :/" is no longer + needed, you can just say "git cmd :/". + + * Various "hint" lines Git gives when it asks the user to edit + messages in the editor are commented out with '#' by default. The + core.commentchar configuration variable can be used to customize + this '#' to a different character. + + * "git add -u" and "git add -A" without pathspec issues warning to + make users aware that they are only operating on paths inside the + subdirectory they are in. Use ":/" (everything from the top) or + "." (everything from the $cwd) to disambiguate. + + * "git blame" (and "git diff") learned the "--no-follow" option. + + * "git branch" now rejects some nonsense combinations of command line + arguments (e.g. giving more than one branch name to rename) with + more case-specific error messages. + + * "git check-ignore" command to help debugging .gitignore files has + been added. + + * "git cherry-pick" can be used to replay a root commit to an unborn + branch. + + * "git commit" can be told to use --cleanup=whitespace by setting the + configuration variable commit.cleanup to 'whitespace'. + + * "git diff" and other Porcelain commands can be told to use a + non-standard algorithm by setting diff.algorithm configuration + variable. + + * "git fetch --mirror" and fetch that uses other forms of refspec + with wildcard used to attempt to update a symbolic ref that match + the wildcard on the receiving end, which made little sense (the + real ref that is pointed at by the symbolic ref would be updated + anyway). Symbolic refs no longer are affected by such a fetch. + + * "git format-patch" now detects more cases in which a whole branch + is being exported, and uses the description for the branch, when + asked to write a cover letter for the series. + + * "git format-patch" learned "-v $count" option, and prepends a + string "v$count-" to the names of its output files, and also + automatically sets the subject prefix to "PATCH v$count". This + allows patches from rerolled series to be stored under different + names and makes it easier to reuse cover letter messages. + + * "git log" and friends can be told with --use-mailmap option to + rewrite the names and email addresses of people using the mailmap + mechanism. + + * "git log --cc --graph" now shows the combined diff output with the + ancestry graph. + + * "git log --grep=<pattern>" honors i18n.logoutputencoding to look + for the pattern after fixing the log message to the specified + encoding. + + * "git mergetool" and "git difftool" learned to list the available + tool backends in a more consistent manner. + + * "git mergetool" is aware of TortoiseGitMerge now and uses it over + TortoiseMerge when available. + + * "git push" now requires "-f" to update a tag, even if it is a + fast-forward, as tags are meant to be fixed points. + + * Error messages from "git push" when it stops to prevent remote refs + from getting overwritten by mistake have been improved to explain + various situations separately. + + * "git push" will stop without doing anything if the new "pre-push" + hook exists and exits with a failure. + + * When "git rebase" fails to generate patches to be applied (e.g. due + to oom), it failed to detect the failure and instead behaved as if + there were nothing to do. A workaround to use a temporary file has + been applied, but we probably would want to revisit this later, as + it hurts the common case of not failing at all. + + * Input and preconditions to "git reset" has been loosened where + appropriate. "git reset $fromtree Makefile" requires $fromtree to + be any tree (it used to require it to be a commit), for example. + "git reset" (without options or parameters) used to error out when + you do not have any commits in your history, but it now gives you + an empty index (to match non-existent commit you are not even on). + + * "git status" says what branch is being bisected or rebased when + able, not just "bisecting" or "rebasing". + + * "git submodule" started learning a new mode to integrate with the + tip of the remote branch (as opposed to integrating with the commit + recorded in the superproject's gitlink). + + * "git upload-pack" which implements the service "ls-remote" and + "fetch" talk to can be told to hide ref hierarchies the server + side internally uses (and that clients have no business learning + about) with transfer.hiderefs configuration. + + Foreign Interface - * + * "git fast-export" has been updated for its use in the context of + the remote helper interface. + + * A new remote helper to interact with bzr has been added to contrib/. + + * "git p4" got various bugfixes around its branch handling. It is + also made usable with Python 2.4/2.5. In addition, its various + portability issues for Cygwin have been addressed. + + * The remote helper to interact with Hg in contrib/ has seen a few + fixes. + Performance, Internal Implementation, etc. - * + * "git fsck" has been taught to be pickier about entries in tree + objects that should not be there, e.g. ".", ".git", and "..". + + * Matching paths with common forms of pathspecs that contain wildcard + characters has been optimized further. + + * We stopped paying attention to $GIT_CONFIG environment that points + at a single configuration file from any command other than "git config" + quite a while ago, but "git clone" internally set, exported, and + then unexported the variable during its operation unnecessarily. + + * "git reset" internals has been reworked and should be faster in + general. We tried to be careful not to break any behaviour but + there could be corner cases, especially when running the command + from a conflicted state, that we may have missed. + + * The implementation of "imap-send" has been updated to reuse xml + quoting code from http-push codepath, and lost a lot of unused + code. + + * There is a simple-minded checker for the test scripts in t/ + directory to catch most common mistakes (it is not enabled by + default). + + * You can build with USE_WILDMATCH=YesPlease to use a replacement + implementation of pattern matching logic used for pathname-like + things, e.g. refnames and paths in the repository. This new + implementation is not expected change the existing behaviour of Git + in this release, except for "git for-each-ref" where you can now + say "refs/**/master" and match with both refs/heads/master and + refs/remotes/origin/master. We plan to use this new implementation + in wider places (e.g. "git ls-files '**/Makefile' may find Makefile + at the top-level, and "git log '**/t*.sh'" may find commits that + touch a shell script whose name begins with "t" at any level) in + future versions of Git, but we are not there yet. By building with + USE_WILDMATCH, using the resulting Git daily and reporting when you + find breakages, you can help us get closer to that goal. + + * Some reimplementations of Git do not write all the stat info back + to the index due to their implementation limitations (e.g. jgit). + A configuration option can tell Git to ignore changes to most of + the stat fields and only pay attention to mtime and size, which + these implementations can reliably update. This can be used to + avoid excessive revalidation of contents. + + * Some platforms ship with old version of expat where xmlparse.h + needs to be included instead of expat.h; the build procedure has + been taught about this. + + * "make clean" on platforms that cannot compute header dependencies + on the fly did not work with implementations of "rm" that do not + like an empty argument list. Also contains minor documentation updates and code clean-ups. @@ -47,60 +276,220 @@ details). * An element on GIT_CEILING_DIRECTORIES list that does not name the real path to a directory (i.e. a symbolic link) could have caused the GIT_DIR discovery logic to escape the ceiling. - (merge 059b379 mh/ceiling later to maint). - - * t4014, t9502 and t0200 tests had various portability issues that - broke on OpenBSD. - (merge 27f6342 jc/maint-test-portability later to maint). - - * t9020 and t3600 tests had various portability issues. - (merge 5a02966 jc/test-portability later to maint). - * t9200 runs "cvs init" on a directory that already exists, but a - platform can configure this fail for the current user (e.g. you - need to be in the cvsadmin group on NetBSD 6.0). - (merge 8666df0 jc/test-cvs-no-init-in-existing-dir later to maint). + * When attempting to read the XDG-style $HOME/.config/git/config and + finding that $HOME/.config/git is a file, we gave a wrong error + message, instead of treating the case as "a custom config file does + not exist there" and moving on. * The behaviour visible to the end users was confusing, when they attempt to kill a process spawned in the editor that was in turn launched by Git with SIGINT (or SIGQUIT), as Git would catch that signal and die. We ignore these signals now. - (merge 1250857 pf/editor-ignore-sigint later to maint). + (merge 0398fc34 pf/editor-ignore-sigint later to maint). + + * A child process that was killed by a signal (e.g. SIGINT) was + reported in an inconsistent way depending on how the process was + spawned by us, with or without a shell in between. * After failing to create a temporary file using mkstemp(), failing pathname was not reported correctly on some platforms. - (merge f7be59b jc/mkstemp-more-careful-error-reporting later to maint). + + * We used to stuff "user@" and then append what we read from + /etc/mailname to come up with a default e-mail ident, but a bug + lost the "user@" part. + + * The attribute mechanism didn't allow limiting attributes to be + applied to only a single directory itself with "path/" like the + exclude mechanism does. The initial implementation of this that + was merged to 'maint' and 1.8.1.2 was with a severe performance + degradations and needs to merge a fix-up topic. + + * The smart HTTP clients forgot to verify the content-type that comes + back from the server side to make sure that the request is being + handled properly. + + * "git am" did not parse datestamp correctly from Hg generated patch, + when it is run in a locale outside C (or en). + + * "git apply" misbehaved when fixing whitespace breakages by removing + excess trailing blank lines. + + * "git apply --summary" has been taught to make sure the similarity + value shown in its output is sensible, even when the input had a + bogus value. + + * A tar archive created by "git archive" recorded a directory in a + way that made NetBSD's implementation of "tar" sometimes unhappy. + + * "git archive" did not record uncompressed size in the header when + streaming a zip archive, which confused some implementations of unzip. + + * "git archive" did not parse configuration values in tar.* namespace + correctly. + (merge b3873c3 jk/config-parsing-cleanup later to maint). + + * Attempt to "branch --edit-description" an existing branch, while + being on a detached HEAD, errored out. + + * "git clean" showed what it was going to do, but sometimes end up + finding that it was not allowed to do so, which resulted in a + confusing output (e.g. after saying that it will remove an + untracked directory, it found an embedded git repository there + which it is not allowed to remove). It now performs the actions + and then reports the outcome more faithfully. + + * When "git clone --separate-git-dir=$over_there" is interrupted, it + failed to remove the real location of the $GIT_DIR it created. + This was most visible when interrupting a submodule update. + + * "git cvsimport" mishandled timestamps at DST boundary. + + * We used to have an arbitrary 32 limit for combined diff input, + resulting in incorrect number of leading colons shown when showing + the "--raw --cc" output. + + * "git fetch --depth" was broken in at least three ways. The + resulting history was deeper than specified by one commit, it was + unclear how to wipe the shallowness of the repository with the + command, and documentation was misleading. + (merge cfb70e1 nd/fetch-depth-is-broken later to maint). + + * "git log --all -p" that walked refs/notes/textconv/ ref can later + try to use the textconv data incorrectly after it gets freed. + + * We forgot to close the file descriptor reading from "gpg" output, + killing "git log --show-signature" on a long history. * The way "git svn" asked for password using SSH_ASKPASS and GIT_ASKPASS was not in line with the rest of the system. - (merge e9263e4 ss/svn-prompt later to maint). * The --graph code fell into infinite loop when asked to do what the code did not expect. - (merge 656197a mk/maint-graph-infinity-loop later to maint). * http transport was wrong to ask for the username when the authentication is done by certificate identity. - (merge 75e9a40 rb/http-cert-cred-no-username-prompt later to maint). * "git pack-refs" that ran in parallel to another process that created new refs had a nasty race. - (merge b3f1280 jk/repack-ref-racefix later to maint). + + * Rebasing the history of superproject with change in the submodule + has been broken since v1.7.12. * After "git add -N" and then writing a tree object out of the index, the cache-tree data structure got corrupted. - (merge eec3e7e nd/invalidate-i-t-a-cache-tree later to maint). + + * "git clone" used to allow --bare and --separate-git-dir=$there + options at the same time, which was nonsensical. + + * "git rebase --preserve-merges" lost empty merges in recent versions + of Git. + + * "git merge --no-edit" computed who were involved in the work done + on the side branch, even though that information is to be discarded + without getting seen in the editor. + + * "git merge" started calling prepare-commit-msg hook like "git + commit" does some time ago, but forgot to pay attention to the exit + status of the hook. + + * A failure to push due to non-ff while on an unborn branch + dereferenced a NULL pointer when showing an error message. + + * When users spell "cc:" in lowercase in the fake "header" in the + trailer part, "git send-email" failed to pick up the addresses from + there. As e-mail headers field names are case insensitive, this + script should follow suit and treat "cc:" and "Cc:" the same way. + + * Output from "git status --ignored" showed an unexpected interaction + with "--untracked". * "gitweb", when sorting by age to show repositories with new activities first, used to sort repositories with absolutely nothing in it early, which was not very useful. - (merge 28dae18 md/gitweb-sort-by-age later to maint). + + * "gitweb"'s code to sanitize control characters before passing it to + "highlight" filter lost known-to-be-safe control characters by + mistake. + + * "gitweb" pages served over HTTPS, when configured to show picon or + gravatar, referred to these external resources to be fetched via + HTTP, resulting in mixed contents warning in browsers. * When a line to be wrapped has a solid run of non space characters whose length exactly is the wrap width, "git shortlog -w" failed to add a newline after such a line. - (merge e0db176 sp/shortlog-missing-lf later to maint). + + * Command line completion leaked an unnecessary error message while + looking for possible matches with paths in <tree-ish>. + + * Command line completion for "tcsh" emitted an unwanted space + after completing a single directory name. + + * Command line completion code was inadvertently made incompatible with + older versions of bash by using a newer array notation. + + * "git push" was taught to refuse updating the branch that is + currently checked out long time ago, but the user manual was left + stale. + (merge 50995ed wk/man-deny-current-branch-is-default-these-days later to maint). * Some shells do not behave correctly when IFS is unset; work it around by explicitly setting it to the default value. - (merge 393050c jc/maint-fbsd-sh-ifs-workaround later to maint). + + * Some scripted programs written in Python did not get updated when + PYTHON_PATH changed. + (cherry-pick 96a4647fca54031974cd6ad1 later to maint). + + * When autoconf is used, any build on a different commit always ran + "config.status --recheck" even when unnecessary. + + * A fix was added to the build procedure to work around buggy + versions of ccache broke the auto-generation of dependencies, which + unfortunately is still relevant because some people use ancient + distros. + + * The autoconf subsystem passed --mandir down to generated + config.mak.autogen but forgot to do the same for --htmldir. + (merge 55d9bf0 ct/autoconf-htmldir later to maint). + + * A change made on v1.8.1.x maintenance track had a nasty regression + to break the build when autoconf is used. + (merge 7f1b697 jn/less-reconfigure later to maint). + + * We have been carrying a translated and long-unmaintained copy of an + old version of the tutorial; removed. + + * t0050 had tests expecting failures from a bug that was fixed some + time ago. + + * t4014, t9502 and t0200 tests had various portability issues that + broke on OpenBSD. + + * t9020 and t3600 tests had various portability issues. + + * t9200 runs "cvs init" on a directory that already exists, but a + platform can configure this fail for the current user (e.g. you + need to be in the cvsadmin group on NetBSD 6.0). + + * t9020 and t9810 had a few non-portable shell script construct. + + * Scripts to test bash completion was inherently flaky as it was + affected by whatever random things the user may have on $PATH. + + * An element on GIT_CEILING_DIRECTORIES could be a "logical" pathname + that uses a symbolic link to point at somewhere else (e.g. /home/me + that points at /net/host/export/home/me, and the latter directory + is automounted). Earlier when Git saw such a pathname e.g. /home/me + on this environment variable, the "ceiling" mechanism did not take + effect. With this release (the fix has also been merged to the + v1.8.1.x maintenance series), elements on GIT_CEILING_DIRECTORIES + are by default checked for such aliasing coming from symbolic + links. As this needs to actually resolve symbolic links for each + element on the GIT_CEILING_DIRECTORIES, you can disable this + mechanism for some elements by listing them after an empty element + on the GIT_CEILING_DIRECTORIES. e.g. Setting /home/me::/home/him to + GIT_CEILING_DIRECTORIES makes Git resolve symbolic links in + /home/me when checking if the current directory is under /home/me, + but does not do so for /home/him. + (merge 7ec30aa mh/maint-ceil-absolute later to maint). diff --git a/Documentation/RelNotes/1.8.3.1.txt b/Documentation/RelNotes/1.8.3.1.txt new file mode 100644 index 0000000..fc3ea18 --- /dev/null +++ b/Documentation/RelNotes/1.8.3.1.txt @@ -0,0 +1,14 @@ +Git v1.8.3.1 Release Notes +======================== + +Fixes since v1.8.3 +------------------ + + * When $HOME is misconfigured to point at an unreadable directory, we + used to complain and die. The check has been loosened. + + * Handling of negative exclude pattern for directories "!dir" was + broken in the update to v1.8.3. + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.3.2.txt b/Documentation/RelNotes/1.8.3.2.txt new file mode 100644 index 0000000..26ae142 --- /dev/null +++ b/Documentation/RelNotes/1.8.3.2.txt @@ -0,0 +1,59 @@ +Git v1.8.3.2 Release Notes +========================== + +Fixes since v1.8.3.1 +-------------------- + + * Cloning with "git clone --depth N" while fetch.fsckobjects (or + transfer.fsckobjects) is set to true did not tell the cut-off + points of the shallow history to the process that validates the + objects and the history received, causing the validation to fail. + + * "git checkout foo" DWIMs the intended "upstream" and turns it into + "git checkout -t -b foo remotes/origin/foo". This codepath has been + updated to correctly take existing remote definitions into account. + + * "git fetch" into a shallow repository from a repository that does + not know about the shallow boundary commits (e.g. a different fork + from the repository the current shallow repository was cloned from) + did not work correctly. + + * "git subtree" (in contrib/) had one codepath with loose error + checks to lose data at the remote side. + + * "git log --ancestry-path A...B" did not work as expected, as it did + not pay attention to the fact that the merge base between A and B + was the bottom of the range being specified. + + * "git diff -c -p" was not showing a deleted line from a hunk when + another hunk immediately begins where the earlier one ends. + + * "git merge @{-1}~22" was rewritten to "git merge frotz@{1}~22" + incorrectly when your previous branch was "frotz" (it should be + rewritten to "git merge frotz~22" instead). + + * "git commit --allow-empty-message -m ''" should not start an + editor. + + * "git push --[no-]verify" was not documented. + + * An entry for "file://" scheme in the enumeration of URL types Git + can take in the HTML documentation was made into a clickable link + by mistake. + + * zsh prompt script that borrowed from bash prompt script did not + work due to slight differences in array variable notation between + these two shells. + + * The bash prompt code (in contrib/) displayed the name of the branch + being rebased when "rebase -i/-m/-p" modes are in use, but not the + plain vanilla "rebase". + + * "git push $there HEAD:branch" did not resolve HEAD early enough, so + it was easy to flip it around while push is still going on and push + out a branch that the user did not originally intended when the + command was started. + + * "difftool --dir-diff" did not copy back changes made by the + end-user in the diff tool backend to the working tree in some + cases. diff --git a/Documentation/RelNotes/1.8.3.3.txt b/Documentation/RelNotes/1.8.3.3.txt new file mode 100644 index 0000000..9ba4f4d --- /dev/null +++ b/Documentation/RelNotes/1.8.3.3.txt @@ -0,0 +1,47 @@ +Git v1.8.3.3 Release Notes +========================== + +Fixes since v1.8.3.2 +-------------------- + + * "git apply" parsed patches that add new files, generated by programs + other than Git, incorrectly. This is an old breakage in v1.7.11. + + * Older cURL wanted piece of memory we call it with to be stable, but + we updated the auth material after handing it to a call. + + * "git pull" into nothing trashed "local changes" that were in the + index. + + * Many "git submodule" operations did not work on a submodule at a + path whose name is not in ASCII. + + * "cherry-pick" had a small leak in its error codepath. + + * Logic used by git-send-email to suppress cc mishandled names like + "A U. Thor" <author@example.xz>, where the human readable part + needs to be quoted (the user input may not have the double quotes + around the name, and comparison was done between quoted and + unquoted strings). It also mishandled names that need RFC2047 + quoting. + + * "gitweb" forgot to clear a global variable $search_regexp upon each + request, mistakenly carrying over the previous search to a new one + when used as a persistent CGI. + + * The wildmatch engine did not honor WM_CASEFOLD option correctly. + + * "git log -c --follow $path" segfaulted upon hitting the commit that + renamed the $path being followed. + + * When a reflog notation is used for implicit "current branch", + e.g. "git log @{u}", we did not say which branch and worse said + "branch ''" in the error messages. + + * Mac OS X does not like to write(2) more than INT_MAX number of + bytes; work it around by chopping write(2) into smaller pieces. + + * Newer MacOS X encourages the programs to compile and link with + their CommonCrypto, not with OpenSSL. + +Also contains various minor documentation updates. diff --git a/Documentation/RelNotes/1.8.3.4.txt b/Documentation/RelNotes/1.8.3.4.txt new file mode 100644 index 0000000..56f106e --- /dev/null +++ b/Documentation/RelNotes/1.8.3.4.txt @@ -0,0 +1,20 @@ +Git v1.8.3.4 Release Notes +========================== + +This update is mostly to propagate documentation fixes and test +updates from the master front back to the maintenance track. + +Fixes since v1.8.3.3 +-------------------- + + * The bisect log listed incorrect commits when bisection ends with + only skipped ones. + + * The test coverage framework was left broken for some time. + + * The test suite for HTTP transport did not run with Apache 2.4. + + * "git diff" used to fail when core.safecrlf is set and the working + tree contents had mixed CRLF/LF line endings. Committing such a + content must be prohibited, but "git diff" should help the user to + locate and fix such problems without failing. diff --git a/Documentation/RelNotes/1.8.3.txt b/Documentation/RelNotes/1.8.3.txt new file mode 100644 index 0000000..ead568e --- /dev/null +++ b/Documentation/RelNotes/1.8.3.txt @@ -0,0 +1,436 @@ +Git v1.8.3 Release Notes +======================== + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics that pushes only the current branch to the branch with the same +name, and only when the current branch is set to integrate with that +remote branch. Use the user preference configuration variable +"push.default" to change this. If you are an old-timer who is used +to the "matching" semantics, you can set the variable to "matching" +to keep the traditional behaviour. If you want to live in the future +early, you can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + + +Updates since v1.8.2 +-------------------- + +Foreign interface + + * remote-hg and remote-bzr helpers (in contrib/ since v1.8.2) have + been updated; especially, the latter has been done in an + accelerated schedule (read: we may not have merged to this release + if we were following the usual "cook sufficiently in next before + unleashing it to the world" workflow) in order to help Emacs folks, + whose primary SCM seems to be stagnating. + + +UI, Workflows & Features + + * A handful of updates applied to gitk, including an addition of + "revert" action, showing dates in tags in a nicer way, making + colors configurable, and support for -G'pickaxe' search. + + * The prompt string generator (in contrib/completion/) learned to + show how many changes there are in total and how many have been + replayed during a "git rebase" session. + + * "git branch --vv" learned to paint the name of the branch it + integrates with in a different color (color.branch.upstream, + which defaults to blue). + + * In a sparsely populated working tree, "git checkout <pathspec>" no + longer unmarks paths that match the given pathspec that were + originally ignored with "--sparse" (use --ignore-skip-worktree-bits + option to resurrect these paths out of the index if you really want + to). + + * "git log --format" specifier learned %C(auto) token that tells Git + to use color when interpolating %d (decoration), %h (short commit + object name), etc. for terminal output. + + * "git bisect" leaves the final outcome as a comment in its bisect + log file. + + * "git clone --reference" can now refer to a gitfile "textual symlink" + that points at the real location of the repository. + + * "git count-objects" learned "--human-readable" aka "-H" option to + show various large numbers in Ki/Mi/GiB scaled as necessary. + + * "git cherry-pick $blob" and "git cherry-pick $tree" are nonsense, + and a more readable error message e.g. "can't cherry-pick a tree" + is given (we used to say "expected exactly one commit"). + + * The "--annotate" option to "git send-email" can be turned on (or + off) by default with sendemail.annotate configuration variable (you + can use --no-annotate from the command line to override it). + + * The "--cover-letter" option to "git format-patch" can be turned on + (or off) by default with format.coverLetter configuration + variable. By setting it to 'auto', you can turn it on only for a + series with two or more patches. + + * The bash completion support (in contrib/) learned that cherry-pick + takes a few more options than it already knew about. + + * "git help" learned "-g" option to show the list of guides just like + list of commands are given with "-a". + + * A triangular "pull from one place, push to another place" workflow + is supported better by new remote.pushdefault (overrides the + "origin" thing) and branch.*.pushremote (overrides the + branch.*.remote) configuration variables. + + * "git status" learned to report that you are in the middle of a + revert session, just like it does for a cherry-pick and a bisect + session. + + * The handling by "git branch --set-upstream-to" against various forms + of erroneous inputs was suboptimal and has been improved. + + * When the interactive access to git-shell is not enabled, it issues + a message meant to help the system administrator to enable it. An + explicit way has been added to issue custom messages to refuse an + access over the network to help the end users who connect to the + service expecting an interactive shell. + + * In addition to the case where the user edits the log message with + the "e)dit" option of "am -i", replace the "Applying: this patch" + message with the final log message contents after applymsg hook + munges it. + + * "git status" suggests users to look into using --untracked=no option + when it takes too long. + + * "git status" shows a bit more information during a rebase/bisect + session. + + * "git fetch" learned to fetch a commit at the tip of an unadvertised + ref by specifying a raw object name from the command line when the + server side supports this feature. + + * Output from "git log --graph" works better with submodule log + output now. + + * "git count-objects -v" learned to report leftover temporary + packfiles and other garbage in the object store. + + * A new read-only credential helper (in contrib/) to interact with + the .netrc/.authinfo files has been added. + + * "git send-email" can be used with the credential helper system. + + * There was no Porcelain way to say "I no longer am interested in + this submodule", once you express your interest in a submodule with + "submodule init". "submodule deinit" is the way to do so. + + * "git pull --rebase" learned to pass "-v/-q" options to underlying + "git rebase". + + * The new "--follow-tags" option tells "git push" to push relevant + annotated tags when pushing branches out. + + * "git merge" and "git pull" can optionally be told to inspect and + reject when merging a commit that does not carry a trusted GPG + signature. + + * "git mergetool" now feeds files to the "p4merge" backend in the + order that matches the p4 convention, where "theirs" is usually + shown on the left side, which is the opposite from what other backends + expect. + + * "show/log" now honors gpg.program configuration just like other + parts of the code that use GnuPG. + + * "git log" that shows the difference between the parent and the + child has been optimized somewhat. + + * "git difftool" allows the user to write into the temporary files + being shown; if the user makes changes to the working tree at the + same time, it now refrains from overwriting the copy in the working + tree and leaves the temporary file so that changes can be merged + manually. + + * There was no good way to ask "I have a random string that came from + outside world. I want to turn it into a 40-hex object name while + making sure such an object exists". A new peeling suffix ^{object} + can be used for that purpose, together with "rev-parse --verify". + + +Performance, Internal Implementation, etc. + + * Updates for building under msvc. + + * A handful of issues in the code that traverses the working tree to find + untracked and/or ignored files have been fixed, and the general + codepath involved in "status -u" and "clean" have been cleaned up + and optimized. + + * The stack footprint of some codepaths that access an object from a + pack has been shrunk. + + * The logic to coalesce the same lines removed from the parents in + the output from "diff -c/--cc" has been updated, but with O(n^2) + complexity, so this might turn out to be undesirable. + + * The code to enforce permission bits on files in $GIT_DIR/ for + shared repositories has been simplified. + + * A few codepaths know how much data they need to put in the + hashtables they use when they start, but still began with small tables + and repeatedly grew and rehashed them. + + * The API to walk reflog entries from the latest to older, which was + necessary for operations such as "git checkout -", was cumbersome + to use correctly and also inefficient. + + * Codepaths that inspect log-message-to-be and decide when to add a + new Signed-off-by line in various commands have been consolidated. + + * The pkt-line API, implementation and its callers have been cleaned + up to make them more robust. + + * The Cygwin port has a faster-but-lying lstat(2) emulation whose + incorrectness does not matter in practice except for a few + codepaths, and setting permission bits on directories is a codepath + that needs to use a more correct one. + + * "git checkout" had repeated pathspec matches on the same paths, + which have been consolidated. Also a bug in "git checkout dir/" + that is started from an unmerged index has been fixed. + + * A few bugfixes to "git rerere" working on corner case merge + conflicts have been applied. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.2 +------------------ + +Unless otherwise noted, all the fixes since v1.8.2 in the maintenance +track are contained in this release (see release notes to them for +details). + + * Recent versions of File::Temp (used by "git svn") started blowing + up when its tempfile sub is called as a class method; updated the + callsite to call it as a plain vanilla function to fix it. + (merge eafc2dd hb/git-pm-tempfile later to maint). + + * Various subcommands of "git remote" simply ignored extraneous + command line arguments instead of diagnosing them as errors. + + * When receive-pack detects an error in the pack header it received in + order to decide which of unpack-objects or index-pack to run, it + returned without closing the error stream, which led to a hung + sideband thread. + + * Zsh completion forgot that the '%' character used to signal untracked + files needs to be escaped with another '%'. + + * A commit object whose author or committer ident are malformed + crashed some code that trusted that a name, an email and a + timestamp can always be found in it. + + * When "upload-pack" fails while generating a pack in response to + "git fetch" (or "git clone"), the receiving side had + a programming error that triggered the die handler + recursively. + + * "rev-list --stdin" and friends kept bogus pointers into the input + buffer around as human readable object names. This was not a huge + problem but was exposed by a new change that uses these names in + error output. + + * Smart-capable HTTP servers were not restricted via the + GIT_NAMESPACE mechanism when talking with commit-walking clients, + like they are when talking with smart HTTP clients. + (merge 6130f86 jk/http-dumb-namespaces later to maint). + + * "git merge-tree" did not omit a merge result that is identical to + the "our" side in certain cases. + (merge aacecc3 jk/merge-tree-added-identically later to maint). + + * Perl scripts like "git-svn" closed (instead of redirecting to /dev/null) + the standard error stream, which is not a very smart thing to do. + A later open may return file descriptor #2 for an unrelated purpose, and + error reporting code may write into it. + + * "git show-branch" was not prepared to show a very long run of + ancestor operators e.g. foobar^2~2^2^2^2...^2~4 correctly. + + * "git diff --diff-algorithm algo" is also understood as "git diff + --diff-algorithm=algo". + + * The new core.commentchar configuration was not applied in a few + places. + + * "git bundle" erroneously bailed out when parsing a valid bundle + containing a prerequisite commit without a commit message. + + * "git log -S/-G" started paying attention to textconv filter, but + there was no way to disable this. Make it honor the --no-textconv + option. + + * When used with the "-d temporary-directory" option, "git filter-branch" + failed to come back to the original working tree to perform the + final clean-up procedure. + + * "git merge $(git rev-parse v1.8.2)" behaved quite differently from + "git merge v1.8.2", as if v1.8.2 were written as v1.8.2^0 and did + not pay much attention to the annotated tag payload. Make the code + notice the type of the tag object, in addition to the dwim_ref() + based classification the current code uses (i.e. the name appears + in refs/tags/) to decide when to special-case tag merging. + + * Fix a 1.8.1.x regression that stopped matching "dir" (without a + trailing slash) to a directory "dir". + + * "git apply --whitespace=fix" was not prepared to see a line getting + longer after fixing whitespaces (e.g. tab-in-indent aka Python). + + * The prompt string generator (in contrib/completion/) did not notice + when we are in a middle of a "git revert" session. + + * "submodule summary --summary-limit" option did not support the + "--option=value" form. + + * "index-pack --fix-thin" used an uninitialized value to compute + the delta depths of objects it appends to the resulting pack. + + * "index-pack --verify-stat" used a few counters outside the protection + of a mutex, possibly showing incorrect numbers. + + * The code to keep track of what directory names are known to Git on + platforms with case insensitive filesystems could get confused upon a + hash collision between these pathnames and would loop forever. + + * Annotated tags outside the refs/tags/ hierarchy were not advertised + correctly to ls-remote and fetch with recent versions of Git. + + * Recent optimizations broke shallow clones. + + * "git cmd -- ':(top'" was not diagnosed as an invalid syntax, and + instead the parser kept reading beyond the end of the string. + + * "git tag -f <tag>" always said "Updated tag '<tag>'" even when + creating a new tag (i.e. neither overwriting nor updating). + + * "git p4" did not behave well when the path to the root of the P4 + client was not its real path. + (merge bbd8486 pw/p4-symlinked-root later to maint). + + * "git archive" reported a failure when asked to create an archive out + of an empty tree. It is more intuitive to give an empty + archive back in such a case. + + * When "format-patch" quoted a non-ascii string in header files, + it incorrectly applied rfc2047 and chopped a single character in + the middle of the string. + + * An aliased command spawned from a bare repository that does not say + it is bare with "core.bare = yes" was treated as non-bare by mistake. + + * In "git reflog expire", the REACHABLE bit was not cleared from the + correct objects. + + * The logic used by "git diff -M --stat" to shorten the names of + files before and after a rename did not work correctly when the + common prefix and suffix between the two filenames overlapped. + + * The "--match=<pattern>" option of "git describe", when used with + "--all" to allow refs that are not annotated tags to be a + base of description, did not restrict the output from the command + to those refs that match the given pattern. + + * Clarify in the documentation "what" gets pushed to "where" when the + command line to "git push" does not say these explicitly. + + * The "--color=<when>" argument to the commands in the diff family + was described poorly. + + * The arguments given to the pre-rebase hook were not documented. + + * The v4 index format was not documented. + + * The "--match=<pattern>" argument "git describe" takes uses glob + pattern but it wasn't obvious from the documentation. + + * Some sources failed to compile on systems that lack NI_MAXHOST in + their system header (e.g. z/OS). + + * Add an example use of "--env-filter" in "filter-branch" + documentation. + + * "git bundle verify" did not say "records a complete history" for a + bundle that does not have any prerequisites. + + * In the v1.8.0 era, we changed symbols that do not have to be global + to file scope static, but a few functions in graph.c were used by + CGit sideways, bypassing the entry points of the API the + in-tree users use. + + * "git update-index -h" did not do the usual "-h(elp)" thing. + + * "git index-pack" had a buffer-overflow while preparing an + informational message when the translated version of it was too + long. + + * 'git commit -m "$msg"' used to add an extra newline even when + $msg already ended with one. + + * The SSL peer verification done by "git imap-send" did not ask for + Server Name Indication (RFC 4366), failing to connect to SSL/TLS + sites that serve multiple hostnames on a single IP. + + * perl/Git.pm::cat_blob slurped everything in core only to write it + out to a file descriptor, which was not a very smart thing to do. + + * "git branch" did not bother to check nonsense command line + parameters. It now issues errors in many cases. + + * Verification of signed tags was not done correctly when not in C + or en/US locale. + + * Some platforms and users spell UTF-8 differently; retry with the + most official "UTF-8" when the system does not understand the + user-supplied encoding name that is a common alternative + spelling of UTF-8. + + * When export-subst is used, "zip" output recorded an incorrect + size of the file. + + * "git am $maildir/" applied messages in an unexpected order; sort + filenames read from the maildir/ in a way that is more likely to + sort the messages in the order the writing MUA meant to, by sorting + numeric segments in numeric order and non-numeric segments in + alphabetical order. + + * "git submodule update", when recursed into sub-submodules, did not + accumulate the prefix paths. diff --git a/Documentation/RelNotes/1.8.4.1.txt b/Documentation/RelNotes/1.8.4.1.txt new file mode 100644 index 0000000..3aa25a2 --- /dev/null +++ b/Documentation/RelNotes/1.8.4.1.txt @@ -0,0 +1,71 @@ +Git v1.8.4.1 Release Notes +======================== + +Fixes since v1.8.4 +------------------ + + * Some old versions of bash do not grok some constructs like + 'printf -v varname' which the prompt and completion code started + to use recently. The completion and prompt scripts have been + adjusted to work better with these old versions of bash. + + * In FreeBSD's and NetBSD's "sh", a return in a dot script in a + function returns from the function, not only in the dot script, + breaking "git rebase" on these platforms (regression introduced + in 1.8.4-rc1). + + * "git rebase -i" and other scripted commands were feeding a + random, data dependant error message to 'echo' and expecting it + to come out literally. + + * Setting the "submodule.<name>.path" variable to the empty + "true" caused the configuration parser to segfault. + + * Output from "git log --full-diff -- <pathspec>" looked strange + because comparison was done with the previous ancestor that + touched the specified <pathspec>, causing the patches for paths + outside the pathspec to show more than the single commit has + changed. + + * The auto-tag-following code in "git fetch" tries to reuse the + same transport twice when the serving end does not cooperate and + does not give tags that point to commits that are asked for as + part of the primary transfer. Unfortunately, Git-aware transport + helper interface is not designed to be used more than once, hence + this did not work over smart-http transfer. Fixed. + + * Send a large request to read(2)/write(2) as a smaller but still + reasonably large chunks, which would improve the latency when the + operation needs to be killed and incidentally works around broken + 64-bit systems that cannot take a 2GB write or read in one go. + + * A ".mailmap" file that ends with an incomplete line, when read + from a blob, was not handled properly. + + * The recent "short-cut clone connectivity check" topic broke a + shallow repository when a fetch operation tries to auto-follow + tags. + + * When send-email comes up with an error message to die with upon + failure to start an SSL session, it tried to read the error + string from a wrong place. + + * A call to xread() was used without a loop to cope with short + read in the codepath to stream large blobs to a pack. + + * On platforms with fgetc() and friends defined as macros, the + configuration parser did not compile. + + * New versions of MediaWiki introduced a new API for returning + more than 500 results in response to a query, which would cause + the MediaWiki remote helper to go into an infinite loop. + + * Subversion's serf access method (the only one available in + Subversion 1.8) for http and https URLs in skelta mode tells its + caller to open multiple files at a time, which made "git svn + fetch" complain that "Temp file with moniker 'svn_delta' already + in use" instead of fetching. + + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.4.2.txt b/Documentation/RelNotes/1.8.4.2.txt new file mode 100644 index 0000000..9adccb1 --- /dev/null +++ b/Documentation/RelNotes/1.8.4.2.txt @@ -0,0 +1,77 @@ +Git v1.8.4.2 Release Notes +======================== + +Fixes since v1.8.4.1 +-------------------- + + * "git clone" gave some progress messages to the standard output, not + to the standard error, and did not allow suppressing them with the + "--no-progress" option. + + * "format-patch --from=<whom>" forgot to omit unnecessary in-body + from line, i.e. when <whom> is the same as the real author. + + * "git shortlog" used to choke and die when there is a malformed + commit (e.g. missing authors); it now simply ignore such a commit + and keeps going. + + * "git merge-recursive" did not parse its "--diff-algorithm=" command + line option correctly. + + * "git branch --track" had a minor regression in v1.8.3.2 and later + that made it impossible to base your local work on anything but a + local branch of the upstream repository you are tracking from. + + * "git ls-files -k" needs to crawl only the part of the working tree + that may overlap the paths in the index to find killed files, but + shared code with the logic to find all the untracked files, which + made it unnecessarily inefficient. + + * When there is no sufficient overlap between old and new history + during a "git fetch" into a shallow repository, objects that the + sending side knows the receiving end has were unnecessarily sent. + + * When running "fetch -q", a long silence while the sender side + computes the set of objects to send can be mistaken by proxies as + dropped connection. The server side has been taught to send a + small empty messages to keep the connection alive. + + * When the webserver responds with "405 Method Not Allowed", "git + http-backend" should tell the client what methods are allowed with + the "Allow" header. + + * "git cvsserver" computed the permission mode bits incorrectly for + executable files. + + * The implementation of "add -i" has a crippling code to work around + ActiveState Perl limitation but it by mistake also triggered on Git + for Windows where MSYS perl is used. + + * We made sure that we notice the user-supplied GIT_DIR is actually a + gitfile, but did not do the same when the default ".git" is a + gitfile. + + * When an object is not found after checking the packfiles and then + loose object directory, read_sha1_file() re-checks the packfiles to + prevent racing with a concurrent repacker; teach the same logic to + has_sha1_file(). + + * "git commit --author=$name", when $name is not in the canonical + "A. U. Thor <au.thor@example.xz>" format, looks for a matching name + from existing history, but did not consult mailmap to grab the + preferred author name. + + * The commit object names in the insn sheet that was prepared at the + beginning of "rebase -i" session can become ambiguous as the + rebasing progresses and the repository gains more commits. Make + sure the internal record is kept with full 40-hex object names. + + * "git rebase --preserve-merges" internally used the merge machinery + and as a side effect, left merge summary message in the log, but + when rebasing, there should not be a need for merge summary. + + * "git rebase -i" forgot that the comment character can be + configurable while reading its insn sheet. + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.4.3.txt b/Documentation/RelNotes/1.8.4.3.txt new file mode 100644 index 0000000..03f3d17 --- /dev/null +++ b/Documentation/RelNotes/1.8.4.3.txt @@ -0,0 +1,54 @@ +Git v1.8.4.3 Release Notes +======================== + +Fixes since v1.8.4.2 +-------------------- + + * The interaction between use of Perl in our test suite and NO_PERL + has been clarified a bit. + + * A fast-import stream expresses a pathname with funny characters by + quoting them in C style; remote-hg remote helper (in contrib/) + forgot to unquote such a path. + + * One long-standing flaw in the pack transfer protocol used by "git + clone" was that there was no way to tell the other end which branch + "HEAD" points at, and the receiving end needed to guess. A new + capability has been defined in the pack protocol to convey this + information so that cloning from a repository with more than one + branches pointing at the same commit where the HEAD is at now + reliably sets the initial branch in the resulting repository. + + * We did not handle cases where http transport gets redirected during + the authorization request (e.g. from http:// to https://). + + * "git rev-list --objects ^v1.0^ v1.0" gave v1.0 tag itself in the + output, but "git rev-list --objects v1.0^..v1.0" did not. + + * The fall-back parsing of commit objects with broken author or + committer lines were less robust than ideal in picking up the + timestamps. + + * Bash prompting code to deal with an SVN remote as an upstream + were coded in a way not supported by older Bash versions (3.x). + + * "git checkout topic", when there is not yet a local "topic" branch + but there is a unique remote-tracking branch for a remote "topic" + branch, pretended as if "git checkout -t -b topic remote/$r/topic" + (for that unique remote $r) was run. This hack however was not + implemented for "git checkout topic --". + + * Coloring around octopus merges in "log --graph" output was screwy. + + * We did not generate HTML version of documentation to "git subtree" + in contrib/. + + * The synopsis section of "git unpack-objects" documentation has been + clarified a bit. + + * An ancient How-To on serving Git repositories on an HTTP server + lacked a warning that it has been mostly superseded with more + modern way. + +Also contains a handful of trivial code clean-ups, documentation +updates, updates to the test suite, etc. diff --git a/Documentation/RelNotes/1.8.4.4.txt b/Documentation/RelNotes/1.8.4.4.txt new file mode 100644 index 0000000..7bc4c5dc --- /dev/null +++ b/Documentation/RelNotes/1.8.4.4.txt @@ -0,0 +1,10 @@ +Git v1.8.4.4 Release Notes +======================== + +Fixes since v1.8.4.3 +-------------------- + + * The fix in v1.8.4.3 to the pack transfer protocol to propagate + the target of symbolic refs broke "git clone/git fetch" from a + repository with too many symbolic refs. As a hotfix/workaround, + we transfer only the information on HEAD. diff --git a/Documentation/RelNotes/1.8.4.5.txt b/Documentation/RelNotes/1.8.4.5.txt new file mode 100644 index 0000000..215bd1a --- /dev/null +++ b/Documentation/RelNotes/1.8.4.5.txt @@ -0,0 +1,13 @@ +Git v1.8.4.5 Release Notes +========================== + +Fixes since v1.8.4.4 +-------------------- + + * Recent update to remote-hg that attempted to make it work better + with non ASCII pathnames fed Unicode strings to the underlying Hg + API, which was wrong. + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.4.txt b/Documentation/RelNotes/1.8.4.txt new file mode 100644 index 0000000..02f681b --- /dev/null +++ b/Documentation/RelNotes/1.8.4.txt @@ -0,0 +1,486 @@ +Git v1.8.4 Release Notes +======================== + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics that pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + + +Updates since v1.8.3 +-------------------- + +Foreign interfaces, subsystems and ports. + + * Cygwin port has been updated for more recent Cygwin 1.7. + + * "git rebase -i" now honors --strategy and -X options. + + * Git-gui has been updated to its 0.18.0 version. + + * MediaWiki remote helper (in contrib/) has been updated to use the + credential helper interface from Git.pm. + + * Update build for Cygwin 1.[57]. Torsten Bögershausen reports that + this is fine with Cygwin 1.7 ($gmane/225824) so let's try moving it + ahead. + + * The credential helper to talk to keychain on OS X (in contrib/) has + been updated to kick in not just when talking http/https but also + imap(s) and smtp. + + * Remote transport helper has been updated to report errors and + maintain ref hierarchy used to keep track of its own state better. + + * With "export" remote-helper protocol, (1) a push that tries to + update a remote ref whose name is different from the pushing side + does not work yet, and (2) the helper may not know how to do + --dry-run; these problematic cases are disabled for now. + + * git-remote-hg/bzr (in contrib/) updates. + + * git-remote-mw (in contrib/) hints users to check the certificate, + when https:// connection failed. + + * git-remote-mw (in contrib/) adds a command to allow previewing the + contents locally before pushing it out, when working with a + MediaWiki remote. + + +UI, Workflows & Features + + * Sample "post-receive-email" hook script got an enhanced replacement + "multimail" (in contrib/). + + * Also in contrib/ is a new "contacts" script that runs "git blame" + to find out the people who may be interested in a set of changes. + + * "git clean" command learned an interactive mode. + + * The "--head" option to "git show-ref" was only to add "HEAD" to the + list of candidate refs to be filtered by the usual rules + (e.g. "--heads" that only show refs under refs/heads). The meaning + of the option has been changed to always show "HEAD" regardless of + what filtering will be applied to any other ref. + + This is a backward incompatible change and might cause breakages to + people's existing scripts. + + * "git show -s" was less discoverable than it should have been. It + now has a natural synonym "git show --no-patch". + + * "git check-mailmap" is a new command that lets you map usernames + and e-mail addresses through the mailmap mechanism, just like many + built-in commands do. + + * "git name-rev" learned to name an annotated tag object back to its + tagname; "git name-rev $(git rev-parse v1.0.0)" gives "tags/v1.0.0", + for example. + + * "git cat-file --batch-check=<format>" is added, primarily to allow + on-disk footprint of objects in packfiles (often they are a lot + smaller than their true size, when expressed as deltas) to be + reported. + + * "git rebase [-i]" used to leave just "rebase" as its reflog messages + for some operations. They have been reworded to be more informative. + + * In addition to the choice from "rebase, merge, or checkout-detach", + "submodule update" can allow a custom command to be used in to + update the working tree of submodules via the "submodule.*.update" + configuration variable. + + * "git submodule update" can optionally clone the submodule + repositories shallowly. + + * "git format-patch" learned "--from[=whom]" option, which sets the + "From: " header to the specified person (or the person who runs the + command, if "=whom" part is missing) and move the original author + information to an in-body From: header as necessary. + + * The configuration variable "merge.ff" was cleary a tri-state to + choose one from "favor fast-forward when possible", "always create + a merge even when the history could fast-forward" and "do not + create any merge, only update when the history fast-forwards", but + the command line parser did not implement the usual convention of + "last one wins, and command line overrides the configuration" + correctly. + + * "gitweb" learned to optionally place extra links that point at the + levels higher than the Gitweb pages themselves in the breadcrumbs, + so that it can be used as part of a larger installation. + + * "git log --format=" now honors i18n.logoutputencoding configuration + variable. + + * The "push.default=simple" mode of "git push" has been updated to + behave like "current" without requiring a remote tracking + information, when you push to a remote that is different from where + you fetch from (i.e. a triangular workflow). + + * Having multiple "fixup!" on a line in the rebase instruction sheet + did not work very well with "git rebase -i --autosquash". + + * "git log" learned the "--author-date-order" option, with which the + output is topologically sorted and commits in parallel histories + are shown intermixed together based on the author timestamp. + + * Various subcommands of "git submodule" refused to run from anywhere + other than the top of the working tree of the superproject, but + they have been taught to let you run from a subdirectory. + + * "git diff" learned a mode that ignores hunks whose change consists + only of additions and removals of blank lines, which is the same as + "diff -B" (ignore blank lines) of GNU diff. + + * "git rm" gives a single message followed by list of paths to report + multiple paths that cannot be removed. + + * "git rebase" can be told with ":/look for this string" syntax commits + to replay the changes onto and where the work to be replayed begins. + + * Many tutorials teach users to set "color.ui" to "auto" as the first + thing after you set "user.name/email" to introduce yourselves to + Git. Now the variable defaults to "auto". + + * On Cygwin, "cygstart" is now recognised as a possible way to start + a web browser (used in "help -w" and "instaweb" among others). + + * "git status" learned status.branch and status.short configuration + variables to use --branch and --short options by default (override + with --no-branch and --no-short options from the command line). + + * "git cmd <name>", when <name> happens to be a 40-hex string, + directly uses the 40-hex string as an object name, even if a ref + "refs/<some hierarchy>/<name>" exists. This disambiguation order + is unlikely to change, but we should warn about the ambiguity just + like we warn when more than one refs/ hierarchies share the same + name. + + * "git rebase" learned "--[no-]autostash" option to save local + changes instead of refusing to run (to which people's normal + response was to stash them and re-run). This introduced a corner + case breakage to "git am --abort" but it has been fixed. + + * "check-ignore" (new feature since 1.8.2) has been updated to work + more like "check-attr" over bidi-pipes. + + * "git describe" learned "--first-parent" option to limit its closest + tagged commit search to the first-parent chain. + + * "git merge foo" that might have meant "git merge origin/foo" is + diagnosed with a more informative error message. + + * "git log -L<line>,<range>:<filename>" has been added. This may + still have leaks and rough edges, though. + + * We used the approxidate() parser for "--expire=<timestamp>" options + of various commands, but it is better to treat --expire=all and + --expire=now a bit more specially than using the current timestamp. + "git gc" and "git reflog" have been updated with a new parsing + function for expiry dates. + + * Updates to completion (both bash and zsh) helpers. + + * The behaviour of the "--chain-reply-to" option of "git send-email" + have changed at 1.7.0, and we added a warning/advice message to + help users adjust to the new behaviour back then, but we kept it + around for too long. The message has finally been removed. + + * "git fetch origin master" unlike "git fetch origin" or "git fetch" + did not update "refs/remotes/origin/master"; this was an early + design decision to keep the update of remote tracking branches + predictable, but in practice it turns out that people find it more + convenient to opportunistically update them whenever we have a + chance, and we have been updating them when we run "git push" which + already breaks the original "predictability" anyway. + + * The configuration variable core.checkstat was advertised in the + documentation but the code expected core.statinfo instead. + For now, we accept both core.checkstat and core.statinfo, but the + latter will be removed in the longer term. + + +Performance, Internal Implementation, etc. + + * On Cygwin, we used to use our own lstat(2) emulation that is + allegedly faster than the platform one in codepaths where some of + the information it returns did not matter, but it started to bite + us in a few codepaths where the trick it uses to cheat does show + breakages. This emulation has been removed and we use the native + lstat(2) emulation supplied by Cygwin now. + + * The function attributes extensions are used to catch mistakes in + use of our own variadic functions that use NULL sentinel at the end + (i.e. like execl(3)) and format strings (i.e. like printf(3)). + + * The code to allow configuration data to be read from in-tree blob + objects is in. This may help working in a bare repository and + submodule updates. + + * Fetching between repositories with many refs employed O(n^2) + algorithm to match up the common objects, which has been corrected. + + * The original way to specify remote repository using .git/branches/ + used to have a nifty feature. The code to support the feature was + still in a function but the caller was changed not to call it 5 + years ago, breaking that feature and leaving the supporting code + unreachable. The dead code has been removed. + + * "git pack-refs" that races with new ref creation or deletion have + been susceptible to lossage of refs under right conditions, which + has been tightened up. + + * We read loose and packed references in two steps, but after + deciding to read a loose ref but before actually opening it to read + it, another process racing with us can unlink it, which would cause + us to barf. The codepath has been updated to retry when such a + race is detected, instead of outright failing. + + * Uses of the platform fnmatch(3) function (many places in the code, + matching pathspec, .gitignore and .gitattributes to name a few) + have been replaced with wildmatch, allowing "foo/**/bar" that would + match foo/bar, foo/a/bar, foo/a/b/bar, etc. + + * Memory ownership and lifetime rules for what for-each-ref feeds to + its callbacks have been clarified (in short, "you do not own it, so + make a copy if you want to keep it"). + + * The revision traversal logic to improve culling of irrelevant + parents while traversing a mergy history has been updated. + + * Some leaks in unpack-trees (used in merge, cherry-pick and other + codepaths) have been plugged. + + * The codepath to read from marks files in fast-import/export did not + have to accept anything but 40-hex representation of the object + name. Further, fast-export did not need full in-core object + representation to have parsed wen reading from them. These + codepaths have been optimized by taking advantage of these access + patterns. + + * Object lookup logic, when the object hashtable starts to become + crowded, has been optimized. + + * When TEST_OUTPUT_DIRECTORY setting is used, it was handled somewhat + inconsistently between the test framework and t/Makefile, and logic + to summarize the results looked at a wrong place. + + * "git clone" uses a lighter-weight implementation when making sure + that the history behind refs are complete. + + * Many warnings from sparse source checker in compat/ area has been + squelched. + + * The code to reading and updating packed-refs file has been updated, + correcting corner case bugs. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.3 +------------------ + +Unless otherwise noted, all the fixes since v1.8.3 in the maintenance +track are contained in this release (see release notes to them for +details). + + * Newer Net::SMTP::SSL module does not want the user programs to use + the default behaviour to let server certificate go without + verification, so by default enable the verification with a + mechanism to turn it off if needed. + (merge 35035bb rr/send-email-ssl-verify later to maint). + + * When "git" is spawned in such a way that any of the low 3 file + descriptors is closed, our first open() may yield file descriptor 2, + and writing error message to it would screw things up in a big way. + (merge a11c396 tr/protect-low-3-fds later to maint). + + * The mailmap mechanism unnecessarily downcased the e-mail addresses + in the output, and also ignored the human name when it is a single + character name. + (merge bd23794 jc/mailmap-case-insensitivity later to maint). + + * In two places we did not check return value (expected to be a file + descriptor) correctly. + (merge a77f106 tr/fd-gotcha-fixes later to maint). + + * Logic to auto-detect character encodings in the commit log message + did not reject overlong and invalid UTF-8 characters. + (merge 81050ac bc/commit-invalid-utf8 later to maint). + + * Pass port number as a separate argument when "send-email" initializes + Net::SMTP, instead of as a part of the hostname, i.e. host:port. + This allows GSSAPI codepath to match with the hostname given. + (merge 1a741bf bc/send-email-use-port-as-separate-param later to maint). + + * "git diff" refused to even show difference when core.safecrlf is + set to true (i.e. error out) and there are offending lines in the + working tree files. + (merge 5430bb2 jc/maint-diff-core-safecrlf later to maint). + + * A test that should have failed but didn't revealed a bug that needs + to be corrected. + (merge 94d75d1 jc/t1512-fix later to maint). + + * An overlong path to a .git directory may have overflown the + temporary path buffer used to create a name for lockfiles. + (merge 2fbd4f9 mh/maint-lockfile-overflow later to maint). + + * Invocations of "git checkout" used internally by "git rebase" were + counted as "checkout", and affected later "git checkout -" to the + the user to an unexpected place. + (merge 3bed291 rr/rebase-checkout-reflog later to maint). + + * The configuration variable column.ui was poorly documented. + (merge 5e62cc1 rr/column-doc later to maint). + + * "git name-rev --refs=tags/v*" were forbidden, which was a bit + inconvenient (you had to give a pattern to match refs fully, like + --refs=refs/tags/v*). + (merge 98c5c4a nk/name-rev-abbreviated-refs later to maint). + + * "git apply" parsed patches that add new files, generated by + programs other than Git, incorrectly. This is an old breakage in + v1.7.11 and will need to be merged down to the maintenance tracks. + + * Older cURL wanted piece of memory we call it with to be stable, but + we updated the auth material after handing it to a call. + + * "git pull" into nothing trashed "local changes" that were in the + index, and this avoids it. + + * Many "git submodule" operations do not work on a submodule at a + path whose name is not in ASCII. + + * "cherry-pick" had a small leak in an error codepath. + + * Logic used by git-send-email to suppress cc mishandled names like + "A U. Thor" <author@example.xz>, where the human readable part + needs to be quoted (the user input may not have the double quotes + around the name, and comparison was done between quoted and + unquoted strings). It also mishandled names that need RFC2047 + quoting. + + * Call to discard_cache/discard_index (used when we use different + contents of the index in-core, in many operations like commit, + apply, and merge) used to leak memory that held the array of index + entries, which has been plugged. + (merge a0fc4db rs/discard-index-discard-array later to maint). + + * "gitweb" forgot to clear a global variable $search_regexp upon each + request, mistakenly carrying over the previous search to a new one + when used as a persistent CGI. + + * The wildmatch engine did not honor WM_CASEFOLD option correctly. + + * "git log -c --follow $path" segfaulted upon hitting the commit that + renamed the $path being followed. + + * When a reflog notation is used for implicit "current branch", we + did not say which branch and worse said "branch ''". + + * "difftool --dir-diff" did not copy back changes made by the + end-user in the diff tool backend to the working tree in some + cases. + + * "git push $there HEAD:branch" did not resolve HEAD early enough, so + it was easy to flip it around while push is still going on and push + out a branch that the user did not originally intended when the + command was started. + + * The bash prompt code (in contrib/) displayed the name of the branch + being rebased when "rebase -i/-m/-p" modes are in use, but not the + plain vanilla "rebase". + + * Handling of negative exclude pattern for directories "!dir" was + broken in the update to v1.8.3. + + * zsh prompt script that borrowed from bash prompt script did not + work due to slight differences in array variable notation between + these two shells. + + * An entry for "file://" scheme in the enumeration of URL types Git + can take in the HTML documentation was made into a clickable link + by mistake. + + * "git push --[no-]verify" was not documented. + + * Stop installing the git-remote-testpy script that is only used for + testing. + + * "git commit --allow-empty-message -m ''" should not start an + editor. + + * "git merge @{-1}~22" was rewritten to "git merge frotz@{1}~22" + incorrectly when your previous branch was "frotz" (it should be + rewritten to "git merge frotz~22" instead). + + * "git diff -c -p" was not showing a deleted line from a hunk when + another hunk immediately begins where the earlier one ends. + + * "git log --ancestry-path A...B" did not work as expected, as it did + not pay attention to the fact that the merge base between A and B + was the bottom of the range being specified. + + * Mac OS X does not like to write(2) more than INT_MAX number of + bytes; work it around by chopping write(2) into smaller pieces. + + * Newer MacOS X encourages the programs to compile and link with + their CommonCrypto, not with OpenSSL. + + * "git clone foo/bar:baz" cannot be a request to clone from a remote + over git-over-ssh specified in the scp style. This case is now + detected and clones from a local repository at "foo/bar:baz". + + * When $HOME is misconfigured to point at an unreadable directory, we + used to complain and die. Loosen the check. + + * "git subtree" (in contrib/) had one codepath with loose error + checks to lose data at the remote side. + + * "git fetch" into a shallow repository from a repository that does + not know about the shallow boundary commits (e.g. a different fork + from the repository the current shallow repository was cloned from) + did not work correctly. + + * "git checkout foo" DWIMs the intended "upstream" and turns it into + "git checkout -t -b foo remotes/origin/foo". This codepath has been + updated to correctly take existing remote definitions into account. diff --git a/Documentation/RelNotes/1.8.5.1.txt b/Documentation/RelNotes/1.8.5.1.txt new file mode 100644 index 0000000..7236aaf --- /dev/null +++ b/Documentation/RelNotes/1.8.5.1.txt @@ -0,0 +1,9 @@ +Git v1.8.5.1 Release Notes +========================== + +Fixes since v1.8.5 +------------------ + + * "git submodule init" copied "submodule.$name.update" settings from + .gitmodules to .git/config without making sure if the suggested + value was sensible. diff --git a/Documentation/RelNotes/1.8.5.2.txt b/Documentation/RelNotes/1.8.5.2.txt new file mode 100644 index 0000000..3ac4984 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.2.txt @@ -0,0 +1,20 @@ +Git v1.8.5.2 Release Notes +========================== + +Fixes since v1.8.5.1 +-------------------- + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.8.5.3.txt b/Documentation/RelNotes/1.8.5.3.txt new file mode 100644 index 0000000..3de2dd0 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.3.txt @@ -0,0 +1,27 @@ +Git v1.8.5.3 Release Notes +========================== + +Fixes since v1.8.5.2 +-------------------- + + * The "--[no-]informative-errors" options to "git daemon" were parsed + a bit too loosely, allowing any other string after these option + names. + + * A "gc" process running as a different user should be able to stop a + new "gc" process from starting. + + * An earlier "clean-up" introduced an unnecessary memory leak to the + credential subsystem. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + + * "git rev-parse <revs> -- <paths>" did not implement the usual + disambiguation rules the commands in the "git log" family used in + the same way. + + * "git cat-file --batch=", an admittedly useless command, did not + behave very well. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.8.5.4.txt b/Documentation/RelNotes/1.8.5.4.txt new file mode 100644 index 0000000..d18c403 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.4.txt @@ -0,0 +1,48 @@ +Git v1.8.5.4 Release Notes +========================== + +Fixes since v1.8.5.3 +-------------------- + + * "git fetch --depth=0" was a no-op, and was silently ignored. + Diagnose it as an error. + + * Remote repository URL expressed in scp-style host:path notation are + parsed more carefully (e.g. "foo/bar:baz" is local, "[::1]:/~user" asks + to connect to user's home directory on host at address ::1. + + * SSL-related options were not passed correctly to underlying socket + layer in "git send-email". + + * "git commit -v" appends the patch to the log message before + editing, and then removes the patch when the editor returned + control. However, the patch was not stripped correctly when the + first modified path was a submodule. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + + * When we figure out how many file descriptors to allocate for + keeping packfiles open, a system with non-working getrlimit() could + cause us to die(), but because we make this call only to get a + rough estimate of how many is available and we do not even attempt + to use up all file descriptors available ourselves, it is nicer to + fall back to a reasonable low value rather than dying. + + * "git log --decorate" did not handle a tag pointed by another tag + nicely. + + * "git add -A" (no other arguments) in a totally empty working tree + used to emit an error. + + * There is no reason to have a hardcoded upper limit of the number of + parents for an octopus merge, created via the graft mechanism, but + there was. + + * The implementation of 'git stash $cmd "stash@{...}"' did not quote + the stash argument properly and left it split at IFS whitespace. + + * The documentation to "git pull" hinted there is an "-m" option + because it incorrectly shared the documentation with "git merge". + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.8.5.5.txt b/Documentation/RelNotes/1.8.5.5.txt new file mode 100644 index 0000000..9191ce9 --- /dev/null +++ b/Documentation/RelNotes/1.8.5.5.txt @@ -0,0 +1,37 @@ +Git v1.8.5.5 Release Notes +========================== + +Fixes since v1.8.5.4 +-------------------- + + * The pathspec matching code, while comparing two trees (e.g. "git + diff A B -- path1 path2") was too aggressive and failed to match + some paths when multiple pathspecs were involved. + + * "git repack --max-pack-size=8g" stopped being parsed correctly when + the command was reimplemented in C. + + * A recent update to "git send-email" broke platforms where + /etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path + (e.g. Fedora rawhide). + + * A handful of bugs around interpreting $branch@{upstream} notation + and its lookalike, when $branch part has interesting characters, + e.g. "@", and ":", have been fixed. + + * "git clone" would fail to clone from a repository that has a ref + directly under "refs/", e.g. "refs/stash", because different + validation paths do different things on such a refname. Loosen the + client side's validation to allow such a ref. + + * "git log --left-right A...B" lost the "leftness" of commits + reachable from A when A is a tag as a side effect of a recent + bugfix. This is a regression in 1.8.4.x series. + + * "git merge-base --octopus" used to leave cleaning up suboptimal + result to the caller, but now it does the clean-up itself. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + +Also contains typofixes, documentation updates and trivial code clean-ups. diff --git a/Documentation/RelNotes/1.8.5.txt b/Documentation/RelNotes/1.8.5.txt new file mode 100644 index 0000000..602df0c --- /dev/null +++ b/Documentation/RelNotes/1.8.5.txt @@ -0,0 +1,456 @@ +Git v1.8.5 Release Notes +======================== + +Backward compatibility notes (for Git 2.0) +------------------------------------------ + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics, which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + +The default prefix for "git svn" will change in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it will place them under refs/remotes/origin/ unless +it is told otherwise with its --prefix option. + + +Updates since v1.8.4 +-------------------- + +Foreign interfaces, subsystems and ports. + + * "git-svn" has been taught to use the serf library, which is the + only option SVN 1.8.0 offers us when talking the HTTP protocol. + + * "git-svn" talking over an https:// connection using the serf library + dumped core due to a bug in the serf library that SVN uses. Work + around it on our side, even though the SVN side is being fixed. + + * On MacOS X, we detected if the filesystem needs the "pre-composed + unicode strings" workaround, but did not automatically enable it. + Now we do. + + * remote-hg remote helper misbehaved when interacting with a local Hg + repository relative to the home directory, e.g. "clone hg::~/there". + + * imap-send ported to OS X uses Apple's security framework instead of + OpenSSL's. + + * "git fast-import" treats an empty path given to "ls" as the root of + the tree. + + +UI, Workflows & Features + + * xdg-open can be used as a browser backend for "git web-browse" + (hence to show "git help -w" output), when available. + + * "git grep" and "git show" pay attention to the "--textconv" option + when these commands are told to operate on blob objects (e.g. "git + grep -e pattern --textconv HEAD:Makefile"). + + * "git replace" helper no longer allows an object to be replaced with + another object of a different type to avoid confusion (you can + still manually craft such a replacement using "git update-ref", as an + escape hatch). + + * "git status" no longer prints the dirty status information of + submodules for which submodule.$name.ignore is set to "all". + + * "git rebase -i" honours core.abbrev when preparing the insn sheet + for editing. + + * "git status" during a cherry-pick shows which original commit is + being picked. + + * Instead of typing four capital letters "HEAD", you can say "@" now, + e.g. "git log @". + + * "git check-ignore" follows the same rule as "git add" and "git + status" in that the ignore/exclude mechanism does not take effect + on paths that are already tracked. With the "--no-index" option, it + can be used to diagnose which paths that should have been ignored + have been mistakenly added to the index. + + * Some irrelevant "advice" messages that are shared with "git status" + output have been removed from the commit log template. + + * "update-refs" learned a "--stdin" option to read multiple update + requests and perform them in an all-or-none fashion. + + * Just like "make -C <directory>", "git -C <directory> ..." tells Git + to go there before doing anything else. + + * Just like "git checkout -" knows to check out, and "git merge -" + knows to merge, the branch you were previously on, "git cherry-pick" + now understands "git cherry-pick -" to pick from the previous + branch. + + * "git status" now omits the prefix to make its output a comment in a + commit log editor, which is not necessary for human consumption. + Scripts that parse the output of "git status" are advised to use + "git status --porcelain" instead, as its format is stable and easier + to parse. + + * The ref syntax "foo^{tag}" (with the literal string "{tag}") peels a + tag ref to itself, i.e. it's a no-op., and fails if + "foo" is not a tag. "git rev-parse --verify v1.0^{tag}" is + a more convenient way than "test $(git cat-file -t v1.0) = tag" to + check if v1.0 is a tag. + + * "git branch -v -v" (and "git status") did not distinguish among a + branch that is not based on any other branch, a branch that is in + sync with its upstream branch, and a branch that is configured with an + upstream branch that no longer exists. + + * Earlier we started rejecting any attempt to add the 0{40} object name to + the index and to tree objects, but it sometimes is necessary to + allow this to be able to use tools like filter-branch to correct such + broken tree objects. "filter-branch" can again be used to do this. + + * "git config" did not provide a way to set or access numbers larger + than a native "int" on the platform; it now provides 64-bit signed + integers on all platforms. + + * "git pull --rebase" always chose to do the bog-standard flattening + rebase. You can tell it to run "rebase --preserve-merges" with + "git pull --rebase=preserve" or by + setting "pull.rebase" configuration to "preserve". + + * "git push --no-thin" actually disables the "thin pack transfer" + optimization. + + * Magic pathspecs like ":(icase)makefile" (matches both Makefile + and makefile) and ":(glob)foo/**/bar" (matches "bar" in "foo" + and any subdirectory of "foo") can be used in more places. + + * The "http.*" variables can now be specified for individual URLs. + For example, + + [http] + sslVerify = true + [http "https://weak.example.com/"] + sslVerify = false + + would flip http.sslVerify off only when talking to that specific + site. + + * "git mv A B" when moving a submodule has been taught to + relocate the submodule's working tree and to adjust the paths in the + .gitmodules file. + + * "git blame" can now take more than one -L option to discover the + origin of multiple blocks of lines. + + * The http transport clients can optionally ask to save cookies + with the http.savecookies configuration variable. + + * "git push" learned a more fine grained control over a blunt + "--force" when requesting a non-fast-forward update with the + "--force-with-lease=<refname>:<expected object name>" option. + + * "git diff --diff-filter=<classes of changes>" can now take + lowercase letters (e.g. "--diff-filter=d") to mean "show + everything but these classes". "git diff-files -q" is now a + deprecated synonym for "git diff-files --diff-filter=d". + + * "git fetch" (hence "git pull" as well) learned to check + "fetch.prune" and "remote.*.prune" configuration variables and + to behave as if the "--prune" command line option was given. + + * "git check-ignore -z" applied the NUL termination to both its input + (with --stdin) and its output, but "git check-attr -z" ignored the + option on the output side. Make both honor -z on the input and + output side the same way. + + * "git whatchanged" may still be used by old timers, but mention of + it in documents meant for new users will only waste readers' time + wondering what the difference is between it and "git log". Make it + less prominent in the general part of the documentation and explain + that it is merely a "git log" with different default behaviour in + its own document. + + +Performance, Internal Implementation, etc. + + * "git for-each-ref" when asking for merely the object name does not + have to parse the object pointed at by the refs; the codepath has + been optimized. + + * The HTTP transport will try to use TCP keepalive when able. + + * "git repack" is now written in C. + + * Build procedure for MSVC has been updated. + + * If a build-time fallback is set to "cat" instead of "less", we + should apply the same "no subprocess or pipe" optimization as we + apply to user-supplied GIT_PAGER=cat. + + * Many commands use a --dashed-option as an operation mode selector + (e.g. "git tag --delete") that excludes other operation modes + (e.g. "git tag --delete --verify" is nonsense) and that cannot be + negated (e.g. "git tag --no-delete" is nonsense). The parse-options + API learned a new OPT_CMDMODE macro to make it easier to implement + such a set of options. + + * OPT_BOOLEAN() in the parse-options API was misdesigned to be "counting + up" but many subcommands expect it to behave as "on/off". Update + them to use OPT_BOOL() which is a proper boolean. + + * "git gc" exits early without doing any work when it detects + that another instance of itself is already running. + + * Under memory pressure and/or file descriptor pressure, we used to + close pack windows that are not used and also closed filehandles to + open but unused packfiles. These are now controlled separately + to better cope with the load. + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.4 +------------------ + +Unless otherwise noted, all the fixes since v1.8.4 in the maintenance +track are contained in this release (see the maintenance releases' notes for +details). + + * An ancient How-To on serving Git repositories on an HTTP server + lacked a warning that it has been mostly superseded with a more + modern way. + (merge 6d52bc3 sc/doc-howto-dumb-http later to maint). + + * The interaction between the use of Perl in our test suite and NO_PERL + has been clarified a bit. + (merge f8fc0ee jn/test-prereq-perl-doc later to maint). + + * The synopsis section of the "git unpack-objects" documentation has been + clarified a bit. + (merge 61e2e22 vd/doc-unpack-objects later to maint). + + * We did not generate the HTML version of the documentation to "git subtree" + in contrib/. + (merge 95c62fb jk/subtree-install-fix later to maint). + + * A fast-import stream expresses a pathname with funny characters by + quoting them in C style; the remote-hg remote helper forgot to unquote + such a path. + (merge 1136265 ap/remote-hg-unquote-cquote later to maint). + + * "git reset -p HEAD" has a codepath to special-case it to behave + differently from resetting to contents of other commits, but a + recent change broke it. + + * Coloring around octopus merges in "log --graph" output was screwy. + (merge 339c17b hn/log-graph-color-octopus later to maint). + + * "git checkout topic", when there is not yet a local "topic" branch + but there is a unique remote-tracking branch for a remote "topic" + branch, pretended as if "git checkout -t -b topic remote/$r/topic" + (for that unique remote $r) was run. This hack however was not + implemented for "git checkout topic --". + (merge bca3969 mm/checkout-auto-track-fix later to maint). + + * One long-standing flaw in the pack transfer protocol used by "git + clone" was that there was no way to tell the other end which branch + "HEAD" points at, and the receiving end needed to guess. A new + capability has been defined in the pack protocol to convey this + information so that cloning from a repository with more than one + branch pointing at the same commit where the HEAD is at now + reliably sets the initial branch in the resulting repository. + (merge 360a326 jc/upload-pack-send-symref later to maint). + + * We did not handle cases where the http transport gets redirected during + the authorization request (e.g. from http:// to https://). + (merge 70900ed jk/http-auth-redirects later to maint). + + * Bash prompting code to deal with an SVN remote as an upstream + was coded in a way unsupported by older Bash versions (3.x). + (merge 52ec889 sg/prompt-svn-remote-fix later to maint). + + * The fall-back parsing of commit objects with broken author or + committer lines was less robust than ideal in picking up the + timestamps. + (merge 03818a4 jk/split-broken-ident later to maint). + + * "git rev-list --objects ^v1.0^ v1.0" gave the v1.0 tag itself in the + output, but "git rev-list --objects v1.0^..v1.0" did not. + (merge 895c5ba jc/revision-range-unpeel later to maint). + + * "git clone" wrote some progress messages to standard output, not + to standard error, and did not suppress them with the + --no-progress option. + (merge 643f918 jk/clone-progress-to-stderr later to maint). + + * "format-patch --from=<whom>" forgot to omit an unnecessary in-body + from line, i.e. when <whom> is the same as the real author. + (merge 662cc30 jk/format-patch-from later to maint). + + * "git shortlog" used to choke and die when there is a malformed + commit (e.g. missing authors); it now simply ignores such a commit + and keeps going. + (merge cd4f09e jk/shortlog-tolerate-broken-commit later to maint). + + * "git merge-recursive" did not parse its "--diff-algorithm=" command + line option correctly. + (merge 6562928 jk/diff-algo later to maint). + + * When running "fetch -q", a long silence while the sender side + computes the set of objects to send can be mistaken by proxies as + dropped connection. The server side has been taught to send a + small empty messages to keep the connection alive. + (merge 115dedd jk/upload-pack-keepalive later to maint). + + * "git rebase" had a portability regression in v1.8.4 that triggered a + bug in some BSD shell implementations. + (merge 99855dd mm/rebase-continue-freebsd-WB later to maint). + + * "git branch --track" had a minor regression in v1.8.3.2 and later + that made it impossible to base your local work on anything but a + local branch of the upstream repository you are tracking. + (merge b0f49ff jh/checkout-auto-tracking later to maint). + + * When the web server responds with "405 Method Not Allowed", "git + http-backend" should tell the client what methods are allowed with + the "Allow" header. + (merge 9247be0 bc/http-backend-allow-405 later to maint). + + * When there is no sufficient overlap between old and new history + during a "git fetch" into a shallow repository, objects that the + sending side knows the receiving end has were unnecessarily sent. + (merge f21d2a7 nd/fetch-into-shallow later to maint). + + * "git cvsserver" computed the permission mode bits incorrectly for + executable files. + (merge 1b48d56 jc/cvsserver-perm-bit-fix later to maint). + + * When send-email obtains an error message to die with upon + failure to start an SSL session, it tried to read the error string + from a wrong place. + (merge 6cb0c88 bc/send-email-ssl-die-message-fix later to maint). + + * The implementation of "add -i" has some crippling code to work around an + ActiveState Perl limitation but it by mistake also triggered on Git + for Windows where MSYS perl is used. + (merge df17e77 js/add-i-mingw later to maint). + + * We made sure that we notice when the user-supplied GIT_DIR is actually a + gitfile, but did not do the same when the default ".git" is a + gitfile. + (merge 487a2b7 nd/git-dir-pointing-at-gitfile later to maint). + + * When an object is not found after checking the packfiles and the + loose object directory, read_sha1_file() re-checks the packfiles to + prevent racing with a concurrent repacker; teach the same logic to + has_sha1_file(). + (merge 45e8a74 jk/has-sha1-file-retry-packed later to maint). + + * "git commit --author=$name", when $name is not in the canonical + "A. U. Thor <au.thor@example.xz>" format, looks for a matching name + from existing history, but did not consult mailmap to grab the + preferred author name. + (merge ea16794 ap/commit-author-mailmap later to maint). + + * "git ls-files -k" needs to crawl only the part of the working tree + that may overlap the paths in the index to find killed files, but + shared code with the logic to find all the untracked files, which + made it unnecessarily inefficient. + (merge 680be04 jc/ls-files-killed-optim later to maint). + + * The shortened commit object names in the insn sheet that is prepared at the + beginning of a "rebase -i" session can become ambiguous as the + rebasing progresses and the repository gains more commits. Make + sure the internal record is kept with full 40-hex object names. + (merge 75c6976 es/rebase-i-no-abbrev later to maint). + + * "git rebase --preserve-merges" internally used the merge machinery + and as a side effect left the merge summary message in the log, but + when rebasing there is no need for the merge summary. + (merge a9f739c rt/rebase-p-no-merge-summary later to maint). + + * A call to xread() was used without a loop around it to cope with short + reads in the codepath to stream new contents to a pack. + (merge e92527c js/xread-in-full later to maint). + + * "git rebase -i" forgot that the comment character is + configurable while reading its insn sheet. + (merge 7bca7af es/rebase-i-respect-core-commentchar later to maint). + + * The mailmap support code read past the allocated buffer when the + mailmap file ended with an incomplete line. + (merge f972a16 jk/mailmap-incomplete-line later to maint). + + * We used to send a large request to read(2)/write(2) as a single + system call, which was bad from the latency point of view when + the operation needs to be killed, and also triggered an error on + broken 64-bit systems that refuse to read or write more than 2GB + in one go. + (merge a487916 sp/clip-read-write-to-8mb later to maint). + + * "git fetch" that auto-followed tags incorrectly reused the + connection with Git-aware transport helper (like the sample "ext::" + helper shipped with Git). + (merge 0f73f8b jc/transport-do-not-use-connect-twice-in-fetch later to maint). + + * "git log --full-diff -- <pathspec>" showed a huge diff for paths + outside the given <pathspec> for each commit, instead of showing + the change relative to the parent of the commit. "git reflog -p" + had a similar problem. + (merge 838f9a1 tr/log-full-diff-keep-true-parents later to maint). + + * Setting a submodule.*.path configuration variable to true (without + giving "= value") caused Git to segfault. + (merge 4b05440 jl/some-submodule-config-are-not-boolean later to maint). + + * "git rebase -i" (there could be others, as the root cause is pretty + generic) fed a random, data dependent string to 'echo' and + expected it to come out literally, corrupting its error message. + (merge 89b0230 mm/no-shell-escape-in-die-message later to maint). + + * Some people still use rather old versions of bash, which cannot + grok some constructs like 'printf -v varname' which the prompt and + completion code started to use recently. + (merge a44aa69 bc/completion-for-bash-3.0 later to maint). + + * Code to read configuration from a blob object did not compile on + platforms with fgetc() etc. implemented as macros. + (merge 49d6cfa hv/config-from-blob later to maint-1.8.3). + + * The recent "short-cut clone connectivity check" topic broke a + shallow repository when a fetch operation tries to auto-follow tags. + (merge 6da8bdc nd/fetch-pack-shallow-fix later to maint-1.8.3). diff --git a/Documentation/RelNotes/1.9.0.txt b/Documentation/RelNotes/1.9.0.txt new file mode 100644 index 0000000..752d791 --- /dev/null +++ b/Documentation/RelNotes/1.9.0.txt @@ -0,0 +1,345 @@ +Git v1.9.0 Release Notes +======================== + +Backward compatibility notes +---------------------------- + +"git submodule foreach $cmd $args" used to treat "$cmd $args" the same +way "ssh" did, concatenating them into a single string and letting the +shell unquote. Careless users who forget to sufficiently quote $args +get their argument split at $IFS whitespaces by the shell, and got +unexpected results due to this. Starting from this release, the +command line is passed directly to the shell, if it has an argument. + +Read-only support for experimental loose-object format, in which users +could optionally choose to write their loose objects for a short +while between v1.4.3 and v1.5.3 era, has been dropped. + +The meanings of the "--tags" option to "git fetch" has changed; the +command fetches tags _in addition to_ what is fetched by the same +command line without the option. + +The way "git push $there $what" interprets the $what part given on the +command line, when it does not have a colon that explicitly tells us +what ref at the $there repository is to be updated, has been enhanced. + +A handful of ancient commands that have long been deprecated are +finally gone (repo-config, tar-tree, lost-found, and peek-remote). + + +Backward compatibility notes (for Git 2.0.0) +-------------------------------------------- + +When "git push [$there]" does not say what to push, we have used the +traditional "matching" semantics so far (all your branches were sent +to the remote as long as there already are branches of the same name +over there). In Git 2.0, the default will change to the "simple" +semantics, which pushes: + + - only the current branch to the branch with the same name, and only + when the current branch is set to integrate with that remote + branch, if you are pushing to the same remote as you fetch from; or + + - only the current branch to the branch with the same name, if you + are pushing to a remote that is not where you usually fetch from. + +Use the user preference configuration variable "push.default" to +change this. If you are an old-timer who is used to the "matching" +semantics, you can set the variable to "matching" to keep the +traditional behaviour. If you want to live in the future early, you +can set it to "simple" today without waiting for Git 2.0. + +When "git add -u" (and "git add -A") is run inside a subdirectory and +does not specify which paths to add on the command line, it +will operate on the entire tree in Git 2.0 for consistency +with "git commit -a" and other commands. There will be no +mechanism to make plain "git add -u" behave like "git add -u .". +Current users of "git add -u" (without a pathspec) should start +training their fingers to explicitly say "git add -u ." +before Git 2.0 comes. A warning is issued when these commands are +run without a pathspec and when you have local changes outside the +current directory, because the behaviour in Git 2.0 will be different +from today's version in such a situation. + +In Git 2.0, "git add <path>" will behave as "git add -A <path>", so +that "git add dir/" will notice paths you removed from the directory +and record the removal. Versions before Git 2.0, including this +release, will keep ignoring removals, but the users who rely on this +behaviour are encouraged to start using "git add --ignore-removal <path>" +now before 2.0 is released. + +The default prefix for "git svn" will change in Git 2.0. For a long +time, "git svn" created its remote-tracking branches directly under +refs/remotes, but it will place them under refs/remotes/origin/ unless +it is told otherwise with its --prefix option. + + +Updates since v1.8.5 +-------------------- + +Foreign interfaces, subsystems and ports. + + * The HTTP transport, when talking GSS-Negotiate, uses "100 + Continue" response to avoid having to rewind and resend a large + payload, which may not be always doable. + + * Various bugfixes to remote-bzr and remote-hg (in contrib/). + + * The build procedure is aware of MirBSD now. + + * Various "git p4", "git svn" and "gitk" updates. + + +UI, Workflows & Features + + * Fetching from a shallowly-cloned repository used to be forbidden, + primarily because the codepaths involved were not carefully vetted + and we did not bother supporting such usage. This release attempts + to allow object transfer out of a shallowly-cloned repository in a + more controlled way (i.e. the receiver becomes a shallow repository + with a truncated history). + + * Just like we give a reasonable default for "less" via the LESS + environment variable, we now specify a reasonable default for "lv" + via the "LV" environment variable when spawning the pager. + + * Two-level configuration variable names in "branch.*" and "remote.*" + hierarchies, whose variables are predominantly three-level, were + not completed by hitting a <TAB> in bash and zsh completions. + + * Fetching a 'frotz' branch with "git fetch", while a 'frotz/nitfol' + remote-tracking branch from an earlier fetch was still there, would + error out, primarily because the command was not told that it is + allowed to lose any information on our side. "git fetch --prune" + now can be used to remove 'frotz/nitfol' to make room for fetching and + storing the 'frotz' remote-tracking branch. + + * "diff.orderfile=<file>" configuration variable can be used to + pretend as if the "-O<file>" option were given from the command + line of "git diff", etc. + + * The negative pathspec syntax allows "git log -- . ':!dir'" to tell + us "I am interested in everything but 'dir' directory". + + * "git difftool" shows how many different paths there are in total, + and how many of them have been shown so far, to indicate progress. + + * "git push origin master" used to push our 'master' branch to update + the 'master' branch at the 'origin' repository. This has been + enhanced to use the same ref mapping "git push origin" would use to + determine what ref at the 'origin' to be updated with our 'master'. + For example, with this configuration + + [remote "origin"] + push = refs/heads/*:refs/review/* + + that would cause "git push origin" to push out our local branches + to corresponding refs under refs/review/ hierarchy at 'origin', + "git push origin master" would update 'refs/review/master' over + there. Alternatively, if push.default is set to 'upstream' and our + 'master' is set to integrate with 'topic' from the 'origin' branch, + running "git push origin" while on our 'master' would update their + 'topic' branch, and running "git push origin master" while on any + of our branches does the same. + + * "gitweb" learned to treat ref hierarchies other than refs/heads as + if they are additional branch namespaces (e.g. refs/changes/ in + Gerrit). + + * "git for-each-ref --format=..." learned a few formatting directives; + e.g. "%(color:red)%(HEAD)%(color:reset) %(refname:short) %(subject)". + + * The command string given to "git submodule foreach" is passed + directly to the shell, without being eval'ed. This is a backward + incompatible change that may break existing users. + + * "git log" and friends learned the "--exclude=<glob>" option, to + allow people to say "list history of all branches except those that + match this pattern" with "git log --exclude='*/*' --branches". + + * "git rev-parse --parseopt" learned a new "--stuck-long" option to + help scripts parse options with an optional parameter. + + * The "--tags" option to "git fetch" no longer tells the command to + fetch _only_ the tags. It instead fetches tags _in addition to_ + what are fetched by the same command line without the option. + + +Performance, Internal Implementation, etc. + + * When parsing a 40-hex string into the object name, the string is + checked to see if it can be interpreted as a ref so that a warning + can be given for ambiguity. The code kicked in even when the + core.warnambiguousrefs is set to false to squelch this warning, in + which case the cycles spent to look at the ref namespace were an + expensive no-op, as the result was discarded without being used. + + * The naming convention of the packfiles has been updated; it used to + be based on the enumeration of names of the objects that are + contained in the pack, but now it also depends on how the packed + result is represented---packing the same set of objects using + different settings (or delta order) would produce a pack with + different name. + + * "git diff --no-index" mode used to unnecessarily attempt to read + the index when there is one. + + * The deprecated parse-options macro OPT_BOOLEAN has been removed; + use OPT_BOOL or OPT_COUNTUP in new code. + + * A few duplicate implementations of prefix/suffix string comparison + functions have been unified to starts_with() and ends_with(). + + * The new PERLLIB_EXTRA makefile variable can be used to specify + additional directories Perl modules (e.g. the ones necessary to run + git-svn) are installed on the platform when building. + + * "git merge-base" learned the "--fork-point" mode, that implements + the same logic used in "git pull --rebase" to find a suitable fork + point out of the reflog entries for the remote-tracking branch the + work has been based on. "git rebase" has the same logic that can be + triggered with the "--fork-point" option. + + * A third-party "receive-pack" (the responder to "git push") can + advertise the "no-thin" capability to tell "git push" not to use + the thin-pack optimization. Our receive-pack has always been + capable of accepting and fattening a thin-pack, and will continue + not to ask "git push" to use a non-thin pack. + + +Also contains various documentation updates and code clean-ups. + + +Fixes since v1.8.5 +------------------ + +Unless otherwise noted, all the fixes since v1.8.5 in the maintenance +track are contained in this release (see the maintenance releases' notes +for details). + + * The pathspec matching code, while comparing two trees (e.g. "git + diff A B -- path1 path2") was too aggressive and failed to match + some paths when multiple pathspecs were involved. + + * "git repack --max-pack-size=8g" stopped being parsed correctly when + the command was reimplemented in C. + + * An earlier update in v1.8.4.x to "git rev-list --objects" with + negative ref had a performance regression. + (merge 200abe7 jk/mark-edges-uninteresting later to maint). + + * A recent update to "git send-email" broke platforms where + /etc/ssl/certs/ directory exists but cannot be used as SSL_ca_path + (e.g. Fedora rawhide). + + * A handful of bugs around interpreting $branch@{upstream} notation + and its lookalike, when $branch part has interesting characters, + e.g. "@", and ":", have been fixed. + + * "git clone" would fail to clone from a repository that has a ref + directly under "refs/", e.g. "refs/stash", because different + validation paths do different things on such a refname. Loosen the + client side's validation to allow such a ref. + + * "git log --left-right A...B" lost the "leftness" of commits + reachable from A when A is a tag as a side effect of a recent + bugfix. This is a regression in 1.8.4.x series. + + * documentations to "git pull" hinted there is an "-m" option because + it incorrectly shared the documentation with "git merge". + + * "git diff A B submod" and "git diff A B submod/" ought to have done + the same for a submodule "submod", but didn't. + + * "git clone $origin foo\bar\baz" on Windows failed to create the + leading directories (i.e. a moral-equivalent of "mkdir -p"). + + * "submodule.*.update=checkout", when propagated from .gitmodules to + .git/config, turned into a "submodule.*.update=none", which did not + make much sense. + (merge efa8fd7 fp/submodule-checkout-mode later to maint). + + * The implementation of 'git stash $cmd "stash@{...}"' did not quote + the stash argument properly and left it split at IFS whitespace. + + * The "--[no-]informative-errors" options to "git daemon" were parsed + a bit too loosely, allowing any other string after these option + names. + + * There is no reason to have a hardcoded upper limit for the number of + parents of an octopus merge, created via the graft mechanism, but + there was. + + * The basic test used to leave unnecessary trash directories in the + t/ directory. + (merge 738a8be jk/test-framework-updates later to maint). + + * "git merge-base --octopus" used to leave cleaning up suboptimal + result to the caller, but now it does the clean-up itself. + + * A "gc" process running as a different user should be able to stop a + new "gc" process from starting, but it didn't. + + * An earlier "clean-up" introduced an unnecessary memory leak. + + * "git add -A" (no other arguments) in a totally empty working tree + used to emit an error. + + * "git log --decorate" did not handle a tag pointed by another tag + nicely. + + * When we figure out how many file descriptors to allocate for + keeping packfiles open, a system with non-working getrlimit() could + cause us to die(), but because we make this call only to get a + rough estimate of how many are available and we do not even attempt + to use up all available file descriptors ourselves, it is nicer to + fall back to a reasonable low value rather than dying. + + * read_sha1_file(), that is the workhorse to read the contents given + an object name, honoured object replacements, but there was no + corresponding mechanism to sha1_object_info() that was used to + obtain the metainfo (e.g. type & size) about the object. This led + callers to weird inconsistencies. + (merge 663a856 cc/replace-object-info later to maint). + + * "git cat-file --batch=", an admittedly useless command, did not + behave very well. + + * "git rev-parse <revs> -- <paths>" did not implement the usual + disambiguation rules the commands in the "git log" family used in + the same way. + + * "git mv A B/", when B does not exist as a directory, should error + out, but it didn't. + + * A workaround to an old bug in glibc prior to glibc 2.17 has been + retired; this would remove a side effect of the workaround that + corrupts system error messages in non-C locales. + + * SSL-related options were not passed correctly to underlying socket + layer in "git send-email". + + * "git commit -v" appends the patch to the log message before + editing, and then removes the patch when the editor returned + control. However, the patch was not stripped correctly when the + first modified path was a submodule. + + * "git fetch --depth=0" was a no-op, and was silently ignored. + Diagnose it as an error. + + * Remote repository URLs expressed in scp-style host:path notation are + parsed more carefully (e.g. "foo/bar:baz" is local, "[::1]:/~user" asks + to connect to user's home directory on host at address ::1. + + * "git diff -- ':(icase)makefile'" was unnecessarily rejected at the + command line parser. + + * "git cat-file --batch-check=ok" did not check the existence of + the named object. + + * "git am --abort" sometimes complained about not being able to write + a tree with an 0{40} object in it. + + * Two processes creating loose objects at the same time could have + failed unnecessarily when the name of their new objects started + with the same byte value, due to a race condition. |